Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1791 files changed, 633306 insertions, 0 deletions

diff --git a/arch/arm64/boot/.gitignore b/arch/arm64/boot/.gitignore
new file mode 100644
index 0000000000..af5dc61f8b
--- /dev/null
+++ b/arch/arm64/boot/.gitignore
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+Image
+Image.gz
+vmlinuz*
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
new file mode 100644
index 0000000000..1761f59724
--- /dev/null
+++ b/arch/arm64/boot/Makefile
@@ -0,0 +1,50 @@
+#
+# arch/arm64/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2012, ARM Ltd.
+# Author: Will Deacon <will.deacon@arm.com>
+#
+# Based on the ia64 boot/Makefile.
+#
+
+OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo Image.zst
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/Image.bz2: $(obj)/Image FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/Image.gz: $(obj)/Image FORCE
+	$(call if_changed,gzip)
+
+$(obj)/Image.lz4: $(obj)/Image FORCE
+	$(call if_changed,lz4)
+
+$(obj)/Image.lzma: $(obj)/Image FORCE
+	$(call if_changed,lzma)
+
+$(obj)/Image.lzo: $(obj)/Image FORCE
+	$(call if_changed,lzo)
+
+$(obj)/Image.zst: $(obj)/Image FORCE
+	$(call if_changed,zstd)
+
+EFI_ZBOOT_PAYLOAD	:= Image
+EFI_ZBOOT_BFD_TARGET	:= elf64-littleaarch64
+EFI_ZBOOT_MACH_TYPE	:= ARM64
+EFI_ZBOOT_FORWARD_CFI	:= $(CONFIG_ARM64_BTI_KERNEL)
+
+EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$(shell \
+				$(NM) vmlinux|grep _kernel_codesize|cut -d' ' -f1)
+
+include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
new file mode 100644
index 0000000000..30dd6347a9
--- /dev/null
+++ b/arch/arm64/boot/dts/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += actions
+subdir-y += allwinner
+subdir-y += altera
+subdir-y += amazon
+subdir-y += amd
+subdir-y += amlogic
+subdir-y += apm
+subdir-y += apple
+subdir-y += arm
+subdir-y += bitmain
+subdir-y += broadcom
+subdir-y += cavium
+subdir-y += exynos
+subdir-y += freescale
+subdir-y += hisilicon
+subdir-y += intel
+subdir-y += lg
+subdir-y += marvell
+subdir-y += mediatek
+subdir-y += microchip
+subdir-y += nuvoton
+subdir-y += nvidia
+subdir-y += qcom
+subdir-y += realtek
+subdir-y += renesas
+subdir-y += rockchip
+subdir-y += socionext
+subdir-y += sprd
+subdir-y += st
+subdir-y += synaptics
+subdir-y += tesla
+subdir-y += ti
+subdir-y += toshiba
+subdir-y += xilinx
diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile
new file mode 100644
index 0000000000..b57fd2372e
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb
+
+dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
new file mode 100644
index 0000000000..63e375cd9e
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "s700.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard7", "actions,s700";
+	model = "CubieBoard7";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	memory@1,e0000000 {
+		device_type = "memory";
+		reg = <0x1 0xe0000000 0x0 0x0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_default>;
+};
+
+&pinctrl {
+	i2c0_default: i2c0_default {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_default: i2c1_default {
+		pinmux {
+			groups = "i2c1_dummy";
+			function = "i2c1";
+		};
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_default: i2c2_default {
+		pinmux {
+			groups = "i2c2_dummy";
+			function = "i2c2";
+		};
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
new file mode 100644
index 0000000000..2c78caebf5
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s700-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s700-powergate.h>
+#include <dt-bindings/reset/actions,s700-reset.h>
+
+/ {
+	compatible = "actions,s700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		cmu: clock-controller@e0168000 {
+			compatible = "actions,s700-cmu";
+			reg = <0x0 0xe0168000 0x0 0x1000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@e0170000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e0174000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e0178000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e017c000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe017c000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sps: power-controller@e01b0100 {
+			compatible = "actions,s700-sps";
+			reg = <0x0 0xe01b0100 0x0 0x100>;
+			#power-domain-cells = <1>;
+		};
+
+		timer: timer@e024c000 {
+			compatible = "actions,s700-timer";
+			reg = <0x0 0xe024c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s700-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x100>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 136>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@e0230000 {
+			compatible = "actions,s700-dma";
+			reg = <0x0 0xe0230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <10>;
+			dma-requests = <44>;
+			clocks = <&cmu CLK_DMAC>;
+			power-domains = <&sps S700_PD_DMA>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
new file mode 100644
index 0000000000..59291e0ea1
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "s900.dtsi"
+
+/ {
+	compatible = "ucrobotics,bubblegum-96", "actions,s900";
+	model = "Bubblegum-96";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial5 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	/* Fixed regulator used in the absence of PMIC */
+	vcc_3v1: vcc-3v1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.1V";
+		regulator-min-microvolt = <3100000>;
+		regulator-max-microvolt = <3100000>;
+		regulator-always-on;
+	};
+
+	/* Fixed regulator used in the absence of PMIC */
+	sd_vcc: sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.1V";
+		regulator-min-microvolt = <3100000>;
+		regulator-max-microvolt = <3100000>;
+		regulator-always-on;
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_default>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "Schematics Bubblegum96"
+ * version v1.0
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Boards naming of a line and the schematic name of
+ * the same line are in conflict, the 96Boards specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. Only exception is the I2C lines for which the schematic
+ * naming has been preferred. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+&pinctrl {
+	gpio-line-names =
+		"GPIO-A", /* GPIO_0, LSEC pin 23 */
+		"GPIO-B", /* GPIO_1, LSEC pin 24 */
+		"GPIO-C", /* GPIO_2, LSEC pin 25 */
+		"GPIO-D", /* GPIO_3, LSEC pin 26 */
+		"GPIO-E", /* GPIO_4, LSEC pin 27 */
+		"GPIO-F", /* GPIO_5, LSEC pin 28 */
+		"GPIO-G", /* GPIO_6, LSEC pin 29 */
+		"GPIO-H", /* GPIO_7, LSEC pin 30 */
+		"GPIO-I", /* GPIO_8, LSEC pin 31 */
+		"GPIO-J", /* GPIO_9, LSEC pin 32 */
+		"NC", /* GPIO_10 */
+		"NC", /* GPIO_11 */
+		"SIRQ2_1V8", /* GPIO_12 */
+		"PCM0_OUT", /* GPIO_13 */
+		"WIFI_LED", /* GPIO_14 */
+		"PCM0_SYNC", /* GPIO_15 */
+		"PCM0_CLK", /* GPIO_16 */
+		"PCM0_IN", /* GPIO_17 */
+		"BT_LED", /* GPIO_18 */
+		"LED0", /* GPIO_19 */
+		"LED1", /* GPIO_20 */
+		"JTAG_TCK", /* GPIO_21 */
+		"JTAG_TMS", /* GPIO_22 */
+		"JTAG_TDI", /* GPIO_23 */
+		"JTAG_TDO", /* GPIO_24 */
+		"[UART1_RxD]", /* GPIO_25, LSEC pin 13 */
+		"NC", /* GPIO_26 */
+		"[UART1_TxD]", /* GPIO_27, LSEC pin 11 */
+		"SD0_D0", /* GPIO_28 */
+		"SD0_D1", /* GPIO_29 */
+		"SD0_D2", /* GPIO_30 */
+		"SD0_D3", /* GPIO_31 */
+		"SD1_D0", /* GPIO_32 */
+		"SD1_D1", /* GPIO_33 */
+		"SD1_D2", /* GPIO_34 */
+		"SD1_D3", /* GPIO_35 */
+		"SD0_CMD", /* GPIO_36 */
+		"SD0_CLK", /* GPIO_37 */
+		"SD1_CMD", /* GPIO_38 */
+		"SD1_CLK", /* GPIO_39 */
+		"SPI0_SCLK", /* GPIO_40, LSEC pin 8 */
+		"SPI0_CS", /* GPIO_41, LSEC pin 12 */
+		"SPI0_DIN", /* GPIO_42, LSEC pin 10 */
+		"SPI0_DOUT", /* GPIO_43, LSEC pin 14 */
+		"I2C5_SDATA", /* GPIO_44, HSEC pin 36 */
+		"I2C5_SCLK", /* GPIO_45, HSEC pin 38 */
+		"UART0_RX", /* GPIO_46, LSEC pin 7 */
+		"UART0_TX", /* GPIO_47, LSEC pin 5 */
+		"UART0_RTSB", /* GPIO_48, LSEC pin 9 */
+		"UART0_CTSB", /* GPIO_49, LSEC pin 3 */
+		"I2C4_SCLK", /* GPIO_50, HSEC pin 32 */
+		"I2C4_SDATA", /* GPIO_51, HSEC pin 34 */
+		"I2C0_SCLK", /* GPIO_52 */
+		"I2C0_SDATA", /* GPIO_53 */
+		"I2C1_SCLK", /* GPIO_54, LSEC pin 15 */
+		"I2C1_SDATA", /* GPIO_55, LSEC pin 17 */
+		"I2C2_SCLK", /* GPIO_56, LSEC pin 19 */
+		"I2C2_SDATA", /* GPIO_57, LSEC pin 21 */
+		"CSI0_DN0", /* GPIO_58, HSEC pin 10 */
+		"CSI0_DP0", /* GPIO_59, HSEC pin 8 */
+		"CSI0_DN1", /* GPIO_60, HSEC pin 16 */
+		"CSI0_DP1", /* GPIO_61, HSEC pin 14 */
+		"CSI0_CN", /* GPIO_62, HSEC pin 4 */
+		"CSI0_CP", /* GPIO_63, HSEC pin 2 */
+		"CSI0_DN2", /* GPIO_64, HSEC pin 22 */
+		"CSI0_DP2", /* GPIO_65, HSEC pin 20 */
+		"CSI0_DN3", /* GPIO_66, HSEC pin 28 */
+		"CSI0_DP3", /* GPIO_67, HSEC pin 26 */
+		"[CLK0]", /* GPIO_68, HSEC pin 15 */
+		"CSI1_DN0", /* GPIO_69, HSEC pin 44 */
+		"CSI1_DP0", /* GPIO_70, HSEC pin 42 */
+		"CSI1_DN1", /* GPIO_71, HSEC pin 50 */
+		"CSI1_DP1", /* GPIO_72, HSEC pin 48 */
+		"CSI1_CN", /* GPIO_73, HSEC pin 56 */
+		"CSI1_CP", /* GPIO_74, HSEC pin 54 */
+		"[CLK1]", /* GPIO_75, HSEC pin 17 */
+		"[GPIOD0]", /* GPIO_76 */
+		"[GPIOD1]", /* GPIO_77 */
+		"BT_RST_N", /* GPIO_78 */
+		"EXT_DC_EN", /* GPIO_79 */
+		"[PCM_DI]", /* GPIO_80, LSEC pin 22 */
+		"[PCM_DO]", /* GPIO_81, LSEC pin 20 */
+		"[PCM_CLK]", /* GPIO_82, LSEC pin 18 */
+		"[PCM_FS]", /* GPIO_83, LSEC pin 16 */
+		"WAKE_BT", /* GPIO_84 */
+		"WL_REG_ON", /* GPIO_85 */
+		"NC", /* GPIO_86 */
+		"NC", /* GPIO_87 */
+		"NC", /* GPIO_88 */
+		"NC", /* GPIO_89 */
+		"NC", /* GPIO_90 */
+		"WIFI_WAKE", /* GPIO_91 */
+		"BT_WAKE", /* GPIO_92 */
+		"NC", /* GPIO_93 */
+		"OTG_EN2", /* GPIO_94 */
+		"OTG_EN", /* GPIO_95 */
+		"DSI_DP3", /* GPIO_96, HSEC pin 45 */
+		"DSI_DN3", /* GPIO_97, HSEC pin 47 */
+		"DSI_DP1", /* GPIO_98, HSEC pin 33 */
+		"DSI_DN1", /* GPIO_99, HSEC pin 35 */
+		"DSI_CP", /* GPIO_100, HSEC pin 21 */
+		"DSI_CN", /* GPIO_101, HSEC pin 23 */
+		"DSI_DP0", /* GPIO_102, HSEC pin 27 */
+		"DSI_DN0", /* GPIO_103, HSEC pin 29 */
+		"DSI_DP2", /* GPIO_104, HSEC pin 39 */
+		"DSI_DN2", /* GPIO_105, HSEC pin 41 */
+		"N0_D0", /* GPIO_106 */
+		"N0_D1", /* GPIO_107 */
+		"N0_D2", /* GPIO_108 */
+		"N0_D3", /* GPIO_109 */
+		"N0_D4", /* GPIO_110 */
+		"N0_D5", /* GPIO_111 */
+		"N0_D6", /* GPIO_112 */
+		"N0_D7", /* GPIO_113 */
+		"N0_DQS", /* GPIO_114 */
+		"N0_DQSN", /* GPIO_115 */
+		"NC", /* GPIO_116 */
+		"NC", /* GPIO_117 */
+		"NC", /* GPIO_118 */
+		"N0_CEB1", /* GPIO_119 */
+		"CARD_DT", /* GPIO_120 */
+		"N0_CEB3", /* GPIO_121 */
+		"SD_DAT0", /* GPIO_122, HSEC pin 1 */
+		"SD_DAT1", /* GPIO_123, HSEC pin 3 */
+		"SD_DAT2", /* GPIO_124, HSEC pin 5 */
+		"SD_DAT3", /* GPIO_125, HSEC pin 7 */
+		"NC", /* GPIO_126 */
+		"NC", /* GPIO_127 */
+		"[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */
+		"[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */
+		"NC", /* GPIO_130 */
+		"SD_CMD", /* GPIO_131 */
+		"GPIO-L", /* GPIO_132, LSEC pin 34 */
+		"GPIO-K", /* GPIO_133, LSEC pin 33 */
+		"NC", /* GPIO_134 */
+		"SD_SCLK", /* GPIO_135 */
+		"NC", /* GPIO_136 */
+		"JTAG_TRST", /* GPIO_137 */
+		"I2C3_SCLK", /* GPIO_138 */
+		"LED2", /* GPIO_139 */
+		"LED3", /* GPIO_140 */
+		"I2C3_SDATA", /* GPIO_141 */
+		"UART3_RX", /* GPIO_142 */
+		"UART3_TX", /* GPIO_143 */
+		"UART3_RTSB", /* GPIO_144 */
+		"UART3_CTSB"; /* GPIO_145 */
+
+	i2c0_default: i2c0-default {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_default: i2c1-default {
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_default: i2c2-default {
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default: mmc0_default {
+		pinmux {
+			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+				 "sd0_cmd_mfp", "sd0_clk_mfp";
+			function = "sd0";
+		};
+	};
+
+	mmc2_default: mmc2_default {
+		pinmux {
+			groups = "nand0_d0_ceb3_mfp";
+			function = "sd2";
+		};
+	};
+};
+
+/* uSD */
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_default>;
+	no-sdio;
+	no-mmc;
+	no-1-8-v;
+	cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&sd_vcc>;
+	vqmmc-supply = <&sd_vcc>;
+};
+
+/* eMMC */
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_default>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	bus-width = <8>;
+	vmmc-supply = <&vcc_3v1>;
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi
new file mode 100644
index 0000000000..eb35cf78ab
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s900.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s900-reset.h>
+
+/ {
+	compatible = "actions,s900";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	diff24M: diff24M {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sps: power-controller@e012e000 {
+			compatible = "actions,s900-sps";
+			reg = <0x0 0xe012e000 0x0 0x2000>;
+			#power-domain-cells = <1>;
+		};
+
+		cmu: clock-controller@e0160000 {
+			compatible = "actions,s900-cmu";
+			reg = <0x0 0xe0160000 0x0 0x1000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@e0170000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e0172000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0172000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e0174000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e0176000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0176000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e0178000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e017a000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe017a000 0 0x1000>;
+			clocks = <&cmu CLK_I2C5>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s900-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer: timer@e0228000 {
+			compatible = "actions,s900-timer";
+			reg = <0x0 0xe0228000 0x0 0x8000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		dma: dma-controller@e0260000 {
+			compatible = "actions,s900-dma";
+			reg = <0x0 0xe0260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+		};
+
+		mmc0: mmc@e0330000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0330000 0x0 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@e0334000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0334000 0x0 0x4000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@e0338000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0338000 0x0 0x4000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc3: mmc@e033c000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe033c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD3>;
+			resets = <&cmu RESET_SD3>;
+			dmas = <&dma 46>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
new file mode 100644
index 0000000000..3b0ad54062
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5205-5inmfd.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino-emmc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-beelink-gs1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
new file mode 100644
index 0000000000..a6b4b87f18
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
+
+/*
+ * AXP803 Integrated Power Management Chip
+ * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
+ */
+
+&axp803 {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp803-ac-power-supply",
+			     "x-powers,axp813-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp803-adc", "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp803-battery-power-supply",
+			     "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dcdc6: dcdc6 {
+			regulator-name = "dcdc6";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_fldo1: fldo1 {
+			regulator-name = "fldo1";
+		};
+
+		reg_fldo2: fldo2 {
+			regulator-name = "fldo2";
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			regulator-name = "ldo-io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			regulator-name = "ldo-io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc-ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp803-usb-power-supply",
+			     "x-powers,axp813-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
new file mode 100644
index 0000000000..f5c5c14644
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-a100.dtsi"
+
+/{
+	model = "Allwinner A100 Perf1";
+	compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_dldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo3>;
+	 */
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp803: pmic@34 {
+		compatible = "x-powers,axp803";
+		reg = <0x34>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dram-1";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-pl";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io-usb-pd-emmc-nand-card";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	/*
+	 * FIXME: update min and max before support dvfs.
+	 */
+	regulator-min-microvolt = <500000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <950000>;
+	regulator-name = "vdd-sys-usb-dram";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram-2";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg-dcxo-wifi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe-csi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "ldo-avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avcc-csi";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pc-lvds-csi-efuse-emmc-nand";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-mipi-lcd";
+};
+
+&reg_fldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-cpus-usb";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
new file mode 100644
index 0000000000..a3dccf1937
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-a100-ccu.h>
+#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	dcxo24M: dcxo24M-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "dcxo24M";
+		#clock-cells = <0>;
+	};
+
+	iosc: internal-osc-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <16000000>;
+		clock-accuracy = <300000000>;
+		clock-output-names = "iosc";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "osc32k";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x3fffffff>;
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-a100-ccu";
+			reg = <0x03001000 0x1000>;
+			clocks = <&dcxo24M>, <&osc32k>, <&iosc>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-a100-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			resets = <&ccu RST_BUS_DMA>;
+			dma-channels = <8>;
+			dma-requests = <52>;
+			#dma-cells = <1>;
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
+			      <0x03024000 0x2000>, <0x03026000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		efuse@3006000 {
+			compatible = "allwinner,sun50i-a100-sid",
+				     "allwinner,sun50i-a64-sid";
+			reg = <0x03006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: calib@14 {
+				reg = <0x14 8>;
+			};
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-a100-pinctrl";
+			reg = <0x0300b000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				function = "uart0";
+			};
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@5001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			dmas = <&dma 43>, <&dma 43>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			dmas = <&dma 44>, <&dma 44>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			dmas = <&dma 45>, <&dma 45>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@5002c00 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002c00 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			dmas = <&dma 46>, <&dma 46>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-a100-ths";
+			reg = <0x05070400 0x100>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-a100-r-ccu";
+			reg = <0x07010000 0x300>;
+			clocks = <&dcxo24M>, <&osc32k>, <&iosc>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun50i-a100-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x07010320 0xc>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-a100-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c0_pins: r-i2c0-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c0";
+			};
+
+			r_i2c1_pins: r-i2c1-pins {
+				pins = "PL8", "PL9";
+				function = "s_i2c1";
+			};
+		};
+
+		r_uart: serial@7080000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07080000 0x400>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_R_APB2_UART>;
+			resets = <&r_ccu RST_R_APB2_UART>;
+			status = "disabled";
+		};
+
+		r_i2c0: i2c@7081400 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C0>;
+			resets = <&r_ccu RST_R_APB2_I2C0>;
+			dmas = <&dma 50>, <&dma 50>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_i2c1: i2c@7081800 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081800 0x400>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C1>;
+			resets = <&r_ccu RST_R_APB2_I2C1>;
+			dmas = <&dma 51>, <&dma 51>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
new file mode 100644
index 0000000000..8233582f62
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Amarula A64-Relic";
+	compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_aldo1>;
+			DOVDD-supply = <&reg_dldo3>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */
+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+	status = "okay";
+
+	port {
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	sensor@48 {
+		compatible = "st,stlm75";
+		reg = <0x48>;
+	};
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt5663";
+		reg = <0x5d>;
+		AVDD28-supply = <&reg_ldo_io0>;			/* VCC-CTP: GPIO0-LDO */
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;	/* CTP-INT: PH4 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;	/* CTP-RST: PH8 */
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	/*
+	 * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
+	 * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
+	 * 0Ohm register to vcc-io-wifi so eldo1 is used.
+	 */
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;	/* WL-WAKE-AP: PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
new file mode 100644
index 0000000000..e6d5bc0f7a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BananaPi-M64";
+	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapi-m64:red:pwr";
+			gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "bananapi-m64:green:user";
+			gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */
+		};
+
+		led-2 {
+			label = "bananapi-m64:blue:user";
+			gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	/*
+	 * This regulator also drives the PE pingroup GPIOs,
+	 * which also controls two LEDs.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "afvcc-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	/*
+	 * This regulator also indirectly drives the PD pingroup GPIOs,
+	 * which also controls the power LED.
+	 */
+	regulator-always-on;
+	regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Microphone Jack",
+				    "Microphone", "Onboard Microphone";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Headphone Jack", "HP",
+			"MIC2", "Microphone Jack",
+			"Onboard Microphone", "MBIAS",
+			"MIC1", "Onboard Microphone";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo4>;
+		device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
new file mode 100644
index 0000000000..e39db51eb4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Vasily khoruzhick <anarsoul@gmail.com>
+ */
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1120000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1160000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1240000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1260000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
new file mode 100644
index 0000000000..0af6dcdf75
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi A64";
+	compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "nanopi-a64:blue:status";
+			gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+/* i2c1 connected with gpio headers like pine64, bananapi */
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8189etv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pg-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
new file mode 100644
index 0000000000..577f9e1d08
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Oceanic Systems (UK) Ltd.
+// Copyright (C) 2019 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+	model = "Oceanic 5205 5inMFD";
+	compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dc1sw>;
+	allwinner,tx-delay-ps = <600>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		AVDD28-supply = <&reg_ldo_io0>;			/* VDD_CTP: GPIO0-LDO */
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;	/* CTP-INT: PH4 */
+		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;	/* CTP-RST: PH11 */
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-phy";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vdd-ctp";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
new file mode 100644
index 0000000000..efb20846de
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
+// Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
+
+#include "sun50i-a64-olinuxino.dts"
+
+/ {
+	model = "Olimex A64-Olinuxino-eMMC";
+	compatible = "olimex,a64-olinuxino-emmc", "allwinner,sun50i-a64";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
new file mode 100644
index 0000000000..bfb806cf6d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A64-Olinuxino";
+	compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "a64-olinuxino:red:user";
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc1>;
+	allwinner,tx-delay-ps = <600>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo4>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&pio {
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;	/* set N_VBUSEN as output pin */
+	};
+};
+
+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
+/* interface used to talk to the PMIC in on the PL pins */
+/* &r_pio { */
+/*	vcc-pl-supply = <&reg_aldo2>; */
+/* }; */
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
+ * 1.35V that the PMIC can drive.
+ */
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1360000>;
+	regulator-max-microvolt = <1360000>;
+	regulator-name = "vcc-ddr3";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack Left",
+		    "Microphone", "Microphone Jack Right",
+		    "Headphone", "Headphone Jack";
+	simple-audio-card,routing = "Left DAC", "DACL",
+		    "Right DAC", "DACR",
+		    "Headphone Jack", "HP",
+		    "ADCL", "Left ADC",
+		    "ADCR", "Right ADC",
+		    "Microphone Jack Left", "MBIAS",
+		    "MIC1", "Microphone Jack Left",
+		    "Microphone Jack Right", "MBIAS",
+		    "MIC2", "Microphone Jack Right";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
new file mode 100644
index 0000000000..4f8529d5ac
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Win/Win Plus";
+	compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:status";
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "afvcc-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Microphone Jack",
+				    "Microphone", "Onboard Microphone";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Headphone Jack", "HP",
+			"MIC2", "Microphone Jack",
+			"Onboard Microphone", "MBIAS",
+			"MIC1", "Onboard Microphone";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+		status = "okay";
+	};
+};
+
+/* On debug connector */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo4>;
+		device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
new file mode 100644
index 0000000000..596a259074
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2018 ARM Ltd.
+
+#include <dt-bindings/leds/common.h>
+#include "sun50i-a64-sopine-baseboard.dts"
+
+/ {
+	model = "Pine64 LTS";
+	compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
+		     "allwinner,sun50i-a64";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		};
+	};
+};
+
+&mmc0 {
+	broken-cd;		/* card detect is broken on *some* boards */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
new file mode 100644
index 0000000000..b54099b654
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
+
+#include "sun50i-a64-pine64.dts"
+
+/ {
+	model = "Pine64+";
+	compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
+
+	/* TODO: Camera, touchscreen, etc. */
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
new file mode 100644
index 0000000000..2accb5ddf7
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Pine64";
+	compatible = "pine64,pine64", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&ext_rmii_phy1>;
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mdio {
+	ext_rmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can
+ * work at 1.35V with less power consumption.
+ * As AXP803 DCDC5 cannot reach 1.35V accurately, use 1.36V instead.
+ */
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1360000>;
+	regulator-max-microvolt = <1360000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"MIC2", "Microphone Jack";
+	status = "okay";
+};
+
+/* On Euler connector */
+&spdif {
+	status = "disabled";
+};
+
+/* On Exp and Euler connectors */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
new file mode 100644
index 0000000000..50ed2e9f10
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Pinebook";
+	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 0>;
+		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
+		default-brightness-level = <2>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+		power-supply = <&reg_vbklt>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid Switch";
+			gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	panel_edp: panel-edp {
+		compatible = "neweast,wjfh116008a";
+		backlight = <&backlight>;
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_edp_in: endpoint {
+				remote-endpoint = <&anx6345_out_edp>;
+			};
+		};
+	};
+
+	reg_vbklt: vbklt {
+		compatible = "regulator-fixed";
+		regulator-name = "vbklt";
+		regulator-min-microvolt = <18000000>;
+		regulator-max-microvolt = <18000000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		VCC-supply = <&reg_vcc5v0>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mixer0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	max-frequency = <200000000>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_eldo1>;
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_i2c {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_i2c_pl89_pins>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_fldo1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			anx6345_in: port@0 {
+				reg = <0>;
+				anx6345_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+
+			anx6345_out: port@1 {
+				reg = <1>;
+				anx6345_out_edp: endpoint {
+					remote-endpoint = <&panel_edp_in>;
+				};
+			};
+		};
+	};
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-edp";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	panel-supply = <&reg_dc1sw>;
+	dvdd25-supply = <&reg_dldo2>;
+	dvdd12-supply = <&reg_fldo1>;
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+				    "Microphone", "Internal Microphone Right",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Internal Microphone Left", "MBIAS",
+			"MIC1", "Internal Microphone Left",
+			"Internal Microphone Right", "HBIAS",
+			"MIC2", "Internal Microphone Right";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint {
+		remote-endpoint = <&anx6345_in_tcon0>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "host";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
new file mode 100644
index 0000000000..219f720b8b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Developer Batch (1.0)";
+	compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64";
+};
+
+&codec_analog {
+	allwinner,internal-bias-resistor;
+};
+
+&sgm3140 {
+	enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+	flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
new file mode 100644
index 0000000000..723af64a9c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Braveheart (1.1)";
+	compatible = "pine64,pinephone-1.1", "pine64,pinephone", "allwinner,sun50i-a64";
+};
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since
+	 * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
+	 * being off is around 20%. Duty cycle for the lowest brightness level
+	 * also varries quite a bit between individual boards, so the lowest
+	 * value here was chosen as a safe default.
+	 */
+	brightness-levels = <
+		774  793  814  842
+		882  935  1003 1088
+		1192 1316 1462 1633
+		1830 2054 2309 2596
+		2916 3271 3664 4096>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <400>;
+};
+
+&codec_analog {
+	allwinner,internal-bias-resistor;
+};
+
+&sgm3140 {
+	enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
new file mode 100644
index 0000000000..4e7e237cb4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone (1.2)";
+	compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64";
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since 1.0,
+	 * and the lowest PWM duty cycle that doesn't lead to backlight being off
+	 * is around 10%. Duty cycle for the lowest brightness level also varries
+	 * quite a bit between individual boards, so the lowest value here was
+	 * chosen as a safe default.
+	 */
+	brightness-levels = <
+		5000 5248 5506 5858 6345
+		6987 7805 8823 10062 11543
+		13287 15317 17654 20319 23336
+		26724 30505 34702 39335 44427
+		50000
+	>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <500>;
+};
+
+&lis3mdl {
+	/*
+	 * Board revision 1.2 fixed routing of the interrupt to DRDY pin,
+	 * enable interrupts.
+	 */
+	interrupt-parent = <&pio>;
+	interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
+};
+
+&mmc1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+};
+
+&sgm3140 {
+	enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
new file mode 100644
index 0000000000..87847116ab
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		ethernet0 = &rtl8723cs;
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+		power-supply = <&reg_ps>;
+		/* Backlight configuration differs per PinePhone revision. */
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		#sound-dai-cells = <1>;
+		compatible = "linux,bt-sco";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+		};
+
+		led-2 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		};
+	};
+
+	reg_ps: ps-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ps";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	reg_vbat_wifi: vbat-wifi {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vbat-wifi";
+	};
+
+	sgm3140: led-controller {
+		compatible = "sgmicro,sgm3140";
+		vin-supply = <&reg_dcdc1>;
+
+		sgm3140_flash: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		vcc-supply = <&reg_dcdc1>;
+	};
+};
+
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&aif3_pins>;
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "xingbangda,xbd599";
+		reg = <0>;
+		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
+		iovcc-supply = <&reg_dldo2>;
+		vcc-supply = <&reg_ldo_io0>;
+		backlight = <&backlight>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt917s";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+		AVDD28-supply = <&reg_ldo_io0>;
+		VDDIO-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* Magnetometer */
+	lis3mdl: magnetometer@1e {
+		compatible = "st,lis3mdl-magn";
+		reg = <0x1e>;
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+
+	/* Light/proximity sensor */
+	light-sensor@48 {
+		compatible = "sensortek,stk3311";
+		reg = <0x48>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
+	};
+
+	/* Accelerometer/gyroscope */
+	accelerometer@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+};
+
+/* Connected to pogo pins (external spring based pinheader for user addons) */
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	wakeup-source;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_vbat_wifi>;
+	vqmmc-supply = <&reg_dldo4>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-mipi-io";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-lpddr";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd-ctp-stk";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8-typec";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,name = "PinePhone";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Earpiece",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Headphone Jack", "HP",
+			"Internal Earpiece", "EARPIECE",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+
+	simple-audio-card,dai-link@2 {
+		format = "dsp_a";
+		frame-master = <&link2_codec>;
+		bitclock-master = <&link2_codec>;
+		bitclock-inversion;
+
+		link2_cpu: cpu {
+			sound-dai = <&bt_sco_codec 0>;
+		};
+
+		link2_codec: codec {
+			sound-dai = <&codec 2>;
+			dai-tdm-slot-num = <1>;
+			dai-tdm-slot-width = <32>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+	};
+};
+
+/* Connected to the modem (hardware flow control can't be used) */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
new file mode 100644
index 0000000000..6265360ce6
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Icenowy Zheng <icenowy@aosc.io>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64-pinetab.dts"
+
+/ {
+	model = "PineTab, Early Adopter's version";
+	compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64";
+};
+
+&dsi {
+	/delete-node/ panel@0;
+
+	panel@0 {
+		compatible = "feixin,k101-im2byl02", "ilitek,ili9881c";
+		reg = <0>;
+		power-supply = <&reg_dc1sw>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
new file mode 100644
index 0000000000..0a5607f730
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PineTab, Development Sample";
+	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+	chassis-type = "tablet";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
+		default-brightness-level = <15>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+		power-supply = <&vdd_bl>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	i2c-csi {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Rear camera */
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_dldo3>;
+			DOVDD-supply = <&reg_aldo1>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vdd_bl: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+	status = "okay";
+
+	port {
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "feixin,k101-im2ba02";
+		reg = <0>;
+		avdd-supply = <&reg_dc1sw>;
+		dvdd-supply = <&reg_dc1sw>;
+		cvdd-supply = <&reg_ldo_io1>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		AVDD28-supply = <&reg_ldo_io1>;
+	};
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* TODO: add Bochs BMA223 accelerometer here */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mixer1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcca-1v8";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-enable-ramp-delay = <3500000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+				    "Microphone", "Internal Microphone Right",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Internal Microphone Left", "MBIAS",
+			"MIC1", "Internal Microphone Left",
+			"Internal Microphone Right", "HBIAS",
+			"MIC2", "Internal Microphone Right";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_ldo_io0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
new file mode 100644
index 0000000000..5e66ce1a33
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+	model = "SoPine with baseboard";
+	compatible = "pine64,sopine-baseboard", "pine64,sopine",
+		     "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc1v8: vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-name = "vcc-phy";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"MIC2", "Microphone Jack";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
new file mode 100644
index 0000000000..6d78a1c98f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	disable-wp;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-1v8-lpddr";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
new file mode 100644
index 0000000000..1128030e4c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) Harald Geyer <harald@ccbib.org>
+// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A64 Teres-I";
+	compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 0>;
+		power-supply = <&reg_dcdc1>;
+		brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>;
+		default-brightness-level = <5>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		framebuffer-lcd {
+			eDP25-supply = <&reg_dldo2>;
+			eDP12-supply = <&reg_dldo3>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid Switch";
+			gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "teres-i:green:capslock";
+			gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		};
+
+		led-1 {
+			label = "teres-i:green:numlock";
+			gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_dldo3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx6345_in: endpoint {
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+		};
+	};
+};
+
+&mixer0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_aldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dldo2>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;  /* No dedicated supply-pin for this */
+	vcc-pg-supply = <&reg_aldo2>;
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-ddr3";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pd";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-edp";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work with this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Headphone Jack", "HP",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&anx6345_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
new file mode 100644
index 0000000000..57ac18738c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -0,0 +1,1390 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// based on the Allwinner H3 dtsi:
+//    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_lcd: framebuffer-lcd {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0";
+			clocks = <&ccu CLK_TCON0>,
+				 <&display_clocks CLK_MIXER0>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-hdmi";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun50i-a64-display-engine";
+		allwinner,pipelines = <&mixer0>,
+				      <&mixer1>;
+		status = "disabled";
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+		};
+	};
+
+	osc24M: osc24M_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	osc32k: osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext-osc32k";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	sound: sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-a64-audio";
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+				"Left DAC", "DACL",
+				"Right DAC", "DACR",
+				"ADCL", "Left ADC",
+				"ADCR", "Right ADC";
+		status = "disabled";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			frame-master = <&link0_cpu>;
+			bitclock-master = <&link0_cpu>;
+			mclk-fs = <128>;
+
+			link0_cpu: cpu {
+				sound-dai = <&dai>;
+			};
+
+			link0_codec: codec {
+				sound-dai = <&codec 0>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		allwinner,erratum-unknown1;
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0_thermal: gpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+
+		gpu1_thermal: gpu1-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		bus@1000000 {
+			compatible = "allwinner,sun50i-a64-de2";
+			reg = <0x1000000 0x400000>;
+			allwinner,sram = <&de2_sram 1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1000000 0x400000>;
+
+			display_clocks: clock@0 {
+				compatible = "allwinner,sun50i-a64-de2-clk";
+				reg = <0x0 0x10000>;
+				clocks = <&ccu CLK_BUS_DE>,
+					 <&ccu CLK_DE>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&ccu RST_BUS_DE>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			rotate: rotate@20000 {
+				compatible = "allwinner,sun50i-a64-de2-rotate",
+					     "allwinner,sun8i-a83t-de2-rotate";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&display_clocks CLK_BUS_ROT>,
+					 <&display_clocks CLK_ROT>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_ROT>;
+			};
+
+			mixer0: mixer@100000 {
+				compatible = "allwinner,sun50i-a64-de2-mixer-0";
+				reg = <0x100000 0x100000>;
+				clocks = <&display_clocks CLK_BUS_MIXER0>,
+					 <&display_clocks CLK_MIXER0>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_MIXER0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					mixer0_out: port@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+
+						mixer0_out_tcon0: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&tcon0_in_mixer0>;
+						};
+
+						mixer0_out_tcon1: endpoint@1 {
+							reg = <1>;
+							remote-endpoint = <&tcon1_in_mixer0>;
+						};
+					};
+				};
+			};
+
+			mixer1: mixer@200000 {
+				compatible = "allwinner,sun50i-a64-de2-mixer-1";
+				reg = <0x200000 0x100000>;
+				clocks = <&display_clocks CLK_BUS_MIXER1>,
+					 <&display_clocks CLK_MIXER1>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_MIXER1>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					mixer1_out: port@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+
+						mixer1_out_tcon0: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&tcon0_in_mixer1>;
+						};
+
+						mixer1_out_tcon1: endpoint@1 {
+							reg = <1>;
+							remote-endpoint = <&tcon1_in_mixer1>;
+						};
+					};
+				};
+			};
+		};
+
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun50i-a64-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@18000 {
+				compatible = "mmio-sram";
+				reg = <0x00018000 0x28000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00018000 0x28000>;
+
+				de2_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-a64-sram-c";
+					reg = <0x0000 0x28000>;
+				};
+			};
+
+			sram_c1: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x40000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-a64-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x40000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun50i-a64-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			dma-channels = <8>;
+			dma-requests = <27>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun50i-a64-tcon-lcd",
+				     "allwinner,sun8i-a83t-tcon-lcd";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+
+					tcon0_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_dsi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun50i-a64-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON1>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon1>;
+					};
+
+					tcon1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-a64-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			compatible = "allwinner,sun50i-a64-sid";
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 0x8>;
+			};
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun50i-a64-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun50i-a64-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun50i-a64-usb-phy";
+			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun50i-a64-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun50i-a64-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			aif2_pins: aif2-pins {
+				pins = "PB4", "PB5", "PB6", "PB7";
+				function = "aif2";
+			};
+
+			/omit-if-no-ref/
+			aif3_pins: aif3-pins {
+				pins = "PG10", "PG11", "PG12", "PG13";
+				function = "aif3";
+			};
+
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
+				       "PE7", "PE8", "PE9", "PE10", "PE11";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH0", "PH1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
+			/omit-if-no-ref/
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9",
+				       "PD10", "PD11", "PD12", "PD13",
+				       "PD14", "PD15", "PD16", "PD17",
+				       "PD18", "PD19", "PD20", "PD21";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC5", "PC6", "PC8", "PC9",
+				       "PC10","PC11", "PC12", "PC13",
+				       "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_ds_pin: mmc2-ds-pin {
+				pins = "PC1";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			pwm_pin: pwm-pin {
+				pins = "PD22";
+				function = "pwm";
+			};
+
+			rmii_pins: rmii-pins {
+				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+				       "PD18", "PD19", "PD20", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			rgmii_pins: rgmii-pins {
+				pins = "PD8", "PD9", "PD10", "PD11", "PD12",
+				       "PD13", "PD15", "PD16", "PD17", "PD18",
+				       "PD19", "PD20", "PD21", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH8";
+				function = "spdif";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PD0", "PD1", "PD2", "PD3";
+				function = "spi1";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PD0", "PD1";
+				function = "uart3";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PD2", "PD3";
+				function = "uart4";
+			};
+
+			uart4_rts_cts_pins: uart4-rts-cts-pins {
+				pins = "PD4", "PD5";
+				function = "uart4";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun50i-a64-timer",
+				     "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun50i-a64-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-spdif",
+				     "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c21800 {
+			compatible = "allwinner,sun50i-a64-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c21800 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 3>, <&dma 3>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 4>, <&dma 4>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 27>, <&dma 27>;
+			status = "disabled";
+		};
+
+		dai: dai@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-codec-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22e00 {
+			#sound-dai-cells = <1>;
+			compatible = "allwinner,sun50i-a64-codec",
+				     "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x600>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+			status = "disabled";
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-a64-ths";
+			reg = <0x01c25000 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun50i-a64-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun50i-a64-mbus";
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
+		csi: csi@1cb0000 {
+			compatible = "allwinner,sun50i-a64-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun50i-a64-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>;
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun50i-a64-mipi-dphy",
+				     "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		deinterlace: deinterlace@1e00000 {
+			compatible = "allwinner,sun50i-a64-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01e00000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun50i-a64-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon1: endpoint {
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun50i-a64-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO0>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun50i-a64-rtc",
+				     "allwinner,sun8i-h3-rtc";
+			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun50i-a64-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun50i-a64-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		codec_analog: codec-analog@1f015c0 {
+			compatible = "allwinner,sun50i-a64-codec-analog";
+			reg = <0x01f015c0 0x4>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun50i-a64-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_ir: ir@1f02000 {
+			compatible = "allwinner,sun50i-a64-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01f02000 0x400>;
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_rx_pin>;
+			status = "disabled";
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01f03800 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun50i-a64-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pl89_pins: r-i2c-pl89-pins {
+				pins = "PL8", "PL9";
+				function = "s_i2c";
+			};
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				function = "s_cir_rx";
+			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu 6>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu 2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 0000000000..6406a29c85
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+#include <arm/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi>
+
+/ {
+	model = "Banana Pi BPI-M2-Plus v1.2 H5";
+	compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts
new file mode 100644
index 0000000000..cfb943e9ae
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/allwinner/sunxi-bananapi-m2-plus.dtsi>
+
+/ {
+	model = "Banana Pi BPI-M2-Plus H5";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
new file mode 100644
index 0000000000..1afad8b437
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1000000 1000000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1080000 1080000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1120000 1120000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1160000 1160000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1240000 1240000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1260000 1260000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-microvolt = <1300000 1300000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
new file mode 100644
index 0000000000..076a0b9831
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5-emlid-neutis-n5.dtsi"
+
+/ {
+	model = "Emlid Neutis N5 Developer board";
+	compatible = "emlid,neutis-n5-devboard",
+		     "emlid,neutis-n5",
+		     "allwinner,sun50i-h5";
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
new file mode 100644
index 0000000000..2f4b46746f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+#include <arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
new file mode 100644
index 0000000000..b79018c65c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 BayLibre, SAS
+// Author: Neil Armstrong <narmstrong@baylibre.com>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+#include <arm/allwinner/sunxi-libretech-all-h3-cc.dtsi>
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H5";
+	compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5";
+};
+
+&mmc2 {
+	mmc-ddr-3_3v;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
new file mode 100644
index 0000000000..dc657de2a1
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/allwinner/sunxi-libretech-all-h3-it.dtsi>
+
+/ {
+	model = "Libre Computer Board ALL-H3-IT H5";
+	compatible = "libretech,all-h3-it-h5", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
new file mode 100644
index 0000000000..6e30a564c8
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+#include "sun50i-h5-libretech-all-h3-cc.dts"
+
+/ {
+	model = "Libre Computer Board ALL-H5-CC H5";
+	compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+};
+
+&codec {
+	/* No line out; only onboard microphone */
+	allwinner,audio-routing =
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+};
+
+/* This board has external PHY */
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	/delete-property/ allwinner,leds-active-low;
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
new file mode 100644
index 0000000000..4c3921ac23
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Antony Antony <antony@phenome.org>
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Plus2";
+	compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
new file mode 100644
index 0000000000..05486cccee
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO 2";
+	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
new file mode 100644
index 0000000000..a3e040da38
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
+ *
+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
+ *   Copyright (C) 2017 Antony Antony <antony@phenome.org>
+ *   Copyright (C) 2016 ARM Ltd.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "FriendlyARM NanoPi R1S H5";
+	compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189etv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth_mac1: mac-address@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8189etv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
new file mode 100644
index 0000000000..ce3ae19e72
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi PC 2";
+	compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1100000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
new file mode 100644
index 0000000000..d7f8bad6bb
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-h5-orangepi-pc2.dts, which is:
+//   Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Prime";
+	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
new file mode 100644
index 0000000000..7ec5ac850a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Zero Plus";
+	compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5";
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aliases {
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
new file mode 100644
index 0000000000..22530ace12
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2";
+	compatible = "xunlong,orangepi-zero-plus2", "allwinner,sun50i-h5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
new file mode 100644
index 0000000000..d3caf27b6a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+#include <arm/allwinner/sunxi-h3-h5.dtsi>
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun50i-h5-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c1: sram@18000 {
+				compatible = "mmio-sram";
+				reg = <0x00018000 0x1c000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00018000 0x1c000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h5-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x1c000>;
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-h5-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun50i-h5-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		deinterlace: deinterlace@1e00000 {
+			compatible = "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01e00000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		mali: gpu@1e80000 {
+			compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
+			reg = <0x01e80000 0x30000>;
+			/*
+			 * While the datasheet lists an interrupt for the
+			 * PMU, the actual silicon does not have the PMU
+			 * block. Reads all return zero, and writes are
+			 * ignored.
+			 */
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pp2",
+					  "ppmmu2",
+					  "pp3",
+					  "ppmmu3";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-h5-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun50i-h5-ccu";
+};
+
+&display_clocks {
+	compatible = "allwinner,sun50i-h5-de2-clk";
+};
+
+&mbus {
+	compatible = "allwinner,sun50i-h5-mbus";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+	clock-names = "ahb", "mmc";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+	clock-names = "ahb", "mmc";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun50i-h5-emmc",
+		     "allwinner,sun50i-a64-emmc";
+	clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+	clock-names = "ahb", "mmc";
+};
+
+&pio {
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	compatible = "allwinner,sun50i-h5-pinctrl";
+};
+
+&rtc {
+	compatible = "allwinner,sun50i-h5-rtc";
+};
+
+&sid {
+	compatible = "allwinner,sun50i-h5-sid";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
new file mode 100644
index 0000000000..9ec49ac2f6
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+#include "sun50i-h6-gpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Beelink GS1";
+	compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "beelink:white:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_aldo2>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	non-removable;
+	cap-mmc-hw-reset;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp805: pmic@745 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+				regulator-enable-ramp-delay = <100000>;
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc25-dram";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
new file mode 100644
index 0000000000..0baf0f8e4d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+// Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-h6-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp-480000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <480000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp-720000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <720000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp-816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp-888000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <888000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp-1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <940000 940000 1200000>;
+			opp-microvolt-speed1 = <880000 880000 1200000>;
+			opp-microvolt-speed2 = <880000 880000 1200000>;
+		};
+
+		opp-1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1000000 1000000 1200000>;
+			opp-microvolt-speed1 = <940000 940000 1200000>;
+			opp-microvolt-speed2 = <940000 940000 1200000>;
+		};
+
+		opp-1488000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1488000000>;
+
+			opp-microvolt-speed0 = <1060000 1060000 1200000>;
+			opp-microvolt-speed1 = <1000000 1000000 1200000>;
+			opp-microvolt-speed2 = <1000000 1000000 1200000>;
+		};
+
+		opp-1608000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1608000000>;
+
+			opp-microvolt-speed0 = <1090000 1090000 1200000>;
+			opp-microvolt-speed1 = <1030000 1030000 1200000>;
+			opp-microvolt-speed2 = <1030000 1030000 1200000>;
+		};
+
+		opp-1704000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1704000000>;
+
+			opp-microvolt-speed0 = <1120000 1120000 1200000>;
+			opp-microvolt-speed1 = <1060000 1060000 1200000>;
+			opp-microvolt-speed2 = <1060000 1060000 1200000>;
+		};
+
+		opp-1800000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1800000000>;
+
+			opp-microvolt-speed0 = <1160000 1160000 1200000>;
+			opp-microvolt-speed1 = <1100000 1100000 1200000>;
+			opp-microvolt-speed2 = <1100000 1100000 1200000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi
new file mode 100644
index 0000000000..b48049c4fc
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Clément Péron <peron.clem@gmail.com>
+
+/ {
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-216000000 {
+			opp-hz = /bits/ 64 <216000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-264000000 {
+			opp-hz = /bits/ 64 <264000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-336000000 {
+			opp-hz = /bits/ 64 <336000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-360000000 {
+			opp-hz = /bits/ 64 <360000000>;
+			opp-microvolt = <820000 820000 1200000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <830000 830000 1200000>;
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <840000 840000 1200000>;
+		};
+
+		opp-420000000 {
+			opp-hz = /bits/ 64 <420000000>;
+			opp-microvolt = <850000 850000 1200000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+			opp-microvolt = <860000 860000 1200000>;
+		};
+
+		opp-456000000 {
+			opp-hz = /bits/ 64 <456000000>;
+			opp-microvolt = <870000 870000 1200000>;
+		};
+
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <890000 890000 1200000>;
+		};
+
+		opp-540000000 {
+			opp-hz = /bits/ 64 <540000000>;
+			opp-microvolt = <910000 910000 1200000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-microvolt = <930000 930000 1200000>;
+		};
+
+		opp-624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <950000 950000 1200000>;
+		};
+
+		opp-756000000 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-microvolt = <1040000 1040000 1200000>;
+		};
+	};
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
new file mode 100644
index 0000000000..6fc65e8db2
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi 3";
+	compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc33_wifi: vcc33-wifi {
+		/* Always on 3.3V regulator for WiFi and BT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcm: sdio-wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_vcc_wifi_io>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp805: pmic@745 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led-ir";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-audio-tv-ephy-mac";
+			};
+
+			/* ALDO3 is shorted to CLDO1 */
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18-dram-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-pc";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* There's the BT part of the AP6256 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb2otg {
+	/*
+	 * This board doesn't have a controllable VBUS even though it
+	 * does have an ID pin. Using it as anything but a USB host is
+	 * unsafe.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
new file mode 100644
index 0000000000..fb31dcb1cb
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
+
+#include "sun50i-h6-orangepi.dtsi"
+
+/ {
+	model = "OrangePi Lite2";
+	compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6";
+
+	aliases {
+		serial1 = &uart1; /* BT-UART */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_cldo2>;
+	vqmmc-supply = <&reg_bldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcm: sdio-wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>;	/* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&reg_cldo2 {
+	/*
+	 * This regulator is connected with CLDO3.
+	 * Before the kernel can support synchronized
+	 * enable of coupled regulators, keep them
+	 * both always on as a ugly hack.
+	 */
+	regulator-always-on;
+};
+
+&reg_cldo3 {
+	/*
+	 * This regulator is connected with CLDO2.
+	 * See the comments for CLDO2.
+	 */
+	regulator-always-on;
+};
+
+/* There's the BT part of the AP6255 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
new file mode 100644
index 0000000000..29a081e72a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+#include "sun50i-h6-orangepi.dtsi"
+
+/ {
+	model = "OrangePi One Plus";
+	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+		vin-supply = <&reg_aldo2>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <200>;
+	allwinner,tx-delay-ps = <200>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
new file mode 100644
index 0000000000..92745128fc
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi One Plus";
+	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp805: pmic@745 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc25-dram";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	/*
+	 * OrangePi Lite 2 and One Plus, where this DT is used, don't
+	 * have a controllable VBUS even though they do have an ID pin.
+	 * Using it as anything but a USB host is unsafe.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
new file mode 100644
index 0000000000..b710f1a0f5
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+	model = "Pine H64 model B";
+	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
+
+	/delete-node/ reg_gmac_3v3;
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&hdmi_connector {
+	/delete-property/ ddc-en-gpios;
+};
+
+&emac {
+	phy-supply = <&reg_aldo2>;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
new file mode 100644
index 0000000000..1ffd68f43f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Pine H64 model A";
+	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	hdmi_connector: connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "pine-h64:green:heartbeat";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		};
+
+		led-1 {
+			label = "pine-h64:white:link";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
+		};
+
+		led-2 {
+			label = "pine-h64:blue:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <200>;
+	allwinner,tx-delay-ps = <200>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+				regulator-enable-ramp-delay = <100000>;
+			};
+
+			reg_aldo3: aldo3 {
+				/* This regulator is connected with CLDO1 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				/* This regulator is connected with ALDO3 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-2";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+	};
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+/*
+ * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
+ * flash and eMMC at the same time, as one of them would fail probing.
+ * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
+ * fix this up in no eMMC is connected.
+ */
+&spi0 {
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+
+	flash@0 {
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_vbus-supply = <&reg_usb_vbus>;
+	usb3_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts
new file mode 100644
index 0000000000..08d84160d8
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6-tanix.dtsi"
+
+/ {
+	model = "Tanix TX6 mini";
+	compatible = "oranth,tanix-tx6-mini", "allwinner,sun50i-h6";
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
new file mode 100644
index 0000000000..9a38ff9b3f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6-tanix.dtsi"
+
+/ {
+	model = "Tanix TX6";
+	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-tanix-tx5max";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
new file mode 100644
index 0000000000..4903d63581
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	/* used for FD650 LED display driver */
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
+		scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
+		i2c-gpio,delay-us = <5>;
+	};
+
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-gpu";
+		regulator-min-microvolt = <1135000>;
+		regulator-max-microvolt = <1135000>;
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu_gpu>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_vdd_cpu_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_vcc1v8>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc1v8>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
new file mode 100644
index 0000000000..ca1d287a0a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -0,0 +1,1128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun50i-h6-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	osc24M: osc24M_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		bus@1000000 {
+			compatible = "allwinner,sun50i-h6-de3",
+				     "allwinner,sun50i-a64-de2";
+			reg = <0x1000000 0x400000>;
+			allwinner,sram = <&de2_sram 1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1000000 0x400000>;
+
+			display_clocks: clock@0 {
+				compatible = "allwinner,sun50i-h6-de3-clk";
+				reg = <0x0 0x10000>;
+				clocks = <&ccu CLK_BUS_DE>,
+					 <&ccu CLK_DE>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&ccu RST_BUS_DE>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			mixer0: mixer@100000 {
+				compatible = "allwinner,sun50i-h6-de3-mixer-0";
+				reg = <0x100000 0x100000>;
+				clocks = <&display_clocks CLK_BUS_MIXER0>,
+					 <&display_clocks CLK_MIXER0>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_MIXER0>;
+				iommus = <&iommu 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					mixer0_out: port@1 {
+						reg = <1>;
+
+						mixer0_out_tcon_top_mixer0: endpoint {
+							remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+						};
+					};
+				};
+			};
+		};
+
+		video-codec-g2@1c00000 {
+			compatible = "allwinner,sun50i-h6-vpu-g2";
+			reg = <0x01c00000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_VP9>;
+			iommus = <&iommu 5>;
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-h6-video-engine";
+			reg = <0x01c0e000 0x2000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_MBUS_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+			iommus = <&iommu 3>;
+		};
+
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun50i-h6-mali",
+				     "arm,mali-t720";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
+			status = "disabled";
+		};
+
+		crypto: crypto@1904000 {
+			compatible = "allwinner,sun50i-h6-crypto";
+			reg = <0x01904000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-h6-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@28000 {
+				compatible = "mmio-sram";
+				reg = <0x00028000 0x1e000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00028000 0x1e000>;
+
+				de2_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h6-sram-c",
+						     "allwinner,sun50i-a64-sram-c";
+					reg = <0x0000 0x1e000>;
+				};
+			};
+
+			sram_c1: sram@1a00000 {
+				compatible = "mmio-sram";
+				reg = <0x01a00000 0x200000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01a00000 0x200000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h6-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x200000>;
+				};
+			};
+		};
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-h6-ccu";
+			reg = <0x03001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-h6-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <46>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		msgbox: mailbox@3003000 {
+			compatible = "allwinner,sun50i-h6-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x03003000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun50i-h6-sid";
+			reg = <0x03006000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x4>;
+			};
+		};
+
+		timer@3009000 {
+			compatible = "allwinner,sun50i-h6-timer",
+				     "allwinner,sun8i-a23-timer";
+			reg = <0x03009000 0xa0>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		watchdog: watchdog@30090a0 {
+			compatible = "allwinner,sun50i-h6-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+			/* Broken on some H6 boards */
+			status = "disabled";
+		};
+
+		pwm: pwm@300a000 {
+			compatible = "allwinner,sun50i-h6-pwm";
+			reg = <0x0300a000 0x400>;
+			clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+			clock-names = "mod", "bus";
+			resets = <&ccu RST_BUS_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-h6-pinctrl";
+			reg = <0x0300b000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			ext_rgmii_pins: rgmii-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD11", "PD12", "PD13", "PD19", "PD20";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			hdmi_pins: hdmi-pins {
+				pins = "PH8", "PH9", "PH10";
+				function = "hdmi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PD25", "PD26";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH5", "PH6";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PD23", "PD24";
+				function = "i2c2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC1", "PC4", "PC5", "PC6",
+				       "PC7", "PC8", "PC9", "PC10",
+				       "PC11", "PC12", "PC13", "PC14";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			/* pin shared with MMC2-CMD (eMMC) */
+			/omit-if-no-ref/
+			spi0_cs_pin: spi0-cs-pin {
+				pins = "PC5";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PH4", "PH5", "PH6";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs_pin: spi1-cs-pin {
+				pins = "PH3";
+				function = "spi1";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH7";
+				function = "spdif";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x03021000 0x1000>,
+			      <0x03022000 0x2000>,
+			      <0x03024000 0x2000>,
+			      <0x03026000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		iommu: iommu@30f0000 {
+			compatible = "allwinner,sun50i-h6-iommu";
+			reg = <0x030f0000 0x10000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_IOMMU>;
+			resets = <&ccu RST_BUS_IOMMU>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-h6-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@5020000 {
+			compatible = "allwinner,sun50i-h6-emac",
+				     "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x05020000 0x10000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		i2s1: i2s@5091000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-i2s";
+			reg = <0x05091000 0x1000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spdif: spdif@5093000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		usb2otg: usb@5100000 {
+			compatible = "allwinner,sun50i-h6-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usb2phy 0>;
+			phy-names = "usb";
+			extcon = <&usb2phy 0>;
+			status = "disabled";
+		};
+
+		usb2phy: phy@5100400 {
+			compatible = "allwinner,sun50i-h6-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x4>,
+			      <0x05311800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usb2phy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usb2phy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		dwc3: usb@5200000 {
+			compatible = "snps,dwc3";
+			reg = <0x05200000 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_XHCI>,
+				 <&ccu CLK_BUS_XHCI>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "ref", "bus_early", "suspend";
+			resets = <&ccu RST_BUS_XHCI>;
+			/*
+			 * The datasheet of the chip doesn't declare the
+			 * peripheral function, and there's no boards known
+			 * to have a USB Type-B port routed to the port.
+			 * In addition, no one has tested the peripheral
+			 * function yet.
+			 * So set the dr_mode to "host" in the DTSI file.
+			 */
+			dr_mode = "host";
+			phys = <&usb3phy>;
+			phy-names = "usb3-phy";
+			status = "disabled";
+		};
+
+		usb3phy: phy@5210000 {
+			compatible = "allwinner,sun50i-h6-usb3-phy";
+			reg = <0x5210000 0x10000>;
+			clocks = <&ccu CLK_USB_PHY1>;
+			resets = <&ccu RST_USB_PHY1>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usb2phy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usb2phy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		hdmi: hdmi@6000000 {
+			compatible = "allwinner,sun50i-h6-dw-hdmi";
+			reg = <0x06000000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
+				 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
+			clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
+				      "hdcp-bus";
+			resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
+			reset-names = "ctrl", "hdcp";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pins>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@6010000 {
+			compatible = "allwinner,sun50i-h6-hdmi-phy";
+			reg = <0x06010000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_HDMI>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		tcon_top: tcon-top@6510000 {
+			compatible = "allwinner,sun50i-h6-tcon-top";
+			reg = <0x06510000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>;
+			clock-names = "bus",
+				      "tcon-tv0";
+			clock-output-names = "tcon-top-tv0";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_tv: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv: lcd-controller@6515000 {
+			compatible = "allwinner,sun50i-h6-tcon-tv",
+				     "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x06515000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>,
+				 <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb",
+				      "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv_in: port@0 {
+					reg = <0>;
+
+					tcon_tv_in_tcon_top_mixer0: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
+					};
+				};
+
+				tcon_tv_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@7000000 {
+			compatible = "allwinner,sun50i-h6-rtc";
+			reg = <0x07000000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			#clock-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-h6-r-ccu";
+			reg = <0x07010000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_watchdog: watchdog@7020400 {
+			compatible = "allwinner,sun50i-h6-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x07020400 0x20>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		r_intc: interrupt-controller@7021000 {
+			compatible = "allwinner,sun50i-h6-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x07021000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-h6-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL9";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		r_ir: ir@7040000 {
+				compatible = "allwinner,sun50i-h6-ir",
+					     "allwinner,sun6i-a31-ir";
+				reg = <0x07040000 0x400>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&r_ccu CLK_R_APB1_IR>,
+					 <&r_ccu CLK_IR>;
+				clock-names = "apb", "ir";
+				resets = <&r_ccu RST_R_APB1_IR>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&r_ir_rx_pin>;
+				status = "disabled";
+		};
+
+		r_i2c: i2c@7081400 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			resets = <&r_ccu RST_R_APB2_I2C>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_rsb: rsb@7083000 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x07083000 0x400>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_R_APB2_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-h6-ths";
+			reg = <0x05070400 0x100>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <2000>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: gpu-alert-1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert2: gpu-alert-2 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				// Forbid the GPU to go over 756MHz
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu 1 THERMAL_NO_LIMIT>;
+				};
+
+				// Forbid the GPU to go over 624MHz
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
+				};
+
+				// Forbid the GPU to go over 576MHz
+				map2 {
+					trip = <&gpu_alert2>;
+					cooling-device = <&gpu 3 THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
new file mode 100644
index 0000000000..fc7315b944
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ *
+ * DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3.
+ * Excludes PMIC nodes and properties, since they are different between the two.
+ */
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on headers only. */
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
new file mode 100644
index 0000000000..b5d713926a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-orangepi-zero.dtsi"
+
+/ {
+	model = "OrangePi Zero2";
+	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
+};
+
+&emac0 {
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_dcdce>;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdce>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp305: pmic@745 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x745>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-sys";
+			};
+
+			reg_aldo2: aldo2 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext";
+			};
+
+			reg_aldo3: aldo3 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext2";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* reserved */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-mmc";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_aldo1>;
+	vcc-pi-supply = <&reg_aldo1>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
new file mode 100644
index 0000000000..959b6fd184
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "X96 Mate";
+	compatible = "hechuang,x96-mate", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdce>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdce>;
+	vqmmc-supply = <&reg_bldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp305: pmic@745 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x745>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-sys";
+			};
+
+			/* Enabled by the Android BSP */
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext";
+				status = "disabled";
+			};
+
+			/* Enabled by the Android BSP */
+			reg_aldo3: aldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext2";
+				status = "disabled";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Enabled by the Android BSP */
+			reg_bldo2: bldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8-2";
+				status = "disabled";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc2v5";
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-mmc";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
new file mode 100644
index 0000000000..74aed0d232
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -0,0 +1,751 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Arm Ltd.
+// based on the H6 dtsi, which is:
+//   Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h616-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/reset/sun50i-h616-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 256 KiB reserved for Trusted Firmware-A (BL31).
+		 * This is added by BL31 itself, but some bootloaders fail
+		 * to propagate this into the DTB handed to kernels.
+		 */
+		secmon@40000000 {
+			reg = <0x0 0x40000000 0x0 0x40000>;
+			no-map;
+		};
+	};
+
+	osc24M: osc24M-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-h616-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@28000 {
+				compatible = "mmio-sram";
+				reg = <0x00028000 0x30000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00028000 0x30000>;
+			};
+		};
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-h616-ccu";
+			reg = <0x03001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		watchdog: watchdog@30090a0 {
+			compatible = "allwinner,sun50i-h616-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-h616-pinctrl";
+			reg = <0x0300b000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			ext_rgmii_pins: rgmii-pins {
+				pins = "PI0", "PI1", "PI2", "PI3", "PI4",
+				       "PI5", "PI7", "PI8", "PI9", "PI10",
+				       "PI11", "PI12", "PI13", "PI14", "PI15",
+				       "PI16";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PI6", "PI7";
+				function = "i2c0";
+			};
+
+			i2c3_ph_pins: i2c3-ph-pins {
+				pins = "PH4", "PH5";
+				function = "i2c3";
+			};
+
+			ir_rx_pin: ir-rx-pin {
+				pins = "PH10";
+				function = "ir_rx";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1", "PC5", "PC6",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC13", "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC4";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pin: spi0-cs0-pin {
+				pins = "PC3";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PH6", "PH7", "PH8";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pin: spi1-cs0-pin {
+				pins = "PH5";
+				function = "spi1";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x03021000 0x1000>,
+			      <0x03022000 0x2000>,
+			      <0x03024000 0x2000>,
+			      <0x03026000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-h616-mmc",
+				     "allwinner,sun50i-a100-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-h616-mmc",
+				     "allwinner,sun50i-a100-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-h616-emmc",
+				     "allwinner,sun50i-a100-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@5001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@5001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@5002c00 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002c00 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@5003000 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05003000 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h616-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h616-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac0: ethernet@5020000 {
+			compatible = "allwinner,sun50i-h616-emac0",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x05020000 0x10000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC0>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC0>;
+			reset-names = "stmmaceth";
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		usbotg: usb@5100000 {
+			compatible = "allwinner,sun50i-h616-musb",
+				     "allwinner,sun8i-h3-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-h616-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x14>,
+			      <0x05200800 0x14>,
+			      <0x05310800 0x14>,
+			      <0x05311800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>,
+				 <&ccu CLK_BUS_EHCI2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy",
+				      "pmu2_clk";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@5310000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05310000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_BUS_EHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>,
+				 <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@5310400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05310400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		rtc: rtc@7000000 {
+			compatible = "allwinner,sun50i-h616-rtc";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>,
+				 <&ccu CLK_PLL_SYSTEM_32K>;
+			clock-names = "bus", "hosc",
+				      "pll-32k";
+			#clock-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-h616-r-ccu";
+			reg = <0x07010000 0x210>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-h616-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		ir: ir@7040000 {
+			compatible = "allwinner,sun50i-h616-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x07040000 0x400>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1_IR>,
+				 <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_R_APB1_IR>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir_rx_pin>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@7081400 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			resets = <&r_ccu RST_R_APB2_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_rsb: rsb@7083000 {
+			compatible = "allwinner,sun50i-h616-rsb",
+				     "allwinner,sun8i-a23-rsb";
+			reg = <0x07083000 0x400>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_R_APB2_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
new file mode 100644
index 0000000000..b3b1b86921
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-orangepi-zero.dtsi"
+
+/ {
+	model = "OrangePi Zero3";
+	compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
+};
+
+&emac0 {
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii-rxid";
+	phy-supply = <&reg_dldo1>;
+};
+
+&ext_rgmii_phy {
+	motorcomm,clk-out-frequency-hz = <125000000>;
+};
+
+&mmc0 {
+	/*
+	 * The schematic shows the card detect pin wired up to PF6, via an
+	 * inverter, but it just doesn't work.
+	 */
+	broken-cd;
+	vmmc-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
new file mode 100644
index 0000000000..1bf0c472f6
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \
+				socfpga_stratix10_socdk_nand.dtb \
+				socfpga_stratix10_swvp.dtb
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
new file mode 100644
index 0000000000..439497ab96
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/stratix10-clock.h>
+
+/ {
+	compatible = "altr,socfpga-stratix10";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		service_reserved: svcbuffer@0 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x0 0x0 0x1000000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 170 4>,
+			     <0 171 4>,
+			     <0 172 4>,
+			     <0 173 4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+		interrupt-parent = <&intc>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* Local timer */
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		interrupt-parent = <&intc>;
+	};
+
+	intc: interrupt-controller@fffc1000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0xfffc1000 0x0 0x1000>,
+		      <0x0 0xfffc2000 0x0 0x2000>,
+		      <0x0 0xfffc4000 0x0 0x2000>,
+		      <0x0 0xfffc6000 0x0 0x2000>;
+	};
+
+	clocks {
+		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		cb_intosc_ls_clk: cb-intosc-ls-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		f2s_free_clk: f2s-free-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		osc1: osc1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		qspi_clk: qspi-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges = <0 0 0 0xffffffff>;
+
+		base_fpga_region {
+			#address-cells = <0x2>;
+			#size-cells = <0x2>;
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+
+		clkmgr: clock-controller@ffd10000 {
+			compatible = "intel,stratix10-clkmgr";
+			reg = <0xffd10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 90 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr STRATIX10_EMAC0_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 1>;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff802000 0x2000>;
+			interrupts = <0 91 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr STRATIX10_EMAC1_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 2>;
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 92 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr STRATIX10_EMAC2_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 3>;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc03200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03200 0x100>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 110 4>;
+			};
+		};
+
+		gpio1: gpio@ffc03300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03300 0x100>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 111 4>;
+			};
+		};
+
+		i2c0: i2c@ffc02800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02800 0x100>;
+			interrupts = <0 103 4>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02900 0x100>;
+			interrupts = <0 104 4>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02a00 0x100>;
+			interrupts = <0 105 4>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02b00 0x100>;
+			interrupts = <0 106 4>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02c00 0x100>;
+			interrupts = <0 107 4>;
+			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		mmc: mmc@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 96 4>;
+			fifo-depth = <0x400>;
+			resets = <&rst SDMMC_RESET>;
+			reset-names = "reset";
+			clocks = <&clkmgr STRATIX10_L4_MP_CLK>,
+				 <&clkmgr STRATIX10_SDMMC_CLK>;
+			clock-names = "biu", "ciu";
+			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
+			status = "disabled";
+		};
+
+		nand: nand-controller@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x10000>,
+			      <0xffb80000 0x1000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 97 4>;
+			clocks = <&clkmgr STRATIX10_NAND_CLK>,
+				 <&clkmgr STRATIX10_NAND_X_CLK>,
+				 <&clkmgr STRATIX10_NAND_ECC_CLK>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xffe00000 0x100000>;
+		};
+
+		pdma: dma-controller@ffda0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xffda0000 0x1000>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>,
+				     <0 85 4>,
+				     <0 86 4>,
+				     <0 87 4>,
+				     <0 88 4>,
+				     <0 89 4>;
+			#dma-cells = <1>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			clock-names = "apb_pclk";
+			resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+			reset-names = "dma", "dma-ocp";
+		};
+
+		pinctrl0: pinctrl@ffd13000 {
+			compatible = "pinctrl-single";
+			reg = <0xffd13000 0xA0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+		};
+
+		pinctrl1: pinctrl@ffd13100 {
+			compatible = "pinctrl-single";
+			reg = <0xffd13100 0x20>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+		};
+
+		rst: rstmgr@ffd11000 {
+			#reset-cells = <1>;
+			compatible = "altr,stratix10-rst-mgr";
+			reg = <0xffd11000 0x1000>;
+		};
+
+		smmu: iommu@fa000000 {
+			compatible = "arm,mmu-500", "arm,smmu-v2";
+			reg = <0xfa000000 0x40000>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			clock-names = "iommu";
+			interrupt-parent = <&intc>;
+			interrupts = <0 128 4>,	/* Global Secure Fault */
+				<0 129 4>, /* Global Non-secure Fault */
+				/* Non-secure Context Interrupts (32) */
+				<0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+				<0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+				<0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+				<0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+				<0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+				<0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+				<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+				<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+			stream-match-mask = <0x7ff0>;
+			status = "disabled";
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x1000>;
+			interrupts = <0 99 4>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x1000>;
+			interrupts = <0 100 4>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd12000 {
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
+			reg = <0xffd12000 0x228>;
+		};
+
+		timer0: timer0@ffc03000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 113 4>;
+			reg = <0xffc03000 0x100>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1@ffc03100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 114 4>;
+			reg = <0xffc03100 0x100>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 4>;
+			reg = <0xffd00000 0x100>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 4>;
+			reg = <0xffd00100 0x100>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		uart0: serial@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 108 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART0_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		uart1: serial@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 109 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART1_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0x40000>;
+			interrupts = <0 93 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			clock-names = "otg";
+			iommus = <&smmu 6>;
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0x40000>;
+			interrupts = <0 94 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			iommus = <&smmu 7>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 117 4>;
+			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 118 4>;
+			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@ffd00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00400 0x100>;
+			interrupts = <0 125 4>;
+			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@ffd00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00500 0x100>;
+			interrupts = <0 126 4>;
+			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		sdr: sdr@f8011100 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xf8011100 0xc0>;
+		};
+
+		eccmgr {
+			compatible = "altr,socfpga-s10-ecc-manager",
+				     "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 15 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-s10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <16 4>;
+			};
+
+			ocram-ecc@ff8cc000 {
+				compatible = "altr,socfpga-s10-ocram-ecc",
+					     "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8cc000 0x100>;
+				altr,ecc-parent = <&ocram>;
+				interrupts = <1 4>;
+			};
+
+			usb0-ecc@ff8c4000 {
+				compatible = "altr,socfpga-s10-usb-ecc",
+					     "altr,socfpga-usb-ecc";
+				reg = <0xff8c4000 0x100>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 4>;
+			};
+
+			emac0-rx-ecc@ff8c0000 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0000 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 4>;
+			};
+
+			emac0-tx-ecc@ff8c0400 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0400 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 4>;
+			};
+
+		};
+
+		qspi: spi@ff8d2000 {
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff8d2000 0x100>,
+			      <0xff900000 0x100000>;
+			interrupts = <0 3 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+
+			status = "disabled";
+		};
+
+		firmware {
+			svc {
+				compatible = "intel,stratix10-svc";
+				method = "smc";
+				memory-region = <&service_reserved>;
+
+				fpga_mgr: fpga-mgr {
+					compatible = "intel,stratix10-soc-fpga-mgr";
+				};
+			};
+		};
+	};
+
+	usbphy0: usbphy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
new file mode 100644
index 0000000000..468fcc7da0
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK";
+	compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	ref_033v: regulator-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		eccmgr {
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	i2c1_pmx_func: i2c1-pmx-func {
+		pinctrl-single,pins = <
+			0x78   0x4   /* I2C1_SDA (IO6-B) PIN30SEL) */
+			0x7c   0x4   /* I2C1_SCL (IO7-B) PIN31SEL */
+		>;
+	};
+
+	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio {
+		pinctrl-single,pins = <
+			0x78   0x8   /* I2C1_SDA (IO6-B) PIN30SEL) */
+			0x7c   0x8   /* I2C1_SCL (IO7-B) PIN31SEL */
+		>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
+
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pmx_func>;
+	pinctrl-1 = <&i2c1_pmx_func_gpio>;
+
+	scl-gpios = <&portb 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&portb 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x04200000>;
+			};
+
+			root: partition@4200000 {
+				label = "Root Filesystem - UBIFS";
+				reg = <0x04200000 0x0BE00000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
new file mode 100644
index 0000000000..532164a635
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK";
+	compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	ref_033v: regulator-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		eccmgr {
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+
+		partition@200000 {
+			label = "root";
+			reg = <0x200000 0x3fe00000>;
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x03FE0000>;
+			};
+
+			qspi_rootfs: partition@3fe0000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x03FE0000 0x0C020000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
new file mode 100644
index 0000000000..ff413f8e3b
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022, Intel Corporation
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SOCFPGA Stratix 10 SWVP";
+	compatible = "altr,socfpga-stratix10-swvp", "altr,socfpga-stratix10";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+
+		timer0 = &timer0;
+		timer1 = &timer1;
+		timer2 = &timer2;
+		timer3 = &timer3;
+
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		linux,initrd-start = <0x10000000>;
+		linux,initrd-end = <0x125c8324>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&cpu0 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu2 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu3 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>;
+	snps,max-mtu = <0x0>;
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>;
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>;
+};
+
+&mmc {
+	status = "okay";
+	altr,dw-mshc-ciu-div = <0x3>;
+	altr,dw-mshc-sdr-timing = <0x0 0x3>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
+	status = "okay";
+};
+
+&usb1 {
+	clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
+	status = "okay";
+};
+
+&rst {
+	altr,modrst-offset = <0x20>;
+};
+
+&sysmgr {
+	reg = <0xffd12000 0x1000>;
+	interrupts = <0x0 0x10 0x4>;
+	cpu1-start-addr = <0xffd06230>;
+};
diff --git a/arch/arm64/boot/dts/amazon/Makefile b/arch/arm64/boot/dts/amazon/Makefile
new file mode 100644
index 0000000000..ba9e115449
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v2-evp.dtb
+dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v3-evp.dtb
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts
new file mode 100644
index 0000000000..a079d7b306
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "alpine-v2.dtsi"
+
+/ {
+	model = "Annapurna Labs Alpine v2 EVP";
+	compatible = "al,alpine-v2-evp", "al,alpine-v2";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
new file mode 100644
index 0000000000..dccbba6e7f
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -0,0 +1,232 @@
+/*
+ * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Annapurna Labs Alpine v2";
+	compatible = "al,alpine-v2";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	sbclk: sbclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		pmu {
+			compatible = "arm,armv8-pmuv3";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@f0200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0xf0200000 0x0 0x10000>,	/* GIC Dist */
+			      <0x0 0xf0280000 0x0 0x200000>,	/* GICR */
+			      <0x0 0xf0100000 0x0 0x2000>,	/* GICC */
+			      <0x0 0xf0110000 0x0 0x2000>,	/* GICV */
+			      <0x0 0xf0120000 0x0 0x2000>;	/* GICH */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		pci@fbc00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbc00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* add legacy interrupts for SATA only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 53 4>,
+					<0x4800 0 0 1 &gic 0 54 4>;
+			/* 32 bit non prefetchable memory space */
+			ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <160>;
+			al,msi-num-spis = <160>;
+		};
+
+		io-fabric {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xfc000000 0x2000000>;
+
+			uart0: serial@1883000 {
+				compatible = "ns16550a";
+				reg = <0x1883000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart1: serial@1884000 {
+				compatible = "ns16550a";
+				reg = <0x1884000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart2: serial@1885000 {
+				compatible = "ns16550a";
+				reg = <0x1885000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart3: serial@1886000 {
+				compatible = "ns16550a";
+				reg = <0x1886000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			timer0: timer@1890000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1890000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+			};
+
+			timer1: timer@1891000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1891000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+
+			timer2: timer@1892000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1892000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+
+			timer3: timer@1893000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1893000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts
new file mode 100644
index 0000000000..48078f5ea5
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include "alpine-v3.dtsi"
+
+/ {
+	model = "Amazon's Annapurna Labs Alpine v3 Evaluation Platform (EVP)";
+	compatible = "amazon,al-alpine-v3-evp", "amazon,al-alpine-v3";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
new file mode 100644
index 0000000000..39481d7fd7
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Amazon.com, Inc. or its affiliates. All Rights Reserved
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Amazon's Annapurna Labs Alpine v3";
+	compatible = "amazon,al-alpine-v3";
+
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x201>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x202>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x203>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x300>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x301>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x302>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x303>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: cache@0 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: cache@100 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster2_l2: cache@200 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster3_l2: cache@300 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@0 {
+			reg = <0x0 0x0 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f0000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0xf0800000 0 0x10000>,	/* GICD */
+			      <0x0 0xf0a00000 0 0x200000>,	/* GICR */
+			      <0x0 0xf0000000 0 0x2000>,	/* GICC */
+			      <0x0 0xf0010000 0 0x1000>,	/* GICH */
+			      <0x0 0xf0020000 0 0x2000>;	/* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@fbd00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbd00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* 8 x legacy interrupts for SATA only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+					<0x4800 0 0 1 &gic 0 58 IRQ_TYPE_LEVEL_HIGH>,
+					<0x5000 0 0 1 &gic 0 59 IRQ_TYPE_LEVEL_HIGH>,
+					<0x5800 0 0 1 &gic 0 60 IRQ_TYPE_LEVEL_HIGH>,
+					<0x6000 0 0 1 &gic 0 61 IRQ_TYPE_LEVEL_HIGH>,
+					<0x6800 0 0 1 &gic 0 62 IRQ_TYPE_LEVEL_HIGH>,
+					<0x7000 0 0 1 &gic 0 63 IRQ_TYPE_LEVEL_HIGH>,
+					<0x7800 0 0 1 &gic 0 64 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <336>;
+			al,msi-num-spis = <959>;
+			interrupt-parent = <&gic>;
+		};
+
+		io-fabric {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xfc000000 0x2000000>;
+
+			uart0: serial@1883000 {
+				compatible = "ns16550a";
+				reg = <0x1883000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart1: serial@1884000 {
+				compatible = "ns16550a";
+				reg = <0x1884000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart2: serial@1885000 {
+				compatible = "ns16550a";
+				reg = <0x1885000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart3: serial@1886000 {
+				compatible = "ns16550a";
+				reg = <0x1886000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
new file mode 100644
index 0000000000..68103a8b0e
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 0000000000..21149acb6b
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+/include/ "amd-seattle-cpus.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+};
+
+&ccp0 {
+	status = "okay";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 0000000000..99205ae1b4
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+/include/ "amd-seattle-cpus.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+};
+
+&ccp0 {
+	status = "okay";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "okay";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
new file mode 100644
index 0000000000..2dd2c28171
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle Clocks
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+	adl3clk_100mhz: clk100mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "adl3clk_100mhz";
+	};
+
+	ccpclk_375mhz: clk375mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <375000000>;
+		clock-output-names = "ccpclk_375mhz";
+	};
+
+	sataclk_333mhz: clk333mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <333000000>;
+		clock-output-names = "sataclk_333mhz";
+	};
+
+	pcieclk_500mhz: clk500mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+		clock-output-names = "pcieclk_500mhz";
+	};
+
+	dmaclk_500mhz: clk500mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+		clock-output-names = "dmaclk_500mhz";
+	};
+
+	miscclk_250mhz: clk250mhz_4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "miscclk_250mhz";
+	};
+
+	uartspiclk_100mhz: clk100mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "uartspiclk_100mhz";
+	};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-cpus.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-cpus.dtsi
new file mode 100644
index 0000000000..93688a0b68
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-cpus.dtsi
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU6>;
+				};
+				core1 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_0>;
+
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x100>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_1>;
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x101>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_1>;
+		};
+
+		CPU4: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x200>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_2>;
+		};
+
+		CPU5: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x201>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_2>;
+		};
+
+		CPU6: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x300>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_3>;
+		};
+
+		CPU7: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x301>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_3>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		cache-unified;
+		next-level-cache = <&L3>;
+	};
+
+	L2_1: l2-cache1 {
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		cache-unified;
+		next-level-cache = <&L3>;
+	};
+
+	L2_2: l2-cache2 {
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		cache-unified;
+		next-level-cache = <&L3>;
+	};
+
+	L2_3: l2-cache3 {
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		cache-unified;
+		next-level-cache = <&L3>;
+	};
+
+	L3: l3-cache {
+		cache-level = <3>;
+		cache-size = <0x800000>;
+		cache-line-size = <64>;
+		cache-sets = <8192>;
+		cache-unified;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <0x0 0x7 0x4>,
+			     <0x0 0x8 0x4>,
+			     <0x0 0x9 0x4>,
+			     <0x0 0xa 0x4>,
+			     <0x0 0xb 0x4>,
+			     <0x0 0xc 0x4>,
+			     <0x0 0xd 0x4>,
+			     <0x0 0xe 0x4>;
+		interrupt-affinity = <&CPU0>,
+				     <&CPU1>,
+				     <&CPU2>,
+				     <&CPU3>,
+				     <&CPU4>,
+				     <&CPU5>,
+				     <&CPU6>,
+				     <&CPU7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
new file mode 100644
index 0000000000..690020589d
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle SoC
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+/ {
+	compatible = "amd,seattle";
+	interrupt-parent = <&gic0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	gic0: interrupt-controller@e1101000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0xe1110000 0 0x1000>,
+		      <0x0 0xe112f000 0 0x2000>,
+		      <0x0 0xe1140000 0 0x2000>,
+		      <0x0 0xe1160000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+		ranges = <0 0 0 0xe1100000 0 0x100000>;
+		v2m0: v2m@e0080000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x00080000 0 0x1000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xff04>,
+			     <1 14 0xff04>,
+			     <1 11 0xff04>,
+			     <1 10 0xff04>;
+	};
+
+	smb0: smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * dma-ranges is 40-bit address space containing:
+		 * - GICv2m MSI register is at 0xe0080000
+		 * - DRAM range [0x8000000000 to 0xffffffffff]
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		/include/ "amd-seattle-clks.dtsi"
+
+		sata0: sata@e0300000 {
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0300000 0 0xf0000>;
+			interrupts = <0 355 4>;
+			clocks = <&sataclk_333mhz>;
+			iommus = <&sata0_smmu 0x0 0x1f>;
+			dma-coherent;
+		};
+
+		/* This is for Rev B only */
+		sata1: sata@e0d00000 {
+			status = "disabled";
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0d00000 0 0xf0000>;
+			interrupts = <0 354 4>;
+			clocks = <&sataclk_333mhz>;
+			iommus = <&sata1_smmu 0x0e>,
+				 <&sata1_smmu 0x0f>,
+				 <&sata1_smmu 0x1e>;
+			dma-coherent;
+		};
+
+		sata0_smmu: iommu@e0200000 {
+			compatible = "arm,mmu-401";
+			reg = <0 0xe0200000 0 0x10000>;
+			#global-interrupts = <1>;
+			interrupts = <0 332 4>, <0 332 4>;
+			#iommu-cells = <2>;
+			dma-coherent;
+		};
+
+		sata1_smmu: iommu@e0c00000 {
+			compatible = "arm,mmu-401";
+			reg = <0 0xe0c00000 0 0x10000>;
+			#global-interrupts = <1>;
+			interrupts = <0 331 4>, <0 331 4>;
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		i2c0: i2c@e1000000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe1000000 0 0x1000>;
+			interrupts = <0 357 4>;
+			clocks = <&miscclk_250mhz>;
+		};
+
+		i2c1: i2c@e0050000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe0050000 0 0x1000>;
+			interrupts = <0 340 4>;
+			clocks = <&miscclk_250mhz>;
+		};
+
+		serial0: serial@e1010000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0xe1010000 0 0x1000>;
+			interrupts = <0 328 4>;
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		spi0: spi@e1020000 {
+			status = "disabled";
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0xe1020000 0 0x1000>;
+			spi-controller;
+			interrupts = <0 330 4>;
+			clocks = <&uartspiclk_100mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		spi1: spi@e1030000 {
+			status = "disabled";
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0xe1030000 0 0x1000>;
+			spi-controller;
+			interrupts = <0 329 4>;
+			clocks = <&uartspiclk_100mhz>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gpio0: gpio@e1040000 { /* Not available to OS for B0 */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe1040000 0 0x1000>;
+			gpio-controller;
+			interrupts = <0 359 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@e1050000 { /* [0:7] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe1050000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 358 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e0020000 { /* [8:15] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0020000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 366 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e0030000 { /* [16:23] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0030000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 365 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e0080000 { /* [24] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0080000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 361 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		ccp0: ccp@e0100000 {
+			status = "disabled";
+			compatible = "amd,ccp-seattle-v1a";
+			reg = <0 0xe0100000 0 0x10000>;
+			interrupts = <0 3 4>;
+			dma-coherent;
+			iommus = <&sata1_smmu 0x00>,
+				 <&sata1_smmu 0x02>,
+				 <&sata1_smmu 0x40>,
+				 <&sata1_smmu 0x42>;
+		};
+
+		pcie0: pcie@f0000000 {
+			compatible = "pci-host-ecam-generic";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			bus-range = <0 0x7f>;
+			msi-parent = <&v2m0>;
+			reg = <0 0xf0000000 0 0x10000000>;
+
+			interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+			interrupt-map =
+				<0x1100 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x120 0x1>,
+				<0x1100 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x121 0x1>,
+				<0x1100 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x122 0x1>,
+				<0x1100 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>,
+
+				<0x1200 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x124 0x1>,
+				<0x1200 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x125 0x1>,
+				<0x1200 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x126 0x1>,
+				<0x1200 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x127 0x1>,
+
+				<0x1300 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x128 0x1>,
+				<0x1300 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x129 0x1>,
+				<0x1300 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x12a 0x1>,
+				<0x1300 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x12b 0x1>;
+
+			dma-coherent;
+			dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
+			ranges =
+				/* I/O Memory (size=64K) */
+				<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
+				/* 32-bit MMIO (size=2G) */
+				<0x02000000 0x00 0x40000000 0x00 0x40000000 0x00 0x80000000>,
+				/* 64-bit MMIO (size= 508G) */
+				<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
+			iommu-map = <0x0 &pcie_smmu 0x0 0x10000>;
+		};
+
+		pcie_smmu: iommu@e0a00000 {
+			compatible = "arm,mmu-401";
+			reg = <0 0xe0a00000 0 0x10000>;
+			#global-interrupts = <1>;
+			interrupts = <0 333 4>, <0 333 4>;
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		/* Perf CCN504 PMU */
+		ccn: ccn@e8000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0xe8000000 0 0x1000000>;
+			interrupts = <0 380 4>;
+		};
+
+		ipmi_kcs: kcs@e0010000 {
+			status = "disabled";
+			compatible = "ipmi-kcs";
+			device_type = "ipmi";
+			reg = <0x0 0xe0010000 0 0x8>;
+			interrupts = <0 389 4>;
+			reg-size = <1>;
+			reg-spacing = <4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 0000000000..9259e547e2
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+	xgmacclk0_dma_250mhz: clk250mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_dma_250mhz";
+	};
+
+	xgmacclk0_ptp_250mhz: clk250mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_ptp_250mhz";
+	};
+
+	xgmacclk1_dma_250mhz: clk250mhz_2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_dma_250mhz";
+	};
+
+	xgmacclk1_ptp_250mhz: clk250mhz_3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_ptp_250mhz";
+	};
+
+	xgmac0: xgmac@e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>,
+		      <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+		      <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 325 4>,
+			     <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+			     <0 323 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 A1 A2 A3 A4 A5 ];
+		clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		iommus = <&xgmac0_smmu 0x00 0x17>; /* 0-7, 16-23 */
+		dma-coherent;
+	};
+
+	xgmac1: xgmac@e0900000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0900000 0 0x80000>,
+		      <0 0xe0980000 0 0x80000>,
+		      <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+		      <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 324 4>,
+			     <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+			     <0 322 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 B1 B2 B3 B4 B5 ];
+		clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		iommus = <&xgmac1_smmu 0x00 0x17>; /* 0-7, 16-23 */
+		dma-coherent;
+	};
+
+	xgmac0_smmu: iommu@e0600000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0600000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 336 4>,
+			      <0 336 4>;
+		#iommu-cells = <2>;
+		dma-coherent;
+	 };
+
+	 xgmac1_smmu: iommu@e0800000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0800000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 335 4>,
+			      <0 335 4>;
+		#iommu-cells = <2>;
+		dma-coherent;
+	 };
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
new file mode 100644
index 0000000000..8b6f57a948
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-vero4k-plus.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
new file mode 100644
index 0000000000..edce8850b3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C302 aw409 Development Board";
+	compatible = "amlogic,aw409", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x10000000>;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
new file mode 100644
index 0000000000..998f505079
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,c3-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,c3-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@4000 {
+					reg = <0x0 0x4000 0x0 0x004c>,
+					      <0x0 0x4100 0x0 0x01de>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 55>;
+				};
+			};
+
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,meson-gpio-intc",
+					     "amlogic,c3-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x0020>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,meson-s4-uart",
+					   "amlogic,meson-ao-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts
new file mode 100644
index 0000000000..c05edebb90
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-t7.dtsi"
+
+/ {
+	model = "Amlogic A311D2 AN400 Development Board";
+	compatible = "amlogic,an400", "amlogic,a311d2", "amlogic,t7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_a;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0xE0000000
+			0x00000001 0x00000000 0x00000000 0x20000000>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
+
+&uart_a {
+	clocks = <&xtal>, <&xtal>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
new file mode 100644
index 0000000000..fffdab96b1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Wesion, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-t7.dtsi"
+
+/ {
+	model = "Khadas vim4";
+	compatible = "khadas,vim4", "amlogic,a311d2", "amlogic,t7";
+
+	aliases {
+		serial0 = &uart_a;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x2 0x0>; /* 8 GB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+};
+
+&uart_a {
+	status = "okay";
+	clocks = <&xtal>, <&xtal>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
new file mode 100644
index 0000000000..1423d4a791
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu100>;
+				};
+				core1 {
+					cpu = <&cpu101>;
+				};
+				core2 {
+					cpu = <&cpu102>;
+				};
+				core3 {
+					cpu = <&cpu103>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu100: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu101: cpu@101{
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+
+		cpu102: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+
+		cpu103: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_a: serial@78000 {
+				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
+				reg = <0x0 0x78000 0x0 0x18>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
new file mode 100644
index 0000000000..69c25c68c3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-a1.dtsi"
+
+/ {
+	compatible = "amlogic,ad401", "amlogic,a1";
+	model = "Amlogic Meson A1 AD401 Development Board";
+
+	aliases {
+		serial0 = &uart_AO_B;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x8000000>;
+	};
+};
+
+&uart_AO_B {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
new file mode 100644
index 0000000000..96225c4211
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
+
+/ {
+	compatible = "amlogic,a1";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x800000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,meson-a1-pwrc";
+			#power-domain-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x1000000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
+
+
+			reset: reset-controller@0 {
+				compatible = "amlogic,meson-a1-reset";
+				reg = <0x0 0x0 0x0 0x8c>;
+				#reset-cells = <1>;
+			};
+
+			periphs_pinctrl: pinctrl@400 {
+				compatible = "amlogic,meson-a1-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@400 {
+					reg = <0x0 0x0400 0x0 0x003c>,
+					      <0x0 0x0480 0x0 0x0118>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 62>;
+				};
+
+			};
+
+			uart_AO: serial@1c00 {
+				compatible = "amlogic,meson-a1-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x1c00 0x0 0x18>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@2000 {
+				compatible = "amlogic,meson-a1-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x2000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			gpio_intc: interrupt-controller@0440 {
+				compatible = "amlogic,meson-a1-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x0440 0x0 0x14>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<49 50 51 52 53 54 55 56>;
+			};
+		};
+
+		gic: interrupt-controller@ff901000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xff901000 0x0 0x1000>,
+			      <0x0 0xff902000 0x0 0x2000>,
+			      <0x0 0xff904000 0x0 0x2000>,
+			      <0x0 0xff906000 0x0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
new file mode 100644
index 0000000000..b2d6ba6609
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1 (J100)";
+
+	/* 1024MB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	non-removable;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* UART Bluetooth */
+&uart_B {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
new file mode 100644
index 0000000000..0062667c4f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1p (J110) HW rev.2";
+
+	/* 2GiB or 4GiB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
+
+/* UART Bluetooth */
+&uart_B {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
new file mode 100644
index 0000000000..c2d22b00c1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1p (J110) Hw rev.3";
+
+	/* 2GiB or 4GiB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
new file mode 100644
index 0000000000..db605f3a22
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ * Author: Aleksandr Kazantsev <ak@tvip.ru>
+ * Author: Alexey Shevelkin <ash@tvip.ru>
+ */
+
+/dts-v1/;
+
+#include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;   /* Console */
+		serial2 = &uart_AO_B; /* External UART (Wireless Module) */
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0x0 0x400000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vccq_1v8: regulator-vccq_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCQ_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&scpi_sensors 0>;
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&efuse {
+	sn: sn@32 {
+		reg = <0x32 0x20>;
+	};
+
+	eth_mac: eth-mac@0 {
+		reg = <0x0 0x6>;
+	};
+
+	bt_mac: bt-mac@6 {
+		reg = <0x6 0x6>;
+	};
+
+	wifi_mac: wifi-mac@c {
+		reg = <0xc 0x6>;
+	};
+
+	bid: bid@12 {
+		reg = <0x12 0x20>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_x_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
+		eth_phy0: ethernet-phy@0 {
+			/* compatible = "ethernet-phy-id0243.0c54";*/
+			max-speed = <100>;
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Internal I2C bus (on CPU module) */
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_z_pins>;
+	pinctrl-names = "default";
+
+	/* RTC */
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		status = "okay";
+	};
+};
+
+/* Peripheral I2C bus (on motherboard) */
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_x20_pins>;
+	pinctrl-names = "default";
+};
+
+/* wifi module */
+&sd_emmc_b {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* emmc storage */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccq_1v8>;
+};
+
+/* UART Bluetooth */
+&uart_B {
+	status = "okay";
+	pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+/* UART Console */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* UART Wireless module */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr>;
+};
+
+&spicc1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
+	pinctrl-names = "default";
+};
+
+&gpio {
+	gpio-line-names =
+		"", "", "", "", "", // 0 - 4
+		"", "", "", "", "", // 5 - 9
+		"UserButton", "", "", "", "", // 10 - 14
+		"", "", "", "", "", // 15 - 19
+		"", "", "", "", "", // 20 - 24
+		"", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
+		"Output1", "", "", "", "", // 30 - 34
+		"", "ZigBeeBOOT", "", "", "", // 35 - 39
+		"1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
+		"Input2", "Input1", "", "", "", // 45 - 49
+		"", "", "", "", "", // 50 - 54
+		"", "", "", "", "", // 55 - 59
+		"", "", "", "", "", // 60 - 64
+		"", "", "", "", "", // 65 - 69
+		"", "", "", "", "", // 70 - 74
+		"", "", "", "", "", // 75 - 79
+		"", "", "", "", "", // 80 - 84
+		"", ""; // 85-86
+};
+
+&cpu0 {
+	#cooling-cells = <2>;
+};
+
+&cpu1 {
+	#cooling-cells = <2>;
+};
+
+&cpu2 {
+	#cooling-cells = <2>;
+};
+
+&cpu3 {
+	#cooling-cells = <2>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
new file mode 100644
index 0000000000..df16eead2c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
+	model = "Amlogic Meson AXG S400 Development Board";
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-next {
+			label = "Next";
+			linux,code = <KEY_NEXT>;
+			press-threshold-microvolt = <1116000>; /* 62% */
+		};
+
+		button-prev {
+			label = "Previous";
+			linux,code = <KEY_PREVIOUS>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-wifi {
+			label = "Wifi";
+			linux,code = <KEY_WLAN>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-voice {
+			label = "Voice";
+			linux,code = <KEY_VOICECOMMAND>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	linein: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7241";
+		VDDA-supply = <&vcc_3v3>;
+		VDDP-supply = <&vcc_3v3>;
+		VDDD-supply = <&vcc_3v3>;
+		status = "okay";
+		sound-name-prefix = "Linein";
+	};
+
+	lineout: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7154";
+		VDD-supply = <&vcc_3v3>;
+		PVDD-supply = <&vcc_5v>;
+		status = "okay";
+		sound-name-prefix = "Lineout";
+	};
+
+	spdif_dit: audio-codec-2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	dmics: audio-codec-3 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <7>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	spdif_dir: audio-codec-4 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+		status = "okay";
+		sound-name-prefix = "DIR";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	speaker-leds {
+		compatible = "gpio-leds";
+
+		aled1 {
+			label = "speaker:aled1";
+			gpios = <&gpio_speaker 7 0>;
+		};
+
+		aled2 {
+			label = "speaker:aled2";
+			gpios = <&gpio_speaker 6 0>;
+		};
+
+		aled3 {
+			label = "speaker:aled3";
+			gpios = <&gpio_speaker 5 0>;
+		};
+
+		aled4 {
+			label = "speaker:aled4";
+			gpios = <&gpio_speaker 4 0>;
+		};
+
+		aled5 {
+			label = "speaker:aled5";
+			gpios = <&gpio_speaker 3 0>;
+		};
+
+		aled6 {
+			label = "speaker:aled6";
+			gpios = <&gpio_speaker 2 0>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "AXG-S400";
+		audio-aux-devs = <&tdmin_a>, <&tdmin_b>,  <&tdmin_c>,
+				 <&tdmin_lb>, <&tdmout_c>;
+		audio-widgets = "Line", "Lineout",
+				"Line", "Linein",
+				"Speaker", "Speaker1 Left",
+				"Speaker", "Speaker1 Right";
+		audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TDMIN_LB IN 5", "TDM_C Capture",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 3", "SPDIFIN Capture",
+				"TODDR_B IN 3", "SPDIFIN Capture",
+				"TODDR_C IN 3", "SPDIFIN Capture",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"Lineout", "Lineout AOUTL",
+				"Lineout", "Lineout AOUTR",
+				"Speaker1 Left", "SPK1 OUT_A",
+				"Speaker1 Left", "SPK1 OUT_B",
+				"Speaker1 Right", "SPK1 OUT_C",
+				"Speaker1 Right", "SPK1 OUT_D",
+				"Linein AINL", "Linein",
+				"Linein AINR", "Linein";
+		assigned-clocks = <&clkc CLKID_HIFI_PLL>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <589824000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		dai-link-6 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-rx-mask-1 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&lineout>;
+			};
+
+			codec-1 {
+				sound-dai = <&speaker_amp1>;
+			};
+
+			codec-2 {
+				sound-dai = <&linein>;
+			};
+
+		};
+
+		dai-link-7 {
+			sound-dai = <&spdifout>;
+
+			codec {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-8 {
+			sound-dai = <&spdifin>;
+
+			codec {
+				sound-dai = <&spdif_dir>;
+			};
+		};
+
+		dai-link-9 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_y_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_z_pins>;
+	pinctrl-names = "default";
+
+	speaker_amp1: audio-codec@1b {
+		compatible = "ti,tas5707";
+		reg = <0x1b>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&vcc_3v3>;
+		DVDD-supply = <&vcc_3v3>;
+		PVDD_A-supply = <&main_12v>;
+		PVDD_B-supply = <&main_12v>;
+		PVDD_C-supply = <&main_12v>;
+		PVDD_D-supply = <&main_12v>;
+		sound-name-prefix = "SPK1";
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
+	pinctrl-names = "default";
+
+	gpio_speaker: gpio-controller@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
+		    <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pcieA {
+	reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcieB {
+	reset-gpios = <&gpio GPIOZ_10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_x20_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* wifi module */
+&sd_emmc_b {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* emmc storage */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&spdifin {
+	pinctrl-0 = <&spdif_in_a19_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_a20_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
+		    <&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_b {
+	pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
+		    <&tdmb_din3_pins>, <&mclk_b_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_c {
+	pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
+		    <&tdmc_din1_pins>, <&tdmc_dout2_pins>,
+		    <&mclk_c_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+	vbus-supply = <&usb_pwr>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
new file mode 100644
index 0000000000..768d0ed78d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -0,0 +1,1959 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/clock/axg-clkc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-axg-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+#include <dt-bindings/power/meson-axg-power.h>
+
+/ {
+	compatible = "amlogic,meson-axg";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc CLKID_EFUSE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+		secure-monitor = <&sm>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+	};
+
+	scpi {
+		compatible = "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: clocks-0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pcieA: pcie@f9800000 {
+			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+			reg = <0x0 0xf9800000 0x0 0x400000>,
+			      <0x0 0xff646000 0x0 0x2000>,
+			      <0x0 0xf9f00000 0x0 0x100000>;
+			reg-names = "elbi", "cfg", "config";
+			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0 0x00300000>;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>, <&clkc CLKID_PCIE_CML_EN0>;
+			clock-names = "general", "pclk", "port";
+			resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>;
+			reset-names = "port", "apb";
+			num-lanes = <1>;
+			phys = <&pcie_phy>;
+			phy-names = "pcie";
+			status = "disabled";
+		};
+
+		pcieB: pcie@fa000000 {
+			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+			reg = <0x0 0xfa000000 0x0 0x400000>,
+			      <0x0 0xff648000 0x0 0x2000>,
+			      <0x0 0xfa400000 0x0 0x100000>;
+			reg-names = "elbi", "cfg", "config";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0 0x00300000>;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>, <&clkc CLKID_PCIE_CML_EN1>;
+			clock-names = "general", "pclk", "port";
+			resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>;
+			reset-names = "port", "apb";
+			num-lanes = <1>;
+			phys = <&pcie_phy>;
+			phy-names = "pcie";
+			status = "disabled";
+		};
+
+		usb: usb@ffe09080 {
+			compatible = "amlogic,meson-axg-usb-ctrl";
+			reg = <0x0 0xffe09080 0x0 0x20>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "usb_ctrl", "ddr";
+			resets = <&reset RESET_USB_OTG>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy1>;
+			phy-names = "usb2-phy1";
+
+			dwc2: usb@ff400000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xff400000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@ff500000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff500000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		ethmac: ethernet@ff3f0000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xff3f0000 0x0 0x10000>,
+			      <0x0 0xff634540 0x0 0x8>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>;
+			status = "disabled";
+		};
+
+		pcie_phy: phy@ff644000 {
+			compatible = "amlogic,axg-pcie-phy";
+			reg = <0x0 0xff644000 0x0 0x1c>;
+			resets = <&reset RESET_PCIE_PHY>;
+			phys = <&mipi_pcie_analog_dphy>;
+			phy-names = "analog";
+			#phy-cells = <0>;
+		};
+
+		pdm: audio-controller@ff632000 {
+			compatible = "amlogic,axg-pdm";
+			reg = <0x0 0xff632000 0x0 0x34>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "PDM";
+			clocks = <&clkc_audio AUD_CLKID_PDM>,
+				 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+				 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+			clock-names = "pclk", "dclk", "sysclk";
+			status = "disabled";
+		};
+
+		periphs: bus@ff634000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff634000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+
+			hwrng: rng@18 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x18 0x0 0x4>;
+				clocks = <&clkc CLKID_RNG0>;
+				clock-names = "core";
+			};
+
+			pinctrl_periphs: pinctrl@480 {
+				compatible = "amlogic,meson-axg-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@480 {
+					reg = <0x0 0x00480 0x0 0x40>,
+					      <0x0 0x004e8 0x0 0x14>,
+					      <0x0 0x00520 0x0 0x14>,
+					      <0x0 0x00430 0x0 0x3c>;
+					reg-names = "mux", "pull", "pull-enable", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_periphs 0 0 86>;
+				};
+
+				i2c0_pins: i2c0 {
+					mux {
+						groups = "i2c0_sck",
+							 "i2c0_sda";
+						function = "i2c0";
+						bias-disable;
+					};
+				};
+
+				i2c1_x_pins: i2c1_x {
+					mux {
+						groups = "i2c1_sck_x",
+							 "i2c1_sda_x";
+						function = "i2c1";
+						bias-disable;
+					};
+				};
+
+				i2c1_z_pins: i2c1_z {
+					mux {
+						groups = "i2c1_sck_z",
+							 "i2c1_sda_z";
+						function = "i2c1";
+						bias-disable;
+					};
+				};
+
+				i2c2_a_pins: i2c2_a {
+					mux {
+						groups = "i2c2_sck_a",
+							 "i2c2_sda_a";
+						function = "i2c2";
+						bias-disable;
+					};
+				};
+
+				i2c2_x_pins: i2c2_x {
+					mux {
+						groups = "i2c2_sck_x",
+							 "i2c2_sda_x";
+						function = "i2c2";
+						bias-disable;
+					};
+				};
+
+				i2c3_a6_pins: i2c3_a6 {
+					mux {
+						groups = "i2c3_sda_a6",
+							 "i2c3_sck_a7";
+						function = "i2c3";
+						bias-disable;
+					};
+				};
+
+				i2c3_a12_pins: i2c3_a12 {
+					mux {
+						groups = "i2c3_sda_a12",
+							 "i2c3_sck_a13";
+						function = "i2c3";
+						bias-disable;
+					};
+				};
+
+				i2c3_a19_pins: i2c3_a19 {
+					mux {
+						groups = "i2c3_sda_a19",
+							 "i2c3_sck_a20";
+						function = "i2c3";
+						bias-disable;
+					};
+				};
+
+				emmc_pins: emmc {
+					mux-0 {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "emmc_cmd";
+						function = "emmc";
+						bias-pull-up;
+					};
+
+					mux-1 {
+						groups = "emmc_clk";
+						function = "emmc";
+						bias-disable;
+					};
+				};
+
+				emmc_ds_pins: emmc_ds {
+					mux {
+						groups = "emmc_ds";
+						function = "emmc";
+						bias-pull-down;
+					};
+				};
+
+				emmc_clk_gate_pins: emmc_clk_gate {
+					mux {
+						groups = "BOOT_8";
+						function = "gpio_periphs";
+						bias-pull-down;
+					};
+				};
+
+				eth_rgmii_x_pins: eth-x-rgmii {
+					mux {
+						groups = "eth_mdio_x",
+							 "eth_mdc_x",
+							 "eth_rgmii_rx_clk_x",
+							 "eth_rx_dv_x",
+							 "eth_rxd0_x",
+							 "eth_rxd1_x",
+							 "eth_rxd2_rgmii",
+							 "eth_rxd3_rgmii",
+							 "eth_rgmii_tx_clk",
+							 "eth_txen_x",
+							 "eth_txd0_x",
+							 "eth_txd1_x",
+							 "eth_txd2_rgmii",
+							 "eth_txd3_rgmii";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				eth_rgmii_y_pins: eth-y-rgmii {
+					mux {
+						groups = "eth_mdio_y",
+							 "eth_mdc_y",
+							 "eth_rgmii_rx_clk_y",
+							 "eth_rx_dv_y",
+							 "eth_rxd0_y",
+							 "eth_rxd1_y",
+							 "eth_rxd2_rgmii",
+							 "eth_rxd3_rgmii",
+							 "eth_rgmii_tx_clk",
+							 "eth_txen_y",
+							 "eth_txd0_y",
+							 "eth_txd1_y",
+							 "eth_txd2_rgmii",
+							 "eth_txd3_rgmii";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				eth_rmii_x_pins: eth-x-rmii {
+					mux {
+						groups = "eth_mdio_x",
+							 "eth_mdc_x",
+							 "eth_rgmii_rx_clk_x",
+							 "eth_rx_dv_x",
+							 "eth_rxd0_x",
+							 "eth_rxd1_x",
+							 "eth_txen_x",
+							 "eth_txd0_x",
+							 "eth_txd1_x";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				eth_rmii_y_pins: eth-y-rmii {
+					mux {
+						groups = "eth_mdio_y",
+							 "eth_mdc_y",
+							 "eth_rgmii_rx_clk_y",
+							 "eth_rx_dv_y",
+							 "eth_rxd0_y",
+							 "eth_rxd1_y",
+							 "eth_txen_y",
+							 "eth_txd0_y",
+							 "eth_txd1_y";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				mclk_b_pins: mclk_b {
+					mux {
+						groups = "mclk_b";
+						function = "mclk_b";
+						bias-disable;
+					};
+				};
+
+				mclk_c_pins: mclk_c {
+					mux {
+						groups = "mclk_c";
+						function = "mclk_c";
+						bias-disable;
+					};
+				};
+
+				pdm_dclk_a14_pins: pdm_dclk_a14 {
+					mux {
+						groups = "pdm_dclk_a14";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_dclk_a19_pins: pdm_dclk_a19 {
+					mux {
+						groups = "pdm_dclk_a19";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din0_pins: pdm_din0 {
+					mux {
+						groups = "pdm_din0";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din1_pins: pdm_din1 {
+					mux {
+						groups = "pdm_din1";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din2_pins: pdm_din2 {
+					mux {
+						groups = "pdm_din2";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din3_pins: pdm_din3 {
+					mux {
+						groups = "pdm_din3";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pwm_a_a_pins: pwm_a_a {
+					mux {
+						groups = "pwm_a_a";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_a_x18_pins: pwm_a_x18 {
+					mux {
+						groups = "pwm_a_x18";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_a_x20_pins: pwm_a_x20 {
+					mux {
+						groups = "pwm_a_x20";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_a_z_pins: pwm_a_z {
+					mux {
+						groups = "pwm_a_z";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_b_a_pins: pwm_b_a {
+					mux {
+						groups = "pwm_b_a";
+						function = "pwm_b";
+						bias-disable;
+					};
+				};
+
+				pwm_b_x_pins: pwm_b_x {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+						bias-disable;
+					};
+				};
+
+				pwm_b_z_pins: pwm_b_z {
+					mux {
+						groups = "pwm_b_z";
+						function = "pwm_b";
+						bias-disable;
+					};
+				};
+
+				pwm_c_a_pins: pwm_c_a {
+					mux {
+						groups = "pwm_c_a";
+						function = "pwm_c";
+						bias-disable;
+					};
+				};
+
+				pwm_c_x10_pins: pwm_c_x10 {
+					mux {
+						groups = "pwm_c_x10";
+						function = "pwm_c";
+						bias-disable;
+					};
+				};
+
+				pwm_c_x17_pins: pwm_c_x17 {
+					mux {
+						groups = "pwm_c_x17";
+						function = "pwm_c";
+						bias-disable;
+					};
+				};
+
+				pwm_d_x11_pins: pwm_d_x11 {
+					mux {
+						groups = "pwm_d_x11";
+						function = "pwm_d";
+						bias-disable;
+					};
+				};
+
+				pwm_d_x16_pins: pwm_d_x16 {
+					mux {
+						groups = "pwm_d_x16";
+						function = "pwm_d";
+						bias-disable;
+					};
+				};
+
+				sdio_pins: sdio {
+					mux-0 {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_cmd";
+						function = "sdio";
+						bias-pull-up;
+					};
+
+					mux-1 {
+						groups = "sdio_clk";
+						function = "sdio";
+						bias-disable;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio_clk_gate {
+					mux {
+						groups = "GPIOX_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+					};
+				};
+
+				spdif_in_z_pins: spdif_in_z {
+					mux {
+						groups = "spdif_in_z";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a1_pins: spdif_in_a1 {
+					mux {
+						groups = "spdif_in_a1";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a7_pins: spdif_in_a7 {
+					mux {
+						groups = "spdif_in_a7";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a19_pins: spdif_in_a19 {
+					mux {
+						groups = "spdif_in_a19";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a20_pins: spdif_in_a20 {
+					mux {
+						groups = "spdif_in_a20";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a1_pins: spdif_out_a1 {
+					mux {
+						groups = "spdif_out_a1";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a11_pins: spdif_out_a11 {
+					mux {
+						groups = "spdif_out_a11";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a19_pins: spdif_out_a19 {
+					mux {
+						groups = "spdif_out_a19";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a20_pins: spdif_out_a20 {
+					mux {
+						groups = "spdif_out_a20";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_z_pins: spdif_out_z {
+					mux {
+						groups = "spdif_out_z";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spi0_pins: spi0 {
+					mux {
+						groups = "spi0_miso",
+							 "spi0_mosi",
+							 "spi0_clk";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi0_ss0_pins: spi0_ss0 {
+					mux {
+						groups = "spi0_ss0";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi0_ss1_pins: spi0_ss1 {
+					mux {
+						groups = "spi0_ss1";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi0_ss2_pins: spi0_ss2 {
+					mux {
+						groups = "spi0_ss2";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi1_a_pins: spi1_a {
+					mux {
+						groups = "spi1_miso_a",
+							 "spi1_mosi_a",
+							 "spi1_clk_a";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_ss0_a_pins: spi1_ss0_a {
+					mux {
+						groups = "spi1_ss0_a";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_ss1_pins: spi1_ss1 {
+					mux {
+						groups = "spi1_ss1";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_x_pins: spi1_x {
+					mux {
+						groups = "spi1_miso_x",
+							 "spi1_mosi_x",
+							 "spi1_clk_x";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_ss0_x_pins: spi1_ss0_x {
+					mux {
+						groups = "spi1_ss0_x";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				tdma_din0_pins: tdma_din0 {
+					mux {
+						groups = "tdma_din0";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_dout0_x14_pins: tdma_dout0_x14 {
+					mux {
+						groups = "tdma_dout0_x14";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_dout0_x15_pins: tdma_dout0_x15 {
+					mux {
+						groups = "tdma_dout0_x15";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_dout1_pins: tdma_dout1 {
+					mux {
+						groups = "tdma_dout1";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_din1_pins: tdma_din1 {
+					mux {
+						groups = "tdma_din1";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_fs_pins: tdma_fs {
+					mux {
+						groups = "tdma_fs";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_fs_slv_pins: tdma_fs_slv {
+					mux {
+						groups = "tdma_fs_slv";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_sclk_pins: tdma_sclk {
+					mux {
+						groups = "tdma_sclk";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_sclk_slv_pins: tdma_sclk_slv {
+					mux {
+						groups = "tdma_sclk_slv";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdmb_din0_pins: tdmb_din0 {
+					mux {
+						groups = "tdmb_din0";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_din1_pins: tdmb_din1 {
+					mux {
+						groups = "tdmb_din1";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_din2_pins: tdmb_din2 {
+					mux {
+						groups = "tdmb_din2";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_din3_pins: tdmb_din3 {
+					mux {
+						groups = "tdmb_din3";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout0_pins: tdmb_dout0 {
+					mux {
+						groups = "tdmb_dout0";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout1_pins: tdmb_dout1 {
+					mux {
+						groups = "tdmb_dout1";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout2_pins: tdmb_dout2 {
+					mux {
+						groups = "tdmb_dout2";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout3_pins: tdmb_dout3 {
+					mux {
+						groups = "tdmb_dout3";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_fs_pins: tdmb_fs {
+					mux {
+						groups = "tdmb_fs";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_fs_slv_pins: tdmb_fs_slv {
+					mux {
+						groups = "tdmb_fs_slv";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_sclk_pins: tdmb_sclk {
+					mux {
+						groups = "tdmb_sclk";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_sclk_slv_pins: tdmb_sclk_slv {
+					mux {
+						groups = "tdmb_sclk_slv";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmc_fs_pins: tdmc_fs {
+					mux {
+						groups = "tdmc_fs";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_fs_slv_pins: tdmc_fs_slv {
+					mux {
+						groups = "tdmc_fs_slv";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_sclk_pins: tdmc_sclk {
+					mux {
+						groups = "tdmc_sclk";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_sclk_slv_pins: tdmc_sclk_slv {
+					mux {
+						groups = "tdmc_sclk_slv";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din0_pins: tdmc_din0 {
+					mux {
+						groups = "tdmc_din0";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din1_pins: tdmc_din1 {
+					mux {
+						groups = "tdmc_din1";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din2_pins: tdmc_din2 {
+					mux {
+						groups = "tdmc_din2";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din3_pins: tdmc_din3 {
+					mux {
+						groups = "tdmc_din3";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout0_pins: tdmc_dout0 {
+					mux {
+						groups = "tdmc_dout0";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout1_pins: tdmc_dout1 {
+					mux {
+						groups = "tdmc_dout1";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout2_pins: tdmc_dout2 {
+					mux {
+						groups = "tdmc_dout2";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout3_pins: tdmc_dout3 {
+					mux {
+						groups = "tdmc_dout3";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				uart_a_pins: uart_a {
+					mux {
+						groups = "uart_tx_a",
+							 "uart_rx_a";
+						function = "uart_a";
+						bias-disable;
+					};
+				};
+
+				uart_a_cts_rts_pins: uart_a_cts_rts {
+					mux {
+						groups = "uart_cts_a",
+							 "uart_rts_a";
+						function = "uart_a";
+						bias-disable;
+					};
+				};
+
+				uart_b_x_pins: uart_b_x {
+					mux {
+						groups = "uart_tx_b_x",
+							 "uart_rx_b_x";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
+					mux {
+						groups = "uart_cts_b_x",
+							 "uart_rts_b_x";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_b_z_pins: uart_b_z {
+					mux {
+						groups = "uart_tx_b_z",
+							 "uart_rx_b_z";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
+					mux {
+						groups = "uart_cts_b_z",
+							 "uart_rts_b_z";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_z_pins: uart_ao_b_z {
+					mux {
+						groups = "uart_ao_tx_b_z",
+							 "uart_ao_rx_b_z";
+						function = "uart_ao_b_z";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
+					mux {
+						groups = "uart_ao_cts_b_z",
+							 "uart_ao_rts_b_z";
+						function = "uart_ao_b_z";
+						bias-disable;
+					};
+				};
+			};
+		};
+
+		hiubus: bus@ff63c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff63c000 0x0 0x1c00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+			sysctrl: system-controller@0 {
+				compatible = "amlogic,meson-axg-hhi-sysctrl",
+					     "simple-mfd", "syscon";
+				reg = <0 0 0 0x400>;
+
+				clkc: clock-controller {
+					compatible = "amlogic,axg-clkc";
+					#clock-cells = <1>;
+					clocks = <&xtal>;
+					clock-names = "xtal";
+				};
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-axg-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+					resets = <&reset RESET_VIU>,
+						 <&reset RESET_VENC>,
+						 <&reset RESET_VCBUS>,
+						 <&reset RESET_VENCL>,
+						 <&reset RESET_VID_LOCK>;
+					reset-names = "viu", "venc", "vcbus",
+						      "vencl", "vid_lock";
+					clocks = <&clkc CLKID_VPU>,
+						 <&clkc CLKID_VAPB>;
+					clock-names = "vpu", "vapb";
+					/*
+					 * VPU clocking is provided by two identical clock paths
+					 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+					 * free mux to safely change frequency while running.
+					 * Same for VAPB but with a final gate after the glitch free mux.
+					 */
+					assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+							  <&clkc CLKID_VPU_0>,
+							  <&clkc CLKID_VPU>, /* Glitch free mux */
+							  <&clkc CLKID_VAPB_0_SEL>,
+							  <&clkc CLKID_VAPB_0>,
+							  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+					assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>,
+								 <0>, /* Do Nothing */
+								 <&clkc CLKID_VPU_0>,
+								 <&clkc CLKID_FCLK_DIV4>,
+								 <0>, /* Do Nothing */
+								 <&clkc CLKID_VAPB_0>;
+					assigned-clock-rates = <0>, /* Do Nothing */
+							       <250000000>,
+							       <0>, /* Do Nothing */
+							       <0>, /* Do Nothing */
+							       <250000000>,
+							       <0>; /* Do Nothing */
+				};
+
+				mipi_pcie_analog_dphy: phy {
+					compatible = "amlogic,axg-mipi-pcie-analog-phy";
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
+		mailbox: mailbox@ff63c404 {
+			compatible = "amlogic,meson-gxbb-mhu";
+			reg = <0 0xff63c404 0 0x4c>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
+			#mbox-cells = <1>;
+		};
+
+		mipi_dphy: phy@ff640000 {
+			compatible = "amlogic,axg-mipi-dphy";
+			reg = <0x0 0xff640000 0x0 0x100>;
+			clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+			clock-names = "pclk";
+			resets = <&reset RESET_MIPI_PHY>;
+			reset-names = "phy";
+			phys = <&mipi_pcie_analog_dphy>;
+			phy-names = "analog";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		audio: bus@ff642000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff642000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
+
+			clkc_audio: clock-controller@0 {
+				compatible = "amlogic,axg-audio-clkc";
+				reg = <0x0 0x0 0x0 0xb4>;
+				#clock-cells = <1>;
+
+				clocks = <&clkc CLKID_AUDIO>,
+					 <&clkc CLKID_MPLL0>,
+					 <&clkc CLKID_MPLL1>,
+					 <&clkc CLKID_MPLL2>,
+					 <&clkc CLKID_MPLL3>,
+					 <&clkc CLKID_HIFI_PLL>,
+					 <&clkc CLKID_FCLK_DIV3>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_GP0_PLL>;
+				clock-names = "pclk",
+					      "mst_in0",
+					      "mst_in1",
+					      "mst_in2",
+					      "mst_in3",
+					      "mst_in4",
+					      "mst_in5",
+					      "mst_in6",
+					      "mst_in7";
+
+				resets = <&reset RESET_AUDIO>;
+			};
+
+			toddr_a: audio-controller@100 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x100 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_A";
+				interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+				resets = <&arb AXG_ARB_TODDR_A>;
+				amlogic,fifo-depth = <512>;
+				status = "disabled";
+			};
+
+			toddr_b: audio-controller@140 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x140 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_B";
+				interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+				resets = <&arb AXG_ARB_TODDR_B>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			toddr_c: audio-controller@180 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x180 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_C";
+				interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+				resets = <&arb AXG_ARB_TODDR_C>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			frddr_a: audio-controller@1c0 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x1c0 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_A";
+				interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+				resets = <&arb AXG_ARB_FRDDR_A>;
+				amlogic,fifo-depth = <512>;
+				status = "disabled";
+			};
+
+			frddr_b: audio-controller@200 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x200 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_B";
+				interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+				resets = <&arb AXG_ARB_FRDDR_B>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			frddr_c: audio-controller@240 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x240 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_C";
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+				resets = <&arb AXG_ARB_FRDDR_C>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			arb: reset-controller@280 {
+				compatible = "amlogic,meson-axg-audio-arb";
+				reg = <0x0 0x280 0x0 0x4>;
+				#reset-cells = <1>;
+				clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+			};
+
+			tdmin_a: audio-controller@300 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x300 0x0 0x40>;
+				sound-name-prefix = "TDMIN_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_b: audio-controller@340 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x340 0x0 0x40>;
+				sound-name-prefix = "TDMIN_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_c: audio-controller@380 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x380 0x0 0x40>;
+				sound-name-prefix = "TDMIN_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_lb: audio-controller@3c0 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x3c0 0x0 0x40>;
+				sound-name-prefix = "TDMIN_LB";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			spdifin: audio-controller@400 {
+				compatible = "amlogic,axg-spdifin";
+				reg = <0x0 0x400 0x0 0x30>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "SPDIFIN";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+					 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+				clock-names = "pclk", "refclk";
+				status = "disabled";
+			};
+
+			spdifout: audio-controller@480 {
+				compatible = "amlogic,axg-spdifout";
+				reg = <0x0 0x480 0x0 0x50>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "SPDIFOUT";
+				clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+					 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+				clock-names = "pclk", "mclk";
+				status = "disabled";
+			};
+
+			tdmout_a: audio-controller@500 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x500 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_b: audio-controller@540 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x540 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_c: audio-controller@580 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x580 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+		};
+
+		aobus: bus@ff800000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff800000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+			sysctrl_AO: sys-ctrl@0 {
+				compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
+				reg = <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-axg-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+					clocks = <&xtal>, <&clkc CLKID_CLK81>;
+					clock-names = "xtal", "mpeg-clk";
+				};
+			};
+
+			pinctrl_aobus: pinctrl@14 {
+				compatible = "amlogic,meson-axg-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x00014 0x0 0x8>,
+					      <0x0 0x0002c 0x0 0x4>,
+					      <0x0 0x00024 0x0 0x8>;
+					reg-names = "mux", "pull", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_aobus 0 0 15>;
+				};
+
+				i2c_ao_sck_4_pins: i2c_ao_sck_4 {
+					mux {
+						groups = "i2c_ao_sck_4";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sck_8_pins: i2c_ao_sck_8 {
+					mux {
+						groups = "i2c_ao_sck_8";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sck_10_pins: i2c_ao_sck_10 {
+					mux {
+						groups = "i2c_ao_sck_10";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sda_5_pins: i2c_ao_sda_5 {
+					mux {
+						groups = "i2c_ao_sda_5";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sda_9_pins: i2c_ao_sda_9 {
+					mux {
+						groups = "i2c_ao_sda_9";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sda_11_pins: i2c_ao_sda_11 {
+					mux {
+						groups = "i2c_ao_sda_11";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				remote_input_ao_pins: remote_input_ao {
+					mux {
+						groups = "remote_input_ao";
+						function = "remote_input_ao";
+						bias-disable;
+					};
+				};
+
+				uart_ao_a_pins: uart_ao_a {
+					mux {
+						groups = "uart_ao_tx_a",
+							 "uart_ao_rx_a";
+						function = "uart_ao_a";
+						bias-disable;
+					};
+				};
+
+				uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+					mux {
+						groups = "uart_ao_cts_a",
+							 "uart_ao_rts_a";
+						function = "uart_ao_a";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_pins: uart_ao_b {
+					mux {
+						groups = "uart_ao_tx_b",
+							 "uart_ao_rx_b";
+						function = "uart_ao_b";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+					mux {
+						groups = "uart_ao_cts_b",
+							 "uart_ao_rts_b";
+						function = "uart_ao_b";
+						bias-disable;
+					};
+				};
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			pwm_AO_cd: pwm@2000 {
+				compatible = "amlogic,meson-axg-ao-pwm";
+				reg = <0x0 0x02000  0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@3000 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x3000 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4000 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x4000 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@5000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x05000 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_AO_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_AO_ab: pwm@7000 {
+				compatible = "amlogic,meson-axg-ao-pwm";
+				reg = <0x0 0x07000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir@8000 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x8000 0x0 0x20>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			saradc: adc@9000 {
+				compatible = "amlogic,meson-axg-saradc",
+					"amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x38>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_SAR_ADC>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
+		};
+
+		ge2d: ge2d@ff940000 {
+			compatible = "amlogic,axg-ge2d";
+			reg = <0x0 0xff940000 0x0 0x10000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc CLKID_VAPB>;
+			resets = <&reset RESET_GE2D>;
+		};
+
+		gic: interrupt-controller@ffc01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xffc01000 0 0x1000>,
+			      <0x0 0xffc02000 0 0x2000>,
+			      <0x0 0xffc04000 0 0x2000>,
+			      <0x0 0xffc06000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		cbus: bus@ffd00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffd00000 0x0 0x25000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+
+			reset: reset-controller@1004 {
+				compatible = "amlogic,meson-axg-reset";
+				reg = <0x0 0x01004 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			gpio_intc: interrupt-controller@f080 {
+				compatible = "amlogic,meson-axg-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
+			watchdog@f0d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0xf0d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			pwm_ab: pwm@1b000 {
+				compatible = "amlogic,meson-axg-ee-pwm";
+				reg = <0x0 0x1b000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@1a000 {
+				compatible = "amlogic,meson-axg-ee-pwm";
+				reg = <0x0 0x1a000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			spicc0: spi@13000 {
+				compatible = "amlogic,meson-axg-spicc";
+				reg = <0x0 0x13000 0x0 0x3c>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC0>;
+				clock-names = "core";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@15000 {
+				compatible = "amlogic,meson-axg-spicc";
+				reg = <0x0 0x15000 0x0 0x3c>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC1>;
+				clock-names = "core";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			clk_msr: clock-measure@18000 {
+				compatible = "amlogic,meson-axg-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
+
+			i2c3: i2c@1c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1c000 0x0 0x20>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@1d000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1d000 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@1e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@1f000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1f000 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart_B: serial@23000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x23000 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+			uart_A: serial@24000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x24000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				fifo-size = <128>;
+			};
+		};
+
+		apb: bus@ffe00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+
+			sd_emmc_b: mmc@5000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x5000 0x0 0x800>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				clocks = <&clkc CLKID_SD_EMMC_B>,
+					<&clkc CLKID_SD_EMMC_B_CLK0>,
+					<&clkc CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				resets = <&reset RESET_SD_EMMC_B>;
+			};
+
+			sd_emmc_c: mmc@7000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x7000 0x0 0x800>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				clocks = <&clkc CLKID_SD_EMMC_C>,
+					<&clkc CLKID_SD_EMMC_C_CLK0>,
+					<&clkc CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				resets = <&reset RESET_SD_EMMC_C>;
+			};
+
+			usb2_phy1: phy@9020 {
+				compatible = "amlogic,meson-gxl-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x0 0x9020 0x0 0x20>;
+				clocks = <&clkc CLKID_USB>;
+				clock-names = "phy";
+				resets = <&reset RESET_USB_OTG>;
+				reset-names = "phy";
+			};
+		};
+
+		sram: sram@fffc0000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0xfffc0000 0x0 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xfffc0000 0x20000>;
+
+			cpu_scp_lpri: scp-sram@13000 {
+				compatible = "amlogic,meson-axg-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-sram@13400 {
+				compatible = "amlogic,meson-axg-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
new file mode 100644
index 0000000000..ff68b911b7
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -0,0 +1,2508 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/clock/g12a-aoclkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc0 = &sd_emmc_b; /* SD card */
+		mmc1 = &sd_emmc_c; /* eMMC */
+		mmc2 = &sd_emmc_a; /* SDIO */
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		simplefb_cvbs: framebuffer-cvbs {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-cvbs";
+			clocks = <&clkc CLKID_HDMI>,
+				 <&clkc CLKID_HTX_PCLK>,
+				 <&clkc CLKID_VPU_INTR>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "amlogic,simple-framebuffer",
+				    "simple-framebuffer";
+			amlogic,pipeline = "vpu-hdmi";
+			clocks = <&clkc CLKID_HDMI>,
+				 <&clkc CLKID_HTX_PCLK>,
+				 <&clkc CLKID_VPU_INTR>;
+			status = "disabled";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc CLKID_EFUSE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+		secure-monitor = <&sm>;
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-124999998 {
+			opp-hz = /bits/ 64 <124999998>;
+			opp-microvolt = <800000>;
+		};
+		opp-249999996 {
+			opp-hz = /bits/ 64 <249999996>;
+			opp-microvolt = <800000>;
+		};
+		opp-285714281 {
+			opp-hz = /bits/ 64 <285714281>;
+			opp-microvolt = <800000>;
+		};
+		opp-399999994 {
+			opp-hz = /bits/ 64 <399999994>;
+			opp-microvolt = <800000>;
+		};
+		opp-499999992 {
+			opp-hz = /bits/ 64 <499999992>;
+			opp-microvolt = <800000>;
+		};
+		opp-666666656 {
+			opp-hz = /bits/ 64 <666666656>;
+			opp-microvolt = <800000>;
+		};
+		opp-799999987 {
+			opp-hz = /bits/ 64 <799999987>;
+			opp-microvolt = <800000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x10000000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie: pcie@fc000000 {
+			compatible = "amlogic,g12a-pcie", "snps,dw-pcie";
+			reg = <0x0 0xfc000000 0x0 0x400000>,
+			      <0x0 0xff648000 0x0 0x2000>,
+			      <0x0 0xfc400000 0x0 0x200000>;
+			reg-names = "elbi", "cfg", "config";
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>,
+				 <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
+
+			clocks = <&clkc CLKID_PCIE_PHY
+				  &clkc CLKID_PCIE_COMB
+				  &clkc CLKID_PCIE_PLL>;
+			clock-names = "general",
+				      "pclk",
+				      "port";
+			resets = <&reset RESET_PCIE_CTRL_A>,
+				 <&reset RESET_PCIE_APB>;
+			reset-names = "port",
+				      "apb";
+			num-lanes = <1>;
+			phys = <&usb3_pcie_phy PHY_TYPE_PCIE>;
+			phy-names = "pcie";
+			status = "disabled";
+		};
+
+		ethmac: ethernet@ff3f0000 {
+			compatible = "amlogic,meson-g12a-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xff3f0000 0x0 0x10000>,
+			      <0x0 0xff634540 0x0 0x8>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+		};
+
+		apb: bus@ff600000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff600000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+
+			hdmi_tx: hdmi-tx@0 {
+				compatible = "amlogic,meson-g12a-dw-hdmi";
+				reg = <0x0 0x0 0x0 0x10000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+				resets = <&reset RESET_HDMITX_CAPB3>,
+					 <&reset RESET_HDMITX_PHY>,
+					 <&reset RESET_HDMITX>;
+				reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+				clocks = <&clkc CLKID_HDMI>,
+					 <&clkc CLKID_HTX_PCLK>,
+					 <&clkc CLKID_VPU_INTR>;
+				clock-names = "isfr", "iahb", "venci";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+
+				/* VPU VENC Input */
+				hdmi_tx_venc_port: port@0 {
+					reg = <0>;
+
+					hdmi_tx_in: endpoint {
+						remote-endpoint = <&hdmi_tx_out>;
+					};
+				};
+
+				/* TMDS Output */
+				hdmi_tx_tmds_port: port@1 {
+					reg = <1>;
+				};
+			};
+
+			apb_efuse: bus@30000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x30000 0x0 0x2000>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>;
+
+				hwrng: rng@218 {
+					compatible = "amlogic,meson-rng";
+					reg = <0x0 0x218 0x0 0x4>;
+					clocks = <&clkc CLKID_RNG0>;
+					clock-names = "core";
+				};
+			};
+
+			acodec: audio-controller@32000 {
+				compatible = "amlogic,t9015";
+				reg = <0x0 0x32000 0x0 0x14>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "ACODEC";
+				clocks = <&clkc CLKID_AUDIO_CODEC>;
+				clock-names = "pclk";
+				resets = <&reset RESET_AUDIO_CODEC>;
+				status = "disabled";
+			};
+
+			periphs: bus@34400 {
+				compatible = "simple-bus";
+				reg = <0x0 0x34400 0x0 0x400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+
+				periphs_pinctrl: pinctrl@40 {
+					compatible = "amlogic,meson-g12a-periphs-pinctrl";
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					gpio: bank@40 {
+						reg = <0x0 0x40  0x0 0x4c>,
+						      <0x0 0xe8  0x0 0x18>,
+						      <0x0 0x120 0x0 0x18>,
+						      <0x0 0x2c0 0x0 0x40>,
+						      <0x0 0x340 0x0 0x1c>;
+						reg-names = "gpio",
+							    "pull",
+							    "pull-enable",
+							    "mux",
+							    "ds";
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-ranges = <&periphs_pinctrl 0 0 86>;
+					};
+
+					cec_ao_a_h_pins: cec_ao_a_h {
+						mux {
+							groups = "cec_ao_a_h";
+							function = "cec_ao_a_h";
+							bias-disable;
+						};
+					};
+
+					cec_ao_b_h_pins: cec_ao_b_h {
+						mux {
+							groups = "cec_ao_b_h";
+							function = "cec_ao_b_h";
+							bias-disable;
+						};
+					};
+
+					emmc_ctrl_pins: emmc-ctrl {
+						mux-0 {
+							groups = "emmc_cmd";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "emmc_clk";
+							function = "emmc";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_data_4b_pins: emmc-data-4b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_data_8b_pins: emmc-data-8b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3",
+								 "emmc_nand_d4",
+								 "emmc_nand_d5",
+								 "emmc_nand_d6",
+								 "emmc_nand_d7";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_ds_pins: emmc-ds {
+						mux {
+							groups = "emmc_nand_ds";
+							function = "emmc";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_clk_gate_pins: emmc_clk_gate {
+						mux {
+							groups = "BOOT_8";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					hdmitx_ddc_pins: hdmitx_ddc {
+						mux {
+							groups = "hdmitx_sda",
+								 "hdmitx_sck";
+							function = "hdmitx";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					hdmitx_hpd_pins: hdmitx_hpd {
+						mux {
+							groups = "hdmitx_hpd_in";
+							function = "hdmitx";
+							bias-disable;
+						};
+					};
+
+
+					i2c0_sda_c_pins: i2c0-sda-c {
+						mux {
+							groups = "i2c0_sda_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+
+						};
+					};
+
+					i2c0_sck_c_pins: i2c0-sck-c {
+						mux {
+							groups = "i2c0_sck_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z0_pins: i2c0-sda-z0 {
+						mux {
+							groups = "i2c0_sda_z0";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sck_z1_pins: i2c0-sck-z1 {
+						mux {
+							groups = "i2c0_sck_z1";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z7_pins: i2c0-sda-z7 {
+						mux {
+							groups = "i2c0_sda_z7";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z8_pins: i2c0-sda-z8 {
+						mux {
+							groups = "i2c0_sda_z8";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_x_pins: i2c1-sda-x {
+						mux {
+							groups = "i2c1_sda_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_x_pins: i2c1-sck-x {
+						mux {
+							groups = "i2c1_sck_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h2_pins: i2c1-sda-h2 {
+						mux {
+							groups = "i2c1_sda_h2";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h3_pins: i2c1-sck-h3 {
+						mux {
+							groups = "i2c1_sck_h3";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h6_pins: i2c1-sda-h6 {
+						mux {
+							groups = "i2c1_sda_h6";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h7_pins: i2c1-sck-h7 {
+						mux {
+							groups = "i2c1_sck_h7";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_x_pins: i2c2-sda-x {
+						mux {
+							groups = "i2c2_sda_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_x_pins: i2c2-sck-x {
+						mux {
+							groups = "i2c2_sck_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_z_pins: i2c2-sda-z {
+						mux {
+							groups = "i2c2_sda_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_z_pins: i2c2-sck-z {
+						mux {
+							groups = "i2c2_sck_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_h_pins: i2c3-sda-h {
+						mux {
+							groups = "i2c3_sda_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_h_pins: i2c3-sck-h {
+						mux {
+							groups = "i2c3_sck_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_a_pins: i2c3-sda-a {
+						mux {
+							groups = "i2c3_sda_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_a_pins: i2c3-sck-a {
+						mux {
+							groups = "i2c3_sck_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk0_a_pins: mclk0-a {
+						mux {
+							groups = "mclk0_a";
+							function = "mclk0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_a_pins: mclk1-a {
+						mux {
+							groups = "mclk1_a";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_x_pins: mclk1-x {
+						mux {
+							groups = "mclk1_x";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_z_pins: mclk1-z {
+						mux {
+							groups = "mclk1_z";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					nor_pins: nor {
+						mux {
+							groups = "nor_d",
+							       "nor_q",
+							       "nor_c",
+							       "nor_cs";
+							function = "nor";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_a_pins: pdm-din0-a {
+						mux {
+							groups = "pdm_din0_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_c_pins: pdm-din0-c {
+						mux {
+							groups = "pdm_din0_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_x_pins: pdm-din0-x {
+						mux {
+							groups = "pdm_din0_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_z_pins: pdm-din0-z {
+						mux {
+							groups = "pdm_din0_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_a_pins: pdm-din1-a {
+						mux {
+							groups = "pdm_din1_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_c_pins: pdm-din1-c {
+						mux {
+							groups = "pdm_din1_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_x_pins: pdm-din1-x {
+						mux {
+							groups = "pdm_din1_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_z_pins: pdm-din1-z {
+						mux {
+							groups = "pdm_din1_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_a_pins: pdm-din2-a {
+						mux {
+							groups = "pdm_din2_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_c_pins: pdm-din2-c {
+						mux {
+							groups = "pdm_din2_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_x_pins: pdm-din2-x {
+						mux {
+							groups = "pdm_din2_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_z_pins: pdm-din2-z {
+						mux {
+							groups = "pdm_din2_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_a_pins: pdm-din3-a {
+						mux {
+							groups = "pdm_din3_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_c_pins: pdm-din3-c {
+						mux {
+							groups = "pdm_din3_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_x_pins: pdm-din3-x {
+						mux {
+							groups = "pdm_din3_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_z_pins: pdm-din3-z {
+						mux {
+							groups = "pdm_din3_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_dclk_a_pins: pdm-dclk-a {
+						mux {
+							groups = "pdm_dclk_a";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_c_pins: pdm-dclk-c {
+						mux {
+							groups = "pdm_dclk_c";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_x_pins: pdm-dclk-x {
+						mux {
+							groups = "pdm_dclk_x";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_z_pins: pdm-dclk-z {
+						mux {
+							groups = "pdm_dclk_z";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pwm_a_pins: pwm-a {
+						mux {
+							groups = "pwm_a";
+							function = "pwm_a";
+							bias-disable;
+						};
+					};
+
+					pwm_b_x7_pins: pwm-b-x7 {
+						mux {
+							groups = "pwm_b_x7";
+							function = "pwm_b";
+							bias-disable;
+						};
+					};
+
+					pwm_b_x19_pins: pwm-b-x19 {
+						mux {
+							groups = "pwm_b_x19";
+							function = "pwm_b";
+							bias-disable;
+						};
+					};
+
+					pwm_c_c_pins: pwm-c-c {
+						mux {
+							groups = "pwm_c_c";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_c_x5_pins: pwm-c-x5 {
+						mux {
+							groups = "pwm_c_x5";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_c_x8_pins: pwm-c-x8 {
+						mux {
+							groups = "pwm_c_x8";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_d_x3_pins: pwm-d-x3 {
+						mux {
+							groups = "pwm_d_x3";
+							function = "pwm_d";
+							bias-disable;
+						};
+					};
+
+					pwm_d_x6_pins: pwm-d-x6 {
+						mux {
+							groups = "pwm_d_x6";
+							function = "pwm_d";
+							bias-disable;
+						};
+					};
+
+					pwm_e_pins: pwm-e {
+						mux {
+							groups = "pwm_e";
+							function = "pwm_e";
+							bias-disable;
+						};
+					};
+
+					pwm_f_z_pins: pwm-f-z {
+						mux {
+							groups = "pwm_f_z";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_a_pins: pwm-f-a {
+						mux {
+							groups = "pwm_f_a";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_x_pins: pwm-f-x {
+						mux {
+							groups = "pwm_f_x";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_h_pins: pwm-f-h {
+						mux {
+							groups = "pwm_f_h";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					sdcard_c_pins: sdcard_c {
+						mux-0 {
+							groups = "sdcard_d0_c",
+								 "sdcard_d1_c",
+								 "sdcard_d2_c",
+								 "sdcard_d3_c",
+								 "sdcard_cmd_c";
+							function = "sdcard";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "sdcard_clk_c";
+							function = "sdcard";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_clk_gate_c_pins: sdcard_clk_gate_c {
+						mux {
+							groups = "GPIOC_4";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_z_pins: sdcard_z {
+						mux-0 {
+							groups = "sdcard_d0_z",
+								 "sdcard_d1_z",
+								 "sdcard_d2_z",
+								 "sdcard_d3_z",
+								 "sdcard_cmd_z";
+							function = "sdcard";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "sdcard_clk_z";
+							function = "sdcard";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_clk_gate_z_pins: sdcard_clk_gate_z {
+						mux {
+							groups = "GPIOZ_6";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdio_pins: sdio {
+						mux {
+							groups = "sdio_d0",
+								 "sdio_d1",
+								 "sdio_d2",
+								 "sdio_d3",
+								 "sdio_clk",
+								 "sdio_cmd";
+							function = "sdio";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdio_clk_gate_pins: sdio_clk_gate {
+						mux {
+							groups = "GPIOX_4";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					spdif_in_a10_pins: spdif-in-a10 {
+						mux {
+							groups = "spdif_in_a10";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_a12_pins: spdif-in-a12 {
+						mux {
+							groups = "spdif_in_a12";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_h_pins: spdif-in-h {
+						mux {
+							groups = "spdif_in_h";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_out_h_pins: spdif-out-h {
+						mux {
+							groups = "spdif_out_h";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a11_pins: spdif-out-a11 {
+						mux {
+							groups = "spdif_out_a11";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a13_pins: spdif-out-a13 {
+						mux {
+							groups = "spdif_out_a13";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spicc0_x_pins: spicc0-x {
+						mux {
+							groups = "spi0_mosi_x",
+							       "spi0_miso_x",
+							       "spi0_clk_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_ss0_x_pins: spicc0-ss0-x {
+						mux {
+							groups = "spi0_ss0_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_c_pins: spicc0-c {
+						mux {
+							groups = "spi0_mosi_c",
+							       "spi0_miso_c",
+							       "spi0_ss0_c",
+							       "spi0_clk_c";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc1_pins: spicc1 {
+						mux {
+							groups = "spi1_mosi",
+							       "spi1_miso",
+							       "spi1_clk";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					spicc1_ss0_pins: spicc1-ss0 {
+						mux {
+							groups = "spi1_ss0";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					tdm_a_din0_pins: tdm-a-din0 {
+						mux {
+							groups = "tdm_a_din0";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_din1_pins: tdm-a-din1 {
+						mux {
+							groups = "tdm_a_din1";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_a_dout0_pins: tdm-a-dout0 {
+						mux {
+							groups = "tdm_a_dout0";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_dout1_pins: tdm-a-dout1 {
+						mux {
+							groups = "tdm_a_dout1";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_fs_pins: tdm-a-fs {
+						mux {
+							groups = "tdm_a_fs";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_sclk_pins: tdm-a-sclk {
+						mux {
+							groups = "tdm_a_sclk";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_slv_fs_pins: tdm-a-slv-fs {
+						mux {
+							groups = "tdm_a_slv_fs";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_slv_sclk_pins: tdm-a-slv-sclk {
+						mux {
+							groups = "tdm_a_slv_sclk";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din0_pins: tdm-b-din0 {
+						mux {
+							groups = "tdm_b_din0";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din1_pins: tdm-b-din1 {
+						mux {
+							groups = "tdm_b_din1";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din2_pins: tdm-b-din2 {
+						mux {
+							groups = "tdm_b_din2";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_a_pins: tdm-b-din3-a {
+						mux {
+							groups = "tdm_b_din3_a";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_h_pins: tdm-b-din3-h {
+						mux {
+							groups = "tdm_b_din3_h";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_dout0_pins: tdm-b-dout0 {
+						mux {
+							groups = "tdm_b_dout0";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout1_pins: tdm-b-dout1 {
+						mux {
+							groups = "tdm_b_dout1";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout2_pins: tdm-b-dout2 {
+						mux {
+							groups = "tdm_b_dout2";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_a_pins: tdm-b-dout3-a {
+						mux {
+							groups = "tdm_b_dout3_a";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_h_pins: tdm-b-dout3-h {
+						mux {
+							groups = "tdm_b_dout3_h";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_fs_pins: tdm-b-fs {
+						mux {
+							groups = "tdm_b_fs";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_sclk_pins: tdm-b-sclk {
+						mux {
+							groups = "tdm_b_sclk";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_slv_fs_pins: tdm-b-slv-fs {
+						mux {
+							groups = "tdm_b_slv_fs";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_slv_sclk_pins: tdm-b-slv-sclk {
+						mux {
+							groups = "tdm_b_slv_sclk";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_a_pins: tdm-c-din0-a {
+						mux {
+							groups = "tdm_c_din0_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_z_pins: tdm-c-din0-z {
+						mux {
+							groups = "tdm_c_din0_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_a_pins: tdm-c-din1-a {
+						mux {
+							groups = "tdm_c_din1_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_z_pins: tdm-c-din1-z {
+						mux {
+							groups = "tdm_c_din1_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_a_pins: tdm-c-din2-a {
+						mux {
+							groups = "tdm_c_din2_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					eth_leds_pins: eth-leds {
+						mux {
+							groups = "eth_link_led",
+								 "eth_act_led";
+							function = "eth";
+							bias-disable;
+						};
+					};
+
+					eth_pins: eth {
+						mux {
+							groups = "eth_mdio",
+								 "eth_mdc",
+								 "eth_rgmii_rx_clk",
+								 "eth_rx_dv",
+								 "eth_rxd0",
+								 "eth_rxd1",
+								 "eth_txen",
+								 "eth_txd0",
+								 "eth_txd1";
+							function = "eth";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					eth_rgmii_pins: eth-rgmii {
+						mux {
+							groups = "eth_rxd2_rgmii",
+								 "eth_rxd3_rgmii",
+								 "eth_rgmii_tx_clk",
+								 "eth_txd2_rgmii",
+								 "eth_txd3_rgmii";
+							function = "eth";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_z_pins: tdm-c-din2-z {
+						mux {
+							groups = "tdm_c_din2_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_a_pins: tdm-c-din3-a {
+						mux {
+							groups = "tdm_c_din3_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_z_pins: tdm-c-din3-z {
+						mux {
+							groups = "tdm_c_din3_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_dout0_a_pins: tdm-c-dout0-a {
+						mux {
+							groups = "tdm_c_dout0_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout0_z_pins: tdm-c-dout0-z {
+						mux {
+							groups = "tdm_c_dout0_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_a_pins: tdm-c-dout1-a {
+						mux {
+							groups = "tdm_c_dout1_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_z_pins: tdm-c-dout1-z {
+						mux {
+							groups = "tdm_c_dout1_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_a_pins: tdm-c-dout2-a {
+						mux {
+							groups = "tdm_c_dout2_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_z_pins: tdm-c-dout2-z {
+						mux {
+							groups = "tdm_c_dout2_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_a_pins: tdm-c-dout3-a {
+						mux {
+							groups = "tdm_c_dout3_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_z_pins: tdm-c-dout3-z {
+						mux {
+							groups = "tdm_c_dout3_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_a_pins: tdm-c-fs-a {
+						mux {
+							groups = "tdm_c_fs_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_z_pins: tdm-c-fs-z {
+						mux {
+							groups = "tdm_c_fs_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_a_pins: tdm-c-sclk-a {
+						mux {
+							groups = "tdm_c_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_z_pins: tdm-c-sclk-z {
+						mux {
+							groups = "tdm_c_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a {
+						mux {
+							groups = "tdm_c_slv_fs_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z {
+						mux {
+							groups = "tdm_c_slv_fs_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a {
+						mux {
+							groups = "tdm_c_slv_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z {
+						mux {
+							groups = "tdm_c_slv_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					uart_a_pins: uart-a {
+						mux {
+							groups = "uart_a_tx",
+								 "uart_a_rx";
+							function = "uart_a";
+							bias-disable;
+						};
+					};
+
+					uart_a_cts_rts_pins: uart-a-cts-rts {
+						mux {
+							groups = "uart_a_cts",
+								 "uart_a_rts";
+							function = "uart_a";
+							bias-disable;
+						};
+					};
+
+					uart_b_pins: uart-b {
+						mux {
+							groups = "uart_b_tx",
+								 "uart_b_rx";
+							function = "uart_b";
+							bias-disable;
+						};
+					};
+
+					uart_c_pins: uart-c {
+						mux {
+							groups = "uart_c_tx",
+								 "uart_c_rx";
+							function = "uart_c";
+							bias-disable;
+						};
+					};
+
+					uart_c_cts_rts_pins: uart-c-cts-rts {
+						mux {
+							groups = "uart_c_cts",
+								 "uart_c_rts";
+							function = "uart_c";
+							bias-disable;
+						};
+					};
+				};
+			};
+
+			cpu_temp: temperature-sensor@34800 {
+				compatible = "amlogic,g12a-cpu-thermal",
+					     "amlogic,g12a-thermal";
+				reg = <0x0 0x34800 0x0 0x50>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
+			ddr_temp: temperature-sensor@34c00 {
+				compatible = "amlogic,g12a-ddr-thermal",
+					     "amlogic,g12a-thermal";
+				reg = <0x0 0x34c00 0x0 0x50>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
+			usb2_phy0: phy@36000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x36000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY20>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
+			dmc: bus@38000 {
+				compatible = "simple-bus";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
+
+				canvas: video-lut@48 {
+					compatible = "amlogic,canvas";
+					reg = <0x0 0x48 0x0 0x14>;
+				};
+
+				pmu: pmu@80 {
+					reg = <0x0 0x80 0x0 0x40>,
+					      <0x0 0xc00 0x0 0x40>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+				};
+			};
+
+			usb2_phy1: phy@3a000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x3a000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY21>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
+			hiu: bus@3c000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x3c000 0x0 0x1400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
+
+				hhi: system-controller@0 {
+					compatible = "amlogic,meson-gx-hhi-sysctrl",
+						     "simple-mfd", "syscon";
+					reg = <0 0 0 0x400>;
+
+					clkc: clock-controller {
+						compatible = "amlogic,g12a-clkc";
+						#clock-cells = <1>;
+						clocks = <&xtal>;
+						clock-names = "xtal";
+					};
+
+					pwrc: power-controller {
+						compatible = "amlogic,meson-g12a-pwrc";
+						#power-domain-cells = <1>;
+						amlogic,ao-sysctrl = <&rti>;
+						resets = <&reset RESET_VIU>,
+							 <&reset RESET_VENC>,
+							 <&reset RESET_VCBUS>,
+							 <&reset RESET_BT656>,
+							 <&reset RESET_RDMA>,
+							 <&reset RESET_VENCI>,
+							 <&reset RESET_VENCP>,
+							 <&reset RESET_VDAC>,
+							 <&reset RESET_VDI6>,
+							 <&reset RESET_VENCL>,
+							 <&reset RESET_VID_LOCK>;
+						reset-names = "viu", "venc", "vcbus", "bt656",
+							      "rdma", "venci", "vencp", "vdac",
+							      "vdi6", "vencl", "vid_lock";
+						clocks = <&clkc CLKID_VPU>,
+							 <&clkc CLKID_VAPB>;
+						clock-names = "vpu", "vapb";
+						/*
+						 * VPU clocking is provided by two identical clock paths
+						 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+						 * free mux to safely change frequency while running.
+						 * Same for VAPB but with a final gate after the glitch free mux.
+						 */
+						assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+								  <&clkc CLKID_VPU_0>,
+								  <&clkc CLKID_VPU>, /* Glitch free mux */
+								  <&clkc CLKID_VAPB_0_SEL>,
+								  <&clkc CLKID_VAPB_0>,
+								  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+						assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VPU_0>,
+									 <&clkc CLKID_FCLK_DIV4>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VAPB_0>;
+						assigned-clock-rates = <0>, /* Do Nothing */
+								       <666666666>,
+								       <0>, /* Do Nothing */
+								       <0>, /* Do Nothing */
+								       <250000000>,
+								       <0>; /* Do Nothing */
+					};
+				};
+			};
+
+			usb3_pcie_phy: phy@46000 {
+				compatible = "amlogic,g12a-usb3-pcie-phy";
+				reg = <0x0 0x46000 0x0 0x2000>;
+				clocks = <&clkc CLKID_PCIE_PLL>;
+				clock-names = "ref_clk";
+				resets = <&reset RESET_PCIE_PHY>;
+				reset-names = "phy";
+				assigned-clocks = <&clkc CLKID_PCIE_PLL>;
+				assigned-clock-rates = <100000000>;
+				#phy-cells = <1>;
+			};
+
+			eth_phy: mdio-multiplexer@4c000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x4c000 0x0 0xa4>;
+				clocks = <&clkc CLKID_ETH_PHY>,
+					 <&xtal>,
+					 <&clkc CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet-phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+		};
+
+		aobus: bus@ff800000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff800000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+			rti: sys-ctrl@0 {
+				compatible = "amlogic,meson-gx-ao-sysctrl",
+					     "simple-mfd", "syscon";
+				reg = <0x0 0x0 0x0 0x100>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-g12a-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+					clocks = <&xtal>, <&clkc CLKID_CLK81>;
+					clock-names = "xtal", "mpeg-clk";
+				};
+
+				ao_pinctrl: pinctrl {
+					compatible = "amlogic,meson-g12a-aobus-pinctrl";
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					gpio_ao: bank@14 {
+						reg = <0x0 0x14 0x0 0x8>,
+						      <0x0 0x1c 0x0 0x8>,
+						      <0x0 0x24 0x0 0x14>;
+						reg-names = "mux",
+							    "ds",
+							    "gpio";
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-ranges = <&ao_pinctrl 0 0 15>;
+					};
+
+					i2c_ao_sck_pins: i2c_ao_sck_pins {
+						mux {
+							groups = "i2c_ao_sck";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_pins: i2c_ao_sda {
+						mux {
+							groups = "i2c_ao_sda";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sck_e_pins: i2c_ao_sck_e {
+						mux {
+							groups = "i2c_ao_sck_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_e_pins: i2c_ao_sda_e {
+						mux {
+							groups = "i2c_ao_sda_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk0_ao_pins: mclk0-ao {
+						mux {
+							groups = "mclk0_ao";
+							function = "mclk0_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_din0_pins: tdm-ao-b-din0 {
+						mux {
+							groups = "tdm_ao_b_din0";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					spdif_ao_out_pins: spdif-ao-out {
+						mux {
+							groups = "spdif_ao_out";
+							function = "spdif_ao_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
+						mux {
+							groups = "tdm_ao_b_din1";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din2_pins: tdm-ao-b-din2 {
+						mux {
+							groups = "tdm_ao_b_din2";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
+						mux {
+							groups = "tdm_ao_b_dout0";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
+						mux {
+							groups = "tdm_ao_b_dout1";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
+						mux {
+							groups = "tdm_ao_b_dout2";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_fs_pins: tdm-ao-b-fs {
+						mux {
+							groups = "tdm_ao_b_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
+						mux {
+							groups = "tdm_ao_b_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
+						mux {
+							groups = "tdm_ao_b_slv_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
+						mux {
+							groups = "tdm_ao_b_slv_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_a_pins: uart-a-ao {
+						mux {
+							groups = "uart_ao_a_tx",
+								 "uart_ao_a_rx";
+							function = "uart_ao_a";
+							bias-disable;
+						};
+					};
+
+					uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
+						mux {
+							groups = "uart_ao_a_cts",
+								 "uart_ao_a_rts";
+							function = "uart_ao_a";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+						mux {
+							groups = "uart_ao_b_tx_2",
+								 "uart_ao_b_rx_3";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+						mux {
+							groups = "uart_ao_b_tx_8",
+								 "uart_ao_b_rx_9";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+						mux {
+							groups = "uart_ao_b_cts",
+								 "uart_ao_b_rts";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					pwm_a_e_pins: pwm-a-e {
+						mux {
+							groups = "pwm_a_e";
+							function = "pwm_a_e";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_a_pins: pwm-ao-a {
+						mux {
+							groups = "pwm_ao_a";
+							function = "pwm_ao_a";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_b_pins: pwm-ao-b {
+						mux {
+							groups = "pwm_ao_b";
+							function = "pwm_ao_b";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_c_4_pins: pwm-ao-c-4 {
+						mux {
+							groups = "pwm_ao_c_4";
+							function = "pwm_ao_c";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_c_6_pins: pwm-ao-c-6 {
+						mux {
+							groups = "pwm_ao_c_6";
+							function = "pwm_ao_c";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_5_pins: pwm-ao-d-5 {
+						mux {
+							groups = "pwm_ao_d_5";
+							function = "pwm_ao_d";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_10_pins: pwm-ao-d-10 {
+						mux {
+							groups = "pwm_ao_d_10";
+							function = "pwm_ao_d";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_e_pins: pwm-ao-d-e {
+						mux {
+							groups = "pwm_ao_d_e";
+							function = "pwm_ao_d";
+						};
+					};
+
+					remote_input_ao_pins: remote-input-ao {
+						mux {
+							groups = "remote_ao_input";
+							function = "remote_ao_input";
+							bias-disable;
+						};
+					};
+				};
+			};
+
+			vrtc: rtc@a8 {
+				compatible = "amlogic,meson-vrtc";
+				reg = <0x0 0x000a8 0x0 0x4>;
+			};
+
+			cec_AO: cec@100 {
+				compatible = "amlogic,meson-gx-ao-cec";
+				reg = <0x0 0x00100 0x0 0x14>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CEC>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			cecb_AO: cec@280 {
+				compatible = "amlogic,meson-g12a-ao-cec";
+				reg = <0x0 0x00280 0x0 0x1c>;
+				interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>;
+				clock-names = "oscin";
+				status = "disabled";
+			};
+
+			pwm_AO_cd: pwm@2000 {
+				compatible = "amlogic,meson-g12a-ao-pwm-cd";
+				reg = <0x0 0x2000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@3000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x3000 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x4000 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@5000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x05000 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			pwm_AO_ab: pwm@7000 {
+				compatible = "amlogic,meson-g12a-ao-pwm-ab";
+				reg = <0x0 0x7000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir@8000 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x8000 0x0 0x20>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			saradc: adc@9000 {
+				compatible = "amlogic,meson-g12a-saradc",
+					     "amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x48>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_SAR_ADC>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
+		};
+
+		vdec: video-decoder@ff620000 {
+			compatible = "amlogic,g12a-vdec";
+			reg = <0x0 0xff620000 0x0 0x10000>,
+			      <0x0 0xffd0e180 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&rti>;
+			amlogic,canvas = <&canvas>;
+
+			clocks = <&clkc CLKID_PARSER>,
+				 <&clkc CLKID_DOS>,
+				 <&clkc CLKID_VDEC_1>,
+				 <&clkc CLKID_VDEC_HEVC>,
+				 <&clkc CLKID_VDEC_HEVCF>;
+			clock-names = "dos_parser", "dos", "vdec_1",
+				      "vdec_hevc", "vdec_hevcf";
+			resets = <&reset RESET_PARSER>;
+			reset-names = "esparser";
+		};
+
+		vpu: vpu@ff900000 {
+			compatible = "amlogic,meson-g12a-vpu";
+			reg = <0x0 0xff900000 0x0 0x100000>,
+			      <0x0 0xff63c000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+
+			/* HDMI-TX output port */
+			hdmi_tx_port: port@1 {
+				reg = <1>;
+
+				hdmi_tx_out: endpoint {
+					remote-endpoint = <&hdmi_tx_in>;
+				};
+			};
+		};
+
+		gic: interrupt-controller@ffc01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xffc01000 0 0x1000>,
+			      <0x0 0xffc02000 0 0x2000>,
+			      <0x0 0xffc04000 0 0x2000>,
+			      <0x0 0xffc06000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		cbus: bus@ffd00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffd00000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
+
+			reset: reset-controller@1004 {
+				compatible = "amlogic,meson-axg-reset";
+				reg = <0x0 0x1004 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			gpio_intc: interrupt-controller@f080 {
+				compatible = "amlogic,meson-g12a-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
+			watchdog: watchdog@f0d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0xf0d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			spicc0: spi@13000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x13000 0x0 0x44>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC0>,
+					 <&clkc CLKID_SPICC0_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@15000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x15000 0x0 0x44>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC1>,
+					 <&clkc CLKID_SPICC1_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@14000 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				status = "disabled";
+				reg = <0x0 0x14000 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_CLK81>;
+			};
+
+			pwm_ef: pwm@19000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x19000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@1a000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x1a000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@1b000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x1b000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@1c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1c000 0x0 0x20>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c2: i2c@1d000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1d000 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c1: i2c@1e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c0: i2c@1f000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1f000 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			clk_msr: clock-measure@18000 {
+				compatible = "amlogic,meson-g12a-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
+
+			uart_C: serial@22000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
+				reg = <0x0 0x22000 0x0 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_B: serial@23000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
+				reg = <0x0 0x23000 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_A: serial@24000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
+				reg = <0x0 0x24000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+				fifo-size = <128>;
+			};
+		};
+
+		sd_emmc_a: mmc@ffe03000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe03000 0x0 0x800>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_A>,
+				 <&clkc CLKID_SD_EMMC_A_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_A>;
+		};
+
+		sd_emmc_b: mmc@ffe05000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe05000 0x0 0x800>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_B>,
+				 <&clkc CLKID_SD_EMMC_B_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_B>;
+		};
+
+		sd_emmc_c: mmc@ffe07000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe07000 0x0 0x800>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_C>,
+				 <&clkc CLKID_SD_EMMC_C_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_C>;
+		};
+
+		usb: usb@ffe09000 {
+			status = "disabled";
+			compatible = "amlogic,meson-g12a-usb-ctrl";
+			reg = <0x0 0xffe09000 0x0 0xa0>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>;
+			resets = <&reset RESET_USB>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy0>, <&usb2_phy1>,
+			       <&usb3_pcie_phy PHY_TYPE_USB3>;
+			phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
+
+			dwc2: usb@ff400000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xff400000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@ff500000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff500000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,dis_u2_susphy_quirk;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,parkmode-disable-ss-quirk;
+			};
+		};
+
+		mali: gpu@ffe40000 {
+			compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+			reg = <0x0 0xffe40000 0x0 0x40000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&clkc CLKID_MALI>;
+			resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <95000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+
+		ddr_thermal: ddr-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&ddr_temp>;
+
+			trips {
+				ddr_passive: ddr-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				ddr_critical: ddr-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&ddr_passive>;
+					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,no-tick-in-suspend;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	npu: npu@ff100000 {
+		compatible = "vivante,gc";
+		reg = <0x0 0xff100000 0x0 0x20000>;
+		interrupts = <0 147 4>;
+		clocks = <&clkc CLKID_NNA_CORE_CLK>,
+			 <&clkc CLKID_NNA_AXI_CLK>;
+		clock-names = "core", "bus";
+		resets = <&reset RESET_NNA>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
new file mode 100644
index 0000000000..6a1f4dcf64
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#include "meson-g12-common.dtsi"
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/power/meson-g12a-power.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+/ {
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+};
+
+&apb {
+	pdm: audio-controller@40000 {
+		compatible = "amlogic,g12a-pdm",
+			     "amlogic,axg-pdm";
+		reg = <0x0 0x40000 0x0 0x34>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "PDM";
+		clocks = <&clkc_audio AUD_CLKID_PDM>,
+			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
+		status = "disabled";
+	};
+
+	audio: bus@42000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x42000 0x0 0x2000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>;
+
+		clkc_audio: clock-controller@0 {
+			status = "disabled";
+			compatible = "amlogic,g12a-audio-clkc";
+			reg = <0x0 0x0 0x0 0xb4>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clocks = <&clkc CLKID_AUDIO>,
+				 <&clkc CLKID_MPLL0>,
+				 <&clkc CLKID_MPLL1>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_MPLL3>,
+				 <&clkc CLKID_HIFI_PLL>,
+				 <&clkc CLKID_FCLK_DIV3>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <&clkc CLKID_GP0_PLL>;
+			clock-names = "pclk",
+				      "mst_in0",
+				      "mst_in1",
+				      "mst_in2",
+				      "mst_in3",
+				      "mst_in4",
+				      "mst_in5",
+				      "mst_in6",
+				      "mst_in7";
+
+			resets = <&reset RESET_AUDIO>;
+		};
+
+		toddr_a: audio-controller@100 {
+			compatible = "amlogic,g12a-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x100 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_A";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+			resets = <&arb AXG_ARB_TODDR_A>,
+				 <&clkc_audio AUD_RESET_TODDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
+			status = "disabled";
+		};
+
+		toddr_b: audio-controller@140 {
+			compatible = "amlogic,g12a-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x140 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_B";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+			resets = <&arb AXG_ARB_TODDR_B>,
+				 <&clkc_audio AUD_RESET_TODDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		toddr_c: audio-controller@180 {
+			compatible = "amlogic,g12a-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x180 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_C";
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+			resets = <&arb AXG_ARB_TODDR_C>,
+				 <&clkc_audio AUD_RESET_TODDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_a: audio-controller@1c0 {
+			compatible = "amlogic,g12a-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x1c0 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_A";
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+			resets = <&arb AXG_ARB_FRDDR_A>,
+				 <&clkc_audio AUD_RESET_FRDDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
+			status = "disabled";
+		};
+
+		frddr_b: audio-controller@200 {
+			compatible = "amlogic,g12a-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x200 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_B";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+			resets = <&arb AXG_ARB_FRDDR_B>,
+				 <&clkc_audio AUD_RESET_FRDDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_c: audio-controller@240 {
+			compatible = "amlogic,g12a-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x240 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_C";
+			interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+			resets = <&arb AXG_ARB_FRDDR_C>,
+				 <&clkc_audio AUD_RESET_FRDDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		arb: reset-controller@280 {
+			status = "disabled";
+			compatible = "amlogic,meson-axg-audio-arb";
+			reg = <0x0 0x280 0x0 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+		};
+
+		tdmin_a: audio-controller@300 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x300 0x0 0x40>;
+			sound-name-prefix = "TDMIN_A";
+			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_b: audio-controller@340 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x340 0x0 0x40>;
+			sound-name-prefix = "TDMIN_B";
+			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_c: audio-controller@380 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x380 0x0 0x40>;
+			sound-name-prefix = "TDMIN_C";
+			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_lb: audio-controller@3c0 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x3c0 0x0 0x40>;
+			sound-name-prefix = "TDMIN_LB";
+			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		spdifin: audio-controller@400 {
+			compatible = "amlogic,g12a-spdifin",
+				     "amlogic,axg-spdifin";
+			reg = <0x0 0x400 0x0 0x30>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFIN";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+				 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+			clock-names = "pclk", "refclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFIN>;
+			status = "disabled";
+		};
+
+		spdifout: audio-controller@480 {
+			compatible = "amlogic,g12a-spdifout",
+				     "amlogic,axg-spdifout";
+			reg = <0x0 0x480 0x0 0x50>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFOUT";
+			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+				 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+			clock-names = "pclk", "mclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
+			status = "disabled";
+		};
+
+		tdmout_a: audio-controller@500 {
+			compatible = "amlogic,g12a-tdmout";
+			reg = <0x0 0x500 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_A";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_b: audio-controller@540 {
+			compatible = "amlogic,g12a-tdmout";
+			reg = <0x0 0x540 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_B";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_c: audio-controller@580 {
+			compatible = "amlogic,g12a-tdmout";
+			reg = <0x0 0x580 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_C";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		spdifout_b: audio-controller@680 {
+			compatible = "amlogic,g12a-spdifout",
+				     "amlogic,axg-spdifout";
+			reg = <0x0 0x680 0x0 0x50>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFOUT_B";
+			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
+				 <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
+			clock-names = "pclk", "mclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>;
+			status = "disabled";
+		};
+
+		toacodec: audio-controller@740 {
+			compatible = "amlogic,g12a-toacodec";
+			reg = <0x0 0x740 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOACODEC";
+			resets = <&clkc_audio AUD_RESET_TOACODEC>;
+			status = "disabled";
+		};
+
+		tohdmitx: audio-controller@744 {
+			compatible = "amlogic,g12a-tohdmitx";
+			reg = <0x0 0x744 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOHDMITX";
+			resets = <&clkc_audio AUD_RESET_TOHDMITX>;
+			status = "disabled";
+		};
+	};
+};
+
+&ethmac {
+	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
+&sd_emmc_a {
+	amlogic,dram-access-quirk;
+};
+
+&simplefb_cvbs {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
+&simplefb_hdmi {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
new file mode 100644
index 0000000000..fcd7e1d8e1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "radxa,zero", "amlogic,g12a";
+	model = "Radxa Zero";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	cvbs-connector {
+		status = "disabled";
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	hdmi_pw: regulator-hdmi_pw {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_PW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "RADXA-ZERO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_pw>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "disabled";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
new file mode 100644
index 0000000000..0ad0c2b7df
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "seirobotics,sei510", "amlogic,g12a";
+	model = "SEI Robotics SEI510";
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-onoff {
+			label = "On/Off";
+			linux,code = <KEY_POWER>;
+			press-threshold-microvolt = <1700000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	mono_dac: audio-codec-0 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "U16";
+		sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
+	};
+
+	dmics: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regultor-vddao_3v3_t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SEI510";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
+				 <&tdmin_a>, <&tdmin_b>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* internal speaker interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&mono_dac>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* internal digital mics */
+		dai-link-8 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
new file mode 100644
index 0000000000..4b5d11e563
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	compatible = "amlogic,u200", "amlogic,g12a";
+	model = "Amlogic Meson G12A U200 Development Board";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c Touch */
+&i2c0 {
+	status = "okay";
+	pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c CM */
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c Audio */
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
new file mode 100644
index 0000000000..7ca904f5ac
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "amediatech,x96-max", "amlogic,g12a";
+	model = "Shenzhen Amediatech Technology Co., Ltd X96 Max";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "X96-MAX";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-x96max";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+		eee-broken-1000t;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
new file mode 100644
index 0000000000..543e70669d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include "meson-g12.dtsi"
+
+/ {
+	compatible = "amlogic,g12a";
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <831000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <981000>;
+		};
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&pmu {
+	compatible = "amlogic,g12a-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
new file mode 100644
index 0000000000..ac6f7ae1d1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-bananapi.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b";
+	model = "BananaPi M2S";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+};
+
+/* Camera (CSI) bus */
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
+	pinctrl-names = "default";
+};
+
+/* Display (DSI) bus */
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&npu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
new file mode 100644
index 0000000000..124a809010
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-khadas-vim3.dtsi"
+#include "meson-g12b-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
+};
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
new file mode 100644
index 0000000000..8e9ad1e51d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b.dtsi"
+
+/ {
+	cpu_opp_table_0: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <811000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <901000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <951000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1001000>;
+		};
+	};
+
+	cpub_opp_table_1: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <831000>;
+		};
+
+                opp-1908000000 {
+                        opp-hz = /bits/ 64 <1908000000>;
+                        opp-microvolt = <861000>;
+                };
+
+                opp-2016000000 {
+                        opp-hz = /bits/ 64 <2016000000>;
+                        opp-microvolt = <911000>;
+                };
+
+                opp-2108000000 {
+                        opp-hz = /bits/ 64 <2108000000>;
+                        opp-microvolt = <951000>;
+                };
+
+                opp-2208000000 {
+                        opp-hz = /bits/ 64 <2208000000>;
+                        opp-microvolt = <1011000>;
+                };
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
new file mode 100644
index 0000000000..13d478f9c8
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-bananapi-cm4.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
+	model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-CM4IO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&cecb_AO {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* CSI port */
+&i2c1 {
+	status = "okay";
+};
+
+/* DSI port for touchscreen */
+&i2c3 {
+	status = "okay";
+};
+
+/* miniPCIe port with USB + SIM slot */
+&pcie {
+	status = "okay";
+};
+
+&sd_emmc_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+/* Peripheral Only USB-C port */
+&usb {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
new file mode 100644
index 0000000000..995ce10d5c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#include "meson-g12b-a311d.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddio_c: regulator-vddio-c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-gpios = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>;
+		gpios-states = <1>;
+
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1040000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1040000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Ethernet to be enabled in baseboard DT */
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+/* HDMI to be enabled in baseboard DT */
+&hdmi_tx {
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&dc_in>;
+};
+
+/* "Camera" I2C bus */
+&i2c1 {
+	pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
+	pinctrl-names = "default";
+};
+
+/* Main I2C bus */
+&i2c2 {
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+};
+
+/* "ID" I2C bus */
+&i2c3 {
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddao_1v8>;
+
+	status = "okay";
+};
+
+/* on-module SDIO WiFi */
+&sd_emmc_a {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	sd-uhs-sdr104;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+
+	status = "okay";
+
+	rtl8822cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* SD card to be enabled in baseboard DT */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_c>;
+};
+
+/* on-module eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+/* on-module UART BT */
+&uart_A {
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
new file mode 100644
index 0000000000..0a6a128085
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "RST";
+			linux,code = <KEY_POWER>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 120 170 220>;
+		pwms = <&pwm_cd 1 40000 0>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+		pwm-supply = <&dc_in>;
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+		pwm-supply = <&vsys_3v3>;
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-M2S";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* Main i2c bus */
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	status = "okay";
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_d_x6_pins>;
+	pinctrl-names = "default";
+	pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	/* enable if WiFi/BT board connected */
+	status = "disabled";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	sd-uhs-sdr104;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	rtl8822cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vsys_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	/* enable if WiFi/BT board connected */
+	status = "disabled";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
new file mode 100644
index 0000000000..bb73e10b5e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b";
+	model = "Beelink GS-King X";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+		/* Using Dummy Speed */
+		gpio-fan,speed-map = <0 0>, <1 1>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "GSKING-X";
+		audio-aux-devs = <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 1",
+				"TDM_A Playback", "TDMOUT_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
new file mode 100644
index 0000000000..6eeedd54ab
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
+	model = "Beelink GT-King Pro";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			label = "power:white";
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "GTKING-PRO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
new file mode 100644
index 0000000000..3e826095e7
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
+	model = "Beelink GT-King";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "GTKING";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
new file mode 100644
index 0000000000..16dd409051
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/ {
+	model = "Khadas VIM3";
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
new file mode 100644
index 0000000000..eed2a23047
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -0,0 +1,722 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-GO-Ultra";
+
+	aliases {
+		serial0 = &uart_AO;
+		rtc0 = &vrtc;
+	};
+
+	adc-joystick-left {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 2>, <&saradc 3>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_Y>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_X>;
+			abs-range = <700 2900>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	adc-joystick-right {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_RY>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_RX>;
+			abs-range = <800 3000>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	codec_clk: codec-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+		clock-output-names = "codec_clk";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <10>;
+		pinctrl-0 = <&keypad_gpio_pins>;
+		pinctrl-names = "default";
+
+		volume-up-button {
+			label = "VOLUME-UP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>;
+		};
+		volume-down-button {
+			label = "VOLUME-DOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>;
+		};
+		dpad-up-button {
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+			gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>;
+		};
+		dpad-down-button {
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+			gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>;
+		};
+		dpad-left-button {
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+			gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>;
+		};
+		dpad-right-button {
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
+		};
+		a-button {
+			label = "A";
+			linux,code = <BTN_EAST>;
+			gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>;
+		};
+		b-button {
+			label = "B";
+			linux,code = <BTN_SOUTH>;
+			gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>;
+		};
+		y-button {
+			label = "Y";
+			linux,code = <BTN_WEST>;
+			gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		};
+		x-button {
+			label = "X";
+			linux,code = <BTN_NORTH>;
+			gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		};
+		f1-button {
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+			gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>;
+		};
+		f2-button {
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+			gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+		};
+		f3-button {
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+			gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>;
+		};
+		f4-button {
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+			gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>;
+		};
+		f5-button {
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+			gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>;
+		};
+		f6-button {
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+			gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>;
+		};
+		top-left-button {
+			label = "TOP Left";
+			linux,code = <BTN_TL>;
+			gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>;
+		};
+		top-left2-button {
+			label = "TOP Left 2";
+			linux,code = <BTN_TL2>;
+			gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
+		};
+		top-right-button {
+			label = "TOP Right";
+			linux,code = <BTN_TR>;
+			gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>;
+		};
+		top-right2-button {
+			label = "TOP Right 2";
+			linux,code = <BTN_TR2>;
+			gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_sys: regulator-vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SYS";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "Odroid GO Ultra";
+		audio-widgets = "Microphone", "Mic Jack",
+				"Headphone", "Headphones",
+				"Speaker", "Internal Speakers";
+		audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"MICL", "Mic Jack",
+				"Headphones", "HPOL",
+				"Headphones", "HPOR",
+				"Speaker Amplifier INL", "HPOL",
+				"Speaker Amplifier INR", "HPOR",
+				"Internal Speakers", "Speaker Amplifier OUTL",
+				"Internal Speakers", "Speaker Amplifier OUTR";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rk817>;
+			};
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&hp_5v>;
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+/* RK817 only supports 12.5mV steps, round up the values */
+&cpu_opp_table_0 {
+	opp-1000000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <762500>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <837500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1896000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1992000000 {
+		opp-microvolt = <1012500>;
+	};
+};
+
+/* RK818 only supports 12.5mV steps, round up the values */
+&cpub_opp_table_1 {
+	opp-1000000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <825000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <900000>;
+	};
+	opp-1800000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1908000000 {
+		opp-microvolt = <1025000>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	rk818: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vcc_2v3>;
+		vcc8-supply = <&vcc_2v3>;
+		vcc9-supply = <&vddao_3v3>;
+		boost-supply = <&vdd_sys>;
+
+		regulators {
+			vddcpu_a: DCDC_REG1 {
+				regulator-name = "vddcpu_a";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <775000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <775000>;
+				};
+			};
+
+			vdd_ee: DCDC_REG2 {
+				regulator-name = "vdd_ee";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <875000>;
+				};
+			};
+
+			vddq_1v1: DCDC_REG3 {
+				regulator-name = "vddq_1v1";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vddao_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddao_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			hp_5v: DCDC_BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "hp_5v";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddio_ao1v8: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddio_ao1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddq_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddq_1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddio_c: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddio_c";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio_intc>;
+
+		interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc5-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vdd_sys>;
+		vcc8-supply = <&vdd_sys>;
+		vcc9-supply = <&rk817_boost>;
+
+		#sound-dai-cells = <0>;
+		clocks = <&codec_clk>;
+		clock-names = "mclk";
+
+		#clock-cells = <1>;
+
+		regulators {
+			vddcpu_b: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <737500>;
+				regulator-max-microvolt = <1012500>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vddcpu_b";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_2v3: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_2v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd_codec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			rk817_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "rk817_boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			usb_host: OTG_SWITCH {
+				regulator-name = "usb_host";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&eth_phy {
+	status = "disabled";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&periphs_pinctrl {
+	keypad_gpio_pins: keypad-gpio-state {
+		mux {
+			groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3",
+			         "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7",
+				 "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
+				 "GPIOX_12", "GPIOX_13", "GPIOX_14",  "GPIOX_15",
+				 "GPIOX_16", "GPIOX_17", "GPIOX_18",  "GPIOX_19";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_c>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+
+&tdmif_b {
+	pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usb2_phy0 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+	phy-supply = <&usb_host>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
new file mode 100644
index 0000000000..ce1198ad34
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-odroid-n2.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2Plus";
+};
+
+&vddcpu_a {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_ab 0 1500 0>;
+};
+
+&vddcpu_b {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
new file mode 100644
index 0000000000..a198a91259
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-g12b-odroid-n2.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
new file mode 100644
index 0000000000..91c9769fda
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b-odroid.dtsi"
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+	};
+
+	dio2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "U19";
+		status = "okay";
+	};
+
+	hub_5v: regulator-hub_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HUB_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the Hub CHIPENABLE, LOW sets low power state */
+		gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "ODROID-N2";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
+				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
+				 <&dio2133>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"U19 INL", "ACODEC LOLP",
+				"U19 INR", "ACODEC LORP",
+				"Lineout", "U19 OUTL",
+				"Lineout", "U19 OUTR";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		/* i2s jack output interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-8 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		/* acodec glue */
+		dai-link-9 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddao_1v8>;
+	status = "okay";
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOH */
+		"", "", "", "", "", "", "", "",
+		"",
+		/* BOOT */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOC */
+		"", "", "", "", "", "", "", "",
+		/* GPIOA */
+		"PIN_44", /* GPIOA_0 */
+		"PIN_46", /* GPIOA_1 */
+		"PIN_45", /* GPIOA_2 */
+		"PIN_47", /* GPIOA_3 */
+		"PIN_26", /* GPIOA_4 */
+		"", "", "", "", "", "",
+		"PIN_42", /* GPIOA_11 */
+		"PIN_32", /* GPIOA_12 */
+		"PIN_7",  /* GPIOA_13 */
+		"PIN_27", /* GPIOA_14 */
+		"PIN_28", /* GPIOA_15 */
+		/* GPIOX */
+		"PIN_16", /* GPIOX_0 */
+		"PIN_18", /* GPIOX_1 */
+		"PIN_22", /* GPIOX_2 */
+		"PIN_11", /* GPIOX_3 */
+		"PIN_13", /* GPIOX_4 */
+		"PIN_33", /* GPIOX_5 */
+		"PIN_35", /* GPIOX_6 */
+		"PIN_15", /* GPIOX_7 */
+		"PIN_19", /* GPIOX_8 */
+		"PIN_21", /* GPIOX_9 */
+		"PIN_24", /* GPIOX_10 */
+		"PIN_23", /* GPIOX_11 */
+		"PIN_8",  /* GPIOX_12 */
+		"PIN_10", /* GPIOX_13 */
+		"PIN_29", /* GPIOX_14 */
+		"PIN_31", /* GPIOX_15 */
+		"PIN_12", /* GPIOX_16 */
+		"PIN_3",  /* GPIOX_17 */
+		"PIN_5",  /* GPIOX_18 */
+		"PIN_36"; /* GPIOX_19 */
+	/*
+	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub-hog {
+		gpio-hog;
+		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	mx25u64: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&usb {
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy1 {
+	/* Enable the hub which is connected to this port */
+	phy-supply = <&hub_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
new file mode 100644
index 0000000000..e26f3e3258
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-odroid.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2L";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "ODROID-N2L";
+		audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>,
+				 <&tdmin_c>, <&tdmin_lb>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-7 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&eth_phy {
+	status = "disabled";
+};
+
+&vddcpu_a {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_ab 0 1500 0>;
+};
+
+&vddcpu_b {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr_en>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
new file mode 100644
index 0000000000..9e12a34b28
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
+		/* Using Dummy Speed */
+		gpio-fan,speed-map = <0 0>, <1 1>;
+		#cooling-cells = <2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "n2:blue";
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the microUSB port power enable */
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&main_12v>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8120B1ABC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ddr_thermal {
+	trips {
+		ddr_active: ddr-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&ddr_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
new file mode 100644
index 0000000000..890f5bfebb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ * Copyright (c) 2022 Radxa Limited
+ * Author: Yuntian Zhang <yt@radxa.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b";
+	model = "Radxa Zero2";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial2 = &uart_A;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIOA_12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	ao_5v: regulator-ao-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8120B1ABC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "RADXA-ZERO2";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: clock-0 {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"PIN_27", "PIN_28", "PIN_7", "PIN_11", "PIN_13", "PIN_15", "PIN_18", "PIN_40",
+		"", "", "", "", "", "", "", "",
+		/* GPIOH */
+		"", "", "", "", "PIN_19", "PIN_21", "PIN_24", "PIN_23",
+		"",
+		/* BOOT */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "EMMC_PWRSEQ", "", "", "",
+		/* GPIOC */
+		"", "", "", "", "", "", "SD_CD", "PIN_36",
+		/* GPIOA */
+		"PIN_32", "PIN_12", "PIN_35", "", "", "PIN_38", "", "",
+		"", "", "", "", "LED_GREEN", "PIN_31", "PIN_3", "PIN_5",
+		/* GPIOX */
+		"", "", "", "", "", "", "SDIO_PWRSEQ", "",
+		"", "", "", "", "", "", "", "",
+		"", "BT_SHUTDOWN", "", "";
+};
+
+&gpio_ao {
+	gpio-line-names =
+		/* GPIOAO */
+		"PIN_8", "PIN_10", "", "BTN_POWER", "", "", "", "PIN_29",
+		"PIN_33", "PIN_37", "FAN", "",
+		/* GPIOE */
+		"", "", "";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&ao_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "disabled";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_ab {
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts
new file mode 100644
index 0000000000..7f66f263a2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-g12b-bananapi.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b";
+	model = "BananaPi M2S";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
new file mode 100644
index 0000000000..bba98f982a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-khadas-vim3.dtsi"
+#include "meson-g12b-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3", "amlogic,s922x", "amlogic,g12b";
+};
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
new file mode 100644
index 0000000000..44c23c9840
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b.dtsi"
+
+/ {
+	cpu_opp_table_0: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <831000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1896000000 {
+			opp-hz = /bits/ 64 <1896000000>;
+			opp-microvolt = <981000>;
+		};
+
+		opp-1992000000 {
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1001000>;
+		};
+	};
+
+	cpub_opp_table_1: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <821000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <891000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <981000>;
+		};
+
+		opp-1908000000 {
+			opp-hz = /bits/ 64 <1908000000>;
+			opp-microvolt = <1022000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
new file mode 100644
index 0000000000..098a3af6d3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "ugoos,am6", "amlogic,s922x", "amlogic,g12b";
+	model = "Ugoos AM6";
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "UGOOS-AM6";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-khadas";
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+	clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&usb1_pow>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb1_pow>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
new file mode 100644
index 0000000000..ac8b717825
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b.dtsi"
+#include "meson-g12b-s922x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP1653 Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * MP1652 Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb1_pow: regulator-usb1-pow {
+		compatible = "regulator-fixed";
+		regulator-name = "USB1_POW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* connected to SY6280A Power Switch */
+		gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_pwr_en: regulator-usb-pwr-en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to USB3 Type-A Port power enable */
+		gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&usb1_pow>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb1_pow>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
new file mode 100644
index 0000000000..86e6ceb31d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12.dtsi"
+
+/ {
+	compatible = "amlogic,g12b";
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu100>;
+				};
+
+				core1 {
+					cpu = <&cpu101>;
+				};
+
+				core2 {
+					cpu = <&cpu102>;
+				};
+
+				core3 {
+					cpu = <&cpu103>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <592>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <592>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu100: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu102: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu103: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+};
+
+&clkc {
+	compatible = "amlogic,g12b-clkc";
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&mali {
+	dma-coherent;
+};
+
+&pmu {
+	compatible = "amlogic,g12b-ddr-pmu";
+};
+
+&npu {
+	power-domains = <&pwrc PWRC_G12A_NNA_ID>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
new file mode 100644
index 0000000000..5e7b9273b0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-update {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1300000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&vcc5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	vcc_card: regulator-vcc_card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_ao3v3>;
+
+		gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+
+		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao3v3: regulator-vddio_ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	vddio_card: regulator-vddio-card {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "LIBRETECH-PC";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Speaker", "7J4-14 LEFT",
+				"Speaker", "7J4-11 RIGHT";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"7J4-14 LEFT", "AU2 OUTL",
+				"7J4-11 RIGHT", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_phy_irq_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		reg = <0>;
+		max-speed = <1000>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the reset pin of the usb HUB is driven high to take
+	 * it out of reset.
+	 */
+	usb1_rst_pins: usb1_rst_irq {
+		mux {
+			groups = "GPIODV_3";
+			function = "gpio_periphs";
+			bias-disable;
+			output-high;
+		};
+	};
+
+	/* Make sure the phy irq pin is properly configured as input */
+	eth_phy_irq_pins: eth_phy_irq {
+		mux {
+			groups = "GPIOZ_15";
+			function = "gpio_periphs";
+			bias-disable;
+			output-disable;
+		};
+	};
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc5v>;
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_C {
+	pinctrl-0 = <&i2c_c_dv18_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc: rtc@51 {
+		reg = <0x51>;
+		compatible = "nxp,pcf8563";
+		#clock-cells = <0>;
+		clock-output-names = "rtc_clkout";
+	};
+};
+
+&pwm_AO_ab {
+	pinctrl-0 = <&pwm_ao_a_3_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_card>;
+
+	status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	status = "okay";
+};
+
+&spifc {
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	gd25lq128: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb1_rst_pins>;
+	pinctrl-names = "default";
+	phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
new file mode 100644
index 0000000000..f9771b51c8
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+		opp-744000000 {
+			opp-hz = /bits/ 64 <744000000>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		compatible = "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		operating-points-v2 = <&gpu_opp_table>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
new file mode 100644
index 0000000000..18f7b73028
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either
+ * the pin-compatible S912 (GXM) or S905D (GXL) SoCs.
+ */
+
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "P230-Q200";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLP",
+				"AU2 INR", "ACODEC LORP",
+				"AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-5 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
new file mode 100644
index 0000000000..2673f0dbaf
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/meson-gxbb-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc0 = &sd_emmc_b; /* SD card */
+		mmc1 = &sd_emmc_c; /* eMMC */
+		mmc2 = &sd_emmc_a; /* SDIO */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@10000000 {
+			reg = <0x0 0x10000000 0x0 0x200000>;
+			no-map;
+		};
+
+		/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved_alt: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x10000000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		simplefb_cvbs: framebuffer-cvbs {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-cvbs";
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-hdmi";
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&scpi_sensors 0>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+		secure-monitor = <&sm>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth-mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
+	scpi {
+		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: clocks-0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cbus: bus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc1100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+			gpio_intc: interrupt-controller@9880 {
+				compatible = "amlogic,meson-gpio-intc";
+				reg = <0x0 0x9880 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+				status = "disabled";
+			};
+
+			reset: reset-controller@4404 {
+				compatible = "amlogic,meson-gxbb-reset";
+				reg = <0x0 0x04404 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x0 0x5400 0x0 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x84c0 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				fifo-size = <128>;
+			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x84dc 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x0 0x8680 0x0 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@86c0 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x8700 0x0 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			clock-measure@8758 {
+				compatible = "amlogic,meson-gx-clk-measure";
+				reg = <0x0 0x8758 0x0 0x10>;
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c@87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc: spi@8d80 {
+				compatible = "amlogic,meson-gx-spicc";
+				reg = <0x0 0x08d80 0x0 0x80>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				reg = <0x0 0x08c80 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			watchdog@98d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xc4301000 0 0x1000>,
+			      <0x0 0xc4302000 0 0x2000>,
+			      <0x0 0xc4304000 0 0x2000>,
+			      <0x0 0xc4306000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		sram: sram@c8000000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0xc8000000 0x0 0x14000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xc8000000 0x14000>;
+
+			cpu_scp_lpri: scp-sram@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-sram@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+
+		aobus: bus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+			sysctrl_AO: sys-ctrl@0 {
+				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
+				reg = <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-gx-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+				};
+			};
+
+			cec_AO: cec@100 {
+				compatible = "amlogic,meson-gx-ao-cec";
+				reg = <0x0 0x00100 0x0 0x14>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x004c0 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4e0 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x004e0 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x500 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_AO_ab: pwm@550 {
+				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
+				reg = <0x0 0x00550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir@580 {
+				compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		vdec: video-codec@c8820000 {
+			compatible = "amlogic,gx-vdec";
+			reg = <0x0 0xc8820000 0x0 0x10000>,
+			      <0x0 0xc110a580 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&sysctrl_AO>;
+			amlogic,canvas = <&canvas>;
+		};
+
+		periphs: bus@c8834000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8834000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+			hwrng: rng@0 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x0 0x0 0x4>;
+			};
+		};
+
+		dmcbus: bus@c8838000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8838000 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
+
+			canvas: video-lut@48 {
+				compatible = "amlogic,canvas";
+				reg = <0x0 0x48 0x0 0x14>;
+			};
+		};
+
+		hiubus: bus@c883c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc883c000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+			sysctrl: system-controller@0 {
+				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
+				reg = <0 0 0 0x400>;
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-gxbb-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+				};
+			};
+
+			mailbox: mailbox@404 {
+				compatible = "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson-gxbb-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000>,
+			      <0x0 0xc8834540 0x0 0x4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
+			status = "disabled";
+		};
+
+		apb: apb@d0000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xd0000000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+
+			sd_emmc_a: mmc@70000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x70000 0x0 0x800>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sd_emmc_b: mmc@72000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x72000 0x0 0x800>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sd_emmc_c: mmc@74000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x74000 0x0 0x800>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		vpu: vpu@d0100000 {
+			compatible = "amlogic,meson-gx-vpu";
+			reg = <0x0 0xd0100000 0x0 0x100000>,
+			      <0x0 0xc883c000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+
+			/* HDMI-TX output port */
+			hdmi_tx_port: port@1 {
+				reg = <1>;
+
+				hdmi_tx_out: endpoint {
+					remote-endpoint = <&hdmi_tx_in>;
+				};
+			};
+		};
+
+		hdmi_tx: hdmi-tx@c883a000 {
+			compatible = "amlogic,meson-gx-dw-hdmi";
+			reg = <0x0 0xc883a000 0x0 0x1c>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "HDMITX";
+			status = "disabled";
+
+			/* VPU VENC Input */
+			hdmi_tx_venc_port: port@0 {
+				reg = <0>;
+
+				hdmi_tx_in: endpoint {
+					remote-endpoint = <&hdmi_tx_out>;
+				};
+			};
+
+			/* TMDS Output */
+			hdmi_tx_tmds_port: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
new file mode 100644
index 0000000000..e238f1f101
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
+	model = "Videostrong KII Pro";
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led {
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KII-PRO";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101GR (0x02430c54) */
+			reg = <0>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-videostrong-kii-pro";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
new file mode 100644
index 0000000000..1fd2e56e6b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
+	model = "FriendlyARM NanoPi K2";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-stat {
+			label = "nanopi-k2:blue:stat";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_tf: regulator-vddio-tf {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_TF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+		         <1800000 1>;
+
+		regulator-settling-time-up-us = <100>;
+		regulator-settling-time-down-us = <5000>;
+	};
+
+	wifi_32k: wifi-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi_32k>;
+		clock-names = "ext_clock";
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	/* CVBS is available on CON1 pin 36, disabled by default */
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "NANOPI-K2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
+			  "VCCK En", "CON1 Header Pin31",
+			  "I2S Header Pin6", "IR In", "I2S Header Pin7",
+			  "I2S Header Pin3", "I2S Header Pin4",
+			  "I2S Header Pin5", "HDMI CEC", "SYS LED",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+			  "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+			  "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+			  "Eth PHY nRESET", "Eth PHY Intc",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL",
+			  "CON1 Header Pin33",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+			  "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+			  "eMMC Reset", "eMMC CMD",
+			  "", "", "", "", "eMMC DS",
+			  "", "",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "VDDEE Regulator", "VCCK Regulator",
+			  /* Bank GPIOY */
+			  "CON1 Header Pin7", "CON1 Header Pin11",
+			  "CON1 Header Pin13", "CON1 Header Pin15",
+			  "CON1 Header Pin18", "CON1 Header Pin19",
+			  "CON1 Header Pin22", "CON1 Header Pin21",
+			  "CON1 Header Pin24", "CON1 Header Pin23",
+			  "CON1 Header Pin26", "CON1 Header Pin29",
+			  "CON1 Header Pin32", "CON1 Header Pin8",
+			  "CON1 Header Pin10", "CON1 Header Pin16",
+			  "CON1 Header Pin12",
+			  /* Bank GPIOX */
+			  "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+			  "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+			  "WIFI Power Enable", "WIFI WAKE HOST",
+			  "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+			  "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+			  "Bluetooth UART TX", "Bluetooth UART RX",
+			  "Bluetooth UART CTS", "Bluetooth UART RTS",
+			  "", "", "", "WIFI 32K", "Bluetooth Enable",
+			  "Bluetooth WAKE HOST", "",
+			  /* Bank GPIOCLK */
+			  "", "CON1 Header Pin35", "", "";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_ao18>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_tf>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "disabled";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+/* DBG_UART */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* Bluetooth on AP6212 */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&wifi_32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddio_ao3v3>;
+		vddio-supply = <&vddio_ao18>;
+		host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* 40-pin CON1 */
+&uart_C {
+	status = "disabled";
+	pinctrl-0 = <&uart_c_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vdd_5v>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
new file mode 100644
index 0000000000..4aab1ab705
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "nexbox,a95x", "amlogic,meson-gxbb";
+	model = "NEXBOX A95X";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "a95x:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "NEXBOX-A95X";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101GR (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
new file mode 100644
index 0000000000..e6d2de7c45
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
+	model = "Hardkernel ODROID-C2";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	usb_otg_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_OTG_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/*
+		 * signal name from schematics: PWREN
+		 */
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * signal name from schematics: USB_POWER
+		 */
+		vin-supply = <&p5v0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "c2:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	p5v0: regulator-p5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	hdmi_p5v0: regulator-hdmi_p5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		/* AP2331SA-7 */
+		vin-supply = <&p5v0>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* U16 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+		/* U12/U13 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U18 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U17 RT9179GB */
+		vin-supply = <&p5v0>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		/* U11 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
+	ddr3_1v5: regulator-ddr3_1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		/* U15 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "ODROID-C2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_p5v0>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
+			  "USB HUB nRESET", "USB OTG Power En",
+			  "J7 Header Pin2", "IR In", "J7 Header Pin4",
+			  "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
+			  "HDMI CEC", "SYS LED",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+			  "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+			  "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+			  "Eth PHY nRESET", "Eth PHY Intc",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+			  "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+			  "eMMC Reset", "eMMC CMD",
+			  "", "", "", "", "", "", "",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "PWM D", "PWM B",
+			  /* Bank GPIOY */
+			  "Revision Bit0", "Revision Bit1", "",
+			  "J2 Header Pin35", "", "", "", "J2 Header Pin36",
+			  "J2 Header Pin31", "", "", "", "TF VDD En",
+			  "J2 Header Pin32", "J2 Header Pin26", "", "",
+			  /* Bank GPIOX */
+			  "J2 Header Pin29", "J2 Header Pin24",
+			  "J2 Header Pin23", "J2 Header Pin22",
+			  "J2 Header Pin21", "J2 Header Pin18",
+			  "J2 Header Pin33", "J2 Header Pin19",
+			  "J2 Header Pin16", "J2 Header Pin15",
+			  "J2 Header Pin12", "J2 Header Pin13",
+			  "J2 Header Pin8", "J2 Header Pin10",
+			  "", "", "", "", "",
+			  "J2 Header Pin11", "", "J2 Header Pin7", "",
+			  /* Bank GPIOCLK */
+			  "", "", "", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc1v8>;
+};
+
+&scpi_clocks {
+	status = "disabled";
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "disabled";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb0 {
+	status = "disabled";
+};
+
+&usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G USB 2.0 hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
new file mode 100644
index 0000000000..3c93d1898b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "amlogic,p200", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P200 Development Board";
+
+	avdd18_usb_adc: regulator-avdd18_usb_adc {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD18_USB_ADC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-esc {
+			label = "Esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@3 {
+			/* Micrel KSZ9031 (0x00221620) */
+			reg = <3>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&avdd18_usb_adc>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
new file mode 100644
index 0000000000..150a82f3b2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "amlogic,p201", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P201 Development Board";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0>, <10000>, <1000000>;
+	snps,reset-active-low;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
new file mode 100644
index 0000000000..e803a466fe
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+#include "meson-gxbb.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/* signal name in schematic: USB_PWR_EN */
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0>,
+			 <3300000 1>;
+
+		regulator-settling-time-up-us = <10000>;
+		regulator-settling-time-down-us = <150000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs_connector: cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts
new file mode 100644
index 0000000000..c928adf853
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-meta", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Meta";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts
new file mode 100644
index 0000000000..e81e1d68b5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-pro", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Pro";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts
new file mode 100644
index 0000000000..a8fca0c690
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-telos", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Telos";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
new file mode 100644
index 0000000000..e8303089bf
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "vega-s95:blue:on";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "VEGA-S95";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-vega-s9x";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
new file mode 100644
index 0000000000..af9ea32a28
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-wetek.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "wetek,hub", "amlogic,meson-gxbb";
+	model = "WeTek Hub";
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "WETEK-HUB";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-hub";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
new file mode 100644
index 0000000000..e1b74b1749
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-wetek.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "wetek,play2", "amlogic,meson-gxbb";
+	model = "WeTek Play 2";
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	leds {
+		led-wifi {
+			label = "wetek-play:wifi-status";
+			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-ethernet {
+			label = "wetek-play:ethernet-status";
+			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "WETEK-PLAY2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-play2";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
new file mode 100644
index 0000000000..94dafb9553
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			/* red in suspend or power-off */
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vddio_ao18>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
new file mode 100644
index 0000000000..12ef6e81c8
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -0,0 +1,870 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include "meson-gx.dtsi"
+#include "meson-gx-mali450.dtsi"
+#include <dt-bindings/gpio/meson-gxbb-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
+/ {
+	compatible = "amlogic,meson-gxbb";
+
+	soc {
+		usb0_phy: phy@c0000000 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000000 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		usb1_phy: phy@c0000020 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000020 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		usb0: usb@c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+	};
+};
+
+&aiu {
+	compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 14>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+				bias-disable;
+			};
+		};
+
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a_3";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_6_pins: pwm_ao_a_6 {
+			mux {
+				groups = "pwm_ao_a_6";
+				function = "pwm_ao_a_6";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_12_pins: pwm_ao_a_12 {
+			mux {
+				groups = "pwm_ao_a_12";
+				function = "pwm_ao_a_12";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+				bias-disable;
+			};
+		};
+
+		i2s_am_clk_pins: i2s_am_clk {
+			mux {
+				groups = "i2s_am_clk";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s_out_ao_clk {
+			mux {
+				groups = "i2s_out_ao_clk";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s_out_lr_clk {
+			mux {
+				groups = "i2s_out_lr_clk";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+			mux {
+				groups = "i2s_out_ch23_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+			mux {
+				groups = "i2s_out_ch45_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		spdif_out_ao_6_pins: spdif_out_ao_6 {
+			mux {
+				groups = "spdif_out_ao_6";
+				function = "spdif_out_ao";
+			};
+		};
+
+		spdif_out_ao_13_pins: spdif_out_ao_13 {
+			mux {
+				groups = "spdif_out_ao_13";
+				function = "spdif_out_ao";
+				bias-disable;
+			};
+		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&cbus {
+	spifc: spi@8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
+	};
+};
+
+&cec_AO {
+	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+	clock-names = "core";
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "mpeg-clk";
+};
+
+&efuse {
+	clocks = <&clkc CLKID_EFUSE>;
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-gxbb-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&sysctrl {
+	clkc: clock-controller {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		clocks = <&xtal>;
+		clock-names = "xtal";
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&mali {
+	compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_periphs 0 0 119>;
+		};
+
+		emmc_pins: emmc {
+			mux-0 {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd";
+				function = "emmc";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "emmc_clk";
+				function = "emmc";
+				bias-disable;
+			};
+		};
+
+		emmc_ds_pins: emmc-ds {
+			mux {
+				groups = "emmc_ds";
+				function = "emmc";
+				bias-pull-down;
+			};
+		};
+
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		spi_pins: spi-pins {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux-0 {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd";
+				function = "sdcard";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdcard_clk";
+				function = "sdcard";
+				bias-disable;
+			};
+		};
+
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_pins: sdio {
+			mux-0 {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd";
+				function = "sdio";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdio_clk";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				       "i2c_sda_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				       "i2c_sda_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				       "i2c_sda_c";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+				bias-disable;
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1";
+				function = "eth";
+				bias-disable;
+			};
+		};
+
+		pwm_a_x_pins: pwm_a_x {
+			mux {
+				groups = "pwm_a_x";
+				function = "pwm_a_x";
+				bias-disable;
+			};
+		};
+
+		pwm_a_y_pins: pwm_a_y {
+			mux {
+				groups = "pwm_a_y";
+				function = "pwm_a_y";
+				bias-disable;
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f_x";
+				bias-disable;
+			};
+		};
+
+		pwm_f_y_pins: pwm_f_y {
+			mux {
+				groups = "pwm_f_y";
+				function = "pwm_f_y";
+				bias-disable;
+			};
+		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+				bias-disable;
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch23_y_pins: i2sout_ch23_y {
+			mux {
+				groups = "i2sout_ch23_y";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch45_y_pins: i2sout_ch45_y {
+			mux {
+				groups = "i2sout_ch45_y";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch67_y_pins: i2sout_ch67_y {
+			mux {
+				groups = "i2sout_ch67_y";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		spdif_out_y_pins: spdif_out_y {
+			mux {
+				groups = "spdif_out_y";
+				function = "spdif_out";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&pwrc {
+	resets = <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_VCBUS>,
+		 <&reset RESET_BT656>,
+		 <&reset RESET_DVIN_RESET>,
+		 <&reset RESET_RDMA>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC>,
+		 <&reset RESET_VDI6>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
+	clocks = <&clkc CLKID_VPU>,
+	         <&clkc CLKID_VAPB>;
+	clock-names = "vpu", "vapb";
+	/*
+	 * VPU clocking is provided by two identical clock paths
+	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+	 * free mux to safely change frequency while running.
+	 * Same for VAPB but with a final gate after the glitch free mux.
+	 */
+	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+			  <&clkc CLKID_VPU_0>,
+			  <&clkc CLKID_VPU>, /* Glitch free mux */
+			  <&clkc CLKID_VAPB_0_SEL>,
+			  <&clkc CLKID_VAPB_0>,
+			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VPU_0>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VAPB_0>;
+	assigned-clock-rates = <0>, /* Do Nothing */
+			       <666666666>,
+			       <0>, /* Do Nothing */
+			       <0>, /* Do Nothing */
+			       <250000000>,
+			       <0>; /* Do Nothing */
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "adc_clk", "adc_sel";
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_A>;
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_B>;
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_C>;
+};
+
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
+&spicc {
+	clocks = <&clkc CLKID_SPICC>;
+	clock-names = "core";
+	resets = <&reset RESET_PERIPHS_SPICC>;
+	num-cs = <1>;
+};
+
+&spifc {
+	clocks = <&clkc CLKID_SPI>;
+};
+
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+};
+
+&vdec {
+	compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
+	clocks = <&clkc CLKID_DOS_PARSER>,
+		 <&clkc CLKID_DOS>,
+		 <&clkc CLKID_VDEC_1>,
+		 <&clkc CLKID_VDEC_HEVC>;
+	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+	resets = <&reset RESET_PARSER>;
+	reset-names = "esparser";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
new file mode 100644
index 0000000000..478e755cc8
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-mali450.dtsi"
+
+&mali {
+	compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
new file mode 100644
index 0000000000..a29b49f051
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S805X-AC";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		/*
+		 * The pads are present but no connector is soldered on
+		 * 2J2, so keep this off by default.
+		 */
+		status = "disabled";
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	dc_5v: regulator-dc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_5v>;
+
+		/*
+		 * This is controlled by GPIOAO_9 we reserve this but
+		 * claiming it as done below reset the board anyway
+		 * Need to investigate this
+		 *
+		 * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "LIBRETECH-AC";
+		audio-widgets = "Speaker", "9J5-3 LEFT",
+				"Speaker", "9J5-2 RIGHT";
+		audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
+				"9J5-2 RIGHT", "ACODEC LORN";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "7J1 Header Pin31",
+			  "", "", "", "",
+			  "IR In",
+			  "HDMI CEC",
+			  "5V VCCK Regulator",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Eth Link LED", "Eth Activity LED",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "", "7J1 Header Pin13",
+			  "7J1 Header Pin15",
+			  "7J1 Header Pin7",
+			  "7J1 Header Pin12",
+			  "7J1 Header Pin16",
+			  "7J1 Header Pin18",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
+			  "", "SPI NOR Chip Select",
+			  /* Bank CARD */
+			  "", "", "", "", "", "", "",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "7J1 Header Pin27", "7J1 Header Pin28", "",
+			  "7J1 Header Pin29",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "7J1 Header Pin22", "7J1 Header Pin26",
+			  "7J1 Header Pin36", "7J1 Header Pin38",
+			  "7J1 Header Pin40", "7J1 Header Pin37",
+			  "7J1 Header Pin33", "7J1 Header Pin35",
+			  "7J1 Header Pin19", "7J1 Header Pin21",
+			  "7J1 Header Pin24", "7J1 Header Pin23",
+			  "7J1 Header Pin8", "7J1 Header Pin10",
+			  "", "", "7J1 Header Pin32", "", "",
+			  /* Bank GPIOCLK */
+			  "", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q32: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
new file mode 100644
index 0000000000..c0d6eb5510
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S805X) P241 Development Board";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+		ethernet0 = &ethmac;
+	};
+
+	au2: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&vcc_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXL-P241";
+		audio-aux-devs = <&au2>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
new file mode 100644
index 0000000000..2997584982
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,s805x", "amlogic,meson-gxl";
+};
+
+/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
+&gpu_opp_table {
+	opp-744000000 {
+		status = "disabled";
+	};
+};
+
+&mali {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts
new file mode 100644
index 0000000000..100a1cfeea
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905d-pc", "amlogic,s905d",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905D-PC";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
new file mode 100644
index 0000000000..a4fa186f04
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "videostrong,gxl-kii-pro", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "MeCool KII Pro";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+};
+
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	linux,rc-map-name = "rc-mecool-kii-pro";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
new file mode 100644
index 0000000000..c1470416fa
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905D) P230 Development Board";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+/* P230 has exclusive choice between internal or external PHY */
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		/* External PHY reset is shared with internal PHY Led signal */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		eee-broken-1000t;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
new file mode 100644
index 0000000000..92c425d025
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p231", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905D) P231 Development Board";
+};
+
+/* P231 has only internal PHY port */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
new file mode 100644
index 0000000000..393d3cb33b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 He Yangxuan
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d-p230.dts"
+
+/ {
+	compatible = "phicomm,n1", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "Phicomm N1";
+
+	cvbs-connector {
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "n1:white:status";
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	status = "disabled";
+};
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
new file mode 100644
index 0000000000..c490dbbf06
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "smartlabs,sml5442tw", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "SmartLabs SML-5442TW";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-yellow {
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+        linux,rc-map-name = "rc-khamsin";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "qcom,qca9377-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts
new file mode 100644
index 0000000000..595b490850
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Author: Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "osmc,vero4k-plus", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "OSMC Vero 4K Plus";
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-standby {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <0>;
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		pinctrl-0 = <&eth_phy_irq_pin>;
+		pinctrl-names = "default";
+
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl_periphs {
+	/* Ensure the phy irq pin is properly configured as input */
+	eth_phy_irq_pin: eth-phy-irq {
+		mux {
+			groups = "GPIOZ_15";
+			function = "gpio_periphs";
+			bias-disable;
+			output-disable;
+		};
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&usb {
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	/* HDMI_5V also supplies the USB VBUS */
+	phy-supply = <&hdmi_5v>;
+};
+
+&usb2_phy0 {
+	/* HDMI_5V also supplies the USB VBUS */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
new file mode 100644
index 0000000000..4332191954
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
+
+/ {
+	compatible = "amlogic,s905d", "amlogic,meson-gxl";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
new file mode 100644
index 0000000000..a18d6d241a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2020 JetHome
+ * Author: Aleksandr Kazantsev <ak@tvip.ru>
+ * Author: Alexey Shevelkin <ash@tvip.ru>
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "JetHome JetHub J80";
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0x0 0x1000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;   /* Console */
+		serial1 = &uart_A;    /* Bluetooth */
+		serial2 = &uart_AO_B; /* Wireless module 1 */
+		serial3 = &uart_C;    /* Wireless module 2 */
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&efuse {
+	bt_mac: bt-mac@6 {
+		reg = <0x6 0x6>;
+	};
+
+	wifi_mac: wifi-mac@c {
+		reg = <0xc 0x6>;
+	};
+};
+
+&sn {
+	reg = <0x32 0x20>;
+};
+
+&eth_mac {
+	reg = <0x0 0x6>;
+};
+
+&bid {
+	reg = <0x12 0x20>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* Console UART */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* S905W only has access to its internal PHY */
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&internal_phy {
+	status = "okay";
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&uart_C {
+	status = "okay";
+	pinctrl-0 = <&uart_c_pins>;
+	pinctrl-names = "default";
+};
+
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_b_pins>;
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
new file mode 100644
index 0000000000..ecc9df7ca0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gxl-s905d-p231.dts:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p281", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905W) P281 Development Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
new file mode 100644
index 0000000000..6705c2082a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gxl-s905d-p231.dts:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "Oranth Tanix TX3 Mini";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+};
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
new file mode 100644
index 0000000000..c8d74e61de
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Carlo Caione
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Hwacom AmazeTV (S905X)";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
new file mode 100644
index 0000000000..fea65f2052
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Khadas VIM";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	aliases {
+		serial2 = &uart_AO_B;
+		ethernet0 = &ethmac;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "vim:red:power";
+			pwms = <&pwm_AO_ab 1 7812500 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KHADAS-VIM";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		status = "okay";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-khadas";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "Power Key In",
+			  "J9 Header Pin35",
+			  "J9 Header Pin16",
+			  "J9 Header Pin15",
+			  "J9 Header Pin33",
+			  "IR In",
+			  "HDMI CEC",
+			  "SYS LED",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Power OFF",
+			  "VCCK Enable",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "HDMI_5V_EN", "SPDIF",
+			  "J9 Header Pin37",
+			  "J9 Header Pin30",
+			  "J9 Header Pin29",
+			  "J9 Header Pin32",
+			  "J9 Header Pin31",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "", "BOOT_MODE", "", "", "eMMC Data Strobe",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+			  "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+			  "WIFI Power Enable", "WIFI WAKE HOST",
+			  "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+			  "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+			  "Bluetooth UART TX", "Bluetooth UART RX",
+			  "Bluetooth UART CTS", "Bluetooth UART RTS",
+			  "WIFI 32K", "Bluetooth Enable",
+			  "Bluetooth WAKE HOST",
+			  /* Bank GPIOCLK */
+			  "", "J9 Header Pin39";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal> , <&xtal>;
+	clock-names = "clkin0", "clkin1" ;
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+};
+
+&sd_emmc_a {
+	max-frequency = <100000000>;
+};
+
+/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
+&uart_AO {
+	status = "okay";
+};
+
+/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
new file mode 100644
index 0000000000..2825db91e4
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905X-CC V2";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vcc_card: regulator-vcc_card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_ao3v3>;
+
+		gpio = <&gpio GPIOCLK_1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+
+		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+	};
+
+	vddio_ao3v3: regulator-vddio_ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_card: regulator-vddio-card {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "LIBRETECH-CC-V2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	hdmi-supply = <&vcc5v>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_card>;
+
+	status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+
+	status = "okay";
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	nor_4u1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
new file mode 100644
index 0000000000..27093e6ac9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905x-cc", "amlogic,s905x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905X-CC";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-system {
+			label = "librecomputer:system-status";
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		led-blue {
+			label = "librecomputer:blue";
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_card: regulator-vcc-card {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* This is provided by LDOs on the eMMC daugther card */
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "LIBRETECH-CC";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "Blue LED",
+			  "SDCard Voltage Switch",
+			  "7J1 Header Pin5",
+			  "7J1 Header Pin3",
+			  "7J1 Header Pin12",
+			  "IR In",
+			  "9J3 Switch HDMI CEC/7J1 Header Pin11",
+			  "7J1 Header Pin13",
+			  /* GPIO_TEST_N */
+			  "7J1 Header Pin15";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Eth Link LED", "Eth Activity LED",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "HDMI_5V_EN", "9J1 Header Pin2",
+			  "Analog Audio Mute",
+			  "2J3 Header Pin6",
+			  "2J3 Header Pin5",
+			  "2J3 Header Pin4",
+			  "2J3 Header Pin3",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "ALT BOOT MODE", "", "", "", "eMMC Data Strobe",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "Green LED", "VCCK Enable",
+			  "7J1 Header Pin27", "7J1 Header Pin28",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "7J1 Header Pin22", "7J1 Header Pin26",
+			  "7J1 Header Pin36", "7J1 Header Pin38",
+			  "7J1 Header Pin40", "7J1 Header Pin37",
+			  "7J1 Header Pin33", "7J1 Header Pin35",
+			  "7J1 Header Pin19", "7J1 Header Pin21",
+			  "7J1 Header Pin24", "7J1 Header Pin23",
+			  "7J1 Header Pin8", "7J1 Header Pin10",
+			  "7J1 Header Pin16", "7J1 Header Pin18",
+			  "7J1 Header Pin32", "7J1 Header Pin29",
+			  "7J1 Header Pin31",
+			  /* Bank GPIOCLK */
+			  "7J1 Header Pin7", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	/*
+	 * even though the schematics don't show it:
+	 * HDMI_5V is also used as supply for the USB VBUS.
+	 */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
new file mode 100644
index 0000000000..f1acca5c44
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "nexbox,a95x", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "NEXBOX A95X (S905X)";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
new file mode 100644
index 0000000000..9b4ea6a493
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905X) P212 Development Board";
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "S905X-P212";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 0000000000..a150cc0e18
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ *   Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	/*
+	 * HDMI_5V is also used as supply for the USB VBUS.
+	 */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
new file mode 100644
index 0000000000..40c19f69e9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
+
+/ {
+	compatible = "amlogic,s905x", "amlogic,meson-gxl";
+};
+
+/* S905X only has access to its internal PHY */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
new file mode 100644
index 0000000000..17bcfa4702
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -0,0 +1,940 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gx.dtsi"
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+
+/ {
+	compatible = "amlogic,meson-gxl";
+
+	soc {
+		usb: usb@d0078080 {
+			compatible = "amlogic,meson-gxl-usb-ctrl";
+			reg = <0x0 0xd0078080 0x0 0x20>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "usb_ctrl", "ddr";
+			resets = <&reset RESET_USB_OTG>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy0>, <&usb2_phy1>;
+			phy-names = "usb2-phy0", "usb2-phy1";
+
+			dwc2: usb@c9100000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xc9100000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@c9000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xc9000000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		acodec: audio-controller@c8832000 {
+			compatible = "amlogic,t9015";
+			reg = <0x0 0xc8832000 0x0 0x14>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "ACODEC";
+			clocks = <&clkc CLKID_ACODEC>;
+			clock-names = "pclk";
+			resets = <&reset RESET_ACODEC>;
+			status = "disabled";
+		};
+
+		crypto: crypto@c883e000 {
+			compatible = "amlogic,gxl-crypto";
+			reg = <0x0 0xc883e000 0x0 0x36>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc CLKID_BLKMV>;
+			clock-names = "blkmv";
+			status = "okay";
+		};
+	};
+};
+
+&aiu {
+	compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&apb {
+	usb2_phy0: phy@78000 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78000 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+
+	usb2_phy1: phy@78020 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78020 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+};
+
+&efuse {
+	clocks = <&clkc CLKID_EFUSE>;
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+
+	mdio0: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+	};
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxl-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 14>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_0_1_pins: uart_ao_b_0_1 {
+			mux {
+				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+				bias-disable;
+			};
+		};
+
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_8_pins: pwm_ao_a_8 {
+			mux {
+				groups = "pwm_ao_a_8";
+				function = "pwm_ao_a";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_b_6_pins: pwm_ao_b_6 {
+			mux {
+				groups = "pwm_ao_b_6";
+				function = "pwm_ao_b";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+			mux {
+				groups = "i2s_out_ch23_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+			mux {
+				groups = "i2s_out_ch45_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		spdif_out_ao_6_pins: spdif_out_ao_6 {
+			mux {
+				groups = "spdif_out_ao_6";
+				function = "spdif_out_ao";
+				bias-disable;
+			};
+		};
+
+		spdif_out_ao_9_pins: spdif_out_ao_9 {
+			mux {
+				groups = "spdif_out_ao_9";
+				function = "spdif_out_ao";
+				bias-disable;
+			};
+		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+	clock-names = "core";
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "mpeg-clk";
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-gxl-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&sysctrl {
+	clkc: clock-controller {
+		compatible = "amlogic,gxl-clkc";
+		#clock-cells = <1>;
+		clocks = <&xtal>;
+		clock-names = "xtal";
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxl-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_periphs 0 0 100>;
+		};
+
+		emmc_pins: emmc {
+			mux-0 {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd";
+				function = "emmc";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "emmc_clk";
+				function = "emmc";
+				bias-disable;
+			};
+		};
+
+		emmc_ds_pins: emmc-ds {
+			mux {
+				groups = "emmc_ds";
+				function = "emmc";
+				bias-pull-down;
+			};
+		};
+
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		spi_pins: spi-pins {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux-0 {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd";
+				function = "sdcard";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdcard_clk";
+				function = "sdcard";
+				bias-disable;
+			};
+		};
+
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_pins: sdio {
+			mux-0 {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd";
+				function = "sdio";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdio_clk";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				     "i2c_sda_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				      "i2c_sda_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				      "i2c_sda_c";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
+		i2c_c_dv18_pins: i2c_c_dv18 {
+			mux {
+				groups = "i2c_sck_c_dv19",
+				      "i2c_sda_c_dv18";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
+		eth_pins: eth_c {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+				bias-disable;
+			};
+		};
+
+		eth_link_led_pins: eth_link_led {
+			mux {
+				groups = "eth_link_led";
+				function = "eth_led";
+				bias-disable;
+			};
+		};
+
+		eth_act_led_pins: eth_act_led {
+			mux {
+				groups = "eth_act_led";
+				function = "eth_led";
+			};
+		};
+		
+		pwm_a_pins: pwm_a {
+			mux {
+				groups = "pwm_a";
+				function = "pwm_a";
+				bias-disable;
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+				bias-disable;
+			};
+		};
+
+		pwm_c_pins: pwm_c {
+			mux {
+				groups = "pwm_c";
+				function = "pwm_c";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		pwm_f_clk_pins: pwm_f_clk {
+			mux {
+				groups = "pwm_f_clk";
+				function = "pwm_f";
+				bias-disable;
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f";
+				bias-disable;
+			};
+		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+				bias-disable;
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+				bias-disable;
+			};
+		};
+
+		i2s_am_clk_pins: i2s_am_clk {
+			mux {
+				groups = "i2s_am_clk";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s_out_ao_clk {
+			mux {
+				groups = "i2s_out_ao_clk";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s_out_lr_clk {
+			mux {
+				groups = "i2s_out_lr_clk";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_pins: i2s_out_ch01 {
+			mux {
+				groups = "i2s_out_ch01";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+		i2sout_ch23_z_pins: i2sout_ch23_z {
+			mux {
+				groups = "i2sout_ch23_z";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch45_z_pins: i2sout_ch45_z {
+			mux {
+				groups = "i2sout_ch45_z";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch67_z_pins: i2sout_ch67_z {
+			mux {
+				groups = "i2sout_ch67_z";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		spdif_out_h_pins: spdif_out_ao_h {
+			mux {
+				groups = "spdif_out_h";
+				function = "spdif_out";
+				bias-disable;
+			};
+		};
+	};
+
+	eth_phy_mux: mdio@558 {
+		reg = <0x0 0x558 0x0 0xc>;
+		compatible = "amlogic,gxl-mdio-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_FCLK_DIV4>;
+		clock-names = "ref";
+		mdio-parent-bus = <&mdio0>;
+
+		external_mdio: mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		internal_mdio: mdio@1 {
+			reg = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			internal_phy: ethernet-phy@8 {
+				compatible = "ethernet-phy-id0181.4400";
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <8>;
+				max-speed = <100>;
+			};
+		};
+	};
+};
+
+&pwrc {
+	resets = <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_VCBUS>,
+		 <&reset RESET_BT656>,
+		 <&reset RESET_DVIN_RESET>,
+		 <&reset RESET_RDMA>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC>,
+		 <&reset RESET_VDI6>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
+	clocks = <&clkc CLKID_VPU>,
+	         <&clkc CLKID_VAPB>;
+	clock-names = "vpu", "vapb";
+	/*
+	 * VPU clocking is provided by two identical clock paths
+	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+	 * free mux to safely change frequency while running.
+	 * Same for VAPB but with a final gate after the glitch free mux.
+	 */
+	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+			  <&clkc CLKID_VPU_0>,
+			  <&clkc CLKID_VPU>, /* Glitch free mux */
+			  <&clkc CLKID_VAPB_0_SEL>,
+			  <&clkc CLKID_VAPB_0>,
+			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VPU_0>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VAPB_0>;
+	assigned-clock-rates = <0>, /* Do Nothing */
+			       <666666666>,
+			       <0>, /* Do Nothing */
+			       <0>, /* Do Nothing */
+			       <250000000>,
+			       <0>; /* Do Nothing */
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "adc_clk", "adc_sel";
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_A>;
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_B>;
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_C>;
+};
+
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
+&spicc {
+	clocks = <&clkc CLKID_SPICC>;
+	clock-names = "core";
+	resets = <&reset RESET_PERIPHS_SPICC>;
+	num-cs = <1>;
+};
+
+&spifc {
+	clocks = <&clkc CLKID_SPI>;
+};
+
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+};
+
+&vdec {
+	compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
+	clocks = <&clkc CLKID_DOS_PARSER>,
+		 <&clkc CLKID_DOS>,
+		 <&clkc CLKID_VDEC_1>,
+		 <&clkc CLKID_VDEC_HEVC>;
+	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+	resets = <&reset RESET_PARSER>;
+	reset-names = "esparser";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
new file mode 100644
index 0000000000..2c267884cc
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Beelink GT1 Ultimate";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
new file mode 100644
index 0000000000..860f307494
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Khadas VIM2";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial2 = &uart_AO_B;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
+			 &gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
+		/* Dummy RPM values since fan is optional */
+		gpio-fan,speed-map =
+				<0 0>,
+				<1 1>,
+				<2 2>,
+				<3 3>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "vim:red:power";
+			pwms = <&pwm_AO_ab 1 7812500 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KHADAS-VIM2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
+	};
+
+	map1 {
+		cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+				 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		status = "okay";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-khadas";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/*
+ * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe
+ * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q32: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q16", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+/* This one is connected to the Bluetooth module */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
new file mode 100644
index 0000000000..f5b3424c0f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "videostrong,gxm-kiii-pro", "amlogic,s912", "amlogic,meson-gxm";
+	model = "MeCool KIII Pro";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0xC0000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-mecool-kiii-pro";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
new file mode 100644
index 0000000000..1703da3235
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "minix,neo-u9h", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Minix Neo U9-H";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-minix-neo";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		status = "okay";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		wakeup-source;
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
new file mode 100644
index 0000000000..7d525bdb0e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "nexbox,a1", "amlogic,s912", "amlogic,meson-gxm";
+	model = "NEXBOX A1";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "NEXBOX-A1";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
new file mode 100644
index 0000000000..d4858afa0e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Amlogic Meson GXM (S912) Q200 Development Board";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Q200 has exclusive choice between internal or external PHY */
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		/* External PHY reset is shared with internal PHY Led signal */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
new file mode 100644
index 0000000000..d02b80d773
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,q201", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Amlogic Meson GXM (S912) Q201 Development Board";
+};
+
+/* Q201 has only internal PHY port */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
new file mode 100644
index 0000000000..50d49aec41
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * Based on nexbox-a1:
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";
+	model = "R-Box Pro";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "rbox-pro:blue:on";
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-red {
+			label = "rbox-pro:red:standby";
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "RBOX-PRO";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: brcmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
new file mode 100644
index 0000000000..4eda9f634c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s912-pc", "amlogic,s912",
+		     "amlogic,meson-gxm";
+	model = "Libre Computer AML-S912-PC";
+
+	typec2_vbus: regulator-typec2_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "TYPEC2_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v>;
+
+		gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the irq pin of the TYPE C controller is not driven
+	 * by the SoC.
+	 */
+	fusb302_irq_pins: fusb302_irq {
+		mux {
+			groups = "GPIODV_0";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&i2c_C {
+	fusb302@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		pinctrl-0 = <&fusb302_irq_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+		vbus-supply = <&typec2_vbus>;
+
+		status = "okay";
+
+		connector {
+			compatible = "usb-c-connector";
+		};
+	};
+};
+
+&usb2_phy2 {
+	phy-supply = <&typec2_vbus>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
new file mode 100644
index 0000000000..d3fdba4da9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2017 Oleg <balbes-150@yandex.ru>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s96", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Tronsmart Vega S96";
+
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-vega-s9x";
+};
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
new file mode 100644
index 0000000000..f8c40340b9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
+	model = "WeTek Core 2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-update {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Disabled as Realtek RTL8152 USB provides Ethernet */
+&ethmac {
+	status = "disabled";
+};
+
+&internal_phy {
+	status = "disabled";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-play2";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
new file mode 100644
index 0000000000..411cc312fc
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gxl.dtsi"
+
+/ {
+	compatible = "amlogic,meson-gxm";
+
+	cpus {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu1: cpu@1 {
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu2: cpu@2 {
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu3: cpu@3 {
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	usb2_phy2: phy@78040 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78040 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxm-mali", "arm,mali-t820";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&clkc CLKID_MALI>;
+		resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
+		operating-points-v2 = <&gpu_opp_table>;
+	};
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
+};
+
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+
+	map1 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
+};
+
+&scpi_dvfs {
+	clock-indices = <0 1>;
+	clock-output-names = "vbig", "vlittle";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+};
+
+&usb {
+	compatible = "amlogic,meson-gxm-usb-ctrl";
+
+	phy-names = "usb2-phy0", "usb2-phy1", "usb2-phy2";
+	phys = <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
+};
+
+&vdec {
+	compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
new file mode 100644
index 0000000000..514a6dd4b1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "KHADAS-VIM3";
+		audio-aux-devs = <&tdmin_a>, <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-7 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	khadas_mcu: system-controller@18 {
+		compatible = "khadas,mcu";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	gpio_expander: gpio-controller@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		vcc-supply = <&vcc_3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-khadas";
+};
+
+&pcie {
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vsys_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q128: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128fw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
new file mode 100644
index 0000000000..8ffbcb2b1a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-s4.dtsi"
+
+/ {
+	model = "Amlogic Meson S4 AQ222 Development Board";
+	compatible = "amlogic,aq222", "amlogic,s4";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_B;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+};
+
+&uart_B {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
new file mode 100644
index 0000000000..f24460186d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson-s4-pwrc";
+		#power-domain-cells = <1>;
+		status = "okay";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,meson-s4-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@4000 {
+					reg = <0x0 0x4000 0x0 0x004c>,
+					      <0x0 0x40c0 0x0 0x0220>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 82>;
+				};
+			};
+
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,meson-s4-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x20>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
+			uart_B: serial@7a000 {
+				compatible = "amlogic,meson-s4-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+			reset: reset-controller@2000 {
+				compatible = "amlogic,meson-s4-reset";
+				reg = <0x0 0x2000 0x0 0x98>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
new file mode 100644
index 0000000000..9b2eb6e426
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "cyx,a95xf3-air-gbit", "amlogic,sm1";
+	model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "A95XF3-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
new file mode 100644
index 0000000000..6e34fd80ed
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "cyx,a95xf3-air", "amlogic,sm1";
+	model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "A95XF3-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
new file mode 100644
index 0000000000..46a34731f7
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ *
+ * AC200/AC202 = S905D3
+ * AC213/AC214 = S905X3
+ *
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD Card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	/* CRC errors are observed at 50MHz */
+	max-frequency = <35000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
new file mode 100644
index 0000000000..586034316e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-bananapi.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "bananapi,bpi-m2-pro", "amlogic,sm1";
+	model = "Banana Pi BPI-M2-PRO";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-M2-PRO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
new file mode 100644
index 0000000000..f045bf8516
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-bananapi.dtsi"
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "bananapi,bpi-m5", "amlogic,sm1";
+	model = "Banana Pi BPI-M5";
+
+	/* TOFIX: handle CVBS_DET on SARADC channel 0 */
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-M5";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_b>, <&tdmout_c>,
+				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"Lineout", "ACODEC LOLP",
+				"Lineout", "ACODEC LORP";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		/* i2s jack output interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-8 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		/* acodec glue */
+		dai-link-9 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddao_1v8>;
+	status = "okay";
+};
+
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
new file mode 100644
index 0000000000..62404743e6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-sw3 {
+			label = "SW3";
+			linux,code = <BTN_3>;
+			press-threshold-microvolt = <1700000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "SW1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddio_c: regulator-vddio_c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
+		gpios-states = <1>;
+
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* USB Hub Power Enable */
+	vl_pwr_en: regulator-vl_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "VL_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"ETH_MDIO", /* GPIOZ_0 */
+		"ETH_MDC", /* GPIOZ_1 */
+		"ETH_RXCLK", /* GPIOZ_2 */
+		"ETH_RX_DV", /* GPIOZ_3 */
+		"ETH_RXD0", /* GPIOZ_4 */
+		"ETH_RXD1", /* GPIOZ_5 */
+		"ETH_RXD2", /* GPIOZ_6 */
+		"ETH_RXD3", /* GPIOZ_7 */
+		"ETH_TXCLK", /* GPIOZ_8 */
+		"ETH_TXEN", /* GPIOZ_9 */
+		"ETH_TXD0", /* GPIOZ_10 */
+		"ETH_TXD1", /* GPIOZ_11 */
+		"ETH_TXD2", /* GPIOZ_12 */
+		"ETH_TXD3", /* GPIOZ_13 */
+		"ETH_INTR", /* GPIOZ_14 */
+		"ETH_NRST", /* GPIOZ_15 */
+		/* GPIOH */
+		"HDMI_SDA", /* GPIOH_0 */
+		"HDMI_SCL", /* GPIOH_1 */
+		"HDMI_HPD", /* GPIOH_2 */
+		"HDMI_CEC", /* GPIOH_3 */
+		"VL-RST_N", /* GPIOH_4 */
+		"CON1-P36", /* GPIOH_5 */
+		"VL-PWREN", /* GPIOH_6 */
+		"WiFi_3V3_1V8", /* GPIOH_7 */
+		"TFLASH_VDD_EN", /* GPIOH_8 */
+		/* BOOT */
+		"eMMC_D0", /* BOOT_0 */
+		"eMMC_D1", /* BOOT_1 */
+		"eMMC_D2", /* BOOT_2 */
+		"eMMC_D3", /* BOOT_3 */
+		"eMMC_D4", /* BOOT_4 */
+		"eMMC_D5", /* BOOT_5 */
+		"eMMC_D6", /* BOOT_6 */
+		"eMMC_D7", /* BOOT_7 */
+		"eMMC_CLK", /* BOOT_8 */
+		"",
+		"eMMC_CMD", /* BOOT_10 */
+		"",
+		"eMMC_RST#", /* BOOT_12 */
+		"eMMC_DS", /* BOOT_13 */
+		"", "",
+		/* GPIOC */
+		"SD_D0_B", /* GPIOC_0 */
+		"SD_D1_B", /* GPIOC_1 */
+		"SD_D2_B", /* GPIOC_2 */
+		"SD_D3_B", /* GPIOC_3 */
+		"SD_CLK_B", /* GPIOC_4 */
+		"SD_CMD_B", /* GPIOC_5 */
+		"CARD_EN_DET", /* GPIOC_6 */
+		"",
+		/* GPIOA */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"CON1-P27", /* GPIOA_14 */
+		"CON1-P28", /* GPIOA_15 */
+		/* GPIOX */
+		"CON1-P16", /* GPIOX_0 */
+		"CON1-P18", /* GPIOX_1 */
+		"CON1-P22", /* GPIOX_2 */
+		"CON1-P11", /* GPIOX_3 */
+		"CON1-P13", /* GPIOX_4 */
+		"CON1-P07", /* GPIOX_5 */
+		"CON1-P33", /* GPIOX_6 */
+		"CON1-P15", /* GPIOX_7 */
+		"CON1-P19", /* GPIOX_8 */
+		"CON1-P21", /* GPIOX_9 */
+		"CON1-P24", /* GPIOX_10 */
+		"CON1-P23", /* GPIOX_11 */
+		"CON1-P08", /* GPIOX_12 */
+		"CON1-P10", /* GPIOX_13 */
+		"CON1-P29", /* GPIOX_14 */
+		"CON1-P31", /* GPIOX_15 */
+		"CON1-P26", /* GPIOX_16 */
+		"CON1-P03", /* GPIOX_17 */
+		"CON1-P05", /* GPIOX_18 */
+		"CON1-P32"; /* GPIOX_19 */
+
+	/*
+	 * WARNING: The USB Hub needs a reset signal to be turned high in
+	 * order to be detected by the USB Controller. This signal should
+	 * be handled by a USB specific power sequence to reset the Hub
+	 * when the USB bus is powered down.
+	 */
+	usb-hub-hog {
+		gpio-hog;
+		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&gpio_ao {
+	gpio-line-names =
+		/* GPIOAO */
+		"DEBUG TX", /* GPIOAO_0 */
+		"DEBUG RX", /* GPIOAO_1 */
+		"SYS_LED2", /* GPIOAO_2 */
+		"UPDATE_KEY", /* GPIOAO_3 */
+		"CON1-P40", /* GPIOAO_4 */
+		"IR_IN", /* GPIOAO_5 */
+		"TF_3V3N_1V8_EN", /* GPIOAO_6 */
+		"CON1-P35", /* GPIOAO_7 */
+		"CON1-P12", /* GPIOAO_8 */
+		"CON1-P37", /* GPIOAO_9 */
+		"CON1-P38", /* GPIOAO_10 */
+		"SYS_LED", /* GPIOAO_11 */
+		/* GPIOE */
+		"VDDEE_PWM", /* GPIOE_0 */
+		"VDDCPU_PWM", /* GPIOE_1 */
+		"TF_PWR_EN"; /* GPIOE_2 */
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&dc_in>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	/* TOFIX: SD card is barely usable in SDR modes */
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&vddio_c>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	/* Enable the hub which is connected to this port */
+	phy-supply = <&vl_pwr_en>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
new file mode 100644
index 0000000000..e6e9410d40
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "haochuangyi,h96-max", "amlogic,sm1";
+	model = "Shenzhen Haochuangyi Technology Co., Ltd H96 Max";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "H96-MAX";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
new file mode 100644
index 0000000000..9c0b544e22
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include "meson-khadas-vim3.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "khadas,vim3l", "amlogic,sm1";
+	model = "Khadas VIM3L";
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		model = "G12B-KHADAS-VIM3L";
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 13", "TDM_A Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
+
+&sd_emmc_a {
+	sd-uhs-sdr50;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
new file mode 100644
index 0000000000..d04768a66b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-odroid.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-c4", "amlogic,sm1";
+	model = "Hardkernel ODROID-C4";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	sound {
+		model = "ODROID-C4";
+	};
+
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb2109,2817";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+
+		/* 3.1 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb2109,817";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-odroid";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
new file mode 100644
index 0000000000..846a2d6c20
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-odroid.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
+	model = "Hardkernel ODROID-HC4";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 120 170 220>;
+		pwms = <&pwm_cd 1 40000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	/* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */
+	p12v_0: regulator-p12v_0 {
+		compatible = "regulator-fixed";
+		regulator-name = "P12V_0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	/* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */
+	p12v_1: regulator-p12v_1 {
+		compatible = "regulator-fixed";
+		regulator-name = "P12V_1";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		model = "ODROID-HC4";
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-odroid";
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		status = "okay";
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&pcie {
+	status = "okay";
+	reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_d_x6_pins>;
+};
+
+&sd_emmc_c {
+	status = "disabled";
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
new file mode 100644
index 0000000000..1db2327bbd
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&main_12v>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the microUSB port power enable */
+		gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOH */
+		"", "", "", "", "",
+		"PIN_36", /* GPIOH_5 */
+		"PIN_26", /* GPIOH_6 */
+		"PIN_32", /* GPIOH_7 */
+		"",
+		/* BOOT */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOC */
+		"", "", "", "", "", "", "", "",
+		/* GPIOA */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"PIN_27", /* GPIOA_14 */
+		"PIN_28", /* GPIOA_15 */
+		/* GPIOX */
+		"PIN_16", /* GPIOX_0 */
+		"PIN_18", /* GPIOX_1 */
+		"PIN_22", /* GPIOX_2 */
+		"PIN_11", /* GPIOX_3 */
+		"PIN_13", /* GPIOX_4 */
+		"PIN_7",  /* GPIOX_5 */
+		"PIN_33", /* GPIOX_6 */
+		"PIN_15", /* GPIOX_7 */
+		"PIN_19", /* GPIOX_8 */
+		"PIN_21", /* GPIOX_9 */
+		"PIN_24", /* GPIOX_10 */
+		"PIN_23", /* GPIOX_11 */
+		"PIN_8",  /* GPIOX_12 */
+		"PIN_10", /* GPIOX_13 */
+		"PIN_29", /* GPIOX_14 */
+		"PIN_31", /* GPIOX_15 */
+		"PIN_12", /* GPIOX_16 */
+		"PIN_3",  /* GPIOX_17 */
+		"PIN_5",  /* GPIOX_18 */
+		"PIN_35"; /* GPIOX_19 */
+};
+
+&gpio_ao {
+	gpio-line-names =
+		/* GPIOAO */
+		"", "", "", "",
+		"PIN_47", /* GPIOAO_4 */
+		"", "",
+		"PIN_45", /* GPIOAO_7 */
+		"PIN_46", /* GPIOAO_8 */
+		"PIN_44", /* GPIOAO_9 */
+		"PIN_42", /* GPIOAO_10 */
+		"",
+		/* GPIOE */
+		"", "", "";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
new file mode 100644
index 0000000000..095579c55f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "seirobotics,sei610", "amlogic,sm1";
+	model = "SEI Robotics SEI610";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	mono_dac: audio-codec-0 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "U16";
+		sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
+	};
+
+	dmics: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			label = "A";
+			linux,code = <BTN_0>;
+			gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key-2 {
+			label = "B";
+			linux,code = <BTN_1>;
+			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key-3 {
+			label = "C";
+			linux,code = <BTN_2>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key-mic-mute {
+			label = "MicMute";
+			linux,code = <SW_MUTE_DEVICE>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key-power {
+			label = "PowerKey";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	led-controller-1 {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "sei610:blue:bt";
+			gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+	};
+
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-2 {
+			label = "sei610:red:power";
+			pwms = <&pwm_AO_ab 0 30518 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			active-low;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	/* Used by Tuner, RGB Led & IR Emitter LED array */
+	vddao_3v3_t: regulator-vddao_3v3_t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SEI610";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
+				 <&tdmin_a>, <&tdmin_b>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* internal speaker interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&mono_dac>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* internal digital mics */
+		dai-link-8 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+/* Exposed via the on-board USB to Serial FT232RL IC */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
new file mode 100644
index 0000000000..fc9b961133
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "amediatech,x96-air-gbit", "amlogic,sm1";
+	model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "X96-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-x96max";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
new file mode 100644
index 0000000000..9ea969255b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "amediatech,x96-air", "amlogic,sm1";
+	model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "X96-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
new file mode 100644
index 0000000000..643f94d9d0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common.dtsi"
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/power/meson-sm1-power.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+/ {
+	compatible = "amlogic,sm1";
+
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <770000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <780000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <790000>;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <810000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <850000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <900000>;
+		};
+
+		opp-1908000000 {
+			opp-hz = /bits/ 64 <1908000000>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	audio: bus@60000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x60000 0x0 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>;
+
+		clkc_audio: clock-controller@0 {
+			status = "disabled";
+			compatible = "amlogic,sm1-audio-clkc";
+			reg = <0x0 0x0 0x0 0xb4>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clocks = <&clkc CLKID_AUDIO>,
+				 <&clkc CLKID_MPLL0>,
+				 <&clkc CLKID_MPLL1>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_MPLL3>,
+				 <&clkc CLKID_HIFI_PLL>,
+				 <&clkc CLKID_FCLK_DIV3>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <&clkc CLKID_FCLK_DIV5>;
+			clock-names = "pclk",
+				      "mst_in0",
+				      "mst_in1",
+				      "mst_in2",
+				      "mst_in3",
+				      "mst_in4",
+				      "mst_in5",
+				      "mst_in6",
+				      "mst_in7";
+
+			resets = <&reset RESET_AUDIO>;
+		};
+
+		toddr_a: audio-controller@100 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x100 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_A";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+			resets = <&arb AXG_ARB_TODDR_A>,
+				 <&clkc_audio AUD_RESET_TODDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <8192>;
+			status = "disabled";
+		};
+
+		toddr_b: audio-controller@140 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x140 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_B";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+			resets = <&arb AXG_ARB_TODDR_B>,
+				 <&clkc_audio AUD_RESET_TODDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		toddr_c: audio-controller@180 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x180 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_C";
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+			resets = <&arb AXG_ARB_TODDR_C>,
+				 <&clkc_audio AUD_RESET_TODDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_a: audio-controller@1c0 {
+			compatible = "amlogic,sm1-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x1c0 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_A";
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+			resets = <&arb AXG_ARB_FRDDR_A>,
+				 <&clkc_audio AUD_RESET_FRDDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
+			status = "disabled";
+		};
+
+		frddr_b: audio-controller@200 {
+			compatible = "amlogic,sm1-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x200 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_B";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+			resets = <&arb AXG_ARB_FRDDR_B>,
+				 <&clkc_audio AUD_RESET_FRDDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_c: audio-controller@240 {
+			compatible = "amlogic,sm1-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x240 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_C";
+			interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+			resets = <&arb AXG_ARB_FRDDR_C>,
+				 <&clkc_audio AUD_RESET_FRDDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		arb: reset-controller@280 {
+			status = "disabled";
+			compatible = "amlogic,meson-sm1-audio-arb";
+			reg = <0x0 0x280 0x0 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+		};
+
+		tdmin_a: audio-controller@300 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x300 0x0 0x40>;
+			sound-name-prefix = "TDMIN_A";
+			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_b: audio-controller@340 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x340 0x0 0x40>;
+			sound-name-prefix = "TDMIN_B";
+			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_c: audio-controller@380 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x380 0x0 0x40>;
+			sound-name-prefix = "TDMIN_C";
+			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_lb: audio-controller@3c0 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x3c0 0x0 0x40>;
+			sound-name-prefix = "TDMIN_LB";
+			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		spdifin: audio-controller@400 {
+			compatible = "amlogic,g12a-spdifin",
+				     "amlogic,axg-spdifin";
+			reg = <0x0 0x400 0x0 0x30>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFIN";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+			<&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+			clock-names = "pclk", "refclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFIN>;
+			status = "disabled";
+		};
+
+		spdifout_a: audio-controller@480 {
+			compatible = "amlogic,g12a-spdifout",
+				     "amlogic,axg-spdifout";
+			reg = <0x0 0x480 0x0 0x50>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFOUT_A";
+			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+			<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+			clock-names = "pclk", "mclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
+			status = "disabled";
+		};
+
+		tdmout_a: audio-controller@500 {
+			compatible = "amlogic,sm1-tdmout";
+			reg = <0x0 0x500 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_A";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_b: audio-controller@540 {
+			compatible = "amlogic,sm1-tdmout";
+			reg = <0x0 0x540 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_B";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_c: audio-controller@580 {
+			compatible = "amlogic,sm1-tdmout";
+			reg = <0x0 0x580 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_C";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		toacodec: audio-controller@740 {
+			compatible = "amlogic,sm1-toacodec",
+				     "amlogic,g12a-toacodec";
+			reg = <0x0 0x740 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOACODEC";
+			resets = <&clkc_audio AUD_RESET_TOACODEC>;
+			status = "disabled";
+		};
+
+		tohdmitx: audio-controller@744 {
+			compatible = "amlogic,sm1-tohdmitx",
+				     "amlogic,g12a-tohdmitx";
+			reg = <0x0 0x744 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOHDMITX";
+			resets = <&clkc_audio AUD_RESET_TOHDMITX>;
+			status = "disabled";
+		};
+
+		toddr_d: audio-controller@840 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x840 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_D";
+			interrupts = <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_D>;
+			resets = <&arb AXG_ARB_TODDR_D>,
+				 <&clkc_audio AUD_RESET_TODDR_D>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_d: audio-controller@880 {
+			 compatible = "amlogic,sm1-frddr",
+				      "amlogic,axg-frddr";
+			reg = <0x0 0x880 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_D";
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_D>;
+			resets = <&arb AXG_ARB_FRDDR_D>,
+				 <&clkc_audio AUD_RESET_FRDDR_D>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+	};
+
+	pdm: audio-controller@61000 {
+		compatible = "amlogic,sm1-pdm",
+			     "amlogic,axg-pdm";
+		reg = <0x0 0x61000 0x0 0x34>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "PDM";
+		clocks = <&clkc_audio AUD_CLKID_PDM>,
+			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
+		status = "disabled";
+	};
+};
+
+&cecb_AO {
+	compatible = "amlogic,meson-sm1-ao-cec";
+};
+
+&clk_msr {
+	compatible = "amlogic,meson-sm1-clk-measure";
+};
+
+
+&clkc {
+	compatible = "amlogic,sm1-clkc";
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ethmac {
+	power-domains = <&pwrc PWRC_SM1_ETH_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-sm1-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+};
+
+&pcie {
+	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
+};
+
+&pmu {
+	compatible = "amlogic,sm1-ddr-pmu";
+};
+
+&pwrc {
+	compatible = "amlogic,meson-sm1-pwrc";
+};
+
+&simplefb_cvbs {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&simplefb_hdmi {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&vdec {
+	compatible = "amlogic,sm1-vdec";
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&usb {
+	power-domains = <&pwrc PWRC_SM1_USB_ID>;
+};
+
+&npu {
+	power-domains = <&pwrc PWRC_SM1_NNA_ID>;
+};
diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile
new file mode 100644
index 0000000000..55b5cdca13
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb
diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts
new file mode 100644
index 0000000000..2e8069002e
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-merlin.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for AppliedMicro (APM) Merlin Board
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ */
+
+/dts-v1/;
+
+/include/ "apm-shadowcat.dtsi"
+
+/ {
+	model = "APM X-Gene Merlin board";
+	compatible = "apm,merlin", "apm,xgene-shadowcat";
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		reg = < 0x1 0x00000000 0x0 0x80000000 >;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		button {
+			label = "POWER";
+			linux,code = <116>;
+			linux,input-type = <0x1>;
+			interrupt-parent = <&sbgpio>;
+			interrupts = <0x0 0x1>;
+		};
+	};
+
+	poweroff_mbox: poweroff_mbox@10548000 {
+		compatible = "syscon";
+		reg = <0x0 0x10548000 0x0 0x30>;
+	};
+
+	poweroff: poweroff@10548010 {
+		compatible = "syscon-poweroff";
+		regmap = <&poweroff_mbox>;
+		offset = <0x10>;
+		mask = <0x1>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&sgenet0 {
+	status = "okay";
+};
+
+&xgenet1 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&i2c4 {
+	rtc68: rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		status = "okay";
+	};
+};
+
+&mdio {
+	sgenet0phy: phy@0 {
+		reg = <0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
new file mode 100644
index 0000000000..033e10e12b
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for AppliedMicro (APM) Mustang Board
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ */
+
+/dts-v1/;
+
+/include/ "apm-storm.dtsi"
+
+/ {
+	model = "APM X-Gene Mustang board";
+	compatible = "apm,mustang", "apm,xgene-storm";
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		button {
+			label = "POWER";
+			linux,code = <116>;
+			linux,input-type = <0x1>;
+			interrupt-parent = <&sbgpio>;
+			interrupts = <0x5 0x1>;
+		};
+	};
+
+	poweroff_mbox: poweroff_mbox@10548000 {
+		compatible = "syscon";
+		reg = <0x0 0x10548000 0x0 0x30>;
+	};
+
+	poweroff: poweroff@10548010 {
+		compatible = "syscon-poweroff";
+		regmap = <&poweroff_mbox>;
+		offset = <0x10>;
+		mask = <0x1>;
+	};
+};
+
+&pcie0clk {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&menet {
+	status = "okay";
+};
+
+&sgenet0 {
+	status = "okay";
+};
+
+&sgenet1 {
+	status = "okay";
+};
+
+&xgenet {
+	status = "okay";
+	rxlos-gpios = <&sbgpio 12 1>;
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&mdio {
+	menet0phy: phy@3 {
+		reg = <0x3>;
+	};
+	sgenet0phy: phy@4 {
+		reg = <0x4>;
+	};
+	sgenet1phy: phy@5 {
+		reg = <0x5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
new file mode 100644
index 0000000000..377660d705
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -0,0 +1,825 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ */
+
+/ {
+	compatible = "apm,xgene-shadowcat";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x300>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x301>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
+		};
+		xgene_L2_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@78090000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-controller;
+		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
+		ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
+		reg = <0x0 0x78090000 0x0 0x10000>,	/* GIC Dist */
+		      <0x0 0x780a0000 0x0 0x20000>,	/* GIC CPU */
+		      <0x0 0x780c0000 0x0 0x10000>,	/* GIC VCPU Control */
+		      <0x0 0x780e0000 0x0 0x20000>;	/* GIC VCPU */
+		v2m0: v2m@0 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x0 0x0 0x1000>;
+		};
+		v2m1: v2m@10000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x10000 0x0 0x1000>;
+		};
+		v2m2: v2m@20000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x20000 0x0 0x1000>;
+		};
+		v2m3: v2m@30000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x30000 0x0 0x1000>;
+		};
+		v2m4: v2m@40000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x40000 0x0 0x1000>;
+		};
+		v2m5: v2m@50000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x50000 0x0 0x1000>;
+		};
+		v2m6: v2m@60000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x60000 0x0 0x1000>;
+		};
+		v2m7: v2m@70000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x70000 0x0 0x1000>;
+		};
+		v2m8: v2m@80000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x80000 0x0 0x1000>;
+		};
+		v2m9: v2m@90000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x90000 0x0 0x1000>;
+		};
+		v2m10: v2m@a0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xa0000 0x0 0x1000>;
+		};
+		v2m11: v2m@b0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xb0000 0x0 0x1000>;
+		};
+		v2m12: v2m@c0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xc0000 0x0 0x1000>;
+		};
+		v2m13: v2m@d0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xd0000 0x0 0x1000>;
+		};
+		v2m14: v2m@e0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xe0000 0x0 0x1000>;
+		};
+		v2m15: v2m@f0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xf0000 0x0 0x1000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 12 0xff04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
+		clock-frequency = <50000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			refclk: refclk {
+				compatible = "fixed-clock";
+				#clock-cells = <1>;
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk";
+			};
+
+			pmdpll: pmdpll@170000f0 {
+				compatible = "apm,xgene-pcppll-v2-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				reg = <0x0 0x170000f0 0x0 0x10>;
+				clock-output-names = "pmdpll";
+			};
+
+			pmd0clk: pmd0clk@7e200200 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200200 0x0 0x10>;
+				clock-output-names = "pmd0clk";
+			};
+
+			pmd1clk: pmd1clk@7e200210 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200210 0x0 0x10>;
+				clock-output-names = "pmd1clk";
+			};
+
+			pmd2clk: pmd2clk@7e200220 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200220 0x0 0x10>;
+				clock-output-names = "pmd2clk";
+			};
+
+			pmd3clk: pmd3clk@7e200230 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200230 0x0 0x10>;
+				clock-output-names = "pmd3clk";
+			};
+
+			socpll: socpll@17000120 {
+				compatible = "apm,xgene-socpll-v2-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				reg = <0x0 0x17000120 0x0 0x1000>;
+				clock-output-names = "socpll";
+			};
+
+			socplldiv2: socplldiv2  {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <1>;
+				clocks = <&socpll 0>;
+				clock-mult = <1>;
+				clock-div = <2>;
+				clock-output-names = "socplldiv2";
+			};
+
+			ahbclk: ahbclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x164>;
+				divider-width = <0x5>;
+				divider-shift = <0x0>;
+				clock-output-names = "ahbclk";
+			};
+
+			sbapbclk: sbapbclk@1704c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&ahbclk 0>;
+				reg = <0x0 0x1704c000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x10>;
+				divider-width = <0x2>;
+				divider-shift = <0x0>;
+				clock-output-names = "sbapbclk";
+			};
+
+			sdioclk: sdioclk@1f2ac000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2ac000 0x0 0x1000
+					0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg", "div-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x2>;
+				enable-offset = <0x8>;
+				enable-mask = <0x2>;
+				divider-offset = <0x178>;
+				divider-width = <0x8>;
+				divider-shift = <0x0>;
+				clock-output-names = "sdioclk";
+			};
+
+			pcie0clk: pcie0clk@1f2bc000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2bc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie0clk";
+			};
+
+			pcie1clk: pcie1clk@1f2cc000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2cc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie1clk";
+			};
+
+			xge0clk: xge0clk@1f61c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f61c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				enable-mask = <0x3>;
+				csr-mask = <0x3>;
+				clock-output-names = "xge0clk";
+			};
+
+			xge1clk: xge1clk@1f62c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f62c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				enable-mask = <0x3>;
+				csr-mask = <0x3>;
+				clock-output-names = "xge1clk";
+			};
+
+			rngpkaclk: rngpkaclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x10>;
+				enable-offset = <0x10>;
+				enable-mask = <0x10>;
+				clock-output-names = "rngpkaclk";
+			};
+
+			i2c4clk: i2c4clk@1704c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&sbapbclk 0>;
+				reg = <0x0 0x1704c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x40>;
+				enable-offset = <0x8>;
+				enable-mask = <0x40>;
+				clock-output-names = "i2c4clk";
+			};
+		};
+
+		scu: system-clk-controller@17000000 {
+			compatible = "apm,xgene-scu","syscon";
+			reg = <0x0 0x17000000 0x0 0x400>;
+		};
+
+		reboot: reboot@17000014 {
+			compatible = "syscon-reboot";
+			regmap = <&scu>;
+			offset = <0x14>;
+			mask = <0x1>;
+		};
+
+		csw: csw@7e200000 {
+			compatible = "apm,xgene-csw", "syscon";
+			reg = <0x0 0x7e200000 0x0 0x1000>;
+		};
+
+		mcba: mcba@7e700000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e700000 0x0 0x1000>;
+		};
+
+		mcbb: mcbb@7e720000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e720000 0x0 0x1000>;
+		};
+
+		efuse: efuse@1054a000 {
+			compatible = "apm,xgene-efuse", "syscon";
+			reg = <0x0 0x1054a000 0x0 0x20>;
+		};
+
+		edac@78800000 {
+			compatible = "apm,xgene-edac";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			regmap-efuse = <&efuse>;
+			reg = <0x0 0x78800000 0x0 0x100>;
+			interrupts = <0x0 0x20 0x4>,
+				     <0x0 0x21 0x4>,
+				     <0x0 0x27 0x4>;
+
+			edacmc@7e800000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e800000 0x0 0x1000>;
+				memory-controller = <0>;
+			};
+
+			edacmc@7e840000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e840000 0x0 0x1000>;
+				memory-controller = <1>;
+			};
+
+			edacmc@7e880000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e880000 0x0 0x1000>;
+				memory-controller = <2>;
+			};
+
+			edacmc@7e8c0000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e8c0000 0x0 0x1000>;
+				memory-controller = <3>;
+			};
+
+			edacpmd@7c000000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c000000 0x0 0x200000>;
+				pmd-controller = <0>;
+			};
+
+			edacpmd@7c200000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c200000 0x0 0x200000>;
+				pmd-controller = <1>;
+			};
+
+			edacpmd@7c400000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c400000 0x0 0x200000>;
+				pmd-controller = <2>;
+			};
+
+			edacpmd@7c600000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c600000 0x0 0x200000>;
+				pmd-controller = <3>;
+			};
+
+			edacl3@7e600000 {
+				compatible = "apm,xgene-edac-l3-v2";
+				reg = <0x0 0x7e600000 0x0 0x1000>;
+			};
+
+			edacsoc@7e930000 {
+				compatible = "apm,xgene-edac-soc";
+				reg = <0x0 0x7e930000 0x0 0x1000>;
+			};
+		};
+
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0x8000>;
+			#mbox-cells = <1>;
+			interrupts =   <0x0 0x0 0x4
+					0x0 0x1 0x4
+					0x0 0x2 0x4
+					0x0 0x3 0x4
+					0x0 0x4 0x4
+					0x0 0x5 0x4
+					0x0 0x6 0x4
+					0x0 0x7 0x4>;
+		};
+
+		i2cslimpro {
+			compatible = "apm,xgene-slimpro-i2c";
+			mboxes = <&mailbox 0>;
+		};
+
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
+		serial0: serial@10600000 {
+			compatible = "ns16550";
+			reg = <0 0x10600000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4c 0x4>;
+		};
+
+		/* Node-name might need to be coded as dwusb for backward compatibility */
+		usb0: usb@19000000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x19000000 0x0 0x100000>;
+			interrupts = <0x0 0x5d 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		pcie0: pcie@1f2b0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+				0xc0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xc0 0x10000000 0x00 0x00010000   /* io */
+				  0x02000000 0x00 0x20000000 0xc1 0x20000000 0x00 0x20000000   /* mem */
+				  0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x4>;
+			dma-coherent;
+			clocks = <&pcie0clk 0>;
+			msi-parent = <&v2m0>;
+		};
+
+		pcie1: pcie@1f2c0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2c0000 0x0 0x00010000   /* Controller registers */
+				0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xa0 0x10000000 0x00 0x00010000   /* io */
+				  0x02000000 0x00 0x20000000 0xa1 0x20000000 0x00 0x20000000   /* mem */
+				  0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x4>;
+			dma-coherent;
+			clocks = <&pcie1clk 0>;
+			msi-parent = <&v2m0>;
+		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci-v2";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f200000 0x0 0x1000>,
+			      <0x0 0x1f20d000 0x0 0x1000>,
+			      <0x0 0x1f20e000 0x0 0x1000>;
+			interrupts = <0x0 0x5a 0x4>;
+			dma-coherent;
+		};
+
+		sata2: sata@1a200000 {
+			compatible = "apm,xgene-ahci-v2";
+			reg = <0x0 0x1a200000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x1000>,
+			      <0x0 0x1f21d000 0x0 0x1000>,
+			      <0x0 0x1f21e000 0x0 0x1000>;
+			interrupts = <0x0 0x5b 0x4>;
+			dma-coherent;
+		};
+
+		sata3: sata@1a400000 {
+			compatible = "apm,xgene-ahci-v2";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>;
+			interrupts = <0x0 0x5c 0x4>;
+			dma-coherent;
+		};
+
+		mmc0: mmc@1c000000 {
+			compatible = "arasan,sdhci-4.9a";
+			reg = <0x0 0x1c000000 0x0 0x100>;
+			interrupts = <0x0 0x49 0x4>;
+			dma-coherent;
+			no-1-8-v;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&sdioclk 0>, <&ahbclk 0>;
+		};
+
+		gfcgpio: gpio@1f63c000 {
+			compatible = "apm,xgene-gpio";
+			reg = <0x0 0x1f63c000 0x0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dwgpio: gpio@1c024000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x1c024000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+			};
+		};
+
+		sbgpio: gpio@17001000{
+			compatible = "apm,xgene-gpio-sb";
+			reg = <0x0 0x17001000 0x0 0x400>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <0x0 0x28 0x1>,
+				     <0x0 0x29 0x1>,
+				     <0x0 0x2a 0x1>,
+				     <0x0 0x2b 0x1>,
+				     <0x0 0x2c 0x1>,
+				     <0x0 0x2d 0x1>,
+				     <0x0 0x2e 0x1>,
+				     <0x0 0x2f 0x1>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			apm,nr-gpios = <22>;
+			apm,nr-irqs = <8>;
+			apm,irq-start = <8>;
+		};
+
+		mdio: mdio@1f610000 {
+			compatible = "apm,xgene-mdio-xfi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1f610000 0x0 0xd100>;
+			clocks = <&xge0clk 0>;
+		};
+
+		sgenet0: ethernet@1f610000 {
+			compatible = "apm,xgene2-sgenet";
+			status = "disabled";
+			reg = <0x0 0x1f610000 0x0 0xd100>,
+			      <0x0 0x1f600000 0x0 0xd100>,
+			      <0x0 0x20000000 0x0 0x20000>;
+			interrupts = <0 96 4>,
+				     <0 97 4>;
+			dma-coherent;
+			clocks = <&xge0clk 0>;
+			local-mac-address = [00 01 73 00 00 01];
+			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet0phy>;
+		};
+
+		xgenet1: ethernet@1f620000 {
+			compatible = "apm,xgene2-xgenet";
+			status = "disabled";
+			reg = <0x0 0x1f620000 0x0 0x10000>,
+			      <0x0 0x1f600000 0x0 0xd100>,
+			      <0x0 0x20000000 0x0 0x220000>;
+			interrupts = <0 108 4>,
+				     <0 109 4>,
+				     <0 110 4>,
+				     <0 111 4>,
+				     <0 112 4>,
+				     <0 113 4>,
+				     <0 114 4>,
+				     <0 115 4>;
+			channel = <12>;
+			port-id = <1>;
+			dma-coherent;
+			clocks = <&xge1clk 0>;
+			local-mac-address = [00 01 73 00 00 02];
+			phy-connection-type = "xgmii";
+		};
+
+		rng: rng@10520000 {
+			compatible = "apm,xgene-rng";
+			reg = <0x0 0x10520000 0x0 0x100>;
+			interrupts = <0x0 0x41 0x4>;
+			clocks = <&rngpkaclk 0>;
+		};
+
+		i2c1: i2c@10511000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10511000 0x0 0x1000>;
+			interrupts = <0 0x45 0x4>;
+			#clock-cells = <1>;
+			clocks = <&sbapbclk 0>;
+			bus_num = <1>;
+		};
+
+		i2c4: i2c@10640000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10640000 0x0 0x1000>;
+			interrupts = <0 0x3a 0x4>;
+			clocks = <&i2c4clk 0>;
+			bus_num = <4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
new file mode 100644
index 0000000000..efa79209f4
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -0,0 +1,1102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for AppliedMicro (APM) X-Gene Storm SOC
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ */
+
+/ {
+	compatible = "apm,xgene-storm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x300>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x301>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+		};
+		xgene_L2_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@78010000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x78010000 0x0 0x1000>,	/* GIC Dist */
+		      <0x0 0x78020000 0x0 0x1000>,	/* GIC CPU */
+		      <0x0 0x78040000 0x0 0x2000>,	/* GIC VCPU Control */
+		      <0x0 0x78060000 0x0 0x2000>;	/* GIC VCPU */
+		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
+		clock-frequency = <50000000>;
+	};
+
+	pmu {
+		compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+		interrupts = <1 12 0xff04>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x400 0x0>;
+
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			refclk: refclk {
+				compatible = "fixed-clock";
+				#clock-cells = <1>;
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk";
+			};
+
+			pcppll: pcppll@17000100 {
+				compatible = "apm,xgene-pcppll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "pcppll";
+				reg = <0x0 0x17000100 0x0 0x1000>;
+				clock-output-names = "pcppll";
+				type = <0>;
+			};
+
+			socpll: socpll@17000120 {
+				compatible = "apm,xgene-socpll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "socpll";
+				reg = <0x0 0x17000120 0x0 0x1000>;
+				clock-output-names = "socpll";
+				type = <1>;
+			};
+
+			socplldiv2: socplldiv2  {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <1>;
+				clocks = <&socpll 0>;
+				clock-names = "socplldiv2";
+				clock-mult = <1>;
+				clock-div = <2>;
+				clock-output-names = "socplldiv2";
+			};
+
+			ahbclk: ahbclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x164>;
+				divider-width = <0x5>;
+				divider-shift = <0x0>;
+				clock-output-names = "ahbclk";
+			};
+
+			sdioclk: sdioclk@1f2ac000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2ac000 0x0 0x1000
+					0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg", "div-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x2>;
+				enable-offset = <0x8>;
+				enable-mask = <0x2>;
+				divider-offset = <0x178>;
+				divider-width = <0x8>;
+				divider-shift = <0x0>;
+				clock-output-names = "sdioclk";
+			};
+
+			ethclk: ethclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "ethclk";
+				reg = <0x0 0x17000000 0x0 0x1000>;
+				reg-names = "div-reg";
+				divider-offset = <0x238>;
+				divider-width = <0x9>;
+				divider-shift = <0x0>;
+				clock-output-names = "ethclk";
+			};
+
+			menetclk: menetclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&ethclk 0>;
+				reg = <0x0 0x1702c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "menetclk";
+			};
+
+			sge0clk: sge0clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-mask = <0xa>;
+				enable-mask = <0xf>;
+				clock-output-names = "sge0clk";
+			};
+
+			xge0clk: xge0clk@1f61c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f61c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-mask = <0x3>;
+				clock-output-names = "xge0clk";
+			};
+
+			xge1clk: xge1clk@1f62c000 {
+				compatible = "apm,xgene-device-clock";
+				status = "disabled";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f62c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-mask = <0x3>;
+				clock-output-names = "xge1clk";
+			};
+
+			sataphy1clk: sataphy1clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy1clk";
+				status = "disabled";
+				csr-offset = <0x4>;
+				csr-mask = <0x00>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy2clk: sataphy1clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy2clk";
+				status = "okay";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy3clk: sataphy1clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy3clk";
+				status = "okay";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sata01clk: sata01clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata01clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata23clk: sata23clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata23clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata45clk: sata45clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata45clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			rtcclk: rtcclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x2>;
+				enable-offset = <0x10>;
+				enable-mask = <0x2>;
+				clock-output-names = "rtcclk";
+			};
+
+			rngpkaclk: rngpkaclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x10>;
+				enable-offset = <0x10>;
+				enable-mask = <0x10>;
+				clock-output-names = "rngpkaclk";
+			};
+
+			pcie0clk: pcie0clk@1f2bc000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2bc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie0clk";
+			};
+
+			pcie1clk: pcie1clk@1f2cc000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2cc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie1clk";
+			};
+
+			pcie2clk: pcie2clk@1f2dc000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2dc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie2clk";
+			};
+
+			pcie3clk: pcie3clk@1f50c000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f50c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie3clk";
+			};
+
+			pcie4clk: pcie4clk@1f51c000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f51c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie4clk";
+			};
+
+			dmaclk: dmaclk@1f27c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f27c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "dmaclk";
+			};
+		};
+
+		msi: msi@79000000 {
+			compatible = "apm,xgene1-msi";
+			msi-controller;
+			reg = <0x00 0x79000000 0x0 0x900000>;
+			interrupts = <  0x0 0x10 0x4
+					0x0 0x11 0x4
+					0x0 0x12 0x4
+					0x0 0x13 0x4
+					0x0 0x14 0x4
+					0x0 0x15 0x4
+					0x0 0x16 0x4
+					0x0 0x17 0x4
+					0x0 0x18 0x4
+					0x0 0x19 0x4
+					0x0 0x1a 0x4
+					0x0 0x1b 0x4
+					0x0 0x1c 0x4
+					0x0 0x1d 0x4
+					0x0 0x1e 0x4
+					0x0 0x1f 0x4>;
+		};
+
+		scu: system-clk-controller@17000000 {
+			compatible = "apm,xgene-scu","syscon";
+			reg = <0x0 0x17000000 0x0 0x400>;
+		};
+
+		reboot: reboot@17000014 {
+			compatible = "syscon-reboot";
+			regmap = <&scu>;
+			offset = <0x14>;
+			mask = <0x1>;
+		};
+
+		csw: csw@7e200000 {
+			compatible = "apm,xgene-csw", "syscon";
+			reg = <0x0 0x7e200000 0x0 0x1000>;
+		};
+
+		mcba: mcba@7e700000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e700000 0x0 0x1000>;
+		};
+
+		mcbb: mcbb@7e720000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e720000 0x0 0x1000>;
+		};
+
+		efuse: efuse@1054a000 {
+			compatible = "apm,xgene-efuse", "syscon";
+			reg = <0x0 0x1054a000 0x0 0x20>;
+		};
+
+		rb: rb@7e000000 {
+			compatible = "apm,xgene-rb", "syscon";
+			reg = <0x0 0x7e000000 0x0 0x10>;
+		};
+
+		edac@78800000 {
+			compatible = "apm,xgene-edac";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			regmap-efuse = <&efuse>;
+			regmap-rb = <&rb>;
+			reg = <0x0 0x78800000 0x0 0x100>;
+			interrupts = <0x0 0x20 0x4>,
+				     <0x0 0x21 0x4>,
+				     <0x0 0x27 0x4>;
+
+			edacmc@7e800000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e800000 0x0 0x1000>;
+				memory-controller = <0>;
+			};
+
+			edacmc@7e840000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e840000 0x0 0x1000>;
+				memory-controller = <1>;
+			};
+
+			edacmc@7e880000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e880000 0x0 0x1000>;
+				memory-controller = <2>;
+			};
+
+			edacmc@7e8c0000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e8c0000 0x0 0x1000>;
+				memory-controller = <3>;
+			};
+
+			edacpmd@7c000000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c000000 0x0 0x200000>;
+				pmd-controller = <0>;
+			};
+
+			edacpmd@7c200000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c200000 0x0 0x200000>;
+				pmd-controller = <1>;
+			};
+
+			edacpmd@7c400000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c400000 0x0 0x200000>;
+				pmd-controller = <2>;
+			};
+
+			edacpmd@7c600000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c600000 0x0 0x200000>;
+				pmd-controller = <3>;
+			};
+
+			edacl3@7e600000 {
+				compatible = "apm,xgene-edac-l3";
+				reg = <0x0 0x7e600000 0x0 0x1000>;
+			};
+
+			edacsoc@7e930000 {
+				compatible = "apm,xgene-edac-soc-v1";
+				reg = <0x0 0x7e930000 0x0 0x1000>;
+			};
+		};
+
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
+		pcie0: pcie@1f2b0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+				0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
+				  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0xf0 0x00000000 0xf0 0x00000000 0x10 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x4>;
+			dma-coherent;
+			clocks = <&pcie0clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		pcie1: pcie@1f2c0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2c0000 0x0 0x00010000   /* Controller registers */
+				0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xd0 0x10000000 0x00 0x00010000   /* io  */
+				  0x02000000 0x00 0x80000000 0xd1 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0xd8 0x00000000 0xd8 0x00000000 0x08 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x4>;
+			dma-coherent;
+			clocks = <&pcie1clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		pcie2: pcie@1f2d0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg =  < 0x00 0x1f2d0000 0x0 0x00010000   /* Controller registers */
+				 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0x90 0x10000000 0x00 0x00010000   /* io  */
+				  0x02000000 0x00 0x80000000 0x91 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x4>;
+			dma-coherent;
+			clocks = <&pcie2clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		pcie3: pcie@1f500000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f500000 0x0 0x00010000   /* Controller registers */
+				0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xa0 0x10000000 0x00 0x00010000   /* io  */
+				  0x02000000 0x00 0x80000000 0xa1 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x4>;
+			dma-coherent;
+			clocks = <&pcie3clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		pcie4: pcie@1f510000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f510000 0x0 0x00010000   /* Controller registers */
+				0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xc0 0x10000000 0x00 0x00010000   /* io  */
+				  0x02000000 0x00 0x80000000 0xc1 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0xc8 0x00000000 0xc8 0x00000000 0x08 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x4>;
+			dma-coherent;
+			clocks = <&pcie4clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0xa000>;
+			#mbox-cells = <1>;
+			interrupts =    <0x0 0x0 0x4>,
+					<0x0 0x1 0x4>,
+					<0x0 0x2 0x4>,
+					<0x0 0x3 0x4>,
+					<0x0 0x4 0x4>,
+					<0x0 0x5 0x4>,
+					<0x0 0x6 0x4>,
+					<0x0 0x7 0x4>;
+		};
+
+		i2cslimpro {
+			compatible = "apm,xgene-slimpro-i2c";
+			mboxes = <&mailbox 0>;
+		};
+
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
+		serial0: serial@1c020000 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1c020000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4c 0x4>;
+		};
+
+		serial1: serial@1c021000 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1c021000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4d 0x4>;
+		};
+
+		serial2: serial@1c022000 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1c022000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4e 0x4>;
+		};
+
+		serial3: serial@1c023000 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1c023000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4f 0x4>;
+		};
+
+		mmc0: mmc@1c000000 {
+			compatible = "arasan,sdhci-4.9a";
+			reg = <0x0 0x1c000000 0x0 0x100>;
+			interrupts = <0x0 0x49 0x4>;
+			dma-coherent;
+			no-1-8-v;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&sdioclk 0>, <&ahbclk 0>;
+		};
+
+		gfcgpio: gpio0@1701c000 {
+			compatible = "apm,xgene-gpio";
+			reg = <0x0 0x1701c000 0x0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dwgpio: gpio@1c024000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x1c024000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+			};
+		};
+
+		i2c0: i2c@10512000 {
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10512000 0x0 0x1000>;
+			interrupts = <0 0x44 0x4>;
+			#clock-cells = <1>;
+			clocks = <&ahbclk 0>;
+			bus_num = <0>;
+		};
+
+		phy1: phy@1f21a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f21a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy1clk 0>;
+			status = "disabled";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy2clk 0>;
+			status = "okay";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <1 10 10 2 10 10>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy3clk 0>;
+			status = "okay";
+			apm,tx-boost-gain = <31 31 31 31 31 31>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x1000>,
+			      <0x0 0x1f21d000 0x0 0x1000>,
+			      <0x0 0x1f21e000 0x0 0x1000>,
+			      <0x0 0x1f217000 0x0 0x1000>;
+			interrupts = <0x0 0x86 0x4>;
+			dma-coherent;
+			status = "disabled";
+			clocks = <&sata01clk 0>;
+			phys = <&phy1 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>,
+			      <0x0 0x1f227000 0x0 0x1000>;
+			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
+			status = "okay";
+			clocks = <&sata23clk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x1000>,
+			      <0x0 0x1f23d000 0x0 0x1000>,
+			      <0x0 0x1f23e000 0x0 0x1000>;
+			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
+			status = "okay";
+			clocks = <&sata45clk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-phy";
+		};
+
+		/* Node-name might need to be coded as dwusb for backward compatibility */
+		usb0: usb@19000000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x19000000 0x0 0x100000>;
+			interrupts = <0x0 0x89 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		usb1: usb@19800000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x19800000 0x0 0x100000>;
+			interrupts = <0x0 0x8a 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		sbgpio: gpio@17001000{
+			compatible = "apm,xgene-gpio-sb";
+			reg = <0x0 0x17001000 0x0 0x400>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = 	<0x0 0x28 0x1>,
+					<0x0 0x29 0x1>,
+					<0x0 0x2a 0x1>,
+					<0x0 0x2b 0x1>,
+					<0x0 0x2c 0x1>,
+					<0x0 0x2d 0x1>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		rtc: rtc@10510000 {
+			compatible = "apm,xgene-rtc";
+			reg = <0x0 0x10510000 0x0 0x400>;
+			interrupts = <0x0 0x46 0x4>;
+			#clock-cells = <1>;
+			clocks = <&rtcclk 0>;
+		};
+
+		mdio: mdio@17020000 {
+			compatible = "apm,xgene-mdio-rgmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x17020000 0x0 0xd100>;
+			clocks = <&menetclk 0>;
+		};
+
+		menet: ethernet@17020000 {
+			compatible = "apm,xgene-enet";
+			status = "disabled";
+			reg = <0x0 0x17020000 0x0 0xd100>,
+			      <0x0 0x17030000 0x0 0xc300>,
+			      <0x0 0x10000000 0x0 0x200>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0x3c 0x4>;
+			dma-coherent;
+			clocks = <&menetclk 0>;
+			/* mac address will be overwritten by the bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "rgmii";
+			phy-handle = <&menetphy>,<&menet0phy>;
+			mdio {
+				compatible = "apm,xgene-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				menetphy: menetphy@3 {
+					compatible = "ethernet-phy-id001c.c915";
+					reg = <0x3>;
+				};
+
+			};
+		};
+
+		sgenet0: ethernet@1f210000 {
+			compatible = "apm,xgene1-sgenet";
+			status = "disabled";
+			reg = <0x0 0x1f210000 0x0 0xd100>,
+			      <0x0 0x1f200000 0x0 0xc300>,
+			      <0x0 0x1b000000 0x0 0x200>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0xa0 0x4>,
+				     <0x0 0xa1 0x4>;
+			dma-coherent;
+			clocks = <&sge0clk 0>;
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet0phy>;
+		};
+
+		sgenet1: ethernet@1f210030 {
+			compatible = "apm,xgene1-sgenet";
+			status = "disabled";
+			reg = <0x0 0x1f210030 0x0 0xd100>,
+			      <0x0 0x1f200000 0x0 0xc300>,
+			      <0x0 0x1b000000 0x0 0x8000>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0xac 0x4>,
+				     <0x0 0xad 0x4>;
+			port-id = <1>;
+			dma-coherent;
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet1phy>;
+		};
+
+		xgenet: ethernet@1f610000 {
+			compatible = "apm,xgene1-xgenet";
+			status = "disabled";
+			reg = <0x0 0x1f610000 0x0 0xd100>,
+			      <0x0 0x1f600000 0x0 0xc300>,
+			      <0x0 0x18000000 0x0 0x200>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0x60 0x4>,
+				     <0x0 0x61 0x4>,
+				     <0x0 0x62 0x4>,
+				     <0x0 0x63 0x4>,
+				     <0x0 0x64 0x4>,
+				     <0x0 0x65 0x4>,
+				     <0x0 0x66 0x4>,
+				     <0x0 0x67 0x4>;
+			channel = <0>;
+			dma-coherent;
+			clocks = <&xge0clk 0>;
+			/* mac address will be overwritten by the bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "xgmii";
+		};
+
+		xgenet1: ethernet@1f620000 {
+			compatible = "apm,xgene1-xgenet";
+			status = "disabled";
+			reg = <0x0 0x1f620000 0x0 0xd100>,
+			      <0x0 0x1f600000 0x0 0xc300>,
+			      <0x0 0x18000000 0x0 0x8000>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0x6c 0x4>,
+				     <0x0 0x6d 0x4>;
+			port-id = <1>;
+			dma-coherent;
+			clocks = <&xge1clk 0>;
+			/* mac address will be overwritten by the bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "xgmii";
+		};
+
+		rng: rng@10520000 {
+			compatible = "apm,xgene-rng";
+			reg = <0x0 0x10520000 0x0 0x100>;
+			interrupts = <0x0 0x41 0x4>;
+			clocks = <&rngpkaclk 0>;
+		};
+
+		dma: dma@1f270000 {
+			compatible = "apm,xgene-storm-dma";
+			device_type = "dma";
+			reg = <0x0 0x1f270000 0x0 0x10000>,
+			      <0x0 0x1f200000 0x0 0x10000>,
+			      <0x0 0x1b000000 0x0 0x400000>,
+			      <0x0 0x1054a000 0x0 0x100>;
+			interrupts = <0x0 0x82 0x4>,
+				     <0x0 0xb8 0x4>,
+				     <0x0 0xb9 0x4>,
+				     <0x0 0xba 0x4>,
+				     <0x0 0xbb 0x4>;
+			dma-coherent;
+			clocks = <&dmaclk 0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
new file mode 100644
index 0000000000..aec5e29cdf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j293.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j313.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j456.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j457.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6000-j314s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j314c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
diff --git a/arch/arm64/boot/dts/apple/multi-die-cpp.h b/arch/arm64/boot/dts/apple/multi-die-cpp.h
new file mode 100644
index 0000000000..39e8953bf8
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/multi-die-cpp.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT
+ *
+ * C preprocessor macros for t600x multi die support.
+ */
+
+#ifndef __DTS_APPLE_MULTI_DIE_CPP_H
+#define __DTS_APPLE_MULTI_DIE_CPP_H
+
+#ifndef __stringify
+#define __stringify_1(x...)     #x
+#define __stringify(x...)       __stringify_1(x)
+#endif
+
+#ifndef __concat
+#define __concat_1(x, y...)     x ## y
+#define __concat(x, y...)       __concat_1(x, y)
+#endif
+
+#define DIE_NODE(a) __concat(a, DIE)
+#define DIE_LABEL(a) __stringify(__concat(a, DIE))
+
+#endif /* !__DTS_APPLE_MULTI_DIE_CPP_H */
diff --git a/arch/arm64/boot/dts/apple/t6000-j314s.dts b/arch/arm64/boot/dts/apple/t6000-j314s.dts
new file mode 100644
index 0000000000..c9e192848f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000-j314s.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Pro, 2021)
+ *
+ * target-type: J314s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j316s.dts b/arch/arm64/boot/dts/apple/t6000-j316s.dts
new file mode 100644
index 0000000000..ff1803ce23
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000-j316s.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Pro, 2021)
+ *
+ * target-type: J316s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000.dtsi b/arch/arm64/boot/dts/apple/t6000.dtsi
new file mode 100644
index 0000000000..89c3b211b1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6000 "M1 Pro" SoC
+ *
+ * Other names: H13J, "Jade Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6001, so include it and disable the missing parts */
+
+#include "t6001.dtsi"
+
+/ {
+	compatible = "apple,t6000", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
diff --git a/arch/arm64/boot/dts/apple/t6001-j314c.dts b/arch/arm64/boot/dts/apple/t6001-j314c.dts
new file mode 100644
index 0000000000..1761d15b98
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j314c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Max, 2021)
+ *
+ * target-type: J314c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Max, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j316c.dts b/arch/arm64/boot/dts/apple/t6001-j316c.dts
new file mode 100644
index 0000000000..750e9beeff
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j316c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Max, 2021)
+ *
+ * target-type: J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Max, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j375c.dts b/arch/arm64/boot/dts/apple/t6001-j375c.dts
new file mode 100644
index 0000000000..62ea437b58
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j375c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Max, 2022)
+ *
+ * target-type: J375c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375c", "apple,t6001", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Max, 2022)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001.dtsi b/arch/arm64/boot/dts/apple/t6001.dtsi
new file mode 100644
index 0000000000..620b17e403
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6001 "M1 Max" SoC
+ *
+ * Other names: H13J, "Jade"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6001", "apple,arm-platform";
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-gpio-pins.dtsi"
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6002-j375d.dts b/arch/arm64/boot/dts/apple/t6002-j375d.dts
new file mode 100644
index 0000000000..3365429bdc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6002-j375d.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Ultra, 2022)
+ *
+ * target-type: J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6002.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375d", "apple,t6002", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Ultra, 2022)";
+};
+
+/* USB Type C */
+&i2c0 {
+	/* front-right */
+	hpm4: usb-pd@39 {
+		compatible = "apple,cd321x";
+		reg = <0x39>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* front-left */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/* delete unused always-on power-domains on die 1 */
+
+/delete-node/ &ps_atc2_usb_aon_die1;
+/delete-node/ &ps_atc2_usb_die1;
+
+/delete-node/ &ps_atc3_usb_aon_die1;
+/delete-node/ &ps_atc3_usb_die1;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
diff --git a/arch/arm64/boot/dts/apple/t6002.dtsi b/arch/arm64/boot/dts/apple/t6002.dtsi
new file mode 100644
index 0000000000..a963a50117
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6002.dtsi
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6002 "M1 Ultra" SoC
+ *
+ * Other names: H13J, "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6002", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		cpu-map {
+			cluster3 {
+				core0 {
+					cpu = <&cpu_e10>;
+				};
+				core1 {
+					cpu = <&cpu_e11>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu_p20>;
+				};
+				core1 {
+					cpu = <&cpu_p21>;
+				};
+				core2 {
+					cpu = <&cpu_p22>;
+				};
+				core3 {
+					cpu = <&cpu_p23>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu_p30>;
+				};
+				core1 {
+					cpu = <&cpu_p31>;
+				};
+				core2 {
+					cpu = <&cpu_p32>;
+				};
+				core3 {
+					cpu = <&cpu_p33>;
+				};
+			};
+		};
+
+		cpu_e10: cpu@800 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x800>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e11: cpu@801 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x801>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_p20: cpu@10900 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10900>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p21: cpu@10901 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10901>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p22: cpu@10902 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10902>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p23: cpu@10903 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10903>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p30: cpu@10a00 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a00>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p31: cpu@10a01 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a01>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p32: cpu@10a02 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a02>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p33: cpu@10a03 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a03>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		l2_cache_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_4: l2-cache-4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_5: l2-cache-5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	die0: soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x2 0x0 0x4 0x0>,
+			 <0x5 0x80000000 0x5 0x80000000 0x1 0x80000000>,
+			 <0x7 0x0 0x7 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+
+	die1: soc@2200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x22 0x0 0x4 0x0>,
+			 <0x7 0x0 0x27 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+#include "t600x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01
+				&cpu_e10 &cpu_e11>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+				&cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+				&cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+		};
+	};
+};
+
+&ps_gfx {
+	// On t6002, the die0 GPU power domain needs both AFR power domains
+	power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-common.dtsi b/arch/arm64/boot/dts/apple/t600x-common.dtsi
new file mode 100644
index 0000000000..fa8ead6993
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-common.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Apple T6000 / T6001 / T6002 "M1 Pro/Max/Ultra" SoC
+ *
+ * Other names: H13J, "Jade Chop", "Jade", "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e00>;
+				};
+				core1 {
+					cpu = <&cpu_e01>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p00>;
+				};
+				core1 {
+					cpu = <&cpu_p01>;
+				};
+				core2 {
+					cpu = <&cpu_p02>;
+				};
+				core3 {
+					cpu = <&cpu_p03>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu_p10>;
+				};
+				core1 {
+					cpu = <&cpu_p11>;
+				};
+				core2 {
+					cpu = <&cpu_p12>;
+				};
+				core3 {
+					cpu = <&cpu_p13>;
+				};
+			};
+		};
+
+		cpu_e00: cpu@0 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e01: cpu@1 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_p00: cpu@10100 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p01: cpu@10101 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p02: cpu@10102 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p03: cpu@10103 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p10: cpu@10200 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p11: cpu@10201 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p12: cpu@10202 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10202>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p13: cpu@10203 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10203>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	icestorm_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <23000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <29000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <40000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	firestorm_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <18000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <19000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1524000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <6>;
+			clock-latency-ns = <28000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1980000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2448000000>;
+			opp-level = <9>;
+			clock-latency-ns = <49000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2676000000>;
+			opp-level = <10>;
+			clock-latency-ns = <53000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2904000000>;
+			opp-level = <11>;
+			clock-latency-ns = <56000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <3036000000>;
+			opp-level = <12>;
+			clock-latency-ns = <56000>;
+		};
+		/* Not available until CPU deep sleep is implemented
+		opp13 {
+			opp-hz = /bits/ 64 <3132000000>;
+			opp-level = <13>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3168000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3228000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		*/
+	};
+
+	pmu-e {
+		compatible = "apple,icestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,firestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
new file mode 100644
index 0000000000..b1c875e692
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6002 "M1 Ultra" SoC and present on
+ * Apple T6000 / T6001 "M1 Pro" / "M1 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+	nco: clock-controller@28e03c000 {
+		compatible = "apple,t6000-nco", "apple,nco";
+		reg = <0x2 0x8e03c000 0x0 0x14000>;
+		clocks = <&nco_clkref>;
+		#clock-cells = <1>;
+	};
+
+	aic: interrupt-controller@28e100000 {
+		compatible = "apple,t6000-aic", "apple,aic2";
+		#interrupt-cells = <4>;
+		interrupt-controller;
+		reg = <0x2 0x8e100000 0x0 0xc000>,
+			<0x2 0x8e10c000 0x0 0x4>;
+		reg-names = "core", "event";
+		power-domains = <&ps_aic>;
+	};
+
+	pinctrl_smc: pinctrl@290820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x90820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_smc 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 743 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 744 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 745 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 746 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 747 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 748 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 749 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	wdt: watchdog@2922b0000 {
+		compatible = "apple,t6000-wdt", "apple,wdt";
+		reg = <0x2 0x922b0000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 631 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sio_dart_0: iommu@39b004000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b004000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	sio_dart_1: iommu@39b008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b008000 0x0 0x8000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	fpwm0: pwm@39b030000 {
+		compatible = "apple,t6000-fpwm", "apple,s5l-fpwm";
+		reg = <0x3 0x9b030000 0x0 0x4000>;
+		power-domains = <&ps_fpwm0>;
+		clocks = <&clkref>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@39b040000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b040000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1119 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c0_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+	};
+
+	i2c1: i2c@39b044000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b044000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1120 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c1>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@39b048000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b048000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1121 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@39b04c000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b04c000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1122 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c3>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@39b050000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b050000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1123 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c4>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@39b054000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1124 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c5_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c5>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	serial0: serial@39b200000 {
+		compatible = "apple,s5l-uart";
+		reg = <0x3 0x9b200000 0x0 0x1000>;
+		reg-io-width = <4>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1097 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * TODO: figure out the clocking properly, there may
+		 * be a third selectable clock.
+		 */
+		clocks = <&clkref>, <&clkref>;
+		clock-names = "uart", "clk_uart_baud0";
+		power-domains = <&ps_uart0>;
+		status = "disabled";
+	};
+
+	admac: dma-controller@39b400000 {
+		compatible = "apple,t6000-admac", "apple,admac";
+		reg = <0x3 0x9b400000 0x0 0x34000>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+		interrupts-extended = <0>,
+				      <&aic AIC_IRQ 0 1118 IRQ_TYPE_LEVEL_HIGH>,
+				      <0>,
+				      <0>;
+		iommus = <&sio_dart_0 2>, <&sio_dart_1 2>;
+		power-domains = <&ps_sio_adma>;
+		resets = <&ps_audio_p>;
+	};
+
+	mca: mca@39b600000 {
+		compatible = "apple,t6000-mca", "apple,mca";
+		reg = <0x3 0x9b600000 0x0 0x10000>,
+		      <0x3 0x9b500000 0x0 0x20000>;
+		clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+		dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+		       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+		       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+		       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+		dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+			    "tx1a", "rx1a", "tx1b", "rx1b",
+			    "tx2a", "rx2a", "tx2b", "rx2b",
+			    "tx3a", "rx3a", "tx3b", "rx3b";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1112 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1113 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1114 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1115 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+				<&ps_mca2>, <&ps_mca3>;
+		resets = <&ps_audio_p>;
+		#sound-dai-cells = <1>;
+	};
+
+	pcie0_dart_0: iommu@581008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x81008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1271 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_1: iommu@582008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x82008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1274 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_2: iommu@583008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x83008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1277 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_3: iommu@584008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x84008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1280 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0: pcie@590000000 {
+		compatible = "apple,t6000-pcie", "apple,pcie";
+		device_type = "pci";
+
+		reg = <0x5 0x90000000 0x0 0x1000000>,
+			<0x5 0x80000000 0x0 0x100000>,
+			<0x5 0x81000000 0x0 0x4000>,
+			<0x5 0x82000000 0x0 0x4000>,
+			<0x5 0x83000000 0x0 0x4000>,
+			<0x5 0x84000000 0x0 0x4000>;
+		reg-names = "config", "rc", "port0", "port1", "port2", "port3";
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1270 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1273 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1276 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1279 IRQ_TYPE_LEVEL_HIGH>;
+
+		msi-controller;
+		msi-parent = <&pcie0>;
+		msi-ranges = <&aic AIC_IRQ 0 1581 IRQ_TYPE_EDGE_RISING 32>;
+
+
+		iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				<0x200 &pcie0_dart_1 1 1>,
+				<0x300 &pcie0_dart_2 1 1>,
+				<0x400 &pcie0_dart_3 1 1>;
+		iommu-map-mask = <0xff00>;
+
+		bus-range = <0 4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+				<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+		power-domains = <&ps_apcie_gp_sys>;
+		pinctrl-0 = <&pcie_pins>;
+		pinctrl-names = "default";
+
+		port00: pci@0,0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+					<0 0 0 2 &port00 0 0 0 1>,
+					<0 0 0 3 &port00 0 0 0 2>,
+					<0 0 0 4 &port00 0 0 0 3>;
+		};
+
+		port01: pci@1,0 {
+			device_type = "pci";
+			reg = <0x800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+					<0 0 0 2 &port01 0 0 0 1>,
+					<0 0 0 3 &port01 0 0 0 2>,
+					<0 0 0 4 &port01 0 0 0 3>;
+		};
+
+		port02: pci@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+					<0 0 0 2 &port02 0 0 0 1>,
+					<0 0 0 3 &port02 0 0 0 2>,
+					<0 0 0 4 &port02 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port03: pci@3,0 {
+			device_type = "pci";
+			reg = <0x1800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+					<0 0 0 2 &port03 0 0 0 1>,
+					<0 0 0 3 &port03 0 0 0 2>,
+					<0 0 0 4 &port03 0 0 0 3>;
+			status = "disabled";
+		};
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-dieX.dtsi b/arch/arm64/boot/dts/apple/t600x-dieX.dtsi
new file mode 100644
index 0000000000..a32ff0c9d7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-dieX.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on both dies on the Apple T6002 "M1 Ultra" and present on
+ * Apple T6000/T6001 "M1 Pro/Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x10e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x11e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x12e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(pmgr): power-management@28e080000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e080000 0 0x4000>;
+	};
+
+	DIE_NODE(pmgr_east): power-management@28e580000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e580000 0 0xc000>;
+	};
+
+	DIE_NODE(pmgr_south): power-management@28e680000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e680000 0 0xc000>;
+	};
+
+	DIE_NODE(pinctrl_nub): pinctrl@2921f0000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x921f0000 0x0 0x4000>;
+		power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 16>;
+		apple,npins = <16>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 623 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 624 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 625 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 626 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 627 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 628 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 629 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pmgr_mini): power-management@292280000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x92280000 0 0x4000>;
+	};
+
+	DIE_NODE(pinctrl_aop): pinctrl@293820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x93820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 63>;
+		apple,npins = <63>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 567 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 568 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 569 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 570 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 571 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 572 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 573 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x3 0x9b028000 0x0 0x4000>;
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 427 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 428 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 429 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 430 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 431 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 432 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 433 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clkref>;
+		power-domains = <&DIE_NODE(ps_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+		apple,npins = <255>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
new file mode 100644
index 0000000000..b31f1a7a2b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+	i2c0_pins: i2c0-pins {
+		pinmux = <APPLE_PINMUX(92, 1)>,
+			<APPLE_PINMUX(93, 1)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <APPLE_PINMUX(94, 1)>,
+			<APPLE_PINMUX(95, 1)>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinmux = <APPLE_PINMUX(96, 1)>,
+			<APPLE_PINMUX(97, 1)>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pinmux = <APPLE_PINMUX(98, 1)>,
+			<APPLE_PINMUX(99, 1)>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		pinmux = <APPLE_PINMUX(8, 1)>,
+			<APPLE_PINMUX(9, 1)>;
+	};
+
+	i2c5_pins: i2c5-pins {
+		pinmux = <APPLE_PINMUX(100, 1)>,
+			<APPLE_PINMUX(101, 1)>;
+	};
+
+	pcie_pins: pcie-pins {
+		pinmux = <APPLE_PINMUX(0, 1)>,
+				<APPLE_PINMUX(1, 1)>,
+				<APPLE_PINMUX(2, 1)>,
+				<APPLE_PINMUX(3, 1)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
new file mode 100644
index 0000000000..2e471dfe43
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2021)
+ *
+ * This file contains the parts common to J314 and J316 devices with both t6000 and t6001.
+ *
+ * target-type: J314s / J314c / J316s / J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm0 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&fpwm0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
new file mode 100644
index 0000000000..1e5a19e49b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (2022)
+ *
+ * This file contains the parts common to J375 devices with both t6001 and t6002.
+ *
+ * target-type: J375c / J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&port02 {
+	/* 10 Gbit Ethernet */
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&port03 {
+	/* USB xHCI */
+	bus-range = <4 4>;
+	status = "okay";
+};
+
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
+&pcie0_dart_3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-nvme.dtsi b/arch/arm64/boot/dts/apple/t600x-nvme.dtsi
new file mode 100644
index 0000000000..7dff738d31
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(ans_mbox): mbox@38f408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x3 0x8f408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 1069 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1070 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1071 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1072 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		power-domains = <&DIE_NODE(ps_ans2)>;
+		#mbox-cells = <0>;
+	};
+
+	DIE_NODE(sart): sart@393c50000 {
+		compatible = "apple,t6000-sart";
+		reg = <0x3 0x93c50000 0x0 0x10000>;
+		power-domains = <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(nvme): nvme@393cc0000 {
+		compatible = "apple,t6000-nvme-ans2", "apple,nvme-ans2";
+		reg = <0x3 0x93cc0000 0x0 0x40000>, <0x3 0x8f400000 0x0 0x4000>;
+		reg-names = "nvme", "ans";
+		interrupt-parent = <&aic>;
+		/* The NVME interrupt is always routed to die */
+		interrupts = <AIC_IRQ 0 1613 IRQ_TYPE_LEVEL_HIGH>;
+		mboxes = <&DIE_NODE(ans_mbox)>;
+		apple,sart = <&DIE_NODE(sart)>;
+		power-domains = <&DIE_NODE(ps_ans2)>,
+			<&DIE_NODE(ps_apcie_st_sys)>,
+			<&DIE_NODE(ps_apcie_st1_sys)>;
+		power-domain-names = "ans", "apcie0", "apcie1";
+		resets = <&DIE_NODE(ps_ans2)>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi b/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi
new file mode 100644
index 0000000000..0bd44753b7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi
@@ -0,0 +1,2012 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T6001 "M1 Max" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+	DIE_NODE(ps_pms_bridge): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_bridge);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_aic): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aic);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_dwi): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dwi);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pms): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_gpio): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpio);
+		power-domains = <&DIE_NODE(ps_pms)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_soc_dpe): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(soc_dpe);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pmgr_soc_ocla): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmgr_soc_ocla);
+		power-domains = <&DIE_NODE(ps_pms)>;
+	};
+
+	DIE_NODE(ps_pcie0_ref): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie0_ref);
+	};
+
+	DIE_NODE(ps_pcie1_ref): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie1_ref);
+	};
+
+	DIE_NODE(ps_apcie_st): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st);
+		power-domains = <&DIE_NODE(ps_pcie1_ref)>;
+	};
+
+	DIE_NODE(ps_apcie_gp): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp);
+		power-domains = <&DIE_NODE(ps_pcie0_ref)>;
+	};
+
+	DIE_NODE(ps_devc0_ivdmc): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(devc0_ivdmc);
+	};
+
+	DIE_NODE(ps_amcc0): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc0);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc2): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc2);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_00): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_00);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_01): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_01);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_02): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_02);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_03): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_03);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_08): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_08);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_09): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_09);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_10): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_10);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_11): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_11);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afi): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afi);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afc): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afc);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afr): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afr);
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	DIE_NODE(ps_afnc1_ioa): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc0_ioa): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc1_ls): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc0_ls): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw0): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw1): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw2): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw2);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc0_lw0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+	};
+
+	DIE_NODE(ps_scodec): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(scodec);
+		power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_common): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc1_common): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_c0_usb31drd): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usb31drd): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_dispext0_fe): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_dispext1_fe): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_ane_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_avd_sys): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(avd_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_dispext0_cpu0): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+	};
+
+	DIE_NODE(ps_dispext1_cpu0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+	};
+
+	DIE_NODE(ps_ane_sys_cpu): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+#if DIE_NO == 0
+	/* PMP is only present on die 0 of the M1 Ultra */
+	DIE_NODE(ps_pmp): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmp);
+	};
+#endif
+
+	DIE_NODE(ps_pms_sram): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_sram);
+	};
+
+	DIE_NODE(ps_apcie_st_sys): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_apcie_st1_sys): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st1_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_atc2_common): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc3_common): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_usb): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(usb);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+	};
+
+	DIE_NODE(ps_apcie_gp_sys): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp_sys);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>, <&DIE_NODE(ps_apcie_gp)>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	DIE_NODE(ps_atc0_cio): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc0_pcie): power-controller@330 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_cio): power-controller@338 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc1_pcie): power-controller@340 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_cio): power-controller@348 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc2_pcie): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_cio): power-controller@358 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_atc3_pcie): power-controller@360 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_c0_usbctl): power-controller@368 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usbctl): power-controller@370 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_pcie): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_usb): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_pcie): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_usb): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_pcie): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_usb): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_pcie): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_usb): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_trace_fab): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(trace_fab);
+	};
+};
+
+&DIE_NODE(pmgr_east) {
+	DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi0);
+		apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi1);
+		apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi2);
+		apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi3);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi4);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_ispsens0): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens0);
+	};
+
+	DIE_NODE(ps_ispsens1): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens1);
+	};
+
+	DIE_NODE(ps_ispsens2): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens2);
+	};
+
+	DIE_NODE(ps_ispsens3): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens3);
+	};
+
+	DIE_NODE(ps_afnc2_ioa): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc2_ls): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw0): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw1): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc3_ioa): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc3_ls): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc3_lw0): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+	};
+
+	DIE_NODE(ps_sio): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_sio_cpu): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_cpu);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm0): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm1): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm2): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c0): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c1): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c2): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c3): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c3);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c4): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c4);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c5): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c5);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c6): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c6);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c7): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c7);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi_p): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi0): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi0);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi1): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi1);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi2): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi2);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi3): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi3);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi4): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi4);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_sio_spmi0): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi1): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi2): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_p): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_n): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_n);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart0): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart0);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart1): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart1);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart2): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart2);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart3): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart3);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart4): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart4);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart6): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart6);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart7): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart7);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_audio_p): power-controller@278 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(audio_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_adma): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_adma);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_mca0): power-controller@288 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca0);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca1): power-controller@290 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca1);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca2): power-controller@298 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca2);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca3): power-controller@2a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca3);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_dpa0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa0);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa1): power-controller@2b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa1);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa2): power-controller@2b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa2);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa3): power-controller@2c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa3);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa4): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa4);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_aes): power-controller@2d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aes);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_amcc1): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc1);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc3): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc3);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_04): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_04);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_05): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_05);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_06): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_06);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_07): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_07);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_12): power-controller@308 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_12);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_13): power-controller@310 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_13);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_14): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_14);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_15): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_15);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_disp0_fe): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	DIE_NODE(ps_disp0_cpu0): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_cpu0);
+		power-domains = <&DIE_NODE(ps_disp0_fe)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_dispdfr_fe): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_dispdfr_be): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_be);
+		power-domains = <&DIE_NODE(ps_dispdfr_fe)>;
+	};
+
+	DIE_NODE(ps_mipi_dsi): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mipi_dsi);
+		power-domains = <&DIE_NODE(ps_dispdfr_be)>;
+	};
+
+	DIE_NODE(ps_jpg): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(jpg);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0_ase_core): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0_ase_core);
+		power-domains = <&DIE_NODE(ps_msr0)>;
+	};
+
+	DIE_NODE(ps_isp_sys): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_venc_sys): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_ans2): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ans2);
+		/*
+		 * The ADT makes ps_apcie_st[1]_sys depend on ps_ans2 instead,
+		 * but we'd rather have a single power domain for the downstream
+		 * device to depend on, so use this node as the child.
+		 * This makes more sense anyway (since ANS2 uses APCIE_ST).
+		 */
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_gfx): power-controller@3c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gfx);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_sep): power-controller@c00 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sep);
+		apple,always-on; /* Locked on */
+	};
+
+	DIE_NODE(ps_venc_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_dma);
+		power-domains = <&DIE_NODE(ps_venc_sys)>;
+	};
+
+	DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe4);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe5);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me0);
+		power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me1);
+		power-domains = <&DIE_NODE(ps_venc_me0)>;
+	};
+};
+
+&DIE_NODE(pmgr_south) {
+	DIE_NODE(ps_amcc4): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc4);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc5): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc5);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc6): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc6);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc7): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc7);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_16): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_16);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_17): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_17);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_18): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_18);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_19): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_19);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_20): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_20);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_21): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_21);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_22): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_22);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_23): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_23);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_24): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_24);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_25): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_25);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_26): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_26);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_27): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_27);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_28): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_28);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_29): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_29);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_30): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_30);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_31): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_31);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+	};
+
+	DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+	};
+
+	DIE_NODE(ps_dispext2_fe): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+	};
+
+	DIE_NODE(ps_dispext3_fe): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext3_cpu0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+	};
+
+	DIE_NODE(ps_msr1): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr1_ase_core): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1_ase_core);
+		power-domains = <&DIE_NODE(ps_msr1)>;
+	};
+
+	DIE_NODE(ps_venc1_sys): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	/* Seems to be disabled on shipping hardware */
+#if 0
+	DIE_NODE(ps_ane1_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>;
+	};
+
+	DIE_NODE(ps_ane1_sys_cpu): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane1_sys)>;
+	};
+#endif
+
+	DIE_NODE(ps_venc1_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_dma);
+		power-domains = <&DIE_NODE(ps_venc1_sys)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe4);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe5);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me0);
+		power-domains = <&DIE_NODE(ps_venc1_pipe4)>, <&DIE_NODE(ps_venc1_pipe5)>;
+	};
+
+	DIE_NODE(ps_venc1_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me1);
+		power-domains = <&DIE_NODE(ps_venc1_me0)>;
+	};
+
+	DIE_NODE(ps_prores): power-controller@c000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(prores);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+};
+
+&DIE_NODE(pmgr_mini) {
+	DIE_NODE(ps_debug): power-controller@58 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi0): power-controller@60 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi0);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi1): power-controller@68 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi1);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_aon): power-controller@70 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_aon);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_msg): power-controller@78 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msg);
+	};
+
+	DIE_NODE(ps_nub_gpio): power-controller@80 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_gpio);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb_aon): power-controller@88 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc1_usb_aon): power-controller@90 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc2_usb_aon): power-controller@98 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc3_usb_aon): power-controller@a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_gp_usb_aon): power-controller@a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gp_usb_aon);
+	};
+
+	DIE_NODE(ps_nub_fabric): power-controller@b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_fabric);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_sram): power-controller@b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_sram);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_debug_usb): power-controller@c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_usb);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_debug_auth): power-controller@c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_auth);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_atc0_usb): power-controller@d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb);
+		power-domains = <&DIE_NODE(ps_atc0_usb_aon)>, <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_usb): power-controller@d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb);
+		power-domains = <&DIE_NODE(ps_atc1_usb_aon)>, <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_usb): power-controller@e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb);
+		power-domains = <&DIE_NODE(ps_atc2_usb_aon)>, <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_usb): power-controller@e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb);
+		power-domains = <&DIE_NODE(ps_atc3_usb_aon)>, <&DIE_NODE(ps_atc3_common)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts
new file mode 100644
index 0000000000..1c3e37f86d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j274.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple Mac mini (M1, 2020)
+ *
+ * target-type: J274
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j274", "apple,t8103", "apple,arm-platform";
+	model = "Apple Mac mini (M1, 2020)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,atlantisb";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,atlantisb";
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+
+&port01 {
+	bus-range = <2 2>;
+	status = "okay";
+};
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
new file mode 100644
index 0000000000..56b0c67bfc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Pro (13-inch, M1, 2020)
+ *
+ * target-type: J293
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
+	model = "Apple MacBook Pro (13-inch, M1, 2020)";
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,honshu";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,honshu";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j313.dts b/arch/arm64/boot/dts/apple/t8103-j313.dts
new file mode 100644
index 0000000000..97a4344d8d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j313.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (M1, 2020)
+ *
+ * target-type: J313
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j313", "apple,t8103", "apple,arm-platform";
+	model = "Apple MacBook Air (M1, 2020)";
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,shikoku";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,shikoku";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
new file mode 100644
index 0000000000..58c8e43789
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iMac (24-inch, 4x USB-C, M1, 2020)
+ *
+ * target-type: J456
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j456", "apple,t8103", "apple,arm-platform";
+	model = "Apple iMac (24-inch, 4x USB-C, M1, 2021)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,capri";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,capri";
+};
+
+&i2c0 {
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+
+&port01 {
+	bus-range = <2 2>;
+	status = "okay";
+};
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
new file mode 100644
index 0000000000..152f95fd49
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iMac (24-inch, 2x USB-C, M1, 2020)
+ *
+ * target-type: J457
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j457", "apple,t8103", "apple,arm-platform";
+	model = "Apple iMac (24-inch, 2x USB-C, M1, 2021)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,santorini";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,santorini";
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
new file mode 100644
index 0000000000..5988a4eb6e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple M1 Mac mini, MacBook Air/Pro, iMac 24" (M1, 2020/2021)
+ *
+ * This file contains parts common to all Apple M1 devices using the t8103.
+ *
+ * target-type: J274, J293, J313, J456, J457
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth0;
+		serial0 = &serial0;
+		serial2 = &serial2;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: network@0,0 {
+		compatible = "pci14e4,4425";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 00 00 00 00 00];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f69";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <900000000>;
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
new file mode 100644
index 0000000000..9645861a85
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
@@ -0,0 +1,1133 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8103 "M1" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+&pmgr {
+	ps_sbr: power-controller@100 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@108 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@110 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+		apple,always-on; /* Core device */
+	};
+
+	ps_soc_spmi0: power-controller@118 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi0";
+	};
+
+	ps_soc_spmi1: power-controller@120 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi1";
+	};
+
+	ps_soc_spmi2: power-controller@128 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi2";
+	};
+
+	ps_gpio: power-controller@130 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms_busif: power-controller@138 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_busif";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms: power-controller@140 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms_fpwm0: power-controller@148 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm0";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm1: power-controller@150 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm1";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm2: power-controller@158 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm2";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm3: power-controller@160 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm3";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm4: power-controller@168 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm4";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_soc_dpe: power-controller@170 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_dpe";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pmgr_soc_ocla: power-controller@178 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmgr_soc_ocla";
+	};
+
+	ps_ispsens0: power-controller@180 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@188 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@190 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_ispsens3: power-controller@198 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens3";
+	};
+
+	ps_pcie_ref: power-controller@1a0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_aft0: power-controller@1a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aft0";
+	};
+
+	ps_devc0_ivdmc: power-controller@1b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "devc0_ivdmc";
+	};
+
+	ps_imx: power-controller@1b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "imx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sio_busif: power-controller@1c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio: power-controller@1c8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sio_cpu: power-controller@1d0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_cpu";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm0: power-controller@1d8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm0";
+	};
+
+	ps_fpwm1: power-controller@1e0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm1";
+	};
+
+	ps_fpwm2: power-controller@1e8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm2";
+	};
+
+	ps_i2c0: power-controller@1f0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c1: power-controller@1f8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c2: power-controller@200 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c3: power-controller@208 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c4: power-controller@210 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi_p: power-controller@218 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_uart_p: power-controller@220 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_audio_p: power-controller@228 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "audio_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_sio_adma: power-controller@230 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_adma";
+		power-domains = <&ps_sio>, <&ps_pms>, <&ps_audio_p>;
+	};
+
+	ps_aes: power-controller@238 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi0: power-controller@240 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_spi1: power-controller@248 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_spi2: power-controller@250 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_spi3: power-controller@258 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_uart_n: power-controller@268 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_n";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart0: power-controller@270 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart1: power-controller@278 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart2: power-controller@280 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart3: power-controller@288 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart4: power-controller@290 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart5: power-controller@298 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart6: power-controller@2a0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart7: power-controller@2a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart8: power-controller@2b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_mca0: power-controller@2b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca1: power-controller@2c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca2: power-controller@2c8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca3: power-controller@2d0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca4: power-controller@2d8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca5: power-controller@2e0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_dpa0: power-controller@2e8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_dpa1: power-controller@2f0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_mcc: power-controller@2f8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory controller */
+	};
+
+	ps_spi4: power-controller@260 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_dcs0: power-controller@300 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@310 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@308 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@318 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_smx: power-controller@340 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_apcie: power-controller@348 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie";
+		power-domains = <&ps_imx>, <&ps_pcie_ref>;
+	};
+
+	ps_rmx: power-controller@350 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_mmx: power-controller@358 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mmx";
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	ps_disp0_fe: power-controller@360 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rmx>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_dispext_fe: power-controller@368 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_fe";
+		power-domains = <&ps_rmx>;
+	};
+
+	ps_dispext_cpu0: power-controller@378 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_cpu0";
+		power-domains = <&ps_dispext_fe>;
+		apple,min-state = <4>;
+	};
+
+	ps_jpg: power-controller@3c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_msr: power-controller@3c8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_msr_ase_core: power-controller@3d0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr_ase_core";
+	};
+
+	ps_pmp: power-controller@3d8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@3e0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_apcie_gp: power-controller@3e8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_gp";
+		power-domains = <&ps_apcie>;
+	};
+
+	ps_ans2: power-controller@3f0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans2";
+	};
+
+	ps_gfx: power-controller@3f8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_dcs4: power-controller@320 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@330 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@328 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs7: power-controller@338 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dispdfr_fe: power-controller@3a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_fe";
+		power-domains = <&ps_rmx>;
+	};
+
+	ps_dispdfr_be: power-controller@3b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_be";
+		power-domains = <&ps_dispdfr_fe>;
+	};
+
+	ps_mipi_dsi: power-controller@3b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_dispdfr_be>;
+	};
+
+	ps_isp_sys: power-controller@400 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rmx>;
+	};
+
+	ps_venc_sys: power-controller@408 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_avd_sys: power-controller@410 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_apcie_st: power-controller@418 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_st";
+		power-domains = <&ps_apcie>, <&ps_ans2>;
+	};
+
+	ps_ane_sys: power-controller@470 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x470 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys";
+	};
+
+	ps_atc0_common: power-controller@420 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_common";
+	};
+
+	ps_atc0_pcie: power-controller@428 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_pcie";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio: power-controller@430 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x430 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio_pcie: power-controller@438 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x438 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_pcie";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc0_cio_usb: power-controller@440 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x440 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_usb";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc1_common: power-controller@448 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x448 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_common";
+	};
+
+	ps_atc1_pcie: power-controller@450 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x450 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_pcie";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio: power-controller@458 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x458 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio_pcie: power-controller@460 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x460 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_pcie";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_atc1_cio_usb: power-controller@468 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x468 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_usb";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_sep: power-controller@c00 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_dma: power-controller@8000 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@8008 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_pipe5: power-controller@8010 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_me0: power-controller@8018 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc_pipe4>, <&ps_venc_pipe5>;
+	};
+
+	ps_venc_me1: power-controller@8020 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc_pipe4>, <&ps_venc_pipe5>;
+	};
+
+	ps_ane_sys_cpu: power-controller@c000 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys_cpu";
+		power-domains = <&ps_ane_sys>;
+	};
+
+	ps_disp0_cpu0: power-controller@10018 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x10018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_cpu0";
+		power-domains = <&ps_disp0_fe>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+		apple,min-state = <4>;
+	};
+};
+
+&pmgr_mini {
+	ps_debug: power-controller@58 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi0: power-controller@60 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi0";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@70 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_gpio: power-controller@80 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_gpio";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_fabric: power-controller@a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_sram: power-controller@b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug_usb: power-controller@b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_usb";
+		apple,always-on; /* Core AON device */
+		power-domains = <&ps_debug>;
+	};
+
+	ps_debug_auth: power-controller@c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_auth";
+		apple,always-on; /* Core AON device */
+		power-domains = <&ps_debug>;
+	};
+
+	ps_nub_spmi1: power-controller@68 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi1";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_msg: power-controller@78 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msg";
+	};
+
+	ps_atc0_usb_aon: power-controller@88 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb_aon";
+	};
+
+	ps_atc1_usb_aon: power-controller@90 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb_aon";
+	};
+
+	ps_atc0_usb: power-controller@98 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb";
+		power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>;
+	};
+
+	ps_atc1_usb: power-controller@a0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb";
+		power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
new file mode 100644
index 0000000000..9b0dad6b61
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -0,0 +1,847 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8103 "M1" SoC
+ *
+ * Other names: H13G, "Tonga"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	compatible = "apple,t8103", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e1: cpu@1 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e2: cpu@2 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e3: cpu@3 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_p0: cpu@10100 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p1: cpu@10101 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p2: cpu@10102 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p3: cpu@10103 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <22000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-level = <6>;
+			clock-latency-ns = <29000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1956000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2184000000>;
+			opp-level = <8>;
+			clock-latency-ns = <34000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2388000000>;
+			opp-level = <9>;
+			clock-latency-ns = <36000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-level = <10>;
+			clock-latency-ns = <51000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2772000000>;
+			opp-level = <11>;
+			clock-latency-ns = <54000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <55000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <55000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3144000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-e {
+		compatible = "apple,icestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,firestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		cpufreq_e: performance-controller@210e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: performance-controller@211e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		sio_dart: iommu@235004000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x2 0x35004000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 635 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_sio_cpu>;
+		};
+
+		i2c0: i2c@235010000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35010000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 627 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c0>;
+		};
+
+		i2c1: i2c@235014000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35014000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 628 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c1>;
+		};
+
+		i2c2: i2c@235018000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35018000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 629 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			status = "disabled"; /* not used in all devices */
+			power-domains = <&ps_i2c2>;
+		};
+
+		i2c3: i2c@23501c000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x3501c000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 630 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c3>;
+		};
+
+		i2c4: i2c@235020000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35020000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 631 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c4>;
+			status = "disabled"; /* only used in J293 */
+		};
+
+		fpwm1: pwm@235044000 {
+			compatible = "apple,t8103-fpwm", "apple,s5l-fpwm";
+			reg = <0x2 0x35044000 0x0 0x4000>;
+			power-domains = <&ps_fpwm1>;
+			clocks = <&clkref>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		serial0: serial@235200000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35200000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 605 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * TODO: figure out the clocking properly, there may
+			 * be a third selectable clock.
+			 */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		serial2: serial@235208000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35208000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 607 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart2>;
+			status = "disabled";
+		};
+
+		admac: dma-controller@238200000 {
+			compatible = "apple,t8103-admac", "apple,admac";
+			reg = <0x2 0x38200000 0x0 0x34000>;
+			dma-channels = <24>;
+			interrupts-extended = <0>,
+					      <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+					      <0>,
+					      <0>;
+			#dma-cells = <1>;
+			iommus = <&sio_dart 2>;
+			power-domains = <&ps_sio_adma>;
+			resets = <&ps_audio_p>;
+		};
+
+		mca: i2s@238400000 {
+			compatible = "apple,t8103-mca", "apple,mca";
+			reg = <0x2 0x38400000 0x0 0x18000>,
+			      <0x2 0x38300000 0x0 0x30000>;
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 619 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 620 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 621 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 623 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 624 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&ps_audio_p>;
+			clocks = <&nco 0>, <&nco 1>, <&nco 2>,
+				 <&nco 3>, <&nco 4>, <&nco 4>;
+			power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+					<&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>;
+			dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+			       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+			       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+			       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>,
+			       <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>,
+			       <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>;
+			dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+				"tx1a", "rx1a", "tx1b", "rx1b",
+				"tx2a", "rx2a", "tx2b", "rx2b",
+				"tx3a", "rx3a", "tx3b", "rx3b",
+				"tx4a", "rx4a", "tx4b", "rx4b",
+				"tx5a", "rx5a", "tx5b", "rx5b";
+
+			#sound-dai-cells = <1>;
+		};
+
+		nco: clock-controller@23b044000 {
+			compatible = "apple,t8103-nco", "apple,nco";
+			reg = <0x2 0x3b044000 0x0 0x14000>;
+			clocks = <&nco_clkref>;
+			#clock-cells = <1>;
+		};
+
+		aic: interrupt-controller@23b100000 {
+			compatible = "apple,t8103-aic", "apple,aic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x2 0x3b100000 0x0 0x8000>;
+			power-domains = <&ps_aic>;
+
+			affinities {
+				e-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_E>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
+				};
+
+				p-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_P>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
+				};
+			};
+		};
+
+		pmgr: power-management@23b700000 {
+			compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3b700000 0 0x14000>;
+		};
+
+		pinctrl_ap: pinctrl@23c100000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3c100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 212>;
+			apple,npins = <212>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(192, 1)>,
+					 <APPLE_PINMUX(188, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(201, 1)>,
+					 <APPLE_PINMUX(199, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(163, 1)>,
+					 <APPLE_PINMUX(162, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(73, 1)>,
+					 <APPLE_PINMUX(72, 1)>;
+			};
+
+			i2c4_pins: i2c4-pins {
+				pinmux = <APPLE_PINMUX(135, 1)>,
+					 <APPLE_PINMUX(134, 1)>;
+			};
+
+			pcie_pins: pcie-pins {
+				pinmux = <APPLE_PINMUX(150, 1)>,
+					 <APPLE_PINMUX(151, 1)>,
+					 <APPLE_PINMUX(32, 1)>;
+			};
+		};
+
+		pinctrl_nub: pinctrl@23d1f0000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3d1f0000 0x0 0x4000>;
+			power-domains = <&ps_nub_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 23>;
+			apple,npins = <23>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 336 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@23d280000 {
+			compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3d280000 0 0x4000>;
+		};
+
+		wdt: watchdog@23d2b0000 {
+			compatible = "apple,t8103-wdt", "apple,wdt";
+			reg = <0x2 0x3d2b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 338 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@23e820000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3e820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 16>;
+			apple,npins = <16>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aop: pinctrl@24a820000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x4a820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ans_mbox: mbox@277408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x77408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 583 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 584 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 585 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 586 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans2>;
+		};
+
+		sart: iommu@27bc50000 {
+			compatible = "apple,t8103-sart";
+			reg = <0x2 0x7bc50000 0x0 0x10000>;
+			power-domains = <&ps_ans2>;
+		};
+
+		nvme@27bcc0000 {
+			compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2";
+			reg = <0x2 0x7bcc0000 0x0 0x40000>,
+				<0x2 0x77400000 0x0 0x4000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans2>, <&ps_apcie_st>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans2>;
+		};
+
+		pcie0_dart_0: iommu@681008000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x6 0x81008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 696 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+		};
+
+		pcie0_dart_1: iommu@682008000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x6 0x82008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie0_dart_2: iommu@683008000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x6 0x83008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@690000000 {
+			compatible = "apple,t8103-pcie", "apple,pcie";
+			device_type = "pci";
+
+			reg = <0x6 0x90000000 0x0 0x1000000>,
+			      <0x6 0x80000000 0x0 0x100000>,
+			      <0x6 0x81000000 0x0 0x4000>,
+			      <0x6 0x82000000 0x0 0x4000>,
+			      <0x6 0x83000000 0x0 0x4000>;
+			reg-names = "config", "rc", "port0", "port1", "port2";
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller;
+			msi-parent = <&pcie0>;
+			msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
+
+
+			iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				    <0x200 &pcie0_dart_1 1 1>,
+				    <0x300 &pcie0_dart_2 1 1>;
+			iommu-map-mask = <0xff00>;
+
+			bus-range = <0 3>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+			power-domains = <&ps_apcie_gp>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+
+			port00: pci@0,0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 152 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+						<0 0 0 2 &port00 0 0 0 1>,
+						<0 0 0 3 &port00 0 0 0 2>,
+						<0 0 0 4 &port00 0 0 0 3>;
+			};
+
+			port01: pci@1,0 {
+				device_type = "pci";
+				reg = <0x800 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 153 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+						<0 0 0 2 &port01 0 0 0 1>,
+						<0 0 0 3 &port01 0 0 0 2>,
+						<0 0 0 4 &port01 0 0 0 3>;
+				status = "disabled";
+			};
+
+			port02: pci@2,0 {
+				device_type = "pci";
+				reg = <0x1000 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+						<0 0 0 2 &port02 0 0 0 1>,
+						<0 0 0 3 &port02 0 0 0 2>,
+						<0 0 0 4 &port02 0 0 0 3>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "t8103-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8112-j413.dts b/arch/arm64/boot/dts/apple/t8112-j413.dts
new file mode 100644
index 0000000000..6f69658623
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j413.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (M2, 2022)
+ *
+ * target-type: J413
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j413", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Air (13-inch, M2, 2022)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,hokkaido";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,hokkaido";
+	};
+};
+
+&i2c0 {
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j473.dts b/arch/arm64/boot/dts/apple/t8112-j473.dts
new file mode 100644
index 0000000000..06fe257f08
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j473.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple Mac mini (M2, 2023)
+ *
+ * target-type: J473
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j473", "apple,t8112", "apple,arm-platform";
+	model = "Apple Mac mini (M2, 2023)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+};
+
+&port01 {
+	bus-range = <2 2>;
+	status = "okay";
+};
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie1_dart {
+	status = "okay";
+};
+
+&pcie2_dart {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts
new file mode 100644
index 0000000000..0ad908349f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j493.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Pro (13-inch, M1, 2022)
+ *
+ * target-type: J493
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j493", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Pro (13-inch, M2, 2022)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4425";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 00 00 00 00 00];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,kyushu";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f69";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,kyushu";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
new file mode 100644
index 0000000000..f5edf61113
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple M2 MacBook Air/Pro (M2, 2022)
+ *
+ * This file contains parts common to all Apple M2 devices using the t8112.
+ *
+ * target-type: J493, J413
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&nco_clkref {
+	clock-frequency = <900000000>;
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi
new file mode 100644
index 0000000000..7c050c6f27
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi
@@ -0,0 +1,1140 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8112 "M2" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+&pmgr {
+	ps_sbr: power-controller@100 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@108 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@110 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+		apple,always-on; /* Core device */
+	};
+
+	ps_soc_spmi0: power-controller@118 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi0";
+	};
+
+	ps_gpio: power-controller@120 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms_busif: power-controller@128 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_busif";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms: power-controller@130 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms_c1ppt: power-controller@160 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_c1ppt";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_soc_dpe: power-controller@168 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_dpe";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pmgr_soc_ocla: power-controller@170 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmgr_soc_ocla";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_ispsens0: power-controller@178 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@180 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@188 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_ispsens3: power-controller@190 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens3";
+	};
+
+	ps_pcie_ref: power-controller@198 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_aft0: power-controller@1a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aft0";
+	};
+
+	ps_imx: power-controller@1a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "imx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sio_busif: power-controller@1b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio: power-controller@1b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		apple,always-on;
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sio_cpu: power-controller@1c0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_cpu";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm0: power-controller@1c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm1: power-controller@1d0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm2: power-controller@1d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c0: power-controller@1e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c1: power-controller@1e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c2: power-controller@1f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c3: power-controller@1f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c4: power-controller@200 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi_p: power-controller@208 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_uart_p: power-controller@210 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_audio_p: power-controller@218 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "audio_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_aes: power-controller@220 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi0: power-controller@228 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi1: power-controller@230 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi2: power-controller@238 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi3: power-controller@240 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi4: power-controller@248 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi5: power-controller@250 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi5";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_uart_n: power-controller@258 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_n";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart0: power-controller@260 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart1: power-controller@268 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart2: power-controller@270 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart3: power-controller@278 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart4: power-controller@280 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart5: power-controller@288 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart6: power-controller@290 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart7: power-controller@298 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart8: power-controller@2a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_sio_adma: power-controller@2a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_adma";
+		power-domains = <&ps_spi_p>, <&ps_audio_p>;
+	};
+
+	ps_dpa0: power-controller@2b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_dpa1: power-controller@2b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_mca0: power-controller@2c0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca1: power-controller@2c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca2: power-controller@2d0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca3: power-controller@2d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca4: power-controller@2e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca5: power-controller@2e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mcc: power-controller@2f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory controller */
+	};
+
+	ps_dcs0: power-controller@2f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@300 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@308 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@310 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@318 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@320 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@328 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs7: power-controller@330 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_smx0: power-controller@338 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx0";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_smx1: power-controller@340 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx1";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_apcie: power-controller@348 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie";
+		power-domains = <&ps_imx>, <&ps_pcie_ref>;
+	};
+
+	ps_rmx0: power-controller@350 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx0";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_rmx1: power-controller@358 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx1";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_cmx: power-controller@360 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cmx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mmx: power-controller@368 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mmx";
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	ps_disp0_sys: power-controller@370 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_sys";
+		power-domains = <&ps_rmx1>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_disp0_fe: power-controller@378 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_disp0_sys>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_dispext_sys: power-controller@380 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_sys";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_dispext_fe: power-controller@388 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_fe";
+		power-domains = <&ps_dispext_sys>;
+	};
+
+	ps_dispext_cpu0: power-controller@3c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_cpu0";
+		power-domains = <&ps_dispext_fe>;
+		apple,min-state = <4>;
+	};
+
+	ps_dptx_ext_phy: power-controller@3d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dptx_ext_phy";
+	};
+
+	ps_dispdfr_fe: power-controller@3e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_fe";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_dispdfr_be: power-controller@3e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_be";
+		power-domains = <&ps_dispdfr_fe>;
+	};
+
+	ps_mipi_dsi: power-controller@3f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_dispdfr_be>;
+	};
+
+	ps_jpg: power-controller@3f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_cmx>;
+	};
+
+	ps_apcie_gp: power-controller@400 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_gp";
+		power-domains = <&ps_apcie>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	ps_msr: power-controller@408 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_pmp: power-controller@410 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+		apple,always-on;
+	};
+
+	ps_pms_sram: power-controller@418 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+		apple,always-on;
+	};
+
+	ps_msr_ase_core: power-controller@420 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr_ase_core";
+		power-domains = <&ps_msr>;
+	};
+
+	ps_ans: power-controller@428 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_gfx: power-controller@430 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x430 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_isp_sys: power-controller@438 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x438 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rmx1>;
+	};
+
+	ps_venc_sys: power-controller@440 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x440 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_rmx1>;
+	};
+
+	ps_avd_sys: power-controller@448 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x448 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_apcie_st: power-controller@450 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x450 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_st";
+		power-domains = <&ps_apcie>, <&ps_ans>;
+	};
+
+	ps_atc0_common: power-controller@458 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x458 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_common";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_atc0_pcie: power-controller@460 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x460 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_pcie";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio: power-controller@468 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x468 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio_pcie: power-controller@470 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x470 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_pcie";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc0_cio_usb: power-controller@478 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x478 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_usb";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc1_common: power-controller@480 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x480 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_common";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_atc1_pcie: power-controller@488 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x488 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_pcie";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio: power-controller@490 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x490 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio_pcie: power-controller@498 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x498 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_pcie";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_atc1_cio_usb: power-controller@4a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_usb";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_ane_sys: power-controller@4a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_scodec: power-controller@4b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "scodec";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_sep: power-controller@c00 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on;
+	};
+
+	ps_venc_dma: power-controller@8000 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@8008 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_pipe5: power-controller@8010 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_me0: power-controller@8018 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>;
+	};
+
+	ps_venc_me1: power-controller@8020 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>;
+	};
+
+	ps_disp0_cpu0: power-controller@10000 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x10000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_cpu0";
+		power-domains = <&ps_disp0_fe>;
+		apple,min-state = <4>;
+	};
+};
+
+&pmgr_mini {
+
+	ps_debug_gated: power-controller@58 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_gated";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi0: power-controller@60 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi0";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi1: power-controller@68 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi1";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@70 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_msg: power-controller@78 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msg";
+	};
+
+	ps_nub_gpio: power-controller@80 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_gpio";
+		apple,always-on;
+	};
+
+	ps_atc0_usb_aon: power-controller@88 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb_aon";
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	ps_atc1_usb_aon: power-controller@90 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb_aon";
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	ps_atc0_usb: power-controller@98 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb";
+		power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>;
+	};
+
+	ps_atc1_usb: power-controller@a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb";
+		power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>;
+	};
+
+	ps_nub_fabric: power-controller@a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_sram: power-controller@b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug_switch: power-controller@b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_switch";
+		apple,always-on; /* Core AON device */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
new file mode 100644
index 0000000000..1666e6ab25
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -0,0 +1,921 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8112 "M2" SoC
+ *
+ * Other names: H14G
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	compatible = "apple,t8112", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e1: cpu@1 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e2: cpu@2 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e3: cpu@3 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_p0: cpu@10100 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p1: cpu@10101 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p2: cpu@10102 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p3: cpu@10103 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	};
+
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <2>;
+			clock-latency-ns = <20000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <4>;
+			clock-latency-ns = <30000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2004000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2256000000>;
+			opp-level = <6>;
+			clock-latency-ns = <39000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2424000000>;
+			opp-level = <7>;
+			clock-latency-ns = <53000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <660000000>;
+			opp-level = <1>;
+			clock-latency-ns = <9000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <924000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1188000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1452000000>;
+			opp-level = <4>;
+			clock-latency-ns = <24000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <5>;
+			clock-latency-ns = <26000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1968000000>;
+			opp-level = <6>;
+			clock-latency-ns = <28000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <7>;
+			clock-latency-ns = <30000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <8>;
+			clock-latency-ns = <33000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2568000000>;
+			opp-level = <9>;
+			clock-latency-ns = <34000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2724000000>;
+			opp-level = <10>;
+			clock-latency-ns = <36000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2868000000>;
+			opp-level = <11>;
+			clock-latency-ns = <41000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <42000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <44000>;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <14>;
+			clock-latency-ns = <46000>;
+		};
+		/* Not available until CPU deep sleep is implemented */
+#if 0
+		opp15 {
+			opp-hz = /bits/ 64 <3324000000>;
+			opp-level = <15>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+		opp16 {
+			opp-hz = /bits/ 64 <3408000000>;
+			opp-level = <16>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+		opp17 {
+			opp-hz = /bits/ 64 <3504000000>;
+			opp-level = <17>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-e {
+		compatible = "apple,blizzard-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,avalanche-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		cpufreq_e: cpufreq@210e20000 {
+			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: cpufreq@211e20000 {
+			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		sio_dart: iommu@235004000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x2 0x35004000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 769 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_sio_cpu>;
+		};
+
+		i2c0: i2c@235010000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35010000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 761 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@235014000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35014000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 762 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@235018000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35018000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 763 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@23501c000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x3501c000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 764 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c3>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@235020000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35020000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 765 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c4>;
+			status = "disabled";
+		};
+
+		fpwm1: pwm@235044000 {
+			compatible = "apple,t8112-fpwm", "apple,s5l-fpwm";
+			reg = <0x2 0x35044000 0x0 0x4000>;
+			power-domains = <&ps_fpwm1>;
+			clocks = <&clkref>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		serial0: serial@235200000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35200000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 739 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * TODO: figure out the clocking properly, there may
+			 * be a third selectable clock.
+			 */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		serial2: serial@235208000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35208000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 741 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart2>;
+			status = "disabled";
+		};
+
+		admac: dma-controller@238200000 {
+			compatible = "apple,t8112-admac", "apple,admac";
+			reg = <0x2 0x38200000 0x0 0x34000>;
+			dma-channels = <24>;
+			interrupts-extended = <0>,
+					      <&aic AIC_IRQ 760 IRQ_TYPE_LEVEL_HIGH>,
+					      <0>,
+					      <0>;
+			#dma-cells = <1>;
+			iommus = <&sio_dart 2>;
+			power-domains = <&ps_sio_adma>;
+			resets = <&ps_audio_p>;
+		};
+
+		mca: i2s@238400000 {
+			compatible = "apple,t8112-mca", "apple,mca";
+			reg = <0x2 0x38400000 0x0 0x18000>,
+			      <0x2 0x38300000 0x0 0x30000>;
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 754 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 755 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 756 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 757 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 758 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&ps_audio_p>;
+			clocks = <&nco 0>, <&nco 1>, <&nco 2>,
+				 <&nco 3>, <&nco 4>, <&nco 4>;
+			power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+					<&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>;
+			dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+			       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+			       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+			       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>,
+			       <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>,
+			       <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>;
+			dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+				    "tx1a", "rx1a", "tx1b", "rx1b",
+				    "tx2a", "rx2a", "tx2b", "rx2b",
+				    "tx3a", "rx3a", "tx3b", "rx3b",
+				    "tx4a", "rx4a", "tx4b", "rx4b",
+				    "tx5a", "rx5a", "tx5b", "rx5b";
+
+			#sound-dai-cells = <1>;
+		};
+
+		nco: clock-controller@23b044000 {
+			compatible = "apple,t8112-nco", "apple,nco";
+			reg = <0x2 0x3b044000 0x0 0x14000>;
+			clocks = <&nco_clkref>;
+			#clock-cells = <1>;
+		};
+
+		aic: interrupt-controller@23b0c0000 {
+			compatible = "apple,t8112-aic", "apple,aic2";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x2 0x3b0c0000 0x0 0x8000>,
+				<0x2 0x3b0c8000 0x0 0x4>;
+			reg-names = "core", "event";
+			power-domains = <&ps_aic>;
+
+			affinities {
+				e-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_E>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
+				};
+
+				p-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_P>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
+				};
+			};
+		};
+
+		pmgr: power-management@23b700000 {
+			compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3b700000 0 0x14000>;
+			/* child nodes are added in t8103-pmgr.dtsi */
+		};
+
+		pinctrl_ap: pinctrl@23c100000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3c100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 213>;
+			apple,npins = <213>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 205 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(111, 1)>,
+					 <APPLE_PINMUX(110, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(113, 1)>,
+					 <APPLE_PINMUX(112, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(87, 1)>,
+					 <APPLE_PINMUX(86, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(54, 1)>,
+					 <APPLE_PINMUX(53, 1)>;
+			};
+
+			i2c4_pins: i2c4-pins {
+				pinmux = <APPLE_PINMUX(131, 1)>,
+					 <APPLE_PINMUX(130, 1)>;
+			};
+
+			spi3_pins: spi3-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					<APPLE_PINMUX(47, 1)>,
+					<APPLE_PINMUX(48, 1)>,
+					<APPLE_PINMUX(49, 1)>;
+			};
+
+			pcie_pins: pcie-pins {
+				pinmux = <APPLE_PINMUX(162, 1)>,
+					 <APPLE_PINMUX(163, 1)>,
+					 <APPLE_PINMUX(164, 1)>;
+				// TODO: 1 more CLKREQs
+			};
+		};
+
+		pinctrl_nub: pinctrl@23d1f0000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3d1f0000 0x0 0x4000>;
+			power-domains = <&ps_nub_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 24>;
+			apple,npins = <24>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 371 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 372 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 373 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 377 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@23d280000 {
+			compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3d280000 0 0x4000>;
+			/* child nodes are added in t8103-pmgr.dtsi */
+		};
+
+		wdt: watchdog@23d2b0000 {
+			compatible = "apple,t8112-wdt", "apple,wdt";
+			reg = <0x2 0x3d2b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 379 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@23e820000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3e820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 18>;
+			apple,npins = <18>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 490 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 491 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 492 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 493 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 494 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 495 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 496 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aop: pinctrl@24a820000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x4a820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 54>;
+			apple,npins = <54>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ans_mbox: mbox@277408000 {
+			compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x77408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 717 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 718 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 719 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 720 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans>;
+		};
+
+		sart: sart@27bc50000 {
+			compatible = "apple,t8112-sart", "apple,t6000-sart";
+			reg = <0x2 0x7bc50000 0x0 0x10000>;
+			power-domains = <&ps_ans>;
+		};
+
+		nvme@27bcc0000 {
+			compatible = "apple,t8112-nvme-ans2", "apple,nvme-ans2";
+			reg = <0x2 0x7bcc0000 0x0 0x40000>,
+				<0x2 0x77400000 0x0 0x4000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 724 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans>, <&ps_apcie_st>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans>;
+		};
+
+		pcie0_dart: iommu@681008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x81008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 782 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+		};
+
+		pcie1_dart: iommu@682008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x82008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 785 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie2_dart: iommu@683008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x83008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 788 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie3_dart: iommu@684008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x84008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 791 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@690000000 {
+			compatible = "apple,t8112-pcie", "apple,pcie";
+			device_type = "pci";
+
+			reg = <0x6 0x90000000 0x0 0x1000000>,
+			      <0x6 0x80000000 0x0 0x100000>,
+			      <0x6 0x81000000 0x0 0x4000>,
+			      <0x6 0x82000000 0x0 0x4000>,
+			      <0x6 0x83000000 0x0 0x4000>,
+			      <0x6 0x84000000 0x0 0x4000>;
+			reg-names = "config", "rc", "port0", "port1", "port2", "port3";
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 787 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 790 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller;
+			msi-parent = <&pcie0>;
+			msi-ranges = <&aic AIC_IRQ 793 IRQ_TYPE_EDGE_RISING 32>;
+
+			iommu-map = <0x100 &pcie0_dart 0 1>,
+				    <0x200 &pcie1_dart 1 1>,
+				    <0x300 &pcie2_dart 2 1>,
+				    <0x400 &pcie3_dart 3 1>;
+			iommu-map-mask = <0xff00>;
+
+			bus-range = <0 4>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+			power-domains = <&ps_apcie_gp>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+
+			port00: pci@0,0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 166 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+						<0 0 0 2 &port00 0 0 0 1>,
+						<0 0 0 3 &port00 0 0 0 2>,
+						<0 0 0 4 &port00 0 0 0 3>;
+			};
+
+			port01: pci@1,0 {
+				device_type = "pci";
+				reg = <0x800 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 167 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+						<0 0 0 2 &port01 0 0 0 1>,
+						<0 0 0 3 &port01 0 0 0 2>,
+						<0 0 0 4 &port01 0 0 0 3>;
+
+				status = "disabled";
+			};
+
+			port02: pci@2,0 {
+				device_type = "pci";
+				reg = <0x1000 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 168 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+						<0 0 0 2 &port02 0 0 0 1>,
+						<0 0 0 3 &port02 0 0 0 2>,
+						<0 0 0 4 &port02 0 0 0 3>;
+
+				status = "disabled";
+			};
+
+			/* TODO: GPIO unknown */
+			port03: pci@3,0 {
+				device_type = "pci";
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				//reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+						<0 0 0 2 &port03 0 0 0 1>,
+						<0 0 0 3 &port03 0 0 0 2>,
+						<0 0 0 4 &port03 0 0 0 3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "t8112-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
new file mode 100644
index 0000000000..d908e96d7d
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	foundation-v8.dtb foundation-v8-psci.dtb \
+	foundation-v8-gicv3.dtb foundation-v8-gicv3-psci.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb juno-scmi.dtb juno-r1-scmi.dtb juno-r2-scmi.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb
diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
new file mode 100644
index 0000000000..901a7fc833
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+	model = "ARM Corstone1000 FVP (Fixed Virtual Platform)";
+	compatible = "arm,corstone1000-fvp";
+
+	smsc: ethernet@4010000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x40100000 0x10000>;
+		phy-mode = "mii";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		reg-io-width = <2>;
+	};
+
+	vmmc_v3_3d: fixed_v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sdmmc0: mmc@40300000 {
+		compatible = "arm,pl18x", "arm,primecell";
+		reg = <0x40300000 0x1000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		max-frequency = <12000000>;
+		vmmc-supply = <&vmmc_v3_3d>;
+		clocks = <&smbclk>, <&refclk100mhz>;
+		clock-names = "smclk", "apb_pclk";
+	};
+
+	sdmmc1: mmc@50000000 {
+		compatible = "arm,pl18x", "arm,primecell";
+		reg = <0x50000000 0x10000>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		max-frequency = <12000000>;
+		vmmc-supply = <&vmmc_v3_3d>;
+		clocks = <&smbclk>, <&refclk100mhz>;
+		clock-names = "smclk", "apb_pclk";
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000-mps3.dts b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
new file mode 100644
index 0000000000..10d265be0c
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+	model = "ARM Corstone1000 FPGA MPS3 board";
+	compatible = "arm,corstone1000-mps3";
+
+	smsc: ethernet@4010000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x40100000 0x10000>;
+		phy-mode = "mii";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+	};
+
+	usb_host: usb@40200000 {
+		compatible = "nxp,usb-isp1763";
+		reg = <0x40200000 0x100000>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <16>;
+		dr_mode = "host";
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi
new file mode 100644
index 0000000000..6ad7829f9e
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	memory@88200000 {
+		device_type = "memory";
+		reg = <0x88200000 0x77e00000>;
+	};
+
+	gic: interrupt-controller@1c000000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1c010000 0x1000>,
+		      <0x1c02f000 0x2000>,
+		      <0x1c04f000 0x1000>,
+		      <0x1c06f000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+	};
+
+	refclk100mhz: refclk100mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	smbclk: refclk24mhzx2 {
+		/* Reference 24MHz clock x 2 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+		clock-output-names = "smclk";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	uartclk: uartclk {
+		/* UART clock - 50MHz */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "uartclk";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timer@1a220000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x1a220000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-frequency = <50000000>;
+			ranges;
+
+			frame@1a230000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x1a230000 0x1000>;
+			};
+		};
+
+		uart0: serial@1a510000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1a510000 0x1000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&refclk100mhz>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@1a520000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1a520000 0x1000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&refclk100mhz>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		mhu_hse1: mailbox@1b820000 {
+			compatible = "arm,mhuv2-tx", "arm,primecell";
+			reg = <0x1b820000 0x1000>;
+			clocks = <&refclk100mhz>;
+			clock-names = "apb_pclk";
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			arm,mhuv2-protocols = <0 0>;
+			secure-status = "okay";     /* secure-world-only */
+			status = "disabled";
+		};
+
+		mhu_seh1: mailbox@1b830000 {
+			compatible = "arm,mhuv2-rx", "arm,primecell";
+			reg = <0x1b830000 0x1000>;
+			clocks = <&refclk100mhz>;
+			clock-names = "apb_pclk";
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			arm,mhuv2-protocols = <0 0>;
+			secure-status = "okay";     /* secure-world-only */
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
new file mode 100644
index 0000000000..655fdcce15
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
@@ -0,0 +1,19 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv2 configuration)
+ */
+
+/ {
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x0 0x2c001000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x2000>,
+		      <0x0 0x2c004000 0 0x2000>,
+		      <0x0 0x2c006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts
new file mode 100644
index 0000000000..e096e670be
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts
@@ -0,0 +1,9 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv3+PSCI configuration)
+ */
+
+#include "foundation-v8.dtsi"
+#include "foundation-v8-gicv3.dtsi"
+#include "foundation-v8-psci.dtsi"
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts
new file mode 100644
index 0000000000..c87380e87f
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv3 configuration)
+ */
+
+#include "foundation-v8.dtsi"
+#include "foundation-v8-gicv3.dtsi"
+#include "foundation-v8-spin-table.dtsi"
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
new file mode 100644
index 0000000000..17fba3bc99
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
@@ -0,0 +1,29 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv3 configuration)
+ */
+
+/ {
+	gic: interrupt-controller@2f000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x2f000000 0x100000>;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0x0 0x10000>,
+		      <0x0 0x2f100000 0x0 0x200000>,
+		      <0x0 0x2c000000 0x0 0x2000>,
+		      <0x0 0x2c010000 0x0 0x2000>,
+		      <0x0 0x2c02f000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its: msi-controller@2f020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x20000 0x20000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-psci.dts b/arch/arm64/boot/dts/arm/foundation-v8-psci.dts
new file mode 100644
index 0000000000..723f23c7cd
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-psci.dts
@@ -0,0 +1,9 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv2+PSCI configuration)
+ */
+
+#include "foundation-v8.dtsi"
+#include "foundation-v8-gicv2.dtsi"
+#include "foundation-v8-psci.dtsi"
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi
new file mode 100644
index 0000000000..16cdf39572
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi
@@ -0,0 +1,28 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (PSCI configuration)
+ */
+
+/ {
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+};
+
+&cpu0 {
+	enable-method = "psci";
+};
+
+&cpu1 {
+	enable-method = "psci";
+};
+
+&cpu2 {
+	enable-method = "psci";
+};
+
+&cpu3 {
+	enable-method = "psci";
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi
new file mode 100644
index 0000000000..4d4186ba0e
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi
@@ -0,0 +1,25 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (spin table configuration)
+ */
+
+&cpu0 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x8000fff8>;
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x8000fff8>;
+};
+
+&cpu2 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x8000fff8>;
+};
+
+&cpu3 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x8000fff8>;
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
new file mode 100644
index 0000000000..b17347d75e
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv2 configuration)
+ */
+
+#include "foundation-v8.dtsi"
+#include "foundation-v8-gicv2.dtsi"
+#include "foundation-v8-spin-table.dtsi"
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
new file mode 100644
index 0000000000..7b41537731
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	model = "Foundation-v8A";
+	compatible = "arm,foundation-aarch64", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	watchdog@2a440000 {
+		compatible = "arm,sbsa-gwdt";
+		reg = <0x0 0x2a440000 0 0x1000>,
+			<0x0 0x2a450000 0 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		timeout-sec = <30>;
+	};
+
+	v2m_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	bus@8000000 {
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0 GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		ethernet@202000000 {
+			compatible = "smsc,lan91c111";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+		};
+
+		iofpga-bus@300000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@10000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+			};
+
+			v2m_serial0: serial@90000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: serial@a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: serial@b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: serial@c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			virtio@130000 {
+				compatible = "virtio,mmio";
+				reg = <0x130000 0x200>;
+				interrupts = <42>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
new file mode 100644
index 0000000000..60472d65a3
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * FVP Base RevC
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+#include "rtsm_ve-motherboard.dtsi"
+#include "rtsm_ve-motherboard-rs2.dtsi"
+
+/ {
+	model = "FVP Base RevC";
+	compatible = "arm,fvp-base-revc", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x000>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+		};
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+		};
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+		};
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+		};
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		C0_L2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		C1_L2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2,00000000 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x00000000 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	gic: interrupt-controller@2f000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0 0x10000>,	// GICD
+		      <0x0 0x2f100000 0 0x200000>,	// GICR
+		      <0x0 0x2c000000 0 0x2000>,	// GICC
+		      <0x0 0x2c010000 0 0x2000>,	// GICH
+		      <0x0 0x2c02f000 0 0x2000>;	// GICV
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its: msi-controller@2f020000 {
+			#msi-cells = <1>;
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0x2f020000 0x0 0x20000>; // GITS
+			msi-controller;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pci: pci@40000000 {
+		#address-cells = <0x3>;
+		#size-cells = <0x2>;
+		#interrupt-cells = <0x1>;
+		compatible = "pci-host-ecam-generic";
+		device_type = "pci";
+		bus-range = <0x0 0x1>;
+		reg = <0x0 0x40000000 0x0 0x10000000>;
+		ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>;
+		interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 0 GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 0 GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		msi-map = <0x0 &its 0x0 0x10000>;
+		iommu-map = <0x0 &smmu 0x0 0x10000>;
+
+		dma-coherent;
+	};
+
+	smmu: iommu@2b400000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0x2b400000 0x0 0x100000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		dma-coherent;
+		#iommu-cells = <1>;
+		msi-parent = <&its 0x10000>;
+	};
+
+	panel {
+		compatible = "arm,rtsm-display";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+
+	bus@8000000 {
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0 0 GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 0 GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 0 GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 0 GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 0 GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 0 GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 0 GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 0 GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 0 GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 0 GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic 0 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic 0 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic 0 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic 0 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic 0 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic 0 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic 0 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic 0 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic 0 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic 0 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic 0 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic 0 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic 0 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic 0 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic 0 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic 0 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic 0 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic 0 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic 0 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic 0 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic 0 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic 0 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic 0 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic 0 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic 0 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic 0 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic 0 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic 0 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 46 &gic 0 0 GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
new file mode 100644
index 0000000000..8b4d280b1e
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -0,0 +1,997 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "juno-clocks.dtsi"
+#include "juno-motherboard.dtsi"
+
+/ {
+	/*
+	 *  Devices shared by all Juno boards
+	 */
+
+	memtimer: timer@2a810000 {
+		compatible = "arm,armv7-timer-mem";
+		reg = <0x0 0x2a810000 0x0 0x10000>;
+		clock-frequency = <50000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2a820000 0x20000>;
+		status = "disabled";
+		frame@2a830000 {
+			frame-number = <1>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x10000 0x10000>;
+		};
+	};
+
+	mailbox: mhu@2b1f0000 {
+		compatible = "arm,mhu", "arm,primecell";
+		reg = <0x0 0x2b1f0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		clocks = <&soc_refclk100mhz>;
+		clock-names = "apb_pclk";
+	};
+
+	smmu_gpu: iommu@2b400000 {
+		compatible = "arm,mmu-400", "arm,smmu-v1";
+		reg = <0x0 0x2b400000 0x0 0x10000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		power-domains = <&scpi_devpd 1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	smmu_pcie: iommu@2b500000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x2b500000 0x0 0x10000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	smmu_etr: iommu@2b600000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x2b600000 0x0 0x10000>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	gic: interrupt-controller@2c010000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		reg = <0x0 0x2c010000 0 0x1000>,
+		      <0x0 0x2c02f000 0 0x2000>,
+		      <0x0 0x2c04f000 0 0x2000>,
+		      <0x0 0x2c06f000 0 0x2000>;
+		#address-cells = <1>;
+		#interrupt-cells = <3>;
+		#size-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+		ranges = <0 0 0x2c1c0000 0x40000>;
+
+		v2m_0: v2m@0 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0 0x10000>;
+		};
+
+		v2m@10000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x10000 0x10000>;
+		};
+
+		v2m@20000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x20000 0x10000>;
+		};
+
+		v2m@30000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x30000 0x10000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/*
+	 * Juno TRMs specify the size for these coresight components as 64K.
+	 * The actual size is just 4K though 64K is reserved. Access to the
+	 * unmapped reserved region results in a DECERR response.
+	 */
+	etf_sys0: etf@20010000 { /* etf0 */
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		in-ports {
+			port {
+				etf0_in_port: endpoint {
+					remote-endpoint = <&main_funnel_out_port>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+				etf0_out_port: endpoint {
+				};
+			};
+		};
+	};
+
+	tpiu_sys: tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		in-ports {
+			port {
+				tpiu_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+	};
+
+	/* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/
+	main_funnel: funnel@20040000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		out-ports {
+			port {
+				main_funnel_out_port: endpoint {
+					remote-endpoint = <&etf0_in_port>;
+				};
+			};
+		};
+
+		main_funnel_in_ports: in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				main_funnel_in_port0: endpoint {
+					remote-endpoint = <&cluster0_funnel_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				main_funnel_in_port1: endpoint {
+					remote-endpoint = <&cluster1_funnel_out_port>;
+				};
+			};
+		};
+	};
+
+	etr_sys: etr@20070000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20070000 0 0x1000>;
+		iommus = <&smmu_etr 0>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		arm,scatter-gather;
+		in-ports {
+			port {
+				etr_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+	};
+
+	stm_sys: stm@20100000 {
+		compatible = "arm,coresight-stm", "arm,primecell";
+		reg = <0 0x20100000 0 0x1000>,
+		      <0 0x28000000 0 0x1000000>;
+		reg-names = "stm-base", "stm-stimulus-base";
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				stm_out_port: endpoint {
+				};
+			};
+		};
+	};
+
+	replicator@20120000 {
+		compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+		reg = <0 0x20120000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+		};
+		in-ports {
+			port {
+				replicator_in_port0: endpoint {
+				};
+			};
+		};
+	};
+
+	cpu_debug0: cpu-debug@22010000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x22010000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm0: etm@22040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster0_etm0_out_port: endpoint {
+					remote-endpoint = <&cluster0_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	cti0: cti@22020000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x22020000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm0>;
+	};
+
+	funnel@220c0000 { /* cluster0 funnel */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x220c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster0_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster0_funnel_in_port0: endpoint {
+					remote-endpoint = <&cluster0_etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				cluster0_funnel_in_port1: endpoint {
+					remote-endpoint = <&cluster0_etm1_out_port>;
+				};
+			};
+		};
+	};
+
+	cpu_debug1: cpu-debug@22110000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x22110000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm1: etm@22140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster0_etm1_out_port: endpoint {
+					remote-endpoint = <&cluster0_funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	cti1: cti@22120000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x22120000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm1>;
+	};
+
+	cpu_debug2: cpu-debug@23010000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23010000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm2: etm@23040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm0_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	cti2: cti@23020000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x23020000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm2>;
+	};
+
+	funnel@230c0000 { /* cluster1 funnel */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x230c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port1>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster1_funnel_in_port0: endpoint {
+					remote-endpoint = <&cluster1_etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				cluster1_funnel_in_port1: endpoint {
+					remote-endpoint = <&cluster1_etm1_out_port>;
+				};
+			};
+			port@2 {
+				reg = <2>;
+				cluster1_funnel_in_port2: endpoint {
+					remote-endpoint = <&cluster1_etm2_out_port>;
+				};
+			};
+			port@3 {
+				reg = <3>;
+				cluster1_funnel_in_port3: endpoint {
+					remote-endpoint = <&cluster1_etm3_out_port>;
+				};
+			};
+		};
+	};
+
+	cpu_debug3: cpu-debug@23110000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23110000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm3: etm@23140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm1_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	cti3: cti@23120000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x23120000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm3>;
+	};
+
+	cpu_debug4: cpu-debug@23210000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23210000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm4: etm@23240000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23240000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm2_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	cti4: cti@23220000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x23220000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm4>;
+	};
+
+	cpu_debug5: cpu-debug@23310000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23310000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm5: etm@23340000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23340000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm3_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port3>;
+				};
+			};
+		};
+	};
+
+	cti5: cti@23320000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x23320000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm5>;
+	};
+
+	cti_sys0: cti@20020000 { /* sys_cti_0 */
+		compatible = "arm,coresight-cti", "arm,primecell";
+		reg = <0 0x20020000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		trig-conns@0 {
+			reg = <0>;
+			arm,trig-in-sigs = <2 3>;
+			arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>;
+			arm,trig-out-sigs = <0 1>;
+			arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
+			arm,cs-dev-assoc = <&etr_sys>;
+		};
+
+		trig-conns@1 {
+			reg = <1>;
+			arm,trig-in-sigs = <0 1>;
+			arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>;
+			arm,trig-out-sigs = <7 6>;
+			arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
+			arm,cs-dev-assoc = <&etf_sys0>;
+		};
+
+		trig-conns@2 {
+			reg = <2>;
+			arm,trig-in-sigs = <4 5 6 7>;
+			arm,trig-in-types = <STM_TOUT_SPTE STM_TOUT_SW
+					   STM_TOUT_HETE STM_ASYNCOUT>;
+			arm,trig-out-sigs = <4 5>;
+			arm,trig-out-types = <STM_HWEVENT STM_HWEVENT>;
+			arm,cs-dev-assoc = <&stm_sys>;
+		};
+
+		trig-conns@3 {
+			reg = <3>;
+			arm,trig-out-sigs = <2 3>;
+			arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
+			arm,cs-dev-assoc = <&tpiu_sys>;
+		};
+	};
+
+	cti_sys1: cti@20110000 { /* sys_cti_1 */
+		compatible = "arm,coresight-cti", "arm,primecell";
+		reg = <0 0x20110000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		trig-conns@0 {
+			reg = <0>;
+			arm,trig-in-sigs = <0>;
+			arm,trig-in-types = <GEN_INTREQ>;
+			arm,trig-out-sigs = <0>;
+			arm,trig-out-types = <GEN_HALTREQ>;
+			arm,trig-conn-name = "sys_profiler";
+		};
+
+		trig-conns@1 {
+			reg = <1>;
+			arm,trig-out-sigs = <2 3>;
+			arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
+			arm,trig-conn-name = "watchdog";
+		};
+
+		trig-conns@2 {
+			reg = <2>;
+			arm,trig-out-sigs = <1 6>;
+			arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
+			arm,trig-conn-name = "g_counter";
+		};
+	};
+
+	gpu: gpu@2d000000 {
+		compatible = "arm,juno-mali", "arm,mali-t624";
+		reg = <0 0x2d000000 0 0x10000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&scpi_dvfs 2>;
+		power-domains = <&scpi_devpd 1>;
+		dma-coherent;
+		/* The SMMU is only really of interest to bare-metal hypervisors */
+		/* iommus = <&smmu_gpu 0>; */
+		status = "disabled";
+	};
+
+	sram: sram@2e000000 {
+		compatible = "arm,juno-sram-ns", "mmio-sram";
+		reg = <0x0 0x2e000000 0x0 0x8000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2e000000 0x8000>;
+
+		cpu_scp_lpri: scp-sram@0 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x0 0x200>;
+		};
+
+		cpu_scp_hpri: scp-sram@200 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x200 0x200>;
+		};
+	};
+
+	pcie_ctlr: pcie@40000000 {
+		compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+		device_type = "pci";
+		reg = <0 0x40000000 0 0x10000000>;	/* ECAM config space */
+		bus-range = <0 255>;
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>,
+			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+		/* Standard AXI Translation entries as programmed by EDK2 */
+		dma-ranges = <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
+			     <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		msi-parent = <&v2m_0>;
+		status = "disabled";
+		iommu-map-mask = <0x0>;	/* RC has no means to output PCI RID */
+		iommu-map = <0x0 &smmu_pcie 0x0 0x1>;
+	};
+
+	scpi {
+		compatible = "arm,scpi";
+		mboxes = <&mailbox 1>;
+		shmem = <&cpu_scp_hpri>;
+
+		clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: clocks-0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>, <1>, <2>;
+				clock-output-names = "atlclk", "aplclk","gpuclk";
+			};
+			scpi_clk: clocks-1 {
+				compatible = "arm,scpi-variable-clocks";
+				#clock-cells = <1>;
+				clock-indices = <3>;
+				clock-output-names = "pxlclk";
+			};
+		};
+
+		scpi_devpd: power-controller {
+			compatible = "arm,scpi-power-domains";
+			num-domains = <2>;
+			#power-domain-cells = <1>;
+		};
+
+		scpi_sensors0: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		pmic {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 0>;
+			trips {
+				pmic_crit0: trip0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		soc {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 3>;
+			trips {
+				soc_crit0: trip0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		big_cluster_thermal_zone: big-cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 21>;
+			status = "disabled";
+		};
+
+		little_cluster_thermal_zone: little-cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 22>;
+			status = "disabled";
+		};
+
+		gpu0_thermal_zone: gpu0 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 23>;
+			status = "disabled";
+		};
+
+		gpu1_thermal_zone: gpu1 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 24>;
+			status = "disabled";
+		};
+	};
+
+	smmu_dma: iommu@7fb00000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb00000 0x0 0x10000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+	};
+
+	smmu_hdlcd1: iommu@7fb10000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb10000 0x0 0x10000>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+	};
+
+	smmu_hdlcd0: iommu@7fb20000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb20000 0x0 0x10000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+	};
+
+	smmu_usb: iommu@7fb30000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+	};
+
+	dma-controller@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0x7ff00000 0 0x1000>;
+		#dma-cells = <1>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_dma 0>,
+			 <&smmu_dma 1>,
+			 <&smmu_dma 2>,
+			 <&smmu_dma 3>,
+			 <&smmu_dma 4>,
+			 <&smmu_dma 5>,
+			 <&smmu_dma 6>,
+			 <&smmu_dma 7>,
+			 <&smmu_dma 8>;
+		clocks = <&soc_faxiclk>;
+		clock-names = "apb_pclk";
+	};
+
+	hdlcd@7ff50000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff50000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_hdlcd1 0>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd1_output: endpoint {
+				remote-endpoint = <&tda998x_1_input>;
+			};
+		};
+	};
+
+	hdlcd@7ff60000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff60000 0 0x1000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_hdlcd0 0>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd0_output: endpoint {
+				remote-endpoint = <&tda998x_0_input>;
+			};
+		};
+	};
+
+	soc_uart0: serial@7ff80000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0x7ff80000 0x0 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	i2c@7ffa0000 {
+		compatible = "snps,designware-i2c";
+		reg = <0x0 0x7ffa0000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <400000>;
+		i2c-sda-hold-time-ns = <500>;
+		clocks = <&soc_smc50mhz>;
+
+		hdmi-transmitter@70 {
+			compatible = "nxp,tda998x";
+			reg = <0x70>;
+			port {
+				tda998x_0_input: endpoint {
+					remote-endpoint = <&hdlcd0_output>;
+				};
+			};
+		};
+
+		hdmi-transmitter@71 {
+			compatible = "nxp,tda998x";
+			reg = <0x71>;
+			port {
+				tda998x_1_input: endpoint {
+					remote-endpoint = <&hdlcd1_output>;
+				};
+			};
+		};
+	};
+
+	usb@7ffb0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0x7ffb0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_usb 0>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	usb@7ffc0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0x7ffc0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_usb 0>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* last 16MB of the first memory area is reserved for secure world use by firmware */
+		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+		      <0x00000008 0x80000000 0x1 0x80000000>;
+	};
+
+	bus@8000000 {
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 15>;
+		interrupt-map = <0 0  0 &gic 0 GIC_SPI  68 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 GIC_SPI  69 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 GIC_SPI  70 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	site2: tlx-bus@60000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x60000000 0x10000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0>;
+		interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
new file mode 100644
index 0000000000..2870b5eeb1
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -0,0 +1,45 @@
+/*
+ * ARM Juno Platform clocks
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+/ {
+	/* SoC fixed clocks */
+	soc_uartclk: refclk7372800hz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <7372800>;
+		clock-output-names = "juno:uartclk";
+	};
+
+	soc_usb48mhz: clk48mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+		clock-output-names = "clk48mhz";
+	};
+
+	soc_smc50mhz: clk50mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "smc_clk";
+	};
+
+	soc_refclk100mhz: refclk100mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	soc_faxiclk: refclk400mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <400000000>;
+		clock-output-names = "faxi_clk";
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
new file mode 100644
index 0000000000..09d2b692e9
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	funnel@20130000 { /* cssys1 */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20130000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				csys1_funnel_out_port: endpoint {
+					remote-endpoint = <&etf1_in_port>;
+				};
+			};
+		};
+		in-ports {
+			port {
+				csys1_funnel_in_port0: endpoint {
+				};
+			};
+
+		};
+	};
+
+	etf_sys1: etf@20140000 { /* etf1 */
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		in-ports {
+			port {
+				etf1_in_port: endpoint {
+					remote-endpoint = <&csys1_funnel_out_port>;
+				};
+			};
+		};
+		out-ports {
+			port {
+				etf1_out_port: endpoint {
+					remote-endpoint = <&csys2_funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	funnel@20150000 { /* cssys2 */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20150000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				csys2_funnel_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				csys2_funnel_in_port0: endpoint {
+					remote-endpoint = <&etf0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				csys2_funnel_in_port1: endpoint {
+					remote-endpoint = <&etf1_out_port>;
+				};
+			};
+
+		};
+	};
+
+	cti_sys2: cti@20160000 { /* sys_cti_2 */
+		compatible = "arm,coresight-cti", "arm,primecell";
+		reg = <0 0x20160000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		trig-conns@0 {
+			reg = <0>;
+			arm,trig-in-sigs = <0 1>;
+			arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>;
+			arm,trig-out-sigs = <0 1>;
+			arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
+			arm,cs-dev-assoc = <&etf_sys1>;
+		};
+
+		trig-conns@1 {
+			reg = <1>;
+			arm,trig-in-sigs = <2 3 4>;
+			arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
+			arm,trig-conn-name = "ela_clus_0";
+		};
+
+		trig-conns@2 {
+			reg = <2>;
+			arm,trig-in-sigs = <5 6 7>;
+			arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
+			arm,trig-conn-name = "ela_clus_1";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
new file mode 100644
index 0000000000..be42932f7e
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -0,0 +1,313 @@
+/*
+ * ARM Juno Platform motherboard peripherals
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+
+/ {
+	mb_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "juno_mb:clk24mhz";
+	};
+
+	mb_clk25mhz: clk25mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "juno_mb:clk25mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "juno_mb:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "juno_mb:refclk32khz";
+	};
+
+	mb_fixed_3v3: mcc-sb-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MCC_SB_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <116>;
+			label = "POWER";
+			gpios = <&iofpga_gpio0 0 0x4>;
+		};
+		home-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <102>;
+			label = "HOME";
+			gpios = <&iofpga_gpio0 1 0x4>;
+		};
+		rlock-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <152>;
+			label = "RLOCK";
+			gpios = <&iofpga_gpio0 2 0x4>;
+		};
+		vol-up-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <115>;
+			label = "VOL+";
+			gpios = <&iofpga_gpio0 3 0x4>;
+		};
+		vol-down-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <114>;
+			label = "VOL-";
+			gpios = <&iofpga_gpio0 4 0x4>;
+		};
+		nmi-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <99>;
+			label = "NMI";
+			gpios = <&iofpga_gpio0 5 0x4>;
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+		motherboard-bus@8000000 {
+			compatible = "arm,vexpress,v2p-p1", "simple-bus";
+			#address-cells = <2>;  /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0 0x08000000 0x04000000>,
+				 <1 0 0 0x14000000 0x04000000>,
+				 <2 0 0 0x18000000 0x04000000>,
+				 <3 0 0 0x1c000000 0x04000000>,
+				 <4 0 0 0x0c000000 0x04000000>,
+				 <5 0 0 0x10000000 0x04000000>;
+			arm,hbi = <0x252>;
+			arm,vexpress,site = <0>;
+
+			flash@0 {
+				/* 2 * 32MiB NOR Flash memory mounted on CS0 */
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>;
+				bank-width = <4>;
+				/*
+				 * Unfortunately, accessing the flash disturbs
+				 * the CPU idle states (suspend) and CPU
+				 * hotplug of the platform. For this reason,
+				 * flash hardware access is disabled by default.
+				 */
+				status = "disabled";
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			ethernet@200000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x00000000 0x10000>;
+				interrupts = <3>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				clocks = <&mb_clk25mhz>;
+				vdd33a-supply = <&mb_fixed_3v3>;
+				vddvario-supply = <&mb_fixed_3v3>;
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				apbregs@10000 {
+					compatible = "syscon", "simple-mfd";
+					reg = <0x010000 0x1000>;
+					ranges = <0x0 0x10000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					led@8,0 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x01>;
+						label = "vexpress:0";
+						linux,default-trigger = "heartbeat";
+						default-state = "on";
+					};
+					led@8,1 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x02>;
+						label = "vexpress:1";
+						linux,default-trigger = "mmc0";
+						default-state = "off";
+					};
+					led@8,2 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x04>;
+						label = "vexpress:2";
+						linux,default-trigger = "cpu0";
+						default-state = "off";
+					};
+					led@8,3 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x08>;
+						label = "vexpress:3";
+						linux,default-trigger = "cpu1";
+						default-state = "off";
+					};
+					led@8,4 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x10>;
+						label = "vexpress:4";
+						linux,default-trigger = "cpu2";
+						default-state = "off";
+					};
+					led@8,5 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x20>;
+						label = "vexpress:5";
+						linux,default-trigger = "cpu3";
+						default-state = "off";
+					};
+					led@8,6 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x40>;
+						label = "vexpress:6";
+						default-state = "off";
+					};
+					led@8,7 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x80>;
+						label = "vexpress:7";
+						default-state = "off";
+					};
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <5>;
+					/* cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>; */
+					max-frequency = <12000000>;
+					vmmc-supply = <&mb_fixed_3v3>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <8>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <8>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x10000>;
+					interrupts = <7>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x10000>;
+					interrupts = <9>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x10000>;
+					interrupts = <9>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x10000>;
+					interrupts = <0>;
+					clocks = <&soc_smc50mhz>;
+					clock-names = "apb_pclk";
+				};
+
+				iofpga_gpio0: gpio@1d0000 {
+					compatible = "arm,pl061", "arm,primecell";
+					reg = <0x1d0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&soc_smc50mhz>;
+					clock-names = "apb_pclk";
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r1-scmi.dts b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts
new file mode 100644
index 0000000000..dd9ea69f08
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts
@@ -0,0 +1,27 @@
+#include "juno-r1.dts"
+#include "juno-scmi.dtsi"
+
+/ {
+	funnel@20130000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	etf@20140000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@20150000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+};
+
+&cti_sys2 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&A57_0 {
+	clocks = <&scmi_dvfs 0>;
+};
+&A57_1 {
+	clocks = <&scmi_dvfs 0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
new file mode 100644
index 0000000000..1d90eeebb3
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -0,0 +1,344 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include "juno-base.dtsi"
+#include "juno-cs-r1r2.dtsi"
+
+/ {
+	model = "ARM Juno development board (r1)";
+	compatible = "arm,juno-r1", "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A57_0>;
+				};
+				core1 {
+					cpu = <&A57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
+		A57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		A57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+		};
+
+		A57_L2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	pmu-a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>;
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A53_0>,
+				     <&A53_1>,
+				     <&A53_2>,
+				     <&A53_3>;
+	};
+};
+
+&memtimer {
+	status = "okay";
+};
+
+&pcie_ctlr {
+	status = "okay";
+};
+
+&smmu_pcie {
+	status = "okay";
+};
+
+&etm0 {
+	cpu = <&A57_0>;
+};
+
+&etm1 {
+	cpu = <&A57_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&big_cluster_thermal_zone {
+	status = "okay";
+};
+
+&little_cluster_thermal_zone {
+	status = "okay";
+};
+
+&gpu0_thermal_zone {
+	status = "okay";
+};
+
+&gpu1_thermal_zone {
+	status = "okay";
+};
+
+&etf0_out_port {
+	remote-endpoint = <&csys2_funnel_in_port0>;
+};
+
+&replicator_in_port0 {
+	remote-endpoint = <&csys2_funnel_out_port>;
+};
+
+&csys1_funnel_in_port0 {
+	remote-endpoint = <&stm_out_port>;
+};
+
+&stm_out_port {
+	remote-endpoint = <&csys1_funnel_in_port0>;
+};
+
+&cpu_debug0 {
+	cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};
+
+&cti0 {
+	cpu = <&A57_0>;
+};
+
+&cti1 {
+	cpu = <&A57_1>;
+};
+
+&cti2 {
+	cpu = <&A53_0>;
+};
+
+&cti3 {
+	cpu = <&A53_1>;
+};
+
+&cti4 {
+	cpu = <&A53_2>;
+};
+
+&cti5 {
+	cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2-scmi.dts b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts
new file mode 100644
index 0000000000..de2cbac1d1
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts
@@ -0,0 +1,27 @@
+#include "juno-r2.dts"
+#include "juno-scmi.dtsi"
+
+/ {
+	funnel@20130000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	etf@20140000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@20150000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+};
+
+&cti_sys2 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&A72_0 {
+	clocks = <&scmi_dvfs 0>;
+};
+&A72_1 {
+	clocks = <&scmi_dvfs 0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
new file mode 100644
index 0000000000..d2ada69b0a
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -0,0 +1,350 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include "juno-base.dtsi"
+#include "juno-cs-r1r2.dtsi"
+
+/ {
+	model = "ARM Juno development board (r2)";
+	compatible = "arm,juno-r2", "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A72_0>;
+				};
+				core1 {
+					cpu = <&A72_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
+		A72_0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A72_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <450>;
+		};
+
+		A72_1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A72_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <450>;
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A72_L2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	pmu-a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A72_0>,
+				     <&A72_1>;
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A53_0>,
+				     <&A53_1>,
+				     <&A53_2>,
+				     <&A53_3>;
+	};
+};
+
+&memtimer {
+	status = "okay";
+};
+
+&pcie_ctlr {
+	status = "okay";
+};
+
+&smmu_pcie {
+	status = "okay";
+};
+
+&etm0 {
+	cpu = <&A72_0>;
+};
+
+&etm1 {
+	cpu = <&A72_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&big_cluster_thermal_zone {
+	status = "okay";
+};
+
+&little_cluster_thermal_zone {
+	status = "okay";
+};
+
+&gpu0_thermal_zone {
+	status = "okay";
+};
+
+&gpu1_thermal_zone {
+	status = "okay";
+};
+
+&etf0_out_port {
+	remote-endpoint = <&csys2_funnel_in_port0>;
+};
+
+&replicator_in_port0 {
+	remote-endpoint = <&csys2_funnel_out_port>;
+};
+
+&csys1_funnel_in_port0 {
+	remote-endpoint = <&stm_out_port>;
+};
+
+&stm_out_port {
+	remote-endpoint = <&csys1_funnel_in_port0>;
+};
+
+&cpu_debug0 {
+	cpu = <&A72_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A72_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};
+
+&cti0 {
+	cpu = <&A72_0>;
+};
+
+&cti1 {
+	cpu = <&A72_1>;
+};
+
+&cti2 {
+	cpu = <&A53_0>;
+};
+
+&cti3 {
+	cpu = <&A53_1>;
+};
+
+&cti4 {
+	cpu = <&A53_2>;
+};
+
+&cti5 {
+	cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dts b/arch/arm64/boot/dts/arm/juno-scmi.dts
new file mode 100644
index 0000000000..41588fa46d
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dts
@@ -0,0 +1,9 @@
+#include "juno.dts"
+#include "juno-scmi.dtsi"
+
+&A57_0 {
+	clocks = <&scmi_dvfs 0>;
+};
+&A57_1 {
+	clocks = <&scmi_dvfs 0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
new file mode 100644
index 0000000000..ec85cd2c73
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -0,0 +1,223 @@
+/ {
+	etf@20010000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	tpiu@20030000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@20040000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	etr@20070000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	stm@20100000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	replicator@20120000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@220c0000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@230c0000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	hdlcd@7ff50000 {
+		clocks = <&scmi_clk 3>;
+	};
+
+	hdlcd@7ff60000 {
+		clocks = <&scmi_clk 3>;
+	};
+
+	/delete-node/ scpi;
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			mbox-names = "tx", "rx";
+			mboxes = <&mailbox 0 0 &mailbox 0 1>;
+			shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_dvfs: protocol@13 {
+				reg = <0x13>;
+				#clock-cells = <1>;
+				mbox-names = "tx", "rx";
+				mboxes = <&mailbox 1 0 &mailbox 1 1>;
+				shmem = <&cpu_scp_hpri0 &cpu_scp_hpri1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_sensors0: protocol@15 {
+				reg = <0x15>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+	};
+
+	thermal-zones {
+		pmic {
+			thermal-sensors = <&scmi_sensors0 0>;
+		};
+
+		soc {
+			thermal-sensors = <&scmi_sensors0 3>;
+		};
+
+		big-cluster {
+			thermal-sensors = <&scmi_sensors0 21>;
+		};
+
+		little-cluster {
+			thermal-sensors = <&scmi_sensors0 22>;
+		};
+
+		gpu0 {
+			thermal-sensors = <&scmi_sensors0 23>;
+		};
+
+		gpu1 {
+			thermal-sensors = <&scmi_sensors0 24>;
+		};
+	};
+
+};
+
+&A53_0 {
+	clocks = <&scmi_dvfs 1>;
+};
+&A53_1 {
+	clocks = <&scmi_dvfs 1>;
+};
+&A53_2 {
+	clocks = <&scmi_dvfs 1>;
+};
+&A53_3 {
+	clocks = <&scmi_dvfs 1>;
+};
+
+&cpu_debug0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug1 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug2 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug3 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug4 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug5 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&etm0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm1 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm2 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm3 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm4 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm5 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&cti0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti1 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti2 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti3 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti4 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti5 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti_sys0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti_sys1 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&gpu {
+	clocks = <&scmi_dvfs 2>;
+	power-domains = <&scmi_devpd 9>;
+};
+
+&mailbox {
+	compatible = "arm,mhu-doorbell", "arm,primecell";
+	#mbox-cells = <2>;
+};
+
+&smmu_etr {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&smmu_gpu {
+	power-domains = <&scmi_devpd 9>;
+};
+
+&sram {
+	/delete-node/ scp-sram@0;
+	/delete-node/ scp-sram@200;
+
+	cpu_scp_lpri0: scp-sram@0 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x0 0x80>;
+	};
+
+	cpu_scp_lpri1: scp-sram@80 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x80 0x80>;
+	};
+
+	cpu_scp_hpri0: scp-sram@100 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x100 0x80>;
+	};
+
+	cpu_scp_hpri1: scp-sram@180 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x180 0x80>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
new file mode 100644
index 0000000000..5e48a01a5b
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -0,0 +1,326 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2013-2014 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include "juno-base.dtsi"
+
+/ {
+	model = "ARM Juno development board (r0)";
+	compatible = "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A57_0>;
+				};
+				core1 {
+					cpu = <&A57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
+		A57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <530>;
+		};
+
+		A57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <530>;
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A57_L2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	pmu-a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>;
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A53_0>,
+				     <&A53_1>,
+				     <&A53_2>,
+				     <&A53_3>;
+	};
+};
+
+&etm0 {
+	cpu = <&A57_0>;
+};
+
+&etm1 {
+	cpu = <&A57_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&etf0_out_port {
+	remote-endpoint = <&replicator_in_port0>;
+};
+
+&replicator_in_port0 {
+	remote-endpoint = <&etf0_out_port>;
+};
+
+&stm_out_port {
+	remote-endpoint = <&main_funnel_in_port2>;
+};
+
+&main_funnel_in_ports {
+	port@2 {
+		reg = <2>;
+		main_funnel_in_port2: endpoint {
+			remote-endpoint = <&stm_out_port>;
+		};
+	};
+};
+
+&cpu_debug0 {
+	cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};
+
+&cti0 {
+	cpu = <&A57_0>;
+};
+
+&cti1 {
+	cpu = <&A57_1>;
+};
+
+&cti2 {
+	cpu = <&A53_0>;
+};
+
+&cti3 {
+	cpu = <&A53_1>;
+};
+
+&cti4 {
+	cpu = <&A53_2>;
+};
+
+&cti5 {
+	cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
new file mode 100644
index 0000000000..afdf954206
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+#include "rtsm_ve-motherboard.dtsi"
+
+/ {
+	model = "RTSM_VE_AEMv8A";
+	compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2,00000000 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x00000000 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x2c001000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x2000>,
+		      <0x0 0x2c004000 0 0x2000>,
+		      <0x0 0x2c006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	panel {
+		compatible = "arm,rtsm-display";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+
+	bus@8000000 {
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
new file mode 100644
index 0000000000..ec2d5280a3
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Fast Models
+ *
+ * "rs2" extension for the v2m motherboard
+ */
+/ {
+	bus@8000000 {
+		motherboard-bus@8000000 {
+			arm,v2m-memory-map = "rs2";
+
+			iofpga-bus@300000000 {
+				virtio@140000 {
+					compatible = "virtio,mmio";
+					reg = <0x140000 0x200>;
+					interrupts = <43>;
+				};
+
+				virtio@150000 {
+					compatible = "virtio,mmio";
+					reg = <0x150000 0x200>;
+					interrupts = <44>;
+				};
+
+				virtio@200000 {
+					compatible = "virtio,mmio";
+					reg = <0x200000 0x200>;
+					interrupts = <46>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
new file mode 100644
index 0000000000..ba8beef3fe
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Versatile Express (VE) system model
+ * Motherboard component
+ *
+ * VEMotherBoard.lisa
+ */
+/ {
+	v2m_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	v2m_fixed_3v3: v2m-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	mcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		v2m_oscclk1: oscclk1 {
+			/* CLCD clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <23750000 63500000>;
+			#clock-cells = <0>;
+			clock-output-names = "v2m:oscclk1";
+		};
+
+		reset {
+			compatible = "arm,vexpress-reset";
+			arm,vexpress-sysreg,func = <5 0>;
+		};
+
+		muxfpga {
+			compatible = "arm,vexpress-muxfpga";
+			arm,vexpress-sysreg,func = <7 0>;
+		};
+
+		shutdown {
+			compatible = "arm,vexpress-shutdown";
+			arm,vexpress-sysreg,func = <8 0>;
+		};
+
+		reboot {
+			compatible = "arm,vexpress-reboot";
+			arm,vexpress-sysreg,func = <9 0>;
+		};
+
+		dvimode {
+			compatible = "arm,vexpress-dvimode";
+			arm,vexpress-sysreg,func = <11 0>;
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+		motherboard-bus@8000000 {
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0 0x08000000 0x04000000>,
+				 <1 0 0 0x14000000 0x04000000>,
+				 <2 0 0 0x18000000 0x04000000>,
+				 <3 0 0 0x1c000000 0x04000000>,
+				 <4 0 0 0x0c000000 0x04000000>,
+				 <5 0 0 0x10000000 0x04000000>;
+
+			flash@0 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@202000000 {
+				compatible = "smsc,lan91c111";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x210000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&v2m_clk24mhz>;
+					clock-names = "apb_pclk";
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_sysreg 0 0>;
+					wp-gpios = <&v2m_sysreg 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				virtio@130000 {
+					compatible = "virtio,mmio";
+					reg = <0x130000 0x200>;
+					interrupts = <42>;
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&v2m_clk24mhz>;
+					clock-names = "apb_pclk";
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+					clock-names = "clcdclk", "apb_pclk";
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&panel_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
new file mode 100644
index 0000000000..8db4243a49
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * LogicTile Express 20MG
+ * V2F-1XV7
+ *
+ * Cortex-A53 (2 cores) Soft Macrocell Model
+ *
+ * HBI-0247C
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "arm/arm/vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2F-1XV7 Cortex-A53x2 SMM";
+	arm,hbi = <0x247>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		stdout-path = "serial0:38400n8";
+	};
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		smbclk: smclk {
+			/* SMC clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "smclk";
+		};
+
+		volt-vio {
+			/* VIO to expansion board above */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VIO_UP";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		volt-12v {
+			/* 12V from power connector J6 */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "12";
+			regulator-always-on;
+		};
+
+		temp-fpga {
+			/* FPGA temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "FPGA";
+		};
+	};
+
+	smb: bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/bitmain/Makefile b/arch/arm64/boot/dts/bitmain/Makefile
new file mode 100644
index 0000000000..be90a6071b
--- /dev/null
+++ b/arch/arm64/boot/dts/bitmain/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_ARCH_BITMAIN) += bm1880-sophon-edge.dtb
diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
new file mode 100644
index 0000000000..7a2c7f9c26
--- /dev/null
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "bm1880.dtsi"
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "sophon-edge-schematics"
+ * version, 1.0210.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+/ {
+	compatible = "bitmain,sophon-edge", "bitmain,bm1880";
+	model = "Sophon Edge";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
+	};
+
+	soc {
+		gpio0: gpio@50027000 {
+			porta: gpio-controller@0 {
+				gpio-line-names =
+					"GPIO-A", /* GPIO0, LSEC pin 23 */
+					"GPIO-C", /* GPIO1, LSEC pin 25 */
+					"[GPIO2_PHY0_RST]", /* GPIO2 */
+					"GPIO-E", /* GPIO3, LSEC pin 27 */
+					"[USB_DET]", /* GPIO4 */
+					"[EN_P5V]", /* GPIO5 */
+					"[VDDIO_MS1_SEL]", /* GPIO6 */
+					"GPIO-G", /* GPIO7, LSEC pin 29 */
+					"[BM_TUSB_RST_L]", /* GPIO8 */
+					"[EN_P5V_USBHUB]", /* GPIO9 */
+					"NC",
+					"LED_WIFI", /* GPIO11 */
+					"LED_BT", /* GPIO12 */
+					"[BM_BLM8221_EN_L]", /* GPIO13 */
+					"NC", /* GPIO14 */
+					"NC", /* GPIO15 */
+					"NC", /* GPIO16 */
+					"NC", /* GPIO17 */
+					"NC", /* GPIO18 */
+					"NC", /* GPIO19 */
+					"NC", /* GPIO20 */
+					"NC", /* GPIO21 */
+					"NC", /* GPIO22 */
+					"NC", /* GPIO23 */
+					"NC", /* GPIO24 */
+					"NC", /* GPIO25 */
+					"NC", /* GPIO26 */
+					"NC", /* GPIO27 */
+					"NC", /* GPIO28 */
+					"NC", /* GPIO29 */
+					"NC", /* GPIO30 */
+					"NC"; /* GPIO31 */
+			};
+		};
+
+		gpio1: gpio@50027400 {
+			portb: gpio-controller@0 {
+				gpio-line-names =
+					"NC", /* GPIO32 */
+					"NC", /* GPIO33 */
+					"[I2C0_SDA]", /* GPIO34, LSEC pin 17 */
+					"[I2C0_SCL]", /* GPIO35, LSEC pin 15 */
+					"[JTAG0_TDO]", /* GPIO36 */
+					"[JTAG0_TCK]", /* GPIO37 */
+					"[JTAG0_TDI]", /* GPIO38 */
+					"[JTAG0_TMS]", /* GPIO39 */
+					"[JTAG0_TRST_X]", /* GPIO40 */
+					"[JTAG1_TDO]", /* GPIO41 */
+					"[JTAG1_TCK]", /* GPIO42 */
+					"[JTAG1_TDI]", /* GPIO43 */
+					"[CPU_TX]", /* GPIO44 */
+					"[CPU_RX]", /* GPIO45 */
+					"[UART1_TXD]", /* GPIO46 */
+					"[UART1_RXD]", /* GPIO47 */
+					"[UART0_TXD]", /* GPIO48 */
+					"[UART0_RXD]", /* GPIO49 */
+					"GPIO-I", /* GPIO50, LSEC pin 31 */
+					"GPIO-K", /* GPIO51, LSEC pin 33 */
+					"USER_LED2", /* GPIO52 */
+					"USER_LED1", /* GPIO53 */
+					"[UART0_RTS]", /* GPIO54 */
+					"[UART0_CTS]", /* GPIO55 */
+					"USER_LED4", /* GPIO56, JTAG1_TRST_X */
+					"USER_LED3", /* GPIO57, JTAG1_TMS */
+					"[I2S0_SCLK]", /* GPIO58 */
+					"[I2S0_FS]", /* GPIO59 */
+					"[I2S0_SDI]", /* GPIO60 */
+					"[I2S0_SDO]", /* GPIO61 */
+					"GPIO-B", /* GPIO62, LSEC pin 24 */
+					"GPIO-F"; /* GPIO63, I2S1_SCLK, LSEC pin 28 */
+			};
+		};
+
+		gpio2: gpio@50027800 {
+			portc: gpio-controller@0 {
+				gpio-line-names =
+					"GPIO-D", /* GPIO64, I2S1_FS, LSEC pin 26 */
+					"GPIO-J", /* GPIO65, I2S1_SDI, LSEC pin 32 */
+					"GPIO-H", /* GPIO66, I2S1_SDO, LSEC pin 30 */
+					"GPIO-L", /* GPIO67, LSEC pin 34 */
+					"[SPI0_CS]", /* GPIO68, SPI1_CS, LSEC pin 12 */
+					"[SPI0_DIN]", /* GPIO69, SPI1_SDI, LSEC pin 10 */
+					"[SPI0_DOUT]", /* GPIO70, SPI1_SDO, LSEC pin 14 */
+					"[SPI0_SCLK]"; /* GPIO71, SPI1_SCK, LSEC pin 8 */
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl_uart0_default: pinctrl-uart0-default {
+		pinmux {
+			groups = "uart0_grp";
+			function = "uart0";
+		};
+	};
+
+	pinctrl_uart1_default: pinctrl-uart1-default {
+		pinmux {
+			groups = "uart1_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_uart2_default: pinctrl-uart2-default {
+		pinmux {
+			groups = "uart2_grp";
+			function = "uart2";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_default>;
+};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
new file mode 100644
index 0000000000..53a9b76057
--- /dev/null
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <dt-bindings/clock/bm1880-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/bitmain,bm1880-reset.h>
+
+/ {
+	compatible = "bitmain,bm1880";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@100000000 {
+			reg = <0x1 0x00000000 0x0 0x20000>;
+			no-map;
+		};
+
+		jpu@130000000 {
+			reg = <0x1 0x30000000 0x0 0x08000000>; // 128M
+			no-map;
+		};
+
+		vpu@138000000 {
+			reg = <0x1 0x38000000 0x0 0x08000000>; // 128M
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	osc: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@50001000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0x50001000 0x0 0x1000>,
+			      <0x0 0x50002000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		sctrl: system-controller@50010000 {
+			compatible = "bitmain,bm1880-sctrl", "syscon",
+				     "simple-mfd";
+			reg = <0x0 0x50010000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x50010000 0x1000>;
+
+			pinctrl: pinctrl@400 {
+				compatible = "bitmain,bm1880-pinctrl";
+				reg = <0x400 0x120>;
+			};
+
+			clk: clock-controller@e8 {
+				compatible = "bitmain,bm1880-clk";
+				reg = <0xe8 0x0c>, <0x800 0xb0>;
+				reg-names = "pll", "sys";
+				clocks = <&osc>;
+				clock-names = "osc";
+				#clock-cells = <1>;
+			};
+
+			rst: reset-controller@c00 {
+				compatible = "bitmain,bm1880-reset";
+				reg = <0xc00 0x8>;
+				#reset-cells = <1>;
+			};
+		};
+
+		gpio0: gpio@50027000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027000 0x0 0x400>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@50027400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027400 0x0 0x400>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@50027800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027800 0x0 0x400>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@58018000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x58018000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART0_1_CLK>;
+			status = "disabled";
+		};
+
+		uart1: serial@5801A000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x5801a000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART0_1_ACLK>;
+			status = "disabled";
+		};
+
+		uart2: serial@5801C000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x5801c000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART2_3_CLK>;
+			status = "disabled";
+		};
+
+		uart3: serial@5801E000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x5801e000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART2_3_ACLK>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
new file mode 100644
index 0000000000..8b4591ddd2
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Enables support for device-tree overlays
+DTC_FLAGS := -@
+
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
+			      bcm2711-rpi-4-b.dtb \
+			      bcm2711-rpi-cm4-io.dtb \
+			      bcm2837-rpi-3-a-plus.dtb \
+			      bcm2837-rpi-3-b.dtb \
+			      bcm2837-rpi-3-b-plus.dtb \
+			      bcm2837-rpi-cm3-io3.dtb \
+			      bcm2837-rpi-zero-2-w.dtb
+
+subdir-y	+= bcmbca
+subdir-y	+= northstar2
+subdir-y	+= stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
new file mode 100644
index 0000000000..c7280bdefa
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2711-rpi-4-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
new file mode 100644
index 0000000000..d9d2852b79
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2711-rpi-400.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 0000000000..8810322aa6
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2711-rpi-cm4-io.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
new file mode 100644
index 0000000000..17d778a7e0
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-3-a-plus.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 0000000000..0cf6240b6b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-3-b-plus.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
new file mode 100644
index 0000000000..f429468fd8
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-3-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 0000000000..3fa21bd16b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-cm3-io3.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 0000000000..363381a0cf
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-zero-2-w.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
new file mode 100644
index 0000000000..27741b71ba
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+				bcm4906-netgear-r8000p.dtb \
+				bcm4906-tplink-archer-c2300-v1.dtb \
+				bcm4908-asus-gt-ac5300.dtb \
+				bcm4908-netgear-raxe500.dtb \
+				bcm94908.dtb \
+				bcm4912-asus-gt-ax6000.dtb \
+				bcm94912.dtb \
+				bcm963158.dtb \
+				bcm96858.dtb \
+				bcm963146.dtb \
+				bcm96856.dtb \
+				bcm96813.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
new file mode 100644
index 0000000000..78204d71ec
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4906.dtsi"
+
+/ {
+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Netgear R8000P";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			function = "2ghz";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz-1 {
+			function = "5ghz-1";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz-2 {
+			function = "5ghz-2";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			function = "usb2";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			function = "usb3";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wifi {
+			function = "wifi";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&enet {
+	nvmem-cells = <&base_mac_addr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan4";
+	};
+
+	port@1 {
+		label = "lan3";
+	};
+
+	port@2 {
+		label = "lan2";
+	};
+
+	port@3 {
+		label = "lan1";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			compatible = "nvmem-cells";
+			label = "cferom";
+			reg = <0x0 0x100000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x100000>;
+
+			base_mac_addr: mac@106a0 {
+				reg = <0x106a0 0x6>;
+			};
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			label = "firmware";
+			reg = <0x100000 0x4400000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
new file mode 100644
index 0000000000..fcf092c81b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4906.dtsi"
+
+/ {
+	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
+	model = "TP-Link Archer C2300 V1";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			function = "2ghz";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			function = "5ghz";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-blue {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			function = "usb2";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			function = "usb3";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-brightness {
+			function = LED_FUNCTION_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		key-brightness {
+			label = "LEDs";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+		key-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		key-wifi {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan4";
+	};
+
+	port@1 {
+		label = "lan3";
+	};
+
+	port@2 {
+		label = "lan2";
+	};
+
+	port@3 {
+		label = "lan1";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "brcm,bcm4908-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "cferom";
+			reg = <0x0 0x100000>;
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x100000 0x3900000>;
+		};
+
+		partition@5800000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x3a00000 0x3900000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
new file mode 100644
index 0000000000..d084c33d5c
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "bcm4908.dtsi"
+
+/ {
+	cpus {
+		/delete-node/ cpu@2;
+
+		/delete-node/ cpu@3;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
new file mode 100644
index 0000000000..d94a53d683
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4908.dtsi"
+
+/ {
+	compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Asus GT-AC5300";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		key-wifi {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		key-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+		};
+
+		key-brightness {
+			label = "LEDs";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&enet {
+	nvmem-cells = <&base_mac_addr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan2";
+	};
+
+	port@1 {
+		label = "lan1";
+	};
+
+	port@2 {
+		label = "lan6";
+	};
+
+	port@3 {
+		label = "lan5";
+	};
+
+	/* External BCM53134S switch */
+	port@7 {
+		label = "sw";
+		reg = <7>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+		};
+	};
+};
+
+&mdio {
+	/* lan8 */
+	ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	/* lan7 */
+	ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	/* lan4 */
+	ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	/* lan3 */
+	ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&leds {
+	led@11 {
+		reg = <0x11>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_WHITE>;
+		default-state = "on";
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_17_a>;
+	};
+
+	led@12 {
+		reg = <0x12>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_RED>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_18_a>;
+	};
+
+	led@14 {
+		reg = <0x14>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_WHITE>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_20_a>;
+	};
+
+	led@15 {
+		reg = <0x15>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_WHITE>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_21_a>;
+	};
+
+	led@19 {
+		reg = <0x19>;
+		function = LED_FUNCTION_LAN;
+		color = <LED_COLOR_ID_WHITE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_25_a>;
+	};
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+	brcm,nand-has-wp;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "brcm,bcm4908-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			compatible = "nvmem-cells";
+			label = "cferom";
+			reg = <0x0 0x100000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x100000>;
+
+			base_mac_addr: mac@106a0 {
+				reg = <0x106a0 0x6>;
+			};
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x100000 0x5700000>;
+		};
+
+		partition@5800000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x5800000 0x5700000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
new file mode 100644
index 0000000000..23b96c6632
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "bcm4908.dtsi"
+
+/ {
+	compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Netgear RAXE500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan4";
+	};
+
+	port@1 {
+		label = "lan3";
+	};
+
+	port@2 {
+		label = "lan2";
+	};
+
+	port@3 {
+		label = "lan1";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
new file mode 100644
index 0000000000..2f124b027b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/soc/bcm-pmb.h>
+
+/dts-v1/;
+
+/ {
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x81000000 0x4000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x2000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	clocks {
+		periph_clk: periph_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x80000000 0x281000>;
+
+		enet: ethernet@2000 {
+			compatible = "brcm,bcm4908-enet";
+			reg = <0x2000 0x1000>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "rx", "tx";
+		};
+
+		usb_phy: usb-phy@c200 {
+			compatible = "brcm,bcm4908-usb-phy";
+			reg = <0xc200 0x100>;
+			reg-names = "ctrl";
+			power-domains = <&pmb BCM_PMB_HOST_USB>;
+			dr_mode = "host";
+			brcm,has-xhci;
+			brcm,has-eohci;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ehci: usb@c300 {
+			compatible = "generic-ehci";
+			reg = <0xc300 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb_phy PHY_TYPE_USB2>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ehci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			ehci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+		};
+
+		ohci: usb@c400 {
+			compatible = "generic-ohci";
+			reg = <0xc400 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb_phy PHY_TYPE_USB2>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ohci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			ohci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+		};
+
+		xhci: usb@d000 {
+			compatible = "generic-xhci";
+			reg = <0xd000 0x8c8>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb_phy PHY_TYPE_USB3>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xhci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			xhci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+		};
+
+		bus@80000 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0 0x80000 0x50000>;
+
+			ethernet-switch@0 {
+				compatible = "brcm,bcm4908-switch";
+				reg = <0x0 0x40000>,
+				      <0x40000 0x110>,
+				      <0x40340 0x30>,
+				      <0x40380 0x30>,
+				      <0x40600 0x34>,
+				      <0x40800 0x208>;
+				reg-names = "core", "reg", "intrl2_0",
+					    "intrl2_1", "fcb", "acb";
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				brcm,num-gphy = <5>;
+				brcm,num-rgmii-ports = <2>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports: ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						phy-mode = "internal";
+						phy-handle = <&phy8>;
+					};
+
+					port@1 {
+						reg = <1>;
+						phy-mode = "internal";
+						phy-handle = <&phy9>;
+					};
+
+					port@2 {
+						reg = <2>;
+						phy-mode = "internal";
+						phy-handle = <&phy10>;
+					};
+
+					port@3 {
+						reg = <3>;
+						phy-mode = "internal";
+						phy-handle = <&phy11>;
+					};
+
+					port@8 {
+						reg = <8>;
+						phy-mode = "internal";
+						ethernet = <&enet>;
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+
+			mdio: mdio@405c0 {
+				compatible = "brcm,unimac-mdio";
+				reg = <0x405c0 0x8>;
+				reg-names = "mdio";
+				#size-cells = <0>;
+				#address-cells = <1>;
+
+				phy8: ethernet-phy@8 {
+					reg = <8>;
+				};
+
+				phy9: ethernet-phy@9 {
+					reg = <9>;
+				};
+
+				phy10: ethernet-phy@a {
+					reg = <10>;
+				};
+
+				phy11: ethernet-phy@b {
+					reg = <11>;
+				};
+
+				phy12: ethernet-phy@c {
+					reg = <12>;
+				};
+			};
+		};
+
+		procmon: bus@280000 {
+			compatible = "simple-bus";
+			reg = <0x280000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pmb: power-controller@2800c0 {
+				compatible = "brcm,bcm4908-pmb";
+				reg = <0x2800c0 0x40>;
+				#power-domain-cells = <1>;
+			};
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0xff800000 0x3000>;
+
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
+			ranges = <0x0 0x400 0x4c>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
+			watchdog@28 {
+				compatible = "brcm,bcm6345-wdt";
+				reg = <0x28 0x8>;
+			};
+		};
+
+		gpio0: gpio-controller@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg-names = "dirout", "dat";
+			reg = <0x500 0x28>, <0x528 0x28>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		pinctrl@560 {
+			compatible = "brcm,bcm4908-pinctrl";
+			reg = <0x560 0x10>;
+
+			pins_led_0_a: led_0-a-pins {
+				function = "led_0";
+				groups = "led_0_grp_a";
+			};
+
+			pins_led_1_a: led_1-a-pins {
+				function = "led_1";
+				groups = "led_1_grp_a";
+			};
+
+			pins_led_2_a: led_2-a-pins {
+				function = "led_2";
+				groups = "led_2_grp_a";
+			};
+
+			pins_led_3_a: led_3-a-pins {
+				function = "led_3";
+				groups = "led_3_grp_a";
+			};
+
+			pins_led_4_a: led_4-a-pins {
+				function = "led_4";
+				groups = "led_4_grp_a";
+			};
+
+			pins_led_5_a: led_5-a-pins {
+				function = "led_5";
+				groups = "led_5_grp_a";
+			};
+
+			pins_led_6_a: led_6-a-pins {
+				function = "led_6";
+				groups = "led_6_grp_a";
+			};
+
+			pins_led_7_a: led_7-a-pins {
+				function = "led_7";
+				groups = "led_7_grp_a";
+			};
+
+			pins_led_8_a: led_8-a-pins {
+				function = "led_8";
+				groups = "led_8_grp_a";
+			};
+
+			pins_led_9_a: led_9-a-pins {
+				function = "led_9";
+				groups = "led_9_grp_a";
+			};
+
+			pins_led_10_a: led_10-a-pins {
+				function = "led_10";
+				groups = "led_10_grp_a";
+			};
+
+			pins_led_11_a: led_11-a-pins {
+				function = "led_11";
+				groups = "led_11_grp_a";
+			};
+
+			pins_led_12_a: led_12-a-pins {
+				function = "led_12";
+				groups = "led_12_grp_a";
+			};
+
+			pins_led_13_a: led_13-a-pins {
+				function = "led_13";
+				groups = "led_13_grp_a";
+			};
+
+			pins_led_14_a: led_14-a-pins {
+				function = "led_14";
+				groups = "led_14_grp_a";
+			};
+
+			pins_led_15_a: led_15-a-pins {
+				function = "led_15";
+				groups = "led_15_grp_a";
+			};
+
+			pins_led_16_a: led_16-a-pins {
+				function = "led_16";
+				groups = "led_16_grp_a";
+			};
+
+			pins_led_17_a: led_17-a-pins {
+				function = "led_17";
+				groups = "led_17_grp_a";
+			};
+
+			pins_led_18_a: led_18-a-pins {
+				function = "led_18";
+				groups = "led_18_grp_a";
+			};
+
+			pins_led_19_a: led_19-a-pins {
+				function = "led_19";
+				groups = "led_19_grp_a";
+			};
+
+			pins_led_20_a: led_20-a-pins {
+				function = "led_20";
+				groups = "led_20_grp_a";
+			};
+
+			pins_led_21_a: led_21-a-pins {
+				function = "led_21";
+				groups = "led_21_grp_a";
+			};
+
+			pins_led_22_a: led_22-a-pins {
+				function = "led_22";
+				groups = "led_22_grp_a";
+			};
+
+			pins_led_23_a: led_23-a-pins {
+				function = "led_23";
+				groups = "led_23_grp_a";
+			};
+
+			pins_led_24_a: led_24-a-pins {
+				function = "led_24";
+				groups = "led_24_grp_a";
+			};
+
+			pins_led_25_a: led_25-a-pins {
+				function = "led_25";
+				groups = "led_25_grp_a";
+			};
+
+			pins_led_26_a: led_26-a-pins {
+				function = "led_26";
+				groups = "led_26_grp_a";
+			};
+
+			pins_led_27_a: led_27-a-pins {
+				function = "led_27";
+				groups = "led_27_grp_a";
+			};
+
+			pins_led_28_a: led_28-a-pins {
+				function = "led_28";
+				groups = "led_28_grp_a";
+			};
+
+			pins_led_29_a: led_29-a-pins {
+				function = "led_29";
+				groups = "led_29_grp_a";
+			};
+
+			pins_led_30_a: led_30-a-pins {
+				function = "led_30";
+				groups = "led_30_grp_a";
+			};
+
+			pins_led_31_a: led_31-a-pins {
+				function = "led_31";
+				groups = "led_31_grp_a";
+			};
+
+			pins_hs_uart: hs_uart-pins {
+				function = "hs_uart";
+				groups = "hs_uart_grp";
+			};
+
+			pins_i2c_a: i2c-a-pins {
+				function = "i2c";
+				groups = "i2c_grp_a";
+			};
+
+			pins_i2c_b: i2c-b-pins {
+				function = "i2c";
+				groups = "i2c_grp_b";
+			};
+
+			pins_i2s: i2s-pins {
+				function = "i2s";
+				groups = "i2s_grp";
+			};
+
+			pins_nand_ctrl: nand_ctrl-pins {
+				function = "nand_ctrl";
+				groups = "nand_ctrl_grp";
+			};
+
+			pins_nand_data: nand_data-pins {
+				function = "nand_data";
+				groups = "nand_data_grp";
+			};
+
+			pins_emmc_ctrl: emmc_ctrl-pins {
+				function = "emmc_ctrl";
+				groups = "emmc_ctrl_grp";
+			};
+
+			pins_usb0_pwr: usb0_pwr-pins {
+				function = "usb0_pwr";
+				groups = "usb0_pwr_grp";
+			};
+
+			pins_usb1_pwr: usb1_pwr-pins {
+				function = "usb1_pwr";
+				groups = "usb1_pwr_grp";
+			};
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "okay";
+		};
+
+		leds: leds@800 {
+			compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand_ctlrdy";
+			status = "okay";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		i2c@2100 {
+			compatible = "brcm,brcmper-i2c";
+			reg = <0x2100 0x58>;
+			clock-frequency = <97500>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_i2c_a>;
+			status = "disabled";
+		};
+
+		misc@2600 {
+			compatible = "brcm,misc", "simple-mfd";
+			reg = <0x2600 0xe4>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00 0x2600 0xe4>;
+
+			reset-controller@2644 {
+				compatible = "brcm,bcm4908-misc-pcie-reset";
+				reg = <0x44 0x04>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&twd>;
+		offset = <0x34>;
+		mask = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
new file mode 100644
index 0000000000..ed554666e9
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+	compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca";
+	model = "Asus GT-AX6000";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
new file mode 100644
index 0000000000..d658c81f72
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm4912", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
new file mode 100644
index 0000000000..4f474d4702
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm63146", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
new file mode 100644
index 0000000000..909f254dc4
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm63158", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
new file mode 100644
index 0000000000..685ae32951
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6813", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
new file mode 100644
index 0000000000..820553ce54
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6856", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>;
+	};
+
+	clocks: clocks {
+		periph_clk:periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, /* GICD */
+				<0x2000 0x2000>, /* GICC */
+				<0x4000 0x2000>, /* GICH */
+				<0x6000 0x2000>; /* GICV */
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
new file mode 100644
index 0000000000..0eb93c2982
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6858", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk:periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, /* GICD */
+				<0x2000 0x2000>, /* GICC */
+				<0x4000 0x2000>, /* GICH */
+				<0x6000 0x2000>; /* GICV */
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x62000>;
+
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
+			ranges = <0x0 0x400 0x4c>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
+			watchdog@28 {
+				compatible = "brcm,bcm6345-wdt";
+				reg = <0x28 0x8>;
+			};
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
new file mode 100644
index 0000000000..c4e6e71f63
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4908.dtsi"
+
+/ {
+	model = "Broadcom BCM94908 Reference Board";
+	compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
new file mode 100644
index 0000000000..e69cd68321
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+	model = "Broadcom BCM94912 Reference Board";
+	compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
new file mode 100644
index 0000000000..db2c82d6df
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63146.dtsi"
+
+/ {
+	model = "Broadcom BCM963146 Reference Board";
+	compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
new file mode 100644
index 0000000000..25c12bc635
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63158.dtsi"
+
+/ {
+	model = "Broadcom BCM963158 Reference Board";
+	compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
new file mode 100644
index 0000000000..faba21f031
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6813.dtsi"
+
+/ {
+	model = "Broadcom BCM96813 Reference Board";
+	compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
new file mode 100644
index 0000000000..9808331eed
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6856.dtsi"
+
+/ {
+	model = "Broadcom BCM96856 Reference Board";
+	compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
new file mode 100644
index 0000000000..1f561c8e13
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6858.dtsi"
+
+/ {
+	model = "Broadcom BCM96858 Reference Board";
+	compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/Makefile b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
new file mode 100644
index 0000000000..601e1e6312
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-xmc.dtb
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
new file mode 100644
index 0000000000..99009fdf10
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
@@ -0,0 +1,105 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-ns2.h>
+
+	osc: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	lcpll_ddr: lcpll_ddr@6501d058 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ddr";
+		reg = <0x6501d058 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d04c 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+				     "ddr", "ddr_ch2_unused",
+				     "ddr_ch3_unused", "ddr_ch4_unused",
+				     "ddr_ch5_unused";
+	};
+
+	lcpll_ports: lcpll_ports@6501d078 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ports";
+		reg = <0x6501d078 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d054 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ports", "wan", "rgmii",
+				     "ports_ch2_unused",
+				     "ports_ch3_unused",
+				     "ports_ch4_unused",
+				     "ports_ch5_unused";
+	};
+
+	genpll_scr: genpll_scr@6501d098 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-scr";
+		reg = <0x6501d098 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_scr", "scr", "fs",
+				     "audio_ref", "scr_ch3_unused",
+				     "scr_ch4_unused", "scr_ch5_unused";
+	};
+
+	iprocmed: iprocmed {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	iprocslow: iprocslow {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	genpll_sw: genpll_sw@6501d0c4 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-sw";
+		reg = <0x6501d0c4 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_sw", "rpe", "250", "nic",
+				     "chimp", "port", "sdio";
+	};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
new file mode 100644
index 0000000000..fbf0392b83
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -0,0 +1,236 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+	model = "Broadcom NS2 SVK";
+	compatible = "brcm,ns2-svk", "brcm,ns2";
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart0;
+		serial2 = &uart1;
+		serial3 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x66130000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+	};
+};
+
+&enet {
+	status = "okay";
+};
+
+&pci_phy0 {
+	status = "okay";
+};
+
+&pci_phy1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie4 {
+	status = "okay";
+};
+
+&pcie8 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ssp0 {
+	status = "okay";
+
+	slic@0 {
+		compatible = "silabs,si3226x";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
+&ssp1 {
+	status = "okay";
+
+	at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		at25,byte-len = <0x8000>;
+		at25,addr-mode = <2>;
+		at25,page-size = <64>;
+		spi-cpha;
+		spi-cpol;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sdio0 {
+	status = "okay";
+};
+
+&sdio1 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			enet-phy-lane-swap;
+			reg = <0x10>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
new file mode 100644
index 0000000000..1d314f17bb
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -0,0 +1,191 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+	model = "Broadcom NS2 XMC";
+	compatible = "brcm,ns2-xmc", "brcm,ns2";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x66130000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
+	};
+};
+
+&enet {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			reg = <0x10>;
+		};
+	};
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00280000>; /*  2.5MB */
+			read-only;
+		};
+
+		partition@280000 {
+			label = "nenv";
+			reg = <0x00280000 0x00040000>; /* 0.25MB */
+			read-only;
+		};
+
+		partition@2c0000 {
+			label = "ndtb";
+			reg = <0x002c0000 0x00040000>; /* 0.25MB */
+			read-only;
+		};
+
+		partition@300000 {
+			label = "nsystem";
+			reg = <0x00300000 0x03d00000>; /*   61MB */
+			read-only;
+		};
+
+		partition@4000000 {
+			label = "nrootfs";
+			reg = <0x04000000 0x06400000>; /*  100MB */
+		};
+
+		partition@a400000 {
+			label = "ncustfs";
+			reg = <0x0a400000 0x35c00000>; /*  860MB */
+		};
+	};
+};
+
+&pci_phy0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie8 {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&qspi {
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		spi-max-frequency = <62500000>;
+		m25p,default-addr-width = <3>;
+		reg = <0x0 0x0>;
+
+		partition@0 {
+			label = "bl0";
+			reg = <0x00000000 0x00080000>; /*  512KB */
+		};
+
+		partition@80000 {
+			label = "fip";
+			reg = <0x00080000 0x00150000>; /* 1344KB */
+		};
+
+		partition@1e0000 {
+			label = "env";
+			reg = <0x001e0000 0x00010000>;/*    64KB */
+		};
+
+		partition@1f0000 {
+			label = "dtb";
+			reg = <0x001f0000 0x00010000>; /*   64KB */
+		};
+
+		partition@200000 {
+			label = "kernel";
+			reg = <0x00200000 0x00e00000>; /*   14MB */
+		};
+
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x01000000>; /*   16MB */
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
new file mode 100644
index 0000000000..9dcd25ec2c
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -0,0 +1,765 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2015 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/memreserve/ 0x81000000 0x00200000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/bcm-ns2.h>
+
+/ {
+	compatible = "brcm,ns2";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		A57_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0 0>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		A57_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0 1>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		A57_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0 2>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		A57_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0 3>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		CLUSTER0_L2: l2-cache@0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>,
+				     <&A57_2>,
+				     <&A57_3>;
+	};
+
+	pcie0: pcie@20020000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0 0x20020000 0 0x1000>;
+		dma-coherent;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
+
+		brcm,pcie-ob;
+		brcm,pcie-ob-oarr-size;
+		brcm,pcie-ob-axi-offset = <0x00000000>;
+		brcm,pcie-ob-window-size = <256>;
+
+		status = "disabled";
+
+		phys = <&pci_phy0>;
+		phy-names = "pcie-phy";
+
+		msi-parent = <&v2m0>;
+	};
+
+	pcie4: pcie@50020000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0 0x50020000 0 0x1000>;
+		dma-coherent;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <4>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
+
+		brcm,pcie-ob;
+		brcm,pcie-ob-oarr-size;
+		brcm,pcie-ob-axi-offset = <0x30000000>;
+		brcm,pcie-ob-window-size = <256>;
+
+		status = "disabled";
+
+		phys = <&pci_phy1>;
+		phy-names = "pcie-phy";
+
+		msi-parent = <&v2m0>;
+	};
+
+	pcie8: pcie@60c00000 {
+		compatible = "brcm,iproc-pcie-paxc";
+		reg = <0 0x60c00000 0 0x1000>;
+		dma-coherent;
+		linux,pci-domain = <8>;
+
+		bus-range = <0x0 0x1>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>;
+
+		status = "disabled";
+
+		msi-parent = <&v2m0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		#include "ns2-clock.dtsi"
+
+		enet: ethernet@61000000 {
+			compatible = "brcm,ns2-amac";
+			reg = <0x61000000 0x1000>,
+			      <0x61090000 0x1000>,
+			      <0x61030000 0x100>;
+			reg-names = "amac_base", "idm_base", "nicpm_base";
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			phy-handle = <&gphy0>;
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
+		pdc0: iproc-pdc0@612c0000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x612c0000 0x445>;  /* PDC FS0 regs */
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			dma-coherent;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		crypto0: crypto@612d0000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x612d0000 0x900>;
+			mboxes = <&pdc0 0>;
+		};
+
+		pdc1: iproc-pdc1@612e0000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x612e0000 0x445>;  /* PDC FS1 regs */
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			dma-coherent;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		crypto1: crypto@612f0000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x612f0000 0x900>;
+			mboxes = <&pdc1 0>;
+		};
+
+		pdc2: iproc-pdc2@61300000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x61300000 0x445>;  /* PDC FS2 regs */
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			dma-coherent;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		crypto2: crypto@61310000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x61310000 0x900>;
+			mboxes = <&pdc2 0>;
+		};
+
+		pdc3: iproc-pdc3@61320000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x61320000 0x445>;  /* PDC FS3 regs */
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			dma-coherent;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		crypto3: crypto@61330000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x61330000 0x900>;
+			mboxes = <&pdc3 0>;
+		};
+
+		dma0: dma-controller@61360000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x61360000 0x1000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		smmu: iommu@64000000 {
+			compatible = "arm,mmu-500";
+			reg = <0x64000000 0x40000>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+		};
+
+		pinctrl: pinctrl@6501d130 {
+			compatible = "brcm,ns2-pinmux";
+			reg = <0x6501d130 0x08>,
+			      <0x660a0028 0x04>,
+			      <0x660009b0 0x40>;
+		};
+
+		gpio_aon: gpio@65024800 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x65024800 0x50>,
+			      <0x65024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gic: interrupt-controller@65210000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x65210000 0x1000>,
+			      <0x65220000 0x1000>,
+			      <0x65240000 0x2000>,
+			      <0x65260000 0x1000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x652e0000 0x80000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x00000 0x1000>;
+				arm,msi-base-spi = <72>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m1: v2m@10000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x10000 0x1000>;
+				arm,msi-base-spi = <88>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m2: v2m@20000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x20000 0x1000>;
+				arm,msi-base-spi = <104>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m3: v2m@30000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x30000 0x1000>;
+				arm,msi-base-spi = <120>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m4: v2m@40000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x40000 0x1000>;
+				arm,msi-base-spi = <136>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m5: v2m@50000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x50000 0x1000>;
+				arm,msi-base-spi = <152>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m6: v2m@60000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x60000 0x1000>;
+				arm,msi-base-spi = <168>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m7: v2m@70000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x70000 0x1000>;
+				arm,msi-base-spi = <184>;
+				arm,msi-num-spis = <16>;
+			};
+		};
+
+		cci@65590000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x65590000 0x1000>;
+			ranges = <0 0x65590000 0x10000>;
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1",
+					     "arm,cci-400-pmu";
+				reg = <0x9000 0x4000>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		usbdrd_phy: phy@66000960 {
+			#phy-cells = <0>;
+			compatible = "brcm,ns2-drd-phy";
+			reg = <0x66000960 0x24>,
+			      <0x67012800 0x4>,
+			      <0x6501d148 0x4>,
+			      <0x664d0700 0x4>;
+			reg-names = "icfg", "rst-ctrl",
+				    "crmu-ctrl", "usb2-strap";
+			id-gpios = <&gpio_g 30 0>;
+			vbus-gpios = <&gpio_g 31 0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@66010000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x66010000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		mdio_mux_iproc: mdio-mux@66020000 {
+			compatible = "brcm,mdio-mux-iproc";
+			reg = <0x66020000 0x250>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pci_phy0: pci-phy@0 {
+					compatible = "brcm,ns2-pcie-phy";
+					reg = <0x0>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio@7 {
+				reg = <0x7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pci_phy1: pci-phy@0 {
+					compatible = "brcm,ns2-pcie-phy";
+					reg = <0x0>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio@10 {
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		timer0: timer@66030000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66030000 0x1000>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer1: timer@66040000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66040000 0x1000>;
+			interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer2: timer@66050000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66050000 0x1000>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer3: timer@66060000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66060000 0x1000>;
+			interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		i2c0: i2c@66080000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x66080000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@66090000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x66090000 0x1000>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		gpio_g: gpio@660a0000 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x660a0000 0x50>;
+			ngpios = <32>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c1: i2c@660b0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x660b0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		uart0: serial@66100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66100000 0x100>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@66110000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66110000 0x100>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@66120000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66120000 0x100>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@66130000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66130000 0x100>;
+			interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		ssp0: spi@66180000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66180000 0x1000>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "sspclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssp1: spi@66190000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66190000 0x1000>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "sspclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hwrng: hwrng@66220000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x66220000 0x28>;
+		};
+
+		sata_phy: sata_phy@663f0100 {
+			compatible = "brcm,iproc-ns2-sata-phy";
+			reg = <0x663f0100 0x1f00>,
+			      <0x663f004c 0x10>;
+			reg-names = "phy", "phy-ctrl";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: sata@663f2000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x663f2000 0x1000>;
+			dma-coherent;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+				phy-names = "sata-phy";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sdio0: sdhci@66420000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x66420000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			bus-width = <8>;
+			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+			status = "disabled";
+		};
+
+		sdio1: sdhci@66430000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x66430000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			bus-width = <8>;
+			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+			status = "disabled";
+		};
+
+		nand: nand@66460000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x66460000 0x600>,
+			      <0x67015408 0x600>,
+			      <0x66460f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		qspi: spi@66470200 {
+			compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
+			reg = <0x66470200 0x184>,
+				<0x66470000 0x124>,
+				<0x67017408 0x004>,
+				<0x664703a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				"intr_status_reg";
+			interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_l1_intr";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile
new file mode 100644
index 0000000000..20c7d0aa6c
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb
+
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958802a802x.dtb
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
new file mode 100644
index 0000000000..8fe7325cfb
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -0,0 +1,112 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "stingray-board-base.dtsi"
+
+/ {
+	sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
+		compatible = "regulator-gpio";
+		regulator-name = "sdio0_vddo_ctrl_reg";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pca9505 18 0>;
+		states = <3300000 0x0
+			  1800000 0x1>;
+	};
+
+	sdio1_vddo_ctrl_reg: sdio1_vddo_ctrl {
+		compatible = "regulator-gpio";
+		regulator-name = "sdio1_vddo_ctrl_reg";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pca9505 19 0>;
+		states = <3300000 0x0
+			  1800000 0x1>;
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9505: pca9505@20 {
+		compatible = "nxp,pca9505";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pcf8574: pcf8574@27 {
+		compatible = "nxp,pcf8574a";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x27>;
+	};
+};
+
+&enet {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&sdio0 {
+	vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
+	status = "okay";
+};
+
+&sdio1 {
+	vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
new file mode 100644
index 0000000000..dfac910a45
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
@@ -0,0 +1,86 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958742k", "brcm,stingray";
+	model = "Stingray Combo SVK (BCM958742K)";
+};
+
+&gphy0 {
+	enet-phy-lane-swap;
+};
+
+&sdio0 {
+	mmc-ddr-1_8v;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ssp0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio_hsls 34 0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ssp1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio_hsls 96 0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
new file mode 100644
index 0000000000..55ba495ef5
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
@@ -0,0 +1,48 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958742t", "brcm,stingray";
+	model = "Stingray SST100 (BCM958742T)";
+};
+
+&gphy0 {
+	enet-phy-lane-swap;
+};
+
+&sdio0 {
+	mmc-ddr-1_8v;
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
new file mode 100644
index 0000000000..66471a25e4
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+
+/dts-v1/;
+
+#include "stingray-board-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958802a802x", "brcm,stingray";
+	model = "Stingray PS225xx (BCM958802A802x)";
+};
+
+&enet {
+	status = "disabled";
+};
+
+&sdio0 {
+	no-1-8-v;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
new file mode 100644
index 0000000000..cdd709491f
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ *  Copyright(c) 2016-2018 Broadcom
+ */
+
+#include "stingray.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&memory { /* Default DRAM banks */
+	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
+	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
+};
+
+&enet {
+	phy-mode = "rgmii-id";
+	phy-handle = <&gphy0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&sdio0 {
+	non-removable;
+	full-pwr-cycle;
+};
+
+&sdio1 {
+	full-pwr-cycle;
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			reg = <0x10>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
new file mode 100644
index 0000000000..10a106aca2
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -0,0 +1,182 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-sr.h>
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		crmu_ref25m: crmu_ref25m {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&osc>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		genpll0: genpll0@1d104 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll0";
+			reg = <0x0001d104 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll0", "clk_125m", "clk_scr",
+					     "clk_250", "clk_pcie_axi",
+					     "clk_paxc_axi_x2",
+					     "clk_paxc_axi";
+		};
+
+		genpll2: genpll2@1d1ac {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll2";
+			reg = <0x0001d1ac 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll2", "clk_nic",
+					     "clk_ts_500_ref", "clk_125_nitro",
+					     "clk_chimp", "clk_nic_flash",
+					     "clk_fs";
+		};
+
+		genpll3: genpll3@1d1e0 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll3";
+			reg = <0x0001d1e0 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll3", "clk_hsls",
+					     "clk_sdio";
+		};
+
+		genpll4: genpll4@1d214 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll4";
+			reg = <0x0001d214 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll4", "clk_ccn",
+					     "clk_tpiu_pll", "clk_noc",
+					     "clk_chclk_fs4",
+					     "clk_bridge_fscpu";
+		};
+
+		genpll5: genpll5@1d248 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll5";
+			reg = <0x0001d248 0x32>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll5", "clk_fs4_hf",
+					     "clk_crypto_ae", "clk_raid_ae";
+		};
+
+		lcpll0: lcpll0@1d0c4 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll0";
+			reg = <0x0001d0c4 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "clk_sata_refp",
+					     "clk_sata_refn", "clk_sata_350",
+					     "clk_sata_500";
+		};
+
+		lcpll1: lcpll1@1d138 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll1";
+			reg = <0x0001d138 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll1", "clk_wan",
+					     "clk_usb_ref",
+					     "clk_crmu_ts";
+		};
+
+		hsls_clk: hsls_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 1>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_div2_clk: hsls_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+
+		};
+
+		hsls_div4_clk: hsls_div4_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_clk: hsls_25m_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&crmu_ref25m>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_div2_clk: hsls_25m_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&hsls_25m_clk>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		sdio0_clk: sdio0_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		sdio1_clk: sdio1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
new file mode 100644
index 0000000000..9666969c8c
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
@@ -0,0 +1,118 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+	fs4: fs4 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x67000000 0x00800000>;
+
+		crypto_mbox: crypto_mbox@0 {
+			compatible = "brcm,iproc-flexrm-mbox";
+			reg = <0x00000000 0x200000>;
+			msi-parent = <&gic_its 0x4100>;
+			#mbox-cells = <3>;
+			dma-coherent;
+		};
+
+		raid_mbox: raid_mbox@400000 {
+			compatible = "brcm,iproc-flexrm-mbox";
+			reg = <0x00400000 0x200000>;
+			dma-coherent;
+			msi-parent = <&gic_its 0x4300>;
+			#mbox-cells = <3>;
+		};
+
+		raid0: raid@0 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 0 0x1 0xff00>,
+				 <&raid_mbox 1 0x1 0xff00>,
+				 <&raid_mbox 2 0x1 0xff00>,
+				 <&raid_mbox 3 0x1 0xff00>;
+		};
+
+		raid1: raid@1 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 4 0x1 0xff00>,
+				 <&raid_mbox 5 0x1 0xff00>,
+				 <&raid_mbox 6 0x1 0xff00>,
+				 <&raid_mbox 7 0x1 0xff00>;
+		};
+
+		raid2: raid@2 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 8 0x1 0xff00>,
+				 <&raid_mbox 9 0x1 0xff00>,
+				 <&raid_mbox 10 0x1 0xff00>,
+				 <&raid_mbox 11 0x1 0xff00>;
+		};
+
+		raid3: raid@3 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 12 0x1 0xff00>,
+				 <&raid_mbox 13 0x1 0xff00>,
+				 <&raid_mbox 14 0x1 0xff00>,
+				 <&raid_mbox 15 0x1 0xff00>;
+		};
+
+		raid4: raid@4 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 16 0x1 0xff00>,
+				 <&raid_mbox 17 0x1 0xff00>,
+				 <&raid_mbox 18 0x1 0xff00>,
+				 <&raid_mbox 19 0x1 0xff00>;
+		};
+
+		raid5: raid@5 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 20 0x1 0xff00>,
+				 <&raid_mbox 21 0x1 0xff00>,
+				 <&raid_mbox 22 0x1 0xff00>,
+				 <&raid_mbox 23 0x1 0xff00>;
+		};
+
+		raid6: raid@6 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 24 0x1 0xff00>,
+				 <&raid_mbox 25 0x1 0xff00>,
+				 <&raid_mbox 26 0x1 0xff00>,
+				 <&raid_mbox 27 0x1 0xff00>;
+		};
+
+		raid7: raid@7 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 28 0x1 0xff00>,
+				 <&raid_mbox 29 0x1 0xff00>,
+				 <&raid_mbox 30 0x1 0xff00>,
+				 <&raid_mbox 31 0x1 0xff00>;
+		};
+	};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
new file mode 100644
index 0000000000..663e517567
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+
+pcie8: pcie@60400000 {
+	compatible = "brcm,iproc-pcie-paxc-v2";
+	reg = <0 0x60400000 0 0x1000>;
+	linux,pci-domain = <8>;
+
+	bus-range = <0x0 0x1>;
+
+	#address-cells = <3>;
+	#size-cells = <2>;
+	device_type = "pci";
+	ranges = <0x83000000 0 0x10000000 0 0x10000000 0 0x20000000>;
+
+	dma-coherent;
+
+	msi-map = <0x100 &gic_its 0x2000 0x1>, /* PF0 */
+		  <0x108 &gic_its 0x2040 0x8>, /* PF0-VF0-7 */
+		  <0x101 &gic_its 0x2080 0x1>, /* PF1 */
+		  <0x110 &gic_its 0x20c8 0x8>, /* PF1-VF8-15 */
+		  <0x102 &gic_its 0x2100 0x1>, /* PF2 */
+		  <0x118 &gic_its 0x2150 0x8>, /* PF2-VF16-23 */
+		  <0x103 &gic_its 0x2180 0x1>, /* PF3 */
+		  <0x120 &gic_its 0x21d8 0x8>, /* PF3-VF24-31 */
+		  <0x104 &gic_its 0x2200 0x1>, /* PF4 */
+		  <0x128 &gic_its 0x2260 0x8>, /* PF4-VF32-39 */
+		  <0x105 &gic_its 0x2280 0x1>, /* PF5 */
+		  <0x130 &gic_its 0x22e8 0x8>, /* PF5-VF40-47 */
+		  <0x106 &gic_its 0x2300 0x1>, /* PF6 */
+		  <0x138 &gic_its 0x2370 0x8>, /* PF6-VF48-55 */
+		  <0x107 &gic_its 0x2380 0x1>, /* PF7 */
+		  <0x140 &gic_its 0x23f8 0x8>; /* PF7-VF56-63 */
+
+	phys = <&pcie_phy 8>;
+	phy-names = "pcie-phy";
+};
+
+pcie-ss {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x40000000 0x800>;
+
+	pcie_phy: phy@0 {
+		compatible = "brcm,sr-pcie-phy";
+		reg = <0x0 0x200>;
+		brcm,sr-cdru = <&cdru>;
+		brcm,sr-mhb = <&mhb>;
+		#phy-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
new file mode 100644
index 0000000000..46a8275219
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -0,0 +1,346 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
+
+		pinconf: pinconf@140000 {
+			compatible = "pinconf-single";
+			reg = <0x00140000 0x250>;
+			pinctrl-single,register-width = <32>;
+
+			/* pinconf functions */
+		};
+
+		pinmux: pinmux@14029c {
+			compatible = "pinctrl-single";
+			reg = <0x0014029c 0x26c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xf>;
+			pinctrl-single,gpio-range = <
+				&range 0  91 MODE_GPIO
+				&range 95 60 MODE_GPIO
+				>;
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+
+			/* pinctrl functions */
+			tsio_pins: gpio-14-pins {
+				pinctrl-single,pins = <
+					0x038 MODE_NITRO /* tsio_0 */
+					0x03c MODE_NITRO /* tsio_1 */
+				>;
+			};
+
+			nor_pins: pnor-adv-n-pins {
+				pinctrl-single,pins = <
+					0x0ac MODE_PNOR /* nand_ce1_n */
+					0x0b0 MODE_PNOR /* nand_ce0_n */
+					0x0b4 MODE_PNOR /* nand_we_n */
+					0x0b8 MODE_PNOR /* nand_wp_n */
+					0x0bc MODE_PNOR /* nand_re_n */
+					0x0c0 MODE_PNOR /* nand_rdy_bsy_n */
+					0x0c4 MODE_PNOR /* nand_io0_0 */
+					0x0c8 MODE_PNOR /* nand_io1_0 */
+					0x0cc MODE_PNOR /* nand_io2_0 */
+					0x0d0 MODE_PNOR /* nand_io3_0 */
+					0x0d4 MODE_PNOR /* nand_io4_0 */
+					0x0d8 MODE_PNOR /* nand_io5_0 */
+					0x0dc MODE_PNOR /* nand_io6_0 */
+					0x0e0 MODE_PNOR /* nand_io7_0 */
+					0x0e4 MODE_PNOR /* nand_io8_0 */
+					0x0e8 MODE_PNOR /* nand_io9_0 */
+					0x0ec MODE_PNOR /* nand_io10_0 */
+					0x0f0 MODE_PNOR /* nand_io11_0 */
+					0x0f4 MODE_PNOR /* nand_io12_0 */
+					0x0f8 MODE_PNOR /* nand_io13_0 */
+					0x0fc MODE_PNOR /* nand_io14_0 */
+					0x100 MODE_PNOR /* nand_io15_0 */
+					0x104 MODE_PNOR /* nand_ale_0 */
+					0x108 MODE_PNOR /* nand_cle_0 */
+					0x040 MODE_PNOR /* pnor_adv_n */
+					0x044 MODE_PNOR /* pnor_baa_n */
+					0x048 MODE_PNOR /* pnor_bls_0_n */
+					0x04c MODE_PNOR /* pnor_bls_1_n */
+					0x050 MODE_PNOR /* pnor_cre */
+					0x054 MODE_PNOR /* pnor_cs_2_n */
+					0x058 MODE_PNOR /* pnor_cs_1_n */
+					0x05c MODE_PNOR /* pnor_cs_0_n */
+					0x060 MODE_PNOR /* pnor_we_n */
+					0x064 MODE_PNOR /* pnor_oe_n */
+					0x068 MODE_PNOR /* pnor_intr */
+					0x06c MODE_PNOR /* pnor_dat_0 */
+					0x070 MODE_PNOR /* pnor_dat_1 */
+					0x074 MODE_PNOR /* pnor_dat_2 */
+					0x078 MODE_PNOR /* pnor_dat_3 */
+					0x07c MODE_PNOR /* pnor_dat_4 */
+					0x080 MODE_PNOR /* pnor_dat_5 */
+					0x084 MODE_PNOR /* pnor_dat_6 */
+					0x088 MODE_PNOR /* pnor_dat_7 */
+					0x08c MODE_PNOR /* pnor_dat_8 */
+					0x090 MODE_PNOR /* pnor_dat_9 */
+					0x094 MODE_PNOR /* pnor_dat_10 */
+					0x098 MODE_PNOR /* pnor_dat_11 */
+					0x09c MODE_PNOR /* pnor_dat_12 */
+					0x0a0 MODE_PNOR /* pnor_dat_13 */
+					0x0a4 MODE_PNOR /* pnor_dat_14 */
+					0x0a8 MODE_PNOR /* pnor_dat_15 */
+				>;
+			};
+
+			nand_pins: nand-ce1-n-pins {
+				pinctrl-single,pins = <
+					0x0ac MODE_NAND /* nand_ce1_n */
+					0x0b0 MODE_NAND /* nand_ce0_n */
+					0x0b4 MODE_NAND /* nand_we_n */
+					0x0b8 MODE_NAND /* nand_wp_n */
+					0x0bc MODE_NAND /* nand_re_n */
+					0x0c0 MODE_NAND /* nand_rdy_bsy_n */
+					0x0c4 MODE_NAND /* nand_io0_0 */
+					0x0c8 MODE_NAND /* nand_io1_0 */
+					0x0cc MODE_NAND /* nand_io2_0 */
+					0x0d0 MODE_NAND /* nand_io3_0 */
+					0x0d4 MODE_NAND /* nand_io4_0 */
+					0x0d8 MODE_NAND /* nand_io5_0 */
+					0x0dc MODE_NAND /* nand_io6_0 */
+					0x0e0 MODE_NAND /* nand_io7_0 */
+					0x0e4 MODE_NAND /* nand_io8_0 */
+					0x0e8 MODE_NAND /* nand_io9_0 */
+					0x0ec MODE_NAND /* nand_io10_0 */
+					0x0f0 MODE_NAND /* nand_io11_0 */
+					0x0f4 MODE_NAND /* nand_io12_0 */
+					0x0f8 MODE_NAND /* nand_io13_0 */
+					0x0fc MODE_NAND /* nand_io14_0 */
+					0x100 MODE_NAND /* nand_io15_0 */
+					0x104 MODE_NAND /* nand_ale_0 */
+					0x108 MODE_NAND /* nand_cle_0 */
+				>;
+			};
+
+			pwm0_pins: pwm-0-pins {
+				pinctrl-single,pins = <
+					0x10c MODE_NITRO
+				>;
+			};
+
+			pwm1_pins: pwm-1-pins {
+				pinctrl-single,pins = <
+					0x110 MODE_NITRO
+				>;
+			};
+
+			pwm2_pins: pwm-2-pins {
+				pinctrl-single,pins = <
+					0x114 MODE_NITRO
+				>;
+			};
+
+			pwm3_pins: pwm-3-pins {
+				pinctrl-single,pins = <
+					0x118 MODE_NITRO
+				>;
+			};
+
+			dbu_rxd_pins: uart1-sin-nitro-pins {
+				pinctrl-single,pins = <
+					0x11c MODE_NITRO /* dbu_rxd */
+					0x120 MODE_NITRO /* dbu_txd */
+				>;
+			};
+
+			uart1_pins: uart1-sin-nand-pins {
+				pinctrl-single,pins = <
+					0x11c MODE_NAND /* uart1_sin */
+					0x120 MODE_NAND /* uart1_out */
+				>;
+			};
+
+			uart2_pins: uart2-sin-pins {
+				pinctrl-single,pins = <
+					0x124 MODE_NITRO /* uart2_sin */
+					0x128 MODE_NITRO /* uart2_out */
+				>;
+			};
+
+			uart3_pins: uart3-sin-pins {
+				pinctrl-single,pins = <
+					0x12c MODE_NITRO /* uart3_sin */
+					0x130 MODE_NITRO /* uart3_out */
+				>;
+			};
+
+			i2s_pins: i2s-bitclk-pins {
+				pinctrl-single,pins = <
+					0x134 MODE_NITRO /* i2s_bitclk */
+					0x138 MODE_NITRO /* i2s_sdout */
+					0x13c MODE_NITRO /* i2s_sdin */
+					0x140 MODE_NITRO /* i2s_ws */
+					0x144 MODE_NITRO /* i2s_mclk */
+					0x148 MODE_NITRO /* i2s_spdif_out */
+				>;
+			};
+
+			qspi_pins: qspi-hold-n-pins {
+				pinctrl-single,pins = <
+					0x14c MODE_NAND /* qspi_hold_n */
+					0x150 MODE_NAND /* qspi_wp_n */
+					0x154 MODE_NAND /* qspi_sck */
+					0x158 MODE_NAND /* qspi_cs_n */
+					0x15c MODE_NAND /* qspi_mosi */
+					0x160 MODE_NAND /* qspi_miso */
+				>;
+			};
+
+			mdio_pins: ext-mdio-pins {
+				pinctrl-single,pins = <
+					0x164 MODE_NITRO /* ext_mdio */
+					0x168 MODE_NITRO /* ext_mdc */
+				>;
+			};
+
+			i2c0_pins: i2c0-sda-pins {
+				pinctrl-single,pins = <
+					0x16c MODE_NITRO /* i2c0_sda */
+					0x170 MODE_NITRO /* i2c0_scl */
+				>;
+			};
+
+			i2c1_pins: i2c1-sda-pins {
+				pinctrl-single,pins = <
+					0x174 MODE_NITRO /* i2c1_sda */
+					0x178 MODE_NITRO /* i2c1_scl */
+				>;
+			};
+
+			sdio0_pins: sdio0-cd-l-pins {
+				pinctrl-single,pins = <
+					0x17c MODE_NITRO /* sdio0_cd_l */
+					0x180 MODE_NITRO /* sdio0_clk_sdcard */
+					0x184 MODE_NITRO /* sdio0_data0 */
+					0x188 MODE_NITRO /* sdio0_data1 */
+					0x18c MODE_NITRO /* sdio0_data2 */
+					0x190 MODE_NITRO /* sdio0_data3 */
+					0x194 MODE_NITRO /* sdio0_data4 */
+					0x198 MODE_NITRO /* sdio0_data5 */
+					0x19c MODE_NITRO /* sdio0_data6 */
+					0x1a0 MODE_NITRO /* sdio0_data7 */
+					0x1a4 MODE_NITRO /* sdio0_cmd */
+					0x1a8 MODE_NITRO /* sdio0_emmc_rst_n */
+					0x1ac MODE_NITRO /* sdio0_led_on */
+					0x1b0 MODE_NITRO /* sdio0_wp */
+				>;
+			};
+
+			sdio1_pins: sdio1-cd-l-pins {
+				pinctrl-single,pins = <
+					0x1b4 MODE_NITRO /* sdio1_cd_l */
+					0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
+					0x1bc MODE_NITRO /* sdio1_data0 */
+					0x1c0 MODE_NITRO /* sdio1_data1 */
+					0x1c4 MODE_NITRO /* sdio1_data2 */
+					0x1c8 MODE_NITRO /* sdio1_data3 */
+					0x1cc MODE_NITRO /* sdio1_data4 */
+					0x1d0 MODE_NITRO /* sdio1_data5 */
+					0x1d4 MODE_NITRO /* sdio1_data6 */
+					0x1d8 MODE_NITRO /* sdio1_data7 */
+					0x1dc MODE_NITRO /* sdio1_cmd */
+					0x1e0 MODE_NITRO /* sdio1_emmc_rst_n */
+					0x1e4 MODE_NITRO /* sdio1_led_on */
+					0x1e8 MODE_NITRO /* sdio1_wp */
+				>;
+			};
+
+			spi0_pins: spi0-sck-nand-pins {
+				pinctrl-single,pins = <
+					0x1ec MODE_NITRO /* spi0_sck */
+					0x1f0 MODE_NITRO /* spi0_rxd */
+					0x1f4 MODE_NITRO /* spi0_fss */
+					0x1f8 MODE_NITRO /* spi0_txd */
+				>;
+			};
+
+			spi1_pins: spi1-sck-nand-pins {
+				pinctrl-single,pins = <
+					0x1fc MODE_NITRO /* spi1_sck */
+					0x200 MODE_NITRO /* spi1_rxd */
+					0x204 MODE_NITRO /* spi1_fss */
+					0x208 MODE_NITRO /* spi1_txd */
+				>;
+			};
+
+			nuart_pins: uart0-sin-nitro-pins {
+				pinctrl-single,pins = <
+					0x20c MODE_NITRO /* nuart_rxd */
+					0x210 MODE_NITRO /* nuart_txd */
+				>;
+			};
+
+			uart0_pins: uart0-sin-nand-pins {
+				pinctrl-single,pins = <
+					0x20c MODE_NAND /* uart0_sin */
+					0x210 MODE_NAND /* uart0_out */
+					0x214 MODE_NAND /* uart0_rts */
+					0x218 MODE_NAND /* uart0_cts */
+					0x21c MODE_NAND /* uart0_dtr */
+					0x220 MODE_NAND /* uart0_dcd */
+					0x224 MODE_NAND /* uart0_dsr */
+					0x228 MODE_NAND /* uart0_ri */
+				>;
+			};
+
+			drdu2_pins: drdu2-overcurrent-pins {
+				pinctrl-single,pins = <
+					0x22c MODE_NITRO /* drdu2_overcurrent */
+					0x230 MODE_NITRO /* drdu2_vbus_ppc */
+					0x234 MODE_NITRO /* drdu2_vbus_present */
+					0x238 MODE_NITRO /* drdu2_id */
+				>;
+			};
+
+			drdu3_pins: drdu3-overcurrent-pins {
+				pinctrl-single,pins = <
+					0x23c MODE_NITRO /* drdu3_overcurrent */
+					0x240 MODE_NITRO /* drdu3_vbus_ppc */
+					0x244 MODE_NITRO /* drdu3_vbus_present */
+					0x248 MODE_NITRO /* drdu3_id */
+				>;
+			};
+
+			usb3h_pins: usb3h-overcurrent-pins {
+				pinctrl-single,pins = <
+					0x24c MODE_NITRO /* usb3h_overcurrent */
+					0x250 MODE_NITRO /* usb3h_vbus_ppc */
+				>;
+			};
+		};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
new file mode 100644
index 0000000000..ac4f7b8f92
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+	usb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
+
+		/*
+		 * Internally, USB bus to the interconnect can only address up
+		 * to 40-bit
+		 */
+		dma-ranges = <0 0 0 0 0x100 0x0>;
+
+		usbphy0: usb-phy@0 {
+			compatible = "brcm,sr-usb-combo-phy";
+			reg = <0x0 0x00000000 0x0 0x100>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		xhci0: usb@1000 {
+			compatible = "generic-xhci";
+			reg = <0x0 0x00001000 0x0 0x1000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0 1>, <&usbphy0 0>;
+			phy-names = "phy0", "phy1";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		bdc0: usb@2000 {
+			compatible = "brcm,bdc-v0.16";
+			reg = <0x0 0x00002000 0x0 0x1000>;
+			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0 0>, <&usbphy0 1>;
+			phy-names = "phy0", "phy1";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usbphy1: usb-phy@10000 {
+			compatible = "brcm,sr-usb-combo-phy";
+			reg = <0x0 0x00010000 0x0 0x100>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usbphy2: usb-phy@20000 {
+			compatible = "brcm,sr-usb-hs-phy";
+			reg = <0x0 0x00020000 0x0 0x100>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		xhci1: usb@11000 {
+			compatible = "generic-xhci";
+			reg = <0x0 0x00011000 0x0 0x1000>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
+			phy-names = "phy0", "phy1", "phy2";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		bdc1: usb@21000 {
+			compatible = "brcm,bdc-v0.16";
+			reg = <0x0 0x00021000 0x0 0x1000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy2>;
+			phy-names = "phy0";
+			dma-coherent;
+			status = "disabled";
+		};
+	};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
new file mode 100644
index 0000000000..f049687d6b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -0,0 +1,717 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,stingray";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER2_L2>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x201>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER2_L2>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER3_L2>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x301>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER3_L2>;
+		};
+
+		CLUSTER0_L2: l2-cache@0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		CLUSTER1_L2: l2-cache@100 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		CLUSTER2_L2: l2-cache@200 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		CLUSTER3_L2: l2-cache@300 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	mhb: syscon@60401000 {
+		compatible = "brcm,sr-mhb", "syscon";
+		reg = <0 0x60401000 0 0x38c>;
+	};
+
+	scr {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x61000000 0x05000000>;
+
+		ccn: ccn@0 {
+			compatible = "arm,ccn-502";
+			reg = <0x00000000 0x900000>;
+			interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@2c00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			reg = <0x02c00000 0x010000>, /* GICD */
+			      <0x02e00000 0x600000>; /* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			gic_its: msi-controller@63c20000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0x02c20000 0x10000>;
+			};
+		};
+
+		smmu: iommu@3000000 {
+			compatible = "arm,mmu-500";
+			reg = <0x03000000 0x80000>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <2>;
+		};
+	};
+
+	crmu: crmu {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x66400000 0x100000>;
+
+		#include "stingray-clock.dtsi"
+
+		otp: otp@1c400 {
+			compatible = "brcm,ocotp-v2";
+			reg = <0x0001c400 0x68>;
+			brcm,ocotp-size = <2048>;
+			status = "okay";
+		};
+
+		cdru: syscon@1d000 {
+			compatible = "brcm,sr-cdru", "syscon";
+			reg = <0x0001d000 0x400>;
+		};
+
+		gpio_crmu: gpio@24800 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x00024800 0x4c>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+	};
+
+	#include "stingray-fs4.dtsi"
+	#include "stingray-pcie.dtsi"
+	#include "stingray-usb.dtsi"
+
+	hsls {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x68900000 0x17700000>;
+
+		#include "stingray-pinctrl.dtsi"
+
+		mdio_mux_iproc: mdio-mux@20000 {
+			compatible = "brcm,mdio-mux-iproc";
+			reg = <0x00020000 0x250>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 { /* PCIe serdes */
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@3 { /* USB */
+				reg = <0x3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@10 { /* RGMII */
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		pwm: pwm@10000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x00010000 0x1000>;
+			clocks = <&crmu_ref25m>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		timer0: timer@30000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00030000 0x1000>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer1: timer@40000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00040000 0x1000>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer2: timer@50000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00050000 0x1000>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer3: timer@60000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00060000 0x1000>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer4: timer@70000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00070000 0x1000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer5: timer@80000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00080000 0x1000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer6: timer@90000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00090000 0x1000>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer7: timer@a0000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x000a0000 0x1000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		i2c0: i2c@b0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x000b0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@c0000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x000c0000 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			timeout-sec = <60>;
+		};
+
+		gpio_hsls: gpio@d0000 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x000d0000 0x864>;
+			ngpios = <151>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinmux 0 0 16>,
+					<&pinmux 16 71 2>,
+					<&pinmux 18 131 8>,
+					<&pinmux 26 83 6>,
+					<&pinmux 32 123 4>,
+					<&pinmux 36 43 24>,
+					<&pinmux 60 89 2>,
+					<&pinmux 62 73 4>,
+					<&pinmux 66 95 28>,
+					<&pinmux 94 127 4>,
+					<&pinmux 98 139 10>,
+					<&pinmux 108 16 27>,
+					<&pinmux 135 77 6>,
+					<&pinmux 141 67 4>,
+					<&pinmux 145 149 6>;
+		};
+
+		i2c1: i2c@e0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x000e0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		uart0: serial@100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00100000 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <25000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@110000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00110000 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <25000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@120000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00120000 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <25000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@130000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00130000 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <25000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ssp0: spi@180000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x00180000 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssp1: spi@190000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x00190000 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hwrng: hwrng@220000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x00220000 0x28>;
+		};
+
+		dma0: dma-controller@310000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x00310000 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&hsls_div2_clk>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu 0x6000 0x0000>;
+		};
+
+		enet: ethernet@340000 {
+			compatible = "brcm,amac";
+			reg = <0x00340000 0x1000>;
+			reg-names = "amac_base";
+			dma-coherent;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		nand: nand@360000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x00360000 0x600>,
+			      <0x0050a408 0x600>,
+			      <0x00360f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			brcm,nand-has-wp;
+			status = "disabled";
+		};
+
+		sdio0: sdhci@3f1000 {
+			compatible = "brcm,sdhci-iproc";
+			reg = <0x003f1000 0x100>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+			clocks = <&sdio0_clk>;
+			iommus = <&smmu 0x6002 0x0000>;
+			status = "disabled";
+		};
+
+		sdio1: sdhci@3f2000 {
+			compatible = "brcm,sdhci-iproc";
+			reg = <0x003f2000 0x100>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+			clocks = <&sdio1_clk>;
+			iommus = <&smmu 0x6003 0x0000>;
+			status = "disabled";
+		};
+	};
+
+	tmons {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x8f100000 0x100>;
+
+		tmon: tmon@0 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x0 0x40>;
+			brcm,tmon-mask = <0x3f>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		ihost0_thermal: ihost0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 0>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost1_thermal: ihost1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 1>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost2_thermal: ihost2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 2>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost3_thermal: ihost3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 3>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		crmu_thermal: crmu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 4>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		nitro_thermal: nitro-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 5>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	nic-hsls {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0  0x0 0x7fffffff>;
+
+		nic_i2c0: i2c@60826100 {
+			compatible = "brcm,iproc-nic-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x60826100 0x100>,
+			      <0x60e00408 0x1000>;
+			brcm,ape-hsls-addr-mask = <0x03400000>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/Makefile b/arch/arm64/boot/dts/cavium/Makefile
new file mode 100644
index 0000000000..c178f7e06e
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
+dtb-$(CONFIG_ARCH_THUNDER2) += thunder2-99xx.dtb
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dts b/arch/arm64/boot/dts/cavium/thunder-88xx.dts
new file mode 100644
index 0000000000..5ec2bfa5f7
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dts
@@ -0,0 +1,67 @@
+/*
+ * Cavium Thunder DTS file - Thunder board description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "thunder-88xx.dtsi"
+
+/ {
+	model = "Cavium ThunderX CN88XX board";
+	compatible = "cavium,thunder-88xx";
+
+	aliases {
+		serial0 = &uaa0;
+		serial1 = &uaa1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
new file mode 100644
index 0000000000..8ad31dee11
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -0,0 +1,416 @@
+/*
+ * Cavium Thunder DTS file - Thunder SoC description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "cavium,thunder-88xx";
+	interrupt-parent = <&gic0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x000>;
+			enable-method = "psci";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x001>;
+			enable-method = "psci";
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x002>;
+			enable-method = "psci";
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x003>;
+			enable-method = "psci";
+		};
+		cpu@4 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x004>;
+			enable-method = "psci";
+		};
+		cpu@5 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x005>;
+			enable-method = "psci";
+		};
+		cpu@6 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x006>;
+			enable-method = "psci";
+		};
+		cpu@7 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x007>;
+			enable-method = "psci";
+		};
+		cpu@8 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x008>;
+			enable-method = "psci";
+		};
+		cpu@9 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x009>;
+			enable-method = "psci";
+		};
+		cpu@a {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00a>;
+			enable-method = "psci";
+		};
+		cpu@b {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00b>;
+			enable-method = "psci";
+		};
+		cpu@c {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00c>;
+			enable-method = "psci";
+		};
+		cpu@d {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00d>;
+			enable-method = "psci";
+		};
+		cpu@e {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00e>;
+			enable-method = "psci";
+		};
+		cpu@f {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00f>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+		cpu@104 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x104>;
+			enable-method = "psci";
+		};
+		cpu@105 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x105>;
+			enable-method = "psci";
+		};
+		cpu@106 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x106>;
+			enable-method = "psci";
+		};
+		cpu@107 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x107>;
+			enable-method = "psci";
+		};
+		cpu@108 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x108>;
+			enable-method = "psci";
+		};
+		cpu@109 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x109>;
+			enable-method = "psci";
+		};
+		cpu@10a {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10a>;
+			enable-method = "psci";
+		};
+		cpu@10b {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10b>;
+			enable-method = "psci";
+		};
+		cpu@10c {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10c>;
+			enable-method = "psci";
+		};
+		cpu@10d {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10d>;
+			enable-method = "psci";
+		};
+		cpu@10e {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10e>;
+			enable-method = "psci";
+		};
+		cpu@10f {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10f>;
+			enable-method = "psci";
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x201>;
+			enable-method = "psci";
+		};
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x202>;
+			enable-method = "psci";
+		};
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x203>;
+			enable-method = "psci";
+		};
+		cpu@204 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x204>;
+			enable-method = "psci";
+		};
+		cpu@205 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x205>;
+			enable-method = "psci";
+		};
+		cpu@206 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x206>;
+			enable-method = "psci";
+		};
+		cpu@207 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x207>;
+			enable-method = "psci";
+		};
+		cpu@208 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x208>;
+			enable-method = "psci";
+		};
+		cpu@209 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x209>;
+			enable-method = "psci";
+		};
+		cpu@20a {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20a>;
+			enable-method = "psci";
+		};
+		cpu@20b {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20b>;
+			enable-method = "psci";
+		};
+		cpu@20c {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20c>;
+			enable-method = "psci";
+		};
+		cpu@20d {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20d>;
+			enable-method = "psci";
+		};
+		cpu@20e {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20e>;
+			enable-method = "psci";
+		};
+		cpu@20f {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20f>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+		             <1 14 4>,
+		             <1 11 4>,
+		             <1 10 4>;
+	};
+
+	pmu {
+		compatible = "cavium,thunder-pmu", "arm,armv8-pmuv3";
+		interrupts = <1 7 4>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		refclk50mhz: refclk50mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "refclk50mhz";
+		};
+
+		gic0: interrupt-controller@8010,00000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interrupt-controller;
+			reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
+			      <0x8010 0x80000000 0x0 0x600000>; /* GICR */
+			interrupts = <1 9 0xf04>;
+
+			its: msi-controller@801000020000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0x8010 0x20000 0x0 0x200000>;
+			};
+		};
+
+		uaa0: serial@87e0,24000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x87e0 0x24000000 0x0 0x1000>;
+			interrupts = <1 21 4>;
+			clocks = <&refclk50mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		uaa1: serial@87e0,25000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x87e0 0x25000000 0x0 0x1000>;
+			interrupts = <1 22 4>;
+			clocks = <&refclk50mhz>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dts b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
new file mode 100644
index 0000000000..d005e1e79c
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for Cavium ThunderX2 CN99XX Evaluation Platform
+ *
+ * Copyright (c) 2017 Cavium Inc.
+ * Copyright (c) 2013-2016 Broadcom
+ */
+
+/dts-v1/;
+
+#include "thunder2-99xx.dtsi"
+
+/ {
+	model = "Cavium ThunderX2 CN99XX";
+	compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x0 0x80000000>,  /* 2G @ 2G  */
+		      <0x00000008 0x80000000 0x0 0x80000000>;  /* 2G @ 34G */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
new file mode 100644
index 0000000000..3419bd2526
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dtsi file for Cavium ThunderX2 CN99XX processor
+ *
+ * Copyright (c) 2017 Cavium Inc.
+ * Copyright (c) 2013-2016 Broadcom
+ * Author: Zi Shen Lim <zlim@broadcom.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Cavium ThunderX2 CN99XX";
+	compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* just 4 cpus now, 128 needed in full config */
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "cavium,thunder2", "brcm,vulcan";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "cavium,thunder2", "brcm,vulcan";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "cavium,thunder2", "brcm,vulcan";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "cavium,thunder2", "brcm,vulcan";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@4000080000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		reg = <0x04 0x00080000 0x0 0x20000>,	/* GICD */
+		      <0x04 0x01000000 0x0 0x1000000>;	/* GICR */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gicits: msi-controller@4000100000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x04 0x00100000 0x0 0x20000>;	/* GIC ITS */
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "brcm,vulcan-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; /* PMU overflow */
+	};
+
+	clk125mhz: uart_clk125mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk125mhz";
+	};
+
+	pcie@30000000 {
+		compatible = "pci-host-ecam-generic";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* ECAM at 0x3000_0000 - 0x4000_0000 */
+		reg = <0x0 0x30000000  0x0 0x10000000>;
+		reg-names = "PCI ECAM";
+
+		/*
+		 * PCI ranges:
+		 *   IO		no supported
+		 *   MEM        0x4000_0000 - 0x6000_0000
+		 *   MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
+		 */
+		ranges =
+		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
+		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
+		bus-range = <0 0xff>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map =
+		      /* addr  pin  ic   icaddr  icintr */
+			<0 0 0  1  &gic   0 0    GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  2  &gic   0 0    GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  3  &gic   0 0    GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  4  &gic   0 0    GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		msi-parent = <&gicits>;
+		dma-coherent;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@402020000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x04 0x02020000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk125mhz>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
new file mode 100644
index 0000000000..6e4ba69268
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+	exynos5433-tm2.dtb		\
+	exynos5433-tm2e.dtb		\
+	exynos7-espresso.dtb		\
+	exynos7885-jackpotlte.dtb	\
+	exynos850-e850-96.dtb		\
+	exynosautov9-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos-pinctrl.h b/arch/arm64/boot/dts/exynos/exynos-pinctrl.h
new file mode 100644
index 0000000000..7dd94a9b36
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos-pinctrl.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung Exynos DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__
+
+#define EXYNOS_PIN_PULL_NONE		0
+#define EXYNOS_PIN_PULL_DOWN		1
+#define EXYNOS_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define EXYNOS_PIN_PDN_OUT0		0
+#define EXYNOS_PIN_PDN_OUT1		1
+#define EXYNOS_PIN_PDN_INPUT		2
+#define EXYNOS_PIN_PDN_PREV		3
+
+/*
+ * Drive strengths for Exynos5410, Exynos542x, Exynos5800, Exynos7885, Exynos850
+ * (except GPIO_HSI block), ExynosAutov9 (FSI0, PERIC1)
+ */
+#define EXYNOS5420_PIN_DRV_LV1		0
+#define EXYNOS5420_PIN_DRV_LV2		1
+#define EXYNOS5420_PIN_DRV_LV3		2
+#define EXYNOS5420_PIN_DRV_LV4		3
+
+/* Drive strengths for Exynos5433 */
+#define EXYNOS5433_PIN_DRV_FAST_SR1	0
+#define EXYNOS5433_PIN_DRV_FAST_SR2	1
+#define EXYNOS5433_PIN_DRV_FAST_SR3	2
+#define EXYNOS5433_PIN_DRV_FAST_SR4	3
+#define EXYNOS5433_PIN_DRV_FAST_SR5	4
+#define EXYNOS5433_PIN_DRV_FAST_SR6	5
+#define EXYNOS5433_PIN_DRV_SLOW_SR1	8
+#define EXYNOS5433_PIN_DRV_SLOW_SR2	9
+#define EXYNOS5433_PIN_DRV_SLOW_SR3	0xa
+#define EXYNOS5433_PIN_DRV_SLOW_SR4	0xb
+#define EXYNOS5433_PIN_DRV_SLOW_SR5	0xc
+#define EXYNOS5433_PIN_DRV_SLOW_SR6	0xf
+
+/* Drive strengths for Exynos7 (except FSYS1) */
+#define EXYNOS7_PIN_DRV_LV1		0
+#define EXYNOS7_PIN_DRV_LV2		2
+#define EXYNOS7_PIN_DRV_LV3		1
+#define EXYNOS7_PIN_DRV_LV4		3
+
+/* Drive strengths for Exynos7 FSYS1 block */
+#define EXYNOS7_FSYS1_PIN_DRV_LV1	0
+#define EXYNOS7_FSYS1_PIN_DRV_LV2	4
+#define EXYNOS7_FSYS1_PIN_DRV_LV3	2
+#define EXYNOS7_FSYS1_PIN_DRV_LV4	6
+#define EXYNOS7_FSYS1_PIN_DRV_LV5	1
+#define EXYNOS7_FSYS1_PIN_DRV_LV6	5
+
+/* Drive strengths for Exynos850 GPIO_HSI block */
+#define EXYNOS850_HSI_PIN_DRV_LV1	0	/* 1x   */
+#define EXYNOS850_HSI_PIN_DRV_LV1_5	1	/* 1.5x */
+#define EXYNOS850_HSI_PIN_DRV_LV2	2	/* 2x   */
+#define EXYNOS850_HSI_PIN_DRV_LV2_5	3	/* 2.5x */
+#define EXYNOS850_HSI_PIN_DRV_LV3	4	/* 3x   */
+#define EXYNOS850_HSI_PIN_DRV_LV4	5	/* 4x   */
+
+#define EXYNOS_PIN_FUNC_INPUT		0
+#define EXYNOS_PIN_FUNC_OUTPUT		1
+#define EXYNOS_PIN_FUNC_2		2
+#define EXYNOS_PIN_FUNC_3		3
+#define EXYNOS_PIN_FUNC_4		4
+#define EXYNOS_PIN_FUNC_5		5
+#define EXYNOS_PIN_FUNC_6		6
+#define EXYNOS_PIN_FUNC_EINT		0xf
+#define EXYNOS_PIN_FUNC_F		EXYNOS_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__ */
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
new file mode 100644
index 0000000000..540b4d6c90
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5433 SoC Memory interface and AMBA bus device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ */
+
+/ {
+	bus_g2d_400: bus0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_G2D_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_400_opp_table>;
+		status = "disabled";
+	};
+
+	bus_g2d_266: bus1 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_G2D_266>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_266_opp_table>;
+		status = "disabled";
+	};
+
+	bus_gscl: bus2 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_GSCL_333>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_gscl_opp_table>;
+		status = "disabled";
+	};
+
+	bus_hevc: bus3 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_HEVC_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_hevc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_jpeg: bus4 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_SCLK_JPEG_MSCL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_400_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus5 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_MFC_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_400_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mscl: bus6 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_MSCL_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_400_opp_table>;
+		status = "disabled";
+	};
+
+	bus_noc0: bus7 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_hevc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_noc1: bus8 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_hevc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_noc2: bus9 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_mif CLK_ACLK_BUS2_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_noc2_opp_table>;
+		status = "disabled";
+	};
+
+	bus_g2d_400_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1075000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <962500>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <937500>;
+		};
+	};
+
+	bus_g2d_266_opp_table: opp-table-3 {
+		compatible = "operating-points-v2";
+
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
+
+	bus_gscl_opp_table: opp-table-4 {
+		compatible = "operating-points-v2";
+
+		opp-333000000 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+		opp-222000000 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp-166500000 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+	};
+
+	bus_hevc_opp_table: opp-table-5 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
+
+	bus_noc2_opp_table: opp-table-6 {
+		compatible = "operating-points-v2";
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
new file mode 100644
index 0000000000..681553577e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -0,0 +1,799 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ */
+
+#include "exynos-pinctrl.h"
+
+#define PIN(_pin, _func, _pull, _drv)					\
+	pin- ## _pin {							\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>;		\
+	}
+
+#define PIN_IN(_pin, _pull, _drv)					\
+	PIN(_pin, INPUT, _pull, _drv)
+
+#define PIN_OT(_pin, _pull, _drv)					\
+	PIN(_pin, OUTPUT, _pull, _drv)
+
+#define PIN_F2(_pin, _pull, _drv)					\
+	PIN(_pin, 2, _pull, _drv)
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpz0: gpz0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+				"gpz0-4", "gpz0-5", "gpz0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pcm0_bus: pcm0-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	uart_aud_bus: uart-aud-bus-pins {
+		samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_cpif {
+	gpv6: gpv6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_ese {
+	gpj2: gpj2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_finger {
+	gpd5: gpd5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_fsys {
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr4: gpr4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr0: gpr0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_rdqs: sd0-rdqs-pins {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_qrdy: sd0-qrdy-pins {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_bus8: sd1-bus-width8-pins {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	pcie_bus: pcie-bus-pins {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_clk_output: sd2-clk-output-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_cmd_output: sd2-cmd-output-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_imem {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_peric {
+	gpv7: gpv7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus-pins {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus-pins {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+				"gpd4-3", "gpd4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pcm1_bus: pcm1-bus-pins {
+		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+				"gpd4-3", "gpd4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spdif_bus: spdif-bus-pins {
+		samsung,pins = "gpd4-3", "gpd4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_spi_pin0: fimc-is-spi-pin0-pins {
+		samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_spi_pin1: fimc-is-spi-pin1-pins {
+		samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpd2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpd2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpd2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpd2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus-pins {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus-pins {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_uart: fimc-is-uart-pins {
+		samsung,pins = "gpc1-1", "gpc0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch0_i2c: fimc-is-ch0-i2c-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch0_mclk: fimc-is-ch0-mclk-pins {
+		samsung,pins = "gpd7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch1_i2c: fimc-is-ch1-i2c-pins {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch1_mclk: fimc-is-ch1-mclk-pins {
+		samsung,pins = "gpd7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch2_i2c: fimc-is-ch2-i2c-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch2_mclk: fimc-is-ch2-mclk-pins {
+		samsung,pins = "gpd7-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
new file mode 100644
index 0000000000..d163891cd3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -0,0 +1,1379 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Common device tree source file for Samsung's TM2 and TM2E boards
+ * which are based on Samsung Exynos5433 SoC.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+
+/ {
+	aliases {
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		gsc2 = &gsc_2;
+		mmc0 = &mshc_0;
+		mmc2 = &mshc_2;
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_cpif;
+		pinctrl3 = &pinctrl_ese;
+		pinctrl4 = &pinctrl_finger;
+		pinctrl5 = &pinctrl_fsys;
+		pinctrl6 = &pinctrl_imem;
+		pinctrl7 = &pinctrl_nfc;
+		pinctrl8 = &pinctrl_peric;
+		pinctrl9 = &pinctrl_touch;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		spi3 = &spi_3;
+		spi4 = &spi_4;
+	};
+
+	chosen {
+		stdout-path = &serial_1;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x0 0x20000000 0x0 0xc0000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+		};
+
+		volume-up-key {
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume-up key";
+			debounce-interval = <10>;
+		};
+
+		volume-down-key {
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume-down key";
+			debounce-interval = <10>;
+		};
+
+		homepage-key {
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "homepage key";
+			debounce-interval = <10>;
+		};
+	};
+
+	i2c_max98504: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		max98504: amplifier@31 {
+			compatible = "maxim,max98504";
+			reg = <0x31>;
+
+			DIOVDD-supply = <&ldo3_reg>;
+			DVDD-supply = <&ldo3_reg>;
+			PVDD-supply = <&vph_pwr_regulator>;
+		};
+	};
+
+	vph_pwr_regulator: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "VPH_PWR";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+	};
+
+	irda_regulator: regulator-irda {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
+		regulator-name = "irda_regulator";
+	};
+
+	sound {
+		compatible = "samsung,tm2-audio";
+		audio-codec = <&wm5110>, <&hdmi>;
+		i2s-controller = <&i2s0 0>, <&i2s1 0>;
+		audio-amplifier = <&max98504>;
+		mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+		model = "wm5110";
+		samsung,audio-routing =
+			/* Headphone */
+			"HP", "HPOUT1L",
+			"HP", "HPOUT1R",
+
+			/* Speaker */
+			"SPK", "SPKOUT",
+			"SPKOUT", "HPOUT2L",
+			"SPKOUT", "HPOUT2R",
+
+			/* Receiver */
+			"RCV", "HPOUT3L",
+			"RCV", "HPOUT3R";
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+
+	thermistor-ap {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor-charger {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 2>;
+	};
+};
+
+&bus_g2d_400 {
+	devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
+	vdd-supply = <&buck4_reg>;
+	exynos,saturation-ratio = <10>;
+	status = "okay";
+};
+
+&bus_g2d_266 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_gscl {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_hevc {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_jpeg {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_mscl {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_noc0 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_noc1 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_noc2 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&cmu_aud {
+	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+		<&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
+		<&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
+		<&cmu_top CLK_MOUT_AUD_PLL>,
+		<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+		<&cmu_top CLK_MOUT_SCLK_AUDIO0>,
+		<&cmu_top CLK_MOUT_SCLK_AUDIO1>,
+		<&cmu_top CLK_MOUT_SCLK_SPDIF>,
+
+		<&cmu_aud CLK_DIV_AUD_CA5>,
+		<&cmu_aud CLK_DIV_ACLK_AUD>,
+		<&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_UART>,
+		<&cmu_top CLK_DIV_SCLK_AUDIO0>,
+		<&cmu_top CLK_DIV_SCLK_AUDIO1>,
+		<&cmu_top CLK_DIV_SCLK_PCM1>,
+		<&cmu_top CLK_DIV_SCLK_I2S1>;
+
+	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
+		<&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+		<&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+		<&cmu_top CLK_FOUT_AUD_PLL>,
+		<&cmu_top CLK_MOUT_AUD_PLL>,
+		<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+		<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+		<&cmu_top CLK_SCLK_AUDIO0>;
+
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+		<196608001>, <65536001>, <32768001>, <49152001>,
+		<2048001>, <24576001>, <196608001>,
+		<24576001>, <98304001>, <2048001>, <49152001>;
+};
+
+&cmu_fsys {
+	assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+		<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
+		<&cmu_top CLK_DIV_SCLK_USBDRD30>,
+		<&cmu_top CLK_DIV_SCLK_USBHOST30>;
+	assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+		<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+			       <66700000>, <66700000>;
+};
+
+&cmu_gscl {
+	assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
+			  <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
+				 <&cmu_top CLK_ACLK_GSCL_333>;
+};
+
+&cmu_mfc {
+	assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
+};
+
+&cmu_mif {
+	assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
+	assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
+	assigned-clock-rates = <0>, <333000000>;
+};
+
+&cmu_mscl {
+	assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
+			  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+			  <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
+			  <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
+				 <&cmu_top CLK_SCLK_JPEG_MSCL>,
+				 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+				 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+};
+
+&cmu_top {
+	assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
+	assigned-clock-rates = <196608001>;
+};
+
+&cpu0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+	status = "okay";
+};
+
+&decon_tv {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			tv_to_hdmi: endpoint {
+				remote-endpoint = <&hdmi_to_tv>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo7_reg>;
+	samsung,burst-clock-frequency = <512000000>;
+	samsung,esc-clock-frequency = <16000000>;
+	samsung,pll-clock-frequency = <24000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&te_irq>;
+};
+
+&gpu {
+	mali-supply = <&buck6_reg>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			hdmi_to_tv: endpoint {
+				remote-endpoint = <&tv_to_hdmi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi_to_mhl: endpoint {
+				remote-endpoint = <&mhl_to_hdmi>;
+			};
+		};
+	};
+};
+
+&hsi2c_0 {
+	status = "okay";
+	clock-frequency = <2500000>;
+
+	pmic@66 {
+		compatible = "samsung,s2mps13-pmic";
+		interrupt-parent = <&gpa0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x66>;
+		samsung,s2mps11-wrstbi-ground;
+		wakeup-source;
+
+		s2mps13_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_0.9V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_MMC2_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD1_E_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD10_DPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MIPI2L_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD18_MIPI2L_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD18_LLI_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD33_USB30_3.0V_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_INT_M_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_KFC_M_1.1V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_G3D_M_0.95V_AP";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDDQ_EFUSE";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "V_TFLASH_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "V_CODEC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDDA_1.8V_COMP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "CAM_IO_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "CAM_SEN_CORE_1.05V_AP";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VT_CAM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "UNUSED_LDO25";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "CAM_AF_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VCC_3.0V_LCD_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VCC_1.8V_LCD_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "VT_CAM_2.8V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "TSP_AVDD_3.3V_AP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo31_reg: LDO31 {
+				/*
+				 * LDO31 differs from target to target,
+				 * its definition is in the .dts
+				 */
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VTOUCH_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VTOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VCC_1.8V_MHL_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <2100000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "OIS_VM_2.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo36_reg: LDO36 {
+				regulator-name = "VSIL_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo37_reg: LDO37 {
+				regulator-name = "VF_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo38_reg: LDO38 {
+				/*
+				 * LDO38 differs from target to target,
+				 * its definition is in the .dts
+				 */
+			};
+
+			ldo39_reg: LDO39 {
+				regulator-name = "V_HRM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo40_reg: LDO40 {
+				regulator-name = "V_HRM_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_EGL_1.0V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_KFC_1.0V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_INT_0.95V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_G3D_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VDD_MEM1_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VDD_LLDO_1.35V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDD_MLDO_2.0V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_mem2";
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&hsi2c_4 {
+	status = "okay";
+
+	s3fwrn5: nfc@27 {
+		compatible = "samsung,s3fwrn5-i2c";
+		reg = <0x27>;
+		interrupt-parent = <&gpa1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&hsi2c_5 {
+	status = "okay";
+
+	stmfts: touchscreen@49 {
+		compatible = "st,stmfts";
+		reg = <0x49>;
+		interrupt-parent = <&gpa1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&ldo30_reg>;
+		vdd-supply = <&ldo31_reg>;
+	};
+};
+
+&hsi2c_7 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	bridge@39 {
+		reg = <0x39>;
+		compatible = "sil,sii8620";
+		cvcc10-supply = <&ldo36_reg>;
+		iovcc18-supply = <&ldo34_reg>;
+		interrupt-parent = <&gpf0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "xtal";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				mhl_to_hdmi: endpoint {
+					remote-endpoint = <&hdmi_to_mhl>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				mhl_to_musb_con: endpoint {
+					remote-endpoint = <&musb_con_to_mhl>;
+				};
+			};
+		};
+	};
+};
+
+&hsi2c_8 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "maxim,max77843";
+		interrupt-parent = <&gpa1>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x66>;
+
+		muic: extcon {
+			compatible = "maxim,max77843-muic";
+
+			musb_con: connector {
+				compatible = "samsung,usb-connector-11pin",
+					     "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						/*
+						 * TODO: The DTS this is based on does not have
+						 * port@0 which is a required property. The ports
+						 * look incomplete and need fixing.
+						 * Add a disabled port just to satisfy dtschema.
+						 */
+						reg = <0>;
+						status = "disabled";
+					};
+
+					port@3 {
+						reg = <3>;
+						musb_con_to_mhl: endpoint {
+							remote-endpoint = <&mhl_to_musb_con>;
+						};
+					};
+				};
+			};
+
+			ports {
+				port {
+					muic_to_usb: endpoint {
+						remote-endpoint = <&usb_to_muic>;
+					};
+				};
+			};
+		};
+
+		regulators {
+			compatible = "maxim,max77843-regulator";
+			safeout1_reg: SAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			safeout2_reg: SAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <100000>;
+				regulator-max-microamp = <3150000>;
+			};
+		};
+
+		haptic: motor-driver {
+			compatible = "maxim,max77843-haptic";
+			haptic-supply = <&ldo38_reg>;
+			pwms = <&pwm 0 33670 0>;
+		};
+	};
+};
+
+&hsi2c_11 {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
+	status = "okay";
+};
+
+&mshc_0 {
+	status = "okay";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 3>;
+	samsung,read-strobe-delay = <90>;
+	fifo-depth = <0x80>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+			&sd0_bus8 &sd0_rdqs>;
+	bus-width = <8>;
+	assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+	assigned-clock-rates = <800000000>;
+};
+
+&mshc_2 {
+	status = "okay";
+	cap-sd-highspeed;
+	disable-wp;
+	cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	fifo-depth = <0x80>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+};
+
+&pcie {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+	vdd10-supply = <&ldo6_reg>;
+	vdd18-supply = <&ldo7_reg>;
+	assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
+			  <&cmu_top CLK_MOUT_SCLK_PCIE_100>;
+	assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+				 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+	assigned-clock-rates = <0>, <100000000>;
+	interrupt-map-mask = <0 0 0 0>;
+	interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&ppmu_d0_general {
+	status = "okay";
+	events {
+		ppmu_event0_d0_general: ppmu-event0-d0-general {
+			event-name = "ppmu-event0-d0-general";
+		};
+	};
+};
+
+&ppmu_d1_general {
+	status = "okay";
+	events {
+		ppmu_event0_d1_general: ppmu-event0-d1-general {
+		       event-name = "ppmu-event0-d1-general";
+	       };
+	};
+};
+
+&pinctrl_alive {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_alive>;
+
+	initial_alive: initial-state {
+		PIN_IN(gpa0-0, DOWN, FAST_SR1);
+		PIN_IN(gpa0-1, NONE, FAST_SR1);
+		PIN_IN(gpa0-2, DOWN, FAST_SR1);
+		PIN_IN(gpa0-3, NONE, FAST_SR1);
+		PIN_IN(gpa0-4, NONE, FAST_SR1);
+		PIN_IN(gpa0-5, DOWN, FAST_SR1);
+		PIN_IN(gpa0-6, NONE, FAST_SR1);
+		PIN_IN(gpa0-7, NONE, FAST_SR1);
+
+		PIN_IN(gpa1-0, UP, FAST_SR1);
+		PIN_IN(gpa1-1, UP, FAST_SR1);
+		PIN_IN(gpa1-2, NONE, FAST_SR1);
+		PIN_IN(gpa1-3, DOWN, FAST_SR1);
+		PIN_IN(gpa1-4, DOWN, FAST_SR1);
+		PIN_IN(gpa1-5, NONE, FAST_SR1);
+		PIN_IN(gpa1-6, NONE, FAST_SR1);
+		PIN_IN(gpa1-7, NONE, FAST_SR1);
+
+		PIN_IN(gpa2-0, NONE, FAST_SR1);
+		PIN_IN(gpa2-1, NONE, FAST_SR1);
+		PIN_IN(gpa2-2, NONE, FAST_SR1);
+		PIN_IN(gpa2-3, DOWN, FAST_SR1);
+		PIN_IN(gpa2-4, NONE, FAST_SR1);
+		PIN_IN(gpa2-5, DOWN, FAST_SR1);
+		PIN_IN(gpa2-6, DOWN, FAST_SR1);
+		PIN_IN(gpa2-7, NONE, FAST_SR1);
+
+		PIN_IN(gpa3-0, DOWN, FAST_SR1);
+		PIN_IN(gpa3-1, DOWN, FAST_SR1);
+		PIN_IN(gpa3-2, NONE, FAST_SR1);
+		PIN_IN(gpa3-3, DOWN, FAST_SR1);
+		PIN_IN(gpa3-4, NONE, FAST_SR1);
+		PIN_IN(gpa3-5, DOWN, FAST_SR1);
+		PIN_IN(gpa3-6, DOWN, FAST_SR1);
+		PIN_IN(gpa3-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpf1-0, NONE, FAST_SR1);
+		PIN_IN(gpf1-1, NONE, FAST_SR1);
+		PIN_IN(gpf1-2, DOWN, FAST_SR1);
+		PIN_IN(gpf1-4, UP, FAST_SR1);
+		PIN_OT(gpf1-5, NONE, FAST_SR1);
+		PIN_IN(gpf1-6, DOWN, FAST_SR1);
+		PIN_IN(gpf1-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpf2-0, DOWN, FAST_SR1);
+		PIN_IN(gpf2-1, DOWN, FAST_SR1);
+		PIN_IN(gpf2-2, DOWN, FAST_SR1);
+		PIN_IN(gpf2-3, DOWN, FAST_SR1);
+
+		PIN_IN(gpf3-0, DOWN, FAST_SR1);
+		PIN_IN(gpf3-1, DOWN, FAST_SR1);
+		PIN_IN(gpf3-2, NONE, FAST_SR1);
+		PIN_IN(gpf3-3, DOWN, FAST_SR1);
+
+		PIN_IN(gpf4-0, DOWN, FAST_SR1);
+		PIN_IN(gpf4-1, DOWN, FAST_SR1);
+		PIN_IN(gpf4-2, DOWN, FAST_SR1);
+		PIN_IN(gpf4-3, DOWN, FAST_SR1);
+		PIN_IN(gpf4-4, DOWN, FAST_SR1);
+		PIN_IN(gpf4-5, DOWN, FAST_SR1);
+		PIN_IN(gpf4-6, DOWN, FAST_SR1);
+		PIN_IN(gpf4-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpf5-0, DOWN, FAST_SR1);
+		PIN_IN(gpf5-1, DOWN, FAST_SR1);
+		PIN_IN(gpf5-2, DOWN, FAST_SR1);
+		PIN_IN(gpf5-3, DOWN, FAST_SR1);
+		PIN_OT(gpf5-4, NONE, FAST_SR1);
+		PIN_IN(gpf5-5, DOWN, FAST_SR1);
+		PIN_IN(gpf5-6, DOWN, FAST_SR1);
+		PIN_IN(gpf5-7, DOWN, FAST_SR1);
+	};
+
+	te_irq: te-irq-pins {
+		samsung,pins = "gpf1-3";
+		samsung,pin-function = <0xf>;
+	};
+};
+
+&pinctrl_cpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_cpif>;
+
+	initial_cpif: initial-state {
+		PIN_IN(gpv6-0, DOWN, FAST_SR1);
+		PIN_IN(gpv6-1, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_ese {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_ese>;
+
+	pcie_wlanen: pcie-wlanen-pins {
+		samsung,pins = "gpj2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	initial_ese: initial-state {
+		PIN_IN(gpj2-1, DOWN, FAST_SR1);
+		PIN_IN(gpj2-2, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_fsys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_fsys>;
+
+	initial_fsys: initial-state {
+		PIN_IN(gpr3-0, NONE, FAST_SR1);
+		PIN_IN(gpr3-1, DOWN, FAST_SR1);
+		PIN_IN(gpr3-2, DOWN, FAST_SR1);
+		PIN_IN(gpr3-3, DOWN, FAST_SR1);
+		PIN_IN(gpr3-7, NONE, FAST_SR1);
+	};
+};
+
+&pinctrl_imem {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_imem>;
+
+	initial_imem: initial-state {
+		PIN_IN(gpf0-0, UP, FAST_SR1);
+		PIN_IN(gpf0-1, UP, FAST_SR1);
+		PIN_IN(gpf0-2, DOWN, FAST_SR1);
+		PIN_IN(gpf0-3, UP, FAST_SR1);
+		PIN_IN(gpf0-4, DOWN, FAST_SR1);
+		PIN_IN(gpf0-5, NONE, FAST_SR1);
+		PIN_IN(gpf0-6, DOWN, FAST_SR1);
+		PIN_IN(gpf0-7, UP, FAST_SR1);
+	};
+};
+
+&pinctrl_nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_nfc>;
+
+	initial_nfc: initial-state {
+		PIN_IN(gpj0-2, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_peric {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_peric>;
+
+	initial_peric: initial-state {
+		PIN_IN(gpv7-0, DOWN, FAST_SR1);
+		PIN_IN(gpv7-1, DOWN, FAST_SR1);
+		PIN_IN(gpv7-2, NONE, FAST_SR1);
+		PIN_IN(gpv7-3, DOWN, FAST_SR1);
+		PIN_IN(gpv7-4, DOWN, FAST_SR1);
+		PIN_IN(gpv7-5, DOWN, FAST_SR1);
+
+		PIN_IN(gpb0-4, DOWN, FAST_SR1);
+
+		PIN_IN(gpc0-2, DOWN, FAST_SR1);
+		PIN_IN(gpc0-5, DOWN, FAST_SR1);
+		PIN_IN(gpc0-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpc1-1, DOWN, FAST_SR1);
+
+		PIN_IN(gpc3-4, NONE, FAST_SR1);
+		PIN_IN(gpc3-5, NONE, FAST_SR1);
+		PIN_IN(gpc3-6, NONE, FAST_SR1);
+		PIN_IN(gpc3-7, NONE, FAST_SR1);
+
+		PIN_OT(gpg0-0, NONE, FAST_SR1);
+		PIN_F2(gpg0-1, DOWN, FAST_SR1);
+
+		PIN_IN(gpd2-5, DOWN, FAST_SR1);
+
+		PIN_IN(gpd4-0, NONE, FAST_SR1);
+		PIN_IN(gpd4-1, DOWN, FAST_SR1);
+		PIN_IN(gpd4-2, DOWN, FAST_SR1);
+		PIN_IN(gpd4-3, DOWN, FAST_SR1);
+		PIN_IN(gpd4-4, DOWN, FAST_SR1);
+
+		PIN_IN(gpd6-3, DOWN, FAST_SR1);
+
+		PIN_IN(gpd8-1, UP, FAST_SR1);
+
+		PIN_IN(gpg1-0, DOWN, FAST_SR1);
+		PIN_IN(gpg1-1, DOWN, FAST_SR1);
+		PIN_IN(gpg1-2, DOWN, FAST_SR1);
+		PIN_IN(gpg1-3, DOWN, FAST_SR1);
+		PIN_IN(gpg1-4, DOWN, FAST_SR1);
+
+		PIN_IN(gpg2-0, DOWN, FAST_SR1);
+		PIN_IN(gpg2-1, DOWN, FAST_SR1);
+
+		PIN_IN(gpg3-0, DOWN, FAST_SR1);
+		PIN_IN(gpg3-1, DOWN, FAST_SR1);
+		PIN_IN(gpg3-5, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_touch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_touch>;
+
+	initial_touch: initial-state {
+		PIN_IN(gpj1-2, DOWN, FAST_SR1);
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mic {
+	status = "okay";
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&xxti>;
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps13_osc S2MPS11_CLK_BT>;
+		clock-names = "extclk";
+	};
+};
+
+&spi_1 {
+	cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	wm5110: audio-codec@0 {
+		compatible = "wlf,wm5110";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		clocks = <&pmu_system_controller 0>,
+			<&s2mps13_osc S2MPS11_CLK_BT>;
+		clock-names = "mclk1", "mclk2";
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		wlf,micd-detect-debounce = <300>;
+		wlf,micd-bias-start-time = <0x1>;
+		wlf,micd-rate = <0x7>;
+		wlf,micd-dbtime = <0x2>;
+		wlf,micd-force-micbias;
+		wlf,micd-configs = <0x0 1 0>;
+		wlf,hpdet-channel = <1>;
+		wlf,gpsw = <0x1>;
+		wlf,inmode = <2 0 2 0>;
+
+		wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+		wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+		/* core supplies */
+		AVDD-supply = <&ldo18_reg>;
+		DBVDD1-supply = <&ldo18_reg>;
+		CPVDD-supply = <&ldo18_reg>;
+		DBVDD2-supply = <&ldo18_reg>;
+		DBVDD3-supply = <&ldo18_reg>;
+		SPKVDDL-supply = <&vph_pwr_regulator>;
+		SPKVDDR-supply = <&vph_pwr_regulator>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+	};
+};
+
+&spi_3 {
+	status = "okay";
+	no-cs-readback;
+
+	irled@0 {
+		compatible = "ir-spi-led";
+		reg = <0x0>;
+		spi-max-frequency = <5000000>;
+		power-supply = <&irda_regulator>;
+		duty-cycle = /bits/ 8 <60>;
+		led-active-low;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+	};
+};
+
+&timer {
+	clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_apollo {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_g3d {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&usbdrd30 {
+	vdd33-supply = <&ldo10_reg>;
+	vdd10-supply = <&ldo6_reg>;
+	status = "okay";
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+	vbus-supply = <&safeout1_reg>;
+	status = "okay";
+
+	port {
+		usb_to_muic: endpoint {
+			remote-endpoint = <&muic_to_usb>;
+		};
+	};
+};
+
+&xxti {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
new file mode 100644
index 0000000000..aca01709fd
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ */
+
+#include "exynos5433-tm2-common.dtsi"
+
+/ {
+	model = "Samsung TM2 board";
+	compatible = "samsung,tm2", "samsung,exynos5433";
+	chassis-type = "handset";
+};
+
+&cmu_disp {
+	/*
+	 * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+	 * clocks properties for DISP CMU for each board to keep them together
+	 * for easier review and maintenance.
+	 */
+	assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+			  <&cmu_disp CLK_MOUT_DISP_PLL>,
+			  <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSD_USER>;
+	assigned-clock-parents = <0>, <0>,
+				 <&cmu_mif CLK_ACLK_DISP_333>,
+				 <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+				 <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+				 <&cmu_disp CLK_FOUT_DISP_PLL>,
+				 <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+				 <&cmu_mif CLK_SCLK_DSD_DISP>;
+	assigned-clock-rates = <250000000>, <400000000>;
+};
+
+&dsi {
+	panel@0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+
+	touchkey@20 {
+		compatible = "cypress,tm2-touchkey";
+		reg = <0x20>;
+		interrupt-parent = <&gpa3>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&ldo32_reg>;
+		vdd-supply = <&ldo33_reg>;
+	};
+};
+
+&ldo31_reg {
+	regulator-name = "TSP_VDD_1.85V_AP";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <1850000>;
+};
+
+&ldo38_reg {
+	regulator-name = "VCC_3.0V_MOTOR_AP";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&stmfts {
+	touchscreen-size-x = <1439>;
+	touchscreen-size-y = <2559>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
new file mode 100644
index 0000000000..22d26460f3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5433 TM2E board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
+ * Samsung Exynos5433 SoC.
+ */
+
+#include "exynos5433-tm2-common.dtsi"
+
+/ {
+	model = "Samsung TM2E board";
+	compatible = "samsung,tm2e", "samsung,exynos5433";
+	chassis-type = "handset";
+};
+
+&cmu_disp {
+	/*
+	 * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+	 * clocks properties for DISP CMU for each board to keep them together
+	 * for easier review and maintenance.
+	 */
+	assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+			  <&cmu_disp CLK_MOUT_DISP_PLL>,
+			  <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+	assigned-clock-parents = <0>, <0>,
+				 <&cmu_mif CLK_ACLK_DISP_333>,
+				 <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+				 <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+				 <&cmu_disp CLK_FOUT_DISP_PLL>,
+				 <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+	assigned-clock-rates = <278000000>, <400000000>;
+};
+
+&dsi {
+	panel@0 {
+		compatible = "samsung,s6e3hf2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ldo31_reg {
+	regulator-name = "TSP_VDD_1.8V_AP";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&ldo38_reg {
+	regulator-name = "VCC_3.3V_MOTOR_AP";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&stmfts {
+	touchscreen-size-x = <1599>;
+	touchscreen-size-y = <2559>;
+	touch-key-connected;
+	ledvdd-supply = <&ldo33_reg>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
new file mode 100644
index 0000000000..81b72393dd
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree sources for Exynos5433 thermal zone
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+	atlas0_thermal: atlas0-thermal {
+		thermal-sensors = <&tmu_atlas0>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas0_alert_0: atlas0-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_1: atlas0-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_2: atlas0-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_3: atlas0-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_4: atlas0-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_5: atlas0-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_6: atlas0-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1800MHz  */
+				trip = <&atlas0_alert_0>;
+				cooling-device = <&cpu4 1 2>, <&cpu5 1 2>,
+						 <&cpu6 1 2>, <&cpu7 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1700MHz  */
+				trip = <&atlas0_alert_1>;
+				cooling-device = <&cpu4 2 3>, <&cpu5 2 3>,
+						 <&cpu6 2 3>, <&cpu7 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1600MHz  */
+				trip = <&atlas0_alert_2>;
+				cooling-device = <&cpu4 3 4>, <&cpu5 3 4>,
+						 <&cpu6 3 4>, <&cpu7 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 1500MHz  */
+				trip = <&atlas0_alert_3>;
+				cooling-device = <&cpu4 4 5>, <&cpu5 4 5>,
+						 <&cpu6 4 5>, <&cpu7 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 1400MHz  */
+				trip = <&atlas0_alert_4>;
+				cooling-device = <&cpu4 5 7>, <&cpu5 5 7>,
+						 <&cpu6 5 7>, <&cpu7 5 7>;
+			};
+			map5 {
+				/* Set maximum frequencyas 1200MHz  */
+				trip = <&atlas0_alert_5>;
+				cooling-device = <&cpu4 7 9>, <&cpu5 7 9>,
+						 <&cpu6 7 9>, <&cpu7 7 9>;
+			};
+			map6 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&atlas0_alert_6>;
+				cooling-device = <&cpu4 9 14>, <&cpu5 9 14>,
+						 <&cpu6 9 14>, <&cpu7 9 14>;
+			};
+		};
+	};
+
+	atlas1_thermal: atlas1-thermal {
+		thermal-sensors = <&tmu_atlas1>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas1_alert_0: atlas1-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_1: atlas1-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_2: atlas1-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_3: atlas1-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_4: atlas1-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_5: atlas1-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_6: atlas1-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	g3d_thermal: g3d-thermal {
+		thermal-sensors = <&tmu_g3d>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			g3d_alert_0: g3d-alert-0 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_1: g3d-alert-1 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_2: g3d-alert-2 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_3: g3d-alert-3 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_4: g3d-alert-4 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_5: g3d-alert-5 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_6: g3d-alert-6 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	apollo_thermal: apollo-thermal {
+		thermal-sensors = <&tmu_apollo>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			apollo_alert_0: apollo-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_1: apollo-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_2: apollo-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_3: apollo-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_4: apollo-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_5: apollo-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_6: apollo-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1200MHz  */
+				trip = <&apollo_alert_2>;
+				cooling-device = <&cpu0 1 2>, <&cpu1 1 2>,
+						 <&cpu2 1 2>, <&cpu3 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1100MHz  */
+				trip = <&apollo_alert_3>;
+				cooling-device = <&cpu0 2 3>, <&cpu1 2 3>,
+						 <&cpu2 2 3>, <&cpu3 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&apollo_alert_4>;
+				cooling-device = <&cpu0 3 4>, <&cpu1 3 4>,
+						 <&cpu2 3 4>, <&cpu3 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 900MHz  */
+				trip = <&apollo_alert_5>;
+				cooling-device = <&cpu0 4 5>, <&cpu1 4 5>,
+						 <&cpu2 4 5>, <&cpu3 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 800MHz  */
+				trip = <&apollo_alert_6>;
+				cooling-device = <&cpu0 5 9>, <&cpu1 5 9>,
+						 <&cpu2 5 9>, <&cpu3 5 9>;
+			};
+		};
+	};
+
+	isp_thermal: isp-thermal {
+		thermal-sensors = <&tmu_isp>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			isp_alert_0: isp-alert-0 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_1: isp-alert-1 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_2: isp-alert-2 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_3: isp-alert-3 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_4: isp-alert-4 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_5: isp-alert-5 {
+				temperature = <105000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_6: isp-alert-6 {
+				temperature = <110000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
new file mode 100644
index 0000000000..91ae0462a7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -0,0 +1,1980 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5433 SoC device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos5433 SoC device nodes are listed in this file.
+ * Exynos5433 based board files can include this file and provide
+ * values for board specific bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos5433 SoC. As device tree coverage for Exynos5433 increases,
+ * additional nodes can be added to this file.
+ */
+
+#include <dt-bindings/clock/exynos5433.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos5433";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	arm-a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	arm-a57-pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	xxti: clock {
+		/* XXTI */
+		compatible = "fixed-clock";
+		clock-output-names = "oscclk";
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+			clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
+			clock-names = "apolloclk";
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			enable-method = "psci";
+			reg = <0x0>;
+			clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
+			clock-names = "atlasclk";
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			enable-method = "psci";
+			reg = <0x1>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			enable-method = "psci";
+			reg = <0x2>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			enable-method = "psci";
+			reg = <0x3>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
+		};
+
+		cluster_a57_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		cluster_a53_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+		};
+	};
+
+	cluster_a53_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1112500>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1112500>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	cluster_a57_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <912500>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <912500>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <937500>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1012500>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1037500>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1062500>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1087500>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1125000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1137500>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1175000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1212500>;
+		};
+		opp-1900000000 {
+			opp-hz = /bits/ 64 <1900000000>;
+			opp-microvolt = <1262500>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		cmu_top: clock-controller@10030000 {
+			compatible = "samsung,exynos5433-cmu-top";
+			reg = <0x10030000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_mphy_pll",
+				"sclk_mfc_pll",
+				"sclk_bus_pll";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_MPHY_PLL>,
+				<&cmu_mif CLK_SCLK_MFC_PLL>,
+				<&cmu_mif CLK_SCLK_BUS_PLL>;
+		};
+
+		cmu_cpif: clock-controller@10fc0000 {
+			compatible = "samsung,exynos5433-cmu-cpif";
+			reg = <0x10fc0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk";
+			clocks = <&xxti>;
+		};
+
+		cmu_mif: clock-controller@105b0000 {
+			compatible = "samsung,exynos5433-cmu-mif";
+			reg = <0x105b0000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_mphy_pll";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_MPHY_PLL>;
+		};
+
+		cmu_peric: clock-controller@14c80000 {
+			compatible = "samsung,exynos5433-cmu-peric";
+			reg = <0x14c80000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_peris: clock-controller@10040000 {
+			compatible = "samsung,exynos5433-cmu-peris";
+			reg = <0x10040000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_fsys: clock-controller@156e0000 {
+			compatible = "samsung,exynos5433-cmu-fsys";
+			reg = <0x156e0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_ufs_mphy",
+				"aclk_fsys_200",
+				"sclk_pcie_100_fsys",
+				"sclk_ufsunipro_fsys",
+				"sclk_mmc2_fsys",
+				"sclk_mmc1_fsys",
+				"sclk_mmc0_fsys",
+				"sclk_usbhost30_fsys",
+				"sclk_usbdrd30_fsys";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_UFS_MPHY>,
+				<&cmu_top CLK_ACLK_FSYS_200>,
+				<&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+				<&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
+				<&cmu_top CLK_SCLK_MMC2_FSYS>,
+				<&cmu_top CLK_SCLK_MMC1_FSYS>,
+				<&cmu_top CLK_SCLK_MMC0_FSYS>,
+				<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+				<&cmu_top CLK_SCLK_USBDRD30_FSYS>;
+		};
+
+		cmu_g2d: clock-controller@12460000 {
+			compatible = "samsung,exynos5433-cmu-g2d";
+			reg = <0x12460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_g2d_266",
+				"aclk_g2d_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_G2D_266>,
+				<&cmu_top CLK_ACLK_G2D_400>;
+			power-domains = <&pd_g2d>;
+		};
+
+		cmu_disp: clock-controller@13b90000 {
+			compatible = "samsung,exynos5433-cmu-disp";
+			reg = <0x13b90000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_dsim1_disp",
+				"sclk_dsim0_disp",
+				"sclk_dsd_disp",
+				"sclk_decon_tv_eclk_disp",
+				"sclk_decon_vclk_disp",
+				"sclk_decon_eclk_disp",
+				"sclk_decon_tv_vclk_disp",
+				"aclk_disp_333";
+			clocks = <&xxti>,
+				<&cmu_mif CLK_SCLK_DSIM1_DISP>,
+				<&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				<&cmu_mif CLK_SCLK_DSD_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
+				<&cmu_mif CLK_ACLK_DISP_333>;
+			power-domains = <&pd_disp>;
+		};
+
+		cmu_aud: clock-controller@114c0000 {
+			compatible = "samsung,exynos5433-cmu-aud";
+			reg = <0x114c0000 0x1000>;
+			#clock-cells = <1>;
+			clock-names = "oscclk", "fout_aud_pll";
+			clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
+			power-domains = <&pd_aud>;
+		};
+
+		cmu_bus0: clock-controller@13600000 {
+			compatible = "samsung,exynos5433-cmu-bus0";
+			reg = <0x13600000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "aclk_bus0_400";
+			clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+		};
+
+		cmu_bus1: clock-controller@14800000 {
+			compatible = "samsung,exynos5433-cmu-bus1";
+			reg = <0x14800000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "aclk_bus1_400";
+			clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+		};
+
+		cmu_bus2: clock-controller@13400000 {
+			compatible = "samsung,exynos5433-cmu-bus2";
+			reg = <0x13400000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_bus2_400";
+			clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
+		};
+
+		cmu_g3d: clock-controller@14aa0000 {
+			compatible = "samsung,exynos5433-cmu-g3d";
+			reg = <0x14aa0000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_g3d_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
+			power-domains = <&pd_g3d>;
+		};
+
+		cmu_gscl: clock-controller@13cf0000 {
+			compatible = "samsung,exynos5433-cmu-gscl";
+			reg = <0x13cf0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_gscl_111",
+				"aclk_gscl_333";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_GSCL_111>,
+				<&cmu_top CLK_ACLK_GSCL_333>;
+			power-domains = <&pd_gscl>;
+		};
+
+		cmu_apollo: clock-controller@11900000 {
+			compatible = "samsung,exynos5433-cmu-apollo";
+			reg = <0x11900000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "sclk_bus_pll_apollo";
+			clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
+		};
+
+		cmu_atlas: clock-controller@11800000 {
+			compatible = "samsung,exynos5433-cmu-atlas";
+			reg = <0x11800000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "sclk_bus_pll_atlas";
+			clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
+		};
+
+		cmu_mscl: clock-controller@150d0000 {
+			compatible = "samsung,exynos5433-cmu-mscl";
+			reg = <0x150d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_jpeg_mscl",
+				"aclk_mscl_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_SCLK_JPEG_MSCL>,
+				<&cmu_top CLK_ACLK_MSCL_400>;
+			power-domains = <&pd_mscl>;
+		};
+
+		cmu_mfc: clock-controller@15280000 {
+			compatible = "samsung,exynos5433-cmu-mfc";
+			reg = <0x15280000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_mfc_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
+			power-domains = <&pd_mfc>;
+		};
+
+		cmu_hevc: clock-controller@14f80000 {
+			compatible = "samsung,exynos5433-cmu-hevc";
+			reg = <0x14f80000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_hevc_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
+			power-domains = <&pd_hevc>;
+		};
+
+		cmu_isp: clock-controller@146d0000 {
+			compatible = "samsung,exynos5433-cmu-isp";
+			reg = <0x146d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_isp_dis_400",
+				"aclk_isp_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_ISP_DIS_400>,
+				<&cmu_top CLK_ACLK_ISP_400>;
+			power-domains = <&pd_isp>;
+		};
+
+		cmu_cam0: clock-controller@120d0000 {
+			compatible = "samsung,exynos5433-cmu-cam0";
+			reg = <0x120d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_cam0_333",
+				"aclk_cam0_400",
+				"aclk_cam0_552";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_CAM0_333>,
+				<&cmu_top CLK_ACLK_CAM0_400>,
+				<&cmu_top CLK_ACLK_CAM0_552>;
+			power-domains = <&pd_cam0>;
+		};
+
+		cmu_cam1: clock-controller@145d0000 {
+			compatible = "samsung,exynos5433-cmu-cam1";
+			reg = <0x145d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_isp_uart_cam1",
+				"sclk_isp_spi1_cam1",
+				"sclk_isp_spi0_cam1",
+				"aclk_cam1_333",
+				"aclk_cam1_400",
+				"aclk_cam1_552";
+			clocks = <&xxti>,
+				<&cmu_top CLK_SCLK_ISP_UART_CAM1>,
+				<&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
+				<&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
+				<&cmu_top CLK_ACLK_CAM1_333>,
+				<&cmu_top CLK_ACLK_CAM1_400>,
+				<&cmu_top CLK_ACLK_CAM1_552>;
+			power-domains = <&pd_cam1>;
+		};
+
+		cmu_imem: clock-controller@11060000 {
+			compatible = "samsung,exynos5433-cmu-imem";
+			reg = <0x11060000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_imem_sssx_266",
+				"aclk_imem_266",
+				"aclk_imem_200";
+			clocks = <&xxti>,
+				<&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
+				<&cmu_top CLK_DIV_ACLK_IMEM_266>,
+				<&cmu_top CLK_DIV_ACLK_IMEM_200>;
+		};
+
+		slim_sss: slim-sss@11140000 {
+			compatible = "samsung,exynos5433-slim-sss";
+			reg = <0x11140000 0x1000>;
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk";
+			clocks = <&cmu_imem CLK_PCLK_SLIMSSS>,
+				 <&cmu_imem CLK_ACLK_SLIMSSS>;
+		};
+
+		pd_gscl: power-domain@105c4000 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4000 0x20>;
+			#power-domain-cells = <0>;
+			label = "GSCL";
+		};
+
+		pd_cam0: power-domain@105c4020 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4020 0x20>;
+			#power-domain-cells = <0>;
+			power-domains = <&pd_cam1>;
+			label = "CAM0";
+		};
+
+		pd_mscl: power-domain@105c4040 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4040 0x20>;
+			#power-domain-cells = <0>;
+			label = "MSCL";
+		};
+
+		pd_g3d: power-domain@105c4060 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4060 0x20>;
+			#power-domain-cells = <0>;
+			label = "G3D";
+		};
+
+		pd_disp: power-domain@105c4080 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4080 0x20>;
+			#power-domain-cells = <0>;
+			label = "DISP";
+		};
+
+		pd_cam1: power-domain@105c40a0 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c40a0 0x20>;
+			#power-domain-cells = <0>;
+			label = "CAM1";
+		};
+
+		pd_aud: power-domain@105c40c0 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c40c0 0x20>;
+			#power-domain-cells = <0>;
+			label = "AUD";
+		};
+
+		pd_g2d: power-domain@105c4120 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4120 0x20>;
+			#power-domain-cells = <0>;
+			label = "G2D";
+		};
+
+		pd_isp: power-domain@105c4140 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4140 0x20>;
+			#power-domain-cells = <0>;
+			power-domains = <&pd_cam0>;
+			label = "ISP";
+		};
+
+		pd_mfc: power-domain@105c4180 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4180 0x20>;
+			#power-domain-cells = <0>;
+			label = "MFC";
+		};
+
+		pd_hevc: power-domain@105c41c0 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c41c0 0x20>;
+			#power-domain-cells = <0>;
+			label = "HEVC";
+		};
+
+		tmu_atlas0: tmu@10060000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10060000 0x200>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		tmu_atlas1: tmu@10068000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10068000 0x200>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		tmu_g3d: tmu@10070000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10070000 0x200>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		tmu_apollo: tmu@10078000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10078000 0x200>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		tmu_isp: tmu@1007c000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x1007c000 0x200>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		timer@101c0000 {
+			compatible = "samsung,exynos5433-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x101c0000 0x800>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		ppmu_d0_cpu: ppmu@10480000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x10480000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d0_general: ppmu@10490000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x10490000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d1_cpu: ppmu@104b0000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x104b0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d1_general: ppmu@104c0000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x104c0000 0x2000>;
+			status = "disabled";
+		};
+
+		pinctrl_alive: pinctrl@10580000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_aud: pinctrl@114b0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x114b0000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_aud>;
+		};
+
+		pinctrl_cpif: pinctrl@10fe0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x10fe0000 0x1000>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ese: pinctrl@14ca0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14ca0000 0x1000>;
+			interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_finger: pinctrl@14cb0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cb0000 0x1000>;
+			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys: pinctrl@15690000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x15690000 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_imem: pinctrl@11090000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x11090000 0x1000>;
+			interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nfc: pinctrl@14cd0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cd0000 0x1000>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric: pinctrl@14cc0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cc0000 0x1100>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_touch: pinctrl@14ce0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14ce0000 0x1100>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@105c0000 {
+			compatible = "samsung,exynos5433-pmu", "simple-mfd", "syscon";
+			reg = <0x105c0000 0x5008>;
+			#clock-cells = <1>;
+			clock-names = "clkout16";
+			clocks = <&xxti>;
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,exynos5433-mipi-video-phy";
+				#phy-cells = <1>;
+				samsung,cam0-sysreg = <&syscon_cam0>;
+				samsung,cam1-sysreg = <&syscon_cam1>;
+				samsung,disp-sysreg = <&syscon_disp>;
+			};
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x400>; /* SWRESET */
+				mask = <0x1>;
+			};
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x11001000 0x1000>,
+				<0x11002000 0x2000>,
+				<0x11004000 0x2000>,
+				<0x11006000 0x2000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		decon: decon@13800000 {
+			compatible = "samsung,exynos5433-decon";
+			reg = <0x13800000 0x2104>;
+			clocks = <&cmu_disp CLK_PCLK_DECON>,
+				<&cmu_disp CLK_ACLK_DECON>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_ACLK_XIU_DECON0X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+				<&cmu_disp CLK_ACLK_XIU_DECON1X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+				<&cmu_disp CLK_SCLK_DECON_VCLK>,
+				<&cmu_disp CLK_SCLK_DECON_ECLK>,
+				<&cmu_disp CLK_SCLK_DSD>;
+			clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
+				"aclk_xiu_decon0x", "pclk_smmu_decon0x",
+				"aclk_smmu_decon1x", "aclk_xiu_decon1x",
+				"pclk_smmu_decon1x", "sclk_decon_vclk",
+				"sclk_decon_eclk", "dsd";
+			power-domains = <&pd_disp>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,disp-sysreg = <&syscon_disp>;
+			status = "disabled";
+			iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+			iommu-names = "m0", "m1";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					decon_to_mic: endpoint {
+						remote-endpoint =
+							<&mic_to_decon>;
+					};
+				};
+			};
+		};
+
+		decon_tv: decon@13880000 {
+			compatible = "samsung,exynos5433-decon-tv";
+			reg = <0x13880000 0x20b8>;
+			clocks = <&cmu_disp CLK_PCLK_DECON_TV>,
+				 <&cmu_disp CLK_ACLK_DECON_TV>,
+				 <&cmu_disp CLK_ACLK_SMMU_TV0X>,
+				 <&cmu_disp CLK_ACLK_XIU_TV0X>,
+				 <&cmu_disp CLK_PCLK_SMMU_TV0X>,
+				 <&cmu_disp CLK_ACLK_SMMU_TV1X>,
+				 <&cmu_disp CLK_ACLK_XIU_TV1X>,
+				 <&cmu_disp CLK_PCLK_SMMU_TV1X>,
+				 <&cmu_disp CLK_SCLK_DECON_TV_VCLK>,
+				 <&cmu_disp CLK_SCLK_DECON_TV_ECLK>,
+				 <&cmu_disp CLK_SCLK_DSD>;
+			clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
+				      "aclk_xiu_decon0x", "pclk_smmu_decon0x",
+				      "aclk_smmu_decon1x", "aclk_xiu_decon1x",
+				      "pclk_smmu_decon1x", "sclk_decon_vclk",
+				      "sclk_decon_eclk", "dsd";
+			samsung,disp-sysreg = <&syscon_disp>;
+			power-domains = <&pd_disp>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			iommus = <&sysmmu_tv0x>, <&sysmmu_tv1x>;
+			iommu-names = "m0", "m1";
+		};
+
+		dsi: dsi@13900000 {
+			compatible = "samsung,exynos5433-mipi-dsi";
+			reg = <0x13900000 0xc0>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+				<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+				<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+				<&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+				<&cmu_disp CLK_SCLK_DSIM0>;
+			clock-names = "bus_clk",
+					"phyclk_mipidphy0_bitclkdiv8",
+					"phyclk_mipidphy0_rxclkesc0",
+					"sclk_rgb_vclk_to_dsim0",
+					"sclk_mipi";
+			power-domains = <&pd_disp>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_to_mic: endpoint {
+						remote-endpoint = <&mic_to_dsi>;
+					};
+				};
+			};
+		};
+
+		mic: mic@13930000 {
+			compatible = "samsung,exynos5433-mic";
+			reg = <0x13930000 0x48>;
+			clocks = <&cmu_disp CLK_PCLK_MIC0>,
+				<&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+			clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+			power-domains = <&pd_disp>;
+			samsung,disp-syscon = <&syscon_disp>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mic_to_decon: endpoint {
+						remote-endpoint =
+							<&decon_to_mic>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					mic_to_dsi: endpoint {
+						remote-endpoint = <&dsi_to_mic>;
+					};
+				};
+			};
+		};
+
+		hdmi: hdmi@13970000 {
+			compatible = "samsung,exynos5433-hdmi";
+			reg = <0x13970000 0x70000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_disp CLK_PCLK_HDMI>,
+				<&cmu_disp CLK_PCLK_HDMIPHY>,
+				<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+				<&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+				<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+				<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+				<&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+				<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+				<&xxti>, <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+			clock-names = "hdmi_pclk", "hdmi_i_pclk",
+				"i_tmds_clk", "i_pixel_clk",
+				"tmds_clko", "tmds_clko_user",
+				"pixel_clko", "pixel_clko_user",
+				"oscclk", "i_spdif_clk";
+			phy = <&hdmiphy>;
+			ddc = <&hsi2c_11>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,sysreg-phandle = <&syscon_disp>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		hdmiphy: hdmiphy@13af0000 {
+			reg = <0x13af0000 0x80>;
+		};
+
+		syscon_disp: syscon@13b80000 {
+			compatible = "samsung,exynos5433-disp-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
+			reg = <0x13b80000 0x1010>;
+		};
+
+		syscon_cam0: syscon@120f0000 {
+			compatible = "samsung,exynos5433-cam0-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
+			reg = <0x120f0000 0x1020>;
+		};
+
+		syscon_cam1: syscon@145f0000 {
+			compatible = "samsung,exynos5433-cam1-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
+			reg = <0x145f0000 0x1038>;
+		};
+
+		syscon_fsys: syscon@156f0000 {
+			compatible = "samsung,exynos5433-fsys-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
+			reg = <0x156f0000 0x1044>;
+		};
+
+		gsc_0: video-scaler@13c00000 {
+			compatible = "samsung,exynos5433-gsc";
+			reg = <0x13c00000 0x1000>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu",
+				      "aclk_gsclbend", "gsd";
+			clocks = <&cmu_gscl CLK_PCLK_GSCL0>,
+				 <&cmu_gscl CLK_ACLK_GSCL0>,
+				 <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+				 <&cmu_gscl CLK_ACLK_GSCLBEND_333>,
+				 <&cmu_gscl CLK_ACLK_GSD>;
+			iommus = <&sysmmu_gscl0>;
+			power-domains = <&pd_gscl>;
+		};
+
+		gsc_1: video-scaler@13c10000 {
+			compatible = "samsung,exynos5433-gsc";
+			reg = <0x13c10000 0x1000>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu",
+				      "aclk_gsclbend", "gsd";
+			clocks = <&cmu_gscl CLK_PCLK_GSCL1>,
+				 <&cmu_gscl CLK_ACLK_GSCL1>,
+				 <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+				 <&cmu_gscl CLK_ACLK_GSCLBEND_333>,
+				 <&cmu_gscl CLK_ACLK_GSD>;
+			iommus = <&sysmmu_gscl1>;
+			power-domains = <&pd_gscl>;
+		};
+
+		gsc_2: video-scaler@13c20000 {
+			compatible = "samsung,exynos5433-gsc";
+			reg = <0x13c20000 0x1000>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu",
+				      "aclk_gsclbend", "gsd";
+			clocks = <&cmu_gscl CLK_PCLK_GSCL2>,
+				 <&cmu_gscl CLK_ACLK_GSCL2>,
+				 <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+				 <&cmu_gscl CLK_ACLK_GSCLBEND_333>,
+				 <&cmu_gscl CLK_ACLK_GSD>;
+			iommus = <&sysmmu_gscl2>;
+			power-domains = <&pd_gscl>;
+		};
+
+		gpu: gpu@14ac0000 {
+			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			reg = <0x14ac0000 0x5000>;
+			interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&cmu_g3d CLK_ACLK_G3D>;
+			clock-names = "core";
+			power-domains = <&pd_g3d>;
+			operating-points-v2 = <&gpu_opp_table>;
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-160000000 {
+					opp-hz = /bits/ 64 <160000000>;
+					opp-microvolt = <1000000>;
+				};
+				opp-267000000 {
+					opp-hz = /bits/ 64 <267000000>;
+					opp-microvolt = <1000000>;
+				};
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-microvolt = <1025000>;
+				};
+				opp-420000000 {
+					opp-hz = /bits/ 64 <420000000>;
+					opp-microvolt = <1025000>;
+				};
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-microvolt = <1075000>;
+				};
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-microvolt = <1125000>;
+				};
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					opp-microvolt = <1150000>;
+				};
+				opp-700000000 {
+					opp-hz = /bits/ 64 <700000000>;
+					opp-microvolt = <1150000>;
+				};
+			};
+		};
+
+		scaler_0: scaler@15000000 {
+			compatible = "samsung,exynos5433-scaler";
+			reg = <0x15000000 0x1294>;
+			interrupts = <0 402 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu";
+			clocks = <&cmu_mscl CLK_PCLK_M2MSCALER0>,
+				 <&cmu_mscl CLK_ACLK_M2MSCALER0>,
+				 <&cmu_mscl CLK_ACLK_XIU_MSCLX>;
+			iommus = <&sysmmu_scaler_0>;
+			power-domains = <&pd_mscl>;
+		};
+
+		scaler_1: scaler@15010000 {
+			compatible = "samsung,exynos5433-scaler";
+			reg = <0x15010000 0x1294>;
+			interrupts = <0 403 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu";
+			clocks = <&cmu_mscl CLK_PCLK_M2MSCALER1>,
+				 <&cmu_mscl CLK_ACLK_M2MSCALER1>,
+				 <&cmu_mscl CLK_ACLK_XIU_MSCLX>;
+			iommus = <&sysmmu_scaler_1>;
+			power-domains = <&pd_mscl>;
+		};
+
+		jpeg: codec@15020000 {
+			compatible = "samsung,exynos5433-jpeg";
+			reg = <0x15020000 0x10000>;
+			interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu", "sclk";
+			clocks = <&cmu_mscl CLK_PCLK_JPEG>,
+				 <&cmu_mscl CLK_ACLK_JPEG>,
+				 <&cmu_mscl CLK_ACLK_XIU_MSCLX>,
+				 <&cmu_mscl CLK_SCLK_JPEG>;
+			iommus = <&sysmmu_jpeg>;
+			power-domains = <&pd_mscl>;
+		};
+
+		mfc: codec@152e0000 {
+			compatible = "samsung,exynos5433-mfc";
+			reg = <0x152e0000 0x10000>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu";
+			clocks = <&cmu_mfc CLK_PCLK_MFC>,
+				 <&cmu_mfc CLK_ACLK_MFC>,
+				 <&cmu_mfc CLK_ACLK_XIU_MFCX>;
+			iommus = <&sysmmu_mfc_0>, <&sysmmu_mfc_1>;
+			iommu-names = "left", "right";
+			power-domains = <&pd_mfc>;
+		};
+
+		sysmmu_decon0x: sysmmu@13a00000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a00000 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON0X>;
+			power-domains = <&pd_disp>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_decon1x: sysmmu@13a10000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a10000 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON1X>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_disp>;
+		};
+
+		sysmmu_tv0x: sysmmu@13a20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a20000 0x1000>;
+			interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_disp CLK_ACLK_SMMU_TV0X>,
+				<&cmu_disp CLK_PCLK_SMMU_TV0X>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_disp>;
+		};
+
+		sysmmu_tv1x: sysmmu@13a30000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a30000 0x1000>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_disp CLK_ACLK_SMMU_TV1X>,
+				<&cmu_disp CLK_PCLK_SMMU_TV1X>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_disp>;
+		};
+
+		sysmmu_gscl0: sysmmu@13c80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13c80000 0x1000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
+				 <&cmu_gscl CLK_PCLK_SMMU_GSCL0>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_gscl>;
+		};
+
+		sysmmu_gscl1: sysmmu@13c90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13c90000 0x1000>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
+				 <&cmu_gscl CLK_PCLK_SMMU_GSCL1>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_gscl>;
+		};
+
+		sysmmu_gscl2: sysmmu@13ca0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13ca0000 0x1000>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
+				 <&cmu_gscl CLK_PCLK_SMMU_GSCL2>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_gscl>;
+		};
+
+		sysmmu_scaler_0: sysmmu@15040000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15040000 0x1000>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>,
+				<&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mscl>;
+		};
+
+		sysmmu_scaler_1: sysmmu@15050000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15050000 0x1000>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>,
+				<&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mscl>;
+		};
+
+		sysmmu_jpeg: sysmmu@15060000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15060000 0x1000>;
+			interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mscl CLK_ACLK_SMMU_JPEG>,
+				<&cmu_mscl CLK_PCLK_SMMU_JPEG>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mscl>;
+		};
+
+		sysmmu_mfc_0: sysmmu@15200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15200000 0x1000>;
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_0>,
+				<&cmu_mfc CLK_PCLK_SMMU_MFC_0>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mfc>;
+		};
+
+		sysmmu_mfc_1: sysmmu@15210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15210000 0x1000>;
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_1>,
+				<&cmu_mfc CLK_PCLK_SMMU_MFC_1>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mfc>;
+		};
+
+		serial_0: serial@14c10000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c10000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_UART0>,
+				<&cmu_peric CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_UART1>,
+				<&cmu_peric CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_UART2>,
+				<&cmu_peric CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@14d20000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d20000 0x100>;
+			interrupts = <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 9>, <&pdma0 8>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI0>,
+				<&cmu_peric CLK_SCLK_SPI0>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_1: spi@14d30000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d30000 0x100>;
+			interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 11>, <&pdma0 10>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI1>,
+				<&cmu_peric CLK_SCLK_SPI1>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_2: spi@14d40000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d40000 0x100>;
+			interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 13>, <&pdma0 12>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI2>,
+				<&cmu_peric CLK_SCLK_SPI2>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_3: spi@14d50000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d50000 0x100>;
+			interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 23>, <&pdma0 22>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI3>,
+				<&cmu_peric CLK_SCLK_SPI3>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI3>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_4: spi@14d00000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d00000 0x100>;
+			interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 25>, <&pdma0 24>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI4>,
+				<&cmu_peric CLK_SCLK_SPI4>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI4>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi4_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		adc: adc@14d10000 {
+			compatible = "samsung,exynos7-adc";
+			reg = <0x14d10000 0x100>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "adc";
+			clocks = <&cmu_peric CLK_PCLK_ADCIF>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@14d60000 {
+			compatible = "samsung,exynos7-i2s";
+			reg = <0x14d60000 0x100>;
+			dmas = <&pdma0 31>, <&pdma0 30>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_I2S1>,
+				 <&cmu_peric CLK_PCLK_I2S1>,
+				 <&cmu_peric CLK_SCLK_I2S1>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		pwm: pwm@14dd0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x14dd0000 0x100>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			clocks = <&cmu_peric CLK_PCLK_PWM>;
+			clock-names = "timers";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		hsi2c_0: i2c@14e40000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e40000 0x1000>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: i2c@14e50000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e50000 0x1000>;
+			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@14e60000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e60000 0x1000>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@14e70000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e70000 0x1000>;
+			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@14ec0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ec0000 0x1000>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@14ed0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ed0000 0x1000>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@14ee0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ee0000 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@14ef0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ef0000 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_8: i2c@14d90000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14d90000 0x1000>;
+			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c8_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C8>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_9: i2c@14da0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14da0000 0x1000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c9_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C9>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_10: i2c@14de0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14de0000 0x1000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c10_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C10>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_11: i2c@14df0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14df0000 0x1000>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c11_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C11>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		usbdrd30: usb@15400000 {
+			compatible = "samsung,exynos5433-dwusb3";
+			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
+				<&cmu_fsys CLK_SCLK_USBDRD30>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>;
+			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x15400000 0x10000>;
+			status = "disabled";
+
+			usbdrd_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
+					<&cmu_fsys CLK_ACLK_USBDRD30>,
+					<&cmu_fsys CLK_SCLK_USBDRD30>;
+				clock-names = "ref", "bus_early", "suspend";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd30_phy: phy@15500000 {
+			compatible = "samsung,exynos5433-usbdrd-phy";
+			reg = <0x15500000 0x100>;
+			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
+				<&cmu_fsys CLK_SCLK_USBDRD30>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+					"itp";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbhost30_phy: phy@15580000 {
+			compatible = "samsung,exynos5433-usbdrd-phy";
+			reg = <0x15580000 0x100>;
+			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
+				<&cmu_fsys CLK_SCLK_USBHOST30>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+					"itp";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbhost30: usb@15a00000 {
+			compatible = "samsung,exynos5433-dwusb3";
+			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
+				<&cmu_fsys CLK_SCLK_USBHOST30>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>;
+			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x15a00000 0x10000>;
+			status = "disabled";
+
+			usbhost_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
+					<&cmu_fsys CLK_ACLK_USBHOST30>,
+					<&cmu_fsys CLK_SCLK_USBHOST30>;
+				clock-names = "ref", "bus_early", "suspend";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		mshc_0: mmc@15540000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15540000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC0>,
+				<&cmu_fsys CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mshc_1: mmc@15550000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15550000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC1>,
+				<&cmu_fsys CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mshc_2: mmc@15560000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15560000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC2>,
+				<&cmu_fsys CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		pdma0: dma-controller@15610000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15610000 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma1: dma-controller@15600000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15600000 0x1000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		audio-subsystem@11400000 {
+			compatible = "samsung,exynos5433-lpass";
+			reg = <0x11400000 0x100>, <0x11500000 0x08>;
+			clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
+			clock-names = "sfr0_ctrl";
+			power-domains = <&pd_aud>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			adma: dma-controller@11420000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11420000 0x1000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_aud CLK_ACLK_DMAC>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				power-domains = <&pd_aud>;
+			};
+
+			i2s0: i2s@11440000 {
+				compatible = "samsung,exynos7-i2s";
+				reg = <0x11440000 0x100>;
+				dmas = <&adma 0>, <&adma 2>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+					<&cmu_aud CLK_SCLK_AUD_I2S>,
+					<&cmu_aud CLK_SCLK_I2S_BCLK>;
+				clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+				#clock-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2s0_bus>;
+				power-domains = <&pd_aud>;
+				#sound-dai-cells = <1>;
+				status = "disabled";
+			};
+
+			serial_3: serial@11460000 {
+				compatible = "samsung,exynos5433-uart";
+				reg = <0x11460000 0x100>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+					<&cmu_aud CLK_SCLK_AUD_UART>;
+				clock-names = "uart", "clk_uart_baud0";
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart_aud_bus>;
+				power-domains = <&pd_aud>;
+				status = "disabled";
+			};
+		};
+
+		pcie_phy: pcie-phy@15680000 {
+			compatible = "samsung,exynos5433-pcie-phy";
+			reg = <0x15680000 0x1000>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			samsung,fsys-sysreg = <&syscon_fsys>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie: pcie@15700000 {
+			compatible = "samsung,exynos5433-pcie";
+			reg = <0x15700000 0x1000>, <0x156b0000 0x1000>,
+			      <0x0c000000 0x1000>;
+			reg-names = "dbi", "elbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PCIE>,
+				 <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+			clock-names = "pcie", "pcie_bus";
+			num-lanes = <1>;
+			num-viewport = <3>;
+			bus-range = <0x00 0xff>;
+			phys = <&pcie_phy>;
+			ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
+				 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+			status = "disabled";
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+};
+
+#include "exynos5433-bus.dtsi"
+#include "exynos5433-pinctrl.dtsi"
+#include "exynos5433-tmu.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
new file mode 100644
index 0000000000..1f2eddcebd
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7 Espresso board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos7.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung Exynos7 Espresso board based on Exynos7";
+	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
+
+	aliases {
+		mmc0 = &mmc_0;
+		mmc2 = &mmc_2;
+		serial0 = &serial_2;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0xc0000000>;
+	};
+
+	usb30_vbus_reg: regulator-usb30 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb30_vbus_en>;
+		enable-active-high;
+	};
+
+	usb3drd_boost_5v: regulator-usb3drd-boost {
+		compatible = "regulator-fixed";
+		regulator-name = "VUSB_VBUS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3drd_boost_en>;
+		enable-active-high;
+	};
+
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
+
+&gpu {
+	mali-supply = <&buck6_reg>;
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock_ccore PCLK_RTC>, <&s2mps15_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&hsi2c_4 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps15-pmic";
+		reg = <0x66>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpa0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+		wakeup-source;
+
+		s2mps15_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vqmmc-sdcard";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1110000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <2250000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vmmc-sdcard";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "vdd_ldo18";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_ldo19";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "vdd_ldo21";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "vdd_ldo23";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1470000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_atlas";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_buck7";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_buck8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_buck9";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_buck10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+		};
+	};
+};
+
+&pinctrl_alive {
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	vmmc-supply = <&ldo17_reg>;
+	vqmmc-supply = <&ldo2_reg>;
+	disable-wp;
+};
+
+&pinctrl_bus1 {
+	usb30_vbus_en: usb30-vbus-en-pins {
+		samsung,pins = "gph1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	usb3drd_boost_en: usb3drd-boost-en-pins {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&ufs {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd10-supply = <&ldo4_reg>;
+	vdd33-supply = <&ldo6_reg>;
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb30_vbus_reg>;
+	vbus-boost-supply = <&usb3drd_boost_5v>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
new file mode 100644
index 0000000000..ee9c24a226
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -0,0 +1,702 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos7 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_bus0 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd5: gpd5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus-pins {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus-pins {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl-pins {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus-pins {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpd2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpd2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpd2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpd2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus-pins {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpd5-0", "gpd5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_ff {
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_ese {
+	gpv7: gpv7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpr4: gpr4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpr0: gpr0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_ds: sd0-ds-pins {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_qrdy: sd0-qrdy-pins {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+
+	sd1_ds: sd1-ds-pins {
+		samsung,pins = "gpr2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
+	};
+
+	sd1_qrdy: sd1-qrdy-pins {
+		samsung,pins = "gpr2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
+	};
+
+	sd1_int: sd1-int-pins {
+		samsung,pins = "gpr2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+
+	sd1_bus8: sd1-bus-width8-pins {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+};
+
+&pinctrl_bus1 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv6: gpv6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpg2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
new file mode 100644
index 0000000000..d3301b8bd3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree sources for default Exynos7 thermal zone definition
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+trips {
+	cpu-alert-0 {
+		temperature = <75000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-1 {
+		temperature = <80000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-2 {
+		temperature = <85000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-3 {
+		temperature = <90000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-4 {
+		temperature = <95000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-5 {
+		temperature = <100000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-6 {
+		temperature = <110000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-crit-0 {
+		temperature = <115000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
new file mode 100644
index 0000000000..54ed5167d0
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -0,0 +1,737 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/clock/exynos7-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_bus0;
+		pinctrl2 = &pinctrl_nfc;
+		pinctrl3 = &pinctrl_touch;
+		pinctrl4 = &pinctrl_ff;
+		pinctrl5 = &pinctrl_ese;
+		pinctrl6 = &pinctrl_fsys0;
+		pinctrl7 = &pinctrl_fsys1;
+		pinctrl8 = &pinctrl_bus1;
+		tmuctrl0 = &tmuctrl_0;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>,
+				     <&cpu_atlas2>, <&cpu_atlas3>;
+	};
+
+	fin_pll: clock {
+		/* XXTI */
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu_atlas0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		cpu_atlas1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		cpu_atlas2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		cpu_atlas3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		atlas_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x11001000 0x1000>,
+			      <0x11002000 0x2000>,
+			      <0x11004000 0x2000>,
+			      <0x11006000 0x2000>;
+		};
+
+		pdma0: dma-controller@10e10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10e10000 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma1: dma-controller@10eb0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10eb0000 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		clock_topc: clock-controller@10570000 {
+			compatible = "samsung,exynos7-clock-topc";
+			reg = <0x10570000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_top0: clock-controller@105d0000 {
+			compatible = "samsung,exynos7-clock-top0";
+			reg = <0x105d0000 0xb000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+				 <&clock_topc DOUT_SCLK_CC_PLL>,
+				 <&clock_topc DOUT_SCLK_MFC_PLL>,
+				 <&clock_topc DOUT_SCLK_AUD_PLL>;
+			clock-names = "fin_pll", "dout_sclk_bus0_pll",
+				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+				      "dout_sclk_mfc_pll", "dout_sclk_aud_pll";
+		};
+
+		clock_top1: clock-controller@105e0000 {
+			compatible = "samsung,exynos7-clock-top1";
+			reg = <0x105e0000 0xb000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+				 <&clock_topc DOUT_SCLK_CC_PLL>,
+				 <&clock_topc DOUT_SCLK_MFC_PLL>;
+			clock-names = "fin_pll", "dout_sclk_bus0_pll",
+				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+				      "dout_sclk_mfc_pll";
+		};
+
+		clock_ccore: clock-controller@105b0000 {
+			compatible = "samsung,exynos7-clock-ccore";
+			reg = <0x105b0000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>;
+			clock-names = "fin_pll", "dout_aclk_ccore_133";
+		};
+
+		clock_peric0: clock-controller@13610000 {
+			compatible = "samsung,exynos7-clock-peric0";
+			reg = <0x13610000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>,
+				 <&clock_top0 CLK_SCLK_UART0>;
+			clock-names = "fin_pll", "dout_aclk_peric0_66",
+				      "sclk_uart0";
+		};
+
+		clock_peric1: clock-controller@14c80000 {
+			compatible = "samsung,exynos7-clock-peric1";
+			reg = <0x14c80000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top0 DOUT_ACLK_PERIC1>,
+				 <&clock_top0 CLK_SCLK_UART1>,
+				 <&clock_top0 CLK_SCLK_UART2>,
+				 <&clock_top0 CLK_SCLK_UART3>,
+				 <&clock_top0 CLK_SCLK_SPI0>,
+				 <&clock_top0 CLK_SCLK_SPI1>,
+				 <&clock_top0 CLK_SCLK_SPI2>,
+				 <&clock_top0 CLK_SCLK_SPI3>,
+				 <&clock_top0 CLK_SCLK_SPI4>,
+				 <&clock_top0 CLK_SCLK_I2S1>,
+				 <&clock_top0 CLK_SCLK_PCM1>,
+				 <&clock_top0 CLK_SCLK_SPDIF>;
+			clock-names = "fin_pll",
+				      "dout_aclk_peric1_66",
+				      "sclk_uart1",
+				      "sclk_uart2",
+				      "sclk_uart3",
+				      "sclk_spi0",
+				      "sclk_spi1",
+				      "sclk_spi2",
+				      "sclk_spi3",
+				      "sclk_spi4",
+				      "sclk_i2s1",
+				      "sclk_pcm1",
+				      "sclk_spdif";
+		};
+
+		clock_peris: clock-controller@10040000 {
+			compatible = "samsung,exynos7-clock-peris";
+			reg = <0x10040000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>;
+			clock-names = "fin_pll", "dout_aclk_peris_66";
+		};
+
+		clock_fsys0: clock-controller@10e90000 {
+			compatible = "samsung,exynos7-clock-fsys0";
+			reg = <0x10e90000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>,
+				 <&clock_top1 DOUT_SCLK_MMC2>;
+			clock-names = "fin_pll", "dout_aclk_fsys0_200",
+				      "dout_sclk_mmc2";
+		};
+
+		clock_fsys1: clock-controller@156e0000 {
+			compatible = "samsung,exynos7-clock-fsys1";
+			reg = <0x156e0000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
+				 <&clock_top1 DOUT_SCLK_MMC0>,
+				 <&clock_top1 DOUT_SCLK_MMC1>,
+				 <&clock_top1 DOUT_SCLK_UFSUNIPRO20>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>;
+			clock-names = "fin_pll", "dout_aclk_fsys1_200",
+				      "dout_sclk_mmc0", "dout_sclk_mmc1",
+				      "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1",
+				      "dout_sclk_phy_fsys1_26m";
+		};
+
+		serial_0: serial@13630000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13630000 0x100>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric0 PCLK_UART0>,
+				 <&clock_peric0 SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric1 PCLK_UART1>,
+				 <&clock_peric1 SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric1 PCLK_UART2>,
+				 <&clock_peric1 SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_3: serial@14c40000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c40000 0x100>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric1 PCLK_UART3>,
+				 <&clock_peric1 SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		pinctrl_alive: pinctrl@10580000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10580000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_bus0: pinctrl@13470000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x13470000 0x1000>;
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nfc: pinctrl@14cd0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14cd0000 0x1000>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_touch: pinctrl@14ce0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ce0000 0x1000>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ff: pinctrl@14c90000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14c90000 0x1000>;
+			interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ese: pinctrl@14ca0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ca0000 0x1000>;
+			interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys0: pinctrl@10e60000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10e60000 0x1000>;
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@15690000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x15690000 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_bus1: pinctrl@14870000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14870000 0x1000>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsi2c_0: i2c@13640000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13640000 0x1000>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: i2c@13650000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13650000 0x1000>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@14e60000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e60000 0x1000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@14e70000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e70000 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@13660000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13660000 0x1000>;
+			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@13670000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13670000 0x1000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@14e00000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e00000 0x1000>;
+			interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@13e10000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_8: i2c@14e20000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e20000 0x1000>;
+			interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c8_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C8>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_9: i2c@13680000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13680000 0x1000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c9_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C9>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_10: i2c@13690000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13690000 0x1000>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c10_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C10>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_11: i2c@136a0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x136a0000 0x1000>;
+			interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c11_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C11>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		pmu_system_controller: system-controller@105c0000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x105c0000 0x5000>;
+		};
+
+		rtc: rtc@10590000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10590000 0x100>;
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_ccore PCLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		watchdog: watchdog@101d0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x101d0000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peris PCLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		gpu: gpu@14ac0000 {
+			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			reg = <0x14ac0000 0x5000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			status = "disabled";
+			/* TODO: operating points for DVFS, cooling device */
+		};
+
+		mmc_0: mmc@15740000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15740000 0x2000>;
+			clocks = <&clock_fsys1 ACLK_MMC0>,
+				 <&clock_top1 CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@15750000 {
+			compatible = "samsung,exynos7-dw-mshc";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15750000 0x2000>;
+			clocks = <&clock_fsys1 ACLK_MMC1>,
+				 <&clock_top1 CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@15560000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15560000 0x2000>;
+			clocks = <&clock_fsys0 ACLK_MMC2>,
+				 <&clock_top1 CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		adc: adc@13620000 {
+			compatible = "samsung,exynos7-adc";
+			reg = <0x13620000 0x100>;
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric0 PCLK_ADCIF>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pwm: pwm@136c0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x136c0000 0x100>;
+			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric0 PCLK_PWM>;
+			clock-names = "timers";
+		};
+
+		tmuctrl_0: tmu@10060000 {
+			compatible = "samsung,exynos7-tmu";
+			reg = <0x10060000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peris PCLK_TMU>,
+				 <&clock_peris SCLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+		};
+
+		ufs: ufs@15570000 {
+			compatible = "samsung,exynos7-ufs";
+			reg = <0x15570000 0x100>,  /* 0: HCI standard */
+				<0x15570100 0x100>,  /* 1: Vendor specificed */
+				<0x15571000 0x200>,  /* 2: UNIPRO */
+				<0x15572000 0x300>;  /* 3: UFS protector */
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
+				<&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			phys = <&ufs_phy>;
+			phy-names = "ufs-phy";
+			status = "disabled";
+		};
+
+		ufs_phy: ufs-phy@15571800 {
+			compatible = "samsung,exynos7-ufs-phy";
+			reg = <0x15571800 0x240>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>,
+				 <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>,
+				 <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>,
+				 <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>;
+			clock-names = "ref_clk", "rx1_symbol_clk",
+				      "rx0_symbol_clk",
+				      "tx0_symbol_clk";
+		};
+
+		usbdrd_phy: phy@15500000 {
+			compatible = "samsung,exynos7-usbdrd-phy";
+			reg = <0x15500000 0x100>;
+			clocks = <&clock_fsys0 ACLK_USBDRD300>,
+			       <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
+			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
+			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
+			       <&clock_fsys0 SCLK_USBDRD300_REFCLK>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd: usb@15400000 {
+			compatible = "samsung,exynos7-dwusb3";
+			clocks = <&clock_fsys0 ACLK_USBDRD300>,
+			       <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
+			       <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
+			clock-names = "usbdrd30", "usbdrd30_susp_clk",
+				"usbdrd30_axius_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x15400000 0x10000>;
+
+			usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+	};
+
+	thermal-zones {
+		atlas_thermal: cluster0-thermal {
+			polling-delay-passive = <0>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+			thermal-sensors = <&tmuctrl_0>;
+			#include "exynos7-trip-points.dtsi"
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+#include "exynos7-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
new file mode 100644
index 0000000000..47a389d9ff
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy A8 2018 (jackpotlte/SM-A530F) device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2021 Dávid Virág
+ */
+
+/dts-v1/;
+#include "exynos7885.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A8 (2018)";
+	compatible = "samsung,jackpotlte", "samsung,exynos7885";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc_0;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3da00000>,
+		      <0x0 0xc0000000 0x40000000>,
+		      <0x8 0x80000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_volup &key_voldown &key_power>;
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	mmc-hs400-enhanced-strobe;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	bus-width = <8>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk_fast_slew_rate_3x &sd0_cmd &sd0_rdqs
+		     &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
new file mode 100644
index 0000000000..34bb121919
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7885 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2021 Dávid Virág
+ *
+ * Samsung's Exynos7885 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	etc0: etc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sim1_det_gpio: sim1-det-gpio-pins {
+		samsung,pins = "gpa2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sim0_det_gpio: sim0-det-gpio-pins {
+		samsung,pins = "gpa2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	speedy_bus: speedy-bus-pins {
+		samsung,pins = "gpq0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* UART_DEBUG */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpq0-4", "gpq0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_dispaud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_codec_mclk: aud-codec-mclk-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_mclk_idle: aud-codec-mclk-idle-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_bus: aud-codec-bus-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_bus_idle: aud-codec-bus-idle-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_loopback_bus: aud-loopback-bus-pins {
+		samsung,pins = "gpb1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_loopback_bus_idle: aud-loopback-bus-idle-pins {
+		samsung,pins = "gpb1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_bus: aud-fm-bus-pins {
+		samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_bus_idle: aud-fm-bus-idle-pins {
+		samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_spk_bus: aud-spk-bus-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_spk_bus_idle: aud-spk-bus-idle-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_fsys {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+	};
+
+	sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_rdqs: sd0-rdqs-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_clk_fast_slew_rate_1x: sd1-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd1_clk_fast_slew_rate_2x: sd1-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+	};
+
+	sd1_clk_fast_slew_rate_3x: sd1-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_clk_fast_slew_rate_4x: sd1-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpf3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpf3-3", "gpf3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpf4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpf4-3", "gpf4-4", "gpf4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+};
+
+&pinctrl_top {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpc1-5", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpc1-7", "gpc1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI0 UART */
+	uart3_bus_single: uart3-bus-single-pins {
+		samsung,pins = "gpc2-3", "gpc2-2", "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI0 UART_HSI2C1 */
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI0 HSI2C0 */
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI0 HSI2C1 */
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI0 SPI */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0", "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI1 UART */
+	uart4_bus_single: uart4-bus-single-pins {
+		samsung,pins = "gpc2-7", "gpc2-6", "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI1 UART_HSI2C1*/
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI1 HSI2C0 */
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI1 HSI2C1 */
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpc2-7", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI1 SPI */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpc2-5", "gpc2-4", "gpc2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	fm_lna_en: fm-lna-en-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-val = <1>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpg1-3", "gpg1-2", "gpg1-1", "gpg1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpg1-5", "gpg1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	aud_dmic_on: aud-dmic-on-pins {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-val = <1>;
+	};
+
+	aud_dmic_off: aud-dmic-off-pins {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-val = <0>;
+	};
+
+	/* UART_HEALTH */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-3", "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpp1-3", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpp4-3", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpp4-5", "gpp4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* SPI_ESE */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp5-3", "gpp5-2", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* SPI_FP */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp6-3", "gpp6-2", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI2 UART */
+	uart5_bus_single: uart5-bus-single-pins {
+		samsung,pins = "gpp8-1", "gpp8-0", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	  };
+
+	/* USI2 UART_HSI2C1 */
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI2 HSI2C0 */
+	hs_i2c8_bus: hs-i2c8-bus-pins {
+		samsung,pins = "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI2 HSI2C1 */
+	hs_i2c9_bus: hs-i2c9-bus-pins {
+		samsung,pins = "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI2 SPI */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp7-1", "gpp7-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
new file mode 100644
index 0000000000..d69fc2392b
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7885 SoC device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2021 Dávid Virág
+ */
+
+#include <dt-bindings/clock/exynos7885.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos7885";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_dispaud;
+		pinctrl2 = &pinctrl_fsys;
+		pinctrl3 = &pinctrl_top;
+	};
+
+	arm-a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>,
+				     <&cpu5>;
+	};
+
+	arm-a73-pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu6>,
+				     <&cpu7>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+				core4 {
+					cpu = <&cpu4>;
+				};
+				core5 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x201>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	fixed-rate-clocks {
+		oscclk: osc-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "oscclk";
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@12301000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x12301000 0x1000>,
+			      <0x12302000 0x2000>,
+			      <0x12304000 0x2000>,
+			      <0x12306000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cmu_peri: clock-controller@10010000 {
+			compatible = "samsung,exynos7885-cmu-peri";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_PERI_BUS>,
+				 <&cmu_top CLK_DOUT_PERI_SPI0>,
+				 <&cmu_top CLK_DOUT_PERI_SPI1>,
+				 <&cmu_top CLK_DOUT_PERI_UART0>,
+				 <&cmu_top CLK_DOUT_PERI_UART1>,
+				 <&cmu_top CLK_DOUT_PERI_UART2>,
+				 <&cmu_top CLK_DOUT_PERI_USI0>,
+				 <&cmu_top CLK_DOUT_PERI_USI1>,
+				 <&cmu_top CLK_DOUT_PERI_USI2>;
+			clock-names = "oscclk",
+				      "dout_peri_bus",
+				      "dout_peri_spi0",
+				      "dout_peri_spi1",
+				      "dout_peri_uart0",
+				      "dout_peri_uart1",
+				      "dout_peri_uart2",
+				      "dout_peri_usi0",
+				      "dout_peri_usi1",
+				      "dout_peri_usi2";
+		};
+
+		cmu_core: clock-controller@12000000 {
+			compatible = "samsung,exynos7885-cmu-core";
+			reg = <0x12000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CORE_BUS>,
+				 <&cmu_top CLK_DOUT_CORE_CCI>,
+				 <&cmu_top CLK_DOUT_CORE_G3D>;
+			clock-names = "oscclk",
+				      "dout_core_bus",
+				      "dout_core_cci",
+				      "dout_core_g3d";
+		};
+
+		cmu_top: clock-controller@12060000 {
+			compatible = "samsung,exynos7885-cmu-top";
+			reg = <0x12060000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+
+		cmu_fsys: clock-controller@13400000 {
+			compatible = "samsung,exynos7885-cmu-fsys";
+			reg = <0x13400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_FSYS_BUS>,
+				 <&cmu_top CLK_DOUT_FSYS_MMC_CARD>,
+				 <&cmu_top CLK_DOUT_FSYS_MMC_EMBD>,
+				 <&cmu_top CLK_DOUT_FSYS_MMC_SDIO>,
+				 <&cmu_top CLK_DOUT_FSYS_USB30DRD>;
+			clock-names = "oscclk",
+				      "dout_fsys_bus",
+				      "dout_fsys_mmc_card",
+				      "dout_fsys_mmc_embd",
+				      "dout_fsys_mmc_sdio",
+				      "dout_fsys_usb30drd";
+		};
+
+		pinctrl_alive: pinctrl@11cb0000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x11cb0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_fsys: pinctrl@13430000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x13430000 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_top: pinctrl@139b0000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_dispaud: pinctrl@148f0000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x148f0000 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@11c80000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x11c80000 0x10000>;
+		};
+
+		mmc_0: mmc@13500000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			reg = <0x13500000 0x2000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_fsys CLK_GOUT_MMC_EMBD_ACLK>,
+				 <&cmu_fsys CLK_GOUT_MMC_EMBD_SDCLKIN>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			clocks = <&cmu_peri CLK_GOUT_UART0_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <64>;
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			clocks = <&cmu_peri CLK_GOUT_UART1_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+			clocks = <&cmu_peri CLK_GOUT_UART2_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13830000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13840000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13850000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13860000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_4: i2c@13870000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_5: i2c@13880000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_6: i2c@13890000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_7: i2c@11cd0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x11cd0000 0x100>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C7_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynos7885-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
new file mode 100644
index 0000000000..6ed3891250
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * WinLink E850-96 board device tree source
+ *
+ * Copyright (C) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Device tree source file for WinLink's E850-96 board which is based on
+ * Samsung Exynos850 SoC.
+ */
+
+/dts-v1/;
+
+#include "exynos850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "WinLink E850-96 board";
+	compatible = "winlink,e850-96", "samsung,exynos850";
+
+	aliases {
+		mmc0 = &mmc_0;
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	/*
+	 * RAM: 4 GiB (eMCP):
+	 *   - 2 GiB at 0x80000000
+	 *   - 2 GiB at 0x880000000
+	 *
+	 * 0xbab00000..0xbfffffff: secure memory (85 MiB).
+	 */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3ab00000>,
+		      <0x0 0xc0000000 0x40000000>,
+		      <0x8 0x80000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_voldown_pins &key_volup_pins>;
+
+		volume-down-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		volume-up-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* HEART_BEAT_LED */
+		user_led1: led-1 {
+			label = "yellow:user1";
+			gpios = <&gpg2 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+		};
+
+		/* eMMC_LED */
+		user_led2: led-2 {
+			label = "yellow:user2";
+			gpios = <&gpg2 3 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		/* SD_LED */
+		user_led3: led-3 {
+			label = "white:user3";
+			gpios = <&gpg2 4 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_SD;
+			linux,default-trigger = "mmc2";
+		};
+
+		/* WIFI_LED */
+		wlan_active_led: led-4 {
+			label = "yellow:wlan";
+			gpios = <&gpg2 6 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_WLAN;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		/* BLUETOOTH_LED */
+		bt_active_led: led-5 {
+			label = "blue:bt";
+			gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_BLUETOOTH;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	/*
+	 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
+	 *
+	 * TODO: Remove this once RTC clock is implemented properly as part of
+	 *       PMIC driver.
+	 */
+	rtcclk: clock-rtcclk {
+		compatible = "fixed-clock";
+		clock-output-names = "rtcclk";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&cmu_hsi {
+	clocks = <&oscclk>, <&rtcclk>,
+		 <&cmu_top CLK_DOUT_HSI_BUS>,
+		 <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
+		 <&cmu_top CLK_DOUT_HSI_USB20DRD>;
+	clock-names = "oscclk", "rtcclk", "dout_hsi_bus",
+		      "dout_hsi_mmc_card", "dout_hsi_usb20drd";
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	mmc-hs400-enhanced-strobe;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	bus-width = <8>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk_pins &sd0_cmd_pins &sd0_rdqs_pins &sd0_nreset_pins
+		     &sd0_bus1_pins &sd0_bus4_pins &sd0_bus8_pins>;
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_voldown_pins: key-voldown-pins {
+		samsung,pins = "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup_pins: key-volup-pins {
+		samsung,pins = "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>, <&rtcclk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&serial_0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	status = "okay";
+};
+
+&watchdog_cl1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
new file mode 100644
index 0000000000..424bc80bde
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
@@ -0,0 +1,663 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (C) 2017 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* I2C5 (also called CAM_PMIC_I2C in TRM) */
+	i2c5_pins: i2c5-pins {
+		samsung,pins = "gpa3-5", "gpa3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* I2C6 (also called MOTOR_I2C in TRM) */
+	i2c6_pins: i2c6-pins {
+		samsung,pins = "gpa3-7", "gpa4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: UART_DEBUG_0 pins */
+	uart0_pins: uart0-pins {
+		samsung,pins = "gpq0-0", "gpq0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI: UART_DEBUG_1 pins */
+	uart1_pins: uart1-pins {
+		samsung,pins = "gpa3-7", "gpa4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	/* USI_CMGP0: HSI2C function */
+	hsi2c3_pins: hsi2c3-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_CMGP0: UART function (4 pins, Auto Flow Control) */
+	uart1_single_pins: uart1-single-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */
+	uart1_dual_pins: uart1-dual-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP0: SPI function */
+	spi1_pins: spi1-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_CMGP1: HSI2C function */
+	hsi2c4_pins: hsi2c4-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_CMGP1: UART function (4 pins, Auto Flow Control) */
+	uart2_single_pins: uart2-single-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */
+	uart2_dual_pins: uart2-dual-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP1: SPI function */
+	spi2_pins: spi2-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_codec_mclk_pins: aud-codec-mclk-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_pins: aud-i2s0-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_idle_pins: aud-i2s0-idle-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_pins: aud-i2s1-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_idle_pins: aud-i2s1-idle-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_pins: aud-fm-pins {
+		samsung,pins = "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_idle_pins: aud-fm-idle-pins {
+		samsung,pins = "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_hsi {
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk_pins: sd2-clk-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_cmd_pins: sd2-cmd-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	 };
+
+	sd2_bus1_pins: sd2-bus1-pins {
+		samsung,pins = "gpf2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_bus4_pins: sd2-bus4-pins {
+		samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_pdn_pins: sd2-pdn-pins {
+		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+			       "gpf2-4", "gpf2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_core {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk_pins: sd0-clk-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd_pins: sd0-cmd-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_rdqs_pins: sd0-rdqs-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_nreset_pins: sd0-nreset-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1_pins: sd0-bus1-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4_pins: sd0-bus4-pins {
+		samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8_pins: sd0-bus8-pins {
+		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_peri {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sensor_mclk0_in_pins: sensor-mclk0-in-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk0_out_pins: sensor-mclk0-out-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk0_fn_pins: sensor-mclk0-fn-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk1_in_pins: sensor-mclk1-in-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk1_out_pins: sensor-mclk1-out-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk1_fn_pins: sensor-mclk1-fn-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk2_in_pins: sensor-mclk2-in-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk2_out_pins: sensor-mclk2-out-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk2_fn_pins: sensor-mclk2-fn-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	/* USI: HSI2C0 */
+	hsi2c0_pins: hsi2c0-pins {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: HSI2C1 */
+	hsi2c1_pins: hsi2c1-pins {
+		samsung,pins = "gpc1-2", "gpc1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: HSI2C2 */
+	hsi2c2_pins: hsi2c2-pins {
+		samsung,pins = "gpc1-4", "gpc1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: SPI */
+	spi0_pins: spi0-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c0_pins: i2c0-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	xclkout_pins: xclkout-pins {
+		samsung,pins = "gpq0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
new file mode 100644
index 0000000000..aa077008b3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos850 SoC device tree source
+ *
+ * Copyright (C) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung Exynos850 SoC device nodes are listed in this file.
+ * Exynos850 based board files can include this file and provide
+ * values for board specific bindings.
+ */
+
+#include <dt-bindings/clock/exynos850.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	/* Also known under engineering name Exynos3830 */
+	compatible = "samsung,exynos850";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_cmgp;
+		pinctrl2 = &pinctrl_aud;
+		pinctrl3 = &pinctrl_hsi;
+		pinctrl4 = &pinctrl_core;
+		pinctrl5 = &pinctrl_peri;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+				     <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	/* Main system clock (XTCXO); external, must be 26 MHz */
+	oscclk: clock-oscclk {
+		compatible = "fixed-clock";
+		clock-output-names = "oscclk";
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts =
+		     <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+		     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+		     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+		     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos850-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		timer@10040000 {
+			compatible = "samsung,exynos850-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk>, <&cmu_peri CLK_GOUT_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		gic: interrupt-controller@12a01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			reg = <0x12a01000 0x1000>,
+			      <0x12a02000 0x2000>,
+			      <0x12a04000 0x2000>,
+			      <0x12a06000 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynos850-pmu", "syscon";
+			reg = <0x11860000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+				mask = <0x2>; /* SWRESET_SYSTEM */
+				value = <0x2>; /* reset value */
+			};
+		};
+
+		watchdog_cl0: watchdog@10050000 {
+			compatible = "samsung,exynos850-wdt";
+			reg = <0x10050000 0x100>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peri CLK_GOUT_WDT0_PCLK>, <&oscclk>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10060000 {
+			compatible = "samsung,exynos850-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peri CLK_GOUT_WDT1_PCLK>, <&oscclk>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		cmu_peri: clock-controller@10030000 {
+			compatible = "samsung,exynos850-cmu-peri";
+			reg = <0x10030000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
+				 <&cmu_top CLK_DOUT_PERI_UART>,
+				 <&cmu_top CLK_DOUT_PERI_IP>;
+			clock-names = "oscclk", "dout_peri_bus",
+				      "dout_peri_uart", "dout_peri_ip";
+		};
+
+		cmu_g3d: clock-controller@11400000 {
+			compatible = "samsung,exynos850-cmu-g3d";
+			reg = <0x11400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_G3D_SWITCH>;
+			clock-names = "oscclk", "dout_g3d_switch";
+		};
+
+		cmu_apm: clock-controller@11800000 {
+			compatible = "samsung,exynos850-cmu-apm";
+			reg = <0x11800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CLKCMU_APM_BUS>;
+			clock-names = "oscclk", "dout_clkcmu_apm_bus";
+		};
+
+		cmu_cmgp: clock-controller@11c00000 {
+			compatible = "samsung,exynos850-cmu-cmgp";
+			reg = <0x11c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_apm CLK_GOUT_CLKCMU_CMGP_BUS>;
+			clock-names = "oscclk", "gout_clkcmu_cmgp_bus";
+		};
+
+		cmu_core: clock-controller@12000000 {
+			compatible = "samsung,exynos850-cmu-core";
+			reg = <0x12000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CORE_BUS>,
+				 <&cmu_top CLK_DOUT_CORE_CCI>,
+				 <&cmu_top CLK_DOUT_CORE_MMC_EMBD>,
+				 <&cmu_top CLK_DOUT_CORE_SSS>;
+			clock-names = "oscclk", "dout_core_bus",
+				      "dout_core_cci", "dout_core_mmc_embd",
+				      "dout_core_sss";
+		};
+
+		cmu_top: clock-controller@120e0000 {
+			compatible = "samsung,exynos850-cmu-top";
+			reg = <0x120e0000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+
+		cmu_mfcmscl: clock-controller@12c00000 {
+			compatible = "samsung,exynos850-cmu-mfcmscl";
+			reg = <0x12c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_MFC>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_M2M>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_MCSC>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_JPEG>;
+			clock-names = "oscclk", "dout_mfcmscl_mfc",
+				      "dout_mfcmscl_m2m", "dout_mfcmscl_mcsc",
+				      "dout_mfcmscl_jpeg";
+		};
+
+		cmu_dpu: clock-controller@13000000 {
+			compatible = "samsung,exynos850-cmu-dpu";
+			reg = <0x13000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_DPU>;
+			clock-names = "oscclk", "dout_dpu";
+		};
+
+		cmu_hsi: clock-controller@13400000 {
+			compatible = "samsung,exynos850-cmu-hsi";
+			reg = <0x13400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_HSI_BUS>,
+				 <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
+				 <&cmu_top CLK_DOUT_HSI_USB20DRD>;
+			clock-names = "oscclk", "dout_hsi_bus",
+				      "dout_hsi_mmc_card", "dout_hsi_usb20drd";
+		};
+
+		cmu_is: clock-controller@14500000 {
+			compatible = "samsung,exynos850-cmu-is";
+			reg = <0x14500000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_IS_BUS>,
+				 <&cmu_top CLK_DOUT_IS_ITP>,
+				 <&cmu_top CLK_DOUT_IS_VRA>,
+				 <&cmu_top CLK_DOUT_IS_GDC>;
+			clock-names = "oscclk", "dout_is_bus", "dout_is_itp",
+				      "dout_is_vra", "dout_is_gdc";
+		};
+
+		cmu_aud: clock-controller@14a00000 {
+			compatible = "samsung,exynos850-cmu-aud";
+			reg = <0x14a00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_AUD>;
+			clock-names = "oscclk", "dout_aud";
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x11850000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos850-wakeup-eint";
+			};
+		};
+
+		pinctrl_cmgp: pinctrl@11c30000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x11c30000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos850-wakeup-eint";
+			};
+		};
+
+		pinctrl_core: pinctrl@12070000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x12070000 0x1000>;
+			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi: pinctrl@13430000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x13430000 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peri: pinctrl@139b0000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aud: pinctrl@14a60000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x14a60000 0x1000>;
+		};
+
+		rtc: rtc@11a30000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x11a30000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		mmc_0: mmc@12100000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			reg = <0x12100000 0x2000>;
+			interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_core CLK_GOUT_MMC_EMBD_ACLK>,
+				 <&cmu_core CLK_GOUT_MMC_EMBD_SDCLKIN>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13830000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13840000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13850000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13860000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_4: i2c@13870000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
+		i2c_5: i2c@13880000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		/* I2C_6 (also called MOTOR_I2C in TRM) */
+		i2c_6: i2c@13890000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		sysmmu_mfcmscl: sysmmu@12c50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12c50000 0x9000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_mfcmscl CLK_GOUT_MFCMSCL_SYSMMU_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_dpu: sysmmu@130c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x130c0000 0x9000>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_dpu CLK_GOUT_DPU_SMMU_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_is0: sysmmu@14550000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14550000 0x9000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS0_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_is1: sysmmu@14570000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14570000 0x9000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS1_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_aud: sysmmu@14850000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14850000 0x9000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_aud CLK_GOUT_AUD_SYSMMU_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysreg_peri: syscon@10020000 {
+			compatible = "samsung,exynos850-peri-sysreg",
+				     "samsung,exynos850-sysreg", "syscon";
+			reg = <0x10020000 0x10000>;
+			clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>;
+		};
+
+		sysreg_cmgp: syscon@11c20000 {
+			compatible = "samsung,exynos850-cmgp-sysreg",
+				     "samsung,exynos850-sysreg", "syscon";
+			reg = <0x11c20000 0x10000>;
+			clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>;
+		};
+
+		usi_uart: usi@138200c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138200c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@13820000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x13820000 0xc0>;
+				interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
+					 <&cmu_peri CLK_GOUT_UART_IPCLK>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+
+		usi_hsi2c_0: usi@138a00c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138a00c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1020>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_HSI2C0_PCLK>,
+				 <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_0: i2c@138a0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x138a0000 0xc0>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c0_pins>;
+				clocks = <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>,
+					 <&cmu_peri CLK_GOUT_HSI2C0_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
+		usi_hsi2c_1: usi@138b00c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138b00c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1030>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_HSI2C1_PCLK>,
+				 <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_1: i2c@138b0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x138b0000 0xc0>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c1_pins>;
+				clocks = <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>,
+					 <&cmu_peri CLK_GOUT_HSI2C1_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
+		usi_hsi2c_2: usi@138c00c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138c00c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1040>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_HSI2C2_PCLK>,
+				 <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_2: i2c@138c0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x138c0000 0xc0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c2_pins>;
+				clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+					 <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
+		usi_spi_0: usi@139400c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x139400c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1050>;
+			samsung,mode = <USI_V2_SPI>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
+				 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+		};
+
+		usi_cmgp0: usi@11d000c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x11d000c0 0x20>;
+			samsung,sysreg = <&sysreg_cmgp 0x2000>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+				 <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_3: i2c@11d00000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x11d00000 0xc0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c3_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_1: serial@11d00000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x11d00000 0xc0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_single_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp1: usi@11d200c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x11d200c0 0x20>;
+			samsung,sysreg = <&sysreg_cmgp 0x2010>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+				 <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_4: i2c@11d20000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x11d20000 0xc0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c4_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_2: serial@11d20000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x11d20000 0xc0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_single_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "exynos850-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
new file mode 100644
index 0000000000..e413a51c2d
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
@@ -0,0 +1,1189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov9 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov9 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dp0_hpd: dp0-hpd-pins {
+		samsung,pins = "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	dp1_hpd: dp1-hpd-pins {
+		samsung,pins = "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	speedy0_bus: speedy0-bus-pins {
+		samsung,pins = "gpq0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	speedy1_bus: speedy1-bus-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_codec_mclk: aud-codec-mclk-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_mclk_idle: aud-codec-mclk-idle-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_bus: aud-i2s0-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_idle: aud-i2s0-idle-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_bus: aud-i2s1-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_idle: aud-i2s1-idle-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s2_bus: aud-i2s2-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s2_idle: aud-i2s2-idle-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s3_bus: aud-i2s3-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s3_idle: aud-i2s3-idle-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s4_bus: aud-i2s4-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s4_idle: aud-i2s4-idle-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s5_bus: aud-i2s5-pins {
+		samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s5_idle: aaud-i2s5-idle-pins {
+		samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s6_bus: aud-i2s6-pins {
+		samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s6_idle: aaud-i2s6-idle-pins {
+		samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie_clkreq0: pcie-clkreq0-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst0_out: pcie-perst0-out-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst0_in: pcie-perst0-in-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq1: pcie-clkreq1-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst1_out: pcie-perst1-out-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst1_in: pcie-perst1-in-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq2: pcie-clkreq2-pins {
+		samsung,pins = "gpf0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst2_out: pcie-perst2-out-pins {
+		samsung,pins = "gpf0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst2_in: pcie-perst2-in-pins {
+		samsung,pins = "gpf0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq3: pcie-clkreq3-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst3_out: pcie-perst3-out-pins {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst3_in: pcie-perst3-in-pins {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq4: pcie-clkreq4-pins {
+		samsung,pins = "gpf1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst4_out: pcie-perst4-out-pins {
+		samsung,pins = "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst4_in: pcie-perst4-in-pins {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq5: pcie-clkreq5-pins {
+		samsung,pins = "gpf1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst5_out: pcie-perst5-out-pins {
+		samsung,pins = "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst5_in: pcie-perst5-in-pins {
+		samsung,pins = "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpf8: gpf8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpf8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpf8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpf8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpf8-3", "gpf8-4", "gpf8-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+};
+
+&pinctrl_fsys2 {
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf6: gpf6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_rst_n_1: ufs-rst-n-1-pins {
+		samsung,pins = "gpf2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out_1: ufs-refclk-out-1-pins {
+		samsung,pins = "gpf2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	eth0_mdc_mdio: eth0-mdc-mdio-pins {
+		samsung,pins = "gpf4-5", "gpf4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth0_rgmii: eth0-rgmii-pins {
+		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4",
+			       "gpf3-5", "gpf3-6", "gpf3-7", "gpf4-0",
+			       "gpf4-1", "gpf4-2", "gpf4-3", "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth0_pps_out: eth0-pps-out-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	eth1_mdc_mdio: eth1-mdc-mdio-pins {
+		samsung,pins = "gpf6-5", "gpf6-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth1_rgmii: eth1-rgmii-pins {
+		samsung,pins = "gpf5-1", "gpf5-2", "gpf5-3", "gpf5-4",
+			       "gpf5-5", "gpf5-6", "gpf5-7", "gpf6-0",
+			       "gpf6-1", "gpf6-2", "gpf6-3", "gpf6-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth1_pps_out: eth1-pps-out-pins {
+		samsung,pins = "gpf5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2: pwm-tout2-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3: pwm-tout3-pins {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI00  */
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI00_I2C */
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI01 */
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI01_I2C */
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI02 */
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI02_I2C */
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI03 */
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI03_I2C */
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI04 */
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI04_I2C */
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI05 */
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI05_I2C */
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI USI_PERIC0_USI00_SPI */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI01_SPI */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-5", "gpp0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI02_SPI */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI03_SPI */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-5", "gpp1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI04_SPI */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI05_SPI */
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-5", "gpp2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI00_UART */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_bus_dual: uart0-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI01_UART */
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_dual: uart1-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI02_UART */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI03_UART */
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI04_UART */
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI05_UART */
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* PERIC1 USI06 */
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI06_I2C */
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI07 */
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI07_I2C */
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI08 */
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI08_I2C */
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI09 */
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp4-4", "gpp4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI09_I2C */
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp4-6", "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI10 */
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI10_I2C */
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI11 */
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI11_I2C */
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI06_SPI */
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI07_SPI */
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI08_SPI */
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI09_SPI */
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp4-6", "gpp4-5", "gpp4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI10_SPI */
+	spi10_bus: spi10-pins {
+		samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI11_SPI */
+	spi11_bus: spi11-pins {
+		samsung,pins = "gpp5-6", "gpp5-5", "gpp5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_PERIC1_USI06_UART */
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpp3-3", "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI07_UART */
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpp3-7", "gpp3-6", "gpp3-5", "gpp3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI08_UART */
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpp4-3", "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI09_UART */
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpp4-7", "gpp4-6", "gpp4-5", "gpp4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp4-4", "gpp4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI10_UART */
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpp5-3", "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI11_UART */
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpp5-7", "gpp5-6", "gpp5-5", "gpp5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
new file mode 100644
index 0000000000..bc1815f6ad
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung ExynosAutov9 SADK board device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov9.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung ExynosAuto v9 SADK board";
+	compatible = "samsung,exynosautov9-sadk", "samsung,exynosautov9";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x77000000>,
+		      <0x8 0x80000000 0x1 0x7ba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+
+	ufs_0_fixed_vcc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpq0 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	ufs_1_fixed_vcc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpg2 2 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout3>;
+	status = "okay";
+};
+
+&serial_0 {
+	pinctrl-0 = <&uart0_bus_dual>;
+	status = "okay";
+};
+
+&ufs_0_phy {
+	status = "okay";
+};
+
+&ufs_1_phy {
+	status = "okay";
+};
+
+&ufs_0 {
+	status = "okay";
+	vcc-supply = <&ufs_0_fixed_vcc_reg>;
+};
+
+&ufs_1 {
+	status = "okay";
+	vcc-supply = <&ufs_1_fixed_vcc_reg>;
+};
+
+&usi_0 {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <26000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
new file mode 100644
index 0000000000..b228cd7e35
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -0,0 +1,1577 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAuto v9 SoC device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/clock/samsung,exynosautov9.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,boot-mode.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynosautov9";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_fsys0;
+		pinctrl3 = &pinctrl_fsys1;
+		pinctrl4 = &pinctrl_fsys2;
+		pinctrl5 = &pinctrl_peric0;
+		pinctrl6 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+				     <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10100>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10200>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10300>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	fixed-rate-clocks {
+		xtcxo: clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "oscclk";
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		cmu_peris: clock-controller@10020000 {
+			compatible = "samsung,exynosautov9-cmu-peris";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIS_BUS>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_peris_bus";
+		};
+
+		cmu_peric0: clock-controller@10200000 {
+			compatible = "samsung,exynosautov9-cmu-peric0";
+			reg = <0x10200000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_BUS>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_peric0_bus",
+				      "dout_clkcmu_peric0_ip";
+		};
+
+		cmu_peric1: clock-controller@10800000 {
+			compatible = "samsung,exynosautov9-cmu-peric1";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_BUS>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_IP>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_peric1_bus",
+				      "dout_clkcmu_peric1_ip";
+		};
+
+		cmu_fsys1: clock-controller@17040000 {
+			compatible = "samsung,exynosautov9-cmu-fsys1";
+			reg = <0x17040000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_FSYS1_BUS>,
+				 <&cmu_top GOUT_CLKCMU_FSYS1_MMC_CARD>,
+				 <&cmu_top DOUT_CLKCMU_FSYS1_USBDRD>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_fsys1_bus",
+				      "gout_clkcmu_fsys1_mmc_card",
+				      "dout_clkcmu_fsys1_usbdrd";
+		};
+
+		cmu_fsys0: clock-controller@17700000 {
+			compatible = "samsung,exynosautov9-cmu-fsys0";
+			reg = <0x17700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_FSYS0_BUS>,
+				 <&cmu_top DOUT_CLKCMU_FSYS0_PCIE>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_fsys0_bus",
+				      "dout_clkcmu_fsys0_pcie";
+		};
+
+		cmu_fsys2: clock-controller@17c00000 {
+			compatible = "samsung,exynosautov9-cmu-fsys2";
+			reg = <0x17c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+				 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+				 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_fsys2_bus",
+				      "dout_fsys2_clkcmu_ufs_embd",
+				      "dout_fsys2_clkcmu_ethernet";
+		};
+
+		cmu_core: clock-controller@1b030000 {
+			compatible = "samsung,exynosautov9-cmu-core";
+			reg = <0x1b030000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CORE_BUS>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_core_bus";
+		};
+
+		cmu_busmc: clock-controller@1b200000 {
+			compatible = "samsung,exynosautov9-cmu-busmc";
+			reg = <0x1b200000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_BUSMC_BUS>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_busmc_bus";
+		};
+
+		cmu_top: clock-controller@1b240000 {
+			compatible = "samsung,exynosautov9-cmu-top";
+			reg = <0x1b240000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>;
+			clock-names = "oscclk";
+		};
+
+		gic: interrupt-controller@10101000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10101000 0x1000>,
+			      <0x10102000 0x2000>,
+			      <0x10104000 0x2000>,
+			      <0x10106000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pdma0: dma-controller@1b2e0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x1b2e0000 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_busmc CLK_GOUT_BUSMC_PDMA0_PCLK>;
+			clock-names = "apb_pclk";
+			arm,pl330-broken-no-flushp;
+			#dma-cells = <1>;
+		};
+
+		pinctrl_alive: pinctrl@10450000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x10450000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynosautov9-wakeup-eint";
+			};
+		};
+
+		pinctrl_aud: pinctrl@19c60000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x19c60000 0x1000>;
+		};
+
+		pinctrl_fsys0: pinctrl@17740000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x17740000 0x1000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@17060000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x17060000 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys2: pinctrl@17c30000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x17c30000 0x1000>;
+			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric0: pinctrl@10230000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x10230000 0x1000>;
+			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric1: pinctrl@10830000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x10830000 0x1000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@10460000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x10460000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+				value = <0x2>;
+				mask = <0x2>;
+			};
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x810>; /* SYSIP_DAT0 */
+				mode-bootloader = <EXYNOSAUTOV9_BOOT_BOOTLOADER>;
+				mode-fastboot = <EXYNOSAUTOV9_BOOT_FASTBOOT>;
+				mode-recovery = <EXYNOSAUTOV9_BOOT_RECOVERY>;
+			};
+		};
+
+		syscon_fsys2: syscon@17c20000 {
+			compatible = "samsung,exynosautov9-fsys2-sysreg",
+				     "samsung,exynosautov9-sysreg", "syscon";
+			reg = <0x17c20000 0x1000>;
+		};
+
+		syscon_peric0: syscon@10220000 {
+			compatible = "samsung,exynosautov9-peric0-sysreg",
+				     "samsung,exynosautov9-sysreg", "syscon";
+			reg = <0x10220000 0x2000>;
+		};
+
+		syscon_peric1: syscon@10820000 {
+			compatible = "samsung,exynosautov9-peric1-sysreg",
+				     "samsung,exynosautov9-sysreg", "syscon";
+			reg = <0x10820000 0x2000>;
+		};
+
+		usi_0: usi@103000c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103000c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10300000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10300000 0xc0>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_0: spi@10300000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10300000 0x30>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_bus &spi0_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 1>, <&pdma0 0>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_0: i2c@10300000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10300000 0xc0>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c0_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_0: usi@103100c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103100c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1004>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_1: i2c@10310000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10310000 0xc0>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c1_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_1: usi@103200c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103200c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_1: serial@10320000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10320000 0xc0>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_1: spi@10320000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10320000 0x30>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_bus &spi1_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 3>, <&pdma0 2>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_2: i2c@10320000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10320000 0xc0>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c2_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_1: usi@103300c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103300c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x100c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_3: i2c@10330000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10330000 0xc0>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c3_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_2: usi@103400c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103400c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_2: serial@10340000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10340000 0xc0>;
+				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@10340000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10340000 0x30>;
+				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_bus &spi2_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 5>, <&pdma0 4>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_4: i2c@10340000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10340000 0xc0>;
+				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c4_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_2: usi@103500c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103500c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1014>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_5: i2c@10350000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10350000 0xc0>;
+				interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c5_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_3: usi@103600c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103600c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_3: serial@10360000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10360000 0xc0>;
+				interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart3_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@10360000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10360000 0x30>;
+				interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_bus &spi3_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 7>, <&pdma0 6>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_6: i2c@10360000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10360000 0xc0>;
+				interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c6_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_3: usi@103700c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103700c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x101c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_7: i2c@10370000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10370000 0xc0>;
+				interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c7_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_4: usi@103800c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_4: serial@10380000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10380000 0xc0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart4_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@10380000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10380000 0x30>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi4_bus &spi4_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 9>, <&pdma0 8>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_8: i2c@10380000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10380000 0xc0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c8_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_4: usi@103900c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103900c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_9: i2c@10390000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10390000 0xc0>;
+				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c9_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_5: usi@103a00c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103a00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_5: serial@103a0000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x103a0000 0xc0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart5_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@103a0000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x103a0000 0x30>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi5_bus &spi5_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 11>, <&pdma0 10>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_10: i2c@103a0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x103a0000 0xc0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c10_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_5: usi@103b00c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103b00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x102c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_11: i2c@103b0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x103b0000 0xc0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c11_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_6: usi@109000c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_6: serial@10900000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart6_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_6: spi@10900000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10900000 0x30>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi6_bus &spi6_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI06_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 13>, <&pdma0 12>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_12: i2c@10900000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c12_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_6: usi@109100c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1004>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_13: i2c@10910000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c13_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_7: usi@109200c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_7: serial@10920000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart7_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@10920000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10920000 0x30>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi7_bus &spi7_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI07_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 15>, <&pdma0 14>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_14: i2c@10920000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c14_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_7: usi@109300c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x100c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_15: i2c@10930000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c15_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_8: usi@109400c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_8: serial@10940000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart8_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@10940000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10940000 0x30>;
+				interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi8_bus &spi8_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI08_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 17>, <&pdma0 16>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_16: i2c@10940000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c16_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_8: usi@109500c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1014>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_17: i2c@10950000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c17_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_9: usi@109600c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_9: serial@10960000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart9_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_9: spi@10960000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10960000 0x30>;
+				interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi9_bus &spi9_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 19>, <&pdma0 18>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_18: i2c@10960000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c18_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_9: usi@109700c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x101c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_19: i2c@10970000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c19_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_10: usi@109800c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_10: serial@10980000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10980000 0xc0>;
+				interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart10_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@10980000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10980000 0x30>;
+				interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi10_bus &spi10_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 21>, <&pdma0 20>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_20: i2c@10980000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10980000 0xc0>;
+				interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c20_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_10: usi@109900c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109900c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1024>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_21: i2c@10990000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10990000 0xc0>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c21_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_11: usi@109a00c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109a00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_11: serial@109a0000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x109a0000 0xc0>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart11_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@109a0000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x109a0000 0x30>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi11_bus &spi11_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_22: i2c@109a0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x109a0000 0xc0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c22_bus>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_11: usi@109b00c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109b00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x102c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_23: i2c@109b0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x109b0000 0xc0>;
+				interrupts = <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c23_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ufs_0_phy: phy@17e04000 {
+			compatible = "samsung,exynosautov9-ufs-phy";
+			reg = <0x17e04000 0xc00>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&xtcxo>;
+			clock-names = "ref_clk";
+			status = "disabled";
+		};
+
+		ufs_0: ufs@17e00000 {
+			compatible = "samsung,exynosautov9-ufs";
+
+			reg = <0x17e00000 0x100>,
+			      <0x17e01100 0x410>,
+			      <0x17e80000 0x8000>,
+			      <0x17dc0000 0x2200>;
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>,
+				 <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			phys = <&ufs_0_phy>;
+			phy-names = "ufs-phy";
+			samsung,sysreg = <&syscon_fsys2 0x710>;
+			status = "disabled";
+		};
+
+		ufs_1_phy: phy@17f04000 {
+			compatible = "samsung,exynosautov9-ufs-phy";
+			reg = <0x17f04000 0xc00>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller 0x72c>;
+			#phy-cells = <0>;
+			clocks = <&xtcxo>;
+			clock-names = "ref_clk";
+			status = "disabled";
+		};
+
+		ufs_1: ufs@17f00000 {
+			compatible = "samsung,exynosautov9-ufs";
+
+			reg = <0x17f00000 0x100>,
+			      <0x17f01100 0x410>,
+			      <0x17f80000 0x8000>,
+			      <0x17de0000 0x2200>;
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_ACLK>,
+				 <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n_1 &ufs_refclk_out_1>;
+			phys = <&ufs_1_phy>;
+			phy-names = "ufs-phy";
+			samsung,sysreg = <&syscon_fsys2 0x714>;
+			status = "disabled";
+		};
+
+		watchdog_cl0: watchdog@10050000 {
+			compatible = "samsung,exynosautov9-wdt";
+			reg = <0x10050000 0x100>;
+			interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER0>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+		};
+
+		watchdog_cl1: watchdog@10060000 {
+			compatible = "samsung,exynosautov9-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER1>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+		};
+
+		pwm: pwm@103f0000 {
+			compatible = "samsung,exynosautov9-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x103f0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynosautov9-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
new file mode 100644
index 0000000000..89aee6c925
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
+
+fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo
+fsl-ls1028a-qds-65bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-65bb.dtbo
+fsl-ls1028a-qds-7777-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-7777.dtbo
+fsl-ls1028a-qds-85bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-85bb.dtbo
+fsl-ls1028a-qds-899b-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-899b.dtbo
+fsl-ls1028a-qds-9999-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-9999.dtbo
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop-baseboard.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
+
+imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-mnt-reform2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+
+imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
+imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
+imx8mm-venice-gw72xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
+imx8mm-venice-gw72xx-0x-rs422-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo
+imx8mm-venice-gw72xx-0x-rs485-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo
+imx8mm-venice-gw73xx-0x-imx219-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
+imx8mm-venice-gw73xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rpidsi.dtbo
+imx8mm-venice-gw73xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
+imx8mm-venice-gw73xx-0x-rs422-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
+imx8mm-venice-gw73xx-0x-rs485-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
+imx8mp-venice-gw74xx-rpidsi-dtbs	:= imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-rpidsi.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rpidsi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
+
+dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
+dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
+dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
new file mode 100644
index 0000000000..2517528f68
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A Freedom Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A Freedom Board";
+	compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	serial@0 {
+		compatible = "nxp,sc16is740";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		clocks = <&sc16is7xx_clk>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		sc16is7xx_clk: clock-sc16is7xx {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+		clocks = <&sys_mclk>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
new file mode 100644
index 0000000000..e8562585d4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A FRWY Board.
+ *
+ * Copyright 2018 NXP
+ *
+ * Pramod Kumar <pramod.kumar_1@nxp.com>
+ *
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A FRWY Board";
+	compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	w25q16dw0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
new file mode 100644
index 0000000000..242f4b0cb3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Oxalis
+ *
+ * Copyright (c) 2019 Manivannan Sadhasivam
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "Oxalis";
+	compatible = "ebs-systart,oxalis", "fsl,ls1012a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	codec: audio-codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+		clocks = <&sys_mclk>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
new file mode 100644
index 0000000000..bbdf989058
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A QDS Board";
+	compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
+
+	aliases {
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <24576000>;
+		};
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst25wf040b", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "en25s64", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			codec: sgtl5000@a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				VDDA-supply = <&reg_3p3v>;
+				VDDIO-supply = <&reg_3p3v>;
+				clocks = <&sys_mclk>;
+			};
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
new file mode 100644
index 0000000000..e662677a6e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A RDB Board";
+	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+	aliases {
+		serial0 = &duart0;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	accelerometer@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+		interrupt-parent = <&gpio26>;
+		interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "INT1";
+	};
+
+	gyroscope@20 {
+		compatible = "nxp,fxas21002c";
+		reg = <0x20>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pcal9555a";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@25 {
+		compatible = "nxp,pcal9555a";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio26: gpio@26 {
+		compatible = "nxp,pcal9555a";
+		reg = <0x26>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	current-sensor@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
new file mode 100644
index 0000000000..a863022529
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -0,0 +1,577 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1012A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019-2020 NXP
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1012a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
+		rtic-a = &rtic_a;
+		rtic-b = &rtic_b;
+		rtic-c = &rtic_c;
+		rtic-d = &rtic_d;
+		sec-mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "sysclk";
+	};
+
+	coreclk: coreclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "coreclk";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		esdhc0: esdhc@1560000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1012a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+		};
+
+		esdhc1: esdhc@1580000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			broken-cd;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			rtic@60000 {
+				compatible = "fsl,sec-v5.4-rtic",
+					     "fsl,sec-v5.0-rtic",
+					     "fsl,sec-v4.0-rtic";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x60000 0x100>, <0x60e00 0x18>;
+				ranges = <0x0 0x60100 0x500>;
+
+				rtic_a: rtic-a@0 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x00 0x20>, <0x100 0x100>;
+				};
+
+				rtic_b: rtic-b@20 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x20 0x20>, <0x200 0x100>;
+				};
+
+				rtic_c: rtic-c@40 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x40 0x20>, <0x300 0x100>;
+				};
+
+				rtic_d: rtic-d@60 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x60 0x20>, <0x400 0x100>;
+				};
+			};
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		sec_mon: sec_mon@1e90000 {
+			compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
+				     "fsl,sec-v4.0-mon";
+			reg = <0x0 0x1e90000 0x0 0x10000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1012a-dcfg",
+				     "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1012a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk &coreclk>;
+			clock-names = "sysclk", "coreclk";
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
+			fsl,tmu-calibration = <0x00000000 0x00000025
+					       0x00000001 0x0000002c
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004c
+					       0x00000007 0x00000053
+					       0x00000008 0x00000059
+					       0x00000009 0x0000005f
+					       0x0000000a 0x00000066
+					       0x0000000b 0x0000006c
+
+					       0x00010000 0x00000026
+					       0x00010001 0x0000002d
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004d
+					       0x00010006 0x00000055
+					       0x00010007 0x0000005d
+					       0x00010008 0x00000065
+					       0x00010009 0x0000006d
+
+					       0x00020000 0x00000026
+					       0x00020001 0x00000030
+					       0x00020002 0x0000003a
+					       0x00020003 0x00000044
+					       0x00020004 0x0000004e
+					       0x00020005 0x00000059
+					       0x00020006 0x00000063
+
+					       0x00030000 0x00000014
+					       0x00030001 0x00000021
+					       0x00030002 0x0000002e
+					       0x00030003 0x0000003a
+					       0x00030004 0x00000047
+					       0x00030005 0x00000053
+					       0x00030006 0x00000060>;
+			big-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		dspi: spi@2100000 {
+			compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,ls1012a-wdt",
+				     "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
+			big-endian;
+		};
+
+		sai1: sai@2b50000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b50000 0x0 0x10000>;
+			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 47>,
+			       <&edma0 1 46>;
+			status = "disabled";
+		};
+
+		sai2: sai@2b60000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b60000 0x0 0x10000>;
+			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 45>,
+			       <&edma0 1 44>;
+			status = "disabled";
+		};
+
+		edma0: dma-controller@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		usb0: usb@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x0 0x20140520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb1: usb@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <0 139 0x4>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		msi: msi-controller1@1572000 {
+			compatible = "fsl,ls1012a-msi";
+			reg = <0x0 0x1572000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1012a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>, /* controller interrupt */
+				     <0 117 0x4>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1012a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
new file mode 100644
index 0000000000..af9194eca5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree File for the Kontron KBox A-230-LS.
+ *
+ * This consists of a Kontron SMARC-sAL28 (Dual PHY) and a special
+ * carrier (s1914).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28-var4.dts"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Kontron KBox A-230-LS";
+	compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
+		     "kontron,sl28", "fsl,ls1028a";
+
+	leds {
+		compatible = "gpio-leds";
+
+		alarm-led {
+			function = LED_FUNCTION_ALARM;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&sl28cpld_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		power-led {
+			linux,default-trigger = "default-on";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&sl28cpld_gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&enetc_mdio_pf3 {
+	/* BCM54140 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@7 {
+		reg = <7>;
+	};
+
+	qsgmii_phy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+
+	qsgmii_phy2: ethernet-phy@9 {
+		reg = <9>;
+	};
+
+	qsgmii_phy3: ethernet-phy@10 {
+		reg = <10>;
+	};
+};
+
+&enetc_port2 {
+	nvmem-cells = <&base_mac_address 2>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&enetc_port3 {
+	nvmem-cells = <&base_mac_address 3>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 4>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 5>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 6>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 7>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	status = "okay";
+};
+
+&mscc_felix_port5 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
new file mode 100644
index 0000000000..1f34c75534
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 1 which has one ethernet port. It is
+ * different than the base variant, which also has one port, but here the
+ * port is connected via RGMII. This port is not TSN aware.
+ * None of the  four SerDes lanes are used by the module, instead they are
+ * all led out to the carrier for customer use.
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+	model = "Kontron SMARC-sAL28 (4 Lanes)";
+	compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	/* Delete unused phy node */
+	/delete-node/ ethernet-phy@5;
+
+	phy0: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+		qca,clk-out-frequency = <125000000>;
+		qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+		qca,keep-pll-enabled;
+		vddio-supply = <&vddio>;
+
+		vddio: vddio-regulator {
+			regulator-name = "VDDIO";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vddh: vddh-regulator {
+			regulator-name = "VDDH";
+		};
+	};
+};
+
+&enetc_port0 {
+	status = "disabled";
+	/* Delete the phy-handle to the old phy0 label */
+	/delete-property/ phy-handle;
+};
+
+&enetc_port1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
new file mode 100644
index 0000000000..aac41192ca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 2 which has two ethernet ports. These
+ * ports are connected to the internal switch.
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (TSN-on-module)";
+	compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	phy1: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&enetc_port0 {
+	status = "disabled";
+	/*
+	 * In the base device tree the PHY at address 5 was assigned for
+	 * this port. On this module this PHY is connected to a switch
+	 * port instead. Therefore, delete the phy-handle property here.
+	 */
+	/delete-property/ phy-handle;
+};
+
+&enetc_port2 {
+	nvmem-cells = <&base_mac_address 2>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&enetc_port3 {
+	nvmem-cells = <&base_mac_address 3>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&phy1>;
+	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	status = "okay";
+};
+
+&mscc_felix_port5 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
new file mode 100644
index 0000000000..ed4e69e87e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0
+ * carrier (ADS2).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
+	compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
+		     "kontron,sl28", "fsl,ls1028a";
+
+	pwm-fan {
+		compatible = "pwm-fan";
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		pwms = <&sl28cpld_pwm0 0 4000000>;
+		cooling-levels = <1 128 192 255>;
+	};
+
+	sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out Jack",
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "LINEOUTR",
+			"Line Out Jack", "LINEOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN2L", "Microphone Jack",
+			"IN2R", "Microphone Jack";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			bitclock-master = <&dailink0_master>;
+			frame-master = <&dailink0_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai6>;
+			};
+
+			dailink0_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			bitclock-master = <&dailink1_master>;
+			frame-master = <&dailink1_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai5>;
+			};
+
+			dailink1_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+	};
+};
+
+&dspi2 {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&mclk>;
+		clock-names = "mclk";
+		assigned-clocks = <&mclk>;
+		assigned-clock-rates = <1250000>;
+	};
+};
+
+&sai5 {
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&soc {
+	mclk: clock-mclk@f130080 {
+		compatible = "fsl,vf610-sai-clock";
+		reg = <0x0 0xf130080 0x0 0x80>;
+		clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+				    QORIQ_CLK_PLL_DIV(2)>;
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
new file mode 100644
index 0000000000..a4421db378
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 4 which has two ethernet ports. It
+ * extends the base and provides one more port connected via RGMII.
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+	model = "Kontron SMARC-sAL28 (Dual PHY)";
+	compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	phy1: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+		qca,clk-out-frequency = <125000000>;
+		qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+		qca,keep-pll-enabled;
+		vddio-supply = <&vddio>;
+
+		vddio: vddio-regulator {
+			regulator-name = "VDDIO";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vddh: vddh-regulator {
+			regulator-name = "VDDH";
+		};
+	};
+};
+
+&enetc_port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
new file mode 100644
index 0000000000..8b65af4a71
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kontron SMARC-sAL28";
+	compatible = "kontron,sl28", "fsl,ls1028a";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &lpuart1;
+		spi0 = &fspi;
+		spi1 = &dspi2;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc;
+		rtc0 = &rtc;
+		rtc1 = &ftm_alarm0;
+	};
+
+	buttons0 {
+		compatible = "gpio-keys";
+
+		power-button {
+			interrupts-extended = <&sl28cpld_intc
+					       4 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_POWER>;
+			label = "Power";
+		};
+
+		sleep-button {
+			interrupts-extended = <&sl28cpld_intc
+					       5 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_SLEEP>;
+			label = "Sleep";
+		};
+	};
+
+	buttons1 {
+		compatible = "gpio-keys-polled";
+		poll-interval = <200>;
+
+		lid-switch {
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>;
+			label = "Lid";
+		};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dspi2 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_mdio_pf3 {
+	phy0: ethernet-phy@5 {
+		reg = <0x5>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <133000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x000000 0x010000>;
+				label = "rcw";
+				read-only;
+			};
+
+			partition@10000 {
+				reg = <0x010000 0x1d0000>;
+				label = "failsafe bootloader";
+				read-only;
+			};
+
+			partition@200000 {
+				reg = <0x200000 0x010000>;
+				label = "configuration store";
+			};
+
+			partition@210000 {
+				reg = <0x210000 0x1d0000>;
+				label = "bootloader";
+			};
+
+			partition@3e0000 {
+				reg = <0x3e0000 0x020000>;
+				label = "bootloader environment";
+			};
+		};
+
+		otp-1 {
+			compatible = "user-otp";
+
+			nvmem-layout {
+				compatible = "kontron,sl28-vpd";
+
+				serial_number: serial-number {
+				};
+
+				base_mac_address: base-mac-address {
+					#nvmem-cell-cells = <1>;
+				};
+			};
+		};
+	};
+};
+
+&ftm_alarm0 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "TDO", "TCK",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "TMS", "TDI",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc: rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	sl28cpld@4a {
+		compatible = "kontron,sl28cpld";
+		reg = <0x4a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		watchdog@4 {
+			compatible = "kontron,sl28cpld-wdt";
+			reg = <0x4>;
+			kontron,assert-wdt-timeout-pin;
+		};
+
+		hwmon@b {
+			compatible = "kontron,sl28cpld-fan";
+			reg = <0xb>;
+		};
+
+		sl28cpld_pwm0: pwm@c {
+			compatible = "kontron,sl28cpld-pwm";
+			reg = <0xc>;
+			#pwm-cells = <2>;
+		};
+
+		sl28cpld_pwm1: pwm@e {
+			compatible = "kontron,sl28cpld-pwm";
+			reg = <0xe>;
+			#pwm-cells = <2>;
+		};
+
+		sl28cpld_gpio0: gpio@10 {
+			compatible = "kontron,sl28cpld-gpio";
+			reg = <0x10>;
+			interrupts-extended = <&gpio2 6
+					       IRQ_TYPE_EDGE_FALLING>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N",
+				"GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N",
+				"GPIO4_HDA_RST_N", "GPIO5_PWM_OUT",
+				"GPIO6_TACHIN", "GPIO7";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sl28cpld_gpio1: gpio@15 {
+			compatible = "kontron,sl28cpld-gpio";
+			reg = <0x15>;
+			interrupts-extended = <&gpio2 6
+					       IRQ_TYPE_EDGE_FALLING>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"GPIO8", "GPIO9", "GPIO10", "GPIO11",
+				"", "", "", "";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sl28cpld_gpio2: gpio@1a {
+			compatible = "kontron,sl28cpld-gpo";
+			reg = <0x1a>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"LCD0 voltage enable",
+				"LCD0 backlight enable",
+				"eMMC reset", "LVDS bridge reset",
+				"LVDS bridge power-down",
+				"SDIO power enable",
+				"", "";
+		};
+
+		sl28cpld_gpio3: gpio@1b {
+			compatible = "kontron,sl28cpld-gpi";
+			reg = <0x1b>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"Power button", "Force recovery", "Sleep",
+				"Battery low", "Lid state", "Charging",
+				"Charger present", "";
+		};
+
+		sl28cpld_intc: interrupt-controller@1c {
+			compatible = "kontron,sl28cpld-intc";
+			reg = <0x1c>;
+			interrupts-extended = <&gpio2 6
+					       IRQ_TYPE_EDGE_FALLING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&lpuart1 {
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	dsa-tag-protocol = "ocelot-8021q";
+};
+
+&mscc_felix_port5 {
+	dsa-tag-protocol = "ocelot-8021q";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
new file mode 100644
index 0000000000..f826392c23
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 13bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
+ * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	slot1_sgmii: ethernet-phy@2 {
+		/* AQR112 */
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on AQR412 */
+	slot2_qxgmii0: ethernet-phy@0 {
+		reg = <0x0>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot2_qxgmii1: ethernet-phy@1 {
+		reg = <0x1>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot2_qxgmii2: ethernet-phy@2 {
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot2_qxgmii3: ethernet-phy@3 {
+		reg = <0x3>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii0>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii1>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii2>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii3>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso
new file mode 100644
index 0000000000..b949cac037
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 69xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	slot1_sgmii: ethernet-phy@2 {
+		/* AQR112 */
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "2500base-x";
+	status = "okay";
+};
+
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on VSC8514 */
+	slot2_qsgmii0: ethernet-phy@8 {
+		reg = <0x8>;
+	};
+
+	slot2_qsgmii1: ethernet-phy@9 {
+		reg = <0x9>;
+	};
+
+	slot2_qsgmii2: ethernet-phy@a {
+		reg = <0xa>;
+	};
+
+	slot2_qsgmii3: ethernet-phy@b {
+		reg = <0xb>;
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii0>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii1>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii2>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii3>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
new file mode 100644
index 0000000000..1dff68d748
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 7777
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
+ * disabled, plugged in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on AQR412 */
+	slot1_sxgmii0: ethernet-phy@0 {
+		reg = <0x0>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot1_sxgmii1: ethernet-phy@1 {
+		reg = <0x1>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot1_sxgmii2: ethernet-phy@2 {
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot1_sxgmii3: ethernet-phy@3 {
+		reg = <0x3>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii0>;
+		phy-mode = "2500base-x";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii1>;
+		phy-mode = "2500base-x";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii2>;
+		phy-mode = "2500base-x";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii3>;
+		phy-mode = "2500base-x";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso
new file mode 100644
index 0000000000..19424d3497
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	slot1_sgmii: ethernet-phy@1c {
+		/* 1st port on VSC8234 */
+		reg = <0x1c>;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on VSC8514 */
+	slot2_qsgmii0: ethernet-phy@8 {
+		reg = <0x8>;
+	};
+
+	slot2_qsgmii1: ethernet-phy@9 {
+		reg = <0x9>;
+	};
+
+	slot2_qsgmii2: ethernet-phy@a {
+		reg = <0xa>;
+	};
+
+	slot2_qsgmii3: ethernet-phy@b {
+		reg = <0xb>;
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii0>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii1>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii2>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii3>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso
new file mode 100644
index 0000000000..fb85847f77
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VSC8234 */
+	slot1_sgmii0: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
+
+	slot1_sgmii1: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	slot1_sgmii2: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	slot1_sgmii3: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii0>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&mscc_felix_ports {
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii1>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii2>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso
new file mode 100644
index 0000000000..63e46fad22
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VSC8234 */
+	slot1_sgmii0: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
+
+	slot1_sgmii1: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	slot1_sgmii2: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	slot1_sgmii3: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii0>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii1>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii2>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii3>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
new file mode 100644
index 0000000000..0bb2f28a04
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1028A QDS Board.
+ *
+ * Copyright 2018 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "LS1028A QDS Board";
+	compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
+
+	aliases {
+		crypto = &crypto;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		mmc0 = &esdhc;
+		mmc1 = &esdhc1;
+		rtc1 = &ftm_alarm1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x00000000>;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+
+	mdio-mux {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 0>;
+		mdio-parent-bus = <&enetc_mdio_pf3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* on-board RGMII PHY */
+		mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			qds_phy1: ethernet-phy@5 {
+				/* Atheros 8035 */
+				reg = <5>;
+			};
+		};
+
+		mdio_slot1: mdio@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		mdio_slot2: mdio@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		mdio_slot3: mdio@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		mdio_slot4: mdio@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi1 {
+	bus-num = <1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi2 {
+	bus-num = <2>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_port1 {
+	phy-handle = <&qds_phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
+&ftm_alarm1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			current-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			current-monitor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			sgtl5000: audio-codec@a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_1p8v>;
+				clocks = <&sys_mclk>;
+			};
+		};
+	};
+
+	fpga@66 {
+		compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c",
+			     "simple-mfd";
+		reg = <0x66>;
+
+		mux: mux-controller {
+			compatible = "reg-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf0>; /* 0: reg 0x54, bits 7:4 */
+		};
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&lpuart1 {
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
new file mode 100644
index 0000000000..ecd2c1ea17
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1028A RDB Board.
+ *
+ * Copyright 2018-2021 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "LS1028A RDB Board";
+	compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		mmc0 = &esdhc;
+		mmc1 = &esdhc1;
+		rtc1 = &ftm_alarm1;
+		spi0 = &fspi;
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port2;
+		ethernet2 = &mscc_felix_port0;
+		ethernet3 = &mscc_felix_port1;
+		ethernet4 = &mscc_felix_port2;
+		ethernet5 = &mscc_felix_port3;
+		ethernet6 = &mscc_felix_port4;
+		ethernet7 = &mscc_felix_port5;
+		ethernet8 = &enetc_port3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0000000>;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai4>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_mdio_pf3 {
+	sgmii_phy0: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	/* VSC8514 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@10 {
+		reg = <0x10>;
+	};
+
+	qsgmii_phy1: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	qsgmii_phy2: ethernet-phy@12 {
+		reg = <0x12>;
+	};
+
+	qsgmii_phy3: ethernet-phy@13 {
+		reg = <0x13>;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&enetc_port3 {
+	status = "okay";
+};
+
+&esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
+&ftm_alarm1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9847";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			sgtl5000: audio-codec@a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_1p8v>;
+				clocks = <&sys_mclk>;
+				sclk-strength = <3>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			current-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	status = "okay";
+};
+
+&mscc_felix_port5 {
+	status = "okay";
+};
+
+&optee {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sai4 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
new file mode 100644
index 0000000000..eefe3577d9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -0,0 +1,1340 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1028A family SoC.
+ *
+ * Copyright 2018-2020 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1028a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PW20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			enable-method = "psci";
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PW20>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PW20: cpu-pw20 {
+			  compatible = "arm,idle-state";
+			  idle-state-name = "PW20";
+			  arm,psci-suspend-param = <0x0>;
+			  entry-latency-us = <2000>;
+			  exit-latency-us = <2000>;
+			  min-residency-us = <6000>;
+		};
+	};
+
+	rtc_clk: rtc-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "rtc_clk";
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	osc_27m: clock-osc-27m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-output-names = "phy_27m";
+	};
+
+	firmware {
+		optee: optee  {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+			status = "disabled";
+		};
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&rst>;
+		offset = <0>;
+		mask = <0x02>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+			<0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+					 IRQ_TYPE_LEVEL_LOW)>;
+		its: msi-controller@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
+		};
+	};
+
+	thermal-zones {
+		ddr-controller {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core_cluster_crit: core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+		};
+
+		dcfg: syscon@1e00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			ranges = <0x0 0x0 0x1e00000 0x10000>;
+			little-endian;
+
+			fspi_clk: clock-controller@900 {
+				compatible = "fsl,ls1028a-flexspi-clk";
+				reg = <0x900 0x4>;
+				#clock-cells = <0>;
+				clocks = <&clockgen QORIQ_CLK_HWACCEL 0>;
+				clock-output-names = "fspi_clk";
+			};
+		};
+
+		rst: syscon@1e60000 {
+			compatible = "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+			little-endian;
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1028a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ls1028a_uid: unique-id@1c {
+				reg = <0x1c 0x8>;
+			};
+		};
+
+		scfg: syscon@1fc0000 {
+			compatible = "fsl,ls1028a-scfg", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		clockgen: clock-controller@1300000 {
+			compatible = "fsl,ls1028a-clockgen";
+			reg = <0x0 0x1300000 0x0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		i2c0: i2c@2000000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2020000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@2030000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@2040000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2040000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@2050000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2050000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@2060000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2060000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@2070000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2070000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		fspi: spi@20c0000 {
+			compatible = "nxp,lx2160a-fspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "fspi_base", "fspi_mmap";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&fspi_clk>, <&fspi_clk>;
+			clock-names = "fspi_en", "fspi";
+			status = "disabled";
+		};
+
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dmas = <&edma0 0 62>, <&edma0 0 60>;
+			dma-names = "tx", "rx";
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dmas = <&edma0 0 58>, <&edma0 0 56>;
+			dma-names = "tx", "rx";
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dmas = <&edma0 0 54>, <&edma0 0 2>;
+			dma-names = "tx", "rx";
+			spi-num-chipselects = <3>;
+			little-endian;
+			status = "disabled";
+		};
+
+		esdhc: mmc@2140000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		esdhc1: mmc@2150000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2150000 0x0 0x10000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+			voltage-ranges = <1800 1800>;
+			sdhci,auto-cmd12;
+			non-removable;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		can0: can@2180000 {
+			compatible = "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@2190000 {
+			compatible = "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+
+		lpuart0: serial@2260000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x2260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 32>,
+			       <&edma0 1 33>;
+			status = "disabled";
+		};
+
+		lpuart1: serial@2270000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x2270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 30>,
+			       <&edma0 1 31>;
+			status = "disabled";
+		};
+
+		lpuart2: serial@2280000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x2280000 0x0 0x1000>;
+			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 28>,
+			       <&edma0 1 29>;
+			status = "disabled";
+		};
+
+		lpuart3: serial@2290000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x2290000 0x0 0x1000>;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 26>,
+			       <&edma0 1 27>;
+			status = "disabled";
+		};
+
+		lpuart4: serial@22a0000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x22a0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 24>,
+			       <&edma0 1 25>;
+			status = "disabled";
+		};
+
+		lpuart5: serial@22b0000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x22b0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 22>,
+			       <&edma0 1 23>;
+			status = "disabled";
+		};
+
+		edma0: dma-controller@22c0000 {
+			#dma-cells = <2>;
+			compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
+			reg = <0x0 0x22c0000 0x0 0x10000>,
+			      <0x0 0x22d0000 0x0 0x10000>,
+			      <0x0 0x22e0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+		};
+
+		gpio1: gpio@2300000 {
+			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			little-endian;
+		};
+
+		gpio2: gpio@2310000 {
+			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			little-endian;
+		};
+
+		gpio3: gpio@2320000 {
+			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			little-endian;
+		};
+
+		usb0: usb@3100000 {
+			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		usb1: usb@3110000 {
+			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1028a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep1: pcie-ep@3400000 {
+			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000
+			       0x80 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep2: pcie-ep@3500000 {
+			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000
+			       0x88 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			status = "disabled";
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#global-interrupts = <8>;
+			#iommu-cells = <1>;
+			dma-coherent;
+			stream-match-mask = <0x7c00>;
+			/* global secure fault */
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			/* combined secure interrupt */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			/* global non-secure fault */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			/* combined non-secure interrupt */
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			/* performance counter interrupts 0-7 */
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+			/* per context interrupt, 64 interrupts */
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+		};
+
+		cluster1_core0_watchdog: watchdog@c000000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core1_watchdog: watchdog@c010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		malidp0: display@f080000 {
+			compatible = "arm,mali-dp500";
+			reg = <0x0 0xf080000 0x0 0x10000>;
+			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "DE", "SE";
+			clocks = <&dpclk>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>;
+			clock-names = "pxlclk", "mclk", "aclk", "pclk";
+			arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+			arm,malidp-arqos-value = <0xd000d000>;
+
+			port {
+				dpi0_out: endpoint {
+
+				};
+			};
+		};
+
+		gpu: gpu@f0c0000 {
+			compatible = "vivante,gc";
+			reg = <0x0 0xf0c0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 2>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>;
+			clock-names = "core", "shader", "bus";
+			#cooling-cells = <2>;
+		};
+
+		sai1: audio-controller@f100000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 4>,
+			       <&edma0 1 3>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai2: audio-controller@f110000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 6>,
+			       <&edma0 1 5>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai3: audio-controller@f120000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 8>,
+			       <&edma0 1 7>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai4: audio-controller@f130000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf130000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 10>,
+			       <&edma0 1 9>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai5: audio-controller@f140000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 12>,
+			       <&edma0 1 11>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai6: audio-controller@f150000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf150000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 14>,
+			       <&edma0 1 13>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		dpclk: clock-controller@f1f0000 {
+			compatible = "fsl,ls1028a-plldig";
+			reg = <0x0 0xf1f0000 0x0 0x10000>;
+			#clock-cells = <0>;
+			clocks = <&osc_27m>;
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+			fsl,tmu-calibration = <0x00000000 0x00000024
+					       0x00000001 0x0000002b
+					       0x00000002 0x00000031
+					       0x00000003 0x00000038
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000045
+					       0x00000006 0x0000004c
+					       0x00000007 0x00000053
+					       0x00000008 0x00000059
+					       0x00000009 0x00000060
+					       0x0000000a 0x00000066
+					       0x0000000b 0x0000006d
+
+					       0x00010000 0x0000001c
+					       0x00010001 0x00000024
+					       0x00010002 0x0000002c
+					       0x00010003 0x00000035
+					       0x00010004 0x0000003d
+					       0x00010005 0x00000045
+					       0x00010006 0x0000004d
+					       0x00010007 0x00000055
+					       0x00010008 0x0000005e
+					       0x00010009 0x00000066
+					       0x0001000a 0x0000006e
+
+					       0x00020000 0x00000018
+					       0x00020001 0x00000022
+					       0x00020002 0x0000002d
+					       0x00020003 0x00000038
+					       0x00020004 0x00000043
+					       0x00020005 0x0000004d
+					       0x00020006 0x00000058
+					       0x00020007 0x00000063
+					       0x00020008 0x0000006e
+
+					       0x00030000 0x00000010
+					       0x00030001 0x0000001c
+					       0x00030002 0x00000029
+					       0x00030003 0x00000036
+					       0x00030004 0x00000042
+					       0x00030005 0x0000004f
+					       0x00030006 0x0000005b
+					       0x00030007 0x00000068>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcie@1f0000000 { /* Integrated Endpoint Root Complex */
+			compatible = "pci-host-ecam-generic";
+			reg = <0x01 0xf0000000 0x0 0x100000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			msi-parent = <&its>;
+			device_type = "pci";
+			bus-range = <0x0 0x0>;
+			dma-coherent;
+			msi-map = <0 &its 0x17 0xe>;
+			iommu-map = <0 &smmu 0x17 0xe>;
+				  /* PF0-6 BAR0 - non-prefetchable memory */
+			ranges = <0x82000000 0x1 0xf8000000  0x1 0xf8000000  0x0 0x160000
+				  /* PF0-6 BAR2 - prefetchable memory */
+				  0xc2000000 0x1 0xf8160000  0x1 0xf8160000  0x0 0x070000
+				  /* PF0: VF0-1 BAR0 - non-prefetchable memory */
+				  0x82000000 0x1 0xf81d0000  0x1 0xf81d0000  0x0 0x020000
+				  /* PF0: VF0-1 BAR2 - prefetchable memory */
+				  0xc2000000 0x1 0xf81f0000  0x1 0xf81f0000  0x0 0x020000
+				  /* PF1: VF0-1 BAR0 - non-prefetchable memory */
+				  0x82000000 0x1 0xf8210000  0x1 0xf8210000  0x0 0x020000
+				  /* PF1: VF0-1 BAR2 - prefetchable memory */
+				  0xc2000000 0x1 0xf8230000  0x1 0xf8230000  0x0 0x020000
+				  /* BAR4 (PF5) - non-prefetchable memory */
+				  0x82000000 0x1 0xfc000000  0x1 0xfc000000  0x0 0x400000>;
+
+			enetc_port0: ethernet@0,0 {
+				compatible = "fsl,enetc";
+				reg = <0x000000 0 0 0 0>;
+				status = "disabled";
+			};
+
+			enetc_port1: ethernet@0,1 {
+				compatible = "fsl,enetc";
+				reg = <0x000100 0 0 0 0>;
+				status = "disabled";
+			};
+
+			enetc_port2: ethernet@0,2 {
+				compatible = "fsl,enetc";
+				reg = <0x000200 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			enetc_mdio_pf3: mdio@0,3 {
+				compatible = "fsl,enetc-mdio";
+				reg = <0x000300 0 0 0 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			ethernet@0,4 {
+				compatible = "fsl,enetc-ptp";
+				reg = <0x000400 0 0 0 0>;
+				clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
+				little-endian;
+				fsl,extts-fifo;
+			};
+
+			mscc_felix: ethernet-switch@0,5 {
+				reg = <0x000500 0 0 0 0>;
+				/* IEP INT_B */
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+
+				mscc_felix_ports: ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* External ports */
+					mscc_felix_port0: port@0 {
+						reg = <0>;
+						status = "disabled";
+					};
+
+					mscc_felix_port1: port@1 {
+						reg = <1>;
+						status = "disabled";
+					};
+
+					mscc_felix_port2: port@2 {
+						reg = <2>;
+						status = "disabled";
+					};
+
+					mscc_felix_port3: port@3 {
+						reg = <3>;
+						status = "disabled";
+					};
+
+					/* Internal ports */
+					mscc_felix_port4: port@4 {
+						reg = <4>;
+						phy-mode = "internal";
+						ethernet = <&enetc_port2>;
+						status = "disabled";
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+							pause;
+						};
+					};
+
+					mscc_felix_port5: port@5 {
+						reg = <5>;
+						phy-mode = "internal";
+						ethernet = <&enetc_port3>;
+						status = "disabled";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							pause;
+						};
+					};
+				};
+			};
+
+			enetc_port3: ethernet@0,6 {
+				compatible = "fsl,enetc";
+				reg = <0x000600 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			rcec@1f,0 {
+				reg = <0x00f800 0 0 0 0>;
+				/* IEP INT_A */
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		/* Integrated Endpoint Register Block */
+		ierb@1f0800000 {
+			compatible = "fsl,ls1028a-enetc-ierb";
+			reg = <0x01 0xf0800000 0x0 0x10000>;
+		};
+
+		pwm0: pwm@2800000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@2810000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2810000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@2820000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2820000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@2830000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2830000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@2840000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2840000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@2850000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2850000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@2860000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2860000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@2870000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2870000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1028a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ftm_alarm1: timer@2810000 {
+			compatible = "fsl,ls1028a-ftm-alarm";
+			reg = <0x0 0x2810000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
new file mode 100644
index 0000000000..5c4d7eef8b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree nodes for ls1043
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+
+};
+
+&fman0 {
+	fsl,erratum-a050385;
+
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+		pcs-handle-names = "qsgmii";
+	};
+
+	enet1: ethernet@e2000 {
+		pcsphy-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet5: ethernet@ea000 {
+		pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet6: ethernet@f0000 {
+	};
+
+	mdio@e1000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x1>;
+		};
+
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x2>;
+		};
+
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
new file mode 100644
index 0000000000..dda27ed7aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018-2021 NXP
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A QDS Board";
+	compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+		sgmii-riser-s1-p1 = &sgmii_phy_s1_p1;
+		sgmii-riser-s2-p1 = &sgmii_phy_s2_p1;
+		sgmii-riser-s3-p1 = &sgmii_phy_s3_p1;
+		sgmii-riser-s4-p1 = &sgmii_phy_s4_p1;
+		qsgmii-s1-p1 = &qsgmii_phy_s1_p1;
+		qsgmii-s1-p2 = &qsgmii_phy_s1_p2;
+		qsgmii-s1-p3 = &qsgmii_phy_s1_p3;
+		qsgmii-s1-p4 = &qsgmii_phy_s1_p4;
+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
+		emi1-slot1 = &ls1043mdio_s1;
+		emi1-slot2 = &ls1043mdio_s2;
+		emi1-slot3 = &ls1043mdio_s3;
+		emi1-slot4 = &ls1043mdio_s4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
+		reg = <0x2 0x0 0x0000100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 2 0 0x100>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy_s2_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&qsgmii_phy_s2_p2>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy_s2_p3>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy_s2_p4>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* DTSEC9/10GEC1 */
+		fixed-link = <1 1 10000 0 0>;
+		phy-connection-type = "xgmii";
+	};
+};
+
+&fpga {
+	mdio-mux-emi1@54 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;    /* BRDCFG4 */
+		mux-mask = <0xe0>; /* EMI1 */
+
+		/* On-board RGMII1 PHY */
+		ls1043mdio0: mdio@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+				reg = <0x1>;
+			};
+		};
+
+		/* On-board RGMII2 PHY */
+		ls1043mdio1: mdio@20 {
+			reg = <0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+				reg = <0x2>;
+			};
+		};
+
+		/* Slot 1 */
+		ls1043mdio_s1: mdio@40 {
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s1_p1: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+
+			qsgmii_phy_s1_p2: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+
+			qsgmii_phy_s1_p3: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+
+			qsgmii_phy_s1_p4: ethernet-phy@7 {
+				reg = <0x7>;
+			};
+
+			sgmii_phy_s1_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 2 */
+		ls1043mdio_s2: mdio@60 {
+			reg = <0x60>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s2_p1: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			qsgmii_phy_s2_p2: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			qsgmii_phy_s2_p3: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			qsgmii_phy_s2_p4: ethernet-phy@b {
+				reg = <0xb>;
+			};
+
+			sgmii_phy_s2_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 3 */
+		ls1043mdio_s3: mdio@80 {
+			reg = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s3_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 4 */
+		ls1043mdio_s4: mdio@a0 {
+			reg = <0xa0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s4_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
new file mode 100644
index 0000000000..26f8540cb1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A RDB Board";
+	compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	adt7461a@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c512";
+		reg = <0x52>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c512";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "pericom,pt7c4338";
+		reg = <0x68>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x8000000>;
+			big-endian;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			compatible = "fsl,ifc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		cpld: board-control@2,0 {
+			compatible = "fsl,ls1043ardb-cpld";
+			reg = <0x2 0x0 0x0000100>;
+		};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <100>;
+	};
+
+	slic@2 {
+		compatible = "maxim,ds26522";
+		reg = <2>;
+		spi-max-frequency = <2000000>;
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <50>;
+	};
+
+	slic@3 {
+		compatible = "maxim,ds26522";
+		reg = <3>;
+		spi-max-frequency = <2000000>;
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <50>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr105_phy>;
+		phy-connection-type = "xgmii";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		qsgmii_phy1: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+
+		qsgmii_phy2: ethernet-phy@5 {
+			reg = <0x5>;
+		};
+
+		qsgmii_phy3: ethernet-phy@6 {
+			reg = <0x6>;
+		};
+
+		qsgmii_phy4: ethernet-phy@7 {
+			reg = <0x7>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr105_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 132 4>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&uqe {
+	ucc_hdlc: ucc@2000 {
+		compatible = "fsl,ucc-hdlc";
+		rx-clock-name = "clk8";
+		tx-clock-name = "clk9";
+		fsl,rx-sync-clock = "rsync_pin";
+		fsl,tx-sync-clock = "tsync_pin";
+		fsl,tx-timeslot-mask = <0xfffffffe>;
+		fsl,rx-timeslot-mask = <0xfffffffe>;
+		fsl,tdm-framer-type = "e1";
+		fsl,tdm-id = <0>;
+		fsl,siram-entry-id = <0>;
+		fsl,tdm-interface;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
new file mode 100644
index 0000000000..f8acbefc80
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -0,0 +1,1024 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018, 2020 NXP
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "fsl,ls1043a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		rtc1 = &ftm_alarm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * We expect the enable-method for cpu's to be "psci", but this
+		 * is dependent on the SoC FW, which will fill this in.
+		 *
+		 * Currently supported enable-method is psci v0.2
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+		      /* DRAM space 1, size: 2GiB DRAM */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "shared-dma-pool";
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+			no-map;
+		};
+
+		qman_fqd: qman-fqd {
+			compatible = "shared-dma-pool";
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+			no-map;
+		};
+
+		qman_pfdr: qman-pfdr {
+			compatible = "shared-dma-pool";
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+			no-map;
+		};
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	thermal-zones {
+		ddr-controller {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core_cluster_crit: core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
+			     <1 14 0xf08>, /* Physical Non-Secure PPI */
+			     <1 11 0xf08>, /* Virtual PPI */
+			     <1 10 0xf08>; /* Hypervisor PPI */
+		fsl,erratum-a008585;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 106 0x4>,
+			     <0 107 0x4>,
+			     <0 95 0x4>,
+			     <0 97 0x4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+		dma-coherent;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1043a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1043a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1043a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <0 75 0x4>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <0 71 0x4>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <0 72 0x4>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <0 73 0x4>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <0 74 0x4>;
+			};
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1043a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
+			big-endian;
+		};
+
+		ifc: memory-controller@1530000 {
+			compatible = "fsl,ifc";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <0 43 0x4>;
+		};
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x4000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <0 99 0x4>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <0 144 0x4>;
+			big-endian;
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+			fsl,tmu-calibration = <0x00000000 0x00000023
+					       0x00000001 0x0000002a
+					       0x00000002 0x00000031
+					       0x00000003 0x00000037
+					       0x00000004 0x0000003e
+					       0x00000005 0x00000044
+					       0x00000006 0x0000004b
+					       0x00000007 0x00000051
+					       0x00000008 0x00000058
+					       0x00000009 0x0000005e
+					       0x0000000a 0x00000065
+					       0x0000000b 0x0000006b
+
+					       0x00010000 0x00000023
+					       0x00010001 0x0000002b
+					       0x00010002 0x00000033
+					       0x00010003 0x0000003b
+					       0x00010004 0x00000043
+					       0x00010005 0x0000004b
+					       0x00010006 0x00000054
+					       0x00010007 0x0000005c
+					       0x00010008 0x00000064
+					       0x00010009 0x0000006c
+
+					       0x00020000 0x00000021
+					       0x00020001 0x0000002c
+					       0x00020002 0x00000036
+					       0x00020003 0x00000040
+					       0x00020004 0x0000004b
+					       0x00020005 0x00000055
+					       0x00020006 0x0000005f
+
+					       0x00030000 0x00000013
+					       0x00030001 0x0000001d
+					       0x00030002 0x00000028
+					       0x00030003 0x00000032
+					       0x00030004 0x0000003d
+					       0x00030005 0x00000047
+					       0x00030006 0x00000052
+					       0x00030007 0x0000005c>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		qman: qman@1880000 {
+			compatible = "fsl,qman";
+			reg = <0x0 0x1880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&qman_fqd &qman_pfdr>;
+		};
+
+		bman: bman@1890000 {
+			compatible = "fsl,bman";
+			reg = <0x0 0x1890000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&bman_fbpr>;
+		};
+
+		bportals: bman-portals@508000000 {
+			ranges = <0x0 0x5 0x08000000 0x8000000>;
+		};
+
+		qportals: qman-portals@500000000 {
+			ranges = <0x0 0x5 0x00000000 0x8000000>;
+		};
+
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			dmas = <&edma0 1 38>,
+			       <&edma0 1 39>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <0 58 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <0 59 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		gpio1: gpio@2300000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2310000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2320000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@2330000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 134 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uqe: uqe@2400000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe", "simple-bus";
+			ranges = <0x0 0x0 0x2400000 0x40000>;
+			reg = <0x0 0x2400000 0x0 0x480>;
+			brg-frequency = <100000000>;
+			bus-frequency = <200000000>;
+			fsl,qe-num-riscs = <1>;
+			fsl,qe-num-snums = <28>;
+
+			qeic: qeic@80 {
+				compatible = "fsl,qe-ic";
+				reg = <0x80 0x80>;
+				#address-cells = <0>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			si1: si@700 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,ls1043-qe-si",
+						"fsl,t1040-qe-si";
+				reg = <0x700 0x80>;
+			};
+
+			siram1: siram@1000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,ls1043-qe-siram",
+						"fsl,t1040-qe-siram";
+				reg = <0x1000 0x800>;
+			};
+
+			ucc@2000 {
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+			};
+
+			ucc@2200 {
+				cell-index = <3>;
+				reg = <0x2200 0x200>;
+				interrupts = <34>;
+				interrupt-parent = <&qeic>;
+			};
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0x0 0x10000 0x6000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+					"fsl,cpm-muram-data";
+					reg = <0x0 0x6000>;
+				};
+			};
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <0 48 0x4>;
+			clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <0 49 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <0 50 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <0 51 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <0 83 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "wdog";
+			big-endian;
+		};
+
+		edma0: dma-controller@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <0 103 0x4>,
+				     <0 103 0x4>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		aux_bus: aux_bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@2f00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x2f00000 0x0 0x10000>;
+				interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+
+			usb1: usb@3000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3000000 0x0 0x10000>;
+				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+
+			usb2: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+
+			sata: sata@3200000 {
+				compatible = "fsl,ls1043a-ahci";
+				reg = <0x0 0x3200000 0x0 0x10000>,
+					<0x0 0x20140520 0x0 0x4>;
+				reg-names = "ahci", "sata-ecc";
+				interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+						    QORIQ_CLK_PLL_DIV(1)>;
+				dma-coherent;
+			};
+		};
+
+		msi1: msi-controller1@1571000 {
+			compatible = "fsl,ls1043a-msi";
+			reg = <0x0 0x1571000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 116 0x4>;
+		};
+
+		msi2: msi-controller2@1572000 {
+			compatible = "fsl,ls1043a-msi";
+			reg = <0x0 0x1572000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 126 0x4>;
+		};
+
+		msi3: msi-controller3@1573000 {
+			compatible = "fsl,ls1043a-msi";
+			reg = <0x0 0x1573000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 160 0x4>;
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1043a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
+					<0000 0 0 2 &gic 0 111 0x4>,
+					<0000 0 0 3 &gic 0 112 0x4>,
+					<0000 0 0 4 &gic 0 113 0x4>;
+			fsl,pcie-scfg = <&scfg 0>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls1043a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 120  0x4>,
+					<0000 0 0 2 &gic 0 121 0x4>,
+					<0000 0 0 3 &gic 0 122 0x4>,
+					<0000 0 0 4 &gic 0 123 0x4>;
+			fsl,pcie-scfg = <&scfg 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls1043a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
+					<0000 0 0 2 &gic 0 155 0x4>,
+					<0000 0 0 3 &gic 0 156 0x4>,
+					<0000 0 0 4 &gic 0 157 0x4>;
+			fsl,pcie-scfg = <&scfg 2>;
+			big-endian;
+			status = "disabled";
+		};
+
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1043a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
new file mode 100644
index 0000000000..4e33450939
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree nodes for ls1046
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+#include "qoriq-fman3-0-10g-1.dtsi"
+};
+
+&fman0 {
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+		pcsphy-handle = <&qsgmiib_pcs3>;
+		pcs-handle-names = "qsgmii";
+	};
+
+	enet1: ethernet@e2000 {
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet5: ethernet@ea000 {
+		pcsphy-handle = <&pcsphy5>, <&pcsphy5>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet6: ethernet@f0000 {
+	};
+
+	enet7: ethernet@f2000 {
+		pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@eb000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x1>;
+		};
+
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x2>;
+		};
+
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
new file mode 100644
index 0000000000..6d22efbd64
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2019 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A FRWY Board";
+	compatible = "fsl,ls1046a-frwy", "fsl,ls1046a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT8642SEV-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&duart2 {
+	status = "okay";
+};
+
+&duart3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+
+			eeprom@52 {
+				compatible = "onnn,cat24c04", "atmel,24c04";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NAND Flash */
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+
+};
+
+&qspi {
+	status = "okay";
+
+	mt25qu512a0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@f2000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+	};
+
+	mdio@fd000 {
+		qsgmii_phy1: ethernet-phy@1c {
+			reg = <0x1c>;
+		};
+
+		qsgmii_phy2: ethernet-phy@1d {
+			reg = <0x1d>;
+		};
+
+		qsgmii_phy3: ethernet-phy@1e {
+			reg = <0x1e>;
+		};
+
+		qsgmii_phy4: ethernet-phy@1f {
+			reg = <0x1f>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
new file mode 100644
index 0000000000..3b0ed9305f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018-2019 NXP
+ *
+ * Shaohui Xie <Shaohui.Xie@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A QDS Board";
+	compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
+
+	aliases {
+		emi1-slot1 = &ls1046mdio_s1;
+		emi1-slot2 = &ls1046mdio_s2;
+		emi1-slot4 = &ls1046mdio_s4;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+		sgmii-s1-p1 = &sgmii_phy_s1_p1;
+		sgmii-s1-p2 = &sgmii_phy_s1_p2;
+		sgmii-s1-p3 = &sgmii_phy_s1_p3;
+		sgmii-s1-p4 = &sgmii_phy_s1_p4;
+		sgmii-s4-p1 = &sgmii_phy_s4_p1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst25wf040b", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "en25s64", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
+		reg = <0x2 0x0 0x0000100>;
+		ranges = <0 2 0 0x100>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy_s2_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&sgmii_phy_s4_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy_s1_p3>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy_s1_p4>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* DTSEC9/10GEC1 */
+		phy-handle = <&sgmii_phy_s1_p1>;
+		phy-connection-type = "xgmii";
+	};
+
+	ethernet@f2000 { /* DTSEC10/10GEC2 */
+		phy-handle = <&sgmii_phy_s1_p2>;
+		phy-connection-type = "xgmii";
+	};
+};
+
+&fpga {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	mdio-mux-emi1 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;    /* BRDCFG4 */
+		mux-mask = <0xe0>; /* EMI1 */
+
+		/* On-board RGMII1 PHY */
+		ls1046mdio0: mdio@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+				reg = <0x1>;
+			};
+		};
+
+		/* On-board RGMII2 PHY */
+		ls1046mdio1: mdio@1 {
+			reg = <0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+				reg = <0x2>;
+			};
+		};
+
+		/* Slot 1 */
+		ls1046mdio_s1: mdio@2 {
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s1_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			sgmii_phy_s1_p2: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			sgmii_phy_s1_p3: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			sgmii_phy_s1_p4: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		/* Slot 2 */
+		ls1046mdio_s2: mdio@3 {
+			reg = <0x60>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s2_p1: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			qsgmii_phy_s2_p2: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			qsgmii_phy_s2_p3: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			qsgmii_phy_s2_p4: ethernet-phy@b {
+				reg = <0xb>;
+			};
+		};
+
+		/* Slot 4 */
+		ls1046mdio_s4: mdio@5 {
+			reg = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s4_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
new file mode 100644
index 0000000000..07f6cc6e35
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019-2020 NXP
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A RDB Board";
+	compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	mmc-hs200-1_8v;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+};
+
+&i2c0 {
+	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	temp-sensor@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "onnn,cat24c05", "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		/* IRQ_RTC_B -> IRQ05, active low */
+		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NAND Flashe and CPLD on board */
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+
+	cpld: board-control@2,0 {
+		compatible = "fsl,ls1046ardb-cpld";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
+&usb1 {
+	dr_mode = "otg";
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy2>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr106_phy>;
+		phy-connection-type = "xgmii";
+	};
+
+	ethernet@f2000 { /* 10GEC2 */
+		phy-connection-type = "10gbase-r";
+		managed = "in-band-status";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		sgmii_phy1: ethernet-phy@3 {
+			reg = <0x3>;
+		};
+
+		sgmii_phy2: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr106_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 131 4>;
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
new file mode 100644
index 0000000000..50f68ca5a9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -0,0 +1,989 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018, 2020 NXP
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "fsl,ls1046a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		rtc1 = &ftm_alarm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* Real size will be filled by bootloader */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	thermal-zones {
+		ddr-controller {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core_cluster_crit: core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
+		      <0x0 0x1420000 0 0x20000>, /* GICC */
+		      <0x0 0x1440000 0 0x20000>, /* GICH */
+		      <0x0 0x1460000 0 0x20000>; /* GICV */
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+					 IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+		dma-coherent;
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+
+		ifc: memory-controller@1530000 {
+			compatible = "fsl,ifc";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1046a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1046a-extirq", "fsl,ls1043a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qman: qman@1880000 {
+			compatible = "fsl,qman";
+			reg = <0x0 0x1880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&qman_fqd &qman_pfdr>;
+
+		};
+
+		bman: bman@1890000 {
+			compatible = "fsl,bman";
+			reg = <0x0 0x1890000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&bman_fbpr>;
+
+		};
+
+		qportals: qman-portals@500000000 {
+			ranges = <0x0 0x5 0x00000000 0x8000000>;
+		};
+
+		bportals: bman-portals@508000000 {
+			ranges = <0x0 0x5 0x08000000 0x8000000>;
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1046a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
+			big-endian;
+		};
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1046a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+			fsl,tmu-calibration =
+				/* Calibration data group 1 */
+				<0x00000000 0x00000023
+				0x00000001 0x00000029
+				0x00000002 0x0000002f
+				0x00000003 0x00000036
+				0x00000004 0x0000003c
+				0x00000005 0x00000042
+				0x00000006 0x00000049
+				0x00000007 0x0000004f
+				0x00000008 0x00000055
+				0x00000009 0x0000005c
+				0x0000000a 0x00000062
+				0x0000000b 0x00000068
+				/* Calibration data group 2 */
+				0x00010000 0x00000022
+				0x00010001 0x0000002a
+				0x00010002 0x00000032
+				0x00010003 0x0000003a
+				0x00010004 0x00000042
+				0x00010005 0x0000004a
+				0x00010006 0x00000052
+				0x00010007 0x0000005a
+				0x00010008 0x00000062
+				0x00010009 0x0000006a
+				/* Calibration data group 3 */
+				0x00020000 0x00000021
+				0x00020001 0x0000002b
+				0x00020002 0x00000035
+				0x00020003 0x0000003e
+				0x00020004 0x00000048
+				0x00020005 0x00000052
+				0x00020006 0x0000005c
+				/* Calibration data group 4 */
+				0x00030000 0x00000011
+				0x00030001 0x0000001a
+				0x00030002 0x00000024
+				0x00030003 0x0000002e
+				0x00030004 0x00000038
+				0x00030005 0x00000042
+				0x00030006 0x0000004c
+				0x00030007 0x00000056>;
+			big-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dspi: spi@2100000 {
+			compatible = "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dmas = <&edma0 1 38>,
+			       <&edma0 1 39>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			big-endian;
+		};
+
+		edma0: dma-controller@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+		};
+
+		aux_bus: aux_bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@2f00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x2f00000 0x0 0x10000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			usb1: usb@3000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3000000 0x0 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			usb2: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			sata: sata@3200000 {
+				compatible = "fsl,ls1046a-ahci";
+				reg = <0x0 0x3200000 0x0 0x10000>,
+					<0x0 0x20140520 0x0 0x4>;
+				reg-names = "ahci", "sata-ecc";
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+						    QORIQ_CLK_PLL_DIV(2)>;
+			};
+		};
+
+		msi1: msi-controller@1580000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi2: msi-controller@1590000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x1590000 0x0 0x10000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi3: msi-controller@15a0000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x15a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1046a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie_ep1: pcie_ep@3400000 {
+			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000>,
+			      <0x40 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls1046a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi2>, <&msi3>, <&msi1>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie_ep2: pcie_ep@3500000 {
+			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000>,
+			      <0x48 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls1046a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi3>, <&msi1>, <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie_ep3: pcie_ep@3600000 {
+			compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03600000 0x0 0x00100000>,
+			      <0x50 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			big-endian;
+			status = "disabled";
+		};
+
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1046a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "shared-dma-pool";
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+			no-map;
+		};
+
+		qman_fqd: qman-fqd {
+			compatible = "shared-dma-pool";
+			size = <0 0x800000>;
+			alignment = <0 0x800000>;
+			no-map;
+		};
+
+		qman_pfdr: qman-pfdr {
+			compatible = "shared-dma-pool";
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
new file mode 100644
index 0000000000..aa52ff73ff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1088A QDS Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "LS1088A QDS Board";
+	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-max-frequency = <3500000>;
+		reg = <1>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-max-frequency = <3500000>;
+		reg = <2>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ10_B */
+				interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+		};
+	};
+};
+
+&ifc {
+	ranges = <0 0 0x5 0x80000000 0x08000000
+		  2 0 0x5 0x30000000 0x00010000
+		  3 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x2 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x3 0x0 0x0000100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
new file mode 100644
index 0000000000..ee8e932628
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1088A RDB Board.
+ *
+ * Copyright 2017-2020 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "LS1088A RDB Board";
+	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+};
+
+&dpmac2 {
+	phy-handle = <&mdio2_aquantia_phy>;
+	phy-connection-type = "10gbase-r";
+	pcs-handle = <&pcs2>;
+};
+
+&dpmac3 {
+	phy-handle = <&mdio1_phy5>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+	phy-handle = <&mdio1_phy6>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+	phy-handle = <&mdio1_phy7>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+	phy-handle = <&mdio1_phy8>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_3>;
+};
+
+&dpmac7 {
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_3>;
+};
+
+&emdio1 {
+	status = "okay";
+
+	mdio1_phy5: ethernet-phy@c {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0xc>;
+	};
+
+	mdio1_phy6: ethernet-phy@d {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0xd>;
+	};
+
+	mdio1_phy7: ethernet-phy@e {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0xe>;
+	};
+
+	mdio1_phy8: ethernet-phy@f {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0xf>;
+	};
+
+	mdio1_phy1: ethernet-phy@1c {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1c>;
+	};
+
+	mdio1_phy2: ethernet-phy@1d {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1d>;
+	};
+
+	mdio1_phy3: ethernet-phy@1e {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1e>;
+	};
+
+	mdio1_phy4: ethernet-phy@1f {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1f>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	mdio2_aquantia_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
+				interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ifc {
+	ranges = <0 0 0x5 0x30000000 0x00010000
+		  2 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x0 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&pcs_mdio2 {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
new file mode 100644
index 0000000000..d4867d6cf4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Travese Ten64 (LS1088) board
+ * Based on fsl-ls1088a-rdb.dts
+ * Copyright 2017-2020 NXP
+ * Copyright 2019-2021 Traverse Technologies
+ *
+ * Author: Mathew McBride <matt@traverse.com.au>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Traverse Ten64";
+	compatible = "traverse,ten64", "fsl,ls1088a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+
+		/* Fired by system controller when
+		 * external power off (e.g ATX Power Button)
+		 * asserted
+		 */
+		button-powerdn {
+			label = "External Power Down";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		/* Rear Panel 'ADMIN' button (GPIO_H) */
+		button-admin {
+			label = "ADMIN button";
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "ten64:green:sfp1:down";
+			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "ten64:green:sfp2:up";
+			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "ten64:admin";
+			gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sfp_xg0: dpmac2-sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfplower_i2c>;
+		tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_xg1: dpmac1-sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpupper_i2c>;
+		tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+/* XG1 - Upper SFP */
+&dpmac1 {
+	sfp = <&sfp_xg1>;
+	pcs-handle = <&pcs1>;
+	phy-connection-type = "10gbase-r";
+	managed = "in-band-status";
+};
+
+/* XG0 - Lower SFP */
+&dpmac2 {
+	sfp = <&sfp_xg0>;
+	pcs-handle = <&pcs2>;
+	phy-connection-type = "10gbase-r";
+	managed = "in-band-status";
+};
+
+/* DPMAC3..6 is GE4 to GE8 */
+&dpmac3 {
+	phy-handle = <&mdio1_phy5>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+	phy-handle = <&mdio1_phy6>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+	phy-handle = <&mdio1_phy7>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+	phy-handle = <&mdio1_phy8>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_3>;
+};
+
+/* DPMAC7..10 is GE0 to GE3 */
+&dpmac7 {
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_3>;
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&emdio1 {
+	status = "okay";
+
+	mdio1_phy5: ethernet-phy@c {
+		reg = <0xc>;
+	};
+
+	mdio1_phy6: ethernet-phy@d {
+		reg = <0xd>;
+	};
+
+	mdio1_phy7: ethernet-phy@e {
+		reg = <0xe>;
+	};
+
+	mdio1_phy8: ethernet-phy@f {
+		reg = <0xf>;
+	};
+
+	mdio1_phy1: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
+
+	mdio1_phy2: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	mdio1_phy3: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	mdio1_phy4: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	sfpgpio: gpio@76 {
+		compatible = "ti,tca9539";
+		reg = <0x76>;
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		admin_led_lower {
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	at97sc: tpm@29 {
+		compatible = "atmel,at97sc3204t";
+		reg = <0x29>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	rx8035: rtc@32 {
+		compatible = "epson,rx8035";
+		reg = <0x32>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9540";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		sfpupper_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		sfplower_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
+
+&pcs_mdio2 {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	en25s64: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "bl3";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "mcfirmware";
+				reg = <0x300000 0x200000>;
+			};
+
+			partition@500000 {
+				label = "ubootenv";
+				reg = <0x500000 0x80000>;
+			};
+
+			partition@580000 {
+				label = "dpl";
+				reg = <0x580000 0x40000>;
+			};
+
+			partition@5C0000 {
+				label = "dpc";
+				reg = <0x5C0000 0x40000>;
+			};
+
+			partition@600000 {
+				label = "devicetree";
+				reg = <0x600000 0x40000>;
+			};
+		};
+	};
+
+	nand: flash@1 {
+		compatible = "spi-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* reserved for future boot direct from NAND flash
+			 * (this would use the same layout as the 8MiB NOR flash)
+			 */
+			partition@0 {
+				label = "nand-boot-reserved";
+				reg = <0 0x800000>;
+			};
+
+			/* recovery / install environment */
+			partition@800000 {
+				label = "recovery";
+				reg = <0x800000 0x2000000>;
+			};
+
+			/* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */
+			partition@2800000 {
+				label = "ubia";
+				reg = <0x2800000 0x6C00000>;
+			};
+
+			/* ubib (second OpenWrt) */
+			partition@9400000 {
+				label = "ubib";
+				reg = <0x9400000 0x6C00000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
new file mode 100644
index 0000000000..8f6090a9ae
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -0,0 +1,1051 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1088A family SoC.
+ *
+ * Copyright 2017-2020 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1088a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* We have 2 clusters having 4 Cortex-A53 cores each */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/
+		      <0x0 0x0c0c0000 0 0x2000>, /* GICC */
+		      <0x0 0x0c0d0000 0 0x1000>, /* GICH */
+		      <0x0 0x0c0e0000 0 0x20000>; /* GICV */
+		interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		its: msi-controller@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	thermal-zones {
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		soc {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				soc-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&reset>;
+		offset = <0x0>;
+		mask = <0x02>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+
+		clockgen: clocking@1300000 {
+			compatible = "fsl,ls1088a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dcfg: dcfg@1e00000 {
+			compatible = "fsl,ls1088a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		reset: syscon@1e60000 {
+			compatible = "fsl,ls1088a-reset", "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+		};
+
+		isc: syscon@1f70000 {
+			compatible = "fsl,ls1088a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller@14 {
+				compatible = "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1028a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+			fsl,tmu-calibration =
+				/* Calibration data group 1 */
+				<0x00000000 0x00000023
+				0x00000001 0x0000002a
+				0x00000002 0x00000030
+				0x00000003 0x00000037
+				0x00000004 0x0000003d
+				0x00000005 0x00000044
+				0x00000006 0x0000004a
+				0x00000007 0x00000051
+				0x00000008 0x00000057
+				0x00000009 0x0000005e
+				0x0000000a 0x00000064
+				0x0000000b 0x0000006b
+				/* Calibration data group 2 */
+				0x00010000 0x00000022
+				0x00010001 0x0000002a
+				0x00010002 0x00000032
+				0x00010003 0x0000003a
+				0x00010004 0x00000042
+				0x00010005 0x0000004a
+				0x00010006 0x00000052
+				0x00010007 0x0000005a
+				0x00010008 0x00000062
+				0x00010009 0x0000006a
+				/* Calibration data group 3 */
+				0x00020000 0x00000021
+				0x00020001 0x0000002b
+				0x00020002 0x00000035
+				0x00020003 0x00000040
+				0x00020004 0x0000004a
+				0x00020005 0x00000054
+				0x00020006 0x0000005e
+				/* Calibration data group 4 */
+				0x00030000 0x00000010
+				0x00030001 0x0000001c
+				0x00030002 0x00000027
+				0x00030003 0x00000032
+				0x00030004 0x0000003e
+				0x00030005 0x00000049
+				0x00030006 0x00000054
+				0x00030007 0x00000060>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dspi: spi@2100000 {
+			compatible = "fsl,ls1088a-dspi",
+				     "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			spi-num-chipselects = <6>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ifc: memory-controller@2240000 {
+			compatible = "fsl,ifc";
+			reg = <0x0 0x2240000 0x0 0x20000>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2000000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2020000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@2030000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			status = "disabled";
+		};
+
+		qspi: spi@20c0000 {
+			compatible = "fsl,ls2080a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@2140000 {
+			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clock-frequency = <0>;
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		usb0: usb@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		usb1: usb@3110000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1088a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1088a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <256>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep1: pcie-ep@3400000 {
+			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000>,
+			      <0x20 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <24>;
+			num-ob-windows = <256>;
+			max-functions = /bits/ 8 <2>;
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls1088a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep2: pcie-ep@3500000 {
+			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000>,
+			      <0x28 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <6>;
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls1088a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+			      <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep3: pcie-ep@3600000 {
+			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03600000 0x0 0x00100000>,
+			      <0x30 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <6>;
+			status = "disabled";
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#iommu-cells = <1>;
+			stream-match-mask = <0x7C00>;
+			dma-coherent;
+			#global-interrupts = <12>;
+				     // global secure fault
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined secure
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     // global non-secure fault
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined non-secure
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     // performance counter interrupts 0-7
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     // per context interrupt, 64 interrupts
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		console@8340020 {
+			compatible = "fsl,dpaa2-console";
+			reg = <0x00000000 0x08340020 0 0x2>;
+		};
+
+		ptp-timer@8b95000 {
+			compatible = "fsl,dpaa2-ptp";
+			reg = <0x0 0x8b95000 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			little-endian;
+			fsl,extts-fifo;
+		};
+
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		pcs_mdio1: mdio@8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio2: mdio@8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs2: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio3: mdio@8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs3_0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			pcs3_1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			pcs3_2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			pcs3_3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		pcs_mdio7: mdio@8c1f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs7_0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			pcs7_1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			pcs7_2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			pcs7_3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core1_watchdog: wdt@c010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core2_watchdog: wdt@c020000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc020000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core3_watchdog: wdt@c030000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc030000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core0_watchdog: wdt@c100000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc100000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core1_watchdog: wdt@c110000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc110000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core2_watchdog: wdt@c120000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc120000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core3_watchdog: wdt@c130000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc130000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 0>;	/* This is fixed-up by u-boot */
+			dma-coherent;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: ethernet@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <1>;
+				};
+
+				dpmac2: ethernet@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <2>;
+				};
+
+				dpmac3: ethernet@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <3>;
+				};
+
+				dpmac4: ethernet@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <4>;
+				};
+
+				dpmac5: ethernet@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <5>;
+				};
+
+				dpmac6: ethernet@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <6>;
+				};
+
+				dpmac7: ethernet@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <7>;
+				};
+
+				dpmac8: ethernet@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <8>;
+				};
+
+				dpmac9: ethernet@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <9>;
+				};
+
+				dpmac10: ethernet@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+				};
+			};
+		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1088a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
new file mode 100644
index 0000000000..f6c3ee78ac
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080a QDS Board.
+ *
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a QDS Board";
+	compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
new file mode 100644
index 0000000000..8b69151369
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080a RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Freescale Layerscape 2080a RDB Board";
+	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "disabled";
+
+	/* CS4340 PHYs */
+	mdio1_phy1: emdio1-phy@10 {
+		reg = <0x10>;
+	};
+
+	mdio1_phy2: emdio1-phy@11 {
+		reg = <0x11>;
+	};
+
+	mdio1_phy3: emdio1-phy@12 {
+		reg = <0x12>;
+	};
+
+	mdio1_phy4: emdio1-phy@13 {
+		reg = <0x13>;
+	};
+};
+
+&emdio2 {
+	/* AQR405 PHYs */
+	mdio2_phy1: emdio2-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: emdio2-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: emdio2-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: emdio2-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
new file mode 100644
index 0000000000..5517305039
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080a software Simulator model
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a software Simulator model";
+	compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
+
+	ethernet@2210000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		interrupts = <0 58 0x1>;
+	};
+};
+
+&ifc {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
new file mode 100644
index 0000000000..1aa38ed09a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright 2014-2016 Freescale Semiconductor, Inc.
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include "fsl-ls208xa.dtsi"
+
+&cpu {
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu4: cpu@200 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x200>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu5: cpu@201 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x201>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu6: cpu@300 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x300>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+		next-level-cache = <&cluster3_l2>;
+		cpu-idle-states = <&CPU_PW20>;
+		#cooling-cells = <2>;
+	};
+
+	cpu7: cpu@301 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x301>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cluster0_l2: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster1_l2: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster2_l2: l2-cache2 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster3_l2: l2-cache3 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	CPU_PW20: cpu-pw20 {
+		compatible = "arm,idle-state";
+		idle-state-name = "PW20";
+		arm,psci-suspend-param = <0x00010000>;
+		entry-latency-us = <2000>;
+		exit-latency-us = <2000>;
+		min-residency-us = <6000>;
+	};
+};
+
+&pcie1 {
+	reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+	      <0x10 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie2 {
+	reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+	      <0x12 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie3 {
+	reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+	      <0x14 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie4 {
+	reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
+	      <0x16 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&timer {
+	fsl,erratum-a008585;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
new file mode 100644
index 0000000000..4461e16fd5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS2081A RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Priyanka Jain <priyanka.jain@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+
+/ {
+	model = "NXP Layerscape 2081A RDB Board";
+	compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&dspi {
+	status = "okay";
+
+	n25q512a: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547: mux@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	status = "disabled";
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
new file mode 100644
index 0000000000..7c17b1bd45
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2088A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2088A QDS Board";
+	compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
new file mode 100644
index 0000000000..3e4e857db1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2088A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2088A RDB Board";
+	compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&dpmac1 {
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac2 {
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac3 {
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac4 {
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "okay";
+
+	mdio1_phy1: ethernet-phy@10 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x10>;
+	};
+
+	mdio1_phy2: ethernet-phy@11 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x11>;
+	};
+
+	mdio1_phy3: ethernet-phy@12 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x12>;
+	};
+
+	mdio1_phy4: ethernet-phy@13 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x13>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	mdio2_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: ethernet-phy@1 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: ethernet-phy@3 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x3>;
+	};
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
+
+&pcs_mdio2 {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio4 {
+	status = "okay";
+};
+
+&pcs_mdio5 {
+	status = "okay";
+};
+
+&pcs_mdio6 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
+&pcs_mdio8 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
new file mode 100644
index 0000000000..8581ea55d2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-2088A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include "fsl-ls208xa.dtsi"
+
+&cpu {
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x0>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x1>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x100>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x101>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu4: cpu@200 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x200>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+		next-level-cache = <&cluster2_l2>;
+		cpu-idle-states = <&CPU_PW20>;
+		#cooling-cells = <2>;
+	};
+
+	cpu5: cpu@201 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x201>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu6: cpu@300 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x300>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu7: cpu@301 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x301>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cluster0_l2: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster1_l2: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster2_l2: l2-cache2 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster3_l2: l2-cache3 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	CPU_PW20: cpu-pw20 {
+		compatible = "arm,idle-state";
+		idle-state-name = "PW20";
+		arm,psci-suspend-param = <0x0>;
+		entry-latency-us = <2000>;
+		exit-latency-us = <2000>;
+		min-residency-us = <6000>;
+	};
+};
+
+&pcie1 {
+	compatible = "fsl,ls2088a-pcie";
+	reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+	      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>;
+};
+
+&pcie2 {
+	compatible = "fsl,ls2088a-pcie";
+	reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+	      <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>;
+};
+
+&pcie3 {
+	compatible = "fsl,ls2088a-pcie";
+	reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+	      <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>;
+};
+
+&pcie4 {
+	compatible = "fsl,ls2088a-pcie";
+	reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
+	      <0x38 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
new file mode 100644
index 0000000000..e2c94da6d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+	phy-handle = <&mdio0_phy12>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac10 {
+	phy-handle = <&mdio0_phy13>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac11 {
+	phy-handle = <&mdio0_phy14>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac12 {
+	phy-handle = <&mdio0_phy15>;
+	phy-connection-type = "sgmii";
+};
+
+&esdhc {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	boardctrl: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd";
+		reg = <3 0 0x1000>;
+		ranges = <0 3 0 0x1000>;
+
+		mdio-mux-emi1@54 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			mdio-parent-bus = <&emdio1>;
+			reg = <0x54 1>;		/* BRDCFG4 */
+			mux-mask = <0xe0>;	/* EMI1_MDIO */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Child MDIO buses, one for each riser card:
+			 * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+			 * VSC8234 PHYs on the riser cards.
+			 */
+			mdio_mux3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio0_phy12: mdio-phy0@1c {
+					reg = <0x1c>;
+				};
+
+				mdio0_phy13: mdio-phy1@1d {
+					reg = <0x1d>;
+				};
+
+				mdio0_phy14: mdio-phy2@1e {
+					reg = <0x1e>;
+				};
+
+				mdio0_phy15: mdio-phy3@1f {
+					reg = <0x1f>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+	dflash1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <1>;
+	};
+	dflash2: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+	flash2: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <2>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
new file mode 100644
index 0000000000..537cecb13d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+&esdhc {
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+	     reg = <0x3 0x0 0x10000>;
+	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+	};
+
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-mux@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ_RTC_B -> IRQ06, active low */
+				interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
new file mode 100644
index 0000000000..717288bbdb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -0,0 +1,1260 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "fsl,ls2080a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+	};
+
+	cpu: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+			<0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
+			<0x0 0x0c0c0000 0 0x2000>, /* GICC */
+			<0x0 0x0c0d0000 0 0x1000>, /* GICH */
+			<0x0 0x0c0e0000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+
+		its: msi-controller@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	rstcr: syscon@1e60000 {
+		compatible = "fsl,ls2080a-rstcr", "syscon";
+		reg = <0x0 0x1e60000 0x0 0x4>;
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&rstcr>;
+		offset = <0x0>;
+		mask = <0x2>;
+	};
+
+	thermal-zones {
+		ddr-controller1 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				ddr-ctrler1-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-controller2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				ddr-ctrler2-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-controller3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				ddr-ctrler3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster1 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				core_cluster1_alert: core-cluster1-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster1-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster1_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		core-cluster2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 5>;
+
+			trips {
+				core_cluster2_alert: core-cluster2-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster2-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster2_alert>;
+					cooling-device =
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		core-cluster3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 6>;
+
+			trips {
+				core_cluster3_alert: core-cluster3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster3_alert>;
+					cooling-device =
+						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		core-cluster4 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 7>;
+
+			trips {
+				core_cluster4_alert: core-cluster4-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster4-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster4_alert>;
+					cooling-device =
+						<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
+			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 4>, /* Virtual PPI, active-low */
+			     <1 10 4>; /* Hypervisor PPI, active-low */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+
+		clockgen: clocking@1300000 {
+			compatible = "fsl,ls2080a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dcfg: dcfg@1e00000 {
+			compatible = "fsl,ls2080a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1028a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		isc: syscon@1f70000 {
+			compatible = "fsl,ls2080a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller@14 {
+				compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration = <0x00000000 0x00000026
+					       0x00000001 0x0000002d
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004d
+					       0x00000007 0x00000054
+					       0x00000008 0x0000005a
+					       0x00000009 0x00000061
+					       0x0000000a 0x0000006a
+					       0x0000000b 0x00000071
+
+					       0x00010000 0x00000025
+					       0x00010001 0x0000002c
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004e
+					       0x00010006 0x00000057
+					       0x00010007 0x00000061
+					       0x00010008 0x0000006b
+					       0x00010009 0x00000076
+
+					       0x00020000 0x00000029
+					       0x00020001 0x00000033
+					       0x00020002 0x0000003d
+					       0x00020003 0x00000049
+					       0x00020004 0x00000056
+					       0x00020005 0x00000061
+					       0x00020006 0x0000006d
+
+					       0x00030000 0x00000021
+					       0x00030001 0x0000002a
+					       0x00030002 0x0000003c
+					       0x00030003 0x0000004e>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		serial0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		serial1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		serial2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 33 0x4>; /* Level high type */
+		};
+
+		serial3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 33 0x4>; /* Level high type */
+		};
+
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core1_watchdog: wdt@c010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core0_watchdog: wdt@c100000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc100000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core1_watchdog: wdt@c110000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc110000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster3_core0_watchdog: wdt@c200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc200000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster3_core1_watchdog: wdt@c210000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc210000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster4_core0_watchdog: wdt@c300000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc300000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster4_core1_watchdog: wdt@c310000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc310000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		console@8340020 {
+			compatible = "fsl,dpaa2-console";
+			reg = <0x00000000 0x08340020 0 0x2>;
+		};
+
+		ptp-timer@8b95000 {
+			compatible = "fsl,dpaa2-ptp";
+			reg = <0x0 0x8b95000 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			little-endian;
+			fsl,extts-fifo;
+		};
+
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		pcs_mdio1: mdio@8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio2: mdio@8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs2: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio3: mdio@8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs3: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio4: mdio@8c13000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c13000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs4: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio5: mdio@8c17000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c17000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs5: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio6: mdio@8c1b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs6: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio7: mdio@8c1f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs7: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio8: mdio@8c23000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c23000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs8: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio9: mdio@8c27000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c27000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs9: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio10: mdio@8c2b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c2b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs10: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio11: mdio@8c2f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c2f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs11: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio12: mdio@8c33000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c33000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs12: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio13: mdio@8c37000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c37000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs13: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio14: mdio@8c3b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c3b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs14: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio15: mdio@8c3f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c3f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs15: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio16: mdio@8c43000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c43000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs16: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 0>;	/* This is fixed-up by u-boot */
+			dma-coherent;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			/*
+			 * Define the maximum number of MACs present on the SoC.
+			 */
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: ethernet@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x1>;
+					pcs-handle = <&pcs1>;
+				};
+
+				dpmac2: ethernet@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x2>;
+					pcs-handle = <&pcs2>;
+				};
+
+				dpmac3: ethernet@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x3>;
+					pcs-handle = <&pcs3>;
+				};
+
+				dpmac4: ethernet@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x4>;
+					pcs-handle = <&pcs4>;
+				};
+
+				dpmac5: ethernet@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x5>;
+					pcs-handle = <&pcs5>;
+				};
+
+				dpmac6: ethernet@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x6>;
+					pcs-handle = <&pcs6>;
+				};
+
+				dpmac7: ethernet@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x7>;
+					pcs-handle = <&pcs7>;
+				};
+
+				dpmac8: ethernet@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x8>;
+					pcs-handle = <&pcs8>;
+				};
+
+				dpmac9: ethernet@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x9>;
+					pcs-handle = <&pcs9>;
+				};
+
+				dpmac10: ethernet@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+					pcs-handle = <&pcs10>;
+				};
+
+				dpmac11: ethernet@b {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xb>;
+					pcs-handle = <&pcs11>;
+				};
+
+				dpmac12: ethernet@c {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xc>;
+					pcs-handle = <&pcs12>;
+				};
+
+				dpmac13: ethernet@d {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xd>;
+					pcs-handle = <&pcs13>;
+				};
+
+				dpmac14: ethernet@e {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xe>;
+					pcs-handle = <&pcs14>;
+				};
+
+				dpmac15: ethernet@f {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xf>;
+					pcs-handle = <&pcs15>;
+				};
+
+				dpmac16: ethernet@10 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x10>;
+					pcs-handle = <&pcs16>;
+				};
+			};
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#global-interrupts = <12>;
+			#iommu-cells = <1>;
+			stream-match-mask = <0x7C00>;
+			dma-coherent;
+			interrupts = <0 13 4>, /* global secure fault */
+				     <0 14 4>, /* combined secure interrupt */
+				     <0 15 4>, /* global non-secure fault */
+				     <0 16 4>, /* combined non-secure interrupt */
+				/* performance counter interrupts 0-7 */
+				     <0 211 4>, <0 212 4>,
+				     <0 213 4>, <0 214 4>,
+				     <0 215 4>, <0 216 4>,
+				     <0 217 4>, <0 218 4>,
+				/* per context interrupt, 64 interrupts */
+				     <0 146 4>, <0 147 4>,
+				     <0 148 4>, <0 149 4>,
+				     <0 150 4>, <0 151 4>,
+				     <0 152 4>, <0 153 4>,
+				     <0 154 4>, <0 155 4>,
+				     <0 156 4>, <0 157 4>,
+				     <0 158 4>, <0 159 4>,
+				     <0 160 4>, <0 161 4>,
+				     <0 162 4>, <0 163 4>,
+				     <0 164 4>, <0 165 4>,
+				     <0 166 4>, <0 167 4>,
+				     <0 168 4>, <0 169 4>,
+				     <0 170 4>, <0 171 4>,
+				     <0 172 4>, <0 173 4>,
+				     <0 174 4>, <0 175 4>,
+				     <0 176 4>, <0 177 4>,
+				     <0 178 4>, <0 179 4>,
+				     <0 180 4>, <0 181 4>,
+				     <0 182 4>, <0 183 4>,
+				     <0 184 4>, <0 185 4>,
+				     <0 186 4>, <0 187 4>,
+				     <0 188 4>, <0 189 4>,
+				     <0 190 4>, <0 191 4>,
+				     <0 192 4>, <0 193 4>,
+				     <0 194 4>, <0 195 4>,
+				     <0 196 4>, <0 197 4>,
+				     <0 198 4>, <0 199 4>,
+				     <0 200 4>, <0 201 4>,
+				     <0 202 4>, <0 203 4>,
+				     <0 204 4>, <0 205 4>,
+				     <0 206 4>, <0 207 4>,
+				     <0 208 4>, <0 209 4>;
+		};
+
+		dspi: spi@2100000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 26 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+		};
+
+		esdhc: esdhc@2140000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2c0: i2c@2000000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		i2c1: i2c@2010000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		i2c2: i2c@2020000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		i2c3: i2c@2030000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		ifc: memory-controller@2240000 {
+			compatible = "fsl,ifc";
+			reg = <0x0 0x2240000 0x0 0x20000>;
+			interrupts = <0 21 0x4>; /* Level high type */
+			little-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x5 0x80000000 0x08000000
+				  2 0 0x5 0x30000000 0x00010000
+				  3 0 0x5 0x20000000 0x00010000>;
+		};
+
+		qspi: spi@20c0000 {
+			compatible = "fsl,ls2080a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "qspi_en", "qspi";
+			status = "disabled";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 108 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
+					<0000 0 0 2 &gic 0 0 0 110 4>,
+					<0000 0 0 3 &gic 0 0 0 111 4>,
+					<0000 0 0 4 &gic 0 0 0 112 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 113 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
+					<0000 0 0 2 &gic 0 0 0 115 4>,
+					<0000 0 0 3 &gic 0 0 0 116 4>,
+					<0000 0 0 4 &gic 0 0 0 117 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <256>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
+					<0000 0 0 2 &gic 0 0 0 120 4>,
+					<0000 0 0 3 &gic 0 0 0 121 4>,
+					<0000 0 0 4 &gic 0 0 0 122 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie4: pcie@3700000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 123 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
+					<0000 0 0 2 &gic 0 0 0 125 4>,
+					<0000 0 0 3 &gic 0 0 0 126 4>,
+					<0000 0 0 4 &gic 0 0 0 127 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		sata0: sata@3200000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 133 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+		};
+
+		sata1: sata@3210000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>;
+			interrupts = <0 136 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+		};
+
+		bus: bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <0 80 0x4>; /* Level high type */
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+
+			usb1: usb@3110000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3110000 0x0 0x10000>;
+				interrupts = <0 81 0x4>; /* Level high type */
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+		};
+
+		ccn@4000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0x04000000 0x0 0x01000000>;
+			interrupts = <0 12 4>;
+		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls208xa-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	ddr1: memory-controller@1080000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1080000 0x0 0x1000>;
+		interrupts = <0 17 0x4>;
+		little-endian;
+	};
+
+	ddr2: memory-controller@1090000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1090000 0x0 0x1000>;
+		interrupts = <0 18 0x4>;
+		little-endian;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts
new file mode 100644
index 0000000000..15d273c931
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A BLUEBOX3
+//
+// Copyright 2020-2021 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a-bluebox3.dts"
+
+/ {
+	compatible = "fsl,lx2160a-bluebox3-rev-a", "fsl,lx2160a";
+};
+
+/* The RGMII PHYs have a different MDIO address */
+&emdio1 {
+	/delete-node/ ethernet-phy@5;
+
+	sw1_mii3_phy: ethernet-phy@1 {
+		/* AR8035 */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x1>;
+		interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/delete-node/ ethernet-phy@6;
+
+	sw2_mii3_phy: ethernet-phy@2 {
+		/* AR8035 */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x2>;
+		interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts
new file mode 100644
index 0000000000..042c486bdd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A BLUEBOX3
+//
+// Copyright 2020-2021 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160ABLUEBOX3";
+	compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MC34717-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&can0 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac5 {
+	phy-handle = <&aqr113c_phy1>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac6 {
+	phy-handle = <&aqr113c_phy2>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac9 {
+	phy-handle = <&aqr113c_phy3>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac10 {
+	phy-handle = <&aqr113c_phy4>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac17 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&dpmac18 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&emdio1 {
+	status = "okay";
+
+	aqr113c_phy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+		/* IRQ_10G_PHY2 */
+		interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	aqr113c_phy1: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x8>;
+		/* IRQ_10G_PHY1 */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	sw1_mii3_phy: ethernet-phy@5 {
+		/* AR8035 */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x5>;
+		interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	sw2_mii3_phy: ethernet-phy@6 {
+		/* AR8035 */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x6>;
+		interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	aqr113c_phy4: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+		/* IRQ_10G_PHY4 */
+		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	aqr113c_phy3: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x8>;
+		/* IRQ_10G_PHY3 */
+		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+
+	mt35xu512aba1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temp2: temperature-sensor@48 {
+				compatible = "nxp,sa56004";
+				reg = <0x48>;
+				vcc-supply = <&sb_3v3>;
+				#thermal-sensor-cells = <1>;
+			};
+
+			temp1: temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			i2c-mux@75 {
+				compatible = "nxp,pca9547";
+				reg = <0x75>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					spi_bridge: spi@28 {
+						compatible = "nxp,sc18is602b";
+						reg = <0x28>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9846";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			/* The I2C multiplexer and temperature sensors are on
+			 * the T6 riser card.
+			 */
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+
+					q12: temperature-sensor@4c {
+						compatible = "nxp,sa56004";
+						reg = <0x4c>;
+						vcc-supply = <&sb_3v3>;
+						#thermal-sensor-cells = <1>;
+					};
+				};
+
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+
+					q11: temperature-sensor@4c {
+						compatible = "nxp,sa56004";
+						reg = <0x4c>;
+						vcc-supply = <&sb_3v3>;
+						#thermal-sensor-cells = <1>;
+					};
+
+					q13: temperature-sensor@48 {
+						compatible = "nxp,sa56004";
+						reg = <0x48>;
+						vcc-supply = <&sb_3v3>;
+						#thermal-sensor-cells = <1>;
+					};
+
+					q14: temperature-sensor@4a {
+						compatible = "nxp,sa56004";
+						reg = <0x4a>;
+						vcc-supply = <&sb_3v3>;
+						#thermal-sensor-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&pcs_mdio5 {
+	status = "okay";
+};
+
+&pcs_mdio6 {
+	status = "okay";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
+
+&spi_bridge {
+	sw1: ethernet-switch@0 {
+		compatible = "nxp,sja1110a";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		spi-cpol;
+		dsa,member = <0 0>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Microcontroller port */
+			port@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			/* SW1_P1 */
+			port@1 {
+				reg = <1>;
+				label = "con_2x20";
+				phy-mode = "sgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				ethernet = <&dpmac17>;
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "1ge_p1";
+				phy-mode = "rgmii-id";
+				phy-handle = <&sw1_mii3_phy>;
+			};
+
+			sw1p4: port@4 {
+				reg = <4>;
+				link = <&sw2p1>;
+				phy-mode = "sgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "trx1";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port5_base_t1_phy>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "trx2";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port6_base_t1_phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "trx3";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port7_base_t1_phy>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "trx4";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port8_base_t1_phy>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "trx5";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port9_base_t1_phy>;
+			};
+
+			port@a {
+				reg = <10>;
+				label = "trx6";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port10_base_t1_phy>;
+			};
+		};
+
+		mdios {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 {
+				compatible = "nxp,sja1110-base-t1-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				sw1_port5_base_t1_phy: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+
+				sw1_port6_base_t1_phy: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+
+				sw1_port7_base_t1_phy: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x3>;
+				};
+
+				sw1_port8_base_t1_phy: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				sw1_port9_base_t1_phy: ethernet-phy@5 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x5>;
+				};
+
+				sw1_port10_base_t1_phy: ethernet-phy@6 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x6>;
+				};
+			};
+		};
+	};
+
+	sw2: ethernet-switch@2 {
+		compatible = "nxp,sja1110a";
+		reg = <2>;
+		spi-max-frequency = <4000000>;
+		spi-cpol;
+		dsa,member = <0 1>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Microcontroller port */
+			port@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			sw2p1: port@1 {
+				reg = <1>;
+				link = <&sw1p4>;
+				phy-mode = "sgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				ethernet = <&dpmac18>;
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "1ge_p2";
+				phy-mode = "rgmii-id";
+				phy-handle = <&sw2_mii3_phy>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "to_sw3";
+				phy-mode = "2500base-x";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "trx7";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port5_base_t1_phy>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "trx8";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port6_base_t1_phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "trx9";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port7_base_t1_phy>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "trx10";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port8_base_t1_phy>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "trx11";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port9_base_t1_phy>;
+			};
+
+			port@a {
+				reg = <10>;
+				label = "trx12";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port10_base_t1_phy>;
+			};
+		};
+
+		mdios {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 {
+				compatible = "nxp,sja1110-base-t1-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				sw2_port5_base_t1_phy: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+
+				sw2_port6_base_t1_phy: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+
+				sw2_port7_base_t1_phy: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x3>;
+				};
+
+				sw2_port8_base_t1_phy: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				sw2_port9_base_t1_phy: ethernet-phy@5 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x5>;
+				};
+
+				sw2_port10_base_t1_phy: ethernet-phy@6 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x6>;
+				};
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
new file mode 100644
index 0000000000..d32a52ab00
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A-CEx7
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "SolidRun LX2160A COM Express Type 7 module";
+	compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "RT7290";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <1>;
+		qca,smarteee-tw-us-1g = <24>;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c512";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,spd";
+				reg = <0x51>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,spd";
+				reg = <0x53>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			fan-temperature-ctrlr@18 {
+				compatible = "ti,amc6821";
+				reg = <0x18>;
+				cooling-min-state = <0>;
+				cooling-max-state = <9>;
+				#cooling-cells = <2>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			regulator@5c {
+				compatible = "lltc,ltc3882";
+				reg = <0x5c>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			temperature-sensor@48 {
+				compatible = "nxp,sa56004";
+				reg = <0x48>;
+				vcc-supply = <&sb_3v3>;
+			};
+		};
+
+		sfp0_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		sfp1_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		sfp2_i2c: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		sfp3_i2c: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,m25p80";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
new file mode 100644
index 0000000000..86a9b77142
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog CX board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Clearfog CX";
+	compatible = "solidrun,clearfog-cx",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
new file mode 100644
index 0000000000..a7dcbecc1f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog ITX board; this contains the
+// common parts shared between the Clearfog CX and Honeycomb builds.
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-cex7.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "power";
+			linux,can-disable;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sfp0: sfp-0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp0_i2c>;
+		mod-def0-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp1_i2c>;
+		mod-def0-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp2: sfp-2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp2_i2c>;
+		mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp3: sfp-3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp3_i2c>;
+		mod-def0-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&dpmac7 {
+	sfp = <&sfp0>;
+	managed = "in-band-status";
+	phys = <&serdes_1 3>;
+};
+
+&dpmac8 {
+	sfp = <&sfp1>;
+	managed = "in-band-status";
+	phys = <&serdes_1 2>;
+};
+
+&dpmac9 {
+	sfp = <&sfp2>;
+	managed = "in-band-status";
+	phys = <&serdes_1 1>;
+};
+
+&dpmac10 {
+	sfp = <&sfp3>;
+	managed = "in-band-status";
+	phys = <&serdes_1 0>;
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
+&pcs_mdio8 {
+	status = "okay";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
new file mode 100644
index 0000000000..fe19f3009e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Honeycomb board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Honeycomb";
+	compatible = "solidrun,honeycomb",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
new file mode 100644
index 0000000000..4d721197d8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160AQDS
+//
+// Copyright 2018 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS";
+	compatible = "fsl,lx2160a-qds", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MC34717-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	mdio-mux-1 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 0>;
+		mdio-parent-bus = <&emdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* On-board PHY #1 RGMI1*/
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@8 { /* On-board PHY #2 RGMI2*/
+			reg = <0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@18 { /* Slot #1 */
+			reg = <0x18>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@19 { /* Slot #2 */
+			reg = <0x19>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1a { /* Slot #3 */
+			reg = <0x1a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1b { /* Slot #4 */
+			reg = <0x1b>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1c { /* Slot #5 */
+			reg = <0x1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1d { /* Slot #6 */
+			reg = <0x1d>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1e { /* Slot #7 */
+			reg = <0x1e>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1f { /* Slot #8 */
+			reg = <0x1f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mdio-mux-2 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 1>;
+		mdio-parent-bus = <&emdio2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* Slot #1 (secondary EMI) */
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1 { /* Slot #2 (secondary EMI) */
+			reg = <0x01>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@2 { /* Slot #3 (secondary EMI) */
+			reg = <0x02>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@3 { /* Slot #4 (secondary EMI) */
+			reg = <0x03>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@4 { /* Slot #5 (secondary EMI) */
+			reg = <0x04>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@5 { /* Slot #6 (secondary EMI) */
+			reg = <0x05>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@6 { /* Slot #7 (secondary EMI) */
+			reg = <0x06>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@7 { /* Slot #8 (secondary EMI) */
+			reg = <0x07>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dspi0 {
+	status = "okay";
+
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	dflash1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi2 {
+	status = "okay";
+
+	dflash2: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	fpga@66 {
+		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
+			     "simple-mfd";
+		reg = <0x66>;
+
+		mux: mux-controller {
+			compatible = "reg-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+					<0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			temperature-sensor@4d {
+				compatible = "nxp,sa56004";
+				reg = <0x4d>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&optee {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
new file mode 100644
index 0000000000..0c44b3cbef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160ARDB
+//
+// Copyright 2018-2020 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160ARDB";
+	compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MC34717-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac3 {
+	phy-handle = <&aquantia_phy1>;
+	phy-connection-type = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac4 {
+	phy-handle = <&aquantia_phy2>;
+	phy-connection-type = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac5 {
+	phy-handle = <&inphi_phy>;
+};
+
+&dpmac6 {
+	phy-handle = <&inphi_phy>;
+};
+
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1>;
+		eee-broken-1000t;
+	};
+
+	rgmii_phy2: ethernet-phy@2 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x2>;
+		eee-broken-1000t;
+	};
+
+	aquantia_phy1: ethernet-phy@4 {
+		/* AQR107 PHY */
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x4>;
+	};
+
+	aquantia_phy2: ethernet-phy@5 {
+		/* AQR107 PHY */
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x5>;
+	};
+};
+
+&can0 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	inphi_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x0>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+
+	mt35xu512aba1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			temperature-sensor@4d {
+				compatible = "nxp,sa56004";
+				reg = <0x4d>;
+				vcc-supply = <&sb_3v3>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		/* IRQ_RTC_B -> IRQ08, active low */
+		interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&optee {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio4 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
new file mode 100644
index 0000000000..ea6a94b57a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -0,0 +1,1792 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree Include file for Layerscape-LX2160A family SoC.
+//
+// Copyright 2018-2020 NXP
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	compatible = "fsl,lx2160a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		rtc1 = &ftm_alarm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		// 8 clusters having 2 Cortex-A72 cores each
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster0_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x1>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster0_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu100: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x100>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster1_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x101>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster1_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu200: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x200>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster2_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu201: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x201>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster2_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu300: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x300>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster3_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu301: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x301>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster3_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu400: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x400>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 4>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster4_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu401: cpu@401 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x401>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 4>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster4_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu500: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x500>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 5>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster5_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu501: cpu@501 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x501>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 5>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster5_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu600: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x600>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 6>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster6_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu601: cpu@601 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x601>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 6>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster6_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu700: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x700>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 7>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster7_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu701: cpu@701 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x701>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 7>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster7_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster4_l2: l2-cache4 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster5_l2: l2-cache5 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster6_l2: l2-cache6 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster7_l2: l2-cache7 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cpu_pw15: cpu-pw15 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PW15";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <2000>;
+			exit-latency-us = <2000>;
+			min-residency-us = <6000>;
+		  };
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, // GIC Dist
+			<0x0 0x06200000 0 0x200000>, // GICR (RD_base +
+						     // SGI_base)
+			<0x0 0x0c0c0000 0 0x2000>, // GICC
+			<0x0 0x0c0d0000 0 0x1000>, // GICH
+			<0x0 0x0c0e0000 0 0x20000>; // GICV
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its: msi-controller@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	memory@80000000 {
+		// DRAM space - 1, size : 2 GB DRAM
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+	};
+
+	ddr1: memory-controller@1080000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1080000 0x0 0x1000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+	};
+
+	ddr2: memory-controller@1090000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1090000 0x0 0x1000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+	};
+
+	// One clock unit-sysclk node which bootloader require during DT fix-up
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>; // fixed up by bootloader
+		clock-output-names = "sysclk";
+	};
+
+	thermal-zones {
+		cluster6-7 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cluster6_7_alert: cluster6-7-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster6_7_crit: cluster6-7-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cluster6_7_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu200 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu201 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu300 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu301 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu400 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu401 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu500 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu501 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu600 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu601 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu700 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu701 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		ddr-cluster5 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				ddr-cluster5-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-cluster5-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wriop {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				wriop-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wriop-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		dce-qbman-hsio2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				dce-qbman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				dce-qbman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ccn-dpaa-tbu {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				ccn-dpaa-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ccn-dpaa-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster4-hsio3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 5>;
+
+			trips {
+				clust4-hsio3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				clust4-hsio3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster2-3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 6>;
+
+			trips {
+				cluster2-3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster2-3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+
+		serdes_1: phy@1ea0000 {
+			compatible = "fsl,lynx-28g";
+			reg = <0x0 0x1ea0000 0x0 0x1e30>;
+			#phy-cells = <1>;
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		clockgen: clock-controller@1300000 {
+			compatible = "fsl,lx2160a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dcfg: syscon@1e00000 {
+			compatible = "fsl,lx2160a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1028a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		isc: syscon@1f70000 {
+			compatible = "fsl,lx2160a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller@14 {
+				compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tmu-range = <0x800000e6 0x8001017d>;
+			fsl,tmu-calibration =
+				/* Calibration data group 1 */
+				<0x00000000 0x00000035
+				/* Calibration data group 2 */
+				0x00000001 0x00000154>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		i2c0: i2c@2000000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2020000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@2030000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@2040000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2040000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@2050000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2050000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@2060000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2060000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@2070000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2070000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		fspi: spi@20c0000 {
+			compatible = "nxp,lx2160a-fspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "fspi_base", "fspi_mmap";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "fspi_en", "fspi";
+			status = "disabled";
+		};
+
+		dspi0: spi@2100000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			status = "disabled";
+		};
+
+		esdhc0: esdhc@2140000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dma-coherent;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		esdhc1: esdhc@2150000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x2150000 0x0 0x10000>;
+			interrupts = <0 63 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dma-coherent;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			broken-cd;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		can0: can@2180000 {
+			compatible = "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_SYSCLK 0>;
+			clock-names = "ipg", "per";
+			fsl,clk-source = /bits/ 8 <0>;
+			status = "disabled";
+		};
+
+		can1: can@2190000 {
+			compatible = "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_SYSCLK 0>;
+			clock-names = "ipg", "per";
+			fsl,clk-source = /bits/ 8 <0>;
+			status = "disabled";
+		};
+
+		uart0: serial@21c0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21c0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		uart1: serial@21d0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21d0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		uart2: serial@21e0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21e0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		uart3: serial@21f0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21f0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog@23a0000 {
+			compatible = "arm,sbsa-gwdt";
+			reg = <0x0 0x23a0000 0 0x1000>,
+			      <0x0 0x2390000 0 0x1000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			timeout-sec = <30>;
+		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,lx2160a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb0: usb@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			usb3-lpm-capable;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		usb1: usb@3110000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			usb3-lpm-capable;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		sata0: sata@3200000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata1: sata@3210000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata2: sata@3220000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3220000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata3: sata@3230000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3230000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+			      <0x90 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <256>;
+			ppio-wins = <24>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie4: pcie@3700000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
+			      <0x98 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie5: pcie@3800000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03800000 0x0 0x00100000>, /* controller registers */
+			      <0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <256>;
+			ppio-wins = <24>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie6: pcie@3900000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03900000 0x0 0x00100000>, /* controller registers */
+			      <0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <14>;
+				     // global secure fault
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined secure
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     // global non-secure fault
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined non-secure
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     // performance counter interrupts 0-9
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     // per context interrupt, 64 interrupts
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+		};
+
+		console@8340020 {
+			compatible = "fsl,dpaa2-console";
+			reg = <0x00000000 0x08340020 0 0x2>;
+		};
+
+		ptp-timer@8b95000 {
+			compatible = "fsl,dpaa2-ptp";
+			reg = <0x0 0x8b95000 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			little-endian;
+			fsl,extts-fifo;
+		};
+
+		/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		pcs_mdio1: mdio@8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio2: mdio@8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs2: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio3: mdio@8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs3: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio4: mdio@8c13000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c13000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs4: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio5: mdio@8c17000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c17000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs5: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio6: mdio@8c1b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs6: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio7: mdio@8c1f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs7: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio8: mdio@8c23000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c23000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs8: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio9: mdio@8c27000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c27000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs9: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio10: mdio@8c2b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c2b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs10: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio11: mdio@8c2f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c2f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs11: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio12: mdio@8c33000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c33000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs12: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio13: mdio@8c37000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c37000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs13: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio14: mdio@8c3b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c3b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs14: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio15: mdio@8c3f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c3f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs15: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio16: mdio@8c43000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c43000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs16: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio17: mdio@8c47000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c47000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs17: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio18: mdio@8c4b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c4b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs18: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,
+			      <0x00000000 0x08340000 0 0x40000>;
+			msi-parent = <&its>;
+			/* iommu-map property is fixed up by u-boot */
+			iommu-map = <0 &smmu 0 0>;
+			dma-coherent;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			/*
+			 * Define the maximum number of MACs present on the SoC.
+			 */
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: ethernet@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x1>;
+					pcs-handle = <&pcs1>;
+				};
+
+				dpmac2: ethernet@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x2>;
+					pcs-handle = <&pcs2>;
+				};
+
+				dpmac3: ethernet@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x3>;
+					pcs-handle = <&pcs3>;
+				};
+
+				dpmac4: ethernet@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x4>;
+					pcs-handle = <&pcs4>;
+				};
+
+				dpmac5: ethernet@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x5>;
+					pcs-handle = <&pcs5>;
+				};
+
+				dpmac6: ethernet@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x6>;
+					pcs-handle = <&pcs6>;
+				};
+
+				dpmac7: ethernet@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x7>;
+					pcs-handle = <&pcs7>;
+				};
+
+				dpmac8: ethernet@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x8>;
+					pcs-handle = <&pcs8>;
+				};
+
+				dpmac9: ethernet@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x9>;
+					pcs-handle = <&pcs9>;
+				};
+
+				dpmac10: ethernet@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+					pcs-handle = <&pcs10>;
+				};
+
+				dpmac11: ethernet@b {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xb>;
+					pcs-handle = <&pcs11>;
+				};
+
+				dpmac12: ethernet@c {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xc>;
+					pcs-handle = <&pcs12>;
+				};
+
+				dpmac13: ethernet@d {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xd>;
+					pcs-handle = <&pcs13>;
+				};
+
+				dpmac14: ethernet@e {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xe>;
+					pcs-handle = <&pcs14>;
+				};
+
+				dpmac15: ethernet@f {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xf>;
+					pcs-handle = <&pcs15>;
+				};
+
+				dpmac16: ethernet@10 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x10>;
+					pcs-handle = <&pcs16>;
+				};
+
+				dpmac17: ethernet@11 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x11>;
+					pcs-handle = <&pcs17>;
+				};
+
+				dpmac18: ethernet@12 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x12>;
+					pcs-handle = <&pcs18>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
new file mode 100644
index 0000000000..9f5ff1ffe7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2162AQDS
+//
+// Copyright 2020 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2162AQDS";
+	compatible = "fsl,lx2162a-qds", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LTM4619-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mdio-mux-1 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 0>;
+		mdio-parent-bus = <&emdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* On-board RTL8211F PHY #1 RGMII1 */
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x1>;
+				eee-broken-1000t;
+			};
+		};
+
+		mdio@8 { /* On-board RTL8211F PHY #2 RGMII2 */
+			reg = <0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x2>;
+				eee-broken-1000t;
+			};
+		};
+
+		mdio@18 { /* Slot #1 */
+			reg = <0x18>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@19 { /* Slot #2 */
+			reg = <0x19>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1a { /* Slot #3 */
+			reg = <0x1a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1b { /* Slot #4 */
+			reg = <0x1b>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1c { /* Slot #5 */
+			reg = <0x1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1d { /* Slot #6 */
+			reg = <0x1d>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1e { /* Slot #7 */
+			reg = <0x1e>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1f { /* Slot #8 */
+			reg = <0x1f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mdio-mux-2 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 1>;
+		mdio-parent-bus = <&emdio2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* Slot #1 (secondary EMI) */
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1 { /* Slot #2 (secondary EMI) */
+			reg = <0x01>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@2 { /* Slot #3 (secondary EMI) */
+			reg = <0x02>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@3 { /* Slot #4 (secondary EMI) */
+			reg = <0x03>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@4 { /* Slot #5 (secondary EMI) */
+			reg = <0x04>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@5 { /* Slot #6 (secondary EMI) */
+			reg = <0x05>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@6 { /* Slot #7 (secondary EMI) */
+			reg = <0x06>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@7 { /* Slot #8 (secondary EMI) */
+			reg = <0x07>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dspi0 {
+	status = "okay";
+
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	dflash1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi2 {
+	status = "okay";
+
+	dflash2: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	fpga@66 {
+		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
+			     "simple-mfd";
+		reg = <0x66>;
+
+		mux: mux-controller {
+			compatible = "reg-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+					<0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ_RTC_B -> IRQ11_B(CPLD) -> IRQ11(CPU), active low */
+				interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&optee {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
new file mode 100644
index 0000000000..685d4294f4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC USBH2(ABCD) / USBH(3|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/* TODO: Audio Mixer */
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Apalis Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH4 SuperSpeed */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
new file mode 100644
index 0000000000..c6d51f1162
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		/* LED_4_GREEN / MXM3_188 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_4_RED / MXM3_178 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_GREEN / MXM3_152 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_RED / MXM3_156 */
+		led-4 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC_USBH(2|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/* TODO: Audio Mixer */
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>,
+		    <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>,
+		    <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>,
+		    <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>,
+		    <&pinctrl_qspi1a_gpios>, <&pinctrl_sata1_act>,
+		    <&pinctrl_sim0_gpios>, <&pinctrl_uart24_forceoff>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27	0x06000061>, /* LED_4_GREEN */
+			   <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29	0x06000061>, /* LED_4_RED */
+			   <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x06000061>, /* LED_5_GREEN */
+			   <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x06000061>; /* LED_5_RED */
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25		0x00000021>;
+	};
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03",
+			  "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07",
+			  "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11",
+			  "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15",
+			  "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19",
+			  "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23",
+			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
+			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
+			  "gpio5-31";
+	ngpios = <32>;
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Apalis Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH4 SuperSpeed */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
new file mode 100644
index 0000000000..40067ab8aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		/* LED_4_GREEN / MXM3_188 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_4_RED / MXM3_178 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_GREEN / MXM3_152 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_RED / MXM3_156 */
+		led-4 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		/* MMC1_PWR_CTRL */
+		gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+	};
+
+	reg_can1_supply: regulator-can1-supply {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "can1_supply";
+	};
+
+	reg_can2_supply: regulator-can2-supply {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sata1_act>;
+		gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "can2_supply";
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC_USBH(2|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/* TODO: Audio Mixer */
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	xceiver-supply = <&reg_can1_supply>;
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	xceiver-supply = <&reg_can2_supply>;
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>,
+		    <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>,
+		    <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>,
+		    <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>,
+		    <&pinctrl_qspi1a_gpios>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_uart24_forceoff>, <&pinctrl_usdhc1_gpios>;
+
+	/* PMIC MMC1 power-switch */
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19	0x00000021>; /* MXM3_148, PMIC */
+	};
+
+	/* FlexCAN PMIC */
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021>; /* MXM3_158, PMIC */
+	};
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27	0x06000061>, /* LED_4_GREEN */
+			   <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29	0x06000061>, /* LED_4_RED */
+			   <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x06000061>, /* LED_5_GREEN */
+			   <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x06000061>; /* LED_5_RED */
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25		0x00000021>;
+	};
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03",
+			  "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07",
+			  "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11",
+			  "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15",
+			  "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19",
+			  "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23",
+			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
+			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
+			  "gpio5-31";
+	ngpios = <32>;
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Apalis Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH4 SuperSpeed */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	cap-power-off-card;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
new file mode 100644
index 0000000000..0878a15acc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -0,0 +1,1481 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/* Apalis BKL1 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bkl_on>;
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */
+		/* TODO: hook-up to Apalis BKL1_PWM */
+		status = "disabled";
+	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio8>;
+		gpios = <&lsio_gpio3 28 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <	 0 0
+				      3000 1>;
+	};
+
+	/* TODO: LVDS Panel */
+
+	/* TODO: Shared PCIe/SATA Reference Clock */
+
+	/* TODO: PCIe Wi-Fi Reference Clock */
+
+	/*
+	 * Power management bus used to control LDO1OUT of the
+	 * second PMIC PF8100. This is used for controlling voltage levels of
+	 * typespecific RGMII signals and Apalis UART2_RTS UART2_CTS.
+	 *
+	 * IMX_SC_R_BOARD_R1 for 3.3V
+	 * IMX_SC_R_BOARD_R2 for 1.8V
+	 * IMX_SC_R_BOARD_R3 for 2.5V
+	 * Note that for 2.5V operation the pad muxing needs to be changed,
+	 * compare with PSW_OVR field of IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD.
+	 *
+	 * those power domains are mutually exclusive.
+	 */
+	reg_ext_rgmii: regulator-ext-rgmii {
+		compatible = "regulator-fixed";
+		power-domains = <&pd IMX_SC_R_BOARD_R1>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_EXT_RGMII (LDO1)";
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AUDIO";
+	};
+
+	reg_module_wifi: regulator-module-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pdn>;
+		gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "wifi_pwrdn_fake_regulator";
+		regulator-settling-time-us = <100>;
+	};
+
+	reg_pcie_switch: regulator-pcie-switch {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio7>;
+		gpio = <&lsio_gpio3 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
+		startup-delay-us = <100000>;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_en>;
+		/* Apalis USBH_EN */
+		gpio = <&lsio_gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-host-vbus";
+	};
+
+	reg_usb_hsic: regulator-usb-hsic {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "usb-hsic-dummy";
+	};
+
+	reg_usb_phy: regulator-usb-hsic1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "usb-phy-dummy";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder1_boot: encoder1-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		encoder2_boot: encoder2-boot@86200000 {
+			reg = <0 0x86200000 0 0x200000>;
+			no-map;
+		};
+
+		/*
+		 * reserved-memory layout
+		 * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4
+		 * Shouldn't be used at A core and Linux side.
+		 *
+		 */
+		m4_reserved: m4@88000000 {
+			reg = <0 0x88000000 0 0x8000000>;
+			no-map;
+		};
+
+		rpmsg_reserved: rpmsg@90200000 {
+			reg = <0 0x90200000 0 0x200000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x200000>;
+			no-map;
+		};
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder1_rpc: encoder1-rpc@94400000 {
+			reg = <0 0x94400000 0 0x700000>;
+			no-map;
+		};
+
+		encoder2_rpc: encoder2-rpc@94b00000 {
+			reg = <0 0x94b00000 0 0x700000>;
+			no-map;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+			size = <0 0x3c000000>;
+		};
+	};
+
+	/* TODO: Apalis Analogue Audio */
+
+	/* TODO: HDMI Audio */
+
+	/* TODO: Apalis SPDIF1 */
+
+	touchscreen: touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle", "default";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+		pinctrl-1 = <&pinctrl_adc1>, <&pinctrl_touchctrl_gpios>;
+		io-channels = <&adc1 2>, <&adc1 1>,
+			      <&adc1 0>, <&adc1 3>;
+		vf50-ts-min-pressure = <200>;
+		xp-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&lsio_gpio2 5 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&lsio_gpio2 17 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&lsio_gpio2 21 GPIO_ACTIVE_HIGH>;
+		/*
+		 * NOTE: you must remove the pinctrl-adc1 from the adc1
+		 * node below to use the touchscreen
+		 */
+		status = "disabled";
+	};
+
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+};
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* Apalis ETH1 */
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <7>;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reset-assert-us = <2>;
+			reset-deassert-us = <2>;
+			reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>;
+			reset-names = "phy-reset";
+		};
+	};
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+/* Apalis CAN3 (optional) */
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+};
+
+/* TODO: Apalis HDMI1 */
+
+/* On-module I2C */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* TODO: Audio Codec */
+
+	/* USB3503A */
+	usb-hub@8 {
+		compatible = "smsc,usb3503a";
+		reg = <0x08>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503a>;
+		connect-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+		intn-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
+		refclk-frequency = <25000000>;
+		reset-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+
+	atmel_mxt_ts: touch@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;		/* Apalis GPIO5 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>;
+		reset-gpios = <&lsio_gpio4 2 GPIO_ACTIVE_LOW>;	/* Apalis GPIO6 */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+/* TODO: Apalis LVDS1 */
+
+/* Apalis SPI1 */
+&lpspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>;
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_135",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_275",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_124",
+			  "MXM3_122",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "",
+			  "",
+			  "MXM3_4",
+			  "MXM3_211",
+			  "MXM3_209",
+			  "MXM3_2",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_112",
+			  "MXM3_118",
+			  "MXM3_114",
+			  "MXM3_116";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_286",
+			  "",
+			  "MXM3_87",
+			  "MXM3_99",
+			  "MXM3_138",
+			  "MXM3_140",
+			  "MXM3_239",
+			  "",
+			  "MXM3_281",
+			  "MXM3_283",
+			  "MXM3_126",
+			  "MXM3_132",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_173",
+			  "MXM3_175",
+			  "MXM3_123";
+
+	hdmi-ctrl-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_ctrl>;
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_HIGH>;
+		line-name = "CONNECTOR_IS_HDMI";
+		/* Set signals depending on HDP device type, 0 DP, 1 HDMI */
+		output-high;
+	};
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_198",
+			  "MXM3_35",
+			  "MXM3_164",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_217",
+			  "MXM3_215",
+			  "",
+			  "",
+			  "MXM3_193",
+			  "MXM3_194",
+			  "MXM3_37",
+			  "",
+			  "MXM3_271",
+			  "MXM3_273",
+			  "MXM3_195",
+			  "MXM3_197",
+			  "MXM3_177",
+			  "MXM3_179",
+			  "MXM3_181",
+			  "MXM3_183",
+			  "MXM3_185",
+			  "MXM3_187";
+
+	/*
+	 * Add GPIO2_20 as a wakeup source:
+	 * Pin:  101	SC_P_SPI3_CS0 (MXM3_37/WAKE1_MICO)
+	 * Type: 5	SC_PAD_WAKEUP_FALL_EDGE
+	 * Line: 20
+	 */
+	pad-wakeup = <IMX8QM_SPI3_CS0 5 20>;
+	pad-wakeup-num = <1>;
+
+	pcie-wifi-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		line-name = "PCIE_WIFI_CLK";
+		output-high;
+	};
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "MXM3_191",
+			  "",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_200",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_204",
+			  "MXM3_196",
+			  "",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "MXM3_305",
+			  "MXM3_307",
+			  "MXM3_309",
+			  "MXM3_311",
+			  "MXM3_315",
+			  "MXM3_317",
+			  "MXM3_319",
+			  "MXM3_321",
+			  "MXM3_15/GPIO7",
+			  "MXM3_63",
+			  "MXM3_17/GPIO8",
+			  "MXM3_12",
+			  "MXM3_14",
+			  "MXM3_16";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "MXM3_18",
+			  "MXM3_11/GPIO5",
+			  "MXM3_13/GPIO6",
+			  "MXM3_274",
+			  "MXM3_84",
+			  "MXM3_262",
+			  "MXM3_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "",
+			  "",
+			  "",
+			  "MXM3_269",
+			  "MXM3_251",
+			  "MXM3_253",
+			  "MXM3_295",
+			  "MXM3_299",
+			  "MXM3_301",
+			  "MXM3_297",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287";
+
+	/* Enable pcie root / sata ref clock unconditionally */
+	pcie-sata-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		line-name = "PCIE_SATA_CLK";
+		output-high;
+	};
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_150",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_144",
+			  "MXM3_146",
+			  "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_159",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_186",
+			  "MXM3_188",
+			  "MXM3_176",
+			  "MXM3_178";
+};
+
+&lsio_gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_261",
+			  "MXM3_263",
+			  "MXM3_259",
+			  "MXM3_257",
+			  "MXM3_255",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_265",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_243";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	#pwm-cells = <3>;
+};
+
+/* Messaging Units */
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&mu2_m0 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: On-module Wi-Fi */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Thermal Zones */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* TODO: Apalis USBH4 */
+
+/* Apalis USBO1 */
+&usbphy1 {
+	phy-3p0-supply = <&reg_usb_phy>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	adp-disable;
+	hnp-disable;
+	over-current-active-low;
+	power-active-high;
+	srp-disable;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>,
+		    <&pinctrl_usdhc2_8bit>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>,
+		    <&pinctrl_usdhc2_8bit_100mhz>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>,
+		    <&pinctrl_usdhc2_8bit_200mhz>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>,
+		    <&pinctrl_usdhc2_8bit_sleep>,
+		    <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <8>;
+	cd-gpios = <&lsio_gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */
+	no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_sd1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_sd1_cd>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */
+	no-1-8-v;
+};
+
+/* Video Processing Unit */
+&vpu {
+	compatible = "nxp,imx8qm-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	reg = <0x2d080000 0x10000>;
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	reg = <0x2d090000 0x10000>;
+	memory-region = <&encoder1_boot>, <&encoder1_rpc>;
+	status = "okay";
+};
+
+&vpu_core2 {
+	reg = <0x2d0a0000 0x10000>;
+	memory-region = <&encoder2_boot>, <&encoder2_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_keys>,
+		    <&pinctrl_gpio_usbh_oc_n>, <&pinctrl_lpuart1ctrl>,
+		    <&pinctrl_lvds0_i2c0_gpio>, <&pinctrl_lvds1_i2c0_gpios>,
+		    <&pinctrl_mipi_dsi_0_1_en>, <&pinctrl_mipi_dsi1_gpios>,
+		    <&pinctrl_mlb_gpios>, <&pinctrl_qspi1a_gpios>,
+		    <&pinctrl_sata1_act>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	/* Apalis AN1_ADC */
+	pinctrl_adc0: adc0grp {
+		fsl,pins = /* Apalis AN1_ADC0 */
+			   <IMX8QM_ADC_IN0_DMA_ADC0_IN0				0xc0000060>,
+			   /* Apalis AN1_ADC1 */
+			   <IMX8QM_ADC_IN1_DMA_ADC0_IN1				0xc0000060>,
+			   /* Apalis AN1_ADC2 */
+			   <IMX8QM_ADC_IN2_DMA_ADC0_IN2				0xc0000060>,
+			   /* Apalis AN1_TSWIP_ADC3 */
+			   <IMX8QM_ADC_IN3_DMA_ADC0_IN3				0xc0000060>;
+	};
+
+	/* Apalis AN1_TS */
+	pinctrl_adc1: adc1grp {
+		fsl,pins = /* Apalis AN1_TSPX */
+			   <IMX8QM_ADC_IN4_DMA_ADC1_IN0				0xc0000060>,
+			   /* Apalis AN1_TSMX */
+			   <IMX8QM_ADC_IN5_DMA_ADC1_IN1				0xc0000060>,
+			   /* Apalis AN1_TSPY */
+			   <IMX8QM_ADC_IN6_DMA_ADC1_IN2				0xc0000060>,
+			   /* Apalis AN1_TSMY */
+			   <IMX8QM_ADC_IN7_DMA_ADC1_IN3				0xc0000060>;
+	};
+
+	/* Apalis CAM1 */
+	pinctrl_cam1_gpios: cam1gpiosgrp {
+		fsl,pins = /* Apalis CAM1_D7 */
+			   <IMX8QM_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20		0x00000021>,
+			   /* Apalis CAM1_D6 */
+			   <IMX8QM_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21		0x00000021>,
+			   /* Apalis CAM1_D5 */
+			   <IMX8QM_ESAI0_TX0_LSIO_GPIO2_IO26			0x00000021>,
+			   /* Apalis CAM1_D4 */
+			   <IMX8QM_ESAI0_TX1_LSIO_GPIO2_IO27			0x00000021>,
+			   /* Apalis CAM1_D3 */
+			   <IMX8QM_ESAI0_TX2_RX3_LSIO_GPIO2_IO28		0x00000021>,
+			   /* Apalis CAM1_D2 */
+			   <IMX8QM_ESAI0_TX3_RX2_LSIO_GPIO2_IO29		0x00000021>,
+			   /* Apalis CAM1_D1 */
+			   <IMX8QM_ESAI0_TX4_RX1_LSIO_GPIO2_IO30		0x00000021>,
+			   /* Apalis CAM1_D0 */
+			   <IMX8QM_ESAI0_TX5_RX0_LSIO_GPIO2_IO31		0x00000021>,
+			   /* Apalis CAM1_PCLK */
+			   <IMX8QM_MCLK_IN0_LSIO_GPIO3_IO00			0x00000021>,
+			   /* Apalis CAM1_MCLK */
+			   <IMX8QM_SPI3_SDO_LSIO_GPIO2_IO18			0x00000021>,
+			   /* Apalis CAM1_VSYNC */
+			   <IMX8QM_ESAI0_SCKR_LSIO_GPIO2_IO24			0x00000021>,
+			   /* Apalis CAM1_HSYNC */
+			   <IMX8QM_ESAI0_SCKT_LSIO_GPIO2_IO25			0x00000021>;
+	};
+
+	/* Apalis DAP1 */
+	pinctrl_dap1_gpios: dap1gpiosgrp {
+		fsl,pins = /* Apalis DAP1_MCLK */
+			   <IMX8QM_SPI3_SDI_LSIO_GPIO2_IO19			0x00000021>,
+			   /* Apalis DAP1_D_OUT */
+			   <IMX8QM_SAI1_RXC_LSIO_GPIO3_IO12			0x00000021>,
+			   /* Apalis DAP1_RESET */
+			   <IMX8QM_ESAI1_SCKT_LSIO_GPIO2_IO07			0x00000021>,
+			   /* Apalis DAP1_BIT_CLK */
+			   <IMX8QM_SPI0_CS1_LSIO_GPIO3_IO06			0x00000021>,
+			   /* Apalis DAP1_D_IN */
+			   <IMX8QM_SAI1_RXFS_LSIO_GPIO3_IO14			0x00000021>,
+			   /* Apalis DAP1_SYNC */
+			   <IMX8QM_SPI2_CS1_LSIO_GPIO3_IO11			0x00000021>,
+			   /* On-module Wi-Fi_I2S_EN# */
+			   <IMX8QM_ESAI1_TX5_RX0_LSIO_GPIO2_IO13		0x00000021>;
+	};
+
+	/* Apalis LCD1_G1+2 */
+	pinctrl_esai0_gpios: esai0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G1 */
+			   <IMX8QM_ESAI0_FSR_LSIO_GPIO2_IO22			0x00000021>,
+			   /* Apalis LCD1_G2 */
+			   <IMX8QM_ESAI0_FST_LSIO_GPIO2_IO23			0x00000021>;
+	};
+
+	/* On-module Gigabit Ethernet PHY Micrel KSZ9031 for Apalis GLAN */
+	pinctrl_fec1: fec1grp {
+		fsl,pins = /* Use pads in 3.3V mode */
+			   <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+			   <IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020>,
+			   <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO				0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC			0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC			0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020>,
+			   <IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M	0x06000020>,
+			   /* On-module ETH_RESET# */
+			   <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x06000020>,
+			   /* On-module ETH_INT# */
+			   <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29			0x04000060>;
+	};
+
+	pinctrl_fec1_sleep: fec1-sleepgrp {
+		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD		0x000014a0>,
+			   <IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14			0x04000040>,
+			   <IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13			0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09		0x04000040>,
+			   <IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15	0x04000040>,
+			   <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11			0x06000020>,
+			   <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29		0x04000040>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_fec2_gpios: fec2gpiosgrp {
+		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD		0x000014a0>,
+			   /* Apalis LCD1_R1 */
+			   <IMX8QM_ENET1_MDC_LSIO_GPIO4_IO18			0x00000021>,
+			   /* Apalis LCD1_R0 */
+			   <IMX8QM_ENET1_MDIO_LSIO_GPIO4_IO17			0x00000021>,
+			   /* Apalis LCD1_G0 */
+			   <IMX8QM_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16	0x00000021>,
+			   /* Apalis LCD1_R7 */
+			   <IMX8QM_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17		0x00000021>,
+			   /* Apalis LCD1_DE */
+			   <IMX8QM_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18		0x00000021>,
+			   /* Apalis LCD1_HSYNC */
+			   <IMX8QM_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19		0x00000021>,
+			   /* Apalis LCD1_VSYNC */
+			   <IMX8QM_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20		0x00000021>,
+			   /* Apalis LCD1_PCLK */
+			   <IMX8QM_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21		0x00000021>,
+			   /* Apalis LCD1_R6 */
+			   <IMX8QM_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11		0x00000021>,
+			   /* Apalis LCD1_R5 */
+			   <IMX8QM_ENET1_RGMII_TXC_LSIO_GPIO6_IO10		0x00000021>,
+			   /* Apalis LCD1_R4 */
+			   <IMX8QM_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12		0x00000021>,
+			   /* Apalis LCD1_R3 */
+			   <IMX8QM_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13		0x00000021>,
+			   /* Apalis LCD1_R2 */
+			   <IMX8QM_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14		0x00000021>;
+	};
+
+	/* Apalis CAN1 */
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX			0x00000021>;
+	};
+
+	/* Apalis CAN2 */
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX			0x00000021>;
+	};
+
+	/* Apalis CAN3 (optional) */
+	pinctrl_flexcan3: flexcan2grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX			0x00000021>;
+	};
+
+	/* Apalis GPIO1 */
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <IMX8QM_M40_GPIO0_00_LSIO_GPIO0_IO08			0x06000021>;
+	};
+
+	/* Apalis GPIO2 */
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <IMX8QM_M40_GPIO0_01_LSIO_GPIO0_IO09			0x06000021>;
+	};
+
+	/* Apalis GPIO3 */
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <IMX8QM_M41_GPIO0_00_LSIO_GPIO0_IO12			0x06000021>;
+	};
+
+	/* Apalis GPIO4 */
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <IMX8QM_M41_GPIO0_01_LSIO_GPIO0_IO13			0x06000021>;
+	};
+
+	/* Apalis GPIO5 */
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_RX_LSIO_GPIO4_IO01			0x06000021>;
+	};
+
+	/* Apalis GPIO6 */
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_TX_LSIO_GPIO4_IO02			0x00000021>;
+	};
+
+	/* Apalis GPIO7 */
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <IMX8QM_MLB_SIG_LSIO_GPIO3_IO26			0x00000021>;
+	};
+
+	/* Apalis GPIO8 */
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <IMX8QM_MLB_DATA_LSIO_GPIO3_IO28			0x00000021>;
+	};
+
+	/* Apalis BKL1_ON */
+	pinctrl_gpio_bkl_on: gpiobklongrp {
+		fsl,pins = <IMX8QM_LVDS0_GPIO00_LSIO_GPIO1_IO04			0x00000021>;
+	};
+
+	/* Apalis WAKE1_MICO */
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <IMX8QM_SPI3_CS0_LSIO_GPIO2_IO20			0x06700021>;
+	};
+
+	/* Apalis USBH_OC# */
+	pinctrl_gpio_usbh_oc_n: gpiousbhocngrp {
+		fsl,pins = <IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06			0x04000021>;
+	};
+
+	/* On-module HDMI_CTRL */
+	pinctrl_hdmi_ctrl: hdmictrlgrp {
+		fsl,pins = <IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30		0x00000061>;
+	};
+
+	/* On-module I2C */
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <IMX8QM_GPT0_CLK_DMA_I2C1_SCL			0x04000020>,
+			   <IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA			0x04000020>;
+	};
+
+	/* Apalis I2C1 */
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <IMX8QM_GPT1_CLK_DMA_I2C2_SCL			0x04000020>,
+			   <IMX8QM_GPT1_CAPTURE_DMA_I2C2_SDA			0x04000020>;
+	};
+
+	/* Apalis I2C3 (CAM) */
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <IMX8QM_SIM0_PD_DMA_I2C3_SCL				0x04000020>,
+			   <IMX8QM_SIM0_POWER_EN_DMA_I2C3_SDA			0x04000020>;
+	};
+
+	/* Apalis SPI1 */
+	pinctrl_lpspi0: lpspi0grp {
+		fsl,pins = <IMX8QM_SPI0_SCK_DMA_SPI0_SCK			0x0600004c>,
+			   <IMX8QM_SPI0_SDO_DMA_SPI0_SDO			0x0600004c>,
+			   <IMX8QM_SPI0_SDI_DMA_SPI0_SDI			0x0600004c>,
+			   <IMX8QM_SPI0_CS0_LSIO_GPIO3_IO05			0x0600004c>;
+	};
+
+	/* Apalis SPI2 */
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <IMX8QM_SPI2_SCK_DMA_SPI2_SCK			0x0600004c>,
+			   <IMX8QM_SPI2_SDO_DMA_SPI2_SDO			0x0600004c>,
+			   <IMX8QM_SPI2_SDI_DMA_SPI2_SDI			0x0600004c>,
+			   <IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10			0x0600004c>;
+	};
+
+	/* Apalis UART3 */
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QM_UART0_RX_DMA_UART0_RX			0x06000020>,
+			   <IMX8QM_UART0_TX_DMA_UART0_TX			0x06000020>;
+	};
+
+	/* Apalis UART1 */
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX8QM_UART1_RX_DMA_UART1_RX			0x06000020>,
+			   <IMX8QM_UART1_TX_DMA_UART1_TX			0x06000020>,
+			   <IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B			0x06000020>,
+			   <IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B			0x06000020>;
+	};
+
+	/* Apalis UART1 */
+	pinctrl_lpuart1ctrl: lpuart1ctrlgrp {
+		fsl,pins = /* Apalis UART1_DTR */
+			   <IMX8QM_M40_I2C0_SCL_LSIO_GPIO0_IO06			0x00000021>,
+			   /* Apalis UART1_DSR */
+			   <IMX8QM_M40_I2C0_SDA_LSIO_GPIO0_IO07			0x00000021>,
+			   /* Apalis UART1_DCD */
+			   <IMX8QM_M41_I2C0_SCL_LSIO_GPIO0_IO10			0x00000021>,
+			   /* Apalis UART1_RI */
+			   <IMX8QM_M41_I2C0_SDA_LSIO_GPIO0_IO11			0x00000021>;
+	};
+
+	/* Apalis UART4 */
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <IMX8QM_LVDS0_I2C1_SCL_DMA_UART2_TX			0x06000020>,
+			   <IMX8QM_LVDS0_I2C1_SDA_DMA_UART2_RX			0x06000020>;
+	};
+
+	/* Apalis UART2 */
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QM_LVDS1_I2C1_SCL_DMA_UART3_TX			0x06000020>,
+			   <IMX8QM_LVDS1_I2C1_SDA_DMA_UART3_RX			0x06000020>,
+			   <IMX8QM_ENET1_RGMII_TXD3_DMA_UART3_RTS_B		0x06000020>,
+			   <IMX8QM_ENET1_RGMII_RXC_DMA_UART3_CTS_B		0x06000020>;
+	};
+
+	/* Apalis TS_2 */
+	pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpiogrp {
+		fsl,pins = <IMX8QM_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06		0x00000021>;
+	};
+
+	/* Apalis LCD1_G6+7 */
+	pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G6 */
+			   <IMX8QM_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12		0x00000021>,
+			   /* Apalis LCD1_G7 */
+			   <IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13		0x00000021>;
+	};
+
+	/* Apalis TS_3 */
+	pinctrl_mipi_dsi_0_1_en: mipidsi0-1engrp {
+		fsl,pins = <IMX8QM_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07		0x00000021>;
+	};
+
+	/* Apalis TS_4 */
+	pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp {
+		fsl,pins = <IMX8QM_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22		0x00000021>;
+	};
+
+	/* Apalis TS_1 */
+	pinctrl_mlb_gpios: mlbgpiosgrp {
+		fsl,pins = <IMX8QM_MLB_CLK_LSIO_GPIO3_IO27			0x00000021>;
+	};
+
+	/* Apalis MMC1_CD# */
+	pinctrl_mmc1_cd: mmc1cdgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09			0x00000021>;
+	};
+
+	pinctrl_mmc1_cd_sleep: mmc1cdsleepgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09			0x04000021>;
+	};
+
+	/* On-module PCIe_Wi-Fi */
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QM_PCIE_CTRL1_CLKREQ_B_LSIO_GPIO4_IO30		0x00000021>,
+			   <IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31		0x00000021>,
+			   <IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00		0x00000021>;
+	};
+
+	/* On-module PCIe_CLK_EN1 */
+	pinctrl_pcie_sata_refclk: pciesatarefclkgrp {
+		fsl,pins = <IMX8QM_USDHC2_WP_LSIO_GPIO4_IO11			0x00000021>;
+	};
+
+	/* On-module PCIe_CLK_EN2 */
+	pinctrl_pcie_wifi_refclk: pciewifirefclkgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX3_RX2_LSIO_GPIO2_IO11		0x00000021>;
+	};
+
+	/* Apalis PWM3 */
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <IMX8QM_UART0_RTS_B_LSIO_PWM0_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM4 */
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <IMX8QM_UART0_CTS_B_LSIO_PWM1_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM1 */
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <IMX8QM_GPT1_COMPARE_LSIO_PWM2_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM2 */
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <IMX8QM_GPT0_COMPARE_LSIO_PWM3_OUT			0x00000020>;
+	};
+
+	/* Apalis BKL1_PWM */
+	pinctrl_pwm_bkl: pwmbklgrp {
+		fsl,pins = <IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT			0x00000020>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_qspi1a_gpios: qspi1agpiosgrp {
+		fsl,pins = /* Apalis LCD1_B0 */
+			   <IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26			0x00000021>,
+			   /* Apalis LCD1_B1 */
+			   <IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25			0x00000021>,
+			   /* Apalis LCD1_B2 */
+			   <IMX8QM_QSPI1A_DATA2_LSIO_GPIO4_IO24			0x00000021>,
+			   /* Apalis LCD1_B3 */
+			   <IMX8QM_QSPI1A_DATA3_LSIO_GPIO4_IO23			0x00000021>,
+			   /* Apalis LCD1_B5 */
+			   <IMX8QM_QSPI1A_DQS_LSIO_GPIO4_IO22			0x00000021>,
+			   /* Apalis LCD1_B7 */
+			   <IMX8QM_QSPI1A_SCLK_LSIO_GPIO4_IO21			0x00000021>,
+			   /* Apalis LCD1_B4 */
+			   <IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19			0x00000021>,
+			   /* Apalis LCD1_B6 */
+			   <IMX8QM_QSPI1A_SS1_B_LSIO_GPIO4_IO20			0x00000021>;
+	};
+
+	/* On-module RESET_MOCI#_DRV */
+	pinctrl_reset_moci: resetmocigrp {
+		fsl,pins = <IMX8QM_SCU_GPIO0_02_LSIO_GPIO0_IO30			0x00000021>;
+	};
+
+	/* On-module I2S SGTL5000 for Apalis Analogue Audio */
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QM_SAI1_TXD_AUD_SAI1_TXD			0xc600006c>,
+			   <IMX8QM_SAI1_RXD_AUD_SAI1_RXD			0xc600004c>,
+			   <IMX8QM_SAI1_TXC_AUD_SAI1_TXC			0xc600004c>,
+			   <IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS			0xc600004c>;
+	};
+
+	/* Apalis SATA1_ACT# */
+	pinctrl_sata1_act: sata1actgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX0_LSIO_GPIO2_IO08			0x00000021>;
+	};
+
+	/* Apalis SD1_CD# */
+	pinctrl_sd1_cd: sd1cdgrp {
+		fsl,pins = <IMX8QM_USDHC2_CD_B_LSIO_GPIO4_IO12			0x00000021>;
+	};
+
+	/* On-module I2S SGTL5000 SYS_MCLK */
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0			0xc600004c>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_sim0_gpios: sim0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G5 */
+			   <IMX8QM_SIM0_CLK_LSIO_GPIO0_IO00			0x00000021>,
+			   /* Apalis LCD1_G3 */
+			   <IMX8QM_SIM0_GPIO0_00_LSIO_GPIO0_IO05		0x00000021>,
+			   /* Apalis TS_5 */
+			   <IMX8QM_SIM0_IO_LSIO_GPIO0_IO02			0x00000021>,
+			   /* Apalis LCD1_G4 */
+			   <IMX8QM_SIM0_RST_LSIO_GPIO0_IO01			0x00000021>;
+	};
+
+	/* Apalis SPDIF */
+	pinctrl_spdif0: spdif0grp {
+		fsl,pins = <IMX8QM_SPDIF0_TX_AUD_SPDIF0_TX			0xc6000040>,
+			   <IMX8QM_SPDIF0_RX_AUD_SPDIF0_RX			0xc6000040>;
+	};
+
+	pinctrl_touchctrl_gpios: touchctrlgpiosgrp {
+		fsl,pins = <IMX8QM_ESAI1_FSR_LSIO_GPIO2_IO04			0x00000021>,
+			   <IMX8QM_ESAI1_FST_LSIO_GPIO2_IO05			0x00000041>,
+			   <IMX8QM_SPI3_SCK_LSIO_GPIO2_IO17			0x00000021>,
+			   <IMX8QM_SPI3_CS1_LSIO_GPIO2_IO21			0x00000041>;
+	};
+
+	pinctrl_touchctrl_idle: touchctrlidlegrp {
+		fsl,pins = <IMX8QM_ADC_IN4_LSIO_GPIO3_IO22			0x00000021>,
+			   <IMX8QM_ADC_IN5_LSIO_GPIO3_IO23			0x00000021>,
+			   <IMX8QM_ADC_IN6_LSIO_GPIO3_IO24			0x00000021>,
+			   <IMX8QM_ADC_IN7_LSIO_GPIO3_IO25			0x00000021>;
+	};
+
+	/* On-module USB HSIC HUB (active) */
+	pinctrl_usb_hsic_active: usbh1activegrp {
+		fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA		0x000000cf>,
+			   <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE	0x000000ff>;
+	};
+
+	/* On-module USB HSIC HUB (idle) */
+	pinctrl_usb_hsic_idle: usbh1idlegrp {
+		fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA		0x000000cf>,
+			   <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE	0x000000cf>;
+	};
+
+	/* On-module USB HSIC HUB */
+	pinctrl_usb3503a: usb3503agrp {
+		fsl,pins = /* On-module HSIC_HUB_CONNECT */
+			   <IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31			0x00000041>,
+			   /* On-module HSIC_INT_N */
+			   <IMX8QM_SCU_GPIO0_05_LSIO_GPIO1_IO01			0x00000021>,
+			   /* On-module HSIC_RESET_N */
+			   <IMX8QM_SCU_GPIO0_06_LSIO_GPIO1_IO02			0x00000041>;
+	};
+
+	/* Apalis USBH_EN */
+	pinctrl_usbh_en: usbhengrp {
+		fsl,pins = <IMX8QM_USB_SS3_TC1_LSIO_GPIO4_IO04			0x00000021>;
+	};
+
+	/* Apalis USBO1 */
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = /* Apalis USBO1_EN */
+			   <IMX8QM_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021>,
+			   /* Apalis USBO1_OC# */
+			   <IMX8QM_USB_SS3_TC2_CONN_USB_OTG1_OC			0x04000021>;
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000041>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000021>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000040>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000020>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000020>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000020>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000020>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000020>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000020>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000020>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000020>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000020>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000040>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000020>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000040>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000020>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000020>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000020>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000020>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000020>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000020>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000020>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000020>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000020>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000040>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000020>;
+	};
+
+	/* Apalis TS_6 */
+	pinctrl_usdhc1_gpios: usdhc1gpiosgrp {
+		fsl,pins = <IMX8QM_USDHC1_STROBE_LSIO_GPIO5_IO23		0x00000021>;
+	};
+
+	/* Apalis MMC1 */
+	pinctrl_usdhc2_4bit: usdhc2grp4bitgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000021>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000021>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000021>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_4bit_100mhz: usdhc2-4bit100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000040>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000020>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000020>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000020>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000020>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000020>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_4bit_200mhz: usdhc2-4bit200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000040>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000020>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000020>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000020>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000020>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000020>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit: usdhc2grp8bitgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000021>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000021>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000021>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit_100mhz: usdhc2-8bit100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000020>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000020>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000020>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000020>;
+	};
+
+	pinctrl_usdhc2_8bit_200mhz: usdhc2-8bit200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000020>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000020>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000020>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000020>;
+	};
+
+	pinctrl_usdhc2_4bit_sleep: usdhc2-4bitsleepgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x04000061>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x04000061>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x04000061>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x04000061>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x04000061>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x04000061>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit_sleep: usdhc2-8bitsleepgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x04000061>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x04000061>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x04000061>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x04000061>;
+	};
+
+	/* Apalis SD1 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_wifi: wifigrp {
+		fsl,pins = /* On-module Wi-Fi_SUSCLK_32k */
+			   <IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x06000021>,
+			   /* On-module Wi-Fi_PCIE_W_DISABLE */
+			   <IMX8QM_MIPI_CSI0_MCLK_OUT_LSIO_GPIO1_IO24		0x06000021>;
+	};
+
+	pinctrl_wifi_pdn: wifipdngrp {
+		fsl,pins = /* On-module Wi-Fi_POWER_DOWN */
+			   <IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28		0x06000021>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
new file mode 100644
index 0000000000..9386d1a59e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include "imx8-ss-audio.dtsi"
+#include "imx8-ss-dma.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
new file mode 100644
index 0000000000..6c8d75ef92
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+audio_subsys: bus@59000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x59000000 0x0 0x59000000 0x1000000>;
+
+	audio_ipg_clk: clock-audio-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "audio_ipg_clk";
+	};
+
+	dsp_lpcg: clock-controller@59580000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59580000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>,
+			 <&audio_ipg_clk>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_7>;
+		clock-output-names = "dsp_lpcg_adb_clk",
+				     "dsp_lpcg_ipg_clk",
+				     "dsp_lpcg_core_clk";
+		power-domains = <&pd IMX_SC_R_DSP>;
+	};
+
+	dsp_ram_lpcg: clock-controller@59590000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59590000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "dsp_ram_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_DSP_RAM>;
+	};
+
+	dsp: dsp@596e8000 {
+		compatible = "fsl,imx8qxp-dsp";
+		reg = <0x596e8000 0x88000>;
+		clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
+			 <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
+			 <&dsp_lpcg IMX_LPCG_CLK_7>;
+		clock-names = "ipg", "ocram", "core";
+		power-domains = <&pd IMX_SC_R_MU_13A>,
+			<&pd IMX_SC_R_MU_13B>,
+			<&pd IMX_SC_R_DSP>,
+			<&pd IMX_SC_R_DSP_RAM>;
+		mbox-names = "txdb0", "txdb1",
+			"rxdb0", "rxdb1";
+		mboxes = <&lsio_mu13 2 0>,
+			<&lsio_mu13 2 1>,
+			<&lsio_mu13 3 0>,
+			<&lsio_mu13 3 1>;
+		memory-region = <&dsp_reserved>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
new file mode 100644
index 0000000000..fc1a5d3438
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+conn_subsys: bus@5b000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
+
+	conn_axi_clk: clock-conn-axi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <333333333>;
+		clock-output-names = "conn_axi_clk";
+	};
+
+	conn_ahb_clk: clock-conn-ahb {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <166666666>;
+		clock-output-names = "conn_ahb_clk";
+	};
+
+	conn_ipg_clk: clock-conn-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <83333333>;
+		clock-output-names = "conn_ipg_clk";
+	};
+
+	usbotg1: usb@5b0d0000 {
+		compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
+		reg = <0x5b0d0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy1>;
+		fsl,usbmisc = <&usbmisc1 0>;
+		clocks = <&usb2_lpcg 0>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_0>;
+		status = "disabled";
+	};
+
+	usbmisc1: usbmisc@5b0d0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x5b0d0200 0x200>;
+	};
+
+	usbphy1: usbphy@5b100000 {
+		compatible = "fsl,imx7ulp-usbphy";
+		reg = <0x5b100000 0x1000>;
+		clocks = <&usb2_lpcg 1>;
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+		status = "disabled";
+	};
+
+	usdhc1: mmc@5b010000 {
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5b010000 0x10000>;
+		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
+		power-domains = <&pd IMX_SC_R_SDHC_0>;
+		status = "disabled";
+	};
+
+	usdhc2: mmc@5b020000 {
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5b020000 0x10000>;
+		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
+		power-domains = <&pd IMX_SC_R_SDHC_1>;
+		fsl,tuning-start-tap = <20>;
+		fsl,tuning-step = <2>;
+		status = "disabled";
+	};
+
+	usdhc3: mmc@5b030000 {
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5b030000 0x10000>;
+		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
+		power-domains = <&pd IMX_SC_R_SDHC_2>;
+		status = "disabled";
+	};
+
+	fec1: ethernet@5b040000 {
+		reg = <0x5b040000 0x10000>;
+		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&enet0_lpcg IMX_LPCG_CLK_4>,
+			 <&enet0_lpcg IMX_LPCG_CLK_2>,
+			 <&enet0_lpcg IMX_LPCG_CLK_3>,
+			 <&enet0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+		assigned-clock-rates = <250000000>, <125000000>;
+		fsl,num-tx-queues = <3>;
+		fsl,num-rx-queues = <3>;
+		power-domains = <&pd IMX_SC_R_ENET_0>;
+		status = "disabled";
+	};
+
+	fec2: ethernet@5b050000 {
+		reg = <0x5b050000 0x10000>;
+		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&enet1_lpcg IMX_LPCG_CLK_4>,
+			 <&enet1_lpcg IMX_LPCG_CLK_2>,
+			 <&enet1_lpcg IMX_LPCG_CLK_3>,
+			 <&enet1_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>;
+		assigned-clock-rates = <250000000>, <125000000>;
+		fsl,num-tx-queues = <3>;
+		fsl,num-rx-queues = <3>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+
+	usbotg3: usb@5b110000 {
+		compatible = "fsl,imx8qm-usb3";
+		reg = <0x5b110000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+			 <&usb3_lpcg IMX_LPCG_CLK_0>,
+			 <&usb3_lpcg IMX_LPCG_CLK_7>,
+			 <&usb3_lpcg IMX_LPCG_CLK_4>,
+			 <&usb3_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "lpm", "bus", "aclk", "ipg", "core";
+		assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <250000000>;
+		power-domains = <&pd IMX_SC_R_USB_2>;
+		status = "disabled";
+
+		usbotg3_cdns3: usb@5b120000 {
+			compatible = "cdns,usb3";
+			reg = <0x5b120000 0x10000>,   /* memory area for OTG/DRD registers */
+			      <0x5b130000 0x10000>,   /* memory area for HOST registers */
+			      <0x5b140000 0x10000>;   /* memory area for DEVICE registers */
+			reg-names = "otg", "xhci", "dev";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host", "peripheral", "otg", "wakeup";
+			phys = <&usb3_phy>;
+			phy-names = "cdns3,usb3-phy";
+			cdns,on-chip-buff-size = /bits/ 16 <18>;
+			status = "disabled";
+		};
+	};
+
+	usb3_phy: usb-phy@5b160000 {
+		compatible = "nxp,salvo-phy";
+		reg = <0x5b160000 0x40000>;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_6>;
+		clock-names = "salvo_phy_clk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	/* LPCG clocks */
+	sdhc0_lpcg: clock-controller@5b200000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b200000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "sdhc0_lpcg_per_clk",
+				     "sdhc0_lpcg_ipg_clk",
+				     "sdhc0_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_0>;
+	};
+
+	sdhc1_lpcg: clock-controller@5b210000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b210000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "sdhc1_lpcg_per_clk",
+				     "sdhc1_lpcg_ipg_clk",
+				     "sdhc1_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_1>;
+	};
+
+	sdhc2_lpcg: clock-controller@5b220000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b220000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "sdhc2_lpcg_per_clk",
+				     "sdhc2_lpcg_ipg_clk",
+				     "sdhc2_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_2>;
+	};
+
+	enet0_lpcg: clock-controller@5b230000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b230000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "enet0_lpcg_timer_clk",
+				     "enet0_lpcg_txc_sampling_clk",
+				     "enet0_lpcg_ahb_clk",
+				     "enet0_lpcg_rgmii_txc_clk",
+				     "enet0_lpcg_ipg_clk",
+				     "enet0_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_ENET_0>;
+	};
+
+	enet1_lpcg: clock-controller@5b240000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "enet1_lpcg_timer_clk",
+				     "enet1_lpcg_txc_sampling_clk",
+				     "enet1_lpcg_ahb_clk",
+				     "enet1_lpcg_rgmii_txc_clk",
+				     "enet1_lpcg_ipg_clk",
+				     "enet1_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
+
+	usb2_lpcg: clock-controller@5b270000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b270000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_ahb_clk>, <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk";
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+	};
+
+	usb3_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		clock-output-names = "usb3_app_clk",
+				     "usb3_lpm_clk",
+				     "usb3_ipg_clk",
+				     "usb3_core_pclk",
+				     "usb3_phy_clk",
+				     "usb3_aclk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
new file mode 100644
index 0000000000..7d5183c6c5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+ddr_subsys: bus@5c000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
+
+	ddr_pmu0: ddr-pmu@5c020000 {
+		compatible = "fsl,imx8-ddr-pmu";
+		reg = <0x5c020000 0x10000>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
new file mode 100644
index 0000000000..adb98a72bd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+dma_subsys: bus@5a000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
+
+	dma_ipg_clk: clock-dma-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "dma_ipg_clk";
+	};
+
+	lpspi0: spi@5a000000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi0_lpcg 0>,
+			 <&spi0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+		status = "disabled";
+	};
+
+	lpspi1: spi@5a010000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a010000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi1_lpcg 0>,
+			 <&spi1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+		status = "disabled";
+	};
+
+	lpspi2: spi@5a020000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a020000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi2_lpcg 0>,
+			 <&spi2_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+		status = "disabled";
+	};
+
+	lpspi3: spi@5a030000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a030000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi3_lpcg 0>,
+			 <&spi3_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+		status = "disabled";
+	};
+
+	lpuart0: serial@5a060000 {
+		reg = <0x5a060000 0x1000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
+			 <&uart0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd IMX_SC_R_UART_0>;
+		status = "disabled";
+	};
+
+	lpuart1: serial@5a070000 {
+		reg = <0x5a070000 0x1000>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
+			 <&uart1_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd IMX_SC_R_UART_1>;
+		status = "disabled";
+	};
+
+	lpuart2: serial@5a080000 {
+		reg = <0x5a080000 0x1000>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
+			 <&uart2_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd IMX_SC_R_UART_2>;
+		status = "disabled";
+	};
+
+	lpuart3: serial@5a090000 {
+		reg = <0x5a090000 0x1000>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
+			 <&uart3_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd IMX_SC_R_UART_3>;
+		status = "disabled";
+	};
+
+	spi0_lpcg: clock-controller@5a400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi0_lpcg_clk",
+				     "spi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+	};
+
+	spi1_lpcg: clock-controller@5a410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi1_lpcg_clk",
+				     "spi1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+	};
+
+	spi2_lpcg: clock-controller@5a420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi2_lpcg_clk",
+				     "spi2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+	};
+
+	spi3_lpcg: clock-controller@5a430000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi3_lpcg_clk",
+				     "spi3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+	};
+
+	uart0_lpcg: clock-controller@5a460000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart0_lpcg_baud_clk",
+				     "uart0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_0>;
+	};
+
+	uart1_lpcg: clock-controller@5a470000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart1_lpcg_baud_clk",
+				     "uart1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_1>;
+	};
+
+	uart2_lpcg: clock-controller@5a480000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a480000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart2_lpcg_baud_clk",
+				     "uart2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_2>;
+	};
+
+	uart3_lpcg: clock-controller@5a490000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a490000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart3_lpcg_baud_clk",
+				     "uart3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_3>;
+	};
+
+	i2c0: i2c@5a800000 {
+		reg = <0x5a800000 0x4000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c0_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@5a810000 {
+		reg = <0x5a810000 0x4000>;
+		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_1>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@5a820000 {
+		reg = <0x5a820000 0x4000>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c2_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_2>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@5a830000 {
+		reg = <0x5a830000 0x4000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c3_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_3>;
+		status = "disabled";
+	};
+
+	adc0: adc@5a880000 {
+		compatible = "nxp,imx8qxp-adc";
+		#io-channel-cells = <1>;
+		reg = <0x5a880000 0x10000>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc0_lpcg 0>,
+			 <&adc0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+		status = "disabled";
+	 };
+
+	adc1: adc@5a890000 {
+		compatible = "nxp,imx8qxp-adc";
+		#io-channel-cells = <1>;
+		reg = <0x5a890000 0x10000>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc1_lpcg 0>,
+			 <&adc1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+		status = "disabled";
+	};
+
+	flexcan1: can@5a8d0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8d0000 0x10000>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&can0_lpcg 1>,
+			 <&can0_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_0>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <0>;
+		status = "disabled";
+	};
+
+	flexcan2: can@5a8e0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8e0000 0x10000>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		/* CAN0 clock and PD is shared among all CAN instances as
+		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
+		 * has to be powered on.
+		 */
+		clocks = <&can0_lpcg 1>,
+			 <&can0_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_1>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <1>;
+		status = "disabled";
+	};
+
+	flexcan3: can@5a8f0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8f0000 0x10000>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		/* CAN0 clock and PD is shared among all CAN instances as
+		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
+		 * has to be powered on.
+		 */
+		clocks = <&can0_lpcg 1>,
+			 <&can0_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_2>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <2>;
+		status = "disabled";
+	};
+
+	i2c0_lpcg: clock-controller@5ac00000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c0_lpcg_clk",
+				     "i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_0>;
+	};
+
+	i2c1_lpcg: clock-controller@5ac10000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c1_lpcg_clk",
+				     "i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_1>;
+	};
+
+	i2c2_lpcg: clock-controller@5ac20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c2_lpcg_clk",
+				     "i2c2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_2>;
+	};
+
+	i2c3_lpcg: clock-controller@5ac30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c3_lpcg_clk",
+				     "i2c3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_3>;
+	};
+
+	adc0_lpcg: clock-controller@5ac80000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac80000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc0_lpcg_clk",
+				     "adc0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+	};
+
+	adc1_lpcg: clock-controller@5ac90000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac90000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc1_lpcg_clk",
+				     "adc1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+	};
+
+	can0_lpcg: clock-controller@5acd0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5acd0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can0_lpcg_pe_clk",
+				     "can0_lpcg_ipg_clk",
+				     "can0_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
new file mode 100644
index 0000000000..a90654155a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ * Zhou Guoniu <guoniu.zhou@nxp.com>
+ */
+img_subsys: bus@58000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+
+	img_ipg_clk: clock-img-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "img_ipg_clk";
+	};
+
+	jpegdec: jpegdec@58400000 {
+		reg = <0x58400000 0x00050000>;
+		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+			 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+				  <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <200000000>, <200000000>;
+		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+				<&pd IMX_SC_R_MJPEG_DEC_S0>,
+				<&pd IMX_SC_R_MJPEG_DEC_S1>,
+				<&pd IMX_SC_R_MJPEG_DEC_S2>,
+				<&pd IMX_SC_R_MJPEG_DEC_S3>;
+	};
+
+	jpegenc: jpegenc@58450000 {
+		reg = <0x58450000 0x00050000>;
+		interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+			 <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+				  <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <200000000>, <200000000>;
+		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+				<&pd IMX_SC_R_MJPEG_ENC_S0>,
+				<&pd IMX_SC_R_MJPEG_ENC_S1>,
+				<&pd IMX_SC_R_MJPEG_ENC_S2>,
+				<&pd IMX_SC_R_MJPEG_ENC_S3>;
+	};
+
+	img_jpeg_dec_lpcg: clock-controller@585d0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585d0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_4>;
+		clock-output-names = "img_jpeg_dec_lpcg_clk",
+				     "img_jpeg_dec_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
+	};
+
+	img_jpeg_enc_lpcg: clock-controller@585f0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585f0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_4>;
+		clock-output-names = "img_jpeg_enc_lpcg_clk",
+				     "img_jpeg_enc_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
new file mode 100644
index 0000000000..133f2b1ce1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+lsio_subsys: bus@5d000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>,
+		 <0x08000000 0x0 0x08000000 0x10000000>;
+
+	lsio_mem_clk: clock-lsio-mem {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "lsio_mem_clk";
+	};
+
+	lsio_bus_clk: clock-lsio-bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "lsio_bus_clk";
+	};
+
+	lsio_pwm0: pwm@5d000000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d000000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm0_lpcg 4>,
+			 <&pwm0_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_pwm1: pwm@5d010000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d010000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm1_lpcg 4>,
+			 <&pwm1_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_pwm2: pwm@5d020000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d020000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm2_lpcg 4>,
+			 <&pwm2_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_pwm3: pwm@5d030000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d030000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm3_lpcg 4>,
+			 <&pwm3_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_gpio0: gpio@5d080000 {
+		reg = <0x5d080000 0x10000>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_0>;
+	};
+
+	lsio_gpio1: gpio@5d090000 {
+		reg = <0x5d090000 0x10000>;
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_1>;
+	};
+
+	lsio_gpio2: gpio@5d0a0000 {
+		reg = <0x5d0a0000 0x10000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_2>;
+	};
+
+	lsio_gpio3: gpio@5d0b0000 {
+		reg = <0x5d0b0000 0x10000>;
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_3>;
+	};
+
+	lsio_gpio4: gpio@5d0c0000 {
+		reg = <0x5d0c0000 0x10000>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_4>;
+	};
+
+	lsio_gpio5: gpio@5d0d0000 {
+		reg = <0x5d0d0000 0x10000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_5>;
+	};
+
+	lsio_gpio6: gpio@5d0e0000 {
+		reg = <0x5d0e0000 0x10000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_6>;
+	};
+
+	lsio_gpio7: gpio@5d0f0000 {
+		reg = <0x5d0f0000 0x10000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_7>;
+	};
+
+	flexspi0: spi@5d120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,imx8qxp-fspi";
+		reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>;
+		reg-names = "fspi_base", "fspi_mmap";
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
+		clock-names = "fspi_en", "fspi";
+		power-domains = <&pd IMX_SC_R_FSPI_0>;
+		status = "disabled";
+	};
+
+	lsio_mu0: mailbox@5d1b0000 {
+		reg = <0x5d1b0000 0x10000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu1: mailbox@5d1c0000 {
+		reg = <0x5d1c0000 0x10000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+	};
+
+	lsio_mu2: mailbox@5d1d0000 {
+		reg = <0x5d1d0000 0x10000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu3: mailbox@5d1e0000 {
+		reg = <0x5d1e0000 0x10000>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu4: mailbox@5d1f0000 {
+		reg = <0x5d1f0000 0x10000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu5: mailbox@5d200000 {
+		reg = <0x5d200000 0x10000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_MU_5A>;
+		status = "disabled";
+	};
+
+	lsio_mu6: mailbox@5d210000 {
+		reg = <0x5d210000 0x10000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_MU_6A>;
+		status = "disabled";
+	};
+
+	lsio_mu13: mailbox@5d280000 {
+		reg = <0x5d280000 0x10000>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_MU_13A>;
+	};
+
+	/* LPCG clocks */
+	pwm0_lpcg: clock-controller@5d400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm0_lpcg_ipg_clk",
+				     "pwm0_lpcg_ipg_hf_clk",
+				     "pwm0_lpcg_ipg_s_clk",
+				     "pwm0_lpcg_ipg_slv_clk",
+				     "pwm0_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_0>;
+	};
+
+	pwm1_lpcg: clock-controller@5d410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm1_lpcg_ipg_clk",
+				     "pwm1_lpcg_ipg_hf_clk",
+				     "pwm1_lpcg_ipg_s_clk",
+				     "pwm1_lpcg_ipg_slv_clk",
+				     "pwm1_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_1>;
+	};
+
+	pwm2_lpcg: clock-controller@5d420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm2_lpcg_ipg_clk",
+				     "pwm2_lpcg_ipg_hf_clk",
+				     "pwm2_lpcg_ipg_s_clk",
+				     "pwm2_lpcg_ipg_slv_clk",
+				     "pwm2_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_2>;
+	};
+
+	pwm3_lpcg: clock-controller@5d430000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm3_lpcg_ipg_clk",
+				     "pwm3_lpcg_ipg_hf_clk",
+				     "pwm3_lpcg_ipg_s_clk",
+				     "pwm3_lpcg_ipg_slv_clk",
+				     "pwm3_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_3>;
+	};
+
+	pwm4_lpcg: clock-controller@5d440000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d440000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm4_lpcg_ipg_clk",
+				     "pwm4_lpcg_ipg_hf_clk",
+				     "pwm4_lpcg_ipg_s_clk",
+				     "pwm4_lpcg_ipg_slv_clk",
+				     "pwm4_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_4>;
+	};
+
+	pwm5_lpcg: clock-controller@5d450000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d450000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm5_lpcg_ipg_clk",
+				     "pwm5_lpcg_ipg_hf_clk",
+				     "pwm5_lpcg_ipg_s_clk",
+				     "pwm5_lpcg_ipg_slv_clk",
+				     "pwm5_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_5>;
+	};
+
+	pwm6_lpcg: clock-controller@5d460000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm6_lpcg_ipg_clk",
+				     "pwm6_lpcg_ipg_hf_clk",
+				     "pwm6_lpcg_ipg_s_clk",
+				     "pwm6_lpcg_ipg_slv_clk",
+				     "pwm6_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_6>;
+	};
+
+	pwm7_lpcg: clock-controller@5d470000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm7_lpcg_ipg_clk",
+				     "pwm7_lpcg_ipg_hf_clk",
+				     "pwm7_lpcg_ipg_s_clk",
+				     "pwm7_lpcg_ipg_slv_clk",
+				     "pwm7_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
new file mode 100644
index 0000000000..c6540768bd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+vpu: vpu@2c000000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x2c000000 0x0 0x2c000000 0x2000000>;
+	reg = <0 0x2c000000 0 0x1000000>;
+	power-domains = <&pd IMX_SC_R_VPU>;
+	status = "disabled";
+
+	mu_m0: mailbox@2d000000 {
+		compatible = "fsl,imx6sx-mu";
+		reg = <0x2d000000 0x20000>;
+		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_VPU_MU_0>;
+		status = "disabled";
+	};
+
+	mu1_m0: mailbox@2d020000 {
+		compatible = "fsl,imx6sx-mu";
+		reg = <0x2d020000 0x20000>;
+		interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_VPU_MU_1>;
+		status = "disabled";
+	};
+
+	mu2_m0: mailbox@2d040000 {
+		compatible = "fsl,imx6sx-mu";
+		reg = <0x2d040000 0x20000>;
+		interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_VPU_MU_2>;
+		status = "disabled";
+	};
+
+	vpu_core0: vpu-core@2d080000 {
+		reg = <0x2d080000 0x10000>;
+		compatible = "nxp,imx8q-vpu-decoder";
+		power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
+		mbox-names = "tx0", "tx1", "rx";
+		mboxes = <&mu_m0 0 0>,
+			<&mu_m0 0 1>,
+			<&mu_m0 1 0>;
+		status = "disabled";
+	};
+
+	vpu_core1: vpu-core@2d090000 {
+		reg = <0x2d090000 0x10000>;
+		compatible = "nxp,imx8q-vpu-encoder";
+		power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
+		mbox-names = "tx0", "tx1", "rx";
+		mboxes = <&mu1_m0 0 0>,
+			<&mu1_m0 0 1>,
+			<&mu1_m0 1 0>;
+		status = "disabled";
+	};
+
+	vpu_core2: vpu-core@2d0a0000 {
+		reg = <0x2d0a0000 0x10000>;
+		compatible = "nxp,imx8q-vpu-encoder";
+		power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
+		mbox-names = "tx0", "tx1", "rx";
+		mboxes = <&mu2_m0 0 0>,
+			<&mu2_m0 0 1>,
+			<&mu2_m0 1 0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
new file mode 100644
index 0000000000..b9157ca08b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxl.dtsi"
+
+/ {
+	model = "Freescale i.MX8DXL EVK";
+	compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
+
+	aliases {
+		i2c2 = &i2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart0;
+	};
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * Memory reserved for optee usage. Please do not use.
+		 * This will be automatically added to dtb if OP-TEE is installed.
+		 * optee@96000000 {
+		 *     reg = <0 0x96000000 0 0x2000000>;
+		 *     no-map;
+		 * };
+		 */
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x14000000>;
+			alloc-ranges = <0 0x98000000 0 0x14000000>;
+			linux,cma-default;
+		};
+	};
+
+	mux3_en: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "mux3_en";
+		gpio = <&pca6416_2 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	reg_fec1_sel: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_fec1_io: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_io_supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_usdhc2_vmmc: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <3480>;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	mii_select: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mii-select";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&scu_gpio 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	nvmem-cells = <&fec_mac1>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			eee-broken-1000t;
+			qca,disable-smarteee;
+			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
+			vddio-supply = <&vddio0>;
+
+			vddio0: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+/*
+ * fec1 shares the some PINs with usdhc2.
+ * by default usdhc2 is enabled in this dts.
+ * Please disable usdhc2 to enable fec1
+ */
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	rx-internal-delay-ps = <2000>;
+	nvmem-cells = <&fec_mac0>;
+	nvmem-cell-names = "mac-address";
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&pca6416_1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio1>;
+
+			vddio1: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	nxp,fspi-dll-slvdly = <4>;
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca6416_1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca6416_2: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9548_1: i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			max7322: gpio@68 {
+				compatible = "maxim,max7322";
+				reg = <0x68>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&lsio_gpio4 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usbphy1 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <114>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy2 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <111>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&lpspi3 {
+	fsl,spi-only-use-cs1-sel;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		reg = <0>;
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <30000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD	0x000514a0
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD	0x000014a0
+			IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1		0x0600004c
+			IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN	0x0600004c
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			IMX8DXL_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			IMX8DXL_USB_SS3_TC1_CONN_USB_OTG2_PWR		0x00000021
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			IMX8DXL_ENET0_MDC_CONN_EQOS_MDC				0x06000020
+			IMX8DXL_ENET0_MDIO_CONN_EQOS_MDIO			0x06000020
+			IMX8DXL_ENET1_RGMII_RXC_CONN_EQOS_RGMII_RXC		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD0_CONN_EQOS_RGMII_RXD0		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD1_CONN_EQOS_RGMII_RXD1		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD2_CONN_EQOS_RGMII_RXD2		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD3_CONN_EQOS_RGMII_RXD3		0x06000020
+			IMX8DXL_ENET1_RGMII_RX_CTL_CONN_EQOS_RGMII_RX_CTL	0x06000020
+			IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RGMII_TXC		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD0_CONN_EQOS_RGMII_TXD0		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD1_CONN_EQOS_RGMII_TXD1		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD2_CONN_EQOS_RGMII_TXD2		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD3_CONN_EQOS_RGMII_TXD3		0x06000020
+			IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL	0x06000020
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD		0x000014a0
+			IMX8DXL_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8DXL_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8DXL_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x00000060
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000060
+			IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x00000060
+			IMX8DXL_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000060
+		>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <
+			IMX8DXL_SPI3_SCK_ADMA_SPI3_SCK		0x6000040
+			IMX8DXL_SPI3_SDO_ADMA_SPI3_SDO		0x6000040
+			IMX8DXL_SPI3_SDI_ADMA_SPI3_SDI		0x6000040
+			IMX8DXL_SPI3_CS1_ADMA_SPI3_CS1		0x6000040
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA		0x06000021
+			IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_cm40_lpuart: cm40lpuartgrp {
+		fsl,pins = <
+			IMX8DXL_ADC_IN2_M40_UART0_RX		0x06000020
+			IMX8DXL_ADC_IN3_M40_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA		0x06000021
+			IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8DXL_UART0_RX_ADMA_UART0_RX		0x06000020
+			IMX8DXL_UART0_TX_ADMA_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30	0x00000040 /* RESET_B */
+			IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00	0x00000021 /* WP */
+			IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01	0x00000021 /* CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK		0x06000041
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3	0x00000021
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT	0x00000021
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
new file mode 100644
index 0000000000..e2eeddf38a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+&audio_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&dma_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&adc0 {
+	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c0 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c2 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c3 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart0 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi0 {
+	interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi1 {
+	interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi2 {
+	interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi3 {
+	interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
new file mode 100644
index 0000000000..652493ae4b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+/delete-node/ &enet1_lpcg;
+/delete-node/ &fec2;
+
+&conn_subsys {
+	conn_enet0_root_clk: clock-conn-enet0-root {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "conn_enet0_root_clk";
+	};
+
+	eqos: ethernet@5b050000 {
+		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
+		reg = <0x5b050000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "eth_wake_irq", "macirq";
+		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
+			 <&eqos_lpcg IMX_LPCG_CLK_6>,
+			 <&eqos_lpcg IMX_LPCG_CLK_0>,
+			 <&eqos_lpcg IMX_LPCG_CLK_5>,
+			 <&eqos_lpcg IMX_LPCG_CLK_2>;
+		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <125000000>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+
+	usbotg2: usb@5b0e0000 {
+		compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+		reg = <0x5b0e0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		/*
+		 * usbotg1 and usbotg2 share one clcok.
+		 * scu firmware disables the access to the clock and keeps
+		 * it always on in case other core (M4) uses one of these.
+		 */
+		clocks = <&clk_dummy>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_1>;
+		status = "disabled";
+
+		clk_dummy: clock-dummy {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "clk_dummy";
+		};
+	};
+
+	usbmisc2: usbmisc@5b0e0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x5b0e0200 0x200>;
+	};
+
+	usbphy2: usbphy@5b110000 {
+		compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+		reg = <0x5b110000 0x1000>;
+		clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
+		power-domains = <&pd IMX_SC_R_USB_1_PHY>;
+		status = "disabled";
+	};
+
+	eqos_lpcg: clock-controller@5b240000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_enet0_root_clk>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "eqos_ptp",
+				     "eqos_mem_clk",
+				     "eqos_aclk",
+				     "eqos_clk",
+				     "eqos_csr_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
+
+	usb2_2_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_7>;
+		clocks = <&conn_ipg_clk>;
+		clock-output-names = "usboh3_2_phy_ipg_clk";
+		power-domains = <&pd IMX_SC_R_USB_1_PHY>;
+	};
+
+};
+
+&enet0_lpcg {
+	clocks = <&conn_enet0_root_clk>,
+		 <&conn_enet0_root_clk>,
+		 <&conn_axi_clk>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+		 <&conn_ipg_clk>,
+		 <&conn_ipg_clk>;
+};
+
+&fec1 {
+	compatible = "fsl,imx8qm-fec";
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+	assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+	assigned-clock-rates = <125000000>;
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbotg1 {
+	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+	/*
+	 * usbotg1 and usbotg2 share one clock
+	 * scfw disable clock access and keep it always on
+	 * in case other core (M4) use one of these.
+	 */
+	clocks = <&clk_dummy>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
new file mode 100644
index 0000000000..550f513708
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+&ddr_pmu0 {
+	compatible = "fsl,imx8-ddr-pmu";
+	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
new file mode 100644
index 0000000000..5f4f789e4a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+&flexspi0 {
+	compatible = "nxp,imx8dxl-fspi";
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 47 13>,
+		      <&iomuxc 13 61 4>,
+		      <&iomuxc 19 67 4>,
+		      <&iomuxc 24 72 1>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 4 74 5>,
+		      <&iomuxc 9 80 16>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 1 98 2>,
+		      <&iomuxc 3 101 1>,
+		      <&iomuxc 5 107 8>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 115 4>,
+		      <&iomuxc 9 121 1>,
+		      <&iomuxc 10 120 1>,
+		      <&iomuxc 11 123 1>,
+		      <&iomuxc 12 122 1>,
+		      <&iomuxc 13 125 1>,
+		      <&iomuxc 14 124 1>,
+		      <&iomuxc 16 126 1>,
+		      <&iomuxc 17 128 1>,
+		      <&iomuxc 18 131 1>,
+		      <&iomuxc 19 130 1>,
+		      <&iomuxc 20 133 1>,
+		      <&iomuxc 21 132 1>,
+		      <&iomuxc 22 129 1>,
+		      <&iomuxc 23 134 1>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 12>,
+		      <&iomuxc 19 22 2>,
+		      <&iomuxc 21 25 2>,
+		      <&iomuxc 29 29 3>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 32 3>,
+		      <&iomuxc 3 36 6>,
+		      <&iomuxc 9 43 3>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 53 7>,
+		      <&iomuxc 8 86 10>,
+		      <&iomuxc 19 107 8>;
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 8 22 2>,
+		      <&iomuxc 10 25 2>,
+		      <&iomuxc 16 44 2>;
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
new file mode 100644
index 0000000000..792b7224ca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &eqos;
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		mu1 = &lsio_mu1;
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 clusters with 2 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	system-controller {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: power-controller {
+			compatible = "fsl,scu-pd";
+			#power-domain-cells = <1>;
+			wakeup-irq = <160 163 235 236 237 228 229 230 231 238
+				     239 240 166 169>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+		};
+
+		scu_gpio: gpio {
+			compatible = "fsl,imx8qxp-sc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8dxl-iomuxc";
+		};
+
+		ocotp: ocotp {
+			compatible = "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			fec_mac0: mac@2c4 {
+				reg = <0x2c4 6>;
+			};
+
+			fec_mac1: mac@2c6 {
+				reg = <0x2c6 6>;
+			};
+		};
+
+		rtc: rtc {
+			compatible = "fsl,imx8qxp-sc-rtc";
+		};
+
+		sc_pwrkey: keys {
+			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		watchdog {
+			compatible = "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	/* The two values below cannot be changed by the board */
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8dxl-ss-adma.dtsi"
+#include "imx8dxl-ss-conn.dtsi"
+#include "imx8dxl-ss-lsio.dtsi"
+#include "imx8dxl-ss-ddr.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
new file mode 100644
index 0000000000..b10e2a703a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led3>;
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie0_refclk_gated:  pcie0-refclk-gated {
+		compatible = "gpio-gate-clock";
+		clocks = <&pcie0_refclk>;
+		#clock-cells = <0>;
+		enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg1: regulator-usbotg1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg1>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_camera: regulator-camera {
+		compatible = "regulator-fixed";
+		regulator-name = "mipi_pwr";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pci_pwr_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pca6416_1 1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "microchip,at25160bn", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <32>;
+		size = <2048>;
+		address-width = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	camera@10 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x10>;
+		clocks = <&clk IMX8MM_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		AVDD-supply = <&reg_camera>;  /* 2.8v */
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	pca6416_0: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+	ports {
+		port@0 {
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk_gated>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk_gated>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usbotg1>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphynop2 {
+	reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13              0x41
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
+		>;
+	};
+
+	pinctrl_reg_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
+			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x40
+			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x40
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
new file mode 100644
index 0000000000..905c98cb08
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-beacon-som.dtsi"
+#include "imx8mm-beacon-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8M Mini Development Kit";
+	compatible = "beacon,imx8mm-beacon-kit", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	reg_hdmi: regulator-hdmi-dvdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		regulator-name = "hdmi_pwr_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+		regulator-always-on;
+	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-hdmi";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+};
+
+&i2c2 {
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_bridge>;
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&reg_hdmi>;
+		a2vdd-supply = <&reg_hdmi>;
+		dvdd-supply = <&reg_hdmi>;
+		pvdd-supply = <&reg_hdmi>;
+		v1p2-supply = <&reg_hdmi>;
+		v3p3-supply = <&reg_hdmi>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <20000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hdmi_bridge: hdmibridgegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_reg_hdmi: reghdmigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11              0x16
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC	0xd6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
new file mode 100644
index 0000000000..f264102bdb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc1_gpio>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		max-speed = <4000000>;
+		clock-names = "extclk";
+	};
+};
+
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7	0x19
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x19
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x166
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9		0x111
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
new file mode 100644
index 0000000000..b1f2beb40a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -0,0 +1,1007 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/qca-ar803x.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Data Modul i.MX8M Mini eDM SBC";
+	compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* There are 1/2/4 GiB options, adjusted by bootloader. */
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_backlight>;
+		brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 5000000 0>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_xtal32k: clk-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	panel: panel {
+		backlight = <&backlight>;
+		power-supply = <&reg_panel_vcc>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_panel_vcc: regulator-panel-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_vcc_reg>;
+		regulator-name = "PANEL_VCC";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 6 0>;
+		enable-active-high;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vcc_reg>;
+		regulator-name = "V_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 0>;
+		enable-active-high;
+	};
+
+	watchdog {
+		/* TPS3813 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_watchdog_gpio>;
+		compatible = "linux,wdt-gpio";
+		always-running;
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		hw_algo = "level";
+		/* Reset triggers in 2..3 seconds */
+		hw_margin_ms = <1500>;
+		/* Disabled by default */
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {	/* W25Q128FVSI */
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&ecspi2 {	/* Feature connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless feature board plugged in. */
+	status = "disabled";
+};
+
+&ecspi3 {	/* Display connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&fec1_phy>;
+	phy-supply = <&buck4_reg>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		fec1_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-name = "VDDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh: vddh-regulator {
+				regulator-name = "VDDH";
+			};
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "ENET_RST#", "WDOG_B#", "PMIC_INT#",
+		"", "M2-B_PCIE_RST#", "M2-B_PCIE_WAKE#", "RTC_IRQ#",
+		"WDOG_KICK#", "M2-B_PCIE_CLKREQ#",
+		"USB1_OTG_ID_3V3", "ENET_WOL#",
+		"", "", "", "ENET_INT#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"MEMCFG2", "MEMCFG1", "DSI_RESET_1V8#", "DSI_IRQ_1V8#",
+		"M2-B_FULL_CARD_PWROFF_1V8#", "EEPROM_WP_1V8#",
+		"PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", "GRAPHICS_PRSNT_1V8#",
+		"MEMCFG0", "WDOG_EN",
+		"M2-B_W_DISABLE1_WWAN_1V8#", "M2-B_W_DISABLE2_GPS_1V8#",
+		"", "", "", "",
+		"", "", "", "SD2_RESET#", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
+		"", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
+		"CSI_PD_1V8", "CSI_RESET_1V8#", "", "",
+		"", "", "", "",
+		"", "", "", "M2-B_WAKE_WWAN_1V8#",
+		"M2-B_RESET_1V8#", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"NC0", "NC1", "BOOTCFG0", "BOOTCFG1",
+		"BOOTCFG2", "BOOTCFG3", "BOOTCFG4", "BOOTCFG5",
+		"BOOTCFG6", "BOOTCFG7", "NC10", "NC11",
+		"BOOTCFG8", "BOOTCFG9", "BOOTCFG10", "BOOTCFG11",
+		"BOOTCFG12", "BOOTCFG13", "BOOTCFG14", "BOOTCFG15",
+		"NC20", "", "", "",
+		"", "CAN_INT#", "CAN_RST#", "GPIO4_IO27",
+		"DIS_USB_DN2", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "DIS_USB_DN1", "USBHUB_RESET#", "GPIO5_IO03",
+		"GPIO5_IO04", "", "", "",
+		"", "SPI1_CS#", "", "",
+		"", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
+		"I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
+		"I2C4_SCL_3V3", "I2C4_SDA_3V3", "", "",
+		"", "SPI3_CS#", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		#clock-cells = <0>;
+		clocks = <&clk_xtal32k>;
+		clock-output-names = "clk-32k-out";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		rohm,reset-snvs-powered;
+
+		/*
+		 * i.MX 8M Mini Data Sheet for Consumer Products
+		 * 3.1.3 Operating ranges
+		 * MIMX8MM4DVTLZAA
+		 */
+		regulators {
+			/* VDD_SOC */
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <950000>;
+			};
+
+			/* VDD_DRAM, BUCK5 */
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				/* 1.5 GHz DDR bus clock */
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 3V3_VDD, BUCK6 */
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V8_VDD, BUCK7 */
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V1_NVCC_DRAM, BUCK8 */
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V8_NVCC_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 0V8_VDD_SNVS */
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V8_VDDA */
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 0V9_VDD_PHY */
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V2_VDD_PHY */
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	usb-hub@2c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		compatible = "microchip,usb2514bi";
+		reg = <0x2c>;
+		individual-port-switching;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		self-powered;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		compatible = "st,m41t62";
+		reg = <0x68>;
+		interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pcieclk: clk@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&i2c3 {	/* Display connector I2C */
+	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+	clock-frequency = <320000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {	/* Feature connector I2C */
+	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+	clock-frequency = <320000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
+		    <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
+		    <&pinctrl_panel_expansion>;
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x44
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x44
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x44
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x44
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x44
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x44
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x44
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x44
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x44
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x40
+		>;
+	};
+
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			/* ENET_RST# */
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x6
+			/* ENET_WOL# */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x40000090
+			/* ENET_INT# */
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x40000090
+		>;
+	};
+
+	pinctrl_hog_feature: hog-feature-grp {
+		fsl,pins = <
+			/* GPIO4_IO27 */
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x40000006
+			/* GPIO5_IO03 */
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3			0x40000006
+			/* GPIO5_IO04 */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4			0x40000006
+
+			/* CAN_INT# */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x40000090
+			/* CAN_RST# */
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26		0x26
+		>;
+	};
+
+	pinctrl_hog_panel: hog-panel-grp {
+		fsl,pins = <
+			/* GRAPHICS_GPIO0_1V8 */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x26
+		>;
+	};
+
+	pinctrl_hog_misc: hog-misc-grp {
+		fsl,pins = <
+			/* PG_V_IN_VAR# */
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x40000000
+			/* CSI_PD_1V8 */
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8		0x0
+			/* CSI_RESET_1V8# */
+			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9		0x0
+
+			/* DIS_USB_DN1 */
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x0
+			/* DIS_USB_DN2 */
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x0
+
+			/* EEPROM_WP_1V8# */
+			MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5		0x100
+			/* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6		0x0
+			/* GRAPHICS_PRSNT_1V8# */
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7		0x40000000
+
+			/* CLK_CCM_CLKO1_3V3 */
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x10
+		>;
+	};
+
+	pinctrl_hog_sbc: hog-sbc-grp {
+		fsl,pins = <
+			/* MEMCFG[0..2] straps */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8		0x40000140
+			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1			0x40000140
+			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0			0x40000140
+
+			/* BOOT_CFG[0..15] straps */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x40000000
+
+			/* Not connected pins */
+			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x0
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x0
+			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11		0x0
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x0
+			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000084
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x84
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x84
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000084
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x84
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x84
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000084
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x84
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x84
+		>;
+	};
+
+	pinctrl_i2c4: i2c4-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000084
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x84
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x84
+		>;
+	};
+
+	pinctrl_panel_backlight: panel-backlight-grp {
+		fsl,pins = <
+			/* BL_ENABLE_1V8 */
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x104
+		>;
+	};
+
+	pinctrl_panel_expansion: panel-expansion-grp {
+		fsl,pins = <
+			/* DSI_RESET_1V8# */
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2		0x2
+			/* DSI_IRQ_1V8# */
+			MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3		0x40000090
+		>;
+	};
+
+	pinctrl_panel_vcc_reg: panel-vcc-grp {
+		fsl,pins = <
+			/* TFT_ENABLE_1V8 */
+			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6		0x104
+		>;
+	};
+
+	pinctrl_panel_pwm: panel-pwm-grp {
+		fsl,pins = <
+			/* BL_PWM_3V3 */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x12
+		>;
+	};
+
+	pinctrl_pcie0: pcie-grp {
+		fsl,pins = <
+			/* M2-B_RESET_1V8# */
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x102
+			/* M2-B_PCIE_RST# */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x2
+			/* M2-B_FULL_CARD_PWROFF_1V8# */
+			MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4		0x102
+			/* M2-B_W_DISABLE1_WWAN_1V8# */
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x102
+			/* M2-B_W_DISABLE2_GPS_1V8# */
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11		0x102
+			/* CLK_M2_32K768 */
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x14
+			/* M2-B_WAKE_WWAN_1V8# */
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x40000140
+			/* M2-B_PCIE_WAKE# */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x40000140
+			/* M2-B_PCIE_CLKREQ# */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x40000140
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x40000090
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			/* RTC_IRQ# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x40000090
+		>;
+	};
+
+	pinctrl_sai5: sai5-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK		0x100
+			MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0		0x0
+			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC		0x100
+			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK		0x100
+			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0		0x100
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x90
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x90
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x50
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x50
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x50
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x90
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x50
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x90
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x40
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x40
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_usb_hub: usb-hub-grp {
+		fsl,pins = <
+			/* USBHUB_RESET# */
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x4
+		>;
+	};
+
+	pinctrl_usb_otg1: usb-otg1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x40000000
+			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x4
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x40000090
+		>;
+	};
+
+	pinctrl_usdhc2_vcc_reg: usdhc2-vcc-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+			MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B		0x40
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+			MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B		0x40
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+			MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B		0x40
+		>;
+	};
+
+	pinctrl_watchdog_gpio: watchdog-gpio-grp {
+		fsl,pins = <
+			/* WDOG_B# */
+			MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2		0x26
+			/* WDOG_EN -- ungate WDT RESET# signal propagation */
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9		0x6
+			/* WDOG_KICK# / WDI */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x26
+		>;
+	};
+};
+
+&pcie_phy {
+	fsl,clkreq-unsupported;	/* CLKREQ_B is not connected to suitable input */
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	clocks = <&pcieclk 0>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 0>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_panel_pwm>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	fsl,sai-mclk-direction-output;
+	/* Input into codec PLL */
+	assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	assigned-clock-rates = <22579200>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&snvs_rtc {
+	clocks = <&pmic>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&uart3 {	/* A53 Debug */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {	/* M4 Debug */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	/* UART4 is reserved for CM and RDC blocks CA access to UART4. */
+	status = "disabled";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {	/* MicroSD */
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2_ROOT>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	status = "okay";
+};
+
+&usdhc3 {	/* eMMC */
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&buck4_reg>;
+	vqmmc-supply = <&buck5_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
new file mode 100644
index 0000000000..010e836ebe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM DDR4 EVK with CYW43455 WIFI/BT board";
+	compatible = "fsl,imx8mm-ddr4-evk", "fsl,imx8mm";
+
+	leds {
+		pinctrl-0 = <&pinctrl_gpio_led_2>;
+
+		status {
+			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE		0x00000096
+			MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B		0x00000096
+			MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B		0x00000096
+			MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE		0x00000096
+			MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00		0x00000096
+			MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01		0x00000096
+			MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02		0x00000096
+			MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03		0x00000096
+			MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04		0x00000096
+			MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05		0x00000096
+			MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06		0x00000096
+			MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07		0x00000096
+			MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B		0x00000096
+			MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B	0x00000056
+			MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B		0x00000096
+			MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B		0x00000096
+		>;
+	};
+
+	pinctrl_gpio_led_2: gpioled2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4	0x19
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
new file mode 100644
index 0000000000..c8ff702126
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Frank Erdrich <frank.erdrich@emtrion.com>
+//
+
+/dts-v1/;
+
+#include "imx8mm-emcon.dtsi"
+#include "imx8mm-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX8M mini on Avari";
+	compatible = "emtrion,emcon-mx8mm-avari", "fsl,imx8mm";
+};
+
+&lvds_backlight {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
new file mode 100644
index 0000000000..d897a85273
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2021 emtrion GmbH
+// Author: Frank Erdrich <frank.erdrich@emtrion.com>
+//
+
+/ {
+	aliases {
+		boardid = &boardID;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_wall_5p0: regulator-wall5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "Main-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base3p3: regulator-base3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "3V3-avari";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base1p5: regulator-base1p5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_base3p3>;
+		regulator-name = "1V5-avari";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg: regulator-otgvbus {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	clk_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_codec>;
+		VDDA-supply = <&reg_base3p3>;
+		VDDIO-supply = <&reg_base3p3>;
+	};
+
+	boardID: gpio@3a {
+		compatible = "nxp,pca8574";
+		reg = <0x3a>;
+		gpio-controller;
+		#gpio-cells = <1>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&uart2 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "disabled";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
new file mode 100644
index 0000000000..af7dc8d1f5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP
+// Copyright (C) 2021 emtrion GmbH
+//
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	som_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-green {
+			label = "som:green";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-red {
+			label = "som:red";
+			gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	lvds_backlight: lvds-backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <
+			0 4 8 16 32 64 80 96 112
+			128 144 160 176 250
+		>;
+		default-brightness-level = <9>;
+		status = "disabled";
+	};
+
+	reg_usdhc1_vmmc: regulator-emmc {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+				<&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	pinctrl-1 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_csi_pwn: csi-pwn-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1cs-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40000
+		>;
+	};
+
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC				0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO			0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9			0x19
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+			MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS		0x82
+		>;
+	};
+
+	pinctrl_flexspi1: flexspi1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK		0x1c2
+			MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B	0x82
+			MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0	0x82
+			MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1	0x82
+			MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2	0x82
+			MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3	0x82
+		>;
+	};
+
+	pinctrl_gpio_led: gpio-led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10		0x19
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_lvds: lvds-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x06
+		>;
+	};
+
+	pinctrl_pcie0: pcie0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicirq-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT		0x06
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
+			MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+		>;
+	};
+
+	pinctrl_spdif1: spdif1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT		0xd6
+			MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN			0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+
+			/* rts and cts */
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x41
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	/* no reset for sdhc2 interface */
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x1c4
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	bd71847: pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	rv1805: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+	};
+};
+
+&mu {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12000000>;
+	status = "disabled";
+};
+
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+		<&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+		"rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
+	status = "disabled";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_usdhc1_vmmc>;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
new file mode 100644
index 0000000000..1c4e4d1759
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Emtop Embedded Solutions
+ */
+
+/dts-v1/;
+
+#include "imx8mm-emtop-som.dtsi"
+
+/ {
+	model = "Emtop Embedded Solutions i.MX8M Mini Baseboard V1";
+	compatible = "ees,imx8mm-emtop-baseboard", "ees,imx8mm-emtop-som",
+		"fsl,imx8mm";
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi
new file mode 100644
index 0000000000..67d22d3768
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Emtop Embedded Solutions
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Emtop Embedded Solutions i.MX8M Mini SOM-IMX8MMLPD4 SoM";
+	compatible = "ees,imx8mm-emtop-som", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <945000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <945000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <3600000>;
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_led: emtop-gpio-led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16			0x19
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29			0x19
+		>;
+	};
+
+	pinctrl_i2c1: emtop-i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL				0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: emtop-pmic-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3			0x41
+		>;
+	};
+
+	pinctrl_uart2: emtop-uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX			0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX			0x140
+		>;
+	};
+
+	pinctrl_usdhc3: emtop-usdhc3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: emtop-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: emtop-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: emtop-wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
new file mode 100644
index 0000000000..b68954bcc3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVK board";
+	compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
+
+	aliases {
+		spi0 = &flexspi;
+	};
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x196
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
new file mode 100644
index 0000000000..a882c86ec3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -0,0 +1,743 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie0_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_vddext_3v3: regulator-vddext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <250>;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+		linux,autosuspend-period = <125>;
+	};
+
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	wm8524: audio-codec {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_wlf>;
+		wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8524-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Line", "Left Line Out Jack",
+			"Line", "Right Line Out Jack";
+		simple-audio-card,routing =
+			"Left Line Out Jack", "LINEVOUTL",
+			"Right Line Out Jack", "LINEVOUTR";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <32>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8524>;
+			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&buck5_reg>;
+		dvdd-supply = <&buck5_reg>;
+		pvdd-supply = <&buck5_reg>;
+		a2vdd-supply = <&buck5_reg>;
+		v3p3-supply = <&reg_vddext_3v3>;
+		v1p2-supply = <&buck5_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+
+		};
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 8>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "nxp,pca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&buck4_reg>;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_camera>;
+		clocks = <&clk IMX8MM_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	wakeup-source;
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_backlight>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13              0x4f
+		>;
+	};
+
+	pinctrl_gpio_wlf: gpiowlfgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0xd6
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B    0x61
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
+		>;
+	};
+
+	pinctrl_pcie0_reg: pcie0reggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+		>;
+	};
+
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x166
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x06
+		>;
+	};
+
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
new file mode 100644
index 0000000000..164df627a2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVKB";
+	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
+};
+
+&i2c1 {
+	/delete-node/ pmic@4b;
+
+	pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* VDD_SOC with PCIe */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			/* VDD_GPU, VDD_VPU, VDD_DRAM */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_3V3 */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1V8, NVCC_1V8, NVCC_ENET */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_DRAM for LPDDR4 */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SNVS_1P8 */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_SNVS_0P8 */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_*_1V8 */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_0V9 */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SD2 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
new file mode 100644
index 0000000000..5027454028
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+	model = "Engicam i.Core MX8M Mini C.TOUCH 2.0";
+	compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm",
+		     "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
new file mode 100644
index 0000000000..ddac8bc7ae
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+	model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit";
+	compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm",
+		     "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
new file mode 100644
index 0000000000..def7bb5d37
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+	compatible = "engicam,icore-mx8mm", "fsl,imx8mm";
+};
+
+&A53_0 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "nxp,pf8121a";
+		reg = <0x08>;
+
+		regulators {
+			reg_ldo1: ldo1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_ldo2: ldo2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_ldo3: ldo3 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_ldo4: ldo4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck1: buck1 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck2: buck2 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck3: buck3 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck4: buck4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck5: buck5 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck6: buck6 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck7: buck7 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x196
+		>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
new file mode 100644
index 0000000000..055faae799
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ * Copyright 2022 Pengutronix
+ */
+
+/dts-v1/;
+
+#include "imx8mm-innocomm-wb15.dtsi"
+
+/ {
+	model = "InnoComm WB15-EVK";
+	compatible = "innocomm,wb15-evk", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			label = "debug";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ethphy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fec_phy_reg>;
+		regulator-name = "PHY_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			phy-supply = <&reg_ethphy>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_fec_phy: fec-phy-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec_phy_reg: fec-phy-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x16
+		>;
+	};
+
+	pinctrl_gpio_leds: led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0xd6
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
new file mode 100644
index 0000000000..299752aa82
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ */
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	reg_modem: regulator-modem {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_regulator>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "epdev_on";
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_out: regulator-3v3-out {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_OUT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <850000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <850000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// buck5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// buck6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// buck7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// buck8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	fsl,max-link-speed = <1>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4349-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_bt>;
+		device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3v3_out>;
+		vddio-supply = <&reg_3v3_out>;
+		clocks = <&osc_32k>;
+		max-speed = <3000000>;
+		clock-names = "extclk";
+	};
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x61
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x6
+		>;
+	};
+
+	pinctrl_modem_bt: modem-bt-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x19
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+			MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_modem_regulator: modem-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16    0x41
+		>;
+	};
+
+	pinctrl_pmic: pmic-irq-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x190
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x194
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x196
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
new file mode 100644
index 0000000000..8b16bd6857
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron BL i.MX8MM OSM-S (N802X S)";
+	compatible = "kontron,imx8mm-bl-osm-s", "kontron,imx8mm-osm-s", "fsl,imx8mm";
+
+	aliases {
+		ethernet1 = &usbnet;
+	};
+
+	/* fixed crystal dedicated to mcp2542fd */
+	osc_can: clock-osc-can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "osc-can";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 5000 0>;
+	};
+
+	reg_rst_eth2: regulator-rst-eth2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_eth2>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "rst-usb-eth2";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+		gpio = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb1-vbus";
+	};
+
+	reg_vdd_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vdd-5v";
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp251xfd";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		clocks = <&osc_can>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
+		/*
+		 * Limit the SPI clock to 15 MHz to prevent issues
+		 * with corrupted data due to chip errata.
+		 */
+		spi-max-frequency = <15000000>;
+		vdd-supply = <&reg_vdd_3v3>;
+		xceiver-supply = <&reg_vdd_5v>;
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eeram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rgmii-rxid";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			reset-assert-us = <1>;
+			reset-deassert-us = <15000>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out",
+			  "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	gpio-line-names = "", "", "dio4-in", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	disable-over-current;
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbnet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: cangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* PHY RST */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* ETH IRQ */
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x19
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
+		>;
+	};
+
+	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_usb_eth2: usbeth2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
new file mode 100644
index 0000000000..dcec57c203
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-kontron-sl.dtsi"
+
+/ {
+	model = "Kontron BL i.MX8MM (N801X S)";
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	aliases {
+		ethernet1 = &usbnet;
+		rtc0 = &rx8900;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* fixed crystal dedicated to mcp2515 */
+	osc_can: clock-osc-can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "osc-can";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led4 {
+			label = "led4";
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led5 {
+			label = "led5";
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led6 {
+			label = "led6";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 5000 0>;
+	};
+
+	reg_rst_eth2: regulator-rst-eth2 {
+		compatible = "regulator-fixed";
+		regulator-name = "rst-usb-eth2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_eth2>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_vdd_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can0: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		clocks = <&osc_can>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&reg_vdd_3v3>;
+		xceiver-supply = <&reg_vdd_5v>;
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rgmii-rxid";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			reset-assert-us = <1>;
+			reset-deassert-us = <15000>;
+			reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rx8900: rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbnet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio>;
+
+	pinctrl_can: cangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19 /* PHY RST */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* ETH IRQ */
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x19
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x19
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x19
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_usb_eth2: usbeth2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
new file mode 100644
index 0000000000..6e75ab879b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Kontron OSM-S i.MX8MM (N802X SOM)";
+	compatible = "kontron,imx8mm-osm-s", "fsl,imx8mm";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/*
+		 * There are multiple SoM flavors with different DDR sizes.
+		 * The smallest is 1GB. For larger sizes the bootloader will
+		 * update the reg property.
+		 */
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1e0000>;
+			};
+
+			partition@1e0000 {
+				label = "env";
+				reg = <0x1e0000 0x10000>;
+			};
+
+			partition@1f0000 {
+				label = "env_redundant";
+				reg = <0x1f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-name = "+0V8_VDD_SNVS (LDO2)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda: LDO3 {
+				regulator-name = "+1V8_VDDA (LDO3)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-name = "+0V9_VDD_PHY (LDO4)";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
+		trickle-diode-disable;
+	};
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
new file mode 100644
index 0000000000..1f8326613e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Kontron SL i.MX8MM (N801X SOM)";
+	compatible = "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*
+		 * There are multiple SoM flavors with different DDR sizes.
+		 * The smallest is 1GB. For larger sizes the bootloader will
+		 * update the reg property.
+		 */
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1e0000>;
+			};
+
+			partition@1e0000 {
+				label = "env";
+				reg = <0x1e0000 0x10000>;
+			};
+
+			partition@1f0000 {
+				label = "env_redundant";
+				reg = <0x1f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-name = "+0V8_VDD_SNVS (LDO2)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda: LDO3 {
+				regulator-name = "+1V8_VDDA (LDO3)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-name = "+0V9_VDD_PHY (LDO4)";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
new file mode 100644
index 0000000000..0b123a8401
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2021-2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+
+/ {
+	model = "MENLO MX8MM EMBEDDED DEVICE";
+	compatible = "menlo,mx8menlo",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+
+	/delete-node/ gpio-keys;
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-1 {
+			label = "TestLed601";
+			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			label = "TestLed602";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* Fixed clock dedicated to SPI CAN on carrier board */
+	clk_xtal20: clk-xtal20 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* CAN controller on the baseboard */
+	canfd: can@0 {
+		compatible = "microchip,mcp2518fd";
+		clocks = <&clk_xtal20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+	};
+
+};
+
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev@0 {
+		compatible = "menlo,m53cpld";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+
+	spidev@1 {
+		compatible = "menlo,m53cpld";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+	};
+
+};
+
+&ethphy0 {
+	max-speed = <100>;
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&flexspi {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "DISP_reset", "KBD_intI",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	/*
+	 * CPLD_D[n] is ARM_CPLD[n] in schematic
+	 * CPLD_int is SA_INTERRUPT in schematic
+	 * CPLD_reset is RESET_SOFT in schematic
+	 */
+	gpio-line-names =
+		"CPLD_D[6]", "CPLD_int", "CPLD_reset", "",
+		"", "CPLD_D[7]", "", "",
+		"", "", "", "CPLD_D[5]",
+		"CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
+		"CPLD_D[0]", "", "", "",
+		"", "", "", "",
+		"", "", "", "KBD_intK",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio_expander_21 {
+	status = "okay";
+};
+
+&hwmon {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	/* None of this is present on the SoM. */
+	/delete-node/ bridge@2c;
+	/delete-node/ hdmi@48;
+	/delete-node/ touch@4a;
+	/delete-node/ sensor@4f;
+	/delete-node/ eeprom@50;
+	/delete-node/ eeprom@57;
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_gpio7>, <&pinctrl_gpio_hog1>,
+		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
+
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3			0x1c4
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x4
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x4
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x1c4
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x1c4
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x1c4
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x1c4
+		>;
+	};
+
+	pinctrl_uart4_rts: uart4rtsgrp {
+		fsl,pins = <
+			/* SODIMM 222 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x184
+		>;
+	};
+};
+
+&pinctrl_gpio1 {
+	fsl,pins = <
+		/* SODIMM 206 */
+		MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4			0x1c4
+	>;
+};
+
+&pinctrl_gpio_hog1 {
+	fsl,pins = <
+		/* SODIMM 88 */
+		MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20			0x1c4
+		/* CPLD_int */
+		MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1				0x1c4
+		/* CPLD_reset */
+		MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2			0x1c4
+		/* SODIMM 94 */
+		MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3			0x1c4
+		/* SODIMM 96 */
+		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
+		/* CPLD_D[7] */
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
+		/* CPLD_D[6] */
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
+		/* CPLD_D[5] */
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
+		/* CPLD_D[4] */
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
+		/* CPLD_D[3] */
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
+		/* CPLD_D[2] */
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
+		/* CPLD_D[1] */
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
+		/* CPLD_D[0] */
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
+		/* KBD_intK */
+		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
+		/* DISP_reset */
+		MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22			0x1c4
+		/* KBD_intI */
+		MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23			0x1c4
+		/* SODIMM 46 */
+		MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24			0x1c4
+	>;
+};
+
+&pinctrl_uart1 {
+	fsl,pins = <
+		/* SODIMM 149 */
+		MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX			0x1c4
+		/* SODIMM 147 */
+		MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX			0x1c4
+		/* SODIMM 210 */
+		MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B			0x1c4
+		/* SODIMM 212 */
+		MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B			0x1c4
+	>;
+};
+
+&reg_usb_otg1_vbus {
+	/delete-property/ enable-active-high;
+	gpio = <&gpio1 12 GPIO_ACTIVE_LOW>;
+};
+
+&reg_usb_otg2_vbus {
+	/delete-property/ enable-active-high;
+	gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+};
+
+&sai2 {
+	status = "disabled";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-0 = <&pinctrl_uart4 &pinctrl_uart4_rts>;
+	linux,rs485-enabled-at-boot-time;
+	rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
new file mode 100644
index 0000000000..0e8f0d7161
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Boundary Devices i.MX8MMini Nitrogen8MM Rev2 board.
+ * Adrien Grassein <adrien.grassein@gmail.com.com>
+ */
+/dts-v1/;
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2";
+	compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm";
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-wm8960 {
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960>;
+		audio-routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"RINPUT1", "Mic Jack",
+			"Mic Jack", "MICB";
+		compatible = "fsl,imx-audio-wm8960";
+		/* JD2: hp detect high for headphone*/
+		hp-det-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		/* Jack is not stuffed */
+		mic-det-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		model = "wm8960-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sound_wm8960>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_buck3>;
+};
+
+/* J15 */
+&ecspi2 {
+	assigned-clocks = <&clk IMX8MM_CLK_ECSPI2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>;
+	assigned-clock-rates = <40000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			interrupts-extended = <&gpio3 16 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "nxp,pf8121a";
+		reg = <0x8>;
+
+		regulators {
+			reg_ldo1: ldo1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_ldo2: ldo2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_ldo3: ldo3 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_ldo4: ldo4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck1: buck1 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck2: buck2 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck3: buck3 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck4: buck4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck5: buck5 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck6: buck6 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck7: buck7 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9540";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c3@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rtc@68 {
+				compatible = "microcrystal,rv4162";
+				reg = <0x68>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c3a_rv4162>;
+				interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>;
+				wakeup-source;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	assigned-clocks = <&clk IMX8MM_CLK_PWM2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>;
+	assigned-clock-rates = <40000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+/* BT */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* J15 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* J9 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	sdhci-caps-mask = <0x80000000 0x0>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vref_3v3>;
+	vqmmc-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+/* sdcard */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vqmmc-supply = <&reg_ldo2>;
+	status = "okay";
+};
+
+/* wlan */
+&usdhc3 {
+	bus-width = <4>;
+	sdhci-caps-mask = <0x2 0x0>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	vqmmc-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+/* USB OTG port */
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	power-active-high;
+	status = "okay";
+};
+
+/* USB Host port */
+&usbotg2 {
+	dr_mode = "host";
+	over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	power-active-high;
+	/*
+	 * FIXME: having USB2 enabled hangs the boot just after:
+	 *[    1.655941] ci_hdrc ci_hdrc.1: EHCI Host Controller
+	 *[    1.660880] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
+	 *[    1.681505] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
+	 *[    1.687730] hub 2-0:1.0: USB hub found
+	 *[    1.691528] hub 2-0:1.0: 1 port detected
+	 */
+	status = "disabled";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x140
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x19
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x19
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x159
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x09
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3a_rv4162: i2c3a-rv4162grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x16
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x16
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x16
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x16
+		>;
+	};
+
+	pinctrl_reg_wlan_vmmc: reg-wlan-vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			/* wm8960 */
+			MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK	0xd6
+			MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC	0xd6
+			MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			/* Bluetooth PCM */
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_sound_wm8960: sound-wm8960grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x80
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x80
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140
+			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140
+			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140
+			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x16
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x156
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR	0x16
+			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC	0x15
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x141
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x03
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
new file mode 100644
index 0000000000..606a4f4d5f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Fabio Estevam <festevam@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+
+/ {
+	model = "Cloos i.MX8MM PHG board";
+	compatible = "cloos,imx8mm-phg", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "status1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "status2";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "status3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "run";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "powerled";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg_vbus_ctrl>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	panel {
+		compatible = "panel-lvds";
+		width-mm = <170>;
+		height-mm = <28>;
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <49500000>;
+			hactive = <800>;
+			hback-porch = <48>;
+			hfront-porch = <312>;
+			hsync-len = <40>;
+			vactive = <600>;
+			vback-porch = <19>;
+			vfront-porch = <61>;
+			vsync-len = <20>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_out_bridge: endpoint {
+				remote-endpoint = <&bridge_out_panel>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi83";
+		reg = <0x2c>;
+		enable-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsi_bridge>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in_dsi: endpoint {
+					remote-endpoint = <&dsi_out_bridge>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				bridge_out_panel: endpoint {
+					remote-endpoint = <&panel_out_bridge>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out_bridge: endpoint {
+				data-lanes = <1 2>;
+				lane-polarities = <1 0 0 0 0>;
+				remote-endpoint = <&bridge_in_dsi>;
+			};
+		};
+	};
+};
+
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	power-domains = <&pgc_otg1>;
+};
+
+&usbphynop2 {
+	power-domains = <&pgc_otg2>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x19
+		>;
+	};
+
+	pinctrl_dsi_bridge: dsibridgeggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3		0x19
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x14
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x14
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x14
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x14
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x90
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x90
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x90
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x90
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x14
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x90
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x10
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_otg_vbus_ctrl: otgvbusctrlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2		0x119
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
new file mode 100644
index 0000000000..92e62fe319
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Polis-i.MX8MM RDK";
+	compatible = "phytec,imx8mm-phyboard-polis-rdk",
+		     "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	bt_osc_32k: bt-lp-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "bt_osc_32k";
+		#clock-cells = <0>;
+	};
+
+	can_osc_40m: can-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		clock-output-names = "can_osc_40m";
+		#clock-cells = <0>;
+	};
+
+	fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0
+				      13000 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan>;
+		#cooling-cells = <2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_CPU;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	usdhc1_pwrseq: pwr-seq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <60>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "CAN_EN";
+		startup-delay-us = <20>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1pwrgrp>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <20000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+
+	reg_vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_3V3";
+	};
+};
+
+/* SPI - CAN MCP251XFD */
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	can0: can@0 {
+		compatible = "microchip,mcp251xfd";
+		clocks = <&can_osc_40m>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		xceiver-supply = <&reg_can_en>;
+	};
+};
+
+/* TPM */
+&ecspi2 {
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reg = <0>;
+		spi-max-frequency = <43000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "LED_RED", "WDOG_INT", "X_RTC_INT",
+		"", "", "", "RESET_ETHPHY",
+		"CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "",
+		"USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "",
+		"", "", "BT_REG_ON", "WL_REG_ON",
+		"BT_DEV_WAKE", "BT_HOST_WAKE", "", "",
+		"X_SD2_CD_B", "", "", "",
+		"", "", "", "SD2_RESET_B";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "",
+		"FAN", "miniPCIe_nPERST", "", "",
+		"COEX1", "COEX2";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "",
+		"", "ECSPI1_SS0";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* PCIe */
+&pcie0 {
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
+&rv3028 {
+	trickle-resistor-ohms = <3000>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* UART - RS232/RS485 */
+&uart1 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* UART - Sterling-LWB Bluetooth */
+&uart2 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_bt>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&bt_osc_32k>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wakeup";
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_EDGE_BOTH>;
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt>;
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		vddio-supply = <&reg_vcc_3v3>;
+	};
+};
+
+/* UART - console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	adp-disable;
+	dr_mode = "otg";
+	over-current-active-low;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+};
+
+/* SDIO - Sterling-LWB Wifi */
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	non-removable;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wlan>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x00
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x00
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x00
+		>;
+	};
+
+	pinctrl_can_en: can-engrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x00
+		>;
+	};
+
+	pinctrl_can_int: can-intgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x00
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x80
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x80
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x80
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x00
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO    0x80
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI    0x80
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK    0x80
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13      0x00
+		>;
+	};
+
+	pinctrl_fan: fan0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8	0x16
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20        0x1e2
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21        0x1e2
+		>;
+	};
+
+	pinctrl_leds: leds1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x16
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x16
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x16
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9	0x00
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x12
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19	0x12
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11      0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX	0x00
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B	0x00
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX	0x00
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B	0x00
+		>;
+	};
+
+	pinctrl_uart2_bt: uart2btgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B	0x00
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B	0x00
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX	0x00
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX	0x00
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usbotg1pwrgrp: usbotg1pwrgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x182
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0xc6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0xc6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0xc6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0xc6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0xc6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x40
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x192
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d2
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d2
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d2
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d2
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d2
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7	0x00
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
new file mode 100644
index 0000000000..6069678244
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "PHYTEC phyCORE-i.MX8MM";
+	compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	reg_vdd_3v3_s: regulator-vdd-3v3-s {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_S";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+/* Ethernet */
+&fec1 {
+	fsl,magic-packet;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			reg = <0>;
+			reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+/* SPI Flash */
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	som_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "WDOG_INT", "X_RTC_INT",
+		"", "", "", "RESET_ETHPHY",
+		"", "", "nENABLE_FLATLINK";
+};
+
+/* I2C1 */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default","gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "nxp,pf8121a";
+		reg = <0x08>;
+
+		regulators {
+			reg_nvcc_sd1: ldo1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "NVCC_SD1 (LDO1)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_nvcc_sd2: ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SD2 (LDO2)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vcc_enet: ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <1500000>;
+				regulator-name = "VCC_ENET_2V5 (LDO3)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vdda_1v8: ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1500000>;
+				regulator-name = "VDDA_1V8 (LDO4)";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-min-microvolt = <1500000>;
+					regulator-suspend-max-microvolt = <1500000>;
+				};
+			};
+
+			reg_soc_vdda_phy: buck1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <400000>;
+				regulator-name = "VDD_SOC_VDDA_PHY_0P8 (BUCK1)";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-min-microvolt = <400000>;
+					regulator-suspend-max-microvolt = <400000>;
+				};
+			};
+
+			reg_vdd_gpu_dram: buck2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "VDD_GPU_DRAM (BUCK2)";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1000000>;
+					regulator-suspend-min-microvolt = <1000000>;
+				};
+			};
+
+			reg_vdd_vpu: buck3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <400000>;
+				regulator-name = "VDD_VPU (BUCK3)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vdd_mipi: buck4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <900000>;
+				regulator-name = "VDD_MIPI_0P9 (BUCK4)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vdd_arm: buck5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <400000>;
+				regulator-name = "VDD_ARM (BUCK5)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vdd_1v8: buck6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDD_1V8 (BUCK6)";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1800000>;
+					regulator-suspend-min-microvolt = <1800000>;
+				};
+			};
+
+			reg_nvcc_dram: buck7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "NVCC_DRAM_1P1V (BUCK7)";
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SNVS_1P8 (VSNVS)";
+			};
+		};
+	};
+
+	sn65dsi83: bridge@2d {
+		compatible = "ti,sn65dsi83";
+		enable-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sn65dsi83>;
+		reg = <0x2d>;
+		status = "disabled";
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x51>;
+		vcc-supply = <&reg_vdd_3v3_s>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x52>;
+	};
+};
+
+/* EMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	status = "okay";
+};
+
+/* Watchdog */
+&wdog1 {
+	fsl,ext-reset-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x2
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x2
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x90
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x90
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x90
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x90
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x90
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x16
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x16
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x16
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x16
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x16
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x16
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x10
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c0
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x1e0
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x1e0
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
+		>;
+	};
+
+	pinctrl_sn65dsi83: sn65dsi83grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x26
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
new file mode 100644
index 0000000000..b1f11098d2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -0,0 +1,646 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017-2018 NXP
+ */
+
+#ifndef __DTS_IMX8MM_PINFUNC_H
+#define __DTS_IMX8MM_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0                                   0x028 0x290 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT          0x028 0x290 0x4C0 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K                          0x028 0x290 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1                       0x028 0x290 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_SJC_FAIL                                    0x028 0x290 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1                                   0x02C 0x294 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT                                    0x02C 0x294 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M                          0x02C 0x294 0x4BC 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2                       0x02C 0x294 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_SJC_ACTIVE                                  0x02C 0x294 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2                                   0x030 0x298 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B                                0x030 0x298 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY                              0x030 0x298 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_SJC_DE_B                                    0x030 0x298 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3                                   0x034 0x29C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT                              0x034 0x29C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0                            0x034 0x29C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK                              0x034 0x29C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_SJC_DONE                                    0x034 0x29C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4                                   0x038 0x2A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT                              0x038 0x2A0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1                            0x038 0x2A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV                           0x038 0x2A0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG                            0x038 0x2A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5                                   0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_M4_NMI                                      0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY                     0x03C 0x2A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT                       0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG                            0x03C 0x2A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6                                   0x040 0x2A8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_ENET1_MDC                                   0x040 0x2A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_USDHC1_CD_B                                 0x040 0x2A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3                       0x040 0x2A8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG                            0x040 0x2A8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7                                   0x044 0x2AC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_ENET1_MDIO                                  0x044 0x2AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_USDHC1_WP                                   0x044 0x2AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4                       0x044 0x2AC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG                            0x044 0x2AC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8                                   0x048 0x2B0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN                        0x048 0x2B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_USDHC2_RESET_B                              0x048 0x2B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT                           0x048 0x2B0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG                              0x048 0x2B0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9                                   0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT                       0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0                            0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP                           0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG                           0x04C 0x2B4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10                                  0x050 0x2B8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_USB1_OTG_ID                                 0x050 0x2B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED             0x050 0x2B8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11                                  0x054 0x2BC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_USB2_OTG_ID                                 0x054 0x2BC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY                     0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0                           0x054 0x2BC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS                    0x054 0x2BC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12                                  0x058 0x2C0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR                                0x058 0x2C0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1                            0x058 0x2C0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1                           0x058 0x2C0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0                          0x058 0x2C0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13                                  0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC                                 0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT                                    0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2                           0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1                          0x05C 0x2C4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14                                  0x060 0x2C8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR                                0x060 0x2C8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT                                    0x060 0x2C8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1                          0x060 0x2C8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2                          0x060 0x2C8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15                                  0x064 0x2CC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC                                 0x064 0x2CC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT                                    0x064 0x2CC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2                          0x064 0x2CC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB                             0x064 0x2CC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ENET_MDC_ENET1_MDC                                     0x068 0x2D0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_MDC_GPIO1_IO16                                    0x068 0x2D0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO                                   0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MM_IOMUXC_ENET_MDIO_GPIO1_IO17                                   0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3                               0x070 0x2D8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18                                    0x070 0x2D8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2                               0x074 0x2DC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK                                  0x074 0x2DC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19                                    0x074 0x2DC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1                               0x078 0x2E0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20                                    0x078 0x2E0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0                               0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21                                    0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL                         0x080 0x2E8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22                                 0x080 0x2E8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC                               0x084 0x2EC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TXC_ENET1_TX_ER                                   0x084 0x2EC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23                                    0x084 0x2EC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL                         0x088 0x2F0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RX_CTL_GPIO1_IO24                                 0x088 0x2F0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC                               0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER                                   0x08C 0x2F4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_RXC_GPIO1_IO25                                    0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0                               0x090 0x2F8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD0_GPIO1_IO26                                    0x090 0x2F8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1                               0x094 0x2FC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD1_GPIO1_IO27                                    0x094 0x2FC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2                               0x098 0x300 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD2_GPIO1_IO28                                    0x098 0x300 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3                               0x09C 0x304 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD3_GPIO1_IO29                                    0x09C 0x304 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK                                     0x0A0 0x308 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0                                      0x0A0 0x308 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4                                    0x0B0 0x318 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3                                 0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5                                    0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4                                 0x0B8 0x320 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6                                    0x0B8 0x320 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5                                 0x0BC 0x324 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7                                    0x0BC 0x324 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6                                 0x0C0 0x328 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8                                    0x0C0 0x328 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7                                 0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9                                    0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B                             0x0C8 0x330 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10                                 0x0C8 0x330 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE                               0x0CC 0x334 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11                                  0x0CC 0x334 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B                                   0x0D0 0x338 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12                                    0x0D0 0x338 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK                                     0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CLK_GPIO2_IO13                                     0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0                          0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0                               0x0D4 0x33C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD                                     0x0D8 0x340 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CMD_GPIO2_IO14                                     0x0D8 0x340 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1                          0x0D8 0x340 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1                               0x0D8 0x340 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0                                 0x0DC 0x344 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_GPIO2_IO15                                   0x0DC 0x344 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2                        0x0DC 0x344 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2                             0x0DC 0x344 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1                                 0x0E0 0x348 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_GPIO2_IO16                                   0x0E0 0x348 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT                            0x0E0 0x348 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3                             0x0E0 0x348 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2                                 0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_GPIO2_IO17                                   0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP                            0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4                             0x0E4 0x34C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3                                 0x0E8 0x350 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_GPIO2_IO18                                   0x0E8 0x350 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET                     0x0E8 0x350 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B                             0x0EC 0x354 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19                                 0x0EC 0x354 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET                  0x0EC 0x354 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_WP_USDHC2_WP                                       0x0F0 0x358 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_WP_GPIO2_IO20                                      0x0F0 0x358 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_WP_SIM_M_HMASTLOCK                                 0x0F0 0x358 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE                                   0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK                                   0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0                                     0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_ALE_SIM_M_HPROT0                                  0x0F4 0x35C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B                               0x0F8 0x360 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B                                0x0F8 0x360 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1                                   0x0F8 0x360 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_SIM_M_HPROT1                                0x0F8 0x360 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B                               0x0FC 0x364 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B                                0x0FC 0x364 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE                               0x0FC 0x364 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2                                   0x0FC 0x364 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_SIM_M_HPROT2                                0x0FC 0x364 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B                               0x100 0x368 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B                                0x100 0x368 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5                                0x100 0x368 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3                                   0x100 0x368 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_SIM_M_HPROT3                                0x100 0x368 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B                               0x104 0x36C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B                                0x104 0x36C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6                                0x104 0x36C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4                                   0x104 0x36C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_SIM_M_HADDR0                                0x104 0x36C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE                                   0x108 0x370 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK                                   0x108 0x370 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7                                  0x108 0x370 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5                                     0x108 0x370 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CLE_SIM_M_HADDR1                                  0x108 0x370 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00                             0x10C 0x374 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0                               0x10C 0x374 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6                                  0x10C 0x374 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_SIM_M_HADDR2                               0x10C 0x374 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01                             0x110 0x378 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1                               0x110 0x378 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7                                  0x110 0x378 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_SIM_M_HADDR3                               0x110 0x378 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02                             0x114 0x37C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2                               0x114 0x37C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8                                  0x114 0x37C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_SIM_M_HADDR4                               0x114 0x37C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03                             0x118 0x380 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3                               0x118 0x380 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9                                  0x118 0x380 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_SIM_M_HADDR5                               0x118 0x380 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04                             0x11C 0x384 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0                               0x11C 0x384 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0                               0x11C 0x384 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10                                 0x11C 0x384 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_SIM_M_HADDR6                               0x11C 0x384 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05                             0x120 0x388 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1                               0x120 0x388 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1                               0x120 0x388 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11                                 0x120 0x388 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_SIM_M_HADDR7                               0x120 0x388 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06                             0x124 0x38C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2                               0x124 0x38C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	                            0x124 0x38C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12                                 0x124 0x38C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_SIM_M_HADDR8                               0x124 0x38C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07                             0x128 0x390 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3                               0x128 0x390 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3                               0x128 0x390 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_GPIO3_IO13                                 0x128 0x390 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_SIM_M_HADDR9                               0x128 0x390 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DQS_RAWNAND_DQS                                   0x12C 0x394 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS                                    0x12C 0x394 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14                                    0x12C 0x394 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DQS_SIM_M_HADDR10                                 0x12C 0x394 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B                                 0x130 0x398 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_QSPI_B_DQS                                   0x130 0x398 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4                                 0x130 0x398 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15                                   0x130 0x398 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_SIM_M_HADDR11                                0x130 0x398 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B                           0x134 0x39C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B                               0x134 0x39C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16                                0x134 0x39C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_SIM_M_HADDR12                             0x134 0x39C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                 0x138 0x3A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK                                   0x138 0x3A0 0x000 0x12 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17                                   0x138 0x3A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_SIM_M_HADDR13                                0x138 0x3A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B                                 0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD                                   0x13C 0x3A4 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18                                   0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_SIM_M_HADDR14                                0x13C 0x3A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC                                 0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0                                0x140 0x3A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19                                   0x140 0x3A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_SAI5_RX_BCLK                                  0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_SAI1_TX_DATA1                                 0x144 0x3AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_PDM_CLK                                       0x144 0x3AC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20                                    0x144 0x3AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0                                0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2                                0x148 0x3B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0                                    0x148 0x3B0 0x534 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21                                   0x148 0x3B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1                                0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3                                0x14C 0x3B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC                                 0x14C 0x3B4 0x4CC 0x2 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC                                 0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1                                    0x14C 0x3B4 0x538 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22                                   0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2                                0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4                                0x150 0x3B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC                                 0x150 0x3B8 0x4CC 0x2 0x1
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                 0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2                                    0x150 0x3B8 0x53C 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23                                   0x150 0x3B8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5                                0x154 0x3BC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC                                 0x154 0x3BC 0x4CC 0x2 0x2
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0                                0x154 0x3BC 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3                                    0x154 0x3BC 0x540 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24                                   0x154 0x3BC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK                                    0x158 0x3C0 0x52C 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK                                 0x158 0x3C0 0x4C8 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI4_MCLK                                    0x158 0x3C0 0x000 0x2 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25                                   0x158 0x3C0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK                      0x158 0x3C0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC                                 0x15C 0x3C4 0x4C4 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC                                 0x15C 0x3C4 0x4E4 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK                          0x15C 0x3C4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0                                    0x15C 0x3C4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SIM_M_HADDR15                                0x15C 0x3C4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SAI1_RX_BCLK                                  0x160 0x3C8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SAI5_RX_BCLK                                  0x160 0x3C8 0x4D0 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL                           0x160 0x3C8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1                                     0x160 0x3C8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SIM_M_HADDR16                                 0x160 0x3C8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0                                0x164 0x3CC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0                                0x164 0x3CC 0x4D4 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD0_PDM_DATA0                                    0x164 0x3CC 0x534 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0                             0x164 0x3CC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2                                    0x164 0x3CC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0                       0x164 0x3CC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SIM_M_HADDR17                                0x164 0x3CC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1                                0x168 0x3D0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1                                0x168 0x3D0 0x4D8 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD1_PDM_DATA1                                    0x168 0x3D0 0x538 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1                             0x168 0x3D0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3                                    0x168 0x3D0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1                       0x168 0x3D0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SIM_M_HADDR18                                0x168 0x3D0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2                                0x16C 0x3D4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2                                0x16C 0x3D4 0x4DC 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD2_PDM_DATA2                                    0x16C 0x3D4 0x53C 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2                             0x16C 0x3D4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4                                    0x16C 0x3D4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2                       0x16C 0x3D4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SIM_M_HADDR19                                0x16C 0x3D4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3                                0x170 0x3D8 0x4E0 0x0 0x1
+#define MX8MM_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3                                0x170 0x3D8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_PDM_DATA3                                    0x170 0x3D8 0x540 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3                             0x170 0x3D8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5                                    0x170 0x3D8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3                       0x170 0x3D8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_SIM_M_HADDR20                                0x170 0x3D8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4                                0x174 0x3DC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK                                 0x174 0x3DC 0x51C 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK                                 0x174 0x3DC 0x510 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4                             0x174 0x3DC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6                                    0x174 0x3DC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4                       0x174 0x3DC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SIM_M_HADDR21                                0x174 0x3DC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5                                0x178 0x3E0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0                                0x178 0x3E0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0                                0x178 0x3E0 0x514 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC                                 0x178 0x3E0 0x4C4 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5                             0x178 0x3E0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7                                    0x178 0x3E0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5                       0x178 0x3E0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SIM_M_HADDR22                                0x178 0x3E0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6                                0x17C 0x3E4 0x520 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC                                 0x17C 0x3E4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC                                 0x17C 0x3E4 0x518 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6                             0x17C 0x3E4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8                                    0x17C 0x3E4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6                       0x17C 0x3E4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SIM_M_HADDR23                                0x17C 0x3E4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7                                0x180 0x3E8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI6_MCLK                                    0x180 0x3E8 0x530 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC                                 0x180 0x3E8 0x4CC 0x2 0x4
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4                                0x180 0x3E8 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7                             0x180 0x3E8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9                                    0x180 0x3E8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7                       0x180 0x3E8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SIM_M_HADDR24                                0x180 0x3E8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC                                 0x184 0x3EC 0x4CC 0x0 0x3
+#define MX8MM_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC                                 0x184 0x3EC 0x4EC 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO                             0x184 0x3EC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10                                   0x184 0x3EC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_SIM_M_HADDR25                                0x184 0x3EC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK                                  0x188 0x3F0 0x4C8 0x0 0x1
+#define MX8MM_IOMUXC_SAI1_TXC_SAI5_TX_BCLK                                  0x188 0x3F0 0x4E8 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI                              0x188 0x3F0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11                                    0x188 0x3F0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_SIM_M_HADDR26                                 0x188 0x3F0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0                                0x18C 0x3F4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0                                0x18C 0x3F4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8                             0x18C 0x3F4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12                                   0x18C 0x3F4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8                       0x18C 0x3F4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SIM_M_HADDR27                                0x18C 0x3F4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1                                0x190 0x3F8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1                                0x190 0x3F8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9                             0x190 0x3F8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13                                   0x190 0x3F8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9                       0x190 0x3F8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SIM_M_HADDR28                                0x190 0x3F8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2                                0x194 0x3FC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2                                0x194 0x3FC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10                            0x194 0x3FC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14                                   0x194 0x3FC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10                      0x194 0x3FC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SIM_M_HADDR29                                0x194 0x3FC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3                                0x198 0x400 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3                                0x198 0x400 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11                            0x198 0x400 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15                                   0x198 0x400 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11                      0x198 0x400 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SIM_M_HADDR30                                0x198 0x400 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4                                0x19C 0x404 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK                                 0x19C 0x404 0x510 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK                                 0x19C 0x404 0x51C 0x2 0x1
+#define MX8MM_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12                            0x19C 0x404 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16                                   0x19C 0x404 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12                      0x19C 0x404 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SIM_M_HADDR31                                0x19C 0x404 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5                                0x1A0 0x408 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0                                0x1A0 0x408 0x514 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0                                0x1A0 0x408 0x000 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13                            0x1A0 0x408 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17                                   0x1A0 0x408 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13                      0x1A0 0x408 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SIM_M_HBURST0                                0x1A0 0x408 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6                                0x1A4 0x40C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC                                 0x1A4 0x40C 0x518 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC                                 0x1A4 0x40C 0x520 0x2 0x1
+#define MX8MM_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14                            0x1A4 0x40C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18                                   0x1A4 0x40C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14                      0x1A4 0x40C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SIM_M_HBURST1                                0x1A4 0x40C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7                                0x1A8 0x410 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SAI6_MCLK                                    0x1A8 0x410 0x530 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD7_PDM_CLK                                      0x1A8 0x410 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15                            0x1A8 0x410 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19                                   0x1A8 0x410 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15                      0x1A8 0x410 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SIM_M_HBURST2                                0x1A8 0x410 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK                                    0x1AC 0x414 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI5_MCLK                                    0x1AC 0x414 0x52C 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK                                 0x1AC 0x414 0x4C8 0x2 0x2
+#define MX8MM_IOMUXC_SAI1_MCLK_PDM_CLK                                      0x1AC 0x414 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20                                   0x1AC 0x414 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP                                  0x1AC 0x414 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                 0x1B0 0x418 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX                                 0x1B0 0x418 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DTE_RX                                 0x1B0 0x418 0x4F4 0x4 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21                                   0x1B0 0x418 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0                                 0x1B0 0x418 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                  0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                  0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX                                  0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DTE_TX                                  0x1B4 0x41C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                                    0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1                                  0x1B4 0x41C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                0x1B8 0x420 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                0x1B8 0x420 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B                              0x1B8 0x420 0x4F0 0x4 0x2
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B                              0x1B8 0x420 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23                                   0x1B8 0x420 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2                                 0x1B8 0x420 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                 0x1BC 0x424 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                0x1BC 0x424 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B                              0x1BC 0x424 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B                              0x1BC 0x424 0x4F0 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24                                   0x1BC 0x424 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE                                 0x1BC 0x424 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                  0x1C0 0x428 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SAI5_TX_DATA2                                 0x1C0 0x428 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25                                    0x1C0 0x428 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT                               0x1C0 0x428 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0                                0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3                                0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26                                   0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_TPSMP_CLK                                    0x1C4 0x42C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK                                    0x1C8 0x430 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_SAI5_MCLK                                    0x1C8 0x430 0x52C 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27                                   0x1C8 0x430 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR                              0x1C8 0x430 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC                                 0x1CC 0x434 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1                                0x1CC 0x434 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC                                 0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28                                   0x1CC 0x434 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0                                0x1CC 0x434 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK                                      0x1D0 0x438 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                               0x1D0 0x438 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                               0x1D0 0x438 0x4F8 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                               0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                               0x1D4 0x43C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                0x1D8 0x440 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                 0x1D8 0x440 0x4FC 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                 0x1D8 0x440 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX                                  0x1DC 0x444 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                  0x1DC 0x444 0x4FC 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_GPT1_COMPARE3                                 0x1E0 0x448 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_SAI5_RX_DATA3                                 0x1E0 0x448 0x4E0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1                                     0x1E0 0x448 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_TPSMP_HDATA3                                  0x1E0 0x448 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK                                    0x1E4 0x44C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT                                     0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_SAI5_MCLK                                    0x1E4 0x44C 0x52C 0x2 0x3
+#define MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2                                    0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_TPSMP_HDATA4                                 0x1E4 0x44C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT                                    0x1E8 0x450 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT                                      0x1E8 0x450 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3                                     0x1E8 0x450 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_TPSMP_HDATA5                                  0x1E8 0x450 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN                                     0x1EC 0x454 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT                                      0x1EC 0x454 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4                                     0x1EC 0x454 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_TPSMP_HDATA6                                  0x1EC 0x454 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                           0x1F0 0x458 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT                                 0x1F0 0x458 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5                                0x1F0 0x458 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7                             0x1F0 0x458 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK                                0x1F4 0x45C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX                               0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX                               0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_GPIO5_IO6                                  0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8                               0x1F4 0x45C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI                                0x1F8 0x460 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX                               0x1F8 0x460 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX                               0x1F8 0x460 0x504 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7                                  0x1F8 0x460 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9                               0x1F8 0x460 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO                                0x1FC 0x464 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B                            0x1FC 0x464 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B                            0x1FC 0x464 0x500 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8                                  0x1FC 0x464 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10                              0x1FC 0x464 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_ECSPI1_SS0                                  0x200 0x468 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B                             0x200 0x468 0x500 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B                             0x200 0x468 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9                                   0x200 0x468 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11                               0x200 0x468 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK                                0x204 0x46C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX                               0x204 0x46C 0x50C 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX                               0x204 0x46C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10                                 0x204 0x46C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12                              0x204 0x46C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI                                0x208 0x470 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX                               0x208 0x470 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX                               0x208 0x470 0x50C 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11                                 0x208 0x470 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13                              0x208 0x470 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO                                0x20C 0x474 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B                            0x20C 0x474 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B                            0x20C 0x474 0x508 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12                                 0x20C 0x474 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14                              0x20C 0x474 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_ECSPI2_SS0                                  0x210 0x478 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B                             0x210 0x478 0x508 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B                             0x210 0x478 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13                                  0x210 0x478 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15                               0x210 0x478 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL                                      0x214 0x47C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_ENET1_MDC                                     0x214 0x47C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14                                    0x214 0x47C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_TPSMP_HDATA16                                 0x214 0x47C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA                                      0x218 0x480 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_ENET1_MDIO                                    0x218 0x480 0x4C0 0x1 0x2
+#define MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15                                    0x218 0x480 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_TPSMP_HDATA17                                 0x218 0x480 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL                                      0x21C 0x484 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN                          0x21C 0x484 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16                                    0x21C 0x484 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_TPSMP_HDATA18                                 0x21C 0x484 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA                                      0x220 0x488 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT                         0x220 0x488 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17                                    0x220 0x488 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_TPSMP_HDATA19                                 0x220 0x488 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL                                      0x224 0x48C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_PWM4_OUT                                      0x224 0x48C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_GPT2_CLK                                      0x224 0x48C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18                                    0x224 0x48C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_TPSMP_HDATA20                                 0x224 0x48C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA                                      0x228 0x490 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_PWM3_OUT                                      0x228 0x490 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_GPT3_CLK                                      0x228 0x490 0x000 0x2 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19                                    0x228 0x490 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_TPSMP_HDATA21                                 0x228 0x490 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL                                      0x22C 0x494 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_PWM2_OUT                                      0x22C 0x494 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B                                0x22C 0x494 0x524 0x12 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20                                    0x22C 0x494 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_TPSMP_HDATA22                                 0x22C 0x494 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA                                      0x230 0x498 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_PWM1_OUT                                      0x230 0x498 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B                                0x230 0x498 0x528 0x2 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21                                    0x230 0x498 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_TPSMP_HDATA23                                 0x230 0x498 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX                                 0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_RXD_UART1_DTE_TX                                 0x234 0x49C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK                                  0x234 0x49C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x1
+#define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX                                 0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MM_IOMUXC_UART2_RXD_UART2_DTE_TX                                 0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO                                  0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24                                   0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART2_RXD_TPSMP_HDATA26                                0x23C 0x4A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX                                 0x240 0x4A8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART2_TXD_UART2_DTE_RX                                 0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MM_IOMUXC_UART2_TXD_ECSPI3_SS0                                   0x240 0x4A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25                                   0x240 0x4A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART2_TXD_TPSMP_HDATA27                                0x240 0x4A8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX                                 0x244 0x4AC 0x504 0x0 0x2
+#define MX8MM_IOMUXC_UART3_RXD_UART3_DTE_TX                                 0x244 0x4AC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B                              0x244 0x4AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B                              0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26                                   0x244 0x4AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART3_RXD_TPSMP_HDATA28                                0x244 0x4AC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX                                 0x248 0x4B0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART3_TXD_UART3_DTE_RX                                 0x248 0x4B0 0x504 0x0 0x3
+#define MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B                              0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B                              0x248 0x4B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27                                   0x248 0x4B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART3_TXD_TPSMP_HDATA29                                0x248 0x4B0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX                                 0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MM_IOMUXC_UART4_RXD_UART4_DTE_TX                                 0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B                              0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART2_DTE_RTS_B                              0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MM_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B                               0x24C 0x4B4 0x524 0x2 0x1
+#define MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28                                   0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART4_RXD_TPSMP_HDATA30                                0x24C 0x4B4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX                                 0x250 0x4B8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART4_TXD_UART4_DTE_RX                                 0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B                              0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MM_IOMUXC_UART4_TXD_UART2_DTE_CTS_B                              0x250 0x4B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B                               0x250 0x4B8 0x528 0x2 0x1
+#define MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29                                   0x250 0x4B8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART4_TXD_TPSMP_HDATA31                                0x250 0x4B8 0x000 0x7 0x0
+
+#endif /* __DTS_IMX8MM_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
new file mode 100644
index 0000000000..1eb1fe7ebd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Protonic Holland
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Protonic PRT8MM";
+	compatible = "prt,prt8mm", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		debug-led0 {
+			label = "DEBUG_LED0";
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		debug-led1 {
+			label = "DEBUG_LED1";
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu";
+		};
+	};
+
+	sound-ssm2518 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "ssm2518-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&ssm2518>;
+			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	ssm2518: audio-codec@34 {
+		compatible = "adi,ssm2518";
+		reg = <0x34>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		regulator-name = "0V9_CORE";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <980000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf85363";
+		reg = <0x51>;
+	};
+
+	touchscreeen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_NONE>;
+		irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	temp-sense@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "host";
+	disable-over-current;
+	power-active-high;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <100000000>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: ledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x00
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x00
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400000c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400000c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400000c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK		0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_touchscreen: tsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x80
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x80
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x040
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x000
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x000
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x0d4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
new file mode 100644
index 0000000000..156d793a0c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
+	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	aliases {
+		eeprom0 = &eeprom3;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_connector>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usb_dr_connector: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+				<&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				<&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+	clock-names = "mclk";
+	clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+};
+
+&uart1 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+};
+
+&uart2 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_hub_vbus>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x00000006>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x00000006>;
+	};
+
+	pinctrl_expander: expandergrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x94>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002>,
+			   <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002>,
+			   <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x14>,
+			   <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x14>,
+			   <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x14>,
+			   <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x14>,
+			   <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x90>,
+			   <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x90>,
+			   <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x90>,
+			   <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x90>,
+			   <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x14>,
+			   <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x90>,
+			   <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x84>,
+			   <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x84>,
+			   <MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x84>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x84>,
+			   <MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14		0x84>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x40000004>,
+			   <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x40000004>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x40000004>,
+			   <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x40000004>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT		0x14>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK		0x94>,
+			   <MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0x94>,
+			   <MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0x94>,
+			   <MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0x94>,
+			   <MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0x94>,
+			   <MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0x94>,
+			   <MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0x94>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x16>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
+			   <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
+	};
+
+	pinctrl_usb1_connector: usb1-connectorgrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x84>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
new file mode 100644
index 0000000000..b4466a26d8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML";
+	compatible = "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXML_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* identical to buck4_reg, but should never change */
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXML_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&gpu_2d {
+	status = "okay";
+};
+
+&gpu_3d {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V85_SOC: 0.85 */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_0V85_GPU / DRAM / VPU */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VCC3V3 -> VMMC, ... must not be changed */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 -> RAM, ... must not be changed */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_SNVS */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_ANA */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V9_MIPI */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VCC SD IO - switched using SD2 VSELECT */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		read-only;
+		reg = <0x53>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+/*
+ * Attention:
+ * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
+ * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
+ */
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82>,
+			   <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x40000004>,
+			   <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x40000004>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x94>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x84>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d6>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x84>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
new file mode 100644
index 0000000000..d643381417
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-var-som.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8MM Symphony evaluation board";
+	compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm";
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg2_vbus>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Back";
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "Heartbeat";
+			gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ethphy {
+	reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		wakeup-source;
+
+		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
+		usb3-sata-sel-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "usb3_sata_sel";
+		};
+
+		som-vselect-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "som_vselect";
+		};
+
+		enet-sel-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "enet_sel";
+		};
+	};
+
+	extcon_usbotg1: typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5150>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	/* Capacitive touch controller */
+	ft5x06_ts: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_captouch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+/* Header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	extcon = <&extcon_usbotg1>, <&extcon_usbotg1>;
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	disable-over-current;
+	/delete-property/ usb-role-switch;
+	/*
+	 * FIXME: having USB2 enabled hangs the boot just after:
+	 * [    1.943365] ci_hdrc ci_hdrc.1: EHCI Host Controller
+	 * [    1.948287] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
+	 * [    1.971006] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
+	 * [    1.977203] hub 1-0:1.0: USB hub found
+	 * [    1.980987] hub 1-0:1.0: 1 port detected
+	 */
+	status = "disabled";
+};
+
+&pinctrl_fec1 {
+	fsl,pins = <
+		MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+		MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+		MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+		MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+		MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+		MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+		MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+		MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+		MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+		MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+		MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+		MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+		MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+		MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		/* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */
+	>;
+};
+
+&iomuxc {
+	pinctrl_captouch: captouchgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x16
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16
+		>;
+	};
+
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x16
+		>;
+	};
+
+	pinctrl_reg_usb_otg2_vbus: regusbotg2vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x16
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
new file mode 100644
index 0000000000..d7830df5b6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8MM module";
+	compatible = "variscite,var-som-mx8mm", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth_phy>;
+		regulator-name = "eth_phy_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		   <&gpio1  0 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	/* Resistive touch controller */
+	touchscreen@0 {
+		reg = <0>;
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_restouch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		spi-max-frequency = <1500000>;
+		pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+		ti,x-min = /bits/ 16 <125>;
+		touchscreen-size-x = <4008>;
+		ti,y-min = /bits/ 16 <282>;
+		touchscreen-size-y = <3864>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		touchscreen-max-pressure = <255>;
+		touchscreen-average-samples = <10>;
+		ti,debounce-tol = /bits/ 16 <3>;
+		ti,debounce-rep = /bits/ 16 <1>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+		ti,keep-vref-on;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-supply = <&reg_eth_phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	/* TODO: configure audio, as of now just put a placeholder */
+	wm8904: codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		status = "disabled";
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+/* WIFI */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x13
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x13
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x13
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x13
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x13
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x141
+		>;
+	};
+
+	pinctrl_reg_eth_phy: regethphygrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x41
+		>;
+	};
+
+	pinctrl_restouch: restouchgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX	0x140
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
new file mode 100644
index 0000000000..de7f67a4ff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@16 {
+				gw,mode = <4>;
+				reg = <0x16>;
+				label = "fan_tach";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_adc1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_adc2";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_dram";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_1p2";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_1p0";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_0p95";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p8";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+
+		fan-controller@0 {
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+
+	pmic@69 {
+		compatible = "mps,mp5416";
+		reg = <0x69>;
+
+		regulators {
+			/* vdd_0p95: DRAM/GPU/VPU */
+			buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microamp = <3800000>;
+				regulator-max-microamp = <6800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_soc */
+			buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microamp = <2200000>;
+				regulator-max-microamp = <5200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_arm */
+			buck3_reg: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microamp = <3800000>;
+				regulator-max-microamp = <6800000>;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <2200000>;
+				regulator-max-microamp = <5200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_0p9 */
+			ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x19
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts
new file mode 100644
index 0000000000..3f88c4ad57
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw71xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW71xx-0x i.MX8MM Development Kit";
+	compatible = "gw,imx8mm-gw71xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
new file mode 100644
index 0000000000..0ce60ad9c7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "pci_usb_sel", "dio0",
+		"", "dio1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "dio2", "dio3", "", "", "pci_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x40000041 /* DIO2 */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x40000041 /* DIO2 */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
new file mode 100644
index 0000000000..4eaf8aabcb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			imx8mm_mipi_csi_out: endpoint {
+				remote-endpoint = <&csi_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso
new file mode 100644
index 0000000000..e0768d408c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
new file mode 100644
index 0000000000..f6ad1a4b8b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS232 with RTS/CTS hardware flow control:
+ *  - GPIO4_0 rs485_en needs to be driven low (in-active)
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_en";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
new file mode 100644
index 0000000000..c3cd9f2b0d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS422 (RS485 full duplex):
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be low
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
new file mode 100644
index 0000000000..cc0a287226
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS485 HD:
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven high (active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be pulled high
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
new file mode 100644
index 0000000000..641be3af98
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw72xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW72xx-0x i.MX8MM Development Kit";
+	compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
new file mode 100644
index 0000000000..570992a52b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		ethernet1 = &eth1;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+		"", "", "pci_usb_sel", "dio0",
+		"", "dio1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+		"mipi_gpio1", "", "", "pci_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pcie@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie@2,3 {
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth1: pcie@5,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x40000104 /* RS485_TERM */
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x40000104 /* RS485 */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x40000104 /* RS485_HALF */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x41
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
new file mode 100644
index 0000000000..f3ece4b7fb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			imx8mm_mipi_csi_out: endpoint {
+				remote-endpoint = <&csi_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso
new file mode 100644
index 0000000000..e0768d408c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
new file mode 100644
index 0000000000..1f8ea20dfa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW73xx RS232 with RTS/CTS hardware flow control:
+ *  - GPIO4_0 rs485_en needs to be driven low (in-active)
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_en";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
new file mode 100644
index 0000000000..3e6404340d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ *
+ * GW73xx RS422 (RS485 full duplex):
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be low
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
new file mode 100644
index 0000000000..2c71ab9854
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ *
+ * GW73xx RS485 HD:
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven high (active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be pulled high
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts
new file mode 100644
index 0000000000..6905437ff2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw73xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW73xx-0x i.MX8MM Development Kit";
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
new file mode 100644
index 0000000000..1800c6a4b1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		ethernet1 = &eth1;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+		"", "", "pci_usb_sel", "dio0",
+		"", "dio1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+		"mipi_gpio1", "", "", "pci_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pcie@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie@2,4 {
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth1: pcie@6,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
+	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x40000104 /* RS485_TERM */
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x40000104 /* RS485 */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x40000104 /* RS485_HALF */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x41
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x41
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x140
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
new file mode 100644
index 0000000000..ed46d4f3e6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -0,0 +1,1181 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7901 i.MX8MM board";
+	compatible = "gw,imx8mm-gw7901", "fsl,imx8mm";
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		ethernet3 = &lan3;
+		ethernet4 = &lan4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led01_red";
+			gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led02_red";
+			gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led03_red";
+			gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led04_red";
+			gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led05_red";
+			gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-a {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	regulator-ioexp {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_ioexp>;
+		compatible = "regulator-fixed";
+		regulator-name = "ioexp";
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	regulator-isouart {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_isouart>;
+		compatible = "regulator-fixed";
+		regulator-name = "iso_uart";
+		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_usb2_vbus";
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wifi";
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		status = "okay";
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
+		"", "uart1_rs232#", "dig1_in", "dig1_out",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+		"", "", "uart3_rs232#", "uart3_rs422#",
+		"uart3_rs485#", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
+		"", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpu_2d {
+	status = "disabled";
+};
+
+&gpu_3d {
+	status = "disabled";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin_aux1";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vin_aux2";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_0p95";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_arm";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p2";
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	leds_gpio: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9897";
+		reg = <0x5f>;
+		pinctrl-0 = <&pinctrl_ksz>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		phy-mode = "rgmii-id";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan3: port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan4: port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&fec1>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	crypto@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	status = "disabled";
+};
+
+&pgc_gpumix {
+	status = "disabled";
+};
+
+&pgc_mipi {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+	rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
+	cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	over-current-active-low;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* DIG2_OUT */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* DIG2_IN */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* DIG1_IN */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIG1_OUT */
+			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x40000041 /* SIM2DET# */
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29	0x40000041 /* SIM1DET# */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000041 /* SIM2SEL */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_ksz: kszgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18	0x41
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19	0x41 /* RST# */
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x40000041 /* WDIS# */
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x41
+		>;
+	};
+
+	pinctrl_reg_isouart: regisouartgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041
+		>;
+	};
+
+	pinctrl_reg_ioexp: regioexpgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x40000041
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x41
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17	0x140
+			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC	0x140
+		>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x140
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x140
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x140
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x140
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x140
+		>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x40000041 /* RS422# */
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x40000041 /* RS485# */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x40000041 /* RS232# */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9	0x140
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10	0x140
+		>;
+	};
+
+	pinctrl_uart3_gpio: uart3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x40000110 /* RS232# */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000110 /* RS422# */
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8	0x40000110 /* RS485# */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x140
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x140
+		>;
+	};
+
+	pinctrl_uart4_gpio: uart4gpiogrp {
+		fsl,pins = <
+
+			MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x40000041 /* RS422# */
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* RS485# */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
new file mode 100644
index 0000000000..b318c2d080
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -0,0 +1,1079 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7902 i.MX8MM board";
+	compatible = "gw,imx8mm-gw7902", "fsl,imx8mm";
+
+	aliases {
+		ethernet1 = &eth1;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	can20m: can20m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "can20m";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel1";
+			gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel2";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel3";
+			gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel4";
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel5";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb_usb1_vbus";
+		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		regulator-name = "wifi";
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&can20m>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"uart2_en#", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
+		"lte_pwr#", "lte_rst", "lte_int", "",
+		"amp_gpio4", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
+		"", "uart1_term", "uart1_half", "app_gpio2",
+		"mipi_gpio1", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "mipi_gpio4",
+		"mipi_gpio3", "mipi_gpio2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vin_4p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* off-board header */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth1: pcie@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			local-mac-address = [00 00 00 00 00 00];
+		};
+	};
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* RS232/RS485/RS422 selectable */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+	rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* RS232 console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	rts-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18       0x40000041 /* LTE_INT */
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17       0x40000041 /* LTE_RST# */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16       0x40000041 /* LTE_PWR */
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x40000041 /* AMP GPIO1 */
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x40000041 /* AMP GPIO2 */
+			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11	0x40000041 /* AMP GPIO3 */
+			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20	0x40000041 /* AMP_GPIO4 */
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000041 /* MIPI_GPIO2 */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* MIPI_GPIO3/PWM2 */
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* MIPI_GPIO4/PWM3 */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
+			MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23	0x19
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x19
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x19
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x19
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x141 /* PPS */
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41 /* WLAN_WLON */
+		>;
+	};
+
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK	0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC	0xd6
+		>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40
+			MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3	0x140 /* CAN_IRQ# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x82
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x40 /* SS0 */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10	0x140 /* RTS */
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24	0x140 /* CTS */
+		>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x40000110 /* HALF */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25	0x40000110 /* TERM */
+			MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23	0x40000110 /* RS485 */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3_gpio: uart3_gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41 /* BT_EN# */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x140 /* CTS */
+			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1		0x140 /* RTS */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1		0x140 /* CTS */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x140 /* RTS */
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x140 /* DTR */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x140 /* DSR */
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x140 /* DCD */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x140 /* RI */
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x140 /* GNSS_PPS */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x141 /* GNSS_GASP */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
new file mode 100644
index 0000000000..0e102a12bc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -0,0 +1,871 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7903 i.MX8MM board";
+	compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
+
+	aliases {
+		ethernet0 = &fec1;
+		usb0 = &usbotg1;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led01_red";
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led02_red";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led03_red";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led04_red";
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led05_red";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-a {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			rx-internal-delay-ps = <2000>;
+			tx-internal-delay-ps = <2500>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "rs422_en#", "rs485_en#", "rs232_en#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "",
+		"dig1_out#", "dig1_in", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "", "", "", "sim1_det#",
+		"sim2_det#", "sim2_sel", "", "", "pci_wdis#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
+&pgc_mipi {
+	status = "disabled";
+};
+
+/* off-board RS232/RS485/RS422 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	cts-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x40000041 /* RS422# */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000041 /* RS485# */
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x40000041 /* DIG1_IN */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* DIG1_OUT */
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40000041 /* DIG1_CTL */
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2	0x40000041 /* DIG2_CTL */
+			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x40000041 /* DIG2_IN */
+			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1		0x40000041 /* DIG2_OUT */
+			MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7	0x40000041 /* SIM1DET# */
+			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x40000041 /* SIM2DET# */
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40000041 /* SIM2SEL */
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x40000041 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x19
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x19
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x19
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x19
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29	0x19
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x19
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x19
+			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x19
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x140
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x140
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x140
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x140
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
new file mode 100644
index 0000000000..6afbabc89c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
@@ -0,0 +1,921 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7904 i.MX8MM board";
+	compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-1 {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-2 {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-3 {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-4 {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&gpioled 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led01_yel";
+			gpios = <&gpioled 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&gpioled 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led02_yel";
+			gpios = <&gpioled 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&gpioled 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led03_yel";
+			gpios = <&gpioled 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&gpioled 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led04_yel";
+			gpios = <&gpioled 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&gpioled 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led05_yel";
+			gpios = <&gpioled 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-11 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led07_grn";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-13 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led07_red";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-14 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led08_grn";
+			gpios = <&gpioled 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-15 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led08_yel";
+			gpios = <&gpioled 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-16 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led09_grn";
+			gpios = <&gpioled 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-17 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led09_yel";
+			gpios = <&gpioled 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-18 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led10_grn";
+			gpios = <&gpioled 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-19 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led10_yel";
+			gpios = <&gpioled 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "rs232_en#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "pci_wdis#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gpioled: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
+&pgc_mipi {
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	cts-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x40000041 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000019
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26	0x140 /* CTS# in */
+			MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27	0x140 /* RTS# out */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts
new file mode 100644
index 0000000000..914753f062
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw7905.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7905-0x i.MX8MM Development Kit";
+	compatible = "gateworks,imx8mm-gw7905-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+/* Disable SOM interfaces not used on baseboard */
+&fec1 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi
new file mode 100644
index 0000000000..5eb9200519
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "SD2_3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "gpioa", "gpiob", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "pci_usb_sel",
+		"", "", "", "pci_wdis#",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"gpioc", "gpiod", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* USB1 - Type C front panel SINK port J14 */
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/* USB2 4-port USB3.0 HUB:
+ *  P1 - USBC connector (host only)
+ *  P2 - USB2 test connector
+ *  P3 - miniPCIe full card
+ *  P4 - miniPCIe half card
+ */
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000040 /* GPIOA */
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x40000040 /* GPIOB */
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x40000106 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000106 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000040 /* GPIOD */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000040 /* GPIOC */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x6	/* LEDG */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x106
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x6	/* USBHUB_RST# (ext p/u) */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x140
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x140
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x140
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
new file mode 100644
index 0000000000..1cff0b8293
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	sound_card: sound-card {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mm-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		AVDD-supply = <&reg_3p3v>;
+		clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+		clock-names = "mclk";
+		CPVDD-supply = <&reg_3p3v>;
+		DBVDD-supply = <&reg_3p3v>;
+		DCVDD-supply = <&reg_3p3v>;
+		MICVDD-supply = <&reg_3p3v>;
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
new file mode 100644
index 0000000000..3c4b8ca125
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	sound_card: sound-card {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mm-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&gpio_expander_21 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver */
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Limit frequency on dev board due to long traces and bad signal integrity */
+&usdhc2 {
+	max-frequency = <100000000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts
new file mode 100644
index 0000000000..d64ff378a1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Dahlia Board";
+	compatible = "toradex,verdin-imx8mm-nonwifi-dahlia",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts
new file mode 100644
index 0000000000..6ae71ecac8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mm-nonwifi-dev",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts
new file mode 100644
index 0000000000..c71825ecf2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Yavia Board";
+	compatible = "toradex,verdin-imx8mm-nonwifi-yavia",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi
new file mode 100644
index 0000000000..1e0f87c7a6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+&gpio3 {
+	gpio-line-names = "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_64",
+			  "SODIMM_21",
+			  "SODIMM_206",
+			  "SODIMM_76",
+			  "SODIMM_56",
+			  "SODIMM_58",
+			  "SODIMM_60",
+			  "SODIMM_62",
+			  "SODIMM_162",
+			  "SODIMM_164",
+			  "SODIMM_166",
+			  "SODIMM_168",
+			  "SODIMM_66",
+			  "SODIMM_17",
+			  "",
+			  "SODIMM_156",
+			  "SODIMM_160",
+			  "SODIMM_244",
+			  "",
+			  "SODIMM_48",
+			  "SODIMM_44",
+			  "SODIMM_42",
+			  "SODIMM_46";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_102",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_100",
+			  "SODIMM_148",
+			  "SODIMM_152",
+			  "SODIMM_154",
+			  "SODIMM_174",
+			  "SODIMM_120",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_108",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_150",
+			  "SODIMM_118",
+			  "",
+			  "SODIMM_88",
+			  "SODIMM_149",
+			  "SODIMM_147",
+			  "SODIMM_36",
+			  "SODIMM_32",
+			  "SODIMM_30",
+			  "SODIMM_34",
+			  "SODIMM_38",
+			  "SODIMM_252",
+			  "SODIMM_133",
+			  "SODIMM_135",
+			  "SODIMM_129";
+};
+
+&usdhc3 {
+	bus-width = <4>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts
new file mode 100644
index 0000000000..d424c475cb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Dahlia Board";
+	compatible = "toradex,verdin-imx8mm-wifi-dahlia",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts
new file mode 100644
index 0000000000..ef95202183
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mm-wifi-dev",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts
new file mode 100644
index 0000000000..fe39de9310
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Yavia Board";
+	compatible = "toradex,verdin-imx8mm-wifi-yavia",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
new file mode 100644
index 0000000000..017db9eab2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "PDn_AW-CM276NF";
+		startup-delay-us = <2000>;
+	};
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_64",
+			  "SODIMM_21",
+			  "SODIMM_206",
+			  "SODIMM_76",
+			  "SODIMM_56",
+			  "SODIMM_58",
+			  "SODIMM_60",
+			  "SODIMM_62",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_66",
+			  "SODIMM_17",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_244",
+			  "",
+			  "SODIMM_48",
+			  "SODIMM_44",
+			  "SODIMM_42",
+			  "SODIMM_46";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_102",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_100",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_120",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_108",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "",
+			  "SODIMM_118",
+			  "",
+			  "SODIMM_88",
+			  "SODIMM_149",
+			  "SODIMM_147",
+			  "SODIMM_36",
+			  "SODIMM_32",
+			  "SODIMM_30",
+			  "SODIMM_34",
+			  "SODIMM_38",
+			  "SODIMM_252",
+			  "SODIMM_133",
+			  "SODIMM_135",
+			  "SODIMM_129";
+};
+
+/* On-module Wi-Fi */
+&usdhc3 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi
new file mode 100644
index 0000000000..1e28c78e38
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_yavia>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin yavia board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios_ext_yavia>;
+};
+
+&hwmon_temp {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds_yavia: ledsyaviagrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0		0x106	/* SODIMM 52 */
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x106	/* SODIMM 54 */
+			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x106	/* SODIMM 56 */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x106	/* SODIMM 58 */
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x106	/* SODIMM 60 */
+			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9	0x106	/* SODIMM 62 */
+		>;
+	};
+
+	pinctrl_gpios_ext_yavia: gpiosextyaviagrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x106	/* SODIMM 64 */
+			MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x106	/* SODIMM 66 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
new file mode 100644
index 0000000000..6f08115871
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -0,0 +1,1319 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		/* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
+		power-supply = <&reg_3p3v>;
+		/* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
+		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	/* Fixed clock dedicated to SPI CAN controller */
+	clk40m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+			gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c2>;
+		/* Verdin PWM_3_DSI (SODIMM 19) */
+		hpd-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		label = "hdmi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm_3_dsi_hpd_gpio>;
+		type = "a";
+		status = "disabled";
+	};
+
+	panel_lvds: panel-lvds {
+		compatible = "panel-lvds";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		status = "disabled";
+	};
+
+	/* Carrier Board Supplies */
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "+V5_SW";
+	};
+
+	/* Non PMIC On-module Supplies */
+	reg_ethphy: regulator-ethphy {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
+		off-on-delay-us = <500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "On-module +V3.3_ETH";
+		startup-delay-us = <200000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_1_EN (SODIMM 155) */
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_1_EN";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_2_EN (SODIMM 185) */
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_2_EN";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin SD_1_PWR_EN (SODIMM 76) */
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SD";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Use the kernel configuration settings instead */
+		/delete-node/ linux,cma;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+};
+
+/* Verdin CAN_1 (On-module) */
+&ecspi3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	can1: can@0 {
+		compatible = "microchip,mcp251xfd";
+		clocks = <&clk40m>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can1_int>;
+		reg = <0>;
+		spi-max-frequency = <8500000>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&fec1 {
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_ethphy>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_216",
+			  "SODIMM_19",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_220",
+			  "SODIMM_222",
+			  "",
+			  "SODIMM_218",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_185",
+			  "SODIMM_187";
+};
+
+&gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_84",
+			  "SODIMM_78",
+			  "SODIMM_74",
+			  "SODIMM_80",
+			  "SODIMM_82",
+			  "SODIMM_70",
+			  "SODIMM_72";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_131",
+			  "",
+			  "SODIMM_91",
+			  "SODIMM_16",
+			  "SODIMM_15",
+			  "SODIMM_208",
+			  "SODIMM_137",
+			  "SODIMM_139",
+			  "SODIMM_141",
+			  "SODIMM_143",
+			  "SODIMM_196",
+			  "SODIMM_200",
+			  "SODIMM_198",
+			  "SODIMM_202",
+			  "",
+			  "",
+			  "SODIMM_55",
+			  "SODIMM_53",
+			  "SODIMM_95",
+			  "SODIMM_93",
+			  "SODIMM_14",
+			  "SODIMM_12",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_210",
+			  "SODIMM_212",
+			  "SODIMM_151",
+			  "SODIMM_153";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
+};
+
+/* On-module I2C */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		interrupt-parent = <&gpio1>;
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x25>;
+
+		/*
+		 * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC
+		 * behind this PMIC.
+		 */
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "On-module +VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "On-module +VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)";
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "On-module +V3.3 (BUCK4)";
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "PWR_1V8_MOCI (BUCK5)";
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "On-module +VDD_DDR (BUCK6)";
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V1.8_SNVS (LDO1)";
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <800000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "On-module +V0.8_SNVS (LDO2)";
+			};
+
+			reg_vdda: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V1.8A (LDO3)";
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <900000>;
+				regulator-name = "On-module +V0.9_MIPI (LDO4)";
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
+			};
+		};
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Verdin I2C_1 (ADC_4 - ADC_3) */
+		channel@0 {
+			reg = <0>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_4 - ADC_1) */
+		channel@1 {
+			reg = <1>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_3 - ADC_1) */
+		channel@2 {
+			reg = <2>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_2 - ADC_1) */
+		channel@3 {
+			reg = <3>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_4 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_3 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_1 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	clock-frequency = <10000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+};
+
+/* Verdin I2C_3_HDMI N/A */
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	gpio_expander_21: gpio-expander@21 {
+		compatible = "nxp,pcal6416";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x21>;
+		vcc-supply = <&reg_3p3v>;
+		status = "disabled";
+	};
+
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
+		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
+		reg = <0x2c>;
+		status = "disabled";
+	};
+
+	/* Current measurement into module VCC */
+	hwmon: hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+		status = "disabled";
+	};
+
+	hdmi_lontium_lt8912: hdmi@48 {
+		compatible = "lontium,lt8912b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
+		reg = <0x48>;
+		/* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	atmel_mxt_ts: touch@4a {
+		compatible = "atmel,maxtouch";
+		/*
+		 * Verdin GPIO_9_DSI
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
+		 */
+		interrupt-parent = <&gpio3>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
+		reg = <0x4a>;
+		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	/* Temperature sensor on carrier board */
+	hwmon_temp: sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+		status = "disabled";
+	};
+
+	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
+	eeprom_display_adapter: eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+		status = "disabled";
+	};
+
+	/* EEPROM on carrier board */
+	eeprom_carrier_board: eeprom@57 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x57>;
+		status = "disabled";
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	/* PCIE_1_RESET# (SODIMM 244) */
+	reset-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_1>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_2>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_3>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+	#sound-dai-cells = <0>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+};
+
+/*
+ * Verdin UART_4
+ * Resource allocated to M4 by default, must not be accessed from Cortex-A35 or you get an OOPS
+ */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	dr_mode = "host";
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+};
+
+&usbphynop1 {
+	vcc-supply = <&reg_vdd_3v3>;
+};
+
+&usbphynop2 {
+	power-domains = <&pgc_otg2>;
+	vcc-supply = <&reg_vdd_3v3>;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+};
+
+&wdog1 {
+	fsl,ext-reset-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
+		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
+		    <&pinctrl_pmic_tpm_ena>;
+
+	pinctrl_can1_int: can1intgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x146>;	/* CAN_1_SPI_INT#_1.8V */
+	};
+
+	pinctrl_can2_int: can2intgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x106>;	/* CAN_2_SPI_INT#_1.8V, unused */
+	};
+
+	pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x106>;	/* SODIMM 256 */
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x6>,	/* SODIMM 198 */
+			<MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x6>,	/* SODIMM 200 */
+			<MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x6>,	/* SODIMM 196 */
+			<MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x6>;	/* SODIMM 202 */
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x146>,	/* CAN_2_SPI_CS#_1.8V */
+			<MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x6>,	/* CAN_SPI_SCK_1.8V */
+			<MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x6>,	/* CAN_SPI_MOSI_1.8V */
+			<MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x6>,	/* CAN_SPI_MISO_1.8V */
+			<MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x6>;	/* CAN_1_SPI_CS_1.8V# */
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
+			<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3>,
+			<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91>,
+			<MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91>,
+			<MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91>,
+			<MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91>,
+			<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91>,
+			<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f>,
+			<MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f>,
+			<MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f>,
+			<MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x146>;
+	};
+
+	pinctrl_fec1_sleep: fec1-sleepgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
+			<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3>,
+			<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91>,
+			<MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91>,
+			<MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91>,
+			<MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91>,
+			<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91>,
+			<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18		0x1f>,
+			<MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23		0x1f>,
+			<MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22		0x1f>,
+			<MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x106>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x106>,	/* SODIMM 52 */
+			<MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x106>,	/* SODIMM 54 */
+			<MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B		0x106>,	/* SODIMM 64 */
+			<MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x106>,	/* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x106>,	/* SODIMM 58 */
+			<MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x106>,	/* SODIMM 60 */
+			<MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x106>,	/* SODIMM 62 */
+			<MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS		0x106>;	/* SODIMM 66 */
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x106>;	/* SODIMM 206 */
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5		0x106>;	/* SODIMM 208 */
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26		0x106>;	/* SODIMM 210 */
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27		0x106>;	/* SODIMM 212 */
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x106>;	/* SODIMM 216 */
+	};
+
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x106>;	/* SODIMM 218 */
+	};
+
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x106>;	/* SODIMM 220 */
+	};
+
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x106>;	/* SODIMM 222 */
+	};
+
+	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
+	pinctrl_gpio_9_dsi: gpio9dsigrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+	};
+
+	/* Verdin GPIO_10_DSI (pulled-up as active-low) */
+	pinctrl_gpio_10_dsi: gpio10dsigrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x146>;	/* SODIMM 21 */
+	};
+
+	pinctrl_gpio_hog1: gpiohog1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x106>,	/* SODIMM 88 */
+			<MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1		0x106>,	/* SODIMM 90 */
+			<MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x106>,	/* SODIMM 92 */
+			<MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3		0x106>,	/* SODIMM 94 */
+			<MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x106>,	/* SODIMM 96 */
+			<MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x106>,	/* SODIMM 100 */
+			<MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x106>,	/* SODIMM 102 */
+			<MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11		0x106>,	/* SODIMM 104 */
+			<MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x106>,	/* SODIMM 106 */
+			<MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13		0x106>,	/* SODIMM 108 */
+			<MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x106>,	/* SODIMM 112 */
+			<MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x106>,	/* SODIMM 114 */
+			<MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x106>,	/* SODIMM 116 */
+			<MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x106>,	/* SODIMM 118 */
+			<MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x106>;	/* SODIMM 120 */
+	};
+
+	pinctrl_gpio_hog2: gpiohog2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x106>;	/* SODIMM 91 */
+	};
+
+	pinctrl_gpio_hog3: gpiohog3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x146>,	/* SODIMM 157 */
+			<MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x146>;	/* SODIMM 187 */
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x146>;	/* SODIMM 252 */
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000146>,	/* PMIC_I2C_SCL */
+			<MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000146>;	/* PMIC_I2C_SDA */
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x146>,	/* PMIC_I2C_SCL */
+			<MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x146>;	/* PMIC_I2C_SDA */
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000146>,	/* SODIMM 55 */
+			<MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000146>;	/* SODIMM 53 */
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x146>,	/* SODIMM 55 */
+			<MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x146>;	/* SODIMM 53 */
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000146>,	/* SODIMM 95 */
+			<MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000146>;	/* SODIMM 93 */
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x146>,	/* SODIMM 95 */
+			<MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x146>;	/* SODIMM 93 */
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000146>,	/* SODIMM 14 */
+			<MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000146>;	/* SODIMM 12 */
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x146>,	/* SODIMM 14 */
+			<MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x146>;	/* SODIMM 12 */
+	};
+
+	/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
+	pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x6>;	/* SODIMM 42 */
+	};
+
+	/* Verdin I2S_2_D_OUT shared with SAI5 */
+	pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x6>;	/* SODIMM 46 */
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x6>,	/* SODIMM 244 */
+			/* PMIC_EN_PCIe_CLK, unused */
+			<MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x6>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141>;	/* PMIC_INT# */
+	};
+
+	/* Verdin PWM_3_DSI shared with GPIO1_IO1 */
+	pinctrl_pwm_1: pwm1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT		0x6>;	/* SODIMM 19 */
+	};
+
+	pinctrl_pwm_2: pwm2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x6>;	/* SODIMM 15 */
+	};
+
+	pinctrl_pwm_3: pwm3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT			0x6>;	/* SODIMM 16 */
+	};
+
+	/* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM1_OUT */
+	pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsihpdgpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x106>;	/* SODIMM 19 */
+	};
+
+	pinctrl_reg_eth: regethgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_WP_GPIO2_IO20			0x146>;	/* PMIC_EN_ETH */
+	};
+
+	pinctrl_reg_usb1_en: regusb1engrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x106>;	/* SODIMM 155 */
+	};
+
+	pinctrl_reg_usb2_en: regusb2engrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x106>;	/* SODIMM 185 */
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0x6>,	/* SODIMM 38 */
+			<MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0x6>,	/* SODIMM 30 */
+			<MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0x6>,	/* SODIMM 32 */
+			<MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0x6>,	/* SODIMM 36 */
+			<MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0x6>;	/* SODIMM 34 */
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0		0x6>,	/* SODIMM 48 */
+			<MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC		0x6>,	/* SODIMM 44 */
+			<MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK		0x6>,	/* SODIMM 42 */
+			<MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0		0x6>;	/* SODIMM 46 */
+	};
+
+	/* control signal for optional ATTPM20P or SE050 */
+	pinctrl_pmic_tpm_ena: pmictpmenagrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x106>;	/* PMIC_TPM_ENA */
+	};
+
+	pinctrl_tsp: tspgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x6>,	/* SODIMM 148 */
+			<MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x6>,	/* SODIMM 152 */
+			<MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x6>,	/* SODIMM 154 */
+			<MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x146>,	/* SODIMM 174 */
+			<MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x6>;	/* SODIMM 150 */
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x146>,	/* SODIMM 147 */
+			<MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x146>;	/* SODIMM 149 */
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x146>,	/* SODIMM 133 */
+			<MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x146>,	/* SODIMM 135 */
+			<MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x146>,	/* SODIMM 131 */
+			<MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x146>;	/* SODIMM 129 */
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x146>,	/* SODIMM 141 */
+			<MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x146>,	/* SODIMM 139 */
+			<MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x146>,	/* SODIMM 137 */
+			<MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x146>;	/* SODIMM 143 */
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x146>,	/* SODIMM 151 */
+			<MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x146>;	/* SODIMM 153 */
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190>,
+			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0>,
+			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
+			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194>,
+			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4>,
+			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
+			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196>,
+			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6>,
+			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
+			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x6>;	/* SODIMM 84 */
+	};
+
+	pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x0>;	/* SODIMM 84 */
+	};
+
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x6>;	/* SODIMM 76 */
+	};
+
+	/*
+	 * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
+	 * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
+	 */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x90>,	/* SODIMM 78 */
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x90>,	/* SODIMM 74 */
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x90>,	/* SODIMM 80 */
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x90>,	/* SODIMM 82 */
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x90>,	/* SODIMM 70 */
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x90>;	/* SODIMM 72 */
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x94>,
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x94>,
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x94>,
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x94>,
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x94>,
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x94>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x96>,
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x96>,
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x96>,
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x96>,
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x96>,
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x96>;
+	};
+
+	/* Avoid backfeeding with removed card power */
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x0>,
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x0>,
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x0>,
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0>,
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0>,
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0>,
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0>;
+	};
+
+	/*
+	 * On-module Wi-Fi/BT or type specific SDHC interface
+	 * (e.g. on X52 extension slot of Verdin Development Board)
+	 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x150>,
+			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x150>,
+			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x150>,
+			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x150>,
+			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x150>,
+			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x150>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x154>,
+			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x154>,
+			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x154>,
+			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x154>,
+			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x154>,
+			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x154>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x156>,
+			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x156>,
+			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x156>,
+			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x156>,
+			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x156>,
+			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x156>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x166>;	/* PMIC_WDI */
+	};
+
+	pinctrl_wifi_ctrl: wifictrlgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x46>,	/* WIFI_WKUP_BT */
+			<MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x146>,	/* WIFI_W_WKUP_HOST */
+			<MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x46>;	/* WIFI_WKUP_WLAN */
+	};
+
+	pinctrl_wifi_i2s: bti2sgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK		0x6>,	/* WIFI_TX_BCLK */
+			<MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0		0x6>,	/* WIFI_TX_DATA0 */
+			<MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC		0x6>,	/* WIFI_TX_SYNC */
+			<MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0		0x6>;	/* WIFI_RX_DATA0 */
+	};
+
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x6>;	/* PMIC_EN_WIFI */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
new file mode 100644
index 0000000000..54faf83cb4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -0,0 +1,1490 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mm-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0xe>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0xc>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	usbphynop1: usbphynop1 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
+	};
+
+	usbphynop2: usbphynop2 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+		power-domains = <&pgc_otg2>;
+	};
+
+	soc: soc@0 {
+		compatible = "fsl,imx8mm-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+		nvmem-cells = <&imx8mm_uid>;
+		nvmem-cell-names = "soc_unique_id";
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30000000 0x30000000 0x400000>;
+
+			spba2: spba-bus@30000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30000000 0x100000>;
+				ranges;
+
+				sai1: sai@30010000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30010000 0x10000>;
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+						 <&clk IMX8MM_CLK_SAI1_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@30020000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30020000 0x10000>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+						<&clk IMX8MM_CLK_SAI2_ROOT>,
+						<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@30030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30030000 0x10000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+						 <&clk IMX8MM_CLK_SAI3_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai5: sai@30050000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30050000 0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+						 <&clk IMX8MM_CLK_SAI5_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai6: sai@30060000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30060000 0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+						 <&clk IMX8MM_CLK_SAI6_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				micfil: audio-controller@30080000 {
+					compatible = "fsl,imx8mm-micfil";
+					reg = <0x30080000 0x10000>;
+					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+						 <&clk IMX8MM_CLK_PDM_ROOT>,
+						 <&clk IMX8MM_AUDIO_PLL1_OUT>,
+						 <&clk IMX8MM_AUDIO_PLL2_OUT>,
+						 <&clk IMX8MM_CLK_EXT3>;
+					clock-names = "ipg_clk", "ipg_clk_app",
+						      "pll8k", "pll11k", "clkext3";
+					dmas = <&sdma2 24 25 0x80000000>;
+					dma-names = "rx";
+					#sound-dai-cells = <0>;
+					status = "disabled";
+				};
+
+				spdif1: spdif@30090000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x30090000 0x10000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+						 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+						 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+						 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+						 <&clk IMX8MM_CLK_DUMMY>; /* spba */
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 87 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
+				#thermal-sensor-cells = <0>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MM_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma3: dma-controller@302b0000 {
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
+				 <&clk IMX8MM_CLK_SDMA3_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mm-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: syscon@30340000 {
+				compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mm-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
+				/* For nvmem subnodes */
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mm_uid: unique-id@4 { /* 0x410-0x420 */
+					reg = <0x4 0x8>;
+				};
+
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
+					reg = <0x10 4>;
+				};
+
+				tmu_calib: calib@3c { /* 0x4f0 */
+					reg = <0x3c 4>;
+				};
+
+				fec_mac_address: mac-address@90 { /* 0x640 */
+					reg = <0x90 6>;
+				};
+			};
+
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mm-anatop";
+				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx8mm-snvs-lpgpr",
+						     "fsl,imx7d-snvs-lpgpr";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mm-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
+						<&clk IMX8MM_CLK_A53_CORE>,
+						<&clk IMX8MM_CLK_NOC>,
+						<&clk IMX8MM_CLK_AUDIO_AHB>,
+						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
+						<&clk IMX8MM_SYS_PLL3>,
+						<&clk IMX8MM_VIDEO_PLL1>,
+						<&clk IMX8MM_AUDIO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+							 <&clk IMX8MM_ARM_PLL_OUT>,
+							 <&clk IMX8MM_SYS_PLL3_OUT>,
+							 <&clk IMX8MM_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>, <0>, <0>,
+							<400000000>,
+							<400000000>,
+							<750000000>,
+							<594000000>,
+							<393216000>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mm-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MM_CLK_USB_BUS>;
+						assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
+					};
+
+					pgc_pcie: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_PCIE>;
+						power-domains = <&pgc_hsiomix>;
+						clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
+					};
+
+					pgc_otg1: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
+					};
+
+					pgc_otg2: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
+					};
+
+					pgc_gpumix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MM_CLK_GPU_AHB>;
+						assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
+								  <&clk IMX8MM_CLK_GPU_AHB>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+									 <&clk IMX8MM_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>, <400000000>;
+					};
+
+					pgc_gpu: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPU>;
+						clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+							 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MM_CLK_GPU2D_ROOT>,
+							 <&clk IMX8MM_CLK_GPU3D_ROOT>;
+						resets = <&src IMX8MQ_RESET_GPU_RESET>;
+						power-domains = <&pgc_gpumix>;
+					};
+
+					pgc_vpumix: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+						assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
+					};
+
+					pgc_vpu_g1: power-domain@7 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
+					};
+
+					pgc_vpu_g2: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
+					};
+
+					pgc_vpu_h1: power-domain@9 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
+					};
+
+					pgc_dispmix: power-domain@10 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+							 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+						assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
+								  <&clk IMX8MM_CLK_DISP_APB>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
+									 <&clk IMX8MM_SYS_PLL1_800M>;
+						assigned-clock-rates = <500000000>, <200000000>;
+					};
+
+					pgc_mipi: power-domain@11 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_MIPI>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30400000 0x30400000 0x400000>;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
+					<&clk IMX8MM_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
+					 <&clk IMX8MM_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
+					 <&clk IMX8MM_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
+					 <&clk IMX8MM_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30800000 0x30800000 0x400000>,
+				 <0x8000000 0x8000000 0x10000000>;
+
+			spba1: spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
+
+				ecspi1: spi@30820000 {
+					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@30830000 {
+					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@30840000 {
+					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+						 <&clk IMX8MM_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+						 <&clk IMX8MM_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+						 <&clk IMX8MM_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_AHB>,
+					 <&clk IMX8MM_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
+					 <&clk IMX8MM_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			flexspi: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
+					 <&clk IMX8MM_CLK_QSPI_ROOT>;
+				clock-names = "fspi_en", "fspi";
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MM_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
+					 <&clk IMX8MM_CLK_ENET1_ROOT>,
+					 <&clk IMX8MM_CLK_ENET_TIMER>,
+					 <&clk IMX8MM_CLK_ENET_REF>,
+					 <&clk IMX8MM_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
+						  <&clk IMX8MM_CLK_ENET_TIMER>,
+						  <&clk IMX8MM_CLK_ENET_REF>,
+						  <&clk IMX8MM_CLK_ENET_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+							 <&clk IMX8MM_SYS_PLL2_100M>,
+							 <&clk IMX8MM_SYS_PLL2_125M>,
+							 <&clk IMX8MM_SYS_PLL2_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&fec_mac_address>;
+				nvmem-cell-names = "mac-address";
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x32c00000 0x32c00000 0x400000>;
+
+			lcdif: lcdif@32e00000 {
+				compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x32e00000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+						  <&clk IMX8MM_CLK_DISP_AXI>,
+						  <&clk IMX8MM_CLK_DISP_APB>;
+				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MM_SYS_PLL2_1000M>,
+							 <&clk IMX8MM_SYS_PLL1_800M>;
+				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif>;
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e10000 {
+				compatible = "fsl,imx8mm-mipi-dsim";
+				reg = <0x32e10000 0x400>;
+				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+							 <&clk IMX8MM_CLK_24M>;
+				assigned-clock-rates = <266000000>, <24000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_dsim>;
+						};
+					};
+				};
+			};
+
+			csi: csi@32e20000 {
+				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
+				reg = <0x32e20000 0x1000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
+				status = "disabled";
+
+				port {
+					csi_in: endpoint {
+						remote-endpoint = <&imx8mm_mipi_csi_out>;
+					};
+				};
+			};
+
+			disp_blk_ctrl: blk-ctrl@32e28000 {
+				compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
+				reg = <0x32e28000 0x100>;
+				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+						<&pgc_dispmix>, <&pgc_mipi>,
+						<&pgc_mipi>;
+				power-domain-names = "bus", "csi-bridge",
+						     "lcdif", "mipi-dsi",
+						     "mipi-csi";
+				clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_ROOT>,
+					 <&clk IMX8MM_CLK_DSI_CORE>,
+					 <&clk IMX8MM_CLK_DSI_PHY_REF>,
+					 <&clk IMX8MM_CLK_CSI1_CORE>,
+					 <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+				clock-names = "csi-bridge-axi","csi-bridge-apb",
+					      "csi-bridge-core", "lcdif-axi",
+					      "lcdif-apb", "lcdif-pix",
+					      "dsi-pclk", "dsi-ref",
+					      "csi-aclk", "csi-pclk";
+				#power-domain-cells = <1>;
+			};
+
+			mipi_csi: mipi-csi@32e30000 {
+				compatible = "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e30000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;
+
+				clock-frequency = <333000000>;
+				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						imx8mm_mipi_csi_out: endpoint {
+							remote-endpoint = <&csi_in>;
+						};
+					};
+				};
+			};
+
+			usbotg1: usb@32e40000 {
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x32e40000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
+				phys = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_hsiomix>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@32e40200 {
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e40200 0x200>;
+			};
+
+			usbotg2: usb@32e50000 {
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x32e50000 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
+				phys = <&usbphynop2>;
+				fsl,usbmisc = <&usbmisc2 0>;
+				power-domains = <&pgc_hsiomix>;
+				status = "disabled";
+			};
+
+			usbmisc2: usbmisc@32e50200 {
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e50200 0x200>;
+			};
+
+			pcie_phy: pcie-phy@32f00000 {
+				compatible = "fsl,imx8mm-pcie-phy";
+				reg = <0x32f00000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+				clock-names = "ref";
+				assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+				assigned-clock-rates = <100000000>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
+				resets = <&src IMX8MQ_RESET_PCIEPHY>;
+				reset-names = "pciephy";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dma_apbh: dma-controller@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: nand-controller@33002000 {
+			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
+				 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		pcie0: pcie@33800000 {
+			compatible = "fsl,imx8mm-pcie";
+			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MM_CLK_PCIE1_PHY>,
+				 <&clk IMX8MM_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mm-pcie-ep";
+			reg = <0x33800000 0x400000>,
+			      <0x18000000 0x8000000>;
+			reg-names = "dbi", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			fsl,max-link-speed = <2>;
+			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MM_CLK_PCIE1_PHY>,
+				 <&clk IMX8MM_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
+		gpu_3d: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x8000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+				 <&clk IMX8MM_CLK_GPU3D_ROOT>,
+				 <&clk IMX8MM_CLK_GPU3D_ROOT>;
+			clock-names = "reg", "bus", "core", "shader";
+			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+					  <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-rates = <0>, <800000000>;
+			power-domains = <&pgc_gpu>;
+		};
+
+		gpu_2d: gpu@38008000 {
+			compatible = "vivante,gc";
+			reg = <0x38008000 0x8000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+				 <&clk IMX8MM_CLK_GPU2D_ROOT>;
+			clock-names = "reg", "bus", "core";
+			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+					  <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-rates = <0>, <800000000>;
+			power-domains = <&pgc_gpu>;
+		};
+
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mm-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+		};
+
+		vpu_blk_ctrl: blk-ctrl@38330000 {
+			compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
+			reg = <0x38330000 0x100>;
+			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+					<&pgc_vpu_g2>, <&pgc_vpu_h1>;
+			power-domain-names = "bus", "g1", "g2", "h1";
+			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+			clock-names = "g1", "g2", "h1";
+			assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+					  <&clk IMX8MM_CLK_VPU_G2>;
+			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+						 <&clk IMX8MM_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>,
+					       <600000000>;
+			#power-domain-cells = <1>;
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>, /* GIC Dist */
+			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+				 <&clk IMX8MM_DRAM_PLL>,
+				 <&clk IMX8MM_CLK_DRAM_ALT>,
+				 <&clk IMX8MM_CLK_DRAM_APB>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
new file mode 100644
index 0000000000..16761975f5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led3>;
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_camera: regulator-camera {
+		compatible = "regulator-fixed";
+		regulator-name = "mipi_pwr";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-wm8962 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8962";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Microphone", "Headset Mic",
+					    "Speaker", "Speaker";
+		simple-audio-card,routing = "Headphones", "HPOUTL",
+					    "Headphones", "HPOUTR",
+					    "Speaker", "SPKOUTL",
+					    "Speaker", "SPKOUTR",
+					    "Headset Mic", "MICBIAS",
+					    "IN3R", "Headset Mic";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8962>;
+			clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "microchip,at25160bn", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <32>;
+		size = <2048>;
+		address-width = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	camera@10 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x10>;
+		clocks = <&clk IMX8MN_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MN_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		AVDD-supply = <&reg_camera>;  /* 2.8v */
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pca6416_0: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&isi {
+	status = "okay";
+};
+
+&easrc {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x41
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
+		>;
+	};
+
+	pinctrl_reg_usb_otg: reg-otggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
+			MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+			MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x40
+			MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x40
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
new file mode 100644
index 0000000000..35b8d2060c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-beacon-som.dtsi"
+#include "imx8mn-beacon-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8M Nano Development Kit";
+	compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	reg_hdmi: regulator-hdmi-dvdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		regulator-name = "hdmi_pwr_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+		regulator-always-on;
+	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-hdmi";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+};
+
+&i2c2 {
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_bridge>;
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&reg_hdmi>;
+		a2vdd-supply = <&reg_hdmi>;
+		dvdd-supply = <&reg_hdmi>;
+		pvdd-supply = <&reg_hdmi>;
+		v1p2-supply = <&reg_hdmi>;
+		v3p3-supply = <&reg_hdmi>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <20000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hdmi_bridge: hdmibridgegrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_reg_hdmi: reghdmigrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11              0x16
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0	0xd6
+			MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK	0xd6
+			MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC	0xd6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
new file mode 100644
index 0000000000..90073b1653
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+		spi0 = &flexspi;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc1_gpio>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+/* DDR controller is running LPDDR at 800MHz which requires 0.95V */
+&a53_opp_table {
+	opp-1200000000 {
+		opp-microvolt = <950000>;
+	};
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&buck6_reg>;
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		max-speed = <4000000>;
+		clock-names = "extclk";
+	};
+};
+
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&buck4_reg>;
+	vqmmc-supply = <&buck5_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+			MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
+			MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7	0x19
+			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x19
+			MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9		0x111
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
new file mode 100644
index 0000000000..22a754d438
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	fec_supply: fec-supply-en {
+		compatible = "regulator-fixed";
+		vin-supply = <&buck4_reg>;
+		regulator-name = "tja1101_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_pwrseq: usdhc2-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwrseq>;
+		reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&fec_supply>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <2000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	bd71847: pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				/* PMIC_BUCK1 - VDD_SOC */
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				/* PMIC_BUCK2 - VDD_ARM */
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3_reg: BUCK3 {
+				/* PMIC_BUCK5 - VDD_DRAM_VPU_GPU */
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				/* PMIC_BUCK6 - VDD_3V3 */
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				/* PMIC_BUCK7 - VDD_1V8 */
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				/* PMIC_BUCK8 - NVCC_DRAM */
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				/* PMIC_LDO1 - NVCC_SNVS_1V8 */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				/* PMIC_LDO2 - VDD_SNVS_0V8 */
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				/* PMIC_LDO3 - VDDA_1V8 */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				/* PMIC_LDO4 - VDD_MIPI_0V9 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* PMIC_LDO6 - VDD_MIPI_1V2 */
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bluetooth>;
+		shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
+};
+
+/* Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bluetooth: bluetoothgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x044	/* BT_REG_ON */
+			MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18		0x046	/* BT_DEV_WAKE */
+			MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28		0x090	/* BT_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x082
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x082
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x082
+			MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x040
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC			0x002
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x002
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x090
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x090
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER		0x090
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x016
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x016
+			MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x016
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x016
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x090
+			MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER		0x016
+			MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12		0x150	/* RMII_INT - ENET_INT */
+			MX8MN_IOMUXC_SD2_WP_GPIO2_IO20			0x150	/* RMII_EN - ENET_EN */
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x016	/* RMII_WAKE - GPIO_ENET_WAKE */
+			MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29		0x016	/* RMII_RESET - GPIO_ENET_RST */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL			0x400000c2
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA			0x400000c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL			0x400000c2
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA			0x400000c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL			0x400000c2
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA			0x400000c2
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x040
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX		0x040
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX		0x040
+			MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX		0x040
+			MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x040
+			MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x040
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX		0x040
+			MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x090
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x094
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x096
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0d6
+		>;
+	};
+
+	pinctrl_usdhc2_pwrseq: usdhc2pwrseqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x040	/* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x046
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x0d6	/* GPIO_0 - WIFI_GPIO_0 */
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x0d6	/* GPIO_1 - WIFI_GPIO_1 */
+			MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4		0x0d6	/* BT_GPIO_5 - WIFI_GPIO_5 */
+			MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4			0x0d6	/* I2S_CLK - WIFI_GPIO_6 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
new file mode 100644
index 0000000000..7acc5a960d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-bsh-smm-s2-common.dtsi"
+
+/ {
+	model = "BSH SMM S2";
+	compatible = "bsh,imx8mn-bsh-smm-s2", "fsl,imx8mn";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x10000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE		0x00000096
+			MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B		0x00000096
+			MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE		0x00000096
+			MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00		0x00000096
+			MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01		0x00000096
+			MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02		0x00000096
+			MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03		0x00000096
+			MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04		0x00000096
+			MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05		0x00000096
+			MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06		0x00000096
+			MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07		0x00000096
+			MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B		0x00000096
+			MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B	0x00000056
+			MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B		0x00000096
+			MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B		0x00000096
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
new file mode 100644
index 0000000000..c6ad65becc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-bsh-smm-s2-common.dtsi"
+#include <dt-bindings/sound/tlv320aic31xx.h>
+
+/ {
+	model = "BSH SMM S2 PRO";
+	compatible = "bsh,imx8mn-bsh-smm-s2pro", "fsl,imx8mn";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+
+	sound-tlv320aic31xx {
+		compatible = "fsl,imx-audio-tlv320aic31xx";
+		model = "tlv320aic31xx-hifi";
+		audio-cpu = <&sai3>;
+		audio-codec = <&tlv320dac3101>;
+		audio-asrc = <&easrc>;
+		audio-routing =
+			"Ext Spk", "SPL",
+			"Ext Spk", "SPR";
+		mclk-id = <PLL_CLKIN_BCLK>;
+	};
+
+	vdd_input: vdd_input {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_input";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&easrc {
+	fsl,asrc-rate = <48000>;
+	fsl,asrc-format = <10>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tlv320dac3101: audio-codec@18 {
+		compatible = "ti,tlv320dac3101";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dac_rst>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&buck4_reg>;
+		SPRVDD-supply = <&vdd_input>;
+		SPLVDD-supply = <&vdd_input>;
+		AVDD-supply = <&buck4_reg>;
+		IOVDD-supply = <&buck4_reg>;
+		DVDD-supply = <&buck5_reg>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		ai31xx-micbias-vg = <MICBIAS_AVDDV>;
+		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dac_rst: dacrstgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19 /* DAC_RST */
+		>;
+	};
+
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x082
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x082
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x082
+			MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x040
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL			0x400000c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000090
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d0
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x0d0
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x0d0
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x0d0
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x0d0
+			MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x0d0
+			MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x0d0
+			MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x0d0
+			MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x0d0
+			MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x090
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000094
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d4
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x0d4
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x0d4
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x0d4
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x0d4
+			MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x0d4
+			MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x0d4
+			MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x0d4
+			MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x0d4
+			MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x094
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000096
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d6
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x0d6
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x0d6
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x0d6
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x0d6
+			MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x0d6
+			MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x0d6
+			MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x0d6
+			MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x0d6
+			MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x096
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
new file mode 100644
index 0000000000..000e2c0596
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NXP i.MX8MNano DDR3L EVK board";
+	compatible = "fsl,imx8mn-ddr3l-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	cpu-supply = <&buck1>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck1>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck1>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck1>;
+};
+
+&i2c1 {
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450b";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC_0V9";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V35";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "VDD_SNVS_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_PHY_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
new file mode 100644
index 0000000000..cc2ff59ac5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+
+/ {
+	model = "NXP i.MX8MNano DDR4 EVK board";
+	compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
+&i2c1 {
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
new file mode 100644
index 0000000000..0b71f50d93
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NXP i.MX8MNano EVK board";
+	compatible = "fsl,imx8mn-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450b";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <750000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDD_ARM_0V9";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "VDD_SNVS_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_PHY_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
new file mode 100644
index 0000000000..0e60995a57
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "yellow:status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
+		enable-active-high;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+		linux,autosuspend-period = <125>;
+	};
+
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	wm8524: audio-codec {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_wlf>;
+		wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+		clock-names = "mclk";
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
+	sound-wm8524 {
+		compatible = "fsl,imx-audio-wm8524";
+		model = "wm8524-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8524>;
+		audio-asrc = <&easrc>;
+		audio-routing =
+			"Line Out Jack", "LINEVOUTL",
+			"Line Out Jack", "LINEVOUTR";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif1>;
+		spdif-out;
+		spdif-in;
+	};
+};
+
+&easrc {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <166000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+
+		};
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_camera>;
+		clocks = <&clk IMX8MN_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MN_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mn_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			imx8mn_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7533_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MN_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbphynop1 {
+	wakeup-source;
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_gpio_wlf: gpiowlfgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21	0xd6
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13              0x4f
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x1c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x1c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x1c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+		>;
+	};
+
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x140
+			MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x140
+			MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x140
+			MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h
new file mode 100644
index 0000000000..faf1e69e74
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h
@@ -0,0 +1,646 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#ifndef __DTS_IMX8MN_PINFUNC_H
+#define __DTS_IMX8MN_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2                        0x020 0x25C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL                                       0x020 0x25C 0x55C 0x1 0x3
+#define MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3                        0x024 0x260 0x000 0x0 0x0
+#define MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA                                       0x024 0x260 0x56C 0x1 0x3
+#define MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0                                      0x028 0x290 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT             0x028 0x290 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K                             0x028 0x290 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1                          0x028 0x290 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1                                      0x02C 0x294 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT                                       0x02C 0x294 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M                             0x02C 0x294 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2                          0x02C 0x294 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO02_GPIO1_IO2                                      0x030 0x298 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B                                   0x030 0x298 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY                                 0x030 0x298 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3                                      0x034 0x29C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_USDHC1_VSELECT                                 0x034 0x29C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0                               0x034 0x29C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK                                 0x034 0x29C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4                                      0x038 0x2A0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT                                 0x038 0x2A0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1                               0x038 0x2A0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV                              0x038 0x2A0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5                                      0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_M4_NMI                                         0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY                        0x03C 0x2A4 0x4BC 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT                          0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6                                      0x040 0x2A8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_ENET1_MDC                                      0x040 0x2A8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_USDHC1_CD_B                                    0x040 0x2A8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3                          0x040 0x2A8 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7                                      0x044 0x2AC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_ENET1_MDIO                                     0x044 0x2AC 0x4C0 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_USDHC1_WP                                      0x044 0x2AC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4                          0x044 0x2AC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8                                      0x048 0x2B0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN                           0x048 0x2B0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_PWM1_OUT                                       0x048 0x2B0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_USDHC2_RESET_B                                 0x048 0x2B0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT                              0x048 0x2B0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9                                      0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT                          0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_PWM2_OUT                                       0x04C 0x2B4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_USDHC3_RESET_B                                 0x04C 0x2B4 0x000 0x4 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0                               0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP                              0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10                                     0x050 0x2B8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID                                    0x050 0x2B8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO10_PWM3_OUT                                       0x050 0x2B8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11                                     0x054 0x2BC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_PWM2_OUT                                       0x054 0x2BC 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_USDHC3_VSELECT                                 0x054 0x2BC 0x000 0x4 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY                        0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0                              0x054 0x2BC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12                                     0x058 0x2C0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR                                   0x058 0x2C0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1                               0x058 0x2C0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1                              0x058 0x2C0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13                                     0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC                                    0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_PWM2_OUT                                       0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2                              0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14                                     0x060 0x2C8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO14_USDHC3_CD_B                                    0x060 0x2C8 0x598 0x4 0x2
+#define MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT                                       0x060 0x2C8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1                             0x060 0x2C8 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15                                     0x064 0x2CC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO15_USDHC3_WP                                      0x064 0x2CC 0x5B8 0x4 0x2
+#define MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT                                       0x064 0x2CC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2                             0x064 0x2CC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_ENET_MDC_ENET1_MDC                                        0x068 0x2D0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_MDC_SAI6_TX_DATA0                                    0x068 0x2D0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_MDC_PDM_BIT_STREAM3                                  0x068 0x2D0 0x540 0x3 0x1
+#define MX8MN_IOMUXC_ENET_MDC_SPDIF1_OUT                                       0x068 0x2D0 0x000 0x4 0x0
+#define MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16                                       0x068 0x2D0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_MDC_USDHC3_STROBE                                    0x068 0x2D0 0x59C 0x6 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO                                      0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_SAI6_TX_SYNC                                    0x06C 0x2D4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_MDIO_PDM_BIT_STREAM2                                 0x06C 0x2D4 0x53C 0x3 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_SPDIF1_IN                                       0x06C 0x2D4 0x5CC 0x4 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17                                      0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_MDIO_USDHC3_DATA5                                    0x06C 0x2D4 0x550 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3                                  0x070 0x2D8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD3_SAI6_TX_BCLK                                     0x070 0x2D8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD3_PDM_BIT_STREAM1                                  0x070 0x2D8 0x538 0x3 0x1
+#define MX8MN_IOMUXC_ENET_TD3_SPDIF1_EXT_CLK                                   0x070 0x2D8 0x568 0x4 0x1
+#define MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18                                       0x070 0x2D8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD3_USDHC3_DATA6                                     0x070 0x2D8 0x584 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2                                  0x074 0x2DC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK                                     0x074 0x2DC 0x5A4 0x1 0x0
+#define MX8MN_IOMUXC_ENET_TD2_CCMSRCGPCMIX_ENET_REF_CLK_ROOT                   0x074 0x2DC 0x5A4 0x1 0x0
+#define MX8MN_IOMUXC_ENET_TD2_SAI6_RX_DATA0                                    0x074 0x2DC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD2_PDM_BIT_STREAM3                                  0x074 0x2DC 0x540 0x3 0x2
+#define MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19                                       0x074 0x2DC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD2_USDHC3_DATA7                                     0x074 0x2DC 0x54C 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1                                  0x078 0x2E0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD1_SAI6_RX_SYNC                                     0x078 0x2E0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD1_PDM_BIT_STREAM2                                  0x078 0x2E0 0x53C 0x3 0x2
+#define MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20                                       0x078 0x2E0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD1_USDHC3_CD_B                                      0x078 0x2E0 0x598 0x6 0x3
+#define MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0                                  0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD0_SAI6_RX_BCLK                                     0x07C 0x2E4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD0_PDM_BIT_STREAM1                                  0x07C 0x2E4 0x538 0x3 0x2
+#define MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21                                       0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD0_USDHC3_WP                                        0x07C 0x2E4 0x5B8 0x6 0x3
+#define MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL                            0x080 0x2E8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TX_CTL_SAI6_MCLK                                     0x080 0x2E8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22                                    0x080 0x2E8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TX_CTL_USDHC3_DATA0                                  0x080 0x2E8 0x5B4 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC                                  0x084 0x2EC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER                                      0x084 0x2EC 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ENET_TXC_SAI7_TX_DATA0                                    0x084 0x2EC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23                                       0x084 0x2EC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TXC_USDHC3_DATA1                                     0x084 0x2EC 0x5B0 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL                            0x088 0x2F0 0x574 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RX_CTL_SAI7_TX_SYNC                                  0x088 0x2F0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RX_CTL_PDM_BIT_STREAM3                               0x088 0x2F0 0x540 0x3 0x3
+#define MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24                                    0x088 0x2F0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RX_CTL_USDHC3_DATA2                                  0x088 0x2F0 0x5E4 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC                                  0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER                                      0x08C 0x2F4 0x5C8 0x1 0x0
+#define MX8MN_IOMUXC_ENET_RXC_SAI7_TX_BCLK                                     0x08C 0x2F4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RXC_PDM_BIT_STREAM2                                  0x08C 0x2F4 0x53C 0x3 0x3
+#define MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25                                       0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RXC_USDHC3_DATA3                                     0x08C 0x2F4 0x5E0 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0                                  0x090 0x2F8 0x57C 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD0_SAI7_RX_DATA0                                    0x090 0x2F8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD0_PDM_BIT_STREAM1                                  0x090 0x2F8 0x538 0x3 0x3
+#define MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26                                       0x090 0x2F8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD0_USDHC3_DATA4                                     0x090 0x2F8 0x558 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1                                  0x094 0x2FC 0x554 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD1_SAI7_RX_SYNC                                     0x094 0x2FC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD1_PDM_BIT_STREAM0                                  0x094 0x2FC 0x534 0x3 0x1
+#define MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27                                       0x094 0x2FC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD1_USDHC3_RESET_B                                   0x094 0x2FC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2                                  0x098 0x300 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD2_SAI7_RX_BCLK                                     0x098 0x300 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD2_PDM_CLK                                          0x098 0x300 0x000 0x3 0x0
+#define MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28                                       0x098 0x300 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD2_USDHC3_CLK                                       0x098 0x300 0x5A0 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3                                  0x09C 0x304 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD3_SAI7_MCLK                                        0x09C 0x304 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD3_SPDIF1_IN                                        0x09C 0x304 0x5CC 0x3 0x5
+#define MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29                                       0x09C 0x304 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD3_USDHC3_CMD                                       0x09C 0x304 0x5DC 0x6 0x1
+#define MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK                                        0x0A0 0x308 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_CLK_ENET1_MDC                                         0x0A0 0x308 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_CLK_UART1_DCE_TX                                      0x0A0 0x308 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_CLK_UART1_DTE_RX                                      0x0A0 0x308 0x4F4 0x4 0x4
+#define MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0                                         0x0A0 0x308 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD                                        0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_CMD_ENET1_MDIO                                        0x0A4 0x30C 0x4C0 0x1 0x3
+#define MX8MN_IOMUXC_SD1_CMD_UART1_DCE_RX                                      0x0A4 0x30C 0x4F4 0x4 0x5
+#define MX8MN_IOMUXC_SD1_CMD_UART1_DTE_TX                                      0x0A4 0x30C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1                                         0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0                                    0x0A8 0x310 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_ENET1_RGMII_TD1                                 0x0A8 0x310 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_UART1_DCE_RTS_B                                 0x0A8 0x310 0x4F0 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA0_UART1_DTE_CTS_B                                 0x0A8 0x310 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_GPIO2_IO2                                       0x0A8 0x310 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1                                    0x0AC 0x314 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_ENET1_RGMII_TD0                                 0x0AC 0x314 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_UART1_DCE_CTS_B                                 0x0AC 0x314 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_UART1_DTE_RTS_B                                 0x0AC 0x314 0x4F0 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3                                       0x0AC 0x314 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2                                    0x0B0 0x318 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA2_ENET1_RGMII_RD0                                 0x0B0 0x318 0x57C 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA2_UART2_DCE_TX                                    0x0B0 0x318 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA2_UART2_DTE_RX                                    0x0B0 0x318 0x4FC 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA2_GPIO2_IO4                                       0x0B0 0x318 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3                                    0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA3_ENET1_RGMII_RD1                                 0x0B4 0x31C 0x554 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA3_UART2_DCE_RX                                    0x0B4 0x31C 0x4FC 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA3_UART2_DTE_TX                                    0x0B4 0x31C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA3_GPIO2_IO5                                       0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4                                    0x0B8 0x320 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_ENET1_RGMII_TX_CTL                              0x0B8 0x320 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_I2C1_SCL                                        0x0B8 0x320 0x55C 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA4_UART2_DCE_RTS_B                                 0x0B8 0x320 0x4F8 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA4_UART2_DTE_CTS_B                                 0x0B8 0x320 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6                                       0x0B8 0x320 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5                                    0x0BC 0x324 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_ENET1_TX_ER                                     0x0BC 0x324 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_I2C1_SDA                                        0x0BC 0x324 0x56C 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA5_UART2_DCE_CTS_B                                 0x0BC 0x324 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_UART2_DTE_RTS_B                                 0x0BC 0x324 0x4F8 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7                                       0x0BC 0x324 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6                                    0x0C0 0x328 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA6_ENET1_RGMII_RX_CTL                              0x0C0 0x328 0x574 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA6_I2C2_SCL                                        0x0C0 0x328 0x5D0 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA6_UART3_DCE_TX                                    0x0C0 0x328 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA6_UART3_DTE_RX                                    0x0C0 0x328 0x504 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8                                       0x0C0 0x328 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7                                    0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA7_ENET1_RX_ER                                     0x0C4 0x32C 0x5C8 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA7_I2C2_SDA                                        0x0C4 0x32C 0x560 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA7_UART3_DCE_RX                                    0x0C4 0x32C 0x504 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA7_UART3_DTE_TX                                    0x0C4 0x32C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9                                       0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_USDHC1_RESET_B                                0x0C8 0x330 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_ENET1_TX_CLK                                  0x0C8 0x330 0x5A4 0x1 0x1
+#define MX8MN_IOMUXC_SD1_RESET_B_CCMSRCGPCMIX_ENET_REF_CLK_ROOT                0x0C8 0x330 0x5A4 0x1 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_I2C3_SCL                                      0x0C8 0x330 0x588 0x3 0x1
+#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DCE_RTS_B                               0x0C8 0x330 0x500 0x4 0x2
+#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DTE_CTS_B                               0x0C8 0x330 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10                                    0x0C8 0x330 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE                                  0x0CC 0x334 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_STROBE_I2C3_SDA                                       0x0CC 0x334 0x5BC 0x3 0x1
+#define MX8MN_IOMUXC_SD1_STROBE_UART3_DCE_CTS_B                                0x0CC 0x334 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_STROBE_UART3_DTE_RTS_B                                0x0CC 0x334 0x500 0x4 0x3
+#define MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11                                     0x0CC 0x334 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B                                      0x0D0 0x338 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12                                       0x0D0 0x338 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CD_B_CCMSRCGPCMIX_TESTER_ACK                          0x0D0 0x338 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK                                        0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_CLK_SAI5_RX_SYNC                                      0x0D4 0x33C 0x4E4 0x1 0x1
+#define MX8MN_IOMUXC_SD2_CLK_ECSPI2_SCLK                                       0x0D4 0x33C 0x580 0x2 0x1
+#define MX8MN_IOMUXC_SD2_CLK_UART4_DCE_RX                                      0x0D4 0x33C 0x50C 0x3 0x4
+#define MX8MN_IOMUXC_SD2_CLK_UART4_DTE_TX                                      0x0D4 0x33C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_CLK_SAI5_MCLK                                         0x0D4 0x33C 0x594 0x4 0x1
+#define MX8MN_IOMUXC_SD2_CLK_GPIO2_IO13                                        0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0                             0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD                                        0x0D8 0x340 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_CMD_SAI5_RX_BCLK                                      0x0D8 0x340 0x4D0 0x1 0x1
+#define MX8MN_IOMUXC_SD2_CMD_ECSPI2_MOSI                                       0x0D8 0x340 0x590 0x2 0x1
+#define MX8MN_IOMUXC_SD2_CMD_UART4_DCE_TX                                      0x0D8 0x340 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_CMD_UART4_DTE_RX                                      0x0D8 0x340 0x50C 0x3 0x5
+#define MX8MN_IOMUXC_SD2_CMD_PDM_CLK                                           0x0D8 0x340 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD2_CMD_GPIO2_IO14                                        0x0D8 0x340 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1                             0x0D8 0x340 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0                                    0x0DC 0x344 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_SAI5_RX_DATA0                                   0x0DC 0x344 0x4D4 0x1 0x1
+#define MX8MN_IOMUXC_SD2_DATA0_I2C4_SDA                                        0x0DC 0x344 0x58C 0x2 0x1
+#define MX8MN_IOMUXC_SD2_DATA0_UART2_DCE_RX                                    0x0DC 0x344 0x4FC 0x3 0x6
+#define MX8MN_IOMUXC_SD2_DATA0_UART2_DTE_TX                                    0x0DC 0x344 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_PDM_BIT_STREAM0                                 0x0DC 0x344 0x534 0x4 0x2
+#define MX8MN_IOMUXC_SD2_DATA0_GPIO2_IO15                                      0x0DC 0x344 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2                           0x0DC 0x344 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1                                    0x0E0 0x348 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_SAI5_TX_SYNC                                    0x0E0 0x348 0x4EC 0x1 0x1
+#define MX8MN_IOMUXC_SD2_DATA1_I2C4_SCL                                        0x0E0 0x348 0x5D4 0x2 0x1
+#define MX8MN_IOMUXC_SD2_DATA1_UART2_DCE_TX                                    0x0E0 0x348 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_UART2_DTE_RX                                    0x0E0 0x348 0x4FC 0x3 0x7
+#define MX8MN_IOMUXC_SD2_DATA1_PDM_BIT_STREAM1                                 0x0E0 0x348 0x538 0x4 0x4
+#define MX8MN_IOMUXC_SD2_DATA1_GPIO2_IO16                                      0x0E0 0x348 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT                               0x0E0 0x348 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2                                    0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_SAI5_TX_BCLK                                    0x0E4 0x34C 0x4E8 0x1 0x1
+#define MX8MN_IOMUXC_SD2_DATA2_ECSPI2_SS0                                      0x0E4 0x34C 0x570 0x2 0x2
+#define MX8MN_IOMUXC_SD2_DATA2_SPDIF1_OUT                                      0x0E4 0x34C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_PDM_BIT_STREAM2                                 0x0E4 0x34C 0x53C 0x4 0x4
+#define MX8MN_IOMUXC_SD2_DATA2_GPIO2_IO17                                      0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP                               0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3                                    0x0E8 0x350 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_SAI5_TX_DATA0                                   0x0E8 0x350 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_ECSPI2_MISO                                     0x0E8 0x350 0x578 0x2 0x1
+#define MX8MN_IOMUXC_SD2_DATA3_SPDIF1_IN                                       0x0E8 0x350 0x5CC 0x3 0x2
+#define MX8MN_IOMUXC_SD2_DATA3_PDM_BIT_STREAM3                                 0x0E8 0x350 0x540 0x4 0x4
+#define MX8MN_IOMUXC_SD2_DATA3_GPIO2_IO18                                      0x0E8 0x350 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET                        0x0E8 0x350 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_RESET_B_USDHC2_RESET_B                                0x0EC 0x354 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19                                    0x0EC 0x354 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET                     0x0EC 0x354 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_WP_USDHC2_WP                                          0x0F0 0x358 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_WP_GPIO2_IO20                                         0x0F0 0x358 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_WP_CORESIGHT_EVENTI                                   0x0F0 0x358 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE                                      0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK                                      0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_ALE_PDM_BIT_STREAM0                                  0x0F4 0x35C 0x534 0x3 0x3
+#define MX8MN_IOMUXC_NAND_ALE_UART3_DCE_RX                                     0x0F4 0x35C 0x504 0x4 0x6
+#define MX8MN_IOMUXC_NAND_ALE_UART3_DTE_TX                                     0x0F4 0x35C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_ALE_GPIO3_IO0                                        0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_ALE_CORESIGHT_TRACE_CLK                              0x0F4 0x35C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B                                  0x0F8 0x360 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B                                   0x0F8 0x360 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_PDM_BIT_STREAM1                                0x0F8 0x360 0x538 0x3 0x5
+#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DCE_TX                                   0x0F8 0x360 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DTE_RX                                   0x0F8 0x360 0x504 0x4 0x7
+#define MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1                                      0x0F8 0x360 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_CORESIGHT_TRACE_CTL                            0x0F8 0x360 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B                                  0x0FC 0x364 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B                                   0x0FC 0x364 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE                                  0x0FC 0x364 0x59C 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_PDM_BIT_STREAM0                                0x0FC 0x364 0x534 0x3 0x4
+#define MX8MN_IOMUXC_NAND_CE1_B_I2C4_SCL                                       0x0FC 0x364 0x5D4 0x4 0x2
+#define MX8MN_IOMUXC_NAND_CE1_B_GPIO3_IO2                                      0x0FC 0x364 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_CORESIGHT_TRACE0                               0x0FC 0x364 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B                                  0x100 0x368 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B                                   0x100 0x368 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5                                   0x100 0x368 0x550 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_PDM_BIT_STREAM1                                0x100 0x368 0x538 0x3 0x6
+#define MX8MN_IOMUXC_NAND_CE2_B_I2C4_SDA                                       0x100 0x368 0x58C 0x4 0x2
+#define MX8MN_IOMUXC_NAND_CE2_B_GPIO3_IO3                                      0x100 0x368 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_CORESIGHT_TRACE1                               0x100 0x368 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B                                  0x104 0x36C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B                                   0x104 0x36C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6                                   0x104 0x36C 0x584 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_PDM_BIT_STREAM2                                0x104 0x36C 0x53C 0x3 0x5
+#define MX8MN_IOMUXC_NAND_CE3_B_I2C3_SDA                                       0x104 0x36C 0x5BC 0x4 0x2
+#define MX8MN_IOMUXC_NAND_CE3_B_GPIO3_IO4                                      0x104 0x36C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_CORESIGHT_TRACE2                               0x104 0x36C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE                                      0x108 0x370 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CLE_QSPI_B_SCLK                                      0x108 0x370 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7                                     0x108 0x370 0x54C 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CLE_GPIO3_IO5                                        0x108 0x370 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CLE_CORESIGHT_TRACE3                                 0x108 0x370 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00                                0x10C 0x374 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0                                  0x10C 0x374 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_PDM_BIT_STREAM2                               0x10C 0x374 0x53C 0x3 0x6
+#define MX8MN_IOMUXC_NAND_DATA00_UART4_DCE_RX                                  0x10C 0x374 0x50C 0x4 0x6
+#define MX8MN_IOMUXC_NAND_DATA00_UART4_DTE_TX                                  0x10C 0x374 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_GPIO3_IO6                                     0x10C 0x374 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_CORESIGHT_TRACE4                              0x10C 0x374 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01                                0x110 0x378 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1                                  0x110 0x378 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_PDM_BIT_STREAM3                               0x110 0x378 0x540 0x3 0x5
+#define MX8MN_IOMUXC_NAND_DATA01_UART4_DCE_TX                                  0x110 0x378 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_UART4_DTE_RX                                  0x110 0x378 0x50C 0x4 0x7
+#define MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7                                     0x110 0x378 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_CORESIGHT_TRACE5                              0x110 0x378 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02                                0x114 0x37C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2                                  0x114 0x37C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_USDHC3_CD_B                                   0x114 0x37C 0x598 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_I2C4_SDA                                      0x114 0x37C 0x58C 0x4 0x3
+#define MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8                                     0x114 0x37C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_CORESIGHT_TRACE6                              0x114 0x37C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03                                0x118 0x380 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3                                  0x118 0x380 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_USDHC3_WP                                     0x118 0x380 0x5B8 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_GPIO3_IO9                                     0x118 0x380 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_CORESIGHT_TRACE7                              0x118 0x380 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04                                0x11C 0x384 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_QSPI_B_DATA0                                  0x11C 0x384 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0                                  0x11C 0x384 0x5B4 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_GPIO3_IO10                                    0x11C 0x384 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_CORESIGHT_TRACE8                              0x11C 0x384 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05                                0x120 0x388 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_QSPI_B_DATA1                                  0x120 0x388 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1                                  0x120 0x388 0x5B0 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_GPIO3_IO11                                    0x120 0x388 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_CORESIGHT_TRACE9                              0x120 0x388 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06                                0x124 0x38C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_QSPI_B_DATA2                                  0x124 0x38C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2                                  0x124 0x38C 0x5E4 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_GPIO3_IO12                                    0x124 0x38C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_CORESIGHT_TRACE10                             0x124 0x38C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07                                0x128 0x390 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_QSPI_B_DATA3                                  0x128 0x390 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3                                  0x128 0x390 0x5E0 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_GPIO3_IO13                                    0x128 0x390 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_CORESIGHT_TRACE11                             0x128 0x390 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DQS_RAWNAND_DQS                                      0x12C 0x394 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DQS_QSPI_A_DQS                                       0x12C 0x394 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DQS_PDM_CLK                                          0x12C 0x394 0x000 0x3 0x0
+#define MX8MN_IOMUXC_NAND_DQS_I2C3_SCL                                         0x12C 0x394 0x588 0x4 0x2
+#define MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14                                       0x12C 0x394 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DQS_CORESIGHT_TRACE12                                0x12C 0x394 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B                                    0x130 0x398 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_QSPI_B_DQS                                      0x130 0x398 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4                                    0x130 0x398 0x558 0x2 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_PDM_BIT_STREAM1                                 0x130 0x398 0x538 0x3 0x7
+#define MX8MN_IOMUXC_NAND_RE_B_GPIO3_IO15                                      0x130 0x398 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_CORESIGHT_TRACE13                               0x130 0x398 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B                              0x134 0x39C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B                               0x134 0x39C 0x000 0x2 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_PDM_BIT_STREAM3                              0x134 0x39C 0x540 0x3 0x6
+#define MX8MN_IOMUXC_NAND_READY_B_I2C3_SCL                                     0x134 0x39C 0x588 0x4 0x3
+#define MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16                                   0x134 0x39C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_CORESIGHT_TRACE14                            0x134 0x39C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                    0x138 0x3A0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK                                      0x138 0x3A0 0x5A0 0x2 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_I2C3_SDA                                        0x138 0x3A0 0x5BC 0x4 0x3
+#define MX8MN_IOMUXC_NAND_WE_B_GPIO3_IO17                                      0x138 0x3A0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_CORESIGHT_TRACE15                               0x138 0x3A0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B                                    0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD                                      0x13C 0x3A4 0x5DC 0x2 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_I2C4_SDA                                        0x13C 0x3A4 0x58C 0x4 0x4
+#define MX8MN_IOMUXC_NAND_WP_B_GPIO3_IO18                                      0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_CORESIGHT_EVENTO                                0x13C 0x3A4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC                                    0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXFS_GPIO3_IO19                                      0x140 0x3A8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXC_SAI5_RX_BCLK                                     0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXC_PDM_CLK                                          0x144 0x3AC 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20                                       0x144 0x3AC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0                                   0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0                                 0x148 0x3B0 0x534 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21                                      0x148 0x3B0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1                                   0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC                                    0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1                                 0x14C 0x3B4 0x538 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22                                      0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2                                   0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                    0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2                                 0x150 0x3B8 0x53C 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23                                      0x150 0x3B8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                   0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0                                   0x154 0x3BC 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3                                 0x154 0x3BC 0x540 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24                                      0x154 0x3BC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK                                       0x158 0x3C0 0x594 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25                                      0x158 0x3C0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                    0x1B0 0x418 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                    0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_DATA1                                   0x1B0 0x418 0x000 0x2 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_DATA1                                   0x1B0 0x418 0x5AC 0x3 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DCE_TX                                    0x1B0 0x418 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DTE_RX                                    0x1B0 0x418 0x4F4 0x4 0x2
+#define MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21                                      0x1B0 0x418 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_PDM_BIT_STREAM2                                 0x1B0 0x418 0x53C 0x6 0x7
+#define MX8MN_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                     0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                     0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MN_IOMUXC_SAI2_RXC_UART1_DCE_RX                                     0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MN_IOMUXC_SAI2_RXC_UART1_DTE_TX                                     0x1B4 0x41C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22                                       0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXC_PDM_BIT_STREAM1                                  0x1B4 0x41C 0x538 0x6 0x8
+#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                   0x1B8 0x420 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                   0x1B8 0x420 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_TX_DATA1                                   0x1B8 0x420 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B                                 0x1B8 0x420 0x4F0 0x4 0x2
+#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B                                 0x1B8 0x420 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23                                      0x1B8 0x420 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_PDM_BIT_STREAM3                                 0x1B8 0x420 0x540 0x6 0x7
+#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                    0x1BC 0x424 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                   0x1BC 0x424 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_DATA1                                   0x1BC 0x424 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B                                 0x1BC 0x424 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B                                 0x1BC 0x424 0x4F0 0x4 0x3
+#define MX8MN_IOMUXC_SAI2_TXFS_GPIO4_IO24                                      0x1BC 0x424 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_PDM_BIT_STREAM2                                 0x1BC 0x424 0x53C 0x6 0x8
+#define MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                     0x1C0 0x428 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_TXC_SAI5_TX_DATA2                                    0x1C0 0x428 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25                                       0x1C0 0x428 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_TXC_PDM_BIT_STREAM1                                  0x1C0 0x428 0x538 0x6 0x9
+#define MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0                                   0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3                                   0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26                                      0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_TXD0_CCMSRCGPCMIX_BOOT_MODE4                         0x1C4 0x42C 0x540 0x6 0x8
+#define MX8MN_IOMUXC_SAI2_MCLK_SAI2_MCLK                                       0x1C8 0x430 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_MCLK_SAI5_MCLK                                       0x1C8 0x430 0x594 0x1 0x2
+#define MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27                                      0x1C8 0x430 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_MCLK_SAI3_MCLK                                       0x1C8 0x430 0x5C0 0x6 0x1
+#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC                                    0x1CC 0x434 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1                                   0x1CC 0x434 0x5F0 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC                                    0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_DATA1                                   0x1CC 0x434 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_SPDIF1_IN                                       0x1CC 0x434 0x5CC 0x4 0x3
+#define MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28                                      0x1CC 0x434 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_PDM_BIT_STREAM0                                 0x1CC 0x434 0x534 0x6 0x5
+#define MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                     0x1D0 0x438 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_GPT1_CLK                                         0x1D0 0x438 0x5E8 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                     0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MN_IOMUXC_SAI3_RXC_SAI2_RX_DATA1                                    0x1D0 0x438 0x5AC 0x3 0x2
+#define MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                                  0x1D0 0x438 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                                  0x1D0 0x438 0x4F8 0x4 0x2
+#define MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29                                       0x1D0 0x438 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_PDM_CLK                                          0x1D0 0x438 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                    0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                    0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                    0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MN_IOMUXC_SAI3_RXD_SAI3_TX_DATA1                                    0x1D4 0x43C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                                  0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MN_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                                  0x1D4 0x43C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_GPIO4_IO30                                       0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_PDM_BIT_STREAM1                                  0x1D4 0x43C 0x538 0x6 0x10
+#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                    0x1D8 0x440 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                   0x1D8 0x440 0x5EC 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                   0x1D8 0x440 0x4D8 0x2 0x1
+#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_DATA1                                   0x1D8 0x440 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                    0x1D8 0x440 0x4FC 0x4 0x2
+#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                    0x1D8 0x440 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_GPIO4_IO31                                      0x1D8 0x440 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_PDM_BIT_STREAM3                                 0x1D8 0x440 0x540 0x6 0x9
+#define MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                     0x1DC 0x444 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                    0x1DC 0x444 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                    0x1DC 0x444 0x4DC 0x2 0x1
+#define MX8MN_IOMUXC_SAI3_TXC_SAI2_TX_DATA1                                    0x1DC 0x444 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX                                     0x1DC 0x444 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_UART2_DTE_RX                                     0x1DC 0x444 0x4FC 0x4 0x3
+#define MX8MN_IOMUXC_SAI3_TXC_GPIO5_IO0                                        0x1DC 0x444 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_PDM_BIT_STREAM2                                  0x1DC 0x444 0x53C 0x6 0x9
+#define MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                    0x1E0 0x448 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_TXD_GPT1_COMPARE3                                    0x1E0 0x448 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_TXD_SAI5_RX_DATA3                                    0x1E0 0x448 0x4E0 0x2 0x1
+#define MX8MN_IOMUXC_SAI3_TXD_SPDIF1_EXT_CLK                                   0x1E0 0x448 0x568 0x4 0x2
+#define MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1                                        0x1E0 0x448 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_TXD_CCMSRCGPCMIX_BOOT_MODE5                          0x1E0 0x448 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK                                       0x1E4 0x44C 0x5C0 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_PWM4_OUT                                        0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_SAI5_MCLK                                       0x1E4 0x44C 0x594 0x2 0x3
+#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_OUT                                      0x1E4 0x44C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2                                       0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_IN                                       0x1E4 0x44C 0x5CC 0x6 0x4
+#define MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT                                       0x1E8 0x450 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SPDIF_TX_PWM3_OUT                                         0x1E8 0x450 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3                                        0x1E8 0x450 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN                                        0x1EC 0x454 0x5CC 0x0 0x0
+#define MX8MN_IOMUXC_SPDIF_RX_PWM2_OUT                                         0x1EC 0x454 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4                                        0x1EC 0x454 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                              0x1F0 0x458 0x568 0x0 0x0
+#define MX8MN_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT                                    0x1F0 0x458 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5                                   0x1F0 0x458 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK                                   0x1F4 0x45C 0x5D8 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX                                  0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX                                  0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_I2C1_SCL                                      0x1F4 0x45C 0x55C 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_SCLK_SAI5_RX_SYNC                                  0x1F4 0x45C 0x4DC 0x3 0x2
+#define MX8MN_IOMUXC_ECSPI1_SCLK_GPIO5_IO6                                     0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI                                   0x1F8 0x460 0x5A8 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX                                  0x1F8 0x460 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX                                  0x1F8 0x460 0x504 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI1_MOSI_I2C1_SDA                                      0x1F8 0x460 0x56C 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_MOSI_SAI5_RX_BCLK                                  0x1F8 0x460 0x4D0 0x3 0x3
+#define MX8MN_IOMUXC_ECSPI1_MOSI_GPIO5_IO7                                     0x1F8 0x460 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO                                   0x1FC 0x464 0x5C4 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B                               0x1FC 0x464 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B                               0x1FC 0x464 0x500 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_I2C2_SCL                                      0x1FC 0x464 0x5D0 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_MISO_SAI5_RX_DATA0                                 0x1FC 0x464 0x4D4 0x3 0x3
+#define MX8MN_IOMUXC_ECSPI1_MISO_GPIO5_IO8                                     0x1FC 0x464 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_SS0_ECSPI1_SS0                                     0x200 0x468 0x564 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B                                0x200 0x468 0x500 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B                                0x200 0x468 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_SS0_I2C2_SDA                                       0x200 0x468 0x560 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_RX_DATA1                                  0x200 0x468 0x4D8 0x3 0x2
+#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_TX_SYNC                                   0x200 0x468 0x4EC 0x4 0x3
+#define MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9                                      0x200 0x468 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK                                   0x204 0x46C 0x580 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX                                  0x204 0x46C 0x50C 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX                                  0x204 0x46C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_I2C3_SCL                                      0x204 0x46C 0x588 0x2 0x4
+#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_RX_DATA2                                 0x204 0x46C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_TX_BCLK                                  0x204 0x46C 0x4E8 0x4 0x3
+#define MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10                                    0x204 0x46C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI                                   0x208 0x470 0x590 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX                                  0x208 0x470 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX                                  0x208 0x470 0x50C 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI2_MOSI_I2C3_SDA                                      0x208 0x470 0x5BC 0x2 0x4
+#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_RX_DATA3                                 0x208 0x470 0x4E0 0x3 0x2
+#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_TX_DATA0                                 0x208 0x470 0x000 0x4 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11                                    0x208 0x470 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO                                   0x20C 0x474 0x578 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B                               0x20C 0x474 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B                               0x20C 0x474 0x508 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_I2C4_SCL                                      0x20C 0x474 0x5D4 0x2 0x3
+#define MX8MN_IOMUXC_ECSPI2_MISO_SAI5_MCLK                                     0x20C 0x474 0x594 0x3 0x4
+#define MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12                                    0x20C 0x474 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0                                     0x210 0x478 0x570 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B                                0x210 0x478 0x508 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B                                0x210 0x478 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_SS0_I2C4_SDA                                       0x210 0x478 0x58C 0x2 0x5
+#define MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13                                     0x210 0x478 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL                                         0x214 0x47C 0x55C 0x0 0x0
+#define MX8MN_IOMUXC_I2C1_SCL_ENET1_MDC                                        0x214 0x47C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C1_SCL_ECSPI1_SCLK                                      0x214 0x47C 0x5D8 0x3 0x1
+#define MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14                                       0x214 0x47C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA                                         0x218 0x480 0x56C 0x0 0x0
+#define MX8MN_IOMUXC_I2C1_SDA_ENET1_MDIO                                       0x218 0x480 0x4C0 0x1 0x2
+#define MX8MN_IOMUXC_I2C1_SDA_ECSPI1_MOSI                                      0x218 0x480 0x5A8 0x3 0x1
+#define MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15                                       0x218 0x480 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL                                         0x21C 0x484 0x5D0 0x0 0x0
+#define MX8MN_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN                             0x21C 0x484 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C2_SCL_USDHC3_CD_B                                      0x21C 0x484 0x598 0x2 0x1
+#define MX8MN_IOMUXC_I2C2_SCL_ECSPI1_MISO                                      0x21C 0x484 0x5C4 0x3 0x1
+#define MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16                                       0x21C 0x484 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA                                         0x220 0x488 0x560 0x0 0x0
+#define MX8MN_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT                            0x220 0x488 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C2_SDA_USDHC3_WP                                        0x220 0x488 0x5B8 0x2 0x1
+#define MX8MN_IOMUXC_I2C2_SDA_ECSPI1_SS0                                       0x220 0x488 0x564 0x3 0x1
+#define MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17                                       0x220 0x488 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL                                         0x224 0x48C 0x588 0x0 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_PWM4_OUT                                         0x224 0x48C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_GPT2_CLK                                         0x224 0x48C 0x000 0x2 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_ECSPI2_SCLK                                      0x224 0x48C 0x580 0x3 0x2
+#define MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18                                       0x224 0x48C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA                                         0x228 0x490 0x5BC 0x0 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_PWM3_OUT                                         0x228 0x490 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_GPT3_CLK                                         0x228 0x490 0x000 0x2 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_ECSPI2_MOSI                                      0x228 0x490 0x590 0x3 0x2
+#define MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19                                       0x228 0x490 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL                                         0x22C 0x494 0x5D4 0x0 0x0
+#define MX8MN_IOMUXC_I2C4_SCL_PWM2_OUT                                         0x22C 0x494 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C4_SCL_ECSPI2_MISO                                      0x22C 0x494 0x578 0x3 0x2
+#define MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20                                       0x22C 0x494 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA                                         0x230 0x498 0x58C 0x0 0x0
+#define MX8MN_IOMUXC_I2C4_SDA_PWM1_OUT                                         0x230 0x498 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C4_SDA_ECSPI2_SS0                                       0x230 0x498 0x570 0x3 0x1
+#define MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21                                       0x230 0x498 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX                                    0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MN_IOMUXC_UART1_RXD_UART1_DTE_TX                                    0x234 0x49C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART1_RXD_ECSPI3_SCLK                                     0x234 0x49C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART1_RXD_GPIO5_IO22                                      0x234 0x49C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX                                    0x238 0x4A0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART1_TXD_UART1_DTE_RX                                    0x238 0x4A0 0x4F4 0x0 0x1
+#define MX8MN_IOMUXC_UART1_TXD_ECSPI3_MOSI                                     0x238 0x4A0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23                                      0x238 0x4A0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX                                    0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MN_IOMUXC_UART2_RXD_UART2_DTE_TX                                    0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART2_RXD_ECSPI3_MISO                                     0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART2_RXD_GPT1_COMPARE3                                   0x23C 0x4A4 0x000 0x3 0x0
+#define MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24                                      0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX                                    0x240 0x4A8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART2_TXD_UART2_DTE_RX                                    0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MN_IOMUXC_UART2_TXD_ECSPI3_SS0                                      0x240 0x4A8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART2_TXD_GPT1_COMPARE2                                   0x240 0x4A8 0x000 0x3 0x0
+#define MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25                                      0x240 0x4A8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX                                    0x244 0x4AC 0x504 0x0 0x2
+#define MX8MN_IOMUXC_UART3_RXD_UART3_DTE_TX                                    0x244 0x4AC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B                                 0x244 0x4AC 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART3_RXD_UART1_DTE_RTS_B                                 0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MN_IOMUXC_UART3_RXD_USDHC3_RESET_B                                  0x244 0x4AC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_UART3_RXD_GPT1_CAPTURE2                                   0x244 0x4AC 0x5EC 0x3 0x1
+#define MX8MN_IOMUXC_UART3_RXD_GPIO5_IO26                                      0x244 0x4AC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX                                    0x248 0x4B0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART3_TXD_UART3_DTE_RX                                    0x248 0x4B0 0x504 0x0 0x3
+#define MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B                                 0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MN_IOMUXC_UART3_TXD_UART1_DTE_CTS_B                                 0x248 0x4B0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART3_TXD_USDHC3_VSELECT                                  0x248 0x4B0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_UART3_TXD_GPT1_CLK                                        0x248 0x4B0 0x5E8 0x3 0x1
+#define MX8MN_IOMUXC_UART3_TXD_GPIO5_IO27                                      0x248 0x4B0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX                                    0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MN_IOMUXC_UART4_RXD_UART4_DTE_TX                                    0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART4_RXD_UART2_DCE_CTS_B                                 0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART4_RXD_UART2_DTE_RTS_B                                 0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MN_IOMUXC_UART4_RXD_GPT1_COMPARE1                                   0x24C 0x4B4 0x000 0x3 0x0
+#define MX8MN_IOMUXC_UART4_RXD_GPIO5_IO28                                      0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX                                    0x250 0x4B8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART4_TXD_UART4_DTE_RX                                    0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MN_IOMUXC_UART4_TXD_UART2_DCE_RTS_B                                 0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MN_IOMUXC_UART4_TXD_UART2_DTE_CTS_B                                 0x250 0x4B8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART4_TXD_GPT1_CAPTURE1                                   0x250 0x4B8 0x5F0 0x3 0x1
+#define MX8MN_IOMUXC_UART4_TXD_GPIO5_IO29                                      0x250 0x4B8 0x000 0x5 0x0
+
+#endif /* __DTS_IMX8MN_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
new file mode 100644
index 0000000000..3f1e49bfe3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-tqma8mqnl.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
+	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+
+	aliases {
+		eeprom0 = &eeprom3;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+/* Located on TQMa8MxML-ADAP */
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0hub_sel>;
+
+	sel-usb-hub-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
+		 <&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
+		 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
+		 <&clk IMX8MN_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+	clock-names = "mclk";
+	clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	power-active-high;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x00000146>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x00000146>;
+	};
+
+	pinctrl_expander2: expander2grp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x94>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002>,
+			   <MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002>,
+			   <MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x14>,
+			   <MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x14>,
+			   <MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x14>,
+			   <MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x14>,
+			   <MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x90>,
+			   <MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x90>,
+			   <MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x90>,
+			   <MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x90>,
+			   <MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x14>,
+			   <MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x90>,
+			   <MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x84>,
+			   <MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x84>,
+			   <MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0		0x84>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x84>,
+			   <MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14		0x84>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001C4>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17		0x400001C4>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001C4>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19		0x400001C4>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT		0x14>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK		0x94>,
+			   <MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0x94>,
+			   <MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0x94>,
+			   <MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0x94>,
+			   <MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0x94>,
+			   <MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0x94>,
+			   <MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0x94>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX		0x16>;
+	};
+
+	pinctrl_usb0hub_sel: usb0hub-selgrp {
+		/* SEL_USB_HUB_B */
+		fsl,pins = <MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1		0x84>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
+			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>,
+			   <MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID		0x1C4>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12		0x84>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
new file mode 100644
index 0000000000..391ca5516e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include "imx8mn.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MN TQMa8MxNL";
+	compatible = "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXNL_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXNL_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V85_SOC: 0.85 .. 0.95 */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_0V85_GPU / DRAM: shall be equal to BUCK1 for i.MX8MN */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VCC3V3 -> VMMC, ... must not be changed */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 -> RAM, ... must not be changed */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_SNVS */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_ANA */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V9_MIPI */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VCC SD IO - switched using SD2 VSELECT */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		read-only;
+		reg = <0x53>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+/*
+ * Attention:
+ * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
+ * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
+ */
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x84>,
+			   <MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x84>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c4>,
+			   <MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c4>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c4>,
+			   <MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c4>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x84>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x84>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   <MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   <MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d6>,
+			   <MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   <MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x84>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
new file mode 100644
index 0000000000..a7a57442cb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Supports Symphony evaluation board versions >= 1.4a.
+ *
+ * Copyright 2019-2020 Variscite Ltd.
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8MN Symphony evaluation board";
+	compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Back";
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "Heartbeat";
+			gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ethphy {
+	reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		wakeup-source;
+
+		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
+		usb3-sata-sel-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "usb3_sata_sel";
+		};
+
+		som-vselect-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "som_vselect";
+		};
+
+		enet-sel-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "enet_sel";
+		};
+	};
+
+	/*
+	 * For Symphony board version <= 1.4, the PTN5150 IRQ pin is connected
+	 * to GPIO1_IO11 on the SoM (R106 present, R132 absent). From Symphony
+	 * board version >= 1.4a, the PTN5150 ID pin is connected to GPIO1_IO11
+	 * on the SoM (R106 absent, R132 present).
+	 */
+	extcon_usbotg1: typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5150>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	/* Capacitive touch controller */
+	ft5x06_ts: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_captouch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+/* Header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_captouch: captouchgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4		0x16
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16
+		>;
+	};
+
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x16
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
new file mode 100644
index 0000000000..b8946edf31
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -0,0 +1,561 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright 2019-2020 Variscite Ltd.
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx8mn.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8MN module";
+	compatible = "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth_phy>;
+		regulator-name = "eth_phy_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		   <&gpio1  0 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	/* Resistive touch controller */
+	touchscreen@0 {
+		reg = <0>;
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_restouch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		spi-max-frequency = <1500000>;
+		pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+		ti,x-min = /bits/ 16 <125>;
+		touchscreen-size-x = <4008>;
+		ti,y-min = /bits/ 16 <282>;
+		touchscreen-size-y = <3864>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		touchscreen-max-pressure = <255>;
+		touchscreen-average-samples = <10>;
+		ti,debounce-tol = /bits/ 16 <3>;
+		ti,debounce-rep = /bits/ 16 <1>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+		ti,keep-vref-on;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-supply = <&reg_eth_phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@4 { /* AR8033 or ADIN1300 */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			/*
+			 * Deassert delay:
+			 * ADIN1300 requires 5ms.
+			 * AR8033   requires 1ms.
+			 */
+			reset-deassert-us = <20000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom_som: eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	/* TODO: configure audio, as of now just put a placeholder */
+	wm8904: codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		status = "disabled";
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+/* WIFI */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x13
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x13
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x13
+			MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x13
+			MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x13
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x159
+		>;
+	};
+
+	pinctrl_fec1_sleep: fec1sleepgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16		0x120
+			MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17		0x120
+			MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18		0x120
+			MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19		0x120
+			MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20		0x120
+			MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21		0x120
+			MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29		0x120
+			MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28		0x120
+			MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27		0x120
+			MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26		0x120
+			MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23		0x120
+			MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25		0x120
+			MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24		0x120
+			MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22		0x120
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x120
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x141
+		>;
+	};
+
+	pinctrl_reg_eth_phy: regethphygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9	0x41
+		>;
+	};
+
+	pinctrl_restouch: restouchgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX	0x140
+			MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
new file mode 100644
index 0000000000..08746fb825
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -0,0 +1,1010 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "imx8mn.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7902 i.MX8MN board";
+	compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
+
+	aliases {
+		usb0 = &usbotg1;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	can20m: can20m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "can20m";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel1";
+			gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel2";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel3";
+			gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel4";
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel5";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb_usb1_vbus";
+		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		regulator-name = "wifi";
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&can20m>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"uart2_en#", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
+		"", "uart1_term", "uart1_half", "app_gpio2",
+		"mipi_gpio1", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "mipi_gpio4",
+		"mipi_gpio3", "mipi_gpio2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vin_4p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* off-board header */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pgc_gpumix {
+	status = "disabled";
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* RS232/RS485/RS422 selectable */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+	status = "okay";
+};
+
+/* RS232 console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
+			MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
+			MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
+			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
+			MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000041 /* MIPI_GPIO2 */
+			MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* MIPI_GPIO3/PWM2 */
+			MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* MIPI_GPIO4/PWM3 */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
+			MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
+			MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23	0x19
+			MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x19
+			MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20	0x19
+			MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x19
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x141 /* PPS */
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41 /* WLAN_WLON */
+		>;
+	};
+
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK	0xd6
+			MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK	0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0	0xd6
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC	0xd6
+		>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40
+			MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3	0x140 /* CAN_IRQ# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x82
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x82
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x82
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x40 /* SS0 */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x40000110 /* HALF */
+			MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25	0x40000110 /* TERM */
+			MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23	0x40000110 /* RS485 */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3_gpio: uart3_gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41 /* BT_EN# */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0		0x140 /* CTS */
+			MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1		0x140 /* RTS */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x141 /* GNSS_GASP */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
new file mode 100644
index 0000000000..1bb1d0c1ba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -0,0 +1,1320 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mn-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0xb00>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0x300>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x100>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc: soc@0 {
+		compatible = "fsl,imx8mn-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+		nvmem-cells = <&imx8mn_uid>;
+		nvmem-cell-names = "soc_unique_id";
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba2: spba-bus@30000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30000000 0x100000>;
+				ranges;
+
+				sai2: sai@30020000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x30020000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
+						<&clk IMX8MN_CLK_DUMMY>,
+						<&clk IMX8MN_CLK_SAI2_ROOT>,
+						<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@30030000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x30030000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI3_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai5: sai@30050000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x30050000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI5_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					fsl,shared-interrupt;
+					fsl,dataline = <0 0xf 0xf>;
+					status = "disabled";
+				};
+
+				sai6: sai@30060000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x30060000  0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI6_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				micfil: audio-controller@30080000 {
+					compatible = "fsl,imx8mm-micfil";
+					reg = <0x30080000 0x10000>;
+					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_PDM_IPG>,
+						 <&clk IMX8MN_CLK_PDM_ROOT>,
+						 <&clk IMX8MN_AUDIO_PLL1_OUT>,
+						 <&clk IMX8MN_AUDIO_PLL2_OUT>,
+						 <&clk IMX8MN_CLK_EXT3>;
+					clock-names = "ipg_clk", "ipg_clk_app",
+						      "pll8k", "pll11k", "clkext3";
+					dmas = <&sdma2 24 25 0x80000000>;
+					dma-names = "rx";
+					#sound-dai-cells = <0>;
+					status = "disabled";
+				};
+
+				spdif1: spdif@30090000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x30090000 0x10000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */
+						 <&clk IMX8MN_CLK_24M>, /* rxtx0 */
+						 <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */
+						 <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */
+						 <&clk IMX8MN_CLK_DUMMY>; /* spba */
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai7: sai@300b0000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x300b0000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI7_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				easrc: easrc@300c0000 {
+					compatible = "fsl,imx8mn-easrc";
+					reg = <0x300c0000 0x10000>;
+					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+					clock-names = "mem";
+					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+					dma-names = "ctx0_rx", "ctx0_tx",
+						    "ctx1_rx", "ctx1_tx",
+						    "ctx2_rx", "ctx2_tx",
+						    "ctx3_rx", "ctx3_tx";
+					firmware-name = "imx/easrc/easrc-imx8mn.bin";
+					fsl,asrc-rate = <8000>;
+					fsl,asrc-format = <2>;
+					status = "disabled";
+				};
+			};
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 21 108 11>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
+				#thermal-sensor-cells = <0>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma3: dma-controller@302b0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
+				 <&clk IMX8MN_CLK_SDMA3_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MN_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mn-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: syscon@30340000 {
+				compatible = "fsl,imx8mn-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mn_uid: unique-id@4 { /* 0x410-0x420 */
+					reg = <0x4 0x8>;
+				};
+
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
+					reg = <0x10 4>;
+				};
+
+				tmu_calib: calib@3c { /* 0x4f0 */
+					reg = <0x3c 4>;
+				};
+
+				fec_mac_address: mac-address@90 { /* 0x640 */
+					reg = <0x90 6>;
+				};
+			};
+
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
+				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mn-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>,
+						<&clk IMX8MN_CLK_A53_CORE>,
+						<&clk IMX8MN_CLK_NOC>,
+						<&clk IMX8MN_CLK_AUDIO_AHB>,
+						<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
+						<&clk IMX8MN_SYS_PLL3>,
+						<&clk IMX8MN_AUDIO_PLL1>,
+						<&clk IMX8MN_AUDIO_PLL2>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
+							 <&clk IMX8MN_ARM_PLL_OUT>,
+							 <&clk IMX8MN_SYS_PLL3_OUT>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>, <0>, <0>,
+							<400000000>,
+							<400000000>,
+							<600000000>,
+							<393216000>,
+							<361267200>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mn-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MN_CLK_USB_BUS>;
+					};
+
+					pgc_otg1: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+					};
+
+					pgc_gpumix: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_SHADER>,
+							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_AHB>;
+					};
+
+					pgc_dispmix: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+							 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+					};
+
+					pgc_mipi: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_MIPI>;
+						power-domains = <&pgc_dispmix>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM1_ROOT>,
+					<&clk IMX8MN_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM2_ROOT>,
+					 <&clk IMX8MN_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM3_ROOT>,
+					 <&clk IMX8MN_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM4_ROOT>,
+					 <&clk IMX8MN_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba1: spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
+
+				ecspi1: spi@30820000 {
+					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MN_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@30830000 {
+					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MN_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@30840000 {
+					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MN_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
+						 <&clk IMX8MN_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
+						 <&clk IMX8MN_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
+						 <&clk IMX8MN_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_AHB>,
+					 <&clk IMX8MN_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x1000 0x1000>;
+					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					 status = "disabled";
+				};
+
+				sec_jr1: jr@2000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x2000 0x1000>;
+					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x3000 0x1000>;
+					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART4_ROOT>,
+					 <&clk IMX8MN_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			flexspi: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_QSPI_ROOT>,
+					 <&clk IMX8MN_CLK_QSPI_ROOT>;
+				clock-names = "fspi_en", "fspi";
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MN_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mn-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ENET1_ROOT>,
+					 <&clk IMX8MN_CLK_ENET1_ROOT>,
+					 <&clk IMX8MN_CLK_ENET_TIMER>,
+					 <&clk IMX8MN_CLK_ENET_REF>,
+					 <&clk IMX8MN_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
+						  <&clk IMX8MN_CLK_ENET_TIMER>,
+						  <&clk IMX8MN_CLK_ENET_REF>,
+						  <&clk IMX8MN_CLK_ENET_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+							 <&clk IMX8MN_SYS_PLL2_100M>,
+							 <&clk IMX8MN_SYS_PLL2_125M>,
+							 <&clk IMX8MN_SYS_PLL2_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&fec_mac_address>;
+				nvmem-cell-names = "mac-address";
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			lcdif: lcdif@32e00000 {
+				compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x32e00000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif>;
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e10000 {
+				compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				reg = <0x32e10000 0x400>;
+				clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+					 <&clk IMX8MN_CLK_DSI_PHY_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_dsim>;
+						};
+					};
+				};
+			};
+
+			isi: isi@32e20000 {
+				compatible = "fsl,imx8mn-isi";
+				reg = <0x32e20000 0x8000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+				clock-names = "axi", "apb";
+				fsl,blk-ctrl = <&disp_blk_ctrl>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						isi_in: endpoint {
+							remote-endpoint = <&mipi_csi_out>;
+						};
+					};
+				};
+			};
+
+			disp_blk_ctrl: blk-ctrl@32e28000 {
+				compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+				reg = <0x32e28000 0x100>;
+				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+						<&pgc_dispmix>, <&pgc_mipi>,
+						<&pgc_mipi>;
+				power-domain-names = "bus", "isi",
+						     "lcdif", "mipi-dsi",
+						     "mipi-csi";
+				clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+					 <&clk IMX8MN_CLK_DISP_APB>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+					 <&clk IMX8MN_CLK_DSI_CORE>,
+					 <&clk IMX8MN_CLK_DSI_PHY_REF>,
+					 <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+				clock-names = "disp_axi", "disp_apb",
+					      "disp_axi_root", "disp_apb_root",
+					      "lcdif-axi", "lcdif-apb", "lcdif-pix",
+					      "dsi-pclk", "dsi-ref",
+					      "csi-aclk", "csi-pclk";
+				assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+						  <&clk IMX8MN_CLK_DSI_PHY_REF>,
+						  <&clk IMX8MN_CLK_DISP_PIXEL>,
+						  <&clk IMX8MN_CLK_DISP_AXI>,
+						  <&clk IMX8MN_CLK_DISP_APB>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+							 <&clk IMX8MN_CLK_24M>,
+							 <&clk IMX8MN_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MN_SYS_PLL2_1000M>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <266000000>,
+						       <24000000>,
+						       <594000000>,
+						       <500000000>,
+						       <200000000>;
+				#power-domain-cells = <1>;
+			};
+
+			mipi_csi: mipi-csi@32e30000 {
+				compatible = "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e30000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				assigned-clocks = <&clk IMX8MN_CLK_CAMERA_PIXEL>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>;
+				assigned-clock-rates = <333000000>;
+				clock-frequency = <333000000>;
+				clocks = <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_CAMERA_PIXEL>,
+					 <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_CSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_out: endpoint {
+							remote-endpoint = <&isi_in>;
+						};
+					};
+				};
+			};
+
+			usbotg1: usb@32e40000 {
+				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x32e40000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
+				phys = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_hsiomix>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@32e40200 {
+				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e40200 0x200>;
+			};
+		};
+
+		dma_apbh: dma-controller@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: nand-controller@33002000 {
+			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clk IMX8MN_CLK_NAND_ROOT>,
+				 <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		gpu: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x8000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MN_CLK_GPU_AHB>,
+				<&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+				<&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+				<&clk IMX8MN_CLK_GPU_SHADER>;
+			clock-names = "reg", "bus", "core", "shader";
+			assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+					  <&clk IMX8MN_CLK_GPU_SHADER>,
+					  <&clk IMX8MN_CLK_GPU_AXI>,
+					  <&clk IMX8MN_CLK_GPU_AHB>,
+					  <&clk IMX8MN_GPU_PLL>;
+			assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+						  <&clk IMX8MN_GPU_PLL_OUT>,
+						  <&clk IMX8MN_SYS_PLL1_800M>,
+						  <&clk IMX8MN_SYS_PLL1_800M>;
+			assigned-clock-rates = <400000000>,
+					       <400000000>,
+					       <800000000>,
+					       <400000000>,
+					       <1200000000>;
+			power-domains = <&pgc_gpumix>;
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,
+			      <0x38880000 0xc0000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
+				 <&clk IMX8MN_DRAM_PLL>,
+				 <&clk IMX8MN_CLK_DRAM_ALT>,
+				 <&clk IMX8MN_CLK_DRAM_APB>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	usbphynop1: usbphynop1 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
new file mode 100644
index 0000000000..acd265d8b5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Logic PD, Inc dba Beacon EmbeddedWorks
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp.dtsi"
+#include "imx8mp-beacon-som.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8MPlus Development kit";
+	compatible = "beacon,imx8mp-beacon-kit", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-0 {
+			label = "btn0";
+			linux,code = <BTN_0>;
+			gpios = <&pca6416_1 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "btn1";
+			linux,code = <BTN_1>;
+			gpios = <&pca6416_1 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+
+		button-2 {
+			label = "btn2";
+			linux,code = <BTN_2>;
+			gpios = <&pca6416_1 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+
+		button-3 {
+			label = "btn3";
+			linux,code = <BTN_3>;
+			gpios = <&pca6416_1 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led3>;
+
+		led-0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pcie0_refclk: clock-pcie {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_audio: regulator-wm8962 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <20000>;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_host_vbus";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-wm8962 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8962";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Microphone", "Headset Mic",
+					    "Speaker", "Speaker";
+		simple-audio-card,routing = "Headphones", "HPOUTL",
+					    "Headphones", "HPOUTR",
+					    "Speaker", "SPKOUTL",
+					    "Speaker", "SPKOUTR",
+					    "Headset Mic", "MICBIAS",
+					    "IN3R", "Headset Mic";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8962>;
+			clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@3 {
+			compatible = "ethernet-phy-id0022.1640",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <150000>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio2 {
+	usb-mux-hog {
+		gpio-hog;
+		gpios = <20 0>;
+		output-low;
+		line-name = "USB-C Mux En";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca6416_3: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&i2c3 {
+	/* Connected to USB Hub */
+	usb-typec@52 {
+		compatible = "nxp,ptn5110";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <384000>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wm8962>;
+		clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
+		assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-rates = <22576000>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+		#sound-dai-cells = <0>;
+	};
+
+	pca6416: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		usb-hub-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			output-low;
+			line-name = "USB Hub Enable";
+		};
+	};
+
+	usb-typec@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hd3ss3220>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
+			  <&clk IMX8MP_AUDIO_PLL2> ;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+	assigned-clock-rates = <12288000>, <361267200>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_host_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x40000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC	0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO	0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x16
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x140
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x10
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX	0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX	0x154
+		>;
+	};
+
+	pinctrl_hd3ss3220: hd3ss3220grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x140
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL	0x400001c2
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x10 /* PCIe_nDIS */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x10	/* PCIe_nRST */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19 /* Reset */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x1d6 /* IRQ */
+		>;
+	};
+
+	pinctrl_typec: typec1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0xc4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_wm8962: wm8962grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1	0x59
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
new file mode 100644
index 0000000000..e5da908047
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 LogicPD, Inc. dba Beacon EmbeddedWorks
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	reg_wl_bt: regulator-wifi-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl_bt>;
+		regulator-name = "wl-bt-pow-dwn";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <70000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	snps,force_thresh_dma_mode;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@3 {
+			compatible = "ethernet-phy-id0022.1640",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <384000>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <384000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl_bt>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	wakeup-source;
+	non-removable;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mwifiex: wifi@1 {
+		compatible = "marvell,sd8997";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x10
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x10
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c0
+		>;
+	};
+
+	pinctrl_reg_wl_bt: reg-wl-btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
new file mode 100644
index 0000000000..13674dc64b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -0,0 +1,977 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/qca-ar803x.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Data Modul i.MX8M Plus eDM SBC";
+	compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* There are 1/2/4 GiB options, adjusted by bootloader. */
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_backlight>;
+		brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 5000000 0>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	clk_xtal25: clock-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	panel: panel {
+		/* Compatible string is filled in by panel board DT Overlay. */
+		backlight = <&backlight>;
+		power-supply = <&reg_panel_vcc>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_panel_vcc: regulator-panel-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_vcc_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "PANEL_VCC";
+		/* GPIO flags are ignored, enable-active-high applies. */
+		gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_SD";
+		/* GPIO flags are ignored, enable-active-high applies. */
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */
+		enable-active-high;
+		off-on-delay-us = <12000>;
+		startup-delay-us = <100>;
+		vin-supply = <&buck4>;
+	};
+
+	watchdog { /* TPS3813 */
+		compatible = "linux,wdt-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_watchdog_gpio>;
+		always-running;
+		gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		hw_algo = "level";
+		/* Reset triggers in 2..3 seconds */
+		hw_margin_ms = <1500>;
+		/* Disabled by default */
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {	/* W25Q128JVEI */
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
+
+&ecspi2 {	/* Feature connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless feature board plugged in. */
+	status = "disabled";
+};
+
+&ecspi3 {	/* Display connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-handle = <&phy_eqos>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		phy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio_eqos>;
+
+			vddio_eqos: vddio-regulator {
+				regulator-name = "VDDIO_EQOS";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh_eqos: vddh-regulator {
+				regulator-name = "VDDH_EQOS";
+			};
+		};
+	};
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-handle = <&phy_fec>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		phy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio_fec>;
+
+			vddio_fec: vddio-regulator {
+				regulator-name = "VDDIO_FEC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh_fec: vddh-regulator {
+				regulator-name = "VDDH_FEC";
+			};
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#",
+		"", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03",
+		"GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#",
+		"", "", "", "ENET_RST#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "ENET2_INT#", "", "", "", "", "",
+		"WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#",
+		"", "", "", "",
+		"", "", "", "SD2_RESET#", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
+		"", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
+		"CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "",
+		"", "", "EEPROM_WP_1V8#", "", "", "", "", "",
+		"MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#",
+		"", "M2_W_DISABLE1_1V8#",
+		"M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#",
+		"", "DIS_USB_DN1", "DIS_USB_DN2", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "WDOG_EN", "", "",
+		"", "SPI1_CS#", "", "",
+		"", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
+		"I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
+		"", "", "", "",
+		"", "SPI3_CS#", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	usb-hub@2c {
+		compatible = "microchip,usb2514bi";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		individual-port-switching;
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		self-powered;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pcieclk: clk@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8CVNKZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4: BUCK4 {	/* VDD_3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* VDD_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* PMIC_LDO4 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_panel_pwm>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+/* SD slot */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&uart1 {	/* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";	/* Optional */
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {	/* A53 Debug */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb_dwc3_0 {	/* Lower plug direct */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {	/* Upper plug via HUB */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
+
+/* IOMUXC node should be at the end of DT to improve readability. */
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
+		    <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
+		    <&pinctrl_panel_expansion>;
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x44
+			MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x44
+			MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x44
+			MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x40
+		>;
+	};
+
+	pinctrl_eqos: eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+			/* ENET_RST# */
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x6
+			/* ENET_INT# */
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x40000090
+		>;
+	};
+
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			/* ENET2_RST# */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x6
+			/* ENET2_INT# */
+			MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x40000090
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_hog_feature: hog-feature-grp {
+		fsl,pins = <
+			/* GPIO5_IO03 */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x40000006
+			/* GPIO5_IO04 */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x40000006
+
+			/* CAN_INT# */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x40000090
+		>;
+	};
+
+	pinctrl_hog_panel: hog-panel-grp {
+		fsl,pins = <
+			/* GRAPHICS_GPIO0_1V8 */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x26
+		>;
+	};
+
+	pinctrl_hog_misc: hog-misc-grp {
+		fsl,pins = <
+			/* ENET_WOL# -- shared by both PHYs */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x40000090
+
+			/* PG_V_IN_VAR# */
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01		0x40000000
+			/* CSI2_PD_1V8 */
+			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08		0x0
+			/* CSI2_RESET_1V8# */
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09		0x0
+
+			/* DIS_USB_DN1 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x0
+			/* DIS_USB_DN2 */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x0
+
+			/* EEPROM_WP_1V8# */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x100
+			/* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x0
+			/* GRAPHICS_PRSNT_1V8# */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x40000000
+
+			/* CLK_CCM_CLKO1_3V3 */
+			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1		0x10
+		>;
+	};
+
+	pinctrl_hog_sbc: hog-sbc-grp {
+		fsl,pins = <
+			/* MEMCFG[0..2] straps */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x40000140
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x40000140
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x40000140
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x40000084
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x84
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x84
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x40000084
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x84
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x84
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x40000084
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x84
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x84
+		>;
+	};
+
+	pinctrl_i2c5: i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x40000084
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x40000084
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x84
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x84
+		>;
+	};
+
+	pinctrl_panel_backlight: panel-backlight-grp {
+		fsl,pins = <
+			/* BL_ENABLE_1V8 */
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x104
+		>;
+	};
+
+	pinctrl_panel_expansion: panel-expansion-grp {
+		fsl,pins = <
+			/* DSI_RESET_1V8# */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x2
+			/* DSI_IRQ_1V8# */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x40000090
+		>;
+	};
+
+	pinctrl_panel_pwm: panel-pwm-grp {
+		fsl,pins = <
+			/* BL_PWM_3V3 */
+			MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT			0x12
+		>;
+	};
+
+	pinctrl_panel_vcc_reg: panel-vcc-grp {
+		fsl,pins = <
+			/* TFT_ENABLE_1V8 */
+			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06		0x104
+		>;
+	};
+
+	pinctrl_pcie0: pcie-grp {
+		fsl,pins = <
+			/* M2_PCIE_RST# */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x2
+			/* M2_W_DISABLE1_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x2
+			/* M2_W_DISABLE2_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x2
+			/* CLK_M2_32K768 */
+			MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1		0x14
+			/* M2_PCIE_WAKE# */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40000140
+			/* M2_PCIE_CLKREQ# */
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B		0x61
+		>;
+	};
+
+	pinctrl_pdm: pdm-grp {
+		fsl,pins = <
+			/* PDM_SEL */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x0
+			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK		0x0
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00	0x0
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			/* PMIC_nINT */
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40000090
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			/* RTC_IRQ# */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x40000090
+		>;
+	};
+
+	pinctrl_sai1: sai1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK	0xd6
+			MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX		0x49
+			MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS		0x49
+			MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS		0x49
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x20
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x40000080
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usb_hub: usb-hub-grp {
+		fsl,pins = <
+			/* USBHUB_RESET# */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x4
+		>;
+	};
+
+	pinctrl_usb1: usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x6
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x80
+		>;
+	};
+
+	pinctrl_watchdog_gpio: watchdog-gpio-grp {
+		fsl,pins = <
+			/* WDOG_B# */
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x26
+			/* WDOG_EN -- ungate WDT RESET# signal propagation */
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x6
+			/* WDOG_KICK# / WDI */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x26
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
new file mode 100644
index 0000000000..267ceffc02
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright 2022 Ideas on Board Oy
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Polyhex Debix Model A i.MX8MPlus board";
+	compatible = "polyhex,imx8mp-debix-model-a", "polyhex,imx8mp-debix", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_hub>;
+		regulator-name = "USB_HUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 { /* RTL8211E */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "okay";
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&reg_usb_hub>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&reg_usb_hub>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN			0x1f
+			MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT			0x1f
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18				0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL				0x400001c3
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03				0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19				0x41
+		>;
+	};
+
+	pinctrl_reg_usb_hub: regusbhubgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26				0x19
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11				0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX				0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX				0x14f
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX				0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX				0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX				0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX				0x49
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR				0x10
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
new file mode 100644
index 0000000000..0b0c95432b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright (C) 2023 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-debix-som-a.dtsi"
+
+/ {
+	model = "Polyhex i.MX8MPlus Debix SOM A on BMB-08";
+	compatible = "polyhex,imx8mp-debix-som-a-bmb-08", "polyhex,imx8mp-debix-som-a",
+		     "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_baseboard_vdd3v3: regulator-baseboard-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "BB_VDD3V3";
+		/* Required timings for ethernet phy's */
+		startup-delay-us = <50000>;
+		off-on-delay-us = <110000>;
+		gpio = <&expander0 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_baseboard_vdd5v0: regulator-baseboard-vdd5v0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "BB_VDD5V";
+		gpio = <&expander0 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator-som-vdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "SOM_VDD1V8_SW";
+		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-som-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "SOM_VDD3V3_SW";
+		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-vbus-usb20 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "USB20_5V";
+		gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_baseboard_vdd5v0>;
+	};
+
+	regulator-vbus-usb30 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "USB30_5V";
+		gpio = <&expander1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_baseboard_vdd5v0>;
+	};
+
+	reg_vdd5v0: regulator-vdd5v0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VDD_5V";
+		gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	nvmem-cells = <&ethmac1>;
+	nvmem-cell-names = "mac-address";
+	phy-supply = <&reg_baseboard_vdd3v3>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20000>;
+			reset-deassert-us = <150000>;
+			eee-broken-1000t;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	nvmem-cells = <&ethmac2>;
+	nvmem-cell-names = "mac-address";
+	phy-supply = <&reg_baseboard_vdd3v3>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20000>;
+			reset-deassert-us = <150000>;
+			eee-broken-1000t;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_vdd5v0>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_vdd5v0>;
+	status = "okay";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c4 {
+	expander0: gpio@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <0x02>;
+	};
+
+	expander1: gpio@23 {
+		compatible = "nxp,pca9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <0x02>;
+
+		/*
+		 * Since USB1 is bound to peripheral mode we need to ensure
+		 * that VBUS is turned off.
+		 */
+		usb30-otg-hog {
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "USB30_OTG_EN";
+		};
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		#clock-cells = <0>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* MACs stored in ASCII */
+		ethmac1: mac-address@0 {
+			reg = <0x0 0xc>;
+		};
+
+		ethmac2: mac-address@c {
+			reg = <0xc 0xc>;
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Debug */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		reset-gpios = <&expander1 9 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vdd5v0>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <2>;
+		reset-gpios = <&expander1 9 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vdd5v0>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* µSD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+
+			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN			0x1f
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18				0x19
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN    0x1f
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x19
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX			0x154
+			MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX			0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX			0x154
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x140
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x14f
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
new file mode 100644
index 0000000000..bc312aa1bf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright (C) 2023 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Polyhex i.MX8MPlus Debix SOM A";
+	compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	adc@48 {
+		 compatible = "ti,ads1115";
+		 reg = <0x48>;
+		 #address-cells = <1>;
+		 #size-cells = <0>;
+
+		 channel@4 {
+			 reg = <4>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+
+		 channel@5 {
+			 reg = <5>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+
+		 channel@6 {
+			 reg = <6>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+
+		 channel@7 {
+			 reg = <7>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+	 };
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
new file mode 100644
index 0000000000..e9fb5f7f39
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
+	compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			pinctrl-0 = <&pinctrl_dhcom_h>;
+			pinctrl-names = "default";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	reg_3p3vdd: regulator-3p3vdd {	/* 3.3VDD */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3VDD";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&i2c5 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&reg_3p3vdd>;
+		VDDIO-supply = <&reg_vdd_3p3v_awo>;
+	};
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
+	phy-handle = <&ethphypdk>;
+	phy-mode = "rgmii";
+
+	mdio {
+		ethphypdk: ethernet-phy@7 { /* KSZ 9021 */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			max-speed = <100>;
+			reg = <7>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&pcie_phy {
+	clock-names = "ref";
+	clocks = <&clk IMX8MP_SYS_PLL2_100M>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_UNUSED>;
+	status = "okay";
+};
+
+&pcie {
+	fsl,max-link-speed = <1>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;	/* GPIO J */
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,over-current-active-low;
+};
+
+&iomuxc {
+	/*
+	 * GPIO_A,B,C,D are connected to buttons.
+	 * GPIO_E,F,H,I are connected to LEDs.
+	 * GPIO_M is connected to CLKOUT1.
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_g &pinctrl_dhcom_j
+		     &pinctrl_dhcom_k &pinctrl_dhcom_l
+		     &pinctrl_dhcom_int>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
new file mode 100644
index 0000000000..31d85d5871
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK3 PCB number: 669-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)";
+	compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	clk_xtal25: clock-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				usb_c_0_hs_ep: endpoint {
+					remote-endpoint = <&dwc3_0_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				usb_c_0_ss_ep: endpoint {
+					remote-endpoint = <&ptn5150_in_ep>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */
+			label = "TA4-GPIO-E";
+			linux,code = <KEY_E>;
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */
+			pinctrl-0 = <&pinctrl_dhcom_g>;
+			pinctrl-names = "default";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	reg_3p3vdd: regulator-3p3vdd {	/* 3.3VDD */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3VDD";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9540";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cmuxed0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				#sound-dai-cells = <0>;
+				clocks = <&clk_ext_audio_codec>;
+				VDDA-supply = <&reg_3p3vdd>;
+				VDDIO-supply = <&reg_vdd_3p3v_awo>;
+			};
+
+			typec@3d {
+				compatible = "nxp,ptn5150";
+				reg = <0x3d>;
+				interrupt-parent = <&gpio4>;
+				interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ptn5150>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						ptn5150_in_ep: endpoint {
+							remote-endpoint = <&usb_c_0_ss_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						ptn5150_out_ep: endpoint {
+							remote-endpoint = <&dwc3_0_ss_ep>;
+						};
+					};
+				};
+			};
+
+			power-sensor@40 {
+			    compatible = "ti,ina238";
+			    reg = <0x40>;
+			    shunt-resistor = <20000>;	/* 0.02 R */
+			    ti,shunt-gain = <1>;	/* Drop cca. 40mV */
+			};
+
+			eeprom_board: eeprom@54 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x54>;
+			};
+
+			pcieclk: clock@6b {
+				compatible = "skyworks,si52144";
+				reg = <0x6b>;
+				clocks = <&clk_xtal25>;
+				#clock-cells = <1>;
+			};
+		};
+
+		i2cmuxed1: i2c@1 {	/* HDMI DDC I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&ethphy0g {
+	reg = <7>;
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
+	phy-handle = <&ethphypdk>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */
+			compatible = "ethernet-phy-id0022.1642",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reg = <7>;
+			reset-assert-us = <1000>;
+			/* RESET_N signal rise time ~100ms */
+			reset-deassert-us = <120000>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcieclk 1>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&pcie {
+	fsl,max-link-speed = <3>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	usb-role-switch;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dwc3_0_hs_ep: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usb_c_0_hs_ep>;
+		};
+
+		dwc3_0_ss_ep: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ptn5150_out_ep>;
+		};
+	};
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+};
+
+&usb_dwc3_1 {
+	/* This port has USB5734 Hub connected to it, PWR/OC pins are unused */
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&iomuxc {
+	/*
+	 * GPIO_A,B,C,E are connected to buttons.
+	 * GPIO_D,F,G,I are connected to LEDs.
+	 * GPIO_H is connected to USB Hub RESET_N.
+	 * GPIO_M is connected to CLKOUT2.
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k
+		     &pinctrl_dhcom_l
+		     &pinctrl_dhcom_int>;
+
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x40000000
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
new file mode 100644
index 0000000000..cb1953d14a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -0,0 +1,1144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2022 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM SoM";
+	compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		rtc0 = &rv3032;
+		rtc1 = &snvs_rtc;
+		spi0 = &flexspi;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* Memory size 512 MiB..8 GiB will be filled by U-Boot */
+		reg = <0x0 0x40000000 0 0x08000000>;
+	};
+
+	reg_eth_vio: regulator-eth-vio {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&pinctrl_enet_vio>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "eth_vio";
+		vin-supply = <&buck4>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 19 0>; /* SD2_RESET */
+		off-on-delay-us = <12000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_SD";
+		startup-delay-us = <100>;
+		vin-supply = <&buck4>;
+	};
+
+	reg_vdd_3p3v_awo: regulator-vdd-3p3v-awo {	/* VDD_3V3_AWO */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VDD_3P3V_AWO";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-handle = <&ethphy0g>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Up to one of these two PHYs may be populated. */
+		ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */
+			compatible = "ethernet-phy-id0007.c110",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio3>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			/* Non-default PHY population option. */
+			status = "disabled";
+		};
+
+		ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */
+			compatible = "ethernet-phy-id0022.1642",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio3>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <5>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			/* Default PHY population option. */
+			status = "okay";
+		};
+	};
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_rmii>;
+	phy-handle = <&ethphy1f>;
+	phy-mode = "rmii";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Up to one PHY may be populated. */
+		ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+			compatible = "ethernet-phy-id0007.c110",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reg = <1>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			/* Non-default PHY population option. */
+			status = "disabled";
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {	/* W25Q128JWPIM */
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L",
+		"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DHCOM-K", "", "", "", "",
+		"", "", "", "", "DHCOM-INT", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "SOM-HW0", "",
+		"", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1",
+		"SOM-MEM2", "SOM-HW2", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "DHCOM-D", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "DHCOM-C", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "DHCOM-E", "DHCOM-F",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tc_bridge: bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		reg = <0xf>;
+		clock-names = "ref";
+		clocks = <&clk IMX8MP_CLK_CLKOUT2>;
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT2_SEL>,
+				  <&clk IMX8MP_CLK_CLKOUT2>,
+				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
+		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tc_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8CVNKZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4: BUCK4 {	/* VDD_3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* VDD_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* PMIC_LDO4 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	adc@48 {
+		compatible = "ti,tla2024";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {	/* Voltage over AIN0 and AIN1. */
+			reg = <0>;
+		};
+
+		channel@1 {	/* Voltage over AIN0 and AIN3. */
+			reg = <1>;
+		};
+
+		channel@2 {	/* Voltage over AIN1 and AIN3. */
+			reg = <2>;
+		};
+
+		channel@3 {	/* Voltage over AIN2 and AIN3. */
+			reg = <3>;
+		};
+
+		channel@4 {	/* Voltage over AIN0 and GND. */
+			reg = <4>;
+		};
+
+		channel@5 {	/* Voltage over AIN1 and GND. */
+			reg = <5>;
+		};
+
+		channel@6 {	/* Voltage over AIN2 and GND. */
+			reg = <6>;
+		};
+
+		channel@7 {	/* Voltage over AIN3 and GND. */
+			reg = <7>;
+		};
+	};
+
+	touchscreen@49 {
+		compatible = "ti,tsc2004";
+		reg = <0x49>;
+		interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		vio-supply = <&buck4>;
+	};
+
+	eeprom0: eeprom@50 {	/* EEPROM with EQoS MAC address */
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rv3032: rtc@51 {
+		compatible = "microcrystal,rv3032";
+		reg = <0x51>;
+		interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+	};
+
+	eeprom1: eeprom@53 {	/* EEPROM with FEC MAC address */
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x53>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <160000000>;
+	samsung,esc-clock-frequency = <10000000>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&tc_bridge_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&uart1 {
+	/* CA53 console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	/* Bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+
+	/*
+	 * PLL1 at 80 MHz supplies UART2 root with 80 MHz clock,
+	 * which with 16x oversampling yields 5 Mbdps baud base,
+	 * which can be well divided by 5/4 to achieve 4 Mbdps,
+	 * which is exactly the maximum rate supported by muRata
+	 * 2AE bluetooth UART.
+	 */
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	assigned-clock-rates = <80000000>;
+
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart2_bt>;
+		compatible = "cypress,cyw4373a0-bt";
+		shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_vbus>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&buck4>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {	/* muRata 2AE */
+		reg = <1>;
+		compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
+		/*
+		 * The "host-wake" interrupt output is by default not
+		 * connected to the SoC, but can be connected on to
+		 * SoC pin on the carrier board.
+		 */
+		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* SD slot */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
+		     &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+		     /* GPIO_M is connected to CLKOUT1 */
+		     &pinctrl_dhcom_int>;
+	pinctrl-names = "default";
+
+	pinctrl_dhcom_a: dhcom-a-grp {
+		fsl,pins = <
+			/* ENET_QOS_EVENT0-OUT */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x2
+		>;
+	};
+
+	pinctrl_dhcom_b: dhcom-b-grp {
+		fsl,pins = <
+			/* ENET_QOS_EVENT0-IN */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x2
+		>;
+	};
+
+	pinctrl_dhcom_c: dhcom-c-grp {
+		fsl,pins = <
+			/* GPIO_C */
+			MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02		0x2
+		>;
+	};
+
+	pinctrl_dhcom_d: dhcom-d-grp {
+		fsl,pins = <
+			/* GPIO_D */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x2
+		>;
+	};
+
+	pinctrl_dhcom_e: dhcom-e-grp {
+		fsl,pins = <
+			/* GPIO_E */
+			MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22		0x2
+		>;
+	};
+
+	pinctrl_dhcom_f: dhcom-f-grp {
+		fsl,pins = <
+			/* GPIO_F */
+			MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23		0x2
+		>;
+	};
+
+	pinctrl_dhcom_g: dhcom-g-grp {
+		fsl,pins = <
+			/* GPIO_G */
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x2
+		>;
+	};
+
+	pinctrl_dhcom_h: dhcom-h-grp {
+		fsl,pins = <
+			/* GPIO_H */
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x2
+		>;
+	};
+
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <
+			/* CSI1_SYNC */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x2
+		>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <
+			/* CSIx_#RST */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x2
+		>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <
+			/* CSIx_PWDN */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x2
+		>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <
+			/* CSI2_SYNC */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x2
+		>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <
+			/* INT_HIGHEST_PRIO */
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20			0x2
+		>;
+	};
+
+	pinctrl_hog_base: dhcom-hog-base-grp {
+		fsl,pins = <
+			/* GPIOs for memory coding */
+			MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22		0x40000080
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x40000080
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x40000080
+			/* GPIOs for hardware coding */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x40000080
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x40000080
+			MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25		0x40000080
+		>;
+	};
+
+	pinctrl_ecspi1: dhcom-ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x40
+		>;
+	};
+
+	pinctrl_ecspi2: dhcom-ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40
+		>;
+	};
+
+	pinctrl_eqos_rgmii: dhcom-eqos-rgmii-grp {	/* RGMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+		>;
+	};
+
+	pinctrl_eqos_rmii: dhcom-eqos-rmii-grp {	/* RMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER		0x1f
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			/* Clock */
+			MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000001f
+		>;
+	};
+
+	pinctrl_enet_vio: dhcom-enet-vio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x22
+		>;
+	};
+
+	pinctrl_ethphy0: dhcom-ethphy0-grp {
+		fsl,pins = <
+			/* ENET_QOS_#RST Reset */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x22
+			/* ENET_QOS_#INT Interrupt */
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x22
+		>;
+	};
+
+	pinctrl_ethphy1: dhcom-ethphy1-grp {
+		fsl,pins = <
+			/* ENET1_#RST Reset */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x11
+			/* ENET1_#INT Interrupt */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x11
+		>;
+	};
+
+	pinctrl_fec_rgmii: dhcom-fec-rgmii-grp {	/* RGMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK		0x1f
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER		0x1f
+		>;
+	};
+
+	pinctrl_fec_rmii: dhcom-fec-rmii-grp {	/* RMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER		0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			/* Clock */
+			MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK		0x4000001f
+		>;
+	};
+
+	pinctrl_flexcan1: dhcom-flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_flexcan2: dhcom-flexcan2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__CAN2_TX			0x154
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX			0x154
+		>;
+	};
+
+	pinctrl_flexspi: dhcom-flexspi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82
+		>;
+	};
+
+	pinctrl_hdmi: dhcom-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	pinctrl_i2c3: dhcom-i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x40000084
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x84
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x84
+		>;
+	};
+
+	pinctrl_i2c4: dhcom-i2c4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x40000084
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x84
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x84
+		>;
+	};
+
+	pinctrl_i2c5: dhcom-i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x40000084
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x40000084
+		>;
+	};
+
+	pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x84
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x84
+		>;
+	};
+
+	pinctrl_pmic: dhcom-pmic-grp {
+		fsl,pins = <
+			/* PMIC_nINT */
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40000090
+		>;
+	};
+
+	pinctrl_pwm1: dhcom-pwm1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT		0x6
+		>;
+	};
+
+	pinctrl_rtc: dhcom-rtc-grp {
+		fsl,pins = <
+			/* RTC_#INT Interrupt */
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x40000080
+		>;
+	};
+
+	pinctrl_tc9595: dhcom-tc9595-grp {
+		fsl,pins = <
+			/* RESET_DSIBRIDGE */
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x40000146
+			/* DSI-CONV_INT Interrupt */
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x141
+		>;
+	};
+
+	pinctrl_sai3: dhcom-sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_touch: dhcom-touch-grp {
+		fsl,pins = <
+			/* #TOUCH_INT */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x40000080
+		>;
+	};
+
+	pinctrl_uart1: dhcom-uart1-grp {
+		fsl,pins = <
+			/* Console UART */
+			MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x49
+			MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX		0x49
+			MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x49
+			MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart2: dhcom-uart2-grp {
+		fsl,pins = <
+			/* Bluetooth UART */
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS		0x49
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart2_bt: dhcom-uart2-bt-grp {
+		fsl,pins = <
+			/* BT_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
+		>;
+	};
+
+	pinctrl_uart3: dhcom-uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x49
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x49
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x49
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart4: dhcom-uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usb0_vbus: dhcom-usb0-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID		0x0
+		>;
+	};
+
+	pinctrl_usb1_vbus: dhcom-usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR		0x6
+			MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC		0x80
+		>;
+	};
+
+	pinctrl_usdhc1: dhcom-usdhc1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+			/* WL_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+			/* WL_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+			/* WL_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
+		>;
+	};
+
+	pinctrl_usdhc2: dhcom-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x20
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x40000080
+		>;
+	};
+
+	pinctrl_usdhc3: dhcom-usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_wdog: dhcom-wdog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
new file mode 100644
index 0000000000..cc9d468b43
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -0,0 +1,934 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "NXP i.MX8MPlus EVK board";
+	compatible = "fsl,imx8mp-evk", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "yellow:status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audio_pwr_reg>;
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-stby";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie0_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8960-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"External Speaker", "SPK_LP",
+			"External Speaker", "SPK_LN",
+			"External Speaker", "SPK_RP",
+			"External Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"Mic Jack", "MICB";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8960>;
+		};
+
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "disabled";/* can2 pin conflict with pdm */
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1045000>;
+				regulator-max-microvolt = <1155000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <3 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+	};
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca6416_int>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "EXT_PWREN1",
+			"EXT_PWREN2",
+			"CAN1/I2C5_SEL",
+			"PDM/CAN2_SEL",
+			"FAN_EN",
+			"PWR_MEAS_IO1",
+			"PWR_MEAS_IO2",
+			"EXP_P0_7",
+			"EXP_P1_0",
+			"EXP_P1_1",
+			"EXP_P1_2",
+			"EXP_P1_3",
+			"EXP_P1_4",
+			"EXP_P1_5",
+			"EXP_P1_6",
+			"EXP_P1_7";
+	};
+};
+
+/* I2C on expansion connector J22. */
+&i2c5 {
+	clock-frequency = <100000>; /* Lower clock speed for external bus. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	status = "disabled"; /* can1 pins conflict with i2c5 */
+
+	/* GPIO 2 of PCA6416 is used to switch between CAN1 and I2C5 functions:
+	 *     LOW:  CAN1 (default, pull-down)
+	 *     HIGH: I2C5
+	 * You need to set it to high to enable I2C5 (for example, add gpio-hog
+	 * in pca6416 node).
+	 */
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7533_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audio_pwr_reg: audiopwrreggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0xd6
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x10
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x16
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x10
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX          0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX          0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX         0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX         0x154
+		>;
+	};
+
+	pinctrl_flexcan1_reg: flexcan1reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05  0x154   /* CAN1_STBY */
+		>;
+	};
+
+	pinctrl_flexcan2_reg: flexcan2reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154   /* CAN2_STBY */
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA         0x400001c2
+			MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL         0x400001c2
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x60 /* open drain, pull up */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x40
+		>;
+	};
+
+	pinctrl_pcie0_reg: pcie0reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0
+		>;
+	};
+
+	pinctrl_pca6416_int: pca6416_int_grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x146 /* Input pull-up. */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT	0x116
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usb1_vbus: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x10
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
new file mode 100644
index 0000000000..a02b31c42d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-icore-mx8mp.dtsi"
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit";
+	compatible = "engicam,icore-mx8mp-edimm2.2", "engicam,icore-mx8mp",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb1_host_vbus";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDCARD */
+&usdhc2 {
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	pinctrl-names = "default" ;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07				0x10
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x40
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x10
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
new file mode 100644
index 0000000000..a6319824ea
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+	compatible = "engicam,icore-mx8mp", "fsl,imx8mp";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x25>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2  {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3600000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "BUCK4";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "BUCK5";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "BUCK6";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "LDO1";
+			};
+
+			ldo3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1890000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "LDO3";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+/* EMMC */
+&usdhc3 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	  0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
new file mode 100644
index 0000000000..2f5cc013e8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>; /* bank0, 2GiB */
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&soc_alert0 {
+	temperature = <95000>;
+};
+
+&soc_crit0 {
+	temperature = <105000>;
+};
+
+&tca6424 {
+	gbe0-int-hog {
+		gpio-hog;
+		input;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+	};
+
+	gbe1-int-hog {
+		gpio-hog;
+		input;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+	};
+
+	cam2-rst-hog {
+		gpio-hog;
+		output-high;
+		gpios = <9 GPIO_ACTIVE_LOW>;
+	};
+
+	cam2-pwr-hog {
+		gpio-hog;
+		output-high;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+	};
+
+	tpm-int-hog {
+		gpio-hog;
+		input;
+		gpios = <13 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi-int-hog {
+		gpio-hog;
+		input;
+		gpios = <14 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
new file mode 100644
index 0000000000..e4215c83ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s-14N0600E.dtsi"
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-QC6-14N0600E SoM";
+	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
+		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
+		     "fsl,imx8mp";
+
+	reg_vcc_3v3_audio: 3v3-audio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_AUD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8_audio: 1v8-audio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_AUD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,bitclock-master = <&codec_dai>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>;
+		assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
+		#sound-dai-cells = <0>;
+
+		VDDA-supply  = <&reg_vcc_3v3_audio>;
+		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDIO-supply = <&reg_vcc_1v8_audio>;
+	};
+};
+
+/* I2S-0 = sai2 */
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+&usdhc2 {
+	no-1-8-v;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_gpio>;
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK    0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+		>;
+	};
+
+	pinctrl_smarc_gpio: smarcgpiosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x19>, /* GPIO0 */
+			<MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x19>, /* GPIO1 */
+			<MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x19>, /* GPIO2 */
+			<MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x19>, /* GPIO3 */
+			<MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x19>, /* GPIO4 */
+			<MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x19>, /* GPIO5 */
+			<MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x19>, /* GPIO6 */
+			<MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x19>, /* GPIO7 */
+			<MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x19>, /* GPIO8 */
+			<MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x19>, /* GPIO9 */
+			<MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x19>, /* GPIO10 */
+			<MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x19>, /* GPIO11 */
+			<MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x19>, /* GPIO12 */
+			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19>; /* GPIO13 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
new file mode 100644
index 0000000000..61c2a63efc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
@@ -0,0 +1,820 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		rtc0 = &sys_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_usb0_host_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_host_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_vbus>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_host_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_flexcan1_xceiver: regulator-flexcan1 {
+		compatible = "regulator-fixed";
+		regulator-name = "flexcan1-xceiver";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_flexcan2_xceiver: regulator-flexcan2 {
+		compatible = "regulator-fixed";
+		regulator-name = "flexcan2-xceiver";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcd0_backlight: backlight-0 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_backlight>;
+		pwms = <&pwm1 0 100000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	lcd1_backlight: backlight-1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_backlight>;
+		pwms = <&pwm2 0 100000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+		status = "okay";
+
+		led-sw {
+			label = "sw-led";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	extcon_usb0: extcon-usb0 {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_extcon>;
+		id-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&tca6424 16 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&tca6424 17 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	id_eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tca6424: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tca6424>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#", "BOOT_SEL2#",
+			"gbe0_int", "gbe1_int", "pmic_int", "rtc_int", "lvds_int",
+			"PCIE_WAKE#", "cam2_rst", "cam2_pwr", "SLEEP#",
+			"wifi_pd", "tpm_int", "wifi_int", "PCIE_A_RST#",
+			"gbe0_rst", "gbe1_rst", "LID#", "BATLOW#", "CHARGING#",
+			"CHARGER_PRSNT#";
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	dsi_lvds_bridge: bridge@2d {
+		compatible = "ti,sn65dsi83";
+		reg = <0x2d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bridge>;
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	pmic: pmic@30 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x30>;
+		interrupt-parent = <&tca6424>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			DCDC1 {
+				regulator-name = "VCC_SOC";
+				regulator-always-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+			};
+
+			DCDC2 {
+				regulator-name = "VCC_DRAM";
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vcc_arm: DCDC3 {
+				regulator-name = "VCC_ARM";
+				regulator-always-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+			};
+
+			DCDC4 {
+				regulator-name = "VCC_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO1 {
+				regulator-name = "VCC_LDO1_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO2 {
+				regulator-name = "VCC_LDO2_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO3 {
+				regulator-name = "VCC_ETH_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO4 {
+				regulator-name = "VCC_DDR4_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO5 {
+				regulator-name = "VCC_LDO5_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDORTC1 {
+				regulator-name = "VCC_SNVS_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDORTC2 {
+				regulator-name = "VCC_SNVS_3V3";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	sys_rtc: rtc@32 {
+		compatible = "ricoh,r2221tl";
+		reg = <0x32>;
+		interrupt-parent = <&tca6424>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	tmp_sensor: temperature-sensor@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_flexcan1_xceiver>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_flexcan2_xceiver>;
+	status = "disabled";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	qspi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb0_host_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb1_host_vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	extcon = <&extcon_usb0>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0		0x40000>,
+			<MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x40000>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0		0x40000>,
+			<MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x40000>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3>,
+			<MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3>,
+			<MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91>,
+			<MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91>,
+			<MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91>,
+			<MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91>,
+			<MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91>,
+			<MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91>,
+			<MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f>,
+			<MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f>,
+			<MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3>,
+			<MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3>,
+			<MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x91>,
+			<MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91>,
+			<MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x1f>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154>,
+			<MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154>,
+			<MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2>,
+			<MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82>,
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x19>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c3>;
+	};
+
+	pinctrl_lcd0_backlight: lcd0-backlightgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x41>;
+	};
+
+	pinctrl_lcd1_backlight: lcd1-backlightgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x41>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x19>;
+	};
+
+	pinctrl_lvds_bridge: lvds-bridgegrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x41>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x116>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x116>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT		0x116>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT		0x116>;
+	};
+
+	pinctrl_tca6424: tca6424grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x41>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x1c4>,
+			<MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x1c4>,
+			<MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>,
+			<MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x1c4>,
+			<MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49>;
+	};
+
+	pinctrl_usb0_extcon: usb0-extcongrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x19>;
+	};
+
+	pinctrl_usb0_vbus: usb0-vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x19>;
+	};
+
+	pinctrl_usb1_vbus: usb1-vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x19>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4>,
+			<MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x1c4>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
new file mode 100644
index 0000000000..1e14c4cd31
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Pollux i.MX8MP";
+	compatible = "phytec,imx8mp-phyboard-pollux-rdk",
+		     "phytec,imx8mp-phycore-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			enet-phy-lane-no-swap;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* debug console */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20			0x10
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1e2
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1e2
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x40
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x40
+		>;
+	};
+
+	pinctrl_usdhc2_pins: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
new file mode 100644
index 0000000000..d8df97060e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX8MP";
+	compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+/* ethernet 1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	som_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "VDD_3V3 (BUCK4)";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDD_1V8 (BUCK5)";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "NVCC_DRAM_1V1 (BUCK6)";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+			};
+
+			ldo3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDDA_1V8 (LDO3)";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SD2 (LDO5)";
+			};
+		};
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		trickle-resistor-ohms = <3000>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x12
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x12
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x14
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x14
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x14
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x14
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e2
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x140
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xe6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
new file mode 100644
index 0000000000..0fef066471
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -0,0 +1,799 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __DTS_IMX8MP_PINFUNC_H
+#define __DTS_IMX8MP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00                          0x014 0x274 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT           0x014 0x274 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0                       0x014 0x274 0x5D4 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1                        0x014 0x274 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01                          0x018 0x278 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT                            0x018 0x278 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0                  0x018 0x278 0x5DC 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2                        0x018 0x278 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02                          0x01C 0x27C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B                        0x01C 0x27C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__ISP_FLASH_TRIG_0                    0x01C 0x27C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_ANY                      0x01C 0x27C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__SJC_DE_B                            0x01C 0x27C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03                          0x020 0x280 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT                      0x020 0x280 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__ISP_PRELIGHT_TRIG_0                 0x020 0x280 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__SDMA1_EXT_EVENT00                   0x020 0x280 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04                          0x024 0x284 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT                      0x024 0x284 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__ISP_SHUTTER_OPEN_0                  0x024 0x284 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__SDMA1_EXT_EVENT01                   0x024 0x284 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05                          0x028 0x288 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__M7_NMI                              0x028 0x288 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__ISP_FL_TRIG_1                       0x028 0x288 0x5D8 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__CCM_PMIC_READY                      0x028 0x288 0x554 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06                          0x02C 0x28C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ENET_QOS_MDC                        0x02C 0x28C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ISP_SHUTTER_TRIG_1                  0x02C 0x28C 0x5E0 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B                         0x02C 0x28C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__CCM_EXT_CLK3                        0x02C 0x28C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07                          0x030 0x290 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ENET_QOS_MDIO                       0x030 0x290 0x590 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ISP_FLASH_TRIG_1                    0x030 0x290 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP                           0x030 0x290 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__CCM_EXT_CLK4                        0x030 0x290 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08                          0x034 0x294 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_IN             0x034 0x294 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__PWM1_OUT                            0x034 0x294 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ISP_PRELIGHT_TRIG_1                 0x034 0x294 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_AUX_IN         0x034 0x294 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__USDHC2_RESET_B                      0x034 0x294 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09                          0x038 0x298 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT            0x038 0x298 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT                            0x038 0x298 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__ISP_SHUTTER_OPEN_1                  0x038 0x298 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B                      0x038 0x298 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__SDMA2_EXT_EVENT00                   0x038 0x298 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10                          0x03C 0x29C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID                         0x03C 0x29C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT                            0x03C 0x29C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11                          0x040 0x2A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID                         0x040 0x2A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT                            0x040 0x2A0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__USDHC3_VSELECT                      0x040 0x2A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__CCM_PMIC_READY                      0x040 0x2A0 0x554 0x5 0x1
+#define MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12                          0x044 0x2A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR                        0x044 0x2A4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__SDMA2_EXT_EVENT01                   0x044 0x2A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13                          0x048 0x2A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC                         0x048 0x2A8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__PWM2_OUT                            0x048 0x2A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                          0x04C 0x2AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR                        0x04C 0x2AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__USDHC3_CD_B                         0x04C 0x2AC 0x608 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT                            0x04C 0x2AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1                           0x04C 0x2AC 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                          0x050 0x2B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC                         0x050 0x2B0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__USDHC3_WP                           0x050 0x2B0 0x634 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT                            0x050 0x2B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2                           0x050 0x2B0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC                          0x054 0x2B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_MDC__AUDIOMIX_SAI6_TX_DATA00               0x054 0x2B4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16                            0x054 0x2B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDC__USDHC3_STROBE                         0x054 0x2B4 0x630 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO                        0x058 0x2B8 0x590 0x0 0x1
+#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_SAI6_TX_SYNC                0x058 0x2B8 0x528 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_PDM_BIT_STREAM03            0x058 0x2B8 0x4CC 0x3 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17                           0x058 0x2B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__USDHC3_DATA5                         0x058 0x2B8 0x624 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3                    0x05C 0x2BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_SAI6_TX_BCLK                 0x05C 0x2BC 0x524 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_PDM_BIT_STREAM02             0x05C 0x2BC 0x4C8 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD3__GPIO1_IO18                            0x05C 0x2BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD3__USDHC3_DATA6                          0x05C 0x2BC 0x628 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2                    0x060 0x2C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK   0x060 0x2C0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_SAI6_RX_DATA00               0x060 0x2C0 0x51C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_PDM_BIT_STREAM01             0x060 0x2C0 0x4C4 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19                            0x060 0x2C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD2__USDHC3_DATA7                          0x060 0x2C0 0x62C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1                    0x064 0x2C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_SAI6_RX_SYNC                 0x064 0x2C4 0x520 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_PDM_BIT_STREAM00             0x064 0x2C4 0x4C0 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20                            0x064 0x2C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD1__USDHC3_CD_B                           0x064 0x2C4 0x608 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0                    0x068 0x2C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_SAI6_RX_BCLK                 0x068 0x2C8 0x518 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_PDM_CLK                      0x068 0x2C8 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21                            0x068 0x2C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD0__USDHC3_WP                             0x068 0x2C8 0x634 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL              0x06C 0x2CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SAI6_MCLK                 0x06C 0x2CC 0x514 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF1_OUT                0x06C 0x2CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22                         0x06C 0x2CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__USDHC3_DATA0                       0x06C 0x2CC 0x610 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK    0x070 0x2D0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TXC__ENET_QOS_TX_ER                        0x070 0x2D0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TXC__AUDIOMIX_SAI7_TX_DATA00               0x070 0x2D0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23                            0x070 0x2D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TXC__USDHC3_DATA1                          0x070 0x2D0 0x614 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x074 0x2D4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC              0x074 0x2D4 0x540 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_PDM_BIT_STREAM03          0x074 0x2D4 0x4CC 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24                         0x074 0x2D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2                       0x074 0x2D4 0x618 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x078 0x2D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER                        0x078 0x2D8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK                 0x078 0x2D8 0x53C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_PDM_BIT_STREAM02             0x078 0x2D8 0x4C8 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25                            0x078 0x2D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3                          0x078 0x2D8 0x61C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0                    0x07C 0x2DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00               0x07C 0x2DC 0x534 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_PDM_BIT_STREAM01             0x07C 0x2DC 0x4C4 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26                            0x07C 0x2DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4                          0x07C 0x2DC 0x620 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1                    0x080 0x2E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC                 0x080 0x2E0 0x538 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_PDM_BIT_STREAM00             0x080 0x2E0 0x4C0 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27                            0x080 0x2E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B                        0x080 0x2E0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2                    0x084 0x2E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_SAI7_RX_BCLK                 0x084 0x2E4 0x530 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_PDM_CLK                      0x084 0x2E4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD2__GPIO1_IO28                            0x084 0x2E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD2__USDHC3_CLK                            0x084 0x2E4 0x604 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3                    0x088 0x2E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SAI7_MCLK                    0x088 0x2E8 0x52C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF1_IN                    0x088 0x2E8 0x544 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29                            0x088 0x2E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD3__USDHC3_CMD                            0x088 0x2E8 0x60C 0x6 0x0
+#define MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK                             0x08C 0x2EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CLK__ENET1_MDC                              0x08C 0x2EC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CLK__I2C5_SCL                               0x08C 0x2EC 0x5C4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX                           0x08C 0x2EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DTE_RX                           0x08C 0x2EC 0x5E8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00                             0x08C 0x2EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD                             0x090 0x2F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CMD__ENET1_MDIO                             0x090 0x2F0 0x57C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CMD__I2C5_SDA                               0x090 0x2F0 0x5C8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX                           0x090 0x2F0 0x5E8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DTE_TX                           0x090 0x2F0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01                             0x090 0x2F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0                         0x094 0x2F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__ENET1_RGMII_TD1                      0x094 0x2F4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL                             0x094 0x2F4 0x5CC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DCE_RTS                        0x094 0x2F4 0x5E4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DTE_CTS                        0x094 0x2F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02                           0x094 0x2F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1                         0x098 0x2F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__ENET1_RGMII_TD0                      0x098 0x2F8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA                             0x098 0x2F8 0x5D0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS                        0x098 0x2F8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DTE_RTS                        0x098 0x2F8 0x5E4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03                           0x098 0x2F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2                         0x09C 0x2FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__ENET1_RGMII_RD0                      0x09C 0x2FC 0x580 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__I2C4_SCL                             0x09C 0x2FC 0x5BC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX                         0x09C 0x2FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DTE_RX                         0x09C 0x2FC 0x5F0 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04                           0x09C 0x2FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3                         0x0A0 0x300 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__ENET1_RGMII_RD1                      0x0A0 0x300 0x584 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__I2C4_SDA                             0x0A0 0x300 0x5C0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX                         0x0A0 0x300 0x5F0 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DTE_TX                         0x0A0 0x300 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05                           0x0A0 0x300 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4                         0x0A4 0x304 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__ENET1_RGMII_TX_CTL                   0x0A4 0x304 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL                             0x0A4 0x304 0x5A4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS                        0x0A4 0x304 0x5EC 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS                        0x0A4 0x304 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06                           0x0A4 0x304 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5                         0x0A8 0x308 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__ENET1_TX_ER                          0x0A8 0x308 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA                             0x0A8 0x308 0x5A8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS                        0x0A8 0x308 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS                        0x0A8 0x308 0x5EC 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07                           0x0A8 0x308 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6                         0x0AC 0x30C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__ENET1_RGMII_RX_CTL                   0x0AC 0x30C 0x588 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__I2C2_SCL                             0x0AC 0x30C 0x5AC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX                         0x0AC 0x30C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX                         0x0AC 0x30C 0x5F8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08                           0x0AC 0x30C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7                         0x0B0 0x310 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__ENET1_RX_ER                          0x0B0 0x310 0x58C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__I2C2_SDA                             0x0B0 0x310 0x5B0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX                         0x0B0 0x310 0x5F8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX                         0x0B0 0x310 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09                           0x0B0 0x310 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B                     0x0B4 0x314 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__ENET1_TX_CLK                       0x0B4 0x314 0x578 0x1 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL                           0x0B4 0x314 0x5B4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS                      0x0B4 0x314 0x5F4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS                      0x0B4 0x314 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10                         0x0B4 0x314 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE                       0x0B8 0x318 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA                            0x0B8 0x318 0x5B8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS                       0x0B8 0x318 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS                       0x0B8 0x318 0x5F4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11                          0x0B8 0x318 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B                           0x0BC 0x31C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12                            0x0BC 0x31C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                             0x0C0 0x320 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CLK__ECSPI2_SCLK                            0x0C0 0x320 0x568 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DCE_RX                           0x0C0 0x320 0x600 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DTE_TX                           0x0C0 0x320 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13                             0x0C0 0x320 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                             0x0C4 0x324 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CMD__ECSPI2_MOSI                            0x0C4 0x324 0x570 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DCE_TX                           0x0C4 0x324 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DTE_RX                           0x0C4 0x324 0x600 0x3 0x1
+#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_PDM_CLK                       0x0C4 0x324 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14                             0x0C4 0x324 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                         0x0C8 0x328 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA                             0x0C8 0x328 0x5C0 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX                         0x0C8 0x328 0x5F0 0x3 0x2
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX                         0x0C8 0x328 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_PDM_BIT_STREAM00            0x0C8 0x328 0x4C0 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15                           0x0C8 0x328 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                         0x0CC 0x32C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__I2C4_SCL                             0x0CC 0x32C 0x5BC 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DCE_TX                         0x0CC 0x32C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DTE_RX                         0x0CC 0x32C 0x5F0 0x3 0x3
+#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_PDM_BIT_STREAM01            0x0CC 0x32C 0x4C4 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16                           0x0CC 0x32C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                         0x0D0 0x330 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__ECSPI2_SS0                           0x0D0 0x330 0x574 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF1_OUT                  0x0D0 0x330 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_PDM_BIT_STREAM02            0x0D0 0x330 0x4C8 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17                           0x0D0 0x330 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                         0x0D4 0x334 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO                          0x0D4 0x334 0x56C 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF1_IN                   0x0D4 0x334 0x544 0x3 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_PDM_BIT_STREAM03            0x0D4 0x334 0x4CC 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18                           0x0D4 0x334 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__SRC_EARLY_RESET                      0x0D4 0x334 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B                     0x0D8 0x338 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19                         0x0D8 0x338 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__SRC_SYSTEM_RESET                   0x0D8 0x338 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_WP__USDHC2_WP                               0x0DC 0x33C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_WP__GPIO2_IO20                              0x0DC 0x33C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_WP__CORESIGHT_EVENTI                        0x0DC 0x33C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_ALE__NAND_ALE                              0x0E0 0x340 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK                        0x0E0 0x340 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_ALE__AUDIOMIX_SAI3_TX_BCLK                 0x0E0 0x340 0x4E8 0x2 0x0
+#define MX8MP_IOMUXC_NAND_ALE__ISP_FL_TRIG_0                         0x0E0 0x340 0x5D4 0x3 0x1
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX                          0x0E0 0x340 0x5F8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DTE_TX                          0x0E0 0x340 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00                            0x0E0 0x340 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_ALE__CORESIGHT_TRACE_CLK                   0x0E0 0x340 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__NAND_CE0_B                          0x0E4 0x344 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B                     0x0E4 0x344 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__AUDIOMIX_SAI3_TX_DATA00             0x0E4 0x344 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__ISP_SHUTTER_TRIG_0                  0x0E4 0x344 0x5DC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX                        0x0E4 0x344 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DTE_RX                        0x0E4 0x344 0x5F8 0x4 0x3
+#define MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01                          0x0E4 0x344 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__CORESIGHT_TRACE_CTL                 0x0E4 0x344 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__NAND_CE1_B                          0x0E8 0x348 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__FLEXSPI_A_SS1_B                     0x0E8 0x348 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE                       0x0E8 0x348 0x630 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE1_B__I2C4_SCL                            0x0E8 0x348 0x5BC 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02                          0x0E8 0x348 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__CORESIGHT_TRACE00                   0x0E8 0x348 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__NAND_CE2_B                          0x0EC 0x34C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__FLEXSPI_B_SS0_B                     0x0EC 0x34C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5                        0x0EC 0x34C 0x624 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE2_B__I2C4_SDA                            0x0EC 0x34C 0x5C0 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE2_B__GPIO3_IO03                          0x0EC 0x34C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__CORESIGHT_TRACE01                   0x0EC 0x34C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__NAND_CE3_B                          0x0F0 0x350 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__FLEXSPI_B_SS1_B                     0x0F0 0x350 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6                        0x0F0 0x350 0x628 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__I2C3_SDA                            0x0F0 0x350 0x5B8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__GPIO3_IO04                          0x0F0 0x350 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__CORESIGHT_TRACE02                   0x0F0 0x350 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CLE__NAND_CLE                              0x0F4 0x354 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CLE__FLEXSPI_B_SCLK                        0x0F4 0x354 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7                          0x0F4 0x354 0x62C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DCE_RX                          0x0F4 0x354 0x600 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DTE_TX                          0x0F4 0x354 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CLE__GPIO3_IO05                            0x0F4 0x354 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CLE__CORESIGHT_TRACE03                     0x0F4 0x354 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__NAND_DATA00                        0x0F8 0x358 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00                   0x0F8 0x358 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__AUDIOMIX_SAI3_RX_DATA00            0x0F8 0x358 0x4E4 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__ISP_FLASH_TRIG_0                   0x0F8 0x358 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX                       0x0F8 0x358 0x600 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DTE_TX                       0x0F8 0x358 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06                         0x0F8 0x358 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__CORESIGHT_TRACE04                  0x0F8 0x358 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__NAND_DATA01                        0x0FC 0x35C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01                   0x0FC 0x35C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC              0x0FC 0x35C 0x4EC 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__ISP_PRELIGHT_TRIG_0                0x0FC 0x35C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DCE_TX                       0x0FC 0x35C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DTE_RX                       0x0FC 0x35C 0x600 0x4 0x4
+#define MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07                         0x0FC 0x35C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__CORESIGHT_TRACE05                  0x0FC 0x35C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__NAND_DATA02                        0x100 0x360 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02                   0x100 0x360 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__USDHC3_CD_B                        0x100 0x360 0x608 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS                      0x100 0x360 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DTE_RTS                      0x100 0x360 0x5FC 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__I2C4_SDA                           0x100 0x360 0x5C0 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08                         0x100 0x360 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__CORESIGHT_TRACE06                  0x100 0x360 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__NAND_DATA03                        0x104 0x364 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03                   0x104 0x364 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__USDHC3_WP                          0x104 0x364 0x634 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS                      0x104 0x364 0x5FC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DTE_CTS                      0x104 0x364 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__ISP_FL_TRIG_1                      0x104 0x364 0x5D8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09                         0x104 0x364 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__CORESIGHT_TRACE07                  0x104 0x364 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__NAND_DATA04                        0x108 0x368 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_B_DATA00                   0x108 0x368 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0                       0x108 0x368 0x610 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_A_DATA04                   0x108 0x368 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__ISP_SHUTTER_TRIG_1                 0x108 0x368 0x5E0 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10                         0x108 0x368 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__CORESIGHT_TRACE08                  0x108 0x368 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__NAND_DATA05                        0x10C 0x36C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_B_DATA01                   0x10C 0x36C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1                       0x10C 0x36C 0x614 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_A_DATA05                   0x10C 0x36C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__ISP_FLASH_TRIG_1                   0x10C 0x36C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11                         0x10C 0x36C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__CORESIGHT_TRACE09                  0x10C 0x36C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__NAND_DATA06                        0x110 0x370 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_B_DATA02                   0x110 0x370 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2                       0x110 0x370 0x618 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_A_DATA06                   0x110 0x370 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__ISP_PRELIGHT_TRIG_1                0x110 0x370 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12                         0x110 0x370 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__CORESIGHT_TRACE10                  0x110 0x370 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__NAND_DATA07                        0x114 0x374 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_B_DATA03                   0x114 0x374 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3                       0x114 0x374 0x61C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_A_DATA07                   0x114 0x374 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__ISP_SHUTTER_OPEN_1                 0x114 0x374 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13                         0x114 0x374 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__CORESIGHT_TRACE11                  0x114 0x374 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DQS__NAND_DQS                              0x118 0x378 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS                         0x118 0x378 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DQS__AUDIOMIX_SAI3_MCLK                    0x118 0x378 0x4E0 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DQS__ISP_SHUTTER_OPEN_0                    0x118 0x378 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DQS__I2C3_SCL                              0x118 0x378 0x5B4 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14                            0x118 0x378 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DQS__CORESIGHT_TRACE12                     0x118 0x378 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__NAND_RE_B                            0x11C 0x37C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__FLEXSPI_B_DQS                        0x11C 0x37C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4                         0x11C 0x37C 0x620 0x2 0x1
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DCE_TX                         0x11C 0x37C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DTE_RX                         0x11C 0x37C 0x600 0x4 0x5
+#define MX8MP_IOMUXC_NAND_RE_B__GPIO3_IO15                           0x11C 0x37C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__CORESIGHT_TRACE13                    0x11C 0x37C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__NAND_READY_B                      0x120 0x380 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B                    0x120 0x380 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__I2C3_SCL                          0x120 0x380 0x5B4 0x4 0x2
+#define MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16                        0x120 0x380 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__CORESIGHT_TRACE14                 0x120 0x380 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__NAND_WE_B                            0x124 0x384 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK                           0x124 0x384 0x604 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WE_B__I2C3_SDA                             0x124 0x384 0x5B8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17                           0x124 0x384 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__CORESIGHT_TRACE15                    0x124 0x384 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__NAND_WP_B                            0x128 0x388 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD                           0x128 0x388 0x60C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WP_B__I2C4_SCL                             0x128 0x388 0x5BC 0x4 0x3
+#define MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18                           0x128 0x388 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__CORESIGHT_EVENTO                     0x128 0x388 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x12C 0x38C 0x508 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00              0x12C 0x38C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT                             0x12C 0x38C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL                             0x12C 0x38C 0x5CC 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19                           0x12C 0x38C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x130 0x390 0x4F4 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI1_TX_DATA01               0x130 0x390 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT                              0x130 0x390 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA                              0x130 0x390 0x5D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK                      0x130 0x390 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20                            0x130 0x390 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x134 0x394 0x4F8 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02              0x134 0x394 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT                             0x134 0x394 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL                             0x134 0x394 0x5C4 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00            0x134 0x394 0x4C0 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21                           0x134 0x394 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x138 0x398 0x4FC 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03              0x138 0x398 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC                0x138 0x398 0x4D8 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC                0x138 0x398 0x510 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01            0x138 0x398 0x4C4 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22                           0x138 0x398 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX                              0x138 0x398 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x13C 0x39C 0x500 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04              0x13C 0x39C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC                0x13C 0x39C 0x4D8 0x2 0x1
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK                0x13C 0x39C 0x50C 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02            0x13C 0x39C 0x4C8 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23                           0x13C 0x39C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX                              0x13C 0x39C 0x54C 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x140 0x3A0 0x504 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05              0x140 0x3A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC                0x140 0x3A0 0x4D8 0x2 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00              0x140 0x3A0 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03            0x140 0x3A0 0x4CC 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24                           0x140 0x3A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX                              0x140 0x3A0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK                   0x144 0x3A4 0x4F0 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x144 0x3A4 0x4D4 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__PWM1_OUT                             0x144 0x3A4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA                             0x144 0x3A4 0x5C8 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25                           0x144 0x3A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX                              0x144 0x3A4 0x550 0x6 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI1_RX_SYNC                0x148 0x3A8 0x4D0 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN                 0x148 0x3A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00                           0x148 0x3A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI1_RX_BCLK                 0x14C 0x3AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_PDM_CLK                      0x14C 0x3AC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT                 0x14C 0x3AC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01                            0x14C 0x3AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00              0x150 0x3B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01              0x150 0x3B0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_PDM_BIT_STREAM00            0x150 0x3B0 0x4C0 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN                 0x150 0x3B0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02                           0x150 0x3B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01              0x154 0x3B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_PDM_BIT_STREAM01            0x154 0x3B4 0x4C4 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT                0x154 0x3B4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03                           0x154 0x3B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02              0x158 0x3B8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_PDM_BIT_STREAM02            0x158 0x3B8 0x4C8 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC                            0x158 0x3B8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04                           0x158 0x3B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03              0x15C 0x3BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_PDM_BIT_STREAM03            0x15C 0x3BC 0x4CC 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO                           0x15C 0x3BC 0x57C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05                           0x15C 0x3BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04              0x160 0x3C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK                0x160 0x3C0 0x524 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_RX_BCLK                0x160 0x3C0 0x518 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0                      0x160 0x3C0 0x580 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06                           0x160 0x3C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_DATA05              0x164 0x3C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_TX_DATA00              0x164 0x3C4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00              0x164 0x3C4 0x51C 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_SYNC                0x164 0x3C4 0x4D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1                      0x164 0x3C4 0x584 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07                           0x164 0x3C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI1_RX_DATA06              0x168 0x3C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_TX_SYNC                0x168 0x3C8 0x528 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_RX_SYNC                0x168 0x3C8 0x520 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2                      0x168 0x3C8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08                           0x168 0x3C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_RX_DATA07              0x16C 0x3CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI6_MCLK                   0x16C 0x3CC 0x514 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_SYNC                0x16C 0x3CC 0x4D8 0x2 0x3
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_DATA04              0x16C 0x3CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3                      0x16C 0x3CC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09                           0x16C 0x3CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI1_TX_SYNC                0x170 0x3D0 0x4D8 0x0 0x4
+#define MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL                   0x170 0x3D0 0x588 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXFS__GPIO4_IO10                           0x170 0x3D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI1_TX_BCLK                 0x174 0x3D4 0x4D4 0x0 0x1
+#define MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC                       0x174 0x3D4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11                            0x174 0x3D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI1_TX_DATA00              0x178 0x3D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0                      0x178 0x3D8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12                           0x178 0x3D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI1_TX_DATA01              0x17C 0x3DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1                      0x17C 0x3DC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13                           0x17C 0x3DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI1_TX_DATA02              0x180 0x3E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2                      0x180 0x3E0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14                           0x180 0x3E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI1_TX_DATA03              0x184 0x3E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3                      0x184 0x3E4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15                           0x184 0x3E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI1_TX_DATA04              0x188 0x3E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_RX_BCLK                0x188 0x3E8 0x518 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_TX_BCLK                0x188 0x3E8 0x524 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL                   0x188 0x3E8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16                           0x188 0x3E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI1_TX_DATA05              0x18C 0x3EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_RX_DATA00              0x18C 0x3EC 0x51C 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00              0x18C 0x3EC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC                      0x18C 0x3EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17                           0x18C 0x3EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI1_TX_DATA06              0x190 0x3F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_RX_SYNC                0x190 0x3F0 0x520 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC                0x190 0x3F0 0x528 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER                          0x190 0x3F0 0x58C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18                           0x190 0x3F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI1_TX_DATA07              0x194 0x3F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK                   0x194 0x3F4 0x514 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_PDM_CLK                     0x194 0x3F4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__ENET1_TX_ER                          0x194 0x3F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19                           0x194 0x3F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK                   0x198 0x3F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x198 0x3F8 0x4D4 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK                         0x198 0x3F8 0x578 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20                           0x198 0x3F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC                0x19C 0x3FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_SYNC                0x19C 0x3FC 0x510 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_DATA01              0x19C 0x3FC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x19C 0x3FC 0x4DC 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX                         0x19C 0x3FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX                         0x19C 0x3FC 0x5E8 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21                           0x19C 0x3FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_PDM_BIT_STREAM02            0x19C 0x3FC 0x4C8 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK                 0x1A0 0x400 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK                 0x1A0 0x400 0x50C 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXC__CAN1_TX                               0x1A0 0x400 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX                          0x1A0 0x400 0x5E8 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX                          0x1A0 0x400 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                            0x1A0 0x400 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_PDM_BIT_STREAM01             0x1A0 0x400 0x4C4 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00              0x1A4 0x404 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00              0x1A4 0x404 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT             0x1A4 0x404 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_TX_DATA01              0x1A4 0x404 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS                        0x1A4 0x404 0x5E4 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS                        0x1A4 0x404 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23                           0x1A4 0x404 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_PDM_BIT_STREAM03            0x1A4 0x404 0x4CC 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC                0x1A8 0x408 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01              0x1A8 0x408 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__ENET_QOS_1588_EVENT3_OUT             0x1A8 0x408 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1A8 0x408 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS                        0x1A8 0x408 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS                        0x1A8 0x408 0x5E4 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24                           0x1A8 0x408 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_PDM_BIT_STREAM02            0x1A8 0x408 0x4C8 0x6 0x6
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK                 0x1AC 0x40C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02               0x1AC 0x40C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX                               0x1AC 0x40C 0x54C 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25                            0x1AC 0x40C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_PDM_BIT_STREAM01             0x1AC 0x40C 0x4C4 0x6 0x6
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00              0x1B0 0x410 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03              0x1B0 0x410 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN              0x1B0 0x410 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX                              0x1B0 0x410 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_AUX_IN          0x1B0 0x410 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26                           0x1B0 0x410 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK                   0x1B4 0x414 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI5_MCLK                   0x1B4 0x414 0x4F0 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_IN              0x1B4 0x414 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX                              0x1B4 0x414 0x550 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_AUX_IN          0x1B4 0x414 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27                           0x1B4 0x414 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI3_MCLK                   0x1B4 0x414 0x4E0 0x6 0x1
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC                0x1B8 0x418 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x1B8 0x418 0x4DC 0x1 0x1
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x1B8 0x418 0x508 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01              0x1B8 0x418 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF1_IN                   0x1B8 0x418 0x544 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28                           0x1B8 0x418 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00            0x1B8 0x418 0x4C0 0x6 0x5
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK                 0x1BC 0x41C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02               0x1BC 0x41C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x1BC 0x41C 0x4F4 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPT1_CLK                              0x1BC 0x41C 0x59C 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS                         0x1BC 0x41C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DTE_RTS                         0x1BC 0x41C 0x5EC 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29                            0x1BC 0x41C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK                      0x1BC 0x41C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00               0x1C0 0x420 0x4E4 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI2_RX_DATA03               0x1C0 0x420 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00               0x1C0 0x420 0x4F8 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS                         0x1C0 0x420 0x5EC 0x4 0x3
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS                         0x1C0 0x420 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30                            0x1C0 0x420 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_PDM_BIT_STREAM01             0x1C0 0x420 0x4C4 0x6 0x7
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC                0x1C4 0x424 0x4EC 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1C4 0x424 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI5_RX_DATA01              0x1C4 0x424 0x4FC 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01              0x1C4 0x424 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX                         0x1C4 0x424 0x5F0 0x4 0x4
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX                         0x1C4 0x424 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31                           0x1C4 0x424 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_PDM_BIT_STREAM03            0x1C4 0x424 0x4CC 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK                 0x1C8 0x428 0x4E8 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02               0x1C8 0x428 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI5_RX_DATA02               0x1C8 0x428 0x500 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXC__GPT1_CAPTURE1                         0x1C8 0x428 0x594 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX                          0x1C8 0x428 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX                          0x1C8 0x428 0x5F0 0x4 0x5
+#define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00                            0x1C8 0x428 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_PDM_BIT_STREAM02             0x1C8 0x428 0x4C8 0x6 0x7
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00               0x1CC 0x42C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03               0x1CC 0x42C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI5_RX_DATA03               0x1CC 0x42C 0x504 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXD__GPT1_CAPTURE2                         0x1CC 0x42C 0x598 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF1_EXT_CLK               0x1CC 0x42C 0x548 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01                            0x1CC 0x42C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK                   0x1D0 0x430 0x4E0 0x0 0x2
+#define MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT                             0x1D0 0x430 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI5_MCLK                   0x1D0 0x430 0x4F0 0x2 0x3
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_OUT                  0x1D0 0x430 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02                           0x1D0 0x430 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_IN                   0x1D0 0x430 0x544 0x6 0x3
+#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF1_OUT                   0x1D4 0x434 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT                              0x1D4 0x434 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL                              0x1D4 0x434 0x5C4 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_TX__GPT1_COMPARE1                         0x1D4 0x434 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__CAN1_TX                               0x1D4 0x434 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03                            0x1D4 0x434 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF1_IN                    0x1D8 0x438 0x544 0x0 0x4
+#define MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT                              0x1D8 0x438 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA                              0x1D8 0x438 0x5C8 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPT1_COMPARE2                         0x1D8 0x438 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__CAN1_RX                               0x1D8 0x438 0x54C 0x4 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04                            0x1D8 0x438 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPT1_COMPARE3                    0x1DC 0x43C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05                       0x1DC 0x43C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF1_EXT_CLK          0x1DC 0x43C 0x548 0x0 0x1
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT                         0x1DC 0x43C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK                        0x1E0 0x440 0x558 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX                       0x1E0 0x440 0x5F8 0x1 0x4
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DTE_TX                       0x1E0 0x440 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL                           0x1E0 0x440 0x5A4 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__AUDIOMIX_SAI7_RX_SYNC              0x1E0 0x440 0x538 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__GPIO5_IO06                         0x1E0 0x440 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI                        0x1E4 0x444 0x560 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX                       0x1E4 0x444 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DTE_RX                       0x1E4 0x444 0x5F8 0x1 0x5
+#define MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA                           0x1E4 0x444 0x5A8 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__AUDIOMIX_SAI7_RX_BCLK              0x1E4 0x444 0x530 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07                         0x1E4 0x444 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO                        0x1E8 0x448 0x55C 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS                      0x1E8 0x448 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DTE_RTS                      0x1E8 0x448 0x5F4 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI1_MISO__I2C2_SCL                           0x1E8 0x448 0x5AC 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__AUDIOMIX_SAI7_RX_DATA00            0x1E8 0x448 0x534 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08                         0x1E8 0x448 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0                          0x1EC 0x44C 0x564 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS                       0x1EC 0x44C 0x5F4 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DTE_CTS                       0x1EC 0x44C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__I2C2_SDA                            0x1EC 0x44C 0x5B0 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__AUDIOMIX_SAI7_TX_SYNC               0x1EC 0x44C 0x540 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09                          0x1EC 0x44C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK                        0x1F0 0x450 0x568 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX                       0x1F0 0x450 0x600 0x1 0x6
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DTE_TX                       0x1F0 0x450 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__I2C3_SCL                           0x1F0 0x450 0x5B4 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_SCLK__AUDIOMIX_SAI7_TX_BCLK              0x1F0 0x450 0x53C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10                         0x1F0 0x450 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI                        0x1F4 0x454 0x570 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX                       0x1F4 0x454 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DTE_RX                       0x1F4 0x454 0x600 0x1 0x7
+#define MX8MP_IOMUXC_ECSPI2_MOSI__I2C3_SDA                           0x1F4 0x454 0x5B8 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_MOSI__AUDIOMIX_SAI7_TX_DATA00            0x1F4 0x454 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11                         0x1F4 0x454 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12                         0x1F8 0x458 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO                        0x1F8 0x458 0x56C 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS                      0x1F8 0x458 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DTE_RTS                      0x1F8 0x458 0x5FC 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL                           0x1F8 0x458 0x5BC 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_MISO__AUDIOMIX_SAI7_MCLK                 0x1F8 0x458 0x52C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__CCM_CLKO1                          0x1F8 0x458 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0                          0x1FC 0x45C 0x574 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS                       0x1FC 0x45C 0x5FC 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DTE_CTS                       0x1FC 0x45C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA                            0x1FC 0x45C 0x5C0 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_SS0__CCM_CLKO2                           0x1FC 0x45C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13                          0x1FC 0x45C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL                              0x200 0x460 0x5A4 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SCL__ENET_QOS_MDC                          0x200 0x460 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK                           0x200 0x460 0x558 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14                            0x200 0x460 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA                              0x204 0x464 0x5A8 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ENET_QOS_MDIO                         0x204 0x464 0x590 0x1 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI                           0x204 0x464 0x560 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15                            0x204 0x464 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL                              0x208 0x468 0x5AC 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_IN               0x208 0x468 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__USDHC3_CD_B                           0x208 0x468 0x608 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO                           0x208 0x468 0x55C 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_AUX_IN           0x208 0x468 0x000 0x4 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16                            0x208 0x468 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA                              0x20C 0x46C 0x5B0 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SDA__ENET_QOS_1588_EVENT1_OUT              0x20C 0x46C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__USDHC3_WP                             0x20C 0x46C 0x634 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SDA__ECSPI1_SS0                            0x20C 0x46C 0x564 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17                            0x20C 0x46C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                              0x210 0x470 0x5B4 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SCL__PWM4_OUT                              0x210 0x470 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK                              0x210 0x470 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__ECSPI2_SCLK                           0x210 0x470 0x568 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18                            0x210 0x470 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                              0x214 0x474 0x5B8 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT                              0x214 0x474 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK                              0x214 0x474 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__ECSPI2_MOSI                           0x214 0x474 0x570 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19                            0x214 0x474 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL                              0x218 0x478 0x5BC 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SCL__PWM2_OUT                              0x218 0x478 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B                         0x218 0x478 0x5A0 0x2 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__ECSPI2_MISO                           0x218 0x478 0x56C 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20                            0x218 0x478 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA                              0x21C 0x47C 0x5C0 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT                              0x21C 0x47C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__ECSPI2_SS0                            0x21C 0x47C 0x574 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21                            0x21C 0x47C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX                         0x220 0x480 0x5E8 0x0 0x4
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DTE_TX                         0x220 0x480 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK                          0x220 0x480 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22                           0x220 0x480 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX                         0x224 0x484 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DTE_RX                         0x224 0x484 0x5E8 0x0 0x5
+#define MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI                          0x224 0x484 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23                           0x224 0x484 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                         0x228 0x488 0x5F0 0x0 0x6
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DTE_TX                         0x228 0x488 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO                          0x228 0x488 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPT1_COMPARE3                        0x228 0x488 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24                           0x228 0x488 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                         0x22C 0x48C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DTE_RX                         0x22C 0x48C 0x5F0 0x0 0x7
+#define MX8MP_IOMUXC_UART2_TXD__ECSPI3_SS0                           0x22C 0x48C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPT1_COMPARE2                        0x22C 0x48C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25                           0x22C 0x48C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX                         0x230 0x490 0x5F8 0x0 0x6
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DTE_TX                         0x230 0x490 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS                        0x230 0x490 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS                        0x230 0x490 0x5E4 0x1 0x4
+#define MX8MP_IOMUXC_UART3_RXD__USDHC3_RESET_B                       0x230 0x490 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPT1_CAPTURE2                        0x230 0x490 0x598 0x3 0x1
+#define MX8MP_IOMUXC_UART3_RXD__CAN2_TX                              0x230 0x490 0x000 0x4 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26                           0x230 0x490 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX                         0x234 0x494 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DTE_RX                         0x234 0x494 0x5F8 0x0 0x7
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS                        0x234 0x494 0x5E4 0x1 0x5
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DTE_CTS                        0x234 0x494 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_TXD__USDHC3_VSELECT                       0x234 0x494 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_TXD__GPT1_CLK                             0x234 0x494 0x59C 0x3 0x1
+#define MX8MP_IOMUXC_UART3_TXD__CAN2_RX                              0x234 0x494 0x550 0x4 0x2
+#define MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27                           0x234 0x494 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX                         0x238 0x498 0x600 0x0 0x8
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DTE_TX                         0x238 0x498 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS                        0x238 0x498 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DTE_RTS                        0x238 0x498 0x5EC 0x1 0x4
+#define MX8MP_IOMUXC_UART4_RXD__PCIE_CLKREQ_B                        0x238 0x498 0x5A0 0x2 0x1
+#define MX8MP_IOMUXC_UART4_RXD__GPT1_COMPARE1                        0x238 0x498 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART4_RXD__I2C6_SCL                             0x238 0x498 0x5CC 0x4 0x2
+#define MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28                           0x238 0x498 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX                         0x23C 0x49C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DTE_RX                         0x23C 0x49C 0x600 0x0 0x9
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS                        0x23C 0x49C 0x5EC 0x1 0x5
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DTE_CTS                        0x23C 0x49C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_TXD__GPT1_CAPTURE1                        0x23C 0x49C 0x594 0x3 0x1
+#define MX8MP_IOMUXC_UART4_TXD__I2C6_SDA                             0x23C 0x49C 0x5D0 0x4 0x2
+#define MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29                           0x23C 0x49C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL                  0x240 0x4A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL                          0x240 0x4A0 0x5C4 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__CAN1_TX                           0x240 0x4A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26                        0x240 0x4A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA                  0x244 0x4A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA                          0x244 0x4A4 0x5C8 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__CAN1_RX                           0x244 0x4A4 0x54C 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27                        0x244 0x4A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC                      0x248 0x4A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL                              0x248 0x4A8 0x5CC 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_CEC__CAN2_TX                               0x248 0x4A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28                            0x248 0x4A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD                      0x24C 0x4AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_HDMI_HPD_O                   0x24C 0x4AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__I2C6_SDA                              0x24C 0x4AC 0x5D0 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__CAN2_RX                               0x24C 0x4AC 0x550 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__GPIO3_IO29                            0x24C 0x4AC 0x000 0x5 0x0
+
+#endif /* __DTS_IMX8MP_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
new file mode 100644
index 0000000000..ea44d60534
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+
+	panel-timing {
+		clock-frequency = <74250000>;
+		hactive = <1280>;
+		vactive = <800>;
+		hfront-porch = <64>;
+		hback-porch = <5>;
+		hsync-len = <1>;
+		vfront-porch = <40>;
+		vback-porch = <2>;
+		vsync-len = <1>;
+		de-active = <1>;
+	};
+
+	port {
+		panel_in_lvds0: endpoint {
+			remote-endpoint = <&ldb_lvds_ch0>;
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
new file mode 100644
index 0000000000..4240e20d38
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -0,0 +1,960 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021-2022 TQ-Systems GmbH
+ * Author: Alexander Stein <alexander.stein@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-tqma8mpql.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+		spi0 = &flexspi;
+		spi1 = &ecspi1;
+		spi2 = &ecspi2;
+		spi3 = &ecspi3;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_vcc_12v0>;
+		enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobutton>;
+		autorepeat;
+
+		switch-1 {
+			label = "S12";
+			linux,code = <BTN_0>;
+			gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-2 {
+			label = "S13";
+			linux,code = <BTN_1>;
+			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvdsdisplay>;
+		power-supply = <&reg_vcc_3v3>;
+		enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight_lvds>;
+		status = "disabled";
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpwmfan>;
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_12v0>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_vcc_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg12v0>;
+		regulator-name = "VCC_12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ocram: ocram@900000 {
+			no-map;
+			reg = <0 0x900000 0 0x70000>;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x38000000>;
+			alloc-ranges = <0 0x40000000 0 0xB0000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tq-tlv320aic32x";
+		audio-cpu = <&sai3>;
+		audio-codec = <&tlv320aic3x04>;
+	};
+
+	thermal-zones {
+		soc-thermal {
+			trips {
+				soc_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				soc_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				soc_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&soc_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&soc_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&soc_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		reg = <0>;
+		compatible = "microchip,mcp3202";
+		/* 100 ksps * 18 */
+		spi-max-frequency = <1800000>;
+		vref-supply = <&reg_vcc_3v3>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_vcc_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_vcc_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+
+	gpio-line-names = "GPO1", "GPO0", "", "GPO3",
+			  "", "", "GPO2", "GPI0",
+			  "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#",
+			  "OTG_PWR", "", "GPI2", "GPI3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hoggpio2>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "VCC12V_EN", "PERST#",
+			  "", "", "CLKREQ#", "PEWAKE#",
+			  "USDHC2_CD", "", "", "",
+			  "", "", "", "V_SD3V3_EN",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	perst-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-high;
+		line-name = "PERST#";
+	};
+
+	clkreq-hog {
+		gpio-hog;
+		gpios = <10 0>;
+		input;
+		line-name = "CLKREQ#";
+	};
+
+	pewake-hog {
+		gpio-hog;
+		gpios = <11 0>;
+		input;
+		line-name = "PEWAKE#";
+	};
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "LVDS0_RESET#", "",
+			  "", "", "", "LVDS0_BLT_EN",
+			  "LVDS0_PWR_EN", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+
+	gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "DP_IRQ", "DSI_EN",
+			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "",
+			  "", "", "", "FAN_PWR",
+			  "RTC_EVENT#", "CODEC_RST#", "", "";
+
+	pcie-refclkreq-hog {
+		gpio-hog;
+		gpios = <22 0>;
+		output-high;
+		line-name = "PCIE_REFCLK_OE#";
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "LED2",
+			  "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC",
+			  "CSI0_TRIGGER", "CSI0_ENABLE", "", "",
+			  "", "ECSPI2_SS0", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B",
+			  "", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tlv320aic3x04>;
+		reg = <0x18>;
+		clock-names = "mclk";
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		iov-supply = <&reg_vcc_3v3>;
+		ldoin-supply = <&reg_vcc_3v3>;
+	};
+
+	se97_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	at24c02_54: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# is connected on MBa8MPxL */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio4>;
+	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcie_phy {
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+		 <&clk IMX8MP_CLK_HSIO_AXI>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-rates = <10000000>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart4 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented, but not a full featured OTG */
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x14>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x150>,
+			   <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x150>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x150>,
+			   <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x150>;
+	};
+
+	/* only on X57, primary used as CSI0 control signals */
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x1c0>;
+	};
+
+	/* on X63 and optionally on X57, can also be used as CSI1 control signals */
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x1c0>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x1c0>,
+			   <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x1c0>,
+			   <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x1c0>,
+			   <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x1c0>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x40000044>,
+			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x40000044>,
+			   <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>,
+			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>,
+			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>,
+			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12>,
+			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12>,
+			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x14>;
+	};
+
+	pinctrl_eqos_event: eqosevtgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT		0x100>,
+			   <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN		0x1c0>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02				0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03				0x1c0>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x14>;
+	};
+
+	pinctrl_fec_event: fecevtgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN	0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT	0x1c0>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x1c0>;
+	};
+
+	pinctrl_fec_phyalt: fecphyaltgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x180>,
+			   <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x180>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26		0x10>,
+			   <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27		0x10>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x14>,
+			   <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x14>,
+			   <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x14>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x10>,
+			   <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x10>,
+			   <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x10>,
+			   <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x10>,
+			   <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x80>,
+			   <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x80>,
+			   <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x80>,
+			   <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x80>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x180>,
+			   <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x180>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000010>,
+			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000010>;
+	};
+
+	pinctrl_hoggpio2: hoggpio2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x140>,
+			   <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10	0x140>,
+			   <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x140>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001e2>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x400001e2>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03		0x400001e2>;
+	};
+
+	pinctrl_lvdsdisplay: lvdsdisplaygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x10>; /* Power enable */
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x80>;
+	};
+
+	/* LVDS Backlight */
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x14>;
+	};
+
+	/* FAN */
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>; /* FAN RPM */
+	};
+
+	pinctrl_reg12v0: reg12v0grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x140>; /* VCC12V enable */
+	};
+
+	pinctrl_regpwmfan: regpwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x80>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0x94
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0x94
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0x94
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0x94
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0x94
+		>;
+	};
+
+	pinctrl_tlv320aic3x04: tlv320aic3x04grp {
+		fsl,pins = <
+			/* CODEC RST# */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0x180
+		>;
+	};
+
+	/* X61 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x140>,
+			   <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX		0x140>;
+	};
+
+	/* X61 */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX	0x140>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140>,
+			   <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140>;
+	};
+
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x1c0>,
+			   <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR	0x1c0>;
+	};
+
+	pinctrl_usbcon0: usb0congrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c0>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x10>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
+			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
new file mode 100644
index 0000000000..ebc29a950b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021-2022 TQ-Systems GmbH
+ * Author: Alexander Stein <alexander.stein@tq-group.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MPlus TQMa8MPxL";
+	compatible = "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	/* identical to buck4_reg, but should never change */
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pmic: pmic@25 {
+		reg = <0x25>;
+		compatible = "nxp,pca9450c";
+
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V85_SOC: 0.85 .. 0.95 */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VCC3V3 -> VMMC, ... must not be changed */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 -> RAM, ... must not be changed */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_ANA */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* unused */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* VCC SD IO - switched using SD2 VSELECT */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+
+	at24c02: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		read-only;
+		reg = <0x53>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	m24c64: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK	0x142>,
+			   <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82>,
+			   <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82>,
+			   <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82>,
+			   <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82>,
+			   <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001e2>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x1c0>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x10>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x84>,
+			   <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x84>,
+			   <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x84>,
+			   <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x1c4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
new file mode 100644
index 0000000000..560c68e4da
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		ethernet0 = &eqos;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <0x0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@16 {
+				gw,mode = <4>;
+				reg = <0x16>;
+				label = "fan_tach";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_adc1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_adc2";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_1p0";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_1p8";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_2p5";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_soc";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_arm";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+
+		fan-controller@0 {
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+
+	pmic@69 {
+		compatible = "mps,mp5416";
+		reg = <0x69>;
+
+		regulators {
+			/* vdd_soc */
+			buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vdd_dram */
+			buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vdd_arm */
+			buck3_reg: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vdd_1p8 */
+			buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT2: nvcc_snvs_1p8 */
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT3: vdd_1p0 */
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT4: vdd_2p5 */
+			ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT5: vdd_3p3 */
+			ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+/* off-board header */
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* off-board */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+		>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x140 /* RST# */
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x150 /* IRQ# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x150 /* IRQ# */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c2
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts
new file mode 100644
index 0000000000..53120fc9cd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw71xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW71xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw71xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
new file mode 100644
index 0000000000..c531564c7e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "", "", "dio0",
+		"", "", "pci_usb_sel", "",
+		"", "", "", "",
+		"", "", "", "",
+		"dio3", "", "dio2", "",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* USB1 Type-C front panel */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* USB2 - MiniPCIe socket */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x40000106 /* PCIE_USBSEL */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26	0x40000146 /* DIO2 */
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24	0x40000146 /* DIO3 */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCIE_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140 /* USB1_FLT# */
+		>;
+	};
+
+	pinctrl_usbcon1: usbcon1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140 /* USB1_ID */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts
new file mode 100644
index 0000000000..255e36f66b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw72xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW72xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw72xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
new file mode 100644
index 0000000000..f3bab22d5e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-name = "usb1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VDD_3V3_SD";
+		enable-active-high;
+		gpio = <&gpio2 19 0>; /* SD2_RESET */
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		startup-delay-us = <100>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "", "", "dio0",
+		"", "", "pci_usb_sel", "",
+		"", "", "", "",
+		"", "", "rs485_en", "rs485_term",
+		"", "", "", "rs485_half",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - OTG */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x40000106 /* PCIE_USBSEL */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x40000106 /* RS485_HALF */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x40000106 /* RS485_EN */
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23	0x40000106 /* RS485_TERM */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCIE_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x146 /* USB1_EN */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140 /* USB1_FLT# */
+		>;
+	};
+
+	pinctrl_usbcon1: usbcon1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140 /* USB1_ID */
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x146 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts
new file mode 100644
index 0000000000..000fd15e0c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw73xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW73xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw73xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
new file mode 100644
index 0000000000..68c62def4c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-name = "usb1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		regulator-name = "wl";
+		gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VDD_3V3_SD";
+		enable-active-high;
+		gpio = <&gpio2 19 0>; /* SD2_RESET */
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		startup-delay-us = <100>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "", "", "dio0",
+		"", "", "pci_usb_sel", "",
+		"", "", "", "",
+		"", "", "rs485_en", "rs485_term",
+		"", "", "", "rs485_half",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
+	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - OTG */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x40000106 /* PCIE_USBSEL */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x40000106 /* RS485_HALF */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x40000106 /* RS485_EN */
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23	0x40000106 /* RS485_TERM */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCIE_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ */
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16	0x146
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x146
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x146 /* USB1_EN */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140 /* USB1_FLT# */
+		>;
+	};
+
+	pinctrl_usbcon1: usbcon1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140 /* USB1_ID */
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x146 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08	0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso
new file mode 100644
index 0000000000..6a39f43435
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
new file mode 100644
index 0000000000..faa370a588
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -0,0 +1,1117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Gateworks Venice GW74xx i.MX8MP board";
+	compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		ethernet2 = &lan1;
+		ethernet3 = &lan2;
+		ethernet4 = &lan3;
+		ethernet5 = &lan4;
+		ethernet6 = &lan5;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-1 {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-2 {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-3 {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-4 {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		key-5 {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_usb2_vbus";
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can2>;
+		regulator-name = "can2_stby";
+		gpio = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wifi>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "tcg,tpm_tis-spi";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		reg = <0x0>;
+		spi-max-frequency = <36000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x0>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "dio0", "", "dio1", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "m2_pin20", "",
+		"", "", "", "", "", "pcie1_wdis#", "pcie3_wdis#", "",
+		"", "", "pcie2_wdis#", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "m2_rst", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "m2_off#", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "m2_wdis#", "", "", "", "", "",
+		"", "", "", "", "", "", "", "rs485_en";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"rs485_hd", "rs485_term", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@16 {
+				gw,mode = <4>;
+				reg = <0x16>;
+				label = "fan_tach";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_adc1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_adc2";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_arm";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p2";
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+
+		fan-controller@a {
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9897";
+		reg = <0x5f>;
+		pinctrl-0 = <&pinctrl_ksz>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan3: port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan4: port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan5: port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&fec>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1045000>;
+				regulator-max-microvolt = <1155000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* off-board header */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 17 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS / off-board header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* RS232 console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - Type C front panel */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09	0x40000040 /* DIO0 */
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x40000040 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x40000040 /* M2SKT_OFF# */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x40000150 /* M2SKT_WDIS# */
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40000040 /* M2SKT_PIN20 */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11	0x40000040 /* M2SKT_PIN22 */
+			MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13	0x40000150 /* PCIE1_WDIS# */
+			MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14	0x40000150 /* PCIE3_WDIS# */
+			MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18	0x40000150 /* PCIE2_WDIS# */
+			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x40000040 /* M2SKT_RST# */
+			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01	0x40000104 /* UART_TERM */
+			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31	0x40000104 /* UART_RS485 */
+			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00	0x40000104 /* UART_HALF */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x150
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30		0x140 /* RST# */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x150 /* IRQ# */
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x16
+			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN	0x140
+			MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT	0x140
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX		0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x150
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_ksz: kszgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x150 /* IRQ# */
+			MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x140 /* RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: ledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15	0x10
+			MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16	0x10
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17	0x106
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x140
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x140
+		>;
+	};
+
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x154
+		>;
+	};
+
+	pinctrl_reg_can2: regcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x154
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x140
+		>;
+	};
+
+	pinctrl_reg_wifi: regwifigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x110
+		>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x140
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140
+			MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22	0x140
+		>;
+	};
+
+	pinctrl_uart3_gpio: uart3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x110
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140
+		>;
+	};
+
+	pinctrl_usbcon1: usb1congrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts
new file mode 100644
index 0000000000..4a1bbbbe19
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw7905.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7905-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw7905-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+/* Disable SOM interfaces not used on baseboard */
+&eqos {
+	status = "disabled";
+};
+
+&usdhc1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi
new file mode 100644
index 0000000000..0d40cb0f05
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		compatible = "regulator-fixed";
+		regulator-name = "SD2_3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "gpioa", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "gpiod", "", "",
+		"gpiob", "gpioc", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "pci_usb_sel", "",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* USB1 - Type C front panel SINK port J14 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/* USB2 4-port USB3.0 HUB:
+ *  P1 - USBC connector (host only)
+ *  P2 - USB2 test connector
+ *  P3 - miniPCIe full card
+ *  P4 - miniPCIe half card
+ */
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x40000040 /* GPIOA */
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x40000040 /* GPIOD */
+			MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04	0x40000040 /* GPIOB */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x40000040 /* GPIOC */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26	0x40000106 /* PCI_USBSEL */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x106
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x6 /* USBHUB_RST# (ext p/u) */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
new file mode 100644
index 0000000000..7e9e4b13b5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mp-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_1p8v>;
+		CPVDD-supply = <&reg_1p8v>;
+		DBVDD-supply = <&reg_1p8v>;
+		DCVDD-supply = <&reg_1p8v>;
+		MICVDD-supply = <&reg_1p8v>;
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin I2S_1 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
new file mode 100644
index 0000000000..a509b2b7fa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_eth2phy: regulator-eth2phy {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
+		off-on-delay-us = <500000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_ETH";
+		startup-delay-us = <200000>;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mp-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
+&fec {
+	phy-supply = <&reg_eth2phy>;
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+&gpio_expander_21 {
+	status = "okay";
+	vcc-supply = <&reg_1p8v>;
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin I2S_1 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver */
+&uart1 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Limit frequency on dev board due to long traces and bad signal integrity */
+&usdhc2 {
+	max-frequency = <100000000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts
new file mode 100644
index 0000000000..68147b0c1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Dahlia Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-dahlia",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts
new file mode 100644
index 0000000000..879ff687cf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-dev",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts
new file mode 100644
index 0000000000..b28477df1e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Yavia Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-yavia",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
new file mode 100644
index 0000000000..91d597391b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+&gpio5 {
+	gpio-line-names = "SODIMM_42",
+			  "SODIMM_46",
+			  "SODIMM_187",
+			  "SODIMM_20",
+			  "SODIMM_22",
+			  "SODIMM_15",
+			  "SODIMM_196",
+			  "SODIMM_200",
+			  "SODIMM_198",
+			  "SODIMM_202",
+			  "SODIMM_164",
+			  "SODIMM_152",
+			  "SODIMM_116",
+			  "SODIMM_128",
+			  "",
+			  "",
+			  "SODIMM_55",
+			  "SODIMM_53",
+			  "SODIMM_95",
+			  "SODIMM_93",
+			  "SODIMM_14",
+			  "SODIMM_12",
+			  "SODIMM_129",
+			  "SODIMM_131",
+			  "SODIMM_137",
+			  "SODIMM_139",
+			  "SODIMM_147",
+			  "SODIMM_149",
+			  "SODIMM_151",
+			  "SODIMM_153";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
+		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
+		    <&pinctrl_hdmi_hog>;
+};
+
+/*
+ * Verdin UART_4
+ * Often used by the M7 and then should not be enabled here.
+ */
+&uart4 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts
new file mode 100644
index 0000000000..804567f6cc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Dahlia Board";
+	compatible = "toradex,verdin-imx8mp-wifi-dahlia",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts
new file mode 100644
index 0000000000..c1713c28cd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mp-wifi-dev",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts
new file mode 100644
index 0000000000..100bef1208
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Yavia Board";
+	compatible = "toradex,verdin-imx8mp-wifi-yavia",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
new file mode 100644
index 0000000000..ef94f9a57e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "PDn_AW-CM276NF";
+		startup-delay-us = <2000>;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_42",
+			  "SODIMM_46",
+			  "SODIMM_187",
+			  "SODIMM_20",
+			  "SODIMM_22",
+			  "SODIMM_15",
+			  "SODIMM_196",
+			  "SODIMM_200",
+			  "SODIMM_198",
+			  "SODIMM_202",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_55",
+			  "SODIMM_53",
+			  "SODIMM_95",
+			  "SODIMM_93",
+			  "SODIMM_14",
+			  "SODIMM_12",
+			  "SODIMM_129",
+			  "SODIMM_131",
+			  "SODIMM_137",
+			  "SODIMM_139",
+			  "SODIMM_147",
+			  "SODIMM_149",
+			  "SODIMM_151",
+			  "SODIMM_153";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
+		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>,
+		    <&pinctrl_hdmi_hog>;
+};
+
+/* On-module Bluetooth */
+&uart4 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bt_uart>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "mrvl,88w8997";
+		max-speed = <921600>;
+	};
+};
+
+/* On-module Wi-Fi */
+&usdhc1 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_wifi_ctrl>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_wifi_ctrl>;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
new file mode 100644
index 0000000000..db1722f0d8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	/* Carrier Board Supply +V1.8 */
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	/* Carrier Board Supply +V3.3 */
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_yavia>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Yavia board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&hwmon_temp {
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds_yavia: ledsyaviagrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x106	/* SODIMM 52 */
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x106	/* SODIMM 54 */
+			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x106	/* SODIMM 56 */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x106	/* SODIMM 58 */
+			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x106	/* SODIMM 60 */
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x106	/* SODIMM 62 */
+		>;
+	};
+
+	pinctrl_gpios_ext_yavia: gpiosextyaviagrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02	0x106	/* SODIMM 64 */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x106	/* SODIMM 66 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
new file mode 100644
index 0000000000..e9e4fcb562
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -0,0 +1,1438 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		/* Ethernet aliases to ensure correct MAC addresses */
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		/* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
+		power-supply = <&reg_3p3v>;
+		/* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
+		pwms = <&pwm3 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	backlight_mezzanine: backlight-mezzanine {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		/* Verdin GPIO 4 (SODIMM 212) */
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		/* Verdin PWM_2 (SODIMM 16) */
+		pwms = <&pwm2 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	/* Carrier Board Supplies */
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "+V5_SW";
+	};
+
+	/* Non PMIC On-module Supplies */
+	reg_module_eth1phy: regulator-module-eth1phy {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
+		off-on-delay-us = <500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "On-module +V3.3_ETH";
+		startup-delay-us = <200000>;
+		vin-supply = <&reg_vdd_3v3>;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_1_EN (SODIMM 155) */
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_1_EN";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_2_EN (SODIMM 185) */
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb2_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_2_EN";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin SD_1_PWR_EN (SODIMM 76) */
+		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SD";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Use the kernel configuration settings instead */
+		/delete-node/ linux,cma;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_module_eth1phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			eee-broken-100tx;
+			eee-broken-1000t;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+/* Verdin ETH_2_RGMII */
+&fec {
+	fsl,magic-packet;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_206",
+			  "SODIMM_208",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_210",
+			  "SODIMM_212",
+			  "SODIMM_216",
+			  "SODIMM_218",
+			  "",
+			  "",
+			  "SODIMM_16",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_185",
+			  "SODIMM_91";
+};
+
+&gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_143",
+			  "SODIMM_141",
+			  "",
+			  "",
+			  "SODIMM_161",
+			  "",
+			  "SODIMM_84",
+			  "SODIMM_78",
+			  "SODIMM_74",
+			  "SODIMM_80",
+			  "SODIMM_82",
+			  "SODIMM_70",
+			  "SODIMM_72";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_52",
+			  "SODIMM_54",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_56",
+			  "SODIMM_58",
+			  "SODIMM_60",
+			  "SODIMM_62",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_66",
+			  "",
+			  "SODIMM_64",
+			  "",
+			  "",
+			  "SODIMM_34",
+			  "SODIMM_19",
+			  "",
+			  "SODIMM_32",
+			  "",
+			  "",
+			  "SODIMM_30",
+			  "SODIMM_59",
+			  "SODIMM_57",
+			  "SODIMM_63",
+			  "SODIMM_61";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_252",
+			  "SODIMM_222",
+			  "SODIMM_36",
+			  "SODIMM_220",
+			  "SODIMM_193",
+			  "SODIMM_191",
+			  "SODIMM_201",
+			  "SODIMM_203",
+			  "SODIMM_205",
+			  "SODIMM_207",
+			  "SODIMM_199",
+			  "SODIMM_197",
+			  "SODIMM_221",
+			  "SODIMM_219",
+			  "SODIMM_217",
+			  "SODIMM_215",
+			  "SODIMM_211",
+			  "SODIMM_213",
+			  "SODIMM_189",
+			  "SODIMM_244",
+			  "SODIMM_38",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_135",
+			  "SODIMM_133",
+			  "SODIMM_17",
+			  "SODIMM_24",
+			  "SODIMM_26",
+			  "SODIMM_21",
+			  "SODIMM_256",
+			  "SODIMM_48",
+			  "SODIMM_44";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
+};
+
+/* On-module I2C */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		interrupt-parent = <&gpio1>;
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x25>;
+
+		/*
+		 * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the
+		 * I2C level shifter for the TLA2024 ADC behind this PMIC.
+		 */
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "On-module +VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "On-module +VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "On-module +V3.3 (BUCK4)";
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "PWR_1V8_MOCI (BUCK5)";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "On-module +VDD_DDR (BUCK6)";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "On-module +V1.8_SNVS (LDO1)";
+			};
+
+			LDO2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "On-module +V0.8_SNVS (LDO2)";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V1.8A (LDO3)";
+			};
+
+			LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "On-module +V3.3_ADC (LDO4)";
+			};
+
+			LDO5 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
+			};
+		};
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	/* On-module temperature sensor */
+	hwmon_temp_module: sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+		vs-supply = <&reg_vdd_1v8>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Verdin I2C_1 (ADC_4 - ADC_3) */
+		channel@0 {
+			reg = <0>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_4 - ADC_1) */
+		channel@1 {
+			reg = <1>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_3 - ADC_1) */
+		channel@2 {
+			reg = <2>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_2 - ADC_1) */
+		channel@3 {
+			reg = <3>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_4 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_3 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_1 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	/* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */
+	clock-frequency = <10000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	atmel_mxt_ts_mezzanine: touch-mezzanine@4a {
+		compatible = "atmel,maxtouch";
+		/* Verdin GPIO_3 (SODIMM 210) */
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x4a>;
+		/* Verdin GPIO_2 (SODIMM 208) */
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+};
+
+/* TODO: Verdin I2C_3_HDMI */
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	gpio_expander_21: gpio-expander@21 {
+		compatible = "nxp,pcal6416";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x21>;
+		vcc-supply = <&reg_3p3v>;
+		status = "disabled";
+	};
+
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
+		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
+		reg = <0x2c>;
+		status = "disabled";
+	};
+
+	/* Current measurement into module VCC */
+	hwmon: hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+		status = "disabled";
+	};
+
+	hdmi_lontium_lt8912: hdmi@48 {
+		compatible = "lontium,lt8912b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>;
+		reg = <0x48>;
+		/* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	atmel_mxt_ts: touch@4a {
+		compatible = "atmel,maxtouch";
+		/*
+		 * Verdin GPIO_9_DSI
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
+		 */
+		interrupt-parent = <&gpio4>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
+		reg = <0x4a>;
+		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	/* Temperature sensor on carrier board */
+	hwmon_temp: sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+		status = "disabled";
+	};
+
+	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
+	eeprom_display_adapter: eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+		status = "disabled";
+	};
+
+	/* EEPROM on carrier board */
+	eeprom_carrier_board: eeprom@57 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x57>;
+		status = "disabled";
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	/* PCIE_1_RESET# (SODIMM 244) */
+	reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_1>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_2>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_3>;
+	#pwm-cells = <3>;
+};
+
+/* TODO: Verdin I2S_1 */
+
+/* TODO: Verdin I2S_2 */
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+/* Verdin UART_4, used for Bluetooth on Wi-Fi/Bluetooth SKUs */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	fsl,disable-port-power-control;
+	fsl,over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_1_oc_n>;
+};
+
+&usb_dwc3_0 {
+	/* dual role only, not full featured OTG */
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	maximum-speed = "high-speed";
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+	};
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+};
+
+/* On-module eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	status = "okay";
+};
+
+&wdog1 {
+	fsl,ext-reset-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bt_uart: btuartgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS	0x1c4>,
+			<MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX		0x1c4>,
+			<MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX		0x1c4>,
+			<MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS		0x1c4>;
+	};
+
+	pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0x1c4>;	/* SODIMM 256 */
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x1c4>,	/* SODIMM 198 */
+			<MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x4>,	/* SODIMM 200 */
+			<MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x4>,	/* SODIMM 196 */
+			<MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x1c4>;	/* SODIMM 202 */
+	};
+
+	/* Connection On Board PHY */
+	pinctrl_eqos: eqosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3>,
+			<MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3>,
+			<MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91>,
+			<MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91>,
+			<MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91>,
+			<MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91>,
+			<MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91>,
+			<MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x91>,
+			<MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f>,
+			<MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f>,
+			<MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f>,
+			<MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f>,
+			<MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x1f>,
+			<MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f>;
+	};
+
+	/* ETH_INT# shared with TPM_INT# (usually N/A) */
+	pinctrl_eth_tpm_int: ethtpmintgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c4>;
+	};
+
+	/* Connection Carrier Board PHY ETH_2 */
+	pinctrl_fec: fecgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3>,	/* SODIMM 193 */
+			<MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3>,	/* SODIMM 191 */
+			<MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x91>,	/* SODIMM 201 */
+			<MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x91>,	/* SODIMM 203 */
+			<MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x91>,	/* SODIMM 205 */
+			<MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x91>,	/* SODIMM 207 */
+			<MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91>,	/* SODIMM 197 */
+			<MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91>,	/* SODIMM 199 */
+			<MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x1f>,	/* SODIMM 221 */
+			<MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x1f>,	/* SODIMM 219 */
+			<MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x1f>,	/* SODIMM 217 */
+			<MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x1f>,	/* SODIMM 215 */
+			<MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f>,	/* SODIMM 211 */
+			<MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x1f>,	/* SODIMM 213 */
+			<MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x1c4>;	/* SODIMM 189 */
+	};
+
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3>,	/* SODIMM 193 */
+			<MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3>,	/* SODIMM 191 */
+			<MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x91>,	/* SODIMM 201 */
+			<MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x91>,	/* SODIMM 203 */
+			<MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x91>,	/* SODIMM 205 */
+			<MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x91>,	/* SODIMM 207 */
+			<MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91>,	/* SODIMM 197 */
+			<MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91>,	/* SODIMM 199 */
+			<MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12		0x1f>,	/* SODIMM 221 */
+			<MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13		0x1f>,	/* SODIMM 219 */
+			<MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14		0x1f>,	/* SODIMM 217 */
+			<MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15		0x1f>,	/* SODIMM 215 */
+			<MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16		0x1f>,	/* SODIMM 211 */
+			<MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17		0x1f>,	/* SODIMM 213 */
+			<MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x184>;	/* SODIMM 189 */
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154>,	/* SODIMM 22 */
+			<MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154>;	/* SODIMM 20 */
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX		0x154>,	/* SODIMM 26 */
+			<MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX		0x154>;	/* SODIMM 24 */
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2>,	/* SODIMM 52 */
+			<MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82>,	/* SODIMM 54 */
+			<MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS		0x82>,	/* SODIMM 66 */
+			<MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82>,	/* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82>,	/* SODIMM 58 */
+			<MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82>,	/* SODIMM 60 */
+			<MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82>,	/* SODIMM 62 */
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x82>;	/* SODIMM 64 */
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x184>;	/* SODIMM 206 */
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x1c4>;	/* SODIMM 208 */
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x184>;	/* SODIMM 210 */
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x184>;	/* SODIMM 212 */
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x184>;	/* SODIMM 216 */
+	};
+
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x184>;	/* SODIMM 218 */
+	};
+
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x184>;	/* SODIMM 220 */
+	};
+
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x184>;	/* SODIMM 222 */
+	};
+
+	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
+	pinctrl_gpio_9_dsi: gpio9dsigrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x1c4>;	/* SODIMM 17 */
+	};
+
+	/* Verdin GPIO_10_DSI */
+	pinctrl_gpio_10_dsi: gpio10dsigrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x1c4>;	/* SODIMM 21 */
+	};
+
+	/* Non-wifi MSP usage only */
+	pinctrl_gpio_hog1: gpiohog1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12		0x1c4>,	/* SODIMM 116 */
+			<MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11		0x1c4>,	/* SODIMM 152 */
+			<MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10		0x1c4>,	/* SODIMM 164 */
+			<MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x1c4>;	/* SODIMM 128 */
+	};
+
+	/* USB_2_OC# */
+	pinctrl_gpio_hog2: gpiohog2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02		0x1c4>;	/* SODIMM 187 */
+	};
+
+	pinctrl_gpio_hog3: gpiohog3grp {
+		fsl,pins =
+			/* CSI_1_MCLK */
+			<MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x1c4>;	/* SODIMM 91 */
+	};
+
+	/* Wifi usage only */
+	pinctrl_gpio_hog4: gpiohog4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28		0x1c4>,	/* SODIMM 151 */
+			<MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29		0x1c4>;	/* SODIMM 153 */
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x1c4>;	/* SODIMM 252 */
+	};
+
+	pinctrl_hdmi_hog: hdmihoggrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000019>,	/* SODIMM 63 */
+			<MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3>,	/* SODIMM 59 */
+			<MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3>,	/* SODIMM 57 */
+			<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019>;	/* SODIMM 61 */
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c6>,	/* PMIC_I2C_SCL */
+			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c6>;	/* PMIC_I2C_SDA */
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001c6>,	/* PMIC_I2C_SCL */
+			<MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001c6>;	/* PMIC_I2C_SDA */
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c6>,	/* SODIMM 55 */
+			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c6>;	/* SODIMM 53 */
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001c6>,	/* SODIMM 55 */
+			<MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001c6>;	/* SODIMM 53 */
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c6>,	/* SODIMM 95 */
+			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c6>;	/* SODIMM 93 */
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x400001c6>,	/* SODIMM 95 */
+			<MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x400001c6>;	/* SODIMM 93 */
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c6>,	/* SODIMM 14 */
+			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c6>;	/* SODIMM 12 */
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x400001c6>,	/* SODIMM 14 */
+			<MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x400001c6>;	/* SODIMM 12 */
+	};
+
+	/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
+	pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00		0x184>;	/* SODIMM 42 */
+	};
+
+	/* Verdin I2S_2_D_OUT shared with SAI3 */
+	pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01		0x184>;	/* SODIMM 46 */
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x4>,	/* SODIMM 244 */
+			<MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x1c4>;	/* PMIC_EN_PCIe_CLK, unused */
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x1c4>;	/* PMIC_INT# */
+	};
+
+	pinctrl_pwm_1: pwm1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x6>;	/* SODIMM 15 */
+	};
+
+	pinctrl_pwm_2: pwm2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT		0x6>;	/* SODIMM 16 */
+	};
+
+	/* Verdin PWM_3_DSI shared with GPIO3_IO20 */
+	pinctrl_pwm_3: pwm3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT		0x6>;	/* SODIMM 19 */
+	};
+
+	/* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM3_OUT */
+	pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsi1hpdgpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x184>;	/* SODIMM 19 */
+	};
+
+	pinctrl_reg_eth: regethgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x184>;	/* PMIC_EN_ETH */
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK		0x96>,	/* SODIMM 38 */
+			<MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0x1d6>,	/* SODIMM 36 */
+			<MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK		0x1d6>,	/* SODIMM 30 */
+			<MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC		0x1d6>,	/* SODIMM 32 */
+			<MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0x96>;	/* SODIMM 34 */
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0x1d6>,	/* SODIMM 48 */
+			<MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0x1d6>,	/* SODIMM 42 */
+			<MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0x96>,	/* SODIMM 46 */
+			<MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0x1d6>;	/* SODIMM 44 */
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x1c4>,	/* SODIMM 135 */
+			<MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS		0x1c4>,	/* SODIMM 133 */
+			<MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x1c4>,	/* SODIMM 129 */
+			<MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x1c4>;	/* SODIMM 131 */
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS		0x1c4>,	/* SODIMM 143 */
+			<MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS		0x1c4>,	/* SODIMM 141 */
+			<MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x1c4>,	/* SODIMM 137 */
+			<MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x1c4>; /* SODIMM 139 */
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x1c4>,	/* SODIMM 147 */
+			<MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x1c4>;	/* SODIMM 149 */
+	};
+
+	/* Non-wifi usage only */
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x1c4>,	/* SODIMM 151 */
+			<MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x1c4>;	/* SODIMM 153 */
+	};
+
+	pinctrl_usb1_vbus: usb1vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x106>;	/* SODIMM 155 */
+	};
+
+	/* USB_1_ID */
+	pinctrl_usb_1_id: usb1idgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>;	/* SODIMM 161 */
+	};
+
+	/* USB_1_OC# */
+	pinctrl_usb_1_oc_n: usb1ocngrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c4>;	/* SODIMM 157 */
+	};
+
+	pinctrl_usb2_vbus: usb2vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x106>;	/* SODIMM 185 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190>,
+			<MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0>,
+			<MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194>,
+			<MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4>,
+			<MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196>,
+			<MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6>,
+			<MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4>;	/* SODIMM 84 */
+	};
+
+	pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x0>;	/* SODIMM 84 */
+	};
+
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x4>;	/* SODIMM 76 */
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0x4>,	/* PMIC_USDHC_VSELECT */
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>,	/* SODIMM 78 */
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>,	/* SODIMM 74 */
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0>,	/* SODIMM 80 */
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0>,	/* SODIMM 82 */
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0>,	/* SODIMM 70 */
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0>;	/* SODIMM 72 */
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0x4>,
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0x4>,
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6>;
+	};
+
+	/* Avoid backfeeding with removed card power */
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0x0>,
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x100>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x100>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x100>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x100>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x100>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x100>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B	0x1d1>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0>,
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B	0x1d1>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4>,
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B	0x1d1>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d2>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d2>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d2>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d2>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d2>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d2>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d2>,
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6>;	/* PMIC_WDI */
+	};
+
+	pinctrl_bluetooth_ctrl: bluetoothctrlgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x1c4>;	/* WIFI_WKUP_BT */
+	};
+
+	pinctrl_wifi_ctrl: wifictrlgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x1c4>;	/* WIFI_WKUP_WLAN */
+	};
+
+	pinctrl_wifi_i2s: wifii2sgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x1d6>,	/* WIFI_TX_SYNC */
+			<MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x96>,	/* WIFI_RX_DATA0 */
+			<MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x1d6>,	/* WIFI_TX_BCLK */
+			<MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x1d6>;	/* WIFI_TX_DATA0 */
+	};
+
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x184>;	/* PMIC_EN_WIFI */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
new file mode 100644
index 0000000000..4b50920ac2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -0,0 +1,2091 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/power/imx8mp-power.h>
+#include <dt-bindings/reset/imx8mp-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interconnect/fsl,imx8mp.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		i2c5 = &i2c6;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &flexspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x8a0>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0xa0>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x20>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 0>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		soc-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 1>;
+			trips {
+				soc_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc: soc@0 {
+		compatible = "fsl,imx8mp-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		nvmem-cells = <&imx8mp_uid>;
+		nvmem-cell-names = "soc_unique_id";
+
+		etm0: etm@28440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28440000 0x1000>;
+			cpu = <&A53_0>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@28540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28540000 0x1000>;
+			cpu = <&A53_1>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@28640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28640000 0x1000>;
+			cpu = <&A53_2>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@28740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28740000 0x1000>;
+			cpu = <&A53_3>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		funnel {
+			/*
+			 * non-configurable funnel don't show up on the AMBA
+			 * bus.  As such no need to add "arm,primecell".
+			 */
+			compatible = "arm,coresight-static-funnel";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ca_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm1_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ca_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm2_out_port>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					ca_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm3_out_port>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@28c03000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x28c03000 0x1000>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					hugo_funnel_in_port1: endpoint {
+					/* M7 input */
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					hugo_funnel_in_port2: endpoint {
+					/* DSP input */
+					};
+				};
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf@28c04000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c04000 0x1000>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr@28c06000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c06000 0x1000>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 35 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 26 144 4>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 82 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 114 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mp-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
+				#thermal-sensor-cells = <1>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			gpt1: timer@302d0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT1_ROOT>, <&clk IMX8MP_CLK_GPT1>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@302e0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT2_ROOT>, <&clk IMX8MP_CLK_GPT2>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt3: timer@302f0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT3_ROOT>, <&clk IMX8MP_CLK_GPT3>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mp-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: syscon@30340000 {
+				compatible = "fsl,imx8mp-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
+				/* For nvmem subnodes */
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x8 0x8> describes fuses 0x420 and
+				 * 0x430).
+				 */
+				imx8mp_uid: unique-id@8 { /* 0x420-0x430 */
+					reg = <0x8 0x8>;
+				};
+
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
+					reg = <0x10 4>;
+				};
+
+				eth_mac1: mac-address@90 { /* 0x640 */
+					reg = <0x90 6>;
+				};
+
+				eth_mac2: mac-address@96 { /* 0x658 */
+					reg = <0x96 6>;
+				};
+
+				tmu_calib: calib@264 { /* 0xd90-0xdc0 */
+					reg = <0x264 0x10>;
+				};
+			};
+
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop";
+				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx8mp-snvs-lpgpr",
+						     "fsl,imx7d-snvs-lpgpr";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mp-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+						  <&clk IMX8MP_CLK_A53_CORE>,
+						  <&clk IMX8MP_CLK_NOC>,
+						  <&clk IMX8MP_CLK_NOC_IO>,
+						  <&clk IMX8MP_CLK_GIC>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_ARM_PLL_OUT>,
+							 <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL2_500M>;
+				assigned-clock-rates = <0>, <0>,
+						       <1000000000>,
+						       <800000000>,
+						       <500000000>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mp-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mp-gpc";
+				reg = <0x303a0000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_mipi_phy1: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY1>;
+					};
+
+					pgc_pcie_phy: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>;
+					};
+
+					pgc_usb1_phy: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>;
+					};
+
+					pgc_usb2_phy: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
+					};
+
+					pgc_audio: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
+						clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+							 <&clk IMX8MP_CLK_AUDIO_AXI>;
+						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
+								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
+						assigned-clock-parents =  <&clk IMX8MP_SYS_PLL1_800M>,
+									  <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <400000000>,
+								       <600000000>;
+					};
+
+					pgc_gpu2d: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_GPU2D>;
+						clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>;
+						power-domains = <&pgc_gpumix>;
+					};
+
+					pgc_gpumix: power-domain@7 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MP_CLK_GPU_ROOT>,
+							 <&clk IMX8MP_CLK_GPU_AHB>;
+						assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>,
+								  <&clk IMX8MP_CLK_GPU_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>, <400000000>;
+					};
+
+					pgc_gpu3d: power-domain@9 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_GPU3D>;
+						clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>,
+							 <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
+						power-domains = <&pgc_gpumix>;
+					};
+
+					pgc_mediamix: power-domain@10 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX>;
+						clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+							 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+					};
+
+					pgc_mipi_phy2: power-domain@16 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
+					};
+
+					pgc_hsiomix: power-domain@17 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+							 <&clk IMX8MP_CLK_HSIO_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+						assigned-clock-rates = <500000000>;
+					};
+
+					pgc_ispdwp: power-domain@18 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
+						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
+					};
+
+					pgc_vpumix: power-domain@19 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+					};
+
+					pgc_vpu_g1: power-domain@20 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
+						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+					};
+
+					pgc_vpu_g2: power-domain@21 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
+						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+					};
+
+					pgc_vpu_vc8000e: power-domain@22 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
+						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+					};
+
+					pgc_mlmix: power-domain@24 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM1_ROOT>,
+					 <&clk IMX8MP_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM2_ROOT>,
+					 <&clk IMX8MP_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM3_ROOT>,
+					 <&clk IMX8MP_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM4_ROOT>,
+					 <&clk IMX8MP_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+
+			gpt6: timer@306e0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x306e0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT6_ROOT>, <&clk IMX8MP_CLK_GPT6>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt5: timer@306f0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x306f0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT5_ROOT>, <&clk IMX8MP_CLK_GPT5>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt4: timer@30700000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x30700000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT4_ROOT>, <&clk IMX8MP_CLK_GPT4>;
+				clock-names = "ipg", "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				reg = <0x30800000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				ecspi1: spi@30820000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@30830000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@30840000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
+						 <&clk IMX8MP_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
+						 <&clk IMX8MP_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
+						 <&clk IMX8MP_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				flexcan1: can@308c0000 {
+					compatible = "fsl,imx8mp-flexcan";
+					reg = <0x308c0000 0x10000>;
+					interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+						 <&clk IMX8MP_CLK_CAN1_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+					assigned-clock-rates = <40000000>;
+					fsl,clk-source = /bits/ 8 <0>;
+					fsl,stop-mode = <&gpr 0x10 4>;
+					status = "disabled";
+				};
+
+				flexcan2: can@308d0000 {
+					compatible = "fsl,imx8mp-flexcan";
+					reg = <0x308d0000 0x10000>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+						 <&clk IMX8MP_CLK_CAN2_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+					assigned-clock-rates = <40000000>;
+					fsl,clk-source = /bits/ 8 <0>;
+					fsl,stop-mode = <&gpr 0x10 5>;
+					status = "disabled";
+				};
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_AHB>,
+					 <&clk IMX8MP_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART4_ROOT>,
+					 <&clk IMX8MP_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			mu2: mailbox@30e60000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30e60000 0x10000>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@30ad0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ad0000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C5_ROOT>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@30ae0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ae0000 0x10000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C6_ROOT>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			flexspi: spi@30bb0000 {
+				compatible = "nxp,imx8mp-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_QSPI_ROOT>,
+					 <&clk IMX8MP_CLK_QSPI_ROOT>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_QSPI>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MP_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec: ethernet@30be0000 {
+				compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ENET1_ROOT>,
+					 <&clk IMX8MP_CLK_SIM_ENET_ROOT>,
+					 <&clk IMX8MP_CLK_ENET_TIMER>,
+					 <&clk IMX8MP_CLK_ENET_REF>,
+					 <&clk IMX8MP_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+						  <&clk IMX8MP_CLK_ENET_TIMER>,
+						  <&clk IMX8MP_CLK_ENET_REF>,
+						  <&clk IMX8MP_CLK_ENET_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+							 <&clk IMX8MP_SYS_PLL2_100M>,
+							 <&clk IMX8MP_SYS_PLL2_125M>,
+							 <&clk IMX8MP_SYS_PLL2_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+			eqos: ethernet@30bf0000 {
+				compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x30bf0000 0x10000>;
+				interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+					 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+					 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+					 <&clk IMX8MP_CLK_ENET_QOS>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+						  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+						  <&clk IMX8MP_CLK_ENET_QOS>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+							 <&clk IMX8MP_SYS_PLL2_100M>,
+							 <&clk IMX8MP_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>;
+				nvmem-cells = <&eth_mac2>;
+				nvmem-cell-names = "mac-address";
+				intf_mode = <&gpr 0x4>;
+				status = "disabled";
+			};
+		};
+
+		aips5: bus@30c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba-bus@30c00000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				reg = <0x30c00000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				sai1: sai@30c10000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c10000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai2: sai@30c20000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c20000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai3: sai@30c30000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c30000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai5: sai@30c50000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c50000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai6: sai@30c60000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c60000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai7: sai@30c80000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c80000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+			};
+
+			sdma3: dma-controller@30e00000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30e00000 0x10000>;
+				#dma-cells = <3>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>,
+					 <&clk IMX8MP_CLK_AUDIO_ROOT>;
+				clock-names = "ipg", "ahb";
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma2: dma-controller@30e10000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30e10000 0x10000>;
+				#dma-cells = <3>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>,
+					 <&clk IMX8MP_CLK_AUDIO_ROOT>;
+				clock-names = "ipg", "ahb";
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			audio_blk_ctrl: clock-controller@30e20000 {
+				compatible = "fsl,imx8mp-audio-blk-ctrl";
+				reg = <0x30e20000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+					 <&clk IMX8MP_CLK_SAI1>,
+					 <&clk IMX8MP_CLK_SAI2>,
+					 <&clk IMX8MP_CLK_SAI3>,
+					 <&clk IMX8MP_CLK_SAI5>,
+					 <&clk IMX8MP_CLK_SAI6>,
+					 <&clk IMX8MP_CLK_SAI7>;
+				clock-names = "ahb",
+					      "sai1", "sai2", "sai3",
+					      "sai5", "sai6", "sai7";
+				power-domains = <&pgc_audio>;
+			};
+		};
+
+		noc: interconnect@32700000 {
+			compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MP_CLK_NOC>;
+			#interconnect-cells = <1>;
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-1000000000 {
+					opp-hz = /bits/ 64 <1000000000>;
+				};
+			};
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			isi_0: isi@32e00000 {
+				compatible = "fsl,imx8mp-isi";
+				reg = <0x32e00000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+				clock-names = "axi", "apb";
+				fsl,blk-ctrl = <&media_blk_ctrl>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						isi_in_0: endpoint {
+							remote-endpoint = <&mipi_csi_0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						isi_in_1: endpoint {
+							remote-endpoint = <&mipi_csi_1_out>;
+						};
+					};
+				};
+			};
+
+			dewarp: dwe@32e30000 {
+				compatible = "nxp,imx8mp-dw100";
+				reg = <0x32e30000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+				clock-names = "axi", "ahb";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>;
+			};
+
+			mipi_csi_0: csi@32e40000 {
+				compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e40000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+				assigned-clock-rates = <500000000>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_0_out: endpoint {
+							remote-endpoint = <&isi_in_0>;
+						};
+					};
+				};
+			};
+
+			mipi_csi_1: csi@32e50000 {
+				compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e50000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <266000000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+				assigned-clock-rates = <266000000>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_1_out: endpoint {
+							remote-endpoint = <&isi_in_1>;
+						};
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e60000 {
+				compatible = "fsl,imx8mp-mipi-dsim";
+				reg = <0x32e60000 0x400>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_APB>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_CLK_24M>;
+				assigned-clock-rates = <200000000>, <24000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_DSI_1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif1: endpoint {
+							remote-endpoint = <&lcdif1_to_dsim>;
+						};
+					};
+				};
+			};
+
+			lcdif1: display-controller@32e80000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32e80000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>;
+				status = "disabled";
+
+				port {
+					lcdif1_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif1>;
+					};
+				};
+			};
+
+			lcdif2: display-controller@32e90000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32e90000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>;
+				status = "disabled";
+
+				port {
+					lcdif2_to_ldb: endpoint {
+						remote-endpoint = <&ldb_from_lcdif2>;
+					};
+				};
+			};
+
+			media_blk_ctrl: blk-ctrl@32ec0000 {
+				compatible = "fsl,imx8mp-media-blk-ctrl",
+					     "syscon";
+				reg = <0x32ec0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				power-domains = <&pgc_mediamix>,
+						<&pgc_mipi_phy1>,
+						<&pgc_mipi_phy1>,
+						<&pgc_mediamix>,
+						<&pgc_mediamix>,
+						<&pgc_mipi_phy2>,
+						<&pgc_mediamix>,
+						<&pgc_ispdwp>,
+						<&pgc_ispdwp>,
+						<&pgc_mipi_phy2>;
+				power-domain-names = "bus", "mipi-dsi1", "mipi-csi1",
+						     "lcdif1", "isi", "mipi-csi2",
+						     "lcdif2", "isp", "dwe",
+						     "mipi-dsi2";
+				interconnects =
+					<&noc IMX8MP_ICM_LCDIF_RD &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_LCDIF_WR &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI0 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI1 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI2 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISP0 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISP1 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_DWE &noc IMX8MP_ICN_MEDIA>;
+				interconnect-names = "lcdif-rd", "lcdif-wr", "isi0",
+						     "isi1", "isi2", "isp0", "isp1",
+						     "dwe";
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>;
+				clock-names = "apb", "axi", "cam1", "cam2",
+					      "disp1", "disp2", "isp", "phy";
+
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
+						  <&clk IMX8MP_CLK_MEDIA_APB>,
+						  <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+						  <&clk IMX8MP_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MP_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <500000000>, <200000000>,
+						       <0>, <0>, <1039500000>;
+				#power-domain-cells = <1>;
+
+				lvds_bridge: bridge@5c {
+					compatible = "fsl,imx8mp-ldb";
+					reg = <0x5c 0x4>, <0x128 0x4>;
+					reg-names = "ldb", "lvds";
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					clock-names = "ldb";
+					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif2: endpoint {
+								remote-endpoint = <&lcdif2_to_ldb>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							ldb_lvds_ch1: endpoint {
+							};
+						};
+					};
+				};
+			};
+
+			pcie_phy: pcie-phy@32f00000 {
+				compatible = "fsl,imx8mp-pcie-phy";
+				reg = <0x32f00000 0x10000>;
+				resets = <&src IMX8MP_RESET_PCIEPHY>,
+					 <&src IMX8MP_RESET_PCIEPHY_PERST>;
+				reset-names = "pciephy", "perst";
+				power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsio_blk_ctrl: blk-ctrl@32f10000 {
+				compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+				reg = <0x32f10000 0x24>;
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+					 <&clk IMX8MP_CLK_PCIE_ROOT>;
+				clock-names = "usb", "pcie";
+				power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+						<&pgc_usb1_phy>, <&pgc_usb2_phy>,
+						<&pgc_hsiomix>, <&pgc_pcie_phy>;
+				power-domain-names = "bus", "usb", "usb-phy1",
+						     "usb-phy2", "pcie", "pcie-phy";
+				interconnects = <&noc IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>;
+				interconnect-names = "noc-pcie", "usb1", "usb2", "pcie";
+				#power-domain-cells = <1>;
+				#clock-cells = <0>;
+			};
+		};
+
+		pcie: pcie@33800000 {
+			compatible = "fsl,imx8mp-pcie";
+			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_HSIO_AXI>,
+				 <&clk IMX8MP_CLK_PCIE_ROOT>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+			assigned-clock-rates = <10000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <3>;
+			linux,pci-domain = <0>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
+		pcie_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mp-pcie-ep";
+			reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
+			reg-names = "dbi", "addr_space";
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_HSIO_AXI>,
+				 <&clk IMX8MP_CLK_PCIE_ROOT>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+			assigned-clock-rates = <10000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+			interrupt-names = "dma";
+			fsl,max-link-speed = <3>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
+		gpu3d: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x8000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>,
+				 <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>,
+				 <&clk IMX8MP_CLK_GPU_ROOT>,
+				 <&clk IMX8MP_CLK_GPU_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
+					  <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+						 <&clk IMX8MP_SYS_PLL1_800M>;
+			assigned-clock-rates = <800000000>, <800000000>;
+			power-domains = <&pgc_gpu3d>;
+		};
+
+		gpu2d: gpu@38008000 {
+			compatible = "vivante,gc";
+			reg = <0x38008000 0x8000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>,
+				 <&clk IMX8MP_CLK_GPU_ROOT>,
+				 <&clk IMX8MP_CLK_GPU_AHB>;
+			clock-names = "core", "bus", "reg";
+			assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+			assigned-clock-rates = <800000000>;
+			power-domains = <&pgc_gpu2d>;
+		};
+
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mm-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <500000000>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
+		};
+
+		vpumix_blk_ctrl: blk-ctrl@38330000 {
+			compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon";
+			reg = <0x38330000 0x100>;
+			#power-domain-cells = <1>;
+			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+					<&pgc_vpu_g2>, <&pgc_vpu_vc8000e>;
+			power-domain-names = "bus", "g1", "g2", "vc8000e";
+			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MP_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+			clock-names = "g1", "g2", "vc8000e";
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>, <600000000>;
+			interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
+					<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
+					<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
+			interconnect-names = "g1", "g2", "vc8000e";
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,
+			      <0x38880000 0xc0000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		edacmc: memory-controller@3d400000 {
+			compatible = "snps,ddrc-3.80a";
+			reg = <0x3d400000 0x400000>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb3_phy0: usb-phy@381f0040 {
+			compatible = "fsl,imx8mp-usb-phy";
+			reg = <0x381f0040 0x40>;
+			clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb3_0: usb@32f10100 {
+			compatible = "fsl,imx8mp-dwc3";
+			reg = <0x32f10100 0x8>,
+			      <0x381f0000 0x20>;
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_USB_SUSP>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+			ranges;
+			status = "disabled";
+
+			usb_dwc3_0: usb@38100000 {
+				compatible = "snps,dwc3";
+				reg = <0x38100000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+					 <&clk IMX8MP_CLK_USB_CORE_REF>,
+					 <&clk IMX8MP_CLK_USB_SUSP>;
+				clock-names = "bus_early", "ref", "suspend";
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy0>, <&usb3_phy0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
+			};
+
+		};
+
+		usb3_phy1: usb-phy@382f0040 {
+			compatible = "fsl,imx8mp-usb-phy";
+			reg = <0x382f0040 0x40>;
+			clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb3_1: usb@32f10108 {
+			compatible = "fsl,imx8mp-dwc3";
+			reg = <0x32f10108 0x8>,
+			      <0x382f0000 0x20>;
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_USB_SUSP>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+			ranges;
+			status = "disabled";
+
+			usb_dwc3_1: usb@38200000 {
+				compatible = "snps,dwc3";
+				reg = <0x38200000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+					 <&clk IMX8MP_CLK_USB_CORE_REF>,
+					 <&clk IMX8MP_CLK_USB_SUSP>;
+				clock-names = "bus_early", "ref", "suspend";
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy1>, <&usb3_phy1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
+			};
+		};
+
+		dsp: dsp@3b6e8000 {
+			compatible = "fsl,imx8mp-dsp";
+			reg = <0x3b6e8000 0x88000>;
+			mbox-names = "txdb0", "txdb1",
+				"rxdb0", "rxdb1";
+			mboxes = <&mu2 2 0>, <&mu2 2 1>,
+				<&mu2 3 0>, <&mu2 3 1>;
+			memory-region = <&dsp_reserved>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
new file mode 100644
index 0000000000..7507548cdb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "NXP i.MX8MQ EVK";
+	compatible = "fsl,imx8mq-evk", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0xc0000000>;
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pcie1: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie1_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	buck2_reg: regulator-buck2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buck2>;
+		compatible = "regulator-gpio";
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1000000>;
+		gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		states = <1000000 0x0
+			  900000 0x1>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+		linux,autosuspend-period = <125>;
+	};
+
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	wm8524: audio-codec {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8524-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Line", "Left Line Out Jack",
+			"Line", "Right Line Out Jack";
+		simple-audio-card,routing =
+			"Left Line Out Jack", "LINEVOUTL",
+			"Right Line Out Jack", "LINEVOUTR";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&wm8524>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif1>;
+		spdif-out;
+		spdif-in;
+	};
+
+	sound-hdmi-arc {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-hdmi-arc";
+		spdif-controller = <&spdif2>;
+		spdif-in;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+	status = "okay";
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		/*
+		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
+		 */
+		opp-166000000 {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&dphy {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddh>;
+
+			vddh: vddh-regulator {
+			};
+		};
+	};
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+
+	wl-reg-on-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		pinctrl-0 = <&pinctrl_mipi_dsi>;
+		pinctrl-names = "default";
+		compatible = "raydium,rm67191";
+		reg = <0>;
+		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+		dsi-lanes = <4>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	vph-supply = <&vgen5_reg>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	vpcie-supply = <&reg_pcie1>;
+	vph-supply = <&vgen5_reg>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	n25q256a: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&spdif2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_SPDIF2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&sw4_reg>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_buck2: vddarmgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x4f
+		>;
+	};
+
+	pinctrl_mipi_dsi: mipidsigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6		0x16
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B		0x76
+			MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28		0x16
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B		0x76
+			MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12		0x16
+		>;
+	};
+
+	pinctrl_pcie1_reg: pcie1reggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10		0x16
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0     0xd6
+		>;
+	};
+
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdog1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wifi_reset: wifiresetgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29		0x16
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
new file mode 100644
index 0000000000..366693f319
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/usb/pd.h"
+#include "imx8mq-sr-som.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MQ HummingBoard Pulse";
+	compatible = "solidrun,hummingboard-pulse", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v_5v0";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	typec_ptn5100: usb-typec@50 {
+		compatible = "nxp,ptn5110";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 2000,
+						 PDO_FIXED_USB_COMM |
+						 PDO_FIXED_SUSPEND |
+						 PDO_FIXED_EXTPOWER)>;
+			sink-pdos = <PDO_FIXED(5000, 2000,
+					       PDO_FIXED_USB_COMM |
+					       PDO_FIXED_SUSPEND |
+					       PDO_FIXED_EXTPOWER)
+				     PDO_FIXED(9000, 2000,
+					       PDO_FIXED_USB_COMM |
+					       PDO_FIXED_SUSPEND |
+					       PDO_FIXED_EXTPOWER)>;
+			op-sink-microwatt = <9000000>;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		status = "okay";
+	};
+
+	rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+		abracon,tc-diode = "schottky";
+		abracon,tc-resistor = <3>;
+	};
+};
+
+&uart2 { /* J35 header */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+&uart3 { /* Mikrobus */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* MikroBus Analog */
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x41
+			/* MikroBus Reset */
+			MX8MQ_IOMUXC_SAI2_RXD0_GPIO4_IO23		0x41
+			/*
+			 * The following 2 pins need to be commented out and
+			 * reconfigured to enable RTS/CTS on UART3
+			 */
+			/* MikroBus PWM */
+			MX8MQ_IOMUXC_ECSPI1_MISO_GPIO5_IO8		0x41
+			/* MikroBus INT */
+			MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL		0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x4000007f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x4000007f
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15	0x16
+			MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x17059
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			/*
+			 * These pins are by default GPIO on the Mikro Bus
+			 * Header. To use RTS/CTS on UART3 comment them out
+			 * of the hoggrp and enable them here
+			 */
+			/* MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x49 */
+			/* MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x49 */
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2vmmcgpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8d
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcd
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcd
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcd
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcd
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcd
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9f
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdf
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdf
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdf
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdf
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdf
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
new file mode 100644
index 0000000000..6376417e91
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for the Kontron pitx-imx8m board.
+ *
+ * Copyright (C) 2021 Heiko Thiery <heiko.thiery@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "Kontron pITX-imx8m";
+	compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &qspi0;
+		spi1 = &ecspi2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	pcie0_refclk: pcie0-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie1_refclk: pcie1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		regulator-name = "V_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670";
+		reg = <0>;
+		spi-max-frequency = <43000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10>;
+			reset-deassert-us = <280>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pfuze-support-disable-sw;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-name = "V_0V9_GPU";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-name = "V_0V9_VPU";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "V_1V1_NVCC_DRAM";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-name = "V_1V0_DRAM";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-name = "V_1V8_S0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-name = "NC";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-name = "V_0V9_SNVS";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-name = "V_0V55_VREF_DDR";
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-name = "V_1V5_CSI";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "V_0V9_PHY";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-name = "V_1V8_PHY";
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-name = "V_1V8_VDDA";
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-name = "V_3V3_PHY";
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-name = "V_2V8_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	fan-controller@1b {
+		compatible = "maxim,max6650";
+		reg = <0x1b>;
+		maxim,fan-microvolt = <5000000>;
+	};
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	sensor@4b {
+		compatible = "national,lm75b";
+		reg = <0x4b>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* M.2 B-key slot */
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	status = "okay";
+};
+
+/* Intel Ethernet Controller I210/I211 */
+&pcie1 {
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie1_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	fsl,max-link-speed = <1>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&sw4_reg>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19 /* TPM Reset */
+			MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19 /* USB2 Hub Reset */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19 /* GPIO0 */
+			MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19 /* GPIO1 */
+			MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17		0x19 /* GPIO2 */
+			MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18		0x19 /* GPIO3 */
+			MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19 /* GPIO4 */
+			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10		0x19 /* GPIO5 */
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x19 /* GPIO6 */
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x19 /* GPIO7 */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x16 /* PCIE_PERST */
+			MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29		0x16 /* W_DISABLE */
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x16
+			MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x16
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x19
+			MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x19
+			MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x19
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x49
+			MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+			MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20			0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8d
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcd
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcd
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcd
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcd
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcd
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9f
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdf
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdf
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdf
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdf
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdf
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x19
+			MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x19
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
new file mode 100644
index 0000000000..8055a2c230
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -0,0 +1,1044 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 Purism SPC
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/usb/pd.h"
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Purism Librem 5 devkit";
+	compatible = "purism,librem5-devkit", "fsl,imx8mq";
+
+	backlight_dsi: backlight-dsi {
+		compatible = "pwm-backlight";
+		/* 200 Hz for the PAM2841 */
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		/* Default brightness level (index into the array defined by */
+		/* the "brightness-levels" property) */
+		default-brightness-level = <0>;
+		power-supply = <&reg_22v4_p>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-1 {
+			label = "VOL_UP";
+			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-2 {
+			label = "VOL_DOWN";
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-3 {
+			label = "WWAN_WAKE";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+			wakeup-source;
+			linux,code = <KEY_PHONE>;
+		};
+	};
+
+	leds {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			pwms = <&pwm2 0 50000 0>;
+		};
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_1v8_p: regulator-1v8-p {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8_p";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_pwr_en>;
+	};
+
+	reg_2v8_p: regulator-2v8-p {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8_p";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_pwr_en>;
+	};
+
+	reg_3v3_p: regulator-3v3-p {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_p";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_pwr_en>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	reg_5v_p: regulator-5v-p {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_p";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_pwr_en>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	reg_22v4_p: regulator-22v4-p  {
+		compatible = "regulator-fixed";
+		regulator-name = "22v4_P";
+		regulator-min-microvolt = <22400000>;
+		regulator-max-microvolt = <22400000>;
+		vin-supply = <&reg_pwr_en>;
+	};
+
+	reg_pwr_en: regulator-pwr-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwr_en>;
+		regulator-name = "PWR_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	wwan_codec: sound-wwan-codec {
+		compatible = "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
+	mic_mux: mic-mux {
+		compatible = "simple-audio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_micsel>;
+		mux-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		sound-name-prefix = "Mic Mux";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hpdet>;
+		simple-audio-card,aux-devs = <&speaker_amp>, <&mic_mux>;
+		simple-audio-card,name = "Librem 5 Devkit";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Builtin Microphone",
+			"Microphone", "Headset Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Builtin Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Mux OUT",
+			"Mic Mux IN1", "Headset Microphone",
+			"Mic Mux IN2", "Builtin Microphone",
+			"Mic Mux OUT", "Mic Bias",
+			"Headphones", "HP_OUT",
+			"Builtin Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INR", "LINE_OUT";
+		simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	sound-wwan {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SIMCom SIM7100";
+		simple-audio-card,format = "dsp_a";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+
+		telephony_link_master: simple-audio-card,codec {
+			sound-dai = <&wwan_codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	speaker_amp: speaker-amp {
+		compatible = "simple-audio-amplifier";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spkamp>;
+		VCC-supply = <&reg_3v3_p>;
+		sound-name-prefix = "Speaker Amp";
+		enable-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_haptic>;
+	        enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_3v3_p>;
+	};
+
+	wifi_pwr_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		regulator-name = "WIFI_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	wifi_pwr_seq: pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_rst>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&dphy {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-supply = <&reg_3v3_p>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		clocks = <&pmic_osc>;
+		clock-names = "osc";
+		#clock-cells = <0>;
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				rohm,dvs-run-voltage = <1000000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	typec_ptn5100: usb-typec@52 {
+		compatible = "nxp,ptn5110";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 2000,
+				PDO_FIXED_USB_COMM |
+				PDO_FIXED_DUAL_ROLE |
+				PDO_FIXED_DATA_SWAP )>;
+			sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM |
+				PDO_FIXED_DUAL_ROLE |
+				PDO_FIXED_DATA_SWAP )
+			     PDO_VAR(5000, 5000, 3500)>;
+			op-sink-microwatt = <10000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_con_hs: endpoint {
+						remote-endpoint = <&typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_con_ss: endpoint {
+						remote-endpoint = <&typec_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	charger@6b { /* bq25896 */
+		compatible = "ti,bq25890";
+		reg = <0x6b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_charger>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		ti,battery-regulation-voltage = <4192000>; /* 4.192V */
+		ti,charge-current = <1600000>; /* 1.6A */
+		ti,termination-current = <66000>;  /* 66mA */
+		ti,precharge-current = <130000>; /* 130mA */
+		ti,minimum-sys-voltage = <3000000>; /* 3V */
+		ti,boost-voltage = <5000000>; /* 5V */
+		ti,boost-max-current = <50000>; /* 50mA */
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	magnetometer@1e	{
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&reg_3v3_p>;
+		vddio-supply = <&reg_3v3_p>;
+	};
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+		assigned-clock-rates = <24576000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDD-supply = <&reg_1v8_p>;
+		VDDIO-supply = <&reg_3v3_p>;
+		VDDA-supply = <&reg_3v3_p>;
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt5688";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+		AVDD28-supply = <&reg_2v8_p>;
+		VDDIO-supply = <&reg_1v8_p>;
+	};
+
+	proximity-sensor@60 {
+		compatible = "vishay,vcnl4040";
+		reg = <0x60>;
+		pinctrl-0 = <&pinctrl_prox>;
+	};
+
+	accel-gyro@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		vdd-supply = <&reg_3v3_p>;
+		vddio-supply = <&reg_3v3_p>;
+		mount-matrix = "1",  "0",  "0",
+			       "0",  "1",  "0",
+			       "0",  "0", "-1";
+	};
+};
+
+&iomuxc {
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT	0x6 /* DSI_BL_PWM */
+		>;
+	};
+
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11	0x16 /* nBT_DISABLE */
+			MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7	0x10 /* BT_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_charger: chargergrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x80 /* CHRG_nINT */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0		0x16  /* TOUCH INT */
+			MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x19  /* TOUCH RST */
+		>;
+	};
+
+	pinctrl_pwm_led: pwmledgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x16
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeygrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x16
+			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22	0x16
+			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8	0x80   /* nWoWWAN */
+		>;
+	};
+
+	pinctrl_haptic: hapticgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4		0xc6   /* nHAPTIC */
+		>;
+	};
+
+	pinctrl_hpdet: hpdetgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0xC0   /* HP_DET */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x4000001f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x4000001f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x4000001f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x4000001f
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19	0x8  /* IMU_INT */
+		>;
+	};
+
+	pinctrl_micsel: micselgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0xc6  /* MIC_SEL */
+		>;
+	};
+
+	pinctrl_spkamp: spkampgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3		0x81  /* MUTE */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x80  /* PMIC intr */
+		>;
+	};
+
+	pinctrl_prox: proxgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x80  /* prox intr */
+		>;
+	};
+
+	pinctrl_pwr_en: pwrengrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x06
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29	0x80  /* RTC intr */
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
+			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x16
+			MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x80
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
+			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x49
+			MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x49
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_rst: usdhc2rstgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20		0x80 /* WIFI_WAKE */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xc3
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x8d
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcd
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcd
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcd
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcd
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcd
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcf
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcf
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcf
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcf
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcf
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5         0x06
+		>;
+	};
+
+	pinctrl_wwan: wwangrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4	0x09 /* nWWAN_DISABLE */
+			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8	0x80 /* nWoWWAN */
+			MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9	0x19 /* WWAN_RESET */
+		>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel@0 {
+		compatible = "rocktech,jh057n00900";
+		reg = <0>;
+		backlight = <&backlight_dsi>;
+		reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		iovcc-supply = <&reg_1v8_p>;
+		vcc-supply = <&reg_2v8_p>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pgc_gpu {
+	power-supply = <&buck3_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&buck4_reg>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_led>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai6>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 { /* GNSS */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_5v_p>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_5v_p>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "otg";
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		typec_ss: endpoint {
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&wifi_pwr_en>;
+	mmc-pwrseq = <&wifi_pwr_seq>;
+	broken-cd;
+	disable-wp;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
new file mode 100644
index 0000000000..cf40025111
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+//
+// Librem 5 Chestnut
+
+/dts-v1/;
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+	model = "Purism Librem 5r2";
+	compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq";
+};
+
+&accel_gyro {
+	mount-matrix = "1",  "0",  "0",
+		       "0", "-1",  "0",
+		       "0",  "0",  "1";
+};
+
+&bq25895 {
+	ti,charge-current = <1600000>; /* uA */
+};
+
+&proximity {
+	proximity-near-level = <50>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
new file mode 100644
index 0000000000..077c5cd258
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+#include "imx8mq-librem5-r3.dtsi"
+
+&a53_opp_table {
+	opp-1000000000 {
+		opp-microvolt = <950000>;
+	};
+};
+
+&buck3_reg {
+	regulator-always-on;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
new file mode 100644
index 0000000000..17f86496f8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+/*
+ * This file describes hardware that is shared among r3 ("Dogwood") and
+ * later revisions of the Librem 5 so it has to be included in dts there.
+ */
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+	model = "Purism Librem 5r3";
+	compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
+};
+
+&accel_gyro {
+	mount-matrix = "1",  "0",  "0",
+		       "0",  "1",  "0",
+		       "0",  "0", "-1";
+};
+
+&bq25895 {
+	ti,charge-current = <1500000>; /* uA */
+};
+
+&camera_front {
+	pinctrl-0 = <&pinctrl_csi1>, <&pinctrl_r3_camera_pwr>;
+	shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_r3_camera_pwr: r3camerapwrgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4		0x83
+		>;
+	};
+};
+
+&magnetometer {
+	mount-matrix = "1",  "0",  "0",
+		       "0", "-1",  "0",
+		       "0",  "0", "-1";
+};
+
+&proximity {
+	proximity-near-level = <10>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
new file mode 100644
index 0000000000..33f398b481
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+#include "imx8mq-librem5-r3.dtsi"
+
+/ {
+	model = "Purism Librem 5r4";
+	compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq";
+};
+
+&bat {
+	maxim,rsns-microohm = <1667>;
+};
+
+&led_backlight {
+	led-max-microamp = <25000>;
+};
+
+&lcd_panel {
+	compatible = "ys,ys57pss36bh5gq";
+};
+
+&proximity {
+	proximity-near-level = <7>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
new file mode 100644
index 0000000000..138a4d36a7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -0,0 +1,1422 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 Purism SPC
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/usb/pd.h"
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Purism Librem 5";
+	compatible = "purism,librem5", "fsl,imx8mq";
+	chassis-type = "handset";
+
+	backlight_dsi: backlight-dsi {
+		compatible = "led-backlight";
+		leds = <&led_backlight>;
+		brightness-levels = <255>;
+		default-brightness-level = <190>;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keys>;
+
+		key-vol-down {
+			label = "VOL_DOWN";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <50>;
+			wakeup-source;
+		};
+
+		key-vol-up {
+			label = "VOL_UP";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <50>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <248>;
+
+			led-0 {
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm2 0 50000 0>;
+			};
+
+			led-1 {
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm4 0 50000 0>;
+			};
+
+			led-2 {
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm3 0 50000 0>;
+			};
+		};
+	};
+
+	reg_aud_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audiopwr>;
+		regulator-name = "AUD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mic_2v4: regulator-mic-2v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "MIC_2V4";
+		regulator-min-microvolt = <2400000>;
+		regulator-max-microvolt = <2400000>;
+		vin-supply = <&reg_aud_1v8>;
+	};
+
+	/*
+	 * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
+	 * since we can't have it twice in the 2 different regulator nodes.
+	 */
+	reg_csi_1v8: regulator-csi-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDIO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_vdd_3v3>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* controlled by the CAMERA_POWER_KEY HKS */
+	reg_vcam_1v2: regulator-vcam-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDD_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_vdd_1v8>;
+		enable-active-high;
+	};
+
+	reg_vcam_2v8: regulator-vcam-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDA_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_vdd_3v3>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_gnss: regulator-gnss {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gnsspwr>;
+		regulator-name = "GNSS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_hub: regulator-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hub_pwr>;
+		regulator-name = "HUB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_1v8: regulator-lcd-1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsien>;
+		regulator-name = "LCD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_vdd_1v8>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Otherwise i2c3 is not functional */
+		regulator-always-on;
+	};
+
+	reg_lcd_3v4: regulator-lcd-3v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_3V4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsibiasen>;
+		vin-supply = <&reg_vsys_3v4>;
+		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vdd_sen: regulator-vdd-sen {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SEN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&buck7_reg>;
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vsys_3v4: regulator-vsys-3v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V4";
+		regulator-min-microvolt = <3400000>;
+		regulator-max-microvolt = <3400000>;
+		regulator-always-on;
+	};
+
+	reg_wifi_3v3: regulator-wifi-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr>;
+		regulator-name = "3V3_WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd_3v3>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		simple-audio-card,name = "Librem 5";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Headphone", "Headphones",
+			"Microphone", "Headset Mic",
+			"Microphone", "Digital Mic",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Headphones", "HPOUTL",
+			"Headphones", "HPOUTR",
+			"Speaker", "SPKOUTL",
+			"Speaker", "SPKOUTR",
+			"Headset Mic", "MICBIAS",
+			"IN3R", "Headset Mic",
+			"DMICDAT", "Digital Mic";
+		simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	sound-wwan {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Modem";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+			frame-inversion;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bm818_codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	usdhc2_pwrseq: pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>,
+			      <&gpio4 29 GPIO_ACTIVE_HIGH>;
+	};
+
+	bm818_codec: sound-wwan-codec {
+		compatible = "broadmobi,bm818", "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm1 0 1000000000 0>;
+		pwm-names = "enable";
+		vcc-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&csi1 {
+	status = "okay";
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+	status = "okay";
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-166000000 {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&dphy {
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nor_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "protected0";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "firmware";
+			reg = <0x30000 0x1d0000>;
+			read-only;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic_5v>;
+
+	pmic-5v-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		input;
+		lane-mapping = "pmic-5v";
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* CLKO2 for cameras on both CSI1 and CSI2 */
+			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
+		>;
+	};
+
+	pinctrl_audiopwr: audiopwrgrp {
+		fsl,pins = <
+			/* AUDIO_POWER_EN_3V3 */
+			MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x83
+		>;
+	};
+
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			/* BACKLINGE_EN */
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14	0x83
+		>;
+	};
+
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			/* BT_REG_ON */
+			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x83
+		>;
+	};
+
+	pinctrl_camera_pwr: camerapwrgrp {
+		fsl,pins = <
+			/* CAMERA_PWR_EN_3V3 */
+			MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x83
+		>;
+	};
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			/* CSI1_NRST */
+			MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25	0x83
+		>;
+	};
+
+	pinctrl_charger_in: chargeringrp {
+		fsl,pins = <
+			/* CHRG_INT */
+			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3	0x80
+		>;
+	};
+
+	pinctrl_dsibiasen: dsibiasengrp {
+		fsl,pins = <
+			/* DSI_BIAS_EN */
+			MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20	0x83
+		>;
+	};
+
+	pinctrl_dsien: dsiengrp {
+		fsl,pins = <
+			/* DSI_EN_3V3 */
+			MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x83
+		>;
+	};
+
+	pinctrl_dsirst: dsirstgrp {
+		fsl,pins = <
+			/* DSI_RST */
+			MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29	0x83
+			/* DSI_TE */
+			MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28	0x83
+			/* TP_RST */
+			MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24	0x83
+		>;
+	};
+
+	pinctrl_ecspi1: ecspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x83
+			MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x83
+			MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x19
+			MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x83
+		>;
+	};
+
+	pinctrl_gauge: gaugegrp {
+		fsl,pins = <
+			/* BAT_LOW */
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0x80
+		>;
+	};
+
+	pinctrl_gnsspwr: gnsspwrgrp {
+		fsl,pins = <
+			/* GPS3V3_EN */
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12	0x83
+		>;
+	};
+
+	pinctrl_haptic: hapticgrp {
+		fsl,pins = <
+			/* MOTO */
+			MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT	0x83
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			/* HEADPHONE_DET_1V8 */
+			MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9	0x180
+		>;
+	};
+
+	pinctrl_hub_pwr: hubpwrgrp {
+		fsl,pins = <
+			/* HUB_PWR_3V3_EN */
+			MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x83
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_keys: keysgrp {
+		fsl,pins = <
+			/* VOL- */
+			MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17	0x01C0
+			/* VOL+ */
+			MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16	0x01C0
+		>;
+	};
+
+	pinctrl_led_b: ledbgrp {
+		fsl,pins = <
+			/* LED_B */
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x06
+		>;
+	};
+
+	pinctrl_led_g: ledggrp {
+		fsl,pins = <
+			/* LED_G */
+			MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT		0x06
+		>;
+	};
+
+	pinctrl_led_r: ledrgrp {
+		fsl,pins = <
+			/* LED_R */
+			MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT		0x06
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			/* INT_MAG */
+			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x80
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC_NINT */
+			MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x80
+		>;
+	};
+
+	pinctrl_pmic_5v: pmic5vgrp {
+		fsl,pins = <
+			/* PMIC_5V */
+			MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x80
+		>;
+	};
+
+	pinctrl_prox: proxgrp {
+		fsl,pins = <
+			/* INT_LIGHT */
+			MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7	0x80
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			/* RTC_INT */
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x80
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_tcpc: tcpcgrp {
+		fsl,pins = <
+			/* TCPC_INT */
+			MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x01C0
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* TP_INT */
+			MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27	0x80
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			/* TYPEC_MUX_EN */
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x83
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX	0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX	0x49
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX	0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX	0x49
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x49
+			MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xc3
+			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x8d
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcd
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcd
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcd
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcd
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcd
+			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcf
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcf
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcf
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcf
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcf
+			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+		>;
+	};
+
+	pinctrl_wifi_disable: wifidisablegrp {
+		fsl,pins = <
+			/* WIFI_REG_ON */
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29	0x83
+		>;
+	};
+
+	pinctrl_wifi_pwr: wifipwrgrp {
+		fsl,pins = <
+			/* WIFI3V3_EN */
+			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10	0x83
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			/* nWDOG */
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x1f
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	typec_pd: usb-pd@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+		extcon = <&usb3_phy0>;
+		wakeup-source;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_con_hs: endpoint {
+						remote-endpoint = <&typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_con_ss: endpoint {
+						remote-endpoint = <&typec_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
+		clocks = <&pmic_osc>;
+		#clock-cells = <0>;
+		clock-names = "osc";
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <880000>;
+				rohm,dvs-idle-voltage = <820000>;
+				rohm,dvs-suspend-voltage = <810000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <950000>;
+				rohm,dvs-idle-voltage = <850000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <850000>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				rohm,dvs-run-voltage = <930000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				/* VDD_PHY_0V9 - MIPI and HDMI domains */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* VDD_PHY_0V9 - MIPI, HDMI and USB domains */
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				/* VDD_PHY_3V3 - USB domain */
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magnetometer: magnetometer@1e	{
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&reg_vdd_sen>;
+		vddio-supply = <&reg_vdd_1v8>;
+	};
+
+	regulator@3e {
+		compatible = "tps65132";
+		reg = <0x3e>;
+
+		reg_lcd_avdd: outp {
+			regulator-name = "LCD_AVDD";
+			vin-supply = <&reg_lcd_3v4>;
+		};
+
+		reg_lcd_avee: outn {
+			regulator-name = "LCD_AVEE";
+			vin-supply = <&reg_lcd_3v4>;
+		};
+	};
+
+	proximity: prox@60 {
+		compatible = "vishay,vcnl4040";
+		reg = <0x60>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_prox>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	accel_gyro: accel-gyro@6a	{
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		vdd-supply = <&reg_vdd_sen>;
+		vddio-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+		assigned-clock-rates = <24576000>;
+		#sound-dai-cells = <0>;
+		mic-cfg = <0x200>;
+		DCVDD-supply = <&reg_aud_1v8>;
+		DBVDD-supply = <&reg_aud_1v8>;
+		AVDD-supply = <&reg_aud_1v8>;
+		CPVDD-supply = <&reg_aud_1v8>;
+		MICVDD-supply = <&reg_mic_2v4>;
+		PLLVDD-supply = <&reg_aud_1v8>;
+		SPKVDD1-supply = <&reg_vsys_3v4>;
+		SPKVDD2-supply = <&reg_vsys_3v4>;
+		gpio-cfg = <
+			0x0000 /* n/c */
+			0x0001 /* gpio2, 1: default */
+			0x0013 /* gpio3, 2: dmicclk */
+			0x0000 /* n/c, 3: default */
+			0x8014 /* gpio5, 4: dmic_dat */
+			0x0000 /* gpio6, 5: default */
+		>;
+	};
+
+	camera_front: camera@20 {
+		compatible = "hynix,hi846";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_csi1>;
+		clocks = <&clk IMX8MQ_CLK_CLKO2>;
+		assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>;
+		assigned-clock-rates = <25000000>;
+		reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		vdda-supply = <&reg_vcam_2v8>;
+		vddd-supply = <&reg_vcam_1v2>;
+		vddio-supply = <&reg_csi_1v8>;
+		rotation = <90>;
+		orientation = <0>;
+
+		port {
+			camera1_ep: endpoint {
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64
+					<80000000 200000000 300000000>;
+				remote-endpoint = <&mipi1_sensor_ep>;
+			};
+		};
+	};
+
+	backlight@36 {
+		compatible = "ti,lm36922";
+		reg = <0x36>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bl>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		vled-supply = <&reg_vsys_3v4>;
+		ti,ovp-microvolt = <25000000>;
+
+		led_backlight: led@0 {
+			reg = <0>;
+			label = ":backlight";
+			linux,default-trigger = "backlight";
+			led-max-microamp = <20000>;
+		};
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+		vcc-supply = <&reg_lcd_1v8>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	vcm@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0x0c>;
+		vcc-supply = <&reg_csi_1v8>;
+	};
+
+	bat: fuel-gauge@36 {
+		compatible = "maxim,max17055";
+		reg = <0x36>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gauge>;
+		power-supplies = <&bq25895>;
+		maxim,over-heat-temp = <700>;
+		maxim,over-volt = <4500>;
+		maxim,rsns-microohm = <5000>;
+	};
+
+	bq25895: charger@6a {
+		compatible = "ti,bq25895", "ti,bq25890";
+		reg = <0x6a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_charger_in>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		phys = <&usb3_phy0>;
+		ti,battery-regulation-voltage = <4208000>; /* uV */
+		ti,termination-current = <128000>;  /* uA */
+		ti,precharge-current = <128000>; /* uA */
+		ti,minimum-sys-voltage = <3700000>; /* uV */
+		ti,boost-voltage = <5000000>; /* uV */
+		ti,boost-max-current = <1500000>; /* uA */
+		ti,use-vinmin-threshold = <1>; /* enable VINDPM */
+		ti,vinmin-threshold = <3900000>; /* uV */
+		monitored-battery = <&bat>;
+		power-supplies = <&typec_pd>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_csi1 {
+	assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+
+			mipi1_sensor_ep: endpoint {
+				remote-endpoint = <&camera1_ep>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	lcd_panel: panel@0 {
+		compatible = "mantix,mlaf057we51-x";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsirst>;
+		avdd-supply = <&reg_lcd_avdd>;
+		avee-supply = <&reg_lcd_avee>;
+		vddi-supply = <&reg_lcd_1v8>;
+		backlight = <&backlight_dsi>;
+		reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pgc_gpu {
+	power-supply = <&buck3_reg>;
+};
+
+&pgc_mipi {
+	power-supply = <&ldo5_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&buck4_reg>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_haptic>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led_b>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led_r>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led_g>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai6>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 { /* TPS - GPS - DEBUG */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+
+	gnss {
+		compatible = "globaltop,pa6h";
+		vcc-supply = <&reg_gnss>;
+		current-speed = <9600>;
+	};
+};
+
+&uart3 { /* SMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_hub>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		typec_ss: endpoint {
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Microchip USB2642 */
+	hub@1 {
+		compatible = "usb424,2640";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mass-storage@1 {
+			compatible = "usb424,4041";
+			reg = <1>;
+		};
+	};
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wifi_3v3>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	post-power-on-delay-ms = <20>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	max-frequency = <100000000>;
+	disable-wp;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&a53_opp_table {
+	opp-1000000000 {
+		opp-microvolt = <850000>;
+	};
+
+	opp-1500000000 {
+		opp-microvolt = <950000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
new file mode 100644
index 0000000000..3ae3824be0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Copyright 2019-2021 MNT Research GmbH
+ * Copyright 2021 Lucas Stach <dev@lynxeye.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mq-nitrogen-som.dtsi"
+
+/ {
+	model = "MNT Reform 2";
+	compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
+	chassis-type = "laptop";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 10000 0>;
+		power-supply = <&reg_main_usb>;
+		enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 32 64 128 160 200 255>;
+		default-brightness-level = <6>;
+	};
+
+	panel {
+		compatible = "innolux,n125hce-gn1";
+		power-supply = <&reg_main_3v3>;
+		backlight = <&backlight>;
+		no-hpd;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&edp_bridge_out>;
+			};
+		};
+	};
+
+	pcie1_refclk: clock-pcie1-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_main_5v: regulator-main-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_main_3v3: regulator-main-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_main_usb: regulator-main-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	reg_main_1v8: regulator-main-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_main_3v3>;
+	};
+
+	reg_main_1v2: regulator-main-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8960";
+		audio-cpu = <&sai2>;
+		audio-codec = <&wm8960>;
+		audio-routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"Mic Jack", "MICB",
+			"LINPUT2", "Line In Jack",
+			"RINPUT2", "Line In Jack";
+		model = "wm8960-audio";
+	};
+};
+
+&dphy {
+	assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>;
+	assigned-clock-rates = <25000000>;
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	edp_bridge: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edp_bridge>;
+		reg = <0x2c>;
+		enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		vccio-supply = <&reg_main_1v8>;
+		vpll-supply = <&reg_main_1v8>;
+		vcca-supply = <&reg_main_1v2>;
+		vcc-supply = <&reg_main_1v2>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				edp_bridge_in: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				edp_bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>;
+	/delete-property/assigned-clock-rates;
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&edp_bridge_in>;
+			};
+		};
+	};
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie1_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&reg_1p8v {
+	vin-supply = <&reg_main_5v>;
+};
+
+&reg_snvs {
+	vin-supply = <&reg_main_5v>;
+};
+
+&reg_arm_dram {
+	vin-supply = <&reg_main_5v>;
+};
+
+&reg_dram_1p1v {
+	vin-supply = <&reg_main_5v>;
+};
+
+&reg_soc_gpu_vpu {
+	vin-supply = <&reg_main_5v>;
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	assigned-clock-rates = <25000000>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_main_usb>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_main_usb>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_main_3v3>;
+	vmmc-supply = <&reg_main_3v3>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x3
+		>;
+	};
+
+	pinctrl_edp_bridge: edpbridgegrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20		0x1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000022
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000022
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x16
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT			0x3
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0xd6
+			MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+			MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK		0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x45
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x45
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi
new file mode 100644
index 0000000000..395f77b5ac
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Boundary Devices
+ * Copyright 2021 Lucas Stach <dev@lynxeye.de>
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX8MQ Nitrogen8M";
+	compatible = "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_1p8v: regulator-fixed-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_snvs: regulator-fixed-snvs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SNVS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&{/opp-table/opp-800000000} {
+	opp-microvolt = <1000000>;
+};
+
+&{/opp-table/opp-1000000000} {
+	opp-microvolt = <1000000>;
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm_dram>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm_dram>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm_dram>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm_dram>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
+		reg = <0x70>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1a: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_arm_dram: regulator@60 {
+				compatible = "fcs,fan53555";
+				reg = <0x60>;
+				regulator-name = "VDD_ARM_DRAM_1V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+		};
+
+		i2c1b: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_dram_1p1v: regulator@60 {
+				compatible = "fcs,fan53555";
+				reg = <0x60>;
+				regulator-name = "NVCC_DRAM_1P1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+		};
+
+		i2c1c: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_soc_gpu_vpu: regulator@60 {
+				compatible = "fcs,fan53555";
+				reg = <0x60>;
+				regulator-name = "VDD_SOC_GPU_VPU";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+		};
+
+		i2c1d: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pgc_gpu {
+	power-supply = <&reg_soc_gpu_vpu>;
+};
+
+&pgc_vpu {
+	power-supply = <&reg_soc_gpu_vpu>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&reg_1p8v>;
+	vmmc-supply = <&reg_snvs>;
+	bus-width = <8>;
+	non-removable;
+	no-mmc-hs400;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0xd1
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0xd1
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x1
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x41
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000022
+		>;
+	};
+
+	pinctrl_i2c1_pca9546: i2c1-pca9546grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x49
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x45
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x45
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
new file mode 100644
index 0000000000..8614c18b59
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Boundary Devices
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX8MQ Nitrogen8M";
+	compatible = "boundary,imx8mq-nitrogen8m", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-power {
+			label = "Power Button";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&ddc_i2c_bus>;
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&lt8912_out>;
+			};
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_0v9: regulator-vref-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-0v9";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vref_2v5: regulator-vref-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vref_5v: regulator-vref-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&dphy {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+/* Release reset of the USB Host HUB */
+&gpio1 {
+	usb-host-reset-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
+		reg = <0x70>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1a: i2c1@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_arm_dram: regulator@60 {
+				compatible = "fcs,fan53555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_reg_arm_dram>;
+				reg = <0x60>;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		i2c1b: i2c1@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_dram_1p1v: regulator@60 {
+				compatible = "fcs,fan53555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_reg_dram_1p1v>;
+				reg = <0x60>;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				vsel-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		i2c1c: i2c1@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_soc_gpu_vpu: regulator@60 {
+				compatible = "fcs,fan53555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>;
+				reg = <0x60>;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		i2c1d: i2c1@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rtc@68 {
+				compatible = "microcrystal,rv4162";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1d_rv4162>;
+				reg = <0x68>;
+				interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
+				wakeup-source;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pca9546: i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c4@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+
+			hdmi-bridge@48 {
+				compatible = "lontium,lt8912b";
+				reg = <0x48> ;
+				reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						hdmi_out_in: endpoint {
+							data-lanes = <1 2 3 4>;
+							remote-endpoint = <&mipi_dsi_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						lt8912_out: endpoint {
+							remote-endpoint = <&hdmi_connector_in>;
+						};
+					};
+				};
+			};
+		};
+
+		ddc_i2c_bus: i2c4@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+
+			max7323: gpio-expander@68 {
+				compatible = "maxim,max7323";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7323>;
+				gpio-controller;
+				reg = <0x68>;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&hdmi_out_in>;
+			};
+		};
+	};
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb3_0>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb3_1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	vmmc-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* J17 connector, odd */
+			MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19	/* Pin 19 */
+			MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19	/* Pin 21 */
+			MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3		0x19	/* Pin 23 */
+			MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x19	/* Pin 25 */
+			MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x19	/* Pin 27 */
+			MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x19	/* Pin 29 */
+			MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x19	/* Pin 31 */
+			MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x19	/* Pin 33 */
+			MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x19	/* Pin 35 */
+			MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13		0x19	/* Pin 39 */
+			MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x19	/* Pin 41 */
+			MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x19	/* Pin 43 */
+			MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x19	/* Pin 45 */
+			MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19	/* Pin 47 */
+			MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19	/* Pin 49 */
+			MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19	/* Pin 51 */
+
+			/* J17 connector, even */
+			MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19	/* Pin 44 */
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19	/* Pin 48 */
+			MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19	/* Pin 50 */
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19	/* Pin 54 */
+			MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19	/* Pin 56 */
+
+			/* J18 connector, odd */
+			MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19	/* Pin 41 */
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19	/* Pin 43 */
+			MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19	/* Pin 45 */
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x19	/* Pin 47 */
+			MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18		0x19	/* Pin 49 */
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19	/* Pin 53 */
+
+			/* J18 connector, even */
+			MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0			0x19	/* Pin 32 */
+			MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x19	/* Pin 36 */
+			MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6		0x19	/* Pin 38 */
+			MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19	/* Pin 40 */
+			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8		0x19	/* Pin 42 */
+			MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9		0x19	/* Pin 44 */
+			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10		0x19	/* Pin 46 */
+
+			/* J13 Pin 2, WL_WAKE */
+			MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23		0xd6
+			/* J13 Pin 4, WL_IRQ, not needed for Silex */
+			MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21		0xd6
+			/* J13 pin 9, unused */
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			/* J13 Pin 41, BT_CLK_REQ */
+			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22		0xd6
+			/* J13 Pin 42, BT_HOST_WAKE */
+			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25		0xd6
+
+			/* Clock for both CSI1 and CSI2 */
+			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2	0x07
+			/* test points */
+			MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4		0xc1	/* TP87 */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x59
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+		>;
+	};
+
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c1_pca9546: i2c1-pca9546grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x49
+		>;
+	};
+
+	pinctrl_i2c1d_rv4162: i2c1d-rv4162grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x49
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_max7323: max7323grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19
+		>;
+	};
+
+	pinctrl_reg_arm_dram: reg-arm-dramgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x16
+		>;
+	};
+
+	pinctrl_reg_dram_1p1v: reg-dram-1p1vgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11	0x16
+		>;
+	};
+
+	pinctrl_reg_soc_gpu_vpu: reg-soc-gpu-vpugrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20		0x16
+		>;
+	};
+
+	pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x16
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x45
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x45
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x45
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x45
+		>;
+	};
+
+	pinctrl_usb3_0: usb3-0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x16
+		>;
+	};
+
+	pinctrl_usb3_1: usb3-1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x16
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x41
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+		MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
new file mode 100644
index 0000000000..a3b9d615a3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Google i.MX8MQ Phanbell";
+	compatible = "google,imx8mq-phanbell", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		status = "okay";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_alert0: trip0 {
+			temperature = <75000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_alert1: trip1 {
+			temperature = <80000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_crit0: trip3 {
+			temperature = <90000>;
+			hysteresis = <2000>;
+			type = "critical";
+		};
+
+		fan_toggle0: trip4 {
+			temperature = <65000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+			<&A53_0 0 1>; /* Exclude highest OPP */
+		};
+
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
+			<&A53_0 0 2>; /* Exclude two highest OPPs */
+		};
+
+		map4 {
+			trip = <&fan_toggle0>;
+			cooling-device = <&fan 0 1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
+		clocks = <&pmic_osc>;
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <900000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x16
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x85
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc5
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x85
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x87
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc7
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x87
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
new file mode 100644
index 0000000000..89cbec5c41
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Wandboard, Org.
+ * Copyright 2017 NXP
+ *
+ * Author: Richard Hu <hakahu@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TechNexion PICO-PI-8M";
+	compatible = "technexion,pico-pi-imx8m", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1 &pinctrl_enet_3v3>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		reg = <0x4b>;
+		compatible = "rohm,bd71837";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		clocks = <&pmic_osc>;
+		clock-names = "osc";
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <1000000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <1000000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet_3v3: enet3v3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO	0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_otg_vbus: otgvbusgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19   /* USB OTG VBUS Enable */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
+			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x85
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc5
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x85
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x87
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc7
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x87
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h
new file mode 100644
index 0000000000..68e8fa1729
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h
@@ -0,0 +1,623 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef __DTS_IMX8MQ_PINFUNC_H
+#define __DTS_IMX8MQ_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MQ_IOMUXC_PMIC_STBY_REQ_CCMSRCGPCMIX_PMIC_STBY_REQ               0x014 0x27C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_PMIC_ON_REQ_SNVSMIX_PMIC_ON_REQ                        0x018 0x280 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ONOFF_SNVSMIX_ONOFF                                    0x01C 0x284 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_POR_B_SNVSMIX_POR_B                                    0x020 0x288 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_RTC_RESET_B_SNVSMIX_RTC_RESET_B                        0x024 0x28C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0                                   0x028 0x290 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT          0x028 0x290 0x4C0 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K                          0x028 0x290 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1                       0x028 0x290 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_SJC_FAIL                                    0x028 0x290 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1                                   0x02C 0x294 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT                                    0x02C 0x294 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M                          0x02C 0x294 0x4BC 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2                       0x02C 0x294 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_SJC_ACTIVE                                  0x02C 0x294 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_GPIO1_IO2                                   0x030 0x298 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B                                0x030 0x298 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY                              0x030 0x298 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_SJC_DE_B                                    0x030 0x298 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3                                   0x034 0x29C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_USDHC1_VSELECT                              0x034 0x29C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0                            0x034 0x29C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK                              0x034 0x29C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_SJC_DONE                                    0x034 0x29C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4                                   0x038 0x2A0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT                              0x038 0x2A0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1                            0x038 0x2A0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV                           0x038 0x2A0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG                            0x038 0x2A0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5                                   0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_M4_NMI                                      0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY                     0x03C 0x2A4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT                       0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG                            0x03C 0x2A4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6                                   0x040 0x2A8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_ENET1_MDC                                   0x040 0x2A8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_USDHC1_CD_B                                 0x040 0x2A8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3                       0x040 0x2A8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG                            0x040 0x2A8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7                                   0x044 0x2AC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_ENET1_MDIO                                  0x044 0x2AC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_USDHC1_WP                                   0x044 0x2AC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4                       0x044 0x2AC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG                            0x044 0x2AC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8                                   0x048 0x2B0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN                        0x048 0x2B0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_USDHC2_RESET_B                              0x048 0x2B0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT                           0x048 0x2B0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG                              0x048 0x2B0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9                                   0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT                       0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0                            0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP                           0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG                           0x04C 0x2B4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10                                  0x050 0x2B8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO10_USB1_OTG_ID                                 0x050 0x2B8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED             0x050 0x2B8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11                                  0x054 0x2BC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_USB2_OTG_ID                                 0x054 0x2BC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY                     0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MQ_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0                           0x054 0x2BC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS                    0x054 0x2BC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12                                  0x058 0x2C0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR                                0x058 0x2C0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1                            0x058 0x2C0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1                           0x058 0x2C0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0                          0x058 0x2C0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13                                  0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC                                 0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT                                    0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2                           0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1                          0x05C 0x2C4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14                                  0x060 0x2C8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_USB2_OTG_PWR                                0x060 0x2C8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT                                    0x060 0x2C8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1                          0x060 0x2C8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2                          0x060 0x2C8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15                                  0x064 0x2CC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_USB2_OTG_OC                                 0x064 0x2CC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT                                    0x064 0x2CC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2                          0x064 0x2CC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB                             0x064 0x2CC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC                                     0x068 0x2D0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16                                    0x068 0x2D0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO                                   0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17                                   0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3                               0x070 0x2D8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD3_GPIO1_IO18                                    0x070 0x2D8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2                               0x074 0x2DC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK                                  0x074 0x2DC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ENET_TD2_GPIO1_IO19                                    0x074 0x2DC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1                               0x078 0x2E0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20                                    0x078 0x2E0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0                               0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD0_GPIO1_IO21                                    0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL                         0x080 0x2E8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TX_CTL_GPIO1_IO22                                 0x080 0x2E8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC                               0x084 0x2EC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TXC_ENET1_TX_ER                                   0x084 0x2EC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ENET_TXC_GPIO1_IO23                                    0x084 0x2EC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL                         0x088 0x2F0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24                                 0x088 0x2F0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC                               0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER                                   0x08C 0x2F4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25                                    0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0                               0x090 0x2F8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD0_GPIO1_IO26                                    0x090 0x2F8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1                               0x094 0x2FC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27                                    0x094 0x2FC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2                               0x098 0x300 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28                                    0x098 0x300 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3                               0x09C 0x304 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29                                    0x09C 0x304 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                                     0x0A0 0x308 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_CLK_GPIO2_IO0                                      0x0A0 0x308 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA2_GPIO2_IO4                                    0x0B0 0x318 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3                                 0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA3_GPIO2_IO5                                    0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4                                 0x0B8 0x320 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA4_GPIO2_IO6                                    0x0B8 0x320 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5                                 0x0BC 0x324 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA5_GPIO2_IO7                                    0x0BC 0x324 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6                                 0x0C0 0x328 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA6_GPIO2_IO8                                    0x0C0 0x328 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7                                 0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA7_GPIO2_IO9                                    0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B                             0x0C8 0x330 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10                                 0x0C8 0x330 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE                               0x0CC 0x334 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11                                  0x0CC 0x334 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B                                   0x0D0 0x338 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12                                    0x0D0 0x338 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK                                     0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_GPIO2_IO13                                     0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0                          0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0                               0x0D4 0x33C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD                                     0x0D8 0x340 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_GPIO2_IO14                                     0x0D8 0x340 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1                          0x0D8 0x340 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1                               0x0D8 0x340 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0                                 0x0DC 0x344 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_GPIO2_IO15                                   0x0DC 0x344 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2                        0x0DC 0x344 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2                             0x0DC 0x344 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1                                 0x0E0 0x348 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_GPIO2_IO16                                   0x0E0 0x348 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT                            0x0E0 0x348 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3                             0x0E0 0x348 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2                                 0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_GPIO2_IO17                                   0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP                            0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4                             0x0E4 0x34C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3                                 0x0E8 0x350 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA3_GPIO2_IO18                                   0x0E8 0x350 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET                     0x0E8 0x350 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B                             0x0EC 0x354 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19                                 0x0EC 0x354 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET                  0x0EC 0x354 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_WP_USDHC2_WP                                       0x0F0 0x358 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20                                      0x0F0 0x358 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_WP_SIM_M_HMASTLOCK                                 0x0F0 0x358 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_RAWNAND_ALE                                   0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK                                   0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0                                     0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_SIM_M_HPROT0                                  0x0F4 0x35C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B                               0x0F8 0x360 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B                                0x0F8 0x360 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1                                   0x0F8 0x360 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_SIM_M_HPROT1                                0x0F8 0x360 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B                               0x0FC 0x364 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B                                0x0FC 0x364 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2                                   0x0FC 0x364 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_SIM_M_HPROT2                                0x0FC 0x364 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B                               0x100 0x368 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B                                0x100 0x368 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3                                   0x100 0x368 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_SIM_M_HPROT3                                0x100 0x368 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B                               0x104 0x36C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B                                0x104 0x36C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4                                   0x104 0x36C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_SIM_M_HADDR0                                0x104 0x36C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_RAWNAND_CLE                                   0x108 0x370 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_QSPI_B_SCLK                                   0x108 0x370 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5                                     0x108 0x370 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_SIM_M_HADDR1                                  0x108 0x370 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_RAWNAND_DATA00                             0x10C 0x374 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0                               0x10C 0x374 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6                                  0x10C 0x374 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_SIM_M_HADDR2                               0x10C 0x374 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_RAWNAND_DATA01                             0x110 0x378 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1                               0x110 0x378 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7                                  0x110 0x378 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_SIM_M_HADDR3                               0x110 0x378 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_RAWNAND_DATA02                             0x114 0x37C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2                               0x114 0x37C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8                                  0x114 0x37C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_SIM_M_HADDR4                               0x114 0x37C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_RAWNAND_DATA03                             0x118 0x380 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3                               0x118 0x380 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9                                  0x118 0x380 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_SIM_M_HADDR5                               0x118 0x380 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_RAWNAND_DATA04                             0x11C 0x384 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_QSPI_B_DATA0                               0x11C 0x384 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10                                 0x11C 0x384 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_SIM_M_HADDR6                               0x11C 0x384 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_RAWNAND_DATA05                             0x120 0x388 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_QSPI_B_DATA1                               0x120 0x388 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11                                 0x120 0x388 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_SIM_M_HADDR7                               0x120 0x388 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_RAWNAND_DATA06                             0x124 0x38C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_QSPI_B_DATA2                               0x124 0x38C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12                                 0x124 0x38C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_SIM_M_HADDR8                               0x124 0x38C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_RAWNAND_DATA07                             0x128 0x390 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_QSPI_B_DATA3                               0x128 0x390 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13                                 0x128 0x390 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_SIM_M_HADDR9                               0x128 0x390 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_RAWNAND_DQS                                   0x12C 0x394 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_QSPI_A_DQS                                    0x12C 0x394 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14                                    0x12C 0x394 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_SIM_M_HADDR10                                 0x12C 0x394 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_RAWNAND_RE_B                                 0x130 0x398 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_QSPI_B_DQS                                   0x130 0x398 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15                                   0x130 0x398 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_SIM_M_HADDR11                                0x130 0x398 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_READY_B_RAWNAND_READY_B                           0x134 0x39C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16                                0x134 0x39C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_READY_B_SIM_M_HADDR12                             0x134 0x39C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                 0x138 0x3A0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17                                   0x138 0x3A0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_WE_B_SIM_M_HADDR13                                0x138 0x3A0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_WP_B_RAWNAND_WP_B                                 0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18                                   0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_WP_B_SIM_M_HADDR14                                0x13C 0x3A4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC                                 0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0                                0x140 0x3A8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19                                   0x140 0x3A8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXC_SAI5_RX_BCLK                                  0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXC_SAI1_TX_DATA1                                 0x144 0x3AC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20                                    0x144 0x3AC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0                                0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2                                0x148 0x3B0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21                                   0x148 0x3B0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1                                0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3                                0x14C 0x3B4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC                                 0x14C 0x3B4 0x4CC 0x2 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC                                 0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22                                   0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2                                0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4                                0x150 0x3B8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC                                 0x150 0x3B8 0x4CC 0x2 0x1
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                 0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23                                   0x150 0x3B8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5                                0x154 0x3BC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC                                 0x154 0x3BC 0x4CC 0x2 0x2
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0                                0x154 0x3BC 0x000 0x3 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24                                   0x154 0x3BC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_SAI5_MCLK                                    0x158 0x3C0 0x52C 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK                                 0x158 0x3C0 0x4C8 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_SAI4_MCLK                                    0x158 0x3C0 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25                                   0x158 0x3C0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK                      0x158 0x3C0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC                                 0x15C 0x3C4 0x4C4 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC                                 0x15C 0x3C4 0x4E4 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK                          0x15C 0x3C4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0                                    0x15C 0x3C4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_SIM_M_HADDR15                                0x15C 0x3C4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_SAI1_RX_BCLK                                  0x160 0x3C8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_SAI5_RX_BCLK                                  0x160 0x3C8 0x4D0 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL                           0x160 0x3C8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1                                     0x160 0x3C8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_SIM_M_HADDR16                                 0x160 0x3C8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0                                0x164 0x3CC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0                                0x164 0x3CC 0x4D4 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0                             0x164 0x3CC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_GPIO4_IO2                                    0x164 0x3CC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0                       0x164 0x3CC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_SIM_M_HADDR17                                0x164 0x3CC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1                                0x168 0x3D0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1                                0x168 0x3D0 0x4D8 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1                             0x168 0x3D0 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3                                    0x168 0x3D0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1                       0x168 0x3D0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_SIM_M_HADDR18                                0x168 0x3D0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2                                0x16C 0x3D4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2                                0x16C 0x3D4 0x4DC 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2                             0x16C 0x3D4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4                                    0x16C 0x3D4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2                       0x16C 0x3D4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_SIM_M_HADDR19                                0x16C 0x3D4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3                                0x170 0x3D8 0x4E0 0x0 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3                                0x170 0x3D8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3                             0x170 0x3D8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5                                    0x170 0x3D8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3                       0x170 0x3D8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_SIM_M_HADDR20                                0x170 0x3D8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4                                0x174 0x3DC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK                                 0x174 0x3DC 0x51C 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK                                 0x174 0x3DC 0x510 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4                             0x174 0x3DC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6                                    0x174 0x3DC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4                       0x174 0x3DC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SIM_M_HADDR21                                0x174 0x3DC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5                                0x178 0x3E0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0                                0x178 0x3E0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0                                0x178 0x3E0 0x514 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC                                 0x178 0x3E0 0x4C4 0x3 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5                             0x178 0x3E0 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7                                    0x178 0x3E0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5                       0x178 0x3E0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SIM_M_HADDR22                                0x178 0x3E0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6                                0x17C 0x3E4 0x520 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC                                 0x17C 0x3E4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC                                 0x17C 0x3E4 0x518 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6                             0x17C 0x3E4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8                                    0x17C 0x3E4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6                       0x17C 0x3E4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SIM_M_HADDR23                                0x17C 0x3E4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7                                0x180 0x3E8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI6_MCLK                                    0x180 0x3E8 0x530 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC                                 0x180 0x3E8 0x4CC 0x2 0x4
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4                                0x180 0x3E8 0x000 0x3 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7                             0x180 0x3E8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9                                    0x180 0x3E8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7                       0x180 0x3E8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SIM_M_HADDR24                                0x180 0x3E8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC                                 0x184 0x3EC 0x4CC 0x0 0x3
+#define MX8MQ_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC                                 0x184 0x3EC 0x4EC 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO                             0x184 0x3EC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10                                   0x184 0x3EC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXFS_SIM_M_HADDR25                                0x184 0x3EC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXC_SAI1_TX_BCLK                                  0x188 0x3F0 0x4C8 0x0 0x1
+#define MX8MQ_IOMUXC_SAI1_TXC_SAI5_TX_BCLK                                  0x188 0x3F0 0x4E8 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI                              0x188 0x3F0 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXC_GPIO4_IO11                                    0x188 0x3F0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXC_SIM_M_HADDR26                                 0x188 0x3F0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0                                0x18C 0x3F4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0                                0x18C 0x3F4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8                             0x18C 0x3F4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_GPIO4_IO12                                   0x18C 0x3F4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8                       0x18C 0x3F4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_SIM_M_HADDR27                                0x18C 0x3F4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1                                0x190 0x3F8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1                                0x190 0x3F8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9                             0x190 0x3F8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13                                   0x190 0x3F8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9                       0x190 0x3F8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_SIM_M_HADDR28                                0x190 0x3F8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2                                0x194 0x3FC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2                                0x194 0x3FC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10                            0x194 0x3FC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14                                   0x194 0x3FC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10                      0x194 0x3FC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_SIM_M_HADDR29                                0x194 0x3FC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3                                0x198 0x400 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3                                0x198 0x400 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11                            0x198 0x400 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15                                   0x198 0x400 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11                      0x198 0x400 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_SIM_M_HADDR30                                0x198 0x400 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4                                0x19C 0x404 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK                                 0x19C 0x404 0x510 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK                                 0x19C 0x404 0x51C 0x2 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12                            0x19C 0x404 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16                                   0x19C 0x404 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12                      0x19C 0x404 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_SIM_M_HADDR31                                0x19C 0x404 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5                                0x1A0 0x408 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0                                0x1A0 0x408 0x514 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0                                0x1A0 0x408 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13                            0x1A0 0x408 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17                                   0x1A0 0x408 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13                      0x1A0 0x408 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_SIM_M_HBURST0                                0x1A0 0x408 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6                                0x1A4 0x40C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC                                 0x1A4 0x40C 0x518 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC                                 0x1A4 0x40C 0x520 0x2 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14                            0x1A4 0x40C 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18                                   0x1A4 0x40C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14                      0x1A4 0x40C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_SIM_M_HBURST1                                0x1A4 0x40C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7                                0x1A8 0x410 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_SAI6_MCLK                                    0x1A8 0x410 0x530 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15                            0x1A8 0x410 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19                                   0x1A8 0x410 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15                      0x1A8 0x410 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_SIM_M_HBURST2                                0x1A8 0x410 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_MCLK_SAI1_MCLK                                    0x1AC 0x414 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_MCLK_SAI5_MCLK                                    0x1AC 0x414 0x52C 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK                                 0x1AC 0x414 0x4C8 0x2 0x2
+#define MX8MQ_IOMUXC_SAI1_MCLK_GPIO4_IO20                                   0x1AC 0x414 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_MCLK_SIM_M_HRESP                                  0x1AC 0x414 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                 0x1B0 0x418 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21                                   0x1B0 0x418 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0                                 0x1B0 0x418 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                  0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                  0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22                                    0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_RXC_SIM_M_HSIZE1                                  0x1B4 0x41C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                0x1B8 0x420 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                0x1B8 0x420 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_GPIO4_IO23                                   0x1B8 0x420 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2                                 0x1B8 0x420 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                 0x1BC 0x424 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                0x1BC 0x424 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_GPIO4_IO24                                   0x1BC 0x424 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_SIM_M_HWRITE                                 0x1BC 0x424 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                  0x1C0 0x428 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_SAI5_TX_DATA2                                 0x1C0 0x428 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_GPIO4_IO25                                    0x1C0 0x428 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT                               0x1C0 0x428 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0                                0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3                                0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_GPIO4_IO26                                   0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_TPSMP_CLK                                    0x1C4 0x42C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK                                    0x1C8 0x430 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_MCLK_SAI5_MCLK                                    0x1C8 0x430 0x52C 0x1 0x2
+#define MX8MQ_IOMUXC_SAI2_MCLK_GPIO4_IO27                                   0x1C8 0x430 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR                              0x1C8 0x430 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC                                 0x1CC 0x434 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1                                0x1CC 0x434 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC                                 0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28                                   0x1CC 0x434 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0                                0x1CC 0x434 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_GPT1_CAPTURE2                                 0x1D0 0x438 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_GPT1_CLK                                     0x1D8 0x440 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_GPT1_COMPARE3                                 0x1E0 0x448 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_SAI5_RX_DATA3                                 0x1E0 0x448 0x4E0 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_TXD_GPIO5_IO1                                     0x1E0 0x448 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_TPSMP_HDATA3                                  0x1E0 0x448 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK                                    0x1E4 0x44C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT                                     0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_SAI5_MCLK                                    0x1E4 0x44C 0x52C 0x2 0x3
+#define MX8MQ_IOMUXC_SAI3_MCLK_GPIO5_IO2                                    0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_TPSMP_HDATA4                                 0x1E4 0x44C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT                                    0x1E8 0x450 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT                                      0x1E8 0x450 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3                                     0x1E8 0x450 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_TPSMP_HDATA5                                  0x1E8 0x450 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN                                     0x1EC 0x454 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT                                      0x1EC 0x454 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4                                     0x1EC 0x454 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_TPSMP_HDATA6                                  0x1EC 0x454 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                           0x1F0 0x458 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT                                 0x1F0 0x458 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5                                0x1F0 0x458 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7                             0x1F0 0x458 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK                                0x1F4 0x45C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX                               0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX                               0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6                                  0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8                               0x1F4 0x45C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI                                0x1F8 0x460 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX                               0x1F8 0x460 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX                               0x1F8 0x460 0x504 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_GPIO5_IO7                                  0x1F8 0x460 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9                               0x1F8 0x460 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO                                0x1FC 0x464 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B                            0x1FC 0x464 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B                            0x1FC 0x464 0x500 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_GPIO5_IO8                                  0x1FC 0x464 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10                              0x1FC 0x464 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_ECSPI1_SS0                                  0x200 0x468 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B                             0x200 0x468 0x500 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B                             0x200 0x468 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9                                   0x200 0x468 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11                               0x200 0x468 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK                                0x204 0x46C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX                               0x204 0x46C 0x50C 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX                               0x204 0x46C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10                                 0x204 0x46C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12                              0x204 0x46C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI                                0x208 0x470 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX                               0x208 0x470 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX                               0x208 0x470 0x50C 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_GPIO5_IO11                                 0x208 0x470 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13                              0x208 0x470 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO                                0x20C 0x474 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B                            0x20C 0x474 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B                            0x20C 0x474 0x508 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12                                 0x20C 0x474 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14                              0x20C 0x474 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0                                  0x210 0x478 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B                             0x210 0x478 0x508 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B                             0x210 0x478 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13                                  0x210 0x478 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15                               0x210 0x478 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL                                      0x214 0x47C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_ENET1_MDC                                     0x214 0x47C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14                                    0x214 0x47C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_TPSMP_HDATA16                                 0x214 0x47C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA                                      0x218 0x480 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C1_SDA_ENET1_MDIO                                    0x218 0x480 0x4C0 0x1 0x2
+#define MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15                                    0x218 0x480 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C1_SDA_TPSMP_HDATA17                                 0x218 0x480 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL                                      0x21C 0x484 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN                          0x21C 0x484 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16                                    0x21C 0x484 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_TPSMP_HDATA18                                 0x21C 0x484 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA                                      0x220 0x488 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT                         0x220 0x488 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17                                    0x220 0x488 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_TPSMP_HDATA19                                 0x220 0x488 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL                                      0x224 0x48C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_PWM4_OUT                                      0x224 0x48C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_GPT2_CLK                                      0x224 0x48C 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18                                    0x224 0x48C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_TPSMP_HDATA20                                 0x224 0x48C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA                                      0x228 0x490 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_PWM3_OUT                                      0x228 0x490 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_GPT3_CLK                                      0x228 0x490 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19                                    0x228 0x490 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_TPSMP_HDATA21                                 0x228 0x490 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL                                      0x22C 0x494 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_PWM2_OUT                                      0x22C 0x494 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B                                0x22C 0x494 0x524 0x2 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_GPIO5_IO20                                    0x22C 0x494 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_TPSMP_HDATA22                                 0x22C 0x494 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA                                      0x230 0x498 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_PWM1_OUT                                      0x230 0x498 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B                                0x230 0x498 0x528 0x2 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_GPIO5_IO21                                    0x230 0x498 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_TPSMP_HDATA23                                 0x230 0x498 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX                                 0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_UART1_DTE_TX                                 0x234 0x49C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_ECSPI3_SCLK                                  0x234 0x49C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX                                 0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_UART2_DTE_TX                                 0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_ECSPI3_MISO                                  0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_GPIO5_IO24                                   0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_TPSMP_HDATA26                                0x23C 0x4A4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX                                 0x240 0x4A8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_UART2_DTE_RX                                 0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MQ_IOMUXC_UART2_TXD_ECSPI3_SS0                                   0x240 0x4A8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_GPIO5_IO25                                   0x240 0x4A8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_TPSMP_HDATA27                                0x240 0x4A8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX                                 0x244 0x4AC 0x504 0x0 0x2
+#define MX8MQ_IOMUXC_UART3_RXD_UART3_DTE_TX                                 0x244 0x4AC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_UART1_DCE_CTS_B                              0x244 0x4AC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_UART1_DTE_RTS_B                              0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_GPIO5_IO26                                   0x244 0x4AC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_TPSMP_HDATA28                                0x244 0x4AC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX                                 0x248 0x4B0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_UART3_DTE_RX                                 0x248 0x4B0 0x504 0x0 0x3
+#define MX8MQ_IOMUXC_UART3_TXD_UART1_DCE_RTS_B                              0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MQ_IOMUXC_UART3_TXD_UART1_DTE_CTS_B                              0x248 0x4B0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_GPIO5_IO27                                   0x248 0x4B0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_TPSMP_HDATA29                                0x248 0x4B0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX                                 0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MQ_IOMUXC_UART4_RXD_UART4_DTE_TX                                 0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B                              0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_UART2_DTE_RTS_B                              0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B                               0x24C 0x4B4 0x524 0x2 0x1
+#define MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28                                   0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_TPSMP_HDATA30                                0x24C 0x4B4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX                                 0x250 0x4B8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_UART4_DTE_RX                                 0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B                              0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MQ_IOMUXC_UART4_TXD_UART2_DTE_CTS_B                              0x250 0x4B8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B                               0x250 0x4B8 0x528 0x2 0x1
+#define MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29                                   0x250 0x4B8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_TPSMP_HDATA31                                0x250 0x4B8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_TEST_MODE                                              0x000 0x254 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_BOOT_MODE0                                             0x000 0x258 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_BOOT_MODE1                                             0x000 0x25C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_MOD                                               0x000 0x260 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TRST_B                                            0x000 0x264 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TDI                                               0x000 0x268 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TMS                                               0x000 0x26C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TCK                                               0x000 0x270 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TDO                                               0x000 0x274 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_RTC                                                    0x000 0x278 0x000 0x0 0x0
+
+#endif /* __DTS_IMX8MQ_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
new file mode 100644
index 0000000000..efc00f4abe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com>
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <2000>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c01";
+		reg = <0x50>;
+		status = "okay";
+	};
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	/* SPI flash; not assembled by default */
+	spi_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		status = "disabled";
+	};
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	assigned-clock-rates = <25000000>;
+	status = "okay";
+};
+
+&uart4 { /* ublox BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	assigned-clock-rates = <80000000>;
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO	0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x74
+			MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x16
+			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x16
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+			MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX		0x49
+			MX8MQ_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
new file mode 100644
index 0000000000..6e6182709d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Einfochips i.MX8MQ Thor96";
+	compatible = "einfochips,imx8mq-thor96", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		user-led1 {
+			label = "green:user1";
+			gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user-led2 {
+			label = "green:user2";
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		user-led3 {
+			label = "green:user3";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		user-led4 {
+			label = "green:user4";
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan-active-led {
+			label = "yellow:wlan";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt-active-led {
+			label = "blue:bt";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	reg_usdhc1_vmmc: reg-usdhc1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc1_vqmmc: reg-usdhc1-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_EXT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: reg-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vqmmc: reg-usdhc2-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "NVCC_SD2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reg_on>;
+		gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* LS-SPI0 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* LS-I2C0 */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+/* LS-I2C1 */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+/* HS-I2C2 */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* HS-I2C3 */
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+/* Debug UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+/* LS-UART0 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		device-wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_gpios>;
+	};
+};
+
+/* LS-UART1 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO */
+&usdhc1 {
+	#address-cells = <0x1>;
+	#size-cells = <0x0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_usdhc1_vmmc>;
+	vqmmc-supply = <&reg_usdhc1_vqmmc>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	no-sd;
+	no-mmc;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bt_gpios: btgpiosgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x16
+			MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x16
+			MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x16
+			MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x16
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x4
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x24
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1c
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1c
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1c
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1c
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1c
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1c
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21		0x19
+			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
+			MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19
+			MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
+			MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
+			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8c
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcc
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcc
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcc
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcc
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcc
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9c
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdc
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdc
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdc
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdc
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdc
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xcc
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wifi_reg_on: wifiregongrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x17059
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
new file mode 100644
index 0000000000..0d8def2766
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2019-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mq-tqma8mq.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
+	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+
+	aliases {
+		eeprom0 = &eeprom3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	extcon_usbotg: extcon-usbotg0 {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie1_refclk: pcie1-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regotgvbus>;
+		regulator-name = "MBA8MQ_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&btn2 {
+	gpios = <&gpio3 17 GPIO_ACTIVE_LOW>;
+};
+
+&gpio_leds {
+	led3 {
+		label = "led3";
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	expander2: gpio@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mpcie-rst-hog {
+			gpio-hog;
+			gpios = <13 0>;
+			output-high;
+			line-name = "MPCIE_RST#";
+		};
+	};
+};
+
+&irqsteer {
+	status = "okay";
+};
+
+&led2 {
+	gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie0 {
+	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	status = "okay";
+};
+
+/*
+ * miniPCIe, also usable for cards with USB. Therefore configure the reset as
+ * static gpio hog.
+ */
+&pcie1 {
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie1_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_SAI3_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
+		<&clk IMX8MQ_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+	clock-names = "mclk";
+	clocks = <&clk IMX8MQ_CLK_SAI3_ROOT>;
+};
+
+&uart1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+};
+
+&uart2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+};
+
+/* console */
+&uart3 {
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_otg_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* we implement dual role but not full featured OTG */
+	extcon = <&extcon_usbotg>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x0000004e>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x0000004e>;
+	};
+
+	pinctrl_expander: expandergrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0xd6>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
+			   <MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23>,
+			   <MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91>,
+			   <MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
+			   <MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x41>,
+			   <MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x41>,
+			   <MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17		0x41>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x41>,
+			   <MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x41>,
+			   <MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16	0x41>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000067>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17		0x40000067>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000067>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19		0x40000067>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT		0x16>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT		0x16>;
+	};
+
+	pinctrl_regotgvbus: reggotgvbusgrp {
+		/* USB1 OTG PWR as GPIO */
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x06>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0xc1>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x79>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x79>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x79>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX		0x79>;
+	};
+
+	pinctrl_usbcon0: usb0congrp {
+		/* ID: floating / high: device, low: host -> use PU */
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10		0xe6>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83>,
+			   <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3>,
+			   <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x85>,
+			   <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5>,
+			   <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f>,
+			   <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7>,
+			   <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
new file mode 100644
index 0000000000..5ca6b22525
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2019-2021 TQ-Systems GmbH
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ";
+	compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MX_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MX_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_arm: regulator-vdd-arm {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvfs>;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-name = "TQMa8Mx_DVFS";
+		regulator-type = "voltage";
+		regulator-settling-time-us = <150000>;
+		gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		states = <900000 0x1 1000000 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pfuze-support-disable-sw;
+		reg = <0x8>;
+
+		regulators {
+			/* VDD_GPU */
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			/* VDD_VPU */
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			/* NVCC_DRAM */
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			/* VDD_DRAM */
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			/* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */
+			nvcc_1v8_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* VDD_PHY_0V9 */
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_1V8 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			/* VDDA_1V8 */
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_3V3 */
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		quartz-load-femtofarads = <7000>;
+
+		clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&pcie0 {
+	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
+	vph-supply = <&vgen5_reg>;
+};
+
+&pcie1 {
+	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
+	vph-supply = <&vgen5_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	assigned-clocks = <&clk IMX8MQ_CLK_QSPI>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+/* Attention: wdog reset forcing POR needs baseboard support */
+&wdog1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dvfs: dvfsgrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x16>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x4000007f>,
+			   <MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x4000007f>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14		0x40000074>,
+			   <MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15		0x40000074>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x97>,
+			   <MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82>,
+			   <MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x97>,
+			   <MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x97>,
+			   <MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x97>,
+			   <MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x97>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x41>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x83>,
+			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x83>,
+			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x85>,
+			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x85>,
+			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x87>,
+			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x87>,
+			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
new file mode 100644
index 0000000000..be1e7d6f0e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx8mq-zii-ultra.dtsi"
+
+/ {
+	model = "ZII Ultra RMB3 Board";
+	compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
+
+	sound1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "front";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound1_codec>;
+		simple-audio-card,frame-master = <&sound1_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack Front";
+		simple-audio-card,routing =
+			"Headphone Jack Front", "HPA1 HPLEFT",
+			"Headphone Jack Front", "HPA1 HPRIGHT",
+			"HPA1 LEFTIN", "HPL",
+			"HPA1 RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa1>;
+
+		sound1_cpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		sound1_codec: simple-audio-card,codec {
+			sound-dai = <&codec1>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	sound2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "periph";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound2_codec>;
+		simple-audio-card,frame-master = <&sound2_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack Back";
+		simple-audio-card,routing =
+			"Headphone Jack Back", "HPA1 HPLEFT",
+			"Headphone Jack Back", "HPA1 HPRIGHT",
+			"HPA1 LEFTIN", "HPL",
+			"HPA1 RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa2>;
+
+		sound2_cpu: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		sound2_codec: simple-audio-card,codec {
+			sound-dai = <&codec2>;
+			clocks = <&cs2000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nor_flash: flash@0 {
+		compatible = "st,n25q128a13", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&hpa2 {
+	sound-name-prefix = "HPA1";
+};
+
+&i2c1 {
+	codec2: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec2>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_gen_3p3>;
+		SPRVDD-supply = <&reg_gen_3p3>;
+		SPLVDD-supply = <&reg_gen_3p3>;
+		AVDD-supply = <&reg_gen_3p3>;
+		IOVDD-supply = <&reg_gen_3p3>;
+		DVDD-supply = <&vgen4_reg>;
+		reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	temp-sense@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+};
+
+&i2c4 {
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <2>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+			syna,delta-x-threshold = <5>;
+			syna,delta-y-threshold = <10>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+		};
+	};
+
+	touchscreen@2a {
+		compatible = "eeti,exc3000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x2a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+		status = "disabled";
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	status = "okay";
+};
+
+&usbhub {
+	swap-dx-lanes = <0>;
+};
+
+&iomuxc {
+	pinctrl_codec2: dac2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x41
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x19
+			MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+			MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6
+			MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6
+			MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
new file mode 100644
index 0000000000..f6130167a1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx8mq-zii-ultra.dtsi"
+
+/ {
+	model = "ZII Ultra Zest Board";
+	compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq";
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "front";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack Front",
+			"Headphone", "Headphone Jack Back";
+		simple-audio-card,routing =
+			"Headphone Jack Front", "HPA1 HPLEFT",
+			"Headphone Jack Front", "HPA1 HPRIGHT",
+			"Headphone Jack Back", "HPA2 HPLEFT",
+			"Headphone Jack Back", "HPA2 HPRIGHT",
+			"HPA1 LEFTIN", "HPL",
+			"HPA1 RIGHTIN", "HPR",
+			"HPA2 LEFTIN", "HPL",
+			"HPA2 RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa1>, <&hpa2>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&codec1>;
+			clocks = <&cs2000>;
+		};
+	};
+};
+
+&i2c4 {
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
new file mode 100644
index 0000000000..cb777b47ba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -0,0 +1,862 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+	aliases {
+		mdio-gpio0 = &mdio0;
+		rtc0 = &ds1341;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	mdio0: bitbang-mdio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>;
+		gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio1 14 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pcie0_refclk: clock-pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie1_refclk: clock-pcie1-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_12p0_main: regulator-12p0-main {
+		compatible = "regulator-fixed";
+		regulator-name = "12V_MAIN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_5p0_main: regulator-5p0-main {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0_main>;
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3_main: regulator-3p3-main {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0_main>;
+		regulator-name = "3V3_MAIN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_gen_3p3: regulator-gen-3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_3p3_main>;
+		regulator-name = "GEN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_gen_3p3>;
+		regulator-name = "3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_arm: regulator-arm {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_arm>;
+		compatible = "regulator-gpio";
+		vin-supply = <&reg_12p0_main>;
+		regulator-name = "0V9_ARM";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1000000>;
+		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		states = <1000000 0x1
+		           900000 0x0>;
+		regulator-always-on;
+	};
+
+	cs2000_ref: cs2000-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	cs2000_in_dummy: cs2000-in-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch: switch@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-0 = <&pinctrl_switch_irq>;
+			pinctrl-names = "default";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "gigabit_proc";
+					phy-handle = <&switchphy0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "netaux";
+					phy-handle = <&switchphy1>;
+				};
+
+				port@2 {
+					reg = <2>;
+					phy-mode = "rev-rmii";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "netright";
+					phy-handle = <&switchphy3>;
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "netleft";
+					phy-handle = <&switchphy4>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switchphy0: switchphy@0 {
+					reg = <0>;
+					interrupt-parent = <&switch>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy1: switchphy@1 {
+					reg = <1>;
+					interrupt-parent = <&switch>;
+					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy2: switchphy@2 {
+					reg = <2>;
+					interrupt-parent = <&switch>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy3: switchphy@3 {
+					reg = <3>;
+					interrupt-parent = <&switch>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy4: switchphy@4 {
+					reg = <4>;
+					interrupt-parent = <&switch>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	usb-emulation-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "usb-emulation";
+	};
+
+	usb-mode1-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode1";
+	};
+
+	usb-pwr-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "usb-pwr-ctrl-en-n";
+	};
+
+	usb-mode2-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode2";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer@1c {
+		compatible = "fsl,mma8451";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x1c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT2";
+		vdd-supply = <&reg_gen_3p3>;
+		vddio-supply = <&reg_gen_3p3>;
+	};
+
+	ucs1002: charger@32 {
+		compatible = "microchip,ucs1002";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ucs1002>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <17 IRQ_TYPE_EDGE_BOTH>,
+		             <18 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "a_det", "alert";
+	};
+
+	hpa2: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa2>;
+		reg = <0x60>;
+		power-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0_main>;
+		sound-name-prefix = "HPA2";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	codec1: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec1>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_gen_3p3>;
+		SPRVDD-supply = <&reg_gen_3p3>;
+		SPLVDD-supply = <&reg_gen_3p3>;
+		AVDD-supply = <&reg_gen_3p3>;
+		IOVDD-supply = <&reg_gen_3p3>;
+		DVDD-supply = <&vgen4_reg>;
+		reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	hpa1: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa1>;
+		reg = <0x60>;
+		power-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0_main>;
+		sound-name-prefix = "HPA1";
+	};
+
+	ds1341: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	usbhub: usbhub@2c {
+		compatible = "microchip,usb2513b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhub>;
+		reg = <0x2c>;
+		reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	};
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+
+	cs2000: clkgen@4e {
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4e>;
+		#clock-cells = <0>;
+		clock-names = "clk_in", "ref_clk";
+		clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24000000>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usb3_phy0 {
+	vbus-supply = <&ucs1002>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_5p0_main>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+	         <&pcie0_refclk>,
+	         <&clk IMX8MQ_CLK_PCIE1_PHY>,
+	         <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	vph-supply = <&vgen5_reg>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+	         <&pcie1_refclk>,
+	         <&clk IMX8MQ_CLK_PCIE2_PHY>,
+	         <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	vph-supply = <&vgen5_reg>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&sw4_reg>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
+		>;
+	};
+
+	pinctrl_codec1: dac1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x41
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_fec1_phy_reset: fec1phyresetgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29		0x11
+		>;
+	};
+
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10		0x6
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x6
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x6
+			MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13		0x6
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x400000a2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x400000a2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x400000a2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x400000a2
+		>;
+	};
+
+	pinctrl_mdio_bitbang: bitbangmdiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x44
+			MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x64
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B		0x66
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x6
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B		0x66
+			MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x6
+		>;
+	};
+
+	pinctrl_reg_arm: regarmgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_switch_irq: switchgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x41
+		>;
+	};
+
+	pinctrl_tpa1: tpa6130-1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x41
+		>;
+	};
+
+	pinctrl_tpa2: tpa6130-2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x41
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x96
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x96
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_ucs1002: ucs1002grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17		0x41
+			MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18		0x41
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
new file mode 100644
index 0000000000..052ba9baa4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -0,0 +1,1876 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <dt-bindings/clock/imx8mq-clock.h>
+#include <dt-bindings/power/imx8mq-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/imx8mq.h>
+#include "imx8mq-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gpc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc_25m: clock-osc-25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc_25m";
+	};
+
+	osc_27m: clock-osc-27m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-output-names = "osc_27m";
+	};
+
+	hdmi_phy_27m: clock-hdmi-phy-27m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-output-names = "hdmi_phy_27m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <900000>;
+			/* Industrial only */
+			opp-supported-hw = <0xf>, <0x4>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <900000>;
+			/* Consumer only */
+			opp-supported-hw = <0xe>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0xc>, <0x4>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				gpu_alert: gpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				vpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+		             <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+		             <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+		             <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc: soc@0 {
+		compatible = "fsl,imx8mq-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+		nvmem-cells = <&imx8mq_uid>;
+		nvmem-cell-names = "soc_unique_id";
+
+		etm0: etm@28440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28440000 0x1000>;
+			cpu = <&A53_0>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@28540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28540000 0x1000>;
+			cpu = <&A53_1>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@28640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28640000 0x1000>;
+			cpu = <&A53_2>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@28740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28740000 0x1000>;
+			cpu = <&A53_3>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		funnel {
+			/*
+			 * non-configurable funnel don't show up on the AMBA
+			 * bus.  As such no need to add "arm,primecell".
+			 */
+			compatible = "arm,coresight-static-funnel";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ca_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm1_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ca_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm2_out_port>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					ca_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm3_out_port>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@28c03000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x28c03000 0x1000>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					hugo_funnel_in_port1: endpoint {
+					/* M4 input */
+					};
+				};
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf@28c04000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c04000 0x1000>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr@28c06000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c06000 0x1000>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
+		aips1: bus@30000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30000000 0x30000000 0x400000>;
+
+			sai1: sai@30010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
+				         <&clk IMX8MQ_CLK_SAI1_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
+				         <&clk IMX8MQ_CLK_SAI6_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30040000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30040000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
+				         <&clk IMX8MQ_CLK_SAI5_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai4: sai@30050000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
+				         <&clk IMX8MQ_CLK_SAI4_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 87 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mq-tmu";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
+				little-endian;
+				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+				fsl,tmu-calibration = <0x00000000 0x00000023>,
+						      <0x00000001 0x00000029>,
+						      <0x00000002 0x0000002f>,
+						      <0x00000003 0x00000035>,
+						      <0x00000004 0x0000003d>,
+						      <0x00000005 0x00000043>,
+						      <0x00000006 0x0000004b>,
+						      <0x00000007 0x00000051>,
+						      <0x00000008 0x00000057>,
+						      <0x00000009 0x0000005f>,
+						      <0x0000000a 0x00000067>,
+						      <0x0000000b 0x0000006f>,
+
+						      <0x00010000 0x0000001b>,
+						      <0x00010001 0x00000023>,
+						      <0x00010002 0x0000002b>,
+						      <0x00010003 0x00000033>,
+						      <0x00010004 0x0000003b>,
+						      <0x00010005 0x00000043>,
+						      <0x00010006 0x0000004b>,
+						      <0x00010007 0x00000055>,
+						      <0x00010008 0x0000005d>,
+						      <0x00010009 0x00000067>,
+						      <0x0001000a 0x00000070>,
+
+						      <0x00020000 0x00000017>,
+						      <0x00020001 0x00000023>,
+						      <0x00020002 0x0000002d>,
+						      <0x00020003 0x00000037>,
+						      <0x00020004 0x00000041>,
+						      <0x00020005 0x0000004b>,
+						      <0x00020006 0x00000057>,
+						      <0x00020007 0x00000063>,
+						      <0x00020008 0x0000006f>,
+
+						      <0x00030000 0x00000015>,
+						      <0x00030001 0x00000021>,
+						      <0x00030002 0x0000002d>,
+						      <0x00030003 0x00000039>,
+						      <0x00030004 0x00000045>,
+						      <0x00030005 0x00000053>,
+						      <0x00030006 0x0000005f>,
+						      <0x00030007 0x00000071>;
+				#thermal-sensor-cells = <1>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			lcdif: lcd-controller@30320000 {
+				compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x30320000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
+					 <&clk IMX8MQ_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MQ_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
+						  <&clk IMX8MQ_VIDEO_PLL1>,
+						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+				status = "disabled";
+
+				port {
+					lcdif_mipi_dsi: endpoint {
+						remote-endpoint = <&mipi_dsi_lcdif_in>;
+					};
+				};
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mq-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			iomuxc_gpr: syscon@30340000 {
+				compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd";
+				reg = <0x30340000 0x10000>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+					mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
+				};
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mq-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */
+					reg = <0x4 0x8>;
+				};
+
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
+					reg = <0x10 4>;
+				};
+
+				fec_mac_address: mac-address@90 { /* 0x640 */
+					reg = <0x90 6>;
+				};
+			};
+
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mq-anatop";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mq-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
+				         <&clk_ext1>, <&clk_ext2>,
+				         <&clk_ext3>, <&clk_ext4>;
+				clock-names = "ckil", "osc_25m", "osc_27m",
+				              "clk_ext1", "clk_ext2",
+				              "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>,
+						  <&clk IMX8MQ_CLK_A53_CORE>,
+						  <&clk IMX8MQ_CLK_NOC>,
+						  <&clk IMX8MQ_CLK_AUDIO_AHB>,
+						  <&clk IMX8MQ_AUDIO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_AUDIO_PLL2_BYPASS>,
+						  <&clk IMX8MQ_AUDIO_PLL1>,
+						  <&clk IMX8MQ_AUDIO_PLL2>;
+				assigned-clock-rates = <0>, <0>,
+						       <800000000>,
+						       <0>,
+						       <0>,
+						       <0>,
+						       <786432000>,
+						       <722534400>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>,
+							 <&clk IMX8MQ_ARM_PLL_OUT>,
+							 <0>,
+							 <&clk IMX8MQ_SYS2_PLL_500M>,
+							 <&clk IMX8MQ_AUDIO_PLL1>,
+							 <&clk IMX8MQ_AUDIO_PLL2>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mq-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_mipi: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI>;
+					};
+
+					/*
+					 * As per comment in ATF source code:
+					 *
+					 * PCIE1 and PCIE2 share the
+					 * same reset signal, if we
+					 * power down PCIE2, PCIE1
+					 * will be held in reset too.
+					 *
+					 * So instead of creating two
+					 * separate power domains for
+					 * PCIE1 and PCIE2 we create a
+					 * link between both and use
+					 * it as a shared PCIE power
+					 * domain.
+					 */
+					pgc_pcie: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_PCIE1>;
+						power-domains = <&pgc_pcie2>;
+					};
+
+					pgc_otg1: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
+					};
+
+					pgc_otg2: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
+					};
+
+					pgc_ddr1: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_DDR1>;
+					};
+
+					pgc_gpu: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_GPU>;
+						clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+						         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+							 <&clk IMX8MQ_CLK_GPU_AXI>,
+						         <&clk IMX8MQ_CLK_GPU_AHB>;
+					};
+
+					pgc_vpu: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_VPU>;
+						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
+							 <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+							 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+						assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
+								  <&clk IMX8MQ_CLK_VPU_G2>,
+								  <&clk IMX8MQ_CLK_VPU_BUS>,
+								  <&clk IMX8MQ_VPU_PLL_BYPASS>;
+						assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
+									 <&clk IMX8MQ_VPU_PLL_OUT>,
+									 <&clk IMX8MQ_SYS1_PLL_800M>,
+									 <&clk IMX8MQ_VPU_PLL>;
+						assigned-clock-rates = <600000000>,
+								       <300000000>,
+								       <800000000>,
+								       <0>;
+					};
+
+					pgc_disp: power-domain@7 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_DISP>;
+					};
+
+					pgc_mipi_csi1: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
+					};
+
+					pgc_mipi_csi2: power-domain@9 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
+					};
+
+					pgc_pcie2: power-domain@a {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_PCIE2>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30400000 0x30400000 0x400000>;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_25m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 { /* AIPS3 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30800000 0x30800000 0x400000>,
+				 <0x08000000 0x08000000 0x10000000>;
+
+			spdif1: spdif@30810000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x30810000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
+					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
+					<&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
+					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
+					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi1: spi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
+				         <&clk IMX8MQ_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
+				         <&clk IMX8MQ_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
+				         <&clk IMX8MQ_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			spdif2: spdif@308a0000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x308a0000 0x10000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
+					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
+					<&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
+					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
+					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+					 <&clk IMX8MQ_CLK_SAI2_ROOT>,
+					 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@308c0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
+				         <&clk IMX8MQ_CLK_SAI3_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_AHB>,
+					 <&clk IMX8MQ_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			mipi_dsi: dsi@30a00000 {
+				compatible = "fsl,imx8mq-nwl-dsi";
+				reg = <0x30a00000 0x300>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+					 <&clk IMX8MQ_CLK_DSI_AHB>,
+					 <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+					 <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+					 <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+				clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+				assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
+						  <&clk IMX8MQ_CLK_DSI_CORE>,
+						  <&clk IMX8MQ_CLK_DSI_IPG_DIV>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
+							 <&clk IMX8MQ_SYS1_PLL_266M>;
+				assigned-clock-rates = <80000000>, <266000000>, <20000000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				mux-controls = <&mux 0>;
+				power-domains = <&pgc_mipi>;
+				phys = <&dphy>;
+				phy-names = "dphy";
+				resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+					 <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+					 <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+					 <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+				reset-names = "byte", "dpi", "esc", "pclk";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						mipi_dsi_lcdif_in: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&lcdif_mipi_dsi>;
+						};
+					};
+				};
+			};
+
+			dphy: dphy@30a00300 {
+				compatible = "fsl,imx8mq-mipi-dphy";
+				reg = <0x30a00300 0x100>;
+				clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+				clock-names = "phy_ref";
+				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+						  <&clk IMX8MQ_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
+						  <&clk IMX8MQ_VIDEO_PLL1>,
+						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <0>, <0>, <24000000>, <594000000>;
+				#phy-cells = <0>;
+				power-domains = <&pgc_mipi>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
+				         <&clk IMX8MQ_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mipi_csi1: csi@30a70000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30a70000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				   <&clk IMX8MQ_CLK_CSI1_ESC>,
+				   <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				    <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI1_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi1>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+				interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+
+						csi1_mipi_ep: endpoint {
+							remote-endpoint = <&csi1_ep>;
+						};
+					};
+				};
+			};
+
+			csi1: csi@30a90000 {
+				compatible = "fsl,imx8mq-csi";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi1_ep: endpoint {
+						remote-endpoint = <&csi1_mipi_ep>;
+					};
+				};
+			};
+
+			mipi_csi2: csi@30b60000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30b60000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				   <&clk IMX8MQ_CLK_CSI2_ESC>,
+				   <&clk IMX8MQ_CLK_CSI2_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI2_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi2>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>;
+				interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+
+						csi2_mipi_ep: endpoint {
+							remote-endpoint = <&csi2_ep>;
+						};
+					};
+				};
+			};
+
+			csi2: csi@30b80000 {
+				compatible = "fsl,imx8mq-csi";
+				reg = <0x30b80000 0x10000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi2_ep: endpoint {
+						remote-endpoint = <&csi2_mipi_ep>;
+					};
+				};
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mq-usdhc",
+				             "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
+				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mq-usdhc",
+				             "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
+				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			qspi0: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
+				reg = <0x30bb0000 0x10000>,
+				      <0x08000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
+					 <&clk IMX8MQ_CLK_QSPI_ROOT>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MQ_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
+				         <&clk IMX8MQ_CLK_ENET1_ROOT>,
+				         <&clk IMX8MQ_CLK_ENET_TIMER>,
+				         <&clk IMX8MQ_CLK_ENET_REF>,
+				         <&clk IMX8MQ_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+				              "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>,
+						  <&clk IMX8MQ_CLK_ENET_TIMER>,
+						  <&clk IMX8MQ_CLK_ENET_REF>,
+						  <&clk IMX8MQ_CLK_ENET_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+							 <&clk IMX8MQ_SYS2_PLL_100M>,
+							 <&clk IMX8MQ_SYS2_PLL_125M>,
+							 <&clk IMX8MQ_SYS2_PLL_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&fec_mac_address>;
+				nvmem-cell-names = "mac-address";
+				fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
+				status = "disabled";
+			};
+		};
+
+		noc: interconnect@32700000 {
+			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MQ_CLK_NOC>;
+			fsl,ddrc = <&ddrc>;
+			#interconnect-cells = <1>;
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133000000 {
+					opp-hz = /bits/ 64 <133333333>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+				};
+			};
+		};
+
+		aips4: bus@32c00000 { /* AIPS4 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x32c00000 0x32c00000 0x400000>;
+
+			irqsteer: interrupt-controller@32e2d000 {
+				compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x32e2d000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+				clock-names = "ipg";
+				fsl,channel = <0>;
+				fsl,num-irqs = <64>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gpu: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x40000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+			         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+			         <&clk IMX8MQ_CLK_GPU_AXI>,
+			         <&clk IMX8MQ_CLK_GPU_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
+			assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
+			                  <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
+			                  <&clk IMX8MQ_CLK_GPU_AXI>,
+			                  <&clk IMX8MQ_CLK_GPU_AHB>,
+			                  <&clk IMX8MQ_GPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL>;
+			assigned-clock-rates = <800000000>, <800000000>,
+			                       <800000000>, <800000000>, <0>;
+			power-domains = <&pgc_gpu>;
+		};
+
+		usb_dwc3_0: usb@38100000 {
+			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+			reg = <0x38100000 0x10000>;
+			clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
+			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
+				 <&clk IMX8MQ_CLK_32K>;
+			clock-names = "bus_early", "ref", "suspend";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+			                         <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <500000000>, <100000000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy0>, <&usb3_phy0>;
+			phy-names = "usb2-phy", "usb3-phy";
+			power-domains = <&pgc_otg1>;
+			snps,parkmode-disable-ss-quirk;
+			status = "disabled";
+		};
+
+		usb3_phy0: usb-phy@381f0040 {
+			compatible = "fsl,imx8mq-usb-phy";
+			reg = <0x381f0040 0x40>;
+			clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <100000000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb_dwc3_1: usb@38200000 {
+			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+			reg = <0x38200000 0x10000>;
+			clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
+			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
+				 <&clk IMX8MQ_CLK_32K>;
+			clock-names = "bus_early", "ref", "suspend";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+			                         <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <500000000>, <100000000>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy1>, <&usb3_phy1>;
+			phy-names = "usb2-phy", "usb3-phy";
+			power-domains = <&pgc_otg2>;
+			snps,parkmode-disable-ss-quirk;
+			status = "disabled";
+		};
+
+		usb3_phy1: usb-phy@382f0040 {
+			compatible = "fsl,imx8mq-usb-phy";
+			reg = <0x382f0040 0x40>;
+			clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <100000000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mq-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
+		};
+
+		vpu_blk_ctrl: blk-ctrl@38320000 {
+			compatible = "fsl,imx8mq-vpu-blk-ctrl";
+			reg = <0x38320000 0x100>;
+			power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
+			power-domain-names = "bus", "g1", "g2";
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+			clock-names = "g1", "g2";
+			#power-domain-cells = <1>;
+		};
+
+		pcie0: pcie@33800000 {
+			compatible = "fsl,imx8mq-pcie";
+			reg = <0x33800000 0x400000>,
+			      <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY>,
+			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
+			status = "disabled";
+		};
+
+		pcie1: pcie@33c00000 {
+			compatible = "fsl,imx8mq-pcie";
+			reg = <0x33c00000 0x400000>,
+			      <0x27f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			linux,pci-domain = <1>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
+			status = "disabled";
+		};
+
+		pcie1_ep: pcie-ep@33c00000 {
+			compatible = "fsl,imx8mq-pcie-ep";
+			reg = <0x33c00000 0x000400000>,
+			      <0x20000000 0x08000000>;
+			reg-names = "dbi", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			fsl,max-link-speed = <2>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+						 <&clk IMX8MQ_SYS2_PLL_100M>,
+						 <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+					       <10000000>;
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,	/* GIC Dist */
+			      <0x38880000 0xc0000>,	/* GICR */
+			      <0x31000000 0x2000>,	/* GICC */
+			      <0x31010000 0x2000>,	/* GICV */
+			      <0x31020000 0x2000>;	/* GICH */
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
+				 <&clk IMX8MQ_DRAM_PLL_OUT>,
+				 <&clk IMX8MQ_CLK_DRAM_ALT>,
+				 <&clk IMX8MQ_CLK_DRAM_APB>;
+			status = "disabled";
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
new file mode 100644
index 0000000000..5ab0921eb5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board";
+	compatible = "toradex,apalis-imx8-eval",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
new file mode 100644
index 0000000000..68ce58dc71
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-ixora-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Ixora V1.1 Carrier Board";
+	compatible = "toradex,apalis-imx8-ixora-v1.1",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
new file mode 100644
index 0000000000..c8ff758315
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-imx8-v1.1-eval",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
new file mode 100644
index 0000000000..ad7f644968
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.1 Carrier Board";
+	compatible = "toradex,apalis-imx8-v1.1-ixora-v1.1",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
new file mode 100644
index 0000000000..3b2e8c93b8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.2 Carrier Board";
+	compatible = "toradex,apalis-imx8-v1.1-ixora-v1.2",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
new file mode 100644
index 0000000000..81ba8b2831
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8qm.dtsi"
+#include "imx8-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1";
+	compatible = "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
+
+/* TODO: Cooling Maps */
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
new file mode 100644
index 0000000000..1c6af9f549
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx8qm-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM";
+	compatible = "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
+
+&ethphy0 {
+	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+};
+
+/*
+ * Apalis iMX8QM V1.0 has PHY KSZ9031. the Micrel PHY driver
+ * doesn't support setting internal PHY delay for TXC line for
+ * this PHY model. Use delay on MAC side instead.
+ */
+&fec1 {
+	fsl,rgmii_txc_dly;
+	phy-mode = "rgmii-rxid";
+};
+
+/* TODO: Apalis HDMI1 */
+
+/* Apalis I2C2 (DDC) */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_135",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_275",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_124",
+			  "MXM3_122",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "",
+			  "",
+			  "MXM3_4",
+			  "MXM3_211",
+			  "MXM3_209",
+			  "MXM3_2",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_112",
+			  "MXM3_118",
+			  "MXM3_114",
+			  "MXM3_116";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_286",
+			  "",
+			  "MXM3_87",
+			  "MXM3_99",
+			  "MXM3_138",
+			  "MXM3_140",
+			  "MXM3_239",
+			  "",
+			  "MXM3_281",
+			  "MXM3_283",
+			  "MXM3_126",
+			  "MXM3_132",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_173",
+			  "MXM3_175",
+			  "MXM3_123";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_198",
+			  "MXM3_35",
+			  "MXM3_164",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_217",
+			  "MXM3_215",
+			  "",
+			  "",
+			  "MXM3_193",
+			  "MXM3_194",
+			  "MXM3_37",
+			  "",
+			  "MXM3_271",
+			  "MXM3_273",
+			  "MXM3_195",
+			  "MXM3_197",
+			  "MXM3_177",
+			  "MXM3_179",
+			  "MXM3_181",
+			  "MXM3_183",
+			  "MXM3_185",
+			  "MXM3_187";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "MXM3_191",
+			  "",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_200",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_204",
+			  "MXM3_196",
+			  "",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "MXM3_305",
+			  "MXM3_307",
+			  "MXM3_309",
+			  "MXM3_311",
+			  "MXM3_315",
+			  "MXM3_317",
+			  "MXM3_319",
+			  "MXM3_321",
+			  "MXM3_15/GPIO7",
+			  "MXM3_63",
+			  "MXM3_17/GPIO8",
+			  "MXM3_12",
+			  "MXM3_14",
+			  "MXM3_16";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "MXM3_18",
+			  "MXM3_11/GPIO5",
+			  "MXM3_13/GPIO6",
+			  "MXM3_274",
+			  "MXM3_84",
+			  "MXM3_262",
+			  "MXM3_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "",
+			  "",
+			  "",
+			  "MXM3_269",
+			  "MXM3_251",
+			  "MXM3_253",
+			  "MXM3_295",
+			  "MXM3_299",
+			  "MXM3_301",
+			  "MXM3_297",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287";
+
+	/* Enable pcie root / sata ref clock unconditionally */
+	pcie-sata-hog {
+		gpios = <27 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_150",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_144",
+			  "MXM3_146",
+			  "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_159",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_186",
+			  "MXM3_188",
+			  "MXM3_176",
+			  "MXM3_178";
+};
+
+&lsio_gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_261",
+			  "MXM3_263",
+			  "MXM3_259",
+			  "MXM3_257",
+			  "MXM3_255",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_265",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_243";
+};
+
+&pinctrl_fec1 {
+	fsl,pins =
+		/* Use pads in 1.8V mode */
+		<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+		<IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020>,
+		<IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO				0x06000020>,
+		<IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL		0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL		0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3			0x06000020>,
+		<IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M	0x06000020>,
+		/* On-module ETH_RESET# */
+		<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x06000020>,
+		/* On-module ETH_INT# */
+		<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05				0x04000060>;
+};
+
+&pinctrl_fec1_sleep {
+	fsl,pins =
+		<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+		<IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14				0x04000040>,
+		<IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13				0x04000040>,
+		<IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30				0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04				0x04000040>,
+		<IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09			0x04000040>,
+		<IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15			0x04000040>,
+		<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x04000040>,
+		<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05				0x04000040>;
+};
+
+&iomuxc {
+	/* Apalis I2C2 (DDC) */
+	pinctrl_lpi2c0: lpi2c0grp {
+		fsl,pins =
+			<IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL			0x04000022>,
+			<IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA			0x04000022>;
+	};
+};
+
+/* On-module PCIe_CTRL0_CLKREQ */
+&pinctrl_pcie_sata_refclk {
+	fsl,pins =
+		<IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27			0x00000021>;
+};
+
+/* TODO: On-module Wi-Fi */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	/*
+	 * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
+	 * issues with certain SD cards, disable 1.8V signaling for now.
+	 */
+	no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	/*
+	 * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
+	 * issues with certain SD cards, disable 1.8V signaling for now.
+	 */
+	no-1-8-v;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
new file mode 100644
index 0000000000..0b34cc2250
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "imx8qm.dtsi"
+
+/ {
+	model = "Freescale i.MX8QM MEK";
+	compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+		/delete-node/ cpu@101;
+	};
+
+	thermal-zones {
+		/delete-node/ cpu1-thermal;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_usdhc2_vmmc: usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
+			IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+			IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
+			IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
+			IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
+			IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
+			IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
+			IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
+			IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+			IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
+			IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
+			IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
+			IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QM_UART0_RX_DMA_UART0_RX				0x06000020
+			IMX8QM_UART0_TX_DMA_UART0_TX				0x06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041
+			IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD				0x00000021
+			IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
+			IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
+			IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
+			IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
+			IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021
+			IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021
+			IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021
+			IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021
+			IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE			0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
+			IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
+			IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
+			IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
+			IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
+			IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
+			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
new file mode 100644
index 0000000000..ec1639174e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&fec1 {
+	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&fec2 {
+	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
new file mode 100644
index 0000000000..e9b198c13b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&dma_subsys {
+	uart4_lpcg: clock-controller@5a4a0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a4a0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_4 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart4_lpcg_baud_clk",
+				     "uart4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_4>;
+	};
+
+	can1_lpcg: clock-controller@5ace0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ace0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can1_lpcg_pe_clk",
+				     "can1_lpcg_ipg_clk",
+				     "can1_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_1>;
+	};
+
+	can2_lpcg: clock-controller@5acf0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5acf0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can2_lpcg_pe_clk",
+				     "can2_lpcg_ipg_clk",
+				     "can2_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_2>;
+	};
+};
+
+&flexcan1 {
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&flexcan2 {
+	clocks = <&can1_lpcg 1>,
+		 <&can1_lpcg 0>;
+	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&flexcan3 {
+	clocks = <&can2_lpcg 1>,
+		 <&can2_lpcg 0>;
+	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&lpuart0 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&i2c0 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c1 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c2 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c3 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
new file mode 100644
index 0000000000..2bbdacb131
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+&jpegdec {
+	compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec";
+};
+
+&jpegenc {
+	compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
new file mode 100644
index 0000000000..b483134f84
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 6>,
+		      <&iomuxc 6 7 22>,
+		      <&iomuxc 28 36 4>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 4>,
+		      <&iomuxc 4 50 12>,
+		      <&iomuxc 16 63 8>,
+		      <&iomuxc 24 72 8>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 80 4>,
+		      <&iomuxc 4 85 18>,
+		      <&iomuxc 22 104 10>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 114 2>,
+		      <&iomuxc 2 117 16>,
+		      <&iomuxc 18 141 1>,
+		      <&iomuxc 19 140 1>,
+		      <&iomuxc 20 139 1>,
+		      <&iomuxc 21 138 1>,
+		      <&iomuxc 22 137 1>,
+		      <&iomuxc 23 136 1>,
+		      <&iomuxc 24 135 1>,
+		      <&iomuxc 25 134 1>,
+		      <&iomuxc 26 142 3>,
+		      <&iomuxc 29 146 3>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 149 3>,
+		      <&iomuxc 3 153 4>,
+		      <&iomuxc 7 158 6>,
+		      <&iomuxc 13 165 6>,
+		      <&iomuxc 19 172 8>,
+		      <&iomuxc 27 198 5>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 203 1>,
+		      <&iomuxc 1 205 2>,
+		      <&iomuxc 3 210 11>,
+		      <&iomuxc 14 223 3>,
+		      <&iomuxc 17 227 2>,
+		      <&iomuxc 19 230 5>,
+		      <&iomuxc 24 236 6>,
+		      <&iomuxc 30 243 2>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 245 10>,
+		      <&iomuxc 10 256 12>;
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu6 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu13 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
new file mode 100644
index 0000000000..31744fc1ab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pads-imx8qm.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		vpu-core0 = &vpu_core0;
+		vpu-core1 = &vpu_core1;
+		vpu-core2 = &vpu_core2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A72_0>;
+				};
+				core1 {
+					cpu = <&A72_1>;
+				};
+			};
+		};
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A72_0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x100>;
+			clocks = <&clk IMX_SC_R_A72 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A72_L2>;
+			operating-points-v2 = <&a72_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A72_1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x101>;
+			clocks = <&clk IMX_SC_R_A72 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			next-level-cache = <&A72_L2>;
+			operating-points-v2 = <&a72_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+
+		A72_L2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+	};
+
+	a53_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-896000000 {
+			opp-hz = /bits/ 64 <896000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	a72_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1596000000 {
+			opp-hz = /bits/ 64 <1596000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xC0000>, /* GICR */
+		      <0x0 0x52000000 0 0x2000>,  /* GICC */
+		      <0x0 0x52010000 0 0x1000>,  /* GICH */
+		      <0x0 0x52020000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	system-controller {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: power-controller {
+			compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8qm-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8qm-iomuxc";
+		};
+
+		rtc: rtc {
+			compatible = "fsl,imx8qxp-sc-rtc";
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_A53>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_A72>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&A72_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A72_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_GPU_0_PID0>;
+
+			trips {
+				gpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+	       gpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_GPU_1_PID0>;
+
+			trips {
+				gpu_alert1: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit1: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		drc0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_DRC_0>;
+
+			trips {
+				drc_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				drc_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-img.dtsi"
+	#include "imx8-ss-dma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8qm-ss-img.dtsi"
+#include "imx8qm-ss-dma.dtsi"
+#include "imx8qm-ss-conn.dtsi"
+#include "imx8qm-ss-lsio.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
new file mode 100644
index 0000000000..50bf7919c8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/ {
+	model = "Einfochips i.MX8QXP AI_ML";
+	compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
+
+	aliases {
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+	};
+
+	chosen {
+		stdout-path = &lpuart2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		user-led1 {
+			label = "green:user1";
+			gpios = <&lsio_gpio4 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user-led2 {
+			label = "green:user2";
+			gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		user-led3 {
+			label = "green:user3";
+			gpios = <&lsio_gpio0 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		user-led4 {
+			label = "green:user4";
+			gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan-active-led {
+			label = "yellow:wlan";
+			gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt-active-led {
+			label = "blue:bt";
+			gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reg_on>;
+		reset-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* BT */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* LS-UART0 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+/* Debug */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+/* PCI-E UART */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+/* WiFi */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-sd;
+	non-removable;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD */
+&usdhc2 {
+	assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
+			IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
+			IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06			0x00000021
+			IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07			0x00000021
+			IMX8QXP_EMMC0_DATA7_LSIO_GPIO4_IO16			0x00000021
+			IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21			0x00000021
+			IMX8QXP_EMMC0_STROBE_LSIO_GPIO4_IO17			0x00000021
+			IMX8QXP_EMMC0_RESET_B_LSIO_GPIO4_IO18			0x00000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QXP_UART0_RX_ADMA_UART0_RX				0X06000020
+			IMX8QXP_UART0_TX_ADMA_UART0_TX				0X06000020
+			IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B			0x06000020
+			IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B			0x06000020
+		>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			IMX8QXP_UART1_RX_ADMA_UART1_RX				0X06000020
+			IMX8QXP_UART1_TX_ADMA_UART1_TX				0X06000020
+		>;
+	};
+
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			IMX8QXP_UART2_RX_ADMA_UART2_RX				0X06000020
+			IMX8QXP_UART2_TX_ADMA_UART2_TX				0X06000020
+		>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX			0X06000020
+			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX			0X06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
+			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
+			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
+			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
+			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
+			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
+			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
+			IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22			0x00000021
+		>;
+	};
+
+	pinctrl_wifi_reg_on: wifiregongrp {
+		fsl,pins = <
+			IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24			0x00000021
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts
new file mode 100644
index 0000000000..966ecfb2a1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Aster Board";
+	compatible = "toradex,colibri-imx8x-aster",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
new file mode 100644
index 0000000000..fe4597a6f7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx8x-eval-v3",
+		     "toradex,colibri-imx8x", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts
new file mode 100644
index 0000000000..cca33213fa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Iris V2 Board";
+	compatible = "toradex,colibri-imx8x-iris-v2",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts
new file mode 100644
index 0000000000..fed75b5d4a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Iris Board";
+	compatible = "toradex,colibri-imx8x-iris",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
new file mode 100644
index 0000000000..0f1aa31dd3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+#include "imx8qxp.dtsi"
+#include "imx8x-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP Module";
+	compatible = "toradex,colibri-imx8x", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
new file mode 100644
index 0000000000..7924b0969a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017~2018 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Freescale i.MX8QXP MEK";
+	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_usdhc2_vmmc: usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-sbu-mux {
+		compatible = "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec_mux>;
+		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+};
+
+&dsp {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9646", "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			max7322: gpio@68 {
+				compatible = "maxim,max7322";
+				reg = <0x68>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			pressure-sensor@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			pca9557_a: gpio@1a {
+				compatible = "nxp,pca9557";
+				reg = <0x1a>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pca9557_b: gpio@1d {
+				compatible = "nxp,pca9557";
+				reg = <0x1d>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor@44 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isl29023>;
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&lsio_gpio1>;
+				interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			};
+		};
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		reg = <0x50>;
+		interrupt-parent = <&lsio_gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			typec_dr_sw: endpoint {
+				remote-endpoint = <&usb3_drd_sw>;
+			};
+		};
+
+		usb_con1: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&scu_key {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
+			IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
+			IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
+		>;
+	};
+
+	pinctrl_ioexp_rst: ioexprstgrp {
+		fsl,pins = <
+			IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01			0x06000021
+		>;
+	};
+
+	pinctrl_isl29023: isl29023grp {
+		fsl,pins = <
+			IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02			0x00000021
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL			0x06000021
+			IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA			0x06000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QXP_UART0_RX_ADMA_UART0_RX				0x06000020
+			IMX8QXP_UART0_TX_ADMA_UART0_TX				0x06000020
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
+		>;
+	};
+
+	pinctrl_typec_mux: typecmuxgrp {
+		fsl,pins = <
+			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09           0x60
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE			0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
+			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
+			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
+			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
+			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
+			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
+			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
new file mode 100644
index 0000000000..7bae516004
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&lpuart0 {
+	compatible = "fsl,imx8qxp-lpuart";
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8qxp-lpuart";
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8qxp-lpuart";
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8qxp-lpuart";
+};
+
+&i2c0 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c1 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c2 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c3 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
new file mode 100644
index 0000000000..46da21af37
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&usdhc1 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&fec1 {
+	compatible = "fsl,imx8qxp-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&fec2 {
+	compatible = "fsl,imx8qxp-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
new file mode 100644
index 0000000000..3a08731759
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&jpegdec {
+	compatible = "nxp,imx8qxp-jpgdec";
+};
+
+&jpegenc {
+	compatible = "nxp,imx8qxp-jpgenc";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
new file mode 100644
index 0000000000..8f722b1dd0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 1 56 12>,
+		      <&iomuxc 13 69 4>,
+		      <&iomuxc 19 75 4>,
+		      <&iomuxc 24 80 1>,
+		      <&iomuxc 25 82 7>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 89 9>,
+		      <&iomuxc 9 99 16>,
+		      <&iomuxc 25 116 7>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 123 1>,
+		      <&iomuxc 1 126 2>,
+		      <&iomuxc 3 129 1>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 146 4>,
+		      <&iomuxc 4 151 13>,
+		      <&iomuxc 17 165 8>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 6>,
+		      <&iomuxc 13 16 6>,
+		      <&iomuxc 19 23 2>,
+		      <&iomuxc 21 26 2>,
+		      <&iomuxc 23 30 6>,
+		      <&iomuxc 29 37 3>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 3>,
+		      <&iomuxc 3 44 6>,
+		      <&iomuxc 9 51 3>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu6 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu13 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
new file mode 100644
index 0000000000..c80c85a4b4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mu0 = &lsio_mu0;
+		mu1 = &lsio_mu1;
+		mu2 = &lsio_mu2;
+		mu3 = &lsio_mu3;
+		mu4 = &lsio_mu4;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		vpu-core0 = &vpu_core0;
+		vpu-core1 = &vpu_core1;
+		vpu-core2 = &vpu_core2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 clusters with 4 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder_boot: encoder-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x100000>;
+			no-map;
+		};
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder_rpc: encoder-rpc@94400000 {
+			reg = <0 0x94400000 0 0x700000>;
+			no-map;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	system-controller {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: power-controller {
+			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8qxp-iomuxc";
+		};
+
+		ocotp: ocotp {
+			compatible = "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		scu_key: keys {
+			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+			linux,keycodes = <KEY_POWER>;
+			status = "disabled";
+		};
+
+		rtc: rtc {
+			compatible = "fsl,imx8qxp-sc-rtc";
+		};
+
+		watchdog {
+			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-img.dtsi"
+	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8qxp-ss-img.dtsi"
+#include "imx8qxp-ss-adma.dtsi"
+#include "imx8qxp-ss-conn.dtsi"
+#include "imx8qxp-ss-lsio.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
new file mode 100644
index 0000000000..69dd8e3102
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp.dtsi"
+
+/ {
+	model = "NXP i.MX8ULP EVK";
+	compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
+
+	chosen {
+		stdout-path = &lpuart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x28000000>;
+			linux,cma-default;
+		};
+
+		m33_reserved: noncacheable-section@a8600000 {
+			reg = <0 0xa8600000 0 0x1000000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@1fff8000{
+			reg = <0 0x1fff8000 0 0x1000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@aff00000 {
+			reg = <0 0xaff00000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@aff08000 {
+			reg = <0 0xaff08000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@aff10000 {
+			reg = <0 0xaff10000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@aff18000 {
+			reg = <0 0xaff18000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a8400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa8400000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	clock_ext_rmii: clock-ext-rmii {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_rmii_clk";
+		#clock-cells = <0>;
+	};
+
+	clock_ext_ts: clock-ext-ts {
+		compatible = "fixed-clock";
+		/* External ts clock is 50MHZ from PHY on EVK board. */
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_ts_clk";
+		#clock-cells = <0>;
+	};
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu 0 1>,
+		 <&mu 1 1>,
+		 <&mu 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&flexspi2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexspi2_ptd>;
+	pinctrl-1 = <&pinctrl_flexspi2_ptd>;
+	status = "okay";
+
+	mx25uw51345gxdi00: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <200000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
+&lpuart5 {
+	/* console */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpuart5>;
+	pinctrl-1 = <&pinctrl_lpuart5>;
+	status = "okay";
+};
+
+&lpi2c7 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+	pinctrl-1 = <&pinctrl_lpi2c7>;
+	status = "okay";
+
+	pcal6408: gpio@21 {
+		compatible = "nxp,pcal9554b";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet>;
+	pinctrl-1 = <&pinctrl_enet>;
+	clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+		 <&pcc4 IMX8ULP_CLK_ENET>,
+		 <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>,
+		 <&clock_ext_rmii>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clock_ext_ts>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <1>;
+		};
+	};
+};
+
+&mu {
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE15__ENET0_MDC     0x43
+			MX8ULP_PAD_PTE14__ENET0_MDIO    0x43
+			MX8ULP_PAD_PTE17__ENET0_RXER    0x43
+			MX8ULP_PAD_PTE18__ENET0_CRS_DV  0x43
+			MX8ULP_PAD_PTF1__ENET0_RXD0     0x43
+			MX8ULP_PAD_PTE20__ENET0_RXD1    0x43
+			MX8ULP_PAD_PTE16__ENET0_TXEN    0x43
+			MX8ULP_PAD_PTE23__ENET0_TXD0    0x43
+			MX8ULP_PAD_PTE22__ENET0_TXD1    0x43
+			MX8ULP_PAD_PTE19__ENET0_REFCLK  0x43
+			MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
+		>;
+	};
+
+	pinctrl_flexspi2_ptd: flexspi2ptdgrp {
+		fsl,pins = <
+
+			MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B	0x42
+			MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK	0x42
+			MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3	0x42
+			MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2	0x42
+			MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1	0x42
+			MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0	0x42
+			MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS	0x42
+			MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7	0x42
+			MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6	0x42
+			MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5	0x42
+			MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4	0x42
+		>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
+			MX8ULP_PAD_PTF15__LPUART5_RX	0x3
+		>;
+	};
+
+	pinctrl_lpi2c7: lpi2c7grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE12__LPI2C7_SCL	0x20
+			MX8ULP_PAD_PTE13__LPI2C7_SDA	0x20
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTD1__SDHC0_CMD	0x3
+			MX8ULP_PAD_PTD2__SDHC0_CLK	0x10002
+			MX8ULP_PAD_PTD10__SDHC0_D0	0x3
+			MX8ULP_PAD_PTD9__SDHC0_D1	0x3
+			MX8ULP_PAD_PTD8__SDHC0_D2	0x3
+			MX8ULP_PAD_PTD7__SDHC0_D3	0x3
+			MX8ULP_PAD_PTD6__SDHC0_D4	0x3
+			MX8ULP_PAD_PTD5__SDHC0_D5	0x3
+			MX8ULP_PAD_PTD4__SDHC0_D6	0x3
+			MX8ULP_PAD_PTD3__SDHC0_D7	0x3
+			MX8ULP_PAD_PTD11__SDHC0_DQS	0x10002
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
new file mode 100644
index 0000000000..b204ac79b4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
@@ -0,0 +1,978 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef __DTS_IMX8ULP_PINFUNC_H
+#define __DTS_IMX8ULP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg input_reg mux_mode input_val>
+ */
+#define MX8ULP_PAD_PTD0__PTD0                                        0x0000 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD0__I2S6_RX_BCLK                                0x0000 0x0B44 0x7 0x1
+#define MX8ULP_PAD_PTD0__SDHC0_RESET_B                               0x0000 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD0__FLEXSPI2_B_DQS                              0x0000 0x0974 0x9 0x1
+#define MX8ULP_PAD_PTD0__CLKOUT2                                     0x0000 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD0__EPDC0_SDCLK_B                               0x0000 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD0__LP_APD_DBG_MUX_0                            0x0000 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD0__CLKOUT1                                     0x0000 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD0__DEBUG_MUX0_0                                0x0000 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD0__DEBUG_MUX1_0                                0x0000 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD1__PTD1                                        0x0004 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD1__I2S6_RX_FS                                  0x0004 0x0B48 0x7 0x1
+#define MX8ULP_PAD_PTD1__SDHC0_CMD                                   0x0004 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD1__FLEXSPI2_B_DATA7                            0x0004 0x0970 0x9 0x1
+#define MX8ULP_PAD_PTD1__EPDC0_SDCLK                                 0x0004 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD1__DPI0_PCLK                                   0x0004 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD1__LP_APD_DBG_MUX_1                            0x0004 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD1__DEBUG_MUX0_1                                0x0004 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD1__DEBUG_MUX1_1                                0x0004 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD2__PTD2                                        0x0008 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD2__I2S6_RXD0                                   0x0008 0x0B34 0x7 0x1
+#define MX8ULP_PAD_PTD2__SDHC0_CLK                                   0x0008 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD2__FLEXSPI2_B_DATA6                            0x0008 0x096C 0x9 0x1
+#define MX8ULP_PAD_PTD2__EPDC0_SDLE                                  0x0008 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD2__DPI0_HSYNC                                  0x0008 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD2__LP_APD_DBG_MUX_2                            0x0008 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD2__DEBUG_MUX0_2                                0x0008 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD2__DEBUG_MUX1_2                                0x0008 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD3__PTD3                                        0x000C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD3__I2S6_RXD1                                   0x000C 0x0B38 0x7 0x1
+#define MX8ULP_PAD_PTD3__SDHC0_D7                                    0x000C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD3__FLEXSPI2_B_DATA5                            0x000C 0x0968 0x9 0x1
+#define MX8ULP_PAD_PTD3__EPDC0_GDSP                                  0x000C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD3__DPI0_VSYNC                                  0x000C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD3__LP_APD_DBG_MUX_3                            0x000C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD3__DEBUG_MUX0_3                                0x000C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD3__DEBUG_MUX1_3                                0x000C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD4__PTD4                                        0x0010 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD4__EXT_AUD_MCLK3                               0x0010 0x0B14 0x4 0x1
+#define MX8ULP_PAD_PTD4__SDHC0_VS                                    0x0010 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD4__TPM8_CH5                                    0x0010 0x0B2C 0x6 0x1
+#define MX8ULP_PAD_PTD4__I2S6_MCLK                                   0x0010 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD4__SDHC0_D6                                    0x0010 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD4__FLEXSPI2_B_DATA4                            0x0010 0x0964 0x9 0x1
+#define MX8ULP_PAD_PTD4__EPDC0_SDCE0                                 0x0010 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD4__DPI0_DE                                     0x0010 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD4__LP_APD_DBG_MUX_4                            0x0010 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD4__DEBUG_MUX0_4                                0x0010 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD4__DEBUG_MUX1_4                                0x0010 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD5__PTD5                                        0x0014 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD5__SDHC0_CD                                    0x0014 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD5__TPM8_CH4                                    0x0014 0x0B28 0x6 0x1
+#define MX8ULP_PAD_PTD5__I2S6_TX_BCLK                                0x0014 0x0B4C 0x7 0x1
+#define MX8ULP_PAD_PTD5__SDHC0_D5                                    0x0014 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD5__FLEXSPI2_B_SS0_B                            0x0014 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD5__FLEXSPI2_B_SCLK_B                           0x0014 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD5__EPDC0_D0                                    0x0014 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD5__DPI0_D0                                     0x0014 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD5__LP_APD_DBG_MUX_5                            0x0014 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD5__DEBUG_MUX0_5                                0x0014 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD5__DEBUG_MUX1_5                                0x0014 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD6__PTD6                                        0x0018 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD6__SDHC0_WP                                    0x0018 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD6__TPM8_CH3                                    0x0018 0x0B24 0x6 0x1
+#define MX8ULP_PAD_PTD6__I2S6_TX_FS                                  0x0018 0x0B50 0x7 0x1
+#define MX8ULP_PAD_PTD6__SDHC0_D4                                    0x0018 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD6__FLEXSPI2_B_SCLK                             0x0018 0x0978 0x9 0x1
+#define MX8ULP_PAD_PTD6__EPDC0_D1                                    0x0018 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD6__DPI0_D1                                     0x0018 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD6__LP_APD_DBG_MUX_6                            0x0018 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD6__DEBUG_MUX0_6                                0x0018 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD6__DEBUG_MUX1_6                                0x0018 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD7__PTD7                                        0x001C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD7__TPM8_CH2                                    0x001C 0x0B20 0x6 0x1
+#define MX8ULP_PAD_PTD7__I2S6_TXD0                                   0x001C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD7__SDHC0_D3                                    0x001C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD7__FLEXSPI2_B_DATA3                            0x001C 0x0960 0x9 0x1
+#define MX8ULP_PAD_PTD7__EPDC0_D2                                    0x001C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD7__DPI0_D2                                     0x001C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD7__LP_APD_DBG_MUX_7                            0x001C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD7__DEBUG_MUX0_7                                0x001C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD7__DEBUG_MUX1_7                                0x001C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD8__PTD8                                        0x0020 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD8__TPM8_CH1                                    0x0020 0x0B1C 0x6 0x1
+#define MX8ULP_PAD_PTD8__I2S6_TXD1                                   0x0020 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD8__SDHC0_D2                                    0x0020 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD8__FLEXSPI2_B_DATA2                            0x0020 0x095C 0x9 0x1
+#define MX8ULP_PAD_PTD8__EPDC0_D3                                    0x0020 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD8__DPI0_D3                                     0x0020 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD8__LP_APD_DBG_MUX_8                            0x0020 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD8__DEBUG_MUX1_8                                0x0020 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD9__PTD9                                        0x0024 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD9__TPM8_CLKIN                                  0x0024 0x0B30 0x6 0x1
+#define MX8ULP_PAD_PTD9__I2S6_TXD2                                   0x0024 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD9__SDHC0_D1                                    0x0024 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD9__FLEXSPI2_B_DATA1                            0x0024 0x0958 0x9 0x1
+#define MX8ULP_PAD_PTD9__EPDC0_D4                                    0x0024 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD9__DPI0_D4                                     0x0024 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD9__LP_APD_DBG_MUX_9                            0x0024 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD9__DEBUG_MUX1_9                                0x0024 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD10__PTD10                                      0x0028 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD10__TPM8_CH0                                   0x0028 0x0B18 0x6 0x1
+#define MX8ULP_PAD_PTD10__I2S6_TXD3                                  0x0028 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD10__SDHC0_D0                                   0x0028 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD10__FLEXSPI2_B_DATA0                           0x0028 0x0954 0x9 0x1
+#define MX8ULP_PAD_PTD10__EPDC0_D5                                   0x0028 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD10__DPI0_D5                                    0x0028 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD10__LP_APD_DBG_MUX_10                          0x0028 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD10__DEBUG_MUX1_10                              0x0028 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD11__PTD11                                      0x002C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD11__TPM8_CH5                                   0x002C 0x0B2C 0x6 0x2
+#define MX8ULP_PAD_PTD11__I2S6_RXD2                                  0x002C 0x0B3C 0x7 0x1
+#define MX8ULP_PAD_PTD11__SDHC0_DQS                                  0x002C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD11__FLEXSPI2_B_SS0_B                           0x002C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD11__FLEXSPI2_A_SS1_B                           0x002C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD11__EPDC0_D6                                   0x002C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD11__DPI0_D6                                    0x002C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD11__LP_APD_DBG_MUX_11                          0x002C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD12__PTD12                                      0x0030 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD12__USB0_ID                                    0x0030 0x0AC8 0x5 0x1
+#define MX8ULP_PAD_PTD12__SDHC2_D3                                   0x0030 0x0AA4 0x6 0x1
+#define MX8ULP_PAD_PTD12__I2S7_RX_BCLK                               0x0030 0x0B64 0x7 0x1
+#define MX8ULP_PAD_PTD12__SDHC1_DQS                                  0x0030 0x0A84 0x8 0x1
+#define MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B                           0x0030 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD12__FLEXSPI2_B_SS1_B                           0x0030 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD12__EPDC0_D7                                   0x0030 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD12__DPI0_D7                                    0x0030 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD12__LP_APD_DBG_MUX_12                          0x0030 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD13__PTD13                                      0x0034 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD13__SPDIF_IN3                                  0x0034 0x0B80 0x4 0x1
+#define MX8ULP_PAD_PTD13__USB0_PWR                                   0x0034 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD13__SDHC2_D2                                   0x0034 0x0AA0 0x6 0x1
+#define MX8ULP_PAD_PTD13__I2S7_RX_FS                                 0x0034 0x0B68 0x7 0x1
+#define MX8ULP_PAD_PTD13__SDHC1_RESET_B                              0x0034 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK                            0x0034 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD13__CLKOUT2                                    0x0034 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD13__EPDC0_D8                                   0x0034 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD13__DPI0_D8                                    0x0034 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD13__CLKOUT1                                    0x0034 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD13__LP_APD_DBG_MUX_13                          0x0034 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD14__PTD14                                      0x0038 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD14__SPDIF_OUT3                                 0x0038 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD14__USB0_OC                                    0x0038 0x0AC0 0x5 0x1
+#define MX8ULP_PAD_PTD14__SDHC2_D1                                   0x0038 0x0A9C 0x6 0x1
+#define MX8ULP_PAD_PTD14__I2S7_RXD0                                  0x0038 0x0B54 0x7 0x1
+#define MX8ULP_PAD_PTD14__SDHC1_D7                                   0x0038 0x0A80 0x8 0x1
+#define MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3                           0x0038 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD14__TRACE0_D7                                  0x0038 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD14__EPDC0_D9                                   0x0038 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD14__DPI0_D9                                    0x0038 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD14__LP_APD_DBG_MUX_14                          0x0038 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD15__PTD15                                      0x003C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD15__SPDIF_IN2                                  0x003C 0x0B7C 0x4 0x1
+#define MX8ULP_PAD_PTD15__SDHC1_VS                                   0x003C 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD15__SDHC2_D0                                   0x003C 0x0A98 0x6 0x1
+#define MX8ULP_PAD_PTD15__I2S7_TX_BCLK                               0x003C 0x0B6C 0x7 0x1
+#define MX8ULP_PAD_PTD15__SDHC1_D6                                   0x003C 0x0A7C 0x8 0x1
+#define MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2                           0x003C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD15__TRACE0_D6                                  0x003C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD15__EPDC0_D10                                  0x003C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD15__DPI0_D10                                   0x003C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD15__LP_APD_DBG_MUX_15                          0x003C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD16__PTD16                                      0x0040 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD16__FXIO1_D31                                  0x0040 0x08A0 0x2 0x1
+#define MX8ULP_PAD_PTD16__LPSPI4_PCS1                                0x0040 0x08F8 0x3 0x1
+#define MX8ULP_PAD_PTD16__SPDIF_OUT2                                 0x0040 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD16__SDHC1_CD                                   0x0040 0x0A58 0x5 0x1
+#define MX8ULP_PAD_PTD16__SDHC2_CLK                                  0x0040 0x0A90 0x6 0x1
+#define MX8ULP_PAD_PTD16__I2S7_TX_FS                                 0x0040 0x0B70 0x7 0x1
+#define MX8ULP_PAD_PTD16__SDHC1_D5                                   0x0040 0x0A78 0x8 0x1
+#define MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1                           0x0040 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD16__TRACE0_D5                                  0x0040 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD16__EPDC0_D11                                  0x0040 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD16__DPI0_D11                                   0x0040 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD16__LP_APD_DBG_MUX_16                          0x0040 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD17__PTD17                                      0x0044 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD17__FXIO1_D30                                  0x0044 0x089C 0x2 0x1
+#define MX8ULP_PAD_PTD17__LPSPI4_PCS2                                0x0044 0x08FC 0x3 0x1
+#define MX8ULP_PAD_PTD17__EXT_AUD_MCLK3                              0x0044 0x0B14 0x4 0x2
+#define MX8ULP_PAD_PTD17__SDHC1_WP                                   0x0044 0x0A88 0x5 0x1
+#define MX8ULP_PAD_PTD17__SDHC2_CMD                                  0x0044 0x0A94 0x6 0x1
+#define MX8ULP_PAD_PTD17__I2S7_TXD0                                  0x0044 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD17__SDHC1_D4                                   0x0044 0x0A74 0x8 0x1
+#define MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0                           0x0044 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD17__TRACE0_D4                                  0x0044 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD17__EPDC0_D12                                  0x0044 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD17__DPI0_D12                                   0x0044 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD17__LP_APD_DBG_MUX_17                          0x0044 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD18__PTD18                                      0x0048 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD18__FXIO1_D29                                  0x0048 0x0894 0x2 0x1
+#define MX8ULP_PAD_PTD18__LPSPI4_PCS3                                0x0048 0x0900 0x3 0x1
+#define MX8ULP_PAD_PTD18__SPDIF_CLK                                  0x0048 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD18__EXT_AUD_MCLK3                              0x0048 0x0B14 0x5 0x3
+#define MX8ULP_PAD_PTD18__TPM8_CH0                                   0x0048 0x0B18 0x6 0x2
+#define MX8ULP_PAD_PTD18__I2S7_MCLK                                  0x0048 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD18__SDHC1_D3                                   0x0048 0x0A70 0x8 0x1
+#define MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS                             0x0048 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD18__TRACE0_D3                                  0x0048 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD18__EPDC0_D13                                  0x0048 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD18__DPI0_D13                                   0x0048 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD18__LP_APD_DBG_MUX_18                          0x0048 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD19__PTD19                                      0x004C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD19__FXIO1_D28                                  0x004C 0x0890 0x2 0x1
+#define MX8ULP_PAD_PTD19__SPDIF_IN0                                  0x004C 0x0B74 0x4 0x1
+#define MX8ULP_PAD_PTD19__TPM8_CH1                                   0x004C 0x0B1C 0x6 0x2
+#define MX8ULP_PAD_PTD19__I2S6_RXD3                                  0x004C 0x0B40 0x7 0x1
+#define MX8ULP_PAD_PTD19__SDHC1_D2                                   0x004C 0x0A6C 0x8 0x1
+#define MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7                           0x004C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD19__TRACE0_D2                                  0x004C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD19__EPDC0_D14                                  0x004C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD19__DPI0_D14                                   0x004C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD19__LP_APD_DBG_MUX_19                          0x004C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD20__PTD20                                      0x0050 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD20__FXIO1_D27                                  0x0050 0x088C 0x2 0x1
+#define MX8ULP_PAD_PTD20__LPSPI4_SIN                                 0x0050 0x0908 0x3 0x1
+#define MX8ULP_PAD_PTD20__SPDIF_OUT0                                 0x0050 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD20__TPM8_CLKIN                                 0x0050 0x0B30 0x6 0x2
+#define MX8ULP_PAD_PTD20__I2S7_RXD1                                  0x0050 0x0B58 0x7 0x1
+#define MX8ULP_PAD_PTD20__SDHC1_D1                                   0x0050 0x0A68 0x8 0x1
+#define MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6                           0x0050 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD20__TRACE0_D1                                  0x0050 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD20__EPDC0_D15                                  0x0050 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD20__DPI0_D15                                   0x0050 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD20__LP_APD_DBG_MUX_20                          0x0050 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD21__PTD21                                      0x0054 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD21__FXIO1_D26                                  0x0054 0x0888 0x2 0x1
+#define MX8ULP_PAD_PTD21__LPSPI4_SOUT                                0x0054 0x090C 0x3 0x1
+#define MX8ULP_PAD_PTD21__SPDIF_IN1                                  0x0054 0x0B78 0x4 0x1
+#define MX8ULP_PAD_PTD21__USB1_PWR                                   0x0054 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD21__TPM8_CH2                                   0x0054 0x0B20 0x6 0x2
+#define MX8ULP_PAD_PTD21__I2S7_TXD1                                  0x0054 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD21__SDHC1_D0                                   0x0054 0x0A64 0x8 0x1
+#define MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5                           0x0054 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD21__TRACE0_D0                                  0x0054 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD21__DPI0_D16                                   0x0054 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD21__WDOG5_RST                                  0x0054 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD21__LP_APD_DBG_MUX_21                          0x0054 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD22__PTD22                                      0x0058 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD22__FXIO1_D25                                  0x0058 0x0884 0x2 0x1
+#define MX8ULP_PAD_PTD22__LPSPI4_SCK                                 0x0058 0x0904 0x3 0x1
+#define MX8ULP_PAD_PTD22__SPDIF_OUT1                                 0x0058 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD22__USB1_OC                                    0x0058 0x0AC4 0x5 0x1
+#define MX8ULP_PAD_PTD22__TPM8_CH3                                   0x0058 0x0B24 0x6 0x2
+#define MX8ULP_PAD_PTD22__I2S7_TXD2                                  0x0058 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD22__SDHC1_CLK                                  0x0058 0x0A5C 0x8 0x1
+#define MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4                           0x0058 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD22__TRACE0_CLKOUT                              0x0058 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD22__DPI0_D17                                   0x0058 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD22__LP_APD_DBG_MUX_22                          0x0058 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD23__PTD23                                      0x005C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD23__FXIO1_D24                                  0x005C 0x0880 0x2 0x1
+#define MX8ULP_PAD_PTD23__LPSPI4_PCS0                                0x005C 0x08F4 0x3 0x1
+#define MX8ULP_PAD_PTD23__USB1_ID                                    0x005C 0x0ACC 0x5 0x1
+#define MX8ULP_PAD_PTD23__TPM8_CH4                                   0x005C 0x0B28 0x6 0x2
+#define MX8ULP_PAD_PTD23__I2S7_TXD3                                  0x005C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD23__SDHC1_CMD                                  0x005C 0x0A60 0x8 0x1
+#define MX8ULP_PAD_PTD23__FLEXSPI2_A_SS0_B                           0x005C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD23__FLEXSPI2_A_SCLK_B                          0x005C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD23__DPI0_D18                                   0x005C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD23__LP_APD_DBG_MUX_23                          0x005C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE0__PTE0                                        0x0080 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE0__FXIO1_D23                                   0x0080 0x087C 0x2 0x1
+#define MX8ULP_PAD_PTE0__SPDIF_IN3                                   0x0080 0x0B80 0x3 0x2
+#define MX8ULP_PAD_PTE0__LPUART4_CTS_B                               0x0080 0x08DC 0x4 0x1
+#define MX8ULP_PAD_PTE0__LPI2C4_SCL                                  0x0080 0x08C8 0x5 0x1
+#define MX8ULP_PAD_PTE0__TPM8_CLKIN                                  0x0080 0x0B30 0x6 0x3
+#define MX8ULP_PAD_PTE0__I2S7_RXD2                                   0x0080 0x0B5C 0x7 0x1
+#define MX8ULP_PAD_PTE0__SDHC2_D1                                    0x0080 0x0A9C 0x8 0x2
+#define MX8ULP_PAD_PTE0__FLEXSPI2_B_DQS                              0x0080 0x0974 0x9 0x2
+#define MX8ULP_PAD_PTE0__ENET0_CRS                                   0x0080 0x0AE8 0xa 0x1
+#define MX8ULP_PAD_PTE0__DBI0_WRX                                    0x0080 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE0__DPI0_D19                                    0x0080 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE0__WUU1_P0                                     0x0080 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE0__DEBUG_MUX0_8                                0x0080 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE0__DEBUG_MUX1_11                               0x0080 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE1__PTE1                                        0x0084 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE1__FXIO1_D22                                   0x0084 0x0878 0x2 0x1
+#define MX8ULP_PAD_PTE1__SPDIF_OUT3                                  0x0084 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE1__LPUART4_RTS_B                               0x0084 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE1__LPI2C4_SDA                                  0x0084 0x08CC 0x5 0x1
+#define MX8ULP_PAD_PTE1__TPM8_CH0                                    0x0084 0x0B18 0x6 0x3
+#define MX8ULP_PAD_PTE1__I2S7_RXD3                                   0x0084 0x0B60 0x7 0x1
+#define MX8ULP_PAD_PTE1__SDHC2_D0                                    0x0084 0x0A98 0x8 0x2
+#define MX8ULP_PAD_PTE1__FLEXSPI2_B_DATA7                            0x0084 0x0970 0x9 0x2
+#define MX8ULP_PAD_PTE1__ENET0_COL                                   0x0084 0x0AE4 0xa 0x1
+#define MX8ULP_PAD_PTE1__DBI0_CSX                                    0x0084 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE1__DPI0_D20                                    0x0084 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE1__WUU1_P1                                     0x0084 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE1__DEBUG_MUX0_9                                0x0084 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE1__DEBUG_MUX1_12                               0x0084 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE2__PTE2                                        0x0088 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE2__FXIO1_D21                                   0x0088 0x0874 0x2 0x1
+#define MX8ULP_PAD_PTE2__SPDIF_IN2                                   0x0088 0x0B7C 0x3 0x2
+#define MX8ULP_PAD_PTE2__LPUART4_TX                                  0x0088 0x08E4 0x4 0x1
+#define MX8ULP_PAD_PTE2__LPI2C4_HREQ                                 0x0088 0x08C4 0x5 0x1
+#define MX8ULP_PAD_PTE2__TPM8_CH1                                    0x0088 0x0B1C 0x6 0x3
+#define MX8ULP_PAD_PTE2__EXT_AUD_MCLK3                               0x0088 0x0B14 0x7 0x4
+#define MX8ULP_PAD_PTE2__SDHC2_CLK                                   0x0088 0x0A90 0x8 0x2
+#define MX8ULP_PAD_PTE2__FLEXSPI2_B_DATA6                            0x0088 0x096C 0x9 0x2
+#define MX8ULP_PAD_PTE2__ENET0_TXER                                  0x0088 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE2__DBI0_DCX                                    0x0088 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE2__DPI0_D21                                    0x0088 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE2__LP_HV_DBG_MUX_0                             0x0088 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE2__DEBUG_MUX0_10                               0x0088 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE2__DEBUG_MUX1_13                               0x0088 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE3__PTE3                                        0x008C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE3__FXIO1_D20                                   0x008C 0x0870 0x2 0x1
+#define MX8ULP_PAD_PTE3__SPDIF_OUT2                                  0x008C 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE3__LPUART4_RX                                  0x008C 0x08E0 0x4 0x1
+#define MX8ULP_PAD_PTE3__TPM8_CH2                                    0x008C 0x0B20 0x6 0x3
+#define MX8ULP_PAD_PTE3__I2S6_MCLK                                   0x008C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE3__SDHC2_CMD                                   0x008C 0x0A94 0x8 0x2
+#define MX8ULP_PAD_PTE3__FLEXSPI2_B_DATA5                            0x008C 0x0968 0x9 0x2
+#define MX8ULP_PAD_PTE3__ENET0_TXCLK                                 0x008C 0x0B10 0xa 0x1
+#define MX8ULP_PAD_PTE3__DBI0_RWX                                    0x008C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE3__DPI0_D22                                    0x008C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE3__WUU1_P2                                     0x008C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE3__DEBUG_MUX0_11                               0x008C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE3__DEBUG_MUX1_14                               0x008C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE4__PTE4                                        0x0090 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE4__FXIO1_D19                                   0x0090 0x0868 0x2 0x1
+#define MX8ULP_PAD_PTE4__SPDIF_CLK                                   0x0090 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE4__LPUART5_CTS_B                               0x0090 0x08E8 0x4 0x1
+#define MX8ULP_PAD_PTE4__LPI2C5_SCL                                  0x0090 0x08D4 0x5 0x1
+#define MX8ULP_PAD_PTE4__TPM8_CH3                                    0x0090 0x0B24 0x6 0x3
+#define MX8ULP_PAD_PTE4__I2S6_RX_BCLK                                0x0090 0x0B44 0x7 0x2
+#define MX8ULP_PAD_PTE4__SDHC2_D3                                    0x0090 0x0AA4 0x8 0x2
+#define MX8ULP_PAD_PTE4__FLEXSPI2_B_DATA4                            0x0090 0x0964 0x9 0x2
+#define MX8ULP_PAD_PTE4__ENET0_TXD3                                  0x0090 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE4__DBI0_E                                      0x0090 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE4__DPI0_D23                                    0x0090 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE4__WUU1_P3                                     0x0090 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE4__DEBUG_MUX0_12                               0x0090 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE4__DEBUG_MUX1_15                               0x0090 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE5__PTE5                                        0x0094 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE5__FXIO1_D18                                   0x0094 0x0864 0x2 0x1
+#define MX8ULP_PAD_PTE5__SPDIF_IN0                                   0x0094 0x0B74 0x3 0x2
+#define MX8ULP_PAD_PTE5__LPUART5_RTS_B                               0x0094 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE5__LPI2C5_SDA                                  0x0094 0x08D8 0x5 0x1
+#define MX8ULP_PAD_PTE5__TPM8_CH4                                    0x0094 0x0B28 0x6 0x3
+#define MX8ULP_PAD_PTE5__I2S6_RX_FS                                  0x0094 0x0B48 0x7 0x2
+#define MX8ULP_PAD_PTE5__SDHC2_D2                                    0x0094 0x0AA0 0x8 0x2
+#define MX8ULP_PAD_PTE5__FLEXSPI2_B_SS0_B                            0x0094 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE5__ENET0_TXD2                                  0x0094 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE5__DBI0_D0                                     0x0094 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE5__LP_HV_DBG_MUX_1                             0x0094 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE5__DEBUG_MUX0_13                               0x0094 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE5__DEBUG_MUX1_16                               0x0094 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE6__PTE6                                        0x0098 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE6__FXIO1_D17                                   0x0098 0x0860 0x2 0x1
+#define MX8ULP_PAD_PTE6__SPDIF_OUT0                                  0x0098 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE6__LPUART5_TX                                  0x0098 0x08F0 0x4 0x1
+#define MX8ULP_PAD_PTE6__LPI2C5_HREQ                                 0x0098 0x08D0 0x5 0x1
+#define MX8ULP_PAD_PTE6__TPM8_CH5                                    0x0098 0x0B2C 0x6 0x3
+#define MX8ULP_PAD_PTE6__I2S6_RXD0                                   0x0098 0x0B34 0x7 0x2
+#define MX8ULP_PAD_PTE6__SDHC2_D4                                    0x0098 0x0AA8 0x8 0x1
+#define MX8ULP_PAD_PTE6__FLEXSPI2_B_SCLK                             0x0098 0x0978 0x9 0x2
+#define MX8ULP_PAD_PTE6__ENET0_RXCLK                                 0x0098 0x0B0C 0xa 0x1
+#define MX8ULP_PAD_PTE6__DBI0_D1                                     0x0098 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE6__LP_HV_DBG_MUX_2                             0x0098 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE6__WDOG5_RST                                   0x0098 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE6__DEBUG_MUX0_14                               0x0098 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE6__DEBUG_MUX1_17                               0x0098 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE7__PTE7                                        0x009C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE7__FXIO1_D16                                   0x009C 0x085C 0x2 0x1
+#define MX8ULP_PAD_PTE7__SPDIF_IN1                                   0x009C 0x0B78 0x3 0x2
+#define MX8ULP_PAD_PTE7__LPUART5_RX                                  0x009C 0x08EC 0x4 0x1
+#define MX8ULP_PAD_PTE7__LPI2C6_HREQ                                 0x009C 0x09B4 0x5 0x1
+#define MX8ULP_PAD_PTE7__TPM4_CLKIN                                  0x009C 0x081C 0x6 0x1
+#define MX8ULP_PAD_PTE7__I2S6_RXD1                                   0x009C 0x0B38 0x7 0x2
+#define MX8ULP_PAD_PTE7__SDHC2_D5                                    0x009C 0x0AAC 0x8 0x1
+#define MX8ULP_PAD_PTE7__FLEXSPI2_B_DATA3                            0x009C 0x0960 0x9 0x2
+#define MX8ULP_PAD_PTE7__ENET0_RXD3                                  0x009C 0x0B04 0xa 0x1
+#define MX8ULP_PAD_PTE7__DBI0_D2                                     0x009C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE7__EPDC0_BDR1                                  0x009C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE7__WUU1_P4                                     0x009C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE7__DEBUG_MUX0_15                               0x009C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE7__DEBUG_MUX1_18                               0x009C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE8__PTE8                                        0x00A0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE8__FXIO1_D15                                   0x00A0 0x0858 0x2 0x1
+#define MX8ULP_PAD_PTE8__LPSPI4_PCS1                                 0x00A0 0x08F8 0x3 0x2
+#define MX8ULP_PAD_PTE8__LPUART6_CTS_B                               0x00A0 0x09CC 0x4 0x1
+#define MX8ULP_PAD_PTE8__LPI2C6_SCL                                  0x00A0 0x09B8 0x5 0x1
+#define MX8ULP_PAD_PTE8__TPM4_CH0                                    0x00A0 0x0804 0x6 0x1
+#define MX8ULP_PAD_PTE8__I2S6_RXD2                                   0x00A0 0x0B3C 0x7 0x2
+#define MX8ULP_PAD_PTE8__SDHC2_D6                                    0x00A0 0x0AB0 0x8 0x1
+#define MX8ULP_PAD_PTE8__FLEXSPI2_B_DATA2                            0x00A0 0x095C 0x9 0x2
+#define MX8ULP_PAD_PTE8__ENET0_RXD2                                  0x00A0 0x0B00 0xa 0x1
+#define MX8ULP_PAD_PTE8__DBI0_D3                                     0x00A0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE8__EPDC0_BDR0                                  0x00A0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE8__LP_HV_DBG_MUX_3                             0x00A0 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE8__DEBUG_MUX1_19                               0x00A0 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE9__PTE9                                        0x00A4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE9__FXIO1_D14                                   0x00A4 0x0854 0x2 0x1
+#define MX8ULP_PAD_PTE9__LPSPI4_PCS2                                 0x00A4 0x08FC 0x3 0x2
+#define MX8ULP_PAD_PTE9__LPUART6_RTS_B                               0x00A4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE9__LPI2C6_SDA                                  0x00A4 0x09BC 0x5 0x1
+#define MX8ULP_PAD_PTE9__TPM4_CH1                                    0x00A4 0x0808 0x6 0x1
+#define MX8ULP_PAD_PTE9__I2S6_RXD3                                   0x00A4 0x0B40 0x7 0x2
+#define MX8ULP_PAD_PTE9__SDHC2_D7                                    0x00A4 0x0AB4 0x8 0x1
+#define MX8ULP_PAD_PTE9__FLEXSPI2_B_DATA1                            0x00A4 0x0958 0x9 0x2
+#define MX8ULP_PAD_PTE9__ENET0_1588_TMR3                             0x00A4 0x0AE0 0xa 0x1
+#define MX8ULP_PAD_PTE9__DBI0_D4                                     0x00A4 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE9__EPDC0_VCOM1                                 0x00A4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE9__LP_HV_DBG_MUX_4                             0x00A4 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE9__DEBUG_MUX1_20                               0x00A4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE10__PTE10                                      0x00A8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE10__FXIO1_D13                                  0x00A8 0x0850 0x2 0x1
+#define MX8ULP_PAD_PTE10__LPSPI4_PCS3                                0x00A8 0x0900 0x3 0x2
+#define MX8ULP_PAD_PTE10__LPUART6_TX                                 0x00A8 0x09D4 0x4 0x1
+#define MX8ULP_PAD_PTE10__I3C2_SCL                                   0x00A8 0x08BC 0x5 0x1
+#define MX8ULP_PAD_PTE10__TPM4_CH2                                   0x00A8 0x080C 0x6 0x1
+#define MX8ULP_PAD_PTE10__I2S6_TX_BCLK                               0x00A8 0x0B4C 0x7 0x2
+#define MX8ULP_PAD_PTE10__SDHC2_DQS                                  0x00A8 0x0AB8 0x8 0x1
+#define MX8ULP_PAD_PTE10__FLEXSPI2_B_DATA0                           0x00A8 0x0954 0x9 0x2
+#define MX8ULP_PAD_PTE10__ENET0_1588_TMR2                            0x00A8 0x0ADC 0xa 0x1
+#define MX8ULP_PAD_PTE10__DBI0_D5                                    0x00A8 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE10__EPDC0_VCOM0                                0x00A8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE10__LP_HV_DBG_MUX_5                            0x00A8 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE10__DEBUG_MUX1_21                              0x00A8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE11__PTE11                                      0x00AC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE11__FXIO1_D12                                  0x00AC 0x084C 0x2 0x1
+#define MX8ULP_PAD_PTE11__SPDIF_OUT1                                 0x00AC 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE11__LPUART6_RX                                 0x00AC 0x09D0 0x4 0x1
+#define MX8ULP_PAD_PTE11__I3C2_SDA                                   0x00AC 0x08C0 0x5 0x1
+#define MX8ULP_PAD_PTE11__TPM4_CH3                                   0x00AC 0x0810 0x6 0x1
+#define MX8ULP_PAD_PTE11__I2S6_TX_FS                                 0x00AC 0x0B50 0x7 0x2
+#define MX8ULP_PAD_PTE11__FLEXSPI2_B_SCLK_B                          0x00AC 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE11__FLEXSPI2_B_SS0_B                           0x00AC 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE11__ENET0_1588_TMR1                            0x00AC 0x0AD8 0xa 0x1
+#define MX8ULP_PAD_PTE11__DBI0_D6                                    0x00AC 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE11__EPDC0_PWRCTRL0                             0x00AC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE11__LP_HV_DBG_MUX_6                            0x00AC 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE12__PTE12                                      0x00B0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE12__FXIO1_D11                                  0x00B0 0x0848 0x2 0x1
+#define MX8ULP_PAD_PTE12__LPSPI4_SIN                                 0x00B0 0x0908 0x3 0x2
+#define MX8ULP_PAD_PTE12__LPUART7_CTS_B                              0x00B0 0x09D8 0x4 0x1
+#define MX8ULP_PAD_PTE12__LPI2C7_SCL                                 0x00B0 0x09C4 0x5 0x1
+#define MX8ULP_PAD_PTE12__TPM4_CH4                                   0x00B0 0x0814 0x6 0x1
+#define MX8ULP_PAD_PTE12__I2S6_TXD0                                  0x00B0 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE12__SDHC2_RESET_B                              0x00B0 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE12__FLEXSPI2_B_SS1_B                           0x00B0 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE12__ENET0_1588_TMR0                            0x00B0 0x0AD4 0xa 0x1
+#define MX8ULP_PAD_PTE12__DBI0_D7                                    0x00B0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE12__EPDC0_PWRCTRL1                             0x00B0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE12__WUU1_P5                                    0x00B0 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE13__PTE13                                      0x00B4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE13__FXIO1_D10                                  0x00B4 0x0844 0x2 0x1
+#define MX8ULP_PAD_PTE13__LPSPI4_SOUT                                0x00B4 0x090C 0x3 0x2
+#define MX8ULP_PAD_PTE13__LPUART7_RTS_B                              0x00B4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE13__LPI2C7_SDA                                 0x00B4 0x09C8 0x5 0x1
+#define MX8ULP_PAD_PTE13__TPM4_CH5                                   0x00B4 0x0818 0x6 0x1
+#define MX8ULP_PAD_PTE13__I2S6_TXD1                                  0x00B4 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE13__SDHC1_WP                                   0x00B4 0x0A88 0x8 0x2
+#define MX8ULP_PAD_PTE13__ENET0_1588_CLKIN                           0x00B4 0x0AD0 0xa 0x1
+#define MX8ULP_PAD_PTE13__DBI0_D8                                    0x00B4 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE13__EPDC0_PWRCTRL2                             0x00B4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE13__LP_HV_DBG_MUX_7                            0x00B4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE14__PTE14                                      0x00B8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE14__FXIO1_D9                                   0x00B8 0x08B8 0x2 0x1
+#define MX8ULP_PAD_PTE14__LPSPI4_SCK                                 0x00B8 0x0904 0x3 0x2
+#define MX8ULP_PAD_PTE14__LPUART7_TX                                 0x00B8 0x09E0 0x4 0x1
+#define MX8ULP_PAD_PTE14__LPI2C7_HREQ                                0x00B8 0x09C0 0x5 0x1
+#define MX8ULP_PAD_PTE14__TPM5_CLKIN                                 0x00B8 0x0838 0x6 0x1
+#define MX8ULP_PAD_PTE14__I2S6_TXD2                                  0x00B8 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE14__SDHC1_CD                                   0x00B8 0x0A58 0x8 0x2
+#define MX8ULP_PAD_PTE14__ENET0_MDIO                                 0x00B8 0x0AF0 0xa 0x1
+#define MX8ULP_PAD_PTE14__DBI0_D9                                    0x00B8 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE14__EPDC0_PWRCTRL3                             0x00B8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE14__LP_HV_DBG_MUX_8                            0x00B8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE15__PTE15                                      0x00BC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE15__FXIO1_D8                                   0x00BC 0x08B4 0x2 0x1
+#define MX8ULP_PAD_PTE15__LPSPI4_PCS0                                0x00BC 0x08F4 0x3 0x2
+#define MX8ULP_PAD_PTE15__LPUART7_RX                                 0x00BC 0x09DC 0x4 0x1
+#define MX8ULP_PAD_PTE15__I3C2_PUR                                   0x00BC 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTE15__TPM5_CH0                                   0x00BC 0x0820 0x6 0x1
+#define MX8ULP_PAD_PTE15__I2S6_TXD3                                  0x00BC 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE15__MQS1_LEFT                                  0x00BC 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE15__ENET0_MDC                                  0x00BC 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE15__DBI0_D10                                   0x00BC 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE15__EPDC0_PWRCOM                               0x00BC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE15__WUU1_P6                                    0x00BC 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE16__PTE16                                      0x00C0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE16__FXIO1_D7                                   0x00C0 0x08B0 0x2 0x1
+#define MX8ULP_PAD_PTE16__LPSPI5_PCS1                                0x00C0 0x0914 0x3 0x1
+#define MX8ULP_PAD_PTE16__LPUART4_CTS_B                              0x00C0 0x08DC 0x4 0x2
+#define MX8ULP_PAD_PTE16__LPI2C4_SCL                                 0x00C0 0x08C8 0x5 0x2
+#define MX8ULP_PAD_PTE16__TPM5_CH1                                   0x00C0 0x0824 0x6 0x1
+#define MX8ULP_PAD_PTE16__MQS1_LEFT                                  0x00C0 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE16__MQS1_RIGHT                                 0x00C0 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE16__USB0_ID                                    0x00C0 0x0AC8 0x9 0x2
+#define MX8ULP_PAD_PTE16__ENET0_TXEN                                 0x00C0 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE16__DBI0_D11                                   0x00C0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE16__EPDC0_PWRIRQ                               0x00C0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE16__WDOG3_RST                                  0x00C0 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE16__LP_HV_DBG_MUX_9                            0x00C0 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE17__PTE17                                      0x00C4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE17__FXIO1_D6                                   0x00C4 0x08AC 0x2 0x1
+#define MX8ULP_PAD_PTE17__LPSPI5_PCS2                                0x00C4 0x0918 0x3 0x1
+#define MX8ULP_PAD_PTE17__LPUART4_RTS_B                              0x00C4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE17__LPI2C4_SDA                                 0x00C4 0x08CC 0x5 0x2
+#define MX8ULP_PAD_PTE17__MQS1_RIGHT                                 0x00C4 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE17__SDHC1_VS                                   0x00C4 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE17__USB0_PWR                                   0x00C4 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE17__ENET0_RXER                                 0x00C4 0x0B08 0xa 0x1
+#define MX8ULP_PAD_PTE17__DBI0_D12                                   0x00C4 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE17__EPDC0_PWRSTAT                              0x00C4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE17__LP_HV_DBG_MUX_10                           0x00C4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE18__PTE18                                      0x00C8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE18__FXIO1_D5                                   0x00C8 0x08A8 0x2 0x1
+#define MX8ULP_PAD_PTE18__LPSPI5_PCS3                                0x00C8 0x091C 0x3 0x1
+#define MX8ULP_PAD_PTE18__LPUART4_TX                                 0x00C8 0x08E4 0x4 0x2
+#define MX8ULP_PAD_PTE18__LPI2C4_HREQ                                0x00C8 0x08C4 0x5 0x2
+#define MX8ULP_PAD_PTE18__I2S7_TX_BCLK                               0x00C8 0x0B6C 0x7 0x2
+#define MX8ULP_PAD_PTE18__USB0_OC                                    0x00C8 0x0AC0 0x9 0x2
+#define MX8ULP_PAD_PTE18__ENET0_CRS_DV                               0x00C8 0x0AEC 0xa 0x1
+#define MX8ULP_PAD_PTE18__DBI0_D13                                   0x00C8 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE18__EPDC0_PWRWAKE                              0x00C8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE18__LP_HV_DBG_MUX_11                           0x00C8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE19__PTE19                                      0x00CC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE19__FXIO1_D4                                   0x00CC 0x08A4 0x2 0x1
+#define MX8ULP_PAD_PTE19__LPUART4_RX                                 0x00CC 0x08E0 0x4 0x2
+#define MX8ULP_PAD_PTE19__LPI2C5_HREQ                                0x00CC 0x08D0 0x5 0x2
+#define MX8ULP_PAD_PTE19__I3C2_PUR                                   0x00CC 0x0000 0x6 0x0
+#define MX8ULP_PAD_PTE19__I2S7_TX_FS                                 0x00CC 0x0B70 0x7 0x2
+#define MX8ULP_PAD_PTE19__USB1_PWR                                   0x00CC 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE19__ENET0_REFCLK                               0x00CC 0x0AF4 0xa 0x1
+#define MX8ULP_PAD_PTE19__DBI0_D14                                   0x00CC 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE19__EPDC0_GDCLK                                0x00CC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE19__WUU1_P7                                    0x00CC 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE20__PTE20                                      0x00D0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE20__FXIO1_D3                                   0x00D0 0x0898 0x2 0x1
+#define MX8ULP_PAD_PTE20__LPSPI5_SIN                                 0x00D0 0x0924 0x3 0x1
+#define MX8ULP_PAD_PTE20__LPUART5_CTS_B                              0x00D0 0x08E8 0x4 0x2
+#define MX8ULP_PAD_PTE20__LPI2C5_SCL                                 0x00D0 0x08D4 0x5 0x2
+#define MX8ULP_PAD_PTE20__I2S7_TXD0                                  0x00D0 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE20__USB1_OC                                    0x00D0 0x0AC4 0x9 0x2
+#define MX8ULP_PAD_PTE20__ENET0_RXD1                                 0x00D0 0x0AFC 0xa 0x1
+#define MX8ULP_PAD_PTE20__DBI0_D15                                   0x00D0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE20__EPDC0_GDOE                                 0x00D0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE20__LP_HV_DBG_MUX_12                           0x00D0 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE21__PTE21                                      0x00D4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE21__FXIO1_D2                                   0x00D4 0x086C 0x2 0x1
+#define MX8ULP_PAD_PTE21__LPSPI5_SOUT                                0x00D4 0x0928 0x3 0x1
+#define MX8ULP_PAD_PTE21__LPUART5_RTS_B                              0x00D4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE21__LPI2C5_SDA                                 0x00D4 0x08D8 0x5 0x2
+#define MX8ULP_PAD_PTE21__TPM6_CLKIN                                 0x00D4 0x0994 0x6 0x1
+#define MX8ULP_PAD_PTE21__I2S7_TXD1                                  0x00D4 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE21__USB1_ID                                    0x00D4 0x0ACC 0x9 0x2
+#define MX8ULP_PAD_PTE21__ENET0_RXD0                                 0x00D4 0x0AF8 0xa 0x1
+#define MX8ULP_PAD_PTE21__EPDC0_GDRL                                 0x00D4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE21__WDOG4_RST                                  0x00D4 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE21__LP_HV_DBG_MUX_13                           0x00D4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE22__PTE22                                      0x00D8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE22__FXIO1_D1                                   0x00D8 0x0840 0x2 0x1
+#define MX8ULP_PAD_PTE22__LPSPI5_SCK                                 0x00D8 0x0920 0x3 0x1
+#define MX8ULP_PAD_PTE22__LPUART5_TX                                 0x00D8 0x08F0 0x4 0x2
+#define MX8ULP_PAD_PTE22__I3C2_SCL                                   0x00D8 0x08BC 0x5 0x2
+#define MX8ULP_PAD_PTE22__TPM6_CH0                                   0x00D8 0x097C 0x6 0x1
+#define MX8ULP_PAD_PTE22__I2S7_TXD2                                  0x00D8 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE22__EXT_AUD_MCLK3                              0x00D8 0x0B14 0x9 0x5
+#define MX8ULP_PAD_PTE22__ENET0_TXD1                                 0x00D8 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE22__EPDC0_SDOED                                0x00D8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE22__CLKOUT2                                    0x00D8 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE22__LP_HV_DBG_MUX_14                           0x00D8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE23__PTE23                                      0x00DC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE23__FXIO1_D0                                   0x00DC 0x083C 0x2 0x1
+#define MX8ULP_PAD_PTE23__LPSPI5_PCS0                                0x00DC 0x0910 0x3 0x1
+#define MX8ULP_PAD_PTE23__LPUART5_RX                                 0x00DC 0x08EC 0x4 0x2
+#define MX8ULP_PAD_PTE23__I3C2_SDA                                   0x00DC 0x08C0 0x5 0x2
+#define MX8ULP_PAD_PTE23__TPM6_CH1                                   0x00DC 0x0980 0x6 0x1
+#define MX8ULP_PAD_PTE23__I2S7_TXD3                                  0x00DC 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE23__EXT_AUD_MCLK2                              0x00DC 0x0800 0x9 0x1
+#define MX8ULP_PAD_PTE23__ENET0_TXD0                                 0x00DC 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE23__EPDC0_SDOEZ                                0x00DC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE23__CLKOUT1                                    0x00DC 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE23__LP_HV_DBG_MUX_15                           0x00DC 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF0__PTF0                                        0x0100 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF0__FXIO1_D0                                    0x0100 0x083C 0x2 0x2
+#define MX8ULP_PAD_PTF0__LPUART6_CTS_B                               0x0100 0x09CC 0x4 0x2
+#define MX8ULP_PAD_PTF0__LPI2C6_SCL                                  0x0100 0x09B8 0x5 0x2
+#define MX8ULP_PAD_PTF0__I2S7_RX_BCLK                                0x0100 0x0B64 0x7 0x2
+#define MX8ULP_PAD_PTF0__SDHC1_D1                                    0x0100 0x0A68 0x8 0x2
+#define MX8ULP_PAD_PTF0__ENET0_RXD1                                  0x0100 0x0AFC 0x9 0x2
+#define MX8ULP_PAD_PTF0__USB1_ID                                     0x0100 0x0ACC 0xa 0x3
+#define MX8ULP_PAD_PTF0__EPDC0_SDOE                                  0x0100 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF0__DPI0_D23                                    0x0100 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF0__WUU1_P8                                     0x0100 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF1__PTF1                                        0x0104 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF1__FXIO1_D1                                    0x0104 0x0840 0x2 0x2
+#define MX8ULP_PAD_PTF1__LPUART6_RTS_B                               0x0104 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF1__LPI2C6_SDA                                  0x0104 0x09BC 0x5 0x2
+#define MX8ULP_PAD_PTF1__I2S7_RX_FS                                  0x0104 0x0B68 0x7 0x2
+#define MX8ULP_PAD_PTF1__SDHC1_D0                                    0x0104 0x0A64 0x8 0x2
+#define MX8ULP_PAD_PTF1__ENET0_RXD0                                  0x0104 0x0AF8 0x9 0x2
+#define MX8ULP_PAD_PTF1__LP_HV_DBG_MUX_16                            0x0104 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF1__EPDC0_SDSHR                                 0x0104 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF1__DPI0_D22                                    0x0104 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF1__WDOG3_RST                                   0x0104 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF1__DEBUG_MUX0_16                               0x0104 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF1__DEBUG_MUX1_22                               0x0104 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF2__PTF2                                        0x0108 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF2__FXIO1_D2                                    0x0108 0x086C 0x2 0x2
+#define MX8ULP_PAD_PTF2__LPUART6_TX                                  0x0108 0x09D4 0x4 0x2
+#define MX8ULP_PAD_PTF2__LPI2C6_HREQ                                 0x0108 0x09B4 0x5 0x2
+#define MX8ULP_PAD_PTF2__I2S7_RXD0                                   0x0108 0x0B54 0x7 0x2
+#define MX8ULP_PAD_PTF2__SDHC1_CLK                                   0x0108 0x0A5C 0x8 0x2
+#define MX8ULP_PAD_PTF2__ENET0_TXD1                                  0x0108 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF2__USB0_ID                                     0x0108 0x0AC8 0xa 0x3
+#define MX8ULP_PAD_PTF2__EPDC0_SDCE9                                 0x0108 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF2__DPI0_D21                                    0x0108 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF2__LP_HV_DBG_MUX_17                            0x0108 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF2__DEBUG_MUX0_17                               0x0108 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF2__DEBUG_MUX1_23                               0x0108 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF3__PTF3                                        0x010C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF3__FXIO1_D3                                    0x010C 0x0898 0x2 0x2
+#define MX8ULP_PAD_PTF3__LPUART6_RX                                  0x010C 0x09D0 0x4 0x2
+#define MX8ULP_PAD_PTF3__LPI2C7_HREQ                                 0x010C 0x09C0 0x5 0x2
+#define MX8ULP_PAD_PTF3__I2S7_RXD1                                   0x010C 0x0B58 0x7 0x2
+#define MX8ULP_PAD_PTF3__SDHC1_CMD                                   0x010C 0x0A60 0x8 0x2
+#define MX8ULP_PAD_PTF3__ENET0_TXD0                                  0x010C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF3__USB0_PWR                                    0x010C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF3__EPDC0_SDCE8                                 0x010C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF3__DPI0_D20                                    0x010C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF3__WUU1_P9                                     0x010C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF3__DEBUG_MUX1_24                               0x010C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF4__PTF4                                        0x0110 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF4__FXIO1_D4                                    0x0110 0x08A4 0x2 0x2
+#define MX8ULP_PAD_PTF4__LPSPI4_PCS1                                 0x0110 0x08F8 0x3 0x3
+#define MX8ULP_PAD_PTF4__LPUART7_CTS_B                               0x0110 0x09D8 0x4 0x2
+#define MX8ULP_PAD_PTF4__LPI2C7_SCL                                  0x0110 0x09C4 0x5 0x2
+#define MX8ULP_PAD_PTF4__TPM7_CLKIN                                  0x0110 0x09B0 0x6 0x1
+#define MX8ULP_PAD_PTF4__I2S7_RXD2                                   0x0110 0x0B5C 0x7 0x2
+#define MX8ULP_PAD_PTF4__SDHC1_D3                                    0x0110 0x0A70 0x8 0x2
+#define MX8ULP_PAD_PTF4__ENET0_TXEN                                  0x0110 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF4__USB0_OC                                     0x0110 0x0AC0 0xa 0x3
+#define MX8ULP_PAD_PTF4__EPDC0_SDCE7                                 0x0110 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF4__DPI0_D19                                    0x0110 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF4__WUU1_P10                                    0x0110 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF4__DEBUG_MUX1_25                               0x0110 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF5__PTF5                                        0x0114 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF5__FXIO1_D5                                    0x0114 0x08A8 0x2 0x2
+#define MX8ULP_PAD_PTF5__LPSPI4_PCS2                                 0x0114 0x08FC 0x3 0x3
+#define MX8ULP_PAD_PTF5__LPUART7_RTS_B                               0x0114 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF5__LPI2C7_SDA                                  0x0114 0x09C8 0x5 0x2
+#define MX8ULP_PAD_PTF5__TPM7_CH0                                    0x0114 0x0998 0x6 0x1
+#define MX8ULP_PAD_PTF5__I2S7_RXD3                                   0x0114 0x0B60 0x7 0x2
+#define MX8ULP_PAD_PTF5__SDHC1_D2                                    0x0114 0x0A6C 0x8 0x2
+#define MX8ULP_PAD_PTF5__ENET0_RXER                                  0x0114 0x0B08 0x9 0x2
+#define MX8ULP_PAD_PTF5__USB1_PWR                                    0x0114 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF5__EPDC0_SDCE6                                 0x0114 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF5__DPI0_D18                                    0x0114 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF5__LP_HV_DBG_MUX_18                            0x0114 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF5__DEBUG_MUX0_18                               0x0114 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF5__DEBUG_MUX1_26                               0x0114 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF6__LP_HV_DBG_MUX_19                            0x0118 0x0000 0x0 0x0
+#define MX8ULP_PAD_PTF6__PTF6                                        0x0118 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF6__FXIO1_D6                                    0x0118 0x08AC 0x2 0x2
+#define MX8ULP_PAD_PTF6__LPSPI4_PCS3                                 0x0118 0x0900 0x3 0x3
+#define MX8ULP_PAD_PTF6__LPUART7_TX                                  0x0118 0x09E0 0x4 0x2
+#define MX8ULP_PAD_PTF6__I3C2_SCL                                    0x0118 0x08BC 0x5 0x3
+#define MX8ULP_PAD_PTF6__TPM7_CH1                                    0x0118 0x099C 0x6 0x1
+#define MX8ULP_PAD_PTF6__I2S7_MCLK                                   0x0118 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF6__SDHC1_D4                                    0x0118 0x0A74 0x8 0x2
+#define MX8ULP_PAD_PTF6__ENET0_CRS_DV                                0x0118 0x0AEC 0x9 0x2
+#define MX8ULP_PAD_PTF6__USB1_OC                                     0x0118 0x0AC4 0xa 0x3
+#define MX8ULP_PAD_PTF6__EPDC0_SDCE5                                 0x0118 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF6__DPI0_D17                                    0x0118 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF6__WDOG4_RST                                   0x0118 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF6__DEBUG_MUX0_19                               0x0118 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF6__DEBUG_MUX1_27                               0x0118 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF7__PTF7                                        0x011C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF7__FXIO1_D7                                    0x011C 0x08B0 0x2 0x2
+#define MX8ULP_PAD_PTF7__LPUART7_RX                                  0x011C 0x09DC 0x4 0x2
+#define MX8ULP_PAD_PTF7__I3C2_SDA                                    0x011C 0x08C0 0x5 0x3
+#define MX8ULP_PAD_PTF7__TPM7_CH2                                    0x011C 0x09A0 0x6 0x1
+#define MX8ULP_PAD_PTF7__MQS1_LEFT                                   0x011C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF7__SDHC1_D5                                    0x011C 0x0A78 0x8 0x2
+#define MX8ULP_PAD_PTF7__ENET0_REFCLK                                0x011C 0x0AF4 0x9 0x2
+#define MX8ULP_PAD_PTF7__TRACE0_D15                                  0x011C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF7__EPDC0_SDCE4                                 0x011C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF7__DPI0_D16                                    0x011C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF7__WUU1_P11                                    0x011C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF7__DEBUG_MUX1_28                               0x011C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF8__PTF8                                        0x0120 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF8__FXIO1_D8                                    0x0120 0x08B4 0x2 0x2
+#define MX8ULP_PAD_PTF8__LPSPI4_SIN                                  0x0120 0x0908 0x3 0x3
+#define MX8ULP_PAD_PTF8__LPUART4_CTS_B                               0x0120 0x08DC 0x4 0x3
+#define MX8ULP_PAD_PTF8__LPI2C4_SCL                                  0x0120 0x08C8 0x5 0x3
+#define MX8ULP_PAD_PTF8__TPM7_CH3                                    0x0120 0x09A4 0x6 0x1
+#define MX8ULP_PAD_PTF8__MQS1_RIGHT                                  0x0120 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF8__SDHC1_D6                                    0x0120 0x0A7C 0x8 0x2
+#define MX8ULP_PAD_PTF8__ENET0_MDIO                                  0x0120 0x0AF0 0x9 0x2
+#define MX8ULP_PAD_PTF8__TRACE0_D14                                  0x0120 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF8__EPDC0_D15                                   0x0120 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF8__DPI0_D15                                    0x0120 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF8__LP_HV_DBG_MUX_24                            0x0120 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF8__DEBUG_MUX1_29                               0x0120 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF9__PTF9                                        0x0124 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF9__FXIO1_D9                                    0x0124 0x08B8 0x2 0x2
+#define MX8ULP_PAD_PTF9__LPSPI4_SOUT                                 0x0124 0x090C 0x3 0x3
+#define MX8ULP_PAD_PTF9__LPUART4_RTS_B                               0x0124 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF9__LPI2C4_SDA                                  0x0124 0x08CC 0x5 0x3
+#define MX8ULP_PAD_PTF9__TPM7_CH4                                    0x0124 0x09A8 0x6 0x1
+#define MX8ULP_PAD_PTF9__EXT_AUD_MCLK2                               0x0124 0x0800 0x7 0x2
+#define MX8ULP_PAD_PTF9__SDHC1_D7                                    0x0124 0x0A80 0x8 0x2
+#define MX8ULP_PAD_PTF9__ENET0_MDC                                   0x0124 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF9__TRACE0_D13                                  0x0124 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF9__EPDC0_D14                                   0x0124 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF9__DPI0_D14                                    0x0124 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF9__LP_HV_DBG_MUX_25                            0x0124 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF9__DEBUG_MUX1_30                               0x0124 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF10__LP_HV_DBG_MUX_26                           0x0128 0x0000 0x0 0x0
+#define MX8ULP_PAD_PTF10__PTF10                                      0x0128 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF10__FXIO1_D10                                  0x0128 0x0844 0x2 0x2
+#define MX8ULP_PAD_PTF10__LPSPI4_SCK                                 0x0128 0x0904 0x3 0x3
+#define MX8ULP_PAD_PTF10__LPUART4_TX                                 0x0128 0x08E4 0x4 0x3
+#define MX8ULP_PAD_PTF10__LPI2C4_HREQ                                0x0128 0x08C4 0x5 0x3
+#define MX8ULP_PAD_PTF10__TPM7_CH5                                   0x0128 0x09AC 0x6 0x1
+#define MX8ULP_PAD_PTF10__I2S4_RX_BCLK                               0x0128 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF10__SDHC1_DQS                                  0x0128 0x0A84 0x8 0x2
+#define MX8ULP_PAD_PTF10__ENET0_1588_CLKIN                           0x0128 0x0AD0 0x9 0x2
+#define MX8ULP_PAD_PTF10__TRACE0_D12                                 0x0128 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF10__EPDC0_D13                                  0x0128 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF10__DPI0_D13                                   0x0128 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF10__DEBUG_MUX0_20                              0x0128 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF10__DEBUG_MUX1_31                              0x0128 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF11__PTF11                                      0x012C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF11__FXIO1_D11                                  0x012C 0x0848 0x2 0x2
+#define MX8ULP_PAD_PTF11__LPSPI4_PCS0                                0x012C 0x08F4 0x3 0x3
+#define MX8ULP_PAD_PTF11__LPUART4_RX                                 0x012C 0x08E0 0x4 0x3
+#define MX8ULP_PAD_PTF11__TPM4_CLKIN                                 0x012C 0x081C 0x6 0x2
+#define MX8ULP_PAD_PTF11__I2S4_RX_FS                                 0x012C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF11__SDHC1_RESET_B                              0x012C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF11__ENET0_1588_TMR0                            0x012C 0x0AD4 0x9 0x2
+#define MX8ULP_PAD_PTF11__TRACE0_D11                                 0x012C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF11__EPDC0_D12                                  0x012C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF11__DPI0_D12                                   0x012C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF11__LP_HV_DBG_MUX_27                           0x012C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF11__DEBUG_MUX1_32                              0x012C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF12__PTF12                                      0x0130 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF12__FXIO1_D12                                  0x0130 0x084C 0x2 0x2
+#define MX8ULP_PAD_PTF12__LPSPI5_PCS1                                0x0130 0x0914 0x3 0x2
+#define MX8ULP_PAD_PTF12__LPUART5_CTS_B                              0x0130 0x08E8 0x4 0x3
+#define MX8ULP_PAD_PTF12__LPI2C5_SCL                                 0x0130 0x08D4 0x5 0x3
+#define MX8ULP_PAD_PTF12__TPM4_CH0                                   0x0130 0x0804 0x6 0x2
+#define MX8ULP_PAD_PTF12__I2S4_RXD0                                  0x0130 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF12__SDHC2_WP                                   0x0130 0x0ABC 0x8 0x1
+#define MX8ULP_PAD_PTF12__ENET0_1588_TMR1                            0x0130 0x0AD8 0x9 0x2
+#define MX8ULP_PAD_PTF12__TRACE0_D10                                 0x0130 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF12__EPDC0_D11                                  0x0130 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF12__DPI0_D11                                   0x0130 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF12__LP_HV_DBG_MUX_28                           0x0130 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF12__DEBUG_MUX1_33                              0x0130 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF13__PTF13                                      0x0134 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF13__FXIO1_D13                                  0x0134 0x0850 0x2 0x2
+#define MX8ULP_PAD_PTF13__LPSPI5_PCS2                                0x0134 0x0918 0x3 0x2
+#define MX8ULP_PAD_PTF13__LPUART5_RTS_B                              0x0134 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF13__LPI2C5_SDA                                 0x0134 0x08D8 0x5 0x3
+#define MX8ULP_PAD_PTF13__TPM4_CH1                                   0x0134 0x0808 0x6 0x2
+#define MX8ULP_PAD_PTF13__I2S4_RXD1                                  0x0134 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF13__SDHC2_CD                                   0x0134 0x0A8C 0x8 0x1
+#define MX8ULP_PAD_PTF13__ENET0_1588_TMR2                            0x0134 0x0ADC 0x9 0x2
+#define MX8ULP_PAD_PTF13__TRACE0_D9                                  0x0134 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF13__EPDC0_D10                                  0x0134 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF13__DPI0_D10                                   0x0134 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF13__DEBUG_MUX0_21                              0x0134 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF13__LP_HV_DBG_MUX_29                           0x0134 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF14__PTF14                                      0x0138 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF14__FXIO1_D14                                  0x0138 0x0854 0x2 0x2
+#define MX8ULP_PAD_PTF14__LPSPI5_PCS3                                0x0138 0x091C 0x3 0x2
+#define MX8ULP_PAD_PTF14__LPUART5_TX                                 0x0138 0x08F0 0x4 0x3
+#define MX8ULP_PAD_PTF14__LPI2C5_HREQ                                0x0138 0x08D0 0x5 0x3
+#define MX8ULP_PAD_PTF14__TPM4_CH2                                   0x0138 0x080C 0x6 0x2
+#define MX8ULP_PAD_PTF14__I2S4_MCLK                                  0x0138 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF14__SDHC2_VS                                   0x0138 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF14__ENET0_1588_TMR3                            0x0138 0x0AE0 0x9 0x2
+#define MX8ULP_PAD_PTF14__TRACE0_D8                                  0x0138 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF14__EPDC0_D9                                   0x0138 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF14__DPI0_D9                                    0x0138 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF14__DEBUG_MUX0_22                              0x0138 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF14__LP_HV_DBG_MUX_30                           0x0138 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF15__PTF15                                      0x013C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF15__FXIO1_D15                                  0x013C 0x0858 0x2 0x2
+#define MX8ULP_PAD_PTF15__LPUART5_RX                                 0x013C 0x08EC 0x4 0x3
+#define MX8ULP_PAD_PTF15__TPM4_CH3                                   0x013C 0x0810 0x6 0x2
+#define MX8ULP_PAD_PTF15__I2S4_TX_BCLK                               0x013C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF15__SDHC2_D1                                   0x013C 0x0A9C 0x8 0x3
+#define MX8ULP_PAD_PTF15__ENET0_RXD2                                 0x013C 0x0B00 0x9 0x2
+#define MX8ULP_PAD_PTF15__TRACE0_D7                                  0x013C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF15__EPDC0_D8                                   0x013C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF15__DPI0_D8                                    0x013C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF15__LP_HV_DBG_MUX_31                           0x013C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF16__PTF16                                      0x0140 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF16__FXIO1_D16                                  0x0140 0x085C 0x2 0x2
+#define MX8ULP_PAD_PTF16__LPSPI5_SIN                                 0x0140 0x0924 0x3 0x2
+#define MX8ULP_PAD_PTF16__LPUART6_CTS_B                              0x0140 0x09CC 0x4 0x3
+#define MX8ULP_PAD_PTF16__LPI2C6_SCL                                 0x0140 0x09B8 0x5 0x3
+#define MX8ULP_PAD_PTF16__TPM4_CH4                                   0x0140 0x0814 0x6 0x2
+#define MX8ULP_PAD_PTF16__I2S4_TX_FS                                 0x0140 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF16__SDHC2_D0                                   0x0140 0x0A98 0x8 0x3
+#define MX8ULP_PAD_PTF16__ENET0_RXD3                                 0x0140 0x0B04 0x9 0x2
+#define MX8ULP_PAD_PTF16__TRACE0_D6                                  0x0140 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF16__EPDC0_D7                                   0x0140 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF16__DPI0_D7                                    0x0140 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF16__LP_HV_DBG_MUX_32                           0x0140 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF17__PTF17                                      0x0144 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF17__FXIO1_D17                                  0x0144 0x0860 0x2 0x2
+#define MX8ULP_PAD_PTF17__LPSPI5_SOUT                                0x0144 0x0928 0x3 0x2
+#define MX8ULP_PAD_PTF17__LPUART6_RTS_B                              0x0144 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF17__LPI2C6_SDA                                 0x0144 0x09BC 0x5 0x3
+#define MX8ULP_PAD_PTF17__TPM4_CH5                                   0x0144 0x0818 0x6 0x2
+#define MX8ULP_PAD_PTF17__I2S4_TXD0                                  0x0144 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF17__SDHC2_CLK                                  0x0144 0x0A90 0x8 0x3
+#define MX8ULP_PAD_PTF17__ENET0_RXCLK                                0x0144 0x0B0C 0x9 0x2
+#define MX8ULP_PAD_PTF17__TRACE0_D5                                  0x0144 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF17__EPDC0_D6                                   0x0144 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF17__DPI0_D6                                    0x0144 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF17__DEBUG_MUX0_23                              0x0144 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF17__LP_HV_DBG_MUX_33                           0x0144 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF18__PTF18                                      0x0148 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF18__FXIO1_D18                                  0x0148 0x0864 0x2 0x2
+#define MX8ULP_PAD_PTF18__LPSPI5_SCK                                 0x0148 0x0920 0x3 0x2
+#define MX8ULP_PAD_PTF18__LPUART6_TX                                 0x0148 0x09D4 0x4 0x3
+#define MX8ULP_PAD_PTF18__LPI2C6_HREQ                                0x0148 0x09B4 0x5 0x3
+#define MX8ULP_PAD_PTF18__TPM5_CLKIN                                 0x0148 0x0838 0x6 0x2
+#define MX8ULP_PAD_PTF18__I2S4_TXD1                                  0x0148 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF18__SDHC2_CMD                                  0x0148 0x0A94 0x8 0x3
+#define MX8ULP_PAD_PTF18__ENET0_TXD2                                 0x0148 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF18__TRACE0_D4                                  0x0148 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF18__EPDC0_D5                                   0x0148 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF18__DPI0_D5                                    0x0148 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF19__PTF19                                      0x014C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF19__FXIO1_D19                                  0x014C 0x0868 0x2 0x2
+#define MX8ULP_PAD_PTF19__LPSPI5_PCS0                                0x014C 0x0910 0x3 0x2
+#define MX8ULP_PAD_PTF19__LPUART6_RX                                 0x014C 0x09D0 0x4 0x3
+#define MX8ULP_PAD_PTF19__TPM5_CH0                                   0x014C 0x0820 0x6 0x2
+#define MX8ULP_PAD_PTF19__I2S5_RX_BCLK                               0x014C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF19__SDHC2_D3                                   0x014C 0x0AA4 0x8 0x3
+#define MX8ULP_PAD_PTF19__ENET0_TXD3                                 0x014C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF19__TRACE0_D3                                  0x014C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF19__EPDC0_D4                                   0x014C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF19__DPI0_D4                                    0x014C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF20__PTF20                                      0x0150 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF20__FXIO1_D20                                  0x0150 0x0870 0x2 0x2
+#define MX8ULP_PAD_PTF20__LPUART7_CTS_B                              0x0150 0x09D8 0x4 0x3
+#define MX8ULP_PAD_PTF20__LPI2C7_SCL                                 0x0150 0x09C4 0x5 0x3
+#define MX8ULP_PAD_PTF20__TPM5_CH1                                   0x0150 0x0824 0x6 0x2
+#define MX8ULP_PAD_PTF20__I2S5_RX_FS                                 0x0150 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF20__SDHC2_D2                                   0x0150 0x0AA0 0x8 0x3
+#define MX8ULP_PAD_PTF20__ENET0_TXCLK                                0x0150 0x0B10 0x9 0x2
+#define MX8ULP_PAD_PTF20__TRACE0_D2                                  0x0150 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF20__EPDC0_D3                                   0x0150 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF20__DPI0_D3                                    0x0150 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF21__PTF21                                      0x0154 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF21__FXIO1_D21                                  0x0154 0x0874 0x2 0x2
+#define MX8ULP_PAD_PTF21__SPDIF_CLK                                  0x0154 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF21__LPUART7_RTS_B                              0x0154 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF21__LPI2C7_SDA                                 0x0154 0x09C8 0x5 0x3
+#define MX8ULP_PAD_PTF21__TPM6_CLKIN                                 0x0154 0x0994 0x6 0x2
+#define MX8ULP_PAD_PTF21__I2S5_RXD0                                  0x0154 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF21__SDHC2_D4                                   0x0154 0x0AA8 0x8 0x2
+#define MX8ULP_PAD_PTF21__ENET0_CRS                                  0x0154 0x0AE8 0x9 0x2
+#define MX8ULP_PAD_PTF21__TRACE0_D1                                  0x0154 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF21__EPDC0_D2                                   0x0154 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF21__DPI0_D2                                    0x0154 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF22__PTF22                                      0x0158 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF22__FXIO1_D22                                  0x0158 0x0878 0x2 0x2
+#define MX8ULP_PAD_PTF22__SPDIF_IN0                                  0x0158 0x0B74 0x3 0x3
+#define MX8ULP_PAD_PTF22__LPUART7_TX                                 0x0158 0x09E0 0x4 0x3
+#define MX8ULP_PAD_PTF22__LPI2C7_HREQ                                0x0158 0x09C0 0x5 0x3
+#define MX8ULP_PAD_PTF22__TPM6_CH0                                   0x0158 0x097C 0x6 0x2
+#define MX8ULP_PAD_PTF22__I2S5_RXD1                                  0x0158 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF22__SDHC2_D5                                   0x0158 0x0AAC 0x8 0x2
+#define MX8ULP_PAD_PTF22__ENET0_COL                                  0x0158 0x0AE4 0x9 0x2
+#define MX8ULP_PAD_PTF22__TRACE0_D0                                  0x0158 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF22__EPDC0_D1                                   0x0158 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF22__DPI0_D1                                    0x0158 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF23__PTF23                                      0x015C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF23__FXIO1_D23                                  0x015C 0x087C 0x2 0x2
+#define MX8ULP_PAD_PTF23__SPDIF_OUT0                                 0x015C 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF23__LPUART7_RX                                 0x015C 0x09DC 0x4 0x3
+#define MX8ULP_PAD_PTF23__I3C2_PUR                                   0x015C 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTF23__TPM6_CH1                                   0x015C 0x0980 0x6 0x2
+#define MX8ULP_PAD_PTF23__I2S5_RXD2                                  0x015C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF23__SDHC2_D6                                   0x015C 0x0AB0 0x8 0x2
+#define MX8ULP_PAD_PTF23__ENET0_TXER                                 0x015C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF23__TRACE0_CLKOUT                              0x015C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF23__EPDC0_D0                                   0x015C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF23__DPI0_D0                                    0x015C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF24__PTF24                                      0x0160 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF24__FXIO1_D24                                  0x0160 0x0880 0x2 0x2
+#define MX8ULP_PAD_PTF24__SPDIF_IN1                                  0x0160 0x0B78 0x3 0x3
+#define MX8ULP_PAD_PTF24__I3C2_SCL                                   0x0160 0x08BC 0x5 0x4
+#define MX8ULP_PAD_PTF24__I2S5_RXD3                                  0x0160 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF24__SDHC2_D7                                   0x0160 0x0AB4 0x8 0x2
+#define MX8ULP_PAD_PTF24__DBI0_WRX                                   0x0160 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF24__EPDC0_SDCLK                                0x0160 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF24__DPI0_PCLK                                  0x0160 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF24__WUU1_P12                                   0x0160 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF25__PTF25                                      0x0164 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF25__FXIO1_D25                                  0x0164 0x0884 0x2 0x2
+#define MX8ULP_PAD_PTF25__SPDIF_OUT1                                 0x0164 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF25__I3C2_SDA                                   0x0164 0x08C0 0x5 0x4
+#define MX8ULP_PAD_PTF25__TPM7_CH5                                   0x0164 0x09AC 0x6 0x2
+#define MX8ULP_PAD_PTF25__I2S5_MCLK                                  0x0164 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF25__SDHC2_DQS                                  0x0164 0x0AB8 0x8 0x2
+#define MX8ULP_PAD_PTF25__EXT_AUD_MCLK2                              0x0164 0x0800 0x9 0x3
+#define MX8ULP_PAD_PTF25__EPDC0_GDSP                                 0x0164 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF25__DPI0_VSYNC                                 0x0164 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF25__WUU1_P13                                   0x0164 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF26__PTF26                                      0x0168 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF26__FXIO1_D26                                  0x0168 0x0888 0x2 0x2
+#define MX8ULP_PAD_PTF26__SPDIF_IN2                                  0x0168 0x0B7C 0x3 0x3
+#define MX8ULP_PAD_PTF26__TPM7_CLKIN                                 0x0168 0x09B0 0x6 0x2
+#define MX8ULP_PAD_PTF26__I2S5_TX_BCLK                               0x0168 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF26__SDHC2_RESET_B                              0x0168 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF26__EPDC0_SDLE                                 0x0168 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF26__DPI0_HSYNC                                 0x0168 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF26__WUU1_P14                                   0x0168 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF27__PTF27                                      0x016C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF27__FXIO1_D27                                  0x016C 0x088C 0x2 0x2
+#define MX8ULP_PAD_PTF27__SPDIF_OUT2                                 0x016C 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF27__TPM7_CH0                                   0x016C 0x0998 0x6 0x2
+#define MX8ULP_PAD_PTF27__I2S5_TX_FS                                 0x016C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF27__SDHC2_WP                                   0x016C 0x0ABC 0x8 0x2
+#define MX8ULP_PAD_PTF27__EPDC0_SDCE0                                0x016C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF27__DPI0_DE                                    0x016C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF27__WUU1_P15                                   0x016C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF28__PTF28                                      0x0170 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF28__FXIO1_D28                                  0x0170 0x0890 0x2 0x2
+#define MX8ULP_PAD_PTF28__SPDIF_IN3                                  0x0170 0x0B80 0x3 0x3
+#define MX8ULP_PAD_PTF28__TPM7_CH1                                   0x0170 0x099C 0x6 0x2
+#define MX8ULP_PAD_PTF28__I2S5_TXD0                                  0x0170 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF28__SDHC2_CD                                   0x0170 0x0A8C 0x8 0x2
+#define MX8ULP_PAD_PTF28__EPDC0_SDCLK_B                              0x0170 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF28__LP_HV_DBG_MUX_20                           0x0170 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF29__PTF29                                      0x0174 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF29__FXIO1_D29                                  0x0174 0x0894 0x2 0x2
+#define MX8ULP_PAD_PTF29__SPDIF_OUT3                                 0x0174 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF29__TPM7_CH2                                   0x0174 0x09A0 0x6 0x2
+#define MX8ULP_PAD_PTF29__I2S5_TXD1                                  0x0174 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF29__SDHC2_VS                                   0x0174 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF29__EPDC0_SDCE1                                0x0174 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF29__WDOG3_RST                                  0x0174 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF29__LP_HV_DBG_MUX_21                           0x0174 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF30__PTF30                                      0x0178 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF30__FXIO1_D30                                  0x0178 0x089C 0x2 0x2
+#define MX8ULP_PAD_PTF30__TPM7_CH3                                   0x0178 0x09A4 0x6 0x2
+#define MX8ULP_PAD_PTF30__I2S5_TXD2                                  0x0178 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF30__MQS1_LEFT                                  0x0178 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF30__EPDC0_SDCE2                                0x0178 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF30__WDOG4_RST                                  0x0178 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF30__LP_HV_DBG_MUX_22                           0x0178 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF31__PTF31                                      0x017C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF31__FXIO1_D31                                  0x017C 0x08A0 0x2 0x2
+#define MX8ULP_PAD_PTF31__TPM7_CH4                                   0x017C 0x09A8 0x6 0x2
+#define MX8ULP_PAD_PTF31__I2S5_TXD3                                  0x017C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF31__MQS1_RIGHT                                 0x017C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF31__EPDC0_SDCE3                                0x017C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF31__WDOG5_RST                                  0x017C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF31__LP_HV_DBG_MUX_23                           0x017C 0x0000 0xf 0x0
+#define MX8ULP_PAD_BOOT_MODE0__BOOT_MODE0                            0x0400 0x0000 0x0 0x0
+#define MX8ULP_PAD_BOOT_MODE1__BOOT_MODE1                            0x0404 0x0000 0x0 0x0
+
+#endif /* __DTS_IMX8ULP_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
new file mode 100644
index 0000000000..8a6596d5a5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <dt-bindings/clock/imx8ulp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8ulp-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8ulp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpiod;
+		gpio1 = &gpioe;
+		gpio2 = &gpiof;
+		mmc0 = &usdhc0;
+		mmc1 = &usdhc1;
+		mmc2 = &usdhc2;
+		serial0 = &lpuart4;
+		serial1 = &lpuart5;
+		serial2 = &lpuart6;
+		serial3 = &lpuart7;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep: cpu-sleep {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+	};
+
+	gic: interrupt-controller@2d400000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A35_0>, <&A35_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&scmi_sensor 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	frosc: clock-frosc {
+		compatible = "fixed-clock";
+		clock-frequency = <192000000>;
+		clock-output-names = "frosc";
+		#clock-cells = <0>;
+	};
+
+	lposc: clock-lposc {
+		compatible = "fixed-clock";
+		clock-frequency = <1000000>;
+		clock-output-names = "lposc";
+		#clock-cells = <0>;
+	};
+
+	rosc: clock-rosc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "rosc";
+		#clock-cells = <0>;
+	};
+
+	sosc: clock-sosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "sosc";
+		#clock-cells = <0>;
+	};
+
+	sram@2201f000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x2201f000 0x0 0x1000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2201f000 0x1000>;
+
+		scmi_buf: scmi-sram-section@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x400>;
+		};
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0xc20000fe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			shmem = <&scmi_buf>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_sensor: protocol@15 {
+				reg = <0x15>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+	};
+
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx8ulp-cm33";
+		status = "disabled";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>,
+			 <0x60000000 0x0 0x60000000 0x1000000>;
+
+		s4muap: mailbox@27020000 {
+			compatible = "fsl,imx8ulp-mu-s4";
+			reg = <0x27020000 0x10000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		per_bridge3: bus@29000000 {
+			compatible = "simple-bus";
+			reg = <0x29000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mu: mailbox@29220000 {
+				compatible = "fsl,imx8ulp-mu";
+				reg = <0x29220000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu3: mailbox@29230000 {
+				compatible = "fsl,imx8ulp-mu";
+				reg = <0x29230000 0x10000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_MU3_A>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@292a0000 {
+				compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt";
+				reg = <0x292a0000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
+				timeout-sec = <40>;
+			};
+
+			cgc1: clock-controller@292c0000 {
+				compatible = "fsl,imx8ulp-cgc1";
+				reg = <0x292c0000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			pcc3: clock-controller@292d0000 {
+				compatible = "fsl,imx8ulp-pcc3";
+				reg = <0x292d0000 0x10000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			tpm5: tpm@29340000 {
+				compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
+				reg = <0x29340000 0x1000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_TPM5>,
+					 <&pcc3 IMX8ULP_CLK_TPM5>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@29370000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29370000 0x10000>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>,
+					 <&pcc3 IMX8ULP_CLK_LPI2C4>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@29380000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29380000 0x10000>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>,
+					 <&pcc3 IMX8ULP_CLK_LPI2C5>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpuart4: serial@29390000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x29390000 0x1000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPUART4>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart5: serial@293a0000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x293a0000 0x1000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpspi4: spi@293b0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+				reg = <0x293b0000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>,
+					 <&pcc3 IMX8ULP_CLK_LPSPI4>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpspi5: spi@293c0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+				reg = <0x293c0000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>,
+					 <&pcc3 IMX8ULP_CLK_LPSPI5>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		per_bridge4: bus@29800000 {
+			compatible = "simple-bus";
+			reg = <0x29800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pcc4: clock-controller@29800000 {
+				compatible = "fsl,imx8ulp-pcc4";
+				reg = <0x29800000 0x10000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			flexspi2: spi@29810000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>,
+					 <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+				clock-names = "fspi", "fspi_en";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@29840000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29840000 0x10000>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>,
+					 <&pcc4 IMX8ULP_CLK_LPI2C6>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@29850000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29850000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>,
+					 <&pcc4 IMX8ULP_CLK_LPI2C7>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpuart6: serial@29860000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x29860000 0x1000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart7: serial@29870000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x29870000 0x1000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			iomuxc1: pinctrl@298c0000 {
+				compatible = "fsl,imx8ulp-iomuxc1";
+				reg = <0x298c0000 0x10000>;
+			};
+
+			usdhc0: mmc@298d0000 {
+				compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x298d0000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+					 <&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>,
+					 <&pcc4 IMX8ULP_CLK_USDHC0>;
+				clock-names = "ipg", "ahb", "per";
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
+				assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>,
+						  <&pcc4 IMX8ULP_CLK_USDHC0>;
+				assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>;
+				assigned-clock-rates = <389283840>, <389283840>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@298e0000 {
+				compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x298e0000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+					 <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
+					 <&pcc4 IMX8ULP_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
+				assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>,
+						  <&pcc4 IMX8ULP_CLK_USDHC1>;
+				assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+				assigned-clock-rates = <194641920>, <194641920>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@298f0000 {
+				compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x298f0000 0x10000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+					 <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
+					 <&pcc4 IMX8ULP_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
+				assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>,
+						  <&pcc4 IMX8ULP_CLK_USDHC2>;
+				assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+				assigned-clock-rates = <194641920>, <194641920>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			fec: ethernet@29950000 {
+				compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x29950000 0x10000>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "int0";
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
+				status = "disabled";
+			};
+		};
+
+		gpioe: gpio@2d000080 {
+				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+				reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
+					 <&pcc4 IMX8ULP_CLK_PCTLE>;
+				clock-names = "gpio", "port";
+				gpio-ranges = <&iomuxc1 0 32 24>;
+		};
+
+		gpiof: gpio@2d010080 {
+				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+				reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
+					 <&pcc4 IMX8ULP_CLK_PCTLF>;
+				clock-names = "gpio", "port";
+				gpio-ranges = <&iomuxc1 0 64 32>;
+		};
+
+		per_bridge5: bus@2d800000 {
+			compatible = "simple-bus";
+			reg = <0x2d800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			cgc2: clock-controller@2da60000 {
+				compatible = "fsl,imx8ulp-cgc2";
+				reg = <0x2da60000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			pcc5: clock-controller@2da70000 {
+				compatible = "fsl,imx8ulp-pcc5";
+				reg = <0x2da70000 0x10000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+		};
+
+		gpiod: gpio@2e200080 {
+			compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>,
+				 <&pcc5 IMX8ULP_CLK_RGPIOD>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 0 24>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
new file mode 100644
index 0000000000..bc659066e1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+/* Colibri Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog0>;
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>,
+		   <&lsio_gpio5 2 GPIO_ACTIVE_LOW>;
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Colibri SDCard */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
new file mode 100644
index 0000000000..9af769ab8c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	/* fixed crystal dedicated to mcp25xx */
+	clk16m: clock-16mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+};
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
+		    <&pinctrl_lpspi2_cs2>;
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_can_int>;
+		pinctrl-names = "default";
+		clocks = <&clk16m>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
new file mode 100644
index 0000000000..98202a4370
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		enable-active-high;
+		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds_converter &pinctrl_gpio_iris>;
+
+	pinctrl_enable_3v3_vmmc: enable_3v3_vmmc {
+		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x20>;	/* SODIMM 100 */
+	};
+
+	pinctrl_lvds_converter: lcd-lvds {
+		fsl,pins = <IMX8QXP_FLEXCAN1_TX_LSIO_GPIO1_IO18		0x20>,	/* SODIMM  55 */
+			   /* 6B/8B mode. Select LOW - 8B mode (24bit) */
+			   <IMX8QXP_FLEXCAN1_RX_LSIO_GPIO1_IO17		0x20>,	/* SODIMM  63 */
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17		0x20>,	/* SODIMM  95 */
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18	0x20>;	/* SODIMM  99 */
+	};
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	cap-power-off-card;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
new file mode 100644
index 0000000000..8d06925a8e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V";
+	};
+};
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri I2C */
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_iris>;
+
+	pinctrl_gpio_iris: gpioirisgrp {
+		fsl,pins = <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21	0x20>,		/* SODIMM  98 */
+			   <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04		0x20>,		/* SODIMM 133 */
+			   <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25		0x20>,		/* SODIMM 103 */
+			   <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28		0x20>,		/* SODIMM 101 */
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x20>,		/* SODIMM  97 */
+			   <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03	0x06000020>,	/* SODIMM  85 */
+			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26		0x20>;		/* SODIMM  79 */
+	};
+
+	pinctrl_uart1_forceoff: uart1forceoffgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14	0x20>;	/* SODIMM 22 */
+	};
+
+	pinctrl_uart23_forceoff: uart23forceoffgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x20>; /* SODIMM 23 */
+	};
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio3 {
+	/*
+	 * This turns the LVDS transceiver on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled
+	 * in userspace.
+	 */
+	lvds-tx-on-hog {
+		gpio-hog;
+		gpios = <18 0>;
+		output-high;
+	};
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
new file mode 100644
index 0000000000..49d105eb47
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -0,0 +1,778 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = &lpuart3;
+	};
+
+	colibri_gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		status = "disabled";
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/* TODO Analogue Inputs */
+
+/* TODO Cooling maps for DX */
+
+&cpu_alert0 {
+	hysteresis = <2000>;
+	temperature = <90000>;
+	type = "passive";
+};
+
+&cpu_crit0 {
+	hysteresis = <2000>;
+	temperature = <105000>;
+	type = "critical";
+};
+
+/* TODO flexcan1 - 3 */
+
+/* TODO GPU */
+
+/* On-module I2C */
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>;
+	status = "okay";
+
+	/* Touch controller */
+	touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ad7879_int>;
+		reg = <0x2c>;
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
+	};
+};
+
+/* TODO i2c lvds0 accessible on FFC (X2) */
+
+/* TODO i2c lvds1 accessible on FFC (X3) */
+
+/* Colibri I2C */
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+/* TODO Parallel RRB */
+
+/* Colibri UART_B */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <2>;
+		};
+	};
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_68",
+			  "",
+			  "",
+			  "SODIMM_82",
+			  "SODIMM_56",
+			  "SODIMM_28",
+			  "SODIMM_30",
+			  "",
+			  "SODIMM_61",
+			  "SODIMM_103",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_100";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90",
+			  "SODIMM_88",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "SODIMM_6",
+			  "SODIMM_8",
+			  "",
+			  "",
+			  "SODIMM_2",
+			  "SODIMM_4",
+			  "SODIMM_34",
+			  "SODIMM_32",
+			  "SODIMM_63",
+			  "SODIMM_55",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_21",
+			  "SODIMM_19",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_196",
+			  "SODIMM_194",
+			  "SODIMM_186",
+			  "SODIMM_188",
+			  "SODIMM_138";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "SODIMM_23",
+			  "",
+			  "",
+			  "SODIMM_144";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "SODIMM_96",
+			  "SODIMM_75",
+			  "SODIMM_37",
+			  "SODIMM_29",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_69",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_77",
+			  "SODIMM_89",
+			  "SODIMM_93",
+			  "SODIMM_95",
+			  "SODIMM_99",
+			  "SODIMM_105",
+			  "SODIMM_107",
+			  "SODIMM_98",
+			  "SODIMM_102",
+			  "SODIMM_104",
+			  "SODIMM_106";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "SODIMM_129",
+			  "SODIMM_133",
+			  "SODIMM_127",
+			  "SODIMM_131",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_44",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_31",
+			  "SODIMM_47",
+			  "SODIMM_190",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "SODIMM_57",
+			  "SODIMM_65",
+			  "SODIMM_85",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_135",
+			  "SODIMM_137",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184";
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_b>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_c>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_d>;
+	pinctrl-names = "default";
+};
+
+/* TODO MIPI CSI */
+
+/* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */
+
+/* TODO on-module PCIe for Wi-Fi */
+
+/* TODO On-module i2s / Audio */
+
+/* On-module eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_module_3v3>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	disable-wp;
+	no-1-8-v;
+};
+
+/* TODO USB Client/Host */
+
+/* TODO USB Host */
+
+/* TODO VPU Encoder/Decoder */
+
+&iomuxc {
+	/* On-module touch pen-down interrupt */
+	pinctrl_ad7879_int: ad7879intgrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05	0x21>;
+	};
+
+	/* Colibri Analogue Inputs */
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0			0x60>,		/* SODIMM   8 */
+			   <IMX8QXP_ADC_IN1_ADMA_ADC_IN1			0x60>,		/* SODIMM   6 */
+			   <IMX8QXP_ADC_IN4_ADMA_ADC_IN4			0x60>,		/* SODIMM   4 */
+			   <IMX8QXP_ADC_IN5_ADMA_ADC_IN5			0x60>;		/* SODIMM   2 */
+	};
+
+	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
+	/* NOTE: This pingroup conflicts with pingroups
+	 * pinctrl_pwm_b/pinctrl_pwm_c. Don't enable them
+	 * simultaneously.
+	 */
+	pinctrl_atmel_adap: atmeladaptergrp {
+		fsl,pins = <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22			0x21>,		/* SODIMM  30 */
+			   <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21			0x4000021>;	/* SODIMM  28 */
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	pinctrl_atmel_conn: atmelconnectorgrp {
+		fsl,pins = <IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20		0x4000021>,	/* SODIMM 107 */
+			   <IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24		0x21>;		/* SODIMM 106 */
+	};
+
+	pinctrl_can_int: canintgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13			0x40>;		/* SODIMM  73 */
+	};
+
+	pinctrl_csi_ctl: csictlgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14		0x20>,		/* SODIMM  77 */
+			   <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15		0x20>;		/* SODIMM  89 */
+	};
+
+	pinctrl_csi_mclk: csimclkgrp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_CI_PI_MCLK				0xC0000041>;	/* SODIMM  75 / X3-12 */
+	};
+
+	pinctrl_ext_io0: extio0grp {
+		fsl,pins = <IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08		0x06000040>;	/* SODIMM 135 */
+	};
+
+	/* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x61>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT	0x06000061>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x61>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER	0x61>;
+	};
+
+	pinctrl_fec1_sleep: fec1slpgrp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07		0x41>;
+	};
+
+	/* Colibri optional CAN on UART_B RTS/CTS */
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX		0x21>,		/* SODIMM  32 */
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX		0x21>;		/* SODIMM  34 */
+	};
+
+	/* Colibri optional CAN on PS2 */
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX		0x21>,		/* SODIMM  55 */
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX		0x21>;		/* SODIMM  63 */
+	};
+
+	/* Colibri optional CAN on UART_A TXD/RXD */
+	pinctrl_flexcan3: flexcan2grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX		0x21>,		/* SODIMM  35 */
+			   <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX		0x21>;		/* SODIMM  33 */
+	};
+
+	/* Colibri LCD Back-Light GPIO */
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12		0x60>;		/* SODIMM  71 */
+	};
+
+	/* HDMI Hot Plug Detect on FFC (X2) */
+	pinctrl_gpio_hpd: gpiohpdgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31		0x20>;		/* SODIMM 138 */
+	};
+
+	pinctrl_gpiokeys: gpiokeysgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10		0x06700041>;	/* SODIMM  45 */
+	};
+
+	pinctrl_hog0: hog0grp {
+		fsl,pins = <IMX8QXP_CSI_D07_CI_PI_D09				0x61>,		/* SODIMM  65 */
+			   <IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11		0x20>,		/* SODIMM  69 */
+			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26			0x20>,		/* SODIMM  79 */
+			   <IMX8QXP_CSI_D02_CI_PI_D04				0x61>,		/* SODIMM  79 */
+			   <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03		0x06000020>,	/* SODIMM  85 */
+			   <IMX8QXP_CSI_D06_CI_PI_D08				0x61>,		/* SODIMM  85 */
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17			0x20>,		/* SODIMM  95 */
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27			0x20>,		/* SODIMM  97 */
+			   <IMX8QXP_CSI_D03_CI_PI_D05				0x61>,		/* SODIMM  97 */
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18		0x20>,		/* SODIMM  99 */
+			   <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28			0x20>,		/* SODIMM 101 */
+			   <IMX8QXP_CSI_D00_CI_PI_D02				0x61>,		/* SODIMM 101 */
+			   <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25			0x20>,		/* SODIMM 103 */
+			   <IMX8QXP_CSI_D01_CI_PI_D03				0x61>,		/* SODIMM 103 */
+			   <IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19		0x20>,		/* SODIMM 105 */
+			   <IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05			0x20>,		/* SODIMM 127 */
+			   <IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06			0x20>,		/* SODIMM 131 */
+			   <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04			0x20>,		/* SODIMM 133 */
+			   <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00			0x20>,		/* SODIMM  96 */
+			   <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21		0x20>,		/* SODIMM  98 */
+			   <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31			0x20>,		/* SODIMM 100 */
+			   <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22			0x20>,		/* SODIMM 102 */
+			   <IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23		0x20>;		/* SODIMM 104 */
+	};
+
+	pinctrl_hog1: hog1grp {
+		fsl,pins = <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16			0x20>;		/* SODIMM  93 */
+	};
+
+	pinctrl_hog2: hog2grp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01			0x20>;		/* SODIMM  75 */
+	};
+
+	/*
+	 * This pin is used in the SCFW as a UART. Using it from
+	 * Linux would require rewritting the SCFW board file.
+	 */
+	pinctrl_hog_scfw: hogscfwgrp {
+		fsl,pins = <IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03		0x20>;		/* SODIMM 144 */
+	};
+
+	/* On Module I2C */
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL		0x06000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA		0x06000021>;
+	};
+
+	/* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */
+	pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0xc6000020>,	/* SODIMM 140 */
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0xc6000020>;	/* SODIMM 142 */
+	};
+
+	/* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */
+	pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL	0xc6000020>,	/* SODIMM 186 */
+			   <IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA	0xc6000020>;	/* SODIMM 188 */
+	};
+
+	/* Colibri I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL		0x06000021>,	/* SODIMM 196 */
+			   <IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA		0x06000021>;	/* SODIMM 194 */
+	};
+
+	/* Colibri Parallel RGB LCD Interface */
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK			0x60>,		/* SODIMM  56 */
+			   <IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC			0x60>,		/* SODIMM  68 */
+			   <IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC			0x60>,		/* SODIMM  82 */
+			   <IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN			0x40>,		/* SODIMM  44 */
+			   <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19		0x40>,		/* SODIMM  44 */
+			   <IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00			0x60>,		/* SODIMM  76 */
+			   <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21			0x60>,		/* SODIMM  76 */
+			   <IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01			0x60>,		/* SODIMM  70 */
+			   <IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02			0x60>,		/* SODIMM  60 */
+			   <IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03			0x60>,		/* SODIMM  58 */
+			   <IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04			0x60>,		/* SODIMM  78 */
+			   <IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05			0x60>,		/* SODIMM  72 */
+			   <IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06		0x60>,		/* SODIMM  80 */
+			   <IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07		0x60>,		/* SODIMM  46 */
+			   <IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08		0x60>,		/* SODIMM  62 */
+			   <IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09		0x60>,		/* SODIMM  48 */
+			   <IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10			0x60>,		/* SODIMM  74 */
+			   <IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11			0x60>,		/* SODIMM  50 */
+			   <IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12		0x60>,		/* SODIMM  52 */
+			   <IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13			0x60>,		/* SODIMM  54 */
+			   <IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14			0x60>,		/* SODIMM  66 */
+			   <IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15			0x60>,		/* SODIMM  64 */
+			   <IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16			0x60>,		/* SODIMM  57 */
+			   <IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01		0x60>,		/* SODIMM  57 */
+			   <IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17			0x60>;		/* SODIMM  61 */
+	};
+
+	/* Colibri SPI */
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00			0x21>,		/* SODIMM  86 */
+			   <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO			0x06000040>,	/* SODIMM  92 */
+			   <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI			0x06000040>,	/* SODIMM  90 */
+			   <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK			0x06000040>;	/* SODIMM  88 */
+	};
+
+	pinctrl_lpspi2_cs2: lpspi2cs2grp {
+		fsl,pins = <IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02		0x21>;		/* SODIMM  65 */
+	};
+
+	/* Colibri UART_B */
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX			0x06000020>,	/* SODIMM  36 */
+			   <IMX8QXP_UART0_TX_ADMA_UART0_TX			0x06000020>,	/* SODIMM  38 */
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B		0x06000020>,	/* SODIMM  34 */
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B		0x06000020>;	/* SODIMM  32 */
+	};
+
+	/* Colibri UART_C */
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <IMX8QXP_UART2_RX_ADMA_UART2_RX			0x06000020>,	/* SODIMM  19 */
+			   <IMX8QXP_UART2_TX_ADMA_UART2_TX			0x06000020>;	/* SODIMM  21 */
+	};
+
+	/* Colibri UART_A */
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX			0x06000020>,	/* SODIMM  33 */
+			   <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX			0x06000020>;	/* SODIMM  35 */
+	};
+
+	/* Colibri UART_A Control */
+	pinctrl_lpuart3_ctrl: lpuart3ctrlgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00		0x20>,		/* SODIMM  23 */
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29			0x20>,		/* SODIMM  25 */
+			   <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30			0x20>,		/* SODIMM  27 */
+			   <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03			0x20>,		/* SODIMM  29 */
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22			0x20>,		/* SODIMM  31 */
+			   <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02			0x20>;		/* SODIMM  37 */
+	};
+
+	/* On module wifi module */
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01		0x04000061>,	/* SODIMM 178 */
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02		0x04000061>,	/* SODIMM  94 */
+			   <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00		0x60>;		/* SODIMM  81 */
+	};
+
+	/* Colibri PWM_A */
+	pinctrl_pwm_a: pwmagrp {
+	/* both pins are connected together, reserve the unused CSI_D05 */
+		fsl,pins = <IMX8QXP_CSI_D05_CI_PI_D07				0x61>,		/* SODIMM  59 */
+			   <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT			0x60>;		/* SODIMM  59 */
+	};
+
+	/* Colibri PWM_B */
+	pinctrl_pwm_b: pwmbgrp {
+		fsl,pins = <IMX8QXP_UART1_TX_LSIO_PWM0_OUT			0x60>;		/* SODIMM  28 */
+	};
+
+	/* Colibri PWM_C */
+	pinctrl_pwm_c: pwmcgrp {
+		fsl,pins = <IMX8QXP_UART1_RX_LSIO_PWM1_OUT			0x60>;		/* SODIMM  30 */
+	};
+
+	/* Colibri PWM_D */
+	pinctrl_pwm_d: pwmdgrp {
+	/* both pins are connected together, reserve the unused CSI_D04 */
+		fsl,pins = <IMX8QXP_CSI_D04_CI_PI_D06				0x61>,		/* SODIMM  67 */
+			   <IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT			0x60>;		/* SODIMM  67 */
+	};
+
+	/* On-module I2S */
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD			0x06000040>,
+			   <IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD			0x06000040>,
+			   <IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC			0x06000040>,
+			   <IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS			0x06000040>;
+	};
+
+	/* Colibri Audio Analogue Microphone GND */
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06		0x41>;
+	};
+
+	/* On-module SGTL5000 clock */
+	pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp {
+		fsl,pins = <IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0			0x21>;
+	};
+
+	/* On-module USB interrupt */
+	pinctrl_usb3503a: usb3503agrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04		0x61>;
+	};
+
+	/* Colibri USB Client Cable Detect */
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09	0x06000040>;	/* SODIMM 137 */
+	};
+
+	/* USB Host Power Enable */
+	pinctrl_usbh1_reg: usbh1reggrp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03			0x06000040>;	/* SODIMM 129 */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	/* Colibri SD/MMC Card Detect */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x06000021>;	/* SODIMM  43 */
+	};
+
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x60>;		/* SODIMM  43 */
+	};
+
+	/* Colibri SD/MMC Card */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23			0x60>,		/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24			0x60>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25		0x60>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26		0x60>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27		0x60>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28		0x60>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20>;
+	};
+};
+
+/* Delete peripherals which are not present on SOC, but are defined in imx8-ss-*.dtsi */
+
+/delete-node/ &adc1;
+/delete-node/ &adc1_lpcg;
+/delete-node/ &dsp;
+/delete-node/ &dsp_lpcg;
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
new file mode 100644
index 0000000000..cafd39130e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/ {
+	model = "NXP i.MX93 11X11 EVK board";
+	compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4000000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021f000 {
+			reg = <0 0x2021f000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
new file mode 100644
index 0000000000..4298a145f8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
@@ -0,0 +1,623 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2022 NXP
+ */
+
+#ifndef __DTS_IMX93_PINFUNC_H
+#define __DTS_IMX93_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX93_PAD_DAP_TDI__JTAG_MUX_TDI                            0x0000 0x01B0 0x03D8 0x0 0x0
+#define MX93_PAD_DAP_TDI__MQS2_LEFT                               0x0000 0x01B0 0x0000 0x1 0x0
+#define MX93_PAD_DAP_TDI__CAN2_TX                                 0x0000 0x01B0 0x0000 0x3 0x0
+#define MX93_PAD_DAP_TDI__FLEXIO2_FLEXIO30                        0x0000 0x01B0 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TDI__GPIO3_IO28                              0x0000 0x01B0 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TDI__LPUART5_RX                              0x0000 0x01B0 0x0430 0x6 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS                      0x0004 0x01B4 0x03DC 0x0 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31                  0x0004 0x01B4 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__GPIO3_IO29                        0x0004 0x01B4 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                     0x0004 0x01B4 0x0000 0x6 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK                     0x0008 0x01B8 0x03D4 0x0 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30                 0x0008 0x01B8 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__GPIO3_IO30                       0x0008 0x01B8 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                    0x0008 0x01B8 0x042C 0x6 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO                   0x000C 0x01BC 0x0000 0x0 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT                     0x000C 0x01BC 0x0000 0x1 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__CAN2_RX                        0x000C 0x01BC 0x0364 0x3 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31               0x000C 0x01BC 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__GPIO3_IO31                     0x000C 0x01BC 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX                     0x000C 0x01BC 0x0434 0x6 0x0
+#define MX93_PAD_GPIO_IO00__GPIO2_IO00                            0x0010 0x01C0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO00__LPI2C3_SDA                            0x0010 0x01C0 0x03E4 0x11 0x0
+#define MX93_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK                      0x0010 0x01C0 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK                     0x0010 0x01C0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO00__LPSPI6_PCS0                           0x0010 0x01C0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO00__LPUART5_TX                            0x0010 0x01C0 0x0434 0x5 0x1
+#define MX93_PAD_GPIO_IO00__LPI2C5_SDA                            0x0010 0x01C0 0x03EC 0x16 0x0
+#define MX93_PAD_GPIO_IO00__FLEXIO1_FLEXIO00                      0x0010 0x01C0 0x036C 0x7 0x0
+#define MX93_PAD_GPIO_IO01__GPIO2_IO01                            0x0014 0x01C4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO01__LPI2C3_SCL                            0x0014 0x01C4 0x03E0 0x11 0x0
+#define MX93_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA00                   0x0014 0x01C4 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE                      0x0014 0x01C4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO01__LPSPI6_SIN                            0x0014 0x01C4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO01__LPUART5_RX                            0x0014 0x01C4 0x0430 0x5 0x1
+#define MX93_PAD_GPIO_IO01__LPI2C5_SCL                            0x0014 0x01C4 0x03E8 0x16 0x0
+#define MX93_PAD_GPIO_IO01__FLEXIO1_FLEXIO01                      0x0014 0x01C4 0x0370 0x7 0x0
+#define MX93_PAD_GPIO_IO02__GPIO2_IO02                            0x0018 0x01C8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO02__LPI2C4_SDA                            0x0018 0x01C8 0x0000 0x11 0x0
+#define MX93_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC                    0x0018 0x01C8 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC                   0x0018 0x01C8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO02__LPSPI6_SOUT                           0x0018 0x01C8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO02__LPUART5_CTS_B                         0x0018 0x01C8 0x042C 0x5 0x1
+#define MX93_PAD_GPIO_IO02__LPI2C6_SDA                            0x0018 0x01C8 0x03F4 0x16 0x0
+#define MX93_PAD_GPIO_IO02__FLEXIO1_FLEXIO02                      0x0018 0x01C8 0x0374 0x7 0x0
+#define MX93_PAD_GPIO_IO03__GPIO2_IO03                            0x001C 0x01CC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO03__LPI2C4_SCL                            0x001C 0x01CC 0x0000 0x11 0x0
+#define MX93_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC                    0x001C 0x01CC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC                   0x001C 0x01CC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO03__LPSPI6_SCK                            0x001C 0x01CC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO03__LPUART5_RTS_B                         0x001C 0x01CC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO03__LPI2C6_SCL                            0x001C 0x01CC 0x03F0 0x16 0x0
+#define MX93_PAD_GPIO_IO03__FLEXIO1_FLEXIO03                      0x001C 0x01CC 0x0378 0x7 0x0
+#define MX93_PAD_GPIO_IO04__GPIO2_IO04                            0x0020 0x01D0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO04__TPM3_CH0                              0x0020 0x01D0 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO04__PDM_CLK                               0x0020 0x01D0 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00                  0x0020 0x01D0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO04__LPSPI7_PCS0                           0x0020 0x01D0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO04__LPUART6_TX                            0x0020 0x01D0 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO04__LPI2C6_SDA                            0x0020 0x01D0 0x03F4 0x16 0x1
+#define MX93_PAD_GPIO_IO04__FLEXIO1_FLEXIO04                      0x0020 0x01D0 0x037C 0x7 0x0
+#define MX93_PAD_GPIO_IO05__GPIO2_IO05                            0x0024 0x01D4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO05__TPM4_CH0                              0x0024 0x01D4 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO05__PDM_BIT_STREAM00                      0x0024 0x01D4 0x0438 0x2 0x0
+#define MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01                  0x0024 0x01D4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO05__LPSPI7_SIN                            0x0024 0x01D4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO05__LPUART6_RX                            0x0024 0x01D4 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO05__LPI2C6_SCL                            0x0024 0x01D4 0x03F0 0x16 0x1
+#define MX93_PAD_GPIO_IO05__FLEXIO1_FLEXIO05                      0x0024 0x01D4 0x0380 0x7 0x0
+#define MX93_PAD_GPIO_IO06__GPIO2_IO06                            0x0028 0x01D8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO06__TPM5_CH0                              0x0028 0x01D8 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO06__PDM_BIT_STREAM01                      0x0028 0x01D8 0x043C 0x2 0x0
+#define MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02                  0x0028 0x01D8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO06__LPSPI7_SOUT                           0x0028 0x01D8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO06__LPUART6_CTS_B                         0x0028 0x01D8 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO06__LPI2C7_SDA                            0x0028 0x01D8 0x03FC 0x16 0x0
+#define MX93_PAD_GPIO_IO06__FLEXIO1_FLEXIO06                      0x0028 0x01D8 0x0384 0x7 0x0
+#define MX93_PAD_GPIO_IO07__GPIO2_IO07                            0x002C 0x01DC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO07__LPSPI3_PCS1                           0x002C 0x01DC 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA01                   0x002C 0x01DC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03                  0x002C 0x01DC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO07__LPSPI7_SCK                            0x002C 0x01DC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO07__LPUART6_RTS_B                         0x002C 0x01DC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO07__LPI2C7_SCL                            0x002C 0x01DC 0x03F8 0x16 0x0
+#define MX93_PAD_GPIO_IO07__FLEXIO1_FLEXIO07                      0x002C 0x01DC 0x0388 0x7 0x0
+#define MX93_PAD_GPIO_IO08__GPIO2_IO08                            0x0030 0x01E0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO08__LPSPI3_PCS0                           0x0030 0x01E0 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA02                   0x0030 0x01E0 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04                  0x0030 0x01E0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO08__TPM6_CH0                              0x0030 0x01E0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO08__LPUART7_TX                            0x0030 0x01E0 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO08__LPI2C7_SDA                            0x0030 0x01E0 0x03FC 0x16 0x1
+#define MX93_PAD_GPIO_IO08__FLEXIO1_FLEXIO08                      0x0030 0x01E0 0x038C 0x7 0x0
+#define MX93_PAD_GPIO_IO09__GPIO2_IO09                            0x0034 0x01E4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO09__LPSPI3_SIN                            0x0034 0x01E4 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA03                   0x0034 0x01E4 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05                  0x0034 0x01E4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO09__TPM3_EXTCLK                           0x0034 0x01E4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO09__LPUART7_RX                            0x0034 0x01E4 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO09__LPI2C7_SCL                            0x0034 0x01E4 0x03F8 0x16 0x1
+#define MX93_PAD_GPIO_IO09__FLEXIO1_FLEXIO09                      0x0034 0x01E4 0x0390 0x7 0x0
+#define MX93_PAD_GPIO_IO10__GPIO2_IO10                            0x0038 0x01E8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO10__LPSPI3_SOUT                           0x0038 0x01E8 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA04                   0x0038 0x01E8 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06                  0x0038 0x01E8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO10__TPM4_EXTCLK                           0x0038 0x01E8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO10__LPUART7_CTS_B                         0x0038 0x01E8 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO10__LPI2C8_SDA                            0x0038 0x01E8 0x0404 0x16 0x0
+#define MX93_PAD_GPIO_IO10__FLEXIO1_FLEXIO10                      0x0038 0x01E8 0x0394 0x7 0x0
+#define MX93_PAD_GPIO_IO11__GPIO2_IO11                            0x003C 0x01EC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO11__LPSPI3_SCK                            0x003C 0x01EC 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA05                   0x003C 0x01EC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07                  0x003C 0x01EC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO11__TPM5_EXTCLK                           0x003C 0x01EC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO11__LPUART7_RTS_B                         0x003C 0x01EC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO11__LPI2C8_SCL                            0x003C 0x01EC 0x0400 0x16 0x0
+#define MX93_PAD_GPIO_IO11__FLEXIO1_FLEXIO11                      0x003C 0x01EC 0x0398 0x7 0x0
+#define MX93_PAD_GPIO_IO12__GPIO2_IO12                            0x0040 0x01F0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO12__TPM3_CH2                              0x0040 0x01F0 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO12__PDM_BIT_STREAM02                      0x0040 0x01F0 0x0440 0x2 0x0
+#define MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08                  0x0040 0x01F0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO12__LPSPI8_PCS0                           0x0040 0x01F0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO12__LPUART8_TX                            0x0040 0x01F0 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO12__LPI2C8_SDA                            0x0040 0x01F0 0x0404 0x16 0x1
+#define MX93_PAD_GPIO_IO12__SAI3_RX_SYNC                          0x0040 0x01F0 0x0450 0x7 0x0
+#define MX93_PAD_GPIO_IO13__GPIO2_IO13                            0x0044 0x01F4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO13__TPM4_CH2                              0x0044 0x01F4 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO13__PDM_BIT_STREAM03                      0x0044 0x01F4 0x0444 0x2 0x0
+#define MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09                  0x0044 0x01F4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO13__LPSPI8_SIN                            0x0044 0x01F4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO13__LPUART8_RX                            0x0044 0x01F4 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO13__LPI2C8_SCL                            0x0044 0x01F4 0x0400 0x16 0x1
+#define MX93_PAD_GPIO_IO13__FLEXIO1_FLEXIO13                      0x0044 0x01F4 0x039C 0x7 0x0
+#define MX93_PAD_GPIO_IO14__GPIO2_IO14                            0x0048 0x01F8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO14__LPUART3_TX                            0x0048 0x01F8 0x041C 0x1 0x0
+#define MX93_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA06                   0x0048 0x01F8 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10                  0x0048 0x01F8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO14__LPSPI8_SOUT                           0x0048 0x01F8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO14__LPUART8_CTS_B                         0x0048 0x01F8 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO14__LPUART4_TX                            0x0048 0x01F8 0x0428 0x6 0x0
+#define MX93_PAD_GPIO_IO14__FLEXIO1_FLEXIO14                      0x0048 0x01F8 0x03A0 0x7 0x0
+#define MX93_PAD_GPIO_IO15__GPIO2_IO15                            0x004C 0x01FC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO15__LPUART3_RX                            0x004C 0x01FC 0x0418 0x1 0x0
+#define MX93_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA07                   0x004C 0x01FC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11                  0x004C 0x01FC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO15__LPSPI8_SCK                            0x004C 0x01FC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO15__LPUART8_RTS_B                         0x004C 0x01FC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO15__LPUART4_RX                            0x004C 0x01FC 0x0424 0x6 0x0
+#define MX93_PAD_GPIO_IO15__FLEXIO1_FLEXIO15                      0x004C 0x01FC 0x03A4 0x7 0x0
+#define MX93_PAD_GPIO_IO16__GPIO2_IO16                            0x0050 0x0200 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO16__SAI3_TX_BCLK                          0x0050 0x0200 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO16__PDM_BIT_STREAM02                      0x0050 0x0200 0x0440 0x2 0x1
+#define MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12                  0x0050 0x0200 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO16__LPUART3_CTS_B                         0x0050 0x0200 0x0414 0x4 0x0
+#define MX93_PAD_GPIO_IO16__LPSPI4_PCS2                           0x0050 0x0200 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO16__LPUART4_CTS_B                         0x0050 0x0200 0x0420 0x6 0x0
+#define MX93_PAD_GPIO_IO16__FLEXIO1_FLEXIO16                      0x0050 0x0200 0x03A8 0x7 0x0
+#define MX93_PAD_GPIO_IO17__GPIO2_IO17                            0x0054 0x0204 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO17__SAI3_MCLK                             0x0054 0x0204 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA08                   0x0054 0x0204 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13                  0x0054 0x0204 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO17__LPUART3_RTS_B                         0x0054 0x0204 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO17__LPSPI4_PCS1                           0x0054 0x0204 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO17__LPUART4_RTS_B                         0x0054 0x0204 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO17__FLEXIO1_FLEXIO17                      0x0054 0x0204 0x03AC 0x7 0x0
+#define MX93_PAD_GPIO_IO18__GPIO2_IO18                            0x0058 0x0208 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO18__SAI3_RX_BCLK                          0x0058 0x0208 0x044C 0x1 0x0
+#define MX93_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA09                   0x0058 0x0208 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14                  0x0058 0x0208 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO18__LPSPI5_PCS0                           0x0058 0x0208 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO18__LPSPI4_PCS0                           0x0058 0x0208 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO18__TPM5_CH2                              0x0058 0x0208 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO18__FLEXIO1_FLEXIO18                      0x0058 0x0208 0x03B0 0x7 0x0
+#define MX93_PAD_GPIO_IO19__GPIO2_IO19                            0x005C 0x020C 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO19__SAI3_RX_SYNC                          0x005C 0x020C 0x0450 0x1 0x1
+#define MX93_PAD_GPIO_IO19__PDM_BIT_STREAM03                      0x005C 0x020C 0x0444 0x2 0x1
+#define MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15                  0x005C 0x020C 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO19__LPSPI5_SIN                            0x005C 0x020C 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO19__LPSPI4_SIN                            0x005C 0x020C 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO19__TPM6_CH2                              0x005C 0x020C 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO19__SAI3_TX_DATA00                        0x005C 0x020C 0x0000 0x7 0x0
+#define MX93_PAD_GPIO_IO20__GPIO2_IO20                            0x0060 0x0210 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO20__SAI3_RX_DATA00                        0x0060 0x0210 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO20__PDM_BIT_STREAM00                      0x0060 0x0210 0x0438 0x2 0x1
+#define MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16                  0x0060 0x0210 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO20__LPSPI5_SOUT                           0x0060 0x0210 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO20__LPSPI4_SOUT                           0x0060 0x0210 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO20__TPM3_CH1                              0x0060 0x0210 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO20__FLEXIO1_FLEXIO20                      0x0060 0x0210 0x03B4 0x7 0x0
+#define MX93_PAD_GPIO_IO21__GPIO2_IO21                            0x0064 0x0214 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO21__SAI3_TX_DATA00                        0x0064 0x0214 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO21__PDM_CLK                               0x0064 0x0214 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17                  0x0064 0x0214 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO21__LPSPI5_SCK                            0x0064 0x0214 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO21__LPSPI4_SCK                            0x0064 0x0214 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO21__TPM4_CH1                              0x0064 0x0214 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO21__SAI3_RX_BCLK                          0x0064 0x0214 0x044C 0x7 0x1
+#define MX93_PAD_GPIO_IO22__GPIO2_IO22                            0x0068 0x0218 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO22__USDHC3_CLK                            0x0068 0x0218 0x0458 0x1 0x0
+#define MX93_PAD_GPIO_IO22__SPDIF_IN                              0x0068 0x0218 0x0454 0x2 0x0
+#define MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18                  0x0068 0x0218 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO22__TPM5_CH1                              0x0068 0x0218 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO22__TPM6_EXTCLK                           0x0068 0x0218 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO22__LPI2C5_SDA                            0x0068 0x0218 0x03EC 0x16 0x1
+#define MX93_PAD_GPIO_IO22__FLEXIO1_FLEXIO22                      0x0068 0x0218 0x03B8 0x7 0x0
+#define MX93_PAD_GPIO_IO23__GPIO2_IO23                            0x006C 0x021C 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO23__USDHC3_CMD                            0x006C 0x021C 0x045C 0x1 0x0
+#define MX93_PAD_GPIO_IO23__SPDIF_OUT                             0x006C 0x021C 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19                  0x006C 0x021C 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO23__TPM6_CH1                              0x006C 0x021C 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO23__LPI2C5_SCL                            0x006C 0x021C 0x03E8 0x16 0x1
+#define MX93_PAD_GPIO_IO23__FLEXIO1_FLEXIO23                      0x006C 0x021C 0x03BC 0x7 0x0
+#define MX93_PAD_GPIO_IO24__GPIO2_IO24                            0x0070 0x0220 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO24__USDHC3_DATA0                          0x0070 0x0220 0x0460 0x1 0x0
+#define MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20                  0x0070 0x0220 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO24__TPM3_CH3                              0x0070 0x0220 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO24__JTAG_MUX_TDO                          0x0070 0x0220 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO24__LPSPI6_PCS1                           0x0070 0x0220 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO24__FLEXIO1_FLEXIO24                      0x0070 0x0220 0x03C0 0x7 0x0
+#define MX93_PAD_GPIO_IO25__GPIO2_IO25                            0x0074 0x0224 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO25__USDHC3_DATA1                          0x0074 0x0224 0x0464 0x1 0x0
+#define MX93_PAD_GPIO_IO25__CAN2_TX                               0x0074 0x0224 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21                  0x0074 0x0224 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO25__TPM4_CH3                              0x0074 0x0224 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO25__JTAG_MUX_TCK                          0x0074 0x0224 0x03D4 0x5 0x1
+#define MX93_PAD_GPIO_IO25__LPSPI7_PCS1                           0x0074 0x0224 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO25__FLEXIO1_FLEXIO25                      0x0074 0x0224 0x03C4 0x7 0x0
+#define MX93_PAD_GPIO_IO26__GPIO2_IO26                            0x0078 0x0228 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO26__USDHC3_DATA2                          0x0078 0x0228 0x0468 0x1 0x0
+#define MX93_PAD_GPIO_IO26__PDM_BIT_STREAM01                      0x0078 0x0228 0x043C 0x2 0x1
+#define MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22                  0x0078 0x0228 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO26__TPM5_CH3                              0x0078 0x0228 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO26__JTAG_MUX_TDI                          0x0078 0x0228 0x03D8 0x5 0x1
+#define MX93_PAD_GPIO_IO26__LPSPI8_PCS1                           0x0078 0x0228 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO26__SAI3_TX_SYNC                          0x0078 0x0228 0x0000 0x7 0x0
+#define MX93_PAD_GPIO_IO27__GPIO2_IO27                            0x007C 0x022C 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO27__USDHC3_DATA3                          0x007C 0x022C 0x046C 0x1 0x0
+#define MX93_PAD_GPIO_IO27__CAN2_RX                               0x007C 0x022C 0x0364 0x2 0x1
+#define MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23                  0x007C 0x022C 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO27__TPM6_CH3                              0x007C 0x022C 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO27__JTAG_MUX_TMS                          0x007C 0x022C 0x03DC 0x5 0x1
+#define MX93_PAD_GPIO_IO27__LPSPI5_PCS1                           0x007C 0x022C 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO27__FLEXIO1_FLEXIO27                      0x007C 0x022C 0x03C8 0x7 0x0
+#define MX93_PAD_GPIO_IO28__GPIO2_IO28                            0x0080 0x0230 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO28__LPI2C3_SDA                            0x0080 0x0230 0x03E4 0x11 0x1
+#define MX93_PAD_GPIO_IO28__FLEXIO1_FLEXIO28                      0x0080 0x0230 0x0000 0x7 0x0
+#define MX93_PAD_GPIO_IO29__GPIO2_IO29                            0x0084 0x0234 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO29__LPI2C3_SCL                            0x0084 0x0234 0x03E0 0x11 0x1
+#define MX93_PAD_GPIO_IO29__FLEXIO1_FLEXIO29                      0x0084 0x0234 0x0000 0x7 0x0
+#define MX93_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1                    0x0088 0x0238 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26                      0x0088 0x0238 0x0000 0x4 0x0
+#define MX93_PAD_CCM_CLKO1__GPIO3_IO26                            0x0088 0x0238 0x0000 0x5 0x0
+#define MX93_PAD_CCM_CLKO2__GPIO3_IO27                            0x008C 0x023C 0x0000 0x5 0x0
+#define MX93_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2                    0x008C 0x023C 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27                      0x008C 0x023C 0x03C8 0x4 0x1
+#define MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3                    0x0090 0x0240 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28                      0x0090 0x0240 0x0000 0x4 0x0
+#define MX93_PAD_CCM_CLKO3__GPIO4_IO28                            0x0090 0x0240 0x0000 0x5 0x0
+#define MX93_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4                    0x0094 0x0244 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29                      0x0094 0x0244 0x0000 0x4 0x0
+#define MX93_PAD_CCM_CLKO4__GPIO4_IO29                            0x0094 0x0244 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_MDC__ENET_QOS_MDC                          0x0098 0x0248 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_MDC__LPUART3_DCB_B                         0x0098 0x0248 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_MDC__I3C2_SCL                              0x0098 0x0248 0x03CC 0x2 0x0
+#define MX93_PAD_ENET1_MDC__HSIOMIX_OTG_ID1                       0x0098 0x0248 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_MDC__FLEXIO2_FLEXIO00                      0x0098 0x0248 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_MDC__GPIO4_IO00                            0x0098 0x0248 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO                        0x009C 0x024C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_MDIO__LPUART3_RIN_B                        0x009C 0x024C 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_MDIO__I3C2_SDA                             0x009C 0x024C 0x03D0 0x2 0x0
+#define MX93_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1                     0x009C 0x024C 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_MDIO__FLEXIO2_FLEXIO01                     0x009C 0x024C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_MDIO__GPIO4_IO01                           0x009C 0x024C 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                    0x00A0 0x0250 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD3__CAN2_TX                               0x00A0 0x0250 0x0000 0x2 0x0
+#define MX93_PAD_ENET1_TD3__HSIOMIX_OTG_ID2                       0x00A0 0x0250 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_TD3__FLEXIO2_FLEXIO02                      0x00A0 0x0250 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD3__GPIO4_IO02                            0x00A0 0x0250 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                    0x00A4 0x0254 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK   0x00A4 0x0254 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TD2__CAN2_RX                               0x00A4 0x0254 0x0364 0x2 0x2
+#define MX93_PAD_ENET1_TD2__HSIOMIX_OTG_OC2                       0x00A4 0x0254 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_TD2__FLEXIO2_FLEXIO03                      0x00A4 0x0254 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD2__GPIO4_IO03                            0x00A4 0x0254 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1                    0x00A8 0x0258 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD1__LPUART3_RTS_B                         0x00A8 0x0258 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TD1__I3C2_PUR                              0x00A8 0x0258 0x0000 0x2 0x0
+#define MX93_PAD_ENET1_TD1__HSIOMIX_OTG_OC1                       0x00A8 0x0258 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_TD1__FLEXIO2_FLEXIO04                      0x00A8 0x0258 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD1__GPIO4_IO04                            0x00A8 0x0258 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD1__I3C2_PUR_B                            0x00A8 0x0258 0x0000 0x6 0x0
+#define MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                    0x00AC 0x025C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD0__LPUART3_TX                            0x00AC 0x025C 0x041C 0x1 0x1
+#define MX93_PAD_ENET1_TD0__FLEXIO2_FLEXIO05                      0x00AC 0x025C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD0__GPIO4_IO05                            0x00AC 0x025C 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL              0x00B0 0x0260 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TX_CTL__LPUART3_DTR_B                      0x00B0 0x0260 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO06                   0x00B0 0x0260 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TX_CTL__GPIO4_IO06                         0x00B0 0x0260 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK    0x00B4 0x0264 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TXC__ENET_QOS_TX_ER                        0x00B4 0x0264 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TXC__FLEXIO2_FLEXIO07                      0x00B4 0x0264 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TXC__GPIO4_IO07                            0x00B4 0x0264 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x00B8 0x0268 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RX_CTL__LPUART3_DSR_B                      0x00B8 0x0268 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2                   0x00B8 0x0268 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO08                   0x00B8 0x0268 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RX_CTL__GPIO4_IO08                         0x00B8 0x0268 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x00BC 0x026C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER                        0x00BC 0x026C 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_RXC__FLEXIO2_FLEXIO09                      0x00BC 0x026C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RXC__GPIO4_IO09                            0x00BC 0x026C 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                    0x00C0 0x0270 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD0__LPUART3_RX                            0x00C0 0x0270 0x0418 0x1 0x1
+#define MX93_PAD_ENET1_RD0__FLEXIO2_FLEXIO10                      0x00C0 0x0270 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD0__GPIO4_IO10                            0x00C0 0x0270 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                    0x00C4 0x0274 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD1__LPUART3_CTS_B                         0x00C4 0x0274 0x0414 0x1 0x1
+#define MX93_PAD_ENET1_RD1__LPTMR2_ALT1                           0x00C4 0x0274 0x0408 0x3 0x0
+#define MX93_PAD_ENET1_RD1__FLEXIO2_FLEXIO11                      0x00C4 0x0274 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD1__GPIO4_IO11                            0x00C4 0x0274 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                    0x00C8 0x0278 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD2__LPTMR2_ALT2                           0x00C8 0x0278 0x040C 0x3 0x0
+#define MX93_PAD_ENET1_RD2__FLEXIO2_FLEXIO12                      0x00C8 0x0278 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD2__GPIO4_IO12                            0x00C8 0x0278 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                    0x00CC 0x027C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER               0x00CC 0x027C 0x0000 0x2 0x0
+#define MX93_PAD_ENET1_RD3__LPTMR2_ALT3                           0x00CC 0x027C 0x0410 0x3 0x0
+#define MX93_PAD_ENET1_RD3__FLEXIO2_FLEXIO13                      0x00CC 0x027C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD3__GPIO4_IO13                            0x00CC 0x027C 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_MDC__ENET1_MDC                             0x00D0 0x0280 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_MDC__LPUART4_DCB_B                         0x00D0 0x0280 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_MDC__SAI2_RX_SYNC                          0x00D0 0x0280 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_MDC__FLEXIO2_FLEXIO14                      0x00D0 0x0280 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_MDC__GPIO4_IO14                            0x00D0 0x0280 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_MDIO__ENET1_MDIO                           0x00D4 0x0284 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_MDIO__LPUART4_RIN_B                        0x00D4 0x0284 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_MDIO__SAI2_RX_BCLK                         0x00D4 0x0284 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15                     0x00D4 0x0284 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_MDIO__GPIO4_IO15                           0x00D4 0x0284 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD3__SAI2_RX_DATA00                        0x00D8 0x0288 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD3__FLEXIO2_FLEXIO16                      0x00D8 0x0288 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD3__GPIO4_IO16                            0x00D8 0x0288 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3                       0x00D8 0x0288 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2                       0x00DC 0x028C 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD2__ENET1_TX_CLK                          0x00DC 0x028C 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TD2__SAI2_RX_DATA01                        0x00DC 0x028C 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD2__FLEXIO2_FLEXIO17                      0x00DC 0x028C 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD2__GPIO4_IO17                            0x00DC 0x028C 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1                       0x00E0 0x0290 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD1__LPUART4_RTS_B                         0x00E0 0x0290 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TD1__SAI2_RX_DATA02                        0x00E0 0x0290 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD1__FLEXIO2_FLEXIO18                      0x00E0 0x0290 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD1__GPIO4_IO18                            0x00E0 0x0290 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0                       0x00E4 0x0294 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD0__LPUART4_TX                            0x00E4 0x0294 0x0428 0x1 0x1
+#define MX93_PAD_ENET2_TD0__SAI2_RX_DATA03                        0x00E4 0x0294 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD0__FLEXIO2_FLEXIO19                      0x00E4 0x0294 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD0__GPIO4_IO19                            0x00E4 0x0294 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL                 0x00E8 0x0298 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TX_CTL__LPUART4_DTR_B                      0x00E8 0x0298 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TX_CTL__SAI2_TX_SYNC                       0x00E8 0x0298 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20                   0x00E8 0x0298 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TX_CTL__GPIO4_IO20                         0x00E8 0x0298 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC                       0x00EC 0x029C 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TXC__ENET1_TX_ER                           0x00EC 0x029C 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TXC__SAI2_TX_BCLK                          0x00EC 0x029C 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TXC__FLEXIO2_FLEXIO21                      0x00EC 0x029C 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TXC__GPIO4_IO21                            0x00EC 0x029C 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL                 0x00F0 0x02A0 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RX_CTL__LPUART4_DSR_B                      0x00F0 0x02A0 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_RX_CTL__SAI2_TX_DATA00                     0x00F0 0x02A0 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22                   0x00F0 0x02A0 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RX_CTL__GPIO4_IO22                         0x00F0 0x02A0 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC                       0x00F4 0x02A4 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RXC__ENET1_RX_ER                           0x00F4 0x02A4 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_RXC__SAI2_TX_DATA01                        0x00F4 0x02A4 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RXC__FLEXIO2_FLEXIO23                      0x00F4 0x02A4 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RXC__GPIO4_IO23                            0x00F4 0x02A4 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0                       0x00F8 0x02A8 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD0__LPUART4_RX                            0x00F8 0x02A8 0x0424 0x1 0x1
+#define MX93_PAD_ENET2_RD0__SAI2_TX_DATA02                        0x00F8 0x02A8 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RD0__FLEXIO2_FLEXIO24                      0x00F8 0x02A8 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD0__GPIO4_IO24                            0x00F8 0x02A8 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1                       0x00FC 0x02AC 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD1__SPDIF_IN                              0x00FC 0x02AC 0x0454 0x1 0x1
+#define MX93_PAD_ENET2_RD1__SAI2_TX_DATA03                        0x00FC 0x02AC 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RD1__FLEXIO2_FLEXIO25                      0x00FC 0x02AC 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD1__GPIO4_IO25                            0x00FC 0x02AC 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2                       0x0100 0x02B0 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD2__LPUART4_CTS_B                         0x0100 0x02B0 0x0420 0x1 0x1
+#define MX93_PAD_ENET2_RD2__SAI2_MCLK                             0x0100 0x02B0 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RD2__MQS2_RIGHT                            0x0100 0x02B0 0x0000 0x3 0x0
+#define MX93_PAD_ENET2_RD2__FLEXIO2_FLEXIO26                      0x0100 0x02B0 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD2__GPIO4_IO26                            0x0100 0x02B0 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3                       0x0104 0x02B4 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD3__SPDIF_OUT                             0x0104 0x02B4 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_RD3__SPDIF_IN                              0x0104 0x02B4 0x0454 0x2 0x2
+#define MX93_PAD_ENET2_RD3__MQS2_LEFT                             0x0104 0x02B4 0x0000 0x3 0x0
+#define MX93_PAD_ENET2_RD3__FLEXIO2_FLEXIO27                      0x0104 0x02B4 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD3__GPIO4_IO27                            0x0104 0x02B4 0x0000 0x5 0x0
+#define MX93_PAD_SD1_CLK__FLEXIO1_FLEXIO08                        0x0108 0x02B8 0x038C 0x4 0x1
+#define MX93_PAD_SD1_CLK__GPIO3_IO08                              0x0108 0x02B8 0x0000 0x5 0x0
+#define MX93_PAD_SD1_CLK__USDHC1_CLK                              0x0108 0x02B8 0x0000 0x0 0x0
+#define MX93_PAD_SD1_CMD__USDHC1_CMD                              0x010C 0x02BC 0x0000 0x0 0x0
+#define MX93_PAD_SD1_CMD__FLEXIO1_FLEXIO09                        0x010C 0x02BC 0x0390 0x4 0x1
+#define MX93_PAD_SD1_CMD__GPIO3_IO09                              0x010C 0x02BC 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA0__USDHC1_DATA0                          0x0110 0x02C0 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA0__FLEXIO1_FLEXIO10                      0x0110 0x02C0 0x0394 0x4 0x1
+#define MX93_PAD_SD1_DATA0__GPIO3_IO10                            0x0110 0x02C0 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA1__USDHC1_DATA1                          0x0114 0x02C4 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA1__FLEXIO1_FLEXIO11                      0x0114 0x02C4 0x0398 0x4 0x1
+#define MX93_PAD_SD1_DATA1__GPIO3_IO11                            0x0114 0x02C4 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT                 0x0114 0x02C4 0x0000 0x6 0x0
+#define MX93_PAD_SD1_DATA2__USDHC1_DATA2                          0x0118 0x02C8 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA2__FLEXIO1_FLEXIO12                      0x0118 0x02C8 0x0000 0x4 0x0
+#define MX93_PAD_SD1_DATA2__GPIO3_IO12                            0x0118 0x02C8 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY               0x0118 0x02C8 0x0000 0x6 0x0
+#define MX93_PAD_SD1_DATA3__USDHC1_DATA3                          0x011C 0x02CC 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B                      0x011C 0x02CC 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA3__FLEXIO1_FLEXIO13                      0x011C 0x02CC 0x039C 0x4 0x1
+#define MX93_PAD_SD1_DATA3__GPIO3_IO13                            0x011C 0x02CC 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA4__USDHC1_DATA4                          0x0120 0x02D0 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA4__FLEXSPI1_A_DATA04                     0x0120 0x02D0 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA4__FLEXIO1_FLEXIO14                      0x0120 0x02D0 0x03A0 0x4 0x1
+#define MX93_PAD_SD1_DATA4__GPIO3_IO14                            0x0120 0x02D0 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA5__USDHC1_DATA5                          0x0124 0x02D4 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA5__FLEXSPI1_A_DATA05                     0x0124 0x02D4 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA5__USDHC1_RESET_B                        0x0124 0x02D4 0x0000 0x2 0x0
+#define MX93_PAD_SD1_DATA5__FLEXIO1_FLEXIO15                      0x0124 0x02D4 0x03A4 0x4 0x1
+#define MX93_PAD_SD1_DATA5__GPIO3_IO15                            0x0124 0x02D4 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA6__USDHC1_DATA6                          0x0128 0x02D8 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA6__FLEXSPI1_A_DATA06                     0x0128 0x02D8 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA6__USDHC1_CD_B                           0x0128 0x02D8 0x0000 0x2 0x0
+#define MX93_PAD_SD1_DATA6__FLEXIO1_FLEXIO16                      0x0128 0x02D8 0x03A8 0x4 0x1
+#define MX93_PAD_SD1_DATA6__GPIO3_IO16                            0x0128 0x02D8 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA7__USDHC1_DATA7                          0x012C 0x02DC 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA7__FLEXSPI1_A_DATA07                     0x012C 0x02DC 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA7__USDHC1_WP                             0x012C 0x02DC 0x0000 0x2 0x0
+#define MX93_PAD_SD1_DATA7__FLEXIO1_FLEXIO17                      0x012C 0x02DC 0x03AC 0x4 0x1
+#define MX93_PAD_SD1_DATA7__GPIO3_IO17                            0x012C 0x02DC 0x0000 0x5 0x0
+#define MX93_PAD_SD1_STROBE__USDHC1_STROBE                        0x0130 0x02E0 0x0000 0x0 0x0
+#define MX93_PAD_SD1_STROBE__FLEXSPI1_A_DQS                       0x0130 0x02E0 0x0000 0x1 0x0
+#define MX93_PAD_SD1_STROBE__FLEXIO1_FLEXIO18                     0x0130 0x02E0 0x03B0 0x4 0x1
+#define MX93_PAD_SD1_STROBE__GPIO3_IO18                           0x0130 0x02E0 0x0000 0x5 0x0
+#define MX93_PAD_SD2_VSELECT__USDHC2_VSELECT                      0x0134 0x02E4 0x0000 0x0 0x0
+#define MX93_PAD_SD2_VSELECT__USDHC2_WP                           0x0134 0x02E4 0x0000 0x1 0x0
+#define MX93_PAD_SD2_VSELECT__LPTMR2_ALT3                         0x0134 0x02E4 0x0410 0x2 0x1
+#define MX93_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19                    0x0134 0x02E4 0x0000 0x4 0x0
+#define MX93_PAD_SD2_VSELECT__GPIO3_IO19                          0x0134 0x02E4 0x0000 0x5 0x0
+#define MX93_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1               0x0134 0x02E4 0x0368 0x6 0x0
+#define MX93_PAD_SD3_CLK__USDHC3_CLK                              0x0138 0x02E8 0x0458 0x0 0x1
+#define MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK                         0x0138 0x02E8 0x0000 0x1 0x0
+#define MX93_PAD_SD3_CLK__FLEXIO1_FLEXIO20                        0x0138 0x02E8 0x03B4 0x4 0x1
+#define MX93_PAD_SD3_CLK__GPIO3_IO20                              0x0138 0x02E8 0x0000 0x5 0x0
+#define MX93_PAD_SD3_CMD__USDHC3_CMD                              0x013C 0x02EC 0x045C 0x0 0x1
+#define MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B                        0x013C 0x02EC 0x0000 0x1 0x0
+#define MX93_PAD_SD3_CMD__FLEXIO1_FLEXIO21                        0x013C 0x02EC 0x0000 0x4 0x0
+#define MX93_PAD_SD3_CMD__GPIO3_IO21                              0x013C 0x02EC 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA0__USDHC3_DATA0                          0x0140 0x02F0 0x0460 0x0 0x1
+#define MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00                     0x0140 0x02F0 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA0__FLEXIO1_FLEXIO22                      0x0140 0x02F0 0x03B8 0x4 0x1
+#define MX93_PAD_SD3_DATA0__GPIO3_IO22                            0x0140 0x02F0 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA1__USDHC3_DATA1                          0x0144 0x02F4 0x0464 0x0 0x1
+#define MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01                     0x0144 0x02F4 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA1__FLEXIO1_FLEXIO23                      0x0144 0x02F4 0x03BC 0x4 0x1
+#define MX93_PAD_SD3_DATA1__GPIO3_IO23                            0x0144 0x02F4 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA2__USDHC3_DATA2                          0x0148 0x02F8 0x0468 0x0 0x1
+#define MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02                     0x0148 0x02F8 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA2__FLEXIO1_FLEXIO24                      0x0148 0x02F8 0x03C0 0x4 0x1
+#define MX93_PAD_SD3_DATA2__GPIO3_IO24                            0x0148 0x02F8 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA3__USDHC3_DATA3                          0x014C 0x02FC 0x046C 0x0 0x1
+#define MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03                     0x014C 0x02FC 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA3__FLEXIO1_FLEXIO25                      0x014C 0x02FC 0x03C4 0x4 0x1
+#define MX93_PAD_SD3_DATA3__GPIO3_IO25                            0x014C 0x02FC 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CD_B__USDHC2_CD_B                            0x0150 0x0300 0x0000 0x0 0x0
+#define MX93_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN                0x0150 0x0300 0x0000 0x1 0x0
+#define MX93_PAD_SD2_CD_B__I3C2_SCL                               0x0150 0x0300 0x03CC 0x2 0x1
+#define MX93_PAD_SD2_CD_B__FLEXIO1_FLEXIO00                       0x0150 0x0300 0x036C 0x4 0x1
+#define MX93_PAD_SD2_CD_B__GPIO3_IO00                             0x0150 0x0300 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CLK__USDHC2_CLK                              0x0154 0x0304 0x0000 0x0 0x0
+#define MX93_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT                0x0154 0x0304 0x0000 0x1 0x0
+#define MX93_PAD_SD2_CLK__I3C2_SDA                                0x0154 0x0304 0x03D0 0x2 0x1
+#define MX93_PAD_SD2_CLK__FLEXIO1_FLEXIO01                        0x0154 0x0304 0x0370 0x4 0x1
+#define MX93_PAD_SD2_CLK__GPIO3_IO01                              0x0154 0x0304 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                   0x0154 0x0304 0x0000 0x6 0x0
+#define MX93_PAD_SD2_CMD__USDHC2_CMD                              0x0158 0x0308 0x0000 0x0 0x0
+#define MX93_PAD_SD2_CMD__ENET1_1588_EVENT0_IN                    0x0158 0x0308 0x0000 0x1 0x0
+#define MX93_PAD_SD2_CMD__I3C2_PUR                                0x0158 0x0308 0x0000 0x2 0x0
+#define MX93_PAD_SD2_CMD__I3C2_PUR_B                              0x0158 0x0308 0x0000 0x3 0x0
+#define MX93_PAD_SD2_CMD__FLEXIO1_FLEXIO02                        0x0158 0x0308 0x0374 0x4 0x1
+#define MX93_PAD_SD2_CMD__GPIO3_IO02                              0x0158 0x0308 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                   0x0158 0x0308 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA0__USDHC2_DATA0                          0x015C 0x030C 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA0__ENET1_1588_EVENT0_OUT                 0x015C 0x030C 0x0000 0x1 0x0
+#define MX93_PAD_SD2_DATA0__CAN2_TX                               0x015C 0x030C 0x0000 0x2 0x0
+#define MX93_PAD_SD2_DATA0__FLEXIO1_FLEXIO03                      0x015C 0x030C 0x0378 0x4 0x1
+#define MX93_PAD_SD2_DATA0__GPIO3_IO03                            0x015C 0x030C 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                 0x015C 0x030C 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA1__USDHC2_DATA1                          0x0160 0x0310 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA1__ENET1_1588_EVENT1_IN                  0x0160 0x0310 0x0000 0x1 0x0
+#define MX93_PAD_SD2_DATA1__CAN2_RX                               0x0160 0x0310 0x0364 0x2 0x3
+#define MX93_PAD_SD2_DATA1__FLEXIO1_FLEXIO04                      0x0160 0x0310 0x037C 0x4 0x1
+#define MX93_PAD_SD2_DATA1__GPIO3_IO04                            0x0160 0x0310 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT                     0x0160 0x0310 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA2__USDHC2_DATA2                          0x0164 0x0314 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA2__ENET1_1588_EVENT1_OUT                 0x0164 0x0314 0x0000 0x1 0x0
+#define MX93_PAD_SD2_DATA2__MQS2_RIGHT                            0x0164 0x0314 0x0000 0x2 0x0
+#define MX93_PAD_SD2_DATA2__FLEXIO1_FLEXIO05                      0x0164 0x0314 0x0380 0x4 0x1
+#define MX93_PAD_SD2_DATA2__GPIO3_IO05                            0x0164 0x0314 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP                     0x0164 0x0314 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA3__USDHC2_DATA3                          0x0168 0x0318 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA3__LPTMR2_ALT1                           0x0168 0x0318 0x0408 0x1 0x1
+#define MX93_PAD_SD2_DATA3__MQS2_LEFT                             0x0168 0x0318 0x0000 0x2 0x0
+#define MX93_PAD_SD2_DATA3__FLEXIO1_FLEXIO06                      0x0168 0x0318 0x0384 0x4 0x1
+#define MX93_PAD_SD2_DATA3__GPIO3_IO06                            0x0168 0x0318 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET              0x0168 0x0318 0x0000 0x6 0x0
+#define MX93_PAD_SD2_RESET_B__USDHC2_RESET_B                      0x016C 0x031C 0x0000 0x0 0x0
+#define MX93_PAD_SD2_RESET_B__LPTMR2_ALT2                         0x016C 0x031C 0x040C 0x1 0x1
+#define MX93_PAD_SD2_RESET_B__FLEXIO1_FLEXIO07                    0x016C 0x031C 0x0388 0x4 0x1
+#define MX93_PAD_SD2_RESET_B__GPIO3_IO07                          0x016C 0x031C 0x0000 0x5 0x0
+#define MX93_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET           0x016C 0x031C 0x0000 0x6 0x0
+#define MX93_PAD_I2C1_SCL__LPI2C1_SCL                             0x0170 0x0320 0x0000 0x10 0x0
+#define MX93_PAD_I2C1_SCL__I3C1_SCL                               0x0170 0x0320 0x0000 0x1 0x0
+#define MX93_PAD_I2C1_SCL__LPUART1_DCB_B                          0x0170 0x0320 0x0000 0x2 0x0
+#define MX93_PAD_I2C1_SCL__TPM2_CH0                               0x0170 0x0320 0x0000 0x3 0x0
+#define MX93_PAD_I2C1_SCL__GPIO1_IO00                             0x0170 0x0320 0x0000 0x5 0x0
+#define MX93_PAD_I2C1_SDA__LPI2C1_SDA                             0x0174 0x0324 0x0000 0x10 0x0
+#define MX93_PAD_I2C1_SDA__I3C1_SDA                               0x0174 0x0324 0x0000 0x1 0x0
+#define MX93_PAD_I2C1_SDA__LPUART1_RIN_B                          0x0174 0x0324 0x0000 0x2 0x0
+#define MX93_PAD_I2C1_SDA__TPM2_CH1                               0x0174 0x0324 0x0000 0x3 0x0
+#define MX93_PAD_I2C1_SDA__GPIO1_IO01                             0x0174 0x0324 0x0000 0x5 0x0
+#define MX93_PAD_I2C2_SCL__LPI2C2_SCL                             0x0178 0x0328 0x0000 0x10 0x0
+#define MX93_PAD_I2C2_SCL__I3C1_PUR                               0x0178 0x0328 0x0000 0x1 0x0
+#define MX93_PAD_I2C2_SCL__LPUART2_DCB_B                          0x0178 0x0328 0x0000 0x2 0x0
+#define MX93_PAD_I2C2_SCL__TPM2_CH2                               0x0178 0x0328 0x0000 0x3 0x0
+#define MX93_PAD_I2C2_SCL__SAI1_RX_SYNC                           0x0178 0x0328 0x0000 0x4 0x0
+#define MX93_PAD_I2C2_SCL__GPIO1_IO02                             0x0178 0x0328 0x0000 0x5 0x0
+#define MX93_PAD_I2C2_SCL__I3C1_PUR_B                             0x0178 0x0328 0x0000 0x6 0x0
+#define MX93_PAD_I2C2_SDA__LPI2C2_SDA                             0x017C 0x032C 0x0000 0x10 0x0
+#define MX93_PAD_I2C2_SDA__LPUART2_RIN_B                          0x017C 0x032C 0x0000 0x2 0x0
+#define MX93_PAD_I2C2_SDA__TPM2_CH3                               0x017C 0x032C 0x0000 0x3 0x0
+#define MX93_PAD_I2C2_SDA__SAI1_RX_BCLK                           0x017C 0x032C 0x0000 0x4 0x0
+#define MX93_PAD_I2C2_SDA__GPIO1_IO03                             0x017C 0x032C 0x0000 0x5 0x0
+#define MX93_PAD_UART1_RXD__LPUART1_RX                            0x0180 0x0330 0x0000 0x0 0x0
+#define MX93_PAD_UART1_RXD__S400_UART_RX                          0x0180 0x0330 0x0000 0x1 0x0
+#define MX93_PAD_UART1_RXD__LPSPI2_SIN                            0x0180 0x0330 0x0000 0x2 0x0
+#define MX93_PAD_UART1_RXD__TPM1_CH0                              0x0180 0x0330 0x0000 0x3 0x0
+#define MX93_PAD_UART1_RXD__GPIO1_IO04                            0x0180 0x0330 0x0000 0x5 0x0
+#define MX93_PAD_UART1_TXD__LPUART1_TX                            0x0184 0x0334 0x0000 0x0 0x0
+#define MX93_PAD_UART1_TXD__S400_UART_TX                          0x0184 0x0334 0x0000 0x1 0x0
+#define MX93_PAD_UART1_TXD__LPSPI2_PCS0                           0x0184 0x0334 0x0000 0x2 0x0
+#define MX93_PAD_UART1_TXD__TPM1_CH1                              0x0184 0x0334 0x0000 0x3 0x0
+#define MX93_PAD_UART1_TXD__GPIO1_IO05                            0x0184 0x0334 0x0000 0x5 0x0
+#define MX93_PAD_UART2_RXD__LPUART2_RX                            0x0188 0x0338 0x0000 0x0 0x0
+#define MX93_PAD_UART2_RXD__LPUART1_CTS_B                         0x0188 0x0338 0x0000 0x1 0x0
+#define MX93_PAD_UART2_RXD__LPSPI2_SOUT                           0x0188 0x0338 0x0000 0x2 0x0
+#define MX93_PAD_UART2_RXD__TPM1_CH2                              0x0188 0x0338 0x0000 0x3 0x0
+#define MX93_PAD_UART2_RXD__SAI1_MCLK                             0x0188 0x0338 0x0448 0x4 0x0
+#define MX93_PAD_UART2_RXD__GPIO1_IO06                            0x0188 0x0338 0x0000 0x5 0x0
+#define MX93_PAD_UART2_TXD__LPUART2_TX                            0x018C 0x033C 0x0000 0x0 0x0
+#define MX93_PAD_UART2_TXD__LPUART1_RTS_B                         0x018C 0x033C 0x0000 0x1 0x0
+#define MX93_PAD_UART2_TXD__LPSPI2_SCK                            0x018C 0x033C 0x0000 0x2 0x0
+#define MX93_PAD_UART2_TXD__TPM1_CH3                              0x018C 0x033C 0x0000 0x3 0x0
+#define MX93_PAD_UART2_TXD__GPIO1_IO07                            0x018C 0x033C 0x0000 0x5 0x0
+#define MX93_PAD_PDM_CLK__PDM_CLK                                 0x0190 0x0340 0x0000 0x0 0x0
+#define MX93_PAD_PDM_CLK__MQS1_LEFT                               0x0190 0x0340 0x0000 0x1 0x0
+#define MX93_PAD_PDM_CLK__LPTMR1_ALT1                             0x0190 0x0340 0x0000 0x4 0x0
+#define MX93_PAD_PDM_CLK__GPIO1_IO08                              0x0190 0x0340 0x0000 0x5 0x0
+#define MX93_PAD_PDM_CLK__CAN1_TX                                 0x0190 0x0340 0x0000 0x6 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00                0x0194 0x0344 0x0438 0x0 0x2
+#define MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT                      0x0194 0x0344 0x0000 0x1 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1                     0x0194 0x0344 0x0000 0x2 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK                     0x0194 0x0344 0x0000 0x3 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2                     0x0194 0x0344 0x0000 0x4 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09                      0x0194 0x0344 0x0000 0x5 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__CAN1_RX                         0x0194 0x0344 0x0360 0x6 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01                0x0198 0x0348 0x043C 0x0 0x2
+#define MX93_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI                    0x0198 0x0348 0x0000 0x1 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1                     0x0198 0x0348 0x0000 0x2 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK                     0x0198 0x0348 0x0000 0x3 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3                     0x0198 0x0348 0x0000 0x4 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10                      0x0198 0x0348 0x0000 0x5 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1           0x0198 0x0348 0x0368 0x6 0x1
+#define MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC                          0x019C 0x034C 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_TXFS__SAI1_TX_DATA01                        0x019C 0x034C 0x0000 0x1 0x0
+#define MX93_PAD_SAI1_TXFS__LPSPI1_PCS0                           0x019C 0x034C 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_TXFS__LPUART2_DTR_B                         0x019C 0x034C 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_TXFS__MQS1_LEFT                             0x019C 0x034C 0x0000 0x4 0x0
+#define MX93_PAD_SAI1_TXFS__GPIO1_IO11                            0x019C 0x034C 0x0000 0x5 0x0
+#define MX93_PAD_SAI1_TXC__SAI1_TX_BCLK                           0x01A0 0x0350 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_TXC__LPUART2_CTS_B                          0x01A0 0x0350 0x0000 0x1 0x0
+#define MX93_PAD_SAI1_TXC__LPSPI1_SIN                             0x01A0 0x0350 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_TXC__LPUART1_DSR_B                          0x01A0 0x0350 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_TXC__CAN1_RX                                0x01A0 0x0350 0x0360 0x4 0x1
+#define MX93_PAD_SAI1_TXC__GPIO1_IO12                             0x01A0 0x0350 0x0000 0x5 0x0
+#define MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00                        0x01A4 0x0354 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_TXD0__LPUART2_RTS_B                         0x01A4 0x0354 0x0000 0x1 0x0
+#define MX93_PAD_SAI1_TXD0__LPSPI1_SCK                            0x01A4 0x0354 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_TXD0__LPUART1_DTR_B                         0x01A4 0x0354 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_TXD0__CAN1_TX                               0x01A4 0x0354 0x0000 0x4 0x0
+#define MX93_PAD_SAI1_TXD0__GPIO1_IO13                            0x01A4 0x0354 0x0000 0x5 0x0
+#define MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00                        0x01A8 0x0358 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_RXD0__SAI1_MCLK                             0x01A8 0x0358 0x0448 0x1 0x1
+#define MX93_PAD_SAI1_RXD0__LPSPI1_SOUT                           0x01A8 0x0358 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_RXD0__LPUART2_DSR_B                         0x01A8 0x0358 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_RXD0__MQS1_RIGHT                            0x01A8 0x0358 0x0000 0x4 0x0
+#define MX93_PAD_SAI1_RXD0__GPIO1_IO14                            0x01A8 0x0358 0x0000 0x5 0x0
+#define MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY                         0x01AC 0x035C 0x0000 0x0 0x0
+#define MX93_PAD_WDOG_ANY__GPIO1_IO15                             0x01AC 0x035C 0x0000 0x5 0x0
+
+#endif /* __DTS_IMX93_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
new file mode 100644
index 0000000000..3c5c67ebee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
+	compatible = "tq,imx93-tqma9352-mba93xxla",
+		     "tq,imx93-tqma9352", "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm5 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	clk_dp: clk-dp {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_3v8: regulator-3v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V8";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* TODO: this is supply for IOT module */
+		regulator-always-on;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	expander-irq-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PEX_INT#";
+	};
+
+	rtc-irq-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "RTC_EVENT#";
+	};
+};
+
+&gpio3 {
+	ethphy-eqos-irq-hog {
+		gpio-hog;
+		gpios = <26 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "ENET0_IRQ#";
+	};
+
+	ethphy-fec-irq-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "ENET1_IRQ#";
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "3V8_EN", "",
+				  "", "IOT_PWRKEY",
+				  "IOT_RESET", "IOT_W_DISABLE",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		/*
+		 * Controls the IOT W_DISABLE pin which is low active
+		 * as disable signal but inverted as seen from the CPU.
+		 * The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		iot_wdisable_hog: iot-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "IOT_W_DISABLE";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BL_EN", "DP_EN",
+				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5>;
+	status = "okay";
+
+	dp_bridge: dp-bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		clock-names = "ref";
+		clocks = <&clk_dp>;
+		reset-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+		toshiba,hpd-pin = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp_dsi_in: endpoint {
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# is connected on MBa93xxLA */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x51e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1306
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+		>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x1306
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX		0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX		0x139e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14		0x1306
+		>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1306
+		>;
+	};
+
+	pinctrl_tc9595: tc9595-grp {
+		fsl,pins = <
+			/* DP_IRQ */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29		0x1306
+		>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO06__TPM5_CH0		0x57e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__GPIO1_IO02		0x1306
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
+			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x51e
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO14__LPUART3_TX		0x31e
+			MX93_PAD_GPIO_IO15__LPUART3_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO04__LPUART6_TX		0x31e
+			MX93_PAD_GPIO_IO05__LPUART6_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
+			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17be
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			/* HYS | PD | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
new file mode 100644
index 0000000000..f6e422dc26
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ */
+
+#include "imx93.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM";
+	compatible = "tq,imx93-tqma9352", "fsl,imx93";
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x60000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	reg_v1v8: regulator-v1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* SD2 RST# via PMIC SW_EN */
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_v3v3>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_v1v8>;
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/*
+		 * no DQS, RXCLKSRC internal loop back, max 66 MHz
+		 * clk framework uses CLK_DIVIDER_ROUND_CLOSEST
+		 * selected value together with root from
+		 * IMX93_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
+		 * respect the maximum value.
+		 */
+		spi-max-frequency = <62000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&gpio1 {
+	pmic-irq-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PMIC_IRQ#";
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	se97_som: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom0: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_v3v3>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_v3v3>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @57) */
+	eeprom@5f {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x5f>;
+		size = <32>;
+		pagesize = <32>;
+		vcc-supply = <&reg_v3v3>;
+	};
+
+	imu@6a {
+		compatible = "st,ism330dhcx";
+		reg = <0x6a>;
+		vdd-supply = <&reg_v3v3>;
+		vddio-supply = <&reg_v3v3>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B	0x3fe
+			MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK	0x3fe
+			MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00	0x3fe
+			MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01	0x3fe
+			MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02	0x3fe
+			MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03	0x3fe
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_pca9451: pca9451grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SDA__GPIO1_IO03		0x1306
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x1306
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			/* HYS | PU | PD | FSEL_3 | X5 */
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x17be
+			/* HYS | PU | FSEL_3 | X5 */
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13be
+			/* HYS | PU | FSEL_3 | X4 */
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x139e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x139e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x139e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x139e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x139e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x139e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x139e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x139e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
new file mode 100644
index 0000000000..943b7e6655
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -0,0 +1,928 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/fsl,imx93-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx93-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <10000>;
+				exit-latency-us = <7000>;
+				min-residency-us = <27000>;
+				wakeup-latency-us = <15000>;
+			};
+		};
+
+		A55_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+		};
+
+		A55_1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+		};
+
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48040000 0 0xc0000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx93-cm33";
+		clocks = <&clk IMX93_CLK_CM33_GATE>;
+		status = "disabled";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x80000000>,
+			 <0x28000000 0x0 0x28000000 0x10000000>;
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aonmix_ns_gpr: syscon@44210000 {
+				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
+				reg = <0x44210000 0x1000>;
+			};
+
+			mu1: mailbox@44230000 {
+				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+				reg = <0x44230000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_MU1_B_GATE>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			wdog1: watchdog@442d0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442d0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG1_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@442e0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442e0000 0x10000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG2_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM1_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM2_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_CAN1_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@443c0000 {
+				compatible = "fsl,imx93-iomuxc";
+				reg = <0x443c0000 0x10000>;
+				status = "okay";
+			};
+
+			bbnsm: bbnsm@44440000 {
+				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+				reg = <0x44440000 0x10000>;
+
+				bbnsm_rtc: rtc {
+					compatible = "nxp,imx93-bbnsm-rtc";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				bbnsm_pwrkey: pwrkey {
+					compatible = "nxp,imx93-bbnsm-pwrkey";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+					linux,code = <KEY_POWER>;
+				};
+			};
+
+			clk: clock-controller@44450000 {
+				compatible = "fsl,imx93-ccm";
+				reg = <0x44450000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				status = "okay";
+			};
+
+			src: system-controller@44460000 {
+				compatible = "fsl,imx93-src", "syscon";
+				reg = <0x44460000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				mlmix: power-domain@44461800 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44461800 0x400>, <0x44464800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_ML_APB>,
+						 <&clk IMX93_CLK_ML>;
+				};
+
+				mediamix: power-domain@44462400 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44462400 0x400>, <0x44465800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+						 <&clk IMX93_CLK_MEDIA_APB>;
+				};
+			};
+
+			anatop: anatop@44480000 {
+				compatible = "fsl,imx93-anatop", "syscon";
+				reg = <0x44480000 0x2000>;
+			};
+
+			tmu: tmu@44482000 {
+				compatible = "fsl,qoriq-tmu";
+				reg = <0x44482000 0x1000>;
+				clocks = <&clk IMX93_CLK_TMC_GATE>;
+				little-endian;
+				fsl,tmu-range = <0x800000da 0x800000e9
+						 0x80000102 0x8000012a
+						 0x80000166 0x800001a7
+						 0x800001b6>;
+				fsl,tmu-calibration = <0x00000000 0x0000000e
+						       0x00000001 0x00000029
+						       0x00000002 0x00000056
+						       0x00000003 0x000000a2
+						       0x00000004 0x00000116
+						       0x00000005 0x00000195
+						       0x00000006 0x000001b2>;
+				#thermal-sensor-cells = <1>;
+			};
+
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ADC1_GATE>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			wakeupmix_gpr: syscon@42420000 {
+				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
+				reg = <0x42420000 0x1000>;
+			};
+
+			mu2: mailbox@42440000 {
+				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+				reg = <0x42440000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_MU2_B_GATE>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog4: watchdog@424a0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424a0000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG4_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog5: watchdog@424b0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424b0000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG5_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM3_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM4_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM5_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM6_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_CAN2_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
+				status = "disabled";
+			};
+
+			flexspi1: spi@425e0000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
+					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC1_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <8>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC2_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			fec: ethernet@42890000 {
+				compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x42890000 0x10000>;
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER1>,
+					 <&clk IMX93_CLK_ENET_REF>,
+					 <&clk IMX93_CLK_ENET_REF_PHY>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+						  <&clk IMX93_CLK_ENET_REF>,
+						  <&clk IMX93_CLK_ENET_REF_PHY>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>, <50000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+				status = "disabled";
+			};
+
+			eqos: ethernet@428a0000 {
+				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x428a0000 0x10000>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER2>,
+					 <&clk IMX93_CLK_ENET>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
+						  <&clk IMX93_CLK_ENET>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>;
+				intf_mode = <&wakeupmix_gpr 0x28>;
+				snps,clk-csr = <0>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@428b0000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x428b0000 0x10000>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC3_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810080 {
+			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x43810080 0x1000>, <0x43810040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
+				 <&clk IMX93_CLK_GPIO2_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 4 30>;
+		};
+
+		gpio3: gpio@43820080 {
+			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x43820080 0x1000>, <0x43820040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
+				 <&clk IMX93_CLK_GPIO3_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
+		};
+
+		gpio4: gpio@43830080 {
+			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x43830080 0x1000>, <0x43830040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
+				 <&clk IMX93_CLK_GPIO4_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
+		};
+
+		gpio1: gpio@47400080 {
+			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x47400080 0x1000>, <0x47400040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
+				 <&clk IMX93_CLK_GPIO1_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 92 16>;
+		};
+
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx93-ocotp", "syscon";
+			reg = <0x47510000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		s4muap: mailbox@47520000 {
+			compatible = "fsl,imx93-mu-s4";
+			reg = <0x47520000 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			#mbox-cells = <2>;
+		};
+
+		media_blk_ctrl: system-controller@4ac10000 {
+			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+			reg = <0x4ac10000 0x10000>;
+			power-domains = <&mediamix>;
+			clocks = <&clk IMX93_CLK_MEDIA_APB>,
+				 <&clk IMX93_CLK_MEDIA_AXI>,
+				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+				 <&clk IMX93_CLK_CAM_PIX>,
+				 <&clk IMX93_CLK_PXP_GATE>,
+				 <&clk IMX93_CLK_LCDIF_GATE>,
+				 <&clk IMX93_CLK_ISI_GATE>,
+				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
+				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
+			clock-names = "apb", "axi", "nic", "disp", "cam",
+				      "pxp", "lcdif", "isi", "csi", "dsi";
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		ddr-pmu@4e300dc0 {
+			compatible = "fsl,imx93-ddr-pmu";
+			reg = <0x4e300dc0 0x200>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
new file mode 100644
index 0000000000..8a9fe5cdcc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/* TQ-Systems GmbH MBa8Mx baseboard */
+
+/ {
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 250000 0>;
+		beeper-hz = <4000>;
+		amp-supply = <&reg_vcc_3v3>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobutton>;
+		autorepeat;
+
+		switch-1 {
+			label = "switch1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		btn2: switch-2 {
+			label = "switch2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-3 {
+			label = "switch3";
+			linux,code = <BTN_2>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2: led2 {
+			label = "led2";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_hub_vbus: regulator-hub-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8MX_HUB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_sn65dsi83_1v8: regulator-sn65dsi83-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "SN65DSI83_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&expander0 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8MX_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&sai3>;
+		audio-codec = <&tlv320aic3x04>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_vcc_3v3>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@e {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0xe>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			enet-phy-lane-no-swap;
+			reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <500>;
+		};
+	};
+};
+
+&i2c1 {
+	expander0: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		sd-mux-oe-hog {
+			gpio-hog;
+			gpios = <8 0>;
+			output-low;
+			line-name = "SD_MUX_EN#";
+		};
+
+		boot-cfg-oe-hog {
+			gpio-hog;
+			gpios = <12 0>;
+			output-high;
+			line-name = "BOOT_CFG_OE#";
+		};
+
+		rst-usb-hub-hog {
+			gpio-hog;
+			gpios = <13 0>;
+			output-high;
+			line-name = "RST_USB_HUB#";
+		};
+	};
+
+	expander1: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		reset-gpios = <&expander2 0 GPIO_ACTIVE_LOW>;
+		iov-supply = <&reg_vcc_3v3>;
+		ldoin-supply = <&reg_vcc_3v3>;
+	};
+
+	sensor1: temperator-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	eeprom3: eeprom@57 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	#sound-dai-cells = <0>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
new file mode 100644
index 0000000000..ff1aba5fae
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ BMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ */
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		/*
+		 * bootloader fix-ups are expected to provide the
+		 * "fsl,bman-portal-<hardware revision>" compatible
+		 */
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x4000000 0x4000>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@50000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@60000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@70000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@80000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@90000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 0000000000..dbd2fc3ba7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 10g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+		pcsphy-handle = <&pcsphy6>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+
+		pcsphy6: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 0000000000..6fc5d25600
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 10g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+		pcsphy-handle = <&pcsphy7>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+
+		pcsphy7: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 0000000000..4e02276fcf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 0000000000..0312fa43fa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 0000000000..af2df07971
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #2 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy2>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+
+		pcsphy2: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 0000000000..4ac98dc8b2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy3>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+
+		pcsphy3: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 0000000000..bd932d8b01
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #4 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy4>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+
+		pcsphy4: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 0000000000..7de1c5203f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #5 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman0_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy5>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+
+		pcsphy5: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
new file mode 100644
index 0000000000..ae1c2abaaf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+
+fman0: fman@1a00000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0x0 0x0 0x1a00000 0xfe000>;
+	reg = <0x0 0x1a00000 0x0 0xfe000>;
+	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clockgen QORIQ_CLK_FMAN 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+	ptimer-handle = <&ptp_timer0>;
+	dma-coherent;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+};
+
+ptp_timer0: ptp-timer@1afe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x0 0x1afe000 0x0 0x1000>;
+	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clockgen QORIQ_CLK_FMAN 0>;
+	fsl,extts-fifo;
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
new file mode 100644
index 0000000000..e3bec08b11
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ QMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ */
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		/*
+		 * bootloader fix-ups are expected to provide the
+		 * "fsl,bman-portal-<hardware revision>" compatible
+		 */
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x4000000 0x4000>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <0>;
+	};
+
+	qportal1: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <1>;
+	};
+
+	qportal2: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <2>;
+	};
+
+	qportal3: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <3>;
+	};
+
+	qportal4: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <4>;
+	};
+
+	qportal5: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <5>;
+	};
+
+	qportal6: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <6>;
+	};
+
+	qportal7: qman-portal@70000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <7>;
+	};
+
+	qportal8: qman-portal@80000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <8>;
+	};
+
+	qportal9: qman-portal@90000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <9>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
new file mode 100644
index 0000000000..5ac1cc9ff5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * NXP S32G2 SoC family
+ *
+ * Copyright (c) 2021 SUSE LLC
+ * Copyright (c) 2017-2021 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "nxp,s32g2";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	firmware {
+		psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x80000000>;
+
+		uart0: serial@401c8000 {
+			compatible = "nxp,s32g2-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401c8000 0x3000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		uart1: serial@401cc000 {
+			compatible = "nxp,s32g2-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401cc000 0x3000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		uart2: serial@402bc000 {
+			compatible = "nxp,s32g2-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x402bc000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@50800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x50800000 0x10000>,
+			      <0x50880000 0x80000>,
+			      <0x50400000 0x2000>,
+			      <0x50410000 0x2000>,
+			      <0x50420000 0x2000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
new file mode 100644
index 0000000000..9118d8d2ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 SUSE LLC
+ * Copyright (c) 2019-2021 NXP
+ */
+
+/dts-v1/;
+
+#include "s32g2.dtsi"
+
+/ {
+	model = "NXP S32G2 Evaluation Board (S32G-VNP-EVB)";
+	compatible = "nxp,s32g274a-evb", "nxp,s32g2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 4GiB RAM */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>,
+		      <0x8 0x80000000 0 0x80000000>;
+	};
+};
+
+/* UART (J58) to Micro USB port */
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
new file mode 100644
index 0000000000..e05ee854cd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 SUSE LLC
+ * Copyright (c) 2019-2021 NXP
+ */
+
+/dts-v1/;
+
+#include "s32g2.dtsi"
+
+/ {
+	model = "NXP S32G2 Reference Design Board 2 (S32G-VNP-RDB2)";
+	compatible = "nxp,s32g274a-rdb2", "nxp,s32g2";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 4GiB RAM */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>,
+		      <0x8 0x80000000 0 0x80000000>;
+	};
+};
+
+/* UART (J2) to Micro USB port */
+&uart0 {
+	status = "okay";
+};
+
+/* UART (J1) to Micro USB port */
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32v234-evb.dts b/arch/arm64/boot/dts/freescale/s32v234-evb.dts
new file mode 100644
index 0000000000..4b802518ce
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32v234-evb.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016-2017 NXP
+ */
+
+/dts-v1/;
+#include "s32v234.dtsi"
+
+/ {
+	model = "NXP S32V234-EVB2 Board";
+	compatible = "fsl,s32v234-evb", "fsl,s32v234";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi
new file mode 100644
index 0000000000..42409ec567
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016-2018 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	compatible = "fsl,s32v234";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster0_l2_cache>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster0_l2_cache>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster1_l2_cache>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster1_l2_cache>;
+		};
+
+		cluster0_l2_cache: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2_cache: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		/* clock-frequency might be modified by u-boot, depending on the
+		 * chip version.
+		 */
+		clock-frequency = <10000000>;
+	};
+
+	gic: interrupt-controller@7d001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x7d001000 0 0x1000>,
+		      <0 0x7d002000 0 0x2000>,
+		      <0 0x7d004000 0 0x2000>,
+		      <0 0x7d006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		aips0: bus@40000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			reg = <0x0 0x40000000 0x0 0x7d000>;
+			ranges;
+
+			uart0: serial@40053000 {
+				compatible = "fsl,s32v234-linflexuart";
+				reg = <0x0 0x40053000 0x0 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		aips1: bus@40080000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			reg = <0x0 0x40080000 0x0 0x70000>;
+			ranges;
+
+			uart1: serial@400bc000 {
+				compatible = "fsl,s32v234-linflexuart";
+				reg = <0x0 0x400bc000 0x0 0x1000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
new file mode 100644
index 0000000000..f4d68caeba
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3670-hikey970.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
new file mode 100644
index 0000000000..79a55a0fa2
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * dtsi for Hisilicon Hi3660 Coresight
+ *
+ * Copyright (C) 2016-2018 HiSilicon Ltd.
+ *
+ * Author: Wanglai Shi <shiwanglai@hisilicon.com>
+ *
+ */
+/ {
+	soc {
+		/* A53 cluster internals */
+		etm@ecc40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xecc40000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@ecd40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xecd40000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@ece40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xece40000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@ecf40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xecf40000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		funnel@ec801000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xec801000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					cluster0_funnel_out: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster0_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster0_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster0_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					cluster0_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		etf@ec802000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xec802000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					cluster0_etf_in: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					cluster0_etf_out: endpoint {
+						remote-endpoint =
+							<&combo_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		/* A73 cluster internals */
+		etm@ed440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xed440000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu4>;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@ed540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xed540000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu5>;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@ed640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xed640000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu6>;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@ed740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xed740000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu7>;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		funnel@ed001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xed001000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					cluster1_funnel_out: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster1_funnel_in0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster1_funnel_in1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster1_funnel_in2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					cluster1_funnel_in3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etf@ed002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xed002000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					cluster1_etf_in: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					cluster1_etf_out: endpoint {
+						remote-endpoint =
+							<&combo_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		/* An invisible combo funnel between clusters and top funnel */
+		funnel {
+			compatible = "arm,coresight-static-funnel";
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					combo_funnel_out: endpoint {
+						remote-endpoint =
+							<&top_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					combo_funnel_in0: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					combo_funnel_in1: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_out>;
+					};
+				};
+			};
+		};
+
+		/* Top internals */
+		funnel@ec031000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xec031000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					top_funnel_out: endpoint {
+						remote-endpoint =
+							<&top_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					top_funnel_in: endpoint {
+						remote-endpoint =
+							<&combo_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@ec036000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xec036000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					top_etf_in: endpoint {
+						remote-endpoint =
+							<&top_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					top_etf_out: endpoint {
+						remote-endpoint =
+							<&replicator_in>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-static-replicator";
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint =
+							<&top_etf_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator0_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator0_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+		};
+
+		etr@ec033000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xec033000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+							<&replicator0_out0>;
+					};
+				};
+			};
+		};
+
+		tpiu@ec032000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0 0xec032000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint =
+							<&replicator0_out1>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
new file mode 100644
index 0000000000..3f13a960f3
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -0,0 +1,697 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey960 Development Board
+ *
+ * Copyright (C) 2016, HiSilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3660.dtsi"
+#include "hikey960-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "HiKey960";
+	compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+
+	aliases {
+		mshc1 = &dwmmc1;
+		mshc2 = &dwmmc2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial6:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* rewrite this at bootloader */
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@32000000 {
+			compatible = "ramoops";
+			reg = <0x0 0x32000000 0x0 0x00100000>;
+			record-size = <0x00020000>;
+			console-size = <0x00020000>;
+			ftrace-size = <0x00020000>;
+		};
+	};
+
+	reboot-mode-syscon@32100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x32100000 0x0 0x00001000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x0>;
+
+			mode-normal = <0x77665501>;
+			mode-bootloader = <0x77665500>;
+			mode-recovery = <0x77665502>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
+
+		key-power {
+			wakeup-source;
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user-1 {
+			label = "green:user1";
+			/* gpio_150_user_led1 */
+			gpios = <&gpio18 6 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user-2 {
+			label = "green:user2";
+			/* gpio_151_user_led2 */
+			gpios = <&gpio18 7 0>;
+			linux,default-trigger = "none";
+		};
+
+		led-user-3 {
+			label = "green:user3";
+			/* gpio_189_user_led3 */
+			gpios = <&gpio23 5 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-user-4 {
+			label = "green:user4";
+			/* gpio_190_user_led4 */
+			gpios = <&gpio23 6 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			/* gpio_205_wifi_active */
+			gpios = <&gpio25 5 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-bt {
+			label = "blue:bt";
+			gpios = <&gpio25 7 0>;
+			/* gpio_207_user_led1 */
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	pmic: pmic@fff34000 {
+		compatible = "hisilicon,hi6421v530-pmic";
+		reg = <0x0 0xfff34000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			ldo3: LDO3 { /* HDMI */
+				regulator-name = "VOUT3_1V85";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo9: LDO9 { /* SDCARD I/O */
+				regulator-name = "VOUT9_1V8_2V95";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			ldo11: LDO11 { /* Low Speed Connector */
+				regulator-name = "VOUT11_1V8_2V95";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			ldo15: LDO15 { /* UFS VCC */
+				regulator-name = "VOUT15_3V0";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo16: LDO16 { /* SD VDD */
+				regulator-name = "VOUT16_2V95";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+		};
+	};
+
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/* GPIO_051_WIFI_EN */
+		gpio = <&gpio6 3 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from "HiKey 960 Board ver A" schematics
+ * from Huawei. The 40 pin low speed expansion connector is named
+ * J2002 63453-140LF.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	/* GPIO_000-GPIO_007 */
+	gpio-line-names =
+		"",
+		"TP901", /* TEST_MODE connected to TP901 */
+		"[PMU0_SSI]",
+		"[PMU1_SSI]",
+		"[PMU2_SSI]",
+		"[PMU0_CLKOUT]",
+		"[JTAG_TCK]",
+		"[JTAG_TMS]";
+};
+
+&gpio1 {
+	/* GPIO_008-GPIO_015 */
+	gpio-line-names =
+		"[JTAG_TRST_N]",
+		"[JTAG_TDI]",
+		"[JTAG_TDO]",
+		"NC", "NC",
+		"[I2C3_SCL]",
+		"[I2C3_SDA]",
+		"NC";
+};
+
+&gpio2 {
+	/* GPIO_016-GPIO_023 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO-J", /* LSEC pin 32: GPIO_019 */
+		"GPIO_020_HDMI_SEL",
+		"GPIO-L", /* LSEC pin 34: GPIO_021 */
+		"GPIO_022_UFSBUCK_INT_N",
+		"GPIO-G"; /* LSEC pin 29: LCD_TE0 */
+};
+
+&gpio3 {
+	/* GPIO_024-GPIO_031 */
+	/* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */
+	gpio-line-names =
+		"[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
+		"[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
+		"NC",
+		"[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
+		"[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
+		"[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
+		"[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */
+		"NC";
+};
+
+&gpio4 {
+	/* GPIO_032-GPIO_039 */
+	gpio-line-names =
+		"NC", "NC",
+		"PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */
+		"GPIO_035_PMU2_EN",
+		"GPIO_036_USB_HUB_RESET",
+		"NC", "NC", "NC";
+};
+
+&gpio5 {
+	/* GPIO_040-GPIO_047 */
+	gpio-line-names =
+		"GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */
+		"GPIO_041_HDMI_PD",
+		"TP904", /* Test point */
+		"TP905", /* Test point */
+		"NC", "NC",
+		"GPIO_046_HUB_VDD33_EN",
+		"GPIO_047_PMU1_EN";
+};
+
+&gpio6 {
+	/* GPIO_048-GPIO_055 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO_051_WIFI_EN",
+		"GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */
+		/*
+		 * These two pins should be used for SD(IO) data according to the
+		 * 96boards specification but seems to be repurposed for a IRDA UART.
+		 * They are however named according to the spec.
+		 */
+		"[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */
+		"[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */
+		"[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */
+};
+
+&gpio7 {
+	/* GPIO_056-GPIO_063 */
+	gpio-line-names =
+		"[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
+		"[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */
+		"[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */
+		"[UART0_RXD]", /* LSEC pin 7: UART3_RXD */
+		"[UART0_TXD]", /* LSEC pin 5: UART3_TXD */
+		"[SOC_BT_UART4_CTS_N]",
+		"[SOC_BT_UART4_RTS_N]",
+		"[SOC_BT_UART4_RXD]";
+};
+
+&gpio8 {
+	/* GPIO_064-GPIO_071 */
+	gpio-line-names =
+		"[SOC_BT_UART4_TXD]",
+		"NC",
+		"[PMU_HKADC_SSI]",
+		"NC",
+		"GPIO_068_SEL",
+		"NC", "NC", "NC";
+
+};
+
+&gpio9 {
+	/* GPIO_072-GPIO_079 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */
+		"NC", "NC", "NC", "NC";
+};
+
+&gpio10 {
+	/* GPIO_080-GPIO_087 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio11 {
+	/* GPIO_088-GPIO_095 */
+	gpio-line-names =
+		"NC",
+		"[PCIE_PERST_N]",
+		"NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio12 {
+	/* GPIO_096-GPIO_103 */
+	gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC";
+};
+
+&gpio13 {
+	/* GPIO_104-GPIO_111 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio14 {
+	/* GPIO_112-GPIO_119 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio15 {
+	/* GPIO_120-GPIO_127 */
+	gpio-line-names =
+		"NC", "NC", "NC", "NC", "NC", "NC",
+		"GPIO_126_BT_EN",
+		"TP902"; /* GPIO_127_JTAG_SEL0 */
+};
+
+&gpio16 {
+	/* GPIO_128-GPIO_135 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio17 {
+	/* GPIO_136-GPIO_143 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio18 {
+	/* GPIO_144-GPIO_151 */
+	gpio-line-names =
+		"[UFS_REF_CLK]",
+		"[UFS_RST_N]",
+		"[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */
+		"[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */
+		"[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */
+		"[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */
+		"GPIO_150_USER_LED1",
+		"GPIO_151_USER_LED2";
+};
+
+&gpio19 {
+	/* GPIO_152-GPIO_159 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", "";
+};
+
+&gpio20 {
+	/* GPIO_160-GPIO_167 */
+	gpio-line-names =
+		"[SD_CLK]",
+		"[SD_CMD]",
+		"[SD_DATA0]",
+		"[SD_DATA1]",
+		"[SD_DATA2]",
+		"[SD_DATA3]",
+		"", "";
+};
+
+&gpio21 {
+	/* GPIO_168-GPIO_175 */
+	gpio-line-names =
+		"[WL_SDIO_CLK]",
+		"[WL_SDIO_CMD]",
+		"[WL_SDIO_DATA0]",
+		"[WL_SDIO_DATA1]",
+		"[WL_SDIO_DATA2]",
+		"[WL_SDIO_DATA3]",
+		"", "";
+};
+
+&gpio22 {
+	/* GPIO_176-GPIO_183 */
+	gpio-line-names =
+		"[GPIO_176_PMU_PWR_HOLD]",
+		"NA",
+		"[SYSCLK_EN]",
+		"GPIO_179_WL_WAKEUP_AP",
+		"GPIO_180_HDMI_INT",
+		"NA",
+		"GPIO-F", /* LSEC pin 28: LCD_BL_PWM */
+		"[I2C0_SCL]"; /* LSEC pin 15 */
+};
+
+&gpio23 {
+	/* GPIO_184-GPIO_191 */
+	gpio-line-names =
+		"[I2C0_SDA]", /* LSEC pin 17 */
+		"[I2C1_SCL]", /* Actual SoC I2C1 */
+		"[I2C1_SDA]", /* Actual SoC I2C1 */
+		"[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
+		"[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */
+		"GPIO_189_USER_LED3",
+		"GPIO_190_USER_LED4",
+		"";
+};
+
+&gpio24 {
+	/* GPIO_192-GPIO_199 */
+	gpio-line-names =
+		"[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */
+		"[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */
+		"[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */
+		"[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */
+		"[GPIO_196_I2S2_DI]",
+		"[GPIO_197_I2S2_DO]",
+		"[GPIO_198_I2S2_XCLK]",
+		"[GPIO_199_I2S2_XFS]";
+};
+
+&gpio25 {
+	/* GPIO_200-GPIO_207 */
+	gpio-line-names =
+		"NC",
+		"NC",
+		"GPIO_202_VBUS_TYPEC",
+		"GPIO_203_SD_DET",
+		"GPIO_204_PMU12_IRQ_N",
+		"GPIO_205_WIFI_ACTIVE",
+		"GPIO_206_USBSW_SEL",
+		"GPIO_207_BT_ACTIVE";
+};
+
+&gpio26 {
+	/* GPIO_208-GPIO_215 */
+	gpio-line-names =
+		"GPIO-A", /* LSEC pin 23: GPIO_208 */
+		"GPIO-B", /* LSEC pin 24: GPIO_209 */
+		"GPIO-C", /* LSEC pin 25: GPIO_210 */
+		"GPIO-D", /* LSEC pin 26: GPIO_211 */
+		"GPIO-E", /* LSEC pin 27: GPIO_212 */
+		"[PCIE_CLKREQ_N]",
+		"[PCIE_WAKE_N]",
+		"[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */
+};
+
+&gpio27 {
+	/* GPIO_216-GPIO_223 */
+	gpio-line-names =
+		"[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */
+		"[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */
+		"[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */
+		"GPIO_219_CC_INT",
+		"NC",
+		"NC",
+		"[PMU_INT]",
+		"";
+};
+
+&gpio28 {
+	/* GPIO_224-GPIO_231 */
+	gpio-line-names =
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "okay";
+		interrupt-parent = <&gpio27>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@1 {
+					reg = <1>;
+					usb_con_ss: endpoint {
+						remote-endpoint = <&dwc3_ss>;
+					};
+				};
+			};
+		};
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+		};
+	};
+
+	adv7533: adv7533@39 {
+		status = "okay";
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+		adi,dsi-lanes = <4>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&uart3 {
+	/* On Low speed expansion */
+	label = "LS-UART0";
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
+};
+
+&uart6 {
+	/* On Low speed expansion */
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&spi2 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&spi3 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&dwmmc1 {
+	bus-width = <0x4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+	cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pmx_func
+		     &sd_clk_cfg_func
+		     &sd_cfg_func>;
+	vmmc-supply = <&ldo16>;
+	vqmmc-supply = <&ldo9>;
+	status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+	bus-width = <0x4>;
+	non-removable;
+	broken-cd;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pmx_func
+		     &sdio_clk_cfg_func
+		     &sdio_cfg_func>;
+	/* WL_EN */
+	vmmc-supply = <&wlan_en>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;      /* sdio func num */
+		/* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
+		interrupt-parent = <&gpio22>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&dwc3 { /* USB */
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phy_type = "utmi";
+	snps,dis-del-phy-power-chg-quirk;
+	snps,lfps_filter_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,tx_de_emphasis_quirk;
+	snps,tx_de_emphasis = <1>;
+	snps,dis_enblslpm_quirk;
+	snps,gctl-reset-quirk;
+	usb-role-switch;
+	role-switch-default-mode = "host";
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&rt1711h_ep>;
+		};
+
+		dwc3_ss: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
new file mode 100644
index 0000000000..7e137a884a
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -0,0 +1,1199 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi3660 SoC
+ *
+ * Copyright (C) 2016, HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi3660-clock.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "hisilicon,hi3660";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <110>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <550>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <650>;
+				min-residency-us = <1500>;
+			};
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1600>;
+				min-residency-us = <3500>;
+			};
+
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <550>;
+				min-residency-us = <1500>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <800>;
+				exit-latency-us = <2900>;
+				min-residency-us = <3500>;
+			};
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		A73_L2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <533000000>;
+			opp-microvolt = <700000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp01 {
+			opp-hz = /bits/ 64 <999000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp02 {
+			opp-hz = /bits/ 64 <1402000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp03 {
+			opp-hz = /bits/ 64 <1709000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp04 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp10 {
+			opp-hz = /bits/ 64 <903000000>;
+			opp-microvolt = <700000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp11 {
+			opp-hz = /bits/ 64 <1421000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp12 {
+			opp-hz = /bits/ 64 <1805000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp13 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp14 {
+			opp-hz = /bits/ 64 <2362000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	gic: interrupt-controller@e82b0000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+		      <0x0 0xe82b2000 0 0x2000>, /* GICC */
+		      <0x0 0xe82b4000 0 0x2000>, /* GICH */
+		      <0x0 0xe82b6000 0 0x2000>; /* GICV */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	a73-pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		crg_ctrl: crg_ctrl@fff35000 {
+			compatible = "hisilicon,hi3660-crgctrl", "syscon";
+			reg = <0x0 0xfff35000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		crg_rst: crg_rst_controller {
+			compatible = "hisilicon,hi3660-reset";
+			#reset-cells = <2>;
+			hisi,rst-syscon = <&crg_ctrl>;
+		};
+
+
+		pctrl: pctrl@e8a09000 {
+			compatible = "hisilicon,hi3660-pctrl", "syscon";
+			reg = <0x0 0xe8a09000 0x0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		pmuctrl: crg_ctrl@fff34000 {
+			compatible = "hisilicon,hi3660-pmuctrl", "syscon";
+			reg = <0x0 0xfff34000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sctrl: sctrl@fff0a000 {
+			compatible = "hisilicon,hi3660-sctrl", "syscon";
+			reg = <0x0 0xfff0a000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		iomcu: iomcu@ffd7e000 {
+			compatible = "hisilicon,hi3660-iomcu", "syscon";
+			reg = <0x0 0xffd7e000 0x0 0x1000>;
+			#clock-cells = <1>;
+
+		};
+
+		iomcu_rst: reset {
+			compatible = "hisilicon,hi3660-reset";
+			hisi,rst-syscon = <&iomcu>;
+			#reset-cells = <2>;
+		};
+
+		mailbox: mailbox@e896b000 {
+			compatible = "hisilicon,hi3660-mbox";
+			reg = <0x0 0xe896b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <3>;
+		};
+
+		stub_clock: stub_clock@e896b500 {
+			compatible = "hisilicon,hi3660-stub-clk";
+			reg = <0x0 0xe896b500 0x0 0x0100>;
+			#clock-cells = <1>;
+			mboxes = <&mailbox 13 3 0>;
+		};
+
+		dual_timer0: timer@fff14000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfff14000 0x0 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		i2c0: i2c@ffd71000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd71000 0x0 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
+			resets = <&iomcu_rst 0x20 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffd72000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd72000 0x0 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>;
+			resets = <&iomcu_rst 0x20 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@fdf0c000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>;
+			resets = <&crg_rst 0x78 7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@fdf0b000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>;
+			resets = <&crg_rst 0x60 14>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>;
+			status = "disabled";
+		};
+
+		uart0: serial@fdf02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf02000 0x0 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			status = "disabled";
+		};
+
+		uart1: serial@fdf00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas = <&dma0 2 &dma0 3>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART1>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+			status = "disabled";
+		};
+
+		uart2: serial@fdf03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf03000 0x0 0x1000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas = <&dma0 4 &dma0 5>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			status = "disabled";
+		};
+
+		uart3: serial@ffd74000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xffd74000 0x0 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			status = "disabled";
+		};
+
+		uart4: serial@fdf01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf01000 0x0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas = <&dma0 6 &dma0 7>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART4>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			status = "disabled";
+		};
+
+		uart5: serial@fdf05000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf05000 0x0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas = <&dma0 8 &dma0 9>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART5>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>;
+			status = "disabled";
+		};
+
+		uart6: serial@fff32000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfff32000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_UART6>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
+			status = "disabled";
+		};
+
+		dma0: dma@fdf30000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0x0 0xfdf30000 0x0 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+			dma-channel-mask = <0xfffe>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>;
+			dma-no-cci;
+			dma-type = "hi3660_dma";
+		};
+
+		asp_dmac: dma-controller@e804b000 {
+			compatible = "hisilicon,hisi-pcm-asp-dma-1.0";
+			reg = <0x0 0xe804b000 0x0 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "asp_dma_irq";
+		};
+
+		rtc0: rtc@fff04000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0Xfff04000 0x0 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio0: gpio@e8a0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0b000 0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 0 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@e8a0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0c000 0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 7 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e8a0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0d000 0 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 14 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e8a0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0e000 0 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 22 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e8a0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0f000 0 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 30 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@e8a10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a10000 0 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 38 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@e8a11000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a11000 0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 46 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@e8a12000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a12000 0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 54 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@e8a13000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a13000 0 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 62 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@e8a14000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a14000 0 0x1000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 70 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@e8a15000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a15000 0 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 78 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@e8a16000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a16000 0 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 86 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@e8a17000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a17000 0 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@e8a18000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a18000 0 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 102 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@e8a19000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a19000 0 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 110 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@e8a1a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1a000 0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 118 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@e8a1b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1b000 0 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@e8a1c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1c000 0 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@ff3b4000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xff3b4000 0 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx2 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@ff3b5000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xff3b5000 0 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx2 0 8 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@e8a1f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1f000 0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 0 0 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@e8a20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a20000 0 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx3 0 0 6>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO21>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio22: gpio@fff0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0b000 0 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO176 */
+			gpio-ranges = <&pmx4 2 0 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio23: gpio@fff0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0c000 0 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO184 */
+			gpio-ranges = <&pmx4 0 6 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio24: gpio@fff0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0d000 0 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO192 */
+			gpio-ranges = <&pmx4 0 13 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio25: gpio@fff0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0e000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO200 */
+			gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio26: gpio@fff0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0f000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO208 */
+			gpio-ranges = <&pmx4 0 28 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio27: gpio@fff10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff10000 0 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO216 */
+			gpio-ranges = <&pmx4 0 36 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio28: gpio@fff1d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff1d000 0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		spi2: spi@ffd68000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xffd68000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>, <&crg_ctrl HI3660_CLK_GATE_SPI2>;
+			clock-names = "sspclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pmx_func &spi2_cfg_func>;
+			num-cs = <1>;
+			cs-gpios = <&gpio27 2 0>;
+			status = "disabled";
+		};
+
+		spi3: spi@ff3b3000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xff3b3000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>, <&crg_ctrl HI3660_CLK_GATE_SPI3>;
+			clock-names = "sspclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_pmx_func &spi3_cfg_func>;
+			num-cs = <1>;
+			cs-gpios = <&gpio18 5 0>;
+			status = "disabled";
+		};
+
+		pcie@f4000000 {
+			compatible = "hisilicon,kirin960-pcie";
+			reg = <0x0 0xf4000000 0x0 0x1000>,
+			      <0x0 0xff3fe000 0x0 0x1000>,
+			      <0x0 0xf3f20000 0x0 0x40000>,
+			      <0x0 0xf5000000 0x0 0x2000>;
+			reg-names = "dbi", "apb", "phy", "config";
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0x00000000
+				  0x0 0xf6000000
+				  0x0 0x02000000>;
+			num-lanes = <1>;
+			#interrupt-cells = <1>;
+			interrupts = <0 283 4>;
+			interrupt-names = "msi";
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 1
+					 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0 0 0 2
+					 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0 0 0 3
+					 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0 0 0 4
+					 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+				 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+				 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+				 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+				 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+			clock-names = "pcie_phy_ref", "pcie_aux",
+				      "pcie_apb_phy", "pcie_apb_sys",
+				      "pcie_aclk";
+			reset-gpios = <&gpio11 1 0 >;
+		};
+
+		/* UFS */
+		ufs: ufs@ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>,
+					<0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
+		/* SD */
+		dwmmc1: dwmmc1@ff37f000 {
+			compatible = "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff37f000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
+				<&crg_ctrl HI3660_HCLK_GATE_SD>;
+			clock-names = "ciu", "biu";
+			clock-frequency = <3200000>;
+			resets = <&crg_rst 0x94 18>;
+			reset-names = "reset";
+			hisilicon,peripheral-syscon = <&sctrl>;
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		/* SDIO */
+		dwmmc2: dwmmc2@ff3ff000 {
+			compatible = "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff3ff000 0x0 0x1000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
+				 <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
+			clock-names = "ciu", "biu";
+			resets = <&crg_rst 0x94 20>;
+			reset-names = "reset";
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@e8a06000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xe8a06000 0x0 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		watchdog1: watchdog@e8a07000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xe8a07000 0x0 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		tsensor: tsensor@fff30000 {
+			compatible = "hisilicon,hi3660-tsensor";
+			reg = <0x0 0xfff30000 0x0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+
+			cls0: cls0-thermal {
+				polling-delay = <1000>;
+				polling-delay-passive = <100>;
+				sustainable-power = <4500>;
+
+				/* sensor ID */
+				thermal-sensors = <&tsensor 1>;
+
+				trips {
+					threshold: trip-point0 {
+						temperature = <65000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+
+					target: trip-point1 {
+						temperature = <75000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&target>;
+						contribution = <1024>;
+						cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+					map1 {
+						trip = <&target>;
+						contribution = <512>;
+						cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usb-phy {
+				compatible = "hisilicon,hi3660-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,eye-diagram-param = <0x22466e4>;
+			};
+		};
+
+		dwc3: usb@ff100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xff100000 0x0 0x100000>;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "ref", "bus_early";
+
+			assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			assigned-clock-rates = <229000000>;
+
+			resets = <&crg_rst 0x90 8>,
+				 <&crg_rst 0x90 7>,
+				 <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 5>;
+
+			interrupts = <0 159 4>, <0 161 4>;
+			phys = <&usb_phy>;
+			phy-names = "usb3-phy";
+		};
+	};
+};
+
+#include "hi3660-coresight.dtsi"
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
new file mode 100644
index 0000000000..7c32f5fd5c
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey970 Development Board
+ *
+ * Copyright (C) 2016, HiSilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+
+#include "hi3670.dtsi"
+#include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
+
+/ {
+	model = "HiKey970";
+	compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
+	aliases {
+		mshc1 = &dwmmc1;
+		mshc2 = &dwmmc2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;       /* console UART */
+	};
+
+	chosen {
+		stdout-path = "serial6:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* expect bootloader to fill in this region */
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/* GPIO_051_WIFI_EN */
+		gpio = <&gpio6 3 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from "hikey970-schematics.pdf" from HiSilicon.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	/* GPIO_000-GPIO_007 */
+	gpio-line-names =
+		"",
+		"TP901", /* TEST_MODE connected to TP901 */
+		"",
+		"GPIO_003_USB_HUB_RESET_N",
+		"NC",
+		"[AP_GPS_REF_CLK]",
+		"[I2C3_SCL]",
+		"[I2C3_SDA]";
+};
+
+&gpio1 {
+	/* GPIO_008-GPIO_015 */
+	gpio-line-names =
+		"[UART0_CTS]", /* LSEC pin 3: GPIO_008_UART2_CTS_N */
+		"[UART0_RTS]", /* LSEC pin 9: GPIO_009_UART2_RTS_N */
+		"[UART0_TXD]", /* LSEC pin 5: GPIO_010_UART2_TXD */
+		"[UART0_RXD]", /* LSEC pin 7: GPIO_011_UART2_RXD */
+		"[USER_LED5]",
+		"GPIO-I", /* LSEC pin 31: GPIO_013_CAM0_RST_N */
+		"[USER_LED3]",
+		"[USER_LED4]";
+};
+
+&gpio2 {
+	/* GPIO_016-GPIO_023 */
+	gpio-line-names =
+		"GPIO-G", /* LSEC pin 29: GPIO_016_LCD_TE0 */
+		"[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
+		"[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
+		"GPIO_019_BT_ACTIVE",
+		"[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
+		"[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
+		"[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
+		"[I2C3_SDA]"; /* HSEC pin 38: ISP_SDA1 */
+};
+
+&gpio3 {
+	/* GPIO_024-GPIO_031 */
+	gpio-line-names =
+		"GPIO_024_WIFI_ACTIVE",
+		"GPIO_025_PERST_M.2",
+		"[I2C4_SCL]",
+		"[I2C4_SDA]",
+		"NC",
+		"GPIO-H", /* LSEC pin 30: GPIO_029_LCD_RST_N */
+		"[USER_LED1]",
+		"GPIO-L"; /* LSEC pin 34: GPIO_031 */
+};
+
+&gpio4 {
+	/* GPIO_032-GPIO_039 */
+	gpio-line-names =
+		"GPIO-K", /* LSEC pin 33: GPIO_032_CAM1_RST_N */
+		"GPIO_033_PMU1_EN",
+		"GPIO_034_USBSW_SEL",
+		/*
+		 * These two pins should be used for SD(IO) data according
+		 * to the 96boards specification but seems to be repurposed
+		 * for UART 0. They are however named according to the spec.
+		 */
+		"[SD_DAT1]", /* HSEC pin 3: GPIO_035_UART0_RXD */
+		"[SD_DAT2]", /* HSEC pin 5: GPIO_036_UART0_TXD */
+		"[UART1_RXD]", /* LSEC pin 13: DEBUG_UART6_RXD */
+		"[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
+		"[SOC_GPS_UART3_CTS_N]"; /* TP2304 */
+};
+
+&gpio5 {
+	/* GPIO_040-GPIO_047 */
+	gpio-line-names =
+		"[SOC_GPS_UART3_RTS_N]", /* TP2302 */
+		"[SOC_GPS_UART3_RXD]", /* TP2303 */
+		"[SOC_GPS_UART3_TXD]", /* TP2305 */
+		"[SOC_BT_UART4_CTS_N]",
+		"[SOC_BT_UART4_RTS_N]",
+		"[SOC_BT_UART4_RXD]",
+		"[SOC_BT_UART4_TXD]",
+		"NC";
+};
+
+&gpio6 {
+	/* GPIO_048-GPIO_055 */
+	gpio-line-names =
+		"NC",
+		"GPIO_049_USER_LED6",
+		"GPIO_050_CAN_RST",
+		"GPIO_051_WIFI_EN",
+		"GPIO-D", /* LSEC pin 26 */
+		"GPIO-J", /* LSEC pin 32 */
+		"GPIO_054_BT_EN",
+		"[GPIO_055_SEL]";
+};
+
+&gpio7 {
+	/* GPIO_056-GPIO_063 */
+	gpio-line-names =
+		"[PCIE_PERST_L]", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio8 {
+	/* GPIO_064-GPIO_071 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio9 {
+	/* GPIO_072-GPIO_079 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio10 {
+	/* GPIO_080-GPIO_087 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio11 {
+	/* GPIO_088-GPIO_095 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio12 {
+	/* GPIO_096-GPIO_103 */
+	gpio-line-names = "NC", "", "", "", "", "", "", "";
+};
+
+&gpio13 {
+	/* GPIO_104-GPIO_111 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio14 {
+	/* GPIO_112-GPIO_119 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio15 {
+	/* GPIO_120-GPIO_127 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio16 {
+	/* GPIO_128-GPIO_135 */
+	gpio-line-names =
+		"[WL_SDIO_CLK]",
+		"[WL_SDIO_CMD]",
+		"[WL_SDIO_DATA0]",
+		"[WL_SDIO_DATA1]",
+		"[WL_SDIO_DATA2]",
+		"[WL_SDIO_DATA3]",
+		"[ETH_ISOLATE]",
+		"NC";
+};
+
+&gpio17 {
+	/* GPIO_136-GPIO_143 */
+	gpio-line-names =
+		"[MINI1CLK_EN]", "NC", "", "", "", "", "", "";
+};
+
+&gpio18 {
+	/* GPIO_144-GPIO_151 */
+	gpio-line-names =
+		"[SPI1_SCLK]", /* HSEC pin 9: GPIO_144_SPI3_CLK */
+		"[SPI1_DIN]", /* HSEC pin 11: GPIO_145_SPI3_DI */
+		"[SPI1_DOUT]", /* HSEC pin 1: GPIO_146_SPI3_DO */
+		"[SPI1_CS]", /* HSEC pin 7: GPIO_147_SPI3_CS0_N */
+		"[POWER_INT_N]",
+		"[CDMA_GPS_SYNC]",
+		"GPIO_150_PEX_INTA",
+		"GPIO_151_CAN_INT";
+};
+
+&gpio19 {
+	/* GPIO_152-GPIO_159 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio20 {
+	/* GPIO_160-GPIO_167 */
+	gpio-line-names =
+		"[SD_CLK]",
+		"[SD_CMD]",
+		"[SD_DATA0]",
+		"[SD_DATA1]",
+		"[SD_DATA2]",
+		"[SD_DATA3]",
+		"GPIO_166_ETHCLK_EN",
+		"GPIO_167_USER_LED2";
+};
+
+&gpio21 {
+	/* GPIO_168-GPIO_175 */
+	gpio-line-names =
+		"GPIO_168_GPS_EN",
+		"GPIO-C", /* LSEC pin 25: GPIO_169_USIM1_CLK */
+		"GPIO-E", /* LSEC pin 27: GPIO_170_USIM1_RST */
+		"GPIO-B", /* LSEC pin 24: GPIO_171_USIM1_DATA */
+		"", "", "", "", "";
+};
+
+&gpio22 {
+	/* GPIO_176-GPIO_183 */
+	gpio-line-names =
+		"[PMU_PWR_HOLD]",
+		"GPIO_177_WL_WAKEUP_AP",
+		"[JTAG_TCK]",
+		"[JTAG_TMS]",
+		"[JTAG_TDI]",
+		"[JTAG_TMS]",
+		"GPIO_182_FATAL_ERR",
+		"NC";
+};
+
+&gpio23 {
+	/* GPIO_184-GPIO_191 */
+	gpio-line-names =
+		"GPIO_184_JTAG_SEL",
+		"GPIO-F", /* LSEC pin 28: GPIO_185_LCD_BL_PWM */
+		"[I2C0_SCL]", /* LSEC pin 15: GPIO_186_I2C0_SCL */
+		"[I2C0_SDA]", /* LSEC pin 17: GPIO_187_I2C0_SDA */
+		"[GPIO_188_I2C1_SCL]", /* Actual SoC I2C1_SCL */
+		"[GPIO_189_I2C1_SDA]", /* Actual SoC I2C1_SDA */
+		"[I2C1_SCL]", /* LSEC pin 19: GPIO_190_I2C2_SCL */
+		"[I2C2_SDA]"; /* LSEC pin 21: GPIO_191_I2C2_SDA */
+};
+
+&gpio24 {
+	/* GPIO_192-GPIO_199 */
+	gpio-line-names =
+		"[SD_LED]",
+		"NC",
+		"[PCM_DI]", /* LSEC pin 22: GPIO_194_I2S0_DI */
+		"[PCM_DO]", /* LSEC pin 20: GPIO_195_I2S0_DO */
+		"[PCM_CLK]", /* LSEC pin 18: GPIO_196_I2S0_XCLK */
+		"[PCM_FS]", /* LSEC pin 16: GPIO_197_I2S0_XFS */
+		"",
+		"[I2S2_DO]";
+};
+
+&gpio25 {
+	/* GPIO_200-GPIO_207 */
+	gpio-line-names =
+		"[I2S2_XCLK]",
+		"[I2S2_XFS]",
+		"GPIO_202_PERST_ETH",
+		"GPIO_203_PWRON_DET",
+		"GPIO_204_PMU1_IRQ_N",
+		"GPIO_205_SD_DET",
+		"GPIO_206_GPS_MOTION_INT",
+		"GPIO_207_HDMI_SEL";
+};
+
+&gpio26 {
+	/* GPIO_208-GPIO_215 */
+	gpio-line-names =
+		"GPIO-A", /* LSEC pin 23: GPIO_208_WAKEUP_SOC */
+		"GPIO_209_VBUS_TYPEC",
+		"NC",
+		"NC",
+		"NC",
+		"[SPI0_SCLK]", /* LSEC pin 8: GPIO_213_SPI2_CLK */
+		"[SPI0_DIN]", /* LSEC pin 10: GPIO_214_SPI2_DI */
+		"[SPI0_DOUT]"; /* LSEC pin 14: GPIO_215_SPI2_DO */
+};
+
+&gpio27 {
+	/* GPIO_216-GPIO_223 */
+	gpio-line-names =
+		"[SPI0_CS]", /* LSEC pin 12: GPIO_216_SPI2_CS0_N */
+		"GPIO_217_HDMI_PD",
+		"GPIO_218_GPS_WAKEUP_AP",
+		"GPIO_219_M.2CLK_EN",
+		"GPIO_220_PERST_MINI",
+		"GPIO_221_CC_INT",
+		"[PCIE_CLKREQ_L]",
+		"NC";
+};
+
+&gpio28 {
+	/* GPIO_224-GPIO_231 */
+	gpio-line-names =
+		"[PMU0_INT]",
+		"[SPMI_DATA]",
+		"[SPMI_CLK]",
+		"[CAN_SPI_CLK]",
+		"[CAN_SPI_DI]",
+		"[CAN_SPI_DO]",
+		"[CAN_SPI_CS]",
+		"GPIO_231_HDMI_INT";
+};
+
+&dwmmc1 {
+	bus-width = <0x4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cap-sd-highspeed;
+	disable-wp;
+	cd-inverted;
+	cd-gpios = <&gpio25 5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pmx_func
+		     &sd_clk_cfg_func
+		     &sd_cfg_func>;
+	vmmc-supply = <&ldo16>;
+	vqmmc-supply = <&ldo9>;
+	status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+	bus-width = <0x4>;
+	non-removable;
+	broken-cd;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pmx_func
+		     &sdio_clk_cfg_func
+		     &sdio_cfg_func>;
+	/* WL_EN */
+	vmmc-supply = <&wlan_en>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;      /* sdio func num */
+		/* WL_IRQ, GPIO_177_WL_WAKEUP_AP */
+		interrupt-parent = <&gpio22>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart0 {
+	/* On High speed expansion header */
+	label = "HS-UART0";
+	status = "okay";
+};
+
+&uart2 {
+	/* On Low speed expansion header */
+	label = "LS-UART0";
+	status = "okay";
+};
+
+&uart6 {
+	/* On Low speed expansion header */
+	label = "LS-UART1";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
new file mode 100644
index 0000000000..886b93c589
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -0,0 +1,789 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi3670 SoC
+ *
+ * Copyright (C) 2016, HiSilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi3670-clock.h>
+
+/ {
+	compatible = "hisilicon,hi3670";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	gic: interrupt-controller@e82b0000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+		      <0x0 0xe82b2000 0 0x2000>, /* GICC */
+		      <0x0 0xe82b4000 0 0x2000>, /* GICH */
+		      <0x0 0xe82b6000 0 0x2000>; /* GICV */
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <1920000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		crg_ctrl: crg_ctrl@fff35000 {
+			compatible = "hisilicon,hi3670-crgctrl", "syscon";
+			reg = <0x0 0xfff35000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		crg_rst: crg_rst_controller {
+			compatible = "hisilicon,hi3670-reset",
+				     "hisilicon,hi3660-reset";
+			#reset-cells = <2>;
+			hisi,rst-syscon = <&crg_ctrl>;
+		};
+
+		pctrl: pctrl@e8a09000 {
+			compatible = "hisilicon,hi3670-pctrl", "syscon";
+			reg = <0x0 0xe8a09000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pmuctrl: crg_ctrl@fff34000 {
+			compatible = "hisilicon,hi3670-pmuctrl", "syscon";
+			reg = <0x0 0xfff34000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sctrl: sctrl@fff0a000 {
+			compatible = "hisilicon,hi3670-sctrl", "syscon";
+			reg = <0x0 0xfff0a000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		iomcu: iomcu@ffd7e000 {
+			compatible = "hisilicon,hi3670-iomcu", "syscon";
+			reg = <0x0 0xffd7e000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		media1_crg: media1_crgctrl@e87ff000 {
+			compatible = "hisilicon,hi3670-media1-crg", "syscon";
+			reg = <0x0 0xe87ff000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		media2_crg: media2_crgctrl@e8900000 {
+			compatible = "hisilicon,hi3670-media2-crg","syscon";
+			reg = <0x0 0xe8900000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		iomcu_rst: reset {
+			compatible = "hisilicon,hi3660-reset";
+			hisi,rst-syscon = <&iomcu>;
+			#reset-cells = <2>;
+		};
+
+		uart0: serial@fdf02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf02000 0x0 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			status = "disabled";
+		};
+
+		uart1: serial@fdf00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART1>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@fdf03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf03000 0x0 0x1000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART2>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			status = "disabled";
+		};
+
+		uart3: serial@ffd74000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xffd74000 0x0 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART3>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			status = "disabled";
+		};
+
+		uart4: serial@fdf01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf01000 0x0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART4>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			status = "disabled";
+		};
+
+		uart5: serial@fdf05000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf05000 0x0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART5>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart6: serial@fff32000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfff32000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_UART6>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e8a0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 0 1 &pmx0 3 1 5>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@e8a0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e8a0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 6 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e8a0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0e000 0x0 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e8a0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0f000 0x0 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 18 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@e8a10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a10000 0x0 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 26 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@e8a11000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a11000 0x0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 34 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@e8a12000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a12000 0x0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 41 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@e8a13000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a13000 0x0 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 49 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@e8a14000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a14000 0x0 0x1000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 57 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@e8a15000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a15000 0x0 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 65 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@e8a16000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a16000 0x0 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 73 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@e8a17000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a17000 0x0 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 81 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@e8a18000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a18000 0x0 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@e8a19000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a19000 0x0 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@e8a1a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1a000 0x0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@e8a1b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx5 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@e8a1c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx5 0 8 2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@fff28000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff28000 0x0 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 4 42 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_GPIO18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@fff29000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff29000 0x0 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 0 61 2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_GPIO19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@e8a1f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1f000 0x0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx7 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@e8a20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a20000 0x0 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx7 0 8 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO21>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio22: gpio@fff0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO176 */
+			gpio-ranges = <&pmx1 2 0 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio23: gpio@fff0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO184 */
+			gpio-ranges = <&pmx1 0 6 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio24: gpio@fff0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO192 */
+			gpio-ranges = <&pmx1 0 14 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio25: gpio@fff0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0e000 0x0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO200 */
+			gpio-ranges = <&pmx1 0 22 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio26: gpio@fff0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0f000 0x0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO208 */
+			gpio-ranges = <&pmx1 0 30 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio27: gpio@fff10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff10000 0x0 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO216 */
+			gpio-ranges = <&pmx1 4 31 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio28: gpio@fff1d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff1d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 1 35 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		/* UFS */
+		ufs: ufs@ff3c0000 {
+			compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3c0000 0x0 0x1000>,
+				<0x0 0xff3e0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
+				 <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>,
+					<0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
+		/* SD */
+		dwmmc1: dwmmc1@ff37f000 {
+			compatible = "hisilicon,hi3670-dw-mshc",
+				     "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff37f000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_SD>,
+				<&crg_ctrl HI3670_HCLK_GATE_SD>;
+			clock-names = "ciu", "biu";
+			clock-frequency = <3200000>;
+			resets = <&crg_rst 0x94 18>;
+			reset-names = "reset";
+			hisilicon,peripheral-syscon = <&sctrl>;
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		/* SDIO */
+		dwmmc2: dwmmc2@fc183000 {
+			compatible = "hisilicon,hi3670-dw-mshc",
+				     "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xfc183000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_SDIO>,
+				<&crg_ctrl HI3670_HCLK_GATE_SDIO>;
+			clock-names = "ciu", "biu";
+			clock-frequency = <3200000>;
+			resets = <&crg_rst 0x94 20>;
+			reset-names = "reset";
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		/* I2C */
+		i2c0: i2c@ffd71000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd71000 0x0 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&iomcu HI3670_CLK_GATE_I2C0>;
+			resets = <&iomcu_rst 0x20 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffd72000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd72000 0x0 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&iomcu HI3670_CLK_GATE_I2C1>;
+			resets = <&iomcu_rst 0x20 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffd73000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd73000 0x0 0x1000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&iomcu HI3670_CLK_GATE_I2C2>;
+			resets = <&iomcu_rst 0x20 5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@fdf0c000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_I2C3>;
+			resets = <&crg_rst 0x78 7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@fdf0d000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_I2C4>;
+			resets = <&crg_rst 0x78 27>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
new file mode 100644
index 0000000000..7d370dac4c
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS File for HiSilicon Poplar Development Board
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hi3798cv200.dtsi"
+#include "poplar-pinctrl.dtsi"
+
+/ {
+	model = "HiSilicon Poplar Development Board";
+	compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
+
+	aliases {
+		serial0 = &uart0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user-led0 {
+			label = "green:user1";
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		user-led1 {
+			label = "green:user2";
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		user-led2 {
+			label = "green:user3";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		user-led3 {
+			label = "green:user4";
+			gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			panic-indicator;
+			default-state = "off";
+		};
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_PCIE0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 7 0>;
+		enable-active-high;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
+		     &emmc_pins_3 &emmc_pins_4>;
+	fifo-depth = <256>;
+	clock-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&eth_phy1>;
+	phy-mode = "rgmii";
+	hisilicon,phy-reset-delays-us = <10000 10000 30000>;
+
+	eth_phy1: phy@3 {
+		reg = <3>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+	gpio-line-names = "GPIO-E",	"",
+			  "",		"",
+			  "",		"GPIO-F",
+			  "",		"GPIO-J";
+};
+
+&gpio2 {
+	status = "okay";
+	gpio-line-names = "GPIO-H",	"GPIO-I",
+			  "GPIO-L",	"GPIO-G",
+			  "GPIO-K",	"",
+			  "",		"";
+};
+
+&gpio3 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "GPIO-C",	"",
+			  "",		"GPIO-B";
+};
+
+&gpio4 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"GPIO-D",
+			  "",		"";
+};
+
+&gpio5 {
+	status = "okay";
+	gpio-line-names = "",		"USER-LED-1",
+			  "USER-LED-2",	"",
+			  "",		"GPIO-A",
+			  "",		"";
+};
+
+&gpio6 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"USER-LED-0",
+			  "",		"",
+			  "",		"";
+};
+
+&gpio10 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"",
+			  "USER-LED-3",	"";
+};
+
+&i2c0 {
+	status = "okay";
+	label = "LS-I2C0";
+};
+
+&i2c2 {
+	status = "okay";
+	label = "LS-I2C1";
+};
+
+&ir {
+	linux,rc-map-name = "rc-hisi-poplar";
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&sd0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	label = "LS-SPI0";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	label = "LS-UART0";
+};
+/* No optional LS-UART1 on Low Speed Expansion Connector. */
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
new file mode 100644
index 0000000000..ed1b5a7a60
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS File for HiSilicon Hi3798cv200 SoC.
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/clock/histb-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+	compatible = "hisilicon,hi3798cv200";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
+		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc@f0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xf0000000 0x10000000>;
+
+		crg: clock-reset-controller@8a22000 {
+			compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
+			reg = <0x8a22000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+
+			gmacphyrst: reset-controller {
+				compatible = "ti,syscon-reset";
+				#reset-cells = <1>;
+				ti,reset-bits = <
+					0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
+					0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
+				>;
+			};
+		};
+
+		sysctrl: system-controller@8000000 {
+			compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
+			reg = <0x8000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+		};
+
+		perictrl: peripheral-controller@8a20000 {
+			compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
+				     "simple-mfd";
+			reg = <0x8a20000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8a20000 0x1000>;
+
+			usb2_phy1: usb2_phy@120 {
+				compatible = "hisilicon,hi3798cv200-usb2-phy";
+				reg = <0x120 0x4>;
+				clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+				resets = <&crg 0xbc 4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb2_phy1_port0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 8>;
+				};
+
+				usb2_phy1_port1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 9>;
+				};
+			};
+
+			usb2_phy2: usb2_phy@124 {
+				compatible = "hisilicon,hi3798cv200-usb2-phy";
+				reg = <0x124 0x4>;
+				clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
+				resets = <&crg 0xbc 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb2_phy2_port0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 10>;
+				};
+			};
+
+			combphy0: phy@850 {
+				compatible = "hisilicon,hi3798cv200-combphy";
+				reg = <0x850 0x8>;
+				#phy-cells = <1>;
+				clocks = <&crg HISTB_COMBPHY0_CLK>;
+				resets = <&crg 0x188 4>;
+				assigned-clocks = <&crg HISTB_COMBPHY0_CLK>;
+				assigned-clock-rates = <100000000>;
+				hisilicon,fixed-mode = <PHY_TYPE_USB3>;
+			};
+
+			combphy1: phy@858 {
+				compatible = "hisilicon,hi3798cv200-combphy";
+				reg = <0x858 0x8>;
+				#phy-cells = <1>;
+				clocks = <&crg HISTB_COMBPHY1_CLK>;
+				resets = <&crg 0x188 12>;
+				assigned-clocks = <&crg HISTB_COMBPHY1_CLK>;
+				assigned-clock-rates = <100000000>;
+				hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
+			};
+		};
+
+		pmx0: pinconf@8a21000 {
+			compatible = "pinconf-single";
+			reg = <0x8a21000 0x180>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			pinctrl-single,gpio-range = <
+				&range 0  8 2  /* GPIO 0 */
+				&range 8  1 0  /* GPIO 1 */
+				&range 9  4 2
+				&range 13 1 0
+				&range 14 1 1
+				&range 15 1 0
+				&range 16 5 0  /* GPIO 2 */
+				&range 21 3 1
+				&range 24 4 1  /* GPIO 3 */
+				&range 28 2 2
+				&range 86 1 1
+				&range 87 1 0
+				&range 30 4 2  /* GPIO 4 */
+				&range 34 3 0
+				&range 37 1 2
+				&range 38 3 2  /* GPIO 6 */
+				&range 41 5 0
+				&range 46 8 1  /* GPIO 7 */
+				&range 54 8 1  /* GPIO 8 */
+				&range 64 7 1  /* GPIO 9 */
+				&range 71 1 0
+				&range 72 6 1  /* GPIO 10 */
+				&range 78 1 0
+				&range 79 1 1
+				&range 80 6 1  /* GPIO 11 */
+				&range 70 2 1
+				&range 88 8 0  /* GPIO 12 */
+			>;
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
+		uart0: serial@8b00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x8b00000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl HISTB_UART0_CLK>, <&sysctrl HISTB_UART0_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@8b02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x8b02000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_UART2_CLK>, <&crg HISTB_UART2_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		i2c0: i2c@8b10000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b10000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C0_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@8b11000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b11000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C1_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@8b12000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b12000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C2_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@8b13000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b13000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C3_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@8b14000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b14000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C4_CLK>;
+			status = "disabled";
+		};
+
+		spi0: spi@8b1a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8b1a000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			cs-gpios = <&gpio7 1 0>;
+			clocks = <&crg HISTB_SPI0_CLK>, <&crg HISTB_SPI0_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sd0: mmc@9820000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x9820000 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_SDIO0_BIU_CLK>,
+				 <&crg HISTB_SDIO0_CIU_CLK>;
+			clock-names = "biu", "ciu";
+			resets = <&crg 0x9c 4>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		emmc: mmc@9830000 {
+			compatible = "hisilicon,hi3798cv200-dw-mshc";
+			reg = <0x9830000 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_MMC_CIU_CLK>,
+				 <&crg HISTB_MMC_BIU_CLK>,
+				 <&crg HISTB_MMC_SAMPLE_CLK>,
+				 <&crg HISTB_MMC_DRV_CLK>;
+			clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+			resets = <&crg 0xa0 4>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		gpio0: gpio@8b20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b20000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 0 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio1: gpio@8b21000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b21000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 8 1
+				&pmx0 1 9 4
+				&pmx0 5 13 1
+				&pmx0 6 14 1
+				&pmx0 7 15 1
+			>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio2: gpio@8b22000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b22000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio3: gpio@8b23000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b23000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 24 4
+				&pmx0 4 28 2
+				&pmx0 6 86 1
+				&pmx0 7 87 1
+			>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio4: gpio@8b24000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b24000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio5: gpio@8004000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8004000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio6: gpio@8b26000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b26000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio7: gpio@8b27000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b27000 0x1000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 46 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio8: gpio@8b28000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b28000 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 54 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio9: gpio@8b29000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b29000 0x1000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio10: gpio@8b2a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2a000 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio11: gpio@8b2b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2b000 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio12: gpio@8b2c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2c000 0x1000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 88 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@9840000 {
+			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+			reg = <0x9840000 0x1000>,
+			      <0x984300c 0x4>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_ETH0_MAC_CLK>,
+				 <&crg HISTB_ETH0_MACIF_CLK>;
+			clock-names = "mac_core", "mac_ifc";
+			resets = <&crg 0xcc 8>,
+				 <&crg 0xcc 10>,
+				 <&gmacphyrst 0>;
+			reset-names = "mac_core", "mac_ifc", "phy";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@9841000 {
+			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+			reg = <0x9841000 0x1000>,
+			      <0x9843010 0x4>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_ETH1_MAC_CLK>,
+				 <&crg HISTB_ETH1_MACIF_CLK>;
+			clock-names = "mac_core", "mac_ifc";
+			resets = <&crg 0xcc 9>,
+				 <&crg 0xcc 11>,
+				 <&gmacphyrst 1>;
+			reset-names = "mac_core", "mac_ifc", "phy";
+			status = "disabled";
+		};
+
+		ir: ir@8001000 {
+			compatible = "hisilicon,hix5hd2-ir";
+			reg = <0x8001000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl HISTB_IR_CLK>;
+			status = "disabled";
+		};
+
+		pcie: pcie@9860000 {
+			compatible = "hisilicon,hi3798cv200-pcie";
+			reg = <0x9860000 0x1000>,
+			      <0x0 0x2000>,
+			      <0x2000000 0x01000000>;
+			reg-names = "control", "rc-dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000>,
+				 <0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_PCIE_AUX_CLK>,
+				 <&crg HISTB_PCIE_PIPE_CLK>,
+				 <&crg HISTB_PCIE_SYS_CLK>,
+				 <&crg HISTB_PCIE_BUS_CLK>;
+			clock-names = "aux", "pipe", "sys", "bus";
+			resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+			reset-names = "soft", "sys", "bus";
+			phys = <&combphy1 PHY_TYPE_PCIE>;
+			phy-names = "phy";
+			status = "disabled";
+		};
+
+		ohci: usb@9880000 {
+			compatible = "generic-ohci";
+			reg = <0x9880000 0x10000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_USB2_BUS_CLK>,
+				 <&crg HISTB_USB2_12M_CLK>,
+				 <&crg HISTB_USB2_48M_CLK>;
+			clock-names = "bus", "clk12", "clk48";
+			resets = <&crg 0xb8 12>;
+			reset-names = "bus";
+			phys = <&usb2_phy1_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci: usb@9890000 {
+			compatible = "generic-ehci";
+			reg = <0x9890000 0x10000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_USB2_BUS_CLK>,
+				 <&crg HISTB_USB2_PHY_CLK>,
+				 <&crg HISTB_USB2_UTMI_CLK>;
+			clock-names = "bus", "phy", "utmi";
+			resets = <&crg 0xb8 12>,
+				 <&crg 0xb8 16>,
+				 <&crg 0xb8 13>;
+			reset-names = "bus", "phy", "utmi";
+			phys = <&usb2_phy1_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
new file mode 100644
index 0000000000..3f387f4cf5
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * dtsi file for Hisilicon Hi6220 coresight
+ *
+ * Copyright (C) 2017 HiSilicon Ltd.
+ *
+ * Author: Pengcheng Li <lipengcheng8@huawei.com>
+ *         Leo Yan <leo.yan@linaro.org>
+ */
+
+/ {
+	soc {
+		funnel@f6401000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xf6401000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					soc_funnel_out: endpoint {
+						remote-endpoint =
+							<&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					soc_funnel_in: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@f6402000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xf6402000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint =
+							<&soc_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint =
+							<&replicator_in>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-static-replicator";
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint =
+							<&etf_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint =
+							<&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint =
+							<&tpiu_in>;
+					};
+				};
+			};
+		};
+
+		etr@f6404000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xf6404000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+							<&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		tpiu@f6405000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0 0xf6405000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint =
+							<&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@f6501000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xf6501000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					acpu_funnel_out: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					acpu_funnel_in0: endpoint {
+						remote-endpoint =
+							<&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					acpu_funnel_in1: endpoint {
+						remote-endpoint =
+							<&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					acpu_funnel_in2: endpoint {
+						remote-endpoint =
+							<&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					acpu_funnel_in3: endpoint {
+						remote-endpoint =
+							<&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					acpu_funnel_in4: endpoint {
+						remote-endpoint =
+							<&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					acpu_funnel_in5: endpoint {
+						remote-endpoint =
+							<&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					acpu_funnel_in6: endpoint {
+						remote-endpoint =
+							<&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					acpu_funnel_in7: endpoint {
+						remote-endpoint =
+							<&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etm0: etm@f659c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659c000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@f659d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659d000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@f659e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659e000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@f659f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659f000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm4: etm@f65dc000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65dc000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu4>;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm5: etm@f65dd000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65dd000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu5>;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm6: etm@f65de000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65de000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu6>;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm7: etm@f65df000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65df000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu7>;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		/* System CTIs */
+		/* CTI 0 - TMC and TPIU connections */
+		cti@f6403000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf6403000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+		};
+
+		/* CTI - CPU-0 */
+		cti@f6598000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf6598000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu0>;
+			arm,cs-dev-assoc = <&etm0>;
+		};
+
+		/* CTI - CPU-1 */
+		cti@f6599000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf6599000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu1>;
+			arm,cs-dev-assoc = <&etm1>;
+		};
+
+		/* CTI - CPU-2 */
+		cti@f659a000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf659a000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu2>;
+			arm,cs-dev-assoc = <&etm2>;
+		};
+
+		/* CTI - CPU-3 */
+		cti@f659b000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf659b000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu3>;
+			arm,cs-dev-assoc = <&etm3>;
+		};
+
+		/* CTI - CPU-4 */
+		cti@f65d8000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf65d8000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu4>;
+			arm,cs-dev-assoc = <&etm4>;
+		};
+
+		/* CTI - CPU-5 */
+		cti@f65d9000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf65d9000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu5>;
+			arm,cs-dev-assoc = <&etm5>;
+		};
+
+		/* CTI - CPU-6 */
+		cti@f65da000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf65da000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu6>;
+			arm,cs-dev-assoc = <&etm6>;
+		};
+
+		/* CTI - CPU-7 */
+		cti@f65db000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf65db000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu7>;
+			arm,cs-dev-assoc = <&etm7>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
new file mode 100644
index 0000000000..f0672ec65b
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey Development Board
+ *
+ * Copyright (C) 2015, HiSilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "hi6220.dtsi"
+#include "hikey-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "HiKey Development Board";
+	compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+
+	aliases {
+		serial0 = &uart0; /* On board UART0 */
+		serial1 = &uart1; /* BT UART */
+		serial2 = &uart2; /* LS Expansion UART0 */
+		serial3 = &uart3; /* LS Expansion UART1 */
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	/*
+	 * Reserve below regions from memory node:
+	 *
+	 *  0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+	 *  0x05f0,1000 - 0x05f0,1fff: Reboot reason
+	 *  0x06df,f000 - 0x06df,ffff: Mailbox message data
+	 *  0x0740,f000 - 0x0740,ffff: MCU firmware section
+	 *  0x21f0,0000 - 0x21ff,ffff: pstore/ramoops buffer
+	 *  0x3e00,0000 - 0x3fff,ffff: OP-TEE
+	 */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
+		      <0x00000000 0x05f00000 0x00000000 0x00001000>,
+		      <0x00000000 0x05f02000 0x00000000 0x00efd000>,
+		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
+		      <0x00000000 0x07410000 0x00000000 0x1aaf0000>,
+		      <0x00000000 0x22000000 0x00000000 0x1c000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@21f00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x21f00000 0x0 0x00100000>;
+			record-size = <0x00020000>;
+			console-size = <0x00020000>;
+			ftrace-size = <0x00020000>;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00000000 0x08000000>;
+			linux,cma-default;
+		};
+	};
+
+	reboot-mode-syscon@5f01000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x05f01000 0x0 0x00001000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x0>;
+
+			mode-normal = <0x77665501>;
+			mode-bootloader = <0x77665500>;
+			mode-recovery = <0x77665502>;
+		};
+	};
+
+	reg_sys_5v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vdd_3v3: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&reg_sys_5v>;
+	};
+
+	reg_5v_hub: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio0 7 0>;
+		regulator-always-on;
+		vin-supply = <&reg_sys_5v>;
+	};
+
+	wl1835_pwrseq: wl1835-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/* WLAN_EN GPIO */
+		reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		clocks = <&pmic>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <10>;
+		power-off-delay-us = <10>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user-1 {
+			label = "green:user1";
+			gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user-2 {
+			label = "green:user2";
+			gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */
+			linux,default-trigger = "mmc0";
+		};
+
+		led-user-3 {
+			label = "green:user3";
+			gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */
+			linux,default-trigger = "mmc1";
+		};
+
+		led-user-4 {
+			label = "green:user4";
+			gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-bt {
+			label = "blue:bt";
+			gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		#clock-cells = <0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			ldo2: LDO2 {
+				regulator-name = "LDO2_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "LDO7_SDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo10: LDO10 {
+				regulator-name = "LDO10_2V85";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo13: LDO13 {
+				regulator-name = "LDO13_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo14: LDO14 {
+				regulator-name = "LDO14_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo15: LDO15 {
+				regulator-name = "LDO15_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo17: LDO17 {
+				regulator-name = "LDO17_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo19: LDO19 {
+				regulator-name = "LDO19_3V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo21: LDO21 {
+				regulator-name = "LDO21_1V8";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo22: LDO22 {
+				regulator-name = "LDO22_1V2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	sound_card {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_port0>;
+	};
+};
+
+&uart1 {
+	assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
+	assigned-clock-rates = <150000000>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmic>;
+		clock-names = "ext_clock";
+	};
+};
+
+&uart2 {
+	status = "okay";
+	label = "LS-UART0";
+};
+
+&uart3 {
+	status = "okay";
+	label = "LS-UART1";
+};
+
+&ade {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		/* 1 for output port */
+		port@1 {
+			reg = <1>;
+
+			dsi_out0: endpoint@0 {
+				remote-endpoint = <&adv7533_in>;
+			};
+		};
+	};
+};
+
+&dwmmc_0 {
+	cap-mmc-highspeed;
+	non-removable;
+	bus-width = <0x8>;
+	vmmc-supply = <&ldo19>;
+};
+
+&dwmmc_1 {
+	card-detect-delay = <200>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	vqmmc-supply = <&ldo7>;
+	vmmc-supply = <&ldo10>;
+	bus-width = <0x4>;
+	disable-wp;
+	cd-gpios = <&gpio1 0 1>;
+};
+
+&dwmmc_2 {
+	bus-width = <0x4>;
+	non-removable;
+	cap-power-off-card;
+	vmmc-supply = <&reg_vdd_3v3>;
+	mmc-pwrseq = <&wl1835_pwrseq>;
+
+	#address-cells = <0x1>;
+	#size-cells = <0x0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;	/* sdio func num */
+		/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (not routed from the SoC)
+ *         "[PER]" = pin is muxed for peripheral (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Pin assignments taken from LeMaker and CircuitCo Schematics
+ * Rev A1.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	gpio-line-names = "PWR_HOLD", "DSI_SEL",
+	"USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON",
+	"PWRON_DET", "5V_HUB_EN";
+};
+
+&gpio1 {
+	gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N",
+	"WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPIO-A", /* LSEC Pin 23: GPIO2_0 */
+		"GPIO-B", /* LSEC Pin 24: GPIO2_1 */
+		"GPIO-C", /* LSEC Pin 25: GPIO2_2 */
+		"GPIO-D", /* LSEC Pin 26: GPIO2_3 */
+		"GPIO-E", /* LSEC Pin 27: GPIO2_4 */
+		"USB_ID_DET", "USB_VBUS_DET",
+		"GPIO-H"; /* LSEC Pin 30: GPIO2_7 */
+};
+
+&gpio3 {
+	gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "",
+	"WLAN_ACTIVE", "NC", "NC";
+};
+
+&gpio4 {
+	gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3",
+	"USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE";
+};
+
+&gpio5 {
+	gpio-line-names = "NC", "NC",
+	"[UART1_RxD]", /* LSEC Pin 11: UART3_RX */
+	"[UART1_TxD]", /* LSEC Pin 13: UART3_TX */
+	"[AUX_SSI1]", "NC",
+	"[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */
+	"[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */
+};
+
+&gpio6 {
+	gpio-line-names =
+	"[SPI0_DIN]", /* Pin 10: SPI0_DI */
+	"[SPI0_DOUT]", /* Pin 14: SPI0_DO */
+	"[SPI0_CS]", /* Pin 12: SPI0_CS_N */
+	"[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */
+	"NC", "NC", "NC",
+	"GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */
+};
+
+&gpio7 {
+	gpio-line-names = "NC", "NC", "NC", "NC",
+	"[PCM_DI]", /* Pin 22: MODEM_PCM_DI */
+	"[PCM_DO]", /* Pin 20: MODEM_PCM_DO */
+	"NC", "NC";
+};
+
+&gpio8 {
+	gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC",
+	"", "", "", "", "", "";
+};
+
+&gpio9 {
+	gpio-line-names = "",
+	"GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */
+	"GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */
+	"NC", "NC", "NC", "NC", "[ISP_CCLK0]";
+};
+
+&gpio10 {
+	gpio-line-names = "BOOT_SEL",
+	"[ISP_CCLK1]",
+	"GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */
+	"GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */
+	"NC", "NC",
+	"[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */
+	"[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */
+};
+
+&gpio11 {
+	gpio-line-names =
+	"[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */
+	"[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */
+	"", "NC", "NC", "NC", "", "";
+};
+
+&gpio12 {
+	gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]",
+	"[BT_PCM_DO]",
+	"NC", "NC", "NC", "NC",
+	"GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */
+};
+
+&gpio13 {
+	gpio-line-names = "[UART0_RX]", "[UART0_TX]",
+	"[BT_UART1_CTS]", "[BT_UART1_RTS]",
+	"[BT_UART1_RX]", "[BT_UART1_TX]",
+	"[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */
+	"[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */
+};
+
+&gpio14 {
+	gpio-line-names =
+	"[UART0_RxD]", /* LSEC Pin 7: UART2_RX */
+	"[UART0_TxD]", /* LSEC Pin 5: UART2_TX */
+	"[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */
+	"[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */
+	"[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */
+	"[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */
+	"[I2C2_SCL]", "[I2C2_SDA]";
+};
+
+&gpio15 {
+	gpio-line-names = "", "", "", "", "", "", "NC", "";
+};
+
+/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
+
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	adv7533: adv7533@39 {
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 2>;
+		pd-gpios = <&gpio0 4 0>;
+		adi,dsi-lanes = <4>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi_out0>;
+				};
+			};
+			port@2 {
+				reg = <2>;
+				codec_endpoint: endpoint {
+					remote-endpoint = <&i2s0_cpu_endpoint>;
+				};
+			};
+		};
+	};
+};
+
+&i2s0 {
+
+	ports {
+		i2s0_port0: port@0 {
+			i2s0_cpu_endpoint: endpoint {
+				remote-endpoint = <&codec_endpoint>;
+				dai-format = "i2s";
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
new file mode 100644
index 0000000000..be808bb254
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -0,0 +1,1070 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi6220 SoC
+ *
+ * Copyright (C) 2015, HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/hisi,hi6220-resets.h>
+#include <dt-bindings/clock/hi6220-clock.h>
+#include <dt-bindings/pinctrl/hisi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "hisilicon,hi6220";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <700>;
+				exit-latency-us = <250>;
+				min-residency-us = <1000>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		CLUSTER0_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		CLUSTER1_L2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <208000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <432000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <500000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <729000000>;
+			opp-microvolt = <1090000>;
+			clock-latency-ns = <500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1180000>;
+			clock-latency-ns = <500000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1330000>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	gic: interrupt-controller@f6801000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
+		      <0x0 0xf6802000 0 0x2000>, /* GICC */
+		      <0x0 0xf6804000 0 0x2000>, /* GICH */
+		      <0x0 0xf6806000 0 0x2000>; /* GICV */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sram: sram@fff80000 {
+			compatible = "hisilicon,hi6220-sramctrl", "syscon";
+			reg = <0x0 0xfff80000 0x0 0x12000>;
+		};
+
+		ao_ctrl: ao_ctrl@f7800000 {
+			compatible = "hisilicon,hi6220-aoctrl", "syscon";
+			reg = <0x0 0xf7800000 0x0 0x2000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		sys_ctrl: sys_ctrl@f7030000 {
+			compatible = "hisilicon,hi6220-sysctrl", "syscon";
+			reg = <0x0 0xf7030000 0x0 0x2000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		media_ctrl: media_ctrl@f4410000 {
+			compatible = "hisilicon,hi6220-mediactrl", "syscon";
+			reg = <0x0 0xf4410000 0x0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pm_ctrl: pm_ctrl@f7032000 {
+			compatible = "hisilicon,hi6220-pmctrl", "syscon";
+			reg = <0x0 0xf7032000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		acpu_sctrl: acpu_sctrl@f6504000 {
+			compatible = "hisilicon,hi6220-acpu-sctrl", "syscon";
+			reg = <0x0 0xf6504000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		medianoc_ade: medianoc_ade@f4520000 {
+			compatible = "syscon";
+			reg = <0x0 0xf4520000 0x0 0x4000>;
+		};
+
+		stub_clock: stub_clock {
+			compatible = "hisilicon,hi6220-stub-clk";
+			hisilicon,hi6220-clk-sram = <&sram>;
+			#clock-cells = <1>;
+			mbox-names = "mbox-tx";
+			mboxes = <&mailbox 1 0 11>;
+		};
+
+		uart0: serial@f8015000 {	/* console */
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf8015000 0x0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ao_ctrl HI6220_UART0_PCLK>,
+				 <&ao_ctrl HI6220_UART0_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@f7111000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7111000 0x0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART1_PCLK>,
+				 <&sys_ctrl HI6220_UART1_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>;
+			dmas = <&dma0 8 &dma0 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@f7112000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7112000 0x0 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART2_PCLK>,
+				 <&sys_ctrl HI6220_UART2_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			status = "disabled";
+		};
+
+		uart3: serial@f7113000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7113000 0x0 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART3_PCLK>,
+				 <&sys_ctrl HI6220_UART3_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			status = "disabled";
+		};
+
+		uart4: serial@f7114000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7114000 0x0 0x1000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART4_PCLK>,
+				 <&sys_ctrl HI6220_UART4_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			status = "disabled";
+		};
+
+		dma0: dma@f7370000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0x0 0xf7370000 0x0 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+			dma-requests = <32>;
+			interrupts = <0 84 4>;
+			clocks = <&sys_ctrl HI6220_EDMAC_ACLK>;
+			dma-no-cci;
+			dma-type = "hi6220_dma";
+			status = "okay";
+		};
+
+		dual_timer0: timer@f8008000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xf8008000 0x0 0x1000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ao_ctrl HI6220_TIMER0_PCLK>,
+				 <&ao_ctrl HI6220_TIMER0_PCLK>,
+				 <&ao_ctrl HI6220_TIMER0_PCLK>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		rtc0: rtc@f8003000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0xf8003000 0x0 0x1000>;
+			interrupts = <0 12 4>;
+			clocks = <&ao_ctrl HI6220_RTC0_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc1: rtc@f8004000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0xf8004000 0x0 0x1000>;
+			interrupts = <0 8 4>;
+			clocks = <&ao_ctrl HI6220_RTC1_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
+		pmx0: pinmux@f7010000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xf7010000  0x0 0x27c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <3>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			pinctrl-single,gpio-range = <
+				&range  80  8 MUX_M0 /* gpio  3: [0..7] */
+				&range  88  8 MUX_M0 /* gpio  4: [0..7] */
+				&range  96  8 MUX_M0 /* gpio  5: [0..7] */
+				&range 104  8 MUX_M0 /* gpio  6: [0..7] */
+				&range 112  8 MUX_M0 /* gpio  7: [0..7] */
+				&range 120  2 MUX_M0 /* gpio  8: [0..1] */
+				&range   2  6 MUX_M1 /* gpio  8: [2..7] */
+				&range   8  8 MUX_M1 /* gpio  9: [0..7] */
+				&range   0  1 MUX_M1 /* gpio 10: [0]    */
+				&range  16  7 MUX_M1 /* gpio 10: [1..7] */
+				&range  23  3 MUX_M1 /* gpio 11: [0..2] */
+				&range  28  5 MUX_M1 /* gpio 11: [3..7] */
+				&range  33  3 MUX_M1 /* gpio 12: [0..2] */
+				&range  43  5 MUX_M1 /* gpio 12: [3..7] */
+				&range  48  8 MUX_M1 /* gpio 13: [0..7] */
+				&range  56  8 MUX_M1 /* gpio 14: [0..7] */
+				&range  74  6 MUX_M1 /* gpio 15: [0..5] */
+				&range 122  1 MUX_M1 /* gpio 15: [6]    */
+				&range 126  1 MUX_M1 /* gpio 15: [7]    */
+				&range 127  8 MUX_M1 /* gpio 16: [0..7] */
+				&range 135  8 MUX_M1 /* gpio 17: [0..7] */
+				&range 143  8 MUX_M1 /* gpio 18: [0..7] */
+				&range 151  8 MUX_M1 /* gpio 19: [0..7] */
+			>;
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
+		pmx1: pinmux@f7010800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xf7010800 0x0 0x28c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+		};
+
+		pmx2: pinmux@f8001800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xf8001800 0x0 0x78>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+		};
+
+		gpio0: gpio@f8011000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf8011000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@f8012000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf8012000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@f8013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf8013000 0x0 0x1000>;
+			interrupts = <0 54 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@f8014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf8014000 0x0 0x1000>;
+			interrupts = <0 55 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 80 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@f7020000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7020000 0x0 0x1000>;
+			interrupts = <0 56 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 88 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@f7021000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7021000 0x0 0x1000>;
+			interrupts = <0 57 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 96 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@f7022000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7022000 0x0 0x1000>;
+			interrupts = <0 58 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 104 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@f7023000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7023000 0x0 0x1000>;
+			interrupts = <0 59 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 112 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@f7024000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7024000 0x0 0x1000>;
+			interrupts = <0 60 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 120 2 &pmx0 2 2 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@f7025000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7025000 0x0 0x1000>;
+			interrupts = <0 61 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 8 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@f7026000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7026000 0x0 0x1000>;
+			interrupts = <0 62 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 0 1 &pmx0 1 16 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@f7027000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7027000 0x0 0x1000>;
+			interrupts = <0 63 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 23 3 &pmx0 3 28 5>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@f7028000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7028000 0x0 0x1000>;
+			interrupts = <0 64 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 33 3 &pmx0 3 43 5>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@f7029000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7029000 0x0 0x1000>;
+			interrupts = <0 65 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 48 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@f702a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702a000 0x0 0x1000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 56 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@f702b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702b000 0x0 0x1000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 74 6
+				&pmx0 6 122 1
+				&pmx0 7 126 1
+			>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@f702c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702c000 0x0 0x1000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 127 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@f702d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702d000 0x0 0x1000>;
+			interrupts = <0 69 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 135 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@f702e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702e000 0x0 0x1000>;
+			interrupts = <0 70 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 143 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@f702f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702f000 0x0 0x1000>;
+			interrupts = <0 71 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 151 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		spi0: spi@f7106000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xf7106000 0x0 0x1000>;
+			interrupts = <0 50 4>;
+			bus-id = <0>;
+			enable-dma = <0>;
+			clocks = <&sys_ctrl HI6220_SPI_CLK>, <&sys_ctrl HI6220_SPI_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>;
+			num-cs = <1>;
+			cs-gpios = <&gpio6 2 0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@f7100000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xf7100000 0x0 0x1000>;
+			interrupts = <0 44 4>;
+			clocks = <&sys_ctrl HI6220_I2C0_CLK>;
+			i2c-sda-hold-time-ns = <300>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@f7101000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xf7101000 0x0 0x1000>;
+			clocks = <&sys_ctrl HI6220_I2C1_CLK>;
+			interrupts = <0 45 4>;
+			i2c-sda-hold-time-ns = <300>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@f7102000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xf7102000 0x0 0x1000>;
+			clocks = <&sys_ctrl HI6220_I2C2_CLK>;
+			interrupts = <0 46 4>;
+			i2c-sda-hold-time-ns = <300>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+			status = "disabled";
+		};
+
+		usb_phy: usbphy {
+			compatible = "hisilicon,hi6220-usb-phy";
+			#phy-cells = <0>;
+			phy-supply = <&reg_5v_hub>;
+			hisilicon,peripheral-syscon = <&sys_ctrl>;
+		};
+
+		usb: usb@f72c0000 {
+			compatible = "hisilicon,hi6220-usb";
+			reg = <0x0 0xf72c0000 0x0 0x40000>;
+			phys = <&usb_phy>;
+			phy-names = "usb2-phy";
+			clocks = <&sys_ctrl HI6220_USBOTG_HCLK>;
+			clock-names = "otg";
+			dr_mode = "otg";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <128>;
+			g-tx-fifo-size = <128 128 128 128 128 128 128 128
+					   16  16  16  16  16  16  16>;
+			interrupts = <0 77 0x4>;
+		};
+
+		mailbox: mailbox@f7510000 {
+			compatible = "hisilicon,hi6220-mbox";
+			reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
+			      <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <3>;
+		};
+
+		dwmmc_0: dwmmc0@f723d000 {
+			compatible = "hisilicon,hi6220-dw-mshc";
+			reg = <0x0 0xf723d000 0x0 0x1000>;
+			interrupts = <0x0 0x48 0x4>;
+			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
+			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
+			reset-names = "reset";
+			pinctrl-names = "default";
+			pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func
+				     &emmc_cfg_func &emmc_rst_cfg_func>;
+		};
+
+		dwmmc_1: dwmmc1@f723e000 {
+			compatible = "hisilicon,hi6220-dw-mshc";
+			hisilicon,peripheral-syscon = <&ao_ctrl>;
+			reg = <0x0 0xf723e000 0x0 0x1000>;
+			interrupts = <0x0 0x49 0x4>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
+			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
+			reset-names = "reset";
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
+			pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
+		};
+
+		dwmmc_2: dwmmc2@f723f000 {
+			compatible = "hisilicon,hi6220-dw-mshc";
+			reg = <0x0 0xf723f000 0x0 0x1000>;
+			interrupts = <0x0 0x4a 0x4>;
+			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
+			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
+			reset-names = "reset";
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>;
+			pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>;
+		};
+
+		watchdog0: watchdog@f8005000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xf8005000 0x0 0x1000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ao_ctrl HI6220_WDT0_PCLK>,
+				 <&ao_ctrl HI6220_WDT0_PCLK>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		tsensor: tsensor@0,f7030700 {
+			compatible = "hisilicon,tsensor";
+			reg = <0x0 0xf7030700 0x0 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl 22>;
+			clock-names = "thermal_clk";
+			#thermal-sensor-cells = <1>;
+		};
+
+		i2s0: i2s@f7118000 {
+			compatible = "hisilicon,hi6210-i2s";
+			reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */
+			clocks = <&sys_ctrl HI6220_DACODEC_PCLK>,
+				 <&sys_ctrl HI6220_BBPPLL0_DIV>;
+			clock-names = "dacodec", "i2s-base";
+			dmas = <&dma0 15 &dma0 14>;
+			dma-names = "rx", "tx";
+			hisilicon,sysctrl-syscon = <&sys_ctrl>;
+			#sound-dai-cells = <1>;
+		};
+
+		thermal-zones {
+
+			cls0: cls0-thermal {
+				polling-delay = <1000>;
+				polling-delay-passive = <100>;
+				sustainable-power = <3326>;
+
+				/* sensor ID */
+				thermal-sensors = <&tsensor 2>;
+
+				trips {
+					threshold: trip-point0 {
+						temperature = <65000>;
+						hysteresis = <0>;
+						type = "passive";
+					};
+
+					target: trip-point1 {
+						temperature = <75000>;
+						hysteresis = <0>;
+						type = "passive";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&target>;
+						cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
+		ade: ade@f4100000 {
+			compatible = "hisilicon,hi6220-ade";
+			reg = <0x0 0xf4100000 0x0 0x7800>;
+			reg-names = "ade_base";
+			hisilicon,noc-syscon = <&medianoc_ade>;
+			resets = <&media_ctrl MEDIA_ADE>;
+			interrupts = <0 115 4>; /* ldi interrupt */
+
+			clocks = <&media_ctrl HI6220_ADE_CORE>,
+				 <&media_ctrl HI6220_CODEC_JPEG>,
+				 <&media_ctrl HI6220_ADE_PIX_SRC>;
+			/*clock name*/
+			clock-names  = "clk_ade_core",
+				       "clk_codec_jpeg",
+				       "clk_ade_pix";
+
+			assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+				<&media_ctrl HI6220_CODEC_JPEG>;
+			assigned-clock-rates = <360000000>, <288000000>;
+			dma-coherent;
+			status = "disabled";
+
+			port {
+				ade_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+				};
+			};
+		};
+
+		dsi: dsi@f4107800 {
+			compatible = "hisilicon,hi6220-dsi";
+			reg = <0x0 0xf4107800 0x0 0x100>;
+			clocks = <&media_ctrl  HI6220_DSI_PCLK>;
+			clock-names = "pclk";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 0 for input port */
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&ade_out>;
+					};
+				};
+			};
+		};
+
+		debug@f6590000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf6590000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu0>;
+		};
+
+		debug@f6592000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf6592000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu1>;
+		};
+
+		debug@f6594000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf6594000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu2>;
+		};
+
+		debug@f6596000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf6596000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu3>;
+		};
+
+		debug@f65d0000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf65d0000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu4>;
+		};
+
+		debug@f65d2000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf65d2000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu5>;
+		};
+
+		debug@f65d4000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf65d4000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu6>;
+		};
+
+		debug@f65d6000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf65d6000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu7>;
+		};
+
+		mali: gpu@f4080000 {
+			compatible = "hisilicon,hi6220-mali", "arm,mali-450";
+			reg = <0x0 0xf4080000 0x0 0x00040000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pp2",
+					  "ppmmu2",
+					  "pp3",
+					  "ppmmu3";
+			clocks = <&media_ctrl HI6220_G3D_CLK>,
+				 <&media_ctrl HI6220_G3D_PCLK>;
+			clock-names = "bus", "core";
+			assigned-clocks = <&media_ctrl HI6220_G3D_CLK>,
+					  <&media_ctrl HI6220_G3D_PCLK>;
+			assigned-clock-rates = <500000000>, <144000000>;
+			reset-names = "ao_g3d", "media_g3d";
+			resets = <&ao_ctrl AO_G3D>, <&media_ctrl MEDIA_G3D>;
+		};
+	};
+};
+
+#include "hi6220-coresight.dtsi"
diff --git a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi
new file mode 100644
index 0000000000..3e27624c31
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * pinctrl dts fils for Hislicon HiKey development board
+ *
+ */
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+	soc {
+		pmx0: pinmux@f7010000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <
+				&boot_sel_pmx_func
+				&hkadc_ssi_pmx_func
+				&codec_clk_pmx_func
+				&pwm_in_pmx_func
+				&bl_pwm_pmx_func
+				>;
+
+			boot_sel_pmx_func: boot-sel-pins {
+				pinctrl-single,pins = <
+					0x0    MUX_M0	/* BOOT_SEL     (IOMG000) */
+				>;
+			};
+
+			emmc_pmx_func: emmc-pins {
+				pinctrl-single,pins = <
+					0x100  MUX_M0	/* EMMC_CLK     (IOMG064) */
+					0x104  MUX_M0	/* EMMC_CMD     (IOMG065) */
+					0x108  MUX_M0	/* EMMC_DATA0   (IOMG066) */
+					0x10c  MUX_M0	/* EMMC_DATA1   (IOMG067) */
+					0x110  MUX_M0	/* EMMC_DATA2   (IOMG068) */
+					0x114  MUX_M0	/* EMMC_DATA3   (IOMG069) */
+					0x118  MUX_M0	/* EMMC_DATA4   (IOMG070) */
+					0x11c  MUX_M0	/* EMMC_DATA5   (IOMG071) */
+					0x120  MUX_M0	/* EMMC_DATA6   (IOMG072) */
+					0x124  MUX_M0	/* EMMC_DATA7   (IOMG073) */
+				>;
+			};
+
+			sd_pmx_func: sd-pins {
+				pinctrl-single,pins = <
+					0xc    MUX_M0	/* SD_CLK       (IOMG003) */
+					0x10   MUX_M0	/* SD_CMD       (IOMG004) */
+					0x14   MUX_M0	/* SD_DATA0     (IOMG005) */
+					0x18   MUX_M0	/* SD_DATA1     (IOMG006) */
+					0x1c   MUX_M0	/* SD_DATA2     (IOMG007) */
+					0x20   MUX_M0	/* SD_DATA3     (IOMG008) */
+				>;
+			};
+			sd_pmx_idle: sd-idle-pins {
+				pinctrl-single,pins = <
+					0xc    MUX_M1	/* SD_CLK       (IOMG003) */
+					0x10   MUX_M1	/* SD_CMD       (IOMG004) */
+					0x14   MUX_M1	/* SD_DATA0     (IOMG005) */
+					0x18   MUX_M1	/* SD_DATA1     (IOMG006) */
+					0x1c   MUX_M1	/* SD_DATA2     (IOMG007) */
+					0x20   MUX_M1	/* SD_DATA3     (IOMG008) */
+				>;
+			};
+
+			sdio_pmx_func: sdio-pins {
+				pinctrl-single,pins = <
+					0x128  MUX_M0	/* SDIO_CLK     (IOMG074) */
+					0x12c  MUX_M0	/* SDIO_CMD     (IOMG075) */
+					0x130  MUX_M0	/* SDIO_DATA0   (IOMG076) */
+					0x134  MUX_M0	/* SDIO_DATA1   (IOMG077) */
+					0x138  MUX_M0	/* SDIO_DATA2   (IOMG078) */
+					0x13c  MUX_M0	/* SDIO_DATA3   (IOMG079) */
+				>;
+			};
+			sdio_pmx_idle: sdio-idle-pins {
+				pinctrl-single,pins = <
+					0x128  MUX_M1	/* SDIO_CLK     (IOMG074) */
+					0x12c  MUX_M1	/* SDIO_CMD     (IOMG075) */
+					0x130  MUX_M1	/* SDIO_DATA0   (IOMG076) */
+					0x134  MUX_M1	/* SDIO_DATA1   (IOMG077) */
+					0x138  MUX_M1	/* SDIO_DATA2   (IOMG078) */
+					0x13c  MUX_M1	/* SDIO_DATA3   (IOMG079) */
+				>;
+			};
+
+			isp_pmx_func: isp-pins {
+				pinctrl-single,pins = <
+					0x24   MUX_M0	/* ISP_PWDN0    (IOMG009) */
+					0x28   MUX_M0	/* ISP_PWDN1    (IOMG010) */
+					0x2c   MUX_M0	/* ISP_PWDN2    (IOMG011) */
+					0x30   MUX_M1	/* ISP_SHUTTER0 (IOMG012) */
+					0x34   MUX_M1	/* ISP_SHUTTER1 (IOMG013) */
+					0x38   MUX_M1	/* ISP_PWM      (IOMG014) */
+					0x3c   MUX_M0	/* ISP_CCLK0    (IOMG015) */
+					0x40   MUX_M0	/* ISP_CCLK1    (IOMG016) */
+					0x44   MUX_M0	/* ISP_RESETB0  (IOMG017) */
+					0x48   MUX_M0	/* ISP_RESETB1  (IOMG018) */
+					0x4c   MUX_M1	/* ISP_STROBE0  (IOMG019) */
+					0x50   MUX_M1	/* ISP_STROBE1  (IOMG020) */
+					0x54   MUX_M0	/* ISP_SDA0     (IOMG021) */
+					0x58   MUX_M0	/* ISP_SCL0     (IOMG022) */
+					0x5c   MUX_M0	/* ISP_SDA1     (IOMG023) */
+					0x60   MUX_M0	/* ISP_SCL1     (IOMG024) */
+				>;
+			};
+
+			hkadc_ssi_pmx_func: hkadc-ssi-pins {
+				pinctrl-single,pins = <
+					0x68   MUX_M0	/* HKADC_SSI    (IOMG026) */
+				>;
+			};
+
+			codec_clk_pmx_func: codec-clk-pins {
+				pinctrl-single,pins = <
+					0x6c   MUX_M0	/* CODEC_CLK    (IOMG027) */
+				>;
+			};
+
+			codec_pmx_func: codec-pins {
+				pinctrl-single,pins = <
+					0x70   MUX_M1	/* DMIC_CLK     (IOMG028) */
+					0x74   MUX_M0	/* CODEC_SYNC   (IOMG029) */
+					0x78   MUX_M0	/* CODEC_DI     (IOMG030) */
+					0x7c   MUX_M0	/* CODEC_DO     (IOMG031) */
+				>;
+			};
+
+			fm_pmx_func: fm-pins {
+				pinctrl-single,pins = <
+					0x80   MUX_M1	/* FM_XCLK      (IOMG032) */
+					0x84   MUX_M1	/* FM_XFS       (IOMG033) */
+					0x88   MUX_M1	/* FM_DI        (IOMG034) */
+					0x8c   MUX_M1	/* FM_DO        (IOMG035) */
+				>;
+			};
+
+			bt_pmx_func: bt-pins {
+				pinctrl-single,pins = <
+					0x90   MUX_M0	/* BT_XCLK      (IOMG036) */
+					0x94   MUX_M0	/* BT_XFS       (IOMG037) */
+					0x98   MUX_M0	/* BT_DI        (IOMG038) */
+					0x9c   MUX_M0	/* BT_DO        (IOMG039) */
+				>;
+			};
+
+			pwm_in_pmx_func: pwm-in-pins {
+				pinctrl-single,pins = <
+					0xb8   MUX_M1	/* PWM_IN       (IOMG046) */
+				>;
+			};
+
+			bl_pwm_pmx_func: bl-pwm-pins {
+				pinctrl-single,pins = <
+					0xbc   MUX_M1	/* BL_PWM       (IOMG047) */
+				>;
+			};
+
+			uart0_pmx_func: uart0-pins {
+				pinctrl-single,pins = <
+					0xc0   MUX_M0	/* UART0_RXD    (IOMG048) */
+					0xc4   MUX_M0	/* UART0_TXD    (IOMG049) */
+				>;
+			};
+
+			uart1_pmx_func: uart1-pins {
+				pinctrl-single,pins = <
+					0xc8   MUX_M0	/* UART1_CTS_N  (IOMG050) */
+					0xcc   MUX_M0	/* UART1_RTS_N  (IOMG051) */
+					0xd0   MUX_M0	/* UART1_RXD    (IOMG052) */
+					0xd4   MUX_M0	/* UART1_TXD    (IOMG053) */
+				>;
+			};
+
+			uart2_pmx_func: uart2-pins {
+				pinctrl-single,pins = <
+					0xd8   MUX_M0	/* UART2_CTS_N  (IOMG054) */
+					0xdc   MUX_M0	/* UART2_RTS_N  (IOMG055) */
+					0xe0   MUX_M0	/* UART2_RXD    (IOMG056) */
+					0xe4   MUX_M0	/* UART2_TXD    (IOMG057) */
+				>;
+			};
+
+			uart3_pmx_func: uart3-pins {
+				pinctrl-single,pins = <
+					0x180  MUX_M1	/* UART3_CTS_N  (IOMG096) */
+					0x184  MUX_M1	/* UART3_RTS_N  (IOMG097) */
+					0x188  MUX_M1	/* UART3_RXD    (IOMG098) */
+					0x18c  MUX_M1	/* UART3_TXD    (IOMG099) */
+				>;
+			};
+
+			uart4_pmx_func: uart4-pins {
+				pinctrl-single,pins = <
+					0x1d0  MUX_M1	/* UART4_CTS_N  (IOMG116) */
+					0x1d4  MUX_M1	/* UART4_RTS_N  (IOMG117) */
+					0x1d8  MUX_M1	/* UART4_RXD    (IOMG118) */
+					0x1dc  MUX_M1	/* UART4_TXD    (IOMG119) */
+				>;
+			};
+
+			uart5_pmx_func: uart5-pins {
+				pinctrl-single,pins = <
+					0x1c8  MUX_M1	/* UART5_RXD    (IOMG114) */
+					0x1cc  MUX_M1	/* UART5_TXD    (IOMG115) */
+				>;
+			};
+
+			i2c0_pmx_func: i2c0-pins {
+				pinctrl-single,pins = <
+					0xe8   MUX_M0	/* I2C0_SCL     (IOMG058) */
+					0xec   MUX_M0	/* I2C0_SDA     (IOMG059) */
+				>;
+			};
+
+			i2c1_pmx_func: i2c1-pins {
+				pinctrl-single,pins = <
+					0xf0   MUX_M0	/* I2C1_SCL     (IOMG060) */
+					0xf4   MUX_M0	/* I2C1_SDA     (IOMG061) */
+				>;
+			};
+
+			i2c2_pmx_func: i2c2-pins {
+				pinctrl-single,pins = <
+					0xf8   MUX_M0	/* I2C2_SCL     (IOMG062) */
+					0xfc   MUX_M0	/* I2C2_SDA     (IOMG063) */
+				>;
+			};
+
+			spi0_pmx_func: spi0-pins {
+				pinctrl-single,pins = <
+					0x1a0  MUX_M1   /* SPI0_DI      (IOMG104) */
+					0x1a4  MUX_M1	/* SPI0_DO	(IOMG105) */
+					0x1a8  MUX_M1	/* SPI0_CS_N	(IOMG106) */
+					0x1ac  MUX_M1	/* SPI0_CLK	(IOMG107) */
+				>;
+			};
+		};
+
+		pmx1: pinmux@f7010800 {
+
+			pinctrl-names = "default";
+			pinctrl-0 = <
+				&boot_sel_cfg_func
+				&hkadc_ssi_cfg_func
+				&codec_clk_cfg_func
+				&pwm_in_cfg_func
+				&bl_pwm_cfg_func
+				>;
+
+			boot_sel_cfg_func: boot-sel-cfg-pins {
+				pinctrl-single,pins = <
+					0x0    0x0	/* BOOT_SEL     (IOCFG000) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			hkadc_ssi_cfg_func: hkadc-ssi-cfg-pins {
+				pinctrl-single,pins = <
+					0x6c   0x0	/* HKADC_SSI    (IOCFG027) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			emmc_clk_cfg_func: emmc-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x104  0x0	/* EMMC_CLK     (IOCFG065) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
+			};
+
+			emmc_cfg_func: emmc-cfg-pins {
+				pinctrl-single,pins = <
+					0x108  0x0	/* EMMC_CMD     (IOCFG066) */
+					0x10c  0x0	/* EMMC_DATA0   (IOCFG067) */
+					0x110  0x0	/* EMMC_DATA1   (IOCFG068) */
+					0x114  0x0	/* EMMC_DATA2   (IOCFG069) */
+					0x118  0x0	/* EMMC_DATA3   (IOCFG070) */
+					0x11c  0x0	/* EMMC_DATA4   (IOCFG071) */
+					0x120  0x0	/* EMMC_DATA5   (IOCFG072) */
+					0x124  0x0	/* EMMC_DATA6   (IOCFG073) */
+					0x128  0x0	/* EMMC_DATA7   (IOCFG074) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+
+			emmc_rst_cfg_func: emmc-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x12c  0x0	/* EMMC_RST_N   (IOCFG075) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+
+			sd_clk_cfg_func: sd-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0xc    0x0	/* SD_CLK       (IOCFG003) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_10MA DRIVE_MASK>;
+			};
+			sd_clk_cfg_idle: sd-clk-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0xc    0x0	/* SD_CLK       (IOCFG003) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			sd_cfg_func: sd-cfg-pins {
+				pinctrl-single,pins = <
+					0x10   0x0	/* SD_CMD       (IOCFG004) */
+					0x14   0x0	/* SD_DATA0     (IOCFG005) */
+					0x18   0x0	/* SD_DATA1     (IOCFG006) */
+					0x1c   0x0	/* SD_DATA2     (IOCFG007) */
+					0x20   0x0	/* SD_DATA3     (IOCFG008) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
+			};
+			sd_cfg_idle: sd-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x10   0x0	/* SD_CMD       (IOCFG004) */
+					0x14   0x0	/* SD_DATA0     (IOCFG005) */
+					0x18   0x0	/* SD_DATA1     (IOCFG006) */
+					0x1c   0x0	/* SD_DATA2     (IOCFG007) */
+					0x20   0x0	/* SD_DATA3     (IOCFG008) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			sdio_clk_cfg_func: sdio-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x134  0x0	/* SDIO_CLK     (IOCFG077) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
+			};
+			sdio_clk_cfg_idle: sdio-clk-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x134  0x0	/* SDIO_CLK     (IOCFG077) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			sdio_cfg_func: sdio-cfg-pins {
+				pinctrl-single,pins = <
+					0x138  0x0	/* SDIO_CMD     (IOCFG078) */
+					0x13c  0x0	/* SDIO_DATA0   (IOCFG079) */
+					0x140  0x0	/* SDIO_DATA1   (IOCFG080) */
+					0x144  0x0	/* SDIO_DATA2   (IOCFG081) */
+					0x148  0x0	/* SDIO_DATA3   (IOCFG082) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+			sdio_cfg_idle: sdio-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x138  0x0	/* SDIO_CMD     (IOCFG078) */
+					0x13c  0x0	/* SDIO_DATA0   (IOCFG079) */
+					0x140  0x0	/* SDIO_DATA1   (IOCFG080) */
+					0x144  0x0	/* SDIO_DATA2   (IOCFG081) */
+					0x148  0x0	/* SDIO_DATA3   (IOCFG082) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			isp_cfg_func1: isp-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0x28   0x0	/* ISP_PWDN0    (IOCFG010) */
+					0x2c   0x0	/* ISP_PWDN1    (IOCFG011) */
+					0x30   0x0	/* ISP_PWDN2    (IOCFG012) */
+					0x34   0x0	/* ISP_SHUTTER0 (IOCFG013) */
+					0x38   0x0	/* ISP_SHUTTER1 (IOCFG014) */
+					0x3c   0x0	/* ISP_PWM      (IOCFG015) */
+					0x40   0x0	/* ISP_CCLK0    (IOCFG016) */
+					0x44   0x0	/* ISP_CCLK1    (IOCFG017) */
+					0x48   0x0	/* ISP_RESETB0  (IOCFG018) */
+					0x4c   0x0	/* ISP_RESETB1  (IOCFG019) */
+					0x50   0x0	/* ISP_STROBE0  (IOCFG020) */
+					0x58   0x0	/* ISP_SDA0     (IOCFG022) */
+					0x5c   0x0	/* ISP_SCL0     (IOCFG023) */
+					0x60   0x0	/* ISP_SDA1     (IOCFG024) */
+					0x64   0x0	/* ISP_SCL1     (IOCFG025) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+			isp_cfg_idle1: isp-cfg-idle1-pins {
+				pinctrl-single,pins = <
+					0x34   0x0	/* ISP_SHUTTER0 (IOCFG013) */
+					0x38   0x0	/* ISP_SHUTTER1 (IOCFG014) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			isp_cfg_func2: isp-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0x54   0x0	/* ISP_STROBE1  (IOCFG021) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			codec_clk_cfg_func: codec-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x70   0x0	/* CODEC_CLK    (IOCFG028) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+			codec_clk_cfg_idle: codec-clk-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x70   0x0	/* CODEC_CLK    (IOCFG028) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			codec_cfg_func1: codec-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0x74   0x0	/* DMIC_CLK     (IOCFG029) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			codec_cfg_func2: codec-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0x78   0x0	/* CODEC_SYNC   (IOCFG030) */
+					0x7c   0x0	/* CODEC_DI     (IOCFG031) */
+					0x80   0x0	/* CODEC_DO     (IOCFG032) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+			codec_cfg_idle2: codec-cfg-idle2-pins {
+				pinctrl-single,pins = <
+					0x78   0x0	/* CODEC_SYNC   (IOCFG030) */
+					0x7c   0x0	/* CODEC_DI     (IOCFG031) */
+					0x80   0x0	/* CODEC_DO     (IOCFG032) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			fm_cfg_func: fm-cfg-pins {
+				pinctrl-single,pins = <
+					0x84   0x0	/* FM_XCLK      (IOCFG033) */
+					0x88   0x0	/* FM_XFS       (IOCFG034) */
+					0x8c   0x0	/* FM_DI        (IOCFG035) */
+					0x90   0x0	/* FM_DO        (IOCFG036) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			bt_cfg_func: bt-cfg-pins {
+				pinctrl-single,pins = <
+					0x94   0x0	/* BT_XCLK      (IOCFG037) */
+					0x98   0x0	/* BT_XFS       (IOCFG038) */
+					0x9c   0x0	/* BT_DI        (IOCFG039) */
+					0xa0   0x0	/* BT_DO        (IOCFG040) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+			bt_cfg_idle: bt-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x94   0x0	/* BT_XCLK      (IOCFG037) */
+					0x98   0x0	/* BT_XFS       (IOCFG038) */
+					0x9c   0x0	/* BT_DI        (IOCFG039) */
+					0xa0   0x0	/* BT_DO        (IOCFG040) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			pwm_in_cfg_func: pwm-in-cfg-pins {
+				pinctrl-single,pins = <
+					0xbc   0x0	/* PWM_IN       (IOCFG047) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			bl_pwm_cfg_func: bl-pwm-cfg-pins {
+				pinctrl-single,pins = <
+					0xc0   0x0	/* BL_PWM       (IOCFG048) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart0_cfg_func1: uart0-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0xc4   0x0	/* UART0_RXD    (IOCFG049) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart0_cfg_func2: uart0-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0xc8   0x0	/* UART0_TXD    (IOCFG050) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+
+			uart1_cfg_func1: uart1-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0xcc   0x0	/* UART1_CTS_N  (IOCFG051) */
+					0xd4   0x0	/* UART1_RXD    (IOCFG053) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart1_cfg_func2: uart1-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0xd0   0x0	/* UART1_RTS_N  (IOCFG052) */
+					0xd8   0x0	/* UART1_TXD    (IOCFG054) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart2_cfg_func: uart2-cfg-pins {
+				pinctrl-single,pins = <
+					0xdc   0x0	/* UART2_CTS_N  (IOCFG055) */
+					0xe0   0x0	/* UART2_RTS_N  (IOCFG056) */
+					0xe4   0x0	/* UART2_RXD    (IOCFG057) */
+					0xe8   0x0	/* UART2_TXD    (IOCFG058) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart3_cfg_func: uart3-cfg-pins {
+				pinctrl-single,pins = <
+					0x190  0x0	/* UART3_CTS_N  (IOCFG100) */
+					0x194  0x0	/* UART3_RTS_N  (IOCFG101) */
+					0x198  0x0	/* UART3_RXD    (IOCFG102) */
+					0x19c  0x0	/* UART3_TXD    (IOCFG103) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart4_cfg_func: uart4-cfg-pins {
+				pinctrl-single,pins = <
+					0x1e0  0x0	/* UART4_CTS_N  (IOCFG120) */
+					0x1e4  0x0	/* UART4_RTS_N  (IOCFG121) */
+					0x1e8  0x0	/* UART4_RXD    (IOCFG122) */
+					0x1ec  0x0	/* UART4_TXD    (IOCFG123) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart5_cfg_func: uart5-cfg-pins {
+				pinctrl-single,pins = <
+					0x1d8  0x0	/* UART4_RXD    (IOCFG118) */
+					0x1dc  0x0	/* UART4_TXD    (IOCFG119) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			i2c0_cfg_func: i2c0-cfg-pins {
+				pinctrl-single,pins = <
+					0xec   0x0	/* I2C0_SCL     (IOCFG059) */
+					0xf0   0x0	/* I2C0_SDA     (IOCFG060) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			i2c1_cfg_func: i2c1-cfg-pins {
+				pinctrl-single,pins = <
+					0xf4   0x0	/* I2C1_SCL     (IOCFG061) */
+					0xf8   0x0	/* I2C1_SDA     (IOCFG062) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			i2c2_cfg_func: i2c2-cfg-pins {
+				pinctrl-single,pins = <
+					0xfc   0x0	/* I2C2_SCL     (IOCFG063) */
+					0x100  0x0	/* I2C2_SDA     (IOCFG064) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			spi0_cfg_func: spi0-cfg-pins {
+				pinctrl-single,pins = <
+					0x1b0  0x0	/* SPI0_DI	(IOCFG108) */
+					0x1b4  0x0	/* SPI0_DO	(IOCFG109) */
+					0x1b8  0x0	/* SPI0_CS_N	(IOCFG110) */
+					0x1bc  0x0	/* SPI0_CLK	(IOCFG111) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+		};
+
+		pmx2: pinmux@f8001800 {
+
+			pinctrl-names = "default";
+			pinctrl-0 = <
+				&rstout_n_cfg_func
+				>;
+
+			rstout_n_cfg_func: rstout-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x0    0x0	/* RSTOUT_N     (IOCFG000) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			pmu_peri_en_cfg_func: pmu-peri-en-cfg-pins {
+				pinctrl-single,pins = <
+					0x4    0x0	/* PMU_PERI_EN  (IOCFG001) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			sysclk0_en_cfg_func: sysclk0-en-cfg-pins {
+				pinctrl-single,pins = <
+					0x8    0x0	/* SYSCLK0_EN   (IOCFG002) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			jtag_tdo_cfg_func: jtag-tdo-cfg-pins {
+				pinctrl-single,pins = <
+					0xc    0x0	/* JTAG_TDO     (IOCFG003) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
+			};
+
+			rf_reset_cfg_func: rf-reset-cfg-pins {
+				pinctrl-single,pins = <
+					0x70   0x0	/* RF_RESET0    (IOCFG028) */
+					0x74   0x0	/* RF_RESET1    (IOCFG029) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
new file mode 100644
index 0000000000..b801a48041
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
@@ -0,0 +1,1060 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * pinctrl dts fils for Hislicon HiKey960 development board
+ *
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+	soc {
+		/* [IOMG_000, IOMG_123] */
+		range: gpio-range {
+			#pinctrl-single,gpio-range-cells = <3>;
+		};
+
+		pmx0: pinmux@e896c000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xe896c000 0x0 0x1f0>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <
+				&range 0 7 0
+				&range 8 116 0>;
+
+			pmu_pmx_func: pmu-pins {
+				pinctrl-single,pins = <
+					0x008 MUX_M1 /* PMU1_SSI */
+					0x00c MUX_M1 /* PMU2_SSI */
+					0x010 MUX_M1 /* PMU_CLKOUT */
+					0x100 MUX_M1 /* PMU_HKADC_SSI */
+				>;
+			};
+
+			csi0_pwd_n_pmx_func: csi0-pwd-n-pins {
+				pinctrl-single,pins = <
+					0x044 MUX_M0 /* CSI0_PWD_N */
+				>;
+			};
+
+			csi1_pwd_n_pmx_func: csi1-pwd-n-pins {
+				pinctrl-single,pins = <
+					0x04c MUX_M0 /* CSI1_PWD_N */
+				>;
+			};
+
+			isp0_pmx_func: isp0-pins {
+				pinctrl-single,pins = <
+					0x058 MUX_M1 /* ISP_CLK0 */
+					0x064 MUX_M1 /* ISP_SCL0 */
+					0x068 MUX_M1 /* ISP_SDA0 */
+				>;
+			};
+
+			isp1_pmx_func: isp1-pins {
+				pinctrl-single,pins = <
+					0x05c MUX_M1 /* ISP_CLK1 */
+					0x06c MUX_M1 /* ISP_SCL1 */
+					0x070 MUX_M1 /* ISP_SDA1 */
+				>;
+			};
+
+			pwr_key_pmx_func: pwr-key-pins {
+				pinctrl-single,pins = <
+					0x080 MUX_M0 /* GPIO_034 */
+				>;
+			};
+
+			i2c3_pmx_func: i2c3-pins {
+				pinctrl-single,pins = <
+					0x02c MUX_M1 /* I2C3_SCL */
+					0x030 MUX_M1 /* I2C3_SDA */
+				>;
+			};
+
+			i2c4_pmx_func: i2c4-pins {
+				pinctrl-single,pins = <
+					0x090 MUX_M1 /* I2C4_SCL */
+					0x094 MUX_M1 /* I2C4_SDA */
+				>;
+			};
+
+			pcie_perstn_pmx_func: pcie-perstn-pins {
+				pinctrl-single,pins = <
+					0x15c MUX_M1 /* PCIE_PERST_N */
+				>;
+			};
+
+			usbhub5734_pmx_func: usbhub5734-pins {
+				pinctrl-single,pins = <
+					0x11c MUX_M0 /* GPIO_073 */
+					0x120 MUX_M0 /* GPIO_074 */
+				>;
+			};
+
+			uart0_pmx_func: uart0-pins {
+				pinctrl-single,pins = <
+					0x0cc MUX_M2 /* UART0_RXD */
+					0x0d0 MUX_M2 /* UART0_TXD */
+				>;
+			};
+
+			uart1_pmx_func: uart1-pins {
+				pinctrl-single,pins = <
+					0x0b0 MUX_M2 /* UART1_CTS_N */
+					0x0b4 MUX_M2 /* UART1_RTS_N */
+					0x0a8 MUX_M2 /* UART1_RXD */
+					0x0ac MUX_M2 /* UART1_TXD */
+				>;
+			};
+
+			uart2_pmx_func: uart2-pins {
+				pinctrl-single,pins = <
+					0x0bc MUX_M2 /* UART2_CTS_N */
+					0x0c0 MUX_M2 /* UART2_RTS_N */
+					0x0c8 MUX_M2 /* UART2_RXD */
+					0x0c4 MUX_M2 /* UART2_TXD */
+				>;
+			};
+
+			uart3_pmx_func: uart3-pins {
+				pinctrl-single,pins = <
+					0x0dc MUX_M1 /* UART3_CTS_N */
+					0x0e0 MUX_M1 /* UART3_RTS_N */
+					0x0e4 MUX_M1 /* UART3_RXD */
+					0x0e8 MUX_M1 /* UART3_TXD */
+				>;
+			};
+
+			uart4_pmx_func: uart4-pins {
+				pinctrl-single,pins = <
+					0x0ec MUX_M1 /* UART4_CTS_N */
+					0x0f0 MUX_M1 /* UART4_RTS_N */
+					0x0f4 MUX_M1 /* UART4_RXD */
+					0x0f8 MUX_M1 /* UART4_TXD */
+				>;
+			};
+
+			uart5_pmx_func: uart5-pins {
+				pinctrl-single,pins = <
+					0x0c4 MUX_M3 /* UART5_CTS_N */
+					0x0c8 MUX_M3 /* UART5_RTS_N */
+					0x0bc MUX_M3 /* UART5_RXD */
+					0x0c0 MUX_M3 /* UART5_TXD */
+				>;
+			};
+
+			uart6_pmx_func: uart6-pins {
+				pinctrl-single,pins = <
+					0x0cc MUX_M1 /* UART6_CTS_N */
+					0x0d0 MUX_M1 /* UART6_RTS_N */
+					0x0d4 MUX_M1 /* UART6_RXD */
+					0x0d8 MUX_M1 /* UART6_TXD */
+				>;
+			};
+
+			cam0_rst_pmx_func: cam0-rst-pins {
+				pinctrl-single,pins = <
+					0x0c8 MUX_M0 /* CAM0_RST */
+				>;
+			};
+
+			cam1_rst_pmx_func: cam1-rst-pins {
+				pinctrl-single,pins = <
+					0x124 MUX_M0 /* CAM1_RST */
+				>;
+			};
+		};
+
+		/* [IOMG_MMC0_000, IOMG_MMC0_005] */
+		pmx1: pinmux@ff37e000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff37e000 0x0 0x18>;
+			#gpio-range-cells = <0x3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 6 0>;
+
+			sd_pmx_func: sd-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SD_CLK */
+					0x004 MUX_M1 /* SD_CMD */
+					0x008 MUX_M1 /* SD_DATA0 */
+					0x00c MUX_M1 /* SD_DATA1 */
+					0x010 MUX_M1 /* SD_DATA2 */
+					0x014 MUX_M1 /* SD_DATA3 */
+				>;
+			};
+		};
+
+		/* [IOMG_FIX_000, IOMG_FIX_011] */
+		pmx2: pinmux@ff3b6000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff3b6000 0x0 0x30>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 12 0>;
+
+			ufs_pmx_func: ufs-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* UFS_REF_CLK */
+					0x004 MUX_M1 /* UFS_RST_N */
+				>;
+			};
+
+			spi3_pmx_func: spi3-pins {
+				pinctrl-single,pins = <
+					0x008 MUX_M1 /* SPI3_CLK */
+					0x00c MUX_M1 /* SPI3_DI */
+					0x010 MUX_M1 /* SPI3_DO */
+					0x014 MUX_M1 /* SPI3_CS0_N */
+				>;
+			};
+		};
+
+		/* [IOMG_MMC1_000, IOMG_MMC1_005] */
+		pmx3: pinmux@ff3fd000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff3fd000 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 6 0>;
+
+			sdio_pmx_func: sdio-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SDIO_CLK */
+					0x004 MUX_M1 /* SDIO_CMD */
+					0x008 MUX_M1 /* SDIO_DATA0 */
+					0x00c MUX_M1 /* SDIO_DATA1 */
+					0x010 MUX_M1 /* SDIO_DATA2 */
+					0x014 MUX_M1 /* SDIO_DATA3 */
+				>;
+			};
+		};
+
+		/* [IOMG_AO_000, IOMG_AO_041] */
+		pmx4: pinmux@fff11000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xfff11000 0x0 0xa8>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base in node, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 42 0>;
+
+			i2s2_pmx_func: i2s2-pins {
+				pinctrl-single,pins = <
+					0x044 MUX_M1 /* I2S2_DI */
+					0x048 MUX_M1 /* I2S2_DO */
+					0x04c MUX_M1 /* I2S2_XCLK */
+					0x050 MUX_M1 /* I2S2_XFS */
+				>;
+			};
+
+			slimbus_pmx_func: slimbus-pins {
+				pinctrl-single,pins = <
+					0x02c MUX_M1 /* SLIMBUS_CLK */
+					0x030 MUX_M1 /* SLIMBUS_DATA */
+				>;
+			};
+
+			i2c0_pmx_func: i2c0-pins {
+				pinctrl-single,pins = <
+					0x014 MUX_M1 /* I2C0_SCL */
+					0x018 MUX_M1 /* I2C0_SDA */
+				>;
+			};
+
+			i2c1_pmx_func: i2c1-pins {
+				pinctrl-single,pins = <
+					0x01c MUX_M1 /* I2C1_SCL */
+					0x020 MUX_M1 /* I2C1_SDA */
+				>;
+			};
+
+			i2c7_pmx_func: i2c7-pins {
+				pinctrl-single,pins = <
+					0x024 MUX_M3 /* I2C7_SCL */
+					0x028 MUX_M3 /* I2C7_SDA */
+				>;
+			};
+
+			pcie_pmx_func: pcie-pins {
+				pinctrl-single,pins = <
+					0x084 MUX_M1 /* PCIE_CLKREQ_N */
+					0x088 MUX_M1 /* PCIE_WAKE_N */
+				>;
+			};
+
+			spi2_pmx_func: spi2-pins {
+				pinctrl-single,pins = <
+					0x08c MUX_M1 /* SPI2_CLK */
+					0x090 MUX_M1 /* SPI2_DI */
+					0x094 MUX_M1 /* SPI2_DO */
+					0x098 MUX_M1 /* SPI2_CS0_N */
+				>;
+			};
+
+			i2s0_pmx_func: i2s0-pins {
+				pinctrl-single,pins = <
+					0x034 MUX_M1 /* I2S0_DI */
+					0x038 MUX_M1 /* I2S0_DO */
+					0x03c MUX_M1 /* I2S0_XCLK */
+					0x040 MUX_M1 /* I2S0_XFS */
+				>;
+			};
+		};
+
+		pmx5: pinmux@e896c800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xe896c800 0x0 0x200>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			pmu_cfg_func: pmu-cfg-pins {
+				pinctrl-single,pins = <
+					0x010 0x0 /* PMU1_SSI */
+					0x014 0x0 /* PMU2_SSI */
+					0x018 0x0 /* PMU_CLKOUT */
+					0x10c 0x0 /* PMU_HKADC_SSI */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			i2c3_cfg_func: i2c3-cfg-pins {
+				pinctrl-single,pins = <
+					0x038 0x0 /* I2C3_SCL */
+					0x03c 0x0 /* I2C3_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			csi0_pwd_n_cfg_func: csi0-pwd-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x050 0x0 /* CSI0_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			csi1_pwd_n_cfg_func: csi1-pwd-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x058 0x0 /* CSI1_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			isp0_cfg_func: isp0-cfg-pins {
+				pinctrl-single,pins = <
+					0x064 0x0 /* ISP_CLK0 */
+					0x070 0x0 /* ISP_SCL0 */
+					0x074 0x0 /* ISP_SDA0 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK>;
+			};
+
+			isp1_cfg_func: isp1-cfg-pins {
+				pinctrl-single,pins = <
+					0x068 0x0 /* ISP_CLK1 */
+					0x078 0x0 /* ISP_SCL1 */
+					0x07c 0x0 /* ISP_SDA1 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			pwr_key_cfg_func: pwr-key-cfg-pins {
+				pinctrl-single,pins = <
+					0x08c 0x0 /* GPIO_034 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart1_cfg_func: uart1-cfg-pins {
+				pinctrl-single,pins = <
+					0x0b4 0x0 /* UART1_RXD */
+					0x0b8 0x0 /* UART1_TXD */
+					0x0bc 0x0 /* UART1_CTS_N */
+					0x0c0 0x0 /* UART1_RTS_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart2_cfg_func: uart2-cfg-pins {
+				pinctrl-single,pins = <
+					0x0c8 0x0 /* UART2_CTS_N */
+					0x0cc 0x0 /* UART2_RTS_N */
+					0x0d0 0x0 /* UART2_TXD */
+					0x0d4 0x0 /* UART2_RXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart5_cfg_func: uart5-cfg-pins {
+				pinctrl-single,pins = <
+					0x0c8 0x0 /* UART5_RXD */
+					0x0cc 0x0 /* UART5_TXD */
+					0x0d0 0x0 /* UART5_CTS_N */
+					0x0d4 0x0 /* UART5_RTS_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			cam0_rst_cfg_func: cam0-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x0d4 0x0 /* CAM0_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart0_cfg_func: uart0-cfg-pins {
+				pinctrl-single,pins = <
+					0x0d8 0x0 /* UART0_RXD */
+					0x0dc 0x0 /* UART0_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart6_cfg_func: uart6-cfg-pins {
+				pinctrl-single,pins = <
+					0x0d8 0x0 /* UART6_CTS_N */
+					0x0dc 0x0 /* UART6_RTS_N */
+					0x0e0 0x0 /* UART6_RXD */
+					0x0e4 0x0 /* UART6_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart3_cfg_func: uart3-cfg-pins {
+				pinctrl-single,pins = <
+					0x0e8 0x0 /* UART3_CTS_N */
+					0x0ec 0x0 /* UART3_RTS_N */
+					0x0f0 0x0 /* UART3_RXD */
+					0x0f4 0x0 /* UART3_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart4_cfg_func: uart4-cfg-pins {
+				pinctrl-single,pins = <
+					0x0f8 0x0 /* UART4_CTS_N */
+					0x0fc 0x0 /* UART4_RTS_N */
+					0x100 0x0 /* UART4_RXD */
+					0x104 0x0 /* UART4_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			cam1_rst_cfg_func: cam1-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x130 0x0 /* CAM1_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx6: pinmux@ff3b6800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff3b6800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			ufs_cfg_func: ufs-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* UFS_REF_CLK */
+					0x004 0x0 /* UFS_RST_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_08MA DRIVE6_MASK
+				>;
+			};
+
+			spi3_cfg_func: spi3-cfg-pins {
+				pinctrl-single,pins = <
+					0x008 0x0 /* SPI3_CLK */
+					0x00c 0x0 /* SPI3_DI */
+					0x010 0x0 /* SPI3_DO */
+					0x014 0x0 /* SPI3_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx7: pinmux@ff3fd800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff3fd800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sdio_clk_cfg_func: sdio-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SDIO_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA DRIVE6_MASK
+				>;
+			};
+
+			sdio_cfg_func: sdio-cfg-pins {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SDIO_CMD */
+					0x008 0x0 /* SDIO_DATA0 */
+					0x00c 0x0 /* SDIO_DATA1 */
+					0x010 0x0 /* SDIO_DATA2 */
+					0x014 0x0 /* SDIO_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx8: pinmux@ff37e800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff37e800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sd_clk_cfg_func: sd-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SD_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA
+					DRIVE6_MASK
+				>;
+			};
+
+			sd_cfg_func: sd-cfg-pins {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SD_CMD */
+					0x008 0x0 /* SD_DATA0 */
+					0x00c 0x0 /* SD_DATA1 */
+					0x010 0x0 /* SD_DATA2 */
+					0x014 0x0 /* SD_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA
+					DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx9: pinmux@fff11800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xfff11800 0x0 0xbc>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			i2c0_cfg_func: i2c0-cfg-pins {
+				pinctrl-single,pins = <
+					0x01c 0x0 /* I2C0_SCL */
+					0x020 0x0 /* I2C0_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2c1_cfg_func: i2c1-cfg-pins {
+				pinctrl-single,pins = <
+					0x024 0x0 /* I2C1_SCL */
+					0x028 0x0 /* I2C1_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2c7_cfg_func: i2c7-cfg-pins {
+				pinctrl-single,pins = <
+					0x02c 0x0 /* I2C7_SCL */
+					0x030 0x0 /* I2C7_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			slimbus_cfg_func: slimbus-cfg-pins {
+				pinctrl-single,pins = <
+					0x034 0x0 /* SLIMBUS_CLK */
+					0x038 0x0 /* SLIMBUS_DATA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2s0_cfg_func: i2s0-cfg-pins {
+				pinctrl-single,pins = <
+					0x040 0x0 /* I2S0_DI */
+					0x044 0x0 /* I2S0_DO */
+					0x048 0x0 /* I2S0_XCLK */
+					0x04c 0x0 /* I2S0_XFS */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2s2_cfg_func: i2s2-cfg-pins {
+				pinctrl-single,pins = <
+					0x050 0x0 /* I2S2_DI */
+					0x054 0x0 /* I2S2_DO */
+					0x058 0x0 /* I2S2_XCLK */
+					0x05c 0x0 /* I2S2_XFS */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			pcie_cfg_func: pcie-cfg-pins {
+				pinctrl-single,pins = <
+					0x094 0x0 /* PCIE_CLKREQ_N */
+					0x098 0x0 /* PCIE_WAKE_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			spi2_cfg_func: spi2-cfg-pins {
+				pinctrl-single,pins = <
+					0x09c 0x0 /* SPI2_CLK */
+					0x0a0 0x0 /* SPI2_DI */
+					0x0a4 0x0 /* SPI2_DO */
+					0x0a8 0x0 /* SPI2_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			usb_cfg_func: usb-cfg-pins {
+				pinctrl-single,pins = <
+					0x0ac 0x0 /* GPIO_219 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
new file mode 100644
index 0000000000..8f7bf80e6e
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
@@ -0,0 +1,969 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl dts file for HiSilicon HiKey970 development board
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+	soc {
+		range: gpio-range {
+			#pinctrl-single,gpio-range-cells = <3>;
+		};
+
+		pmx0: pinmux@e896c000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xe896c000 0x0 0x72c>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 82 0>;
+
+			uart0_pmx_func: uart0-pins {
+				pinctrl-single,pins = <
+					0x054 MUX_M2 /* UART0_RXD */
+					0x058 MUX_M2 /* UART0_TXD */
+				>;
+			};
+
+			uart2_pmx_func: uart2-pins {
+				pinctrl-single,pins = <
+					0x700 MUX_M2 /* UART2_CTS_N */
+					0x704 MUX_M2 /* UART2_RTS_N */
+					0x708 MUX_M2 /* UART2_RXD */
+					0x70c MUX_M2 /* UART2_TXD */
+				>;
+			};
+
+			uart3_pmx_func: uart3-pins {
+				pinctrl-single,pins = <
+					0x064 MUX_M1 /* UART3_CTS_N */
+					0x068 MUX_M1 /* UART3_RTS_N */
+					0x06c MUX_M1 /* UART3_RXD */
+					0x070 MUX_M1 /* UART3_TXD */
+				>;
+			};
+
+			uart4_pmx_func: uart4-pins {
+				pinctrl-single,pins = <
+					0x074 MUX_M1 /* UART4_CTS_N */
+					0x078 MUX_M1 /* UART4_RTS_N */
+					0x07c MUX_M1 /* UART4_RXD */
+					0x080 MUX_M1 /* UART4_TXD */
+				>;
+			};
+
+			uart6_pmx_func: uart6-pins {
+				pinctrl-single,pins = <
+					0x05c MUX_M1 /* UART6_RXD */
+					0x060 MUX_M1 /* UART6_TXD */
+				>;
+			};
+
+			i2c3_pmx_func: i2c3-pins {
+				pinctrl-single,pins = <
+					0x010 MUX_M1 /* I2C3_SCL */
+					0x014 MUX_M1 /* I2C3_SDA */
+				>;
+			};
+
+			i2c4_pmx_func: i2c4-pins {
+				pinctrl-single,pins = <
+					0x03c MUX_M1 /* I2C4_SCL */
+					0x040 MUX_M1 /* I2C4_SDA */
+				>;
+			};
+
+			cam0_rst_pmx_func: cam0-rst-pins {
+				pinctrl-single,pins = <
+					0x714 MUX_M0 /* CAM0_RST */
+				>;
+			};
+
+			cam1_rst_pmx_func: cam1-rst-pins {
+				pinctrl-single,pins = <
+					0x048 MUX_M0 /* CAM1_RST */
+				>;
+			};
+
+			cam0_pwd_n_pmx_func: cam0-pwd-n-pins {
+				pinctrl-single,pins = <
+					0x098 MUX_M0 /* CAM0_PWD_N */
+				>;
+			};
+
+			cam1_pwd_n_pmx_func: cam1-pwd-n-pins {
+				pinctrl-single,pins = <
+					0x044 MUX_M0 /* CAM1_PWD_N */
+				>;
+			};
+
+			isp0_pmx_func: isp0-pins {
+				pinctrl-single,pins = <
+					0x018 MUX_M1 /* ISP_CLK0 */
+					0x024 MUX_M1 /* ISP_SCL0 */
+					0x028 MUX_M1 /* ISP_SDA0 */
+				>;
+			};
+
+			isp1_pmx_func: isp1-pins {
+				pinctrl-single,pins = <
+					0x01c MUX_M1 /* ISP_CLK1 */
+					0x02c MUX_M1 /* ISP_SCL1 */
+					0x030 MUX_M1 /* ISP_SDA1 */
+				>;
+			};
+		};
+
+		pmx1: pinmux@fff11000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xfff11000 0x0 0x73c>;
+			#gpio-range-cells = <0x3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 46 0>;
+
+			pwr_key_pmx_func: pwr-key-pins {
+				pinctrl-single,pins = <
+					0x064 MUX_M0 /* GPIO_203 */
+				>;
+			};
+
+			pd_pmx_func: pd-pins {
+				pinctrl-single,pins = <
+					0x080 MUX_M0 /* GPIO_221 */
+				>;
+			};
+
+			i2s2_pmx_func: i2s2-pins {
+			    pinctrl-single,pins = <
+					0x050 MUX_M1 /* I2S2_DI */
+					0x054 MUX_M1 /* I2S2_DO */
+					0x058 MUX_M1 /* I2S2_XCLK */
+					0x05c MUX_M1 /* I2S2_XFS */
+			    >;
+			};
+
+			spi0_pmx_func: spi0-pins {
+				pinctrl-single,pins = <
+					0x094 MUX_M1 /* SPI0_CLK */
+					0x098 MUX_M1 /* SPI0_DI */
+					0x09c MUX_M1 /* SPI0_DO */
+					0x0a0 MUX_M1 /* SPI0_CS0_N */
+				>;
+			};
+
+			spi2_pmx_func: spi2-pins {
+				pinctrl-single,pins = <
+					0x710 MUX_M1 /* SPI2_CLK */
+					0x714 MUX_M1 /* SPI2_DI */
+					0x718 MUX_M1 /* SPI2_DO */
+					0x71c MUX_M1 /* SPI2_CS0_N */
+				>;
+			};
+
+			spi3_pmx_func: spi3-pins {
+				pinctrl-single,pins = <
+					0x72c MUX_M1 /* SPI3_CLK */
+					0x730 MUX_M1 /* SPI3_DI */
+					0x734 MUX_M1 /* SPI3_DO */
+					0x738 MUX_M1 /* SPI3_CS0_N */
+				>;
+			};
+
+			i2c0_pmx_func: i2c0-pins {
+				pinctrl-single,pins = <
+					0x020 MUX_M1 /* I2C0_SCL */
+					0x024 MUX_M1 /* I2C0_SDA */
+				>;
+			};
+
+			i2c1_pmx_func: i2c1-pins {
+				pinctrl-single,pins = <
+					0x028 MUX_M1 /* I2C1_SCL */
+					0x02c MUX_M1 /* I2C1_SDA */
+				>;
+			};
+			i2c2_pmx_func: i2c2-pins {
+				pinctrl-single,pins = <
+					0x030 MUX_M1 /* I2C2_SCL */
+					0x034 MUX_M1 /* I2C2_SDA */
+				>;
+			};
+
+			pcie_clkreq_pmx_func: pcie-clkreq-pins {
+				pinctrl-single,pins = <
+					0x084 MUX_M1 /* PCIE0_CLKREQ_N */
+				>;
+			};
+
+			gpio185_pmx_func: gpio185-pins {
+				pinctrl-single,pins = <0x01C    0x1>;
+			};
+
+			gpio185_pmx_idle: gpio185-idle-pins {
+				pinctrl-single,pins = <0x01C    0x0>;
+			};
+		};
+
+		pmx2: pinmux@e896c800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xe896c800 0x0 0x72c>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			uart0_cfg_func: uart0-cfg-pins {
+				pinctrl-single,pins = <
+					0x058 0x0 /* UART0_RXD */
+					0x05c 0x0 /* UART0_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart2_cfg_func: uart2-cfg-pins {
+				pinctrl-single,pins = <
+					0x700 0x0 /* UART2_CTS_N */
+					0x704 0x0 /* UART2_RTS_N */
+					0x708 0x0 /* UART2_RXD */
+					0x70c 0x0 /* UART2_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart3_cfg_func: uart3-cfg-pins {
+				pinctrl-single,pins = <
+					0x068 0x0 /* UART3_CTS_N */
+					0x06c 0x0 /* UART3_RTS_N */
+					0x070 0x0 /* UART3_RXD */
+					0x074 0x0 /* UART3_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart4_cfg_func: uart4-cfg-pins {
+				pinctrl-single,pins = <
+					0x078 0x0 /* UART4_CTS_N */
+					0x07c 0x0 /* UART4_RTS_N */
+					0x080 0x0 /* UART4_RXD */
+					0x084 0x0 /* UART4_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart6_cfg_func: uart6-cfg-pins {
+				pinctrl-single,pins = <
+					0x060 0x0 /* UART6_RXD */
+					0x064 0x0 /* UART6_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2c3_cfg_func: i2c3-cfg-pins {
+				pinctrl-single,pins = <
+					0x014 0x0 /* I2C3_SCL */
+					0x018 0x0 /* I2C3_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			i2c4_cfg_func: i2c4-cfg-pins {
+				pinctrl-single,pins = <
+					0x040 0x0 /* I2C4_SCL */
+					0x044 0x0 /* I2C4_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			cam0_rst_cfg_func: cam0-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x714 0x0 /* CAM0_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			cam1_rst_cfg_func: cam1-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x04C 0x0 /* CAM1_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			cam0_pwd_n_cfg_func: cam0-pwd-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x09C 0x0 /* CAM0_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			cam1_pwd_n_cfg_func: cam1-pwd-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x048 0x0 /* CAM1_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			isp0_cfg_func: isp0-cfg-pins {
+				pinctrl-single,pins = <
+					0x01C 0x0 /* ISP_CLK0 */
+					0x028 0x0 /* ISP_SCL0 */
+					0x02C 0x0 /* ISP_SDA0 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			isp1_cfg_func: isp1-cfg-pins {
+				pinctrl-single,pins = <
+					0x020 0x0 /* ISP_CLK1 */
+					0x030 0x0 /* ISP_SCL1 */
+					0x034 0x0 /* ISP_SDA1 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx5: pinmux@fc182000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xfc182000 0x0 0x028>;
+			#gpio-range-cells = <3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 10 0>;
+
+			sdio_pmx_func: sdio-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SDIO_CLK */
+					0x004 MUX_M1 /* SDIO_CMD */
+					0x008 MUX_M1 /* SDIO_DATA0 */
+					0x00c MUX_M1 /* SDIO_DATA1 */
+					0x010 MUX_M1 /* SDIO_DATA2 */
+					0x014 MUX_M1 /* SDIO_DATA3 */
+				>;
+			};
+		};
+
+		pmx6: pinmux@fc182800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xfc182800 0x0 0x028>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sdio_clk_cfg_func: sdio-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SDIO_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA DRIVE6_MASK
+				>;
+			};
+
+			sdio_cfg_func: sdio-cfg-pins {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SDIO_CMD */
+					0x008 0x0 /* SDIO_DATA0 */
+					0x00c 0x0 /* SDIO_DATA1 */
+					0x010 0x0 /* SDIO_DATA2 */
+					0x014 0x0 /* SDIO_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx7: pinmux@ff37e000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff37e000 0x0 0x030>;
+			#gpio-range-cells = <3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 12 0>;
+
+			sd_pmx_func: sd-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SD_CLK */
+					0x004 MUX_M1 /* SD_CMD */
+					0x008 MUX_M1 /* SD_DATA0 */
+					0x00c MUX_M1 /* SD_DATA1 */
+					0x010 MUX_M1 /* SD_DATA2 */
+					0x014 MUX_M1 /* SD_DATA3 */
+				>;
+			};
+		};
+
+		pmx8: pinmux@ff37e800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff37e800 0x0 0x030>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sd_clk_cfg_func: sd-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SD_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA
+					DRIVE6_MASK
+				>;
+			};
+
+			sd_cfg_func: sd-cfg-pins {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SD_CMD */
+					0x008 0x0 /* SD_DATA0 */
+					0x00c 0x0 /* SD_DATA1 */
+					0x010 0x0 /* SD_DATA2 */
+					0x014 0x0 /* SD_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA
+					DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx16: pinmux@fff11800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xfff11800 0x0 0x73c>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			pwr_key_cfg_func: pwr-key-cfg-pins {
+				pinctrl-single,pins = <
+					0x090 0x0 /* GPIO_203 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			usb_cfg_func: usb-cfg-pins {
+				pinctrl-single,pins = <
+					0x0AC 0x0 /* GPIO_221 */
+				>;
+				pinctrl-single,bias-pulldown  = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup    = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			spi0_cfg_func: spi0-cfg-pins {
+				pinctrl-single,pins = <
+					0x0c8 0x0 /* SPI0_DI */
+					0x0cc 0x0 /* SPI0_DO */
+					0x0d0 0x0 /* SPI0_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			spi2_cfg_func: spi2-cfg-pins {
+				pinctrl-single,pins = <
+					0x714 0x0 /* SPI2_DI */
+					0x718 0x0 /* SPI2_DO */
+					0x71c 0x0 /* SPI2_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			spi3_cfg_func: spi3-cfg-pins {
+				pinctrl-single,pins = <
+					0x730 0x0 /* SPI3_DI */
+					0x734 0x0 /* SPI3_DO */
+					0x738 0x0 /* SPI3_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			spi0_clk_cfg_func: spi0-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x0c4 0x0 /* SPI0_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_10MA DRIVE6_MASK
+				>;
+			};
+
+			spi2_clk_cfg_func: spi2-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x710 0x0 /* SPI2_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_10MA DRIVE6_MASK
+				>;
+			};
+
+			spi3_clk_cfg_func: spi3-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x72c 0x0 /* SPI3_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_10MA DRIVE6_MASK
+				>;
+			};
+
+			i2c0_cfg_func: i2c0-cfg-pins {
+				pinctrl-single,pins = <
+					0x04c 0x0 /* I2C0_SCL */
+					0x050 0x0 /* I2C0_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			i2c1_cfg_func: i2c1-cfg-pins {
+				pinctrl-single,pins = <
+					0x054 0x0 /* I2C1_SCL */
+					0x058 0x0 /* I2C1_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			i2c2_cfg_func: i2c2-cfg-pins {
+				pinctrl-single,pins = <
+					0x05c 0x0 /* I2C2_SCL */
+					0x060 0x0 /* I2C2_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			pcie_clkreq_cfg_func: pcie-clkreq-cfg-pins {
+				pinctrl-single,pins = <
+					0x0b0 0x0
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+			i2s2_cfg_func: i2s2-cfg-pins {
+				pinctrl-single,pins = <
+					0x07c 0x0 /* I2S2_DI */
+					0x080 0x0 /* I2S2_DO */
+					0x084 0x0 /* I2S2_XCLK */
+					0x088 0x0 /* I2S2_XFS */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			gpio185_cfg_func: gpio185-cfg-pins {
+				pinctrl-single,pins = <0x048  0>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x00 0x70>;
+				pinctrl-single,slew-rate = <0x0 0x80>;
+			};
+
+			gpio185_cfg_idle: gpio185-cfg-idle-pins {
+				pinctrl-single,pins = <0x048  0>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x00 0x70>;
+				pinctrl-single,slew-rate = <0x0 0x80>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
new file mode 100644
index 0000000000..c06e011a6c
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	spmi: spmi@fff24000 {
+		compatible = "hisilicon,kirin970-spmi-controller";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		status = "okay";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
+		hisilicon,spmi-channel = <2>;
+
+		pmic: pmic@0 {
+			compatible = "hisilicon,hi6421-spmi";
+			reg = <0 SPMI_USID>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpios = <&gpio28 0 0>;
+
+			regulators {
+				ldo3: ldo3 { /* HDMI */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-boot-on;
+				};
+
+				ldo4: ldo4 { /* 40 PIN */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1725000>;
+					regulator-max-microvolt = <1900000>;
+					regulator-boot-on;
+				};
+
+				ldo9: ldo9 { /* SDCARD I/O */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1750000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo15: ldo15 { /* UFS */
+					regulator-name = "ldo15";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo16: ldo16 { /* SD */
+					regulator-name = "ldo16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldo17: ldo17 { /* USB HUB */
+					regulator-name = "ldo17";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo33: ldo33 { /* PEX8606 */
+					regulator-name = "ldo33";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo34: ldo34 { /* GPS AUX IN VDD */
+					regulator-name = "ldo34";
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <3300000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
new file mode 100644
index 0000000000..c4eaebbb44
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 HiSilicon Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hip05.dtsi"
+
+/ {
+	model = "Hisilicon Hip05 D02 Development Board";
+	compatible = "hisilicon,hip05-d02";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x80000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pwr-button {
+			label = "Power Button";
+			gpios = <&porta 8 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			debounce-interval = <0>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&peri_gpio0 {
+	status = "okay";
+};
+
+&lbc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x0 0x90000000 0x08000000>,
+		 <1 0 0x0 0x98000000 0x08000000>;
+
+	nor-flash@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "numonyx,js28f00a", "cfi-flash";
+		reg = <0 0x0 0x08000000>;
+		bank-width = <2>;
+		/* The three parts may not used */
+		partition@0 {
+			label = "BIOS";
+			reg = <0x0 0x300000>;
+		};
+		partition@300000 {
+			label = "Linux";
+			reg = <0x300000 0xa00000>;
+		};
+		partition@1000000 {
+			label = "Rootfs";
+			reg = <0x01000000 0x02000000>;
+		};
+	};
+
+	cpld@1,0 {
+		compatible = "hisilicon,hip05-cpld";
+		reg = <1 0x0 0x100>;
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
new file mode 100644
index 0000000000..65ddc0698f
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip05-d02";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+		};
+
+		cpu0: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu1: cpu@20001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu2: cpu@20002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu3: cpu@20003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu4: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu5: cpu@20101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu6: cpu@20102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu7: cpu@20103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu8: cpu@20200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu9: cpu@20201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu10: cpu@20202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu11: cpu@20203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu12: cpu@20300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu13: cpu@20301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu14: cpu@20302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu15: cpu@20303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@8d000000 {
+		compatible = "arm,gic-v3";
+                #interrupt-cells = <3>;
+                #address-cells = <2>;
+                #size-cells = <2>;
+                ranges;
+                interrupt-controller;
+                #redistributor-regions = <1>;
+                redistributor-stride = <0x0 0x30000>;
+		reg = <0x0 0x8d000000 0 0x10000>,	/* GICD */
+		      <0x0 0x8d100000 0 0x300000>,	/* GICR */
+		      <0x0 0xfe000000 0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0 0x10000>,       /* GICH */
+		      <0x0 0xfe020000 0 0x10000>;       /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its_peri: msi-controller@8c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0x8c000000 0x0 0x40000>;
+		};
+
+		its_m3: msi-controller@a3000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xa3000000 0x0 0x40000>;
+		};
+
+		its_pcie: msi-controller@b7000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xb7000000 0x0 0x40000>;
+		};
+
+		its_dsa: msi-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		refclk200mhz: refclk200mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart0: serial@80300000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x80300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&refclk200mhz>, <&refclk200mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@80310000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x80310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&refclk200mhz>, <&refclk200mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		lbc: local-bus@80380000 {
+			compatible = "hisilicon,hisi-localbus", "simple-bus";
+			reg = <0x0 0x80380000 0x0 0x10000>;
+			status = "disabled";
+		};
+
+		peri_gpio0: gpio@802e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802e0000 0x0 0x10000>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		peri_gpio1: gpio@802f0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802f0000 0x0 0x10000>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
new file mode 100644
index 0000000000..35af5d3821
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D03 Development Board
+ *
+ * Copyright (C) 2016 HiSilicon Ltd.
+ */
+
+/dts-v1/;
+
+#include "hip06.dtsi"
+
+/ {
+	model = "Hisilicon Hip06 D03 Development Board";
+	compatible = "hisilicon,hip06-d03";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;
+	};
+
+	chosen { };
+};
+
+&ipmi0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&eth2 {
+	status = "okay";
+};
+
+&eth3 {
+	status = "okay";
+};
+
+&sas1 {
+	status = "okay";
+};
+
+&usb_ohci {
+	status = "okay";
+};
+
+&usb_ehci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
new file mode 100644
index 0000000000..f46c33d107
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D03 Development Board
+ *
+ * Copyright (C) 2016 HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip06-d03";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+		};
+
+		cpu0: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu1: cpu@10001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu2: cpu@10002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu3: cpu@10003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu4: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu5: cpu@10101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu6: cpu@10102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu7: cpu@10103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu8: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu9: cpu@10201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu10: cpu@10202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu11: cpu@10203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu12: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu13: cpu@10301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu14: cpu@10302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu15: cpu@10303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@4d000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		redistributor-stride = <0x0 0x30000>;
+		reg = <0x0 0x4d000000 0 0x10000>,	/* GICD */
+		      <0x0 0x4d100000 0 0x300000>,	/* GICR */
+		      <0x0 0xfe000000 0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0 0x10000>,       /* GICH */
+		      <0x0 0xfe020000 0 0x10000>;       /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its_dsa: msi-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	mbigen_pcie@a0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xa0080000 0x0 0x10000>;
+
+		mbigen_usb: intc_usb {
+			msi-parent = <&its_dsa 0x40080>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <2>;
+		};
+
+		mbigen_sas1: intc_sas1 {
+			msi-parent = <&its_dsa 0x40000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_sas2: intc_sas2 {
+			msi-parent = <&its_dsa 0x40040>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_pcie0: intc_pcie0 {
+			msi-parent = <&its_dsa 0x40085>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <10>;
+		};
+	};
+
+	mbigen_dsa@c0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xc0080000 0x0 0x10000>;
+
+		mbigen_dsaf0: intc_dsaf0 {
+			msi-parent = <&its_dsa 0x40800>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <409>;
+		};
+
+		mbigen_sas0: intc-sas0 {
+			msi-parent = <&its_dsa 0x40900>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+	};
+
+	/**
+	 *  HiSilicon erratum 161010801: This describes the limitation
+	 *  of HiSilicon platforms hip06/hip07 to support the SMMUv3
+	 *  mappings for PCIe MSI transactions.
+	 *  PCIe controller on these platforms has to differentiate the
+	 *  MSI payload against other DMA payload and has to modify the
+	 *  MSI payload. This makes it difficult for these platforms to
+	 *  have a SMMU translation for MSI. In order to workaround this,
+	 *  ARM SMMUv3 driver requires a quirk to treat the MSI regions
+	 *  separately. Such a quirk is currently missing for DT based
+	 *  systems. Hence please make sure that the smmu pcie node on
+	 *  hip06 is disabled as this will break the PCIe functionality
+	 *  when iommu-map entry is used along with the PCIe node.
+	 *  Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html
+	 */
+	smmu0: iommu@a0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0xa0040000 0x0 0x20000>;
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		isa@a01b0000 {
+			compatible = "hisilicon,hip06-lpc";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			reg = <0x0 0xa01b0000 0x0 0x1000>;
+
+			ipmi0: bt@e4 {
+				compatible = "ipmi-bt";
+				device_type = "ipmi";
+				reg = <0x01 0xe4 0x04>;
+				status = "disabled";
+			};
+
+			uart0: serial@2f8 {
+				compatible = "ns16550a";
+				clock-frequency = <1843200>;
+				reg = <0x01 0x2f8 0x08>;
+				status = "disabled";
+			};
+		};
+
+		refclk: refclk {
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			#clock-cells = <0>;
+		};
+
+		usb_ohci: usb@a7030000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0xa7030000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <640 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb_ehci: usb@a7020000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0xa7020000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <641 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		peri_c_subctrl: sub_ctrl_c@60000000 {
+			compatible = "hisilicon,peri-subctrl","syscon";
+			reg = <0 0x60000000 0x0 0x10000>;
+		};
+
+		dsa_subctrl: dsa_subctrl@c0000000 {
+			compatible = "hisilicon,dsa-subctrl", "syscon";
+			reg = <0x0 0xc0000000 0x0 0x10000>;
+		};
+
+		pcie_subctl: pcie_subctl@a0000000 {
+			compatible = "hisilicon,pcie-sas-subctrl", "syscon";
+			reg = <0x0 0xa0000000 0x0 0x10000>;
+		};
+
+		serdes_ctrl: sds_ctrl@c2200000 {
+			compatible = "syscon";
+			reg = <0 0xc2200000 0x0 0x80000>;
+		};
+
+		mdio@603c0000 {
+			compatible = "hisilicon,hns-mdio";
+			reg = <0x0 0x603c0000 0x0 0x1000>;
+			subctrl-vbase = <&peri_c_subctrl 0x338 0xa38 0x531c 0x5a1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+			};
+		};
+
+		dsaf0: dsa@c7000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "hisilicon,hns-dsaf-v2";
+			mode = "6port-16rss";
+			reg = <0x0 0xc5000000 0x0 0x890000>,
+			      <0x0 0xc7000000 0x0 0x600000>;
+			reg-names = "ppe-base", "dsaf-base";
+			interrupt-parent = <&mbigen_dsaf0>;
+			subctrl-syscon = <&dsa_subctrl>;
+			reset-field-offset = <0>;
+			interrupts =
+			<576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
+			<581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
+			<586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
+			<591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
+			<596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
+			<960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
+			<965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
+			<970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
+			<975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
+			<980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
+			<985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
+			<990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
+			<995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
+			<1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
+			<1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
+			<1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
+			<1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
+			<1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
+			<1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
+			<1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
+			<1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
+			<1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
+			<1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
+			<1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
+			<1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
+			<1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
+			<1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
+			<1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
+			<1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
+			<1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
+			<1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
+			<1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
+			<1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
+			<1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
+			<1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
+			<1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
+			<1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
+			<1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
+			<1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
+			<1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
+			<1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
+			<1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
+			<1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
+			<1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
+			<1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
+			<1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
+			<1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
+			<1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
+			<1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
+			<1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
+			<1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
+			<1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
+			<1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
+			<1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
+			<1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
+			<1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
+			<1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
+			<1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
+			<1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
+			<1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
+			<1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
+			<1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
+			<1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
+			<1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
+			<1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
+			<1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
+			<1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
+			<1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
+			<1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
+			<1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
+			<1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
+			<1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
+			<1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
+			<1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
+			<1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
+			<1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
+			<1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
+			<1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
+			<1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
+			<1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
+			<1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
+			<1340 1>, <1341 1>, <1342 1>, <1343 1>;
+
+			desc-num = <0x400>;
+			buf-size = <0x1000>;
+			dma-coherent;
+
+			port@0 {
+				reg = <0>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <0>;
+				port-mode-offset = <0>;
+				media-type = "fiber";
+			};
+
+			port@1 {
+				reg = <1>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <1>;
+				port-mode-offset = <1>;
+				media-type = "fiber";
+			};
+
+			port@4 {
+				reg = <4>;
+				phy-handle = <&phy0>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <4>;
+				port-mode-offset = <2>;
+				media-type = "copper";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-handle = <&phy1>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <5>;
+				port-mode-offset = <3>;
+				media-type = "copper";
+			};
+		};
+
+		eth0: ethernet-4 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <4>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth1: ethernet-5 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <5>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth2: ethernet-0 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <0>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth3: ethernet-1 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		sas0: sas@c3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xc3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&dsa_subctrl>;
+			ctrl-reset-reg = <0xa60>;
+			ctrl-reset-sts-reg = <0x5a30>;
+			ctrl-clock-ena-reg = <0x338>;
+			clocks = <&refclk 0>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas0>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <75 4>,<76 4>,<77 4>,<78 4>,<79 4>,
+				     <80 4>,<81 4>,<82 4>,<83 4>,<84 4>,
+				     <85 4>,<86 4>,<87 4>,<88 4>,<89 4>,
+				     <90 4>,<91 4>,<92 4>,<93 4>,<94 4>,
+				     <95 4>,<96 4>,<97 4>,<98 4>,<99 4>,
+				     <100 4>,<101 4>,<102 4>,<103 4>,<104 4>,
+				     <105 4>,<106 4>,<107 4>,<108 4>,<109 4>,
+				     <110 4>,<111 4>,<112 4>,<113 4>,<114 4>,
+				     <115 4>,<116 4>,<117 4>,<118 4>,<119 4>,
+				     <120 4>,<121 4>,<122 4>,<123 4>,<124 4>,
+				     <125 4>,<126 4>,<127 4>,<128 4>,<129 4>,
+				     <130 4>,<131 4>,<132 4>,<133 4>,<134 4>,
+				     <135 4>,<136 4>,<137 4>,<138 4>,<139 4>,
+				     <140 4>,<141 4>,<142 4>,<143 4>,<144 4>,
+				     <145 4>,<146 4>,<147 4>,<148 4>,<149 4>,
+				     <150 4>,<151 4>,<152 4>,<153 4>,<154 4>,
+				     <155 4>,<156 4>,<157 4>,<158 4>,<159 4>,
+				     <160 4>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>,<608 1>,<609 1>,
+				     <610 1>,<611 1>,<612 1>,<613 1>,<614 1>,
+				     <615 1>,<616 1>,<617 1>,<618 1>,<619 1>,
+				     <620 1>,<621 1>,<622 1>,<623 1>,<624 1>,
+				     <625 1>,<626 1>,<627 1>,<628 1>,<629 1>,
+				     <630 1>,<631 1>,<632 1>;
+			status = "disabled";
+		};
+
+		sas1: sas@a2000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa2000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			hip06-sas-v2-quirk-amt;
+			ctrl-reset-reg = <0xa18>;
+			ctrl-reset-sts-reg = <0x5a0c>;
+			ctrl-clock-ena-reg = <0x318>;
+			clocks = <&refclk 0>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas1>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+				     <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+				     <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+				     <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+				     <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+				     <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+				     <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+				     <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+				     <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+				     <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+				     <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+				     <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+				     <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+				     <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+				     <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+				     <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+				     <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+				     <159 4>,<576 1>,<577 1>,<578 1>,<579 1>,
+				     <580 1>,<581 1>,<582 1>,<583 1>,<584 1>,
+				     <585 1>,<586 1>,<587 1>,<588 1>,<589 1>,
+				     <590 1>,<591 1>,<592 1>,<593 1>,<594 1>,
+				     <595 1>,<596 1>,<597 1>,<598 1>,<599 1>,
+				     <600 1>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>;
+			status = "disabled";
+		};
+
+		sas2: sas@a3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			ctrl-reset-reg = <0xae0>;
+			ctrl-reset-sts-reg = <0x5a70>;
+			ctrl-clock-ena-reg = <0x3a8>;
+			clocks = <&refclk 0>;
+			queue-count = <16>;
+			phy-count = <9>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas2>;
+			interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>,
+				     <197 4>,<198 4>,<199 4>,<200 4>,<201 4>,
+				     <202 4>,<203 4>,<204 4>,<205 4>,<206 4>,
+				     <207 4>,<208 4>,<209 4>,<210 4>,<211 4>,
+				     <212 4>,<213 4>,<214 4>,<215 4>,<216 4>,
+				     <217 4>,<218 4>,<219 4>,<220 4>,<221 4>,
+				     <222 4>,<223 4>,<224 4>,<225 4>,<226 4>,
+				     <227 4>,<228 4>,<229 4>,<230 4>,<231 4>,
+				     <232 4>,<233 4>,<234 4>,<235 4>,<236 4>,
+				     <237 4>,<238 4>,<239 4>,<240 4>,<241 4>,
+				     <242 4>,<243 4>,<244 4>,<245 4>,<246 4>,
+				     <247 4>,<248 4>,<249 4>,<250 4>,<251 4>,
+				     <252 4>,<253 4>,<254 4>,<255 4>,<256 4>,
+				     <257 4>,<258 4>,<259 4>,<260 4>,<261 4>,
+				     <262 4>,<263 4>,<264 4>,<265 4>,<266 4>,
+				     <267 4>,<268 4>,<269 4>,<270 4>,<271 4>,
+				     <272 4>,<273 4>,<274 4>,<275 4>,<276 4>,
+				     <277 4>,<278 4>,<279 4>,<280 4>,<281 4>,
+				     <282 4>,<283 4>,<284 4>,<285 4>,<286 4>,
+				     <287 4>,<608 1>,<609 1>,<610 1>,<611 1>,
+				     <612 1>,<613 1>,<614 1>,<615 1>,<616 1>,
+				     <617 1>,<618 1>,<619 1>,<620 1>,<621 1>,
+				     <622 1>,<623 1>,<624 1>,<625 1>,<626 1>,
+				     <627 1>,<628 1>,<629 1>,<630 1>,<631 1>,
+				     <632 1>,<633 1>,<634 1>,<635 1>,<636 1>,
+				     <637 1>,<638 1>,<639 1>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@a0090000 {
+			compatible = "hisilicon,hip06-pcie-ecam";
+			reg = <0 0xb0000000 0 0x2000000>,
+			      <0 0xa0090000 0 0x10000>;
+			bus-range = <0  31>;
+			msi-map = <0x0000 &its_dsa 0x0000 0x2000>;
+			msi-map-mask = <0xffff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000>,
+				 <0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
+					0x0 0 0 2 &mbigen_pcie0 650 4
+					0x0 0 0 3 &mbigen_pcie0 650 4
+					0x0 0 0 4 &mbigen_pcie0 650 4>;
+			status = "disabled";
+		};
+
+	};
+
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
new file mode 100644
index 0000000000..c3df67845f
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D05 Development Board
+ *
+ * Copyright (C) 2016 HiSilicon Ltd.
+ */
+
+/dts-v1/;
+
+#include "hip07.dtsi"
+
+/ {
+	model = "Hisilicon Hip07 D05 Development Board";
+	compatible = "hisilicon,hip07-d05";
+
+	/* the mem node will be updated by UEFI. */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;
+		numa-node-id = <0>;
+	};
+
+	distance-map {
+		compatible = "numa-distance-map-v1";
+		distance-matrix = <0 0 10>,
+				  <0 1 15>,
+				  <0 2 20>,
+				  <0 3 25>,
+				  <1 0 15>,
+				  <1 1 10>,
+				  <1 2 25>,
+				  <1 3 30>,
+				  <2 0 20>,
+				  <2 1 25>,
+				  <2 2 10>,
+				  <2 3 15>,
+				  <3 0 25>,
+				  <3 1 30>,
+				  <3 2 15>,
+				  <3 3 10>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&ipmi0 {
+	status = "okay";
+};
+
+&usb_ohci {
+	status = "okay";
+};
+
+&usb_ehci {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&eth2 {
+	status = "okay";
+};
+
+&eth3 {
+	status = "okay";
+};
+
+&sas1 {
+	status = "okay";
+};
+
+&p0_pcie2_a {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
new file mode 100644
index 0000000000..81d907ef43
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -0,0 +1,1914 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D05 Development Board
+ *
+ * Copyright (C) 2016 HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip07-d05";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu16>;
+				};
+				core1 {
+					cpu = <&cpu17>;
+				};
+				core2 {
+					cpu = <&cpu18>;
+				};
+				core3 {
+					cpu = <&cpu19>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu20>;
+				};
+				core1 {
+					cpu = <&cpu21>;
+				};
+				core2 {
+					cpu = <&cpu22>;
+				};
+				core3 {
+					cpu = <&cpu23>;
+				};
+			};
+
+			cluster6 {
+				core0 {
+					cpu = <&cpu24>;
+				};
+				core1 {
+					cpu = <&cpu25>;
+				};
+				core2 {
+					cpu = <&cpu26>;
+				};
+				core3 {
+					cpu = <&cpu27>;
+				};
+			};
+
+			cluster7 {
+				core0 {
+					cpu = <&cpu28>;
+				};
+				core1 {
+					cpu = <&cpu29>;
+				};
+				core2 {
+					cpu = <&cpu30>;
+				};
+				core3 {
+					cpu = <&cpu31>;
+				};
+			};
+
+			cluster8 {
+				core0 {
+					cpu = <&cpu32>;
+				};
+				core1 {
+					cpu = <&cpu33>;
+				};
+				core2 {
+					cpu = <&cpu34>;
+				};
+				core3 {
+					cpu = <&cpu35>;
+				};
+			};
+
+			cluster9 {
+				core0 {
+					cpu = <&cpu36>;
+				};
+				core1 {
+					cpu = <&cpu37>;
+				};
+				core2 {
+					cpu = <&cpu38>;
+				};
+				core3 {
+					cpu = <&cpu39>;
+				};
+			};
+
+			cluster10 {
+				core0 {
+					cpu = <&cpu40>;
+				};
+				core1 {
+					cpu = <&cpu41>;
+				};
+				core2 {
+					cpu = <&cpu42>;
+				};
+				core3 {
+					cpu = <&cpu43>;
+				};
+			};
+
+			cluster11 {
+				core0 {
+					cpu = <&cpu44>;
+				};
+				core1 {
+					cpu = <&cpu45>;
+				};
+				core2 {
+					cpu = <&cpu46>;
+				};
+				core3 {
+					cpu = <&cpu47>;
+				};
+			};
+
+			cluster12 {
+				core0 {
+					cpu = <&cpu48>;
+				};
+				core1 {
+					cpu = <&cpu49>;
+				};
+				core2 {
+					cpu = <&cpu50>;
+				};
+				core3 {
+					cpu = <&cpu51>;
+				};
+			};
+
+			cluster13 {
+				core0 {
+					cpu = <&cpu52>;
+				};
+				core1 {
+					cpu = <&cpu53>;
+				};
+				core2 {
+					cpu = <&cpu54>;
+				};
+				core3 {
+					cpu = <&cpu55>;
+				};
+			};
+
+			cluster14 {
+				core0 {
+					cpu = <&cpu56>;
+				};
+				core1 {
+					cpu = <&cpu57>;
+				};
+				core2 {
+					cpu = <&cpu58>;
+				};
+				core3 {
+					cpu = <&cpu59>;
+				};
+			};
+
+			cluster15 {
+				core0 {
+					cpu = <&cpu60>;
+				};
+				core1 {
+					cpu = <&cpu61>;
+				};
+				core2 {
+					cpu = <&cpu62>;
+				};
+				core3 {
+					cpu = <&cpu63>;
+				};
+			};
+		};
+
+		cpu0: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu1: cpu@10001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu2: cpu@10002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu3: cpu@10003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu4: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu5: cpu@10101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu6: cpu@10102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu7: cpu@10103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu8: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu9: cpu@10201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu10: cpu@10202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu11: cpu@10203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu12: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu13: cpu@10301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu14: cpu@10302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu15: cpu@10303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu16: cpu@30000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu17: cpu@30001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu18: cpu@30002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu19: cpu@30003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu20: cpu@30100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu21: cpu@30101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu22: cpu@30102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu23: cpu@30103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu24: cpu@30200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu25: cpu@30201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu26: cpu@30202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu27: cpu@30203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu28: cpu@30300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu29: cpu@30301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu30: cpu@30302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu31: cpu@30303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu32: cpu@50000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu33: cpu@50001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu34: cpu@50002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu35: cpu@50003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu36: cpu@50100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu37: cpu@50101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu38: cpu@50102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu39: cpu@50103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu40: cpu@50200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu41: cpu@50201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu42: cpu@50202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu43: cpu@50203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu44: cpu@50300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu45: cpu@50301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu46: cpu@50302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu47: cpu@50303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu48: cpu@70000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu49: cpu@70001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu50: cpu@70002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu51: cpu@70003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu52: cpu@70100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu53: cpu@70101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu54: cpu@70102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu55: cpu@70103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu56: cpu@70200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu57: cpu@70201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu58: cpu@70202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu59: cpu@70203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu60: cpu@70300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu61: cpu@70301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu62: cpu@70302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu63: cpu@70303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster4_l2: l2-cache4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster5_l2: l2-cache5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster6_l2: l2-cache6 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster7_l2: l2-cache7 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster8_l2: l2-cache8 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster9_l2: l2-cache9 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster10_l2: l2-cache10 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster11_l2: l2-cache11 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster12_l2: l2-cache12 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster13_l2: l2-cache13 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster14_l2: l2-cache14 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster15_l2: l2-cache15 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@4d000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <4>;
+		redistributor-stride = <0x0 0x40000>;
+		reg = <0x0 0x4d000000 0x0 0x10000>,	/* GICD */
+		      <0x0 0x4d100000 0x0 0x400000>,	/* p0 GICR node 0 */
+		      <0x0 0x6d100000 0x0 0x400000>,	/* p0 GICR node 1 */
+		      <0x400 0x4d100000 0x0 0x400000>,	/* p1 GICR node 2 */
+		      <0x400 0x6d100000 0x0 0x400000>,	/* p1 GICR node 3 */
+		      <0x0 0xfe000000 0x0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0x0 0x10000>,	/* GICH */
+		      <0x0 0xfe020000 0x0 0x10000>;	/* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		p0_its_peri_a: msi-controller@4c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0x4c000000 0x0 0x40000>;
+		};
+
+		p0_its_peri_b: msi-controller@6c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0x6c000000 0x0 0x40000>;
+		};
+
+		p0_its_dsa_a: msi-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+
+		p0_its_dsa_b: msi-controller@8c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x8 0xc6000000 0x0 0x40000>;
+		};
+
+		p1_its_peri_a: msi-controller@4004c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x400 0x4c000000 0x0 0x40000>;
+		};
+
+		p1_its_peri_b: msi-controller@4006c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x400 0x6c000000 0x0 0x40000>;
+		};
+
+		p1_its_dsa_a: msi-controller@400c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x400 0xc6000000 0x0 0x40000>;
+		};
+
+		p1_its_dsa_b: msi-controller@408c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x408 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	p0_mbigen_peri_b: interrupt-controller@60080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0x60080000 0x0 0x10000>;
+
+		mbigen_uart: uart_intc {
+			msi-parent = <&p0_its_peri_b 0x120c7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <1>;
+		};
+	};
+
+	p0_mbigen_pcie_a: interrupt-controller@a0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xa0080000 0x0 0x10000>;
+
+		mbigen_pcie2_a: intc_pcie2_a {
+			msi-parent = <&p0_its_dsa_a 0x40087>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <10>;
+		};
+
+		mbigen_sas1: intc_sas1 {
+			msi-parent = <&p0_its_dsa_a 0x40000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_sas2: intc_sas2 {
+			msi-parent = <&p0_its_dsa_a 0x40040>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_smmu_pcie: intc_smmu_pcie {
+			msi-parent = <&p0_its_dsa_a 0x40b0c>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+
+		mbigen_usb: intc_usb {
+			msi-parent = <&p0_its_dsa_a 0x40080>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <2>;
+		};
+	};
+	p0_mbigen_alg_a:interrupt-controller@d0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xd0080000 0x0 0x10000>;
+
+		p0_mbigen_sec_a: intc_sec {
+			msi-parent = <&p0_its_dsa_a 0x40400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <33>;
+		};
+		p0_mbigen_smmu_alg_a: intc_smmu_alg {
+			msi-parent = <&p0_its_dsa_a 0x40b1b>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+	p0_mbigen_alg_b:interrupt-controller@8,d0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x8 0xd0080000 0x0 0x10000>;
+
+		p0_mbigen_sec_b: intc_sec {
+			msi-parent = <&p0_its_dsa_b 0x42400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <33>;
+		};
+		p0_mbigen_smmu_alg_b: intc_smmu_alg {
+			msi-parent = <&p0_its_dsa_b 0x42b1b>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+	p1_mbigen_alg_a:interrupt-controller@400,d0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x400 0xd0080000 0x0 0x10000>;
+
+		p1_mbigen_sec_a: intc_sec {
+			msi-parent = <&p1_its_dsa_a 0x44400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <33>;
+		};
+		p1_mbigen_smmu_alg_a: intc_smmu_alg {
+			msi-parent = <&p1_its_dsa_a 0x44b1b>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+	p1_mbigen_alg_b:interrupt-controller@408,d0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x408 0xd0080000 0x0 0x10000>;
+
+		p1_mbigen_sec_b: intc_sec {
+			msi-parent = <&p1_its_dsa_b 0x46400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <33>;
+		};
+		p1_mbigen_smmu_alg_b: intc_smmu_alg {
+			msi-parent = <&p1_its_dsa_b 0x46b1b>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+	p0_mbigen_dsa_a: interrupt-controller@c0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xc0080000 0x0 0x10000>;
+
+		mbigen_dsaf0: intc_dsaf0 {
+			msi-parent = <&p0_its_dsa_a 0x40800>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <409>;
+		};
+
+		mbigen_dsa_roce: intc-roce {
+			msi-parent = <&p0_its_dsa_a 0x40B1E>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <34>;
+		};
+
+		mbigen_sas0: intc-sas0 {
+			msi-parent = <&p0_its_dsa_a 0x40900>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_smmu_dsa: intc_smmu_dsa {
+			msi-parent = <&p0_its_dsa_a 0x40b20>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+
+	/**
+	 *  HiSilicon erratum 161010801: This describes the limitation
+	 *  of HiSilicon platforms hip06/hip07 to support the SMMUv3
+	 *  mappings for PCIe MSI transactions.
+	 *  PCIe controller on these platforms has to differentiate the
+	 *  MSI payload against other DMA payload and has to modify the
+	 *  MSI payload. This makes it difficult for these platforms to
+	 *  have a SMMU translation for MSI. In order to workaround this,
+	 *  ARM SMMUv3 driver requires a quirk to treat the MSI regions
+	 *  separately. Such a quirk is currently missing for DT based
+	 *  systems. Hence please make sure that the smmu pcie node on
+	 *  hip07 is disabled as this will break the PCIe functionality
+	 *  when iommu-map entry is used along with the PCIe node.
+	 *  Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html
+	 */
+	smmu0: iommu@a0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0xa0040000 0x0 0x20000>;
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+		status = "disabled";
+	};
+	p0_smmu_alg_a: iommu@d0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0xd0040000 0x0 0x20000>;
+		interrupt-parent = <&p0_mbigen_smmu_alg_a>;
+		interrupts = <733 1>,
+		<734 1>,
+		<735 1>;
+		interrupt-names = "eventq", "gerror", "priq";
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+	};
+	p0_smmu_alg_b: iommu@8d0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x8 0xd0040000 0x0 0x20000>;
+		interrupt-parent = <&p0_mbigen_smmu_alg_b>;
+		interrupts = <733 1>,
+		<734 1>,
+		<735 1>;
+		interrupt-names = "eventq", "gerror", "priq";
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+	};
+	p1_smmu_alg_a: iommu@400d0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x400 0xd0040000 0x0 0x20000>;
+		interrupt-parent = <&p1_mbigen_smmu_alg_a>;
+		interrupts = <733 1>,
+		<734 1>,
+		<735 1>;
+		interrupt-names = "eventq", "gerror", "priq";
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+	};
+	p1_smmu_alg_b: iommu@408d0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x408 0xd0040000 0x0 0x20000>;
+		interrupt-parent = <&p1_mbigen_smmu_alg_b>;
+		interrupts = <733 1>,
+		<734 1>,
+		<735 1>;
+		interrupt-names = "eventq", "gerror", "priq";
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		isa@a01b0000 {
+			compatible = "hisilicon,hip07-lpc";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			reg = <0x0 0xa01b0000 0x0 0x1000>;
+
+			ipmi0: bt@e4 {
+				compatible = "ipmi-bt";
+				device_type = "ipmi";
+				reg = <0x01 0xe4 0x04>;
+				status = "disabled";
+			};
+		};
+
+		uart0: serial@602b0000 {
+			compatible = "arm,sbsa-uart";
+			reg = <0x0 0x602b0000 0x0 0x1000>;
+			interrupt-parent = <&mbigen_uart>;
+			interrupts = <807 4>;
+			current-speed = <115200>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		usb_ohci: usb@a7030000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0xa7030000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <640 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb_ehci: usb@a7020000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0xa7020000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <641 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		peri_c_subctrl: sub_ctrl_c@60000000 {
+			compatible = "hisilicon,peri-subctrl","syscon";
+			reg = <0 0x60000000 0x0 0x10000>;
+		};
+
+		dsa_subctrl: dsa_subctrl@c0000000 {
+			compatible = "hisilicon,dsa-subctrl", "syscon";
+			reg = <0x0 0xc0000000 0x0 0x10000>;
+		};
+
+		dsa_cpld: dsa_cpld@78000010 {
+			compatible = "syscon";
+			reg = <0x0 0x78000010 0x0 0x100>;
+			reg-io-width = <2>;
+		};
+
+		pcie_subctl: pcie_subctl@a0000000 {
+			compatible = "hisilicon,pcie-sas-subctrl", "syscon";
+			reg = <0x0 0xa0000000 0x0 0x10000>;
+		};
+
+		serdes_ctrl: sds_ctrl@c2200000 {
+			compatible = "syscon";
+			reg = <0 0xc2200000 0x0 0x80000>;
+		};
+
+		mdio@603c0000 {
+			compatible = "hisilicon,hns-mdio";
+			reg = <0x0 0x603c0000 0x0 0x1000>;
+			subctrl-vbase = <&peri_c_subctrl 0x338 0xa38
+					 0x531c 0x5a1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+			};
+		};
+
+		dsaf0: dsa@c7000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "hisilicon,hns-dsaf-v2";
+			mode = "6port-16rss";
+			reg = <0x0 0xc5000000 0x0 0x890000>,
+			      <0x0 0xc7000000 0x0 0x600000>;
+			reg-names = "ppe-base", "dsaf-base";
+			interrupt-parent = <&mbigen_dsaf0>;
+			subctrl-syscon = <&dsa_subctrl>;
+			reset-field-offset = <0>;
+			interrupts =
+			<576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
+			<581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
+			<586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
+			<591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
+			<596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
+			<960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
+			<965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
+			<970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
+			<975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
+			<980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
+			<985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
+			<990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
+			<995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
+			<1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
+			<1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
+			<1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
+			<1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
+			<1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
+			<1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
+			<1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
+			<1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
+			<1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
+			<1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
+			<1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
+			<1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
+			<1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
+			<1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
+			<1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
+			<1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
+			<1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
+			<1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
+			<1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
+			<1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
+			<1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
+			<1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
+			<1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
+			<1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
+			<1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
+			<1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
+			<1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
+			<1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
+			<1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
+			<1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
+			<1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
+			<1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
+			<1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
+			<1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
+			<1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
+			<1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
+			<1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
+			<1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
+			<1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
+			<1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
+			<1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
+			<1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
+			<1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
+			<1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
+			<1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
+			<1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
+			<1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
+			<1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
+			<1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
+			<1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
+			<1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
+			<1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
+			<1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
+			<1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
+			<1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
+			<1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
+			<1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
+			<1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
+			<1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
+			<1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
+			<1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
+			<1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
+			<1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
+			<1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
+			<1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
+			<1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
+			<1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
+			<1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
+			<1340 1>, <1341 1>, <1342 1>, <1343 1>;
+
+			desc-num = <0x400>;
+			buf-size = <0x1000>;
+			dma-coherent;
+
+			port@0 {
+				reg = <0>;
+				serdes-syscon = <&serdes_ctrl>;
+				cpld-syscon = <&dsa_cpld 0x0>;
+				port-rst-offset = <0>;
+				port-mode-offset = <0>;
+				mc-mac-mask = [ff f0 00 00 00 00];
+				media-type = "fiber";
+			};
+
+			port@1 {
+				reg = <1>;
+				serdes-syscon = <&serdes_ctrl>;
+				cpld-syscon = <&dsa_cpld 0x4>;
+				port-rst-offset = <1>;
+				port-mode-offset = <1>;
+				mc-mac-mask = [ff f0 00 00 00 00];
+				media-type = "fiber";
+			};
+
+			port@4 {
+				reg = <4>;
+				phy-handle = <&phy0>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <4>;
+				port-mode-offset = <2>;
+				mc-mac-mask = [ff f0 00 00 00 00];
+				media-type = "copper";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-handle = <&phy1>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <5>;
+				port-mode-offset = <3>;
+				mc-mac-mask = [ff f0 00 00 00 00];
+				media-type = "copper";
+			};
+		};
+
+		eth0: ethernet@4 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <4>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth1: ethernet@5 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <5>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth2: ethernet@0 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <0>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth3: ethernet@1 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		infiniband@c4000000 {
+			compatible = "hisilicon,hns-roce-v1";
+			reg = <0x0 0xc4000000 0x0 0x100000>;
+			dma-coherent;
+			eth-handle = <&eth2 &eth3 0 0 &eth0 &eth1>;
+			dsaf-handle = <&dsaf0>;
+			node-guid = [00 9A CD 00 00 01 02 03];
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&mbigen_dsa_roce>;
+			interrupts = <722 1>,
+				     <723 1>,
+				     <724 1>,
+				     <725 1>,
+				     <726 1>,
+				     <727 1>,
+				     <728 1>,
+				     <729 1>,
+				     <730 1>,
+				     <731 1>,
+				     <732 1>,
+				     <733 1>,
+				     <734 1>,
+				     <735 1>,
+				     <736 1>,
+				     <737 1>,
+				     <738 1>,
+				     <739 1>,
+				     <740 1>,
+				     <741 1>,
+				     <742 1>,
+				     <743 1>,
+				     <744 1>,
+				     <745 1>,
+				     <746 1>,
+				     <747 1>,
+				     <748 1>,
+				     <749 1>,
+				     <750 1>,
+				     <751 1>,
+				     <752 1>,
+				     <753 1>,
+				     <785 1>,
+				     <754 4>;
+
+			interrupt-names = "hns-roce-comp-0",
+					  "hns-roce-comp-1",
+					  "hns-roce-comp-2",
+					  "hns-roce-comp-3",
+					  "hns-roce-comp-4",
+					  "hns-roce-comp-5",
+					  "hns-roce-comp-6",
+					  "hns-roce-comp-7",
+					  "hns-roce-comp-8",
+					  "hns-roce-comp-9",
+					  "hns-roce-comp-10",
+					  "hns-roce-comp-11",
+					  "hns-roce-comp-12",
+					  "hns-roce-comp-13",
+					  "hns-roce-comp-14",
+					  "hns-roce-comp-15",
+					  "hns-roce-comp-16",
+					  "hns-roce-comp-17",
+					  "hns-roce-comp-18",
+					  "hns-roce-comp-19",
+					  "hns-roce-comp-20",
+					  "hns-roce-comp-21",
+					  "hns-roce-comp-22",
+					  "hns-roce-comp-23",
+					  "hns-roce-comp-24",
+					  "hns-roce-comp-25",
+					  "hns-roce-comp-26",
+					  "hns-roce-comp-27",
+					  "hns-roce-comp-28",
+					  "hns-roce-comp-29",
+					  "hns-roce-comp-30",
+					  "hns-roce-comp-31",
+					  "hns-roce-async",
+					  "hns-roce-common";
+		};
+
+		sas0: sas@c3000000 {
+			compatible = "hisilicon,hip07-sas-v2";
+			reg = <0 0xc3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&dsa_subctrl>;
+			ctrl-reset-reg = <0xa60>;
+			ctrl-reset-sts-reg = <0x5a30>;
+			ctrl-clock-ena-reg = <0x338>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas0>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+				     <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+				     <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+				     <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+				     <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+				     <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+				     <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+				     <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+				     <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+				     <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+				     <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+				     <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+				     <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+				     <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+				     <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+				     <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+				     <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+				     <159 4>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>,<608 1>,<609 1>,
+				     <610 1>,<611 1>,<612 1>,<613 1>,<614 1>,
+				     <615 1>,<616 1>,<617 1>,<618 1>,<619 1>,
+				     <620 1>,<621 1>,<622 1>,<623 1>,<624 1>,
+				     <625 1>,<626 1>,<627 1>,<628 1>,<629 1>,
+				     <630 1>,<631 1>,<632 1>;
+			status = "disabled";
+		};
+
+		sas1: sas@a2000000 {
+			compatible = "hisilicon,hip07-sas-v2";
+			reg = <0 0xa2000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			hip06-sas-v2-quirk-amt;
+			ctrl-reset-reg = <0xa18>;
+			ctrl-reset-sts-reg = <0x5a0c>;
+			ctrl-clock-ena-reg = <0x318>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas1>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+				     <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+				     <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+				     <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+				     <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+				     <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+				     <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+				     <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+				     <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+				     <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+				     <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+				     <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+				     <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+				     <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+				     <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+				     <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+				     <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+				     <159 4>,<576 1>,<577 1>,<578 1>,<579 1>,
+				     <580 1>,<581 1>,<582 1>,<583 1>,<584 1>,
+				     <585 1>,<586 1>,<587 1>,<588 1>,<589 1>,
+				     <590 1>,<591 1>,<592 1>,<593 1>,<594 1>,
+				     <595 1>,<596 1>,<597 1>,<598 1>,<599 1>,
+				     <600 1>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>;
+			status = "disabled";
+		};
+
+		sas2: sas@a3000000 {
+			compatible = "hisilicon,hip07-sas-v2";
+			reg = <0 0xa3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			ctrl-reset-reg = <0xae0>;
+			ctrl-reset-sts-reg = <0x5a70>;
+			ctrl-clock-ena-reg = <0x3a8>;
+			queue-count = <16>;
+			phy-count = <9>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas2>;
+			interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>,
+				     <197 4>,<198 4>,<199 4>,<200 4>,<201 4>,
+				     <202 4>,<203 4>,<204 4>,<205 4>,<206 4>,
+				     <207 4>,<208 4>,<209 4>,<210 4>,<211 4>,
+				     <212 4>,<213 4>,<214 4>,<215 4>,<216 4>,
+				     <217 4>,<218 4>,<219 4>,<220 4>,<221 4>,
+				     <222 4>,<223 4>,<224 4>,<225 4>,<226 4>,
+				     <227 4>,<228 4>,<229 4>,<230 4>,<231 4>,
+				     <232 4>,<233 4>,<234 4>,<235 4>,<236 4>,
+				     <237 4>,<238 4>,<239 4>,<240 4>,<241 4>,
+				     <242 4>,<243 4>,<244 4>,<245 4>,<246 4>,
+				     <247 4>,<248 4>,<249 4>,<250 4>,<251 4>,
+				     <252 4>,<253 4>,<254 4>,<255 4>,<256 4>,
+				     <257 4>,<258 4>,<259 4>,<260 4>,<261 4>,
+				     <262 4>,<263 4>,<264 4>,<265 4>,<266 4>,
+				     <267 4>,<268 4>,<269 4>,<270 4>,<271 4>,
+				     <272 4>,<273 4>,<274 4>,<275 4>,<276 4>,
+				     <277 4>,<278 4>,<279 4>,<280 4>,<281 4>,
+				     <282 4>,<283 4>,<284 4>,<285 4>,<286 4>,
+				     <287 4>,<608 1>,<609 1>,<610 1>,<611 1>,
+				     <612 1>,<613 1>,<614 1>,<615 1>,<616 1>,
+				     <617 1>,<618 1>,<619 1>,<620 1>,<621 1>,
+				     <622 1>,<623 1>,<624 1>,<625 1>,<626 1>,
+				     <627 1>,<628 1>,<629 1>,<630 1>,<631 1>,
+				     <632 1>,<633 1>,<634 1>,<635 1>,<636 1>,
+				     <637 1>,<638 1>,<639 1>;
+			status = "disabled";
+		};
+
+		p0_pcie2_a: pcie@a00a0000 {
+			compatible = "hisilicon,hip07-pcie-ecam";
+			reg = <0 0xaf800000 0 0x800000>,
+			      <0 0xa00a0000 0 0x10000>;
+			bus-range = <0xf8 0xff>;
+			msi-map = <0xf800 &p0_its_dsa_a 0xf800 0x800>;
+			msi-map-mask = <0xffff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000>,
+				 <0x01000000 0 0 0 0xaf7f0000 0 0x10000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4
+					 0x0 0 0 2 &mbigen_pcie2_a 671 4
+					 0x0 0 0 3 &mbigen_pcie2_a 671 4
+					 0x0 0 0 4 &mbigen_pcie2_a 671 4>;
+			status = "disabled";
+		};
+		p0_sec_a: crypto@d2000000 {
+			compatible = "hisilicon,hip07-sec";
+			reg = <0x0 0xd0000000 0x0 0x10000>,
+			      <0x0 0xd2000000 0x0 0x10000>,
+			      <0x0 0xd2010000 0x0 0x10000>,
+			      <0x0 0xd2020000 0x0 0x10000>,
+			      <0x0 0xd2030000 0x0 0x10000>,
+			      <0x0 0xd2040000 0x0 0x10000>,
+			      <0x0 0xd2050000 0x0 0x10000>,
+			      <0x0 0xd2060000 0x0 0x10000>,
+			      <0x0 0xd2070000 0x0 0x10000>,
+			      <0x0 0xd2080000 0x0 0x10000>,
+			      <0x0 0xd2090000 0x0 0x10000>,
+			      <0x0 0xd20a0000 0x0 0x10000>,
+			      <0x0 0xd20b0000 0x0 0x10000>,
+			      <0x0 0xd20c0000 0x0 0x10000>,
+			      <0x0 0xd20d0000 0x0 0x10000>,
+			      <0x0 0xd20e0000 0x0 0x10000>,
+			      <0x0 0xd20f0000 0x0 0x10000>,
+			      <0x0 0xd2100000 0x0 0x10000>;
+			interrupt-parent = <&p0_mbigen_sec_a>;
+			iommus = <&p0_smmu_alg_a 0x600>;
+			dma-coherent;
+			interrupts = <576 4>,
+				     <577 1>, <578 4>,
+				     <579 1>, <580 4>,
+				     <581 1>, <582 4>,
+				     <583 1>, <584 4>,
+				     <585 1>, <586 4>,
+				     <587 1>, <588 4>,
+				     <589 1>, <590 4>,
+				     <591 1>, <592 4>,
+				     <593 1>, <594 4>,
+				     <595 1>, <596 4>,
+				     <597 1>, <598 4>,
+				     <599 1>, <600 4>,
+				     <601 1>, <602 4>,
+				     <603 1>, <604 4>,
+				     <605 1>, <606 4>,
+				     <607 1>, <608 4>;
+		};
+		p0_sec_b: crypto@8,d2000000 {
+			compatible = "hisilicon,hip07-sec";
+			reg = <0x8 0xd0000000 0x0 0x10000>,
+			      <0x8 0xd2000000 0x0 0x10000>,
+			      <0x8 0xd2010000 0x0 0x10000>,
+			      <0x8 0xd2020000 0x0 0x10000>,
+			      <0x8 0xd2030000 0x0 0x10000>,
+			      <0x8 0xd2040000 0x0 0x10000>,
+			      <0x8 0xd2050000 0x0 0x10000>,
+			      <0x8 0xd2060000 0x0 0x10000>,
+			      <0x8 0xd2070000 0x0 0x10000>,
+			      <0x8 0xd2080000 0x0 0x10000>,
+			      <0x8 0xd2090000 0x0 0x10000>,
+			      <0x8 0xd20a0000 0x0 0x10000>,
+			      <0x8 0xd20b0000 0x0 0x10000>,
+			      <0x8 0xd20c0000 0x0 0x10000>,
+			      <0x8 0xd20d0000 0x0 0x10000>,
+			      <0x8 0xd20e0000 0x0 0x10000>,
+			      <0x8 0xd20f0000 0x0 0x10000>,
+			      <0x8 0xd2100000 0x0 0x10000>;
+			interrupt-parent = <&p0_mbigen_sec_b>;
+			iommus = <&p0_smmu_alg_b 0x600>;
+			dma-coherent;
+			interrupts = <576 4>,
+				     <577 1>, <578 4>,
+				     <579 1>, <580 4>,
+				     <581 1>, <582 4>,
+				     <583 1>, <584 4>,
+				     <585 1>, <586 4>,
+				     <587 1>, <588 4>,
+				     <589 1>, <590 4>,
+				     <591 1>, <592 4>,
+				     <593 1>, <594 4>,
+				     <595 1>, <596 4>,
+				     <597 1>, <598 4>,
+				     <599 1>, <600 4>,
+				     <601 1>, <602 4>,
+				     <603 1>, <604 4>,
+				     <605 1>, <606 4>,
+				     <607 1>, <608 4>;
+		};
+		p1_sec_a: crypto@400,d2000000 {
+			compatible = "hisilicon,hip07-sec";
+			reg = <0x400 0xd0000000 0x0 0x10000>,
+			      <0x400 0xd2000000 0x0 0x10000>,
+			      <0x400 0xd2010000 0x0 0x10000>,
+			      <0x400 0xd2020000 0x0 0x10000>,
+			      <0x400 0xd2030000 0x0 0x10000>,
+			      <0x400 0xd2040000 0x0 0x10000>,
+			      <0x400 0xd2050000 0x0 0x10000>,
+			      <0x400 0xd2060000 0x0 0x10000>,
+			      <0x400 0xd2070000 0x0 0x10000>,
+			      <0x400 0xd2080000 0x0 0x10000>,
+			      <0x400 0xd2090000 0x0 0x10000>,
+			      <0x400 0xd20a0000 0x0 0x10000>,
+			      <0x400 0xd20b0000 0x0 0x10000>,
+			      <0x400 0xd20c0000 0x0 0x10000>,
+			      <0x400 0xd20d0000 0x0 0x10000>,
+			      <0x400 0xd20e0000 0x0 0x10000>,
+			      <0x400 0xd20f0000 0x0 0x10000>,
+			      <0x400 0xd2100000 0x0 0x10000>;
+			interrupt-parent = <&p1_mbigen_sec_a>;
+			iommus = <&p1_smmu_alg_a 0x600>;
+			dma-coherent;
+			interrupts = <576 4>,
+				     <577 1>, <578 4>,
+				     <579 1>, <580 4>,
+				     <581 1>, <582 4>,
+				     <583 1>, <584 4>,
+				     <585 1>, <586 4>,
+				     <587 1>, <588 4>,
+				     <589 1>, <590 4>,
+				     <591 1>, <592 4>,
+				     <593 1>, <594 4>,
+				     <595 1>, <596 4>,
+				     <597 1>, <598 4>,
+				     <599 1>, <600 4>,
+				     <601 1>, <602 4>,
+				     <603 1>, <604 4>,
+				     <605 1>, <606 4>,
+				     <607 1>, <608 4>;
+		};
+		p1_sec_b: crypto@408,d2000000 {
+			compatible = "hisilicon,hip07-sec";
+			reg = <0x408 0xd0000000 0x0 0x10000>,
+			      <0x408 0xd2000000 0x0 0x10000>,
+			      <0x408 0xd2010000 0x0 0x10000>,
+			      <0x408 0xd2020000 0x0 0x10000>,
+			      <0x408 0xd2030000 0x0 0x10000>,
+			      <0x408 0xd2040000 0x0 0x10000>,
+			      <0x408 0xd2050000 0x0 0x10000>,
+			      <0x408 0xd2060000 0x0 0x10000>,
+			      <0x408 0xd2070000 0x0 0x10000>,
+			      <0x408 0xd2080000 0x0 0x10000>,
+			      <0x408 0xd2090000 0x0 0x10000>,
+			      <0x408 0xd20a0000 0x0 0x10000>,
+			      <0x408 0xd20b0000 0x0 0x10000>,
+			      <0x408 0xd20c0000 0x0 0x10000>,
+			      <0x408 0xd20d0000 0x0 0x10000>,
+			      <0x408 0xd20e0000 0x0 0x10000>,
+			      <0x408 0xd20f0000 0x0 0x10000>,
+			      <0x408 0xd2100000 0x0 0x10000>;
+			interrupt-parent = <&p1_mbigen_sec_b>;
+			iommus = <&p1_smmu_alg_b 0x600>;
+			dma-coherent;
+			interrupts = <576 4>,
+				     <577 1>, <578 4>,
+				     <579 1>, <580 4>,
+				     <581 1>, <582 4>,
+				     <583 1>, <584 4>,
+				     <585 1>, <586 4>,
+				     <587 1>, <588 4>,
+				     <589 1>, <590 4>,
+				     <591 1>, <592 4>,
+				     <593 1>, <594 4>,
+				     <595 1>, <596 4>,
+				     <597 1>, <598 4>,
+				     <599 1>, <600 4>,
+				     <601 1>, <602 4>,
+				     <603 1>, <604 4>,
+				     <605 1>, <606 4>,
+				     <607 1>, <608 4>;
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi
new file mode 100644
index 0000000000..7bb19e4b08
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl dts file for HiSilicon Poplar board
+ *
+ * Copyright (c) 2016-2018 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/* value, enable bits, disable bits, mask */
+#define PINCTRL_PULLDOWN(value, enable, disable, mask) \
+	(value << 13) (enable << 13) (disable << 13) (mask << 13)
+#define PINCTRL_PULLUP(value, enable, disable, mask) \
+	(value << 12) (enable << 12) (disable << 12) (mask << 12)
+#define PINCTRL_SLEW_RATE(value, mask)	  (value << 8) (mask << 8)
+#define PINCTRL_DRV_STRENGTH(value, mask) (value << 4) (mask << 4)
+
+&pmx0 {
+	emmc_pins_1: emmc-pins-1 {
+		pinctrl-single,pins = <
+			0x000 MUX_M2
+			0x004 MUX_M2
+			0x008 MUX_M2
+			0x00c MUX_M2
+			0x010 MUX_M2
+			0x014 MUX_M2
+			0x018 MUX_M2
+			0x01c MUX_M2
+			0x024 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(0xb, 0xf)
+		>;
+	};
+
+	emmc_pins_2: emmc-pins-2 {
+		pinctrl-single,pins = <
+			0x028 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(0x9, 0xf)
+		>;
+	};
+
+	emmc_pins_3: emmc-pins-3 {
+		pinctrl-single,pins = <
+			0x02c MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(3, 3)
+		>;
+	};
+
+	emmc_pins_4: emmc-pins-4 {
+		pinctrl-single,pins = <
+			0x030 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(1, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(3, 3)
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
new file mode 100644
index 0000000000..d39cfb723f
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
+				socfpga_agilex_socdk.dtb \
+				socfpga_agilex_socdk_nand.dtb \
+				socfpga_agilex5_socdk.dtb \
+				socfpga_n5x_socdk.dtb
+dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/keembay-evm.dts b/arch/arm64/boot/dts/intel/keembay-evm.dts
new file mode 100644
index 0000000000..466c85363a
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-evm.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation
+ *
+ * Device tree describing Keem Bay EVM board.
+ */
+
+/dts-v1/;
+
+#include "keembay-soc.dtsi"
+
+/ {
+	model = "Keem Bay EVM";
+	compatible = "intel,keembay-evm", "intel,keembay";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2GB of DDR memory. */
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
new file mode 100644
index 0000000000..781761d294
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation.
+ *
+ * Device tree describing Keem Bay SoC.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@20500000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x0 0x20500000 0x0 0x20000>,	/* GICD */
+		      <0x0 0x20580000 0x0 0x80000>;	/* GICR */
+		/* VGIC maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Secure, non-secure, virtual, and hypervisor */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@20150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20150000 0x0 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@20160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20160000 0x0 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@20170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20170000 0x0 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@20180000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20180000 0x0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
new file mode 100644
index 0000000000..d3adb6a130
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -0,0 +1,675 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/agilex-clock.h>
+
+/ {
+	compatible = "intel,socfpga-agilex";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		service_reserved: svcbuffer@0 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x0 0x0 0x2000000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+		interrupt-parent = <&intc>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	intc: interrupt-controller@fffc1000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0xfffc1000 0x0 0x1000>,
+		      <0x0 0xfffc2000 0x0 0x2000>,
+		      <0x0 0xfffc4000 0x0 0x2000>,
+		      <0x0 0xfffc6000 0x0 0x2000>;
+	};
+
+	clocks {
+		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		cb_intosc_ls_clk: cb-intosc-ls-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		f2s_free_clk: f2s-free-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		osc1: osc1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		qspi_clk: qspi-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	usbphy0: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges = <0 0 0 0xffffffff>;
+
+		base_fpga_region {
+			#address-cells = <0x2>;
+			#size-cells = <0x2>;
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+
+		clkmgr: clock-controller@ffd10000 {
+			compatible = "intel,agilex-clkmgr";
+			reg = <0xffd10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff800000 0x2000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 1>;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			clocks = <&clkmgr AGILEX_EMAC0_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff802000 0x2000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 2>;
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+			clocks = <&clkmgr AGILEX_EMAC1_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff804000 0x2000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 3>;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+			clocks = <&clkmgr AGILEX_EMAC2_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc03200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03200 0x100>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@ffc03300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03300 0x100>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c0: i2c@ffc02800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02800 0x100>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02900 0x100>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02a00 0x100>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02b00 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02c00 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		mmc: mmc@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <0x400>;
+			resets = <&rst SDMMC_RESET>;
+			reset-names = "reset";
+			clocks = <&clkmgr AGILEX_L4_MP_CLK>,
+				 <&clkmgr AGILEX_SDMMC_CLK>;
+			clock-names = "biu", "ciu";
+			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
+			status = "disabled";
+		};
+
+		nand: nand-controller@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x10000>,
+			      <0xffb80000 0x1000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX_NAND_CLK>,
+				 <&clkmgr AGILEX_NAND_X_CLK>,
+				 <&clkmgr AGILEX_NAND_ECC_CLK>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xffe00000 0x40000>;
+		};
+
+		pdma: dma-controller@ffda0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xffda0000 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+			reset-names = "dma", "dma-ocp";
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			clock-names = "apb_pclk";
+		};
+
+		pinctrl0: pinctrl@ffd13000 {
+			compatible = "pinctrl-single";
+			#pinctrl-cells = <1>;
+			reg = <0xffd13000 0xa0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+		};
+
+		pinctrl1: pinconf@ffd13100 {
+			compatible = "pinctrl-single";
+			#pinctrl-cells = <1>;
+			reg = <0xffd13100 0x20>;
+			pinctrl-single,register-width = <32>;
+		};
+
+		rst: rstmgr@ffd11000 {
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
+			reg = <0xffd11000 0x100>;
+			#reset-cells = <1>;
+		};
+
+		smmu: iommu@fa000000 {
+			compatible = "arm,mmu-500", "arm,smmu-v2";
+			reg = <0xfa000000 0x40000>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&intc>;
+			/* Global Secure Fault */
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				/* Global Non-secure Fault */
+				<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				/* Non-secure Context Interrupts (32) */
+				<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7ff0>;
+			clocks = <&clkmgr AGILEX_MPU_CCU_CLK>,
+				 <&clkmgr AGILEX_L3_MAIN_FREE_CLK>,
+				 <&clkmgr AGILEX_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd12000 {
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
+			reg = <0xffd12000 0x500>;
+		};
+
+		timer0: timer0@ffc03000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc03000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1@ffc03100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc03100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		uart0: serial@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART0_RESET>;
+			status = "disabled";
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+		};
+
+		uart1: serial@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
+			reg = <0xffb00000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr AGILEX_USB_CLK>;
+			clock-names = "otg";
+			iommus = <&smmu 6>;
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
+			reg = <0xffb40000 0x40000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			iommus = <&smmu 7>;
+			clocks = <&clkmgr AGILEX_USB_CLK>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@ffd00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00400 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@ffd00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00500 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		sdr: sdr@f8011100 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xf8011100 0xc0>;
+		};
+
+		eccmgr {
+			compatible = "altr,socfpga-s10-ecc-manager",
+				     "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-s10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ocram-ecc@ff8cc000 {
+				compatible = "altr,socfpga-s10-ocram-ecc",
+					     "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8cc000 0x100>;
+				altr,ecc-parent = <&ocram>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc@ff8c4000 {
+				compatible = "altr,socfpga-s10-usb-ecc",
+					     "altr,socfpga-usb-ecc";
+				reg = <0xff8c4000 0x100>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-rx-ecc@ff8c0000 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0000 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0400 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0400 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qspi: spi@ff8d2000 {
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff8d2000 0x100>,
+			      <0xff900000 0x100000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+
+			status = "disabled";
+		};
+
+		firmware {
+			svc {
+				compatible = "intel,agilex-svc";
+				method = "smc";
+				memory-region = <&service_reserved>;
+
+				fpga_mgr: fpga-mgr {
+					compatible = "intel,agilex-soc-fpga-mgr";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
new file mode 100644
index 0000000000..dcdaf70649
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023, Intel Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/intel,agilex5-clkmgr.h>
+
+/ {
+	compatible = "intel,socfpga-agilex5";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		service_reserved: svcbuffer@0 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x2000000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	intc: interrupt-controller@1d000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x1d000000 0 0x10000>,
+			<0x0 0x1d060000 0 0x100000>;
+		ranges;
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells =<2>;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		redistributor-stride = <0x0 0x20000>;
+
+		its: msi-controller@1d040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0x1d040000 0x0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	/* Clock tree 5 main sources*/
+	clocks {
+		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cb_intosc_ls_clk: cb-intosc-ls-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		f2s_free_clk: f2s-free-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc1: osc1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		qspi_clk: qspi-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	usbphy0: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+
+		clkmgr: clock-controller@10d10000 {
+			compatible = "intel,agilex5-clkmgr";
+			reg = <0x10d10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c0: i2c@10c02800 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10c02900 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02900 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10c02a00 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02a00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@10c02b00 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02b00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@10c02c00 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02c00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i3c0: i3c-master@10da0000 {
+			compatible = "snps,dw-i3c-master-1.00a";
+			reg = <0x10da0000 0x1000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
+			status = "disabled";
+		};
+
+		i3c1: i3c-master@10da1000 {
+			compatible = "snps,dw-i3c-master-1.00a";
+			reg = <0x10da1000 0x1000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@10c03300 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x10c03300 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		nand: nand-controller@10b80000 {
+			compatible = "cdns,hp-nfc";
+			reg = <0x10b80000 0x10000>,
+					<0x10840000 0x10000>;
+			reg-names = "reg", "sdma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_NAND_NF_CLK>;
+			cdns,board-delay-ps = <4830>;
+			status = "disabled";
+		};
+
+		ocram: sram@0 {
+			compatible = "mmio-sram";
+			reg = <0x00000000 0x80000>;
+			ranges = <0 0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		dmac0: dma-controller@10db0000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x10db0000 0x500>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>,
+				 <&clkmgr AGILEX5_L4_MP_CLK>;
+			clock-names = "core-clk", "cfgr-clk";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			snps,dma-masters = <1>;
+			snps,data-width = <2>;
+			snps,block-size = <32767 32767 32767 32767>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <8>;
+		};
+
+		dmac1: dma-controller@10dc0000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x10dc0000 0x500>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>,
+				 <&clkmgr AGILEX5_L4_MP_CLK>;
+			clock-names = "core-clk", "cfgr-clk";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			snps,dma-masters = <1>;
+			snps,data-width = <2>;
+			snps,block-size = <32767 32767 32767 32767>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <8>;
+		};
+
+		rst: rstmgr@10d11000 {
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
+			reg = <0x10d11000 0x1000>;
+			#reset-cells = <1>;
+		};
+
+		spi0: spi@10da4000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x10da4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
+			dmas = <&dmac0 2>, <&dmac0 3>;
+			dma-names ="tx", "rx";
+			status = "disabled";
+
+		};
+
+		spi1: spi@10da5000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x10da5000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@10d12000 {
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
+			reg = <0x10d12000 0x500>;
+		};
+
+		timer0: timer0@10c03000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10c03000 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1@10c03100 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10c03100 0x100>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2@10d00000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10d00000 0x100>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3@10d00100 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10d00100 0x100>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		uart0: serial@10c02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10c02000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART0_RESET>;
+			status = "disabled";
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+		};
+
+		uart1: serial@10c02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10c02100 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART1_RESET>;
+			status = "disabled";
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+		};
+
+		usb0: usb@10b00000 {
+			compatible = "snps,dwc2";
+			reg = <0x10b00000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr AGILEX5_USB2OTG_HCLK>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@10d00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00200 0x100>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@10d00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00300 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@10d00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00400 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@10d00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00500 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog4: watchdog@10d00600 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00600 0x100>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG4_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		qspi: spi@108d2000 {
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			reg = <0x108d2000 0x100>,
+			      <0x10900000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
new file mode 100644
index 0000000000..c533e5a3a6
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023, Intel Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 SoCDK";
+	compatible = "intel,socfpga-agilex5-socdk", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
new file mode 100644
index 0000000000..1a32840c74
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2022, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex n6000";
+	compatible = "intel,socfpga-agilex-n6000", "intel,socfpga-agilex";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	soc {
+		bus@80000000 {
+			compatible = "simple-bus";
+			reg = <0x80000000 0x60000000>,
+				<0xf9000000 0x00100000>;
+			reg-names = "axi_h2f", "axi_h2f_lw";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
+
+			dma-controller@0 {
+				compatible = "intel,hps-copy-engine";
+				reg = <0x00000000 0x00000000 0x00001000>;
+				#dma-cells = <1>;
+			};
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&fpga_mgr {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
new file mode 100644
index 0000000000..0536906576
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex SoCDK";
+	compatible = "intel,socfpga-agilex-socdk", "intel,socfpga-agilex";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x04200000>;
+			};
+
+			root: partition@4200000 {
+				label = "Root Filesystem - UBIFS";
+				reg = <0x04200000 0x0BE00000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
new file mode 100644
index 0000000000..0f9020bd0c
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex SoCDK";
+	compatible = "intel,socfpga-agilex-socdk", "intel,socfpga-agilex";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <16>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+		partition@200000 {
+			label = "root";
+			reg = <0x200000 0x3fe00000>;
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
new file mode 100644
index 0000000000..5ddfdff37c
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2021, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "eASIC N5X SoCDK";
+	compatible = "intel,n5x-socdk", "intel,socfpga-agilex";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	soc {
+		sdram_edac: memory-controller@f87f8000 {
+			compatible = "snps,ddrc-3.80a";
+			reg = <0xf87f8000 0x400>;
+			interrupts = <0 175 4>;
+			status = "okay";
+		};
+	};
+};
+
+&clkmgr {
+	compatible = "intel,easic-n5x-clkmgr";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x03FE0000>;
+			};
+
+			qspi_rootfs: partition@3fe0000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x03FE0000 0x0C020000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/lg/Makefile b/arch/arm64/boot/dts/lg/Makefile
new file mode 100644
index 0000000000..4c3959e24e
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb
+dtb-$(CONFIG_ARCH_LG1K) += lg1313-ref.dtb
diff --git a/arch/arm64/boot/dts/lg/lg1312-ref.dts b/arch/arm64/boot/dts/lg/lg1312-ref.dts
new file mode 100644
index 0000000000..260a2c5b19
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1312-ref.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg1312 Reference Board.
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+/dts-v1/;
+
+#include "lg1312.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	model = "LG Electronics, DTV SoC LG1312 Reference Board";
+	compatible = "lge,lg1312-ref", "lge,lg1312";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
new file mode 100644
index 0000000000..48ec4ebec0
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg1312 SoC
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "lge,lg1312";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		eth0: ethernet@c1b00000 {
+			compatible = "cdns,gem";
+			reg = <0x0 0xc1b00000 0x1000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "hclk", "pclk";
+			phy-mode = "rmii";
+			/* Filled in by boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		#interrupt-cells = <3>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		spi0: spi@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		spi1: spi@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		dmac0: dma-controller@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/lg/lg1313-ref.dts b/arch/arm64/boot/dts/lg/lg1313-ref.dts
new file mode 100644
index 0000000000..e89ae85378
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1313-ref.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg1313 Reference Board.
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+/dts-v1/;
+
+#include "lg1313.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	model = "LG Electronics, DTV SoC LG1313 Reference Board";
+	compatible = "lge,lg1313-ref", "lge,lg1313";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
new file mode 100644
index 0000000000..3869460aa5
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg1313 SoC
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "lge,lg1313";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		eth0: ethernet@c3700000 {
+			compatible = "cdns,gem";
+			reg = <0x0 0xc3700000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "hclk", "pclk";
+			phy-mode = "rmii";
+			/* Filled in by boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		#interrupt-cells = <3>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		spi0: spi@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		spi1: spi@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		dmac0: dma-controller@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
new file mode 100644
index 0000000000..79ac09b58a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+# Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-gl-mv1000.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-mochabin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-puzzle-m801.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
new file mode 100644
index 0000000000..62d03ffa94
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell AC5 SoC";
+	compatible = "marvell,ac5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges;
+
+		internal-regs@7f000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 16M internal register @ 0x7f00_0000 */
+			ranges = <0x0 0x0 0x7f000000 0x1000000>;
+			dma-coherent;
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "okay";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			mdio: mdio@22004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x22004 0x4>;
+				clocks = <&cnm_clock>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&cnm_clock>;
+				clock-names = "core";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency=<100000>;
+
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-1 = <&i2c0_gpio>;
+				scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&cnm_clock>;
+				clock-names = "core";
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency=<100000>;
+
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-1 = <&i2c1_gpio>;
+				scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "disabled";
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl0 0 0 32>;
+				marvell,pwm-offset = <0x1f0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				reg = <0x18140 0x40>;
+				compatible = "marvell,orion-gpio";
+				ngpios = <14>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl0 0 32 14>;
+				marvell,pwm-offset = <0x1f0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		/*
+		 * Dedicated section for devices behind 32bit controllers so we
+		 * can configure specific DMA mapping for them
+		 */
+		behind-32bit-controller@7f000000 {
+			compatible = "simple-bus";
+			#address-cells = <0x2>;
+			#size-cells = <0x2>;
+			ranges = <0x0 0x0 0x0 0x7f000000 0x0 0x1000000>;
+			/* Host phy ram starts at 0x200M */
+			dma-ranges = <0x0 0x0 0x2 0x0 0x1 0x0>;
+			dma-coherent;
+
+			eth0: ethernet@20000 {
+				compatible = "marvell,armada-ac5-neta";
+				reg = <0x0 0x20000 0x0 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cnm_clock>;
+				phy-mode = "sgmii";
+				status = "disabled";
+			};
+
+			eth1: ethernet@24000 {
+				compatible = "marvell,armada-ac5-neta";
+				reg = <0x0 0x24000 0x0 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cnm_clock>;
+				phy-mode = "sgmii";
+				status = "disabled";
+			};
+
+			usb0: usb@80000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x0 0x80000 0x0 0x500>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			usb1: usb@a0000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x0 0xa0000 0x0 0x500>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		pinctrl0: pinctrl@80020100 {
+			compatible = "marvell,ac5-pinctrl";
+			reg = <0 0x80020100 0 0x20>;
+
+			i2c0_pins: i2c0-pins {
+				marvell,pins = "mpp26", "mpp27";
+				marvell,function = "i2c0";
+			};
+
+			i2c0_gpio: i2c0-gpio-pins {
+				marvell,pins = "mpp26", "mpp27";
+				marvell,function = "gpio";
+			};
+
+			i2c1_pins: i2c1-pins {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "i2c1";
+			};
+
+			i2c1_gpio: i2c1-gpio-pins {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "i2c1";
+			};
+		};
+
+		spi0: spi@805a0000 {
+			compatible = "marvell,armada-3700-spi";
+			reg = <0x0 0x805a0000 0x0 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&spi_clock>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi1: spi@805a8000 {
+			compatible = "marvell,armada-3700-spi";
+			reg = <0x0 0x805a8000 0x0 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&spi_clock>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		nand: nand-controller@805b0000 {
+			compatible = "marvell,ac5-nand-controller";
+			reg =  <0x0 0x805b0000 0x0 0x00000054>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nand_clock>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@80600000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x80600000 0x0 0x10000>, /* GICD */
+			      <0x0 0x80660000 0x0 0x40000>; /* GICR */
+			interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	clocks {
+		cnm_clock: cnm-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <328000000>;
+		};
+
+		spi_clock: spi-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		nand_clock: nand-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
new file mode 100644
index 0000000000..f0ebdb84ee
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For RD-AC5X.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+/*
+ * Device Tree file for Marvell Alleycat 5X development board
+ * This board file supports the B configuration of the board
+ */
+
+/dts-v1/;
+
+#include "ac5-98dx35xx.dtsi"
+
+/ {
+	model = "Marvell RD-AC5X Board";
+	compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5";
+
+	aliases {
+		serial0 = &uart0;
+		spiflash0 = &spiflash0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x2 0x00000000 0x0 0x40000000>;
+	};
+
+	usb1phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+};
+
+/* USB0 is a host USB */
+&usb0 {
+	status = "okay";
+};
+
+/* USB1 is a peripheral USB */
+&usb1 {
+	status = "okay";
+	phys = <&usb1phy>;
+	phy-names = "usb-phy";
+	dr_mode = "peripheral";
+};
+
+&spi0 {
+	status = "okay";
+
+	spiflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "spi_flash_part0";
+			reg = <0x0 0x800000>;
+		};
+
+		parition@1 {
+			label = "spi_flash_part1";
+			reg = <0x800000 0x700000>;
+		};
+
+		parition@2 {
+			label = "spi_flash_part2";
+			reg = <0xF00000 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi
new file mode 100644
index 0000000000..2ab72f854b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5X.
+ *
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include "ac5-98dx25xx.dtsi"
+
+/ {
+	model = "Marvell AC5X SoC";
+	compatible = "marvell,ac5x", "marvell,ac5";
+};
+
+&cnm_clock {
+	clock-frequency = <325000000>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
new file mode 100644
index 0000000000..dc1182ec9f
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 371x family of SoCs
+ * (also named 88F3710)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3710 SoC";
+	compatible = "marvell,armada3710", "marvell,armada3700";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
new file mode 100644
index 0000000000..0cfb384920
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 3720 development board
+ * (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is compatible with the version 1.4 and the version 2.0 of
+ * the board, however the CON numbers are different between the 2
+ * version
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
+	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	exp_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&exp_usb3_vbus>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	vcc_sd_reg2: regulator-vmcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* Gigabit module on CON19(V2.0)/CON21(V1.4) */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	status = "okay";
+};
+
+/* Gigabit module on CON18(V2.0)/CON20(V1.4) */
+&eth1 {
+	phy-mode = "sgmii";
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	gpio_exp: pca9555@22 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0x22>;
+		/*
+		 * IO0_0: PWR_EN_USB2	IO1_0: PWR_EN_VTT
+		 * IO0_1: PWR_EN_USB23	IO1_1: MPCIE_WDISABLE
+		 * IO0_2: PWR_EN_SATA	IO1_2: RGMII_DEV_RSTN
+		 * IO0_3: PWR_EN_PCIE	IO1_3: SGMII_DEV_RSTN
+		 * IO0_4: PWR_EN_SD
+		 * IO0_5: PWR_EN_EMMC
+		 * IO0_6: PWR_EN_RGMII	IO1_6: SATA_USB3.0_SEL
+		 * IO0_7: PWR_EN_SGMII	IO1_7: PWR_MCI_PS
+		 */
+	};
+
+	rtc@68  {
+		/* PT7C4337A from pericom fully compatible with the ds1337 */
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* CON3 */
+&sata {
+	status = "okay";
+};
+
+&sdhci0 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+	wp-inverted;
+	cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+	vmmc-supply = <&vcc_sd_reg2>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "bootloader";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "U-boot Env";
+				reg = <0x200000 0x10000>;
+			};
+			partition@210000 {
+				label = "Linux";
+				reg = <0x210000 0xDF0000>;
+			};
+		};
+	};
+};
+
+/*
+ * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
+ * an FTDI (also on CON24(V2.0)/CON26(V1.4)).
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/* CON26(V2.0)/CON28(V1.4) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+/* CON27(V2.0)/CON29(V1.4) */
+&usb2 {
+	status = "okay";
+};
+
+/* CON29(V2.0)/CON31(V1.4) */
+&usb3 {
+	status = "okay";
+	usb-phy = <&usb3_phy>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
new file mode 100644
index 0000000000..57fc698e55
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+	model = "Methode eDPU Board";
+	compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
+};
+
+&eth0 {
+	phy-mode = "2500base-x";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
new file mode 100644
index 0000000000..6715a19c14
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
+	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3700";
+};
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
new file mode 100644
index 0000000000..f9abef8dcc
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for ESPRESSObin-Ultra board.
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ *
+ * Jason Hung <jhung@globalscaletechnologies.com>
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Ultra Board";
+	compatible = "globalscale,espressobin-ultra", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3700";
+
+	aliases {
+		/* ethernet1 is WAN port */
+		ethernet1 = &switch0port5;
+		ethernet2 = &switch0port1;
+		ethernet3 = &switch0port2;
+		ethernet4 = &switch0port3;
+		ethernet5 = &switch0port4;
+	};
+
+	/delete-node/ regulator;
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_vbus>;
+	};
+
+	gpio-leds {
+		pinctrl-names = "default";
+		compatible = "gpio-leds";
+		/* No assigned functions to the LEDs by default */
+		led1 {
+			label = "ebin-ultra:blue:led1";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+		led2 {
+			label = "ebin-ultra:green:led2";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+		led3 {
+			label = "ebin-ultra:red:led3";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+		};
+		led4 {
+			label = "ebin-ultra:yellow:led4";
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	/delete-property/ vqmmc-supply;
+	status = "disabled";
+};
+
+&spi0 {
+	flash@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x3e0000>;
+			};
+			partition@3e0000 {
+				label = "hw-info";
+				reg = <0x3e0000 0x10000>;
+				read-only;
+			};
+			partition@3f0000 {
+				label = "u-boot-env";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <100000>;
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&usb3 {
+	usb-phy = <&usb3_phy>;
+};
+
+&mdio {
+	extphy: ethernet-phy@1 {
+		reg = <1>;
+
+		reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&switch0 {
+	reg = <3>;
+
+	reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+
+	ports {
+		switch0port1: port@1 {
+			reg = <1>;
+			label = "lan0";
+			phy-handle = <&switch0phy0>;
+		};
+
+		switch0port2: port@2 {
+			reg = <2>;
+			label = "lan1";
+			phy-handle = <&switch0phy1>;
+		};
+
+		switch0port3: port@3 {
+			reg = <3>;
+			label = "lan2";
+			phy-handle = <&switch0phy2>;
+		};
+
+		switch0port4: port@4 {
+			reg = <4>;
+			label = "lan3";
+			phy-handle = <&switch0phy3>;
+		};
+
+		switch0port5: port@5 {
+			reg = <5>;
+			label = "wan";
+			phy-handle = <&extphy>;
+			phy-mode = "sgmii";
+		};
+	};
+
+	mdio {
+		switch0phy3: switch0phy3@14 {
+			reg = <0x14>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
new file mode 100644
index 0000000000..2a8aa3901a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
+	compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
+		     "globalscale,espressobin", "marvell,armada3720",
+		     "marvell,armada3700";
+
+	aliases {
+		/* ethernet1 is wan port */
+		ethernet1 = &switch0port3;
+		ethernet3 = &switch0port1;
+	};
+};
+
+&switch0port1 {
+	label = "lan1";
+};
+
+&switch0port3 {
+	label = "wan";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&led2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
new file mode 100644
index 0000000000..b03af87611
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board V7";
+	compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3700";
+
+	aliases {
+		/* ethernet1 is wan port */
+		ethernet1 = &switch0port3;
+		ethernet3 = &switch0port1;
+	};
+};
+
+&switch0port1 {
+	label = "lan1";
+};
+
+&switch0port3 {
+	label = "wan";
+};
+
+&led2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
new file mode 100644
index 0000000000..c5a834b33b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
+ * Copyright (C) 2016 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board";
+	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3700";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
new file mode 100644
index 0000000000..5fc613d241
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
+ * Copyright (C) 2016 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+		/* for dsa slave device */
+		ethernet1 = &switch0port1;
+		ethernet2 = &switch0port2;
+		ethernet3 = &switch0port3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	led2: gpio-led2 {
+		/* led2 is working only on v7 board */
+		status = "disabled";
+
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "led2";
+			gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+/* J9 */
+&pcie0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+};
+
+/* J6 */
+&sata {
+	status = "okay";
+};
+
+/* U11 */
+&sdhci0 {
+	/* Main DTS file for Espressobin is without eMMC */
+	status = "disabled";
+
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+/* J1 */
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+	};
+};
+
+/* Exported on the micro USB connector J5 through an FTDI */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/*
+ * Connector J17 and J18 expose a number of different features. Some pins are
+ * multiplexed. This is the case for instance for the following features:
+ * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of
+ *   how to enable it. Beware that the signals are 1.8V TTL.
+ * - I2C
+ * - SPI
+ * - MMC
+ */
+
+/* J7 */
+&usb3 {
+	status = "okay";
+};
+
+/* J8 */
+&usb2 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0port0: port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			switch0port1: port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			switch0port2: port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+			};
+
+			switch0port3: port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
new file mode 100644
index 0000000000..b1b45b4fa9
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "GL.iNet GL-MV1000";
+	compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios-states = <0>;
+		states = <1800000 0x1
+			3300000 0x0>;
+		enable-active-high;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		switch {
+			label = "switch";
+			linux,code = <BTN_0>;
+			gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		vpn {
+			label = "green:vpn";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "green:wan";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: power {
+			label = "green:power";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0 0xf0000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot-env";
+				reg = <0xf0000 0x8000>;
+			};
+
+			factory: partition@f8000 {
+				label = "factory";
+				reg = <0xf8000 0x8000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "dtb";
+				reg = <0x100000 0x10000>;
+				read-only;
+			};
+
+			partition@110000 {
+				label = "rescue";
+				reg = <0x110000 0x1000000>;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	no-1-8-v;
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	nvmem-cells = <&macaddr_factory_0>;
+	nvmem-cell-names = "mac-address";
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+
+	macaddr_factory_6: macaddr@6 {
+		reg = <0x6 0x6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
new file mode 100644
index 0000000000..805ef2d79b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -0,0 +1,874 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CZ.NIC Turris Mox Board
+ * 2019 by Marek Behún <kabel@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "CZ.NIC Turris Mox Board";
+	compatible = "cznic,turris-mox", "marvell,armada3720",
+		     "marvell,armada3700";
+
+	aliases {
+		spi0 = &spi0;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led {
+			label = "mox:red:activity";
+			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	exp_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	vsdc_reg: vsdc-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	vsdio_reg: vsdio-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	sdhci1_pwrseq: sdhci1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+
+		/* enabled by U-Boot if SFP module is present */
+		status = "disabled";
+	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	/delete-property/ mrvl,i2c-fast-mode;
+	status = "okay";
+
+	/* MCP7940MT-I/MNY RTC */
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	status = "okay";
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	slot-power-limit-milliwatt = <10000>;
+	/*
+	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
+	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
+	 * 2 size cells and also expects that the second range starts at 16 MB offset. Also it
+	 * expects that first range uses same address for PCI (child) and CPU (parent) cells (so
+	 * no remapping) and that this address is the lowest from all specified ranges. If these
+	 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
+	 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
+	 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
+	 * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in
+	 * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix):
+	 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
+	 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
+	 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+	 * Bug related to requirement of same child and parent addresses for first range is fixed
+	 * in U-Boot version 2022.04 by following commit:
+	 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17
+	 */
+	#address-cells = <3>;
+	#size-cells = <2>;
+	ranges = <0x81000000 0 0xe8000000   0 0xe8000000   0 0x01000000   /* Port 0 IO */
+		  0x82000000 0 0xe9000000   0 0xe9000000   0 0x07000000>; /* Port 0 MEM */
+
+	/* enabled by U-Boot if PCIe module is present */
+	status = "disabled";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&eth1 {
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	phys = <&comphy0 1>;
+};
+
+&sdhci0 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
+	vqmmc-supply = <&vsdc_reg>;
+	marvell,pad-type = "sd";
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	non-removable;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vsdio_reg>;
+	mmc-pwrseq = <&sdhci1_pwrseq>;
+	/* forbid SDR104 for FCC purposes */
+	sdhci-caps-mask = <0x2 0x0>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
+	assigned-clocks = <&nb_periph_clk 7>;
+	assigned-clock-parents = <&tbg 1>;
+	assigned-clock-rates = <20000000>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "secure-firmware";
+				reg = <0x0 0x20000>;
+			};
+
+			partition@20000 {
+				label = "a53-firmware";
+				reg = <0x20000 0x160000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
+			};
+
+			partition@190000 {
+				label = "Rescue system";
+				reg = <0x190000 0x660000>;
+			};
+
+			partition@7f0000 {
+				label = "dtb";
+				reg = <0x7f0000 0x10000>;
+			};
+		};
+	};
+
+	moxtet: moxtet@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "cznic,moxtet";
+		reg = <1>;
+		reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <10000000>;
+		spi-cpol;
+		spi-cpha;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		status = "okay";
+
+		moxtet_sfp: gpio@0 {
+			compatible = "cznic,moxtet-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			status = "disabled";
+		};
+	};
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&comphy2 {
+	connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&exp_usb3_vbus>;
+	};
+};
+
+&usb3 {
+	status = "okay";
+	phys = <&comphy2 0>;
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	/* switch nodes are enabled by U-Boot if modules are present */
+	switch0@10 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x10>;
+		dsa,member = <0 0>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(0)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan5";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan6";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan7";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan8";
+				phy-handle = <&switch0phy8>;
+			};
+
+			port@9 {
+				reg = <0x9>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+
+			switch0port10: port@a {
+				reg = <0xa>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port9 &switch2port9>;
+				status = "disabled";
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch0@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2>;
+		dsa,member = <0 0>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1_topaz: switch0phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy2_topaz: switch0phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy3_topaz: switch0phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy4_topaz: switch0phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan1";
+				phy-handle = <&switch0phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan2";
+				phy-handle = <&switch0phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan3";
+				phy-handle = <&switch0phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan4";
+				phy-handle = <&switch0phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "cpu";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				ethernet = <&eth1>;
+			};
+		};
+	};
+
+	switch1@11 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x11>;
+		dsa,member = <0 1>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(1)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1phy1: switch1phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch1phy2: switch1phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch1phy3: switch1phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch1phy4: switch1phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch1phy5: switch1phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch1phy6: switch1phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch1phy7: switch1phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch1phy8: switch1phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan9";
+				phy-handle = <&switch1phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan10";
+				phy-handle = <&switch1phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan11";
+				phy-handle = <&switch1phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan12";
+				phy-handle = <&switch1phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan13";
+				phy-handle = <&switch1phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan14";
+				phy-handle = <&switch1phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan15";
+				phy-handle = <&switch1phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan16";
+				phy-handle = <&switch1phy8>;
+			};
+
+			switch1port9: port@9 {
+				reg = <0x9>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch0port10>;
+			};
+
+			switch1port10: port@a {
+				reg = <0xa>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch2port9>;
+				status = "disabled";
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch1@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2>;
+		dsa,member = <0 1>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1phy1_topaz: switch1phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch1phy2_topaz: switch1phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch1phy3_topaz: switch1phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch1phy4_topaz: switch1phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan9";
+				phy-handle = <&switch1phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan10";
+				phy-handle = <&switch1phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan11";
+				phy-handle = <&switch1phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan12";
+				phy-handle = <&switch1phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch0port10>;
+			};
+		};
+	};
+
+	switch2@12 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x12>;
+		dsa,member = <0 2>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(2)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2phy1: switch2phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch2phy2: switch2phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch2phy3: switch2phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch2phy4: switch2phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch2phy5: switch2phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch2phy6: switch2phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch2phy7: switch2phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch2phy8: switch2phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan17";
+				phy-handle = <&switch2phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan18";
+				phy-handle = <&switch2phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan19";
+				phy-handle = <&switch2phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan20";
+				phy-handle = <&switch2phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan21";
+				phy-handle = <&switch2phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan22";
+				phy-handle = <&switch2phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan23";
+				phy-handle = <&switch2phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan24";
+				phy-handle = <&switch2phy8>;
+			};
+
+			switch2port9: port@9 {
+				reg = <0x9>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port10 &switch0port10>;
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch2@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2>;
+		dsa,member = <0 2>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2phy1_topaz: switch2phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch2phy2_topaz: switch2phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch2phy3_topaz: switch2phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch2phy4_topaz: switch2phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan17";
+				phy-handle = <&switch2phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan18";
+				phy-handle = <&switch2phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan19";
+				phy-handle = <&switch2phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan20";
+				phy-handle = <&switch2phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port10 &switch0port10>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
new file mode 100644
index 0000000000..c76eceabd3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+	model = "Methode uDPU Board";
+	compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
+
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpios = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+};
+
+&pinctrl_nb {
+	i2c1_recovery_pins: i2c1-recovery-pins {
+		groups = "i2c1";
+		function = "gpio";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_recovery_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
+	scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&eth0 {
+	phy-mode = "sgmii";
+	sfp = <&sfp_eth0>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
new file mode 100644
index 0000000000..3f79923376
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2019 Methode Electronics
+ * Copyright (C) 2019 Telus
+ *
+ * Vladimir Vid <vladimir.vid@sartura.hr>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power1 {
+			label = "udpu:green:power";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power2 {
+			label = "udpu:red:power";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-network1 {
+			label = "udpu:green:network";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-network2 {
+			label = "udpu:red:network";
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-alarm1 {
+			label = "udpu:green:alarm";
+			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-alarm2 {
+			label = "udpu:red:alarm";
+			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x180000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
+			};
+		};
+	};
+};
+
+&pinctrl_nb {
+	i2c2_recovery_pins: i2c2-recovery-pins {
+		groups = "i2c2";
+		function = "gpio";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_recovery_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
+	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	temp-sensor@48 {
+		compatible = "ti,tmp75c";
+		reg = <0x48>;
+	};
+
+	temp-sensor@49 {
+		compatible = "ti,tmp75c";
+		reg = <0x49>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	managed = "in-band-status";
+	phys = <&comphy1 0>;
+};
+
+&eth1 {
+	phy-mode = "sgmii";
+	status = "okay";
+	managed = "in-band-status";
+	phys = <&comphy0 1>;
+	sfp = <&sfp_eth1>;
+};
+
+&usb3 {
+	status = "okay";
+	phys = <&usb2_utmi_otg_phy>;
+	phy-names = "usb2-utmi-otg-phy";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
new file mode 100644
index 0000000000..02ae1e1532
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 372x family of SoCs
+ * (also named 88F3720)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 SoC";
+	compatible = "marvell,armada3720", "marvell,armada3700";
+
+	cpus {
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clocks = <&nb_periph_clk 16>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
new file mode 100644
index 0000000000..e300145ad1
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 37xx family of SoCs.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 37xx SoC";
+	compatible = "marvell,armada3700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * The PSCI firmware region depicted below is the default one
+		 * and should be updated by the bootloader.
+		 */
+		psci-area@4000000 {
+			reg = <0 0x4000000 0 0x200000>;
+			no-map;
+		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			clocks = <&nb_periph_clk 16>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		internal-regs@d0000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 32M internal register @ 0xd000_0000 */
+			ranges = <0x0 0x0 0xd0000000 0x2000000>;
+
+			wdt: watchdog@8300 {
+				compatible = "marvell,armada-3700-wdt";
+				reg = <0x8300 0x40>;
+				marvell,system-controller = <&cpu_misc>;
+				clocks = <&xtalclk>;
+			};
+
+			cpu_misc: system-controller@d000 {
+				compatible = "marvell,armada-3700-cpu-misc",
+					     "syscon";
+				reg = <0xd000 0x1000>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,armada-3700-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10600 0xA00>;
+				clocks = <&nb_periph_clk 7>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				num-cs = <4>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11000 0x24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&nb_periph_clk 10>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11080 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11080 0x24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&nb_periph_clk 9>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			avs: avs@11500 {
+				compatible = "marvell,armada-3700-avs",
+					     "syscon";
+				reg = <0x11500 0x40>;
+			};
+
+			uartclk: clock-controller@12010 {
+				compatible = "marvell,armada-3700-uart-clock";
+				reg = <0x12010 0x4>, <0x12210 0x4>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+					 <&tbg 3>, <&xtalclk>;
+				clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S",
+					      "TBG-B-S", "xtal";
+				#clock-cells = <1>;
+			};
+
+			uart0: serial@12000 {
+				compatible = "marvell,armada-3700-uart";
+				reg = <0x12000 0x18>;
+				clocks = <&uartclk 0>;
+				interrupts =
+				<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uart-sum", "uart-tx", "uart-rx";
+				status = "disabled";
+			};
+
+			uart1: serial@12200 {
+				compatible = "marvell,armada-3700-uart-ext";
+				reg = <0x12200 0x30>;
+				clocks = <&uartclk 1>;
+				interrupts =
+				<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "uart-tx", "uart-rx";
+				status = "disabled";
+			};
+
+			nb_periph_clk: nb-periph-clk@13000 {
+				compatible = "marvell,armada-3700-periph-clock-nb",
+					     "syscon";
+				reg = <0x13000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			sb_periph_clk: sb-periph-clk@18000 {
+				compatible = "marvell,armada-3700-periph-clock-sb";
+				reg = <0x18000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			tbg: tbg@13200 {
+				compatible = "marvell,armada-3700-tbg-clock";
+				reg = <0x13200 0x100>;
+				clocks = <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			pinctrl_nb: pinctrl@13800 {
+				compatible = "marvell,armada3710-nb-pinctrl",
+					     "syscon", "simple-mfd";
+				reg = <0x13800 0x100>, <0x13C00 0x20>;
+				/* MPP1[19:0] */
+				gpionb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_nb 0 0 36>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts =
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				xtalclk: xtal-clk {
+					compatible = "marvell,armada-3700-xtal-clock";
+					clock-output-names = "xtal";
+					#clock-cells = <0>;
+				};
+
+				spi_quad_pins: spi-quad-pins {
+					groups = "spi_quad";
+					function = "spi";
+				};
+
+				spi_cs1_pins: spi-cs1-pins {
+					groups = "spi_cs1";
+					function = "spi";
+				};
+
+				i2c1_pins: i2c1-pins {
+					groups = "i2c1";
+					function = "i2c";
+				};
+
+				i2c2_pins: i2c2-pins {
+					groups = "i2c2";
+					function = "i2c";
+				};
+
+				uart1_pins: uart1-pins {
+					groups = "uart1";
+					function = "uart";
+				};
+
+				uart2_pins: uart2-pins {
+					groups = "uart2";
+					function = "uart";
+				};
+
+				mmc_pins: mmc-pins {
+					groups = "emmc_nb";
+					function = "emmc";
+				};
+			};
+
+			nb_pm: syscon@14000 {
+				compatible = "marvell,armada-3700-nb-pm",
+					     "syscon";
+				reg = <0x14000 0x60>;
+			};
+
+			comphy: phy@18300 {
+				compatible = "marvell,comphy-a3700";
+				reg = <0x18300 0x300>,
+				      <0x1F000 0x400>,
+				      <0x5C000 0x400>,
+				      <0xe0178 0x8>;
+				reg-names = "comphy",
+					    "lane1_pcie_gbe",
+					    "lane0_usb3_gbe",
+					    "lane2_sata_usb3";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&xtalclk>;
+				clock-names = "xtal";
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+			};
+
+			pinctrl_sb: pinctrl@18800 {
+				compatible = "marvell,armada3710-sb-pinctrl",
+					     "syscon", "simple-mfd";
+				reg = <0x18800 0x100>, <0x18C00 0x20>;
+				/* MPP2[23:0] */
+				gpiosb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_sb 0 0 30>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts =
+					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				rgmii_pins: mii-pins {
+					groups = "rgmii";
+					function = "mii";
+				};
+
+				smi_pins: smi-pins {
+					groups = "smi";
+					function = "smi";
+				};
+
+				sdio_pins: sdio-pins {
+					groups = "sdio_sb";
+					function = "sdio";
+				};
+
+				pcie_reset_pins: pcie-reset-pins {
+					groups = "pcie1"; /* this actually controls "pcie1_reset" */
+					function = "gpio";
+				};
+
+				pcie_clkreq_pins: pcie-clkreq-pins {
+					groups = "pcie1_clkreq";
+					function = "pcie";
+				};
+			};
+
+			eth0: ethernet@30000 {
+				   compatible = "marvell,armada-3700-neta";
+				   reg = <0x30000 0x4000>;
+				   interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				   clocks = <&sb_periph_clk 8>;
+				   status = "disabled";
+			};
+
+			mdio: mdio@32004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x32004 0x4>;
+			};
+
+			eth1: ethernet@40000 {
+				compatible = "marvell,armada-3700-neta";
+				reg = <0x40000 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 7>;
+				status = "disabled";
+			};
+
+			usb3: usb@58000 {
+				compatible = "marvell,armada3700-xhci",
+				"generic-xhci";
+				reg = <0x58000 0x4000>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 12>;
+				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
+				phy-names = "usb3-phy", "usb2-utmi-otg-phy";
+				status = "disabled";
+			};
+
+			usb2_utmi_otg_phy: phy@5d000 {
+				compatible = "marvell,a3700-utmi-otg-phy";
+				reg = <0x5d000 0x800>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb32_syscon: system-controller@5d800 {
+				compatible = "marvell,armada-3700-usb2-host-device-misc",
+				"syscon";
+				reg = <0x5d800 0x800>;
+			};
+
+			usb2: usb@5e000 {
+				compatible = "marvell,armada-3700-ehci";
+				reg = <0x5e000 0x1000>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_utmi_host_phy>;
+				phy-names = "usb2-utmi-host-phy";
+				status = "disabled";
+			};
+
+			usb2_utmi_host_phy: phy@5f000 {
+				compatible = "marvell,a3700-utmi-host-phy";
+				reg = <0x5f000 0x800>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb2_syscon: system-controller@5f800 {
+				compatible = "marvell,armada-3700-usb2-host-misc",
+				"syscon";
+				reg = <0x5f800 0x800>;
+			};
+
+			xor@60900 {
+				compatible = "marvell,armada-3700-xor";
+				reg = <0x60900 0x100>,
+				      <0x60b00 0x100>;
+
+				xor10 {
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			crypto: crypto@90000 {
+				compatible = "inside-secure,safexcel-eip97ies";
+				reg = <0x90000 0x20000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "mem", "ring0", "ring1",
+						  "ring2", "ring3", "eip";
+				clocks = <&nb_periph_clk 15>;
+			};
+
+			rwtm: mailbox@b0000 {
+				compatible = "marvell,armada-3700-rwtm-mailbox";
+				reg = <0xb0000 0x100>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+			};
+
+			sdhci1: mmc@d0000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd0000 0x300>,
+				      <0x1e808 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sdhci0: mmc@d8000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd8000 0x300>,
+				      <0x17808 0x4>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sata: sata@e0000 {
+				compatible = "marvell,armada-3700-ahci";
+				reg = <0xe0000 0x178>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 1>;
+				phys = <&comphy2 0>;
+				phy-names = "sata-phy";
+				status = "disabled";
+			};
+
+			gic: interrupt-controller@1d00000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x1d00000 0x10000>, /* GICD */
+				      <0x1d40000 0x40000>, /* GICR */
+				      <0x1d80000 0x2000>,  /* GICC */
+				      <0x1d90000 0x2000>,  /* GICH */
+				      <0x1da0000 0x20000>; /* GICV */
+				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie0: pcie@d0070000 {
+			compatible = "marvell,armada-3700-pcie";
+			device_type = "pci";
+			status = "disabled";
+			reg = <0 0xd0070000 0 0x20000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			clocks = <&sb_periph_clk 13>;
+			msi-parent = <&pcie0>;
+			msi-controller;
+			/*
+			 * The 128 MiB address range [0xe8000000-0xf0000000] is
+			 * dedicated for PCIe and can be assigned to 8 windows
+			 * with size a power of two. Use one 64 KiB window for
+			 * IO at the end and the remaining seven windows
+			 * (totaling 127 MiB) for MEM.
+			 */
+			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
+				  0x81000000 0 0x00000000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			max-link-speed = <2>;
+			phys = <&comphy1 0>;
+			pcie_intc: interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware";
+			mboxes = <&rwtm 0>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
new file mode 100644
index 0000000000..4e46326dd1
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and
+ * one CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+#include "armada-70x0.dtsi"
+
+/ {
+	model = "Marvell Armada 7020";
+	compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
new file mode 100644
index 0000000000..5e5baf6bee
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Marvell Armada 7040 DB board";
+	compatible = "marvell,armada7040-db", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+	};
+
+	cp0_exp_usb3_0_current_regulator: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "cp0-usb3-0-current-regulator";
+		regulator-type = "current";
+		regulator-min-microamp = <500000>;
+		regulator-max-microamp = <900000>;
+		gpios = <&expander0 4 GPIO_ACTIVE_HIGH>;
+		states = <500000 0x0
+			  900000 0x1>;
+		enable-active-high;
+		gpios-states = <0>;
+	};
+
+	cp0_exp_usb3_1_current_regulator: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "cp0-usb3-1-current-regulator";
+		regulator-type = "current";
+		regulator-min-microamp = <500000>;
+		regulator-max-microamp = <900000>;
+		gpios = <&expander0 5 GPIO_ACTIVE_HIGH>;
+		states = <500000 0x0
+			  900000 0x1>;
+		enable-active-high;
+		gpios-states = <0>;
+	};
+
+	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&cp0_exp_usb3_0_current_regulator>;
+	};
+
+	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&cp0_exp_usb3_1_current_regulator>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+
+&cp0_pcie2 {
+	status = "okay";
+	phys = <&cp0_comphy5 2>;
+	phy-names = "cp0-pcie2-x1-phy";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	expander0: pca9555@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+		/*
+		 * IO0_0: USB3_PWR_EN0	IO1_0: USB_3_1_Dev_Detect
+		 * IO0_1: USB3_PWR_EN1	IO1_1: USB2_1_current_limit
+		 * IO0_2: DDR3_4_Detect	IO1_2: Hcon_IO_RstN
+		 * IO0_3: USB2_DEVICE_DETECT
+		 * IO0_4: GPIO_0	IO1_4: SD_Status
+		 * IO0_5: GPIO_1	IO1_5: LDO_5V_Enable
+		 * IO0_6: IHB_5V_Enable	IO1_6: PWR_EN_eMMC
+		 * IO0_7:		IO1_7: SDIO_Vcntrl
+		 */
+	};
+};
+
+&cp0_nand_controller {
+	/*
+	 * SPI on CPM and NAND have common pins on this board. We can
+	 * use only one at a time. To enable the NAND (which will
+	 * disable the SPI), the "status = "okay";" line have to be
+	 * added here.
+	 */
+	pinctrl-0 = <&nand_pins>, <&nand_rb>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "Linux";
+				reg = <0x200000 0xe00000>;
+			};
+
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+
+		};
+	};
+};
+
+&cp0_spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	sata-port@1 {
+		phys = <&cp0_comphy3 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_comphy1 {
+	cp0_usbh0_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&cp0_reg_usb3_0_vbus>;
+	};
+};
+
+&cp0_usb3_0 {
+	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+	phy-names = "cp0-usb3h0-comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_comphy4 {
+	cp0_usbh1_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&cp0_reg_usb3_1_vbus>;
+	};
+};
+
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "cp0-usb3h1-comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
+&cp0_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	/* Network PHY */
+	phy-mode = "10gbase-r";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy2 0>;
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
+};
+
+&cp0_eth1 {
+	status = "okay";
+	/* Network PHY */
+	phy = <&phy0>;
+	phy-mode = "sgmii";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 1>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
new file mode 100644
index 0000000000..48202810bf
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree file for Globalscale MOCHAbin
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ * Copyright (C) 2021 Sartura Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Globalscale MOCHAbin";
+	compatible = "globalscale,mochabin", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		ethernet3 = &swport1;
+		ethernet4 = &swport2;
+		ethernet5 = &swport3;
+		ethernet6 = &swport4;
+	};
+
+	/* SFP+ 10G */
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* SFP 1G */
+	sfp_eth2: sfp-eth2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c0>;
+		los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* microUSB UART console */
+&uart0 {
+	status = "okay";
+
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+/* eMMC */
+&ap_sdhci0 {
+	status = "okay";
+
+	bus-width = <4>;
+	non-removable;
+	/delete-property/ marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+};
+
+&cp0_pinctrl {
+	cp0_uart0_pins: cp0-uart0-pins {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "uart0";
+	};
+
+	cp0_spi0_pins: cp0-spi0-pins {
+		marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
+		marvell,function = "spi0";
+	};
+
+	cp0_spi1_pins: cp0-spi1-pins {
+		marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+
+	cp0_i2c0_pins: cp0-i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+
+	cp0_i2c1_pins: cp0-i2c1-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "i2c1";
+	};
+
+	pca9554_int_pins: pca9554-int-pins {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	cp0_rgmii1_pins: cp0-rgmii1-pins {
+		marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
+			       "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
+		marvell,function = "ge1";
+	};
+
+	is31_sdb_pins: is31-sdb-pins {
+		marvell,pins = "mpp30";
+		marvell,function = "gpio";
+	};
+
+	cp0_pcie_reset_pins: cp0-pcie-reset-pins {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	cp0_pcie_clkreq_pins: cp0-pcie-clkreq-pins {
+		marvell,pins = "mpp5";
+		marvell,function = "pcie1";
+	};
+
+	cp0_switch_pins: cp0-switch-pins {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "gpio";
+	};
+
+	cp0_phy_pins: cp0-phy-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+};
+
+/* mikroBUS UART */
+&cp0_uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart0_pins>;
+};
+
+/* mikroBUS SPI */
+&cp0_spi0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+};
+
+/* SPI-NOR */
+&cp0_spi1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x3e0000>;
+				read-only;
+			};
+
+			partition@3e0000 {
+				label = "hw-info";
+				reg = <0x3e0000 0x10000>;
+				read-only;
+			};
+
+			partition@3f0000 {
+				label = "u-boot-env";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+/* mikroBUS, 1G SFP and GPIO expander */
+&cp0_i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+
+	sfp_gpio: pca9554@39 {
+		compatible = "nxp,pca9554";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pca9554_int_pins>;
+		reg = <0x39>;
+
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		/*
+		 * IO0_0: SFP+_TX_FAULT
+		 * IO0_1: SFP+_TX_DISABLE
+		 * IO0_2: SFP+_PRSNT
+		 * IO0_3: SFP+_LOSS
+		 * IO0_4: SFP_TX_FAULT
+		 * IO0_5: SFP_TX_DISABLE
+		 * IO0_6: SFP_PRSNT
+		 * IO0_7: SFP_LOSS
+		 */
+	};
+};
+
+/* IS31FL3199, mini-PCIe and 10G SFP+ */
+&cp0_i2c1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+
+	leds@64 {
+		compatible = "issi,is31fl3199";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&is31_sdb_pins>;
+		shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
+		reg = <0x64>;
+
+		led1_red: led@1 {
+			label = "red:led1";
+			reg = <1>;
+			led-max-microamp = <20000>;
+		};
+
+		led1_green: led@2 {
+			label = "green:led1";
+			reg = <2>;
+		};
+
+		led1_blue: led@3 {
+			label = "blue:led1";
+			reg = <3>;
+		};
+
+		led2_red: led@4 {
+			label = "red:led2";
+			reg = <4>;
+		};
+
+		led2_green: led@5 {
+			label = "green:led2";
+			reg = <5>;
+		};
+
+		led2_blue: led@6 {
+			label = "blue:led2";
+			reg = <6>;
+		};
+
+		led3_red: led@7 {
+			label = "red:led3";
+			reg = <7>;
+		};
+
+		led3_green: led@8 {
+			label = "green:led3";
+			reg = <8>;
+		};
+
+		led3_blue: led@9 {
+			label = "blue:led3";
+			reg = <9>;
+		};
+	};
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	/* 88E1512 PHY */
+	eth2phy: ethernet-phy@1 {
+		reg = <1>;
+		sfp = <&sfp_eth2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_phy_pins>;
+		reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 88E6141 Topaz switch */
+	switch: switch@3 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_switch_pins>;
+		reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swport1: port@1 {
+				reg = <1>;
+				label = "lan0";
+				phy-handle = <&swphy1>;
+			};
+
+			swport2: port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&swphy2>;
+			};
+
+			swport3: port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-handle = <&swphy3>;
+			};
+
+			swport4: port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&swphy4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp0_eth1>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swphy1: swphy1@17 {
+				reg = <17>;
+			};
+
+			swphy2: swphy2@18 {
+				reg = <18>;
+			};
+
+			swphy3: swphy3@19 {
+				reg = <19>;
+			};
+
+			swphy4: swphy4@20 {
+				reg = <20>;
+			};
+		};
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* 10G SFP+ */
+&cp0_eth0 {
+	status = "okay";
+
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&sfp_eth0>;
+};
+
+/* Topaz switch uplink */
+&cp0_eth1 {
+	status = "okay";
+
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy0 1>;
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+/* 1G SFP or 1G RJ45 */
+&cp0_eth2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_rgmii1_pins>;
+
+	phy = <&eth2phy>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+/* SMSC USB5434B hub */
+&cp0_usb3_0 {
+	status = "okay";
+
+	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+	phy-names = "cp0-usb3h0-comphy", "utmi";
+};
+
+/* miniPCI-E USB */
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	/* 7 + 12 SATA connector (J24) */
+	sata-port@0 {
+		phys = <&cp0_comphy2 0>;
+		phy-names = "cp0-sata0-0-phy";
+	};
+
+	/* M.2-2250 B-key (J39) */
+	sata-port@1 {
+		phys = <&cp0_comphy3 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+/* miniPCI-E (J5) */
+&cp0_pcie2 {
+	status = "okay";
+
+	pinctrl-names = "default", "clkreq";
+	pinctrl-0 = <&cp0_pcie_reset_pins>;
+	pinctrl-1 = <&cp0_pcie_clkreq_pins>;
+	phys = <&cp0_comphy5 2>;
+	phy-names = "cp0-pcie2-x1-phy";
+	reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
new file mode 100644
index 0000000000..2f440711d2
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and
+ * one CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+#include "armada-70x0.dtsi"
+
+/ {
+	model = "Marvell Armada 7040";
+	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
new file mode 100644
index 0000000000..293403a1a3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 70x0 SoC
+ */
+
+/ {
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
+};
+
+/*
+ * Instantiate the CP110
+ */
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,armada-7k-pinctrl";
+
+		nand_pins: nand-pins {
+			marvell,pins =
+			"mpp15", "mpp16", "mpp17", "mpp18",
+			"mpp19", "mpp20", "mpp21", "mpp22",
+			"mpp23", "mpp24", "mpp25", "mpp26",
+			"mpp27";
+			marvell,function = "dev";
+		};
+
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13";
+			marvell,function = "nf";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
new file mode 100644
index 0000000000..ba1307c0fa
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
+ * two CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+#include "armada-80x0.dtsi"
+
+/ {
+	model = "Marvell Armada 8020";
+	compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+
+&cp0_rtc {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
new file mode 100644
index 0000000000..4125202028
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 SolidRun ltd.
+ * Based on Marvell MACCHIATOBin board
+ *
+ * Device Tree file for SolidRun's ClearFog GT 8K
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "SolidRun ClearFog GT 8K";
+	compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp1_eth1;
+		ethernet1 = &cp0_eth0;
+		ethernet2 = &cp1_eth2;
+	};
+
+	fan: pwm {
+		compatible = "pwm-fan";
+		/* 20% steps */
+		cooling-levels = <0 51 102 153 204 255>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_fan_pwm_pins>;
+		pwms = <&cp0_gpio2 16 40000>;
+	};
+
+	v_3_3: regulator-3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_3_3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_xhci_vbus_pins>;
+		regulator-name = "v_5v0_usb3_hst_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	sfp_cp0_eth0: sfp-cp0-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		mod-def0-gpios = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&cp0_led0_pins
+			     &cp0_led1_pins>;
+		pinctrl-names = "default";
+		/* No designated function for these LEDs at the moment */
+		led0 {
+			label = "clearfog-gt-8k:green:led0";
+			gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led1 {
+			label = "clearfog-gt-8k:green:led1";
+			gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear button */
+			label = "Rear Button";
+			gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+
+		button-1 {
+			/* The wps button */
+			label = "WPS Button";
+			gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&ap_thermal_ic {
+	polling-delay = <1000>; /* milliseconds */
+	trips {
+		ap_active: trip-active {
+			temperature = <40000>; /* millicelsius */
+			hysteresis = <4000>; /* millicelsius */
+			type = "active";
+		};
+	};
+	cooling-maps {
+		map0 {
+			trip = <&ap_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+		map1 {
+			trip = <&ap_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&cp0_thermal_ic {
+	polling-delay = <1000>; /* milliseconds */
+	trips {
+		cp0_active0: trip-active0 {
+			temperature = <40000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp0_active1: trip-active1 {
+			temperature = <45000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp0_active2: trip-active2 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp0_active3: trip-active3 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+	};
+	cooling-maps {
+		map0 {
+			trip = <&cp0_active0>;
+			cooling-device = <&fan 0 1>;
+		};
+		map1 {
+			trip = <&cp0_active1>;
+			cooling-device = <&fan 1 2>;
+		};
+		map2 {
+			trip = <&cp0_active2>;
+			cooling-device = <&fan 2 3>;
+		};
+		map3 {
+			trip = <&cp0_active3>;
+			cooling-device = <&fan 3 4>;
+		};
+		map4 {
+			trip = <&cp0_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&cp1_thermal_ic {
+	polling-delay = <1000>; /* milliseconds */
+	trips {
+		cp1_active0: trip-active0 {
+			temperature = <40000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp1_active1: trip-active1 {
+			temperature = <45000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp1_active2: trip-active2 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp1_active3: trip-active3 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+	};
+	cooling-maps {
+		map0 {
+			trip = <&cp1_active0>;
+			cooling-device = <&fan 0 1>;
+		};
+		map1 {
+			trip = <&cp1_active1>;
+			cooling-device = <&fan 1 2>;
+		};
+		map2 {
+			trip = <&cp1_active2>;
+			cooling-device = <&fan 2 3>;
+		};
+		map3 {
+			trip = <&cp1_active3>;
+			cooling-device = <&fan 3 4>;
+		};
+		map4 {
+			trip = <&cp1_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	/*
+	 * MPP Bus:
+	 * [0-31] = 0xff: Keep default CP0_shared_pins:
+	 * [11] CLKOUT_MPP_11 (out)
+	 * [23] LINK_RD_IN_CP2CP (in)
+	 * [25] CLKOUT_MPP_25 (out)
+	 * [29] AVS_FB_IN_CP2CP (in)
+	 * [32, 33, 34] pci0/1/2 reset
+	 * [35-38] CP0 I2C1 and I2C0
+	 * [39] GPIO reset button
+	 * [40,41] LED0 and LED1
+	 * [43] 1512 phy reset
+	 * [47] USB VBUS EN (active low)
+	 * [48] FAN PWM
+	 * [49] SFP+ present signal
+	 * [50] TPM interrupt
+	 * [51] WLAN0 disable
+	 * [52] WLAN1 disable
+	 * [53] LTE disable
+	 * [54] NFC reset
+	 * [55] Micro SD card detect
+	 * [56-61] Micro SD
+	 */
+
+	cp0_pci0_reset_pins: pci0-reset-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	cp0_pci1_reset_pins: pci1-reset-pins {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	cp0_pci2_reset_pins: pci2-reset-pins {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	cp0_i2c1_pins: i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+
+	cp0_i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+
+	cp0_gpio_reset_pins: gpio-reset-pins {
+		marvell,pins = "mpp39";
+		marvell,function = "gpio";
+	};
+
+	cp0_led0_pins: led0-pins {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	cp0_led1_pins: led1-pins {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	cp0_copper_eth_phy_reset: copper-eth-phy-reset {
+		marvell,pins = "mpp43";
+		marvell,function = "gpio";
+	};
+
+	cp0_xhci_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+
+	cp0_fan_pwm_pins: fan-pwm-pins {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	cp0_sfp_present_pins: sfp-present-pins {
+		marvell,pins = "mpp49";
+		marvell,function = "gpio";
+	};
+
+	cp0_tpm_irq_pins: tpm-irq-pins {
+		marvell,pins = "mpp50";
+		marvell,function = "gpio";
+	};
+
+	cp0_wlan_disable_pins: wlan-disable-pins {
+		marvell,pins = "mpp51";
+		marvell,function = "gpio";
+	};
+
+	cp0_sdhci_pins: sdhci-pins {
+		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+			       "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+};
+
+&cp0_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>;
+	reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+	phys = <&cp0_comphy0 0>;
+	phy-names = "cp0-pcie0-x1-phy";
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	sata_reset {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	lte_reset {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+
+	wlan_disable {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+
+	lte_disable {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SFP */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	phys = <&cp0_comphy2 0>;
+	sfp = <&sfp_cp0_eth0>;
+};
+
+&cp0_sdhci0 {
+	broken-cd;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp1_pinctrl {
+	/*
+	 * MPP Bus:
+	 * [0-5] TDM
+	 * [6]   VHV Enable
+	 * [7]   CP1 SPI0 CSn1 (FXS)
+	 * [8]   CP1 SPI0 CSn0 (TPM)
+	 * [9.11]CP1 SPI0 MOSI/MISO/CLK
+	 * [13]  CP1 SPI1 MISO (TDM and SPI ROM shared)
+	 * [14]  CP1 SPI1 CS0n (64Mb SPI ROM)
+	 * [15]  CP1 SPI1 MOSI (TDM and SPI ROM shared)
+	 * [16]  CP1 SPI1 CLK (TDM and SPI ROM shared)
+	 * [24]  Topaz switch reset
+	 * [26]  Buzzer
+	 * [27]  CP1 SMI MDIO
+	 * [28]  CP1 SMI MDC
+	 * [29]  CP0 10G SFP TX Disable
+	 * [30]  WPS button
+	 * [31]  Front panel button
+	 */
+
+	cp1_spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+
+	cp1_switch_reset_pins: switch-reset-pins {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	cp1_ge_mdio_pins: ge-mdio-pins {
+		marvell,pins = "mpp27", "mpp28";
+		marvell,function = "ge";
+	};
+
+	cp1_sfp_tx_disable_pins: sfp-tx-disable-pins {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	cp1_wps_button_pins: wps-button-pins {
+		marvell,pins = "mpp30";
+		marvell,function = "gpio";
+	};
+};
+
+&cp1_sata0 {
+	pinctrl-0 = <&cp0_pci1_reset_pins>;
+	status = "okay";
+
+	sata-port@1 {
+		phys = <&cp1_comphy0 1>;
+		phy-names = "cp1-sata0-1-phy";
+	};
+};
+
+&cp1_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_ge_mdio_pins>;
+	status = "okay";
+
+	ge_phy: ethernet-phy@0 {
+		/* LED0 - GB link
+		 * LED1 - on: link, blink: activity
+		 */
+		marvell,reg-init = <3 16 0 0x1017>;
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
+		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
+	};
+
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_switch_reset_pins>;
+		reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp1_eth2>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: switch0phy3@14 {
+				reg = <0x14>;
+			};
+		};
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* 1G copper */
+&cp1_eth1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&ge_phy>;
+	phys = <&cp1_comphy3 1>;
+};
+
+/* Switch uplink */
+&cp1_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy5 2>;
+	managed = "in-band-status";
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&cp1_comphy2 {
+	cp1_usbh0_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&v_5v0_usb3_hst_vbus>;
+	};
+};
+
+&cp1_usb3_0 {
+	phys = <&cp1_comphy2 0>;
+	phy-names = "cp1-usb3h0-comphy";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
new file mode 100644
index 0000000000..92897bd7e6
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada 8040 Development board platform
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-8040.dtsi"
+
+/ {
+	model = "Marvell Armada 8040 DB board";
+	compatible = "marvell,armada8040-db", "marvell,armada8040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth2;
+		ethernet2 = &cp1_eth0;
+		ethernet3 = &cp1_eth1;
+		i2c1 = &cp0_i2c0;
+		i2c2 = &cp1_i2c0;
+	};
+
+	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-usb3h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy: cp0-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_0_vbus>;
+	};
+
+	cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cp1-usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp1_usb3_0_phy: cp1-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp1_reg_usb3_0_vbus>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+/* CON6 on CP0 expansion */
+&cp0_pcie0 {
+	phys = <&cp0_comphy0 0>;
+	phy-names = "cp0-pcie0-x1-phy";
+	status = "okay";
+};
+
+/* CON5 on CP0 expansion */
+&cp0_pcie2 {
+	phys = <&cp0_comphy5 2>;
+	phy-names = "cp0-pcie2-x1-phy";
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/* U31 */
+	expander0: pca9555@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+	};
+
+	/* U25 */
+	expander1: pca9555@25 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x25>;
+	};
+
+};
+
+/* CON4 on CP0 expansion */
+&cp0_sata0 {
+	status = "okay";
+
+	sata-port@0 {
+		phys = <&cp0_comphy1 0>;
+		phy-names = "cp0-sata0-0-phy";
+	};
+	sata-port@1 {
+		phys = <&cp0_comphy3 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+/* CON9 on CP0 expansion */
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	usb-phy = <&cp0_usb3_0_phy>;
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_comphy4 {
+	cp0_usbh1_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&cp0_reg_usb3_1_vbus>;
+	};
+};
+
+/* CON10 on CP0 expansion */
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
+
+/* CON6 on CP1 expansion */
+&cp1_pcie0 {
+	phys = <&cp1_comphy0 0>;
+	phy-names = "cp1-pcie0-x1-phy";
+	status = "okay";
+};
+
+/* CON7 on CP1 expansion */
+&cp1_pcie1 {
+	phys = <&cp1_comphy4 1>;
+	phy-names = "cp1-pcie1-x1-phy";
+	status = "okay";
+};
+
+/* CON5 on CP1 expansion */
+&cp1_pcie2 {
+	phys = <&cp1_comphy5 2>;
+	phy-names = "cp1-pcie2-x1-phy";
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp1_spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Boot";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "Filesystem";
+				reg = <0x200000 0xd00000>;
+			};
+			partition@f00000 {
+				label = "Boot_2nd";
+				reg = <0xf00000 0x100000>;
+			};
+		};
+	};
+};
+
+/*
+ * Proper NAND usage will require DPR-76 to be in position 1-2, which disables
+ * MDIO signal of CP1.
+ */
+&cp1_nand_controller {
+	pinctrl-0 = <&nand_pins>, <&nand_rb>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@200000 {
+				label = "Linux";
+				reg = <0x200000 0xe00000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+/* CON4 on CP1 expansion */
+&cp1_sata0 {
+	status = "okay";
+
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		phy-names = "cp1-sata0-0-phy";
+	};
+	sata-port@1 {
+		phys = <&cp1_comphy3 1>;
+		phy-names = "cp1-sata0-1-phy";
+	};
+};
+
+&cp1_utmi {
+	status = "okay";
+};
+
+/* CON9 on CP1 expansion */
+&cp1_usb3_0 {
+	usb-phy = <&cp1_usb3_0_phy>;
+	phys = <&cp1_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* CON10 on CP1 expansion */
+&cp1_usb3_1 {
+	phys = <&cp1_utmi1>;
+	phy-names = "utmi";
+	status = "okay";
+};
+
+&cp1_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+};
+
+&cp0_sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
new file mode 100644
index 0000000000..411d200642
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include <dt-bindings/leds/common.h>
+
+#include "armada-8040-mcbin.dtsi"
+
+/ {
+	model = "Marvell 8040 MACCHIATOBin Single-shot";
+	compatible = "marvell,armada8040-mcbin-singleshot",
+			"marvell,armada8040-mcbin", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&cp0_led18_pins>;
+		pinctrl-names = "default";
+
+		led18 {
+			gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	sfp = <&sfp_eth0>;
+};
+
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	sfp = <&sfp_eth1>;
+};
+
+&cp0_pinctrl {
+	cp0_led18_pins: led18-pins {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
new file mode 100644
index 0000000000..1766cf5810
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040-mcbin.dtsi"
+
+/ {
+	model = "Marvell 8040 MACCHIATOBin Double-shot";
+	compatible = "marvell,armada8040-mcbin-doubleshot",
+			"marvell,armada8040-mcbin", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+};
+
+&cp0_xmdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+		sfp = <&sfp_eth0>;
+	};
+
+	phy8: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		sfp = <&sfp_eth1>;
+	};
+};
+
+&cp0_eth0 {
+	status = "okay";
+	/* Network PHY */
+	phy = <&phy0>;
+	phy-mode = "10gbase-r";
+};
+
+&cp1_eth0 {
+	status = "okay";
+	/* Network PHY */
+	phy = <&phy8>;
+	phy-mode = "10gbase-r";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
new file mode 100644
index 0000000000..c864df9ec8
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell 8040 MACCHIATOBin";
+	compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp1_eth0;
+		ethernet2 = &cp1_eth1;
+		ethernet3 = &cp1_eth2;
+	};
+
+	/* Regulator labels correspond with schematics */
+	v_3_3: regulator-3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_3_3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_vddo_h: regulator-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_vddo_h";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_xhci_vbus_pins>;
+		regulator-name = "v_5v0_usb3_hst_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	sfp_eth0: sfp-eth0 {
+		/* CON15,16 - CPM lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp0_i2c>;
+		los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp0_pins>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		/* CON17,18 - CPS lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp1_i2c>;
+		los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_eth3: sfp-eth3 {
+		/* CON13,14 - CPS lane 5 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_1g_i2c>;
+		los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so add
+	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+	 */
+	marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_vddo_h>;
+};
+
+&cp0_i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		sfpp1_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		sfp_1g_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+	};
+};
+
+/* J25 UART header */
+&cp0_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart1_pins>;
+	status = "okay";
+};
+
+&cp0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	status = "okay";
+
+	ge_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_pins>;
+	num-lanes = <4>;
+	num-viewport = <8>;
+	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
+	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
+	       <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
+		    "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy";
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	cp0_ge_mdio_pins: ge-mdio-pins {
+		marvell,pins = "mpp32", "mpp34";
+		marvell,function = "ge";
+	};
+	cp0_i2c1_pins: i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+	cp0_i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+	cp0_uart1_pins: uart1-pins {
+		marvell,pins = "mpp40", "mpp41";
+		marvell,function = "uart1";
+	};
+	cp0_xhci_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	cp0_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp51", "mpp53", "mpp54";
+		marvell,function = "gpio";
+	};
+	cp0_pcie_pins: pcie-pins {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+	cp0_sdhci_pins: sdhci-pins {
+		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+			       "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+	cp0_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy4 0>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	/* CPM Lane 5 - U29 */
+	sata-port@1 {
+		phys = <&cp0_comphy5 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+&cp0_sdhci0 {
+	/* U6 */
+	broken-cd;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	/* J38? - USB2.0 only */
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	/* J38? - USB2.0 only */
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy4 0>;
+};
+
+&cp1_eth1 {
+	/* CPS Lane 0 - J5 (Gigabit RJ45) */
+	status = "okay";
+	/* Network PHY */
+	phy = <&ge_phy>;
+	phy-mode = "sgmii";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy0 1>;
+};
+
+&cp1_eth2 {
+	/* CPS Lane 5 */
+	status = "okay";
+	/* Network PHY */
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy5 2>;
+	sfp = <&sfp_eth3>;
+};
+
+&cp1_pinctrl {
+	cp1_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp8", "mpp10", "mpp11";
+		marvell,function = "gpio";
+	};
+	cp1_spi1_pins: spi1-pins {
+		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+	cp1_uart0_pins: uart0-pins {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "uart0";
+	};
+	cp1_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+	cp1_sfpp0_pins: sfpp0-pins {
+		marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+};
+
+/* J27 UART header */
+&cp1_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_uart0_pins>;
+	status = "okay";
+};
+
+&cp1_sata0 {
+	status = "okay";
+
+	/* CPS Lane 1 - U32 */
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		phy-names = "cp1-sata0-0-phy";
+	};
+
+	/* CPS Lane 3 - U31 */
+	sata-port@1 {
+		phys = <&cp1_comphy3 1>;
+		phy-names = "cp1-sata0-1-phy";
+	};
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&cp1_comphy2 {
+	cp1_usbh0_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&v_5v0_usb3_hst_vbus>;
+	};
+};
+
+&cp1_utmi {
+	status = "okay";
+};
+
+&cp1_usb3_0 {
+	/* CPS Lane 2 - CON7 */
+	phys = <&cp1_comphy2 0>, <&cp1_utmi0>;
+	phy-names = "cp1-usb3h0-comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
new file mode 100644
index 0000000000..42a60f3dd5
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Device Tree file for IEI Puzzle-M801
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "IEI-Puzzle-M801";
+	compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp1_eth0;
+		ethernet2 = &cp0_eth1;
+		ethernet3 = &cp0_eth2;
+		ethernet4 = &cp1_eth1;
+		ethernet5 = &cp1_eth2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	/* Regulator labels correspond with schematics */
+	v_3_3: regulator-3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_3_3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_xhci_vbus_pins>;
+		regulator-name = "v_5v0_usb3_hst_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	v_vddo_h: regulator-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_vddo_h";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	sfp_cp0_eth0: sfp-cp0-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpplus0_i2c>;
+		los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+
+	sfp_cp1_eth0: sfp-cp1-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpplus1_i2c>;
+		los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+		pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			/* SFP+ port 2: Activity */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <0>;
+			gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* SFP+ port 1: Activity */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <1>;
+			gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* SFP+ port 2: 10 Gbps indicator */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <2>;
+			gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* SFP+ port 2: 1 Gbps indicator */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <3>;
+			gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* SFP+ port 1: 10 Gbps indicator */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <4>;
+			gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			/* SFP+ port 1: 1 Gbps indicator */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <5>;
+			gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			linux,default-trigger = "disk-activity";
+			gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so add
+	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+	 */
+	marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_vddo_h>;
+};
+
+&ap_thermal_cpu1 {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <44000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+	cooling-maps {
+		fan-map {
+			trip = <&cpu_active>;
+			cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>,
+					<&chassis_fan_group1 64 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8010";
+		reg = <0x32>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+		partition@u-boot {
+			label = "u-boot";
+			reg = <0x00000000 0x001f0000>;
+		};
+		partition@u-boot-env {
+			label = "u-boot-env";
+			reg = <0x001f0000 0x00010000>;
+		};
+		partition@ubi1 {
+			label = "ubi1";
+			reg = <0x00200000 0x03f00000>;
+		};
+		partition@ubi2 {
+			label = "ubi2";
+			reg = <0x04100000 0x03f00000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&uart1 {
+	status = "okay";
+	/* IEI WT61P803 PUZZLE MCU Controller */
+	mcu {
+		compatible = "iei,wt61p803-puzzle";
+		current-speed = <115200>;
+		enable-beep;
+
+		leds {
+			compatible = "iei,wt61p803-puzzle-leds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				function = LED_FUNCTION_POWER;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+
+		hwmon {
+			compatible = "iei,wt61p803-puzzle-hwmon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			chassis_fan_group0:fan-group@0 {
+				#cooling-cells = <2>;
+				reg = <0x00>;
+				cooling-levels = <64 102 170 230 250>;
+			};
+
+			chassis_fan_group1:fan-group@1 {
+				#cooling-cells = <2>;
+				reg = <0x01>;
+				cooling-levels = <64 102 170 230 250>;
+			};
+		};
+	};
+};
+
+&cp0_rtc {
+	status = "disabled";
+};
+
+&cp0_i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+
+	sfpplus_gpio: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c04";
+		reg = <0x54>;
+	};
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		sfpplus0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		sfpplus1_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&cp0_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart1_pins>;
+	status = "okay";
+};
+
+&cp0_mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	ge_phy2: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ge_phy3: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_pins>;
+	num-lanes = <1>;
+	num-viewport = <8>;
+	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
+	phys = <&cp0_comphy0 0>;
+	phy-names = "cp0-pcie0-x1-phy";
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	cp0_ge_mdio_pins: ge-mdio-pins {
+		marvell,pins = "mpp32", "mpp34";
+		marvell,function = "ge";
+	};
+	cp0_i2c1_pins: i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+	cp0_i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+	cp0_uart1_pins: uart1-pins {
+		marvell,pins = "mpp40", "mpp41";
+		marvell,function = "uart1";
+	};
+	cp0_xhci_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	cp0_pcie_pins: pcie-pins {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+	cp0_sdhci_pins: sdhci-pins {
+		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+			       "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+	cp0_sfpplus_led_pins: sfpplus-led-pins {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy4 0>;
+	local-mac-address = [ae 00 00 00 ff 00];
+	sfp = <&sfp_cp0_eth0>;
+	managed = "in-band-status";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&ge_phy2>;
+	phy-mode = "sgmii";
+	local-mac-address = [ae 00 00 00 ff 01];
+	phys = <&cp0_comphy3 1>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phys = <&cp0_comphy1 2>;
+	local-mac-address = [ae 00 00 00 ff 02];
+	phy = <&ge_phy3>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	sata-port@0 {
+		phys = <&cp0_comphy2 0>;
+		phy-names = "cp0-sata0-0-phy";
+	};
+
+	sata-port@1 {
+		phys = <&cp0_comphy5 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+&cp0_sdhci0 {
+	broken-cd;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&cp1_i2c1 {
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	phys = <&cp1_comphy4 0>;
+	local-mac-address = [ae 00 00 00 ff 03];
+	sfp = <&sfp_cp1_eth0>;
+	managed = "in-band-status";
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy = <&ge_phy4>;
+	phy-mode = "sgmii";
+	local-mac-address = [ae 00 00 00 ff 04];
+	phys = <&cp1_comphy3 1>;
+};
+
+&cp1_eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	local-mac-address = [ae 00 00 00 ff 05];
+	phys = <&cp1_comphy5 2>;
+	phy = <&ge_phy5>;
+};
+
+&cp1_pinctrl {
+	cp1_sfpplus_led_pins: sfpplus-led-pins {
+		marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31";
+		marvell,function = "gpio";
+	};
+};
+
+&cp1_uart0 {
+	status = "disabled";
+};
+
+&cp1_comphy2 {
+	cp1_usbh0_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&v_5v0_usb3_hst_vbus>;
+	};
+};
+
+&cp1_usb3_0 {
+	phys = <&cp1_comphy2 0>;
+	phy-names = "cp1-usb3h0-comphy";
+	status = "okay";
+};
+
+&cp1_mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	ge_phy4: ethernet-phy@1 {
+		reg = <1>;
+	};
+	ge_phy5: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp1_pcie0 {
+	num-lanes = <2>;
+	phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
new file mode 100644
index 0000000000..22c2d6ebf3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and
+ * two CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+#include "armada-80x0.dtsi"
+
+/ {
+	model = "Marvell Armada 8040";
+	compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+&cp0_rtc {
+	status = "disabled";
+};
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
+
+&cp1_sata0 {
+	iommus = <&smmu 0x454>;
+};
+
+&cp1_usb3_0 {
+	iommus = <&smmu 0x450>;
+};
+
+&cp1_usb3_1 {
+	iommus = <&smmu 0x451>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
new file mode 100644
index 0000000000..4ba158f415
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada-8080 Development board platform
+ */
+
+#include "armada-8080.dtsi"
+
+/ {
+	model = "Marvell 8080 board";
+	compatible = "marvell,armada-8080-db", "marvell,armada-8080",
+		     "marvell,armada-ap810-octa", "marvell,armada-ap810";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&uart0_ap0 {
+	clock-frequency = <384000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
new file mode 100644
index 0000000000..299e814d1d
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA.
+ */
+
+#include "armada-ap810-ap0-octa-core.dtsi"
+
+/ {
+	model = "Marvell 8080 board";
+	compatible = "marvell,armada-8080", "marvell,armada-ap810-octa",
+				"marvell,armada-ap810";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
new file mode 100644
index 0000000000..ee67c70bf0
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 80x0 SoC family
+ */
+
+/ {
+	aliases {
+		gpio1 = &cp1_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+		spi3 = &cp1_spi0;
+		spi4 = &cp1_spi1;
+	};
+};
+
+/*
+ * Instantiate the master CP110
+ */
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/*
+ * Instantiate the slave CP110
+ */
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/* The 80x0 has two CP blocks, but uses only one block from each. */
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,armada-8k-cpm-pinctrl";
+	};
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,armada-8k-cps-pinctrl";
+
+		nand_pins: nand-pins {
+			marvell,pins =
+			"mpp0", "mpp1", "mpp2", "mpp3",
+			"mpp4", "mpp5", "mpp6", "mpp7",
+			"mpp8", "mpp9", "mpp10", "mpp11",
+			"mpp15", "mpp16", "mpp17", "mpp18",
+			"mpp19", "mpp20", "mpp21", "mpp22",
+			"mpp23", "mpp24", "mpp25", "mpp26",
+			"mpp27";
+			marvell,function = "dev";
+		};
+
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13", "mpp12";
+			marvell,function = "nf";
+		};
+	};
+};
+
+&cp1_crypto {
+	/*
+	 * The cryptographic engine found on the cp110
+	 * master is enabled by default at the SoC
+	 * level. Because it is not possible as of now
+	 * to enable two cryptographic engines in
+	 * parallel, disable this one by default.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
new file mode 100644
index 0000000000..3ed6fba1f4
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Dual";
+	compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	thermal-zones {
+		/delete-node/ ap-thermal-cpu2;
+		/delete-node/ ap-thermal-cpu3;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
new file mode 100644
index 0000000000..cf6a96ddcf
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Quad";
+	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
new file mode 100644
index 0000000000..866628679a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#define AP_NAME		ap806
+#include "armada-ap80x.dtsi"
+
+/ {
+	model = "Marvell Armada AP806";
+	compatible = "marvell,armada-ap806";
+};
+
+&ap_syscon0 {
+	ap_clk: clock {
+		compatible = "marvell,ap806-clock";
+		#clock-cells = <1>;
+	};
+};
+
+&ap_syscon1 {
+	cpu_clk: clock-cpu@278 {
+		compatible = "marvell,ap806-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+		reg = <0x278 0xa30>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
new file mode 100644
index 0000000000..8848238f95
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807 Quad
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#include "armada-ap807.dtsi"
+
+/ {
+	model = "Marvell Armada AP807 Quad";
+	compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
new file mode 100644
index 0000000000..4a23f65d47
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#define AP_NAME		ap807
+#include "armada-ap80x.dtsi"
+
+/ {
+	model = "Marvell Armada AP807";
+	compatible = "marvell,armada-ap807";
+};
+
+&ap_syscon0 {
+	ap_clk: clock {
+		compatible = "marvell,ap807-clock";
+		#clock-cells = <1>;
+	};
+};
+
+&ap_syscon1 {
+	cpu_clk: clock-cpu {
+		compatible = "marvell,ap807-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+	};
+};
+
+&ap_sdhci0 {
+	compatible = "marvell,armada-ap807-sdhci",
+		     "marvell,armada-ap806-sdhci"; /* Backward compatibility */
+};
+
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
new file mode 100644
index 0000000000..2c920e22ce
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP80x.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		gpio0 = &ap_gpio;
+		spi0 = &spi0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * This area matches the mapping done with a
+		 * mainline U-Boot, and should be updated by the
+		 * bootloader.
+		 */
+
+		psci-area@4000000 {
+			reg = <0x0 0x4000000 0x0 0x200000>;
+			no-map;
+		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
+	};
+
+	AP_NAME {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space@f0000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+			smmu: iommu@5000000 {
+				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
+				reg = <0x100000 0x100000>;
+				dma-coherent;
+				#iommu-cells = <1>;
+				#global-interrupts = <1>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gic: interrupt-controller@210000 {
+				compatible = "arm,gic-400";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				reg = <0x210000 0x10000>,
+				      <0x220000 0x20000>,
+				      <0x240000 0x20000>,
+				      <0x260000 0x20000>;
+
+				gic_v2m0: v2m@280000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x280000 0x1000>;
+					arm,msi-base-spi = <160>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m1: v2m@290000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x290000 0x1000>;
+					arm,msi-base-spi = <192>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m2: v2m@2a0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2a0000 0x1000>;
+					arm,msi-base-spi = <224>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m3: v2m@2b0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2b0000 0x1000>;
+					arm,msi-base-spi = <256>;
+					arm,msi-num-spis = <32>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			};
+
+			pmu {
+				compatible = "arm,cortex-a72-pmu";
+				interrupt-parent = <&pic>;
+				interrupts = <17>;
+			};
+
+			odmi: odmi@300000 {
+				compatible = "marvell,odmi-controller";
+				interrupt-controller;
+				msi-controller;
+				marvell,odmi-frames = <4>;
+				reg = <0x300000 0x4000>,
+				      <0x304000 0x4000>,
+				      <0x308000 0x4000>,
+				      <0x30C000 0x4000>;
+				marvell,spi-base = <128>, <136>, <144>, <152>;
+			};
+
+			gicp: gicp@3f0040 {
+				compatible = "marvell,ap806-gicp";
+				reg = <0x3f0040 0x10>;
+				marvell,spi-ranges = <64 64>, <288 64>;
+				msi-controller;
+			};
+
+			pic: interrupt-controller@3f0100 {
+				compatible = "marvell,armada-8k-pic";
+				reg = <0x3f0100 0x10>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sei: interrupt-controller@3f0200 {
+				compatible = "marvell,ap806-sei";
+				reg = <0x3f0200 0x40>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+			};
+
+			xor@400000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@420000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@440000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@460000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			spi0: spi@510600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x510600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@511000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x511000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			uart0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			uart1: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+
+			};
+
+			watchdog: watchdog@610000 {
+				compatible = "arm,sbsa-gwdt";
+				reg = <0x610000 0x1000>, <0x600000 0x1000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ap_sdhci0: mmc@6e0000 {
+				compatible = "marvell,armada-ap806-sdhci";
+				reg = <0x6e0000 0x300>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&ap_clk 4>;
+				dma-coherent;
+				marvell,xenon-phy-slow-mode;
+				status = "disabled";
+			};
+
+			ap_syscon0: system-controller@6f4000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x6f4000 0x2000>;
+
+				ap_pinctrl: pinctrl {
+					compatible = "marvell,ap806-pinctrl";
+
+					uart0_pins: uart0-pins {
+						marvell,pins = "mpp11", "mpp19";
+						marvell,function = "uart0";
+					};
+				};
+
+				ap_gpio: gpio@1040 {
+					compatible = "marvell,armada-8k-gpio";
+					offset = <0x1040>;
+					ngpios = <20>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&ap_pinctrl 0 0 20>;
+					marvell,pwm-offset = <0x10c0>;
+					#pwm-cells = <2>;
+					clocks = <&ap_clk 3>;
+				};
+			};
+
+			ap_syscon1: system-controller@6f8000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x6f8000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				ap_thermal: thermal-sensor@80 {
+					compatible = "marvell,armada-ap806-thermal";
+					reg = <0x80 0x10>;
+					interrupt-parent = <&sei>;
+					interrupts = <18>;
+					#thermal-sensor-cells = <1>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * The thermal IP features one internal sensor plus, if applicable, one
+	 * remote channel wired to one sensor per CPU.
+	 *
+	 * Only one thermal zone per AP/CP may trigger interrupts at a time, the
+	 * first one that will have a critical trip point will be chosen.
+	 */
+	thermal-zones {
+		ap_thermal_ic: ap-ic-thermal {
+			polling-delay-passive = <0>; /* Interrupt driven */
+			polling-delay = <0>; /* Interrupt driven */
+
+			thermal-sensors = <&ap_thermal 0>;
+
+			trips {
+				ap_crit: ap-crit {
+					temperature = <100000>; /* mC degrees */
+					hysteresis = <2000>; /* mC degrees */
+					type = "critical";
+				};
+			};
+
+			cooling-maps { };
+		};
+
+		ap_thermal_cpu0: ap-cpu0-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 1>;
+
+			trips {
+				cpu0_hot: cpu0-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_emerg: cpu0-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0_hot: map0-hot {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 1 2>,
+						<&cpu1 1 2>;
+				};
+				map0_emerg: map0-ermerg {
+					trip = <&cpu0_emerg>;
+					cooling-device = <&cpu0 3 3>,
+						<&cpu1 3 3>;
+				};
+			};
+		};
+
+		ap_thermal_cpu1: ap-cpu1-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 2>;
+
+			trips {
+				cpu1_hot: cpu1-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_emerg: cpu1-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map1_hot: map1-hot {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu0 1 2>,
+						<&cpu1 1 2>;
+				};
+				map1_emerg: map1-emerg {
+					trip = <&cpu1_emerg>;
+					cooling-device = <&cpu0 3 3>,
+						<&cpu1 3 3>;
+				};
+			};
+		};
+
+		ap_thermal_cpu2: ap-cpu2-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 3>;
+
+			trips {
+				cpu2_hot: cpu2-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_emerg: cpu2-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map2_hot: map2-hot {
+					trip = <&cpu2_hot>;
+					cooling-device = <&cpu2 1 2>,
+						<&cpu3 1 2>;
+				};
+				map2_emerg: map2-emerg {
+					trip = <&cpu2_emerg>;
+					cooling-device = <&cpu2 3 3>,
+						<&cpu3 3 3>;
+				};
+			};
+		};
+
+		ap_thermal_cpu3: ap-cpu3-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 4>;
+
+			trips {
+				cpu3_hot: cpu3-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_emerg: cpu3-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map3_hot: map3-bhot {
+					trip = <&cpu3_hot>;
+					cooling-device = <&cpu2 1 2>,
+						<&cpu3 1 2>;
+				};
+				map3_emerg: map3-emerg {
+					trip = <&cpu3_emerg>;
+					cooling-device = <&cpu2 3 3>,
+						<&cpu3 3 3>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
new file mode 100644
index 0000000000..d1a7143ef3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP810 OCTA cores.
+ */
+
+#include "armada-ap810-ap0.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "marvell,armada-ap810-octa";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+		cpu4: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+		cpu5: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x201>;
+			enable-method = "psci";
+		};
+		cpu6: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+		cpu7: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x301>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
new file mode 100644
index 0000000000..2f9ab6b4a2
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP810.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	model = "Marvell Armada AP810";
+	compatible = "marvell,armada-ap810";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0_ap0;
+		serial1 = &uart1_ap0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	ap810-ap0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space@e8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xe8000000 0x4000000>;
+			interrupt-parent = <&gic>;
+
+			gic: interrupt-controller@3000000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+
+				reg = <0x3000000 0x10000>,	/* GICD */
+				      <0x3060000 0x100000>,	/* GICR */
+				      <0x00c0000 0x2000>,	/* GICC */
+				      <0x00d0000 0x1000>,	/* GICH */
+				      <0x00e0000 0x2000>;	/* GICV */
+
+				gic_its_ap0: msi-controller@3040000 {
+					compatible = "arm,gic-v3-its";
+					msi-controller;
+					#msi-cells = <1>;
+					reg = <0x3040000 0x20000>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			xor@400000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa0>;
+				dma-coherent;
+			};
+
+			xor@420000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa1>;
+				dma-coherent;
+			};
+
+			xor@440000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa2>;
+				dma-coherent;
+			};
+
+			xor@460000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa3>;
+				dma-coherent;
+			};
+
+			uart0_ap0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				status = "disabled";
+			};
+
+			uart1_ap0: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi
new file mode 100644
index 0000000000..c04c6c4750
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ */
+
+/* Common definitions used by Armada 7K/8K DTs */
+#define PASTER(x, y) x ## y
+#define EVALUATOR(x, y) PASTER(x, y)
+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
+#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
new file mode 100644
index 0000000000..4fd33b0fa5
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP110.
+ */
+
+#define CP11X_TYPE cp110
+
+#include "armada-cp11x.dtsi"
+
+#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
new file mode 100644
index 0000000000..1d0a9653e6
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP115.
+ */
+
+#define CP11X_TYPE cp115
+
+#include "armada-cp11x.dtsi"
+
+#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
new file mode 100644
index 0000000000..4ec1aae0a3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP11x.
+ */
+
+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "armada-common.dtsi"
+
+#define CP11X_PCIEx_CONF_BASE(iface)	(CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface))
+
+/ {
+	/*
+	 * The contents of the node are defined below, in order to
+	 * save one indentation level
+	 */
+	CP11X_NAME: CP11X_NAME { };
+
+	/*
+	 * CPs only have one sensor in the thermal IC.
+	 *
+	 * The cooling maps are empty as there are no cooling devices.
+	 */
+	thermal-zones {
+		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) {
+			polling-delay-passive = <0>; /* Interrupt driven */
+			polling-delay = <0>; /* Interrupt driven */
+
+			thermal-sensors = <&CP11X_LABEL(thermal) 0>;
+
+			trips {
+				CP11X_LABEL(crit): crit {
+					temperature = <100000>; /* mC degrees */
+					hysteresis = <2000>; /* mC degrees */
+					type = "critical";
+				};
+			};
+
+			cooling-maps { };
+		};
+	};
+};
+
+&CP11X_NAME {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "simple-bus";
+	interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
+	ranges;
+
+	config-space@CP11X_BASE {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
+
+		CP11X_LABEL(ethernet): ethernet@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,armada-7k-pp22";
+			reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
+			clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
+				 <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+				 <&CP11X_LABEL(clk) 1 18>;
+			clock-names = "pp_clk", "gop_clk",
+				      "mg_clk", "mg_core_clk", "axi_clk";
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			status = "disabled";
+			dma-coherent;
+
+			CP11X_LABEL(eth0): ethernet-port@0 {
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+					<43 IRQ_TYPE_LEVEL_HIGH>,
+					<47 IRQ_TYPE_LEVEL_HIGH>,
+					<51 IRQ_TYPE_LEVEL_HIGH>,
+					<55 IRQ_TYPE_LEVEL_HIGH>,
+					<59 IRQ_TYPE_LEVEL_HIGH>,
+					<63 IRQ_TYPE_LEVEL_HIGH>,
+					<67 IRQ_TYPE_LEVEL_HIGH>,
+					<71 IRQ_TYPE_LEVEL_HIGH>,
+					<129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "hif5", "hif6", "hif7",
+					"hif8", "link";
+				reg = <0>;
+				port-id = <0>; /* For backward compatibility. */
+				gop-port-id = <0>;
+				status = "disabled";
+			};
+
+			CP11X_LABEL(eth1): ethernet-port@1 {
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+					<44 IRQ_TYPE_LEVEL_HIGH>,
+					<48 IRQ_TYPE_LEVEL_HIGH>,
+					<52 IRQ_TYPE_LEVEL_HIGH>,
+					<56 IRQ_TYPE_LEVEL_HIGH>,
+					<60 IRQ_TYPE_LEVEL_HIGH>,
+					<64 IRQ_TYPE_LEVEL_HIGH>,
+					<68 IRQ_TYPE_LEVEL_HIGH>,
+					<72 IRQ_TYPE_LEVEL_HIGH>,
+					<128 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "hif5", "hif6", "hif7",
+					"hif8", "link";
+				reg = <1>;
+				port-id = <1>; /* For backward compatibility. */
+				gop-port-id = <2>;
+				status = "disabled";
+			};
+
+			CP11X_LABEL(eth2): ethernet-port@2 {
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+					<45 IRQ_TYPE_LEVEL_HIGH>,
+					<49 IRQ_TYPE_LEVEL_HIGH>,
+					<53 IRQ_TYPE_LEVEL_HIGH>,
+					<57 IRQ_TYPE_LEVEL_HIGH>,
+					<61 IRQ_TYPE_LEVEL_HIGH>,
+					<65 IRQ_TYPE_LEVEL_HIGH>,
+					<69 IRQ_TYPE_LEVEL_HIGH>,
+					<73 IRQ_TYPE_LEVEL_HIGH>,
+					<127 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "hif5", "hif6", "hif7",
+					"hif8", "link";
+				reg = <2>;
+				port-id = <2>; /* For backward compatibility. */
+				gop-port-id = <3>;
+				status = "disabled";
+			};
+		};
+
+		CP11X_LABEL(comphy): phy@120000 {
+			compatible = "marvell,comphy-cp110";
+			reg = <0x120000 0x6000>;
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+				 <&CP11X_LABEL(clk) 1 18>;
+			clock-names = "mg_clk", "mg_core_clk", "axi_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			CP11X_LABEL(comphy0): phy@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy1): phy@1 {
+				reg = <1>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy2): phy@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy3): phy@3 {
+				reg = <3>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy4): phy@4 {
+				reg = <4>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy5): phy@5 {
+				reg = <5>;
+				#phy-cells = <1>;
+			};
+		};
+
+		CP11X_LABEL(mdio): mdio@12a200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,orion-mdio";
+			reg = <0x12a200 0x10>;
+			clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>,
+				 <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(xmdio): mdio@12a600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,xmdio";
+			reg = <0x12a600 0x10>;
+			clocks = <&CP11X_LABEL(clk) 1 5>,
+				 <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(icu): interrupt-controller@1e0000 {
+			compatible = "marvell,cp110-icu";
+			reg = <0x1e0000 0x440>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			CP11X_LABEL(icu_nsr): interrupt-controller@10 {
+				compatible = "marvell,cp110-icu-nsr";
+				reg = <0x10 0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				msi-parent = <&gicp>;
+			};
+
+			CP11X_LABEL(icu_sei): interrupt-controller@50 {
+				compatible = "marvell,cp110-icu-sei";
+				reg = <0x50 0x10>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				msi-parent = <&sei>;
+			};
+		};
+
+		CP11X_LABEL(rtc): rtc@284000 {
+			compatible = "marvell,armada-8k-rtc";
+			reg = <0x284000 0x20>, <0x284080 0x24>;
+			reg-names = "rtc", "rtc-soc";
+			interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		CP11X_LABEL(syscon0): system-controller@440000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x440000 0x2000>;
+
+			CP11X_LABEL(clk): clock {
+				compatible = "marvell,cp110-clock";
+				#clock-cells = <2>;
+			};
+
+			CP11X_LABEL(gpio1): gpio@100 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x100>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
+				marvell,pwm-offset = <0x1f0>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+					<85 IRQ_TYPE_LEVEL_HIGH>,
+					<84 IRQ_TYPE_LEVEL_HIGH>,
+					<83 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				clock-names = "core", "axi";
+				clocks = <&CP11X_LABEL(clk) 1 21>,
+					 <&CP11X_LABEL(clk) 1 17>;
+				status = "disabled";
+			};
+
+			CP11X_LABEL(gpio2): gpio@140 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x140>;
+				ngpios = <31>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
+				marvell,pwm-offset = <0x1f0>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+					<81 IRQ_TYPE_LEVEL_HIGH>,
+					<80 IRQ_TYPE_LEVEL_HIGH>,
+					<79 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				clock-names = "core", "axi";
+				clocks = <&CP11X_LABEL(clk) 1 21>,
+					 <&CP11X_LABEL(clk) 1 17>;
+				status = "disabled";
+			};
+		};
+
+		CP11X_LABEL(syscon1): system-controller@400000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x400000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			CP11X_LABEL(thermal): thermal-sensor@70 {
+				compatible = "marvell,armada-cp110-thermal";
+				reg = <0x70 0x10>;
+				interrupts-extended =
+					<&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		CP11X_LABEL(utmi): utmi@580000 {
+			compatible = "marvell,cp110-utmi-phy";
+			reg = <0x580000 0x2000>;
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			CP11X_LABEL(utmi0): usb-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			CP11X_LABEL(utmi1): usb-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		CP11X_LABEL(usb3_0): usb@500000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x500000 0x4000>;
+			dma-coherent;
+			interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 22>,
+				 <&CP11X_LABEL(clk) 1 16>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(usb3_1): usb@510000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x510000 0x4000>;
+			dma-coherent;
+			interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 23>,
+				 <&CP11X_LABEL(clk) 1 16>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(sata0): sata@540000 {
+			compatible = "marvell,armada-8k-ahci",
+			"generic-ahci";
+			reg = <0x540000 0x30000>;
+			dma-coherent;
+			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP11X_LABEL(clk) 1 15>,
+				 <&CP11X_LABEL(clk) 1 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata-port@0 {
+				reg = <0>;
+			};
+
+			sata-port@1 {
+				reg = <1>;
+			};
+		};
+
+		CP11X_LABEL(xor0): xor@6a0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 8>,
+				 <&CP11X_LABEL(clk) 1 14>;
+		};
+
+		CP11X_LABEL(xor1): xor@6c0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 7>,
+				 <&CP11X_LABEL(clk) 1 14>;
+		};
+
+		CP11X_LABEL(spi0): spi@700600 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700600 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clock-names = "core", "axi";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(spi1): spi@700680 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-names = "core", "axi";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(i2c0): i2c@701000 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(i2c1): i2c@701100 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart0): serial@702000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702000 0x100>;
+			reg-shift = <2>;
+			interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart1): serial@702100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702100 0x100>;
+			reg-shift = <2>;
+			interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart2): serial@702200 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702200 0x100>;
+			reg-shift = <2>;
+			interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart3): serial@702300 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702300 0x100>;
+			reg-shift = <2>;
+			interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(nand_controller): nand-controller@720000 {
+			/*
+			 * Due to the limitation of the pins available
+			 * this controller is only usable on the CPM
+			 * for A7K and on the CPS for A8K.
+			 */
+			compatible = "marvell,armada-8k-nand-controller",
+				"marvell,armada370-nand-controller";
+			reg = <0x720000 0x54>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 2>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(trng): trng@760000 {
+			compatible = "marvell,armada-8k-rng",
+			"inside-secure,safexcel-eip76";
+			reg = <0x760000 0x7d>;
+			interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 25>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "okay";
+		};
+
+		CP11X_LABEL(sdhci0): mmc@780000 {
+			compatible = "marvell,armada-cp110-sdhci";
+			reg = <0x780000 0x300>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "axi";
+			clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(crypto): crypto@800000 {
+			compatible = "inside-secure,safexcel-eip197b";
+			reg = <0x800000 0x200000>;
+			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+				<88 IRQ_TYPE_LEVEL_HIGH>,
+				<89 IRQ_TYPE_LEVEL_HIGH>,
+				<90 IRQ_TYPE_LEVEL_HIGH>,
+				<91 IRQ_TYPE_LEVEL_HIGH>,
+				<92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mem", "ring0", "ring1",
+				"ring2", "ring3", "eip";
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 26>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			dma-coherent;
+		};
+	};
+
+	CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
+		      <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		/* non-prefetchable memory */
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+
+	CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
+		      <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		/* non-prefetchable memory */
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+
+	CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
+		      <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		/* non-prefetchable memory */
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts
new file mode 100644
index 0000000000..a7b6dfba8a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130-crb.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-CRB-A";
+};
+
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <4>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 0
+		&cp0_comphy1 0
+		&cp0_comphy2 0
+		&cp0_comphy3 0>;
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
new file mode 100644
index 0000000000..0904cb0309
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130-crb.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-CRB-B";
+};
+
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <1>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 0>;
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+	sata-port@0 {
+		status = "okay";
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp0_comphy2 0>;
+	};
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	phys = <&cp0_comphy1 0>;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	phys = <&cp0_comphy3 1>;
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
new file mode 100644
index 0000000000..47d45ff3d6
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130.dtsi" /* include SoC device tree */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "ap0_mmc_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&expander0 5 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+
+	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy0: cp0_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+	};
+
+	cp0_usb3_0_phy1: cp0_usb3_phy1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_vbus1>;
+	};
+
+	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "cp0_sd_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&cp0_gpio2 18 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+
+	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0_sd_vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>;
+		los-gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* on-board eMMC U6 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	status = "okay";
+	mmc-ddr-1_8v;
+	vqmmc-supply = <&ap0_reg_mmc_vccq>;
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_sdhci_cd_pins_crb: cp0-sdhci-cd-pins-crb {
+			marvell,pins = "mpp55";
+			marvell,function = "gpio";
+		};
+		cp0_sdhci_pins: cp0-sdhi-pins-0 {
+			marvell,pins = "mpp56", "mpp57", "mpp58",
+				       "mpp59", "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+		cp0_spi1_pins: cp0-spi-pins-1 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+	};
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	expander0: mcp23x17@20 {
+		compatible = "microchip,mcp23017";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+		status = "okay";
+	};
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+
+&cp0_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins
+		     &cp0_sdhci_cd_pins_crb>;
+	bus-width = <4>;
+	cd-gpios = <&cp0_gpio2 23 GPIO_ACTIVE_HIGH>;
+	vqmmc-supply = <&cp0_reg_sd_vccq>;
+	vmmc-supply = <&cp0_reg_sd_vcc>;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	reg = <0x700680 0x50>,		/* control */
+	      <0x2000000 0x1000000>;	/* CS0 */
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	switch6: switch0@6 {
+		/* Actual device is MV88E6393X */
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <6>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "p1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "p2";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "p3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "p4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "p5";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "p6";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "p7";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "p8";
+				phy-handle = <&switch0phy8>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "p9";
+				phy-mode = "10gbase-r";
+				sfp = <&sfp>;
+				managed = "in-band-status";
+			};
+
+			port@a {
+				reg = <10>;
+				ethernet = <&cp0_eth0>;
+				phy-mode = "10gbase-r";
+				managed = "in-band-status";
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+	};
+};
+
+&cp0_xmdio {
+	status = "okay";
+	nbaset_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	/* This port is connected to 88E6393X switch */
+	status = "okay";
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	phys = <&cp0_comphy4 0>;
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	/* This port uses "2500base-t" phy-mode */
+	status = "disabled";
+	phy = <&nbaset_phy0>;
+	phys = <&cp0_comphy5 2>;
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-B.dts b/arch/arm64/boot/dts/marvell/cn9130-db-B.dts
new file mode 100644
index 0000000000..57e41cacd4
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db-B.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board (setup "B").
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB setup B";
+};
+
+/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
+ */
+
+&cp0_nand_controller {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts
new file mode 100644
index 0000000000..994f347f29
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB setup A";
+};
+
+/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When SPI controller is enabled, NAND should be disabled.
+ */
+
+&cp0_spi1 {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
new file mode 100644
index 0000000000..6eb6a175de
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		i2c0 = &cp0_i2c0;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "ap0_sd_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1 3300000 0x0>;
+	};
+
+	cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_vbus0>;
+	};
+
+	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_vbus1>;
+	};
+
+	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "cp0_sd_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+
+	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0_sd_vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	cp0_sfp_eth0: sfp-eth@0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_sfpp0_i2c>;
+		los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		/*
+		 * SFP cages are unconnected on early PCBs because of an the I2C
+		 * lanes not being connected. Prevent the port for being
+		 * unusable by disabling the SFP node.
+		 */
+		status = "disabled";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	vqmmc-supply = <&ap0_reg_sd_vccq>;
+	status = "okay";
+};
+
+&cp0_crypto {
+	status = "disabled";
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&cp0_sfp_eth0>;
+};
+
+/* CON56 */
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+/* CON57 */
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+
+	/* U36 */
+	expander0: pca953x@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+		status = "okay";
+	};
+
+	/* U42 */
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <0x20>;
+	};
+
+	/* U38 */
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <0x20>;
+	};
+};
+
+&cp0_i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/* SLM-1521-V2 - U3 */
+	i2c-mux@72 { /* verify address - depends on dpr */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		cp0_sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* U12 */
+			cp0_module_expander1: pca9555@21 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x21>;
+			};
+
+		};
+	};
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+/* U54 */
+&cp0_nand_controller {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_rb>;
+
+	nand@0 {
+		reg = <0>;
+		label = "main-storage";
+		nand-rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@200000 {
+				label = "Linux";
+				reg = <0x200000 0xe00000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <4>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 0
+		&cp0_comphy1 0
+		&cp0_comphy2 0
+		&cp0_comphy3 0>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	/* SLM-1521-V2, CON2 */
+	sata-port@1 {
+		status = "okay";
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp0_comphy5 1>;
+	};
+};
+
+/* CON 28 */
+&cp0_sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins
+		     &cp0_sdhci_cd_pins>;
+	bus-width = <4>;
+	cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	vqmmc-supply = <&cp0_reg_sd_vccq>;
+	vmmc-supply = <&cp0_reg_sd_vcc>;
+};
+
+/* U55 */
+&cp0_spi1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	reg = <0x700680 0x50>;
+
+	flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot-0";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem-0";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+			marvell,pins = "mpp0", "mpp1", "mpp2",
+				       "mpp3", "mpp4", "mpp5",
+				       "mpp6", "mpp7", "mpp8",
+				       "mpp9", "mpp10", "mpp11";
+			marvell,function = "ge0";
+		};
+		cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+			marvell,pins = "mpp44", "mpp45", "mpp46",
+				       "mpp47", "mpp48", "mpp49",
+				       "mpp50", "mpp51", "mpp52",
+				       "mpp53", "mpp54", "mpp55";
+			marvell,function = "ge1";
+		};
+		cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 {
+			marvell,pins = "mpp43";
+			marvell,function = "gpio";
+		};
+		cp0_sdhci_pins: cp0-sdhi-pins-0 {
+			marvell,pins = "mpp56", "mpp57", "mpp58",
+				       "mpp59", "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+		cp0_spi1_pins: cp0-spi-pins-1 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		nand_pins: nand-pins {
+			marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18",
+				       "mpp19", "mpp20", "mpp21", "mpp22",
+				       "mpp23", "mpp24", "mpp25", "mpp26",
+				       "mpp27";
+			marvell,function = "dev";
+		};
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13";
+			marvell,function = "nf";
+		};
+	};
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi
new file mode 100644
index 0000000000..327b041341
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130 SoC.
+ */
+
+#include "armada-ap807-quad.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130 SoC";
+	compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
+		     "marvell,armada-ap807";
+
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
+};
+
+/*
+ * Instantiate the internal CP115
+ */
+
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \
+						    0xe0000000 + ((iface - 1) * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000)
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-B.dts b/arch/arm64/boot/dts/marvell/cn9131-db-B.dts
new file mode 100644
index 0000000000..183b1ec8b1
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db-B.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board (setup "B").
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB setup B";
+};
+
+/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
+ */
+
+&cp0_nand_controller {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts
new file mode 100644
index 0000000000..a60fdee79b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB setup A";
+};
+
+/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When SPI controller is enabled, NAND should be disabled.
+ */
+
+&cp0_spi1 {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
new file mode 100644
index 0000000000..ff8422fae3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	compatible = "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	aliases {
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		ethernet3 = &cp1_eth0;
+		ethernet4 = &cp1_eth1;
+	};
+
+	cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_xhci0_vbus_pins>;
+		regulator-name = "cp1-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp1_usb3_0_phy0: cp1_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp1_reg_usb3_vbus0>;
+	};
+
+	cp1_sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp1_i2c0>;
+		los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfp_pins>;
+		/*
+		 * SFP cages are unconnected on early PCBs because of an the I2C
+		 * lanes not being connected. Prevent the port for being
+		 * unusable by disabling the SFP node.
+		 */
+		status = "disabled";
+	};
+};
+
+/*
+ * Instantiate the first slave CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+	status = "disabled";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&cp1_sfp_eth1>;
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+/* CON40 */
+&cp1_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_pcie_reset_pins>;
+	num-lanes = <2>;
+	num-viewport = <8>;
+	marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy0 0
+		&cp1_comphy1 0>;
+};
+
+&cp1_sata0 {
+	status = "okay";
+
+	/* CON32 */
+	sata-port@1 {
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp1_comphy5 1>;
+	};
+};
+
+/* U24 */
+&cp1_spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi0_pins>;
+	reg = <0x700680 0x50>;
+
+	flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot-1";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem-1";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp1_i2c0_pins: cp1-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp1_spi0_pins: cp1-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+		cp1_sfp_pins: sfp-pins {
+			marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
+			marvell,function = "gpio";
+		};
+		cp1_pcie_reset_pins: cp1-pcie-reset-pins {
+			marvell,pins = "mpp0";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/* CON58 */
+&cp1_utmi {
+	status = "okay";
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp1_usb3_0_phy0>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy3 1>, <&cp1_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db-B.dts b/arch/arm64/boot/dts/marvell/cn9132-db-B.dts
new file mode 100644
index 0000000000..7137a6f22d
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-db-B.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9132-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9132-DB setup B";
+};
+
+/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
+ */
+
+&cp0_nand_controller {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts
new file mode 100644
index 0000000000..1f2e6377af
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9132-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9132-DB setup A";
+};
+
+/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When SPI controller is enabled, NAND should be disabled.
+ */
+
+&cp0_spi1 {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
new file mode 100644
index 0000000000..512a4fa286
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	aliases {
+		gpio5 = &cp2_gpio1;
+		gpio6 = &cp2_gpio2;
+		ethernet5 = &cp2_eth0;
+	};
+
+	cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy0: cp2_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus0>;
+	};
+
+	cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy1: cp2_usb3_phy1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus1>;
+	};
+
+	cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "cp2_sd_vcc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1 3300000 0x0>;
+	};
+
+	cp2_sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp2_sfpp0_i2c>;
+		los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		/*
+		 * SFP cages are unconnected on early PCBs because of an the I2C
+		 * lanes not being connected. Prevent the port for being
+		 * unusable by disabling the SFP node.
+		 */
+		status = "disabled";
+	};
+};
+
+/*
+ * Instantiate the second slave CP115
+ */
+
+#define CP11X_NAME		cp2
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp2_crypto {
+	status = "disabled";
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+	status = "disabled";
+	phy-mode = "10gbase-r";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&cp2_sfp_eth0>;
+};
+
+&cp2_gpio1 {
+	status = "okay";
+};
+
+&cp2_gpio2 {
+	status = "okay";
+};
+
+&cp2_i2c0 {
+	clock-frequency = <100000>;
+
+	/* SLM-1521-V2 - U3 */
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		cp2_sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* U12 */
+			cp2_module_expander1: pca9555@21 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x21>;
+			};
+		};
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp2_pcie0 {
+	status = "okay";
+	num-lanes = <2>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy0 0
+		&cp2_comphy1 0>;
+};
+
+/* SLM-1521-V2, CON8 */
+&cp2_pcie2 {
+	status = "okay";
+	num-lanes = <1>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy5 2>;
+};
+
+&cp2_sata0 {
+	status = "okay";
+
+	/* SLM-1521-V2, CON4 */
+	sata-port@0 {
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp2_comphy2 0>;
+	};
+};
+
+/* CON 2 on SLM-1683 - microSD */
+&cp2_sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_sdhci_pins>;
+	bus-width = <4>;
+	cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&cp2_reg_sd_vccq>;
+};
+
+&cp2_syscon0 {
+	cp2_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp2_i2c0_pins: cp2-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp2_sdhci_pins: cp2-sdhi-pins-0 {
+			marvell,pins = "mpp56", "mpp57", "mpp58",
+				       "mpp59", "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+	};
+};
+
+&cp2_utmi {
+	status = "okay";
+};
+
+&cp2_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp2_usb3_0_phy0>;
+	phys = <&cp2_utmi0>;
+	phy-names = "usb";
+	dr_mode = "host";
+};
+
+/* SLM-1521-V2, CON11 */
+&cp2_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp2_usb3_0_phy1>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy3 1>, <&cp2_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
new file mode 100644
index 0000000000..c99c3372a4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-sony-xperia-m5.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-burnet.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-cozmo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-damu.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku6.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku7.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14-sku2.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
new file mode 100644
index 0000000000..fffdb7bbf8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -0,0 +1,237 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt2712e.dtsi"
+
+/ {
+	model = "MediaTek MT2712 evaluation board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vproc_buck0";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vproc_buck1";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	extcon_usb: extcon_iddig {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb1: extcon_iddig1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb_p0_vbus: regulator-usb-p0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "p0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p1_vbus: regulator-usb-p1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "p1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p2_vbus: regulator-usb-p2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "p2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p3_vbus: regulator-usb-p3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "p3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&cpus_fixed_vproc0>;
+};
+
+&cpu1 {
+	proc-supply = <&cpus_fixed_vproc0>;
+};
+
+&cpu2 {
+	proc-supply = <&cpus_fixed_vproc1>;
+};
+
+&eth {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethernet_phy0>;
+	mediatek,tx-delay-ps = <1530>;
+	snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+	snps,reset-delays-us = <0 10000 10000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default>;
+	pinctrl-1 = <&eth_sleep>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@5 {
+			compatible = "ethernet-phy-id0243.0d90";
+			reg = <0x5>;
+		};
+	};
+};
+
+&pio {
+	eth_default: eth_default {
+		tx_pins {
+			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
+				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
+				 <MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1>,
+				 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
+				 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
+				 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+		rx_pins {
+			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
+				 <MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2>,
+				 <MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1>,
+				 <MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0>,
+				 <MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV>,
+				 <MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC>;
+			input-enable;
+		};
+		mdio_pins {
+			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
+				 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			input-enable;
+		};
+	};
+
+	eth_sleep: eth_sleep {
+		tx_pins {
+			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
+				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
+				 <MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73>,
+				 <MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74>,
+				 <MT2712_PIN_75_GBE_TXC__FUNC_GPIO75>,
+				 <MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76>;
+		};
+		rx_pins {
+			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78>,
+				 <MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79>,
+				 <MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80>,
+				 <MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81>,
+				 <MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82>,
+				 <MT2712_PIN_84_GBE_RXC__FUNC_GPIO84>;
+			input-disable;
+		};
+		mdio_pins {
+			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GPIO85>,
+				 <MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86>;
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	usb0_id_pins_float: usb0_iddig {
+		pins_iddig {
+			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
+			bias-pull-up;
+		};
+	};
+
+	usb1_id_pins_float: usb1_iddig {
+		pins_iddig {
+			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ssusb {
+	vbus-supply = <&usb_p0_vbus>;
+	extcon = <&extcon_usb>;
+	dr_mode = "otg";
+	wakeup-source;
+	mediatek,u3p-dis-msk = <0x1>;
+	//enable-manual-drd;
+	//maximum-speed = "full-speed";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_float>;
+	status = "okay";
+};
+
+&ssusb1 {
+	vbus-supply = <&usb_p1_vbus>;
+	extcon = <&extcon_usb1>;
+	dr_mode = "otg";
+	//mediatek,u3p-dis-msk = <0x1>;
+	enable-manual-drd;
+	wakeup-source;
+	//maximum-speed = "full-speed";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_id_pins_float>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host0 {
+	vbus-supply = <&usb_p2_vbus>;
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h
new file mode 100644
index 0000000000..385c455a7c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h
@@ -0,0 +1,1123 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Zhiyong Tao <zhiyong.tao@mediatek.com>
+ *
+ */
+#ifndef __DTS_MT2712_PINFUNC_H
+#define __DTS_MT2712_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT2712_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT2712_PIN_0_EINT0__FUNC_EINT0 (MTK_PIN_NO(0) | 1)
+#define MT2712_PIN_0_EINT0__FUNC_MBIST_DIAG_SCANOUT (MTK_PIN_NO(0) | 2)
+#define MT2712_PIN_0_EINT0__FUNC_DSIA_TE (MTK_PIN_NO(0) | 3)
+#define MT2712_PIN_0_EINT0__FUNC_DSIC_TE (MTK_PIN_NO(0) | 4)
+#define MT2712_PIN_0_EINT0__FUNC_DIN_D3 (MTK_PIN_NO(0) | 5)
+#define MT2712_PIN_0_EINT0__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(0) | 6)
+
+#define MT2712_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT2712_PIN_1_EINT1__FUNC_EINT1 (MTK_PIN_NO(1) | 1)
+#define MT2712_PIN_1_EINT1__FUNC_IR_IN (MTK_PIN_NO(1) | 2)
+#define MT2712_PIN_1_EINT1__FUNC_DSIB_TE (MTK_PIN_NO(1) | 3)
+#define MT2712_PIN_1_EINT1__FUNC_DSID_TE (MTK_PIN_NO(1) | 4)
+#define MT2712_PIN_1_EINT1__FUNC_DIN_D4 (MTK_PIN_NO(1) | 5)
+
+#define MT2712_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT2712_PIN_2_EINT2__FUNC_EINT2 (MTK_PIN_NO(2) | 1)
+#define MT2712_PIN_2_EINT2__FUNC_IR_IN (MTK_PIN_NO(2) | 2)
+#define MT2712_PIN_2_EINT2__FUNC_LCM_RST1 (MTK_PIN_NO(2) | 3)
+#define MT2712_PIN_2_EINT2__FUNC_DIN_D5 (MTK_PIN_NO(2) | 5)
+
+#define MT2712_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT2712_PIN_3_EINT3__FUNC_EINT3 (MTK_PIN_NO(3) | 1)
+#define MT2712_PIN_3_EINT3__FUNC_IR_IN (MTK_PIN_NO(3) | 2)
+#define MT2712_PIN_3_EINT3__FUNC_LCM_RST0 (MTK_PIN_NO(3) | 3)
+#define MT2712_PIN_3_EINT3__FUNC_DIN_D6 (MTK_PIN_NO(3) | 5)
+
+#define MT2712_PIN_4_PWM0__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT2712_PIN_4_PWM0__FUNC_PWM0 (MTK_PIN_NO(4) | 1)
+#define MT2712_PIN_4_PWM0__FUNC_DISP0_PWM (MTK_PIN_NO(4) | 2)
+#define MT2712_PIN_4_PWM0__FUNC_DISP1_PWM (MTK_PIN_NO(4) | 3)
+#define MT2712_PIN_4_PWM0__FUNC_DIN_CLK (MTK_PIN_NO(4) | 5)
+
+#define MT2712_PIN_5_PWM1__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT2712_PIN_5_PWM1__FUNC_PWM1 (MTK_PIN_NO(5) | 1)
+#define MT2712_PIN_5_PWM1__FUNC_DISP1_PWM (MTK_PIN_NO(5) | 2)
+#define MT2712_PIN_5_PWM1__FUNC_DISP0_PWM (MTK_PIN_NO(5) | 3)
+#define MT2712_PIN_5_PWM1__FUNC_DIN_VSYNC (MTK_PIN_NO(5) | 5)
+
+#define MT2712_PIN_6_PWM2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT2712_PIN_6_PWM2__FUNC_PWM2 (MTK_PIN_NO(6) | 1)
+#define MT2712_PIN_6_PWM2__FUNC_DISP0_PWM (MTK_PIN_NO(6) | 2)
+#define MT2712_PIN_6_PWM2__FUNC_DISP1_PWM (MTK_PIN_NO(6) | 3)
+#define MT2712_PIN_6_PWM2__FUNC_DISP2_PWM (MTK_PIN_NO(6) | 4)
+#define MT2712_PIN_6_PWM2__FUNC_DIN_HSYNC (MTK_PIN_NO(6) | 5)
+
+#define MT2712_PIN_7_PWM3__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT2712_PIN_7_PWM3__FUNC_PWM3 (MTK_PIN_NO(7) | 1)
+#define MT2712_PIN_7_PWM3__FUNC_DISP1_PWM (MTK_PIN_NO(7) | 2)
+#define MT2712_PIN_7_PWM3__FUNC_DISP0_PWM (MTK_PIN_NO(7) | 3)
+#define MT2712_PIN_7_PWM3__FUNC_LCM_RST2 (MTK_PIN_NO(7) | 4)
+#define MT2712_PIN_7_PWM3__FUNC_DIN_D0 (MTK_PIN_NO(7) | 5)
+
+#define MT2712_PIN_8_PWM4__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT2712_PIN_8_PWM4__FUNC_PWM4 (MTK_PIN_NO(8) | 1)
+#define MT2712_PIN_8_PWM4__FUNC_DISP0_PWM (MTK_PIN_NO(8) | 2)
+#define MT2712_PIN_8_PWM4__FUNC_DISP1_PWM (MTK_PIN_NO(8) | 3)
+#define MT2712_PIN_8_PWM4__FUNC_DSIA_TE (MTK_PIN_NO(8) | 4)
+#define MT2712_PIN_8_PWM4__FUNC_DIN_D1 (MTK_PIN_NO(8) | 5)
+
+#define MT2712_PIN_9_PWM5__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT2712_PIN_9_PWM5__FUNC_PWM5 (MTK_PIN_NO(9) | 1)
+#define MT2712_PIN_9_PWM5__FUNC_DISP1_PWM (MTK_PIN_NO(9) | 2)
+#define MT2712_PIN_9_PWM5__FUNC_DISP0_PWM (MTK_PIN_NO(9) | 3)
+#define MT2712_PIN_9_PWM5__FUNC_DSIB_TE (MTK_PIN_NO(9) | 4)
+#define MT2712_PIN_9_PWM5__FUNC_DIN_D2 (MTK_PIN_NO(9) | 5)
+
+#define MT2712_PIN_10_PWM6__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT2712_PIN_10_PWM6__FUNC_PWM6 (MTK_PIN_NO(10) | 1)
+#define MT2712_PIN_10_PWM6__FUNC_DISP0_PWM (MTK_PIN_NO(10) | 2)
+#define MT2712_PIN_10_PWM6__FUNC_DISP1_PWM (MTK_PIN_NO(10) | 3)
+#define MT2712_PIN_10_PWM6__FUNC_LCM_RST0 (MTK_PIN_NO(10) | 4)
+
+#define MT2712_PIN_11_PWM7__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT2712_PIN_11_PWM7__FUNC_PWM7 (MTK_PIN_NO(11) | 1)
+#define MT2712_PIN_11_PWM7__FUNC_DISP1_PWM (MTK_PIN_NO(11) | 2)
+#define MT2712_PIN_11_PWM7__FUNC_DISP0_PWM (MTK_PIN_NO(11) | 3)
+#define MT2712_PIN_11_PWM7__FUNC_LCM_RST1 (MTK_PIN_NO(11) | 4)
+
+#define MT2712_PIN_12_IDDIG_P0__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A (MTK_PIN_NO(12) | 1)
+#define MT2712_PIN_12_IDDIG_P0__FUNC_DIN_D7 (MTK_PIN_NO(12) | 5)
+
+#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_DRV_VBUS_A (MTK_PIN_NO(13) | 1)
+
+#define MT2712_PIN_14_IDDIG_P1__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B (MTK_PIN_NO(14) | 1)
+
+#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_DRV_VBUS_B (MTK_PIN_NO(15) | 1)
+
+#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_DRV_VBUS_C (MTK_PIN_NO(16) | 1)
+
+#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_DRV_VBUS_D (MTK_PIN_NO(17) | 1)
+
+#define MT2712_PIN_18_KPROW0__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT2712_PIN_18_KPROW0__FUNC_KROW0 (MTK_PIN_NO(18) | 1)
+
+#define MT2712_PIN_19_KPCOL0__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT2712_PIN_19_KPCOL0__FUNC_KCOL0 (MTK_PIN_NO(19) | 1)
+
+#define MT2712_PIN_20_KPROW1__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT2712_PIN_20_KPROW1__FUNC_KROW1 (MTK_PIN_NO(20) | 1)
+
+#define MT2712_PIN_21_KPCOL1__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT2712_PIN_21_KPCOL1__FUNC_KCOL1 (MTK_PIN_NO(21) | 1)
+
+#define MT2712_PIN_22_KPROW2__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT2712_PIN_22_KPROW2__FUNC_KROW2 (MTK_PIN_NO(22) | 1)
+#define MT2712_PIN_22_KPROW2__FUNC_DISP1_PWM (MTK_PIN_NO(22) | 2)
+
+#define MT2712_PIN_23_KPCOL2__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT2712_PIN_23_KPCOL2__FUNC_KCOL2 (MTK_PIN_NO(23) | 1)
+#define MT2712_PIN_23_KPCOL2__FUNC_DISP0_PWM (MTK_PIN_NO(23) | 2)
+
+#define MT2712_PIN_24_CMMCLK__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT2712_PIN_24_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(24) | 1)
+#define MT2712_PIN_24_CMMCLK__FUNC_DBG_MON_A_1_ (MTK_PIN_NO(24) | 7)
+
+#define MT2712_PIN_25_CM2MCLK__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT2712_PIN_25_CM2MCLK__FUNC_CM2MCLK (MTK_PIN_NO(25) | 1)
+#define MT2712_PIN_25_CM2MCLK__FUNC_DBG_MON_A_2_ (MTK_PIN_NO(25) | 7)
+
+#define MT2712_PIN_26_PCM_TX__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DO (MTK_PIN_NO(26) | 1)
+#define MT2712_PIN_26_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(26) | 2)
+#define MT2712_PIN_26_PCM_TX__FUNC_DAI_TX (MTK_PIN_NO(26) | 3)
+#define MT2712_PIN_26_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(26) | 4)
+#define MT2712_PIN_26_PCM_TX__FUNC_DAI_RX (MTK_PIN_NO(26) | 5)
+#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DI (MTK_PIN_NO(26) | 6)
+#define MT2712_PIN_26_PCM_TX__FUNC_DBG_MON_A_3_ (MTK_PIN_NO(26) | 7)
+
+#define MT2712_PIN_27_PCM_CLK__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT2712_PIN_27_PCM_CLK__FUNC_PCM1_CLK (MTK_PIN_NO(27) | 1)
+#define MT2712_PIN_27_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(27) | 2)
+#define MT2712_PIN_27_PCM_CLK__FUNC_DAI_CLK (MTK_PIN_NO(27) | 3)
+#define MT2712_PIN_27_PCM_CLK__FUNC_DBG_MON_A_4_ (MTK_PIN_NO(27) | 7)
+
+#define MT2712_PIN_28_PCM_RX__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DI (MTK_PIN_NO(28) | 1)
+#define MT2712_PIN_28_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(28) | 2)
+#define MT2712_PIN_28_PCM_RX__FUNC_DAI_RX (MTK_PIN_NO(28) | 3)
+#define MT2712_PIN_28_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(28) | 4)
+#define MT2712_PIN_28_PCM_RX__FUNC_DAI_TX (MTK_PIN_NO(28) | 5)
+#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DO (MTK_PIN_NO(28) | 6)
+#define MT2712_PIN_28_PCM_RX__FUNC_DBG_MON_A_5_ (MTK_PIN_NO(28) | 7)
+
+#define MT2712_PIN_29_PCM_SYNC__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_PCM1_SYNC (MTK_PIN_NO(29) | 1)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(29) | 2)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_DAI_SYNC (MTK_PIN_NO(29) | 3)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_DBG_MON_A_6_ (MTK_PIN_NO(29) | 7)
+
+#define MT2712_PIN_30_NCEB0__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT2712_PIN_30_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(30) | 1)
+#define MT2712_PIN_30_NCEB0__FUNC_USB0_FT_SDA (MTK_PIN_NO(30) | 2)
+#define MT2712_PIN_30_NCEB0__FUNC_DBG_MON_A_7_ (MTK_PIN_NO(30) | 7)
+
+#define MT2712_PIN_31_NCEB1__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT2712_PIN_31_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(31) | 1)
+#define MT2712_PIN_31_NCEB1__FUNC_USB1_FT_SCL (MTK_PIN_NO(31) | 2)
+#define MT2712_PIN_31_NCEB1__FUNC_DBG_MON_A_8_ (MTK_PIN_NO(31) | 7)
+
+#define MT2712_PIN_32_NF_DQS__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT2712_PIN_32_NF_DQS__FUNC_NF_DQS (MTK_PIN_NO(32) | 1)
+#define MT2712_PIN_32_NF_DQS__FUNC_USB1_FT_SDA (MTK_PIN_NO(32) | 2)
+#define MT2712_PIN_32_NF_DQS__FUNC_DBG_MON_A_9_ (MTK_PIN_NO(32) | 7)
+
+#define MT2712_PIN_33_NWEB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT2712_PIN_33_NWEB__FUNC_NWEB (MTK_PIN_NO(33) | 1)
+#define MT2712_PIN_33_NWEB__FUNC_USB2_FT_SCL (MTK_PIN_NO(33) | 2)
+#define MT2712_PIN_33_NWEB__FUNC_DBG_MON_A_10_ (MTK_PIN_NO(33) | 7)
+
+#define MT2712_PIN_34_NREB__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT2712_PIN_34_NREB__FUNC_NREB (MTK_PIN_NO(34) | 1)
+#define MT2712_PIN_34_NREB__FUNC_USB2_FT_SDA (MTK_PIN_NO(34) | 2)
+#define MT2712_PIN_34_NREB__FUNC_DBG_MON_A_11_ (MTK_PIN_NO(34) | 7)
+
+#define MT2712_PIN_35_NCLE__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT2712_PIN_35_NCLE__FUNC_NCLE (MTK_PIN_NO(35) | 1)
+#define MT2712_PIN_35_NCLE__FUNC_USB3_FT_SCL (MTK_PIN_NO(35) | 2)
+#define MT2712_PIN_35_NCLE__FUNC_DBG_MON_A_12_ (MTK_PIN_NO(35) | 7)
+
+#define MT2712_PIN_36_NALE__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT2712_PIN_36_NALE__FUNC_NALE (MTK_PIN_NO(36) | 1)
+#define MT2712_PIN_36_NALE__FUNC_USB3_FT_SDA (MTK_PIN_NO(36) | 2)
+#define MT2712_PIN_36_NALE__FUNC_DBG_MON_A_13_ (MTK_PIN_NO(36) | 7)
+
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(37) | 1)
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_USB0_FT_SCL (MTK_PIN_NO(37) | 2)
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_DBG_MON_A_0_ (MTK_PIN_NO(37) | 7)
+
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(38) | 1)
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_NAND_ND7 (MTK_PIN_NO(38) | 2)
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_DBG_MON_A_14_ (MTK_PIN_NO(38) | 7)
+
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(39) | 1)
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_NAND_ND6 (MTK_PIN_NO(39) | 2)
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_DBG_MON_A_15_ (MTK_PIN_NO(39) | 7)
+
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(40) | 1)
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_NAND_ND5 (MTK_PIN_NO(40) | 2)
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_DBG_MON_A_16_ (MTK_PIN_NO(40) | 7)
+
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(41) | 1)
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_NAND_ND4 (MTK_PIN_NO(41) | 2)
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_DBG_MON_A_17_ (MTK_PIN_NO(41) | 7)
+
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(42) | 1)
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_NAND_ND3 (MTK_PIN_NO(42) | 2)
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_DBG_MON_A_18_ (MTK_PIN_NO(42) | 7)
+
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(43) | 1)
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_NAND_ND2 (MTK_PIN_NO(43) | 2)
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_DBG_MON_A_19_ (MTK_PIN_NO(43) | 7)
+
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(44) | 1)
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_NAND_ND1 (MTK_PIN_NO(44) | 2)
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_DBG_MON_A_20_ (MTK_PIN_NO(44) | 7)
+
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(45) | 1)
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_NAND_ND0 (MTK_PIN_NO(45) | 2)
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_DBG_MON_A_21_ (MTK_PIN_NO(45) | 7)
+
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(46) | 1)
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_NAND_NRNB (MTK_PIN_NO(46) | 2)
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_DBG_MON_A_22_ (MTK_PIN_NO(46) | 7)
+
+#define MT2712_PIN_47_MSDC0E_DSL__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT2712_PIN_47_MSDC0E_DSL__FUNC_MSDC0_DSL (MTK_PIN_NO(47) | 1)
+#define MT2712_PIN_47_MSDC0E_DSL__FUNC_DBG_MON_A_23_ (MTK_PIN_NO(47) | 7)
+
+#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(48) | 1)
+#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_DBG_MON_A_24_ (MTK_PIN_NO(48) | 7)
+
+#define MT2712_PIN_49_MSDC3_DAT3__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT2712_PIN_49_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(49) | 1)
+#define MT2712_PIN_49_MSDC3_DAT3__FUNC_DBG_MON_A_25_ (MTK_PIN_NO(49) | 7)
+
+#define MT2712_PIN_50_MSDC3_DAT2__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT2712_PIN_50_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(50) | 1)
+#define MT2712_PIN_50_MSDC3_DAT2__FUNC_DBG_MON_A_26_ (MTK_PIN_NO(50) | 7)
+
+#define MT2712_PIN_51_MSDC3_DAT1__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT2712_PIN_51_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(51) | 1)
+#define MT2712_PIN_51_MSDC3_DAT1__FUNC_DBG_MON_A_27_ (MTK_PIN_NO(51) | 7)
+
+#define MT2712_PIN_52_MSDC3_DAT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT2712_PIN_52_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(52) | 1)
+#define MT2712_PIN_52_MSDC3_DAT0__FUNC_DBG_MON_A_28_ (MTK_PIN_NO(52) | 7)
+
+#define MT2712_PIN_53_MSDC3_CMD__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT2712_PIN_53_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(53) | 1)
+#define MT2712_PIN_53_MSDC3_CMD__FUNC_DBG_MON_A_29_ (MTK_PIN_NO(53) | 7)
+
+#define MT2712_PIN_54_MSDC3_INS__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT2712_PIN_54_MSDC3_INS__FUNC_MSDC3_INS (MTK_PIN_NO(54) | 1)
+#define MT2712_PIN_54_MSDC3_INS__FUNC_DBG_MON_A_30_ (MTK_PIN_NO(54) | 7)
+
+#define MT2712_PIN_55_MSDC3_DSL__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT2712_PIN_55_MSDC3_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(55) | 1)
+#define MT2712_PIN_55_MSDC3_DSL__FUNC_DBG_MON_A_31_ (MTK_PIN_NO(55) | 7)
+
+#define MT2712_PIN_56_MSDC3_CLK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT2712_PIN_56_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(56) | 1)
+#define MT2712_PIN_56_MSDC3_CLK__FUNC_DBG_MON_A_32_ (MTK_PIN_NO(56) | 7)
+
+#define MT2712_PIN_57_NOR_CS__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT2712_PIN_57_NOR_CS__FUNC_NOR_CS (MTK_PIN_NO(57) | 1)
+
+#define MT2712_PIN_58_NOR_CK__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT2712_PIN_58_NOR_CK__FUNC_NOR_CK (MTK_PIN_NO(58) | 1)
+
+#define MT2712_PIN_59_NOR_IO0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT2712_PIN_59_NOR_IO0__FUNC_NOR_IO0 (MTK_PIN_NO(59) | 1)
+
+#define MT2712_PIN_60_NOR_IO1__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT2712_PIN_60_NOR_IO1__FUNC_NOR_IO1 (MTK_PIN_NO(60) | 1)
+
+#define MT2712_PIN_61_NOR_IO2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT2712_PIN_61_NOR_IO2__FUNC_NOR_IO2 (MTK_PIN_NO(61) | 1)
+
+#define MT2712_PIN_62_NOR_IO3__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT2712_PIN_62_NOR_IO3__FUNC_NOR_IO3 (MTK_PIN_NO(62) | 1)
+
+#define MT2712_PIN_63_MSDC1_CLK__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT2712_PIN_63_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(63) | 1)
+#define MT2712_PIN_63_MSDC1_CLK__FUNC_UDI_TCK (MTK_PIN_NO(63) | 2)
+
+#define MT2712_PIN_64_MSDC1_DAT3__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT2712_PIN_64_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(64) | 1)
+#define MT2712_PIN_64_MSDC1_DAT3__FUNC_UDI_TDI (MTK_PIN_NO(64) | 2)
+
+#define MT2712_PIN_65_MSDC1_DAT1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT2712_PIN_65_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(65) | 1)
+#define MT2712_PIN_65_MSDC1_DAT1__FUNC_UDI_TMS (MTK_PIN_NO(65) | 2)
+
+#define MT2712_PIN_66_MSDC1_DAT2__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT2712_PIN_66_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(66) | 1)
+#define MT2712_PIN_66_MSDC1_DAT2__FUNC_UDI_TDO (MTK_PIN_NO(66) | 2)
+
+#define MT2712_PIN_67_MSDC1_PSW__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT2712_PIN_67_MSDC1_PSW__FUNC_UDI_NTRST (MTK_PIN_NO(67) | 2)
+
+#define MT2712_PIN_68_MSDC1_DAT0__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT2712_PIN_68_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(68) | 1)
+
+#define MT2712_PIN_69_MSDC1_CMD__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT2712_PIN_69_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(69) | 1)
+
+#define MT2712_PIN_70_MSDC1_INS__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+
+#define MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3 (MTK_PIN_NO(71) | 1)
+#define MT2712_PIN_71_GBE_TXD3__FUNC_DBG_MON_B_0_ (MTK_PIN_NO(71) | 7)
+
+#define MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2 (MTK_PIN_NO(72) | 1)
+#define MT2712_PIN_72_GBE_TXD2__FUNC_DBG_MON_B_1_ (MTK_PIN_NO(72) | 7)
+
+#define MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1 (MTK_PIN_NO(73) | 1)
+#define MT2712_PIN_73_GBE_TXD1__FUNC_DBG_MON_B_2_ (MTK_PIN_NO(73) | 7)
+
+#define MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0 (MTK_PIN_NO(74) | 1)
+#define MT2712_PIN_74_GBE_TXD0__FUNC_DBG_MON_B_3_ (MTK_PIN_NO(74) | 7)
+
+#define MT2712_PIN_75_GBE_TXC__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC (MTK_PIN_NO(75) | 1)
+#define MT2712_PIN_75_GBE_TXC__FUNC_DBG_MON_B_4_ (MTK_PIN_NO(75) | 7)
+
+#define MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN (MTK_PIN_NO(76) | 1)
+#define MT2712_PIN_76_GBE_TXEN__FUNC_DBG_MON_B_5_ (MTK_PIN_NO(76) | 7)
+
+#define MT2712_PIN_77_GBE_TXER__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT2712_PIN_77_GBE_TXER__FUNC_GBE_TXER (MTK_PIN_NO(77) | 1)
+#define MT2712_PIN_77_GBE_TXER__FUNC_DBG_MON_B_6_ (MTK_PIN_NO(77) | 7)
+
+#define MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3 (MTK_PIN_NO(78) | 1)
+#define MT2712_PIN_78_GBE_RXD3__FUNC_DBG_MON_B_7_ (MTK_PIN_NO(78) | 7)
+
+#define MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2 (MTK_PIN_NO(79) | 1)
+#define MT2712_PIN_79_GBE_RXD2__FUNC_DBG_MON_B_8_ (MTK_PIN_NO(79) | 7)
+
+#define MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1 (MTK_PIN_NO(80) | 1)
+#define MT2712_PIN_80_GBE_RXD1__FUNC_DBG_MON_B_9_ (MTK_PIN_NO(80) | 7)
+
+#define MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0 (MTK_PIN_NO(81) | 1)
+#define MT2712_PIN_81_GBE_RXD0__FUNC_DBG_MON_B_10_ (MTK_PIN_NO(81) | 7)
+
+#define MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV (MTK_PIN_NO(82) | 1)
+#define MT2712_PIN_82_GBE_RXDV__FUNC_DBG_MON_B_11_ (MTK_PIN_NO(82) | 7)
+
+#define MT2712_PIN_83_GBE_RXER__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT2712_PIN_83_GBE_RXER__FUNC_GBE_RXER (MTK_PIN_NO(83) | 1)
+#define MT2712_PIN_83_GBE_RXER__FUNC_DBG_MON_B_12_ (MTK_PIN_NO(83) | 7)
+
+#define MT2712_PIN_84_GBE_RXC__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC (MTK_PIN_NO(84) | 1)
+#define MT2712_PIN_84_GBE_RXC__FUNC_DBG_MON_B_13_ (MTK_PIN_NO(84) | 7)
+
+#define MT2712_PIN_85_GBE_MDC__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC (MTK_PIN_NO(85) | 1)
+#define MT2712_PIN_85_GBE_MDC__FUNC_DBG_MON_B_14_ (MTK_PIN_NO(85) | 7)
+
+#define MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO (MTK_PIN_NO(86) | 1)
+#define MT2712_PIN_86_GBE_MDIO__FUNC_DBG_MON_B_15_ (MTK_PIN_NO(86) | 7)
+
+#define MT2712_PIN_87_GBE_COL__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define MT2712_PIN_87_GBE_COL__FUNC_GBE_COL (MTK_PIN_NO(87) | 1)
+#define MT2712_PIN_87_GBE_COL__FUNC_DBG_MON_B_16_ (MTK_PIN_NO(87) | 7)
+
+#define MT2712_PIN_88_GBE_INTR__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_INTR (MTK_PIN_NO(88) | 1)
+#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_CRS (MTK_PIN_NO(88) | 2)
+#define MT2712_PIN_88_GBE_INTR__FUNC_DBG_MON_B_17_ (MTK_PIN_NO(88) | 7)
+
+#define MT2712_PIN_89_MSDC2_CLK__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define MT2712_PIN_89_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(89) | 1)
+#define MT2712_PIN_89_MSDC2_CLK__FUNC_DBG_MON_B_18_ (MTK_PIN_NO(89) | 7)
+
+#define MT2712_PIN_90_MSDC2_DAT3__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define MT2712_PIN_90_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(90) | 1)
+#define MT2712_PIN_90_MSDC2_DAT3__FUNC_DBG_MON_B_19_ (MTK_PIN_NO(90) | 7)
+
+#define MT2712_PIN_91_MSDC2_DAT2__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT2712_PIN_91_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(91) | 1)
+#define MT2712_PIN_91_MSDC2_DAT2__FUNC_DBG_MON_B_20_ (MTK_PIN_NO(91) | 7)
+
+#define MT2712_PIN_92_MSDC2_DAT1__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT2712_PIN_92_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(92) | 1)
+#define MT2712_PIN_92_MSDC2_DAT1__FUNC_DBG_MON_B_21_ (MTK_PIN_NO(92) | 7)
+
+#define MT2712_PIN_93_MSDC2_DAT0__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT2712_PIN_93_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(93) | 1)
+#define MT2712_PIN_93_MSDC2_DAT0__FUNC_DBG_MON_B_22_ (MTK_PIN_NO(93) | 7)
+
+#define MT2712_PIN_94_MSDC2_INS__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT2712_PIN_94_MSDC2_INS__FUNC_DBG_MON_B_23_ (MTK_PIN_NO(94) | 7)
+
+#define MT2712_PIN_95_MSDC2_CMD__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define MT2712_PIN_95_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(95) | 1)
+#define MT2712_PIN_95_MSDC2_CMD__FUNC_DBG_MON_B_24_ (MTK_PIN_NO(95) | 7)
+
+#define MT2712_PIN_96_MSDC2_PSW__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define MT2712_PIN_96_MSDC2_PSW__FUNC_DBG_MON_B_25_ (MTK_PIN_NO(96) | 7)
+
+#define MT2712_PIN_97_URXD4__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define MT2712_PIN_97_URXD4__FUNC_URXD4 (MTK_PIN_NO(97) | 1)
+#define MT2712_PIN_97_URXD4__FUNC_UTXD4 (MTK_PIN_NO(97) | 2)
+#define MT2712_PIN_97_URXD4__FUNC_MRG_CLK (MTK_PIN_NO(97) | 3)
+#define MT2712_PIN_97_URXD4__FUNC_PCM1_CLK (MTK_PIN_NO(97) | 4)
+#define MT2712_PIN_97_URXD4__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(97) | 5)
+#define MT2712_PIN_97_URXD4__FUNC_I2SO1_WS (MTK_PIN_NO(97) | 6)
+#define MT2712_PIN_97_URXD4__FUNC_DBG_MON_B_26_ (MTK_PIN_NO(97) | 7)
+
+#define MT2712_PIN_98_URTS4__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define MT2712_PIN_98_URTS4__FUNC_URTS4 (MTK_PIN_NO(98) | 1)
+#define MT2712_PIN_98_URTS4__FUNC_UCTS4 (MTK_PIN_NO(98) | 2)
+#define MT2712_PIN_98_URTS4__FUNC_MRG_RX (MTK_PIN_NO(98) | 3)
+#define MT2712_PIN_98_URTS4__FUNC_PCM1_DI (MTK_PIN_NO(98) | 4)
+#define MT2712_PIN_98_URTS4__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(98) | 5)
+#define MT2712_PIN_98_URTS4__FUNC_I2SO1_MCK (MTK_PIN_NO(98) | 6)
+#define MT2712_PIN_98_URTS4__FUNC_DBG_MON_B_27_ (MTK_PIN_NO(98) | 7)
+
+#define MT2712_PIN_99_UTXD4__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define MT2712_PIN_99_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(99) | 1)
+#define MT2712_PIN_99_UTXD4__FUNC_URXD4 (MTK_PIN_NO(99) | 2)
+#define MT2712_PIN_99_UTXD4__FUNC_MRG_SYNC (MTK_PIN_NO(99) | 3)
+#define MT2712_PIN_99_UTXD4__FUNC_PCM1_SYNC (MTK_PIN_NO(99) | 4)
+#define MT2712_PIN_99_UTXD4__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(99) | 5)
+#define MT2712_PIN_99_UTXD4__FUNC_I2SO1_BCK (MTK_PIN_NO(99) | 6)
+#define MT2712_PIN_99_UTXD4__FUNC_DBG_MON_B_28_ (MTK_PIN_NO(99) | 7)
+
+#define MT2712_PIN_100_UCTS4__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT2712_PIN_100_UCTS4__FUNC_UCTS4 (MTK_PIN_NO(100) | 1)
+#define MT2712_PIN_100_UCTS4__FUNC_URTS4 (MTK_PIN_NO(100) | 2)
+#define MT2712_PIN_100_UCTS4__FUNC_MRG_TX (MTK_PIN_NO(100) | 3)
+#define MT2712_PIN_100_UCTS4__FUNC_PCM1_DO (MTK_PIN_NO(100) | 4)
+#define MT2712_PIN_100_UCTS4__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(100) | 5)
+#define MT2712_PIN_100_UCTS4__FUNC_I2SO1_DO (MTK_PIN_NO(100) | 6)
+#define MT2712_PIN_100_UCTS4__FUNC_DBG_MON_B_29_ (MTK_PIN_NO(100) | 7)
+
+#define MT2712_PIN_101_URXD5__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT2712_PIN_101_URXD5__FUNC_URXD5 (MTK_PIN_NO(101) | 1)
+#define MT2712_PIN_101_URXD5__FUNC_UTXD5 (MTK_PIN_NO(101) | 2)
+#define MT2712_PIN_101_URXD5__FUNC_I2SO3_WS (MTK_PIN_NO(101) | 3)
+#define MT2712_PIN_101_URXD5__FUNC_TDMIN_LRCK (MTK_PIN_NO(101) | 4)
+#define MT2712_PIN_101_URXD5__FUNC_I2SO0_WS (MTK_PIN_NO(101) | 6)
+#define MT2712_PIN_101_URXD5__FUNC_DBG_MON_B_30_ (MTK_PIN_NO(101) | 7)
+
+#define MT2712_PIN_102_URTS5__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT2712_PIN_102_URTS5__FUNC_URTS5 (MTK_PIN_NO(102) | 1)
+#define MT2712_PIN_102_URTS5__FUNC_UCTS5 (MTK_PIN_NO(102) | 2)
+#define MT2712_PIN_102_URTS5__FUNC_I2SO3_MCK (MTK_PIN_NO(102) | 3)
+#define MT2712_PIN_102_URTS5__FUNC_TDMIN_MCLK (MTK_PIN_NO(102) | 4)
+#define MT2712_PIN_102_URTS5__FUNC_IR_IN (MTK_PIN_NO(102) | 5)
+#define MT2712_PIN_102_URTS5__FUNC_I2SO0_MCK (MTK_PIN_NO(102) | 6)
+#define MT2712_PIN_102_URTS5__FUNC_DBG_MON_B_31_ (MTK_PIN_NO(102) | 7)
+
+#define MT2712_PIN_103_UTXD5__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT2712_PIN_103_UTXD5__FUNC_UTXD5 (MTK_PIN_NO(103) | 1)
+#define MT2712_PIN_103_UTXD5__FUNC_URXD5 (MTK_PIN_NO(103) | 2)
+#define MT2712_PIN_103_UTXD5__FUNC_I2SO3_BCK (MTK_PIN_NO(103) | 3)
+#define MT2712_PIN_103_UTXD5__FUNC_TDMIN_BCK (MTK_PIN_NO(103) | 4)
+#define MT2712_PIN_103_UTXD5__FUNC_I2SO0_BCK (MTK_PIN_NO(103) | 6)
+#define MT2712_PIN_103_UTXD5__FUNC_DBG_MON_B_32_ (MTK_PIN_NO(103) | 7)
+
+#define MT2712_PIN_104_UCTS5__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT2712_PIN_104_UCTS5__FUNC_UCTS5 (MTK_PIN_NO(104) | 1)
+#define MT2712_PIN_104_UCTS5__FUNC_URTS5 (MTK_PIN_NO(104) | 2)
+#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO1 (MTK_PIN_NO(104) | 3)
+#define MT2712_PIN_104_UCTS5__FUNC_TDMIN_DI (MTK_PIN_NO(104) | 4)
+#define MT2712_PIN_104_UCTS5__FUNC_IR_IN (MTK_PIN_NO(104) | 5)
+#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO0 (MTK_PIN_NO(104) | 6)
+
+#define MT2712_PIN_105_I2C_SDA0__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT2712_PIN_105_I2C_SDA0__FUNC_SDA0 (MTK_PIN_NO(105) | 1)
+
+#define MT2712_PIN_106_I2C_SDA1__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT2712_PIN_106_I2C_SDA1__FUNC_SDA1 (MTK_PIN_NO(106) | 1)
+
+#define MT2712_PIN_107_I2C_SDA2__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT2712_PIN_107_I2C_SDA2__FUNC_SDA2 (MTK_PIN_NO(107) | 1)
+
+#define MT2712_PIN_108_I2C_SDA3__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT2712_PIN_108_I2C_SDA3__FUNC_SDA3 (MTK_PIN_NO(108) | 1)
+
+#define MT2712_PIN_109_I2C_SDA4__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT2712_PIN_109_I2C_SDA4__FUNC_SDA4 (MTK_PIN_NO(109) | 1)
+
+#define MT2712_PIN_110_I2C_SDA5__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT2712_PIN_110_I2C_SDA5__FUNC_SDA5 (MTK_PIN_NO(110) | 1)
+
+#define MT2712_PIN_111_I2C_SCL0__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT2712_PIN_111_I2C_SCL0__FUNC_SCL0 (MTK_PIN_NO(111) | 1)
+
+#define MT2712_PIN_112_I2C_SCL1__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT2712_PIN_112_I2C_SCL1__FUNC_SCL1 (MTK_PIN_NO(112) | 1)
+
+#define MT2712_PIN_113_I2C_SCL2__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT2712_PIN_113_I2C_SCL2__FUNC_SCL2 (MTK_PIN_NO(113) | 1)
+
+#define MT2712_PIN_114_I2C_SCL3__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT2712_PIN_114_I2C_SCL3__FUNC_SCL3 (MTK_PIN_NO(114) | 1)
+
+#define MT2712_PIN_115_I2C_SCL4__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT2712_PIN_115_I2C_SCL4__FUNC_SCL4 (MTK_PIN_NO(115) | 1)
+
+#define MT2712_PIN_116_I2C_SCL5__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT2712_PIN_116_I2C_SCL5__FUNC_SCL5 (MTK_PIN_NO(116) | 1)
+
+#define MT2712_PIN_117_URXD0__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT2712_PIN_117_URXD0__FUNC_URXD0 (MTK_PIN_NO(117) | 1)
+#define MT2712_PIN_117_URXD0__FUNC_UTXD0 (MTK_PIN_NO(117) | 2)
+
+#define MT2712_PIN_118_URXD1__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT2712_PIN_118_URXD1__FUNC_URXD1 (MTK_PIN_NO(118) | 1)
+#define MT2712_PIN_118_URXD1__FUNC_UTXD1 (MTK_PIN_NO(118) | 2)
+
+#define MT2712_PIN_119_URXD2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT2712_PIN_119_URXD2__FUNC_URXD2 (MTK_PIN_NO(119) | 1)
+#define MT2712_PIN_119_URXD2__FUNC_UTXD2 (MTK_PIN_NO(119) | 2)
+
+#define MT2712_PIN_120_UTXD0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT2712_PIN_120_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(120) | 1)
+#define MT2712_PIN_120_UTXD0__FUNC_URXD0 (MTK_PIN_NO(120) | 2)
+
+#define MT2712_PIN_121_UTXD1__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT2712_PIN_121_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(121) | 1)
+#define MT2712_PIN_121_UTXD1__FUNC_URXD1 (MTK_PIN_NO(121) | 2)
+
+#define MT2712_PIN_122_UTXD2__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT2712_PIN_122_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(122) | 1)
+#define MT2712_PIN_122_UTXD2__FUNC_URXD2 (MTK_PIN_NO(122) | 2)
+
+#define MT2712_PIN_123_URXD3__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT2712_PIN_123_URXD3__FUNC_URXD3 (MTK_PIN_NO(123) | 1)
+#define MT2712_PIN_123_URXD3__FUNC_UTXD3 (MTK_PIN_NO(123) | 2)
+#define MT2712_PIN_123_URXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(123) | 3)
+
+#define MT2712_PIN_124_UTXD3__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT2712_PIN_124_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(124) | 1)
+#define MT2712_PIN_124_UTXD3__FUNC_URXD3 (MTK_PIN_NO(124) | 2)
+#define MT2712_PIN_124_UTXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(124) | 3)
+
+#define MT2712_PIN_125_URTS3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT2712_PIN_125_URTS3__FUNC_URTS3 (MTK_PIN_NO(125) | 1)
+#define MT2712_PIN_125_URTS3__FUNC_UCTS3 (MTK_PIN_NO(125) | 2)
+#define MT2712_PIN_125_URTS3__FUNC_WATCH_DOG (MTK_PIN_NO(125) | 3)
+
+#define MT2712_PIN_126_UCTS3__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT2712_PIN_126_UCTS3__FUNC_UCTS3 (MTK_PIN_NO(126) | 1)
+#define MT2712_PIN_126_UCTS3__FUNC_URTS3 (MTK_PIN_NO(126) | 2)
+#define MT2712_PIN_126_UCTS3__FUNC_SRCLKENA0 (MTK_PIN_NO(126) | 3)
+
+#define MT2712_PIN_127_SPI2_CSN__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_2_ (MTK_PIN_NO(127) | 1)
+#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(127) | 2)
+
+#define MT2712_PIN_128_SPI2_MO__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_MO_2_ (MTK_PIN_NO(128) | 1)
+#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(128) | 2)
+
+#define MT2712_PIN_129_SPI2_MI__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_MI_2_ (MTK_PIN_NO(129) | 1)
+#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(129) | 2)
+
+#define MT2712_PIN_130_SPI2_CK__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_2_ (MTK_PIN_NO(130) | 1)
+#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(130) | 2)
+
+#define MT2712_PIN_131_SPI3_CSN__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define MT2712_PIN_131_SPI3_CSN__FUNC_SPI_CS_3_ (MTK_PIN_NO(131) | 1)
+
+#define MT2712_PIN_132_SPI3_MO__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define MT2712_PIN_132_SPI3_MO__FUNC_SPI_MO_3_ (MTK_PIN_NO(132) | 1)
+
+#define MT2712_PIN_133_SPI3_MI__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define MT2712_PIN_133_SPI3_MI__FUNC_SPI_MI_3_ (MTK_PIN_NO(133) | 1)
+
+#define MT2712_PIN_134_SPI3_CK__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define MT2712_PIN_134_SPI3_CK__FUNC_SPI_CK_3_ (MTK_PIN_NO(134) | 1)
+
+#define MT2712_PIN_135_KPROW3__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define MT2712_PIN_135_KPROW3__FUNC_KROW3 (MTK_PIN_NO(135) | 1)
+#define MT2712_PIN_135_KPROW3__FUNC_DSIC_TE (MTK_PIN_NO(135) | 2)
+
+#define MT2712_PIN_136_KPROW4__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define MT2712_PIN_136_KPROW4__FUNC_KROW4 (MTK_PIN_NO(136) | 1)
+#define MT2712_PIN_136_KPROW4__FUNC_DSID_TE (MTK_PIN_NO(136) | 2)
+
+#define MT2712_PIN_137_KPCOL3__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define MT2712_PIN_137_KPCOL3__FUNC_KCOL3 (MTK_PIN_NO(137) | 1)
+#define MT2712_PIN_137_KPCOL3__FUNC_DISP2_PWM (MTK_PIN_NO(137) | 2)
+
+#define MT2712_PIN_138_KPCOL4__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define MT2712_PIN_138_KPCOL4__FUNC_KCOL4 (MTK_PIN_NO(138) | 1)
+#define MT2712_PIN_138_KPCOL4__FUNC_LCM_RST2 (MTK_PIN_NO(138) | 2)
+
+#define MT2712_PIN_139_KPCOL5__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define MT2712_PIN_139_KPCOL5__FUNC_KCOL5 (MTK_PIN_NO(139) | 1)
+#define MT2712_PIN_139_KPCOL5__FUNC_DSIA_TE (MTK_PIN_NO(139) | 3)
+#define MT2712_PIN_139_KPCOL5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(139) | 4)
+
+#define MT2712_PIN_140_KPCOL6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define MT2712_PIN_140_KPCOL6__FUNC_KCOL6 (MTK_PIN_NO(140) | 1)
+#define MT2712_PIN_140_KPCOL6__FUNC_WATCH_DOG (MTK_PIN_NO(140) | 2)
+#define MT2712_PIN_140_KPCOL6__FUNC_LCM_RST1 (MTK_PIN_NO(140) | 3)
+
+#define MT2712_PIN_141_KPROW5__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define MT2712_PIN_141_KPROW5__FUNC_KROW5 (MTK_PIN_NO(141) | 1)
+#define MT2712_PIN_141_KPROW5__FUNC_LCM_RST0 (MTK_PIN_NO(141) | 3)
+#define MT2712_PIN_141_KPROW5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(141) | 4)
+
+#define MT2712_PIN_142_KPROW6__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define MT2712_PIN_142_KPROW6__FUNC_KROW6 (MTK_PIN_NO(142) | 1)
+#define MT2712_PIN_142_KPROW6__FUNC_SRCLKENA0 (MTK_PIN_NO(142) | 2)
+#define MT2712_PIN_142_KPROW6__FUNC_DSIB_TE (MTK_PIN_NO(142) | 3)
+
+#define MT2712_PIN_143_JTDO_ICE__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define MT2712_PIN_143_JTDO_ICE__FUNC_JTDO_ICE (MTK_PIN_NO(143) | 1)
+#define MT2712_PIN_143_JTDO_ICE__FUNC_DFD_TDO (MTK_PIN_NO(143) | 3)
+
+#define MT2712_PIN_144_JTCK_ICE__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define MT2712_PIN_144_JTCK_ICE__FUNC_JTCK_ICE (MTK_PIN_NO(144) | 1)
+#define MT2712_PIN_144_JTCK_ICE__FUNC_DFD_TCK (MTK_PIN_NO(144) | 3)
+
+#define MT2712_PIN_145_JTDI_ICE__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define MT2712_PIN_145_JTDI_ICE__FUNC_JTDI_ICE (MTK_PIN_NO(145) | 1)
+#define MT2712_PIN_145_JTDI_ICE__FUNC_DFD_TDI (MTK_PIN_NO(145) | 3)
+
+#define MT2712_PIN_146_JTMS_ICE__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define MT2712_PIN_146_JTMS_ICE__FUNC_JTMS_ICE (MTK_PIN_NO(146) | 1)
+#define MT2712_PIN_146_JTMS_ICE__FUNC_DFD_TMS (MTK_PIN_NO(146) | 3)
+
+#define MT2712_PIN_147_JTRSTB_ICE__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define MT2712_PIN_147_JTRSTB_ICE__FUNC_JTRST_B_ICE (MTK_PIN_NO(147) | 1)
+#define MT2712_PIN_147_JTRSTB_ICE__FUNC_DFD_NTRST (MTK_PIN_NO(147) | 3)
+
+#define MT2712_PIN_148_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define MT2712_PIN_148_GPIO148__FUNC_JTRSTB_CM4 (MTK_PIN_NO(148) | 1)
+#define MT2712_PIN_148_GPIO148__FUNC_DFD_NTRST (MTK_PIN_NO(148) | 3)
+
+#define MT2712_PIN_149_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define MT2712_PIN_149_GPIO149__FUNC_JTCK_CM4 (MTK_PIN_NO(149) | 1)
+#define MT2712_PIN_149_GPIO149__FUNC_DFD_TCK (MTK_PIN_NO(149) | 3)
+
+#define MT2712_PIN_150_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define MT2712_PIN_150_GPIO150__FUNC_JTMS_CM4 (MTK_PIN_NO(150) | 1)
+#define MT2712_PIN_150_GPIO150__FUNC_DFD_TMS (MTK_PIN_NO(150) | 3)
+
+#define MT2712_PIN_151_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define MT2712_PIN_151_GPIO151__FUNC_JTDI_CM4 (MTK_PIN_NO(151) | 1)
+#define MT2712_PIN_151_GPIO151__FUNC_DFD_TDI (MTK_PIN_NO(151) | 3)
+
+#define MT2712_PIN_152_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define MT2712_PIN_152_GPIO152__FUNC_JTDO_CM4 (MTK_PIN_NO(152) | 1)
+#define MT2712_PIN_152_GPIO152__FUNC_DFD_TDO (MTK_PIN_NO(152) | 3)
+
+#define MT2712_PIN_153_SPI0_CSN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_SPI_CS_0_ (MTK_PIN_NO(153) | 1)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_SRCLKENA0 (MTK_PIN_NO(153) | 2)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_UTXD0 (MTK_PIN_NO(153) | 3)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(153) | 4)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(153) | 6)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(153) | 7)
+
+#define MT2712_PIN_154_SPI0_MI__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define MT2712_PIN_154_SPI0_MI__FUNC_SPI_MI_0_ (MTK_PIN_NO(154) | 1)
+#define MT2712_PIN_154_SPI0_MI__FUNC_SRCLKENA0 (MTK_PIN_NO(154) | 2)
+#define MT2712_PIN_154_SPI0_MI__FUNC_URXD0 (MTK_PIN_NO(154) | 3)
+#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO0_DO0 (MTK_PIN_NO(154) | 4)
+#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO1_DO (MTK_PIN_NO(154) | 5)
+#define MT2712_PIN_154_SPI0_MI__FUNC_TDMO0_DATA (MTK_PIN_NO(154) | 6)
+#define MT2712_PIN_154_SPI0_MI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(154) | 7)
+
+#define MT2712_PIN_155_SPI0_CK__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define MT2712_PIN_155_SPI0_CK__FUNC_SPI_CK_0_ (MTK_PIN_NO(155) | 1)
+#define MT2712_PIN_155_SPI0_CK__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(155) | 2)
+#define MT2712_PIN_155_SPI0_CK__FUNC_UTXD1 (MTK_PIN_NO(155) | 3)
+#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(155) | 4)
+#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO1_BCK (MTK_PIN_NO(155) | 5)
+#define MT2712_PIN_155_SPI0_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(155) | 6)
+#define MT2712_PIN_155_SPI0_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(155) | 7)
+
+#define MT2712_PIN_156_SPI0_MO__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define MT2712_PIN_156_SPI0_MO__FUNC_SPI_MO_0_ (MTK_PIN_NO(156) | 1)
+#define MT2712_PIN_156_SPI0_MO__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(156) | 2)
+#define MT2712_PIN_156_SPI0_MO__FUNC_URXD1 (MTK_PIN_NO(156) | 3)
+#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO0_WS (MTK_PIN_NO(156) | 4)
+#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO1_WS (MTK_PIN_NO(156) | 5)
+#define MT2712_PIN_156_SPI0_MO__FUNC_TDMO0_LRCK (MTK_PIN_NO(156) | 6)
+#define MT2712_PIN_156_SPI0_MO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(156) | 7)
+
+#define MT2712_PIN_157_SPI5_CSN__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_SPI_CS_5_ (MTK_PIN_NO(157) | 1)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(157) | 2)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_UTXD2 (MTK_PIN_NO(157) | 3)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(157) | 4)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO1_MCK (MTK_PIN_NO(157) | 5)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(157) | 6)
+
+#define MT2712_PIN_158_SPI5_MI__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define MT2712_PIN_158_SPI5_MI__FUNC_SPI_MI_5_ (MTK_PIN_NO(158) | 1)
+#define MT2712_PIN_158_SPI5_MI__FUNC_DSIA_TE (MTK_PIN_NO(158) | 2)
+#define MT2712_PIN_158_SPI5_MI__FUNC_URXD2 (MTK_PIN_NO(158) | 3)
+
+#define MT2712_PIN_159_SPI5_MO__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define MT2712_PIN_159_SPI5_MO__FUNC_SPI_MO_5_ (MTK_PIN_NO(159) | 1)
+#define MT2712_PIN_159_SPI5_MO__FUNC_DSIB_TE (MTK_PIN_NO(159) | 2)
+#define MT2712_PIN_159_SPI5_MO__FUNC_UTXD3 (MTK_PIN_NO(159) | 3)
+
+#define MT2712_PIN_160_SPI5_CK__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define MT2712_PIN_160_SPI5_CK__FUNC_SPI_CK_5_ (MTK_PIN_NO(160) | 1)
+#define MT2712_PIN_160_SPI5_CK__FUNC_LCM_RST1 (MTK_PIN_NO(160) | 2)
+#define MT2712_PIN_160_SPI5_CK__FUNC_URXD3 (MTK_PIN_NO(160) | 3)
+
+#define MT2712_PIN_161_SPI1_CSN__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(161) | 1)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(161) | 2)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(161) | 4)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO2_DO (MTK_PIN_NO(161) | 5)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(161) | 6)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(161) | 7)
+
+#define MT2712_PIN_162_SPI1_SI__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_SI_1_ (MTK_PIN_NO(162) | 1)
+#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_MI_4_ (MTK_PIN_NO(162) | 2)
+#define MT2712_PIN_162_SPI1_SI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(162) | 4)
+#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO2_BCK (MTK_PIN_NO(162) | 5)
+#define MT2712_PIN_162_SPI1_SI__FUNC_TDMO0_DATA (MTK_PIN_NO(162) | 6)
+#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO0_DO0 (MTK_PIN_NO(162) | 7)
+
+#define MT2712_PIN_163_SPI1_CK__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(163) | 1)
+#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(163) | 2)
+#define MT2712_PIN_163_SPI1_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(163) | 4)
+#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO2_WS (MTK_PIN_NO(163) | 5)
+#define MT2712_PIN_163_SPI1_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(163) | 6)
+#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(163) | 7)
+
+#define MT2712_PIN_164_SPI1_SO__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_SO_1_ (MTK_PIN_NO(164) | 1)
+#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_MO_4_ (MTK_PIN_NO(164) | 2)
+#define MT2712_PIN_164_SPI1_SO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(164) | 4)
+#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO2_MCK (MTK_PIN_NO(164) | 5)
+#define MT2712_PIN_164_SPI1_SO__FUNC_TDMO0_LRCK (MTK_PIN_NO(164) | 6)
+#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO0_WS (MTK_PIN_NO(164) | 7)
+
+#define MT2712_PIN_165_SPI4_CSN__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(165) | 1)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(165) | 2)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(165) | 3)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_UTXD4 (MTK_PIN_NO(165) | 4)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO1_DO (MTK_PIN_NO(165) | 5)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(165) | 6)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(165) | 7)
+
+#define MT2712_PIN_166_SPI4_MI__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_MI_4_ (MTK_PIN_NO(166) | 1)
+#define MT2712_PIN_166_SPI4_MI__FUNC_DSIA_TE (MTK_PIN_NO(166) | 2)
+#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(166) | 3)
+#define MT2712_PIN_166_SPI4_MI__FUNC_URXD4 (MTK_PIN_NO(166) | 4)
+#define MT2712_PIN_166_SPI4_MI__FUNC_I2SO1_BCK (MTK_PIN_NO(166) | 5)
+
+#define MT2712_PIN_167_SPI4_MO__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_MO_4_ (MTK_PIN_NO(167) | 1)
+#define MT2712_PIN_167_SPI4_MO__FUNC_DSIB_TE (MTK_PIN_NO(167) | 2)
+#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(167) | 3)
+#define MT2712_PIN_167_SPI4_MO__FUNC_UTXD5 (MTK_PIN_NO(167) | 4)
+#define MT2712_PIN_167_SPI4_MO__FUNC_I2SO1_WS (MTK_PIN_NO(167) | 5)
+
+#define MT2712_PIN_168_SPI4_CK__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(168) | 1)
+#define MT2712_PIN_168_SPI4_CK__FUNC_LCM_RST1 (MTK_PIN_NO(168) | 2)
+#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(168) | 3)
+#define MT2712_PIN_168_SPI4_CK__FUNC_URXD5 (MTK_PIN_NO(168) | 4)
+#define MT2712_PIN_168_SPI4_CK__FUNC_I2SO1_MCK (MTK_PIN_NO(168) | 5)
+
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(169) | 1)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(169) | 2)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(169) | 3)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(169) | 4)
+
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(170) | 1)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(170) | 2)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(170) | 3)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(170) | 4)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(170) | 5)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(170) | 6)
+
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(171) | 1)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(171) | 2)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(171) | 3)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(171) | 4)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(171) | 5)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(171) | 6)
+
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(172) | 1)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(172) | 2)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(172) | 3)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(172) | 4)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(172) | 5)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(172) | 6)
+
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(173) | 1)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(173) | 2)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(173) | 3)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DI (MTK_PIN_NO(173) | 4)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(173) | 5)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DO (MTK_PIN_NO(173) | 6)
+
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(174) | 1)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(174) | 2)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(174) | 3)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(174) | 4)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(174) | 5)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(174) | 6)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(174) | 7)
+
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(175) | 1)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(175) | 2)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(175) | 3)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(175) | 4)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(175) | 5)
+
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(176) | 1)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(176) | 2)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(176) | 3)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(176) | 4)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(176) | 5)
+
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(177) | 1)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(177) | 2)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(177) | 3)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(177) | 4)
+
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(178) | 1)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(178) | 2)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(178) | 3)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(178) | 4)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(178) | 5)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(178) | 6)
+
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(179) | 1)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(179) | 2)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(179) | 3)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(179) | 4)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(179) | 5)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(179) | 6)
+
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(180) | 1)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(180) | 2)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(180) | 3)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(180) | 4)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(180) | 5)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(180) | 6)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2S_IQ2_SDIB (MTK_PIN_NO(180) | 7)
+
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(181) | 1)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(181) | 2)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(181) | 3)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_DAI_TX (MTK_PIN_NO(181) | 4)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_TDMIN_MCLK (MTK_PIN_NO(181) | 5)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2S_IQ2_SDIA (MTK_PIN_NO(181) | 7)
+
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(182) | 1)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(182) | 2)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(182) | 3)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_DAI_SYNC (MTK_PIN_NO(182) | 4)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(182) | 5)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(182) | 6)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2S_IQ2_BCK (MTK_PIN_NO(182) | 7)
+
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(183) | 1)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(183) | 2)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(183) | 3)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_DAI_CLK (MTK_PIN_NO(183) | 4)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMIN_DI (MTK_PIN_NO(183) | 5)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(183) | 6)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2S_IQ2_WS (MTK_PIN_NO(183) | 7)
+
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(184) | 1)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(184) | 2)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(184) | 3)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_DAI_RX (MTK_PIN_NO(184) | 4)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMIN_LRCK (MTK_PIN_NO(184) | 5)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(184) | 6)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2S_IQ2_SDQA (MTK_PIN_NO(184) | 7)
+
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(185) | 1)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(185) | 2)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SO1_DO (MTK_PIN_NO(185) | 3)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SI2_DI (MTK_PIN_NO(185) | 4)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_MRG_RX (MTK_PIN_NO(185) | 5)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_PCM1_DI (MTK_PIN_NO(185) | 6)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(185) | 7)
+
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(186) | 1)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(186) | 2)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SO0_DO1 (MTK_PIN_NO(186) | 3)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SI1_DI (MTK_PIN_NO(186) | 4)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_MRG_TX (MTK_PIN_NO(186) | 5)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_PCM1_DO (MTK_PIN_NO(186) | 6)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(186) | 7)
+
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(187) | 1)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(187) | 2)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(187) | 3)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(187) | 4)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(187) | 5)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(187) | 6)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2S_IQ0_BCK (MTK_PIN_NO(187) | 7)
+
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(188) | 1)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(188) | 2)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(188) | 3)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(188) | 4)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_MRG_CLK (MTK_PIN_NO(188) | 5)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(188) | 6)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2S_IQ0_WS (MTK_PIN_NO(188) | 7)
+
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(189) | 1)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(189) | 2)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(189) | 3)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(189) | 4)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_MRG_RX (MTK_PIN_NO(189) | 5)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(189) | 6)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2S_IQ0_SDQA (MTK_PIN_NO(189) | 7)
+
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(190) | 1)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(190) | 2)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(190) | 3)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DI (MTK_PIN_NO(190) | 4)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_MRG_TX (MTK_PIN_NO(190) | 5)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DO (MTK_PIN_NO(190) | 6)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2S_IQ0_SDIA (MTK_PIN_NO(190) | 7)
+
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SO0_DO1 (MTK_PIN_NO(191) | 1)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI0_DI (MTK_PIN_NO(191) | 2)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI1_DI (MTK_PIN_NO(191) | 3)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI2_DI (MTK_PIN_NO(191) | 4)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_DAI_TX (MTK_PIN_NO(191) | 5)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(191) | 6)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ1_SDQB (MTK_PIN_NO(191) | 7)
+
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(192) | 1)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(192) | 2)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(192) | 3)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_USB4_FT_SCL (MTK_PIN_NO(192) | 4)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(192) | 5)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(192) | 6)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ1_SDQA (MTK_PIN_NO(192) | 7)
+
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(193) | 1)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(193) | 2)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(193) | 3)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_USB4_FT_SDA (MTK_PIN_NO(193) | 4)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2S_IQ1_SDIA (MTK_PIN_NO(193) | 7)
+
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(194) | 1)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(194) | 2)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(194) | 3)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_USB5_FT_SCL (MTK_PIN_NO(194) | 4)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(194) | 5)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2S_IQ1_WS (MTK_PIN_NO(194) | 7)
+
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(195) | 1)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(195) | 2)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(195) | 3)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_USB5_FT_SDA (MTK_PIN_NO(195) | 4)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(195) | 5)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2S_IQ1_BCK (MTK_PIN_NO(195) | 7)
+
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO1_MCLK (MTK_PIN_NO(196) | 1)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO0_MCLK (MTK_PIN_NO(196) | 2)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(196) | 3)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2SO0_DO1 (MTK_PIN_NO(196) | 6)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(196) | 7)
+
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_LRCK (MTK_PIN_NO(197) | 1)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_LRCK (MTK_PIN_NO(197) | 2)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(197) | 3)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(197) | 4)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(197) | 5)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_I2SO3_MCK (MTK_PIN_NO(197) | 6)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(197) | 7)
+
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_BCK (MTK_PIN_NO(198) | 1)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_BCK (MTK_PIN_NO(198) | 2)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(198) | 3)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(198) | 4)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(198) | 5)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_I2SO3_BCK (MTK_PIN_NO(198) | 6)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(198) | 7)
+
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA (MTK_PIN_NO(199) | 1)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA (MTK_PIN_NO(199) | 2)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(199) | 3)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(199) | 4)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(199) | 5)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_I2SO3_WS (MTK_PIN_NO(199) | 6)
+
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK0 (MTK_PIN_NO(200) | 1)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK0 (MTK_PIN_NO(200) | 2)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(200) | 3)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK1 (MTK_PIN_NO(200) | 4)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK1 (MTK_PIN_NO(200) | 5)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_MRG_TX (MTK_PIN_NO(200) | 6)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(200) | 7)
+
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK0 (MTK_PIN_NO(201) | 1)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK0 (MTK_PIN_NO(201) | 2)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(201) | 3)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK1 (MTK_PIN_NO(201) | 4)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK1 (MTK_PIN_NO(201) | 5)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_MRG_RX (MTK_PIN_NO(201) | 6)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(201) | 7)
+
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK0 (MTK_PIN_NO(202) | 1)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK0 (MTK_PIN_NO(202) | 2)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(202) | 3)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK1 (MTK_PIN_NO(202) | 4)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK1 (MTK_PIN_NO(202) | 5)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(202) | 6)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(202) | 7)
+
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA0 (MTK_PIN_NO(203) | 1)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA0 (MTK_PIN_NO(203) | 2)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_PCM1_DO (MTK_PIN_NO(203) | 3)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(203) | 4)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(203) | 5)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_MRG_CLK (MTK_PIN_NO(203) | 6)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_I2SO2_DO (MTK_PIN_NO(203) | 7)
+
+#define MT2712_PIN_204_PERSTB_P0__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define MT2712_PIN_204_PERSTB_P0__FUNC_PERST_B_P0 (MTK_PIN_NO(204) | 1)
+
+#define MT2712_PIN_205_CLKREQN_P0__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define MT2712_PIN_205_CLKREQN_P0__FUNC_CLKREQ_N_P0 (MTK_PIN_NO(205) | 1)
+
+#define MT2712_PIN_206_WAKEEN_P0__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define MT2712_PIN_206_WAKEEN_P0__FUNC_WAKE_EN_P0 (MTK_PIN_NO(206) | 1)
+
+#define MT2712_PIN_207_PERSTB_P1__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define MT2712_PIN_207_PERSTB_P1__FUNC_PERST_B_P1 (MTK_PIN_NO(207) | 1)
+
+#define MT2712_PIN_208_CLKREQN_P1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define MT2712_PIN_208_CLKREQN_P1__FUNC_CLKREQ_N_P1 (MTK_PIN_NO(208) | 1)
+
+#define MT2712_PIN_209_WAKEEN_P1__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define MT2712_PIN_209_WAKEEN_P1__FUNC_WAKE_EN_P1 (MTK_PIN_NO(209) | 1)
+
+#endif /* __DTS_MT2712_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
new file mode 100644
index 0000000000..ed1a9d3194
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -0,0 +1,1135 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/clock/mt2712-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt2712-larb-port.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt2712-power.h>
+#include "mt2712-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt2712";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp00 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <793000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp00 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <793000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <897000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x000>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				<&topckgen CLK_TOP_F_MP0_PLL1>;
+			clock-names = "cpu", "intermediate";
+			proc-supply = <&cpus_fixed_vproc0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x001>;
+			enable-method = "psci";
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				<&topckgen CLK_TOP_F_MP0_PLL1>;
+			clock-names = "cpu", "intermediate";
+			proc-supply = <&cpus_fixed_vproc0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				<&topckgen CLK_TOP_F_BIG_PLL1>;
+			clock-names = "cpu", "intermediate";
+			proc-supply = <&cpus_fixed_vproc1>;
+			operating-points-v2 = <&cluster1_opp>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <80>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <350>;
+				exit-latency-us = <80>;
+				min-residency-us = <3000>;
+				arm,psci-suspend-param = <0x1010000>;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	baud_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	sys_clk: dummyclk {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	clkfpc: oscillator-50m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "clkfpc";
+	};
+
+	clkaud_ext_i_0: oscillator-aud0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <6500000>;
+		clock-output-names = "clkaud_ext_i_0";
+	};
+
+	clkaud_ext_i_1: oscillator-aud1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <196608000>;
+		clock-output-names = "clkaud_ext_i_1";
+	};
+
+	clkaud_ext_i_2: oscillator-aud2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <180633600>;
+		clock-output-names = "clkaud_ext_i_2";
+	};
+
+	clki2si0_mck_i: oscillator-i2s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si0_mck_i";
+	};
+
+	clki2si1_mck_i: oscillator-i2s1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si1_mck_i";
+	};
+
+	clki2si2_mck_i: oscillator-i2s2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si2_mck_i";
+	};
+
+	clktdmin_mclk_i: oscillator-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clktdmin_mclk_i";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt2712-topckgen", "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt2712-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt2712-pericfg", "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	syscfg_pctl_a: syscfg_pctl_a@10005000 {
+		compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
+	pio: pinctrl@1000b000 {
+		compatible = "mediatek,mt2712-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt2712-scpsys", "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_VENC_SEL>,
+			 <&topckgen CLK_TOP_JPGDEC_SEL>,
+			 <&topckgen CLK_TOP_A1SYS_HP_SEL>,
+			 <&topckgen CLK_TOP_VDEC_SEL>;
+		clock-names = "mm", "mfg", "venc",
+			"jpgdec", "audio", "vdec";
+		infracfg = <&infracfg>;
+	};
+
+	uart5: serial@1000f000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x1000f000 0 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 10
+			&apdma 11>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	rtc: rtc@10011000 {
+		compatible = "mediatek,mt2712-rtc";
+		reg = <0 0x10011000 0 0x1000>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	spis1: spi@10013000 {
+		compatible = "mediatek,mt2712-spi-slave";
+		reg = <0 0x10013000 0 0x100>;
+		interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+		clock-names = "spi";
+		assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+		status = "disabled";
+	};
+
+	iommu0: iommu@10205000 {
+		compatible = "mediatek,mt2712-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,infracfg = <&infracfg>;
+		mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+				 <&larb3>, <&larb6>;
+		#iommu-cells = <1>;
+	};
+
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt2712-apmixedsys", "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	iommu1: iommu@1020a000 {
+		compatible = "mediatek,mt2712-m4u";
+		reg = <0 0x1020a000 0 0x1000>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,infracfg = <&infracfg>;
+		mediatek,larbs = <&larb4>, <&larb5>, <&larb7>;
+		#iommu-cells = <1>;
+	};
+
+	mcucfg: syscon@10220000 {
+		compatible = "mediatek,mt2712-mcucfg", "syscon";
+		reg = <0 0x10220000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	sysirq: interrupt-controller@10220a80 {
+		compatible = "mediatek,mt2712-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10220a80 0 0x40>;
+	};
+
+	gic: interrupt-controller@10510000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0 0x10510000 0 0x10000>,
+		      <0 0x10520000 0 0x20000>,
+		      <0 0x10540000 0 0x20000>,
+		      <0 0x10560000 0 0x20000>;
+		interrupts = <GIC_PPI 9
+			 (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	apdma: dma-controller@11000400 {
+		compatible = "mediatek,mt2712-uart-dma",
+			     "mediatek,mt6577-uart-dma";
+		reg = <0 0x11000400 0 0x80>,
+		      <0 0x11000480 0 0x80>,
+		      <0 0x11000500 0 0x80>,
+		      <0 0x11000580 0 0x80>,
+		      <0 0x11000600 0 0x80>,
+		      <0 0x11000680 0 0x80>,
+		      <0 0x11000700 0 0x80>,
+		      <0 0x11000780 0 0x80>,
+		      <0 0x11000800 0 0x80>,
+		      <0 0x11000880 0 0x80>,
+		      <0 0x11000900 0 0x80>,
+		      <0 0x11000980 0 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+		dma-requests = <12>;
+		clocks = <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "apdma";
+		#dma-cells = <1>;
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt2712-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 0
+			&apdma 1>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 2
+			&apdma 3>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 4
+			&apdma 5>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 6
+			&apdma 7>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt2712-pwm";
+		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM>,
+			 <&pericfg CLK_PERI_PWM0>,
+			 <&pericfg CLK_PERI_PWM1>,
+			 <&pericfg CLK_PERI_PWM2>,
+			 <&pericfg CLK_PERI_PWM3>,
+			 <&pericfg CLK_PERI_PWM4>,
+			 <&pericfg CLK_PERI_PWM5>,
+			 <&pericfg CLK_PERI_PWM6>,
+			 <&pericfg CLK_PERI_PWM7>;
+		clock-names = "top",
+			      "main",
+			      "pwm1",
+			      "pwm2",
+			      "pwm3",
+			      "pwm4",
+			      "pwm5",
+			      "pwm6",
+			      "pwm7",
+			      "pwm8";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11007000 0 0x90>,
+		      <0 0x11000180 0 0x80>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C0>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11008000 0 0x90>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C1>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11009000 0 0x90>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C2>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&pericfg CLK_PERI_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	nandc: nand-controller@1100e000 {
+		compatible = "mediatek,mt2712-nfc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_NFI2X_EN>, <&pericfg CLK_PERI_NFI>;
+		clock-names = "nfi_clk", "pad_clk";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	bch: ecc@1100f000 {
+		compatible = "mediatek,mt2712-ecc";
+		reg = <0 0x1100f000 0 0x1000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_NFI1X_CK_EN>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	i2c3: i2c@11010000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11010000 0 0x90>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C3>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@11011000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11011000 0 0x90>,
+		      <0 0x11000380 0 0x80>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C4>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@11013000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11013000 0 0x90>,
+		      <0 0x11000100 0 0x80>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C5>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@11015000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11015000 0 0x100>;
+		interrupts = <GIC_SPI 284 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&pericfg CLK_PERI_SPI2>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi3: spi@11016000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&pericfg CLK_PERI_SPI3>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi4: spi@10012000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x10012000 0 0x100>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&infracfg CLK_INFRA_AO_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi5: spi@11018000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11018000 0 0x100>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&pericfg CLK_PERI_SPI5>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	uart4: serial@11019000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11019000 0 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 8
+			&apdma 9>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <0x7>;
+		snps,rd_osr_lmt = <0x7>;
+		snps,blen = <0 0 0 0 16 8 4>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		snps,rx-sched-sp;
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,priority = <0x0>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <3>;
+		snps,tx-sched-wrr;
+		queue0 {
+			snps,weight = <0x10>;
+			snps,dcb-algorithm;
+			snps,priority = <0x0>;
+		};
+		queue1 {
+			snps,weight = <0x11>;
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+		queue2 {
+			snps,weight = <0x12>;
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+	};
+
+	eth: ethernet@1101c000 {
+		compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
+		reg = <0 0x1101c000 0 0x1300>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "macirq";
+		mac-address = [00 55 7b b5 7d f7];
+		clock-names = "axi",
+			      "apb",
+			      "mac_main",
+			      "ptp_ref",
+			      "rmii_internal";
+		clocks = <&pericfg CLK_PERI_GMAC>,
+			 <&pericfg CLK_PERI_GMAC_PCLK>,
+			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
+			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
+				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
+				  <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
+					 <&topckgen CLK_TOP_APLL1_D3>,
+					 <&topckgen CLK_TOP_ETHERPLL_50M>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
+		mediatek,pericfg = <&pericfg>;
+		snps,axi-config = <&stmmac_axi_setup>;
+		snps,mtl-rx-config = <&mtl_rx_setup>;
+		snps,mtl-tx-config = <&mtl_tx_setup>;
+		snps,txpbl = <1>;
+		snps,rxpbl = <1>;
+		snps,clk-csr = <0>;
+		status = "disabled";
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt2712-mmc";
+		reg = <0 0x11230000 0 0x1000>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0>,
+			 <&pericfg CLK_PERI_MSDC50_0_HCLK_EN>,
+			 <&pericfg CLK_PERI_MSDC50_0_EN>,
+			 <&pericfg CLK_PERI_MSDC30_0_QTR_EN>;
+		clock-names = "source", "hclk", "source_cg", "bus_clk";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt2712-mmc";
+		reg = <0 0x11240000 0 0x1000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1>,
+			 <&topckgen CLK_TOP_AXI_SEL>,
+			 <&pericfg CLK_PERI_MSDC30_1_EN>;
+		clock-names = "source", "hclk", "source_cg";
+		status = "disabled";
+	};
+
+	mmc2: mmc@11250000 {
+		compatible = "mediatek,mt2712-mmc";
+		reg = <0 0x11250000 0 0x1000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_2>,
+			 <&topckgen CLK_TOP_AXI_SEL>,
+			 <&pericfg CLK_PERI_MSDC30_2_EN>;
+		clock-names = "source", "hclk", "source_cg";
+		status = "disabled";
+	};
+
+	ssusb: usb@11271000 {
+		compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
+		reg = <0 0x11271000 0 0x3000>,
+		      <0 0x11280700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
+		phys = <&u2port0 PHY_TYPE_USB2>,
+		       <&u2port1 PHY_TYPE_USB2>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
+		clocks = <&topckgen CLK_TOP_USB30_SEL>;
+		clock-names = "sys_ck";
+		mediatek,syscon-wakeup = <&pericfg 0x510 2>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb_host0: usb@11270000 {
+			compatible = "mediatek,mt2712-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11270000 0 0x1000>;
+			reg-names = "mac";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+			clock-names = "sys_ck", "ref_ck";
+			status = "disabled";
+		};
+	};
+
+	u3phy0: t-phy@11290000 {
+		compatible = "mediatek,mt2712-tphy",
+			     "mediatek,generic-tphy-v2";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x11290000 0x9000>;
+		status = "okay";
+
+		u2port0: usb-phy@0 {
+			reg = <0x0 0x700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u2port1: usb-phy@8000 {
+			reg = <0x8000 0x700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port0: usb-phy@8700 {
+			reg = <0x8700 0x900>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ssusb1: usb@112c1000 {
+		compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
+		reg = <0 0x112c1000 0 0x3000>,
+		      <0 0x112d0700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>;
+		phys = <&u2port2 PHY_TYPE_USB2>,
+		       <&u2port3 PHY_TYPE_USB2>,
+		       <&u3port1 PHY_TYPE_USB3>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
+		clocks = <&topckgen CLK_TOP_USB30_SEL>;
+		clock-names = "sys_ck";
+		mediatek,syscon-wakeup = <&pericfg 0x514 2>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb_host1: usb@112c0000 {
+			compatible = "mediatek,mt2712-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112c0000 0 0x1000>;
+			reg-names = "mac";
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+			clock-names = "sys_ck", "ref_ck";
+			status = "disabled";
+		};
+	};
+
+	u3phy1: t-phy@112e0000 {
+		compatible = "mediatek,mt2712-tphy",
+			     "mediatek,generic-tphy-v2";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x112e0000 0x9000>;
+		status = "okay";
+
+		u2port2: usb-phy@0 {
+			reg = <0x0 0x700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u2port3: usb-phy@8000 {
+			reg = <0x8000 0x700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port1: usb-phy@8700 {
+			reg = <0x8700 0x900>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	pcie1: pcie@112ff000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x112ff000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+			 <&pericfg CLK_PERI_PCIE1>;
+		clock-names = "sys_ck1", "ahb_ck1";
+		phys = <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie0: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>;
+		clock-names = "sys_ck0", "ahb_ck0";
+		phys = <&u3port0 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	mfgcfg: syscon@13000000 {
+		compatible = "mediatek,mt2712-mfgcfg", "syscon";
+		reg = <0 0x13000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt2712-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb0: larb@14021000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x14021000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <0>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+	};
+
+	smi_common0: smi@14022000 {
+		compatible = "mediatek,mt2712-smi-common";
+		reg = <0 0x14022000 0 0x1000>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_COMMON>,
+			 <&mmsys CLK_MM_SMI_COMMON>;
+		clock-names = "apb", "smi";
+	};
+
+	larb4: larb@14027000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x14027000 0 0x1000>;
+		mediatek,smi = <&smi_common1>;
+		mediatek,larb-id = <4>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_LARB4>,
+			 <&mmsys CLK_MM_SMI_LARB4>;
+		clock-names = "apb", "smi";
+	};
+
+	larb5: larb@14030000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x14030000 0 0x1000>;
+		mediatek,smi = <&smi_common1>;
+		mediatek,larb-id = <5>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_LARB5>,
+			 <&mmsys CLK_MM_SMI_LARB5>;
+		clock-names = "apb", "smi";
+	};
+
+	smi_common1: smi@14031000 {
+		compatible = "mediatek,mt2712-smi-common";
+		reg = <0 0x14031000 0 0x1000>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_COMMON1>,
+			 <&mmsys CLK_MM_SMI_COMMON1>;
+		clock-names = "apb", "smi";
+	};
+
+	larb7: larb@14032000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x14032000 0 0x1000>;
+		mediatek,smi = <&smi_common1>;
+		mediatek,larb-id = <7>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_LARB7>,
+			 <&mmsys CLK_MM_SMI_LARB7>;
+		clock-names = "apb", "smi";
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt2712-imgsys", "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <2>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
+		clocks = <&imgsys CLK_IMG_SMI_LARB2>,
+			 <&imgsys CLK_IMG_SMI_LARB2>;
+		clock-names = "apb", "smi";
+	};
+
+	bdpsys: syscon@15010000 {
+		compatible = "mediatek,mt2712-bdpsys", "syscon";
+		reg = <0 0x15010000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt2712-vdecsys", "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <1>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_VDEC>;
+		clocks = <&vdecsys CLK_VDEC_CKEN>,
+			 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+		clock-names = "apb", "smi";
+	};
+
+	vencsys: syscon@18000000 {
+		compatible = "mediatek,mt2712-vencsys", "syscon";
+		reg = <0 0x18000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb3: larb@18001000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x18001000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <3>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>;
+		clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>,
+			 <&vencsys CLK_VENC_VENC>;
+		clock-names = "apb", "smi";
+	};
+
+	larb6: larb@18002000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x18002000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <6>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>;
+		clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>,
+			 <&vencsys CLK_VENC_VENC>;
+		clock-names = "apb", "smi";
+	};
+
+	jpgdecsys: syscon@19000000 {
+		compatible = "mediatek,mt2712-jpgdecsys", "syscon";
+		reg = <0 0x19000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt6331.dtsi b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
new file mode 100644
index 0000000000..d89858c73a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2023 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	pmic: mt6331 {
+		compatible = "mediatek,mt6331";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6331regulator: mt6331regulator {
+			compatible = "mediatek,mt6331-regulator";
+
+			mt6331_vdvfs11_reg: buck-vdvfs11 {
+				regulator-name = "vdvfs11";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vdvfs12_reg: buck-vdvfs12 {
+				regulator-name = "vdvfs12";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vdvfs13_reg: buck-vdvfs13 {
+				regulator-name = "vdvfs13";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vdvfs14_reg: buck-vdvfs14 {
+				regulator-name = "vdvfs14";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vcore2_reg: buck-vcore2 {
+				regulator-name = "vcore2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vio18_reg: buck-vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vtcxo1_reg: ldo-vtcxo1 {
+				regulator-name = "vtcxo1";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vtcxo2_reg: ldo-vtcxo2 {
+				regulator-name = "vtcxo2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_avdd32_aud_reg: ldo-avdd32aud {
+				regulator-name = "avdd32_aud";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vauxa32_reg: ldo-vauxa32 {
+				regulator-name = "vauxa32";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vcama_reg: ldo-vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vio28_reg: ldo-vio28 {
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vcamaf_reg: ldo-vcamaf {
+				regulator-name = "vcam_af";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vmc_reg: ldo-vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vmch_reg: ldo-vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vemc33_reg: ldo-vemc33 {
+				regulator-name = "vemc33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vgp1_reg: ldo-vgp1 {
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vsim1_reg: ldo-vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vsim2_reg: ldo-vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vmipi_reg: ldo-vmipi {
+				regulator-name = "vmipi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vibr_reg: ldo-vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vgp4_reg: ldo-vgp4 {
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vcamd_reg: ldo-vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vusb10_reg: ldo-vusb10 {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vcamio_reg: ldo-vcamio {
+				regulator-name = "vcam_io";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vsram_reg: ldo-vsram {
+				regulator-name = "vsram";
+				regulator-min-microvolt = <1012500>;
+				regulator-max-microvolt = <1012500>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vgp2_reg: ldo-vgp2 {
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vgp3_reg: ldo-vgp3 {
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vrtc_reg: ldo-vrtc {
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vdig18_reg: ldo-vdig18 {
+				regulator-name = "dvdd18_dig";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+		};
+
+		mt6331rtc: mt6331rtc {
+			compatible = "mediatek,mt6331-rtc";
+		};
+
+		mt6331keys: mt6331keys {
+			compatible = "mediatek,mt6331-keys";
+			power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+			home {
+				linux,keycodes = <KEY_HOME>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
new file mode 100644
index 0000000000..3330a03c2f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Copyright (c) 2023 BayLibre Inc.
+ */
+
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	mt6357_pmic: pmic {
+		compatible = "mediatek,mt6357";
+
+		regulators {
+			mt6357_vproc_reg: buck-vproc {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vcore_reg: buck-vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vmodem_reg: buck-vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vs1_reg: buck-vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vpa_reg: buck-vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-ramp-delay = <50000>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vfe28_reg: ldo-vfe28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vxo22_reg: ldo-vxo22 {
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf18_reg: ldo-vrf18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf12_reg: ldo-vrf12 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vefuse_reg: ldo-vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_bt_reg: ldo-vcn33-bt {
+				regulator-name = "vcn33-bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_wifi_reg: ldo-vcn33-wifi {
+				regulator-name = "vcn33-wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn28_reg: ldo-vcn28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn18_reg: ldo-vcn18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcama_reg: ldo-vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamd_reg: ldo-vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamio_reg: ldo-vcamio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vldo28_reg: ldo-vldo28 {
+				regulator-name = "vldo28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsram_others_reg: ldo-vsram-others {
+				regulator-name = "vsram-others";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vsram_proc_reg: ldo-vsram-proc {
+				regulator-name = "vsram-proc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vaux18_reg: ldo-vaux18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vaud28_reg: ldo-vaud28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio28_reg: ldo-vio28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio18_reg: ldo-vio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+			};
+
+			mt6357_vdram_reg: ldo-vdram {
+				regulator-name = "vdram";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <3300>;
+			};
+
+			mt6357_vmc_reg: ldo-vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vmch_reg: ldo-vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vemc_reg: ldo-vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+				regulator-always-on;
+			};
+
+			mt6357_vsim1_reg: ldo-vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsim2_reg: ldo-vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vibr_reg: ldo-vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vusb33_reg: ldo-vusb33 {
+				regulator-name = "vusb33";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+		};
+
+		rtc {
+			compatible = "mediatek,mt6357-rtc";
+		};
+
+		keys {
+			compatible = "mediatek,mt6357-keys";
+
+			key-power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+
+			key-home {
+				linux,keycodes = <KEY_HOME>;
+				wakeup-source;
+			};
+
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
new file mode 100644
index 0000000000..b605313bed
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ */
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	pmic: pmic {
+		compatible = "mediatek,mt6358";
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+
+		mt6358codec: mt6358codec {
+			compatible = "mediatek,mt6358-sound";
+			mediatek,dmic-mode = <0>; /* two-wires */
+		};
+
+		mt6358regulator: mt6358regulator {
+			compatible = "mediatek,mt6358-regulator";
+
+			mt6358_vdram1_reg: buck_vdram1 {
+				regulator-name = "vdram1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2087500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vcore_reg: buck_vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vpa_reg: buck_vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-ramp-delay = <50000>;
+				regulator-enable-ramp-delay = <250>;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vproc11_reg: buck_vproc11 {
+				regulator-name = "vproc11";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vproc12_reg: buck_vproc12 {
+				regulator-name = "vproc12";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vgpu_reg: buck_vgpu {
+				regulator-name = "vgpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vs2_reg: buck_vs2 {
+				regulator-name = "vs2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2087500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vmodem_reg: buck_vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <900>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vs1_reg: buck_vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <2587500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vdram2_reg: ldo_vdram2 {
+				regulator-name = "vdram2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <3300>;
+			};
+
+			mt6358_vsim1_reg: ldo_vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6358_vibr_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vrf12_reg: ldo_vrf12 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6358_vio18_reg: ldo_vio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <2700>;
+				regulator-always-on;
+			};
+
+			mt6358_vusb_reg: ldo_vusb {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6358_vcamio_reg: ldo_vcamio {
+				compatible = "regulator-fixed";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <325>;
+			};
+
+			mt6358_vcamd_reg: ldo_vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <325>;
+			};
+
+			mt6358_vcn18_reg: ldo_vcn18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vfe28_reg: ldo_vfe28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_proc11_reg: ldo_vsram_proc11 {
+				regulator-name = "vsram_proc11";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vcn28_reg: ldo_vcn28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_others_reg: ldo_vsram_others {
+				regulator-name = "vsram_others";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vsram_gpu_reg: ldo_vsram_gpu {
+				regulator-name = "vsram_gpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6358_vxo22_reg: ldo_vxo22 {
+				compatible = "regulator-fixed";
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <120>;
+				regulator-always-on;
+			};
+
+			mt6358_vefuse_reg: ldo_vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vaux18_reg: ldo_vaux18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vmch_reg: ldo_vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vbif28_reg: ldo_vbif28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vbif28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_proc12_reg: ldo_vsram_proc12 {
+				regulator-name = "vsram_proc12";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vcama1_reg: ldo_vcama1 {
+				regulator-name = "vcama1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <325>;
+			};
+
+			mt6358_vemc_reg: ldo_vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vio28_reg: ldo_vio28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_va12_reg: ldo_va12 {
+				compatible = "regulator-fixed";
+				regulator-name = "va12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6358_vrf18_reg: ldo_vrf18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcama2_reg: ldo_vcama2 {
+				regulator-name = "vcama2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <325>;
+			};
+
+			mt6358_vmc_reg: ldo_vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vldo28_reg: ldo_vldo28 {
+				regulator-name = "vldo28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vaud28_reg: ldo_vaud28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsim2_reg: ldo_vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+		};
+
+		mt6358rtc: rtc {
+			compatible = "mediatek,mt6358-rtc";
+		};
+
+		mt6358keys: keys {
+			compatible = "mediatek,mt6358-keys";
+			power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+			home {
+				linux,keycodes = <KEY_HOME>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
new file mode 100644
index 0000000000..df3e822232
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+
+&pwrap {
+	pmic: pmic {
+		compatible = "mediatek,mt6359";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6359codec: mt6359codec {
+		};
+
+		regulators {
+			mt6359_vs1_buck_reg: buck_vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+			mt6359_vgpu11_buck_reg: buck_vgpu11 {
+				regulator-name = "vgpu11";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <5000>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vmodem_buck_reg: buck_vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <10760>;
+				regulator-enable-ramp-delay = <200>;
+			};
+			mt6359_vpu_buck_reg: buck_vpu {
+				regulator-name = "vpu";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <5000>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vcore_buck_reg: buck_vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <5000>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vs2_buck_reg: buck_vs2 {
+				regulator-name = "vs2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1600000>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+			mt6359_vpa_buck_reg: buck_vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-enable-ramp-delay = <300>;
+			};
+			mt6359_vproc2_buck_reg: buck_vproc2 {
+				regulator-name = "vproc2";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <7500>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vproc1_buck_reg: buck_vproc1 {
+				regulator-name = "vproc1";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <7500>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vcore_sshub_buck_reg: buck_vcore_sshub {
+				regulator-name = "vcore_sshub";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+			};
+			mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub {
+				regulator-name = "vgpu11_sshub";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+			};
+			mt6359_vaud18_ldo_reg: ldo_vaud18 {
+				regulator-name = "vaud18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vsim1_ldo_reg: ldo_vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+			};
+			mt6359_vibr_ldo_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			mt6359_vrf12_ldo_reg: ldo_vrf12 {
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+			};
+			mt6359_vusb_ldo_reg: ldo_vusb {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <960>;
+				regulator-always-on;
+			};
+			mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
+				regulator-name = "vsram_proc2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <7500>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+			mt6359_vio18_ldo_reg: ldo_vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-enable-ramp-delay = <960>;
+				regulator-always-on;
+			};
+			mt6359_vcamio_ldo_reg: ldo_vcamio {
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+			};
+			mt6359_vcn18_ldo_reg: ldo_vcn18 {
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vfe28_ldo_reg: ldo_vfe28 {
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+			mt6359_vcn13_ldo_reg: ldo_vcn13 {
+				regulator-name = "vcn13";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1300000>;
+			};
+			mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt {
+				regulator-name = "vcn33_1_bt";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3500000>;
+			};
+			mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi {
+				regulator-name = "vcn33_1_wifi";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3500000>;
+			};
+			mt6359_vaux18_ldo_reg: ldo_vaux18 {
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+			mt6359_vsram_others_ldo_reg: ldo_vsram_others {
+				regulator-name = "vsram_others";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <5000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vefuse_ldo_reg: ldo_vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2000000>;
+			};
+			mt6359_vxo22_ldo_reg: ldo_vxo22 {
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-always-on;
+			};
+			mt6359_vrfck_ldo_reg: ldo_vrfck {
+				regulator-name = "vrfck";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1700000>;
+			};
+			mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 {
+				regulator-name = "vrfck";
+				regulator-min-microvolt = <1240000>;
+				regulator-max-microvolt = <1600000>;
+			};
+			mt6359_vbif28_ldo_reg: ldo_vbif28 {
+				regulator-name = "vbif28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vio28_ldo_reg: ldo_vio28 {
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			mt6359_vemc_ldo_reg: ldo_vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			mt6359_vemc_1_ldo_reg: ldo_vemc_1 {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt {
+				regulator-name = "vcn33_2_bt";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3500000>;
+			};
+			mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi {
+				regulator-name = "vcn33_2_wifi";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3500000>;
+			};
+			mt6359_va12_ldo_reg: ldo_va12 {
+				regulator-name = "va12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+			};
+			mt6359_va09_ldo_reg: ldo_va09 {
+				regulator-name = "va09";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1200000>;
+			};
+			mt6359_vrf18_ldo_reg: ldo_vrf18 {
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1810000>;
+			};
+			mt6359_vsram_md_ldo_reg: ldo_vsram_md {
+				regulator-name = "vsram_md";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <10760>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vufs_ldo_reg: ldo_vufs {
+				regulator-name = "vufs";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+			};
+			mt6359_vm18_ldo_reg: ldo_vm18 {
+				regulator-name = "vm18";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-always-on;
+			};
+			mt6359_vbbck_ldo_reg: ldo_vbbck {
+				regulator-name = "vbbck";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+			};
+			mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 {
+				regulator-name = "vsram_proc1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <7500>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+			mt6359_vsim2_ldo_reg: ldo_vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+			};
+			mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub {
+				regulator-name = "vsram_others_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
+		};
+
+		mt6359rtc: mt6359rtc {
+			compatible = "mediatek,mt6358-rtc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6380.dtsi b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
new file mode 100644
index 0000000000..53b335d2de
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for MediaTek MT6380 regulator
+ *
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu@mediatek.com>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ */
+
+&pwrap {
+	regulators {
+		compatible = "mediatek,mt6380-regulator";
+
+		mt6380_vcpu_reg: buck-vcore1 {
+			regulator-name = "vcore1";
+			regulator-min-microvolt = < 600000>;
+			regulator-max-microvolt = <1393750>;
+			regulator-ramp-delay = <6250>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vcore_reg: buck-vcore {
+			regulator-name = "vcore";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1393750>;
+			regulator-ramp-delay = <6250>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vrf_reg: buck-vrf {
+			regulator-name = "vrf";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1575000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vm_reg: ldo-vm {
+			regulator-name = "vm";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_va_reg: ldo-va {
+			regulator-name = "va";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vphy_reg: ldo-vphy {
+			regulator-name = "vphy";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vddr_reg: ldo-vddr {
+			regulator-name = "vddr";
+			regulator-min-microvolt = <1240000>;
+			regulator-max-microvolt = <1840000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vt_reg: ldo-vt {
+			regulator-name = "vt";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6755-evb.dts b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
new file mode 100644
index 0000000000..00b14f85c6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt6755.dtsi"
+
+/ {
+	model = "MediaTek MT6755 EVB";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6755.dtsi b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
new file mode 100644
index 0000000000..b55d3fac9b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt6755";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x001>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x002>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x003>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	sysirq: intpol-controller@10200620 {
+		compatible = "mediatek,mt6755-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200620 0 0x20>;
+	};
+
+	gic: interrupt-controller@10231000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0 0x10231000 0 0x1000>,
+		      <0 0x10232000 0 0x2000>,
+		      <0 0x10234000 0 0x2000>,
+		      <0 0x10236000 0 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6755-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6755-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
new file mode 100644
index 0000000000..56b1bf06e2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6779.dtsi"
+
+/ {
+	model = "MediaTek MT6779 EVB";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
new file mode 100644
index 0000000000..5c579e88e7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt6779-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+/ {
+	compatible = "mediatek,mt6779";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x200>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x300>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x400>;
+		};
+
+		cpu5: cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x500>;
+		};
+
+		cpu6: cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			enable-method = "psci";
+			reg = <0x600>;
+		};
+
+		cpu7: cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			enable-method = "psci";
+			reg = <0x700>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c040000 0 0x200000>; /* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 \
+						&cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+
+		};
+
+		sysirq: intpol-controller@c53a650 {
+			compatible = "mediatek,mt6779-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x0c53a650 0 0x50>;
+		};
+
+		topckgen: clock-controller@10000000 {
+			compatible = "mediatek,mt6779-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: clock-controller@10001000 {
+			compatible = "mediatek,mt6779-infracfg_ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt6779-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c20000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e70000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x11f20000 0 0x1000>,
+			      <0 0x11f30000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rm",
+				    "iocfg_br", "iocfg_lm",
+				    "iocfg_lb", "iocfg_rt",
+				    "iocfg_lt", "iocfg_tl",
+				    "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 210>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apmixed: clock-controller@1000c000 {
+			compatible = "mediatek,mt6779-apmixed", "syscon";
+			reg = <0 0x1000c000 0 0xe00>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt6779-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_PMIC_AP>;
+			clock-names = "spi", "wrap";
+		};
+
+		devapc: devapc@10207000 {
+			compatible = "mediatek,mt6779-devapc";
+			reg = <0 0x10207000 0 0x1000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>;
+			clock-names = "devapc-infra-clock";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		audio: clock-controller@11210000 {
+			compatible = "mediatek,mt6779-audio", "syscon";
+			reg = <0 0x11210000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt6779-mfgcfg", "syscon";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt6779-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys: clock-controller@15020000 {
+			compatible = "mediatek,mt6779-imgsys", "syscon";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt6779-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@17000000 {
+			compatible = "mediatek,mt6779-vencsys", "syscon";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt6779-camsys", "syscon";
+			reg = <0 0x1a000000 0 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@1b000000 {
+			compatible = "mediatek,mt6779-ipesys", "syscon";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
new file mode 100644
index 0000000000..e0d4d7a631
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt6795.dtsi"
+
+/ {
+	model = "MediaTek MT6795 Evaluation Board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
new file mode 100644
index 0000000000..b5746e6d0b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Collabora Ltd
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt6795.dtsi"
+#include "mt6331.dtsi"
+
+/ {
+	model = "Sony Xperia M5";
+	compatible = "sony,xperia-m5", "mediatek,mt6795";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+
+		/* preloader and bootloader regions cannot be touched */
+		preloader-region@44800000 {
+			reg = <0 0x44800000 0 0x100000>;
+			no-map;
+		};
+
+		bootloader-region@46000000 {
+			reg = <0 0x46000000 0 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&fhctl {
+	clocks = <&apmixedsys CLK_APMIXED_MAINPLL>, <&apmixedsys CLK_APMIXED_MPLL>,
+		 <&apmixedsys CLK_APMIXED_MSDCPLL>;
+	mediatek,hopping-ssc-percent = <8>, <5>, <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	accelerometer@10 {
+		compatible = "bosch,bma255";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_pins>;
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmm150";
+		reg = <0x12>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_pins>;
+		syna,startup-delay-ms = <160>;
+		syna,reset-delay-ms = <90>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	pn547: nfc@28 {
+		compatible = "nxp,pn544-i2c";
+		reg = <0x28>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_pins>;
+		enable-gpios = <&pio 149 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&pio 94 GPIO_ACTIVE_HIGH>;
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3310";
+		reg = <0x48>;
+		interrupts-extended = <&pio 8 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&proximity_pins>;
+	};
+};
+
+&mmc0 {
+	/* eMMC controller */
+	mediatek,latch-ck = <0x14>; /* hs400 */
+	mediatek,hs200-cmd-int-delay = <1>;
+	mediatek,hs400-cmd-int-delay = <1>;
+	mediatek,hs400-ds-dly3 = <0x1a>;
+	non-removable;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&mt6331_vemc33_reg>;
+	vqmmc-supply = <&mt6331_vio18_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	/* MicroSD card slot */
+	vmmc-supply = <&mt6331_vmc_reg>;
+	vqmmc-supply = <&mt6331_vmch_reg>;
+	status = "okay";
+};
+
+&mmc2 {
+	/* SDIO WiFi on MMC2 */
+	vmmc-supply = <&mt6331_vmc_reg>;
+	vqmmc-supply = <&mt6331_vmch_reg>;
+	status = "okay";
+};
+
+&pio {
+	mmc0_pins_default: emmc-sdr-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc0_pins_uhs: emmc-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nfc_pins: nfc-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
+			bias-pull-down;
+			input-enable;
+		};
+
+		pins-fw-ven {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>,
+				 <PINMUX_GPIO149__FUNC_GPIO149>;
+		};
+	};
+
+	ts_pins: touchscreen-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			bias-pull-up;
+			input-enable;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO102__FUNC_GPIO102>;
+			output-high;
+		};
+	};
+
+	proximity_pins: proximity-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	accel_pins: accelerometer-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
+				 <PINMUX_GPIO46__FUNC_SCL0>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO125__FUNC_SDA1>,
+				 <PINMUX_GPIO126__FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO43__FUNC_SDA2>,
+				 <PINMUX_GPIO44__FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA3>,
+				 <PINMUX_GPIO137__FUNC_SCL3>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO100__FUNC_SDA4>,
+				 <PINMUX_GPIO101__FUNC_SCL4>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO113__FUNC_URXD0>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO114__FUNC_UTXD0>;
+			output-high;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO31__FUNC_URXD2>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO32__FUNC_UTXD2>;
+		};
+	};
+};
+
+&pmic {
+	/*
+	 * Smartphones, including the Xperia M5, are equipped with a companion
+	 * MT6332 PMIC: when this is present, the main MT6331 PMIC will fire
+	 * an interrupt on the companion, so we use the MT6332 IRQ GPIO.
+	 */
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
new file mode 100644
index 0000000000..597bce2fed
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -0,0 +1,753 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mediatek,mt6795-clk.h>
+#include <dt-bindings/gce/mediatek,mt6795-gce.h>
+#include <dt-bindings/memory/mt6795-larb-port.h>
+#include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+#include <dt-bindings/power/mt6795-power.h>
+#include <dt-bindings/reset/mediatek,mt6795-resets.h>
+
+/ {
+	compatible = "mediatek,mt6795";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x000>;
+			cci-control-port = <&cci_control2>;
+			next-level-cache = <&l2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x001>;
+			cci-control-port = <&cci_control2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x002>;
+			cci-control-port = <&cci_control2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x003>;
+			cci-control-port = <&cci_control2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_1>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_1>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_1>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI  9 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt6795-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt6795-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt6795-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+			#power-domain-cells = <1>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt6795-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT6795_POWER_DOMAIN_VDEC {
+					reg = <MT6795_POWER_DOMAIN_VDEC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT6795_POWER_DOMAIN_VENC {
+					reg = <MT6795_POWER_DOMAIN_VENC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_VENC_SEL>;
+					clock-names = "mm", "venc";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT6795_POWER_DOMAIN_ISP {
+					reg = <MT6795_POWER_DOMAIN_ISP>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_MM {
+					reg = <MT6795_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_MJC {
+					reg = <MT6795_POWER_DOMAIN_MJC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_MJC_SEL>;
+					clock-names = "mm", "mjc";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_AUDIO {
+					reg = <MT6795_POWER_DOMAIN_AUDIO>;
+					#power-domain-cells = <0>;
+				};
+
+				mfg_async: power-domain@MT6795_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT6795_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&clk26m>;
+					clock-names = "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT6795_POWER_DOMAIN_MFG_2D {
+						reg = <MT6795_POWER_DOMAIN_MFG_2D>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT6795_POWER_DOMAIN_MFG {
+							reg = <MT6795_POWER_DOMAIN_MFG>;
+							#power-domain-cells = <0>;
+							mediatek,infracfg = <&infracfg>;
+						};
+					};
+				};
+			};
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt6795-pinctrl";
+			reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
+			reg-names = "base", "eint";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 196>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt6795-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
+			#reset-cells = <1>;
+			timeout-sec = <20>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6795-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&clk32k>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt6795-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT6795_INFRA_RST0_PMIC_WRAP_RST>;
+			reset-names = "pwrap";
+			clocks = <&topckgen CLK_TOP_PMICSPI_SEL>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: intpol-controller@10200620 {
+			compatible = "mediatek,mt6795-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		systimer: timer@10200670 {
+			compatible = "mediatek,mt6795-systimer";
+			reg = <0 0x10200670 0 0x10>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			clock-names = "clk13m";
+		};
+
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt6795-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_M4U>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larbs = <&larb0 &larb1 &larb2 &larb3>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			#iommu-cells = <1>;
+		};
+
+		apmixedsys: syscon@10209000 {
+			compatible = "mediatek,mt6795-apmixedsys", "syscon";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		fhctl: clock-controller@10209f00 {
+			compatible = "mediatek,mt6795-fhctl";
+			reg = <0 0x10209f00 0 0x100>;
+			status = "disabled";
+		};
+
+		gce: mailbox@10212000 {
+			compatible = "mediatek,mt6795-gce", "mediatek,mt8173-gce";
+			reg = <0 0x10212000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+			#mbox-cells = <2>;
+		};
+
+		gic: interrupt-controller@10221000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10221000 0 0x1000>,
+			      <0 0x10222000 0 0x2000>,
+			      <0 0x10224000 0 0x2000>,
+			      <0 0x10226000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cci: cci@10390000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x10390000 0 0x1000>;
+			ranges = <0 0 0x10390000 0x10000>;
+
+			cci_control0: slave-if@1000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace-lite";
+				reg = <0x1000 0x1000>;
+			};
+
+			cci_control1: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control2: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt6795-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0>, <&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt6795-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2>, <&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		apdma: dma-controller@11000380 {
+			compatible = "mediatek,mt6795-uart-dma",
+				     "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000380 0 0x60>,
+			      <0 0x11000400 0 0x60>,
+			      <0 0x11000480 0 0x60>,
+			      <0 0x11000500 0 0x60>,
+			      <0 0x11000580 0 0x60>,
+			      <0 0x11000600 0 0x60>,
+			      <0 0x11000680 0 0x60>,
+			      <0 0x11000700 0 0x60>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <8>;
+			clocks = <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "apdma";
+			mediatek,dma-33bits;
+			#dma-cells = <1>;
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt6795-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4>, <&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt6795-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 6>, <&apdma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		pwm2: pwm@11006000 {
+			compatible = "mediatek,mt6795-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM>,
+				 <&pericfg CLK_PERI_PWM1>,
+				 <&pericfg CLK_PERI_PWM2>,
+				 <&pericfg CLK_PERI_PWM3>,
+				 <&pericfg CLK_PERI_PWM4>,
+				 <&pericfg CLK_PERI_PWM5>,
+				 <&pericfg CLK_PERI_PWM6>,
+				 <&pericfg CLK_PERI_PWM7>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5", "pwm6", "pwm7";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11008000 0 0x70>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11009000 0 0x70>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11010000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C3>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C4>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11230000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_0>,
+				 <&topckgen CLK_TOP_MSDC50_0_H_SEL>,
+				 <&topckgen CLK_TOP_MSDC50_0_SEL>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11240000 0 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_1>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11250000 0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_2>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc3: mmc@11260000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11260000 0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_3>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt6795-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
+			assigned-clock-rates = <400000000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		larb0: larb@14021000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x14021000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <0>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+		};
+
+		smi_common: smi@14022000 {
+			compatible = "mediatek,mt6795-smi-common";
+			reg = <0 0x14022000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&infracfg CLK_INFRA_SMI>, <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+		};
+
+		larb2: larb@15001000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>, <&infracfg CLK_INFRA_SMI>;
+			clock-names = "apb", "smi";
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <2>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_ISP>;
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt6795-vdecsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb1: larb@16010000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <1>;
+			clocks = <&vdecsys CLK_VDEC_CKEN>, <&vdecsys CLK_VDEC_LARB_CKEN>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT6795_POWER_DOMAIN_VDEC>;
+		};
+
+		vencsys: clock-controller@18000000 {
+			compatible = "mediatek,mt6795-vencsys";
+			reg = <0 0x18000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb3: larb@18001000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x18001000 0 0x1000>;
+			clocks = <&vencsys CLK_VENC_VENC>, <&vencsys CLK_VENC_LARB>;
+			clock-names = "apb", "smi";
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <3>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_VENC>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
new file mode 100644
index 0000000000..c927932afa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt6797.dtsi"
+
+/ {
+	model = "MediaTek MT6797 Evaluation Board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
new file mode 100644
index 0000000000..9534cf3a09
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for MediaTek X20 Development Board
+ *
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "mt6797.dtsi"
+
+/ {
+	model = "Mediatek X20 Development Board";
+	chassis-type = "embedded";
+	compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* HDMI */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+/* HS - I2C2 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+/* HS - I2C3 */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+};
+
+/* LS - I2C0 */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	status = "okay";
+};
+
+/* LS - I2C1 */
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	status = "okay";
+};
+
+/* POWER_VPROC */
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins_a>;
+	status = "okay";
+};
+
+/* FAN53555 */
+&i2c7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
new file mode 100644
index 0000000000..c3677d77e0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+#include <dt-bindings/clock/mt6797-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/mt6797-pinfunc.h>
+
+/ {
+	compatible = "mediatek,mt6797";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x001>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x002>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x003>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+		};
+
+		cpu8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x200>;
+		};
+
+		cpu9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x201>;
+		};
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	topckgen: topckgen@10000000 {
+		compatible = "mediatek,mt6797-topckgen";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infrasys: infracfg_ao@10001000 {
+		compatible = "mediatek,mt6797-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pio: pinctrl@10005000 {
+		compatible = "mediatek,mt6797-pinctrl";
+		reg = <0 0x10005000 0 0x1000>,
+		      <0 0x10002000 0 0x400>,
+		      <0 0x10002400 0 0x400>,
+		      <0 0x10002800 0 0x400>,
+		      <0 0x10002C00 0 0x400>;
+		reg-names = "gpio", "iocfgl", "iocfgb",
+			    "iocfgr", "iocfgt";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		uart0_pins_a: uart0 {
+			pins0 {
+				pinmux = <MT6797_GPIO234__FUNC_UTXD0>,
+					 <MT6797_GPIO235__FUNC_URXD0>;
+			};
+		};
+
+		uart1_pins_a: uart1 {
+			pins1 {
+				pinmux = <MT6797_GPIO232__FUNC_URXD1>,
+					 <MT6797_GPIO233__FUNC_UTXD1>;
+			};
+		};
+
+		i2c0_pins_a: i2c0 {
+			pins0 {
+				pinmux = <MT6797_GPIO37__FUNC_SCL0_0>,
+					 <MT6797_GPIO38__FUNC_SDA0_0>;
+			};
+		};
+
+		i2c1_pins_a: i2c1 {
+			pins1 {
+				pinmux = <MT6797_GPIO55__FUNC_SCL1_0>,
+					 <MT6797_GPIO56__FUNC_SDA1_0>;
+			};
+		};
+
+		i2c2_pins_a: i2c2 {
+			pins2 {
+				pinmux = <MT6797_GPIO96__FUNC_SCL2_0>,
+					 <MT6797_GPIO95__FUNC_SDA2_0>;
+			};
+		};
+
+		i2c3_pins_a: i2c3 {
+			pins3 {
+				pinmux = <MT6797_GPIO75__FUNC_SDA3_0>,
+					 <MT6797_GPIO74__FUNC_SCL3_0>;
+			};
+		};
+
+		i2c4_pins_a: i2c4 {
+			pins4 {
+				pinmux = <MT6797_GPIO238__FUNC_SDA4_0>,
+					 <MT6797_GPIO239__FUNC_SCL4_0>;
+			};
+		};
+
+		i2c5_pins_a: i2c5 {
+			pins5 {
+				pinmux = <MT6797_GPIO240__FUNC_SDA5_0>,
+					 <MT6797_GPIO241__FUNC_SCL5_0>;
+			};
+		};
+
+		i2c6_pins_a: i2c6 {
+			pins6 {
+				pinmux = <MT6797_GPIO152__FUNC_SDA6_0>,
+					 <MT6797_GPIO151__FUNC_SCL6_0>;
+			};
+		};
+
+		i2c7_pins_a: i2c7 {
+			pins7 {
+				pinmux = <MT6797_GPIO154__FUNC_SDA7_0>,
+					 <MT6797_GPIO153__FUNC_SCL7_0>;
+			};
+		};
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt6797-scpsys";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		clocks = <&topckgen CLK_TOP_MUX_MFG>,
+			 <&topckgen CLK_TOP_MUX_MM>,
+			 <&topckgen CLK_TOP_MUX_VDEC>;
+		clock-names = "mfg", "mm", "vdec";
+		infracfg = <&infrasys>;
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt6797-wdt", "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	apmixedsys: apmixed@1000c000 {
+		compatible = "mediatek,mt6797-apmixedsys";
+		reg = <0 0x1000c000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	sysirq: intpol-controller@10200620 {
+		compatible = "mediatek,mt6797-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10220620 0 0x20>,
+		      <0 0x10220690 0 0x10>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6797-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_UART0>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6797-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_UART1>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt6797-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_UART2>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt6797-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_UART3>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <0>;
+		reg = <0 0x11007000 0 0x1000>,
+		      <0 0x11000100 0 0x80>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C0>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <1>;
+		reg = <0 0x11008000 0 0x1000>,
+		      <0 0x11000180 0 0x80>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C1>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@11009000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <8>;
+		reg = <0 0x11009000 0 0x1000>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C2>,
+			 <&infrasys CLK_INFRA_AP_DMA>,
+			 <&infrasys CLK_INFRA_I2C2_ARB>;
+		clock-names = "main", "dma", "arb";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c9: i2c@1100d000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <9>;
+		reg = <0 0x1100d000 0 0x1000>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C3>,
+			 <&infrasys CLK_INFRA_AP_DMA>,
+			 <&infrasys CLK_INFRA_I2C3_ARB>;
+		clock-names = "main", "dma", "arb";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@1100e000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <6>;
+		reg = <0 0x1100e000 0 0x1000>,
+		      <0 0x11000500 0 0x80>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C_APPM>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@11010000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <7>;
+		reg = <0 0x11010000 0 0x1000>,
+		      <0 0x11000580 0 0x80>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C_GPUPM>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@11011000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <4>;
+		reg = <0 0x11011000 0 0x1000>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C4>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11013000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <2>;
+		reg = <0 0x11013000 0 0x1000>,
+		      <0 0x11000400 0 0x80>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C2_IMM>,
+			 <&infrasys CLK_INFRA_AP_DMA>,
+			 <&infrasys CLK_INFRA_I2C2_ARB>;
+		clock-names = "main", "dma", "arb";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@11014000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <3>;
+		reg = <0 0x11014000 0 0x1000>,
+		      <0 0x11000480 0 0x80>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C3_IMM>,
+			 <&infrasys CLK_INFRA_AP_DMA>,
+			 <&infrasys CLK_INFRA_I2C3_ARB>;
+		clock-names = "main", "dma", "arb";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@1101c000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <5>;
+		reg = <0 0x1101c000 0 0x1000>,
+		      <0 0x11000380 0 0x80>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C5>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt6797-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	imgsys: imgsys_config@15000000  {
+		compatible = "mediatek,mt6797-imgsys", "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	vdecsys: vdec_gcon@16000000 {
+		compatible = "mediatek,mt6797-vdecsys", "syscon";
+		reg = <0 0x16000000 0 0x10000>;
+		#clock-cells = <1>;
+	};
+
+	vencsys: venc_gcon@17000000 {
+		compatible = "mediatek,mt6797-vencsys", "syscon";
+		reg = <0 0x17000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@19000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		reg = <0 0x19000000 0 0x10000>,    /* GICD */
+		      <0 0x19200000 0 0x200000>,   /* GICR */
+		      <0 0x10240000 0 0x2000>;     /* GICC */
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
new file mode 100644
index 0000000000..94e1cc9fbe
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -0,0 +1,635 @@
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+	model = "Bananapi BPI-R64";
+	chassis-type = "embedded";
+	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		factory-key {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps-key {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bpi-r64:pio:green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "bpi-r64:pio:red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&bch {
+	status = "disabled";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&irrx_pins>;
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <0>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&pio>;
+			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			reset-gpios = <&pio 54 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "wan";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan0";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan1";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan2";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan3";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sd0_pins_default>;
+	pinctrl-1 = <&sd0_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&parallel_nand_pins>;
+	status = "disabled";
+};
+
+&bch {
+	status = "okay";
+};
+
+&snfi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial_nand_pins>;
+	status = "okay";
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		nand-ecc-engine = <&snfi>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "fip";
+				reg = <0x80000 0x200000>;
+				read-only;
+			};
+
+			ubi: partition@280000 {
+				label = "ubi";
+				reg = <0x280000 0x7d80000>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins>;
+	status = "okay";
+};
+
+&pio {
+	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
+	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
+	 */
+	asm_sel {
+		gpio-hog;
+		gpios = <90 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	/* eMMC is shared pin with parallel NAND */
+	emmc_pins_default: emmc-pins-default {
+		mux {
+			function = "emmc", "emmc_rst";
+			groups = "emmc";
+		};
+
+		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+		 */
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			bias-pull-down;
+		};
+	};
+
+	emmc_pins_uhs: emmc-pins-uhs {
+		mux {
+			function = "emmc";
+			groups = "emmc";
+		};
+
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+	};
+
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "rgmii_via_gmac2";
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_0";
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_0";
+		};
+	};
+
+	i2s1_pins: i2s1-pins {
+		mux {
+			function = "i2s";
+			groups =  "i2s_out_mclk_bclk_ws",
+				  "i2s1_in_data",
+				  "i2s1_out_data";
+		};
+
+		conf {
+			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
+			       "I2S_WS", "I2S_MCLK";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+	};
+
+	irrx_pins: irrx-pins {
+		mux {
+			function = "ir";
+			groups = "ir_1_rx";
+		};
+	};
+
+	irtx_pins: irtx-pins {
+		mux {
+			function = "ir";
+			groups = "ir_1_tx";
+		};
+	};
+
+	/* Parallel nand is shared pin with eMMC */
+	parallel_nand_pins: parallel-nand-pins {
+		mux {
+			function = "flash";
+			groups = "par_nand";
+		};
+	};
+
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pcie1_pins: pcie1-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie1_pad_perst",
+				 "pcie1_0_waken",
+				 "pcie1_0_clkreq";
+		};
+	};
+
+	pmic_bus_pins: pmic-bus-pins {
+		mux {
+			function = "pmic";
+			groups = "pmic_bus";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm_ch1_0", /* mt7622_pwm_ch1_0_pins[] = { 51, }; */
+				 "pwm_ch2_0", /* mt7622_pwm_ch2_0_pins[] = { 52, }; */
+				 "pwm_ch3_2", /* mt7622_pwm_ch3_2_pins[] = { 97, }; */
+				 "pwm_ch4_1", /* mt7622_pwm_ch4_1_pins[] = { 67, }; */
+				 "pwm_ch5_0", /* mt7622_pwm_ch5_0_pins[] = { 68, }; */
+				 "pwm_ch6_0"; /* mt7622_pwm_ch6_0_pins[] = { 69, }; */
+		};
+	};
+
+	wled_pins: wled-pins {
+		mux {
+			function = "led";
+			groups = "wled";
+		};
+	};
+
+	sd0_pins_default: sd0-pins-default {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+		 *  DAT2, DAT3, CMD, CLK for SD respectively.
+		 */
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		conf-clk {
+			pins = "I2S3_OUT";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+		conf-cd {
+			pins = "TXD3";
+			bias-pull-up;
+		};
+	};
+
+	sd0_pins_uhs: sd0-pins-uhs {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "I2S3_OUT";
+			bias-pull-down;
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spic0_pins: spic0-pins {
+		mux {
+			function = "spi";
+			groups = "spic0_0";
+		};
+	};
+
+	spic1_pins: spic1-pins {
+		mux {
+			function = "spi";
+			groups = "spic1_0";
+		};
+	};
+
+	/* SPI-NOR is shared pin with serial NAND */
+	spi_nor_pins: spi-nor-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	/* serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx" ;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_1_tx_rx" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&pwrap {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_bus_pins>;
+
+	status = "okay";
+};
+
+&sata {
+	status = "disabled";
+};
+
+&sata_phy {
+	status = "disabled";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic1_pins>;
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
new file mode 100644
index 0000000000..c435984ca7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -0,0 +1,570 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ming Huang <ming.huang@mediatek.com>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+	model = "MediaTek MT7622 RFB1 board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 0 0>;
+		};
+
+		key-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 102 0>;
+		};
+	};
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&bch {
+	status = "disabled";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&irrx_pins>;
+	status = "okay";
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <0>;
+			reset-gpios = <&pio 54 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sd0_pins_default>;
+	pinctrl-1 = <&sd0_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&parallel_nand_pins>;
+	status = "disabled";
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_nor_pins>;
+	status = "disabled";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>;
+	status = "okay";
+};
+
+&pio {
+	/* eMMC is shared pin with parallel NAND */
+	emmc_pins_default: emmc-pins-default {
+		mux {
+			function = "emmc", "emmc_rst";
+			groups = "emmc";
+		};
+
+		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+		 */
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			bias-pull-down;
+		};
+	};
+
+	emmc_pins_uhs: emmc-pins-uhs {
+		mux {
+			function = "emmc";
+			groups = "emmc";
+		};
+
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+	};
+
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "rgmii_via_gmac2";
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_0";
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_0";
+		};
+	};
+
+	i2s1_pins: i2s1-pins {
+		mux {
+			function = "i2s";
+			groups =  "i2s_out_mclk_bclk_ws",
+				  "i2s1_in_data",
+				  "i2s1_out_data";
+		};
+
+		conf {
+			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
+			       "I2S_WS", "I2S_MCLK";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+	};
+
+	irrx_pins: irrx-pins {
+		mux {
+			function = "ir";
+			groups = "ir_1_rx";
+		};
+	};
+
+	irtx_pins: irtx-pins {
+		mux {
+			function = "ir";
+			groups = "ir_1_tx";
+		};
+	};
+
+	/* Parallel nand is shared pin with eMMC */
+	parallel_nand_pins: parallel-nand-pins {
+		mux {
+			function = "flash";
+			groups = "par_nand";
+		};
+	};
+
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pcie1_pins: pcie1-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie1_pad_perst",
+				 "pcie1_0_waken",
+				 "pcie1_0_clkreq";
+		};
+	};
+
+	pmic_bus_pins: pmic-bus-pins {
+		mux {
+			function = "pmic";
+			groups = "pmic_bus";
+		};
+	};
+
+	pwm7_pins: pwm1-2-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm_ch7_2";
+		};
+	};
+
+	wled_pins: wled-pins {
+		mux {
+			function = "led";
+			groups = "wled";
+		};
+	};
+
+	sd0_pins_default: sd0-pins-default {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+		 *  DAT2, DAT3, CMD, CLK for SD respectively.
+		 */
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		conf-clk {
+			pins = "I2S3_OUT";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+		conf-cd {
+			pins = "TXD3";
+			bias-pull-up;
+		};
+	};
+
+	sd0_pins_uhs: sd0-pins-uhs {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "I2S3_OUT";
+			bias-pull-down;
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spic0_pins: spic0-pins {
+		mux {
+			function = "spi";
+			groups = "spic0_0";
+		};
+	};
+
+	spic1_pins: spic1-pins {
+		mux {
+			function = "spi";
+			groups = "spic1_0";
+		};
+	};
+
+	/* SPI-NOR is shared pin with serial NAND */
+	spi_nor_pins: spi-nor-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	/* serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx" ;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_1_tx_rx" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+
+	wmac_pins: wmac-pins {
+		mux {
+			function = "antsel";
+			groups = "antsel0", "antsel1", "antsel2", "antsel3",
+				 "antsel4", "antsel5", "antsel6", "antsel7",
+				 "antsel8", "antsel9", "antsel12", "antsel13",
+				 "antsel14", "antsel15", "antsel16", "antsel17";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm7_pins>;
+	status = "okay";
+};
+
+&pwrap {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_bus_pins>;
+
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic1_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
+
+&wmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wmac_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
new file mode 100644
index 0000000000..3ee9266fa8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -0,0 +1,1010 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ming Huang <ming.huang@mediatek.com>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt7622-power.h>
+#include <dt-bindings/reset/mt7622-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "mediatek,mt7622";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-300000000 {
+			opp-hz = /bits/ 64 <30000000>;
+			opp-microvolt = <950000>;
+		};
+
+		opp-437500000 {
+			opp-hz = /bits/ 64 <437500000>;
+			opp-microvolt = <1000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-812500000 {
+			opp-hz = /bits/ 64 <812500000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-1025000000 {
+			opp-hz = /bits/ 64 <1025000000>;
+			opp-microvolt = <1150000>;
+		};
+
+		opp-1137500000 {
+			opp-hz = /bits/ 64 <1137500000>;
+			opp-microvolt = <1200000>;
+		};
+
+		opp-1262500000 {
+			opp-hz = /bits/ 64 <1262500000>;
+			opp-microvolt = <1250000>;
+		};
+
+		opp-1350000000 {
+			opp-hz = /bits/ 64 <1350000000>;
+			opp-microvolt = <1310000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			clock-frequency = <1300000000>;
+			cci-control-port = <&cci_control2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			clock-frequency = <1300000000>;
+			cci-control-port = <&cci_control2>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	pwrap_clk: dummy40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+	};
+
+	clk25m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&thermal 0>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <47000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_active: cpu-active {
+					temperature = <67000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <87000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu-crit {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_active>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	infracfg: infracfg@10000000 {
+		compatible = "mediatek,mt7622-infracfg",
+			     "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrap: pwrap@10001000 {
+		compatible = "mediatek,mt7622-pwrap";
+		reg = <0 0x10001000 0 0x250>;
+		reg-names = "pwrap";
+		clocks = <&infracfg CLK_INFRA_PMIC_PD>, <&pwrap_clk>;
+		clock-names = "spi", "wrap";
+		resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>;
+		reset-names = "pwrap";
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pericfg: pericfg@10002000 {
+		compatible = "mediatek,mt7622-pericfg",
+			     "syscon";
+		reg = <0 0x10002000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt7622-scpsys",
+			     "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_HIF_SEL>;
+		clock-names = "hif_sel";
+	};
+
+	cir: cir@10009000 {
+		compatible = "mediatek,mt7622-cir";
+		reg = <0 0x10009000 0 0x1000>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_IRRX_PD>,
+			 <&topckgen CLK_TOP_AXI_SEL>;
+		clock-names = "clk", "bus";
+		status = "disabled";
+	};
+
+	sysirq: interrupt-controller@10200620 {
+		compatible = "mediatek,mt7622-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200620 0 0x20>;
+	};
+
+	efuse: efuse@10206000 {
+		compatible = "mediatek,mt7622-efuse",
+			     "mediatek,efuse";
+		reg = <0 0x10206000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		thermal_calibration: calib@198 {
+			reg = <0x198 0xc>;
+		};
+	};
+
+	apmixedsys: apmixedsys@10209000 {
+		compatible = "mediatek,mt7622-apmixedsys",
+			     "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	topckgen: topckgen@10210000 {
+		compatible = "mediatek,mt7622-topckgen",
+			     "syscon";
+		reg = <0 0x10210000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	rng: rng@1020f000 {
+		compatible = "mediatek,mt7622-rng",
+			     "mediatek,mt7623-rng";
+		reg = <0 0x1020f000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_TRNG>;
+		clock-names = "rng";
+	};
+
+	pio: pinctrl@10211000 {
+		compatible = "mediatek,mt7622-pinctrl";
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10005000 0 0x1000>;
+		reg-names = "base", "eint";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pio 0 0 103>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+	};
+
+	watchdog: watchdog@10212000 {
+		compatible = "mediatek,mt7622-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10212000 0 0x800>;
+	};
+
+	rtc: rtc@10212800 {
+		compatible = "mediatek,mt7622-rtc",
+			     "mediatek,soc-rtc";
+		reg = <0 0x10212800 0 0x200>;
+		interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_RTC>;
+		clock-names = "rtc";
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10310000 0 0x1000>,
+		      <0 0x10320000 0 0x1000>,
+		      <0 0x10340000 0 0x2000>,
+		      <0 0x10360000 0 0x2000>;
+	};
+
+	cci: cci@10390000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x10390000 0 0x1000>;
+		ranges = <0 0 0x10390000 0x10000>;
+
+		cci_control0: slave-if@1000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace-lite";
+			reg = <0x1000 0x1000>;
+		};
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if", "syscon";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+
+		pmu@9000 {
+			compatible = "arm,cci-400-pmu,r1";
+			reg = <0x9000 0x5000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt7622-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC_PD>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART0_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART1_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART2_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART3_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt7622-pwm";
+		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM_PD>,
+			 <&pericfg CLK_PERI_PWM1_PD>,
+			 <&pericfg CLK_PERI_PWM2_PD>,
+			 <&pericfg CLK_PERI_PWM3_PD>,
+			 <&pericfg CLK_PERI_PWM4_PD>,
+			 <&pericfg CLK_PERI_PWM5_PD>,
+			 <&pericfg CLK_PERI_PWM6_PD>;
+		clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
+			      "pwm5", "pwm6";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt7622-i2c";
+		reg = <0 0x11007000 0 0x90>,
+		      <0 0x11000100 0 0x80>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0_PD>,
+			 <&pericfg CLK_PERI_AP_DMA_PD>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt7622-i2c";
+		reg = <0 0x11008000 0 0x90>,
+		      <0 0x11000180 0 0x80>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1_PD>,
+			 <&pericfg CLK_PERI_AP_DMA_PD>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt7622-i2c";
+		reg = <0 0x11009000 0 0x90>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2_PD>,
+			 <&pericfg CLK_PERI_AP_DMA_PD>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt7622-spi";
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI0_SEL>,
+			 <&pericfg CLK_PERI_SPI0_PD>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <1>;
+		compatible = "mediatek,mt7622-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <0 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM_PD>,
+			 <&pericfg CLK_PERI_AUXADC_PD>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+		nvmem-cells = <&thermal_calibration>;
+		nvmem-cell-names = "calibration-data";
+	};
+
+	btif: serial@1100c000 {
+		compatible = "mediatek,mt7622-btif",
+			     "mediatek,mtk-btif";
+		reg = <0 0x1100c000 0 0x1000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_BTIF_PD>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+
+		bluetooth {
+			compatible = "mediatek,mt7622-bluetooth";
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+			clocks = <&clk25m>;
+			clock-names = "ref";
+		};
+	};
+
+	nandc: nand-controller@1100d000 {
+		compatible = "mediatek,mt7622-nfc";
+		reg = <0 0x1100D000 0 0x1000>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_PD>,
+			 <&pericfg CLK_PERI_SNFI_PD>;
+		clock-names = "nfi_clk", "pad_clk";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	snfi: spi@1100d000 {
+		compatible = "mediatek,mt7622-snand";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>;
+		clock-names = "nfi_clk", "pad_clk";
+		nand-ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt7622-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFIECC_PD>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	nor_flash: spi@11014000 {
+		compatible = "mediatek,mt7622-nor",
+			     "mediatek,mt8173-nor";
+		reg = <0 0x11014000 0 0xe0>;
+		clocks = <&pericfg CLK_PERI_FLASH_PD>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@11016000 {
+		compatible = "mediatek,mt7622-spi";
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI1_SEL>,
+			 <&pericfg CLK_PERI_SPI1_PD>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart4: serial@11019000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11019000 0 0x400>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART4_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	audsys: clock-controller@11220000 {
+		compatible = "mediatek,mt7622-audsys", "syscon";
+		reg = <0 0x11220000 0 0x2000>;
+		#clock-cells = <1>;
+
+		afe: audio-controller {
+			compatible = "mediatek,mt7622-audio";
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "afe", "asys";
+
+			clocks = <&infracfg CLK_INFRA_AUDIO_PD>,
+				 <&topckgen CLK_TOP_AUD1_SEL>,
+				 <&topckgen CLK_TOP_AUD2_SEL>,
+				 <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>,
+				 <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>,
+				 <&topckgen CLK_TOP_I2S0_MCK_SEL>,
+				 <&topckgen CLK_TOP_I2S1_MCK_SEL>,
+				 <&topckgen CLK_TOP_I2S2_MCK_SEL>,
+				 <&topckgen CLK_TOP_I2S3_MCK_SEL>,
+				 <&topckgen CLK_TOP_I2S0_MCK_DIV>,
+				 <&topckgen CLK_TOP_I2S1_MCK_DIV>,
+				 <&topckgen CLK_TOP_I2S2_MCK_DIV>,
+				 <&topckgen CLK_TOP_I2S3_MCK_DIV>,
+				 <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>,
+				 <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>,
+				 <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>,
+				 <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>,
+				 <&audsys CLK_AUDIO_I2SO1>,
+				 <&audsys CLK_AUDIO_I2SO2>,
+				 <&audsys CLK_AUDIO_I2SO3>,
+				 <&audsys CLK_AUDIO_I2SO4>,
+				 <&audsys CLK_AUDIO_I2SIN1>,
+				 <&audsys CLK_AUDIO_I2SIN2>,
+				 <&audsys CLK_AUDIO_I2SIN3>,
+				 <&audsys CLK_AUDIO_I2SIN4>,
+				 <&audsys CLK_AUDIO_ASRCO1>,
+				 <&audsys CLK_AUDIO_ASRCO2>,
+				 <&audsys CLK_AUDIO_ASRCO3>,
+				 <&audsys CLK_AUDIO_ASRCO4>,
+				 <&audsys CLK_AUDIO_AFE>,
+				 <&audsys CLK_AUDIO_AFE_CONN>,
+				 <&audsys CLK_AUDIO_A1SYS>,
+				 <&audsys CLK_AUDIO_A2SYS>;
+
+			clock-names = "infra_sys_audio_clk",
+				      "top_audio_mux1_sel",
+				      "top_audio_mux2_sel",
+				      "top_audio_a1sys_hp",
+				      "top_audio_a2sys_hp",
+				      "i2s0_src_sel",
+				      "i2s1_src_sel",
+				      "i2s2_src_sel",
+				      "i2s3_src_sel",
+				      "i2s0_src_div",
+				      "i2s1_src_div",
+				      "i2s2_src_div",
+				      "i2s3_src_div",
+				      "i2s0_mclk_en",
+				      "i2s1_mclk_en",
+				      "i2s2_mclk_en",
+				      "i2s3_mclk_en",
+				      "i2so0_hop_ck",
+				      "i2so1_hop_ck",
+				      "i2so2_hop_ck",
+				      "i2so3_hop_ck",
+				      "i2si0_hop_ck",
+				      "i2si1_hop_ck",
+				      "i2si2_hop_ck",
+				      "i2si3_hop_ck",
+				      "asrc0_out_ck",
+				      "asrc1_out_ck",
+				      "asrc2_out_ck",
+				      "asrc3_out_ck",
+				      "audio_afe_pd",
+				      "audio_afe_conn_pd",
+				      "audio_a1sys_pd",
+				      "audio_a2sys_pd";
+
+			assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>,
+					  <&topckgen CLK_TOP_A2SYS_HP_SEL>,
+					  <&topckgen CLK_TOP_A1SYS_HP_DIV>,
+					  <&topckgen CLK_TOP_A2SYS_HP_DIV>;
+			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>,
+						 <&topckgen CLK_TOP_AUD2PLL>;
+			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+		};
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt7622-mmc";
+		reg = <0 0x11230000 0 0x1000>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
+			 <&topckgen CLK_TOP_MSDC50_0_SEL>;
+		clock-names = "source", "hclk";
+		resets = <&pericfg MT7622_PERI_MSDC0_SW_RST>;
+		reset-names = "hrst";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt7622-mmc";
+		reg = <0 0x11240000 0 0x1000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
+			 <&topckgen CLK_TOP_AXI_SEL>;
+		clock-names = "source", "hclk";
+		resets = <&pericfg MT7622_PERI_MSDC1_SW_RST>;
+		reset-names = "hrst";
+		status = "disabled";
+	};
+
+	wmac: wmac@18000000 {
+		compatible = "mediatek,mt7622-wmac";
+		reg = <0 0x18000000 0 0x100000>;
+		interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+
+		mediatek,infracfg = <&infracfg>;
+		status = "disabled";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+	};
+
+	ssusbsys: ssusbsys@1a000000 {
+		compatible = "mediatek,mt7622-ssusbsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	ssusb: usb@1a0c0000 {
+		compatible = "mediatek,mt7622-xhci",
+			     "mediatek,mtk-xhci";
+		reg = <0 0x1a0c0000 0 0x01000>,
+		      <0 0x1a0c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+		clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+			 <&ssusbsys CLK_SSUSB_REF_EN>,
+			 <&ssusbsys CLK_SSUSB_MCU_EN>,
+			 <&ssusbsys CLK_SSUSB_DMA_EN>;
+		clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+		phys = <&u2port0 PHY_TYPE_USB2>,
+		       <&u3port0 PHY_TYPE_USB3>,
+		       <&u2port1 PHY_TYPE_USB2>;
+
+		status = "disabled";
+	};
+
+	u3phy: t-phy@1a0c4000 {
+		compatible = "mediatek,mt7622-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a0c4000 0 0x700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a0c4800 {
+			reg = <0 0x1a0c4800 0 0x0100>;
+			#phy-cells = <1>;
+			clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+			clock-names = "ref";
+		};
+
+		u3port0: usb-phy@1a0c4900 {
+			reg = <0 0x1a0c4900 0 0x0700>;
+			#phy-cells = <1>;
+			clocks = <&clk25m>;
+			clock-names = "ref";
+		};
+
+		u2port1: usb-phy@1a0c5000 {
+			reg = <0 0x1a0c5000 0 0x0100>;
+			#phy-cells = <1>;
+			clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
+			clock-names = "ref";
+		};
+	};
+
+	pciesys: pciesys@1a100800 {
+		compatible = "mediatek,mt7622-pciesys",
+			     "syscon";
+		reg = <0 0x1a100800 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pciecfg: pciecfg@1a140000 {
+		compatible = "mediatek,generic-pciecfg", "syscon";
+		reg = <0 0x1a140000 0 0x1000>;
+	};
+
+	pcie0: pcie@1a143000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a143000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P0_AUX_EN>,
+			 <&pciesys CLK_PCIE_P0_AXI_EN>,
+			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
+		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+			      "axi_ck0", "obff_ck0", "pipe_ck0";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1a145000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a145000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 /* designer has connect RC1 with p0_ahb clock */
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+			      "axi_ck1", "obff_ck1", "pipe_ck1";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	sata: sata@1a200000 {
+		compatible = "mediatek,mt7622-ahci",
+			     "mediatek,mtk-ahci";
+		reg = <0 0x1a200000 0 0x1100>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hostc";
+		clocks = <&pciesys CLK_SATA_AHB_EN>,
+			 <&pciesys CLK_SATA_AXI_EN>,
+			 <&pciesys CLK_SATA_ASIC_EN>,
+			 <&pciesys CLK_SATA_RBC_EN>,
+			 <&pciesys CLK_SATA_PM_EN>;
+		clock-names = "ahb", "axi", "asic", "rbc", "pm";
+		phys = <&sata_port PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+			 <&pciesys MT7622_SATA_PHY_SW_RST>,
+			 <&pciesys MT7622_SATA_PHY_REG_RST>;
+		reset-names = "axi", "sw", "reg";
+		mediatek,phy-mode = <&pciesys>;
+		status = "disabled";
+	};
+
+	sata_phy: t-phy {
+		compatible = "mediatek,mt7622-tphy",
+			     "mediatek,generic-tphy-v1";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		sata_port: sata-phy@1a243000 {
+			reg = <0 0x1a243000 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_ETH_500M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+		};
+	};
+
+	hifsys: syscon@1af00000 {
+		compatible = "mediatek,mt7622-hifsys", "syscon";
+		reg = <0 0x1af00000 0 0x70>;
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt7622-ethsys",
+			     "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	hsdma: dma-controller@1b007000 {
+		compatible = "mediatek,mt7622-hsdma";
+		reg = <0 0x1b007000 0 0x1000>;
+		interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETH_HSDMA_EN>;
+		clock-names = "hsdma";
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+		#dma-cells = <1>;
+		dma-requests = <3>;
+	};
+
+	pcie_mirror: pcie-mirror@10000400 {
+		compatible = "mediatek,mt7622-pcie-mirror",
+			     "syscon";
+		reg = <0 0x10000400 0 0x10>;
+	};
+
+	wed0: wed@1020a000 {
+		compatible = "mediatek,mt7622-wed",
+			     "syscon";
+		reg = <0 0x1020a000 0 0x1000>;
+		interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	wed1: wed@1020b000 {
+		compatible = "mediatek,mt7622-wed",
+			     "syscon";
+		reg = <0 0x1020b000 0 0x1000>;
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt7622-eth",
+			     "mediatek,mt2701-eth",
+			     "syscon";
+		reg = <0 0x1b100000 0 0x20000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETH_SEL>,
+			 <&ethsys CLK_ETH_ESW_EN>,
+			 <&ethsys CLK_ETH_GP0_EN>,
+			 <&ethsys CLK_ETH_GP1_EN>,
+			 <&ethsys CLK_ETH_GP2_EN>,
+			 <&sgmiisys CLK_SGMII_TX250M_EN>,
+			 <&sgmiisys CLK_SGMII_RX250M_EN>,
+			 <&sgmiisys CLK_SGMII_CDR_REF>,
+			 <&sgmiisys CLK_SGMII_CDR_FB>,
+			 <&topckgen CLK_TOP_SGMIIPLL>,
+			 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+		clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+			      "sgmii_tx250m", "sgmii_rx250m",
+			      "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+			      "eth2pll";
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+		mediatek,ethsys = <&ethsys>;
+		mediatek,sgmiisys = <&sgmiisys>;
+		cci-control-port = <&cci_control2>;
+		mediatek,wed = <&wed0>, <&wed1>;
+		mediatek,pcie-mirror = <&pcie_mirror>;
+		mediatek,hifsys = <&hifsys>;
+		dma-coherent;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sgmiisys: sgmiisys@1b128000 {
+		compatible = "mediatek,mt7622-sgmiisys",
+			     "syscon";
+		reg = <0 0x1b128000 0 0x3000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
new file mode 100644
index 0000000000..779dc6782b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/mmc@11230000";
+		__overlay__ {
+			bus-width = <8>;
+			max-frequency = <200000000>;
+			cap-mmc-highspeed;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			hs400-ds-delay = <0x14014>;
+			non-removable;
+			no-sd;
+			no-sdio;
+			status = "okay";
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
new file mode 100644
index 0000000000..543c13385d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Authors: Daniel Golle <daniel@makrotopia.org>
+ *          Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/spi@1100a000";
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			spi_nand: spi_nand@0 {
+				compatible = "spi-nand";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+				spi-tx-buswidth = <4>;
+				spi-rx-buswidth = <4>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "bl2";
+						reg = <0x0 0x100000>;
+						read-only;
+					};
+
+					partition@100000 {
+						label = "reserved";
+						reg = <0x100000 0x280000>;
+					};
+
+					partition@380000 {
+						label = "fip";
+						reg = <0x380000 0x200000>;
+						read-only;
+					};
+
+					partition@580000 {
+						label = "ubi";
+						reg = <0x580000 0x7a80000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
new file mode 100644
index 0000000000..e48881be4e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Authors: Daniel Golle <daniel@makrotopia.org>
+ *          Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/spi@1100a000";
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "bl2";
+						reg = <0x0 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "u-boot-env";
+						reg = <0x40000 0x40000>;
+					};
+
+					partition@80000 {
+						label = "reserved2";
+						reg = <0x80000 0x80000>;
+					};
+
+					partition@100000 {
+						label = "fip";
+						reg = <0x100000 0x80000>;
+						read-only;
+					};
+
+					partition@180000 {
+						label = "recovery";
+						reg = <0x180000 0xa80000>;
+					};
+
+					partition@c00000 {
+						label = "fit";
+						reg = <0xc00000 0x1400000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
new file mode 100644
index 0000000000..f623bce075
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/mmc@11230000";
+		__overlay__ {
+			bus-width = <4>;
+			max-frequency = <52000000>;
+			cap-sd-highspeed;
+			status = "okay";
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
new file mode 100644
index 0000000000..b876e50121
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Authors: Sam.Shih <sam.shih@mediatek.com>
+ *          Frank Wunderlich <frank-w@public-files.de>
+ *          Daniel Golle <daniel@makrotopia.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "Bananapi BPI-R3";
+	chassis-type = "embedded";
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dcin: regulator-12vd {
+		compatible = "regulator-fixed";
+		regulator-name = "12vd";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		/* cooling level (0, 1, 2) - pwm inverted */
+		cooling-levels = <255 96 0>;
+		pwms = <&pwm 0 10000 0>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset-key {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps-key {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* i2c of the left SFP cage (wan) */
+	i2c_sfp1: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/* i2c of the right SFP cage (lan) */
+	i2c_sfp2: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		blue_led: led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 86 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1.8vd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3vd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	/* left SFP cage (wan) */
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+		mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* right SFP cage (lan) */
+	sfp2: sfp-2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <3000>;
+		tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cpu-active-high {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		cpu-active-med {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		cpu-active-low {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 0 0>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		sfp = <&sfp1>;
+		managed = "in-band-status";
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	switch: switch@31 {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pio {
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c";
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_pereset";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm0", "pwm1_0";
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_0";
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1_rx_tx";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_0_rx_tx";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_led_pins: wf-led-pins {
+		mux {
+			function = "led";
+			groups = "wifi_led";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan0";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan1";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan2";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan3";
+		};
+
+		port5: port@5 {
+			reg = <5>;
+			label = "lan4";
+			phy-mode = "2500base-x";
+			sfp = <&sfp2>;
+			managed = "in-band-status";
+		};
+
+		port@6 {
+			reg = <6>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
+
+	led {
+		led-active-low;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
new file mode 100644
index 0000000000..3ef371ca25
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	switch: switch@0 {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		reset-gpios = <&pio 5 0>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x14014>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pio {
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan0";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan1";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan3";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan4";
+		};
+
+		port@6 {
+			reg = <6>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
new file mode 100644
index 0000000000..fc751e0499
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -0,0 +1,649 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+#include <dt-bindings/reset/mt7986-resets.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	compatible = "mediatek,mt7986a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+
+		wmcpu_emi: wmcpu-reserved@4fc00000 {
+			no-map;
+			reg = <0 0x4fc00000 0 0x00100000>;
+		};
+
+		wo_emi0: wo-emi@4fd00000 {
+			reg = <0 0x4fd00000 0 0x40000>;
+			no-map;
+		};
+
+		wo_emi1: wo-emi@4fd40000 {
+			reg = <0 0x4fd40000 0 0x40000>;
+			no-map;
+		};
+
+		wo_ilm0: wo-ilm@151e0000 {
+			reg = <0 0x151e0000 0 0x8000>;
+			no-map;
+		};
+
+		wo_ilm1: wo-ilm@151f0000 {
+			reg = <0 0x151f0000 0 0x8000>;
+			no-map;
+		};
+
+		wo_data: wo-data@4fd80000 {
+			reg = <0 0x4fd80000 0 0x240000>;
+			no-map;
+		};
+
+		wo_dlm0: wo-dlm@151e8000 {
+			reg = <0 0x151e8000 0 0x2000>;
+			no-map;
+		};
+
+		wo_dlm1: wo-dlm@151f8000 {
+			reg = <0 0x151f8000 0 0x2000>;
+			no-map;
+		};
+
+		wo_boot: wo-boot@15194000 {
+			reg = <0 0x15194000 0 0x1000>;
+			no-map;
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
+			      <0 0x0c080000 0 0x80000>,  /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wed_pcie: wed-pcie@10003000 {
+			compatible = "mediatek,mt7986-wed-pcie",
+				     "syscon";
+			reg = <0 0x10003000 0 0x10>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986a-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+				    "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 100>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: rng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		crypto: crypto@10320000 {
+			compatible = "inside-secure,safexcel-eip97";
+			reg = <0 0x10320000 0 0x40000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3";
+			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
+			clock-names = "infra_eip97_ck";
+			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
+			status = "disabled";
+		};
+
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7986-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			#clock-cells = <1>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11008000 {
+			compatible = "mediatek,mt7986-i2c";
+			reg = <0 0x11008000 0 0x90>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <5>;
+			clocks = <&infracfg CLK_INFRA_I2C0_CK>,
+				 <&infracfg CLK_INFRA_AP_DMA_CK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x100>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0_CK>,
+				 <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
+		spi1: spi@1100b000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100b000 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_SPI1_CK>,
+				 <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
+		auxadc: adc@1100d000 {
+			compatible = "mediatek,mt7986-auxadc";
+			reg = <0 0x1100d000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11200000 {
+			compatible = "mediatek,mt7986-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
+				 <&infracfg CLK_INFRA_IUSB_CK>,
+				 <&infracfg CLK_INFRA_IUSB_133_CK>,
+				 <&infracfg CLK_INFRA_IUSB_66M_CK>,
+				 <&topckgen CLK_TOP_U2U3_XHCI_SEL>;
+			clock-names = "sys_ck",
+				      "ref_ck",
+				      "mcu_ck",
+				      "dma_ck",
+				      "xhci_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt7986-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11c20000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			assigned-clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+					  <&topckgen CLK_TOP_EMMC_250M_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_MPLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D5_D2>;
+			clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+				 <&infracfg CLK_INFRA_MSDC_HCK_CK>,
+				 <&infracfg CLK_INFRA_MSDC_CK>,
+				 <&infracfg CLK_INFRA_MSDC_133M_CK>,
+				 <&infracfg CLK_INFRA_MSDC_66M_CK>;
+			clock-names = "source", "hclk", "source_cg", "bus_clk",
+				      "sys_cg";
+			status = "disabled";
+		};
+
+		thermal: thermal@1100c800 {
+			#thermal-sensor-cells = <1>;
+			compatible = "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>,
+				 <&infracfg CLK_INFRA_ADC_FRC_CK>;
+			clock-names = "therm", "auxadc", "adc_32k";
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		pcie: pcie@11280000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0x00 0x11280000 0x00 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x82000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x10000000>;
+			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
+				 <&infracfg CLK_INFRA_IPCIE_CK>,
+				 <&infracfg CLK_INFRA_IPCIER_CK>,
+				 <&infracfg CLK_INFRA_IPCIEB_CK>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
+			status = "disabled";
+
+			phys = <&pcie_port PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			pcie_intc: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie_phy: t-phy {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			pcie_port: pcie-phy@11c00000 {
+				reg = <0 0x11c00000 0 0x20000>;
+				clocks = <&clk40m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		efuse: efuse@11d00000 {
+			compatible = "mediatek,mt7986-efuse", "mediatek,efuse";
+			reg = <0 0x11d00000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			thermal_calibration: calib@274 {
+				reg = <0x274 0xc>;
+			};
+		};
+
+		usb_phy: t-phy@11e10000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e10000 0x1700>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x900>;
+				clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u2port1: usb-phy@1000 {
+				reg = <0x1000 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+		wed0: wed@15010000 {
+			compatible = "mediatek,mt7986-wed",
+				     "syscon";
+			reg = <0 0x15010000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>,
+					<&wo_data>, <&wo_boot>;
+			memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+					      "wo-data", "wo-boot";
+			mediatek,wo-ccif = <&wo_ccif0>;
+		};
+
+		wed1: wed@15011000 {
+			compatible = "mediatek,mt7986-wed",
+				     "syscon";
+			reg = <0 0x15011000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>,
+					<&wo_data>, <&wo_boot>;
+			memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+					      "wo-data", "wo-boot";
+			mediatek,wo-ccif = <&wo_ccif1>;
+		};
+
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@151ad000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151ad000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		eth: ethernet@15100000 {
+			compatible = "mediatek,mt7986-eth";
+			reg = <0 0x15100000 0 0x80000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ethsys CLK_ETH_FE_EN>,
+				 <&ethsys CLK_ETH_GP2_EN>,
+				 <&ethsys CLK_ETH_GP1_EN>,
+				 <&ethsys CLK_ETH_WOCPU1_EN>,
+				 <&ethsys CLK_ETH_WOCPU0_EN>,
+				 <&sgmiisys0 CLK_SGMII0_TX250M_EN>,
+				 <&sgmiisys0 CLK_SGMII0_RX250M_EN>,
+				 <&sgmiisys0 CLK_SGMII0_CDR_REF>,
+				 <&sgmiisys0 CLK_SGMII0_CDR_FB>,
+				 <&sgmiisys1 CLK_SGMII1_TX250M_EN>,
+				 <&sgmiisys1 CLK_SGMII1_RX250M_EN>,
+				 <&sgmiisys1 CLK_SGMII1_CDR_REF>,
+				 <&sgmiisys1 CLK_SGMII1_CDR_FB>,
+				 <&topckgen CLK_TOP_NETSYS_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_500M_SEL>;
+			clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
+				      "sgmii_tx250m", "sgmii_rx250m",
+				      "sgmii_cdr_ref", "sgmii_cdr_fb",
+				      "sgmii2_tx250m", "sgmii2_rx250m",
+				      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+				      "netsys0", "netsys1";
+			assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+					  <&topckgen CLK_TOP_SGM_325M_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+			mediatek,wed-pcie = <&wed_pcie>;
+			mediatek,wed = <&wed0>, <&wed1>;
+			#reset-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		wifi: wifi@18000000 {
+			compatible = "mediatek,mt7986-wmac";
+			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
+			reset-names = "consys";
+			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
+				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
+			clock-names = "mcu", "ap2conn";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wmcpu_emi>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal 0>;
+
+			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active_high: active-high {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_active_med: active-med {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_active_low: active-low {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
new file mode 100644
index 0000000000..dde190442e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+	model = "MediaTek MT7986b RFB";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <31>;
+			reset-gpios = <&pio 5 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan4";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&pio {
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
new file mode 100644
index 0000000000..db5189664c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include "mt7986a.dtsi"
+/ {
+	compatible = "mediatek,mt7986b";
+};
+
+&pio {
+	compatible = "mediatek,mt7986b-pinctrl";
+	gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8167-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8167-pinfunc.h
new file mode 100644
index 0000000000..061c3255a9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8167-pinfunc.h
@@ -0,0 +1,744 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ */
+#ifndef __DTS_MT8167_PINFUNC_H
+#define __DTS_MT8167_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8167_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8167_PIN_0_EINT0__FUNC_PWM_B (MTK_PIN_NO(0) | 1)
+#define MT8167_PIN_0_EINT0__FUNC_DPI_CK (MTK_PIN_NO(0) | 2)
+#define MT8167_PIN_0_EINT0__FUNC_I2S2_BCK (MTK_PIN_NO(0) | 3)
+#define MT8167_PIN_0_EINT0__FUNC_EXT_TXD0 (MTK_PIN_NO(0) | 4)
+#define MT8167_PIN_0_EINT0__FUNC_SQICS (MTK_PIN_NO(0) | 6)
+#define MT8167_PIN_0_EINT0__FUNC_DBG_MON_A_6 (MTK_PIN_NO(0) | 7)
+
+#define MT8167_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8167_PIN_1_EINT1__FUNC_PWM_C (MTK_PIN_NO(1) | 1)
+#define MT8167_PIN_1_EINT1__FUNC_DPI_D12 (MTK_PIN_NO(1) | 2)
+#define MT8167_PIN_1_EINT1__FUNC_I2S2_DI (MTK_PIN_NO(1) | 3)
+#define MT8167_PIN_1_EINT1__FUNC_EXT_TXD1 (MTK_PIN_NO(1) | 4)
+#define MT8167_PIN_1_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(1) | 5)
+#define MT8167_PIN_1_EINT1__FUNC_SQISO (MTK_PIN_NO(1) | 6)
+#define MT8167_PIN_1_EINT1__FUNC_DBG_MON_A_7 (MTK_PIN_NO(1) | 7)
+
+#define MT8167_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8167_PIN_2_EINT2__FUNC_CLKM0 (MTK_PIN_NO(2) | 1)
+#define MT8167_PIN_2_EINT2__FUNC_DPI_D13 (MTK_PIN_NO(2) | 2)
+#define MT8167_PIN_2_EINT2__FUNC_I2S2_LRCK (MTK_PIN_NO(2) | 3)
+#define MT8167_PIN_2_EINT2__FUNC_EXT_TXD2 (MTK_PIN_NO(2) | 4)
+#define MT8167_PIN_2_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(2) | 5)
+#define MT8167_PIN_2_EINT2__FUNC_SQISI (MTK_PIN_NO(2) | 6)
+#define MT8167_PIN_2_EINT2__FUNC_DBG_MON_A_8 (MTK_PIN_NO(2) | 7)
+
+#define MT8167_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8167_PIN_3_EINT3__FUNC_CLKM1 (MTK_PIN_NO(3) | 1)
+#define MT8167_PIN_3_EINT3__FUNC_DPI_D14 (MTK_PIN_NO(3) | 2)
+#define MT8167_PIN_3_EINT3__FUNC_SPI_MI (MTK_PIN_NO(3) | 3)
+#define MT8167_PIN_3_EINT3__FUNC_EXT_TXD3 (MTK_PIN_NO(3) | 4)
+#define MT8167_PIN_3_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(3) | 5)
+#define MT8167_PIN_3_EINT3__FUNC_SQIWP (MTK_PIN_NO(3) | 6)
+#define MT8167_PIN_3_EINT3__FUNC_DBG_MON_A_9 (MTK_PIN_NO(3) | 7)
+
+#define MT8167_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8167_PIN_4_EINT4__FUNC_CLKM2 (MTK_PIN_NO(4) | 1)
+#define MT8167_PIN_4_EINT4__FUNC_DPI_D15 (MTK_PIN_NO(4) | 2)
+#define MT8167_PIN_4_EINT4__FUNC_SPI_MO (MTK_PIN_NO(4) | 3)
+#define MT8167_PIN_4_EINT4__FUNC_EXT_TXC (MTK_PIN_NO(4) | 4)
+#define MT8167_PIN_4_EINT4__FUNC_CONN_MCU_TCK (MTK_PIN_NO(4) | 5)
+#define MT8167_PIN_4_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(4) | 6)
+#define MT8167_PIN_4_EINT4__FUNC_DBG_MON_A_10 (MTK_PIN_NO(4) | 7)
+
+#define MT8167_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8167_PIN_5_EINT5__FUNC_UCTS2 (MTK_PIN_NO(5) | 1)
+#define MT8167_PIN_5_EINT5__FUNC_DPI_D16 (MTK_PIN_NO(5) | 2)
+#define MT8167_PIN_5_EINT5__FUNC_SPI_CSB (MTK_PIN_NO(5) | 3)
+#define MT8167_PIN_5_EINT5__FUNC_EXT_RXER (MTK_PIN_NO(5) | 4)
+#define MT8167_PIN_5_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(5) | 5)
+#define MT8167_PIN_5_EINT5__FUNC_CONN_TEST_CK (MTK_PIN_NO(5) | 6)
+#define MT8167_PIN_5_EINT5__FUNC_DBG_MON_A_11 (MTK_PIN_NO(5) | 7)
+
+#define MT8167_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8167_PIN_6_EINT6__FUNC_URTS2 (MTK_PIN_NO(6) | 1)
+#define MT8167_PIN_6_EINT6__FUNC_DPI_D17 (MTK_PIN_NO(6) | 2)
+#define MT8167_PIN_6_EINT6__FUNC_SPI_CLK (MTK_PIN_NO(6) | 3)
+#define MT8167_PIN_6_EINT6__FUNC_EXT_RXC (MTK_PIN_NO(6) | 4)
+#define MT8167_PIN_6_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(6) | 5)
+#define MT8167_PIN_6_EINT6__FUNC_MM_TEST_CK (MTK_PIN_NO(6) | 6)
+#define MT8167_PIN_6_EINT6__FUNC_DBG_MON_A_12 (MTK_PIN_NO(6) | 7)
+
+#define MT8167_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8167_PIN_7_EINT7__FUNC_SQIRST (MTK_PIN_NO(7) | 1)
+#define MT8167_PIN_7_EINT7__FUNC_DPI_D6 (MTK_PIN_NO(7) | 2)
+#define MT8167_PIN_7_EINT7__FUNC_SDA1_0 (MTK_PIN_NO(7) | 3)
+#define MT8167_PIN_7_EINT7__FUNC_EXT_RXDV (MTK_PIN_NO(7) | 4)
+#define MT8167_PIN_7_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(7) | 5)
+#define MT8167_PIN_7_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(7) | 6)
+#define MT8167_PIN_7_EINT7__FUNC_DBG_MON_A_13 (MTK_PIN_NO(7) | 7)
+
+#define MT8167_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8167_PIN_8_EINT8__FUNC_SQICK (MTK_PIN_NO(8) | 1)
+#define MT8167_PIN_8_EINT8__FUNC_CLKM3 (MTK_PIN_NO(8) | 2)
+#define MT8167_PIN_8_EINT8__FUNC_SCL1_0 (MTK_PIN_NO(8) | 3)
+#define MT8167_PIN_8_EINT8__FUNC_EXT_RXD0 (MTK_PIN_NO(8) | 4)
+#define MT8167_PIN_8_EINT8__FUNC_ANT_SEL0 (MTK_PIN_NO(8) | 5)
+#define MT8167_PIN_8_EINT8__FUNC_DPI_D7 (MTK_PIN_NO(8) | 6)
+#define MT8167_PIN_8_EINT8__FUNC_DBG_MON_A_14 (MTK_PIN_NO(8) | 7)
+
+#define MT8167_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8167_PIN_9_EINT9__FUNC_CLKM4 (MTK_PIN_NO(9) | 1)
+#define MT8167_PIN_9_EINT9__FUNC_SDA2_0 (MTK_PIN_NO(9) | 2)
+#define MT8167_PIN_9_EINT9__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT8167_PIN_9_EINT9__FUNC_EXT_RXD1 (MTK_PIN_NO(9) | 4)
+#define MT8167_PIN_9_EINT9__FUNC_ANT_SEL1 (MTK_PIN_NO(9) | 5)
+#define MT8167_PIN_9_EINT9__FUNC_DPI_D8 (MTK_PIN_NO(9) | 6)
+#define MT8167_PIN_9_EINT9__FUNC_DBG_MON_A_15 (MTK_PIN_NO(9) | 7)
+
+#define MT8167_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8167_PIN_10_EINT10__FUNC_CLKM5 (MTK_PIN_NO(10) | 1)
+#define MT8167_PIN_10_EINT10__FUNC_SCL2_0 (MTK_PIN_NO(10) | 2)
+#define MT8167_PIN_10_EINT10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 3)
+#define MT8167_PIN_10_EINT10__FUNC_EXT_RXD2 (MTK_PIN_NO(10) | 4)
+#define MT8167_PIN_10_EINT10__FUNC_ANT_SEL2 (MTK_PIN_NO(10) | 5)
+#define MT8167_PIN_10_EINT10__FUNC_DPI_D9 (MTK_PIN_NO(10) | 6)
+#define MT8167_PIN_10_EINT10__FUNC_DBG_MON_A_16 (MTK_PIN_NO(10) | 7)
+
+#define MT8167_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8167_PIN_11_EINT11__FUNC_CLKM4 (MTK_PIN_NO(11) | 1)
+#define MT8167_PIN_11_EINT11__FUNC_PWM_C (MTK_PIN_NO(11) | 2)
+#define MT8167_PIN_11_EINT11__FUNC_CONN_TEST_CK (MTK_PIN_NO(11) | 3)
+#define MT8167_PIN_11_EINT11__FUNC_ANT_SEL3 (MTK_PIN_NO(11) | 4)
+#define MT8167_PIN_11_EINT11__FUNC_DPI_D10 (MTK_PIN_NO(11) | 5)
+#define MT8167_PIN_11_EINT11__FUNC_EXT_RXD3 (MTK_PIN_NO(11) | 6)
+#define MT8167_PIN_11_EINT11__FUNC_DBG_MON_A_17 (MTK_PIN_NO(11) | 7)
+
+#define MT8167_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8167_PIN_12_EINT12__FUNC_CLKM5 (MTK_PIN_NO(12) | 1)
+#define MT8167_PIN_12_EINT12__FUNC_PWM_A (MTK_PIN_NO(12) | 2)
+#define MT8167_PIN_12_EINT12__FUNC_SPDIF_OUT (MTK_PIN_NO(12) | 3)
+#define MT8167_PIN_12_EINT12__FUNC_ANT_SEL4 (MTK_PIN_NO(12) | 4)
+#define MT8167_PIN_12_EINT12__FUNC_DPI_D11 (MTK_PIN_NO(12) | 5)
+#define MT8167_PIN_12_EINT12__FUNC_EXT_TXEN (MTK_PIN_NO(12) | 6)
+#define MT8167_PIN_12_EINT12__FUNC_DBG_MON_A_18 (MTK_PIN_NO(12) | 7)
+
+#define MT8167_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8167_PIN_13_EINT13__FUNC_TSF_IN (MTK_PIN_NO(13) | 3)
+#define MT8167_PIN_13_EINT13__FUNC_ANT_SEL5 (MTK_PIN_NO(13) | 4)
+#define MT8167_PIN_13_EINT13__FUNC_DPI_D0 (MTK_PIN_NO(13) | 5)
+#define MT8167_PIN_13_EINT13__FUNC_SPDIF_IN (MTK_PIN_NO(13) | 6)
+#define MT8167_PIN_13_EINT13__FUNC_DBG_MON_A_19 (MTK_PIN_NO(13) | 7)
+
+#define MT8167_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8167_PIN_14_EINT14__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(14) | 2)
+#define MT8167_PIN_14_EINT14__FUNC_TDM_RX_MCK (MTK_PIN_NO(14) | 3)
+#define MT8167_PIN_14_EINT14__FUNC_ANT_SEL1 (MTK_PIN_NO(14) | 4)
+#define MT8167_PIN_14_EINT14__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(14) | 5)
+#define MT8167_PIN_14_EINT14__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8167_PIN_14_EINT14__FUNC_DBG_MON_B_8 (MTK_PIN_NO(14) | 7)
+
+#define MT8167_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8167_PIN_15_EINT15__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(15) | 2)
+#define MT8167_PIN_15_EINT15__FUNC_TDM_RX_BCK (MTK_PIN_NO(15) | 3)
+#define MT8167_PIN_15_EINT15__FUNC_ANT_SEL2 (MTK_PIN_NO(15) | 4)
+#define MT8167_PIN_15_EINT15__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(15) | 5)
+#define MT8167_PIN_15_EINT15__FUNC_NCEB1 (MTK_PIN_NO(15) | 6)
+#define MT8167_PIN_15_EINT15__FUNC_DBG_MON_B_9 (MTK_PIN_NO(15) | 7)
+
+#define MT8167_PIN_16_EINT16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8167_PIN_16_EINT16__FUNC_I2S_8CH_BCK (MTK_PIN_NO(16) | 2)
+#define MT8167_PIN_16_EINT16__FUNC_TDM_RX_LRCK (MTK_PIN_NO(16) | 3)
+#define MT8167_PIN_16_EINT16__FUNC_ANT_SEL3 (MTK_PIN_NO(16) | 4)
+#define MT8167_PIN_16_EINT16__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(16) | 5)
+#define MT8167_PIN_16_EINT16__FUNC_NCEB0 (MTK_PIN_NO(16) | 6)
+#define MT8167_PIN_16_EINT16__FUNC_DBG_MON_B_10 (MTK_PIN_NO(16) | 7)
+
+#define MT8167_PIN_17_EINT17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8167_PIN_17_EINT17__FUNC_I2S_8CH_MCK (MTK_PIN_NO(17) | 2)
+#define MT8167_PIN_17_EINT17__FUNC_TDM_RX_DI (MTK_PIN_NO(17) | 3)
+#define MT8167_PIN_17_EINT17__FUNC_IDDIG (MTK_PIN_NO(17) | 4)
+#define MT8167_PIN_17_EINT17__FUNC_ANT_SEL4 (MTK_PIN_NO(17) | 5)
+#define MT8167_PIN_17_EINT17__FUNC_NREB (MTK_PIN_NO(17) | 6)
+#define MT8167_PIN_17_EINT17__FUNC_DBG_MON_B_11 (MTK_PIN_NO(17) | 7)
+
+#define MT8167_PIN_18_EINT18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8167_PIN_18_EINT18__FUNC_USB_DRVVBUS (MTK_PIN_NO(18) | 2)
+#define MT8167_PIN_18_EINT18__FUNC_I2S3_LRCK (MTK_PIN_NO(18) | 3)
+#define MT8167_PIN_18_EINT18__FUNC_CLKM1 (MTK_PIN_NO(18) | 4)
+#define MT8167_PIN_18_EINT18__FUNC_ANT_SEL3 (MTK_PIN_NO(18) | 5)
+#define MT8167_PIN_18_EINT18__FUNC_I2S2_BCK (MTK_PIN_NO(18) | 6)
+#define MT8167_PIN_18_EINT18__FUNC_DBG_MON_A_20 (MTK_PIN_NO(18) | 7)
+
+#define MT8167_PIN_19_EINT19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8167_PIN_19_EINT19__FUNC_UCTS1 (MTK_PIN_NO(19) | 1)
+#define MT8167_PIN_19_EINT19__FUNC_IDDIG (MTK_PIN_NO(19) | 2)
+#define MT8167_PIN_19_EINT19__FUNC_I2S3_BCK (MTK_PIN_NO(19) | 3)
+#define MT8167_PIN_19_EINT19__FUNC_CLKM2 (MTK_PIN_NO(19) | 4)
+#define MT8167_PIN_19_EINT19__FUNC_ANT_SEL4 (MTK_PIN_NO(19) | 5)
+#define MT8167_PIN_19_EINT19__FUNC_I2S2_DI (MTK_PIN_NO(19) | 6)
+#define MT8167_PIN_19_EINT19__FUNC_DBG_MON_A_21 (MTK_PIN_NO(19) | 7)
+
+#define MT8167_PIN_20_EINT20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8167_PIN_20_EINT20__FUNC_URTS1 (MTK_PIN_NO(20) | 1)
+#define MT8167_PIN_20_EINT20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 3)
+#define MT8167_PIN_20_EINT20__FUNC_CLKM3 (MTK_PIN_NO(20) | 4)
+#define MT8167_PIN_20_EINT20__FUNC_ANT_SEL5 (MTK_PIN_NO(20) | 5)
+#define MT8167_PIN_20_EINT20__FUNC_I2S2_LRCK (MTK_PIN_NO(20) | 6)
+#define MT8167_PIN_20_EINT20__FUNC_DBG_MON_A_22 (MTK_PIN_NO(20) | 7)
+
+#define MT8167_PIN_21_EINT21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8167_PIN_21_EINT21__FUNC_NRNB (MTK_PIN_NO(21) | 1)
+#define MT8167_PIN_21_EINT21__FUNC_ANT_SEL0 (MTK_PIN_NO(21) | 2)
+#define MT8167_PIN_21_EINT21__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(21) | 3)
+#define MT8167_PIN_21_EINT21__FUNC_DBG_MON_B_31 (MTK_PIN_NO(21) | 7)
+
+#define MT8167_PIN_22_EINT22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8167_PIN_22_EINT22__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(22) | 2)
+#define MT8167_PIN_22_EINT22__FUNC_TSF_IN (MTK_PIN_NO(22) | 3)
+#define MT8167_PIN_22_EINT22__FUNC_USB_DRVVBUS (MTK_PIN_NO(22) | 4)
+#define MT8167_PIN_22_EINT22__FUNC_SPDIF_OUT (MTK_PIN_NO(22) | 5)
+#define MT8167_PIN_22_EINT22__FUNC_NRE_C (MTK_PIN_NO(22) | 6)
+#define MT8167_PIN_22_EINT22__FUNC_DBG_MON_B_12 (MTK_PIN_NO(22) | 7)
+
+#define MT8167_PIN_23_EINT23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8167_PIN_23_EINT23__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(23) | 2)
+#define MT8167_PIN_23_EINT23__FUNC_CLKM0 (MTK_PIN_NO(23) | 3)
+#define MT8167_PIN_23_EINT23__FUNC_IR (MTK_PIN_NO(23) | 4)
+#define MT8167_PIN_23_EINT23__FUNC_SPDIF_IN (MTK_PIN_NO(23) | 5)
+#define MT8167_PIN_23_EINT23__FUNC_NDQS_C (MTK_PIN_NO(23) | 6)
+#define MT8167_PIN_23_EINT23__FUNC_DBG_MON_B_13 (MTK_PIN_NO(23) | 7)
+
+#define MT8167_PIN_24_EINT24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8167_PIN_24_EINT24__FUNC_DPI_D20 (MTK_PIN_NO(24) | 1)
+#define MT8167_PIN_24_EINT24__FUNC_DPI_DE (MTK_PIN_NO(24) | 2)
+#define MT8167_PIN_24_EINT24__FUNC_ANT_SEL1 (MTK_PIN_NO(24) | 3)
+#define MT8167_PIN_24_EINT24__FUNC_UCTS2 (MTK_PIN_NO(24) | 4)
+#define MT8167_PIN_24_EINT24__FUNC_PWM_A (MTK_PIN_NO(24) | 5)
+#define MT8167_PIN_24_EINT24__FUNC_I2S0_MCK (MTK_PIN_NO(24) | 6)
+#define MT8167_PIN_24_EINT24__FUNC_DBG_MON_A_0 (MTK_PIN_NO(24) | 7)
+
+#define MT8167_PIN_25_EINT25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8167_PIN_25_EINT25__FUNC_DPI_D19 (MTK_PIN_NO(25) | 1)
+#define MT8167_PIN_25_EINT25__FUNC_DPI_VSYNC (MTK_PIN_NO(25) | 2)
+#define MT8167_PIN_25_EINT25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 3)
+#define MT8167_PIN_25_EINT25__FUNC_URTS2 (MTK_PIN_NO(25) | 4)
+#define MT8167_PIN_25_EINT25__FUNC_PWM_B (MTK_PIN_NO(25) | 5)
+#define MT8167_PIN_25_EINT25__FUNC_I2S_8CH_MCK (MTK_PIN_NO(25) | 6)
+#define MT8167_PIN_25_EINT25__FUNC_DBG_MON_A_1 (MTK_PIN_NO(25) | 7)
+
+#define MT8167_PIN_26_PWRAP_SPI0_MI__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8167_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(26) | 1)
+#define MT8167_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(26) | 2)
+
+#define MT8167_PIN_27_PWRAP_SPI0_MO__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8167_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(27) | 1)
+#define MT8167_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(27) | 2)
+
+#define MT8167_PIN_28_PWRAP_INT__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S0_MCK (MTK_PIN_NO(28) | 1)
+#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S_8CH_MCK (MTK_PIN_NO(28) | 4)
+#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S2_MCK (MTK_PIN_NO(28) | 5)
+#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S3_MCK (MTK_PIN_NO(28) | 6)
+
+#define MT8167_PIN_29_PWRAP_SPI0_CK__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8167_PIN_29_PWRAP_SPI0_CK__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(29) | 1)
+
+#define MT8167_PIN_30_PWRAP_SPI0_CSN__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8167_PIN_30_PWRAP_SPI0_CSN__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(30) | 1)
+
+#define MT8167_PIN_31_RTC32K_CK__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8167_PIN_31_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(31) | 1)
+
+#define MT8167_PIN_32_WATCHDOG__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8167_PIN_32_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(32) | 1)
+
+#define MT8167_PIN_33_SRCLKENA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8167_PIN_33_SRCLKENA__FUNC_SRCLKENA0 (MTK_PIN_NO(33) | 1)
+
+#define MT8167_PIN_34_URXD2__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8167_PIN_34_URXD2__FUNC_URXD2 (MTK_PIN_NO(34) | 1)
+#define MT8167_PIN_34_URXD2__FUNC_DPI_D5 (MTK_PIN_NO(34) | 2)
+#define MT8167_PIN_34_URXD2__FUNC_UTXD2 (MTK_PIN_NO(34) | 3)
+#define MT8167_PIN_34_URXD2__FUNC_DBG_SCL (MTK_PIN_NO(34) | 4)
+#define MT8167_PIN_34_URXD2__FUNC_I2S2_MCK (MTK_PIN_NO(34) | 6)
+#define MT8167_PIN_34_URXD2__FUNC_DBG_MON_B_0 (MTK_PIN_NO(34) | 7)
+
+#define MT8167_PIN_35_UTXD2__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8167_PIN_35_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(35) | 1)
+#define MT8167_PIN_35_UTXD2__FUNC_DPI_HSYNC (MTK_PIN_NO(35) | 2)
+#define MT8167_PIN_35_UTXD2__FUNC_URXD2 (MTK_PIN_NO(35) | 3)
+#define MT8167_PIN_35_UTXD2__FUNC_DBG_SDA (MTK_PIN_NO(35) | 4)
+#define MT8167_PIN_35_UTXD2__FUNC_DPI_D18 (MTK_PIN_NO(35) | 5)
+#define MT8167_PIN_35_UTXD2__FUNC_I2S3_MCK (MTK_PIN_NO(35) | 6)
+#define MT8167_PIN_35_UTXD2__FUNC_DBG_MON_B_1 (MTK_PIN_NO(35) | 7)
+
+#define MT8167_PIN_36_MRG_CLK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8167_PIN_36_MRG_CLK__FUNC_MRG_CLK (MTK_PIN_NO(36) | 1)
+#define MT8167_PIN_36_MRG_CLK__FUNC_DPI_D4 (MTK_PIN_NO(36) | 2)
+#define MT8167_PIN_36_MRG_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(36) | 3)
+#define MT8167_PIN_36_MRG_CLK__FUNC_I2S3_BCK (MTK_PIN_NO(36) | 4)
+#define MT8167_PIN_36_MRG_CLK__FUNC_PCM0_CLK (MTK_PIN_NO(36) | 5)
+#define MT8167_PIN_36_MRG_CLK__FUNC_IR (MTK_PIN_NO(36) | 6)
+#define MT8167_PIN_36_MRG_CLK__FUNC_DBG_MON_A_2 (MTK_PIN_NO(36) | 7)
+
+#define MT8167_PIN_37_MRG_SYNC__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(37) | 1)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_DPI_D3 (MTK_PIN_NO(37) | 2)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_I2S0_LRCK (MTK_PIN_NO(37) | 3)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_I2S3_LRCK (MTK_PIN_NO(37) | 4)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(37) | 5)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_EXT_COL (MTK_PIN_NO(37) | 6)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_DBG_MON_A_3 (MTK_PIN_NO(37) | 7)
+
+#define MT8167_PIN_38_MRG_DI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8167_PIN_38_MRG_DI__FUNC_MRG_DI (MTK_PIN_NO(38) | 1)
+#define MT8167_PIN_38_MRG_DI__FUNC_DPI_D1 (MTK_PIN_NO(38) | 2)
+#define MT8167_PIN_38_MRG_DI__FUNC_I2S0_DI (MTK_PIN_NO(38) | 3)
+#define MT8167_PIN_38_MRG_DI__FUNC_I2S3_DO (MTK_PIN_NO(38) | 4)
+#define MT8167_PIN_38_MRG_DI__FUNC_PCM0_DI (MTK_PIN_NO(38) | 5)
+#define MT8167_PIN_38_MRG_DI__FUNC_EXT_MDIO (MTK_PIN_NO(38) | 6)
+#define MT8167_PIN_38_MRG_DI__FUNC_DBG_MON_A_4 (MTK_PIN_NO(38) | 7)
+
+#define MT8167_PIN_39_MRG_DO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8167_PIN_39_MRG_DO__FUNC_MRG_DO (MTK_PIN_NO(39) | 1)
+#define MT8167_PIN_39_MRG_DO__FUNC_DPI_D2 (MTK_PIN_NO(39) | 2)
+#define MT8167_PIN_39_MRG_DO__FUNC_I2S0_MCK (MTK_PIN_NO(39) | 3)
+#define MT8167_PIN_39_MRG_DO__FUNC_I2S3_MCK (MTK_PIN_NO(39) | 4)
+#define MT8167_PIN_39_MRG_DO__FUNC_PCM0_DO (MTK_PIN_NO(39) | 5)
+#define MT8167_PIN_39_MRG_DO__FUNC_EXT_MDC (MTK_PIN_NO(39) | 6)
+#define MT8167_PIN_39_MRG_DO__FUNC_DBG_MON_A_5 (MTK_PIN_NO(39) | 7)
+
+#define MT8167_PIN_40_KPROW0__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8167_PIN_40_KPROW0__FUNC_KPROW0 (MTK_PIN_NO(40) | 1)
+#define MT8167_PIN_40_KPROW0__FUNC_IMG_TEST_CK (MTK_PIN_NO(40) | 4)
+#define MT8167_PIN_40_KPROW0__FUNC_DBG_MON_B_4 (MTK_PIN_NO(40) | 7)
+
+#define MT8167_PIN_41_KPROW1__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8167_PIN_41_KPROW1__FUNC_KPROW1 (MTK_PIN_NO(41) | 1)
+#define MT8167_PIN_41_KPROW1__FUNC_IDDIG (MTK_PIN_NO(41) | 2)
+#define MT8167_PIN_41_KPROW1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 3)
+#define MT8167_PIN_41_KPROW1__FUNC_MFG_TEST_CK (MTK_PIN_NO(41) | 4)
+#define MT8167_PIN_41_KPROW1__FUNC_DBG_MON_B_5 (MTK_PIN_NO(41) | 7)
+
+#define MT8167_PIN_42_KPCOL0__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8167_PIN_42_KPCOL0__FUNC_KPCOL0 (MTK_PIN_NO(42) | 1)
+#define MT8167_PIN_42_KPCOL0__FUNC_DBG_MON_B_6 (MTK_PIN_NO(42) | 7)
+
+#define MT8167_PIN_43_KPCOL1__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8167_PIN_43_KPCOL1__FUNC_KPCOL1 (MTK_PIN_NO(43) | 1)
+#define MT8167_PIN_43_KPCOL1__FUNC_USB_DRVVBUS (MTK_PIN_NO(43) | 2)
+#define MT8167_PIN_43_KPCOL1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(43) | 3)
+#define MT8167_PIN_43_KPCOL1__FUNC_TSF_IN (MTK_PIN_NO(43) | 4)
+#define MT8167_PIN_43_KPCOL1__FUNC_DFD_NTRST_XI (MTK_PIN_NO(43) | 5)
+#define MT8167_PIN_43_KPCOL1__FUNC_UDI_NTRST_XI (MTK_PIN_NO(43) | 6)
+#define MT8167_PIN_43_KPCOL1__FUNC_DBG_MON_B_7 (MTK_PIN_NO(43) | 7)
+
+#define MT8167_PIN_44_JTMS__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8167_PIN_44_JTMS__FUNC_JTMS (MTK_PIN_NO(44) | 1)
+#define MT8167_PIN_44_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(44) | 2)
+#define MT8167_PIN_44_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(44) | 3)
+#define MT8167_PIN_44_JTMS__FUNC_GPUDFD_TMS_XI (MTK_PIN_NO(44) | 4)
+#define MT8167_PIN_44_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(44) | 5)
+#define MT8167_PIN_44_JTMS__FUNC_UDI_TMS_XI (MTK_PIN_NO(44) | 6)
+
+#define MT8167_PIN_45_JTCK__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8167_PIN_45_JTCK__FUNC_JTCK (MTK_PIN_NO(45) | 1)
+#define MT8167_PIN_45_JTCK__FUNC_CONN_MCU_TCK (MTK_PIN_NO(45) | 2)
+#define MT8167_PIN_45_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(45) | 3)
+#define MT8167_PIN_45_JTCK__FUNC_GPUDFD_TCK_XI (MTK_PIN_NO(45) | 4)
+#define MT8167_PIN_45_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(45) | 5)
+#define MT8167_PIN_45_JTCK__FUNC_UDI_TCK_XI (MTK_PIN_NO(45) | 6)
+
+#define MT8167_PIN_46_JTDI__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8167_PIN_46_JTDI__FUNC_JTDI (MTK_PIN_NO(46) | 1)
+#define MT8167_PIN_46_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(46) | 2)
+#define MT8167_PIN_46_JTDI__FUNC_GPUDFD_TDI_XI (MTK_PIN_NO(46) | 4)
+#define MT8167_PIN_46_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(46) | 5)
+#define MT8167_PIN_46_JTDI__FUNC_UDI_TDI_XI (MTK_PIN_NO(46) | 6)
+
+#define MT8167_PIN_47_JTDO__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8167_PIN_47_JTDO__FUNC_JTDO (MTK_PIN_NO(47) | 1)
+#define MT8167_PIN_47_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(47) | 2)
+#define MT8167_PIN_47_JTDO__FUNC_GPUDFD_TDO (MTK_PIN_NO(47) | 4)
+#define MT8167_PIN_47_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(47) | 5)
+#define MT8167_PIN_47_JTDO__FUNC_UDI_TDO (MTK_PIN_NO(47) | 6)
+
+#define MT8167_PIN_48_SPI_CS__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8167_PIN_48_SPI_CS__FUNC_SPI_CSB (MTK_PIN_NO(48) | 1)
+#define MT8167_PIN_48_SPI_CS__FUNC_I2S0_DI (MTK_PIN_NO(48) | 3)
+#define MT8167_PIN_48_SPI_CS__FUNC_I2S2_BCK (MTK_PIN_NO(48) | 4)
+#define MT8167_PIN_48_SPI_CS__FUNC_DBG_MON_A_23 (MTK_PIN_NO(48) | 7)
+
+#define MT8167_PIN_49_SPI_CK__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8167_PIN_49_SPI_CK__FUNC_SPI_CLK (MTK_PIN_NO(49) | 1)
+#define MT8167_PIN_49_SPI_CK__FUNC_I2S0_LRCK (MTK_PIN_NO(49) | 3)
+#define MT8167_PIN_49_SPI_CK__FUNC_I2S2_DI (MTK_PIN_NO(49) | 4)
+#define MT8167_PIN_49_SPI_CK__FUNC_DBG_MON_A_24 (MTK_PIN_NO(49) | 7)
+
+#define MT8167_PIN_50_SPI_MI__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8167_PIN_50_SPI_MI__FUNC_SPI_MI (MTK_PIN_NO(50) | 1)
+#define MT8167_PIN_50_SPI_MI__FUNC_SPI_MO (MTK_PIN_NO(50) | 2)
+#define MT8167_PIN_50_SPI_MI__FUNC_I2S0_BCK (MTK_PIN_NO(50) | 3)
+#define MT8167_PIN_50_SPI_MI__FUNC_I2S2_LRCK (MTK_PIN_NO(50) | 4)
+#define MT8167_PIN_50_SPI_MI__FUNC_DBG_MON_A_25 (MTK_PIN_NO(50) | 7)
+
+#define MT8167_PIN_51_SPI_MO__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8167_PIN_51_SPI_MO__FUNC_SPI_MO (MTK_PIN_NO(51) | 1)
+#define MT8167_PIN_51_SPI_MO__FUNC_SPI_MI (MTK_PIN_NO(51) | 2)
+#define MT8167_PIN_51_SPI_MO__FUNC_I2S0_MCK (MTK_PIN_NO(51) | 3)
+#define MT8167_PIN_51_SPI_MO__FUNC_I2S2_MCK (MTK_PIN_NO(51) | 4)
+#define MT8167_PIN_51_SPI_MO__FUNC_DBG_MON_A_26 (MTK_PIN_NO(51) | 7)
+
+#define MT8167_PIN_52_SDA1__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8167_PIN_52_SDA1__FUNC_SDA1_0 (MTK_PIN_NO(52) | 1)
+
+#define MT8167_PIN_53_SCL1__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8167_PIN_53_SCL1__FUNC_SCL1_0 (MTK_PIN_NO(53) | 1)
+
+#define MT8167_PIN_54_DISP_PWM__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8167_PIN_54_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(54) | 1)
+#define MT8167_PIN_54_DISP_PWM__FUNC_PWM_B (MTK_PIN_NO(54) | 2)
+#define MT8167_PIN_54_DISP_PWM__FUNC_DBG_MON_B_2 (MTK_PIN_NO(54) | 7)
+
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S0_DI (MTK_PIN_NO(55) | 1)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_UCTS0 (MTK_PIN_NO(55) | 2)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S3_DO (MTK_PIN_NO(55) | 3)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(55) | 4)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_PWM_A (MTK_PIN_NO(55) | 5)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S2_BCK (MTK_PIN_NO(55) | 6)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_DBG_MON_A_28 (MTK_PIN_NO(55) | 7)
+
+#define MT8167_PIN_56_I2S_LRCK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(56) | 1)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S3_LRCK (MTK_PIN_NO(56) | 3)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(56) | 4)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_PWM_B (MTK_PIN_NO(56) | 5)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S2_DI (MTK_PIN_NO(56) | 6)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_DBG_MON_A_29 (MTK_PIN_NO(56) | 7)
+
+#define MT8167_PIN_57_I2S_BCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8167_PIN_57_I2S_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(57) | 1)
+#define MT8167_PIN_57_I2S_BCK__FUNC_URTS0 (MTK_PIN_NO(57) | 2)
+#define MT8167_PIN_57_I2S_BCK__FUNC_I2S3_BCK (MTK_PIN_NO(57) | 3)
+#define MT8167_PIN_57_I2S_BCK__FUNC_I2S_8CH_BCK (MTK_PIN_NO(57) | 4)
+#define MT8167_PIN_57_I2S_BCK__FUNC_PWM_C (MTK_PIN_NO(57) | 5)
+#define MT8167_PIN_57_I2S_BCK__FUNC_I2S2_LRCK (MTK_PIN_NO(57) | 6)
+#define MT8167_PIN_57_I2S_BCK__FUNC_DBG_MON_A_30 (MTK_PIN_NO(57) | 7)
+
+#define MT8167_PIN_58_SDA0__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8167_PIN_58_SDA0__FUNC_SDA0_0 (MTK_PIN_NO(58) | 1)
+
+#define MT8167_PIN_59_SCL0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8167_PIN_59_SCL0__FUNC_SCL0_0 (MTK_PIN_NO(59) | 1)
+
+#define MT8167_PIN_60_SDA2__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8167_PIN_60_SDA2__FUNC_SDA2_0 (MTK_PIN_NO(60) | 1)
+#define MT8167_PIN_60_SDA2__FUNC_PWM_B (MTK_PIN_NO(60) | 2)
+
+#define MT8167_PIN_61_SCL2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8167_PIN_61_SCL2__FUNC_SCL2_0 (MTK_PIN_NO(61) | 1)
+#define MT8167_PIN_61_SCL2__FUNC_PWM_C (MTK_PIN_NO(61) | 2)
+
+#define MT8167_PIN_62_URXD0__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8167_PIN_62_URXD0__FUNC_URXD0 (MTK_PIN_NO(62) | 1)
+#define MT8167_PIN_62_URXD0__FUNC_UTXD0 (MTK_PIN_NO(62) | 2)
+
+#define MT8167_PIN_63_UTXD0__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8167_PIN_63_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(63) | 1)
+#define MT8167_PIN_63_UTXD0__FUNC_URXD0 (MTK_PIN_NO(63) | 2)
+
+#define MT8167_PIN_64_URXD1__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8167_PIN_64_URXD1__FUNC_URXD1 (MTK_PIN_NO(64) | 1)
+#define MT8167_PIN_64_URXD1__FUNC_UTXD1 (MTK_PIN_NO(64) | 2)
+#define MT8167_PIN_64_URXD1__FUNC_DBG_MON_A_27 (MTK_PIN_NO(64) | 7)
+
+#define MT8167_PIN_65_UTXD1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8167_PIN_65_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(65) | 1)
+#define MT8167_PIN_65_UTXD1__FUNC_URXD1 (MTK_PIN_NO(65) | 2)
+#define MT8167_PIN_65_UTXD1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(65) | 7)
+
+#define MT8167_PIN_66_LCM_RST__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT8167_PIN_66_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(66) | 1)
+#define MT8167_PIN_66_LCM_RST__FUNC_I2S0_MCK (MTK_PIN_NO(66) | 3)
+#define MT8167_PIN_66_LCM_RST__FUNC_DBG_MON_B_3 (MTK_PIN_NO(66) | 7)
+
+#define MT8167_PIN_67_DSI_TE__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT8167_PIN_67_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(67) | 1)
+#define MT8167_PIN_67_DSI_TE__FUNC_I2S_8CH_MCK (MTK_PIN_NO(67) | 3)
+#define MT8167_PIN_67_DSI_TE__FUNC_DBG_MON_B_14 (MTK_PIN_NO(67) | 7)
+
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(68) | 1)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(68) | 2)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_SDA1_0 (MTK_PIN_NO(68) | 3)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_USB_SDA (MTK_PIN_NO(68) | 5)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_I2S3_BCK (MTK_PIN_NO(68) | 6)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_DBG_MON_B_15 (MTK_PIN_NO(68) | 7)
+
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(69) | 1)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(69) | 2)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_SCL1_0 (MTK_PIN_NO(69) | 3)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_DPI_D21 (MTK_PIN_NO(69) | 4)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_USB_SCL (MTK_PIN_NO(69) | 5)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_I2S3_LRCK (MTK_PIN_NO(69) | 6)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_DBG_MON_B_16 (MTK_PIN_NO(69) | 7)
+
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(70) | 1)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(70) | 2)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_DPI_D22 (MTK_PIN_NO(70) | 4)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_UTXD0 (MTK_PIN_NO(70) | 5)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_I2S3_DO (MTK_PIN_NO(70) | 6)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(70) | 7)
+
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(71) | 1)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(71) | 2)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_PWM_A (MTK_PIN_NO(71) | 3)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_I2S3_MCK (MTK_PIN_NO(71) | 4)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_URXD0 (MTK_PIN_NO(71) | 5)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_PWM_B (MTK_PIN_NO(71) | 6)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_DBG_MON_B_18 (MTK_PIN_NO(71) | 7)
+
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(72) | 1)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(72) | 2)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_SDA2_0 (MTK_PIN_NO(72) | 3)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_DPI_D23 (MTK_PIN_NO(72) | 4)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_UTXD1 (MTK_PIN_NO(72) | 5)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_PWM_C (MTK_PIN_NO(72) | 6)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_DBG_MON_B_19 (MTK_PIN_NO(72) | 7)
+
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(73) | 1)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_I2S_8CH_BCK (MTK_PIN_NO(73) | 2)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_SCL2_0 (MTK_PIN_NO(73) | 3)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(73) | 4)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_URXD1 (MTK_PIN_NO(73) | 5)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_PWM_A (MTK_PIN_NO(73) | 6)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_DBG_MON_B_20 (MTK_PIN_NO(73) | 7)
+
+#define MT8167_PIN_74_TDN3__FUNC_GPI74 (MTK_PIN_NO(74) | 0)
+#define MT8167_PIN_74_TDN3__FUNC_TDN3 (MTK_PIN_NO(74) | 1)
+
+#define MT8167_PIN_75_TDP3__FUNC_GPI75 (MTK_PIN_NO(75) | 0)
+#define MT8167_PIN_75_TDP3__FUNC_TDP3 (MTK_PIN_NO(75) | 1)
+
+#define MT8167_PIN_76_TDN2__FUNC_GPI76 (MTK_PIN_NO(76) | 0)
+#define MT8167_PIN_76_TDN2__FUNC_TDN2 (MTK_PIN_NO(76) | 1)
+
+#define MT8167_PIN_77_TDP2__FUNC_GPI77 (MTK_PIN_NO(77) | 0)
+#define MT8167_PIN_77_TDP2__FUNC_TDP2 (MTK_PIN_NO(77) | 1)
+
+#define MT8167_PIN_78_TCN__FUNC_GPI78 (MTK_PIN_NO(78) | 0)
+#define MT8167_PIN_78_TCN__FUNC_TCN (MTK_PIN_NO(78) | 1)
+
+#define MT8167_PIN_79_TCP__FUNC_GPI79 (MTK_PIN_NO(79) | 0)
+#define MT8167_PIN_79_TCP__FUNC_TCP (MTK_PIN_NO(79) | 1)
+
+#define MT8167_PIN_80_TDN1__FUNC_GPI80 (MTK_PIN_NO(80) | 0)
+#define MT8167_PIN_80_TDN1__FUNC_TDN1 (MTK_PIN_NO(80) | 1)
+
+#define MT8167_PIN_81_TDP1__FUNC_GPI81 (MTK_PIN_NO(81) | 0)
+#define MT8167_PIN_81_TDP1__FUNC_TDP1 (MTK_PIN_NO(81) | 1)
+
+#define MT8167_PIN_82_TDN0__FUNC_GPI82 (MTK_PIN_NO(82) | 0)
+#define MT8167_PIN_82_TDN0__FUNC_TDN0 (MTK_PIN_NO(82) | 1)
+
+#define MT8167_PIN_83_TDP0__FUNC_GPI83 (MTK_PIN_NO(83) | 0)
+#define MT8167_PIN_83_TDP0__FUNC_TDP0 (MTK_PIN_NO(83) | 1)
+
+#define MT8167_PIN_84_RDN0__FUNC_GPI84 (MTK_PIN_NO(84) | 0)
+#define MT8167_PIN_84_RDN0__FUNC_RDN0 (MTK_PIN_NO(84) | 1)
+
+#define MT8167_PIN_85_RDP0__FUNC_GPI85 (MTK_PIN_NO(85) | 0)
+#define MT8167_PIN_85_RDP0__FUNC_RDP0 (MTK_PIN_NO(85) | 1)
+
+#define MT8167_PIN_86_RDN1__FUNC_GPI86 (MTK_PIN_NO(86) | 0)
+#define MT8167_PIN_86_RDN1__FUNC_RDN1 (MTK_PIN_NO(86) | 1)
+
+#define MT8167_PIN_87_RDP1__FUNC_GPI87 (MTK_PIN_NO(87) | 0)
+#define MT8167_PIN_87_RDP1__FUNC_RDP1 (MTK_PIN_NO(87) | 1)
+
+#define MT8167_PIN_88_RCN__FUNC_GPI88 (MTK_PIN_NO(88) | 0)
+#define MT8167_PIN_88_RCN__FUNC_RCN (MTK_PIN_NO(88) | 1)
+
+#define MT8167_PIN_89_RCP__FUNC_GPI89 (MTK_PIN_NO(89) | 0)
+#define MT8167_PIN_89_RCP__FUNC_RCP (MTK_PIN_NO(89) | 1)
+
+#define MT8167_PIN_90_RDN2__FUNC_GPI90 (MTK_PIN_NO(90) | 0)
+#define MT8167_PIN_90_RDN2__FUNC_RDN2 (MTK_PIN_NO(90) | 1)
+#define MT8167_PIN_90_RDN2__FUNC_CMDAT8 (MTK_PIN_NO(90) | 2)
+
+#define MT8167_PIN_91_RDP2__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT8167_PIN_91_RDP2__FUNC_RDP2 (MTK_PIN_NO(91) | 1)
+#define MT8167_PIN_91_RDP2__FUNC_CMDAT9 (MTK_PIN_NO(91) | 2)
+
+#define MT8167_PIN_92_RDN3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT8167_PIN_92_RDN3__FUNC_RDN3 (MTK_PIN_NO(92) | 1)
+#define MT8167_PIN_92_RDN3__FUNC_CMDAT4 (MTK_PIN_NO(92) | 2)
+
+#define MT8167_PIN_93_RDP3__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT8167_PIN_93_RDP3__FUNC_RDP3 (MTK_PIN_NO(93) | 1)
+#define MT8167_PIN_93_RDP3__FUNC_CMDAT5 (MTK_PIN_NO(93) | 2)
+
+#define MT8167_PIN_94_RCN_A__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT8167_PIN_94_RCN_A__FUNC_RCN_A (MTK_PIN_NO(94) | 1)
+#define MT8167_PIN_94_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(94) | 2)
+
+#define MT8167_PIN_95_RCP_A__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT8167_PIN_95_RCP_A__FUNC_RCP_A (MTK_PIN_NO(95) | 1)
+#define MT8167_PIN_95_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(95) | 2)
+
+#define MT8167_PIN_96_RDN1_A__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT8167_PIN_96_RDN1_A__FUNC_RDN1_A (MTK_PIN_NO(96) | 1)
+#define MT8167_PIN_96_RDN1_A__FUNC_CMDAT2 (MTK_PIN_NO(96) | 2)
+#define MT8167_PIN_96_RDN1_A__FUNC_CMCSD2 (MTK_PIN_NO(96) | 3)
+
+#define MT8167_PIN_97_RDP1_A__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT8167_PIN_97_RDP1_A__FUNC_RDP1_A (MTK_PIN_NO(97) | 1)
+#define MT8167_PIN_97_RDP1_A__FUNC_CMDAT3 (MTK_PIN_NO(97) | 2)
+#define MT8167_PIN_97_RDP1_A__FUNC_CMCSD3 (MTK_PIN_NO(97) | 3)
+
+#define MT8167_PIN_98_RDN0_A__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT8167_PIN_98_RDN0_A__FUNC_RDN0_A (MTK_PIN_NO(98) | 1)
+#define MT8167_PIN_98_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(98) | 2)
+
+#define MT8167_PIN_99_RDP0_A__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT8167_PIN_99_RDP0_A__FUNC_RDP0_A (MTK_PIN_NO(99) | 1)
+#define MT8167_PIN_99_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(99) | 2)
+
+#define MT8167_PIN_100_CMDAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8167_PIN_100_CMDAT0__FUNC_CMDAT0 (MTK_PIN_NO(100) | 1)
+#define MT8167_PIN_100_CMDAT0__FUNC_CMCSD0 (MTK_PIN_NO(100) | 2)
+#define MT8167_PIN_100_CMDAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(100) | 3)
+#define MT8167_PIN_100_CMDAT0__FUNC_TDM_RX_MCK (MTK_PIN_NO(100) | 5)
+#define MT8167_PIN_100_CMDAT0__FUNC_DBG_MON_B_21 (MTK_PIN_NO(100) | 7)
+
+#define MT8167_PIN_101_CMDAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8167_PIN_101_CMDAT1__FUNC_CMDAT1 (MTK_PIN_NO(101) | 1)
+#define MT8167_PIN_101_CMDAT1__FUNC_CMCSD1 (MTK_PIN_NO(101) | 2)
+#define MT8167_PIN_101_CMDAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(101) | 3)
+#define MT8167_PIN_101_CMDAT1__FUNC_CMFLASH (MTK_PIN_NO(101) | 4)
+#define MT8167_PIN_101_CMDAT1__FUNC_TDM_RX_BCK (MTK_PIN_NO(101) | 5)
+#define MT8167_PIN_101_CMDAT1__FUNC_DBG_MON_B_22 (MTK_PIN_NO(101) | 7)
+
+#define MT8167_PIN_102_CMMCLK__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8167_PIN_102_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(102) | 1)
+#define MT8167_PIN_102_CMMCLK__FUNC_ANT_SEL4 (MTK_PIN_NO(102) | 3)
+#define MT8167_PIN_102_CMMCLK__FUNC_TDM_RX_LRCK (MTK_PIN_NO(102) | 5)
+#define MT8167_PIN_102_CMMCLK__FUNC_DBG_MON_B_23 (MTK_PIN_NO(102) | 7)
+
+#define MT8167_PIN_103_CMPCLK__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8167_PIN_103_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(103) | 1)
+#define MT8167_PIN_103_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(103) | 2)
+#define MT8167_PIN_103_CMPCLK__FUNC_ANT_SEL5 (MTK_PIN_NO(103) | 3)
+#define MT8167_PIN_103_CMPCLK__FUNC_TDM_RX_DI (MTK_PIN_NO(103) | 5)
+#define MT8167_PIN_103_CMPCLK__FUNC_DBG_MON_B_24 (MTK_PIN_NO(103) | 7)
+
+#define MT8167_PIN_104_MSDC1_CMD__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8167_PIN_104_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(104) | 1)
+#define MT8167_PIN_104_MSDC1_CMD__FUNC_SQICS (MTK_PIN_NO(104) | 4)
+#define MT8167_PIN_104_MSDC1_CMD__FUNC_DBG_MON_B_25 (MTK_PIN_NO(104) | 7)
+
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(105) | 1)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_UDI_NTRST_XI (MTK_PIN_NO(105) | 2)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_DFD_NTRST_XI (MTK_PIN_NO(105) | 3)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_SQISO (MTK_PIN_NO(105) | 4)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_GPUEJ_NTRST_XI (MTK_PIN_NO(105) | 5)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_DBG_MON_B_26 (MTK_PIN_NO(105) | 7)
+
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(106) | 1)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_UDI_TMS_XI (MTK_PIN_NO(106) | 2)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_DFD_TMS_XI (MTK_PIN_NO(106) | 3)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_SQISI (MTK_PIN_NO(106) | 4)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_GPUEJ_TMS_XI (MTK_PIN_NO(106) | 5)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_DBG_MON_B_27 (MTK_PIN_NO(106) | 7)
+
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(107) | 1)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_UDI_TCK_XI (MTK_PIN_NO(107) | 2)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_DFD_TCK_XI (MTK_PIN_NO(107) | 3)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_SQIWP (MTK_PIN_NO(107) | 4)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_GPUEJ_TCK_XI (MTK_PIN_NO(107) | 5)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_DBG_MON_B_28 (MTK_PIN_NO(107) | 7)
+
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(108) | 1)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_UDI_TDI_XI (MTK_PIN_NO(108) | 2)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_DFD_TDI_XI (MTK_PIN_NO(108) | 3)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_SQIRST (MTK_PIN_NO(108) | 4)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_GPUEJ_TDI_XI (MTK_PIN_NO(108) | 5)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_DBG_MON_B_29 (MTK_PIN_NO(108) | 7)
+
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(109) | 1)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_UDI_TDO (MTK_PIN_NO(109) | 2)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_DFD_TDO (MTK_PIN_NO(109) | 3)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_SQICK (MTK_PIN_NO(109) | 4)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_GPUEJ_TDO (MTK_PIN_NO(109) | 5)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_DBG_MON_B_30 (MTK_PIN_NO(109) | 7)
+
+#define MT8167_PIN_110_MSDC0_DAT7__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8167_PIN_110_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(110) | 1)
+#define MT8167_PIN_110_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(110) | 4)
+
+#define MT8167_PIN_111_MSDC0_DAT6__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8167_PIN_111_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(111) | 1)
+#define MT8167_PIN_111_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(111) | 4)
+
+#define MT8167_PIN_112_MSDC0_DAT5__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8167_PIN_112_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(112) | 1)
+#define MT8167_PIN_112_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(112) | 4)
+
+#define MT8167_PIN_113_MSDC0_DAT4__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8167_PIN_113_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(113) | 1)
+#define MT8167_PIN_113_MSDC0_DAT4__FUNC_NLD3 (MTK_PIN_NO(113) | 4)
+
+#define MT8167_PIN_114_MSDC0_RSTB__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8167_PIN_114_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(114) | 1)
+#define MT8167_PIN_114_MSDC0_RSTB__FUNC_NLD0 (MTK_PIN_NO(114) | 4)
+
+#define MT8167_PIN_115_MSDC0_CMD__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8167_PIN_115_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(115) | 1)
+#define MT8167_PIN_115_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(115) | 4)
+
+#define MT8167_PIN_116_MSDC0_CLK__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8167_PIN_116_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(116) | 1)
+#define MT8167_PIN_116_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(116) | 4)
+
+#define MT8167_PIN_117_MSDC0_DAT3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8167_PIN_117_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(117) | 1)
+#define MT8167_PIN_117_MSDC0_DAT3__FUNC_NLD1 (MTK_PIN_NO(117) | 4)
+
+#define MT8167_PIN_118_MSDC0_DAT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8167_PIN_118_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(118) | 1)
+#define MT8167_PIN_118_MSDC0_DAT2__FUNC_NLD5 (MTK_PIN_NO(118) | 4)
+
+#define MT8167_PIN_119_MSDC0_DAT1__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8167_PIN_119_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(119) | 1)
+#define MT8167_PIN_119_MSDC0_DAT1__FUNC_NLD8 (MTK_PIN_NO(119) | 4)
+
+#define MT8167_PIN_120_MSDC0_DAT0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8167_PIN_120_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(120) | 1)
+#define MT8167_PIN_120_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(120) | 4)
+#define MT8167_PIN_120_MSDC0_DAT0__FUNC_NLD2 (MTK_PIN_NO(120) | 5)
+
+#define MT8167_PIN_121_CEC__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT8167_PIN_121_CEC__FUNC_CEC (MTK_PIN_NO(121) | 1)
+
+#define MT8167_PIN_122_HTPLG__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT8167_PIN_122_HTPLG__FUNC_HTPLG (MTK_PIN_NO(122) | 1)
+
+#define MT8167_PIN_123_HDMISCK__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT8167_PIN_123_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(123) | 1)
+
+#define MT8167_PIN_124_HDMISD__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT8167_PIN_124_HDMISD__FUNC_HDMISD (MTK_PIN_NO(124) | 1)
+
+#endif /* __DTS_MT8167_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
new file mode 100644
index 0000000000..ebf1a358f4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "mt8167.dtsi"
+#include "pumpkin-common.dtsi"
+
+/ {
+	model = "Pumpkin MT8167";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt8167-pumpkin", "mediatek,mt8167";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
new file mode 100644
index 0000000000..2374c09530
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/clock/mt8167-clk.h>
+#include <dt-bindings/memory/mt8167-larb-port.h>
+#include <dt-bindings/power/mt8167-power.h>
+
+#include "mt8167-pinfunc.h"
+
+#include "mt8516.dtsi"
+
+/ {
+	compatible = "mediatek,mt8167";
+
+	soc {
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8167-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt8167-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		apmixedsys: apmixedsys@10018000 {
+			compatible = "mediatek,mt8167-apmixedsys", "syscon";
+			reg = <0 0x10018000 0 0x710>;
+			#clock-cells = <1>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8167-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			spm: power-controller {
+				compatible = "mediatek,mt8167-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT8167_POWER_DOMAIN_MM {
+					reg = <MT8167_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_SMI_MM>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8167_POWER_DOMAIN_VDEC {
+					reg = <MT8167_POWER_DOMAIN_VDEC>;
+					clocks = <&topckgen CLK_TOP_SMI_MM>,
+						 <&topckgen CLK_TOP_RG_VDEC>;
+					clock-names = "mm", "vdec";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8167_POWER_DOMAIN_ISP {
+					reg = <MT8167_POWER_DOMAIN_ISP>;
+					clocks = <&topckgen CLK_TOP_SMI_MM>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8167_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT8167_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&topckgen CLK_TOP_RG_AXI_MFG>,
+						 <&topckgen CLK_TOP_RG_SLOW_MFG>;
+					clock-names = "axi_mfg", "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+					mediatek,infracfg = <&infracfg>;
+
+					power-domain@MT8167_POWER_DOMAIN_MFG_2D {
+						reg = <MT8167_POWER_DOMAIN_MFG_2D>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8167_POWER_DOMAIN_MFG {
+							reg = <MT8167_POWER_DOMAIN_MFG>;
+							#power-domain-cells = <0>;
+							mediatek,infracfg = <&infracfg>;
+						};
+					};
+				};
+
+				power-domain@MT8167_POWER_DOMAIN_CONN {
+					reg = <MT8167_POWER_DOMAIN_CONN>;
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+			};
+		};
+
+		imgsys: syscon@15000000 {
+			compatible = "mediatek,mt8167-imgsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: syscon@16000000 {
+			compatible = "mediatek,mt8167-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8167-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8167-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		smi_common: smi@14017000 {
+			compatible = "mediatek,mt8167-smi-common";
+			reg = <0 0x14017000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
+		};
+
+		larb0: larb@14016000 {
+			compatible = "mediatek,mt8167-smi-larb";
+			reg = <0 0x14016000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
+		};
+
+		larb1: larb@15001000 {
+			compatible = "mediatek,mt8167-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys CLK_IMG_LARB1_SMI>,
+				 <&imgsys CLK_IMG_LARB1_SMI>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8167_POWER_DOMAIN_ISP>;
+		};
+
+		larb2: larb@16010000 {
+			compatible = "mediatek,mt8167-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys CLK_VDEC_CKEN>,
+				 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8167_POWER_DOMAIN_VDEC>;
+		};
+
+		iommu: m4u@10203000 {
+			compatible = "mediatek,mt8167-m4u";
+			reg = <0 0x10203000 0 0x1000>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_LOW>;
+			#iommu-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
new file mode 100644
index 0000000000..256f245ac0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2019 MediaTek Inc.
+ */
+
+/dts-v1/;
+#include "mt8173-elm-hana.dtsi"
+
+/ {
+	model = "Google Hanawl";
+	chassis-type = "laptop";
+	compatible = "google,hana-rev7", "mediatek,mt8173";
+};
+
+&cpu_thermal {
+	trips {
+		cpu_crit: cpu_crit0 {
+			temperature = <100000>;
+			type = "critical";
+		};
+	};
+};
+
+&gpio_keys {
+	/delete-node/switch-tablet-mode;
+	/delete-node/switch-volume-down;
+	/delete-node/switch-volume-up;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
new file mode 100644
index 0000000000..fcf0cb76a8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+/dts-v1/;
+#include "mt8173-elm-hana.dtsi"
+
+/ {
+	model = "Google Hana";
+	chassis-type = "laptop";
+	compatible = "google,hana-rev6", "google,hana-rev5",
+		     "google,hana-rev4", "google,hana-rev3",
+		     "google,hana", "mediatek,mt8173";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
new file mode 100644
index 0000000000..bdcd35ceca
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+#include "mt8173-elm.dtsi"
+
+&i2c0 {
+	clock-frequency = <200000>;
+};
+
+&i2c3 {
+	touchscreen2: touchscreen@34 {
+		compatible = "melfas,mip4_ts";
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/*
+	 * Lenovo 100e Chromebook 2nd Gen (MTK) and Lenovo 300e Chromebook 2nd
+	 * Gen (MTK) are using synaptics touchscreen (hid-over-i2c driver) as a
+	 * second source touchscreen.
+	 */
+	touchscreen3: touchscreen@20 {
+		compatible = "hid-over-i2c";
+		reg = <0x20>;
+		hid-descr-addr = <0x0020>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c4 {
+	/*
+	 * Lenovo 100e Chromebook 2nd Gen (MTK) and Lenovo 300e Chromebook 2nd
+	 * Gen (MTK) are using synaptics trackpad (hid-over-i2c driver) as a
+	 * second source trackpad.
+	 */
+	trackpad2: trackpad@2c {
+		compatible = "hid-over-i2c";
+		interrupt-parent = <&pio>;
+		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x2c>;
+		hid-descr-addr = <0x0020>;
+		wakeup-source;
+	};
+};
+
+&mmc1 {
+	wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&pio {
+	hdmi_mux_pins: hdmi_mux_pins {
+		pins2 {
+			pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_wp {
+			pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
new file mode 100644
index 0000000000..2390d04204
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+/dts-v1/;
+#include "mt8173-elm.dtsi"
+
+/ {
+	model = "Google Elm";
+	chassis-type = "laptop";
+	compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6",
+		     "google,elm-rev5", "google,elm-rev4", "google,elm-rev3",
+		     "google,elm", "mediatek,mt8173";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
new file mode 100644
index 0000000000..111495622c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -0,0 +1,1206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/regulator/dlg,da9211-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "mt8173.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 1000000>;
+		power-supply = <&bl_fixed_reg>;
+		enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_backlight_en_pins>;
+		status = "okay";
+	};
+
+	bl_fixed_reg: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+		gpio = <&pio 32 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_fixed_pins>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		switch-lid {
+			label = "Lid";
+			gpios = <&pio 69 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		switch-power {
+			label = "Power";
+			gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-source;
+		};
+
+		switch-tablet-mode {
+			label = "Tablet_mode";
+			gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
+			linux,code = <SW_TABLET_MODE>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		switch-volume-down {
+			label = "Volume_down";
+			gpios = <&pio 123 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		switch-volume-up {
+			label = "Volume_up";
+			gpios = <&pio 124 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	panel_fixed_3v3: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "PANEL_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-boot-on;
+		off-on-delay-us = <500000>;
+		gpio = <&pio 41 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_fixed_pins>;
+	};
+
+	ps8640_fixed_1v2: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "PS8640_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <2000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ps8640_fixed_pins>;
+	};
+
+	sdio_fixed_3v3: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_fixed_3v3_pins>;
+	};
+
+	sound: sound {
+		compatible = "mediatek,mt8173-rt5650";
+		mediatek,audio-codec = <&rt5650 &hdmi0>;
+		mediatek,platform = <&afe>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&aud_i2s2>;
+
+		mediatek,mclk = <1>;
+		codec-capture {
+			sound-dai = <&rt5650 1>;
+		};
+	};
+
+	hdmicon: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	watchdog {
+		compatible = "arm,smc-wdt";
+	};
+};
+
+/*
+ * Disable the original MMIO watch dog and switch to the SMC watchdog, which
+ * operates on the same MMIO.
+ */
+&watchdog {
+	status = "disabled";
+};
+
+&mfg_async {
+	domain-supply = <&da9211_vgpu_reg>;
+};
+
+&cec {
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&cpu_thermal {
+	sustainable-power = <4500>; /* milliwatts */
+	trips {
+		threshold: trip-point0 {
+			temperature = <60000>;
+		};
+
+		target: trip-point1 {
+			temperature = <65000>;
+		};
+	};
+};
+
+&dsi0 {
+	status = "okay";
+	ports {
+		port {
+			dsi0_out: endpoint {
+				remote-endpoint = <&ps8640_in>;
+			};
+		};
+	};
+};
+
+&dpi0 {
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_phy {
+	status = "okay";
+	mediatek,ibias = <0xc>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rt5650: audio-codec@1a {
+		compatible = "realtek,rt5650";
+		reg = <0x1a>;
+		avdd-supply = <&mt6397_vgp1_reg>;
+		cpvdd-supply = <&mt6397_vcama_reg>;
+		interrupt-parent = <&pio>;
+		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt5650_irq>;
+		#sound-dai-cells = <1>;
+		realtek,dmic1-data-pin = <2>;
+		realtek,jd-mode = <2>;
+	};
+
+	ps8640: edp-bridge@8 {
+		compatible = "parade,ps8640";
+		reg = <0x8>;
+		powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ps8640_pins>;
+		vdd12-supply = <&ps8640_fixed_1v2>;
+		vdd33-supply = <&mt6397_vgp2_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ps8640_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ps8640_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&panel_fixed_3v3>;
+				backlight = <&backlight>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&ps8640_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <1500000>;
+	status = "okay";
+
+	da9211: da9211@68 {
+		compatible = "dlg,da9211";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			da9211_vcpu_reg: BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp = <2000000>;
+				regulator-max-microamp = <4400000>;
+				regulator-ramp-delay = <10000>;
+				regulator-always-on;
+				regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
+							   DA9211_BUCK_MODE_AUTO>;
+			};
+
+			da9211_vgpu_reg: BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp = <2000000>;
+				regulator-max-microamp = <3000000>;
+				regulator-ramp-delay = <10000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&trackpad_irq>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		interrupt-parent = <&pio>;
+		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x15>;
+		vcc-supply = <&mt6397_vgp6_reg>;
+		wakeup-source;
+	};
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x14015>;
+	mediatek,hs200-cmd-int-delay = <30>;
+	mediatek,hs400-cmd-int-delay = <14>;
+	mediatek,hs400-cmd-resp-sel-rising;
+	vmmc-supply = <&mt6397_vemc_3v3_reg>;
+	vqmmc-supply = <&mt6397_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cd-gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mt6397_vmch_reg>;
+	vqmmc-supply = <&mt6397_vmc_reg>;
+};
+
+&mmc3 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	wakeup-source;
+	cap-sdio-irq;
+	vmmc-supply = <&sdio_fixed_3v3>;
+	vqmmc-supply = <&mt6397_vgp3_reg>;
+	non-removable;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	btmrvl: btmrvl@2 {
+		compatible = "marvell,sd8897-bt";
+		reg = <2>;
+		interrupt-parent = <&pio>;
+		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = /bits/ 16 <0x0d>;
+		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
+	};
+
+	mwifiex: mwifiex@1 {
+		compatible = "marvell,sd8897";
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = <3>;
+	};
+};
+
+&nor_flash {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_gpio1_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&pio {
+	gpio-line-names = "EC_INT_1V8",
+			  "SD_CD_L",
+			  "ALC5514_IRQ",
+			  "ALC5650_IRQ",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it SFWP_B.
+			   */
+			  "AP_FLASH_WP_L",
+			  "SFIN",
+			  "SFCS0",
+			  "SFHOLD",
+			  "SFOUT",
+			  "SFCK",
+			  "WRAP_EVENT_S_EINT10",
+			  "PMU_INT",
+			  "I2S2_WS_ALC5650",
+			  "I2S2_BCK_ALC5650",
+			  "PWR_BTN_1V8",
+			  "DA9212_IRQ",
+			  "IDDIG",
+			  "WATCHDOG",
+			  "CEC",
+			  "HDMISCK",
+			  "HDMISD",
+			  "HTPLG",
+			  "MSDC3_DAT0",
+			  "MSDC3_DAT1",
+			  "MSDC3_DAT2",
+			  "MSDC3_DAT3",
+			  "MSDC3_CLK",
+			  "MSDC3_CMD",
+			  "USB_C0_OC_FLAGB",
+			  "USBA_OC1_L",
+			  "PS8640_1V2_ENABLE",
+			  "THERM_ALERT_N",
+			  "PANEL_LCD_POWER_EN",
+			  "ANX7688_CHIP_PD_C",
+			  "EC_IN_RW_1V8",
+			  "ANX7688_1V_EN_C",
+			  "USB_DP_HPD_C",
+			  "TPM_DAVINT_N",
+			  "MARVELL8897_IRQ",
+			  "EN_USB_A0_PWR",
+			  "USBA_A0_OC_L",
+			  "EN_PP3300_DX_EDP",
+			  "",
+			  "SOC_I2C2_1V8_SDA_400K",
+			  "SOC_I2C2_1V8_SCL_400K",
+			  "SOC_I2C0_1V8_SDA_400K",
+			  "SOC_I2C0_1V8_SCL_400K",
+			  "EMMC_ID1",
+			  "EMMC_ID0",
+			  "MEM_CONFIG3",
+			  "EMMC_ID2",
+			  "MEM_CONFIG1",
+			  "MEM_CONFIG2",
+			  "BRD_ID2",
+			  "MEM_CONFIG0",
+			  "BRD_ID0",
+			  "BRD_ID1",
+			  "EMMC_DAT0",
+			  "EMMC_DAT1",
+			  "EMMC_DAT2",
+			  "EMMC_DAT3",
+			  "EMMC_DAT4",
+			  "EMMC_DAT5",
+			  "EMMC_DAT6",
+			  "EMMC_DAT7",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "EMMC_RCLK",
+			  "PLT_RST_L",
+			  "LID_OPEN_1V8_L",
+			  "AUDIO_SPI_MISO_R",
+			  "",
+			  "AC_OK_1V8",
+			  "SD_DATA0",
+			  "SD_DATA1",
+			  "SD_DATA2",
+			  "SD_DATA3",
+			  "SD_CLK",
+			  "SD_CMD",
+			  "PWRAP_SPI0_MI",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_CK",
+			  "PWRAP_SPI0_CSN",
+			  "",
+			  "",
+			  "WIFI_PDN",
+			  "RTC32K_1V8",
+			  "DISP_PWM0",
+			  "TOUCHSCREEN_INT_L",
+			  "",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "PS8640_MODE_CONF",
+			  "TOUCHSCREEN_RESET_R",
+			  "PLATFORM_PROCHOT_L",
+			  "PANEL_POWER_EN",
+			  "REC_MODE_L",
+			  "EC_FW_UPDATE_L",
+			  "ACCEL2_INT_L",
+			  "HDMI_DP_INT",
+			  "ACCELGYRO3_INT_L",
+			  "ACCELGYRO4_INT_L",
+			  "SPI_EC_CLK",
+			  "SPI_EC_MI",
+			  "SPI_EC_MO",
+			  "SPI_EC_CSN",
+			  "SOC_I2C3_1V8_SDA_400K",
+			  "SOC_I2C3_1V8_SCL_400K",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "PS8640_SYSRSTN_1V8",
+			  "APIN_MAX98090_DOUT2",
+			  "TP_INT_1V8_L_R",
+			  "RST_USB_HUB_R",
+			  "BT_WAKE_L",
+			  "ACCEL1_INT_L",
+			  "TABLET_MODE_L",
+			  "",
+			  "V_UP_IN_L_R",
+			  "V_DOWN_IN_L_R",
+			  "SOC_I2C1_1V8_SDA_1M",
+			  "SOC_I2C1_1V8_SCL_1M",
+			  "PS8640_PDN_1V8",
+			  "MAX98090_LRCLK",
+			  "MAX98090_BCLK",
+			  "MAX98090_MCLK",
+			  "APOUT_MAX98090_DIN",
+			  "APIN_MAX98090_DOUT",
+			  "SOC_I2C4_1V8_SDA_400K",
+			  "SOC_I2C4_1V8_SCL_400K";
+
+	aud_i2s2: aud_i2s2 {
+		pins1 {
+			pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>,
+				 <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>,
+				 <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>,
+				 <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>,
+				 <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>,
+				 <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>,
+				 <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>;
+			bias-pull-down;
+		};
+	};
+
+	bl_fixed_pins: bl_fixed_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>;
+			output-low;
+		};
+	};
+
+	bt_wake_pins: bt_wake_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>;
+			bias-pull-up;
+		};
+	};
+
+	disp_pwm0_pins: disp_pwm0_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
+			output-low;
+		};
+	};
+
+	gpio_keys_pins: gpio_keys_pins {
+		volume_pins {
+			pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>,
+				 <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>;
+			bias-pull-up;
+		};
+
+		tablet_mode_pins {
+			pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>;
+			bias-pull-up;
+		};
+	};
+
+	hdmi_mux_pins: hdmi_mux_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>;
+		};
+	};
+
+	i2c1_pins_a: i2c1 {
+		da9211_pins {
+			pinmux = <MT8173_PIN_15_EINT15__FUNC_GPIO15>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+
+		pins_insert {
+			pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>;
+			bias-pull-up;
+		};
+	};
+
+	mmc3_pins_default: mmc3default {
+		pins_dat {
+			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_cmd {
+			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_ds {
+			pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc3_pins_uhs: mmc3 {
+		pins_dat {
+			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_cmd {
+			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nor_gpio1_pins: nor {
+		pins1 {
+			pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>,
+				 <MT8173_PIN_7_EINT7__FUNC_SFHOLD>,
+				 <MT8173_PIN_8_EINT8__FUNC_SFIN>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+	};
+
+	panel_backlight_en_pins: panel_backlight_en_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_95_PCM_TX__FUNC_GPIO95>;
+		};
+	};
+
+	panel_fixed_pins: panel_fixed_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>;
+		};
+	};
+
+	ps8640_pins: ps8640_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>,
+				 <MT8173_PIN_115_URTS0__FUNC_GPIO115>,
+				 <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>;
+		};
+	};
+
+	ps8640_fixed_pins: ps8640_fixed_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>;
+		};
+	};
+
+	rt5650_irq: rt5650_irq {
+		pins1 {
+			pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>;
+			bias-pull-down;
+		};
+	};
+
+	sdio_fixed_3v3_pins: sdio_fixed_3v3_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>;
+			output-low;
+		};
+	};
+
+	spi_pins_a: spi1 {
+		pins1 {
+			pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>;
+			bias-pull-up;
+		};
+
+		pins_spi {
+			pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>,
+				 <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>,
+				 <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>,
+				 <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>;
+			bias-disable;
+		};
+	};
+
+	trackpad_irq: trackpad_irq {
+		pins1 {
+			pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	usb_pins: usb {
+		pins1 {
+			pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>;
+			output-high;
+			bias-disable;
+		};
+	};
+
+	wifi_wake_pins: wifi_wake_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&pwrap {
+	pmic: pmic {
+		compatible = "mediatek,mt6397";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		clock: mt6397clock {
+			compatible = "mediatek,mt6397-clk";
+			#clock-cells = <1>;
+		};
+
+		pio6397: pinctrl {
+			compatible = "mediatek,mt6397-pinctrl";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+				regulator-always-on;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+
+		rtc: mt6397rtc {
+			compatible = "mediatek,mt6397-rtc";
+		};
+
+		syscfg_pctl_pmic: syscfg_pctl_pmic@c000 {
+			compatible = "mediatek,mt6397-pctl-pmic-syscfg",
+				     "syscon";
+			reg = <0 0x0000c000 0 0x0108>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_a>;
+	mediatek,pad-select = <1>;
+	status = "okay";
+	/* clients */
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0x0>;
+		spi-max-frequency = <12000000>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		google,cros-ec-spi-msg-delay = <500>;
+
+		i2c_tunnel: i2c-tunnel0 {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <1>;
+			};
+		};
+	};
+};
+
+&ssusb {
+	dr_mode = "host";
+	wakeup-source;
+	vusb33-supply = <&mt6397_vusb_reg>;
+	status = "okay";
+};
+
+&thermal {
+	bank0-supply = <&mt6397_vpca15_reg>;
+	bank1-supply = <&da9211_vcpu_reg>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_pins>;
+	vusb33-supply = <&mt6397_vusb_reg>;
+	status = "okay";
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
new file mode 100644
index 0000000000..d258c80213
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt8173.dtsi"
+
+/ {
+	model = "MediaTek MT8173 evaluation board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen { };
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	extcon_usb: extcon_iddig {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb_p1_vbus: regulator-usb-p1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p0_vbus: regulator-usb-p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&mfg_async {
+	domain-supply = <&da9211_vgpu_reg>;
+};
+
+&cec {
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&dpi0 {
+	status = "okay";
+};
+
+&hdmi_phy {
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	buck: da9211@68 {
+		compatible = "dlg,da9211";
+		reg = <0x68>;
+
+		regulators {
+			da9211_vcpu_reg: BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp = <2000000>;
+				regulator-max-microamp = <4400000>;
+				regulator-ramp-delay = <10000>;
+				regulator-always-on;
+			};
+
+			da9211_vgpu_reg: BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp = <2000000>;
+				regulator-max-microamp = <3000000>;
+				regulator-ramp-delay = <10000>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	mediatek,hs200-cmd-int-delay = <26>;
+	mediatek,hs400-cmd-int-delay = <14>;
+	mediatek,hs400-cmd-resp-sel-rising;
+	vmmc-supply = <&mt6397_vemc_3v3_reg>;
+	vqmmc-supply = <&mt6397_vio18_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr25;
+	cd-gpios = <&pio 132 0>;
+	vmmc-supply = <&mt6397_vmch_reg>;
+	vqmmc-supply = <&mt6397_vmc_reg>;
+};
+
+&pio {
+	disp_pwm0_pins: disp_pwm0_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
+			output-low;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+
+		pins_insert {
+			pinmux = <MT8173_PIN_132_I2S0_DATA1__FUNC_GPIO132>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_2mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_2mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	usb_id_pins_float: usb_iddig_pull_up {
+		pins_iddig {
+			pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
+			bias-pull-up;
+		};
+	};
+
+	usb_id_pins_ground: usb_iddig_pull_down {
+		pins_iddig {
+			pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
+			bias-pull-down;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&pwrap {
+	/* Only MT8173 E1 needs USB power domain */
+	power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
+
+	pmic: pmic {
+		compatible = "mediatek,mt6397";
+		interrupt-parent = <&pio>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+				regulator-always-on;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
+};
+
+&pio {
+	spi_pins_a: spi0 {
+		pins_spi {
+			pinmux = <MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_>,
+				<MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_>,
+				<MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_>,
+				<MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_a>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p0_vbus>;
+	extcon = <&extcon_usb>;
+	dr_mode = "otg";
+	wakeup-source;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_id_pins_float>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8173-pinfunc.h
new file mode 100644
index 0000000000..a5e308dc85
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-pinfunc.h
@@ -0,0 +1,674 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
+ */
+
+#ifndef __DTS_MT8173_PINFUNC_H
+#define __DTS_MT8173_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8173_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8173_PIN_0_EINT0__FUNC_IRDA_PDN (MTK_PIN_NO(0) | 1)
+#define MT8173_PIN_0_EINT0__FUNC_I2S1_WS (MTK_PIN_NO(0) | 2)
+#define MT8173_PIN_0_EINT0__FUNC_AUD_SPDIF (MTK_PIN_NO(0) | 3)
+#define MT8173_PIN_0_EINT0__FUNC_UTXD0 (MTK_PIN_NO(0) | 4)
+#define MT8173_PIN_0_EINT0__FUNC_DBG_MON_A_20_ (MTK_PIN_NO(0) | 7)
+
+#define MT8173_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8173_PIN_1_EINT1__FUNC_IRDA_RXD (MTK_PIN_NO(1) | 1)
+#define MT8173_PIN_1_EINT1__FUNC_I2S1_BCK (MTK_PIN_NO(1) | 2)
+#define MT8173_PIN_1_EINT1__FUNC_SDA5 (MTK_PIN_NO(1) | 3)
+#define MT8173_PIN_1_EINT1__FUNC_URXD0 (MTK_PIN_NO(1) | 4)
+#define MT8173_PIN_1_EINT1__FUNC_DBG_MON_A_21_ (MTK_PIN_NO(1) | 7)
+
+#define MT8173_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8173_PIN_2_EINT2__FUNC_IRDA_TXD (MTK_PIN_NO(2) | 1)
+#define MT8173_PIN_2_EINT2__FUNC_I2S1_MCK (MTK_PIN_NO(2) | 2)
+#define MT8173_PIN_2_EINT2__FUNC_SCL5 (MTK_PIN_NO(2) | 3)
+#define MT8173_PIN_2_EINT2__FUNC_UTXD3 (MTK_PIN_NO(2) | 4)
+#define MT8173_PIN_2_EINT2__FUNC_DBG_MON_A_22_ (MTK_PIN_NO(2) | 7)
+
+#define MT8173_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8173_PIN_3_EINT3__FUNC_DSI1_TE (MTK_PIN_NO(3) | 1)
+#define MT8173_PIN_3_EINT3__FUNC_I2S1_DO_1 (MTK_PIN_NO(3) | 2)
+#define MT8173_PIN_3_EINT3__FUNC_SDA3 (MTK_PIN_NO(3) | 3)
+#define MT8173_PIN_3_EINT3__FUNC_URXD3 (MTK_PIN_NO(3) | 4)
+#define MT8173_PIN_3_EINT3__FUNC_DBG_MON_A_23_ (MTK_PIN_NO(3) | 7)
+
+#define MT8173_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8173_PIN_4_EINT4__FUNC_DISP_PWM1 (MTK_PIN_NO(4) | 1)
+#define MT8173_PIN_4_EINT4__FUNC_I2S1_DO_2 (MTK_PIN_NO(4) | 2)
+#define MT8173_PIN_4_EINT4__FUNC_SCL3 (MTK_PIN_NO(4) | 3)
+#define MT8173_PIN_4_EINT4__FUNC_UCTS3 (MTK_PIN_NO(4) | 4)
+#define MT8173_PIN_4_EINT4__FUNC_SFWP_B (MTK_PIN_NO(4) | 6)
+
+#define MT8173_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8173_PIN_5_EINT5__FUNC_PCM1_CLK (MTK_PIN_NO(5) | 1)
+#define MT8173_PIN_5_EINT5__FUNC_I2S2_WS (MTK_PIN_NO(5) | 2)
+#define MT8173_PIN_5_EINT5__FUNC_SPI_CK_3_ (MTK_PIN_NO(5) | 3)
+#define MT8173_PIN_5_EINT5__FUNC_URTS3 (MTK_PIN_NO(5) | 4)
+#define MT8173_PIN_5_EINT5__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(5) | 5)
+#define MT8173_PIN_5_EINT5__FUNC_SFOUT (MTK_PIN_NO(5) | 6)
+
+#define MT8173_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8173_PIN_6_EINT6__FUNC_PCM1_SYNC (MTK_PIN_NO(6) | 1)
+#define MT8173_PIN_6_EINT6__FUNC_I2S2_BCK (MTK_PIN_NO(6) | 2)
+#define MT8173_PIN_6_EINT6__FUNC_SPI_MI_3_ (MTK_PIN_NO(6) | 3)
+#define MT8173_PIN_6_EINT6__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(6) | 5)
+#define MT8173_PIN_6_EINT6__FUNC_SFCS0 (MTK_PIN_NO(6) | 6)
+
+#define MT8173_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8173_PIN_7_EINT7__FUNC_PCM1_DI (MTK_PIN_NO(7) | 1)
+#define MT8173_PIN_7_EINT7__FUNC_I2S2_DI_1 (MTK_PIN_NO(7) | 2)
+#define MT8173_PIN_7_EINT7__FUNC_SPI_MO_3_ (MTK_PIN_NO(7) | 3)
+#define MT8173_PIN_7_EINT7__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(7) | 5)
+#define MT8173_PIN_7_EINT7__FUNC_SFHOLD (MTK_PIN_NO(7) | 6)
+
+#define MT8173_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8173_PIN_8_EINT8__FUNC_PCM1_DO (MTK_PIN_NO(8) | 1)
+#define MT8173_PIN_8_EINT8__FUNC_I2S2_DI_2 (MTK_PIN_NO(8) | 2)
+#define MT8173_PIN_8_EINT8__FUNC_SPI_CS_3_ (MTK_PIN_NO(8) | 3)
+#define MT8173_PIN_8_EINT8__FUNC_AUD_SPDIF (MTK_PIN_NO(8) | 4)
+#define MT8173_PIN_8_EINT8__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(8) | 5)
+#define MT8173_PIN_8_EINT8__FUNC_SFIN (MTK_PIN_NO(8) | 6)
+
+#define MT8173_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8173_PIN_9_EINT9__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(9) | 1)
+#define MT8173_PIN_9_EINT9__FUNC_I2S2_MCK (MTK_PIN_NO(9) | 2)
+#define MT8173_PIN_9_EINT9__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(9) | 4)
+#define MT8173_PIN_9_EINT9__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(9) | 5)
+#define MT8173_PIN_9_EINT9__FUNC_SFCK (MTK_PIN_NO(9) | 6)
+
+#define MT8173_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8173_PIN_10_EINT10__FUNC_CLKM0 (MTK_PIN_NO(10) | 1)
+#define MT8173_PIN_10_EINT10__FUNC_DSI1_TE (MTK_PIN_NO(10) | 2)
+#define MT8173_PIN_10_EINT10__FUNC_DISP_PWM1 (MTK_PIN_NO(10) | 3)
+#define MT8173_PIN_10_EINT10__FUNC_PWM4 (MTK_PIN_NO(10) | 4)
+#define MT8173_PIN_10_EINT10__FUNC_IRDA_RXD (MTK_PIN_NO(10) | 5)
+
+#define MT8173_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8173_PIN_11_EINT11__FUNC_CLKM1 (MTK_PIN_NO(11) | 1)
+#define MT8173_PIN_11_EINT11__FUNC_I2S3_WS (MTK_PIN_NO(11) | 2)
+#define MT8173_PIN_11_EINT11__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(11) | 3)
+#define MT8173_PIN_11_EINT11__FUNC_PWM5 (MTK_PIN_NO(11) | 4)
+#define MT8173_PIN_11_EINT11__FUNC_IRDA_TXD (MTK_PIN_NO(11) | 5)
+#define MT8173_PIN_11_EINT11__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(11) | 6)
+#define MT8173_PIN_11_EINT11__FUNC_DBG_MON_B_30_ (MTK_PIN_NO(11) | 7)
+
+#define MT8173_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8173_PIN_12_EINT12__FUNC_CLKM2 (MTK_PIN_NO(12) | 1)
+#define MT8173_PIN_12_EINT12__FUNC_I2S3_BCK (MTK_PIN_NO(12) | 2)
+#define MT8173_PIN_12_EINT12__FUNC_SRCLKENA0 (MTK_PIN_NO(12) | 3)
+#define MT8173_PIN_12_EINT12__FUNC_I2S2_WS (MTK_PIN_NO(12) | 5)
+#define MT8173_PIN_12_EINT12__FUNC_DBG_MON_B_32_ (MTK_PIN_NO(12) | 7)
+
+#define MT8173_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8173_PIN_13_EINT13__FUNC_CLKM3 (MTK_PIN_NO(13) | 1)
+#define MT8173_PIN_13_EINT13__FUNC_I2S3_MCK (MTK_PIN_NO(13) | 2)
+#define MT8173_PIN_13_EINT13__FUNC_SRCLKENA0 (MTK_PIN_NO(13) | 3)
+#define MT8173_PIN_13_EINT13__FUNC_I2S2_BCK (MTK_PIN_NO(13) | 5)
+#define MT8173_PIN_13_EINT13__FUNC_DBG_MON_A_32_ (MTK_PIN_NO(13) | 7)
+
+#define MT8173_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8173_PIN_14_EINT14__FUNC_CMDAT0 (MTK_PIN_NO(14) | 1)
+#define MT8173_PIN_14_EINT14__FUNC_CMCSD0 (MTK_PIN_NO(14) | 2)
+#define MT8173_PIN_14_EINT14__FUNC_CLKM2 (MTK_PIN_NO(14) | 4)
+#define MT8173_PIN_14_EINT14__FUNC_DBG_MON_B_6_ (MTK_PIN_NO(14) | 7)
+
+#define MT8173_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8173_PIN_15_EINT15__FUNC_CMDAT1 (MTK_PIN_NO(15) | 1)
+#define MT8173_PIN_15_EINT15__FUNC_CMCSD1 (MTK_PIN_NO(15) | 2)
+#define MT8173_PIN_15_EINT15__FUNC_CMFLASH (MTK_PIN_NO(15) | 3)
+#define MT8173_PIN_15_EINT15__FUNC_CLKM3 (MTK_PIN_NO(15) | 4)
+#define MT8173_PIN_15_EINT15__FUNC_DBG_MON_B_29_ (MTK_PIN_NO(15) | 7)
+
+#define MT8173_PIN_16_IDDIG__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8173_PIN_16_IDDIG__FUNC_IDDIG (MTK_PIN_NO(16) | 1)
+#define MT8173_PIN_16_IDDIG__FUNC_CMFLASH (MTK_PIN_NO(16) | 2)
+#define MT8173_PIN_16_IDDIG__FUNC_PWM5 (MTK_PIN_NO(16) | 4)
+
+#define MT8173_PIN_17_WATCHDOG__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8173_PIN_17_WATCHDOG__FUNC_WATCHDOG_AO (MTK_PIN_NO(17) | 1)
+
+#define MT8173_PIN_18_CEC__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8173_PIN_18_CEC__FUNC_CEC (MTK_PIN_NO(18) | 1)
+
+#define MT8173_PIN_19_HDMISCK__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8173_PIN_19_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(19) | 1)
+#define MT8173_PIN_19_HDMISCK__FUNC_HDCP_SCL (MTK_PIN_NO(19) | 2)
+
+#define MT8173_PIN_20_HDMISD__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8173_PIN_20_HDMISD__FUNC_HDMISD (MTK_PIN_NO(20) | 1)
+#define MT8173_PIN_20_HDMISD__FUNC_HDCP_SDA (MTK_PIN_NO(20) | 2)
+
+#define MT8173_PIN_21_HTPLG__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8173_PIN_21_HTPLG__FUNC_HTPLG (MTK_PIN_NO(21) | 1)
+
+#define MT8173_PIN_22_MSDC3_DAT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(22) | 1)
+
+#define MT8173_PIN_23_MSDC3_DAT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(23) | 1)
+
+#define MT8173_PIN_24_MSDC3_DAT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(24) | 1)
+
+#define MT8173_PIN_25_MSDC3_DAT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(25) | 1)
+
+#define MT8173_PIN_26_MSDC3_CLK__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(26) | 1)
+
+#define MT8173_PIN_27_MSDC3_CMD__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(27) | 1)
+
+#define MT8173_PIN_28_MSDC3_DSL__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8173_PIN_28_MSDC3_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(28) | 1)
+
+#define MT8173_PIN_29_UCTS2__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8173_PIN_29_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(29) | 1)
+
+#define MT8173_PIN_30_URTS2__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8173_PIN_30_URTS2__FUNC_URTS2 (MTK_PIN_NO(30) | 1)
+
+#define MT8173_PIN_31_URXD2__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8173_PIN_31_URXD2__FUNC_URXD2 (MTK_PIN_NO(31) | 1)
+#define MT8173_PIN_31_URXD2__FUNC_UTXD2 (MTK_PIN_NO(31) | 2)
+
+#define MT8173_PIN_32_UTXD2__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8173_PIN_32_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(32) | 1)
+#define MT8173_PIN_32_UTXD2__FUNC_URXD2 (MTK_PIN_NO(32) | 2)
+
+#define MT8173_PIN_33_DAICLK__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8173_PIN_33_DAICLK__FUNC_MRG_CLK (MTK_PIN_NO(33) | 1)
+#define MT8173_PIN_33_DAICLK__FUNC_PCM0_CLK (MTK_PIN_NO(33) | 2)
+
+#define MT8173_PIN_34_DAIPCMIN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8173_PIN_34_DAIPCMIN__FUNC_MRG_DI (MTK_PIN_NO(34) | 1)
+#define MT8173_PIN_34_DAIPCMIN__FUNC_PCM0_DI (MTK_PIN_NO(34) | 2)
+
+#define MT8173_PIN_35_DAIPCMOUT__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8173_PIN_35_DAIPCMOUT__FUNC_MRG_DO (MTK_PIN_NO(35) | 1)
+#define MT8173_PIN_35_DAIPCMOUT__FUNC_PCM0_DO (MTK_PIN_NO(35) | 2)
+
+#define MT8173_PIN_36_DAISYNC__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8173_PIN_36_DAISYNC__FUNC_MRG_SYNC (MTK_PIN_NO(36) | 1)
+#define MT8173_PIN_36_DAISYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(36) | 2)
+
+#define MT8173_PIN_37_EINT16__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8173_PIN_37_EINT16__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(37) | 1)
+#define MT8173_PIN_37_EINT16__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(37) | 2)
+#define MT8173_PIN_37_EINT16__FUNC_PWM0 (MTK_PIN_NO(37) | 3)
+#define MT8173_PIN_37_EINT16__FUNC_PWM1 (MTK_PIN_NO(37) | 4)
+#define MT8173_PIN_37_EINT16__FUNC_PWM2 (MTK_PIN_NO(37) | 5)
+#define MT8173_PIN_37_EINT16__FUNC_CLKM0 (MTK_PIN_NO(37) | 6)
+
+#define MT8173_PIN_38_CONN_RST__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8173_PIN_38_CONN_RST__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(38) | 1)
+#define MT8173_PIN_38_CONN_RST__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(38) | 2)
+#define MT8173_PIN_38_CONN_RST__FUNC_CLKM1 (MTK_PIN_NO(38) | 6)
+
+#define MT8173_PIN_39_CM2MCLK__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8173_PIN_39_CM2MCLK__FUNC_CM2MCLK (MTK_PIN_NO(39) | 1)
+#define MT8173_PIN_39_CM2MCLK__FUNC_CMCSD0 (MTK_PIN_NO(39) | 2)
+#define MT8173_PIN_39_CM2MCLK__FUNC_DBG_MON_A_17_ (MTK_PIN_NO(39) | 7)
+
+#define MT8173_PIN_40_CMPCLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8173_PIN_40_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(40) | 1)
+#define MT8173_PIN_40_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(40) | 2)
+#define MT8173_PIN_40_CMPCLK__FUNC_CMCSD2 (MTK_PIN_NO(40) | 3)
+#define MT8173_PIN_40_CMPCLK__FUNC_DBG_MON_A_18_ (MTK_PIN_NO(40) | 7)
+
+#define MT8173_PIN_41_CMMCLK__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8173_PIN_41_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(41) | 1)
+#define MT8173_PIN_41_CMMCLK__FUNC_DBG_MON_A_19_ (MTK_PIN_NO(41) | 7)
+
+#define MT8173_PIN_42_DSI_TE__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8173_PIN_42_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(42) | 1)
+
+#define MT8173_PIN_43_SDA2__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8173_PIN_43_SDA2__FUNC_SDA2 (MTK_PIN_NO(43) | 1)
+
+#define MT8173_PIN_44_SCL2__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8173_PIN_44_SCL2__FUNC_SCL2 (MTK_PIN_NO(44) | 1)
+
+#define MT8173_PIN_45_SDA0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8173_PIN_45_SDA0__FUNC_SDA0 (MTK_PIN_NO(45) | 1)
+
+#define MT8173_PIN_46_SCL0__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8173_PIN_46_SCL0__FUNC_SCL0 (MTK_PIN_NO(46) | 1)
+
+#define MT8173_PIN_47_RDN0_A__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8173_PIN_47_RDN0_A__FUNC_CMDAT2 (MTK_PIN_NO(47) | 1)
+
+#define MT8173_PIN_48_RDP0_A__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8173_PIN_48_RDP0_A__FUNC_CMDAT3 (MTK_PIN_NO(48) | 1)
+
+#define MT8173_PIN_49_RDN1_A__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8173_PIN_49_RDN1_A__FUNC_CMDAT4 (MTK_PIN_NO(49) | 1)
+
+#define MT8173_PIN_50_RDP1_A__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8173_PIN_50_RDP1_A__FUNC_CMDAT5 (MTK_PIN_NO(50) | 1)
+
+#define MT8173_PIN_51_RCN_A__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8173_PIN_51_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(51) | 1)
+
+#define MT8173_PIN_52_RCP_A__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8173_PIN_52_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(52) | 1)
+
+#define MT8173_PIN_53_RDN2_A__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8173_PIN_53_RDN2_A__FUNC_CMDAT8 (MTK_PIN_NO(53) | 1)
+#define MT8173_PIN_53_RDN2_A__FUNC_CMCSD3 (MTK_PIN_NO(53) | 2)
+
+#define MT8173_PIN_54_RDP2_A__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8173_PIN_54_RDP2_A__FUNC_CMDAT9 (MTK_PIN_NO(54) | 1)
+#define MT8173_PIN_54_RDP2_A__FUNC_CMCSD2 (MTK_PIN_NO(54) | 2)
+
+#define MT8173_PIN_55_RDN3_A__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8173_PIN_55_RDN3_A__FUNC_CMHSYNC (MTK_PIN_NO(55) | 1)
+#define MT8173_PIN_55_RDN3_A__FUNC_CMCSD1 (MTK_PIN_NO(55) | 2)
+
+#define MT8173_PIN_56_RDP3_A__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8173_PIN_56_RDP3_A__FUNC_CMVSYNC (MTK_PIN_NO(56) | 1)
+#define MT8173_PIN_56_RDP3_A__FUNC_CMCSD0 (MTK_PIN_NO(56) | 2)
+
+#define MT8173_PIN_57_MSDC0_DAT0__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(57) | 1)
+#define MT8173_PIN_57_MSDC0_DAT0__FUNC_I2S1_WS (MTK_PIN_NO(57) | 2)
+#define MT8173_PIN_57_MSDC0_DAT0__FUNC_DBG_MON_B_7_ (MTK_PIN_NO(57) | 7)
+
+#define MT8173_PIN_58_MSDC0_DAT1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(58) | 1)
+#define MT8173_PIN_58_MSDC0_DAT1__FUNC_I2S1_BCK (MTK_PIN_NO(58) | 2)
+#define MT8173_PIN_58_MSDC0_DAT1__FUNC_DBG_MON_B_8_ (MTK_PIN_NO(58) | 7)
+
+#define MT8173_PIN_59_MSDC0_DAT2__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(59) | 1)
+#define MT8173_PIN_59_MSDC0_DAT2__FUNC_I2S1_MCK (MTK_PIN_NO(59) | 2)
+#define MT8173_PIN_59_MSDC0_DAT2__FUNC_DBG_MON_B_9_ (MTK_PIN_NO(59) | 7)
+
+#define MT8173_PIN_60_MSDC0_DAT3__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(60) | 1)
+#define MT8173_PIN_60_MSDC0_DAT3__FUNC_I2S1_DO_1 (MTK_PIN_NO(60) | 2)
+#define MT8173_PIN_60_MSDC0_DAT3__FUNC_DBG_MON_B_10_ (MTK_PIN_NO(60) | 7)
+
+#define MT8173_PIN_61_MSDC0_DAT4__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(61) | 1)
+#define MT8173_PIN_61_MSDC0_DAT4__FUNC_I2S1_DO_2 (MTK_PIN_NO(61) | 2)
+#define MT8173_PIN_61_MSDC0_DAT4__FUNC_DBG_MON_B_11_ (MTK_PIN_NO(61) | 7)
+
+#define MT8173_PIN_62_MSDC0_DAT5__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(62) | 1)
+#define MT8173_PIN_62_MSDC0_DAT5__FUNC_I2S2_WS (MTK_PIN_NO(62) | 2)
+#define MT8173_PIN_62_MSDC0_DAT5__FUNC_DBG_MON_B_12_ (MTK_PIN_NO(62) | 7)
+
+#define MT8173_PIN_63_MSDC0_DAT6__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(63) | 1)
+#define MT8173_PIN_63_MSDC0_DAT6__FUNC_I2S2_BCK (MTK_PIN_NO(63) | 2)
+#define MT8173_PIN_63_MSDC0_DAT6__FUNC_DBG_MON_B_13_ (MTK_PIN_NO(63) | 7)
+
+#define MT8173_PIN_64_MSDC0_DAT7__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(64) | 1)
+#define MT8173_PIN_64_MSDC0_DAT7__FUNC_I2S2_DI_1 (MTK_PIN_NO(64) | 2)
+#define MT8173_PIN_64_MSDC0_DAT7__FUNC_DBG_MON_B_14_ (MTK_PIN_NO(64) | 7)
+
+#define MT8173_PIN_65_MSDC0_CLK__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(65) | 1)
+#define MT8173_PIN_65_MSDC0_CLK__FUNC_DBG_MON_B_16_ (MTK_PIN_NO(65) | 7)
+
+#define MT8173_PIN_66_MSDC0_CMD__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(66) | 1)
+#define MT8173_PIN_66_MSDC0_CMD__FUNC_I2S2_DI_2 (MTK_PIN_NO(66) | 2)
+#define MT8173_PIN_66_MSDC0_CMD__FUNC_DBG_MON_B_15_ (MTK_PIN_NO(66) | 7)
+
+#define MT8173_PIN_67_MSDC0_DSL__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL (MTK_PIN_NO(67) | 1)
+#define MT8173_PIN_67_MSDC0_DSL__FUNC_DBG_MON_B_17_ (MTK_PIN_NO(67) | 7)
+
+#define MT8173_PIN_68_MSDC0_RST___FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB (MTK_PIN_NO(68) | 1)
+#define MT8173_PIN_68_MSDC0_RST___FUNC_I2S2_MCK (MTK_PIN_NO(68) | 2)
+#define MT8173_PIN_68_MSDC0_RST___FUNC_DBG_MON_B_18_ (MTK_PIN_NO(68) | 7)
+
+#define MT8173_PIN_69_SPI_CK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_ (MTK_PIN_NO(69) | 1)
+#define MT8173_PIN_69_SPI_CK__FUNC_I2S3_DO_1 (MTK_PIN_NO(69) | 2)
+#define MT8173_PIN_69_SPI_CK__FUNC_PWM0 (MTK_PIN_NO(69) | 3)
+#define MT8173_PIN_69_SPI_CK__FUNC_PWM5 (MTK_PIN_NO(69) | 4)
+#define MT8173_PIN_69_SPI_CK__FUNC_I2S2_MCK (MTK_PIN_NO(69) | 5)
+#define MT8173_PIN_69_SPI_CK__FUNC_DBG_MON_B_19_ (MTK_PIN_NO(69) | 7)
+
+#define MT8173_PIN_70_SPI_MI__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_ (MTK_PIN_NO(70) | 1)
+#define MT8173_PIN_70_SPI_MI__FUNC_I2S3_DO_2 (MTK_PIN_NO(70) | 2)
+#define MT8173_PIN_70_SPI_MI__FUNC_PWM1 (MTK_PIN_NO(70) | 3)
+#define MT8173_PIN_70_SPI_MI__FUNC_SPI_MO_0_ (MTK_PIN_NO(70) | 4)
+#define MT8173_PIN_70_SPI_MI__FUNC_I2S2_DI_1 (MTK_PIN_NO(70) | 5)
+#define MT8173_PIN_70_SPI_MI__FUNC_DSI1_TE (MTK_PIN_NO(70) | 6)
+#define MT8173_PIN_70_SPI_MI__FUNC_DBG_MON_B_20_ (MTK_PIN_NO(70) | 7)
+
+#define MT8173_PIN_71_SPI_MO__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_ (MTK_PIN_NO(71) | 1)
+#define MT8173_PIN_71_SPI_MO__FUNC_I2S3_DO_3 (MTK_PIN_NO(71) | 2)
+#define MT8173_PIN_71_SPI_MO__FUNC_PWM2 (MTK_PIN_NO(71) | 3)
+#define MT8173_PIN_71_SPI_MO__FUNC_SPI_MI_0_ (MTK_PIN_NO(71) | 4)
+#define MT8173_PIN_71_SPI_MO__FUNC_I2S2_DI_2 (MTK_PIN_NO(71) | 5)
+#define MT8173_PIN_71_SPI_MO__FUNC_DBG_MON_B_21_ (MTK_PIN_NO(71) | 7)
+
+#define MT8173_PIN_72_SPI_CS__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_ (MTK_PIN_NO(72) | 1)
+#define MT8173_PIN_72_SPI_CS__FUNC_I2S3_DO_4 (MTK_PIN_NO(72) | 2)
+#define MT8173_PIN_72_SPI_CS__FUNC_PWM3 (MTK_PIN_NO(72) | 3)
+#define MT8173_PIN_72_SPI_CS__FUNC_PWM6 (MTK_PIN_NO(72) | 4)
+#define MT8173_PIN_72_SPI_CS__FUNC_DISP_PWM1 (MTK_PIN_NO(72) | 5)
+#define MT8173_PIN_72_SPI_CS__FUNC_DBG_MON_B_22_ (MTK_PIN_NO(72) | 7)
+
+#define MT8173_PIN_73_MSDC1_DAT0__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(73) | 1)
+#define MT8173_PIN_73_MSDC1_DAT0__FUNC_DBG_MON_B_24_ (MTK_PIN_NO(73) | 7)
+
+#define MT8173_PIN_74_MSDC1_DAT1__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(74) | 1)
+#define MT8173_PIN_74_MSDC1_DAT1__FUNC_DBG_MON_B_25_ (MTK_PIN_NO(74) | 7)
+
+#define MT8173_PIN_75_MSDC1_DAT2__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(75) | 1)
+#define MT8173_PIN_75_MSDC1_DAT2__FUNC_DBG_MON_B_26_ (MTK_PIN_NO(75) | 7)
+
+#define MT8173_PIN_76_MSDC1_DAT3__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(76) | 1)
+#define MT8173_PIN_76_MSDC1_DAT3__FUNC_DBG_MON_B_27_ (MTK_PIN_NO(76) | 7)
+
+#define MT8173_PIN_77_MSDC1_CLK__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(77) | 1)
+#define MT8173_PIN_77_MSDC1_CLK__FUNC_DBG_MON_B_28_ (MTK_PIN_NO(77) | 7)
+
+#define MT8173_PIN_78_MSDC1_CMD__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(78) | 1)
+#define MT8173_PIN_78_MSDC1_CMD__FUNC_DBG_MON_B_23_ (MTK_PIN_NO(78) | 7)
+
+#define MT8173_PIN_79_PWRAP_SPI0_MI__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT8173_PIN_79_PWRAP_SPI0_MI__FUNC_PWRAP_SPIMI (MTK_PIN_NO(79) | 1)
+#define MT8173_PIN_79_PWRAP_SPI0_MI__FUNC_PWRAP_SPIMO (MTK_PIN_NO(79) | 2)
+
+#define MT8173_PIN_80_PWRAP_SPI0_MO__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT8173_PIN_80_PWRAP_SPI0_MO__FUNC_PWRAP_SPIMO (MTK_PIN_NO(80) | 1)
+#define MT8173_PIN_80_PWRAP_SPI0_MO__FUNC_PWRAP_SPIMI (MTK_PIN_NO(80) | 2)
+
+#define MT8173_PIN_81_PWRAP_SPI0_CK__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT8173_PIN_81_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK (MTK_PIN_NO(81) | 1)
+
+#define MT8173_PIN_82_PWRAP_SPI0_CSN__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT8173_PIN_82_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS (MTK_PIN_NO(82) | 1)
+
+#define MT8173_PIN_83_AUD_CLK_MOSI__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT8173_PIN_83_AUD_CLK_MOSI__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(83) | 1)
+
+#define MT8173_PIN_84_AUD_DAT_MISO__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT8173_PIN_84_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(84) | 1)
+#define MT8173_PIN_84_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(84) | 2)
+
+#define MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define MT8173_PIN_85_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(85) | 1)
+#define MT8173_PIN_85_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(85) | 2)
+
+#define MT8173_PIN_86_RTC32K_CK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define MT8173_PIN_86_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(86) | 1)
+
+#define MT8173_PIN_87_DISP_PWM0__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0 (MTK_PIN_NO(87) | 1)
+#define MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM1 (MTK_PIN_NO(87) | 2)
+#define MT8173_PIN_87_DISP_PWM0__FUNC_DBG_MON_B_31_ (MTK_PIN_NO(87) | 7)
+
+#define MT8173_PIN_88_SRCLKENAI__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define MT8173_PIN_88_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(88) | 1)
+
+#define MT8173_PIN_89_SRCLKENAI2__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define MT8173_PIN_89_SRCLKENAI2__FUNC_SRCLKENAI2 (MTK_PIN_NO(89) | 1)
+
+#define MT8173_PIN_90_SRCLKENA0__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define MT8173_PIN_90_SRCLKENA0__FUNC_SRCLKENA0 (MTK_PIN_NO(90) | 1)
+
+#define MT8173_PIN_91_SRCLKENA1__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT8173_PIN_91_SRCLKENA1__FUNC_SRCLKENA1 (MTK_PIN_NO(91) | 1)
+
+#define MT8173_PIN_92_PCM_CLK__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT8173_PIN_92_PCM_CLK__FUNC_PCM1_CLK (MTK_PIN_NO(92) | 1)
+#define MT8173_PIN_92_PCM_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(92) | 2)
+#define MT8173_PIN_92_PCM_CLK__FUNC_DBG_MON_A_24_ (MTK_PIN_NO(92) | 7)
+
+#define MT8173_PIN_93_PCM_SYNC__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT8173_PIN_93_PCM_SYNC__FUNC_PCM1_SYNC (MTK_PIN_NO(93) | 1)
+#define MT8173_PIN_93_PCM_SYNC__FUNC_I2S0_WS (MTK_PIN_NO(93) | 2)
+#define MT8173_PIN_93_PCM_SYNC__FUNC_DBG_MON_A_25_ (MTK_PIN_NO(93) | 7)
+
+#define MT8173_PIN_94_PCM_RX__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT8173_PIN_94_PCM_RX__FUNC_PCM1_DI (MTK_PIN_NO(94) | 1)
+#define MT8173_PIN_94_PCM_RX__FUNC_I2S0_DI (MTK_PIN_NO(94) | 2)
+#define MT8173_PIN_94_PCM_RX__FUNC_DBG_MON_A_26_ (MTK_PIN_NO(94) | 7)
+
+#define MT8173_PIN_95_PCM_TX__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define MT8173_PIN_95_PCM_TX__FUNC_PCM1_DO (MTK_PIN_NO(95) | 1)
+#define MT8173_PIN_95_PCM_TX__FUNC_I2S0_DO (MTK_PIN_NO(95) | 2)
+#define MT8173_PIN_95_PCM_TX__FUNC_DBG_MON_A_27_ (MTK_PIN_NO(95) | 7)
+
+#define MT8173_PIN_96_URXD1__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define MT8173_PIN_96_URXD1__FUNC_URXD1 (MTK_PIN_NO(96) | 1)
+#define MT8173_PIN_96_URXD1__FUNC_UTXD1 (MTK_PIN_NO(96) | 2)
+#define MT8173_PIN_96_URXD1__FUNC_DBG_MON_A_28_ (MTK_PIN_NO(96) | 7)
+
+#define MT8173_PIN_97_UTXD1__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define MT8173_PIN_97_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(97) | 1)
+#define MT8173_PIN_97_UTXD1__FUNC_URXD1 (MTK_PIN_NO(97) | 2)
+#define MT8173_PIN_97_UTXD1__FUNC_DBG_MON_A_29_ (MTK_PIN_NO(97) | 7)
+
+#define MT8173_PIN_98_URTS1__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define MT8173_PIN_98_URTS1__FUNC_URTS1 (MTK_PIN_NO(98) | 1)
+#define MT8173_PIN_98_URTS1__FUNC_UCTS1 (MTK_PIN_NO(98) | 2)
+#define MT8173_PIN_98_URTS1__FUNC_DBG_MON_A_30_ (MTK_PIN_NO(98) | 7)
+
+#define MT8173_PIN_99_UCTS1__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define MT8173_PIN_99_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(99) | 1)
+#define MT8173_PIN_99_UCTS1__FUNC_URTS1 (MTK_PIN_NO(99) | 2)
+#define MT8173_PIN_99_UCTS1__FUNC_DBG_MON_A_31_ (MTK_PIN_NO(99) | 7)
+
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(100) | 1)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(100) | 3)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5 (MTK_PIN_NO(100) | 4)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(100) | 5)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_DBG_MON_B_0_ (MTK_PIN_NO(100) | 7)
+
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(101) | 1)
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_AUD_SPDIF (MTK_PIN_NO(101) | 3)
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5 (MTK_PIN_NO(101) | 4)
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_DBG_MON_B_1_ (MTK_PIN_NO(101) | 7)
+
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(102) | 1)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_UTXD0 (MTK_PIN_NO(102) | 3)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_PWM0 (MTK_PIN_NO(102) | 5)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_ (MTK_PIN_NO(102) | 6)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_DBG_MON_B_2_ (MTK_PIN_NO(102) | 7)
+
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(103) | 1)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_URXD0 (MTK_PIN_NO(103) | 3)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_PWM1 (MTK_PIN_NO(103) | 5)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_ (MTK_PIN_NO(103) | 6)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_DBG_MON_B_3_ (MTK_PIN_NO(103) | 7)
+
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(104) | 1)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_UTXD3 (MTK_PIN_NO(104) | 3)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 4)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_PWM2 (MTK_PIN_NO(104) | 5)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_ (MTK_PIN_NO(104) | 6)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_DBG_MON_B_4_ (MTK_PIN_NO(104) | 7)
+
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(105) | 1)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_URXD3 (MTK_PIN_NO(105) | 3)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_SCL3 (MTK_PIN_NO(105) | 4)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_PWM3 (MTK_PIN_NO(105) | 5)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_ (MTK_PIN_NO(105) | 6)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_DBG_MON_B_5_ (MTK_PIN_NO(105) | 7)
+
+#define MT8173_PIN_106_SDA3__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8173_PIN_106_SDA3__FUNC_SDA3 (MTK_PIN_NO(106) | 1)
+
+#define MT8173_PIN_107_SCL3__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8173_PIN_107_SCL3__FUNC_SCL3 (MTK_PIN_NO(107) | 1)
+
+#define MT8173_PIN_108_JTMS__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8173_PIN_108_JTMS__FUNC_JTMS (MTK_PIN_NO(108) | 1)
+#define MT8173_PIN_108_JTMS__FUNC_MFG_JTAG_TMS (MTK_PIN_NO(108) | 2)
+#define MT8173_PIN_108_JTMS__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(108) | 5)
+#define MT8173_PIN_108_JTMS__FUNC_DFD_TMS (MTK_PIN_NO(108) | 6)
+
+#define MT8173_PIN_109_JTCK__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8173_PIN_109_JTCK__FUNC_JTCK (MTK_PIN_NO(109) | 1)
+#define MT8173_PIN_109_JTCK__FUNC_MFG_JTAG_TCK (MTK_PIN_NO(109) | 2)
+#define MT8173_PIN_109_JTCK__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(109) | 5)
+#define MT8173_PIN_109_JTCK__FUNC_DFD_TCK (MTK_PIN_NO(109) | 6)
+
+#define MT8173_PIN_110_JTDI__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8173_PIN_110_JTDI__FUNC_JTDI (MTK_PIN_NO(110) | 1)
+#define MT8173_PIN_110_JTDI__FUNC_MFG_JTAG_TDI (MTK_PIN_NO(110) | 2)
+#define MT8173_PIN_110_JTDI__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(110) | 5)
+#define MT8173_PIN_110_JTDI__FUNC_DFD_TDI (MTK_PIN_NO(110) | 6)
+
+#define MT8173_PIN_111_JTDO__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8173_PIN_111_JTDO__FUNC_JTDO (MTK_PIN_NO(111) | 1)
+#define MT8173_PIN_111_JTDO__FUNC_MFG_JTAG_TDO (MTK_PIN_NO(111) | 2)
+#define MT8173_PIN_111_JTDO__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(111) | 5)
+#define MT8173_PIN_111_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(111) | 6)
+
+#define MT8173_PIN_112_JTRST_B__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8173_PIN_112_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(112) | 1)
+#define MT8173_PIN_112_JTRST_B__FUNC_MFG_JTAG_TRSTN (MTK_PIN_NO(112) | 2)
+#define MT8173_PIN_112_JTRST_B__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(112) | 5)
+#define MT8173_PIN_112_JTRST_B__FUNC_DFD_NTRST (MTK_PIN_NO(112) | 6)
+
+#define MT8173_PIN_113_URXD0__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8173_PIN_113_URXD0__FUNC_URXD0 (MTK_PIN_NO(113) | 1)
+#define MT8173_PIN_113_URXD0__FUNC_UTXD0 (MTK_PIN_NO(113) | 2)
+#define MT8173_PIN_113_URXD0__FUNC_I2S2_WS (MTK_PIN_NO(113) | 6)
+#define MT8173_PIN_113_URXD0__FUNC_DBG_MON_A_0_ (MTK_PIN_NO(113) | 7)
+
+#define MT8173_PIN_114_UTXD0__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8173_PIN_114_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(114) | 1)
+#define MT8173_PIN_114_UTXD0__FUNC_URXD0 (MTK_PIN_NO(114) | 2)
+#define MT8173_PIN_114_UTXD0__FUNC_I2S2_BCK (MTK_PIN_NO(114) | 6)
+#define MT8173_PIN_114_UTXD0__FUNC_DBG_MON_A_1_ (MTK_PIN_NO(114) | 7)
+
+#define MT8173_PIN_115_URTS0__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8173_PIN_115_URTS0__FUNC_URTS0 (MTK_PIN_NO(115) | 1)
+#define MT8173_PIN_115_URTS0__FUNC_UCTS0 (MTK_PIN_NO(115) | 2)
+#define MT8173_PIN_115_URTS0__FUNC_I2S2_MCK (MTK_PIN_NO(115) | 6)
+#define MT8173_PIN_115_URTS0__FUNC_DBG_MON_A_2_ (MTK_PIN_NO(115) | 7)
+
+#define MT8173_PIN_116_UCTS0__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8173_PIN_116_UCTS0__FUNC_UCTS0 (MTK_PIN_NO(116) | 1)
+#define MT8173_PIN_116_UCTS0__FUNC_URTS0 (MTK_PIN_NO(116) | 2)
+#define MT8173_PIN_116_UCTS0__FUNC_I2S2_DI_1 (MTK_PIN_NO(116) | 6)
+#define MT8173_PIN_116_UCTS0__FUNC_DBG_MON_A_3_ (MTK_PIN_NO(116) | 7)
+
+#define MT8173_PIN_117_URXD3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8173_PIN_117_URXD3__FUNC_URXD3 (MTK_PIN_NO(117) | 1)
+#define MT8173_PIN_117_URXD3__FUNC_UTXD3 (MTK_PIN_NO(117) | 2)
+#define MT8173_PIN_117_URXD3__FUNC_DBG_MON_A_9_ (MTK_PIN_NO(117) | 7)
+
+#define MT8173_PIN_118_UTXD3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8173_PIN_118_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(118) | 1)
+#define MT8173_PIN_118_UTXD3__FUNC_URXD3 (MTK_PIN_NO(118) | 2)
+#define MT8173_PIN_118_UTXD3__FUNC_DBG_MON_A_10_ (MTK_PIN_NO(118) | 7)
+
+#define MT8173_PIN_119_KPROW0__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8173_PIN_119_KPROW0__FUNC_KROW0 (MTK_PIN_NO(119) | 1)
+#define MT8173_PIN_119_KPROW0__FUNC_DBG_MON_A_11_ (MTK_PIN_NO(119) | 7)
+
+#define MT8173_PIN_120_KPROW1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8173_PIN_120_KPROW1__FUNC_KROW1 (MTK_PIN_NO(120) | 1)
+#define MT8173_PIN_120_KPROW1__FUNC_PWM6 (MTK_PIN_NO(120) | 3)
+#define MT8173_PIN_120_KPROW1__FUNC_DBG_MON_A_12_ (MTK_PIN_NO(120) | 7)
+
+#define MT8173_PIN_121_KPROW2__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT8173_PIN_121_KPROW2__FUNC_KROW2 (MTK_PIN_NO(121) | 1)
+#define MT8173_PIN_121_KPROW2__FUNC_IRDA_PDN (MTK_PIN_NO(121) | 2)
+#define MT8173_PIN_121_KPROW2__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(121) | 3)
+#define MT8173_PIN_121_KPROW2__FUNC_PWM4 (MTK_PIN_NO(121) | 4)
+#define MT8173_PIN_121_KPROW2__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(121) | 5)
+#define MT8173_PIN_121_KPROW2__FUNC_DBG_MON_A_13_ (MTK_PIN_NO(121) | 7)
+
+#define MT8173_PIN_122_KPCOL0__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT8173_PIN_122_KPCOL0__FUNC_KCOL0 (MTK_PIN_NO(122) | 1)
+#define MT8173_PIN_122_KPCOL0__FUNC_DBG_MON_A_14_ (MTK_PIN_NO(122) | 7)
+
+#define MT8173_PIN_123_KPCOL1__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT8173_PIN_123_KPCOL1__FUNC_KCOL1 (MTK_PIN_NO(123) | 1)
+#define MT8173_PIN_123_KPCOL1__FUNC_IRDA_RXD (MTK_PIN_NO(123) | 2)
+#define MT8173_PIN_123_KPCOL1__FUNC_PWM5 (MTK_PIN_NO(123) | 3)
+#define MT8173_PIN_123_KPCOL1__FUNC_DBG_MON_A_15_ (MTK_PIN_NO(123) | 7)
+
+#define MT8173_PIN_124_KPCOL2__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT8173_PIN_124_KPCOL2__FUNC_KCOL2 (MTK_PIN_NO(124) | 1)
+#define MT8173_PIN_124_KPCOL2__FUNC_IRDA_TXD (MTK_PIN_NO(124) | 2)
+#define MT8173_PIN_124_KPCOL2__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(124) | 3)
+#define MT8173_PIN_124_KPCOL2__FUNC_PWM3 (MTK_PIN_NO(124) | 4)
+#define MT8173_PIN_124_KPCOL2__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(124) | 5)
+#define MT8173_PIN_124_KPCOL2__FUNC_DBG_MON_A_16_ (MTK_PIN_NO(124) | 7)
+
+#define MT8173_PIN_125_SDA1__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT8173_PIN_125_SDA1__FUNC_SDA1 (MTK_PIN_NO(125) | 1)
+
+#define MT8173_PIN_126_SCL1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT8173_PIN_126_SCL1__FUNC_SCL1 (MTK_PIN_NO(126) | 1)
+
+#define MT8173_PIN_127_LCM_RST__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define MT8173_PIN_127_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(127) | 1)
+
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_I2S0_WS (MTK_PIN_NO(128) | 1)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS (MTK_PIN_NO(128) | 2)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_I2S2_WS (MTK_PIN_NO(128) | 3)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_SPI_CK_2_ (MTK_PIN_NO(128) | 5)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_DBG_MON_A_4_ (MTK_PIN_NO(128) | 7)
+
+#define MT8173_PIN_129_I2S0_BCK__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(129) | 1)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(129) | 2)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_I2S2_BCK (MTK_PIN_NO(129) | 3)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_SPI_MI_2_ (MTK_PIN_NO(129) | 5)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_DBG_MON_A_5_ (MTK_PIN_NO(129) | 7)
+
+#define MT8173_PIN_130_I2S0_MCK__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_I2S0_MCK (MTK_PIN_NO(130) | 1)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK (MTK_PIN_NO(130) | 2)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_I2S2_MCK (MTK_PIN_NO(130) | 3)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_SPI_MO_2_ (MTK_PIN_NO(130) | 5)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_DBG_MON_A_6_ (MTK_PIN_NO(130) | 7)
+
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S0_DO (MTK_PIN_NO(131) | 1)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1 (MTK_PIN_NO(131) | 2)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S2_DI_1 (MTK_PIN_NO(131) | 3)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_SPI_CS_2_ (MTK_PIN_NO(131) | 5)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_DBG_MON_A_7_ (MTK_PIN_NO(131) | 7)
+
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_I2S0_DI (MTK_PIN_NO(132) | 1)
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_I2S1_DO_2 (MTK_PIN_NO(132) | 2)
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2 (MTK_PIN_NO(132) | 3)
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_DBG_MON_A_8_ (MTK_PIN_NO(132) | 7)
+
+#define MT8173_PIN_133_SDA4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define MT8173_PIN_133_SDA4__FUNC_SDA4 (MTK_PIN_NO(133) | 1)
+
+#define MT8173_PIN_134_SCL4__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define MT8173_PIN_134_SCL4__FUNC_SCL4 (MTK_PIN_NO(134) | 1)
+
+#endif /* __DTS_MT8173_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
new file mode 100644
index 0000000000..c47d7d900f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -0,0 +1,1523 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ */
+
+#include <dt-bindings/clock/mt8173-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt8173-larb-port.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt8173-power.h>
+#include <dt-bindings/reset/mt8173-resets.h>
+#include <dt-bindings/gce/mt8173-gce.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "mt8173-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt8173";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ovl0 = &ovl0;
+		ovl1 = &ovl1;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+		rdma2 = &rdma2;
+		wdma0 = &wdma0;
+		wdma1 = &wdma1;
+		color0 = &color0;
+		color1 = &color1;
+		split0 = &split0;
+		split1 = &split1;
+		dpi0 = &dpi0;
+		dsi0 = &dsi0;
+		dsi1 = &dsi1;
+		mdp-rdma0 = &mdp_rdma0;
+		mdp-rdma1 = &mdp_rdma1;
+		mdp-rsz0 = &mdp_rsz0;
+		mdp-rsz1 = &mdp_rsz1;
+		mdp-rsz2 = &mdp_rsz2;
+		mdp-wdma0 = &mdp_wdma0;
+		mdp-wrot0 = &mdp_wrot0;
+		mdp-wrot1 = &mdp_wrot1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <859000>;
+		};
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <908000>;
+		};
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <983000>;
+		};
+		opp-1105000000 {
+			opp-hz = /bits/ 64 <1105000000>;
+			opp-microvolt = <1009000>;
+		};
+		opp-1209000000 {
+			opp-hz = /bits/ 64 <1209000000>;
+			opp-microvolt = <1034000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1057000>;
+		};
+		opp-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <1109000>;
+		};
+		opp-1703000000 {
+			opp-hz = /bits/ 64 <1703000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <828000>;
+		};
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <867000>;
+		};
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <927000>;
+		};
+		opp-1209000000 {
+			opp-hz = /bits/ 64 <1209000000>;
+			opp-microvolt = <968000>;
+		};
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <1007000>;
+		};
+		opp-1612000000 {
+			opp-hz = /bits/ 64 <1612000000>;
+			opp-microvolt = <1049000>;
+		};
+		opp-1807000000 {
+			opp-hz = /bits/ 64 <1807000000>;
+			opp-microvolt = <1089000>;
+		};
+		opp-2106000000 {
+			opp-hz = /bits/ 64 <2106000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <263>;
+			clocks = <&infracfg CLK_INFRA_CA53SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <740>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <263>;
+			clocks = <&infracfg CLK_INFRA_CA53SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <740>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <530>;
+			clocks = <&infracfg CLK_INFRA_CA72SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <530>;
+			clocks = <&infracfg CLK_INFRA_CA72SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <639>;
+				exit-latency-us = <680>;
+				min-residency-us = <1088>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
+		};
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off	 = <0x84000002>;
+		cpu_on	 = <0x84000003>;
+	};
+
+	clk26m: oscillator0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
+	cpum_ck: oscillator2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "cpum_ck";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&thermal>;
+			sustainable-power = <1500>; /* milliwatts */
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu2 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xb7000000 0 0x500000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: clock-controller@10000000 {
+			compatible = "mediatek,mt8173-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: power-controller@10001000 {
+			compatible = "mediatek,mt8173-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: power-controller@10003000 {
+			compatible = "mediatek,mt8173-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		syscfg_pctl_a: syscfg_pctl_a@10005000 {
+			compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8173-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl_a>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+
+			hdmi_pin: xxx {
+
+				/*hdmi htplg pin*/
+				pins1 {
+					pinmux = <MT8173_PIN_21_HTPLG__FUNC_HTPLG>;
+					input-enable;
+					bias-pull-down;
+				};
+			};
+
+			i2c0_pins_a: i2c0 {
+				pins1 {
+					pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
+						 <MT8173_PIN_46_SCL0__FUNC_SCL0>;
+					bias-disable;
+				};
+			};
+
+			i2c1_pins_a: i2c1 {
+				pins1 {
+					pinmux = <MT8173_PIN_125_SDA1__FUNC_SDA1>,
+						 <MT8173_PIN_126_SCL1__FUNC_SCL1>;
+					bias-disable;
+				};
+			};
+
+			i2c2_pins_a: i2c2 {
+				pins1 {
+					pinmux = <MT8173_PIN_43_SDA2__FUNC_SDA2>,
+						 <MT8173_PIN_44_SCL2__FUNC_SCL2>;
+					bias-disable;
+				};
+			};
+
+			i2c3_pins_a: i2c3 {
+				pins1 {
+					pinmux = <MT8173_PIN_106_SDA3__FUNC_SDA3>,
+						 <MT8173_PIN_107_SCL3__FUNC_SCL3>;
+					bias-disable;
+				};
+			};
+
+			i2c4_pins_a: i2c4 {
+				pins1 {
+					pinmux = <MT8173_PIN_133_SDA4__FUNC_SDA4>,
+						 <MT8173_PIN_134_SCL4__FUNC_SCL4>;
+					bias-disable;
+				};
+			};
+
+			i2c6_pins_a: i2c6 {
+				pins1 {
+					pinmux = <MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5>,
+						 <MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5>;
+					bias-disable;
+				};
+			};
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8173-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT8173_POWER_DOMAIN_VDEC {
+					reg = <MT8173_POWER_DOMAIN_VDEC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_VENC {
+					reg = <MT8173_POWER_DOMAIN_VENC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_VENC_SEL>;
+					clock-names = "mm", "venc";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_ISP {
+					reg = <MT8173_POWER_DOMAIN_ISP>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_MM {
+					reg = <MT8173_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_VENC_LT {
+					reg = <MT8173_POWER_DOMAIN_VENC_LT>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_VENC_LT_SEL>;
+					clock-names = "mm", "venclt";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_AUDIO {
+					reg = <MT8173_POWER_DOMAIN_AUDIO>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_USB {
+					reg = <MT8173_POWER_DOMAIN_USB>;
+					#power-domain-cells = <0>;
+				};
+				mfg_async: power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&clk26m>;
+					clock-names = "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8173_POWER_DOMAIN_MFG_2D {
+						reg = <MT8173_POWER_DOMAIN_MFG_2D>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8173_POWER_DOMAIN_MFG {
+							reg = <MT8173_POWER_DOMAIN_MFG>;
+							#power-domain-cells = <0>;
+							mediatek,infracfg = <&infracfg>;
+						};
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8173-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x100>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8173-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_CLK_13M>,
+				 <&topckgen CLK_TOP_RTC_SEL>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8173-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT8173_INFRA_PMIC_WRAP_RST>;
+			reset-names = "pwrap";
+			clocks = <&infracfg CLK_INFRA_PMICSPI>, <&infracfg CLK_INFRA_PMICWRAP>;
+			clock-names = "spi", "wrap";
+		};
+
+		cec: cec@10013000 {
+			compatible = "mediatek,mt8173-cec";
+			reg = <0 0x10013000 0 0xbc>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_CEC>;
+			status = "disabled";
+		};
+
+		vpu: vpu@10020000 {
+			compatible = "mediatek,mt8173-vpu";
+			reg = <0 0x10020000 0 0x30000>,
+			      <0 0x10050000 0 0x100>;
+			reg-names = "tcm", "cfg_reg";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_SCP_SEL>;
+			clock-names = "main";
+			memory-region = <&vpu_dma_reserved>;
+		};
+
+		sysirq: intpol-controller@10200620 {
+			compatible = "mediatek,mt8173-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt8173-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_M4U>;
+			clock-names = "bclk";
+			mediatek,infracfg = <&infracfg>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+					 <&larb3>, <&larb4>, <&larb5>;
+			#iommu-cells = <1>;
+		};
+
+		efuse: efuse@10206000 {
+			compatible = "mediatek,mt8173-efuse";
+			reg = <0 0x10206000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			thermal_calibration: calib@528 {
+				reg = <0x528 0xc>;
+			};
+		};
+
+		apmixedsys: clock-controller@10209000 {
+			compatible = "mediatek,mt8173-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		hdmi_phy: hdmi-phy@10209100 {
+			compatible = "mediatek,mt8173-hdmi-phy";
+			reg = <0 0x10209100 0 0x24>;
+			clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+			clock-names = "pll_ref";
+			clock-output-names = "hdmitx_dig_cts";
+			mediatek,ibias = <0xa>;
+			mediatek,ibias_up = <0x1c>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		gce: mailbox@10212000 {
+			compatible = "mediatek,mt8173-gce";
+			reg = <0 0x10212000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+			#mbox-cells = <2>;
+		};
+
+		mipi_tx0: dsi-phy@10215000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10215000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@10216000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10216000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10221000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10221000 0 0x1000>,
+			      <0 0x10222000 0 0x2000>,
+			      <0 0x10224000 0 0x2000>,
+			      <0 0x10226000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		auxadc: auxadc@11001000 {
+			compatible = "mediatek,mt8173-auxadc";
+			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&pericfg CLK_PERI_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8173-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8173-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8173-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt8173-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11007000 0 0x70>,
+			      <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C0>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11008000 0 0x70>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C1>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11009000 0 0x70>,
+			      <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C2>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt8173-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&pericfg CLK_PERI_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		thermal: thermal@1100b000 {
+			#thermal-sensor-cells = <0>;
+			compatible = "mediatek,mt8173-thermal";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+			clock-names = "therm", "auxadc";
+			resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		nor_flash: spi@1100d000 {
+			compatible = "mediatek,mt8173-nor";
+			reg = <0 0x1100d000 0 0xe0>;
+			assigned-clocks = <&topckgen CLK_TOP_SPI_SEL>;
+			assigned-clock-parents = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_SPI>,
+				 <&topckgen CLK_TOP_SPINFI_IFR_SEL>,
+				 <&pericfg CLK_PERI_NFI>;
+			clock-names = "spi", "sf", "axi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11010000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11010000 0 0x70>,
+			      <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C3>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11011000 0 0x70>,
+			      <0 0x11000300 0 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C4>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hdmiddc0: i2c@11012000 {
+			compatible = "mediatek,mt8173-hdmi-ddc";
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0 0x11012000 0 0x1C>;
+			clocks = <&pericfg CLK_PERI_I2C5>;
+			clock-names = "ddc-i2c";
+		};
+
+		i2c6: i2c@11013000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11013000 0 0x70>,
+			      <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C6>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		afe: audio-controller@11220000  {
+			compatible = "mediatek,mt8173-afe-pcm";
+			reg = <0 0x11220000 0 0x1000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_AUDIO>;
+			clocks = <&infracfg CLK_INFRA_AUDIO>,
+				 <&topckgen CLK_TOP_AUDIO_SEL>,
+				 <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+				 <&topckgen CLK_TOP_APLL1_DIV0>,
+				 <&topckgen CLK_TOP_APLL2_DIV0>,
+				 <&topckgen CLK_TOP_I2S0_M_SEL>,
+				 <&topckgen CLK_TOP_I2S1_M_SEL>,
+				 <&topckgen CLK_TOP_I2S2_M_SEL>,
+				 <&topckgen CLK_TOP_I2S3_M_SEL>,
+				 <&topckgen CLK_TOP_I2S3_B_SEL>;
+			clock-names = "infra_sys_audio_clk",
+				      "top_pdn_audio",
+				      "top_pdn_aud_intbus",
+				      "bck0",
+				      "bck1",
+				      "i2s0_m",
+				      "i2s1_m",
+				      "i2s2_m",
+				      "i2s3_m",
+				      "i2s3_b";
+			assigned-clocks = <&topckgen CLK_TOP_AUD_1_SEL>,
+					  <&topckgen CLK_TOP_AUD_2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_APLL1>,
+						 <&topckgen CLK_TOP_APLL2>;
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8173-mmc";
+			reg = <0 0x11230000 0 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_0>,
+				 <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8173-mmc";
+			reg = <0 0x11240000 0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_1>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8173-mmc";
+			reg = <0 0x11250000 0 0x1000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_2>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc3: mmc@11260000 {
+			compatible = "mediatek,mt8173-mmc";
+			reg = <0 0x11260000 0 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_3>,
+				 <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		ssusb: usb@11271000 {
+			compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
+			reg = <0 0x11271000 0 0x3000>,
+			      <0 0x11280700 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+			clock-names = "sys_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: usb@11270000 {
+				compatible = "mediatek,mt8173-xhci",
+					     "mediatek,mtk-xhci";
+				reg = <0 0x11270000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+				power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
+				clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+				clock-names = "sys_ck", "ref_ck";
+				status = "disabled";
+			};
+		};
+
+		u3phy: t-phy@11290000 {
+			compatible = "mediatek,mt8173-u3phy";
+			reg = <0 0x11290000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "okay";
+
+			u2port0: usb-phy@11290800 {
+				reg = <0 0x11290800 0 0x100>;
+				clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@11290900 {
+				reg = <0 0x11290900 0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u2port1: usb-phy@11291000 {
+				reg = <0 0x11291000 0 0x100>;
+				clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8173-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
+			assigned-clock-rates = <400000000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		mdp_rdma0: rdma@14001000 {
+			compatible = "mediatek,mt8173-mdp-rdma",
+				     "mediatek,mt8173-mdp";
+			reg = <0 0x14001000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+				 <&mmsys CLK_MM_MUTEX_32K>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+			mediatek,vpu = <&vpu>;
+		};
+
+		mdp_rdma1: rdma@14002000 {
+			compatible = "mediatek,mt8173-mdp-rdma";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA1>,
+				 <&mmsys CLK_MM_MUTEX_32K>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA1>;
+		};
+
+		mdp_rsz0: rsz@14003000 {
+			compatible = "mediatek,mt8173-mdp-rsz";
+			reg = <0 0x14003000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+		};
+
+		mdp_rsz1: rsz@14004000 {
+			compatible = "mediatek,mt8173-mdp-rsz";
+			reg = <0 0x14004000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+		};
+
+		mdp_rsz2: rsz@14005000 {
+			compatible = "mediatek,mt8173-mdp-rsz";
+			reg = <0 0x14005000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ2>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+		};
+
+		mdp_wdma0: wdma@14006000 {
+			compatible = "mediatek,mt8173-mdp-wdma";
+			reg = <0 0x14006000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WDMA>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_WDMA>;
+		};
+
+		mdp_wrot0: wrot@14007000 {
+			compatible = "mediatek,mt8173-mdp-wrot";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WROT0>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+		};
+
+		mdp_wrot1: wrot@14008000 {
+			compatible = "mediatek,mt8173-mdp-wrot";
+			reg = <0 0x14008000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WROT1>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_WROT1>;
+		};
+
+		ovl0: ovl@1400c000 {
+			compatible = "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+		};
+
+		ovl1: ovl@1400d000 {
+			compatible = "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL1>;
+			iommus = <&iommu M4U_PORT_DISP_OVL1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+		};
+
+		rdma0: rdma@1400e000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+		};
+
+		rdma1: rdma@1400f000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
+		rdma2: rdma@14010000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+		};
+
+		wdma0: wdma@14011000 {
+			compatible = "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14011000 0 0x1000>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+		};
+
+		wdma1: wdma@14012000 {
+			compatible = "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14012000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+		};
+
+		color0: color@14013000 {
+			compatible = "mediatek,mt8173-disp-color";
+			reg = <0 0x14013000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+		};
+
+		color1: color@14014000 {
+			compatible = "mediatek,mt8173-disp-color";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
+		};
+
+		aal@14015000 {
+			compatible = "mediatek,mt8173-disp-aal";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_AAL>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+		};
+
+		gamma@14016000 {
+			compatible = "mediatek,mt8173-disp-gamma";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+		};
+
+		merge@14017000 {
+			compatible = "mediatek,mt8173-disp-merge";
+			reg = <0 0x14017000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_MERGE>;
+		};
+
+		split0: split@14018000 {
+			compatible = "mediatek,mt8173-disp-split";
+			reg = <0 0x14018000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+		};
+
+		split1: split@14019000 {
+			compatible = "mediatek,mt8173-disp-split";
+			reg = <0 0x14019000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT1>;
+		};
+
+		ufoe@1401a000 {
+			compatible = "mediatek,mt8173-disp-ufoe";
+			reg = <0 0x1401a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_UFOE>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
+		};
+
+		dsi0: dsi@1401b000 {
+			compatible = "mediatek,mt8173-dsi";
+			reg = <0 0x1401b000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI0_ENGINE>,
+				 <&mmsys CLK_MM_DSI0_DIGITAL>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dsi1: dsi@1401c000 {
+			compatible = "mediatek,mt8173-dsi";
+			reg = <0 0x1401c000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI1_ENGINE>,
+				 <&mmsys CLK_MM_DSI1_DIGITAL>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dpi0: dpi@1401d000 {
+			compatible = "mediatek,mt8173-dpi";
+			reg = <0 0x1401d000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+				 <&mmsys CLK_MM_DPI_ENGINE>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+
+			port {
+				dpi0_out: endpoint {
+					remote-endpoint = <&hdmi0_in>;
+				};
+			};
+		};
+
+		pwm0: pwm@1401e000 {
+			compatible = "mediatek,mt8173-disp-pwm",
+				     "mediatek,mt6595-disp-pwm";
+			reg = <0 0x1401e000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM026M>,
+				 <&mmsys CLK_MM_DISP_PWM0MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		pwm1: pwm@1401f000 {
+			compatible = "mediatek,mt8173-disp-pwm",
+				     "mediatek,mt6595-disp-pwm";
+			reg = <0 0x1401f000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM126M>,
+				 <&mmsys CLK_MM_DISP_PWM1MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		mutex: mutex@14020000 {
+			compatible = "mediatek,mt8173-disp-mutex";
+			reg = <0 0x14020000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MUTEX_32K>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+                                              <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+		};
+
+		larb0: larb@14021000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x14021000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+		};
+
+		smi_common: smi@14022000 {
+			compatible = "mediatek,mt8173-smi-common";
+			reg = <0 0x14022000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+		};
+
+		od@14023000 {
+			compatible = "mediatek,mt8173-disp-od";
+			reg = <0 0x14023000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OD>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
+		};
+
+		hdmi0: hdmi@14025000 {
+			compatible = "mediatek,mt8173-hdmi";
+			reg = <0 0x14025000 0 0x400>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+				 <&mmsys CLK_MM_HDMI_PLLCK>,
+				 <&mmsys CLK_MM_HDMI_AUDIO>,
+				 <&mmsys CLK_MM_HDMI_SPDIF>;
+			clock-names = "pixel", "pll", "bclk", "spdif";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pin>;
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi";
+			mediatek,syscon-hdmi = <&mmsys 0x900>;
+			assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>;
+			assigned-clock-parents = <&hdmi_phy>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hdmi0_in: endpoint {
+						remote-endpoint = <&dpi0_out>;
+					};
+				};
+			};
+		};
+
+		larb4: larb@14027000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x14027000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_LARB4>,
+				 <&mmsys CLK_MM_SMI_LARB4>;
+			clock-names = "apb", "smi";
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8173-imgsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: larb@15001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_ISP>;
+			clocks = <&imgsys CLK_IMG_LARB2_SMI>,
+				 <&imgsys CLK_IMG_LARB2_SMI>;
+			clock-names = "apb", "smi";
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8173-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vcodec_dec: vcodec@16000000 {
+			compatible = "mediatek,mt8173-vcodec-dec";
+			reg = <0 0x16000000 0 0x100>,	/* VDEC_SYS */
+			      <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
+			      <0 0x16021000 0 0x800>,	/* VDEC_LD */
+			      <0 0x16021800 0 0x800>,	/* VDEC_TOP */
+			      <0 0x16022000 0 0x1000>,	/* VDEC_CM */
+			      <0 0x16023000 0 0x1000>,	/* VDEC_AD */
+			      <0 0x16024000 0 0x1000>,	/* VDEC_AV */
+			      <0 0x16025000 0 0x1000>,	/* VDEC_PP */
+			      <0 0x16026800 0 0x800>,	/* VDEC_HWD */
+			      <0 0x16027000 0 0x800>,	/* VDEC_HWQ */
+			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
+			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+			mediatek,vpu = <&vpu>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
+			clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+				 <&topckgen CLK_TOP_UNIVPLL_D2>,
+				 <&topckgen CLK_TOP_CCI400_SEL>,
+				 <&topckgen CLK_TOP_VDEC_SEL>,
+				 <&topckgen CLK_TOP_VCODECPLL>,
+				 <&apmixedsys CLK_APMIXED_VENCPLL>,
+				 <&topckgen CLK_TOP_VENC_LT_SEL>,
+				 <&topckgen CLK_TOP_VCODECPLL_370P5>;
+			clock-names = "vcodecpll",
+				      "univpll_d2",
+				      "clk_cci400_sel",
+				      "vdec_sel",
+				      "vdecpll",
+				      "vencpll",
+				      "venc_lt_sel",
+				      "vdec_bus_clk_src";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+					  <&topckgen CLK_TOP_CCI400_SEL>,
+					  <&topckgen CLK_TOP_VDEC_SEL>,
+					  <&apmixedsys CLK_APMIXED_VCODECPLL>,
+					  <&apmixedsys CLK_APMIXED_VENCPLL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+						 <&topckgen CLK_TOP_UNIVPLL_D2>,
+						 <&topckgen CLK_TOP_VCODECPLL>;
+			assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
+		};
+
+		larb1: larb@16010000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_CKEN>,
+				 <&vdecsys CLK_VDEC_LARB_CKEN>;
+			clock-names = "apb", "smi";
+		};
+
+		vencsys: clock-controller@18000000 {
+			compatible = "mediatek,mt8173-vencsys", "syscon";
+			reg = <0 0x18000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb3: larb@18001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x18001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_CKE1>,
+				 <&vencsys CLK_VENC_CKE0>;
+			clock-names = "apb", "smi";
+		};
+
+		vcodec_enc_avc: vcodec@18002000 {
+			compatible = "mediatek,mt8173-vcodec-enc";
+			reg = <0 0x18002000 0 0x1000>;	/* VENC_SYS */
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_VENC_RCPU>,
+				 <&iommu M4U_PORT_VENC_REC>,
+				 <&iommu M4U_PORT_VENC_BSDMA>,
+				 <&iommu M4U_PORT_VENC_SV_COMV>,
+				 <&iommu M4U_PORT_VENC_RD_COMV>,
+				 <&iommu M4U_PORT_VENC_CUR_LUMA>,
+				 <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+				 <&iommu M4U_PORT_VENC_REF_LUMA>,
+				 <&iommu M4U_PORT_VENC_REF_CHROMA>,
+				 <&iommu M4U_PORT_VENC_NBM_RDMA>,
+				 <&iommu M4U_PORT_VENC_NBM_WDMA>;
+			mediatek,vpu = <&vpu>;
+			clocks = <&topckgen CLK_TOP_VENC_SEL>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
+		};
+
+		jpegdec: jpegdec@18004000 {
+			compatible = "mediatek,mt8173-jpgdec";
+			reg = <0 0x18004000 0 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&vencsys CLK_VENC_CKE0>,
+				 <&vencsys CLK_VENC_CKE3>;
+			clock-names = "jpgdec-smi",
+				      "jpgdec";
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
+			iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
+				 <&iommu M4U_PORT_JPGDEC_BSDMA>;
+		};
+
+		vencltsys: clock-controller@19000000 {
+			compatible = "mediatek,mt8173-vencltsys", "syscon";
+			reg = <0 0x19000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb5: larb@19001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x19001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC_LT>;
+			clocks = <&vencltsys CLK_VENCLT_CKE1>,
+				 <&vencltsys CLK_VENCLT_CKE0>;
+			clock-names = "apb", "smi";
+		};
+
+		vcodec_enc_vp8: vcodec@19002000 {
+			compatible = "mediatek,mt8173-vcodec-enc-vp8";
+			reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
+				 <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+				 <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+				 <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+				 <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+				 <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+				 <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+				 <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+				 <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+			mediatek,vpu = <&vpu>;
+			clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+			clock-names = "venc_lt_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+			assigned-clock-parents =
+				 <&topckgen CLK_TOP_VCODECPLL_370P5>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC_LT>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
new file mode 100644
index 0000000000..77f9ab94c0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt8183.dtsi"
+#include "mt6358.dtsi"
+
+/ {
+	model = "MediaTek MT8183 evaluation board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+
+	thermal-sensor {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <390000>;
+		pulldown-ohm = <0>;
+		io-channels = <&auxadc 0>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&mt6358_vgpu_reg>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_1>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_3>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_4>;
+	status = "okay";
+	clock-frequency = <1000000>;
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_5>;
+	status = "okay";
+	clock-frequency = <1000000>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x12814>;
+	vmmc-supply = <&mt6358_vemc_reg>;
+	vqmmc-supply = <&mt6358_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	vmmc-supply = <&mt6358_vmch_reg>;
+	vqmmc-supply = <&mt6358_vmc_reg>;
+	keep-power-in-suspend;
+	wakeup-source;
+	non-removable;
+};
+
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&pio {
+	i2c_pins_0: i2c0 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
+				 <PINMUX_GPIO83__FUNC_SCL0>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_1: i2c1 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
+				 <PINMUX_GPIO84__FUNC_SCL1>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_2: i2c2 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
+				 <PINMUX_GPIO104__FUNC_SDA2>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_3: i2c3 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+				 <PINMUX_GPIO51__FUNC_SDA3>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_4: i2c4 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
+				 <PINMUX_GPIO106__FUNC_SDA4>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_5: i2c5 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+				 <PINMUX_GPIO49__FUNC_SDA5>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	spi_pins_0: spi0 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
+				 <PINMUX_GPIO86__FUNC_SPI0_CSB>,
+				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
+				 <PINMUX_GPIO88__FUNC_SPI0_CLK>;
+			bias-disable;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_ds {
+			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				   <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				   <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				   <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				   <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			input-enable;
+			bias-pull-down;
+		};
+
+		pins_pmu {
+			pinmux = <PINMUX_GPIO178__FUNC_GPIO178>,
+				   <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-high;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				   <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				   <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				   <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				   <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			input-enable;
+		};
+	};
+
+	spi_pins_1: spi1 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
+				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
+				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
+				 <PINMUX_GPIO164__FUNC_SPI1_A_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_2: spi2 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
+				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
+				 <PINMUX_GPIO2__FUNC_SPI2_CLK>,
+				 <PINMUX_GPIO94__FUNC_SPI2_MI>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_3: spi3 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
+				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
+				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
+				 <PINMUX_GPIO24__FUNC_SPI3_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_4: spi4 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
+				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
+				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
+				 <PINMUX_GPIO20__FUNC_SPI4_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_5: spi5 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
+				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
+				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
+				 <PINMUX_GPIO16__FUNC_SPI5_CLK>;
+			bias-disable;
+		};
+	};
+
+	pwm_pins_1: pwm1 {
+		pins_pwm {
+			pinmux = <PINMUX_GPIO90__FUNC_PWM_A>;
+		};
+	};
+};
+
+&mfg {
+	domain-supply = <&mt6358_vgpu_reg>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_0>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_1>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_2>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_3>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_4>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_5>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+};
+
+&cci {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu0 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+	pinctrl-0 = <&pwm_pins_1>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi
new file mode 100644
index 0000000000..e4aeea4599
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) da7219-max98357a sound card.
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+#include "mt8183-kukui-audio-da7219.dtsi"
+#include "mt8183-kukui-audio-max98357a.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8183_da7219_max98357";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi
new file mode 100644
index 0000000000..16ce5a3612
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) da7219-rt1015p sound card.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "mt8183-kukui-audio-da7219.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8183_da7219_rt1015p";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
new file mode 100644
index 0000000000..2c69e7658d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) audio fragment for da7219.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+&i2c5 {
+	da7219: da7219@1a {
+		pinctrl-names = "default";
+		pinctrl-0 = <&da7219_pins>;
+		compatible = "dlg,da7219";
+		reg = <0x1a>;
+		interrupt-parent = <&pio>;
+		interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+
+		dlg,micbias-lvl = <2600>;
+		dlg,mic-amp-in-sel = "diff";
+		VDD-supply = <&pp1800_alw>;
+		VDDMIC-supply = <&pp3300_alw>;
+		VDDIO-supply = <&pp1800_alw>;
+
+		status = "okay";
+
+		da7219_aad {
+			dlg,adc-1bit-rpt = <1>;
+			dlg,btn-avg = <4>;
+			dlg,btn-cfg = <50>;
+			dlg,mic-det-thr = <500>;
+			dlg,jack-ins-deb = <20>;
+			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-rem-deb = <1>;
+
+			dlg,a-d-btn-thr = <0xa>;
+			dlg,d-b-btn-thr = <0x16>;
+			dlg,b-c-btn-thr = <0x21>;
+			dlg,c-mic-btn-thr = <0x3E>;
+		};
+	};
+};
+
+&pio {
+	da7219_pins: da7219_pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO165__FUNC_GPIO165>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
+&sound {
+	mediatek,headset-codec = <&da7219>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi
new file mode 100644
index 0000000000..2b60967c0c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) audio fragment for max98357a.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/ {
+	max98357a: max98357a {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&pio 175 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi
new file mode 100644
index 0000000000..658a764fe9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) audio fragment for rt1015p.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/ {
+	rt1015p: rt1015p {
+		compatible = "realtek,rt1015p";
+		sdb-gpios = <&pio 175 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi
new file mode 100644
index 0000000000..260a5f5614
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) ts3a227e-max98357a sound card.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "mt8183-kukui-audio-max98357a.dtsi"
+#include "mt8183-kukui-audio-ts3a227e.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_max98357";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi
new file mode 100644
index 0000000000..2f7d1fa1c9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) mt6358-ts3a227-rt1015p sound card.
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "mt8183-kukui-audio-ts3a227e.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
new file mode 100644
index 0000000000..0799c48ade
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) audio fragment for ts3a227e.
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+&i2c5 {
+	ts3a227e: ts3a227e@3b {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts3a227e_pins>;
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&pio>;
+		interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+	};
+};
+
+&pio {
+	ts3a227e_pins: ts3a227e_pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO157__FUNC_GPIO157>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
+&sound {
+	mediatek,headset-codec = <&ts3a227e>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
new file mode 100644
index 0000000000..19c1e2bee4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google burnet board";
+	chassis-type = "convertible";
+	compatible = "google,burnet", "mediatek,mt8183";
+};
+
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&i2c0 {
+	touchscreen@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <200>;
+		hid-descr-addr = <0x0020>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
new file mode 100644
index 0000000000..072133fb0f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google cozmo board";
+	compatible = "google,cozmo", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_COZMO";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
new file mode 100644
index 0000000000..552bfc7269
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-da7219-max98357a.dtsi"
+
+/ {
+	model = "Google damu board";
+	chassis-type = "convertible";
+	compatible = "google,damu", "mediatek,mt8183";
+};
+
+&touchscreen {
+	status = "okay";
+
+	compatible = "hid-over-i2c";
+	reg = <0x10>;
+	interrupt-parent = <&pio>;
+	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&touchscreen_pins>;
+
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_DAMU";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
new file mode 100644
index 0000000000..77b96ddf64
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel sku1 board";
+	compatible = "google,fennel-sku1", "google,fennel", "mediatek,mt8183";
+
+	pwmleds {
+		compatible = "pwm-leds";
+		keyboard_backlight: led-0 {
+			label = "cros_ec::kbd_backlight";
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+&cros_ec_pwm {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+
+	compatible = "hid-over-i2c";
+	reg = <0x10>;
+	interrupt-parent = <&pio>;
+	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&touchscreen_pins>;
+
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
new file mode 100644
index 0000000000..37e6e58f63
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel sku6 board";
+	compatible = "google,fennel-sku6", "google,fennel", "mediatek,mt8183";
+};
+
+&touchscreen {
+	status = "okay";
+
+	compatible = "hid-over-i2c";
+	reg = <0x10>;
+	interrupt-parent = <&pio>;
+	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&touchscreen_pins>;
+
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+};
+
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
new file mode 100644
index 0000000000..0e09604004
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel sku7 board";
+	compatible = "google,fennel-sku7", "google,fennel", "mediatek,mt8183";
+};
+
+&touchscreen {
+	status = "okay";
+
+	compatible = "hid-over-i2c";
+	reg = <0x10>;
+	interrupt-parent = <&pio>;
+	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&touchscreen_pins>;
+
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+};
+
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
new file mode 100644
index 0000000000..bbe6c338f4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&i2c2 {
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
new file mode 100644
index 0000000000..3fc5a6181d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel14 sku2 board";
+	compatible = "google,fennel-sku2", "google,fennel", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
new file mode 100644
index 0000000000..23ad0b91e9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel14 sku0 board";
+	compatible = "google,fennel-sku0", "google,fennel", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
new file mode 100644
index 0000000000..8ac6bf5b17
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-juniper.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google juniper sku16 board";
+	chassis-type = "convertible";
+	compatible = "google,juniper-sku16", "google,juniper", "mediatek,mt8183";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi
new file mode 100644
index 0000000000..078bc76564
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+&i2c2 {
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_JUNIPER";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
new file mode 100644
index 0000000000..e5bd9191e4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google kappa board";
+	compatible = "google,kappa", "mediatek,mt8183";
+};
+
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
new file mode 100644
index 0000000000..8fa89db03e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-juniper.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google kenzo sku17 board";
+	compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
new file mode 100644
index 0000000000..89208b843b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-willow.dtsi"
+#include "mt8183-kukui-audio-da7219-max98357a.dtsi"
+
+/ {
+	model = "Google willow board sku0";
+	compatible = "google,willow-sku0", "google,willow", "mediatek,mt8183";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
new file mode 100644
index 0000000000..c7b20441d0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-willow.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google willow board sku1";
+	compatible = "google,willow-sku1", "google,willow", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
new file mode 100644
index 0000000000..76d3354016
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+&i2c2 {
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_JUNIPER";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
new file mode 100644
index 0000000000..820260348d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+#include "mt8183-kukui.dtsi"
+/* Must come after mt8183-kukui.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
+
+/ {
+	pp1200_mipibrdg: pp1200-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1200_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1200_mipibrdg_en>;
+
+		enable-active-high;
+		regulator-boot-on;
+
+		gpio = <&pio 54 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_mipibrdg: pp1800-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+		regulator-boot-on;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp3300_panel: pp3300-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_panel_pins>;
+
+		enable-active-high;
+		regulator-boot-on;
+
+		gpio = <&pio 35 GPIO_ACTIVE_HIGH>;
+	};
+
+	vddio_mipibrdg: vddio-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vddio_mipibrdg_en>;
+
+		enable-active-high;
+		regulator-boot-on;
+
+		gpio = <&pio 37 GPIO_ACTIVE_HIGH>;
+	};
+
+	volume_buttons: volume-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_button_pins>;
+
+		button-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <100>;
+
+			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <100>;
+
+			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&cros_ec {
+	cros_ec_pwm: pwm {
+		compatible = "google,cros-ec-pwm";
+		#pwm-cells = <1>;
+		status = "disabled";
+	};
+};
+
+&dsi0 {
+	status = "okay";
+	/delete-property/#size-cells;
+	/delete-property/#address-cells;
+	/delete-node/panel@0;
+	ports {
+		port {
+			dsi_out: endpoint {
+				remote-endpoint = <&anx7625_in>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		panel_flags = <1>;
+		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1200_mipibrdg>;
+		vdd18-supply = <&pp1800_mipibrdg>;
+		vdd33-supply = <&vddio_mipibrdg>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+
+			anx7625_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			anx7625_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_panel>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c_tunnel {
+	google,remote-bus = <2>;
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	pp1200_mipibrdg_en: pp1200-mipibrdg-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	pp3300_panel_pins: pp3300-panel-pins {
+		panel_3v3_enable: panel-3v3-enable {
+			pinmux = <PINMUX_GPIO35__FUNC_GPIO35>;
+			output-low;
+		};
+	};
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	anx7625_pins: anx7625-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>,
+				 <PINMUX_GPIO73__FUNC_GPIO73>;
+			output-low;
+		};
+		pins2 {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		touch-int-odl {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		touch-rst-l {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+			output-high;
+		};
+	};
+
+	trackpad_pins: trackpad-pins {
+		trackpad-int {
+			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
+			input-enable;
+			bias-disable; /* pulled externally */
+		};
+	};
+
+	vddio_mipibrdg_en: vddio-mipibrdg-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
+			output-low;
+		};
+	};
+
+	volume_button_pins: volume-button-pins {
+		voldn-btn-odl {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		volup-btn-odl {
+			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
new file mode 100644
index 0000000000..fcce8ea123
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+	model = "MediaTek kakadu board sku22";
+	chassis-type = "tablet";
+	compatible = "google,kakadu-rev3-sku22", "google,kakadu-rev2-sku22",
+		     "google,kakadu", "mediatek,mt8183";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
new file mode 100644
index 0000000000..ebfabba725
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "MediaTek kakadu board";
+	chassis-type = "tablet";
+	compatible = "google,kakadu-rev3", "google,kakadu-rev2",
+			"google,kakadu", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
new file mode 100644
index 0000000000..a11adeb29b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ */
+
+#include "mt8183-kukui.dtsi"
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_eject>;
+
+		switch-pen-insert {
+			label = "Pen Insert";
+			/* Insert = low, eject = high */
+			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+};
+
+&bluetooth {
+	firmware-name = "nvm_00440302_i2s_eu.bin";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcamio_reg>;
+
+	eeprom@58 {
+		compatible = "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcama2_reg>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcn18_reg>;
+
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcn18_reg>;
+	};
+};
+
+&mipi_tx0 {
+	drive-strength-microamp = <5800>;
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	open_touch: open_touch {
+		irq_pin {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst_pin {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The pen driver doesn't currently support  driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the pen was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the pen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+
+	pen_eject: peneject {
+		pen_eject {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			/* External pull-up. */
+			bias-disable;
+		};
+	};
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KAKADU";
+};
+
+&panel {
+	status = "okay";
+	compatible = "boe,tv105wum-nw0";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
new file mode 100644
index 0000000000..7213cdcca6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ *
+ * SKU: 0x10 => 16
+ *  - bit 8: Camera: 0 (OV5695)
+ *  - bits 7..4: Panel ID: 0x1 (AUO)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku16 board";
+	chassis-type = "tablet";
+	compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
new file mode 100644
index 0000000000..bbf0cd1aa6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ *
+ * SKU: 0x110 => 272
+ *  - bit 8: Camera: 1 (GC5035)
+ *  - bits 7..4: Panel ID: 0x1 (AUO)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku272 board";
+	chassis-type = "tablet";
+	compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
new file mode 100644
index 0000000000..a429ffeac3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ *
+ * SKU: 0x120 => 288
+ *  - bit 8: Camera: 1 (GC5035)
+ *  - bits 7..4: Panel ID: 0x2 (BOE)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku288 board";
+	chassis-type = "tablet";
+	compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
new file mode 100644
index 0000000000..7739358008
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ *
+ * SKU: 0x20 => 32
+ *  - bit 8: Camera: 0 (OV5695)
+ *  - bits 7..4: Panel ID: 0x2 (BOE)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku32 board";
+	compatible = "google,kodama-sku32", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
new file mode 100644
index 0000000000..4864c39e53
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&i2c2 {
+        pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcamio_reg>;
+
+	eeprom@58 {
+		compatible = "atmel,24c64";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcamio_reg>;
+	};
+};
+
+&i2c4 {
+        pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcn18_reg>;
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcn18_reg>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	touch_default: touchdefault {
+		pin_irq {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		touch_pin_reset: pin_reset {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The touchscreen driver doesn't currently support driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the controller was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the touchscreen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KODAMA";
+};
+
+&i2c_tunnel {
+        google,remote-bus = <2>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
new file mode 100644
index 0000000000..4ac75806fa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku0.
+ *
+ * SKU is a 8-bit value (0x00 == 0):
+ *  - Bits 7..4: Panel ID: 0x0 (AUO)
+ *  - Bits 3..0: SKU ID:   0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+	model = "MediaTek krane sku0 board";
+	chassis-type = "tablet";
+	compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "auo,kd101n80-45na";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
new file mode 100644
index 0000000000..095279e55d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku176.
+ *
+ * SKU is a 8-bit value (0xb0 == 176):
+ *  - Bits 7..4: Panel ID: 0xb (BOE)
+ *  - Bits 3..0: SKU ID:   0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+	model = "MediaTek krane sku176 board";
+	chassis-type = "tablet";
+	compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
+};
+
+&panel {
+        status = "okay";
+        compatible = "boe,tv101wum-nl6";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
new file mode 100644
index 0000000000..d5f41c6c98
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include "mt8183-kukui.dtsi"
+#include "mt8183-kukui-audio-max98357a.dtsi"
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bluetooth {
+	firmware-name = "nvm_00440302_i2s_eu.bin";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen4: touchscreen@5d {
+		compatible = "hid-over-i2c";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcamio_reg>;
+
+	eeprom@58 {
+		compatible = "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcama2_reg>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcn18_reg>;
+
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcn18_reg>;
+	};
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	open_touch: open_touch {
+		irq_pin {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst_pin {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The pen driver doesn't currently support  driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the pen was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the pen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "LE_Krane";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_max98357";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
new file mode 100644
index 0000000000..6f333f5cbe
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -0,0 +1,1014 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "mt8183.dtsi"
+#include "mt6358.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight_lcd0: backlight_lcd0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 500000>;
+		power-supply = <&bl_pp5000>;
+		enable-gpios = <&pio 176 0>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+		status = "okay";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	clk32k: oscillator1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	it6505_pp18_reg: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "it6505_pp18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 178 0>;
+		enable-active-high;
+	};
+
+	lcd_pp3300: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_pp3300";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	bl_pp5000: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_pp5000";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	mmc1_fixed_power: regulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mmc1_fixed_io: regulator4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pp1800_alw: regulator5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_alw";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pp3300_alw: regulator6 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_alw";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+
+	sound: mt8183-sound {
+		mediatek,platform = <&afe>;
+		pinctrl-names = "default",
+				"aud_tdm_out_on",
+				"aud_tdm_out_off";
+		pinctrl-0 = <&aud_pins_default>;
+		pinctrl-1 = <&aud_pins_tdm_out_on>;
+		pinctrl-2 = <&aud_pins_tdm_out_off>;
+		status = "okay";
+	};
+
+	btsco: bt-sco {
+		compatible = "linux,bt-sco";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins_pwrseq>;
+
+		/* Toggle WIFI_ENABLE to reset the chip. */
+		reset-gpios = <&pio 119 1>;
+	};
+
+	wifi_wakeup: wifi-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins_wakeup>;
+
+		button-wowlan {
+			label = "Wake on WiFi";
+			gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	tboard_thermistor1: thermal-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1553
+						0 1488
+						5000 1412
+						10000 1326
+						15000 1232
+						20000 1132
+						25000 1029
+						30000 925
+						35000 823
+						40000 726
+						45000 635
+						50000 552
+						55000 478
+						60000 411
+						65000 353
+						70000 303
+						75000 260
+						80000 222
+						85000 190
+						90000 163
+						95000 140
+						100000 121
+						105000 104
+						110000 90
+						115000 78
+						120000 67
+						125000 59>;
+	};
+
+	tboard_thermistor2: thermal-sensor2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1553
+						0 1488
+						5000 1412
+						10000 1326
+						15000 1232
+						20000 1132
+						25000 1029
+						30000 925
+						35000 823
+						40000 726
+						45000 635
+						50000 552
+						55000 478
+						60000 411
+						65000 353
+						70000 303
+						75000 260
+						80000 222
+						85000 190
+						90000 163
+						95000 140
+						100000 121
+						105000 104
+						110000 90
+						115000 78
+						120000 67
+						125000 59>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cci {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu0 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port {
+			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	mali-supply = <&mt6358_vgpu_reg>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x12814>;
+	vmmc-supply = <&mt6358_vemc_reg>;
+	vqmmc-supply = <&mt6358_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	vmmc-supply = <&mmc1_fixed_power>;
+	vqmmc-supply = <&mmc1_fixed_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	wakeup-source;
+	cap-sdio-irq;
+	non-removable;
+	no-mmc;
+	no-sd;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	qca_wifi: qca-wifi@1 {
+		compatible = "qcom,ath10k";
+		reg = <1>;
+	};
+};
+
+&mt6358_vdram2_reg {
+	regulator-always-on;
+};
+
+&mt6358codec {
+	Avdd-supply = <&mt6358_vaud28_reg>;
+};
+
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsim1_reg {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&mt6358_vsim2_reg {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&pio {
+	aud_pins_default: audiopins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
+				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
+				<PINMUX_GPIO101__FUNC_I2S2_LRCK>,
+				<PINMUX_GPIO102__FUNC_I2S2_DI>,
+				<PINMUX_GPIO3__FUNC_I2S3_DO>, /*i2s to da7219/max98357*/
+				<PINMUX_GPIO89__FUNC_I2S5_BCK>,
+				<PINMUX_GPIO90__FUNC_I2S5_LRCK>,
+				<PINMUX_GPIO91__FUNC_I2S5_DO>,
+				<PINMUX_GPIO174__FUNC_I2S0_DI>, /*i2s to wifi/bt*/
+				<PINMUX_GPIO136__FUNC_AUD_CLK_MOSI>,
+				<PINMUX_GPIO137__FUNC_AUD_SYNC_MOSI>,
+				<PINMUX_GPIO138__FUNC_AUD_DAT_MOSI0>,
+				<PINMUX_GPIO139__FUNC_AUD_DAT_MOSI1>,
+				<PINMUX_GPIO140__FUNC_AUD_CLK_MISO>,
+				<PINMUX_GPIO141__FUNC_AUD_SYNC_MISO>,
+				<PINMUX_GPIO142__FUNC_AUD_DAT_MISO0>,
+				<PINMUX_GPIO143__FUNC_AUD_DAT_MISO1>; /*mtkaif3.0*/
+		};
+	};
+
+	aud_pins_tdm_out_on: audiotdmouton {
+		pins-bus {
+			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
+				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
+				<PINMUX_GPIO171__FUNC_TDM_DATA0_2ND>,
+				<PINMUX_GPIO172__FUNC_TDM_DATA1_2ND>,
+				<PINMUX_GPIO173__FUNC_TDM_DATA2_2ND>,
+				<PINMUX_GPIO10__FUNC_TDM_DATA3>; /*8ch-i2s to it6505*/
+			drive-strength = <MTK_DRIVE_6mA>;
+		};
+	};
+
+	aud_pins_tdm_out_off: audiotdmoutoff {
+		pins-bus {
+			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
+				<PINMUX_GPIO170__FUNC_GPIO170>,
+				<PINMUX_GPIO171__FUNC_GPIO171>,
+				<PINMUX_GPIO172__FUNC_GPIO172>,
+				<PINMUX_GPIO173__FUNC_GPIO173>,
+				<PINMUX_GPIO10__FUNC_GPIO10>;
+			input-enable;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_2mA>;
+		};
+	};
+
+	bt_pins: bt-pins {
+		pins-bt-en {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-low;
+		};
+	};
+
+	ec_ap_int_odl: ec-ap-int-odl {
+		pins1 {
+			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	h1_int_od_l: h1-int-od-l {
+		pins1 {
+			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
+				 <PINMUX_GPIO83__FUNC_SCL0>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c1_pins: i2c1 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
+				 <PINMUX_GPIO84__FUNC_SCL1>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
+				 <PINMUX_GPIO104__FUNC_SDA2>;
+			bias-disable;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c3_pins: i2c3 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+				 <PINMUX_GPIO51__FUNC_SDA3>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c4_pins: i2c4 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
+				 <PINMUX_GPIO106__FUNC_SDA4>;
+			bias-disable;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c5_pins: i2c5 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+				 <PINMUX_GPIO49__FUNC_SDA5>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
+				 <PINMUX_GPIO12__FUNC_SDA6>;
+			bias-disable;
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins-default {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-pins-uhs {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+	};
+
+	mmc1_pins_default: mmc1-pins-default {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			input-enable;
+			mediatek,pull-down-adv = <10>;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-pins-uhs {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			mediatek,pull-down-adv = <10>;
+			input-enable;
+		};
+	};
+
+	panel_pins_default: panel-pins-default {
+		panel-reset {
+			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
+			output-low;
+			bias-pull-up;
+		};
+	};
+
+	pwm0_pin_default: pwm0-pin-default {
+		pins1 {
+			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
+			output-high;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <PINMUX_GPIO43__FUNC_DISP_PWM>;
+		};
+	};
+
+	scp_pins: scp {
+		pins-scp-uart {
+			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
+				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
+		};
+	};
+
+	spi0_pins: spi0 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
+				 <PINMUX_GPIO88__FUNC_SPI0_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
+				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
+				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
+				 <PINMUX_GPIO164__FUNC_SPI1_A_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
+				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
+				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
+			bias-disable;
+		};
+		pins-spi-mi {
+			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
+			mediatek,pull-down-adv = <00>;
+		};
+	};
+
+	spi3_pins: spi3 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
+				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
+				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
+				 <PINMUX_GPIO24__FUNC_SPI3_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi4_pins: spi4 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
+				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
+				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
+				 <PINMUX_GPIO20__FUNC_SPI4_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi5_pins: spi5 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
+				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
+				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
+				 <PINMUX_GPIO16__FUNC_SPI5_CLK>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins_default: uart0-pins-default {
+		pins-rx {
+			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins_default: uart1-pins-default {
+		pins-rx {
+			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
+		};
+		pins-rts {
+			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
+			output-enable;
+		};
+		pins-cts {
+			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	uart1_pins_sleep: uart1-pins-sleep {
+		pins-rx {
+			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
+		};
+		pins-rts {
+			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
+			output-enable;
+		};
+		pins-cts {
+			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	wifi_pins_pwrseq: wifi-pins-pwrseq {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
+			output-low;
+		};
+	};
+
+	wifi_pins_wakeup: wifi-pins-wakeup {
+		pins-wifi-wakeup {
+			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
+			input-enable;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin_default>;
+};
+
+&scp {
+	status = "okay";
+
+	firmware-name = "mediatek/mt8183/scp.img";
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+
+	cros_ec {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&mfg_async {
+	domain-supply = <&mt6358_vsram_gpu_reg>;
+};
+
+&mfg {
+	domain-supply = <&mt6358_vgpu_reg>;
+};
+
+&soc_data {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_int_od_l>;
+		interrupt-parent = <&pio>;
+		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	w25q64dw: flash@0 {
+		compatible = "winbond,w25q64dw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+		interrupt-parent = <&pio>;
+		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int_odl>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbc_extcon: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+
+		cbas {
+			compatible = "google,cros-cbas";
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "sink";
+			};
+		};
+	};
+};
+
+&spi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&spi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi5_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&ssusb {
+	dr_mode = "host";
+	wakeup-source;
+	vusb33-supply = <&mt6358_vusb_reg>;
+	status = "okay";
+};
+
+&thermal_zones {
+	tboard1 {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor1>;
+	};
+
+	tboard2 {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor2>;
+	};
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_default>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_pins_default>;
+	pinctrl-1 = <&uart1_pins_sleep>;
+	status = "okay";
+	/delete-property/ interrupts;
+	interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>,
+			      <&pio 121 IRQ_TYPE_EDGE_FALLING>;
+
+	bluetooth: bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		status = "okay";
+		compatible = "qcom,qca6174-bt";
+		enable-gpios = <&pio 120 0>;
+		clocks = <&clk32k>;
+		firmware-name = "nvm_00440302_i2s.bin";
+	};
+};
+
+&usb_host {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vusb33-supply = <&mt6358_vusb_reg>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+	};
+};
+
+#include <arm/cros-ec-sbs.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
new file mode 100644
index 0000000000..b5784a60c3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "mt8183.dtsi"
+#include "mt6358.dtsi"
+
+/ {
+	model = "Pumpkin MT8183";
+	compatible = "mediatek,mt8183-pumpkin", "mediatek,mt8183";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: scp_mem_region@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red {
+			label = "red";
+			gpios = <&pio 155 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pio 156 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	thermistor {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <390000>;
+		pulldown-ohm = <0>;
+		io-channels = <&auxadc 0>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&mt6358_vgpu_reg>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_1>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_3>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_4>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_5>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&keyboard {
+	pinctrl-names = "default";
+	pinctrl-0 = <&keyboard_pins>;
+	status = "okay";
+	linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0x01, 0x00, KEY_VOLUMEUP)>;
+	keypad,num-rows = <2>;
+	keypad,num-columns = <1>;
+	debounce-delay-ms = <32>;
+	mediatek,keys-per-group = <2>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x12814>;
+	vmmc-supply = <&mt6358_vemc_reg>;
+	vqmmc-supply = <&mt6358_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	vmmc-supply = <&mt6358_vmch_reg>;
+	vqmmc-supply = <&mt6358_vmc_reg>;
+	keep-power-in-suspend;
+	wakeup-source;
+	non-removable;
+};
+
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&pio {
+	i2c_pins_0: i2c0 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
+				 <PINMUX_GPIO83__FUNC_SCL0>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_1: i2c1 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
+				 <PINMUX_GPIO84__FUNC_SCL1>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_2: i2c2 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
+				 <PINMUX_GPIO104__FUNC_SDA2>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_3: i2c3 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+				 <PINMUX_GPIO51__FUNC_SDA3>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_4: i2c4 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
+				 <PINMUX_GPIO106__FUNC_SDA4>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_5: i2c5 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+				 <PINMUX_GPIO49__FUNC_SDA5>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO113__FUNC_SCL6>,
+				 <PINMUX_GPIO114__FUNC_SDA6>;
+			mediatek,pull-up-adv = <3>;
+		};
+	};
+
+	keyboard_pins: keyboard {
+		pins_keyboard {
+			pinmux = <PINMUX_GPIO91__FUNC_KPROW1>,
+				 <PINMUX_GPIO92__FUNC_KPROW0>,
+				 <PINMUX_GPIO93__FUNC_KPCOL0>;
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins-default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-pins-uhs {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_ds {
+			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+	};
+
+	mmc1_pins_default: mmc1-pins-default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			input-enable;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_pmu {
+			pinmux = <PINMUX_GPIO178__FUNC_GPIO178>;
+			output-high;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-pins-uhs {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			mediatek,pull-down-adv = <10>;
+			input-enable;
+		};
+	};
+};
+
+&mfg {
+	domain-supply = <&mt6358_vgpu_reg>;
+};
+
+&cpu0 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&scp {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
new file mode 100644
index 0000000000..df6e9990cd
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -0,0 +1,2110 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+#include <dt-bindings/clock/mt8183-clk.h>
+#include <dt-bindings/gce/mt8183-gce.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8183-larb-port.h>
+#include <dt-bindings/power/mt8183-power.h>
+#include <dt-bindings/reset/mt8183-resets.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/pinctrl/mt8183-pinfunc.h>
+
+/ {
+	compatible = "mediatek,mt8183";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		ovl0 = &ovl0;
+		ovl-2l0 = &ovl_2l0;
+		ovl-2l1 = &ovl_2l1;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp0-793000000 {
+			opp-hz = /bits/ 64 <793000000>;
+			opp-microvolt = <650000>;
+			required-opps = <&opp2_00>;
+		};
+		opp0-910000000 {
+			opp-hz = /bits/ 64 <910000000>;
+			opp-microvolt = <687500>;
+			required-opps = <&opp2_01>;
+		};
+		opp0-1014000000 {
+			opp-hz = /bits/ 64 <1014000000>;
+			opp-microvolt = <718750>;
+			required-opps = <&opp2_02>;
+		};
+		opp0-1131000000 {
+			opp-hz = /bits/ 64 <1131000000>;
+			opp-microvolt = <756250>;
+			required-opps = <&opp2_03>;
+		};
+		opp0-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&opp2_04>;
+		};
+		opp0-1326000000 {
+			opp-hz = /bits/ 64 <1326000000>;
+			opp-microvolt = <818750>;
+			required-opps = <&opp2_05>;
+		};
+		opp0-1417000000 {
+			opp-hz = /bits/ 64 <1417000000>;
+			opp-microvolt = <850000>;
+			required-opps = <&opp2_06>;
+		};
+		opp0-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <868750>;
+			required-opps = <&opp2_07>;
+		};
+		opp0-1586000000 {
+			opp-hz = /bits/ 64 <1586000000>;
+			opp-microvolt = <893750>;
+			required-opps = <&opp2_08>;
+		};
+		opp0-1625000000 {
+			opp-hz = /bits/ 64 <1625000000>;
+			opp-microvolt = <906250>;
+			required-opps = <&opp2_09>;
+		};
+		opp0-1677000000 {
+			opp-hz = /bits/ 64 <1677000000>;
+			opp-microvolt = <931250>;
+			required-opps = <&opp2_10>;
+		};
+		opp0-1716000000 {
+			opp-hz = /bits/ 64 <1716000000>;
+			opp-microvolt = <943750>;
+			required-opps = <&opp2_11>;
+		};
+		opp0-1781000000 {
+			opp-hz = /bits/ 64 <1781000000>;
+			opp-microvolt = <975000>;
+			required-opps = <&opp2_12>;
+		};
+		opp0-1846000000 {
+			opp-hz = /bits/ 64 <1846000000>;
+			opp-microvolt = <1000000>;
+			required-opps = <&opp2_13>;
+		};
+		opp0-1924000000 {
+			opp-hz = /bits/ 64 <1924000000>;
+			opp-microvolt = <1025000>;
+			required-opps = <&opp2_14>;
+		};
+		opp0-1989000000 {
+			opp-hz = /bits/ 64 <1989000000>;
+			opp-microvolt = <1050000>;
+			required-opps = <&opp2_15>;
+		};	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp1-793000000 {
+			opp-hz = /bits/ 64 <793000000>;
+			opp-microvolt = <700000>;
+			required-opps = <&opp2_00>;
+		};
+		opp1-910000000 {
+			opp-hz = /bits/ 64 <910000000>;
+			opp-microvolt = <725000>;
+			required-opps = <&opp2_01>;
+		};
+		opp1-1014000000 {
+			opp-hz = /bits/ 64 <1014000000>;
+			opp-microvolt = <750000>;
+			required-opps = <&opp2_02>;
+		};
+		opp1-1131000000 {
+			opp-hz = /bits/ 64 <1131000000>;
+			opp-microvolt = <775000>;
+			required-opps = <&opp2_03>;
+		};
+		opp1-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&opp2_04>;
+		};
+		opp1-1326000000 {
+			opp-hz = /bits/ 64 <1326000000>;
+			opp-microvolt = <825000>;
+			required-opps = <&opp2_05>;
+		};
+		opp1-1417000000 {
+			opp-hz = /bits/ 64 <1417000000>;
+			opp-microvolt = <850000>;
+			required-opps = <&opp2_06>;
+		};
+		opp1-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <875000>;
+			required-opps = <&opp2_07>;
+		};
+		opp1-1586000000 {
+			opp-hz = /bits/ 64 <1586000000>;
+			opp-microvolt = <900000>;
+			required-opps = <&opp2_08>;
+		};
+		opp1-1625000000 {
+			opp-hz = /bits/ 64 <1625000000>;
+			opp-microvolt = <912500>;
+			required-opps = <&opp2_09>;
+		};
+		opp1-1677000000 {
+			opp-hz = /bits/ 64 <1677000000>;
+			opp-microvolt = <931250>;
+			required-opps = <&opp2_10>;
+		};
+		opp1-1716000000 {
+			opp-hz = /bits/ 64 <1716000000>;
+			opp-microvolt = <950000>;
+			required-opps = <&opp2_11>;
+		};
+		opp1-1781000000 {
+			opp-hz = /bits/ 64 <1781000000>;
+			opp-microvolt = <975000>;
+			required-opps = <&opp2_12>;
+		};
+		opp1-1846000000 {
+			opp-hz = /bits/ 64 <1846000000>;
+			opp-microvolt = <1000000>;
+			required-opps = <&opp2_13>;
+		};
+		opp1-1924000000 {
+			opp-hz = /bits/ 64 <1924000000>;
+			opp-microvolt = <1025000>;
+			required-opps = <&opp2_14>;
+		};
+		opp1-1989000000 {
+			opp-hz = /bits/ 64 <1989000000>;
+			opp-microvolt = <1050000>;
+			required-opps = <&opp2_15>;
+		};
+	};
+
+	cci_opp: opp-table-cci {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp2_00: opp-273000000 {
+			opp-hz = /bits/ 64 <273000000>;
+			opp-microvolt = <650000>;
+		};
+		opp2_01: opp-338000000 {
+			opp-hz = /bits/ 64 <338000000>;
+			opp-microvolt = <687500>;
+		};
+		opp2_02: opp-403000000 {
+			opp-hz = /bits/ 64 <403000000>;
+			opp-microvolt = <718750>;
+		};
+		opp2_03: opp-463000000 {
+			opp-hz = /bits/ 64 <463000000>;
+			opp-microvolt = <756250>;
+		};
+		opp2_04: opp-546000000 {
+			opp-hz = /bits/ 64 <546000000>;
+			opp-microvolt = <800000>;
+		};
+		opp2_05: opp-624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <818750>;
+		};
+		opp2_06: opp-689000000 {
+			opp-hz = /bits/ 64 <689000000>;
+			opp-microvolt = <850000>;
+		};
+		opp2_07: opp-767000000 {
+			opp-hz = /bits/ 64 <767000000>;
+			opp-microvolt = <868750>;
+		};
+		opp2_08: opp-845000000 {
+			opp-hz = /bits/ 64 <845000000>;
+			opp-microvolt = <893750>;
+		};
+		opp2_09: opp-871000000 {
+			opp-hz = /bits/ 64 <871000000>;
+			opp-microvolt = <906250>;
+		};
+		opp2_10: opp-923000000 {
+			opp-hz = /bits/ 64 <923000000>;
+			opp-microvolt = <931250>;
+		};
+		opp2_11: opp-962000000 {
+			opp-hz = /bits/ 64 <962000000>;
+			opp-microvolt = <943750>;
+		};
+		opp2_12: opp-1027000000 {
+			opp-hz = /bits/ 64 <1027000000>;
+			opp-microvolt = <975000>;
+		};
+		opp2_13: opp-1092000000 {
+			opp-hz = /bits/ 64 <1092000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp2_14: opp-1144000000 {
+			opp-hz = /bits/ 64 <1144000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp2_15: opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+
+	cci: cci {
+		compatible = "mediatek,mt8183-cci";
+		clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+			 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+		clock-names = "cci", "intermediate";
+		operating-points-v2 = <&cci_opp>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x00010001>;
+				entry-latency-us = <200>;
+				exit-latency-us = <200>;
+				min-residency-us = <800>;
+			};
+
+			CLUSTER_SLEEP0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <250>;
+				exit-latency-us = <400>;
+				min-residency-us = <1000>;
+			};
+			CLUSTER_SLEEP1: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <250>;
+				exit-latency-us = <400>;
+				min-residency-us = <1300>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+	};
+
+	gpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <625000>;
+		};
+
+		opp-320000000 {
+			opp-hz = /bits/ 64 <320000000>;
+			opp-microvolt = <631250>;
+		};
+
+		opp-340000000 {
+			opp-hz = /bits/ 64 <340000000>;
+			opp-microvolt = <637500>;
+		};
+
+		opp-360000000 {
+			opp-hz = /bits/ 64 <360000000>;
+			opp-microvolt = <643750>;
+		};
+
+		opp-380000000 {
+			opp-hz = /bits/ 64 <380000000>;
+			opp-microvolt = <650000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <656250>;
+		};
+
+		opp-420000000 {
+			opp-hz = /bits/ 64 <420000000>;
+			opp-microvolt = <662500>;
+		};
+
+		opp-460000000 {
+			opp-hz = /bits/ 64 <460000000>;
+			opp-microvolt = <675000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <687500>;
+		};
+
+		opp-540000000 {
+			opp-hz = /bits/ 64 <540000000>;
+			opp-microvolt = <700000>;
+		};
+
+		opp-580000000 {
+			opp-hz = /bits/ 64 <580000000>;
+			opp-microvolt = <712500>;
+		};
+
+		opp-620000000 {
+			opp-hz = /bits/ 64 <620000000>;
+			opp-microvolt = <725000>;
+		};
+
+		opp-653000000 {
+			opp-hz = /bits/ 64 <653000000>;
+			opp-microvolt = <743750>;
+		};
+
+		opp-698000000 {
+			opp-hz = /bits/ 64 <698000000>;
+			opp-microvolt = <768750>;
+		};
+
+		opp-743000000 {
+			opp-hz = /bits/ 64 <743000000>;
+			opp-microvolt = <793750>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <825000>;
+		};
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu-a73 {
+		compatible = "arm,cortex-a73-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		soc_data: efuse@8000000 {
+			compatible = "mediatek,mt8183-efuse",
+				     "mediatek,efuse";
+			reg = <0 0x08000000 0 0x0010>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c100000 0 0x200000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+				};
+			};
+		};
+
+		mcucfg: syscon@c530000 {
+			compatible = "mediatek,mt8183-mcucfg", "syscon";
+			reg = <0 0x0c530000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sysirq: interrupt-controller@c530a80 {
+			compatible = "mediatek,mt8183-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x0c530a80 0 0x50>;
+		};
+
+		cpu_debug0: cpu-debug@d410000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd410000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu0>;
+		};
+
+		cpu_debug1: cpu-debug@d510000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd510000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu1>;
+		};
+
+		cpu_debug2: cpu-debug@d610000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd610000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu2>;
+		};
+
+		cpu_debug3: cpu-debug@d710000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd710000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu3>;
+		};
+
+		cpu_debug4: cpu-debug@d810000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd810000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu4>;
+		};
+
+		cpu_debug5: cpu-debug@d910000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd910000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu5>;
+		};
+
+		cpu_debug6: cpu-debug@da10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xda10000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu6>;
+		};
+
+		cpu_debug7: cpu-debug@db10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xdb10000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu7>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8183-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8183-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8183-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8183-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11f20000 0 0x1000>,
+			      <0 0x11e80000 0 0x1000>,
+			      <0 0x11e70000 0 0x1000>,
+			      <0 0x11e90000 0 0x1000>,
+			      <0 0x11d30000 0 0x1000>,
+			      <0 0x11d20000 0 0x1000>,
+			      <0 0x11c50000 0 0x1000>,
+			      <0 0x11f30000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg1", "iocfg2",
+				    "iocfg3", "iocfg4", "iocfg5",
+				    "iocfg6", "iocfg7", "iocfg8",
+				    "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 192>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8183-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8183-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				power-domain@MT8183_POWER_DOMAIN_AUDIO {
+					reg = <MT8183_POWER_DOMAIN_AUDIO>;
+					clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+						 <&infracfg CLK_INFRA_AUDIO>,
+						 <&infracfg CLK_INFRA_AUDIO_26M_BCLK>;
+					clock-names = "audio", "audio1", "audio2";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8183_POWER_DOMAIN_CONN {
+					reg = <MT8183_POWER_DOMAIN_CONN>;
+					mediatek,infracfg = <&infracfg>;
+					#power-domain-cells = <0>;
+				};
+
+				mfg_async: power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&topckgen CLK_TOP_MUX_MFG>;
+					clock-names = "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg: power-domain@MT8183_POWER_DOMAIN_MFG {
+						reg = <MT8183_POWER_DOMAIN_MFG>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8183_POWER_DOMAIN_MFG_CORE0 {
+							reg = <MT8183_POWER_DOMAIN_MFG_CORE0>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8183_POWER_DOMAIN_MFG_CORE1 {
+							reg = <MT8183_POWER_DOMAIN_MFG_CORE1>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8183_POWER_DOMAIN_MFG_2D {
+							reg = <MT8183_POWER_DOMAIN_MFG_2D>;
+							mediatek,infracfg = <&infracfg>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8183_POWER_DOMAIN_DISP {
+					reg = <MT8183_POWER_DOMAIN_DISP>;
+					clocks = <&topckgen CLK_TOP_MUX_MM>,
+						 <&mmsys CLK_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_SMI_LARB0>,
+						 <&mmsys CLK_MM_SMI_LARB1>,
+						 <&mmsys CLK_MM_GALS_COMM0>,
+						 <&mmsys CLK_MM_GALS_COMM1>,
+						 <&mmsys CLK_MM_GALS_CCU2MM>,
+						 <&mmsys CLK_MM_GALS_IPU12MM>,
+						 <&mmsys CLK_MM_GALS_IMG2MM>,
+						 <&mmsys CLK_MM_GALS_CAM2MM>,
+						 <&mmsys CLK_MM_GALS_IPU2MM>;
+					clock-names = "mm", "mm-0", "mm-1", "mm-2", "mm-3",
+						      "mm-4", "mm-5", "mm-6", "mm-7",
+						      "mm-8", "mm-9";
+					mediatek,infracfg = <&infracfg>;
+					mediatek,smi = <&smi_common>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8183_POWER_DOMAIN_CAM {
+						reg = <MT8183_POWER_DOMAIN_CAM>;
+						clocks = <&topckgen CLK_TOP_MUX_CAM>,
+							 <&camsys CLK_CAM_LARB6>,
+							 <&camsys CLK_CAM_LARB3>,
+							 <&camsys CLK_CAM_SENINF>,
+							 <&camsys CLK_CAM_CAMSV0>,
+							 <&camsys CLK_CAM_CAMSV1>,
+							 <&camsys CLK_CAM_CAMSV2>,
+							 <&camsys CLK_CAM_CCU>;
+						clock-names = "cam", "cam-0", "cam-1",
+							      "cam-2", "cam-3", "cam-4",
+							      "cam-5", "cam-6";
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8183_POWER_DOMAIN_ISP {
+						reg = <MT8183_POWER_DOMAIN_ISP>;
+						clocks = <&topckgen CLK_TOP_MUX_IMG>,
+							 <&imgsys CLK_IMG_LARB5>,
+							 <&imgsys CLK_IMG_LARB2>;
+						clock-names = "isp", "isp-0", "isp-1";
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8183_POWER_DOMAIN_VDEC {
+						reg = <MT8183_POWER_DOMAIN_VDEC>;
+						mediatek,smi = <&smi_common>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8183_POWER_DOMAIN_VENC {
+						reg = <MT8183_POWER_DOMAIN_VENC>;
+						mediatek,smi = <&smi_common>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8183_POWER_DOMAIN_VPU_TOP {
+						reg = <MT8183_POWER_DOMAIN_VPU_TOP>;
+						clocks = <&topckgen CLK_TOP_MUX_IPU_IF>,
+							 <&topckgen CLK_TOP_MUX_DSP>,
+							 <&ipu_conn CLK_IPU_CONN_IPU>,
+							 <&ipu_conn CLK_IPU_CONN_AHB>,
+							 <&ipu_conn CLK_IPU_CONN_AXI>,
+							 <&ipu_conn CLK_IPU_CONN_ISP>,
+							 <&ipu_conn CLK_IPU_CONN_CAM_ADL>,
+							 <&ipu_conn CLK_IPU_CONN_IMG_ADL>;
+						clock-names = "vpu", "vpu1", "vpu-0", "vpu-1",
+							      "vpu-2", "vpu-3", "vpu-4", "vpu-5";
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8183_POWER_DOMAIN_VPU_CORE0 {
+							reg = <MT8183_POWER_DOMAIN_VPU_CORE0>;
+							clocks = <&topckgen CLK_TOP_MUX_DSP1>;
+							clock-names = "vpu2";
+							mediatek,infracfg = <&infracfg>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8183_POWER_DOMAIN_VPU_CORE1 {
+							reg = <MT8183_POWER_DOMAIN_VPU_CORE1>;
+							clocks = <&topckgen CLK_TOP_MUX_DSP2>;
+							clock-names = "vpu3";
+							mediatek,infracfg = <&infracfg>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8183-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8183-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8183-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MUX_PMICSPI>,
+				 <&infracfg CLK_INFRA_PMIC_AP>;
+			clock-names = "spi", "wrap";
+		};
+
+		keyboard: keyboard@10010000 {
+			compatible = "mediatek,mt6779-keypad";
+			reg = <0 0x10010000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8183-scp";
+			reg = <0 0x10500000 0 0x80000>,
+			      <0 0x105c0000 0 0x19080>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_SCPSYS>;
+			clock-names = "main";
+			memory-region = <&scp_mem_reserved>;
+			status = "disabled";
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8183-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk13m>;
+		};
+
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt8183-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>,
+					 <&larb4>, <&larb5>, <&larb6>;
+			#iommu-cells = <1>;
+		};
+
+		gce: mailbox@10238000 {
+			compatible = "mediatek,mt8183-gce";
+			reg = <0 0x10238000 0 0x4000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+		};
+
+		auxadc: auxadc@11001000 {
+			compatible = "mediatek,mt8183-auxadc",
+				     "mediatek,mt8173-auxadc";
+			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8183-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8183-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8183-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x1000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c6: i2c@11005000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11005000 0 0x1000>,
+			      <0 0x11000600 0 0x80>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C6>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11007000 0 0x1000>,
+			      <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C0>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11008000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11008000 0 0x1000>,
+			      <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C1>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C1_ARBITER>;
+			clock-names = "main", "dma","arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11009000 0 0x1000>,
+			      <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C2>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C2_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		svs: svs@1100b000 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
+		thermal: thermal@1100b000 {
+			#thermal-sensor-cells = <1>;
+			compatible = "mediatek,mt8183-thermal";
+			reg = <0 0x1100b000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_THERM>,
+				 <&infracfg CLK_INFRA_AUXADC>;
+			clock-names = "therm", "auxadc";
+			resets = <&infracfg  MT8183_INFRACFG_AO_THERM_SW_RST>;
+			interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>,
+					<&infracfg CLK_INFRA_DISP_PWM>;
+			clock-names = "main", "mm";
+		};
+
+		pwm1: pwm@11006000 {
+			compatible = "mediatek,mt8183-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&infracfg CLK_INFRA_PWM>,
+				 <&infracfg CLK_INFRA_PWM_HCLK>,
+				 <&infracfg CLK_INFRA_PWM1>,
+				 <&infracfg CLK_INFRA_PWM2>,
+				 <&infracfg CLK_INFRA_PWM3>,
+				 <&infracfg CLK_INFRA_PWM4>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4";
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x1100f000 0 0x1000>,
+			      <0 0x11000400 0 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C3>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		i2c1: i2c@11011000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11011000 0 0x1000>,
+			      <0 0x11000480 0 0x80>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C4>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		i2c9: i2c@11014000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11014000 0 0x1000>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C1_IMM>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C1_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c10: i2c@11015000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11015000 0 0x1000>,
+			      <0 0x11000300 0 0x80>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C2_IMM>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C2_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@11016000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11016000 0 0x1000>,
+			      <0 0x11000500 0 0x80>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C5>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C5_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c11: i2c@11017000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11017000 0 0x1000>,
+			      <0 0x11000580 0 0x80>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C5_IMM>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C5_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		i2c7: i2c@1101a000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x1101a000 0 0x1000>,
+			      <0 0x11000680 0 0x80>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C7>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@1101b000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x1101b000 0 0x1000>,
+			      <0 0x11000700 0 0x80>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C8>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11201000 {
+			compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+				 <&infracfg CLK_INFRA_USB>;
+			clock-names = "sys_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x420 101>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: usb@11200000 {
+				compatible = "mediatek,mt8183-xhci",
+					     "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+					 <&infracfg CLK_INFRA_USB>;
+				clock-names = "sys_ck", "ref_ck";
+				status = "disabled";
+			};
+		};
+
+		audiosys: audio-controller@11220000 {
+			compatible = "mediatek,mt8183-audiosys", "syscon";
+			reg = <0 0x11220000 0 0x1000>;
+			#clock-cells = <1>;
+			afe: mt8183-afe-pcm {
+				compatible = "mediatek,mt8183-audio";
+				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+				resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>;
+				reset-names = "audiosys";
+				power-domains =
+					<&spm MT8183_POWER_DOMAIN_AUDIO>;
+				clocks = <&audiosys CLK_AUDIO_AFE>,
+					 <&audiosys CLK_AUDIO_DAC>,
+					 <&audiosys CLK_AUDIO_DAC_PREDIS>,
+					 <&audiosys CLK_AUDIO_ADC>,
+					 <&audiosys CLK_AUDIO_PDN_ADDA6_ADC>,
+					 <&audiosys CLK_AUDIO_22M>,
+					 <&audiosys CLK_AUDIO_24M>,
+					 <&audiosys CLK_AUDIO_APLL_TUNER>,
+					 <&audiosys CLK_AUDIO_APLL2_TUNER>,
+					 <&audiosys CLK_AUDIO_I2S1>,
+					 <&audiosys CLK_AUDIO_I2S2>,
+					 <&audiosys CLK_AUDIO_I2S3>,
+					 <&audiosys CLK_AUDIO_I2S4>,
+					 <&audiosys CLK_AUDIO_TDM>,
+					 <&audiosys CLK_AUDIO_TML>,
+					 <&infracfg CLK_INFRA_AUDIO>,
+					 <&infracfg CLK_INFRA_AUDIO_26M_BCLK>,
+					 <&topckgen CLK_TOP_MUX_AUDIO>,
+					 <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+					 <&topckgen CLK_TOP_SYSPLL_D2_D4>,
+					 <&topckgen CLK_TOP_MUX_AUD_1>,
+					 <&topckgen CLK_TOP_APLL1_CK>,
+					 <&topckgen CLK_TOP_MUX_AUD_2>,
+					 <&topckgen CLK_TOP_APLL2_CK>,
+					 <&topckgen CLK_TOP_MUX_AUD_ENG1>,
+					 <&topckgen CLK_TOP_APLL1_D8>,
+					 <&topckgen CLK_TOP_MUX_AUD_ENG2>,
+					 <&topckgen CLK_TOP_APLL2_D8>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S0>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S1>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S2>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S3>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S4>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S5>,
+					 <&topckgen CLK_TOP_APLL12_DIV0>,
+					 <&topckgen CLK_TOP_APLL12_DIV1>,
+					 <&topckgen CLK_TOP_APLL12_DIV2>,
+					 <&topckgen CLK_TOP_APLL12_DIV3>,
+					 <&topckgen CLK_TOP_APLL12_DIV4>,
+					 <&topckgen CLK_TOP_APLL12_DIVB>,
+					 /*<&topckgen CLK_TOP_APLL12_DIV5>,*/
+					 <&clk26m>;
+				clock-names = "aud_afe_clk",
+						  "aud_dac_clk",
+						  "aud_dac_predis_clk",
+						  "aud_adc_clk",
+						  "aud_adc_adda6_clk",
+						  "aud_apll22m_clk",
+						  "aud_apll24m_clk",
+						  "aud_apll1_tuner_clk",
+						  "aud_apll2_tuner_clk",
+						  "aud_i2s1_bclk_sw",
+						  "aud_i2s2_bclk_sw",
+						  "aud_i2s3_bclk_sw",
+						  "aud_i2s4_bclk_sw",
+						  "aud_tdm_clk",
+						  "aud_tml_clk",
+						  "aud_infra_clk",
+						  "mtkaif_26m_clk",
+						  "top_mux_audio",
+						  "top_mux_aud_intbus",
+						  "top_syspll_d2_d4",
+						  "top_mux_aud_1",
+						  "top_apll1_ck",
+						  "top_mux_aud_2",
+						  "top_apll2_ck",
+						  "top_mux_aud_eng1",
+						  "top_apll1_d8",
+						  "top_mux_aud_eng2",
+						  "top_apll2_d8",
+						  "top_i2s0_m_sel",
+						  "top_i2s1_m_sel",
+						  "top_i2s2_m_sel",
+						  "top_i2s3_m_sel",
+						  "top_i2s4_m_sel",
+						  "top_i2s5_m_sel",
+						  "top_apll12_div0",
+						  "top_apll12_div1",
+						  "top_apll12_div2",
+						  "top_apll12_div3",
+						  "top_apll12_div4",
+						  "top_apll12_divb",
+						  /*"top_apll12_div5",*/
+						  "top_clk26m_clk";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>,
+				 <&infracfg CLK_INFRA_MSDC0>,
+				 <&infracfg CLK_INFRA_MSDC0_SCK>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11e10000 0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>,
+				 <&infracfg CLK_INFRA_MSDC1>,
+				 <&infracfg CLK_INFRA_MSDC1_SCK>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mipi_tx0: dsi-phy@11e50000 {
+			compatible = "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11e50000 0 0x1000>;
+			clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clock-output-names = "mipi_tx0_pll";
+			nvmem-cells = <&mipi_tx_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		efuse: efuse@11f10000 {
+			compatible = "mediatek,mt8183-efuse",
+				     "mediatek,efuse";
+			reg = <0 0x11f10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			thermal_calibration: calib@180 {
+				reg = <0x180 0xc>;
+			};
+
+			mipi_tx_calibration: calib@190 {
+				reg = <0x190 0xc>;
+			};
+
+			svs_calibration: calib@580 {
+				reg = <0x580 0x64>;
+			};
+		};
+
+		u3phy: t-phy@11f40000 {
+			compatible = "mediatek,mt8183-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11f40000 0x1000>;
+			status = "okay";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,discth = <15>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x0700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		mfgcfg: syscon@13000000 {
+			compatible = "mediatek,mt8183-mfgcfg", "syscon";
+			reg = <0 0x13000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8183b-mali", "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+			interrupts =
+				<GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 279 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
+
+			power-domains =
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE1>,
+				<&spm MT8183_POWER_DOMAIN_MFG_2D>;
+			power-domain-names = "core0", "core1", "core2";
+
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8183-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		dma-controller0@14001000 {
+			compatible = "mediatek,mt8183-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+					      <CMDQ_EVENT_MDP_RDMA0_EOF>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+				 <&mmsys CLK_MM_MDP_RSZ1>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
+				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+			#dma-cells = <1>;
+		};
+
+		mdp3-rsz0@14003000 {
+			compatible = "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>,
+					      <CMDQ_EVENT_MDP_RSZ0_EOF>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+		};
+
+		mdp3-rsz1@14004000 {
+			compatible = "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>,
+					      <CMDQ_EVENT_MDP_RSZ1_EOF>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+		};
+
+		dma-controller@14005000 {
+			compatible = "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14005000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+					      <CMDQ_EVENT_MDP_WROT0_EOF>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_WROT0>;
+			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			#dma-cells = <1>;
+		};
+
+		mdp3-wdma@14006000 {
+			compatible = "mediatek,mt8183-mdp3-wdma";
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>,
+					      <CMDQ_EVENT_MDP_WDMA0_EOF>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+			iommus = <&iommu M4U_PORT_MDP_WDMA0>;
+		};
+
+		ovl0: ovl@14008000 {
+			compatible = "mediatek,mt8183-disp-ovl";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+		};
+
+		ovl_2l0: ovl@14009000 {
+			compatible = "mediatek,mt8183-disp-ovl-2l";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+		};
+
+		ovl_2l1: ovl@1400a000 {
+			compatible = "mediatek,mt8183-disp-ovl-2l";
+			reg = <0 0x1400a000 0 0x1000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
+			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+		};
+
+		rdma0: rdma@1400b000 {
+			compatible = "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1400b000 0 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,rdma-fifo-size = <5120>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+		};
+
+		rdma1: rdma@1400c000 {
+			compatible = "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,rdma-fifo-size = <2048>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+		};
+
+		color0: color@1400e000 {
+			compatible = "mediatek,mt8183-disp-color",
+				     "mediatek,mt8173-disp-color";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+		};
+
+		ccorr0: ccorr@1400f000 {
+			compatible = "mediatek,mt8183-disp-ccorr";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
+		aal0: aal@14010000 {
+			compatible = "mediatek,mt8183-disp-aal";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+		};
+
+		gamma0: gamma@14011000 {
+			compatible = "mediatek,mt8183-disp-gamma";
+			reg = <0 0x14011000 0 0x1000>;
+			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+		};
+
+		dither0: dither@14012000 {
+			compatible = "mediatek,mt8183-disp-dither";
+			reg = <0 0x14012000 0 0x1000>;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+		};
+
+		dsi0: dsi@14014000 {
+			compatible = "mediatek,mt8183-dsi";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DSI0_MM>,
+				 <&mmsys CLK_MM_DSI0_IF>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+		};
+
+		mutex: mutex@14016000 {
+			compatible = "mediatek,mt8183-disp-mutex";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
+					      <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+		};
+
+		larb0: larb@14017000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x14017000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_SMI_LARB0>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clock-names = "apb", "smi";
+		};
+
+		smi_common: smi@14019000 {
+			compatible = "mediatek,mt8183-smi-common";
+			reg = <0 0x14019000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_GALS_COMM0>,
+				 <&mmsys CLK_MM_GALS_COMM1>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+		};
+
+		mdp3-ccorr@1401c000 {
+			compatible = "mediatek,mt8183-mdp3-ccorr";
+			reg = <0 0x1401c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>,
+					      <CMDQ_EVENT_MDP_CCORR_EOF>;
+			clocks = <&mmsys CLK_MM_MDP_CCORR>;
+		};
+
+		imgsys: syscon@15020000 {
+			compatible = "mediatek,mt8183-imgsys", "syscon";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb5: larb@15021000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x15021000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys CLK_IMG_LARB5>, <&imgsys CLK_IMG_LARB5>,
+				 <&mmsys CLK_MM_GALS_IMG2MM>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8183_POWER_DOMAIN_ISP>;
+		};
+
+		larb2: larb@1502f000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x1502f000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys CLK_IMG_LARB2>, <&imgsys CLK_IMG_LARB2>,
+				 <&mmsys CLK_MM_GALS_IPU2MM>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8183_POWER_DOMAIN_ISP>;
+		};
+
+		vdecsys: syscon@16000000 {
+			compatible = "mediatek,mt8183-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb1: larb@16010000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys CLK_VDEC_VDEC>, <&vdecsys CLK_VDEC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>;
+		};
+
+		vencsys: syscon@17000000 {
+			compatible = "mediatek,mt8183-vencsys", "syscon";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb4: larb@17010000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vencsys CLK_VENC_LARB>,
+				 <&vencsys CLK_VENC_LARB>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
+		};
+
+		venc_jpg: venc_jpg@17030000 {
+			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
+			reg = <0 0x17030000 0 0x1000>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
+				 <&iommu M4U_PORT_JPGENC_BSDMA>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_JPGENC>;
+			clock-names = "jpgenc";
+		};
+
+		ipu_conn: syscon@19000000 {
+			compatible = "mediatek,mt8183-ipu_conn", "syscon";
+			reg = <0 0x19000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipu_adl: syscon@19010000 {
+			compatible = "mediatek,mt8183-ipu_adl", "syscon";
+			reg = <0 0x19010000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipu_core0: syscon@19180000 {
+			compatible = "mediatek,mt8183-ipu_core0", "syscon";
+			reg = <0 0x19180000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipu_core1: syscon@19280000 {
+			compatible = "mediatek,mt8183-ipu_core1", "syscon";
+			reg = <0 0x19280000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: syscon@1a000000 {
+			compatible = "mediatek,mt8183-camsys", "syscon";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb6: larb@1a001000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x1a001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys CLK_CAM_LARB6>, <&camsys CLK_CAM_LARB6>,
+				 <&mmsys CLK_MM_GALS_CAM2MM>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8183_POWER_DOMAIN_CAM>;
+		};
+
+		larb3: larb@1a002000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x1a002000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys CLK_CAM_LARB3>, <&camsys CLK_CAM_LARB3>,
+				 <&mmsys CLK_MM_GALS_IPU12MM>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8183_POWER_DOMAIN_CAM>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <500>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <5000>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu1
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu2
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu3
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu4
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu5
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu6
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu7
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+
+		/* The tzts1 ~ tzts6 don't need to polling */
+		/* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+		tzts1: tzts1 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 1>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts2: tzts2 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 2>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts3: tzts3 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 3>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts4: tzts4 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 4>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts5: tzts5 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 5>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tztsABB: tztsABB {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 6>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
new file mode 100644
index 0000000000..2667a74242
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+
+/ {
+	model = "MediaTek MT8186 evaluation board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt8186-evb", "mediatek,mt8186";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <8000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <10000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+};
+
+&i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins>;
+};
+
+&i2c8 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8_pins>;
+};
+
+&i2c9 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c9_pins>;
+};
+
+&pio {
+	i2c0_pins: i2c0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
+				 <PINMUX_GPIO127__FUNC_SCL0>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
+				 <PINMUX_GPIO129__FUNC_SCL1>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
+				 <PINMUX_GPIO131__FUNC_SCL2>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c3_pins: i2c3-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
+				 <PINMUX_GPIO133__FUNC_SCL3>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c4_pins: i2c4-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
+				 <PINMUX_GPIO135__FUNC_SCL4>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
+				 <PINMUX_GPIO137__FUNC_SCL5>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c6_pins: i2c6-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO140__FUNC_SDA6>,
+				 <PINMUX_GPIO139__FUNC_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c7_pins: i2c7-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO142__FUNC_SDA7>,
+				 <PINMUX_GPIO141__FUNC_SCL7>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c8_pins: i2c8-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO144__FUNC_SDA8>,
+				 <PINMUX_GPIO143__FUNC_SCL8>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c9_pins: i2c9-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO146__FUNC_SDA9>,
+				 <PINMUX_GPIO145__FUNC_SCL9>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
new file mode 100644
index 0000000000..2fec6fd1c1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -0,0 +1,2098 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ * Author: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
+ */
+/dts-v1/;
+#include <dt-bindings/clock/mt8186-clk.h>
+#include <dt-bindings/gce/mt8186-gce.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8186-memory-port.h>
+#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+#include <dt-bindings/power/mt8186-power.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt8186-resets.h>
+
+/ {
+	compatible = "mediatek,mt8186";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ovl0 = &ovl0;
+		ovl-2l0 = &ovl_2l0;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
+	cci: cci {
+		compatible = "mediatek,mt8186-cci";
+		clocks = <&mcusys CLK_MCU_ARMPLL_BUS_SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cci", "intermediate";
+		operating-points-v2 = <&cci_opp>;
+	};
+
+	cci_opp: opp-table-cci {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cci_opp_0: opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <600000>;
+		};
+
+		cci_opp_1: opp-560000000 {
+			opp-hz = /bits/ 64 <560000000>;
+			opp-microvolt = <675000>;
+		};
+
+		cci_opp_2: opp-612000000 {
+			opp-hz = /bits/ 64 <612000000>;
+			opp-microvolt = <693750>;
+		};
+
+		cci_opp_3: opp-682000000 {
+			opp-hz = /bits/ 64 <682000000>;
+			opp-microvolt = <718750>;
+		};
+
+		cci_opp_4: opp-752000000 {
+			opp-hz = /bits/ 64 <752000000>;
+			opp-microvolt = <743750>;
+		};
+
+		cci_opp_5: opp-822000000 {
+			opp-hz = /bits/ 64 <822000000>;
+			opp-microvolt = <768750>;
+		};
+
+		cci_opp_6: opp-875000000 {
+			opp-hz = /bits/ 64 <875000000>;
+			opp-microvolt = <781250>;
+		};
+
+		cci_opp_7: opp-927000000 {
+			opp-hz = /bits/ 64 <927000000>;
+			opp-microvolt = <800000>;
+		};
+
+		cci_opp_8: opp-980000000 {
+			opp-hz = /bits/ 64 <980000000>;
+			opp-microvolt = <818750>;
+		};
+
+		cci_opp_9: opp-1050000000 {
+			opp-hz = /bits/ 64 <1050000000>;
+			opp-microvolt = <843750>;
+		};
+
+		cci_opp_10: opp-1120000000 {
+			opp-hz = /bits/ 64 <1120000000>;
+			opp-microvolt = <862500>;
+		};
+
+		cci_opp_11: opp-1155000000 {
+			opp-hz = /bits/ 64 <1155000000>;
+			opp-microvolt = <887500>;
+		};
+
+		cci_opp_12: opp-1190000000 {
+			opp-hz = /bits/ 64 <1190000000>;
+			opp-microvolt = <906250>;
+		};
+
+		cci_opp_13: opp-1260000000 {
+			opp-hz = /bits/ 64 <1260000000>;
+			opp-microvolt = <950000>;
+		};
+
+		cci_opp_14: opp-1330000000 {
+			opp-hz = /bits/ 64 <1330000000>;
+			opp-microvolt = <993750>;
+		};
+
+		cci_opp_15: opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1031250>;
+		};
+	};
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <600000>;
+			required-opps = <&cci_opp_0>;
+		};
+
+		opp-774000000 {
+			opp-hz = /bits/ 64 <774000000>;
+			opp-microvolt = <675000>;
+			required-opps = <&cci_opp_1>;
+		};
+
+		opp-875000000 {
+			opp-hz = /bits/ 64 <875000000>;
+			opp-microvolt = <700000>;
+			required-opps = <&cci_opp_2>;
+		};
+
+		opp-975000000 {
+			opp-hz = /bits/ 64 <975000000>;
+			opp-microvolt = <725000>;
+			required-opps = <&cci_opp_3>;
+		};
+
+		opp-1075000000 {
+			opp-hz = /bits/ 64 <1075000000>;
+			opp-microvolt = <750000>;
+			required-opps = <&cci_opp_4>;
+		};
+
+		opp-1175000000 {
+			opp-hz = /bits/ 64 <1175000000>;
+			opp-microvolt = <775000>;
+			required-opps = <&cci_opp_5>;
+		};
+
+		opp-1275000000 {
+			opp-hz = /bits/ 64 <1275000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&cci_opp_6>;
+		};
+
+		opp-1375000000 {
+			opp-hz = /bits/ 64 <1375000000>;
+			opp-microvolt = <825000>;
+			required-opps = <&cci_opp_7>;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <856250>;
+			required-opps = <&cci_opp_8>;
+		};
+
+		opp-1618000000 {
+			opp-hz = /bits/ 64 <1618000000>;
+			opp-microvolt = <875000>;
+			required-opps = <&cci_opp_9>;
+		};
+
+		opp-1666000000 {
+			opp-hz = /bits/ 64 <1666000000>;
+			opp-microvolt = <900000>;
+			required-opps = <&cci_opp_10>;
+		};
+
+		opp-1733000000 {
+			opp-hz = /bits/ 64 <1733000000>;
+			opp-microvolt = <925000>;
+			required-opps = <&cci_opp_11>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <950000>;
+			required-opps = <&cci_opp_12>;
+		};
+
+		opp-1866000000 {
+			opp-hz = /bits/ 64 <1866000000>;
+			opp-microvolt = <981250>;
+			required-opps = <&cci_opp_13>;
+		};
+
+		opp-1933000000 {
+			opp-hz = /bits/ 64 <1933000000>;
+			opp-microvolt = <1006250>;
+			required-opps = <&cci_opp_14>;
+		};
+
+		opp-2000000000 {
+			opp-hz = /bits/ 64 <2000000000>;
+			opp-microvolt = <1031250>;
+			required-opps = <&cci_opp_15>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-774000000 {
+			opp-hz = /bits/ 64 <774000000>;
+			opp-microvolt = <675000>;
+			required-opps = <&cci_opp_0>;
+		};
+
+		opp-835000000 {
+			opp-hz = /bits/ 64 <835000000>;
+			opp-microvolt = <693750>;
+			required-opps = <&cci_opp_1>;
+		};
+
+		opp-919000000 {
+			opp-hz = /bits/ 64 <919000000>;
+			opp-microvolt = <718750>;
+			required-opps = <&cci_opp_2>;
+		};
+
+		opp-1002000000 {
+			opp-hz = /bits/ 64 <1002000000>;
+			opp-microvolt = <743750>;
+			required-opps = <&cci_opp_3>;
+		};
+
+		opp-1085000000 {
+			opp-hz = /bits/ 64 <1085000000>;
+			opp-microvolt = <775000>;
+			required-opps = <&cci_opp_4>;
+		};
+
+		opp-1169000000 {
+			opp-hz = /bits/ 64 <1169000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&cci_opp_5>;
+		};
+
+		opp-1308000000 {
+			opp-hz = /bits/ 64 <1308000000>;
+			opp-microvolt = <843750>;
+			required-opps = <&cci_opp_6>;
+		};
+
+		opp-1419000000 {
+			opp-hz = /bits/ 64 <1419000000>;
+			opp-microvolt = <875000>;
+			required-opps = <&cci_opp_7>;
+		};
+
+		opp-1530000000 {
+			opp-hz = /bits/ 64 <1530000000>;
+			opp-microvolt = <912500>;
+			required-opps = <&cci_opp_8>;
+		};
+
+		opp-1670000000 {
+			opp-hz = /bits/ 64 <1670000000>;
+			opp-microvolt = <956250>;
+			required-opps = <&cci_opp_9>;
+		};
+
+		opp-1733000000 {
+			opp-hz = /bits/ 64 <1733000000>;
+			opp-microvolt = <981250>;
+			required-opps = <&cci_opp_10>;
+		};
+
+		opp-1796000000 {
+			opp-hz = /bits/ 64 <1796000000>;
+			opp-microvolt = <1012500>;
+			required-opps = <&cci_opp_11>;
+		};
+
+		opp-1860000000 {
+			opp-hz = /bits/ 64 <1860000000>;
+			opp-microvolt = <1037500>;
+			required-opps = <&cci_opp_12>;
+		};
+
+		opp-1923000000 {
+			opp-hz = /bits/ 64 <1923000000>;
+			opp-microvolt = <1062500>;
+			required-opps = <&cci_opp_13>;
+		};
+
+		cluster1_opp_14: opp-1986000000 {
+			opp-hz = /bits/ 64 <1986000000>;
+			opp-microvolt = <1093750>;
+			required-opps = <&cci_opp_14>;
+		};
+
+		cluster1_opp_15: opp-2050000000 {
+			opp-hz = /bits/ 64 <2050000000>;
+			opp-microvolt = <1118750>;
+			required-opps = <&cci_opp_15>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2050000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <335>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2050000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <335>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_ret_l: cpu-retention-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <100>;
+				min-residency-us = <1600>;
+			};
+
+			cpu_ret_b: cpu-retention-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <100>;
+				min-residency-us = <1400>;
+			};
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010001>;
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <250>;
+				min-residency-us = <2100>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010001>;
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <250>;
+				min-residency-us = <1900>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-299000000 {
+			opp-hz = /bits/ 64 <299000000>;
+			opp-microvolt = <612500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-332000000 {
+			opp-hz = /bits/ 64 <332000000>;
+			opp-microvolt = <625000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-366000000 {
+			opp-hz = /bits/ 64 <366000000>;
+			opp-microvolt = <637500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <643750>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-434000000 {
+			opp-hz = /bits/ 64 <434000000>;
+			opp-microvolt = <656250>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-484000000 {
+			opp-hz = /bits/ 64 <484000000>;
+			opp-microvolt = <668750>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-535000000 {
+			opp-hz = /bits/ 64 <535000000>;
+			opp-microvolt = <687500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-586000000 {
+			opp-hz = /bits/ 64 <586000000>;
+			opp-microvolt = <700000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-637000000 {
+			opp-hz = /bits/ 64 <637000000>;
+			opp-microvolt = <712500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-690000000 {
+			opp-hz = /bits/ 64 <690000000>;
+			opp-microvolt = <737500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-743000000 {
+			opp-hz = /bits/ 64 <743000000>;
+			opp-microvolt = <756250>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-796000000 {
+			opp-hz = /bits/ 64 <796000000>;
+			opp-microvolt = <781250>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <800000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-900000000-3 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x8>;
+		};
+
+		opp-900000000-4 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <837500>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-900000000-5 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <825000>;
+			opp-supported-hw = <0x30>;
+		};
+
+		opp-950000000-3 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <900000>;
+			opp-supported-hw = <0x8>;
+		};
+
+		opp-950000000-4 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <875000>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-950000000-5 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x30>;
+		};
+
+		opp-1000000000-3 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0x8>;
+		};
+
+		opp-1000000000-4 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <912500>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-1000000000-5 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <875000>;
+			opp-supported-hw = <0x30>;
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		mcusys: syscon@c53a000 {
+			compatible = "mediatek,mt8186-mcusys", "syscon";
+			reg = <0 0xc53a000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8186-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8186-infracfg_ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8186-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8186-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x10002000 0 0x0200>,
+			      <0 0x10002200 0 0x0200>,
+			      <0 0x10002400 0 0x0200>,
+			      <0 0x10002600 0 0x0200>,
+			      <0 0x10002a00 0 0x0200>,
+			      <0 0x10002c00 0 0x0200>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_lt", "iocfg_lm", "iocfg_lb",
+				    "iocfg_bl", "iocfg_rb", "iocfg_rt", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 185>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8186-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8186-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				mfg0: power-domain@MT8186_POWER_DOMAIN_MFG0 {
+					reg = <MT8186_POWER_DOMAIN_MFG0>;
+					clocks = <&topckgen CLK_TOP_MFG>;
+					clock-names = "mfg00";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg1: power-domain@MT8186_POWER_DOMAIN_MFG1 {
+						reg = <MT8186_POWER_DOMAIN_MFG1>;
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_MFG2 {
+							reg = <MT8186_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8186_POWER_DOMAIN_MFG3 {
+							reg = <MT8186_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_CSIRX_TOP {
+					reg = <MT8186_POWER_DOMAIN_CSIRX_TOP>;
+					clocks = <&topckgen CLK_TOP_SENINF>,
+						 <&topckgen CLK_TOP_SENINF1>;
+					clock-names = "subsys-csirx-top0",
+						      "subsys-csirx-top1";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_SSUSB {
+					reg = <MT8186_POWER_DOMAIN_SSUSB>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 {
+					reg = <MT8186_POWER_DOMAIN_SSUSB_P1>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_ADSP_AO {
+					reg = <MT8186_POWER_DOMAIN_ADSP_AO>;
+					clocks = <&topckgen CLK_TOP_AUDIODSP>,
+						 <&topckgen CLK_TOP_ADSP_BUS>;
+					clock-names = "audioadsp",
+						      "subsys-adsp-bus";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8186_POWER_DOMAIN_ADSP_INFRA {
+						reg = <MT8186_POWER_DOMAIN_ADSP_INFRA>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_ADSP_TOP {
+							reg = <MT8186_POWER_DOMAIN_ADSP_TOP>;
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_CONN_ON {
+					reg = <MT8186_POWER_DOMAIN_CONN_ON>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_DIS {
+					reg = <MT8186_POWER_DOMAIN_DIS>;
+					clocks = <&topckgen CLK_TOP_DISP>,
+						 <&topckgen CLK_TOP_MDP>,
+						 <&mmsys CLK_MM_SMI_INFRA>,
+						 <&mmsys CLK_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_SMI_GALS>,
+						 <&mmsys CLK_MM_SMI_IOMMU>;
+					clock-names = "disp", "mdp",
+						      "subsys-smi-infra",
+						      "subsys-smi-common",
+						      "subsys-smi-gals",
+						      "subsys-smi-iommu";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8186_POWER_DOMAIN_VDEC {
+						reg = <MT8186_POWER_DOMAIN_VDEC>;
+						clocks = <&topckgen CLK_TOP_VDEC>,
+							 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+						clock-names = "vdec0", "larb";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_CAM {
+						reg = <MT8186_POWER_DOMAIN_CAM>;
+						clocks = <&topckgen CLK_TOP_SENINF>,
+							 <&topckgen CLK_TOP_SENINF1>,
+							 <&topckgen CLK_TOP_SENINF2>,
+							 <&topckgen CLK_TOP_SENINF3>,
+							 <&camsys CLK_CAM2MM_GALS>,
+							 <&topckgen CLK_TOP_CAMTM>,
+							 <&topckgen CLK_TOP_CAM>;
+						clock-names = "cam0", "cam1", "cam2",
+							      "cam3", "gals",
+							      "subsys-cam-tm",
+							      "subsys-cam-top";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_CAM_RAWB {
+							reg = <MT8186_POWER_DOMAIN_CAM_RAWB>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8186_POWER_DOMAIN_CAM_RAWA {
+							reg = <MT8186_POWER_DOMAIN_CAM_RAWA>;
+							#power-domain-cells = <0>;
+						};
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_IMG {
+						reg = <MT8186_POWER_DOMAIN_IMG>;
+						clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>,
+							 <&topckgen CLK_TOP_IMG1>;
+						clock-names = "gals", "subsys-img-top";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_IMG2 {
+							reg = <MT8186_POWER_DOMAIN_IMG2>;
+							#power-domain-cells = <0>;
+						};
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_IPE {
+						reg = <MT8186_POWER_DOMAIN_IPE>;
+						clocks = <&topckgen CLK_TOP_IPE>,
+							 <&ipesys CLK_IPE_LARB19>,
+							 <&ipesys CLK_IPE_LARB20>,
+							 <&ipesys CLK_IPE_SMI_SUBCOM>,
+							 <&ipesys CLK_IPE_GALS_IPE>;
+						clock-names = "subsys-ipe-top",
+							      "subsys-ipe-larb0",
+							      "subsys-ipe-larb1",
+							      "subsys-ipe-smi",
+							      "subsys-ipe-gals";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_VENC {
+						reg = <MT8186_POWER_DOMAIN_VENC>;
+						clocks = <&topckgen CLK_TOP_VENC>,
+							 <&vencsys CLK_VENC_CKE1_VENC>;
+						clock-names = "venc0", "larb";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_WPE {
+						reg = <MT8186_POWER_DOMAIN_WPE>;
+						clocks = <&topckgen CLK_TOP_WPE>,
+							 <&wpesys CLK_WPE_SMI_LARB8_CK_EN>,
+							 <&wpesys CLK_WPE_SMI_LARB8_PCLK_EN>;
+						clock-names = "wpe0",
+							      "subsys-larb-ck",
+							      "subsys-larb-pclk";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8186-wdt";
+			mediatek,disable-extrst;
+			reg = <0 0x10007000 0 0x1000>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8186-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8186-pwrap", "syscon";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		spmi: spmi@10015000 {
+			compatible = "mediatek,mt8186-spmi", "mediatek,mt8195-spmi";
+			reg = <0 0x10015000 0 0x000e00>, <0 0x1001B000 0 0x000100>;
+			reg-names = "pmif", "spmimst";
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_MST>;
+			clock-names = "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux";
+			assigned-clocks = <&topckgen CLK_TOP_SPMI_MST>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8186-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		gce: mailbox@1022c000 {
+			compatible = "mediatek,mt8186-gce";
+			reg = <0 0X1022c000 0 0x4000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+			clock-names = "gce";
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8186-scp";
+			reg = <0 0x10500000 0 0x40000>,
+			      <0 0x105c0000 0 0x19080>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp: adsp@10680000 {
+			compatible = "mediatek,mt8186-dsp";
+			reg = <0 0x10680000 0 0x2000>, <0 0x10800000 0 0x100000>,
+			      <0 0x1068b000 0 0x100>, <0 0x1068f000 0 0x1000>;
+			reg-names = "cfg", "sram", "sec", "bus";
+			clocks = <&topckgen CLK_TOP_AUDIODSP>, <&topckgen CLK_TOP_ADSP_BUS>;
+			clock-names = "audiodsp", "adsp_bus";
+			assigned-clocks = <&topckgen CLK_TOP_AUDIODSP>,
+					  <&topckgen CLK_TOP_ADSP_BUS>;
+			assigned-clock-parents = <&clk26m>, <&topckgen CLK_TOP_MAINPLL_D2_D2>;
+			mbox-names = "rx", "tx";
+			mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_ADSP_TOP>;
+			status = "disabled";
+		};
+
+		adsp_mailbox0: mailbox@10686100 {
+			compatible = "mediatek,mt8186-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10686100 0 0x1000>;
+			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_mailbox1: mailbox@10687100 {
+			compatible = "mediatek,mt8186-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10687100 0 0x1000>;
+			interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		nor_flash: spi@11000000 {
+			compatible = "mediatek,mt8186-nor";
+			reg = <0 0x11000000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&infracfg_ao CLK_INFRA_AO_SPINOR>,
+				 <&infracfg_ao CLK_INFRA_AO_FLASHIF_133M>,
+				 <&infracfg_ao CLK_INFRA_AO_FLASHIF_66M>;
+			clock-names = "spi", "sf", "axi", "axi_s";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3_D8>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		auxadc: adc@11001000 {
+			compatible = "mediatek,mt8186-auxadc", "mediatek,mt8173-auxadc";
+			reg = <0 0x11001000 0 0x1000>;
+			#io-channel-cells = <1>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8186-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8186-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11007000 0 0x1000>,
+			      <0 0x10200100 0 0x100>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11008000 0 0x1000>,
+			      <0 0x10200200 0 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11009000 0 0x1000>,
+			      <0 0x10200300 0 0x180>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x1100f000 0 0x1000>,
+			      <0 0x10200480 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11011000 0 0x1000>,
+			      <0 0x10200580 0 0x180>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@11016000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11016000 0 0x1000>,
+			      <0 0x10200700 0 0x100>;
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@1100d000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x1100d000 0 0x1000>,
+			      <0 0x10200800 0 0x100>;
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@11004000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11004000 0 0x1000>,
+			      <0 0x10200900 0 0x180>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C7>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@11005000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11005000 0 0x1000>,
+			      <0 0x10200A80 0 0x180>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C8>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8186-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11014000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11014000 0 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11015000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11015000 0 0x1000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		imp_iic_wrap: clock-controller@11017000 {
+			compatible = "mediatek,mt8186-imp_iic_wrap";
+			reg = <0 0x11017000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		uart2: serial@11018000 {
+			compatible = "mediatek,mt8186-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c9: i2c@11019000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11019000 0 0x1000>,
+			      <0 0x10200c00 0 0x180>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C9>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		afe: audio-controller@11210000 {
+			compatible = "mediatek,mt8186-sound";
+			reg = <0 0x11210000 0 0x2000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUDIO>,
+				 <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_BCLK>,
+				 <&topckgen CLK_TOP_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_INTBUS>,
+				 <&topckgen CLK_TOP_MAINPLL_D2_D4>,
+				 <&topckgen CLK_TOP_AUD_1>,
+				 <&apmixedsys CLK_APMIXED_APLL1>,
+				 <&topckgen CLK_TOP_AUD_2>,
+				 <&apmixedsys CLK_APMIXED_APLL2>,
+				 <&topckgen CLK_TOP_AUD_ENGEN1>,
+				 <&topckgen CLK_TOP_APLL1_D8>,
+				 <&topckgen CLK_TOP_AUD_ENGEN2>,
+				 <&topckgen CLK_TOP_APLL2_D8>,
+				 <&topckgen CLK_TOP_APLL_I2S0_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S1_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S2_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S4_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_TDMOUT_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV0>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV1>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV2>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV4>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV_TDMOUT_M>,
+				 <&topckgen CLK_TOP_AUDIO_H>,
+				 <&clk26m>;
+			clock-names = "aud_infra_clk",
+				      "mtkaif_26m_clk",
+				      "top_mux_audio",
+				      "top_mux_audio_int",
+				      "top_mainpll_d2_d4",
+				      "top_mux_aud_1",
+				      "top_apll1_ck",
+				      "top_mux_aud_2",
+				      "top_apll2_ck",
+				      "top_mux_aud_eng1",
+				      "top_apll1_d8",
+				      "top_mux_aud_eng2",
+				      "top_apll2_d8",
+				      "top_i2s0_m_sel",
+				      "top_i2s1_m_sel",
+				      "top_i2s2_m_sel",
+				      "top_i2s4_m_sel",
+				      "top_tdm_m_sel",
+				      "top_apll12_div0",
+				      "top_apll12_div1",
+				      "top_apll12_div2",
+				      "top_apll12_div4",
+				      "top_apll12_div_tdm",
+				      "top_mux_audio_h",
+				      "top_clk26m_clk";
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			mediatek,infracfg = <&infracfg_ao>;
+			mediatek,topckgen = <&topckgen>;
+			resets = <&watchdog MT8186_TOPRGU_AUDIO_SW_RST>;
+			reset-names = "audiosys";
+			status = "disabled";
+		};
+
+		ssusb0: usb@11201000 {
+			compatible = "mediatek,mt8186-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			clocks = <&topckgen CLK_TOP_USB_TOP>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
+				 <&infracfg_ao CLK_INFRA_AO_ICUSB>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host0: usb@11200000 {
+				compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				clocks = <&topckgen CLK_TOP_USB_TOP>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
+					 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+				interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
+				mediatek,syscon-wakeup = <&pericfg 0x420 2>;
+				wakeup-source;
+				status = "disabled";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8186-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11cd0000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDCFDE>;
+			clock-names = "source", "hclk", "source_cg", "crypto";
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_MSDC50_0>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_MSDCPLL>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8186-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c90000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		ssusb1: usb@11281000 {
+			compatible = "mediatek,mt8186-mtu3", "mediatek,mtu3";
+			reg = <0 0x11281000 0 0x2dff>, <0 0x11283e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
+				 <&clk26m>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host1: usb@11280000 {
+				compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11280000 0 0x1000>;
+				reg-names = "mac";
+				clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
+					 <&clk26m>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck";
+				interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
+				mediatek,syscon-wakeup = <&pericfg 0x424 2>;
+				wakeup-source;
+				status = "disabled";
+			};
+		};
+
+		u3phy0: t-phy@11c80000 {
+			compatible = "mediatek,mt8186-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11c80000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11ca0000 {
+			compatible = "mediatek,mt8186-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11ca0000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,discth = <0x8>;
+			};
+		};
+
+		efuse: efuse@11cb0000 {
+			compatible = "mediatek,mt8186-efuse", "mediatek,efuse";
+			reg = <0 0x11cb0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speedbin: gpu-speedbin@59c {
+				reg = <0x59c 0x4>;
+				bits = <0 3>;
+			};
+		};
+
+		mipi_tx0: dsi-phy@11cc0000 {
+			compatible = "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11cc0000 0 0x1000>;
+			clocks = <&clk26m>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clock-output-names = "mipi_tx0_pll";
+			status = "disabled";
+		};
+
+		mfgsys: clock-controller@13000000 {
+			compatible = "mediatek,mt8186-mfgsys";
+			reg = <0 0x13000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8186-mali",
+				     "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+
+			clocks = <&mfgsys CLK_MFG_BG3D>;
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			power-domains = <&spm MT8186_POWER_DOMAIN_MFG2>,
+					<&spm MT8186_POWER_DOMAIN_MFG3>;
+			power-domain-names = "core0", "core1";
+			#cooling-cells = <2>;
+			nvmem-cells = <&gpu_speedbin>;
+			nvmem-cell-names = "speed-bin";
+			operating-points-v2 = <&gpu_opp_table>;
+			dynamic-power-coefficient = <4687>;
+			status = "disabled";
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8186-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		mutex: mutex@14001000 {
+			compatible = "mediatek,mt8186-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
+					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		smi_common: smi@14002000 {
+			compatible = "mediatek,mt8186-smi-common";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_GALS>, <&mmsys CLK_MM_SMI_GALS>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		larb0: smi@14003000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x14003000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <0>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		larb1: smi@14004000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x14004000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <1>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ovl0: ovl@14005000 {
+			compatible = "mediatek,mt8186-disp-ovl", "mediatek,mt8192-disp-ovl";
+			reg = <0 0x14005000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L0_OVL_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ovl_2l0: ovl@14006000 {
+			compatible = "mediatek,mt8186-disp-ovl-2l", "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14006000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_OVL_2L_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		rdma0: rdma@14007000 {
+			compatible = "mediatek,mt8186-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		color: color@14009000 {
+			compatible = "mediatek,mt8186-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x14009000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dpi: dpi@1400a000 {
+			compatible = "mediatek,mt8186-dpi";
+			reg = <0 0x1400a000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_DPI>,
+				 <&mmsys CLK_MM_DISP_DPI>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			assigned-clocks = <&topckgen CLK_TOP_DPI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_TVDPLL_D2>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_LOW 0>;
+			status = "disabled";
+
+			port {
+				dpi_out: endpoint { };
+			};
+		};
+
+		ccorr: ccorr@1400b000 {
+			compatible = "mediatek,mt8186-disp-ccorr", "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		aal: aal@1400c000 {
+			compatible = "mediatek,mt8186-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x1400c000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		gamma: gamma@1400d000 {
+			compatible = "mediatek,mt8186-disp-gamma", "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1400d000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		postmask: postmask@1400e000 {
+			compatible = "mediatek,mt8186-disp-postmask",
+				     "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1400e000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dither: dither@1400f000 {
+			compatible = "mediatek,mt8186-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x1400f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dsi0: dsi@14013000 {
+			compatible = "mediatek,mt8186-dsi";
+			reg = <0 0x14013000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI0_DSI_CK_DOMAIN>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+			resets = <&mmsys MT8186_MMSYS_SW0_RST_B_DISP_DSI0>;
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+
+			port {
+				dsi_out: endpoint { };
+			};
+		};
+
+		iommu_mm: iommu@14016000 {
+			compatible = "mediatek,mt8186-iommu-mm";
+			reg = <0 0x14016000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_IOMMU>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,larbs = <&larb0 &larb1 &larb2 &larb4
+					  &larb7 &larb8 &larb9 &larb11
+					  &larb13 &larb14 &larb16 &larb17
+					  &larb19 &larb20>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+			#iommu-cells = <1>;
+		};
+
+		rdma1: rdma@1401f000 {
+			compatible = "mediatek,mt8186-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1401f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xf000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		wpesys: clock-controller@14020000 {
+			compatible = "mediatek,mt8186-wpesys";
+			reg = <0 0x14020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb8: smi@14023000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x14023000 0 0x1000>;
+			clocks = <&wpesys CLK_WPE_SMI_LARB8_CK_EN>,
+				 <&wpesys CLK_WPE_SMI_LARB8_CK_EN>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <8>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_WPE>;
+		};
+
+		imgsys1: clock-controller@15020000 {
+			compatible = "mediatek,mt8186-imgsys1";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb9: smi@1502e000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1502e000 0 0x1000>;
+			clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>,
+				 <&imgsys1 CLK_IMG1_LARB9_IMG1>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <9>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IMG>;
+		};
+
+		imgsys2: clock-controller@15820000 {
+			compatible = "mediatek,mt8186-imgsys2";
+			reg = <0 0x15820000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb11: smi@1582e000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1582e000 0 0x1000>;
+			clocks = <&imgsys1 CLK_IMG1_LARB9_IMG1>,
+				 <&imgsys2 CLK_IMG2_LARB9_IMG2>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <11>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IMG2>;
+		};
+
+		larb4: smi@1602e000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1602e000 0 0x1000>;
+			clocks = <&vdecsys CLK_VDEC_LARB1_CKEN>,
+				 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <4>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VDEC>;
+		};
+
+		vdecsys: clock-controller@1602f000 {
+			compatible = "mediatek,mt8186-vdecsys";
+			reg = <0 0x1602f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@17000000 {
+			compatible = "mediatek,mt8186-vencsys";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb7: smi@17010000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			clocks = <&vencsys CLK_VENC_CKE1_VENC>,
+				 <&vencsys CLK_VENC_CKE1_VENC>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <7>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+		};
+
+		camsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8186-camsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb13: smi@1a001000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a001000 0 0x1000>;
+			clocks = <&camsys CLK_CAM2MM_GALS>, <&camsys CLK_CAM_LARB13>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <13>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM>;
+		};
+
+		larb14: smi@1a002000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a002000 0 0x1000>;
+			clocks = <&camsys CLK_CAM2MM_GALS>, <&camsys CLK_CAM_LARB14>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <14>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM>;
+		};
+
+		larb16: smi@1a00f000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a00f000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB14>,
+				 <&camsys_rawa CLK_CAM_RAWA_LARBX_RAWA>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <16>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb17: smi@1a010000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+				 <&camsys_rawb CLK_CAM_RAWB_LARBX_RAWB>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <17>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		camsys_rawa: clock-controller@1a04f000 {
+			compatible = "mediatek,mt8186-camsys_rawa";
+			reg = <0 0x1a04f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1a06f000 {
+			compatible = "mediatek,mt8186-camsys_rawb";
+			reg = <0 0x1a06f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mdpsys: clock-controller@1b000000 {
+			compatible = "mediatek,mt8186-mdpsys";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: smi@1b002000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1b002000 0 0x1000>;
+			clocks = <&mdpsys CLK_MDP_SMI0>, <&mdpsys CLK_MDP_SMI0>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <2>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ipesys: clock-controller@1c000000 {
+			compatible = "mediatek,mt8186-ipesys";
+			reg = <0 0x1c000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb20: smi@1c00f000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1c00f000 0 0x1000>;
+			clocks = <&ipesys CLK_IPE_LARB20>, <&ipesys CLK_IPE_LARB20>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <20>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IPE>;
+		};
+
+		larb19: smi@1c10f000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1c10f000 0 0x1000>;
+			clocks = <&ipesys CLK_IPE_LARB19>, <&ipesys CLK_IPE_LARB19>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <19>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IPE>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi
new file mode 100644
index 0000000000..f521f50d44
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ */
+
+#include "mt8192-asurada-audio-rt5682.dtsi"
+#include "mt8192-asurada-audio-rt1015p.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682";
+
+	speaker-codecs {
+		sound-dai = <&rt1015p>;
+	};
+
+	headset-codec {
+		sound-dai = <&rt5682 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi
new file mode 100644
index 0000000000..e574378993
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+
+/ {
+	rt1015p: audio-codec {
+		compatible = "realtek,rt1015p";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt1015p_pins>;
+		sdb-gpios = <&pio 147 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&pio {
+	rt1015p_pins: rt1015p-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO147__FUNC_GPIO147>;
+			output-low;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi
new file mode 100644
index 0000000000..05e48b870a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+
+&i2c1 {
+	rt5682: audio-codec@1a {
+		compatible = "realtek,rt5682i";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 18 IRQ_TYPE_LEVEL_LOW>;
+		realtek,jd-src = <1>;
+		realtek,btndet-delay = <16>;
+		#sound-dai-cells = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_g>;
+		VBAT-supply = <&pp3300_ldo_z>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
new file mode 100644
index 0000000000..6e23428a3e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ */
+/dts-v1/;
+#include "mt8192-asurada.dtsi"
+#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi"
+
+/ {
+	model = "Google Hayato rev1";
+	compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_FORWARD)
+		MATRIX_KEY(0x02, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x01, 0x02, KEY_FULL_SCREEN)
+		MATRIX_KEY(0x03, 0x04, KEY_SCALE)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&pio {
+	bt_pins: bt-pins {
+		pins-bt-kill {
+			pinmux = <PINMUX_GPIO144__FUNC_GPIO144>;
+			output-low;
+		};
+
+		pins-bt-wake {
+			pinmux = <PINMUX_GPIO22__FUNC_GPIO22>;
+			bias-pull-up;
+		};
+
+		pins-ap-wake-bt {
+			pinmux = <PINMUX_GPIO168__FUNC_GPIO168>;
+			output-low;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO94__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO95__FUNC_UTXD1>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO166__FUNC_UCTS1>;
+			input-enable;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO167__FUNC_URTS1>;
+		};
+	};
+
+	uart1_pins_sleep: uart1-sleep-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO95__FUNC_UTXD1>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO166__FUNC_UCTS1>;
+			input-enable;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO167__FUNC_URTS1>;
+		};
+	};
+};
+
+&touchscreen {
+	compatible = "hid-over-i2c";
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+	vdd-supply = <&pp3300_u>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-1 = <&uart1_pins_sleep>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+			      <&pio 94 IRQ_TYPE_EDGE_FALLING>;
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+
+		enable-gpios = <&pio 144 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&pio 168 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&pio 22 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
new file mode 100644
index 0000000000..c6ad10cec9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+/dts-v1/;
+#include "mt8192-asurada.dtsi"
+#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Google Spherion (rev0 - 3)";
+	compatible = "google,spherion-rev3", "google,spherion-rev2",
+		     "google,spherion-rev1", "google,spherion-rev0",
+		     "google,spherion", "mediatek,mt8192";
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		led {
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+&cros_ec_pwm {
+	status = "okay";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_FULL_SCREEN)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&touchscreen {
+	compatible = "elan,ekth3500";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
new file mode 100644
index 0000000000..0e8b341170
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -0,0 +1,1450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8192.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c7 = &i2c7;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+		enable-gpios = <&pio 152 0>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	pp1000_dpbrdg: regulator-1v0-dpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_dpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1000_dpbrdg_en_pins>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 19 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vs2_buck_reg>;
+	};
+
+	pp1000_mipibrdg: regulator-1v0-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1000_mipibrdg_en_pins>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vs2_buck_reg>;
+	};
+
+	pp1800_dpbrdg: regulator-1v8-dpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_dpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_dpbrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 126 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vio18_ldo_reg>;
+	};
+
+	/* system wide LDO 1.8V power rail */
+	pp1800_ldo_g: regulator-1v8-g {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_ldo_g";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pp3300_g>;
+	};
+
+	pp1800_mipibrdg: regulator-1v8-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_mipibrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 128 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vio18_ldo_reg>;
+	};
+
+	pp3300_dpbrdg: regulator-3v3-dpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_dpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_dpbrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 26 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_g>;
+	};
+
+	/* system wide switching 3.3V power rail */
+	pp3300_g: regulator-3v3-g {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_g";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide LDO 3.3V power rail */
+	pp3300_ldo_z: regulator-3v3-z {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ldo_z";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_mipibrdg: regulator-3v3-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_mipibrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_g>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_u: regulator-3v3-u {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_u";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* enable pin wired to GPIO controlled by EC */
+		vin-supply = <&pp3300_g>;
+	};
+
+	pp3300_wlan: regulator-3v3-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wlan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_wlan_pins>;
+		enable-active-high;
+		gpio = <&pio 143 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	pp5000_a: regulator-5v0-a {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_a";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-var-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: scp@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		wifi_restricted_dma_region: wifi@c0000000 {
+			compatible = "restricted-dma-pool";
+			reg = <0 0xc0000000 0 0x4000000>;
+		};
+	};
+
+	sound: sound {
+		mediatek,platform = <&afe>;
+		pinctrl-names = "aud_clk_mosi_off",
+				"aud_clk_mosi_on",
+				"aud_dat_mosi_off",
+				"aud_dat_mosi_on",
+				"aud_dat_miso_off",
+				"aud_dat_miso_on",
+				"vow_dat_miso_off",
+				"vow_dat_miso_on",
+				"vow_clk_miso_off",
+				"vow_clk_miso_on",
+				"aud_nle_mosi_off",
+				"aud_nle_mosi_on",
+				"aud_dat_miso2_off",
+				"aud_dat_miso2_on",
+				"aud_gpio_i2s3_off",
+				"aud_gpio_i2s3_on",
+				"aud_gpio_i2s8_off",
+				"aud_gpio_i2s8_on",
+				"aud_gpio_i2s9_off",
+				"aud_gpio_i2s9_on",
+				"aud_dat_mosi_ch34_off",
+				"aud_dat_mosi_ch34_on",
+				"aud_dat_miso_ch34_off",
+				"aud_dat_miso_ch34_on",
+				"aud_gpio_tdm_off",
+				"aud_gpio_tdm_on";
+		pinctrl-0 = <&aud_clk_mosi_off_pins>;
+		pinctrl-1 = <&aud_clk_mosi_on_pins>;
+		pinctrl-2 = <&aud_dat_mosi_off_pins>;
+		pinctrl-3 = <&aud_dat_mosi_on_pins>;
+		pinctrl-4 = <&aud_dat_miso_off_pins>;
+		pinctrl-5 = <&aud_dat_miso_on_pins>;
+		pinctrl-6 = <&vow_dat_miso_off_pins>;
+		pinctrl-7 = <&vow_dat_miso_on_pins>;
+		pinctrl-8 = <&vow_clk_miso_off_pins>;
+		pinctrl-9 = <&vow_clk_miso_on_pins>;
+		pinctrl-10 = <&aud_nle_mosi_off_pins>;
+		pinctrl-11 = <&aud_nle_mosi_on_pins>;
+		pinctrl-12 = <&aud_dat_miso2_off_pins>;
+		pinctrl-13 = <&aud_dat_miso2_on_pins>;
+		pinctrl-14 = <&aud_gpio_i2s3_off_pins>;
+		pinctrl-15 = <&aud_gpio_i2s3_on_pins>;
+		pinctrl-16 = <&aud_gpio_i2s8_off_pins>;
+		pinctrl-17 = <&aud_gpio_i2s8_on_pins>;
+		pinctrl-18 = <&aud_gpio_i2s9_off_pins>;
+		pinctrl-19 = <&aud_gpio_i2s9_on_pins>;
+		pinctrl-20 = <&aud_dat_mosi_ch34_off_pins>;
+		pinctrl-21 = <&aud_dat_mosi_ch34_on_pins>;
+		pinctrl-22 = <&aud_dat_miso_ch34_off_pins>;
+		pinctrl-23 = <&aud_dat_miso_ch34_on_pins>;
+		pinctrl-24 = <&aud_gpio_tdm_off_pins>;
+		pinctrl-25 = <&aud_gpio_tdm_on_pins>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	touchscreen: touchscreen@10 {
+		reg = <0x10>;
+		interrupts-extended = <&pio 21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	clock-stretch-ns = <12600>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+		vcc-supply = <&pp3300_u>;
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 41 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_mipibrdg>;
+		vdd18-supply = <&pp1800_mipibrdg>;
+		vdd33-supply = <&pp3300_mipibrdg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_mipibrdg>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins>;
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	mmc-hs400-enhanced-strobe;
+	hs400-ds-delay = <0x12814>;
+	no-sdio;
+	no-sd;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cd-gpios = <&pio 17 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mt6360_ldo5_reg>;
+	vqmmc-supply = <&mt6360_ldo3_reg>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-sdio;
+	no-mmc;
+};
+
+/* for CORE */
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_sshub_buck_reg {
+	regulator-always-on;
+	regulator-min-microvolt = <575000>;
+	regulator-max-microvolt = <575000>;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6315_7_vbuck1>;
+	regulator-coupled-max-spread = <10000>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+	mediatek,mic-type-0 = <2>; /* DMIC */
+	mediatek,mic-type-2 = <2>; /* DMIC */
+};
+
+&nor_flash {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_flash_pins>;
+	assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6_D8>;
+
+	flash@0 {
+		compatible = "winbond,w25q64jwm", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+
+	pcie0: pcie@0,0 {
+		device_type = "pci";
+		reg = <0x0000 0 0 0 0>;
+		num-lanes = <1>;
+		bus-range = <0x1 0x1>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi: wifi@0,0 {
+			reg = <0x10000 0 0 0 0x100000>,
+			      <0x10000 0 0x100000 0 0x100000>;
+			memory-region = <&wifi_restricted_dma_region>;
+		};
+	};
+};
+
+&pio {
+	/* 220 lines */
+	gpio-line-names = "I2S_DP_LRCK",
+			  "IS_DP_BCLK",
+			  "I2S_DP_MCLK",
+			  "I2S_DP_DATAOUT",
+			  "SAR0_INT_ODL",
+			  "EC_AP_INT_ODL",
+			  "EDPBRDG_INT_ODL",
+			  "DPBRDG_INT_ODL",
+			  "DPBRDG_PWREN",
+			  "DPBRDG_RST_ODL",
+			  "I2S_HP_MCLK",
+			  "I2S_HP_BCK",
+			  "I2S_HP_LRCK",
+			  "I2S_HP_DATAIN",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it AP_FLASH_WP_ODL.
+			   */
+			  "AP_FLASH_WP_L",
+			  "TRACKPAD_INT_ODL",
+			  "EC_AP_HPD_OD",
+			  "SD_CD_ODL",
+			  "HP_INT_ODL_ALC",
+			  "EN_PP1000_DPBRDG",
+			  "AP_GPIO20",
+			  "TOUCH_INT_L_1V8",
+			  "UART_BT_WAKE_ODL",
+			  "AP_GPIO23",
+			  "AP_SPI_FLASH_CS_L",
+			  "AP_SPI_FLASH_CLK",
+			  "EN_PP3300_DPBRDG_DX",
+			  "AP_SPI_FLASH_MOSI",
+			  "AP_SPI_FLASH_MISO",
+			  "I2S_HP_DATAOUT",
+			  "AP_GPIO30",
+			  "I2S_SPKR_MCLK",
+			  "I2S_SPKR_BCLK",
+			  "I2S_SPKR_LRCK",
+			  "I2S_SPKR_DATAIN",
+			  "I2S_SPKR_DATAOUT",
+			  "AP_SPI_H1_TPM_CLK",
+			  "AP_SPI_H1_TPM_CS_L",
+			  "AP_SPI_H1_TPM_MISO",
+			  "AP_SPI_H1_TPM_MOSI",
+			  "BL_PWM",
+			  "EDPBRDG_PWREN",
+			  "EDPBRDG_RST_ODL",
+			  "EN_PP3300_HUB",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SD_CLK",
+			  "SD_CMD",
+			  "SD_DATA3",
+			  "SD_DATA0",
+			  "SD_DATA2",
+			  "SD_DATA1",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "PCIE_WAKE_ODL",
+			  "PCIE_RST_L",
+			  "PCIE_CLKREQ_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPMI_SCL",
+			  "SPMI_SDA",
+			  "AP_GOOD",
+			  "UART_DBG_TX_AP_RX",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_AP_TX_BT_RX",
+			  "UART_BT_TX_AP_RX",
+			  "MIPI_DPI_D0_R",
+			  "MIPI_DPI_D1_R",
+			  "MIPI_DPI_D2_R",
+			  "MIPI_DPI_D3_R",
+			  "MIPI_DPI_D4_R",
+			  "MIPI_DPI_D5_R",
+			  "MIPI_DPI_D6_R",
+			  "MIPI_DPI_D7_R",
+			  "MIPI_DPI_D8_R",
+			  "MIPI_DPI_D9_R",
+			  "MIPI_DPI_D10_R",
+			  "",
+			  "",
+			  "MIPI_DPI_DE_R",
+			  "MIPI_DPI_D11_R",
+			  "MIPI_DPI_VSYNC_R",
+			  "MIPI_DPI_CLK_R",
+			  "MIPI_DPI_HSYNC_R",
+			  "PCM_BT_DATAIN",
+			  "PCM_BT_SYNC",
+			  "PCM_BT_DATAOUT",
+			  "PCM_BT_CLK",
+			  "AP_I2C_AUDIO_SCL",
+			  "AP_I2C_AUDIO_SDA",
+			  "SCP_I2C_SCL",
+			  "SCP_I2C_SDA",
+			  "AP_I2C_WLAN_SCL",
+			  "AP_I2C_WLAN_SDA",
+			  "AP_I2C_DPBRDG_SCL",
+			  "AP_I2C_DPBRDG_SDA",
+			  "EN_PP1800_DPBRDG_DX",
+			  "EN_PP3300_EDP_DX",
+			  "EN_PP1800_EDPBRDG_DX",
+			  "EN_PP1000_EDPBRDG",
+			  "SCP_JTAG0_TDO",
+			  "SCP_JTAG0_TDI",
+			  "SCP_JTAG0_TMS",
+			  "SCP_JTAG0_TCK",
+			  "SCP_JTAG0_TRSTN",
+			  "EN_PP3000_VMC_PMU",
+			  "EN_PP3300_DISPLAY_DX",
+			  "TOUCH_RST_L_1V8",
+			  "TOUCH_REPORT_DISABLE",
+			  "",
+			  "",
+			  "AP_I2C_TRACKPAD_SCL_1V8",
+			  "AP_I2C_TRACKPAD_SDA_1V8",
+			  "EN_PP3300_WLAN",
+			  "BT_KILL_L",
+			  "WIFI_KILL_L",
+			  "SET_VMC_VOLT_AT_1V8",
+			  "EN_SPK",
+			  "AP_WARM_RST_REQ",
+			  "",
+			  "",
+			  "EN_PP3000_SD_S3",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "",
+			  "AP_SPI_EC_CLK",
+			  "AP_SPI_EC_CS_L",
+			  "AP_SPI_EC_MISO",
+			  "AP_SPI_EC_MOSI",
+			  "AP_I2C_EDPBRDG_SCL",
+			  "AP_I2C_EDPBRDG_SDA",
+			  "MT6315_PROC_INT",
+			  "MT6315_GPU_INT",
+			  "UART_SERVO_TX_SCP_RX",
+			  "UART_SCP_TX_SERVO_RX",
+			  "BT_RTS_AP_CTS",
+			  "AP_RTS_BT_CTS",
+			  "UART_AP_WAKE_BT_ODL",
+			  "WLAN_ALERT_ODL",
+			  "EC_IN_RW_ODL",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MSDC0_CMD",
+			  "MSDC0_DAT0",
+			  "MSDC0_DAT2",
+			  "MSDC0_DAT4",
+			  "MSDC0_DAT6",
+			  "MSDC0_DAT1",
+			  "MSDC0_DAT5",
+			  "MSDC0_DAT7",
+			  "MSDC0_DSL",
+			  "MSDC0_CLK",
+			  "MSDC0_DAT3",
+			  "MSDC0_RST_L",
+			  "SCP_VREQ_VAO",
+			  "AUD_DAT_MOSI2",
+			  "AUD_NLE_MOSI1",
+			  "AUD_NLE_MOSI0",
+			  "AUD_DAT_MISO2",
+			  "AP_I2C_SAR_SDA",
+			  "AP_I2C_SAR_SCL",
+			  "AP_I2C_PWR_SCL",
+			  "AP_I2C_PWR_SDA",
+			  "AP_I2C_TS_SCL_1V8",
+			  "AP_I2C_TS_SDA_1V8",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "AP_EC_WATCHDOG_L",
+			  "PWRAP_SPI0_MI",
+			  "PWRAP_SPI0_CSN",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_CK",
+			  "AP_RTC_CLK32K",
+			  "AUD_CLK_MOSI",
+			  "AUD_SYNC_MOSI",
+			  "AUD_DAT_MOSI0",
+			  "AUD_DAT_MOSI1",
+			  "AUD_DAT_MISO0",
+			  "AUD_DAT_MISO1";
+
+	anx7625_pins: anx7625-default-pins {
+		pins-out {
+			pinmux = <PINMUX_GPIO41__FUNC_GPIO41>,
+				 <PINMUX_GPIO42__FUNC_GPIO42>;
+			output-low;
+		};
+
+		pins-in {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	aud_clk_mosi_off_pins: aud-clk-mosi-off-pins {
+		pins-mosi-off {
+			pinmux = <PINMUX_GPIO214__FUNC_GPIO214>,
+				 <PINMUX_GPIO215__FUNC_GPIO215>;
+		};
+	};
+
+	aud_clk_mosi_on_pins: aud-clk-mosi-on-pins {
+		pins-mosi-on {
+			pinmux = <PINMUX_GPIO214__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI>;
+			drive-strength = <10>;
+		};
+	};
+
+	aud_dat_miso_ch34_off_pins: aud-dat-miso-ch34-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
+		};
+	};
+
+	aud_dat_miso_ch34_on_pins: aud-dat-miso-ch34-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	aud_dat_miso_off_pins: aud-dat-miso-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>,
+				 <PINMUX_GPIO219__FUNC_GPIO219>;
+		};
+	};
+
+	aud_dat_miso_on_pins: aud-dat-miso-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO218__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO219__FUNC_AUD_DAT_MISO1>;
+			drive-strength = <10>;
+		};
+	};
+
+	aud_dat_miso2_off_pins: aud-dat-miso2-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
+		};
+	};
+
+	aud_dat_miso2_on_pins: aud-dat-miso2-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	aud_dat_mosi_ch34_off_pins: aud-dat-mosi-ch34-off-pins {
+		pins-mosi-off {
+			pinmux = <PINMUX_GPIO196__FUNC_GPIO196>;
+		};
+	};
+
+	aud_dat_mosi_ch34_on_pins: aud-dat-mosi-ch34-on-pins {
+		pins-mosi-on {
+			pinmux = <PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2>;
+		};
+	};
+
+	aud_dat_mosi_off_pins: aud-dat-mosi-off-pins {
+		pins-mosi-off {
+			pinmux = <PINMUX_GPIO216__FUNC_GPIO216>,
+				 <PINMUX_GPIO217__FUNC_GPIO217>;
+		};
+	};
+
+	aud_dat_mosi_on_pins: aud-dat-mosi-on-pins {
+		pins-mosi-on {
+			pinmux = <PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1>;
+			drive-strength = <10>;
+		};
+	};
+
+	aud_gpio_i2s3_off_pins: aud-gpio-i2s3-off-pins {
+		pins-i2s3-off {
+			pinmux = <PINMUX_GPIO32__FUNC_GPIO32>,
+				 <PINMUX_GPIO33__FUNC_GPIO33>,
+				 <PINMUX_GPIO35__FUNC_GPIO35>;
+		};
+	};
+
+	aud_gpio_i2s3_on_pins: aud-gpio-i2s3-on-pins {
+		pins-i2s3-on {
+			pinmux = <PINMUX_GPIO32__FUNC_I2S3_BCK>,
+				 <PINMUX_GPIO33__FUNC_I2S3_LRCK>,
+				 <PINMUX_GPIO35__FUNC_I2S3_DO>;
+		};
+	};
+
+	aud_gpio_i2s8_off_pins: aud-gpio-i2s8-off-pins {
+		pins-i2s8-off {
+			pinmux = <PINMUX_GPIO10__FUNC_GPIO10>,
+				 <PINMUX_GPIO11__FUNC_GPIO11>,
+				 <PINMUX_GPIO12__FUNC_GPIO12>,
+				 <PINMUX_GPIO13__FUNC_GPIO13>;
+		};
+	};
+
+	aud_gpio_i2s8_on_pins: aud-gpio-i2s8-on-pins {
+		pins-i2s8-on {
+			pinmux = <PINMUX_GPIO10__FUNC_I2S8_MCK>,
+				 <PINMUX_GPIO11__FUNC_I2S8_BCK>,
+				 <PINMUX_GPIO12__FUNC_I2S8_LRCK>,
+				 <PINMUX_GPIO13__FUNC_I2S8_DI>;
+		};
+	};
+
+	aud_gpio_i2s9_off_pins: aud-gpio-i2s9-off-pins {
+		pins-i2s9-off {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+		};
+	};
+
+	aud_gpio_i2s9_on_pins: aud-gpio-i2s9-on-pins {
+		pins-i2s9-on {
+			pinmux = <PINMUX_GPIO29__FUNC_I2S9_DO>;
+		};
+	};
+
+	aud_gpio_tdm_off_pins: aud-gpio-tdm-off-pins {
+		pins-tdm-off {
+			pinmux = <PINMUX_GPIO0__FUNC_GPIO0>,
+				 <PINMUX_GPIO1__FUNC_GPIO1>,
+				 <PINMUX_GPIO2__FUNC_GPIO2>,
+				 <PINMUX_GPIO3__FUNC_GPIO3>;
+		};
+	};
+
+	aud_gpio_tdm_on_pins: aud-gpio-tdm-on-pins {
+		pins-tdm-on {
+			pinmux = <PINMUX_GPIO0__FUNC_TDM_LRCK>,
+				 <PINMUX_GPIO1__FUNC_TDM_BCK>,
+				 <PINMUX_GPIO2__FUNC_TDM_MCK>,
+				 <PINMUX_GPIO3__FUNC_TDM_DATA0>;
+		};
+	};
+
+	aud_nle_mosi_off_pins: aud-nle-mosi-off-pins {
+		pins-nle-mosi-off {
+			pinmux = <PINMUX_GPIO197__FUNC_GPIO197>,
+				 <PINMUX_GPIO198__FUNC_GPIO198>;
+		};
+	};
+
+	aud_nle_mosi_on_pins: aud-nle-mosi-on-pins {
+		pins-nle-mosi-on {
+			pinmux = <PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1>,
+				 <PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0>;
+		};
+	};
+
+	cr50_int: cr50-irq-default-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO171__FUNC_GPIO171>;
+			input-enable;
+		};
+	};
+
+	cros_ec_int: cros-ec-irq-default-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	i2c0_pins: i2c0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
+				 <PINMUX_GPIO205__FUNC_SDA0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO118__FUNC_SCL1>,
+				 <PINMUX_GPIO119__FUNC_SDA1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO141__FUNC_SCL2>,
+				 <PINMUX_GPIO142__FUNC_SDA2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c3_pins: i2c3-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO160__FUNC_SCL3>,
+				 <PINMUX_GPIO161__FUNC_SDA3>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c7_pins: i2c7-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO124__FUNC_SCL7>,
+				 <PINMUX_GPIO125__FUNC_SDA7>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <10>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
+			drive-strength = <10>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO191__FUNC_MSDC0_DSL>;
+			drive-strength = <10>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-insert {
+			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nor_flash_pins: nor-flash-default-pins {
+		pins-cs-io1 {
+			pinmux = <PINMUX_GPIO24__FUNC_SPINOR_CS>,
+				 <PINMUX_GPIO28__FUNC_SPINOR_IO1>;
+			input-enable;
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pins-io0 {
+			pinmux = <PINMUX_GPIO27__FUNC_SPINOR_IO0>;
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO25__FUNC_SPINOR_CK>;
+			input-enable;
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	pcie_pins: pcie-default-pins {
+		pins-pcie-wake {
+			pinmux = <PINMUX_GPIO63__FUNC_PCIE_WAKE_N>;
+			bias-pull-up;
+		};
+
+		pins-pcie-pereset {
+			pinmux = <PINMUX_GPIO64__FUNC_PCIE_PERESET_N>;
+		};
+
+		pins-pcie-clkreq {
+			pinmux = <PINMUX_GPIO65__FUNC_PCIE_CLKREQ_N>;
+			bias-pull-up;
+		};
+
+		pins-wifi-kill {
+			pinmux = <PINMUX_GPIO145__FUNC_GPIO145>; /* WIFI_KILL_L */
+			output-high;
+		};
+	};
+
+	pp1000_dpbrdg_en_pins: pp1000-dpbrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO19__FUNC_GPIO19>;
+			output-low;
+		};
+	};
+
+	pp1000_mipibrdg_en_pins: pp1000-mipibrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			output-low;
+		};
+	};
+
+	pp1800_dpbrdg_en_pins: pp1800-dpbrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO126__FUNC_GPIO126>;
+			output-low;
+		};
+	};
+
+	pp1800_mipibrdg_en_pins: pp1800-mipibrd-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO128__FUNC_GPIO128>;
+			output-low;
+		};
+	};
+
+	pp3300_dpbrdg_en_pins: pp3300-dpbrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO26__FUNC_GPIO26>;
+			output-low;
+		};
+	};
+
+	pp3300_mipibrdg_en_pins: pp3300-mipibrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO127__FUNC_GPIO127>;
+			output-low;
+		};
+	};
+
+	pp3300_wlan_pins: pp3300-wlan-pins {
+		pins-pcie-en-pp3300-wlan {
+			pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
+			output-high;
+		};
+	};
+
+	pwm0_pins: pwm0-default-pins {
+		pins-pwm {
+			pinmux = <PINMUX_GPIO40__FUNC_DISP_PWM>;
+		};
+
+		pins-inhibit {
+			pinmux = <PINMUX_GPIO152__FUNC_GPIO152>;
+			output-high;
+		};
+	};
+
+	scp_pins: scp-pins {
+		pins-vreq-vao {
+			pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+				 <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+				 <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+			bias-pull-down;
+		};
+	};
+
+	spi5_pins: spi5-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>,
+				 <PINMUX_GPIO37__FUNC_GPIO37>,
+				 <PINMUX_GPIO39__FUNC_SPI5_A_MO>,
+				 <PINMUX_GPIO36__FUNC_SPI5_A_CLK>;
+			bias-disable;
+		};
+	};
+
+	trackpad_pins: trackpad-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+
+	touchscreen_pins: touchscreen-default-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO137__FUNC_GPIO137>;
+			output-high;
+		};
+
+		pins-report-sw {
+			pinmux = <PINMUX_GPIO138__FUNC_GPIO138>;
+			output-low;
+		};
+	};
+
+	vow_clk_miso_off_pins: vow-clk-miso-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO219__FUNC_GPIO219>;
+		};
+	};
+
+	vow_clk_miso_on_pins: vow-clk-miso-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO219__FUNC_VOW_CLK_MISO>;
+		};
+	};
+
+	vow_dat_miso_off_pins: vow-dat-miso-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>;
+		};
+	};
+
+	vow_dat_miso_on_pins: vow-dat-miso-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO218__FUNC_VOW_DAT_MISO>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pwm0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+};
+
+&scp {
+	status = "okay";
+
+	firmware-name = "mediatek/mt8192/scp.img";
+	memory-region = <&scp_mem_reserved>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+
+	cros-ec {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	mediatek,pad-select = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cros_ec_int>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		base_detection: cbas {
+			compatible = "google,cros-cbas";
+		};
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+
+			status = "disabled";
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mt6360_ldo3_reg: regulator@0 {
+			compatible = "google,cros-ec-regulator";
+			reg = <0>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		mt6360_ldo5_reg: regulator@1 {
+			compatible = "google,cros-ec-regulator";
+			reg = <1>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+&spi5 {
+	status = "okay";
+
+	cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>;
+	mediatek,pad-select = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi5_pins>;
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cr50_int>;
+	};
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+
+			mt6315_6_vbuck3: vbuck3 {
+				regulator-compatible = "vbuck3";
+				regulator-name = "Vlcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <606250>;
+				regulator-max-microvolt = <800000>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+				regulator-coupled-max-spread = <10000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+
+	wakeup-source;
+	vusb33-supply = <&pp3300_g>;
+	vbus-supply = <&pp5000_a>;
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
new file mode 100644
index 0000000000..808be492e9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8192.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	model = "MediaTek MT8192 evaluation board";
+	compatible = "mediatek,mt8192-evb", "mediatek,mt8192";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
new file mode 100644
index 0000000000..69f4cded5d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -0,0 +1,1902 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mt8192-clk.h>
+#include <dt-bindings/gce/mt8192-gce.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8192-larb-port.h>
+#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt8192-power.h>
+#include <dt-bindings/reset/mt8192-resets.h>
+
+/ {
+	compatible = "mediatek,mt8192";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ovl0 = &ovl0;
+		ovl-2l0 = &ovl_2l0;
+		ovl-2l2 = &ovl_2l2;
+		rdma0 = &rdma0;
+		rdma4 = &rdma4;
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <1701000000>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <1701000000>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <1701000000>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <1701000000>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2171000000>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2171000000>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2171000000>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2171000000>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+				core4 {
+					cpu = <&cpu4>;
+				};
+				core5 {
+					cpu = <&cpu5>;
+				};
+				core6 {
+					cpu = <&cpu6>;
+				};
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+			cpu_ret_l: cpu-retention-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <140>;
+				min-residency-us = <780>;
+			};
+			cpu_ret_b: cpu-retention-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <35>;
+				exit-latency-us = <145>;
+				min-residency-us = <720>;
+			};
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010002>;
+				local-timer-stop;
+				entry-latency-us = <60>;
+				exit-latency-us = <155>;
+				min-residency-us = <860>;
+			};
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010002>;
+				local-timer-stop;
+				entry-latency-us = <40>;
+				exit-latency-us = <155>;
+				min-residency-us = <780>;
+			};
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clock-frequency = <13000000>;
+	};
+
+	gpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			opp-microvolt = <606250>;
+		};
+
+		opp-399000000 {
+			opp-hz = /bits/ 64 <399000000>;
+			opp-microvolt = <618750>;
+		};
+
+		opp-440000000 {
+			opp-hz = /bits/ 64 <440000000>;
+			opp-microvolt = <631250>;
+		};
+
+		opp-482000000 {
+			opp-hz = /bits/ 64 <482000000>;
+			opp-microvolt = <643750>;
+		};
+
+		opp-523000000 {
+			opp-hz = /bits/ 64 <523000000>;
+			opp-microvolt = <656250>;
+		};
+
+		opp-564000000 {
+			opp-hz = /bits/ 64 <564000000>;
+			opp-microvolt = <668750>;
+		};
+
+		opp-605000000 {
+			opp-hz = /bits/ 64 <605000000>;
+			opp-microvolt = <681250>;
+		};
+
+		opp-647000000 {
+			opp-hz = /bits/ 64 <647000000>;
+			opp-microvolt = <693750>;
+		};
+
+		opp-688000000 {
+			opp-hz = /bits/ 64 <688000000>;
+			opp-microvolt = <706250>;
+		};
+
+		opp-724000000 {
+			opp-hz = /bits/ 64 <724000000>;
+			opp-microvolt = <725000>;
+		};
+
+		opp-748000000 {
+			opp-hz = /bits/ 64 <748000000>;
+			opp-microvolt = <737500>;
+		};
+
+		opp-772000000 {
+			opp-hz = /bits/ 64 <772000000>;
+			opp-microvolt = <750000>;
+		};
+
+		opp-795000000 {
+			opp-hz = /bits/ 64 <795000000>;
+			opp-microvolt = <762500>;
+		};
+
+		opp-819000000 {
+			opp-hz = /bits/ 64 <819000000>;
+			opp-microvolt = <775000>;
+		};
+
+		opp-843000000 {
+			opp-hz = /bits/ 64 <843000000>;
+			opp-microvolt = <787500>;
+		};
+
+		opp-866000000 {
+			opp-hz = /bits/ 64 <866000000>;
+			opp-microvolt = <800000>;
+		};
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
+		ranges;
+
+		performance: performance-controller@11bc10 {
+			compatible = "mediatek,cpufreq-hw";
+			reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+			#performance-domain-cells = <1>;
+		};
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8192-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8192-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8192-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8192-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c20000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>,
+			      <0 0x11d30000 0 0x1000>,
+			      <0 0x11d40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e70000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x11f20000 0 0x1000>,
+			      <0 0x11f30000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+				    "iocfg_bl", "iocfg_br", "iocfg_lm",
+				    "iocfg_lb", "iocfg_rt", "iocfg_lt",
+				    "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 220>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8192-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8192-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				power-domain@MT8192_POWER_DOMAIN_AUDIO {
+					reg = <MT8192_POWER_DOMAIN_AUDIO>;
+					clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+						 <&infracfg CLK_INFRA_AUDIO_26M_B>,
+						 <&infracfg CLK_INFRA_AUDIO>;
+					clock-names = "audio", "audio1", "audio2";
+					mediatek,infracfg = <&infracfg>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8192_POWER_DOMAIN_CONN {
+					reg = <MT8192_POWER_DOMAIN_CONN>;
+					clocks = <&infracfg CLK_INFRA_PMIC_CONN>;
+					clock-names = "conn";
+					mediatek,infracfg = <&infracfg>;
+					#power-domain-cells = <0>;
+				};
+
+				mfg0: power-domain@MT8192_POWER_DOMAIN_MFG0 {
+					reg = <MT8192_POWER_DOMAIN_MFG0>;
+					clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>,
+						 <&topckgen CLK_TOP_MFG_REF_SEL>;
+					clock-names = "mfg", "alt";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg1: power-domain@MT8192_POWER_DOMAIN_MFG1 {
+						reg = <MT8192_POWER_DOMAIN_MFG1>;
+						mediatek,infracfg = <&infracfg>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8192_POWER_DOMAIN_MFG2 {
+							reg = <MT8192_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG3 {
+							reg = <MT8192_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG4 {
+							reg = <MT8192_POWER_DOMAIN_MFG4>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG5 {
+							reg = <MT8192_POWER_DOMAIN_MFG5>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG6 {
+							reg = <MT8192_POWER_DOMAIN_MFG6>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8192_POWER_DOMAIN_DISP {
+					reg = <MT8192_POWER_DOMAIN_DISP>;
+					clocks = <&topckgen CLK_TOP_DISP_SEL>,
+						 <&mmsys CLK_MM_SMI_INFRA>,
+						 <&mmsys CLK_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_SMI_GALS>,
+						 <&mmsys CLK_MM_SMI_IOMMU>;
+					clock-names = "disp", "disp-0", "disp-1", "disp-2",
+						      "disp-3";
+					mediatek,infracfg = <&infracfg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8192_POWER_DOMAIN_IPE {
+						reg = <MT8192_POWER_DOMAIN_IPE>;
+						clocks = <&topckgen CLK_TOP_IPE_SEL>,
+							 <&ipesys CLK_IPE_LARB19>,
+							 <&ipesys CLK_IPE_LARB20>,
+							 <&ipesys CLK_IPE_SMI_SUBCOM>,
+							 <&ipesys CLK_IPE_GALS>;
+						clock-names = "ipe", "ipe-0", "ipe-1", "ipe-2",
+							      "ipe-3";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_ISP {
+						reg = <MT8192_POWER_DOMAIN_ISP>;
+						clocks = <&topckgen CLK_TOP_IMG1_SEL>,
+							 <&imgsys CLK_IMG_LARB9>,
+							 <&imgsys CLK_IMG_GALS>;
+						clock-names = "isp", "isp-0", "isp-1";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_ISP2 {
+						reg = <MT8192_POWER_DOMAIN_ISP2>;
+						clocks = <&topckgen CLK_TOP_IMG2_SEL>,
+							 <&imgsys2 CLK_IMG2_LARB11>,
+							 <&imgsys2 CLK_IMG2_GALS>;
+						clock-names = "isp2", "isp2-0", "isp2-1";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_MDP {
+						reg = <MT8192_POWER_DOMAIN_MDP>;
+						clocks = <&topckgen CLK_TOP_MDP_SEL>,
+							 <&mdpsys CLK_MDP_SMI0>;
+						clock-names = "mdp", "mdp-0";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_VENC {
+						reg = <MT8192_POWER_DOMAIN_VENC>;
+						clocks = <&topckgen CLK_TOP_VENC_SEL>,
+							 <&vencsys CLK_VENC_SET1_VENC>;
+						clock-names = "venc", "venc-0";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_VDEC {
+						reg = <MT8192_POWER_DOMAIN_VDEC>;
+						clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+							 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+							 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+							 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+						clock-names = "vdec", "vdec-0", "vdec-1", "vdec-2";
+						mediatek,infracfg = <&infracfg>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8192_POWER_DOMAIN_VDEC2 {
+							reg = <MT8192_POWER_DOMAIN_VDEC2>;
+							clocks = <&vdecsys CLK_VDEC_VDEC>,
+								 <&vdecsys CLK_VDEC_LAT>,
+								 <&vdecsys CLK_VDEC_LARB1>;
+							clock-names = "vdec2-0", "vdec2-1",
+								      "vdec2-2";
+							#power-domain-cells = <0>;
+						};
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_CAM {
+						reg = <MT8192_POWER_DOMAIN_CAM>;
+						clocks = <&topckgen CLK_TOP_CAM_SEL>,
+							 <&camsys CLK_CAM_LARB13>,
+							 <&camsys CLK_CAM_LARB14>,
+							 <&camsys CLK_CAM_CCU_GALS>,
+							 <&camsys CLK_CAM_CAM2MM_GALS>;
+						clock-names = "cam", "cam-0", "cam-1", "cam-2",
+							      "cam-3";
+						mediatek,infracfg = <&infracfg>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8192_POWER_DOMAIN_CAM_RAWA {
+							reg = <MT8192_POWER_DOMAIN_CAM_RAWA>;
+							clocks = <&camsys_rawa CLK_CAM_RAWA_LARBX>;
+							clock-names = "cam_rawa-0";
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_CAM_RAWB {
+							reg = <MT8192_POWER_DOMAIN_CAM_RAWB>;
+							clocks = <&camsys_rawb CLK_CAM_RAWB_LARBX>;
+							clock-names = "cam_rawb-0";
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_CAM_RAWC {
+							reg = <MT8192_POWER_DOMAIN_CAM_RAWC>;
+							clocks = <&camsys_rawc CLK_CAM_RAWC_LARBX>;
+							clock-names = "cam_rawc-0";
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8192-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8192-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8192-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10026000 {
+			compatible = "mediatek,mt6873-pwrap";
+			reg = <0 0x10026000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+				 <&infracfg CLK_INFRA_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+			assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+		};
+
+		spmi: spmi@10027000 {
+			compatible = "mediatek,mt6873-spmi";
+			reg = <0 0x10027000 0 0x000e00>,
+			      <0 0x10029000 0 0x000100>;
+			reg-names = "pmif", "spmimst";
+			clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+				 <&infracfg CLK_INFRA_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_MST_SEL>;
+			clock-names = "pmif_sys_ck",
+				      "pmif_tmr_ck",
+				      "spmimst_clk_mux";
+			assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+		};
+
+		gce: mailbox@10228000 {
+			compatible = "mediatek,mt8192-gce";
+			reg = <0 0x10228000 0 0x4000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+		};
+
+		scp_adsp: clock-controller@10720000 {
+			compatible = "mediatek,mt8192-scp_adsp";
+			reg = <0 0x10720000 0 0x1000>;
+			#clock-cells = <1>;
+			/* power domain dependency not upstreamed */
+			status = "fail";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8192-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8192-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		imp_iic_wrap_c: clock-controller@11007000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_c";
+			reg = <0 0x11007000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi6: spi@1101d000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1101d000 0 0x1000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI6>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi7: spi@1101e000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1101e000 0 0x1000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI7>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8192-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>,
+			      <0 0x10700000 0 0x8000>;
+			reg-names = "sram", "cfg", "l1tcm";
+			interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_SCPSYS>;
+			clock-names = "main";
+			status = "disabled";
+		};
+
+		xhci: usb@11200000 {
+			compatible = "mediatek,mt8192-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts-extended = <&gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "host";
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&infracfg CLK_INFRA_SSUSB>,
+				 <&apmixedsys CLK_APMIXED_USBPLL>,
+				 <&clk26m>,
+				 <&clk26m>,
+				 <&infracfg CLK_INFRA_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x420 102>;
+			status = "disabled";
+		};
+
+		audsys: syscon@11210000 {
+			compatible = "mediatek,mt8192-audsys", "syscon";
+			reg = <0 0x11210000 0 0x2000>;
+			#clock-cells = <1>;
+
+			afe: mt8192-afe-pcm {
+				compatible = "mediatek,mt8192-audio";
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH 0>;
+				resets = <&watchdog 17>;
+				reset-names = "audiosys";
+				mediatek,apmixedsys = <&apmixedsys>;
+				mediatek,infracfg = <&infracfg>;
+				mediatek,topckgen = <&topckgen>;
+				power-domains = <&spm MT8192_POWER_DOMAIN_AUDIO>;
+				clocks = <&audsys CLK_AUD_AFE>,
+					 <&audsys CLK_AUD_DAC>,
+					 <&audsys CLK_AUD_DAC_PREDIS>,
+					 <&audsys CLK_AUD_ADC>,
+					 <&audsys CLK_AUD_ADDA6_ADC>,
+					 <&audsys CLK_AUD_22M>,
+					 <&audsys CLK_AUD_24M>,
+					 <&audsys CLK_AUD_APLL_TUNER>,
+					 <&audsys CLK_AUD_APLL2_TUNER>,
+					 <&audsys CLK_AUD_TDM>,
+					 <&audsys CLK_AUD_TML>,
+					 <&audsys CLK_AUD_NLE>,
+					 <&audsys CLK_AUD_DAC_HIRES>,
+					 <&audsys CLK_AUD_ADC_HIRES>,
+					 <&audsys CLK_AUD_ADC_HIRES_TML>,
+					 <&audsys CLK_AUD_ADDA6_ADC_HIRES>,
+					 <&audsys CLK_AUD_3RD_DAC>,
+					 <&audsys CLK_AUD_3RD_DAC_PREDIS>,
+					 <&audsys CLK_AUD_3RD_DAC_TML>,
+					 <&audsys CLK_AUD_3RD_DAC_HIRES>,
+					 <&infracfg CLK_INFRA_AUDIO>,
+					 <&infracfg CLK_INFRA_AUDIO_26M_B>,
+					 <&topckgen CLK_TOP_AUDIO_SEL>,
+					 <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+					 <&topckgen CLK_TOP_MAINPLL_D4_D4>,
+					 <&topckgen CLK_TOP_AUD_1_SEL>,
+					 <&topckgen CLK_TOP_APLL1>,
+					 <&topckgen CLK_TOP_AUD_2_SEL>,
+					 <&topckgen CLK_TOP_APLL2>,
+					 <&topckgen CLK_TOP_AUD_ENGEN1_SEL>,
+					 <&topckgen CLK_TOP_APLL1_D4>,
+					 <&topckgen CLK_TOP_AUD_ENGEN2_SEL>,
+					 <&topckgen CLK_TOP_APLL2_D4>,
+					 <&topckgen CLK_TOP_APLL_I2S0_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S1_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S2_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S3_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S4_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S5_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S6_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S7_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S8_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S9_M_SEL>,
+					 <&topckgen CLK_TOP_APLL12_DIV0>,
+					 <&topckgen CLK_TOP_APLL12_DIV1>,
+					 <&topckgen CLK_TOP_APLL12_DIV2>,
+					 <&topckgen CLK_TOP_APLL12_DIV3>,
+					 <&topckgen CLK_TOP_APLL12_DIV4>,
+					 <&topckgen CLK_TOP_APLL12_DIVB>,
+					 <&topckgen CLK_TOP_APLL12_DIV5>,
+					 <&topckgen CLK_TOP_APLL12_DIV6>,
+					 <&topckgen CLK_TOP_APLL12_DIV7>,
+					 <&topckgen CLK_TOP_APLL12_DIV8>,
+					 <&topckgen CLK_TOP_APLL12_DIV9>,
+					 <&topckgen CLK_TOP_AUDIO_H_SEL>,
+					 <&clk26m>;
+				clock-names = "aud_afe_clk",
+					      "aud_dac_clk",
+					      "aud_dac_predis_clk",
+					      "aud_adc_clk",
+					      "aud_adda6_adc_clk",
+					      "aud_apll22m_clk",
+					      "aud_apll24m_clk",
+					      "aud_apll1_tuner_clk",
+					      "aud_apll2_tuner_clk",
+					      "aud_tdm_clk",
+					      "aud_tml_clk",
+					      "aud_nle",
+					      "aud_dac_hires_clk",
+					      "aud_adc_hires_clk",
+					      "aud_adc_hires_tml",
+					      "aud_adda6_adc_hires_clk",
+					      "aud_3rd_dac_clk",
+					      "aud_3rd_dac_predis_clk",
+					      "aud_3rd_dac_tml",
+					      "aud_3rd_dac_hires_clk",
+					      "aud_infra_clk",
+					      "aud_infra_26m_clk",
+					      "top_mux_audio",
+					      "top_mux_audio_int",
+					      "top_mainpll_d4_d4",
+					      "top_mux_aud_1",
+					      "top_apll1_ck",
+					      "top_mux_aud_2",
+					      "top_apll2_ck",
+					      "top_mux_aud_eng1",
+					      "top_apll1_d4",
+					      "top_mux_aud_eng2",
+					      "top_apll2_d4",
+					      "top_i2s0_m_sel",
+					      "top_i2s1_m_sel",
+					      "top_i2s2_m_sel",
+					      "top_i2s3_m_sel",
+					      "top_i2s4_m_sel",
+					      "top_i2s5_m_sel",
+					      "top_i2s6_m_sel",
+					      "top_i2s7_m_sel",
+					      "top_i2s8_m_sel",
+					      "top_i2s9_m_sel",
+					      "top_apll12_div0",
+					      "top_apll12_div1",
+					      "top_apll12_div2",
+					      "top_apll12_div3",
+					      "top_apll12_div4",
+					      "top_apll12_divb",
+					      "top_apll12_div5",
+					      "top_apll12_div6",
+					      "top_apll12_div7",
+					      "top_apll12_div8",
+					      "top_apll12_div9",
+					      "top_mux_audio_h",
+					      "top_clk26m_clk";
+			};
+		};
+
+		pcie: pcie@11230000 {
+			compatible = "mediatek,mt8192-pcie";
+			device_type = "pci";
+			reg = <0 0x11230000 0 0x2000>;
+			reg-names = "pcie-mac";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PL_P_250M>,
+				 <&infracfg CLK_INFRA_PCIE_TL_26M>,
+				 <&infracfg CLK_INFRA_PCIE_TL_96M>,
+				 <&infracfg CLK_INFRA_PCIE_TL_32K>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M>,
+				 <&infracfg CLK_INFRA_PCIE_TOP_H_133M>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "top_133m";
+			assigned-clocks = <&topckgen CLK_TOP_TL_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D6_D4>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x82000000 0 0x12000000 0x0 0x12000000 0 0x0800000>,
+				 <0x81000000 0 0x12800000 0x0 0x12800000 0 0x0800000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		nor_flash: spi@11234000 {
+			compatible = "mediatek,mt8192-nor";
+			reg = <0 0x11234000 0 0xe0>;
+			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_SFLASH_SEL>,
+				 <&infracfg CLK_INFRA_FLASHIF_SFLASH>,
+				 <&infracfg CLK_INFRA_FLASHIF_TOP_H_133M>;
+			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>;
+			assigned-clock-parents = <&clk26m>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			lvts_e_data1: data1@1c0 {
+				reg = <0x1c0 0x58>;
+			};
+
+			svs_calibration: calib@580 {
+				reg = <0x580 0x68>;
+			};
+		};
+
+		i2c3: i2c@11cb0000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11cb0000 0 0x1000>,
+			      <0 0x10217300 0 0x80>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_e CLK_IMP_IIC_WRAP_E_I2C3>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_e: clock-controller@11cb1000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_e";
+			reg = <0 0x11cb1000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c7: i2c@11d00000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d00000 0 0x1000>,
+			      <0 0x10217600 0 0x180>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@11d01000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d01000 0 0x1000>,
+			      <0 0x10217780 0 0x180>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C8>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c9: i2c@11d02000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d02000 0 0x1000>,
+			      <0 0x10217900 0 0x180>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C9>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_s: clock-controller@11d03000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_s";
+			reg = <0 0x11d03000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c1: i2c@11d20000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d20000 0 0x1000>,
+			      <0 0x10217100 0 0x80>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C1>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11d21000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d21000 0 0x1000>,
+			      <0 0x10217180 0 0x180>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C2>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11d22000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d22000 0 0x1000>,
+			      <0 0x10217380 0 0x180>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C4>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_ws: clock-controller@11d23000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_ws";
+			reg = <0 0x11d23000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c5: i2c@11e00000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10217500 0 0x80>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C5>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e01000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_w";
+			reg = <0 0x11e01000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy0: t-phy@11e40000 {
+			compatible = "mediatek,mt8192-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e40000 0x1000>;
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		mipi_tx0: dsi-phy@11e50000 {
+			compatible = "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11e50000 0 0x1000>;
+			clocks = <&apmixedsys CLK_APMIXED_MIPID26M>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clock-output-names = "mipi_tx0_pll";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11f00000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11f00000 0 0x1000>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C0>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11f01000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11f01000 0 0x1000>,
+			      <0 0x10217580 0 0x80>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C6>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_n: clock-controller@11f02000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_n";
+			reg = <0 0x11f02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		msdc_top: clock-controller@11f10000 {
+			compatible = "mediatek,mt8192-msdc_top";
+			reg = <0 0x11f10000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmc0: mmc@11f60000 {
+			compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11f60000 0 0x1000>, <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+				 <&msdc_top CLK_MSDC_TOP_H_MST_0P>,
+				 <&msdc_top CLK_MSDC_TOP_SRC_0P>,
+				 <&msdc_top CLK_MSDC_TOP_P_CFG>,
+				 <&msdc_top CLK_MSDC_TOP_P_MSDC0>,
+				 <&msdc_top CLK_MSDC_TOP_AXI>,
+				 <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
+			clock-names = "source", "hclk", "source_cg", "sys_cg",
+				      "pclk_cg", "axi_cg", "ahb_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11f70000 {
+			compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11f70000 0 0x1000>, <0 0x11c70000 0 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+				 <&msdc_top CLK_MSDC_TOP_H_MST_1P>,
+				 <&msdc_top CLK_MSDC_TOP_SRC_1P>,
+				 <&msdc_top CLK_MSDC_TOP_P_CFG>,
+				 <&msdc_top CLK_MSDC_TOP_P_MSDC1>,
+				 <&msdc_top CLK_MSDC_TOP_AXI>,
+				 <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
+			clock-names = "source", "hclk", "source_cg", "sys_cg",
+				      "pclk_cg", "axi_cg", "ahb_cg";
+			status = "disabled";
+		};
+
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8192-mali", "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&apmixedsys CLK_APMIXED_MFGPLL>;
+
+			power-domains = <&spm MT8192_POWER_DOMAIN_MFG2>,
+					<&spm MT8192_POWER_DOMAIN_MFG3>,
+					<&spm MT8192_POWER_DOMAIN_MFG4>,
+					<&spm MT8192_POWER_DOMAIN_MFG5>,
+					<&spm MT8192_POWER_DOMAIN_MFG6>;
+			power-domain-names = "core0", "core1", "core2", "core3", "core4";
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8192-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8192-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		mutex: mutex@14001000 {
+			compatible = "mediatek,mt8192-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
+					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+		};
+
+		smi_common: smi@14002000 {
+			compatible = "mediatek,mt8192-smi-common";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_INFRA>,
+				 <&mmsys CLK_MM_SMI_GALS>,
+				 <&mmsys CLK_MM_SMI_GALS>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+		};
+
+		larb0: larb@14003000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,larb-id = <0>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+		};
+
+		larb1: larb@14004000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,larb-id = <1>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+		};
+
+		ovl0: ovl@14005000 {
+			compatible = "mediatek,mt8192-disp-ovl";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu0 M4U_PORT_L0_OVL_RDMA0>,
+				 <&iommu0 M4U_PORT_L0_OVL_RDMA0_HDR>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+		};
+
+		ovl_2l0: ovl@14006000 {
+			compatible = "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14006000 0 0x1000>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0>,
+				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0_HDR>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+		};
+
+		rdma0: rdma@14007000 {
+			compatible = "mediatek,mt8192-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14007000 0 0x1000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu0 M4U_PORT_L0_DISP_RDMA0>;
+			mediatek,rdma-fifo-size = <5120>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>;
+		};
+
+		color0: color@14009000 {
+			compatible = "mediatek,mt8192-disp-color",
+				     "mediatek,mt8173-disp-color";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+		};
+
+		ccorr0: ccorr@1400a000 {
+			compatible = "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1400a000 0 0x1000>;
+			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+		};
+
+		aal0: aal@1400b000 {
+			compatible = "mediatek,mt8192-disp-aal",
+				     "mediatek,mt8183-disp-aal";
+			reg = <0 0x1400b000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+		};
+
+		gamma0: gamma@1400c000 {
+			compatible = "mediatek,mt8192-disp-gamma",
+				     "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+		};
+
+		postmask0: postmask@1400d000 {
+			compatible = "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+		};
+
+		dither0: dither@1400e000 {
+			compatible = "mediatek,mt8192-disp-dither",
+				     "mediatek,mt8183-disp-dither";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+		};
+
+		dsi0: dsi@14010000 {
+			compatible = "mediatek,mt8183-dsi";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI_DSI0>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			resets = <&mmsys MT8192_MMSYS_SW0_RST_B_DISP_DSI0>;
+			status = "disabled";
+
+			port {
+				dsi_out: endpoint { };
+			};
+		};
+
+		ovl_2l2: ovl@14014000 {
+			compatible = "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL2_2L>;
+			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2>,
+				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2_HDR>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
+		};
+
+		rdma4: rdma@14015000 {
+			compatible = "mediatek,mt8192-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA4>;
+			iommus = <&iommu0 M4U_PORT_L1_DISP_RDMA4>;
+			mediatek,rdma-fifo-size = <2048>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+		};
+
+		dpi0: dpi@14016000 {
+			compatible = "mediatek,mt8192-dpi";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DPI_DPI0>,
+				 <&mmsys CLK_MM_DISP_DPI0>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+		};
+
+		iommu0: m4u@1401d000 {
+			compatible = "mediatek,mt8192-m4u";
+			reg = <0 0x1401d000 0 0x1000>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+					 <&larb4>, <&larb5>, <&larb7>,
+					 <&larb9>, <&larb11>, <&larb13>,
+					 <&larb14>, <&larb16>, <&larb17>,
+					 <&larb18>, <&larb19>, <&larb20>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_SMI_IOMMU>;
+			clock-names = "bclk";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			#iommu-cells = <1>;
+		};
+
+		imgsys: clock-controller@15020000 {
+			compatible = "mediatek,mt8192-imgsys";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb9: larb@1502e000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1502e000 0 0x1000>;
+			mediatek,larb-id = <9>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_LARB9>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_ISP>;
+		};
+
+		imgsys2: clock-controller@15820000 {
+			compatible = "mediatek,mt8192-imgsys2";
+			reg = <0 0x15820000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb11: larb@1582e000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1582e000 0 0x1000>;
+			mediatek,larb-id = <11>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys2 CLK_IMG2_LARB11>,
+				 <&imgsys2 CLK_IMG2_LARB11>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_ISP2>;
+		};
+
+		vcodec_dec: video-codec@16000000 {
+			compatible = "mediatek,mt8192-vcodec-dec";
+			reg = <0 0x16000000 0 0x1000>;
+			mediatek,scp = <&scp>;
+			iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0 0 0 0x16000000 0 0x26000>;
+
+			video-codec@10000 {
+				compatible = "mediatek,mtk-vcodec-lat";
+				reg = <0x0 0x10000 0 0x800>;
+				interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+					 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+					 <&topckgen CLK_TOP_MAINPLL_D4>;
+				clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+				assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+				power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+			};
+
+			video-codec@25000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x25000 0 0x1000>;
+				interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+					 <&vdecsys CLK_VDEC_VDEC>,
+					 <&vdecsys CLK_VDEC_LAT>,
+					 <&vdecsys CLK_VDEC_LARB1>,
+					 <&topckgen CLK_TOP_MAINPLL_D4>;
+				clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+				assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+				power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+			};
+		};
+
+		larb5: larb@1600d000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1600d000 0 0x1000>;
+			mediatek,larb-id = <5>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+		};
+
+		vdecsys_soc: clock-controller@1600f000 {
+			compatible = "mediatek,mt8192-vdecsys_soc";
+			reg = <0 0x1600f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb4: larb@1602e000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1602e000 0 0x1000>;
+			mediatek,larb-id = <4>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys CLK_VDEC_SOC_LARB1>,
+				 <&vdecsys CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+		};
+
+		vdecsys: clock-controller@1602f000 {
+			compatible = "mediatek,mt8192-vdecsys";
+			reg = <0 0x1602f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@17000000 {
+			compatible = "mediatek,mt8192-vencsys";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb7: larb@17010000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			mediatek,larb-id = <7>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vencsys CLK_VENC_SET0_LARB>,
+				 <&vencsys CLK_VENC_SET1_VENC>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
+		};
+
+		vcodec_enc: vcodec@17020000 {
+			compatible = "mediatek,mt8192-vcodec-enc";
+			reg = <0 0x17020000 0 0x2000>;
+			iommus = <&iommu0 M4U_PORT_L7_VENC_RCPU>,
+				 <&iommu0 M4U_PORT_L7_VENC_REC>,
+				 <&iommu0 M4U_PORT_L7_VENC_BSDMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_SV_COMV>,
+				 <&iommu0 M4U_PORT_L7_VENC_RD_COMV>,
+				 <&iommu0 M4U_PORT_L7_VENC_CUR_LUMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_CUR_CHROMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_REF_LUMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_REF_CHROMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_SUB_R_LUMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_SUB_W_LUMA>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,scp = <&scp>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_SET1_VENC>;
+			clock-names = "venc-set1";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+		};
+
+		camsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8192-camsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb13: larb@1a001000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a001000 0 0x1000>;
+			mediatek,larb-id = <13>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys CLK_CAM_CAM>,
+				 <&camsys CLK_CAM_LARB13>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM>;
+		};
+
+		larb14: larb@1a002000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a002000 0 0x1000>;
+			mediatek,larb-id = <14>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys CLK_CAM_CAM>,
+				 <&camsys CLK_CAM_LARB14>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM>;
+		};
+
+		larb16: larb@1a00f000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a00f000 0 0x1000>;
+			mediatek,larb-id = <16>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys_rawa CLK_CAM_RAWA_CAM>,
+				 <&camsys_rawa CLK_CAM_RAWA_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb17: larb@1a010000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			mediatek,larb-id = <17>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys_rawb CLK_CAM_RAWB_CAM>,
+				 <&camsys_rawb CLK_CAM_RAWB_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		larb18: larb@1a011000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a011000 0 0x1000>;
+			mediatek,larb-id = <18>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys_rawc CLK_CAM_RAWC_LARBX>,
+				 <&camsys_rawc CLK_CAM_RAWC_CAM>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWC>;
+		};
+
+		camsys_rawa: clock-controller@1a04f000 {
+			compatible = "mediatek,mt8192-camsys_rawa";
+			reg = <0 0x1a04f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1a06f000 {
+			compatible = "mediatek,mt8192-camsys_rawb";
+			reg = <0 0x1a06f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawc: clock-controller@1a08f000 {
+			compatible = "mediatek,mt8192-camsys_rawc";
+			reg = <0 0x1a08f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@1b000000 {
+			compatible = "mediatek,mt8192-ipesys";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb20: larb@1b00f000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1b00f000 0 0x1000>;
+			mediatek,larb-id = <20>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&ipesys CLK_IPE_SMI_SUBCOM>,
+				 <&ipesys CLK_IPE_LARB20>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_IPE>;
+		};
+
+		larb19: larb@1b10f000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1b10f000 0 0x1000>;
+			mediatek,larb-id = <19>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&ipesys CLK_IPE_SMI_SUBCOM>,
+				 <&ipesys CLK_IPE_LARB19>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_IPE>;
+		};
+
+		mdpsys: clock-controller@1f000000 {
+			compatible = "mediatek,mt8192-mdpsys";
+			reg = <0 0x1f000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: larb@1f002000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1f002000 0 0x1000>;
+			mediatek,larb-id = <2>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mdpsys CLK_MDP_SMI0>,
+				 <&mdpsys CLK_MDP_SMI0>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
new file mode 100644
index 0000000000..2d5e8f371b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+	model = "Acer Tomato (rev1) board";
+	compatible = "google,tomato-rev1", "google,tomato", "mediatek,mt8195";
+};
+
+&audio_codec {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+	model = "mt8195_r1019_5682";
+};
+
+&ts_10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
new file mode 100644
index 0000000000..2586c32ce6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+	model = "Acer Tomato (rev2) board";
+	compatible = "google,tomato-rev2", "google,tomato", "mediatek,mt8195";
+};
+
+&audio_codec {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+};
+
+&pio_default {
+	pins-low-power-hdmi-disable {
+		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
+			 <PINMUX_GPIO32__FUNC_GPIO32>,
+			 <PINMUX_GPIO33__FUNC_GPIO33>,
+			 <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down;
+	};
+
+	pins-low-power-pcie0-disable {
+		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
+			 <PINMUX_GPIO20__FUNC_GPIO20>,
+			 <PINMUX_GPIO21__FUNC_GPIO21>;
+		input-enable;
+		bias-pull-down;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+	model = "mt8195_r1019_5682";
+};
+
+&ts_10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
new file mode 100644
index 0000000000..f54f9477b9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+	model = "Acer Tomato (rev3 - 4) board";
+	compatible = "google,tomato-rev4", "google,tomato-rev3",
+		     "google,tomato", "mediatek,mt8195";
+};
+
+&audio_codec {
+	compatible = "realtek,rt5682s";
+	realtek,amic-delay-ms = <250>;
+};
+
+&pio_default {
+	pins-low-power-hdmi-disable {
+		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
+			 <PINMUX_GPIO32__FUNC_GPIO32>,
+			 <PINMUX_GPIO33__FUNC_GPIO33>,
+			 <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down;
+	};
+
+	pins-low-power-pcie0-disable {
+		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
+			 <PINMUX_GPIO20__FUNC_GPIO20>,
+			 <PINMUX_GPIO21__FUNC_GPIO21>;
+		input-enable;
+		bias-pull-down;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+	model = "m8195_r1019_5682s";
+};
+
+&ts_10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
new file mode 100644
index 0000000000..3f508e5c18
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -0,0 +1,1211 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c7 = &i2c7;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 82 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		pwms = <&disp_pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	/* system wide LDO 3.3V power rail */
+	pp3300_z5: regulator-pp3300-ldo-z5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ldo_z5";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_s3: regulator-pp3300-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_s3";
+		/* automatically sequenced by PMIC EXT_PMIC_EN2 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	/* system wide 3.3V power rail */
+	pp3300_z2: regulator-pp3300-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z2";
+		/* EN pin tied to pp4200_z2, which is controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide 4.2V power rail */
+	pp4200_z2: regulator-pp4200-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp4200_z2";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	pp5000_s5: regulator-pp5000-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_s5";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	usb_vbus: regulator-5v0-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xd80000>;
+			no-map;
+		};
+
+		afe_mem: memory@60d80000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60d80000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_device_mem: memory@60e80000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60e80000 0 0x280000>;
+			no-map;
+		};
+	};
+
+	spk_amplifier: rt1019p {
+		compatible = "realtek,rt1019p";
+		label = "rt1019p";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt1019p_pins_default>;
+		sdb-gpios = <&pio 100 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&adsp {
+	status = "okay";
+
+	memory-region = <&adsp_device_mem>, <&adsp_mem>;
+};
+
+&afe {
+	status = "okay";
+
+	mediatek,etdm-in2-cowork-source = <2>;
+	mediatek,etdm-out2-cowork-source = <0>;
+	memory-region = <&afe_mem>;
+};
+
+&dp_intf0 {
+	status = "okay";
+
+	port {
+		dp_intf0_out: endpoint {
+			remote-endpoint = <&edp_in>;
+		};
+	};
+};
+
+&dp_intf1 {
+	status = "okay";
+
+	port {
+		dp_intf1_out: endpoint {
+			remote-endpoint = <&dptx_in>;
+		};
+	};
+};
+
+&edp_tx {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edptx_pins_default>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			edp_in: endpoint {
+				remote-endpoint = <&dp_intf0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			edp_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&disp_pwm0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pin_default>;
+};
+
+&dp_tx {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dptx_pin>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dptx_in: endpoint {
+				remote-endpoint = <&dp_intf1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dptx_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&mt6315_7_vbuck1>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <12500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+		vcc-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	audio_codec: codec@1a {
+		/* Realtek RT5682i or RT5682s, sharing the same configuration */
+		reg = <0x1a>;
+		interrupts-extended = <&pio 89 IRQ_TYPE_EDGE_BOTH>;
+		realtek,jd-src = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_z2>;
+		VBAT-supply = <&pp3300_z5>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cr50_int>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	ts_10: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x0001>;
+		interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		post-power-on-delay-ms = <10>;
+		vdd-supply = <&pp3300_s3>;
+		status = "disabled";
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins>;
+
+	pmic@34 {
+		#interrupt-cells = <2>;
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-controller;
+		interrupts-extended = <&pio 130 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		pinctrl-names = "default";
+		pinctrl-0 = <&subpmic_default>;
+		wakeup-source;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x14c11>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
+	max-frequency = <200000000>;
+	no-mmc;
+	no-sdio;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>, <&mmc1_pins_detect>;
+	pinctrl-1 = <&mmc1_pins_default>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt_pmic_vmch_ldo_reg>;
+	vqmmc-supply = <&mt_pmic_vmc_ldo_reg>;
+};
+
+&mt6359codec {
+	mediatek,dmic-mode = <1>;  /* one-wire */
+	mediatek,mic-type-0 = <2>; /* DMIC */
+};
+
+/* for CPU-L */
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+/* for CORE */
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_sshub_buck_reg {
+	regulator-always-on;
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <550000>;
+};
+
+/* for CORE SRAM */
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-always-on;
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&pcie1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins_default>;
+};
+
+&pio {
+	mediatek,rsel-resistance-in-si-unit;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pio_default>;
+
+	/* 144 lines */
+	gpio-line-names =
+		"I2S_SPKR_MCLK",
+		"I2S_SPKR_DATAIN",
+		"I2S_SPKR_LRCK",
+		"I2S_SPKR_BCLK",
+		"EC_AP_INT_ODL",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Schematics
+		 * call it AP_FLASH_WP_ODL.
+		 */
+		"AP_FLASH_WP_L",
+		"TCHPAD_INT_ODL",
+		"EDP_HPD_1V8",
+		"AP_I2C_CAM_SDA",
+		"AP_I2C_CAM_SCL",
+		"AP_I2C_TCHPAD_SDA_1V8",
+		"AP_I2C_TCHPAD_SCL_1V8",
+		"AP_I2C_AUD_SDA",
+		"AP_I2C_AUD_SCL",
+		"AP_I2C_TPM_SDA_1V8",
+		"AP_I2C_TPM_SCL_1V8",
+		"AP_I2C_TCHSCR_SDA_1V8",
+		"AP_I2C_TCHSCR_SCL_1V8",
+		"EC_AP_HPD_OD",
+		"",
+		"PCIE_NVME_RST_L",
+		"PCIE_NVME_CLKREQ_ODL",
+		"PCIE_RST_1V8_L",
+		"PCIE_CLKREQ_1V8_ODL",
+		"PCIE_WAKE_1V8_ODL",
+		"CLK_24M_CAM0",
+		"CAM1_SEN_EN",
+		"AP_I2C_PWR_SCL_1V8",
+		"AP_I2C_PWR_SDA_1V8",
+		"AP_I2C_MISC_SCL",
+		"AP_I2C_MISC_SDA",
+		"EN_PP5000_HDMI_X",
+		"AP_HDMITX_HTPLG",
+		"",
+		"AP_HDMITX_SCL_1V8",
+		"AP_HDMITX_SDA_1V8",
+		"AP_RTC_CLK32K",
+		"AP_EC_WATCHDOG_L",
+		"SRCLKENA0",
+		"SRCLKENA1",
+		"PWRAP_SPI0_CS_L",
+		"PWRAP_SPI0_CK",
+		"PWRAP_SPI0_MOSI",
+		"PWRAP_SPI0_MISO",
+		"SPMI_SCL",
+		"SPMI_SDA",
+		"",
+		"",
+		"",
+		"I2S_HP_DATAIN",
+		"I2S_HP_MCLK",
+		"I2S_HP_BCK",
+		"I2S_HP_LRCK",
+		"I2S_HP_DATAOUT",
+		"SD_CD_ODL",
+		"EN_PP3300_DISP_X",
+		"TCHSCR_RST_1V8_L",
+		"TCHSCR_REPORT_DISABLE",
+		"EN_PP3300_WLAN_X",
+		"BT_KILL_1V8_L",
+		"I2S_SPKR_DATAOUT",
+		"WIFI_KILL_1V8_L",
+		"BEEP_ON",
+		"SCP_I2C_SENSOR_SCL_1V8",
+		"SCP_I2C_SENSOR_SDA_1V8",
+		"",
+		"",
+		"",
+		"",
+		"AUD_CLK_MOSI",
+		"AUD_SYNC_MOSI",
+		"AUD_DAT_MOSI0",
+		"AUD_DAT_MOSI1",
+		"AUD_DAT_MISO0",
+		"AUD_DAT_MISO1",
+		"AUD_DAT_MISO2",
+		"SCP_VREQ_VAO",
+		"AP_SPI_GSC_TPM_CLK",
+		"AP_SPI_GSC_TPM_MOSI",
+		"AP_SPI_GSC_TPM_CS_L",
+		"AP_SPI_GSC_TPM_MISO",
+		"EN_PP1000_CAM_X",
+		"AP_EDP_BKLTEN",
+		"",
+		"USB3_HUB_RST_L",
+		"",
+		"WLAN_ALERT_ODL",
+		"EC_IN_RW_ODL",
+		"GSC_AP_INT_ODL",
+		"HP_INT_ODL",
+		"CAM0_RST_L",
+		"CAM1_RST_L",
+		"TCHSCR_INT_1V8_L",
+		"CAM1_DET_L",
+		"RST_ALC1011_L",
+		"",
+		"",
+		"BL_PWM_1V8",
+		"UART_AP_TX_DBG_RX",
+		"UART_DBG_TX_AP_RX",
+		"EN_SPKR",
+		"AP_EC_WARM_RST_REQ",
+		"UART_SCP_TX_DBGCON_RX",
+		"UART_DBGCON_TX_SCP_RX",
+		"",
+		"",
+		"KPCOL0",
+		"",
+		"MT6315_GPU_INT",
+		"MT6315_PROC_BC_INT",
+		"SD_CMD",
+		"SD_CLK",
+		"SD_DAT0",
+		"SD_DAT1",
+		"SD_DAT2",
+		"SD_DAT3",
+		"EMMC_DAT7",
+		"EMMC_DAT6",
+		"EMMC_DAT5",
+		"EMMC_DAT4",
+		"EMMC_RSTB",
+		"EMMC_CMD",
+		"EMMC_CLK",
+		"EMMC_DAT3",
+		"EMMC_DAT2",
+		"EMMC_DAT1",
+		"EMMC_DAT0",
+		"EMMC_DSL",
+		"",
+		"",
+		"MT6360_INT_ODL",
+		"SCP_JTAG0_TRSTN",
+		"AP_SPI_EC_CS_L",
+		"AP_SPI_EC_CLK",
+		"AP_SPI_EC_MOSI",
+		"AP_SPI_EC_MISO",
+		"SCP_JTAG0_TMS",
+		"SCP_JTAG0_TCK",
+		"SCP_JTAG0_TDO",
+		"SCP_JTAG0_TDI",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_CLK",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_MISO";
+
+	aud_pins_default: audio-default-pins {
+		pins-cmd-dat {
+		    pinmux = <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+			     <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+			     <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+			     <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+			     <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+			     <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+			     <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>,
+			     <PINMUX_GPIO0__FUNC_TDMIN_MCK>,
+			     <PINMUX_GPIO1__FUNC_TDMIN_DI>,
+			     <PINMUX_GPIO2__FUNC_TDMIN_LRCK>,
+			     <PINMUX_GPIO3__FUNC_TDMIN_BCK>,
+			     <PINMUX_GPIO60__FUNC_I2SO2_D0>,
+			     <PINMUX_GPIO49__FUNC_I2SIN_D0>,
+			     <PINMUX_GPIO50__FUNC_I2SO1_MCK>,
+			     <PINMUX_GPIO51__FUNC_I2SO1_BCK>,
+			     <PINMUX_GPIO52__FUNC_I2SO1_WS>,
+			     <PINMUX_GPIO53__FUNC_I2SO1_D0>;
+		};
+
+		pins-hp-jack-int-odl {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	cr50_int: cr50-irq-default-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO88__FUNC_GPIO88>;
+			input-enable;
+		};
+	};
+
+	cros_ec_int: cros-ec-irq-default-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			input-enable;
+		};
+	};
+
+	edptx_pins_default: edptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO7__FUNC_EDP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	disp_pwm0_pin_default: disp-pwm0-default-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
+	dptx_pin: dptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	i2c0_pins: i2c0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <1000>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO14__FUNC_SDA3>,
+				 <PINMUX_GPIO15__FUNC_SCL3>;
+			bias-pull-up = <1000>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <1000>;
+			drive-strength = <4>;
+		};
+	};
+
+	i2c5_pins: i2c5-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO29__FUNC_SCL5>,
+				 <PINMUX_GPIO30__FUNC_SDA5>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c7_pins: i2c7-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO27__FUNC_SCL7>,
+				 <PINMUX_GPIO28__FUNC_SDA7>;
+			bias-disable;
+		};
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_detect: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nor_pins_default: nor-default-pins {
+		pins-ck-io {
+			pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		pins-cs {
+			pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>;
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_pins_default: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+				 bias-pull-up;
+		};
+	};
+
+	pcie1_pins_default: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
+				 bias-pull-up;
+		};
+	};
+
+	pio_default: pio-default-pins {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO58__FUNC_GPIO58>;
+			output-high;
+			drive-strength = <14>;
+		};
+
+		pins-low-power-pd {
+			pinmux = <PINMUX_GPIO25__FUNC_GPIO25>,
+				 <PINMUX_GPIO26__FUNC_GPIO26>,
+				 <PINMUX_GPIO46__FUNC_GPIO46>,
+				 <PINMUX_GPIO47__FUNC_GPIO47>,
+				 <PINMUX_GPIO48__FUNC_GPIO48>,
+				 <PINMUX_GPIO65__FUNC_GPIO65>,
+				 <PINMUX_GPIO66__FUNC_GPIO66>,
+				 <PINMUX_GPIO67__FUNC_GPIO67>,
+				 <PINMUX_GPIO68__FUNC_GPIO68>,
+				 <PINMUX_GPIO128__FUNC_GPIO128>,
+				 <PINMUX_GPIO129__FUNC_GPIO129>;
+			input-enable;
+			bias-pull-down;
+		};
+
+		pins-low-power-pupd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>,
+				 <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO93__FUNC_GPIO93>,
+				 <PINMUX_GPIO94__FUNC_GPIO94>,
+				 <PINMUX_GPIO95__FUNC_GPIO95>,
+				 <PINMUX_GPIO96__FUNC_GPIO96>,
+				 <PINMUX_GPIO104__FUNC_GPIO104>,
+				 <PINMUX_GPIO105__FUNC_GPIO105>,
+				 <PINMUX_GPIO107__FUNC_GPIO107>;
+			input-enable;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	rt1019p_pins_default: rt1019p-default-pins {
+		pins-amp-sdb {
+			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>;
+			output-low;
+		};
+	};
+
+	scp_pins: scp-default-pins {
+		pins-vreq {
+			pinmux = <PINMUX_GPIO76__FUNC_SCP_VREQ_VAO>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
+	spi0_pins: spi0-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+				 <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+				 <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+			bias-pull-down;
+		};
+	};
+
+	subpmic_default: subpmic-default-pins {
+		subpmic_pin_irq: pins-subpmic-int-n {
+			pinmux = <PINMUX_GPIO130__FUNC_GPIO130>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	trackpad_pins: trackpad-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	touchscreen_pins: touchscreen-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO92__FUNC_GPIO92>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+		pins-rst {
+			pinmux = <PINMUX_GPIO56__FUNC_GPIO56>;
+			output-high;
+		};
+		pins-report-sw {
+			pinmux = <PINMUX_GPIO57__FUNC_GPIO57>;
+			output-low;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	status = "okay";
+
+	firmware-name = "mediatek/mt8195/scp.img";
+	memory-region = <&scp_mem>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+
+	cros-ec-rpmsg {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&sound {
+	status = "okay";
+
+	mediatek,adsp = <&adsp>;
+	mediatek,dai-link =
+		"DL10_FE", "DPTX_BE", "ETDM1_IN_BE", "ETDM2_IN_BE",
+		"ETDM1_OUT_BE", "ETDM2_OUT_BE","UL_SRC1_BE",
+		"AFE_SOF_DL2", "AFE_SOF_DL3", "AFE_SOF_UL4", "AFE_SOF_UL5";
+	pinctrl-names = "default";
+	pinctrl-0 = <&aud_pins_default>;
+};
+
+&spi0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	mediatek,pad-select = <0>;
+
+	cros_ec: ec@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cros_ec_int>;
+		spi-max-frequency = <3000000>;
+
+		keyboard-backlight {
+			compatible = "google,cros-kbd-led-backlight";
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mt_pmic_vmc_ldo_reg: regulator@0 {
+			compatible = "google,cros-ec-regulator";
+			reg = <0>;
+			regulator-name = "mt_pmic_vmc_ldo";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		mt_pmic_vmch_ldo_reg: regulator@1 {
+			compatible = "google,cros-ec-regulator";
+			reg = <1>;
+			regulator-name = "mt_pmic_vmch_ldo";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <625000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_vbus>;
+};
+
+&xhci1 {
+	status = "okay";
+
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_vbus>;
+};
+
+&xhci2 {
+	status = "okay";
+
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_vbus>;
+};
+
+&xhci3 {
+	status = "okay";
+
+	/* MT7921's USB Bluetooth has issues with USB2 LPM */
+	usb2-lpm-disable;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_vbus>;
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
new file mode 100644
index 0000000000..5d635085fe
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+
+/ {
+	model = "MediaTek MT8195 demo board";
+	compatible = "mediatek,mt8195-demo", "mediatek,mt8195";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		key-0 {
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x2 0x00000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		snd_dma_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+};
+
+&eth {
+	phy-mode ="rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 80000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	status = "okay";
+
+	mdio {
+		ethernet_phy0: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-controller;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-compatible = "usb-otg-vbus";
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-compatible = "BUCK1";
+				regulator-name = "mt6360,buck1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-compatible = "BUCK2";
+				regulator-name = "mt6360,buck2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-compatible = "LDO1";
+				regulator-name = "mt6360,ldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-compatible = "LDO2";
+				regulator-name = "mt6360,ldo2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-compatible = "LDO3";
+				regulator-name = "mt6360,ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-compatible = "LDO5";
+				regulator-name = "mt6360,ldo5";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo6: ldo6 {
+				regulator-compatible = "LDO6";
+				regulator-name = "mt6360,ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-compatible = "LDO7";
+				regulator-name = "mt6360,ldo7";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x14c11>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-always-on;
+};
+
+&pio {
+	eth_default_pins: eth-default-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>;
+		};
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			input-enable;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+};
+
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&xhci0 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&otg_vbus_regulator>;
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
new file mode 100644
index 0000000000..690dc7717f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8195.dtsi"
+
+/ {
+	model = "MediaTek MT8195 evaluation board";
+	compatible = "mediatek,mt8195-evb", "mediatek,mt8195";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pin>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pin>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pin>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pin>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&nor_flash {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&pio {
+	i2c0_pin: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			mediatek,drive-strength-adv = <0>;
+			drive-strength = <6>;
+		};
+	};
+
+	i2c1_pin: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			mediatek,drive-strength-adv = <0>;
+			drive-strength = <6>;
+		};
+	};
+
+	i2c4_pin: i2c4-pins {
+		pins {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			mediatek,drive-strength-adv = <7>;
+		};
+	};
+
+	i2c6_pin: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	i2c7_pin: i2c7-pins {
+		pins {
+			pinmux = <PINMUX_GPIO27__FUNC_SCL7>,
+				 <PINMUX_GPIO28__FUNC_SDA7>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-pins {
+		pins0 {
+			pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins1 {
+			pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>,
+				 <PINMUX_GPIO130__FUNC_SPINOR_IO2>,
+				 <PINMUX_GPIO131__FUNC_SPINOR_IO3>;
+			bias-pull-up;
+		};
+	};
+
+	uart0_pin: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pin>;
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
+
+&xhci3 {
+	/* This controller is connected with a BT device.
+	 * Disable usb2 lpm to prevent known issues.
+	 */
+	usb2-lpm-disable;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
new file mode 100644
index 0000000000..6708c4d21a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -0,0 +1,3533 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mt8195-clk.h>
+#include <dt-bindings/gce/mt8195-gce.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8195-memory-port.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/power/mt8195-power.h>
+#include <dt-bindings/reset/mt8195-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
+
+/ {
+	compatible = "mediatek,mt8195";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		dp-intf0 = &dp_intf0;
+		dp-intf1 = &dp_intf1;
+		gce0 = &gce0;
+		gce1 = &gce1;
+		ethdr0 = &ethdr0;
+		mutex0 = &mutex;
+		mutex1 = &mutex1;
+		merge1 = &merge1;
+		merge2 = &merge2;
+		merge3 = &merge3;
+		merge4 = &merge4;
+		merge5 = &merge5;
+		vdo1-rdma0 = &vdo1_rdma0;
+		vdo1-rdma1 = &vdo1_rdma1;
+		vdo1-rdma2 = &vdo1_rdma2;
+		vdo1-rdma3 = &vdo1_rdma3;
+		vdo1-rdma4 = &vdo1_rdma4;
+		vdo1-rdma5 = &vdo1_rdma5;
+		vdo1-rdma6 = &vdo1_rdma6;
+		vdo1-rdma7 = &vdo1_rdma7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			performance-domains = <&performance 0>;
+			clock-frequency = <1701000000>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			performance-domains = <&performance 0>;
+			clock-frequency = <1701000000>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			performance-domains = <&performance 0>;
+			clock-frequency = <1701000000>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			performance-domains = <&performance 0>;
+			clock-frequency = <1701000000>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x400>;
+			enable-method = "psci";
+			performance-domains = <&performance 1>;
+			clock-frequency = <2171000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x500>;
+			enable-method = "psci";
+			performance-domains = <&performance 1>;
+			clock-frequency = <2171000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x600>;
+			enable-method = "psci";
+			performance-domains = <&performance 1>;
+			clock-frequency = <2171000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x700>;
+			enable-method = "psci";
+			performance-domains = <&performance 1>;
+			clock-frequency = <2171000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_ret_l: cpu-retention-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <95>;
+				min-residency-us = <580>;
+			};
+
+			cpu_ret_b: cpu-retention-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <45>;
+				exit-latency-us = <140>;
+				min-residency-us = <740>;
+			};
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010002>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <155>;
+				min-residency-us = <840>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010002>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+	};
+
+	dsu-pmu {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+		status = "fail";
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	sound: mt8195-sound {
+		mediatek,platform = <&afe>;
+		status = "disabled";
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	performance: performance-controller@11bc10 {
+		compatible = "mediatek,cpufreq-hw";
+		reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+		#performance-domain-cells = <1>;
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-390000000 {
+			opp-hz = /bits/ 64 <390000000>;
+			opp-microvolt = <625000>;
+		};
+		opp-410000000 {
+			opp-hz = /bits/ 64 <410000000>;
+			opp-microvolt = <631250>;
+		};
+		opp-431000000 {
+			opp-hz = /bits/ 64 <431000000>;
+			opp-microvolt = <631250>;
+		};
+		opp-473000000 {
+			opp-hz = /bits/ 64 <473000000>;
+			opp-microvolt = <637500>;
+		};
+		opp-515000000 {
+			opp-hz = /bits/ 64 <515000000>;
+			opp-microvolt = <637500>;
+		};
+		opp-556000000 {
+			opp-hz = /bits/ 64 <556000000>;
+			opp-microvolt = <643750>;
+		};
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <650000>;
+		};
+		opp-640000000 {
+			opp-hz = /bits/ 64 <640000000>;
+			opp-microvolt = <650000>;
+		};
+		opp-670000000 {
+			opp-hz = /bits/ 64 <670000000>;
+			opp-microvolt = <662500>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <675000>;
+		};
+		opp-730000000 {
+			opp-hz = /bits/ 64 <730000000>;
+			opp-microvolt = <687500>;
+		};
+		opp-760000000 {
+			opp-hz = /bits/ 64 <760000000>;
+			opp-microvolt = <700000>;
+		};
+		opp-790000000 {
+			opp-hz = /bits/ 64 <790000000>;
+			opp-microvolt = <712500>;
+		};
+		opp-820000000 {
+			opp-hz = /bits/ 64 <820000000>;
+			opp-microvolt = <725000>;
+		};
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <737500>;
+		};
+		opp-880000000 {
+			opp-hz = /bits/ 64 <880000000>;
+			opp-microvolt = <750000>;
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8195-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8195-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8195-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>,
+			      <0 0x11d30000 0 0x1000>,
+			      <0 0x11d40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11eb0000 0 0x1000>,
+			      <0 0x11f40000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
+				    "iocfg_br", "iocfg_lm", "iocfg_rb",
+				    "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 144>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8195-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				mfg0: power-domain@MT8195_POWER_DOMAIN_MFG0 {
+					reg = <MT8195_POWER_DOMAIN_MFG0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8195_POWER_DOMAIN_MFG1 {
+						reg = <MT8195_POWER_DOMAIN_MFG1>;
+						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
+							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
+						clock-names = "mfg", "alt";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8195_POWER_DOMAIN_MFG2 {
+							reg = <MT8195_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG3 {
+							reg = <MT8195_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG4 {
+							reg = <MT8195_POWER_DOMAIN_MFG4>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG5 {
+							reg = <MT8195_POWER_DOMAIN_MFG5>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG6 {
+							reg = <MT8195_POWER_DOMAIN_MFG6>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_VPPSYS0 {
+					reg = <MT8195_POWER_DOMAIN_VPPSYS0>;
+					clocks = <&topckgen CLK_TOP_VPP>,
+						 <&topckgen CLK_TOP_CAM>,
+						 <&topckgen CLK_TOP_CCU>,
+						 <&topckgen CLK_TOP_IMG>,
+						 <&topckgen CLK_TOP_VENC>,
+						 <&topckgen CLK_TOP_VDEC>,
+						 <&topckgen CLK_TOP_WPE_VPP>,
+						 <&topckgen CLK_TOP_CFG_VPP0>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS_CORE1>,
+						 <&vppsys0 CLK_VPP0_GALS_INFRA>,
+						 <&vppsys0 CLK_VPP0_GALS_CAMSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>,
+						 <&vppsys0 CLK_VPP0_SMI_REORDER>,
+						 <&vppsys0 CLK_VPP0_SMI_IOMMU>,
+						 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_EMI0_EMI1>,
+						 <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>,
+						 <&vppsys0 CLK_VPP0_SMI_RSI>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+						 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+					clock-names = "vppsys", "vppsys1", "vppsys2", "vppsys3",
+						      "vppsys4", "vppsys5", "vppsys6", "vppsys7",
+						      "vppsys0-0", "vppsys0-1", "vppsys0-2", "vppsys0-3",
+						      "vppsys0-4", "vppsys0-5", "vppsys0-6", "vppsys0-7",
+						      "vppsys0-8", "vppsys0-9", "vppsys0-10", "vppsys0-11",
+						      "vppsys0-12", "vppsys0-13", "vppsys0-14",
+						      "vppsys0-15", "vppsys0-16", "vppsys0-17",
+						      "vppsys0-18";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8195_POWER_DOMAIN_VDEC1 {
+						reg = <MT8195_POWER_DOMAIN_VDEC1>;
+						clocks = <&vdecsys CLK_VDEC_LARB1>;
+						clock-names = "vdec1-0";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
+						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+						clock-names = "venc1-larb";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8195_POWER_DOMAIN_VDOSYS0 {
+						reg = <MT8195_POWER_DOMAIN_VDOSYS0>;
+						clocks = <&topckgen CLK_TOP_CFG_VDO0>,
+							 <&vdosys0 CLK_VDO0_SMI_GALS>,
+							 <&vdosys0 CLK_VDO0_SMI_COMMON>,
+							 <&vdosys0 CLK_VDO0_SMI_EMI>,
+							 <&vdosys0 CLK_VDO0_SMI_IOMMU>,
+							 <&vdosys0 CLK_VDO0_SMI_LARB>,
+							 <&vdosys0 CLK_VDO0_SMI_RSI>;
+						clock-names = "vdosys0", "vdosys0-0", "vdosys0-1",
+							      "vdosys0-2", "vdosys0-3",
+							      "vdosys0-4", "vdosys0-5";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8195_POWER_DOMAIN_VPPSYS1 {
+							reg = <MT8195_POWER_DOMAIN_VPPSYS1>;
+							clocks = <&topckgen CLK_TOP_CFG_VPP1>,
+								 <&vppsys1 CLK_VPP1_VPPSYS1_GALS>,
+								 <&vppsys1 CLK_VPP1_VPPSYS1_LARB>;
+							clock-names = "vppsys1", "vppsys1-0",
+								      "vppsys1-1";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_WPESYS {
+							reg = <MT8195_POWER_DOMAIN_WPESYS>;
+							clocks = <&wpesys CLK_WPE_SMI_LARB7>,
+								 <&wpesys CLK_WPE_SMI_LARB8>,
+								 <&wpesys CLK_WPE_SMI_LARB7_P>,
+								 <&wpesys CLK_WPE_SMI_LARB8_P>;
+							clock-names = "wepsys-0", "wepsys-1", "wepsys-2",
+								      "wepsys-3";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VDEC0 {
+							reg = <MT8195_POWER_DOMAIN_VDEC0>;
+							clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+							clock-names = "vdec0-0";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VDEC2 {
+							reg = <MT8195_POWER_DOMAIN_VDEC2>;
+							clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+							clock-names = "vdec2-0";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VENC {
+							reg = <MT8195_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC_LARB>;
+							clock-names = "venc0-larb";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VDOSYS1 {
+							reg = <MT8195_POWER_DOMAIN_VDOSYS1>;
+							clocks = <&topckgen CLK_TOP_CFG_VDO1>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB2>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB3>,
+								 <&vdosys1 CLK_VDO1_GALS>;
+							clock-names = "vdosys1", "vdosys1-0",
+								      "vdosys1-1", "vdosys1-2";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8195_POWER_DOMAIN_DP_TX {
+								reg = <MT8195_POWER_DOMAIN_DP_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_EPD_TX {
+								reg = <MT8195_POWER_DOMAIN_EPD_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_HDMI_TX {
+								reg = <MT8195_POWER_DOMAIN_HDMI_TX>;
+								clocks = <&topckgen CLK_TOP_HDMI_APB>;
+								clock-names = "hdmi_tx";
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_IMG {
+							reg = <MT8195_POWER_DOMAIN_IMG>;
+							clocks = <&imgsys CLK_IMG_LARB9>,
+								 <&imgsys CLK_IMG_GALS>;
+							clock-names = "img-0", "img-1";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8195_POWER_DOMAIN_DIP {
+								reg = <MT8195_POWER_DOMAIN_DIP>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_IPE {
+								reg = <MT8195_POWER_DOMAIN_IPE>;
+								clocks = <&topckgen CLK_TOP_IPE>,
+									 <&imgsys CLK_IMG_IPE>,
+									 <&ipesys CLK_IPE_SMI_LARB12>;
+								clock-names = "ipe", "ipe-0", "ipe-1";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_CAM {
+							reg = <MT8195_POWER_DOMAIN_CAM>;
+							clocks = <&camsys CLK_CAM_LARB13>,
+								 <&camsys CLK_CAM_LARB14>,
+								 <&camsys CLK_CAM_CAM2MM0_GALS>,
+								 <&camsys CLK_CAM_CAM2MM1_GALS>,
+								 <&camsys CLK_CAM_CAM2SYS_GALS>;
+							clock-names = "cam-0", "cam-1", "cam-2", "cam-3",
+								      "cam-4";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8195_POWER_DOMAIN_CAM_RAWA {
+								reg = <MT8195_POWER_DOMAIN_CAM_RAWA>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_CAM_RAWB {
+								reg = <MT8195_POWER_DOMAIN_CAM_RAWB>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_CAM_MRAW {
+								reg = <MT8195_POWER_DOMAIN_CAM_MRAW>;
+								#power-domain-cells = <0>;
+							};
+						};
+					};
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P0 {
+					reg = <MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P1 {
+					reg = <MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_PCIE_PHY {
+					reg = <MT8195_POWER_DOMAIN_PCIE_PHY>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY {
+					reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_CSI_RX_TOP {
+					reg = <MT8195_POWER_DOMAIN_CSI_RX_TOP>;
+					clocks = <&topckgen CLK_TOP_SENINF>,
+						 <&topckgen CLK_TOP_SENINF2>;
+					clock-names = "csi_rx_top", "csi_rx_top1";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_ETHER {
+					reg = <MT8195_POWER_DOMAIN_ETHER>;
+					clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+					clock-names = "ether";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_ADSP {
+					reg = <MT8195_POWER_DOMAIN_ADSP>;
+					clocks = <&topckgen CLK_TOP_ADSP>,
+						 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>;
+					clock-names = "adsp", "adsp1";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8195_POWER_DOMAIN_AUDIO {
+						reg = <MT8195_POWER_DOMAIN_AUDIO>;
+						clocks = <&topckgen CLK_TOP_A1SYS_HP>,
+							 <&topckgen CLK_TOP_AUD_INTBUS>,
+							 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+							 <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>;
+						clock-names = "audio", "audio1", "audio2",
+							      "audio3";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8195-wdt";
+			mediatek,disable-extrst;
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8195-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8195-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10024000 {
+			compatible = "mediatek,mt8195-pwrap", "syscon";
+			reg = <0 0x10024000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+			assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+		};
+
+		spmi: spmi@10027000 {
+			compatible = "mediatek,mt8195-spmi";
+			reg = <0 0x10027000 0 0x000e00>,
+			      <0 0x10029000 0 0x000100>;
+			reg-names = "pmif", "spmimst";
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_M_MST>;
+			clock-names = "pmif_sys_ck",
+				      "pmif_tmr_ck",
+				      "spmimst_clk_mux";
+			assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+		};
+
+		iommu_infra: infra-iommu@10315000 {
+			compatible = "mediatek,mt8195-iommu-infra";
+			reg = <0 0x10315000 0 0x5000>;
+			interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH 0>;
+			#iommu-cells = <1>;
+		};
+
+		gce0: mailbox@10320000 {
+			compatible = "mediatek,mt8195-gce";
+			reg = <0 0x10320000 0 0x4000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+		};
+
+		gce1: mailbox@10330000 {
+			compatible = "mediatek,mt8195-gce";
+			reg = <0 0x10330000 0 0x4000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8195-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>,
+			      <0 0x10700000 0 0x8000>;
+			reg-names = "sram", "cfg", "l1tcm";
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		scp_adsp: clock-controller@10720000 {
+			compatible = "mediatek,mt8195-scp_adsp";
+			reg = <0 0x10720000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		adsp: dsp@10803000 {
+			compatible = "mediatek,mt8195-dsp";
+			reg = <0 0x10803000 0 0x1000>,
+			      <0 0x10840000 0 0x40000>;
+			reg-names = "cfg", "sram";
+			clocks = <&topckgen CLK_TOP_ADSP>,
+				 <&clk26m>,
+				 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+				 <&topckgen CLK_TOP_MAINPLL_D7_D2>,
+				 <&scp_adsp CLK_SCP_ADSP_AUDIODSP>,
+				 <&topckgen CLK_TOP_AUDIO_H>;
+			clock-names = "adsp_sel",
+				 "clk26m_ck",
+				 "audio_local_bus",
+				 "mainpll_d7_d2",
+				 "scp_adsp_audiodsp",
+				 "audio_h";
+			power-domains = <&spm MT8195_POWER_DOMAIN_ADSP>;
+			mbox-names = "rx", "tx";
+			mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+			status = "disabled";
+		};
+
+		adsp_mailbox0: mailbox@10816000 {
+			compatible = "mediatek,mt8195-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10816000 0 0x1000>;
+			interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_mailbox1: mailbox@10817000 {
+			compatible = "mediatek,mt8195-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10817000 0 0x1000>;
+			interrupts = <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		afe: mt8195-afe-pcm@10890000 {
+			compatible = "mediatek,mt8195-audio";
+			reg = <0 0x10890000 0 0x10000>;
+			mediatek,topckgen = <&topckgen>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>;
+			interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&watchdog 14>;
+			reset-names = "audiosys";
+			clocks = <&clk26m>,
+				<&apmixedsys CLK_APMIXED_APLL1>,
+				<&apmixedsys CLK_APMIXED_APLL2>,
+				<&topckgen CLK_TOP_APLL12_DIV0>,
+				<&topckgen CLK_TOP_APLL12_DIV1>,
+				<&topckgen CLK_TOP_APLL12_DIV2>,
+				<&topckgen CLK_TOP_APLL12_DIV3>,
+				<&topckgen CLK_TOP_APLL12_DIV9>,
+				<&topckgen CLK_TOP_A1SYS_HP>,
+				<&topckgen CLK_TOP_AUD_INTBUS>,
+				<&topckgen CLK_TOP_AUDIO_H>,
+				<&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+				<&topckgen CLK_TOP_DPTX_MCK>,
+				<&topckgen CLK_TOP_I2SO1_MCK>,
+				<&topckgen CLK_TOP_I2SO2_MCK>,
+				<&topckgen CLK_TOP_I2SI1_MCK>,
+				<&topckgen CLK_TOP_I2SI2_MCK>,
+				<&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>,
+				<&scp_adsp CLK_SCP_ADSP_AUDIODSP>;
+			clock-names = "clk26m",
+				"apll1_ck",
+				"apll2_ck",
+				"apll12_div0",
+				"apll12_div1",
+				"apll12_div2",
+				"apll12_div3",
+				"apll12_div9",
+				"a1sys_hp_sel",
+				"aud_intbus_sel",
+				"audio_h_sel",
+				"audio_local_bus_sel",
+				"dptx_m_sel",
+				"i2so1_m_sel",
+				"i2so2_m_sel",
+				"i2si1_m_sel",
+				"i2si2_m_sel",
+				"infra_ao_audio_26m_b",
+				"scp_adsp_audiodsp";
+			status = "disabled";
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001100 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11001200 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001200 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11001300 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001300 0 0x100>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11001400 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001400 0 0x100>;
+			interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart4: serial@11001500 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001500 0 0x100>;
+			interrupts = <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART4>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart5: serial@11001600 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001600 0 0x100>;
+			interrupts = <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART5>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		auxadc: auxadc@11002000 {
+			compatible = "mediatek,mt8195-auxadc",
+				     "mediatek,mt8173-auxadc";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pericfg_ao: syscon@11003000 {
+			compatible = "mediatek,mt8195-pericfg_ao", "syscon";
+			reg = <0 0x11003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8195-lvts-ap";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
+		disp_pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM0>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		disp_pwm1: pwm@1100f000 {
+			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100f000 0 0x1000>;
+			interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM1>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM1>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spis0: spi@1101d000 {
+			compatible = "mediatek,mt8195-spi-slave";
+			reg = <0 0x1101d000 0 0x1000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SPIS0>;
+			clock-names = "spi";
+			assigned-clocks = <&topckgen CLK_TOP_SPIS>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+			status = "disabled";
+		};
+
+		spis1: spi@1101e000 {
+			compatible = "mediatek,mt8195-spi-slave";
+			reg = <0 0x1101e000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SPIS1>;
+			clock-names = "spi";
+			assigned-clocks = <&topckgen CLK_TOP_SPIS>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+			status = "disabled";
+		};
+
+		eth: ethernet@11021000 {
+			compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a";
+			reg = <0 0x11021000 0 0x4000>;
+			interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "macirq";
+			clock-names = "axi",
+				      "apb",
+				      "mac_main",
+				      "ptp_ref",
+				      "rmii_internal",
+				      "mac_cg";
+			clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
+				 <&topckgen CLK_TOP_SNPS_ETH_250M>,
+				 <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+				 <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+			assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
+					  <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+					  <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
+						 <&topckgen CLK_TOP_ETHPLL_D8>,
+						 <&topckgen CLK_TOP_ETHPLL_D10>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>;
+			mediatek,pericfg = <&infracfg_ao>;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x10>;
+					snps,dcb-algorithm;
+					snps,priority = <0x0>;
+				};
+				queue1 {
+					snps,weight = <0x11>;
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+				};
+				queue2 {
+					snps,weight = <0x12>;
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+				};
+				queue3 {
+					snps,weight = <0x13>;
+					snps,dcb-algorithm;
+					snps,priority = <0x3>;
+				};
+			};
+		};
+
+		xhci0: usb@11200000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+				 <&topckgen CLK_TOP_SSUSB_REF>,
+				 <&apmixedsys CLK_APMIXED_USB1PLL>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8195-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8195-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c70000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8195-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11250000 0 0x1000>,
+			      <0 0x11e60000 0 0x1000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_2>,
+				 <&infracfg_ao CLK_INFRA_AO_CG1_MSDC2>,
+				 <&infracfg_ao CLK_INFRA_AO_CG3_MSDC2>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_2>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8195-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
+		xhci1: usb@11290000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11290000 0 0x1000>,
+			      <0 0x11293e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_1P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_P1_REF>,
+				 <&apmixedsys CLK_APMIXED_USB1PLL>,
+				 <&clk26m>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 104>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_P2_REF>,
+				 <&clk26m>,
+				 <&clk26m>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		xhci3: usb@112b0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port3 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_P3_REF>,
+				 <&clk26m>,
+				 <&clk26m>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		pcie0: pcie@112f0000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f0000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x20000000
+				  0x0 0x20000000 0 0x200000>,
+				 <0x82000000 0 0x20200000
+				  0x0 0x20200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE0 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@112f8000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f8000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x24000000
+				  0x0 0x24000000 0 0x200000>,
+				 <0x82000000 0 0x24200000
+				  0x0 0x24200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE1 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_P1_TL_96M>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_P1_PERI_26M>,
+				 /* Designer has connect pcie1 with peri_mem_p0 clock */
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL_P1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&u3port1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		nor_flash: spi@1132c000 {
+			compatible = "mediatek,mt8195-nor",
+				     "mediatek,mt8173-nor";
+			reg = <0 0x1132c000 0 0x1000>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_FLASH>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+			clock-names = "spi", "sf", "axi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u3_tx_imp_p0: usb3-tx-imp@184,1 {
+				reg = <0x184 0x1>;
+				bits = <0 5>;
+			};
+			u3_rx_imp_p0: usb3-rx-imp@184,2 {
+				reg = <0x184 0x2>;
+				bits = <5 5>;
+			};
+			u3_intr_p0: usb3-intr@185 {
+				reg = <0x185 0x1>;
+				bits = <2 6>;
+			};
+			comb_tx_imp_p1: usb3-tx-imp@186,1 {
+				reg = <0x186 0x1>;
+				bits = <0 5>;
+			};
+			comb_rx_imp_p1: usb3-rx-imp@186,2 {
+				reg = <0x186 0x2>;
+				bits = <5 5>;
+			};
+			comb_intr_p1: usb3-intr@187 {
+				reg = <0x187 0x1>;
+				bits = <2 6>;
+			};
+			u2_intr_p0: usb2-intr-p0@188,1 {
+				reg = <0x188 0x1>;
+				bits = <0 5>;
+			};
+			u2_intr_p1: usb2-intr-p1@188,2 {
+				reg = <0x188 0x2>;
+				bits = <5 5>;
+			};
+			u2_intr_p2: usb2-intr-p2@189,1 {
+				reg = <0x189 0x1>;
+				bits = <2 5>;
+			};
+			u2_intr_p3: usb2-intr-p3@189,2 {
+				reg = <0x189 0x2>;
+				bits = <7 5>;
+			};
+			pciephy_rx_ln1: pciephy-rx-ln1@190,1 {
+				reg = <0x190 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln1_nmos: pciephy-tx-ln1-nmos@190,2 {
+				reg = <0x190 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln1_pmos: pciephy-tx-ln1-pmos@191,1 {
+				reg = <0x191 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_rx_ln0: pciephy-rx-ln0@191,2 {
+				reg = <0x191 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln0_nmos: pciephy-tx-ln0-nmos@192,1 {
+				reg = <0x192 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln0_pmos: pciephy-tx-ln0-pmos@192,2 {
+				reg = <0x192 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_glb_intr: pciephy-glb-intr@193 {
+				reg = <0x193 0x1>;
+				bits = <0 4>;
+			};
+			dp_calibration: dp-data@1ac {
+				reg = <0x1ac 0x10>;
+			};
+			lvts_efuse_data1: lvts1-calib@1bc {
+				reg = <0x1bc 0x14>;
+			};
+			lvts_efuse_data2: lvts2-calib@1d0 {
+				reg = <0x1d0 0x38>;
+			};
+		};
+
+		u3phy2: t-phy@11c40000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c40000 0x700>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy3: t-phy@11c50000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c50000 0x700>;
+			status = "disabled";
+
+			u2port3: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		i2c5: i2c@11d00000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11d00000 0 0x1000>,
+			      <0 0x10220580 0 0x80>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11d01000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11d01000 0 0x1000>,
+			      <0 0x10220600 0 0x80>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@11d02000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11d02000 0 0x1000>,
+			      <0 0x10220680 0 0x80>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_s: clock-controller@11d03000 {
+			compatible = "mediatek,mt8195-imp_iic_wrap_s";
+			reg = <0 0x11d03000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c0: i2c@11e00000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10220080 0 0x80>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11e01000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e01000 0 0x1000>,
+			      <0 0x10220200 0 0x80>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11e02000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e02000 0 0x1000>,
+			      <0 0x10220380 0 0x80>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11e03000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e03000 0 0x1000>,
+			      <0 0x10220480 0 0x80>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11e04000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e04000 0 0x1000>,
+			      <0 0x10220500 0 0x80>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e05000 {
+			compatible = "mediatek,mt8195-imp_iic_wrap_w";
+			reg = <0 0x11e05000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy1: t-phy@11e30000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e30000 0xe00>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
+					 <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
+				clock-names = "ref", "da_ref";
+				nvmem-cells = <&comb_intr_p1>,
+					      <&comb_rx_imp_p1>,
+					      <&comb_tx_imp_p1>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy0: t-phy@11e40000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e40000 0xe00>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
+					 <&topckgen CLK_TOP_SSUSB_PHY_REF>;
+				clock-names = "ref", "da_ref";
+				nvmem-cells = <&u3_intr_p0>,
+					      <&u3_rx_imp_p0>,
+					      <&u3_tx_imp_p0>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
+				#phy-cells = <1>;
+			};
+		};
+
+		pciephy: phy@11e80000 {
+			compatible = "mediatek,mt8195-pcie-phy";
+			reg = <0 0x11e80000 0 0x10000>;
+			reg-names = "sif";
+			nvmem-cells = <&pciephy_glb_intr>, <&pciephy_tx_ln0_pmos>,
+				      <&pciephy_tx_ln0_nmos>, <&pciephy_rx_ln0>,
+				      <&pciephy_tx_ln1_pmos>, <&pciephy_tx_ln1_nmos>,
+				      <&pciephy_rx_ln1>;
+			nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+					   "tx_ln0_nmos", "rx_ln0",
+					   "tx_ln1_pmos", "tx_ln1_nmos",
+					   "rx_ln1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_PHY>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ufsphy: ufs-phy@11fa0000 {
+			compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
+			reg = <0 0x11fa0000 0 0xc000>;
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "unipro", "mp";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8195-mali", "mediatek,mt8192-mali",
+				     "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
+			interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_MFG2>,
+					<&spm MT8195_POWER_DOMAIN_MFG3>,
+					<&spm MT8195_POWER_DOMAIN_MFG4>,
+					<&spm MT8195_POWER_DOMAIN_MFG5>,
+					<&spm MT8195_POWER_DOMAIN_MFG6>;
+			power-domain-names = "core0", "core1", "core2", "core3", "core4";
+			status = "disabled";
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8195-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys0: syscon@14000000 {
+			compatible = "mediatek,mt8195-vppsys0", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mutex@1400f000 {
+			compatible = "mediatek,mt8195-vpp-mutex";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MUTEX>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		smi_sub_common_vpp0_vpp1_2x1: smi@14010000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x14010000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		smi_sub_common_vdec_vpp0_2x1: smi@14011000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x14011000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		smi_common_vpp: smi@14012000 {
+			compatible = "mediatek,mt8195-smi-common-vpp";
+			reg = <0 0x14012000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+			       <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+			       <&vppsys0 CLK_VPP0_SMI_RSI>,
+			       <&vppsys0 CLK_VPP0_SMI_RSI>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		larb4: larb@14013000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14013000 0 0x1000>;
+			mediatek,larb-id = <4>;
+			mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+			       <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		iommu_vpp: iommu@14018000 {
+			compatible = "mediatek,mt8195-iommu-vpp";
+			reg = <0 0x14018000 0 0x1000>;
+			mediatek,larbs = <&larb1 &larb3 &larb4 &larb6 &larb8
+					  &larb12 &larb14 &larb16 &larb18
+					  &larb20 &larb22 &larb23 &larb26
+					  &larb27>;
+			interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_IOMMU>;
+			clock-names = "bclk";
+			#iommu-cells = <1>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		wpesys: clock-controller@14e00000 {
+			compatible = "mediatek,mt8195-wpesys";
+			reg = <0 0x14e00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp0: clock-controller@14e02000 {
+			compatible = "mediatek,mt8195-wpesys_vpp0";
+			reg = <0 0x14e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp1: clock-controller@14e03000 {
+			compatible = "mediatek,mt8195-wpesys_vpp1";
+			reg = <0 0x14e03000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb7: larb@14e04000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14e04000 0 0x1000>;
+			mediatek,larb-id = <7>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&wpesys CLK_WPE_SMI_LARB7>,
+				 <&wpesys CLK_WPE_SMI_LARB7>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>;
+		};
+
+		larb8: larb@14e05000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14e05000 0 0x1000>;
+			mediatek,larb-id = <8>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&wpesys CLK_WPE_SMI_LARB8>,
+			       <&wpesys CLK_WPE_SMI_LARB8>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>;
+		};
+
+		vppsys1: syscon@14f00000 {
+			compatible = "mediatek,mt8195-vppsys1", "syscon";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mutex@14f01000 {
+			compatible = "mediatek,mt8195-vpp-mutex";
+			reg = <0 0x14f01000 0 0x1000>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		larb5: larb@14f02000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14f02000 0 0x1000>;
+			mediatek,larb-id = <5>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>,
+			       <&vppsys1 CLK_VPP1_VPPSYS1_GALS>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		larb6: larb@14f03000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14f03000 0 0x1000>;
+			mediatek,larb-id = <6>;
+			mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>;
+			clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>,
+			       <&vppsys1 CLK_VPP1_VPPSYS1_GALS>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8195-imgsys";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb9: larb@15001000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,larb-id = <9>;
+			mediatek,smi = <&smi_sub_common_img1_3x1>;
+			clocks = <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_IMG>;
+		};
+
+		smi_sub_common_img0_3x1: smi@15002000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x15002000 0 0x1000>;
+			clocks = <&imgsys CLK_IMG_IPE>,
+				 <&imgsys CLK_IMG_IPE>,
+				 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_IMG>;
+		};
+
+		smi_sub_common_img1_3x1: smi@15003000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x15003000 0 0x1000>;
+			clocks = <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_GALS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vdo>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_IMG>;
+		};
+
+		imgsys1_dip_top: clock-controller@15110000 {
+			compatible = "mediatek,mt8195-imgsys1_dip_top";
+			reg = <0 0x15110000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb10: larb@15120000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15120000 0 0x1000>;
+			mediatek,larb-id = <10>;
+			mediatek,smi = <&smi_sub_common_img1_3x1>;
+			clocks = <&imgsys CLK_IMG_DIP0>,
+			       <&imgsys1_dip_top CLK_IMG1_DIP_TOP_LARB10>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DIP>;
+		};
+
+		imgsys1_dip_nr: clock-controller@15130000 {
+			compatible = "mediatek,mt8195-imgsys1_dip_nr";
+			reg = <0 0x15130000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_wpe: clock-controller@15220000 {
+			compatible = "mediatek,mt8195-imgsys1_wpe";
+			reg = <0 0x15220000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb11: larb@15230000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15230000 0 0x1000>;
+			mediatek,larb-id = <11>;
+			mediatek,smi = <&smi_sub_common_img1_3x1>;
+			clocks = <&imgsys CLK_IMG_WPE0>,
+			       <&imgsys1_wpe CLK_IMG1_WPE_LARB11>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DIP>;
+		};
+
+		ipesys: clock-controller@15330000 {
+			compatible = "mediatek,mt8195-ipesys";
+			reg = <0 0x15330000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb12: larb@15340000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15340000 0 0x1000>;
+			mediatek,larb-id = <12>;
+			mediatek,smi = <&smi_sub_common_img0_3x1>;
+			clocks = <&ipesys CLK_IPE_SMI_LARB12>,
+				 <&ipesys CLK_IPE_SMI_LARB12>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_IPE>;
+		};
+
+		camsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8195-camsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb13: larb@16001000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16001000 0 0x1000>;
+			mediatek,larb-id = <13>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+			       <&camsys CLK_CAM_LARB13>,
+			       <&camsys CLK_CAM_CAM2MM0_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		larb14: larb@16002000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16002000 0 0x1000>;
+			mediatek,larb-id = <14>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys CLK_CAM_LARB14>,
+				 <&camsys CLK_CAM_LARB14>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		smi_sub_common_cam_4x1: smi@16004000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x16004000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+				 <&camsys CLK_CAM_LARB13>,
+				 <&camsys CLK_CAM_CAM2MM0_GALS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vdo>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		smi_sub_common_cam_7x1: smi@16005000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x16005000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB14>,
+				 <&camsys CLK_CAM_CAM2MM1_GALS>,
+				 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		larb16: larb@16012000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16012000 0 0x1000>;
+			mediatek,larb-id = <16>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys_rawa CLK_CAM_RAWA_LARBX>,
+				 <&camsys_rawa CLK_CAM_RAWA_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb17: larb@16013000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16013000 0 0x1000>;
+			mediatek,larb-id = <17>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys_yuva CLK_CAM_YUVA_LARBX>,
+				 <&camsys_yuva CLK_CAM_YUVA_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb27: larb@16014000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16014000 0 0x1000>;
+			mediatek,larb-id = <27>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys_rawb CLK_CAM_RAWB_LARBX>,
+				 <&camsys_rawb CLK_CAM_RAWB_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		larb28: larb@16015000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16015000 0 0x1000>;
+			mediatek,larb-id = <28>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys_yuvb CLK_CAM_YUVB_LARBX>,
+				 <&camsys_yuvb CLK_CAM_YUVB_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		camsys_rawa: clock-controller@1604f000 {
+			compatible = "mediatek,mt8195-camsys_rawa";
+			reg = <0 0x1604f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuva: clock-controller@1606f000 {
+			compatible = "mediatek,mt8195-camsys_yuva";
+			reg = <0 0x1606f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1608f000 {
+			compatible = "mediatek,mt8195-camsys_rawb";
+			reg = <0 0x1608f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuvb: clock-controller@160af000 {
+			compatible = "mediatek,mt8195-camsys_yuvb";
+			reg = <0 0x160af000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_mraw: clock-controller@16140000 {
+			compatible = "mediatek,mt8195-camsys_mraw";
+			reg = <0 0x16140000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb25: larb@16141000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16141000 0 0x1000>;
+			mediatek,larb-id = <25>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+				 <&camsys_mraw CLK_CAM_MRAW_LARBX>,
+				 <&camsys CLK_CAM_CAM2MM0_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>;
+		};
+
+		larb26: larb@16142000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16142000 0 0x1000>;
+			mediatek,larb-id = <26>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys_mraw CLK_CAM_MRAW_LARBX>,
+				 <&camsys_mraw CLK_CAM_MRAW_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>;
+
+		};
+
+		ccusys: clock-controller@17200000 {
+			compatible = "mediatek,mt8195-ccusys";
+			reg = <0 0x17200000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb18: larb@17201000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x17201000 0 0x1000>;
+			mediatek,larb-id = <18>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&ccusys CLK_CCU_LARB18>,
+				 <&ccusys CLK_CCU_LARB18>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		video-codec@18000000 {
+			compatible = "mediatek,mt8195-vcodec-dec";
+			mediatek,scp = <&scp>;
+			iommus = <&iommu_vdo M4U_PORT_L21_VDEC_MC_EXT>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			reg = <0 0x18000000 0 0x1000>,
+			      <0 0x18004000 0 0x1000>;
+			ranges = <0 0 0 0x18000000 0 0x26000>;
+
+			video-codec@2000 {
+				compatible = "mediatek,mtk-vcodec-lat-soc";
+				reg = <0 0x2000 0 0x800>;
+				iommus = <&iommu_vpp M4U_PORT_L23_VDEC_UFO_ENC_EXT>,
+					 <&iommu_vpp M4U_PORT_L23_VDEC_RDMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D4>;
+				clock-names = "sel", "vdec", "lat", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+			};
+
+			video-codec@10000 {
+				compatible = "mediatek,mtk-vcodec-lat";
+				reg = <0 0x10000 0 0x800>;
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_VLD_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_VLD2_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_AVC_MC_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_PRED_RD_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_TILE_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_WDMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D4>;
+				clock-names = "sel", "vdec", "lat", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+			};
+
+			video-codec@25000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x25000 0 0x1000>;		/* VDEC_CORE_MISC */
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu_vdo M4U_PORT_L21_VDEC_MC_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_UFO_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PP_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PRED_RD_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PRED_WR_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PPWRAP_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_TILE_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_VLD_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_VLD2_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_AVC_MV_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys CLK_VDEC_VDEC>,
+					 <&vdecsys CLK_VDEC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D4>;
+				clock-names = "sel", "vdec", "lat", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+			};
+		};
+
+		larb24: larb@1800d000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1800d000 0 0x1000>;
+			mediatek,larb-id = <24>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+		};
+
+		larb23: larb@1800e000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1800e000 0 0x1000>;
+			mediatek,larb-id = <23>;
+			mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+		};
+
+		vdecsys_soc: clock-controller@1800f000 {
+			compatible = "mediatek,mt8195-vdecsys_soc";
+			reg = <0 0x1800f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb21: larb@1802e000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1802e000 0 0x1000>;
+			mediatek,larb-id = <21>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdecsys CLK_VDEC_LARB1>,
+				 <&vdecsys CLK_VDEC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+		};
+
+		vdecsys: clock-controller@1802f000 {
+			compatible = "mediatek,mt8195-vdecsys";
+			reg = <0 0x1802f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb22: larb@1803e000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1803e000 0 0x1000>;
+			mediatek,larb-id = <22>;
+			mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+		};
+
+		vdecsys_core1: clock-controller@1803f000 {
+			compatible = "mediatek,mt8195-vdecsys_core1";
+			reg = <0 0x1803f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		apusys_pll: clock-controller@190f3000 {
+			compatible = "mediatek,mt8195-apusys_pll";
+			reg = <0 0x190f3000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8195-vencsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb19: larb@1a010000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			mediatek,larb-id = <19>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vencsys CLK_VENC_VENC>,
+				 <&vencsys CLK_VENC_GALS>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+		};
+
+		venc: video-codec@1a020000 {
+			compatible = "mediatek,mt8195-vcodec-enc";
+			reg = <0 0x1a020000 0 0x10000>;
+			iommus = <&iommu_vdo M4U_PORT_L19_VENC_RCPU>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REC>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_BSDMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_SV_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_RD_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_CHROMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_CHROMA>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,scp = <&scp>;
+			clocks = <&vencsys CLK_VENC_VENC>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+		};
+
+		jpgdec-master {
+			compatible = "mediatek,mt8195-jpgdec";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+			iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			jpgdec@1a040000 {
+				compatible = "mediatek,mt8195-jpgdec-hw";
+				reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys CLK_VENC_JPGDEC>;
+				clock-names = "jpgdec";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+			};
+
+			jpgdec@1a050000 {
+				compatible = "mediatek,mt8195-jpgdec-hw";
+				reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys CLK_VENC_JPGDEC_C1>;
+				clock-names = "jpgdec";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+			};
+
+			jpgdec@1b040000 {
+				compatible = "mediatek,mt8195-jpgdec-hw";
+				reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+				iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>;
+				interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>;
+				clock-names = "jpgdec";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+			};
+		};
+
+		vencsys_core1: clock-controller@1b000000 {
+			compatible = "mediatek,mt8195-vencsys_core1";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdosys0: syscon@1c01a000 {
+			compatible = "mediatek,mt8195-vdosys0", "mediatek,mt8195-mmsys", "syscon";
+			reg = <0 0x1c01a000 0 0x1000>;
+			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
+			#clock-cells = <1>;
+		};
+
+
+		jpgenc-master {
+			compatible = "mediatek,mt8195-jpgenc";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+			iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+					<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+					<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+					<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			jpgenc@1a030000 {
+				compatible = "mediatek,mt8195-jpgenc-hw";
+				reg = <0 0x1a030000 0 0x10000>;
+				iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
+						<&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
+						<&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
+						<&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>;
+				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys CLK_VENC_JPGENC>;
+				clock-names = "jpgenc";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+			};
+
+			jpgenc@1b030000 {
+				compatible = "mediatek,mt8195-jpgenc-hw";
+				reg = <0 0x1b030000 0 0x10000>;
+				iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+						<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+						<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+						<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>;
+				clock-names = "jpgenc";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+			};
+		};
+
+		larb20: larb@1b010000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1b010000 0 0x1000>;
+			mediatek,larb-id = <20>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&vencsys_core1 CLK_VENC_CORE1_VENC>,
+				 <&vencsys_core1 CLK_VENC_CORE1_GALS>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+		};
+
+		ovl0: ovl@1c000000 {
+			compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl";
+			reg = <0 0x1c000000 0 0x1000>;
+			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
+			iommus = <&iommu_vdo M4U_PORT_L0_DISP_OVL0_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>;
+		};
+
+		rdma0: rdma@1c002000 {
+			compatible = "mediatek,mt8195-disp-rdma";
+			reg = <0 0x1c002000 0 0x1000>;
+			interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
+			iommus = <&iommu_vdo M4U_PORT_L0_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
+		};
+
+		color0: color@1c003000 {
+			compatible = "mediatek,mt8195-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x1c003000 0 0x1000>;
+			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>;
+		};
+
+		ccorr0: ccorr@1c004000 {
+			compatible = "mediatek,mt8195-disp-ccorr", "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1c004000 0 0x1000>;
+			interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>;
+		};
+
+		aal0: aal@1c005000 {
+			compatible = "mediatek,mt8195-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x1c005000 0 0x1000>;
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>;
+		};
+
+		gamma0: gamma@1c006000 {
+			compatible = "mediatek,mt8195-disp-gamma", "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1c006000 0 0x1000>;
+			interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>;
+		};
+
+		dither0: dither@1c007000 {
+			compatible = "mediatek,mt8195-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x1c007000 0 0x1000>;
+			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
+		};
+
+		dsc0: dsc@1c009000 {
+			compatible = "mediatek,mt8195-disp-dsc";
+			reg = <0 0x1c009000 0 0x1000>;
+			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
+		};
+
+		merge0: merge@1c014000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c014000 0 0x1000>;
+			interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_VPP_MERGE0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>;
+		};
+
+		dp_intf0: dp-intf@1c015000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c015000 0 0x1000>;
+			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys0  CLK_VDO0_DP_INTF0>,
+				 <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
+			clock-names = "engine", "pixel", "pll";
+			status = "disabled";
+		};
+
+		mutex: mutex@1c016000 {
+			compatible = "mediatek,mt8195-disp-mutex";
+			reg = <0 0x1c016000 0 0x1000>;
+			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
+		};
+
+		larb0: larb@1c018000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c018000 0 0x1000>;
+			mediatek,larb-id = <0>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		larb1: larb@1c019000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c019000 0 0x1000>;
+			mediatek,larb-id = <1>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		vdosys1: syscon@1c100000 {
+			compatible = "mediatek,mt8195-vdosys1", "syscon";
+			reg = <0 0x1c100000 0 0x1000>;
+			mboxes = <&gce0 1 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x0000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		smi_common_vdo: smi@1c01b000 {
+			compatible = "mediatek,mt8195-smi-common-vdo";
+			reg = <0 0x1c01b000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_COMMON>,
+				 <&vdosys0 CLK_VDO0_SMI_EMI>,
+				 <&vdosys0 CLK_VDO0_SMI_RSI>,
+				 <&vdosys0 CLK_VDO0_SMI_GALS>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+
+		};
+
+		iommu_vdo: iommu@1c01f000 {
+			compatible = "mediatek,mt8195-iommu-vdo";
+			reg = <0 0x1c01f000 0 0x1000>;
+			mediatek,larbs = <&larb0 &larb2 &larb5 &larb7 &larb9
+					  &larb10 &larb11 &larb13 &larb17
+					  &larb19 &larb21 &larb24 &larb25
+					  &larb28>;
+			interrupts = <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>;
+			#iommu-cells = <1>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_IOMMU>;
+			clock-names = "bclk";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		mutex1: mutex@1c101000 {
+			compatible = "mediatek,mt8195-disp-mutex";
+			reg = <0 0x1c101000 0 0x1000>;
+			reg-names = "vdo1_mutex";
+			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
+			clock-names = "vdo1_mutex";
+			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
+		};
+
+		larb2: larb@1c102000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c102000 0 0x1000>;
+			mediatek,larb-id = <2>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB2>,
+				 <&vdosys1 CLK_VDO1_SMI_LARB2>,
+				 <&vdosys1 CLK_VDO1_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+		};
+
+		larb3: larb@1c103000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c103000 0 0x1000>;
+			mediatek,larb-id = <3>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB3>,
+				 <&vdosys1 CLK_VDO1_GALS>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+		};
+
+		vdo1_rdma0: dma-controller@1c104000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c104000 0 0x1000>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma1: dma-controller@1c105000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c105000 0 0x1000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA1>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma2: dma-controller@1c106000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c106000 0 0x1000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA2>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma3: dma-controller@1c107000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c107000 0 0x1000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA3>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma4: dma-controller@1c108000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c108000 0 0x1000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA4>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma5: dma-controller@1c109000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c109000 0 0x1000>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA5>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma6: dma-controller@1c10a000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10a000 0 0x1000>;
+			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA6>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma7: dma-controller@1c10b000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10b000 0 0x1000>;
+			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA7>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		merge1: vpp-merge@1c10c000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10c000 0 0x1000>;
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE0_DL_ASYNC>;
+		};
+
+		merge2: vpp-merge@1c10d000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10d000 0 0x1000>;
+			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE1>,
+				 <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE1_DL_ASYNC>;
+		};
+
+		merge3: vpp-merge@1c10e000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10e000 0 0x1000>;
+			interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE2>,
+				 <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE2_DL_ASYNC>;
+		};
+
+		merge4: vpp-merge@1c10f000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10f000 0 0x1000>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE3>,
+				 <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE3_DL_ASYNC>;
+		};
+
+		merge5: vpp-merge@1c110000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c110000 0 0x1000>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
+				 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>;
+			mediatek,merge-fifo-en;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
+		};
+
+		dp_intf1: dp-intf@1c113000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c113000 0 0x1000>;
+			interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
+				 <&vdosys1 CLK_VDO1_DPINTF>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL2>;
+			clock-names = "engine", "pixel", "pll";
+			status = "disabled";
+		};
+
+		ethdr0: hdr-engine@1c114000 {
+			compatible = "mediatek,mt8195-disp-ethdr";
+			reg = <0 0x1c114000 0 0x1000>,
+			      <0 0x1c115000 0 0x1000>,
+			      <0 0x1c117000 0 0x1000>,
+			      <0 0x1c119000 0 0x1000>,
+			      <0 0x1c11a000 0 0x1000>,
+			      <0 0x1c11b000 0 0x1000>,
+			      <0 0x1c11c000 0 0x1000>;
+			reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				    "vdo_be", "adl_ds";
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+				 <&vdosys1 CLK_VDO1_26M_SLOW>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+				 <&topckgen CLK_TOP_ETHDR>;
+			clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				      "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+				      "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
+				      "ethdr_top";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
+				 <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
+			interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
+			resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
+			reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
+				      "gfx_fe1_async", "vdo_be_async";
+		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8195-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8195-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vdec-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_VDEC>;
+
+			trips {
+				vdec_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vdec_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		img-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_IMG>;
+
+			trips {
+				img_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				img_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_CAM0>;
+
+			trips {
+				cam0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_CAM1>;
+
+			trips {
+				cam1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
new file mode 100644
index 0000000000..50cbaefa1a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021-2022 BayLibre, SAS.
+ * Authors:
+ * Fabien Parent <fparent@baylibre.com>
+ * Bernhard Rosenkränzer <bero@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365.dtsi"
+#include "mt6357.dtsi"
+
+/ {
+	model = "MediaTek MT8365 Open Platform EVK";
+	compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-volume-up {
+			gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0xc0000000>;
+	};
+
+	usb_otg_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x30000>;
+		};
+
+		/* 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+	};
+};
+
+&cpu0 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&ethernet {
+	pinctrl-0 = <&ethernet_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy>;
+	phy-mode = "rmii";
+	/*
+	 * Ethernet and HDMI (DSI0) are sharing pins.
+	 * Only one can be enabled at a time and require the physical switch
+	 * SW2101 to be set on LAN position
+	 * mt6357_vibr_reg and mt6357_vsim2_reg are needed to supply ethernet
+	 */
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mmc0 {
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x12012>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&mt6357_vemc_reg>;
+	vqmmc-supply = <&mt6357_vio18_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 76 GPIO_ACTIVE_LOW>;
+	max-frequency = <200000000>;
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	pinctrl-names = "default", "state_uhs";
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	vmmc-supply = <&mt6357_vmch_reg>;
+	vqmmc-supply = <&mt6357_vmc_reg>;
+	status = "okay";
+};
+
+&mt6357_pmic {
+	interrupts-extended = <&pio 145 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
+
+&pio {
+	ethernet_pins: ethernet-pins {
+		phy_reset_pins {
+			pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>;
+		};
+
+		rmii_pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_EXT_TXD0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_EXT_TXD1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_EXT_TXD2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_EXT_TXD3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_EXT_TXC>,
+				 <MT8365_PIN_5_GPIO5__FUNC_EXT_RXER>,
+				 <MT8365_PIN_6_GPIO6__FUNC_EXT_RXC>,
+				 <MT8365_PIN_7_GPIO7__FUNC_EXT_RXDV>,
+				 <MT8365_PIN_8_GPIO8__FUNC_EXT_RXD0>,
+				 <MT8365_PIN_9_GPIO9__FUNC_EXT_RXD1>,
+				 <MT8365_PIN_10_GPIO10__FUNC_EXT_RXD2>,
+				 <MT8365_PIN_11_GPIO11__FUNC_EXT_RXD3>,
+				 <MT8365_PIN_12_GPIO12__FUNC_EXT_TXEN>,
+				 <MT8365_PIN_13_GPIO13__FUNC_EXT_COL>,
+				 <MT8365_PIN_14_GPIO14__FUNC_EXT_MDIO>,
+				 <MT8365_PIN_15_GPIO15__FUNC_EXT_MDC>;
+		};
+	};
+
+	gpio_keys: gpio-keys-pins {
+		pins {
+			pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <MT8365_PIN_57_SDA0__FUNC_SDA0_0>,
+				 <MT8365_PIN_58_SCL0__FUNC_SCL0_0>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		clk-pins {
+			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		clk-pins {
+			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		ds-pins {
+			pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		cd-pins {
+			pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
+			bias-pull-up;
+		};
+
+		clk-pins {
+			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		clk-pins {
+			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
+				 <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
+				 <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
+				 <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
+		};
+	};
+
+	usb_pins: usb-pins {
+		id-pins {
+			pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		usb0-vbus-pins {
+			pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
+			output-high;
+		};
+
+		usb1-vbus-pins {
+			pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
+			output-high;
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		pins {
+			pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
+				 <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
+		};
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ssusb {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	pinctrl-0 = <&usb_pins>;
+	pinctrl-names = "default";
+	usb-role-switch;
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+		type = "micro";
+		vbus-supply = <&usb_otg_vbus>;
+	};
+};
+
+&usb_host {
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
new file mode 100644
index 0000000000..413496c920
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) 2018 MediaTek Inc.
+ * Copyright (C) 2022 BayLibre SAS
+ * Fabien Parent <fparent@baylibre.com>
+ * Bernhard Rosenkränzer <bero@baylibre.com>
+ */
+#include <dt-bindings/clock/mediatek,mt8365-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	compatible = "mediatek,mt8365";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <650000>;
+		};
+
+		opp-918000000 {
+			opp-hz = /bits/ 64 <918000000>;
+			opp-microvolt = <668750>;
+		};
+
+		opp-987000000 {
+			opp-hz = /bits/ 64 <987000000>;
+			opp-microvolt = <687500>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <706250>;
+		};
+
+		opp-1125000000 {
+			opp-hz = /bits/ 64 <1125000000>;
+			opp-microvolt = <725000>;
+		};
+
+		opp-1216000000 {
+			opp-hz = /bits/ 64 <1216000000>;
+			opp-microvolt = <750000>;
+		};
+
+		opp-1308000000 {
+			opp-hz = /bits/ 64 <1308000000>;
+			opp-microvolt = <775000>;
+		};
+
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-1466000000 {
+			opp-hz = /bits/ 64 <1466000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-1533000000 {
+			opp-hz = /bits/ 64 <1533000000>;
+			opp-microvolt = <850000>;
+		};
+
+		opp-1633000000 {
+			opp-hz = /bits/ 64 <1633000000>;
+			opp-microvolt = <887500>;
+		};
+
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <912500>;
+		};
+
+		opp-1767000000 {
+			opp-hz = /bits/ 64 <1767000000>;
+			opp-microvolt = <937500>;
+		};
+
+		opp-1834000000 {
+			opp-hz = /bits/ 64 <1834000000>;
+			opp-microvolt = <962500>;
+		};
+
+		opp-1917000000 {
+			opp-hz = /bits/ 64 <1917000000>;
+			opp-microvolt = <993750>;
+		};
+
+		opp-2001000000 {
+			opp-hz = /bits/ 64 <2001000000>;
+			opp-microvolt = <1025000>;
+		};
+	};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_MCDI: cpu-mcdi {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x00010001>;
+				entry-latency-us = <300>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+
+			CLUSTER_MCDI: cluster-mcdi {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <350>;
+				exit-latency-us = <250>;
+				min-residency-us = <1200>;
+			};
+
+			CLUSTER_DPIDLE: cluster-dpidle {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010004>;
+				entry-latency-us = <300>;
+				exit-latency-us = <800>;
+				min-residency-us = <3300>;
+			};
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+		};
+	};
+
+	clk26m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>, /* GICD */
+			      <0 0x0c080000 0 0x80000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,  /* GICC */
+			      <0 0x0c410000 0 0x1000>,  /* GICH */
+			      <0 0x0c420000 0 0x2000>;  /* GICV */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8365-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8365-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8365-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "mediatek,mt8365-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8365-wdt", "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8365-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8365-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8365-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
+				 <&infracfg CLK_IFR_PMIC_AP>,
+				 <&infracfg CLK_IFR_PWRAP_SYS>,
+				 <&infracfg CLK_IFR_PWRAP_TMR>;
+			clock-names = "spi", "wrap", "sys", "tmr";
+		};
+
+		keypad: keypad@10010000 {
+			compatible = "mediatek,mt6779-keypad";
+			reg = <0 0x10010000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
+		mcucfg: syscon@10200000 {
+			compatible = "mediatek,mt8365-mcucfg", "syscon";
+			reg = <0 0x10200000 0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		sysirq: interrupt-controller@10200a80 {
+			compatible = "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200a80 0 0x20>;
+		};
+
+		infracfg_nao: infracfg@1020e000 {
+			compatible = "mediatek,mt8365-infracfg", "syscon";
+			reg = <0 0x1020e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rng: rng@1020f000 {
+			compatible = "mediatek,mt8365-rng", "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_IFR_TRNG>;
+			clock-names = "rng";
+		};
+
+		apdma: dma-controller@11000280 {
+			compatible = "mediatek,mt8365-uart-dma", "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000280 0 0x80>,
+			      <0 0x11000300 0 0x80>,
+			      <0 0x11000380 0 0x80>,
+			      <0 0x11000400 0 0x80>,
+			      <0 0x11000580 0 0x80>,
+			      <0 0x11000600 0 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <6>;
+			clocks = <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "apdma";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0>, <&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2>, <&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4>, <&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt8365-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_IFR_PWM_HCLK>,
+				 <&infracfg CLK_IFR_PWM>,
+				 <&infracfg CLK_IFR_PWM1>,
+				 <&infracfg CLK_IFR_PWM2>,
+				 <&infracfg CLK_IFR_PWM3>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C0_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C1_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C2_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi";
+			reg = <0 0x1100a000 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_IFR_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C3_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11201000 {
+			compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+				 <&infracfg CLK_IFR_SSUSB_REF>,
+				 <&infracfg CLK_IFR_SSUSB_SYS>,
+				 <&infracfg CLK_IFR_ICUSB>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: usb@11200000 {
+				compatible = "mediatek,mt8365-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+					 <&infracfg CLK_IFR_SSUSB_REF>,
+					 <&infracfg CLK_IFR_SSUSB_SYS>,
+					 <&infracfg CLK_IFR_ICUSB>,
+					 <&infracfg CLK_IFR_SSUSB_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck",
+					      "dma_ck", "xhci_ck";
+				status = "disabled";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11cd0000 0 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+				 <&infracfg CLK_IFR_MSDC0_HCLK>,
+				 <&infracfg CLK_IFR_MSDC0_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c90000 0 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+				 <&infracfg CLK_IFR_MSDC1_HCLK>,
+				 <&infracfg CLK_IFR_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11250000 0 0x1000>,
+			      <0 0x11c60000 0 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>,
+				 <&infracfg CLK_IFR_MSDC2_HCLK>,
+				 <&infracfg CLK_IFR_MSDC2_SRC>,
+				 <&infracfg CLK_IFR_MSDC2_BK>,
+				 <&infracfg CLK_IFR_AP_MSDC0>;
+			clock-names = "source", "hclk", "source_cg",
+				      "bus_clk", "sys_cg";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@112a0000 {
+			compatible = "mediatek,mt8365-eth";
+			reg = <0 0x112a0000 0 0x1000>;
+			mediatek,pericfg = <&infracfg>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_ETH_SEL>,
+				 <&infracfg CLK_IFR_NIC_AXI>,
+				 <&infracfg CLK_IFR_NIC_SLV_AXI>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
+		u3phy: t-phy@11cc0000 {
+			compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11cc0000 0x9000>;
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u2port1: usb-phy@1000 {
+				reg = <0x1000 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	systimer: timer@10017000 {
+		compatible = "mediatek,mt8365-systimer", "mediatek,mt6765-timer";
+		reg = <0 0x10017000 0 0x100>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&system_clk>;
+		clock-names = "clk13m";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h
new file mode 100644
index 0000000000..73339bb48f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h
@@ -0,0 +1,663 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ */
+#ifndef __DTS_MT8516_PINFUNC_H
+#define __DTS_MT8516_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8516_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8516_PIN_0_EINT0__FUNC_PWM_B (MTK_PIN_NO(0) | 1)
+#define MT8516_PIN_0_EINT0__FUNC_I2S2_BCK (MTK_PIN_NO(0) | 3)
+#define MT8516_PIN_0_EINT0__FUNC_EXT_TXD0 (MTK_PIN_NO(0) | 4)
+#define MT8516_PIN_0_EINT0__FUNC_SQICS (MTK_PIN_NO(0) | 6)
+#define MT8516_PIN_0_EINT0__FUNC_DBG_MON_A_6 (MTK_PIN_NO(0) | 7)
+
+#define MT8516_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8516_PIN_1_EINT1__FUNC_PWM_C (MTK_PIN_NO(1) | 1)
+#define MT8516_PIN_1_EINT1__FUNC_I2S2_DI (MTK_PIN_NO(1) | 3)
+#define MT8516_PIN_1_EINT1__FUNC_EXT_TXD1 (MTK_PIN_NO(1) | 4)
+#define MT8516_PIN_1_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(1) | 5)
+#define MT8516_PIN_1_EINT1__FUNC_SQISO (MTK_PIN_NO(1) | 6)
+#define MT8516_PIN_1_EINT1__FUNC_DBG_MON_A_7 (MTK_PIN_NO(1) | 7)
+
+#define MT8516_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8516_PIN_2_EINT2__FUNC_CLKM0 (MTK_PIN_NO(2) | 1)
+#define MT8516_PIN_2_EINT2__FUNC_I2S2_LRCK (MTK_PIN_NO(2) | 3)
+#define MT8516_PIN_2_EINT2__FUNC_EXT_TXD2 (MTK_PIN_NO(2) | 4)
+#define MT8516_PIN_2_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(2) | 5)
+#define MT8516_PIN_2_EINT2__FUNC_SQISI (MTK_PIN_NO(2) | 6)
+#define MT8516_PIN_2_EINT2__FUNC_DBG_MON_A_8 (MTK_PIN_NO(2) | 7)
+
+#define MT8516_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8516_PIN_3_EINT3__FUNC_CLKM1 (MTK_PIN_NO(3) | 1)
+#define MT8516_PIN_3_EINT3__FUNC_SPI_MI (MTK_PIN_NO(3) | 3)
+#define MT8516_PIN_3_EINT3__FUNC_EXT_TXD3 (MTK_PIN_NO(3) | 4)
+#define MT8516_PIN_3_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(3) | 5)
+#define MT8516_PIN_3_EINT3__FUNC_SQIWP (MTK_PIN_NO(3) | 6)
+#define MT8516_PIN_3_EINT3__FUNC_DBG_MON_A_9 (MTK_PIN_NO(3) | 7)
+
+#define MT8516_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8516_PIN_4_EINT4__FUNC_CLKM2 (MTK_PIN_NO(4) | 1)
+#define MT8516_PIN_4_EINT4__FUNC_SPI_MO (MTK_PIN_NO(4) | 3)
+#define MT8516_PIN_4_EINT4__FUNC_EXT_TXC (MTK_PIN_NO(4) | 4)
+#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_TCK (MTK_PIN_NO(4) | 5)
+#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(4) | 6)
+#define MT8516_PIN_4_EINT4__FUNC_DBG_MON_A_10 (MTK_PIN_NO(4) | 7)
+
+#define MT8516_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8516_PIN_5_EINT5__FUNC_UCTS2 (MTK_PIN_NO(5) | 1)
+#define MT8516_PIN_5_EINT5__FUNC_SPI_CSB (MTK_PIN_NO(5) | 3)
+#define MT8516_PIN_5_EINT5__FUNC_EXT_RXER (MTK_PIN_NO(5) | 4)
+#define MT8516_PIN_5_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(5) | 5)
+#define MT8516_PIN_5_EINT5__FUNC_CONN_TEST_CK (MTK_PIN_NO(5) | 6)
+#define MT8516_PIN_5_EINT5__FUNC_DBG_MON_A_11 (MTK_PIN_NO(5) | 7)
+
+#define MT8516_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8516_PIN_6_EINT6__FUNC_URTS2 (MTK_PIN_NO(6) | 1)
+#define MT8516_PIN_6_EINT6__FUNC_SPI_CLK (MTK_PIN_NO(6) | 3)
+#define MT8516_PIN_6_EINT6__FUNC_EXT_RXC (MTK_PIN_NO(6) | 4)
+#define MT8516_PIN_6_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(6) | 5)
+#define MT8516_PIN_6_EINT6__FUNC_DBG_MON_A_12 (MTK_PIN_NO(6) | 7)
+
+#define MT8516_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8516_PIN_7_EINT7__FUNC_SQIRST (MTK_PIN_NO(7) | 1)
+#define MT8516_PIN_7_EINT7__FUNC_SDA1_0 (MTK_PIN_NO(7) | 3)
+#define MT8516_PIN_7_EINT7__FUNC_EXT_RXDV (MTK_PIN_NO(7) | 4)
+#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(7) | 5)
+#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(7) | 6)
+#define MT8516_PIN_7_EINT7__FUNC_DBG_MON_A_13 (MTK_PIN_NO(7) | 7)
+
+#define MT8516_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8516_PIN_8_EINT8__FUNC_SQICK (MTK_PIN_NO(8) | 1)
+#define MT8516_PIN_8_EINT8__FUNC_CLKM3 (MTK_PIN_NO(8) | 2)
+#define MT8516_PIN_8_EINT8__FUNC_SCL1_0 (MTK_PIN_NO(8) | 3)
+#define MT8516_PIN_8_EINT8__FUNC_EXT_RXD0 (MTK_PIN_NO(8) | 4)
+#define MT8516_PIN_8_EINT8__FUNC_ANT_SEL0 (MTK_PIN_NO(8) | 5)
+#define MT8516_PIN_8_EINT8__FUNC_DBG_MON_A_14 (MTK_PIN_NO(8) | 7)
+
+#define MT8516_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8516_PIN_9_EINT9__FUNC_CLKM4 (MTK_PIN_NO(9) | 1)
+#define MT8516_PIN_9_EINT9__FUNC_SDA2_0 (MTK_PIN_NO(9) | 2)
+#define MT8516_PIN_9_EINT9__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT8516_PIN_9_EINT9__FUNC_EXT_RXD1 (MTK_PIN_NO(9) | 4)
+#define MT8516_PIN_9_EINT9__FUNC_ANT_SEL1 (MTK_PIN_NO(9) | 5)
+#define MT8516_PIN_9_EINT9__FUNC_DBG_MON_A_15 (MTK_PIN_NO(9) | 7)
+
+#define MT8516_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8516_PIN_10_EINT10__FUNC_CLKM5 (MTK_PIN_NO(10) | 1)
+#define MT8516_PIN_10_EINT10__FUNC_SCL2_0 (MTK_PIN_NO(10) | 2)
+#define MT8516_PIN_10_EINT10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 3)
+#define MT8516_PIN_10_EINT10__FUNC_EXT_RXD2 (MTK_PIN_NO(10) | 4)
+#define MT8516_PIN_10_EINT10__FUNC_ANT_SEL2 (MTK_PIN_NO(10) | 5)
+#define MT8516_PIN_10_EINT10__FUNC_DBG_MON_A_16 (MTK_PIN_NO(10) | 7)
+
+#define MT8516_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8516_PIN_11_EINT11__FUNC_CLKM4 (MTK_PIN_NO(11) | 1)
+#define MT8516_PIN_11_EINT11__FUNC_PWM_C (MTK_PIN_NO(11) | 2)
+#define MT8516_PIN_11_EINT11__FUNC_CONN_TEST_CK (MTK_PIN_NO(11) | 3)
+#define MT8516_PIN_11_EINT11__FUNC_ANT_SEL3 (MTK_PIN_NO(11) | 4)
+#define MT8516_PIN_11_EINT11__FUNC_EXT_RXD3 (MTK_PIN_NO(11) | 6)
+#define MT8516_PIN_11_EINT11__FUNC_DBG_MON_A_17 (MTK_PIN_NO(11) | 7)
+
+#define MT8516_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8516_PIN_12_EINT12__FUNC_CLKM5 (MTK_PIN_NO(12) | 1)
+#define MT8516_PIN_12_EINT12__FUNC_PWM_A (MTK_PIN_NO(12) | 2)
+#define MT8516_PIN_12_EINT12__FUNC_SPDIF_OUT (MTK_PIN_NO(12) | 3)
+#define MT8516_PIN_12_EINT12__FUNC_ANT_SEL4 (MTK_PIN_NO(12) | 4)
+#define MT8516_PIN_12_EINT12__FUNC_EXT_TXEN (MTK_PIN_NO(12) | 6)
+#define MT8516_PIN_12_EINT12__FUNC_DBG_MON_A_18 (MTK_PIN_NO(12) | 7)
+
+#define MT8516_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8516_PIN_13_EINT13__FUNC_TSF_IN (MTK_PIN_NO(13) | 3)
+#define MT8516_PIN_13_EINT13__FUNC_ANT_SEL5 (MTK_PIN_NO(13) | 4)
+#define MT8516_PIN_13_EINT13__FUNC_SPDIF_IN (MTK_PIN_NO(13) | 6)
+#define MT8516_PIN_13_EINT13__FUNC_DBG_MON_A_19 (MTK_PIN_NO(13) | 7)
+
+#define MT8516_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8516_PIN_14_EINT14__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(14) | 2)
+#define MT8516_PIN_14_EINT14__FUNC_TDM_RX_MCK (MTK_PIN_NO(14) | 3)
+#define MT8516_PIN_14_EINT14__FUNC_ANT_SEL1 (MTK_PIN_NO(14) | 4)
+#define MT8516_PIN_14_EINT14__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(14) | 5)
+#define MT8516_PIN_14_EINT14__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8516_PIN_14_EINT14__FUNC_DBG_MON_B_8 (MTK_PIN_NO(14) | 7)
+
+#define MT8516_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8516_PIN_15_EINT15__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(15) | 2)
+#define MT8516_PIN_15_EINT15__FUNC_TDM_RX_BCK (MTK_PIN_NO(15) | 3)
+#define MT8516_PIN_15_EINT15__FUNC_ANT_SEL2 (MTK_PIN_NO(15) | 4)
+#define MT8516_PIN_15_EINT15__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(15) | 5)
+#define MT8516_PIN_15_EINT15__FUNC_NCEB1 (MTK_PIN_NO(15) | 6)
+#define MT8516_PIN_15_EINT15__FUNC_DBG_MON_B_9 (MTK_PIN_NO(15) | 7)
+
+#define MT8516_PIN_16_EINT16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8516_PIN_16_EINT16__FUNC_I2S_8CH_BCK (MTK_PIN_NO(16) | 2)
+#define MT8516_PIN_16_EINT16__FUNC_TDM_RX_LRCK (MTK_PIN_NO(16) | 3)
+#define MT8516_PIN_16_EINT16__FUNC_ANT_SEL3 (MTK_PIN_NO(16) | 4)
+#define MT8516_PIN_16_EINT16__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(16) | 5)
+#define MT8516_PIN_16_EINT16__FUNC_NCEB0 (MTK_PIN_NO(16) | 6)
+#define MT8516_PIN_16_EINT16__FUNC_DBG_MON_B_10 (MTK_PIN_NO(16) | 7)
+
+#define MT8516_PIN_17_EINT17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8516_PIN_17_EINT17__FUNC_I2S_8CH_MCK (MTK_PIN_NO(17) | 2)
+#define MT8516_PIN_17_EINT17__FUNC_TDM_RX_DI (MTK_PIN_NO(17) | 3)
+#define MT8516_PIN_17_EINT17__FUNC_IDDIG (MTK_PIN_NO(17) | 4)
+#define MT8516_PIN_17_EINT17__FUNC_ANT_SEL4 (MTK_PIN_NO(17) | 5)
+#define MT8516_PIN_17_EINT17__FUNC_NREB (MTK_PIN_NO(17) | 6)
+#define MT8516_PIN_17_EINT17__FUNC_DBG_MON_B_11 (MTK_PIN_NO(17) | 7)
+
+#define MT8516_PIN_18_EINT18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8516_PIN_18_EINT18__FUNC_USB_DRVVBUS (MTK_PIN_NO(18) | 2)
+#define MT8516_PIN_18_EINT18__FUNC_I2S3_LRCK (MTK_PIN_NO(18) | 3)
+#define MT8516_PIN_18_EINT18__FUNC_CLKM1 (MTK_PIN_NO(18) | 4)
+#define MT8516_PIN_18_EINT18__FUNC_ANT_SEL3 (MTK_PIN_NO(18) | 5)
+#define MT8516_PIN_18_EINT18__FUNC_I2S2_BCK (MTK_PIN_NO(18) | 6)
+#define MT8516_PIN_18_EINT18__FUNC_DBG_MON_A_20 (MTK_PIN_NO(18) | 7)
+
+#define MT8516_PIN_19_EINT19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8516_PIN_19_EINT19__FUNC_UCTS1 (MTK_PIN_NO(19) | 1)
+#define MT8516_PIN_19_EINT19__FUNC_IDDIG (MTK_PIN_NO(19) | 2)
+#define MT8516_PIN_19_EINT19__FUNC_I2S3_BCK (MTK_PIN_NO(19) | 3)
+#define MT8516_PIN_19_EINT19__FUNC_CLKM2 (MTK_PIN_NO(19) | 4)
+#define MT8516_PIN_19_EINT19__FUNC_ANT_SEL4 (MTK_PIN_NO(19) | 5)
+#define MT8516_PIN_19_EINT19__FUNC_I2S2_DI (MTK_PIN_NO(19) | 6)
+#define MT8516_PIN_19_EINT19__FUNC_DBG_MON_A_21 (MTK_PIN_NO(19) | 7)
+
+#define MT8516_PIN_20_EINT20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8516_PIN_20_EINT20__FUNC_URTS1 (MTK_PIN_NO(20) | 1)
+#define MT8516_PIN_20_EINT20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 3)
+#define MT8516_PIN_20_EINT20__FUNC_CLKM3 (MTK_PIN_NO(20) | 4)
+#define MT8516_PIN_20_EINT20__FUNC_ANT_SEL5 (MTK_PIN_NO(20) | 5)
+#define MT8516_PIN_20_EINT20__FUNC_I2S2_LRCK (MTK_PIN_NO(20) | 6)
+#define MT8516_PIN_20_EINT20__FUNC_DBG_MON_A_22 (MTK_PIN_NO(20) | 7)
+
+#define MT8516_PIN_21_EINT21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8516_PIN_21_EINT21__FUNC_NRNB (MTK_PIN_NO(21) | 1)
+#define MT8516_PIN_21_EINT21__FUNC_ANT_SEL0 (MTK_PIN_NO(21) | 2)
+#define MT8516_PIN_21_EINT21__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(21) | 3)
+#define MT8516_PIN_21_EINT21__FUNC_DBG_MON_B_31 (MTK_PIN_NO(21) | 7)
+
+#define MT8516_PIN_22_EINT22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8516_PIN_22_EINT22__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(22) | 2)
+#define MT8516_PIN_22_EINT22__FUNC_TSF_IN (MTK_PIN_NO(22) | 3)
+#define MT8516_PIN_22_EINT22__FUNC_USB_DRVVBUS (MTK_PIN_NO(22) | 4)
+#define MT8516_PIN_22_EINT22__FUNC_SPDIF_OUT (MTK_PIN_NO(22) | 5)
+#define MT8516_PIN_22_EINT22__FUNC_NRE_C (MTK_PIN_NO(22) | 6)
+#define MT8516_PIN_22_EINT22__FUNC_DBG_MON_B_12 (MTK_PIN_NO(22) | 7)
+
+#define MT8516_PIN_23_EINT23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8516_PIN_23_EINT23__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(23) | 2)
+#define MT8516_PIN_23_EINT23__FUNC_CLKM0 (MTK_PIN_NO(23) | 3)
+#define MT8516_PIN_23_EINT23__FUNC_IR (MTK_PIN_NO(23) | 4)
+#define MT8516_PIN_23_EINT23__FUNC_SPDIF_IN (MTK_PIN_NO(23) | 5)
+#define MT8516_PIN_23_EINT23__FUNC_NDQS_C (MTK_PIN_NO(23) | 6)
+#define MT8516_PIN_23_EINT23__FUNC_DBG_MON_B_13 (MTK_PIN_NO(23) | 7)
+
+#define MT8516_PIN_24_EINT24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8516_PIN_24_EINT24__FUNC_ANT_SEL1 (MTK_PIN_NO(24) | 3)
+#define MT8516_PIN_24_EINT24__FUNC_UCTS2 (MTK_PIN_NO(24) | 4)
+#define MT8516_PIN_24_EINT24__FUNC_PWM_A (MTK_PIN_NO(24) | 5)
+#define MT8516_PIN_24_EINT24__FUNC_I2S0_MCK (MTK_PIN_NO(24) | 6)
+#define MT8516_PIN_24_EINT24__FUNC_DBG_MON_A_0 (MTK_PIN_NO(24) | 7)
+
+#define MT8516_PIN_25_EINT25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8516_PIN_25_EINT25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 3)
+#define MT8516_PIN_25_EINT25__FUNC_URTS2 (MTK_PIN_NO(25) | 4)
+#define MT8516_PIN_25_EINT25__FUNC_PWM_B (MTK_PIN_NO(25) | 5)
+#define MT8516_PIN_25_EINT25__FUNC_I2S_8CH_MCK (MTK_PIN_NO(25) | 6)
+#define MT8516_PIN_25_EINT25__FUNC_DBG_MON_A_1 (MTK_PIN_NO(25) | 7)
+
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(26) | 1)
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(26) | 2)
+
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(27) | 1)
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(27) | 2)
+
+#define MT8516_PIN_28_PWRAP_INT__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S0_MCK (MTK_PIN_NO(28) | 1)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S_8CH_MCK (MTK_PIN_NO(28) | 4)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S2_MCK (MTK_PIN_NO(28) | 5)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S3_MCK (MTK_PIN_NO(28) | 6)
+
+#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(29) | 1)
+
+#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(30) | 1)
+
+#define MT8516_PIN_31_RTC32K_CK__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8516_PIN_31_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(31) | 1)
+
+#define MT8516_PIN_32_WATCHDOG__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8516_PIN_32_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(32) | 1)
+
+#define MT8516_PIN_33_SRCLKENA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8516_PIN_33_SRCLKENA__FUNC_SRCLKENA0 (MTK_PIN_NO(33) | 1)
+
+#define MT8516_PIN_34_URXD2__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8516_PIN_34_URXD2__FUNC_URXD2 (MTK_PIN_NO(34) | 1)
+#define MT8516_PIN_34_URXD2__FUNC_UTXD2 (MTK_PIN_NO(34) | 3)
+#define MT8516_PIN_34_URXD2__FUNC_DBG_SCL (MTK_PIN_NO(34) | 4)
+#define MT8516_PIN_34_URXD2__FUNC_I2S2_MCK (MTK_PIN_NO(34) | 6)
+#define MT8516_PIN_34_URXD2__FUNC_DBG_MON_B_0 (MTK_PIN_NO(34) | 7)
+
+#define MT8516_PIN_35_UTXD2__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8516_PIN_35_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(35) | 1)
+#define MT8516_PIN_35_UTXD2__FUNC_URXD2 (MTK_PIN_NO(35) | 3)
+#define MT8516_PIN_35_UTXD2__FUNC_DBG_SDA (MTK_PIN_NO(35) | 4)
+#define MT8516_PIN_35_UTXD2__FUNC_I2S3_MCK (MTK_PIN_NO(35) | 6)
+#define MT8516_PIN_35_UTXD2__FUNC_DBG_MON_B_1 (MTK_PIN_NO(35) | 7)
+
+#define MT8516_PIN_36_MRG_CLK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8516_PIN_36_MRG_CLK__FUNC_MRG_CLK (MTK_PIN_NO(36) | 1)
+#define MT8516_PIN_36_MRG_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(36) | 3)
+#define MT8516_PIN_36_MRG_CLK__FUNC_I2S3_BCK (MTK_PIN_NO(36) | 4)
+#define MT8516_PIN_36_MRG_CLK__FUNC_PCM0_CLK (MTK_PIN_NO(36) | 5)
+#define MT8516_PIN_36_MRG_CLK__FUNC_IR (MTK_PIN_NO(36) | 6)
+#define MT8516_PIN_36_MRG_CLK__FUNC_DBG_MON_A_2 (MTK_PIN_NO(36) | 7)
+
+#define MT8516_PIN_37_MRG_SYNC__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(37) | 1)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S0_LRCK (MTK_PIN_NO(37) | 3)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S3_LRCK (MTK_PIN_NO(37) | 4)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(37) | 5)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_EXT_COL (MTK_PIN_NO(37) | 6)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_DBG_MON_A_3 (MTK_PIN_NO(37) | 7)
+
+#define MT8516_PIN_38_MRG_DI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8516_PIN_38_MRG_DI__FUNC_MRG_DI (MTK_PIN_NO(38) | 1)
+#define MT8516_PIN_38_MRG_DI__FUNC_I2S0_DI (MTK_PIN_NO(38) | 3)
+#define MT8516_PIN_38_MRG_DI__FUNC_I2S3_DO (MTK_PIN_NO(38) | 4)
+#define MT8516_PIN_38_MRG_DI__FUNC_PCM0_DI (MTK_PIN_NO(38) | 5)
+#define MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO (MTK_PIN_NO(38) | 6)
+#define MT8516_PIN_38_MRG_DI__FUNC_DBG_MON_A_4 (MTK_PIN_NO(38) | 7)
+
+#define MT8516_PIN_39_MRG_DO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8516_PIN_39_MRG_DO__FUNC_MRG_DO (MTK_PIN_NO(39) | 1)
+#define MT8516_PIN_39_MRG_DO__FUNC_I2S0_MCK (MTK_PIN_NO(39) | 3)
+#define MT8516_PIN_39_MRG_DO__FUNC_I2S3_MCK (MTK_PIN_NO(39) | 4)
+#define MT8516_PIN_39_MRG_DO__FUNC_PCM0_DO (MTK_PIN_NO(39) | 5)
+#define MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC (MTK_PIN_NO(39) | 6)
+#define MT8516_PIN_39_MRG_DO__FUNC_DBG_MON_A_5 (MTK_PIN_NO(39) | 7)
+
+#define MT8516_PIN_40_KPROW0__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8516_PIN_40_KPROW0__FUNC_KPROW0 (MTK_PIN_NO(40) | 1)
+#define MT8516_PIN_40_KPROW0__FUNC_DBG_MON_B_4 (MTK_PIN_NO(40) | 7)
+
+#define MT8516_PIN_41_KPROW1__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8516_PIN_41_KPROW1__FUNC_KPROW1 (MTK_PIN_NO(41) | 1)
+#define MT8516_PIN_41_KPROW1__FUNC_IDDIG (MTK_PIN_NO(41) | 2)
+#define MT8516_PIN_41_KPROW1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 3)
+#define MT8516_PIN_41_KPROW1__FUNC_DBG_MON_B_5 (MTK_PIN_NO(41) | 7)
+
+#define MT8516_PIN_42_KPCOL0__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8516_PIN_42_KPCOL0__FUNC_KPCOL0 (MTK_PIN_NO(42) | 1)
+#define MT8516_PIN_42_KPCOL0__FUNC_DBG_MON_B_6 (MTK_PIN_NO(42) | 7)
+
+#define MT8516_PIN_43_KPCOL1__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8516_PIN_43_KPCOL1__FUNC_KPCOL1 (MTK_PIN_NO(43) | 1)
+#define MT8516_PIN_43_KPCOL1__FUNC_USB_DRVVBUS (MTK_PIN_NO(43) | 2)
+#define MT8516_PIN_43_KPCOL1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(43) | 3)
+#define MT8516_PIN_43_KPCOL1__FUNC_TSF_IN (MTK_PIN_NO(43) | 4)
+#define MT8516_PIN_43_KPCOL1__FUNC_DBG_MON_B_7 (MTK_PIN_NO(43) | 7)
+
+#define MT8516_PIN_44_JTMS__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8516_PIN_44_JTMS__FUNC_JTMS (MTK_PIN_NO(44) | 1)
+#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(44) | 2)
+#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(44) | 3)
+#define MT8516_PIN_44_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(44) | 5)
+#define MT8516_PIN_44_JTMS__FUNC_UDI_TMS_XI (MTK_PIN_NO(44) | 6)
+
+#define MT8516_PIN_45_JTCK__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8516_PIN_45_JTCK__FUNC_JTCK (MTK_PIN_NO(45) | 1)
+#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_TCK (MTK_PIN_NO(45) | 2)
+#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(45) | 3)
+
+#define MT8516_PIN_46_JTDI__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8516_PIN_46_JTDI__FUNC_JTDI (MTK_PIN_NO(46) | 1)
+#define MT8516_PIN_46_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(46) | 2)
+
+#define MT8516_PIN_47_JTDO__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8516_PIN_47_JTDO__FUNC_JTDO (MTK_PIN_NO(47) | 1)
+#define MT8516_PIN_47_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(47) | 2)
+
+#define MT8516_PIN_48_SPI_CS__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8516_PIN_48_SPI_CS__FUNC_SPI_CSB (MTK_PIN_NO(48) | 1)
+#define MT8516_PIN_48_SPI_CS__FUNC_I2S0_DI (MTK_PIN_NO(48) | 3)
+#define MT8516_PIN_48_SPI_CS__FUNC_I2S2_BCK (MTK_PIN_NO(48) | 4)
+#define MT8516_PIN_48_SPI_CS__FUNC_DBG_MON_A_23 (MTK_PIN_NO(48) | 7)
+
+#define MT8516_PIN_49_SPI_CK__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8516_PIN_49_SPI_CK__FUNC_SPI_CLK (MTK_PIN_NO(49) | 1)
+#define MT8516_PIN_49_SPI_CK__FUNC_I2S0_LRCK (MTK_PIN_NO(49) | 3)
+#define MT8516_PIN_49_SPI_CK__FUNC_I2S2_DI (MTK_PIN_NO(49) | 4)
+#define MT8516_PIN_49_SPI_CK__FUNC_DBG_MON_A_24 (MTK_PIN_NO(49) | 7)
+
+#define MT8516_PIN_50_SPI_MI__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MI (MTK_PIN_NO(50) | 1)
+#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MO (MTK_PIN_NO(50) | 2)
+#define MT8516_PIN_50_SPI_MI__FUNC_I2S0_BCK (MTK_PIN_NO(50) | 3)
+#define MT8516_PIN_50_SPI_MI__FUNC_I2S2_LRCK (MTK_PIN_NO(50) | 4)
+#define MT8516_PIN_50_SPI_MI__FUNC_DBG_MON_A_25 (MTK_PIN_NO(50) | 7)
+
+#define MT8516_PIN_51_SPI_MO__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MO (MTK_PIN_NO(51) | 1)
+#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MI (MTK_PIN_NO(51) | 2)
+#define MT8516_PIN_51_SPI_MO__FUNC_I2S0_MCK (MTK_PIN_NO(51) | 3)
+#define MT8516_PIN_51_SPI_MO__FUNC_I2S2_MCK (MTK_PIN_NO(51) | 4)
+#define MT8516_PIN_51_SPI_MO__FUNC_DBG_MON_A_26 (MTK_PIN_NO(51) | 7)
+
+#define MT8516_PIN_52_SDA1__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8516_PIN_52_SDA1__FUNC_SDA1_0 (MTK_PIN_NO(52) | 1)
+
+#define MT8516_PIN_53_SCL1__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8516_PIN_53_SCL1__FUNC_SCL1_0 (MTK_PIN_NO(53) | 1)
+
+#define MT8516_PIN_54_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8516_PIN_54_GPIO54__FUNC_PWM_B (MTK_PIN_NO(54) | 2)
+#define MT8516_PIN_54_GPIO54__FUNC_DBG_MON_B_2 (MTK_PIN_NO(54) | 7)
+
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S0_DI (MTK_PIN_NO(55) | 1)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_UCTS0 (MTK_PIN_NO(55) | 2)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S3_DO (MTK_PIN_NO(55) | 3)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(55) | 4)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_PWM_A (MTK_PIN_NO(55) | 5)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S2_BCK (MTK_PIN_NO(55) | 6)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_DBG_MON_A_28 (MTK_PIN_NO(55) | 7)
+
+#define MT8516_PIN_56_I2S_LRCK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(56) | 1)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S3_LRCK (MTK_PIN_NO(56) | 3)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(56) | 4)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_PWM_B (MTK_PIN_NO(56) | 5)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S2_DI (MTK_PIN_NO(56) | 6)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_DBG_MON_A_29 (MTK_PIN_NO(56) | 7)
+
+#define MT8516_PIN_57_I2S_BCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(57) | 1)
+#define MT8516_PIN_57_I2S_BCK__FUNC_URTS0 (MTK_PIN_NO(57) | 2)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S3_BCK (MTK_PIN_NO(57) | 3)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S_8CH_BCK (MTK_PIN_NO(57) | 4)
+#define MT8516_PIN_57_I2S_BCK__FUNC_PWM_C (MTK_PIN_NO(57) | 5)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S2_LRCK (MTK_PIN_NO(57) | 6)
+#define MT8516_PIN_57_I2S_BCK__FUNC_DBG_MON_A_30 (MTK_PIN_NO(57) | 7)
+
+#define MT8516_PIN_58_SDA0__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8516_PIN_58_SDA0__FUNC_SDA0_0 (MTK_PIN_NO(58) | 1)
+
+#define MT8516_PIN_59_SCL0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8516_PIN_59_SCL0__FUNC_SCL0_0 (MTK_PIN_NO(59) | 1)
+
+#define MT8516_PIN_60_SDA2__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8516_PIN_60_SDA2__FUNC_SDA2_0 (MTK_PIN_NO(60) | 1)
+#define MT8516_PIN_60_SDA2__FUNC_PWM_B (MTK_PIN_NO(60) | 2)
+
+#define MT8516_PIN_61_SCL2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8516_PIN_61_SCL2__FUNC_SCL2_0 (MTK_PIN_NO(61) | 1)
+#define MT8516_PIN_61_SCL2__FUNC_PWM_C (MTK_PIN_NO(61) | 2)
+
+#define MT8516_PIN_62_URXD0__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8516_PIN_62_URXD0__FUNC_URXD0 (MTK_PIN_NO(62) | 1)
+#define MT8516_PIN_62_URXD0__FUNC_UTXD0 (MTK_PIN_NO(62) | 2)
+
+#define MT8516_PIN_63_UTXD0__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8516_PIN_63_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(63) | 1)
+#define MT8516_PIN_63_UTXD0__FUNC_URXD0 (MTK_PIN_NO(63) | 2)
+
+#define MT8516_PIN_64_URXD1__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8516_PIN_64_URXD1__FUNC_URXD1 (MTK_PIN_NO(64) | 1)
+#define MT8516_PIN_64_URXD1__FUNC_UTXD1 (MTK_PIN_NO(64) | 2)
+#define MT8516_PIN_64_URXD1__FUNC_DBG_MON_A_27 (MTK_PIN_NO(64) | 7)
+
+#define MT8516_PIN_65_UTXD1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8516_PIN_65_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(65) | 1)
+#define MT8516_PIN_65_UTXD1__FUNC_URXD1 (MTK_PIN_NO(65) | 2)
+#define MT8516_PIN_65_UTXD1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(65) | 7)
+
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(68) | 1)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(68) | 2)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_SDA1_0 (MTK_PIN_NO(68) | 3)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_USB_SDA (MTK_PIN_NO(68) | 5)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S3_BCK (MTK_PIN_NO(68) | 6)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_DBG_MON_B_15 (MTK_PIN_NO(68) | 7)
+
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(69) | 1)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(69) | 2)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_SCL1_0 (MTK_PIN_NO(69) | 3)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_USB_SCL (MTK_PIN_NO(69) | 5)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S3_LRCK (MTK_PIN_NO(69) | 6)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_DBG_MON_B_16 (MTK_PIN_NO(69) | 7)
+
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(70) | 1)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(70) | 2)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_UTXD0 (MTK_PIN_NO(70) | 5)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S3_DO (MTK_PIN_NO(70) | 6)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(70) | 7)
+
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(71) | 1)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(71) | 2)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_A (MTK_PIN_NO(71) | 3)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S3_MCK (MTK_PIN_NO(71) | 4)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_URXD0 (MTK_PIN_NO(71) | 5)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_B (MTK_PIN_NO(71) | 6)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_DBG_MON_B_18 (MTK_PIN_NO(71) | 7)
+
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(72) | 1)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(72) | 2)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_SDA2_0 (MTK_PIN_NO(72) | 3)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_UTXD1 (MTK_PIN_NO(72) | 5)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_PWM_C (MTK_PIN_NO(72) | 6)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_DBG_MON_B_19 (MTK_PIN_NO(72) | 7)
+
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(73) | 1)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_I2S_8CH_BCK (MTK_PIN_NO(73) | 2)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_SCL2_0 (MTK_PIN_NO(73) | 3)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(73) | 4)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_URXD1 (MTK_PIN_NO(73) | 5)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_PWM_A (MTK_PIN_NO(73) | 6)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_DBG_MON_B_20 (MTK_PIN_NO(73) | 7)
+
+#define MT8516_PIN_74_TDN3__FUNC_GPI74 (MTK_PIN_NO(74) | 0)
+#define MT8516_PIN_74_TDN3__FUNC_TDN3 (MTK_PIN_NO(74) | 1)
+
+#define MT8516_PIN_75_TDP3__FUNC_GPI75 (MTK_PIN_NO(75) | 0)
+#define MT8516_PIN_75_TDP3__FUNC_TDP3 (MTK_PIN_NO(75) | 1)
+
+#define MT8516_PIN_76_TDN2__FUNC_GPI76 (MTK_PIN_NO(76) | 0)
+#define MT8516_PIN_76_TDN2__FUNC_TDN2 (MTK_PIN_NO(76) | 1)
+
+#define MT8516_PIN_77_TDP2__FUNC_GPI77 (MTK_PIN_NO(77) | 0)
+#define MT8516_PIN_77_TDP2__FUNC_TDP2 (MTK_PIN_NO(77) | 1)
+
+#define MT8516_PIN_78_TCN__FUNC_GPI78 (MTK_PIN_NO(78) | 0)
+#define MT8516_PIN_78_TCN__FUNC_TCN (MTK_PIN_NO(78) | 1)
+
+#define MT8516_PIN_79_TCP__FUNC_GPI79 (MTK_PIN_NO(79) | 0)
+#define MT8516_PIN_79_TCP__FUNC_TCP (MTK_PIN_NO(79) | 1)
+
+#define MT8516_PIN_80_TDN1__FUNC_GPI80 (MTK_PIN_NO(80) | 0)
+#define MT8516_PIN_80_TDN1__FUNC_TDN1 (MTK_PIN_NO(80) | 1)
+
+#define MT8516_PIN_81_TDP1__FUNC_GPI81 (MTK_PIN_NO(81) | 0)
+#define MT8516_PIN_81_TDP1__FUNC_TDP1 (MTK_PIN_NO(81) | 1)
+
+#define MT8516_PIN_82_TDN0__FUNC_GPI82 (MTK_PIN_NO(82) | 0)
+#define MT8516_PIN_82_TDN0__FUNC_TDN0 (MTK_PIN_NO(82) | 1)
+
+#define MT8516_PIN_83_TDP0__FUNC_GPI83 (MTK_PIN_NO(83) | 0)
+#define MT8516_PIN_83_TDP0__FUNC_TDP0 (MTK_PIN_NO(83) | 1)
+
+#define MT8516_PIN_84_RDN0__FUNC_GPI84 (MTK_PIN_NO(84) | 0)
+#define MT8516_PIN_84_RDN0__FUNC_RDN0 (MTK_PIN_NO(84) | 1)
+
+#define MT8516_PIN_85_RDP0__FUNC_GPI85 (MTK_PIN_NO(85) | 0)
+#define MT8516_PIN_85_RDP0__FUNC_RDP0 (MTK_PIN_NO(85) | 1)
+
+#define MT8516_PIN_86_RDN1__FUNC_GPI86 (MTK_PIN_NO(86) | 0)
+#define MT8516_PIN_86_RDN1__FUNC_RDN1 (MTK_PIN_NO(86) | 1)
+
+#define MT8516_PIN_87_RDP1__FUNC_GPI87 (MTK_PIN_NO(87) | 0)
+#define MT8516_PIN_87_RDP1__FUNC_RDP1 (MTK_PIN_NO(87) | 1)
+
+#define MT8516_PIN_88_RCN__FUNC_GPI88 (MTK_PIN_NO(88) | 0)
+#define MT8516_PIN_88_RCN__FUNC_RCN (MTK_PIN_NO(88) | 1)
+
+#define MT8516_PIN_89_RCP__FUNC_GPI89 (MTK_PIN_NO(89) | 0)
+#define MT8516_PIN_89_RCP__FUNC_RCP (MTK_PIN_NO(89) | 1)
+
+#define MT8516_PIN_90_RDN2__FUNC_GPI90 (MTK_PIN_NO(90) | 0)
+#define MT8516_PIN_90_RDN2__FUNC_RDN2 (MTK_PIN_NO(90) | 1)
+#define MT8516_PIN_90_RDN2__FUNC_CMDAT8 (MTK_PIN_NO(90) | 2)
+
+#define MT8516_PIN_91_RDP2__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT8516_PIN_91_RDP2__FUNC_RDP2 (MTK_PIN_NO(91) | 1)
+#define MT8516_PIN_91_RDP2__FUNC_CMDAT9 (MTK_PIN_NO(91) | 2)
+
+#define MT8516_PIN_92_RDN3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT8516_PIN_92_RDN3__FUNC_RDN3 (MTK_PIN_NO(92) | 1)
+#define MT8516_PIN_92_RDN3__FUNC_CMDAT4 (MTK_PIN_NO(92) | 2)
+
+#define MT8516_PIN_93_RDP3__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT8516_PIN_93_RDP3__FUNC_RDP3 (MTK_PIN_NO(93) | 1)
+#define MT8516_PIN_93_RDP3__FUNC_CMDAT5 (MTK_PIN_NO(93) | 2)
+
+#define MT8516_PIN_94_RCN_A__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT8516_PIN_94_RCN_A__FUNC_RCN_A (MTK_PIN_NO(94) | 1)
+#define MT8516_PIN_94_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(94) | 2)
+
+#define MT8516_PIN_95_RCP_A__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT8516_PIN_95_RCP_A__FUNC_RCP_A (MTK_PIN_NO(95) | 1)
+#define MT8516_PIN_95_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(95) | 2)
+
+#define MT8516_PIN_96_RDN1_A__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT8516_PIN_96_RDN1_A__FUNC_RDN1_A (MTK_PIN_NO(96) | 1)
+#define MT8516_PIN_96_RDN1_A__FUNC_CMDAT2 (MTK_PIN_NO(96) | 2)
+#define MT8516_PIN_96_RDN1_A__FUNC_CMCSD2 (MTK_PIN_NO(96) | 3)
+
+#define MT8516_PIN_97_RDP1_A__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT8516_PIN_97_RDP1_A__FUNC_RDP1_A (MTK_PIN_NO(97) | 1)
+#define MT8516_PIN_97_RDP1_A__FUNC_CMDAT3 (MTK_PIN_NO(97) | 2)
+#define MT8516_PIN_97_RDP1_A__FUNC_CMCSD3 (MTK_PIN_NO(97) | 3)
+
+#define MT8516_PIN_98_RDN0_A__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT8516_PIN_98_RDN0_A__FUNC_RDN0_A (MTK_PIN_NO(98) | 1)
+#define MT8516_PIN_98_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(98) | 2)
+
+#define MT8516_PIN_99_RDP0_A__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT8516_PIN_99_RDP0_A__FUNC_RDP0_A (MTK_PIN_NO(99) | 1)
+#define MT8516_PIN_99_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(99) | 2)
+
+#define MT8516_PIN_100_CMDAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8516_PIN_100_CMDAT0__FUNC_CMDAT0 (MTK_PIN_NO(100) | 1)
+#define MT8516_PIN_100_CMDAT0__FUNC_CMCSD0 (MTK_PIN_NO(100) | 2)
+#define MT8516_PIN_100_CMDAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(100) | 3)
+#define MT8516_PIN_100_CMDAT0__FUNC_TDM_RX_MCK (MTK_PIN_NO(100) | 5)
+#define MT8516_PIN_100_CMDAT0__FUNC_DBG_MON_B_21 (MTK_PIN_NO(100) | 7)
+
+#define MT8516_PIN_101_CMDAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMDAT1 (MTK_PIN_NO(101) | 1)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMCSD1 (MTK_PIN_NO(101) | 2)
+#define MT8516_PIN_101_CMDAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(101) | 3)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMFLASH (MTK_PIN_NO(101) | 4)
+#define MT8516_PIN_101_CMDAT1__FUNC_TDM_RX_BCK (MTK_PIN_NO(101) | 5)
+#define MT8516_PIN_101_CMDAT1__FUNC_DBG_MON_B_22 (MTK_PIN_NO(101) | 7)
+
+#define MT8516_PIN_102_CMMCLK__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8516_PIN_102_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(102) | 1)
+#define MT8516_PIN_102_CMMCLK__FUNC_ANT_SEL4 (MTK_PIN_NO(102) | 3)
+#define MT8516_PIN_102_CMMCLK__FUNC_TDM_RX_LRCK (MTK_PIN_NO(102) | 5)
+#define MT8516_PIN_102_CMMCLK__FUNC_DBG_MON_B_23 (MTK_PIN_NO(102) | 7)
+
+#define MT8516_PIN_103_CMPCLK__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8516_PIN_103_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(103) | 1)
+#define MT8516_PIN_103_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(103) | 2)
+#define MT8516_PIN_103_CMPCLK__FUNC_ANT_SEL5 (MTK_PIN_NO(103) | 3)
+#define MT8516_PIN_103_CMPCLK__FUNC_TDM_RX_DI (MTK_PIN_NO(103) | 5)
+#define MT8516_PIN_103_CMPCLK__FUNC_DBG_MON_B_24 (MTK_PIN_NO(103) | 7)
+
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(104) | 1)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_SQICS (MTK_PIN_NO(104) | 4)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_DBG_MON_B_25 (MTK_PIN_NO(104) | 7)
+
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(105) | 1)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_SQISO (MTK_PIN_NO(105) | 4)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_DBG_MON_B_26 (MTK_PIN_NO(105) | 7)
+
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(106) | 1)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_SQISI (MTK_PIN_NO(106) | 4)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_DBG_MON_B_27 (MTK_PIN_NO(106) | 7)
+
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(107) | 1)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_SQIWP (MTK_PIN_NO(107) | 4)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_DBG_MON_B_28 (MTK_PIN_NO(107) | 7)
+
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(108) | 1)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_SQIRST (MTK_PIN_NO(108) | 4)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_DBG_MON_B_29 (MTK_PIN_NO(108) | 7)
+
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(109) | 1)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_SQICK (MTK_PIN_NO(109) | 4)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_DBG_MON_B_30 (MTK_PIN_NO(109) | 7)
+
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(110) | 1)
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(110) | 4)
+
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(111) | 1)
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(111) | 4)
+
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(112) | 1)
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(112) | 4)
+
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(113) | 1)
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_NLD3 (MTK_PIN_NO(113) | 4)
+
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(114) | 1)
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_NLD0 (MTK_PIN_NO(114) | 4)
+
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(115) | 1)
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(115) | 4)
+
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(116) | 1)
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(116) | 4)
+
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(117) | 1)
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_NLD1 (MTK_PIN_NO(117) | 4)
+
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(118) | 1)
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_NLD5 (MTK_PIN_NO(118) | 4)
+
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(119) | 1)
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_NLD8 (MTK_PIN_NO(119) | 4)
+
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(120) | 1)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(120) | 4)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_NLD2 (MTK_PIN_NO(120) | 5)
+
+#endif				/* __DTS_MT8516_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
new file mode 100644
index 0000000000..cce642c538
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "mt8516.dtsi"
+#include "pumpkin-common.dtsi"
+
+/ {
+	model = "Pumpkin MT8516";
+	compatible = "mediatek,mt8516";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
new file mode 100644
index 0000000000..9cbd6dd8f6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -0,0 +1,527 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/clock/mt8516-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "mt8516-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt8516";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1200000>;
+		};
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1250000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <600>;
+				exit-latency-us = <600>;
+				min-residency-us = <1200>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <800>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x2010000>;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clk26m: clk26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: clk32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x20000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8516-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt8516-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: pericfg@10003050 {
+			compatible = "mediatek,mt8516-pericfg", "syscon";
+			reg = <0 0x10003050 0 0x1000>;
+		};
+
+		apmixedsys: apmixedsys@10018000 {
+			compatible = "mediatek,mt8516-apmixedsys", "syscon";
+			reg = <0 0x10018000 0 0x710>;
+			#clock-cells = <1>;
+		};
+
+		watchdog@10007000 {
+			compatible = "mediatek,mt8516-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8516-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_CLK26M_D2>,
+				 <&topckgen CLK_TOP_APXGPT>;
+			clock-names = "clk13m", "bus";
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8516-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		efuse: efuse@10009000 {
+			compatible = "mediatek,mt8516-efuse", "mediatek,efuse";
+			reg = <0 0x10009000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8516-pwrap";
+			reg = <0 0x1000f000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PMICWRAP_26M>,
+				 <&topckgen CLK_TOP_PMICWRAP_AP>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: interrupt-controller@10200620 {
+			compatible = "mediatek,mt8516-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		gic: interrupt-controller@10310000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10310000 0 0x1000>,
+			      <0 0x10320000 0 0x1000>,
+			      <0 0x10340000 0 0x2000>,
+			      <0 0x10360000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apdma: dma-controller@11000480 {
+			compatible = "mediatek,mt8516-uart-dma",
+				     "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000480 0 0x80>,
+			      <0 0x11000500 0 0x80>,
+			      <0 0x11000580 0 0x80>,
+			      <0 0x11000600 0 0x80>,
+			      <0 0x11000980 0 0x80>,
+			      <0 0x11000a00 0 0x80>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <6>;
+			clocks = <&topckgen CLK_TOP_APDMA>;
+			clock-names = "apdma";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@11005000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART0_SEL>,
+				 <&topckgen CLK_TOP_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0
+				&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11006000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11006000 0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART1_SEL>,
+				 <&topckgen CLK_TOP_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2
+				&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@11007000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11007000 0 0x1000>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART2_SEL>,
+				 <&topckgen CLK_TOP_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4
+				&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11009000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x11009000 0 0x90>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_I2C0>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1100a000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100a000 0 0x90>,
+			      <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_I2C1>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1100b000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100b000 0 0x90>,
+			      <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_I2C2>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100c000 {
+			compatible = "mediatek,mt8516-spi",
+				     "mediatek,mt2712-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100c000 0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D12>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&topckgen CLK_TOP_SPI>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		mmc0: mmc@11120000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11120000 0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC0>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC0_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11130000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11130000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC1>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC1_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11170000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11170000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC2>,
+				 <&topckgen CLK_TOP_RG_MSDC2>,
+				 <&topckgen CLK_TOP_MSDC2_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@11180000 {
+			compatible = "mediatek,mt8516-eth";
+			reg = <0 0x11180000 0 0x1000>;
+			mediatek,pericfg = <&pericfg>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_RG_ETH>,
+				 <&topckgen CLK_TOP_66M_ETH>,
+				 <&topckgen CLK_TOP_133M_ETH>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
+		rng: rng@1020c000 {
+			compatible = "mediatek,mt8516-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020c000 0 0x100>;
+			clocks = <&topckgen CLK_TOP_TRNG>;
+			clock-names = "rng";
+		};
+
+		pwm: pwm@11008000 {
+			compatible = "mediatek,mt8516-pwm";
+			reg = <0 0x11008000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM>,
+				 <&topckgen CLK_TOP_PWM_B>,
+				 <&topckgen CLK_TOP_PWM1_FB>,
+				 <&topckgen CLK_TOP_PWM2_FB>,
+				 <&topckgen CLK_TOP_PWM3_FB>,
+				 <&topckgen CLK_TOP_PWM4_FB>,
+				 <&topckgen CLK_TOP_PWM5_FB>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5";
+		};
+
+		usb0: usb@11100000 {
+			compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb";
+			reg = <0 0x11100000 0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "mc";
+			phys = <&usb0_port PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_USB>,
+				 <&topckgen CLK_TOP_USBIF>,
+				 <&topckgen CLK_TOP_USB_1P>;
+			clock-names = "main","mcu","univpll";
+			status = "disabled";
+		};
+
+		usb1: usb@11190000 {
+			compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb";
+			reg = <0 0x11190000 0 0x1000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "mc";
+			phys = <&usb1_port PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_USB>,
+				 <&topckgen CLK_TOP_USBIF>,
+				 <&topckgen CLK_TOP_USB_1P>;
+			clock-names = "main","mcu","univpll";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb_phy: t-phy@11110000 {
+			compatible = "mediatek,mt8516-tphy",
+				     "mediatek,generic-tphy-v1";
+			reg = <0 0x11110000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb0_port: usb-phy@11110800 {
+				reg = <0 0x11110800 0 0x100>;
+				clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			usb1_port: usb-phy@11110900 {
+				reg = <0 0x11110900 0 0x100>;
+				clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		auxadc: adc@11003000 {
+			compatible = "mediatek,mt8516-auxadc",
+				     "mediatek,mt8173-auxadc";
+			reg = <0 0x11003000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_AUX_ADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
new file mode 100644
index 0000000000..ec8dfb3d1c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &ethernet;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		key-volume-up {
+			gpios = <&pio 42 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <115>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			gpios = <&pio 43 GPIO_ACTIVE_LOW>;
+			label = "volume_down";
+			linux,code = <114>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-div = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		eint20-mux-sel0-hog {
+			gpio-hog;
+			gpios = <0 0>;
+			input;
+			line-name = "eint20_mux_sel0";
+		};
+
+		expcon-mux-sel1-hog {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "expcon_mux_sel1";
+		};
+
+		mrg-di-mux-sel2-hog {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "mrg_di_mux_sel2";
+		};
+
+		sd-sdio-mux-sel3-hog {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "sd_sdio_mux_sel3";
+		};
+
+		sd-sdio-mux-ctrl7-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			output-low;
+			line-name = "sd_sdio_mux_ctrl7";
+		};
+
+		hw-id0-hog {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "hw_id0";
+		};
+
+		hw-id1-hog {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "hw_id1";
+		};
+
+		hw-id2-hog {
+			gpio-hog;
+			gpios = <10 0>;
+			input;
+			line-name = "hw_id2";
+		};
+
+		fg-int-n-hog {
+			gpio-hog;
+			gpios = <11 0>;
+			input;
+			line-name = "fg_int_n";
+		};
+
+		usba-pwr-en-hog {
+			gpio-hog;
+			gpios = <12 0>;
+			output-high;
+			line-name = "usba_pwr_en";
+		};
+
+		wifi-3v3-pg-hog {
+			gpio-hog;
+			gpios = <13 0>;
+			input;
+			line-name = "wifi_3v3_pg";
+		};
+
+		cam-rst-hog {
+			gpio-hog;
+			gpios = <14 0>;
+			output-low;
+			line-name = "cam_rst";
+		};
+
+		cam-pwdn-hog {
+			gpio-hog;
+			gpios = <15 0>;
+			output-low;
+			line-name = "cam_pwdn";
+		};
+	};
+};
+
+&i2c2 {
+	clock-div = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins_default>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rmii";
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	usb-role-switch;
+
+	usb_con: connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&pio {
+	gpio_keys_default: gpiodefault {
+		pins_cmd_dat {
+			pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
+				 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins_a: i2c0 {
+		pins1 {
+			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
+				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2 {
+		pins1 {
+			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
+				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
+			bias-disable;
+		};
+	};
+
+	tca6416_pins: pinmux_tca6416_pins {
+		gpio_mux_rst_n_pin {
+			pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
+			output-high;
+		};
+
+		gpio_mux_int_n_pin {
+			pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	ethernet_pins_default: ethernet {
+		pins_ethernet {
+			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
+				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
+				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
+				 <MT8516_PIN_6_EINT6__FUNC_EXT_RXC>,
+				 <MT8516_PIN_7_EINT7__FUNC_EXT_RXDV>,
+				 <MT8516_PIN_8_EINT8__FUNC_EXT_RXD0>,
+				 <MT8516_PIN_9_EINT9__FUNC_EXT_RXD1>,
+				 <MT8516_PIN_12_EINT12__FUNC_EXT_TXEN>,
+				 <MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO>,
+				 <MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/Makefile b/arch/arm64/boot/dts/microchip/Makefile
new file mode 100644
index 0000000000..c6e0313eea
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb125.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb134.dtb sparx5_pcb134_emmc.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb135.dtb sparx5_pcb135_emmc.dtb
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
new file mode 100644
index 0000000000..24075cd914
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/microchip,sparx5.h>
+
+/ {
+	compatible = "microchip,sparx5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	aliases {
+		spi0 = &spi0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	psci: psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	lcpll_clk: lcpll-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2500000000>;
+	};
+
+	clks: clock-controller@61110000c {
+		compatible = "microchip,sparx5-dpll";
+		#clock-cells = <1>;
+		clocks = <&lcpll_clk>;
+		reg = <0x6 0x1110000c 0x24>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+	};
+
+	sys_clk: sys-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <625000000>;
+	};
+
+	axi: axi@600000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gic: interrupt-controller@600300000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			reg = <0x6 0x00300000 0x10000>,	/* GIC Dist */
+			      <0x6 0x00340000 0xc0000>,	/* GICR */
+			      <0x6 0x00200000 0x2000>,	/* GICC */
+			      <0x6 0x00210000 0x2000>,  /* GICV */
+			      <0x6 0x00220000 0x2000>;  /* GICH */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cpu_ctrl: syscon@600000000 {
+			compatible = "microchip,sparx5-cpu-syscon", "syscon",
+				     "simple-mfd";
+			reg = <0x6 0x00000000 0xd0>;
+			mux: mux-controller {
+				compatible = "mmio-mux";
+				#mux-control-cells = <0>;
+				/*
+				 * SI_OWNER and SI2_OWNER in GENERAL_CTRL
+				 * SPI:  value 9 - (SIMC,SIBM) = 0b1001
+				 * SPI2: value 6 - (SIBM,SIMC) = 0b0110
+				 */
+				mux-reg-masks = <0x88 0xf0>;
+			};
+		};
+
+		reset: reset-controller@611010008 {
+			compatible = "microchip,sparx5-switch-reset";
+			reg = <0x6 0x11010008 0x4>;
+			reg-names = "gcb";
+			#reset-cells = <1>;
+			cpu-syscon = <&cpu_ctrl>;
+		};
+
+		uart0: serial@600100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x6 0x00100000 0x20>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@600102000 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x6 0x00102000 0x20>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		spi0: spi@600104000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sparx5-spi";
+			reg = <0x6 0x00104000 0x40>;
+			num-cs = <16>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer1: timer@600105000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x6 0x00105000 0x1000>;
+			clocks = <&ahb_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdhci0: mmc@600800000 {
+			compatible = "microchip,dw-sparx5-sdhci";
+			status = "disabled";
+			reg = <0x6 0x00800000 0x1000>;
+			pinctrl-0 = <&emmc_pins>;
+			pinctrl-names = "default";
+			clocks = <&clks CLK_ID_AUX1>;
+			clock-names = "core";
+			assigned-clocks = <&clks CLK_ID_AUX1>;
+			assigned-clock-rates = <800000000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+		};
+
+		gpio: pinctrl@6110101e0 {
+			compatible = "microchip,sparx5-pinctrl";
+			reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 64>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+
+			cs1_pins: cs1-pins {
+				pins = "GPIO_16";
+				function = "si";
+			};
+
+			cs2_pins: cs2-pins {
+				pins = "GPIO_17";
+				function = "si";
+			};
+
+			cs3_pins: cs3-pins {
+				pins = "GPIO_18";
+				function = "si";
+			};
+
+			si2_pins: si2-pins {
+				pins = "GPIO_39", "GPIO_40", "GPIO_41";
+				function = "si2";
+			};
+
+			sgpio0_pins: sgpio-pins {
+				pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+				function = "sg0";
+			};
+
+			sgpio1_pins: sgpio1-pins {
+				pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13";
+				function = "sg1";
+			};
+
+			sgpio2_pins: sgpio2-pins {
+				pins = "GPIO_30", "GPIO_31", "GPIO_32",
+				       "GPIO_33";
+				function = "sg2";
+			};
+
+			uart_pins: uart-pins {
+				pins = "GPIO_10", "GPIO_11";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_26", "GPIO_27";
+				function = "uart2";
+			};
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_14", "GPIO_15";
+				function = "twi";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "GPIO_28", "GPIO_29";
+				function = "twi2";
+			};
+
+			emmc_pins: emmc-pins {
+				pins = "GPIO_34", "GPIO_35", "GPIO_36",
+					"GPIO_37", "GPIO_38", "GPIO_39",
+					"GPIO_40", "GPIO_41", "GPIO_42",
+					"GPIO_43", "GPIO_44", "GPIO_45",
+					"GPIO_46", "GPIO_47";
+				function = "emmc";
+			};
+
+			miim1_pins: miim1-pins {
+				pins = "GPIO_56", "GPIO_57";
+				function = "miim";
+			};
+
+			miim2_pins: miim2-pins {
+				pins = "GPIO_58", "GPIO_59";
+				function = "miim";
+			};
+
+			miim3_pins: miim3-pins {
+				pins = "GPIO_52", "GPIO_53";
+				function = "miim";
+			};
+		};
+
+		sgpio0: gpio@61101036c {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sparx5-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio0_pins>;
+			pinctrl-names = "default";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			reg = <0x6 0x1101036c 0x100>;
+			sgpio_in0: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+			sgpio_out0: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+			};
+		};
+
+		sgpio1: gpio@611010484 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sparx5-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio1_pins>;
+			pinctrl-names = "default";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			reg = <0x6 0x11010484 0x100>;
+			sgpio_in1: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+			sgpio_out1: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+			};
+		};
+
+		sgpio2: gpio@61101059c {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sparx5-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio2_pins>;
+			pinctrl-names = "default";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			reg = <0x6 0x1101059c 0x100>;
+			sgpio_in2: gpio@0 {
+				reg = <0>;
+				compatible = "microchip,sparx5-sgpio-bank";
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+			sgpio_out2: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+			};
+		};
+
+		i2c0: i2c@600101000 {
+			compatible = "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x00101000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-sda-hold-time-ns = <300>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+
+		i2c1: i2c@600103000 {
+			compatible = "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x00103000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-sda-hold-time-ns = <300>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+
+		tmon0: tmon@610508110 {
+			compatible = "microchip,sparx5-temp";
+			reg = <0x6 0x10508110 0xc>;
+			#thermal-sensor-cells = <0>;
+			clocks = <&ahb_clk>;
+		};
+
+		mdio0: mdio@6110102b0 {
+			compatible = "mscc,ocelot-miim";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6 0x110102b0 0x24>;
+		};
+
+		mdio1: mdio@6110102d4 {
+			compatible = "mscc,ocelot-miim";
+			status = "disabled";
+			pinctrl-0 = <&miim1_pins>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6 0x110102d4 0x24>;
+		};
+
+		mdio2: mdio@6110102f8 {
+			compatible = "mscc,ocelot-miim";
+			status = "disabled";
+			pinctrl-0 = <&miim2_pins>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6 0x110102d4 0x24>;
+		};
+
+		mdio3: mdio@61101031c {
+			compatible = "mscc,ocelot-miim";
+			status = "disabled";
+			pinctrl-0 = <&miim3_pins>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6 0x1101031c 0x24>;
+		};
+
+		serdes: serdes@10808000 {
+			compatible = "microchip,sparx5-serdes";
+			#phy-cells = <1>;
+			clocks = <&sys_clk>;
+			reg = <0x6 0x10808000 0x5d0000>;
+		};
+
+		switch: switch@600000000 {
+			compatible = "microchip,sparx5-switch";
+			reg = <0x6 0 0x401000>,
+			      <0x6 0x10004000 0x7fc000>,
+			      <0x6 0x11010000 0xaf0000>;
+			reg-names = "cpu", "dev", "gcb";
+			interrupt-names = "xtr", "fdma", "ptp";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi
new file mode 100644
index 0000000000..ce0747fd64
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+&gpio {
+	cs14_pins: cs14-pins {
+		pins = "GPIO_44";
+		function = "si";
+	};
+};
+
+&spi0 {
+	pinctrl-0 = <&si2_pins>;
+	pinctrl-names = "default";
+	spi@e {
+		compatible = "spi-mux";
+		mux-controls = <&mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <14>; /* CS14 */
+		flash@6 {
+			compatible = "spi-nand";
+			pinctrl-0 = <&cs14_pins>;
+			pinctrl-names = "default";
+			reg = <0x6>; /* SPI2 */
+			spi-max-frequency = <42000000>;
+			rx-sample-delay-ns = <7>;  /* Tune for speed */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
new file mode 100644
index 0000000000..dbf8c1d48a
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/ {
+	model = "Sparx5 PCB125 Reference Board";
+	compatible = "microchip,sparx5-pcb125", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
+
+&gpio {
+	emmc_pins: emmc-pins {
+		/* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+		 * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+		 */
+		pins = "GPIO_34", "GPIO_38", "GPIO_39",
+			"GPIO_40", "GPIO_41", "GPIO_42",
+			"GPIO_43", "GPIO_44", "GPIO_45",
+			"GPIO_46", "GPIO_47";
+		drive-strength = <3>;
+		function = "emmc";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&emmc_pins>;
+	max-frequency = <8000000>;
+	microchip,clock-delay = <10>;
+};
+
+&spi0 {
+	status = "okay";
+	spi@0 {
+		compatible = "spi-mux";
+		mux-controls = <&mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;	/* CS0 */
+		flash@9 {
+			compatible = "jedec,spi-nor";
+			spi-max-frequency = <8000000>;
+			reg = <0x9>;	/* SPI */
+		};
+	};
+	spi@1 {
+		compatible = "spi-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>; /* CS1 */
+		flash@9 {
+			compatible = "spi-nand";
+			pinctrl-0 = <&cs1_pins>;
+			pinctrl-names = "default";
+			spi-max-frequency = <8000000>;
+			reg = <0x9>;	/* SPI */
+		};
+	};
+};
+
+&sgpio0 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <0 23>;
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
new file mode 100644
index 0000000000..45ca1af7e8
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+#include "sparx5_nand.dtsi"
+
+/ {
+	model = "Sparx5 PCB134 Reference Board (NAND)";
+	compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
new file mode 100644
index 0000000000..f3e226de5e
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "twr0:green";
+			gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>;
+		};
+		led@1 {
+			label = "twr0:yellow";
+			gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>;
+		};
+		led@2 {
+			label = "twr1:green";
+			gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>;
+		};
+		led@3 {
+			label = "twr1:yellow";
+			gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>;
+		};
+		led@4 {
+			label = "twr2:green";
+			gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>;
+		};
+		led@5 {
+			label = "twr2:yellow";
+			gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>;
+		};
+		led@6 {
+			label = "twr3:green";
+			gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>;
+		};
+		led@7 {
+			label = "twr3:yellow";
+			gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>;
+		};
+		led@8 {
+			label = "eth12:green";
+			gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@9 {
+			label = "eth12:yellow";
+			gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@10 {
+			label = "eth13:green";
+			gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@11 {
+			label = "eth13:yellow";
+			gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@12 {
+			label = "eth14:green";
+			gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@13 {
+			label = "eth14:yellow";
+			gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@14 {
+			label = "eth15:green";
+			gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@15 {
+			label = "eth15:yellow";
+			gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@16 {
+			label = "eth48:green";
+			gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@17 {
+			label = "eth48:yellow";
+			gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@18 {
+			label = "eth49:green";
+			gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@19 {
+			label = "eth49:yellow";
+			gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@20 {
+			label = "eth50:green";
+			gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@21 {
+			label = "eth50:yellow";
+			gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@22 {
+			label = "eth51:green";
+			gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@23 {
+			label = "eth51:yellow";
+			gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@24 {
+			label = "eth52:green";
+			gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@25 {
+			label = "eth52:yellow";
+			gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@26 {
+			label = "eth53:green";
+			gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@27 {
+			label = "eth53:yellow";
+			gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@28 {
+			label = "eth54:green";
+			gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@29 {
+			label = "eth54:yellow";
+			gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@30 {
+			label = "eth55:green";
+			gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@31 {
+			label = "eth55:yellow";
+			gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@32 {
+			label = "eth56:green";
+			gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@33 {
+			label = "eth56:yellow";
+			gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@34 {
+			label = "eth57:green";
+			gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@35 {
+			label = "eth57:yellow";
+			gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@36 {
+			label = "eth58:green";
+			gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@37 {
+			label = "eth58:yellow";
+			gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@38 {
+			label = "eth59:green";
+			gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@39 {
+			label = "eth59:yellow";
+			gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@40 {
+			label = "eth60:green";
+			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@41 {
+			label = "eth60:yellow";
+			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@42 {
+			label = "eth61:green";
+			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@43 {
+			label = "eth61:yellow";
+			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@44 {
+			label = "eth62:green";
+			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@45 {
+			label = "eth62:yellow";
+			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@46 {
+			label = "eth63:green";
+			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@47 {
+			label = "eth63:yellow";
+			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&sgpio0 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <8 15>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&sgpio1 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <24 31>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <8000000>;
+		reg = <0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	spi@0 {
+		compatible = "spi-mux";
+		mux-controls = <&mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;	/* CS0 */
+		flash@9 {
+			compatible = "jedec,spi-nor";
+			spi-max-frequency = <8000000>;
+			reg = <0x9>;	/* SPI */
+		};
+	};
+};
+
+&sgpio0 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <8 15>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&sgpio1 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <24 31>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&sgpio2 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <0 0>, <11 31>;
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins {
+	       pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
+		      "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35",
+		      "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_0: i2cmux-0-pins {
+		pins = "GPIO_16";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_1: i2cmux-1-pins {
+		pins = "GPIO_17";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_2: i2cmux-2-pins {
+		pins = "GPIO_18";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_3: i2cmux-3-pins {
+		pins = "GPIO_19";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_4: i2cmux-4-pins {
+		pins = "GPIO_20";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_5: i2cmux-5-pins {
+		pins = "GPIO_22";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_6: i2cmux-6-pins {
+		pins = "GPIO_36";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_7: i2cmux-7-pins {
+		pins = "GPIO_35";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_8: i2cmux-8-pins {
+		pins = "GPIO_50";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_9: i2cmux-9-pins {
+		pins = "GPIO_51";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_10: i2cmux-10-pins {
+		pins = "GPIO_56";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_11: i2cmux-11-pins {
+		pins = "GPIO_57";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&axi {
+	i2c0_imux: i2c0-imux@0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+	i2c0_emux: i2c0-emux@0 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+};
+
+&i2c0_imux {
+	pinctrl-names =
+		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
+		"i2c_sfp5", "i2c_sfp6", "i2c_sfp7", "i2c_sfp8",
+		"i2c_sfp9", "i2c_sfp10", "i2c_sfp11", "i2c_sfp12", "idle";
+	pinctrl-0 = <&i2cmux_0>;
+	pinctrl-1 = <&i2cmux_1>;
+	pinctrl-2 = <&i2cmux_2>;
+	pinctrl-3 = <&i2cmux_3>;
+	pinctrl-4 = <&i2cmux_4>;
+	pinctrl-5 = <&i2cmux_5>;
+	pinctrl-6 = <&i2cmux_6>;
+	pinctrl-7 = <&i2cmux_7>;
+	pinctrl-8 = <&i2cmux_8>;
+	pinctrl-9 = <&i2cmux_9>;
+	pinctrl-10 = <&i2cmux_10>;
+	pinctrl-11 = <&i2cmux_11>;
+	pinctrl-12 = <&i2cmux_pins_i>;
+	i2c_sfp1: i2c_sfp1 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp2: i2c_sfp2 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp3: i2c_sfp3 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp4: i2c_sfp4 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp5: i2c_sfp5 {
+		reg = <0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp6: i2c_sfp6 {
+		reg = <0x5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp7: i2c_sfp7 {
+		reg = <0x6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp8: i2c_sfp8 {
+		reg = <0x7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp9: i2c_sfp9 {
+		reg = <0x8>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp10: i2c_sfp10 {
+		reg = <0x9>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp11: i2c_sfp11 {
+		reg = <0xa>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp12: i2c_sfp12 {
+		reg = <0xb>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c0_emux {
+	mux-gpios = <&gpio 55 GPIO_ACTIVE_HIGH
+		     &gpio 60 GPIO_ACTIVE_HIGH
+		     &gpio 61 GPIO_ACTIVE_HIGH
+		     &gpio 54 GPIO_ACTIVE_HIGH>;
+	idle-state = <0x8>;
+	i2c_sfp13: i2c_sfp13 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp14: i2c_sfp14 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp15: i2c_sfp15 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp16: i2c_sfp16 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp17: i2c_sfp17 {
+		reg = <0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp18: i2c_sfp18 {
+		reg = <0x5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp19: i2c_sfp19 {
+		reg = <0x6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp20: i2c_sfp20 {
+		reg = <0x7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	phy64: ethernet-phy@64 {
+		reg = <28>;
+	};
+};
+
+&axi {
+	sfp_eth12: sfp-eth12 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth13: sfp-eth13 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth14: sfp-eth14 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth15: sfp-eth15 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth48: sfp-eth48 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp5>;
+		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth49: sfp-eth49 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp6>;
+		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth50: sfp-eth50 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp7>;
+		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth51: sfp-eth51 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp8>;
+		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth52: sfp-eth52 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp9>;
+		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth53: sfp-eth53 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp10>;
+		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth54: sfp-eth54 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp11>;
+		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth55: sfp-eth55 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp12>;
+		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth56: sfp-eth56 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp13>;
+		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth57: sfp-eth57 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp14>;
+		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth58: sfp-eth58 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp15>;
+		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth59: sfp-eth59 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp16>;
+		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth60: sfp-eth60 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp17>;
+		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp18>;
+		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp19>;
+		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp20>;
+		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&switch {
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 10G SFPs */
+		port12: port@12 {
+			reg = <12>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 13>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth12>;
+			microchip,sd-sgpio = <301>;
+			managed = "in-band-status";
+		};
+		port13: port@13 {
+			reg = <13>;
+			/* Example: CU SFP, 1G speed */
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 14>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth13>;
+			microchip,sd-sgpio = <305>;
+			managed = "in-band-status";
+		};
+		port14: port@14 {
+			reg = <14>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 15>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth14>;
+			microchip,sd-sgpio = <309>;
+			managed = "in-band-status";
+		};
+		port15: port@15 {
+			reg = <15>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 16>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth15>;
+			microchip,sd-sgpio = <313>;
+			managed = "in-band-status";
+		};
+		port48: port@48 {
+			reg = <48>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 17>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth48>;
+			microchip,sd-sgpio = <317>;
+			managed = "in-band-status";
+		};
+		port49: port@49 {
+			reg = <49>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 18>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth49>;
+			microchip,sd-sgpio = <321>;
+			managed = "in-band-status";
+		};
+		port50: port@50 {
+			reg = <50>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 19>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth50>;
+			microchip,sd-sgpio = <325>;
+			managed = "in-band-status";
+		};
+		port51: port@51 {
+			reg = <51>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 20>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth51>;
+			microchip,sd-sgpio = <329>;
+			managed = "in-band-status";
+		};
+		port52: port@52 {
+			reg = <52>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 21>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth52>;
+			microchip,sd-sgpio = <333>;
+			managed = "in-band-status";
+		};
+		port53: port@53 {
+			reg = <53>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 22>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth53>;
+			microchip,sd-sgpio = <337>;
+			managed = "in-band-status";
+		};
+		port54: port@54 {
+			reg = <54>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 23>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth54>;
+			microchip,sd-sgpio = <341>;
+			managed = "in-band-status";
+		};
+		port55: port@55 {
+			reg = <55>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 24>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth55>;
+			microchip,sd-sgpio = <345>;
+			managed = "in-band-status";
+		};
+		/* 25G SFPs */
+		port56: port@56 {
+			reg = <56>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 25>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth56>;
+			microchip,sd-sgpio = <349>;
+			managed = "in-band-status";
+		};
+		port57: port@57 {
+			reg = <57>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 26>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth57>;
+			microchip,sd-sgpio = <353>;
+			managed = "in-band-status";
+		};
+		port58: port@58 {
+			reg = <58>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 27>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth58>;
+			microchip,sd-sgpio = <357>;
+			managed = "in-band-status";
+		};
+		port59: port@59 {
+			reg = <59>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 28>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth59>;
+			microchip,sd-sgpio = <361>;
+			managed = "in-band-status";
+		};
+		port60: port@60 {
+			reg = <60>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 29>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth60>;
+			microchip,sd-sgpio = <365>;
+			managed = "in-band-status";
+		};
+		port61: port@61 {
+			reg = <61>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 30>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth61>;
+			microchip,sd-sgpio = <369>;
+			managed = "in-band-status";
+		};
+		port62: port@62 {
+			reg = <62>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 31>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth62>;
+			microchip,sd-sgpio = <373>;
+			managed = "in-band-status";
+		};
+		port63: port@63 {
+			reg = <63>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 32>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth63>;
+			microchip,sd-sgpio = <377>;
+			managed = "in-band-status";
+		};
+		/* Finally the Management interface */
+		port64: port@64 {
+			reg = <64>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 0>;
+			phy-handle = <&phy64>;
+			phy-mode = "sgmii";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
new file mode 100644
index 0000000000..bbb9852c1f
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB134 Reference Board (eMMC enabled)";
+	compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
+
+&gpio {
+	emmc_pins: emmc-pins {
+		/* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+		 * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+		 */
+		pins = "GPIO_34", "GPIO_38", "GPIO_39",
+			"GPIO_40", "GPIO_41", "GPIO_42",
+			"GPIO_43", "GPIO_44", "GPIO_45",
+			"GPIO_46", "GPIO_47";
+		drive-strength = <3>;
+		function = "emmc";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
+	microchip,clock-delay = <10>;
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
new file mode 100644
index 0000000000..647cdb38b1
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+#include "sparx5_nand.dtsi"
+
+/ {
+	model = "Sparx5 PCB135 Reference Board (NAND)";
+	compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
new file mode 100644
index 0000000000..82ce007d99
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "eth60:yellow";
+			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@1 {
+			label = "eth60:green";
+			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "eth61:yellow";
+			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@3 {
+			label = "eth61:green";
+			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@4 {
+			label = "eth62:yellow";
+			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@5 {
+			label = "eth62:green";
+			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@6 {
+			label = "eth63:yellow";
+			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@7 {
+			label = "eth63:green";
+			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins {
+	       pins = "GPIO_35", "GPIO_36",
+		      "GPIO_50", "GPIO_51";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_s29: i2cmux-0-pins {
+		pins = "GPIO_35";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s30: i2cmux-1-pins {
+		pins = "GPIO_36";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s31: i2cmux-2-pins {
+		pins = "GPIO_50";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s32: i2cmux-3-pins {
+		pins = "GPIO_51";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <8000000>;
+		reg = <0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	spi@0 {
+		compatible = "spi-mux";
+		mux-controls = <&mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>; /* CS0 */
+		flash@9 {
+			compatible = "jedec,spi-nor";
+			spi-max-frequency = <8000000>;
+			reg = <0x9>; /* SPI */
+		};
+	};
+};
+
+&sgpio1 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <24 31>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&sgpio2 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
+};
+
+&axi {
+	i2c0_imux: i2c0-imux@0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+};
+
+&i2c0_imux {
+	pinctrl-names =
+		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
+		"idle";
+	pinctrl-0 = <&i2cmux_s29>;
+	pinctrl-1 = <&i2cmux_s30>;
+	pinctrl-2 = <&i2cmux_s31>;
+	pinctrl-3 = <&i2cmux_s32>;
+	pinctrl-4 = <&i2cmux_pins_i>;
+	i2c_sfp1: i2c_sfp1 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp2: i2c_sfp2 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp3: i2c_sfp3 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp4: i2c_sfp4 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&axi {
+	sfp_eth60: sfp-eth60 {
+		compatible	 = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+	phy5: ethernet-phy@5 {
+		reg = <5>;
+	};
+	phy6: ethernet-phy@6 {
+		reg = <6>;
+	};
+	phy7: ethernet-phy@7 {
+		reg = <7>;
+	};
+	phy8: ethernet-phy@8 {
+		reg = <8>;
+	};
+	phy9: ethernet-phy@9 {
+		reg = <9>;
+	};
+	phy10: ethernet-phy@10 {
+		reg = <10>;
+	};
+	phy11: ethernet-phy@11 {
+		reg = <11>;
+	};
+	phy12: ethernet-phy@12 {
+		reg = <12>;
+	};
+	phy13: ethernet-phy@13 {
+		reg = <13>;
+	};
+	phy14: ethernet-phy@14 {
+		reg = <14>;
+	};
+	phy15: ethernet-phy@15 {
+		reg = <15>;
+	};
+	phy16: ethernet-phy@16 {
+		reg = <16>;
+	};
+	phy17: ethernet-phy@17 {
+		reg = <17>;
+	};
+	phy18: ethernet-phy@18 {
+		reg = <18>;
+	};
+	phy19: ethernet-phy@19 {
+		reg = <19>;
+	};
+	phy20: ethernet-phy@20 {
+		reg = <20>;
+	};
+	phy21: ethernet-phy@21 {
+		reg = <21>;
+	};
+	phy22: ethernet-phy@22 {
+		reg = <22>;
+	};
+	phy23: ethernet-phy@23 {
+		reg = <23>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+	phy24: ethernet-phy@24 {
+		reg = <0>;
+	};
+	phy25: ethernet-phy@25 {
+		reg = <1>;
+	};
+	phy26: ethernet-phy@26 {
+		reg = <2>;
+	};
+	phy27: ethernet-phy@27 {
+		reg = <3>;
+	};
+	phy28: ethernet-phy@28 {
+		reg = <4>;
+	};
+	phy29: ethernet-phy@29 {
+		reg = <5>;
+	};
+	phy30: ethernet-phy@30 {
+		reg = <6>;
+	};
+	phy31: ethernet-phy@31 {
+		reg = <7>;
+	};
+	phy32: ethernet-phy@32 {
+		reg = <8>;
+	};
+	phy33: ethernet-phy@33 {
+		reg = <9>;
+	};
+	phy34: ethernet-phy@34 {
+		reg = <10>;
+	};
+	phy35: ethernet-phy@35 {
+		reg = <11>;
+	};
+	phy36: ethernet-phy@36 {
+		reg = <12>;
+	};
+	phy37: ethernet-phy@37 {
+		reg = <13>;
+	};
+	phy38: ethernet-phy@38 {
+		reg = <14>;
+	};
+	phy39: ethernet-phy@39 {
+		reg = <15>;
+	};
+	phy40: ethernet-phy@40 {
+		reg = <16>;
+	};
+	phy41: ethernet-phy@41 {
+		reg = <17>;
+	};
+	phy42: ethernet-phy@42 {
+		reg = <18>;
+	};
+	phy43: ethernet-phy@43 {
+		reg = <19>;
+	};
+	phy44: ethernet-phy@44 {
+		reg = <20>;
+	};
+	phy45: ethernet-phy@45 {
+		reg = <21>;
+	};
+	phy46: ethernet-phy@46 {
+		reg = <22>;
+	};
+	phy47: ethernet-phy@47 {
+		reg = <23>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	phy64: ethernet-phy@64 {
+		reg = <28>;
+	};
+};
+
+&switch {
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port0: port@0 {
+			reg = <0>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 13>;
+			phy-handle = <&phy0>;
+			phy-mode = "qsgmii";
+		};
+		port1: port@1 {
+			reg = <1>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 13>;
+			phy-handle = <&phy1>;
+			phy-mode = "qsgmii";
+		};
+		port2: port@2 {
+			reg = <2>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 13>;
+			phy-handle = <&phy2>;
+			phy-mode = "qsgmii";
+		};
+		port3: port@3 {
+			reg = <3>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 13>;
+			phy-handle = <&phy3>;
+			phy-mode = "qsgmii";
+		};
+		port4: port@4 {
+			reg = <4>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 14>;
+			phy-handle = <&phy4>;
+			phy-mode = "qsgmii";
+		};
+		port5: port@5 {
+			reg = <5>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 14>;
+			phy-handle = <&phy5>;
+			phy-mode = "qsgmii";
+		};
+		port6: port@6 {
+			reg = <6>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 14>;
+			phy-handle = <&phy6>;
+			phy-mode = "qsgmii";
+		};
+		port7: port@7 {
+			reg = <7>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 14>;
+			phy-handle = <&phy7>;
+			phy-mode = "qsgmii";
+		};
+		port8: port@8 {
+			reg = <8>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 15>;
+			phy-handle = <&phy8>;
+			phy-mode = "qsgmii";
+		};
+		port9: port@9 {
+			reg = <9>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 15>;
+			phy-handle = <&phy9>;
+			phy-mode = "qsgmii";
+		};
+		port10: port@10 {
+			reg = <10>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 15>;
+			phy-handle = <&phy10>;
+			phy-mode = "qsgmii";
+		};
+		port11: port@11 {
+			reg = <11>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 15>;
+			phy-handle = <&phy11>;
+			phy-mode = "qsgmii";
+		};
+		port12: port@12 {
+			reg = <12>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 16>;
+			phy-handle = <&phy12>;
+			phy-mode = "qsgmii";
+		};
+		port13: port@13 {
+			reg = <13>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 16>;
+			phy-handle = <&phy13>;
+			phy-mode = "qsgmii";
+		};
+		port14: port@14 {
+			reg = <14>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 16>;
+			phy-handle = <&phy14>;
+			phy-mode = "qsgmii";
+		};
+		port15: port@15 {
+			reg = <15>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 16>;
+			phy-handle = <&phy15>;
+			phy-mode = "qsgmii";
+		};
+		port16: port@16 {
+			reg = <16>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 17>;
+			phy-handle = <&phy16>;
+			phy-mode = "qsgmii";
+		};
+		port17: port@17 {
+			reg = <17>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 17>;
+			phy-handle = <&phy17>;
+			phy-mode = "qsgmii";
+		};
+		port18: port@18 {
+			reg = <18>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 17>;
+			phy-handle = <&phy18>;
+			phy-mode = "qsgmii";
+		};
+		port19: port@19 {
+			reg = <19>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 17>;
+			phy-handle = <&phy19>;
+			phy-mode = "qsgmii";
+		};
+		port20: port@20 {
+			reg = <20>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 18>;
+			phy-handle = <&phy20>;
+			phy-mode = "qsgmii";
+		};
+		port21: port@21 {
+			reg = <21>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 18>;
+			phy-handle = <&phy21>;
+			phy-mode = "qsgmii";
+		};
+		port22: port@22 {
+			reg = <22>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 18>;
+			phy-handle = <&phy22>;
+			phy-mode = "qsgmii";
+		};
+		port23: port@23 {
+			reg = <23>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 18>;
+			phy-handle = <&phy23>;
+			phy-mode = "qsgmii";
+		};
+		port24: port@24 {
+			reg = <24>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 19>;
+			phy-handle = <&phy24>;
+			phy-mode = "qsgmii";
+		};
+		port25: port@25 {
+			reg = <25>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 19>;
+			phy-handle = <&phy25>;
+			phy-mode = "qsgmii";
+		};
+		port26: port@26 {
+			reg = <26>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 19>;
+			phy-handle = <&phy26>;
+			phy-mode = "qsgmii";
+		};
+		port27: port@27 {
+			reg = <27>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 19>;
+			phy-handle = <&phy27>;
+			phy-mode = "qsgmii";
+		};
+		port28: port@28 {
+			reg = <28>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 20>;
+			phy-handle = <&phy28>;
+			phy-mode = "qsgmii";
+		};
+		port29: port@29 {
+			reg = <29>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 20>;
+			phy-handle = <&phy29>;
+			phy-mode = "qsgmii";
+		};
+		port30: port@30 {
+			reg = <30>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 20>;
+			phy-handle = <&phy30>;
+			phy-mode = "qsgmii";
+		};
+		port31: port@31 {
+			reg = <31>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 20>;
+			phy-handle = <&phy31>;
+			phy-mode = "qsgmii";
+		};
+		port32: port@32 {
+			reg = <32>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 21>;
+			phy-handle = <&phy32>;
+			phy-mode = "qsgmii";
+		};
+		port33: port@33 {
+			reg = <33>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 21>;
+			phy-handle = <&phy33>;
+			phy-mode = "qsgmii";
+		};
+		port34: port@34 {
+			reg = <34>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 21>;
+			phy-handle = <&phy34>;
+			phy-mode = "qsgmii";
+		};
+		port35: port@35 {
+			reg = <35>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 21>;
+			phy-handle = <&phy35>;
+			phy-mode = "qsgmii";
+		};
+		port36: port@36 {
+			reg = <36>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 22>;
+			phy-handle = <&phy36>;
+			phy-mode = "qsgmii";
+		};
+		port37: port@37 {
+			reg = <37>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 22>;
+			phy-handle = <&phy37>;
+			phy-mode = "qsgmii";
+		};
+		port38: port@38 {
+			reg = <38>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 22>;
+			phy-handle = <&phy38>;
+			phy-mode = "qsgmii";
+		};
+		port39: port@39 {
+			reg = <39>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 22>;
+			phy-handle = <&phy39>;
+			phy-mode = "qsgmii";
+		};
+		port40: port@40 {
+			reg = <40>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 23>;
+			phy-handle = <&phy40>;
+			phy-mode = "qsgmii";
+		};
+		port41: port@41 {
+			reg = <41>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 23>;
+			phy-handle = <&phy41>;
+			phy-mode = "qsgmii";
+		};
+		port42: port@42 {
+			reg = <42>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 23>;
+			phy-handle = <&phy42>;
+			phy-mode = "qsgmii";
+		};
+		port43: port@43 {
+			reg = <43>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 23>;
+			phy-handle = <&phy43>;
+			phy-mode = "qsgmii";
+		};
+		port44: port@44 {
+			reg = <44>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 24>;
+			phy-handle = <&phy44>;
+			phy-mode = "qsgmii";
+		};
+		port45: port@45 {
+			reg = <45>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 24>;
+			phy-handle = <&phy45>;
+			phy-mode = "qsgmii";
+		};
+		port46: port@46 {
+			reg = <46>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 24>;
+			phy-handle = <&phy46>;
+			phy-mode = "qsgmii";
+		};
+		port47: port@47 {
+			reg = <47>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 24>;
+			phy-handle = <&phy47>;
+			phy-mode = "qsgmii";
+		};
+		/* Then the 25G interfaces */
+		port60: port@60 {
+			reg = <60>;
+			microchip,bandwidth = <25000>;
+			phys = <&serdes 29>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth60>;
+			managed = "in-band-status";
+		};
+		port61: port@61 {
+			reg = <61>;
+			microchip,bandwidth = <25000>;
+			phys = <&serdes 30>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth61>;
+			managed = "in-band-status";
+		};
+		port62: port@62 {
+			reg = <62>;
+			microchip,bandwidth = <25000>;
+			phys = <&serdes 31>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth62>;
+			managed = "in-band-status";
+		};
+		port63: port@63 {
+			reg = <63>;
+			microchip,bandwidth = <25000>;
+			phys = <&serdes 32>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth63>;
+			managed = "in-band-status";
+		};
+		/* Finally the Management interface */
+		port64: port@64 {
+			reg = <64>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 0>;
+			phy-handle = <&phy64>;
+			phy-mode = "sgmii";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
new file mode 100644
index 0000000000..f82266fe2a
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB135 Reference Board (eMMC enabled)";
+	compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
+
+&gpio {
+	emmc_pins: emmc-pins {
+		/* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+		 * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+		 */
+		pins = "GPIO_34", "GPIO_38", "GPIO_39",
+			"GPIO_40", "GPIO_41", "GPIO_42",
+			"GPIO_43", "GPIO_44", "GPIO_45",
+			"GPIO_46", "GPIO_47";
+		drive-strength = <3>;
+		function = "emmc";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
+	microchip,clock-delay = <10>;
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
new file mode 100644
index 0000000000..32bb76b320
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5.dtsi"
+
+&psci {
+	status = "disabled";
+};
+
+&cpu0 {
+	enable-method = "spin-table";
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/Makefile b/arch/arm64/boot/dts/nuvoton/Makefile
new file mode 100644
index 0000000000..3bc9787801
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MA35) += ma35d1-iot-512m.dtb
+dtb-$(CONFIG_ARCH_MA35) += ma35d1-som-256m.dtb
+dtb-$(CONFIG_ARCH_NPCM) += nuvoton-npcm845-evb.dtb
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
new file mode 100644
index 0000000000..b89e2be6ab
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+/dts-v1/;
+#include "ma35d1.dtsi"
+
+/ {
+	model = "Nuvoton MA35D1-IoT";
+	compatible = "nuvoton,ma35d1-iot", "nuvoton,ma35d1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mem: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x20000000>; /* 512M DRAM */
+	};
+
+	clk_hxt: clock-hxt {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk_hxt";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&clk {
+	assigned-clocks = <&clk CAPLL>,
+			  <&clk DDRPLL>,
+			  <&clk APLL>,
+			  <&clk EPLL>,
+			  <&clk VPLL>;
+	assigned-clock-rates = <800000000>,
+			       <266000000>,
+			       <180000000>,
+			       <500000000>,
+			       <102000000>;
+	nuvoton,pll-mode = "integer",
+			   "fractional",
+			   "integer",
+			   "integer",
+			   "integer";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
new file mode 100644
index 0000000000..a1ebddecb7
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+/dts-v1/;
+#include "ma35d1.dtsi"
+
+/ {
+	model = "Nuvoton MA35D1-SOM";
+	compatible = "nuvoton,ma35d1-som", "nuvoton,ma35d1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mem: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x10000000>; /* 256M DRAM */
+	};
+
+	clk_hxt: clock-hxt {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk_hxt";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&clk {
+	assigned-clocks = <&clk CAPLL>,
+			  <&clk DDRPLL>,
+			  <&clk APLL>,
+			  <&clk EPLL>,
+			  <&clk VPLL>;
+	assigned-clock-rates = <800000000>,
+			       <266000000>,
+			       <180000000>,
+			       <500000000>,
+			       <102000000>;
+	nuvoton,pll-mode = "integer",
+			   "fractional",
+			   "integer",
+			   "integer",
+			   "integer";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
new file mode 100644
index 0000000000..781cdae566
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+#include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
+
+/ {
+	compatible = "nuvoton,ma35d1";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@50801000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0x50801000 0 0x1000>, /* GICD */
+		      <0x0 0x50802000 0 0x2000>, /* GICC */
+		      <0x0 0x50804000 0 0x2000>, /* GICH */
+		      <0x0 0x50806000 0 0x2000>; /* GICV */
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0x13) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+		interrupt-parent = <&gic>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sys: system-management@40460000 {
+			compatible = "nuvoton,ma35d1-reset";
+			reg = <0x0 0x40460000 0x0 0x200>;
+			#reset-cells = <1>;
+		};
+
+		clk: clock-controller@40460200 {
+			compatible = "nuvoton,ma35d1-clk";
+			reg = <0x00000000 0x40460200 0x0 0x100>;
+			#clock-cells = <1>;
+			clocks = <&clk_hxt>;
+		};
+
+		uart0: serial@40700000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40700000 0x0 0x100>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART0_GATE>;
+			status = "disabled";
+		};
+
+		uart1: serial@40710000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40710000 0x0 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART1_GATE>;
+			status = "disabled";
+		};
+
+		uart2: serial@40720000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40720000 0x0 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART2_GATE>;
+			status = "disabled";
+		};
+
+		uart3: serial@40730000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40730000 0x0 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART3_GATE>;
+			status = "disabled";
+		};
+
+		uart4: serial@40740000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40740000 0x0 0x100>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART4_GATE>;
+			status = "disabled";
+		};
+
+		uart5: serial@40750000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40750000 0x0 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART5_GATE>;
+			status = "disabled";
+		};
+
+		uart6: serial@40760000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40760000 0x0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART6_GATE>;
+			status = "disabled";
+		};
+
+		uart7: serial@40770000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40770000 0x0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART7_GATE>;
+			status = "disabled";
+		};
+
+		uart8: serial@40780000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40780000 0x0 0x100>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART8_GATE>;
+			status = "disabled";
+		};
+
+		uart9: serial@40790000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40790000 0x0 0x100>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART9_GATE>;
+			status = "disabled";
+		};
+
+		uart10: serial@407a0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART10_GATE>;
+			status = "disabled";
+		};
+
+		uart11: serial@407b0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART11_GATE>;
+			status = "disabled";
+		};
+
+		uart12: serial@407c0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART12_GATE>;
+			status = "disabled";
+		};
+
+		uart13: serial@407d0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407d0000 0x0 0x100>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART13_GATE>;
+			status = "disabled";
+		};
+
+		uart14: serial@407e0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART14_GATE>;
+			status = "disabled";
+		};
+
+		uart15: serial@407f0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407f0000 0x0 0x100>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART15_GATE>;
+			status = "disabled";
+		};
+
+		uart16: serial@40880000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40880000 0x0 0x100>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART16_GATE>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
new file mode 100644
index 0000000000..ecd171b2fe
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include <dt-bindings/clock/nuvoton,npcm845-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		gcr: system-controller@f0800000 {
+			compatible = "nuvoton,npcm845-gcr", "syscon";
+			reg = <0x0 0xf0800000 0x0 0x1000>;
+		};
+
+		gic: interrupt-controller@dfff9000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xdfff9000 0x0 0x1000>,
+			      <0x0 0xdfffa000 0x0 0x2000>,
+			      <0x0 0xdfffc000 0x0 0x2000>,
+			      <0x0 0xdfffe000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#address-cells = <0>;
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+			};
+		};
+	};
+
+	ahb {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		rstc: reset-controller@f0801000 {
+			compatible = "nuvoton,npcm845-reset";
+			reg = <0x0 0xf0801000 0x0 0x78>;
+			#reset-cells = <2>;
+			nuvoton,sysgcr = <&gcr>;
+		};
+
+		clk: clock-controller@f0801000 {
+			compatible = "nuvoton,npcm845-clk";
+			#clock-cells = <1>;
+			reg = <0x0 0xf0801000 0x0 0x1000>;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0x0 0xf0000000 0x00300000>,
+				<0xfff00000 0x0 0xfff00000 0x00016000>;
+
+			peci: peci-controller@100000 {
+				compatible = "nuvoton,npcm845-peci";
+				reg = <0x100000 0x1000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM8XX_CLK_APB3>;
+				cmd-timeout-ms = <1000>;
+				status = "disabled";
+			};
+
+			timer0: timer@8000 {
+				compatible = "nuvoton,npcm845-timer";
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x8000 0x1C>;
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clock-names = "refclk";
+			};
+
+			serial0: serial@0 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x0 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial1: serial@1000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x1000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial2: serial@2000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x2000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial3: serial@3000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x3000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial4: serial@4000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x4000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial5: serial@5000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x5000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial6: serial@6000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x6000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			watchdog0: watchdog@801c {
+				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x801c 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				syscon = <&gcr>;
+			};
+
+			watchdog1: watchdog@901c {
+				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x901c 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				syscon = <&gcr>;
+			};
+
+			watchdog2: watchdog@a01c {
+				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xa01c 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				syscon = <&gcr>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
new file mode 100644
index 0000000000..a5ab2bc0f8
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+/dts-v1/;
+#include "nuvoton-npcm845.dtsi"
+
+/ {
+	model = "Nuvoton npcm845 Development Board (Device Tree)";
+	compatible = "nuvoton,npcm845-evb", "nuvoton,npcm845";
+
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	memory {
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&watchdog1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
new file mode 100644
index 0000000000..383938dcd3
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include "nuvoton-common-npcm8xx.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible      = "arm,psci-1.0";
+		method          = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
new file mode 100644
index 0000000000..c38c809fe5
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Enables support for device-tree overlays
+DTC_FLAGS_tegra210-p2371-2180 := -@
+DTC_FLAGS_tegra210-p3450-0000 := -@
+DTC_FLAGS_tegra186-p2771-0000 := -@
+DTC_FLAGS_tegra186-p3509-0000+p3636-0001 := -@
+DTC_FLAGS_tegra194-p2972-0000 := -@
+DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@
+DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@
+DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@
+DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@
+DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@
+DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@
+
+dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
+dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p3509-0000+p3636-0001.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0005.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
new file mode 100644
index 0000000000..bbc2e9bef0
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -0,0 +1,1195 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra132.dtsi"
+
+/ {
+	model = "NVIDIA Tegra132 Norrin";
+	compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/as3722@40";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "disabled";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@54540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
+			vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux: dpaux@545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	gpu@57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_default>;
+
+		pinmux_default: pinmux {
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+					      "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4",
+					      "pg5",
+					      "pg6",
+					      "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0",
+					      "kb_row15_ps7",
+					      "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "kb_col4_pq4",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5",
+					      "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mic_det_l {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_ap {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			en_vdd_sd {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lid_open {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5",
+					      "usb_vbus_en2_pff1";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+			ac_ok {
+				nvidia,pins = "pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			codec_irq_l {
+				nvidia,pins = "ph4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_bl_en {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch_irq_l {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tpm_davint_l {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_irq_l {
+				nvidia,pins = "pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_reset_l {
+				nvidia,pins = "pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <1>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ts_shdn_l {
+				nvidia,pins = "pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sensor_irq_l {
+				nvidia,pins = "pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wifi_en {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			chromeos_write_protect {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp_det_l {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			soc_warm_reset_l {
+				nvidia,pins = "pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		as3722: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio2_4_7 {
+					pins = "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3 {
+					pins = "gpio3";
+					function = "gpio";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+
+				gpio6 {
+					pins = "gpio6";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_sys>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@7000d400 {
+		status = "okay";
+
+		ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <3000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c_20: i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735@9 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+				};
+
+				battery: smart-battery@b {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <10>;
+				/*	power-supplies = <&charger>; */
+				};
+			};
+
+			keyboard-controller {
+				compatible = "google,cros-ec-keyb";
+				keypad,num-rows = <8>;
+				keypad,num-columns = <13>;
+				google,needs-ghost-filter;
+				linux,keymap =
+					<MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+					 MATRIX_KEY(0x00, 0x02, KEY_F1)
+					 MATRIX_KEY(0x00, 0x03, KEY_B)
+					 MATRIX_KEY(0x00, 0x04, KEY_F10)
+					 MATRIX_KEY(0x00, 0x06, KEY_N)
+					 MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+					 MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+					 MATRIX_KEY(0x01, 0x01, KEY_ESC)
+					 MATRIX_KEY(0x01, 0x02, KEY_F4)
+					 MATRIX_KEY(0x01, 0x03, KEY_G)
+					 MATRIX_KEY(0x01, 0x04, KEY_F7)
+					 MATRIX_KEY(0x01, 0x06, KEY_H)
+					 MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+					 MATRIX_KEY(0x01, 0x09, KEY_F9)
+					 MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+
+					 MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+					 MATRIX_KEY(0x02, 0x01, KEY_TAB)
+					 MATRIX_KEY(0x02, 0x02, KEY_F3)
+					 MATRIX_KEY(0x02, 0x03, KEY_T)
+					 MATRIX_KEY(0x02, 0x04, KEY_F6)
+					 MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+					 MATRIX_KEY(0x02, 0x06, KEY_Y)
+					 MATRIX_KEY(0x02, 0x07, KEY_102ND)
+					 MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+					 MATRIX_KEY(0x02, 0x09, KEY_F8)
+
+					 MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+					 MATRIX_KEY(0x03, 0x02, KEY_F2)
+					 MATRIX_KEY(0x03, 0x03, KEY_5)
+					 MATRIX_KEY(0x03, 0x04, KEY_F5)
+					 MATRIX_KEY(0x03, 0x06, KEY_6)
+					 MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+					 MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+
+					 MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+					 MATRIX_KEY(0x04, 0x01, KEY_A)
+					 MATRIX_KEY(0x04, 0x02, KEY_D)
+					 MATRIX_KEY(0x04, 0x03, KEY_F)
+					 MATRIX_KEY(0x04, 0x04, KEY_S)
+					 MATRIX_KEY(0x04, 0x05, KEY_K)
+					 MATRIX_KEY(0x04, 0x06, KEY_J)
+					 MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+					 MATRIX_KEY(0x04, 0x09, KEY_L)
+					 MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+					 MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+					 MATRIX_KEY(0x05, 0x01, KEY_Z)
+					 MATRIX_KEY(0x05, 0x02, KEY_C)
+					 MATRIX_KEY(0x05, 0x03, KEY_V)
+					 MATRIX_KEY(0x05, 0x04, KEY_X)
+					 MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+					 MATRIX_KEY(0x05, 0x06, KEY_M)
+					 MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+					 MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+					 MATRIX_KEY(0x05, 0x09, KEY_DOT)
+					 MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+					 MATRIX_KEY(0x06, 0x01, KEY_1)
+					 MATRIX_KEY(0x06, 0x02, KEY_3)
+					 MATRIX_KEY(0x06, 0x03, KEY_4)
+					 MATRIX_KEY(0x06, 0x04, KEY_2)
+					 MATRIX_KEY(0x06, 0x05, KEY_8)
+					 MATRIX_KEY(0x06, 0x06, KEY_7)
+					 MATRIX_KEY(0x06, 0x08, KEY_0)
+					 MATRIX_KEY(0x06, 0x09, KEY_9)
+					 MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+					 MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+					 MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+					 MATRIX_KEY(0x07, 0x01, KEY_Q)
+					 MATRIX_KEY(0x07, 0x02, KEY_E)
+					 MATRIX_KEY(0x07, 0x03, KEY_R)
+					 MATRIX_KEY(0x07, 0x04, KEY_W)
+					 MATRIX_KEY(0x07, 0x05, KEY_I)
+					 MATRIX_KEY(0x07, 0x06, KEY_U)
+					 MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+					 MATRIX_KEY(0x07, 0x08, KEY_P)
+					 MATRIX_KEY(0x07, 0x09, KEY_O)
+					 MATRIX_KEY(0x07, 0x0b, KEY_UP)
+					 MATRIX_KEY(0x07, 0x0c, KEY_LEFT)>;
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+
+				vbus-supply = <&vdd_usb1_vbus>;
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_run_cam>;
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	/* WIFI/BT module */
+	mmc@700b0000 {
+		status = "disabled";
+	};
+
+	/* external SD/MMC */
+	mmc@700b0400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		status = "okay";
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EMMC 4.51 */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		switch-lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;
+			linux,code = <0>;
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,n116bge";
+		power-supply = <&vdd_3v3_panel>;
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&dpaux>;
+	};
+
+	vdd_mux: regulator-vdd-mux {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <19000000>;
+		regulator-max-microvolt = <19000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_run: regulator-vdd-3v3-run {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_hdmi: regulator-vdd-3v3-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_led: regulator-vdd-led {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_usb1_vbus: regulator-vdd-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb3_vbus: regulator-vdd-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_panel: regulator-vdd-3v3-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi_pll: regulator-vdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
+
+	vdd_5v0_hdmi: regulator-vdd-5v0-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_5v0_ts: regulator-vdd-5v0-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_3v3_lp0: regulator-vdd-3v3-lp0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-peripherals-opp.dtsi b/arch/arm64/boot/dts/nvidia/tegra132-peripherals-opp.dtsi
new file mode 100644
index 0000000000..66ffb7f8aa
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra132-peripherals-opp.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/* EMC DVFS OPP table */
+	emc_icc_dvfs_opp_table: opp-table-dvfs0 {
+		compatible = "operating-points-v2";
+
+		opp-12750000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-12750000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-12750000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-12750000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-20400000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-20400000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-20400000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-20400000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-40800000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-40800000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-40800000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-40800000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-68000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-68000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-68000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-68000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-102000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-102000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-102000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-102000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-204000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0003>;
+			opp-suspend;
+		};
+
+		opp-204000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0008>;
+			opp-suspend;
+		};
+
+		opp-204000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0010>;
+			opp-suspend;
+		};
+
+		opp-204000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0004>;
+			opp-suspend;
+		};
+
+		opp-264000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-264000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-264000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-264000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-300000000-850 {
+			opp-microvolt = <850000 850000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-300000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-300000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-300000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-348000000-850 {
+			opp-microvolt = <850000 850000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-348000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-348000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-348000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-396000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-396000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-396000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-396000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-528000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-528000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-528000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-528000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-600000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-600000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-600000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-600000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-792000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x000B>;
+		};
+
+		opp-792000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-792000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-924000000-1100 {
+			opp-microvolt = <1100000 1100000 1150000>;
+			opp-hz = /bits/ 64 <924000000>;
+			opp-supported-hw = <0x0013>;
+		};
+
+		opp-1200000000-1100 {
+			opp-microvolt = <1100000 1100000 1150000>;
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x0003>;
+		};
+	};
+
+	/* EMC bandwidth OPP table */
+	emc_bw_dfs_opp_table: opp-table-dvfs1 {
+		compatible = "operating-points-v2";
+
+		opp-12750000 {
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <204000>;
+		};
+
+		opp-20400000 {
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <326400>;
+		};
+
+		opp-40800000 {
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <652800>;
+		};
+
+		opp-68000000 {
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <1088000>;
+		};
+
+		opp-102000000 {
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		opp-204000000 {
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <3264000>;
+			opp-suspend;
+		};
+
+		opp-264000000 {
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <4224000>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <4800000>;
+		};
+
+		opp-348000000 {
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <5568000>;
+		};
+
+		opp-396000000 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <6336000>;
+		};
+
+		opp-528000000 {
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <8448000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <9600000>;
+		};
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <12672000>;
+		};
+
+		opp-924000000 {
+			opp-hz = /bits/ 64 <924000000>;
+			opp-supported-hw = <0x0013>;
+			opp-peak-kBps = <14784000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <19200000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
new file mode 100644
index 0000000000..8b78be8f4f
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -0,0 +1,1262 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra124-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra124-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+#include "tegra132-peripherals-opp.dtsi"
+
+/ {
+	compatible = "nvidia,tegra132", "nvidia,tegra124";
+	interrupt-parent = <&lic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	pcie@1003000 {
+		compatible = "nvidia,tegra124-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+			 <&tegra_car TEGRA124_CLK_AFI>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>,
+			 <&tegra_car TEGRA124_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra132-host1x",
+			     "nvidia,tegra124-host1x";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
+
+		dc@54200000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>;
+			clock-names = "dc";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>;
+			clock-names = "dc";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra124-hdmi";
+			reg = <0x0 0x54280000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		sor@54540000 {
+			compatible = "nvidia,tegra124-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_SOR0_OUT>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>,
+				 <&tegra_car TEGRA124_CLK_CLK_M>;
+			clock-names = "sor", "out", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux: dpaux@545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x2000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gpu@57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr";
+		reg = <0x0 0x60004000 0x0 0x100>,
+		      <0x0 0x60004100 0x0 0x100>,
+		      <0x0 0x60004200 0x0 0x100>,
+		      <0x0 0x60004300 0x0 0x100>,
+		      <0x0 0x60004400 0x0 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
+		clock-names = "timer";
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra132-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		nvidia,external-memory-controller = <&emc>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	actmon@6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+		operating-points-v2 = <&emc_bw_dfs_opp_table>;
+		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
+		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbdma: dma@60020000 {
+		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
+		clock-names = "dma";
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra124-pinmux";
+		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
+		      <0x0 0x70000820 0x0 0x008>; /* MIPI pad control */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performance. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA124_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d100 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000dc00 0x0 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000de00 0x0 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra124-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra132-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+		#reset-cells = <1>;
+		#interconnect-cells = <1>;
+	};
+
+	emc: external-memory-controller@7001b000 {
+		compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "emc";
+
+		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
+
+		#interconnect-cells = <0>;
+	};
+
+	sata@70020000 {
+		compatible = "nvidia,tegra124-ahci";
+		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
+		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SATA>,
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
+		resets = <&tegra_car 124>,
+			 <&tegra_car 129>,
+			 <&tegra_car 123>;
+		reset-names = "sata", "sata-cold", "sata-oob";
+		status = "disabled";
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra132-hda", "nvidia,tegra124-hda",
+			     "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_HDA>,
+		         <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	usb@70090000 {
+		compatible = "nvidia,tegra132-xusb", "nvidia,tegra124-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA124_CLK_CLK_M>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra132-xusb-padctl",
+			     "nvidia,tegra124-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		pads {
+			usb2 {
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			ulpi {
+				status = "disabled";
+
+				lanes {
+					ulpi-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			hsic-1 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+		};
+	};
+
+	mmc@700b0000 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0200 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0400 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0600 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra132-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600>, /* 0: SOC_THERM reg_base */
+		      <0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+		reg-names = "soctherm-reg", "ccroc-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "thermal", "edp";
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+		         <&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	ahub@70300000 {
+		compatible = "nvidia,tegra124-ahub";
+		reg = <0x0 0x70300000 0x0 0x200>,
+		      <0x0 0x70300800 0x0 0x800>,
+		      <0x0 0x70300200 0x0 0x600>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA124_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 185>, /* amx1 */
+			 <&tegra_car 154>, /* adx */
+			 <&tegra_car 180>, /* adx1 */
+			 <&tegra_car 186>, /* afc0 */
+			 <&tegra_car 187>, /* afc1 */
+			 <&tegra_car 188>, /* afc2 */
+			 <&tegra_car 189>, /* afc3 */
+			 <&tegra_car 190>, /* afc4 */
+			 <&tegra_car 191>; /* afc5 */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "amx1", "adx", "adx1",
+			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		tegra_i2s0: i2s@70301000 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301000 0x0 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+			clock-names = "i2s";
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70301100 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301100 0x0 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+			clock-names = "i2s";
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70301200 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301200 0x0 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+			clock-names = "i2s";
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70301300 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301300 0x0 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+			clock-names = "i2s";
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70301400 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301400 0x0 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+			clock-names = "i2s";
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "usb";
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+		clock-names = "usb";
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 1>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d008000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>;
+		clock-names = "usb";
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d008000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "nvidia,tegra132-denver";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "nvidia,tegra132-denver";
+			reg = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <102000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+				mem_throttle_trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		pllx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+				pllx_throttle_trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
new file mode 100644
index 0000000000..15aa49fc45
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -0,0 +1,2624 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra186-p3310.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX2 Developer Kit";
+	compatible = "nvidia,p2771-0000", "nvidia,tegra186";
+
+	aconnect@2900000 {
+		status = "okay";
+
+		ahub@2900800 {
+			status = "okay";
+
+			i2s@2901000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s1_ep>;
+						};
+					};
+
+					i2s1_port: port@1 {
+						reg = <1>;
+
+						i2s1_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s2_ep>;
+						};
+					};
+
+					i2s2_port: port@1 {
+						reg = <1>;
+
+						i2s2_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s3_ep>;
+						};
+					};
+
+					i2s3_port: port@1 {
+						reg = <1>;
+
+						i2s3_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901300 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s4_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s4_ep>;
+						};
+					};
+
+					i2s4_port: port@1 {
+						reg = <1>;
+
+						i2s4_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s5_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s5_ep>;
+						};
+					};
+
+					i2s5_port: port@1 {
+						reg = <1>;
+
+						i2s5_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901500 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s6_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s6_ep>;
+						};
+					};
+
+					i2s6_port: port@1 {
+						reg = <1>;
+
+						i2s6_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			sfc@2902000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_in_ep>;
+							convert-rate = <44100>;
+						};
+					};
+
+					sfc1_out_port: port@1 {
+						reg = <1>;
+
+						sfc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_out_ep>;
+							convert-rate = <48000>;
+						};
+					};
+				};
+			};
+
+			sfc@2902200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_in_ep>;
+						};
+					};
+
+					sfc2_out_port: port@1 {
+						reg = <1>;
+
+						sfc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@2902400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc3_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_in_ep>;
+						};
+					};
+
+					sfc3_out_port: port@1 {
+						reg = <1>;
+
+						sfc3_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@2902600 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc4_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_in_ep>;
+						};
+					};
+
+					sfc4_out_port: port@1 {
+						reg = <1>;
+
+						sfc4_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@2903000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx1_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx1_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx1_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx1_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in4_ep>;
+						};
+					};
+
+					amx1_out_port: port@4 {
+						reg = <4>;
+
+						amx1_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@2903100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx2_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx2_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in2_ep>;
+						};
+					};
+
+					amx2_in3_port: port@2 {
+						reg = <2>;
+
+						amx2_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in3_ep>;
+						};
+					};
+
+					amx2_in4_port: port@3 {
+						reg = <3>;
+
+						amx2_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in4_ep>;
+						};
+					};
+
+					amx2_out_port: port@4 {
+						reg = <4>;
+
+						amx2_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@2903200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx3_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx3_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx3_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx3_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_in4_ep>;
+						};
+					};
+
+					amx3_out_port: port@4 {
+						reg = <4>;
+
+						amx3_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@2903300 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx4_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx4_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx4_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx4_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_in4_ep>;
+						};
+					};
+
+					amx4_out_port: port@4 {
+						reg = <4>;
+
+						amx4_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_out_ep>;
+						};
+					};
+				};
+			};
+
+			adx@2903800 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx1_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_in_ep>;
+						};
+					};
+
+					adx1_out1_port: port@1 {
+						reg = <1>;
+
+						adx1_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out1_ep>;
+						};
+					};
+
+					adx1_out2_port: port@2 {
+						reg = <2>;
+
+						adx1_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out2_ep>;
+						};
+					};
+
+					adx1_out3_port: port@3 {
+						reg = <3>;
+
+						adx1_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out3_ep>;
+						};
+					};
+
+					adx1_out4_port: port@4 {
+						reg = <4>;
+
+						adx1_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@2903900 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx2_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_in_ep>;
+						};
+					};
+
+					adx2_out1_port: port@1 {
+						reg = <1>;
+
+						adx2_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out1_ep>;
+						};
+					};
+
+					adx2_out2_port: port@2 {
+						reg = <2>;
+
+						adx2_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out2_ep>;
+						};
+					};
+
+					adx2_out3_port: port@3 {
+						reg = <3>;
+
+						adx2_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out3_ep>;
+						};
+					};
+
+					adx2_out4_port: port@4 {
+						reg = <4>;
+
+						adx2_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@2903a00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx3_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_in_ep>;
+						};
+					};
+
+					adx3_out1_port: port@1 {
+						reg = <1>;
+
+						adx3_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_out1_ep>;
+						};
+					};
+
+					adx3_out2_port: port@2 {
+						reg = <2>;
+
+						adx3_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_out2_ep>;
+						};
+					};
+
+					adx3_out3_port: port@3 {
+						reg = <3>;
+
+						adx3_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_out3_ep>;
+						};
+					};
+
+					adx3_out4_port: port@4 {
+						reg = <4>;
+
+						adx3_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@2903b00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx4_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_in_ep>;
+						};
+					};
+
+					adx4_out1_port: port@1 {
+						reg = <1>;
+
+						adx4_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_out1_ep>;
+						};
+					};
+
+					adx4_out2_port: port@2 {
+						reg = <2>;
+
+						adx4_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_out2_ep>;
+						};
+					};
+
+					adx4_out3_port: port@3 {
+						reg = <3>;
+
+						adx4_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_out3_ep>;
+						};
+					};
+
+					adx4_out4_port: port@4 {
+						reg = <4>;
+
+						adx4_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_out4_ep>;
+						};
+					};
+				};
+			};
+
+			dmic@2904000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic3_ep>;
+						};
+					};
+
+					dmic3_port: port@1 {
+						reg = <1>;
+
+						dmic3_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dspk@2905000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dspk1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dspk1_ep>;
+						};
+					};
+
+					dspk1_port: port@1 {
+						reg = <1>;
+
+						dspk1_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dspk@2905100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dspk2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dspk2_ep>;
+						};
+					};
+
+					dspk2_port: port@1 {
+						reg = <1>;
+
+						dspk2_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			processing-engine@2908000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_in_ep>;
+						};
+					};
+
+					ope1_out_port: port@1 {
+						reg = <0x1>;
+
+						ope1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@290a000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_in_ep>;
+						};
+					};
+
+					mvc1_out_port: port@1 {
+						reg = <1>;
+
+						mvc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@290a200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_in_ep>;
+						};
+					};
+
+					mvc2_out_port: port@1 {
+						reg = <1>;
+
+						mvc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			amixer@290bb00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						mixer_in1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						mixer_in2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						mixer_in3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						mixer_in4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in4_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						mixer_in5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in5_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						mixer_in6_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in6_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						mixer_in7_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in7_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						mixer_in8_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in8_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						mixer_in9_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in9_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						mixer_in10_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in10_ep>;
+						};
+					};
+
+					mixer_out1_port: port@a {
+						reg = <0xa>;
+
+						mixer_out1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out1_ep>;
+						};
+					};
+
+					mixer_out2_port: port@b {
+						reg = <0xb>;
+
+						mixer_out2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out2_ep>;
+						};
+					};
+
+					mixer_out3_port: port@c {
+						reg = <0xc>;
+
+						mixer_out3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out3_ep>;
+						};
+					};
+
+					mixer_out4_port: port@d {
+						reg = <0xd>;
+
+						mixer_out4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out4_ep>;
+						};
+					};
+
+					mixer_out5_port: port@e {
+						reg = <0xe>;
+
+						mixer_out5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out5_ep>;
+						};
+					};
+				};
+			};
+
+			admaif@290f000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					admaif0_port: port@0 {
+						reg = <0x0>;
+
+						admaif0_ep: endpoint {
+							remote-endpoint = <&xbar_admaif0_ep>;
+						};
+					};
+
+					admaif1_port: port@1 {
+						reg = <0x1>;
+
+						admaif1_ep: endpoint {
+							remote-endpoint = <&xbar_admaif1_ep>;
+						};
+					};
+
+					admaif2_port: port@2 {
+						reg = <0x2>;
+
+						admaif2_ep: endpoint {
+							remote-endpoint = <&xbar_admaif2_ep>;
+						};
+					};
+
+					admaif3_port: port@3 {
+						reg = <0x3>;
+
+						admaif3_ep: endpoint {
+							remote-endpoint = <&xbar_admaif3_ep>;
+						};
+					};
+
+					admaif4_port: port@4 {
+						reg = <0x4>;
+
+						admaif4_ep: endpoint {
+							remote-endpoint = <&xbar_admaif4_ep>;
+						};
+					};
+
+					admaif5_port: port@5 {
+						reg = <0x5>;
+
+						admaif5_ep: endpoint {
+							remote-endpoint = <&xbar_admaif5_ep>;
+						};
+					};
+
+					admaif6_port: port@6 {
+						reg = <0x6>;
+
+						admaif6_ep: endpoint {
+							remote-endpoint = <&xbar_admaif6_ep>;
+						};
+					};
+
+					admaif7_port: port@7 {
+						reg = <0x7>;
+
+						admaif7_ep: endpoint {
+							remote-endpoint = <&xbar_admaif7_ep>;
+						};
+					};
+
+					admaif8_port: port@8 {
+						reg = <0x8>;
+
+						admaif8_ep: endpoint {
+							remote-endpoint = <&xbar_admaif8_ep>;
+						};
+					};
+
+					admaif9_port: port@9 {
+						reg = <0x9>;
+
+						admaif9_ep: endpoint {
+							remote-endpoint = <&xbar_admaif9_ep>;
+						};
+					};
+
+					admaif10_port: port@a {
+						reg = <0xa>;
+
+						admaif10_ep: endpoint {
+							remote-endpoint = <&xbar_admaif10_ep>;
+						};
+					};
+
+					admaif11_port: port@b {
+						reg = <0xb>;
+
+						admaif11_ep: endpoint {
+							remote-endpoint = <&xbar_admaif11_ep>;
+						};
+					};
+
+					admaif12_port: port@c {
+						reg = <0xc>;
+
+						admaif12_ep: endpoint {
+							remote-endpoint = <&xbar_admaif12_ep>;
+						};
+					};
+
+					admaif13_port: port@d {
+						reg = <0xd>;
+
+						admaif13_ep: endpoint {
+							remote-endpoint = <&xbar_admaif13_ep>;
+						};
+					};
+
+					admaif14_port: port@e {
+						reg = <0xe>;
+
+						admaif14_ep: endpoint {
+							remote-endpoint = <&xbar_admaif14_ep>;
+						};
+					};
+
+					admaif15_port: port@f {
+						reg = <0xf>;
+
+						admaif15_ep: endpoint {
+							remote-endpoint = <&xbar_admaif15_ep>;
+						};
+					};
+
+					admaif16_port: port@10 {
+						reg = <0x10>;
+
+						admaif16_ep: endpoint {
+							remote-endpoint = <&xbar_admaif16_ep>;
+						};
+					};
+
+					admaif17_port: port@11 {
+						reg = <0x11>;
+
+						admaif17_ep: endpoint {
+							remote-endpoint = <&xbar_admaif17_ep>;
+						};
+					};
+
+					admaif18_port: port@12 {
+						reg = <0x12>;
+
+						admaif18_ep: endpoint {
+							remote-endpoint = <&xbar_admaif18_ep>;
+						};
+					};
+
+					admaif19_port: port@13 {
+						reg = <0x13>;
+
+						admaif19_ep: endpoint {
+							remote-endpoint = <&xbar_admaif19_ep>;
+						};
+					};
+				};
+			};
+
+			asrc@2910000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						asrc_in1_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						asrc_in2_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						asrc_in3_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						asrc_in4_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in4_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						asrc_in5_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in5_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						asrc_in6_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in6_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						asrc_in7_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in7_ep>;
+						};
+					};
+
+					asrc_out1_port: port@7 {
+						reg = <0x7>;
+
+						asrc_out1_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out1_ep>;
+						};
+					};
+
+					asrc_out2_port: port@8 {
+						reg = <0x8>;
+
+						asrc_out2_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out2_ep>;
+						};
+					};
+
+					asrc_out3_port: port@9 {
+						reg = <0x9>;
+
+						asrc_out3_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out3_ep>;
+						};
+					};
+
+					asrc_out4_port: port@a {
+						reg = <0xa>;
+
+						asrc_out4_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out4_ep>;
+						};
+					};
+
+					asrc_out5_port: port@b {
+						reg = <0xb>;
+
+						asrc_out5_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out5_ep>;
+						};
+					};
+
+					asrc_out6_port: port@c {
+						reg = <0xc>;
+
+						asrc_out6_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out6_ep>;
+						};
+					};
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					xbar_admaif0_ep: endpoint {
+						remote-endpoint = <&admaif0_ep>;
+					};
+				};
+
+				port@1 {
+					reg = <0x1>;
+
+					xbar_admaif1_ep: endpoint {
+						remote-endpoint = <&admaif1_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <0x2>;
+
+					xbar_admaif2_ep: endpoint {
+						remote-endpoint = <&admaif2_ep>;
+					};
+				};
+
+				port@3 {
+					reg = <0x3>;
+
+					xbar_admaif3_ep: endpoint {
+						remote-endpoint = <&admaif3_ep>;
+					};
+				};
+
+				port@4 {
+					reg = <0x4>;
+
+					xbar_admaif4_ep: endpoint {
+						remote-endpoint = <&admaif4_ep>;
+					};
+				};
+
+				port@5 {
+					reg = <0x5>;
+
+					xbar_admaif5_ep: endpoint {
+						remote-endpoint = <&admaif5_ep>;
+					};
+				};
+
+				port@6 {
+					reg = <0x6>;
+
+					xbar_admaif6_ep: endpoint {
+						remote-endpoint = <&admaif6_ep>;
+					};
+				};
+
+				port@7 {
+					reg = <0x7>;
+
+					xbar_admaif7_ep: endpoint {
+						remote-endpoint = <&admaif7_ep>;
+					};
+				};
+
+				port@8 {
+					reg = <0x8>;
+
+					xbar_admaif8_ep: endpoint {
+						remote-endpoint = <&admaif8_ep>;
+					};
+				};
+
+				port@9 {
+					reg = <0x9>;
+
+					xbar_admaif9_ep: endpoint {
+						remote-endpoint = <&admaif9_ep>;
+					};
+				};
+
+				port@a {
+					reg = <0xa>;
+
+					xbar_admaif10_ep: endpoint {
+						remote-endpoint = <&admaif10_ep>;
+					};
+				};
+
+				port@b {
+					reg = <0xb>;
+
+					xbar_admaif11_ep: endpoint {
+						remote-endpoint = <&admaif11_ep>;
+					};
+				};
+
+				port@c {
+					reg = <0xc>;
+
+					xbar_admaif12_ep: endpoint {
+						remote-endpoint = <&admaif12_ep>;
+					};
+				};
+
+				port@d {
+					reg = <0xd>;
+
+					xbar_admaif13_ep: endpoint {
+						remote-endpoint = <&admaif13_ep>;
+					};
+				};
+
+				port@e {
+					reg = <0xe>;
+
+					xbar_admaif14_ep: endpoint {
+						remote-endpoint = <&admaif14_ep>;
+					};
+				};
+
+				port@f {
+					reg = <0xf>;
+
+					xbar_admaif15_ep: endpoint {
+						remote-endpoint = <&admaif15_ep>;
+					};
+				};
+
+				port@10 {
+					reg = <0x10>;
+
+					xbar_admaif16_ep: endpoint {
+						remote-endpoint = <&admaif16_ep>;
+					};
+				};
+
+				port@11 {
+					reg = <0x11>;
+
+					xbar_admaif17_ep: endpoint {
+						remote-endpoint = <&admaif17_ep>;
+					};
+				};
+
+				port@12 {
+					reg = <0x12>;
+
+					xbar_admaif18_ep: endpoint {
+						remote-endpoint = <&admaif18_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_admaif19_ep: endpoint {
+						remote-endpoint = <&admaif19_ep>;
+					};
+				};
+
+				xbar_i2s1_port: port@14 {
+					reg = <0x14>;
+
+					xbar_i2s1_ep: endpoint {
+						remote-endpoint = <&i2s1_cif_ep>;
+					};
+				};
+
+				xbar_i2s2_port: port@15 {
+					reg = <0x15>;
+
+					xbar_i2s2_ep: endpoint {
+						remote-endpoint = <&i2s2_cif_ep>;
+					};
+				};
+
+				xbar_i2s3_port: port@16 {
+					reg = <0x16>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_i2s4_port: port@17 {
+					reg = <0x17>;
+
+					xbar_i2s4_ep: endpoint {
+						remote-endpoint = <&i2s4_cif_ep>;
+					};
+				};
+
+				xbar_i2s5_port: port@18 {
+					reg = <0x18>;
+
+					xbar_i2s5_ep: endpoint {
+						remote-endpoint = <&i2s5_cif_ep>;
+					};
+				};
+
+				xbar_i2s6_port: port@19 {
+					reg = <0x19>;
+
+					xbar_i2s6_ep: endpoint {
+						remote-endpoint = <&i2s6_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@1b {
+					reg = <0x1b>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+
+				xbar_dmic3_port: port@1c {
+					reg = <0x1c>;
+
+					xbar_dmic3_ep: endpoint {
+						remote-endpoint = <&dmic3_cif_ep>;
+					};
+				};
+
+				xbar_dspk1_port: port@1e {
+					reg = <0x1e>;
+
+					xbar_dspk1_ep: endpoint {
+						remote-endpoint = <&dspk1_cif_ep>;
+					};
+				};
+
+				xbar_dspk2_port: port@1f {
+					reg = <0x1f>;
+
+					xbar_dspk2_ep: endpoint {
+						remote-endpoint = <&dspk2_cif_ep>;
+					};
+				};
+
+				xbar_sfc1_in_port: port@20 {
+					reg = <0x20>;
+
+					xbar_sfc1_in_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_in_ep>;
+					};
+				};
+
+				port@21 {
+					reg = <0x21>;
+
+					xbar_sfc1_out_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc2_in_port: port@22 {
+					reg = <0x22>;
+
+					xbar_sfc2_in_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_in_ep>;
+					};
+				};
+
+				port@23 {
+					reg = <0x23>;
+
+					xbar_sfc2_out_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc3_in_port: port@24 {
+					reg = <0x24>;
+
+					xbar_sfc3_in_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_in_ep>;
+					};
+				};
+
+				port@25 {
+					reg = <0x25>;
+
+					xbar_sfc3_out_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc4_in_port: port@26 {
+					reg = <0x26>;
+
+					xbar_sfc4_in_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_in_ep>;
+					};
+				};
+
+				port@27 {
+					reg = <0x27>;
+
+					xbar_sfc4_out_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc1_in_port: port@28 {
+					reg = <0x28>;
+
+					xbar_mvc1_in_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_in_ep>;
+					};
+				};
+
+				port@29 {
+					reg = <0x29>;
+
+					xbar_mvc1_out_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc2_in_port: port@2a {
+					reg = <0x2a>;
+
+					xbar_mvc2_in_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_in_ep>;
+					};
+				};
+
+				port@2b {
+					reg = <0x2b>;
+
+					xbar_mvc2_out_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_out_ep>;
+					};
+				};
+
+				xbar_amx1_in1_port: port@2c {
+					reg = <0x2c>;
+
+					xbar_amx1_in1_ep: endpoint {
+						remote-endpoint = <&amx1_in1_ep>;
+					};
+				};
+
+				xbar_amx1_in2_port: port@2d {
+					reg = <0x2d>;
+
+					xbar_amx1_in2_ep: endpoint {
+						remote-endpoint = <&amx1_in2_ep>;
+					};
+				};
+
+				xbar_amx1_in3_port: port@2e {
+					reg = <0x2e>;
+
+					xbar_amx1_in3_ep: endpoint {
+						remote-endpoint = <&amx1_in3_ep>;
+					};
+				};
+
+				xbar_amx1_in4_port: port@2f {
+					reg = <0x2f>;
+
+					xbar_amx1_in4_ep: endpoint {
+						remote-endpoint = <&amx1_in4_ep>;
+					};
+				};
+
+				port@30 {
+					reg = <0x30>;
+
+					xbar_amx1_out_ep: endpoint {
+						remote-endpoint = <&amx1_out_ep>;
+					};
+				};
+
+				xbar_amx2_in1_port: port@31 {
+					reg = <0x31>;
+
+					xbar_amx2_in1_ep: endpoint {
+						remote-endpoint = <&amx2_in1_ep>;
+					};
+				};
+
+				xbar_amx2_in2_port: port@32 {
+					reg = <0x32>;
+
+					xbar_amx2_in2_ep: endpoint {
+						remote-endpoint = <&amx2_in2_ep>;
+					};
+				};
+
+				xbar_amx2_in3_port: port@33 {
+					reg = <0x33>;
+
+					xbar_amx2_in3_ep: endpoint {
+						remote-endpoint = <&amx2_in3_ep>;
+					};
+				};
+
+				xbar_amx2_in4_port: port@34 {
+					reg = <0x34>;
+
+					xbar_amx2_in4_ep: endpoint {
+						remote-endpoint = <&amx2_in4_ep>;
+					};
+				};
+
+				port@35 {
+					reg = <0x35>;
+
+					xbar_amx2_out_ep: endpoint {
+						remote-endpoint = <&amx2_out_ep>;
+					};
+				};
+
+				xbar_amx3_in1_port: port@36 {
+					reg = <0x36>;
+
+					xbar_amx3_in1_ep: endpoint {
+						remote-endpoint = <&amx3_in1_ep>;
+					};
+				};
+
+				xbar_amx3_in2_port: port@37 {
+					reg = <0x37>;
+
+					xbar_amx3_in2_ep: endpoint {
+						remote-endpoint = <&amx3_in2_ep>;
+					};
+				};
+
+				xbar_amx3_in3_port: port@38 {
+					reg = <0x38>;
+
+					xbar_amx3_in3_ep: endpoint {
+						remote-endpoint = <&amx3_in3_ep>;
+					};
+				};
+
+				xbar_amx3_in4_port: port@39 {
+					reg = <0x39>;
+
+					xbar_amx3_in4_ep: endpoint {
+						remote-endpoint = <&amx3_in4_ep>;
+					};
+				};
+
+				port@3a {
+					reg = <0x3a>;
+
+					xbar_amx3_out_ep: endpoint {
+						remote-endpoint = <&amx3_out_ep>;
+					};
+				};
+
+				xbar_amx4_in1_port: port@3b {
+					reg = <0x3b>;
+
+					xbar_amx4_in1_ep: endpoint {
+						remote-endpoint = <&amx4_in1_ep>;
+					};
+				};
+
+				xbar_amx4_in2_port: port@3c {
+					reg = <0x3c>;
+
+					xbar_amx4_in2_ep: endpoint {
+						remote-endpoint = <&amx4_in2_ep>;
+					};
+				};
+
+				xbar_amx4_in3_port: port@3d {
+					reg = <0x3d>;
+
+					xbar_amx4_in3_ep: endpoint {
+						remote-endpoint = <&amx4_in3_ep>;
+					};
+				};
+
+				xbar_amx4_in4_port: port@3e {
+					reg = <0x3e>;
+
+					xbar_amx4_in4_ep: endpoint {
+						remote-endpoint = <&amx4_in4_ep>;
+					};
+				};
+
+				port@3f {
+					reg = <0x3f>;
+
+					xbar_amx4_out_ep: endpoint {
+						remote-endpoint = <&amx4_out_ep>;
+					};
+				};
+
+				xbar_adx1_in_port: port@40 {
+					reg = <0x40>;
+
+					xbar_adx1_in_ep: endpoint {
+						remote-endpoint = <&adx1_in_ep>;
+					};
+				};
+
+				port@41 {
+					reg = <0x41>;
+
+					xbar_adx1_out1_ep: endpoint {
+						remote-endpoint = <&adx1_out1_ep>;
+					};
+				};
+
+				port@42 {
+					reg = <0x42>;
+
+					xbar_adx1_out2_ep: endpoint {
+						remote-endpoint = <&adx1_out2_ep>;
+					};
+				};
+
+				port@43 {
+					reg = <0x43>;
+
+					xbar_adx1_out3_ep: endpoint {
+						remote-endpoint = <&adx1_out3_ep>;
+					};
+				};
+
+				port@44 {
+					reg = <0x44>;
+
+					xbar_adx1_out4_ep: endpoint {
+						remote-endpoint = <&adx1_out4_ep>;
+					};
+				};
+
+				xbar_adx2_in_port: port@45 {
+					reg = <0x45>;
+
+					xbar_adx2_in_ep: endpoint {
+						remote-endpoint = <&adx2_in_ep>;
+					};
+				};
+
+				port@46 {
+					reg = <0x46>;
+
+					xbar_adx2_out1_ep: endpoint {
+						remote-endpoint = <&adx2_out1_ep>;
+					};
+				};
+
+				port@47 {
+					reg = <0x47>;
+
+					xbar_adx2_out2_ep: endpoint {
+						remote-endpoint = <&adx2_out2_ep>;
+					};
+				};
+
+				port@48 {
+					reg = <0x48>;
+
+					xbar_adx2_out3_ep: endpoint {
+						remote-endpoint = <&adx2_out3_ep>;
+					};
+				};
+
+				port@49 {
+					reg = <0x49>;
+
+					xbar_adx2_out4_ep: endpoint {
+						remote-endpoint = <&adx2_out4_ep>;
+					};
+				};
+
+				xbar_adx3_in_port: port@4a {
+					reg = <0x4a>;
+
+					xbar_adx3_in_ep: endpoint {
+						remote-endpoint = <&adx3_in_ep>;
+					};
+				};
+
+				port@4b {
+					reg = <0x4b>;
+
+					xbar_adx3_out1_ep: endpoint {
+						remote-endpoint = <&adx3_out1_ep>;
+					};
+				};
+
+				port@4c {
+					reg = <0x4c>;
+
+					xbar_adx3_out2_ep: endpoint {
+						remote-endpoint = <&adx3_out2_ep>;
+					};
+				};
+
+				port@4d {
+					reg = <0x4d>;
+
+					xbar_adx3_out3_ep: endpoint {
+						remote-endpoint = <&adx3_out3_ep>;
+					};
+				};
+
+				port@4e {
+					reg = <0x4e>;
+
+					xbar_adx3_out4_ep: endpoint {
+						remote-endpoint = <&adx3_out4_ep>;
+					};
+				};
+
+				xbar_adx4_in_port: port@4f {
+					reg = <0x4f>;
+
+					xbar_adx4_in_ep: endpoint {
+						remote-endpoint = <&adx4_in_ep>;
+					};
+				};
+
+				port@50 {
+					reg = <0x50>;
+
+					xbar_adx4_out1_ep: endpoint {
+						remote-endpoint = <&adx4_out1_ep>;
+					};
+				};
+
+				port@51 {
+					reg = <0x51>;
+
+					xbar_adx4_out2_ep: endpoint {
+						remote-endpoint = <&adx4_out2_ep>;
+					};
+				};
+
+				port@52 {
+					reg = <0x52>;
+
+					xbar_adx4_out3_ep: endpoint {
+						remote-endpoint = <&adx4_out3_ep>;
+					};
+				};
+
+				port@53 {
+					reg = <0x53>;
+
+					xbar_adx4_out4_ep: endpoint {
+						remote-endpoint = <&adx4_out4_ep>;
+					};
+				};
+
+				xbar_mixer_in1_port: port@54 {
+					reg = <0x54>;
+
+					xbar_mixer_in1_ep: endpoint {
+						remote-endpoint = <&mixer_in1_ep>;
+					};
+				};
+
+				xbar_mixer_in2_port: port@55 {
+					reg = <0x55>;
+
+					xbar_mixer_in2_ep: endpoint {
+						remote-endpoint = <&mixer_in2_ep>;
+					};
+				};
+
+				xbar_mixer_in3_port: port@56 {
+					reg = <0x56>;
+
+					xbar_mixer_in3_ep: endpoint {
+						remote-endpoint = <&mixer_in3_ep>;
+					};
+				};
+
+				xbar_mixer_in4_port: port@57 {
+					reg = <0x57>;
+
+					xbar_mixer_in4_ep: endpoint {
+						remote-endpoint = <&mixer_in4_ep>;
+					};
+				};
+
+				xbar_mixer_in5_port: port@58 {
+					reg = <0x58>;
+
+					xbar_mixer_in5_ep: endpoint {
+						remote-endpoint = <&mixer_in5_ep>;
+					};
+				};
+
+				xbar_mixer_in6_port: port@59 {
+					reg = <0x59>;
+
+					xbar_mixer_in6_ep: endpoint {
+						remote-endpoint = <&mixer_in6_ep>;
+					};
+				};
+
+				xbar_mixer_in7_port: port@5a {
+					reg = <0x5a>;
+
+					xbar_mixer_in7_ep: endpoint {
+						remote-endpoint = <&mixer_in7_ep>;
+					};
+				};
+
+				xbar_mixer_in8_port: port@5b {
+					reg = <0x5b>;
+
+					xbar_mixer_in8_ep: endpoint {
+						remote-endpoint = <&mixer_in8_ep>;
+					};
+				};
+
+				xbar_mixer_in9_port: port@5c {
+					reg = <0x5c>;
+
+					xbar_mixer_in9_ep: endpoint {
+						remote-endpoint = <&mixer_in9_ep>;
+					};
+				};
+
+				xbar_mixer_in10_port: port@5d {
+					reg = <0x5d>;
+
+					xbar_mixer_in10_ep: endpoint {
+						remote-endpoint = <&mixer_in10_ep>;
+					};
+				};
+
+				port@5e {
+					reg = <0x5e>;
+
+					xbar_mixer_out1_ep: endpoint {
+						remote-endpoint = <&mixer_out1_ep>;
+					};
+				};
+
+				port@5f {
+					reg = <0x5f>;
+
+					xbar_mixer_out2_ep: endpoint {
+						remote-endpoint = <&mixer_out2_ep>;
+					};
+				};
+
+				port@60 {
+					reg = <0x60>;
+
+					xbar_mixer_out3_ep: endpoint {
+						remote-endpoint = <&mixer_out3_ep>;
+					};
+				};
+
+				port@61 {
+					reg = <0x61>;
+
+					xbar_mixer_out4_ep: endpoint {
+						remote-endpoint = <&mixer_out4_ep>;
+					};
+				};
+
+				port@62 {
+					reg = <0x62>;
+
+					xbar_mixer_out5_ep: endpoint {
+						remote-endpoint = <&mixer_out5_ep>;
+					};
+				};
+
+				xbar_asrc_in1_port: port@63 {
+					reg = <0x63>;
+
+					xbar_asrc_in1_ep: endpoint {
+						remote-endpoint = <&asrc_in1_ep>;
+					};
+				};
+
+				port@64 {
+					reg = <0x64>;
+
+					xbar_asrc_out1_ep: endpoint {
+						remote-endpoint = <&asrc_out1_ep>;
+					};
+				};
+
+				xbar_asrc_in2_port: port@65 {
+					reg = <0x65>;
+
+					xbar_asrc_in2_ep: endpoint {
+						remote-endpoint = <&asrc_in2_ep>;
+					};
+				};
+
+				port@66 {
+					reg = <0x66>;
+
+					xbar_asrc_out2_ep: endpoint {
+						remote-endpoint = <&asrc_out2_ep>;
+					};
+				};
+
+				xbar_asrc_in3_port: port@67 {
+					reg = <0x67>;
+
+					xbar_asrc_in3_ep: endpoint {
+						remote-endpoint = <&asrc_in3_ep>;
+					};
+				};
+
+				port@68 {
+					reg = <0x68>;
+
+					xbar_asrc_out3_ep: endpoint {
+						remote-endpoint = <&asrc_out3_ep>;
+					};
+				};
+
+				xbar_asrc_in4_port: port@69 {
+					reg = <0x69>;
+
+					xbar_asrc_in4_ep: endpoint {
+						remote-endpoint = <&asrc_in4_ep>;
+					};
+				};
+
+				port@6a {
+					reg = <0x6a>;
+
+					xbar_asrc_out4_ep: endpoint {
+						remote-endpoint = <&asrc_out4_ep>;
+					};
+				};
+
+				xbar_asrc_in5_port: port@6b {
+					reg = <0x6b>;
+
+					xbar_asrc_in5_ep: endpoint {
+						remote-endpoint = <&asrc_in5_ep>;
+					};
+				};
+
+				port@6c {
+					reg = <0x6c>;
+
+					xbar_asrc_out5_ep: endpoint {
+						remote-endpoint = <&asrc_out5_ep>;
+					};
+				};
+
+				xbar_asrc_in6_port: port@6d {
+					reg = <0x6d>;
+
+					xbar_asrc_in6_ep: endpoint {
+						remote-endpoint = <&asrc_in6_ep>;
+					};
+				};
+
+				port@6e {
+					reg = <0x6e>;
+
+					xbar_asrc_out6_ep: endpoint {
+						remote-endpoint = <&asrc_out6_ep>;
+					};
+				};
+
+				xbar_asrc_in7_port: port@6f {
+					reg = <0x6f>;
+
+					xbar_asrc_in7_ep: endpoint {
+						remote-endpoint = <&asrc_in7_ep>;
+					};
+				};
+
+				xbar_ope1_in_port: port@70 {
+					reg = <0x70>;
+
+					xbar_ope1_in_ep: endpoint {
+						remote-endpoint = <&ope1_cif_in_ep>;
+					};
+				};
+
+				port@71 {
+					reg = <0x71>;
+
+					xbar_ope1_out_ep: endpoint {
+						remote-endpoint = <&ope1_cif_out_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@2930000 {
+			status = "okay";
+		};
+
+		interrupt-controller@2a40000 {
+			status = "okay";
+		};
+	};
+
+	i2c@3160000 {
+		power-monitor@42 {
+			compatible = "ti,ina3221";
+			reg = <0x42>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_MUX";
+				shunt-resistor-micro-ohms = <20000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_5V0_IO_SYS";
+				shunt-resistor-micro-ohms = <5000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_3V3_SYS";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+
+		power-monitor@43 {
+			compatible = "ti,ina3221";
+			reg = <0x43>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_3V3_IO_SLP";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_1V8_IO";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_M2_IN";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+
+		exp1: gpio@74 {
+			compatible = "ti,tca9539";
+			reg = <0x74>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA186_MAIN_GPIO(Y, 0)
+				      GPIO_ACTIVE_LOW>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc-supply = <&vdd_3v3_sys>;
+		};
+
+		exp2: gpio@77 {
+			compatible = "ti,tca9539";
+			reg = <0x77>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA186_MAIN_GPIO(Y, 6)
+				      GPIO_ACTIVE_LOW>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc-supply = <&vdd_1v8>;
+		};
+	};
+
+	/* SDMMC1 (SD/MMC) */
+	mmc@3400000 {
+		status = "okay";
+
+		vmmc-supply = <&vdd_sd>;
+	};
+
+	sata@3507000 {
+		status = "okay";
+	};
+
+	hda@3510000 {
+		nvidia,model = "NVIDIA Jetson TX2 HDA";
+		status = "okay";
+	};
+
+	padctl@3520000 {
+		status = "okay";
+
+		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
+		avdd-usb-supply = <&vdd_3v3_sys>;
+		vclamp-usb-supply = <&vdd_1v8>;
+		vddio-hsic-supply = <&gnd>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					micro_b: usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			usb3 {
+				status = "okay";
+
+				lanes {
+					usb3-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb3-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb3-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+				vbus-supply = <&vdd_usb0>;
+				usb-role-switch;
+
+				connector {
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpios = <&gpio
+						      TEGRA186_MAIN_GPIO(X, 7)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb1>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <1>;
+				vbus-supply = <&vdd_usb1>;
+				status = "okay";
+			};
+		};
+	};
+
+	usb@3530000 {
+		status = "okay";
+
+		phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>;
+		phy-names = "usb2-0", "usb2-1", "usb3-0";
+	};
+
+	usb@3550000 {
+		status = "okay";
+
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+	};
+
+	i2c@c250000 {
+		/* carrier board ID EEPROM */
+		eeprom@57 {
+			compatible = "atmel,24c02";
+			reg = <0x57>;
+
+			label = "system";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	pcie@10003000 {
+		status = "okay";
+
+		dvdd-pex-supply = <&vdd_pex>;
+		hvdd-pex-pll-supply = <&vdd_1v8>;
+		hvdd-pex-supply = <&vdd_1v8>;
+		vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+			status = "okay";
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <0>;
+			status = "disabled";
+		};
+
+		pci@3,0 {
+			nvidia,num-lanes = <1>;
+			status = "disabled";
+		};
+	};
+
+	host1x@13e00000 {
+		status = "okay";
+
+		dpaux@15040000 {
+			status = "okay";
+		};
+
+		display-hub@15200000 {
+			status = "okay";
+		};
+
+		dsi@15300000 {
+			status = "disabled";
+		};
+
+		/* DP on E3320 */
+		sor@15540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+
+			nvidia,dpaux = <&dpaux>;
+		};
+
+		sor@15580000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1)
+						 GPIO_ACTIVE_LOW>;
+		};
+
+		dpaux@155c0000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	vdd_sd: regulator-vdd-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "SD_CARD_SW_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb0: regulator-vdd-usb0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_USB0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb1: regulator-vdd-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_USB1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* FE */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* Router */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>,
+		       <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_i2s6_port>,
+		       <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic3_port>,
+		       <&xbar_dspk1_port>, <&xbar_dspk2_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>,
+		       <&mixer_out3_port>, <&mixer_out4_port>,
+		       <&mixer_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* I/O */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
+		       <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>,
+		       <&dmic3_port>, <&dspk1_port>, <&dspk2_port>;
+
+		label = "NVIDIA Jetson TX2 APE";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
new file mode 100644
index 0000000000..e2d6857a37
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra186.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	model = "NVIDIA Jetson TX2";
+	compatible = "nvidia,p3310", "nvidia,tegra186";
+
+	aliases {
+		ethernet0 = "/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/i2c@3160000";
+		i2c2 = "/i2c@c240000";
+		i2c3 = "/i2c@3180000";
+		i2c4 = "/i2c@3190000";
+		i2c5 = "/i2c@31c0000";
+		i2c6 = "/i2c@c250000";
+		i2c7 = "/i2c@31e0000";
+		mmc0 = "/mmc@3460000";
+		mmc1 = "/mmc@3400000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		bootargs = "earlycon console=ttyS0,115200n8 fw_devlink=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	ethernet@2490000 {
+		status = "okay";
+
+		phy-reset-gpios = <&gpio TEGRA186_MAIN_GPIO(M, 4)
+					 GPIO_ACTIVE_LOW>;
+		phy-handle = <&phy>;
+		phy-mode = "rgmii";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0x0>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA186_MAIN_GPIO(M, 5)
+					      IRQ_TYPE_LEVEL_LOW>;
+
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	memory-controller@2c00000 {
+		status = "okay";
+	};
+
+	serial@3100000 {
+		status = "okay";
+	};
+
+	i2c@3160000 {
+		status = "okay";
+
+		power-monitor@40 {
+			compatible = "ti,ina3221";
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_SYS_GPU";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_SYS_SOC";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_3V8_WIFI";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+
+		power-monitor@41 {
+			compatible = "ti,ina3221";
+			reg = <0x41>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_IN";
+				shunt-resistor-micro-ohms = <5000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_SYS_CPU";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_5V0_DDR";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+	};
+
+	i2c@3180000 {
+		status = "okay";
+	};
+
+	ddc: i2c@3190000 {
+		status = "okay";
+	};
+
+	i2c@31c0000 {
+		status = "okay";
+	};
+
+	i2c@31e0000 {
+		status = "okay";
+	};
+
+	/* SDMMC1 (SD/MMC) */
+	mmc@3400000 {
+		cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* SDMMC3 (SDIO) */
+	mmc@3440000 {
+		status = "okay";
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* SDMMC4 (eMMC) */
+	mmc@3460000 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+
+		vqmmc-supply = <&vdd_1v8_ap>;
+		vmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	hsp@3c00000 {
+		status = "okay";
+	};
+
+	i2c@c240000 {
+		status = "okay";
+	};
+
+	i2c@c250000 {
+		status = "okay";
+
+		/* module ID EEPROM */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+
+			label = "module";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	rtc@c2a0000 {
+		status = "okay";
+	};
+
+	pmc@c360000 {
+		nvidia,invert-interrupt;
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max77620";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max77620_default>;
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				max77620_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_1v8>;
+					in-ldo7-8-supply = <&avdd_dsi_csi>;
+
+					sd0 {
+						regulator-name = "VDD_DDR_1V1_PMIC";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					avdd_dsi_csi: sd1 {
+						regulator-name = "AVDD_DSI_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					vdd_1v8: sd2 {
+						regulator-name = "VDD_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					vdd_3v3_sys: sd3 {
+						regulator-name = "VDD_3V3_SYS";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_1v8_pll: ldo0 {
+						regulator-name = "VDD_1V8_AP_PLL";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_3V3_AOHV";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vddio_sdmmc1: ldo3 {
+						regulator-name = "VDDIO_SDMMC1_AP";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo4 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+					};
+
+					vddio_sdmmc3: ldo5 {
+						regulator-name = "VDDIO_SDMMC3_AP";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					vdd_hdmi_1v05: ldo7 {
+						regulator-name = "VDD_HDMI_1V05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					vdd_pex: ldo8 {
+						regulator-name = "VDD_PEX_1V05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		cpu@4 {
+			enable-method = "psci";
+		};
+
+		cpu@5 {
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	gnd: regulator-gnd {
+		compatible = "regulator-fixed";
+		regulator-name = "GND";
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8_ap: regulator-vdd-1v8-ap {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AP";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
new file mode 100644
index 0000000000..26f7165193
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/mfd/max77620.h>
+
+#include "tegra186.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX2 NX Developer Kit";
+	compatible = "nvidia,p3509-0000+p3636-0001", "nvidia,tegra186";
+
+	aliases {
+		ethernet0 = "/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/i2c@3160000";
+		i2c2 = "/i2c@c240000";
+		i2c3 = "/i2c@3180000";
+		i2c4 = "/i2c@3190000";
+		i2c5 = "/i2c@31c0000";
+		i2c6 = "/i2c@c250000";
+		i2c7 = "/i2c@31e0000";
+		mmc0 = "/mmc@3460000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		bootargs = "earlycon console=ttyS0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x70000000>;
+	};
+
+	ethernet@2490000 {
+		status = "okay";
+
+		phy-reset-gpios = <&gpio_aon TEGRA186_AON_GPIO(AA, 6) GPIO_ACTIVE_LOW>;
+		phy-handle = <&phy>;
+		phy-mode = "rgmii-id";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0x0>;
+				interrupt-parent = <&gpio_aon>;
+				interrupts = <TEGRA186_AON_GPIO(AA, 7) IRQ_TYPE_LEVEL_LOW>;
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	aconnect@2900000 {
+		status = "okay";
+
+		ahub@2900800 {
+			status = "okay";
+
+			i2s@2901000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s1_ep>;
+						};
+					};
+
+					i2s1_port: port@1 {
+						reg = <1>;
+
+						i2s1_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s3_ep>;
+						};
+					};
+
+					i2s3_port: port@1 {
+						reg = <1>;
+
+						i2s3_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			admaif@290f000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					admaif0_port: port@0 {
+						reg = <0x0>;
+
+						admaif0_ep: endpoint {
+							remote-endpoint = <&xbar_admaif0_ep>;
+						};
+					};
+
+					admaif1_port: port@1 {
+						reg = <0x1>;
+
+						admaif1_ep: endpoint {
+							remote-endpoint = <&xbar_admaif1_ep>;
+						};
+					};
+
+					admaif2_port: port@2 {
+						reg = <0x2>;
+
+						admaif2_ep: endpoint {
+							remote-endpoint = <&xbar_admaif2_ep>;
+						};
+					};
+
+					admaif3_port: port@3 {
+						reg = <0x3>;
+
+						admaif3_ep: endpoint {
+							remote-endpoint = <&xbar_admaif3_ep>;
+						};
+					};
+
+					admaif4_port: port@4 {
+						reg = <0x4>;
+
+						admaif4_ep: endpoint {
+							remote-endpoint = <&xbar_admaif4_ep>;
+						};
+					};
+
+					admaif5_port: port@5 {
+						reg = <0x5>;
+
+						admaif5_ep: endpoint {
+							remote-endpoint = <&xbar_admaif5_ep>;
+						};
+					};
+
+					admaif6_port: port@6 {
+						reg = <0x6>;
+
+						admaif6_ep: endpoint {
+							remote-endpoint = <&xbar_admaif6_ep>;
+						};
+					};
+
+					admaif7_port: port@7 {
+						reg = <0x7>;
+
+						admaif7_ep: endpoint {
+							remote-endpoint = <&xbar_admaif7_ep>;
+						};
+					};
+
+					admaif8_port: port@8 {
+						reg = <0x8>;
+
+						admaif8_ep: endpoint {
+							remote-endpoint = <&xbar_admaif8_ep>;
+						};
+					};
+
+					admaif9_port: port@9 {
+						reg = <0x9>;
+
+						admaif9_ep: endpoint {
+							remote-endpoint = <&xbar_admaif9_ep>;
+						};
+					};
+
+					admaif10_port: port@a {
+						reg = <0xa>;
+
+						admaif10_ep: endpoint {
+							remote-endpoint = <&xbar_admaif10_ep>;
+						};
+					};
+
+					admaif11_port: port@b {
+						reg = <0xb>;
+
+						admaif11_ep: endpoint {
+							remote-endpoint = <&xbar_admaif11_ep>;
+						};
+					};
+
+					admaif12_port: port@c {
+						reg = <0xc>;
+
+						admaif12_ep: endpoint {
+							remote-endpoint = <&xbar_admaif12_ep>;
+						};
+					};
+
+					admaif13_port: port@d {
+						reg = <0xd>;
+
+						admaif13_ep: endpoint {
+							remote-endpoint = <&xbar_admaif13_ep>;
+						};
+					};
+
+					admaif14_port: port@e {
+						reg = <0xe>;
+
+						admaif14_ep: endpoint {
+							remote-endpoint = <&xbar_admaif14_ep>;
+						};
+					};
+
+					admaif15_port: port@f {
+						reg = <0xf>;
+
+						admaif15_ep: endpoint {
+							remote-endpoint = <&xbar_admaif15_ep>;
+						};
+					};
+
+					admaif16_port: port@10 {
+						reg = <0x10>;
+
+						admaif16_ep: endpoint {
+							remote-endpoint = <&xbar_admaif16_ep>;
+						};
+					};
+
+					admaif17_port: port@11 {
+						reg = <0x11>;
+
+						admaif17_ep: endpoint {
+							remote-endpoint = <&xbar_admaif17_ep>;
+						};
+					};
+
+					admaif18_port: port@12 {
+						reg = <0x12>;
+
+						admaif18_ep: endpoint {
+							remote-endpoint = <&xbar_admaif18_ep>;
+						};
+					};
+
+					admaif19_port: port@13 {
+						reg = <0x13>;
+
+						admaif19_ep: endpoint {
+							remote-endpoint = <&xbar_admaif19_ep>;
+						};
+					};
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					xbar_admaif0_ep: endpoint {
+						remote-endpoint = <&admaif0_ep>;
+					};
+				};
+
+				port@1 {
+					reg = <0x1>;
+
+					xbar_admaif1_ep: endpoint {
+						remote-endpoint = <&admaif1_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <0x2>;
+
+					xbar_admaif2_ep: endpoint {
+						remote-endpoint = <&admaif2_ep>;
+					};
+				};
+
+				port@3 {
+					reg = <0x3>;
+
+					xbar_admaif3_ep: endpoint {
+						remote-endpoint = <&admaif3_ep>;
+					};
+				};
+
+				port@4 {
+					reg = <0x4>;
+
+					xbar_admaif4_ep: endpoint {
+						remote-endpoint = <&admaif4_ep>;
+					};
+				};
+
+				port@5 {
+					reg = <0x5>;
+
+					xbar_admaif5_ep: endpoint {
+						remote-endpoint = <&admaif5_ep>;
+					};
+				};
+
+				port@6 {
+					reg = <0x6>;
+
+					xbar_admaif6_ep: endpoint {
+						remote-endpoint = <&admaif6_ep>;
+					};
+				};
+
+				port@7 {
+					reg = <0x7>;
+
+					xbar_admaif7_ep: endpoint {
+						remote-endpoint = <&admaif7_ep>;
+					};
+				};
+
+				port@8 {
+					reg = <0x8>;
+
+					xbar_admaif8_ep: endpoint {
+						remote-endpoint = <&admaif8_ep>;
+					};
+				};
+
+				port@9 {
+					reg = <0x9>;
+
+					xbar_admaif9_ep: endpoint {
+						remote-endpoint = <&admaif9_ep>;
+					};
+				};
+
+				port@a {
+					reg = <0xa>;
+
+					xbar_admaif10_ep: endpoint {
+						remote-endpoint = <&admaif10_ep>;
+					};
+				};
+
+				port@b {
+					reg = <0xb>;
+
+					xbar_admaif11_ep: endpoint {
+						remote-endpoint = <&admaif11_ep>;
+					};
+				};
+
+				port@c {
+					reg = <0xc>;
+
+					xbar_admaif12_ep: endpoint {
+						remote-endpoint = <&admaif12_ep>;
+					};
+				};
+
+				port@d {
+					reg = <0xd>;
+
+					xbar_admaif13_ep: endpoint {
+						remote-endpoint = <&admaif13_ep>;
+					};
+				};
+
+				port@e {
+					reg = <0xe>;
+
+					xbar_admaif14_ep: endpoint {
+						remote-endpoint = <&admaif14_ep>;
+					};
+				};
+
+				port@f {
+					reg = <0xf>;
+
+					xbar_admaif15_ep: endpoint {
+						remote-endpoint = <&admaif15_ep>;
+					};
+				};
+
+				port@10 {
+					reg = <0x10>;
+
+					xbar_admaif16_ep: endpoint {
+						remote-endpoint = <&admaif16_ep>;
+					};
+				};
+
+				port@11 {
+					reg = <0x11>;
+
+					xbar_admaif17_ep: endpoint {
+						remote-endpoint = <&admaif17_ep>;
+					};
+				};
+
+				port@12 {
+					reg = <0x12>;
+
+					xbar_admaif18_ep: endpoint {
+						remote-endpoint = <&admaif18_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_admaif19_ep: endpoint {
+						remote-endpoint = <&admaif19_ep>;
+					};
+				};
+
+				xbar_i2s1_port: port@14 {
+					reg = <0x14>;
+
+					xbar_i2s1_ep: endpoint {
+						remote-endpoint = <&i2s1_cif_ep>;
+					};
+				};
+
+				xbar_i2s3_port: port@16 {
+					reg = <0x16>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@1b {
+					reg = <0x1b>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@2930000 {
+			status = "okay";
+		};
+
+		interrupt-controller@2a40000 {
+			status = "okay";
+		};
+	};
+
+	memory-controller@2c00000 {
+		status = "okay";
+	};
+
+	timer@3010000 {
+		status = "okay";
+	};
+
+	serial@3100000 {
+		status = "okay";
+	};
+
+	i2c@3160000 {
+		status = "okay";
+	};
+
+	i2c@3180000 {
+		status = "okay";
+
+		power-monitor@40 {
+			compatible = "ti,ina3221";
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0>;
+				label = "VDD_IN";
+				shunt-resistor-micro-ohms = <5>;
+			};
+
+			input@1 {
+				reg = <1>;
+				label = "VDD_CPU_GPU";
+				shunt-resistor-micro-ohms = <5>;
+			};
+
+			input@2 {
+				reg = <2>;
+				label = "VDD_SOC";
+				shunt-resistor-micro-ohms = <5>;
+			};
+		};
+	};
+
+	ddc: i2c@3190000 {
+		status = "okay";
+	};
+
+	i2c@31c0000 {
+		status = "okay";
+	};
+
+	i2c@31e0000 {
+		status = "okay";
+	};
+
+	/* SDMMC4 (eMMC) */
+	mmc@3460000 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+
+		vqmmc-supply = <&vdd_1v8_ap>;
+		vmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	hda@3510000 {
+		nvidia,model = "NVIDIA Jetson TX2 NX HDA";
+		status = "okay";
+	};
+
+	padctl@3520000 {
+		status = "okay";
+
+		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
+		avdd-usb-supply = <&vdd_3v3_sys>;
+		vclamp-usb-supply = <&vdd_1v8>;
+		vddio-hsic-supply = <&gnd>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					micro_b: usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			usb3 {
+				status = "okay";
+
+				lanes {
+					usb3-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+				vbus-supply = <&vdd_5v0_sys>;
+				usb-role-switch;
+
+				connector {
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpios = <&gpio
+						      TEGRA186_MAIN_GPIO(L, 4)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_5v0_sys>;
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_5v0_sys>;
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <1>;
+				vbus-supply = <&vdd_5v0_sys>;
+				status = "okay";
+			};
+		};
+	};
+
+	usb@3530000 {
+		status = "okay";
+
+		phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-1";
+	};
+
+	usb@3550000 {
+		status = "okay";
+
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+	};
+
+	hsp@3c00000 {
+		status = "okay";
+	};
+
+	i2c@c240000 {
+		status = "okay";
+	};
+
+	i2c@c250000 {
+		status = "okay";
+
+		/* module ID EEPROM */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+
+			label = "module";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+
+		/* carrier board ID EEPROM */
+		eeprom@57 {
+			compatible = "atmel,24c02";
+			reg = <0x57>;
+
+			label = "system";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	rtc@c2a0000 {
+		status = "okay";
+	};
+
+	pwm@c340000 {
+		status = "okay";
+	};
+
+	pmc@c360000 {
+		nvidia,invert-interrupt;
+	};
+
+	pcie@10003000 {
+		status = "okay";
+
+		dvdd-pex-supply = <&vdd_pex>;
+		hvdd-pex-pll-supply = <&vdd_1v8>;
+		hvdd-pex-supply = <&vdd_1v8>;
+		vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <2>;
+			status = "okay";
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+			status = "disabled";
+		};
+
+		pci@3,0 {
+			nvidia,num-lanes = <1>;
+			status = "okay";
+		};
+	};
+
+	host1x@13e00000 {
+		status = "okay";
+
+		dpaux@15040000 {
+			status = "okay";
+		};
+
+		display-hub@15200000 {
+			status = "okay";
+		};
+
+		dsi@15300000 {
+			status = "disabled";
+		};
+
+		/* DP */
+		sor@15540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+
+			nvidia,dpaux = <&dpaux>;
+		};
+
+		/* HDMI */
+		sor@15580000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1)
+						 GPIO_ACTIVE_LOW>;
+		};
+
+		dpaux@155c0000 {
+			status = "okay";
+		};
+	};
+
+	gpu@17000000 {
+		status = "okay";
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max77620";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max77620_default>;
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				max77620_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_1v8>;
+					in-ldo7-8-supply = <&avdd_dsi_csi>;
+
+					sd0 {
+						regulator-name = "VDD_DDR_1V1_PMIC";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					avdd_dsi_csi: sd1 {
+						regulator-name = "AVDD_DSI_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					vdd_1v8: sd2 {
+						regulator-name = "VDD_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					vdd_3v3_sys: sd3 {
+						regulator-name = "VDD_3V3_SYS";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_1v8_pll: ldo0 {
+						regulator-name = "VDD_1V8_AP_PLL";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_3V3_AOHV";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vddio_sdmmc1: ldo3 {
+						regulator-name = "VDDIO_SDMMC1_AP";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo4 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+					};
+
+					vddio_sdmmc3: ldo5 {
+						regulator-name = "VDDIO_SDMMC3_AP";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					vdd_hdmi_1v05: ldo7 {
+						regulator-name = "VDD_HDMI_1V05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					vdd_pex: ldo8 {
+						regulator-name = "VDD_PEX_1V05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		cpu@4 {
+			enable-method = "psci";
+		};
+
+		cpu@5 {
+			enable-method = "psci";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	gnd: regulator-gnd {
+		compatible = "regulator-fixed";
+		regulator-name = "GND";
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8_ap: regulator-vdd-1v8-ap {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AP";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_1v8>;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* FE */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* Router */
+		       <&xbar_i2s1_port>, <&xbar_i2s3_port>,
+		       <&xbar_dmic1_port>, <&xbar_dmic2_port>,
+		       /* I/O */
+		       <&i2s1_port>, <&i2s3_port>,
+		       <&dmic1_port>, <&dmic2_port>;
+
+		label = "NVIDIA Jetson TX2 NX APE";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <79000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <62000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <45000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
new file mode 100644
index 0000000000..2b3bb5d0af
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -0,0 +1,2183 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra186-clock.h>
+#include <dt-bindings/gpio/tegra186-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/memory/tegra186-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+#include <dt-bindings/power/tegra186-powergate.h>
+#include <dt-bindings/reset/tegra186-reset.h>
+#include <dt-bindings/thermal/tegra186-bpmp-thermal.h>
+
+/ {
+	compatible = "nvidia,tegra186";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	misc@100000 {
+		compatible = "nvidia,tegra186-misc";
+		reg = <0x0 0x00100000 0x0 0xf000>,
+		      <0x0 0x0010f000 0x0 0x1000>;
+	};
+
+	gpio: gpio@2200000 {
+		compatible = "nvidia,tegra186-gpio";
+		reg-names = "security", "gpio";
+		reg = <0x0 0x2200000 0x0 0x10000>,
+		      <0x0 0x2210000 0x0 0x10000>;
+		interrupts = <GIC_SPI  47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  59 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	ethernet@2490000 {
+		compatible = "nvidia,tegra186-eqos",
+			     "snps,dwc-qos-ethernet-4.10";
+		reg = <0x0 0x02490000 0x0 0x10000>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* common */
+			     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, /* power */
+			     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, /* rx0 */
+			     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, /* tx0 */
+			     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* rx1 */
+			     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, /* tx1 */
+			     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* rx2 */
+			     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* tx2 */
+			     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* rx3 */
+			     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; /* tx3 */
+		clocks = <&bpmp TEGRA186_CLK_AXI_CBB>,
+			 <&bpmp TEGRA186_CLK_EQOS_AXI>,
+			 <&bpmp TEGRA186_CLK_EQOS_RX>,
+			 <&bpmp TEGRA186_CLK_EQOS_TX>,
+			 <&bpmp TEGRA186_CLK_EQOS_PTP_REF>;
+		clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
+		resets = <&bpmp TEGRA186_RESET_EQOS>;
+		reset-names = "eqos";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_EQOSR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_EQOSW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_EQOS>;
+		status = "disabled";
+
+		snps,write-requests = <1>;
+		snps,read-requests = <3>;
+		snps,burst-map = <0x7>;
+		snps,txpbl = <32>;
+		snps,rxpbl = <8>;
+	};
+
+	gpcdma: dma-controller@2600000 {
+		compatible = "nvidia,tegra186-gpcdma";
+		reg = <0x0 0x2600000 0x0 0x210000>;
+		resets = <&bpmp TEGRA186_RESET_GPCDMA>;
+		reset-names = "gpcdma";
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
+		dma-coherent;
+		dma-channel-mask = <0xfffffffe>;
+		status = "okay";
+	};
+
+	aconnect@2900000 {
+		compatible = "nvidia,tegra186-aconnect",
+			     "nvidia,tegra210-aconnect";
+		clocks = <&bpmp TEGRA186_CLK_APE>,
+			 <&bpmp TEGRA186_CLK_APB2APE>;
+		clock-names = "ape", "apb2ape";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x02900000 0x0 0x02900000 0x200000>;
+		status = "disabled";
+
+		tegra_ahub: ahub@2900800 {
+			compatible = "nvidia,tegra186-ahub";
+			reg = <0x02900800 0x800>;
+			clocks = <&bpmp TEGRA186_CLK_AHUB>;
+			clock-names = "ahub";
+			assigned-clocks = <&bpmp TEGRA186_CLK_AHUB>;
+			assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+			assigned-clock-rates = <81600000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x02900800 0x02900800 0x11800>;
+			status = "disabled";
+
+			tegra_i2s1: i2s@2901000 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901000 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S1>,
+					 <&bpmp TEGRA186_CLK_I2S1_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S1>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S1";
+				status = "disabled";
+			};
+
+			tegra_i2s2: i2s@2901100 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901100 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S2>,
+					 <&bpmp TEGRA186_CLK_I2S2_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S2>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S2";
+				status = "disabled";
+			};
+
+			tegra_i2s3: i2s@2901200 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901200 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S3>,
+					 <&bpmp TEGRA186_CLK_I2S3_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S3>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S3";
+				status = "disabled";
+			};
+
+			tegra_i2s4: i2s@2901300 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901300 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S4>,
+					 <&bpmp TEGRA186_CLK_I2S4_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S4>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S4";
+				status = "disabled";
+			};
+
+			tegra_i2s5: i2s@2901400 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901400 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S5>,
+					 <&bpmp TEGRA186_CLK_I2S5_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S5>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S5";
+				status = "disabled";
+			};
+
+			tegra_i2s6: i2s@2901500 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901500 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S6>,
+					 <&bpmp TEGRA186_CLK_I2S6_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S6>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S6";
+				status = "disabled";
+			};
+
+			tegra_sfc1: sfc@2902000 {
+				compatible = "nvidia,tegra186-sfc",
+					     "nvidia,tegra210-sfc";
+				reg = <0x2902000 0x200>;
+				sound-name-prefix = "SFC1";
+				status = "disabled";
+			};
+
+			tegra_sfc2: sfc@2902200 {
+				compatible = "nvidia,tegra186-sfc",
+					     "nvidia,tegra210-sfc";
+				reg = <0x2902200 0x200>;
+				sound-name-prefix = "SFC2";
+				status = "disabled";
+			};
+
+			tegra_sfc3: sfc@2902400 {
+				compatible = "nvidia,tegra186-sfc",
+					     "nvidia,tegra210-sfc";
+				reg = <0x2902400 0x200>;
+				sound-name-prefix = "SFC3";
+				status = "disabled";
+			};
+
+			tegra_sfc4: sfc@2902600 {
+				compatible = "nvidia,tegra186-sfc",
+					     "nvidia,tegra210-sfc";
+				reg = <0x2902600 0x200>;
+				sound-name-prefix = "SFC4";
+				status = "disabled";
+			};
+
+			tegra_amx1: amx@2903000 {
+				compatible = "nvidia,tegra186-amx",
+					     "nvidia,tegra210-amx";
+				reg = <0x2903000 0x100>;
+				sound-name-prefix = "AMX1";
+				status = "disabled";
+			};
+
+			tegra_amx2: amx@2903100 {
+				compatible = "nvidia,tegra186-amx",
+					     "nvidia,tegra210-amx";
+				reg = <0x2903100 0x100>;
+				sound-name-prefix = "AMX2";
+				status = "disabled";
+			};
+
+			tegra_amx3: amx@2903200 {
+				compatible = "nvidia,tegra186-amx",
+					     "nvidia,tegra210-amx";
+				reg = <0x2903200 0x100>;
+				sound-name-prefix = "AMX3";
+				status = "disabled";
+			};
+
+			tegra_amx4: amx@2903300 {
+				compatible = "nvidia,tegra186-amx",
+					     "nvidia,tegra210-amx";
+				reg = <0x2903300 0x100>;
+				sound-name-prefix = "AMX4";
+				status = "disabled";
+			};
+
+			tegra_adx1: adx@2903800 {
+				compatible = "nvidia,tegra186-adx",
+					     "nvidia,tegra210-adx";
+				reg = <0x2903800 0x100>;
+				sound-name-prefix = "ADX1";
+				status = "disabled";
+			};
+
+			tegra_adx2: adx@2903900 {
+				compatible = "nvidia,tegra186-adx",
+					     "nvidia,tegra210-adx";
+				reg = <0x2903900 0x100>;
+				sound-name-prefix = "ADX2";
+				status = "disabled";
+			};
+
+			tegra_adx3: adx@2903a00 {
+				compatible = "nvidia,tegra186-adx",
+					     "nvidia,tegra210-adx";
+				reg = <0x2903a00 0x100>;
+				sound-name-prefix = "ADX3";
+				status = "disabled";
+			};
+
+			tegra_adx4: adx@2903b00 {
+				compatible = "nvidia,tegra186-adx",
+					     "nvidia,tegra210-adx";
+				reg = <0x2903b00 0x100>;
+				sound-name-prefix = "ADX4";
+				status = "disabled";
+			};
+
+			tegra_dmic1: dmic@2904000 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x2904000 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC1>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC1";
+				status = "disabled";
+			};
+
+			tegra_dmic2: dmic@2904100 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x2904100 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC2>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC2";
+				status = "disabled";
+			};
+
+			tegra_dmic3: dmic@2904200 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x2904200 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC3>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC3";
+				status = "disabled";
+			};
+
+			tegra_dmic4: dmic@2904300 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x2904300 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC4>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC4";
+				status = "disabled";
+			};
+
+			tegra_dspk1: dspk@2905000 {
+				compatible = "nvidia,tegra186-dspk";
+				reg = <0x2905000 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+				clock-names = "dspk";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <12288000>;
+				sound-name-prefix = "DSPK1";
+				status = "disabled";
+			};
+
+			tegra_dspk2: dspk@2905100 {
+				compatible = "nvidia,tegra186-dspk";
+				reg = <0x2905100 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DSPK2>;
+				clock-names = "dspk";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <12288000>;
+				sound-name-prefix = "DSPK2";
+				status = "disabled";
+			};
+
+			tegra_ope1: processing-engine@2908000 {
+				compatible = "nvidia,tegra186-ope",
+					     "nvidia,tegra210-ope";
+				reg = <0x2908000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				sound-name-prefix = "OPE1";
+				status = "disabled";
+
+				equalizer@2908100 {
+					compatible = "nvidia,tegra186-peq",
+						     "nvidia,tegra210-peq";
+					reg = <0x2908100 0x100>;
+				};
+
+				dynamic-range-compressor@2908200 {
+					compatible = "nvidia,tegra186-mbdrc",
+						     "nvidia,tegra210-mbdrc";
+					reg = <0x2908200 0x200>;
+				};
+			};
+
+			tegra_mvc1: mvc@290a000 {
+				compatible = "nvidia,tegra186-mvc",
+					     "nvidia,tegra210-mvc";
+				reg = <0x290a000 0x200>;
+				sound-name-prefix = "MVC1";
+				status = "disabled";
+			};
+
+			tegra_mvc2: mvc@290a200 {
+				compatible = "nvidia,tegra186-mvc",
+					     "nvidia,tegra210-mvc";
+				reg = <0x290a200 0x200>;
+				sound-name-prefix = "MVC2";
+				status = "disabled";
+			};
+
+			tegra_amixer: amixer@290bb00 {
+				compatible = "nvidia,tegra186-amixer",
+					     "nvidia,tegra210-amixer";
+				reg = <0x290bb00 0x800>;
+				sound-name-prefix = "MIXER1";
+				status = "disabled";
+			};
+
+			tegra_admaif: admaif@290f000 {
+				compatible = "nvidia,tegra186-admaif";
+				reg = <0x0290f000 0x1000>;
+				dmas = <&adma 1>, <&adma 1>,
+				       <&adma 2>, <&adma 2>,
+				       <&adma 3>, <&adma 3>,
+				       <&adma 4>, <&adma 4>,
+				       <&adma 5>, <&adma 5>,
+				       <&adma 6>, <&adma 6>,
+				       <&adma 7>, <&adma 7>,
+				       <&adma 8>, <&adma 8>,
+				       <&adma 9>, <&adma 9>,
+				       <&adma 10>, <&adma 10>,
+				       <&adma 11>, <&adma 11>,
+				       <&adma 12>, <&adma 12>,
+				       <&adma 13>, <&adma 13>,
+				       <&adma 14>, <&adma 14>,
+				       <&adma 15>, <&adma 15>,
+				       <&adma 16>, <&adma 16>,
+				       <&adma 17>, <&adma 17>,
+				       <&adma 18>, <&adma 18>,
+				       <&adma 19>, <&adma 19>,
+				       <&adma 20>, <&adma 20>;
+				dma-names = "rx1", "tx1",
+					    "rx2", "tx2",
+					    "rx3", "tx3",
+					    "rx4", "tx4",
+					    "rx5", "tx5",
+					    "rx6", "tx6",
+					    "rx7", "tx7",
+					    "rx8", "tx8",
+					    "rx9", "tx9",
+					    "rx10", "tx10",
+					    "rx11", "tx11",
+					    "rx12", "tx12",
+					    "rx13", "tx13",
+					    "rx14", "tx14",
+					    "rx15", "tx15",
+					    "rx16", "tx16",
+					    "rx17", "tx17",
+					    "rx18", "tx18",
+					    "rx19", "tx19",
+					    "rx20", "tx20";
+				status = "disabled";
+			};
+
+			tegra_asrc: asrc@2910000 {
+				compatible = "nvidia,tegra186-asrc";
+				reg = <0x2910000 0x2000>;
+				sound-name-prefix = "ASRC1";
+				status = "disabled";
+			};
+		};
+
+		adma: dma-controller@2930000 {
+			compatible = "nvidia,tegra186-adma";
+			reg = <0x02930000 0x20000>;
+			interrupt-parent = <&agic>;
+			interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&bpmp TEGRA186_CLK_AHUB>;
+			clock-names = "d_audio";
+			status = "disabled";
+		};
+
+		agic: interrupt-controller@2a40000 {
+			compatible = "nvidia,tegra186-agic",
+				     "nvidia,tegra210-agic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x02a41000 0x1000>,
+			      <0x02a42000 0x2000>;
+			interrupts = <GIC_SPI 145
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&bpmp TEGRA186_CLK_APE>;
+			clock-names = "clk";
+			status = "disabled";
+		};
+	};
+
+	mc: memory-controller@2c00000 {
+		compatible = "nvidia,tegra186-mc";
+		reg = <0x0 0x02c00000 0x0 0x10000>,    /* MC-SID */
+		      <0x0 0x02c10000 0x0 0x10000>,    /* Broadcast channel */
+		      <0x0 0x02c20000 0x0 0x10000>,    /* MC0 */
+		      <0x0 0x02c30000 0x0 0x10000>,    /* MC1 */
+		      <0x0 0x02c40000 0x0 0x10000>,    /* MC2 */
+		      <0x0 0x02c50000 0x0 0x10000>;    /* MC3 */
+		reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		#interconnect-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
+
+		/*
+		 * Memory clients have access to all 40 bits that the memory
+		 * controller can address.
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		emc: external-memory-controller@2c60000 {
+			compatible = "nvidia,tegra186-emc";
+			reg = <0x0 0x02c60000 0x0 0x50000>;
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_EMC>;
+			clock-names = "emc";
+
+			#interconnect-cells = <0>;
+
+			nvidia,bpmp = <&bpmp>;
+		};
+	};
+
+	timer@3010000 {
+		compatible = "nvidia,tegra186-timer";
+		reg = <0x0 0x03010000 0x0 0x000e0000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		status = "okay";
+	};
+
+	uarta: serial@3100000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03100000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTA>;
+		resets = <&bpmp TEGRA186_RESET_UARTA>;
+		status = "disabled";
+	};
+
+	uartb: serial@3110000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03110000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTB>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTB>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartd: serial@3130000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03130000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTD>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTD>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uarte: serial@3140000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03140000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTE>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTE>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartf: serial@3150000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03150000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTF>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTF>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	gen1_i2c: i2c@3160000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x03160000 0x0 0x10000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C1>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 21>, <&gpcdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	cam_i2c: i2c@3180000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x03180000 0x0 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C3>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 23>, <&gpcdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	/* shares pads with dpaux1 */
+	dp_aux_ch1_i2c: i2c@3190000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x03190000 0x0 0x10000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C4>;
+		reset-names = "i2c";
+		pinctrl-names = "default", "idle";
+		pinctrl-0 = <&state_dpaux1_i2c>;
+		pinctrl-1 = <&state_dpaux1_off>;
+		dmas = <&gpcdma 26>, <&gpcdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	/* controlled by BPMP, should not be enabled */
+	pwr_i2c: i2c@31a0000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x031a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C5>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	/* shares pads with dpaux0 */
+	dp_aux_ch0_i2c: i2c@31b0000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x031b0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C6>;
+		reset-names = "i2c";
+		pinctrl-names = "default", "idle";
+		pinctrl-0 = <&state_dpaux_i2c>;
+		pinctrl-1 = <&state_dpaux_off>;
+		dmas = <&gpcdma 30>, <&gpcdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	gen7_i2c: i2c@31c0000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x031c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C7>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C7>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 27>, <&gpcdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	gen9_i2c: i2c@31e0000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x031e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C9>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C9>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 31>, <&gpcdma 31>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm1: pwm@3280000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x3280000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM1>;
+		resets = <&bpmp TEGRA186_RESET_PWM1>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm2: pwm@3290000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x3290000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM2>;
+		resets = <&bpmp TEGRA186_RESET_PWM2>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm3: pwm@32a0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32a0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM3>;
+		resets = <&bpmp TEGRA186_RESET_PWM3>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm5: pwm@32c0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32c0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM5>;
+		resets = <&bpmp TEGRA186_RESET_PWM5>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm6: pwm@32d0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32d0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM6>;
+		resets = <&bpmp TEGRA186_RESET_PWM6>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm7: pwm@32e0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32e0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM7>;
+		resets = <&bpmp TEGRA186_RESET_PWM7>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm8: pwm@32f0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32f0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM8>;
+		resets = <&bpmp TEGRA186_RESET_PWM8>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	sdmmc1: mmc@3400000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03400000 0x0 0x10000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&bpmp TEGRA186_RESET_SDMMC1>;
+		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SDMMC1>;
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+		pinctrl-0 = <&sdmmc1_3v3>;
+		pinctrl-1 = <&sdmmc1_1v8>;
+		nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+		nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>;
+		nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0xb>;
+		assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+				  <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+		status = "disabled";
+	};
+
+	sdmmc2: mmc@3420000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03420000 0x0 0x10000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_SDMMC2>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&bpmp TEGRA186_RESET_SDMMC2>;
+		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAA &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SDMMC2>;
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+		pinctrl-0 = <&sdmmc2_3v3>;
+		pinctrl-1 = <&sdmmc2_1v8>;
+		nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0xb>;
+		status = "disabled";
+	};
+
+	sdmmc3: mmc@3440000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03440000 0x0 0x10000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_SDMMC3>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&bpmp TEGRA186_RESET_SDMMC3>;
+		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SDMMC3>;
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+		pinctrl-0 = <&sdmmc3_3v3>;
+		pinctrl-1 = <&sdmmc3_1v8>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
+		nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0xb>;
+		status = "disabled";
+	};
+
+	sdmmc4: mmc@3460000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03460000 0x0 0x10000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
+		assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+				  <&bpmp TEGRA186_CLK_PLLC4_VCO>;
+		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
+		resets = <&bpmp TEGRA186_RESET_SDMMC4>;
+		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAB &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAB &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SDMMC4>;
+		nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>;
+		nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
+		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+		nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
+		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
+		nvidia,default-tap = <0x9>;
+		nvidia,default-trim = <0x5>;
+		nvidia,dqs-trim = <63>;
+		mmc-hs400-1_8v;
+		supports-cqe;
+		status = "disabled";
+	};
+
+	sata@3507000 {
+		compatible = "nvidia,tegra186-ahci";
+		reg = <0x0 0x03507000 0x0 0x00002000>, /* AHCI */
+		      <0x0 0x03500000 0x0 0x00007000>, /* SATA */
+		      <0x0 0x03A90000 0x0 0x00010000>; /* SATA AUX */
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_SAX>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SATAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SATAW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SATA>;
+
+		clocks = <&bpmp TEGRA186_CLK_SATA>,
+			 <&bpmp TEGRA186_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
+		assigned-clocks = <&bpmp TEGRA186_CLK_SATA>,
+				  <&bpmp TEGRA186_CLK_SATA_OOB>;
+		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>,
+					 <&bpmp TEGRA186_CLK_PLLP>;
+		assigned-clock-rates = <102000000>,
+				       <204000000>;
+		resets = <&bpmp TEGRA186_RESET_SATA>,
+			<&bpmp TEGRA186_RESET_SATACOLD>;
+		reset-names = "sata", "sata-cold";
+		status = "disabled";
+	};
+
+	hda@3510000 {
+		compatible = "nvidia,tegra186-hda", "nvidia,tegra30-hda";
+		reg = <0x0 0x03510000 0x0 0x10000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_HDA>,
+			 <&bpmp TEGRA186_CLK_HDA2HDMICODEC>,
+			 <&bpmp TEGRA186_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&bpmp TEGRA186_RESET_HDA>,
+			 <&bpmp TEGRA186_RESET_HDA2HDMICODEC>,
+			 <&bpmp TEGRA186_RESET_HDA2CODEC_2X>;
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HDAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_HDAW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_HDA>;
+		status = "disabled";
+	};
+
+	padctl: padctl@3520000 {
+		compatible = "nvidia,tegra186-xusb-padctl";
+		reg = <0x0 0x03520000 0x0 0x1000>,
+		      <0x0 0x03540000 0x0 0x1000>;
+		reg-names = "padctl", "ao";
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+		resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>;
+		reset-names = "padctl";
+
+		status = "disabled";
+
+		pads {
+			usb2 {
+				clocks = <&bpmp TEGRA186_CLK_USB2_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			usb3 {
+				status = "disabled";
+
+				lanes {
+					usb3-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb3-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb3-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+
+			usb3-2 {
+				status = "disabled";
+			};
+		};
+	};
+
+	usb@3530000 {
+		compatible = "nvidia,tegra186-xusb";
+		reg = <0x0 0x03530000 0x0 0x8000>,
+		      <0x0 0x03538000 0x0 0x1000>;
+		reg-names = "hcd", "fpci";
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
+			 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
+			 <&bpmp TEGRA186_CLK_XUSB_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+			 <&bpmp TEGRA186_CLK_CLK_M>,
+			 <&bpmp TEGRA186_CLK_XUSB_FS>,
+			 <&bpmp TEGRA186_CLK_PLLU>,
+			 <&bpmp TEGRA186_CLK_CLK_M>,
+			 <&bpmp TEGRA186_CLK_PLLE>;
+		clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
+				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+		power-domain-names = "xusb_host", "xusb_ss";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		nvidia,xusb-padctl = <&padctl>;
+	};
+
+	usb@3550000 {
+		compatible = "nvidia,tegra186-xudc";
+		reg = <0x0 0x03550000 0x0 0x8000>,
+		      <0x0 0x03558000 0x0 0x1000>;
+		reg-names = "base", "fpci";
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_XUSB_CORE_DEV>,
+			 <&bpmp TEGRA186_CLK_XUSB_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_FS>;
+		clock-names = "dev", "ss", "ss_src", "fs_src";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_DEVR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_XUSB_DEVW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_XUSB_DEV>;
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBB>,
+				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+		power-domain-names = "dev", "ss";
+		nvidia,xusb-padctl = <&padctl>;
+		status = "disabled";
+	};
+
+	fuse@3820000 {
+		compatible = "nvidia,tegra186-efuse";
+		reg = <0x0 0x03820000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_FUSE>;
+		clock-names = "fuse";
+	};
+
+	gic: interrupt-controller@3881000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x03881000 0x0 0x1000>,
+		      <0x0 0x03882000 0x0 0x2000>,
+		      <0x0 0x03884000 0x0 0x2000>,
+		      <0x0 0x03886000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	cec@3960000 {
+		compatible = "nvidia,tegra186-cec";
+		reg = <0x0 0x03960000 0x0 0x10000>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+	};
+
+	hsp_top0: hsp@3c00000 {
+		compatible = "nvidia,tegra186-hsp";
+		reg = <0x0 0x03c00000 0x0 0xa0000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "doorbell";
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	gen2_i2c: i2c@c240000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x0c240000 0x0 0x10000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C2>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 22>, <&gpcdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	gen8_i2c: i2c@c250000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x0c250000 0x0 0x10000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C8>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C8>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 0>, <&gpcdma 0>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@c280000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x0c280000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTC>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTC>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartg: serial@c290000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x0c290000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTG>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTG>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	rtc: rtc@c2a0000 {
+		compatible = "nvidia,tegra186-rtc", "nvidia,tegra20-rtc";
+		reg = <0 0x0c2a0000 0 0x10000>;
+		interrupt-parent = <&pmc>;
+		interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_CLK_32K>;
+		clock-names = "rtc";
+		status = "disabled";
+	};
+
+	gpio_aon: gpio@c2f0000 {
+		compatible = "nvidia,tegra186-gpio-aon";
+		reg-names = "security", "gpio";
+		reg = <0x0 0xc2f0000 0x0 0x1000>,
+		      <0x0 0xc2f1000 0x0 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pwm4: pwm@c340000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0xc340000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM4>;
+		resets = <&bpmp TEGRA186_RESET_PWM4>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pmc: pmc@c360000 {
+		compatible = "nvidia,tegra186-pmc";
+		reg = <0 0x0c360000 0 0x10000>,
+		      <0 0x0c370000 0 0x10000>,
+		      <0 0x0c380000 0 0x10000>,
+		      <0 0x0c390000 0 0x10000>;
+		reg-names = "pmc", "wake", "aotag", "scratch";
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		sdmmc1_1v8: sdmmc1-1v8 {
+			pins = "sdmmc1-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+		};
+
+		sdmmc1_3v3: sdmmc1-3v3 {
+			pins = "sdmmc1-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+		};
+
+		sdmmc2_1v8: sdmmc2-1v8 {
+			pins = "sdmmc2-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+		};
+
+		sdmmc2_3v3: sdmmc2-3v3 {
+			pins = "sdmmc2-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+		};
+
+		sdmmc3_1v8: sdmmc3-1v8 {
+			pins = "sdmmc3-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+		};
+
+		sdmmc3_3v3: sdmmc3-3v3 {
+			pins = "sdmmc3-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+		};
+	};
+
+	ccplex@e000000 {
+		compatible = "nvidia,tegra186-ccplex-cluster";
+		reg = <0x0 0x0e000000 0x0 0x400000>;
+
+		nvidia,bpmp = <&bpmp>;
+	};
+
+	pcie@10003000 {
+		compatible = "nvidia,tegra186-pcie";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
+		device_type = "pci";
+		reg = <0x0 0x10003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x10003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x10000000 0x0 0x10000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x10001000 0x0 0x10001000 0 0x00001000>,/* port 1 configuration space */
+			 <0x02000000 0 0x10004000 0x0 0x10004000 0 0x00001000>, /* port 2 configuration space */
+			 <0x01000000 0 0x0        0x0 0x50000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x50100000 0x0 0x50100000 0 0x07f00000>, /* non-prefetchable memory (127 MiB) */
+			 <0x42000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+
+		clocks = <&bpmp TEGRA186_CLK_PCIE>,
+			 <&bpmp TEGRA186_CLK_AFI>,
+			 <&bpmp TEGRA186_CLK_PLLE>;
+		clock-names = "pex", "afi", "pll_e";
+
+		resets = <&bpmp TEGRA186_RESET_PCIE>,
+			 <&bpmp TEGRA186_RESET_AFI>,
+			 <&bpmp TEGRA186_RESET_PCIEXCLK>;
+		reset-names = "pex", "afi", "pcie_x";
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_AFIR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_AFIW &emc>;
+		interconnect-names = "dma-mem", "write";
+
+		iommus = <&smmu TEGRA186_SID_AFI>;
+		iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>;
+		iommu-map-mask = <0x0>;
+
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	smmu: iommu@12000000 {
+		compatible = "nvidia,tegra186-smmu", "nvidia,smmu-500";
+		reg = <0 0x12000000 0 0x800000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		stream-match-mask = <0x7f80>;
+		#global-interrupts = <1>;
+		#iommu-cells = <1>;
+
+		nvidia,memory-controller = <&mc>;
+	};
+
+	host1x@13e00000 {
+		compatible = "nvidia,tegra186-host1x";
+		reg = <0x0 0x13e00000 0x0 0x10000>,
+		      <0x0 0x13e10000 0x0 0x10000>;
+		reg-names = "hypervisor", "vm";
+		interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&bpmp TEGRA186_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&bpmp TEGRA186_RESET_HOST1X>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>;
+		interconnect-names = "dma-mem";
+
+		iommus = <&smmu TEGRA186_SID_HOST1X>;
+
+		/* Context isolation domains */
+		iommu-map = <0 &smmu TEGRA186_SID_HOST1X_CTX0 1>,
+			    <1 &smmu TEGRA186_SID_HOST1X_CTX1 1>,
+			    <2 &smmu TEGRA186_SID_HOST1X_CTX2 1>,
+			    <3 &smmu TEGRA186_SID_HOST1X_CTX3 1>,
+			    <4 &smmu TEGRA186_SID_HOST1X_CTX4 1>,
+			    <5 &smmu TEGRA186_SID_HOST1X_CTX5 1>,
+			    <6 &smmu TEGRA186_SID_HOST1X_CTX6 1>,
+			    <7 &smmu TEGRA186_SID_HOST1X_CTX7 1>;
+
+		dpaux1: dpaux@15040000 {
+			compatible = "nvidia,tegra186-dpaux";
+			reg = <0x15040000 0x10000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DPAUX1>,
+				 <&bpmp TEGRA186_CLK_PLLDP>;
+			clock-names = "dpaux", "parent";
+			resets = <&bpmp TEGRA186_RESET_DPAUX1>;
+			reset-names = "dpaux";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+			state_dpaux1_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux1_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux1_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		display-hub@15200000 {
+			compatible = "nvidia,tegra186-display";
+			reg = <0x15200000 0x00040000>;
+			resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>;
+			reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+				      "wgrp3", "wgrp4", "wgrp5";
+			clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>,
+				 <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
+				 <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
+			clock-names = "disp", "dsc", "hub";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x15200000 0x15200000 0x40000>;
+
+			display@15200000 {
+				compatible = "nvidia,tegra186-dc";
+				reg = <0x15200000 0x10000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
+				clock-names = "dc";
+				resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>;
+				reset-names = "dc";
+
+				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
+				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+				nvidia,head = <0>;
+			};
+
+			display@15210000 {
+				compatible = "nvidia,tegra186-dc";
+				reg = <0x15210000 0x10000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
+				clock-names = "dc";
+				resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>;
+				reset-names = "dc";
+
+				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
+				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+				nvidia,head = <1>;
+			};
+
+			display@15220000 {
+				compatible = "nvidia,tegra186-dc";
+				reg = <0x15220000 0x10000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
+				clock-names = "dc";
+				resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>;
+				reset-names = "dc";
+
+				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
+				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+				nvidia,outputs = <&sor0 &sor1>;
+				nvidia,head = <2>;
+			};
+		};
+
+		dsia: dsi@15300000 {
+			compatible = "nvidia,tegra186-dsi";
+			reg = <0x15300000 0x10000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DSI>,
+				 <&bpmp TEGRA186_CLK_DSIA_LP>,
+				 <&bpmp TEGRA186_CLK_PLLD>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&bpmp TEGRA186_RESET_DSI>;
+			reset-names = "dsi";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		};
+
+		vic@15340000 {
+			compatible = "nvidia,tegra186-vic";
+			reg = <0x15340000 0x40000>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_VIC>;
+			clock-names = "vic";
+			resets = <&bpmp TEGRA186_RESET_VIC>;
+			reset-names = "vic";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_VICSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_VICSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_VIC>;
+		};
+
+		nvjpg@15380000 {
+			compatible = "nvidia,tegra186-nvjpg";
+			reg = <0x15380000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVJPG>;
+			clock-names = "nvjpg";
+			resets = <&bpmp TEGRA186_RESET_NVJPG>;
+			reset-names = "nvjpg";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_NVJPG>;
+		};
+
+		dsib: dsi@15400000 {
+			compatible = "nvidia,tegra186-dsi";
+			reg = <0x15400000 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DSIB>,
+				 <&bpmp TEGRA186_CLK_DSIB_LP>,
+				 <&bpmp TEGRA186_CLK_PLLD>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&bpmp TEGRA186_RESET_DSIB>;
+			reset-names = "dsi";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		};
+
+		nvdec@15480000 {
+			compatible = "nvidia,tegra186-nvdec";
+			reg = <0x15480000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVDEC>;
+			clock-names = "nvdec";
+			resets = <&bpmp TEGRA186_RESET_NVDEC>;
+			reset-names = "nvdec";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>;
+			interconnect-names = "dma-mem", "read-1", "write";
+			iommus = <&smmu TEGRA186_SID_NVDEC>;
+		};
+
+		nvenc@154c0000 {
+			compatible = "nvidia,tegra186-nvenc";
+			reg = <0x154c0000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVENC>;
+			clock-names = "nvenc";
+			resets = <&bpmp TEGRA186_RESET_NVENC>;
+			reset-names = "nvenc";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_NVENC>;
+		};
+
+		sor0: sor@15540000 {
+			compatible = "nvidia,tegra186-sor";
+			reg = <0x15540000 0x10000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_SOR0>,
+				 <&bpmp TEGRA186_CLK_SOR0_OUT>,
+				 <&bpmp TEGRA186_CLK_PLLD2>,
+				 <&bpmp TEGRA186_CLK_PLLDP>,
+				 <&bpmp TEGRA186_CLK_SOR_SAFE>,
+				 <&bpmp TEGRA186_CLK_SOR0_PAD_CLKOUT>;
+			clock-names = "sor", "out", "parent", "dp", "safe",
+				      "pad";
+			resets = <&bpmp TEGRA186_RESET_SOR0>;
+			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux_aux>;
+			pinctrl-1 = <&state_dpaux_i2c>;
+			pinctrl-2 = <&state_dpaux_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+			nvidia,interface = <0>;
+		};
+
+		sor1: sor@15580000 {
+			compatible = "nvidia,tegra186-sor";
+			reg = <0x15580000 0x10000>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_SOR1>,
+				 <&bpmp TEGRA186_CLK_SOR1_OUT>,
+				 <&bpmp TEGRA186_CLK_PLLD3>,
+				 <&bpmp TEGRA186_CLK_PLLDP>,
+				 <&bpmp TEGRA186_CLK_SOR_SAFE>,
+				 <&bpmp TEGRA186_CLK_SOR1_PAD_CLKOUT>;
+			clock-names = "sor", "out", "parent", "dp", "safe",
+				      "pad";
+			resets = <&bpmp TEGRA186_RESET_SOR1>;
+			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux1_aux>;
+			pinctrl-1 = <&state_dpaux1_i2c>;
+			pinctrl-2 = <&state_dpaux1_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+			nvidia,interface = <1>;
+		};
+
+		dpaux: dpaux@155c0000 {
+			compatible = "nvidia,tegra186-dpaux";
+			reg = <0x155c0000 0x10000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DPAUX>,
+				 <&bpmp TEGRA186_CLK_PLLDP>;
+			clock-names = "dpaux", "parent";
+			resets = <&bpmp TEGRA186_RESET_DPAUX>;
+			reset-names = "dpaux";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+			state_dpaux_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		padctl@15880000 {
+			compatible = "nvidia,tegra186-dsi-padctl";
+			reg = <0x15880000 0x10000>;
+			resets = <&bpmp TEGRA186_RESET_DSI>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+
+		dsic: dsi@15900000 {
+			compatible = "nvidia,tegra186-dsi";
+			reg = <0x15900000 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DSIC>,
+				 <&bpmp TEGRA186_CLK_DSIC_LP>,
+				 <&bpmp TEGRA186_CLK_PLLD>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&bpmp TEGRA186_RESET_DSIC>;
+			reset-names = "dsi";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		};
+
+		dsid: dsi@15940000 {
+			compatible = "nvidia,tegra186-dsi";
+			reg = <0x15940000 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DSID>,
+				 <&bpmp TEGRA186_CLK_DSID_LP>,
+				 <&bpmp TEGRA186_CLK_PLLD>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&bpmp TEGRA186_RESET_DSID>;
+			reset-names = "dsi";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		};
+	};
+
+	gpu@17000000 {
+		compatible = "nvidia,gp10b";
+		reg = <0x0 0x17000000 0x0 0x1000000>,
+		      <0x0 0x18000000 0x0 0x1000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+
+		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
+			 <&bpmp TEGRA186_CLK_GPU>;
+		clock-names = "gpu", "pwr";
+		resets = <&bpmp TEGRA186_RESET_GPU>;
+		reset-names = "gpu";
+		status = "disabled";
+
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_GPUSRD &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSRD2 &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR2 &emc>;
+		interconnect-names = "dma-mem", "write-0", "read-1", "write-1";
+	};
+
+	sram@30000000 {
+		compatible = "nvidia,tegra186-sysram", "mmio-sram";
+		reg = <0x0 0x30000000 0x0 0x50000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x30000000 0x50000>;
+		no-memory-wc;
+
+		cpu_bpmp_tx: sram@4e000 {
+			reg = <0x4e000 0x1000>;
+			label = "cpu-bpmp-tx";
+			pool;
+		};
+
+		cpu_bpmp_rx: sram@4f000 {
+			reg = <0x4f000 0x1000>;
+			label = "cpu-bpmp-rx";
+			pool;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra186-bpmp";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
+		iommus = <&smmu TEGRA186_SID_BPMP>;
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+				    TEGRA_HSP_DB_MASTER_BPMP>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+
+		bpmp_i2c: i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		bpmp_thermal: thermal {
+			compatible = "nvidia,tegra186-bpmp-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		denver_0: cpu@0 {
+			compatible = "nvidia,tegra186-denver";
+			device_type = "cpu";
+			i-cache-size = <0x20000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_DENVER>;
+			reg = <0x000>;
+		};
+
+		denver_1: cpu@1 {
+			compatible = "nvidia,tegra186-denver";
+			device_type = "cpu";
+			i-cache-size = <0x20000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_DENVER>;
+			reg = <0x001>;
+		};
+
+		ca57_0: cpu@2 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_A57>;
+			reg = <0x100>;
+		};
+
+		ca57_1: cpu@3 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_A57>;
+			reg = <0x101>;
+		};
+
+		ca57_2: cpu@4 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_A57>;
+			reg = <0x102>;
+		};
+
+		ca57_3: cpu@5 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_A57>;
+			reg = <0x103>;
+		};
+
+		L2_DENVER: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		L2_A57: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+	};
+
+	pmu-a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&ca57_0 &ca57_1 &ca57_2 &ca57_3>;
+	};
+
+	pmu-denver {
+		compatible = "nvidia,denver-pmu";
+		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&denver_0 &denver_1>;
+	};
+
+	sound {
+		status = "disabled";
+
+		clocks = <&bpmp TEGRA186_CLK_PLLA>,
+			 <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+		clock-names = "pll_a", "plla_out0";
+		assigned-clocks = <&bpmp TEGRA186_CLK_PLLA>,
+				  <&bpmp TEGRA186_CLK_PLL_A_OUT0>,
+				  <&bpmp TEGRA186_CLK_AUD_MCLK>;
+		assigned-clock-parents = <0>,
+					 <&bpmp TEGRA186_CLK_PLLA>,
+					 <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+		/*
+		 * PLLA supports dynamic ramp. Below initial rate is chosen
+		 * for this to work and oscillate between base rates required
+		 * for 8x and 11.025x sample rate streams.
+		 */
+		assigned-clock-rates = <258000000>;
+
+		iommus = <&smmu TEGRA186_SID_APE>;
+	};
+
+	thermal-zones {
+		/* Cortex-A57 cluster */
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_CPU>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+
+		/* Denver cluster */
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AUX>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_GPU>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+
+		pll-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_PLLX>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+
+		ao-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AO>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+		always-on;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
new file mode 100644
index 0000000000..5b59c1986e
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	model = "NVIDIA Jetson AGX Xavier";
+	compatible = "nvidia,p2888", "nvidia,tegra194";
+
+	aliases {
+		ethernet0 = "/bus@0/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/bus@0/i2c@3160000";
+		i2c2 = "/bus@0/i2c@c240000";
+		i2c3 = "/bus@0/i2c@3180000";
+		i2c4 = "/bus@0/i2c@3190000";
+		i2c5 = "/bus@0/i2c@31c0000";
+		i2c6 = "/bus@0/i2c@c250000";
+		i2c7 = "/bus@0/i2c@31e0000";
+		mmc0 = "/bus@0/mmc@3460000";
+		mmc1 = "/bus@0/mmc@3400000";
+		serial0 = &tcu;
+	};
+
+	chosen {
+		bootargs = "console=ttyTCU0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		ethernet@2490000 {
+			status = "okay";
+
+			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
+			phy-handle = <&phy>;
+			phy-mode = "rgmii-id";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x0>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		memory-controller@2c00000 {
+			status = "okay";
+		};
+
+		serial@3110000 {
+			status = "okay";
+		};
+
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8ls>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		/* SDMMC1 (SD/MMC) */
+		mmc@3400000 {
+			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		/* SDMMC4 (eMMC) */
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+
+			vqmmc-supply = <&vdd_1v8ls>;
+			vmmc-supply = <&vdd_emmc_3v3>;
+		};
+
+		padctl@3520000 {
+			avdd-usb-supply = <&vdd_usb_3v3>;
+			vclamp-usb-supply = <&vdd_1v8ao>;
+
+			ports {
+				usb2-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v_sata>;
+				};
+
+				usb3-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-2 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max20024";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max20024_default>;
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				max20024_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+					in-sd4-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_5v0_sys>;
+					in-ldo7-8-supply = <&vdd_1v8ls>;
+
+					vdd_1v0: sd0 {
+						regulator-name = "VDDIO_SYS_1V0";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8hs: sd1 {
+						regulator-name = "VDDIO_SYS_1V8HS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ls: sd2 {
+						regulator-name = "VDDIO_SYS_1V8LS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ao: sd3 {
+						regulator-name = "VDDIO_AO_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					sd4 {
+						regulator-name = "VDD_DDR_1V1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo0 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <800000>;
+						regulator-max-microvolt = <800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_AO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_emmc_3v3: ldo3 {
+						regulator-name = "VDD_EMMC_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_usb_3v3: ldo5 {
+						regulator-name = "VDD_USB_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo6 {
+						regulator-name = "VDD_SDIO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo7 {
+						regulator-name = "AVDD_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+				};
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp451";
+				reg = <0x4c>;
+
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA194_MAIN_GPIO(H, 2)
+					      IRQ_TYPE_EDGE_FALLING>;
+				vcc-supply = <&vdd_1v8ls>;
+
+				#thermal-sensor-cells = <1>;
+			};
+		};
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "PEX_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	vdd_12v_pcie: regulator-vdd-12v-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_12V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
+
+	vdd_5v_sata: regulator-vdd-5v0-sata {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V_SATA";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
new file mode 100644
index 0000000000..64a3398fe7
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -0,0 +1,2448 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra194-p2888.dtsi"
+
+/ {
+	model = "NVIDIA Jetson AGX Xavier Developer Kit";
+	compatible = "nvidia,p2972-0000", "nvidia,tegra194";
+
+	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			ahub@2900800 {
+				status = "okay";
+
+				i2s@2901000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s1_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s1_ep>;
+							};
+						};
+
+						i2s1_port: port@1 {
+							reg = <1>;
+
+							i2s1_dap_ep: endpoint {
+								dai-format = "i2s";
+								remote-endpoint = <&rt5658_ep>;
+							};
+						};
+					};
+				};
+
+				i2s@2901100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s2_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s2_ep>;
+							};
+						};
+
+						i2s2_port: port@1 {
+							reg = <1>;
+
+							i2s2_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s4_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s4_ep>;
+							};
+						};
+
+						i2s4_port: port@1 {
+							reg = <1>;
+
+							i2s4_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901500 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s6_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s6_ep>;
+							};
+						};
+
+						i2s6_port: port@1 {
+							reg = <1>;
+
+							i2s6_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				sfc@2902000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_in_ep>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_in_ep>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_in_ep>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902600 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_in_ep>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in4_ep>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in2_ep>;
+							};
+						};
+
+						amx2_in3_port: port@2 {
+							reg = <2>;
+
+							amx2_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in3_ep>;
+							};
+						};
+
+						amx2_in4_port: port@3 {
+							reg = <3>;
+
+							amx2_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in4_ep>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in4_ep>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in4_ep>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_out_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903800 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_in_ep>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out1_ep>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out2_ep>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out3_ep>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903900 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_in_ep>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out1_ep>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out2_ep>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out3_ep>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903a00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_in_ep>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out1_ep>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out2_ep>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out3_ep>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903b00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_in_ep>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out1_ep>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out2_ep>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out3_ep>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out4_ep>;
+							};
+						};
+					};
+				};
+
+				dmic@2904200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic3_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic3_ep>;
+							};
+						};
+
+						dmic3_port: port@1 {
+							reg = <1>;
+
+							dmic3_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				processing-engine@2908000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_in_ep>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_in_ep>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amixer@290bb00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mixer_in1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mixer_in2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mixer_in3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mixer_in4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mixer_in5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mixer_in6_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mixer_in7_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in7_ep>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mixer_in8_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in8_ep>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mixer_in9_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in9_ep>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mixer_in10_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in10_ep>;
+							};
+						};
+
+						mixer_out1_port: port@a {
+							reg = <0xa>;
+
+							mixer_out1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out1_ep>;
+							};
+						};
+
+						mixer_out2_port: port@b {
+							reg = <0xb>;
+
+							mixer_out2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out2_ep>;
+							};
+						};
+
+						mixer_out3_port: port@c {
+							reg = <0xc>;
+
+							mixer_out3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out3_ep>;
+							};
+						};
+
+						mixer_out4_port: port@d {
+							reg = <0xd>;
+
+							mixer_out4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out4_ep>;
+							};
+						};
+
+						mixer_out5_port: port@e {
+							reg = <0xe>;
+
+							mixer_out5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out5_ep>;
+							};
+						};
+					};
+				};
+
+				admaif@290f000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0_ep: endpoint {
+								remote-endpoint = <&xbar_admaif0_ep>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1_ep: endpoint {
+								remote-endpoint = <&xbar_admaif1_ep>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2_ep: endpoint {
+								remote-endpoint = <&xbar_admaif2_ep>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3_ep: endpoint {
+								remote-endpoint = <&xbar_admaif3_ep>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4_ep: endpoint {
+								remote-endpoint = <&xbar_admaif4_ep>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5_ep: endpoint {
+								remote-endpoint = <&xbar_admaif5_ep>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6_ep: endpoint {
+								remote-endpoint = <&xbar_admaif6_ep>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7_ep: endpoint {
+								remote-endpoint = <&xbar_admaif7_ep>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8_ep: endpoint {
+								remote-endpoint = <&xbar_admaif8_ep>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9_ep: endpoint {
+								remote-endpoint = <&xbar_admaif9_ep>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10_ep: endpoint {
+								remote-endpoint = <&xbar_admaif10_ep>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11_ep: endpoint {
+								remote-endpoint = <&xbar_admaif11_ep>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12_ep: endpoint {
+								remote-endpoint = <&xbar_admaif12_ep>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13_ep: endpoint {
+								remote-endpoint = <&xbar_admaif13_ep>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14_ep: endpoint {
+								remote-endpoint = <&xbar_admaif14_ep>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15_ep: endpoint {
+								remote-endpoint = <&xbar_admaif15_ep>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16_ep: endpoint {
+								remote-endpoint = <&xbar_admaif16_ep>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17_ep: endpoint {
+								remote-endpoint = <&xbar_admaif17_ep>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18_ep: endpoint {
+								remote-endpoint = <&xbar_admaif18_ep>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19_ep: endpoint {
+								remote-endpoint = <&xbar_admaif19_ep>;
+							};
+						};
+					};
+				};
+
+				asrc@2910000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port: port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0_ep: endpoint {
+							remote-endpoint = <&admaif0_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1_ep: endpoint {
+							remote-endpoint = <&admaif1_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2_ep: endpoint {
+							remote-endpoint = <&admaif2_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3_ep: endpoint {
+							remote-endpoint = <&admaif3_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4_ep: endpoint {
+							remote-endpoint = <&admaif4_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5_ep: endpoint {
+							remote-endpoint = <&admaif5_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6_ep: endpoint {
+							remote-endpoint = <&admaif6_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7_ep: endpoint {
+							remote-endpoint = <&admaif7_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8_ep: endpoint {
+							remote-endpoint = <&admaif8_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9_ep: endpoint {
+							remote-endpoint = <&admaif9_ep>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10_ep: endpoint {
+							remote-endpoint = <&admaif10_ep>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11_ep: endpoint {
+							remote-endpoint = <&admaif11_ep>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12_ep: endpoint {
+							remote-endpoint = <&admaif12_ep>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13_ep: endpoint {
+							remote-endpoint = <&admaif13_ep>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14_ep: endpoint {
+							remote-endpoint = <&admaif14_ep>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15_ep: endpoint {
+							remote-endpoint = <&admaif15_ep>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16_ep: endpoint {
+							remote-endpoint = <&admaif16_ep>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17_ep: endpoint {
+							remote-endpoint = <&admaif17_ep>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18_ep: endpoint {
+							remote-endpoint = <&admaif18_ep>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19_ep: endpoint {
+							remote-endpoint = <&admaif19_ep>;
+						};
+					};
+
+					xbar_i2s1_port: port@14 {
+						reg = <0x14>;
+
+						xbar_i2s1_ep: endpoint {
+							remote-endpoint = <&i2s1_cif_ep>;
+						};
+					};
+
+					xbar_i2s2_port: port@15 {
+						reg = <0x15>;
+
+						xbar_i2s2_ep: endpoint {
+							remote-endpoint = <&i2s2_cif_ep>;
+						};
+					};
+
+					xbar_i2s4_port: port@17 {
+						reg = <0x17>;
+
+						xbar_i2s4_ep: endpoint {
+							remote-endpoint = <&i2s4_cif_ep>;
+						};
+					};
+
+					xbar_i2s6_port: port@19 {
+						reg = <0x19>;
+
+						xbar_i2s6_ep: endpoint {
+							remote-endpoint = <&i2s6_cif_ep>;
+						};
+					};
+
+					xbar_dmic3_port: port@1c {
+						reg = <0x1c>;
+
+						xbar_dmic3_ep: endpoint {
+							remote-endpoint = <&dmic3_cif_ep>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@20 {
+						reg = <0x20>;
+
+						xbar_sfc1_in_ep: endpoint {
+							remote-endpoint = <&sfc1_cif_in_ep>;
+						};
+					};
+
+					port@21 {
+						reg = <0x21>;
+
+						xbar_sfc1_out_ep: endpoint {
+							remote-endpoint = <&sfc1_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@22 {
+						reg = <0x22>;
+
+						xbar_sfc2_in_ep: endpoint {
+							remote-endpoint = <&sfc2_cif_in_ep>;
+						};
+					};
+
+					port@23 {
+						reg = <0x23>;
+
+						xbar_sfc2_out_ep: endpoint {
+							remote-endpoint = <&sfc2_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@24 {
+						reg = <0x24>;
+
+						xbar_sfc3_in_ep: endpoint {
+							remote-endpoint = <&sfc3_cif_in_ep>;
+						};
+					};
+
+					port@25 {
+						reg = <0x25>;
+
+						xbar_sfc3_out_ep: endpoint {
+							remote-endpoint = <&sfc3_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@26 {
+						reg = <0x26>;
+
+						xbar_sfc4_in_ep: endpoint {
+							remote-endpoint = <&sfc4_cif_in_ep>;
+						};
+					};
+
+					port@27 {
+						reg = <0x27>;
+
+						xbar_sfc4_out_ep: endpoint {
+							remote-endpoint = <&sfc4_cif_out_ep>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@28 {
+						reg = <0x28>;
+
+						xbar_mvc1_in_ep: endpoint {
+							remote-endpoint = <&mvc1_cif_in_ep>;
+						};
+					};
+
+					port@29 {
+						reg = <0x29>;
+
+						xbar_mvc1_out_ep: endpoint {
+							remote-endpoint = <&mvc1_cif_out_ep>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_mvc2_in_ep: endpoint {
+							remote-endpoint = <&mvc2_cif_in_ep>;
+						};
+					};
+
+					port@2b {
+						reg = <0x2b>;
+
+						xbar_mvc2_out_ep: endpoint {
+							remote-endpoint = <&mvc2_cif_out_ep>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@2c {
+						reg = <0x2c>;
+
+						xbar_amx1_in1_ep: endpoint {
+							remote-endpoint = <&amx1_in1_ep>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_amx1_in2_ep: endpoint {
+							remote-endpoint = <&amx1_in2_ep>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@2e {
+						reg = <0x2e>;
+
+						xbar_amx1_in3_ep: endpoint {
+							remote-endpoint = <&amx1_in3_ep>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_amx1_in4_ep: endpoint {
+							remote-endpoint = <&amx1_in4_ep>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_amx1_out_ep: endpoint {
+							remote-endpoint = <&amx1_out_ep>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@31 {
+						reg = <0x31>;
+
+						xbar_amx2_in1_ep: endpoint {
+							remote-endpoint = <&amx2_in1_ep>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@32 {
+						reg = <0x32>;
+
+						xbar_amx2_in2_ep: endpoint {
+							remote-endpoint = <&amx2_in2_ep>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@33 {
+						reg = <0x33>;
+
+						xbar_amx2_in3_ep: endpoint {
+							remote-endpoint = <&amx2_in3_ep>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@34 {
+						reg = <0x34>;
+
+						xbar_amx2_in4_ep: endpoint {
+							remote-endpoint = <&amx2_in4_ep>;
+						};
+					};
+
+					port@35 {
+						reg = <0x35>;
+
+						xbar_amx2_out_ep: endpoint {
+							remote-endpoint = <&amx2_out_ep>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@36 {
+						reg = <0x36>;
+
+						xbar_amx3_in1_ep: endpoint {
+							remote-endpoint = <&amx3_in1_ep>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx3_in2_ep: endpoint {
+							remote-endpoint = <&amx3_in2_ep>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx3_in3_ep: endpoint {
+							remote-endpoint = <&amx3_in3_ep>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx3_in4_ep: endpoint {
+							remote-endpoint = <&amx3_in4_ep>;
+						};
+					};
+
+					port@3a {
+						reg = <0x3a>;
+
+						xbar_amx3_out_ep: endpoint {
+							remote-endpoint = <&amx3_out_ep>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@3b {
+						reg = <0x3b>;
+
+						xbar_amx4_in1_ep: endpoint {
+							remote-endpoint = <&amx4_in1_ep>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx4_in2_ep: endpoint {
+							remote-endpoint = <&amx4_in2_ep>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx4_in3_ep: endpoint {
+							remote-endpoint = <&amx4_in3_ep>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx4_in4_ep: endpoint {
+							remote-endpoint = <&amx4_in4_ep>;
+						};
+					};
+
+					port@3f {
+						reg = <0x3f>;
+
+						xbar_amx4_out_ep: endpoint {
+							remote-endpoint = <&amx4_out_ep>;
+						};
+					};
+
+					xbar_adx1_in_port: port@40 {
+						reg = <0x40>;
+
+						xbar_adx1_in_ep: endpoint {
+							remote-endpoint = <&adx1_in_ep>;
+						};
+					};
+
+					port@41 {
+						reg = <0x41>;
+
+						xbar_adx1_out1_ep: endpoint {
+							remote-endpoint = <&adx1_out1_ep>;
+						};
+					};
+
+					port@42 {
+						reg = <0x42>;
+
+						xbar_adx1_out2_ep: endpoint {
+							remote-endpoint = <&adx1_out2_ep>;
+						};
+					};
+
+					port@43 {
+						reg = <0x43>;
+
+						xbar_adx1_out3_ep: endpoint {
+							remote-endpoint = <&adx1_out3_ep>;
+						};
+					};
+
+					port@44 {
+						reg = <0x44>;
+
+						xbar_adx1_out4_ep: endpoint {
+							remote-endpoint = <&adx1_out4_ep>;
+						};
+					};
+
+					xbar_adx2_in_port: port@45 {
+						reg = <0x45>;
+
+						xbar_adx2_in_ep: endpoint {
+							remote-endpoint = <&adx2_in_ep>;
+						};
+					};
+
+					port@46 {
+						reg = <0x46>;
+
+						xbar_adx2_out1_ep: endpoint {
+							remote-endpoint = <&adx2_out1_ep>;
+						};
+					};
+
+					port@47 {
+						reg = <0x47>;
+
+						xbar_adx2_out2_ep: endpoint {
+							remote-endpoint = <&adx2_out2_ep>;
+						};
+					};
+
+					port@48 {
+						reg = <0x48>;
+
+						xbar_adx2_out3_ep: endpoint {
+							remote-endpoint = <&adx2_out3_ep>;
+						};
+					};
+
+					port@49 {
+						reg = <0x49>;
+
+						xbar_adx2_out4_ep: endpoint {
+							remote-endpoint = <&adx2_out4_ep>;
+						};
+					};
+
+					xbar_adx3_in_port: port@4a {
+						reg = <0x4a>;
+
+						xbar_adx3_in_ep: endpoint {
+							remote-endpoint = <&adx3_in_ep>;
+						};
+					};
+
+					port@4b {
+						reg = <0x4b>;
+
+						xbar_adx3_out1_ep: endpoint {
+							remote-endpoint = <&adx3_out1_ep>;
+						};
+					};
+
+					port@4c {
+						reg = <0x4c>;
+
+						xbar_adx3_out2_ep: endpoint {
+							remote-endpoint = <&adx3_out2_ep>;
+						};
+					};
+
+					port@4d {
+						reg = <0x4d>;
+
+						xbar_adx3_out3_ep: endpoint {
+							remote-endpoint = <&adx3_out3_ep>;
+						};
+					};
+
+					port@4e {
+						reg = <0x4e>;
+
+						xbar_adx3_out4_ep: endpoint {
+							remote-endpoint = <&adx3_out4_ep>;
+						};
+					};
+
+					xbar_adx4_in_port: port@4f {
+						reg = <0x4f>;
+
+						xbar_adx4_in_ep: endpoint {
+							remote-endpoint = <&adx4_in_ep>;
+						};
+					};
+
+					port@50 {
+						reg = <0x50>;
+
+						xbar_adx4_out1_ep: endpoint {
+							remote-endpoint = <&adx4_out1_ep>;
+						};
+					};
+
+					port@51 {
+						reg = <0x51>;
+
+						xbar_adx4_out2_ep: endpoint {
+							remote-endpoint = <&adx4_out2_ep>;
+						};
+					};
+
+					port@52 {
+						reg = <0x52>;
+
+						xbar_adx4_out3_ep: endpoint {
+							remote-endpoint = <&adx4_out3_ep>;
+						};
+					};
+
+					port@53 {
+						reg = <0x53>;
+
+						xbar_adx4_out4_ep: endpoint {
+							remote-endpoint = <&adx4_out4_ep>;
+						};
+					};
+
+					xbar_mixer_in1_port: port@54 {
+						reg = <0x54>;
+
+						xbar_mixer_in1_ep: endpoint {
+							remote-endpoint = <&mixer_in1_ep>;
+						};
+					};
+
+					xbar_mixer_in2_port: port@55 {
+						reg = <0x55>;
+
+						xbar_mixer_in2_ep: endpoint {
+							remote-endpoint = <&mixer_in2_ep>;
+						};
+					};
+
+					xbar_mixer_in3_port: port@56 {
+						reg = <0x56>;
+
+						xbar_mixer_in3_ep: endpoint {
+							remote-endpoint = <&mixer_in3_ep>;
+						};
+					};
+
+					xbar_mixer_in4_port: port@57 {
+						reg = <0x57>;
+
+						xbar_mixer_in4_ep: endpoint {
+							remote-endpoint = <&mixer_in4_ep>;
+						};
+					};
+
+					xbar_mixer_in5_port: port@58 {
+						reg = <0x58>;
+
+						xbar_mixer_in5_ep: endpoint {
+							remote-endpoint = <&mixer_in5_ep>;
+						};
+					};
+
+					xbar_mixer_in6_port: port@59 {
+						reg = <0x59>;
+
+						xbar_mixer_in6_ep: endpoint {
+							remote-endpoint = <&mixer_in6_ep>;
+						};
+					};
+
+					xbar_mixer_in7_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_mixer_in7_ep: endpoint {
+							remote-endpoint = <&mixer_in7_ep>;
+						};
+					};
+
+					xbar_mixer_in8_port: port@5b {
+						reg = <0x5b>;
+
+						xbar_mixer_in8_ep: endpoint {
+							remote-endpoint = <&mixer_in8_ep>;
+						};
+					};
+
+					xbar_mixer_in9_port: port@5c {
+						reg = <0x5c>;
+
+						xbar_mixer_in9_ep: endpoint {
+							remote-endpoint = <&mixer_in9_ep>;
+						};
+					};
+
+					xbar_mixer_in10_port: port@5d {
+						reg = <0x5d>;
+
+						xbar_mixer_in10_ep: endpoint {
+							remote-endpoint = <&mixer_in10_ep>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_mixer_out1_ep: endpoint {
+							remote-endpoint = <&mixer_out1_ep>;
+						};
+					};
+
+					port@5f {
+						reg = <0x5f>;
+
+						xbar_mixer_out2_ep: endpoint {
+							remote-endpoint = <&mixer_out2_ep>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_mixer_out3_ep: endpoint {
+							remote-endpoint = <&mixer_out3_ep>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_mixer_out4_ep: endpoint {
+							remote-endpoint = <&mixer_out4_ep>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_mixer_out5_ep: endpoint {
+							remote-endpoint = <&mixer_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in1_port: port@63 {
+						reg = <0x63>;
+
+						xbar_asrc_in1_ep: endpoint {
+							remote-endpoint = <&asrc_in1_ep>;
+						};
+					};
+
+					port@64 {
+						reg = <0x64>;
+
+						xbar_asrc_out1_ep: endpoint {
+							remote-endpoint = <&asrc_out1_ep>;
+						};
+					};
+
+					xbar_asrc_in2_port: port@65 {
+						reg = <0x65>;
+
+						xbar_asrc_in2_ep: endpoint {
+							remote-endpoint = <&asrc_in2_ep>;
+						};
+					};
+
+					port@66 {
+						reg = <0x66>;
+
+						xbar_asrc_out2_ep: endpoint {
+							remote-endpoint = <&asrc_out2_ep>;
+						};
+					};
+
+					xbar_asrc_in3_port: port@67 {
+						reg = <0x67>;
+
+						xbar_asrc_in3_ep: endpoint {
+							remote-endpoint = <&asrc_in3_ep>;
+						};
+					};
+
+					port@68 {
+						reg = <0x68>;
+
+						xbar_asrc_out3_ep: endpoint {
+							remote-endpoint = <&asrc_out3_ep>;
+						};
+					};
+
+					xbar_asrc_in4_port: port@69 {
+						reg = <0x69>;
+
+						xbar_asrc_in4_ep: endpoint {
+							remote-endpoint = <&asrc_in4_ep>;
+						};
+					};
+
+					port@6a {
+						reg = <0x6a>;
+
+						xbar_asrc_out4_ep: endpoint {
+							remote-endpoint = <&asrc_out4_ep>;
+						};
+					};
+
+					xbar_asrc_in5_port: port@6b {
+						reg = <0x6b>;
+
+						xbar_asrc_in5_ep: endpoint {
+							remote-endpoint = <&asrc_in5_ep>;
+						};
+					};
+
+					port@6c {
+						reg = <0x6c>;
+
+						xbar_asrc_out5_ep: endpoint {
+							remote-endpoint = <&asrc_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in6_port: port@6d {
+						reg = <0x6d>;
+
+						xbar_asrc_in6_ep: endpoint {
+							remote-endpoint = <&asrc_in6_ep>;
+						};
+					};
+
+					port@6e {
+						reg = <0x6e>;
+
+						xbar_asrc_out6_ep: endpoint {
+							remote-endpoint = <&asrc_out6_ep>;
+						};
+					};
+
+					xbar_asrc_in7_port: port@6f {
+						reg = <0x6f>;
+
+						xbar_asrc_in7_ep: endpoint {
+							remote-endpoint = <&asrc_in7_ep>;
+						};
+					};
+
+					xbar_ope1_in_port: port@70 {
+						reg = <0x70>;
+
+						xbar_ope1_in_ep: endpoint {
+							remote-endpoint = <&ope1_cif_in_ep>;
+						};
+					};
+
+					port@71 {
+						reg = <0x71>;
+
+						xbar_ope1_out_ep: endpoint {
+							remote-endpoint = <&ope1_cif_out_ep>;
+						};
+					};
+				};
+			};
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+
+		i2c@3160000 {
+			eeprom@56 {
+				compatible = "atmel,24c02";
+				reg = <0x56>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8ls>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		ddc: i2c@31c0000 {
+			status = "okay";
+		};
+
+		/* SDMMC1 (SD/MMC) */
+		mmc@3400000 {
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson AGX Xavier HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-3 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							status = "okay";
+						};
+
+						usb3-2 {
+							status = "okay";
+						};
+
+						usb3-3 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+				};
+
+				usb3-3 {
+					nvidia,usb2-companion = <3>;
+					maximum-speed = "super-speed";
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
+		};
+
+		i2c@c250000 {
+			status = "okay";
+
+			rt5658: audio-codec@1a {
+				status = "okay";
+
+				compatible = "realtek,rt5658";
+				reg = <0x1a>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA194_MAIN_GPIO(S, 5) GPIO_ACTIVE_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>;
+				clock-names = "mclk";
+				realtek,jd-src = <2>;
+				sound-name-prefix = "CVB-RT";
+
+				port {
+					rt5658_ep: endpoint {
+						remote-endpoint = <&i2s1_dap_ep>;
+						mclk-fs = <256>;
+					};
+				};
+			};
+		};
+
+		pwm@c340000 {
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			display-hub@15200000 {
+				status = "okay";
+			};
+
+			dpaux@155c0000 {
+				status = "okay";
+			};
+
+			dpaux@155d0000 {
+				status = "okay";
+			};
+
+			dpaux@155e0000 {
+				status = "okay";
+			};
+
+			/* DP0 */
+			sor@15b00000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+
+				nvidia,dpaux = <&dpaux0>;
+			};
+
+			/* DP1 */
+			sor@15b40000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+
+				nvidia,dpaux = <&dpaux1>;
+			};
+
+			/* HDMI */
+			sor@15b80000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+				hdmi-supply = <&vdd_hdmi>;
+
+				nvidia,ddc-i2c-bus = <&ddc>;
+				nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 2)
+							 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_hsio_0>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14140000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_hsio_7>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14180000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+			       <&p2u_hsio_5>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+			vpcie12v-supply = <&vdd_12v_pcie>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie-ep@141a0000 {
+			status = "disabled";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+			nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+						      GPIO_ACTIVE_HIGH>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
+				       GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_i2s6_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>,
+		       <&mixer_out4_port>, <&mixer_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
+		       <&dmic3_port>;
+
+		label = "NVIDIA Jetson AGX Xavier APE";
+
+		widgets =
+			"Microphone",	"CVB-RT MIC Jack",
+			"Microphone",	"CVB-RT MIC",
+			"Headphone",	"CVB-RT HP Jack",
+			"Speaker",	"CVB-RT SPK";
+
+		routing =
+			/* I2S1 <-> RT5658 */
+			"CVB-RT AIF1 Playback",	"I2S1 DAP-Playback",
+			"I2S1 DAP-Capture",	"CVB-RT AIF1 Capture",
+			/* RT5658 Codec controls */
+			"CVB-RT HP Jack",	"CVB-RT HPO L Playback",
+			"CVB-RT HP Jack",	"CVB-RT HPO R Playback",
+			"CVB-RT IN1P",		"CVB-RT MIC Jack",
+			"CVB-RT IN2P",		"CVB-RT MIC Jack",
+			"CVB-RT SPK",		"CVB-RT SPO Playback",
+			"CVB-RT DMIC L1",	"CVB-RT MIC",
+			"CVB-RT DMIC L2",	"CVB-RT MIC",
+			"CVB-RT DMIC R1",	"CVB-RT MIC",
+			"CVB-RT DMIC R2",	"CVB-RT MIC";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
new file mode 100644
index 0000000000..1c3874b677
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p3668-0000.dtsi"
+#include "tegra194-p3509-0000.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX Developer Kit (SD-card)";
+	compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts
new file mode 100644
index 0000000000..238fd98e8e
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p3668-0001.dtsi"
+#include "tegra194-p3509-0000.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX Developer Kit (eMMC)";
+	compatible = "nvidia,p3509-0000+p3668-0001", "nvidia,tegra194";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
new file mode 100644
index 0000000000..4a17ea5e40
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -0,0 +1,2480 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/tegra194-gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			ahub@2900800 {
+				status = "okay";
+
+				i2s@2901200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s3_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s3_ep>;
+							};
+						};
+
+						i2s3_port: port@1 {
+							reg = <1>;
+
+							i2s3_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s5_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s5_ep>;
+							};
+						};
+
+						i2s5_port: port@1 {
+							reg = <1>;
+
+							i2s5_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				sfc@2902000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_in_ep>;
+								convert-rate = <44100>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_out_ep>;
+								convert-rate = <48000>;
+							};
+						};
+					};
+				};
+
+				sfc@2902200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_in_ep>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_in_ep>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902600 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_in_ep>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in4_ep>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in2_ep>;
+							};
+						};
+
+						amx2_in3_port: port@2 {
+							reg = <2>;
+
+							amx2_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in3_ep>;
+							};
+						};
+
+						amx2_in4_port: port@3 {
+							reg = <3>;
+
+							amx2_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in4_ep>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in4_ep>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in4_ep>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_out_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903800 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_in_ep>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out1_ep>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out2_ep>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out3_ep>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903900 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_in_ep>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out1_ep>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out2_ep>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out3_ep>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903a00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_in_ep>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out1_ep>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out2_ep>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out3_ep>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903b00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_in_ep>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out1_ep>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out2_ep>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out3_ep>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out4_ep>;
+							};
+						};
+					};
+				};
+
+				dmic@2904000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic1_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic1_ep>;
+							};
+						};
+
+						dmic1_port: port@1 {
+							reg = <1>;
+
+							dmic1_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dmic@2904100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic2_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic2_ep>;
+							};
+						};
+
+						dmic2_port: port@1 {
+							reg = <1>;
+
+							dmic2_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dmic@2904300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic4_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic4_ep>;
+							};
+						};
+
+						dmic4_port: port@1 {
+							reg = <1>;
+
+							dmic4_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dspk@2905000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk1_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dspk1_ep>;
+							};
+						};
+
+						dspk1_port: port@1 {
+							reg = <1>;
+
+							dspk1_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dspk@2905100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk2_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dspk2_ep>;
+							};
+						};
+
+						dspk2_port: port@1 {
+							reg = <1>;
+
+							dspk2_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				processing-engine@2908000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_in_ep>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_in_ep>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amixer@290bb00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mixer_in1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mixer_in2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mixer_in3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mixer_in4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mixer_in5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mixer_in6_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mixer_in7_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in7_ep>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mixer_in8_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in8_ep>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mixer_in9_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in9_ep>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mixer_in10_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in10_ep>;
+							};
+						};
+
+						mixer_out1_port: port@a {
+							reg = <0xa>;
+
+							mixer_out1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out1_ep>;
+							};
+						};
+
+						mixer_out2_port: port@b {
+							reg = <0xb>;
+
+							mixer_out2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out2_ep>;
+							};
+						};
+
+						mixer_out3_port: port@c {
+							reg = <0xc>;
+
+							mixer_out3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out3_ep>;
+							};
+						};
+
+						mixer_out4_port: port@d {
+							reg = <0xd>;
+
+							mixer_out4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out4_ep>;
+							};
+						};
+
+						mixer_out5_port: port@e {
+							reg = <0xe>;
+
+							mixer_out5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out5_ep>;
+							};
+						};
+					};
+				};
+
+				admaif@290f000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0_ep: endpoint {
+								remote-endpoint = <&xbar_admaif0_ep>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1_ep: endpoint {
+								remote-endpoint = <&xbar_admaif1_ep>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2_ep: endpoint {
+								remote-endpoint = <&xbar_admaif2_ep>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3_ep: endpoint {
+								remote-endpoint = <&xbar_admaif3_ep>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4_ep: endpoint {
+								remote-endpoint = <&xbar_admaif4_ep>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5_ep: endpoint {
+								remote-endpoint = <&xbar_admaif5_ep>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6_ep: endpoint {
+								remote-endpoint = <&xbar_admaif6_ep>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7_ep: endpoint {
+								remote-endpoint = <&xbar_admaif7_ep>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8_ep: endpoint {
+								remote-endpoint = <&xbar_admaif8_ep>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9_ep: endpoint {
+								remote-endpoint = <&xbar_admaif9_ep>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10_ep: endpoint {
+								remote-endpoint = <&xbar_admaif10_ep>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11_ep: endpoint {
+								remote-endpoint = <&xbar_admaif11_ep>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12_ep: endpoint {
+								remote-endpoint = <&xbar_admaif12_ep>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13_ep: endpoint {
+								remote-endpoint = <&xbar_admaif13_ep>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14_ep: endpoint {
+								remote-endpoint = <&xbar_admaif14_ep>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15_ep: endpoint {
+								remote-endpoint = <&xbar_admaif15_ep>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16_ep: endpoint {
+								remote-endpoint = <&xbar_admaif16_ep>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17_ep: endpoint {
+								remote-endpoint = <&xbar_admaif17_ep>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18_ep: endpoint {
+								remote-endpoint = <&xbar_admaif18_ep>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19_ep: endpoint {
+								remote-endpoint = <&xbar_admaif19_ep>;
+							};
+						};
+					};
+				};
+
+				asrc@2910000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port:	port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0_ep: endpoint {
+							remote-endpoint = <&admaif0_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1_ep: endpoint {
+							remote-endpoint = <&admaif1_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2_ep: endpoint {
+							remote-endpoint = <&admaif2_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3_ep: endpoint {
+							remote-endpoint = <&admaif3_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4_ep: endpoint {
+							remote-endpoint = <&admaif4_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5_ep: endpoint {
+							remote-endpoint = <&admaif5_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6_ep: endpoint {
+							remote-endpoint = <&admaif6_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7_ep: endpoint {
+							remote-endpoint = <&admaif7_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8_ep: endpoint {
+							remote-endpoint = <&admaif8_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9_ep: endpoint {
+							remote-endpoint = <&admaif9_ep>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10_ep: endpoint {
+							remote-endpoint = <&admaif10_ep>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11_ep: endpoint {
+							remote-endpoint = <&admaif11_ep>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12_ep: endpoint {
+							remote-endpoint = <&admaif12_ep>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13_ep: endpoint {
+							remote-endpoint = <&admaif13_ep>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14_ep: endpoint {
+							remote-endpoint = <&admaif14_ep>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15_ep: endpoint {
+							remote-endpoint = <&admaif15_ep>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16_ep: endpoint {
+							remote-endpoint = <&admaif16_ep>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17_ep: endpoint {
+							remote-endpoint = <&admaif17_ep>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18_ep: endpoint {
+							remote-endpoint = <&admaif18_ep>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19_ep: endpoint {
+							remote-endpoint = <&admaif19_ep>;
+						};
+					};
+
+					xbar_i2s3_port: port@16 {
+						reg = <0x16>;
+
+						xbar_i2s3_ep: endpoint {
+							remote-endpoint = <&i2s3_cif_ep>;
+						};
+					};
+
+					xbar_i2s5_port: port@18 {
+						reg = <0x18>;
+
+						xbar_i2s5_ep: endpoint {
+							remote-endpoint = <&i2s5_cif_ep>;
+						};
+					};
+
+					xbar_dmic1_port: port@1a {
+						reg = <0x1a>;
+
+						xbar_dmic1_ep: endpoint {
+							remote-endpoint = <&dmic1_cif_ep>;
+						};
+					};
+
+					xbar_dmic2_port: port@1b {
+						reg = <0x1b>;
+
+						xbar_dmic2_ep: endpoint {
+							remote-endpoint = <&dmic2_cif_ep>;
+						};
+					};
+
+					xbar_dmic4_port: port@1d {
+						reg = <0x1d>;
+
+						xbar_dmic4_ep: endpoint {
+							remote-endpoint = <&dmic4_cif_ep>;
+						};
+					};
+
+					xbar_dspk1_port: port@1e {
+						reg = <0x1e>;
+
+						xbar_dspk1_ep: endpoint {
+							remote-endpoint = <&dspk1_cif_ep>;
+						};
+					};
+
+					xbar_dspk2_port: port@1f {
+						reg = <0x1f>;
+
+						xbar_dspk2_ep: endpoint {
+							remote-endpoint = <&dspk2_cif_ep>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@20 {
+						reg = <0x20>;
+
+						xbar_sfc1_in_ep: endpoint {
+							remote-endpoint = <&sfc1_cif_in_ep>;
+						};
+					};
+
+					port@21 {
+						reg = <0x21>;
+
+						xbar_sfc1_out_ep: endpoint {
+							remote-endpoint = <&sfc1_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@22 {
+						reg = <0x22>;
+
+						xbar_sfc2_in_ep: endpoint {
+							remote-endpoint = <&sfc2_cif_in_ep>;
+						};
+					};
+
+					port@23 {
+						reg = <0x23>;
+
+						xbar_sfc2_out_ep: endpoint {
+							remote-endpoint = <&sfc2_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@24 {
+						reg = <0x24>;
+
+						xbar_sfc3_in_ep: endpoint {
+							remote-endpoint = <&sfc3_cif_in_ep>;
+						};
+					};
+
+					port@25 {
+						reg = <0x25>;
+
+						xbar_sfc3_out_ep: endpoint {
+							remote-endpoint = <&sfc3_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@26 {
+						reg = <0x26>;
+
+						xbar_sfc4_in_ep: endpoint {
+							remote-endpoint = <&sfc4_cif_in_ep>;
+						};
+					};
+
+					port@27 {
+						reg = <0x27>;
+
+						xbar_sfc4_out_ep: endpoint {
+							remote-endpoint = <&sfc4_cif_out_ep>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@28 {
+						reg = <0x28>;
+
+						xbar_mvc1_in_ep: endpoint {
+							remote-endpoint = <&mvc1_cif_in_ep>;
+						};
+					};
+
+					port@29 {
+						reg = <0x29>;
+
+						xbar_mvc1_out_ep: endpoint {
+							remote-endpoint = <&mvc1_cif_out_ep>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_mvc2_in_ep: endpoint {
+							remote-endpoint = <&mvc2_cif_in_ep>;
+						};
+					};
+
+					port@2b {
+						reg = <0x2b>;
+
+						xbar_mvc2_out_ep: endpoint {
+							remote-endpoint = <&mvc2_cif_out_ep>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@2c {
+						reg = <0x2c>;
+
+						xbar_amx1_in1_ep: endpoint {
+							remote-endpoint = <&amx1_in1_ep>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_amx1_in2_ep: endpoint {
+							remote-endpoint = <&amx1_in2_ep>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@2e {
+						reg = <0x2e>;
+
+						xbar_amx1_in3_ep: endpoint {
+							remote-endpoint = <&amx1_in3_ep>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_amx1_in4_ep: endpoint {
+							remote-endpoint = <&amx1_in4_ep>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_amx1_out_ep: endpoint {
+							remote-endpoint = <&amx1_out_ep>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@31 {
+						reg = <0x31>;
+
+						xbar_amx2_in1_ep: endpoint {
+							remote-endpoint = <&amx2_in1_ep>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@32 {
+						reg = <0x32>;
+
+						xbar_amx2_in2_ep: endpoint {
+							remote-endpoint = <&amx2_in2_ep>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@33 {
+						reg = <0x33>;
+
+						xbar_amx2_in3_ep: endpoint {
+							remote-endpoint = <&amx2_in3_ep>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@34 {
+						reg = <0x34>;
+
+						xbar_amx2_in4_ep: endpoint {
+							remote-endpoint = <&amx2_in4_ep>;
+						};
+					};
+
+					port@35 {
+						reg = <0x35>;
+
+						xbar_amx2_out_ep: endpoint {
+							remote-endpoint = <&amx2_out_ep>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@36 {
+						reg = <0x36>;
+
+						xbar_amx3_in1_ep: endpoint {
+							remote-endpoint = <&amx3_in1_ep>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx3_in2_ep: endpoint {
+							remote-endpoint = <&amx3_in2_ep>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx3_in3_ep: endpoint {
+							remote-endpoint = <&amx3_in3_ep>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx3_in4_ep: endpoint {
+							remote-endpoint = <&amx3_in4_ep>;
+						};
+					};
+
+					port@3a {
+						reg = <0x3a>;
+
+						xbar_amx3_out_ep: endpoint {
+							remote-endpoint = <&amx3_out_ep>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@3b {
+						reg = <0x3b>;
+
+						xbar_amx4_in1_ep: endpoint {
+							remote-endpoint = <&amx4_in1_ep>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx4_in2_ep: endpoint {
+							remote-endpoint = <&amx4_in2_ep>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx4_in3_ep: endpoint {
+							remote-endpoint = <&amx4_in3_ep>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx4_in4_ep: endpoint {
+							remote-endpoint = <&amx4_in4_ep>;
+						};
+					};
+
+					port@3f {
+						reg = <0x3f>;
+
+						xbar_amx4_out_ep: endpoint {
+							remote-endpoint = <&amx4_out_ep>;
+						};
+					};
+
+					xbar_adx1_in_port: port@40 {
+						reg = <0x40>;
+
+						xbar_adx1_in_ep: endpoint {
+							remote-endpoint = <&adx1_in_ep>;
+						};
+					};
+
+					port@41 {
+						reg = <0x41>;
+
+						xbar_adx1_out1_ep: endpoint {
+							remote-endpoint = <&adx1_out1_ep>;
+						};
+					};
+
+					port@42 {
+						reg = <0x42>;
+
+						xbar_adx1_out2_ep: endpoint {
+							remote-endpoint = <&adx1_out2_ep>;
+						};
+					};
+
+					port@43 {
+						reg = <0x43>;
+
+						xbar_adx1_out3_ep: endpoint {
+							remote-endpoint = <&adx1_out3_ep>;
+						};
+					};
+
+					port@44 {
+						reg = <0x44>;
+
+						xbar_adx1_out4_ep: endpoint {
+							remote-endpoint = <&adx1_out4_ep>;
+						};
+					};
+
+					xbar_adx2_in_port: port@45 {
+						reg = <0x45>;
+
+						xbar_adx2_in_ep: endpoint {
+							remote-endpoint = <&adx2_in_ep>;
+						};
+					};
+
+					port@46 {
+						reg = <0x46>;
+
+						xbar_adx2_out1_ep: endpoint {
+							remote-endpoint = <&adx2_out1_ep>;
+						};
+					};
+
+					port@47 {
+						reg = <0x47>;
+
+						xbar_adx2_out2_ep: endpoint {
+							remote-endpoint = <&adx2_out2_ep>;
+						};
+					};
+
+					port@48 {
+						reg = <0x48>;
+
+						xbar_adx2_out3_ep: endpoint {
+							remote-endpoint = <&adx2_out3_ep>;
+						};
+					};
+
+					port@49 {
+						reg = <0x49>;
+
+						xbar_adx2_out4_ep: endpoint {
+							remote-endpoint = <&adx2_out4_ep>;
+						};
+					};
+
+					xbar_adx3_in_port: port@4a {
+						reg = <0x4a>;
+
+						xbar_adx3_in_ep: endpoint {
+							remote-endpoint = <&adx3_in_ep>;
+						};
+					};
+
+					port@4b {
+						reg = <0x4b>;
+
+						xbar_adx3_out1_ep: endpoint {
+							remote-endpoint = <&adx3_out1_ep>;
+						};
+					};
+
+					port@4c {
+						reg = <0x4c>;
+
+						xbar_adx3_out2_ep: endpoint {
+							remote-endpoint = <&adx3_out2_ep>;
+						};
+					};
+
+					port@4d {
+						reg = <0x4d>;
+
+						xbar_adx3_out3_ep: endpoint {
+							remote-endpoint = <&adx3_out3_ep>;
+						};
+					};
+
+					port@4e {
+						reg = <0x4e>;
+
+						xbar_adx3_out4_ep: endpoint {
+							remote-endpoint = <&adx3_out4_ep>;
+						};
+					};
+
+					xbar_adx4_in_port: port@4f {
+						reg = <0x4f>;
+
+						xbar_adx4_in_ep: endpoint {
+							remote-endpoint = <&adx4_in_ep>;
+						};
+					};
+
+					port@50 {
+						reg = <0x50>;
+
+						xbar_adx4_out1_ep: endpoint {
+							remote-endpoint = <&adx4_out1_ep>;
+						};
+					};
+
+					port@51 {
+						reg = <0x51>;
+
+						xbar_adx4_out2_ep: endpoint {
+							remote-endpoint = <&adx4_out2_ep>;
+						};
+					};
+
+					port@52 {
+						reg = <0x52>;
+
+						xbar_adx4_out3_ep: endpoint {
+							remote-endpoint = <&adx4_out3_ep>;
+						};
+					};
+
+					port@53 {
+						reg = <0x53>;
+
+						xbar_adx4_out4_ep: endpoint {
+							remote-endpoint = <&adx4_out4_ep>;
+						};
+					};
+
+					xbar_mixer_in1_port: port@54 {
+						reg = <0x54>;
+
+						xbar_mixer_in1_ep: endpoint {
+							remote-endpoint = <&mixer_in1_ep>;
+						};
+					};
+
+					xbar_mixer_in2_port: port@55 {
+						reg = <0x55>;
+
+						xbar_mixer_in2_ep: endpoint {
+							remote-endpoint = <&mixer_in2_ep>;
+						};
+					};
+
+					xbar_mixer_in3_port: port@56 {
+						reg = <0x56>;
+
+						xbar_mixer_in3_ep: endpoint {
+							remote-endpoint = <&mixer_in3_ep>;
+						};
+					};
+
+					xbar_mixer_in4_port: port@57 {
+						reg = <0x57>;
+
+						xbar_mixer_in4_ep: endpoint {
+							remote-endpoint = <&mixer_in4_ep>;
+						};
+					};
+
+					xbar_mixer_in5_port: port@58 {
+						reg = <0x58>;
+
+						xbar_mixer_in5_ep: endpoint {
+							remote-endpoint = <&mixer_in5_ep>;
+						};
+					};
+
+					xbar_mixer_in6_port: port@59 {
+						reg = <0x59>;
+
+						xbar_mixer_in6_ep: endpoint {
+							remote-endpoint = <&mixer_in6_ep>;
+						};
+					};
+
+					xbar_mixer_in7_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_mixer_in7_ep: endpoint {
+							remote-endpoint = <&mixer_in7_ep>;
+						};
+					};
+
+					xbar_mixer_in8_port: port@5b {
+						reg = <0x5b>;
+
+						xbar_mixer_in8_ep: endpoint {
+							remote-endpoint = <&mixer_in8_ep>;
+						};
+					};
+
+					xbar_mixer_in9_port: port@5c {
+						reg = <0x5c>;
+
+						xbar_mixer_in9_ep: endpoint {
+							remote-endpoint = <&mixer_in9_ep>;
+						};
+					};
+
+					xbar_mixer_in10_port: port@5d {
+						reg = <0x5d>;
+
+						xbar_mixer_in10_ep: endpoint {
+							remote-endpoint = <&mixer_in10_ep>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_mixer_out1_ep: endpoint {
+							remote-endpoint = <&mixer_out1_ep>;
+						};
+					};
+
+					port@5f {
+						reg = <0x5f>;
+
+						xbar_mixer_out2_ep: endpoint {
+							remote-endpoint = <&mixer_out2_ep>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_mixer_out3_ep: endpoint {
+							remote-endpoint = <&mixer_out3_ep>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_mixer_out4_ep: endpoint {
+							remote-endpoint = <&mixer_out4_ep>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_mixer_out5_ep: endpoint {
+							remote-endpoint = <&mixer_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in1_port: port@63 {
+						reg = <0x63>;
+
+						xbar_asrc_in1_ep: endpoint {
+							remote-endpoint = <&asrc_in1_ep>;
+						};
+					};
+
+					port@64 {
+						reg = <0x64>;
+
+						xbar_asrc_out1_ep: endpoint {
+							remote-endpoint = <&asrc_out1_ep>;
+						};
+					};
+
+					xbar_asrc_in2_port: port@65 {
+						reg = <0x65>;
+
+						xbar_asrc_in2_ep: endpoint {
+							remote-endpoint = <&asrc_in2_ep>;
+						};
+					};
+
+					port@66 {
+						reg = <0x66>;
+
+						xbar_asrc_out2_ep: endpoint {
+							remote-endpoint = <&asrc_out2_ep>;
+						};
+					};
+
+					xbar_asrc_in3_port: port@67 {
+						reg = <0x67>;
+
+						xbar_asrc_in3_ep: endpoint {
+							remote-endpoint = <&asrc_in3_ep>;
+						};
+					};
+
+					port@68 {
+						reg = <0x68>;
+
+						xbar_asrc_out3_ep: endpoint {
+							remote-endpoint = <&asrc_out3_ep>;
+						};
+					};
+
+					xbar_asrc_in4_port: port@69 {
+						reg = <0x69>;
+
+						xbar_asrc_in4_ep: endpoint {
+							remote-endpoint = <&asrc_in4_ep>;
+						};
+					};
+
+					port@6a {
+						reg = <0x6a>;
+
+						xbar_asrc_out4_ep: endpoint {
+							remote-endpoint = <&asrc_out4_ep>;
+						};
+					};
+
+					xbar_asrc_in5_port: port@6b {
+						reg = <0x6b>;
+
+						xbar_asrc_in5_ep: endpoint {
+							remote-endpoint = <&asrc_in5_ep>;
+						};
+					};
+
+					port@6c {
+						reg = <0x6c>;
+
+						xbar_asrc_out5_ep: endpoint {
+							remote-endpoint = <&asrc_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in6_port: port@6d {
+						reg = <0x6d>;
+
+						xbar_asrc_in6_ep: endpoint {
+							remote-endpoint = <&asrc_in6_ep>;
+						};
+					};
+
+					port@6e {
+						reg = <0x6e>;
+
+						xbar_asrc_out6_ep: endpoint {
+							remote-endpoint = <&asrc_out6_ep>;
+						};
+					};
+
+					xbar_asrc_in7_port: port@6f {
+						reg = <0x6f>;
+
+						xbar_asrc_in7_ep: endpoint {
+							remote-endpoint = <&asrc_in7_ep>;
+						};
+					};
+
+					xbar_ope1_in_port: port@70 {
+						reg = <0x70>;
+
+						xbar_ope1_in_ep: endpoint {
+							remote-endpoint = <&ope1_cif_in_ep>;
+						};
+					};
+
+					port@71 {
+						reg = <0x71>;
+
+						xbar_ope1_out_ep: endpoint {
+							remote-endpoint = <&ope1_cif_out_ep>;
+						};
+					};
+				};
+			};
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+
+		i2c@3160000 {
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		ddc: i2c@3190000 {
+			status = "okay";
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <102000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		pwm@32d0000 {
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Xavier NX HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-2 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-2 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "otg";
+					status = "okay";
+					usb-role-switch;
+					connector {
+						compatible = "gpio-usb-b-connector",
+							"usb-b-connector";
+						label = "micro-USB";
+						type = "micro";
+						vbus-gpios = <&gpio TEGRA194_MAIN_GPIO(Z, 1)
+								    GPIO_ACTIVE_LOW>;
+					};
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-2 {
+					mode = "host";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <1>;
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>;
+			phy-names = "usb2-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-1", "usb2-2", "usb3-2";
+		};
+
+		host1x@13e00000 {
+			display-hub@15200000 {
+				status = "okay";
+			};
+
+			dpaux@155c0000 {
+				status = "okay";
+			};
+
+			dpaux@155d0000 {
+				status = "okay";
+			};
+
+			/* DP0 */
+			sor@15b00000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+
+				nvidia,dpaux = <&dpaux0>;
+			};
+
+			/* HDMI */
+			sor@15b40000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+				hdmi-supply = <&vdd_hdmi>;
+
+				nvidia,ddc-i2c-bus = <&ddc>;
+				nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1)
+							 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_hsio_11>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie-ep@141a0000 {
+			status = "disabled";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+			nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+						      GPIO_ACTIVE_HIGH>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
+				       GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm6 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s3_port>, <&xbar_i2s5_port>,
+		       <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic4_port>,
+		       <&xbar_dspk1_port>, <&xbar_dspk2_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>,
+		       <&mixer_out3_port>, <&mixer_out4_port>,
+		       <&mixer_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s3_port>, <&i2s5_port>,
+		       <&dmic1_port>, <&dmic2_port>, <&dmic4_port>,
+		       <&dspk1_port>, <&dspk2_port>;
+
+		label = "NVIDIA Jetson Xavier NX APE";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
new file mode 100644
index 0000000000..8c2c709dd5
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194-p3668.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX (SD-card)";
+	compatible = "nvidia,p3668-0000", "nvidia,tegra194";
+
+	aliases {
+		mmc0 = "/bus@0/mmc@3400000";
+	};
+
+	bus@0 {
+		/* SDMMC1 (SD/MMC) */
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+			vmmc-supply = <&vdd_3v3_sd>;
+		};
+	};
+
+	vdd_3v3_sd: regulator-vdd-3v3-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(G, 2) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi
new file mode 100644
index 0000000000..f5a9ebbfb1
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194-p3668.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX (eMMC)";
+	compatible = "nvidia,p3668-0001", "nvidia,tegra194";
+
+	aliases {
+		mmc0 = "/bus@0/mmc@3460000";
+	};
+
+	bus@0 {
+		/* SDMMC4 (eMMC) */
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+
+			vqmmc-supply = <&vdd_1v8ls>;
+			vmmc-supply = <&vdd_emmc_3v3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
new file mode 100644
index 0000000000..58f190b0f8
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	aliases {
+		ethernet0 = "/bus@0/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/bus@0/i2c@3160000";
+		i2c2 = "/bus@0/i2c@c240000";
+		i2c3 = "/bus@0/i2c@3180000";
+		i2c4 = "/bus@0/i2c@3190000";
+		i2c5 = "/bus@0/i2c@31c0000";
+		i2c6 = "/bus@0/i2c@c250000";
+		i2c7 = "/bus@0/i2c@31e0000";
+		rtc0 = "/bpmp/i2c/pmic@3c";
+		rtc1 = "/bus@0/rtc@c2a0000";
+		serial0 = &tcu;
+	};
+
+	chosen {
+		bootargs = "console=ttyTCU0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		ethernet@2490000 {
+			status = "okay";
+
+			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			phy-handle = <&phy>;
+			phy-mode = "rgmii-id";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x0>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		memory-controller@2c00000 {
+			status = "okay";
+		};
+
+		serial@3100000 {
+			status = "okay";
+		};
+
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8ls>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		padctl@3520000 {
+			avdd-usb-supply = <&vdd_usb_3v3>;
+			vclamp-usb-supply = <&vdd_1v8ao>;
+
+			ports {
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max20024";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max20024_default>;
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				max20024_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+					in-sd4-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_5v0_sys>;
+					in-ldo7-8-supply = <&vdd_1v8ls>;
+
+					vdd_1v0: sd0 {
+						regulator-name = "VDDIO_SYS_1V0";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8hs: sd1 {
+						regulator-name = "VDDIO_SYS_1V8HS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ls: sd2 {
+						regulator-name = "VDDIO_SYS_1V8LS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ao: sd3 {
+						regulator-name = "VDDIO_AO_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					sd4 {
+						regulator-name = "VDD_DDR_1V1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo0 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <800000>;
+						regulator-max-microvolt = <800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_AO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_emmc_3v3: ldo3 {
+						regulator-name = "VDD_EMMC_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_usb_3v3: ldo5 {
+						regulator-name = "VDD_USB_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo6 {
+						regulator-name = "VDD_SDIO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo7 {
+						regulator-name = "AVDD_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
new file mode 100644
index 0000000000..33f92b77cd
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -0,0 +1,3180 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra194-clock.h>
+#include <dt-bindings/gpio/tegra194-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/power/tegra194-powergate.h>
+#include <dt-bindings/reset/tegra194-reset.h>
+#include <dt-bindings/thermal/tegra194-bpmp-thermal.h>
+#include <dt-bindings/memory/tegra194-mc.h>
+
+/ {
+	compatible = "nvidia,tegra194";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* control backbone */
+	bus@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		apbmisc: misc@100000 {
+			compatible = "nvidia,tegra194-misc";
+			reg = <0x0 0x00100000 0x0 0xf000>,
+			      <0x0 0x0010f000 0x0 0x1000>;
+		};
+
+		gpio: gpio@2200000 {
+			compatible = "nvidia,tegra194-gpio";
+			reg-names = "security", "gpio";
+			reg = <0x0 0x2200000 0x0 0x10000>,
+			      <0x0 0x2210000 0x0 0x10000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pinmux 0 0 169>;
+		};
+
+		cbb-noc@2300000 {
+			compatible = "nvidia,tegra194-cbb-noc";
+			reg = <0x0 0x02300000 0x0 0x1000>;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		axi2apb: axi2apb@2390000 {
+			compatible = "nvidia,tegra194-axi2apb";
+			reg = <0x0 0x2390000 0x0 0x1000>,
+			      <0x0 0x23a0000 0x0 0x1000>,
+			      <0x0 0x23b0000 0x0 0x1000>,
+			      <0x0 0x23c0000 0x0 0x1000>,
+			      <0x0 0x23d0000 0x0 0x1000>,
+			      <0x0 0x23e0000 0x0 0x1000>;
+			status = "okay";
+		};
+
+		pinmux: pinmux@2430000 {
+			compatible = "nvidia,tegra194-pinmux";
+			reg = <0x0 0x2430000 0x0 0x17000>;
+			status = "okay";
+
+			pex_clkreq_c5_bi_dir_state: pinmux-pex-clkreq-c5-bi-dir {
+				clkreq {
+					nvidia,pins = "pex_l5_clkreq_n_pgg0";
+					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+					nvidia,tristate = <TEGRA_PIN_DISABLE>;
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				};
+			};
+
+			pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+				pex_rst {
+					nvidia,pins = "pex_l5_rst_n_pgg1";
+					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+					nvidia,tristate = <TEGRA_PIN_DISABLE>;
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				};
+			};
+		};
+
+		ethernet@2490000 {
+			compatible = "nvidia,tegra194-eqos",
+				     "nvidia,tegra186-eqos",
+				     "snps,dwc-qos-ethernet-4.10";
+			reg = <0x0 0x02490000 0x0 0x10000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_AXI_CBB>,
+				 <&bpmp TEGRA194_CLK_EQOS_AXI>,
+				 <&bpmp TEGRA194_CLK_EQOS_RX>,
+				 <&bpmp TEGRA194_CLK_EQOS_TX>,
+				 <&bpmp TEGRA194_CLK_EQOS_PTP_REF>;
+			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
+			resets = <&bpmp TEGRA194_RESET_EQOS>;
+			reset-names = "eqos";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_EQOSR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_EQOSW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_EQOS>;
+			status = "disabled";
+
+			snps,write-requests = <1>;
+			snps,read-requests = <3>;
+			snps,burst-map = <0x7>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <8>;
+		};
+
+		gpcdma: dma-controller@2600000 {
+			compatible = "nvidia,tegra194-gpcdma",
+				     "nvidia,tegra186-gpcdma";
+			reg = <0x0 0x2600000 0x0 0x210000>;
+			resets = <&bpmp TEGRA194_RESET_GPCDMA>;
+			reset-names = "gpcdma";
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&smmu TEGRA194_SID_GPCDMA_0>;
+			dma-coherent;
+			dma-channel-mask = <0xfffffffe>;
+			status = "okay";
+		};
+
+		aconnect@2900000 {
+			compatible = "nvidia,tegra194-aconnect",
+				     "nvidia,tegra210-aconnect";
+			clocks = <&bpmp TEGRA194_CLK_APE>,
+				 <&bpmp TEGRA194_CLK_APB2APE>;
+			clock-names = "ape", "apb2ape";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_AUD>;
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>;
+
+			tegra_ahub: ahub@2900800 {
+				compatible = "nvidia,tegra194-ahub",
+					     "nvidia,tegra186-ahub";
+				reg = <0x0 0x02900800 0x0 0x800>;
+				clocks = <&bpmp TEGRA194_CLK_AHUB>;
+				clock-names = "ahub";
+				assigned-clocks = <&bpmp TEGRA194_CLK_AHUB>;
+				assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLP_OUT0>;
+				assigned-clock-rates = <81600000>;
+				status = "disabled";
+
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>;
+
+				tegra_i2s1: i2s@2901000 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901000 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S1>,
+						 <&bpmp TEGRA194_CLK_I2S1_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S1>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S1";
+					status = "disabled";
+				};
+
+				tegra_i2s2: i2s@2901100 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901100 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S2>,
+						 <&bpmp TEGRA194_CLK_I2S2_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S2>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S2";
+					status = "disabled";
+				};
+
+				tegra_i2s3: i2s@2901200 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901200 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S3>,
+						 <&bpmp TEGRA194_CLK_I2S3_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S3>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S3";
+					status = "disabled";
+				};
+
+				tegra_i2s4: i2s@2901300 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901300 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S4>,
+						 <&bpmp TEGRA194_CLK_I2S4_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S4>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S4";
+					status = "disabled";
+				};
+
+				tegra_i2s5: i2s@2901400 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901400 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S5>,
+						 <&bpmp TEGRA194_CLK_I2S5_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S5>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S5";
+					status = "disabled";
+				};
+
+				tegra_i2s6: i2s@2901500 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901500 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S6>,
+						 <&bpmp TEGRA194_CLK_I2S6_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S6>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S6";
+					status = "disabled";
+				};
+
+				tegra_sfc1: sfc@2902000 {
+					compatible = "nvidia,tegra194-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902000 0x0 0x200>;
+					sound-name-prefix = "SFC1";
+					status = "disabled";
+				};
+
+				tegra_sfc2: sfc@2902200 {
+					compatible = "nvidia,tegra194-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902200 0x0 0x200>;
+					sound-name-prefix = "SFC2";
+					status = "disabled";
+				};
+
+				tegra_sfc3: sfc@2902400 {
+					compatible = "nvidia,tegra194-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902400 0x0 0x200>;
+					sound-name-prefix = "SFC3";
+					status = "disabled";
+				};
+
+				tegra_sfc4: sfc@2902600 {
+					compatible = "nvidia,tegra194-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902600 0x0 0x200>;
+					sound-name-prefix = "SFC4";
+					status = "disabled";
+				};
+
+				tegra_amx1: amx@2903000 {
+					compatible = "nvidia,tegra194-amx";
+					reg = <0x0 0x2903000 0x0 0x100>;
+					sound-name-prefix = "AMX1";
+					status = "disabled";
+				};
+
+				tegra_amx2: amx@2903100 {
+					compatible = "nvidia,tegra194-amx";
+					reg = <0x0 0x2903100 0x0 0x100>;
+					sound-name-prefix = "AMX2";
+					status = "disabled";
+				};
+
+				tegra_amx3: amx@2903200 {
+					compatible = "nvidia,tegra194-amx";
+					reg = <0x0 0x2903200 0x0 0x100>;
+					sound-name-prefix = "AMX3";
+					status = "disabled";
+				};
+
+				tegra_amx4: amx@2903300 {
+					compatible = "nvidia,tegra194-amx";
+					reg = <0x0 0x2903300 0x0 0x100>;
+					sound-name-prefix = "AMX4";
+					status = "disabled";
+				};
+
+				tegra_adx1: adx@2903800 {
+					compatible = "nvidia,tegra194-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903800 0x0 0x100>;
+					sound-name-prefix = "ADX1";
+					status = "disabled";
+				};
+
+				tegra_adx2: adx@2903900 {
+					compatible = "nvidia,tegra194-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903900 0x0 0x100>;
+					sound-name-prefix = "ADX2";
+					status = "disabled";
+				};
+
+				tegra_adx3: adx@2903a00 {
+					compatible = "nvidia,tegra194-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903a00 0x0 0x100>;
+					sound-name-prefix = "ADX3";
+					status = "disabled";
+				};
+
+				tegra_adx4: adx@2903b00 {
+					compatible = "nvidia,tegra194-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903b00 0x0 0x100>;
+					sound-name-prefix = "ADX4";
+					status = "disabled";
+				};
+
+				tegra_dmic1: dmic@2904000 {
+					compatible = "nvidia,tegra194-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904000 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DMIC1>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DMIC1>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC1";
+					status = "disabled";
+				};
+
+				tegra_dmic2: dmic@2904100 {
+					compatible = "nvidia,tegra194-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904100 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DMIC2>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DMIC2>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC2";
+					status = "disabled";
+				};
+
+				tegra_dmic3: dmic@2904200 {
+					compatible = "nvidia,tegra194-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904200 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DMIC3>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DMIC3>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC3";
+					status = "disabled";
+				};
+
+				tegra_dmic4: dmic@2904300 {
+					compatible = "nvidia,tegra194-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904300 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DMIC4>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DMIC4>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC4";
+					status = "disabled";
+				};
+
+				tegra_dspk1: dspk@2905000 {
+					compatible = "nvidia,tegra194-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905000 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DSPK1>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DSPK1>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK1";
+					status = "disabled";
+				};
+
+				tegra_dspk2: dspk@2905100 {
+					compatible = "nvidia,tegra194-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905100 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DSPK2>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DSPK2>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK2";
+					status = "disabled";
+				};
+
+				tegra_ope1: processing-engine@2908000 {
+					compatible = "nvidia,tegra194-ope",
+						     "nvidia,tegra210-ope";
+					reg = <0x0 0x2908000 0x0 0x100>;
+					sound-name-prefix = "OPE1";
+					status = "disabled";
+
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					equalizer@2908100 {
+						compatible = "nvidia,tegra194-peq",
+							     "nvidia,tegra210-peq";
+						reg = <0x0 0x2908100 0x0 0x100>;
+					};
+
+					dynamic-range-compressor@2908200 {
+						compatible = "nvidia,tegra194-mbdrc",
+							     "nvidia,tegra210-mbdrc";
+						reg = <0x0 0x2908200 0x0 0x200>;
+					};
+				};
+
+				tegra_mvc1: mvc@290a000 {
+					compatible = "nvidia,tegra194-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a000 0x0 0x200>;
+					sound-name-prefix = "MVC1";
+					status = "disabled";
+				};
+
+				tegra_mvc2: mvc@290a200 {
+					compatible = "nvidia,tegra194-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a200 0x0 0x200>;
+					sound-name-prefix = "MVC2";
+					status = "disabled";
+				};
+
+				tegra_amixer: amixer@290bb00 {
+					compatible = "nvidia,tegra194-amixer",
+						     "nvidia,tegra210-amixer";
+					reg = <0x0 0x290bb00 0x0 0x800>;
+					sound-name-prefix = "MIXER1";
+					status = "disabled";
+				};
+
+				tegra_admaif: admaif@290f000 {
+					compatible = "nvidia,tegra194-admaif",
+						     "nvidia,tegra186-admaif";
+					reg = <0x0 0x0290f000 0x0 0x1000>;
+					dmas = <&adma 1>, <&adma 1>,
+					       <&adma 2>, <&adma 2>,
+					       <&adma 3>, <&adma 3>,
+					       <&adma 4>, <&adma 4>,
+					       <&adma 5>, <&adma 5>,
+					       <&adma 6>, <&adma 6>,
+					       <&adma 7>, <&adma 7>,
+					       <&adma 8>, <&adma 8>,
+					       <&adma 9>, <&adma 9>,
+					       <&adma 10>, <&adma 10>,
+					       <&adma 11>, <&adma 11>,
+					       <&adma 12>, <&adma 12>,
+					       <&adma 13>, <&adma 13>,
+					       <&adma 14>, <&adma 14>,
+					       <&adma 15>, <&adma 15>,
+					       <&adma 16>, <&adma 16>,
+					       <&adma 17>, <&adma 17>,
+					       <&adma 18>, <&adma 18>,
+					       <&adma 19>, <&adma 19>,
+					       <&adma 20>, <&adma 20>;
+					dma-names = "rx1", "tx1",
+						    "rx2", "tx2",
+						    "rx3", "tx3",
+						    "rx4", "tx4",
+						    "rx5", "tx5",
+						    "rx6", "tx6",
+						    "rx7", "tx7",
+						    "rx8", "tx8",
+						    "rx9", "tx9",
+						    "rx10", "tx10",
+						    "rx11", "tx11",
+						    "rx12", "tx12",
+						    "rx13", "tx13",
+						    "rx14", "tx14",
+						    "rx15", "tx15",
+						    "rx16", "tx16",
+						    "rx17", "tx17",
+						    "rx18", "tx18",
+						    "rx19", "tx19",
+						    "rx20", "tx20";
+					status = "disabled";
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>;
+					interconnect-names = "dma-mem", "write";
+					iommus = <&smmu TEGRA194_SID_APE>;
+				};
+
+				tegra_asrc: asrc@2910000 {
+					compatible = "nvidia,tegra194-asrc",
+						     "nvidia,tegra186-asrc";
+					reg = <0x0 0x2910000 0x0 0x2000>;
+					sound-name-prefix = "ASRC1";
+					status = "disabled";
+				};
+			};
+
+			adma: dma-controller@2930000 {
+				compatible = "nvidia,tegra194-adma",
+					     "nvidia,tegra186-adma";
+				reg = <0x0 0x02930000 0x0 0x20000>;
+				interrupt-parent = <&agic>;
+				interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				clocks = <&bpmp TEGRA194_CLK_AHUB>;
+				clock-names = "d_audio";
+				status = "disabled";
+			};
+
+			agic: interrupt-controller@2a40000 {
+				compatible = "nvidia,tegra194-agic",
+					     "nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x02a41000 0x0 0x1000>,
+				      <0x0 0x02a42000 0x0 0x2000>;
+				interrupts = <GIC_SPI 145
+					      (GIC_CPU_MASK_SIMPLE(4) |
+					       IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA194_CLK_APE>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+		};
+
+		mc: memory-controller@2c00000 {
+			compatible = "nvidia,tegra194-mc";
+			reg = <0x0 0x02c00000 0x0 0x10000>,   /* MC-SID */
+			      <0x0 0x02c10000 0x0 0x10000>,   /* MC Broadcast*/
+			      <0x0 0x02c20000 0x0 0x10000>,   /* MC0 */
+			      <0x0 0x02c30000 0x0 0x10000>,   /* MC1 */
+			      <0x0 0x02c40000 0x0 0x10000>,   /* MC2 */
+			      <0x0 0x02c50000 0x0 0x10000>,   /* MC3 */
+			      <0x0 0x02b80000 0x0 0x10000>,   /* MC4 */
+			      <0x0 0x02b90000 0x0 0x10000>,   /* MC5 */
+			      <0x0 0x02ba0000 0x0 0x10000>,   /* MC6 */
+			      <0x0 0x02bb0000 0x0 0x10000>,   /* MC7 */
+			      <0x0 0x01700000 0x0 0x10000>,   /* MC8 */
+			      <0x0 0x01710000 0x0 0x10000>,   /* MC9 */
+			      <0x0 0x01720000 0x0 0x10000>,   /* MC10 */
+			      <0x0 0x01730000 0x0 0x10000>,   /* MC11 */
+			      <0x0 0x01740000 0x0 0x10000>,   /* MC12 */
+			      <0x0 0x01750000 0x0 0x10000>,   /* MC13 */
+			      <0x0 0x01760000 0x0 0x10000>,   /* MC14 */
+			      <0x0 0x01770000 0x0 0x10000>;   /* MC15 */
+			reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3",
+				    "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10",
+				    "ch11", "ch12", "ch13", "ch14", "ch15";
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			#interconnect-cells = <1>;
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x01700000 0x0 0x01700000 0x0 0x100000>,
+				 <0x0 0x02b80000 0x0 0x02b80000 0x0 0x040000>,
+				 <0x0 0x02c00000 0x0 0x02c00000 0x0 0x100000>;
+
+			/*
+			 * Bit 39 of addresses passing through the memory
+			 * controller selects the XBAR format used when memory
+			 * is accessed. This is used to transparently access
+			 * memory in the XBAR format used by the discrete GPU
+			 * (bit 39 set) or Tegra (bit 39 clear).
+			 *
+			 * As a consequence, the operating system must ensure
+			 * that bit 39 is never used implicitly, for example
+			 * via an I/O virtual address mapping of an IOMMU. If
+			 * devices require access to the XBAR switch, their
+			 * drivers must set this bit explicitly.
+			 *
+			 * Limit the DMA range for memory clients to [38:0].
+			 */
+			dma-ranges = <0x0 0x0 0x0 0x0 0x80 0x0>;
+
+			emc: external-memory-controller@2c60000 {
+				compatible = "nvidia,tegra194-emc";
+				reg = <0x0 0x02c60000 0x0 0x90000>,
+				      <0x0 0x01780000 0x0 0x80000>;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_EMC>;
+				clock-names = "emc";
+
+				#interconnect-cells = <0>;
+
+				nvidia,bpmp = <&bpmp>;
+			};
+		};
+
+		timer@3010000 {
+			compatible = "nvidia,tegra186-timer";
+			reg = <0x0 0x03010000 0x0 0x000e0000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		uarta: serial@3100000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03100000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTA>;
+			resets = <&bpmp TEGRA194_RESET_UARTA>;
+			status = "disabled";
+		};
+
+		uartb: serial@3110000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03110000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTB>;
+			resets = <&bpmp TEGRA194_RESET_UARTB>;
+			status = "disabled";
+		};
+
+		uartd: serial@3130000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03130000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTD>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTD>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		uarte: serial@3140000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03140000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTE>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTE>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		uartf: serial@3150000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03150000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTF>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTF>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		gen1_i2c: i2c@3160000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x03160000 0x0 0x10000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C1>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C1>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 21>, <&gpcdma 21>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uarth: serial@3170000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03170000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTH>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTH>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		cam_i2c: i2c@3180000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x03180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C3>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C3>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 23>, <&gpcdma 23>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		/* shares pads with dpaux1 */
+		dp_aux_ch1_i2c: i2c@3190000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x03190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C4>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C4>;
+			reset-names = "i2c";
+			pinctrl-0 = <&state_dpaux1_i2c>;
+			pinctrl-1 = <&state_dpaux1_off>;
+			pinctrl-names = "default", "idle";
+			dmas = <&gpcdma 26>, <&gpcdma 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		/* shares pads with dpaux0 */
+		dp_aux_ch0_i2c: i2c@31b0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x031b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C6>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C6>;
+			reset-names = "i2c";
+			pinctrl-0 = <&state_dpaux0_i2c>;
+			pinctrl-1 = <&state_dpaux0_off>;
+			pinctrl-names = "default", "idle";
+			dmas = <&gpcdma 30>, <&gpcdma 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		/* shares pads with dpaux2 */
+		dp_aux_ch2_i2c: i2c@31c0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x031c0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C7>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C7>;
+			reset-names = "i2c";
+			pinctrl-0 = <&state_dpaux2_i2c>;
+			pinctrl-1 = <&state_dpaux2_off>;
+			pinctrl-names = "default", "idle";
+			dmas = <&gpcdma 27>, <&gpcdma 27>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		/* shares pads with dpaux3 */
+		dp_aux_ch3_i2c: i2c@31e0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x031e0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C9>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C9>;
+			reset-names = "i2c";
+			pinctrl-0 = <&state_dpaux3_i2c>;
+			pinctrl-1 = <&state_dpaux3_off>;
+			pinctrl-names = "default", "idle";
+			dmas = <&gpcdma 31>, <&gpcdma 31>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi@3270000 {
+			compatible = "nvidia,tegra194-qspi";
+			reg = <0x0 0x3270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_QSPI0>,
+				 <&bpmp TEGRA194_CLK_QSPI0_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA194_RESET_QSPI0>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@3280000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x3280000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM1>;
+			resets = <&bpmp TEGRA194_RESET_PWM1>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm2: pwm@3290000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x3290000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM2>;
+			resets = <&bpmp TEGRA194_RESET_PWM2>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm3: pwm@32a0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32a0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM3>;
+			resets = <&bpmp TEGRA194_RESET_PWM3>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm5: pwm@32c0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32c0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM5>;
+			resets = <&bpmp TEGRA194_RESET_PWM5>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm6: pwm@32d0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32d0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM6>;
+			resets = <&bpmp TEGRA194_RESET_PWM6>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm7: pwm@32e0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32e0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM7>;
+			resets = <&bpmp TEGRA194_RESET_PWM7>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm8: pwm@32f0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32f0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM8>;
+			resets = <&bpmp TEGRA194_RESET_PWM8>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		spi@3300000 {
+			compatible = "nvidia,tegra194-qspi";
+			reg = <0x0 0x3300000 0x0 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_QSPI1>,
+				 <&bpmp TEGRA194_CLK_QSPI1_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA194_RESET_QSPI1>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@3400000 {
+			compatible = "nvidia,tegra194-sdhci";
+			reg = <0x0 0x03400000 0x0 0x10000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
+					  <&bpmp TEGRA194_CLK_PLLC4_MUXED>;
+			assigned-clock-parents =
+					  <&bpmp TEGRA194_CLK_PLLC4_MUXED>,
+					  <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>;
+			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_SDMMC1>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc1_3v3>;
+			pinctrl-1 = <&sdmmc1_1v8>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
+			nvidia,default-tap = <0x9>;
+			nvidia,default-trim = <0x5>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
+			status = "disabled";
+		};
+
+		sdmmc3: mmc@3440000 {
+			compatible = "nvidia,tegra194-sdhci";
+			reg = <0x0 0x03440000 0x0 0x10000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
+					  <&bpmp TEGRA194_CLK_PLLC4_MUXED>;
+			assigned-clock-parents =
+					  <&bpmp TEGRA194_CLK_PLLC4_MUXED>,
+					  <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>;
+			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_SDMMC3>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc3_3v3>;
+			pinctrl-1 = <&sdmmc3_1v8>;
+			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
+			nvidia,default-tap = <0x9>;
+			nvidia,default-trim = <0x5>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
+			status = "disabled";
+		};
+
+		sdmmc4: mmc@3460000 {
+			compatible = "nvidia,tegra194-sdhci";
+			reg = <0x0 0x03460000 0x0 0x10000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
+					  <&bpmp TEGRA194_CLK_PLLC4>;
+			assigned-clock-parents =
+					  <&bpmp TEGRA194_CLK_PLLC4>;
+			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRAB &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWAB &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_SDMMC4>;
+			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout =
+									<0x0a>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
+									<0x0a>;
+			nvidia,default-tap = <0x8>;
+			nvidia,default-trim = <0x14>;
+			nvidia,dqs-trim = <40>;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+			supports-cqe;
+			status = "disabled";
+		};
+
+		hda@3510000 {
+			compatible = "nvidia,tegra194-hda";
+			reg = <0x0 0x3510000 0x0 0x10000>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_HDA>,
+				 <&bpmp TEGRA194_CLK_HDA2HDMICODEC>,
+				 <&bpmp TEGRA194_CLK_HDA2CODEC_2X>;
+			clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+			resets = <&bpmp TEGRA194_RESET_HDA>,
+				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
+			reset-names = "hda", "hda2hdmi";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_HDA>;
+			status = "disabled";
+		};
+
+		xusb_padctl: padctl@3520000 {
+			compatible = "nvidia,tegra194-xusb-padctl";
+			reg = <0x0 0x03520000 0x0 0x1000>,
+			      <0x0 0x03540000 0x0 0x1000>;
+			reg-names = "padctl", "ao";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>;
+			reset-names = "padctl";
+
+			status = "disabled";
+
+			pads {
+				usb2 {
+					clocks = <&bpmp TEGRA194_CLK_USB2_TRK>;
+					clock-names = "trk";
+
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					status = "disabled";
+				};
+
+				usb2-1 {
+					status = "disabled";
+				};
+
+				usb2-2 {
+					status = "disabled";
+				};
+
+				usb2-3 {
+					status = "disabled";
+				};
+
+				usb3-0 {
+					status = "disabled";
+				};
+
+				usb3-1 {
+					status = "disabled";
+				};
+
+				usb3-2 {
+					status = "disabled";
+				};
+
+				usb3-3 {
+					status = "disabled";
+				};
+			};
+		};
+
+		usb@3550000 {
+			compatible = "nvidia,tegra194-xudc";
+			reg = <0x0 0x03550000 0x0 0x8000>,
+			      <0x0 0x03558000 0x0 0x1000>;
+			reg-names = "base", "fpci";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_DEV>,
+				 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_FS>;
+			clock-names = "dev", "ss", "ss_src", "fs_src";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_DEVR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_XUSB_DEVW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_XUSB_DEV>;
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBB>,
+					<&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "dev", "ss";
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb@3610000 {
+			compatible = "nvidia,tegra194-xusb";
+			reg = <0x0 0x03610000 0x0 0x40000>,
+			      <0x0 0x03600000 0x0 0x10000>;
+			reg-names = "hcd", "fpci";
+
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
+				 <&bpmp TEGRA194_CLK_XUSB_FALCON>,
+				 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_SS>,
+				 <&bpmp TEGRA194_CLK_CLK_M>,
+				 <&bpmp TEGRA194_CLK_XUSB_FS>,
+				 <&bpmp TEGRA194_CLK_UTMIPLL>,
+				 <&bpmp TEGRA194_CLK_CLK_M>,
+				 <&bpmp TEGRA194_CLK_PLLE>;
+			clock-names = "xusb_host", "xusb_falcon_src",
+				      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+				      "xusb_fs_src", "pll_u_480m", "clk_m",
+				      "pll_e";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_XUSB_HOST>;
+
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
+					<&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "xusb_host", "xusb_ss";
+
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			status = "disabled";
+		};
+
+		fuse@3820000 {
+			compatible = "nvidia,tegra194-efuse";
+			reg = <0x0 0x03820000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_FUSE>;
+			clock-names = "fuse";
+		};
+
+		gic: interrupt-controller@3881000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x03881000 0x0 0x1000>,
+			      <0x0 0x03882000 0x0 0x2000>,
+			      <0x0 0x03884000 0x0 0x2000>,
+			      <0x0 0x03886000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-parent = <&gic>;
+		};
+
+		cec@3960000 {
+			compatible = "nvidia,tegra194-cec";
+			reg = <0x0 0x03960000 0x0 0x10000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_CEC>;
+			clock-names = "cec";
+			status = "disabled";
+		};
+
+		hte_lic: hardware-timestamp@3aa0000 {
+			compatible = "nvidia,tegra194-gte-lic";
+			reg = <0x0 0x3aa0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,slices = <11>;
+			#timestamp-cells = <1>;
+			status = "okay";
+		};
+
+		hsp_top0: hsp@3c00000 {
+			compatible = "nvidia,tegra194-hsp";
+			reg = <0x0 0x03c00000 0x0 0xa0000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "doorbell", "shared0", "shared1", "shared2",
+			                  "shared3", "shared4", "shared5", "shared6",
+			                  "shared7";
+			#mbox-cells = <2>;
+		};
+
+		p2u_hsio_0: phy@3e10000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e10000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_1: phy@3e20000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e20000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_2: phy@3e30000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e30000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_3: phy@3e40000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e40000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_4: phy@3e50000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e50000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_5: phy@3e60000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e60000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_6: phy@3e70000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e70000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_7: phy@3e80000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e80000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_8: phy@3e90000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e90000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_9: phy@3ea0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ea0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_0: phy@3eb0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03eb0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_1: phy@3ec0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ec0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_2: phy@3ed0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ed0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_3: phy@3ee0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ee0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_4: phy@3ef0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ef0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_5: phy@3f00000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f00000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_6: phy@3f10000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f10000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_7: phy@3f20000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f20000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_10: phy@3f30000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f30000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_11: phy@3f40000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f40000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		sce-noc@b600000 {
+			compatible = "nvidia,tegra194-sce-noc";
+			reg = <0x0 0xb600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		rce-noc@be00000 {
+			compatible = "nvidia,tegra194-rce-noc";
+			reg = <0x0 0xbe00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		hsp_aon: hsp@c150000 {
+			compatible = "nvidia,tegra194-hsp";
+			reg = <0x0 0x0c150000 0x0 0x90000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * Shared interrupt 0 is routed only to AON/SPE, so
+			 * we only have 4 shared interrupts for the CCPLEX.
+			 */
+			interrupt-names = "shared1", "shared2", "shared3", "shared4";
+			#mbox-cells = <2>;
+		};
+
+		hte_aon: hardware-timestamp@c1e0000 {
+			compatible = "nvidia,tegra194-gte-aon";
+			reg = <0x0 0xc1e0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,slices = <3>;
+			#timestamp-cells = <1>;
+			status = "okay";
+		};
+
+		gen2_i2c: i2c@c240000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x0c240000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C2>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C2>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 22>, <&gpcdma 22>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		gen8_i2c: i2c@c250000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x0c250000 0x0 0x10000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C8>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C8>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 0>, <&gpcdma 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uartc: serial@c280000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x0c280000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTC>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTC>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		uartg: serial@c290000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x0c290000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTG>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTG>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		rtc: rtc@c2a0000 {
+			compatible = "nvidia,tegra194-rtc", "nvidia,tegra20-rtc";
+			reg = <0x0 0x0c2a0000 0x0 0x10000>;
+			interrupt-parent = <&pmc>;
+			interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_CLK_32K>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		gpio_aon: gpio@c2f0000 {
+			compatible = "nvidia,tegra194-gpio-aon";
+			reg-names = "security", "gpio";
+			reg = <0x0 0xc2f0000 0x0 0x1000>,
+			      <0x0 0xc2f1000 0x0 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pinmux_aon 0 0 30>;
+		};
+
+		pinmux_aon: pinmux@c300000 {
+			compatible = "nvidia,tegra194-pinmux-aon";
+			reg = <0x0 0xc300000 0x0 0x4000>;
+
+			status = "okay";
+		};
+
+		pwm4: pwm@c340000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0xc340000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM4>;
+			resets = <&bpmp TEGRA194_RESET_PWM4>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pmc: pmc@c360000 {
+			compatible = "nvidia,tegra194-pmc";
+			reg = <0x0 0x0c360000 0x0 0x10000>,
+			      <0x0 0x0c370000 0x0 0x10000>,
+			      <0x0 0x0c380000 0x0 0x10000>,
+			      <0x0 0x0c390000 0x0 0x10000>,
+			      <0x0 0x0c3a0000 0x0 0x10000>;
+			reg-names = "pmc", "wake", "aotag", "scratch", "misc";
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+		};
+
+		aon-noc@c600000 {
+			compatible = "nvidia,tegra194-aon-noc";
+			reg = <0x0 0xc600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		bpmp-noc@d600000 {
+			compatible = "nvidia,tegra194-bpmp-noc";
+			reg = <0x0 0xd600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		iommu@10000000 {
+			compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x10000000 0x0 0x800000>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "disabled";
+		};
+
+		smmu: iommu@12000000 {
+			compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x12000000 0x0 0x800000>,
+			      <0x0 0x11000000 0x0 0x800000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			compatible = "nvidia,tegra194-host1x";
+			reg = <0x0 0x13e00000 0x0 0x10000>,
+			      <0x0 0x13e10000 0x0 0x10000>;
+			reg-names = "hypervisor", "vm";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "syncpt", "host1x";
+			clocks = <&bpmp TEGRA194_CLK_HOST1X>;
+			clock-names = "host1x";
+			resets = <&bpmp TEGRA194_RESET_HOST1X>;
+			reset-names = "host1x";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x14800000 0x0 0x14800000 0x0 0x02800000>;
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>;
+			interconnect-names = "dma-mem";
+			iommus = <&smmu TEGRA194_SID_HOST1X>;
+			dma-coherent;
+
+			/* Context isolation domains */
+			iommu-map = <0 &smmu TEGRA194_SID_HOST1X_CTX0 1>,
+				    <1 &smmu TEGRA194_SID_HOST1X_CTX1 1>,
+				    <2 &smmu TEGRA194_SID_HOST1X_CTX2 1>,
+				    <3 &smmu TEGRA194_SID_HOST1X_CTX3 1>,
+				    <4 &smmu TEGRA194_SID_HOST1X_CTX4 1>,
+				    <5 &smmu TEGRA194_SID_HOST1X_CTX5 1>,
+				    <6 &smmu TEGRA194_SID_HOST1X_CTX6 1>,
+				    <7 &smmu TEGRA194_SID_HOST1X_CTX7 1>;
+
+			nvdec@15140000 {
+				compatible = "nvidia,tegra194-nvdec";
+				reg = <0x0 0x15140000 0x0 0x00040000>;
+				clocks = <&bpmp TEGRA194_CLK_NVDEC1>;
+				clock-names = "nvdec";
+				resets = <&bpmp TEGRA194_RESET_NVDEC1>;
+				reset-names = "nvdec";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVDECB>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDEC1SRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVDEC1SRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVDEC1SWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVDEC1>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0xf5>;
+			};
+
+			display-hub@15200000 {
+				compatible = "nvidia,tegra194-display";
+				reg = <0x0 0x15200000 0x0 0x00040000>;
+				resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+				reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+					      "wgrp3", "wgrp4", "wgrp5";
+				clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+					 <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+				clock-names = "disp", "hub";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x15200000 0x0 0x15200000 0x0 0x40000>;
+
+				display@15200000 {
+					compatible = "nvidia,tegra194-dc";
+					reg = <0x0 0x15200000 0x0 0x10000>;
+					interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+					clock-names = "dc";
+					resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+					reset-names = "dc";
+
+					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
+
+					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+					nvidia,head = <0>;
+				};
+
+				display@15210000 {
+					compatible = "nvidia,tegra194-dc";
+					reg = <0x0 0x15210000 0x0 0x10000>;
+					interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+					clock-names = "dc";
+					resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+					reset-names = "dc";
+
+					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
+
+					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+					nvidia,head = <1>;
+				};
+
+				display@15220000 {
+					compatible = "nvidia,tegra194-dc";
+					reg = <0x0 0x15220000 0x0 0x10000>;
+					interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+					clock-names = "dc";
+					resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+					reset-names = "dc";
+
+					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
+
+					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+					nvidia,head = <2>;
+				};
+
+				display@15230000 {
+					compatible = "nvidia,tegra194-dc";
+					reg = <0x0 0x15230000 0x0 0x10000>;
+					interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+					clock-names = "dc";
+					resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+					reset-names = "dc";
+
+					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
+
+					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+					nvidia,head = <3>;
+				};
+			};
+
+			vic@15340000 {
+				compatible = "nvidia,tegra194-vic";
+				reg = <0x0 0x15340000 0x0 0x00040000>;
+				interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_VIC>;
+				clock-names = "vic";
+				resets = <&bpmp TEGRA194_RESET_VIC>;
+				reset-names = "vic";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_VIC>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_VICSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_VICSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu TEGRA194_SID_VIC>;
+				dma-coherent;
+			};
+
+			nvjpg@15380000 {
+				compatible = "nvidia,tegra194-nvjpg";
+				reg = <0x0 0x15380000 0x0 0x40000>;
+				clocks = <&bpmp TEGRA194_CLK_NVJPG>;
+				clock-names = "nvjpg";
+				resets = <&bpmp TEGRA194_RESET_NVJPG>;
+				reset-names = "nvjpg";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVJPG>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVJPGSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVJPGSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu TEGRA194_SID_NVJPG>;
+				dma-coherent;
+			};
+
+			nvdec@15480000 {
+				compatible = "nvidia,tegra194-nvdec";
+				reg = <0x0 0x15480000 0x0 0x00040000>;
+				clocks = <&bpmp TEGRA194_CLK_NVDEC>;
+				clock-names = "nvdec";
+				resets = <&bpmp TEGRA194_RESET_NVDEC>;
+				reset-names = "nvdec";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVDECA>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDECSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVDECSRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVDECSWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVDEC>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0xf0>;
+			};
+
+			nvenc@154c0000 {
+				compatible = "nvidia,tegra194-nvenc";
+				reg = <0x0 0x154c0000 0x0 0x40000>;
+				clocks = <&bpmp TEGRA194_CLK_NVENC>;
+				clock-names = "nvenc";
+				resets = <&bpmp TEGRA194_RESET_NVENC>;
+				reset-names = "nvenc";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVENCA>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVENCSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENCSRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENCSWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVENC>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0x21>;
+			};
+
+			dpaux0: dpaux@155c0000 {
+				compatible = "nvidia,tegra194-dpaux";
+				reg = <0x0 0x155c0000 0x0 0x10000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_DPAUX>,
+					 <&bpmp TEGRA194_CLK_PLLDP>;
+				clock-names = "dpaux", "parent";
+				resets = <&bpmp TEGRA194_RESET_DPAUX>;
+				reset-names = "dpaux";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				state_dpaux0_aux: pinmux-aux {
+					groups = "dpaux-io";
+					function = "aux";
+				};
+
+				state_dpaux0_i2c: pinmux-i2c {
+					groups = "dpaux-io";
+					function = "i2c";
+				};
+
+				state_dpaux0_off: pinmux-off {
+					groups = "dpaux-io";
+					function = "off";
+				};
+
+				i2c-bus {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			dpaux1: dpaux@155d0000 {
+				compatible = "nvidia,tegra194-dpaux";
+				reg = <0x0 0x155d0000 0x0 0x10000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_DPAUX1>,
+					 <&bpmp TEGRA194_CLK_PLLDP>;
+				clock-names = "dpaux", "parent";
+				resets = <&bpmp TEGRA194_RESET_DPAUX1>;
+				reset-names = "dpaux";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				state_dpaux1_aux: pinmux-aux {
+					groups = "dpaux-io";
+					function = "aux";
+				};
+
+				state_dpaux1_i2c: pinmux-i2c {
+					groups = "dpaux-io";
+					function = "i2c";
+				};
+
+				state_dpaux1_off: pinmux-off {
+					groups = "dpaux-io";
+					function = "off";
+				};
+
+				i2c-bus {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			dpaux2: dpaux@155e0000 {
+				compatible = "nvidia,tegra194-dpaux";
+				reg = <0x0 0x155e0000 0x0 0x10000>;
+				interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_DPAUX2>,
+					 <&bpmp TEGRA194_CLK_PLLDP>;
+				clock-names = "dpaux", "parent";
+				resets = <&bpmp TEGRA194_RESET_DPAUX2>;
+				reset-names = "dpaux";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				state_dpaux2_aux: pinmux-aux {
+					groups = "dpaux-io";
+					function = "aux";
+				};
+
+				state_dpaux2_i2c: pinmux-i2c {
+					groups = "dpaux-io";
+					function = "i2c";
+				};
+
+				state_dpaux2_off: pinmux-off {
+					groups = "dpaux-io";
+					function = "off";
+				};
+
+				i2c-bus {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			dpaux3: dpaux@155f0000 {
+				compatible = "nvidia,tegra194-dpaux";
+				reg = <0x0 0x155f0000 0x0 0x10000>;
+				interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_DPAUX3>,
+					 <&bpmp TEGRA194_CLK_PLLDP>;
+				clock-names = "dpaux", "parent";
+				resets = <&bpmp TEGRA194_RESET_DPAUX3>;
+				reset-names = "dpaux";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				state_dpaux3_aux: pinmux-aux {
+					groups = "dpaux-io";
+					function = "aux";
+				};
+
+				state_dpaux3_i2c: pinmux-i2c {
+					groups = "dpaux-io";
+					function = "i2c";
+				};
+
+				state_dpaux3_off: pinmux-off {
+					groups = "dpaux-io";
+					function = "off";
+				};
+
+				i2c-bus {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			nvenc@15a80000 {
+				compatible = "nvidia,tegra194-nvenc";
+				reg = <0x0 0x15a80000 0x0 0x00040000>;
+				clocks = <&bpmp TEGRA194_CLK_NVENC1>;
+				clock-names = "nvenc";
+				resets = <&bpmp TEGRA194_RESET_NVENC1>;
+				reset-names = "nvenc";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVENCB>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVENC1SRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENC1SRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENC1SWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVENC1>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0x22>;
+			};
+
+			sor0: sor@15b00000 {
+				compatible = "nvidia,tegra194-sor";
+				reg = <0x0 0x15b00000 0x0 0x40000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_SOR0_REF>,
+					 <&bpmp TEGRA194_CLK_SOR0_OUT>,
+					 <&bpmp TEGRA194_CLK_PLLD>,
+					 <&bpmp TEGRA194_CLK_PLLDP>,
+					 <&bpmp TEGRA194_CLK_SOR_SAFE>,
+					 <&bpmp TEGRA194_CLK_SOR0_PAD_CLKOUT>;
+				clock-names = "sor", "out", "parent", "dp", "safe",
+					      "pad";
+				resets = <&bpmp TEGRA194_RESET_SOR0>;
+				reset-names = "sor";
+				pinctrl-0 = <&state_dpaux0_aux>;
+				pinctrl-1 = <&state_dpaux0_i2c>;
+				pinctrl-2 = <&state_dpaux0_off>;
+				pinctrl-names = "aux", "i2c", "off";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+				nvidia,interface = <0>;
+			};
+
+			sor1: sor@15b40000 {
+				compatible = "nvidia,tegra194-sor";
+				reg = <0x0 0x15b40000 0x0 0x40000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_SOR1_REF>,
+					 <&bpmp TEGRA194_CLK_SOR1_OUT>,
+					 <&bpmp TEGRA194_CLK_PLLD2>,
+					 <&bpmp TEGRA194_CLK_PLLDP>,
+					 <&bpmp TEGRA194_CLK_SOR_SAFE>,
+					 <&bpmp TEGRA194_CLK_SOR1_PAD_CLKOUT>;
+				clock-names = "sor", "out", "parent", "dp", "safe",
+					      "pad";
+				resets = <&bpmp TEGRA194_RESET_SOR1>;
+				reset-names = "sor";
+				pinctrl-0 = <&state_dpaux1_aux>;
+				pinctrl-1 = <&state_dpaux1_i2c>;
+				pinctrl-2 = <&state_dpaux1_off>;
+				pinctrl-names = "aux", "i2c", "off";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+				nvidia,interface = <1>;
+			};
+
+			sor2: sor@15b80000 {
+				compatible = "nvidia,tegra194-sor";
+				reg = <0x0 0x15b80000 0x0 0x40000>;
+				interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_SOR2_REF>,
+					 <&bpmp TEGRA194_CLK_SOR2_OUT>,
+					 <&bpmp TEGRA194_CLK_PLLD3>,
+					 <&bpmp TEGRA194_CLK_PLLDP>,
+					 <&bpmp TEGRA194_CLK_SOR_SAFE>,
+					 <&bpmp TEGRA194_CLK_SOR2_PAD_CLKOUT>;
+				clock-names = "sor", "out", "parent", "dp", "safe",
+					      "pad";
+				resets = <&bpmp TEGRA194_RESET_SOR2>;
+				reset-names = "sor";
+				pinctrl-0 = <&state_dpaux2_aux>;
+				pinctrl-1 = <&state_dpaux2_i2c>;
+				pinctrl-2 = <&state_dpaux2_off>;
+				pinctrl-names = "aux", "i2c", "off";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+				nvidia,interface = <2>;
+			};
+
+			sor3: sor@15bc0000 {
+				compatible = "nvidia,tegra194-sor";
+				reg = <0x0 0x15bc0000 0x0 0x40000>;
+				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_SOR3_REF>,
+					 <&bpmp TEGRA194_CLK_SOR3_OUT>,
+					 <&bpmp TEGRA194_CLK_PLLD4>,
+					 <&bpmp TEGRA194_CLK_PLLDP>,
+					 <&bpmp TEGRA194_CLK_SOR_SAFE>,
+					 <&bpmp TEGRA194_CLK_SOR3_PAD_CLKOUT>;
+				clock-names = "sor", "out", "parent", "dp", "safe",
+					      "pad";
+				resets = <&bpmp TEGRA194_RESET_SOR3>;
+				reset-names = "sor";
+				pinctrl-0 = <&state_dpaux3_aux>;
+				pinctrl-1 = <&state_dpaux3_i2c>;
+				pinctrl-2 = <&state_dpaux3_off>;
+				pinctrl-names = "aux", "i2c", "off";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+				nvidia,interface = <3>;
+			};
+		};
+
+		pcie@14100000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			linux,pci-domain = <1>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_1>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_1_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_1>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 1>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+				 <0x02000000 0x0  0x40000000 0x12 0x30000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x12 0x3fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE1 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@14120000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			linux,pci-domain = <2>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_2>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_2_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_2>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 2>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+				 <0x02000000 0x0  0x40000000 0x12 0x70000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x12 0x7fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE2 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@14140000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			linux,pci-domain = <3>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_3>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_3_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_3>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 3>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+				 <0x02000000 0x0  0x40000000 0x12 0xb0000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB + 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x12 0xbfff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE3 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@14160000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+			reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			linux,pci-domain = <4>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 4>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+				 <0x02000000 0x0  0x40000000 0x17 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x17 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie-ep@14160000 {
+			compatible = "nvidia,tegra194-pcie-ep";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+			reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			status = "disabled";
+
+			num-lanes = <4>;
+			num-ib-windows = <2>;
+			num-ob-windows = <8>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 4>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@14180000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+			reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			linux,pci-domain = <0>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 0>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+				 <0x02000000 0x0  0x40000000 0x1b 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x1b 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie-ep@14180000 {
+			compatible = "nvidia,tegra194-pcie-ep";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+			reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			status = "disabled";
+
+			num-lanes = <8>;
+			num-ib-windows = <2>;
+			num-ob-windows = <8>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 0>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@141a0000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+			reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			linux,pci-domain = <5>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pex_rst_c5_out_state>, <&pex_clkreq_c5_bi_dir_state>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+				 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			nvidia,bpmp = <&bpmp 5>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+				 <0x02000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x1f 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie-ep@141a0000 {
+			compatible = "nvidia,tegra194-pcie-ep";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+			reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			status = "disabled";
+
+			num-lanes = <8>;
+			num-ib-windows = <2>;
+			num-ob-windows = <8>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pex_clkreq_c5_bi_dir_state>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+				 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 5>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		gpu@17000000 {
+			compatible = "nvidia,gv11b";
+			reg = <0x0 0x17000000 0x0 0x1000000>,
+			      <0x0 0x18000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "stall", "nonstall";
+			clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
+				 <&bpmp TEGRA194_CLK_GPU_PWR>,
+				 <&bpmp TEGRA194_CLK_FUSE>;
+			clock-names = "gpu", "pwr", "fuse";
+			resets = <&bpmp TEGRA194_RESET_GPU>;
+			reset-names = "gpu";
+			dma-coherent;
+
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVL1R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL1RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL1W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4W &emc>;
+			interconnect-names = "dma-mem", "read-0-hp", "write-0",
+					     "read-1", "read-1-hp", "write-1",
+					     "read-2", "read-2-hp", "write-2",
+					     "read-3", "read-3-hp", "write-3";
+		};
+	};
+
+	sram@40000000 {
+		compatible = "nvidia,tegra194-sysram", "mmio-sram";
+		reg = <0x0 0x40000000 0x0 0x50000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40000000 0x50000>;
+
+		no-memory-wc;
+
+		cpu_bpmp_tx: sram@4e000 {
+			reg = <0x4e000 0x1000>;
+			label = "cpu-bpmp-tx";
+			pool;
+		};
+
+		cpu_bpmp_rx: sram@4f000 {
+			reg = <0x4f000 0x1000>;
+			label = "cpu-bpmp-rx";
+			pool;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra186-bpmp";
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+				    TEGRA_HSP_DB_MASTER_BPMP>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
+		iommus = <&smmu TEGRA194_SID_BPMP>;
+
+		bpmp_i2c: i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		bpmp_thermal: thermal {
+			compatible = "nvidia,tegra186-bpmp-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	cpus {
+		compatible = "nvidia,tegra194-ccplex";
+		nvidia,bpmp = <&bpmp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0_0: cpu@0 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x000>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_0>;
+		};
+
+		cpu0_1: cpu@1 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x001>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_0>;
+		};
+
+		cpu1_0: cpu@100 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_1>;
+		};
+
+		cpu1_1: cpu@101 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x101>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_1>;
+		};
+
+		cpu2_0: cpu@200 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_2>;
+		};
+
+		cpu2_1: cpu@201 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x201>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_2>;
+		};
+
+		cpu3_0: cpu@300 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_3>;
+		};
+
+		cpu3_1: cpu@301 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x301>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_3>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0_0>;
+				};
+
+				core1 {
+					cpu = <&cpu0_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu1_0>;
+				};
+
+				core1 {
+					cpu = <&cpu1_1>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu2_0>;
+				};
+
+				core1 {
+					cpu = <&cpu2_1>;
+				};
+			};
+
+			cluster3 {
+				core0 {
+					cpu = <&cpu3_0>;
+				};
+
+				core1 {
+					cpu = <&cpu3_1>;
+				};
+			};
+		};
+
+		l2c_0: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			next-level-cache = <&l3c>;
+		};
+
+		l2c_1: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			next-level-cache = <&l3c>;
+		};
+
+		l2c_2: l2-cache2 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			next-level-cache = <&l3c>;
+		};
+
+		l2c_3: l2-cache3 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			next-level-cache = <&l3c>;
+		};
+
+		l3c: l3-cache {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <4194304>;
+			cache-line-size = <64>;
+			cache-level = <3>;
+			cache-sets = <4096>;
+		};
+	};
+
+	pmu {
+		compatible = "nvidia,carmel-pmu";
+		interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0_0 &cpu0_1 &cpu1_0 &cpu1_1
+				      &cpu2_0 &cpu2_1 &cpu3_0 &cpu3_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	tcu: serial {
+		compatible = "nvidia,tegra194-tcu";
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>,
+			 <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>;
+		mbox-names = "rx", "tx";
+	};
+
+	sound {
+		status = "disabled";
+
+		clocks = <&bpmp TEGRA194_CLK_PLLA>,
+			 <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+		clock-names = "pll_a", "plla_out0";
+		assigned-clocks = <&bpmp TEGRA194_CLK_PLLA>,
+				  <&bpmp TEGRA194_CLK_PLLA_OUT0>,
+				  <&bpmp TEGRA194_CLK_AUD_MCLK>;
+		assigned-clock-parents = <0>,
+					 <&bpmp TEGRA194_CLK_PLLA>,
+					 <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+		/*
+		 * PLLA supports dynamic ramp. Below initial rate is chosen
+		 * for this to work and oscillate between base rates required
+		 * for 8x and 11.025x sample rate streams.
+		 */
+		assigned-clock-rates = <258000000>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_CPU>;
+			status = "disabled";
+		};
+
+		gpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_GPU>;
+			status = "disabled";
+		};
+
+		aux-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_AUX>;
+			status = "disabled";
+		};
+
+		pllx-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_PLLX>;
+			status = "disabled";
+		};
+
+		ao-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_AO>;
+			status = "disabled";
+		};
+
+		tj-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+		always-on;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
new file mode 100644
index 0000000000..0ae5a44f7d
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/mfd/max77620.h>
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX1";
+	compatible = "nvidia,p2180", "nvidia,tegra210";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/pmic@3c";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	gpu@57000000 {
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	/* debug port */
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+
+		/* module ID EEPROM */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+
+			label = "module";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupt-parent = <&tegra_pmc>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+					maxim,suspend-fps-time-period-us = <1280>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,suspend-fps-time-period-us = <1280>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			max77620_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "fps-out";
+					drive-push-pull = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				gpio2_3 {
+					pins = "gpio2", "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6_7 {
+					pins = "gpio5", "gpio6", "gpio7";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&vdd_pre>;
+				in-ldo7-8-supply = <&vdd_pre>;
+				in-sd3-supply = <&vdd_5v0_sys>;
+
+				vdd_soc: sd0 {
+					regulator-name = "VDD_SOC";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <146>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_ddr: sd1 {
+					regulator-name = "VDD_DDR_1V1_PMIC";
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <130>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_pre: sd2 {
+					regulator-name = "VDD_PRE_REG_1V35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+
+					regulator-enable-ramp-delay = <176>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_1v8: sd3 {
+					regulator-name = "VDD_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <242>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_sys_1v2: ldo0 {
+					regulator-name = "AVDD_SYS_1V2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_pex_1v05: ldo1 {
+					regulator-name = "VDD_PEX_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vddio_sdmmc: ldo2 {
+					regulator-name = "VDDIO_SDMMC";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_cam_hv: ldo3 {
+					regulator-name = "VDD_CAM_HV";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-enable-ramp-delay = <50>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_rtc: ldo4 {
+					regulator-name = "VDD_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_ts_hv: ldo5 {
+					regulator-name = "VDD_TS_HV";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_ts: ldo6 {
+					regulator-name = "VDD_TS_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+
+					regulator-enable-ramp-delay = <36>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				avdd_1v05_pll: ldo7 {
+					regulator-name = "AVDD_1V05_PLL";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				avdd_1v05: ldo8 {
+					regulator-name = "AVDD_SATA_HDMI_DP_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <0>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <4587 3876>;
+		nvidia,core-pwr-off-time = <39065>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vqmmc-supply = <&vdd_1v8>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		idle-states {
+			cpu-sleep {
+				status = "okay";
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	vdd_gpu: regulator-vdd-gpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm 1 8000>;
+		regulator-name = "VDD_GPU";
+		regulator-min-microvolt = <710000>;
+		regulator-max-microvolt = <1320000>;
+		enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		regulator-ramp-delay = <80>;
+		regulator-enable-ramp-delay = <2000>;
+		regulator-settling-time-us = <160>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts
new file mode 100644
index 0000000000..21c6d3749b
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra210-p2530.dtsi"
+#include "tegra210-p2595.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2371 (P2530/P2595) reference design";
+	compatible = "nvidia,p2371-0000", "nvidia,tegra210";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
new file mode 100644
index 0000000000..a6a58e5182
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -0,0 +1,1384 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra210-p2180.dtsi"
+#include "tegra210-p2597.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX1 Developer Kit";
+	compatible = "nvidia,p2371-2180", "nvidia,tegra210";
+
+	pcie@1003000 {
+		status = "okay";
+
+		hvddio-pex-supply = <&vdd_1v8>;
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		vddio-pex-ctl-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+			status = "okay";
+		};
+
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+
+			panel@0 {
+				compatible = "auo,b080uan01";
+				reg = <0>;
+
+				enable-gpios = <&gpio TEGRA_GPIO(V, 2)
+						GPIO_ACTIVE_HIGH>;
+				power-supply = <&vdd_5v0_io>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		backlight: backlight@2c {
+			compatible = "ti,lp8557";
+			reg = <0x2c>;
+			power-supply = <&vdd_3v3_sys>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0xff>;
+
+			pwms = <&pwm 0 29334>;
+			pwm-names = "lp8557";
+
+			/* boost frequency 1 MHz */
+			rom-13h {
+				rom-addr = /bits/ 8 <0x13>;
+				rom-val = /bits/ 8 <0x01>;
+			};
+
+			/* 3 LED string */
+			rom-14h {
+				rom-addr = /bits/ 8 <0x14>;
+				rom-val = /bits/ 8 <0x87>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		/* carrier board ID EEPROM */
+		eeprom@57 {
+			compatible = "atmel,24c02";
+			reg = <0x57>;
+
+			label = "system";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	clock@70110000 {
+		status = "okay";
+
+		nvidia,cf = <6>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,sample-rate = <25000>;
+
+		nvidia,pwm-min-microvolts = <708000>;
+		nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+		nvidia,pwm-to-pmic;
+		nvidia,pwm-tristate-microvolts = <1000000>;
+		nvidia,pwm-voltage-step-microvolts = <19200>;
+
+		pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+		pinctrl-0 = <&dvfs_pwm_active_state>;
+		pinctrl-1 = <&dvfs_pwm_inactive_state>;
+	};
+
+	aconnect@702c0000 {
+		status = "okay";
+
+		ahub@702d0800 {
+			status = "okay";
+
+			admaif@702d0000 {
+				status = "okay";
+			};
+
+			i2s@702d1000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s1_ep>;
+						};
+					};
+
+					i2s1_port: port@1 {
+						reg = <1>;
+
+						i2s1_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s2_ep>;
+						};
+					};
+
+					i2s2_port: port@1 {
+						reg = <1>;
+
+						i2s2_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s3_ep>;
+						};
+					};
+
+					i2s3_port: port@1 {
+						reg = <1>;
+
+						i2s3_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1300 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s4_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s4_ep>;
+						};
+					};
+
+					i2s4_port: port@1 {
+						reg = <1>;
+
+						i2s4_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s5_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s5_ep>;
+						};
+					};
+
+					i2s5_port: port@1 {
+						reg = <1>;
+
+						i2s5_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			sfc@702d2000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_in_ep>;
+						};
+					};
+
+					sfc1_out_port: port@1 {
+						reg = <1>;
+
+						sfc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_in_ep>;
+						};
+					};
+
+					sfc2_out_port: port@1 {
+						reg = <1>;
+
+						sfc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc3_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_in_ep>;
+						};
+					};
+
+					sfc3_out_port: port@1 {
+						reg = <1>;
+
+						sfc3_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2600 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc4_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_in_ep>;
+						};
+					};
+
+					sfc4_out_port: port@1 {
+						reg = <1>;
+
+						sfc4_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@702d3000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx1_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx1_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx1_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx1_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in4_ep>;
+						};
+					};
+
+					amx1_out_port: port@4 {
+						reg = <4>;
+
+						amx1_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@702d3100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx2_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx2_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in2_ep>;
+						};
+					};
+
+					amx2_in3_port: port@2 {
+						reg = <2>;
+
+						amx2_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in3_ep>;
+						};
+					};
+
+					amx2_in4_port: port@3 {
+						reg = <3>;
+
+						amx2_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in4_ep>;
+						};
+					};
+
+					amx2_out_port: port@4 {
+						reg = <4>;
+
+						amx2_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_out_ep>;
+						};
+					};
+				};
+			};
+
+			adx@702d3800 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx1_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_in_ep>;
+						};
+					};
+
+					adx1_out1_port: port@1 {
+						reg = <1>;
+
+						adx1_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out1_ep>;
+						};
+					};
+
+					adx1_out2_port: port@2 {
+						reg = <2>;
+
+						adx1_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out2_ep>;
+						};
+					};
+
+					adx1_out3_port: port@3 {
+						reg = <3>;
+
+						adx1_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out3_ep>;
+						};
+					};
+
+					adx1_out4_port: port@4 {
+						reg = <4>;
+
+						adx1_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@702d3900 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx2_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_in_ep>;
+						};
+					};
+
+					adx2_out1_port: port@1 {
+						reg = <1>;
+
+						adx2_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out1_ep>;
+						};
+					};
+
+					adx2_out2_port: port@2 {
+						reg = <2>;
+
+						adx2_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out2_ep>;
+						};
+					};
+
+					adx2_out3_port: port@3 {
+						reg = <3>;
+
+						adx2_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out3_ep>;
+						};
+					};
+
+					adx2_out4_port: port@4 {
+						reg = <4>;
+
+						adx2_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out4_ep>;
+						};
+					};
+				};
+			};
+
+			dmic@702d4000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@702d4100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@702d4200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic3_ep>;
+						};
+					};
+
+					dmic3_port: port@1 {
+						reg = <1>;
+
+						dmic3_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			processing-engine@702d8000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_in_ep>;
+						};
+					};
+
+					ope1_out_port: port@1 {
+						reg = <0x1>;
+
+						ope1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_out_ep>;
+						};
+					};
+				};
+			};
+
+			processing-engine@702d8400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope2_in_ep>;
+						};
+					};
+
+					ope2_out_port: port@1 {
+						reg = <0x1>;
+
+						ope2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope2_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@702da000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_in_ep>;
+						};
+					};
+
+					mvc1_out_port: port@1 {
+						reg = <1>;
+
+						mvc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@702da200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_in_ep>;
+						};
+					};
+
+					mvc2_out_port: port@1 {
+						reg = <1>;
+
+						mvc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			amixer@702dbb00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						mixer_in1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						mixer_in2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						mixer_in3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						mixer_in4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in4_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						mixer_in5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in5_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						mixer_in6_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in6_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						mixer_in7_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in7_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						mixer_in8_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in8_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						mixer_in9_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in9_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						mixer_in10_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in10_ep>;
+						};
+					};
+
+					mixer_out1_port: port@a {
+						reg = <0xa>;
+
+						mixer_out1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out1_ep>;
+						};
+					};
+
+					mixer_out2_port: port@b {
+						reg = <0xb>;
+
+						mixer_out2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out2_ep>;
+						};
+					};
+
+					mixer_out3_port: port@c {
+						reg = <0xc>;
+
+						mixer_out3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out3_ep>;
+						};
+					};
+
+					mixer_out4_port: port@d {
+						reg = <0xd>;
+
+						mixer_out4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out4_ep>;
+						};
+					};
+
+					mixer_out5_port: port@e {
+						reg = <0xe>;
+
+						mixer_out5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out5_ep>;
+						};
+					};
+				};
+			};
+
+			ports {
+				xbar_i2s1_port: port@a {
+					reg = <0xa>;
+
+					xbar_i2s1_ep: endpoint {
+						remote-endpoint = <&i2s1_cif_ep>;
+					};
+				};
+
+				xbar_i2s2_port: port@b {
+					reg = <0xb>;
+
+					xbar_i2s2_ep: endpoint {
+						remote-endpoint = <&i2s2_cif_ep>;
+					};
+				};
+
+				xbar_i2s3_port: port@c {
+					reg = <0xc>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_i2s4_port: port@d {
+					reg = <0xd>;
+
+					xbar_i2s4_ep: endpoint {
+						remote-endpoint = <&i2s4_cif_ep>;
+					};
+				};
+
+				xbar_i2s5_port: port@e {
+					reg = <0xe>;
+
+					xbar_i2s5_ep: endpoint {
+						remote-endpoint = <&i2s5_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@f {
+					reg = <0xf>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@10 {
+					reg = <0x10>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+
+				xbar_dmic3_port: port@11 {
+					reg = <0x11>;
+
+					xbar_dmic3_ep: endpoint {
+						remote-endpoint = <&dmic3_cif_ep>;
+					};
+				};
+
+				xbar_sfc1_in_port: port@12 {
+					reg = <0x12>;
+
+					xbar_sfc1_in_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_in_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_sfc1_out_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc2_in_port: port@14 {
+					reg = <0x14>;
+
+					xbar_sfc2_in_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_in_ep>;
+					};
+				};
+
+				port@15 {
+					reg = <0x15>;
+
+					xbar_sfc2_out_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc3_in_port: port@16 {
+					reg = <0x16>;
+
+					xbar_sfc3_in_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_in_ep>;
+					};
+				};
+
+				port@17 {
+					reg = <0x17>;
+
+					xbar_sfc3_out_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc4_in_port: port@18 {
+					reg = <0x18>;
+
+					xbar_sfc4_in_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_in_ep>;
+					};
+				};
+
+				port@19 {
+					reg = <0x19>;
+
+					xbar_sfc4_out_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc1_in_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_mvc1_in_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_in_ep>;
+					};
+				};
+
+				port@1b {
+					reg = <0x1b>;
+
+					xbar_mvc1_out_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc2_in_port: port@1c {
+					reg = <0x1c>;
+
+					xbar_mvc2_in_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_in_ep>;
+					};
+				};
+
+				port@1d {
+					reg = <0x1d>;
+
+					xbar_mvc2_out_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_out_ep>;
+					};
+				};
+
+				xbar_amx1_in1_port: port@1e {
+					reg = <0x1e>;
+
+					xbar_amx1_in1_ep: endpoint {
+						remote-endpoint = <&amx1_in1_ep>;
+					};
+				};
+
+				xbar_amx1_in2_port: port@1f {
+					reg = <0x1f>;
+
+					xbar_amx1_in2_ep: endpoint {
+						remote-endpoint = <&amx1_in2_ep>;
+					};
+				};
+
+				xbar_amx1_in3_port: port@20 {
+					reg = <0x20>;
+
+					xbar_amx1_in3_ep: endpoint {
+						remote-endpoint = <&amx1_in3_ep>;
+					};
+				};
+
+				xbar_amx1_in4_port: port@21 {
+					reg = <0x21>;
+
+					xbar_amx1_in4_ep: endpoint {
+						remote-endpoint = <&amx1_in4_ep>;
+					};
+				};
+
+				port@22 {
+					reg = <0x22>;
+
+					xbar_amx1_out_ep: endpoint {
+						remote-endpoint = <&amx1_out_ep>;
+					};
+				};
+
+				xbar_amx2_in1_port: port@23 {
+					reg = <0x23>;
+
+					xbar_amx2_in1_ep: endpoint {
+						remote-endpoint = <&amx2_in1_ep>;
+					};
+				};
+
+				xbar_amx2_in2_port: port@24 {
+					reg = <0x24>;
+
+					xbar_amx2_in2_ep: endpoint {
+						remote-endpoint = <&amx2_in2_ep>;
+					};
+				};
+
+				xbar_amx2_in3_port: port@25 {
+					reg = <0x25>;
+
+					xbar_amx2_in3_ep: endpoint {
+						remote-endpoint = <&amx2_in3_ep>;
+					};
+				};
+
+				xbar_amx2_in4_port: port@26 {
+					reg = <0x26>;
+
+					xbar_amx2_in4_ep: endpoint {
+						remote-endpoint = <&amx2_in4_ep>;
+					};
+				};
+
+				port@27 {
+					reg = <0x27>;
+
+					xbar_amx2_out_ep: endpoint {
+						remote-endpoint = <&amx2_out_ep>;
+					};
+				};
+
+				xbar_adx1_in_port: port@28 {
+					reg = <0x28>;
+
+					xbar_adx1_in_ep: endpoint {
+						remote-endpoint = <&adx1_in_ep>;
+					};
+				};
+
+				port@29 {
+					reg = <0x29>;
+
+					xbar_adx1_out1_ep: endpoint {
+						remote-endpoint = <&adx1_out1_ep>;
+					};
+				};
+
+				port@2a {
+					reg = <0x2a>;
+
+					xbar_adx1_out2_ep: endpoint {
+						remote-endpoint = <&adx1_out2_ep>;
+					};
+				};
+
+				port@2b {
+					reg = <0x2b>;
+
+					xbar_adx1_out3_ep: endpoint {
+						remote-endpoint = <&adx1_out3_ep>;
+					};
+				};
+
+				port@2c {
+					reg = <0x2c>;
+
+					xbar_adx1_out4_ep: endpoint {
+						remote-endpoint = <&adx1_out4_ep>;
+					};
+				};
+
+				xbar_adx2_in_port: port@2d {
+					reg = <0x2d>;
+
+					xbar_adx2_in_ep: endpoint {
+						remote-endpoint = <&adx2_in_ep>;
+					};
+				};
+
+				port@2e {
+					reg = <0x2e>;
+
+					xbar_adx2_out1_ep: endpoint {
+						remote-endpoint = <&adx2_out1_ep>;
+					};
+				};
+
+				port@2f {
+					reg = <0x2f>;
+
+					xbar_adx2_out2_ep: endpoint {
+						remote-endpoint = <&adx2_out2_ep>;
+					};
+				};
+
+				port@30 {
+					reg = <0x30>;
+
+					xbar_adx2_out3_ep: endpoint {
+						remote-endpoint = <&adx2_out3_ep>;
+					};
+				};
+
+				port@31 {
+					reg = <0x31>;
+
+					xbar_adx2_out4_ep: endpoint {
+						remote-endpoint = <&adx2_out4_ep>;
+					};
+				};
+
+				xbar_mixer_in1_port: port@32 {
+					reg = <0x32>;
+
+					xbar_mixer_in1_ep: endpoint {
+						remote-endpoint = <&mixer_in1_ep>;
+					};
+				};
+
+				xbar_mixer_in2_port: port@33 {
+					reg = <0x33>;
+
+					xbar_mixer_in2_ep: endpoint {
+						remote-endpoint = <&mixer_in2_ep>;
+					};
+				};
+
+				xbar_mixer_in3_port: port@34 {
+					reg = <0x34>;
+
+					xbar_mixer_in3_ep: endpoint {
+						remote-endpoint = <&mixer_in3_ep>;
+					};
+				};
+
+				xbar_mixer_in4_port: port@35 {
+					reg = <0x35>;
+
+					xbar_mixer_in4_ep: endpoint {
+						remote-endpoint = <&mixer_in4_ep>;
+					};
+				};
+
+				xbar_mixer_in5_port: port@36 {
+					reg = <0x36>;
+
+					xbar_mixer_in5_ep: endpoint {
+						remote-endpoint = <&mixer_in5_ep>;
+					};
+				};
+
+				xbar_mixer_in6_port: port@37 {
+					reg = <0x37>;
+
+					xbar_mixer_in6_ep: endpoint {
+						remote-endpoint = <&mixer_in6_ep>;
+					};
+				};
+
+				xbar_mixer_in7_port: port@38 {
+					reg = <0x38>;
+
+					xbar_mixer_in7_ep: endpoint {
+						remote-endpoint = <&mixer_in7_ep>;
+					};
+				};
+
+				xbar_mixer_in8_port: port@39 {
+					reg = <0x39>;
+
+					xbar_mixer_in8_ep: endpoint {
+						remote-endpoint = <&mixer_in8_ep>;
+					};
+				};
+
+				xbar_mixer_in9_port: port@3a {
+					reg = <0x3a>;
+
+					xbar_mixer_in9_ep: endpoint {
+						remote-endpoint = <&mixer_in9_ep>;
+					};
+				};
+
+				xbar_mixer_in10_port: port@3b {
+					reg = <0x3b>;
+
+					xbar_mixer_in10_ep: endpoint {
+						remote-endpoint = <&mixer_in10_ep>;
+					};
+				};
+
+				port@3c {
+					reg = <0x3c>;
+
+					xbar_mixer_out1_ep: endpoint {
+						remote-endpoint = <&mixer_out1_ep>;
+					};
+				};
+
+				port@3d {
+					reg = <0x3d>;
+
+					xbar_mixer_out2_ep: endpoint {
+						remote-endpoint = <&mixer_out2_ep>;
+					};
+				};
+
+				port@3e {
+					reg = <0x3e>;
+
+					xbar_mixer_out3_ep: endpoint {
+						remote-endpoint = <&mixer_out3_ep>;
+					};
+				};
+
+				port@3f {
+					reg = <0x3f>;
+
+					xbar_mixer_out4_ep: endpoint {
+						remote-endpoint = <&mixer_out4_ep>;
+					};
+				};
+
+				port@40 {
+					reg = <0x40>;
+
+					xbar_mixer_out5_ep: endpoint {
+						remote-endpoint = <&mixer_out5_ep>;
+					};
+				};
+
+				xbar_ope1_in_port: port@41 {
+					reg = <0x41>;
+
+					xbar_ope1_in_ep: endpoint {
+						remote-endpoint = <&ope1_cif_in_ep>;
+					};
+				};
+
+				port@42 {
+					reg = <0x42>;
+
+					xbar_ope1_out_ep: endpoint {
+						remote-endpoint = <&ope1_cif_out_ep>;
+					};
+				};
+
+				xbar_ope2_in_port: port@43 {
+					reg = <0x43>;
+
+					xbar_ope2_in_ep: endpoint {
+						remote-endpoint = <&ope2_cif_in_ep>;
+					};
+				};
+
+				port@44 {
+					reg = <0x44>;
+
+					xbar_ope2_out_ep: endpoint {
+						remote-endpoint = <&ope2_cif_out_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@702e2000 {
+			status = "okay";
+		};
+
+		interrupt-controller@702f9000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra210-audio-graph-card";
+		status = "okay";
+
+		dais = /* FE */
+		       <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>,
+		       <&admaif7_port>, <&admaif8_port>, <&admaif9_port>,
+		       <&admaif10_port>,
+		       /* Router */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>,
+		       <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>,
+		       <&xbar_dmic2_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_ope1_in_port>, <&xbar_ope2_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>,
+		       <&mixer_out3_port>, <&mixer_out4_port>,
+		       <&mixer_out5_port>,
+		       <&ope1_out_port>, <&ope2_out_port>,
+		       /* I/O DAP Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
+		       <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>;
+
+		label = "NVIDIA Jetson TX1 APE";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
new file mode 100644
index 0000000000..f0d53f0b41
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2530 main board";
+	compatible = "nvidia,p2530", "nvidia,tegra210";
+
+	aliases {
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	/* debug port */
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts
new file mode 100644
index 0000000000..e2a347e572
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts
@@ -0,0 +1,1303 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra210-p2530.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2571 reference design";
+	compatible = "nvidia,p2571", "nvidia,tegra210";
+
+	pinmux: pinmux@700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "aud";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "sys";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi
new file mode 100644
index 0000000000..65181da730
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi
@@ -0,0 +1,1276 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+/ {
+	model = "NVIDIA Tegra210 P2595 I/O board";
+	compatible = "nvidia,p2595", "nvidia,tegra210";
+
+	pinmux: pinmux@700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "dmic1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "dmic1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "dmic2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "dmic2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "aud";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "sys";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
new file mode 100644
index 0000000000..b4a1108c2d
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -0,0 +1,1712 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+/ {
+	model = "NVIDIA Tegra210 P2597 I/O board";
+	compatible = "nvidia,p2597", "nvidia,tegra210";
+
+	aliases {
+		ethernet = "/usb@70090000/ethernet@1";
+	};
+
+	host1x@50000000 {
+		dpaux@54040000 {
+			status = "okay";
+		};
+
+		vi@54080000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+
+			csi@838 {
+				status = "okay";
+			};
+		};
+
+		sor@54580000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1)
+					   GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pinmux: pinmux@700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "touch";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		dvfs_pwm_active_state: pinmux-dvfs-pwm-active {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		dvfs_pwm_inactive_state: pinmux-dvfs-pwm-inactive {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		exp1: gpio@74 {
+			compatible = "ti,tca9539";
+			reg = <0x74>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		exp2: gpio@77 {
+			compatible = "ti,tca9539";
+			reg = <0x77>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	sata@70020000 {
+		status = "okay";
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+	};
+
+	hda@70030000 {
+		nvidia,model = "NVIDIA Jetson TX1 HDA";
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-3}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
+			    "usb3-1";
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		hvddio-pex-supply = <&vdd_1v8>;
+		avdd-usb-supply = <&vdd_3v3_sys>;
+
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@1 {
+			compatible = "usb955,9ff";
+			reg = <1>;
+		};
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&vdd_1v8>;
+		avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
+		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+		hvdd-pex-pll-e-supply = <&vdd_1v8>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					micro_b: usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-3 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "pcie-x1";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-3 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-5 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				vbus-supply = <&vdd_usb_vbus_otg>;
+				usb-role-switch;
+				mode = "otg";
+
+				connector {
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpios = <&gpio TEGRA_GPIO(Z, 0)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usb2-1 {
+				status = "okay";
+				vbus-supply = <&vdd_5v0_rtl>;
+				mode = "host";
+			};
+
+			usb2-2 {
+				status = "okay";
+				vbus-supply = <&vdd_usb_vbus>;
+				mode = "host";
+			};
+
+			usb2-3 {
+				status = "okay";
+				mode = "host";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <1>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	/* MMC/SD */
+	mmc@700b0000 {
+		status = "okay";
+		bus-width = <4>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+
+		vqmmc-supply = <&vddio_sdmmc>;
+		vmmc-supply = <&vdd_3v3_sd>;
+	};
+
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	vdd_sys_mux: regulator-vdd-sys-mux {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SYS_MUX";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_sys_mux>;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_sys_mux>;
+
+		regulator-enable-ramp-delay = <160>;
+	};
+
+	vdd_5v0_io: regulator-vdd-5v0-io {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_IO_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sd: regulator-vdd-3v3-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+
+		regulator-enable-ramp-delay = <472>;
+	};
+
+	vdd_dsi_csi: regulator-vdd-dsi-csi {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD_DSI_CSI_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdd_sys_1v2>;
+	};
+
+	vdd_3v3_dis: regulator-vdd-3v3-dis {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_DIS_3V3_LCD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_1v8_dis: regulator-vdd-1v8-dis {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_LCD_1V8_DIS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8>;
+	};
+
+	vdd_5v0_rtl: regulator-vdd-5v0-rtl {
+		compatible = "regulator-fixed";
+		regulator-name = "RTL_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb_vbus: regulator-vdd-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_cam_1v2: regulator-vdd-cam-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&exp2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_cam_2v8: regulator-vdd-cam-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&exp1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_cam_1v8: regulator-vdd-cam-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&exp2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_usb_vbus_otg: regulator-vdd-usb-vbus-otg {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894-0050-a08.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2894-0050-a08.dts
new file mode 100644
index 0000000000..7ffb351b58
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894-0050-a08.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra210-p2894.dtsi"
+
+/ {
+	model = "NVIDIA Shield TV";
+	compatible = "nvidia,p2894-0050-a08", "nvidia,darcy", "nvidia,tegra210";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
new file mode 100644
index 0000000000..bbd6ff0564
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -0,0 +1,1834 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include "tegra210.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uarta;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	pinmux: pinmux@700008d4 {
+		status = "okay";
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			fps {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fps0 {
+					reg = <0>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					reg = <1>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+				};
+
+				fps2 {
+					reg = <2>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			hog-0 {
+				gpio-hog;
+				output-high;
+				gpios = <2 GPIO_ACTIVE_HIGH>,
+					<7 GPIO_ACTIVE_HIGH>;
+			};
+
+			max77620_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "fps-out";
+					drive-push-pull = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				gpio2 {
+					pins = "gpio2";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6_7 {
+					pins = "gpio5", "gpio6", "gpio7";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&max77620_sd2>;
+				in-ldo7-8-supply = <&max77620_sd2>;
+
+				max77620_sd0: sd0 {
+					regulator-name = "vdd-core";
+					regulator-enable-ramp-delay = <146>;
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-ramp-delay = <27500>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				max77620_sd1: sd1 {
+					regulator-name = "vddio-ddr";
+					regulator-enable-ramp-delay = <130>;
+					regulator-ramp-delay = <27500>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				max77620_sd2: sd2 {
+					regulator-name = "vdd-pre-reg";
+					regulator-enable-ramp-delay = <176>;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-ramp-delay = <27500>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,suspend-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_sd3: sd3 {
+					regulator-name = "vdd-1v8";
+					regulator-enable-ramp-delay = <242>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <27500>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				max77620_ldo0: ldo0 {
+					regulator-name = "avdd-sys";
+					regulator-enable-ramp-delay = <26>;
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo1: ldo1 {
+					regulator-name = "vdd-pex";
+					regulator-enable-ramp-delay = <22>;
+					regulator-min-microvolt = <1075000>;
+					regulator-max-microvolt = <1075000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo2: ldo2 {
+					regulator-name = "vddio-sdmmc3";
+					regulator-enable-ramp-delay = <62>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo3: ldo3 {
+					regulator-name = "vdd-3v3-eth";
+					regulator-enable-ramp-delay = <50>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo4: ldo4 {
+					regulator-name = "vdd-rtc";
+					regulator-enable-ramp-delay = <22>;
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				max77620_ldo5: ldo5 {
+					regulator-name = "avdd-ts-hv";
+					regulator-enable-ramp-delay = <62>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo6: ldo6 {
+					regulator-name = "vdd-ts";
+					regulator-enable-ramp-delay = <36>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo7: ldo7 {
+					regulator-name = "vdd-gen-pll-edp";
+					regulator-enable-ramp-delay = <24>;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,suspend-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo8: ldo8 {
+					regulator-name = "vdd-hdmi-dp";
+					regulator-enable-ramp-delay = <22>;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <0>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <4587 3876>;
+		nvidia,core-pwr-off-time = <39065>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		status = "okay";
+	};
+
+	mmc@700b0600 {
+		bus-width = <8>;
+		non-removable;
+		status = "okay";
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		idle-states {
+			cpu-sleep {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		key-power {
+			debounce-interval = <30>;
+			gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	battery_reg: regulator-vdd-ac-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ac-bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-3v3";
+		regulator-enable-ramp-delay = <160>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	max77620_gpio7: regulator-max77620-gpio7 {
+		compatible = "regulator-fixed";
+		regulator-name = "max77620-gpio7";
+		regulator-enable-ramp-delay = <240>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&max77620_ldo0>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lcd_bl_en: regulator-lcd-bl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-bl-en";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	en_vdd_sd: regulator-vdd-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "en-vdd-sd";
+		regulator-enable-ramp-delay = <472>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3>;
+
+		gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	en_vdd_cam: regulator-vdd-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "en-vdd-cam";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_sys_boost: regulator-vdd-sys-boost {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys-boost";
+		regulator-enable-ramp-delay = <3090>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-hdmi";
+		regulator-enable-ramp-delay = <468>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_sys_boost>;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	en_vdd_cpu_fixed: regulator-vdd-cpu-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-fixed";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vdd_aux_3v3: regulator-vdd-aux-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "aux-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_snsr_pm: regulator-vdd-snsr-pm {
+		compatible = "regulator-fixed";
+		regulator-name = "snsr_pm";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-active-high;
+	};
+
+	vdd_usb_5v0: regulator-vdd-usb-5v0 {
+		compatible = "regulator-fixed";
+		status = "disabled";
+		regulator-name = "vdd-usb-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_3v3>;
+
+		enable-active-high;
+	};
+
+	vdd_cdc_1v2_aud: regulator-vdd-cdc-1v2-aud {
+		compatible = "regulator-fixed";
+		status = "disabled";
+		regulator-name = "vdd_cdc_1v2_aud";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		startup-delay-us = <250000>;
+
+		enable-active-high;
+	};
+
+	vdd_disp_3v0: regulator-vdd-disp-3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-disp-3v0";
+		regulator-enable-ramp-delay = <232>;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+
+		gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_fan: regulator-vdd-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-fan";
+		regulator-enable-ramp-delay = <284>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_vbus1: regulator-usb-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	usb_vbus2: regulator-usb-vbus2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	vdd_3v3_eth: regulator-vdd-3v3-eth {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-3v3-eth-a02";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
new file mode 100644
index 0000000000..c56824d7f4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -0,0 +1,1991 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/mfd/max77620.h>
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Nano Developer Kit";
+	compatible = "nvidia,p3450-0000", "nvidia,tegra210";
+
+	aliases {
+		ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0";
+		rtc0 = "/i2c@7000d000/pmic@3c";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		hvddio-pex-supply = <&vdd_1v8>;
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		vddio-pex-ctl-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+			nvidia,num-lanes = <4>;
+			status = "okay";
+		};
+
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
+			phy-names = "pcie-0";
+			status = "okay";
+
+			ethernet@0,0 {
+				reg = <0x000000 0 0 0 0>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		dpaux@54040000 {
+			status = "okay";
+		};
+
+		vi@54080000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_sys_1v2>;
+
+			csi@838 {
+				status = "okay";
+			};
+		};
+
+		sor@54540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&avdd_io_edp_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+
+			nvidia,xbar-cfg = <2 1 0 3 4>;
+			nvidia,dpaux = <&dpaux>;
+		};
+
+		sor@54580000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1)
+					   GPIO_ACTIVE_LOW>;
+			nvidia,xbar-cfg = <0 1 2 3 4>;
+		};
+
+		dpaux@545c0000 {
+			status = "okay";
+		};
+
+		i2c@546c0000 {
+			status = "okay";
+		};
+	};
+
+	gpu@57000000 {
+		vdd-supply = <&vdd_gpu>;
+		status = "okay";
+	};
+
+	pinmux@700008d4 {
+		dvfs_pwm_active_state: pinmux-dvfs-pwm-active {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		dvfs_pwm_inactive_state: pinmux-dvfs-pwm-inactive {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	/* debug port */
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+
+			label = "module";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+
+		eeprom@57 {
+			compatible = "atmel,24c02";
+			reg = <0x57>;
+
+			label = "system";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupt-parent = <&tegra_pmc>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+					maxim,suspend-fps-time-period-us = <5120>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,suspend-fps-time-period-us = <5120>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			max77620_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "fps-out";
+					drive-push-pull = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				gpio2 {
+					pins = "gpio2";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <4>;
+					maxim,active-fps-power-down-slot = <3>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6_7 {
+					pins = "gpio5", "gpio6", "gpio7";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&vdd_pre>;
+				in-ldo2-supply = <&vdd_3v3_sys>;
+				in-ldo3-5-supply = <&vdd_1v8>;
+				in-ldo4-6-supply = <&vdd_5v0_sys>;
+				in-ldo7-8-supply = <&vdd_pre>;
+				in-sd0-supply = <&vdd_5v0_sys>;
+				in-sd1-supply = <&vdd_5v0_sys>;
+				in-sd2-supply = <&vdd_5v0_sys>;
+				in-sd3-supply = <&vdd_5v0_sys>;
+
+				vdd_soc: sd0 {
+					regulator-name = "VDD_SOC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1170000>;
+					regulator-enable-ramp-delay = <146>;
+					regulator-ramp-delay = <27500>;
+					regulator-ramp-delay-scale = <300>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <6>;
+				};
+
+				vdd_ddr: sd1 {
+					regulator-name = "VDD_DDR_1V1_PMIC";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-enable-ramp-delay = <176>;
+					regulator-ramp-delay = <27500>;
+					regulator-ramp-delay-scale = <300>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <5>;
+					maxim,active-fps-power-down-slot = <2>;
+				};
+
+				vdd_pre: sd2 {
+					regulator-name = "VDD_PRE_REG_1V35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-enable-ramp-delay = <176>;
+					regulator-ramp-delay = <27500>;
+					regulator-ramp-delay-scale = <350>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <2>;
+					maxim,active-fps-power-down-slot = <5>;
+				};
+
+				vdd_1v8: sd3 {
+					regulator-name = "VDD_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <242>;
+					regulator-ramp-delay = <27500>;
+					regulator-ramp-delay-scale = <360>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <4>;
+				};
+
+				vdd_sys_1v2: ldo0 {
+					regulator-name = "AVDD_SYS_1V2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				vdd_pex_1v05: ldo1 {
+					regulator-name = "VDD_PEX_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				vddio_sdmmc: ldo2 {
+					regulator-name = "VDDIO_SDMMC";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				ldo3 {
+					status = "disabled";
+				};
+
+				vdd_rtc: ldo4 {
+					regulator-name = "VDD_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+					regulator-disable-active-discharge;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <6>;
+				};
+
+				ldo5 {
+					status = "disabled";
+				};
+
+				ldo6 {
+					status = "disabled";
+				};
+
+				avdd_1v05_pll: ldo7 {
+					regulator-name = "AVDD_1V05_PLL";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <4>;
+				};
+
+				avdd_1v05: ldo8 {
+					regulator-name = "AVDD_SATA_HDMI_DP_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <6>;
+					maxim,active-fps-power-down-slot = <1>;
+				};
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <0>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <4587 3876>;
+		nvidia,core-pwr-off-time = <39065>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	hda@70030000 {
+		nvidia,model = "NVIDIA Jetson Nano HDA";
+
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
+
+		avdd-usb-supply = <&vdd_3v3_sys>;
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		hvddio-pex-supply = <&vdd_1v8>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&vdd_1v8>;
+		avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+		hvdd-pex-pll-e-supply = <&vdd_1v8>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					micro_b: usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "pcie-x1";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-3 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-5 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "peripheral";
+				usb-role-switch;
+
+				vbus-supply = <&vdd_5v0_usb>;
+
+				connector {
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpios = <&gpio TEGRA_GPIO(CC, 4)
+						      GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+			};
+
+			usb3-0 {
+				status = "okay";
+				nvidia,usb2-companion = <1>;
+				vbus-supply = <&vdd_hub_3v3>;
+			};
+		};
+	};
+
+	mmc@700b0000 {
+		status = "okay";
+		bus-width = <4>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+		disable-wp;
+
+		vqmmc-supply = <&vddio_sdmmc>;
+		vmmc-supply = <&vdd_3v3_sd>;
+	};
+
+	mmc@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+
+		vqmmc-supply = <&vdd_1v8>;
+		vmmc-supply = <&vdd_3v3_sys>;
+
+		non-removable;
+		cap-sdio-irq;
+		keep-power-in-suspend;
+		wakeup-source;
+	};
+
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
+	clock@70110000 {
+		status = "okay";
+
+		nvidia,cf = <6>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,sample-rate = <25000>;
+
+		nvidia,pwm-min-microvolts = <708000>;
+		nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+		nvidia,pwm-to-pmic;
+		nvidia,pwm-tristate-microvolts = <1000000>;
+		nvidia,pwm-voltage-step-microvolts = <19200>;
+
+		pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+		pinctrl-0 = <&dvfs_pwm_active_state>;
+		pinctrl-1 = <&dvfs_pwm_inactive_state>;
+	};
+
+	aconnect@702c0000 {
+		status = "okay";
+
+		ahub@702d0800 {
+			status = "okay";
+
+			admaif@702d0000 {
+				status = "okay";
+			};
+
+			i2s@702d1200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s3_ep>;
+						};
+					};
+
+					i2s3_port: port@1 {
+						reg = <1>;
+
+						i2s3_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1300 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s4_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s4_ep>;
+						};
+					};
+
+					i2s4_port: port@1 {
+						reg = <1>;
+
+						i2s4_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			sfc@702d2000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_in_ep>;
+						};
+					};
+
+					sfc1_out_port: port@1 {
+						reg = <1>;
+
+						sfc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_in_ep>;
+						};
+					};
+
+					sfc2_out_port: port@1 {
+						reg = <1>;
+
+						sfc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc3_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_in_ep>;
+						};
+					};
+
+					sfc3_out_port: port@1 {
+						reg = <1>;
+
+						sfc3_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2600 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc4_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_in_ep>;
+						};
+					};
+
+					sfc4_out_port: port@1 {
+						reg = <1>;
+
+						sfc4_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@702d3000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx1_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx1_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx1_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx1_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in4_ep>;
+						};
+					};
+
+					amx1_out_port: port@4 {
+						reg = <4>;
+
+						amx1_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@702d3100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx2_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx2_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in2_ep>;
+						};
+					};
+
+					amx2_in3_port: port@2 {
+						reg = <2>;
+
+						amx2_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in3_ep>;
+						};
+					};
+
+					amx2_in4_port: port@3 {
+						reg = <3>;
+
+						amx2_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in4_ep>;
+						};
+					};
+
+					amx2_out_port: port@4 {
+						reg = <4>;
+
+						amx2_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_out_ep>;
+						};
+					};
+				};
+			};
+
+			adx@702d3800 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx1_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_in_ep>;
+						};
+					};
+
+					adx1_out1_port: port@1 {
+						reg = <1>;
+
+						adx1_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out1_ep>;
+						};
+					};
+
+					adx1_out2_port: port@2 {
+						reg = <2>;
+
+						adx1_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out2_ep>;
+						};
+					};
+
+					adx1_out3_port: port@3 {
+						reg = <3>;
+
+						adx1_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out3_ep>;
+						};
+					};
+
+					adx1_out4_port: port@4 {
+						reg = <4>;
+
+						adx1_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@702d3900 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx2_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_in_ep>;
+						};
+					};
+
+					adx2_out1_port: port@1 {
+						reg = <1>;
+
+						adx2_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out1_ep>;
+						};
+					};
+
+					adx2_out2_port: port@2 {
+						reg = <2>;
+
+						adx2_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out2_ep>;
+						};
+					};
+
+					adx2_out3_port: port@3 {
+						reg = <3>;
+
+						adx2_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out3_ep>;
+						};
+					};
+
+					adx2_out4_port: port@4 {
+						reg = <4>;
+
+						adx2_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out4_ep>;
+						};
+					};
+				};
+			};
+
+			dmic@702d4000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@702d4100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			processing-engine@702d8000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_in_ep>;
+						};
+					};
+
+					ope1_out_port: port@1 {
+						reg = <0x1>;
+
+						ope1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_out_ep>;
+						};
+					};
+				};
+			};
+
+			processing-engine@702d8400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope2_in_ep>;
+						};
+					};
+
+					ope2_out_port: port@1 {
+						reg = <0x1>;
+
+						ope2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope2_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@702da000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_in_ep>;
+						};
+					};
+
+					mvc1_out_port: port@1 {
+						reg = <1>;
+
+						mvc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@702da200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_in_ep>;
+						};
+					};
+
+					mvc2_out_port: port@1 {
+						reg = <1>;
+
+						mvc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			amixer@702dbb00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						mixer_in1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						mixer_in2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						mixer_in3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						mixer_in4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in4_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						mixer_in5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in5_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						mixer_in6_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in6_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						mixer_in7_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in7_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						mixer_in8_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in8_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						mixer_in9_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in9_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						mixer_in10_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in10_ep>;
+						};
+					};
+
+					mixer_out1_port: port@a {
+						reg = <0xa>;
+
+						mixer_out1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out1_ep>;
+						};
+					};
+
+					mixer_out2_port: port@b {
+						reg = <0xb>;
+
+						mixer_out2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out2_ep>;
+						};
+					};
+
+					mixer_out3_port: port@c {
+						reg = <0xc>;
+
+						mixer_out3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out3_ep>;
+						};
+					};
+
+					mixer_out4_port: port@d {
+						reg = <0xd>;
+
+						mixer_out4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out4_ep>;
+						};
+					};
+
+					mixer_out5_port: port@e {
+						reg = <0xe>;
+
+						mixer_out5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out5_ep>;
+						};
+					};
+				};
+			};
+
+			ports {
+				xbar_i2s3_port: port@c {
+					reg = <0xc>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_i2s4_port: port@d {
+					reg = <0xd>;
+
+					xbar_i2s4_ep: endpoint {
+						remote-endpoint = <&i2s4_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@f {
+					reg = <0xf>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@10 {
+					reg = <0x10>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+
+				xbar_sfc1_in_port: port@12 {
+					reg = <0x12>;
+
+					xbar_sfc1_in_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_in_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_sfc1_out_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc2_in_port: port@14 {
+					reg = <0x14>;
+
+					xbar_sfc2_in_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_in_ep>;
+					};
+				};
+
+				port@15 {
+					reg = <0x15>;
+
+					xbar_sfc2_out_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc3_in_port: port@16 {
+					reg = <0x16>;
+
+					xbar_sfc3_in_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_in_ep>;
+					};
+				};
+
+				port@17 {
+					reg = <0x17>;
+
+					xbar_sfc3_out_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc4_in_port: port@18 {
+					reg = <0x18>;
+
+					xbar_sfc4_in_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_in_ep>;
+					};
+				};
+
+				port@19 {
+					reg = <0x19>;
+
+					xbar_sfc4_out_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc1_in_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_mvc1_in_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_in_ep>;
+					};
+				};
+
+				port@1b {
+					reg = <0x1b>;
+
+					xbar_mvc1_out_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc2_in_port: port@1c {
+					reg = <0x1c>;
+
+					xbar_mvc2_in_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_in_ep>;
+					};
+				};
+
+				port@1d {
+					reg = <0x1d>;
+
+					xbar_mvc2_out_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_out_ep>;
+					};
+				};
+
+				xbar_amx1_in1_port: port@1e {
+					reg = <0x1e>;
+
+					xbar_amx1_in1_ep: endpoint {
+						remote-endpoint = <&amx1_in1_ep>;
+					};
+				};
+
+				xbar_amx1_in2_port: port@1f {
+					reg = <0x1f>;
+
+					xbar_amx1_in2_ep: endpoint {
+						remote-endpoint = <&amx1_in2_ep>;
+					};
+				};
+
+				xbar_amx1_in3_port: port@20 {
+					reg = <0x20>;
+
+					xbar_amx1_in3_ep: endpoint {
+						remote-endpoint = <&amx1_in3_ep>;
+					};
+				};
+
+				xbar_amx1_in4_port: port@21 {
+					reg = <0x21>;
+
+					xbar_amx1_in4_ep: endpoint {
+						remote-endpoint = <&amx1_in4_ep>;
+					};
+				};
+
+				port@22 {
+					reg = <0x22>;
+
+					xbar_amx1_out_ep: endpoint {
+						remote-endpoint = <&amx1_out_ep>;
+					};
+				};
+
+				xbar_amx2_in1_port: port@23 {
+					reg = <0x23>;
+
+					xbar_amx2_in1_ep: endpoint {
+						remote-endpoint = <&amx2_in1_ep>;
+					};
+				};
+
+				xbar_amx2_in2_port: port@24 {
+					reg = <0x24>;
+
+					xbar_amx2_in2_ep: endpoint {
+						remote-endpoint = <&amx2_in2_ep>;
+					};
+				};
+
+				xbar_amx2_in3_port: port@25 {
+					reg = <0x25>;
+
+					xbar_amx2_in3_ep: endpoint {
+						remote-endpoint = <&amx2_in3_ep>;
+					};
+				};
+
+				xbar_amx2_in4_port: port@26 {
+					reg = <0x26>;
+
+					xbar_amx2_in4_ep: endpoint {
+						remote-endpoint = <&amx2_in4_ep>;
+					};
+				};
+
+				port@27 {
+					reg = <0x27>;
+
+					xbar_amx2_out_ep: endpoint {
+						remote-endpoint = <&amx2_out_ep>;
+					};
+				};
+
+				xbar_adx1_in_port: port@28 {
+					reg = <0x28>;
+
+					xbar_adx1_in_ep: endpoint {
+						remote-endpoint = <&adx1_in_ep>;
+					};
+				};
+
+				port@29 {
+					reg = <0x29>;
+
+					xbar_adx1_out1_ep: endpoint {
+						remote-endpoint = <&adx1_out1_ep>;
+					};
+				};
+
+				port@2a {
+					reg = <0x2a>;
+
+					xbar_adx1_out2_ep: endpoint {
+						remote-endpoint = <&adx1_out2_ep>;
+					};
+				};
+
+				port@2b {
+					reg = <0x2b>;
+
+					xbar_adx1_out3_ep: endpoint {
+						remote-endpoint = <&adx1_out3_ep>;
+					};
+				};
+
+				port@2c {
+					reg = <0x2c>;
+
+					xbar_adx1_out4_ep: endpoint {
+						remote-endpoint = <&adx1_out4_ep>;
+					};
+				};
+
+				xbar_adx2_in_port: port@2d {
+					reg = <0x2d>;
+
+					xbar_adx2_in_ep: endpoint {
+						remote-endpoint = <&adx2_in_ep>;
+					};
+				};
+
+				port@2e {
+					reg = <0x2e>;
+
+					xbar_adx2_out1_ep: endpoint {
+						remote-endpoint = <&adx2_out1_ep>;
+					};
+				};
+
+				port@2f {
+					reg = <0x2f>;
+
+					xbar_adx2_out2_ep: endpoint {
+						remote-endpoint = <&adx2_out2_ep>;
+					};
+				};
+
+				port@30 {
+					reg = <0x30>;
+
+					xbar_adx2_out3_ep: endpoint {
+						remote-endpoint = <&adx2_out3_ep>;
+					};
+				};
+
+				port@31 {
+					reg = <0x31>;
+
+					xbar_adx2_out4_ep: endpoint {
+						remote-endpoint = <&adx2_out4_ep>;
+					};
+				};
+
+				xbar_mixer_in1_port: port@32 {
+					reg = <0x32>;
+
+					xbar_mixer_in1_ep: endpoint {
+						remote-endpoint = <&mixer_in1_ep>;
+					};
+				};
+
+				xbar_mixer_in2_port: port@33 {
+					reg = <0x33>;
+
+					xbar_mixer_in2_ep: endpoint {
+						remote-endpoint = <&mixer_in2_ep>;
+					};
+				};
+
+				xbar_mixer_in3_port: port@34 {
+					reg = <0x34>;
+
+					xbar_mixer_in3_ep: endpoint {
+						remote-endpoint = <&mixer_in3_ep>;
+					};
+				};
+
+				xbar_mixer_in4_port: port@35 {
+					reg = <0x35>;
+
+					xbar_mixer_in4_ep: endpoint {
+						remote-endpoint = <&mixer_in4_ep>;
+					};
+				};
+
+				xbar_mixer_in5_port: port@36 {
+					reg = <0x36>;
+
+					xbar_mixer_in5_ep: endpoint {
+						remote-endpoint = <&mixer_in5_ep>;
+					};
+				};
+
+				xbar_mixer_in6_port: port@37 {
+					reg = <0x37>;
+
+					xbar_mixer_in6_ep: endpoint {
+						remote-endpoint = <&mixer_in6_ep>;
+					};
+				};
+
+				xbar_mixer_in7_port: port@38 {
+					reg = <0x38>;
+
+					xbar_mixer_in7_ep: endpoint {
+						remote-endpoint = <&mixer_in7_ep>;
+					};
+				};
+
+				xbar_mixer_in8_port: port@39 {
+					reg = <0x39>;
+
+					xbar_mixer_in8_ep: endpoint {
+						remote-endpoint = <&mixer_in8_ep>;
+					};
+				};
+
+				xbar_mixer_in9_port: port@3a {
+					reg = <0x3a>;
+
+					xbar_mixer_in9_ep: endpoint {
+						remote-endpoint = <&mixer_in9_ep>;
+					};
+				};
+
+				xbar_mixer_in10_port: port@3b {
+					reg = <0x3b>;
+
+					xbar_mixer_in10_ep: endpoint {
+						remote-endpoint = <&mixer_in10_ep>;
+					};
+				};
+
+				port@3c {
+					reg = <0x3c>;
+
+					xbar_mixer_out1_ep: endpoint {
+						remote-endpoint = <&mixer_out1_ep>;
+					};
+				};
+
+				port@3d {
+					reg = <0x3d>;
+
+					xbar_mixer_out2_ep: endpoint {
+						remote-endpoint = <&mixer_out2_ep>;
+					};
+				};
+
+				port@3e {
+					reg = <0x3e>;
+
+					xbar_mixer_out3_ep: endpoint {
+						remote-endpoint = <&mixer_out3_ep>;
+					};
+				};
+
+				port@3f {
+					reg = <0x3f>;
+
+					xbar_mixer_out4_ep: endpoint {
+						remote-endpoint = <&mixer_out4_ep>;
+					};
+				};
+
+				port@40 {
+					reg = <0x40>;
+
+					xbar_mixer_out5_ep: endpoint {
+						remote-endpoint = <&mixer_out5_ep>;
+					};
+				};
+
+				xbar_ope1_in_port: port@41 {
+					reg = <0x41>;
+
+					xbar_ope1_in_ep: endpoint {
+						remote-endpoint = <&ope1_cif_in_ep>;
+					};
+				};
+
+				port@42 {
+					reg = <0x42>;
+
+					xbar_ope1_out_ep: endpoint {
+						remote-endpoint = <&ope1_cif_out_ep>;
+					};
+				};
+
+				xbar_ope2_in_port: port@43 {
+					reg = <0x43>;
+
+					xbar_ope2_in_ep: endpoint {
+						remote-endpoint = <&ope2_cif_in_ep>;
+					};
+				};
+
+				port@44 {
+					reg = <0x44>;
+
+					xbar_ope2_out_ep: endpoint {
+						remote-endpoint = <&ope2_cif_out_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@702e2000 {
+			status = "okay";
+		};
+
+		interrupt-controller@702f9000 {
+			status = "okay";
+		};
+	};
+
+	spi@70410000 {
+		status = "okay";
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <104000000>;
+			spi-tx-bus-width = <2>;
+			spi-rx-bus-width = <2>;
+		};
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		idle-states {
+			cpu-sleep {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+			debounce-interval = <30>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 3 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <240>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_sd: regulator-vdd-3v3-sd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi-5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hub_3v3: regulator-vdd-hub-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_HUB_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_cpu: regulator-vdd-cpu {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_CPU";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_gpu: regulator-vdd-gpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm 1 8000>;
+
+		regulator-name = "VDD_GPU";
+		regulator-min-microvolt = <710000>;
+		regulator-max-microvolt = <1320000>;
+		regulator-ramp-delay = <80>;
+		regulator-enable-ramp-delay = <2000>;
+		regulator-settling-time-us = <160>;
+
+		enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	avdd_io_edp_1v05: regulator-avdd-io-epd-1v05 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "AVDD_IO_EDP_1V05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&avdd_1v05_pll>;
+	};
+
+	vdd_5v0_usb: regulator-vdd-5v-usb {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_5V_USB";
+		regulator-min-microvolt = <50000000>;
+		regulator-max-microvolt = <50000000>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra210-audio-graph-card";
+		status = "okay";
+
+		dais = /* FE */
+		       <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>,
+		       <&admaif7_port>, <&admaif8_port>, <&admaif9_port>,
+		       <&admaif10_port>,
+		       /* Router */
+		       <&xbar_i2s3_port>, <&xbar_i2s4_port>,
+		       <&xbar_dmic1_port>, <&xbar_dmic2_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_ope1_in_port>, <&xbar_ope2_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>,
+		       <&mixer_out3_port>, <&mixer_out4_port>,
+		       <&mixer_out5_port>,
+		       <&ope1_out_port>, <&ope2_out_port>,
+		       /* I/O DAP Ports */
+		       <&i2s3_port>, <&i2s4_port>,
+		       <&dmic1_port>, <&dmic2_port>;
+
+		label = "NVIDIA Jetson Nano APE";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
new file mode 100644
index 0000000000..53805555dd
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -0,0 +1,1935 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "Google Pixel C";
+	compatible = "google,smaug-rev8", "google,smaug-rev7",
+		     "google,smaug-rev6", "google,smaug-rev5",
+		     "google,smaug-rev4", "google,smaug-rev3",
+		     "google,smaug-rev2", "google,smaug-rev1",
+		     "google,smaug", "nvidia,tegra210";
+
+	aliases {
+		serial0 = &uarta;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	host1x@50000000 {
+		dpaux: dpaux@545c0000 {
+			status = "okay";
+		};
+	};
+
+	gpu@57000000 {
+		vdd-supply = <&max77621_gpu>;
+		status = "okay";
+	};
+
+	pinmux: pinmux@700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "touch";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "aud";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "qspi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "qspi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "qspi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "qspi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		bluetooth {
+			compatible = "brcm,bcm43540-bt";
+			max-speed = <4000000>;
+			brcm,bt-pcm-int-params = [01 02 00 01 01];
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "host-wakeup";
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <1000000>;
+
+		ec@1e {
+			compatible = "google,cros-ec-i2c";
+			reg = <0x1e>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 1) IRQ_TYPE_LEVEL_LOW>;
+			wakeup-source;
+
+			ec_i2c_0: i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				battery: bq27742@55 {
+					compatible = "ti,bq27742";
+					reg = <0x55>;
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <1000000>;
+
+		max77621_cpu: max77621@1b {
+			compatible = "maxim,max77621";
+			reg = <0x1b>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Y, 1) IRQ_TYPE_LEVEL_LOW>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1231250>;
+			regulator-name = "PPVAR_CPU";
+			regulator-ramp-delay = <12500>;
+			maxim,dvs-default-state = <1>;
+			maxim,enable-active-discharge;
+			maxim,enable-bias-control;
+			maxim,enable-gpio = <&pmic 5 0>;
+			maxim,externally-enable;
+		};
+
+		max77621_gpu: regulator@1c {
+			compatible = "maxim,max77621";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(A, 6) IRQ_TYPE_LEVEL_LOW>;
+			regulator-min-microvolt = <840000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-name = "PPVAR_GPU";
+			regulator-ramp-delay = <12500>;
+			maxim,dvs-default-state = <1>;
+			maxim,enable-active-discharge;
+			maxim,enable-bias-control;
+			maxim,enable-gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			maxim,externally-enable;
+		};
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			fps {
+				fps0 {
+					maxim,shutdown-fps-time-period-us = <5120>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,shutdown-fps-time-period-us = <5120>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			max77620_default: pinmux {
+				gpio0_1_2_7 {
+					pins = "gpio0", "gpio1", "gpio2", "gpio7";
+					function = "gpio";
+				};
+
+				/*
+				 * GPIO3 is used to en_pp3300, and it is part of power
+				 * sequence, So it must be sequenced up (automatically
+				 * set by OTP) and down properly.
+				 */
+				gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <4>;
+					maxim,active-fps-power-down-slot = <2>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6 {
+					pins = "gpio5", "gpio6";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&pp1350>;
+				in-ldo2-supply = <&pp3300>;
+				in-ldo3-5-supply = <&pp3300>;
+				in-ldo7-8-supply = <&pp1350>;
+
+				ppvar_soc: sd0 {
+					regulator-name = "PPVAR_SOC";
+					regulator-min-microvolt = <825000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1100_sd1: sd1 {
+					regulator-name = "PP1100";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <5>;
+					maxim,active-fps-power-down-slot = <1>;
+				};
+
+				pp1350: sd2 {
+					regulator-name = "PP1350";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <2>;
+					maxim,active-fps-power-down-slot = <5>;
+				};
+
+				pp1800: sd3 {
+					regulator-name = "PP1800";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <3>;
+				};
+
+				pp1200_avdd: ldo0 {
+					regulator-name = "PP1200_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1200_rcam: ldo1 {
+					regulator-name = "PP1200_RCAM";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp_ldo2: ldo2 {
+					regulator-name = "PP_LDO2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <11000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp2800l_rcam: ldo3 {
+					regulator-name = "PP2800L_RCAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-enable-ramp-delay = <50>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp100_soc_rtc: ldo4 {
+					regulator-name = "PP1100_SOC_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on; /* Check this */
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp2800l_fcam: ldo5 {
+					regulator-name = "PP2800L_FCAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				ldo6 {
+					/* Unused. */
+					regulator-name = "PP_LDO6";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <36>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1050_avdd: ldo7 {
+					regulator-name = "PP1050_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <4>;
+				};
+
+				avddio_1v05: ldo8 {
+					regulator-name = "AVDDIO_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+			};
+		};
+	};
+
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		nau8825@1a {
+			compatible = "nuvoton,nau8825";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
+			clock-names = "mclk";
+
+			nuvoton,jkdet-enable;
+			nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+			nuvoton,vref-impedance = <2>;
+			nuvoton,micbias-voltage = <6>;
+			nuvoton,sar-threshold-num = <4>;
+			nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+			nuvoton,sar-hysteresis = <1>;
+			nuvoton,sar-voltage = <0>;
+			nuvoton,sar-compare-time = <0>;
+			nuvoton,sar-sampling-time = <0>;
+			nuvoton,short-key-debounce = <2>;
+			nuvoton,jack-insert-debounce = <7>;
+			nuvoton,jack-eject-debounce = <7>;
+			status = "okay";
+		};
+
+		audio-codec@2d {
+			compatible = "realtek,rt5677";
+			reg = <0x2d>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_LEVEL_HIGH>;
+			realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "okay";
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <0>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <12000 6000>;
+		nvidia,core-pwr-off-time = <39053>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+		phy-names = "usb2-0", "usb3-0";
+
+		dvddio-pex-supply = <&avddio_1v05>;
+		hvddio-pex-supply = <&pp1800>;
+		avdd-usb-supply = <&pp3300>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&pp1800>;
+		avdd-pll-uerefe-supply = <&pp1050_avdd>;
+		dvdd-pex-pll-supply = <&avddio_1v05>;
+		hvdd-pex-pll-e-supply = <&pp1800>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				vbus-supply = <&usbc_vbus>;
+				mode = "otg";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+		};
+	};
+
+	mmc@700b0200 {
+		power-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		non-removable;
+		vqmmc-supply = <&pp1800>;
+		vmmc-supply = <&pp3300>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		wifi@1 {
+			compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac";
+			reg = <1>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 2) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	mmc@700b0600 {
+		bus-width = <8>;
+		non-removable;
+		status = "okay";
+	};
+
+	clock@70110000 {
+		status = "okay";
+		nvidia,cf = <6>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,i2c-fs-rate = <400000>;
+		nvidia,sample-rate = <12500>;
+		vdd-cpu-supply = <&max77621_cpu>;
+	};
+
+	aconnect@702c0000 {
+		status = "okay";
+
+		dma-controller@702e2000 {
+			status = "okay";
+		};
+
+		interrupt-controller@702f9000 {
+			status = "okay";
+		};
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		idle-states {
+			cpu-sleep {
+				arm,psci-suspend-param = <0x00010007>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(B, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+
+		switch-tablet-mode {
+			label = "Tablet Mode";
+			gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			wakeup-source;
+		};
+	};
+
+	max98357a {
+		compatible = "maxim,max98357a";
+		status = "okay";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "PPVAR_SYS";
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		regulator-always-on;
+	};
+
+	pplcd_vdd: regulator-pplcd-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "PPLCD_VDD";
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	pp3000_always: regulator-pp3000-always {
+		compatible = "regulator-fixed";
+		regulator-name = "PP3000_ALWAYS";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+	};
+
+	pp3300: regulator-pp3000 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP3300";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	pp5000: regulator-pp5000 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP5000";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	pp1800_lcdio: regulator-pp1800-lcdio {
+		compatible = "regulator-fixed";
+		regulator-name = "PP1800_LCDIO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	pp1800_cam: regulator-pp1800-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "PP1800_CAM";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
+		enable-active-high;
+	};
+
+	usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USBC_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
new file mode 100644
index 0000000000..47f8268e46
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -0,0 +1,2178 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra210-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra210-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+#include <dt-bindings/reset/tegra210-car.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+/ {
+	compatible = "nvidia,tegra210";
+	interrupt-parent = <&lic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	pcie@1003000 {
+		compatible = "nvidia,tegra210-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA210_CLK_PCIE>,
+			 <&tegra_car TEGRA210_CLK_AFI>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>,
+			 <&tegra_car TEGRA210_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+
+		pinctrl-names = "default", "idle";
+		pinctrl-0 = <&pex_dpd_disable>;
+		pinctrl-1 = <&pex_dpd_enable>;
+
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra210-host1x";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA210_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>;
+
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+
+		dpaux1: dpaux@54040000 {
+			compatible = "nvidia,tegra210-dpaux";
+			reg = <0x0 0x54040000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DPAUX1>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 207>;
+			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
+			status = "disabled";
+
+			state_dpaux1_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux1_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux1_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra210-vi";
+			reg = <0x0 0x54080000 0x0 0x700>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+			clocks = <&tegra_car TEGRA210_CLK_VI>;
+			power-domains = <&pd_venc>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x0 0x0 0x54080000 0x2000>;
+
+			csi@838 {
+				compatible = "nvidia,tegra210-csi";
+				reg = <0x838 0x1300>;
+				status = "disabled";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+						  <&tegra_car TEGRA210_CLK_CILCD>,
+						  <&tegra_car TEGRA210_CLK_CILE>,
+						  <&tegra_car TEGRA210_CLK_CSI_TPG>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+							 <&tegra_car TEGRA210_CLK_PLL_P>,
+							 <&tegra_car TEGRA210_CLK_PLL_P>;
+				assigned-clock-rates = <102000000>,
+						       <102000000>,
+						       <102000000>,
+						       <972000000>;
+
+				clocks = <&tegra_car TEGRA210_CLK_CSI>,
+					 <&tegra_car TEGRA210_CLK_CILAB>,
+					 <&tegra_car TEGRA210_CLK_CILCD>,
+					 <&tegra_car TEGRA210_CLK_CILE>,
+					 <&tegra_car TEGRA210_CLK_CSI_TPG>;
+				clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+				power-domains = <&pd_sor>;
+			};
+		};
+
+		tsec@54100000 {
+			compatible = "nvidia,tegra210-tsec";
+			reg = <0x0 0x54100000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_TSEC>;
+			clock-names = "tsec";
+			resets = <&tegra_car 83>;
+			reset-names = "tsec";
+			status = "disabled";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra210-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DISP1>;
+			clock-names = "dc";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+			nvidia,head = <0>;
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra210-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DISP2>;
+			clock-names = "dc";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+			nvidia,head = <1>;
+		};
+
+		dsia: dsi@54300000 {
+			compatible = "nvidia,tegra210-dsi";
+			reg = <0x0 0x54300000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA210_CLK_DSIA>,
+				 <&tegra_car TEGRA210_CLK_DSIALP>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			power-domains = <&pd_sor>;
+			nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		vic@54340000 {
+			compatible = "nvidia,tegra210-vic";
+			reg = <0x0 0x54340000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_VIC03>;
+			clock-names = "vic";
+			resets = <&tegra_car 178>;
+			reset-names = "vic";
+
+			iommus = <&mc TEGRA_SWGROUP_VIC>;
+			power-domains = <&pd_vic>;
+		};
+
+		nvjpg@54380000 {
+			compatible = "nvidia,tegra210-nvjpg";
+			reg = <0x0 0x54380000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		dsib: dsi@54400000 {
+			compatible = "nvidia,tegra210-dsi";
+			reg = <0x0 0x54400000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA210_CLK_DSIB>,
+				 <&tegra_car TEGRA210_CLK_DSIBLP>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			power-domains = <&pd_sor>;
+			nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		nvdec@54480000 {
+			compatible = "nvidia,tegra210-nvdec";
+			reg = <0x0 0x54480000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		nvenc@544c0000 {
+			compatible = "nvidia,tegra210-nvenc";
+			reg = <0x0 0x544c0000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		tsec@54500000 {
+			compatible = "nvidia,tegra210-tsec";
+			reg = <0x0 0x54500000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_TSECB>;
+			clock-names = "tsec";
+			resets = <&tegra_car 206>;
+			reset-names = "tsec";
+			status = "disabled";
+		};
+
+		sor0: sor@54540000 {
+			compatible = "nvidia,tegra210-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+				 <&tegra_car TEGRA210_CLK_SOR0_OUT>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>,
+				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+			clock-names = "sor", "out", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux_aux>;
+			pinctrl-1 = <&state_dpaux_i2c>;
+			pinctrl-2 = <&state_dpaux_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
+			status = "disabled";
+		};
+
+		sor1: sor@54580000 {
+			compatible = "nvidia,tegra210-sor1";
+			reg = <0x0 0x54580000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_SOR1>,
+				 <&tegra_car TEGRA210_CLK_SOR1_OUT>,
+				 <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>,
+				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+			clock-names = "sor", "out", "parent", "dp", "safe";
+			resets = <&tegra_car 183>;
+			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux1_aux>;
+			pinctrl-1 = <&state_dpaux1_i2c>;
+			pinctrl-2 = <&state_dpaux1_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
+			status = "disabled";
+		};
+
+		dpaux: dpaux@545c0000 {
+			compatible = "nvidia,tegra210-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
+			status = "disabled";
+
+			state_dpaux_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		isp@54600000 {
+			compatible = "nvidia,tegra210-isp";
+			reg = <0x0 0x54600000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_ISPA>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+			status = "disabled";
+		};
+
+		isp@54680000 {
+			compatible = "nvidia,tegra210-isp";
+			reg = <0x0 0x54680000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_ISPB>;
+			resets = <&tegra_car 3>;
+			reset-names = "isp";
+			status = "disabled";
+		};
+
+		i2c@546c0000 {
+			compatible = "nvidia,tegra210-i2c-vi";
+			reg = <0x0 0x546c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_VI_I2C>,
+				 <&tegra_car TEGRA210_CLK_I2CSLOW>;
+			clock-names = "div-clk", "slow";
+			resets = <&tegra_car 208>;
+			reset-names = "i2c";
+			power-domains = <&pd_venc>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x2000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gpu@57000000 {
+		compatible = "nvidia,gm20b";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA210_CLK_GPU>,
+			 <&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
+			 <&tegra_car TEGRA210_CLK_PLL_G_REF>;
+		clock-names = "gpu", "pwr", "ref";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra210-ictlr";
+		reg = <0x0 0x60004000 0x0 0x40>, /* primary controller */
+		      <0x0 0x60004100 0x0 0x40>, /* secondary controller */
+		      <0x0 0x60004200 0x0 0x40>, /* tertiary controller */
+		      <0x0 0x60004300 0x0 0x40>, /* quaternary controller */
+		      <0x0 0x60004400 0x0 0x40>, /* quinary controller */
+		      <0x0 0x60004500 0x0 0x40>; /* senary controller */
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra210-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+		clock-names = "timer";
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra210-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra210-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbdma: dma@60020000 {
+		compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_APBDMA>;
+		clock-names = "dma";
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x70000008 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@700008d4 {
+		compatible = "nvidia,tegra210-pinmux";
+		reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x294>; /* Mux registers */
+
+		sdmmc1_1v8_drv: pinmux-sdmmc1-1v8-drv {
+			sdmmc1 {
+				nvidia,pins = "drive_sdmmc1";
+				nvidia,pull-down-strength = <0x4>;
+				nvidia,pull-up-strength = <0x3>;
+			};
+		};
+
+		sdmmc1_3v3_drv: pinmux-sdmmc1-3v3-drv {
+			sdmmc1 {
+				nvidia,pins = "drive_sdmmc1";
+				nvidia,pull-down-strength = <0x8>;
+				nvidia,pull-up-strength = <0x8>;
+			};
+		};
+
+		sdmmc2_1v8_drv: pinmux-sdmmc2-1v8-drv {
+			sdmmc2 {
+				nvidia,pins = "drive_sdmmc2";
+				nvidia,pull-down-strength = <0x10>;
+				nvidia,pull-up-strength = <0x10>;
+			};
+		};
+
+		sdmmc3_1v8_drv: pinmux-sdmmc3-1v8-drv {
+			sdmmc3 {
+				nvidia,pins = "drive_sdmmc3";
+				nvidia,pull-down-strength = <0x4>;
+				nvidia,pull-up-strength = <0x3>;
+			};
+		};
+
+		sdmmc3_3v3_drv: pinmux-sdmmc3-3v3-drv {
+			sdmmc3 {
+				nvidia,pins = "drive_sdmmc3";
+				nvidia,pull-down-strength = <0x8>;
+				nvidia,pull-up-strength = <0x8>;
+			};
+		};
+
+		sdmmc4_1v8_drv: pinmux-sdmmc4-1v8-drv {
+			sdmmc4 {
+				nvidia,pins = "drive_sdmmc4";
+				nvidia,pull-down-strength = <0x10>;
+				nvidia,pull-up-strength = <0x10>;
+			};
+		};
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performance. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra210-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA210_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		pinctrl-0 = <&state_dpaux1_i2c>;
+		pinctrl-1 = <&state_dpaux1_off>;
+		pinctrl-names = "default", "idle";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d100 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		pinctrl-0 = <&state_dpaux_i2c>;
+		pinctrl-1 = <&state_dpaux_off>;
+		pinctrl-names = "default", "idle";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&tegra_pmc>;
+		clocks = <&tegra_car TEGRA210_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra210-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		pinmux {
+			pex_dpd_disable: pex-dpd-disable {
+				pins = "pex-bias", "pex-clk1", "pex-clk2";
+				low-power-disable;
+			};
+
+			pex_dpd_enable: pex-dpd-enable {
+				pins = "pex-bias", "pex-clk1", "pex-clk2";
+				low-power-enable;
+			};
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+		};
+
+		powergates {
+			pd_audio: aud {
+				clocks = <&tegra_car TEGRA210_CLK_APE>,
+					 <&tegra_car TEGRA210_CLK_APB2APE>;
+				resets = <&tegra_car 198>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_sor: sor {
+				clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_CILAB>,
+					 <&tegra_car TEGRA210_CLK_CILCD>,
+					 <&tegra_car TEGRA210_CLK_CILE>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				resets = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA210_CLK_VI>,
+					 <&tegra_car TEGRA210_CLK_CSI>;
+				resets = <&mc TEGRA210_MC_RESET_VI>,
+					 <&tegra_car 20>,
+					 <&tegra_car 52>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vic: vic {
+				clocks = <&tegra_car TEGRA210_CLK_VIC03>;
+				resets = <&tegra_car 178>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbss: xusba {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+				resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbdev: xusbb {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>;
+				resets = <&tegra_car 95>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbhost: xusbc {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
+				resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra210-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA210_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra210-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA210_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	emc: external-memory-controller@7001b000 {
+		compatible = "nvidia,tegra210-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>,
+		      <0x0 0x7001e000 0x0 0x1000>,
+		      <0x0 0x7001f000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA210_CLK_EMC>;
+		clock-names = "emc";
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		nvidia,memory-controller = <&mc>;
+		#cooling-cells = <2>;
+	};
+
+	sata@70020000 {
+		compatible = "nvidia,tegra210-ahci";
+		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
+		      <0x0 0x70020000 0x0 0x7000>, /* SATA */
+		      <0x0 0x70001100 0x0 0x1000>; /* SATA AUX */
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SATA>,
+			 <&tegra_car TEGRA210_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
+		resets = <&tegra_car 124>,
+			 <&tegra_car 129>,
+			 <&tegra_car 123>;
+		reset-names = "sata", "sata-cold", "sata-oob";
+		status = "disabled";
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_HDA>,
+		         <&tegra_car TEGRA210_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA210_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		power-domains = <&pd_sor>;
+		status = "disabled";
+	};
+
+	usb@70090000 {
+		compatible = "nvidia,tegra210-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA210_CLK_CLK_M>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+		power-domains = <&pd_xusbhost>, <&pd_xusbss>;
+		power-domain-names = "xusb_host", "xusb_ss";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra210-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+		nvidia,pmc = <&tegra_pmc>;
+
+		status = "disabled";
+
+		pads {
+			usb2 {
+				clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+				clock-names = "pll";
+				resets = <&tegra_car 205>;
+				reset-names = "phy";
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-5 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-6 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+				clock-names = "pll";
+				resets = <&tegra_car 204>;
+				reset-names = "phy";
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			usb2-3 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+
+			usb3-2 {
+				status = "disabled";
+			};
+
+			usb3-3 {
+				status = "disabled";
+			};
+		};
+	};
+
+	mmc@700b0000 {
+		compatible = "nvidia,tegra210-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
+				"sdmmc-3v3-drv", "sdmmc-1v8-drv";
+		pinctrl-0 = <&sdmmc1_3v3>;
+		pinctrl-1 = <&sdmmc1_1v8>;
+		pinctrl-2 = <&sdmmc1_3v3_drv>;
+		pinctrl-3 = <&sdmmc1_1v8_drv>;
+		nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+		nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+		nvidia,default-tap = <0x2>;
+		nvidia,default-trim = <0x4>;
+		assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+				  <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
+				  <&tegra_car TEGRA210_CLK_PLL_C4>;
+		assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+		assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
+		status = "disabled";
+	};
+
+	mmc@700b0200 {
+		compatible = "nvidia,tegra210-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		pinctrl-names = "sdmmc-1v8-drv";
+		pinctrl-0 = <&sdmmc2_1v8_drv>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+		nvidia,default-tap = <0x8>;
+		nvidia,default-trim = <0x0>;
+		status = "disabled";
+	};
+
+	mmc@700b0400 {
+		compatible = "nvidia,tegra210-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
+				"sdmmc-3v3-drv", "sdmmc-1v8-drv";
+		pinctrl-0 = <&sdmmc3_3v3>;
+		pinctrl-1 = <&sdmmc3_1v8>;
+		pinctrl-2 = <&sdmmc3_3v3_drv>;
+		pinctrl-3 = <&sdmmc3_1v8_drv>;
+		nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+		nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+		nvidia,default-tap = <0x3>;
+		nvidia,default-trim = <0x3>;
+		status = "disabled";
+	};
+
+	mmc@700b0600 {
+		compatible = "nvidia,tegra210-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		pinctrl-names = "sdmmc-3v3-drv", "sdmmc-1v8-drv";
+		pinctrl-0 = <&sdmmc4_1v8_drv>;
+		pinctrl-1 = <&sdmmc4_1v8_drv>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+		nvidia,default-tap = <0x8>;
+		nvidia,default-trim = <0x0>;
+		assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+				  <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+		assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+		nvidia,dqs-trim = <40>;
+		mmc-hs400-1_8v;
+		status = "disabled";
+	};
+
+	usb@700d0000 {
+		compatible = "nvidia,tegra210-xudc";
+		reg = <0x0 0x700d0000 0x0 0x8000>,
+		      <0x0 0x700d8000 0x0 0x1000>,
+		      <0x0 0x700d9000 0x0 0x1000>;
+		reg-names = "base", "fpci", "ipfs";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+		clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+		power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+		power-domain-names = "dev", "ss";
+		nvidia,xusb-padctl = <&padctl>;
+		status = "disabled";
+	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra210-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
+		      <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "thermal", "edp";
+		clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
+			<&tegra_car TEGRA210_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+				nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra210-mipi";
+		reg = <0x0 0x700e3000 0x0 0x100>;
+		clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+		clock-names = "mipi-cal";
+		power-domains = <&pd_sor>;
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra210-dfll";
+		reg = <0 0x70110000 0 0x100>, /* DFLL control */
+		      <0 0x70110000 0 0x100>, /* I2C output control */
+		      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+		      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA210_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA210_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>,
+			 <&tegra_car 155>;
+		reset-names = "dvco", "dfll";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		status = "disabled";
+	};
+
+	aconnect@702c0000 {
+		compatible = "nvidia,tegra210-aconnect";
+		clocks = <&tegra_car TEGRA210_CLK_APE>,
+			 <&tegra_car TEGRA210_CLK_APB2APE>;
+		clock-names = "ape", "apb2ape";
+		power-domains = <&pd_audio>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
+		status = "disabled";
+
+		tegra_ahub: ahub@702d0800 {
+			compatible = "nvidia,tegra210-ahub";
+			reg = <0x702d0800 0x800>;
+			clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+			clock-names = "ahub";
+			assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>;
+			assigned-clock-rates = <81600000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x702d0000 0x702d0000 0x0000e400>;
+			status = "disabled";
+
+			tegra_admaif: admaif@702d0000 {
+				compatible = "nvidia,tegra210-admaif";
+				reg = <0x702d0000 0x800>;
+				dmas = <&adma 1>,  <&adma 1>,
+				       <&adma 2>,  <&adma 2>,
+				       <&adma 3>,  <&adma 3>,
+				       <&adma 4>,  <&adma 4>,
+				       <&adma 5>,  <&adma 5>,
+				       <&adma 6>,  <&adma 6>,
+				       <&adma 7>,  <&adma 7>,
+				       <&adma 8>,  <&adma 8>,
+				       <&adma 9>,  <&adma 9>,
+				       <&adma 10>, <&adma 10>;
+				dma-names = "rx1",  "tx1",
+					    "rx2",  "tx2",
+					    "rx3",  "tx3",
+					    "rx4",  "tx4",
+					    "rx5",  "tx5",
+					    "rx6",  "tx6",
+					    "rx7",  "tx7",
+					    "rx8",  "tx8",
+					    "rx9",  "tx9",
+					    "rx10", "tx10";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					admaif1_port: port@0 {
+						reg = <0>;
+
+						admaif1_ep: endpoint {
+							remote-endpoint = <&xbar_admaif1_ep>;
+						};
+					};
+
+					admaif2_port: port@1 {
+						reg = <1>;
+
+						admaif2_ep: endpoint {
+							remote-endpoint = <&xbar_admaif2_ep>;
+						};
+					};
+
+					admaif3_port: port@2 {
+						reg = <2>;
+
+						admaif3_ep: endpoint {
+							remote-endpoint = <&xbar_admaif3_ep>;
+						};
+					};
+
+					admaif4_port: port@3 {
+						reg = <3>;
+
+						admaif4_ep: endpoint {
+							remote-endpoint = <&xbar_admaif4_ep>;
+						};
+					};
+
+					admaif5_port: port@4 {
+						reg = <4>;
+
+						admaif5_ep: endpoint {
+							remote-endpoint = <&xbar_admaif5_ep>;
+						};
+					};
+
+					admaif6_port: port@5 {
+						reg = <5>;
+
+						admaif6_ep: endpoint {
+							remote-endpoint = <&xbar_admaif6_ep>;
+						};
+					};
+
+					admaif7_port: port@6 {
+						reg = <6>;
+
+						admaif7_ep: endpoint {
+							remote-endpoint = <&xbar_admaif7_ep>;
+						};
+					};
+
+					admaif8_port: port@7 {
+						reg = <7>;
+
+						admaif8_ep: endpoint {
+							remote-endpoint = <&xbar_admaif8_ep>;
+						};
+					};
+
+					admaif9_port: port@8 {
+						reg = <8>;
+
+						admaif9_ep: endpoint {
+							remote-endpoint = <&xbar_admaif9_ep>;
+						};
+					};
+
+					admaif10_port: port@9 {
+						reg = <9>;
+
+						admaif10_ep: endpoint {
+							remote-endpoint = <&xbar_admaif10_ep>;
+						};
+					};
+				};
+			};
+
+			tegra_i2s1: i2s@702d1000 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1000 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S0>,
+					 <&tegra_car TEGRA210_CLK_I2S0_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S1";
+				status = "disabled";
+			};
+
+			tegra_i2s2: i2s@702d1100 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1100 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S1>,
+					 <&tegra_car TEGRA210_CLK_I2S1_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S1>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S2";
+				status = "disabled";
+			};
+
+			tegra_i2s3: i2s@702d1200 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1200 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S2>,
+					 <&tegra_car TEGRA210_CLK_I2S2_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S2>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S3";
+				status = "disabled";
+			};
+
+			tegra_i2s4: i2s@702d1300 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1300 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S3>,
+					 <&tegra_car TEGRA210_CLK_I2S3_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S3>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S4";
+				status = "disabled";
+			};
+
+			tegra_i2s5: i2s@702d1400 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1400 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S4>,
+					 <&tegra_car TEGRA210_CLK_I2S4_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S4>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S5";
+				status = "disabled";
+			};
+
+			tegra_sfc1: sfc@702d2000 {
+				compatible = "nvidia,tegra210-sfc";
+				reg = <0x702d2000 0x200>;
+				sound-name-prefix = "SFC1";
+				status = "disabled";
+			};
+
+			tegra_sfc2: sfc@702d2200 {
+				compatible = "nvidia,tegra210-sfc";
+				reg = <0x702d2200 0x200>;
+				sound-name-prefix = "SFC2";
+				status = "disabled";
+			};
+
+			tegra_sfc3: sfc@702d2400 {
+				compatible = "nvidia,tegra210-sfc";
+				reg = <0x702d2400 0x200>;
+				sound-name-prefix = "SFC3";
+				status = "disabled";
+			};
+
+			tegra_sfc4: sfc@702d2600 {
+				compatible = "nvidia,tegra210-sfc";
+				reg = <0x702d2600 0x200>;
+				sound-name-prefix = "SFC4";
+				status = "disabled";
+			};
+
+			tegra_amx1: amx@702d3000 {
+				compatible = "nvidia,tegra210-amx";
+				reg = <0x702d3000 0x100>;
+				sound-name-prefix = "AMX1";
+				status = "disabled";
+			};
+
+			tegra_amx2: amx@702d3100 {
+				compatible = "nvidia,tegra210-amx";
+				reg = <0x702d3100 0x100>;
+				sound-name-prefix = "AMX2";
+				status = "disabled";
+			};
+
+			tegra_adx1: adx@702d3800 {
+				compatible = "nvidia,tegra210-adx";
+				reg = <0x702d3800 0x100>;
+				sound-name-prefix = "ADX1";
+				status = "disabled";
+			};
+
+			tegra_adx2: adx@702d3900 {
+				compatible = "nvidia,tegra210-adx";
+				reg = <0x702d3900 0x100>;
+				sound-name-prefix = "ADX2";
+				status = "disabled";
+			};
+
+			tegra_dmic1: dmic@702d4000 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x702d4000 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+				clock-names = "dmic";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC1";
+				status = "disabled";
+			};
+
+			tegra_dmic2: dmic@702d4100 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x702d4100 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_DMIC2>;
+				clock-names = "dmic";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC2>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC2";
+				status = "disabled";
+			};
+
+			tegra_dmic3: dmic@702d4200 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x702d4200 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_DMIC3>;
+				clock-names = "dmic";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC3>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC3";
+				status = "disabled";
+			};
+
+			tegra_ope1: processing-engine@702d8000 {
+				compatible = "nvidia,tegra210-ope";
+				reg = <0x702d8000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				sound-name-prefix = "OPE1";
+				status = "disabled";
+
+				equalizer@702d8100 {
+					compatible = "nvidia,tegra210-peq";
+					reg = <0x702d8100 0x100>;
+				};
+
+				dynamic-range-compressor@702d8200 {
+					compatible = "nvidia,tegra210-mbdrc";
+					reg = <0x702d8200 0x200>;
+				};
+			};
+
+			tegra_ope2: processing-engine@702d8400 {
+				compatible = "nvidia,tegra210-ope";
+				reg = <0x702d8400 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				sound-name-prefix = "OPE2";
+				status = "disabled";
+
+				equalizer@702d8500 {
+					compatible = "nvidia,tegra210-peq";
+					reg = <0x702d8500 0x100>;
+				};
+
+				dynamic-range-compressor@702d8600 {
+					compatible = "nvidia,tegra210-mbdrc";
+					reg = <0x702d8600 0x200>;
+				};
+			};
+
+			tegra_mvc1: mvc@702da000 {
+				compatible = "nvidia,tegra210-mvc";
+				reg = <0x702da000 0x200>;
+				sound-name-prefix = "MVC1";
+				status = "disabled";
+			};
+
+			tegra_mvc2: mvc@702da200 {
+				compatible = "nvidia,tegra210-mvc";
+				reg = <0x702da200 0x200>;
+				sound-name-prefix = "MVC2";
+				status = "disabled";
+			};
+
+			tegra_amixer: amixer@702dbb00 {
+				compatible = "nvidia,tegra210-amixer";
+				reg = <0x702dbb00 0x800>;
+				sound-name-prefix = "MIXER1";
+				status = "disabled";
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					xbar_admaif1_ep: endpoint {
+						remote-endpoint = <&admaif1_ep>;
+					};
+				};
+
+				port@1 {
+					reg = <0x1>;
+
+					xbar_admaif2_ep: endpoint {
+						remote-endpoint = <&admaif2_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <0x2>;
+
+					xbar_admaif3_ep: endpoint {
+						remote-endpoint = <&admaif3_ep>;
+					};
+				};
+
+				port@3 {
+					reg = <0x3>;
+
+					xbar_admaif4_ep: endpoint {
+						remote-endpoint = <&admaif4_ep>;
+					};
+				};
+
+				port@4 {
+					reg = <0x4>;
+					xbar_admaif5_ep: endpoint {
+						remote-endpoint = <&admaif5_ep>;
+					};
+				};
+				port@5 {
+					reg = <0x5>;
+
+					xbar_admaif6_ep: endpoint {
+						remote-endpoint = <&admaif6_ep>;
+					};
+				};
+
+				port@6 {
+					reg = <0x6>;
+
+					xbar_admaif7_ep: endpoint {
+						remote-endpoint = <&admaif7_ep>;
+					};
+				};
+
+				port@7 {
+					reg = <0x7>;
+
+					xbar_admaif8_ep: endpoint {
+						remote-endpoint = <&admaif8_ep>;
+					};
+				};
+
+				port@8 {
+					reg = <0x8>;
+
+					xbar_admaif9_ep: endpoint {
+						remote-endpoint = <&admaif9_ep>;
+					};
+				};
+
+				port@9 {
+					reg = <0x9>;
+
+					xbar_admaif10_ep: endpoint {
+						remote-endpoint = <&admaif10_ep>;
+					};
+				};
+			};
+		};
+
+		adma: dma-controller@702e2000 {
+			compatible = "nvidia,tegra210-adma";
+			reg = <0x702e2000 0x2000>;
+			interrupt-parent = <&agic>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+			clock-names = "d_audio";
+			status = "disabled";
+		};
+
+		agic: interrupt-controller@702f9000 {
+			compatible = "nvidia,tegra210-agic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x702f9000 0x1000>,
+			      <0x702fa000 0x2000>;
+			interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&tegra_car TEGRA210_CLK_APE>;
+			clock-names = "clk";
+			status = "disabled";
+		};
+	};
+
+	spi@70410000 {
+		compatible = "nvidia,tegra210-qspi";
+		reg = <0x0 0x70410000 0x0 0x1000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+			 <&tegra_car TEGRA210_CLK_QSPI_PM>;
+		clock-names = "qspi", "qspi_out";
+		resets = <&tegra_car 211>;
+		dmas = <&apbdma 5>, <&apbdma 5>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "usb";
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USBD>,
+			 <&tegra_car TEGRA210_CLK_PLL_U>,
+			 <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USB2>;
+		clock-names = "usb";
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USB2>,
+			 <&tegra_car TEGRA210_CLK_PLL_U>,
+			 <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0>;
+			clocks = <&tegra_car TEGRA210_CLK_CCLK_G>,
+				 <&tegra_car TEGRA210_CLK_PLL_X>,
+				 <&tegra_car TEGRA210_CLK_PLL_P_OUT4>,
+				 <&dfll>;
+			clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
+			clock-latency = <300000>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <1>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <3>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&L2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000007>;
+				entry-latency-us = <100>;
+				exit-latency-us = <30>;
+				min-residency-us = <1000>;
+				wakeup-latency-us = <130>;
+				idle-state-name = "cpu-sleep";
+				status = "disabled";
+			};
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0} &{/cpus/cpu@1}
+				      &{/cpus/cpu@2} &{/cpus/cpu@3}>;
+	};
+
+	sound {
+		status = "disabled";
+
+		clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+			 <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+		clock-names = "pll_a", "plla_out0";
+
+		assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+				  <&tegra_car TEGRA210_CLK_PLL_A_OUT0>,
+				  <&tegra_car TEGRA210_CLK_EXTERN1>;
+		assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+		assigned-clock-rates = <368640000>, <49152000>, <12288000>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <102500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <98500>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				dram_nominal: mem-nominal-trip {
+					temperature = <50000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				dram_throttle: mem-throttle-trip {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "active";
+				};
+
+				mem-hot-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				dram-passive {
+					cooling-device = <&emc 0 0>;
+					trip = <&dram_nominal>;
+				};
+
+				dram-active {
+					cooling-device = <&emc 1 1>;
+					trip = <&dram_throttle>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		pllx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				pllx-throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
new file mode 100644
index 0000000000..cb792041fc
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+#include "tegra234-p3701.dtsi"
+
+/ {
+	model = "NVIDIA Jetson AGX Orin";
+	compatible = "nvidia,p3701-0000", "nvidia,tegra234";
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <102000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+		};
+
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+		};
+
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
+
+			ports {
+				usb2-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-2 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8_ls: regulator-vdd-1v8-ls {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_LS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	vdd_12v_pcie: regulator-vdd-12v-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_12V_PCIE";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+	};
+
+	thermal-zones {
+		tj-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <1000>;
+			status = "okay";
+
+			trips {
+				tj_trip_active0: active-0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				tj_trip_active1: active-1 {
+					temperature = <95000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
new file mode 100644
index 0000000000..62c4fdad0b
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+#include "tegra234-p3701.dtsi"
+
+/ {
+	compatible = "nvidia,p3701-0008", "nvidia,tegra234";
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <102000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+		};
+
+		i2c@c240000 {
+			status = "okay";
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			thermal-sensor@4c {
+				status = "okay";
+				reg = <0x4c>;
+				vcc-supply = <&vdd_1v8_ao>;
+			};
+		};
+
+		thermal {
+			status = "okay";
+		};
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ls: regulator-vdd-1v8-ls {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_LS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-AO-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
new file mode 100644
index 0000000000..5e7797df50
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
@@ -0,0 +1,1991 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	compatible = "nvidia,p3701", "nvidia,tegra234";
+
+	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			ahub@2900800 {
+				status = "okay";
+
+				i2s@2901000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s1_cif: endpoint {
+								remote-endpoint = <&xbar_i2s1>;
+							};
+						};
+
+						i2s1_port: port@1 {
+							reg = <1>;
+
+							i2s1_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s2_cif: endpoint {
+								remote-endpoint = <&xbar_i2s2>;
+							};
+						};
+
+						i2s2_port: port@1 {
+							reg = <1>;
+
+							i2s2_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s4_cif: endpoint {
+								remote-endpoint = <&xbar_i2s4>;
+							};
+						};
+
+						i2s4_port: port@1 {
+							reg = <1>;
+
+							i2s4_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901500 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s6_cif: endpoint {
+								remote-endpoint = <&xbar_i2s6>;
+							};
+						};
+
+						i2s6_port: port@1 {
+							reg = <1>;
+
+							i2s6_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				sfc@2902000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc1_in>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc1_out>;
+							};
+						};
+					};
+				};
+
+				sfc@2902200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc2_in>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc2_out>;
+							};
+						};
+					};
+				};
+
+				sfc@2902400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc3_in>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc3_out>;
+							};
+						};
+					};
+				};
+
+				sfc@2902600 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc4_in>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc4_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1: endpoint {
+								remote-endpoint = <&xbar_amx1_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2: endpoint {
+								remote-endpoint = <&xbar_amx1_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3: endpoint {
+								remote-endpoint = <&xbar_amx1_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4: endpoint {
+								remote-endpoint = <&xbar_amx1_in4>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out: endpoint {
+								remote-endpoint = <&xbar_amx1_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1: endpoint {
+								remote-endpoint = <&xbar_amx2_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2: endpoint {
+								remote-endpoint = <&xbar_amx2_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx2_in3: endpoint {
+								remote-endpoint = <&xbar_amx2_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx2_in4: endpoint {
+								remote-endpoint = <&xbar_amx2_in4>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out: endpoint {
+								remote-endpoint = <&xbar_amx2_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1: endpoint {
+								remote-endpoint = <&xbar_amx3_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2: endpoint {
+								remote-endpoint = <&xbar_amx3_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3: endpoint {
+								remote-endpoint = <&xbar_amx3_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4: endpoint {
+								remote-endpoint = <&xbar_amx3_in4>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out: endpoint {
+								remote-endpoint = <&xbar_amx3_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1: endpoint {
+								remote-endpoint = <&xbar_amx4_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2: endpoint {
+								remote-endpoint = <&xbar_amx4_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3: endpoint {
+								remote-endpoint = <&xbar_amx4_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4: endpoint {
+								remote-endpoint = <&xbar_amx4_in4>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out: endpoint {
+								remote-endpoint = <&xbar_amx4_out>;
+							};
+						};
+					};
+				};
+
+				adx@2903800 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in: endpoint {
+								remote-endpoint = <&xbar_adx1_in>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1: endpoint {
+								remote-endpoint = <&xbar_adx1_out1>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2: endpoint {
+								remote-endpoint = <&xbar_adx1_out2>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3: endpoint {
+								remote-endpoint = <&xbar_adx1_out3>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4: endpoint {
+								remote-endpoint = <&xbar_adx1_out4>;
+							};
+						};
+					};
+				};
+
+				adx@2903900 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in: endpoint {
+								remote-endpoint = <&xbar_adx2_in>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1: endpoint {
+								remote-endpoint = <&xbar_adx2_out1>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2: endpoint {
+								remote-endpoint = <&xbar_adx2_out2>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3: endpoint {
+								remote-endpoint = <&xbar_adx2_out3>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4: endpoint {
+								remote-endpoint = <&xbar_adx2_out4>;
+							};
+						};
+					};
+				};
+
+				adx@2903a00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in: endpoint {
+								remote-endpoint = <&xbar_adx3_in>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1: endpoint {
+								remote-endpoint = <&xbar_adx3_out1>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2: endpoint {
+								remote-endpoint = <&xbar_adx3_out2>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3: endpoint {
+								remote-endpoint = <&xbar_adx3_out3>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4: endpoint {
+								remote-endpoint = <&xbar_adx3_out4>;
+							};
+						};
+					};
+				};
+
+				adx@2903b00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in: endpoint {
+								remote-endpoint = <&xbar_adx4_in>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1: endpoint {
+								remote-endpoint = <&xbar_adx4_out1>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2: endpoint {
+								remote-endpoint = <&xbar_adx4_out2>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3: endpoint {
+								remote-endpoint = <&xbar_adx4_out3>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4: endpoint {
+								remote-endpoint = <&xbar_adx4_out4>;
+							};
+						};
+					};
+				};
+
+				dmic@2904200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic3_cif: endpoint {
+								remote-endpoint = <&xbar_dmic3>;
+							};
+						};
+
+						dmic3_port: port@1 {
+							reg = <1>;
+
+							dmic3_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				processing-engine@2908000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc1_in>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc1_out>;
+							};
+						};
+					};
+				};
+
+				mvc@290a200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc2_in>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc2_out>;
+							};
+						};
+					};
+				};
+
+				amixer@290bb00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mix_in1: endpoint {
+								remote-endpoint = <&xbar_mix_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mix_in2: endpoint {
+								remote-endpoint = <&xbar_mix_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mix_in3: endpoint {
+								remote-endpoint = <&xbar_mix_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mix_in4: endpoint {
+								remote-endpoint = <&xbar_mix_in4>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mix_in5: endpoint {
+								remote-endpoint = <&xbar_mix_in5>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mix_in6: endpoint {
+								remote-endpoint = <&xbar_mix_in6>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mix_in7: endpoint {
+								remote-endpoint = <&xbar_mix_in7>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mix_in8: endpoint {
+								remote-endpoint = <&xbar_mix_in8>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mix_in9: endpoint {
+								remote-endpoint = <&xbar_mix_in9>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mix_in10: endpoint {
+								remote-endpoint = <&xbar_mix_in10>;
+							};
+						};
+
+						mix_out1_port: port@a {
+							reg = <0xa>;
+
+							mix_out1: endpoint {
+								remote-endpoint = <&xbar_mix_out1>;
+							};
+						};
+
+						mix_out2_port: port@b {
+							reg = <0xb>;
+
+							mix_out2: endpoint {
+								remote-endpoint = <&xbar_mix_out2>;
+							};
+						};
+
+						mix_out3_port: port@c {
+							reg = <0xc>;
+
+							mix_out3: endpoint {
+								remote-endpoint = <&xbar_mix_out3>;
+							};
+						};
+
+						mix_out4_port: port@d {
+							reg = <0xd>;
+
+							mix_out4: endpoint {
+								remote-endpoint = <&xbar_mix_out4>;
+							};
+						};
+
+						mix_out5_port: port@e {
+							reg = <0xe>;
+
+							mix_out5: endpoint {
+								remote-endpoint = <&xbar_mix_out5>;
+							};
+						};
+					};
+				};
+
+				admaif@290f000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0: endpoint {
+								remote-endpoint = <&xbar_admaif0>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1: endpoint {
+								remote-endpoint = <&xbar_admaif1>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2: endpoint {
+								remote-endpoint = <&xbar_admaif2>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3: endpoint {
+								remote-endpoint = <&xbar_admaif3>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4: endpoint {
+								remote-endpoint = <&xbar_admaif4>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5: endpoint {
+								remote-endpoint = <&xbar_admaif5>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6: endpoint {
+								remote-endpoint = <&xbar_admaif6>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7: endpoint {
+								remote-endpoint = <&xbar_admaif7>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8: endpoint {
+								remote-endpoint = <&xbar_admaif8>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9: endpoint {
+								remote-endpoint = <&xbar_admaif9>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10: endpoint {
+								remote-endpoint = <&xbar_admaif10>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11: endpoint {
+								remote-endpoint = <&xbar_admaif11>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12: endpoint {
+								remote-endpoint = <&xbar_admaif12>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13: endpoint {
+								remote-endpoint = <&xbar_admaif13>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14: endpoint {
+								remote-endpoint = <&xbar_admaif14>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15: endpoint {
+								remote-endpoint = <&xbar_admaif15>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16: endpoint {
+								remote-endpoint = <&xbar_admaif16>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17: endpoint {
+								remote-endpoint = <&xbar_admaif17>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18: endpoint {
+								remote-endpoint = <&xbar_admaif18>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19: endpoint {
+								remote-endpoint = <&xbar_admaif19>;
+							};
+						};
+					};
+				};
+
+				asrc@2910000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port:	port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0: endpoint {
+							remote-endpoint = <&admaif0>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1: endpoint {
+							remote-endpoint = <&admaif1>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2: endpoint {
+							remote-endpoint = <&admaif2>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3: endpoint {
+							remote-endpoint = <&admaif3>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4: endpoint {
+							remote-endpoint = <&admaif4>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5: endpoint {
+							remote-endpoint = <&admaif5>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6: endpoint {
+							remote-endpoint = <&admaif6>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7: endpoint {
+							remote-endpoint = <&admaif7>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8: endpoint {
+							remote-endpoint = <&admaif8>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9: endpoint {
+							remote-endpoint = <&admaif9>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10: endpoint {
+							remote-endpoint = <&admaif10>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11: endpoint {
+							remote-endpoint = <&admaif11>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12: endpoint {
+							remote-endpoint = <&admaif12>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13: endpoint {
+							remote-endpoint = <&admaif13>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14: endpoint {
+							remote-endpoint = <&admaif14>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15: endpoint {
+							remote-endpoint = <&admaif15>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16: endpoint {
+							remote-endpoint = <&admaif16>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17: endpoint {
+							remote-endpoint = <&admaif17>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18: endpoint {
+							remote-endpoint = <&admaif18>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19: endpoint {
+							remote-endpoint = <&admaif19>;
+						};
+					};
+
+					xbar_i2s1_port: port@14 {
+						reg = <0x14>;
+
+						xbar_i2s1: endpoint {
+							remote-endpoint = <&i2s1_cif>;
+						};
+					};
+
+					xbar_i2s2_port: port@15 {
+						reg = <0x15>;
+
+						xbar_i2s2: endpoint {
+							remote-endpoint = <&i2s2_cif>;
+						};
+					};
+
+					xbar_i2s4_port: port@17 {
+						reg = <0x17>;
+
+						xbar_i2s4: endpoint {
+							remote-endpoint = <&i2s4_cif>;
+						};
+					};
+
+					xbar_i2s6_port: port@19 {
+						reg = <0x19>;
+
+						xbar_i2s6: endpoint {
+							remote-endpoint = <&i2s6_cif>;
+						};
+					};
+
+					xbar_dmic3_port: port@1c {
+						reg = <0x1c>;
+
+						xbar_dmic3: endpoint {
+							remote-endpoint = <&dmic3_cif>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@20 {
+						reg = <0x20>;
+
+						xbar_sfc1_in: endpoint {
+							remote-endpoint = <&sfc1_cif_in>;
+						};
+					};
+
+					port@21 {
+						reg = <0x21>;
+
+						xbar_sfc1_out: endpoint {
+							remote-endpoint = <&sfc1_cif_out>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@22 {
+						reg = <0x22>;
+
+						xbar_sfc2_in: endpoint {
+							remote-endpoint = <&sfc2_cif_in>;
+						};
+					};
+
+					port@23 {
+						reg = <0x23>;
+
+						xbar_sfc2_out: endpoint {
+							remote-endpoint = <&sfc2_cif_out>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@24 {
+						reg = <0x24>;
+
+						xbar_sfc3_in: endpoint {
+							remote-endpoint = <&sfc3_cif_in>;
+						};
+					};
+
+					port@25 {
+						reg = <0x25>;
+
+						xbar_sfc3_out: endpoint {
+							remote-endpoint = <&sfc3_cif_out>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@26 {
+						reg = <0x26>;
+
+						xbar_sfc4_in: endpoint {
+							remote-endpoint = <&sfc4_cif_in>;
+						};
+					};
+
+					port@27 {
+						reg = <0x27>;
+
+						xbar_sfc4_out: endpoint {
+							remote-endpoint = <&sfc4_cif_out>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@28 {
+						reg = <0x28>;
+
+						xbar_mvc1_in: endpoint {
+							remote-endpoint = <&mvc1_cif_in>;
+						};
+					};
+
+					port@29 {
+						reg = <0x29>;
+
+						xbar_mvc1_out: endpoint {
+							remote-endpoint = <&mvc1_cif_out>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_mvc2_in: endpoint {
+							remote-endpoint = <&mvc2_cif_in>;
+						};
+					};
+
+					port@2b {
+						reg = <0x2b>;
+
+						xbar_mvc2_out: endpoint {
+							remote-endpoint = <&mvc2_cif_out>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@2c {
+						reg = <0x2c>;
+
+						xbar_amx1_in1: endpoint {
+							remote-endpoint = <&amx1_in1>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_amx1_in2: endpoint {
+							remote-endpoint = <&amx1_in2>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@2e {
+						reg = <0x2e>;
+
+						xbar_amx1_in3: endpoint {
+							remote-endpoint = <&amx1_in3>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_amx1_in4: endpoint {
+							remote-endpoint = <&amx1_in4>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_amx1_out: endpoint {
+							remote-endpoint = <&amx1_out>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@31 {
+						reg = <0x31>;
+
+						xbar_amx2_in1: endpoint {
+							remote-endpoint = <&amx2_in1>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@32 {
+						reg = <0x32>;
+
+						xbar_amx2_in2: endpoint {
+							remote-endpoint = <&amx2_in2>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@33 {
+						reg = <0x33>;
+
+						xbar_amx2_in3: endpoint {
+							remote-endpoint = <&amx2_in3>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@34 {
+						reg = <0x34>;
+
+						xbar_amx2_in4: endpoint {
+							remote-endpoint = <&amx2_in4>;
+						};
+					};
+
+					port@35 {
+						reg = <0x35>;
+
+						xbar_amx2_out: endpoint {
+							remote-endpoint = <&amx2_out>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@36 {
+						reg = <0x36>;
+
+						xbar_amx3_in1: endpoint {
+							remote-endpoint = <&amx3_in1>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx3_in2: endpoint {
+							remote-endpoint = <&amx3_in2>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx3_in3: endpoint {
+							remote-endpoint = <&amx3_in3>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx3_in4: endpoint {
+							remote-endpoint = <&amx3_in4>;
+						};
+					};
+
+					port@3a {
+						reg = <0x3a>;
+
+						xbar_amx3_out: endpoint {
+							remote-endpoint = <&amx3_out>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@3b {
+						reg = <0x3b>;
+
+						xbar_amx4_in1: endpoint {
+							remote-endpoint = <&amx4_in1>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx4_in2: endpoint {
+							remote-endpoint = <&amx4_in2>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx4_in3: endpoint {
+							remote-endpoint = <&amx4_in3>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx4_in4: endpoint {
+							remote-endpoint = <&amx4_in4>;
+						};
+					};
+
+					port@3f {
+						reg = <0x3f>;
+
+						xbar_amx4_out: endpoint {
+							remote-endpoint = <&amx4_out>;
+						};
+					};
+
+					xbar_adx1_in_port: port@40 {
+						reg = <0x40>;
+
+						xbar_adx1_in: endpoint {
+							remote-endpoint = <&adx1_in>;
+						};
+					};
+
+					port@41 {
+						reg = <0x41>;
+
+						xbar_adx1_out1: endpoint {
+							remote-endpoint = <&adx1_out1>;
+						};
+					};
+
+					port@42 {
+						reg = <0x42>;
+
+						xbar_adx1_out2: endpoint {
+							remote-endpoint = <&adx1_out2>;
+						};
+					};
+
+					port@43 {
+						reg = <0x43>;
+
+						xbar_adx1_out3: endpoint {
+							remote-endpoint = <&adx1_out3>;
+						};
+					};
+
+					port@44 {
+						reg = <0x44>;
+
+						xbar_adx1_out4: endpoint {
+							remote-endpoint = <&adx1_out4>;
+						};
+					};
+
+					xbar_adx2_in_port: port@45 {
+						reg = <0x45>;
+
+						xbar_adx2_in: endpoint {
+							remote-endpoint = <&adx2_in>;
+						};
+					};
+
+					port@46 {
+						reg = <0x46>;
+
+						xbar_adx2_out1: endpoint {
+							remote-endpoint = <&adx2_out1>;
+						};
+					};
+
+					port@47 {
+						reg = <0x47>;
+
+						xbar_adx2_out2: endpoint {
+							remote-endpoint = <&adx2_out2>;
+						};
+					};
+
+					port@48 {
+						reg = <0x48>;
+
+						xbar_adx2_out3: endpoint {
+							remote-endpoint = <&adx2_out3>;
+						};
+					};
+
+					port@49 {
+						reg = <0x49>;
+
+						xbar_adx2_out4: endpoint {
+							remote-endpoint = <&adx2_out4>;
+						};
+					};
+
+					xbar_adx3_in_port: port@4a {
+						reg = <0x4a>;
+
+						xbar_adx3_in: endpoint {
+							remote-endpoint = <&adx3_in>;
+						};
+					};
+
+					port@4b {
+						reg = <0x4b>;
+
+						xbar_adx3_out1: endpoint {
+							remote-endpoint = <&adx3_out1>;
+						};
+					};
+
+					port@4c {
+						reg = <0x4c>;
+
+						xbar_adx3_out2: endpoint {
+							remote-endpoint = <&adx3_out2>;
+						};
+					};
+
+					port@4d {
+						reg = <0x4d>;
+
+						xbar_adx3_out3: endpoint {
+							remote-endpoint = <&adx3_out3>;
+						};
+					};
+
+					port@4e {
+						reg = <0x4e>;
+
+						xbar_adx3_out4: endpoint {
+							remote-endpoint = <&adx3_out4>;
+						};
+					};
+
+					xbar_adx4_in_port: port@4f {
+						reg = <0x4f>;
+
+						xbar_adx4_in: endpoint {
+							remote-endpoint = <&adx4_in>;
+						};
+					};
+
+					port@50 {
+						reg = <0x50>;
+
+						xbar_adx4_out1: endpoint {
+							remote-endpoint = <&adx4_out1>;
+						};
+					};
+
+					port@51 {
+						reg = <0x51>;
+
+						xbar_adx4_out2: endpoint {
+							remote-endpoint = <&adx4_out2>;
+						};
+					};
+
+					port@52 {
+						reg = <0x52>;
+
+						xbar_adx4_out3: endpoint {
+							remote-endpoint = <&adx4_out3>;
+						};
+					};
+
+					port@53 {
+						reg = <0x53>;
+
+						xbar_adx4_out4: endpoint {
+							remote-endpoint = <&adx4_out4>;
+						};
+					};
+
+					xbar_mix_in1_port: port@54 {
+						reg = <0x54>;
+
+						xbar_mix_in1: endpoint {
+							remote-endpoint = <&mix_in1>;
+						};
+					};
+
+					xbar_mix_in2_port: port@55 {
+						reg = <0x55>;
+
+						xbar_mix_in2: endpoint {
+							remote-endpoint = <&mix_in2>;
+						};
+					};
+
+					xbar_mix_in3_port: port@56 {
+						reg = <0x56>;
+
+						xbar_mix_in3: endpoint {
+							remote-endpoint = <&mix_in3>;
+						};
+					};
+
+					xbar_mix_in4_port: port@57 {
+						reg = <0x57>;
+
+						xbar_mix_in4: endpoint {
+							remote-endpoint = <&mix_in4>;
+						};
+					};
+
+					xbar_mix_in5_port: port@58 {
+						reg = <0x58>;
+
+						xbar_mix_in5: endpoint {
+							remote-endpoint = <&mix_in5>;
+						};
+					};
+
+					xbar_mix_in6_port: port@59 {
+						reg = <0x59>;
+
+						xbar_mix_in6: endpoint {
+							remote-endpoint = <&mix_in6>;
+						};
+					};
+
+					xbar_mix_in7_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_mix_in7: endpoint {
+							remote-endpoint = <&mix_in7>;
+						};
+					};
+
+					xbar_mix_in8_port: port@5b {
+						reg = <0x5b>;
+
+						xbar_mix_in8: endpoint {
+							remote-endpoint = <&mix_in8>;
+						};
+					};
+
+					xbar_mix_in9_port: port@5c {
+						reg = <0x5c>;
+
+						xbar_mix_in9: endpoint {
+							remote-endpoint = <&mix_in9>;
+						};
+					};
+
+					xbar_mix_in10_port: port@5d {
+						reg = <0x5d>;
+
+						xbar_mix_in10: endpoint {
+							remote-endpoint = <&mix_in10>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_mix_out1: endpoint {
+							remote-endpoint = <&mix_out1>;
+						};
+					};
+
+					port@5f {
+						reg = <0x5f>;
+
+						xbar_mix_out2: endpoint {
+							remote-endpoint = <&mix_out2>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_mix_out3: endpoint {
+							remote-endpoint = <&mix_out3>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_mix_out4: endpoint {
+							remote-endpoint = <&mix_out4>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_mix_out5: endpoint {
+							remote-endpoint = <&mix_out5>;
+						};
+					};
+
+					xbar_asrc_in1_port: port@63 {
+						reg = <0x63>;
+
+						xbar_asrc_in1_ep: endpoint {
+							remote-endpoint = <&asrc_in1_ep>;
+						};
+					};
+
+					port@64 {
+						reg = <0x64>;
+
+						xbar_asrc_out1_ep: endpoint {
+							remote-endpoint = <&asrc_out1_ep>;
+						};
+					};
+
+					xbar_asrc_in2_port: port@65 {
+						reg = <0x65>;
+
+						xbar_asrc_in2_ep: endpoint {
+							remote-endpoint = <&asrc_in2_ep>;
+						};
+					};
+
+					port@66 {
+						reg = <0x66>;
+
+						xbar_asrc_out2_ep: endpoint {
+							remote-endpoint = <&asrc_out2_ep>;
+						};
+					};
+
+					xbar_asrc_in3_port: port@67 {
+						reg = <0x67>;
+
+						xbar_asrc_in3_ep: endpoint {
+							remote-endpoint = <&asrc_in3_ep>;
+						};
+					};
+
+					port@68 {
+						reg = <0x68>;
+
+						xbar_asrc_out3_ep: endpoint {
+							remote-endpoint = <&asrc_out3_ep>;
+						};
+					};
+
+					xbar_asrc_in4_port: port@69 {
+						reg = <0x69>;
+
+						xbar_asrc_in4_ep: endpoint {
+							remote-endpoint = <&asrc_in4_ep>;
+						};
+					};
+
+					port@6a {
+						reg = <0x6a>;
+
+						xbar_asrc_out4_ep: endpoint {
+							remote-endpoint = <&asrc_out4_ep>;
+						};
+					};
+
+					xbar_asrc_in5_port: port@6b {
+						reg = <0x6b>;
+
+						xbar_asrc_in5_ep: endpoint {
+							remote-endpoint = <&asrc_in5_ep>;
+						};
+					};
+
+					port@6c {
+						reg = <0x6c>;
+
+						xbar_asrc_out5_ep: endpoint {
+							remote-endpoint = <&asrc_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in6_port: port@6d {
+						reg = <0x6d>;
+
+						xbar_asrc_in6_ep: endpoint {
+							remote-endpoint = <&asrc_in6_ep>;
+						};
+					};
+
+					port@6e {
+						reg = <0x6e>;
+
+						xbar_asrc_out6_ep: endpoint {
+							remote-endpoint = <&asrc_out6_ep>;
+						};
+					};
+
+					xbar_asrc_in7_port: port@6f {
+						reg = <0x6f>;
+
+						xbar_asrc_in7_ep: endpoint {
+							remote-endpoint = <&asrc_in7_ep>;
+						};
+					};
+
+					xbar_ope1_in_port: port@70 {
+						reg = <0x70>;
+
+						xbar_ope1_in_ep: endpoint {
+							remote-endpoint = <&ope1_cif_in_ep>;
+						};
+					};
+
+					port@71 {
+						reg = <0x71>;
+
+						xbar_ope1_out_ep: endpoint {
+							remote-endpoint = <&ope1_cif_out_ep>;
+						};
+					};
+				};
+			};
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
new file mode 100644
index 0000000000..4413a9b6da
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra234-p3701-0000.dtsi"
+#include "tegra234-p3737-0000.dtsi"
+
+/ {
+	model = "NVIDIA Jetson AGX Orin Developer Kit";
+	compatible = "nvidia,p3737-0000+p3701-0000", "nvidia,p3701-0000", "nvidia,tegra234";
+
+	aliases {
+		mmc3 = "/bus@0/mmc@3460000";
+		serial0 = &tcu;
+		serial1 = &uarta;
+	};
+
+	chosen {
+		bootargs = "console=ttyTCU0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		serial@3100000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		serial@31d0000 {
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson AGX Orin HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-2 {
+							status = "okay";
+						};
+
+						usb2-3 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							status = "okay";
+						};
+
+						usb3-1 {
+							status = "okay";
+						};
+
+						usb3-2 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "otg";
+					usb-role-switch;
+					status = "okay";
+
+					port {
+						hs_typec_p1: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p1>;
+						};
+					};
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+
+					port {
+						hs_typec_p0: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p0>;
+						};
+					};
+				};
+
+				usb2-2 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+
+					port {
+						ss_typec_p0: endpoint {
+							remote-endpoint = <&ss_ucsi_ccg_p0>;
+						};
+					};
+				};
+
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+
+					port {
+						ss_typec_p1: endpoint {
+							remote-endpoint = <&ss_ucsi_ccg_p1>;
+						};
+					};
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <3>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
+				    "usb3-0", "usb3-1", "usb3-2";
+		};
+
+		ethernet@6800000 {
+			status = "okay";
+
+			phy-handle = <&mgbe0_phy>;
+			phy-mode = "usxgmii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mgbe0_phy: phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		i2c@c240000 {
+			status = "okay";
+
+			typec@8 {
+				compatible = "cypress,cypd4226";
+				reg = <0x08>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
+				firmware-name = "nvidia,jetson-agx-xavier";
+				status = "okay";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ccg_typec_con0: connector@0 {
+					compatible = "usb-c-connector";
+					reg = <0>;
+					label = "USB-C";
+					data-role = "host";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							hs_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&hs_typec_p0>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ss_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&ss_typec_p0>;
+							};
+						};
+					};
+				};
+
+				ccg_typec_con1: connector@1 {
+					compatible = "usb-c-connector";
+					reg = <1>;
+					label = "USB-C";
+					data-role = "dual";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							hs_ucsi_ccg_p1: endpoint {
+								remote-endpoint = <&hs_typec_p1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ss_ucsi_ccg_p1: endpoint {
+								remote-endpoint = <&ss_typec_p1>;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+			       <&p2u_hsio_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+			vpcie12v-supply = <&vdd_12v_pcie>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie-ep@141a0000 {
+			status = "disabled";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+
+			reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+			nvidia,refclk-select-gpios = <&gpio_aon
+						      TEGRA234_AON_GPIO(AA, 4)
+						      GPIO_ACTIVE_HIGH>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	pwm-fan {
+		cooling-levels = <66 215 255>;
+	};
+
+	serial {
+		status = "okay";
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_i2s6_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
+		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
+		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
+		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
+		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
+		       <&mix_out4_port>, <&mix_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
+		       <&dmic3_port>;
+
+		label = "NVIDIA Jetson AGX Orin APE";
+
+		widgets = "Microphone",	"CVB-RT MIC Jack",
+			  "Microphone",	"CVB-RT MIC",
+			  "Headphone",	"CVB-RT HP Jack",
+			  "Speaker",	"CVB-RT SPK";
+
+		routing = /* I2S1 <-> RT5640 */
+			  "CVB-RT AIF1 Playback",	"I2S1 DAP-Playback",
+			  "I2S1 DAP-Capture",		"CVB-RT AIF1 Capture",
+			  /* RT5640 codec controls */
+			  "CVB-RT HP Jack",		"CVB-RT HPOL",
+			  "CVB-RT HP Jack",		"CVB-RT HPOR",
+			  "CVB-RT IN1P",		"CVB-RT MIC Jack",
+			  "CVB-RT IN2P",		"CVB-RT MIC Jack",
+			  "CVB-RT SPK",			"CVB-RT SPOLP",
+			  "CVB-RT SPK",			"CVB-RT SPORP",
+			  "CVB-RT DMIC1",		"CVB-RT MIC",
+			  "CVB-RT DMIC2",		"CVB-RT MIC";
+	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
new file mode 100644
index 0000000000..eb79e80a98
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/sound/rt5640.h>
+
+/ {
+	compatible = "nvidia,p3737-0000";
+
+	bus@0 {
+		aconnect@2900000 {
+			ahub@2900800 {
+				i2s@2901000 {
+					ports {
+						port@1 {
+							endpoint {
+								dai-format = "i2s";
+								remote-endpoint = <&rt5640_ep>;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@56 {
+				compatible = "atmel,24c02";
+				reg = <0x56>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8_sys>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		i2c@31e0000 {
+			status = "okay";
+
+			audio-codec@1c {
+				compatible = "realtek,rt5640";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+				clock-names = "mclk";
+				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+				realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+				realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+				sound-name-prefix = "CVB-RT";
+
+				port {
+					rt5640_ep: endpoint {
+						remote-endpoint = <&i2s1_dap>;
+						mclk-fs = <256>;
+					};
+				};
+			};
+		};
+
+		pwm@3280000 {
+			status = "okay";
+		};
+
+		pwm@32c0000 {
+			status = "okay";
+		};
+
+		pwm@32f0000 {
+			status = "okay";
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm3 0 45334>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_1v8_sys: regulator-vdd-1v8-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_SYS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
new file mode 100644
index 0000000000..bac611d735
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include "tegra234-p3701-0008.dtsi"
+#include "tegra234-p3740-0002.dtsi"
+
+/ {
+	model = "NVIDIA IGX Orin Development Kit";
+	compatible = "nvidia,p3740-0002+p3701-0008", "nvidia,p3701-0008", "nvidia,tegra234";
+
+	aliases {
+		serial0 = &tcu;
+		serial1 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		serial@3100000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		i2c@3160000 {
+			status = "okay";
+		};
+
+		i2c@3180000 {
+			status = "okay";
+		};
+
+		i2c@3190000 {
+			status = "okay";
+		};
+
+		i2c@31b0000 {
+			status = "okay";
+		};
+
+		i2c@31c0000 {
+			status = "okay";
+
+		};
+
+		i2c@31e0000 {
+			status = "okay";
+		};
+
+		spi@3270000 {
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA IGX Orin HDA";
+			status = "okay";
+		};
+
+		fuse@3810000 {
+			status = "okay";
+		};
+
+		i2c@c240000 {
+			status = "okay";
+		};
+
+		i2c@c250000 {
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			nvdec@15480000 {
+				status = "okay";
+			};
+		};
+
+		pcie@140e0000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			phys = <&p2u_gbe_4>, <&p2u_gbe_5>;
+			phy-names = "p2u-0", "p2u-1";
+		};
+
+		pcie@14100000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+			vpcie3v3-supply = <&vdd_3v3_wifi>;
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14160000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+			phys = <&p2u_hsio_7>, <&p2u_hsio_6>, <&p2u_hsio_5>,
+			       <&p2u_hsio_4>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+				<&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+				<&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie@141e0000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			phys = <&p2u_gbe_0>, <&p2u_gbe_1>;
+			phy-names = "p2u-0", "p2u-1";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	serial {
+		status = "okay";
+	};
+
+	sound {
+		status = "okay";
+
+		compatible = "nvidia,tegra186-audio-graph-card";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_i2s6_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
+		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
+		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
+		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
+		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
+		       <&mix_out4_port>, <&mix_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
+		       <&dmic3_port>;
+
+		label = "NVIDIA IGX Orin APE";
+
+		widgets = "Microphone",	"CVB-RT MIC Jack",
+			  "Microphone",	"CVB-RT MIC",
+			  "Headphone",	"CVB-RT HP Jack",
+			  "Speaker",	"CVB-RT SPK";
+
+		routing = /* I2S4 <-> RT5640 */
+			  "CVB-RT AIF1 Playback",	"I2S4 DAP-Playback",
+			  "I2S4 DAP-Capture",		"CVB-RT AIF1 Capture",
+			  /* RT5640 codec controls */
+			  "CVB-RT HP Jack",		"CVB-RT HPOL",
+			  "CVB-RT HP Jack",		"CVB-RT HPOR",
+			  "CVB-RT IN1P",		"CVB-RT MIC Jack",
+			  "CVB-RT IN2P",		"CVB-RT MIC Jack",
+			  "CVB-RT IN2N",		"CVB-RT MIC Jack",
+			  "CVB-RT IN3P",		"CVB-RT MIC Jack",
+			  "CVB-RT SPK",			"CVB-RT SPOLP",
+			  "CVB-RT SPK",			"CVB-RT SPORP",
+			  "CVB-RT SPK",			"CVB-RT LOUTL",
+			  "CVB-RT SPK",			"CVB-RT LOUTR",
+			  "CVB-RT DMIC1",		"CVB-RT MIC",
+			  "CVB-RT DMIC2",		"CVB-RT MIC";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi
new file mode 100644
index 0000000000..527f2f3aee
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/sound/rt5640.h>
+
+/ {
+	compatible = "nvidia,p3740-0002";
+
+	bus@0 {
+		aconnect@2900000 {
+			ahub@2900800 {
+				i2s@2901300 {
+					ports {
+						port@1 {
+							endpoint {
+								dai-format = "i2s";
+								remote-endpoint = <&rt5640_ep>;
+							};
+						};
+					};
+				};
+
+				i2s@2901500 {
+					ports {
+						port@1 {
+							endpoint {
+								bitclock-master;
+								frame-master;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		i2c@31c0000 {
+			rt5640: audio-codec@1c {
+				compatible = "realtek,rt5640";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+				clock-names = "mclk";
+
+				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+				realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+				realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+
+				sound-name-prefix = "CVB-RT";
+
+				port {
+					rt5640_ep: endpoint {
+						remote-endpoint = <&i2s4_dap>;
+						mclk-fs = <256>;
+					};
+				};
+			};
+
+			/* carrier board ID EEPROM */
+			eeprom@55 {
+				compatible = "atmel,24c02";
+				reg = <0x55>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8_ls>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "otg";
+					usb-role-switch;
+					status = "okay";
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-2 {
+					mode = "host";
+					status = "okay";
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <2>;
+					status = "okay";
+				};
+
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
+				"usb3-0", "usb3-1", "usb3-2";
+		};
+	};
+
+	vdd_3v3_dp: regulator-vdd-3v3-dp {
+				compatible = "regulator-fixed";
+				regulator-name = "VDD_3V3_DP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&vdd_3v3_sys>;
+				gpio = <&gpio TEGRA234_MAIN_GPIO(H, 6) 0>;
+				enable-active-high;
+				regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+				compatible = "regulator-fixed";
+				regulator-name = "VDD_3V3_SYS";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_3v3_wifi: regulator-vdd-3v3-wifi {
+				compatible = "regulator-fixed";
+				regulator-name = "VDD_3V3_WIFI";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				gpio = <&gpio TEGRA234_MAIN_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+				regulator-boot-on;
+				enable-active-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
new file mode 100644
index 0000000000..baf4f69e41
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234-p3767.dtsi"
+
+/ {
+	compatible = "nvidia,p3767-0000", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin NX";
+
+	bus@0 {
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin NX HDA";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi
new file mode 100644
index 0000000000..232fa95ef4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234-p3767.dtsi"
+
+/ {
+	compatible = "nvidia,p3767-0005", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin Nano";
+
+	bus@0 {
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin Nano HDA";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
new file mode 100644
index 0000000000..fe08e131b7
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+
+/ {
+	compatible = "nvidia,p3767", "nvidia,tegra234";
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <102000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		/*
+		 * This only exists on Jetson Orin Nano Developer Kit (SKU 5)
+		 * but UEFI needs this and will remove it on devices where it
+		 * doesn't exist.
+		 */
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+		};
+
+		hda@3510000 {
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <33000000>;
+		regulator-max-microvolt = <33000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	thermal-zones {
+		tj-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <1000>;
+			status = "okay";
+
+			trips {
+				tj_trip_active0: active-0 {
+					temperature = <35000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				tj_trip_active1: active-1 {
+					temperature = <74000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				tj_trip_active2: active-2 {
+					temperature = <95000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
new file mode 100644
index 0000000000..e9460aedd4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra234-p3767-0000.dtsi"
+#include "tegra234-p3768-0000.dtsi"
+
+/ {
+	compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit";
+
+	aliases {
+		serial0 = &tcu;
+		serial1 = &uarta;
+		serial2 = &uarte;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		serial@3100000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		serial@3140000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		serial@31d0000 {
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin NX HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	pwm-fan {
+		cooling-levels = <0 88 187 255>;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	serial {
+		status = "okay";
+	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+
+				map-active-2 {
+					cooling-device = <&fan 2 3>;
+					trip = <&tj_trip_active2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts
new file mode 100644
index 0000000000..9e9bb9ca8b
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra234-p3767-0005.dtsi"
+#include "tegra234-p3768-0000.dtsi"
+
+/ {
+	compatible = "nvidia,p3768-0000+p3767-0005", "nvidia,p3767-0005", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin Nano Developer Kit";
+
+	pwm-fan {
+		cooling-levels = <0 88 187 255>;
+	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+
+				map-active-2 {
+					cooling-device = <&fan 2 3>;
+					trip = <&tj_trip_active2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
new file mode 100644
index 0000000000..39110c1232
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	compatible = "nvidia,p3768-0000";
+
+	aliases {
+		serial0 = &tcu;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8_sys>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		serial@31d0000 {
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				/* recovery port */
+				usb2-0 {
+					mode = "otg";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+					usb-role-switch;
+				};
+
+				/* hub */
+				usb2-1 {
+					mode = "host";
+					vbus-supply = <&vdd_1v1_hub>;
+					status = "okay";
+				};
+
+				/* M.2 Key-E */
+				usb2-2 {
+					mode = "host";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+
+				/* hub */
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+
+				/* J5 */
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0",
+				    "usb3-1";
+		};
+
+		/* C8 - Ethernet */
+		pcie@140a0000 {
+			status = "okay";
+
+			num-lanes = <2>;
+
+			phys = <&p2u_gbe_2>, <&p2u_gbe_3>;
+			phy-names = "p2u-0", "p2u-1";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+		};
+
+		/* C1 - M.2 Key-E */
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		/* C4 - M.2 Key-M */
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+			       <&p2u_hsio_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		/* C7 - M.2 Key-M */
+		pcie@141e0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_gbe_0>, <&p2u_gbe_1>;
+			phy-names = "p2u-0", "p2u-1";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm3 0 45334>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_1v8_sys: regulator-vdd-1v8-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_SYS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v1_hub: regulator-vdd-1v1-hub {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_AV10_HUB";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vdd_5v0_sys>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	serial {
+		status = "okay";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
new file mode 100644
index 0000000000..9f3e9f30c3
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra234.dtsi"
+
+/ {
+	model = "NVIDIA Tegra234 VDK";
+	compatible = "nvidia,tegra234-vdk", "nvidia,tegra234";
+
+	aliases {
+		mmc3 = "/bus@0/mmc@3460000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x03100000";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		serial@3100000 {
+			/delete-property/ dmas;
+			/delete-property/ dma-names;
+			status = "okay";
+		};
+
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
new file mode 100644
index 0000000000..ac69eacf8a
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -0,0 +1,4099 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra234-clock.h>
+#include <dt-bindings/gpio/tegra234-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/memory/tegra234-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+#include <dt-bindings/power/tegra234-powergate.h>
+#include <dt-bindings/reset/tegra234-reset.h>
+#include <dt-bindings/thermal/tegra234-bpmp-thermal.h>
+
+/ {
+	compatible = "nvidia,tegra234";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	bus@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		misc@100000 {
+			compatible = "nvidia,tegra234-misc";
+			reg = <0x0 0x00100000 0x0 0xf000>,
+			      <0x0 0x0010f000 0x0 0x1000>;
+			status = "okay";
+		};
+
+		timer@2080000 {
+			compatible = "nvidia,tegra234-timer";
+			reg = <0x0 0x02080000 0x0 0x00121000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		gpio: gpio@2200000 {
+			compatible = "nvidia,tegra234-gpio";
+			reg-names = "security", "gpio";
+			reg = <0x0 0x02200000 0x0 0x10000>,
+			      <0x0 0x02210000 0x0 0x10000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pinmux 0 0 164>;
+		};
+
+		pinmux: pinmux@2430000 {
+			compatible = "nvidia,tegra234-pinmux";
+			reg = <0x0 0x2430000 0x0 0x19100>;
+		};
+
+		gpcdma: dma-controller@2600000 {
+			compatible = "nvidia,tegra234-gpcdma",
+				     "nvidia,tegra186-gpcdma";
+			reg = <0x0 0x2600000 0x0 0x210000>;
+			resets = <&bpmp TEGRA234_RESET_GPCDMA>;
+			reset-names = "gpcdma";
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			dma-channel-mask = <0xfffffffe>;
+			dma-coherent;
+		};
+
+		aconnect@2900000 {
+			compatible = "nvidia,tegra234-aconnect",
+				     "nvidia,tegra210-aconnect";
+			clocks = <&bpmp TEGRA234_CLK_APE>,
+				 <&bpmp TEGRA234_CLK_APB2APE>;
+			clock-names = "ape", "apb2ape";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_AUD>;
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>;
+
+			tegra_ahub: ahub@2900800 {
+				compatible = "nvidia,tegra234-ahub";
+				reg = <0x0 0x02900800 0x0 0x800>;
+				clocks = <&bpmp TEGRA234_CLK_AHUB>;
+				clock-names = "ahub";
+				assigned-clocks = <&bpmp TEGRA234_CLK_AHUB>;
+				assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+				assigned-clock-rates = <81600000>;
+				status = "disabled";
+
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>;
+
+				tegra_i2s1: i2s@2901000 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901000 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S1>,
+						 <&bpmp TEGRA234_CLK_I2S1_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S1";
+					status = "disabled";
+				};
+
+				tegra_i2s2: i2s@2901100 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901100 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S2>,
+						 <&bpmp TEGRA234_CLK_I2S2_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S2";
+					status = "disabled";
+				};
+
+				tegra_i2s3: i2s@2901200 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901200 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S3>,
+						 <&bpmp TEGRA234_CLK_I2S3_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S3>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S3";
+					status = "disabled";
+				};
+
+				tegra_i2s4: i2s@2901300 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901300 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S4>,
+						 <&bpmp TEGRA234_CLK_I2S4_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S4>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S4";
+					status = "disabled";
+				};
+
+				tegra_i2s5: i2s@2901400 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901400 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S5>,
+						 <&bpmp TEGRA234_CLK_I2S5_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S5>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S5";
+					status = "disabled";
+				};
+
+				tegra_i2s6: i2s@2901500 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901500 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S6>,
+						 <&bpmp TEGRA234_CLK_I2S6_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S6>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S6";
+					status = "disabled";
+				};
+
+				tegra_sfc1: sfc@2902000 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902000 0x0 0x200>;
+					sound-name-prefix = "SFC1";
+					status = "disabled";
+				};
+
+				tegra_sfc2: sfc@2902200 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902200 0x0 0x200>;
+					sound-name-prefix = "SFC2";
+					status = "disabled";
+				};
+
+				tegra_sfc3: sfc@2902400 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902400 0x0 0x200>;
+					sound-name-prefix = "SFC3";
+					status = "disabled";
+				};
+
+				tegra_sfc4: sfc@2902600 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902600 0x0 0x200>;
+					sound-name-prefix = "SFC4";
+					status = "disabled";
+				};
+
+				tegra_amx1: amx@2903000 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903000 0x0 0x100>;
+					sound-name-prefix = "AMX1";
+					status = "disabled";
+				};
+
+				tegra_amx2: amx@2903100 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903100 0x0 0x100>;
+					sound-name-prefix = "AMX2";
+					status = "disabled";
+				};
+
+				tegra_amx3: amx@2903200 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903200 0x0 0x100>;
+					sound-name-prefix = "AMX3";
+					status = "disabled";
+				};
+
+				tegra_amx4: amx@2903300 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903300 0x0 0x100>;
+					sound-name-prefix = "AMX4";
+					status = "disabled";
+				};
+
+				tegra_adx1: adx@2903800 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903800 0x0 0x100>;
+					sound-name-prefix = "ADX1";
+					status = "disabled";
+				};
+
+				tegra_adx2: adx@2903900 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903900 0x0 0x100>;
+					sound-name-prefix = "ADX2";
+					status = "disabled";
+				};
+
+				tegra_adx3: adx@2903a00 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903a00 0x0 0x100>;
+					sound-name-prefix = "ADX3";
+					status = "disabled";
+				};
+
+				tegra_adx4: adx@2903b00 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903b00 0x0 0x100>;
+					sound-name-prefix = "ADX4";
+					status = "disabled";
+				};
+
+
+				tegra_dmic1: dmic@2904000 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904000 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC1>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC1";
+					status = "disabled";
+				};
+
+				tegra_dmic2: dmic@2904100 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904100 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC2>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC2";
+					status = "disabled";
+				};
+
+				tegra_dmic3: dmic@2904200 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904200 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC3>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC3>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC3";
+					status = "disabled";
+				};
+
+				tegra_dmic4: dmic@2904300 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904300 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC4>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC4>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC4";
+					status = "disabled";
+				};
+
+				tegra_dspk1: dspk@2905000 {
+					compatible = "nvidia,tegra234-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905000 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DSPK1>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK1";
+					status = "disabled";
+				};
+
+				tegra_dspk2: dspk@2905100 {
+					compatible = "nvidia,tegra234-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905100 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DSPK2>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK2";
+					status = "disabled";
+				};
+
+				tegra_ope1: processing-engine@2908000 {
+					compatible = "nvidia,tegra234-ope",
+						     "nvidia,tegra210-ope";
+					reg = <0x0 0x2908000 0x0 0x100>;
+					sound-name-prefix = "OPE1";
+					status = "disabled";
+
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					equalizer@2908100 {
+						compatible = "nvidia,tegra234-peq",
+							     "nvidia,tegra210-peq";
+						reg = <0x0 0x2908100 0x0 0x100>;
+					};
+
+					dynamic-range-compressor@2908200 {
+						compatible = "nvidia,tegra234-mbdrc",
+							     "nvidia,tegra210-mbdrc";
+						reg = <0x0 0x2908200 0x0 0x200>;
+					};
+				};
+
+				tegra_mvc1: mvc@290a000 {
+					compatible = "nvidia,tegra234-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a000 0x0 0x200>;
+					sound-name-prefix = "MVC1";
+					status = "disabled";
+				};
+
+				tegra_mvc2: mvc@290a200 {
+					compatible = "nvidia,tegra234-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a200 0x0 0x200>;
+					sound-name-prefix = "MVC2";
+					status = "disabled";
+				};
+
+				tegra_amixer: amixer@290bb00 {
+					compatible = "nvidia,tegra234-amixer",
+						     "nvidia,tegra210-amixer";
+					reg = <0x0 0x290bb00 0x0 0x800>;
+					sound-name-prefix = "MIXER1";
+					status = "disabled";
+				};
+
+				tegra_admaif: admaif@290f000 {
+					compatible = "nvidia,tegra234-admaif",
+						     "nvidia,tegra186-admaif";
+					reg = <0x0 0x0290f000 0x0 0x1000>;
+					dmas = <&adma 1>, <&adma 1>,
+					       <&adma 2>, <&adma 2>,
+					       <&adma 3>, <&adma 3>,
+					       <&adma 4>, <&adma 4>,
+					       <&adma 5>, <&adma 5>,
+					       <&adma 6>, <&adma 6>,
+					       <&adma 7>, <&adma 7>,
+					       <&adma 8>, <&adma 8>,
+					       <&adma 9>, <&adma 9>,
+					       <&adma 10>, <&adma 10>,
+					       <&adma 11>, <&adma 11>,
+					       <&adma 12>, <&adma 12>,
+					       <&adma 13>, <&adma 13>,
+					       <&adma 14>, <&adma 14>,
+					       <&adma 15>, <&adma 15>,
+					       <&adma 16>, <&adma 16>,
+					       <&adma 17>, <&adma 17>,
+					       <&adma 18>, <&adma 18>,
+					       <&adma 19>, <&adma 19>,
+					       <&adma 20>, <&adma 20>;
+					dma-names = "rx1", "tx1",
+						    "rx2", "tx2",
+						    "rx3", "tx3",
+						    "rx4", "tx4",
+						    "rx5", "tx5",
+						    "rx6", "tx6",
+						    "rx7", "tx7",
+						    "rx8", "tx8",
+						    "rx9", "tx9",
+						    "rx10", "tx10",
+						    "rx11", "tx11",
+						    "rx12", "tx12",
+						    "rx13", "tx13",
+						    "rx14", "tx14",
+						    "rx15", "tx15",
+						    "rx16", "tx16",
+						    "rx17", "tx17",
+						    "rx18", "tx18",
+						    "rx19", "tx19",
+						    "rx20", "tx20";
+					interconnects = <&mc TEGRA234_MEMORY_CLIENT_APEDMAR &emc>,
+							<&mc TEGRA234_MEMORY_CLIENT_APEDMAW &emc>;
+					interconnect-names = "dma-mem", "write";
+					iommus = <&smmu_niso0 TEGRA234_SID_APE>;
+					status = "disabled";
+				};
+
+				tegra_asrc: asrc@2910000 {
+					compatible = "nvidia,tegra234-asrc",
+						     "nvidia,tegra186-asrc";
+					reg = <0x0 0x2910000 0x0 0x2000>;
+					sound-name-prefix = "ASRC1";
+					status = "disabled";
+				};
+			};
+
+			adma: dma-controller@2930000 {
+				compatible = "nvidia,tegra234-adma",
+					     "nvidia,tegra186-adma";
+				reg = <0x0 0x02930000 0x0 0x20000>;
+				interrupt-parent = <&agic>;
+				interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				clocks = <&bpmp TEGRA234_CLK_AHUB>;
+				clock-names = "d_audio";
+				status = "disabled";
+			};
+
+			agic: interrupt-controller@2a40000 {
+				compatible = "nvidia,tegra234-agic",
+					     "nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x02a41000 0x0 0x1000>,
+				      <0x0 0x02a42000 0x0 0x2000>;
+				interrupts = <GIC_SPI 145
+					      (GIC_CPU_MASK_SIMPLE(4) |
+					       IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA234_CLK_APE>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+		};
+
+		mc: memory-controller@2c00000 {
+			compatible = "nvidia,tegra234-mc";
+			reg = <0x0 0x02c00000 0x0 0x10000>,   /* MC-SID */
+			      <0x0 0x02c10000 0x0 0x10000>,   /* MC Broadcast*/
+			      <0x0 0x02c20000 0x0 0x10000>,   /* MC0 */
+			      <0x0 0x02c30000 0x0 0x10000>,   /* MC1 */
+			      <0x0 0x02c40000 0x0 0x10000>,   /* MC2 */
+			      <0x0 0x02c50000 0x0 0x10000>,   /* MC3 */
+			      <0x0 0x02b80000 0x0 0x10000>,   /* MC4 */
+			      <0x0 0x02b90000 0x0 0x10000>,   /* MC5 */
+			      <0x0 0x02ba0000 0x0 0x10000>,   /* MC6 */
+			      <0x0 0x02bb0000 0x0 0x10000>,   /* MC7 */
+			      <0x0 0x01700000 0x0 0x10000>,   /* MC8 */
+			      <0x0 0x01710000 0x0 0x10000>,   /* MC9 */
+			      <0x0 0x01720000 0x0 0x10000>,   /* MC10 */
+			      <0x0 0x01730000 0x0 0x10000>,   /* MC11 */
+			      <0x0 0x01740000 0x0 0x10000>,   /* MC12 */
+			      <0x0 0x01750000 0x0 0x10000>,   /* MC13 */
+			      <0x0 0x01760000 0x0 0x10000>,   /* MC14 */
+			      <0x0 0x01770000 0x0 0x10000>;   /* MC15 */
+			reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3",
+				    "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10",
+				    "ch11", "ch12", "ch13", "ch14", "ch15";
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			#interconnect-cells = <1>;
+			status = "okay";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x01700000 0x0 0x01700000 0x0 0x100000>,
+				 <0x0 0x02b80000 0x0 0x02b80000 0x0 0x040000>,
+				 <0x0 0x02c00000 0x0 0x02c00000 0x0 0x100000>;
+
+			/*
+			 * Bit 39 of addresses passing through the memory
+			 * controller selects the XBAR format used when memory
+			 * is accessed. This is used to transparently access
+			 * memory in the XBAR format used by the discrete GPU
+			 * (bit 39 set) or Tegra (bit 39 clear).
+			 *
+			 * As a consequence, the operating system must ensure
+			 * that bit 39 is never used implicitly, for example
+			 * via an I/O virtual address mapping of an IOMMU. If
+			 * devices require access to the XBAR switch, their
+			 * drivers must set this bit explicitly.
+			 *
+			 * Limit the DMA range for memory clients to [38:0].
+			 */
+			dma-ranges = <0x0 0x0 0x0 0x0 0x80 0x0>;
+
+			emc: external-memory-controller@2c60000 {
+				compatible = "nvidia,tegra234-emc";
+				reg = <0x0 0x02c60000 0x0 0x90000>,
+				      <0x0 0x01780000 0x0 0x80000>;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_EMC>;
+				clock-names = "emc";
+				status = "okay";
+
+				#interconnect-cells = <0>;
+
+				nvidia,bpmp = <&bpmp>;
+			};
+		};
+
+		uarta: serial@3100000 {
+			compatible = "nvidia,tegra234-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_UARTA>;
+			resets = <&bpmp TEGRA234_RESET_UARTA>;
+			status = "disabled";
+		};
+
+		uarte: serial@3140000 {
+			compatible = "nvidia,tegra234-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_UARTE>;
+			resets = <&bpmp TEGRA234_RESET_UARTE>;
+			status = "disabled";
+		};
+
+		gen1_i2c: i2c@3160000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x3160000 0x0 0x100>;
+			status = "disabled";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C1
+				  &bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C1>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C1>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 21>, <&gpcdma 21>;
+			dma-names = "rx", "tx";
+		};
+
+		cam_i2c: i2c@3180000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x3180000 0x0 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C3
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C3>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 23>, <&gpcdma 23>;
+			dma-names = "rx", "tx";
+		};
+
+		dp_aux_ch1_i2c: i2c@3190000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x3190000 0x0 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C4
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C4>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C4>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 26>, <&gpcdma 26>;
+			dma-names = "rx", "tx";
+		};
+
+		dp_aux_ch0_i2c: i2c@31b0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x31b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C6
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C6>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C6>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 30>, <&gpcdma 30>;
+			dma-names = "rx", "tx";
+		};
+
+		dp_aux_ch2_i2c: i2c@31c0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x31c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C7
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C7>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C7>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 27>, <&gpcdma 27>;
+			dma-names = "rx", "tx";
+		};
+
+		uarti: serial@31d0000 {
+			compatible = "arm,sbsa-uart";
+			reg = <0x0 0x31d0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dp_aux_ch3_i2c: i2c@31e0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x31e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C9
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C9>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C9>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 31>, <&gpcdma 31>;
+			dma-names = "rx", "tx";
+		};
+
+		spi@3210000 {
+			compatible = "nvidia,tegra210-spi";
+			reg = <0x0 0x03210000 0x0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_SPI1>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_SPI1>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "spi";
+			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			resets = <&bpmp TEGRA234_RESET_SPI1>;
+			reset-names = "spi";
+			dmas = <&gpcdma 15>, <&gpcdma 15>;
+			dma-names = "rx", "tx";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		spi@3230000 {
+			compatible = "nvidia,tegra210-spi";
+			reg = <0x0 0x03230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_SPI3>;
+			clock-names = "spi";
+			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_SPI3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_SPI3>;
+			reset-names = "spi";
+			dmas = <&gpcdma 17>, <&gpcdma 17>;
+			dma-names = "rx", "tx";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		spi@3270000 {
+			compatible = "nvidia,tegra234-qspi";
+			reg = <0x0 0x3270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_QSPI0_2X_PM>,
+				 <&bpmp TEGRA234_CLK_QSPI0_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA234_RESET_QSPI0>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@3280000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x3280000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM1>;
+			resets = <&bpmp TEGRA234_RESET_PWM1>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm2: pwm@3290000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x3290000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM2>;
+			resets = <&bpmp TEGRA234_RESET_PWM2>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm3: pwm@32a0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32a0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			resets = <&bpmp TEGRA234_RESET_PWM3>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm5: pwm@32c0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32c0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM5>;
+			resets = <&bpmp TEGRA234_RESET_PWM5>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm6: pwm@32d0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32d0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM6>;
+			resets = <&bpmp TEGRA234_RESET_PWM6>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm7: pwm@32e0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32e0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM7>;
+			resets = <&bpmp TEGRA234_RESET_PWM7>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm8: pwm@32f0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32f0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM8>;
+			resets = <&bpmp TEGRA234_RESET_PWM8>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		spi@3300000 {
+			compatible = "nvidia,tegra234-qspi";
+			reg = <0x0 0x3300000 0x0 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_QSPI1_2X_PM>,
+				 <&bpmp TEGRA234_CLK_QSPI1_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA234_RESET_QSPI1>;
+			status = "disabled";
+		};
+
+		mmc@3400000 {
+			compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
+			reg = <0x0 0x03400000 0x0 0x20000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_SDMMC1>,
+				 <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA234_CLK_SDMMC1>,
+					  <&bpmp TEGRA234_CLK_PLLC4_MUXED>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC4_MUXED>,
+						 <&bpmp TEGRA234_CLK_PLLC4_VCO_DIV2>;
+			resets = <&bpmp TEGRA234_RESET_SDMMC1>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_SDMMCRA &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_SDMMCWA &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_SDMMC1A>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc1_3v3>;
+			pinctrl-1 = <&sdmmc1_1v8>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+			nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
+			nvidia,default-tap = <14>;
+			nvidia,default-trim = <0x8>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
+			status = "disabled";
+		};
+
+		mmc@3460000 {
+			compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
+			reg = <0x0 0x03460000 0x0 0x20000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_SDMMC4>,
+				 <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA234_CLK_SDMMC4>,
+					  <&bpmp TEGRA234_CLK_PLLC4>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC4>;
+			resets = <&bpmp TEGRA234_RESET_SDMMC4>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_SDMMCRAB &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_SDMMCWAB &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_SDMMC4>;
+			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
+			nvidia,default-tap = <0x8>;
+			nvidia,default-trim = <0x14>;
+			nvidia,dqs-trim = <40>;
+			supports-cqe;
+			status = "disabled";
+		};
+
+		hda@3510000 {
+			compatible = "nvidia,tegra234-hda";
+			reg = <0x0 0x3510000 0x0 0x10000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_AZA_BIT>,
+				 <&bpmp TEGRA234_CLK_AZA_2XBIT>;
+			clock-names = "hda", "hda2codec_2x";
+			resets = <&bpmp TEGRA234_RESET_HDA>,
+				 <&bpmp TEGRA234_RESET_HDACODEC>;
+			reset-names = "hda", "hda2codec_2x";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_DISP>;
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_HDAR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_HDAW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_HDA>;
+			status = "disabled";
+		};
+
+		xusb_padctl: padctl@3520000 {
+			compatible = "nvidia,tegra234-xusb-padctl";
+			reg = <0x0 0x03520000 0x0 0x20000>,
+			      <0x0 0x03540000 0x0 0x10000>;
+			reg-names = "padctl", "ao";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&bpmp TEGRA234_RESET_XUSB_PADCTL>;
+			reset-names = "padctl";
+
+			status = "disabled";
+
+			pads {
+				usb2 {
+					clocks = <&bpmp TEGRA234_CLK_USB2_TRK>;
+					clock-names = "trk";
+
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					status = "disabled";
+				};
+
+				usb2-1 {
+					status = "disabled";
+				};
+
+				usb2-2 {
+					status = "disabled";
+				};
+
+				usb2-3 {
+					status = "disabled";
+				};
+
+				usb3-0 {
+					status = "disabled";
+				};
+
+				usb3-1 {
+					status = "disabled";
+				};
+
+				usb3-2 {
+					status = "disabled";
+				};
+
+				usb3-3 {
+					status = "disabled";
+				};
+			};
+		};
+
+		usb@3550000 {
+			compatible = "nvidia,tegra234-xudc";
+			reg = <0x0 0x03550000 0x0 0x8000>,
+			      <0x0 0x03558000 0x0 0x8000>;
+			reg-names = "base", "fpci";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_DEV>,
+				 <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA234_CLK_XUSB_SS>,
+				 <&bpmp TEGRA234_CLK_XUSB_FS>;
+			clock-names = "dev", "ss", "ss_src", "fs_src";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_XUSB_DEV>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBB>,
+					<&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "dev", "ss";
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb@3610000 {
+			compatible = "nvidia,tegra234-xusb";
+			reg = <0x0 0x03610000 0x0 0x40000>,
+			      <0x0 0x03600000 0x0 0x10000>,
+			      <0x0 0x03650000 0x0 0x10000>;
+			reg-names = "hcd", "fpci", "bar2";
+
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
+				 <&bpmp TEGRA234_CLK_XUSB_FALCON>,
+				 <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA234_CLK_XUSB_SS>,
+				 <&bpmp TEGRA234_CLK_CLK_M>,
+				 <&bpmp TEGRA234_CLK_XUSB_FS>,
+				 <&bpmp TEGRA234_CLK_UTMIP_PLL>,
+				 <&bpmp TEGRA234_CLK_CLK_M>,
+				 <&bpmp TEGRA234_CLK_PLLE>;
+			clock-names = "xusb_host", "xusb_falcon_src",
+				      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+				      "xusb_fs_src", "pll_u_480m", "clk_m",
+				      "pll_e";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
+
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
+					<&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "xusb_host", "xusb_ss";
+
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		fuse@3810000 {
+			compatible = "nvidia,tegra234-efuse";
+			reg = <0x0 0x03810000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_FUSE>;
+			clock-names = "fuse";
+		};
+
+		hte_lic: hardware-timestamp@3aa0000 {
+			compatible = "nvidia,tegra234-gte-lic";
+			reg = <0x0 0x3aa0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			#timestamp-cells = <1>;
+		};
+
+		hsp_top0: hsp@3c00000 {
+			compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
+			reg = <0x0 0x03c00000 0x0 0xa0000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "doorbell", "shared0", "shared1", "shared2",
+					  "shared3", "shared4", "shared5", "shared6",
+					  "shared7";
+			#mbox-cells = <2>;
+		};
+
+		p2u_hsio_0: phy@3e00000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e00000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_1: phy@3e10000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e10000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_2: phy@3e20000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e20000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_3: phy@3e30000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e30000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_4: phy@3e40000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e40000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_5: phy@3e50000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e50000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_6: phy@3e60000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e60000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_7: phy@3e70000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e70000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_0: phy@3e90000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e90000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_1: phy@3ea0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ea0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_2: phy@3eb0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03eb0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_3: phy@3ec0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ec0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_4: phy@3ed0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ed0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_5: phy@3ee0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ee0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_6: phy@3ef0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ef0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_7: phy@3f00000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f00000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_0: phy@3f20000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f20000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_1: phy@3f30000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f30000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_2: phy@3f40000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f40000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_3: phy@3f50000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f50000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_4: phy@3f60000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f60000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_5: phy@3f70000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f70000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_6: phy@3f80000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f80000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_7: phy@3f90000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f90000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		ethernet@6800000 {
+			compatible = "nvidia,tegra234-mgbe";
+			reg = <0x0 0x06800000 0x0 0x10000>,
+			      <0x0 0x06810000 0x0 0x10000>,
+			      <0x0 0x068a0000 0x0 0x10000>;
+			reg-names = "hypervisor", "mac", "xpcs";
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>,
+				 <&bpmp TEGRA234_CLK_MGBE0_MAC>,
+				 <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>,
+				 <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE0_TX>,
+				 <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
+			clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+				      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+				      "rx-pcs", "tx-pcs";
+			resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
+				 <&bpmp TEGRA234_RESET_MGBE0_PCS>;
+			reset-names = "mac", "pcs";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+			status = "disabled";
+		};
+
+		ethernet@6900000 {
+			compatible = "nvidia,tegra234-mgbe";
+			reg = <0x0 0x06900000 0x0 0x10000>,
+			      <0x0 0x06910000 0x0 0x10000>,
+			      <0x0 0x069a0000 0x0 0x10000>;
+			reg-names = "hypervisor", "mac", "xpcs";
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			clocks = <&bpmp TEGRA234_CLK_MGBE1_APP>,
+				 <&bpmp TEGRA234_CLK_MGBE1_MAC>,
+				 <&bpmp TEGRA234_CLK_MGBE1_MAC_DIVIDER>,
+				 <&bpmp TEGRA234_CLK_MGBE1_PTP_REF>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_INPUT_M>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE1_TX>,
+				 <&bpmp TEGRA234_CLK_MGBE1_EEE_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_PCS_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_PCS_M>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE1_TX_PCS>;
+			clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+				      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+				      "rx-pcs", "tx-pcs";
+			resets = <&bpmp TEGRA234_RESET_MGBE1_MAC>,
+				 <&bpmp TEGRA234_RESET_MGBE1_PCS>;
+			reset-names = "mac", "pcs";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEBRD &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
+			status = "disabled";
+		};
+
+		ethernet@6a00000 {
+			compatible = "nvidia,tegra234-mgbe";
+			reg = <0x0 0x06a00000 0x0 0x10000>,
+			      <0x0 0x06a10000 0x0 0x10000>,
+			      <0x0 0x06aa0000 0x0 0x10000>;
+			reg-names = "hypervisor", "mac", "xpcs";
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			clocks = <&bpmp TEGRA234_CLK_MGBE2_APP>,
+				 <&bpmp TEGRA234_CLK_MGBE2_MAC>,
+				 <&bpmp TEGRA234_CLK_MGBE2_MAC_DIVIDER>,
+				 <&bpmp TEGRA234_CLK_MGBE2_PTP_REF>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_INPUT_M>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE2_TX>,
+				 <&bpmp TEGRA234_CLK_MGBE2_EEE_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_PCS_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_PCS_M>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE2_TX_PCS>;
+			clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+				      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+				      "rx-pcs", "tx-pcs";
+			resets = <&bpmp TEGRA234_RESET_MGBE2_MAC>,
+				 <&bpmp TEGRA234_RESET_MGBE2_PCS>;
+			reset-names = "mac", "pcs";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBECRD &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
+			status = "disabled";
+		};
+
+		ethernet@6b00000 {
+			compatible = "nvidia,tegra234-mgbe";
+			reg = <0x0 0x06b00000 0x0 0x10000>,
+			      <0x0 0x06b10000 0x0 0x10000>,
+			      <0x0 0x06ba0000 0x0 0x10000>;
+			reg-names = "hypervisor", "mac", "xpcs";
+			interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			clocks = <&bpmp TEGRA234_CLK_MGBE3_APP>,
+				 <&bpmp TEGRA234_CLK_MGBE3_MAC>,
+				 <&bpmp TEGRA234_CLK_MGBE3_MAC_DIVIDER>,
+				 <&bpmp TEGRA234_CLK_MGBE3_PTP_REF>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_INPUT_M>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE3_TX>,
+				 <&bpmp TEGRA234_CLK_MGBE3_EEE_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_PCS_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_PCS_M>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE3_TX_PCS>;
+			clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+				      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+				      "rx-pcs", "tx-pcs";
+			resets = <&bpmp TEGRA234_RESET_MGBE3_MAC>,
+				 <&bpmp TEGRA234_RESET_MGBE3_PCS>;
+			reset-names = "mac", "pcs";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEDRD &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_MGBEDWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF3>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>;
+			status = "disabled";
+		};
+
+		smmu_niso1: iommu@8000000 {
+			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x8000000 0x0 0x1000000>,
+			      <0x0 0x7000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
+		sce-fabric@b600000 {
+			compatible = "nvidia,tegra234-sce-fabric";
+			reg = <0x0 0xb600000 0x0 0x40000>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		rce-fabric@be00000 {
+			compatible = "nvidia,tegra234-rce-fabric";
+			reg = <0x0 0xbe00000 0x0 0x40000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		hsp_aon: hsp@c150000 {
+			compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
+			reg = <0x0 0x0c150000 0x0 0x90000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * Shared interrupt 0 is routed only to AON/SPE, so
+			 * we only have 4 shared interrupts for the CCPLEX.
+			 */
+			interrupt-names = "shared1", "shared2", "shared3", "shared4";
+			#mbox-cells = <2>;
+		};
+
+		hte_aon: hardware-timestamp@c1e0000 {
+			compatible = "nvidia,tegra234-gte-aon";
+			reg = <0x0 0xc1e0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,gpio-controller = <&gpio_aon>;
+			#timestamp-cells = <1>;
+		};
+
+		gen2_i2c: i2c@c240000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0xc240000 0x0 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C2
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C2>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_I2C2>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 22>, <&gpcdma 22>;
+			dma-names = "rx", "tx";
+		};
+
+		gen8_i2c: i2c@c250000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0xc250000 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C8
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C8>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_I2C8>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 0>, <&gpcdma 0>;
+			dma-names = "rx", "tx";
+		};
+
+		spi@c260000 {
+			compatible = "nvidia,tegra210-spi";
+			reg = <0x0 0x0c260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_SPI2>;
+			clock-names = "spi";
+			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_SPI2>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_SPI2>;
+			reset-names = "spi";
+			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dma-names = "rx", "tx";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		rtc@c2a0000 {
+			compatible = "nvidia,tegra234-rtc", "nvidia,tegra20-rtc";
+			reg = <0x0 0x0c2a0000 0x0 0x10000>;
+			interrupt-parent = <&pmc>;
+			interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_CLK_32K>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		gpio_aon: gpio@c2f0000 {
+			compatible = "nvidia,tegra234-gpio-aon";
+			reg-names = "security", "gpio";
+			reg = <0x0 0x0c2f0000 0x0 0x1000>,
+			      <0x0 0x0c2f1000 0x0 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pinmux_aon 0 0 32>;
+		};
+
+		pinmux_aon: pinmux@c300000 {
+			compatible = "nvidia,tegra234-pinmux-aon";
+			reg = <0x0 0xc300000 0x0 0x4000>;
+		};
+
+		pwm4: pwm@c340000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0xc340000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM4>;
+			resets = <&bpmp TEGRA234_RESET_PWM4>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pmc: pmc@c360000 {
+			compatible = "nvidia,tegra234-pmc";
+			reg = <0x0 0x0c360000 0x0 0x10000>,
+			      <0x0 0x0c370000 0x0 0x10000>,
+			      <0x0 0x0c380000 0x0 0x10000>,
+			      <0x0 0x0c390000 0x0 0x10000>,
+			      <0x0 0x0c3a0000 0x0 0x10000>;
+			reg-names = "pmc", "wake", "aotag", "scratch", "misc";
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+		};
+
+		aon-fabric@c600000 {
+			compatible = "nvidia,tegra234-aon-fabric";
+			reg = <0x0 0xc600000 0x0 0x40000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		bpmp-fabric@d600000 {
+			compatible = "nvidia,tegra234-bpmp-fabric";
+			reg = <0x0 0xd600000 0x0 0x40000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		dce-fabric@de00000 {
+			compatible = "nvidia,tegra234-sce-fabric";
+			reg = <0x0 0xde00000 0x0 0x40000>;
+			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		ccplex@e000000 {
+			compatible = "nvidia,tegra234-ccplex-cluster";
+			reg = <0x0 0x0e000000 0x0 0x5ffff>;
+			nvidia,bpmp = <&bpmp>;
+			status = "okay";
+		};
+
+		gic: interrupt-controller@f400000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f400000 0x0 0x010000>, /* GICD */
+			      <0x0 0x0f440000 0x0 0x200000>; /* GICR */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+
+			#redistributor-regions = <1>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		smmu_iso: iommu@10000000 {
+			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x10000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
+		smmu_niso0: iommu@12000000 {
+			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x12000000 0x0 0x1000000>,
+			      <0x0 0x11000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
+		cbb-fabric@13a00000 {
+			compatible = "nvidia,tegra234-cbb-fabric";
+			reg = <0x0 0x13a00000 0x0 0x400000>;
+			interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			compatible = "nvidia,tegra234-host1x";
+			reg = <0x0 0x13e00000 0x0 0x10000>,
+			      <0x0 0x13e10000 0x0 0x10000>,
+			      <0x0 0x13e40000 0x0 0x10000>;
+			reg-names = "common", "hypervisor", "vm";
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "syncpt0", "syncpt1", "syncpt2", "syncpt3", "syncpt4",
+					  "syncpt5", "syncpt6", "syncpt7", "host1x";
+			clocks = <&bpmp TEGRA234_CLK_HOST1X>;
+			clock-names = "host1x";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x14800000 0x0 0x14800000 0x0 0x02000000>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_HOST1XDMAR &emc>;
+			interconnect-names = "dma-mem";
+			iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>;
+			dma-coherent;
+
+			/* Context isolation domains */
+			iommu-map = <0 &smmu_niso0 TEGRA234_SID_HOST1X_CTX0 1>,
+				    <1 &smmu_niso0 TEGRA234_SID_HOST1X_CTX1 1>,
+				    <2 &smmu_niso0 TEGRA234_SID_HOST1X_CTX2 1>,
+				    <3 &smmu_niso0 TEGRA234_SID_HOST1X_CTX3 1>,
+				    <4 &smmu_niso0 TEGRA234_SID_HOST1X_CTX4 1>,
+				    <5 &smmu_niso0 TEGRA234_SID_HOST1X_CTX5 1>,
+				    <6 &smmu_niso0 TEGRA234_SID_HOST1X_CTX6 1>,
+				    <7 &smmu_niso0 TEGRA234_SID_HOST1X_CTX7 1>,
+				    <8 &smmu_niso1 TEGRA234_SID_HOST1X_CTX0 1>,
+				    <9 &smmu_niso1 TEGRA234_SID_HOST1X_CTX1 1>,
+				    <10 &smmu_niso1 TEGRA234_SID_HOST1X_CTX2 1>,
+				    <11 &smmu_niso1 TEGRA234_SID_HOST1X_CTX3 1>,
+				    <12 &smmu_niso1 TEGRA234_SID_HOST1X_CTX4 1>,
+				    <13 &smmu_niso1 TEGRA234_SID_HOST1X_CTX5 1>,
+				    <14 &smmu_niso1 TEGRA234_SID_HOST1X_CTX6 1>,
+				    <15 &smmu_niso1 TEGRA234_SID_HOST1X_CTX7 1>;
+
+			vic@15340000 {
+				compatible = "nvidia,tegra234-vic";
+				reg = <0x0 0x15340000 0x0 0x00040000>;
+				interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_VIC>;
+				clock-names = "vic";
+				resets = <&bpmp TEGRA234_RESET_VIC>;
+				reset-names = "vic";
+
+				power-domains = <&bpmp TEGRA234_POWER_DOMAIN_VIC>;
+				interconnects = <&mc TEGRA234_MEMORY_CLIENT_VICSRD &emc>,
+						<&mc TEGRA234_MEMORY_CLIENT_VICSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu_niso1 TEGRA234_SID_VIC>;
+				dma-coherent;
+			};
+
+			nvdec@15480000 {
+				compatible = "nvidia,tegra234-nvdec";
+				reg = <0x0 0x15480000 0x0 0x00040000>;
+				clocks = <&bpmp TEGRA234_CLK_NVDEC>,
+					 <&bpmp TEGRA234_CLK_FUSE>,
+					 <&bpmp TEGRA234_CLK_TSEC_PKA>;
+				clock-names = "nvdec", "fuse", "tsec_pka";
+				resets = <&bpmp TEGRA234_RESET_NVDEC>;
+				reset-names = "nvdec";
+				power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>;
+				interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>,
+						<&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>;
+				dma-coherent;
+
+				nvidia,memory-controller = <&mc>;
+
+				/*
+				 * Placeholder values that firmware needs to update with the real
+				 * offsets parsed from the microcode headers.
+				 */
+				nvidia,bl-manifest-offset = <0>;
+				nvidia,bl-data-offset = <0>;
+				nvidia,bl-code-offset = <0>;
+				nvidia,os-manifest-offset = <0>;
+				nvidia,os-data-offset = <0>;
+				nvidia,os-code-offset = <0>;
+
+				/*
+				 * Firmware needs to set this to "okay" once the above values have
+				 * been updated.
+				 */
+				status = "disabled";
+			};
+		};
+
+		pcie@140a0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CA>;
+			reg = <0x00 0x140a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x2a000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x2a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x2a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x35 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <8>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C8_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_8_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_8>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 8>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x32 0x40000000 0x32 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x35 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x2a100000 0x00 0x2a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE8AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE8AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE8 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@140c0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CB>;
+			reg = <0x00 0x140c0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x2c000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x2c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x2c080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x38 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <9>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C9_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_9_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_9>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 9>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xc0000000>, /* prefetchable memory (11264 MB) */
+				 <0x02000000 0x0  0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE9AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE9AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE9 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@140e0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>;
+			reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x2e000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x2e080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x3b 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <10>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_10>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 10>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x38 0x40000000 0x38 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x3b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x2e100000 0x00 0x2e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie-ep@140e0000 {
+			compatible = "nvidia,tegra234-pcie-ep";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>;
+			reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x2e080000 0x0 0x00040000>, /* DBI space (256K)           */
+			      <0x38 0x40000000 0x3 0x00000000>; /* Address Space (12G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			num-lanes = <4>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_10>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 10>;
+
+			nvidia,enable-ext-refclk;
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14100000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x30080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x20 0xb0000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			num-viewport = <8>;
+			linux,pci-domain = <1>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C1_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_1_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_1>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 1>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x20 0x80000000 0x20 0x80000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
+				 <0x02000000 0x0  0x40000000 0x20 0xa8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x30100000 0x00 0x30100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE1R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE1W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE1 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14120000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x32080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x20 0xf0000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			num-viewport = <8>;
+			linux,pci-domain = <2>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C2_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_2_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_2>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 2>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x20 0xc0000000 0x20 0xc0000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
+				 <0x02000000 0x0  0x40000000 0x20 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x32100000 0x00 0x32100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE2AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE2AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE2 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14140000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x34080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x21 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			num-viewport = <8>;
+			linux,pci-domain = <3>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C3_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_3_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_3>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 3>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
+				 <0x02000000 0x0  0x40000000 0x21 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE3W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE3 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14160000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+			reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <4>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 4>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE4 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14180000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BA>;
+			reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x27 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <0>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C0_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_0_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_0>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 0>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x24 0x40000000 0x24 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x27 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x38100000 0x00 0x38100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE0R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE0W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE0 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@141a0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+			reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x2b 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			num-viewport = <8>;
+			linux,pci-domain = <5>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+				 <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 5>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x28 0x00000000 0x28 0x00000000 0x3 0x28000000>, /* prefetchable memory (12928 MB) */
+				 <0x02000000 0x0  0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie-ep@141a0000 {
+			compatible = "nvidia,tegra234-pcie-ep";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+			reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			num-lanes = <8>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+				 <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 5>;
+
+			nvidia,enable-ext-refclk;
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@141c0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>;
+			reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3c000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3c080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x2e 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <6>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>,
+				 <&bpmp TEGRA234_RESET_PEX1_CORE_6>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 6>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x2b 0x40000000 0x2b 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x2e 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x3c100000 0x00 0x3c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie-ep@141c0000 {
+			compatible = "nvidia,tegra234-pcie-ep";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>;
+			reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3c080000 0x0 0x00040000>, /* DBI space (256K)           */
+			      <0x2b 0x40000000 0x3 0x00000000>; /* Address Space (12G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			num-lanes = <4>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>,
+				 <&bpmp TEGRA234_RESET_PEX1_CORE_6>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 6>;
+
+			nvidia,enable-ext-refclk;
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@141e0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>;
+			reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3e000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3e080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x32 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			num-viewport = <8>;
+			linux,pci-domain = <7>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_7>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 7>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x30 0x00000000 0x30 0x00000000 0x2 0x28000000>, /* prefetchable memory (8832 MB) */
+				 <0x02000000 0x0  0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie-ep@141e0000 {
+			compatible = "nvidia,tegra234-pcie-ep";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>;
+			reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3e080000 0x0 0x00040000>, /* DBI space (256K)           */
+			      <0x2e 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			num-lanes = <8>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_7>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 7>;
+
+			nvidia,enable-ext-refclk;
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+	};
+
+	sram@40000000 {
+		compatible = "nvidia,tegra234-sysram", "mmio-sram";
+		reg = <0x0 0x40000000 0x0 0x80000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40000000 0x80000>;
+
+		no-memory-wc;
+
+		cpu_bpmp_tx: sram@70000 {
+			reg = <0x70000 0x1000>;
+			label = "cpu-bpmp-tx";
+			pool;
+		};
+
+		cpu_bpmp_rx: sram@71000 {
+			reg = <0x71000 0x1000>;
+			label = "cpu-bpmp-rx";
+			pool;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra234-bpmp", "nvidia,tegra186-bpmp";
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+				    TEGRA_HSP_DB_MASTER_BPMP>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+		interconnects = <&mc TEGRA234_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
+		iommus = <&smmu_niso1 TEGRA234_SID_BPMP>;
+
+		bpmp_i2c: i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		bpmp_thermal: thermal {
+			compatible = "nvidia,tegra186-bpmp-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0_0: cpu@0 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00000>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl0_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_0>;
+		};
+
+		cpu0_1: cpu@100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00100>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl0_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_1>;
+		};
+
+		cpu0_2: cpu@200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00200>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl0_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_2>;
+		};
+
+		cpu0_3: cpu@300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00300>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl0_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_3>;
+		};
+
+		cpu1_0: cpu@10000 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10000>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl1_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_0>;
+		};
+
+		cpu1_1: cpu@10100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10100>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl1_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_1>;
+		};
+
+		cpu1_2: cpu@10200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10200>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl1_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_2>;
+		};
+
+		cpu1_3: cpu@10300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10300>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl1_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_3>;
+		};
+
+		cpu2_0: cpu@20000 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20000>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl2_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_0>;
+		};
+
+		cpu2_1: cpu@20100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20100>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl2_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_1>;
+		};
+
+		cpu2_2: cpu@20200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20200>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl2_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_2>;
+		};
+
+		cpu2_3: cpu@20300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20300>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl2_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_3>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0_0>;
+				};
+
+				core1 {
+					cpu = <&cpu0_1>;
+				};
+
+				core2 {
+					cpu = <&cpu0_2>;
+				};
+
+				core3 {
+					cpu = <&cpu0_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu1_0>;
+				};
+
+				core1 {
+					cpu = <&cpu1_1>;
+				};
+
+				core2 {
+					cpu = <&cpu1_2>;
+				};
+
+				core3 {
+					cpu = <&cpu1_3>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu2_0>;
+				};
+
+				core1 {
+					cpu = <&cpu2_1>;
+				};
+
+				core2 {
+					cpu = <&cpu2_2>;
+				};
+
+				core3 {
+					cpu = <&cpu2_3>;
+				};
+			};
+		};
+
+		l2c0_0: l2-cache00 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c0_1: l2-cache01 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c0_2: l2-cache02 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c0_3: l2-cache03 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c1_0: l2-cache10 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c1_1: l2-cache11 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c1_2: l2-cache12 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c1_3: l2-cache13 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c2_0: l2-cache20 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c2>;
+		};
+
+		l2c2_1: l2-cache21 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c2>;
+		};
+
+		l2c2_2: l2-cache22 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c2>;
+		};
+
+		l2c2_3: l2-cache23 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c2>;
+		};
+
+		l3c0: l3-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <3>;
+		};
+
+		l3c1: l3-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <3>;
+		};
+
+		l3c2: l3-cache2 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <3>;
+		};
+	};
+
+	dsu-pmu0 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		cpus = <&cpu0_0>, <&cpu0_1>, <&cpu0_2>, <&cpu0_3>;
+	};
+
+	dsu-pmu1 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
+		cpus = <&cpu1_0>, <&cpu1_1>, <&cpu1_2>, <&cpu1_3>;
+	};
+
+	dsu-pmu2 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		cpus = <&cpu2_0>, <&cpu2_1>, <&cpu2_2>, <&cpu2_3>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		status = "okay";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	tcu: serial {
+		compatible = "nvidia,tegra234-tcu", "nvidia,tegra194-tcu";
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>,
+			 <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>;
+		mbox-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	sound {
+		status = "disabled";
+
+		clocks = <&bpmp TEGRA234_CLK_PLLA>,
+			 <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+		clock-names = "pll_a", "plla_out0";
+		assigned-clocks = <&bpmp TEGRA234_CLK_PLLA>,
+				  <&bpmp TEGRA234_CLK_PLLA_OUT0>,
+				  <&bpmp TEGRA234_CLK_AUD_MCLK>;
+		assigned-clock-parents = <0>,
+					 <&bpmp TEGRA234_CLK_PLLA>,
+					 <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CPU>;
+			status = "disabled";
+		};
+
+		gpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_GPU>;
+			status = "disabled";
+		};
+
+		cv0-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV0>;
+			status = "disabled";
+		};
+
+		cv1-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV1>;
+			status = "disabled";
+		};
+
+		cv2-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV2>;
+			status = "disabled";
+		};
+
+		soc0-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC0>;
+			status = "disabled";
+		};
+
+		soc1-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC1>;
+			status = "disabled";
+		};
+
+		soc2-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC2>;
+			status = "disabled";
+		};
+
+		tj-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_TJ_MAX>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+		always-on;
+	};
+
+	cl0_opp_tbl: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cl0_ch1_opp1: opp-115200000 {
+			  opp-hz = /bits/ 64 <115200000>;
+			  opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp2: opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp3: opp-268800000 {
+			opp-hz = /bits/ 64 <268800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp4: opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp5: opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp6: opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp7: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp8: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp9: opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp10: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp11: opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp12: opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp13: opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp14: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp15: opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp16: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp17: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp18: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp19: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp20: opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp21: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp22: opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp23: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp24: opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp25: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp26: opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp27: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl0_ch1_opp28: opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl0_ch1_opp29: opp-2201600000 {
+			opp-hz = /bits/ 64 <2201600000>;
+			opp-peak-kBps = <6400000>;
+		};
+	};
+
+	cl1_opp_tbl: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cl1_ch1_opp1: opp-115200000 {
+			  opp-hz = /bits/ 64 <115200000>;
+			  opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp2: opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp3: opp-268800000 {
+			opp-hz = /bits/ 64 <268800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp4: opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp5: opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp6: opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp7: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp8: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp9: opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp10: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp11: opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp12: opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp13: opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp14: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp15: opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp16: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp17: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp18: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp19: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp20: opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp21: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp22: opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp23: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp24: opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp25: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp26: opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp27: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl1_ch1_opp28: opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl1_ch1_opp29: opp-2201600000 {
+			opp-hz = /bits/ 64 <2201600000>;
+			opp-peak-kBps = <6400000>;
+		};
+	};
+
+	cl2_opp_tbl: opp-table-cluster2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cl2_ch1_opp1: opp-115200000 {
+			  opp-hz = /bits/ 64 <115200000>;
+			  opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp2: opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp3: opp-268800000 {
+			opp-hz = /bits/ 64 <268800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp4: opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp5: opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp6: opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp7: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp8: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp9: opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp10: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp11: opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp12: opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp13: opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp14: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp15: opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp16: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp17: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp18: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp19: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp20: opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp21: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp22: opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp23: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp24: opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp25: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp26: opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp27: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl2_ch1_opp28: opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl2_ch1_opp29: opp-2201600000 {
+			opp-hz = /bits/ 64 <2201600000>;
+			opp-peak-kBps = <6400000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
new file mode 100644
index 0000000000..2cca20563a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-d3-camera-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8039-t2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp441.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp418.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp449.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp453.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp454.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-gplus-fl8005a.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-huawei-g7.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8910.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e7.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandmax.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt510.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt58.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5x.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-tissot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-vince.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-kugo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-suzu.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-octagon-talkman.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-xiaomi-libra.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-huawei-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-msft-lumia-octagon-cityman.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-ivy.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-karin.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-satsuki.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-sumire.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-suzuran.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-oneplus3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-oneplus3t.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-sony-xperia-tone-dora.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-sony-xperia-tone-kagura.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-sony-xperia-tone-keyaki.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-xiaomi-gemini.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996pro-xiaomi-natrium.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996pro-xiaomi-scorpio.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-fxtec-pro1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-cheeseburger.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-dumpling.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-lilac.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-homestar-r2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-homestar-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-homestar-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-kingoftown.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r3-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-ti.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-ti.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel360-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel360-wifi.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r2-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-quackingstick-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-quackingstick-r0-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-inx.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-crd-pro.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-evoker.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-evoker-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-nvme.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-nvme-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-motorola-ali.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-fairphone-fp3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-navigation-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyln.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-enchilada.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-fajita.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-samsung-starqltechn.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akari.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akatsuki.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-apollo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium-ebbg.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium-tianma.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdx75-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6115p-lenovo-j606f.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-bahamut.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-griffin.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-csot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx214.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
new file mode 100644
index 0000000000..c08b4be5cc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "apq8016-sbc.dts"
+
+/ {
+	camera_vdddo_1v8: camera-vdddo-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdddo";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	camera_vdda_2v8: camera-vdda-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdda";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	camera_vddd_1v5: camera-vddd-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+};
+
+&camss {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			csiphy0_ep: endpoint {
+				data-lanes = <0 2>;
+				remote-endpoint = <&ov5640_ep>;
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c0 {
+	camera_rear@3b {
+		compatible = "ovti,ov5640";
+		reg = <0x3b>;
+
+		powerdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_rear_default>;
+
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "xclk";
+		assigned-clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		assigned-clock-rates = <23880000>;
+
+		DOVDD-supply = <&camera_vdddo_1v8>;
+		AVDD-supply = <&camera_vdda_2v8>;
+		DVDD-supply = <&camera_vddd_1v5>;
+
+		port {
+			ov5640_ep: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
new file mode 100644
index 0000000000..dabe9f42a6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. APQ 8016 SBC";
+	compatible = "qcom,apq8016-sbc", "qcom,apq8016";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+		serial1 = &blsp_uart1;
+		usid0 = &pm8916_0;
+		i2c0 = &blsp_i2c2;
+		i2c1 = &blsp_i2c6;
+		i2c3 = &blsp_i2c4;
+		spi0 = &blsp_spi5;
+		spi1 = &blsp_spi3;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		ramoops@bff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xbff00000 0x0 0x100000>;
+
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+		};
+	};
+
+	usb2513 {
+		compatible = "smsc,usb3503";
+		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&msm_key_volp_n_default>;
+
+		button {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&tlmm_leds>,
+			    <&pm8916_gpios_leds>,
+			    <&pm8916_mpps_leds>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "apq8016-sbc:green:user1";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "apq8016-sbc:green:user2";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "apq8016-sbc:green:user3";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "apq8016-sbc:green:user4";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			panic-indicator;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "apq8016-sbc:yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "apq8016-sbc:blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp_i2c2 {
+	/* On Low speed expansion: LS-I2C0 */
+	status = "okay";
+};
+
+&blsp_i2c4 {
+	/* On High speed expansion: HS-I2C2 */
+	status = "okay";
+
+	adv_bridge: bridge@39 {
+		status = "okay";
+
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,dsi-lanes = <4>;
+		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+		clock-names = "cec";
+
+		pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		avdd-supply = <&pm8916_l6>;
+		a2vdd-supply = <&pm8916_l6>;
+		dvdd-supply = <&pm8916_l6>;
+		pvdd-supply = <&pm8916_l6>;
+		v1p2-supply = <&pm8916_l6>;
+		v3p3-supply = <&pm8916_l17>;
+
+		pinctrl-names = "default","sleep";
+		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7533_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&blsp_i2c6 {
+	/* On Low speed expansion: LS-I2C1 */
+	status = "okay";
+};
+
+&blsp_spi3 {
+	/* On High speed expansion: HS-SPI1 */
+	status = "okay";
+};
+
+&blsp_spi5 {
+	/* On Low speed expansion: LS-SPI0 */
+	status = "okay";
+};
+
+&blsp_uart1 {
+	status = "okay";
+	label = "LS-UART0";
+};
+
+&blsp_uart2 {
+	status = "okay";
+	label = "LS-UART1";
+};
+
+&camss {
+	status = "okay";
+};
+
+&lpass {
+	status = "okay";
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&adv7533_in>;
+};
+
+&mpss {
+	status = "okay";
+
+	firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
+};
+
+&pm8916_codec {
+	status = "okay";
+	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "mclk";
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	/*
+	 * The 96Boards specification expects a 1.8V power rail on the low-speed
+	 * expansion connector that is able to provide at least 0.18W / 100 mA.
+	 * L15/L16 are connected in parallel to provide 55 mA each. A minimum load
+	 * must be specified to ensure the regulators are not put in LPM where they
+	 * would only provide 5 mA.
+	 */
+	pm8916_l15: l15 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
+		regulator-always-on;
+	};
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
+		regulator-always-on;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	status = "okay";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+	model = "DB410c";
+	audio-routing =
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	quaternary-dai-link {
+		link-name = "ADV7533";
+		cpu {
+			sound-dai = <&lpass MI2S_QUATERNARY>;
+		};
+		codec {
+			sound-dai = <&adv_bridge 0>;
+		};
+	};
+
+	primary-dai-link {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	tertiary-dai-link {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+
+	pinctrl-names = "default", "device";
+	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+	firmware-name = "qcom/apq8016/wcnss.mbn";
+};
+
+&wcnss_ctrl {
+	firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+/* Enable CoreSight */
+&cti0 { status = "okay"; };
+&cti1 { status = "okay"; };
+&cti12 { status = "okay"; };
+&cti13 { status = "okay"; };
+&cti14 { status = "okay"; };
+&cti15 { status = "okay"; };
+&debug0 { status = "okay"; };
+&debug1 { status = "okay"; };
+&debug2 { status = "okay"; };
+&debug3 { status = "okay"; };
+&etf { status = "okay"; };
+&etm0 { status = "okay"; };
+&etm1 { status = "okay"; };
+&etm2 { status = "okay"; };
+&etm3 { status = "okay"; };
+&etr { status = "okay"; };
+&funnel0 { status = "okay"; };
+&funnel1 { status = "okay"; };
+&replicator { status = "okay"; };
+&stm { status = "okay"; };
+&tpiu { status = "okay"; };
+
+/*
+ * 2mA drive strength is not enough when connecting multiple
+ * I2C devices with different pull up resistors.
+ */
+&blsp_i2c2_default {
+	drive-strength = <16>;
+};
+
+&blsp_i2c4_default {
+	drive-strength = <16>;
+};
+
+&blsp_i2c6_default {
+	drive-strength = <16>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "DragonBoard410c"
+ * dated monday, august 31, 2015. Page 5 in particular.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
+&tlmm {
+	gpio-line-names =
+		"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
+		"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
+		"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
+		"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
+		"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
+		"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
+		"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
+		"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
+		"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
+		"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
+		"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
+		"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
+		"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
+		"[I2C3_SDA]", /* HSEC pin 38 */
+		"[I2C3_SCL]", /* HSEC pin 36 */
+		"[SPI0_MOSI]", /* LSEC pin 14 */
+		"[SPI0_MISO]", /* LSEC pin 10 */
+		"[SPI0_CS_N]", /* LSEC pin 12 */
+		"[SPI0_CLK]", /* LSEC pin 8 */
+		"HDMI_HPD_N", /* GPIO 20 */
+		"USR_LED_1_CTRL",
+		"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
+		"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
+		"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
+		"[CSI0_MCLK]", /* HSEC pin 15 */
+		"[CSI1_MCLK]", /* HSEC pin 17 */
+		"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
+		"[I2C2_SDA]", /* HSEC pin 34 */
+		"[I2C2_SCL]", /* HSEC pin 32 */
+		"DSI2HDMI_INT_N",
+		"DSI_SW_SEL_APQ",
+		"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
+		"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
+		"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
+		"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
+		"FORCED_USB_BOOT",
+		"SD_CARD_DET_N",
+		"[WCSS_BT_SSBI]",
+		"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
+		"[WCSS_WLAN_DATA_1]",
+		"[WCSS_WLAN_DATA_0]",
+		"[WCSS_WLAN_SET]",
+		"[WCSS_WLAN_CLK]",
+		"[WCSS_FM_SSBI]",
+		"[WCSS_FM_SDI]",
+		"[WCSS_BT_DAT_CTL]",
+		"[WCSS_BT_DAT_STB]",
+		"NC",
+		"NC", /* GPIO 50 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 60 */
+		"NC",
+		"NC",
+		"[CDC_PDM0_CLK]",
+		"[CDC_PDM0_SYNC]",
+		"[CDC_PDM0_TX0]",
+		"[CDC_PDM0_RX0]",
+		"[CDC_PDM0_RX1]",
+		"[CDC_PDM0_RX2]",
+		"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
+		"NC", /* GPIO 70 */
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 74 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_0", /* GPIO 80 */
+		"BOOT_CONFIG_1",
+		"BOOT_CONFIG_2",
+		"BOOT_CONFIG_3",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_5",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 90 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 100 */
+		"NC",
+		"NC",
+		"NC",
+		"SSBI_GPS",
+		"NC",
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_WS]", /* GPIO 110 */
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_SCK]",
+		"[LS_EXP_MI2S_DATA0]",
+		"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
+		"NC",
+		"[DSI2HDMI_MI2S_WS]",
+		"[DSI2HDMI_MI2S_SCK]",
+		"[DSI2HDMI_MI2S_DATA0]",
+		"USR_LED_2_CTRL", /* GPIO 120 */
+		"SB_HS_ID";
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tlmm_leds: tlmm-leds-state {
+		pins = "gpio21", "gpio120";
+		function = "gpio";
+
+		output-low;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	adv7533_int_active: adv533-int-active-state {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_int_suspend: adv7533-int-suspend-state {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	adv7533_switch_active: adv7533-switch-active-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_switch_suspend: adv7533-switch-suspend-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_key_volp_n_default: msm-key-volp-n-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&pm8916_gpios {
+	gpio-line-names =
+		"USR_LED_3_CTRL",
+		"USR_LED_4_CTRL",
+		"USB_HUB_RESET_N_PM",
+		"USB_SW_SEL_PM";
+
+	usb_hub_reset_pm: usb-hub-reset-pm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		input-disable;
+		output-high;
+	};
+
+	usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
+	};
+
+	usb_sw_sel_pm: usb-sw-sel-pm-state {
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-high;
+	};
+
+	usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-low;
+	};
+
+	pm8916_gpios_leds: pm8916-gpios-leds-state {
+		pins = "gpio1", "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
+	};
+};
+
+&pm8916_mpps {
+	gpio-line-names =
+		"VDD_PX_BIAS",
+		"WLAN_LED_CTRL",
+		"BT_LED_CTRL",
+		"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f>;
+
+	ls_exp_gpio_f: pm8916-mpp4-state {
+		pins = "mpp4";
+		function = "digital";
+
+		output-low;
+		power-source = <PM8916_MPP_L5>;	/* 1.8V */
+	};
+
+	pm8916_mpps_leds: pm8916-mpps-state {
+		pins = "mpp2", "mpp3";
+		function = "digital";
+
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
new file mode 100644
index 0000000000..027d1da7e8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "msm8939.dtsi"
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/ {
+	model = "Square, Inc. T2 Devkit";
+	compatible = "square,apq8039-t2", "qcom,msm8939";
+
+	qcom,board-id = <0x53 0x54>;
+	qcom,msm-id = <QCOM_ID_APQ8039 0x30000>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp_uart1;
+		serial1 = &blsp_uart2;
+	};
+
+	bl: backlight {
+		compatible = "gpio-backlight";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pinctrl-names = "default";
+		gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	vreg_lcd_avdd_reg: lcd-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_avdd";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+		pinctrl-0 = <&pinctrl_lcd_avdd_reg>;
+		pinctrl-names = "default";
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300>;
+		enable-active-high;
+	};
+
+	vreg_lcd_avee_reg: lcd-avee-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_avee";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+		pinctrl-0 = <&pinctrl_lcd_avee_reg>;
+		pinctrl-names = "default";
+		gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300>;
+		enable-active-high;
+	};
+
+	vreg_lcd_iovcc_reg: lcd-iovcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_iovcc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&pinctrl_lcd_iovcc_reg>;
+		pinctrl-names = "default";
+		gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300>;
+		enable-active-high;
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+};
+
+&blsp_i2c2 {
+	status = "okay";
+};
+
+&blsp_i2c3 {
+	status = "okay";
+
+	typec_pd: usb-pd@38 {
+		compatible = "ti,tps6598x";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <107 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec_irq>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+
+			port {
+				typec_ep: endpoint {
+					remote-endpoint = <&otg_ep>;
+				};
+			};
+		};
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+};
+
+&blsp_uart1 {
+	status = "okay";
+};
+
+&blsp_uart1_default {
+	pins = "gpio0", "gpio1";
+};
+
+&blsp_uart1_sleep {
+	pins = "gpio0", "gpio1";
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&lpass {
+	status = "okay";
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&pm8916_codec {
+	qcom,hphl-jack-type-normally-open;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	status = "okay";
+};
+
+&pm8916_gpios {
+	gpio-line-names =
+		"PM_GPIO1",     /* WIFI_GPIO1_PRE */
+		"PM_GPIO2",     /* WIFI_GPIO2_PRE */
+		"PM_GPIO3",
+		"PM_GPIO4";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sound {
+	model = "apq8039-square-sndcard";
+	audio-routing = "AMIC2", "MIC BIAS Internal2";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+
+	internal-codec-playback-dai-link {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	internal-codec-capture-dai-link {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
+
+/*
+ * Line names are taken from the schematic of T2, Ver X03.
+ * July 14, 2018. Page 4 in particular.
+ */
+&tlmm {
+	gpio-line-names =
+		"APQ_UART1_TX",		/* GPIO_0 */
+		"APQ_UART1_RX",
+		"APQ_I2C1_SDA",
+		"APQ_I2C1_SCL",
+		"APQ_UART2_TX_1V8",
+		"APQ_UART2_RX_1V8",
+		"APQ_I2C2_SDA",
+		"APQ_I2C2_SCL",
+		"NC",
+		"APQ_LCD_IOVCC_EN",
+		"APQ_I2C3_SDA",		/* GPIO_10 */
+		"APQ_I2C3_SCL",
+		"TOUCH_RST_1V8_L",
+		"NC",
+		"APQ_I2C4_SDA",
+		"APQ_I2C4_SCL",
+		"APQ_ID5",
+		"USB_DISCONNECT",
+		"APQ_I2C5_SDA",
+		"APQ_I2C5_SCL",
+		"APQ_USBC_SPI_MOSI",	/* GPIO_20 */
+		"APQ_USBC_SPI_MISO",
+		"APQ_USBC_SPI_SS_L",
+		"APQ_USBC_SPI_CLK",
+		"APQ_LCD_TE0",
+		"APQ_LCD_RST_L",
+		"NC",
+		"NC",
+		"ACCELEROMETER_INT1",
+		"APQ_CAM_I2C0_SDA",
+		"APQ_CAM_I2C0_SCL",	/* GPIO_30 */
+		"ACCELEROMETER_INT2",
+		"NC",
+		"NC",
+		"NC",
+		"APQ_K21_RST_1V8_L",
+		"NC",
+		"APQ_EDL_1V8",
+		"TP145",
+		"BT_SSBI",
+		"NC",			/* GPIO_40 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"BT_CTRL",
+		"BT_DAT",
+		"PWR_GPIO_IN",
+		"PWR_GPIO_OUT",		/* GPIO_50 */
+		"CARD_DET_MLB_L",
+		"HALL_SENSOR",
+		"TP63",
+		"TP64",
+		"TP65",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",			/* GPIO_60 */
+		"NC",
+		"APQ_K21_GPIO0_1V8",
+		"CDC_PDM_CLK",
+		"CDC_PDM_SYNC",
+		"CDC_PDM_TX",
+		"CDC_PDM_RX0",
+		"CDC_PDM_RX1",
+		"CDC_PDM_RX2",
+		"APQ_K21_GPIO1_1V8",
+		"NC",			/* GPIO_70 */
+		"APQ_HUB_SEL_1V8",
+		"APQ_K21_GPIO2_1V8",
+		"APQ_K21_GPIO3_1V8",
+		"APQ_ID0",
+		"APQ_ID1",
+		"APQ_ID2",
+		"APQ_ID3",
+		"APQ_ID4",
+		"APQ_HUB_SUSP_IND",
+		"BOOT_CONFIG_0",	/* GPIO_80 */
+		"BOOT_CONFIG_1",
+		"BOOT_CONFIG_2",
+		"BOOT_CONFIG_3",
+		"NC",
+		"NC",
+		"APQ_LCD_AVDD_EN",
+		"APQ_LCD_AVEE_EN",
+		"TP70",
+		"NC",
+		"APQ_DEBUG0",		/* GPIO_90 */
+		"APQ_DEBUG1",
+		"APQ_DEBUG2",
+		"APQ_DEBUG3",
+		"TP165",
+		"NC",
+		"APQ_LNA_PWR_EN",
+		"NC",
+		"APQ_LCD_BL_EN",
+		"NC",
+		"APQ_LCD_ID0",		/* GPIO_100 */
+		"APQ_LCD_ID1",
+		"USBC_GPIO5_1V8",
+		"NC",
+		"NC",
+		"NC",
+		"APQ_HUB_RST_1V8_L",
+		"USBC_I2C_IRQ_1V8_L",
+		"SPE_PWR_EN",
+		"NC",
+		"APQ_USB_ID",		/* GPIO_110 */
+		"APQ_EXT_BUCK_VSEL",
+		"APQ_USB_ID_OUT",
+		"NC",
+		"PRNT_RST_L",
+		"APQ_CRQ_I2C_RDY_1V8",
+		"TYPEC_RST_1V8_H",
+		"CHG_BACKPWR_EN",
+		"CHG_PROCHOT_L",
+		"NC",
+		"USBC_GPIO7_1V8",	/* GPIO_120 */
+		"NC";
+
+	pinctrl_backlight: backlight-state {
+		pins = "gpio98";
+		function = "gpio";
+	};
+
+	pinctrl_lcd_avdd_reg: lcd-avdd-reg-state {
+		pins = "gpio86";
+		function = "gpio";
+	};
+
+	pinctrl_lcd_avee_reg: lcd-avee-reg-state {
+		pins = "gpio87";
+		function = "gpio";
+	};
+
+	pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state {
+		pins = "gpio9";
+		function = "gpio";
+	};
+
+	pinctrl_lcd_rst: lcd-rst-state {
+		pins = "gpio25";
+		function = "gpio";
+	};
+
+	pinctrl_otg_default: otg-default-state {
+		function = "gpio";
+		pins = "gpio17";
+		output-high;
+	};
+
+	pinctrl_otg_device: otg-device-state {
+		function = "gpio";
+		pins = "gpio17";
+		output-low;
+	};
+
+	pinctrl_otg_host: otg-host-state {
+		function = "gpio";
+		pins = "gpio17";
+		output-low;
+	};
+
+	typec_irq: typec-irq-state {
+		function = "gpio";
+		pins = "gpio107";
+		bias-pull-up;
+	};
+};
+
+&usb {
+	pinctrl-names = "default", "host", "device";
+	pinctrl-0 = <&pinctrl_otg_default>;
+	pinctrl-1 = <&pinctrl_otg_host>;
+	pinctrl-2 = <&pinctrl_otg_device>;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		otg_ep: endpoint {
+			remote-endpoint = <&typec_ep>;
+		};
+	};
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3680";
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts
new file mode 100644
index 0000000000..314d2dc472
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+/* As the names may imply, there is quite a bunch of duplication there. */
+#include "msm8994-sony-xperia-kitakami-karin.dts"
+
+/ {
+	model = "Sony Xperia Z4 Tablet (Wi-Fi)";
+	compatible = "sony,karin_windy", "qcom,apq8094";
+	chassis-type = "tablet";
+
+	/*
+	 * This model uses the APQ variant of MSM8994 (APQ8094).
+	 * The v1/v2/v2.1 story (from kitakami.dtsi) also applies here.
+	 */
+	qcom,msm-id = <253 0x20000>, <253 0x20001>;
+};
+
+/delete-node/ &pm8994_l1;
+/delete-node/ &pm8994_l19;
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
new file mode 100644
index 0000000000..3067a4091a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -0,0 +1,1137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC      = not connected (pin out but not routed from the chip to
+ *                   anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC    = Low Speed External Connector
+ *         P HSEC  = Primary High Speed External Connector
+ *         S HSEC  = Secondary High Speed External Connector
+ *         J14     = Camera Connector
+ *         TP      = Test Points
+ *
+ * Line names are taken from the schematic "DragonBoard 820c",
+ * drawing no: LM25-P2751-1
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
+/ {
+	model = "Qualcomm Technologies, Inc. DB820c";
+	compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+		serial1 = &blsp2_uart3;
+		serial2 = &blsp1_uart2;
+		i2c0 = &blsp1_i2c3;
+		i2c1 = &blsp2_i2c1;
+		i2c2 = &blsp2_i2c1;
+		spi0 = &blsp1_spi1;
+		spi1 = &blsp2_spi6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	div1_mclk: divclk1 {
+		compatible = "gpio-gate-clock";
+		pinctrl-0 = <&audio_mclk>;
+		pinctrl-names = "default";
+		clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+		#clock-cells = <0>;
+		enable-gpios = <&pm8994_gpios 15 0>;
+	};
+
+	divclk4: divclk4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "divclk4";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&divclk4_pin_a>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		button {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb2_id: usb2-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_det_gpio>;
+	};
+
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_det_gpio>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c3 {
+	/* On Low speed expansion: LS-I2C0 */
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	/* On Low speed expansion */
+	status = "okay";
+};
+
+&blsp1_uart2 {
+	label = "BT-UART";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		/* bt_disable_n gpio */
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		clocks = <&divclk4>;
+	};
+};
+
+&adsp_pil {
+	status = "okay";
+	firmware-name = "qcom/apq8096/adsp.mbn";
+};
+
+&blsp2_i2c1 {
+	/* On High speed expansion: HS-I2C2 */
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	/* On Low speed expansion: LS-I2C1 */
+	status = "okay";
+};
+
+&blsp2_spi6 {
+	/* On High speed expansion */
+	status = "okay";
+};
+
+&blsp2_uart2 {
+	label = "LS-UART1";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+};
+
+&blsp2_uart3 {
+	label = "LS-UART0";
+	status = "disabled";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart3_4pins_default>;
+	pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsusb_phy1 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&hsusb_phy2 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_hdmi {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+	core-vdda-supply = <&vreg_l12a_1p8>;
+	core-vcc-supply = <&vreg_s4a_1p8>;
+};
+
+&mdss_hdmi_phy {
+	status = "okay";
+
+	vddio-supply = <&vreg_l12a_1p8>;
+	vcca-supply = <&vreg_l28a_0p925>;
+	#phy-cells = <0>;
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+	status = "okay";
+	pll-supply = <&vreg_l12a_1p8>;
+	firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn";
+};
+
+&pm8994_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&tlmm {
+	gpio-line-names =
+		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+		"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+		"TP93", /* GPIO_9 */
+		"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+		"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+		"NC", /* GPIO_12 */
+		"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+		"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+		"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+		"TP99", /* GPIO_16 */
+		"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+		"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+		"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+		"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+		"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+		"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+		"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+		"GPIO-D", /* GPIO_24, LSEC pin 26 */
+		"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+		"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+		"BLSP6_I2C_SDA", /* GPIO_27 */
+		"BLSP6_I2C_SCL", /* GPIO_28 */
+		"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+		"GPIO30", /* GPIO_30, S HSEC pin 4 */
+		"HDMI_CEC", /* GPIO_31 */
+		"HDMI_DDC_CLOCK", /* GPIO_32 */
+		"HDMI_DDC_DATA", /* GPIO_33 */
+		"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+		"PCIE0_RST_N", /* GPIO_35 */
+		"PCIE0_CLKREQ_N", /* GPIO_36 */
+		"PCIE0_WAKE", /* GPIO_37 */
+		"SD_CARD_DET_N", /* GPIO_38 */
+		"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+		"W_DISABLE_N", /* GPIO_40 */
+		"[BLSP9_UART_TX]", /* GPIO_41 */
+		"[BLSP9_UART_RX]", /* GPIO_42 */
+		"[BLSP2_UART_CTS_N]", /* GPIO_43 */
+		"[BLSP2_UART_RFR_N]", /* GPIO_44 */
+		"[BLSP3_UART_TX]", /* GPIO_45 */
+		"[BLSP3_UART_RX]", /* GPIO_46 */
+		"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+		"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+		"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+		"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+		"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+		"[CODEC_INT1_N]", /* GPIO_53 */
+		"[CODEC_INT2_N]", /* GPIO_54 */
+		"[BLSP7_I2C_SDA]", /* GPIO_55 */
+		"[BLSP7_I2C_SCL]", /* GPIO_56 */
+		"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+		"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+		"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+		"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+		"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+		"GPIO-E", /* GPIO_62, LSEC pin 27 */
+		"TP87", /* GPIO_63 */
+		"[CODEC_RST_N]", /* GPIO_64 */
+		"[PCM1_CLK]", /* GPIO_65 */
+		"[PCM1_SYNC]", /* GPIO_66 */
+		"[PCM1_DIN]", /* GPIO_67 */
+		"[PCM1_DOUT]", /* GPIO_68 */
+		"AUDIO_REF_CLK", /* GPIO_69 */
+		"SLIMBUS_CLK", /* GPIO_70 */
+		"SLIMBUS_DATA0", /* GPIO_71 */
+		"SLIMBUS_DATA1", /* GPIO_72 */
+		"NC", /* GPIO_73 */
+		"NC", /* GPIO_74 */
+		"NC", /* GPIO_75 */
+		"NC", /* GPIO_76 */
+		"TP94", /* GPIO_77 */
+		"NC", /* GPIO_78 */
+		"TP95", /* GPIO_79 */
+		"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+		"TP88", /* GPIO_81 */
+		"TP89", /* GPIO_82 */
+		"TP90", /* GPIO_83 */
+		"TP91", /* GPIO_84 */
+		"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+		"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+		"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+		"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+		"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+		"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+		"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+		"NC", /* GPIO_92 */
+		"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+		"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+		"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+		"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+		"NC", /* GPIO_97 */
+		"CAM1_STANDBY_N", /* GPIO_98 */
+		"NC", /* GPIO_99 */
+		"NC", /* GPIO_100 */
+		"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+		"BOOT_CONFIG1", /* GPIO_102 */
+		"USB_HUB_RESET", /* GPIO_103 */
+		"CAM1_RST_N", /* GPIO_104 */
+		"NC", /* GPIO_105 */
+		"NC", /* GPIO_106 */
+		"NC", /* GPIO_107 */
+		"NC", /* GPIO_108 */
+		"NC", /* GPIO_109 */
+		"NC", /* GPIO_110 */
+		"NC", /* GPIO_111 */
+		"NC", /* GPIO_112 */
+		"PMI8994_BUA", /* GPIO_113 */
+		"PCIE2_RST_N", /* GPIO_114 */
+		"PCIE2_CLKREQ_N", /* GPIO_115 */
+		"PCIE2_WAKE", /* GPIO_116 */
+		"SSC_IRQ_0", /* GPIO_117 */
+		"SSC_IRQ_1", /* GPIO_118 */
+		"SSC_IRQ_2", /* GPIO_119 */
+		"NC", /* GPIO_120 */
+		"GPIO121", /* GPIO_121, S HSEC pin 2 */
+		"NC", /* GPIO_122 */
+		"SSC_IRQ_6", /* GPIO_123 */
+		"SSC_IRQ_7", /* GPIO_124 */
+		"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+		"BOOT_CONFIG5", /* GPIO_126 */
+		"NC", /* GPIO_127 */
+		"NC", /* GPIO_128 */
+		"BOOT_CONFIG7", /* GPIO_129 */
+		"PCIE1_RST_N", /* GPIO_130 */
+		"PCIE1_CLKREQ_N", /* GPIO_131 */
+		"PCIE1_WAKE", /* GPIO_132 */
+		"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+		"NC", /* GPIO_134 */
+		"NC", /* GPIO_135 */
+		"BOOT_CONFIG8", /* GPIO_136 */
+		"NC", /* GPIO_137 */
+		"NC", /* GPIO_138 */
+		"GPS_SSBI2", /* GPIO_139 */
+		"GPS_SSBI1", /* GPIO_140 */
+		"NC", /* GPIO_141 */
+		"NC", /* GPIO_142 */
+		"NC", /* GPIO_143 */
+		"BOOT_CONFIG6", /* GPIO_144 */
+		"NC", /* GPIO_145 */
+		"NC", /* GPIO_146 */
+		"NC", /* GPIO_147 */
+		"NC", /* GPIO_148 */
+		"NC"; /* GPIO_149 */
+
+	sdc2_cd_on: sdc2-cd-on-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_cd_off: sdc2-cd-off-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	hdmi_hpd_active: hdmi-hpd-active-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <16>;
+	};
+
+	hdmi_hpd_suspend: hdmi-hpd-suspend-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	hdmi_ddc_active: hdmi-ddc-active-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	hdmi_ddc_suspend: hdmi-ddc-suspend-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie2 {
+	status = "okay";
+	perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"BL1_PWM",
+		"GPIO-F", /* BL0_PWM, LSEC pin 28 */
+		"BL1_EN",
+		"NC",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"DIVCLK1",
+		"DIVCLK2",
+		"DIVCLK3",
+		"DIVCLK4",
+		"BT_EN",
+		"PMIC_SLB",
+		"PMIC_BUA",
+		"USB_VBUS_DET";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
+
+	ls_exp_gpio_f: pm8994-gpio5-state {
+		pinconf {
+			pins = "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+
+	bt_en_gpios: bt-en-pios-state {
+		pinconf {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	wlan_en_gpios: wlan-en-gpios-state {
+		pinconf {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	audio_mclk: clk-div1-state {
+		pinconf {
+			pins = "gpio15";
+			function = "func1";
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+
+	volume_up_gpio: pm8996-gpio2-state {
+		pinconf {
+			pins = "gpio2";
+			function = "normal";
+			input-enable;
+			drive-push-pull;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pinconf {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+
+			bias-disable;
+			power-source = <PM8994_GPIO_S4>;
+		};
+	};
+
+	usb3_vbus_det_gpio: pm8996-gpio22-state {
+		pinconf {
+			pins = "gpio22";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"VDDPX_BIAS",
+		"WIFI_LED",
+		"NC",
+		"BT_LED",
+		"PM_MPP05",
+		"PM_MPP06",
+		"PM_MPP07",
+		"NC";
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+	vdd_s11-supply = <&vph_pwr>;
+
+	s9 {
+		qcom,saw-slave;
+	};
+	s10 {
+		qcom,saw-slave;
+	};
+	s11 {
+		qcom,saw-leader;
+		regulator-name = "VDD_APCC";
+		regulator-always-on;
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",
+		"SPKR_AMP_EN1",
+		"SPKR_AMP_EN2",
+		"TP61",
+		"NC",
+		"USB2_VBUS_DET",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+
+	usb2_vbus_det_gpio: pmi8996-gpio6-state {
+		pinconf {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+};
+
+&pmi8994_lpg {
+	qcom,power-source = <1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmi8994_mpp2_userled4>;
+
+	qcom,dtest = <0 0>,
+		     <0 0>,
+		     <0 0>,
+		     <4 1>;
+
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <1>;
+
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+
+	led@2 {
+		reg = <2>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <0>;
+	};
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <2>;
+	};
+
+	led@4 {
+		reg = <4>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <3>;
+	};
+};
+
+&pmi8994_mpps {
+	pmi8994_mpp2_userled4: mpp2-userled4-state {
+		pins = "mpp2";
+		function = "sink";
+
+		output-low;
+		qcom,dtest = <4>;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+
+	vdd_gfx: s2 {
+		regulator-name = "VDD_GFX";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&vreg_s1b_1p025>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		/**
+		 * 1.8v required on LS expansion
+		 * for mezzanine boards
+		 */
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		vph_pwr_bbyp: boost-bypass {
+			regulator-name = "vph_pwr_bbyp";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_s1b_1p025: s1 {
+			regulator-name = "vreg_s1b_1p025";
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+	};
+};
+
+&sdhc2 {
+	/* External SD card */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&slim_msm {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&div1_mclk>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "DB820c";
+	audio-routing = "RX_BIAS", "MCLK",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI";
+		cpu {
+			sound-dai = <&q6afedai HDMI_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&mdss_hdmi 0>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&usb2 {
+	status = "okay";
+	extcon = <&usb2_id>;
+};
+
+&usb2_dwc3 {
+	extcon = <&usb2_id>;
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&usb3 {
+	status = "okay";
+	extcon = <&usb3_id>;
+};
+
+&usb3_dwc3 {
+	extcon = <&usb3_id>;
+	dr_mode = "otg";
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&venus {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
new file mode 100644
index 0000000000..ac6471d1db
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Inforce 6640 Single Board Computer";
+	compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096";
+
+	qcom,msm-id = <291 0x00030001>;
+	qcom,board-id = <0x00010018 0>;
+
+	aliases {
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	v1p05: v1p05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v1p05";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&v5p0>;
+	};
+
+	v12_poe: v12-poe-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v12_poe";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	v3p3: v3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v3p3";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&v12_poe>;
+	};
+
+	v5p0: v5p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v5p0";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&v12_poe>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_hdmi {
+	status = "okay";
+};
+
+&mdss_hdmi_phy {
+	status = "okay";
+};
+
+&sdc2_state_on {
+	cd-pins {
+		pins = "gpio38";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+};
+
+&sdc2_state_off {
+	cd-pins {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+};
+
+&sdhc2 {
+	status = "okay";
+
+	bus-width = <4>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&venus {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
new file mode 100644
index 0000000000..e636a1cb9b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 MP03.1-C2 board device tree source
+ *
+ * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5018/AP-RDP432.1-C2";
+	compatible = "qcom,ipq5018-rdp432-c2", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <192000000>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio9";
+			function = "sdc1_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio8";
+			function = "sdc1_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "sdc1_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
new file mode 100644
index 0000000000..9f13d2dcdf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 SoC device tree source
+ *
+ * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+#include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq5018", "qcom,scm";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_region: tz@4ac00000 {
+			reg = <0x0 0x4ac00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5018-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 47>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart1_pins: uart1-state {
+				pins = "gpio31", "gpio32", "gpio33", "gpio34";
+				function = "blsp1_uart1";
+				drive-strength = <8>;
+				bias-pull-down;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-ipq5018";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x7804000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "iface", "core", "xo";
+			non-removable;
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,  /* GICD */
+			      <0x0b002000 0x2000>,  /* GICC */
+			      <0x0b001000 0x1000>,  /* GICH */
+			      <0x0b004000 0x2000>;  /* GICV */
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0b00a000 0x1ffa>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xff8>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xff8>;
+				msi-controller;
+			};
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0xb123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
new file mode 100644
index 0000000000..4870cdb764
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP board common device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "ipq5332.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board {
+	clock-frequency = <24000000>;
+};
+
+/* PINCTRL */
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio35";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio36";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
new file mode 100644
index 0000000000..e89e2e9486
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 AP-MI01.2 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332-rdp-common.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.2";
+	compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
+};
+
+&blsp1_i2c1 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio29", "gpio30";
+		function = "blsp1_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
new file mode 100644
index 0000000000..efd480a7af
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP442 board device tree source
+ *
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332-rdp-common.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.3";
+	compatible = "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332";
+};
+
+&blsp1_i2c1 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio29", "gpio30";
+		function = "blsp1_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
new file mode 100644
index 0000000000..f96b0c8c90
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP468 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332-rdp-common.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6";
+	compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* PINCTRL */
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
new file mode 100644
index 0000000000..eb1fa33d6f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP474 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332-rdp-common.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
+	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
+};
+
+&blsp1_i2c1 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* PINCTRL */
+
+&tlmm {
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio29", "gpio30";
+		function = "blsp1_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
new file mode 100644
index 0000000000..e40c55adff
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq5332", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bootloader@4a100000 {
+			reg = <0x0 0x4a100000 0x0 0x400000>;
+			no-map;
+		};
+
+		sbl@4a500000 {
+			reg = <0x0 0x4a500000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_mem: tz@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x200000>;
+			no-map;
+		};
+
+		smem@4a800000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4a800000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x721>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		rng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5332-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 53>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_0_pins: serial0-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp0_uart0";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq5332-gcc";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq5332", "syscon";
+			reg = <0x01937000 0x21000>;
+		};
+
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+
+			interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1d000>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,	/* GICD */
+			      <0x0b002000 0x1000>,	/* GICC */
+			      <0x0b001000 0x1000>,	/* GICH */
+			      <0x0b004000 0x1000>;	/* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <30>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5332-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo_board>;
+			clock-names = "pll", "xo";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq5332-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
new file mode 100644
index 0000000000..f5f4827c0e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ6018 CP01 board device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1";
+	compatible = "qcom,ipq6018-cp01", "qcom,ipq6018";
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&serial_3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_i2c3 {
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tlmm {
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio42", "gpio43";
+		function = "blsp2_i2c";
+		drive-strength = <8>;
+	};
+
+	spi_0_pins: spi-0-state {
+		pins = "gpio38", "gpio39", "gpio40", "gpio41";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&qusb_phy_1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
new file mode 100644
index 0000000000..fc907afe51
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ6018 SoC device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq6018.h>
+#include <dt-bindings/reset/qcom,gcc-ipq6018.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq6018", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <725000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <787500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <862500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	pmuv8: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci: psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,ipq6018-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-ipq6018";
+				qcom,glink-channels = "rpm_requests";
+
+				regulators {
+					compatible = "qcom,rpm-mp5496-regulators";
+
+					ipq6018_s2: s2 {
+						regulator-min-microvolt = <725000>;
+						regulator-max-microvolt = <1062500>;
+						regulator-always-on;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rpm_msg_ram: memory@60000 {
+			reg = <0x0 0x00060000 0x0 0x6000>;
+			no-map;
+		};
+
+		bootloader@4a100000 {
+			reg = <0x0 0x4a100000 0x0 0x400000>;
+			no-map;
+		};
+
+		sbl@4a500000 {
+			reg = <0x0 0x4a500000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz: memory@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+
+		smem_region: memory@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_region: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x5500000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x0 0xffffffff>;
+		dma-ranges;
+		compatible = "simple-bus";
+
+		qusb_phy_1: qusb@59000 {
+			compatible = "qcom,ipq6018-qusb2-phy";
+			reg = <0x0 0x00059000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: ssphy@78000 {
+			compatible = "qcom,ipq6018-qmp-usb3-phy";
+			reg = <0x0 0x00078000 0x0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb0_ssphy: phy@78200 {
+				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
+				      <0x0 0x00078400 0x0 0x200>, /* Rx */
+				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
+				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb0_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_0: qusb@79000 {
+			compatible = "qcom,ipq6018-qusb2-phy";
+			reg = <0x0 0x00079000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		pcie_phy: phy@84000 {
+			compatible = "qcom,ipq6018-qmp-pcie-phy";
+			reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				<&gcc GCC_PCIE0_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			pcie_phy0: phy@84200 {
+				reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
+				      <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
+				      <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_pcie0_pipe_clk_src";
+				#clock-cells = <0>;
+			};
+		};
+
+		mdio: mdio@90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
+			reg = <0x0 0x00090000 0x0 0x64>;
+			clocks = <&gcc GCC_MDIO_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+			status = "disabled";
+		};
+
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq6018-qfprom", "qcom,qfprom";
+			reg = <0x0 0x000a4000 0x0 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		prng: qrng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x0 0x000e3000 0x0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x00704000 0x0 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x0 0x0073a000 0x0 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq6018-pinctrl";
+			reg = <0x0 0x01000000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 80>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_3_pins: serial3-state {
+				pins = "gpio44", "gpio45";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-pull-down;
+			};
+
+			qpic_pins: qpic-state {
+				pins = "gpio1", "gpio3", "gpio4",
+					"gpio5", "gpio6", "gpio7",
+					"gpio8", "gpio10", "gpio11",
+					"gpio12", "gpio13", "gpio14",
+					"gpio15", "gpio17";
+				function = "qpic_pad";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: gcc@1800000 {
+			compatible = "qcom,gcc-ipq6018";
+			reg = <0x0 0x01800000 0x0 0x80000>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,ipq6018-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0x0 0x01905000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq6018", "syscon";
+			reg = <0x0 0x01937000 0x0 0x21000>;
+		};
+
+		usb2: usb@70f8800 {
+			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+			reg = <0x0 0x070f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_USB1_MASTER_CLK>,
+				 <&gcc GCC_USB1_SLEEP_CLK>,
+				 <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <24000000>;
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: usb@7000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x07000000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x07884000 0x0 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart3: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b1000 0x0 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b5000 0x0 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b6000 0x0 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b6000 0x0 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b7000 0x0 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x07984000 0x0 0x1a000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@79b0000 {
+			compatible = "qcom,ipq6018-nand";
+			reg = <0x0 0x079b0000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			pinctrl-0 = <&qpic_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		usb3: usb@8af8800 {
+			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+			reg = <0x0 0x08af8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				"core",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <133330000>,
+					       <24000000>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x08a00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				clocks = <&xo>;
+				clock-names = "ref";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
+			      <0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
+			      <0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
+			      <0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0 0 0 0xb00a000 0 0xffd>;
+
+			v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				msi-controller;
+				reg = <0x0 0x0 0x0 0xffd>;
+			};
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,kpss-wdt";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x0 0x0b017000 0x0 0x40>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <10>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0 0x0b111000 0x0 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo>;
+			clock-names = "pll", "xo";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq6018-a53pll";
+			reg = <0x0 0x0b116000 0x0 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo>;
+			clock-names = "xo";
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x10000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x0b120000 0x0 0x1000>;
+
+			frame@b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		q6v5_wcss: remoteproc@cd00000 {
+			compatible = "qcom,ipq6018-wcss-pil";
+			reg = <0x0 0x0cd00000 0x0 0x4040>,
+			      <0x0 0x004ab000 0x0 0x20>;
+			reg-names = "qdsp6",
+				    "rmb";
+			interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 0 0>,
+					      <&wcss_smp2p_in 1 0>,
+					      <&wcss_smp2p_in 2 0>,
+					      <&wcss_smp2p_in 3 0>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			resets = <&gcc GCC_WCSSAON_RESET>,
+				 <&gcc GCC_WCSS_BCR>,
+				 <&gcc GCC_WCSS_Q6_BCR>;
+
+			reset-names = "wcss_aon_reset",
+				      "wcss_reset",
+				      "wcss_q6_reset";
+
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "prng";
+
+			qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>;
+
+			qcom,smem-states = <&wcss_smp2p_out 0>,
+					   <&wcss_smp2p_out 1>;
+			qcom,smem-state-names = "shutdown",
+						"stop";
+
+			memory-region = <&q6_region>;
+
+			glink-edge {
+				interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+				label = "rtr";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 8>;
+
+				qrtr_requests {
+					qcom,glink-channels = "IPCRTR";
+				};
+			};
+		};
+
+		pcie0: pci@20000000 {
+			compatible = "qcom,pcie-ipq6018";
+			reg = <0x0 0x20000000 0x0 0xf1d>,
+			      <0x0 0x20000f20 0x0 0xa8>,
+			      <0x0 0x20001000 0x0 0x1000>,
+			      <0x0 0x80000 0x0 0x4000>,
+			      <0x0 0x20100000 0x0 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
+
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			max-link-speed = <3>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			phys = <&pcie_phy0>;
+			phy-names = "pciephy";
+
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
+				 <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
+
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+				 <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc PCIE0_RCHNG_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng";
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_SLEEP_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	wcss: wcss-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 322 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 9>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		wcss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 0000000000..5cf07caf41
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "pmp8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+	compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		serial1 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+
+	vreg_dummy: regulator-dummy { };
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&blsp1_uart5 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_qmp0 {
+	status = "okay";
+};
+
+&pcie_qmp1 {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	vqmmc-supply = <&l11>;
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&qusb_phy_1 {
+	status = "okay";
+};
+
+&ssphy_0 {
+	status = "okay";
+	vdda-phy-supply = <&vreg_dummy>;
+	vdda-pll-supply = <&vreg_dummy>;
+};
+
+&ssphy_1 {
+	status = "okay";
+	vdda-phy-supply = <&vreg_dummy>;
+	vdda-pll-supply = <&vreg_dummy>;
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
new file mode 100644
index 0000000000..cc1992ca05
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074-hk10.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C1";
+	compatible = "qcom,ipq8074-hk10-c1", "qcom,ipq8074";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
new file mode 100644
index 0000000000..d7f0efda6b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074-hk10.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2";
+	compatible = "qcom,ipq8074-hk10-c2", "qcom,ipq8074";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
new file mode 100644
index 0000000000..1b8379ba87
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart5 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_qmp0 {
+	status = "okay";
+};
+
+&pcie_qmp1 {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 0000000000..92fd924bbd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Qualcomm Technologies, Inc. IPQ8074";
+	compatible = "qcom,ipq8074";
+	interrupt-parent = <&intc>;
+
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bootloader@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+
+		sbl@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		memory@4ac00000 {
+			reg = <0x0 0x4ac00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq8074", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		ssphy_1: phy@58000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00058000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB1_AUX_CLK>,
+				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB1_PHY_BCR>,
+				<&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb1_ssphy: phy@58200 {
+				reg = <0x00058200 0x130>,     /* Tx */
+				      <0x00058400 0x200>,     /* Rx */
+				      <0x00058800 0x1f8>,     /* PCS */
+				      <0x00058600 0x044>;     /* PCS misc */
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3phy_1_cc_pipe_clk";
+			};
+		};
+
+		qusb_phy_1: phy@59000 {
+			compatible = "qcom,ipq8074-qusb2-phy";
+			reg = <0x00059000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: phy@78000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00078000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				<&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb0_ssphy: phy@78200 {
+				reg = <0x00078200 0x130>,     /* Tx */
+				      <0x00078400 0x200>,     /* Rx */
+				      <0x00078800 0x1f8>,     /* PCS */
+				      <0x00078600 0x044>;     /* PCS misc */
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3phy_0_cc_pipe_clk";
+			};
+		};
+
+		qusb_phy_0: phy@79000 {
+			compatible = "qcom,ipq8074-qusb2-phy";
+			reg = <0x00079000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		pcie_qmp0: phy@84000 {
+			compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
+			reg = <0x00084000 0x1bc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				<&gcc GCC_PCIE0_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+			status = "disabled";
+
+			pcie_phy0: phy@84200 {
+				reg = <0x84200 0x16c>,
+				      <0x84400 0x200>,
+				      <0x84800 0x1f0>,
+				      <0x84c00 0xf4>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "pcie20_phy0_pipe_clk";
+			};
+		};
+
+		pcie_qmp1: phy@8e000 {
+			compatible = "qcom,ipq8074-qmp-pcie-phy";
+			reg = <0x0008e000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				<&gcc GCC_PCIE1_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				<&gcc GCC_PCIE1PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+			status = "disabled";
+
+			pcie_phy1: phy@8e200 {
+				reg = <0x8e200 0x130>,
+				      <0x8e400 0x200>,
+				      <0x8e800 0x1f8>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "pcie20_phy1_pipe_clk";
+			};
+		};
+
+		mdio: mdio@90000 {
+			compatible = "qcom,ipq8074-mdio", "qcom,ipq4019-mdio";
+			reg = <0x00090000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+		};
+
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq8074-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		prng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq8074-tsens";
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x0073a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq8074-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 70>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_4_pins: serial4-state {
+				pins = "gpio23", "gpio24";
+				function = "blsp4_uart1";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			i2c_0_pins: i2c-0-state {
+				pins = "gpio42", "gpio43";
+				function = "blsp1_i2c";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			spi_0_pins: spi-0-state {
+				pins = "gpio38", "gpio39", "gpio40", "gpio41";
+				function = "blsp0_spi";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			hsuart_pins: hsuart-state {
+				pins = "gpio46", "gpio47", "gpio48", "gpio49";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			qpic_pins: qpic-state {
+				pins = "gpio1", "gpio3", "gpio4",
+				       "gpio5", "gpio6", "gpio7",
+				       "gpio8", "gpio10", "gpio11",
+				       "gpio12", "gpio13", "gpio14",
+				       "gpio15", "gpio16", "gpio17";
+				function = "qpic";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: gcc@1800000 {
+			compatible = "qcom,gcc-ipq8074";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq8074", "syscon";
+			reg = <0x01937000 0x21000>;
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x000700>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x7824900 0x500>, <0x7824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			max-frequency = <384000000>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			bus-width = <8>;
+
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart3: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>,
+				<&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&hsuart_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b3000 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-0 = <&serial_4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <100000>;
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c5: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b9000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b9000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078ba000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <100000>;
+			dmas = <&blsp_dma 22>, <&blsp_dma 23>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07984000 0x1a000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@79b0000 {
+			compatible = "qcom,ipq8074-nand";
+			reg = <0x079b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			pinctrl-0 = <&qpic_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		usb_0: usb@8af8800 {
+			compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				"core",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+						<133330000>,
+						<19200000>;
+
+			power-domains = <&gcc USB0_GDSC>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		usb_1: usb@8cf8800 {
+			compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
+			reg = <0x08cf8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+				<&gcc GCC_USB1_MASTER_CLK>,
+				<&gcc GCC_USB1_SLEEP_CLK>,
+				<&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				"core",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+					  <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+						<133330000>,
+						<19200000>;
+
+			power-domains = <&gcc USB1_GDSC>;
+
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: usb@8c00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8c00000 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+			ranges = <0 0xb00a000 0xffd>;
+
+			v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				msi-controller;
+				reg = <0x0 0xffd>;
+			};
+		};
+
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,kpss-wdt";
+			reg = <0xb017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <30>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq8074-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			clocks = <&a53pll>, <&xo>;
+			clock-names = "pll", "xo";
+
+			#clock-cells = <1>;
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq8074-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo>;
+			clock-names = "xo";
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+
+			frame@b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		pcie1: pci@10000000 {
+			compatible = "qcom,pcie-ipq8074";
+			reg = <0x10000000 0xf1d>,
+			      <0x10000f20 0xa8>,
+			      <0x00088000 0x2000>,
+			      <0x10100000 0x1000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			max-link-speed = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			phys = <&pcie_phy1>;
+			phy-names = "pciephy";
+
+			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
+
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 142
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 143
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 144
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 145
+					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
+				 <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "aux";
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_SLEEP_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky";
+			status = "disabled";
+		};
+
+		pcie0: pci@20000000 {
+			compatible = "qcom,pcie-ipq8074-gen3";
+			reg = <0x20000000 0xf1d>,
+			      <0x20000f20 0xa8>,
+			      <0x20001000 0x1000>,
+			      <0x00080000 0x4000>,
+			      <0x20100000 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			max-link-speed = <3>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			phys = <&pcie_phy0>;
+			phy-names = "pciephy";
+
+			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
+
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 75
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 78
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 79
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 83
+					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+				 <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng";
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_SLEEP_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				nss-top-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				nss-0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				nss-1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phya0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				wcss-phya0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phya1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				wcss-phya1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				cpu1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2_thermal: cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				cpu2-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3_thermal: cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				cpu3-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster_thermal: cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cluster-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phyb0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				wcss-phyb0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phyb1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				wcss-phyb1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
new file mode 100644
index 0000000000..2b093e0263
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP418 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
+	compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	max-frequency = <384000000>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2",
+			       "gpio3", "gpio6", "gpio7",
+			       "gpio8", "gpio9";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "gpio10";
+			function = "sdc_rclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
new file mode 100644
index 0000000000..877026ccc6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP433 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
+	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	max-frequency = <384000000>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2",
+			       "gpio3", "gpio6", "gpio7",
+			       "gpio8", "gpio9";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "gpio10";
+			function = "sdc_rclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-supply = <&regulator_fixed_0p925>;
+
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	vdd-supply = <&regulator_fixed_0p925>;
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
new file mode 100644
index 0000000000..c8fa54e1a6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP449 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
+	compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
new file mode 100644
index 0000000000..f01de6628c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP453 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
+	compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
new file mode 100644
index 0000000000..6efae3426c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP454 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
+	compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
new file mode 100644
index 0000000000..8a72ad4afd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -0,0 +1,982 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 SoC device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq9574_s1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq9574_s1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq9574_s1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq9574_s1>;
+			#cooling-cells = <2>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq9574", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-936000000 {
+			opp-hz = /bits/ 64 <936000000>;
+			opp-microvolt = <725000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <787500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <862500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,ipq9574-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-ipq9574";
+				qcom,glink-channels = "rpm_requests";
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bootloader@4a100000 {
+			reg = <0x0 0x4a100000 0x0 0x400000>;
+			no-map;
+		};
+
+		sbl@4a500000 {
+			reg = <0x0 0x4a500000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_region: tz@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+
+		smem@4aa00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x6000>;
+		};
+
+		rng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x5a1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0073a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq9574-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 65>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart2_pins: uart2-state {
+				pins = "gpio34", "gpio35";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq9574-gcc";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq9574", "syscon";
+			reg = <0x01937000 0x21000>;
+		};
+
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "iface", "core", "xo";
+			non-removable;
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart3: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b2000 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart4: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b3000 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b4000 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_spi0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			assigned-clock-rates = <50000000>;
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			assigned-clock-rates = <50000000>;
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+			assigned-clock-rates = <50000000>;
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			spi-max-frequency = <50000000>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+			assigned-clock-rates = <50000000>;
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi4: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		usb_0_qusbphy: phy@7b000 {
+			compatible = "qcom,ipq9574-qusb2-phy";
+			reg = <0x0007b000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@7d000 {
+			compatible = "qcom,ipq9574-qmp-usb3-phy";
+			reg = <0x0007d000 0xa00>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&xo_board_clk>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+
+			status = "disabled";
+		};
+
+		usb3: usb@8af8800 {
+			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_ANOC_USB_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event";
+
+			resets = <&gcc GCC_USB_BCR>;
+			status = "disabled";
+
+			usb_0_dwc3: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,  /* GICD */
+			      <0x0b002000 0x2000>,  /* GICC */
+			      <0x0b001000 0x1000>,  /* GICH */
+			      <0x0b004000 0x2000>;  /* GICV */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <30>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq9574-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a73pll>, <&xo_board_clk>;
+			clock-names = "pll", "xo";
+			#mbox-cells = <1>;
+		};
+
+		a73pll: clock@b116000 {
+			compatible = "qcom,ipq9574-a73pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board_clk>;
+			clock-names = "xo";
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				nss-top-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				ubi_0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				ubi_1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				ubi_2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				ubi_3-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				cpu0_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu0_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				cpu1_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu1_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				cpu2_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu2_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cpu3_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu3_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		wcss-phyb-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				wcss_phyb-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top_glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
new file mode 100644
index 0000000000..84723c9b73
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * NOTE: The original firmware from Acer can only boot 32-bit kernels.
+ * To boot this device tree using arm64 it is necessary to flash 64-bit
+ * TZ/HYP firmware (e.g. taken from the DragonBoard 410c).
+ * See https://wiki.postmarketos.org/wiki/Acer_Iconia_Talk_S_(acer-a1-724)
+ * for suggested installation instructions.
+ */
+
+/ {
+	model = "Acer Iconia Talk S A1-724";
+	compatible = "acer,a1-724", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+
+		mount-matrix = "0", "-1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		/* Actually ft5446 */
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l16>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
new file mode 100644
index 0000000000..47da738661
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Alcatel OneTouch Idol 3 (4.7)";
+	compatible = "alcatel,idol347", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default>;
+
+		led-0 {
+			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "torch";
+			function = LED_FUNCTION_TORCH;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	touchscreen@26 {
+		compatible = "mstar,msg2638";
+		reg = <0x26>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_reset_default>;
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+		touchscreen-size-x = <2048>;
+		touchscreen-size-y = <2048>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mag_reset_default>;
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
+	};
+
+	accelerometer@f {
+		compatible = "kionix,kxtj21009";
+		reg = <0x0f>;
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "-1";
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&proximity_int_default>;
+	};
+
+	gyroscope@68 {
+		compatible = "bosch,bmg160";
+		reg = <0x68>;
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <97 IRQ_TYPE_EDGE_RISING>,
+			     <98 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gyro_int_default>;
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	led-controller@68 {
+		compatible = "si-en,sn3190";
+		reg = <0x68>;
+		shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_enable_default &led_shutdown_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gyro_int_default: gyro-int-default-state {
+		pins = "gpio97", "gpio98";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	/*
+	 * The OEM wired an additional GPIO to be asserted so that
+	 * the si-en,sn3190 LED IC works. Since this GPIO is not
+	 * part of the IC datasheet nor supported by the driver,
+	 * force it asserted here.
+	 */
+	led_enable_default: led-enable-default-state {
+		pins = "gpio102";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	led_shutdown_default: led-shutdown-default-state {
+		pins = "gpio89";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio8";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	proximity_int_default: proximity-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_reset_default: ts-int-reset-default-state {
+		pins = "gpio13", "gpio100";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio69";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
new file mode 100644
index 0000000000..92f6954817
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Asus Zenfone 2 Laser";
+	compatible = "asus,z00l", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		button-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reg_sd_vmmc: regulator-sdcard-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard-vmmc";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_vmmc_en_default>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+
+		vdd-supply = <&pm8916_l8>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mag_reset_default>;
+	};
+
+	imu@68 {
+		compatible = "invensense,mpu6515";
+		reg = <0x68>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <36 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&imu_default>;
+
+		mount-matrix = "1",  "0", "0",
+			       "0", "-1", "0",
+			       "0",  "0", "1";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l11>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+	vmmc-supply = <&reg_sd_vmmc>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio117";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	imu_default: imu-default-state {
+		pins = "gpio36";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio112";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sd_vmmc_en_default: sd-vmmc-en-default-state {
+		pins = "gpio87";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		touch-pins {
+			pins = "gpio13";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
new file mode 100644
index 0000000000..4aeeee24ce
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "GPLUS FL8005A";
+	compatible = "gplus,fl8005a", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	flash-led-controller {
+		/* Actually qcom,leds-gpio-flash */
+		compatible = "sgmicro,sgm3140";
+		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&camera_flash_default>;
+		pinctrl-names = "default";
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-red {
+			function = LED_FUNCTION_CHARGING;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+		};
+
+		led-green {
+			function = LED_FUNCTION_CHARGING;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		/* Actually ft5402 */
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l17>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <500>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	camera_flash_default: camera-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-led-default-state {
+		pins = "gpio117", "gpio118";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
new file mode 100644
index 0000000000..484e488a5e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Stephan Gerhold
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/*
+ * Note: The original firmware from Huawei can only boot 32-bit kernels.
+ * To boot this device tree using arm64 it is necessary to flash 64-bit TZ/HYP
+ * firmware (e.g. taken from the DragonBoard 410c).
+ * See https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7)
+ * for suggested installation instructions.
+ */
+
+/ {
+	model = "Huawei Ascend G7";
+	compatible = "huawei,g7", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default>;
+
+		led-0 {
+			gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+		};
+
+		led-1 {
+			gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+		};
+
+		led-2 {
+			gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mag_reset_default>;
+	};
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq_default>;
+
+		mount-matrix = "-1", "0", "0",
+				"0", "1", "0",
+				"0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <100000>;
+		amstaos,proximity-diodes = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_irq_default>;
+	};
+
+	regulator@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&reg_lcd_en_default>;
+
+		reg_lcd_pos: outp {
+			regulator-name = "outp";
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
+			enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>;
+			regulator-active-discharge = <1>;
+		};
+
+		reg_lcd_neg: outn {
+			regulator-name = "outn";
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
+			enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+			regulator-active-discharge = <1>;
+		};
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	rmi4@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l16>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_irq_default>;
+
+		syna,startup-delay-ms = <100>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>; /* Allow sleeping */
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>; /* Touchscreen */
+		};
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&lpass {
+	status = "okay";
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&pm8916_codec {
+	status = "okay";
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_l8 {
+	regulator-min-microvolt = <2950000>;
+	regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	/*
+	 * The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>.
+	 * However, gpio38 does not change its state when inserting/removing the
+	 * SD card, it's just low all the time. The Huawei kernel seems to use
+	 * polling for SD card detection instead.
+	 *
+	 * However, looking closer at the GPIO debug output it turns out that
+	 * gpio56 switches its state when inserting/removing the SD card.
+	 * It behaves just like gpio38 normally does. Usually GPIO56 is used as
+	 * "UIM2_PRESENT", i.e. to check if a second SIM card is inserted.
+	 * Maybe Huawei decided to replace the second SIM card slot with the
+	 * SD card slot and forgot to re-route to gpio38.
+	 */
+	cd-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	status = "okay";
+
+	model = "msm8916";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS External2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+
+	primary-dai-link {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	tertiary-dai-link {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	accel_irq_default: accel-irq-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio8", "gpio9", "gpio10";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		pins = "gpio2", "gpio20", "gpio21";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio36";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	prox_irq_default: prox-irq-default-state {
+		pins = "gpio113";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	reg_lcd_en_default: reg-lcd-en-default-state {
+		pins = "gpio32", "gpio97";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio56";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_irq_default: ts-irq-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio117";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
new file mode 100644
index 0000000000..4efc534b1d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Longcheer L8150";
+	compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */
+		/delete-node/ wcnss@89300000;
+
+		wcnss_mem: wcnss@8b600000 {
+			reg = <0x0 0x8b600000 0x0 0x600000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reg_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "ctp";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ctp_pwr_en_default>;
+	};
+
+	flash-led-controller {
+		compatible = "sgmicro,sgm3140";
+		flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_flash_default>;
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		led@0 {
+			reg = <0>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			reg = <2>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@10 {
+		compatible = "bosch,bmc156_accel";
+		reg = <0x10>;
+
+		/*
+		 * For some reason the interrupt line is usually not connected
+		 * to the BMC156. However, there are two pads next to the chip
+		 * that can be shorted to make it work if needed.
+		 *
+		 * interrupt-parent = <&tlmm>;
+		 * interrupts = <116 IRQ_TYPE_EDGE_RISING>;
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		mount-matrix = "0", "1", "0",
+			      "-1", "0", "0",
+			       "0", "0", "1";
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmc156_magn";
+		reg = <0x12>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&magn_int_default>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+
+	light-sensor@23 {
+		compatible = "liteon,ltr559";
+		reg = <0x23>;
+		proximity-near-level = <75>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&light_int_default>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+
+	gyroscope@68 {
+		compatible = "bosch,bmg160";
+		reg = <0x68>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <23 IRQ_TYPE_EDGE_RISING>,
+			     <22 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gyro_int_default>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	rmi4@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&reg_ctp>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_default>;
+
+		syna,startup-delay-ms = <10>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>; /* Allow sleeping */
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>; /* Touchscreen */
+		};
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_usbin {
+	status = "okay";
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+	non-removable;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+	extcon = <&pm8916_usbin>;
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio116";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	camera_flash_default: camera-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ctp_pwr_en_default: ctp-pwr-en-default-state {
+		pins = "gpio17";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gyro_int_default: gyro-int-default-state {
+		pins = "gpio22", "gpio23";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	light_int_default: light-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	magn_int_default: magn-int-default-state {
+		pins = "gpio113";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tp_int_default: tp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
new file mode 100644
index 0000000000..d73294af1a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "BQ Aquaris X5 (Longcheer L8910)";
+	compatible = "longcheer,l8910", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	flash-led-controller {
+		compatible = "ocs,ocp8110";
+		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&camera_front_flash_default>;
+		pinctrl-names = "default";
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			default-state = "off";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&button_backlight_default>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c3 {
+	status = "okay";
+
+	magnetometer@d {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0d>;
+
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mag_reset_default>;
+	};
+
+	imu@68 {
+		compatible = "bosch,bmi160";
+		reg = <0x68>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		mount-matrix = "0", "1", "0",
+			      "-1", "0", "0",
+			       "0", "0", "1";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	button_backlight_default: button-backlight-default-state {
+		pins = "gpio17";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	camera_front_flash_default: camera-front-flash-default-state {
+		pins = "gpio49", "gpio119";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio111";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
new file mode 100644
index 0000000000..ac527a3a08
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
+	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp_uart2;
+		usid0 = &pm8916_0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
new file mode 100644
index 0000000000..b1a7eafbee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * msm8916-pm8916.dtsi describes common properties (e.g. regulator connections)
+ * that apply to most devices that make use of the MSM8916 SoC and PM8916 PMIC.
+ * Many regulators have a fixed purpose in the original reference design and
+ * were rarely re-used for different purposes. Devices that deviate from the
+ * typical reference design should not make use of this include and instead add
+ * the necessary properties in the board-specific device tree.
+ */
+
+#include "msm8916.dtsi"
+#include "pm8916.dtsi"
+
+&camss {
+	vdda-supply = <&pm8916_l2>;
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8916_l2>;
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi0_phy {
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mpss {
+	pll-supply = <&pm8916_l7>;
+};
+
+&pm8916_codec {
+	vdd-cdc-io-supply = <&pm8916_l5>;
+	vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+	vdd-micbias-supply = <&pm8916_l13>;
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8916_l8>;
+	vqmmc-supply = <&pm8916_l5>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8916_l11>;
+	vqmmc-supply = <&pm8916_l12>;
+};
+
+&usb_hs_phy {
+	v1p8-supply = <&pm8916_l7>;
+	v3p3-supply = <&pm8916_l13>;
+};
+
+&wcnss {
+	vddpx-supply = <&pm8916_l7>;
+};
+
+&wcnss_iris {
+	vddxo-supply = <&pm8916_l7>;
+	vddrfa-supply = <&pm8916_s3>;
+	vddpa-supply = <&pm8916_l9>;
+	vdddig-supply = <&pm8916_l5>;
+};
+
+&rpm_requests {
+	pm8916_rpm_regulators: regulators {
+		compatible = "qcom,rpm-pm8916-regulators";
+		vdd_l1_l2_l3-supply = <&pm8916_s3>;
+		vdd_l4_l5_l6-supply = <&pm8916_s4>;
+		vdd_l7-supply = <&pm8916_s4>;
+
+		/* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
+
+		pm8916_s3: s3 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on; /* Needed for L2 */
+		};
+
+		pm8916_s4: s4 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-always-on; /* Needed for L5/L7 */
+		};
+
+		/*
+		 * Some of the regulators are unused or managed by another
+		 * processor (e.g. the modem). We should still define nodes for
+		 * them to ensure the vote from the application processor can be
+		 * dropped in case the regulators are already on during boot.
+		 *
+		 * The labels for these nodes are omitted on purpose because
+		 * boards should configure a proper voltage before using them.
+		 */
+		l1 {};
+
+		pm8916_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on; /* Needed for LPDDR RAM */
+		};
+
+		/* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */
+
+		l4 {};
+
+		pm8916_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for most digital I/O */
+		};
+
+		pm8916_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8916_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for CPU PLL */
+		};
+
+		pm8916_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8916_l9: l9 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		l10 {};
+
+		pm8916_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8916_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8916_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		l14 {};
+		l15 {};
+		l16 {};
+		l17 {};
+		l18 {};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
new file mode 100644
index 0000000000..019bf73178
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&motor_pwm_default>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	/*
+	 * NOTE: A5 connects GPIO 76 to a reglator powering the motor
+	 * driver IC but A3 connects the same signal to an ENABLE pin of
+	 * the driver.
+	 */
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&motor_en_default>;
+	};
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp_a";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default>;
+	};
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		muic: extcon@25 {
+			compatible = "siliconmitus,sm5502-muic";
+
+			reg = <0x25>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&muic_int_default>;
+		};
+	};
+
+	i2c-tkey {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey: touchkey@20 {
+			/* Note: Actually an ABOV MCU that implements same interface */
+			compatible = "coreriver,tc360-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
+
+			/* vcc/vdd-supply are board-specific */
+			vddio-supply = <&pm8916_l6>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&tkey_default>;
+		};
+	};
+
+	i2c-nfc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nfc@27 {
+			compatible = "samsung,s3fwrn5-i2c";
+			reg = <0x27>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+			en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+			clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&nfc_default &nfc_clk_req>;
+		};
+	};
+
+	vibrator: vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&reg_motor_vdd>;
+		status = "disabled";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer: accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	battery@35 {
+		compatible = "richtek,rt5033-battery";
+		reg = <0x35>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fg_alert_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_default>;
+	pinctrl-1 = <&mdss_sleep>;
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&muic>, <&muic>;
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fg_alert_default: fg-alert-default-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdss_default: mdss-default-state {
+		pins = "gpio25";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-disable;
+	};
+	mdss_sleep: mdss-sleep-state {
+		pins = "gpio25";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	motor_en_default: motor-en-default-state {
+		pins = "gpio76";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default: motor-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	muic_i2c_default: muic-i2c-default-state {
+		pins = "gpio105", "gpio106";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		irq-pins {
+			pins = "gpio21";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	nfc_i2c_default: nfc-i2c-default-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_default: tkey-default-state {
+		pins = "gpio98";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_i2c_default: tkey-i2c-default-state {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&pm8916_gpios {
+	nfc_clk_req: nfc-clk-req-state {
+		pins = "gpio2";
+		function = "func1";
+
+		input-enable;
+		bias-disable;
+		power-source = <PM8916_GPIO_L2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
new file mode 100644
index 0000000000..e5a569698c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-a2015-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy A3U (EUR)";
+	compatible = "samsung,a3u-eur", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reg_panel_vdd3: regulator-panel-vdd3 {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_vdd3";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_vdd3_default>;
+	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
+
+	reg_key_led: regulator-key-led {
+		compatible = "regulator-fixed";
+		regulator-name = "key_led";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_led_en_default>;
+	};
+};
+
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_key_led>;
+};
+
+&accelerometer {
+	mount-matrix = "0", "1", "0",
+		       "1", "0", "0",
+		       "0", "0", "1";
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt541";
+
+		reg = <0x20>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <540>;
+		touchscreen-size-y = <960>;
+
+		vcca-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default>;
+	};
+};
+
+&clk_pwm {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	panel@0 {
+		reg = <0>;
+
+		compatible = "samsung,s6e88a0-ams452ef01";
+
+		vdd3-supply = <&reg_panel_vdd3>;
+		vci-supply = <&pm8916_l17>;
+		reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&panel_in>;
+};
+
+&vibrator {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	panel_vdd3_default: panel-vdd3-default-state {
+		pins = "gpio9";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio86";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_led_en_default: tkey-led-en-default-state {
+		pins = "gpio60";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
new file mode 100644
index 0000000000..388482a1e3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-a2015-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy A5U (EUR)";
+	compatible = "samsung,a5u-eur", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
+};
+
+&accelerometer {
+	mount-matrix = "-1", "0", "0",
+			"0", "1", "0",
+			"0", "0", "1";
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "melfas,mms345l";
+
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		avdd-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default>;
+	};
+};
+
+&clk_pwm {
+	status = "okay";
+};
+
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_touch_key>;
+};
+
+&vibrator {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&tlmm {
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio97";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
new file mode 100644
index 0000000000..6f65fd4b3e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-samsung-a2015-common.dtsi"
+
+/ {
+	haptic {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor_vdd>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+
+	i2c-muic {
+		/* SM5504 MUIC instead of SM5502 */
+		/delete-node/ extcon@25;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&muic_int_default>;
+		};
+	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
+};
+
+&blsp_i2c2 {
+	/* lis2hh12 accelerometer instead of BMC150 */
+	/delete-node/ accelerometer@10;
+	/delete-node/ magnetometer@12;
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+
+		vdd-supply = <&pm8916_l5>;
+		vddio-supply = <&pm8916_l5>;
+
+		st,drdy-int-pin = <1>;
+		mount-matrix = "1", "0", "0",
+			       "0", "-1", "0",
+			       "0", "0", "1";
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&reg_motor_vdd {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_touch_key>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio97";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts
new file mode 100644
index 0000000000..fad2535255
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-e2015-common.dtsi"
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some
+ * variants.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on 32-bit devices at the
+ * moment, even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ * arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts
+ */
+
+/ {
+	model = "Samsung Galaxy E5";
+	compatible = "samsung,e5", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "melfas,mms345l";
+		reg = <0x48>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		avdd-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&ts_int_default>;
+		pinctrl-names = "default";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts
new file mode 100644
index 0000000000..b412b61ca2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-e2015-common.dtsi"
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some
+ * variants.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on 32-bit devices at the
+ * moment, even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ * arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts
+ */
+
+/ {
+	model = "Samsung Galaxy E7";
+	compatible = "samsung,e7", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&pm8916_l17 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
new file mode 100644
index 0000000000..3f145dde40
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-e2015-common.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some
+ * variants.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on 32-bit devices at the
+ * moment, even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ * arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts
+ */
+
+/ {
+	model = "Samsung Galaxy Grand Max";
+	compatible = "samsung,grandmax", "qcom,msm8916";
+	chassis-type = "handset";
+
+	/delete-node/ gpio-hall-sensor;
+	/delete-node/ i2c-nfc;
+	/delete-node/ i2c-tkey;
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		led-keyled {
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+
+			gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio_leds_default>;
+		};
+	};
+};
+
+&reg_motor_vdd {
+	gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
+};
+
+&reg_touch_key {
+	status = "disabled";
+};
+
+&tlmm {
+	gpio_leds_default: gpio-led-default-state {
+		pins = "gpio60";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&motor_en_default {
+	pins = "gpio72";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
new file mode 100644
index 0000000000..54d648972d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		home-button {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		hall-sensor-switch {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77849-battery";
+		reg = <0x36>;
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4400>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	light-sensor@10 {
+		compatible = "capella,cm3323";
+		reg = <0x10>;
+	};
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+
+		st,drdy-int-pin = <1>;
+		mount-matrix = "0", "1", "0",
+			      "-1", "0", "0",
+			       "0", "0", "1";
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+/* FIXME: Replace with MAX77849 MUIC when driver is available */
+&pm8916_usbin {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "peripheral";
+	extcon = <&pm8916_usbin>;
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fuelgauge_int_default: fuelgauge-int-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
new file mode 100644
index 0000000000..48111c6a2c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-gt5-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab A 9.7 (2015)";
+	compatible = "samsung,gt510", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-0 = <&motor_pwm_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&reg_motor_vdd>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&reg_tsp_1p8v>;
+		vdda-supply = <&reg_tsp_3p3v>;
+
+		reset-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&tsp_int_rst_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	motor_en_default: motor-en-default-state {
+		pins = "gpio76";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default: motor-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default: tsp-int-rst-default-state {
+		pins = "gpio13", "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
new file mode 100644
index 0000000000..98ceaad7fc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-gt5-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab A 8.0 (2015)";
+	compatible = "samsung,gt58", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	reg_vdd_tsp: regulator-vdd-tsp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&vibrator_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt532";
+		reg = <0x20>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+
+		vcca-supply = <&reg_vdd_tsp>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	reg_tsp_en_default: reg-tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	vibrator_en_default: vibrator-en-default-state {
+		pins = "gpio76";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
new file mode 100644
index 0000000000..cb0e4a7faf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio_hall_sensor: gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home Key";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	i2c_muic: i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		muic: extcon@25 {
+			compatible = "siliconmitus,sm5703-muic";
+			reg = <0x25>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&muic_int_default>;
+		};
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@50 {
+		compatible = "imagis,ist3038c";
+		reg = <0x50>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	muic_i2c_default: muic-i2c-default-state {
+		pins = "gpio105", "gpio106";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
new file mode 100644
index 0000000000..3e1ff5b4d2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-j5-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy J5 (2015)";
+	compatible = "samsung,j5", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&blsp_i2c5 {
+	status = "disabled";
+};
+
+&touchscreen {
+	/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
+};
+
+&usb_hs_phy {
+	qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
new file mode 100644
index 0000000000..b2fe109723
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-j5-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy J5 (2016)";
+	compatible = "samsung,j5x", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp_a";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_ldo_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&muic {
+	interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&touchscreen {
+	vdd-supply = <&reg_vdd_tsp_a>;
+};
+
+&tlmm {
+	tsp_ldo_en_default: tsp-ldo-en-default-state {
+		pins = "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&muic_int_default {
+	pins = "gpio121";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
new file mode 100644
index 0000000000..eaf8773789
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 Stephan Gerhold
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on this device at the moment,
+ * even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ *   arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
+ */
+
+/ {
+	model = "Samsung Galaxy S4 Mini Value Edition";
+	compatible = "samsung,serranove", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	reg_vdd_tsp: regulator-vdd-tsp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default>;
+	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
+
+	reg_key_led: regulator-key-led {
+		compatible = "regulator-fixed";
+		regulator-name = "key_led";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_led_en_default>;
+	};
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&muic_irq_default>;
+
+			usb_con: connector {
+				compatible = "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+			};
+		};
+	};
+
+	i2c-tkey {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "coreriver,tc360-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&reg_touch_key>;
+			vdd-supply = <&reg_key_led>;
+			vddio-supply = <&pm8916_l6>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&tkey_default>;
+		};
+	};
+
+	i2c-nfc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nfc@2b {
+			compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+			reg = <0x2b>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&nfc_default>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		precharge-current-microamp = <450000>;
+		constant-charge-current-max-microamp = <1000000>;
+		charge-term-current-microamp = <150000>;
+		precharge-upper-limit-microvolt = <3500000>;
+		constant-charge-voltage-max-microvolt = <4350000>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	imu@6b {
+		compatible = "st,lsm6ds3";
+		reg = <0x6b>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&imu_irq_default>;
+	};
+
+	magnetometer@2e {
+		compatible = "yamaha,yas537";
+		reg = <0x2e>;
+
+		mount-matrix = "0",  "1",  "0",
+			       "1",  "0",  "0",
+			       "0",  "0", "-1";
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	fuel-gauge@35 {
+		compatible = "richtek,rt5033-battery";
+		reg = <0x35>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fg_alert_default>;
+
+		power-supplies = <&rt5033_charger>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt541";
+		reg = <0x20>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <540>;
+		touchscreen-size-y = <960>;
+
+		vdd-supply = <&reg_vdd_tsp>;
+		vddo-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_irq_default>;
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_default>;
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+			rt5033_reg_ldo: LDO {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+			rt5033_reg_buck: BUCK {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+
+		rt5033_charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+	non-removable;
+
+	/*
+	 * FIXME: Disable UHS-I modes since tuning fails with:
+	 *
+	 * sdhci_msm 7864900.sdhci: mmc1: No tuning point found
+	 * mmc1: tuning execution failed: -5
+	 * mmc1: error -5 whilst initialising SD card
+	 *
+	 * This is the quirk used on downstream, which suggests this is
+	 * a hardware limitation. However, probing a card using DDR50 works
+	 * (without tuning), so maybe only tuning is broken?
+	 */
+	no-1-8-v;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&muic>, <&muic>;
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&tlmm {
+	fg_alert_default: fg-alert-default-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	imu_irq_default: imu-irq-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_i2c_default: muic-i2c-default-state {
+		pins = "gpio105", "gpio106";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_irq_default: muic-irq-default-state {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+		irq-pins {
+			pins = "gpio21";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	nfc_i2c_default: nfc-i2c-default-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio62";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_default: tkey-default-state {
+		pins = "gpio98";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio86";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_i2c_default: tkey-i2c-default-state {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_led_en_default: tkey-led-en-default-state {
+		pins = "gpio60";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_irq_default: tsp-irq-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
new file mode 100644
index 0000000000..6fe1850ba2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-ufi.dtsi"
+
+/ {
+	model = "uf896 4G Modem Stick";
+	compatible = "thwc,uf896", "qcom,msm8916";
+};
+
+&button_restart {
+	gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+};
+
+&led_r {
+	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+};
+
+&led_g {
+	gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+};
+
+&led_b {
+	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+&button_default {
+	pins = "gpio35";
+	bias-pull-up;
+};
+
+&gpio_leds_default {
+	pins = "gpio81", "gpio82", "gpio83";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
new file mode 100644
index 0000000000..16d4a91022
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-ufi.dtsi"
+
+/ {
+	model = "ufi-001c/ufi-001b 4G Modem Stick";
+	compatible = "thwc,ufi001c", "qcom,msm8916";
+};
+
+&button_restart {
+	gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+};
+
+&led_r {
+	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+};
+
+&led_g {
+	gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+};
+
+&led_b {
+	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+};
+
+&mpss {
+	pinctrl-0 = <&sim_ctrl_default>;
+	pinctrl-names = "default";
+};
+
+&button_default {
+	pins = "gpio37";
+	bias-pull-down;
+};
+
+&gpio_leds_default {
+	pins = "gpio20", "gpio21", "gpio22";
+};
+
+/* This selects the external SIM card slot by default */
+&tlmm {
+	sim_ctrl_default: sim-ctrl-default-state {
+		esim-sel-pins {
+			pins = "gpio0", "gpio3";
+			function = "gpio";
+			bias-disable;
+			output-low;
+		};
+
+		sim-en-pins {
+			pins = "gpio1";
+			function = "gpio";
+			bias-disable;
+			output-low;
+		};
+
+		sim-sel-pins {
+			pins = "gpio2";
+			function = "gpio";
+			bias-disable;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
new file mode 100644
index 0000000000..004a129a2e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chassis-type = "embedded";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		mpss_mem: mpss@86800000 {
+			reg = <0x0 0x86800000 0x0 0x5500000>;
+			no-map;
+		};
+
+		gps_mem: gps@8bd00000 {
+			reg = <0x0 0x8bd00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		/* GPIO is board-specific */
+		button_restart: button-restart {
+			label = "Restart";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		/*
+		 * GPIOs are board-specific.
+		 * Functions and default-states defined here are fallbacks.
+		 * Feel free to override them if your board is different.
+		 */
+		led_r: led-r {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+		};
+
+		led_g: led-g {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_WLAN;
+		};
+
+		led_b: led-b {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_WAN;
+		};
+	};
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */
+&gcc {
+	clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
+};
+
+&mpss {
+	status = "okay";
+};
+
+&pm8916_usbin {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&pm8916_usbin>;
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	/* pins are board-specific */
+	button_default: button-default-state {
+		function = "gpio";
+		drive-strength = <2>;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
new file mode 100644
index 0000000000..43078b890d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Stephan Gerhold
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Xiaomi Redmi 2 (Wingtech WT88047)";
+	compatible = "wingtech,wt88047", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	flash-led-controller {
+		compatible = "ocs,ocp8110";
+		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_flash_default>;
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	imu@68 {
+		compatible = "invensense,mpu6880";
+		reg = <0x68>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&imu_default>;
+
+		mount-matrix = "1",  "0", "0",
+			       "0", "-1", "0",
+			       "0",  "0", "1";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		/* Likely some other model but works just fine with this one */
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l17>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
+
+		led@0 {
+			reg = <0>;
+			led-max-microamp = <15000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-max-microamp = <15000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			reg = <2>;
+			led-max-microamp = <15000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		/*
+		 * L16 is only used for AW2013 which is fine with 2.5-3.3V.
+		 * Use the recommended typical voltage of 2.8V as minimum.
+		 */
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+	non-removable;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	camera_flash_default: camera-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	imu_default: imu-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
new file mode 100644
index 0000000000..5e6ba8c58b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-ufi.dtsi"
+
+/ {
+	model = "uz801 v3.0 4G Modem Stick";
+	compatible = "yiming,uz801-v3", "qcom,msm8916";
+};
+
+&button_restart {
+	gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
+};
+
+&led_r {
+	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+};
+
+&led_g {
+	gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+};
+
+&led_b {
+	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+};
+
+&button_default {
+	pins = "gpio23";
+	bias-pull-up;
+};
+
+&gpio_leds_default {
+	pins = "gpio6", "gpio7", "gpio8";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
new file mode 100644
index 0000000000..961ceb83a9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -0,0 +1,2682 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8916.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz-apps@86000000 {
+			reg = <0x0 0x86000000 0x0 0x300000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		hypervisor@86400000 {
+			reg = <0x0 0x86400000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz@86500000 {
+			reg = <0x0 0x86500000 0x0 0x180000>;
+			no-map;
+		};
+
+		reserved@86680000 {
+			reg = <0x0 0x86680000 0x0 0x80000>;
+			no-map;
+		};
+
+		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86700000 0x0 0xe0000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		rfsa@867e0000 {
+			reg = <0x0 0x867e0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86800000 {
+			reg = <0x0 0x86800000 0x0 0x2b00000>;
+			no-map;
+		};
+
+		wcnss_mem: wcnss@89300000 {
+			reg = <0x0 0x89300000 0x0 0x600000>;
+			no-map;
+		};
+
+		venus_mem: venus@89900000 {
+			reg = <0x0 0x89900000 0x0 0x600000>;
+			no-map;
+		};
+
+		mba_mem: mba@8ea00000 {
+			no-map;
+			reg = <0 0x8ea00000 0 0x100000>;
+		};
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu0_acc>;
+			qcom,saw = <&cpu0_saw>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu1_acc>;
+			qcom,saw = <&cpu1_saw>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu2_acc>;
+			qcom,saw = <&cpu2_saw>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu3_acc>;
+			qcom,saw = <&cpu3_saw>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <130>;
+				exit-latency-us = <150>;
+				min-residency-us = <2000>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+
+			CLUSTER_RET: cluster-retention {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000012>;
+				entry-latency-us = <500>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_PWRDN: cluster-gdhs {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000032>;
+				entry-latency-us = <2000>;
+				exit-latency-us = <2000>;
+				min-residency-us = <6000>;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8916-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		hexagon_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		qfprom: qfprom@5c000 {
+			compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
+			reg = <0x0005c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 7>;
+			};
+
+			tsens_s0_p1: s0-p1@d0 {
+				reg = <0xd0 0x2>;
+				bits = <7 5>;
+			};
+
+			tsens_s0_p2: s0-p2@d1 {
+				reg = <0xd1 0x2>;
+				bits = <4 5>;
+			};
+
+			tsens_s1_p1: s1-p1@d2 {
+				reg = <0xd2 0x1>;
+				bits = <1 5>;
+			};
+			tsens_s1_p2: s1-p2@d2 {
+				reg = <0xd2 0x2>;
+				bits = <6 5>;
+			};
+			tsens_s2_p1: s2-p1@d3 {
+				reg = <0xd3 0x1>;
+				bits = <3 5>;
+			};
+
+			tsens_s2_p2: s2-p2@d4 {
+				reg = <0xd4 0x1>;
+				bits = <0 5>;
+			};
+
+			// no tsens with hw_id 3
+
+			tsens_s4_p1: s4-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <5 5>;
+			};
+
+			tsens_s4_p2: s4-p2@d5 {
+				reg = <0xd5 0x1>;
+				bits = <2 5>;
+			};
+
+			tsens_s5_p1: s5-p1@d5 {
+				reg = <0xd5 0x2>;
+				bits = <7 5>;
+			};
+
+			tsens_s5_p2: s5-p2@d6 {
+				reg = <0xd6 0x2>;
+				bits = <4 5>;
+			};
+
+			tsens_base2: base2@d7 {
+				reg = <0xd7 0x1>;
+				bits = <1 7>;
+			};
+
+			tsens_mode: mode@ef {
+				reg = <0xef 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		sram@290000 {
+			compatible = "qcom,msm8916-rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8916-bimc";
+			reg = <0x00400000 0x62000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+
+			// no hw_id 3
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2";
+			#qcom,sensors = <5>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8916-pcnoc";
+			reg = <0x00500000 0x11000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8916-snoc";
+			reg = <0x00580000 0x14000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		stm: stm@802000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x00802000 0x1000>,
+			      <0x09280000 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		/* System CTIs */
+		/* CTI 0 - TMC connections */
+		cti0: cti@810000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x00810000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		/* CTI 1 - TPIU connections */
+		cti1: cti@811000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x00811000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		/* CTIs 2-11 - no information - not instantiated */
+
+		tpiu: tpiu@820000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x00820000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel0: funnel@821000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x00821000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - connected to Resource and Power Manger CPU ETM
+				 * 1 - not-connected
+				 * 2 - connected to Modem CPU ETM
+				 * 3 - not-connected
+				 * 5 - not-connected
+				 * 6 - connected trought funnel to Wireless CPU ETM
+				 * 7 - connected to STM component
+				 */
+
+				port@4 {
+					reg = <4>;
+					funnel0_in4: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator: replicator@824000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x00824000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf: etf@825000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x00825000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etr: etr@826000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x00826000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		funnel1: funnel@841000 {	/* APSS funnel only 4 inputs are used */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x00841000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel1_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					funnel1_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					funnel1_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					funnel1_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&funnel0_in4>;
+					};
+				};
+			};
+		};
+
+		debug0: debug@850000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00850000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU0>;
+			status = "disabled";
+		};
+
+		debug1: debug@852000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00852000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU1>;
+			status = "disabled";
+		};
+
+		debug2: debug@854000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00854000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU2>;
+			status = "disabled";
+		};
+
+		debug3: debug@856000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00856000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU3>;
+			status = "disabled";
+		};
+
+		/* Core CTIs; CTIs 12-15 */
+		/* CTI - CPU-0 */
+		cti12: cti@858000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x00858000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+			arm,cs-dev-assoc = <&etm0>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-1 */
+		cti13: cti@859000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x00859000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+			arm,cs-dev-assoc = <&etm1>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-2 */
+		cti14: cti@85a000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x0085a000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+			arm,cs-dev-assoc = <&etm2>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-3 */
+		cti15: cti@85b000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x0085b000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+			arm,cs-dev-assoc = <&etm3>;
+
+			status = "disabled";
+		};
+
+		etm0: etm@85c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085c000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU0>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@85d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085d000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU1>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel1_in1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@85e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085e000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU2>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel1_in2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@85f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085f000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU3>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel1_in3>;
+					};
+				};
+			};
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8916-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 122>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp_i2c1_default: blsp-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c1_sleep: blsp-i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_default: blsp-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_sleep: blsp-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_default: blsp-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_sleep: blsp-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_default: blsp-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_sleep: blsp-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_default: blsp-i2c5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_sleep: blsp-i2c5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_default: blsp-i2c6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_sleep: blsp-i2c6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_spi1_default: blsp-spi1-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi1_sleep: blsp-spi1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi2_default: blsp-spi2-default-state {
+				spi-pins {
+					pins = "gpio4", "gpio5", "gpio7";
+					function = "blsp_spi2";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio6";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi2_sleep: blsp-spi2-sleep-state {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi3_default: blsp-spi3-default-state {
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi3_sleep: blsp-spi3-sleep-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi4_default: blsp-spi4-default-state {
+				spi-pins {
+					pins = "gpio12", "gpio13", "gpio15";
+					function = "blsp_spi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio14";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi4_sleep: blsp-spi4-sleep-state {
+				pins = "gpio12", "gpio13", "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi5_default: blsp-spi5-default-state {
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "blsp_spi5";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio18";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi5_sleep: blsp-spi5-sleep-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi6_default: blsp-spi6-default-state {
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi6_sleep: blsp-spi6-sleep-state {
+				pins = "gpio20", "gpio21", "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart1_default: blsp-uart1-default-state {
+				/* TX, RX, CTS_N, RTS_N */
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart1_sleep: blsp-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart2_default: blsp-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart2_sleep: blsp-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			camera_front_default: camera-front-default-state {
+				pwdn-pins {
+					pins = "gpio33";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				rst-pins {
+					pins = "gpio28";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				mclk1-pins {
+					pins = "gpio27";
+					function = "cam_mclk1";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			camera_rear_default: camera-rear-default-state {
+				pwdn-pins {
+					pins = "gpio34";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				rst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				mclk0-pins {
+					pins = "gpio26";
+					function = "cam_mclk0";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cdc_dmic_default: cdc-dmic-default-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <8>;
+				};
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <8>;
+				};
+			};
+
+			cdc_dmic_sleep: cdc-dmic-sleep-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cdc_pdm_default: cdc-pdm-default-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			cdc_pdm_sleep: cdc-pdm-sleep-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			pri_mi2s_default: mi2s-pri-default-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_sleep: mi2s-pri-sleep-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_default: mi2s-pri-ws-default-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sec_mi2s_default: mi2s-sec-default-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			sec_mi2s_sleep: mi2s-sec-sleep-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcss_wlan_default: wcss-wlan-default-state {
+				pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "wcss_wlan";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8916";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "ext_mclk",
+				      "ext_pri_i2s",
+				      "ext_sec_i2s";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8916", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			status = "disabled";
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdss_mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 4>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_mdp_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a98000 {
+				compatible = "qcom,msm8916-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x01a98000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x01a98300 0xd4>,
+				      <0x01a98500 0x280>,
+				      <0x01a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&xo_board>;
+				clock-names = "iface", "ref";
+			};
+		};
+
+		camss: camss@1b0ac00 {
+			compatible = "qcom,msm8916-camss";
+			reg = <0x01b0ac00 0x200>,
+				<0x01b00030 0x4>,
+				<0x01b0b000 0x200>,
+				<0x01b00038 0x4>,
+				<0x01b08000 0x100>,
+				<0x01b08400 0x100>,
+				<0x01b0a000 0x500>,
+				<0x01b00020 0x10>,
+				<0x01b10000 0x1000>;
+			reg-names = "csiphy0",
+				"csiphy0_clk_mux",
+				"csiphy1",
+				"csiphy1_clk_mux",
+				"csid0",
+				"csid1",
+				"ispif",
+				"csi_clk_mux",
+				"vfe0";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csiphy0",
+				"csiphy1",
+				"csid0",
+				"csid1",
+				"ispif",
+				"vfe0";
+			power-domains = <&gcc VFE_GDSC>;
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				<&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+				<&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+				<&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+				<&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+				<&gcc GCC_CAMSS_CSI0_CLK>,
+				<&gcc GCC_CAMSS_CSI0PHY_CLK>,
+				<&gcc GCC_CAMSS_CSI0PIX_CLK>,
+				<&gcc GCC_CAMSS_CSI0RDI_CLK>,
+				<&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+				<&gcc GCC_CAMSS_CSI1_CLK>,
+				<&gcc GCC_CAMSS_CSI1PHY_CLK>,
+				<&gcc GCC_CAMSS_CSI1PIX_CLK>,
+				<&gcc GCC_CAMSS_CSI1RDI_CLK>,
+				<&gcc GCC_CAMSS_AHB_CLK>,
+				<&gcc GCC_CAMSS_VFE0_CLK>,
+				<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+				<&gcc GCC_CAMSS_VFE_AHB_CLK>,
+				<&gcc GCC_CAMSS_VFE_AXI_CLK>;
+			clock-names = "top_ahb",
+				"ispif_ahb",
+				"csiphy0_timer",
+				"csiphy1_timer",
+				"csi0_ahb",
+				"csi0",
+				"csi0_phy",
+				"csi0_pix",
+				"csi0_rdi",
+				"csi1_ahb",
+				"csi1",
+				"csi1_phy",
+				"csi1_pix",
+				"csi1_rdi",
+				"ahb",
+				"vfe0",
+				"csi_vfe0",
+				"vfe_ahb",
+				"vfe_axi";
+			iommus = <&apps_iommu 3>;
+			status = "disabled";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		cci: cci@1b0c000 {
+			compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01b0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				<&gcc GCC_CAMSS_CCI_AHB_CLK>,
+				<&gcc GCC_CAMSS_CCI_CLK>,
+				<&gcc GCC_CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb", "cci_ahb",
+					  "cci", "camss_ahb";
+			assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+					  <&gcc GCC_CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <19200000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&cci0_default>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpu@1c00000 {
+			compatible = "qcom,adreno-306.0", "qcom,adreno";
+			reg = <0x01c00000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface",
+			    "alt_mem_iface",
+			    "gfx3d";
+			clocks =
+			    <&gcc GCC_OXILI_GFX3D_CLK>,
+			    <&gcc GCC_OXILI_AHB_CLK>,
+			    <&gcc GCC_OXILI_GMEM_CLK>,
+			    <&gcc GCC_BIMC_GFX_CLK>,
+			    <&gcc GCC_BIMC_GPU_CLK>,
+			    <&gcc GFX3D_CLK_SRC>;
+			power-domains = <&gcc OXILI_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+				};
+			};
+		};
+
+		venus: video-codec@1d00000 {
+			compatible = "qcom,msm8916-venus";
+			reg = <0x01d00000 0xff000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&gcc VENUS_GDSC>;
+			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+				 <&gcc GCC_VENUS0_AHB_CLK>,
+				 <&gcc GCC_VENUS0_AXI_CLK>;
+			clock-names = "core", "iface", "bus";
+			iommus = <&apps_iommu 5>;
+			memory-region = <&venus_mem>;
+			status = "okay";
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+		};
+
+		apps_iommu: iommu@1ef0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+			reg = <0x01ef0000 0x3000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <17>;
+
+			/* VFE */
+			iommu-ctx@3000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x3000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@4000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@5000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01f08000 0x10000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			/* GFX3D_USER */
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* GFX3D_PRIV */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x400000>,
+			      <0x02c00000 0x400000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,msm8916-mss-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
+
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8916_VDDCX>,
+					<&rpmpd MSM8916_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			qcom,smem-states = <&hexagon_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&scm 0>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&hexagon_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				qcom,ipc = <&apcs 8 12>;
+				qcom,remote-pid = <1>;
+
+				label = "hexagon";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,smd-channels = "fastrpcsmd-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+					};
+				};
+			};
+		};
+
+		sound: sound@7702000 {
+			status = "disabled";
+			compatible = "qcom,apq8016-sbc-sndcard";
+			reg = <0x07702000 0x4>, <0x07702004 0x4>;
+			reg-names = "mic-iomux", "spkr-iomux";
+		};
+
+		lpass: audio-controller@7708000 {
+			status = "disabled";
+			compatible = "qcom,apq8016-lpass-cpu";
+
+			/*
+			 * Note: Unlike the name would suggest, the SEC_I2S_CLK
+			 * is actually only used by Tertiary MI2S while
+			 * Primary/Secondary MI2S both use the PRI_I2S_CLK.
+			 */
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
+
+			clock-names = "ahbix-clk",
+					"mi2s-bit-clk0",
+					"mi2s-bit-clk1",
+					"mi2s-bit-clk2",
+					"mi2s-bit-clk3",
+					"pcnoc-mport-clk",
+					"pcnoc-sway-clk";
+			#sound-dai-cells = <1>;
+
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x07708000 0x10000>;
+			reg-names = "lpass-lpaif";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lpass_codec: audio-codec@771c000 {
+			compatible = "qcom,msm8916-wcd-digital-codec";
+			reg = <0x0771c000 0x400>;
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "ahbix-clk", "mclk";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		blsp_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_uart1_default>;
+			pinctrl-1 = <&blsp_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_uart2_default>;
+			pinctrl-1 = <&blsp_uart2_sleep>;
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c1_default>;
+			pinctrl-1 = <&blsp_i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi1_default>;
+			pinctrl-1 = <&blsp_spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c2_default>;
+			pinctrl-1 = <&blsp_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi2: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi2_default>;
+			pinctrl-1 = <&blsp_spi2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c3_default>;
+			pinctrl-1 = <&blsp_i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi3_default>;
+			pinctrl-1 = <&blsp_spi3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c4_default>;
+			pinctrl-1 = <&blsp_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi4_default>;
+			pinctrl-1 = <&blsp_spi4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c5_default>;
+			pinctrl-1 = <&blsp_i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi5_default>;
+			pinctrl-1 = <&blsp_spi5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c6_default>;
+			pinctrl-1 = <&blsp_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi6: spi@78ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi6_default>;
+			pinctrl-1 = <&blsp_spi6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78d9000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078d9000 0x200>,
+			      <0x078d9200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8916",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44>,
+								 <0x1 0x6b>,
+								 <0x2 0x24>,
+								 <0x3 0x13>;
+				};
+			};
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8916_VDDCX>,
+					<&rpmpd MSM8916_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcss_wlan_default>;
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
+			      <0x0b001000 0x1000>, <0x0b004000 0x2000>;
+			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+			clock-names = "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		a53pll: clock@b016000 {
+			compatible = "qcom,msm8916-a53pll";
+			reg = <0x0b016000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+		};
+
+		timer@b020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b021000 0x1000>,
+				      <0x0b022000 0x1000>;
+			};
+
+			frame@b023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		cpu0_acc: power-manager@b088000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b088000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu0_saw: power-manager@b089000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b089000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu1_acc: power-manager@b098000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b098000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu1_saw: power-manager@b099000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b099000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu2_acc: power-manager@b0a8000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b0a8000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu2_saw: power-manager@b0a9000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0a9000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu3_acc: power-manager@b0b8000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b0b8000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu3_saw: power-manager@b0b9000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0b9000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+	};
+
+	thermal-zones {
+		cpu0-1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu0_1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu2_3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cam_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
new file mode 100644
index 0000000000..adb96cd8d6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * msm8939-pm8916.dtsi describes common properties (e.g. regulator connections)
+ * that apply to most devices that make use of the MSM8939 SoC and PM8916 PMIC.
+ * Many regulators have a fixed purpose in the original reference design and
+ * were rarely re-used for different purposes. Devices that deviate from the
+ * typical reference design should not make use of this include and instead add
+ * the necessary properties in the board-specific device tree.
+ */
+
+#include "msm8939.dtsi"
+#include "pm8916.dtsi"
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8916_l2>;
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi0_phy {
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&pm8916_l2>;
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi1_phy {
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mpss {
+	pll-supply = <&pm8916_l7>;
+};
+
+&pm8916_codec {
+	vdd-cdc-io-supply = <&pm8916_l5>;
+	vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+	vdd-micbias-supply = <&pm8916_l13>;
+};
+
+&rpm_requests {
+	pm8916_rpm_regulators: regulators {
+		compatible = "qcom,rpm-pm8916-regulators";
+		vdd_l1_l2_l3-supply = <&pm8916_s3>;
+		vdd_l4_l5_l6-supply = <&pm8916_s4>;
+		vdd_l7-supply = <&pm8916_s4>;
+
+		/* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */
+		/* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */
+		pm8916_s3: s3 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on; /* Needed for L2 */
+		};
+		pm8916_s4: s4 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-always-on; /* Needed for L5/L7 */
+		};
+
+		/*
+		 * Some of the regulators are unused or managed by another
+		 * processor (e.g. the modem). We should still define nodes for
+		 * them to ensure the vote from the application processor can be
+		 * dropped in case the regulators are already on during boot.
+		 *
+		 * The labels for these nodes are omitted on purpose because
+		 * boards should configure a proper voltage before using them.
+		 */
+		l1 {};
+
+		pm8916_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on; /* Needed for LPDDR RAM */
+		};
+
+		/* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */
+
+		l4 {};
+
+		pm8916_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for most digital I/O */
+		};
+
+		pm8916_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8916_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for CPU PLL */
+		};
+
+		pm8916_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8916_l9: l9 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		l10 {};
+
+		pm8916_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8916_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8916_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		l14 {};
+		l15 {};
+		l16 {};
+		l17 {};
+		l18 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8916_l8>;
+	vqmmc-supply = <&pm8916_l5>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8916_l11>;
+	vqmmc-supply = <&pm8916_l12>;
+};
+
+&usb_hs_phy {
+	v1p8-supply = <&pm8916_l7>;
+	v3p3-supply = <&pm8916_l13>;
+};
+
+&wcnss {
+	vddpx-supply = <&pm8916_l7>;
+};
+
+&wcnss_iris {
+	vddxo-supply = <&pm8916_l7>;
+	vddrfa-supply = <&pm8916_s3>;
+	vddpa-supply = <&pm8916_l9>;
+	vdddig-supply = <&pm8916_l5>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
new file mode 100644
index 0000000000..ba652909d1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A7 (2015)";
+	compatible = "samsung,a7", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	i2c-fg {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&fg_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		battery@35 {
+			compatible = "richtek,rt5033-battery";
+			reg = <0x35>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
+
+			pinctrl-0 = <&fg_alert_default>;
+			pinctrl-names = "default";
+		};
+	};
+
+	i2c-nfc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&nfc_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nfc@2b {
+			compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+			reg = <0x2b>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-0 = <&nfc_default>;
+			pinctrl-names = "default";
+		};
+	};
+
+	i2c-sensor {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 84 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 85 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&sensor_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		accelerometer: accelerometer@10 {
+			compatible = "bosch,bmc150_accel";
+			reg = <0x10>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&pm8916_l17>;
+			vddio-supply = <&pm8916_l5>;
+
+			pinctrl-0 = <&accel_int_default>;
+			pinctrl-names = "default";
+
+			mount-matrix = "-1", "0", "0",
+					"0", "-1", "0",
+					"0", "0", "1";
+		};
+
+		magnetometer@12 {
+			compatible = "bosch,bmc150_magn";
+			reg = <0x12>;
+
+			vdd-supply = <&pm8916_l17>;
+			vddio-supply = <&pm8916_l5>;
+		};
+	};
+
+	i2c-tkey {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&tkey_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			/* Note: Actually an ABOV MCU that implements same interface */
+			compatible = "coreriver,tc360-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&reg_touch_key>;
+			vdd-supply = <&reg_keyled>;
+			vddio-supply = <&pm8916_l6>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+			pinctrl-0 = <&tkey_default>;
+			pinctrl-names = "default";
+		};
+	};
+
+	pwm_vibrator: pwm-vibrator {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-0 = <&motor_pwm_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_keyled: regulator-keyled {
+		compatible = "regulator-fixed";
+		regulator-name = "keyled";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* NOTE: On some variants e.g. SM-A700FD it's GPIO 91 */
+		gpio = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tkey_led_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tkey_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_vdd: regulator-tsp-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_vdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pm8916_s4>;
+
+		gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_tsp_io_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_vdd_tsp: regulator-vdd-tsp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_vibrator: regulator-vibrator {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_en";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&pwm_vibrator 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&reg_vibrator>;
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	muic: extcon@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&muic_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+
+		reg = <0x24>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&reg_vdd_tsp>;
+		vddio-supply = <&reg_tsp_vdd>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fg_alert_default: fg-alert-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fg_i2c_default: fg-i2c-default-state {
+		pins = "gpio105", "gpio106";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	motor_en_default: motor-en-default-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default: motor-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		irq-pins {
+			pins = "gpio21";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		nfc-pins {
+			pins = "gpio49", "gpio116";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	nfc_i2c_default: nfc-i2c-default-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	reg_tsp_en_default: reg-tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	reg_tsp_io_en_default: reg-tsp-io-en-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sensor_i2c_default: sensor-i2c-default-state {
+		pins = "gpio84", "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_default: tkey-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio56";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_i2c_default: tkey-i2c-default-state {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_led_en_default: tkey-led-en-default-state {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
new file mode 100644
index 0000000000..89b6aebba4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023, Bryan O'Donoghue.
+ *
+ */
+
+/dts-v1/;
+
+#include "msm8939.dtsi"
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia M4 Aqua";
+	compatible = "sony,kanuti-tulip", "qcom,msm8939";
+	chassis-type = "handset";
+
+	qcom,board-id = <QCOM_BOARD_ID_MTP 0>;
+	qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>;
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&tlmm {
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
new file mode 100644
index 0000000000..3fd64cafe9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -0,0 +1,2437 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,gcc-msm8939.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8939.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	/*
+	 * Stock LK wants address-cells/size-cells = 2
+	 * A number of our drivers want address/size cells = 1
+	 * hence the disparity between top-level and /soc below.
+	 */
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x100>;
+			next-level-cache = <&L2_1>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs1_mbox>;
+			#cooling-cells = <2>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x101>;
+			next-level-cache = <&L2_1>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs1_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x102>;
+			next-level-cache = <&L2_1>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs1_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x103>;
+			next-level-cache = <&L2_1>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs1_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x0>;
+			qcom,acc = <&acc4>;
+			qcom,saw = <&saw4>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs0_mbox>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			qcom,acc = <&acc5>;
+			qcom,saw = <&saw5>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs0_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU6: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			qcom,acc = <&acc6>;
+			qcom,saw = <&saw6>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs0_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU7: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			qcom,acc = <&acc7>;
+			qcom,saw = <&saw7>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs0_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		idle-states {
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <130>;
+				exit-latency-us = <150>;
+				min-residency-us = <2000>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	/*
+	 * MSM8939 has a big.LITTLE heterogeneous computing architecture,
+	 * consisting of two clusters of four ARM Cortex-A53s each. The
+	 * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs
+	 * at 1.5-1.7GHz.
+	 *
+	 * The enable method used here is spin-table which presupposes use
+	 * of a 2nd stage boot shim such as lk2nd to have installed a
+	 * spin-table, the downstream non-psci/non-spin-table method that
+	 * default msm8916/msm8936/msm8939 will not be supported upstream.
+	 */
+	cpu-map {
+		/* LITTLE (efficiency) cluster */
+		cluster0 {
+			core0 {
+				cpu = <&CPU4>;
+			};
+
+			core1 {
+				cpu = <&CPU5>;
+			};
+
+			core2 {
+				cpu = <&CPU6>;
+			};
+
+			core3 {
+				cpu = <&CPU7>;
+			};
+		};
+
+		/* big (performance) cluster */
+		/* Boot CPU is cluster 1 core 0 */
+		cluster1 {
+			core0 {
+				cpu = <&CPU0>;
+			};
+
+			core1 {
+				cpu = <&CPU1>;
+			};
+
+			core2 {
+				cpu = <&CPU2>;
+			};
+
+			core3 {
+				cpu = <&CPU3>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8936-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs1_mbox 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8936";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clock-names = "xo";
+					clocks = <&xo_board>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8939-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz-apps@86000000 {
+			reg = <0x0 0x86000000 0x0 0x300000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		hypervisor@86400000 {
+			reg = <0x0 0x86400000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz@86500000 {
+			reg = <0x0 0x86500000 0x0 0x180000>;
+			no-map;
+		};
+
+		reserved@86680000 {
+			reg = <0x0 0x86680000 0x0 0x80000>;
+			no-map;
+		};
+
+		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86700000 0x0 0xe0000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		rfsa@867e0000 {
+			reg = <0x0 0x867e0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86800000 {
+			reg = <0x0 0x86800000 0x0 0x5500000>;
+			no-map;
+		};
+
+		wcnss_mem: wcnss@8bd00000 {
+			reg = <0x0 0x8bd00000 0x0 0x600000>;
+			no-map;
+		};
+
+		venus_mem: venus@8c300000 {
+			reg = <0x0 0x8c300000 0x0 0x800000>;
+			no-map;
+		};
+
+		mba_mem: mba@8cb00000 {
+			reg = <0x0 0x8cb00000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1_mbox 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		hexagon_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1_mbox 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs1_mbox 8 13>;
+		qcom,ipc-3 = <&apcs1_mbox 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		qfprom: qfprom@5c000 {
+			compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
+			reg = <0x0005c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@a0 {
+				reg = <0xa0 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s6_p1: s6-p1@a1 {
+				reg = <0xa1 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s6_p2: s6-p2@a1 {
+				reg = <0xa1 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s7_p1: s7-p1@a2 {
+				reg = <0xa2 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p2: s7-p2@a3 {
+				reg = <0xa3 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s8_p1: s8-p1@a4 {
+				reg = <0xa4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s8_p2: s8-p2@a4 {
+				reg = <0xa4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s9_p1: s9-p1@a5 {
+				reg = <0xa5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s9_p2: s9-p2@a6 {
+				reg = <0xa6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@a7 {
+				reg = <0xa7 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_mode: mode@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_s0_p1: s0-p1@d0 {
+				reg = <0xd0 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s0_p2: s0-p1@d1 {
+				reg = <0xd1 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@d1 {
+				reg = <0xd1 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@d2 {
+				reg = <0xd2 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@d3 {
+				reg = <0xd3 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@d4 {
+				reg = <0xd4 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@d5 {
+				reg = <0xd5 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s5_p1: s5-p1@d6 {
+				reg = <0xd6 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s5_p2: s5-p2@d7 {
+				reg = <0xd7 0x1>;
+				bits = <1 6>;
+			};
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8939-bimc";
+			reg = <0x00400000 0x62000>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+			#interconnect-cells = <1>;
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2";
+			#qcom,sensors = <9>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8939-pcnoc";
+			reg = <0x00500000 0x11000>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+			#interconnect-cells = <1>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8939-snoc";
+			reg = <0x00580000 0x14080>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+			#interconnect-cells = <1>;
+
+			snoc_mm: interconnect-snoc {
+				compatible = "qcom,msm8939-snoc-mm";
+				clock-names = "bus", "bus_a";
+				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
+					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
+				#interconnect-cells = <1>;
+			};
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8916-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 122>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp_i2c1_default: blsp-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c1_sleep: blsp-i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_default: blsp-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_sleep: blsp-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_default: blsp-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_sleep: blsp-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_default: blsp-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_sleep: blsp-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_default: blsp-i2c5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_sleep: blsp-i2c5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_default: blsp-i2c6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_sleep: blsp-i2c6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_spi1_default: blsp-spi1-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi1_sleep: blsp-spi1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi2_default: blsp-spi2-default-state {
+				spi-pins {
+					pins = "gpio4", "gpio5", "gpio7";
+					function = "blsp_spi2";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio6";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi2_sleep: blsp-spi2-sleep-state {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi3_default: blsp-spi3-default-state {
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi3_sleep: blsp-spi3-sleep-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi4_default: blsp-spi4-default-state {
+				spi-pins {
+					pins = "gpio12", "gpio13", "gpio15";
+					function = "blsp_spi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio14";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi4_sleep: blsp-spi4-sleep-state {
+				pins = "gpio12", "gpio13", "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi5_default: blsp-spi5-default-state {
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "blsp_spi5";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio18";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi5_sleep: blsp-spi5-sleep-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi6_default: blsp-spi6-default-state {
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi6_sleep: blsp-spi6-sleep-state {
+				pins = "gpio20", "gpio21", "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart1_default: blsp-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart1_sleep: blsp-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart2_default: blsp-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart2_sleep: blsp-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			camera_front_default: camera-front-default-state {
+				pwdn-pins {
+					pins = "gpio33";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				rst-pins {
+					pins = "gpio28";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				mclk1-pins {
+					pins = "gpio27";
+					function = "cam_mclk1";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			camera_rear_default: camera-rear-default-state {
+				pwdn-pins {
+					pins = "gpio34";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				rst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				mclk0-pins {
+					pins = "gpio26";
+					function = "cam_mclk0";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cdc_dmic_default: cdc-dmic-default-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <8>;
+				};
+
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <8>;
+				};
+			};
+
+			cdc_dmic_sleep: cdc-dmic-sleep-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cdc_pdm_default: cdc-pdm-default-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			cdc_pdm_sleep: cdc-pdm-sleep-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			pri_mi2s_default: mi2s-pri-default-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_sleep: mi2s-pri-sleep-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_default: mi2s-pri-ws-default-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sec_mi2s_default: mi2s-sec-default-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			sec_mi2s_sleep: mi2s-sec-sleep-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcss_wlan_default: wcss-wlan-default-state {
+				pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "wcss_wlan";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8939";
+			reg = <0x01800000 0x80000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "ext_mclk",
+				      "ext_pri_i2s",
+				      "ext_sec_i2s";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8916", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@1a01000 {
+				compatible = "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 4>;
+
+				interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
+						<&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>;
+				interconnect-names = "mdp0-mem", "mdp1-mem";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_mdp_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_mdp_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a98000 {
+				compatible = "qcom,msm8916-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x01a98000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				phys = <&mdss_dsi0_phy>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x01a98300 0xd4>,
+				      <0x01a98500 0x280>,
+				      <0x01a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@1aa0000 {
+				compatible = "qcom,msm8916-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x01aa0000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+						  <&gcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+				phys = <&mdss_dsi1_phy>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdss_mdp_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@1aa0300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x01aa0300 0xd4>,
+				      <0x01aa0500 0x280>,
+				      <0x01aa0780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpu@1c00000 {
+			compatible = "qcom,adreno-405.0", "qcom,adreno";
+			reg = <0x01c00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names = "core",
+				      "iface",
+				      "mem",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "gfx3d",
+				      "rbbmtimer";
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_OXILI_GMEM_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc GFX3D_CLK_SRC>,
+				 <&gcc GCC_OXILI_TIMER_CLK>;
+			power-domains = <&gcc OXILI_GDSC>;
+			operating-points-v2 = <&opp_table>;
+			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+
+			opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+				};
+
+				opp-465000000 {
+					opp-hz = /bits/ 64 <465000000>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+				};
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+				};
+			};
+		};
+
+		apps_iommu: iommu@1ef0000 {
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			reg = <0x01ef0000 0x3000>;
+			ranges = <0 0x01e20000 0x20000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			qcom,iommu-secure-id = <17>;
+
+			/* mdp_0: */
+			iommu-ctx@4000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* venus_ns: */
+			iommu-ctx@5000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x1f08000 0x10000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>,
+				 <&gcc GCC_GFX_TBU_CLK>;
+			clock-names = "iface", "bus", "tbu";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			qcom,iommu-secure-id = <18>;
+
+			/* gfx3d_user: */
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d_priv: */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x400000>,
+			      <0x02c00000 0x400000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,msm8916-mss-pil";
+			reg = <0x04080000 0x100>, <0x04020000 0x040>;
+			reg-names = "qdsp6", "rmb";
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo";
+			power-domains = <&rpmpd MSM8939_VDDMDCX>,
+					<&rpmpd MSM8939_VDDMX>;
+			power-domain-names = "cx", "mx";
+			qcom,smem-states = <&hexagon_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+			resets = <&scm 0>;
+			reset-names = "mss_restart";
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				mboxes = <&apcs1_mbox 12>;
+				qcom,remote-pid = <1>;
+
+				label = "hexagon";
+			};
+		};
+
+		sound: sound@7702000 {
+			compatible = "qcom,apq8016-sbc-sndcard";
+			reg = <0x07702000 0x4>,
+			      <0x07702004 0x4>;
+			reg-names = "mic-iomux", "spkr-iomux";
+			status = "disabled";
+		};
+
+		lpass: audio-controller@7708000 {
+			compatible = "qcom,apq8016-lpass-cpu";
+			reg = <0x07708000 0x10000>;
+			reg-names = "lpass-lpaif";
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif";
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
+			clock-names = "ahbix-clk",
+				      "mi2s-bit-clk0",
+				      "mi2s-bit-clk1",
+				      "mi2s-bit-clk2",
+				      "mi2s-bit-clk3",
+				      "pcnoc-mport-clk",
+				      "pcnoc-sway-clk";
+			#sound-dai-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		lpass_codec: audio-codec@771c000 {
+			compatible = "qcom,msm8916-wcd-digital-codec";
+			reg = <0x0771c000 0x400>;
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "ahbix-clk", "mclk";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		blsp_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_uart1_default>;
+			pinctrl-1 = <&blsp_uart1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_uart2_default>;
+			pinctrl-1 = <&blsp_uart2_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c1_default>;
+			pinctrl-1 = <&blsp_i2c1_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi1_default>;
+			pinctrl-1 = <&blsp_spi1_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c2_default>;
+			pinctrl-1 = <&blsp_i2c2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi2: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi2_default>;
+			pinctrl-1 = <&blsp_spi2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c3_default>;
+			pinctrl-1 = <&blsp_i2c3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi3_default>;
+			pinctrl-1 = <&blsp_spi3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c4_default>;
+			pinctrl-1 = <&blsp_i2c4_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi4_default>;
+			pinctrl-1 = <&blsp_spi4_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c5_default>;
+			pinctrl-1 = <&blsp_i2c5_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi5_default>;
+			pinctrl-1 = <&blsp_spi5_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c6_default>;
+			pinctrl-1 = <&blsp_i2c6_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi6: spi@78ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi6_default>;
+			pinctrl-1 = <&blsp_spi6_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78d9000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078d9000 0x200>,
+			      <0x078d9200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			#reset-cells = <1>;
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			adp-disable;
+			hnp-disable;
+			srp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8916",
+						     "qcom,usb-hs-phy";
+					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					#phy-cells = <0>;
+					qcom,init-seq = /bits/ 8 <0x0 0x44>,
+								 <0x1 0x6b>,
+								 <0x2 0x24>,
+								 <0x3 0x13>;
+				};
+			};
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			power-domains = <&rpmpd MSM8939_VDDCX>,
+					<&rpmpd MSM8939_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcss_wlan_default>;
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+				qcom,ipc = <&apcs1_mbox 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>,
+								   <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
+			      <0x0b001000 0x1000>, <0x0b004000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apcs1_mbox: mailbox@b011000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "pll", "aux", "ref";
+			#clock-cells = <0>;
+			assigned-clocks = <&apcs2>;
+			assigned-clock-rates = <297600000>;
+			#mbox-cells = <1>;
+		};
+
+		a53pll_c1: clock@b016000 {
+			compatible = "qcom,msm8939-a53pll";
+			reg = <0x0b016000 0x40>;
+			#clock-cells = <0>;
+		};
+
+		acc0: clock-controller@b088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b088000 0x1000>;
+		};
+
+		saw0: power-manager@b089000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b089000 0x1000>;
+		};
+
+		acc1: clock-controller@b098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b098000 0x1000>;
+		};
+
+		saw1: power-manager@b099000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b099000 0x1000>;
+		};
+
+		acc2: clock-controller@b0a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0a8000 0x1000>;
+		};
+
+		saw2: power-manager@b0a9000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0a9000 0x1000>;
+		};
+
+		acc3: clock-controller@b0b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0b8000 0x1000>;
+		};
+
+		saw3: power-manager@b0b9000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0b9000 0x1000>;
+		};
+
+		apcs0_mbox: mailbox@b111000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b111000 0x1000>;
+			clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "pll", "aux", "ref";
+			#clock-cells = <0>;
+			#mbox-cells = <1>;
+		};
+
+		a53pll_c0: clock@b116000 {
+			compatible = "qcom,msm8939-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		acc4: clock-controller@b188000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b188000 0x1000>;
+		};
+
+		saw4: power-manager@b189000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b189000 0x1000>;
+		};
+
+		acc5: clock-controller@b198000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b198000 0x1000>;
+		};
+
+		saw5: power-manager@b199000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b199000 0x1000>;
+		};
+
+		acc6: clock-controller@b1a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b1a8000 0x1000>;
+		};
+
+		saw6: power-manager@b1a9000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b1a9000 0x1000>;
+		};
+
+		acc7: clock-controller@b1b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b1b8000 0x1000>;
+		};
+
+		saw7: power-manager@b1b9000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b1b9000 0x1000>;
+		};
+
+		a53pll_cci: clock@b1d0000 {
+			compatible = "qcom,msm8939-a53pll";
+			reg = <0x0b1d0000 0x40>;
+			#clock-cells = <0>;
+		};
+
+		apcs2: mailbox@b1d1000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b1d1000 0x1000>;
+			clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "pll", "aux", "ref";
+			#clock-cells = <0>;
+			#mbox-cells = <1>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu0_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu1_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu2_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu3_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4567-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu4567_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4567_crit: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4567_alert>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				modem1_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				modem2_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cam_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts
new file mode 100644
index 0000000000..711d84dad9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Sireesh Kodali
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Motorola G5 Plus";
+	compatible = "motorola,potter", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x46 0x83a0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (2220 * 1920 * 3)>;
+
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84300000 {
+			reg = <0x0 0x84300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+
+		reserved@aefd2000 {
+			reg = <0x0 0xaefd2000 0x0 0x2e000>;
+			no-map;
+		};
+
+		reserved@eefe4000 {
+			reg = <0x0 0xeefe4000 0x0 0x1c000>;
+			no-map;
+		};
+
+		ramoops@ef000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xef000000 0x0 0x80000>;
+			console-size = <0x40000>;
+			ftrace-size = <0>;
+			record-size = <0x3f800>;
+			pmsg-size = <0x800>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@20 {
+		reg = <0x20>;
+		compatible = "syna,rmi4-i2c";
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_reset>;
+
+		vdd-supply = <&pm8953_l22>;
+		vio-supply = <&pm8953_l6>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <500>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,current-limit-microamp = <25000>;
+	qcom,num-strings = <3>;
+	qcom,external-pfet;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-always-on;
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <1 2>, <96 4>, <111 1>, <126 1>;
+
+	ts_reset: ts-reset-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
new file mode 100644
index 0000000000..a5957e79b8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Alejandro Tafalla
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &adsp_fw_mem;
+/delete-node/ &qseecom_mem;
+/delete-node/ &wcnss_fw_mem;
+
+/ {
+	model = "Xiaomi Mi A2 Lite";
+	compatible = "xiaomi,daisy", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x1000b 0x9>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1920 * 2280 * 3)>;
+
+			width = <1080>;
+			height = <2280>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp@8d600000 {
+			reg = <0x0 0x8d600000 0x0 0x1200000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: wcnss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x700000>;
+			no-map;
+		};
+	};
+
+	/*
+	 * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are
+	 * normally proxied via ADSP firmware. GPIOs aren't protected.
+	 */
+	i2c-sensors {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imu@6a {
+			compatible = "st,lsm6dsl";
+			reg = <0x6a>;
+			vdd-supply = <&pm8953_l10>;
+			vddio-supply = <&pm8953_l6>;
+			mount-matrix = "-1", "0", "0",
+					"0", "-1", "0",
+					"0", "0", "1";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+
+	speaker_codec: audio-codec@3a {
+		compatible = "maxim,max98927";
+		reg = <0x3a>;
+
+		reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+		vmon-slot-no = <1>;
+		imon-slot-no = <1>;
+		maxim,interleave-mode;
+
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8953_l10>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2280>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,current-limit-microamp = <20000>;
+	qcom,num-strings = <2>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
+};
+
+&uart_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart_console_active>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
new file mode 100644
index 0000000000..6b9245cd8b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Xiaomi Redmi Note 4X";
+	compatible = "xiaomi,mido", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <11 0>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1920 * 1080 * 3)>;
+
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+
+		ramoops@9ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9ff00000 0x0 0x00100000>;
+			console-size = <0x100000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+
+		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+		};
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+		};
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8953_l10>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+		vdd_l23-supply = <&pm8953_s3>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
new file mode 100644
index 0000000000..9ac4f507e3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Danila Tikhonov <JIaxyga@protonmail.com>
+ * Copyright (c) 2022, Anton Bambura <jenneron@protonmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &adsp_fw_mem;
+/delete-node/ &qseecom_mem;
+/delete-node/ &wcnss_fw_mem;
+
+/ {
+	model = "Xiaomi Mi A1";
+	compatible = "xiaomi,tissot", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>, <&gpio_hall_sensor_default>;
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp@8d600000 {
+			reg = <0x0 0x8d600000 0x0 0x1200000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: wcnss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x700000>;
+			no-map;
+		};
+
+		ramoops@9ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9ff00000 0x0 0x00100000>;
+			record-size = <0x1000>;
+			console-size = <0x80000>;
+			ftrace-size = <0x1000>;
+			pmsg-size = <0x8000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+
+	max98927_codec: audio-codec@3a {
+		compatible = "maxim,max98927";
+		reg = <0x3a>;
+
+		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+
+		vmon-slot-no = <1>;
+		imon-slot-no = <1>;
+
+		#sound-dai-cells = <0>;
+	};
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+
+		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8953_l10>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,num-strings = <2>;
+	qcom,external-pfet;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <1156000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10:l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
+
+	gpio_hall_sensor_default: gpio-hall-sensor-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart_console_active>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
new file mode 100644
index 0000000000..b0588f30f8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Eugene Lepshy <fekz115@gmail.com>
+ * Copyright (c) 2022, Gianluca Boiano <morf3089@gmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &adsp_fw_mem;
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+/delete-node/ &wcnss_fw_mem;
+
+/ {
+	model = "Xiaomi Redmi 5 Plus";
+	compatible = "xiaomi,vince", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x1000b 0x08>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 2160 * 3)>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp@8d600000 {
+			reg = <0x0 0x8d600000 0x0 0x1200000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: wcnss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x700000>;
+			no-map;
+		};
+
+		ramoops@9ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9ff00000 0x0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x80000>;
+			ftrace-size = <0x1000>;
+			pmsg-size = <0x8000>;
+		};
+	};
+
+	/*
+	 * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are
+	 * normally proxied via ADSP firmware. GPIOs aren't protected.
+	 */
+	i2c-sensors {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imu@6a {
+			compatible = "st,lsm6dsl";
+			reg = <0x6a>;
+			vdd-supply = <&pm8953_l10>;
+			vddio-supply = <&pm8953_l6>;
+			mount-matrix = "1", "0", "0",
+					"0", "-1", "0",
+					"0", "0", "1";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+
+		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@20 {
+		reg = <0x20>;
+		compatible = "syna,rmi4-i2c";
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l6>;
+
+		pinctrl-names = "init", "suspend";
+		pinctrl-0 = <&ts_reset_active &ts_int_active>;
+		pinctrl-1 = <&ts_reset_suspend &ts_int_suspend>;
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <500>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,rezero-wait-ms = <20>;
+			syna,sensor-type = <1>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <122>;
+		};
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,current-limit-microamp = <20000>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,num-strings = <2>;
+	qcom,external-pfet;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <1156000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1380000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_suspend: ts-reset-suspend-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_int_suspend: ts-int-suspend-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart_console_active>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
new file mode 100644
index 0000000000..e7de763266
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -0,0 +1,1922 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/clock/qcom,gcc-msm8953.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		L2_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		L2_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8953", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8953-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8953";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8953-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		zap_shader_region: zap@81800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x81800000 0x0 0x2000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem_mem: smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86c00000 {
+			reg = <0x0 0x86c00000 0x0 0x6a00000>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp@8d600000 {
+			reg = <0x0 0x8d600000 0x0 0x1100000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: wcnss@8e700000 {
+			reg = <0x0 0x8e700000 0x0 0x700000>;
+			no-map;
+		};
+
+		dfps_data_mem: dfps-data@90000000 {
+			reg = <0 0x90000000 0 0x1000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 0x13ff000>;
+			no-map;
+		};
+
+		venus_mem: venus@91400000 {
+			reg = <0x0 0x91400000 0x0 0x700000>;
+			no-map;
+		};
+
+		mba_mem: mba@92000000 {
+			reg = <0x0 0x92000000 0x0 0x100000>;
+			no-map;
+		};
+
+		rmtfs@f2d00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf2d00000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		smp2p_wcnss_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_wcnss_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		hsusb_phy: phy@79000 {
+			compatible = "qcom,msm8953-qusb2-phy";
+			reg = <0x00079000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_QUSB_REF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>;
+
+			resets = <&gcc GCC_QUSB2_PHY_BCR>;
+
+			status = "disabled";
+		};
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tsens0: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8953-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 142>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart_console_active: uart-console-active-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			uart_console_sleep: uart-console-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_clk_on: sdc1-clk-on-state {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc1_clk_off: sdc1-clk-off-state {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: sdc1-cmd-on-state {
+				pins = "sdc1_cmd";
+				bias-disable;
+				drive-strength = <10>;
+			};
+
+			sdc1_cmd_off: sdc1-cmd-off-state {
+				pins = "sdc1_cmd";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: sdc1-data-on-state {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc1_data_off: sdc1-data-off-state {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: sdc1-rclk-on-state {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: sdc1-rclk-off-state {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc2_clk_on: sdc2-clk-on-state {
+				pins = "sdc2_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			sdc2_clk_off: sdc2-clk-off-state {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc2_cmd_on: sdc2-cmd-on-state {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_cmd_off: sdc2-cmd-off-state {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc2_data_on: sdc2-data-on-state {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_data_off: sdc2-data-off-state {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc2_cd_on: cd-on-state {
+				pins = "gpio133";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			sdc2_cd_off: cd-off-state {
+				pins = "gpio133";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			gpio_key_default: gpio-key-default-state {
+				pins = "gpio85";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c_1_default: i2c-1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_1_sleep: i2c-1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_2_default: i2c-2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_2_sleep: i2c-2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_3_default: i2c-3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_3_sleep: i2c-3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_4_default: i2c-4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_4_sleep: i2c-4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_5_default: i2c-5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_5_sleep: i2c-5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_6_default: i2c-6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_6_sleep: i2c-6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_7_default: i2c-7-default-state {
+				pins = "gpio135", "gpio136";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_7_sleep: i2c-7-sleep-state {
+				pins = "gpio135", "gpio136";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_8_default: i2c-8-default-state {
+				pins = "gpio98", "gpio99";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_8_sleep: i2c-8-sleep-state {
+				pins = "gpio98", "gpio99";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			wcnss_pin_a: wcnss-active-state {
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8953";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>;
+			clock-names = "xo",
+				      "sleep",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8953", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		tcsr_phy_clk_scheme_sel: syscon@193f044 {
+			compatible = "qcom,tcsr-msm8953", "syscon";
+			reg = <0x0193f044 0x4>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
+			reg-names = "mdss_phys",
+				    "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8953-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				power-domains = <&gcc MDSS_GDSC>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94400 {
+				compatible = "qcom,dsi-phy-14nm-8953";
+				reg = <0x01a94400 0x100>,
+				      <0x01a94500 0x300>,
+				      <0x01a94800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+						  <&gcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@1a96400 {
+				compatible = "qcom,dsi-phy-14nm-8953";
+				reg = <0x01a96400 0x100>,
+				      <0x01a96500 0x300>,
+				      <0x01a96800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		apps_iommu: iommu@1e20000 {
+			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
+			ranges  = <0 0x01e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x1000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x2100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			interrupt-controller;
+
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,msm8953-mss-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>,
+					<&rpmpd MSM8953_VDDMX>,
+					<&rpmpd MSM8953_VDDMD>;
+			power-domain-names = "cx", "mx","mss";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&gcc GCC_MSS_BCR>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				qcom,ipc = <&apcs 8 12>;
+				qcom,remote-pid = <1>;
+
+				label = "modem";
+			};
+		};
+
+		usb3: usb@70f8800 {
+			compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
+			reg = <0x070f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_PCNOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133330000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			status = "disabled";
+
+			usb3_dwc3: usb@7000000 {
+				compatible = "snps,dwc3";
+				reg = <0x07000000 0xcc00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy>;
+				phy-names = "usb2-phy";
+
+				snps,usb2-gadget-lpm-disable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x00>;
+
+				maximum-speed = "high-speed";
+			};
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
+
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+			mmc-hs400-1_8v;
+			mmc-hs200-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table-sdhc1 {
+				compatible = "operating-points-v2";
+
+				opp-25000000 {
+					opp-hz = /bits/ 64 <25000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
+
+			reg = <0x07864900 0x500>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table-sdhc2 {
+				compatible = "operating-points-v2";
+
+				opp-25000000 {
+					opp-hz = /bits/ 64 <25000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-177770000 {
+					opp-hz = /bits/ 64 <177770000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			num-channels = <12>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			qcom,controlled-remotely;
+		};
+
+		uart_0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+
+			status = "disabled";
+		};
+
+		i2c_1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_1_default>;
+			pinctrl-1 = <&i2c_1_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_2_default>;
+			pinctrl-1 = <&i2c_2_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_3_default>;
+			pinctrl-1 = <&i2c_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_4_default>;
+			pinctrl-1 = <&i2c_4_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			num-channels = <12>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			qcom,controlled-remotely;
+		};
+
+		i2c_5: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_5_default>;
+			pinctrl-1 = <&i2c_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_6: i2c@7af6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_6_default>;
+			pinctrl-1 = <&i2c_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_7: i2c@7af7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af7000 0x600>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_7_default>;
+			pinctrl-1 = <&i2c_7_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_8: i2c@7af8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af8000 0x600>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_8_default>;
+			pinctrl-1 = <&i2c_8_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_fw_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>,
+					<&rpmpd MSM8953_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&smp2p_wcnss_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcnss_pin_a>;
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8953-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b121000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		lpass: remoteproc@c200000 {
+			compatible = "qcom,msm8953-adsp-pil";
+			reg = <0x0c200000 0x100>;
+
+			interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>;
+			power-domain-names = "cx";
+
+			memory-region = <&adsp_fw_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+				label = "lpass";
+				mboxes = <&apcs 8>;
+				qcom,smd-edge = <1>;
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6core: service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+
+							dai@16 {
+								reg = <PRIMARY_MI2S_RX>;
+								qcom,sd-lines = <0 1>;
+							};
+							dai@20 {
+								reg = <TERTIARY_MI2S_TX>;
+								qcom,sd-lines = <0 1>;
+							};
+							dai@127 {
+								reg = <QUINARY_MI2S_RX>;
+								qcom,sd-lines = <0>;
+							};
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+
+							dai@0 {
+								reg = <0>;
+								direction = <Q6ASM_DAI_RX>;
+							};
+							dai@1 {
+								reg = <1>;
+								direction = <Q6ASM_DAI_TX>;
+							};
+							dai@2 {
+								reg = <2>;
+								direction = <Q6ASM_DAI_RX>;
+							};
+							dai@3 {
+								reg = <3>;
+								direction = <Q6ASM_DAI_RX>;
+								is-compress-dai;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 9>;
+			trips {
+				cpu0_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 10>;
+			trips {
+				cpu1_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 11>;
+			trips {
+				cpu2_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 12>;
+			trips {
+				cpu3_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 4>;
+			trips {
+				cpu4_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu4_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 5>;
+			trips {
+				cpu5_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu5_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 6>;
+			trips {
+				cpu6_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu6_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 7>;
+			trips {
+				cpu7_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu7_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
new file mode 100644
index 0000000000..3fb8e23e43
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X Compact";
+	compatible = "sony,kugo-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+
+	/* FUSB301 USB-C Controller */
+};
+
+&blsp2_i2c4 {
+	status = "okay";
+
+	/* ST STMVL53L0 ToF @ 29 */
+	/* AMS TCS349 RGBCIR @ 72 */
+};
+
+&pm8950_l1 {
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1300000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
new file mode 100644
index 0000000000..87d657f680
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X";
+	compatible = "sony,suzu-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
new file mode 100644
index 0000000000..085d79542e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8956.dtsi"
+
+#include "pm8004.dtsi"
+#include "pm8950.dtsi"
+#include "pmi8950.dtsi"
+
+/ {
+	qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */
+	qcom,board-id = <8 0>;
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		mmc2 = &sdhc_3; /* SDC3 SDIO card slot */
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		cont-splash@83000000 {
+			reg = <0x0 0x83000000 0x0 0x2800000>;
+		};
+
+		ramoops@57f00000 {
+			compatible = "ramoops";
+			reg = <0 0x57f00000 0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	usbphy_1p2: regulator-usbphy-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usbphy-1p2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vph_pwr>;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* Synaptics RMI4 @ 2c */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&otg {
+	status = "okay";
+};
+
+&pm8004_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 1 supply */
+	pm8004_s2: s2 {
+		/* regulator-min-microvolt = <500000>; */
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc1";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pm8004_s5: s5 {
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-enable-ramp-delay = <500>;
+		regulator-name = "vdd_gfx";
+		/* Hack this on until the gpu driver is ready for it */
+		regulator-always-on;
+	};
+};
+
+&pm8950_spmi_regulators {
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 0 supply */
+	pm8950_spmi_s5: s5 {
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		/* regulator-min-microvolt = <790000>; */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc0";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rpm_requests {
+	pm8950_regulators: regulators {
+		compatible = "qcom,rpm-pm8950-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_l1_l19-supply = <&pm8950_s3>;
+		vdd_l2_l23-supply = <&pm8950_s3>;
+		vdd_l3-supply = <&pm8950_s3>;
+		vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+		pm8950_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1162500>;
+		};
+
+		pm8950_s3: s3 {
+			regulator-min-microvolt = <1325000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-always-on;
+		};
+
+		pm8950_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8950_l1: l1 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8950_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <290000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-system-load = <130000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l9: l9 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2400000>;
+		};
+
+		pm8950_l10: l10 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <60000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8950_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l17: l17 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8950_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	/* Toshiba THGBMHG8C4LBAU7 (032G34) */
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&pm8950_l8>;
+	vqmmc-supply = <&pm8950_l5>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	bus-width = <4>;
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8950_l11>;
+	vqmmc-supply = <&pm8950_l12>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+};
+
+&usb_hs_phy {
+	vdd-supply = <&usbphy_1p2>;
+	vdda1p8-supply = <&pm8950_l7>;
+	vdda3p3-supply = <&pm8950_l13>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956.dtsi b/arch/arm64/boot/dts/qcom/msm8956.dtsi
new file mode 100644
index 0000000000..668e05185c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@collabora.com>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8976.dtsi"
+
+&pmu {
+	interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+};
+
+&tsens {
+	compatible = "qcom,msm8956-tsens", "qcom,tsens-v1";
+};
+
+/*
+ * You might be wondering.. why is it so empty out there?
+ * Well, the SoCs are almost identical.
+ */
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
new file mode 100644
index 0000000000..4c5be22b47
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -0,0 +1,1354 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@collabora.com>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-msm8976.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <181>;
+				exit-latency-us = <149>;
+				min-residency-us = <703>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-retention";
+				arm,psci-suspend-param = <0x00000002>;
+				entry-latency-us = <142>;
+				exit-latency-us = <99>;
+				min-residency-us = <242>;
+			};
+
+			big_cpu_sleep_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <158>;
+				exit-latency-us = <144>;
+				min-residency-us = <863>;
+				local-timer-stop;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8976", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8976-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8976";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8976-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+
+						rpmpd_opp_turbo_high: opp111 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ext-region@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x500000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86c00000 {
+			reg = <0x0 0x86c00000 0x0 0x5600000>;
+			no-map;
+		};
+
+		lpass_mem: lpass@8c200000 {
+			reg = <0x0 0x8c200000 0x0 0x1800000>;
+			no-map;
+		};
+
+		venus_mem: memory@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x2600000>;
+			no-map;
+		};
+
+		tz-apps@8dd00000 {
+			reg = <0x0 0x8dd00000 0x0 0x1400000>;
+			no-map;
+		};
+	};
+
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+		qcom,smem = <443>, <429>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+		qcom,smem = <435>, <428>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+		qcom,smem = <451>, <431>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-2 = <&apcs 8 9>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x140>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0006c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc RST_QUSB2_PHY_BCR>,
+				 <&gcc RST_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8976-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@218 {
+				reg = <0x218 1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1: s0-p1@219 {
+				reg = <0x219 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s0_p2: s0-p2@219 {
+				reg = <0x219 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s1_p1: s1-p1@21a {
+				reg = <0x21a 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@21b {
+				reg = <0x21b 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p1: s2-p1@21c {
+				reg = <0x21c 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2: s2-p2@21c {
+				reg = <0x21c 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p1: s3-p1@21d {
+				reg = <0x21d 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p2: s3-p2@21e {
+				reg = <0x21e 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@220 {
+				reg = <0x220 1>;
+				bits = <0 8>;
+			};
+
+			tsens_s4_p1: s4-p1@221 {
+				reg = <0x221 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s4_p2: s4-p2@221 {
+				reg = <0x221 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s5_p1: s5-p1@222 {
+				reg = <0x222 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@223 {
+				reg = <0x224 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p1: s6-p1@224 {
+				reg = <0x224 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s6_p2: s6-p2@224 {
+				reg = <0x224 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s7_p1: s7-p1@225 {
+				reg = <0x225 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p2: s7-p2@226 {
+				reg = <0x226 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_mode: mode@228 {
+				reg = <0x228 1>;
+				bits = <0 3>;
+			};
+
+			tsens_s8_p1: s8-p1@228 {
+				reg = <0x228 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s8_p2: s8-p2@229 {
+				reg = <0x229 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s9_p1: s9-p1@229 {
+				reg = <0x229 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s9_p2: s9-p2@22a {
+				reg = <0x22a 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s10_p1: s10-p1@22b {
+				reg = <0x22b 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s10_p2: s10-p2@22c {
+				reg = <0x22c 0x1>;
+				bits = <1 6>;
+			};
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8976-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8976-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 145>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			spi1_default: spi0-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "blsp_spi1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			spi1_sleep: spi0-sleep-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart2_active: blsp2-uart2-active-state {
+				pins = "gpio20", "gpio21";
+				function = "blsp_uart6";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+				pins = "gpio20", "gpio21";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			/* 4 (not 6!) interfaces per QUP, BLSP2 indexes are numbered (n)+4 */
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_default: blsp2-i2c4-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8976";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			assigned-clocks = <&gcc GPLL3>;
+			assigned-clock-rates = <1100000000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "xo_a",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,msm8976-tcsr", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x1000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x2100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi1_default>;
+			pinctrl-1 = <&spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		otg: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc RST_USB_HS_BCR>;
+			reset-names = "core";
+			ahb-burst-config = <0>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		sdhc_3: mmc@7a24900 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07a24900 0x11c>, <0x07a24000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart2: serial@7af0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07af0000 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp2_i2c2: i2c@7af6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c4: i2c@7af8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af8000 0x600>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c4_default>;
+			pinctrl-1 = <&blsp2_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8976-apcs-kpss-global",
+				     "qcom,msm8994-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-frequency = <19200000>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>, <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		imem: sram@8600000 {
+			compatible = "qcom,msm8976-imem", "syscon", "simple-mfd";
+			reg = <0x08600000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x08600000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		qdsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+			trips {
+				qdsp_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cam-isp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+			trips {
+				cam_isp_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu4_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu4_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu5_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu5_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu6_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu6_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu7_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu7_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		big-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				l2_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				l2_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				l2_crit: l2-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu0_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				gpu_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
new file mode 100644
index 0000000000..4159fc3557
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+ */
+
+/dts-v1/;
+
+#include "msm8992-lg-bullhead.dtsi"
+
+/ {
+	model = "LG Nexus 5X rev 1.0";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0xa64 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
new file mode 100644
index 0000000000..ad9702dd17
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+ */
+
+/dts-v1/;
+
+#include "msm8992-lg-bullhead.dtsi"
+
+/ {
+	model = "LG Nexus 5X rev 1.01";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0xb64 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
new file mode 100644
index 0000000000..b8f2a01bcb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, LGE Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+
+/* cont_splash_mem has different memory mapping */
+/delete-node/ &cont_splash_mem;
+
+/* disabled on downstream, conflicts with cont_splash_mem */
+/delete-node/ &dfps_data_mem;
+
+/ {
+	model = "LG Nexus 5X";
+	compatible = "lg,bullhead", "qcom,msm8992";
+	chassis-type = "handset";
+
+	qcom,msm-id = <251 0>, <252 0>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+
+	/* Bullhead firmware doesn't support PSCI */
+	/delete-node/ psci;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@1ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x1ff00000 0x0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
+
+		cont_splash_mem: memory@3400000 {
+			reg = <0 0x03400000 0 0xc00000>;
+			no-map;
+		};
+
+		reserved@5000000 {
+			reg = <0x0 0x05000000 0x0 0x1a00000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994_regulators: regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vph_pwr>;
+		vdd_l20_21-supply = <&vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		/* S1, S2, S6 and S12 are managed by RPMPD */
+
+		pm8994_s1: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		pm8994_s2: s2 {
+			/* TODO */
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		/* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L5 is inaccessible from RPM */
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* L7 is inaccessible from RPM */
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3100000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	pmi8994_regulators: regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		pmi8994_s1: s1 {};
+
+		/* S2 & S3 - VDD_GFX */
+
+		pmi8994_bby: boost-bypass {};
+	};
+};
+
+&sdhc1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts
new file mode 100644
index 0000000000..8933b53694
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "msm8994-msft-lumia-octagon.dtsi"
+
+/ {
+	model = "Microsoft Lumia 950";
+	compatible = "microsoft,talkman", "qcom,msm8992";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
new file mode 100644
index 0000000000..5fe5de9cee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	model = "Xiaomi Mi 4C";
+	compatible = "xiaomi,libra", "qcom,msm8992";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <251 0>, <252 0>;
+	qcom,pmic-id = <65545 65546 0 0>;
+	qcom,board-id = <12 0>;
+
+	/* This enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0 maxcpus=1";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@3400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x3400000 0 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+			/*
+			 * That's a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet..
+			 */
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_ESC0_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		memory_hole: hole@6400000 {
+			reg = <0 0x06400000 0 0x600000>;
+			no-map;
+		};
+
+		memory_hole2: hole2@6c00000 {
+			reg = <0 0x06c00000 0 0x2400000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@9000000 {
+			reg = <0 0x09000000 0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: tzapp@ea00000 {
+			reg = <0 0x0ea00000 0 0x1900000>;
+			no-map;
+		};
+
+		mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
+			reg = <0 0xca0b0000 0 0x10000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@ca100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xca100000 0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		qseecom_mem: qseecom@cb400000 {
+			reg = <0 0xcb400000 0 0x1c00000>;
+			no-mem;
+		};
+
+		adsp_rfsa_mem: adsp-rfsa@cd000000 {
+			reg = <0 0xcd000000 0 0x10000>;
+			no-map;
+		};
+
+		sensor_rfsa_mem: sensor-rfsa@cd010000 {
+			reg = <0 0xcd010000 0 0x10000>;
+			no-map;
+		};
+
+		ramoops@dfc00000 {
+			compatible = "ramoops";
+			reg = <0 0xdfc00000 0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	/* Atmel or Synaptics touchscreen */
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	/* ST lsm6db0 gyro/accelerometer */
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	/*
+	 * NXP NCI NFC,
+	 * TI USB320 Type-C controller,
+	 * Pericom 30216a USB (de)mux switch
+	 */
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+
+	/* cm36686 proximity and ambient light sensor */
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+
+	/* Silabs si4705 FM transmitter */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&pm8994_spmi_regulators {
+	VDD_APC0: s8 {
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1180000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */
+	VDD_APC1: s11 {
+		regulator-min-microvolt = <700000>;
+		regulator-max-microvolt = <1225000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s7>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vph_pwr>;
+		vdd_l20_21-supply = <&vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		/* S1, S2, S6 and S12 are managed by RPMPD */
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		/* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L5 is inaccessible from RPM */
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* L7 is inaccessible from RPM */
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_lvs1: lvs1 {};
+		pm8994_lvs2: lvs2 {};
+	};
+
+	pmi8994_regulators: regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		pmi8994_s1: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		/* S2 & S3 - VDD_GFX */
+
+		pmi8994_bby: boost-bypass {
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&sdhc1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+	vmmc-supply = <&pm8994_l20>;
+	vqmmc-supply = <&pm8994_s4>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
new file mode 100644
index 0000000000..02fc3795db
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ */
+
+#include "msm8994.dtsi"
+
+/* 8992 only features 2 A57 cores. */
+/delete-node/ &CPU6;
+/delete-node/ &CPU7;
+/delete-node/ &cpu6_map;
+/delete-node/ &cpu7_map;
+
+&gcc {
+	compatible = "qcom,gcc-msm8992";
+};
+
+&mmcc {
+	compatible = "qcom,mmcc-msm8992";
+
+	assigned-clock-rates = <800000000>,
+			       <808000000>,
+			       <1020000000>,
+			       <960000000>,
+			       <800000000>;
+};
+
+&ocmem {
+	reg = <0xfdd00000 0x2000>, <0xfec00000 0x100000>;
+
+	gmu-sram@0 {
+		reg = <0x0 0x80000>;
+	};
+};
+
+&rpmcc {
+	compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc";
+};
+
+&timer {
+	interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
+&tlmm {
+	compatible = "qcom,msm8992-pinctrl";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
new file mode 100644
index 0000000000..29e79ae084
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, Huawei Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+
+/ {
+	model = "Huawei Nexus 6P";
+	compatible = "huawei,angler", "qcom,msm8994";
+	chassis-type = "handset";
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <207 0x20000>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+	qcom,board-id = <8026 0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: memory@3401000 {
+			reg = <0 0x03401000 0 0x1000000>;
+			no-map;
+		};
+
+		tzapp_mem: tzapp@4800000 {
+			reg = <0 0x04800000 0 0x1900000>;
+			no-map;
+		};
+
+		reserved@6300000 {
+			reg = <0 0x06300000 0 0x700000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp1_uart2_default>;
+	pinctrl-1 = <&blsp1_uart2_sleep>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <85 4>;
+};
+
+&sdhc1 {
+	status = "okay";
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts
new file mode 100644
index 0000000000..c593418202
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+#include "msm8994-msft-lumia-octagon.dtsi"
+
+/ {
+	model = "Microsoft Lumia 950 XL";
+	compatible = "microsoft,cityman", "qcom,msm8994";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
new file mode 100644
index 0000000000..2861bcdf87
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for
+ * Microsoft Mobile MSM8994 Octagon Platforms
+ *
+ * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/*
+ * Delete all generic (msm8994.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &cont_splash_mem;
+/delete-node/ &mba_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &smem_mem;
+
+/ {
+	/*
+	 * Most Lumia 950/XL users use GRUB to load their kernels,
+	 * hence there is no need for msm-id and friends.
+	 */
+
+	/*
+	 * This enables graphical output via bootloader-enabled display.
+	 * acpi=no is required due to WP platforms having ACPI support, but
+	 * only for Windows-based OSes.
+	 */
+	chosen {
+		bootargs = "earlycon=efifb console=efifb acpi=no";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	clocks {
+		divclk4: divclk4 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+
+			clock-frequency = <32768>;
+			clock-output-names = "divclk4";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&divclk4_pin_a>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		volup-key {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		camsnap-key {
+			label = "Camera Snapshot";
+			gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		camfocus-key {
+			label = "Camera Focus";
+			gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_front_default &hall_back_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-front-sensor {
+			label = "Hall Effect Front Sensor";
+			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		event-hall-back-sensor {
+			label = "Hall Effect Back Sensor";
+			gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+		};
+	};
+
+	reserved-memory {
+		/*
+		 * This device being a WP platform has a very different
+		 * memory layout than other Android based devices.
+		 * This memory layout is directly copied from the original
+		 * device UEFI firmware, and adapted based on observations
+		 * using JTAG for the Qualcomm Peripheral Image regions.
+		 */
+
+		uefi_mem: memory@200000 {
+			reg = <0 0x00200000 0 0x100000>;
+			no-map;
+		};
+
+		mppark_mem: memory@300000 {
+			reg = <0 0x00300000 0 0x80000>;
+			no-map;
+		};
+
+		fbpt_mem: memory@380000 {
+			reg = <0 0x00380000 0 0x1000>;
+			no-map;
+		};
+
+		dbg2_mem: memory@381000 {
+			reg = <0 0x00381000 0 0x4000>;
+			no-map;
+		};
+
+		capsule_mem: memory@385000 {
+			reg = <0 0x00385000 0 0x1000>;
+			no-map;
+		};
+
+		tpmctrl_mem: memory@386000 {
+			reg = <0 0x00386000 0 0x3000>;
+			no-map;
+		};
+
+		uefiinfo_mem: memory@389000 {
+			reg = <0 0x00389000 0 0x1000>;
+			no-map;
+		};
+
+		reset_mem: memory@389000 {
+			reg = <0 0x00389000 0 0x1000>;
+			no-map;
+		};
+
+		resuncached_mem: memory@38e000 {
+			reg = <0 0x0038e000 0 0x72000>;
+			no-map;
+		};
+
+		disp_mem: memory@400000 {
+			reg = <0 0x00400000 0 0x800000>;
+			no-map;
+		};
+
+		uefistack_mem: memory@c00000 {
+			reg = <0 0x00c00000 0 0x40000>;
+			no-map;
+		};
+
+		cpuvect_mem: memory@c40000 {
+			reg = <0 0x00c40000 0 0x10000>;
+			no-map;
+		};
+
+		rescached_mem: memory@400000 {
+			reg = <0 0x00c50000 0 0xb0000>;
+			no-map;
+		};
+
+		tzapps_mem: memory@6500000 {
+			reg = <0 0x06500000 0 0x500000>;
+			no-map;
+		};
+
+		smem_mem: memory@6a00000 {
+			reg = <0 0x06a00000 0 0x200000>;
+			no-map;
+		};
+
+		hyp_mem: memory@6c00000 {
+			reg = <0 0x06c00000 0 0x100000>;
+			no-map;
+		};
+
+		tz_mem: memory@6d00000 {
+			reg = <0 0x06d00000 0 0x160000>;
+			no-map;
+		};
+
+		rfsa_adsp_mem: memory@6e60000 {
+			reg = <0 0x06e60000 0 0x10000>;
+			no-map;
+		};
+
+		rfsa_mpss_mem: memory@6e70000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0x06e70000 0 0x10000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		/*
+		 * Value obtained from the device original ACPI DSDT table
+		 * MPSS_EFS / SBL
+		 */
+		mba_mem: memory@6e80000 {
+			reg = <0 0x06e80000 0 0x180000>;
+			no-map;
+		};
+
+		/*
+		 * Peripheral Image loader region begin!
+		 * The region reserved for pil is 0x7000000-0xef00000
+		 */
+
+		mpss_mem: memory@7000000 {
+			reg = <0 0x07000000 0 0x5a00000>;
+			no-map;
+		};
+
+		adsp_mem: memory@ca00000 {
+			reg = <0 0x0ca00000 0 0x1800000>;
+			no-map;
+		};
+
+		venus_mem: memory@e200000 {
+			reg = <0 0x0e200000 0 0x500000>;
+			no-map;
+		};
+
+		pil_metadata_mem: memory@e700000 {
+			reg = <0 0x0e700000 0 0x4000>;
+			no-map;
+		};
+
+		memory@e704000 {
+			reg = <0 0x0e704000 0 0x7fc000>;
+			no-map;
+		};
+		/* Peripheral Image loader region end */
+
+		cnss_mem: memory@ef00000 {
+			reg = <0 0x0ef00000 0 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	rmi4-i2c-dev@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,clip-x-low = <0>;
+			syna,clip-x-high = <1440>;
+			syna,clip-y-low = <0>;
+			syna,clip-y-high = <2560>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	/*
+	 * This device uses the Texas Instruments TAS2553, however the TAS2552 driver
+	 * seems to work here. In the future a proper driver might need to
+	 * be written for this device.
+	 */
+	tas2553: tas2553@40 {
+		compatible = "ti,tas2552";
+		reg = <0x40>;
+
+		vbat-supply = <&vph_pwr>;
+		iovdd-supply = <&vreg_s4a_1p8>;
+		avdd-supply = <&vreg_s4a_1p8>;
+
+		enable-gpio = <&pm8994_gpios 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	ak09912: magnetometer@c {
+		compatible = "asahi-kasei,ak09912";
+		reg = <0xc>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&vreg_l18a_2p85>;
+		vid-supply = <&vreg_lvs2a_1p8>;
+	};
+
+	zpa2326: barometer@5c {
+		compatible = "murata,zpa2326";
+		reg = <0x5c>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <74 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&vreg_lvs2a_1p8>;
+	};
+
+	mpu6050: accelerometer@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <64 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&vreg_lvs2a_1p8>;
+		vddio-supply = <&vreg_lvs2a_1p8>;
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	pn547: pn547@28 {
+		compatible = "nxp,pn544-i2c";
+
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+
+	sideinteraction: ad7147_captouch@2c {
+		compatible = "ad,ad7147_captouch";
+		reg = <0x2c>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&grip_default>;
+		pinctrl-1 = <&grip_sleep>;
+
+		interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>;
+
+		button_num = <8>;
+		touchpad_num = <0>;
+		wheel_num = <0>;
+		slider_num = <0>;
+
+		vcc-supply = <&vreg_l18a_2p85>;
+	};
+
+	/*
+	 * The QPDS-T900/QPDS-T930 is a customized part built for Nokia
+	 * by Avago. It is very similar to the Avago APDS-9930 with some
+	 * minor differences. In the future a proper driver might need to
+	 * be written for this device. For now this works fine.
+	 */
+	qpdst900: qpdst900@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+
+	fm_radio: si4705@11 {
+		compatible = "silabs,si470x";
+		reg = <0x11>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_lpddr_1p1: fan53526a@6c {
+		compatible = "fcs,fan53526";
+		reg = <0x6c>;
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vph_pwr>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on; /* Turning off DDR power doesn't sound good. */
+	};
+
+	/* ANX7816 HDMI bridge (needs MDSS HDMI) */
+};
+
+&blsp2_spi4 {
+	status = "okay";
+
+	/*
+	 * This device is a Lattice UC120 USB-C PD PHY.
+	 * It is actually a Lattice iCE40 FPGA pre-programmed by
+	 * the device firmware with a specific bitstream
+	 * enabling USB Type C PHY functionality.
+	 * Communication is done via a proprietary protocol over SPI.
+	 *
+	 * TODO: Once a proper driver is available, replace this.
+	 */
+	uc120: ice5lp2k@0 {
+		compatible = "lattice,ice40-fpga-mgr";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		cdone-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pmi8994_gpios 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+
+	qca6174_bt: bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		clocks = <&divclk4>;
+	};
+};
+
+&pm8994_gpios {
+	bt_en_gpios: bt-en-gpios-state {
+		pinconf {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pinconf {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+			power-source = <PM8994_GPIO_S4>;
+			bias-disable;
+		};
+	};
+};
+
+&pm8994_pon {
+	pwrkey {
+		compatible = "qcom,pm8941-pwrkey";
+		interrupts = <0 8 0 IRQ_TYPE_EDGE_BOTH>;
+		debounce = <15625>;
+		linux,code = <KEY_POWER>;
+	};
+
+	resin {
+		compatible = "qcom,pm8941-resin";
+		interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>;
+		debounce = <15625>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&pmi8994_gpios {
+	pinctrl-0 = <&hd3ss460_pol &hd3ss460_amsel &hd3ss460_en>;
+	pinctrl-names = "default";
+
+	/*
+	 * This device uses a TI HD3SS460 Type-C MUX
+	 * As this device has no driver currently,
+	 * the configuration for USB Face Up is set-up here.
+	 *
+	 * TODO: remove once a driver is available
+	 * TODO: add VBUS GPIO 5
+	 */
+	hd3ss460_pol: pol-low-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		qcom,drive-strength = <3>;
+		bias-pull-down;
+	};
+
+	hd3ss460_amsel: amsel-high-state {
+		pins = "gpio9";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		qcom,drive-strength = <1>;
+		bias-pull-up;
+	};
+
+	hd3ss460_en: en-high-state {
+		pins = "gpio10";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		qcom,drive-strength = <1>;
+		bias-pull-up;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2 {
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&rpm_requests {
+	/* These values were taken from the original firmware ACPI tables */
+	pm8994_regulators: regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&vreg_s1b_1p0>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+		vdd_l25-supply = <&vreg_s5a_2p15>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		/* S1, S2, S6 and S12 are managed by RPMPD */
+
+		vreg_s3a_1p3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-allow-set-load;
+			regulator-system-load = <300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-system-load = <325000>;
+		};
+
+		vreg_s5a_2p15: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-allow-set-load;
+			regulator-system-load = <325000>;
+		};
+
+		vreg_s7a_1p0: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		/*
+		 * S8 - SPMI-managed VDD_APC0
+		 * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1
+		 */
+
+		vreg_l1a_1p0: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l2a_1p25: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-allow-set-load;
+			regulator-system-load = <4160>;
+		};
+
+		vreg_l3a_1p2: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <80000>;
+		};
+
+		vreg_l4a_1p225: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L5 is inaccessible from RPM */
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <1000>;
+		};
+
+		/* L7 is inaccessible from RPM */
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l11a_1p2: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <35000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <50000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <22000>;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <52000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		vreg_l17a_2p7: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <300000>;
+		};
+
+		vreg_l18a_2p85: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <600000>;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <500000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l22a_3p0: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <150000>;
+		};
+
+		vreg_l23a_2p8: l23 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <80000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-allow-set-load;
+			regulator-system-load = <5800>;
+		};
+
+		vreg_l25a_1p1: l25 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <80000>;
+		};
+
+		vreg_l26a_1p0: l26 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l27a_1p05: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <500000>;
+		};
+
+		vreg_l28a_1p0: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <26000>;
+		};
+
+		vreg_l29a_2p8: l29 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <80000>;
+		};
+
+		vreg_l30a_1p8: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <2500>;
+		};
+
+		vreg_l31a_1p2: l31 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <600000>;
+		};
+
+		vreg_l32a_1p8: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	pmi8994_regulators: regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		vreg_s1b_1p0: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		/* S2 & S3 - VDD_GFX */
+
+		vph_pwr_bbyp: boost-bypass {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+&sdhc1 {
+	status = "okay";
+
+	/*
+	 * This device is shipped with HS400 capabable eMMCs
+	 * However various brands have been used in various product batches,
+	 * including a Samsung eMMC (BGND3R) which features a quirk with HS400.
+	 * Set the speed to HS200 as a safety measure.
+	 */
+	mmc-hs200-1_8v;
+};
+
+&sdhc2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>;
+};
+
+&tlmm {
+	grip_default: grip-default-state {
+		pins = "gpio39";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-down;
+	};
+
+	grip_sleep: grip-sleep-state {
+		pins = "gpio39";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	hall_front_default: hall-front-default-state {
+		pins = "gpio42";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	hall_back_default: hall-back-default-state {
+		pins = "gpio75";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts
new file mode 100644
index 0000000000..99388b019a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z3+/Z4";
+	compatible = "sony,ivy-row", "qcom,msm8994";
+	chassis-type = "handset";
+};
+
+&pm8994_l3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1000000>;
+};
+
+&pm8994_l17 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+/delete-node/ &pm8994_l19;
+/delete-node/ &pm8994_l32;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts
new file mode 100644
index 0000000000..71758d2cfd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z4 Tablet (LTE)";
+	compatible = "sony,karin-row", "qcom,msm8994";
+	chassis-type = "tablet";
+};
+
+&blsp2_i2c5 {
+	/*
+	 * TI LP8557 backlight driver @ 2c
+	 * AD AD7146 touch controller @ 2f
+	 * sii8620 HDMI/MHL bridge @ 72 (kitakami-common)
+	 */
+};
+
+&pm8994_l3 {
+	regulator-min-microvolt = <1050000>;
+	regulator-max-microvolt = <1050000>;
+};
+
+&pm8994_l17 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&pm8994_l22 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+};
+
+&pm8994_l25 {
+	regulator-min-microvolt = <1037500>;
+	regulator-max-microvolt = <1037500>;
+};
+
+/delete-node/ &pm8994_l32;
+/* Z4 tablets use a different touchscreen. */
+/delete-node/ &touchscreen;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts
new file mode 100644
index 0000000000..69b7df0ed6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5 Premium";
+	compatible = "sony,satsuki-row", "qcom,msm8994";
+	chassis-type = "handset";
+};
+
+&pm8994_l14 {
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <1850000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
new file mode 100644
index 0000000000..466508cd82
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5";
+	compatible = "sony,sumire-row", "qcom,msm8994";
+	chassis-type = "handset";
+};
+
+/delete-node/ &pm8994_l19;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts
new file mode 100644
index 0000000000..76bf50191f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5 Compact";
+	compatible = "sony,suzuran-row", "qcom,msm8994";
+	chassis-type = "handset";
+};
+
+&pm8994_l14 {
+	regulator-min-microvolt = <2000000>;
+	regulator-max-microvolt = <2000000>;
+};
+
+/delete-node/ &pm8994_l19;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
new file mode 100644
index 0000000000..9dbde79f26
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8994.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+
+	/*
+	 * We support MSM8994 v2 (0x20000) and v2.1 (0x20001).
+	 * The V1 chip (0x0 and 0x10000) is significantly different
+	 * and requires driver-side changes (including CPR, be warned!!).
+	 * Besides that, it's very rare.
+	 */
+	qcom,msm-id = <207 0x20000>, <207 0x20001>;
+	/* We only use pm8994+pmi8994. */
+	qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+	/* This property is shared across all kitakami devices. */
+	qcom,board-id = <8 0>;
+
+	/* Kitakami firmware doesn't support PSCI */
+	/delete-node/ psci;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-0 {
+			label = "Volume Down";
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-1 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-2 {
+			label = "Camera Snapshot";
+			gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-3 {
+			label = "Camera Focus";
+			gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@1fe00000 {
+			compatible = "ramoops";
+			reg = <0 0x1fe00000 0 0x200000>;
+			console-size = <0x100000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x80000>;
+		};
+
+		fb_region: fb_region@40000000 {
+			reg = <0 0x40000000 0 0x1000000>;
+			no-map;
+		};
+
+		tzapp: memory@c7800000 {
+			reg = <0 0xc7800000 0 0x1900000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	/* FPC fingerprint reader */
+};
+
+/* I2C1 is disabled on this board */
+
+&blsp1_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	/* NXP PN547 NFC */
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	touchscreen: rmi4-i2c-dev@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+		vdd-supply = <&pm8994_l22>;
+		vio-supply = <&pm8994_s4>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <220>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	/* sii8620 HDMI/MHL bridge */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+/*
+ * Kitakami bootloader only turns cont_splash on when it detects
+ * specific downstream MDSS/backlight nodes in the active DTB.
+ * One way to use that framebuffer is to load a secondary instance of
+ * LK with the downstream DTB appended and then, only from there, load
+ * mainline Linux.
+ */
+&cont_splash_mem {
+	reg = <0 0x03401000 0 0x2200000>;
+};
+
+&pmi8994_spmi_regulators {
+	/*
+	 * Yeah, this one *is* managed by RPMPD, but also needs
+	 * to be hacked up as a-o due to the GPU device only accepting a single
+	 * power domain.. which still isn't enough and forces us to bind
+	 * OXILI_CX and OXILI_GX together!
+	 */
+	vdd_gfx: s2 {
+		regulator-name = "VDD_GFX";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+
+		/* hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&rpm_requests {
+	/* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */
+	pmi8994_regulators: regulators-0 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		pmi8994_s1: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		/* S2 & S3 - VDD_GFX */
+
+		pmi8994_bby: boost-bypass {
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+
+	pm8994_regulators: regulators-1 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pmi8994_s1>;
+		vdd_l2_l26_l28-supply = <&pm8994_s3>;
+		vdd_l3_l11-supply = <&pm8994_s3>;
+		vdd_l4_l27_l31-supply = <&pm8994_s3>;
+		vdd_l6_l12_l32-supply = <&pm8994_s5>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>;
+		vdd_l13_l19_l23_l24-supply = <&pmi8994_bby>;
+		vdd_l14_l15-supply = <&pm8994_s5>;
+		vdd_l17_l29-supply = <&pmi8994_bby>;
+		vdd_l20_l21-supply = <&pmi8994_bby>;
+		vdd_l25-supply = <&pm8994_s3>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		/* S1, S2, S6 and S12 are managed by RPMPD */
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		/*
+		 * S8 - SPMI-managed VDD_APC0
+		 * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1
+		 */
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L5 is inaccessible from RPM */
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* L7 is inaccessible from RPM */
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_lvs1: lvs1 {
+			regulator-boot-on;
+		};
+		pm8994_lvs2: lvs2 {
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc1 {
+	/*
+	 * There is an issue with the eMMC causing permanent
+	 * damage to the card if a quirk isn't addressed.
+	 * Until it's fixed, disable the MMC so as not to brick
+	 * devices.
+	 */
+	status = "disabled";
+
+	/*
+	 * Downstream pushes 2.95V to the sdhci device,
+	 * but upstream driver REALLY wants to make vmmc 1.8v
+	 * cause of the hs400-1_8v mode. MMC works fine without
+	 * that regulator, so let's not use it for now.
+	 * vqmmc is also disabled cause driver stll complains.
+	 *
+	 * vmmc-supply = <&pm8994_l20>;
+	 * vqmmc-supply = <&pm8994_s4>;
+	 */
+};
+
+&sdhc2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8994_l21>;
+	vqmmc-supply = <&pm8994_l13>;
+};
+
+&tlmm {
+	ts_int_active: ts-int-active-state {
+		pins = "gpio42";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
new file mode 100644
index 0000000000..c326257152
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -0,0 +1,1112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8994.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc1 = &sdhc1;
+		mmc2 = &sdhc2;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				cpu6_map: core2 {
+					cpu = <&CPU6>;
+				};
+
+				cpu7_map: core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8994", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "hvc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8994-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+			qcom,remote-pid = <6>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8994";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8994-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dfps_data_mem: dfps_data_mem@3400000 {
+			reg = <0 0x03400000 0 0x1000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@3401000 {
+			reg = <0 0x03401000 0 0x2200000>;
+			no-map;
+		};
+
+		smem_mem: smem_region@6a00000 {
+			reg = <0 0x06a00000 0 0x200000>;
+			no-map;
+		};
+
+		mpss_mem: memory@7000000 {
+			reg = <0 0x07000000 0 0x5a00000>;
+			no-map;
+		};
+
+		peripheral_region: memory@ca00000 {
+			reg = <0 0x0ca00000 0 0x1f00000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@c6400000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xc6400000 0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		mba_mem: memory@c6700000 {
+			reg = <0 0xc6700000 0 0x100000>;
+			no-map;
+		};
+
+		audio_mem: memory@c7000000 {
+			reg = <0 0xc7000000 0 0x800000>;
+			no-map;
+		};
+
+		adsp_mem: memory@c9400000 {
+			reg = <0 0xc9400000 0 0x3f00000>;
+			no-map;
+		};
+
+		reserved@6c00000 {
+			reg = <0 0x06c00000 0 0x400000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: mailbox@f900d000 {
+			compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
+			reg = <0xf900d000 0x2000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <10>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		usb3: usb@f92f8800 {
+			compatible = "qcom,msm8994-dwc3", "qcom,dwc3";
+			reg = <0xf92f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+
+			usb@f9200000 {
+				compatible = "snps,dwc3";
+				reg = <0xf9200000 0xcc00>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				maximum-speed = "high-speed";
+				dr_mode = "peripheral";
+			};
+		};
+
+		sdhc1: mmc@f9824900 {
+			compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc2: mmc@f98a4900 {
+			compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+			cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@f9904000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0xf9904000 0x19000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <24>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@f9923000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9923000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@f9923000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0xf9923000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_spi1_default>;
+			pinctrl-1 = <&blsp1_spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@f9924000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9924000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		/* I2C3 doesn't exist */
+
+		blsp1_i2c4: i2c@f9926000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9926000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 18>, <&blsp1_dma 19>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c5: i2c@f9927000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9927000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c6: i2c@f9928000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9928000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <24>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+					<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 2>, <&blsp2_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_default>;
+			pinctrl-1 = <&blsp2_uart2_sleep>;
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@f9963000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9963000 0x500>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi4: spi@f9966000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0xf9966000 0x500>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 18>, <&blsp2_dma 19>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_spi10_default>;
+			pinctrl-1 = <&blsp2_spi10_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c5: i2c@f9967000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9967000 0x500>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <355000>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c11_default>;
+			pinctrl-1 = <&i2c11_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8994";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x2000>;
+
+			clock-names = "xo", "sleep";
+			clocks = <&xo_board>, <&sleep_clk>;
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			reg-names = "core", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8994-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart2_default: blsp2-uart2-default-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				function = "blsp_uart8";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_default: i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_default: i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_default: i2c4-default-state {
+				pins = "gpio19", "gpio20";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_sleep: i2c4-sleep-state {
+				pins = "gpio19", "gpio20";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			i2c5_default: i2c5-default-state {
+				pins = "gpio23", "gpio24";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep-state {
+				pins = "gpio23", "gpio24";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_default: i2c6-default-state {
+				pins = "gpio28", "gpio27";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep-state {
+				pins = "gpio28", "gpio27";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_default: i2c7-default-state {
+				pins = "gpio44", "gpio43";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep-state {
+				pins = "gpio44", "gpio43";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_spi10_default: blsp2-spi10-default-state {
+				default-pins {
+					pins = "gpio53", "gpio54", "gpio55";
+					function = "blsp_spi10";
+					drive-strength = <10>;
+					bias-pull-down;
+				};
+
+				cs-pins {
+					pins = "gpio67";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp2_spi10_sleep: blsp2-spi10-sleep-state {
+				pins = "gpio53", "gpio54", "gpio55";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c11_default: i2c11-default-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c11_sleep: i2c11-sleep-state {
+				pins = "gpio83", "gpio84";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				default-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <10>;
+					bias-pull-down;
+				};
+
+				cs-pins {
+					pins = "gpio8";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi1_sleep: blsp1-spi1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_clk_on: clk-on-state {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc1_clk_off: clk-off-state {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: cmd-on-state {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_cmd_off: cmd-off-state {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: data-on-state {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_data_off: data-off-state {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: rclk-on-state {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: rclk-off-state {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc2_clk_on: sdc2-clk-on-state {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <10>;
+			};
+
+			sdc2_clk_off: sdc2-clk-off-state {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc2_cmd_on: sdc2-cmd-on-state {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_cmd_off: sdc2-cmd-off-state {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc2_data_on: sdc2-data-on-state {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_data_off: sdc2-data-off-state {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8994";
+			reg = <0xfd8c0000 0x5200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			clock-names = "xo",
+				      "gpll0",
+				      "mmssnoc_ahb",
+				      "oxili_gfx3d_clk_src",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "hdmipll";
+			clocks = <&xo_board>,
+				 <&gcc GPLL0_OUT_MMSSCC>,
+				 <&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>,
+				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			assigned-clocks = <&mmcc MMPLL0_PLL>,
+					  <&mmcc MMPLL1_PLL>,
+					  <&mmcc MMPLL3_PLL>,
+					  <&mmcc MMPLL4_PLL>,
+					  <&mmcc MMPLL5_PLL>;
+			assigned-clock-rates = <800000000>,
+					       <1167000000>,
+					       <1020000000>,
+					       <960000000>,
+					       <600000000>;
+		};
+
+		ocmem: sram@fdd00000 {
+			compatible = "qcom,msm8974-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x200000>;
+			reg-names = "ctrl", "mem";
+			ranges = <0 0xfec00000 0x200000>;
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+				 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+			clock-names = "core", "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x180000>;
+			};
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 0xff08>,
+			     <GIC_PPI 3 0xff08>,
+			     <GIC_PPI 4 0xff08>,
+			     <GIC_PPI 1 0xff08>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
new file mode 100644
index 0000000000..6e9c9caf25
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
+	compatible = "qcom,msm8996-mtp", "qcom,msm8996";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&mdss_hdmi {
+	status = "okay";
+};
+
+&mdss_hdmi_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
new file mode 100644
index 0000000000..ec5457508f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -0,0 +1,801 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		constant-charge-current-max-microamp = <3000000>;
+		voltage-min-design-microvolt = <3400000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	clocks {
+		div1_mclk: div1-clk {
+			compatible = "gpio-gate-clock";
+			pinctrl-names = "default";
+			pinctrl-0 = <&audio_mclk>;
+			#clock-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+			enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		divclk4: div4-clk {
+			compatible = "fixed-clock";
+			pinctrl-names = "default";
+			pinctrl-0 = <&divclk4_pin_a>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "divclk4";
+		};
+	};
+
+	reserved-memory {
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0 0xac000000 0 0x200000>;
+			record-size = <0x20000>;
+			console-size = <0x100000>;
+			pmsg-size = <0x80000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wlan_en: wlan-en-regulator {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	tfa9890_amp: audio-codec@36 {
+		compatible = "nxp,tfa9890";
+		reg = <0x36>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	bq27541: fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+	};
+};
+
+&blsp1_uart2 {
+	label = "BT-UART";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_gpios>;
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		clocks = <&divclk4>;
+	};
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	synaptics_rmi4_i2c: touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touch_default>;
+		pinctrl-1 = <&touch_suspend>;
+		vdd-supply = <&vreg_l22a_3p0>;
+		vio-supply = <&vreg_s4a_1p8>;
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <122>;
+		};
+	};
+};
+
+&blsp2_uart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+	status = "okay";
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&hsusb_phy2 {
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l2a_1p25>;
+	vcca-supply = <&vreg_l22a_3p0>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vcca-supply = <&vreg_l28a_0p925>;
+	status = "okay";
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+	pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	status = "okay";
+};
+
+&pm8994_gpios {
+	bt_en_gpios: bt-en-gpios-state {
+		pins = "gpio19";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+
+	wlan_en_gpios: wlan-en-gpios-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+
+	audio_mclk: divclk1-state {
+		pins = "gpio15";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		power-source = <PM8994_GPIO_S4>;
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pins = "gpio18";
+		function = PMIC_GPIO_FUNC_FUNC2;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+	};
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+
+	s9 {
+		qcom,saw-slave;
+	};
+
+	s10 {
+		qcom,saw-slave;
+	};
+
+	s11 {
+		qcom,saw-leader;
+		regulator-min-microvolt = <1140000>;
+		regulator-max-microvolt = <1140000>;
+		regulator-max-step-microvolt = <150000>;
+		regulator-always-on;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2 {
+		regulator-name = "vdd-gfx";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <1230000>;
+	};
+};
+
+&q6asmdai {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		vreg_s7a_0p8: s7 {
+			regulator-name = "vreg_s7a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3a_1p1: l3 {
+			regulator-name = "vreg_l3a_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		vreg_l17a_2p6: l17 {
+			regulator-name = "vreg_l17a_2p6";
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+		};
+
+		vreg_l18a_3p3: l18 {
+			regulator-name = "vreg_l18a_3p3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-name = "vreg_l19a_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		vreg_l27a_1p2: l27 {
+			regulator-name = "vreg_l27a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&slim_msm {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&div1_mclk>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "OnePlus3";
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",
+			"MIC BIAS2", "Headset Mic",
+			"AMIC4", "MIC BIAS1",
+			"MIC BIAS1", "Primary Mic",
+			"AMIC5", "MIC BIAS3",
+			"MIC BIAS3", "Noise Mic";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	mm7-dai-link {
+		link-name = "MultiMedia7";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>;
+		};
+	};
+
+	mm8-dai-link {
+		link-name = "MultiMedia8";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>;
+		};
+	};
+
+	mm9-dai-link {
+		link-name = "MultiMedia9";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA9>;
+		};
+	};
+
+	mm10-dai-link {
+		link-name = "MultiMedia10";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA10>;
+		};
+	};
+
+	mm11-dai-link {
+		link-name = "MultiMedia11";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA11>;
+		};
+	};
+
+	mm12-dai-link {
+		link-name = "MultiMedia12";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA12>;
+		};
+	};
+
+	mm13-dai-link {
+		link-name = "MultiMedia13";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA13>;
+		};
+	};
+
+	mm14-dai-link {
+		link-name = "MultiMedia14";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA14>;
+		};
+	};
+
+	mm15-dai-link {
+		link-name = "MultiMedia15";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA15>;
+		};
+	};
+
+	mm16-dai-link {
+		link-name = "MultiMedia16";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA16>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+
+	speaker-dai-link {
+		link-name = "Speaker";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		codec {
+			sound-dai = <&tfa9890_amp>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <81 4>;
+
+	mdss_dsi_active: mdss-dsi-active-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_suspend: mdss-dsi-suspend-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_active: mdss-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_suspend: mdss-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	touch_default: touch-default-state {
+		pins = "gpio89", "gpio125", "gpio49";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	touch_suspend: touch-suspend-state {
+		pins = "gpio89", "gpio125", "gpio49";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&ufsphy {
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+
+	status = "okay";
+};
+
+&ufshc {
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	phys = <&hsusb_phy1>;
+	phy-names = "usb2-phy";
+
+	maximum-speed = "high-speed";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
new file mode 100644
index 0000000000..dfe75119b8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 3";
+	compatible = "oneplus,oneplus3", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,board-id = <8 0 15801 15>, <8 0 15801 16>;
+	qcom,msm-id = <246 0x30001>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/oneplus3/adsp.mbn";
+	status = "okay";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3000000>;
+	voltage-max-design-microvolt = <4350000>;
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/oneplus3/mba.mbn",
+			"qcom/msm8996/oneplus3/modem.mbn";
+	status = "okay";
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/oneplus3/slpi.mbn";
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/oneplus3/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
new file mode 100644
index 0000000000..51fce65e89
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 3T";
+	compatible = "oneplus,oneplus3t", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,board-id = <8 0 15811 26>,
+			<8 0 15811 27>,
+			<8 0 15811 28>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn";
+	status = "okay";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3400000>;
+	voltage-max-design-microvolt = <4400000>;
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/mba.mbn",
+			"qcom/msm8996/oneplus3t/modem.mbn";
+	status = "okay";
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn";
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/oneplus3t/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts
new file mode 100644
index 0000000000..6374c5f53d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8996-sony-xperia-tone.dtsi"
+
+/ {
+	model = "Sony Xperia X Performance";
+	compatible = "sony,dora-row", "qcom,msm8996";
+	chassis-type = "handset";
+};
+
+/delete-node/ &tof_sensor;
+/delete-node/ &pm8994_l11;
+/delete-node/ &pm8994_l14;
+
+&usb_detect {
+	pins = "gpio24";
+};
+
+&usb3_id {
+	id-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts
new file mode 100644
index 0000000000..d3100ddf92
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8996-sony-xperia-tone.dtsi"
+
+/ {
+	model = "Sony Xperia XZ";
+	compatible = "sony,kagura-row", "qcom,msm8996";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts
new file mode 100644
index 0000000000..3e5bdaba83
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8996-sony-xperia-tone.dtsi"
+
+/ {
+	model = "Sony Xperia XZs";
+	compatible = "sony,keyaki-row", "qcom,msm8996";
+	chassis-type = "handset";
+};
+
+&pm8994_l19 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&pm8994_l30 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-pull-down;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
new file mode 100644
index 0000000000..d55e407504
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &gpu_mem;
+
+/ {
+	qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */
+	qcom,board-id = <8 0>;
+
+	chosen {
+		bootargs = "maxcpus=2";
+	};
+
+	reserved-memory {
+		ramoops@a7f00000 {
+			compatible = "ramoops";
+			reg = <0 0xa7f00000 0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+
+		adsp_mem: adsp@8ea00000 {
+			reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x90400000 0x0 0x2000>;
+			no-map;
+		};
+
+		slpi_mem: memory@90500000 {
+			reg = <0 0x90500000 0 0xa00000>;
+			no-map;
+		};
+
+		venus_mem: memory@90f00000 {
+			reg = <0 0x90f00000 0 0x500000>;
+			no-map;
+		};
+	};
+
+	panel_tvdd: tvdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_tvdd";
+		gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&tp_vddio_en>;
+		pinctrl-names = "default";
+	};
+
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_detect>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl_reg_on>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c3 {
+	clock-frequency = <355000>;
+	status = "okay";
+
+	tof_sensor: vl53l0x@29 {
+		compatible = "st,vl53l0x";
+		reg = <0x29>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c5 {
+	clock-frequency = <355000>;
+	status = "okay";
+
+	/* FUSB301 USB-C controller */
+};
+
+&blsp2_i2c6 {
+	clock-frequency = <355000>;
+	status = "okay";
+
+	synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&panel_tvdd>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <220>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&camera0_mclk {
+	drive-strength = <2>;
+	output-low;
+};
+
+&camera0_pwdn {
+	drive-strength = <2>;
+	output-low;
+};
+
+&camera0_rst {
+	pins = "gpio30";
+	drive-strength = <2>;
+	output-low;
+};
+
+&camera2_mclk {
+	drive-strength = <2>;
+	output-low;
+};
+
+&camera2_rst {
+	drive-strength = <2>;
+	output-low;
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
+	vdda-phy-dpdm-supply = <&pm8994_l24>;
+	status = "okay";
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&pm8994_l28>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
+	status = "okay";
+};
+
+&pm8994_gpios {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pm8994_gpios_defaults>;
+	gpio-line-names =
+		"NC",
+		"VOL_DOWN_N",
+		"VOL_UP_N",
+		"SNAPSHOT_N",
+		"FOCUS_N",
+		"NC",
+		"NFC_VEN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"EAR_EN",
+		"NC",
+		"PM_DIVCLK1",
+		"PMI_CLK",
+		"NC",
+		"WL_SLEEP_CLK",
+		"NC",
+		"PMIC_SPON",
+		"UIM_BATT_ALARM",
+		"PMK_SLEEP_CLK";
+
+	/*
+	 * We don't yet know for sure which GPIOs are of our interest, but what
+	 * we do know is that if a vendor sets the pins to a non-default state, there's
+	 * probably a reason for it, and just to be on the safe side, we follow suit.
+	 */
+	pm8994_gpios_defaults: pm8994-gpios-default-state {
+		pm8994-gpio1-nc-pins {
+			pins = "gpio1";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+		};
+
+		vol-down-n-pins {
+			pins = "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		vol-up-n-pins {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-pull-up;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		camera-snapshot-n-pins {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		camera-focus-n-pins {
+			pins = "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio6-nc-pins {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		nfc-download-pins {
+			pins = "gpio7";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			drive-push-pull;
+			bias-disable;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio8-nc-pins {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			drive-push-pull;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pm8994-gpio9-nc-pins {
+			pins = "gpio9";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-high;
+			drive-push-pull;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		nfc-clock-pins {
+			pins = "gpio10";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			drive-push-pull;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio11-nc-pins {
+			pins = "gpio11";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pm8994-gpio12-nc-pins {
+			pins = "gpio12";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		ear-enable-pins {
+			pins = "gpio13";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-high;
+			drive-push-pull;
+			bias-disable;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio14-nc-pins {
+			pins = "gpio14";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pm-divclk1-gpio-pins {
+			pins = "gpio15";
+			function = "func1";
+			output-high;
+			drive-push-pull;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pmi-clk-gpio-pins {
+			pins = "gpio16";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+		};
+
+		pm8994-gpio17-nc-pins {
+			pins = "gpio17";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		rome-sleep-pins {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+			output-low;
+			drive-push-pull;
+			bias-disable;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio19-nc-pins {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			drive-push-pull;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pm8994-gpio22-nc-pins {
+			pins = "gpio22";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+	};
+};
+
+&pm8994_mpps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pm8994_mpps_defaults>;
+
+	gpio-line-names =
+		"SDC_UIM_VBIAS",
+		"LCD_ID_ADC",
+		"VREF_DACX",
+		"NC",
+		"FLASH_THERM",
+		"NC",
+		"NC",
+		"RF_ID";
+
+	pm8994_mpps_defaults: pm8994-mpps-default-state {
+		lcd-id_adc-mpp-pins {
+			pins = "mpp2";
+			function = "analog";
+			input-enable;
+			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
+		};
+
+		pm-mpp4-nc-pins {
+			pins = "mpp4";
+			function = "digital";
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		flash-therm-mpp-pins {
+			pins = "mpp5";
+			function = "analog";
+			input-enable;
+			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+		};
+
+		mpp6-nc-pins {
+			pins = "mpp6";
+			function = "digital";
+			bias-high-impedance;
+		};
+
+		rf-id-mpp-pins {
+			pins = "mpp8";
+			function = "analog";
+			input-enable;
+			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>;
+		};
+	};
+};
+
+&pm8994_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&pmi8994_gpios {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmi8994_gpios_defaults>;
+
+	gpio-line-names =
+		"VIB_LDO_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB_SWITCH_SEL",
+		"NC";
+
+	pmi8994_gpios_defaults: pmi8994-gpios-default-state {
+		vib-ldo-en-gpio-pins {
+			pins = "gpio1";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-low;
+			bias-disable;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio2-nc-pins {
+			pins = "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pmi-gpio3-nc-pins {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pmi-gpio4-nc-pins {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio5-nc-pins {
+			pins = "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio6-nc-pins {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio7-nc-pins {
+			pins = "gpio7";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio8-nc-pins {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		usb-switch-sel-pins {
+			pins = "gpio9";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+		};
+
+		pmi-gpio10-nc-pins {
+			pins = "gpio10";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			drive-push-pull;
+			bias-disable;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+	};
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+
+	pm8994_s9: s9 {
+		qcom,saw-slave;
+	};
+
+	pm8994_s10: s10 {
+		qcom,saw-slave;
+	};
+
+	pm8994_s11: s11 {
+		qcom,saw-leader;
+		regulator-name = "vdd_apcc";
+		regulator-always-on;
+		regulator-min-microvolt = <470000>;
+		regulator-max-microvolt = <1140000>;
+	};
+};
+
+&pmi8994_lpg {
+	qcom,power-source = <1>;
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx:
+	pmi8994_s2: s2 {
+		/* Pinned to a high value for now to avoid random crashes. */
+		regulator-min-microvolt = <1015000>;
+		regulator-max-microvolt = <1015000>;
+		regulator-name = "vdd_gfx";
+		regulator-always-on;
+	};
+};
+
+&pmi8994_wled {
+	default-brightness = <512>;
+	qcom,num-strings = <3>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8994_s3>;
+		vdd_l2_l26_l28-supply = <&pm8994_s3>;
+		vdd_l3_l11-supply = <&pm8994_s3>;
+		vdd_l4_l27_l31-supply = <&pm8994_s3>;
+		vdd_l5_l7-supply = <&pm8994_s5>;
+		vdd_l6_l12_l32-supply = <&pm8994_s5>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l14_l15-supply = <&pm8994_s5>;
+		vdd_l20_l21-supply = <&pm8994_s5>;
+		vdd_l25-supply = <&pm8994_s3>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <325000>;
+			regulator-always-on;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L6 and L7 seem unused. */
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <22000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l30: l30 { };
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&sdhc1 {
+	vmmc-supply = <&pm8994_l20>;
+	vqmmc-supply = <&pm8994_s4>;
+	mmc-hs400-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8994_l21>;
+	vqmmc-supply = <&pm8994_l13>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+	pinctrl-0 = <&sw_service_gpio>;
+	pinctrl-names = "default";
+
+	disp_reset_n_gpio: disp-reset-n-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdp_vsync_p_gpio: mdp-vsync-p-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sw_service_gpio: sw-service-gpio-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_detect: usb-detect-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	uim_detect_en: uim-detect-en-state {
+		pins = "gpio29";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	tray_det_pin: tray-det-state {
+		pins = "gpio40";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tp_vddio_en: tp-vddio-en-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	lcd_vddio_en: lcd-vddio-en-state {
+		pins = "gpio51";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	wl_host_wake: wl-host-wake-state {
+		pins = "gpio79";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	wl_reg_on: wl-reg-on-state {
+		pins = "gpio84";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	ts_reset_n: ts-rst-n-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+	};
+
+	touch_int_n: touch-int-n-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	touch_int_sleep: touch-int-sleep-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&usb3 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&usb3_id>;
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	phys = <&hsusb_phy1>;
+	phy-names = "usb2-phy";
+	snps,hird-threshold = /bits/ 8 <0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi
new file mode 100644
index 0000000000..929bdcd45d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	qcom,msm-id = <246 0x30000>;
+};
+
+ /*
+  * This revision seems to have differ GPU CPR
+  * parameters, GPU frequencies and some differences
+  * when it comes to voltage delivery to.. once again
+  * the GPU. Funnily enough, it's simpler to make it an
+  * overlay on top of 3.1 (the final one) than vice versa.
+  * The differences will show here as more and more
+  * features get enabled upstream.
+  */
+
+gpu_opp_table_3_0: opp-table-gpu30 {
+	compatible = "operating-points-v2";
+
+	opp-624000000 {
+		opp-hz = /bits/ 64 <624000000>;
+		opp-level = <7>;
+	};
+
+	opp-560000000 {
+		opp-hz = /bits/ 64 <560000000>;
+		opp-level = <6>;
+	};
+
+	opp-510000000 {
+		opp-hz = /bits/ 64 <510000000>;
+		opp-level = <5>;
+	};
+
+	opp-401800000 {
+		opp-hz = /bits/ 64 <401800000>;
+		opp-level = <4>;
+	};
+
+	opp-315000000 {
+		opp-hz = /bits/ 64 <315000000>;
+		opp-level = <3>;
+	};
+
+	opp-214000000 {
+		opp-hz = /bits/ 64 <214000000>;
+		opp-level = <3>;
+	};
+
+	opp-133000000 {
+		opp-hz = /bits/ 64 <133000000>;
+		opp-level = <3>;
+	};
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table_3_0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
new file mode 100644
index 0000000000..06f8ff6241
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -0,0 +1,754 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
+ */
+
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	divclk1_cdc: divclk1 {
+		compatible = "gpio-gate-clock";
+		clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+		#clock-cells = <0>;
+		enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&divclk1_default>;
+	};
+
+	divclk4: divclk4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "divclk4";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&divclk4_pin_a>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-dome {
+			label = "Home";
+			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	irled {
+		compatible = "pwm-ir-tx";
+		pwms = <&pm8994_lpg 1 1000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&irled_default>;
+	};
+
+	reserved-memory {
+		memory@88800000 {
+			reg = <0x0 0x88800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		/* This platform has all PIL regions offset by 0x1400000 */
+		/delete-node/ mpss@88800000;
+		mpss_mem: mpss@89c00000 {
+			reg = <0x0 0x89c00000 0x0 0x6200000>;
+			no-map;
+		};
+
+		/delete-node/ adsp@8ea00000;
+		adsp_mem: adsp@8fe00000 {
+			reg = <0x0 0x8fe00000 0x0 0x1b00000>;
+			no-map;
+		};
+
+		/delete-node/ slpi@90500000;
+		slpi_mem: slpi@91900000 {
+			reg = <0x0 0x91900000 0x0 0xa00000>;
+			no-map;
+		};
+
+		/delete-node/ gpu@90f00000;
+		gpu_mem: gpu@92300000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x92300000 0x0 0x2000>;
+			no-map;
+		};
+
+		/delete-node/ venus@91000000;
+		venus_mem: venus@92400000 {
+			reg = <0x0 0x92400000 0x0 0x500000>;
+			no-map;
+		};
+
+		ramoops@92900000 {
+			compatible = "ramoops";
+			reg = <0x0 0x92900000 0x0 0x100000>;
+			no-map;
+
+			record-size = <0x8000>;
+			console-size = <0x80000>;
+			ftrace-size = <0x20000>;
+			pmsg-size = <0x40000>;
+		};
+
+		/delete-node/ rmtfs;
+		rmtfs@f6c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf6c00000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		/delete-node/ mba@91500000;
+		mba_mem: mba@f6f00000 {
+			reg = <0x0 0xf6f00000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v2_tp: vdd-3v2-tp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v2_tp";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		startup-delay-us = <4000>;
+		vin-supply = <&vph_pwr>;
+
+		gpio = <&tlmm 73 0>;
+		enable-active-high;
+	};
+
+	vdd_3v3: rome-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <4000>;
+		vin-supply = <&vph_pwr_bbyp>;
+
+		gpio = <&pm8994_gpios 9 0>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rome_enable_default>;
+
+		/* Required by QCA6174a - vddpe-3v3 */
+		regulator-always-on;
+	};
+
+	/* WL_EN pin defined as a fixed regulator */
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default>;
+	};
+};
+
+&adsp_pil {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	nfc: nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_default>;
+	};
+};
+
+&blsp2_i2c3 {
+	status = "okay";
+
+	typec: typec@47 {
+		compatible = "ti,tusb320l";
+		reg = <0x47>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <63 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+	/* MSM_TS */
+};
+
+&blsp1_uart2 {
+	status = "okay";
+	label = "QCA_UART";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		clocks = <&divclk4>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l2a_1p25>;
+	vddio-supply = <&vreg_l14a_1p8>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
+	pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
+};
+
+&mdss_dsi0_out {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+
+	vcca-supply = <&vreg_l28a_0p925>;
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+	status = "okay";
+
+	pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pcie0 {
+	status = "okay";
+
+	/* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pm8994_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8994_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+};
+
+&pmi8994_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&slim_msm {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&divclk1_cdc>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-vbat-supply = <&vph_pwr>;
+			vdd-micbias-supply = <&vph_pwr_bbyp>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
+};
+
+&slpi_pil {
+	status = "okay";
+
+	px-supply = <&vreg_lvs2a_1p8>;
+};
+
+&usb3 {
+	status = "okay";
+	extcon = <&typec>;
+
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb3_dwc3 {
+	extcon = <&typec>;
+
+	/* usb3-phy is not used on this device */
+	phys = <&hsusb_phy1>;
+	phy-names = "usb2-phy";
+
+	maximum-speed = "high-speed";
+	snps,is-utmi-l1-suspend;
+	snps,usb2-gadget-lpm-disable;
+	snps,hird-threshold = /bits/ 8 <0>;
+};
+
+&hsusb_phy1 {
+	status = "okay";
+	extcon = <&typec>;
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&vreg_s1b_1p025>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+
+			/* Required by QCA6174a - vdd-core */
+			regulator-always-on;
+		};
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+
+			/* Required by QCA6174a - vddio */
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_0p8: s7 {
+			regulator-name = "vreg_s7a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p8: l6 {
+			regulator-name = "vreg_l6a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l19a_3p3: l19 {
+			regulator-name = "vreg_l19a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l27a_1p2: l27 {
+			regulator-name = "vreg_l27a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			/* Required by QCA6174a - vddio-xtal */
+			regulator-always-on;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		vreg_s1b_1p025: s1 {
+			regulator-name = "vreg_s1b_1p025";
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		vph_pwr_bbyp: boost-bypass {
+			regulator-name = "vph_pwr_bbyp";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+	s8 {
+		qcom,saw-slave;
+	};
+	s9 {
+		qcom,saw-slave;
+	};
+	s10 {
+		qcom,saw-slave;
+	};
+	vreg_apc_0p8: s11 {
+		qcom,saw-leader;
+		regulator-name = "vreg_apc_0p8";
+		regulator-min-microvolt = <470000>;
+		regulator-max-microvolt = <1140000>;
+		regulator-max-step-microvolt = <150000>;
+		regulator-always-on;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2 {
+		regulator-name = "vdd_gfx";
+		regulator-min-microvolt = <400000>;
+		regulator-max-microvolt = <1015000>;
+		regulator-enable-ramp-delay = <500>;
+	};
+};
+
+&pm8994_gpios {
+	irled_default: irled-default-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
+	};
+
+	wlan_en_default: wlan-en-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
+	};
+
+	rome_enable_default: rome-enable-state {
+		pins = "gpio9";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-high;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <PM8994_GPIO_VPH>;
+	};
+
+	divclk1_default: divclk1-state {
+		pins = "gpio15";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pins = "gpio18";
+		function = PMIC_GPIO_FUNC_FUNC2;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+	};
+};
+
+&tlmm {
+	mdss_dsi_default: mdss-dsi-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_sleep: mdss-dsi-sleep-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_default: mdss-te-default-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_sleep: mdss-te-sleep-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	nfc_default: nfc-default-state {
+		pins = "gpio12", "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
new file mode 100644
index 0000000000..f8e9d90afa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+#include "msm8996-xiaomi-common.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+#include <dt-bindings/input/ti-drv260x.h>
+
+/ {
+	model = "Xiaomi Mi 5";
+	compatible = "xiaomi,gemini", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,msm-id = <246 0x30001>;
+	qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>;
+	qcom,board-id = <31 0>;
+
+	divclk2_haptics: divclk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "divclk2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&divclk2_pin_a>;
+	};
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/gemini/adsp.mbn";
+};
+
+&blsp2_i2c3 {
+	haptics: drv2604@5a {
+		compatible = "ti,drv2604";
+		reg = <0x5a>;
+		enable-gpio = <&tlmm 93 0x00>;
+		mode = <DRV260X_LRA_MODE>;
+		library-sel = <DRV260X_LIB_LRA>;
+		pinctrl-names = "default","sleep";
+		pinctrl-0 = <&vibrator_default>;
+		pinctrl-1 = <&vibrator_sleep>;
+	};
+
+	lp5562@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-gpios = <&pm8994_gpios 7 1>;
+		clock-mode = /bits/8 <2>;
+		label = "button-backlight";
+
+		led@0 {
+			reg = <0>;
+			chan-name = "button-backlight";
+			led-cur = /bits/ 8 <0x32>;
+			max-cur = /bits/ 8 <0xc8>;
+		};
+
+		led@1 {
+			reg = <0>;
+			chan-name = "button-backlight1";
+			led-cur = /bits/ 8 <0x32>;
+			max-cur = /bits/ 8 <0xc8>;
+		};
+	};
+};
+
+&blsp2_i2c6 {
+	synaptics@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+		vio-supply = <&vreg_l6a_1p8>;
+		vdd-supply = <&vdd_3v2_tp>;
+		reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-1 = <&touchscreen_sleep>;
+	};
+
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/gemini/a530_zap.mbn";
+	};
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l2a_1p25>;
+	vdda-supply = <&vreg_l19a_3p3>;
+	vddio-supply = <&vreg_l14a_1p8>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
+	pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
+
+	panel: panel@0 {
+		compatible = "jdi,fhd-r63452";
+		reg = <0>;
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+		backlight = <&pmi8994_wled>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&pmi8994_wled {
+	status = "okay";
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/gemini/mba.mbn",
+			"qcom/msm8996/gemini/modem.mbn";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/gemini/slpi.mbn";
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "gemini";
+	audio-routing = "RX_BIAS", "MCLK",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/gemini/venus.mbn";
+};
+
+&rpm_requests {
+	regulators-0 {
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l29a_2p7: l29 {
+			regulator-name = "vreg_l29a_2p7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"VOL_UP_N",		/* GPIO_2  */
+		"SPKR_ID",		/* GPIO_3  */
+		"PWM_HAPTICS",		/* GPIO_4  */
+		"INFARED_DRV",		/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"KEYPAD_LED_EN",	/* GPIO_7  */
+		"WL_EN",		/* GPIO_8  */
+		"3P3_ENABLE",		/* GPIO_9  */
+		"FP_ID",		/* GPIO_10 */
+		"NC",			/* GPIO_11 */
+		"NC",			/* GPIO_12 */
+		"NC",			/* GPIO_13 */
+		"NC",			/* GPIO_14 */
+		"DIVCLK1_CDC",		/* GPIO_15 */
+		"DIVCLK2_HAPTICS",	/* GPIO_16 */
+		"NC",			/* GPIO_17 */
+		"32KHz_CLK_IN",		/* GPIO_18 */
+		"BT_EN",		/* GPIO_19 */
+		"PMIC_SLB",		/* GPIO_20 */
+		"UIM_BATT_ALARM",	/* GPIO_21 */
+		"NC";			/* GPIO_22 */
+
+	divclk2_pin_a: divclk2-state {
+		pins = "gpio16";
+		function = PMIC_GPIO_FUNC_FUNC2;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+	};
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"NC",			/* MPP_1 */
+		"CCI_TIMER1",		/* MPP_2 */
+		"PMIC_SLB",		/* MPP_3 */
+		"EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
+		"NC",			/* MPP_5 */
+		"NC",			/* MPP_6 */
+		"NC",			/* MPP_7 */
+		"NC";			/* MPP_8 */
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"SPKR_PA_RST",		/* GPIO_2  */
+		"NC",			/* GPIO_3  */
+		"NC",			/* GPIO_4  */
+		"NC",			/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"NC",			/* GPIO_7  */
+		"NC",			/* GPIO_8  */
+		"NC",			/* GPIO_9  */
+		"NC";			/* GPIO_10 */
+};
+
+&tlmm {
+	gpio-line-names =
+		"ESE_SPI_MOSI",		/* GPIO_0   */
+		"ESE_SPI_MISO",		/* GPIO_1   */
+		"ERR_INT_N",		/* GPIO_2   */
+		"ESE_SPI_CLK",		/* GPIO_3   */
+		"MSM_UART_TX",		/* GPIO_4   */
+		"MSM_UART_RX",		/* GPIO_5   */
+		"NFC_I2C_SDA",		/* GPIO_6   */
+		"NFC_I2C_SCL",		/* GPIO_7   */
+		"LCD0_RESET_N",		/* GPIO_8   */
+		"NFC_IRQ",		/* GPIO_9   */
+		"LCD_TE",		/* GPIO_10  */
+		"LCD_ID_DET1",		/* GPIO_11  */
+		"NFC_DISABLE",		/* GPIO_12  */
+		"CAM_MCLK0",		/* GPIO_13  */
+		"NC",			/* GPIO_14  */
+		"CAM_MCLK2",		/* GPIO_15  */
+		"ESE_PWR_REQ",		/* GPIO_16  */
+		"CCI_I2C_SDA0",		/* GPIO_17  */
+		"CCI_I2C_SCL0",		/* GPIO_18  */
+		"CCI_I2C_SDA1",		/* GPIO_19  */
+		"CCI_I2C_SCL1",		/* GPIO_20  */
+		"NFC_DWL_REQ",		/* GPIO_21  */
+		"CCI_TIMER1",		/* GPIO_22  */
+		"WEBCAM1_RESET_N",	/* GPIO_23  */
+		"ESE_IRQ",		/* GPIO_24  */
+		"NC",			/* GPIO_25  */
+		"WEBCAM1_STANDBY",	/* GPIO_26  */
+		"NC",			/* GPIO_27  */
+		"NC",			/* GPIO_28  */
+		"NC",			/* GPIO_29  */
+		"CAM1_RST_N",		/* GPIO_30  */
+		"NC",			/* GPIO_31  */
+		"NC",			/* GPIO_32  */
+		"NC",			/* GPIO_33  */
+		"FP_DOME_SW",		/* GPIO_34  */
+		"PCI_E0_RST_N",		/* GPIO_35  */
+		"PCI_E0_CLKREQ_N",	/* GPIO_36  */
+		"PCI_E0_WAKE",		/* GPIO_37  */
+		"FM_INT_N",		/* GPIO_38  */
+		"FM_RESET_N",		/* GPIO_39  */
+		"NC",			/* GPIO_40  */
+		"QCA_UART_TXD",		/* GPIO_41  */
+		"QCA_UART_RXD",		/* GPIO_42  */
+		"QCA_UART_CTS",		/* GPIO_43  */
+		"QCA_UART_RTS",		/* GPIO_44  */
+		"MAWC_UART_TX",		/* GPIO_45  */
+		"MAWC_UART_RX",		/* GPIO_46  */
+		"NC",			/* GPIO_47  */
+		"NC",			/* GPIO_48  */
+		"AUDIO_SWITCH_EN",	/* GPIO_49  */
+		"FP_SPI_RST",		/* GPIO_50  */
+		"TYPEC_I2C_SDA",	/* GPIO_51  */
+		"TYPEC_I2C_SCL",	/* GPIO_52  */
+		"CODEC_INT2_N",		/* GPIO_53  */
+		"CODEC_INT1_N",		/* GPIO_54  */
+		"APPS_I2C7_SDA",	/* GPIO_55  */
+		"APPS_I2C7_SCL",	/* GPIO_56  */
+		"FORCE_USB_BOOT",	/* GPIO_57  */
+		"SPKR_I2S_BCK",		/* GPIO_58  */
+		"SPKR_I2S_WS",		/* GPIO_59  */
+		"SPKR_I2S_DOUT",	/* GPIO_60  */
+		"SPKR_I2S_DIN",		/* GPIO_61  */
+		"ESE_RSTN",		/* GPIO_62  */
+		"TYPEC_INT",		/* GPIO_63  */
+		"CODEC_RESET_N",	/* GPIO_64  */
+		"PCM_CLK",		/* GPIO_65  */
+		"PCM_SYNC",		/* GPIO_66  */
+		"PCM_DIN",		/* GPIO_67  */
+		"PCM_DOUT",		/* GPIO_68  */
+		"HIFI_CLK",		/* GPIO_69  */
+		"SLIMBUS_CLK",		/* GPIO_70  */
+		"SLIMBUS_DATA0",	/* GPIO_71  */
+		"SLIMBUS_DATA1",	/* GPIO_72  */
+		"LDO_5V_IN_EN",		/* GPIO_73  */
+		"NC",			/* GPIO_74  */
+		"FM_I2S_CLK",		/* GPIO_75  */
+		"FM_I2S_SYNC",		/* GPIO_76  */
+		"FM_I2S_DATA",		/* GPIO_77  */
+		"FM_STATUS",		/* GPIO_78  */
+		"NC",			/* GPIO_79  */
+		"SENSOR_RESET_N",	/* GPIO_80  */
+		"FP_SPI_MOSI",		/* GPIO_81  */
+		"FP_SPI_MISO",		/* GPIO_82  */
+		"FP_SPI_CS_N",		/* GPIO_83  */
+		"FP_SPI_CLK",		/* GPIO_84  */
+		"NC",			/* GPIO_85  */
+		"CAM_VDD_1P05_EN",	/* GPIO_86  */
+		"MSM_TS_I2C_SDA",	/* GPIO_87  */
+		"MSM_TS_I2C_SCL",	/* GPIO_88  */
+		"TS_RESOUT_N",		/* GPIO_89  */
+		"ESE_SPI_CS_N",		/* GPIO_90  */
+		"NC",			/* GPIO_91  */
+		"NC",			/* GPIO_92  */
+		"HAPTICS_EN",		/* GPIO_93  */
+		"NC",			/* GPIO_94  */
+		"NC",			/* GPIO_95  */
+		"NC",			/* GPIO_96  */
+		"NC",			/* GPIO_97  */
+		"GRFC_1",		/* GPIO_98  */
+		"NC",			/* GPIO_99  */
+		"GRFC_3",		/* GPIO_100 */
+		"GRFC_4",		/* GPIO_101 */
+		"NC",			/* GPIO_102 */
+		"NC",			/* GPIO_103 */
+		"GRFC_7",		/* GPIO_104 */
+		"UIM2_DATA",		/* GPIO_105 */
+		"UIM2_CLK",		/* GPIO_106 */
+		"UIM2_RESET",		/* GPIO_107 */
+		"UIM2_PRESENT",		/* GPIO_108 */
+		"UIM1_DATA",		/* GPIO_109 */
+		"UIM1_CLK",		/* GPIO_110 */
+		"UIM1_RESET",		/* GPIO_111 */
+		"UIM1_PRESENT",		/* GPIO_112 */
+		"UIM_BATT_ALARM",	/* GPIO_113 */
+		"GRFC_8",		/* GPIO_114 */
+		"GRFC_9",		/* GPIO_115 */
+		"TX_GTR_THRES",		/* GPIO_116 */
+		"ACCEL_INT",		/* GPIO_117 */
+		"GYRO_INT",		/* GPIO_118 */
+		"COMPASS_INT",		/* GPIO_119 */
+		"PROXIMITY_INT_N",	/* GPIO_120 */
+		"FP_IRQ",		/* GPIO_121 */
+		"NC",			/* GPIO_122 */
+		"HALL_INTR2",		/* GPIO_123 */
+		"HALL_INTR1",		/* GPIO_124 */
+		"TS_INT_N",		/* GPIO_125 */
+		"NC",			/* GPIO_126 */
+		"GRFC_11",		/* GPIO_127 */
+		"NC",			/* GPIO_128 */
+		"EXT_GPS_LNA_EN",	/* GPIO_129 */
+		"NC",			/* GPIO_130 */
+		"NC",			/* GPIO_131 */
+		"NC",			/* GPIO_132 */
+		"GRFC_14",		/* GPIO_133 */
+		"GSM_TX2_PHASE_D",	/* GPIO_134 */
+		"NC",			/* GPIO_135 */
+		"NC",			/* GPIO_136 */
+		"RFFE3_DATA",		/* GPIO_137 */
+		"RFFE3_CLK",		/* GPIO_138 */
+		"NC",			/* GPIO_139 */
+		"NC",			/* GPIO_140 */
+		"RFFE5_DATA",		/* GPIO_141 */
+		"RFFE5_CLK",		/* GPIO_142 */
+		"NC",			/* GPIO_143 */
+		"COEX_UART_TX",		/* GPIO_144 */
+		"COEX_UART_RX",		/* GPIO_145 */
+		"RFFE2_DATA",		/* GPIO_146 */
+		"RFFE2_CLK",		/* GPIO_147 */
+		"RFFE1_DATA",		/* GPIO_148 */
+		"RFFE1_CLK";		/* GPIO_149 */
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+
+	touchscreen_sleep: touchscreen-sleep-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	vibrator_default: vibrator-default-state {
+		pins = "gpio93";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	vibrator_sleep: vibrator-sleep-state {
+		pins = "gpio93";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
new file mode 100644
index 0000000000..c8e0986425
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -0,0 +1,3883 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8996.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8996.h>
+#include <dt-bindings/interconnect/qcom,msm8996-cbf.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&kryocc 0>;
+			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&kryocc 0>;
+			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&kryocc 1>;
+			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&kryocc 1>;
+			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <130>;
+				exit-latency-us = <80>;
+				min-residency-us = <300>;
+			};
+		};
+	};
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		/* Nominal fmax for now */
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <384000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <460800>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <537600>;
+		};
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <672000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <672000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <825600>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <825600>;
+		};
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <902400>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-supported-hw = <0xd>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1056000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x2>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1132800>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-supported-hw = <0xd>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1132800>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-supported-hw = <0x9>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1190400>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-supported-hw = <0x04>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1305600>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x9>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1382400>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		/* Nominal fmax for now */
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <384000>;
+		};
+		opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <460800>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <537600>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <595200>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <672000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <672000>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <748800>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <825600>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <902400>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <979200>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1056000>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1190400>;
+		};
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1228800>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1305600>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-supported-hw = <0xe>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1305600>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1382400>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x4>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1305600>;
+		};
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1459200>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8996", "qcom,scm";
+			qcom,dload-mode = <&tcsr_2 0x13000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8996";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8996-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp1: opp1 {
+							opp-level = <1>;
+						};
+
+						rpmpd_opp2: opp2 {
+							opp-level = <2>;
+						};
+
+						rpmpd_opp3: opp3 {
+							opp-level = <3>;
+						};
+
+						rpmpd_opp4: opp4 {
+							opp-level = <4>;
+						};
+
+						rpmpd_opp5: opp5 {
+							opp-level = <5>;
+						};
+
+						rpmpd_opp6: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x200000>;
+			no-map;
+		};
+
+		smem_mem: smem-mem@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x2600000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs {
+			compatible = "qcom,rmtfs-mem";
+
+			size = <0x0 0x200000>;
+			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		mpss_mem: mpss@88800000 {
+			reg = <0x0 0x88800000 0x0 0x6200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8ea00000 {
+			reg = <0x0 0x8ea00000 0x0 0x1b00000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@90500000 {
+			reg = <0x0 0x90500000 0x0 0xa00000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@90f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x90f00000 0x0 0x100000>;
+			no-map;
+		};
+
+		venus_mem: venus@91000000 {
+			reg = <0x0 0x91000000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: mba@91500000 {
+			reg = <0x0 0x91500000 0x0 0x200000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		mpss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		mpss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		pcie_phy: phy-wrapper@34000 {
+			compatible = "qcom,msm8996-qmp-pcie-phy";
+			reg = <0x00034000 0x488>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00034000 0x4000>;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+				<&gcc GCC_PCIE_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+			reset-names = "phy", "common", "cfg";
+
+			status = "disabled";
+
+			pciephy_0: phy@1000 {
+				reg = <0x1000 0x130>,
+				      <0x1200 0x200>,
+				      <0x1400 0x1dc>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+				reset-names = "lane0";
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk_src";
+
+				#phy-cells = <0>;
+			};
+
+			pciephy_1: phy@2000 {
+				reg = <0x2000 0x130>,
+				      <0x2200 0x200>,
+				      <0x2400 0x1dc>;
+
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe1";
+				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+				reset-names = "lane1";
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk_src";
+
+				#phy-cells = <0>;
+			};
+
+			pciephy_2: phy@3000 {
+				reg = <0x3000 0x130>,
+				      <0x3200 0x200>,
+				      <0x3400 0x1dc>;
+
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+				clock-names = "pipe2";
+				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+				reset-names = "lane2";
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_2_pipe_clk_src";
+
+				#phy-cells = <0>;
+			};
+		};
+
+		rpm_msg_ram: sram@68000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00068000 0x6000>;
+		};
+
+		qfprom@74000 {
+			compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
+			reg = <0x00074000 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx_trim@24e {
+				reg = <0x24e 0x2>;
+				bits = <5 4>;
+			};
+
+			qusb2s_hstx_trim: hstx_trim@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 4>;
+			};
+
+			speedbin_efuse: speedbin@133 {
+				reg = <0x133 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		rng: rng@83000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x00083000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		gcc: clock-controller@300000 {
+			compatible = "qcom,gcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00300000 0x90000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&sleep_clk>,
+				 <&pciephy_0>,
+				 <&pciephy_1>,
+				 <&pciephy_2>,
+				 <&ssusb_phy_0>,
+				 <&ufsphy_lane 0>,
+				 <&ufsphy_lane 1>,
+				 <&ufsphy_lane 2>;
+			clock-names = "cxo",
+				      "cxo2",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk_src",
+				      "pcie_1_pipe_clk_src",
+				      "pcie_2_pipe_clk_src",
+				      "usb3_phy_pipe_clk_src",
+				      "ufs_rx_symbol_0_clk_src",
+				      "ufs_rx_symbol_1_clk_src",
+				      "ufs_tx_symbol_0_clk_src";
+		};
+
+		bimc: interconnect@408000 {
+			compatible = "qcom,msm8996-bimc";
+			reg = <0x00408000 0x5a000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		tsens0: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@4ad000 {
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
+			reg = <0x004ad000 0x1000>, /* TM */
+			      <0x004ac000 0x1000>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		cryptobam: dma-controller@644000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x00644000 0x24000>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CE1_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@67a000 {
+			compatible = "qcom,crypto-v5.4";
+			reg = <0x0067a000 0x6000>;
+			clocks = <&gcc GCC_CE1_AHB_CLK>,
+				 <&gcc GCC_CE1_AXI_CLK>,
+				 <&gcc GCC_CE1_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+		};
+
+		cnoc: interconnect@500000 {
+			compatible = "qcom,msm8996-cnoc";
+			reg = <0x00500000 0x1000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
+		snoc: interconnect@524000 {
+			compatible = "qcom,msm8996-snoc";
+			reg = <0x00524000 0x1c000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		a0noc: interconnect@543000 {
+			compatible = "qcom,msm8996-a0noc";
+			reg = <0x00543000 0x6000>;
+			#interconnect-cells = <1>;
+			clock-names = "aggre0_snoc_axi",
+				      "aggre0_cnoc_ahb",
+				      "aggre0_noc_mpu_cfg";
+			clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE0_CNOC_AHB_CLK>,
+				 <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>;
+			power-domains = <&gcc AGGRE0_NOC_GDSC>;
+		};
+
+		a1noc: interconnect@562000 {
+			compatible = "qcom,msm8996-a1noc";
+			reg = <0x00562000 0x5000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
+				 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
+		};
+
+		a2noc: interconnect@583000 {
+			compatible = "qcom,msm8996-a2noc";
+			reg = <0x00583000 0x7000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
+			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				 <&gcc GCC_UFS_AXI_CLK>;
+		};
+
+		mnoc: interconnect@5a4000 {
+			compatible = "qcom,msm8996-mnoc";
+			reg = <0x005a4000 0x1c000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a", "iface";
+			clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
+				 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
+				 <&mmcc AHB_CLK_SRC>;
+		};
+
+		pnoc: interconnect@5c0000 {
+			compatible = "qcom,msm8996-pnoc";
+			reg = <0x005c0000 0x3000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+		};
+
+		tcsr_mutex: hwlock@740000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x00740000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_1: syscon@760000 {
+			compatible = "qcom,tcsr-msm8996", "syscon";
+			reg = <0x00760000 0x20000>;
+		};
+
+		tcsr_2: syscon@7a0000 {
+			compatible = "qcom,tcsr-msm8996", "syscon";
+			reg = <0x007a0000 0x18000>;
+		};
+
+		mmcc: clock-controller@8c0000 {
+			compatible = "qcom,mmcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x008c0000 0x40000>;
+			clocks = <&xo_board>,
+				 <&gcc GPLL0>,
+				 <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_hdmi_phy>;
+			clock-names = "xo",
+				      "gpll0",
+				      "gcc_mmss_noc_cfg_ahb_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "hdmipll";
+			assigned-clocks = <&mmcc MMPLL9_PLL>,
+					  <&mmcc MMPLL1_PLL>,
+					  <&mmcc MMPLL3_PLL>,
+					  <&mmcc MMPLL4_PLL>,
+					  <&mmcc MMPLL5_PLL>;
+			assigned-clock-rates = <624000000>,
+					       <810000000>,
+					       <980000000>,
+					       <960000000>,
+					       <825000000>;
+		};
+
+		mdss: display-subsystem@900000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x00900000 0x1000>,
+			      <0x009b0000 0x1040>,
+			      <0x009b8000 0x1040>;
+			reg-names = "mdss_phys",
+				    "vbif_phys",
+				    "vbif_nrt_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@901000 {
+				compatible = "qcom,msm8996-mdp5", "qcom,mdp5";
+				reg = <0x00901000 0x90000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc SMMU_MDP_AXI_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "iommu",
+					      "vsync";
+
+				iommus = <&mdp_smmu 0>;
+
+				assigned-clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <300000000>,
+					 <19200000>;
+
+				interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
+						<&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>,
+						<&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>;
+				interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf3_out: endpoint {
+							remote-endpoint = <&mdss_hdmi_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@994000 {
+				compatible = "qcom,msm8996-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x00994000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "byte",
+					      "iface",
+					      "bus",
+					      "core_mmss",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				phys = <&mdss_dsi0_phy>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@994400 {
+				compatible = "qcom,dsi-phy-14nm";
+				reg = <0x00994400 0x100>,
+				      <0x00994500 0x300>,
+				      <0x00994800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@996000 {
+				compatible = "qcom,msm8996-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x00996000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_BYTE1_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>,
+					 <&mmcc MDSS_PCLK1_CLK>,
+					 <&mmcc MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "byte",
+					      "iface",
+					      "bus",
+					      "core_mmss",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				phys = <&mdss_dsi1_phy>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@996400 {
+				compatible = "qcom,dsi-phy-14nm";
+				reg = <0x00996400 0x100>,
+				      <0x00996500 0x300>,
+				      <0x00996800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+				status = "disabled";
+			};
+
+			mdss_hdmi: hdmi-tx@9a0000 {
+				compatible = "qcom,hdmi-tx-8996";
+				reg = <0x009a0000 0x50c>,
+				      <0x00070000 0x6158>,
+				      <0x009e0000 0xfff>;
+				reg-names = "core_physical",
+					    "qfprom_physical",
+					    "hdcp_physical";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <8>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_HDMI_CLK>,
+					 <&mmcc MDSS_HDMI_AHB_CLK>,
+					 <&mmcc MDSS_EXTPCLK_CLK>;
+				clock-names =
+					"mdp_core",
+					"iface",
+					"core",
+					"alt_iface",
+					"extp";
+
+				phys = <&mdss_hdmi_phy>;
+				#sound-dai-cells = <1>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_hdmi_in: endpoint {
+							remote-endpoint = <&mdp5_intf3_out>;
+						};
+					};
+				};
+			};
+
+			mdss_hdmi_phy: phy@9a0600 {
+				#phy-cells = <0>;
+				compatible = "qcom,hdmi-phy-8996";
+				reg = <0x009a0600 0x1c4>,
+				      <0x009a0a00 0x124>,
+				      <0x009a0c00 0x124>,
+				      <0x009a0e00 0x124>,
+				      <0x009a1000 0x124>,
+				      <0x009a1200 0x0c8>;
+				reg-names = "hdmi_pll",
+					    "hdmi_tx_l0",
+					    "hdmi_tx_l1",
+					    "hdmi_tx_l2",
+					    "hdmi_tx_l3",
+					    "hdmi_phy";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&gcc GCC_HDMI_CLKREF_CLK>,
+					 <&xo_board>;
+				clock-names = "iface",
+					      "ref",
+					      "xo";
+
+				#clock-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpu: gpu@b00000 {
+			compatible = "qcom,adreno-530.2", "qcom,adreno";
+
+			reg = <0x00b00000 0x3f000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mmcc GPU_GX_GFX3D_CLK>,
+				<&mmcc GPU_AHB_CLK>,
+				<&mmcc GPU_GX_RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_MMSS_BIMC_GFX_CLK>;
+
+			clock-names = "core",
+				"iface",
+				"rbbmtimer",
+				"mem",
+				"mem_iface";
+
+			interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>;
+			interconnect-names = "gfx-mem";
+
+			power-domains = <&mmcc GPU_GX_GDSC>;
+			iommus = <&adreno_smmu 0>;
+
+			nvmem-cells = <&speedbin_efuse>;
+			nvmem-cell-names = "speed_bin";
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			#cooling-cells = <2>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/*
+				 * 624Mhz is only available on speed bins 0 and 3.
+				 * 560Mhz is only available on speed bins 0, 2 and 3.
+				 * All the rest are available on all bins of the hardware.
+				 */
+				opp-624000000 {
+					opp-hz = /bits/ 64 <624000000>;
+					opp-supported-hw = <0x09>;
+				};
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					opp-supported-hw = <0x0d>;
+				};
+				opp-510000000 {
+					opp-hz = /bits/ 64 <510000000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-401800000 {
+					opp-hz = /bits/ 64 <401800000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-214000000 {
+					opp-hz = /bits/ 64 <214000000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-133000000 {
+					opp-hz = /bits/ 64 <133000000>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+		};
+
+		tlmm: pinctrl@1010000 {
+			compatible = "qcom,msm8996-pinctrl";
+			reg = <0x01010000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 150>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp1_spi1_sleep: blsp1-spi1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart2_2pins_default: blsp2-uart2-2pins-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart8";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_default: blsp2-i2c2-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c8";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_default: blsp1-i2c6-state {
+				pins = "gpio27", "gpio28";
+				function = "blsp_i2c6";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio27", "gpio28";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			camera0_state_on:
+			camera_rear_default: camera-rear-default-state {
+				camera0_mclk: mclk0-pins {
+					pins = "gpio13";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				camera0_rst: rst-pins {
+					pins = "gpio25";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				camera0_pwdn: pwdn-pins {
+					pins = "gpio26";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			camera1_state_on:
+			camera_board_default: camera-board-default-state {
+				mclk1-pins {
+					pins = "gpio14";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				pwdn-pins {
+					pins = "gpio98";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				rst-pins {
+					pins = "gpio104";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			camera2_state_on:
+			camera_front_default: camera-front-default-state {
+				camera2_mclk: mclk2-pins {
+					pins = "gpio15";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				camera2_rst: rst-pins {
+					pins = "gpio23";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				pwdn-pins {
+					pins = "gpio133";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			pcie0_state_on: pcie0-state-on-state {
+				perst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio36";
+					function = "pci_e0";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio37";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie0_state_off: pcie0-state-off-state {
+				perst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio36";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				wake-pins {
+					pins = "gpio37";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c3";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio47", "gpio48";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart3_4pins_default: blsp2-uart3-4pins-state {
+				pins = "gpio49", "gpio50", "gpio51", "gpio52";
+				function = "blsp_uart9";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state {
+				pins = "gpio49", "gpio50", "gpio51", "gpio52";
+				function = "blsp_uart9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c3_default: blsp2-i2c3-state-state {
+				pins = "gpio51", "gpio52";
+				function = "blsp_i2c9";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
+				pins = "gpio51", "gpio52";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			wcd_intr_default: wcd-intr-default-state {
+				pins = "gpio54";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_i2c1_default: blsp2-i2c1-state {
+				pins = "gpio55", "gpio56";
+				function = "blsp_i2c7";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio55", "gpio56";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c5_default: blsp2-i2c5-state {
+				pins = "gpio60", "gpio61";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			/* Sleep state for BLSP2_I2C5 is missing.. */
+
+			cdc_reset_active: cdc-reset-active-state {
+				pins = "gpio64";
+				function = "gpio";
+				drive-strength = <16>;
+				bias-pull-down;
+				output-high;
+			};
+
+			cdc_reset_sleep: cdc-reset-sleep-state {
+				pins = "gpio64";
+				function = "gpio";
+				drive-strength = <16>;
+				bias-disable;
+				output-low;
+			};
+
+			blsp2_spi6_default: blsp2-spi6-default-state {
+				spi-pins {
+					pins = "gpio85", "gpio86", "gpio88";
+					function = "blsp_spi12";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio87";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp2_spi6_sleep: blsp2-spi6-sleep-state {
+				pins = "gpio85", "gpio86", "gpio87", "gpio88";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_i2c6_default: blsp2-i2c6-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
+				pins = "gpio87", "gpio88";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pcie1_state_on: pcie1-on-state {
+				perst-pins {
+					pins = "gpio130";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio131";
+					function = "pci_e1";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio132";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			pcie1_state_off: pcie1-off-state {
+				/* Perst is missing? */
+				clkreq-pins {
+					pins = "gpio131";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				wake-pins {
+					pins = "gpio132";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			pcie2_state_on: pcie2-on-state {
+				perst-pins {
+					pins = "gpio114";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio115";
+					function = "pci_e2";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio116";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			pcie2_state_off: pcie2-off-state {
+				/* Perst is missing? */
+				clkreq-pins {
+					pins = "gpio115";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				wake-pins {
+					pins = "gpio116";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		sram@290000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		spmi_bus: spmi@400f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0400f000 0x1000>,
+			      <0x04400000 0x800000>,
+			      <0x04c00000 0x800000>,
+			      <0x05800000 0x200000>,
+			      <0x0400a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bus@0 {
+			power-domains = <&gcc AGGRE0_NOC_GDSC>;
+			compatible = "simple-pm-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xffffffff>;
+
+			pcie0: pcie@600000 {
+				compatible = "qcom,pcie-msm8996";
+				status = "disabled";
+				power-domains = <&gcc PCIE0_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				reg = <0x00600000 0x2000>,
+				      <0x0c000000 0xf1d>,
+				      <0x0c000f20 0xa8>,
+				      <0x0c100000 0x100000>;
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_0>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie0_state_on>;
+				pinctrl-1 = <&pcie0_state_off>;
+
+				linux,pci-domain = <0>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+					<&gcc GCC_PCIE_0_AUX_CLK>,
+					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+
+				clock-names = "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+
+			pcie1: pcie@608000 {
+				compatible = "qcom,pcie-msm8996";
+				power-domains = <&gcc PCIE1_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				status = "disabled";
+
+				reg = <0x00608000 0x2000>,
+				      <0x0d000000 0xf1d>,
+				      <0x0d000f20 0xa8>,
+				      <0x0d100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_1>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie1_state_on>;
+				pinctrl-1 = <&pcie1_state_off>;
+
+				linux,pci-domain = <1>;
+
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+					<&gcc GCC_PCIE_1_AUX_CLK>,
+					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+
+				clock-names = "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+
+			pcie2: pcie@610000 {
+				compatible = "qcom,pcie-msm8996";
+				power-domains = <&gcc PCIE2_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+				status = "disabled";
+				reg = <0x00610000 0x2000>,
+				      <0x0e000000 0xf1d>,
+				      <0x0e000f20 0xa8>,
+				      <0x0e100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_2>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie2_state_on>;
+				pinctrl-1 = <&pcie2_state_off>;
+
+				linux,pci-domain = <2>;
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+					<&gcc GCC_PCIE_2_AUX_CLK>,
+					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+
+				clock-names = "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+		};
+
+		ufshc: ufshc@624000 {
+			compatible = "qcom,msm8996-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x00624000 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			phys = <&ufsphy_lane>;
+			phy-names = "ufsphy";
+
+			power-domains = <&gcc UFS_GDSC>;
+
+			clock-names =
+				"core_clk_src",
+				"core_clk",
+				"bus_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro_src",
+				"core_clk_unipro",
+				"core_clk_ice",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk";
+			clocks =
+				<&gcc UFS_AXI_CLK_SRC>,
+				<&gcc GCC_UFS_AXI_CLK>,
+				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
+				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				<&gcc GCC_UFS_AHB_CLK>,
+				<&gcc UFS_ICE_CORE_CLK_SRC>,
+				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+				<&gcc GCC_UFS_ICE_CORE_CLK>,
+				<&rpmcc RPM_SMD_LN_BB_CLK>,
+				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
+			freq-table-hz =
+				<100000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<150000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>,
+					<&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		ufsphy: phy@627000 {
+			compatible = "qcom,msm8996-qmp-ufs-phy";
+			reg = <0x00627000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref";
+
+			resets = <&ufshc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufsphy_lane: phy@627400 {
+				reg = <0x627400 0x12c>,
+				      <0x627600 0x200>,
+				      <0x627c00 0x1b4>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		camss: camss@a34000 {
+			compatible = "qcom,msm8996-camss";
+			reg = <0x00a34000 0x1000>,
+			      <0x00a00030 0x4>,
+			      <0x00a35000 0x1000>,
+			      <0x00a00038 0x4>,
+			      <0x00a36000 0x1000>,
+			      <0x00a00040 0x4>,
+			      <0x00a30000 0x100>,
+			      <0x00a30400 0x100>,
+			      <0x00a30800 0x100>,
+			      <0x00a30c00 0x100>,
+			      <0x00a31000 0x500>,
+			      <0x00a00020 0x10>,
+			      <0x00a10000 0x1000>,
+			      <0x00a14000 0x1000>;
+			reg-names = "csiphy0",
+				"csiphy0_clk_mux",
+				"csiphy1",
+				"csiphy1_clk_mux",
+				"csiphy2",
+				"csiphy2_clk_mux",
+				"csid0",
+				"csid1",
+				"csid2",
+				"csid3",
+				"ispif",
+				"csi_clk_mux",
+				"vfe0",
+				"vfe1";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csid0",
+				"csid1",
+				"csid2",
+				"csid3",
+				"ispif",
+				"vfe0",
+				"vfe1";
+			power-domains = <&mmcc VFE0_GDSC>,
+					<&mmcc VFE1_GDSC>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				<&mmcc CAMSS_ISPIF_AHB_CLK>,
+				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI0_AHB_CLK>,
+				<&mmcc CAMSS_CSI0_CLK>,
+				<&mmcc CAMSS_CSI0PHY_CLK>,
+				<&mmcc CAMSS_CSI0PIX_CLK>,
+				<&mmcc CAMSS_CSI0RDI_CLK>,
+				<&mmcc CAMSS_CSI1_AHB_CLK>,
+				<&mmcc CAMSS_CSI1_CLK>,
+				<&mmcc CAMSS_CSI1PHY_CLK>,
+				<&mmcc CAMSS_CSI1PIX_CLK>,
+				<&mmcc CAMSS_CSI1RDI_CLK>,
+				<&mmcc CAMSS_CSI2_AHB_CLK>,
+				<&mmcc CAMSS_CSI2_CLK>,
+				<&mmcc CAMSS_CSI2PHY_CLK>,
+				<&mmcc CAMSS_CSI2PIX_CLK>,
+				<&mmcc CAMSS_CSI2RDI_CLK>,
+				<&mmcc CAMSS_CSI3_AHB_CLK>,
+				<&mmcc CAMSS_CSI3_CLK>,
+				<&mmcc CAMSS_CSI3PHY_CLK>,
+				<&mmcc CAMSS_CSI3PIX_CLK>,
+				<&mmcc CAMSS_CSI3RDI_CLK>,
+				<&mmcc CAMSS_AHB_CLK>,
+				<&mmcc CAMSS_VFE0_CLK>,
+				<&mmcc CAMSS_CSI_VFE0_CLK>,
+				<&mmcc CAMSS_VFE0_AHB_CLK>,
+				<&mmcc CAMSS_VFE0_STREAM_CLK>,
+				<&mmcc CAMSS_VFE1_CLK>,
+				<&mmcc CAMSS_CSI_VFE1_CLK>,
+				<&mmcc CAMSS_VFE1_AHB_CLK>,
+				<&mmcc CAMSS_VFE1_STREAM_CLK>,
+				<&mmcc CAMSS_VFE_AHB_CLK>,
+				<&mmcc CAMSS_VFE_AXI_CLK>;
+			clock-names = "top_ahb",
+				"ispif_ahb",
+				"csiphy0_timer",
+				"csiphy1_timer",
+				"csiphy2_timer",
+				"csi0_ahb",
+				"csi0",
+				"csi0_phy",
+				"csi0_pix",
+				"csi0_rdi",
+				"csi1_ahb",
+				"csi1",
+				"csi1_phy",
+				"csi1_pix",
+				"csi1_rdi",
+				"csi2_ahb",
+				"csi2",
+				"csi2_phy",
+				"csi2_pix",
+				"csi2_rdi",
+				"csi3_ahb",
+				"csi3",
+				"csi3_phy",
+				"csi3_pix",
+				"csi3_rdi",
+				"ahb",
+				"vfe0",
+				"csi_vfe0",
+				"vfe0_ahb",
+				"vfe0_stream",
+				"vfe1",
+				"csi_vfe1",
+				"vfe1_ahb",
+				"vfe1_stream",
+				"vfe_ahb",
+				"vfe_axi";
+			iommus = <&vfe_smmu 0>,
+				 <&vfe_smmu 1>,
+				 <&vfe_smmu 2>,
+				 <&vfe_smmu 3>;
+			status = "disabled";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci: cci@a0c000 {
+			compatible = "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xa0c000 0x1000>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&mmcc CAMSS_GDSC>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CLK>,
+				 <&mmcc CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci",
+				      "camss_ahb";
+			assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
+					  <&mmcc CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		adreno_smmu: iommu@b40000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0x00b40000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>,
+				 <&mmcc GPU_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&mmcc GPU_GDSC>;
+		};
+
+		venus: video-codec@c00000 {
+			compatible = "qcom,msm8996-venus";
+			reg = <0x00c00000 0xff000>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc VENUS_GDSC>;
+			clocks = <&mmcc VIDEO_CORE_CLK>,
+				 <&mmcc VIDEO_AHB_CLK>,
+				 <&mmcc VIDEO_AXI_CLK>,
+				 <&mmcc VIDEO_MAXI_CLK>;
+			clock-names = "core", "iface", "bus", "mbus";
+			interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>,
+					<&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>;
+			interconnect-names = "video-mem", "cpu-cfg";
+			iommus = <&venus_smmu 0x00>,
+				 <&venus_smmu 0x01>,
+				 <&venus_smmu 0x0a>,
+				 <&venus_smmu 0x07>,
+				 <&venus_smmu 0x0e>,
+				 <&venus_smmu 0x0f>,
+				 <&venus_smmu 0x08>,
+				 <&venus_smmu 0x09>,
+				 <&venus_smmu 0x0b>,
+				 <&venus_smmu 0x0c>,
+				 <&venus_smmu 0x0d>,
+				 <&venus_smmu 0x10>,
+				 <&venus_smmu 0x11>,
+				 <&venus_smmu 0x21>,
+				 <&venus_smmu 0x28>,
+				 <&venus_smmu 0x29>,
+				 <&venus_smmu 0x2b>,
+				 <&venus_smmu 0x2c>,
+				 <&venus_smmu 0x2d>,
+				 <&venus_smmu 0x31>;
+			memory-region = <&venus_mem>;
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VENUS_CORE1_GDSC>;
+			};
+		};
+
+		mdp_smmu: iommu@d00000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00d00000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			clocks = <&mmcc SMMU_MDP_AXI_CLK>,
+				 <&mmcc SMMU_MDP_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+
+		venus_smmu: iommu@d40000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00d40000 0x20000>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
+			clocks = <&mmcc SMMU_VIDEO_AXI_CLK>,
+				 <&mmcc SMMU_VIDEO_AHB_CLK>;
+			clock-names = "bus", "iface";
+			#iommu-cells = <1>;
+			status = "okay";
+		};
+
+		vfe_smmu: iommu@da0000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00da0000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+			clocks = <&mmcc SMMU_VFE_AXI_CLK>,
+				 <&mmcc SMMU_VFE_AHB_CLK>;
+			clock-names = "bus", "iface";
+			#iommu-cells = <1>;
+		};
+
+		lpass_q6_smmu: iommu@1600000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x01600000 0x20000>;
+			#iommu-cells = <1>;
+			power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>,
+				 <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>;
+			clock-names = "bus", "iface";
+		};
+
+		slpi_pil: remoteproc@1c00000 {
+			compatible = "qcom,msm8996-slpi-pil";
+			reg = <0x01c00000 0x4000>;
+
+			interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&xo_board>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "xo", "aggre2";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8996_VDDSSCX>;
+			power-domain-names = "ssc_cx";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+
+				label = "dsps";
+				mboxes = <&apcs_glb 25>;
+				qcom,smd-edge = <3>;
+				qcom,remote-pid = <3>;
+			};
+		};
+
+		mss_pil: remoteproc@2080000 {
+			compatible = "qcom,msm8996-mss-pil";
+			reg = <0x2080000 0x100>,
+			      <0x2180000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
+				      "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			power-domains = <&rpmpd MSM8996_VDDCX>,
+					<&rpmpd MSM8996_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&mpss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			metadata {
+				memory-region = <&mdata_mem>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+
+				label = "mpss";
+				mboxes = <&apcs_glb 12>;
+				qcom,smd-edge = <0>;
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		stm@3002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x3002000 0x1000>,
+			      <0x8280000 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint =
+						  <&funnel0_in>;
+					};
+				};
+			};
+		};
+
+		tpiu@3020000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x3020000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@3021000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3021000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in: endpoint {
+						remote-endpoint =
+						  <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@3022000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3022000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel1_in: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@3023000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3023000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+
+			out-ports {
+				port {
+					funnel2_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		funnel@3025000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3025000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&funnel1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					merge_funnel_in2: endpoint {
+						remote-endpoint =
+						  <&funnel2_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator@3026000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x3026000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint =
+						  <&etf_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint =
+						  <&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint =
+						  <&tpiu_in>;
+					};
+				};
+			};
+		};
+
+		etf@3027000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x3027000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint =
+						  <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etr@3028000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x3028000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		debug@3810000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x3810000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+		};
+
+		etm@3840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x3840000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel0_in0>;
+					};
+				};
+			};
+		};
+
+		debug@3910000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x3910000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+		};
+
+		etm@3940000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x3940000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel0_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@39b0000 { /* APSS Funnel 0 */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x39b0000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel0_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel0_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel0_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		debug@3a10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x3a10000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+		};
+
+		etm@3a40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x3a40000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		debug@3b10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x3b10000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+		};
+
+		etm@3b40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x3b40000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel1_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@3bb0000 { /* APSS Funnel 1 */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3bb0000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel1_in0: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel1_in1: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel1_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@3bc0000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3bc0000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&apss_funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_merge_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&apss_funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&funnel1_in>;
+					};
+				};
+			};
+		};
+
+		kryocc: clock-controller@6400000 {
+			compatible = "qcom,msm8996-apcc";
+			reg = <0x06400000 0x90000>;
+
+			clock-names = "xo", "sys_apcs_aux";
+			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
+
+			#clock-cells = <1>;
+		};
+
+		usb3: usb@6af8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x06af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>,
+					<&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			power-domains = <&gcc USB30_GDSC>;
+			status = "disabled";
+
+			usb3_dwc3: usb@6a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x06a00000 0xcc00>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,is-utmi-l1-suspend;
+				tx-fifo-resize;
+			};
+		};
+
+		usb3phy: phy@7410000 {
+			compatible = "qcom,msm8996-qmp-usb3-phy";
+			reg = <0x07410000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_USB3_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				<&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+			status = "disabled";
+
+			ssusb_phy_0: phy@7410200 {
+				reg = <0x07410200 0x200>,
+				      <0x07410400 0x130>,
+				      <0x07410600 0x1a8>;
+				#phy-cells = <0>;
+
+				#clock-cells = <0>;
+				clock-output-names = "usb3_phy_pipe_clk_src";
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+			};
+		};
+
+		hsusb_phy1: phy@7411000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x07411000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2p_hstx_trim>;
+			status = "disabled";
+		};
+
+		hsusb_phy2: phy@7412000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x07412000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+			nvmem-cells = <&qusb2s_hstx_trim>;
+			status = "disabled";
+		};
+
+		sdhc1: mmc@7464900 {
+			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07464900 0x11c>, <0x07464000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clock-names = "iface", "core", "xo";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				<&gcc GCC_SDCC1_APPS_CLK>,
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc2: mmc@74a4900 {
+			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clock-names = "iface", "core", "xo";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				<&gcc GCC_SDCC2_APPS_CLK>,
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_state_on>;
+			pinctrl-1 = <&sdc2_state_off>;
+
+			bus-width = <4>;
+			status = "disabled";
+		 };
+
+		blsp1_dma: dma-controller@7544000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07544000 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart2: serial@7570000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07570000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@7575000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07575000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_spi1_default>;
+			pinctrl-1 = <&blsp1_spi1_sleep>;
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@7577000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07577000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c6: i2c@757a000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x757a000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7584000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07584000 0x2b000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart2: serial@75b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x075b0000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_uart3: serial@75b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x075b1000 0x1000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@75b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b5000 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c2: i2c@75b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b6000 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c3: i2c@75b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b7000 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c3_default>;
+			pinctrl-1 = <&blsp2_i2c3_sleep>;
+			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c5: i2c@75b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x75b9000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_i2c5_default>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c6: i2c@75ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x75ba000 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
+			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi6: spi@75ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x075ba000 0x600>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_spi6_default>;
+			pinctrl-1 = <&blsp2_spi6_sleep>;
+			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2: usb@76f8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x076f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
+				<&gcc GCC_USB20_MASTER_CLK>,
+				<&gcc GCC_USB20_MOCK_UTMI_CLK>,
+				<&gcc GCC_USB20_SLEEP_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <60000000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb2_dwc3: usb@7600000 {
+				compatible = "snps,dwc3";
+				reg = <0x07600000 0xcc00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy2>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+			};
+		};
+
+		slimbam: dma-controller@9184000 {
+			compatible = "qcom,bam-v1.7.0";
+			qcom,controlled-remotely;
+			reg = <0x09184000 0x32000>;
+			num-channels = <31>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,num-ees = <2>;
+		};
+
+		slim_msm: slim-ngd@91c0000 {
+			compatible = "qcom,slim-ngd-v1.5.0";
+			reg = <0x091c0000 0x2c000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		adsp_pil: remoteproc@9300000 {
+			compatible = "qcom,msm8996-adsp-pil";
+			reg = <0x09300000 0x80000>;
+
+			interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8996_VDDCX>;
+			power-domain-names = "cx";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				label = "lpass";
+				mboxes = <&apcs_glb 8>;
+				qcom,smd-edge = <1>;
+				qcom,remote-pid = <2>;
+
+				apr {
+					power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							dai@1 {
+								reg = <1>;
+							};
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&lpass_q6_smmu 1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		apcs_glb: mailbox@9820000 {
+			compatible = "qcom,msm8996-apcs-hmss-global";
+			reg = <0x09820000 0x1000>;
+
+			#mbox-cells = <1>;
+			#clock-cells = <0>;
+		};
+
+		timer@9840000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x09840000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@9850000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09850000 0x1000>,
+				      <0x09860000 0x1000>;
+			};
+
+			frame@9870000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09870000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@9880000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09880000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@9890000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09890000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98a0000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098a0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98b0000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098b0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98c0000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098c0000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw3: syscon@9a10000 {
+			compatible = "syscon";
+			reg = <0x09a10000 0x1000>;
+		};
+
+		cbf: clock-controller@9a11000 {
+			compatible = "qcom,msm8996-cbf";
+			reg = <0x09a11000 0x10000>;
+			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
+			#clock-cells = <0>;
+			#interconnect-cells = <1>;
+		};
+
+		intc: interrupt-controller@9bc0000 {
+			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x09bc0000 0x10000>,
+			      <0x09c00000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		m4m-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				m4m_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		l3-or-venus-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				l3_or_venus_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cluster0_l2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster1-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cluster1_l2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				modemtx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
new file mode 100644
index 0000000000..5e3fd1637f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Alec Su <ae40515@yahoo.com.tw>
+ */
+
+/dts-v1/;
+
+#include "msm8996pro.dtsi"
+#include "msm8996-xiaomi-common.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+/ {
+	model = "Xiaomi Mi 5s Plus";
+	compatible = "xiaomi,natrium", "qcom,msm8996pro", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,msm-id = <305 0x10000>;
+	qcom,board-id = <47 0>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/natrium/adsp.mbn";
+};
+
+&blsp2_i2c6 {
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vdd_3v2_tp>;
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <5>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-1 = <&touchscreen_sleep>;
+	};
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
+	};
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdda-supply = <&vreg_l2a_1p25>;
+	vcca-supply = <&vreg_l28a_0p925>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
+	pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
+
+	panel: panel@0 {
+		compatible = "jdi,fhd-r63452";
+		reg = <0>;
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+		backlight = <&pmi8994_wled>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/natrium/mba.mbn",
+			"qcom/msm8996/natrium/modem.mbn";
+};
+
+&pmi8994_wled {
+	status = "okay";
+
+	qcom,enabled-strings = <0 1>;
+	qcom,switching-freq = <600>;
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/natrium/slpi.mbn";
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "natrium";
+	audio-routing = "RX_BIAS", "MCLK";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 6>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 1>;
+		};
+	};
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/natrium/venus.mbn";
+};
+
+&rpm_requests {
+	regulators-0 {
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <1300000>;
+		};
+		vreg_l11a_1p1: l11 {
+			regulator-name = "vreg_l11a_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l18a_2p8: l18 {
+			regulator-name = "vreg_l18a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"VOL_UP_N",		/* GPIO_2  */
+		"SPKR_ID",		/* GPIO_3  */
+		"PWM_HAPTICS",		/* GPIO_4  */
+		"INFARED_DRV",		/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"KEYPAD_LED_EN_A",	/* GPIO_7  */
+		"WL_EN",		/* GPIO_8  */
+		"3P3_ENABLE",		/* GPIO_9  */
+		"NC",			/* GPIO_10 */
+		"NC",			/* GPIO_11 */
+		"NC",			/* GPIO_12 */
+		"NC",			/* GPIO_13 */
+		"NC",			/* GPIO_14 */
+		"DIVCLK1_CDC",		/* GPIO_15 */
+		"DIVCLK2_HAPTICS",	/* GPIO_16 */
+		"NC",			/* GPIO_17 */
+		"32KHz_CLK_IN",		/* GPIO_18 */
+		"BT_EN",		/* GPIO_19 */
+		"PMIC_SLB",		/* GPIO_20 */
+		"UIM_BATT_ALARM",	/* GPIO_21 */
+		"NC";			/* GPIO_22 */
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"NC",			/* MPP_1 */
+		"CCI_TIMER1",		/* MPP_2 */
+		"PMIC_SLB",		/* MPP_3 */
+		"EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
+		"NC",			/* MPP_5 */
+		"NC",			/* MPP_6 */
+		"NC",			/* MPP_7 */
+		"NC";			/* MPP_8 */
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"SPKR_PA_EN",		/* GPIO_2  */
+		"NC",			/* GPIO_3  */
+		"NC",			/* GPIO_4  */
+		"NC",			/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"NC",			/* GPIO_7  */
+		"NC",			/* GPIO_8  */
+		"NC",			/* GPIO_9  */
+		"NC";			/* GPIO_10 */
+};
+
+&tlmm {
+	gpio-line-names =
+		"ESE_SPI_MOSI",		/* GPIO_0   */
+		"ESE_SPI_MISO",		/* GPIO_1   */
+		"NC",			/* GPIO_2   */
+		"ESE_SPI_CLK",		/* GPIO_3   */
+		"MSM_UART_TX",		/* GPIO_4   */
+		"MSM_UART_RX",		/* GPIO_5   */
+		"NFC_I2C_SDA",		/* GPIO_6   */
+		"NFC_I2C_SCL",		/* GPIO_7   */
+		"LCD0_RESET_N",		/* GPIO_8   */
+		"NFC_IRQ",		/* GPIO_9   */
+		"LCD_TE",		/* GPIO_10  */
+		"LCD_ID_DET1",		/* GPIO_11  */
+		"NFC_DISABLE",		/* GPIO_12  */
+		"CAM_MCLK0",		/* GPIO_13  */
+		"CAM_MCLK1",		/* GPIO_14  */
+		"CAM_MCLK2",		/* GPIO_15  */
+		"ESE_PWR_REQ",		/* GPIO_16  */
+		"CCI_I2C_SDA0",		/* GPIO_17  */
+		"CCI_I2C_SCL0",		/* GPIO_18  */
+		"CCI_I2C_SDA1",		/* GPIO_19  */
+		"CCI_I2C_SCL1",		/* GPIO_20  */
+		"NFC_DWL_REQ",		/* GPIO_21  */
+		"CCI_TIMER1",		/* GPIO_22  */
+		"WEBCAM1_RESET_N",	/* GPIO_23  */
+		"ESE_IRQ",		/* GPIO_24  */
+		"NC",			/* GPIO_25  */
+		"WEBCAM1_STANDBY",	/* GPIO_26  */
+		"NC",			/* GPIO_27  */
+		"NC",			/* GPIO_28  */
+		"NC",			/* GPIO_29  */
+		"CAM_VDD_1P2_EN_2",	/* GPIO_30  */
+		"CAM_RESET_0",		/* GPIO_31  */
+		"CAM_RESET_1",		/* GPIO_32  */
+		"NC",			/* GPIO_33  */
+		"NC",			/* GPIO_34  */
+		"PCI_E0_RST_N",		/* GPIO_35  */
+		"PCI_E0_CLKREQ_N",	/* GPIO_36  */
+		"PCI_E0_WAKE",		/* GPIO_37  */
+		"CHARGER_INT",		/* GPIO_38  */
+		"CHARGER_RESET",	/* GPIO_39  */
+		"NC",			/* GPIO_40  */
+		"QCA_UART_TXD",		/* GPIO_41  */
+		"QCA_UART_RXD",		/* GPIO_42  */
+		"QCA_UART_CTS",		/* GPIO_43  */
+		"QCA_UART_RTS",		/* GPIO_44  */
+		"MAWC_UART_TX",		/* GPIO_45  */
+		"MAWC_UART_RX",		/* GPIO_46  */
+		"NC",			/* GPIO_47  */
+		"NC",			/* GPIO_48  */
+		"NC",			/* GPIO_49  */
+		"FP_SPI_RST",		/* GPIO_50  */
+		"TYPEC_I2C_SDA",	/* GPIO_51  */
+		"TYPEC_I2C_SCL",	/* GPIO_52  */
+		"CODEC_INT2_N",		/* GPIO_53  */
+		"CODEC_INT1_N",		/* GPIO_54  */
+		"APPS_I2C7_SDA",	/* GPIO_55  */
+		"APPS_I2C7_SCL",	/* GPIO_56  */
+		"FORCE_USB_BOOT",	/* GPIO_57  */
+		"NC",			/* GPIO_58  */
+		"NC",			/* GPIO_59  */
+		"NC",			/* GPIO_60  */
+		"NC",			/* GPIO_61  */
+		"ESE_RSTN",		/* GPIO_62  */
+		"TYPEC_INT",		/* GPIO_63  */
+		"CODEC_RESET_N",	/* GPIO_64  */
+		"PCM_CLK",		/* GPIO_65  */
+		"PCM_SYNC",		/* GPIO_66  */
+		"PCM_DIN",		/* GPIO_67  */
+		"PCM_DOUT",		/* GPIO_68  */
+		"CDC_44K1_CLK",		/* GPIO_69  */
+		"SLIMBUS_CLK",		/* GPIO_70  */
+		"SLIMBUS_DATA0",	/* GPIO_71  */
+		"SLIMBUS_DATA1",	/* GPIO_72  */
+		"LDO_5V_IN_EN",		/* GPIO_73  */
+		"TYPEC_EN_N",		/* GPIO_74  */
+		"NC",			/* GPIO_75  */
+		"NC",			/* GPIO_76  */
+		"NC",			/* GPIO_77  */
+		"NC",			/* GPIO_78  */
+		"NC",			/* GPIO_79  */
+		"SENSOR_RESET_N",	/* GPIO_80  */
+		"FP_SPI_MOSI",		/* GPIO_81  */
+		"FP_SPI_MISO",		/* GPIO_82  */
+		"FP_SPI_CS_N",		/* GPIO_83  */
+		"FP_SPI_CLK",		/* GPIO_84  */
+		"NC",			/* GPIO_85  */
+		"CAM_VDD_1P2_EN",	/* GPIO_86  */
+		"MSM_TS_I2C_SDA",	/* GPIO_87  */
+		"MSM_TS_I2C_SCL",	/* GPIO_88  */
+		"TS_RESOUT_N",		/* GPIO_89  */
+		"ESE_SPI_CS_N",		/* GPIO_90  */
+		"NC",			/* GPIO_91  */
+		"CAM2_AVDD_EN",		/* GPIO_92  */
+		"CAM2_VCM_EN",		/* GPIO_93  */
+		"NC",			/* GPIO_94  */
+		"NC",			/* GPIO_95  */
+		"NC",			/* GPIO_96  */
+		"GRFC_0",		/* GPIO_97  */
+		"GRFC_1",		/* GPIO_98  */
+		"NC",			/* GPIO_99  */
+		"GRFC_3",		/* GPIO_100 */
+		"GRFC_4",		/* GPIO_101 */
+		"GRFC_5",		/* GPIO_102 */
+		"NC",			/* GPIO_103 */
+		"GRFC_7",		/* GPIO_104 */
+		"UIM2_DATA",		/* GPIO_105 */
+		"UIM2_CLK",		/* GPIO_106 */
+		"UIM2_RESET",		/* GPIO_107 */
+		"UIM2_PRESENT",		/* GPIO_108 */
+		"UIM1_DATA",		/* GPIO_109 */
+		"UIM1_CLK",		/* GPIO_110 */
+		"UIM1_RESET",		/* GPIO_111 */
+		"UIM1_PRESENT",		/* GPIO_112 */
+		"UIM_BATT_ALARM",	/* GPIO_113 */
+		"GRFC_8",		/* GPIO_114 */
+		"GRFC_9",		/* GPIO_115 */
+		"TX_GTR_THRES",		/* GPIO_116 */
+		"ACCEL_INT",		/* GPIO_117 */
+		"GYRO_INT",		/* GPIO_118 */
+		"COMPASS_INT",		/* GPIO_119 */
+		"PROXIMITY_INT_N",	/* GPIO_120 */
+		"FP_IRQ",		/* GPIO_121 */
+		"P_SENSE",		/* GPIO_122 */
+		"HALL_INTR2",		/* GPIO_123 */
+		"HALL_INTR1",		/* GPIO_124 */
+		"TS_INT_N",		/* GPIO_125 */
+		"NC",			/* GPIO_126 */
+		"GRFC_11",		/* GPIO_127 */
+		"NC",			/* GPIO_128 */
+		"EXT_GPS_LNA_EN",	/* GPIO_129 */
+		"NC",			/* GPIO_130 */
+		"LCD_ID_DET2",		/* GPIO_131 */
+		"LCD_TE2",		/* GPIO_132 */
+		"GRFC_14",		/* GPIO_133 */
+		"GSM_TX2_PHASE_D",	/* GPIO_134 */
+		"NC",			/* GPIO_135 */
+		"GRFC_15",		/* GPIO_136 */
+		"RFFE3_DATA",		/* GPIO_137 */
+		"RFFE3_CLK",		/* GPIO_138 */
+		"NC",			/* GPIO_139 */
+		"NC",			/* GPIO_140 */
+		"RFFE5_DATA",		/* GPIO_141 */
+		"RFFE5_CLK",		/* GPIO_142 */
+		"NC",			/* GPIO_143 */
+		"COEX_UART_TX",		/* GPIO_144 */
+		"COEX_UART_RX",		/* GPIO_145 */
+		"RFFE2_DATA",		/* GPIO_146 */
+		"RFFE2_CLK",		/* GPIO_147 */
+		"RFFE1_DATA",		/* GPIO_148 */
+		"RFFE1_CLK";		/* GPIO_149 */
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+
+	touchscreen_sleep: touchscreen-sleep-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
new file mode 100644
index 0000000000..5e3b9130e9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996pro.dtsi"
+#include "msm8996-xiaomi-common.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/ {
+	model = "Xiaomi Mi Note 2";
+	compatible = "xiaomi,scorpio", "qcom,msm8996pro", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,msm-id = <305 0x10000>;
+	qcom,board-id = <34 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@83401000 {
+			compatible = "simple-framebuffer";
+			reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			/* DSI0 and MDP SMMU clocks */
+			clocks = <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MMSS_MMAGIC_AHB_CLK>,
+				 <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MMSS_MISC_AHB_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_ESC0_CLK>,
+				 <&mmcc SMMU_MDP_AHB_CLK>,
+				 <&mmcc SMMU_MDP_AXI_CLK>;
+
+			/* MDSS power domain */
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@83401000 {
+			reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+	};
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/scorpio/adsp.mbn";
+};
+
+&blsp2_i2c6 {
+	touchkey: touchkey@28 {
+		compatible = "cypress,sf3155";
+		reg = <0x28>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&vreg_l6a_1p8>;
+		vdd-supply = <&vdd_3v2_tp>;
+		linux,keycodes = <KEY_BACK KEY_MENU>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touchkey_default>;
+		pinctrl-1 = <&touchkey_sleep>;
+	};
+
+	touchscreen: atmel-mxt-ts@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+		vdda-supply = <&vreg_l6a_1p8>;
+		vdd-supply = <&vdd_3v2_tp>;
+		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-1 = <&touchscreen_sleep>;
+	};
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn";
+	};
+};
+
+&mdp_smmu {
+	/*
+	 * Probing this SMMU causes a crash due to writing to some secure
+	 * registers. Disable it for now.
+	 */
+	status = "disabled";
+};
+
+&mdss {
+	/*
+	 * MDSS depends on the MDP SMMU, and probing it alters the bootloader
+	 * configured framebuffer used by simplefb. Disable it for now.
+	 */
+	status = "disabled";
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/scorpio/mba.mbn",
+			"qcom/msm8996/scorpio/modem.mbn";
+};
+
+&pm8994_lpg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_default>;
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_WHITE>;
+		function = LED_FUNCTION_KBD_BACKLIGHT;
+		function-enumerator = <1>;
+	};
+
+	led@6 {
+		reg = <6>;
+		color = <LED_COLOR_ID_WHITE>;
+		function = LED_FUNCTION_KBD_BACKLIGHT;
+		function-enumerator = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/scorpio/slpi.mbn";
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "scorpio";
+	audio-routing = "RX_BIAS", "MCLK";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/scorpio/venus.mbn";
+};
+
+&rpm_requests {
+	regulators-0 {
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <1300000>;
+		};
+		vreg_l11a_1p1: l11 {
+			regulator-name = "vreg_l11a_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l18a_2p8: l18 {
+			regulator-name = "vreg_l18a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <3500000>;
+		};
+		vreg_l29a_2p7: l29 {
+			regulator-name = "vreg_l29a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+	};
+};
+
+&vdd_gfx {
+	regulator-max-microvolt = <1065000>;
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"VOL_UP_N",		/* GPIO_2  */
+		"SPKR_ID",		/* GPIO_3  */
+		"PWM_HAPTICS",		/* GPIO_4  */
+		"INFARED_DRV",		/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"KEYPAD_LED_EN_A",	/* GPIO_7  */
+		"WL_EN",		/* GPIO_8  */
+		"3P3_ENABLE",		/* GPIO_9  */
+		"KEYPAD_LED_EN_B",	/* GPIO_10 */
+		"FP_ID",		/* GPIO_11 */
+		"NC",			/* GPIO_12 */
+		"NC",			/* GPIO_13 */
+		"NC",			/* GPIO_14 */
+		"DIVCLK1_CDC",		/* GPIO_15 */
+		"DIVCLK2_HAPTICS",	/* GPIO_16 */
+		"NC",			/* GPIO_17 */
+		"32KHz_CLK_IN",		/* GPIO_18 */
+		"BT_EN",		/* GPIO_19 */
+		"PMIC_SLB",		/* GPIO_20 */
+		"UIM_BATT_ALARM",	/* GPIO_21 */
+		"NC";			/* GPIO_22 */
+
+	keypad_default: keypad-default-state {
+		pins = "gpio7", "gpio10";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
+	};
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"VREF_SDC_UIM_APC",	/* MPP_1 */
+		"NC",			/* MPP_2 */
+		"VREF_DACX",		/* MPP_3 */
+		"NC",			/* MPP_4 */
+		"NC",			/* MPP_5 */
+		"STAT_SMB1351",		/* MPP_6 */
+		"NC",			/* MPP_7 */
+		"NC";			/* MPP_8 */
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"SPKR_PA_RST",		/* GPIO_2  */
+		"NC",			/* GPIO_3  */
+		"NC",			/* GPIO_4  */
+		"NC",			/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"NC",			/* GPIO_7  */
+		"NC",			/* GPIO_8  */
+		"NC",			/* GPIO_9  */
+		"NC";			/* GPIO_10 */
+};
+
+&tlmm {
+	gpio-line-names =
+		"ESE_SPI_MOSI",		/* GPIO_0   */
+		"ESE_SPI_MISO",		/* GPIO_1   */
+		"NC",			/* GPIO_2   */
+		"ESE_SPI_CLK",		/* GPIO_3   */
+		"MSM_UART_TX",		/* GPIO_4   */
+		"MSM_UART_RX",		/* GPIO_5   */
+		"NFC_I2C_SDA",		/* GPIO_6   */
+		"NFC_I2C_SCL",		/* GPIO_7   */
+		"OLED_RESET_N",		/* GPIO_8   */
+		"NFC_IRQ",		/* GPIO_9   */
+		"OLED_TE",		/* GPIO_10  */
+		"OLED_ID_DET1",		/* GPIO_11  */
+		"NFC_DISABLE",		/* GPIO_12  */
+		"CAM_MCLK0",		/* GPIO_13  */
+		"OLED_ID_DET2",		/* GPIO_14  */
+		"CAM_MCLK2",		/* GPIO_15  */
+		"ESE_PWR_REQ",		/* GPIO_16  */
+		"CCI_I2C_SDA0",		/* GPIO_17  */
+		"CCI_I2C_SCL0",		/* GPIO_18  */
+		"CCI_I2C_SDA1",		/* GPIO_19  */
+		"CCI_I2C_SCL1",		/* GPIO_20  */
+		"NFC_DWL_REQ",		/* GPIO_21  */
+		"CCI_TIMER1",		/* GPIO_22  */
+		"WEBCAM1_RESET_N",	/* GPIO_23  */
+		"ESE_IRQ",		/* GPIO_24  */
+		"NC",			/* GPIO_25  */
+		"WEBCAM1_STANDBY",	/* GPIO_26  */
+		"NC",			/* GPIO_27  */
+		"NC",			/* GPIO_28  */
+		"OLED_ERR_FG",		/* GPIO_29  */
+		"CAM1_RST_N",		/* GPIO_30  */
+		"HIFI_SW_MUTE",		/* GPIO_31  */
+		"NC",			/* GPIO_32  */
+		"NC",			/* GPIO_33  */
+		"FP_DOME_SW",		/* GPIO_34  */
+		"PCI_E0_RST_N",		/* GPIO_35  */
+		"PCI_E0_CLKREQ_N",	/* GPIO_36  */
+		"PCI_E0_WAKE",		/* GPIO_37  */
+		"OV_PWDN",		/* GPIO_38  */
+		"NC",			/* GPIO_39  */
+		"VDDR_1P6_EN",		/* GPIO_40  */
+		"QCA_UART_TXD",		/* GPIO_41  */
+		"QCA_UART_RXD",		/* GPIO_42  */
+		"QCA_UART_CTS",		/* GPIO_43  */
+		"QCA_UART_RTS",		/* GPIO_44  */
+		"MAWC_UART_TX",		/* GPIO_45  */
+		"MAWC_UART_RX",		/* GPIO_46  */
+		"NC",			/* GPIO_47  */
+		"NC",			/* GPIO_48  */
+		"AUDIO_SWITCH_EN",	/* GPIO_49  */
+		"FP_SPI_RST",		/* GPIO_50  */
+		"TYPEC_I2C_SDA",	/* GPIO_51  */
+		"TYPEC_I2C_SCL",	/* GPIO_52  */
+		"CODEC_INT2_N",		/* GPIO_53  */
+		"CODEC_INT1_N",		/* GPIO_54  */
+		"APPS_I2C7_SDA",	/* GPIO_55  */
+		"APPS_I2C7_SCL",	/* GPIO_56  */
+		"FORCE_USB_BOOT",	/* GPIO_57  */
+		"SPKR_I2S_BCK",		/* GPIO_58  */
+		"SPKR_I2S_WS",		/* GPIO_59  */
+		"SPKR_I2S_DOUT",	/* GPIO_60  */
+		"SPKR_I2S_DIN",		/* GPIO_61  */
+		"ESE_RSTN",		/* GPIO_62  */
+		"TYPEC_INT",		/* GPIO_63  */
+		"CODEC_RESET_N",	/* GPIO_64  */
+		"PCM_CLK",		/* GPIO_65  */
+		"PCM_SYNC",		/* GPIO_66  */
+		"PCM_DIN",		/* GPIO_67  */
+		"PCM_DOUT",		/* GPIO_68  */
+		"CDC_44K1_CLK",		/* GPIO_69  */
+		"SLIMBUS_CLK",		/* GPIO_70  */
+		"SLIMBUS_DATA0",	/* GPIO_71  */
+		"SLIMBUS_DATA1",	/* GPIO_72  */
+		"LDO_5V_IN_EN",		/* GPIO_73  */
+		"NC",			/* GPIO_74  */
+		"TSP_RST_N",		/* GPIO_75  */
+		"NC",			/* GPIO_76  */
+		"TOUCHKEY_INT",		/* GPIO_77  */
+		"SPKR_I2S_MCLK",	/* GPIO_78  */
+		"SPKR_PA_INT",		/* GPIO_79  */
+		"SENSOR_RESET_N",	/* GPIO_80  */
+		"FP_SPI_MOSI",		/* GPIO_81  */
+		"FP_SPI_MISO",		/* GPIO_82  */
+		"FP_SPI_CS_N",		/* GPIO_83  */
+		"FP_SPI_CLK",		/* GPIO_84  */
+		"HIFI_SD",		/* GPIO_85  */
+		"CAM_VDD_1P05_EN",	/* GPIO_86  */
+		"MSM_TS_I2C_SDA",	/* GPIO_87  */
+		"MSM_TS_I2C_SCL",	/* GPIO_88  */
+		"NC",			/* GPIO_89  */
+		"ESE_SPI_CS_N",		/* GPIO_90  */
+		"NC",			/* GPIO_91  */
+		"NC",			/* GPIO_92  */
+		"NC",			/* GPIO_93  */
+		"NC",			/* GPIO_94  */
+		"NC",			/* GPIO_95  */
+		"NC",			/* GPIO_96  */
+		"GRFC_0",		/* GPIO_97  */
+		"GRFC_1",		/* GPIO_98  */
+		"NC",			/* GPIO_99  */
+		"GRFC_3",		/* GPIO_100 */
+		"GRFC_4",		/* GPIO_101 */
+		"NC",			/* GPIO_102 */
+		"NC",			/* GPIO_103 */
+		"GRFC_7",		/* GPIO_104 */
+		"UIM2_DATA",		/* GPIO_105 */
+		"UIM2_CLK",		/* GPIO_106 */
+		"UIM2_RESET",		/* GPIO_107 */
+		"UIM2_PRESENT",		/* GPIO_108 */
+		"UIM1_DATA",		/* GPIO_109 */
+		"UIM1_CLK",		/* GPIO_110 */
+		"UIM1_RESET",		/* GPIO_111 */
+		"UIM1_PRESENT",		/* GPIO_112 */
+		"UIM_BATT_ALARM",	/* GPIO_113 */
+		"GRFC_8",		/* GPIO_114 */
+		"GRFC_9",		/* GPIO_115 */
+		"TX_GTR_THRES",		/* GPIO_116 */
+		"ACC_INT",		/* GPIO_117 */
+		"GYRO_INT",		/* GPIO_118 */
+		"COMPASS_INT",		/* GPIO_119 */
+		"PROXIMITY_INT_N",	/* GPIO_120 */
+		"FP_IRQ",		/* GPIO_121 */
+		"TSP_TA",		/* GPIO_122 */
+		"HALL_INTR2",		/* GPIO_123 */
+		"HALL_INTR1",		/* GPIO_124 */
+		"TS_INT_N",		/* GPIO_125 */
+		"NC",			/* GPIO_126 */
+		"GRFC_11",		/* GPIO_127 */
+		"HIFI_PWR_EN",		/* GPIO_128 */
+		"EXT_GPS_LNA_EN",	/* GPIO_129 */
+		"NC",			/* GPIO_130 */
+		"NC",			/* GPIO_131 */
+		"NC",			/* GPIO_132 */
+		"GRFC_14",		/* GPIO_133 */
+		"GSM_TX2_PHASE_D",	/* GPIO_134 */
+		"HIFI_SW_SEL",		/* GPIO_135 */
+		"GRFC_15",		/* GPIO_136 */
+		"RFFE3_DATA",		/* GPIO_137 */
+		"RFFE3_CLK",		/* GPIO_138 */
+		"NC",			/* GPIO_139 */
+		"NC",			/* GPIO_140 */
+		"RFFE5_DATA",		/* GPIO_141 */
+		"RFFE5_CLK",		/* GPIO_142 */
+		"NC",			/* GPIO_143 */
+		"COEX_UART_TX",		/* GPIO_144 */
+		"COEX_UART_RX",		/* GPIO_145 */
+		"RFFE2_DATA",		/* GPIO_146 */
+		"RFFE2_CLK",		/* GPIO_147 */
+		"RFFE1_DATA",		/* GPIO_148 */
+		"RFFE1_CLK";		/* GPIO_149 */
+
+	touchkey_default: touchkey-default-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	touchkey_sleep: touchkey-sleep-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio75", "gpio125";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+
+	touchscreen_sleep: touchscreen-sleep-state {
+		pins = "gpio75", "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
new file mode 100644
index 0000000000..b74cff06f3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	/delete-node/ opp-table-cluster0;
+	/delete-node/ opp-table-cluster1;
+
+	/*
+	 * On MSM8996 Pro the cpufreq driver shifts speed bins into the high
+	 * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1
+	 * becomes 0x20, speed 2 becomes 0x40.
+	 */
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <384000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <441600>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <537600>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <614400>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <691200>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <768000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <844800>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <902400>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <979200>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1132800>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1190400>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1516800>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <384000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <441600>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <441600>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <537600>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <614400>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <691200>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <768000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <844800>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <902400>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <979200>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1056000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1132800>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1190400>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1286400>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1363200>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1440000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1516800>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+	};
+};
+
+&gpu_opp_table {
+	/*
+	 * Unlike CPU opp tables, the GPU driver does not shift speed bins.
+	 *
+	 * 652.8 Mhz is available on speed bin 0 only.
+	 * 624 Mhz and 560 Mhz are available on speed bins 0 and 1.
+	 * All the rest are available on all bins of the hardware (like on
+	 * plain 8996).
+	 */
+
+	opp-652800000 {
+		opp-hz = /bits/ 64 <652800000>;
+		opp-supported-hw = <0x01>;
+	};
+	opp-624000000 {
+		opp-hz = /bits/ 64 <624000000>;
+		opp-supported-hw = <0x03>;
+	};
+	opp-560000000 {
+		opp-hz = /bits/ 64 <560000000>;
+		opp-supported-hw = <0x03>;
+	};
+	/* The rest is inherited from msm8996 */
+};
+
+&cbf {
+	compatible = "qcom,msm8996pro-cbf";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
new file mode 100644
index 0000000000..102f3e9a79
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+	model = "Asus NovaGo TP370QL";
+	compatible = "asus,novago-tp370ql", "qcom,msm8998";
+	chassis-type = "convertible";
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchpad>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <123 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x0001>;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <37 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
new file mode 100644
index 0000000000..3b7172aa40
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/*
+ * Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630,
+ * Asus NovaGo TP370QL, and HP Envy x2.  All three devices are basically the
+ * same, with differences in peripherals.
+ */
+
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+
+/ {
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+/*
+ * The laptop FW does not appear to support the retention state as it is
+ * not advertised as enabled in ACPI, and enabling it in DT can cause boot
+ * hangs.
+ */
+&CPU0 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU1 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU2 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU3 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU4 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU5 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU6 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU7 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+/*
+ * If EFIFB is used, enabling MMCC will cause important MMSS clocks to be cleaned
+ * up, because as far as Linux is concerned - they are unused. Disable it by default
+ * on clamshell devices, as it will break them, unless either simplefb is configured to
+ * hold a vote for these clocks, or panels are brought up properly, using drm/msm.
+ */
+&mmcc {
+	status = "disabled";
+};
+
+&mmss_smmu {
+	status = "disabled";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vph_pwr>;
+		vdd_l10_l23_l25-supply = <&vph_pwr>;
+		vdd_l13_l19_l21-supply = <&vph_pwr>;
+		vdd_l16_l28-supply = <&vph_pwr>;
+		vdd_l18_l22-supply = <&vph_pwr>;
+		vdd_l20_l24-supply = <&vph_pwr>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <1808000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p88: l14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&remoteproc_mss {
+	status = "okay";
+};
+
+&sdhc2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on &sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	touchpad: touchpad-pin-state {
+		pins = "gpio123";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&ufshc {
+	status = "okay";
+};
+
+&ufsphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "host"; /* Force to host until we have Type-C hooked up */
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
new file mode 100644
index 0000000000..b6a214bea7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -0,0 +1,715 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "F(x)tec Pro1 (QX1000)";
+	compatible = "fxtec,pro1", "qcom,msm8998";
+	chassis-type = "handset";
+	qcom,board-id = <0x02000b 0x10>;
+
+	aliases {
+		serial0 = &blsp2_uart1;
+		serial1 = &blsp1_uart3;
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-hall-sensors {
+		compatible = "gpio-keys";
+		label = "Hall sensors";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor1_default>;
+
+		event-hall-sensor1 {
+			label = "Keyboard Hall Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <15>;
+			wakeup-source;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+		};
+	};
+
+	gpio-kb-extra-keys {
+		compatible = "gpio-keys";
+		label = "Keyboard extra keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_kb_pins_extra>;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-super-l {
+			label = "Super Left";
+			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_FN>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-super-r {
+			label = "Super Right";
+			gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_FN>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-shift {
+			label = "Shift";
+			gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHTSHIFT>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-ctrl {
+			label = "Ctrl";
+			gpios = <&tlmm 128 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFTCTRL>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-alt {
+			label = "Alt";
+			gpios = <&tlmm 129 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFTALT>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Side buttons";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
+			    <&cam_snapshot_pin_a>;
+		button-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		button-camera-focus {
+			label = "Camera Focus";
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+
+	keyboard-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			default-state = "off";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+			label = "white:kbd_backlight";
+			retain-state-suspended;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_CAPSLOCK;
+			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+			label = "yellow:capslock";
+			linux,default-trigger = "kbd-capslock";
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2000000>;
+			no-map;
+		};
+
+		zap_shader_region: memory@f6400000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf6400000 0x0 0x2000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			console-size = <0x60000>;
+			ecc-size = <16>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			record-size = <0x10000>;
+		};
+	};
+
+	ts_vio_vreg: ts-vio-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_vio_reg";
+		startup-delay-us = <2>;
+		enable-active-high;
+		gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_vio_default>;
+		regulator-always-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt9286";
+		reg = <0x14>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+		AVDD28-supply = <&vreg_l28_3p0>;
+		VDDIO-supply = <&ts_vio_vreg>;
+		pinctrl-names = "active";
+		pinctrl-0 = <&ts_rst_n>, <&ts_int_n>;
+	};
+};
+
+&etf {
+	status = "okay";
+};
+
+&etm1 {
+	status = "okay";
+};
+
+&etm2 {
+	status = "okay";
+};
+
+&etm3 {
+	status = "okay";
+};
+
+&etm4 {
+	status = "okay";
+};
+
+&etm5 {
+	status = "okay";
+};
+
+&etm6 {
+	status = "okay";
+};
+
+&etm7 {
+	status = "okay";
+};
+
+&etm8 {
+	status = "okay";
+};
+
+&etr {
+	status = "okay";
+};
+
+&funnel1 {
+	status = "okay";
+};
+
+&funnel2 {
+	status = "okay";
+};
+
+&funnel3 {
+	status = "okay";
+};
+
+&funnel4 {
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
+};
+
+&funnel5 {
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* Hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpios {
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	cam_focus_pin_a: cam-focus-btn-active-state {
+		pins = "gpio7";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	cam_snapshot_pin_a: cam-snapshot-btn-active-state {
+		pins = "gpio8";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&replicator1 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <1808000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p88: l14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_mss {
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+
+	mdp_vsync_n: mdp-vsync-n-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	gpio_kb_pins_extra: gpio-kb-pins-extra-state {
+		pins = "gpio21", "gpio32", "gpio33", "gpio114",
+		       "gpio128", "gpio129";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	ts_vio_default: ts-vio-def-state {
+		pins = "gpio81";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ts_rst_n: ts-rst-n-state {
+		pins = "gpio89";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	hall_sensor1_default: hall-sensor1-def-state {
+		pins = "gpio124";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ts_int_n: ts-int-n-state {
+		pins = "gpio125";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <8>;
+	};
+};
+
+&sdhc2 {
+	status = "okay";
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on &sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&stm {
+	status = "okay";
+};
+
+&ufshc {
+	status = "okay";
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
+/* GT9286 analog supply */
+&vreg_l28_3p0 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
new file mode 100644
index 0000000000..38389c6a3f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+	model = "HP Envy x2";
+	compatible = "hp,envy-x2", "qcom,msm8998";
+	chassis-type = "convertible";
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchpad>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
new file mode 100644
index 0000000000..a105143bee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+	model = "Lenovo Miix 630";
+	compatible = "lenovo,miix-630", "qcom,msm8998";
+	chassis-type = "convertible";
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchpad>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&remoteproc_mss {
+	firmware-name = "qcom/msm8998/LENOVO/81F1/qcdsp1v28998.mbn",
+			"qcom/msm8998/LENOVO/81F1/qcdsp28998.mbn";
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
new file mode 100644
index 0000000000..4319f4da89
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
+	compatible = "qcom,msm8998-mtp", "qcom,msm8998";
+	chassis-type = "handset";
+
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &blsp2_uart1;
+		serial1 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&etf {
+	status = "okay";
+};
+
+&etm1 {
+	status = "okay";
+};
+
+&etm2 {
+	status = "okay";
+};
+
+&etm3 {
+	status = "okay";
+};
+
+&etm4 {
+	status = "okay";
+};
+
+&etm5 {
+	status = "okay";
+};
+
+&etm6 {
+	status = "okay";
+};
+
+&etm7 {
+	status = "okay";
+};
+
+&etm8 {
+	status = "okay";
+};
+
+&etr {
+	status = "okay";
+};
+
+&funnel1 {
+	status = "okay";
+};
+
+&funnel2 {
+	status = "okay";
+};
+
+&funnel3 {
+	status = "okay";
+};
+
+&funnel4 {
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
+};
+
+&funnel5 {
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* Hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&replicator1 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <1808000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p88: l14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_mss {
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
+&sdhc2 {
+	status = "okay";
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on &sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&stm {
+	status = "okay";
+};
+
+&ufshc {
+	status = "okay";
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "host"; /* Force to host until we have Type-C hooked up */
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
new file mode 100644
index 0000000000..fac8b3510c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * OnePlus 5 (cheeseburger) device tree
+ *
+ * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
+ */
+
+#include <dt-bindings/leds/common.h>
+#include "msm8998-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 5";
+	compatible = "oneplus,cheeseburger", "qcom,msm8998";
+	chassis-type = "handset";
+	/* Required for bootloader to select correct board */
+	qcom,board-id = <8 0 16859 23>;
+
+	/* Capacitive keypad button backlight */
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_backlight_default>;
+
+		led-keypad-backlight {
+			gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			default-state = "off";
+		};
+	};
+};
+
+&pmi8998_gpios {
+	button_backlight_default: button-backlight-state {
+		pins = "gpio5";
+		function = "normal";
+		bias-pull-down;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
new file mode 100644
index 0000000000..68e634f821
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * OnePlus 5(T) (cheeseburger / dumpling) common device tree source based on msm8998-mtp.dtsi
+ *
+ * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	/* Required for bootloader to select correct board */
+	qcom,msm-id = <292 0x20001>; /* 8998 v2.1 */
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Use display framebuffer setup by the UEFI XBL bootloader for simplefb */
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			* That's a lot of clocks, but it's necessary due
+			* to unused clk cleanup & no panel driver yet..
+			*/
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_BYTE0_INTF_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_ESC0_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	reserved-memory {
+		/* Bootloader display framebuffer region */
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		/* For getting crash logs using Android downstream kernels */
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xac000000 0x0 0x200000>;
+			console-size = <0x80000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x8000>;
+			ftrace-size = <0x20000>;
+		};
+
+		/*
+		 * The following memory regions on downstream are "dynamically allocated"
+		 * but given the same addresses every time. Hard code them as these addresses
+		 * are where the OnePlus signed firmware expects them to be.
+		 */
+		ipa_fws_region: ipa@f6800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf6800000 0x0 0x5000>;
+			no-map;
+		};
+		zap_shader_region: gpu@f6900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf6900000 0x0 0x2000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Volume buttons";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_keys_default>;
+
+		button-vol-down {
+			label = "Volume down";
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "Volume up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall effect sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor_default>;
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+/*
+ * OnePlus' ADSP firmware requires 30 MiB in total, so increase the adsp_mem
+ * region by 4 MiB to account for this while relocating the other now
+ * conflicting memory nodes accordingly.
+ */
+&adsp_mem {
+	reg = <0x0 0x8b200000 0x0 0x1e00000>;
+};
+&mpss_mem {
+	reg = <0x0 0x8d000000 0x0 0x7000000>;
+};
+&venus_mem {
+	reg = <0x0 0x94000000 0x0 0x500000>;
+};
+&mba_mem {
+	reg = <0x0 0x94500000 0x0 0x200000>;
+};
+&slpi_mem {
+	reg = <0x0 0x94700000 0x0 0xf00000>;
+};
+&ipa_fw_mem {
+	reg = <0x0 0x95600000 0x0 0x10000>;
+};
+&ipa_gsi_mem {
+	reg = <0x0 0x95610000 0x0 0x5000>;
+};
+&gpu_mem {
+	reg = <0x0 0x95615000 0x0 0x100000>;
+};
+&wlan_msa_mem {
+	reg = <0x0 0x95715000 0x0 0x100000>;
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+		vdd-supply = <&vreg_l28_3p0>;
+		vio-supply = <&vreg_l6a_1p8>;
+
+		syna,reset-delay-ms = <20>;
+		syna,startup-delay-ms = <20>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4_f12: rmi4-f12@12 {
+			reg = <0x12>;
+			syna,rezero-wait-ms = <20>;
+			syna,sensor-type = <1>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <122>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 46 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	/* VDD_GFX supply */
+	pm8005_s1: s1 {
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+		/* Hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpios {
+	vol_keys_default: vol-keys-state {
+		pins = "gpio5", "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <1808000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p88: l14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	hall_sensor_default: hall-sensor-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	nfc_int_active: nfc-int-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_active: nfc-enable-active-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+};
+
+&usb3 {
+	status = "okay";
+
+	/* Disable USB3 clock requirement as the device only supports USB2 */
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb3_dwc3 {
+	/* Drop the unused USB 3 PHY */
+	phys = <&qusb2phy>;
+	phy-names = "usb2-phy";
+
+	/* Fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Force to peripheral until we can switch modes */
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	/* Leave disabled until MSS is functional */
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts
new file mode 100644
index 0000000000..5d0dabbaee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * OnePlus 5T (dumpling) device tree
+ *
+ * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
+ */
+
+#include "msm8998-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 5T";
+	compatible = "oneplus,dumpling", "qcom,msm8998";
+	chassis-type = "handset";
+	/* Required for bootloader to select correct board */
+	qcom,board-id = <8 0 17801 43>;
+};
+
+/* Update the screen height values from 1920 to 2160 on the 5T */
+&framebuffer0 {
+	height = <2160>;
+};
+
+/* Adjust digitizer area height to match the 5T's taller panel */
+&rmi4_f12 {
+	touchscreen-y-mm = <137>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
new file mode 100644
index 0000000000..fcaefc1b1e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-sony-xperia-yoshino.dtsi"
+
+/ {
+	model = "Sony Xperia XZ1 Compact";
+	compatible = "sony,xperia-lilac", "qcom,msm8998";
+	chassis-type = "handset";
+};
+
+&ibb {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+};
+
+&lab {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+	qcom,soft-start-us = <800>;
+};
+
+&vreg_l22a_2p85 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&vreg_lvs1a_1p8 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
new file mode 100644
index 0000000000..055b6a643d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-sony-xperia-yoshino.dtsi"
+
+/ {
+	model = "Sony Xperia XZ Premium";
+	compatible = "sony,xperia-maple", "qcom,msm8998";
+	chassis-type = "handset";
+
+	disp_dvdd_vreg: disp-dvdd-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_dvdd_en";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&four_k_disp_dcdc_en>;
+	};
+};
+
+&ibb {
+	regulator-min-microvolt = <5600000>;
+	regulator-max-microvolt = <5600000>;
+};
+
+&lab {
+	regulator-min-microvolt = <5800000>;
+	regulator-max-microvolt = <5800000>;
+	qcom,soft-start-us = <200>;
+};
+
+&pm8005_gpios {
+	gpio-line-names = "EAR_EN", /* GPIO_1 */
+			  "NC",
+			  "SLB",
+			  "OPTION_1_PM8005";
+};
+
+&pmi8998_gpios {
+	gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "TYPEC_UUSB_SEL",
+			  "VIB_LDO_EN",
+			  "NC",
+			  "DISPLAY_TYPE_SEL",
+			  "USB_SWITCH_SEL",
+			  "NC",
+			  "4K_DISP_DCDC_EN", /* GPIO_10 */
+			  "NC",
+			  "DIV_CLK3",
+			  "SPMI_I2C_SEL",
+			  "NC";
+
+	four_k_disp_dcdc_en: 4k-disp-dcdc-en-state {
+		pins = "gpio10";
+		function = "normal";
+		bias-disable;
+		drive-push-pull;
+		output-high;
+		power-source = <0>;
+		qcom,drive-strength = <1>;
+	};
+};
+
+&tlmm {
+	gpio-line-names = "", /* GPIO_0 */
+			  "",
+			  "",
+			  "",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "MDP_VSYNC_P", /* GPIO_10 */
+			  "RGBC_IR_INT",
+			  "NFC_VEN",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "NC",
+			  "NC",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "MAIN_CAM_PWR_EN",
+			  "TOF_INT_N",
+			  "NC",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "NC",
+			  "TOF_RESET_N",
+			  "CAM2_RSTN",
+			  "NC",
+			  "CAM1_RSTN", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "CC_DIR",
+			  "UIM2_DETECT_EN",
+			  "FP_RESET_N", /* GPIO_40 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_RXD",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "NC",
+			  "CODEC_INT2_N",
+			  "CODEC_INT1_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "TRAY2_DET_DS",
+			  "CODEC_RST_N",
+			  "WSA_L_EN",
+			  "WSA_R_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "LPASS_SLIMBUS_CLK", /* GPIO_70 */
+			  "LPASS_SLIMBUS_DATA0",
+			  "LPASS_SLIMBUS_DATA1",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_80 */
+			  "SW_SERVICE",
+			  "TX_GTR_THRES_IN",
+			  "HW_ID0",
+			  "HW_ID1",
+			  "NC",
+			  "NC",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NFC_IRQ",
+			  "NFC_DWLD_EN",
+			  "DISP_RESET_N",
+			  "TRAY2_DET",
+			  "CAM_SOF",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "DEBUG_GPIO0",
+			  "DEBUG_GPIO1", /* GPIO_100 */
+			  "GRFC4",
+			  "NC",
+			  "NC",
+			  "RSVD",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RST",
+			  "UIM1_PRESENT",
+			  "UIM_BATT_ALARM",
+			  "RSVD",
+			  "NC",
+			  "NC",
+			  "ACCEL_INT",
+			  "GYRO_INT",
+			  "COMPASS_INT",
+			  "ALS_PROX_INT_N", /* GPIO_120 */
+			  "FP_INT_N",
+			  "NC",
+			  "BAROMETER_INT",
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "NC",
+			  "NC",
+			  "USB_DETECT_EN",
+			  "NC",
+			  "QLINK_REQUEST", /* GPIO_130 */
+			  "QLINK_ENABLE",
+			  "NC",
+			  "TS_VDDIO_EN",
+			  "WMSS_RESET_N",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK", /* GPIO_140 */
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD",
+			  "RFFE2_DATA",
+			  "RFFE2_CLK",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
+
+&vreg_l22a_2p85 {
+	regulator-min-microvolt = <2704000>;
+	regulator-max-microvolt = <2704000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
new file mode 100644
index 0000000000..c21333aa73
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-sony-xperia-yoshino.dtsi"
+
+/ {
+	model = "Sony Xperia XZ1";
+	compatible = "sony,xperia-poplar", "qcom,msm8998";
+	chassis-type = "handset";
+};
+
+&ibb {
+	regulator-min-microvolt = <5600000>;
+	regulator-max-microvolt = <5600000>;
+};
+
+&lab {
+	regulator-min-microvolt = <5600000>;
+	regulator-max-microvolt = <5600000>;
+	qcom,soft-start-us = <800>;
+};
+
+&vreg_l18a_2p85 {
+	/* Note: Round-down from 2850000 to be a multiple of PLDO step-size 8000 */
+	regulator-min-microvolt = <2848000>;
+	regulator-max-microvolt = <2848000>;
+};
+
+&vreg_l22a_2p85 {
+	/* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */
+	regulator-min-microvolt = <2696000>;
+	regulator-max-microvolt = <2696000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
new file mode 100644
index 0000000000..876c6921dd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -0,0 +1,930 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
+	qcom,board-id = <8 0>;
+
+	clocks {
+		div1_mclk: divclk1 {
+			compatible = "gpio-gate-clock";
+			pinctrl-0 = <&div_clk1>;
+			pinctrl-names = "default";
+			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+			#clock-cells = <0>;
+			enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	board_vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	cam0_vdig_vreg: cam0-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "cam0_vdig";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_cam_pwr_en>;
+	};
+
+	cam1_vdig_vreg: cam1-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "cam1_vdig";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&chat_cam_pwr_en>;
+		vin-supply = <&vreg_s3a_1p35>;
+	};
+
+	cam_vio_vreg: cam-vio-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vio_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_cam_pwr_io_en>;
+		vin-supply = <&vreg_lvs1a_1p8>;
+	};
+
+	touch_vddio_vreg: touch-vddio-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_vddio_vreg";
+		startup-delay-us = <10000>;
+		gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_vddio_en>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+		vbus-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cc_dir_default &usb_detect_en>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Side buttons";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
+		button-vol-down {
+			label = "Volume Down";
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		button-camera-focus {
+			label = "Camera Focus";
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall sensors";
+		pinctrl-names = "default";
+		pinctrl-0 = <&acc_cover_open>;
+
+		event-hall-sensor0 {
+			label = "Cover Hall Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			debounce-interval = <30>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x3700000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		zap_shader_region: memory@f6400000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf6400000 0x0 0x2000>;
+			no-map;
+		};
+
+		adsp_region: memory@fe000000 {
+			reg = <0x0 0xfe000000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_region: memory@fe800000 {
+			reg = <0x0 0xfe800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vib_ldo_en>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	touchscreen@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_n>;
+
+		vdd-supply = <&vreg_l28_3p0>;
+		vio-supply = <&touch_vddio_vreg>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <1000>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5_sleep {
+	bias-disable;
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+
+		clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+
+	proximity@29 {
+		compatible = "st,vl53l0x";
+		reg = <0x29>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&cam_vio_vreg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tof_int_n &tof_reset>;
+	};
+};
+
+&ibb {
+	regulator-min-microamp = <800000>;
+	regulator-max-microamp = <800000>;
+	regulator-enable-ramp-delay = <200>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-ramp-delay = <1>;
+	regulator-settling-time-up-us = <600>;
+	regulator-settling-time-down-us = <1000>;
+	regulator-soft-start;
+	qcom,discharge-resistor-kohms = <300>;
+};
+
+&lab {
+	regulator-min-microamp = <200000>;
+	regulator-max-microamp = <200000>;
+	regulator-enable-ramp-delay = <500>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-ramp-delay = <1>;
+	regulator-settling-time-up-us = <50000>;
+	regulator-settling-time-down-us = <3000>;
+	regulator-soft-start;
+};
+
+&pm8005_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "SLB",
+			  "OPTION_1_PM8005";
+};
+
+&pm8005_regulators {
+	/* VDD_GFX supply */
+	pm8005_s1: s1 {
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1088000>;
+		regulator-enable-ramp-delay = <500>;
+		/* Hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpios {
+	gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */
+			  "NC",
+			  "WLAN_SW_CTRL (DISALLOWED)",
+			  "SSC_PWR_EN",
+			  "VOL_DOWN_N",
+			  "VOL_UP_N",
+			  "SNAPSHOT_N",
+			  "FOCUS_N",
+			  "FLASH_THERM",
+			  "", /* GPIO_10 */
+			  "",
+			  "",
+			  "DIV_CLK1",
+			  "NC",
+			  "NC (DISALLOWED)",
+			  "DIV_CLK3",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC (DISALLOWED)", /* GPIO_20 */
+			  "NFC_CLK_REQ",
+			  "NC (DISALLOWED)",
+			  "WCSS_PWR_REQ",
+			  "OPTION_1 (DISALLOWED)",
+			  "OPTION_2 (DISALLOWED)",
+			  "PM_SLB (DISALLOWED)";
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio7";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	snapshot_n: snapshot-n-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	div_clk1: div-clk1-state {
+		pins = "gpio13";
+		function = "func2";
+		power-source = <0>;
+	};
+};
+
+&pmi8998_gpios {
+	gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "TYPEC_UUSB_SEL",
+			  "VIB_LDO_EN",
+			  "NC",
+			  "DISPLAY_TYPE_SEL",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "DIV_CLK3",
+			  "SPMI_I2C_SEL",
+			  "NC";
+
+	main_cam_pwr_io_en: main-cam-pwr-io-en-state {
+		pins = "gpio1";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-disable;
+		drive-push-pull;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		power-source = <1>;
+	};
+
+	vib_ldo_en: vib-ldo-en-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-disable;
+		drive-push-pull;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		power-source = <0>;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2032000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-system-load = <73400>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-system-load = <12560>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l14a_1p85: l14 {
+			regulator-min-microvolt = <1848000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-system-load = <32000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p85: l18 { };
+
+		vreg_l19a_2p7: l19 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 { };
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&sdhc2 {
+	status = "okay";
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on &sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+	gpio-line-names = "", /* GPIO_0 */
+			  "",
+			  "",
+			  "",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "MDP_VSYNC_P", /* GPIO_10 */
+			  "RGBC_IR_INT",
+			  "NFC_VEN",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "NC",
+			  "NC",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "MAIN_CAM_PWR_EN",
+			  "TOF_INT_N",
+			  "NC",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "NC",
+			  "TOF_RESET_N",
+			  "CAM2_RSTN",
+			  "NC",
+			  "CAM1_RSTN", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "CC_DIR",
+			  "UIM2_DETECT_EN",
+			  "FP_RESET_N", /* GPIO_40 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_RXD",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "NC",
+			  "CODEC_INT2_N",
+			  "CODEC_INT1_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "TRAY2_DET_DS",
+			  "CODEC_RST_N",
+			  "WSA_L_EN",
+			  "WSA_R_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "LPASS_SLIMBUS_CLK", /* GPIO_70 */
+			  "LPASS_SLIMBUS_DATA0",
+			  "LPASS_SLIMBUS_DATA1",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_80 */
+			  "SW_SERVICE",
+			  "TX_GTR_THRES_IN",
+			  "HW_ID0",
+			  "HW_ID1",
+			  "NC",
+			  "NC",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NFC_IRQ",
+			  "NFC_DWLD_EN",
+			  "DISP_RESET_N",
+			  "TRAY2_DET",
+			  "CAM_SOF",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "DEBUG_GPIO0",
+			  "DEBUG_GPIO1", /* GPIO_100 */
+			  "GRFC4",
+			  "NC",
+			  "NC",
+			  "RSVD",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RST",
+			  "UIM1_PRESENT",
+			  "UIM_BATT_ALARM",
+			  "RSVD",
+			  "NC",
+			  "NC",
+			  "ACCEL_INT",
+			  "GYRO_INT",
+			  "COMPASS_INT",
+			  "ALS_PROX_INT_N", /* GPIO_120 */
+			  "FP_INT_N",
+			  "NC",
+			  "BAROMETER_INT",
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "NC",
+			  "NC",
+			  "USB_DETECT_EN",
+			  "NC",
+			  "QLINK_REQUEST", /* GPIO_130 */
+			  "QLINK_ENABLE",
+			  "NC",
+			  "NC",
+			  "WMSS_RESET_N",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK", /* GPIO_140 */
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD",
+			  "RFFE2_DATA",
+			  "RFFE2_CLK",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+
+	mdp_vsync_p: mdp-vsync-p-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	nfc_ven: nfc-ven-state {
+		pins = "gpio12";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	cam_mclk0_active: cam-mclk0-active-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam_mclk1_active: cam-mclk1-active-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cci0_default: cci0-default-state {
+		pins = "gpio18", "gpio19";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cci1_default: cci1-default-state {
+		pins = "gpio19", "gpio20";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	main_cam_pwr_en: main-cam-pwr-en-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	tof_int_n: tof-int-n-state {
+		pins = "gpio22";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	chat_cam_pwr_en: chat-cam-pwr-en-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	tof_reset: tof-reset-state {
+		pins = "gpio27";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cc_dir_default: cc-dir-active-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <16>;
+	};
+
+	acc_cover_open: acc-cover-open-state {
+		pins = "gpio124";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ts_int_n: ts-int-n-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	usb_detect_en: usb-detect-en-active-state {
+		pins = "gpio128";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	ts_vddio_en: ts-vddio-en-default-state {
+		pins = "gpio133";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+};
+
+/*
+ * WARNING:
+ * Disable UFS until card quirks are in to avoid unrecoverable hard-brick
+ * that would happen as soon as the UFS card gets probed as, without the
+ * required quirks, the bootloader will be erased right after card probe.
+ */
+&ufshc {
+	status = "disabled";
+};
+
+&ufsphy {
+	status = "disabled";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	/* Force to peripheral until we have Type-C hooked up */
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
new file mode 100644
index 0000000000..437b30cc8b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
@@ -0,0 +1,707 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Xiaomi Mi 6 (sagit) device tree source based on msm8998-mtp.dtsi
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Degdag Mohamed <degdagmohamed@gmail.com>
+ * Copyright (c) 2022, Dzmitry Sankouski <dsankouski@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/*
+ * Delete following upstream (msm8998.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &mba_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+	model = "Xiaomi Mi 6";
+	compatible = "xiaomi,sagit", "qcom,msm8998";
+	chassis-type = "handset";
+	/* Required for bootloader to select correct board */
+	qcom,board-id = <30 0>;
+
+	reserved-memory {
+		/*
+		 * Xiaomi's ADSP firmware requires 30 MiB in total, so increase the adsp_mem
+		 * region by 4 MiB to account for this while relocating the other now
+		 * conflicting memory nodes accordingly.
+		 */
+		adsp_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8d000000 {
+			reg = <0x0 0x8d000000 0x0 0x7000000>;
+			no-map;
+		};
+
+		venus_mem: memory@94000000 {
+			reg = <0x0 0x94000000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: memory@94500000 {
+			reg = <0x0 0x94500000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@94700000 {
+			reg = <0x0 0x94700000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@95600000 {
+			reg = <0x0 0x95600000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@95610000 {
+			reg = <0x0 0x95610000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@95615000 {
+			reg = <0x0 0x95615000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@95715000 {
+			reg = <0x0 0x95715000 0x0 0x100000>;
+			no-map;
+		};
+
+		/* Bootloader display framebuffer region */
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		/* For getting crash logs using Android downstream kernels */
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xac000000 0x0 0x200000>;
+			console-size = <0x80000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x8000>;
+			ftrace-size = <0x20000>;
+		};
+
+		/*
+		 * The following memory regions on downstream are "dynamically allocated"
+		 * but given the same addresses every time. Hard code them as these addresses
+		 * are where the Xiaomi signed firmware expects them to be.
+		 */
+		ipa_fws_region: memory@f7800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf7800000 0x0 0x5000>;
+			no-map;
+		};
+
+		zap_shader_region: memory@f7900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf7900000 0x0 0x2000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Volume buttons";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_key_default>;
+
+		key-vol-up {
+			label = "Volume up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall effect sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor_default_state>;
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	disp_vddts_vreg: disp-vddts-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "disp-vddts-regulator";
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c5 {
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ts_active_state>;
+		pinctrl-1 = <&ts_int_suspend_state &ts_reset_suspend_state>;
+
+		vdd-supply = <&disp_vddts_vreg>;
+		vio-supply = <&vreg_l6a_1p8>;
+
+		syna,reset-delay-ms = <20>;
+		syna,startup-delay-ms = <20>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <64>;
+			touchscreen-y-mm = <114>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <20>;
+		};
+
+		rmi4-f1a@1a {
+			reg = <0x1a>;
+		};
+	};
+};
+
+&blsp1_i2c5_sleep {
+	/delete-property/ bias-pull-up;
+	bias-disable;
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 46 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	compatible = "qcom,pm8005-regulators";
+
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpios {
+	vol_up_key_default: vol-up-key-default-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	audio_mclk_pin: audio-mclk-pin-active-state {
+		pins = "gpio13";
+		function = "func2";
+		power-source = <0>;
+	};
+};
+
+&qusb2phy {
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	cci1_default_state: cci1-default-state {
+		pins = "gpio19", "gpio20";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cdc_reset_n_state: cdc-reset-n-state {
+		pins = "gpio64";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <16>;
+		output-high;
+	};
+
+	hall_sensor_default_state: hall-sensor-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdss_dsi_active_state: mdss-dsi-active-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_suspend_state: mdss-dsi-suspend-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_active_state: mdss-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_suspend_state: mdss-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	msm_mclk0_active_state: msm-mclk0-active-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_mclk0_suspend_state: msm-mclk0-suspend-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	msm_mclk1_active_state: msm-mclk1-active-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_mclk1_suspend_state: msm-mclk1-suspend-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	nfc_int_active_state: nfc-int-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_int_suspend_state: nfc-int-suspend-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_active_state: nfc-enable-active-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_suspend_state: nfc-enable-suspend-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	ts_active_state: ts-active-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	ts_int_suspend_state: ts-int-suspend-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_reset_suspend_state: ts-reset-suspend-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_int_n_state: wcd-int-n-state {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state {
+		pins = "gpio65";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	wsa_rightspk_pwr_n_state: wsa-rightspk-pwr-n-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&ufshc {
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+	status = "okay";
+};
+
+&ufsphy {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+};
+
+&usb3 {
+	/* Disable USB3 clock requirement as the device only supports USB2 */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	/* Drop the unused USB 3 PHY */
+	phys = <&qusb2phy>;
+	phy-names = "usb2-phy";
+
+	/* Fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Force to peripheral until we can switch modes */
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
new file mode 100644
index 0000000000..f180047cac
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -0,0 +1,3193 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8998.h>
+#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	qcom,msm-id = <292 0x0>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem_mem: smem-mem@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x2d00000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@88f00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x88f00000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		spss_mem: memory@8ab00000 {
+			reg = <0x0 0x8ab00000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8cc00000 {
+			reg = <0x0 0x8cc00000 0x0 0x7000000>;
+			no-map;
+		};
+
+		venus_mem: memory@93c00000 {
+			reg = <0x0 0x93c00000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: memory@94100000 {
+			reg = <0x0 0x94100000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@94300000 {
+			reg = <0x0 0x94300000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@95200000 {
+			reg = <0x0 0x95200000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@95210000 {
+			reg = <0x0 0x95210000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@95600000 {
+			reg = <0x0 0x95600000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@95700000 {
+			reg = <0x0 0x95700000 0x0 0x100000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+
+	clocks {
+		xo: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1536>;
+			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1536>;
+			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1536>;
+			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1536>;
+			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-retention";
+				/* CPU Retention (C2D), L2 Active */
+				arm,psci-suspend-param = <0x00000002>;
+				entry-latency-us = <81>;
+				exit-latency-us = <86>;
+				min-residency-us = <504>;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <814>;
+				exit-latency-us = <4562>;
+				min-residency-us = <9183>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-retention";
+				/* CPU Retention (C2D), L2 Active */
+				arm,psci-suspend-param = <0x00000002>;
+				entry-latency-us = <79>;
+				exit-latency-us = <82>;
+				min-residency-us = <1302>;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <724>;
+				exit-latency-us = <2027>;
+				min-residency-us = <9419>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8998", "qcom,scm";
+		};
+	};
+
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-131250000 {
+			opp-hz = /bits/ 64 <131250000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-210000000 {
+			opp-hz = /bits/ 64 <210000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-312500000 {
+			opp-hz = /bits/ 64 <312500000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8998";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
+					clocks = <&xo>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8998-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_plus: opp10 {
+							opp-level = <RPM_SMD_LEVEL_BINNING>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 26>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		clust0-mhm-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_mhm_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		clust1-mhm-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_mhm_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster1-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cluster1_l2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		multimedia-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				multimedia_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-msm8998";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00100000 0xb0000>;
+
+			clock-names = "xo", "sleep_clk";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+
+			/*
+			 * The hypervisor typically configures the memory region where these clocks
+			 * reside as read-only for the HLOS. If the HLOS tried to enable or disable
+			 * these clocks on a device with such configuration (e.g. because they are
+			 * enabled but unused during boot-up), the device will most likely decide
+			 * to reboot.
+			 * In light of that, we are conservative here and we list all such clocks
+			 * as protected. The board dts (or a user-supplied dts) can override the
+			 * list of protected clocks if it differs from the norm, and it is in fact
+			 * desired for the HLOS to manage these clocks
+			 */
+			protected-clocks = <AGGRE2_SNOC_NORTH_AXI>,
+					   <SSC_XO>,
+					   <SSC_CNOC_AHBS_CLK>;
+		};
+
+		rpm_msg_ram: sram@778000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00778000 0x7000>;
+		};
+
+		qfprom: qfprom@784000 {
+			compatible = "qcom,msm8998-qfprom", "qcom,qfprom";
+			reg = <0x00784000 0x621c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@23a {
+				reg = <0x23a 0x1>;
+				bits = <0 4>;
+			};
+		};
+
+		tsens0: thermal@10ab000 {
+			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+			reg = <0x010ab000 0x1000>, /* TM */
+			      <0x010aa000 0x1000>; /* SROT */
+			#qcom,sensors = <14>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal@10ae000 {
+			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+			reg = <0x010ae000 0x1000>, /* TM */
+			      <0x010ad000 0x1000>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		anoc1_smmu: iommu@1680000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x01680000 0x10000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <0>;
+			interrupts =
+				<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		anoc2_smmu: iommu@16c0000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x016c0000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <0>;
+			interrupts =
+				<GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 462 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
+			reg = <0x01c00000 0x2000>,
+			      <0x1b000000 0xf1d>,
+			      <0x1b000f20 0xa8>,
+			      <0x1b100000 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			num-lanes = <1>;
+			phys = <&pciephy>;
+			phy-names = "pciephy";
+			status = "disabled";
+
+			ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
+
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+			clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+			iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+		};
+
+		pcie_phy: phy@1c06000 {
+			compatible = "qcom,msm8998-qmp-pcie-phy";
+			reg = <0x01c06000 0x18c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			vdda-phy-supply = <&vreg_l1a_0p875>;
+			vdda-pll-supply = <&vreg_l2a_1p2>;
+
+			pciephy: phy@1c06800 {
+				reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "pcie_0_pipe_clk_src";
+				#clock-cells = <0>;
+			};
+		};
+
+		ufshc: ufshc@1da4000 {
+			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x01da4000 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufsphy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			power-domains = <&gcc UFS_GDSC>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_AXI_CLK>,
+				<&gcc GCC_AGGRE1_UFS_AXI_CLK>,
+				<&gcc GCC_UFS_AHB_CLK>,
+				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+				<&rpmcc RPM_SMD_LN_BB_CLK1>,
+				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			resets = <&gcc GCC_UFS_BCR>;
+			reset-names = "rst";
+		};
+
+		ufsphy: phy@1da7000 {
+			compatible = "qcom,msm8998-qmp-ufs-phy";
+			reg = <0x01da7000 0x18c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			clock-names =
+				"ref",
+				"ref_aux";
+			clocks =
+				<&gcc GCC_UFS_CLKREF_CLK>,
+				<&gcc GCC_UFS_PHY_AUX_CLK>;
+
+			reset-names = "ufsphy";
+			resets = <&ufshc 0>;
+
+			ufsphy_lanes: phy@1da7400 {
+				reg = <0x01da7400 0x128>,
+				      <0x01da7600 0x1fc>,
+				      <0x01da7c00 0x1dc>,
+				      <0x01da7800 0x128>,
+				      <0x01da7a00 0x1fc>;
+				#phy-cells = <0>;
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,msm8998-tcsr", "syscon";
+			reg = <0x01f60000 0x20000>;
+		};
+
+		tlmm: pinctrl@3400000 {
+			compatible = "qcom,msm8998-pinctrl";
+			reg = <0x03400000 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 150>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			sdc2_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_cd: sdc2-cd-state {
+				pins = "gpio95";
+				function = "gpio";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			blsp1_uart3_on: blsp1-uart3-on-state {
+				tx-pins {
+					pins = "gpio45";
+					function = "blsp_uart3_a";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio46";
+					function = "blsp_uart3_a";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cts-pins {
+					pins = "gpio47";
+					function = "blsp_uart3_a";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rfr-pins {
+					pins = "gpio48";
+					function = "blsp_uart3_a";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio32", "gpio33";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
+				pins = "gpio32", "gpio33";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c5_default: blsp1-i2c5-default-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
+				pins = "gpio43", "gpio44";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio43", "gpio44";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_spi_b_default: blsp1-spi-b-default-state {
+				pins = "gpio23", "gpio28";
+				function = "blsp1_spi_b";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_spi1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi2_default: blsp1-spi2-default-state {
+				pins = "gpio31", "gpio34", "gpio32", "gpio33";
+				function = "blsp_spi2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				function = "blsp_spi2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi4_default: blsp1-spi4-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "blsp_spi4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi5_default: blsp1-spi5-default-state {
+				pins = "gpio85", "gpio86", "gpio87", "gpio88";
+				function = "blsp_spi5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi6_default: blsp1-spi6-default-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "blsp_spi6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+
+			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
+				pins = "gpio55", "gpio56";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio55", "gpio56";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c3_default: blsp2-i2c3-default-state {
+				pins = "gpio51", "gpio52";
+				function = "blsp_i2c9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
+				pins = "gpio51", "gpio52";
+				function = "blsp_i2c9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c4_default: blsp2-i2c4-default-state {
+				pins = "gpio67", "gpio68";
+				function = "blsp_i2c10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
+				pins = "gpio67", "gpio68";
+				function = "blsp_i2c10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
+				pins = "gpio60", "gpio61";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
+				pins = "gpio60", "gpio61";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_spi1_default: blsp2-spi1-default-state {
+				pins = "gpio53", "gpio54", "gpio55", "gpio56";
+				function = "blsp_spi7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi2_default: blsp2-spi2-default-state {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "blsp_spi8";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi3_default: blsp2-spi3-default-state {
+				pins = "gpio49", "gpio50", "gpio51", "gpio52";
+				function = "blsp_spi9";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi4_default: blsp2-spi4-default-state {
+				pins = "gpio65", "gpio66", "gpio67", "gpio68";
+				function = "blsp_spi10";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi5_default: blsp2-spi5-default-state {
+				pins = "gpio58", "gpio59", "gpio60", "gpio61";
+				function = "blsp_spi11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi6_default: blsp2-spi6-default-state {
+				pins = "gpio81", "gpio82", "gpio83", "gpio84";
+				function = "blsp_spi12";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		remoteproc_mss: remoteproc@4080000 {
+			compatible = "qcom,msm8998-mss-pil";
+			reg = <0x04080000 0x100>, <0x04180000 0x20>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended =
+				<&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_QDSS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "bus", "mem", "gpll0_mss",
+				      "snoc_axi", "mnoc_axi", "qdss", "xo";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+
+			power-domains = <&rpmpd MSM8998_VDDCX>,
+					<&rpmpd MSM8998_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			metadata {
+				memory-region = <&mdata_mem>;
+			};
+
+			glink-edge {
+				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 15>;
+			};
+		};
+
+		adreno_gpu: gpu@5000000 {
+			compatible = "qcom,adreno-540.1", "qcom,adreno";
+			reg = <0x05000000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				<&gpucc RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_GPU_BIMC_GFX_CLK>,
+				<&gpucc RBCPR_CLK>,
+				<&gpucc GFX3D_CLK>;
+			clock-names = "iface",
+				"rbbmtimer",
+				"mem",
+				"mem_iface",
+				"rbcpr",
+				"core";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&rpmpd MSM8998_VDDMX>;
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+				opp-710000097 {
+					opp-hz = /bits/ 64 <710000097>;
+					opp-level = <RPM_SMD_LEVEL_TURBO>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-670000048 {
+					opp-hz = /bits/ 64 <670000048>;
+					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-596000097 {
+					opp-hz = /bits/ 64 <596000097>;
+					opp-level = <RPM_SMD_LEVEL_NOM>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-515000097 {
+					opp-hz = /bits/ 64 <515000097>;
+					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-414000000 {
+					opp-hz = /bits/ 64 <414000000>;
+					opp-level = <RPM_SMD_LEVEL_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-342000000 {
+					opp-hz = /bits/ 64 <342000000>;
+					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05040000 0x10000>;
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
+			clock-names = "iface", "mem", "mem_iface";
+
+			#global-interrupts = <0>;
+			#iommu-cells = <1>;
+			interrupts =
+				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * GPU-GX GDSC's parent is GPU-CX. We need to bring up the
+			 * GPU-CX for SMMU but we need both of them up for Adreno.
+			 * Contemporarily, we also need to manage the VDDMX rpmpd
+			 * domain in the Adreno driver.
+			 * Enable GPU CX/GX GDSCs here so that we can manage the
+			 * SoC VDDMX RPM Power Domain in the Adreno driver.
+			 */
+			power-domains = <&gpucc GPU_GX_GDSC>;
+			status = "disabled";
+		};
+
+		gpucc: clock-controller@5065000 {
+			compatible = "qcom,msm8998-gpucc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x05065000 0x9000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_CLK>;
+			clock-names = "xo",
+				      "gpll0";
+		};
+
+		remoteproc_slpi: remoteproc@5800000 {
+			compatible = "qcom,msm8998-slpi-pas";
+			reg = <0x05800000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			px-supply = <&vreg_lvs2a_1p8>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "xo", "aggre2";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8998_SSCCX>;
+			power-domain-names = "ssc_cx";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apcs_glb 27>;
+			};
+		};
+
+		stm: stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x06002000 0x1000>,
+			      <0x16280000 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel1: funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x06041000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel2: funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x06042000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel1_in6: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel3: funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x06045000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&funnel1_out>;
+					};
+				};
+			};
+		};
+
+		replicator1: replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x06046000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf: etf@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x06047000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint =
+						  <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etr: etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x06048000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@7840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07840000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@7940000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07940000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@7a40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07a40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm4: etm@7b40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07b40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		funnel4: funnel@7b60000 { /* APSS Funnel */
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07b60000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint =
+						  <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint =
+						  <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint =
+						  <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint =
+						  <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint =
+						  <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint =
+						  <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel5: funnel@7b70000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x07b70000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&funnel1_in6>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etm5: etm@7c40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07c40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU4>;
+
+			port {
+				etm4_out: endpoint {
+					remote-endpoint = <&apss_funnel_in4>;
+				};
+			};
+		};
+
+		etm6: etm@7d40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07d40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU5>;
+
+			port {
+				etm5_out: endpoint {
+					remote-endpoint = <&apss_funnel_in5>;
+				};
+			};
+		};
+
+		etm7: etm@7e40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07e40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU6>;
+
+			port {
+				etm6_out: endpoint {
+					remote-endpoint = <&apss_funnel_in6>;
+				};
+			};
+		};
+
+		etm8: etm@7f40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07f40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU7>;
+
+			port {
+				etm7_out: endpoint {
+					remote-endpoint = <&apss_funnel_in7>;
+				};
+			};
+		};
+
+		sram@290000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		spmi_bus: spmi@800f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0800f000 0x1000>,
+			      <0x08400000 0x1000000>,
+			      <0x09400000 0x1000000>,
+			      <0x0a400000 0x220000>,
+			      <0x0800a000 0x3000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		usb3: usb@a8f8800 {
+			compatible = "qcom,msm8998-dwc3", "qcom,dwc3";
+			reg = <0x0a8f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_AGGRE1_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			power-domains = <&gcc USB_30_GDSC>;
+
+			resets = <&gcc GCC_USB_30_BCR>;
+
+			usb3_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a800000 0xcd00>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+			};
+		};
+
+		usb3phy: phy@c010000 {
+			compatible = "qcom,msm8998-qmp-usb3-phy";
+			reg = <0x0c010000 0x18c>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			usb1_ssphy: phy@c010200 {
+				reg = <0xc010200 0x128>,
+				      <0xc010400 0x200>,
+				      <0xc010c00 0x20c>,
+				      <0xc010600 0x128>,
+				      <0xc010800 0x200>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		qusb2phy: phy@c012000 {
+			compatible = "qcom,msm8998-qusb2-phy";
+			reg = <0x0c012000 0x2a8>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2_hstx_trim>;
+		};
+
+		sdhc2: mmc@c0a4900 {
+			compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clock-names = "iface", "core", "xo";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@c144000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c144000 0x25000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart3: serial@c171000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c171000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart3_on>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@c175000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c175000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c1_default>;
+			pinctrl-1 = <&blsp1_i2c1_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c2: i2c@c176000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c176000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c3: i2c@c177000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c177000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c4: i2c@c178000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c178000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c5: i2c@c179000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c179000 0x600>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c5_default>;
+			pinctrl-1 = <&blsp1_i2c5_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c6: i2c@c17a000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c17a000 0x600>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi1: spi@c175000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c175000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi1_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi2: spi@c176000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c176000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi2_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi3: spi@c177000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c177000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi3_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi4: spi@c178000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c178000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi4_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi5: spi@c179000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c179000 0x600>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi5_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi6: spi@c17a000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c17a000 0x600>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi6_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_dma: dma-controller@c184000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c184000 0x25000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp2_uart1: serial@c1b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c1b0000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@c1b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b5000 0x600>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c2: i2c@c1b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b6000 0x600>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c3: i2c@c1b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b7000 0x600>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c3_default>;
+			pinctrl-1 = <&blsp2_i2c3_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c4: i2c@c1b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b8000 0x600>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c4_default>;
+			pinctrl-1 = <&blsp2_i2c4_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c5: i2c@c1b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b9000 0x600>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c5_default>;
+			pinctrl-1 = <&blsp2_i2c5_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c6: i2c@c1ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1ba000 0x600>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi1: spi@c1b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b5000 0x600>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi1_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi2: spi@c1b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b6000 0x600>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi2_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi3: spi@c1b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b7000 0x600>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi3_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi4: spi@c1b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b8000 0x600>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi4_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi5: spi@c1b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b9000 0x600>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi5_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi6: spi@c1ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1ba000 0x600>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi6_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmcc: clock-controller@c8c0000 {
+			compatible = "qcom,mmcc-msm8998";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xc8c0000 0x40000>;
+
+			clock-names = "xo",
+				      "gpll0",
+				      "dsi0dsi",
+				      "dsi0byte",
+				      "dsi1dsi",
+				      "dsi1byte",
+				      "hdmipll",
+				      "dplink",
+				      "dpvco",
+				      "gpll0_div";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_MMSS_GPLL0_CLK>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
+		};
+
+		mdss: display-subsystem@c900000 {
+			compatible = "qcom,msm8998-mdss";
+			reg = <0x0c900000 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+			iommus = <&mmss_smmu 0>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@c901000 {
+				compatible = "qcom,msm8998-dpu";
+				reg = <0x0c901000 0x8f000>,
+				      <0x0c9a8e00 0xf0>,
+				      <0x0c9b0000 0x2008>,
+				      <0x0c9b8000 0x1040>;
+				reg-names = "mdp",
+					    "regdma",
+					    "vbif",
+					    "vbif_nrt";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MNOC_AHB_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "mnoc",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&mmcc MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd MSM8998_VDDMX>;
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-171430000 {
+						opp-hz = /bits/ 64 <171430000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-275000000 {
+						opp-hz = /bits/ 64 <275000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-330000000 {
+						opp-hz = /bits/ 64 <330000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+
+					opp-412500000 {
+						opp-hz = /bits/ 64 <412500000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@c994000 {
+				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0c994000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_BYTE0_INTF_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd MSM8998_VDDCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@c994400 {
+				compatible = "qcom,dsi-phy-10nm-8998";
+				reg = <0x0c994400 0x200>,
+				      <0x0c994600 0x280>,
+				      <0x0c994a00 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@c996000 {
+				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0c996000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&mmcc MDSS_BYTE1_CLK>,
+					 <&mmcc MDSS_BYTE1_INTF_CLK>,
+					 <&mmcc MDSS_PCLK1_CLK>,
+					 <&mmcc MDSS_ESC1_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+						  <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd MSM8998_VDDCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@c996400 {
+				compatible = "qcom,dsi-phy-10nm-8998";
+				reg = <0x0c996400 0x200>,
+				      <0x0c996600 0x280>,
+				      <0x0c996a00 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		mmss_smmu: iommu@cd00000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x0cd00000 0x40000>;
+			#iommu-cells = <1>;
+
+			clocks = <&mmcc MNOC_AHB_CLK>,
+				 <&mmcc BIMC_SMMU_AHB_CLK>,
+				 <&mmcc BIMC_SMMU_AXI_CLK>;
+			clock-names = "iface-mm",
+				      "iface-smmu",
+				      "bus-smmu";
+
+			#global-interrupts = <0>;
+			interrupts =
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&mmcc BIMC_SMMU_GDSC>;
+		};
+
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,msm8998-adsp-pas";
+			reg = <0x17300000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8998_VDDCX>;
+			power-domain-names = "cx";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 9>;
+			};
+		};
+
+		apcs_glb: mailbox@17911000 {
+			compatible = "qcom,msm8998-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
+			reg = <0x17911000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@17920000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17920000 0x1000>;
+
+			frame@17921000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17921000 0x1000>,
+				      <0x17922000 0x1000>;
+			};
+
+			frame@17923000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17923000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17924000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17924000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17925000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17925000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17926000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17926000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17927000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17927000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17928000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17928000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x17a00000 0x10000>,       /* GICD */
+			      <0x17b00000 0x100000>;      /* GICR * 8 */
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			status = "disabled";
+			reg = <0x18800000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+			clock-names = "cxo_ref_clk_pin";
+			interrupts =
+				<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&anoc2_smmu 0x1900>,
+				 <&anoc2_smmu 0x1901>;
+			qcom,snoc-host-cap-8bit-quirk;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm2250.dtsi
new file mode 100644
index 0000000000..5f1d15db5c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm2250.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm2250", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+
+			pm2250_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				debounce = <15625>;
+				bias-pull-up;
+			};
+
+			pm2250_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm2250_gpios: gpio@c000 {
+			compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm2250_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm2250", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi
new file mode 100644
index 0000000000..99369a0cdb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm6125-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6125_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm6125", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6125_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				linux,code = <KEY_POWER>;
+				bias-pull-up;
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm6125_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6125_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6125_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@85 {
+				reg = <ADC5_VCOIN>;
+				qcom,pre-scaling = <1 3>;
+				label = "vcoin";
+			};
+
+			channel@4c {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "xo_therm";
+			};
+		};
+
+		pm6125_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pm6125_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		pm6125_gpios: gpio@c000 {
+			compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6125_gpios 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm6125", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
new file mode 100644
index 0000000000..7d4d1f2767
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm6150_thermal: pm6150-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6150_temp>;
+
+			trips {
+				pm6150_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pm6150_crit: crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm6150_lsid0: pmic@0 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm6150_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm6150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6150_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm6150_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm6150_gpios: gpio@c000 {
+			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6150_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm6150_lsid1: pmic@1 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
new file mode 100644
index 0000000000..d13a1ab7c2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm6150l-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm6150l_lsid4: pmic@4 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6150l_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+		};
+
+		pm6150l_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm6150l_gpios: gpio@c000 {
+			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6150l_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm6150l_lsid5: pmic@5 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150l_flash: led-controller@d300 {
+			compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
+		pm6150l_wled: leds@d800 {
+			compatible = "qcom,pm6150l-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi
new file mode 100644
index 0000000000..3a2a841e83
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm6350-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6350_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm6350", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6350_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm6350_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm6350_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm6350_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6350_gpios: gpio@c000 {
+			compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6350_gpios 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm6350", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
new file mode 100644
index 0000000000..98dc04962f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm660-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm660_temp>;
+
+			trips {
+				pm660_alert0: pm660-alert0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm660_crit: pm660-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm660", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+
+				status = "disabled";
+			};
+		};
+
+		pm660_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm660_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm660_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@4c {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "xo_therm";
+			};
+
+			channel@4d {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "msm_therm";
+			};
+
+			channel@4e {
+				reg = <ADC5_AMUX_THM2_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "emmc_therm";
+			};
+
+			channel@4f {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "pa_therm0";
+			};
+
+			channel@50 {
+				reg = <ADC5_AMUX_THM4_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "pa_therm1";
+			};
+
+			channel@51 {
+				reg = <ADC5_AMUX_THM5_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "quiet_therm";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@85 {
+				reg = <ADC5_VCOIN>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 3>;
+				label = "vcoin";
+			};
+		};
+
+		pm660_gpios: gpio@c000 {
+			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm660_gpios 0 0 13>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm660", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660_spmi_regulators: regulators {
+			compatible = "qcom,pm660-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
new file mode 100644
index 0000000000..6fdbf507c2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm660l-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm660l_temp>;
+
+			trips {
+				pm660l_alert0: pm660l-alert0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm660l_crit: pm660l-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm660l_gpios: gpio@c000 {
+			compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm660l_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660l_lpg: pwm {
+			compatible = "qcom,pm660l-lpg";
+
+			status = "disabled";
+		};
+
+		pm660l_wled: leds@d800 {
+			compatible = "qcom,pm660l-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+
+		pm660l_spmi_regulators: regulators {
+			compatible = "qcom,pm660l-regulators";
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
new file mode 100644
index 0000000000..e8540c36bd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm7250b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm7250b_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pm7250b", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm7250b_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm7250b_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm7250b_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@2 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@7 {
+				reg = <ADC5_USB_IN_I>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_in_i_uv";
+			};
+
+			channel@8 {
+				reg = <ADC5_USB_IN_V_16>;
+				qcom,pre-scaling = <1 16>;
+				label = "usb_in_v_div_16";
+			};
+
+			channel@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+
+			channel@e {
+				reg = <ADC5_AMUX_THM2>;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "smb1390_therm";
+			};
+
+			channel@1e {
+				reg = <ADC5_MID_CHG_DIV6>;
+				qcom,pre-scaling = <1 6>;
+				label = "chg_mid";
+			};
+
+			channel@4b {
+				reg = <ADC5_BAT_ID_100K_PU>;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				label = "bat_id";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@84 {
+				reg = <ADC5_VBAT_SNS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vbat_sns";
+			};
+
+			channel@99 {
+				reg = <ADC5_SBUx>;
+				qcom,pre-scaling = <1 3>;
+				label = "chg_sbux";
+			};
+		};
+
+		pm7250b_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm7250b_gpios: pinctrl@c000 {
+			compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm7250b_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pm7250b", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi
new file mode 100644
index 0000000000..d1c5476af5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm7325: pmic@1 {
+		compatible = "qcom,pm7325", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm7325_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm7325_gpios: gpio@8800 {
+			compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm7325_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+&thermal_zones {
+	pm7325_thermal: pm7325-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+		thermal-sensors = <&pm7325_temp_alarm>;
+
+		trips {
+			pm7325_trip0: trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pm7325_crit: pm7325-crit {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm7550ba.dtsi b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi
new file mode 100644
index 0000000000..8b00ece987
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm7550ba-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm7550ba_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm7550ba: pmic@7 {
+		compatible = "qcom,pm7550ba", "qcom,spmi-pmic";
+		reg = <7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm7550ba_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm7550ba_gpios: gpio@8800 {
+			compatible = "qcom,pm7550ba-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm7550ba_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm7550ba_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,pm7550ba-eusb2-repeater", "qcom,pm8550b-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi
new file mode 100644
index 0000000000..532b79acf0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pm8004_lsid4: pmic@4 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pm8004_lsid5: pmic@5 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8004_spmi_regulators: regulators {
+			compatible = "qcom,pm8004-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
new file mode 100644
index 0000000000..0f0ab2da83
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&spmi_bus {
+	pm8005_lsid0: pmic@4 {
+		compatible = "qcom,pm8005", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8005_gpios: gpio@c000 {
+			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8005_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pm8005_lsid1: pmic@5 {
+		compatible = "qcom,pm8005", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8005_regulators: regulators {
+			compatible = "qcom,pm8005-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi
new file mode 100644
index 0000000000..0c2c424be0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@a {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8009_pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+		};
+
+		pm8009_gpios: gpio@c000 {
+			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8009_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@b {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi
new file mode 100644
index 0000000000..0ea641e122
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8010-m-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8010_m_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8010-n-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8010_n_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8010_m: pmic@c {
+		compatible = "qcom,pm8010", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8010_m_temp_alarm: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	pm8010_n: pmic@d {
+		compatible = "qcom,pm8010", "qcom,spmi-pmic";
+		reg = <0xd SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8010_n_temp_alarm: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
new file mode 100644
index 0000000000..3ba3ba5d8f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+/ {
+	thermal-zones {
+		pm8150-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8150_0: pmic@0 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+
+				status = "disabled";
+			};
+		};
+
+		pm8150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pm8150_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
+		pm8150_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8150_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
new file mode 100644
index 0000000000..2b9123df58
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8150b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150b_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pm8150b", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pm8150b_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm8150b-vbus-reg";
+			status = "disabled";
+			reg = <0x1100>;
+		};
+
+		pm8150b_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150b_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+		};
+
+		pm8150b_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm8150b_gpios: gpio@c000 {
+			compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8150b_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pm8150b", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8150b_lpg: pwm {
+			compatible = "qcom,pm8150b-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
new file mode 100644
index 0000000000..b1686e5777
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8150l-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@4 {
+		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pm8150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150l_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150l_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pm8150l_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm8150l_gpios: gpio@c000 {
+			compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8150l_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@5 {
+		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8150l_flash: led-controller@d300 {
+			compatible = "qcom,pm8150l-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
+		pm8150l_lpg: pwm {
+			compatible = "qcom,pm8150l-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi
new file mode 100644
index 0000000000..9ed9ba23e8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8350_thermal: pm8350-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8350_temp_alarm>;
+
+			trips {
+				pm8350_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pm8350_crit: pm8350c-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8350: pmic@1 {
+		compatible = "qcom,pm8350", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8350_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8350_gpios: gpio@8800 {
+			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8350_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
new file mode 100644
index 0000000000..05c1058988
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8350b_thermal: pm8350b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8350b_temp_alarm>;
+
+			trips {
+				pm8350b_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pm8350b_crit: pm8350c-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8350b: pmic@3 {
+		compatible = "qcom,pm8350b", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8350b_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8350b_gpios: gpio@8800 {
+			compatible = "qcom,pm8350b-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8350b_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
new file mode 100644
index 0000000000..f28e71487d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm8350c: pmic@2 {
+		compatible = "qcom,pm8350c", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8350c_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8350c_gpios: gpio@8800 {
+			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8350c_gpios 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8350c_pwm: pwm {
+			compatible = "qcom,pm8350c-pwm";
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+	};
+};
+
+/ {
+	thermal-zones {
+		pm8350c_thermal: pm8350c-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8350c_temp_alarm>;
+
+			trips {
+				pm8350c_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pm8350c_crit: pm8350c-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8450.dtsi b/arch/arm64/boot/dts/qcom/pm8450.dtsi
new file mode 100644
index 0000000000..ae5bce3cf4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8450.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8450-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8450_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8450: pmic@7 {
+		compatible = "qcom,pm8450", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8450_gpios: gpio@8800 {
+			compatible = "qcom,pm8450-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8450_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
new file mode 100644
index 0000000000..db3d5c17a7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8550-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8550: pmic@1 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550_gpios: gpio@8800 {
+			compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8550_flash: led-controller@ee00 {
+			compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led";
+			reg = <0xee00>;
+			status = "disabled";
+		};
+
+		pm8550_pwm: pwm {
+			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
new file mode 100644
index 0000000000..72609f31c8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8550b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550b_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8550b: pmic@7 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550b_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550b_gpios: gpio@8800 {
+			compatible = "qcom,pm8550b-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550b_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8550b_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,pm8550b-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
new file mode 100644
index 0000000000..c47646a467
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8550ve-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550ve_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8550ve: pmic@5 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
new file mode 100644
index 0000000000..97b1c18aa7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8550vs-c-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550vs_c_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550vs-d-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550vs_d_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550vs-e-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550vs_e_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550vs-g-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550vs_g_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8550vs_c: pmic@2 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_c_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_c_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_c_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550vs_d: pmic@3 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_d_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_d_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_d_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550vs_e: pmic@4 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_e_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_e_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_e_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550vs_g: pmic@6 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_g_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_g_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_g_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
new file mode 100644
index 0000000000..223442f909
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pm8916_0: pmic@0 {
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8916_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+
+			watchdog {
+				compatible = "qcom,pm8916-wdt";
+				interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+				timeout-sec = <60>;
+			};
+		};
+
+		pm8916_usbin: usb-detect@1300 {
+			compatible = "qcom,pm8941-misc";
+			reg = <0x1300>;
+			interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "usb_vbus";
+			status = "disabled";
+		};
+
+		pm8916_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8916_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <VADC_USBIN>;
+				qcom,pre-scaling = <1 10>;
+			};
+			channel@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+			};
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+			};
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+			};
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8916_mpps: mpps@a000 {
+			compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8916_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8916_gpios: gpio@c000 {
+			compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8916_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8916_1: pmic@1 {
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8916_pwm: pwm {
+			compatible = "qcom,pm8916-pwm";
+
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8916_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+
+		pm8916_codec: audio-codec@f000 {
+			compatible = "qcom,pm8916-wcd-analog-codec";
+			reg = <0xf000>;
+			reg-names = "pmic-codec-core";
+			clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "mclk";
+			interrupt-parent = <&spmi_bus>;
+			interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+			interrupt-names = "cdc_spk_cnp_int",
+					  "cdc_spk_clip_int",
+					  "cdc_spk_ocp_int",
+					  "mbhc_ins_rem_det1",
+					  "mbhc_but_rel_det",
+					  "mbhc_but_press_det",
+					  "mbhc_ins_rem_det",
+					  "mbhc_switch_int",
+					  "cdc_ear_ocp_int",
+					  "cdc_hphr_ocp_int",
+					  "cdc_hphl_ocp_det",
+					  "cdc_ear_cnp_int",
+					  "cdc_hphr_cnp_int",
+					  "cdc_hphl_cnp_int";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
new file mode 100644
index 0000000000..f03095779d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm8950_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8950_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8950_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@5 {
+				reg = <VADC_VCOIN>;
+				qcom,pre-scaling = <1 1>;
+				label = "vcoin";
+			};
+
+			channel@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 1>;
+				label = "vph_pwr";
+			};
+
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_625mv";
+			};
+
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_1250mv";
+			};
+
+			channel@c {
+				reg = <VADC_SPARE1>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_buf_625mv";
+			};
+
+			channel@e {
+				reg = <VADC_GND_REF>;
+				label = "ref_gnd";
+			};
+
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+				label = "ref_vdd";
+			};
+
+			channel@11 {
+				reg = <VADC_P_MUX2_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "pa_therm1";
+			};
+
+			channel@13 {
+				reg = <VADC_P_MUX4_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "case_therm";
+			};
+
+			channel@32 {
+				reg = <VADC_LR_MUX3_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "xo_therm";
+			};
+
+			channel@36 {
+				reg = <VADC_LR_MUX7_HW_ID>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "pa_therm0";
+			};
+
+			channel@3c {
+				reg = <VADC_LR_MUX3_BUF_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "xo_therm_buf";
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
+		pm8950_mpps: mpps@a000 {
+			compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8950_gpios: gpio@c000 {
+			compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8950_spmi_regulators: regulators {
+			compatible = "qcom,pm8950-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi
new file mode 100644
index 0000000000..1067e141be
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8953-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8953_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8953", "qcom,spmi-pmic";
+		reg = <0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8953_pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8953_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8953_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8953_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8953_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x00 0x31 0x00 0x01>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+			};
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+			};
+			channel@c {
+				reg = <VADC_SPARE1>;
+			};
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8953_gpios: gpio@c000 {
+			compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8953_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8953", "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
new file mode 100644
index 0000000000..d44a95caf0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8994-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm8994_temp>;
+
+			trips {
+				pm8994_alert0: pm8994-alert0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm8994_crit: pm8994-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8994_pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8994_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8994_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8994_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8994_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+				label = "die_temp";
+			};
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+				label = "ref_625mv";
+			};
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+				label = "ref_1250mv";
+			};
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		pm8994_gpios: gpio@c000 {
+			compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8994_gpios 0 0 22>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8994_mpps: mpps@a000 {
+			compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8994_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8994_lpg: pwm {
+			compatible = "qcom,pm8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8994_spmi_regulators: regulators {
+			compatible = "qcom,pm8994-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
new file mode 100644
index 0000000000..3f82715392
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm8998-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm8998_temp>;
+
+			trips {
+				pm8998_alert0: pm8998-alert0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm8998_crit: pm8998-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8998_lsid0: pmic@0 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8998_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm8998_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8998_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8998_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8998_coincell: charger@2800 {
+			compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";
+			reg = <0x2800>;
+
+			status = "disabled";
+		};
+
+		pm8998_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm8998_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm-hc";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8998_gpios: gpio@c000 {
+			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8998_gpios 0 0 26>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pm8998_lsid1: pmic@1 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
new file mode 100644
index 0000000000..4eb79e0ce4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmi632-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmi632_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pmi632", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi632_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmi632_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@7 {
+				reg = <ADC5_USB_IN_I>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_in_i_uv";
+			};
+
+			channel@8 {
+				reg = <ADC5_USB_IN_V_16>;
+				qcom,pre-scaling = <1 16>;
+				label = "usb_in_v_div_16";
+			};
+
+			channel@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+
+			channel@4b {
+				reg = <ADC5_BAT_ID_100K_PU>;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				label = "bat_id";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@84 {
+				reg = <ADC5_VBAT_SNS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vbat_sns";
+			};
+		};
+
+		pmi632_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmi632_sdam_7: nvram@b600 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0xb600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xb600 0x100>;
+		};
+
+		pmi632_gpios: gpio@c000 {
+			compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi632_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi632", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi632_lpg: pwm {
+			compatible = "qcom,pmi632-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
new file mode 100644
index 0000000000..1029f3b1bb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <VADC_USBIN>;
+				qcom,pre-scaling = <1 4>;
+				label = "usbin";
+			};
+
+			channel@1 {
+				reg = <VADC_DCIN>;
+				qcom,pre-scaling = <1 4>;
+				label = "dcin";
+			};
+
+			channel@2 {
+				reg = <VADC_VCHG_SNS>;
+				qcom,pre-scaling = <1 1>;
+				label = "vchg_sns";
+			};
+
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_625mv";
+			};
+
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_1250mv";
+			};
+
+			channel@d {
+				reg = <VADC_SPARE2>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+		};
+
+		pmi8950_mpps: mpps@a000 {
+			compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8950_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmi8950_gpios: gpio@c000 {
+			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8950_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_wled: leds@d800 {
+			compatible = "qcom,pmi8950-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
new file mode 100644
index 0000000000..36d6a1fb55
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8994_gpios: gpio@c000 {
+			compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8994_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmi8994_mpps: mpps@a000 {
+			compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8994_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8994_lpg: pwm {
+			compatible = "qcom,pmi8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pmi8994_spmi_regulators: regulators {
+			compatible = "qcom,pmi8994-regulators";
+		};
+
+		pmi8994_wled: wled@d800 {
+			compatible = "qcom,pmi8994-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			qcom,cabc;
+			qcom,external-pfet;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8996.dtsi b/arch/arm64/boot/dts/qcom/pmi8996.dtsi
new file mode 100644
index 0000000000..31b47209e2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8996.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+ /*
+  * PMI8996 is a slight modification of PMI8994 with
+  * some notable changes, like being the first PMIC
+  * whose the bootloader has to check to continue booting
+  * and a change to a LABIBB parameter.
+  */
+
+/ {
+	qcom,pmic-id = <0x20009 0x10013 0 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
new file mode 100644
index 0000000000..cd3f0790fd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmi8998_lsid0: pmic@2 {
+		compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8998_charger: charger@1000 {
+			compatible = "qcom,pmi8998-charger";
+			reg = <0x1000>;
+
+			interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "usb-plugin",
+					  "bat-ov",
+					  "wdog-bark",
+					  "usbin-icl-change";
+
+			io-channels = <&pmi8998_rradc 3>,
+				      <&pmi8998_rradc 4>;
+			io-channel-names = "usbin_i", "usbin_v";
+
+			status = "disabled";
+		};
+
+		pmi8998_gpios: gpio@c000 {
+			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8998_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmi8998_rradc: adc@4500 {
+			compatible = "qcom,pmi8998-rradc";
+			reg = <0x4500>;
+			#io-channel-cells = <1>;
+		};
+	};
+
+	pmi8998_lsid1: pmic@3 {
+		compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		labibb {
+			compatible = "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "sc-err", "ocp";
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-names = "sc-err", "ocp";
+			};
+		};
+
+		pmi8998_lpg: pwm {
+			compatible = "qcom,pmi8998-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pmi8998_flash: led-controller@d300 {
+			compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
+		pmi8998_wled: leds@d800 {
+			compatible = "qcom,pmi8998-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
new file mode 100644
index 0000000000..1eb7401706
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/* (Sadly) this PMIC can be configured to be at different SIDs */
+#ifndef PMK8350_SID
+	#define PMK8350_SID 0
+#endif
+
+/ {
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&reboot_reason>;
+		nvmem-cell-names = "reboot-mode";
+		mode-recovery = <0x01>;
+		mode-bootloader = <0x02>;
+	};
+};
+	
+&spmi_bus {
+	pmk8350: pmic@PMK8350_SID {
+		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
+		reg = <PMK8350_SID SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmk8350_pon: pon@1300 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8350_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#io-channel-cells = <1>;
+		};
+
+		pmk8350_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm5-gen2";
+			reg = <0x3400>;
+			interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8350_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		pmk8350_sdam_2: nvram@7100 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7100 0x100>;
+
+			reboot_reason: reboot-reason@48 {
+				reg = <0x48 0x1>;
+				bits = <1 7>;
+			};
+		};
+
+		pmk8350_gpios: gpio@b000 {
+			compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
+			reg = <0xb000>;
+			gpio-controller;
+			gpio-ranges = <&pmk8350_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
new file mode 100644
index 0000000000..c7ac9b2eaa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&reboot_reason>;
+		nvmem-cell-names = "reboot-mode";
+		mode-recovery = <0x01>;
+		mode-bootloader = <0x02>;
+	};
+};
+
+&spmi_bus {
+	pmk8550: pmic@0 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmk8550_pon: pon@1300 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8550_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pmk8550_sdam_2: nvram@7100 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7100 0x100>;
+
+			reboot_reason: reboot-reason@48 {
+				reg = <0x48 0x1>;
+				bits = <1 7>;
+			};
+		};
+
+		pmk8550_gpios: gpio@8800 {
+			compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
+			reg = <0xb800>;
+			gpio-controller;
+			gpio-ranges = <&pmk8550_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
new file mode 100644
index 0000000000..dbd4b91dfe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+/ {
+	thermal-zones {
+		pmm8155au-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmm8155au_1_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+
+				status = "disabled";
+			};
+		};
+
+		pmm8155au_1_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmm8155au_1_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8155au_1_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pmm8155au_1_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmm8155au_1_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+
+			status = "disabled";
+		};
+
+		pmm8155au_1_gpios: gpio@c000 {
+			compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm8155au_1_gpios 0 0 10>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
new file mode 100644
index 0000000000..1cee20ac2c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmm8155au-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmm8155au_2_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@4 {
+		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pmm8155au_2_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmm8155au_2_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8155au_2_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pmm8155au_2_gpios: gpio@c000 {
+			compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm8155au_2_gpios 0 0 10>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@5 {
+		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmp8074.dtsi b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
new file mode 100644
index 0000000000..0d0a846ac8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmp8074_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@2 {
+				reg = <ADC5_VREF_VADC>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_vadc";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmic_die";
+			};
+
+			channel@76 {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "xo_therm";
+			};
+
+			channel@77 {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm1";
+			};
+
+			channel@78 {
+				reg = <ADC5_AMUX_THM2_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm2";
+			};
+
+			channel@79 {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm3";
+			};
+
+			channel@131 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+		};
+
+		pmp8074_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			allow-set-time;
+			status = "disabled";
+		};
+
+		pmp8074_gpios: gpio@c000 {
+			compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmp8074_gpios 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+
+		regulators {
+			compatible = "qcom,pmp8074-regulators";
+
+			s3: s3 {
+				regulator-name = "vdd_s3";
+				regulator-min-microvolt = <592000>;
+				regulator-max-microvolt = <1064000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			s4: s4 {
+				regulator-name = "vdd_s4";
+				regulator-min-microvolt = <712000>;
+				regulator-max-microvolt = <992000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			l11: l11 {
+				regulator-name = "l11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
new file mode 100644
index 0000000000..febda50779
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmr735a: pmic@4 {
+		compatible = "qcom,pmr735a", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735a_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735a_gpios: gpio@8800 {
+			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735a_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+/ {
+	thermal-zones {
+		pmr735a_thermal: pmr735a-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmr735a_temp_alarm>;
+
+			trips {
+				pmr735a_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pmr735a_crit: pmr735a-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
new file mode 100644
index 0000000000..f7473e2473
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmr735b_thermal: pmr735b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmr735b_temp_alarm>;
+
+			trips {
+				pmr735b_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pmr735b_crit: pmr735a-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmr735b: pmic@5 {
+		compatible = "qcom,pmr735b", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735b_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735b_gpios: gpio@8800 {
+			compatible = "qcom,pmr735b-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735b_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d.dtsi
new file mode 100644
index 0000000000..41fb664a10
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmr735d.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmr735d-k-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmr735d_k_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmr735d-l-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmr735d_l_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pmr735d_k: pmic@a {
+		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735d_k_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735d_k_gpios: gpio@8800 {
+			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735d_k_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmr735d_l: pmic@b {
+		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735d_l_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735d_l_gpios: gpio@8800 {
+			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735d_l_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
new file mode 100644
index 0000000000..461ad97032
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pms405-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pms405_temp>;
+
+			trips {
+				pms405_alert0: pms405-alert0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pms405_crit: pms405-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pms405_0: pms405@0 {
+		compatible = "qcom,pms405", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pms405_gpios: gpio@c000 {
+			compatible = "qcom,pms405-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pms405_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pon@800 {
+			compatible = "qcom,pms405-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pms405_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pms405_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pms405_adc: adc@3100 {
+			compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@131 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@77 {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm1";
+			};
+
+			channel@79 {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm3";
+			};
+
+			channel@76 {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "xo_therm";
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	pms405_1: pms405@1 {
+		compatible = "qcom,pms405", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+
+		pms405_spmi_regulators: regulators {
+			compatible = "qcom,pms405-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmx75.dtsi b/arch/arm64/boot/dts/qcom/pmx75.dtsi
new file mode 100644
index 0000000000..373e45f63d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmx75.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmx75-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmx75_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmx75: pmic@1 {
+		compatible = "qcom,pmx75", "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmx75_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmx75_gpios: gpio@8800 {
+			compatible = "qcom,pmx75-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmx75_gpios 0 0 16>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
new file mode 100644
index 0000000000..d46e591e72
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -0,0 +1,1653 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ *
+ * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000043>;
+				entry-latency-us = <800>;
+				exit-latency-us = <2118>;
+				min-residency-us = <7376>;
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <290>;
+				exit-latency-us = <376>;
+				min-residency-us = <1182>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-qcm2290", "qcom,scm";
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x40000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-qcm2290";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,qcm2290-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_min_svs: opp1 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp2 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp4 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp5 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp7 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: xbl-aop@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: sec-apps@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: smem@46000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		pil_modem_mem: modem@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x6900000>;
+			no-map;
+		};
+
+		pil_video_mem: video@51400000 {
+			reg = <0x0 0x51400000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@51900000 {
+			reg = <0x0 0x51900000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_adsp_mem: adsp@51a00000 {
+			reg = <0x0 0x51a00000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: ipa-fw@53600000 {
+			reg = <0x0 0x53600000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: ipa-gsi@53610000 {
+			reg = <0x0 0x53610000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: zap@53615000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x53615000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_memory: framebuffer@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_memory: dpfs-data@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		removed_mem: reserved@60000000 {
+			reg = <0x0 0x60000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@89b01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x89b01000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,qcm2290-tlmm";
+			reg = <0x0 0x00500000 0x0 0x300000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 127>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart0_default: qup-uart0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-qcm2290";
+			reg = <0x0 0x01400000 0x0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_hsphy: phy@1613000 {
+			compatible = "qcom,qcm2290-qusb2-phy";
+			reg = <0x0 0x01613000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,qcm2290-qmp-usb3-phy";
+			reg = <0x0 0x01615000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		qfprom@1b44000 {
+			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
+			reg = <0x0 0x01b44000 0x0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x01c40000 0x0 0x1100>,
+			      <0x0 0x01e00000 0x0 0x2000000>,
+			      <0x0 0x03e00000 0x0 0x100000>,
+			      <0x0 0x03f00000 0x0 0xa0000>,
+			      <0x0 0x01c0a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x04411000 0x0 0x1ff>,
+			      <0x0 0x04410000 0x0 0x8>;
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		rng: rng@4453000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x0 0x04453000 0x0 0x1000>;
+			clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
+			clock-names = "core";
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x0 0x045f0000 0x0 0x7000>;
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x0 0x04690000 0x0 0x10000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04744000 0x0 0x1000>,
+			      <0x0 0x04745000 0x0 0x1000>,
+			      <0x0 0x04748000 0x0 0x8000>;
+			reg-names = "hc",
+				    "cqhci",
+				    "ice";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo",
+				      "ice";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			iommus = <&apps_smmu 0xc0 0x0>;
+
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040868>;
+			bus-width = <8>;
+
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04784000 0x0 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0xa0 0x0>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x04a00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0xe3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c0_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart0: serial@4a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@4a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb: usb@4ef8800 {
+			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
+			reg = <0x0 0x04ef8800 0x0 0x400>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			wakeup-source;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x04e00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				iommus = <&apps_smmu 0x120 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				maximum-speed = "super-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		remoteproc_mpss: remoteproc@6080000 {
+			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
+			reg = <0x0 0x06080000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 12>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@ab00000 {
+			compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
+			reg = <0x0 0x0ab00000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
+					<&rpmpd QCM2290_VDD_LPI_MX>;
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 8>;
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x0c600000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x0 0x0c800000 0x0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x1a0 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		watchdog@f017000 {
+			compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
+			reg = <0x0 0x0f017000 0x0 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sleep_clk>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,qcm2290-apcs-hmss-global";
+			reg = <0x0 0x0f111000 0x0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x0f120000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x0f121000 0x8000>;
+
+			frame@0 {
+				reg = <0x0 0x1000>,
+				      <0x1000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@2000 {
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@3000 {
+				reg = <0x3000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@4000 {
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@5000 {
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@6000 {
+				reg = <0x6000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@7000 {
+				reg = <0x7000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,
+			      <0x0 0x0f300000 0x0 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		cpufreq_hw: cpufreq@f521000 {
+			compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0x0 0x0f521000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		mapss-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				mapss_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss_crit: mapss-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wlan_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wlan_crit: wlan-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_crit: cpuss0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				mdm0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm0_crit: mdm0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				mdm1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm1_crit: mdm1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		hm-center-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				hm_center_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				hm_center_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				hm_center_crit: hm-center-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_crit: camera-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
new file mode 100644
index 0000000000..fc29b194cd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "qcs404-evb.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+	compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb",
+		     "qcom,qcs404";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
new file mode 100644
index 0000000000..358827c2fb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "qcs404-evb.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
+	compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb",
+		     "qcom,qcs404";
+};
+
+&ethernet {
+	status = "okay";
+
+	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 10000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_defaults>;
+
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x4>;
+		};
+	};
+};
+
+&tlmm {
+	ethernet_defaults: ethernet-defaults-state {
+		int-pins {
+			pins = "gpio61";
+			function = "rgmii_int";
+			bias-disable;
+			drive-strength = <2>;
+		};
+		mdc-pins {
+			pins = "gpio76";
+			function = "rgmii_mdc";
+			bias-pull-up;
+		};
+		mdio-pins {
+			pins = "gpio75";
+			function = "rgmii_mdio";
+			bias-pull-up;
+		};
+		tx-pins {
+			pins = "gpio67", "gpio66", "gpio65", "gpio64";
+			function = "rgmii_tx";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+		rx-pins {
+			pins = "gpio73", "gpio72", "gpio71", "gpio70";
+			function = "rgmii_rx";
+			bias-disable;
+			drive-strength = <2>;
+		};
+		tx-ctl-pins {
+			pins = "gpio68";
+			function = "rgmii_ctl";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+		rx-ctl-pins {
+			pins = "gpio74";
+			function = "rgmii_ctl";
+			bias-disable;
+			drive-strength = <2>;
+		};
+		tx-ck-pins {
+			pins = "gpio63";
+			function = "rgmii_ck";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+		rx-ck-pins {
+			pins = "gpio69";
+			function = "rgmii_ck";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
new file mode 100644
index 0000000000..1065540152
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "qcs404.dtsi"
+#include "pms405.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_ch0_3p3:
+	vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "eSMPS3_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	usb3_vbus_reg: regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_BOOST_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_vbus_boost_pin>;
+		vin-supply = <&vph_pwr>;
+		enable-active-high;
+
+		/* TODO: Drop this when introducing role switching */
+		regulator-always-on;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+		vddio-supply = <&vreg_l6_1p8>;
+		vddxo-supply = <&vreg_l5_1p8>;
+		vddrf-supply = <&vreg_l1_1p3>;
+		vddch0-supply = <&vdd_ch0_3p3>;
+
+		local-bd-address = [ 02 00 00 00 5a ad ];
+
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_dma {
+	qcom,controlled-remotely;
+};
+
+&blsp2_dma {
+	qcom,controlled-remotely;
+};
+
+&gcc {
+	protected-clocks = <GCC_BIMC_CDSP_CLK>,
+			   <GCC_CDSP_CFG_AHB_CLK>,
+			   <GCC_CDSP_BIMC_CLK_SRC>,
+			   <GCC_CDSP_TBU_CLK>,
+			   <141>, /* GCC_WCSS_Q6_AHB_CLK */
+			   <142>; /* GCC_WCSS_Q6_AXIM_CLK */
+};
+
+&pms405_spmi_regulators {
+	vdd_s3-supply = <&vph_pwr>;
+
+	pms405_s3: s3 {
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vdd_apc";
+		regulator-initial-mode = <1>;
+		regulator-min-microvolt = <1048000>;
+		regulator-max-microvolt = <1384000>;
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&perst_state>;
+};
+
+&pcie_phy {
+	status = "okay";
+
+	vdda-vp-supply = <&vreg_l3_1p05>;
+	vdda-vph-supply = <&vreg_l5_1p8>;
+};
+
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+};
+
+&remoteproc_wcss {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pms405-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_l1_l2-supply = <&vreg_s5_1p35>;
+		vdd_l3_l8-supply = <&vreg_s5_1p35>;
+		vdd_l4-supply = <&vreg_s5_1p35>;
+		vdd_l5_l6-supply = <&vreg_s4_1p8>;
+		vdd_l7-supply = <&vph_pwr>;
+		vdd_l9-supply = <&vreg_s5_1p35>;
+		vdd_l10_l11_l12_l13-supply = <&vph_pwr>;
+
+		vreg_s4_1p8: s4 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1920000>;
+		};
+
+		vreg_s5_1p35: s5 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1_1p3: l1 {
+			regulator-min-microvolt = <1240000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l2_1p275: l2 {
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1280000>;
+		};
+
+		vreg_l3_1p05: l3 {
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1160000>;
+		};
+
+		vreg_l4_1p2: l4 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		vreg_l5_1p8: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l6_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_l7_1p8: l7 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		vreg_l8_1p2: l8 {
+			regulator-min-microvolt = <1136000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l10_3p3: l10 {
+			regulator-min-microvolt = <2936000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l11_sdc2: l11 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l12_3p3: l12 {
+			regulator-min-microvolt = <3050000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l13_3p3: l13 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+&sdcc1 {
+	status = "okay";
+
+	supports-cqe;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	non-removable;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&tlmm {
+	perst_state: perst-state {
+		pins = "gpio43";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	usb3_id_pin: usb3-id-state {
+		pins = "gpio116";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&pms405_gpios {
+	usb_vbus_boost_pin: usb-vbus-boost-state {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <1>;
+		};
+	};
+	usb3_vbus_pin: usb3-vbus-state {
+		pinconf {
+			pins = "gpio12";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			power-source = <1>;
+		};
+	};
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb2_phy_sec {
+	vdd-supply = <&vreg_l4_1p2>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	vdda3p3-supply = <&vreg_l12_3p3>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+
+};
+
+&usb3_dwc3 {
+	dr_mode = "host";
+};
+
+&usb2_phy_prim {
+	vdd-supply = <&vreg_l4_1p2>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	vdda3p3-supply = <&vreg_l12_3p3>;
+	status = "okay";
+};
+
+&usb3_phy {
+	vdd-supply = <&vreg_l3_1p05>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
+	vdd-1.8-xo-supply = <&vreg_l5_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l1_1p3>;
+};
+
+/* PINCTRL - additions to nodes defined in qcs404.dtsi */
+
+&blsp1_uart2_default {
+	rx-pins {
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tx-pins {
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&blsp1_uart3_default {
+	cts-pins {
+		bias-disable;
+	};
+
+	rts-tx-pins {
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rx-pins {
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
new file mode 100644
index 0000000000..2721f32dfb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -0,0 +1,1829 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-qcs404.h>
+#include <dt-bindings/clock/qcom,turingcc-qcs404.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <125>;
+				exit-latency-us = <180>;
+				min-residency-us = <595>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&cpr_opp1>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			required-opps = <&cpr_opp2>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			required-opps = <&cpr_opp3>;
+		};
+	};
+
+	cpr_opp_table: opp-table-cpr {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <2>;
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <3>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-qcs404", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-qcs404";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,qcs404-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <16>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <32>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <48>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <64>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <128>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <192>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <256>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <320>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <384>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <416>;
+						};
+
+						rpmpd_opp_turbo_plus: opp11 {
+							opp-level = <512>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_apps_mem: memory@85900000 {
+			reg = <0 0x85900000 0 0x500000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		smem_region: memory@85f00000 {
+			reg = <0 0x85f00000 0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86100000 {
+			reg = <0 0x86100000 0 0x300000>;
+			no-map;
+		};
+
+		wlan_fw_mem: memory@86400000 {
+			reg = <0 0x86400000 0 0x1100000>;
+			no-map;
+		};
+
+		adsp_fw_mem: memory@87500000 {
+			reg = <0 0x87500000 0 0x1a00000>;
+			no-map;
+		};
+
+		cdsp_fw_mem: memory@88f00000 {
+			reg = <0 0x88f00000 0 0x600000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@89500000 {
+			reg = <0 0x89500000 0 0x100000>;
+			no-map;
+		};
+
+		uefi_mem: memory@9f800000 {
+			reg = <0 0x9f800000 0 0x800000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		turingcc: clock-controller@800000 {
+			compatible = "qcom,qcs404-turingcc";
+			reg = <0x00800000 0x30000>;
+			clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x6000>;
+		};
+
+		usb3_phy: phy@78000 {
+			compatible = "qcom,usb-ss-28nm-phy";
+			reg = <0x00078000 0x400>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "ref", "ahb", "pipe";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "com", "phy";
+			status = "disabled";
+		};
+
+		usb2_phy_prim: phy@7a000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0007a000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+				 <&gcc GCC_USB2A_PHY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		usb2_phy_sec: phy@7c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0007c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,qcs404-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cpr_efuse_speedbin: speedbin@13c {
+				reg = <0x13c 0x4>;
+				bits = <2 3>;
+			};
+
+			tsens_s0_p1: s0-p1@1f8 {
+				reg = <0x1f8 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s0_p2: s0-p2@1f8 {
+				reg = <0x1f8 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s1_p1: s1-p1@1f9 {
+				reg = <0x1f9 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@1fa {
+				reg = <0x1fa 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p1: s2-p1@1fb {
+				reg = <0x1fb 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2: s2-p2@1fb {
+				reg = <0x1fb 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p1: s3-p1@1fc {
+				reg = <0x1fc 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p2: s3-p2@1fd {
+				reg = <0x1fd 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1: s4-p1@1fe {
+				reg = <0x1fe 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s4_p2: s4-p2@1fe {
+				reg = <0x1fe 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s5_p1: s5-p1@200 {
+				reg = <0x200 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p2: s5-p2@200 {
+				reg = <0x200 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@201 {
+				reg = <0x201 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s6_p2: s6-p2@202 {
+				reg = <0x202 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s7_p1: s7-p1@203 {
+				reg = <0x203 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@203 {
+				reg = <0x203 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p1: s8-p1@204 {
+				reg = <0x204 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s8_p2: s8-p2@205 {
+				reg = <0x205 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s9_p1: s9-p1@206 {
+				reg = <0x206 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p2: s9-p2@206 {
+				reg = <0x206 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_mode: mode@208 {
+				reg = <0x208 1>;
+				bits = <0 3>;
+			};
+
+			tsens_base1: base1@208 {
+				reg = <0x208 2>;
+				bits = <3 8>;
+			};
+
+			tsens_base2: base2@208 {
+				reg = <0x209 2>;
+				bits = <3 8>;
+			};
+
+			cpr_efuse_quot_offset1: qoffset1@231 {
+				reg = <0x231 0x4>;
+				bits = <4 7>;
+			};
+			cpr_efuse_quot_offset2: qoffset2@232 {
+				reg = <0x232 0x4>;
+				bits = <3 7>;
+			};
+			cpr_efuse_quot_offset3: qoffset3@233 {
+				reg = <0x233 0x4>;
+				bits = <2 7>;
+			};
+			cpr_efuse_init_voltage1: ivoltage1@229 {
+				reg = <0x229 0x4>;
+				bits = <4 6>;
+			};
+			cpr_efuse_init_voltage2: ivoltage2@22a {
+				reg = <0x22a 0x4>;
+				bits = <2 6>;
+			};
+			cpr_efuse_init_voltage3: ivoltage3@22b {
+				reg = <0x22b 0x4>;
+				bits = <0 6>;
+			};
+			cpr_efuse_quot1: quot1@22b {
+				reg = <0x22b 0x4>;
+				bits = <6 12>;
+			};
+			cpr_efuse_quot2: quot2@22d {
+				reg = <0x22d 0x4>;
+				bits = <2 12>;
+			};
+			cpr_efuse_quot3: quot3@230 {
+				reg = <0x230 0x4>;
+				bits = <0 12>;
+			};
+			cpr_efuse_ring1: ring1@228 {
+				reg = <0x228 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_ring2: ring2@228 {
+				reg = <0x228 0x4>;
+				bits = <4 3>;
+			};
+			cpr_efuse_ring3: ring3@229 {
+				reg = <0x229 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_revision: revision@218 {
+				reg = <0x218 0x4>;
+				bits = <3 3>;
+			};
+		};
+
+		rng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		bimc: interconnect@400000 {
+			reg = <0x00400000 0x80000>;
+			compatible = "qcom,qcs404-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				<&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2";
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcnoc: interconnect@500000 {
+			reg = <0x00500000 0x15080>;
+			compatible = "qcom,qcs404-pcnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+				<&rpmcc RPM_SMD_PNOC_A_CLK>;
+		};
+
+		snoc: interconnect@580000 {
+			reg = <0x00580000 0x23080>;
+			compatible = "qcom,qcs404-snoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				<&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		remoteproc_cdsp: remoteproc@b00000 {
+			compatible = "qcom,qcs404-cdsp-pas";
+			reg = <0x00b00000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			/*
+			 * If the node was using the PIL binding, then include properties:
+			 * clocks = <&xo_board>,
+			 *          <&gcc GCC_CDSP_CFG_AHB_CLK>,
+			 *          <&gcc GCC_CDSP_TBU_CLK>,
+			 *          <&gcc GCC_BIMC_CDSP_CLK>,
+			 *          <&turingcc TURING_WRAPPER_AON_CLK>,
+			 *          <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+			 *          <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+			 *          <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+			 * clock-names = "xo",
+			 *               "sway",
+			 *               "tbu",
+			 *               "bimc",
+			 *               "ahb_aon",
+			 *               "q6ss_slave",
+			 *               "q6ss_master",
+			 *               "q6_axim";
+			 * resets = <&gcc GCC_CDSP_RESTART>;
+			 * reset-names = "restart";
+			 * qcom,halt-regs = <&tcsr 0x19004>;
+			 */
+
+			memory-region = <&cdsp_fw_mem>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,remote-pid = <5>;
+				mboxes = <&apcs_glb 12>;
+
+				label = "cdsp";
+			};
+		};
+
+		usb3: usb@7678800 {
+			compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
+			reg = <0x07678800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "core", "iface", "sleep", "mock_utmi";
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+			status = "disabled";
+
+			usb3_dwc3: usb@7580000 {
+				compatible = "snps,dwc3";
+				reg = <0x07580000 0xcd00>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy_prim>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				dr_mode = "otg";
+			};
+		};
+
+		usb2: usb@79b8800 {
+			compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
+			reg = <0x079b8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
+				 <&gcc GCC_PCNOC_USB2_CLK>,
+				 <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "core", "iface", "sleep", "mock_utmi";
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+			status = "disabled";
+
+			usb@78c0000 {
+				compatible = "snps,dwc3";
+				reg = <0x078c0000 0xcc00>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy_sec>;
+				phy-names = "usb2-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				dr_mode = "peripheral";
+			};
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,qcs404-pinctrl";
+			reg = <0x01000000 0x200000>,
+			      <0x01300000 0x200000>,
+			      <0x07b00000 0x200000>;
+			reg-names = "south", "north", "east";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 120>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_i2c0_default: blsp1-i2c0-default-state {
+				pins = "gpio32", "gpio33";
+				function = "blsp_i2c0";
+			};
+
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
+				pins = "gpio24", "gpio25";
+				function = "blsp_i2c1";
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				sda-pins {
+					pins = "gpio19";
+					function = "blsp_i2c_sda_a2";
+				};
+
+				scl-pins {
+					pins = "gpio20";
+					function = "blsp_i2c_scl_a2";
+				};
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio84", "gpio85";
+				function = "blsp_i2c3";
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio117", "gpio118";
+				function = "blsp_i2c4";
+			};
+
+			blsp1_uart0_default: blsp1-uart0-default-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "blsp_uart0";
+			};
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_uart1";
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
+					pins = "gpio18";
+					function = "blsp_uart_rx_a2";
+				};
+
+				tx-pins {
+					pins = "gpio17";
+					function = "blsp_uart_tx_a2";
+				};
+			};
+
+			blsp1_uart3_default: blsp1-uart3-default-state {
+				cts-pins {
+					pins = "gpio84";
+					function = "blsp_uart3";
+				};
+
+				rts-tx-pins {
+					pins = "gpio85", "gpio82";
+					function = "blsp_uart3";
+				};
+
+				rx-pins {
+					pins = "gpio83";
+					function = "blsp_uart3";
+				};
+			};
+
+			blsp2_i2c0_default: blsp2-i2c0-default-state {
+				pins = "gpio28", "gpio29";
+				function = "blsp_i2c5";
+			};
+
+			blsp1_spi0_default: blsp1-spi0-default-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "blsp_spi0";
+			};
+
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				mosi-pins {
+					pins = "gpio22";
+					function = "blsp_spi_mosi_a1";
+				};
+
+				miso-pins {
+					pins = "gpio23";
+					function = "blsp_spi_miso_a1";
+				};
+
+				cs-n-pins {
+					pins = "gpio24";
+					function = "blsp_spi_cs_n_a1";
+				};
+
+				clk-pins {
+					pins = "gpio25";
+					function = "blsp_spi_clk_a1";
+				};
+			};
+
+			blsp1_spi2_default: blsp1-spi2-default-state {
+				pins = "gpio17", "gpio18", "gpio19", "gpio20";
+				function = "blsp_spi2";
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				pins = "gpio82", "gpio83", "gpio84", "gpio85";
+				function = "blsp_spi3";
+			};
+
+			blsp1_spi4_default: blsp1-spi4-default-state {
+				pins = "gpio37", "gpio38", "gpio117", "gpio118";
+				function = "blsp_spi4";
+			};
+
+			blsp2_spi0_default: blsp2-spi0-default-state {
+				pins = "gpio26", "gpio27", "gpio28", "gpio29";
+				function = "blsp_spi5";
+			};
+
+			blsp2_uart0_default: blsp2-uart0-default-state {
+				pins = "gpio26", "gpio27", "gpio28", "gpio29";
+				function = "blsp_uart5";
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-qcs404";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&pcie_phy>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
+			assigned-clock-rates = <19200000>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,qcs404-tcsr", "syscon";
+			reg = <0x01937000 0x25000>;
+		};
+
+		sram@290000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		remoteproc_wcss: remoteproc@7400000 {
+			compatible = "qcom,qcs404-wcss-pas";
+			reg = <0x07400000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&wlan_fw_mem>;
+
+			qcom,smem-states = <&wcss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 16>;
+
+				label = "wcss";
+			};
+		};
+
+		pcie_phy: phy@7786000 {
+			compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
+			reg = <0x07786000 0xb8>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+			resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
+				 <&gcc GCC_PCIE_0_PIPE_ARES>;
+			reset-names = "phy", "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sdcc1: mmc@7804000 {
+			compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x25000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "okay";
+		};
+
+		blsp1_uart0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart0_default>;
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "okay";
+		};
+
+		ethernet: ethernet@7a80000 {
+			compatible = "qcom,qcs404-ethqos";
+			reg = <0x07a80000 0x10000>,
+				<0x07a96000 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+			clocks = <&gcc GCC_ETH_AXI_CLK>,
+				<&gcc GCC_ETH_SLAVE_AHB_CLK>,
+				<&gcc GCC_ETH_PTP_CLK>,
+				<&gcc GCC_ETH_RGMII_CLK>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			snps,tso;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
+		wifi: wifi@a000000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0xa000000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		blsp1_uart3: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b2000 0x200>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart3_default>;
+			status = "disabled";
+		};
+
+		blsp1_i2c0: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x600>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi4: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x600>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x17000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		blsp2_uart0: serial@7aef000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07aef000 0x200>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_uart0_default>;
+			status = "disabled";
+		};
+
+		blsp2_i2c0: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi0: spi@7af5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sram@8600000 {
+			compatible = "qcom,qcs404-imem", "syscon", "simple-mfd";
+			reg = <0x08600000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x08600000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			      <0x0b002000 0x1000>;
+		};
+
+		apcs_glb: mailbox@b011000 {
+			compatible = "qcom,qcs404-apcs-apps-global",
+				     "qcom,msm8916-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+			clock-names = "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		apcs_hfpll: clock-controller@b016000 {
+			compatible = "qcom,hfpll";
+			reg = <0x0b016000 0x30>;
+			#clock-cells = <0>;
+			clock-output-names = "apcs_hfpll";
+			clocks = <&xo_board>;
+			clock-names = "xo";
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		cpr: power-controller@b018000 {
+			compatible = "qcom,qcs404-cpr", "qcom,cpr";
+			reg = <0x0b018000 0x1000>;
+			interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&xo_board>;
+			clock-names = "ref";
+			vdd-apc-supply = <&pms405_s3>;
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&cpr_opp_table>;
+			acc-syscon = <&tcsr>;
+
+			nvmem-cells = <&cpr_efuse_quot_offset1>,
+				<&cpr_efuse_quot_offset2>,
+				<&cpr_efuse_quot_offset3>,
+				<&cpr_efuse_init_voltage1>,
+				<&cpr_efuse_init_voltage2>,
+				<&cpr_efuse_init_voltage3>,
+				<&cpr_efuse_quot1>,
+				<&cpr_efuse_quot2>,
+				<&cpr_efuse_quot3>,
+				<&cpr_efuse_ring1>,
+				<&cpr_efuse_ring2>,
+				<&cpr_efuse_ring3>,
+				<&cpr_efuse_revision>;
+			nvmem-cell-names = "cpr_quotient_offset1",
+				"cpr_quotient_offset2",
+				"cpr_quotient_offset3",
+				"cpr_init_voltage1",
+				"cpr_init_voltage2",
+				"cpr_init_voltage3",
+				"cpr_quotient1",
+				"cpr_quotient2",
+				"cpr_quotient3",
+				"cpr_ring_osc1",
+				"cpr_ring_osc2",
+				"cpr_ring_osc3",
+				"cpr_fuse_revision";
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b121000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		remoteproc_adsp: remoteproc@c700000 {
+			compatible = "qcom,qcs404-adsp-pas";
+			reg = <0x0c700000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_fw_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 8>;
+
+				label = "adsp";
+			};
+		};
+
+		pcie: pci@10000000 {
+			compatible = "qcom,pcie-qcs404";
+			reg = <0x10000000 0xf1d>,
+			      <0x10000f20 0xa8>,
+			      <0x07780000 0x2000>,
+			      <0x10001000 0x2000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */
+				 <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+			clock-names = "iface", "aux", "master_bus", "slave_bus";
+
+			resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE_0_BCR>,
+				 <&gcc GCC_PCIE_0_AHB_ARES>;
+			reset-names = "axi_m",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "pipe_sticky",
+				      "pwr",
+				      "ahb";
+
+			phys = <&pcie_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 0xff08>,
+			     <GIC_PPI 3 0xff08>,
+			     <GIC_PPI 4 0xff08>,
+			     <GIC_PPI 1 0xff08>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 10>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 18>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		wcss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		lpass-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				lpass_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cluster_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cluster_crit: cluster-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cluster_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu0_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu1_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_crit: cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu2_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_crit: cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu3_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_crit: cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
new file mode 100644
index 0000000000..5a25cdec96
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -0,0 +1,502 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qdu1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QDU1000 IDP";
+	compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+&apps_rsc {
+	regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vph_pwr>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+		vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+		vreg_s2a_0p5: smps2 {
+			regulator-name = "vreg_s2a_0p5";
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <570000>;
+		};
+
+		vreg_s3a_1p05: smps3 {
+			regulator-name = "vreg_s3a_1p05";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-name = "vreg_s5a_2p0";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-name = "vreg_s6a_0p9";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s7a_1p2: smps7 {
+			regulator-name = "vreg_s7a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s8a_1p3: smps8 {
+			regulator-name = "vreg_s8a_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_2p3: ldo2 {
+			regulator-name = "vreg_l2a_2p3";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-name = "vreg_l5a_0p8";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p91: ldo6 {
+			regulator-name = "vreg_l6a_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+		};
+
+		vreg_l8a_0p91: ldo8 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <888000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p91: ldo9 {
+			regulator-name = "vreg_l9a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_0p91: ldo11 {
+			regulator-name = "vreg_l11a_0p91";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_1p8: ldo16 {
+			regulator-name = "vreg_l16a_1p8";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p3: ldo17 {
+			regulator-name = "vreg_l17a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&qup_i2c1_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c2_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c3_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c4_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c5_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c6_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c9_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c10_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c11_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c12_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c13_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c14_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c15_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_spi1_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi1_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&reserved_memory {
+	ecc_meta_data_mem: ecc-meta-data@e0000000 {
+		reg = <0x0 0xe0000000 0x0 0x20000000>;
+		no-map;
+	};
+
+	harq_buffer_mem: harq-buffer@800000000 {
+		reg = <0x8 0x0 0x0 0x80000000>;
+		no-map;
+	};
+
+	tenx_sp_buffer_mem: tenx-sp-buffer@880000000 {
+		reg = <0x8 0x80000000 0x0 0x50000000>;
+		no-map;
+	};
+
+	fapi_buffer_mem: fapi-buffer@8d0000000 {
+		reg = <0x8 0xd0000000 0x0 0x20000000>;
+		no-map;
+	};
+};
+
+&sdhc {
+	pinctrl-0 = <&sdc_on_state>;
+	pinctrl-1 = <&sdc_off_state>;
+	pinctrl-names = "default", "sleep";
+
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	supports-cqe;
+
+	vmmc-supply = <&vreg_l10a_2p95>;
+	vqmmc-supply = <&vreg_l7a_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 2>;
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
new file mode 100644
index 0000000000..1c0e5d271e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -0,0 +1,1467 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,qdu1000-gcc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen: chosen { };
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+
+		CPU_OFF: cpu-sleep-0 {
+			compatible = "arm,idle-state";
+			entry-latency-us = <274>;
+			exit-latency-us = <480>;
+			min-residency-us = <3934>;
+			arm,psci-suspend-param = <0x40000004>;
+			local-timer-stop;
+		};
+	};
+
+	domain-idle-states {
+		CLUSTER_SLEEP_0: cluster-sleep-0 {
+			compatible = "domain-idle-state";
+			entry-latency-us = <584>;
+			exit-latency-us = <2332>;
+			min-residency-us = <6118>;
+			arm,psci-suspend-param = <0x41000044>;
+		};
+
+		CLUSTER_SLEEP_1: cluster-sleep-1 {
+			compatible = "domain-idle-state";
+			entry-latency-us = <2893>;
+			exit-latency-us = <4023>;
+			min-residency-us = <9987>;
+			arm,psci-suspend-param = <0x41003344>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-qdu1000", "qcom,scm";
+		};
+	};
+
+	mc_virt: interconnect-0 {
+		compatible = "qcom,qdu1000-mc-virt";
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		#interconnect-cells = <2>;
+	};
+
+	clk_virt: interconnect-1 {
+		compatible = "qcom,qdu1000-clk-virt";
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		#interconnect-cells = <2>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_dt_log_mem: xbl-dt-log@80600000 {
+			reg = <0x0 0x80600000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@80640000 {
+			reg = <0x0 0x80640000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@80880000 {
+			reg = <0x0 0x80880000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@808a0000 {
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@808e0000 {
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@808e4000 {
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+			no-map;
+		};
+
+		smem_mem: smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		cpucp_fw_mem: cpucp-fw@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_sc_mem: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0x40000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@81d00000 {
+			reg = <0x0 0x81d00000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@81e00000 {
+			reg = <0x0 0x81e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@82300000 {
+			reg = <0x0 0x82300000 0x0 0x500000>;
+			no-map;
+		};
+
+		ta_mem: ta@82800000 {
+			reg = <0x0 0x82800000 0x0 0xa00000>;
+			no-map;
+		};
+
+		fs1_mem: fs1@83200000 {
+			reg = <0x0 0x83200000 0x0 0x400000>;
+			no-map;
+		};
+
+		fs2_mem: fs2@83600000 {
+			reg = <0x0 0x83600000 0x0 0x400000>;
+			no-map;
+		};
+
+		fs3_mem: fs3@83a00000 {
+			reg = <0x0 0x83a00000 0x0 0x400000>;
+			no-map;
+		};
+
+		/* Linux kernel image is loaded at 0x83e00000 */
+
+		ipa_fw_mem: ipa-fw@8be00000 {
+			reg = <0x0 0x8be00000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8be10000 {
+			reg = <0x0 0x8be10000 0x0 0x14000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8c000000 {
+			reg = <0x0 0x8c000000 0x0 0x12c00000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 {
+			reg = <0x0 0x9ec00000 0x0 0x80000>;
+			no-map;
+		};
+
+		tenx_mem: tenx@a0000000 {
+			reg = <0x0 0xa0000000 0x0 0x19600000>;
+			no-map;
+		};
+
+		oem_tenx_mem: oem-tenx@b9600000 {
+			reg = <0x0 0xb9600000 0x0 0x6a00000>;
+			no-map;
+		};
+
+		tenx_q6_buffer_mem: tenx-q6-buffer@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x3200000>;
+			no-map;
+		};
+
+		ipa_buffer_mem: ipa-buffer@c3200000 {
+			reg = <0x0 0xc3200000 0x0 0x12c00000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@80000 {
+			compatible = "qcom,qdu1000-gcc";
+			reg = <0x0 0x80000 0x0 0x1f4200>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpi_dma0: dma-controller@900000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x900000 0x0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
+					 &clk_virt SLAVE_QUP_CORE_0 0>;
+			interconnect-names = "qup-core";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x99c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x116 0x0>;
+			#dma-cells = <3>;
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x103 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart8_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart13_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		system_noc: interconnect@1640000 {
+			compatible = "qcom,qdu1000-system-noc";
+			reg = <0x0 0x1640000 0x0 0x45080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x1f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		sdhc: mmc@8804000 {
+			compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x08804000 0x0 0x1000>,
+			      <0x0 0x08805000 0x0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC5_AHB_CLK>,
+				 <&gcc GCC_SDCC5_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC5_BCR>;
+
+			interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			power-domains = <&rpmhpd QDU1000_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			dma-coherent;
+
+			bus-width = <8>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <6528000 1652800>;
+					opp-avg-kBps = <400000 0>;
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+					  <94 609 31>, <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0xc400000 0x0 0x3000>,
+			      <0x0 0xc500000 0x0 0x400000>,
+			      <0x0 0xc440000 0x0 0x80000>,
+			      <0x0 0xc4c0000 0x0 0x10000>,
+			      <0x0 0xc42d000 0x0 0x4000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,qdu1000-tlmm";
+			reg = <0x0 0xf000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart0_default: qup-uart0-default-state {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "qup00";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio10", "gpio11";
+				function = "qup01";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup01";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio13";
+				function = "gpio";
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio12", "gpio13";
+				function = "qup02";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio12", "gpio13", "gpio10";
+				function = "qup02";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "gpio";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio14", "gpio15";
+				function = "qup03";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio14", "gpio15", "gpio16";
+				function = "qup03";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio17";
+				function = "gpio";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio16", "gpio17", "gpio14";
+				function = "qup04";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio15";
+				function = "gpio";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio130", "gpio131";
+				function = "qup05";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio130", "gpio131", "gpio132";
+				function = "qup05";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio133";
+				function = "gpio";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio132", "gpio133";
+				function = "qup06";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio132", "gpio133", "gpio130";
+				function = "qup06";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio131";
+				function = "gpio";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio135";
+				function = "qup07";
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state  {
+				pins = "gpio134";
+				function = "qup07";
+			};
+
+			qup_uart8_default: qup-uart8-default-state {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "qup10";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				pins = "gpio22", "gpio23";
+				function = "qup11";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio22", "gpio23", "gpio24";
+				function = "qup11";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio25";
+				function = "gpio";
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				pins = "gpio24", "gpio25";
+				function = "qup12";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio24", "gpio25", "gpio22";
+				function = "qup12";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio23";
+				function = "gpio";
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				pins = "gpio26", "gpio27";
+				function = "qup13";
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				pins = "gpio26", "gpio27", "gpio28";
+				function = "qup13";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio29";
+				function = "gpio";
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				pins = "gpio28", "gpio29";
+				function = "qup14";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio28", "gpio29", "gpio26";
+				function = "qup14";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio27";
+				function = "gpio";
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				pins = "gpio30", "gpio31";
+				function = "qup15";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio30", "gpio31", "gpio32";
+				function = "qup15";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio33";
+				function = "gpio";
+			};
+
+			qup_uart13_default: qup-uart13-default-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "qup15";
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				pins = "gpio34", "gpio35";
+				function = "qup16";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio34", "gpio35", "gpio36";
+				function = "qup16";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio37", "gpio38";
+				function = "gpio";
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				pins = "gpio40", "gpio41";
+				function = "qup17";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio40", "gpio41", "gpio30";
+				function = "qup17";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio31";
+				function = "gpio";
+			};
+
+			sdc_on_state: sdc-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc_off_state: sdc-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+		};
+
+		sram@14680000 {
+			compatible = "qcom,qdu1000-imem", "syscon", "simple-mfd";
+			reg = <0 0x14680000 0 0x1000>;
+			ranges = <0 0 0x14680000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,qdu1000-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>,
+				      <0x17426000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+			label = "apps_rsc";
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,qdu1000-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qdu1000-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d90000 {
+			compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,qdu1000-gem-noc";
+			reg = <0x0 0x19100000 0x0 0xB8080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@19200000 {
+			compatible = "qcom,qdu1000-llcc";
+			reg = <0 0x19200000 0 0xd80000>,
+			      <0 0x1a200000 0 0x80000>,
+			      <0 0x221c8128 0 0x4>;
+			reg-names = "llcc_base",
+				    "llcc_broadcast_base",
+				    "multi_channel_register";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			multi-ch-bit-off = <24 2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
new file mode 100644
index 0000000000..37abb83ea4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ */
+
+/dts-v1/;
+
+#include "qcm2290.dtsi"
+#include "pm2250.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB1";
+	compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290";
+
+	aliases {
+		serial0 = &uart4;
+		sdhc1 = &sdhc_1;
+		sdhc2 = &sdhc_2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&key_volp_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_HDMI_OUT_1P2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdc_1v2>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lt9611_3v3: regulator-lt9611-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdc_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Main barrel jack input */
+	vdc_12v: regulator-vdc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 1.2V supply stepped down from the barrel jack input */
+	vdc_1v2: regulator-vdc-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 3.3V supply stepped down from the barrel jack input */
+	vdc_3v3: regulator-vdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 5V supply stepped down from the barrel jack input */
+	vdc_5v: regulator-vdc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* "Battery" voltage for the SoM, stepped down from the barrel jack input */
+	vdc_vbat_som: regulator-vdc-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* PM2250 charger out, supplied by VBAT */
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		vin-supply = <&vdc_vbat_som>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&pm2250_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm2250-regulators";
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm2250_s3>;
+		vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>;
+		vdd_l13_l14_l15_l16-supply = <&pm2250_s4>;
+
+		/*
+		 * S1 - VDD_APC
+		 * S2 - VDD_CX
+		 */
+
+		pm2250_s3: s3 {
+			/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-boot-on;
+		};
+
+		pm2250_s4: s4 {
+			/* 1.2V-2.35V -> 2.05V (Power tree requirements) */
+			regulator-min-microvolt = <2072000>;
+			regulator-max-microvolt = <2072000>;
+			regulator-boot-on;
+		};
+
+		/* L1 - VDD_MX */
+
+		pm2250_l2: l2 {
+			/* LPDDR4X VDD2 */
+			regulator-min-microvolt = <1136000>;
+			regulator-max-microvolt = <1136000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm2250_l3: l3 {
+			/* LPDDR4X VDDQ */
+			regulator-min-microvolt = <616000>;
+			regulator-max-microvolt = <616000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm2250_l4: l4 {
+			/* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-allow-set-load;
+		};
+
+		pm2250_l5: l5 {
+			/* CSI/DSI */
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1232000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm2250_l6: l6 {
+			/* DRAM PLL */
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <928000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm2250_l7: l7 {
+			/* Wi-Fi CX/MX */
+			regulator-min-microvolt = <664000>;
+			regulator-max-microvolt = <664000>;
+		};
+
+		/*
+		 * L8 - VDD_LPI_CX
+		 * L9 - VDD_LPI_MX
+		 */
+
+		pm2250_l10: l10 {
+			/* Wi-Fi RFA */
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm2250_l11: l11 {
+			/* GPS RF1 */
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+		};
+
+		pm2250_l12: l12 {
+			/* USB PHYs */
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <928000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm2250_l13: l13 {
+			/* USB/QFPROM/PLLs */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm2250_l14: l14 {
+			/* SDHCI1 VQMMC */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			/* Broken hardware, never turn it off! */
+			regulator-always-on;
+		};
+
+		pm2250_l15: l15 {
+			/* WCD/DSI/BT VDDIO */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm2250_l16: l16 {
+			/* GPS RF2 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm2250_l17: l17 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm2250_l18: l18 {
+			/* VDD_PXn */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm2250_l19: l19 {
+			/* VDD_PXn */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm2250_l20: l20 {
+			/* SDHCI1 VMMC */
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-allow-set-load;
+		};
+
+		pm2250_l21: l21 {
+			/* SDHCI2 VMMC */
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm2250_l22: l22 {
+			/* Wi-Fi */
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm2250_l20>;
+	vqmmc-supply = <&pm2250_l14>;
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+	non-removable;
+	supports-cqe;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm2250_l21>;
+	vqmmc-supply = <&pm2250_l4>;
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_state_on &sd_det_in_on>;
+	pinctrl-1 = <&sdc2_state_off &sd_det_in_off>;
+	pinctrl-names = "default", "sleep";
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	sd_det_in_on: sd-det-in-on-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sd_det_in_off: sd-det-in-off-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	key_volp_n: key-volp-n-state {
+		pins = "gpio96";
+		function = "gpio";
+		bias-pull-up;
+		output-disable;
+	};
+};
+
+/* UART connected to the Micro-USB port via a FTDI chip */
+&uart4 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&pm2250_l12>;
+	vdda-pll-supply = <&pm2250_l13>;
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_hsphy {
+	vdd-supply = <&pm2250_l12>;
+	vdda-pll-supply = <&pm2250_l13>;
+	vdda-phy-dpdm-supply = <&pm2250_l21>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
new file mode 100644
index 0000000000..9738c0dacd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "sm4250.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QRB4210 RB2";
+	compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		clk40M: can-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&kypd_vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bt {
+			label = "blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+		led-user0 {
+			label = "green:user0";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_HDMI_OUT_1P2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdc_1v2>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lt9611_3v3: regulator-lt9611-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdc_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Main barrel jack input */
+	vdc_12v: regulator-vdc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 1.2V supply stepped down from the barrel jack input */
+	vdc_1v2: regulator-vdc-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 3.3V supply stepped down from the barrel jack input */
+	vdc_3v3: regulator-vdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 5V supply stepped down from the barrel jack input */
+	vdc_5v: regulator-vdc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* "Battery" voltage for the SoM, stepped down from the barrel jack input */
+	vdc_vbat_som: regulator-vdc-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* PMI632 charger out, supplied by VBAT */
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		vin-supply = <&vdc_vbat_som>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/qrb4210/a610_zap.mbn";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_hdmi_out_1p2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l18a_1p232>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pm6125_gpios {
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qrb4210/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qrb4210/cdsp.mbn";
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>;
+		vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>;
+		vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>;
+		vdd-l6-l8-supply = <&vreg_s5a_0p848>;
+		vdd-l9-l11-supply = <&vreg_s7a_2p04>;
+		vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>;
+		vdd-l12-l16-supply = <&vreg_s7a_2p04>;
+		vdd-l23-l24-supply = <&vph_pwr>;
+
+		vreg_s5a_0p848: s5 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s6a_1p352: s6 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a_2p04: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2080000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a_0p9: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_2p96: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a_0p6: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a_1p256: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a_0p664: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a_1p8: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a_1p8: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a_3p128: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a_1p3: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1384000>;
+		};
+
+		vreg_l18a_1p232: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1312000>;
+		};
+
+		vreg_l19a_1p8: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a_1p8: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a_2p704: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		vreg_l22a_2p96: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		vreg_l24a_2p96: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l24a_2p96>;
+	vqmmc-supply = <&vreg_l11a_1p8>;
+	no-sdio;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */
+
+	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l22a_2p96>;
+	vqmmc-supply = <&vreg_l5a_2p96>;
+	no-sdio;
+
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&clk40M>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <43 2>, <49 1>, <54 1>,
+			       <56 3>, <61 2>, <64 1>,
+			       <68 1>, <72 8>, <96 1>;
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio41";
+		function = "gpio";
+		input-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio46";
+		function = "gpio";
+		bias-disable;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "super-speed";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
new file mode 100644
index 0000000000..bb149e5779
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "qrb5165-rb5.dts"
+
+&camcc {
+	status = "okay";
+};
+
+&camss {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+
+	ports {
+		/* The port index denotes CSIPHY id i.e. csiphy2 */
+		port@2 {
+			csiphy2_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply  = <&vreg_l7f_1p8>;
+		avdd-supply = <&vdc_5v>;
+		dvdd-supply = <&vdc_5v>;
+
+		port {
+			imx577_ep: endpoint {
+				clock-lanes = <1>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy2_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
new file mode 100644
index 0000000000..e95a004c33
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -0,0 +1,1341 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB5";
+	compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
+	qcom,msm-id = <455 0x20001>;
+	qcom,board-id = <11 3>;
+
+	aliases {
+		serial0 = &uart12;
+		sdhc2 = &sdhc_2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Fixed crystal oscillator dedicated to MCP2518FD */
+	clk40M: can-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	dc12v: dc12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user4 {
+			label = "green:user4";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-bt {
+			label = "blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+
+	lt9611_1v2: lt9611-vdd12-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V2";
+
+		vin-supply = <&vdc_3v3>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	lt9611_3v3: lt9611-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+
+		vin-supply = <&vdc_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	thermal-zones {
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		pm8150l-pcb-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-msm-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wifi-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <52000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		vin-supply = <&vreg_l11c_3p3>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vbat_som: vbat-som-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vdc_3v3: vdc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		vin-supply = <&vreg_l11c_3p3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdc_5v: vdc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vreg_l11c_3p3>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8009-1-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2f_0p95: smps2 {
+			regulator-name = "vreg_s2f_0p95";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1f_1p1: ldo1 {
+			regulator-name = "vreg_l1f_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-name = "vreg_l2f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p7: ldo7 {
+			regulator-name = "vreg_l7a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_ts_3p0: ldo13 {
+			regulator-name = "vreg_l13a_ts_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p92: ldo18 {
+			regulator-name = "vreg_l18a_0p92";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p2: ldo2 {
+			regulator-name = "vreg_l2c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p7: ldo4 {
+			regulator-name = "vreg_l4c_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_cam_vcm0_2p85: ldo7 {
+			regulator-name = "vreg_l7c_cam_vcm0_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p0: ldo10 {
+			regulator-name = "vreg_l10c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-name = "vreg_l11c_3p3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3296000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-name = "vreg_s8c_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/a650_zap.mbn";
+	};
+};
+
+/* LS-I2C0 */
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+#if 0
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+#endif
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+
+		};
+	};
+};
+
+/* LS-I2C1 */
+&i2c15 {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l9a_1p2>;
+
+#if 0
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+#endif
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l5a_0p88>;
+};
+
+&pm8150_adc {
+	channel@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "xo_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "wifi_therm";
+	};
+};
+
+&pm8150_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wifi-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&pcie2_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pm8150_gpios {
+	gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
+	gpio-line-names =
+		"NC",
+		"OPTION2",
+		"PM_GPIO-F",
+		"PM_SLP_CLK_IN",
+		"OPTION1",
+		"VOL_UP_N",
+		"PM8250_GPIO7", /* Blue LED */
+		"SP_ARI_PWR_ALARM",
+		"GPIO_9_P", /* Yellow LED */
+		"GPIO_10_P"; /* Green LED */
+};
+
+&pm8150b_adc {
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "conn_therm";
+	};
+};
+
+&pm8150b_adc_tm {
+	status = "okay";
+
+	conn-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150b_gpios {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"HAP_BOOST_EN", /* SOM */
+		"SMB_STAT", /* SOM */
+		"NC",
+		"NC",
+		"SDM_FORCE_USB_BOOT",
+		"NC",
+		"NC",
+		"NC";
+};
+
+&pm8150l_adc {
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_msm_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "pm8150l_therm";
+	};
+};
+
+&pm8150l_adc_tm {
+	status = "okay";
+
+	skin-msm-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pm8150l-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150l_gpios {
+	gpio-line-names =
+		"NC",
+		"PM3003A_EN",
+		"NC",
+		"NC",
+		"PM_GPIO5", /* HDMI RST_N */
+		"PM_GPIO-A", /* PWM */
+		"PM_GPIO7",
+		"NC",
+		"NC",
+		"PM_GPIO-B",
+		"NC",
+		"PM3003A_MODE";
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio5";
+		function = "normal";
+
+		output-high;
+		input-disable;
+		power-source = <0>;
+	};
+};
+
+&pm8150l_lpg {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	led@1 {
+		reg = <1>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <3>;
+
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+
+	led@2 {
+		reg = <2>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <2>;
+		default-state = "on";
+	};
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <1>;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <0 1 2 3>;
+	};
+};
+
+/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+	dai@20 {
+		reg = <TERTIARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+	cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+};
+
+&sound {
+	compatible = "qcom,qrb5165-rb5-sndcard";
+	pinctrl-0 = <&tert_mi2s_active>;
+	pinctrl-names = "default";
+	model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"VA DMIC0", "vdd-micb",
+		"VA DMIC1", "vdd-micb",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&lt9611_codec 0>;
+		};
+	};
+
+	dma-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+/* CAN */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
+	cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		clocks = <&clk40M>;
+		interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: speaker@0,3 {
+		compatible = "sdw10217211000";
+		reg = <0 3>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+	};
+
+	right_spkr: speaker@0,4 {
+		compatible = "sdw10217211000";
+		reg = <0 4>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>;
+	gpio-line-names =
+		"GPIO-MM",
+		"GPIO-NN",
+		"GPIO-OO",
+		"GPIO-PP",
+		"GPIO-A",
+		"GPIO-C",
+		"GPIO-E",
+		"GPIO-D",
+		"I2C0-SDA",
+		"I2C0-SCL",
+		"GPIO-TT", /* GPIO_10 */
+		"NC",
+		"GPIO_12_I2C_SDA",
+		"GPIO_13_I2C_SCL",
+		"GPIO-X",
+		"GPIO_15_RGMII_INT",
+		"HST_BT_UART_CTS",
+		"HST_BT_UART_RFR",
+		"HST_BT_UART_TX",
+		"HST_BT_UART_RX",
+		"HST_WLAN_EN", /* GPIO_20 */
+		"HST_BT_EN",
+		"GPIO-AAA",
+		"GPIO-BBB",
+		"GPIO-CCC",
+		"GPIO-Z",
+		"GPIO-DDD",
+		"GPIO-BB",
+		"GPIO_28_CAN_SPI_MISO",
+		"GPIO_29_CAN_SPI_MOSI",
+		"GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
+		"GPIO_31_CAN_SPI_CS",
+		"GPIO-UU",
+		"NC",
+		"UART1_TXD_SOM",
+		"UART1_RXD_SOM",
+		"UART0_CTS",
+		"UART0_RTS",
+		"UART0_TXD",
+		"UART0_RXD",
+		"SPI1_MISO", /* GPIO_40 */
+		"SPI1_MOSI",
+		"SPI1_CLK",
+		"SPI1_CS",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"GPIO-F",
+		"GPIO-JJ",
+		"Board_ID1",
+		"Board_ID2",
+		"NC", /* GPIO_50 */
+		"NC",
+		"SPI0_MISO",
+		"SPI0_MOSI",
+		"SPI0_SCLK",
+		"SPI0_CS",
+		"GPIO-QQ",
+		"GPIO-RR",
+		"USB2LAN_RESET",
+		"USB2LAN_EXTWAKE",
+		"NC", /* GPIO_60 */
+		"NC",
+		"NC",
+		"LT9611_INT",
+		"GPIO-AA",
+		"USB_CC_DIR",
+		"GPIO-G",
+		"GPIO-LL",
+		"USB_DP_HPD_1P8",
+		"NC",
+		"NC", /* GPIO_70 */
+		"SD_CMD",
+		"SD_DAT3",
+		"SD_SCLK",
+		"SD_DAT2",
+		"SD_DAT1",
+		"SD_DAT0", /* BOOT_CFG3 */
+		"SD_UFS_CARD_DET_N",
+		"GPIO-II",
+		"PCIE0_RST_N",
+		"PCIE0_CLK_REQ_N", /* GPIO_80 */
+		"PCIE0_WAKE_N",
+		"GPIO-CC",
+		"GPIO-DD",
+		"GPIO-EE",
+		"GPIO-FF",
+		"GPIO-GG",
+		"GPIO-HH",
+		"GPIO-VV",
+		"GPIO-WW",
+		"NC", /* GPIO_90 */
+		"NC",
+		"GPIO-K",
+		"GPIO-I",
+		"CSI0_MCLK",
+		"CSI1_MCLK",
+		"CSI2_MCLK",
+		"CSI3_MCLK",
+		"GPIO-AA", /* CSI4_MCLK */
+		"GPIO-BB", /* CSI5_MCLK */
+		"GPIO-KK", /* GPIO_100 */
+		"CCI_I2C_SDA0",
+		"CCI_I2C_SCL0",
+		"CCI_I2C_SDA1",
+		"CCI_I2C_SCL1",
+		"CCI_I2C_SDA2",
+		"CCI_I2C_SCL2",
+		"CCI_I2C_SDA3",
+		"CCI_I2C_SCL3",
+		"GPIO-L",
+		"NC", /* GPIO_110 */
+		"NC",
+		"ACCEL_INT",
+		"GYRO_INT",
+		"GPIO-J",
+		"GPIO-YY",
+		"GPIO-H",
+		"GPIO-ZZ",
+		"NC",
+		"NC",
+		"NC", /* GPIO_120 */
+		"NC",
+		"MAG_INT",
+		"MAG_DRDY_INT",
+		"HST_SW_CTRL",
+		"GPIO-M",
+		"GPIO-N",
+		"GPIO-O",
+		"GPIO-P",
+		"PS_INT",
+		"WSA1_EN", /* GPIO_130 */
+		"USB_HUB_RESET",
+		"SDM_FORCE_USB_BOOT",
+		"I2S1_CLK_HDMI",
+		"I2S1_DATA0_HDMI",
+		"I2S1_WS_HDMI",
+		"GPIO-B",
+		"GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
+		"PCM_CLK",
+		"PCM_DI",
+		"PCM_DO", /* GPIO_140 */
+		"PCM_FS",
+		"HST_SLIM_CLK",
+		"HST_SLIM_DATA",
+		"GPIO-U",
+		"GPIO-Y",
+		"GPIO-R",
+		"GPIO-Q",
+		"GPIO-S",
+		"GPIO-T",
+		"GPIO-V", /* GPIO_150 */
+		"GPIO-W",
+		"DMIC_CLK1",
+		"DMIC_DATA1",
+		"DMIC_CLK2",
+		"DMIC_DATA2",
+		"WSA_SWR_CLK",
+		"WSA_SWR_DATA",
+		"DMIC_CLK3",
+		"DMIC_DATA3",
+		"I2C4_SDA", /* GPIO_160 */
+		"I2C4_SCL",
+		"SPI3_CS1",
+		"SPI3_CS2",
+		"SPI2_MISO_LS3",
+		"SPI2_MOSI_LS3",
+		"SPI2_CLK_LS3",
+		"SPI2_ACCEL_CS_LS3",
+		"SPI2_CS1",
+		"NC",
+		"GPIO-SS", /* GPIO_170 */
+		"GPIO-XX",
+		"SPI3_MISO",
+		"SPI3_MOSI",
+		"SPI3_CLK",
+		"SPI3_CS",
+		"HST_BLE_SNS_UART_TX",
+		"HST_BLE_SNS_UART_RX",
+		"HST_WLAN_UART_TX",
+		"HST_WLAN_UART_RX";
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio63";
+		function = "gpio";
+		bias-disable;
+	};
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio77";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p92>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p92>;
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_active>;
+	pinctrl-names = "default";
+	vdd-micb-supply = <&vreg_s4a_1p8>;
+	qcom,dmic-sample-rate = <600000>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sm8250.dtsi */
+&qup_spi0_cs_gpio {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi0_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
new file mode 100644
index 0000000000..2a862c8330
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qru1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QRU1000 IDP";
+	compatible = "qcom,qru1000-idp", "qcom,qru1000";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+&apps_rsc {
+	regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vph_pwr>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+		vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+		vreg_s2a_0p5: smps2 {
+			regulator-name = "vreg_s2a_0p5";
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <570000>;
+		};
+
+		vreg_s3a_1p05: smps3 {
+			regulator-name = "vreg_s3a_1p05";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-name = "vreg_s5a_2p0";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-name = "vreg_s6a_0p9";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s7a_1p2: smps7 {
+			regulator-name = "vreg_s7a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s8a_1p3: smps8 {
+			regulator-name = "vreg_s8a_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_2p3: ldo2 {
+			regulator-name = "vreg_l2a_2p3";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-name = "vreg_l5a_0p8";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p91: ldo6 {
+			regulator-name = "vreg_l6a_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+		};
+
+		vreg_l8a_0p91: ldo8 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <888000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p91: ldo9 {
+			regulator-name = "vreg_l9a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_0p91: ldo11 {
+			regulator-name = "vreg_l11a_0p91";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_1p8: ldo16 {
+			regulator-name = "vreg_l16a_1p8";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p3: ldo17 {
+			regulator-name = "vreg_l17a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&qup_i2c1_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c2_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c3_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c4_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c5_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c6_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c9_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c10_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c11_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c12_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c13_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c14_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c15_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_spi1_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi1_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&reserved_memory {
+	ecc_meta_data_mem: ecc-meta-data@f0000000 {
+		reg = <0x0 0xf0000000 0x0 0x10000000>;
+		no-map;
+	};
+
+	tenx_sp_mem: tenx-sp-buffer@800000000 {
+		reg = <0x8 0x0 0x0 0x80000000>;
+		no-map;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 2>;
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
new file mode 100644
index 0000000000..eac5dc54a8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "qdu1000.dtsi"
+/delete-node/ &tenx_mem;
+/delete-node/ &oem_tenx_mem;
+/delete-node/ &tenx_q6_buffer_mem;
+
+&reserved_memory {
+	oem_tenx_mem: oem-tenx@a0000000 {
+		reg = <0x0 0xa0000000 0x0 0x6400000>;
+		no-map;
+	};
+
+	mpss_diag_buffer_mem: mpss-diag-buffer@aea00000 {
+		reg = <0x0 0xaea00000 0x0 0x6400000>;
+		no-map;
+	};
+
+	tenx_q6_buffer_mem: tenx-q6-buffer@b4e00000 {
+		reg = <0x0 0xb4e00000 0x0 0x3200000>;
+		no-map;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
new file mode 100644
index 0000000000..5e4287f8c8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sa8155p.dtsi"
+#include "pmm8155au_1.dtsi"
+#include "pmm8155au_2.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SA8155P ADP";
+	compatible = "qcom,sa8155p-adp", "qcom,sa8155p";
+
+	aliases {
+		serial0 = &uart2;
+		serial1 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vreg_3p3: vreg-3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/*
+	 * S4A is always on and not controllable through RPMh.
+	 * So model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vreg_3p3>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8155au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vreg_3p3>;
+		vdd-s2-supply = <&vreg_3p3>;
+		vdd-s3-supply = <&vreg_3p3>;
+		vdd-s4-supply = <&vreg_3p3>;
+		vdd-s5-supply = <&vreg_3p3>;
+		vdd-s6-supply = <&vreg_3p3>;
+		vdd-s7-supply = <&vreg_3p3>;
+		vdd-s8-supply = <&vreg_3p3>;
+		vdd-s9-supply = <&vreg_3p3>;
+		vdd-s10-supply = <&vreg_3p3>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
+		vdd-l2-l10-supply = <&vreg_3p3>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p92>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+		vreg_s5a_2p04: smps5 {
+			regulator-name = "vreg_s5a_2p04";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p92: smps6 {
+			regulator-name = "vreg_s6a_0p92";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_l1a_0p752: ldo1 {
+			regulator-name = "vreg_l1a_0p752";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_usb_hs_3p1:
+		vreg_l2a_3p072: ldo2 {
+			regulator-name = "vreg_l2a_3p072";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-name = "vreg_l3a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_usb_hs_core:
+		vdda_usb_ss_dp_core_1:
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p96: ldo10 {
+			regulator-name = "vreg_l10a_2p96";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-name = "vreg_l11a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_usb_hs_1p8:
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p7: ldo13 {
+			regulator-name = "vreg_l13a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-name = "vreg_l15a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_2p96: ldo17 {
+			regulator-name = "vreg_l17a_2p96";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8155au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vreg_3p3>;
+		vdd-s2-supply = <&vreg_3p3>;
+		vdd-s3-supply = <&vreg_3p3>;
+		vdd-s4-supply = <&vreg_3p3>;
+		vdd-s5-supply = <&vreg_3p3>;
+		vdd-s6-supply = <&vreg_3p3>;
+		vdd-s7-supply = <&vreg_3p3>;
+		vdd-s8-supply = <&vreg_3p3>;
+		vdd-s9-supply = <&vreg_3p3>;
+		vdd-s10-supply = <&vreg_3p3>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>;
+		vdd-l2-l10-supply = <&vreg_3p3>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>;
+		vdd-l6-l9-supply = <&vreg_s6c_1p128>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>;
+		vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+		vreg_s4c_1p352: smps4 {
+			regulator-name = "vreg_s4c_1p352";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5c_2p04: smps5 {
+			regulator-name = "vreg_s5c_2p04";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6c_1p128: smps6 {
+			regulator-name = "vreg_s6c_1p128";
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_l1c_1p304: ldo1 {
+			regulator-name = "vreg_l1c_1p304";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p808: ldo2 {
+			regulator-name = "vreg_l2c_1p808";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p2: ldo5 {
+			regulator-name = "vreg_l5c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_1p8: ldo7 {
+			regulator-name = "vreg_l7c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p2: ldo8 {
+			regulator-name = "vreg_l8c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_0p8: ldo11 {
+			regulator-name = "vreg_l11c_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p808: ldo12 {
+			regulator-name = "vreg_l12c_1p808";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p96: ldo13 {
+			regulator-name = "vreg_l13c_2p96";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15c_1p9: ldo15 {
+			regulator-name = "vreg_l15c_1p9";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16c_3p008: ldo16 {
+			regulator-name = "vreg_l16c_3p008";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18c_0p88: ldo18 {
+			regulator-name = "vreg_l18c_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+
+	snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 11000 70000>;
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_defaults>;
+
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Micrel KSZ9031RNZ PHY */
+		rgmii_phy: phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x7>;
+
+			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <1>;
+		snps,tx-sched-wrr;
+
+		queue0 {
+			snps,weight = <0x10>;
+			snps,dcb-algorithm;
+			snps,priority = <0x0>;
+		};
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sa8155p/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sa8155p/cdsp.mdt";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
+	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p96>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l5c_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l8c_1p2>;
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2phy_ac_en1_default>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "disabled";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2phy_ac_en2_default>;
+};
+
+&usb_2_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l8c_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l18c_0p88>;
+	vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l18c_0p88>;
+	vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;		/* No pull */
+			drive-strength = <16>;	/* 16 MA */
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
+		};
+
+		sd-cd-pins {
+			pins = "gpio96";
+			function = "gpio";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;		/* No pull */
+			drive-strength = <2>;	/* 2 MA */
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+
+		sd-cd-pins {
+			pins = "gpio96";
+			function = "gpio";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+
+	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
+		pins = "gpio113";
+		function = "usb2phy_ac";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	usb2phy_ac_en2_default: usb2phy-ac-en2-default-state {
+		pins = "gpio123";
+		function = "usb2phy_ac";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ethernet_defaults: ethernet-defaults-state {
+		mdc-pins {
+			pins = "gpio7";
+			function = "rgmii";
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio59";
+			function = "rgmii";
+			bias-pull-up;
+		};
+
+		rgmii-rx-pins {
+			pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116";
+			function = "rgmii";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		rgmii-tx-pins {
+			pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121";
+			function = "rgmii";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+
+		phy-intr-pins {
+			pins = "gpio124";
+			function = "emac_phy";
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pps-pins {
+			pins = "gpio81";
+			function = "emac_pps";
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		phy-reset-pins {
+			pins = "gpio79";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
new file mode 100644
index 0000000000..ffb7ab6952
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ *
+ * SA8155P is an automotive variant of SM8150, with some minor changes.
+ * Most notably, the RPMhPD setup differs: MMCX and LCX/LMX rails are gone,
+ * though the cmd-db doesn't reflect that and access attemps result in a bite.
+ */
+
+#include "sm8150.dtsi"
+
+&dispcc {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&mdss_dsi0 {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&mdss_dsi1 {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&mdss_mdp {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&remoteproc_slpi {
+	power-domains = <&rpmhpd SA8155P_CX>,
+			<&rpmhpd SA8155P_MX>;
+};
+
+&rpmhpd {
+	/*
+	 * The bindings were crafted such that SA8155P PDs match their
+	 * SM8150 counterparts to make it more maintainable and only
+	 * necessitate adjusting entries that actually differ
+	 */
+	compatible = "qcom,sa8155p-rpmhpd";
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
new file mode 100644
index 0000000000..fd253942e5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -0,0 +1,731 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "sa8540p.dtsi"
+#include "sa8540p-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SA8295P ADP";
+	compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
+
+	aliases {
+		serial0 = &uart17;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dp2-connector {
+		compatible = "dp-connector";
+		label = "DP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp0_phy_out>;
+			};
+		};
+	};
+
+	dp3-connector {
+		compatible = "dp-connector";
+		label = "DP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp1_phy_out>;
+			};
+		};
+	};
+
+	edp0-connector {
+		compatible = "dp-connector";
+		label = "EDP0";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp1-connector {
+		compatible = "dp-connector";
+		label = "EDP1";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp3_phy_out>;
+			};
+		};
+	};
+
+	edp2-connector {
+		compatible = "dp-connector";
+		label = "EDP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp3-connector {
+		compatible = "dp-connector";
+		label = "EDP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp3_phy_out>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c: ldo10 {
+			regulator-name = "vreg_l10c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17c: ldo17 {
+			regulator-name = "vreg_l17c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vreg_l3g: ldo3 {
+			regulator-name = "vreg_l3g";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7g: ldo7 {
+			regulator-name = "vreg_l7g";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8g: ldo8 {
+			regulator-name = "vreg_l8g";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11g: ldo11 {
+			regulator-name = "vreg_l11g";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&dispcc1 {
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp2 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp0_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp2_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss0_dp3 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp1_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1 {
+	status = "okay";
+};
+
+&mdss1_dp0 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp0_phy_out: endpoint {
+				remote-endpoint = <&dp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp0_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp1 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp1_phy_out: endpoint {
+				remote-endpoint = <&dp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp1_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp2 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp2_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp3 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp3_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	num-lanes = <2>;
+
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3b {
+	perst-gpios = <&tlmm 153 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3b_default>;
+
+	status = "okay";
+};
+
+&pcie3b_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8540p/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sa8540p/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp1 {
+	firmware-name = "qcom/sa8540p/cdsp1.mbn";
+	status = "okay";
+};
+
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17c>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6c>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&ufs_card_hc {
+	reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10c>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l3c>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_card_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	/* TODO: Define USB-C connector properly */
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7a>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* TODO: Define USB-C connector properly */
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l1c>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l2c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4c>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy1 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy2 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy3 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3b_default: pcie3b-default-state {
+		clkreq-n-pins {
+			pins = "gpio152";
+			function = "pcie3b_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio153";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio130";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
new file mode 100644
index 0000000000..a1fbb477fa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmm8540a: pmic@0 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8540a_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			wakeup-source;
+		};
+
+		pmm8540a_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmm8540a_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8540c: pmic@4 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8540c_sdam_2: nvram@b110 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0xb110>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xb110 0xb0>;
+			status = "disabled";
+		};
+
+		pmm8540c_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmm8540c_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8540e: pmic@8 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8540e_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmm8540e_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8540g: pmic@c {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8540g_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmm8540g_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
new file mode 100644
index 0000000000..b04f72ec09
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8540p.dtsi"
+#include "sa8540p-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SA8540P Ride";
+	compatible = "qcom,sa8540p-ride", "qcom,sa8540p";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c12 = &i2c12;
+		i2c15 = &i2c15;
+		i2c18 = &i2c18;
+		serial0 = &uart17;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17c: ldo17 {
+			regulator-name = "vreg_l17c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vreg_l3g: ldo3 {
+			regulator-name = "vreg_l3g";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7g: ldo7 {
+			regulator-name = "vreg_l7g";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8g: ldo8 {
+			regulator-name = "vreg_l8g";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	snps,mtl-rx-config = <&ethernet0_mtl_rx_setup>;
+	snps,mtl-tx-config = <&ethernet0_mtl_tx_setup>;
+
+	max-speed = <1000>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-txid";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_default>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Marvell 88EA1512 */
+		rgmii_phy: phy@8 {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0x8>;
+
+			interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>;
+
+			reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+
+			device_type = "ethernet-phy";
+
+			/* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation
+			 * from userspace to talk to the switch on the SGMII side of things
+			 */
+			marvell,reg-init =
+				/* Set MODE[2:0] to RGMII_SGMII */
+				<0x12 0x14 0xfff8 0x4>,
+				/* Soft reset required after changing MODE[2:0] */
+				<0x12 0x14 0x7fff 0x8000>;
+		};
+	};
+
+	ethernet0_mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	ethernet0_mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <1>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	snps,mtl-rx-config = <&ethernet1_mtl_rx_setup>;
+	snps,mtl-tx-config = <&ethernet1_mtl_tx_setup>;
+
+	max-speed = <1000>;
+	phy-mode = "rgmii-txid";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet1_default>;
+
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	ethernet1_mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	ethernet1_mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <1>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+
+	status = "okay";
+};
+
+&i2c12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c12_default>;
+
+	status = "okay";
+};
+
+&i2c15 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c15_default>;
+
+	status = "okay";
+};
+
+&i2c18 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c18_default>;
+
+	status = "okay";
+};
+
+&pcie2a {
+	ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>,
+		 <0x03000000 0x5 0x00000000 0x5 0x00000000 0x1 0x00000000>;
+
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>,
+		 <0x03000000 0x6 0x00000000 0x6 0x00000000 0x2 0x00000000>;
+
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pmm8540a_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmm8540c_sdam_2 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@a0 {
+		reg = <0xa0 0x4>;
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sa8540p/cdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp1 {
+	firmware-name = "qcom/sa8540p/cdsp1.mbn";
+	status = "okay";
+};
+
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17c>;
+	vccq-supply = <&vreg_l6c>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7a>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		mdc-pins {
+			pins = "gpio175";
+			function = "rgmii_0";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio176";
+			function = "rgmii_0";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rgmii-tx-pins {
+			pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188";
+			function = "rgmii_0";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rgmii-rx-pins {
+			pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182";
+			function = "rgmii_0";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	ethernet1_default: ethernet1-default-state {
+		mdc-pins {
+			pins = "gpio97";
+			function = "rgmii_1";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio98";
+			function = "rgmii_1";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rgmii-tx-pins {
+			pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110";
+			function = "rgmii_1";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rgmii-rx-pins {
+			pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104";
+			function = "rgmii_1";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c0_default: i2c0-default-state {
+		/* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */
+		pins = "gpio135", "gpio136";
+		function = "qup0";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	i2c1_default: i2c1-default-state {
+		/* To PM40028B-F3EI PCIe switch */
+		pins = "gpio158", "gpio159";
+		function = "qup1";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	i2c12_default: i2c12-default-state {
+		/* To Maxim max20411 */
+		pins = "gpio0", "gpio1";
+		function = "qup12";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	i2c15_default: i2c15-default-state {
+		/* To display connector (SIP1 only) */
+		pins = "gpio36", "gpio37";
+		function = "qup15";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	i2c18_default: i2c18-default-state {
+		/* To ASM330LHH IMU (SIP1 only) */
+		pins = "gpio66", "gpio67";
+		function = "qup18";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		perst-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		perst-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
new file mode 100644
index 0000000000..96b2c59ad0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "sc8280xp.dtsi"
+
+/delete-node/ &cpu0_opp_table;
+/delete-node/ &cpu4_opp_table;
+
+/ {
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <(384000 * 32)>;
+		};
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(480000 * 32)>;
+		};
+		opp-595200000 {
+			opp-hz = /bits/ 64 <595200000>;
+			opp-peak-kBps = <(576000 * 32)>;
+		};
+		opp-710400000 {
+			opp-hz = /bits/ 64 <710400000>;
+			opp-peak-kBps = <(672000 * 32)>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(768000 * 32)>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(864000 * 32)>;
+		};
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(960000 * 32)>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1075200 * 32)>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1286400 * 32)>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(1382400 * 32)>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(1593600 * 32)>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(864000 * 32)>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <(960000 * 32)>;
+		};
+		opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(1286400 * 32)>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1382400 * 32)>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1593600 * 32)>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(1593600 * 32)>;
+		};
+		opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2284800000 {
+			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2496000000 {
+			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2592000000 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+	};
+};
+
+&gpucc {
+	status = "disabled";
+};
+
+&gpu_smmu {
+	status = "disabled";
+};
+
+&pcie2a {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <0>;
+
+	interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie2b {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <1>;
+
+	interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie3a {
+	compatible = "qcom,pcie-sa8540p";
+	reg = <0x0 0x01c10000 0x0 0x3000>,
+	      <0x0 0x40000000 0x0 0xf1d>,
+	      <0x0 0x40000f20 0x0 0xa8>,
+	      <0x0 0x40001000 0x0 0x1000>,
+	      <0x0 0x40100000 0x0 0x100000>;
+	reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+	ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1d00000>;
+
+	linux,pci-domain = <2>;
+
+	interrupts = <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+
+	interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pcie3b {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <3>;
+
+	interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie4 {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <4>;
+
+	interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&rpmhpd {
+	compatible = "qcom,sa8540p-rpmhpd";
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
new file mode 100644
index 0000000000..eaa43f022a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmm8654au_0_thermal: pm8775-0-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_0_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmm8654au_1_thermal: pm8775-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmm8654au_2_thermal: pm8775-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmm8654au_3_thermal: pm8775-3-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_3_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&reboot_reason>;
+		nvmem-cell-names = "reboot-mode";
+		mode-recovery = <0x01>;
+		mode-bootloader = <0x02>;
+	};
+};
+
+&spmi_bus {
+	pmm8654au_0: pmic@0 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_0_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_0_pon: pon@1200 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1200>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pmm8654au_0_pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				debounce = <15625>;
+			};
+
+			pmm8654au_0_pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				status = "disabled";
+			};
+		};
+
+		pmm8654au_0_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_0_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmm8654au_0_sdam_0: nvram@7100 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7100 0x100>;
+
+			reboot_reason: reboot-reason@48 {
+				reg = <0x48 0x1>;
+				bits = <1 7>;
+			};
+		};
+	};
+
+	pmm8654au_1: pmic@2 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_1_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_1_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8654au_2: pmic@4 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_2_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8654au_3: pmic@6 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_3_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_3_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_3_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
new file mode 100644
index 0000000000..81a7eeb9cf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -0,0 +1,832 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8775p.dtsi"
+#include "sa8775p-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SA8775P Ride";
+	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+		i2c11 = &i2c11;
+		i2c18 = &i2c18;
+		serial0 = &uart10;
+		serial1 = &uart12;
+		serial2 = &uart17;
+		spi16 = &spi16;
+		ufshc1 = &ufs_mem_hc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/*
+			 * FIXME: This should have regulator-allow-set-load but
+			 * we're getting an over-current fault from the PMIC
+			 * when switching to LPM.
+			 */
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-mode = "sgmii";
+	phy-handle = <&sgmii_phy0>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sgmii_phy0: phy@8 {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+
+		sgmii_phy1: phy@a {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0xa>;
+			device_type = "ethernet-phy";
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-mode = "sgmii";
+	phy-handle = <&sgmii_phy1>;
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&qup_i2c11_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c18 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&qup_i2c18_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pmm8654au_0_gpios {
+	gpio-line-names = "DS_EN",
+			  "POFF_COMPLETE",
+			  "UFS0_VER_ID",
+			  "FAST_POFF",
+			  "DBU1_PON_DONE",
+			  "AOSS_SLEEP",
+			  "CAM_DES0_EN",
+			  "CAM_DES1_EN",
+			  "CAM_DES2_EN",
+			  "CAM_DES3_EN",
+			  "UEFI",
+			  "ANALOG_PON_OPT";
+};
+
+&pmm8654au_1_gpios {
+	gpio-line-names = "PMIC_C_ID0",
+			  "PMIC_C_ID1",
+			  "UFS1_VER_ID",
+			  "IPA_PWR",
+			  "",
+			  "WLAN_DBU4_EN",
+			  "WLAN_EN",
+			  "BT_EN",
+			  "USB2_PWR_EN",
+			  "USB2_FAULT";
+
+	usb2_en_state: usb2-en-state {
+		pins = "gpio9";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_2_gpios {
+	gpio-line-names = "PMIC_E_ID0",
+			  "PMIC_E_ID1",
+			  "USB0_PWR_EN",
+			  "USB0_FAULT",
+			  "SENSOR_IRQ_1",
+			  "SENSOR_IRQ_2",
+			  "SENSOR_RST",
+			  "SGMIIO0_RST",
+			  "SGMIIO1_RST",
+			  "USB1_PWR_ENABLE",
+			  "USB1_FAULT",
+			  "VMON_SPX8";
+
+	usb0_en_state: usb0-en-state {
+		pins = "gpio3";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+
+	usb1_en_state: usb1-en-state {
+		pins = "gpio10";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_3_gpios {
+	gpio-line-names = "PMIC_G_ID0",
+			  "PMIC_G_ID1",
+			  "GNSS_RST",
+			  "GNSS_EN",
+			  "GNSS_BOOT_MODE";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&serdes1 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&spi16 {
+	pinctrl-0 = <&qup_spi16_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	qup_uart10_default: qup-uart10-state {
+		pins = "gpio46", "gpio47";
+		function = "qup1_se3";
+	};
+
+	qup_spi16_default: qup-spi16-state {
+		pins = "gpio86", "gpio87", "gpio88", "gpio89";
+		function = "qup2_se2";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	qup_i2c11_default: qup-i2c11-state {
+		pins = "gpio48", "gpio49";
+		function = "qup1_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_i2c18_default: qup-i2c18-state {
+		pins = "gpio95", "gpio96";
+		function = "qup2_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart12_default: qup-uart12-state {
+		qup_uart12_cts: qup-uart12-cts-pins {
+			pins = "gpio52";
+			function = "qup1_se5";
+			bias-disable;
+		};
+
+		qup_uart12_rts: qup-uart12-rts-pins {
+			pins = "gpio53";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+
+		qup_uart12_tx: qup-uart12-tx-pins {
+			pins = "gpio54";
+			function = "qup1_se5";
+			bias-pull-up;
+		};
+
+		qup_uart12_rx: qup-uart12-rx-pins {
+			pins = "gpio55";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+	};
+
+	qup_uart17_default: qup-uart17-state {
+		qup_uart17_cts: qup-uart17-cts-pins {
+			pins = "gpio91";
+			function = "qup2_se3";
+			bias-disable;
+		};
+
+		qup_uart17_rts: qup0-uart17-rts-pins {
+			pins = "gpio92";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+
+		qup_uart17_tx: qup0-uart17-tx-pins {
+			pins = "gpio93";
+			function = "qup2_se3";
+			bias-pull-up;
+		};
+
+		qup_uart17_rx: qup0-uart17-rx-pins {
+			pins = "gpio94";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio3";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio5";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	pinctrl-0 = <&qup_uart10_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-0 = <&qup_uart12_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart17 {
+	pinctrl-0 = <&qup_uart17_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_state>;
+
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_state>;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_en_state>;
+
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
new file mode 100644
index 0000000000..d4ca92b98c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -0,0 +1,2603 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
+#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_1>;
+				L3_1: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+
+			};
+		};
+
+		CPU5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_5>;
+			L2_5: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_1>;
+			};
+		};
+
+		CPU6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_6>;
+			L2_6: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_1>;
+			};
+		};
+
+		CPU7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_7>;
+			L2_7: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sa8775p", "qcom,scm";
+		};
+	};
+
+	aggre1_noc: interconnect-aggre1-noc {
+		compatible = "qcom,sa8775p-aggre1-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	aggre2_noc: interconnect-aggre2-noc {
+		compatible = "qcom,sa8775p-aggre2-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	clk_virt: interconnect-clk-virt {
+		compatible = "qcom,sa8775p-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	config_noc: interconnect-config-noc {
+		compatible = "qcom,sa8775p-config-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	dc_noc: interconnect-dc-noc {
+		compatible = "qcom,sa8775p-dc-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gem_noc: interconnect-gem-noc {
+		compatible = "qcom,sa8775p-gem-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gpdsp_anoc: interconnect-gpdsp-anoc {
+		compatible = "qcom,sa8775p-gpdsp-anoc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	lpass_ag_noc: interconnect-lpass-ag-noc {
+		compatible = "qcom,sa8775p-lpass-ag-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sa8775p-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mmss_noc: interconnect-mmss-noc {
+		compatible = "qcom,sa8775p-mmss-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspa_noc: interconnect-nspa-noc {
+		compatible = "qcom,sa8775p-nspa-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspb_noc: interconnect-nspb-noc {
+		compatible = "qcom,sa8775p-nspb-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	pcie_anoc: interconnect-pcie-anoc {
+		compatible = "qcom,sa8775p-pcie-anoc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	system_noc: interconnect-system-noc {
+		compatible = "qcom,sa8775p-system-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	/* Will be updated by the bootloader. */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sail_ss_mem: sail-ss@80000000 {
+			reg = <0x0 0x80000000 0x0 0x10000000>;
+			no-map;
+		};
+
+		hyp_mem: hyp@90000000 {
+			reg = <0x0 0x90000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_boot_mem: xbl-boot@90600000 {
+			reg = <0x0 0x90600000 0x0 0x200000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@90800000 {
+			reg = <0x0 0x90800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@90860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x90860000 0x0 0x20000>;
+			no-map;
+		};
+
+		uefi_log: uefi-log@908b0000 {
+			reg = <0x0 0x908b0000 0x0 0x10000>;
+			no-map;
+		};
+
+		reserved_mem: reserved@908f0000 {
+			reg = <0x0 0x908f0000 0x0 0xf000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@908ff000 {
+			reg = <0x0 0x908ff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: smem@90900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x90900000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		cpucp_fw_mem: cpucp-fw@90b00000 {
+			reg = <0x0 0x90b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		lpass_machine_learning_mem: lpass-machine-learning@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0xf00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x800000>;
+			no-map;
+		};
+
+		pil_camera_mem: pil-camera@95200000 {
+			reg = <0x0 0x95200000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@95c00000 {
+			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp0_mem: pil-gdsp0@97b00000 {
+			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp1_mem: pil-gdsp1@99900000 {
+			reg = <0x0 0x99900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cdsp0_mem: pil-cdsp0@9b800000 {
+			reg = <0x0 0x9b800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gpu_mem: pil-gpu@9d600000 {
+			reg = <0x0 0x9d600000 0x0 0x2000>;
+			no-map;
+		};
+
+		pil_cdsp1_mem: pil-cdsp1@9d700000 {
+			reg = <0x0 0x9d700000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cvp_mem: pil-cvp@9f500000 {
+			reg = <0x0 0x9f500000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@9fc00000 {
+			reg = <0x0 0x9fc00000 0x0 0x700000>;
+			no-map;
+		};
+
+		hyptz_reserved_mem: hyptz-reserved@beb00000 {
+			reg = <0x0 0xbeb00000 0x0 0x11500000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@d0000000 {
+			reg = <0x0 0xd0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@d0100000 {
+			reg = <0x0 0xd0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d1300000 {
+			reg = <0x0 0xd1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@d1800000 {
+			reg = <0x0 0xd1800000 0x0 0x3900000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sa8775p-gcc";
+			reg = <0x0 0x00100000 0x0 0xc7018>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&usb_0_qmpphy>,
+				 <&usb_1_qmpphy>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SA8775P_CX>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
+			reg = <0x0 0x00408000 0x0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x5a3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x880000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x880000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x884000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x884000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x888000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x88c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x88c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart17: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x890000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x894000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x894000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c20: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x898000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi20: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x898000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x403 0x0>;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x443 0x0>;
+			status = "disabled";
+
+			i2c7: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi7: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi8: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi9: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart9: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi10: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart10: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interconnect-names = "qup-core", "qup-config";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0
+						 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0
+						 &config_noc SLAVE_QUP_1 0>;
+				power-domains = <&rpmhpd SA8775P_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi11: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi12: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart12: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_3: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xbc0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			status = "disabled";
+
+			i2c21: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+						&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+							 "qup-config",
+							 "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi21: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+						&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+							 "qup-config",
+							 "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+			iommus = <&apps_smmu 0x100 0x0>;
+			dma-coherent;
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sa8775p-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe10>;
+			/*
+			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
+			 * enables the CXO clock to eDP *and* UFS PHY.
+			 */
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_EDP_REF_CLKREF_EN>;
+			clock-names = "ref", "ref_aux", "qref";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb_0_hsphy: phy@88e4000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e4000 0 0x120>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@88e8000 {
+			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+			reg = <0 0x088e8000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_0: usb@a6f8800 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_0_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xe000>;
+				interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x080 0x0>;
+				phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usb_1_hsphy: phy@88e6000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e6000 0 0x120>;
+			clocks = <&gcc GCC_USB_CLKREF_EN>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1_qmpphy: phy@88ea000 {
+			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+			reg = <0 0x088ea000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_sec_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a8f8800 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xe000>;
+				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x0a0 0x0>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usb_2_hsphy: phy@88e7000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e7000 0 0x120>;
+			clocks = <&gcc GCC_USB_CLKREF_EN>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB3_PHY_TERT_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2: usb@a4f8800 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+			reg = <0 0x0a4f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc USB20_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a400000 0 0xe000>;
+				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x020 0x0>;
+				phys = <&usb_2_hsphy>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sa8775p-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serdes0: phy@8901000 {
+			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08901000 0x0 0xe10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		serdes1: phy@8902000 {
+			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08902000 0x0 0xe10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 2>,
+					  <70 520 1>,
+					  <73 523 1>,
+					  <118 568 6>,
+					  <124 609 3>,
+					  <159 638 1>,
+					  <160 720 3>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 2>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 2>,
+					  <228 440 1>,
+					  <229 663 1>,
+					  <230 524 2>,
+					  <232 612 3>,
+					  <235 723 5>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					       IPCC_MPROC_SIGNAL_GLINK_QMP
+					       IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+			#clock-cells = <0>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,sa8775p-tlmm";
+			reg = <0x0 0x0f000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 149>;
+			wakeup-parent = <&pdc>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie_smmu: iommu@15200000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15200000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+
+			interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
+			reg = <0x0 0x17c10000 0x0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		memtimer: timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 2>,
+					  <SLEEP_TCS 3>,
+					  <WAKE_TCS 3>,
+					  <CONTROL_TCS 0>;
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sa8775p-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board_clk>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sa8775p-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sa8775p-cpufreq-epss",
+				     "qcom,cpufreq-epss";
+			reg = <0x0 0x18591000 0x0 0x1000>,
+			      <0x0 0x18593000 0x0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+
+		ethernet1: ethernet@23000000 {
+			compatible = "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23000000 0x0 0x10000>,
+			      <0x0 0x23016000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
+				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC1_PTP_CLK>,
+				 <&gcc GCC_EMAC1_PHY_AUX_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+
+			power-domains = <&gcc EMAC1_GDSC>;
+
+			phys = <&serdes1>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x140 0xf>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <16384>;
+
+			status = "disabled";
+		};
+
+		ethernet0: ethernet@23040000 {
+			compatible = "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23040000 0x0 0x10000>,
+			      <0x0 0x23056000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC0_PTP_CLK>,
+				 <&gcc GCC_EMAC0_PHY_AUX_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+
+			power-domains = <&gcc EMAC0_GDSC>;
+
+			phys = <&serdes0>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x120 0xf>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <16384>;
+
+			status = "disabled";
+		};
+	};
+
+	arch_timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pcie0: pci@1c00000{
+		compatible = "qcom,pcie-sa8775p";
+		reg = <0x0 0x01c00000 0x0 0x3000>,
+		      <0x0 0x40000000 0x0 0xf20>,
+		      <0x0 0x40000f20 0x0 0xa8>,
+		      <0x0 0x40001000 0x0 0x4000>,
+		      <0x0 0x40100000 0x0 0x100000>,
+		      <0x0 0x01c03000 0x0 0x1000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+		device_type = "pci";
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+			 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+		bus-range = <0x00 0xff>;
+
+		dma-coherent;
+
+		linux,pci-domain = <0>;
+		num-lanes = <2>;
+
+		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi0", "msi1", "msi2", "msi3",
+				  "msi4", "msi5", "msi6", "msi7";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+			 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+			    <0x100 &pcie_smmu 0x0001 0x1>;
+
+		resets = <&gcc GCC_PCIE_0_BCR>;
+		reset-names = "pci";
+		power-domains = <&gcc PCIE_0_GDSC>;
+
+		phys = <&pcie0_phy>;
+		phy-names = "pciephy";
+
+		status = "disabled";
+	};
+
+	pcie0_phy: phy@1c04000 {
+		compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
+		reg = <0x0 0x1c04000 0x0 0x2000>;
+
+		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_CLKREF_EN>,
+			 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_0_PIPE_CLK>,
+			 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
+			 <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
+
+		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
+			      "pipediv2", "phy_aux";
+
+		assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+		assigned-clock-rates = <100000000>;
+
+		resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+		reset-names = "phy";
+
+		#clock-cells = <0>;
+		clock-output-names = "pcie_0_pipe_clk";
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+
+	pcie1: pci@1c10000{
+		compatible = "qcom,pcie-sa8775p";
+		reg = <0x0 0x01c10000 0x0 0x3000>,
+		      <0x0 0x60000000 0x0 0xf20>,
+		      <0x0 0x60000f20 0x0 0xa8>,
+		      <0x0 0x60001000 0x0 0x4000>,
+		      <0x0 0x60100000 0x0 0x100000>,
+		      <0x0 0x01c13000 0x0 0x1000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+		device_type = "pci";
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+			 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>;
+		bus-range = <0x00 0xff>;
+
+		dma-coherent;
+
+		linux,pci-domain = <1>;
+		num-lanes = <4>;
+
+		interrupts = <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi0", "msi1", "msi2", "msi3",
+				  "msi4", "msi5", "msi6", "msi7";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
+			    <0x100 &pcie_smmu 0x0081 0x1>;
+
+		resets = <&gcc GCC_PCIE_1_BCR>;
+		reset-names = "pci";
+		power-domains = <&gcc PCIE_1_GDSC>;
+
+		phys = <&pcie1_phy>;
+		phy-names = "pciephy";
+
+		status = "disabled";
+	};
+
+	pcie1_phy: phy@1c14000 {
+		compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
+		reg = <0x0 0x1c14000 0x0 0x4000>;
+
+		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_CLKREF_EN>,
+			 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_1_PIPE_CLK>,
+			 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>,
+			 <&gcc GCC_PCIE_1_PHY_AUX_CLK>;
+
+		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
+			      "pipediv2", "phy_aux";
+
+		assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+		assigned-clock-rates = <100000000>;
+
+		resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+		reset-names = "phy";
+
+		#clock-cells = <0>;
+		clock-output-names = "pcie_1_pipe_clk";
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
new file mode 100644
index 0000000000..3342cb0480
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -0,0 +1,860 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc7180.dtsi"
+
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/delete-node/ &tz_mem;
+/delete-node/ &ipa_fw_mem;
+
+/ {
+	model = "Acer Aspire 1";
+	compatible = "acer,aspire1", "qcom,sc7180";
+	chassis-type = "laptop";
+
+	aliases {
+		bluetooth0 = &bluetooth;
+		hsuart0 = &uart3;
+		serial0 = &uart8;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		zap_mem: zap-shader@80840000 {
+			reg = <0x0 0x80840000 0 0x2000>;
+			no-map;
+		};
+
+		venus_mem: venus@85b00000 {
+			reg = <0x0 0x85b00000 0 0x500000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86000000 {
+			reg = <0x0 0x86000000 0x0 0x2000000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8e400000 {
+			reg = <0x0 0x8e400000 0x0 0x2800000>;
+			no-map;
+		};
+
+		wlan_mem: wlan@93900000 {
+			reg = <0x0 0x93900000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	max98357a: audio-codec {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&amp_sd_mode_default>;
+		pinctrl-names = "default";
+
+		#sound-dai-cells = <0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&sn65dsi86_bridge 1000000>;
+		enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&soc_bkoff_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_brij_1p2: bridge-1p2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "brij_1p2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_edp_1p2_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_brij_1p8: bridge-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "brij_1p8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vreg_l8c_1p8>;
+
+		gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_edp_1p8_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_codec_3p3: codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "codec_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_audio_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_lcm_3p3: panel-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcm_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_lcm_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tp_3p3: touchpad-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "tp_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_tp_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* embedded-controller@76 */
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/*
+	 * NOTE: DSDT defines two possible touchpads, other one is
+	 *
+	 * reg = <0x15>;
+	 * hid-descr-addr = <0x1>;
+	 */
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		vdd-supply = <&reg_tp_3p3>;
+
+		interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&hid_touchpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&hid_keyboard_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682i";
+		reg = <0x1a>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-0 = <&codec_irq_default>;
+		pinctrl-names = "default";
+
+		AVDD-supply = <&vreg_l15a_1p8>;
+		MICVDD-supply = <&reg_codec_3p3>;
+		VBAT-supply = <&reg_codec_3p3>;
+		DBVDD-supply = <&vreg_l15a_1p8>;
+		LDO1-IN-supply = <&vreg_l15a_1p8>;
+
+		/*
+		 * NOTE: The board has a path from this codec to the
+		 * DMIC microphones in the lid, however some of the option
+		 * resistors are absent and the microphones are connected
+		 * to the SoC instead.
+		 *
+		 * If the resistors were to be changed by the user to
+		 * connect the codec, the following could be used:
+		 *
+		 * realtek,dmic1-data-pin = <1>;
+		 * realtek,dmic1-clk-pin = <1>;
+		 */
+
+		realtek,jd-src = <1>;
+	};
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sn65dsi86_bridge: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#pwm-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&bridge_en_default>,
+			    <&edp_bridge_irq_default>,
+			    <&bridge_suspend_default>;
+		pinctrl-names = "default";
+
+		vpll-supply = <&reg_brij_1p8>;
+		vccio-supply = <&reg_brij_1p8>;
+		vcca-supply = <&reg_brij_1p2>;
+		vcc-supply = <&reg_brij_1p2>;
+
+		clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
+		clock-names = "refclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sn65dsi86_out: endpoint {
+					data-lanes = <0 1>;
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&reg_lcm_3p3>;
+				backlight = <&backlight>;
+				hpd-absent-delay-ms = <200>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&sn65dsi86_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&zap_mem>;
+		firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3c_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l4a_0p8>;
+	status = "okay";
+};
+
+&pm6150_adc {
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "thermistor";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "charger_thermistor";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	charger-thermistor@0 {
+		reg = <0>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6150_pon {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_default>;
+	pinctrl-1 = <&sdc1_sleep>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l19a_2p9>;
+	vqmmc-supply = <&vreg_l12a_1p8>;
+
+	status = "okay";
+};
+
+&uart3 {
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&qup_uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3991-bt";
+		vddio-supply = <&vreg_l10a_1p8>;
+		vddxo-supply = <&vreg_l1c_1p8>;
+		vddrf-supply = <&vreg_l2c_1p3>;
+		vddch0-supply = <&vreg_l10c_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l4a_0p8>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
+	qcom,imp-res-offset-value = <8>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,bias-ctrl-value = <0x22>;
+	qcom,charge-ctrl-value = <3>;
+	qcom,hsdisc-trim-value = <0>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l4a_0p8>;
+
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
+	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
+
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_l4a_0p8: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_0p6: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p8: ldo18 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_2p9: ldo19 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&qup_i2c2_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c4_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c9_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&tlmm {
+	/*
+	 * The TZ seem to protect those because some boards can have
+	 * fingerprint sensor connected to this range. Not connected
+	 * on this board
+	 */
+	gpio-reserved-ranges = <58 5>;
+
+	amp_sd_mode_default: amp-sd-mode-deault-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	bridge_en_default: bridge-en-default-state {
+		pins = "gpio51";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	bridge_suspend_default: bridge-suspend-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	codec_irq_default: codec-irq-deault-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_bridge_irq_default: edp-bridge-irq-default-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	hid_keyboard_default: hid-keyboard-default-state {
+		pins = "gpio33";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	hid_touchpad_default: hid-touchpad-default-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
+			/*
+			 * Configure a pull-down on CTS to match the pull of
+			 * the Bluetooth module.
+			 */
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		rts-pins {
+			/*
+			 * Configure pull-down on RTS. As RTS is active low
+			 * signal, pull it low to indicate the BT SoC that it
+			 * can wakeup the system anytime from suspend state by
+			 * pulling RX low (by sending wakeup bytes).
+			 */
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		tx-pins {
+			/*
+			 * Configure pull-up on TX when it isn't actively driven
+			 * to prevent BT SoC from receiving garbage during sleep.
+			 */
+			pins = "gpio40";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		rx-pins {
+			/*
+			 * Configure a pull-up on RX. This is needed to avoid
+			 * garbage data when the TX pin of the Bluetooth module
+			 * is floating which may cause spurious wakeups.
+			 */
+			pins = "gpio41";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state {
+		pins = "gpio19";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	reg_lcm_en_default: reg-lcm-en-deault-state {
+		pins = "gpio26";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	reg_audio_en_default: reg-audio-en-deault-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	reg_tp_en_default: reg-tp-en-deault-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	soc_bkoff_default: soc-bkoff-deault-state {
+		pins = "gpio10";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	sdc1_default: sdc1-default-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_sleep: sdc1-sleep-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi b/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
new file mode 100644
index 0000000000..ee35a454db
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * Devices that use SC7180 with TrustedFirmware-A
+ * need PSCI PC mode instead of the OSI mode provided
+ * by Qualcomm firmware.
+ */
+
+&CPU0 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU1 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU2 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU3 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU4 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU5 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU6 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU7 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+/delete-node/ &domain_idle_states;
+
+&idle_states {
+	CLUSTER_SLEEP_0: cluster-sleep-0 {
+		compatible = "arm,idle-state";
+		idle-state-name = "cluster-power-down";
+		arm,psci-suspend-param = <0x40003444>;
+		entry-latency-us = <3263>;
+		exit-latency-us = <6562>;
+		min-residency-us = <9926>;
+		local-timer-stop;
+	};
+};
+
+/delete-node/ &CPU_PD0;
+/delete-node/ &CPU_PD1;
+/delete-node/ &CPU_PD2;
+/delete-node/ &CPU_PD3;
+/delete-node/ &CPU_PD4;
+/delete-node/ &CPU_PD5;
+/delete-node/ &CPU_PD6;
+/delete-node/ &CPU_PD7;
+/delete-node/ &CLUSTER_PD;
+
+&apps_rsc {
+	/delete-property/ power-domains;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
new file mode 100644
index 0000000000..0146fb0036
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -0,0 +1,767 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 IDP board device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "sc7180.dtsi"
+#include "sc7180-firmware-tfa.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SC7180 IDP";
+	compatible = "qcom,sc7180-idp", "qcom,sc7180";
+
+	aliases {
+		bluetooth0 = &bluetooth;
+		hsuart0 = &uart3;
+		serial0 = &uart8;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the board dts.
+ *
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &aop_mem;
+/delete-node/ &sec_apps_mem;
+/delete-node/ &tz_mem;
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x94600000 0x0 0x800000>;
+};
+
+/ {
+	reserved-memory {
+		atf_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		mpss_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x8c00000>;
+			no-map;
+		};
+
+		camera_mem: memory@8ec00000 {
+			reg = <0x0 0x8ec00000 0x0 0x500000>;
+			no-map;
+		};
+
+		venus_mem: memory@8f600000 {
+			reg = <0 0x8f600000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@94100000 {
+			reg = <0x0 0x94100000 0x0 0x200000>;
+			no-map;
+		};
+
+		mba_mem: memory@94400000 {
+			reg = <0x0 0x94400000 0x0 0x200000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s4a_1p0: smps4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1744000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_l1a_1p2: ldo1 {
+			regulator-min-microvolt = <1178000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <968000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4a_0p8: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_2p7: ldo5 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-min-microvolt = <568000>;
+			regulator-max-microvolt = <648000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p6: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_2p8: ldo18 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l19a_2p9: ldo19 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	panel@0 {
+		compatible = "visionox,rm69299-1080p-display";
+		reg = <0>;
+
+		vdda-supply = <&vreg_l8c_1p8>;
+		vdd3p3-supply = <&vreg_l18a_2p8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&disp_pins>;
+
+		reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&panel0_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l4a_0p8>;
+};
+
+&qfprom {
+	vcc-supply = <&vreg_l11a_1p8>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	compatible = "qcom,sc7180-mss-pil";
+	reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
+
+	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+		 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+		 <&gcc GCC_MSS_NAV_AXI_CLK>,
+		 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+		 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo";
+
+	iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+	memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+		 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+	reset-names = "mss_restart", "pdc_reset";
+
+	qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+	qcom,spare-regs = <&tcsr_regs_2 0xb3e4>;
+};
+
+&scm {
+	/* TF-A firmware maps memory cached so mark dma-coherent to match. */
+	dma-coherent;
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	vmmc-supply = <&vreg_l19a_2p9>;
+	vqmmc-supply = <&vreg_l12a_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+};
+
+&uart3 {
+	status = "okay";
+
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart3_sleep>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3990-bt";
+		vddio-supply = <&vreg_l10a_1p8>;
+		vddxo-supply = <&vreg_l1c_1p8>;
+		vddrf-supply = <&vreg_l2c_1p3>;
+		vddch0-supply = <&vreg_l10c_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdd-supply = <&vreg_l4a_0p8>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
+	qcom,imp-res-offset-value = <8>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,bias-ctrl-value = <0x22>;
+	qcom,charge-ctrl-value = <3>;
+	qcom,hsdisc-trim-value = <0>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l4a_0p8>;
+};
+
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x0c42 0x0>;
+	};
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
+	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
+	wifi-firmware {
+		iommus = <&apps_smmu 0xc2 0x1>;
+	};
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&pm6150l_gpios {
+	disp_pins: disp-state {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_FUNC1;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
+			power-source = <0>;
+			bias-disable;
+			output-low;
+		};
+	};
+};
+
+&qspi_clk {
+	bias-disable;
+};
+
+&qspi_cs0 {
+	bias-disable;
+};
+
+&qspi_data0 {
+	bias-pull-up;
+};
+
+&qspi_data1 {
+	bias-pull-up;
+};
+
+&qup_i2c2_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c4_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c7_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c9_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_uart3_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
+
+&qup_uart3_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&qup_uart8_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart8_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_spi0_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi0_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&tlmm {
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
+			/*
+			 * Configure a pull-down on CTS to match the pull of
+			 * the Bluetooth module.
+			 */
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		rts-pins {
+			/*
+			 * Configure pull-down on RTS. As RTS is active low
+			 * signal, pull it low to indicate the BT SoC that it
+			 * can wakeup the system anytime from suspend state by
+			 * pulling RX low (by sending wakeup bytes).
+			 */
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		tx-pins {
+			/*
+			 * Configure pull-up on TX when it isn't actively driven
+			 * to prevent BT SoC from receiving garbage during sleep.
+			 */
+			pins = "gpio40";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		rx-pins {
+			/*
+			 * Configure a pull-up on RX. This is needed to avoid
+			 * garbage data when the TX pin of the Bluetooth module
+			 * is floating which may cause spurious wakeups.
+			 */
+			pins = "gpio41";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
new file mode 100644
index 0000000000..4b306a59d9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 lite device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+&cpu6_opp10 {
+	opp-peak-kBps = <7216000 22425600>;
+};
+
+&cpu6_opp11 {
+	opp-peak-kBps = <7216000 22425600>;
+};
+
+&cpu6_opp12 {
+	opp-peak-kBps = <8532000 23347200>;
+};
+
+&cpu6_opp13 {
+	opp-peak-kBps = <8532000 23347200>;
+};
+
+&cpu6_opp14 {
+	opp-peak-kBps = <8532000 23347200>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
new file mode 100644
index 0000000000..82dc00cc7f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-coachz-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google CoachZ (rev1 - 2) with LTE";
+	compatible = "google,coachz-rev1-sku0", "google,coachz-rev2-sku0", "qcom,sc7180";
+};
+
+&cros_ec_proximity {
+	label = "proximity-wifi-lte";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
new file mode 100644
index 0000000000..03d350dcec
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-coachz.dtsi"
+
+/ {
+	model = "Google CoachZ (rev1 - 2)";
+	compatible = "google,coachz-rev1", "google,coachz-rev2", "qcom,sc7180";
+};
+
+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
+&pm6150_adc {
+	/delete-node/ channel@4e;
+	/delete-node/ channel@4f;
+};
+
+&pm6150_adc_tm {
+	status = "disabled";
+
+	/delete-node/ charger-thermistor@0;
+	/delete-node/ skin-temp-thermistor@1;
+};
+
+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature,
+ * which currently is not supported by the PM6150 ADC driver. Disable the
+ * skin temperature thermal zone to avoid using bogus temperature values.
+ */
+&skin_temp_thermal {
+	status = "disabled";
+};
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "FP_TO_AP_IRQ_L",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "FPMCU_BOOT0",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "WLC_IRQ",
+			  "FP_RST_L",
+			  "AMP_EN",
+			  "WLC_NRST",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "EN_PP3300_DX_EDP",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "FPMCU_SEL",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT_L",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "DMIC_CLK_EN",
+			  "HUB_EN",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
new file mode 100644
index 0000000000..d23409034e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor-coachz-r3.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google CoachZ (rev3+) with LTE";
+	compatible = "google,coachz-sku0", "qcom,sc7180";
+};
+
+&cros_ec_proximity {
+	label = "proximity-wifi-lte";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
new file mode 100644
index 0000000000..a02d2d57c7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-coachz.dtsi"
+
+/ {
+	model = "Google CoachZ (rev3+)";
+	compatible = "google,coachz", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
new file mode 100644
index 0000000000..a532cc4aac
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+
+/* Deleted nodes from sc7180-trogdor.dtsi */
+
+/delete-node/ &alc5682;
+/delete-node/ &pp3300_codec;
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	adau7002: audio-codec-1 {
+		compatible = "adi,adau7002";
+		IOVDD-supply = <&pp1800_l15a>;
+		wakeup-delay-ms = <80>;
+		#sound-dai-cells = <0>;
+	};
+
+	thermal-zones {
+		skin_temp_thermal: skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150_adc_tm 1>;
+			sustainable-power = <965>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <42000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <45000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <60000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&ap_spi_fp {
+	status = "okay";
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+	status = "okay";
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+
+	cros_ec_proximity: proximity {
+		compatible = "google,cros-ec-mkbp-proximity";
+		label = "proximity-wifi";
+	};
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&i2c9 {
+	status = "disabled";
+};
+
+&panel {
+	compatible = "boe,nv110wtm-n61";
+};
+
+&pm6150_adc {
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	skin-temp-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
+&pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&sn65dsi86_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&sound {
+	compatible = "google,sc7180-coachz";
+	model = "sc7180-adau7002-max98357a";
+	audio-routing = "PDM_DAT", "DMIC";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dmic_clk_en>;
+};
+
+&sound_multimedia0_codec {
+	sound-dai = <&adau7002>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+&ts_reset_l {
+	/*
+	 * We want reset state by default and it will be up to the
+	 * driver to disable this when it's ready.
+	 */
+	output-low;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "FP_TO_AP_IRQ_L",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "FPMCU_BOOT0",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "WLC_IRQ",
+			  "FP_RST_L",
+			  "AMP_EN",
+			  "WLC_NRST",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT_L",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "",
+			  "HUB_EN",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	dmic_clk_en: dmic-clk-en-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
new file mode 100644
index 0000000000..d9e905ed4e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-homestar.dtsi"
+
+/ {
+	model = "Google Homestar (rev2)";
+	compatible = "google,homestar-rev2","google,homestar-rev23", "qcom,sc7180";
+};
+
+&panel {
+	/delete-property/hpd-gpios;
+	no-hpd;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
new file mode 100644
index 0000000000..242c178fdc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-homestar.dtsi"
+
+/ {
+	model = "Google Homestar (rev3)";
+	compatible = "google,homestar-rev3", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
new file mode 100644
index 0000000000..66dd870162
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-homestar.dtsi"
+
+/ {
+	model = "Google Homestar (rev4+)";
+	compatible = "google,homestar", "qcom,sc7180";
+};
+
+&pp3300_brij_ps8640 {
+	regulator-enable-ramp-delay = <4000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
new file mode 100644
index 0000000000..b27dcd2ec8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	max98360a_1: amplifier-1 {
+		compatible = "maxim,max98360a";
+		#sound-dai-cells = <0>;
+	};
+
+	max98360a_2: amplifier-2 {
+		compatible = "maxim,max98360a";
+		#sound-dai-cells = <0>;
+	};
+
+	max98360a_3: amplifier-3 {
+		compatible = "maxim,max98360a";
+		#sound-dai-cells = <0>;
+	};
+
+	pp3300_touch: pp3300-touch-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_touch";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_touch>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	thermal-zones {
+		skin_temp_thermal: skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150_adc_tm 1>;
+			sustainable-power = <965>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_dx_edp {
+	/*
+	 * The atna33xc20 really likes to be power cycled to keep it from
+	 * getting in a bad state. This is the reason that the touchscreen
+	 * rail and eDP rails are separate from each other on homestar (but
+	 * not other trogdor devices) Make sure it starts "off" at bootup.
+	 */
+	/delete-property/ regulator-boot-on;
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@14 {
+		compatible = "goodix,gt7375p";
+		reg = <0x14>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&pp3300_touch>;
+	};
+};
+
+/* Panel controls backlight over aux channel */
+
+&backlight {
+	status = "disabled";
+};
+
+&camcc {
+	status = "okay";
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&panel {
+	compatible = "samsung,atna33xc20";
+	enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	/delete-property/ backlight;
+};
+
+&pm6150_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	skin-temp-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
+&pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&secondary_mi2s {
+	qcom,playback-sd-lines = <0 1>;
+};
+
+&sound_multimedia1_codec {
+	sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ;
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_HOMESTAR";
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+&sec_mi2s_active {
+	pins = "gpio49", "gpio50", "gpio51", "gpio52";
+};
+
+&ts_reset_l {
+	/*
+	 * We want reset state by default and it will be up to the
+	 * driver to disable this when it's ready.
+	 */
+	output-low;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "AVEE_LCD_EN",
+			  "",
+			  "AMP_EN",
+			  "AMP_EN2",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "SEL_LCM",
+			  "HP_IRQ",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "BT_UART_CTS",
+			  "BT_UART_RTS",
+			  "BT_UART_TXD",
+			  "BT_UART_RXD",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "AMP_DIN_2",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "WLAN_SW_CTRL",
+			  "",
+			  "REPORT_E",
+			  "VDD_RESET_1.8V",
+			  "ID0",
+			  "",
+			  "ID1",
+			  "AVDD_LCD_EN",
+			  "MIPI_1.8V_EN",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "",
+			  "PP1800_MIPI_SW_EN",
+			  "EN_PP3300_TOUCH",
+			  "",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "SDM_GRFC_3",
+			  "",
+			  "",
+			  "BOOT_CONFIG_4",
+			  "BOOT_CONFIG_2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "BOOT_CONFIG_3",
+			  "WCI2_LTE_COEX_TXD",
+			  "WCI2_LTE_COEX_RXD",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "FORCED_USB_BOOT_POL",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	en_pp3300_touch: en-pp3300-touch-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
new file mode 100644
index 0000000000..36326ef972
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Kingoftown";
+	compatible = "google,kingoftown", "qcom,sc7180";
+};
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&ap_tp_i2c {
+	status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)       /* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)       /* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)       /* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)       /* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)       /* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)       /* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)       /* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)       /* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)       /* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)       /* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&panel {
+	compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "TP_INT_L",		/* 0 */
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",			/* 10 */
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "",			/* 20 */
+			  "",
+			  "",
+			  "AMP_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "HP_IRQ",
+			  "",
+			  "",			/* 30 */
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "BT_UART_CTS",
+			  "BT_UART_RTS",
+			  "BT_UART_TXD",	/* 40 */
+			  "BT_UART_RXD",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",		/* 50 */
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",	/* 60 */
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",			/* 70 */
+			  "",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT_L",
+			  "UIM1_DATA",
+			  "UIM1_CLK",		/* 80 */
+			  "UIM1_RST",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SKU_ID1",		/* 90 */
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",			/* 100 */
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",			/* 110 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
new file mode 100644
index 0000000000..70d5a7aa88
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-limozeen-nots-r5.dts"
+
+/ {
+	model = "Google Lazor Limozeen without Touchscreen (rev4)";
+	compatible = "google,lazor-rev4-sku5", "qcom,sc7180";
+};
+
+/*
+ * rev4-sku5 was built with a different trackpad.
+ */
+/delete-node/&trackpad;
+&ap_tp_i2c {
+	 trackpad: trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pp3300_fp_tp>;
+		hid-descr-addr = <0x20>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
new file mode 100644
index 0000000000..7f01573b55
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen without Touchscreen (rev5 - rev8)";
+	/* No sku5 post-rev5 */
+	compatible = "google,lazor-rev5-sku5", "google,lazor-rev5-sku6",
+		"google,lazor-rev6-sku6", "google,lazor-rev7-sku6",
+		"google,lazor-rev8-sku6", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&panel {
+	compatible = "innolux,n116bca-ea1";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
new file mode 100644
index 0000000000..913b5fc3ba
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen without Touchscreen (rev9+)";
+	compatible = "google,lazor-sku6", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&panel {
+	compatible = "edp-panel";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
new file mode 100644
index 0000000000..d42dcd4211
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen (rev4 - rev8)";
+	compatible = "google,lazor-rev4-sku4", "google,lazor-rev5-sku4",
+		"google,lazor-rev6-sku4", "google,lazor-rev7-sku4",
+		"google,lazor-rev8-sku4", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&ap_ts_pen_1v8 {
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&panel {
+	compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
new file mode 100644
index 0000000000..15d77dc5f9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen (rev9+)";
+	compatible = "google,lazor-sku4", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&ap_ts_pen_1v8 {
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&panel {
+	compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
new file mode 100644
index 0000000000..919bfaea61
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-r1.dts"
+
+/ {
+	model = "Google Lazor (rev1 - 2) with KB Backlight";
+	compatible = "google,lazor-rev1-sku2", "google,lazor-rev2-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
new file mode 100644
index 0000000000..eb20157f6a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev1 - 2) with LTE";
+	compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
new file mode 100644
index 0000000000..80c7108bc5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+
+/ {
+	model = "Google Lazor (rev1 - 2)";
+	compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
+};
+
+
+&usb_hub_2_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
new file mode 100644
index 0000000000..6ff81c1f7c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev3 - 8) with KB Backlight";
+	compatible = "google,lazor-rev3-sku2", "google,lazor-rev4-sku2",
+		"google,lazor-rev5-sku2", "google,lazor-rev6-sku2",
+		"google,lazor-rev7-sku2", "google,lazor-rev8-sku2",
+		"qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
new file mode 100644
index 0000000000..e58e36e359
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev3 - 8) with LTE";
+	compatible = "google,lazor-rev3-sku0", "google,lazor-rev4-sku0",
+		"google,lazor-rev5-sku0", "google,lazor-rev6-sku0",
+		"google,lazor-rev7-sku0", "google,lazor-rev8-sku0",
+		"qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
new file mode 100644
index 0000000000..76c83f88cb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev3 - 8)";
+	compatible = "google,lazor-rev3", "google,lazor-rev4",
+		"google,lazor-rev5", "google,lazor-rev6", "google,lazor-rev7",
+		"google,lazor-rev8", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
new file mode 100644
index 0000000000..960f7b7ce0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev9+) with KB Backlight";
+	compatible = "google,lazor-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
new file mode 100644
index 0000000000..38027f13b9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev9+) with LTE";
+	compatible = "google,lazor-sku0", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
new file mode 100644
index 0000000000..56dd222650
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev9+)";
+	compatible = "google,lazor", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
new file mode 100644
index 0000000000..13339b723a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include <arm/cros-ec-keyboard.dtsi>
+
+&ap_sar_sensor {
+	semtech,cs0-ground;
+	semtech,combined-sensors = <3>;
+	semtech,resolution = "fine";
+	semtech,startup-sensor = <0>;
+	semtech,proxraw-strength = <8>;
+	semtech,avg-pos-strength = <64>;
+};
+
+&ap_tp_i2c {
+	status = "okay";
+};
+
+/*
+ * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
+ * not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&panel {
+	compatible = "boe,nv133fhm-n62";
+};
+
+&pm6150_adc {
+	/delete-node/ channel@4f;
+};
+
+&pm6150_adc_tm {
+	status = "disabled";
+
+	/delete-node/ charger-thermistor@0;
+};
+
+&trackpad {
+	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_LAZOR";
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&trackpad_int_1v8_odl {
+	pins = "gpio58";
+};
+
+&ts_reset_l {
+	/* This pin is not connected on -rev0, pull up to park. */
+	/delete-property/bias-disable;
+	bias-pull-up;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "",
+			  "",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "AP_RAM_ID2",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "",
+			  "AP_RAM_ID1",
+			  "AP_SKU_ID2",
+			  "",
+			  "",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "AP_RAM_ID0",
+			  "EN_PP3300_DX_EDP",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "",
+			  "",
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "TRACKPAD_INT_1V8_ODL",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "DBG_SPI_HOLD_L",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "EN_PP3300_CODEC",
+			  "EN_PP3300_HUB",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "AP_SKU_ID0",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
new file mode 100644
index 0000000000..bffcbd141b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for LTE SKUs
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+&ap_sar_sensor {
+	label = "proximity-wifi-lte";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86000000 0x0 0x8c00000>;
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn",
+			"qcom/sc7180-trogdor/modem/qdsp6sw.mbn";
+};
+
+&ipa {
+	/*
+	 * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the
+	 * modem needs to cover certain init steps (GSI init), and
+	 * the AP needs to wait for it.
+	 */
+	qcom,gsi-loader = "modem";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
new file mode 100644
index 0000000000..bede23369f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for the boards with Parade ps8640 edp bridge
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pp3300_brij_ps8640: pp3300-brij-ps8640-regulator {
+		compatible = "regulator-fixed";
+		status = "okay";
+		regulator-name = "pp3300_brij_ps8640";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_edp_brij_ps8640>;
+
+		vin-supply = <&pp3300_a>;
+	};
+};
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_dx_edp {
+	off-on-delay-us = <500000>;
+
+	/*
+	 * It's nicer to start with this regulator enabled. The
+	 * bootloader may have left it on and it's nice not to cause an
+	 * extra power cycle of the touchscreen and eDP panel at bootup.
+	 * This should help speed bootup because we have off-on-delay-us.
+	 */
+	regulator-boot-on;
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+edp_brij_i2c: &i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ps8640_bridge: bridge@8 {
+		compatible = "parade,ps8640";
+		reg = <0x8>;
+
+		powerdown-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_brij_en>, <&edp_brij_ps8640_rst>;
+
+		vdd12-supply = <&pp1200_brij>;
+		vdd33-supply = <&pp3300_brij_ps8640>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				ps8640_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				ps8640_out: endpoint {
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				/* Compatible will be filled in per-board */
+				power-supply = <&pp3300_dx_edp>;
+				backlight = <&backlight>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&ps8640_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&ps8640_in>;
+};
+
+&tlmm {
+	edp_brij_ps8640_rst: edp-brij-ps8640-rst-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
new file mode 100644
index 0000000000..767cb7450c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,LTE)";
+	compatible = "google,pazquel-sku6", "google,pazquel-sku4", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
new file mode 100644
index 0000000000..9145b74e90
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pazquel (TI,LTE)";
+	compatible = "google,pazquel-sku0", "google,pazquel-sku2", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
new file mode 100644
index 0000000000..9a0e6632a7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade)";
+	compatible = "google,pazquel-sku5", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
new file mode 100644
index 0000000000..47c5970d8c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+	model = "Google Pazquel (TI)";
+	compatible = "google,pazquel-sku1", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
new file mode 100644
index 0000000000..8823edbb4d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include <arm/cros-ec-keyboard.dtsi>
+
+&ap_sar_sensor {
+	compatible = "semtech,sx9324";
+	semtech,ph0-pin = <1 3 3>;
+	semtech,ph1-pin = <3 1 3>;
+	semtech,ph2-pin = <1 3 3>;
+	semtech,ph3-pin = <0 0 0>;
+	semtech,ph01-resolution = <1024>;
+	semtech,ph23-resolution = <1024>;
+	semtech,startup-sensor = <1>;
+	semtech,ph01-proxraw-strength = <3>;
+	semtech,ph23-proxraw-strength = <1>;
+	semtech,avg-pos-strength = <128>;
+	semtech,input-analog-gain = <0>;
+	semtech,cs-idle-sleep = "gnd";
+
+	/delete-property/ svdd-supply;
+	vdd-supply = <&pp1800_prox>;
+};
+
+/delete-node/&trackpad;
+&ap_tp_i2c {
+	status = "okay";
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pp3300_fp_tp>;
+		post-power-on-delay-ms = <100>;
+		hid-descr-addr = <0x0001>;
+
+		wakeup-source;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&panel {
+	compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "TP_INT_ODL",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts
new file mode 100644
index 0000000000..021bcafcf8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel360.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,LTE)";
+	compatible = "google,pazquel-sku22", "google,pazquel-sku20", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts
new file mode 100644
index 0000000000..defd84c535
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel360.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,WIFI-only)";
+	compatible = "google,pazquel-sku21", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
new file mode 100644
index 0000000000..273e2249f0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include "sc7180-trogdor-pazquel.dtsi"
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+	/delete-property/ VBAT-supply;
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3915", "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+		vccio-supply = <&pp1800_l10a>;
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+		MATRIX_KEY(0x03, 0x09, 0)       /* T11 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		MATRIX_KEY(0x03, 0x09, KEY_SLEEP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_PAZQUEL360";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts
new file mode 100644
index 0000000000..0202f03eaf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pompom (rev1) with LTE";
+	compatible = "google,pompom-rev1-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
new file mode 100644
index 0000000000..ba222a60c4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/delete-node/ &keyboard_controller;
+#include <arm/cros-ec-keyboard.dtsi>
+
+/ {
+	model = "Google Pompom (rev1)";
+	compatible = "google,pompom-rev1", "qcom,sc7180";
+};
+
+/*
+ * Pompom rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
+&pm6150_adc {
+	/delete-node/ channel@4f;
+};
+
+&pm6150_adc_tm {
+	/delete-node/ charger-thermistor@0;
+};
+
+&usb_hub_2_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
new file mode 100644
index 0000000000..00e187c08e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r2.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pompom (rev2) with LTE";
+	compatible = "google,pompom-rev2-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
new file mode 100644
index 0000000000..64d6172bf4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/ {
+	model = "Google Pompom (rev2)";
+	compatible = "google,pompom-rev2", "qcom,sc7180";
+};
+
+/*
+ * Pompom rev2 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
+&pm6150_adc {
+	/delete-node/ channel@4f;
+};
+
+&pm6150_adc_tm {
+	/delete-node/ charger-thermistor@0;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
new file mode 100644
index 0000000000..e90b73c353
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r3.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pompom (rev3+) with LTE";
+	compatible = "google,pompom-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
new file mode 100644
index 0000000000..f8aac63a53
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/ {
+	model = "Google Pompom (rev3+)";
+	compatible = "google,pompom", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
new file mode 100644
index 0000000000..fd944842dd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor.dtsi"
+/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+
+/ {
+	thermal-zones {
+		5v-choke-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <250>;
+
+			thermal-sensors = <&pm6150_adc_tm 1>;
+
+			trips {
+				5v-choke-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&alc5682 {
+	realtek,dmic-clk-driving-high;
+};
+
+&ap_tp_i2c {
+	status = "okay";
+};
+
+&cpu6_alert0 {
+	temperature = <60000>;
+};
+
+&cpu6_alert1 {
+	temperature = <65000>;
+};
+
+&cpu6_thermal {
+	sustainable-power = <1124>;
+};
+
+&cpu7_alert0 {
+	temperature = <60000>;
+};
+
+&cpu7_alert1 {
+	temperature = <65000>;
+};
+
+&cpu7_thermal {
+	sustainable-power = <1124>;
+};
+
+&cpu8_alert0 {
+	temperature = <60000>;
+};
+
+&cpu8_alert1 {
+	temperature = <65000>;
+};
+
+&cpu8_thermal {
+	sustainable-power = <1124>;
+};
+
+&cpu9_alert0 {
+	temperature = <60000>;
+};
+
+&cpu9_alert1 {
+	temperature = <65000>;
+};
+
+&cpu9_thermal {
+	sustainable-power = <1124>;
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&panel {
+	compatible = "kingdisplay,kd116n21-30nv-a010";
+};
+
+&pen_insert {
+	/* Insert = high, eject = low */
+	gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+};
+
+&pm6150_adc {
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "5v_choke_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	5v-choke-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&sound {
+	model = "sc7180-rt5682-max98357a-2mic";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dmic_sel>;
+	dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_c1 {
+	status = "disabled";
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_POMPOM";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "TP_INT_ODL",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "",
+			  "EN_PP3300_DX_EDP",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "PEN_PDCT_L",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "EN_PP3300_CODEC",
+			  "EN_PP3300_HUB",
+			  "",
+			  "DMIC_SEL",
+			  "",
+			  "",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_R_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	dmic_sel: dmic-sel-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
new file mode 100644
index 0000000000..35e8945fc5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x600 => 1536
+ *  - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick-r0.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Quackingstick (rev0+) with LTE";
+	compatible = "google,quackingstick-sku1536", "qcom,sc7180";
+};
+
+&ap_sar_sensor {
+	compatible = "semtech,sx9324";
+	semtech,ph0-pin = <3 1 3>;
+	semtech,ph1-pin = <2 1 2>;
+	semtech,ph2-pin = <3 3 1>;
+	semtech,ph3-pin = <1 3 3>;
+	semtech,ph01-resolution = <1024>;
+	semtech,ph23-resolution = <1024>;
+	semtech,startup-sensor = <1>;
+	semtech,ph01-proxraw-strength = <3>;
+	semtech,ph23-proxraw-strength = <3>;
+	semtech,avg-pos-strength = <256>;
+
+	/delete-property/ svdd-supply;
+	vdd-supply = <&pp1800_prox>;
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
new file mode 100644
index 0000000000..0a7f2286b5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x601 => 1537
+ *  - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick.dtsi"
+
+/ {
+	model = "Google Quackingstick (rev0+)";
+	compatible = "google,quackingstick-sku1537", "qcom,sc7180";
+};
+
+&mdss_dsi0_phy {
+	qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+	qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+	qcom,phy-drive-ldo-level = <375>;
+};
+
+&panel {
+	compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
new file mode 100644
index 0000000000..62ab6427dd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/* This board only has 1 USB Type-C port. */
+/delete-node/ &usb_c1;
+
+/ {
+	ppvar_lcd: ppvar-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_lcd";
+
+		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvar_lcd_en>;
+
+		vin-supply = <&pp5000_a>;
+	};
+
+	v1p8_disp: v1p8-disp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v1p8_disp";
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_disp_on>;
+
+		vin-supply = <&pp3300_a>;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+	status = "okay";
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&mdss_dsi0 {
+	panel: panel@0 {
+		/* Compatible will be filled in per-board */
+		reg = <0>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		avdd-supply = <&ppvar_lcd>;
+		pp1800-supply = <&v1p8_disp>;
+		pp3300-supply = <&pp3300_dx_edp>;
+		backlight = <&backlight>;
+		rotation = <270>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&panel_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "",
+			  "",
+			  "AMP_DIN",
+			  "PEN_DET_ODL",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT_L",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "",
+			  "PP1800_DISP_ON",
+			  "LCD_RST",
+			  "PPVAR_LCD_EN",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_I2C_SDA",
+			  "AP_TS_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	lcd_rst: lcd-rst-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ppvar_lcd_en: ppvar-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pp1800_disp_on: pp1800-disp-on-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts
new file mode 100644
index 0000000000..1123c02bd5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Trogdor (rev1+) with LTE";
+	compatible = "google,trogdor-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
new file mode 100644
index 0000000000..671b3691f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+
+/ {
+	model = "Google Trogdor (rev1+)";
+	compatible = "google,trogdor", "qcom,sc7180";
+};
+
+&ap_tp_i2c {
+	status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&panel {
+	compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&trackpad {
+	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&usb_hub_2_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&trackpad_int_1v8_odl {
+	pins = "gpio58";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "FP_TO_AP_IRQ_L",
+			  "FP_RST_L",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "FPMCU_BOOT0",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "PEN_RST_ODL",
+			  "AP_RAM_ID1",
+			  "AP_RAM_ID2",
+			  "PEN_IRQ_L",
+			  "FPMCU_SEL",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "AP_RAM_ID0",
+			  "EN_PP3300_DX_EDP",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "",
+			  "",
+			  "AMP_DIN",
+			  "PEN_PDCT_L",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "TRACKPAD_INT_1V8_ODL",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "DBG_SPI_HOLD_L",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "EN_PP3300_CODEC",
+			  "EN_PP3300_HUB",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "AP_SKU_ID0",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
new file mode 100644
index 0000000000..b0c3be4c3b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_dx_edp {
+	off-on-delay-us = <500000>;
+
+	/*
+	 * It's nicer to start with this regulator enabled. The
+	 * bootloader may have left it on and it's nice not to cause an
+	 * extra power cycle of the touchscreen and eDP panel at bootup.
+	 * This should help speed bootup because we have off-on-delay-us.
+	 */
+	regulator-boot-on;
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+edp_brij_i2c: &i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sn65dsi86_bridge: bridge@2d {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+		vpll-supply = <&pp1800_edp_vpll>;
+		vccio-supply = <&pp1800_brij_vccio>;
+		vcca-supply = <&pp1200_brij>;
+		vcc-supply = <&pp1200_brij>;
+
+		clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
+		clock-names = "refclk";
+
+		no-hpd;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					data-lanes = <0 1>;
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				/* Compatible will be filled in per-board */
+				power-supply = <&pp3300_dx_edp>;
+				backlight = <&backlight>;
+				hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&sn65dsi86_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in>;
+};
+
+&tlmm {
+	edp_brij_irq: edp-brij-irq-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
new file mode 100644
index 0000000000..6225ab8329
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x401 => 1025
+ *  - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev1-boe.dts"
+
+/ {
+	model = "Google Wormdingler rev1+ (BOE, rt5682s)";
+	compatible = "google,wormdingler-sku1025", "qcom,sc7180";
+};
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
new file mode 100644
index 0000000000..6eeead70d3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x400 => 1024
+ *  - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+	model = "Google Wormdingler rev1+ BOE panel board";
+	compatible = "google,wormdingler-sku1024", "qcom,sc7180";
+};
+
+&mdss_dsi0_phy {
+	qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>;
+	qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>;
+	qcom,phy-drive-ldo-level = <450>;
+};
+
+&panel {
+	compatible = "boe,tv110c9m-ll3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
new file mode 100644
index 0000000000..b40b068dad
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0001 => 1
+ *  - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev1-inx.dts"
+
+/ {
+	model = "Google Wormdingler rev1+ (INX, rt5682s)";
+	compatible = "google,wormdingler-sku1", "qcom,sc7180";
+};
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
new file mode 100644
index 0000000000..dd34a2297e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0000 => 0
+ *  - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+	model = "Google Wormdingler rev1+ INX panel board";
+	compatible = "google,wormdingler-sku0", "qcom,sc7180";
+};
+
+&panel {
+	compatible = "innolux,hj110iz-01a";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
new file mode 100644
index 0000000000..2f6a340ddd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+	avdd_lcd: avdd-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_lcd";
+
+		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_lcd_en>;
+
+		vin-supply = <&pp5000_a>;
+	};
+
+	avee_lcd: avee-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avee_lcd";
+
+		gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avee_lcd_en>;
+
+		vin-supply = <&pp5000_a>;
+	};
+
+	pp1800_ts:
+	v1p8_mipi: v1p8-mipi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v1p8_mipi";
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_1800_en>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	thermal-zones {
+		skin_temp_thermal: skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150_adc_tm 1>;
+			sustainable-power = <574>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <62500>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <68000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+	status = "okay";
+};
+
+&cros_ec {
+	base_detection: cbas {
+		compatible = "google,cros-cbas";
+	};
+
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@1 {
+		compatible = "hid-over-i2c";
+		reg = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+		vddl-supply = <&pp1800_ts>;
+	};
+};
+
+&mdss_dsi0 {
+
+	panel: panel@0 {
+		reg = <0>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_reset_1800>;
+		avdd-supply = <&avdd_lcd>;
+		avee-supply = <&avee_lcd>;
+		pp1800-supply = <&v1p8_mipi>;
+		pp3300-supply = <&pp3300_dx_edp>;
+		backlight = <&backlight>;
+		rotation = <270>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&panel_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&pm6150_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	skin-temp-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_WORMDINGLER";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+	gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+	pins = "gpio85";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "",
+			  "",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "AVEE_LCD_EN",
+			  "",
+			  "AMP_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "HP_IRQ",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "BT_UART_CTS",
+			  "BT_UART_RTS",
+			  "BT_UART_TXD",
+			  "BT_UART_RXD",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "WLAN_SW_CTRL",
+			  "",
+			  "REPORT_E",
+			  "",
+			  "ID0",
+			  "",
+			  "ID1",
+			  "",
+			  "",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "TP_EN",
+			  "MIPI_1.8V_EN",
+			  "VDD_RESET_1.8V",
+			  "AVDD_LCD_EN",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "SDM_GRFC_3",
+			  "",
+			  "",
+			  "BOOT_CONFIG_4",
+			  "BOOT_CONFIG_2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "BOOT_CONFIG_3",
+			  "WCI2_LTE_COEX_TXD",
+			  "WCI2_LTE_COEX_RXD",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "FORCED_USB_BOOT_POL",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	avdd_lcd_en: avdd-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	avee_lcd_en: avee-lcd-en-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mipi_1800_en: mipi-1800-en-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	vdd_reset_1800: vdd-reset-1800-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
new file mode 100644
index 0000000000..5a33e16a8b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -0,0 +1,1567 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor device tree source (common between revisions)
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/sc7180-lpass.h>
+
+#include "sc7180.dtsi"
+#include "sc7180-firmware-tfa.dtsi"
+/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/ {
+	thermal-zones {
+		charger_thermal: charger-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150_adc_tm 0>;
+
+			trips {
+				charger-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the board dts.
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &aop_mem;
+/delete-node/ &sec_apps_mem;
+/delete-node/ &tz_mem;
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x94600000 0x0 0x800000>;
+};
+
+/ {
+	reserved-memory {
+		atf_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		mpss_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x2000000>;
+			no-map;
+		};
+
+		venus_mem: memory@8f600000 {
+			reg = <0 0x8f600000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@94100000 {
+			reg = <0x0 0x94100000 0x0 0x200000>;
+			no-map;
+		};
+
+		mba_mem: memory@94400000 {
+			reg = <0x0 0x94400000 0x0 0x200000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		bluetooth0 = &bluetooth;
+		hsuart0 = &uart3;
+		serial0 = &uart8;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* FIXED REGULATORS - parents above children */
+
+	/* This is the top level supply and variable voltage */
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This divides ppvar_sys by 2, so voltage is variable */
+	src_vph_pwr: src-vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vph_pwr";
+
+		/* EC turns on with switchcap_on; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_a: pp5000-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_a";
+
+		/* EC turns on with en_pp5000_a; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_a: pp3300-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_a";
+
+		/* EC turns on with en_pp3300_a; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * Actually should be pp3300 but that's practically an alias for
+		 * pp3300_a so we use pp3300's vin-supply here to avoid one more
+		 * node.
+		 */
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800_ec:
+	pp1800_sensors:
+	pp1800_ldo: pp1800-ldo-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_ldo";
+
+		/* EC turns on with hibernate_l; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/*
+		 * Actually should be pp1800_h1 but we don't have any need to
+		 * model that so we use the parent of pp1800_h1.
+		 */
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp1800_uf_cam: pp1800-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_uf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uf_cam_en>;
+
+		vin-supply = <&pp1800_ldo>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	pp1800_wf_cam: pp1800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_wf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wf_cam_en>;
+
+		vin-supply = <&pp1800_ldo>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	pp2800_uf_cam: pp2800-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_uf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&uf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp2800_vcm_wf_cam:
+	pp2800_wf_cam: pp2800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_wf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_audio:
+	pp3300_codec: pp3300-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_codec";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_codec>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_dx_edp:
+	pp3300_ts: pp3300-dx-edp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_dx_edp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_dx_edp>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_fp_tp: pp3300-fp-tp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_fp_tp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* AP turns on with PP1800_VIO_OUT; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_hub: pp3300-hub-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_hub";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_hub>;
+
+		/* The BIOS leaves this regulator on */
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		/* The panels don't seem to like anything below ~ 5% */
+		brightness-levels = <
+			196 256 324 400 484 576 676 784 900 1024 1156 1296
+			1444 1600 1764 1936 2116 2304 2500 2704 2916 3136
+			3364 3600 3844 4096
+		>;
+		num-interpolated-steps = <64>;
+		default-brightness-level = <951>;
+
+		pwms = <&cros_ec_pwm 1>;
+		enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+		power-supply = <&ppvar_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_edp_bklten>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_pdct_l>;
+
+		pen_insert: switch-pen-insert {
+			label = "Pen Insert";
+
+			/* Insert = low, eject = high */
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	max98360a: audio-codec-0 {
+		compatible = "maxim,max98360a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&amp_en>;
+		sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		keyboard_backlight: led-0 {
+			status = "disabled";
+			label = "cros_ec::kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+
+	sound: sound {
+		compatible = "google,sc7180-trogdor";
+		model = "sc7180-rt5682-max98357a-1mic";
+
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MultiMedia0";
+			reg = <MI2S_PRIMARY>;
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			sound_multimedia0_codec: codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "MultiMedia1";
+			reg = <MI2S_SECONDARY>;
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			sound_multimedia1_codec: codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@5 {
+			link-name = "MultiMedia2";
+			reg = <LPASS_DP_RX>;
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+	};
+};
+
+&qfprom {
+	vcc-supply = <&pp1800_l11a>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+	pinctrl-1 = <&qspi_sleep>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <37500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vddpx_1:
+		vdd2:
+		pp1125_s1a: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vdd_qlink_lv:
+		vdd_qlink_lv_ck:
+		vdd_qusb_hs0_core:
+		vdd_ufs1_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_csi3_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_pll_cc_ebi01:
+		vdda_qrefs_0p9:
+		vdda_usb_ss_dp_core:
+		pp900_l4a: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_cx_wlan:
+		pp800_l9a: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd1:
+		vddpx_3:
+		vddpx_7:
+		vio_in:
+		pp1800_l10a: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdda_apc1_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_bb_clk:
+		pp1800_l11a: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		mcp_vccq:
+		pp1800_l12a_r: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * On trogdor this needs to match l10a since we use it to
+		 * give power to things like SPI flash which communicate back
+		 * on lines powered by l10a.  Thus we force to 1.8V.
+		 */
+		pp1800_l13a: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pp1800_prox:
+		pp1800_l14a: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_alc5682:
+		pp1800_l15a: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vdd_pdphy:
+		pp3100_l17a: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_pen:
+		pp1800_l18a: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		mcp_vcc:
+		pp2850_l19a: ldo19 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		pp1300_s8c: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		pp1800_l1c: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_adc_dac:
+		pp1300_l2c: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1200_brij:
+		vdd_ufs1_1p2:
+		vdda_csi0_1p25:
+		vdda_csi1_1p25:
+		vdda_csi2_1p25:
+		vdda_csi3_1p25:
+		vdda_hv_ebi0:
+		vdda_mipi_dsi0_1p2:
+		vdda_usb_ss_dp_1p2:
+		vddpx_10:
+		pp1200_l3c: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		ppvar_l6c: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l7c: ldo7 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_brij_vccio:
+		pp1800_edp_vpll:
+		pp1800_l8c: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2950_l9c: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l10c: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l11c: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+ap_ec_spi: &spi6 {
+	status = "okay";
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+ap_h1_spi: &spi0 {
+	status = "okay";
+	cr50: tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <42 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&camcc {
+	status = "disabled";
+};
+
+ap_sar_sensor_i2c: &i2c5 {
+	clock-frequency = <400000>;
+
+	ap_sar_sensor: proximity@28 {
+		compatible = "semtech,sx9310";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&p_sensor_int_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&pp3300_a>;
+		svdd-supply = <&pp1800_prox>;
+
+		label = "proximity-wifi";
+	};
+};
+
+ap_tp_i2c: &i2c7 {
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_fp_tp>;
+
+		wakeup-source;
+	};
+};
+
+hp_i2c: &i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682i";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		/*
+		 * This will get ignored because the interrupt type
+		 * is set in rt5682.c.
+		 */
+		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+		VBAT-supply = <&pp3300_audio>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <1>;
+		realtek,jd-src = <1>;
+	};
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&lpass_cpu {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sec_mi2s_active>, <&pri_mi2s_active>, <&pri_mi2s_mclk_active>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	secondary_mi2s: dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+};
+
+&lpass_hm {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hot_plug_det>;
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&pm6150_adc {
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "charger_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	charger-thermistor@0 {
+		reg = <0>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6150_pon {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	compatible = "qcom,sc7180-mss-pil";
+	reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
+
+	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+		 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+		 <&gcc GCC_MSS_NAV_AXI_CLK>,
+		 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+		 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo";
+
+	iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+	memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
+
+	/* This gets overridden for SKUs with LTE support. */
+	firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn",
+			"qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn";
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+		 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+	reset-names = "mss_restart", "pdc_reset";
+
+	qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+	qcom,spare-regs = <&tcsr_regs_2 0xb3e4>;
+};
+
+&scm {
+	/* TF-A firmware maps memory cached so mark dma-coherent to match. */
+	dma-coherent;
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	vmmc-supply = <&mcp_vcc>;
+	vqmmc-supply = <&mcp_vccq>;
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply = <&pp2950_l9c>;
+	vqmmc-supply = <&ppvar_l6c>;
+
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+};
+
+&spi0 {
+	pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs_gpio>;
+	cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+};
+
+&spi6 {
+	pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs_gpio>;
+	cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+};
+
+ap_spi_fp: &spi10 {
+	pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs_gpio>;
+	cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+	cros_ec_fp: ec@0 {
+		compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		boot0-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <3000000>;
+		vdd-supply = <&pp3300_fp_tp>;
+	};
+};
+
+#include <arm/cros-ec-sbs.dtsi>
+
+&uart3 {
+	status = "okay";
+
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart3_sleep>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3991-bt";
+		vddio-supply = <&pp1800_l10a>;
+		vddxo-supply = <&pp1800_l1c>;
+		vddrf-supply = <&pp1300_l2c>;
+		vddch0-supply = <&pp3300_l10c>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&pp3300_hub>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&pp3300_hub>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdd-supply = <&vdd_qusb_hs0_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+	qcom,imp-res-offset-value = <8>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,bias-ctrl-value = <0x22>;
+	qcom,charge-ctrl-value = <3>;
+	qcom,hsdisc-trim-value = <0>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vdda_usb_ss_dp_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core>;
+};
+
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x0c42 0x0>;
+	};
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vdd_cx_wlan>;
+	vdd-1.8-xo-supply = <&pp1800_l1c>;
+	vdd-1.3-rfa-supply = <&pp1300_l2c>;
+	vdd-3.3-ch0-supply = <&pp3300_l10c>;
+	vdd-3.3-ch1-supply = <&pp3300_l11c>;
+
+	wifi-firmware {
+		iommus = <&apps_smmu 0xc2 0x1>;
+	};
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&dp_hot_plug_det {
+	bias-disable;
+};
+
+&pri_mi2s_active {
+	drive-strength = <2>;
+	bias-pull-down;
+};
+
+&pri_mi2s_mclk_active {
+	drive-strength = <2>;
+	bias-pull-down;
+};
+
+&qspi_cs0 {
+	bias-disable;		/* External pullup */
+};
+
+&qspi_clk {
+	drive-strength = <8>;
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data0 {
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data1 {
+	bias-pull-down;
+};
+
+&qup_i2c2_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c4_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c5_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c7_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c9_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_spi0_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi0_cs_gpio {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_cs_gpio {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_cs_gpio {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
+
+&qup_uart3_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&qup_uart8_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart8_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&sec_mi2s_active {
+	drive-strength = <2>;
+	bias-pull-down;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&pm6150_gpios {
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&pm6150l_gpios {
+	gpio-line-names = "AP_SUSPEND",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "";
+};
+
+&tlmm {
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>;
+
+	amp_en: amp-en-state {
+		pins = "gpio23";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	ap_ec_int_l: ap-ec-int-l-state {
+		pins = "gpio94";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ap_edp_bklten: ap-edp-bklten-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+
+		/* Force backlight to be disabled to match state at boot. */
+		output-low;
+	};
+
+	ap_suspend_l_neuter: ap-suspend-l-neuter-state {
+		pins = "gpio27";
+		function = "gpio";
+		bias-disable;
+	};
+
+	bios_flash_wp_l: bios-flash-wp-l-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+	};
+
+	edp_brij_en: edp-brij-en-state {
+		pins = "gpio104";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_codec: en-pp3300-codec-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
+		pins = "gpio30";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_hub: en-pp3300-hub-state {
+		pins = "gpio84";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fp_rst_l: fp-rst-l-state {
+		pins = "gpio22";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
+		pins = "gpio4";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	fpmcu_boot0: fpmcu-boot0-state {
+		pins = "gpio10";
+		function = "gpio";
+		bias-disable;
+	};
+
+	h1_ap_int_odl: h1-ap-int-odl-state {
+		pins = "gpio42";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	hp_irq: hp-irq-state {
+		pins = "gpio28";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	pen_irq_l: pen-irq-l-state {
+		pins = "gpio21";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	pen_pdct_l: pen-pdct-l-state-state {
+		pins = "gpio52";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	pen_rst_odl: pen-rst-odl-state {
+		pins = "gpio18";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+
+		/*
+		 * The pen driver doesn't currently support
+		 * driving this reset line.  By specifying
+		 * output-high here we're relying on the fact
+		 * that this pin has a default pulldown at boot
+		 * (which makes sure the pen was in reset if it
+		 * was powered) and then we set it high here to
+		 * take it out of reset.  Better would be if the
+		 * pen driver could control this and we could
+		 * remove "output-high" here.
+		 */
+		output-high; /* TODO: Remove this? */
+	};
+
+	p_sensor_int_l: p-sensor-int-l-state {
+		pins = "gpio24";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio63", "gpio64", "gpio65", "gpio68";
+
+		/*
+		 * When we're not actively transferring we want pins as GPIOs
+		 * with output disabled so that the quad SPI IP block stops
+		 * driving them. We rely on the normal pulls configured in
+		 * the active state and don't redefine them here. Also note
+		 * that we don't need the reverse (output-enable) in the
+		 * normal mode since the "output-enable" only matters for
+		 * GPIO function.
+		 */
+		function = "gpio";
+		output-disable;
+	};
+
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
+			/*
+			 * Configure a pull-down on CTS to match the pull of
+			 * the Bluetooth module.
+			 */
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		rts-pins {
+			/*
+			 * Configure pull-down on RTS. As RTS is active low
+			 * signal, pull it low to indicate the BT SoC that it
+			 * can wakeup the system anytime from suspend state by
+			 * pulling RX low (by sending wakeup bytes).
+			 */
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		tx-pins {
+			/*
+			 * Configure pull-up on TX when it isn't actively driven
+			 * to prevent BT SoC from receiving garbage during sleep.
+			 */
+			pins = "gpio40";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		rx-pins {
+			/*
+			 * Configure a pull-up on RX. This is needed to avoid
+			 * garbage data when the TX pin of the Bluetooth module
+			 * is floating which may cause spurious wakeups.
+			 */
+			pins = "gpio41";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	/* Named trackpad_int_1v8_odl on earlier revision schematics */
+	trackpad_int_1v8_odl:
+	tp_int_odl: tp-int-odl-state {
+		pins = "gpio0";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	ts_int_l: ts-int-l-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_reset_l: ts-reset-l-state {
+		pins = "gpio8";
+		function = "gpio";
+		bias-disable;
+
+		/*
+		 * The reset GPIO to the touchscreen takes almost 2ms to drop
+		 * at the default drive strength. When we bump it up to 8mA it
+		 * falls in under 500us. We want this to be fast since the Elan
+		 * datasheet (and any drivers written based on it) talk about using
+		 * a 500 us reset pulse.
+		 */
+		drive-strength = <8>;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	uf_cam_en: uf-cam-en-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+
+		/* External pull down */
+		bias-disable;
+	};
+
+	wf_cam_en: wf-cam-en-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+
+		/* External pull down */
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
new file mode 100644
index 0000000000..f7c528ecb2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -0,0 +1,4639 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 SoC device tree source
+ *
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+#include <dt-bindings/clock/qcom,gcc-sc7180.h>
+#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
+#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,videocc-sc7180.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sc7180.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc1 = &sdhc_1;
+		mmc2 = &sdhc_2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi3 = &spi3;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi8 = &spi8;
+		spi10 = &spi10;
+		spi11 = &spi11;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <38400000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_200>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_300>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_400>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_500>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <480>;
+			next-level-cache = <&L2_600>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <480>;
+			next-level-cache = <&L2_700>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle_states: idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+		};
+
+		domain_idle_states: domain-idle-states {
+			CLUSTER_SLEEP_PC: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-l3-power-collapse";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-cx-retention";
+				arm,psci-suspend-param = <0x41001244>;
+				entry-latency-us = <3638>;
+				exit-latency-us = <4562>;
+				min-residency-us = <8467>;
+			};
+
+			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-power-down";
+				arm,psci-suspend-param = <0x4100b244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9826>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sc7180", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp2: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp3: opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp4: opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <1804000 8908800>;
+		};
+
+		cpu0_opp5: opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <2188000 12902400>;
+		};
+
+		cpu0_opp6: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 12902400>;
+		};
+
+		cpu0_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp8: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp9: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp10: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 22425600>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu6_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp2: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp3: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp4: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp5: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp6: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp7: opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp8: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu6_opp9: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu6_opp10: opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp11: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp12: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp13: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu6_opp14: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu6_opp15: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 23347200>;
+		};
+
+		cpu6_opp16: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <8532000 23347200>;
+		};
+	};
+
+	qspi_opp_table: opp-table-qspi {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD1: cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD2: cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD3: cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD4: cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD5: cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD6: cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CPU_PD7: cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CLUSTER_PD: cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_PC
+					      &CLUSTER_SLEEP_CX_RET
+					      &CLUSTER_AOSS_SLEEP>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@80600000 {
+			reg = <0x0 0x80600000 0x0 0x200000>;
+			no-map;
+		};
+
+		aop_mem: memory@80800000 {
+			reg = <0x0 0x80800000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: memory@80820000 {
+			reg = <0x0 0x80820000 0x0 0x20000>;
+			compatible = "qcom,cmd-db";
+			no-map;
+		};
+
+		sec_apps_mem: memory@808ff000 {
+			reg = <0x0 0x808ff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x3900000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8b700000 {
+			reg = <0 0x8b700000 0 0x10000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@94600000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x94600000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc7180";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SC7180_CX>;
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,sc7180-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x7a0>,
+			      <0 0x00780000 0 0x7a0>,
+			      <0 0x00782000 0 0x100>,
+			      <0 0x00786000 0 0x1fff>;
+
+			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+			clock-names = "core";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx-trim-primary@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 3>;
+			};
+
+			gpu_speed_bin: gpu_speed_bin@1d2 {
+				reg = <0x1d2 0x2>;
+				bits = <5 8>;
+			};
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x007c4000 0 0x1000>,
+				<0 0x007c5000 0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			iommus = <&apps_smmu 0x60 0x0>;
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 600000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <390000 0>;
+				};
+			};
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x43 0x0>;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_spi>, <&qup_spi1_cs>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_spi>, <&qup_spi3_cs>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart3: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			uart4: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_spi>, <&qup_spi5_cs>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart5: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x4c3 0x0>;
+			status = "disabled";
+
+			i2c6: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi6: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart6: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c7: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			uart7: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c8: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi8: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_spi>, <&qup_spi8_cs>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart8: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			uart9: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi10: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart10: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi11: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_spi>, <&qup_spi11_cs>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart11: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sc7180-config-noc";
+			reg = <0 0x01500000 0 0x28000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sc7180-system-noc";
+			reg = <0 0x01620000 0 0x17080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1638000 {
+			compatible = "qcom,sc7180-mc-virt";
+			reg = <0 0x01638000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qup_virt: interconnect@1650000 {
+			compatible = "qcom,sc7180-qup-virt";
+			reg = <0 0x01650000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc7180-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1705000 {
+			compatible = "qcom,sc7180-aggre2-noc";
+			reg = <0 0x01705000 0 0x9000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@170e000 {
+			compatible = "qcom,sc7180-compute-noc";
+			reg = <0 0x0170e000 0 0x6000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sc7180-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sc7180-ipa";
+
+			iommus = <&apps_smmu 0x440 0x0>,
+				 <&apps_smmu 0x442 0x0>;
+			reg = <0 0x01e40000 0 0x7000>,
+			      <0 0x01e47000 0 0x2000>,
+			      <0 0x01e04000 0 0x2c000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "imem",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,sc7180-tcsr", "syscon";
+			reg = <0 0x01f60000 0 0x20000>;
+		};
+
+		tcsr_regs_2: syscon@1fc0000 {
+			compatible = "qcom,sc7180-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0x40000>;
+		};
+
+		tlmm: pinctrl@3500000 {
+			compatible = "qcom,sc7180-pinctrl";
+			reg = <0 0x03500000 0 0x300000>,
+			      <0 0x03900000 0 0x300000>,
+			      <0 0x03d00000 0 0x300000>;
+			reg-names = "west", "north", "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 120>;
+			wakeup-parent = <&pdc>;
+
+			dp_hot_plug_det: dp-hot-plug-det-state {
+				pins = "gpio117";
+				function = "dp_hot";
+			};
+
+			qspi_clk: qspi-clk-state {
+				pins = "gpio63";
+				function = "qspi_clk";
+			};
+
+			qspi_cs0: qspi-cs0-state {
+				pins = "gpio68";
+				function = "qspi_cs";
+			};
+
+			qspi_cs1: qspi-cs1-state {
+				pins = "gpio72";
+				function = "qspi_cs";
+			};
+
+			qspi_data0: qspi-data0-state {
+				pins = "gpio64";
+				function = "qspi_data";
+			};
+
+			qspi_data1: qspi-data1-state {
+				pins = "gpio65";
+				function = "qspi_data";
+			};
+
+			qspi_data23: qspi-data23-state {
+				pins = "gpio66", "gpio67";
+				function = "qspi_data";
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio34", "gpio35";
+				function = "qup00";
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup01";
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio15", "gpio16";
+				function = "qup02_i2c";
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio38", "gpio39";
+				function = "qup03";
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio115", "gpio116";
+				function = "qup04_i2c";
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio25", "gpio26";
+				function = "qup05";
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio59", "gpio60";
+				function = "qup10";
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup11_i2c";
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio42", "gpio43";
+				function = "qup12";
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio46", "gpio47";
+				function = "qup13_i2c";
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio86", "gpio87";
+				function = "qup14";
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio53", "gpio54";
+				function = "qup15";
+			};
+
+			qup_spi0_spi: qup-spi0-spi-state {
+				pins = "gpio34", "gpio35", "gpio36";
+				function = "qup00";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio37";
+				function = "qup00";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio37";
+				function = "gpio";
+			};
+
+			qup_spi1_spi: qup-spi1-spi-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup01";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio3";
+				function = "qup01";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi3_spi: qup-spi3-spi-state {
+				pins = "gpio38", "gpio39", "gpio40";
+				function = "qup03";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio41";
+				function = "qup03";
+			};
+
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio41";
+				function = "gpio";
+			};
+
+			qup_spi5_spi: qup-spi5-spi-state {
+				pins = "gpio25", "gpio26", "gpio27";
+				function = "qup05";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio28";
+				function = "qup05";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio28";
+				function = "gpio";
+			};
+
+			qup_spi6_spi: qup-spi6-spi-state {
+				pins = "gpio59", "gpio60", "gpio61";
+				function = "qup10";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio62";
+				function = "qup10";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio62";
+				function = "gpio";
+			};
+
+			qup_spi8_spi: qup-spi8-spi-state {
+				pins = "gpio42", "gpio43", "gpio44";
+				function = "qup12";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio45";
+				function = "qup12";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio45";
+				function = "gpio";
+			};
+
+			qup_spi10_spi: qup-spi10-spi-state {
+				pins = "gpio86", "gpio87", "gpio88";
+				function = "qup14";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio89";
+				function = "qup14";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio89";
+				function = "gpio";
+			};
+
+			qup_spi11_spi: qup-spi11-spi-state {
+				pins = "gpio53", "gpio54", "gpio55";
+				function = "qup15";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio56";
+				function = "qup15";
+			};
+
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+				pins = "gpio56";
+				function = "gpio";
+			};
+
+			qup_uart0_default: qup-uart0-default-state {
+				qup_uart0_cts: cts-pins {
+					pins = "gpio34";
+					function = "qup00";
+				};
+
+				qup_uart0_rts: rts-pins {
+					pins = "gpio35";
+					function = "qup00";
+				};
+
+				qup_uart0_tx: tx-pins {
+					pins = "gpio36";
+					function = "qup00";
+				};
+
+				qup_uart0_rx: rx-pins {
+					pins = "gpio37";
+					function = "qup00";
+				};
+			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				qup_uart1_cts: cts-pins {
+					pins = "gpio0";
+					function = "qup01";
+				};
+
+				qup_uart1_rts: rts-pins {
+					pins = "gpio1";
+					function = "qup01";
+				};
+
+				qup_uart1_tx: tx-pins {
+					pins = "gpio2";
+					function = "qup01";
+				};
+
+				qup_uart1_rx: rx-pins {
+					pins = "gpio3";
+					function = "qup01";
+				};
+			};
+
+			qup_uart2_default: qup-uart2-default-state {
+				qup_uart2_tx: tx-pins {
+					pins = "gpio15";
+					function = "qup02_uart";
+				};
+
+				qup_uart2_rx: rx-pins {
+					pins = "gpio16";
+					function = "qup02_uart";
+				};
+			};
+
+			qup_uart3_default: qup-uart3-default-state {
+				qup_uart3_cts: cts-pins {
+					pins = "gpio38";
+					function = "qup03";
+				};
+
+				qup_uart3_rts: rts-pins {
+					pins = "gpio39";
+					function = "qup03";
+				};
+
+				qup_uart3_tx: tx-pins {
+					pins = "gpio40";
+					function = "qup03";
+				};
+
+				qup_uart3_rx: rx-pins {
+					pins = "gpio41";
+					function = "qup03";
+				};
+			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				qup_uart4_tx: tx-pins {
+					pins = "gpio115";
+					function = "qup04_uart";
+				};
+
+				qup_uart4_rx: rx-pins {
+					pins = "gpio116";
+					function = "qup04_uart";
+				};
+			};
+
+			qup_uart5_default: qup-uart5-default-state {
+				qup_uart5_cts: cts-pins {
+					pins = "gpio25";
+					function = "qup05";
+				};
+
+				qup_uart5_rts: rts-pins {
+					pins = "gpio26";
+					function = "qup05";
+				};
+
+				qup_uart5_tx: tx-pins {
+					pins = "gpio27";
+					function = "qup05";
+				};
+
+				qup_uart5_rx: rx-pins {
+					pins = "gpio28";
+					function = "qup05";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				qup_uart6_cts: cts-pins {
+					pins = "gpio59";
+					function = "qup10";
+				};
+
+				qup_uart6_rts: rts-pins {
+					pins = "gpio60";
+					function = "qup10";
+				};
+
+				qup_uart6_tx: tx-pins {
+					pins = "gpio61";
+					function = "qup10";
+				};
+
+				qup_uart6_rx: rx-pins {
+					pins = "gpio62";
+					function = "qup10";
+				};
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				qup_uart7_tx: tx-pins {
+					pins = "gpio6";
+					function = "qup11_uart";
+				};
+
+				qup_uart7_rx: rx-pins {
+					pins = "gpio7";
+					function = "qup11_uart";
+				};
+			};
+
+			qup_uart8_default: qup-uart8-default-state {
+				qup_uart8_tx: tx-pins {
+					pins = "gpio44";
+					function = "qup12";
+				};
+
+				qup_uart8_rx: rx-pins {
+					pins = "gpio45";
+					function = "qup12";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default-state {
+				qup_uart9_tx: tx-pins {
+					pins = "gpio46";
+					function = "qup13_uart";
+				};
+
+				qup_uart9_rx: rx-pins {
+					pins = "gpio47";
+					function = "qup13_uart";
+				};
+			};
+
+			qup_uart10_default: qup-uart10-default-state {
+				qup_uart10_cts: cts-pins {
+					pins = "gpio86";
+					function = "qup14";
+				};
+
+				qup_uart10_rts: rts-pins {
+					pins = "gpio87";
+					function = "qup14";
+				};
+
+				qup_uart10_tx: tx-pins {
+					pins = "gpio88";
+					function = "qup14";
+				};
+
+				qup_uart10_rx: rx-pins {
+					pins = "gpio89";
+					function = "qup14";
+				};
+			};
+
+			qup_uart11_default: qup-uart11-default-state {
+				qup_uart11_cts: cts-pins {
+					pins = "gpio53";
+					function = "qup15";
+				};
+
+				qup_uart11_rts: rts-pins {
+					pins = "gpio54";
+					function = "qup15";
+				};
+
+				qup_uart11_tx: tx-pins {
+					pins = "gpio55";
+					function = "qup15";
+				};
+
+				qup_uart11_rx: rx-pins {
+					pins = "gpio56";
+					function = "qup15";
+				};
+			};
+
+			sec_mi2s_active: sec-mi2s-active-state {
+				pins = "gpio49", "gpio50", "gpio51";
+				function = "mi2s_1";
+			};
+
+			pri_mi2s_active: pri-mi2s-active-state {
+				pins = "gpio53", "gpio54", "gpio55", "gpio56";
+				function = "mi2s_0";
+			};
+
+			pri_mi2s_mclk_active: pri-mi2s-mclk-active-state {
+				pins = "gpio57";
+				function = "lpass_ext";
+			};
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sc7180-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7180_CX>,
+					<&rpmhpd SC7180_MX>,
+					<&rpmhpd SC7180_MSS>;
+			power-domain-names = "cx", "mx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		gpu: gpu@5000000 {
+			compatible = "qcom,adreno-618.0", "qcom,adreno";
+			reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
+				<0 0x05061000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+
+			#cooling-cells = <2>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-825000000 {
+					opp-hz = /bits/ 64 <825000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x04>;
+				};
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-565000000 {
+					opp-hz = /bits/ 64 <565000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <5412000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-430000000 {
+					opp-hz = /bits/ 64 <430000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5412000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-355000000 {
+					opp-hz = /bits/ 64 <355000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <3072000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-267000000 {
+					opp-hz = /bits/ 64 <267000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <3072000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-180000000 {
+					opp-hz = /bits/ 64 <180000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1804000>;
+					opp-supported-hw = <0x07>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0 0x05040000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				<&gcc GCC_GPU_CFG_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&gpucc CX_GDSC>;
+		};
+
+		gmu: gmu@506a000 {
+			compatible = "qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
+			reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>,
+				<0 0x0b490000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+			       <&gpucc GPU_CC_CXO_CLK>,
+			       <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+			       <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+			power-domains = <&gpucc CX_GDSC>, <&gpucc GX_GDSC>;
+			power-domain-names = "cx", "gx";
+			iommus = <&adreno_smmu 5>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,sc7180-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dma@10a2000 {
+			compatible = "qcom,sc7180-dcc", "qcom,dcc";
+			reg = <0x0 0x010a2000 0x0 0x1000>,
+			      <0x0 0x010ae000 0x0 0x2000>;
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint = <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&swao_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&swao_replicator_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x04a0 0x20>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06b04000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					swao_funnel_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@6b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b05000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&swao_replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&swao_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b06000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
+
+			out-ports {
+				port {
+					swao_replicator_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint = <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint = <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			iommus = <&apps_smmu 0x80 0>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+
+			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 600000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <200000 0>;
+				};
+			};
+		};
+
+		qspi: spi@88dc000 {
+			compatible = "qcom,sc7180-qspi", "qcom,qspi-v1";
+			reg = <0 0x088dc000 0 0x600>;
+			iommus = <&apps_smmu 0x20 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0
+					&config_noc SLAVE_QSPI_0 0>;
+			interconnect-names = "qspi-config";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sc7180-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2p_hstx_trim>;
+		};
+
+		usb_1_qmpphy: phy-wrapper@88e9000 {
+			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x3c>,
+			      <0 0x088ea000 0 0x18c>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x128>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x128>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x18>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		pmu@90b6300 {
+			compatible = "qcom,sc7180-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x090b6300 0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2288000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <14236000>;
+				};
+			};
+		};
+
+		pmu@90cd000 {
+			compatible = "qcom,sc7180-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x090cd000 0 0x1000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <1144000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <3879000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <6881000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <8137000>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sc7180-dc-noc";
+			reg = <0 0x09160000 0 0x03200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc7180-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sc7180-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sc7180-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xe000>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x540 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				maximum-speed = "super-speed";
+			};
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sc7180-venus";
+			reg = <0 0x0aa00000 0 0xff000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>,
+					<&rpmhpd SC7180_CX>;
+			power-domain-names = "venus", "vcodec0", "cx";
+			operating-points-v2 = <&venus_opp_table>;
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+			clock-names = "core", "iface", "bus",
+				      "vcodec0_core", "vcodec0_bus";
+			iommus = <&apps_smmu 0x0c00 0x60>;
+			memory-region = <&venus_mem>;
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
+			interconnect-names = "video-mem", "cpu-cfg";
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-340000000 {
+					opp-hz = /bits/ 64 <340000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-434000000 {
+					opp-hz = /bits/ 64 <434000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-500000097 {
+					opp-hz = /bits/ 64 <500000097>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sc7180-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camnoc_virt: interconnect@ac00000 {
+			compatible = "qcom,sc7180-camnoc-virt";
+			reg = <0 0x0ac00000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc7180-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+			       <&gcc GCC_CAMERA_AHB_CLK>,
+			       <&gcc GCC_CAMERA_XO_CLK>;
+			clock-names = "bi_tcxo", "iface", "xo";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sc7180-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "ahb", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem";
+
+			iommus = <&apps_smmu 0x800 0x2>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@ae01000 {
+				compatible = "qcom,sc7180-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus", "iface", "rot", "lut", "core",
+					      "vsync";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+						  <&dispcc DISP_CC_MDSS_ROT_CLK>,
+						  <&dispcc DISP_CC_MDSS_AHB_CLK>;
+				assigned-clock-rates = <19200000>,
+						       <19200000>,
+						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sc7180-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sc7180-dp";
+				status = "disabled";
+
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0xc00>,
+				      <0 0x0ae91000 0 0x400>,
+				      <0 0x0ae91400 0 0x400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface", "core_aux", "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
+				#sound-dai-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sc7180-dispcc";
+			reg = <0 0x0af00000 0 0x200000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&dp_phy 0>,
+				 <&dp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc7180-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		pdc_reset: reset-controller@b2e0000 {
+			compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
+			reg = <0 0x0b2e0000 0 0x20000>;
+			#reset-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+				<0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+				<0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_reset: reset-controller@c2a0000 {
+			compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
+			reg = <0 0x0c2a0000 0 0x31000>;
+			#reset-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		sram@146aa000 {
+			compatible = "qcom,sc7180-imem", "syscon", "simple-mfd";
+			reg = <0 0x146aa000 0 0x2000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x146aa000 0x2000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0 0x17a40000 0 0x20000>;
+				status = "disabled";
+			};
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,sc7180-apss-shared",
+				     "qcom,sdm845-apss-shared";
+			reg = <0 0x17c00000 0 0x10000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17c20000 0 0x1000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x18200000 0 0x10000>,
+			      <0 0x18210000 0 0x10000>,
+			      <0 0x18220000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc7180-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc7180-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp6 {
+						opp-level = <224>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sc7180-osm-l3", "qcom,osm-l3";
+			reg = <0 0x18321000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,sc7180-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_mem>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		lpasscc: clock-controller@62d00000 {
+			compatible = "qcom,sc7180-lpasscorecc";
+			reg = <0 0x62d00000 0 0x50000>,
+			      <0 0x62780000 0 0x30000>;
+			reg-names = "lpass_core_cc", "lpass_audio_cc";
+			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "reserved"; /* Controlled by ADSP */
+		};
+
+		lpass_cpu: lpass@62d87000 {
+			compatible = "qcom,sc7180-lpass-cpu";
+
+			reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>;
+			reg-names = "lpass-hdmiif", "lpass-lpaif";
+
+			iommus = <&apps_smmu 0x1020 0>,
+				<&apps_smmu 0x1021 0>,
+				<&apps_smmu 0x1032 0>;
+
+			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			status = "disabled";
+
+			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
+
+			clock-names = "pcnoc-sway-clk", "audio-core",
+					"mclk0", "pcnoc-mport-clk",
+					"mi2s-bit-clk0", "mi2s-bit-clk1";
+
+
+			#sound-dai-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif", "lpass-irq-hdmi";
+		};
+
+		lpass_hm: clock-controller@63000000 {
+			compatible = "qcom,sc7180-lpasshm";
+			reg = <0 0x63000000 0 0x28>;
+			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&rpmhpd SC7180_CX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "reserved"; /* Controlled by ADSP */
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2_thermal: cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3_thermal: cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4_thermal: cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5_thermal: cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6_thermal: cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+			sustainable-power = <1425>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7_thermal: cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+			sustainable-power = <1425>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu8_thermal: cpu8-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+			sustainable-power = <1425>;
+
+			trips {
+				cpu8_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu8_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu8_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu9_thermal: cpu9-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 12>;
+			sustainable-power = <1425>;
+
+			trips {
+				cpu9_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu9_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu9_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0_crit: aoss0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss0_crit: cluster0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss1_crit: cluster0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_crit: gpuss0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_crit: gpuss1-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss1_crit: aoss1-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cwlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cwlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cwlan_crit: cwlan-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				audio_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				audio_crit: audio-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				ddr_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				ddr_crit: ddr-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				q6_hvx_crit: q6-hvx-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera_crit: camera-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				mdm_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdm_crit: mdm-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mdm_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdm_dsp_crit: mdm-dsp-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				npu_crit: npu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
new file mode 100644
index 0000000000..5d462ae14b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 fragment for devices with Chrome bootloader
+ *
+ * This file mainly tries to abstract out the memory protections put into
+ * place by the Chrome bootloader which are different than what's put into
+ * place by Qualcomm's typical bootloader. It also has a smattering of other
+ * things that will hold true for any conceivable Chrome design
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the setup for Chrome boards.
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &reserved_xbl_uefi_log;
+/delete-node/ &sec_apps_mem;
+
+/ {
+	reserved-memory {
+		adsp_mem: memory@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		camera_mem: memory@8ad00000 {
+			reg = <0x0 0x8ad00000 0x0 0x500000>;
+			no-map;
+		};
+
+		venus_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: memory@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+	};
+};
+
+&lpass_aon {
+	status = "okay";
+};
+
+&lpass_core {
+	status = "okay";
+};
+
+&lpass_hm {
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&pdc_reset {
+	status = "okay";
+};
+
+/* The PMIC PON code isn't compatible w/ how Chrome EC/BIOS handle things. */
+&pmk8350_pon {
+	status = "disabled";
+};
+
+/*
+ * Chrome designs always boot from SPI flash hooked up to the qspi.
+ *
+ * It's expected that all boards will support "dual SPI" at 37.5 MHz.
+ * If some boards need a different speed or have a package that allows
+ * Quad SPI together with WP then those boards can easily override.
+ */
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+	pinctrl-1 = <&qspi_sleep>;
+
+	spi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <37500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&remoteproc_wpss {
+	status = "okay";
+	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+};
+
+&scm {
+	/* TF-A firmware maps memory cached so mark dma-coherent to match. */
+	dma-coherent;
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+
+	wifi-firmware {
+		iommus = <&apps_smmu 0x1c02 0x1>;
+	};
+};
+
+/* PINCTRL - chrome-common pinctrl */
+
+&tlmm {
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+
+		/*
+		 * When we're not actively transferring we want pins as GPIOs
+		 * with output disabled so that the quad SPI IP block stops
+		 * driving them. We rely on the normal pulls configured in
+		 * the active state and don't redefine them here. Also note
+		 * that we don't need the reverse (output-enable) in the
+		 * normal mode since the "output-enable" only matters for
+		 * GPIO function.
+		 */
+		function = "gpio";
+		output-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
new file mode 100644
index 0000000000..afae7f46b0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 CRD board device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sc7280-idp.dtsi"
+#include "sc7280-idp-ec-h1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)";
+	compatible = "qcom,sc7280-crd",
+		     "google,hoglin-rev3", "google,hoglin-rev4",
+		     "google,piglin-rev3", "google,piglin-rev4",
+		     "qcom,sc7280";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-2 {
+		compatible = "qcom,pmg1110-rpmh-regulators";
+		qcom,pmic-id = "k";
+
+		vreg_s1k_1p0: smps1 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+	};
+};
+
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&vreg_l18b_1p8>;
+
+		wakeup-source;
+	};
+};
+
+ap_ts_pen_1v8: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <500>;
+		hid-descr-addr = <0x0000>;
+
+		vdd-supply = <&vreg_l19b_1p8>;
+	};
+};
+
+&nvme_3v3_regulator {
+	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+};
+
+&nvme_pwren {
+	pins = "gpio51";
+};
+
+&sound {
+	audio-routing =
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"VA DMIC3", "MIC BIAS3",
+		"TX SWR_ADC0", "ADC1_OUTPUT",
+		"TX SWR_ADC1", "ADC2_OUTPUT",
+		"TX SWR_ADC2", "ADC3_OUTPUT",
+		"TX SWR_DMIC0", "DMIC1_OUTPUT",
+		"TX SWR_DMIC1", "DMIC2_OUTPUT",
+		"TX SWR_DMIC2", "DMIC3_OUTPUT",
+		"TX SWR_DMIC3", "DMIC4_OUTPUT",
+		"TX SWR_DMIC4", "DMIC5_OUTPUT",
+		"TX SWR_DMIC5", "DMIC6_OUTPUT",
+		"TX SWR_DMIC6", "DMIC7_OUTPUT",
+		"TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
+
+&wcd9385 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
+	pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
+	us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+	tp_int_odl: tp-int-odl-state {
+		pins = "gpio7";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts_int_l: ts-int-l-state {
+		pins = "gpio55";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_reset_l: ts-reset-l-state {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+	};
+
+	us_euro_hs_sel: us-euro-hs-sel-state {
+		pins = "gpio81";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
new file mode 100644
index 0000000000..a90c70b1b7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards
+ * using rt5682 codec and having 3 dmics connected to sc7280.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-rt5682-max98360a-3mic";
+
+		audio-routing = "VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb",
+
+				"Headphone Jack", "HPOL",
+				"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "ALC5682";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <4>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
+};
+
+hp_i2c: &i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,jd-src = <1>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+	};
+};
+
+&lpass_cpu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>,
+			<&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+
+	dai-link@25 {
+		reg = <LPASS_CDC_DMA_VA_TX0>;
+	};
+};
+
+&lpass_va_macro {
+	vdd-micb-supply = <&pp1800_l2c>;
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>, <&lpass_dmic23_clk>,
+			<&lpass_dmic23_data>;
+
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&lpass_dmic01_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic01_data {
+	bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic23_data {
+	bias-pull-down;
+};
+
+&mi2s0_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_data1 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_mclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
new file mode 100644
index 0000000000..8b855345e5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards
+ * using rt5682 codec.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-rt5682-max98360a-1mic";
+
+		audio-routing = "Headphone Jack", "HPOL",
+				"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "ALC5682";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+	};
+};
+
+hp_i2c: &i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,jd-src = <1>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+	};
+};
+
+&lpass_cpu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>,
+			<&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&mi2s0_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_data1 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_mclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
new file mode 100644
index 0000000000..020ef666e3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 device tree source for boards using Max98360 and wcd9385 codec
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-wcd938x-max98360a-1mic";
+
+		audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"VA DMIC3", "MIC BIAS3",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360A";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "WCD9385 Playback";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+			};
+		};
+
+		dai-link@3 {
+			link-name = "WCD9385 Capture";
+			reg = <3>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <4>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&lpass_cpu {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+
+	dai-link@6 {
+		reg = <LPASS_CDC_DMA_RX0>;
+	};
+
+	dai-link@19 {
+		reg = <LPASS_CDC_DMA_TX3>;
+	};
+
+	dai-link@25 {
+		reg = <LPASS_CDC_DMA_VA_TX0>;
+	};
+};
+
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
+&swr0 {
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+};
+
+&wcd9385 {
+	status = "okay";
+};
+
+/* PINCTRL */
+
+&lpass_dmic01_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic01_data {
+	bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic23_data {
+	bias-pull-down;
+};
+
+&lpass_rx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_rx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
+&lpass_tx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_tx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts
new file mode 100644
index 0000000000..4ee5f0b0a5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 CRD 3+ Pro board device tree source
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sc7280-herobrine-crd.dts"
+#include "sc7280-herobrine-pro-sku.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 CRD Pro platform (rev5+)";
+	compatible = "google,zoglin-sku1536", "google,hoglin-sku1536", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
new file mode 100644
index 0000000000..df39a64da9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 CRD 3+ board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-wcd9385.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
+	compatible = "google,zoglin", "google,hoglin", "qcom,sc7280";
+
+	/* FIXED REGULATORS */
+
+	/*
+	 * On most herobrine boards PPVAR_SYS directly provides VREG_EDP_BL.
+	 * However, on CRD there's an extra regulator in the way. Since this
+	 * is expected to be uncommon, we'll leave the "vreg_edp_bl" label
+	 * in the baseboard herobrine.dtsi point at "ppvar_sys" and then
+	 * make a "_crd" specific version here.
+	 */
+	vreg_edp_bl_crd: vreg-edp-bl-crd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_edp_bl_crd";
+
+		gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&apps_rsc {
+	regulators-2 {
+		compatible = "qcom,pmg1110-rpmh-regulators";
+		qcom,pmic-id = "k";
+
+		vreg_s1k_1p0: smps1 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+	};
+};
+
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <500>;
+		hid-descr-addr = <0x0000>;
+
+		vdd-supply = <&pp3300_left_in_mlb>;
+	};
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+&pm8350c_pwm_backlight {
+	power-supply = <&vreg_edp_bl_crd>;
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* For SD Card */
+&sdhc_2 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+/*
+ * This pin goes to the display panel but then doesn't actually do anything
+ * on the panel itself (it doesn't connect to the touchscreen controller).
+ * We'll set a pullup here just to park the line.
+ */
+&ts_rst_conn {
+	bias-pull-up;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to CRD board and is named it gets that name.
+ * - If a pin goes to CRD board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "EDP_BL_REG_EN",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "PCIE1_RESET_N",
+			  "PCIE1_WAKE_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "",
+			  "TPAD_INT_N",
+			  "",
+			  "",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "QSPI_DATA_0",
+			  "QSPI_DATA_1",
+			  "QSPI_CLK",
+			  "QSPI_CS_N_1",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics call it
+			   * BIOS_FLASH_WP_L (the '_L' suffix is misleading, the
+			   * signal is active high).
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_N",
+			  "",
+
+			  "CAM0_RST_N",			/* 20 */
+			  "CAM1_RST_N",
+			  "SM_DBG_UART_TX",
+			  "SM_DBG_UART_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "",
+			  "HUB_RST",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "EC_SPI_MISO_GPIO40",		/* 40 */
+			  "EC_SPI_MOSI_GPIO41",
+			  "EC_SPI_CLK_GPIO42",
+			  "EC_SPI_CS_GPIO43",
+			  "",
+			  "EARLY_EUD_EN",
+			  "",
+			  "DP_HOT_PLUG_DETECT",
+			  "AP_BRD_ID_0",
+			  "AP_BRD_ID_1",
+
+			  "AP_BRD_ID_2",		/* 50 */
+			  "NVME_PWR_REG_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "",
+			  "",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "",
+			  "",
+			  "",
+			  "CCI_I2C_SDA0",
+
+			  "CCI_I2C_SCL0",		/* 70 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "PCIE1_CLK_REQ_N",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "US_EURO_HS_SEL",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CARD_DET_CONN",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 100 */
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_N",
+			  "",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "UIM1_PRESENT",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "",
+
+			  "SDM_RFFE1_DATA",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "",
+
+			  "",				/* 130 */
+			  "",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "",
+
+			  "SAR1_INT_N",			/* 140 */
+			  "SAR0_INT_N",
+			  "",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_N",
+			  "EN_PP3300_HUB",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts
new file mode 100644
index 0000000000..14f20e7058
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-evoker.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Evoker with LTE";
+	compatible = "google,evoker-sku512", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts
new file mode 100644
index 0000000000..4f781fe25c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-evoker.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Evoker";
+	compatible = "google,evoker", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
new file mode 100644
index 0000000000..0add7a2a09
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682-3mic.dtsi"
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+ts_i2c: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5d {
+		compatible = "goodix,gt7986u", "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&ts_avdd>;
+		mainboard-vddio-supply = <&ts_avccio>;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwmleds {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+	bias-disable;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "SC_GPIO_81",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
new file mode 100644
index 0000000000..b04888a982
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Herobrine (rev1+)";
+	compatible = "google,herobrine", "qcom,sc7280";
+};
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+&pp3300_fp_mcu {
+	status = "okay";
+};
+
+&pp2850_vcm_wf_cam {
+	status = "okay";
+};
+
+&pp2850_wf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp1200_wf_cam {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+/*
+ * Although the trackpad is really part of the herobrine baseboard, we'll
+ * put the actual definition in the board device tree since different boards
+ * might hook up different trackpads (or no i2c trackpad at all in the case
+ * of tablets / detachables).
+ */
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+/*
+ * The touchscreen connector might come off the Qcard, at least in the case of
+ * eDP. Like the trackpad, we'll put it in the board device tree file since
+ * different boards have different touchscreens.
+ */
+ts_i2c: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <500>;
+		hid-descr-addr = <0x0000>;
+
+		vdd-supply = <&ts_avdd>;
+	};
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* For SD Card */
+&sdhc_2 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+/*
+ * This pin goes to the display panel but then doesn't actually do anything
+ * on the panel itself (it doesn't connect to the touchscreen controller).
+ * We'll set a pullup here just to park the line.
+ */
+&ts_rst_conn {
+	bias-pull-up;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "SC_GPIO_81",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
new file mode 100644
index 0000000000..95505549ad
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine dts fragment for LTE SKUs
+ *
+ * Copyright 2022 Google LLC.
+ */
+/* Modem setup is different on Chrome setups than typical Qualcomm setup */
+
+/ {
+	reserved-memory {
+		mpss_mem: memory@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		mba_mem: memory@9c700000 {
+			reg = <0x0 0x9c700000 0x0 0x200000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "modem";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	compatible = "qcom,sc7280-mss-pil";
+
+	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+		 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+		 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+		 <&rpmhcc RPMH_PKA_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+
+	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+	interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+	memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
+	firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
+			"qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+		 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+	reset-names = "mss_restart", "pdc_reset";
+
+	qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
+	qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>;
+	qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>;
+
+	status = "okay";
+};
+
+/* Increase the size from 2.5MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x9c900000 0x0 0x800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi
new file mode 100644
index 0000000000..1aed02297f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine dts fragment for NVMe SKUs
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi
new file mode 100644
index 0000000000..fb4bbe8aed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Google Herobrine dts fragment for PRO SKUs
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/delete-node/ &vreg_s9c_0p676;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
new file mode 100644
index 0000000000..73e24cc55a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-villager.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Villager (rev0)";
+	compatible = "google,villager-rev0", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
new file mode 100644
index 0000000000..d71cc4bbc4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-villager-r1.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Villager (rev1+) with LTE";
+	compatible = "google,villager-sku512", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
new file mode 100644
index 0000000000..edb52f12f0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-villager-r1.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Villager (rev1+)";
+	compatible = "google,villager", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi
new file mode 100644
index 0000000000..b25df5a991
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sc7280-herobrine-villager.dtsi"
+#include "sc7280-herobrine-audio-wcd9385.dtsi"
+
+&lpass_va_macro {
+	vdd-micb-supply = <&pp1800_l2c>;
+};
+
+&sound {
+	audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "vdd-micb",
+			"VA DMIC1", "vdd-micb",
+			"VA DMIC2", "vdd-micb",
+			"VA DMIC3", "vdd-micb",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
new file mode 100644
index 0000000000..38c8a3679f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine.dtsi"
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		hid-descr-addr = <0x20>;
+		vdd-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+ts_i2c: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+
+		vcc33-supply = <&ts_avdd>;
+		vccio-supply = <&ts_avccio>;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+&pwmleds {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+	bias-disable;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "SC_GPIO_81",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
new file mode 100644
index 0000000000..2febd6126d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Google Herobrine dts fragment for WIFI SKUs
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
+
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
new file mode 100644
index 0000000000..c9fe645295
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Zombie with LTE";
+	compatible = "google,zombie-sku512", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts
new file mode 100644
index 0000000000..e1fcacdccd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+#include "sc7280-herobrine-nvme-sku.dtsi"
+
+/ {
+	model = "Google Zombie with LTE and NVMe";
+	compatible = "google,zombie-sku514", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts
new file mode 100644
index 0000000000..e3d52c5603
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+#include "sc7280-herobrine-nvme-sku.dtsi"
+
+/ {
+	model = "Google Zombie with NVMe";
+	compatible = "google,zombie-sku2","google,zombie-sku3","google,zombie-sku515", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
new file mode 100644
index 0000000000..0246c12b2f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Zombie";
+	compatible = "google,zombie", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
new file mode 100644
index 0000000000..a4fde22e33
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		hid-descr-addr = <0x01>;
+		vdd-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+&pm8350c_pwm_backlight {
+	/* Set the PWM period to 320 microseconds (3.125kHz frequency) */
+	pwms = <&pm8350c_pwm 3 320000>;
+};
+
+&pwmleds {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+	bias-disable;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "US_EURO_HS_SEL",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
new file mode 100644
index 0000000000..9ea6636125
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -0,0 +1,944 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine baseboard device tree source
+ *
+ * The set of things in this file is a bit loosely defined. It's roughly
+ * defined as the set of things that the child boards happen to have in
+ * common. Since all of the child boards started from the same original
+ * design this is hopefully a large set of things but as more derivatives
+ * appear things may "bubble down" out of this file. For things that are
+ * part of the reference design but might not exist on child nodes we will
+ * follow the lead of the SoC dtsi files and leave their status as "disabled".
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "sc7280-qcard.dtsi"
+#include "sc7280-chrome-common.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/*
+	 * FIXED REGULATORS
+	 *
+	 * Sort order:
+	 * 1. parents above children.
+	 * 2. higher voltage above lower voltage.
+	 * 3. alphabetically by node name.
+	 */
+
+	/* This is the top level supply and variable voltage */
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This divides ppvar_sys by 2, so voltage is variable */
+	src_vph_pwr: src-vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vph_pwr";
+
+		/* EC turns on with switchcap_on; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_s5: pp5000-s5-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_s5";
+
+		/* EC turns on with en_pp5000_s5; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_z1: pp3300-z1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z1";
+
+		/* EC turns on with en_pp3300_z1; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_codec: pp3300-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_codec";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 105 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_codec>;
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	pp3300_left_in_mlb: pp3300-left-in-mlb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_left_in_mlb";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_dx_edp>;
+
+		regulator-enable-ramp-delay = <3000>;
+
+		/*
+		 * eDP panel specs nearly always have a spec that says you
+		 * shouldn't turn them off an on again without waiting 500ms.
+		 * Add this as a board constraint since this rail is shared
+		 * between the panel and touchscreen.
+		 */
+		off-on-delay-us = <500000>;
+
+		/*
+		 * Stat the regulator on. This has the advantage of starting
+		 * the slow process of powering the panel on as soon as we
+		 * probe the regulator. It also avoids tripping the
+		 * off-on-delay immediately on every bootup.
+		 */
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_mcu_fp:
+	pp3300_fp_ls:
+	pp3300_fp_mcu: pp3300-fp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_fp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		/*
+		 * WARNING: it is intentional that GPIO 77 isn't listed here.
+		 * The userspace script for updating the fingerprint firmware
+		 * needs to control the FP regulators during a FW update,
+		 * hence the signal can't be owned by the kernel regulator.
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_fp_rails>;
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	pp3300_hub: pp3300-hub-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_hub";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* The BIOS leaves this regulator on */
+		regulator-boot-on;
+
+		gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hub_en>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_tp: pp3300-tp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_tp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* AP turns on with PP1800_L18B_S0; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_ssd: pp3300-ssd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ssd";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssd_en>;
+
+		/*
+		 * The bootloaer may have left PCIe configured. Powering this
+		 * off while the PCIe clocks are still running isn't great,
+		 * so it's better to default to this regulator being on.
+		 */
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2850_vcm_wf_cam";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wf_cam_en>;
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	pp2850_wf_cam: pp2850-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2850_wf_cam";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	pp1800_fp: pp1800-fp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_fp";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		/*
+		 * WARNING: it is intentional that GPIO 77 isn't listed here.
+		 * The userspace script for updating the fingerprint firmware
+		 * needs to control the FP regulators during a FW update,
+		 * hence the signal can't be owned by the kernel regulator.
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_fp_rails>;
+
+		vin-supply = <&pp1800_l18b_s0>;
+		status = "disabled";
+	};
+
+	pp1800_wf_cam: pp1800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_wf_cam";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&vreg_l19b_s0>;
+		status = "disabled";
+	};
+
+	pp1200_wf_cam: pp1200-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1200_wf_cam";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	max98360a: audio-codec-0 {
+		compatible = "maxim,max98360a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&amp_en>;
+		sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	pwmleds: pwmleds {
+		compatible = "pwm-leds";
+		status = "disabled";
+		keyboard_backlight: led-0 {
+			label = "cros_ec::kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+/*
+ * ADJUSTMENTS TO QCARD REGULATORS
+ *
+ * Mostly this is just board-local names for regulators that come from
+ * Qcard, but this also has some minor regulator overrides.
+ *
+ * Names are only listed here if regulators go somewhere other than a
+ * testpoint.
+ */
+
+/* From Qcard to our board; ordered by PMIC-ID / rail number */
+
+pp1256_s8b: &vreg_s8b_1p256 {};
+
+pp1800_l18b_s0: &vreg_l18b_1p8 {};
+pp1800_l18b:    &vreg_l18b_1p8 {};
+
+vreg_l19b_s0: &vreg_l19b_1p8 {};
+
+pp1800_alc5682: &vreg_l2c_1p8 {};
+pp1800_l2c:     &vreg_l2c_1p8 {};
+
+vreg_l4c: &vreg_l4c_1p8_3p0 {};
+
+ppvar_l6c: &vreg_l6c_2p96 {};
+
+pp3000_l7c: &vreg_l7c_3p0 {};
+
+pp1800_prox: &vreg_l8c_1p8 {};
+pp1800_l8c:  &vreg_l8c_1p8 {};
+
+pp2950_l9c: &vreg_l9c_2p96 {};
+
+pp1800_lcm:  &vreg_l12c_1p8 {};
+pp1800_mipi: &vreg_l12c_1p8 {};
+pp1800_l12c: &vreg_l12c_1p8 {};
+
+pp3300_lcm:  &vreg_l13c_3p0 {};
+pp3300_mipi: &vreg_l13c_3p0 {};
+pp3300_l13c: &vreg_l13c_3p0 {};
+
+/* From our board to Qcard; ordered same as node definition above */
+
+vreg_edp_bl: &ppvar_sys {};
+
+ts_avdd:      &pp3300_left_in_mlb {};
+vreg_edp_3p3: &pp3300_left_in_mlb {};
+
+/* Regulator overrides from Qcard */
+
+/*
+ * Herobrine boards only use l2c to power an external audio codec (like
+ * alc5682) and we want that to be at 1.8V, not at some slightly lower voltage.
+ */
+&vreg_l2c_1p8 {
+	regulator-min-microvolt = <1800000>;
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&edp_panel {
+	/* Our board provides power to the qcard for the eDP panel. */
+	power-supply = <&vreg_edp_3p3>;
+};
+
+ap_sar_sensor_i2c: &i2c1 {
+	clock-frequency = <400000>;
+	status = "disabled";
+
+	ap_sar_sensor0: proximity@28 {
+		compatible = "semtech,sx9324";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sar0_irq_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <141 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&pp1800_prox>;
+
+		label = "proximity-wifi_cellular-0";
+		status = "disabled";
+	};
+
+	ap_sar_sensor1: proximity@2c {
+		compatible = "semtech,sx9324";
+		reg = <0x2c>;
+		#io-channel-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sar1_irq_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <140 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&pp1800_prox>;
+
+		label = "proximity-wifi_cellular-1";
+		status = "disabled";
+	};
+};
+
+ap_i2c_tpm: &i2c14 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsc_ap_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <104 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hot_plug_det>;
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
+};
+
+/* NVMe drive, enabled on a per-board basis */
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>;
+
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&pp3300_ssd>;
+};
+
+&pm8350c_pwm {
+	status = "okay";
+};
+
+&pm8350c_pwm_backlight {
+	status = "okay";
+
+	/* Our board provides power to the qcard for the backlight */
+	power-supply = <&vreg_edp_bl>;
+};
+
+&pmk8350_rtc {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+/* SD Card, enabled on a per-board basis */
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd_odl>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd_odl>;
+
+	vmmc-supply = <&pp2950_l9c>;
+	vqmmc-supply = <&ppvar_l6c>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
+&spi_flash {
+	spi-max-frequency = <50000000>;
+};
+
+/* Fingerprint, enabled on a per-board basis */
+ap_spi_fp: &spi9 {
+	pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>;
+
+	cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	cros_ec_fp: ec@0 {
+		compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <61 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <3000000>;
+		vdd-supply = <&pp3300_fp_mcu>;
+	};
+};
+
+ap_ec_spi: &spi10 {
+	status = "okay";
+	pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
+
+	cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&pp3300_hub>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&pp3300_hub>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&dp_hot_plug_det {
+	bias-disable;
+};
+
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
+&qspi_cs0 {
+	bias-disable;		/* External pullup */
+	drive-strength = <8>;
+};
+
+&qspi_clk {
+	bias-pull-down;		/* No external pulls */
+	drive-strength = <8>;
+};
+
+&qspi_data0 {
+	bias-pull-down;		/* No external pulls */
+	drive-strength = <8>;
+};
+
+&qspi_data1 {
+	bias-disable;		/* External pulldown */
+	drive-strength = <8>;
+};
+
+/* For ap_tp_i2c */
+&qup_i2c0_data_clk {
+	/* Has external pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_i2c_tpm */
+&qup_i2c14_data_clk {
+	/* Has external pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_spi_fp */
+&qup_spi9_data_clk {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_spi_fp */
+&qup_spi9_cs_gpio {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_ec_spi */
+&qup_spi10_data_clk {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_ec_spi */
+&qup_spi10_cs_gpio {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For uart_dbg */
+&qup_uart5_rx {
+	bias-pull-up;
+};
+
+/* For uart_dbg */
+&qup_uart5_tx {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&pm7325_gpios {
+	/*
+	 * On a quick glance it might look like KYPD_VOL_UP_N is used, but
+	 * that only passes through to a debug connector and not to the actual
+	 * volume up key.
+	 */
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&pmk8350_gpios {
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&tlmm {
+	/* pinctrl settings for pins that have no real owners. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&bios_flash_wp_od>;
+
+	amp_en: amp-en-state {
+		pins = "gpio63";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ap_ec_int_l: ap-ec-int-l-state {
+		pins = "gpio18";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	bios_flash_wp_od: bios-flash-wp-od-state {
+		pins = "gpio16";
+		function = "gpio";
+		/* Has external pull */
+		bias-disable;
+	};
+
+	en_fp_rails: en-fp-rails-state {
+		pins = "gpio77";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-high;
+	};
+
+	en_pp3300_codec: en-pp3300-codec-state {
+		pins = "gpio105";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
+		pins = "gpio80";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	fp_rst_l: fp-rst-l-state {
+		pins = "gpio78";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
+		pins = "gpio61";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	fpmcu_boot0: fpmcu-boot0-state {
+		pins = "gpio68";
+		function = "gpio";
+		bias-disable;
+	};
+
+	gsc_ap_int_odl: gsc-ap-int-odl-state {
+		pins = "gpio104";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	hp_irq: hp-irq-state {
+		pins = "gpio101";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	hub_en: hub-en-state {
+		pins = "gpio157";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	pe_wake_odl: pe-wake-odl-state {
+		pins = "gpio3";
+		function = "gpio";
+		/* Has external pull */
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	/* For ap_spi_fp */
+	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-state {
+		pins = "gpio39";
+		function = "gpio";
+		output-high;
+	};
+
+	/* For ap_ec_spi */
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
+		pins = "gpio43";
+		function = "gpio";
+		output-high;
+	};
+
+	sar0_irq_odl: sar0-irq-odl-state {
+		pins = "gpio141";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sar1_irq_odl: sar1-irq-odl-state {
+		pins = "gpio140";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sd_cd_odl: sd-cd-odl-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ssd_en: ssd-en-state {
+		pins = "gpio51";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ssd_rst_l: ssd-rst-l-state {
+		pins = "gpio2";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	tp_int_odl: tp-int-odl-state {
+		pins = "gpio7";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	wf_cam_en: wf-cam-en-state {
+		pins = "gpio119";
+		function = "gpio";
+		/* Has external pulldown */
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
new file mode 100644
index 0000000000..ebae545c58
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 EC/H1 over SPI (common between IDP2 and CRD)
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+ap_ec_spi: &spi10 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
+	cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+ap_h1_spi: &spi14 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs_gpio_init_high>, <&qup_spi14_cs_gpio>;
+	cs-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+
+	cr50: tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <104 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&tlmm {
+	ap_ec_int_l: ap-ec-int-l-state {
+		pins = "gpio18";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	h1_ap_int_odl: h1-ap-int-odl-state {
+		pins = "gpio104";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
+		pins = "gpio43";
+		function = "gpio";
+		output-high;
+	};
+
+	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state {
+		pins = "gpio59";
+		function = "gpio";
+		output-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
new file mode 100644
index 0000000000..b5fe7356be
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 IDP board device tree source
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include "sc7280-idp.dtsi"
+#include "pmr735a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
+	compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-2 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_l2e_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1020000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1890000>;
+		};
+
+		vreg_l5e_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6e_0p8: ldo6 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <904000>;
+		};
+	};
+};
+
+&bluetooth {
+	vddio-supply = <&vreg_l19b_1p8>;
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&nvme_pwren {
+	pins = "gpio19";
+};
+
+&nvme_3v3_regulator {
+	gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+};
+
+&pmk8350_vadc {
+	channel@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		label = "pmr735a_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "otg";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l10c_0p8>;
+	vdda33-supply = <&vreg_l2b_3p0>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
new file mode 100644
index 0000000000..2ff549f4dc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -0,0 +1,835 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 IDP board device tree source (common between SKU1 and SKU2)
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+#include "sc7280-chrome-common.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial1 = &uart7;
+		wifi0 = &wifi;
+	};
+
+	max98360a: audio-codec-0 {
+		compatible = "maxim,max98360a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&amp_en>;
+		sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	wcd9385: audio-codec-1 {
+		compatible = "qcom,wcd9385-codec";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&wcd_reset_n>;
+		pinctrl-1 = <&wcd_reset_n_sleep>;
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
+
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-io-supply = <&vreg_l18b_1p8>;
+		vdd-buck-supply = <&vreg_l17b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+							  500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+
+	nvme_3v3_regulator: nvme-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VLDO_3V3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_pwren>;
+	};
+
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-wcd938x-max98360a-1mic";
+
+		audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS3",
+			"VA DMIC1", "MIC BIAS3",
+			"VA DMIC2", "MIC BIAS1",
+			"VA DMIC3", "MIC BIAS1",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360A";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "WCD9385 Playback";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+			};
+		};
+
+		dai-link@3 {
+			link-name = "WCD9385 Capture";
+			reg = <3>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <4>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_s1b_1p8: smps1 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b_0p9: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p2: smps8 {
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1500000>;
+		};
+
+		vreg_l1b_0p8: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+		};
+
+		vreg_l7b_2p9: ldo7 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l8b_0p9: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l11b_1p7: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l12b_0p8: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+		};
+
+		vreg_l13b_0p8: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+		};
+
+		vreg_l14b_1p2: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l15b_0p8: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+		};
+
+		vreg_l16b_1p2: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_l17b_1p8: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s1c_2p2: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s9c_1p0: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10c_0p8: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&lpass_cpu {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+
+	dai-link@6 {
+		reg = <LPASS_CDC_DMA_RX0>;
+	};
+
+	dai-link@19 {
+		reg = <LPASS_CDC_DMA_TX3>;
+	};
+
+	dai-link@25 {
+		reg = <LPASS_CDC_DMA_VA_TX0>;
+	};
+};
+
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+	vdd-micb-supply = <&vreg_bob>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&nvme_3v3_regulator>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
+};
+
+&pcie1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pmk8350_vadc {
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&qfprom {
+	vcc-supply = <&vreg_l1c_1p8>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p9>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
+&swr0 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 2 3 4>;
+	};
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l10c_0p8>;
+	vdda33-supply = <&vreg_l2b_3p0>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p8>;
+};
+
+&uart7 {
+	status = "okay";
+
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en>, <&sw_ctrl>;
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vddaon-supply = <&vreg_s7b_0p9>;
+		vddbtcxmx-supply = <&vreg_s7b_0p9>;
+		vddrfacmn-supply = <&vreg_s7b_0p9>;
+		vddrfa0p8-supply = <&vreg_s7b_0p9>;
+		vddrfa1p7-supply = <&vreg_s1b_1p8>;
+		vddrfa1p2-supply = <&vreg_s8b_1p2>;
+		vddrfa2p2-supply = <&vreg_s1c_2p2>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		max-speed = <3200000>;
+	};
+};
+
+/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+
+&dp_hot_plug_det {
+	bias-disable;
+};
+
+&lpass_dmic01_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic01_data {
+	bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic23_data {
+	bias-pull-down;
+};
+
+&lpass_rx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_rx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
+&lpass_tx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_tx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+};
+
+&pm7325_gpios {
+	key_vol_up_default: key-vol-up-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+		qcom,drive-strength = <3>;
+	};
+};
+
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
+&qspi_cs0 {
+	bias-disable;		/* External pullup */
+};
+
+&qspi_clk {
+	bias-pull-down;		/* No external pulls or external pulldown */
+};
+
+&qspi_data0 {
+	bias-pull-down;		/* No external pulls or external pulldown */
+};
+
+&qspi_data1 {
+	bias-pull-down;		/* No external pulls or external pulldown */
+};
+
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart5_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart7_cts {
+	/*
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
+	 */
+	bias-bus-hold;
+};
+
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&tlmm {
+	amp_en: amp-en-state {
+		pins = "gpio63";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	bt_en: bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	nvme_pwren: nvme-pwren-state {
+		function = "gpio";
+	};
+
+	pcie1_reset_n: pcie1-reset-n-state {
+		pins = "gpio2";
+		function = "gpio";
+
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	pcie1_wake_n: pcie1-wake-n-state {
+		pins = "gpio3";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	sd_cd: sd-cd-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sw_ctrl: sw-ctrl-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	wcd_reset_n: wcd-reset-n-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+	};
+
+	wcd_reset_n_sleep: wcd-reset-n-sleep-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
new file mode 100644
index 0000000000..d4f7cab170
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 IDP2 board device tree source
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sc7280-idp.dtsi"
+#include "sc7280-idp-ec-h1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform";
+	compatible = "qcom,sc7280-idp2", "google,piglin", "qcom,sc7280";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&bluetooth {
+	vddio-supply = <&vreg_l18b_1p8>;
+};
+
+&nvme_pwren {
+	pins = "gpio51";
+};
+
+&nvme_3v3_regulator {
+	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+};
+
+&pm8350c_pwm {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
new file mode 100644
index 0000000000..f9b96bd247
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -0,0 +1,680 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 Qcard device tree source
+ *
+ * Qcard PCB has the processor, RAM, eMMC (if stuffed), and eDP connector (if
+ * stuffed) on it. This device tree tries to encapsulate all the things that
+ * all boards using Qcard will have in common. Given that there are stuffing
+ * options, some things may be left with status "disabled" and enabled in
+ * the actual board device tree files.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc7280.dtsi"
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial0 = &uart5;
+		serial1 = &uart7;
+		wifi0 = &wifi;
+	};
+
+	wcd9385: audio-codec-1 {
+		compatible = "qcom,wcd9385-codec";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
+		pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
+		us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-io-supply = <&vreg_l18b_1p8>;
+		vdd-buck-supply = <&vreg_l17b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+							  500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		#sound-dai-cells = <1>;
+
+		status = "disabled";
+	};
+
+	pm8350c_pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		status = "disabled";
+
+		enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_edp_bl_en>;
+		pwms = <&pm8350c_pwm 3 65535>;
+	};
+};
+
+&apps_rsc {
+	/*
+	 * Regulators are given labels corresponding to the various names
+	 * they are referred to on schematics. They are also given labels
+	 * corresponding to named voltage inputs on the SoC or components
+	 * bundled with the SoC (like radio companion chips). We totally
+	 * ignore it when one regulator is the input to another regulator.
+	 * That's handled automatically by the initial config given to
+	 * RPMH by the firmware.
+	 *
+	 * Regulators that the HLOS (High Level OS) doesn't touch at all
+	 * are left out of here since they are managed elsewhere.
+	 */
+
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd19_pmu_pcie_i:
+		vdd19_pmu_rfa_i:
+		vreg_s1b_1p856: smps1 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vdd_pmu_aon_i:
+		vdd09_pmu_rfa_i:
+		vdd095_mx_pmu:
+		vdd095_pmu:
+		vreg_s7b_0p952: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vdd13_pmu_rfa_i:
+		vdd13_pmu_pcie_i:
+		vreg_s8b_1p256: smps8 {
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1500000>;
+		};
+
+		vdd_a_usbssdp_0_core:
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_usbhs_3p1:
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_0_1_1p2:
+		vdd_a_csi_2_3_1p2:
+		vdd_a_csi_4_1p2:
+		vdd_a_dsi_0_1p2:
+		vdd_a_edp_0_1p2:
+		vdd_a_qlink_0_1p2:
+		vdd_a_qlink_1_1p2:
+		vdd_a_pcie_0_1p2:
+		vdd_a_pcie_1_1p2:
+		vdd_a_ufs_0_1p2:
+		vdd_a_usbssdp_0_1p2:
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * Despite the fact that this is named to be 2.5V on the
+		 * schematic, it powers eMMC which doesn't accept 2.5V
+		 */
+		vreg_l7b_2p5: ldo7 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p8: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_px_wcd9385:
+		vdd_txrx:
+		vddpx_0:
+		vddpx_3:
+		vddpx_7:
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_1p8:
+		vdd_px_sdr735:
+		vdd_pxm:
+		vdd18_io:
+		vddio_px_1:
+		vddio_px_2:
+		vddio_px_3:
+		vddpx_ts:
+		vddpx_wl4otp:
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd22_wlbtpa_ch0:
+		vdd22_wlbtpa_ch1:
+		vdd22_wlbtppa_ch0:
+		vdd22_wlbtppa_ch1:
+		vdd22_wlpa5g_ch0:
+		vdd22_wlpa5g_ch1:
+		vdd22_wlppa5g_ch0:
+		vdd22_wlppa5g_ch1:
+		vreg_s1c_2p2: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		lp4_vdd2_1p052:
+		vreg_s9c_0p676: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_turing_q6_cs_1p8:
+		vdd_a_cxo_1p8:
+		vdd_a_qrefs_1p8:
+		vdd_a_usbhs_1p8:
+		vdd_qfprom:
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * The initial design of this regulator was to use it as 3.3V,
+		 * but due to later changes in design it was changed to 1.8V.
+		 * The original name is kept due to same schematic.
+		 */
+		ts_avccio:
+		vreg_l3c_3p0: ldo3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8_3p0: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8_3p0: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_0_1_0p9:
+		vdd_a_csi_2_3_0p9:
+		vdd_a_csi_4_0p9:
+		vdd_a_dsi_0_0p9:
+		vdd_a_dsi_0_pll_0p9:
+		vdd_a_edp_0_0p9:
+		vdd_a_gnss_0p9:
+		vdd_a_pcie_0_core:
+		vdd_a_pcie_1_core:
+		vdd_a_qlink_0_0p9:
+		vdd_a_qlink_0_0p9_ck:
+		vdd_a_qlink_1_0p9:
+		vdd_a_qlink_1_0p9_ck:
+		vdd_a_qrefs_0p875_0:
+		vdd_a_qrefs_0p875_1:
+		vdd_a_qrefs_0p875_2:
+		vdd_a_qrefs_0p875_3:
+		vdd_a_qrefs_0p875_4_5:
+		vdd_a_qrefs_0p875_6:
+		vdd_a_qrefs_0p875_7:
+		vdd_a_qrefs_0p875_8:
+		vdd_a_qrefs_0p875_9:
+		vdd_a_ufs_0_core:
+		vdd_a_usbhs_core:
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_flash:
+		vdd_iris_rgb:
+		vdd_mic_bias:
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&lpass_va_macro {
+	vdd-micb-supply = <&vreg_bob>;
+};
+
+/* NOTE: Not all Qcards have eDP connector stuffed */
+&mdss_edp {
+	aux-bus {
+		edp_panel: panel {
+			compatible = "edp-panel";
+
+			backlight = <&pm8350c_pwm_backlight>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_edp_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_edp_out {
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_edp_phy {
+	vdda-pll-supply = <&vdd_a_edp_0_0p9>;
+	vdda-phy-supply = <&vdd_a_edp_0_1p2>;
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pm8350c_pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_edp_bl_pwm>;
+};
+
+&pmk8350_vadc {
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		label = "pmr735a_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&qfprom {
+	vcc-supply = <&vdd_qfprom>;
+};
+
+/* For eMMC. NOTE: not all Qcards have eMMC stuffed */
+&sdhc_1 {
+	vmmc-supply = <&vreg_l7b_2p5>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&swr0 {
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 2 3 4>;
+	};
+};
+
+uart_dbg: &uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+mos_bt_uart: &uart7 {
+	status = "okay";
+
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mos_bt_en>;
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vddaon-supply = <&vreg_s7b_0p952>;
+		vddbtcxmx-supply = <&vreg_s7b_0p952>;
+		vddrfacmn-supply = <&vreg_s7b_0p952>;
+		vddrfa0p8-supply = <&vreg_s7b_0p952>;
+		vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
+		vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
+		vddrfa2p2-supply = <&vreg_s1c_2p2>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		vddio-supply = <&vreg_l18b_1p8>;
+		max-speed = <3200000>;
+	};
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vdd_a_usbhs_core>;
+	vdda33-supply = <&vdd_a_usbhs_3p1>;
+	vdda18-supply = <&vdd_a_usbhs_1p8>;
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdd_a_usbssdp_0_1p2>;
+	vdda-pll-supply = <&vdd_a_usbssdp_0_core>;
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vdd_a_usbhs_core>;
+	vdda33-supply = <&vdd_a_usbhs_3p1>;
+	vdda18-supply = <&vdd_a_usbhs_1p8>;
+};
+
+/*
+ * PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES
+ *
+ * NOTE: In general if pins leave the Qcard then the pinctrl goes in the
+ * baseboard or board device tree, not here.
+ */
+
+/* No external pull for eDP HPD, so set the internal one. */
+&edp_hot_plug_det {
+	bias-pull-down;
+};
+
+/*
+ * For ts_i2c
+ *
+ * Technically this i2c bus actually leaves the Qcard, but it leaves directly
+ * via the eDP connector (it doesn't hit the baseboard). The external pulls
+ * are on Qcard.
+ */
+&qup_i2c13_data_clk {
+	/* Has external pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_cts {
+	/*
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
+	 */
+	bias-bus-hold;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+/* eMMC, if stuffed, is straight on the Qcard */
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+/*
+ * PINCTRL - QCARD
+ *
+ * This has entries that are defined by Qcard even if they go to the main
+ * board. In cases where the pulls may be board dependent we defer those
+ * settings to the board device tree. Drive strengths tend to be assinged here
+ * but could conceivably be overwridden by board device trees.
+ */
+
+&pm8350c_gpios {
+	pmic_edp_bl_en: pmic-edp-bl-en-state {
+		pins = "gpio7";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+
+		/* Force backlight to be disabled to match state at boot. */
+		output-low;
+	};
+
+	pmic_edp_bl_pwm: pmic-edp-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		output-low;
+		power-source = <0>;
+	};
+};
+
+&tlmm {
+	mos_bt_en: mos-bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		output-low;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	ts_int_conn: ts-int-conn-state {
+		pins = "gpio55";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_rst_conn: ts-rst-conn-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+	};
+
+	us_euro_hs_sel: us-euro-hs-sel-state {
+		pins = "gpio81";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	wcd_reset_n: wcd-reset-n-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+	};
+
+	wcd_reset_n_sleep: wcd-reset-n-sleep-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
new file mode 100644
index 0000000000..8e330d2e2e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -0,0 +1,6239 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 SoC device tree source
+ *
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ */
+#include <dt-bindings/clock/qcom,camcc-sc7280.h>
+#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+#include <dt-bindings/clock/qcom,gcc-sc7280.h>
+#include <dt-bindings/clock/qcom,gpucc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,videocc-sc7280.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sc7280.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,lpass.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		mmc1 = &sdhc_1;
+		mmc2 = &sdhc_2;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		wlan_ce_mem: memory@4cd000 {
+			no-map;
+			reg = <0x0 0x004cd000 0x0 0x1000>;
+		};
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@80600000 {
+			reg = <0x0 0x80600000 0x0 0x200000>;
+			no-map;
+		};
+
+		aop_mem: memory@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: memory@80860000 {
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			compatible = "qcom,cmd-db";
+			no-map;
+		};
+
+		reserved_xbl_uefi_log: memory@80880000 {
+			reg = <0x0 0x80884000 0x0 0x10000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@808ff000 {
+			reg = <0x0 0x808ff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		cpucp_mem: memory@80b00000 {
+			no-map;
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+		};
+
+		wlan_fw_mem: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0xc00000>;
+			no-map;
+		};
+
+		video_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8b700000 {
+			reg = <0 0x8b700000 0 0x10000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@9c900000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x9c900000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_200>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_300>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_400>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_500>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_600>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_700>;
+			operating-points-v2 = <&cpu7_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "cluster-power-down";
+				arm,psci-suspend-param = <0x40003444>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9926>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp_300mhz: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp_691mhz: opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <800000 17817600>;
+		};
+
+		cpu0_opp_806mhz: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <800000 20889600>;
+		};
+
+		cpu0_opp_941mhz: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <1804000 24576000>;
+		};
+
+		cpu0_opp_1152mhz: opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-peak-kBps = <2188000 27033600>;
+		};
+
+		cpu0_opp_1325mhz: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 33792000>;
+		};
+
+		cpu0_opp_1517mhz: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 38092800>;
+		};
+
+		cpu0_opp_1651mhz: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <3072000 41779200>;
+		};
+
+		cpu0_opp_1805mhz: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 48537600>;
+		};
+
+		cpu0_opp_1958mhz: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <4068000 48537600>;
+		};
+
+		cpu0_opp_2016mhz: opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <6220000 48537600>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp_691mhz: opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <1804000 9600000>;
+		};
+
+		cpu4_opp_941mhz: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 17817600>;
+		};
+
+		cpu4_opp_1229mhz: opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu4_opp_1344mhz: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu4_opp_1517mhz: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu4_opp_1651mhz: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu4_opp_1901mhz: opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2054mhz: opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2112mhz: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2131mhz: opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2208mhz: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2400mhz: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu4_opp_2611mhz: opp-2611200000 {
+			opp-hz = /bits/ 64 <2611200000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+	};
+
+	cpu7_opp_table: opp-table-cpu7 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu7_opp_806mhz: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <1804000 9600000>;
+		};
+
+		cpu7_opp_1056mhz: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <2188000 17817600>;
+		};
+
+		cpu7_opp_1325mhz: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu7_opp_1517mhz: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu7_opp_1766mhz: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu7_opp_1862mhz: opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu7_opp_2035mhz: opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu7_opp_2112mhz: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu7_opp_2208mhz: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu7_opp_2381mhz: opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <6832000 44851200>;
+		};
+
+		cpu7_opp_2400mhz: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu7_opp_2515mhz: opp-2515200000 {
+			opp-hz = /bits/ 64 <2515200000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu7_opp_2707mhz: opp-2707200000 {
+			opp-hz = /bits/ 64 <2707200000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu7_opp_3014mhz: opp-3014400000 {
+			opp-hz = /bits/ 64 <3014400000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sc7280", "qcom,scm";
+		};
+	};
+
+	clk_virt: interconnect {
+		compatible = "qcom,sc7280-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_WPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <13>;
+
+		wpss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wpss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wlan_smp2p_out: wlan-ap-to-wpss {
+			qcom,entry-name = "wlan";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	qspi_opp_table: opp-table-qspi {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc7280";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+				 <0>, <&pcie1_lane>,
+				 <0>, <0>, <0>,
+				 <&usb_1_ssphy>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
+				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
+				      "ufs_phy_tx_symbol_0_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SC7280_CX>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sc7280-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,sc7280-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0xa20>,
+			      <0 0x00780000 0 0xa20>,
+			      <0 0x00782000 0 0x120>,
+			      <0 0x00786000 0 0x1fff>;
+			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+			clock-names = "core";
+			power-domains = <&rpmhpd SC7280_MX>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@1e9 {
+				reg = <0x1e9 0x2>;
+				bits = <5 8>;
+			};
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
+			pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
+			status = "disabled";
+
+			reg = <0 0x007c4000 0 0x1000>,
+			      <0 0x007c5000 0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			iommus = <&apps_smmu 0xc0 0x0>;
+			interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd SC7280_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			bus-width = <8>;
+			supports-cqe;
+			dma-coherent;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 400000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <390000 0>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00900000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7f>;
+			iommus = <&apps_smmu 0x0136 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x009c0000 0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x123 0x0>;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00980000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart1: serial@984000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00984000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0098c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart3: serial@98c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0098c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@990000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00990000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00994000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0099c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x1e>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x43 0x0>;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart10: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart11: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart14: serial@a98000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a98000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart15: serial@a9c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>;
+				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		cnoc2: interconnect@1500000 {
+			reg = <0 0x01500000 0 0x1000>;
+			compatible = "qcom,sc7280-cnoc2";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		cnoc3: interconnect@1502000 {
+			reg = <0 0x01502000 0 0x1000>;
+			compatible = "qcom,sc7280-cnoc3";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1580000 {
+			reg = <0 0x01580000 0 0x4>;
+			compatible = "qcom,sc7280-mc-virt";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			reg = <0 0x01680000 0 0x15480>;
+			compatible = "qcom,sc7280-system-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc7280-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1c080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			reg = <0 0x01700000 0 0x2b080>;
+			compatible = "qcom,sc7280-aggre2-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			reg = <0 0x01740000 0 0x1e080>;
+			compatible = "qcom,sc7280-mmss-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		wifi: wifi@17a10040 {
+			compatible = "qcom,wcn6750-wifi";
+			reg = <0 0x17a10040 0 0x0>;
+			iommus = <&apps_smmu 0x1c00 0x1>;
+			interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
+			qcom,rproc = <&remoteproc_wpss>;
+			memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
+			status = "disabled";
+			qcom,smem-states = <&wlan_smp2p_out 0>;
+			qcom,smem-state-names = "wlan-smp2p-out";
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sc7280";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+				 <&pcie1_lane>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu",
+				      "aggre0",
+				      "aggre1";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_clkreq_n>;
+
+			dma-coherent;
+
+			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c0e200 {
+				reg = <0 0x01c0e200 0 0x170>,
+				      <0 0x01c0e400 0 0x200>,
+				      <0 0x01c0ea00 0 0x1f0>,
+				      <0 0x01c0e600 0 0x170>,
+				      <0 0x01c0e800 0 0x200>,
+				      <0 0x01c0ee00 0 0xf4>;
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sc7280-ipa";
+
+			iommus = <&apps_smmu 0x480 0x0>,
+				 <&apps_smmu 0x482 0x0>;
+			reg = <0 0x01e40000 0 0x8000>,
+			      <0 0x01e50000 0 0x4ad0>,
+			      <0 0x01e04000 0 0x23000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_1: syscon@1f60000 {
+			compatible = "qcom,sc7280-tcsr", "syscon";
+			reg = <0 0x01f60000 0 0x20000>;
+		};
+
+		tcsr_2: syscon@1fc0000 {
+			compatible = "qcom,sc7280-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0x30000>;
+		};
+
+		lpasscc: lpasscc@3000000 {
+			compatible = "qcom,sc7280-lpasscc";
+			reg = <0 0x03000000 0 0x40>,
+			      <0 0x03c04000 0 0x4>;
+			reg-names = "qdsp6ss", "top_cc";
+			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+			clock-names = "iface";
+			#clock-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
+		};
+
+		lpass_rx_macro: codec@3200000 {
+			compatible = "qcom,sc7280-lpass-rx-macro";
+			reg = <0 0x03200000 0 0x1000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+				 <&lpass_va_macro>;
+			clock-names = "mclk", "npl", "fsgen";
+
+			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+			power-domain-names = "macro", "dcodec";
+
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		swr0: soundwire@3210000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0 0x03210000 0 0x2000>;
+
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rx_macro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+			reset-names = "swr_audio_cgcr";
+
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		lpass_tx_macro: codec@3220000 {
+			compatible = "qcom,sc7280-lpass-tx-macro";
+			reg = <0 0x03220000 0 0x1000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+				 <&lpass_va_macro>;
+			clock-names = "mclk", "npl", "fsgen";
+
+			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+			power-domain-names = "macro", "dcodec";
+
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		swr1: soundwire@3230000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0 0x03230000 0 0x2000>;
+
+			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_tx_macro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <3>;
+			qcom,dout-ports = <0>;
+
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
+			reset-names = "swr_audio_cgcr";
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		lpass_audiocc: clock-controller@3300000 {
+			compatible = "qcom,sc7280-lpassaudiocc";
+			reg = <0 0x03300000 0 0x30000>,
+			      <0 0x032a9000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+			       <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+			clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+			power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		lpass_va_macro: codec@3370000 {
+			compatible = "qcom,sc7280-lpass-va-macro";
+			reg = <0 0x03370000 0 0x1000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
+			clock-names = "mclk";
+
+			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+			power-domain-names = "macro", "dcodec";
+
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		lpass_aon: clock-controller@3380000 {
+			compatible = "qcom,sc7280-lpassaoncc";
+			reg = <0 0x03380000 0 0x30000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+			       <&rpmhcc RPMH_CXO_CLK_A>,
+			       <&lpass_core LPASS_CORE_CC_CORE_CLK>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
+		};
+
+		lpass_core: clock-controller@3900000 {
+			compatible = "qcom,sc7280-lpasscorecc";
+			reg = <0 0x03900000 0 0x50000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
+		};
+
+		lpass_cpu: audio@3987000 {
+			compatible = "qcom,sc7280-lpass-cpu";
+
+			reg = <0 0x03987000 0 0x68000>,
+			      <0 0x03b00000 0 0x29000>,
+			      <0 0x03260000 0 0xc000>,
+			      <0 0x03280000 0 0x29000>,
+			      <0 0x03340000 0 0x29000>,
+			      <0 0x0336c000 0 0x3000>;
+			reg-names = "lpass-hdmiif",
+				    "lpass-lpaif",
+				    "lpass-rxtx-cdc-dma-lpm",
+				    "lpass-rxtx-lpaif",
+				    "lpass-va-lpaif",
+				    "lpass-va-cdc-dma-lpm";
+
+			iommus = <&apps_smmu 0x1820 0>,
+				 <&apps_smmu 0x1821 0>,
+				 <&apps_smmu 0x1832 0>;
+
+			power-domains = <&rpmhpd SC7280_LCX>;
+			power-domain-names = "lcx";
+			required-opps = <&rpmhpd_opp_nom>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
+				 <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>,
+				 <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
+				 <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
+				 <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
+				 <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
+			clock-names = "aon_cc_audio_hm_h",
+				      "audio_cc_ext_mclk0",
+				      "core_cc_sysnoc_mport_core",
+				      "core_cc_ext_if0_ibit",
+				      "core_cc_ext_if1_ibit",
+				      "audio_cc_codec_mem",
+				      "audio_cc_codec_mem0",
+				      "audio_cc_codec_mem1",
+				      "audio_cc_codec_mem2",
+				      "aon_cc_va_mem0";
+
+			#sound-dai-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif",
+					  "lpass-irq-hdmi",
+					  "lpass-irq-vaif",
+					  "lpass-irq-rxtxif";
+
+			status = "disabled";
+		};
+
+		lpass_hm: clock-controller@3c00000 {
+			compatible = "qcom,sc7280-lpasshm";
+			reg = <0 0x03c00000 0 0x28>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			reg = <0 0x03c40000 0 0xf080>;
+			compatible = "qcom,sc7280-lpass-ag-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+			reg = <0 0x033c0000 0x0 0x20000>,
+				<0 0x03550000 0x0 0x10000>;
+			qcom,adsp-bypass-mode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 15>;
+
+			lpass_dmic01_clk: dmic01-clk-state {
+				pins = "gpio6";
+				function = "dmic1_clk";
+			};
+
+			lpass_dmic01_data: dmic01-data-state {
+				pins = "gpio7";
+				function = "dmic1_data";
+			};
+
+			lpass_dmic23_clk: dmic23-clk-state {
+				pins = "gpio8";
+				function = "dmic2_clk";
+			};
+
+			lpass_dmic23_data: dmic23-data-state {
+				pins = "gpio9";
+				function = "dmic2_data";
+			};
+
+			lpass_rx_swr_clk: rx-swr-clk-state {
+				pins = "gpio3";
+				function = "swr_rx_clk";
+			};
+
+			lpass_rx_swr_data: rx-swr-data-state {
+				pins = "gpio4", "gpio5";
+				function = "swr_rx_data";
+			};
+
+			lpass_tx_swr_clk: tx-swr-clk-state {
+				pins = "gpio0";
+				function = "swr_tx_clk";
+			};
+
+			lpass_tx_swr_data: tx-swr-data-state {
+				pins = "gpio1", "gpio2", "gpio14";
+				function = "swr_tx_data";
+			};
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-635.0", "qcom,adreno";
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1804000>;
+					opp-supported-hw = <0x03>;
+				};
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <4068000>;
+					opp-supported-hw = <0x03>;
+				};
+
+				/* Only applicable for SKUs which has 550Mhz as Fmax */
+				opp-550000000-0 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <8368000>;
+					opp-supported-hw = <0x01>;
+				};
+
+				opp-550000000-1 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <6832000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-608000000 {
+					opp-hz = /bits/ 64 <608000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <8368000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-700000000 {
+					opp-hz = /bits/ 64 <700000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-812000000 {
+					opp-hz = /bits/ 64 <812000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-840000000 {
+					opp-hz = /bits/ 64 <840000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-900000000 {
+					opp-hz = /bits/ 64 <900000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x02>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x34000>,
+				<0 0x3de0000 0 0x10000>,
+				<0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&adreno_smmu 5 0x400>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sc7280-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dma@117f000 {
+			compatible = "qcom,sc7280-dcc", "qcom,dcc";
+			reg = <0x0 0x0117f000 0x0 0x1000>,
+			      <0x0 0x01112000 0x0 0x6000>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+					"gcc_gpu_snoc_dvm_gfx_clk",
+					"gpu_cc_ahb_clk",
+					"gpu_cc_hlos1_vote_gpu_smmu_clk",
+					"gpu_cc_cx_gmu_clk",
+					"gpu_cc_hub_cx_int_clk",
+					"gpu_cc_hub_aon_clk";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sc7280-mpss-pas";
+			reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint = <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&swao_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&swao_replicator_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x04c0 0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06b04000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					swao_funnel_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@6b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b05000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&swao_replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&swao_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b06000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
+
+			out-ports {
+				port {
+					swao_replicator_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint = <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint = <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
+			pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
+			status = "disabled";
+
+			reg = <0 0x08804000 0 0x1000>;
+
+			iommus = <&apps_smmu 0x100 0x0>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd SC7280_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			bus-width = <4>;
+			dma-coherent;
+
+			qcom,dll-config = <0x0007642c>;
+
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 400000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <200000 0>;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sc7280-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_2_hsphy: phy@88e4000 {
+			compatible = "qcom,sc7280-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e4000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy-wrapper@88e9000 {
+			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
+				     "qcom,sm8250-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x200>,
+			      <0 0x088e8000 0 0x40>,
+			      <0 0x088ea000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x400>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#phy-cells = <0>;
+				#clock-cells = <1>;
+			};
+		};
+
+		usb_2: usb@8cf8800 {
+			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
+			reg = <0 0x08cf8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@8c00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x08c00000 0 0xe000>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0xa0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				usb-role-switch;
+
+				port {
+					usb2_role_switch: endpoint {
+						remote-endpoint = <&eud_ep>;
+					};
+				};
+			};
+		};
+
+		qspi: spi@88dc000 {
+			compatible = "qcom,sc7280-qspi", "qcom,qspi-v1";
+			reg = <0 0x088dc000 0 0x1000>;
+			iommus = <&apps_smmu 0x20 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0
+					&cnoc2 SLAVE_QSPI_0 0>;
+			interconnect-names = "qspi-config";
+			power-domains = <&rpmhpd SC7280_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
+			status = "disabled";
+		};
+
+		remoteproc_wpss: remoteproc@8a00000 {
+			compatible = "qcom,sc7280-wpss-pil";
+			reg = <0 0x08a00000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+				 <&gcc GCC_WPSS_AHB_CLK>,
+				 <&gcc GCC_WPSS_RSCP_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ahb_bdg", "ahb",
+				      "rscp", "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MX>;
+			power-domain-names = "cx", "mx";
+
+			memory-region = <&wpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&wpss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+			reset-names = "restart", "pdc_sync";
+
+			qcom,halt-regs = <&tcsr_1 0x17000>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_WPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "wpss";
+				qcom,remote-pid = <13>;
+			};
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x09091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <1804000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <2188000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <3072000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <4068000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <6220000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <6832000>;
+				};
+				opp-7 {
+					opp-peak-kBps = <8532000>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x090b6400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2400000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <4800000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <7456000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <9600000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <12896000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <14928000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <17056000>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@90e0000 {
+			reg = <0 0x090e0000 0 0x5080>;
+			compatible = "qcom,sc7280-dc-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			reg = <0 0x09100000 0 0xe2200>;
+			compatible = "qcom,sc7280-gem-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc7280-llcc";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		eud: eud@88e0000 {
+			compatible = "qcom,sc7280-eud", "qcom,eud";
+			reg = <0 0x88e0000 0 0x2000>,
+			      <0 0x88e2000 0 0x1000>;
+			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					eud_ep: endpoint {
+						remote-endpoint = <&usb2_role_switch>;
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@a0c0000 {
+			reg = <0 0x0a0c0000 0 0x10000>;
+			compatible = "qcom,sc7280-nsp-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xe000>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0xe0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				maximum-speed = "super-speed";
+			};
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sc7280-venus";
+			reg = <0 0x0aa00000 0 0xd0600>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
+				 <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CORE_CLK>,
+				 <&videocc VIDEO_CC_MVS0_AXI_CLK>;
+			clock-names = "core", "bus", "iface",
+				      "vcodec_core", "vcodec_bus";
+
+			power-domains = <&videocc MVSC_GDSC>,
+					<&videocc MVS0_GDSC>,
+					<&rpmhpd SC7280_CX>;
+			power-domain-names = "venus", "vcodec0", "cx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
+					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "cpu-cfg", "video-mem";
+
+			iommus = <&apps_smmu 0x2180 0x20>,
+				 <&apps_smmu 0x2184 0x20>;
+			memory-region = <&video_mem>;
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+
+			video-firmware {
+				iommus = <&apps_smmu 0x21a2 0x0>;
+			};
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133330000 {
+					opp-hz = /bits/ 64 <133330000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-335000000 {
+					opp-hz = /bits/ 64 <335000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-424000000 {
+					opp-hz = /bits/ 64 <424000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-460000048 {
+					opp-hz = /bits/ 64 <460000048>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sc7280-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				<&rpmhcc RPMH_CXO_CLK_A>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc7280-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				<&rpmhcc RPMH_CXO_CLK_A>,
+				<&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sc7280-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&mdss_dsi_phy 0>,
+				 <&mdss_dsi_phy 1>,
+				 <&dp_phy 0>,
+				 <&dp_phy 1>,
+				 <&mdss_edp_phy 0>,
+				 <&mdss_edp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk",
+				      "edp_phy_pll_link_clk",
+				      "edp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sc7280-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				<&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem";
+
+			iommus = <&apps_smmu 0x900 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sc7280-dpu";
+				reg = <0 0x0ae01000 0 0x8f030>,
+					<0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					<&gcc GCC_DISP_SF_AXI_CLK>,
+					<&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_CLK>,
+					<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+						<&dispcc DISP_CC_MDSS_AHB_CLK>;
+				assigned-clock-rates = <19200000>,
+							<19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf5_out: endpoint {
+							remote-endpoint = <&edp_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-380000000 {
+						opp-hz = /bits/ 64 <380000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-506666667 {
+						opp-hz = /bits/ 64 <506666667>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi: dsi@ae94000 {
+				compatible = "qcom,sc7280-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				phys = <&mdss_dsi_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi_phy: phy@ae94400 {
+				compatible = "qcom,sc7280-dsi-phy-7nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x280>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_edp: edp@aea0000 {
+				compatible = "qcom,sc7280-edp";
+				pinctrl-names = "default";
+				pinctrl-0 = <&edp_hot_plug_det>;
+
+				reg = <0 0x0aea0000 0 0x200>,
+				      <0 0x0aea0200 0 0x200>,
+				      <0 0x0aea0400 0 0xc00>,
+				      <0 0x0aea1000 0 0x400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <14>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+				phys = <&mdss_edp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&edp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						edp_in: endpoint {
+							remote-endpoint = <&dpu_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_edp_out: endpoint { };
+					};
+				};
+
+				edp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_edp_phy: phy@aec2a00 {
+				compatible = "qcom,sc7280-edp-phy";
+
+				reg = <0 0x0aec2a00 0 0x19c>,
+				      <0 0x0aec2200 0 0xa0>,
+				      <0 0x0aec2600 0 0xa0>,
+				      <0 0x0aec2000 0 0x1c0>;
+
+				clocks = <&rpmhcc RPMH_CXO_CLK>,
+					 <&gcc GCC_EDP_CLKREF_EN>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sc7280-dp";
+
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0xc00>,
+				      <0 0x0ae91000 0 0x400>,
+				      <0 0x0ae91400 0 0x400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+						"core_aux",
+						"ctrl_link",
+						"ctrl_link_iface",
+						"stream_pixel";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc7280-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,
+					  <55 306 4>, <59 312 3>, <62 374 2>,
+					  <64 434 2>, <66 438 3>, <69 86 1>,
+					  <70 520 54>, <124 609 31>, <155 63 1>,
+					  <156 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		pdc_reset: reset-controller@b5e0000 {
+			compatible = "qcom,sc7280-pdc-global";
+			reg = <0 0x0b5e0000 0 0x20000>;
+			#reset-cells = <1>;
+			status = "reserved"; /* Owned by firmware */
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+				<0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+				<0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <12>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_reset: reset-controller@c2a0000 {
+			compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc";
+			reg = <0 0x0c2a0000 0 0x31000>;
+			#reset-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+						     IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP
+					IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sc7280-pinctrl";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 175>;
+			wakeup-parent = <&pdc>;
+
+			dp_hot_plug_det: dp-hot-plug-det-state {
+				pins = "gpio47";
+				function = "dp_hot";
+			};
+
+			edp_hot_plug_det: edp-hot-plug-det-state {
+				pins = "gpio60";
+				function = "edp_hot";
+			};
+
+			mi2s0_data0: mi2s0-data0-state {
+				pins = "gpio98";
+				function = "mi2s0_data0";
+			};
+
+			mi2s0_data1: mi2s0-data1-state {
+				pins = "gpio99";
+				function = "mi2s0_data1";
+			};
+
+			mi2s0_mclk: mi2s0-mclk-state {
+				pins = "gpio96";
+				function = "pri_mi2s";
+			};
+
+			mi2s0_sclk: mi2s0-sclk-state {
+				pins = "gpio97";
+				function = "mi2s0_sck";
+			};
+
+			mi2s0_ws: mi2s0-ws-state {
+				pins = "gpio100";
+				function = "mi2s0_ws";
+			};
+
+			mi2s1_data0: mi2s1-data0-state {
+				pins = "gpio107";
+				function = "mi2s1_data0";
+			};
+
+			mi2s1_sclk: mi2s1-sclk-state {
+				pins = "gpio106";
+				function = "mi2s1_sck";
+			};
+
+			mi2s1_ws: mi2s1-ws-state {
+				pins = "gpio108";
+				function = "mi2s1_ws";
+			};
+
+			pcie1_clkreq_n: pcie1-clkreq-n-state {
+				pins = "gpio79";
+				function = "pcie1_clkreqn";
+			};
+
+			qspi_clk: qspi-clk-state {
+				pins = "gpio14";
+				function = "qspi_clk";
+			};
+
+			qspi_cs0: qspi-cs0-state {
+				pins = "gpio15";
+				function = "qspi_cs";
+			};
+
+			qspi_cs1: qspi-cs1-state {
+				pins = "gpio19";
+				function = "qspi_cs";
+			};
+
+			qspi_data0: qspi-data0-state {
+				pins = "gpio12";
+				function = "qspi_data";
+			};
+
+			qspi_data1: qspi-data1-state {
+				pins = "gpio13";
+				function = "qspi_data";
+			};
+
+			qspi_data23: qspi-data23-state {
+				pins = "gpio16", "gpio17";
+				function = "qspi_data";
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio4", "gpio5";
+				function = "qup01";
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio8", "gpio9";
+				function = "qup02";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio12", "gpio13";
+				function = "qup03";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio20", "gpio21";
+				function = "qup05";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio24", "gpio25";
+				function = "qup06";
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				pins = "gpio28", "gpio29";
+				function = "qup07";
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				pins = "gpio32", "gpio33";
+				function = "qup10";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				pins = "gpio36", "gpio37";
+				function = "qup11";
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				pins = "gpio40", "gpio41";
+				function = "qup12";
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				pins = "gpio44", "gpio45";
+				function = "qup13";
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				pins = "gpio48", "gpio49";
+				function = "qup14";
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				pins = "gpio52", "gpio53";
+				function = "qup15";
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				pins = "gpio56", "gpio57";
+				function = "qup16";
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				pins = "gpio60", "gpio61";
+				function = "qup17";
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup00";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup00";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup01";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup01";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio7";
+				function = "gpio";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup02";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup02";
+			};
+
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+				pins = "gpio11";
+				function = "gpio";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup03";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup03";
+			};
+
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio15";
+				function = "gpio";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup04";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup04";
+			};
+
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+				pins = "gpio19";
+				function = "gpio";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup05";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio23";
+				function = "qup05";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio23";
+				function = "gpio";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup06";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio27";
+				function = "qup06";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio27";
+				function = "gpio";
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				pins = "gpio28", "gpio29", "gpio30";
+				function = "qup07";
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio31";
+				function = "qup07";
+			};
+
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
+				pins = "gpio31";
+				function = "gpio";
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup10";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio35";
+				function = "qup10";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio35";
+				function = "gpio";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup11";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio39";
+				function = "qup11";
+			};
+
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
+				pins = "gpio39";
+				function = "gpio";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup12";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio43";
+				function = "qup12";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio43";
+				function = "gpio";
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup13";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio47";
+				function = "qup13";
+			};
+
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+				pins = "gpio47";
+				function = "gpio";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup14";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio51";
+				function = "qup14";
+			};
+
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
+				pins = "gpio51";
+				function = "gpio";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup15";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio55";
+				function = "qup15";
+			};
+
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
+				pins = "gpio55";
+				function = "gpio";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup16";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio59";
+				function = "qup16";
+			};
+
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
+				pins = "gpio59";
+				function = "gpio";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup17";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio63";
+				function = "qup17";
+			};
+
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
+				pins = "gpio63";
+				function = "gpio";
+			};
+
+			qup_uart0_cts: qup-uart0-cts-state {
+				pins = "gpio0";
+				function = "qup00";
+			};
+
+			qup_uart0_rts: qup-uart0-rts-state {
+				pins = "gpio1";
+				function = "qup00";
+			};
+
+			qup_uart0_tx: qup-uart0-tx-state {
+				pins = "gpio2";
+				function = "qup00";
+			};
+
+			qup_uart0_rx: qup-uart0-rx-state {
+				pins = "gpio3";
+				function = "qup00";
+			};
+
+			qup_uart1_cts: qup-uart1-cts-state {
+				pins = "gpio4";
+				function = "qup01";
+			};
+
+			qup_uart1_rts: qup-uart1-rts-state {
+				pins = "gpio5";
+				function = "qup01";
+			};
+
+			qup_uart1_tx: qup-uart1-tx-state {
+				pins = "gpio6";
+				function = "qup01";
+			};
+
+			qup_uart1_rx: qup-uart1-rx-state {
+				pins = "gpio7";
+				function = "qup01";
+			};
+
+			qup_uart2_cts: qup-uart2-cts-state {
+				pins = "gpio8";
+				function = "qup02";
+			};
+
+			qup_uart2_rts: qup-uart2-rts-state {
+				pins = "gpio9";
+				function = "qup02";
+			};
+
+			qup_uart2_tx: qup-uart2-tx-state {
+				pins = "gpio10";
+				function = "qup02";
+			};
+
+			qup_uart2_rx: qup-uart2-rx-state {
+				pins = "gpio11";
+				function = "qup02";
+			};
+
+			qup_uart3_cts: qup-uart3-cts-state {
+				pins = "gpio12";
+				function = "qup03";
+			};
+
+			qup_uart3_rts: qup-uart3-rts-state {
+				pins = "gpio13";
+				function = "qup03";
+			};
+
+			qup_uart3_tx: qup-uart3-tx-state {
+				pins = "gpio14";
+				function = "qup03";
+			};
+
+			qup_uart3_rx: qup-uart3-rx-state {
+				pins = "gpio15";
+				function = "qup03";
+			};
+
+			qup_uart4_cts: qup-uart4-cts-state {
+				pins = "gpio16";
+				function = "qup04";
+			};
+
+			qup_uart4_rts: qup-uart4-rts-state {
+				pins = "gpio17";
+				function = "qup04";
+			};
+
+			qup_uart4_tx: qup-uart4-tx-state {
+				pins = "gpio18";
+				function = "qup04";
+			};
+
+			qup_uart4_rx: qup-uart4-rx-state {
+				pins = "gpio19";
+				function = "qup04";
+			};
+
+			qup_uart5_cts: qup-uart5-cts-state {
+				pins = "gpio20";
+				function = "qup05";
+			};
+
+			qup_uart5_rts: qup-uart5-rts-state {
+				pins = "gpio21";
+				function = "qup05";
+			};
+
+			qup_uart5_tx: qup-uart5-tx-state {
+				pins = "gpio22";
+				function = "qup05";
+			};
+
+			qup_uart5_rx: qup-uart5-rx-state {
+				pins = "gpio23";
+				function = "qup05";
+			};
+
+			qup_uart6_cts: qup-uart6-cts-state {
+				pins = "gpio24";
+				function = "qup06";
+			};
+
+			qup_uart6_rts: qup-uart6-rts-state {
+				pins = "gpio25";
+				function = "qup06";
+			};
+
+			qup_uart6_tx: qup-uart6-tx-state {
+				pins = "gpio26";
+				function = "qup06";
+			};
+
+			qup_uart6_rx: qup-uart6-rx-state {
+				pins = "gpio27";
+				function = "qup06";
+			};
+
+			qup_uart7_cts: qup-uart7-cts-state {
+				pins = "gpio28";
+				function = "qup07";
+			};
+
+			qup_uart7_rts: qup-uart7-rts-state {
+				pins = "gpio29";
+				function = "qup07";
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio30";
+				function = "qup07";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio31";
+				function = "qup07";
+			};
+
+			qup_uart8_cts: qup-uart8-cts-state {
+				pins = "gpio32";
+				function = "qup10";
+			};
+
+			qup_uart8_rts: qup-uart8-rts-state {
+				pins = "gpio33";
+				function = "qup10";
+			};
+
+			qup_uart8_tx: qup-uart8-tx-state {
+				pins = "gpio34";
+				function = "qup10";
+			};
+
+			qup_uart8_rx: qup-uart8-rx-state {
+				pins = "gpio35";
+				function = "qup10";
+			};
+
+			qup_uart9_cts: qup-uart9-cts-state {
+				pins = "gpio36";
+				function = "qup11";
+			};
+
+			qup_uart9_rts: qup-uart9-rts-state {
+				pins = "gpio37";
+				function = "qup11";
+			};
+
+			qup_uart9_tx: qup-uart9-tx-state {
+				pins = "gpio38";
+				function = "qup11";
+			};
+
+			qup_uart9_rx: qup-uart9-rx-state {
+				pins = "gpio39";
+				function = "qup11";
+			};
+
+			qup_uart10_cts: qup-uart10-cts-state {
+				pins = "gpio40";
+				function = "qup12";
+			};
+
+			qup_uart10_rts: qup-uart10-rts-state {
+				pins = "gpio41";
+				function = "qup12";
+			};
+
+			qup_uart10_tx: qup-uart10-tx-state {
+				pins = "gpio42";
+				function = "qup12";
+			};
+
+			qup_uart10_rx: qup-uart10-rx-state {
+				pins = "gpio43";
+				function = "qup12";
+			};
+
+			qup_uart11_cts: qup-uart11-cts-state {
+				pins = "gpio44";
+				function = "qup13";
+			};
+
+			qup_uart11_rts: qup-uart11-rts-state {
+				pins = "gpio45";
+				function = "qup13";
+			};
+
+			qup_uart11_tx: qup-uart11-tx-state {
+				pins = "gpio46";
+				function = "qup13";
+			};
+
+			qup_uart11_rx: qup-uart11-rx-state {
+				pins = "gpio47";
+				function = "qup13";
+			};
+
+			qup_uart12_cts: qup-uart12-cts-state {
+				pins = "gpio48";
+				function = "qup14";
+			};
+
+			qup_uart12_rts: qup-uart12-rts-state {
+				pins = "gpio49";
+				function = "qup14";
+			};
+
+			qup_uart12_tx: qup-uart12-tx-state {
+				pins = "gpio50";
+				function = "qup14";
+			};
+
+			qup_uart12_rx: qup-uart12-rx-state {
+				pins = "gpio51";
+				function = "qup14";
+			};
+
+			qup_uart13_cts: qup-uart13-cts-state {
+				pins = "gpio52";
+				function = "qup15";
+			};
+
+			qup_uart13_rts: qup-uart13-rts-state {
+				pins = "gpio53";
+				function = "qup15";
+			};
+
+			qup_uart13_tx: qup-uart13-tx-state {
+				pins = "gpio54";
+				function = "qup15";
+			};
+
+			qup_uart13_rx: qup-uart13-rx-state {
+				pins = "gpio55";
+				function = "qup15";
+			};
+
+			qup_uart14_cts: qup-uart14-cts-state {
+				pins = "gpio56";
+				function = "qup16";
+			};
+
+			qup_uart14_rts: qup-uart14-rts-state {
+				pins = "gpio57";
+				function = "qup16";
+			};
+
+			qup_uart14_tx: qup-uart14-tx-state {
+				pins = "gpio58";
+				function = "qup16";
+			};
+
+			qup_uart14_rx: qup-uart14-rx-state {
+				pins = "gpio59";
+				function = "qup16";
+			};
+
+			qup_uart15_cts: qup-uart15-cts-state {
+				pins = "gpio60";
+				function = "qup17";
+			};
+
+			qup_uart15_rts: qup-uart15-rts-state {
+				pins = "gpio61";
+				function = "qup17";
+			};
+
+			qup_uart15_tx: qup-uart15-tx-state {
+				pins = "gpio62";
+				function = "qup17";
+			};
+
+			qup_uart15_rx: qup-uart15-rx-state {
+				pins = "gpio63";
+				function = "qup17";
+			};
+
+			sdc1_clk: sdc1-clk-state {
+				pins = "sdc1_clk";
+			};
+
+			sdc1_cmd: sdc1-cmd-state {
+				pins = "sdc1_cmd";
+			};
+
+			sdc1_data: sdc1-data-state {
+				pins = "sdc1_data";
+			};
+
+			sdc1_rclk: sdc1-rclk-state {
+				pins = "sdc1_rclk";
+			};
+
+			sdc1_clk_sleep: sdc1-clk-sleep-state {
+				pins = "sdc1_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc1_cmd_sleep: sdc1-cmd-sleep-state {
+				pins = "sdc1_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc1_data_sleep: sdc1-data-sleep-state {
+				pins = "sdc1_data";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc1_rclk_sleep: sdc1-rclk-sleep-state {
+				pins = "sdc1_rclk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_clk: sdc2-clk-state {
+				pins = "sdc2_clk";
+			};
+
+			sdc2_cmd: sdc2-cmd-state {
+				pins = "sdc2_cmd";
+			};
+
+			sdc2_data: sdc2-data-state {
+				pins = "sdc2_data";
+			};
+
+			sdc2_clk_sleep: sdc2-clk-sleep-state {
+				pins = "sdc2_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_cmd_sleep: sdc2-cmd-sleep-state {
+				pins = "sdc2_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_data_sleep: sdc2-data-sleep-state {
+				pins = "sdc2_data";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+		};
+
+		sram@146a5000 {
+			compatible = "qcom,sc7280-imem", "syscon", "simple-mfd";
+			reg = <0 0x146a5000 0 0x6000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x146a5000 0x6000>;
+
+			pil-reloc@594c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x594c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc7280-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			dma-coherent;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17a40000 0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		watchdog: watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+			status = "reserved"; /* Owned by Gunyah hyp */
+		};
+
+		timer@17c20000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17c20000 0 0x1000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x18200000 0 0x10000>,
+			      <0 0x18210000 0 0x10000>,
+			      <0 0x18220000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc7280-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_low_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_turbo: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc7280-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+		};
+
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sc7280-epss-l3", "qcom,epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu8-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu8_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu8_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu8_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu9-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu9_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu9_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu9_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu10-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu10_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu10_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu10_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu10_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu10_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu11-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu11_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu11_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu11_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu11_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu11_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0_crit: aoss0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss1_crit: aoss1-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss0_crit: cluster0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss1_crit: cluster0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_crit: gpuss0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_crit: gpuss1-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		nspss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				nspss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nspss0_crit: nspss0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nspss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				nspss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nspss1_crit: nspss1-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				ddr_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				ddr_crit: ddr-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mdmss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdmss0_crit: mdmss0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				mdmss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdmss1_crit: mdmss1-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				mdmss2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdmss2_crit: mdmss2-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				mdmss3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdmss3_crit: mdmss3-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				camera0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera0_crit: camera0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
new file mode 100644
index 0000000000..abc66613cc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -0,0 +1,774 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc8180x.dtsi"
+#include "sc8180x-pmics.dtsi"
+
+/ {
+	model = "Lenovo Flex 5G";
+	compatible = "lenovo,flex-5g", "qcom,sc8180x";
+
+	aliases {
+		serial0 = &uart13;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmc8180c_lpg 4 1000000>;
+		enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bl_pwm_default>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_active_state>;
+		pinctrl-names = "default";
+
+		lid-switch {
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_prim_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_prim_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usbprim_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_sec_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_sec_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usbsec_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		rmtfs_mem: rmtfs-region@85500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85500000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		wlan_mem: wlan-region@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x180000>;
+			no-map;
+		};
+
+		mpss_mem: mpss-region@8d800000 {
+			reg = <0x0 0x8d800000 0x0 0x3000000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@90800000 {
+			reg = <0x0 0x90800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		gpu_mem: gpu-region@98715000 {
+			reg = <0x0 0x98715000 0x0 0x2000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@98900000 {
+			reg = <0x0 0x98900000 0x0 0x1400000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	usbprim-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbprim_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbprim_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usbsec-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbsec_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbsec_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p3: ldo9 {
+			regulator-min-microvolt = <1296000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmc8180c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-l2-l3-supply = <&vreg_s6c_1p35>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s6c_1p35: smps6 {
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1372000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3350000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s4e_0p98: smps4 {
+			regulator-min-microvolt = <992000>;
+			regulator-max-microvolt = <992000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_2p05: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7e_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10e_2p9: ldo10 {
+			regulator-min-microvolt = <2904000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16e_3p0: ldo16 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	hid@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <100000>;
+
+	pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	hid@5 {
+		compatible = "hid-over-i2c";
+		reg = <0x5>;
+		hid-descr-addr = <0x20>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	hid@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_prim_qmpphy_dp_in>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_sec_qmpphy_dp_in>;
+};
+
+&mdss_edp {
+	data-lanes = <0 1 2 3>;
+
+	pinctrl-0 = <&edp_hpd_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			no-hpd;
+
+			backlight = <&backlight>;
+
+			port {
+				auo_b140han06_in: endpoint {
+					remote-endpoint = <&mdss_edp_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_edp_out: endpoint {
+				remote-endpoint = <&auo_b140han06_in>;
+			};
+		};
+	};
+};
+
+&pcie3 {
+	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&pcie3_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&pmc8180c_lpg {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc8180x/LENOVO/82AK/qcadsp8180.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	memory-region = <&cdsp_mem>;
+	firmware-name = "qcom/sc8180x/LENOVO/82AK/qccdsp8180.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_mem>;
+	firmware-name = "qcom/sc8180x/LENOVO/82AK/qcmpss8180_nm.mbn";
+
+	status = "okay";
+};
+
+&uart13 {
+	pinctrl-0 = <&uart13_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3998-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l9a_1p3>;
+		vddch0-supply = <&vreg_l11c_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10e_2p9>;
+	vcc-max-microamp = <155000>;
+
+	vccq2-supply = <&vreg_l7e_1p8>;
+	vccq2-max-microamp = <425000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&usb_prim_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_prim_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_prim {
+	status = "okay";
+};
+
+&usb_prim_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_prim_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_prim_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_prim_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_sec_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_sec_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_sec_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp1_out>;
+};
+
+&usb_sec_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_sec_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_sec {
+	status = "okay";
+};
+
+&usb_sec_dwc3 {
+	dr_mode = "host";
+};
+
+&wifi {
+	memory-region = <&wlan_mem>;
+
+	vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&pmc8180c_gpios {
+	bl_pwm_default: bl-pwm-default-state {
+		en-pins {
+			pins = "gpio8";
+			function = "normal";
+		};
+
+		pwm-pins {
+			pins = "gpio10";
+			function = "func1";
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
+
+	edp_hpd_active: epd-hpd-active-state {
+		pins = "gpio10";
+		function = "edp_hot";
+	};
+
+	hall_int_active_state: hall-int-active-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	i2c1_active: i2c1-active-state {
+		pins = "gpio114", "gpio115";
+		function = "qup1";
+
+		bias-pull-up = <1>;
+		drive-strength = <2>;
+	};
+
+	i2c1_hid_active: i2c1-hid-active-state {
+		pins = "gpio122";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c7_active: i2c7-active-state {
+		pins = "gpio98", "gpio99";
+		function = "qup7";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c7_hid_active: i2c7-hid-active-state {
+		pins = "gpio37", "gpio24";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	pcie3_default_state: pcie3-default-state {
+		clkreq-pins {
+			pins = "gpio179";
+			function = "pci_e3";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio180";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usbprim_sbu_default: usbprim-sbu-state {
+		oe-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio100";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usbsec_sbu_default: usbsec-sbu-state {
+		oe-n-pins {
+			pins = "gpio188";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio187";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	uart13_state: uart13-state {
+		cts-pins {
+			pins = "gpio43";
+			function = "qup13";
+			bias-pull-down;
+		};
+
+		rts-tx-pins {
+			pins = "gpio44", "gpio45";
+			function = "qup13";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio46";
+			function = "qup13";
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
new file mode 100644
index 0000000000..ddc84282f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2023, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+/ {
+	thermal-zones {
+		pmc8180-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmc8180_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmc8180c-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmc8180c_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmc8180_0: pmic@0 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+
+				status = "disabled";
+			};
+		};
+
+		pmc8180_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmc8180_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8180_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pmc8180_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
+		pmc8180_gpios: gpio@c000 {
+			compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmc8180_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pmc8180", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@2 {
+		compatible = "qcom,smb2351", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@85 {
+				reg = <0x85>;
+				qcom,pre-scaling = <1 1>;
+				label = "vcoin2";
+			};
+		};
+	};
+
+	pmic@6 {
+		compatible = "qcom,pm8150c", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@8 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@a {
+		compatible = "qcom,smb2351", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@85 {
+				reg = <0x85>;
+				qcom,pre-scaling = <1 1>;
+				label = "vcoin";
+			};
+		};
+	};
+
+	pmic@4 {
+		compatible = "qcom,pm8150c", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pmc8180c_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmc8180c_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8180c_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pmc8180c_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmc8180c_gpios: gpio@c000 {
+			compatible = "qcom,pmc8180c-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmc8180c_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@5 {
+		compatible = "qcom,pmc8180c", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+
+		pmc8180c_lpg: pwm {
+			compatible = "qcom,pmc8180c-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
new file mode 100644
index 0000000000..ae008c3b0a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc8180x.dtsi"
+#include "sc8180x-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SC8180x Primus";
+	compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
+
+	aliases {
+		serial0 = &uart12;
+		serial1 = &uart13;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmc8180c_lpg 4 1000000>;
+		enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwm_default>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_int_active_state>;
+
+		lid-switch {
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_prim_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_prim_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usbprim_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_sec_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_sec_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usbsec_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		rmtfs_mem: rmtfs-region@85500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85500000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		wlan_mem: wlan-region@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x180000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@96e00000 {
+			reg = <0x0 0x96e00000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		mpss_mem: mpss-region@8d800000 {
+			reg = <0x0 0x8d800000 0x0 0x9600000>;
+			no-map;
+		};
+
+		gpu_mem: gpu-region@98a00000 {
+			reg = <0x0 0x98a00000 0x0 0x2000>;
+			no-map;
+		};
+
+		reserved-region@9a500000 {
+			reg = <0x0 0x9a500000 0x0 0x600000>;
+			no-map;
+		};
+	};
+
+	vreg_nvme_0p9: nvme-0p9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_nvme_0p9";
+
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_nvme_3p3: nvme-3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_nvme_3p3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8180c_gpios 11 0>;
+		enable-active-high;
+
+		regulator-always-on;
+	};
+
+	vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_kb_tp_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-always-on;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&kb_tp_3v3_en_active_state>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	usbprim-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbprim_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbprim_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usbsec-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbsec_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbsec_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p3: ldo9 {
+			regulator-min-microvolt = <1296000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmc8180c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l2-l3-supply = <&vreg_s6c_1p35>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s6c_1p35: smps6 {
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1372000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p8: smps8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_3p3: ldo4 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3350000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s4e_0p98: smps4 {
+			regulator-min-microvolt = <992000>;
+			regulator-max-microvolt = <992000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_2p05: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7e_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10e_2p9: ldo10 {
+			regulator-min-microvolt = <2904000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12e: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16e_3p0: ldo16 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ts_i2c_active_state>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x1>;
+
+		vdd-supply = <&vreg_l4c_3p3>;
+		vddl-supply = <&vreg_l12e>;
+
+		post-power-on-delay-ms = <20>;
+
+		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_active_state>;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&aux_i2c_active_state>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_active_state>;
+
+		vdd-supply = <&vdd_kb_tp_3v3>;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&kb_int_active_state>;
+
+		vdd-supply = <&vdd_kb_tp_3v3>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_prim_qmpphy_dp_in>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_sec_qmpphy_dp_in>;
+};
+
+&mdss_edp {
+	data-lanes = <0 1 2 3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd_active>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+
+			port {
+				auo_b133han05_in: endpoint {
+					remote-endpoint = <&mdss_edp_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_edp_out: endpoint {
+				remote-endpoint = <&auo_b133han05_in>;
+			};
+		};
+	};
+};
+
+&pcie1 {
+	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_default_state>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&pmc8180c_lpg {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc8180x/qcadsp8180.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_mem>;
+	firmware-name = "qcom/sc8180x/qcmpss8180.mbn";
+
+	status = "okay";
+};
+
+&uart12 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&uart13 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart13_state>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3998-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l9a_1p3>;
+		vddch0-supply = <&vreg_l11c_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10e_2p9>;
+	vcc-max-microamp = <155000>;
+
+	vccq2-supply = <&vreg_l7e_1p8>;
+	vccq2-max-microamp = <425000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&usb_prim_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_prim_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_prim {
+	status = "okay";
+};
+
+&usb_prim_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_prim_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_prim_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_prim_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_sec_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_sec_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_sec_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp1_out>;
+};
+
+&usb_sec_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_sec_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_sec {
+	status = "okay";
+};
+
+&usb_sec_dwc3 {
+	dr_mode = "host";
+};
+
+&wifi {
+	memory-region = <&wlan_mem>;
+
+	vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&pmc8180c_gpios {
+	bl_pwm_default: bl-pwm-default-state {
+		en-pins {
+			pins = "gpio8";
+			function = "normal";
+		};
+
+		pwm-pins {
+			pins = "gpio10";
+			function = "func1";
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
+
+	aux_i2c_active_state: aux-i2c-active-state {
+		pins = "gpio98", "gpio99";
+		function = "qup7";
+
+		bias-disable;
+		drive-strength = <16>;
+	};
+
+	edp_hpd_active: epd-hpd-active-state {
+		pins = "gpio10";
+		function = "edp_hot";
+	};
+
+	hall_int_active_state: hall-int-active-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	kb_int_active_state: kb-int-active-state {
+		int-n-pins {
+			pins = "gpio37";
+			function = "gpio";
+
+			bias-pull-up;
+		};
+
+		kp-disable-pins {
+			pins = "gpio135";
+			function = "gpio";
+
+			output-high;
+		};
+	};
+
+	kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state {
+		pins = "gpio4";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	pcie2_default_state: pcie2-default-state {
+		clkreq-pins {
+			pins = "gpio176";
+			function = "pci_e2";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio175";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio177";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usbprim_sbu_default: usbprim-sbu-state {
+		oe-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio100";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usbsec_sbu_default: usbsec-sbu-state {
+		oe-n-pins {
+			pins = "gpio188";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio187";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	tp_int_active_state: tp-int-active-state {
+		tp-int-pins {
+			pins = "gpio24";
+			function = "gpio";
+
+			bias-disable;
+		};
+
+		tp-close-n-pins {
+			pins = "gpio116";
+			function = "gpio";
+
+			bias-disable;
+		};
+	};
+
+	ts_active_state: ts-active-state {
+		int-n-pins {
+			pins = "gpio122";
+			function = "gpio";
+
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio54";
+			function = "gpio";
+
+			output-high;
+		};
+	};
+
+	ts_i2c_active_state: ts-i2c-active-state {
+		pins = "gpio114", "gpio115";
+		function = "qup1";
+
+		/* External pull up */
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	uart13_state: uart13-state {
+		cts-pins {
+			pins = "gpio43";
+			function = "qup13";
+			bias-pull-down;
+		};
+
+		rts-tx-pins {
+			pins = "gpio44", "gpio45";
+			function = "qup13";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio46";
+			function = "qup13";
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
new file mode 100644
index 0000000000..f9e929bfa5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -0,0 +1,4050 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sc8180x.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <355>;
+				exit-latency-us = <909>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <241>;
+				exit-latency-us = <1461>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100a344>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-peak-kBps = <800000 12902400>;
+		};
+
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <800000 12902400>;
+		};
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <800000 15974400>;
+		};
+
+		opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <1804000 22732800>;
+		};
+
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <1804000 22732800>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <2188000 25804800>;
+		};
+
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <2188000 31948800>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <1804000 15974400>;
+		};
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 19660800>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <2188000 22732800>;
+		};
+
+		opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <3072000 25804800>;
+		};
+
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <4068000 43008000>;
+		};
+
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <6220000 43008000>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <6220000 49152000>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <7216000 49152000>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <8368000 49152000>;
+		};
+
+		opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2918400000 {
+			opp-hz = /bits/ 64 <2918400000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2995200000 {
+			opp-hz = /bits/ 64 <2995200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sc8180x", "qcom,scm";
+		};
+	};
+
+	camnoc_virt: interconnect-camnoc-virt {
+		compatible = "qcom,sc8180x-camnoc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sc8180x-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	qup_virt: interconnect-qup-virt {
+		compatible = "qcom,sc8180x-qup-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@85700000 {
+			reg = <0x0 0x85700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: xbl@85d00000 {
+			reg = <0x0 0x85d00000 0x0 0x140000>;
+			no-map;
+		};
+
+		aop_mem: aop@85f00000 {
+			reg = <0x0 0x85f00000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db: cmd-db@85f20000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x85f20000 0x0 0x20000>;
+			no-map;
+		};
+
+		reserved@85f40000 {
+			reg = <0x0 0x85f40000 0x0 0x10000>;
+			no-map;
+		};
+
+		smem_mem: smem@86000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		reserved@86200000 {
+			reg = <0x0 0x86200000 0x0 0x3900000>;
+			no-map;
+		};
+
+		reserved@89b00000 {
+			reg = <0x0 0x89b00000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		reserved@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x1000000>;
+			no-map;
+		};
+
+		reserved@9e400000 {
+			reg = <0x0 0x9e400000 0x0 0x1400000>;
+			no-map;
+		};
+
+		reserved@9f800000 {
+			reg = <0x0 0x9f800000 0x0 0x800000>;
+			no-map;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		modem_smp2p_ipa_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_ipa_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		modem_smp2p_wlan_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc8180x";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x4c3 0>;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00880000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00888000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart5: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart6: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart7: serial@89c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x603 0>;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart10: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart11: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c16: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart16: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_2: geniqup@cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00cc0000 0x0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x7a3 0>;
+			status = "disabled";
+
+			i2c17: i2c@c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart17: serial@c80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c18: i2c@c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart18: serial@c84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c19: i2c@c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@c88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart19: serial@c88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c13: i2c@c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart13: serial@c8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c14: i2c@c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart14: serial@c90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c15: i2c@c94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@c94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart15: serial@c94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sc8180x-config-noc";
+			reg = <0 0x01500000 0 0x7400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sc8180x-system-noc";
+			reg = <0 0x01620000 0 0x19400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc8180x-aggre1-noc";
+			reg = <0 0x016e0000 0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sc8180x-aggre2-noc";
+			reg = <0 0x01700000 0 0x20000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@1720000 {
+			compatible = "qcom,sc8180x-compute-noc";
+			reg = <0 0x01720000 0 0x7000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sc8180x-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sc8180x";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommus = <&apps_smmu 0x1d80 0x7f>;
+			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
+				    <0x100 &apps_smmu 0x1d81 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sc8180x-qmp-pcie-phy";
+			reg = <0 0x01c06000 0 0x1000>;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
+		pcie3: pci@1c08000 {
+			compatible = "qcom,pcie-sc8180x";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_3_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3_AUX_CLK>,
+				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommus = <&apps_smmu 0x1e00 0x7f>;
+			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
+				    <0x100 &apps_smmu 0x1e01 0x1>;
+
+			resets = <&gcc GCC_PCIE_3_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3_GDSC>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie3_phy: phy@1c0c000 {
+			compatible = "qcom,sc8180x-qmp-pcie-phy";
+			reg = <0 0x01c0c000 0 0x1000>;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_3_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3_pipe_clk";
+
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_3_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE3_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c10000 {
+			compatible = "qcom,pcie-sc8180x";
+			reg = <0 0x01c10000 0 0x3000>,
+			      <0 0x68000000 0 0xf1d>,
+			      <0 0x68000f20 0 0xa8>,
+			      <0 0x68001000 0 0x1000>,
+			      <0 0x68100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommus = <&apps_smmu 0x1c80 0x7f>;
+			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c16000 {
+			compatible = "qcom,sc8180x-qmp-pcie-phy";
+			reg = <0 0x01c16000 0 0x1000>;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
+		pcie2: pci@1c18000 {
+			compatible = "qcom,pcie-sc8180x";
+			reg = <0 0x01c18000 0 0x3000>,
+			      <0 0x70000000 0 0xf1d>,
+			      <0 0x70000f20 0 0xa8>,
+			      <0 0x70001000 0 0x1000>,
+			      <0 0x70100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <4>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2_AUX_CLK>,
+				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommus = <&apps_smmu 0x1d00 0x7f>;
+			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
+				    <0x100 &apps_smmu 0x1d01 0x1>;
+
+			resets = <&gcc GCC_PCIE_2_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2_GDSC>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			phys = <&pcie2_phy>;
+			phy-names = "pciephy";
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie2_phy: phy@1c1c000 {
+			compatible = "qcom,sc8180x-qmp-pcie-phy";
+			reg = <0 0x01c1c000 0 0x1000>;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_2_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2_pipe_clk";
+
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sc8180x-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			iommus = <&apps_smmu 0x300 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <37500000 300000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy-wrapper@1d87000 {
+			compatible = "qcom,sc8180x-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref",
+				      "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ipa_virt: interconnect@1e00000 {
+			compatible = "qcom,sc8180x-ipa-virt";
+			reg = <0 0x01e00000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		gpu: gpu@2c00000 {
+			compatible = "qcom,adreno-680.1", "qcom,adreno";
+			#stream-id-cells = <16>;
+
+			reg = <0 0x02c00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0xc01>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			interconnects = <&gem_noc MASTER_GRAPHICS_3D 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "gfx-mem";
+
+			qcom,gmu = <&gmu>;
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-514000000 {
+					opp-hz = /bits/ 64 <514000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-461000000 {
+					opp-hz = /bits/ 64 <461000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-405000000 {
+					opp-hz = /bits/ 64 <405000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-256000000 {
+					opp-hz = /bits/ 64 <256000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-177000000 {
+					opp-hz = /bits/ 64 <177000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@2c6a000 {
+			compatible = "qcom,adreno-gmu-680.1", "qcom,adreno-gmu";
+
+			reg = <0 0x02c6a000 0 0x30000>,
+			      <0 0x0b290000 0 0x10000>,
+			      <0 0x0b490000 0 0x10000>;
+			reg-names = "gmu",
+				    "gmu_pdc",
+				    "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0xc00>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@2c90000 {
+			compatible = "qcom,sc8180x-gpucc";
+			reg = <0 0x02c90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@2ca0000 {
+			compatible = "qcom,sc8180x-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x02ca0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,sc8180x-tlmm";
+			reg = <0 0x03100000 0 0x300000>,
+			      <0 0x03500000 0 0x700000>,
+			      <0 0x03d00000 0 0x300000>;
+			reg-names = "west", "east", "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 191>;
+			wakeup-parent = <&pdc>;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sc8180x-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8180X_CX>,
+					<&rpmhpd SC8180X_MSS>;
+			power-domain-names = "cx", "mss";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@8300000 {
+			compatible = "qcom,sc8180x-cdsp-pas";
+			reg = <0x0 0x08300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8180X_CX>;
+			power-domain-names = "cx";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+				mboxes = <&apss_shared 4>;
+			};
+		};
+
+		usb_prim_hsphy: phy@88e2000 {
+			compatible = "qcom,sc8180x-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_sec_hsphy: phy@88e3000 {
+			compatible = "qcom,sc8180x-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_prim_qmpphy: phy@88e9000 {
+			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x38>,
+			      <0 0x088ea000 0 0x40>;
+			reg-names = "reg-base", "dp_com";
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux",
+				      "ref_clk_src",
+				      "ref",
+				      "com_aux";
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_prim_qmpphy_out: endpoint {};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_prim_qmpphy_dp_in: endpoint {};
+				};
+			};
+
+			usb_prim_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_prim_phy_pipe_clk_src";
+			};
+
+			usb_prim_dpphy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb_sec_qmpphy: phy@88ee000 {
+			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
+			reg = <0 0x088ee000 0 0x18c>,
+			      <0 0x088ed000 0 0x10>,
+			      <0 0x088ef000 0 0x40>;
+			reg-names = "reg-base", "dp_com";
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux",
+				      "ref_clk_src",
+				      "ref",
+				      "com_aux";
+			resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_sec_qmpphy_out: endpoint {};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_sec_qmpphy_dp_in: endpoint {};
+				};
+			};
+
+			usb_sec_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088ee200 0 0x200>,
+				      <0 0x088ee400 0 0x200>,
+				      <0 0x088eec00 0 0x218>,
+				      <0 0x088ee600 0 0x200>,
+				      <0 0x088ee800 0 0x200>,
+				      <0 0x088eea00 0 0x100>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_sec_phy_pipe_clk_src";
+			};
+
+			usb_sec_dpphy: dp-phy@88ef200 {
+				reg = <0 0x088ef200 0 0x200>,
+				      <0 0x088ef400 0 0x200>,
+				      <0 0x088efa00 0 0x200>,
+				      <0 0x088ef600 0 0x200>,
+				      <0 0x088ef800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+				clock-output-names = "qmp_dptx1_phy_pll_link_clk",
+						     "qmp_dptx1_phy_pll_vco_div_clk";
+			};
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc8180x-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sc8180x-gem-noc";
+			reg = <0 0x09680000 0 0x58200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_prim: usb@a6f8800 {
+			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "mock_utmi",
+				      "sleep",
+				      "xo";
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			status = "disabled";
+
+			usb_prim_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x140 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_prim_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_sec: usb@a8f8800 {
+			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "mock_utmi",
+				      "sleep",
+				      "xo";
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+			power-domains = <&gcc USB30_SEC_GDSC>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			status = "disabled";
+
+			usb_sec_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x160 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_sec_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		mdss: mdss@ae00000 {
+			compatible = "qcom,sc8180x-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "nrt_bus",
+				      "core";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x800 0x420>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: mdp@ae01000 {
+				compatible = "qcom,sc8180x-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <460000000>,
+						       <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						dpu_intf4_out: endpoint {
+							remote-endpoint = <&dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+						dpu_intf5_out: endpoint {
+							remote-endpoint = <&edp_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: dsi-phy@ae94400 {
+				compatible = "qcom,dsi-phy-7nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: dsi-phy@ae96400 {
+				compatible = "qcom,dsi-phy-7nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sc8180x-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae90a00 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>;
+
+				phys = <&usb_prim_dpphy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp0_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+
+				dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp1: displayport-controller@ae98000 {
+				compatible = "qcom,sc8180x-dp";
+				reg = <0 0xae98000 0 0x200>,
+				      <0 0xae98200 0 0x200>,
+				      <0 0xae98400 0 0x600>,
+				      <0 0xae98a00 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <13>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
+				assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>;
+
+				phys = <&usb_sec_dpphy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp0_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dp1_in: endpoint {
+							remote-endpoint = <&dpu_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp1_out: endpoint {
+						};
+					};
+				};
+
+				dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_edp: displayport-controller@ae9a000 {
+				compatible = "qcom,sc8180x-edp";
+				reg = <0 0xae9a000 0 0x200>,
+				      <0 0xae9a200 0 0x200>,
+				      <0 0xae9a400 0 0x600>,
+				      <0 0xae9aa00 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <14>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					       "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&edp_phy 0>, <&edp_phy 1>;
+
+				phys = <&edp_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&edp_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						edp_in: endpoint {
+							remote-endpoint = <&dpu_intf5_out>;
+						};
+					};
+				};
+
+				edp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		edp_phy: phy@aec2a00 {
+			compatible = "qcom,sc8180x-edp-phy";
+			reg = <0 0x0aec2a00 0 0x1c0>,
+			      <0 0x0aec2200 0 0xa0>,
+			      <0 0x0aec2600 0 0xa0>,
+			      <0 0x0aec2000 0 0x19c>;
+
+			clocks = <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sc8180x-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&usb_prim_dpphy 0>,
+				 <&usb_prim_dpphy 1>,
+				 <&usb_sec_dpphy 0>,
+				 <&usb_sec_dpphy 1>,
+				 <&edp_phy 0>,
+				 <&edp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk",
+				      "dptx1_phy_pll_link_clk",
+				      "dptx1_phy_pll_vco_div_clk",
+				      "edp_phy_pll_link_clk",
+				      "edp_phy_pll_vco_div_clk";
+			power-domains = <&rpmhpd SC8180X_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc8180x-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <9>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-controller@c300000 {
+			compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x100000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+			#power-domain-cells = <1>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x0001100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x0100000>,
+			      <0x0 0x0e700000 0x0 0x00a0000>,
+			      <0x0 0x0c40a000 0x0 0x0026000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc8180x-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>;
+
+		};
+
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,sc8180x-adsp-pas";
+			reg = <0x0 0x17300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8180X_CX>;
+			power-domain-names = "cx";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apss_shared 8>;
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,sc8180x-apss-shared";
+			reg = <0x0 0x17c00000 0x0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c26000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   1>,
+					  <WAKE_TCS    1>,
+					  <CONTROL_TCS 0>;
+			label = "apps_rsc";
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc8180x-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board_clk>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc8180x-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sc8180x-osm-l3", "qcom,osm-l3";
+			reg = <0 0x18321000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		lmh@18350800 {
+			compatible = "qcom,sc8180x-lmh";
+			reg = <0 0x18350800 0 0x400>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU4>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		lmh@18358800 {
+			compatible = "qcom,sc8180x-lmh";
+			reg = <0 0x18358800 0 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU0>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			clock-names = "cxo_ref_clk_pin";
+			clocks = <&rpmhcc RPMH_RF_CLK2>;
+			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x0640 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		compute-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mdm-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
new file mode 100644
index 0000000000..ffc4406422
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SC8280XP CRD";
+	compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp";
+
+	aliases {
+		i2c4 = &i2c4;
+		i2c21 = &i2c21;
+		serial0 = &uart17;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmc8280c_lpg 3 1000000>;
+		enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_BL";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_PWR_WLAN";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_sw_en>;
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l3-l5-supply = <&vreg_s11b>;
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn";
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss0_dp3 {
+	compatible = "qcom,sc8280xp-edp";
+	/delete-property/ #sound-dai-cells;
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			backlight = <&backlight>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss0_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_out: endpoint {
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_default>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts0_default>;
+	};
+};
+
+&i2c21 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c21_default>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpad_default>;
+
+		wakeup-source;
+	};
+
+	keyboard@68 {
+		compatible = "hid-over-i2c";
+		reg = <0x68>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&kybd_default>;
+
+		wakeup-source;
+	};
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pmc8280c_lpg {
+	status = "okay";
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&sdc2 {
+	pinctrl-0 = <&sdc2_default_state>;
+	pinctrl-1 = <&sdc2_sleep_state>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l9c>;
+	vqmmc-supply = <&vreg_l6c>;
+
+	cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7c>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l3d>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l9d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */
+
+&pmc8280_1_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio8";
+		function = "normal";
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio9";
+		function = "normal";
+	};
+
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio2";
+		function = "normal";
+	};
+};
+
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmc8280c_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c4_default: i2c4-default-state {
+		pins = "gpio171", "gpio172";
+		function = "qup4";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c21_default: i2c21-default-state {
+		pins = "gpio81", "gpio82";
+		function = "qup21";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		disable-pins {
+			pins = "gpio102";
+			function = "gpio";
+			output-low;
+		};
+
+		int-n-pins {
+			pins = "gpio104";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-pins {
+			pins = "gpio105";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		card-detect-pins {
+			pins = "gpio131";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	sdc2_sleep_state: sdc2-sleep-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		card-detect-pins {
+			pins = "gpio131";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		int-n-pins {
+			pins = "gpio182";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio175";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio99";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio50";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
new file mode 100644
index 0000000000..f2055899ae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -0,0 +1,1526 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	model = "Lenovo ThinkPad X13s";
+	compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
+
+	aliases {
+		i2c4 = &i2c4;
+		i2c21 = &i2c21;
+		serial1 = &uart2;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmc8280c_lpg 3 1000000>;
+		enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_int_n_default>;
+
+		switch-lid {
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
+		led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3LCD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_sw_en>;
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn";
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss0_dp3 {
+	compatible = "qcom,sc8280xp-edp";
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss0_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_out: endpoint {
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_default>;
+
+	status = "okay";
+
+	/* FIXME: verify */
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts0_default>;
+	};
+};
+
+&i2c21 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c21_default>, <&tpad_default>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		wakeup-source;
+	};
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		wakeup-source;
+	};
+
+	keyboard@68 {
+		compatible = "hid-over-i2c";
+		reg = <0x68>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&kybd_default>;
+
+		wakeup-source;
+	};
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+
+	pcie@0 {
+		device_type = "pci";
+		reg = <0x0 0x0 0x0 0x0 0x0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		bus-range = <0x01 0xff>;
+
+		wifi@0 {
+			compatible = "pci17cb,1103";
+			reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+			qcom,ath11k-calibration-variant = "LE_X13S";
+		};
+	};
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pmc8280c_lpg {
+	status = "okay";
+};
+
+&pmk8280_adc_tm {
+	status = "okay";
+
+	sys-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_pon_resin {
+	status = "okay";
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&pmk8280_vadc {
+	status = "okay";
+
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_die_temp";
+	};
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@103 {
+		reg = <PM8350_ADC7_DIE_TEMP(1)>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_1_die_temp";
+	};
+
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm1";
+	};
+
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm2";
+	};
+
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm3";
+	};
+
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm4";
+	};
+
+	channel@303 {
+		reg = <PM8350_ADC7_DIE_TEMP(3)>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_2_die_temp";
+	};
+
+	channel@344 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm5";
+	};
+
+	channel@345 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm6";
+	};
+
+	channel@346 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm7";
+	};
+
+	channel@347 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm8";
+	};
+
+	channel@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_die_temp";
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "SC8280XP-LENOVO-X13S";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"VA DMIC0", "VA MIC BIAS1",
+		"VA DMIC1", "VA MIC BIAS1",
+		"VA DMIC2", "VA MIC BIAS3",
+		"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: wsa8830-left@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_default>;
+		powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+
+	right_spkr: wsa8830-right@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_default>;
+		powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddio-supply = <&vreg_s10b>;
+		vddbtcxmx-supply = <&vreg_s12b>;
+		vddrfacmn-supply = <&vreg_s12b>;
+		vddrfa0p8-supply = <&vreg_s12b>;
+		vddrfa1p2-supply = <&vreg_s11b>;
+		vddrfa1p7-supply = <&vreg_s1c>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l9d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_s10b>;
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+	status = "okay";
+};
+
+&pmc8280_1_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio8";
+		function = "normal";
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio9";
+		function = "normal";
+	};
+
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmc8280c_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>;
+
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio107";
+		function = "gpio";
+		bias-disable;
+	};
+
+	i2c4_default: i2c4-default-state {
+		pins = "gpio171", "gpio172";
+		function = "qup4";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c21_default: i2c21-default-state {
+		pins = "gpio81", "gpio82";
+		function = "qup21";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		disable-pins {
+			pins = "gpio102";
+			function = "gpio";
+			output-low;
+		};
+
+		int-n-pins {
+			pins = "gpio104";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-pins {
+			pins = "gpio105";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	spkr_1_sd_n_default: spkr-1-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spkr_2_sd_n_default: spkr-2-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		int-n-pins {
+			pins = "gpio182";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio175";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio99";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
new file mode 100644
index 0000000000..80ee12ded4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8280_1_thermal: pm8280-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pm8280_2_thermal: pm8280-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmk8280: pmic@0 {
+		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmk8280_pon: pon@1300 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pmk8280_pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				status = "disabled";
+			};
+
+			pmk8280_pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8280_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8280_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm5-gen2";
+			reg = <0x3400>;
+			interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8280_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts-extended = <&spmi_bus 0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		pmk8280_sdam_6: nvram@8500 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8500>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x8500 0x100>;
+			status = "disabled";
+		};
+	};
+
+	pmc8280_1: pmic@1 {
+		compatible = "qcom,pm8350", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8280_1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8280_1_gpios: gpio@8800 {
+			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8280_1_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmc8280c: pmic@2 {
+		compatible = "qcom,pm8350c", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8280c_gpios: gpio@8800 {
+			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8280c_gpios 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmc8280c_lpg: pwm {
+			compatible = "qcom,pm8350c-pwm";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+
+	pmc8280_2: pmic@3 {
+		compatible = "qcom,pm8350", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8280_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8280_2_gpios: gpio@8800 {
+			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8280_2_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmr735a: pmic@4 {
+		compatible = "qcom,pmr735a", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735a_gpios: gpio@8800 {
+			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735a_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
new file mode 100644
index 0000000000..b808151317
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -0,0 +1,5222 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sc8280xp.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1c";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1c";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1c";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1c";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <355>;
+				exit-latency-us = <909>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <241>;
+				exit-latency-us = <1461>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sc8280xp", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+		};
+	};
+
+	aggre1_noc: interconnect-aggre1-noc {
+		compatible = "qcom,sc8280xp-aggre1-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	aggre2_noc: interconnect-aggre2-noc {
+		compatible = "qcom,sc8280xp-aggre2-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	clk_virt: interconnect-clk-virt {
+		compatible = "qcom,sc8280xp-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	config_noc: interconnect-config-noc {
+		compatible = "qcom,sc8280xp-config-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	dc_noc: interconnect-dc-noc {
+		compatible = "qcom,sc8280xp-dc-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gem_noc: interconnect-gem-noc {
+		compatible = "qcom,sc8280xp-gem-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	lpass_noc: interconnect-lpass-ag-noc {
+		compatible = "qcom,sc8280xp-lpass-ag-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sc8280xp-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mmss_noc: interconnect-mmss-noc {
+		compatible = "qcom,sc8280xp-mmss-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspa_noc: interconnect-nspa-noc {
+		compatible = "qcom,sc8280xp-nspa-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspb_noc: interconnect-nspb-noc {
+		compatible = "qcom,sc8280xp-nspb-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	system_noc: interconnect-system-noc {
+		compatible = "qcom,sc8280xp-system-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <(384000 * 32)>;
+		};
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(480000 * 32)>;
+		};
+		opp-595200000 {
+			opp-hz = /bits/ 64 <595200000>;
+			opp-peak-kBps = <(576000 * 32)>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(672000 * 32)>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(768000 * 32)>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(864000 * 32)>;
+		};
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(960000 * 32)>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1075200 * 32)>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1267200 * 32)>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(1363200 * 32)>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1536000 * 32)>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(1612800 * 32)>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2227200000 {
+			opp-hz = /bits/ 64 <2227200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <(768000 * 32)>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(864000 * 32)>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <(960000 * 32)>;
+		};
+		opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(1267200 * 32)>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1363200 * 32)>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1459200 * 32)>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1612800 * 32)>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2284800000 {
+			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2496000000 {
+			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2592000000 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2688000000 {
+			opp-hz = /bits/ 64 <2688000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2803200000 {
+			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2899200000 {
+			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2995200000 {
+			opp-hz = /bits/ 64 <2995200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		reserved-region@80000000 {
+			reg = <0 0x80000000 0 0x860000>;
+			no-map;
+		};
+
+		cmd_db: cmd-db-region@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x80860000 0 0x20000>;
+			no-map;
+		};
+
+		reserved-region@80880000 {
+			reg = <0 0x80880000 0 0x80000>;
+			no-map;
+		};
+
+		smem_mem: smem-region@80900000 {
+			compatible = "qcom,smem";
+			reg = <0 0x80900000 0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		reserved-region@80b00000 {
+			reg = <0 0x80b00000 0 0x100000>;
+			no-map;
+		};
+
+		reserved-region@83b00000 {
+			reg = <0 0x83b00000 0 0x1700000>;
+			no-map;
+		};
+
+		reserved-region@85b00000 {
+			reg = <0 0x85b00000 0 0xc00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: adsp-region@86c00000 {
+			reg = <0 0x86c00000 0 0x2000000>;
+			no-map;
+		};
+
+		pil_nsp0_mem: cdsp0-region@8a100000 {
+			reg = <0 0x8a100000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_nsp1_mem: cdsp1-region@8c600000 {
+			reg = <0 0x8c600000 0 0x1e00000>;
+			no-map;
+		};
+
+		reserved-region@aeb00000 {
+			reg = <0 0xaeb00000 0 0x16600000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-nsp0 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_nsp0_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_nsp0_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-nsp1 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_NSP1
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <12>;
+
+		smp2p_nsp1_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_nsp1_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		ethernet0: ethernet@20000 {
+			compatible = "qcom,sc8280xp-ethqos";
+			reg = <0x0 0x00020000 0x0 0x10000>,
+			      <0x0 0x00036000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC0_PTP_CLK>,
+				 <&gcc GCC_EMAC0_RGMII_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "rgmii";
+
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			iommus = <&apps_smmu 0x4c0 0xf>;
+			power-domains = <&gcc EMAC_0_GDSC>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc8280xp";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&pcie2a_phy>,
+				 <&pcie2b_phy>,
+				 <&pcie3a_phy>,
+				 <&pcie3b_phy>,
+				 <&pcie4_phy>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_CX>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qup2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0xa3 0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c16: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi16: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c17: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi17: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			uart17: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c18: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi18: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c19: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi19: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c20: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi20: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c21: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi21: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c22: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi22: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c23: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi23: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		qup0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x009c0000 0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x563 0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0098c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		qup1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x83 0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10d3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x010d3000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_HWKM_CLK>;
+			clock-names = "core";
+		};
+
+		pcie4: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x30000000 0x0 0xf1d>,
+			      <0x0 0x30000f20 0x0 0xa8>,
+			      <0x0 0x30001000 0x0 0x1000>,
+			      <0x0 0x30100000 0x0 0x100000>,
+			      <0x0 0x01c03000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x30200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <6>;
+			num-lanes = <1>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE4_QX_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf",
+				      "cnoc_qx";
+
+			assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_4 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_4_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_4_GDSC>;
+
+			phys = <&pcie4_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie4_phy: phy@1c06000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x01c06000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_CLKREF_CLK>,
+				 <&gcc GCC_PCIE4_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_4_PIPE_CLK>,
+				 <&gcc GCC_PCIE_4_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE4_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_4_GDSC>;
+
+			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_4_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie3b: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x32000000 0x0 0xf1d>,
+			      <0x0 0x32000f20 0x0 0xa8>,
+			      <0x0 0x32001000 0x0 0x1000>,
+			      <0x0 0x32100000 0x0 0x100000>,
+			      <0x0 0x01c0b000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x32200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <5>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
+				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3B_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3B 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3B 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3B_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3B_GDSC>;
+
+			phys = <&pcie3b_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie3b_phy: phy@1c0e000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
+				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3B_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3B_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_3B_GDSC>;
+
+			resets = <&gcc GCC_PCIE_3B_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3b_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie3a: pcie@1c10000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c10000 0x0 0x3000>,
+			      <0x0 0x34000000 0x0 0xf1d>,
+			      <0x0 0x34000f20 0x0 0xa8>,
+			      <0x0 0x34001000 0x0 0x1000>,
+			      <0x0 0x34100000 0x0 0x100000>,
+			      <0x0 0x01c13000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x34200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <4>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
+				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_3A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3A 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3A 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3A_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3A_GDSC>;
+
+			phys = <&pcie3a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie3a_phy: phy@1c14000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+			reg = <0x0 0x01c14000 0x0 0x2000>,
+			      <0x0 0x01c16000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
+				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3A_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_3A_GDSC>;
+
+			resets = <&gcc GCC_PCIE_3A_PHY_BCR>;
+			reset-names = "phy";
+
+			qcom,4ln-config-sel = <&tcsr 0xa044 1>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie2b: pcie@1c18000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c18000 0x0 0x3000>,
+			      <0x0 0x38000000 0x0 0xf1d>,
+			      <0x0 0x38000f20 0x0 0xa8>,
+			      <0x0 0x38001000 0x0 0x1000>,
+			      <0x0 0x38100000 0x0 0x100000>,
+			      <0x0 0x01c1b000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x38200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <3>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2B_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2B_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2B_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_2B_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2B 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2B 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_2B_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2B_GDSC>;
+
+			phys = <&pcie2b_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie2b_phy: phy@1c1e000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c1e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_2B_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_2B_GDSC>;
+
+			resets = <&gcc GCC_PCIE_2B_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2b_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie2a: pcie@1c20000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c20000 0x0 0x3000>,
+			      <0x0 0x3c000000 0x0 0xf1d>,
+			      <0x0 0x3c000f20 0x0 0xa8>,
+			      <0x0 0x3c001000 0x0 0x1000>,
+			      <0x0 0x3c100000 0x0 0x100000>,
+			      <0x0 0x01c23000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <2>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_2A_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2A_GDSC>;
+
+			phys = <&pcie2a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie2a_phy: phy@1c24000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+			reg = <0x0 0x01c24000 0x0 0x2000>,
+			      <0x0 0x01c26000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_2A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_2A_GDSC>;
+
+			resets = <&gcc GCC_PCIE_2A_PHY_BCR>;
+			reset-names = "phy";
+
+			qcom,4ln-config-sel = <&tcsr 0xa044 0>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc8280xp-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1000>;
+
+			clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_card_hc: ufs@1da4000 {
+			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01da4000 0 0x3000>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_card_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_CARD_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_CARD_GDSC>;
+
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			dma-coherent;
+
+			clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
+				 <&gcc GCC_UFS_CARD_AHB_CLK>,
+				 <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
+				 <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			status = "disabled";
+		};
+
+		ufs_card_phy: phy@1da7000 {
+			compatible = "qcom,sc8280xp-qmp-ufs-phy";
+			reg = <0 0x01da7000 0 0x1000>;
+
+			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
+				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_CARD_GDSC>;
+
+			resets = <&ufs_card_hc 0>;
+			reset-names = "ufsphy";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sc8280xp-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-690.0", "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <451000>;
+				};
+
+				opp-410000000 {
+					opp-hz = /bits/ 64 <410000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-547000000 {
+					opp-hz = /bits/ 64 <547000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-606000000 {
+					opp-hz = /bits/ 64 <606000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-655000000 {
+					opp-hz = /bits/ 64 <655000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-690000000 {
+					opp-hz = /bits/ 64 <690000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&gpu_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sc8280xp-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+
+			power-domains = <&rpmhpd SC8280XP_GFX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpu_smmu: iommu@3da0000 {
+			compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		usb_0_hsphy: phy@88e5000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e5000 0 0x400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy0: phy@88e7000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e7000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy1: phy@88e8000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e8000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy2: phy@88e9000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e9000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy3: phy@88ea000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088ea000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_qmpphy0: phy@88ef000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088ef000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_qmpphy1: phy@88f1000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088f1000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,sc8280xp-adsp-pas";
+			reg = <0 0x03000000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8280XP_LCX>,
+					<&rpmhpd SC8280XP_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x0c01 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		rxmacro: rxmacro@3200000 {
+			compatible = "qcom,sc8280xp-lpass-rx-macro";
+			reg = <0 0x03200000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			clock-output-names = "mclk";
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_default>;
+
+			status = "disabled";
+		};
+
+		swr1: soundwire-controller@3210000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0 0x03210000 0 0x2000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+			reset-names = "swr_audio_cgcr";
+			label = "RX";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		txmacro: txmacro@3220000 {
+			compatible = "qcom,sc8280xp-lpass-tx-macro";
+			reg = <0 0x03220000 0 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_default>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+			clock-output-names = "mclk";
+
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sc8280xp-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_default>;
+
+			status = "disabled";
+		};
+
+		swr0: soundwire-controller@3250000 {
+			reg = <0 0x03250000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.6.0";
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
+			reset-names = "swr_audio_cgcr";
+			label = "WSA";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		lpass_audiocc: clock-controller@32a9000 {
+			compatible = "qcom,sc8280xp-lpassaudiocc";
+			reg = <0 0x032a9000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		swr2: soundwire-controller@3330000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0 0x03330000 0 0x2000>;
+			interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+
+			clocks = <&txmacro>;
+			clock-names = "iface";
+			resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>;
+			reset-names = "swr_audio_cgcr";
+			label = "TX";
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x01>;
+
+			status = "disabled";
+		};
+
+		vamacro: codec@3370000 {
+			compatible = "qcom,sc8280xp-lpass-va-macro";
+			reg = <0 0x03370000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec", "npl";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sc8280xp-lpass-lpi-pinctrl";
+			reg = <0 0x33c0000 0x0 0x20000>,
+			      <0 0x3550000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 19>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			status = "disabled";
+
+			tx_swr_default: tx-swr-default-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_default: rx-swr-default-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic01_sleep: dmic01-sleep-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_sleep: dmic02-sleep-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			wsa_swr_default: wsa-swr-default-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_default: wsa2-swr-default-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpasscc: clock-controller@33e0000 {
+			compatible = "qcom,sc8280xp-lpasscc";
+			reg = <0 0x033e0000 0 0x12000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		sdc2: mmc@8804000 {
+			compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			iommus = <&apps_smmu 0x4e0 0x0>;
+			power-domains = <&rpmhpd SC8280XP_CX>;
+			operating-points-v2 = <&sdc2_opp_table>;
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 400000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <200000 0>;
+				};
+			};
+		};
+
+		usb_0_qmpphy: phy@88eb000 {
+			compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+			reg = <0 0x088eb000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB4_EUD_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_0_qmpphy_out: endpoint {};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_0_qmpphy_dp_in: endpoint {};
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@8902000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x08902000 0 0x400>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_qmpphy: phy@8903000 {
+			compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+			reg = <0 0x08903000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&gcc GCC_USB4_CLKREF_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {};
+				};
+			};
+		};
+
+		mdss1_dp0_phy: phy@8909a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x08909a00 0 0x19c>,
+			      <0 0x08909200 0 0xec>,
+			      <0 0x08909600 0 0xec>,
+			      <0 0x08909000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp1_phy: phy@890ca00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0890ca00 0 0x19c>,
+			      <0 0x0890c200 0 0xec>,
+			      <0 0x0890c600 0 0xec>,
+			      <0 0x0890c000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x09091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <2597000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <2929000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <3879000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <5161000>;
+				};
+				opp-7 {
+					opp-peak-kBps = <5931000>;
+				};
+				opp-8 {
+					opp-peak-kBps = <6515000>;
+				};
+				opp-9 {
+					opp-peak-kBps = <7980000>;
+				};
+				opp-10 {
+					opp-peak-kBps = <8136000>;
+				};
+				opp-11 {
+					opp-peak-kBps = <10437000>;
+				};
+				opp-12 {
+					opp-peak-kBps = <12191000>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x090b6400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2288000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <4577000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <7110000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <9155000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <12298000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <14236000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <15258001>;
+				};
+			};
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc8280xp-llcc";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+			      <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc4_base", "llcc5_base",
+				    "llcc6_base", "llcc7_base",  "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb_0: usb@a6f8800 {
+			compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_0_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x820 0x0>;
+				phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_0_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a8f8800 {
+			compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x860 0x0>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_1_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		mdss0: display-subsystem@ae00000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+			iommus = <&apps_smmu 0x1000 0x402>;
+			power-domains = <&dispcc0 MDSS_GDSC>;
+			resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss0_mdp: display-controller@ae01000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+				interrupt-parent = <&mdss0>;
+				interrupts = <0>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdss0_mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_intf0_out: endpoint {
+							remote-endpoint = <&mdss0_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss0_intf4_out: endpoint {
+							remote-endpoint = <&mdss0_dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+						mdss0_intf5_out: endpoint {
+							remote-endpoint = <&mdss0_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss0_intf6_out: endpoint {
+							remote-endpoint = <&mdss0_dp2_in>;
+						};
+					};
+				};
+
+				mdss0_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss0_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <12>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp0_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp0_in: endpoint {
+							remote-endpoint = <&mdss0_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp0_out: endpoint {
+						};
+					};
+				};
+
+				mdss0_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp1: displayport-controller@ae98000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae98000 0 0x200>,
+				      <0 0xae98200 0 0x200>,
+				      <0 0xae98400 0 0x600>,
+				      <0 0xae99000 0 0x400>,
+				      <0 0xae99400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <13>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp1_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp1_in: endpoint {
+							remote-endpoint = <&mdss0_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp1_out: endpoint {
+						};
+					};
+				};
+
+				mdss0_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp2: displayport-controller@ae9a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae9a000 0 0x200>,
+				      <0 0xae9a200 0 0x200>,
+				      <0 0xae9a400 0 0x600>,
+				      <0 0xae9b000 0 0x400>,
+				      <0 0xae9b400 0 0x400>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss0>;
+				interrupts = <14>;
+				phys = <&mdss0_dp2_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+				operating-points-v2 = <&mdss0_dp2_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp2_in: endpoint {
+							remote-endpoint = <&mdss0_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp3: displayport-controller@aea0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xaea0000 0 0x200>,
+				      <0 0xaea0200 0 0x200>,
+				      <0 0xaea0400 0 0x600>,
+				      <0 0xaea1000 0 0x400>,
+				      <0 0xaea1400 0 0x400>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss0>;
+				interrupts = <15>;
+				phys = <&mdss0_dp3_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>;
+				operating-points-v2 = <&mdss0_dp3_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp3_in: endpoint {
+							remote-endpoint = <&mdss0_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss0_dp2_phy: phy@aec2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec2a00 0 0x19c>,
+			      <0 0x0aec2200 0 0xec>,
+			      <0 0x0aec2600 0 0xec>,
+			      <0 0x0aec2000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss0_dp3_phy: phy@aec5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec5a00 0 0x19c>,
+			      <0 0x0aec5200 0 0xec>,
+			      <0 0x0aec5600 0 0xec>,
+			      <0 0x0aec5000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc0: clock-controller@af00000 {
+			compatible = "qcom,sc8280xp-dispcc0";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <&mdss0_dp2_phy 0>,
+				 <&mdss0_dp2_phy 1>,
+				 <&mdss0_dp3_phy 0>,
+				 <&mdss0_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 3>,
+					  <69 86 1>,
+					  <70 520 54>,
+					  <124 609 28>,
+					  <159 638 1>,
+					  <160 720 8>,
+					  <168 801 1>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 1>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 3>,
+					  <229 240 3>,
+					  <232 269 1>,
+					  <233 377 1>,
+					  <234 372 1>,
+					  <235 138 1>,
+					  <236 857 1>,
+					  <237 860 1>,
+					  <238 137 1>,
+					  <239 668 1>,
+					  <240 366 1>,
+					  <241 949 1>,
+					  <242 815 5>,
+					  <247 769 1>,
+					  <248 768 1>,
+					  <249 663 1>,
+					  <250 799 2>,
+					  <252 798 1>,
+					  <253 765 1>,
+					  <254 763 1>,
+					  <255 454 1>,
+					  <258 139 1>,
+					  <259 786 2>,
+					  <261 370 2>,
+					  <263 158 2>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x8>; /* SROT */
+			#qcom,sensors = <14>;
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sc8280xp-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 230>;
+			wakeup-parent = <&pdc>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17a40000 0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c26000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+			label = "apps_rsc";
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc8280xp-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board_clk>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc8280xp-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sc8280xp-epss-l3", "qcom,epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		remoteproc_nsp0: remoteproc@1b300000 {
+			compatible = "qcom,sc8280xp-nsp0-pas";
+			reg = <0 0x1b300000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8280XP_NSP>;
+			power-domain-names = "nsp";
+
+			memory-region = <&pil_nsp0_mem>;
+
+			qcom,smem-states = <&smp2p_nsp0_out 0>;
+			qcom,smem-state-names = "stop";
+
+			interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "nsp0";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x3181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x3182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x3183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x3184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x3185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x3186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x3187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x3188 0x0420>;
+					};
+
+					compute-cb@9 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <9>;
+						iommus = <&apps_smmu 0x318b 0x0420>;
+					};
+
+					compute-cb@10 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <10>;
+						iommus = <&apps_smmu 0x318b 0x0420>;
+					};
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x318c 0x0420>;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x318d 0x0420>;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x318e 0x0420>;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x318f 0x0420>;
+					};
+				};
+			};
+		};
+
+		remoteproc_nsp1: remoteproc@21300000 {
+			compatible = "qcom,sc8280xp-nsp1-pas";
+			reg = <0 0x21300000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8280XP_NSP>;
+			power-domain-names = "nsp";
+
+			memory-region = <&pil_nsp1_mem>;
+
+			qcom,smem-states = <&smp2p_nsp1_out 0>;
+			qcom,smem-state-names = "stop";
+
+			interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_NSP1
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "nsp1";
+				qcom,remote-pid = <12>;
+			};
+		};
+
+		mdss1: display-subsystem@22000000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x22000000 0 0x1000>;
+			reg-names = "mdss";
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&apps_smmu 0x1800 0x402>;
+			power-domains = <&dispcc1 MDSS_GDSC>;
+			resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss1_mdp: display-controller@22001000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x22001000 0 0x8f000>,
+				      <0 0x220b0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+				interrupt-parent = <&mdss1>;
+				interrupts = <0>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdss1_mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_intf0_out: endpoint {
+							remote-endpoint = <&mdss1_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss1_intf4_out: endpoint {
+							remote-endpoint = <&mdss1_dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+						mdss1_intf5_out: endpoint {
+							remote-endpoint = <&mdss1_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss1_intf6_out: endpoint {
+							remote-endpoint = <&mdss1_dp2_in>;
+						};
+					};
+				};
+
+				mdss1_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss1_dp0: displayport-controller@22090000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22090000 0 0x200>,
+				      <0 0x22090200 0 0x200>,
+				      <0 0x22090400 0 0x600>,
+				      <0 0x22091000 0 0x400>,
+				      <0 0x22091400 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <12>;
+				phys = <&mdss1_dp0_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+				operating-points-v2 = <&mdss1_dp0_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp0_in: endpoint {
+							remote-endpoint = <&mdss1_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp1: displayport-controller@22098000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22098000 0 0x200>,
+				      <0 0x22098200 0 0x200>,
+				      <0 0x22098400 0 0x600>,
+				      <0 0x22099000 0 0x400>,
+				      <0 0x22099400 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <13>;
+				phys = <&mdss1_dp1_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+				operating-points-v2 = <&mdss1_dp1_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp1_in: endpoint {
+							remote-endpoint = <&mdss1_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp2: displayport-controller@2209a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x2209a000 0 0x200>,
+				      <0 0x2209a200 0 0x200>,
+				      <0 0x2209a400 0 0x600>,
+				      <0 0x2209b000 0 0x400>,
+				      <0 0x2209b400 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <14>;
+				phys = <&mdss1_dp2_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+				operating-points-v2 = <&mdss1_dp2_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp2_in: endpoint {
+							remote-endpoint = <&mdss1_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp3: displayport-controller@220a0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x220a0000 0 0x200>,
+				      <0 0x220a0200 0 0x200>,
+				      <0 0x220a0400 0 0x600>,
+				      <0 0x220a1000 0 0x400>,
+				      <0 0x220a1400 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <15>;
+				phys = <&mdss1_dp3_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>;
+				operating-points-v2 = <&mdss1_dp3_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp3_in: endpoint {
+							remote-endpoint = <&mdss1_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss1_dp2_phy: phy@220c2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c2a00 0 0x19c>,
+			      <0 0x220c2200 0 0xec>,
+			      <0 0x220c2600 0 0xec>,
+			      <0 0x220c2000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp3_phy: phy@220c5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c5a00 0 0x19c>,
+			      <0 0x220c5200 0 0xec>,
+			      <0 0x220c5600 0 0xec>,
+			      <0 0x220c5000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc1: clock-controller@22100000 {
+			compatible = "qcom,sc8280xp-dispcc1";
+			reg = <0 0x22100000 0 0x20000>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <&mdss1_dp0_phy 0>,
+				 <&mdss1_dp0_phy 1>,
+				 <&mdss1_dp1_phy 0>,
+				 <&mdss1_dp1_phy 1>,
+				 <&mdss1_dp2_phy 0>,
+				 <&mdss1_dp2_phy 1>,
+				 <&mdss1_dp3_phy 0>,
+				 <&mdss1_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		ethernet1: ethernet@23000000 {
+			compatible = "qcom,sc8280xp-ethqos";
+			reg = <0x0 0x23000000 0x0 0x10000>,
+			      <0x0 0x23016000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
+				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC1_PTP_CLK>,
+				 <&gcc GCC_EMAC1_RGMII_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "rgmii";
+
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			iommus = <&apps_smmu 0x40 0xf>;
+			power-domains = <&gcc EMAC_1_GDSC>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
new file mode 100644
index 0000000000..2ed39d402d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm660.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+
+/ {
+	model = "Inforce 6560 Single Board Computer";
+	compatible = "inforce,ifc6560", "qcom,sda660";
+	chassis-type = "embedded"; /* SBC */
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volup {
+			label = "Volume Up";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3p3_bck_bst: v3p3-bck-bst-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v3p3_bck_bst";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	v1p2_ldo: v1p2-ldo-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v1p2_ldo";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	v5p0_boost: v5p0-boost-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v5p0_boost";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&adsp_pil {
+	firmware-name = "qcom/sda660/adsp.mbn";
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	adv7533: hdmi@39 {
+		compatible = "adi,adv7535";
+		reg = <0x39>, <0x66>;
+		reg-names = "main", "edid";
+
+		interrupt-parent = <&pm660l_gpios>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+		clock-names = "cec";
+		/*
+		 * Limit to 3 lanes to prevent the bridge from changing amount
+		 * of lanes in the fly. MSM DSI host doesn't like that.
+		 */
+		adi,dsi-lanes = <3>;
+		avdd-supply = <&vreg_l13a_1p8>;
+		dvdd-supply = <&vreg_l13a_1p8>;
+		pvdd-supply = <&vreg_l13a_1p8>;
+		a2vdd-supply = <&vreg_l13a_1p8>;
+		v3p3-supply = <&v3p3_bck_bst>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7533_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&blsp1_dma {
+	/*
+	 * The board will lock up if we toggle the BLSP clock, unless the
+	 * BAM DMA interconnects support is in place.
+	 */
+	/delete-property/ clocks;
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_dma {
+	/*
+	 * The board will lock up if we toggle the BLSP clock, unless the
+	 * BAM DMA interconnects support is in place.
+	 */
+	/delete-property/ clocks;
+};
+
+&blsp2_uart1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_l13a_1p8>;
+		vddxo-supply = <&vreg_l9a_1p8>;
+		vddrf-supply = <&vreg_l6a_1p3>;
+		vddch0-supply = <&vreg_l19a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l1a_1p225>;
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&adv7533_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vcca-supply = <&vreg_l1b_0p925>;
+};
+
+&mmss_smmu {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qusb2phy0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&qusb2phy1 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm660-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+		vdd_l5-supply = <&vreg_s2b_1p05>;
+		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+		vreg_s4a_2p04: s4 {
+			regulator-min-microvolt = <1805000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_1p35: s5 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l1a_1p225: l1 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a_1p3: l6 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1368000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1804000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l13a_1p8: l13 {
+			/* This gives power to the LPDDR4: never turn it off! */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm660l-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+		vdd_l2-supply = <&vreg_bob>;
+		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+		vdd_l4_l6-supply = <&vreg_bob>;
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_s2b_1p05: s2 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l1b_0p925: l1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <925000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2b_2p95: l2 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l4b_2p95: l4 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		/*
+		 * Downstream specifies a range of 1721-3600mV,
+		 * but the only assigned consumers are SDHCI2 VMMC
+		 * and Coresight QPDI that both request pinned 2.95V.
+		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
+		 * make the mmc driver happy.
+		 */
+		vreg_l5b_2p95: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-system-load = <800000>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l7b_3p125: l7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3125000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8b_3p3: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3624000>;
+			regulator-enable-ramp-delay = <500>;
+			regulator-ramp-delay = <0>;
+		};
+	};
+};
+
+&sdc2_state_on {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&sdc2_state_off {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	supports-cqe;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l5b_2p95>;
+	vqmmc-supply = <&vreg_l2b_2p95>;
+
+	cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+	no-sdio;
+	no-mmc;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <8 4>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
new file mode 100644
index 0000000000..362be5719d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Julian Braha <julianbraha@gmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Motorola Moto G6";
+	compatible = "motorola,ali", "qcom,sdm450";
+	chassis-type = "handset";
+	qcom,msm-id = <338 0>;
+	qcom,board-id = <0x43 0xc200>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84300000 {
+			reg = <0x0 0x84300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		ramoops@ef000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xef000000 0x0 0xc0000>;
+			console-size = <0x40000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&pm8953_l10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,num-strings = <3>;
+	qcom,external-pfet;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <795000>;
+			regulator-max-microvolt = <1081000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <95 5>, <111 1>, <126 1>;
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <0x08>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
new file mode 100644
index 0000000000..9425b2d953
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia 10";
+	compatible = "sony,kirin-row", "qcom,sdm630";
+	chassis-type = "handset";
+
+	chosen {
+		framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
+			height = <2520>;
+		};
+	};
+};
+
+/* Reserve a bigger chunk of RAM for the higher-res display */
+&cont_splash_mem {
+	reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
+};
+
+/* Ganges devices feature a Novatek touchscreen instead. */
+/delete-node/ &touchscreen;
+/delete-node/ &vreg_l18a_1v8;
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
new file mode 100644
index 0000000000..dd484a9bc7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Ultra";
+	compatible = "sony,discovery-row", "qcom,sdm630";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
new file mode 100644
index 0000000000..2da83cd411
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2";
+	compatible = "sony,pioneer-row", "qcom,sdm630";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
new file mode 100644
index 0000000000..a679d4acee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Plus";
+	compatible = "sony,voyager-row", "qcom,sdm630";
+	chassis-type = "handset";
+
+	chosen {
+		framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 (2160 * 1080 * 4)>;
+			height = <2160>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
new file mode 100644
index 0000000000..87d0293c72
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <318 0>;
+	qcom,board-id = <8 1>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
+
+	/* This part enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			status = "okay";
+		};
+	};
+
+	board_vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	cam_vdig_imx300_219_vreg: cam-vdig-imx300-219-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vdig_imx300_219_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_vdig_default>;
+	};
+
+	cam_vana_front_vreg: cam-vana-front-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vana_front_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&imx219_vana_default>;
+	};
+
+	cam_vana_rear_vreg: cam-vana-rear-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vana_rear_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&imx300_vana_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		key-vol-down {
+			label = "Volume Down";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			status = "okay";
+		};
+
+		debug@ffb00000 {
+			reg = <0x00 0xffb00000 0x00 0x100000>;
+			no-map;
+		};
+
+		cont_splash_mem: splash@9d400000 {
+			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+			no-map;
+		};
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&adsp_pil {
+	firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt";
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	touchscreen: synaptics-rmi4-i2c@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 45 0x2008>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_lcd_id_active>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <220>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* SMB1351 charger */
+};
+
+/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* NXP NFC */
+};
+
+&blsp1_uart2 {
+	status = "okay";
+
+	/* MSM serial console */
+};
+
+&blsp2_uart1 {
+	status = "okay";
+
+	/* HCI Bluetooth */
+};
+
+&pm660l_lpg {
+	qcom,power-source = <1>;
+
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qhee_code {
+	reg = <0x00 0x85800000 0x00 0x3700000>;
+};
+
+&qusb2phy0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm660l-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+		vdd_l2-supply = <&vreg_bob>;
+		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+		vdd_l4_l6-supply = <&vreg_bob>;
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_s1b_1p125: s1 {
+			regulator-min-microvolt = <1125000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_s2b_1p05: s2 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/*
+		 * At least on Nile's configuration, S3B/S4B (VDD_CX) and
+		 * S5B (VDD_MX) are managed only through RPM Power Domains.
+		 * Trying to set a voltage on the main supply will create
+		 * havoc and freeze the SoC.
+		 * In any case, reference voltages for these regulators are:
+		 * S3B/S4B: 0.870V
+		 * S5B: 0.915V
+		 */
+
+		/* LDOs */
+		vreg_l1b_0p925: l1 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <928000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2b_2p95: l2 {
+			/*
+			 * This regulator supports 1.648 - 3.104V on this board
+			 * but we set a max voltage of anything less than 2.7V
+			 * to satisfy a condition in sdhci.c that will disable
+			 * 3.3V SDHCI signaling, which happens to be not really
+			 * supported on the Xperia Nile/Ganges platform.
+			 */
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3b_3p0: l3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l4b_2p95: l4 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		/*
+		 * Downstream specifies a range of 1721-3600mV,
+		 * but the only assigned consumers are SDHCI2 VMMC
+		 * and Coresight QPDI that both request pinned 2.95V.
+		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
+		 * make the mmc driver happy.
+		 */
+		vreg_l5b_2p95: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l6b_3p3: l6 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l7b_3p125: l7 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3128000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l8b_3p3: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* L9B (870mV) is currently unused */
+		/* L10B (915mV) is currently unused */
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3624000>;
+			regulator-enable-ramp-delay = <500>;
+			regulator-ramp-delay = <0>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm660-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+		vdd_l5-supply = <&vreg_s2b_1p05>;
+		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: s4 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_1p35: s5 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_s6a_0p87: s6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <992000>;
+			regulator-enable-ramp-delay = <150>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: l1 {
+			regulator-min-microvolt = <1226000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p0: l2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1008000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1008000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l5a_0p848: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l6a_1p3: l6 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1368000>;
+			regulator-allow-set-load;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l7a_1p2: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1804000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a_1p8: l11 {
+			regulator-min-microvolt = <1784000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* This gives power to the LPDDR4: never turn it off! */
+		vreg_l13a_1p8: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* L16A (2.70V) is unused */
+
+		vreg_l17a_1p8: l17 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l18a_1v8: l18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <10>;
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <50000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdc2_state_on {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&sdc2_state_off {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	supports-cqe;
+
+	/* SoMC Nile platform's eMMC doesn't support HS200 mode */
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l5b_2p95>;
+	vqmmc-supply = <&vreg_l2b_2p95>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <8 4>;
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio45";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_lcd_id_active: ts-lcd-id-active-state {
+		pins = "gpio56";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	imx300_vana_default: imx300-vana-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	imx219_vana_default: imx219-vana-default-state {
+		pins = "gpio51";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cam_vdig_default: cam-vdig-default-state {
+		pins = "gpio52";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
new file mode 100644
index 0000000000..ec6003212c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -0,0 +1,2541 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
+#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,sdm660.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,apr.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc1 = &sdhc_1;
+		mmc2 = &sdhc_2;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <200>;
+			};
+
+			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <154>;
+				exit-latency-us = <87>;
+				min-residency-us = <200>;
+			};
+
+			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <262>;
+				exit-latency-us = <301>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <284>;
+				exit-latency-us = <384>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <272>;
+				exit-latency-us = <329>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <332>;
+				exit-latency-us = <368>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <545>;
+				exit-latency-us = <1609>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8998", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-131250000 {
+			opp-hz = /bits/ 64 <131250000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-210000000 {
+			opp-hz = /bits/ 64 <210000000>;
+			required-opps = <&rpmpd_opp_svs_plus>;
+		};
+
+		opp-262500000 {
+			opp-hz = /bits/ 64 <262500000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,sdm660-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-sdm660";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,sdm660-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		wlan_msa_guard: wlan-msa-guard@85600000 {
+			reg = <0x0 0x85600000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa-mem@85700000 {
+			reg = <0x0 0x85700000 0x0 0x100000>;
+			no-map;
+		};
+
+		qhee_code: qhee-code@85800000 {
+			reg = <0x0 0x85800000 0x0 0x600000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@85e00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85e00000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		smem_region: smem-mem@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x3300000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8ac00000 {
+			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
+			no-map;
+		};
+
+		adsp_region: adsp@92a00000 {
+			reg = <0x0 0x92a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		mba_region: mba@94800000 {
+			reg = <0x0 0x94800000 0x0 0x200000>;
+			no-map;
+		};
+
+		buffer_mem: tzbuffer@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x100000>;
+			no-map;
+		};
+
+		venus_region: venus@9f800000 {
+			reg = <0x0 0x9f800000 0x0 0x800000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@f6000000 {
+			reg = <0x0 0xf6000000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom-region@f6800000 {
+			reg = <0x0 0xf6800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		zap_shader_region: gpu@fed00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xfed00000 0x0 0xa00000>;
+			no-map;
+		};
+	};
+
+	smem: smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 10>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm630";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00100000 0x94000>;
+
+			clock-names = "xo", "sleep_clk";
+			clocks = <&xo_board>,
+					<&sleep_clk>;
+		};
+
+		rpm_msg_ram: sram@778000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00778000 0x7000>;
+		};
+
+		qfprom: qfprom@780000 {
+			compatible = "qcom,sdm630-qfprom", "qcom,qfprom";
+			reg = <0x00780000 0x621c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@240 {
+				reg = <0x243 0x1>;
+				bits = <1 3>;
+			};
+
+			gpu_speed_bin: gpu-speed-bin@41a0 {
+				reg = <0x41a2 0x1>;
+				bits = <5 7>;
+			};
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x00793000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		bimc: interconnect@1008000 {
+			compatible = "qcom,sdm660-bimc";
+			reg = <0x01008000 0x78000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		restart@10ac000 {
+			compatible = "qcom,pshold";
+			reg = <0x010ac000 0x4>;
+		};
+
+		cnoc: interconnect@1500000 {
+			compatible = "qcom,sdm660-cnoc";
+			reg = <0x01500000 0x10000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
+		snoc: interconnect@1626000 {
+			compatible = "qcom,sdm660-snoc";
+			reg = <0x01626000 0x7090>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		anoc2_smmu: iommu@16c0000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x016c0000 0x40000>;
+
+			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			assigned-clock-rates = <1000>;
+			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "bus";
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		a2noc: interconnect@1704000 {
+			compatible = "qcom,sdm660-a2noc";
+			reg = <0x01704000 0xc100>;
+			#interconnect-cells = <1>;
+			clock-names = "bus",
+				      "bus_a",
+				      "ipa",
+				      "ufs_axi",
+				      "aggre2_ufs_axi",
+				      "aggre2_usb3_axi",
+				      "cfg_noc_usb2_axi";
+			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+				 <&rpmcc RPM_SMD_IPA_CLK>,
+				 <&gcc GCC_UFS_AXI_CLK>,
+				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
+		};
+
+		mnoc: interconnect@1745000 {
+			compatible = "qcom,sdm660-mnoc";
+			reg = <0x01745000 0xa010>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a", "iface";
+			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
+				 <&mmcc AHB_CLK_SRC>;
+		};
+
+		tsens: thermal-sensor@10ae000 {
+			compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
+			reg = <0x010ae000 0x1000>, /* TM */
+				  <0x010ad000 0x1000>; /* SROT */
+			#qcom,sensors = <12>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					 <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,sdm630-tcsr", "syscon";
+			reg = <0x01f60000 0x20000>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,sdm630-pinctrl";
+			reg = <0x03100000 0x400000>,
+				  <0x03500000 0x400000>,
+				  <0x03900000 0x400000>;
+			reg-names = "south", "center", "north";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 114>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_default: blsp2-uart1-active-state {
+				tx-rts-pins {
+					pins = "gpio16", "gpio19";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					/*
+					 * Avoid garbage data while BT module
+					 * is powered off or not driving signal
+					 */
+					pins = "gpio17";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cts-pins {
+					/* Match the pull of the BT module */
+					pins = "gpio18";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
+				tx-pins {
+					pins = "gpio16";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rx-cts-rts-pins {
+					pins = "gpio17", "gpio18", "gpio19";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			i2c1_default: i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c2_default: i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c3_default: i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c3_sleep: i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c4_default: i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_sleep: i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c5_default: i2c5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c6_default: i2c6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c7_default: i2c7-default-state {
+				pins = "gpio26", "gpio27";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep-state {
+				pins = "gpio26", "gpio27";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c8_default: i2c8-default-state {
+				pins = "gpio30", "gpio31";
+				function = "blsp_i2c8_a";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c8_sleep: i2c8-sleep-state {
+				pins = "gpio30", "gpio31";
+				function = "blsp_i2c8_a";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio36","gpio37";
+				function = "cci_i2c";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio38","gpio39";
+				function = "cci_i2c";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		adreno_gpu: gpu@5000000 {
+			compatible = "qcom,adreno-508.0", "qcom,adreno";
+
+			reg = <0x05000000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				<&gpucc GPUCC_RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_GPU_BIMC_GFX_CLK>,
+				<&gpucc GPUCC_RBCPR_CLK>,
+				<&gpucc GPUCC_GFX3D_CLK>;
+
+			clock-names = "iface",
+				"rbbmtimer",
+				"mem",
+				"mem_iface",
+				"rbcpr",
+				"core";
+
+			power-domains = <&rpmpd SDM660_VDDMX>;
+			iommus = <&kgsl_smmu 0>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>;
+			interconnect-names = "gfx-mem";
+
+			operating-points-v2 = <&gpu_sdm630_opp_table>;
+
+			status = "disabled";
+
+			gpu_sdm630_opp_table: opp-table {
+				compatible = "operating-points-v2";
+				opp-775000000 {
+					opp-hz = /bits/ 64 <775000000>;
+					opp-level = <RPM_SMD_LEVEL_TURBO>;
+					opp-peak-kBps = <5412000>;
+					opp-supported-hw = <0xa2>;
+				};
+				opp-647000000 {
+					opp-hz = /bits/ 64 <647000000>;
+					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					opp-peak-kBps = <4068000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-588000000 {
+					opp-hz = /bits/ 64 <588000000>;
+					opp-level = <RPM_SMD_LEVEL_NOM>;
+					opp-peak-kBps = <3072000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-465000000 {
+					opp-hz = /bits/ 64 <465000000>;
+					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					opp-peak-kBps = <2724000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-370000000 {
+					opp-hz = /bits/ 64 <370000000>;
+					opp-level = <RPM_SMD_LEVEL_SVS>;
+					opp-peak-kBps = <2188000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1648000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-160000000 {
+					opp-hz = /bits/ 64 <160000000>;
+					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1200000>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+		};
+
+		kgsl_smmu: iommu@5040000 {
+			compatible = "qcom,sdm630-smmu-v2",
+				     "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0x05040000 0x10000>;
+
+			/*
+			 * GX GDSC parent is CX. We need to bring up CX for SMMU
+			 * but we need both up for Adreno. On the other hand, we
+			 * need to manage the GX rpmpd domain in the adreno driver.
+			 * Enable CX/GX GDSCs here so that we can manage just the GX
+			 * RPM Power Domain in the Adreno driver.
+			 */
+			power-domains = <&gpucc GPU_GX_GDSC>;
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
+			clock-names = "iface", "mem", "mem_iface";
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		gpucc: clock-controller@5065000 {
+			compatible = "qcom,gpucc-sdm630";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x05065000 0x9038>;
+
+			clocks = <&xo_board>,
+				 <&gcc GCC_GPU_GPLL0_CLK>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK>;
+			clock-names = "xo",
+				      "gcc_gpu_gpll0_clk",
+				      "gcc_gpu_gpll0_div_clk";
+			status = "disabled";
+		};
+
+		lpass_smmu: iommu@5100000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05100000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		sram@290000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		spmi_bus: spmi@800f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0800f000 0x1000>,
+			      <0x08400000 0x1000000>,
+			      <0x09400000 0x1000000>,
+			      <0x0a400000 0x220000>,
+			      <0x0800a000 0x3000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		usb3: usb@a8f8800 {
+			compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+			reg = <0x0a8f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "bus";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>,
+					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>,
+					       <19200000>;
+
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			power-domains = <&gcc USB_30_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+
+			resets = <&gcc GCC_USB_30_BCR>;
+
+			usb3_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a800000 0xc8d0>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+
+				/*
+				 * SDM630 technically supports USB3 but I
+				 * haven't seen any devices making use of it.
+				 */
+				maximum-speed = "high-speed";
+				phys = <&qusb2phy0>;
+				phy-names = "usb2-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
+			};
+		};
+
+		qusb2phy0: phy@c012000 {
+			compatible = "qcom,sdm660-qusb2-phy";
+			reg = <0x0c012000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_RX0_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+			status = "disabled";
+		};
+
+		qusb2phy1: phy@c014000 {
+			compatible = "qcom,sdm660-qusb2-phy";
+			reg = <0x0c014000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@c084000 {
+			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0c084000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			bus-width = <4>;
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+					<&gcc GCC_SDCC2_APPS_CLK>,
+					<&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+
+			interconnects = <&a2noc 3 &a2noc 10>,
+					<&gnoc 0 &cnoc 28>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_state_on>;
+			pinctrl-1 = <&sdc2_state_off>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				 compatible = "operating-points-v2";
+
+				 opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <200000 140000>;
+					opp-avg-kBps = <130718 133320>;
+				 };
+				 opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-peak-kBps = <250000 160000>;
+					opp-avg-kBps = <196078 150000>;
+				 };
+				 opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				 };
+			};
+		};
+
+		sdhc_1: mmc@c0c4000 {
+			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0c0c4000 0x1000>,
+			      <0x0c0c5000 0x1000>,
+			      <0x0c0c8000 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			interconnects = <&a2noc 2 &a2noc 10>,
+					<&gnoc 0 &cnoc 27>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			operating-points-v2 = <&sdhc1_opp_table>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <200000 140000>;
+					opp-avg-kBps = <130718 133320>;
+				};
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-peak-kBps = <250000 160000>;
+					opp-avg-kBps = <196078 150000>;
+				};
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				};
+			};
+		};
+
+		usb2: usb@c2f8800 {
+			compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+			reg = <0x0c2f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core",
+				      "mock_utmi", "sleep";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <60000000>;
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			qcom,select-utmi-as-pipe-clk;
+
+			resets = <&gcc GCC_USB_20_BCR>;
+
+			usb2_dwc3: usb@c200000 {
+				compatible = "snps,dwc3";
+				reg = <0x0c200000 0xc8d0>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+
+				/* This is the HS-only host */
+				maximum-speed = "high-speed";
+				phys = <&qusb2phy1>;
+				phy-names = "usb2-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
+			};
+		};
+
+		mmcc: clock-controller@c8c0000 {
+			compatible = "qcom,mmcc-sdm630";
+			reg = <0x0c8c0000 0x40000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "xo",
+					"sleep_clk",
+					"gpll0",
+					"gpll0_div",
+					"dsi0pll",
+					"dsi0pllbyte",
+					"dsi1pll",
+					"dsi1pllbyte",
+					"dp_link_2x_clk_divsel_five",
+					"dp_vco_divided_clk_src_mux";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+					<&sleep_clk>,
+					<&gcc GCC_MMSS_GPLL0_CLK>,
+					<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
+					<&mdss_dsi0_phy 1>,
+					<&mdss_dsi0_phy 0>,
+					<0>,
+					<0>,
+					<0>,
+					<0>;
+		};
+
+		mdss: display-subsystem@c900000 {
+			compatible = "qcom,mdss";
+			reg = <0x0c900000 0x1000>,
+			      <0x0c9b0000 0x1040>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>,
+				 <&mmcc MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			mdp: display-controller@c901000 {
+				compatible = "qcom,sdm630-mdp5", "qcom,mdp5";
+				reg = <0x0c901000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				assigned-clocks = <&mmcc MDSS_MDP_CLK>,
+						  <&mmcc MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <300000000>,
+						       <19200000>;
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				interconnects = <&mnoc 2 &bimc 5>,
+						<&mnoc 3 &bimc 5>,
+						<&gnoc 0 &mnoc 17>;
+				interconnect-names = "mdp0-mem",
+						     "mdp1-mem",
+						     "rotator-mem";
+				iommus = <&mmss_smmu 0>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SDM660_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-150000000 {
+						opp-hz = /bits/ 64 <150000000>;
+						opp-peak-kBps = <320000 320000 76800>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+					opp-275000000 {
+						opp-hz = /bits/ 64 <275000000>;
+						opp-peak-kBps = <6400000 6400000 160000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						opp-peak-kBps = <6400000 6400000 190000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+					opp-330000000 {
+						opp-hz = /bits/ 64 <330000000>;
+						opp-peak-kBps = <6400000 6400000 240000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+					opp-412500000 {
+						opp-hz = /bits/ 64 <412500000>;
+						opp-peak-kBps = <6400000 6400000 320000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@c994000 {
+				compatible = "qcom,sdm660-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0c994000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SDM660_VDDCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_BYTE0_INTF_CLK>,
+					 <&mmcc MNOC_AHB_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MISC_AHB_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "byte",
+					      "byte_intf",
+					      "mnoc",
+					      "iface",
+					      "bus",
+					      "core_mmss",
+					      "pixel",
+					      "core";
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@c994400 {
+				compatible = "qcom,dsi-phy-14nm-660";
+				reg = <0x0c994400 0x100>,
+				      <0x0c994500 0x300>,
+				      <0x0c994800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+				status = "disabled";
+			};
+		};
+
+		blsp1_dma: dma-controller@c144000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c144000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart1: serial@c16f000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c16f000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@c170000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c170000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@c175000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c175000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+					<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@c176000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c176000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@c177000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c177000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_default>;
+			pinctrl-1 = <&i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@c178000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c178000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@c184000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c184000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp2_uart1: serial@c1af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c1af000 0x200>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@c1b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b5000 0x600>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@c1b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b6000 0x600>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c7: i2c@c1b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b7000 0x600>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c8: i2c@c1b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b8000 0x600>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c8_default>;
+			pinctrl-1 = <&i2c8_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sram@146bf000 {
+			compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
+			reg = <0x146bf000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x146bf000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		camss: camss@ca00020 {
+			compatible = "qcom,sdm660-camss";
+			reg = <0x0ca00020 0x10>,
+			      <0x0ca30000 0x100>,
+			      <0x0ca30400 0x100>,
+			      <0x0ca30800 0x100>,
+			      <0x0ca30c00 0x100>,
+			      <0x0c824000 0x1000>,
+			      <0x0ca00120 0x4>,
+			      <0x0c825000 0x1000>,
+			      <0x0ca00124 0x4>,
+			      <0x0c826000 0x1000>,
+			      <0x0ca00128 0x4>,
+			      <0x0ca31000 0x500>,
+			      <0x0ca10000 0x1000>,
+			      <0x0ca14000 0x1000>;
+			reg-names = "csi_clk_mux",
+				    "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid3",
+				    "csiphy0",
+				    "csiphy0_clk_mux",
+				    "csiphy1",
+				    "csiphy1_clk_mux",
+				    "csiphy2",
+				    "csiphy2_clk_mux",
+				    "ispif",
+				    "vfe0",
+				    "vfe1";
+			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid3",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "ispif",
+					  "vfe0",
+					  "vfe1";
+			clocks = <&mmcc CAMSS_AHB_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID0_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID1_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID2_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID3_CLK>,
+				 <&mmcc CAMSS_CSI0_AHB_CLK>,
+				 <&mmcc CAMSS_CSI0_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID0_CLK>,
+				 <&mmcc CAMSS_CSI0PIX_CLK>,
+				 <&mmcc CAMSS_CSI0RDI_CLK>,
+				 <&mmcc CAMSS_CSI1_AHB_CLK>,
+				 <&mmcc CAMSS_CSI1_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID1_CLK>,
+				 <&mmcc CAMSS_CSI1PIX_CLK>,
+				 <&mmcc CAMSS_CSI1RDI_CLK>,
+				 <&mmcc CAMSS_CSI2_AHB_CLK>,
+				 <&mmcc CAMSS_CSI2_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID2_CLK>,
+				 <&mmcc CAMSS_CSI2PIX_CLK>,
+				 <&mmcc CAMSS_CSI2RDI_CLK>,
+				 <&mmcc CAMSS_CSI3_AHB_CLK>,
+				 <&mmcc CAMSS_CSI3_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID3_CLK>,
+				 <&mmcc CAMSS_CSI3PIX_CLK>,
+				 <&mmcc CAMSS_CSI3RDI_CLK>,
+				 <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+				 <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+				 <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+				 <&mmcc CSIPHY_AHB2CRIF_CLK>,
+				 <&mmcc CAMSS_CSI_VFE0_CLK>,
+				 <&mmcc CAMSS_CSI_VFE1_CLK>,
+				 <&mmcc CAMSS_ISPIF_AHB_CLK>,
+				 <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+				 <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_VFE0_AHB_CLK>,
+				 <&mmcc CAMSS_VFE0_CLK>,
+				 <&mmcc CAMSS_VFE0_STREAM_CLK>,
+				 <&mmcc CAMSS_VFE1_AHB_CLK>,
+				 <&mmcc CAMSS_VFE1_CLK>,
+				 <&mmcc CAMSS_VFE1_STREAM_CLK>,
+				 <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+				 <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
+			clock-names = "ahb",
+				      "cphy_csid0",
+				      "cphy_csid1",
+				      "cphy_csid2",
+				      "cphy_csid3",
+				      "csi0_ahb",
+				      "csi0",
+				      "csi0_phy",
+				      "csi0_pix",
+				      "csi0_rdi",
+				      "csi1_ahb",
+				      "csi1",
+				      "csi1_phy",
+				      "csi1_pix",
+				      "csi1_rdi",
+				      "csi2_ahb",
+				      "csi2",
+				      "csi2_phy",
+				      "csi2_pix",
+				      "csi2_rdi",
+				      "csi3_ahb",
+				      "csi3",
+				      "csi3_phy",
+				      "csi3_pix",
+				      "csi3_rdi",
+				      "csiphy0_timer",
+				      "csiphy1_timer",
+				      "csiphy2_timer",
+				      "csiphy_ahb2crif",
+				      "csi_vfe0",
+				      "csi_vfe1",
+				      "ispif_ahb",
+				      "throttle_axi",
+				      "top_ahb",
+				      "vfe0_ahb",
+				      "vfe0",
+				      "vfe0_stream",
+				      "vfe1_ahb",
+				      "vfe1",
+				      "vfe1_stream",
+				      "vfe_ahb",
+				      "vfe_axi";
+			interconnects = <&mnoc 5 &bimc 5>;
+			interconnect-names = "vfe-mem";
+			iommus = <&mmss_smmu 0xc00>,
+				 <&mmss_smmu 0xc01>,
+				 <&mmss_smmu 0xc02>,
+				 <&mmss_smmu 0xc03>;
+			power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+					<&mmcc CAMSS_VFE1_GDSC>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci: cci@ca0c000 {
+			compatible = "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0ca0c000 0x1000>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+
+			assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
+					  <&mmcc CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80800000>, <37500000>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CLK>,
+				 <&mmcc CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci",
+				      "camss_ahb";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			power-domains = <&mmcc CAMSS_TOP_GDSC>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		venus: video-codec@cc00000 {
+			compatible = "qcom,sdm660-venus";
+			reg = <0x0cc00000 0xff000>;
+			clocks = <&mmcc VIDEO_CORE_CLK>,
+				 <&mmcc VIDEO_AHB_CLK>,
+				 <&mmcc VIDEO_AXI_CLK>,
+				 <&mmcc THROTTLE_VIDEO_AXI_CLK>;
+			clock-names = "core", "iface", "bus", "bus_throttle";
+			interconnects = <&gnoc 0 &mnoc 13>,
+					<&mnoc 4 &bimc 5>;
+			interconnect-names = "cpu-cfg", "video-mem";
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&mmss_smmu 0x400>,
+				 <&mmss_smmu 0x401>,
+				 <&mmss_smmu 0x40a>,
+				 <&mmss_smmu 0x407>,
+				 <&mmss_smmu 0x40e>,
+				 <&mmss_smmu 0x40f>,
+				 <&mmss_smmu 0x408>,
+				 <&mmss_smmu 0x409>,
+				 <&mmss_smmu 0x40b>,
+				 <&mmss_smmu 0x40c>,
+				 <&mmss_smmu 0x40d>,
+				 <&mmss_smmu 0x410>,
+				 <&mmss_smmu 0x421>,
+				 <&mmss_smmu 0x428>,
+				 <&mmss_smmu 0x429>,
+				 <&mmss_smmu 0x42b>,
+				 <&mmss_smmu 0x42c>,
+				 <&mmss_smmu 0x42d>,
+				 <&mmss_smmu 0x411>,
+				 <&mmss_smmu 0x431>;
+			memory-region = <&venus_region>;
+			power-domains = <&mmcc VENUS_GDSC>;
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "vcodec0_core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "vcodec0_core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+		};
+
+		mmss_smmu: iommu@cd00000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x0cd00000 0x40000>;
+
+			clocks = <&mmcc MNOC_AHB_CLK>,
+				 <&mmcc BIMC_SMMU_AHB_CLK>,
+				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
+				 <&mmcc BIMC_SMMU_AXI_CLK>;
+			clock-names = "iface-mm", "iface-smmu",
+				      "bus-mm", "bus-smmu";
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		adsp_pil: remoteproc@15700000 {
+			compatible = "qcom,sdm660-adsp-pas";
+			reg = <0x15700000 0x4040>;
+
+			interrupts-extended =
+				<&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+			power-domain-names = "cx";
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+
+				label = "lpass";
+				mboxes = <&apcs_glb 9>;
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&lpass_smmu 1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		gnoc: interconnect@17900000 {
+			compatible = "qcom,sdm660-gnoc";
+			reg = <0x17900000 0xe000>;
+			#interconnect-cells = <1>;
+			/*
+			 * This one apparently features no clocks,
+			 * so let's not mess with the driver needlessly
+			 */
+			clock-names = "bus", "bus_a";
+			clocks = <&xo_board>, <&xo_board>;
+		};
+
+		apcs_glb: mailbox@17911000 {
+			compatible = "qcom,sdm660-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
+			reg = <0x17911000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@17920000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17920000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17921000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17921000 0x1000>,
+					<0x17922000 0x1000>;
+			};
+
+			frame@17923000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17923000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17924000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17924000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17925000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17925000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17926000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17926000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17927000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17927000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17928000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17928000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x17a00000 0x10000>,	   /* GICD */
+				  <0x17b00000 0x100000>;	  /* GICR * 8 */
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		/*
+		 * According to what downstream DTS says,
+		 * the entire power efficient cluster has
+		 * only a single thermal sensor.
+		 */
+
+		pwr-cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				pwr_cluster_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				pwr_cluster_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 0xf08>,
+				 <GIC_PPI 2 0xf08>,
+				 <GIC_PPI 3 0xf08>,
+				 <GIC_PPI 0 0xf08>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
new file mode 100644
index 0000000000..301eca9a4f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "sdm632.dtsi"
+#include "pm8953.dtsi"
+#include "pmi632.dtsi"
+
+/ {
+	model = "Fairphone 3";
+	compatible = "fairphone,fp3", "qcom,sdm632";
+	chassis-type = "handset";
+	qcom,msm-id = <349 0>;
+	qcom,board-id = <8 0x10000>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &uart_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	status = "okay";
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "himax,hx83112b";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,nq310", "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pm8953_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pmi632_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <1240000>;
+		};
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+		pm8953_s5: s5 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1050000>;
+		};
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1175000>;
+		};
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&tlmm {
+	/*
+	 * 0-3: unused but protected by TZ
+	 * 135-138: fingerprint reader (SPI)
+	 */
+	gpio-reserved-ranges = <0 4>, <135 4>;
+};
+
+&uart_0 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
new file mode 100644
index 0000000000..c82d6e628d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Gabriela David
+ */
+/dts-v1/;
+
+#include "sdm632.dtsi"
+#include "pm8953.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Motorola G7 Power";
+	compatible = "motorola,ocean", "qcom,sdm632";
+	chassis-type = "handset";
+	qcom,msm-id = <349 0>;
+	qcom,board-id = <0x141 0xc100>;
+	qcom,pmic-id = <0x10016 0x25 0x00 0x00>;
+
+	backlight: backlight {
+		compatible = "led-backlight";
+		leds = <&led>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (720 * 1520 * 3)>;
+
+			width = <720>;
+			height = <1520>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84300000 {
+			reg = <0x0 0x84300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>;
+			no-map;
+		};
+
+		reserved@eefa1800 {
+			reg = <0x00 0xeefa1800 0x00 0x5e800>;
+			no-map;
+		};
+
+		ramoops@ef000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xef000000 0x0 0xbf800>;
+			console-size = <0x40000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x3f800>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "ilitek,ili2117";
+		reg = <0x41>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-inverted-x;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	led-controller@36 {
+		compatible = "ti,lm3697";
+		reg = <0x36>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led: led@1 {
+			reg = <1>;
+			default-trigger = "backlight";
+			function = LED_FUNCTION_BACKLIGHT;
+			led-sources = <0 1 2>;
+		};
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <1240000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1175000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l18: l18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <96 4>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi
new file mode 100644
index 0000000000..645b9f6a80
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include "msm8953.dtsi"
+
+/ {
+	thermal-zones {
+		/delete-node/cpu1-thermal;
+		/delete-node/cpu2-thermal;
+		/delete-node/cpu3-thermal;
+
+		cpu0-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			thermal-sensors = <&tsens0 5>;
+		};
+
+		cpu5-thermal {
+			thermal-sensors = <&tsens0 6>;
+		};
+
+		cpu6-thermal {
+			thermal-sensors = <&tsens0 7>;
+		};
+
+		cpu7-thermal {
+			thermal-sensors = <&tsens0 8>;
+		};
+	};
+};
+
+/*
+ * SDM632 uses Kryo 250 instead of Cortex A53
+ * CPU0-3 are efficiency cores, CPU4-7 are performance cores
+ */
+&CPU0 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU1 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU2 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU3 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU4 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
+
+&CPU5 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
+
+&CPU6 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
+
+&CPU7 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
new file mode 100644
index 0000000000..9702e5f59a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-ganges-kirin.dts"
+#include "sdm636.dtsi"
+
+/ {
+	model = "Sony Xperia 10 Plus";
+	compatible = "sony,mermaid-row", "qcom,sdm636";
+	chassis-type = "handset";
+
+	/* SDM636 v1 */
+	qcom,msm-id = <345 0>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>;
+};
+
+&sdc2_state_on {
+	clk-pins {
+		drive-strength = <14>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm636.dtsi b/arch/arm64/boot/dts/qcom/sdm636.dtsi
new file mode 100644
index 0000000000..ae15d81fa3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm636.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com>
+ */
+
+#include "sdm660.dtsi"
+
+/*
+ * According to the downstream DTS,
+ * 636 is basically a 660 except for
+ * different CPU frequencies, Adreno
+ * 509 instead of 512 and lack of
+ * turing IP. These differences will
+ * be addressed when the aforementioned
+ * peripherals will be enabled upstream.
+ */
+
+&adreno_gpu {
+	compatible = "qcom,adreno-509.0", "qcom,adreno";
+	/* Adreno 509 shares the frequency table with 512 */
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
new file mode 100644
index 0000000000..3c47410ba9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
+ * Copyright (c) 2021, Dang Huynh <danct12@riseup.net>
+ */
+
+/dts-v1/;
+
+#include "sdm660.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Xiaomi Redmi Note 7";
+	compatible = "xiaomi,lavender", "qcom,sdm660";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (1080 * 2340 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volup {
+			label = "Volume Up";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xa0000000 0x0 0x400000>;
+			console-size = <0x20000>;
+			record-size = <0x20000>;
+			ftrace-size = <0x0>;
+			pmsg-size = <0x20000>;
+		};
+
+		framebuffer_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x23ff000>;
+			no-map;
+		};
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qusb2phy0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm660l-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+		vdd_l2-supply = <&vreg_bob>;
+		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+		vdd_l4_l6-supply = <&vreg_bob>;
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_s1b_1p125: s1 {
+			regulator-min-microvolt = <1125000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s2b_1p05: s2 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		/* LDOs */
+		vreg_l1b_0p925: l1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <925000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		/* SDHCI 3.3V signal doesn't seem to be supported. */
+		vreg_l2b_2p95: l2 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3b_3p3: l3 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l4b_2p95: l4 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		/*
+		 * Downstream specifies a range of 1721-3600mV,
+		 * but the only assigned consumers are SDHCI2 VMMC
+		 * and Coresight QPDI that both request pinned 2.95V.
+		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
+		 * make the mmc driver happy.
+		 */
+		vreg_l5b_2p95: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l7b_3p125: l7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3125000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8b_3p3: l8 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-enable-ramp-delay = <500>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm660-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+		vdd_l5-supply = <&vreg_s2b_1p05>;
+		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: s4 {
+			regulator-min-microvolt = <1805000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_1p35: s5 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s6a_0p87: s6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <992000>;
+			regulator-enable-ramp-delay = <150>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: l1 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p0: l2 {
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1010000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1010000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5a_0p848: l5 {
+			regulator-min-microvolt = <525000>;
+			regulator-max-microvolt = <950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6a_1p3: l6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1370000>;
+			regulator-allow-set-load;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7a_1p2: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a_1p8: l11 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		/* This gives power to the LPDDR4: never turn it off! */
+		vreg_l13a_1p8: l13 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-always-on;
+		};
+
+		vreg_l17a_1p8: l17 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&pm660l_wled {
+	status = "okay";
+
+	qcom,switching-freq = <800>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,num-strings = <2>;
+};
+
+&sdc2_state_on {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&sdc2_state_off {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	supports-cqe;
+
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l5b_2p95>;
+	vqmmc-supply = <&vreg_l2b_2p95>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <8 4>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
new file mode 100644
index 0000000000..f89b27c99f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2018, Craig Tatlor.
+ * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com>
+ */
+
+#include "sdm630.dtsi"
+
+&adreno_gpu {
+	compatible = "qcom,adreno-512.0", "qcom,adreno";
+	operating-points-v2 = <&gpu_sdm660_opp_table>;
+
+	gpu_sdm660_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * 775MHz is only available on the highest speed bin
+		 * Though it cannot be used for now due to interconnect
+		 * framework not supporting multiple frequencies
+		 * at the same opp-level
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+			opp-level = <RPM_SMD_LEVEL_TURBO>;
+			opp-peak-kBps = <5412000>;
+			opp-supported-hw = <0xCHECKME>;
+		};
+
+		* These OPPs are correct, but we are lacking support for the
+		* GPU regulator. Hence, disable them for now to prevent the
+		* platform from hanging on high graphics loads.
+
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-level = <RPM_SMD_LEVEL_TURBO>;
+			opp-peak-kBps = <5184000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-647000000 {
+			opp-hz = /bits/ 64 <647000000>;
+			opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+			opp-peak-kBps = <4068000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-588000000 {
+			opp-hz = /bits/ 64 <588000000>;
+			opp-level = <RPM_SMD_LEVEL_NOM>;
+			opp-peak-kBps = <3072000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-465000000 {
+			opp-hz = /bits/ 64 <465000000>;
+			opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+			opp-peak-kBps = <2724000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-370000000 {
+			opp-hz = /bits/ 64 <370000000>;
+			opp-level = <RPM_SMD_LEVEL_SVS>;
+			opp-peak-kBps = <2188000>;
+			opp-supported-hw = <0xff>;
+		};
+		*/
+
+		opp-266000000 {
+			opp-hz = /bits/ 64 <266000000>;
+			opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+			opp-peak-kBps = <1648000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+			opp-peak-kBps = <1200000>;
+			opp-supported-hw = <0xff>;
+		};
+	};
+};
+
+&CPU0 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <1024>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU1 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <1024>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU2 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <1024>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU3 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <1024>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU4 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <640>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU5 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <640>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU6 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <640>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU7 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <640>;
+	/delete-property/ operating-points-v2;
+};
+
+&gcc {
+	compatible = "qcom,gcc-sdm660";
+};
+
+&gpucc {
+	compatible = "qcom,gpucc-sdm660";
+};
+
+&mdp {
+	compatible = "qcom,sdm660-mdp5", "qcom,mdp5";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdp5_intf2_out: endpoint {
+				remote-endpoint = <&mdss_dsi1_in>;
+			};
+		};
+	};
+};
+
+&mdss {
+	mdss_dsi1: dsi@c996000 {
+		compatible = "qcom,sdm660-dsi-ctrl",
+			     "qcom,mdss-dsi-ctrl";
+		reg = <0x0c996000 0x400>;
+		reg-names = "dsi_ctrl";
+
+		/* DSI1 shares the OPP table with DSI0 */
+		operating-points-v2 = <&dsi_opp_table>;
+		power-domains = <&rpmpd SDM660_VDDCX>;
+
+		interrupt-parent = <&mdss>;
+		interrupts = <5>;
+
+		assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+					<&mmcc PCLK1_CLK_SRC>;
+		assigned-clock-parents = <&mdss_dsi1_phy 0>,
+						<&mdss_dsi1_phy 1>;
+
+		clocks = <&mmcc MDSS_MDP_CLK>,
+				<&mmcc MDSS_BYTE1_CLK>,
+				<&mmcc MDSS_BYTE1_INTF_CLK>,
+				<&mmcc MNOC_AHB_CLK>,
+				<&mmcc MDSS_AHB_CLK>,
+				<&mmcc MDSS_AXI_CLK>,
+				<&mmcc MISC_AHB_CLK>,
+				<&mmcc MDSS_PCLK1_CLK>,
+				<&mmcc MDSS_ESC1_CLK>;
+		clock-names = "mdp_core",
+					"byte",
+					"byte_intf",
+					"mnoc",
+					"iface",
+					"bus",
+					"core_mmss",
+					"pixel",
+					"core";
+
+		phys = <&mdss_dsi1_phy>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				mdss_dsi1_in: endpoint {
+					remote-endpoint = <&mdp5_intf2_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				mdss_dsi1_out: endpoint {
+				};
+			};
+		};
+	};
+
+	mdss_dsi1_phy: phy@c996400 {
+		compatible = "qcom,dsi-phy-14nm-660";
+		reg = <0x0c996400 0x100>,
+				<0x0c996500 0x300>,
+				<0x0c996800 0x188>;
+		reg-names = "dsi_phy",
+				"dsi_phy_lane",
+				"dsi_pll";
+
+		#clock-cells = <1>;
+		#phy-cells = <0>;
+
+		clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+		clock-names = "iface", "ref";
+		status = "disabled";
+	};
+};
+
+&mmcc {
+	compatible = "qcom,mmcc-sdm660";
+	clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+			<&sleep_clk>,
+			<&gcc GCC_MMSS_GPLL0_CLK>,
+			<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
+			<&mdss_dsi0_phy 1>,
+			<&mdss_dsi0_phy 0>,
+			<&mdss_dsi1_phy 1>,
+			<&mdss_dsi1_phy 0>,
+			<0>,
+			<0>;
+};
+
+&tlmm {
+	compatible = "qcom,sdm660-pinctrl";
+};
+
+&tsens {
+	#qcom,sensors = <14>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
new file mode 100644
index 0000000000..32a7bd59e1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Google Pixel 3a, adapted from google-blueline device tree,
+ * xiaomi-lavender device tree, and oneplus-common device tree.
+ *
+ * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include "sdm670.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &adsp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+
+/ {
+	model = "Google Pixel 3a";
+	compatible = "google,sargo", "qcom,sdm670";
+
+	aliases { };
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
+			width = <1080>;
+			height = <2220>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		mpss_region: mpss@8b000000 {
+			reg = <0 0x8b000000 0 0x9800000>;
+			no-map;
+		};
+
+		venus_mem: venus@94800000 {
+			reg = <0 0x94800000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@94d00000 {
+			reg = <0 0x94d00000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@94e00000 {
+			reg = <0 0x94e00000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@95600000 {
+			reg = <0 0x95600000 0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@95800000 {
+			reg = <0 0x95800000 0 0x2200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@97a00000 {
+			reg = <0 0x97a00000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@97a10000 {
+			reg = <0 0x97a10000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@97a15000 {
+			reg = <0 0x97a15000 0 0x2000>;
+			no-map;
+		};
+
+		framebuffer-region@9c000000 {
+			reg = <0 0x9c000000 0 0x2400000>;
+			no-map;
+		};
+
+		/* Also includes ramoops regions */
+		debug_info_mem: debug-info@a1800000 {
+			reg = <0 0xa1800000 0 0x411000>;
+			no-map;
+		};
+	};
+
+	/*
+	 * The touchscreen regulator seems to be controlled somehow by a gpio.
+	 * Model it as a fixed regulator and keep it on. Without schematics we
+	 * don't know how this is actually wired up...
+	 */
+	ts_1p8_supply: ts-1p8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_1p8_supply";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3312000>;
+		regulator-max-microvolt = <3312000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * Supply map from xiaomi-lavender specifies this as the supply for
+	 * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies
+	 * this as a power domain. Set this as a fixed regulator with the same
+	 * voltage as lavender until display is needed to avoid unneccessarily
+	 * using a deprecated binding (regulator-fixed-domain).
+	 */
+	vreg_s2b_1p05: vreg-s2b-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s2b";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm660-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>;
+		vdd-l2-l3-supply = <&vreg_s2b_1p05>;
+		vdd-l5-supply = <&vreg_s2b_1p05>;
+		vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>;
+		vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: smps4 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s6a_0p87: smps6 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-enable-ramp-delay = <150>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5a_0p848: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6a_1p3: ldo6 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7a_1p2: ldo7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8a_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-always-on;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l17a_1p8: ldo17 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l19a_3p3: ldo19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm660l-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>;
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-l5-l7-l8-supply = <&vreg_bob>;
+		vdd-l4-l6-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		/* LDOs */
+		vreg_l1b_0p925: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <900000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l2b_2p95: ldo2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3b_3p0: ldo3 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l4b_2p95: ldo4 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5b_2p95: ldo5 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6b_3p3: ldo6 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7b_3p125: ldo7 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8b_3p3: ldo8 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		/*
+		 * Downstream specifies a fixed voltage of 3.312 V, but the
+		 * PMIC4 BOB ranges don't support that. Widen the range a
+		 * little to avoid adding a new BOB regulator type.
+		 */
+		vreg_bob: bob {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <500>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c9 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	synaptics-rmi4-i2c@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+
+		vio-supply = <&ts_1p8_supply>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <62>;
+			touchscreen-y-mm = <127>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&pm660l_gpios {
+	vol_up_pin: vol-up-state {
+		pins = "gpio7";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	supports-cqe;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-ddr-1_8v;
+
+	qcom,ddr-config = <0xc3040873>;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	touchscreen_default: ts-default-state {
+		ts-reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+
+		ts-irq-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		ts-switch-pins {
+			pins = "gpio135";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-low;
+		};
+	};
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Only peripheral works for now */
+	dr_mode = "peripheral";
+
+	/* Do not assume that sdm670.dtsi will never support USB 3.0 */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+	maximum-speed = "high-speed";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
new file mode 100644
index 0000000000..730c8351bc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -0,0 +1,1545 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM670 SoC device tree source, adapted from SDM845 SoC device tree
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases { };
+
+	chosen { };
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+				cache-level = <2>;
+				cache-unified;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <393>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <393>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <1617>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <2380>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9825>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdm670", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu0_opp2: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu0_opp3: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp4: opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+			opp-peak-kBps = <1804000 8908800>;
+		};
+
+		cpu0_opp5: opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu0_opp6: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 13516800>;
+		};
+
+		cpu0_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp8: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 22118400>;
+		};
+
+		cpu0_opp9: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 23040000>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu6_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu6_opp2: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu6_opp3: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu6_opp4: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu6_opp5: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp6: opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp7: opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp8: opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp9: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp10: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <6220000 19046400>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp-mem@85700000 {
+			reg = <0 0x85700000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: xbl-mem@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		aop_mem: aop-mem@85fc0000 {
+			reg = <0 0x85fc0000 0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x85fe0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera-mem@8ab00000 {
+			reg = <0 0x8ab00000 0 0x500000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8b000000 {
+			reg = <0 0x8b000000 0 0x7e00000>;
+			no-map;
+		};
+
+		venus_mem: venus@92e00000 {
+			reg = <0 0x92e00000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@93300000 {
+			reg = <0 0x93300000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@93400000 {
+			reg = <0 0x93400000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@93c00000 {
+			reg = <0 0x93c00000 0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@93e00000 {
+			reg = <0 0x93e00000 0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@95c00000 {
+			reg = <0 0x95c00000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@95c10000 {
+			reg = <0 0x95c10000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@95c15000 {
+			reg = <0 0x95c15000 0 0x2000>;
+			no-map;
+		};
+
+		spss_mem: spss@97b00000 {
+			reg = <0 0x97b00000 0 0x100000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom@9e400000 {
+			reg = <0 0x9e400000 0 0x1400000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm670";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		qfprom: qfprom@784000 {
+			compatible = "qcom,sdm670-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@1eb {
+				reg = <0x1eb 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x007c4000 0 0x1000>,
+			      <0 0x007c5000 0 0x1000>,
+			      <0 0x007c8000 0 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
+			clock-names = "iface", "core", "xo", "ice", "bus";
+			interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>,
+					<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			iommus = <&apps_smmu 0x140 0xf>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			power-domains = <&rpmhpd SDM670_CX>;
+
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-20000000 {
+					opp-hz = /bits/ 64 <20000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+					opp-peak-kBps = <80000 80000>;
+					opp-avg-kBps = <52286 80000>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <200000 100000>;
+					opp-avg-kBps = <130718 100000>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <200000 130000>;
+					opp-avg-kBps = <130718 130000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x16 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>;
+			interconnect-names = "qup-core";
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x6d6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x6c3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>;
+			interconnect-names = "qup-core";
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		mem_noc: interconnect@1380000 {
+			compatible = "qcom,sdm670-mem-noc";
+			reg = <0 0x01380000 0 0x27200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		dc_noc: interconnect@14e0000 {
+			compatible = "qcom,sdm670-dc-noc";
+			reg = <0 0x014e0000 0 0x400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sdm670-config-noc";
+			reg = <0 0x01500000 0 0x5080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdm670-system-noc";
+			reg = <0 0x01620000 0 0x18080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sdm670-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sdm670-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f300>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sdm670-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tlmm: pinctrl@3400000 {
+			compatible = "qcom,sdm670-tlmm";
+			reg = <0 0x03400000 0 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio17", "gpio18";
+				function = "qup1";
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup2";
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio41", "gpio42";
+				function = "qup3";
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio89", "gpio90";
+				function = "qup4";
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio85", "gpio86";
+				function = "qup5";
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup6";
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio93", "gpio94";
+				function = "qup7";
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio65", "gpio66";
+				function = "qup8";
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup9";
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup10";
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio31", "gpio32";
+				function = "qup11";
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio49", "gpio50";
+				function = "qup12";
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio105", "gpio106";
+				function = "qup13";
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio33", "gpio34";
+				function = "qup14";
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio81", "gpio82";
+				function = "qup15";
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sdm670-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sdm670-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x740 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sdm670-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 40>, <41 521 7>, <49 529 4>,
+					  <54 534 24>, <79 559 15>, <94 609 15>,
+					  <115 630 7>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gladiator_noc: interconnect@17900000 {
+			compatible = "qcom,sdm670-gladiator-noc";
+			reg = <0 0x17900000 0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		apps_rsc: rsc@179c0000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x179c0000 0 0x10000>,
+			      <0 0x179d0000 0 0x10000>,
+			      <0 0x179e0000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdm670-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdm670-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+		};
+
+		osm_l3: interconnect@17d41000 {
+			compatible = "qcom,sdm670-osm-l3", "qcom,osm-l3";
+			reg = <0 0x17d41000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@17d43000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
new file mode 100644
index 0000000000..bd7c25bb8d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+	model = "Google Cheza (rev1)";
+	compatible = "google,cheza-rev1", "qcom,sdm845";
+
+	/*
+	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
+	 */
+
+	/*
+	 * NOTE: Technically pp3500_a is not the exact same signal as
+	 * pp3500_a_vbob (there's a load switch between them and the EC can
+	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
+	 * view they are the same.
+	 */
+	pp3500_a:
+	pp3500_a_vbob: pp3500-a-vbob-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob";
+
+		/*
+		 * Comes on automatically when pp5000_ldo comes on, which
+		 * comes on automatically when ppvar_sys comes on
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_dx_edp: pp3300-dx-edp-regulator {
+		/* Yes, it's really 3.5 despite the name of the signal */
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&pp3500_a>;
+	};
+};
+
+/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
+
+/*
+ * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
+ * that limits them to 3.0, and trying to run at 3.3V with that old firmware
+ * prevents the system from booting.
+ */
+&src_pp3000_l19a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_pp3300_l22a {
+	/delete-property/regulator-boot-on;
+	/delete-property/regulator-always-on;
+};
+
+&src_pp3300_l28a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_vreg_bob {
+	regulator-min-microvolt = <3500000>;
+	regulator-max-microvolt = <3500000>;
+	vin-supply = <&pp3500_a_vbob>;
+};
+
+/*
+ * NON-REGULATOR OVERRIDES
+ * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
+ */
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "FP_RST_L",
+			  "FCAM_EN",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "EC_IN_RW_ODL",
+			  "",
+			  "RCAM_MCLK",
+			  "FCAM_MCLK",
+			  "",
+			  "RCAM_EN",
+			  "CCI0_SDA",
+			  "CCI0_SCL",
+			  "CCI1_SDA",
+			  "CCI1_SCL",
+			  "FCAM_RST_L",
+			  "",
+			  "PEN_RST_L",
+			  "PEN_IRQ_L",
+			  "",
+			  "RCAM_VSYNC",
+			  "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "AP_PEN_1V8_SDA",
+			  "AP_PEN_1V8_SCL",
+			  "AP_TS_I2C_SDA",
+			  "AP_TS_I2C_SCL",
+			  "RCAM_RST_L",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "AP_BRD_ID1",
+			  "BOOT_CONFIG_4",
+			  "AMP_IRQ_L",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "EN_PP3300_DX_EDP",
+			  "SD_CD_ODL",
+			  "BT_UART_RTS",
+			  "BT_UART_CTS",
+			  "BT_UART_RXD",
+			  "BT_UART_TXD",
+			  "AMP_I2C_SDA",
+			  "AMP_I2C_SCL",
+			  "AP_BRD_ID3",
+			  "",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DOUT",
+			  "AMP_DIN",
+			  "AP_BRD_ID2",
+			  "PEN_PDCT_L",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "BT_SLIMBUS_DATA",
+			  "BT_SLIMBUS_CLK",
+			  "AMP_RESET_L",
+			  "",
+			  "FCAM_VSYNC",
+			  "",
+			  "AP_SKU_ID1",
+			  "EC_WOV_BCLK",
+			  "EC_WOV_LRCLK",
+			  "EC_WOV_DOUT",
+			  "",
+			  "",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  "",
+			  "",
+			  "AP_SPI_CLK",
+			  "",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "BOOT_CONFIG_1",
+			  "BOOT_CONFIG_2",
+			  "BOOT_CONFIG_0",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "USB_HS_TX_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "AP_SKU_ID2",
+			  "SDM_GRFC_8",
+			  "SDM_GRFC_9",
+			  "AP_RST_REQ",
+			  "HP_IRQ",
+			  "TS_RESET_L",
+			  "PEN_EJECT_ODL",
+			  "HUB_RST_L",
+			  "FP_TO_AP_IRQ",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "TS_INT_L",
+			  "AP_SUSPEND_L",
+			  "SDM_GRFC_3",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "QLINK_REQ",
+			  "QLINK_EN",
+			  "SDM_GRFC_2",
+			  "BOOT_CONFIG_3",
+			  "WMSS_RESET_L",
+			  "SDM_GRFC_0",
+			  "SDM_GRFC_1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK",
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "WCI2_LTE_COEX_RXD",
+			  "WCI2_LTE_COEX_TXD",
+			  "AP_RAM_ID1",
+			  "AP_RAM_ID2",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
new file mode 100644
index 0000000000..2b7230594e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+	model = "Google Cheza (rev2)";
+	compatible = "google,cheza-rev2", "qcom,sdm845";
+
+	/*
+	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
+	 */
+
+	/*
+	 * NOTE: Technically pp3500_a is not the exact same signal as
+	 * pp3500_a_vbob (there's a load switch between them and the EC can
+	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
+	 * view they are the same.
+	 */
+	pp3500_a:
+	pp3500_a_vbob: pp3500-a-vbob-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob";
+
+		/*
+		 * Comes on automatically when pp5000_ldo comes on, which
+		 * comes on automatically when ppvar_sys comes on
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_dx_edp: pp3300-dx-edp-regulator {
+		/* Yes, it's really 3.5 despite the name of the signal */
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&pp3500_a>;
+	};
+};
+
+/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
+
+/*
+ * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
+ * that limits them to 3.0, and trying to run at 3.3V with that old firmware
+ * prevents the system from booting.
+ */
+&src_pp3000_l19a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_pp3300_l22a {
+	/delete-property/regulator-boot-on;
+	/delete-property/regulator-always-on;
+};
+
+&src_pp3300_l28a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_vreg_bob {
+	regulator-min-microvolt = <3500000>;
+	regulator-max-microvolt = <3500000>;
+	vin-supply = <&pp3500_a_vbob>;
+};
+
+/*
+ * NON-REGULATOR OVERRIDES
+ * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
+ */
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "BRIJ_SUSPEND",
+			  "FP_RST_L",
+			  "FCAM_EN",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "EC_IN_RW_ODL",
+			  "",
+			  "RCAM_MCLK",
+			  "FCAM_MCLK",
+			  "",
+			  "RCAM_EN",
+			  "CCI0_SDA",
+			  "CCI0_SCL",
+			  "CCI1_SDA",
+			  "CCI1_SCL",
+			  "FCAM_RST_L",
+			  "FPMCU_BOOT0",
+			  "PEN_RST_L",
+			  "PEN_IRQ_L",
+			  "FPMCU_SEL_OD",
+			  "RCAM_VSYNC",
+			  "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "AP_PEN_1V8_SDA",
+			  "AP_PEN_1V8_SCL",
+			  "AP_TS_I2C_SDA",
+			  "AP_TS_I2C_SCL",
+			  "RCAM_RST_L",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "AP_BRD_ID1",
+			  "BOOT_CONFIG_4",
+			  "AMP_IRQ_L",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "EN_PP3300_DX_EDP",
+			  "SD_CD_ODL",
+			  "BT_UART_RTS",
+			  "BT_UART_CTS",
+			  "BT_UART_RXD",
+			  "BT_UART_TXD",
+			  "AMP_I2C_SDA",
+			  "AMP_I2C_SCL",
+			  "AP_BRD_ID3",
+			  "",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DOUT",
+			  "AMP_DIN",
+			  "AP_BRD_ID2",
+			  "PEN_PDCT_L",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "BT_SLIMBUS_DATA",
+			  "BT_SLIMBUS_CLK",
+			  "AMP_RESET_L",
+			  "",
+			  "FCAM_VSYNC",
+			  "",
+			  "AP_SKU_ID1",
+			  "EC_WOV_BCLK",
+			  "EC_WOV_LRCLK",
+			  "EC_WOV_DOUT",
+			  "",
+			  "",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  "",
+			  "",
+			  "AP_SPI_CLK",
+			  "",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "BOOT_CONFIG_1",
+			  "BOOT_CONFIG_2",
+			  "BOOT_CONFIG_0",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "USB_HS_TX_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "AP_SKU_ID2",
+			  "SDM_GRFC_8",
+			  "SDM_GRFC_9",
+			  "AP_RST_REQ",
+			  "HP_IRQ",
+			  "TS_RESET_L",
+			  "PEN_EJECT_ODL",
+			  "HUB_RST_L",
+			  "FP_TO_AP_IRQ",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "TS_INT_L",
+			  "AP_SUSPEND_L",
+			  "SDM_GRFC_3",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "QLINK_REQ",
+			  "QLINK_EN",
+			  "SDM_GRFC_2",
+			  "BOOT_CONFIG_3",
+			  "WMSS_RESET_L",
+			  "SDM_GRFC_0",
+			  "SDM_GRFC_1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK",
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "WCI2_LTE_COEX_RXD",
+			  "WCI2_LTE_COEX_TXD",
+			  "AP_RAM_ID1",
+			  "AP_RAM_ID2",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
new file mode 100644
index 0000000000..1ba67be08f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+	model = "Google Cheza (rev3+)";
+	compatible = "google,cheza", "qcom,sdm845";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "BRIJ_SUSPEND",
+			  "FP_RST_L",
+			  "FCAM_EN",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "EC_IN_RW_ODL",
+			  "",
+			  "RCAM_MCLK",
+			  "FCAM_MCLK",
+			  "",
+			  "RCAM_EN",
+			  "CCI0_SDA",
+			  "CCI0_SCL",
+			  "CCI1_SDA",
+			  "CCI1_SCL",
+			  "FCAM_RST_L",
+			  "FPMCU_BOOT0",
+			  "PEN_RST_L",
+			  "PEN_IRQ_L",
+			  "FPMCU_SEL_OD",
+			  "RCAM_VSYNC",
+			  "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "AP_PEN_1V8_SDA",
+			  "AP_PEN_1V8_SCL",
+			  "AP_TS_I2C_SDA",
+			  "AP_TS_I2C_SCL",
+			  "RCAM_RST_L",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "AP_BRD_ID0",
+			  "BOOT_CONFIG_4",
+			  "AMP_IRQ_L",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "EN_PP3300_DX_EDP",
+			  "SD_CD_ODL",
+			  "BT_UART_RTS",
+			  "BT_UART_CTS",
+			  "BT_UART_RXD",
+			  "BT_UART_TXD",
+			  "AMP_I2C_SDA",
+			  "AMP_I2C_SCL",
+			  "AP_BRD_ID2",
+			  "",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DOUT",
+			  "AMP_DIN",
+			  "AP_BRD_ID1",
+			  "PEN_PDCT_L",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "BT_SLIMBUS_DATA",
+			  "BT_SLIMBUS_CLK",
+			  "AMP_RESET_L",
+			  "",
+			  "FCAM_VSYNC",
+			  "",
+			  "AP_SKU_ID0",
+			  "EC_WOV_BCLK",
+			  "EC_WOV_LRCLK",
+			  "EC_WOV_DOUT",
+			  "",
+			  "",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  "",
+			  "",
+			  "AP_SPI_CLK",
+			  "",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "BOOT_CONFIG_1",
+			  "BOOT_CONFIG_2",
+			  "BOOT_CONFIG_0",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "USB_HS_TX_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "AP_SKU_ID1",
+			  "SDM_GRFC_8",
+			  "SDM_GRFC_9",
+			  "AP_RST_REQ",
+			  "HP_IRQ",
+			  "TS_RESET_L",
+			  "PEN_EJECT_ODL",
+			  "HUB_RST_L",
+			  "FP_TO_AP_IRQ",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "TS_INT_L",
+			  "AP_SUSPEND_L",
+			  "SDM_GRFC_3",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics
+			   * call it BIOS_FLASH_WP_R_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "H1_AP_INT_ODL",
+			  "QLINK_REQ",
+			  "QLINK_EN",
+			  "SDM_GRFC_2",
+			  "BOOT_CONFIG_3",
+			  "WMSS_RESET_L",
+			  "SDM_GRFC_0",
+			  "SDM_GRFC_1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK",
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "WCI2_LTE_COEX_RXD",
+			  "WCI2_LTE_COEX_TXD",
+			  "AP_RAM_ID0",
+			  "AP_RAM_ID1",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
new file mode 100644
index 0000000000..0ab5e8f53a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -0,0 +1,1333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza device tree source (common between revisions)
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial1 = &uart6;
+		serial0 = &uart9;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&cros_ec_pwm 0>;
+		enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		power-supply = <&ppvar_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_edp_bklten>;
+	};
+
+	/* FIXED REGULATORS - parents above children */
+
+	/* This is the top level supply and variable voltage */
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This divides ppvar_sys by 2, so voltage is variable */
+	src_vph_pwr: src-vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vph_pwr";
+
+		/* EC turns on with switchcap_on_l; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_a: pp5000-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_a";
+
+		/* EC turns on with en_pp5000_a; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	src_vreg_bob: src-vreg-bob-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vreg_bob";
+
+		/* EC turns on with vbob_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_dx_edp: pp3300-dx-edp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_dx_edp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_dx_edp>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	src_pp1800_s4a: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "src_pp1800_s4a";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&src_vph_pwr>;
+	};
+
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_eject_odl>;
+
+		switch-pen-insert {
+			label = "Pen Insert";
+			/* Insert = low, eject = high */
+			gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,p120zdg-bf1";
+		power-supply = <&pp3300_dx_edp>;
+		backlight = <&backlight>;
+		no-hpd;
+
+		panel_in: port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+};
+
+&cpufreq_hw {
+	/delete-property/ interrupts-extended; /* reference to lmh_cluster[01] */
+};
+
+&psci {
+	/delete-node/ power-domain-cpu0;
+	/delete-node/ power-domain-cpu1;
+	/delete-node/ power-domain-cpu2;
+	/delete-node/ power-domain-cpu3;
+	/delete-node/ power-domain-cpu4;
+	/delete-node/ power-domain-cpu5;
+	/delete-node/ power-domain-cpu6;
+	/delete-node/ power-domain-cpu7;
+	/delete-node/ power-domain-cluster;
+};
+
+&cpus {
+	/delete-node/ domain-idle-states;
+};
+
+&cpu_idle_states {
+	LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+		compatible = "arm,idle-state";
+		idle-state-name = "little-power-down";
+		arm,psci-suspend-param = <0x40000003>;
+		entry-latency-us = <350>;
+		exit-latency-us = <461>;
+		min-residency-us = <1890>;
+		local-timer-stop;
+	};
+
+	LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+		compatible = "arm,idle-state";
+		idle-state-name = "little-rail-power-down";
+		arm,psci-suspend-param = <0x40000004>;
+		entry-latency-us = <360>;
+		exit-latency-us = <531>;
+		min-residency-us = <3934>;
+		local-timer-stop;
+	};
+
+	BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+		compatible = "arm,idle-state";
+		idle-state-name = "big-power-down";
+		arm,psci-suspend-param = <0x40000003>;
+		entry-latency-us = <264>;
+		exit-latency-us = <621>;
+		min-residency-us = <952>;
+		local-timer-stop;
+	};
+
+	BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+		compatible = "arm,idle-state";
+		idle-state-name = "big-rail-power-down";
+		arm,psci-suspend-param = <0x40000004>;
+		entry-latency-us = <702>;
+		exit-latency-us = <1061>;
+		min-residency-us = <4488>;
+		local-timer-stop;
+	};
+
+	CLUSTER_SLEEP_0: cluster-sleep-0 {
+		compatible = "arm,idle-state";
+		idle-state-name = "cluster-power-down";
+		arm,psci-suspend-param = <0x400000F4>;
+		entry-latency-us = <3263>;
+		exit-latency-us = <6562>;
+		min-residency-us = <9987>;
+		local-timer-stop;
+	};
+};
+
+&CPU0 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU1 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU2 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU3 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU4 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU5 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU6 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU7 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&lmh_cluster0 {
+	status = "disabled";
+};
+
+&lmh_cluster1 {
+	status = "disabled";
+};
+
+/*
+ * Reserved memory changes
+ *
+ * Putting this all together (out of order with the rest of the file) to keep
+ * all modifications to the memory map (from sdm845.dtsi) in one place.
+ */
+
+/*
+ * Our mpss_region is 8MB bigger than the default one and that conflicts
+ * with venus_mem and cdsp_mem.
+ *
+ * For venus_mem we'll delete and re-create at a different address.
+ *
+ * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but
+ * that also means we need to delete cdsp_pas.
+ */
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &cdsp_pas;
+/delete-node/ &gpu_mem;
+
+/* Increase the size from 120 MB to 128 MB */
+&mpss_region {
+	reg = <0 0x8e000000 0 0x8000000>;
+};
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+	reg = <0 0x88f00000 0 0x800000>;
+};
+
+/ {
+	reserved-memory {
+		venus_mem: memory@96000000 {
+			reg = <0 0x96000000 0 0x500000>;
+			no-map;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+	pinctrl-1 = <&qspi_sleep>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		/*
+		 * In theory chip supports up to 104 MHz and controller up
+		 * to 80 MHz, but above 25 MHz wasn't reliable so we'll use
+		 * that for now.  b:117440651
+		 */
+		spi-max-frequency = <25000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+
+&apps_rsc {
+	/delete-property/ power-domains;
+
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&src_vph_pwr>;
+		vdd-s2-supply = <&src_vph_pwr>;
+		vdd-s3-supply = <&src_vph_pwr>;
+		vdd-s4-supply = <&src_vph_pwr>;
+		vdd-s5-supply = <&src_vph_pwr>;
+		vdd-s6-supply = <&src_vph_pwr>;
+		vdd-s7-supply = <&src_vph_pwr>;
+		vdd-s8-supply = <&src_vph_pwr>;
+		vdd-s9-supply = <&src_vph_pwr>;
+		vdd-s10-supply = <&src_vph_pwr>;
+		vdd-s11-supply = <&src_vph_pwr>;
+		vdd-s12-supply = <&src_vph_pwr>;
+		vdd-s13-supply = <&src_vph_pwr>;
+		vdd-l1-l27-supply = <&src_pp1025_s7a>;
+		vdd-l2-l8-l17-supply = <&src_pp1350_s3a>;
+		vdd-l3-l11-supply = <&src_pp1025_s7a>;
+		vdd-l4-l5-supply = <&src_pp1025_s7a>;
+		vdd-l6-supply = <&src_vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>;
+		vdd-l9-supply = <&src_pp2040_s5a>;
+		vdd-l10-l23-l25-supply = <&src_vreg_bob>;
+		vdd-l13-l19-l21-supply = <&src_vreg_bob>;
+		vdd-l16-l28-supply = <&src_vreg_bob>;
+		vdd-l18-l22-supply = <&src_vreg_bob>;
+		vdd-l20-l24-supply = <&src_vreg_bob>;
+		vdd-l26-supply = <&src_pp1350_s3a>;
+		vin-lvs-1-2-supply = <&src_pp1800_s4a>;
+
+		src_pp1125_s2a: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		src_pp1350_s3a: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		src_pp2040_s5a: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		src_pp1025_s7a: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		src_pp875_l1a: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		src_pp1200_l2a: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+			/* TODO: why??? */
+			regulator-always-on;
+		};
+
+		pp1000_l3a_sdr845: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		src_pp800_l5a: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		src_pp1800_l6a: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_l7a_wcn3990: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1200_l8a: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_dx_pen:
+		src_pp1800_l9a: ldo9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1800_l10a: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1000_l11a_sdr845: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		src_pp1800_l12a: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		src_pp2950_l13a: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1800_l14a: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1800_l15a: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2700_l16a: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1300_l17a: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2700_l18a: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * NOTE: this rail should have been called
+		 * src_pp3300_l19a in the schematic
+		 */
+		src_pp3000_l19a: ldo19 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp2950_l20a: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp2950_l21a: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_hub:
+		src_pp3300_l22a: ldo22 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/*
+			 * HACK: Should add a usb hub node and driver
+			 * to turn this on and off at suspend/resume time
+			 */
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		pp3300_l23a_ch1_wcn3990: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		src_pp3075_l24a: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l25a_ch0_wcn3990: ldo25 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1200_hub:
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		src_pp1200_l26a: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_dx_pen:
+		src_pp3300_l28a: ldo28 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1800_lvs1: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		src_pp1800_lvs2: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&src_vph_pwr>;
+		vdd-s2-supply = <&src_vph_pwr>;
+		vdd-s3-supply = <&src_vph_pwr>;
+		vdd-s4-supply = <&src_vph_pwr>;
+
+		src_pp600_s3c: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+edp_brij_i2c: &i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sn65dsi86_bridge: bridge@2d {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_brij_en &edp_brij_irq>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+		vpll-supply = <&src_pp1800_s4a>;
+		vccio-supply = <&src_pp1800_s4a>;
+		vcca-supply = <&src_pp1200_l2a>;
+		vcc-supply = <&src_pp1200_l2a>;
+
+		clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+		clock-names = "refclk";
+
+		no-hpd;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+	};
+};
+
+ap_pen_1v8: &i2c11 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	digitizer@9 {
+		compatible = "wacom,w9013", "hid-over-i2c";
+		reg = <0x9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
+
+		vdd-supply = <&pp3300_dx_pen>;
+		vddl-supply = <&pp1800_dx_pen>;
+		post-power-on-delay-ms = <100>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x1>;
+	};
+};
+
+amp_i2c: &i2c12 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+ap_ts_i2c: &i2c14 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l &ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&src_pp3300_l28a>;
+
+		reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "modem";
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+/*
+ * Cheza fw does not properly program the GPU aperture to allow the
+ * GPU to update the SMMU pagetables for context switches.  Work
+ * around this by dropping the "qcom,adreno-smmu" compat string.
+ */
+&adreno_smmu {
+	compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
+};
+
+&mss_pil {
+	status = "okay";
+
+	iommus = <&apps_smmu 0x781 0x0>,
+		 <&apps_smmu 0x724 0x3>;
+};
+
+&pm8998_pwrkey {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+	iommus = <&apps_smmu 0x0 0x3>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+	iommus = <&apps_smmu 0x6c0 0x3>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>;
+
+	vmmc-supply = <&src_pp2950_l21a>;
+	vqmmc-supply = <&vddpx_2>;
+
+	cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+
+	tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <129 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&spi10 {
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <122 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3990-bt";
+		vddio-supply = <&src_pp1800_s4a>;
+		vddxo-supply = <&pp1800_l7a_wcn3990>;
+		vddrf-supply = <&src_pp1300_l17a>;
+		vddch0-supply = <&pp3300_l25a_ch0_wcn3990>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&src_pp2950_l20a>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+
+	/* We'll use this as USB 2.0 only */
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+	/*
+	 * The hardware design intends this port to be hooked up in peripheral
+	 * mode, so we'll hardcode it here.  Some details:
+	 * - SDM845 expects only a single Type C connector so it has only one
+	 *   native Type C port but cheza has two Type C connectors.
+	 * - The only source of DP is the single native Type C port.
+	 * - On cheza we want to be able to hook DP up to _either_ of the
+	 *   two Type C connectors and want to be able to achieve 4 lanes of DP.
+	 * - When you configure a Type C port for 4 lanes of DP you lose USB3.
+	 * - In order to make everything work, the native Type C port is always
+	 *   configured as 4-lanes DP so it's always available.
+	 * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then
+	 *   sent to the two Type C connectors.
+	 * - The extra USB2 lines from the native Type C port are always
+	 *   setup as "peripheral" so that we can mux them over to one connector
+	 *   or the other if someone needs the connector configured as a gadget
+	 *   (but they only get USB2 speeds).
+	 *
+	 * All the hardware muxes would allow us to hook things up in different
+	 * ways to some potential benefit for static configurations (you could
+	 * achieve extra USB2 bandwidth by using two different ports for the
+	 * two connectors or possibly even get USB3 peripheral mode), but in
+	 * each case you end up forcing to disconnect/reconnect an in-use
+	 * USB session in some cases depending on what you hotplug into the
+	 * other connector.  Thus hardcoding this as peripheral makes sense.
+	 */
+	dr_mode = "peripheral";
+
+	/*
+	 * We always need the high speed pins as 4-lanes DP in case someone
+	 * hotplugs a DP peripheral.  Thus limit this port to a max of high
+	 * speed.
+	 */
+	maximum-speed = "high-speed";
+
+	/*
+	 * We don't need the usb3-phy since we run in highspeed mode always, so
+	 * re-define these properties removing the superspeed USB PHY reference.
+	 */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	/* We have this hooked up to a hub and we always use in host mode */
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&src_pp800_l5a >;
+	vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>;
+	vdd-1.3-rfa-supply = <&src_pp1300_l17a>;
+	vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qspi_cs0 {
+	bias-disable;		/* External pullup */
+};
+
+&qspi_clk {
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data0 {
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data1 {
+	bias-pull-down;
+};
+
+&qup_i2c3_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c12_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c14_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_spi0_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi5_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* PINCTRL - board-specific pinctrl */
+&pm8005_gpios {
+	gpio-line-names = "",
+			  "",
+			  "SLB",
+			  "";
+};
+
+&pm8998_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "sdm_temp";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		label = "quiet_temp";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "lte_temp_1";
+	};
+
+	channel@50 {
+		reg = <ADC5_AMUX_THM4_100K_PU>;
+		label = "lte_temp_2";
+	};
+
+	channel@51 {
+		reg = <ADC5_AMUX_THM5_100K_PU>;
+		label = "charger_temp";
+	};
+};
+
+&pm8998_gpios {
+	gpio-line-names = "",
+			  "",
+			  "SW_CTRL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CFG_OPT1",
+			  "WCSS_PWR_REQ",
+			  "",
+			  "CFG_OPT2",
+			  "SLB";
+};
+
+&tlmm {
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&bios_flash_wp_r_l>,
+		    <&ap_suspend_l_deassert>;
+
+	pinctrl-1 = <&bios_flash_wp_r_l>,
+		    <&ap_suspend_l_assert>;
+
+	/*
+	 * Hogs prevent usermode from changing the value. A GPIO can be both
+	 * here and in the pinctrl section.
+	 */
+	ap-suspend-l-hog {
+		gpio-hog;
+		gpios = <126 GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+
+	ap_edp_bklten: ap-edp-bklten-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	bios_flash_wp_r_l: bios-flash-wp-r-l-state {
+		pins = "gpio128";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ec_ap_int_l: ec-ap-int-l-state {
+	       pins = "gpio122";
+	       function = "gpio";
+	       bias-pull-up;
+	};
+
+	edp_brij_en: edp-brij-en-state {
+		pins = "gpio102";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_brij_irq: edp-brij-irq-state {
+		pins = "gpio10";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
+		pins = "gpio43";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	h1_ap_int_odl: h1-ap-int-odl-state {
+		pins = "gpio129";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	pen_eject_odl: pen-eject-odl-state {
+		pins = "gpio119";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	pen_irq_l: pen-irq-l-state {
+		pins = "gpio24";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	pen_pdct_l: pen-pdct-l-state {
+		pins = "gpio63";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	pen_rst_l: pen-rst-l-state {
+		pins = "gpio23";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+
+		/*
+		 * The pen driver doesn't currently support
+		 * driving this reset line.  By specifying
+		 * output-high here we're relying on the fact
+		 * that this pin has a default pulldown at boot
+		 * (which makes sure the pen was in reset if it
+		 * was powered) and then we set it high here to
+		 * take it out of reset.  Better would be if the
+		 * pen driver could control this and we could
+		 * remove "output-high" here.
+		 */
+		output-high;
+	};
+
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio90", "gpio91", "gpio92", "gpio95";
+
+		/*
+		 * When we're not actively transferring we want pins as GPIOs
+		 * with output disabled so that the quad SPI IP block stops
+		 * driving them. We rely on the normal pulls configured in
+		 * the active state and don't redefine them here. Also note
+		 * that we don't need the reverse (output-enable) in the
+		 * normal mode since the "output-enable" only matters for
+		 * GPIO function.
+		 */
+		function = "gpio";
+		output-disable;
+	};
+
+	sdc2_clk: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_cd_odl: sd-cd-odl-state {
+		pins = "gpio44";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_int_l: ts-int-l-state {
+		pins = "gpio125";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_reset_l: ts-reset-l-state {
+		pins = "gpio118";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ap_suspend_l_assert: ap-suspend-l-assert-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	ap_suspend_l_deassert: ap-suspend-l-deassert-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-high;
+	};
+};
+
+&venus {
+	status = "okay";
+
+	video-firmware {
+		iommus = <&apps_smmu 0x10b2 0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
new file mode 100644
index 0000000000..a21caa6f3f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "sdm845-db845c.dts"
+
+&camss {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			csiphy0_ep: endpoint {
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&ov8856_ep>;
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c0 {
+	camera@10 {
+		compatible = "ovti,ov8856";
+		reg = <0x10>;
+
+		/* CAM0_RST_N */
+		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_default>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+		clock-names = "xvclk";
+		clock-frequency = <19200000>;
+
+		/*
+		 * The &vreg_s4a_1p8 trace is powered on as a,
+		 * so it is represented by a fixed regulator.
+		 *
+		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators
+		 * both have to be enabled through the power management
+		 * gpios.
+		 */
+		dovdd-supply = <&vreg_lvs1a_1p8>;
+		avdd-supply = <&cam0_avdd_2v8>;
+		dvdd-supply = <&cam0_dvdd_1v2>;
+
+		port {
+			ov8856_ep: endpoint {
+				link-frequencies = /bits/ 64
+					<360000000 180000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};
+
+&cci_i2c1 {
+	camera@60 {
+		compatible = "ovti,ov7251";
+
+		/* I2C address as per ov7251.txt linux documentation */
+		reg = <0x60>;
+
+		/* CAM3_RST_N */
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam3_default>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+
+		/*
+		 * The &vreg_s4a_1p8 trace always powered on.
+		 *
+		 * The 2.8V vdda-supply regulator is enabled when the
+		 * vreg_s4a_1p8 trace is pulled high.
+		 * It too is represented by a fixed regulator.
+		 *
+		 * No 1.2V vddd-supply regulator is used.
+		 */
+		vdddo-supply = <&vreg_lvs1a_1p8>;
+		vdda-supply = <&cam3_avdd_2v8>;
+
+		status = "disabled";
+
+		port {
+			ov7251_ep: endpoint {
+				data-lanes = <0 1>;
+/*				remote-endpoint = <&csiphy3_ep>; */
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
new file mode 100644
index 0000000000..7e7bf3fb3b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -0,0 +1,1190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "Thundercomm Dragonboard 845c";
+	compatible = "thundercomm,db845c", "qcom,sdm845";
+	qcom,msm-id = <341 0x20001>;
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Fixed crystal oscillator dedicated to MCP2517FD */
+	clk40M: can-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	dc12v: dc12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "green:user4";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-1 {
+			label = "yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	reserved-memory {
+		/* Cont splash region set up by the bootloader */
+		cont_splash_mem: framebuffer@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+	};
+
+	lt9611_1v8: lt9611-vdd18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V8";
+
+		vin-supply = <&vdc_5v>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lt9611_3v3: lt9611-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+
+		vin-supply = <&vdc_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+	};
+
+	pcie0_1p05v: pcie-0-1p05v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE0_1.05V";
+
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+	};
+
+	cam0_dvdd_1v2: cam0-dvdd-1v2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM0_DVDD_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		enable-active-high;
+		gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
+		vin-supply = <&vbat>;
+	};
+
+	cam0_avdd_2v8: cam0-avdd-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM0_AVDD_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_avdd_2v8_en_default>;
+		vin-supply = <&vbat>;
+	};
+
+	/* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
+	cam3_avdd_2v8: cam3-avdd-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM3_AVDD_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vbat>;
+	};
+
+	pcie0_3p3v_dual: vldo-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VLDO_3V3";
+
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie0_pwren_state>;
+	};
+
+	v5p0_hdmiout: v5p0-hdmiout-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "V5P0_HDMIOUT";
+
+		vin-supply = <&vdc_5v>;
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <500000>;
+
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+	};
+
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vbat_som: vbat-som-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vdc_3v3: vdc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdc_5v: vdc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <500000>;
+		regulator-always-on;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+
+		vin-supply = <&vbat_som>;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+
+	firmware-name = "qcom/sdm845/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&camss {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/cdsp.mbn";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v8>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>, <&dsi_sw_sel>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&i2c11 {
+	/* On Low speed expansion */
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c14 {
+	/* On Low speed expansion */
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&mdss {
+	memory-region = <&cont_splash_mem>;
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l1a_0p875>;
+	status = "okay";
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+
+	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+};
+
+&pcie0_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+};
+
+&pcie1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&pm8998_gpios {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"WLAN_SW_CTRL",
+		"NC",
+		"PM_GPIO5_BLUE_BT_LED",
+		"VOL_UP_N",
+		"NC",
+		"ADC_IN1",
+		"PM_GPIO9_YEL_WIFI_LED",
+		"CAM0_AVDD_EN",
+		"NC",
+		"CAM0_DVDD_EN",
+		"PM_GPIO13_GREEN_U4_LED",
+		"DIV_CLK2",
+		"NC",
+		"NC",
+		"NC",
+		"SMB_STAT",
+		"NC",
+		"NC",
+		"ADC_IN2",
+		"OPTION1",
+		"WCSS_PWR_REQ",
+		"PM845_GPIO24",
+		"OPTION2",
+		"PM845_SLB";
+
+	cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
+		pins = "gpio12";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
+		pins = "gpio10";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8998_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <3>;
+
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+
+	led@4 {
+		reg = <4>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <2>;
+	};
+
+	led@5 {
+		reg = <5>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <1>;
+	};
+};
+
+/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0 1 2 3>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+		direction = <2>;
+		is-compress-dai;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
+	pinctrl-0 = <&quat_mi2s_active
+			 &quat_mi2s_sd0_active
+			 &quat_mi2s_sd1_active
+			 &quat_mi2s_sd2_active
+			 &quat_mi2s_sd3_active>;
+	pinctrl-names = "default";
+	model = "DB845c";
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"DMIC0", "MIC BIAS1",
+		"DMIC1", "MIC BIAS1",
+		"DMIC2", "MIC BIAS3",
+		"DMIC3", "MIC BIAS3",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MM_DL4",  "MultiMedia4 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&lt9611_codec 0>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup_spi0_default>;
+	cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+
+	can@0 {
+		compatible = "microchip,mcp2517fd";
+		reg = <0>;
+		clocks = <&clk40M>;
+		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
+&spi2 {
+	/* On Low speed expansion */
+	status = "okay";
+};
+
+&tlmm {
+	cam0_default: cam0-default-state {
+		rst-pins {
+			pins = "gpio9";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		mclk0-pins {
+			pins = "gpio13";
+			function = "cam_mclk";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	cam3_default: cam3-default-state {
+		rst-pins {
+			function = "gpio";
+			pins = "gpio21";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		mclk3-pins {
+			function = "cam_mclk";
+			pins = "gpio16";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	dsi_sw_sel: dsi-sw-sel-state {
+		pins = "gpio120";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio84";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		clkreq-pins {
+			pins = "gpio36";
+			function = "pci_e0";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio35";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio37";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_pwren_state: pcie0-pwren-state {
+		pins = "gpio90";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-n-pins {
+			pins = "gpio102";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		clkreq-pins {
+			pins = "gpio103";
+			function = "pci_e1";
+			bias-pull-up;
+		};
+
+		wake-n-pins {
+			pins = "gpio11";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio75";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+
+			/*
+			 * It seems that mmc_test reports errors if drive
+			 * strength is not 16 on clk, cmd, and data pins.
+			 */
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart3 {
+	label = "LS-UART0";
+	pinctrl-0 = <&qup_uart3_4pin>;
+
+	status = "disabled";
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+
+	swm: swm@c85 {
+		left_spkr: speaker@0,1 {
+			compatible = "sdw10217201000";
+			reg = <0 1>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: speaker@0,2 {
+			compatible = "sdw10217201000";
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			reg = <0 2>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+	qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi2_default {
+	drive-strength = <16>;
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi0_default {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
new file mode 100644
index 0000000000..f942c5afea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG G7 / V35 (judyln / judyp) common device tree
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
+/delete-node/ &qseecom_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		qseecom_mem: memory@b2000000 {
+			reg = <0 0xb2000000 0 0x1800000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8c415000 {
+			reg = <0 0x8c415000 0 0x2000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8c400000 {
+			reg = <0 0x8c400000 0 0x10000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1e00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8e300000 {
+			reg = <0 0x8e300000 0 0x100000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e400000 {
+			reg = <0 0x8e400000 0 0x8900000>;
+			no-map;
+		};
+
+		venus_mem: memory@96d00000 {
+			reg = <0 0x96d00000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@97200000 {
+			reg = <0 0x97200000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: memory@97a00000 {
+			reg = <0 0x97a00000 0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@97c00000 {
+			reg = <0 0x97c00000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: memory@99000000 {
+			reg = <0 0x99000000 0 0x100000>;
+			no-map;
+		};
+
+		/* Framebuffer region */
+		memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		/* rmtfs lower guard */
+		memory@f0800000 {
+			reg = <0 0xf0800000 0 0x1000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f0801000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf0801000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		/* rmtfs upper guard */
+		memory@f0a01000 {
+			reg = <0 0xf0a01000 0 0x1000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>;
+
+		label = "GPIO Buttons";
+
+		key-vol-up {
+			label = "Volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+};
+
+&dispcc {
+	status = "disabled";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "modem";
+	status = "okay";
+};
+
+&mss_pil {
+	status = "okay";
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+};
+
+/*
+ * UFS works partially and only with clk_ignore_unused.
+ * Sometimes it crashes with I/O errors.
+ */
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* TODO: these devices have usb id pin */
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <81 4>;
+
+	sdc2_clk: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16 on clk, cmd, and data pins.
+		 *
+		 * TODO: copy-pasted from mtp, try other values
+		 * on these devices.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&pm8998_gpios {
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
new file mode 100644
index 0000000000..a12723310c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG G7 (judyln) device tree.
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845-lg-common.dtsi"
+
+/ {
+	model = "LG G7 ThinQ";
+	compatible = "lg,judyln", "qcom,sdm845";
+
+	chosen {
+		framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>;
+			width = <1440>;
+			height = <3120>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+			lab-supply = <&lab>;
+			ibb-supply = <&ibb>;
+		};
+	};
+
+	/* Additional ThinQ key */
+	gpio-keys {
+		pinctrl-0 = <&vol_up_pin_a &thinq_key_default>;
+
+		key-thinq {
+			label = "ThinQ";
+			linux,code = <KEY_ASSISTANT>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <89 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm845/judyln/adsp.mbn";
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm845/judyln/cdsp.mbn";
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/sdm845/judyln/a630_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn";
+};
+
+&tlmm {
+	thinq_key_default: thinq-key-default-state {
+		pins = "gpio89";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
new file mode 100644
index 0000000000..d17d4d4d56
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG V35 (judyp) device tree.
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845-lg-common.dtsi"
+
+/ {
+	model = "LG V35 ThinQ";
+	compatible = "lg,judyp", "qcom,sdm845";
+
+	chosen {
+		framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>;
+			width = <1440>;
+			height = <2880>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm845/judyp/adsp.mbn";
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm845/judyp/cdsp.mbn";
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/sdm845/judyp/a630_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
new file mode 100644
index 0000000000..1516113391
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -0,0 +1,771 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 MTP board device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDM845 MTP";
+	compatible = "qcom,sdm845-mtp", "qcom,sdm845";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	thermal-zones {
+		xo_thermal: xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 1>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		msm_thermal: msm-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 2>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pa_thermal: pa-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 3>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet_thermal: quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 4>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/adsp.mdt";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/cdsp.mdt";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&truly_in_0>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "truly,nt35597-2K-display";
+		reg = <0>;
+		vdda-supply = <&vreg_l14a_1p88>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+		mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				truly_in_0: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				truly_in_1: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&mdss_dsi1 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi1_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&truly_in_1>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi1_pll>;
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
+&pm8998_adc {
+	channel@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		label = "xo_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "msm_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "pa_therm1";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@51 {
+		reg = <ADC5_AMUX_THM5_100K_PU>;
+		label = "quiet_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@83 {
+		reg = <ADC5_VPH_PWR>;
+		label = "vph_pwr";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@85 {
+		reg = <ADC5_VCOIN>;
+		label = "vcoin";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&pm8998_adc_tm {
+	status = "okay";
+
+	xo-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	msm-thermistor@2 {
+		reg = <2>;
+		io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pa-thermistor@3 {
+		reg = <3>;
+		io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-thermistor@4 {
+		reg = <4>;
+		io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Until we have Type C hooked up we'll force this as peripheral. */
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	/*
+	 * Though the USB block on SDM845 can support host, there's no vbus
+	 * signal for this port on MTP.  Thus (unless you have a non-compliant
+	 * hub that works without vbus) the only sensible thing is to force
+	 * peripheral mode.
+	 */
+	dr_mode = "peripheral";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_clk: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16 on clk, cmd, and data pins.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
new file mode 100644
index 0000000000..122c7128de
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/delete-node/ &rmtfs_mem;
+
+/ {
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall effect sensor";
+
+		pinctrl-0 = <&hall_sensor_default>;
+		pinctrl-names = "default";
+
+		event-hall-sensor {
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			label = "Hall Effect Sensor";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Volume keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
+
+		key-vol-down {
+			label = "Volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+
+		key-vol-up {
+			label = "Volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		/*
+		 * The rmtfs_mem needs to be guarded due to "XPU limitations"
+		 * it is otherwise possible for an allocation adjacent to the
+		 * rmtfs_mem region to trigger an XPU violation, causing a crash.
+		 */
+		rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 {
+			no-map;
+			reg = <0 0xf5b00000 0 0x1000>;
+		};
+		/*
+		 * The rmtfs memory region in downstream is 'dynamically allocated'
+		 * but given the same address every time. Hard code it as this address is
+		 * where the modem firmware expects it to be.
+		 */
+		rmtfs_mem: rmtfs-mem@f5b01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf5b01000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+		rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
+			no-map;
+			reg = <0 0xf5d01000 0 0x1000>;
+		};
+
+		/*
+		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
+		 * random crashes which are most likely modem related, more testing needed.
+		 */
+		removed_region: removed-region@88f00000 {
+			no-map;
+			reg = <0 0x88f00000 0 0x1c00000>;
+		};
+
+		ramoops: ramoops@ac300000 {
+			compatible = "ramoops";
+			reg = <0 0xac300000 0 0x400000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x200000>;
+			ecc-size = <16>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	/*
+	 * The touchscreen regulator seems to be controlled somehow by a gpio.
+	 * Model it as a fixed regulator and keep it on. Without schematics we
+	 * don't know how this is actually wired up...
+	 */
+	ts_1p8_supply: ts-1p8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_1p8_supply";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 88 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdda_mipi_dsi0_pll:
+		vdda_qlink_lv:
+		vdda_ufs1_core:
+		vdda_usb1_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_1p8:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_mipi_dsi0_1p2:
+		vdda_ufs1_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+				<GCC_QSPI_CORE_CLK_SRC>,
+				<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				<GCC_LPASS_Q6_AXI_CLK>,
+				<GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	bq27441_fg: bq27441-battery@55 {
+		compatible = "ti,bq27411";
+		status = "okay";
+		reg = <0x55>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	synaptics-rmi4-i2c@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_default_pins>;
+
+		vdd-supply = <&vreg_l28a_3p0>;
+		vio-supply = <&ts_1p8_supply>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4_f12: rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <144>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+		};
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	/*
+	 * Both devices use different panels but all other properties
+	 * are common. Compatible line is declared in device dts.
+	 */
+	display_panel: panel@0 {
+		status = "disabled";
+
+		reg = <0>;
+
+		vddio-supply = <&vreg_l14a_1p88>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+/* Modem/wifi */
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
+};
+
+&pm8998_gpios {
+	volume_down_gpio: pm8998-gpio5-state {
+		pinconf {
+			pins = "gpio5";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <0>;
+		};
+	};
+
+	volume_up_gpio: pm8998-gpio6-state {
+		pinconf {
+			pins = "gpio6";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <0>;
+		};
+	};
+};
+
+&pmi8998_charger {
+	status = "okay";
+};
+
+&q6afedai {
+	qi2s@22 {
+		reg = <22>;
+		qcom,sd-lines = <1>;
+	};
+
+	qi2s@23 {
+		reg = <23>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+
+	dai@4 {
+		reg = <4>;
+	};
+
+	dai@5 {
+		reg = <5>;
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_i2c12_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&slpi_pas {
+	firmware-name = "qcom/sdm845/oneplus6/slpi.mbn";
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	speaker_playback_dai: speaker-dai-link {
+		link-name = "Speaker Playback";
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback 1";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture 1";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+
+	slim2-dai-link {
+		link-name = "SLIM Playback 2";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 2>; /* AIF2_PB */
+		};
+	};
+
+	slimcap2-dai-link {
+		link-name = "SLIM Capture 2";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 3>; /* AIF2_CAP */
+		};
+	};
+
+	slimcap3-dai-link {
+		link-name = "SLIM Capture 3";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_2_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 5>; /* AIF3_CAP */
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		/*
+		 * This path is relative to the qca/
+		 * subdir under lib/firmware.
+		 */
+		firmware-name = "oneplus6/crnv21.bin";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+
+	/*
+	 * disable USB3 clock requirement as the device only supports
+	 * USB2.
+	 */
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+	/*
+	 * We don't have the capability to switch modes yet.
+	 */
+	dr_mode = "peripheral";
+
+	/* fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Remove USB3 phy as it's unused on this device. */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	hall_sensor_default: hall-sensor-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tri_state_key_default: tri-state-key-default-state {
+		pins = "gpio40", "gpio42", "gpio26";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_default_pins: ts-int-state {
+		pins = "gpio99", "gpio125";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	panel_reset_pins: panel-reset-state {
+		pins = "gpio6", "gpio25", "gpio26";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	panel_te_pin: panel-te-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	panel_esd_pin: panel-esd-state {
+		pins = "gpio30";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	speaker_default: speaker-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+		output-high;
+	};
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
+};
+
+&wcd9340 {
+	pinctrl-0 = <&wcd_intr_default>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
new file mode 100644
index 0000000000..4005e04d99
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6 (enchilada) device tree.
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 6";
+	compatible = "oneplus,enchilada", "qcom,sdm845";
+	chassis-type = "handset";
+	qcom,msm-id = <0x141 0x20001>;
+	qcom,board-id = <8 0 17819 22>;
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3300000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+};
+
+&display_panel {
+	status = "okay";
+
+	compatible = "samsung,sofef00";
+};
+
+&bq27441_fg {
+	monitored-battery = <&battery>;
+};
+
+&i2c4 {
+	status = "okay";
+
+	max98927_codec: max98927@3a {
+		compatible = "maxim,max98927";
+		reg = <0x3a>;
+		#sound-dai-cells = <0>;
+
+		pinctrl-0 = <&speaker_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+
+		vmon-slot-no = <1>;
+		imon-slot-no = <0>;
+	};
+};
+
+&pmi8998_charger {
+	monitored-battery = <&battery>;
+};
+
+&sound {
+	model = "OnePlus 6";
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",
+			"AMIC3", "MIC BIAS4",
+			"AMIC4", "MIC BIAS1",
+			"AMIC5", "MIC BIAS4";
+};
+
+&speaker_playback_dai {
+	codec {
+		sound-dai = <&max98927_codec>;
+	};
+};
+
+&wcd9340 {
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+	qcom,micbias4-microvolt = <1800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
new file mode 100644
index 0000000000..9471ada0d6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6T (fajita) device tree.
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 6T";
+	compatible = "oneplus,fajita", "qcom,sdm845";
+	chassis-type = "handset";
+	qcom,msm-id = <0x141 0x20001>;
+	qcom,board-id = <8 0 18801 41>;
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3700000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+};
+
+&display_panel {
+	status = "okay";
+
+	compatible = "samsung,s6e3fc2x01";
+};
+
+&i2c4 {
+	/* nxp,tfa9894 @ 0x34 */
+};
+
+&bq27441_fg {
+	monitored-battery = <&battery>;
+};
+
+&sound {
+	model = "OnePlus 6T";
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC1", "MIC BIAS3",
+			"AMIC2", "MIC BIAS2",
+			"AMIC3", "MIC BIAS4",
+			"AMIC4", "MIC BIAS1",
+			"AMIC5", "MIC BIAS3";
+};
+
+&pmi8998_charger {
+	monitored-battery = <&battery>;
+};
+
+/*
+ * The TFA9894 codec is currently unsupported.
+ * We need to delete the node to allow the soundcard
+ * to probe for headphones/earpiece.
+ */
+/delete-node/ &speaker_playback_dai;
+
+&rmi4_f12 {
+	touchscreen-y-mm = <148>;
+};
+
+&wcd9340 {
+	qcom,micbias1-microvolt = <2700000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <2700000>;
+	qcom,micbias4-microvolt = <2700000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
new file mode 100644
index 0000000000..d37a433130
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+
+/ {
+	chassis-type = "handset";
+	model = "Samsung Galaxy S9 SM-G9600";
+	compatible = "samsung,starqltechn", "qcom,sdm845";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		framebuffer: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x02400000>;
+			no-map;
+		};
+
+		memory@a1300000 {
+			compatible = "ramoops";
+			reg = <0x0 0xa1300000 0x0 0x100000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x40000>;
+		};
+	};
+};
+
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+				<GCC_QSPI_CORE_CLK_SRC>,
+				<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				<GCC_LPASS_Q6_AXI_CLK>,
+				<GCC_LPASS_SWAY_CLK>;
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Until we have Type C hooked up we'll force this as peripheral. */
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+
+	sdc2_clk_state: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16 on clk, cmd, and data pins.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd_state: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data_state: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_card_det_n_state: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
new file mode 100644
index 0000000000..fbb8655653
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
+ * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
+ * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "SHIFT SHIFT6mq";
+	compatible = "shift,axolotl", "qcom,sdm845";
+	qcom,msm-id = <321 0x20001>;
+	qcom,board-id = <11 0>;
+
+	aliases {
+		display0 = &framebuffer0;
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		/* Use framebuffer setup by the bootloader. */
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
+			width = <1080>;
+			height = <2160>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		key-vol-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		framebuffer_region@9d400000 {
+			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
+			no-map;
+		};
+
+		ramoops: ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0 0xb0000000 0 0x00400000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x200000>;
+			ecc-size = <0x0>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3850000>;
+		voltage-min-design-microvolt = <3600000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/cdsp.mbn";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn";
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "focaltech,fts8719";
+		reg = <0x38>;
+		wakeup-source;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&vreg_l28a_3p0>;
+		vcc-i2c-supply = <&vreg_l14a_1p88>;
+
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
+
+		reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+		irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+		focaltech,max-touch-number = <5>;
+	};
+};
+
+&i2c10 {
+	/* SMB1355@0x0C */
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	panel@0 {
+		compatible = "visionox,rm69299-shift";
+		status = "okay";
+		reg = <0>;
+		vdda-supply = <&vreg_l14a_1p88>;
+		vdd3p3-supply = <&vreg_l28a_3p0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&sde_dsi_active &sde_te_active>;
+		pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
+
+		port {
+			panel_in_0: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
+};
+
+&pm8998_gpios {
+	volume_up_gpio: pm8998-gpio6-state {
+		pinconf {
+			pins = "gpio6";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <0>;
+		};
+	};
+};
+
+&pmi8998_charger {
+	monitored-battery = <&battery>;
+
+	status = "okay";
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8998_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <100000>;
+		flash-max-microamp = <1100000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <100000>;
+		flash-max-microamp = <1100000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&slpi_pas {
+	firmware-name = "qcom/sdm845/axolotl/slpi.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio6", "gpio11";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio6", "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active: sde-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_suspend: sde-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_int_suspend: ts-int-suspend-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio99";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_suspend: ts-reset-suspend-state {
+		pins = "gpio99";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		/*
+		 * This path is relative to the qca/
+		 * subdir under lib/firmware.
+		 */
+		firmware-name = "axolotl/crnv21.bin";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/venus.mbn";
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
new file mode 100644
index 0000000000..d97b7f1e71
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/ {
+	model = "Sony Xperia XZ2";
+	compatible = "sony,akari-row", "qcom,sdm845";
+};
+
+&panel {
+	compatible = "sony,td4353-jdi-tama";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
new file mode 100644
index 0000000000..5d2052a0ff
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/* XZ3 uses an Atmel touchscreen instead. */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Sony Xperia XZ3";
+	compatible = "sony,akatsuki-row", "qcom,sdm845";
+
+	/* Fixed DCDC for the OLED panel */
+	ts_vddio_supply: ts-vddio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_vddio";
+
+		regulator-min-microvolt = <1840000>;
+		regulator-max-microvolt = <1840000>;
+
+		gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ibb {
+	status = "disabled";
+};
+
+&lab {
+	status = "disabled";
+};
+
+&panel {
+	/* Akatsuki uses an OLED panel. */
+	/delete-property/ backlight;
+	/delete-property/ vsp-supply;
+	/delete-property/ vsn-supply;
+	/delete-property/ touch-reset-gpios;
+};
+
+&pmi8998_wled {
+	status = "disabled";
+};
+
+&tlmm {
+	ts_vddio_en: ts-vddio-en-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+};
+
+&vreg_l14a_1p8 {
+	regulator-min-microvolt = <1840000>;
+	regulator-max-microvolt = <1840000>;
+};
+
+&vreg_l22a_2p8 {
+	/* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */
+	regulator-min-microvolt = <2696000>;
+	regulator-max-microvolt = <2696000>;
+};
+
+&vreg_l28a_2p8 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
new file mode 100644
index 0000000000..cd056f7807
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/ {
+	model = "Sony Xperia XZ2 Compact";
+	compatible = "sony,apollo-row", "qcom,sdm845";
+};
+
+&panel {
+	compatible = "sony,td4353-jdi-tama";
+	height-mm = <112>;
+	width-mm = <56>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
new file mode 100644
index 0000000000..7ee61b2045
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &uart6;
+		serial1 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
+		pinctrl-names = "default";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			gpios = <&pm8998_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		/* SONY was cool and didn't diverge from MTP this time, yay! */
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_0p9>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>;
+		vdd-l3-l11-supply = <&vreg_s7a_0p9>;
+		vdd-l4-l5-supply = <&vreg_s7a_0p9>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l9-supply = <&vreg_s5a_1p9>;
+		vdd-l10-l23-l25-supply = <&src_vreg_bob>;
+		vdd-l13-l19-l21-supply = <&src_vreg_bob>;
+		vdd-l16-l28-supply = <&src_vreg_bob>;
+		vdd-l18-l22-supply = <&src_vreg_bob>;
+		vdd-l20-l24-supply = <&src_vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p3>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p1: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p3: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_0p9: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p9: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p7: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p7: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-system-load = <62000>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_2p7: ldo19 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+			/*
+			 * The driver *really* doesn't want this regualtor to exist,
+			 * saying that it could not get the current voltage (-ENOTRECOVERABLE)
+			 * even though it surely is used on these devices (as a voltage
+			 * source for camera autofocus)
+			 */
+			status = "disabled";
+		};
+
+		vreg_l20a_2p7: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p7: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p8: ldo22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p0: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p1: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p0: ldo25 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_2p8: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-system-load = <100000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		src_vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn";
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			<GCC_QSPI_CORE_CLK_SRC>,
+			<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			<GCC_LPASS_Q6_AXI_CLK>,
+			<GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn";
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen: touchscreen@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&vreg_l14a_1p8>;
+		/*
+		 * This is a blatant abuse of OF, but the panel driver *needs*
+		 * to probe first, as the power/gpio switching needs to be precisely
+		 * timed in order for both the display and touch panel to function properly.
+		 */
+		incell-supply = <&panel>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <1000>;
+
+		pinctrl-0 = <&ts_default>;
+		pinctrl-1 = <&ts_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Qcom SMB1355 @ 8, c */
+	/* NXP PN547 NFC @ 28 */
+	/* Renesas IDTP9221 Qi charger @ 61 */
+};
+
+&i2c14 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* SONY ToF sensor @ 52 */
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&ibb {
+	qcom,discharge-resistor-kohms = <300>;
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5700000>;
+	regulator-min-microamp = <0>;
+	regulator-max-microamp = <800000>;
+	regulator-over-current-protection;
+	regulator-soft-start;
+	regulator-pull-down;
+};
+
+&lab {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5700000>;
+	regulator-min-microamp = <200000>;
+	regulator-max-microamp = <200000>;
+	regulator-over-current-protection;
+	regulator-soft-start;
+	regulator-pull-down;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* The compatible is assigned in device DTs. */
+		reg = <0>;
+
+		backlight = <&pmi8998_wled>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		vsp-supply = <&lab>;
+		vsn-supply = <&ibb>;
+		panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+		pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1a_0p9>;
+	status = "okay";
+};
+
+&pm8998_gpios {
+	focus_n: focus-n-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	snapshot_n: snapshot-n-state {
+		pins = "gpio7";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmi8998_wled {
+	default-brightness = <800>;
+	qcom,switching-freq = <800>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,current-boost-limit = <970>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,enabled-strings = <0 1 2 3>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l21a_2p7>;
+	vqmmc-supply = <&vreg_l13a_1p8>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sdc2_default_state>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_sleep: sde-dsi-sleep-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active_sleep: sde-te-active-sleep-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_default: ts-default-state {
+		reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		int-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	ts_sleep: ts-sleep-state {
+		reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		int-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+	status = "okay";
+
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+
+	maximum-speed = "high-speed";
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p1>;
+};
+
+&venus {
+	firmware-name = "qcom/sdm845/Sony/tama/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
new file mode 100644
index 0000000000..c15d488606
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+&slim {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		wcd9340_ifd: ifd@0,0 {
+			compatible = "slim217,250";
+			reg = <0 0>;
+		};
+
+		wcd9340: codec@1,0 {
+			compatible = "slim217,250";
+			reg = <1 0>;
+			slim-ifc-dev = <&wcd9340_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clock-names = "extclk";
+			clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "mclk";
+
+			pinctrl-0 = <&wcd_intr_default>;
+			pinctrl-names = "default";
+
+			qcom,micbias1-microvolt = <1800000>;
+			qcom,micbias2-microvolt = <1800000>;
+			qcom,micbias3-microvolt = <1800000>;
+			qcom,micbias4-microvolt = <1800000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			wcdgpio: gpio-controller@42 {
+				compatible = "qcom,wcd9340-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x42 0x2>;
+			};
+
+			swm: swm@c85 {
+				compatible = "qcom,soundwire-v1.3.0";
+				reg = <0xc85 0x40>;
+				interrupts-extended = <&wcd9340 20>;
+
+				qcom,dout-ports = <6>;
+				qcom,din-ports = <2>;
+				qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
+				qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;
+				qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;
+
+				#sound-dai-cells = <1>;
+				clocks = <&wcd9340>;
+				clock-names = "iface";
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	wcd_intr_default: wcd-intr-default-state {
+		pins = "gpio54";
+		function = "gpio";
+
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
new file mode 100644
index 0000000000..9d6faeb656
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/*
+ * Delete following upstream (sdm845.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &tz_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <69 0>;
+	qcom,msm-id = <321 0x20001>;
+
+	aliases {
+		serial1 = &uart6;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* Reserved memory changes from downstream */
+	reserved-memory {
+		tz_mem: memory@86200000 {
+			reg = <0 0x86200000 0 0x4900000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1e00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8e300000 {
+			reg = <0 0x8e300000 0 0x100000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e400000 {
+			reg = <0 0x8e400000 0 0x7800000>;
+			no-map;
+		};
+
+		venus_mem: memory@95c00000 {
+			reg = <0 0x95c00000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@96100000 {
+			reg = <0 0x96100000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: memory@96900000 {
+			reg = <0 0x96900000 0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@96b00000 {
+			reg = <0 0x96b00000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: memory@97f00000 {
+			reg = <0 0x97f00000 0 0x100000>;
+			no-map;
+		};
+
+		/* Cont splash region set up by the bootloader */
+		cont_splash_mem: framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 0x2400000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f6301000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf6301000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <4000000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/beryllium/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/beryllium/cdsp.mbn";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn";
+	};
+};
+
+&ibb {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-soft-start;
+	qcom,discharge-resistor-kohms = <300>;
+};
+
+&lab {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-soft-start;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	display_panel: panel@0 {
+		reg = <0>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		vddpos-supply = <&lab>;
+		vddneg-supply = <&ibb>;
+
+		backlight = <&pmi8998_wled>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		status = "disabled";
+
+		port {
+			panel_in_0: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
+	status = "okay";
+};
+
+&pm8998_gpios {
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pmi8998_lpg {
+	status = "okay";
+
+	led@5 {
+		reg = <5>;
+		color = <LED_COLOR_ID_WHITE>;
+		function = LED_FUNCTION_STATUS;
+	};
+};
+
+&pmi8998_wled {
+	status = "okay";
+	qcom,current-boost-limit = <970>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,num-strings = <2>;
+	qcom,switching-freq = <600>;
+	qcom,external-pfet;
+	qcom,cabc;
+};
+
+&pmi8998_charger {
+	monitored-battery = <&battery>;
+
+	status = "okay";
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+};
+
+&sound {
+	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
+	pinctrl-0 = <&quat_mi2s_active
+			&quat_mi2s_sd0_active>;
+	pinctrl-names = "default";
+	model = "Xiaomi Poco F1";
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"AMIC3", "MIC BIAS3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/sdm845/beryllium/venus.mbn";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <2700000>;
+	qcom,micbias2-microvolt = <1800000>;
+	qcom,micbias3-microvolt = <2700000>;
+	qcom,micbias4-microvolt = <2700000>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
new file mode 100644
index 0000000000..76931ebad0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-xiaomi-beryllium-common.dtsi"
+
+/ {
+	model = "Xiaomi Pocophone F1 (EBBG)";
+	compatible = "xiaomi,beryllium-ebbg", "qcom,sdm845";
+};
+
+&display_panel {
+	compatible = "ebbg,ft8719";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
new file mode 100644
index 0000000000..e9427851eb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-xiaomi-beryllium-common.dtsi"
+
+/ {
+	model = "Xiaomi Pocophone F1 (Tianma)";
+	compatible = "xiaomi,beryllium", "qcom,sdm845";
+};
+
+&display_panel {
+	compatible = "tianma,fhd-video", "novatek,nt36672a";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
new file mode 100644
index 0000000000..6db12abaa8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -0,0 +1,715 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Xilin Wu <strongtz@yeah.net>
+ * Copyright (c) 2022, Molly Sophia <mollysophia379@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include "pm8005.dtsi"
+
+/*
+ * Delete following upstream (sdm845.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+
+/ {
+	model = "Xiaomi Mi MIX 2S";
+	compatible = "xiaomi,polaris", "qcom,sdm845";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x141 0x20001>;
+	qcom,board-id = <0x2a 0x0>;
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		adsp_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1e00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8e300000 {
+			reg = <0 0x8e300000 0 0x100000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e400000 {
+			reg = <0 0x8e400000 0 0x7800000>;
+			no-map;
+		};
+
+		venus_mem: memory@95c00000 {
+			reg = <0 0x95c00000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@96100000 {
+			reg = <0 0x96100000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: memory@96900000 {
+			reg = <0 0x96900000 0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@96b00000 {
+			reg = <0 0x96b00000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: memory@97f00000 {
+			reg = <0 0x97f00000 0 0x100000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f6301000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf6301000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3400000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	vreg_tp_vddio: vreg-tp-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_tp_vddio";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s2a_1p1: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdda_mipi_dsi0_pll:
+		vdda_ufs1_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p05: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l18a_2p9: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p1: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_3p3: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vdda_mipi_dsi0_1p2:
+		vdda_ufs1_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_smp3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm845/polaris/cdsp.mbn";
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+				<GCC_QSPI_CORE_CLK_SRC>,
+				<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				<GCC_LPASS_Q6_AXI_CLK>,
+				<GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/polaris/a630_zap.mbn";
+	};
+};
+
+&ibb {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-soft-start;
+	qcom,discharge-resistor-kohms = <300>;
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn";
+	status = "okay";
+};
+
+&i2c14 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 0x2008>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+
+		vdd-supply = <&vreg_l28a_3p0>;
+		vio-supply = <&vreg_tp_vddio>;
+
+		syna,startup-delay-ms = <0xc8>;
+		syna,reset-delay-ms = <0xc8>;
+
+		rmi4-f01@1 {
+			syna,nosleep-mode = <0x1>;
+			reg = <0x1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,rezero-wait-ms = <0xc8>;
+			syna,clip-x-high = <0x438>;
+			syna,clip-y-high = <0x870>;
+			syna,sensor-type = <0x1>;
+			syna,clip-x-low = <0x0>;
+			syna,clip-y-low = <0x0>;
+		};
+	};
+};
+
+&lab {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	regulator-soft-start;
+	regulator-pull-down;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+	status = "okay";
+
+	display_panel: panel@0 {
+		compatible = "jdi,fhd-nt35596s";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		backlight = <&pmi8998_wled>;
+		vddpos-supply = <&lab>;
+		vddneg-supply = <&ibb>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&sde_dsi_active>;
+		pinctrl-1 = <&sde_dsi_suspend>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+	status = "okay";
+};
+
+&mss_pil {
+	firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn";
+	status = "okay";
+};
+
+&pmi8998_wled {
+	qcom,current-limit-microamp = <20000>;
+	qcom,current-boost-limit = <970>;
+	qcom,ovp-millivolt = <19600>;
+	qcom,switching-freq = <600>;
+	qcom,num-strings = <4>;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&pm8998_gpios {
+	volume_up_gpio: pm8998-gpio6-state {
+		pinconf {
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			function = "normal";
+			pins = "gpio6";
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qup_i2c14_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio99";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio125";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <16>;
+	};
+
+	ts_reset_sleep: ts-reset-sleep-state {
+		pins = "gpio99";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ts_int_sleep: ts-int-sleep-state {
+		pins = "gpio125";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio6", "gpio10";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio6", "gpio10";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		/* This path is relative to the qca/ subdir under lib/firmware. */
+		firmware-name = "polaris/crnv21.bin";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&usb_1 {
+	/* We'll use this as USB 2.0 only */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+
+	/* Fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdd-supply = <&vreg_l1a_0p875>;
+
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,imp-res-offset-value = <8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sdm845/polaris/venus.mbn";
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+
+	qcom,micbias1-microvolt = <2700000>;
+	qcom,micbias2-microvolt = <1800000>;
+	qcom,micbias3-microvolt = <2700000>;
+	qcom,micbias4-microvolt = <2700000>;
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
new file mode 100644
index 0000000000..63f6515692
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -0,0 +1,5782 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+#include <dt-bindings/clock/qcom,lpass-sdm845.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <442>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <442>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <442>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <442>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		cpu_idle_states: idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <350>;
+				exit-latency-us = <461>;
+				min-residency-us = <1890>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <264>;
+				exit-latency-us = <621>;
+				min-residency-us = <952>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdm845", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu0_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu0_opp3: opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <800000 6451200>;
+		};
+
+		cpu0_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <800000 6451200>;
+		};
+
+		cpu0_opp5: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <800000 7680000>;
+		};
+
+		cpu0_opp6: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1804000 9216000>;
+		};
+
+		cpu0_opp7: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <1804000 9216000>;
+		};
+
+		cpu0_opp8: opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <1804000 10444800>;
+		};
+
+		cpu0_opp9: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1804000 11980800>;
+		};
+
+		cpu0_opp10: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <1804000 11980800>;
+		};
+
+		cpu0_opp11: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <2188000 13516800>;
+		};
+
+		cpu0_opp12: opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <2188000 15052800>;
+		};
+
+		cpu0_opp13: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 16588800>;
+		};
+
+		cpu0_opp14: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <3072000 18124800>;
+		};
+
+		cpu0_opp15: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 19353600>;
+		};
+
+		cpu0_opp16: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <4068000 19353600>;
+		};
+
+		cpu0_opp17: opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <4068000 20889600>;
+		};
+
+		cpu0_opp18: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <4068000 22425600>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu4_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu4_opp3: opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp5: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp6: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp7: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp8: opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp9: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp10: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 9216000>;
+		};
+
+		cpu4_opp11: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <3072000 11980800>;
+		};
+
+		cpu4_opp12: opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <4068000 11980800>;
+		};
+
+		cpu4_opp13: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 11980800>;
+		};
+
+		cpu4_opp14: opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu4_opp15: opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu4_opp16: opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <5412000 15052800>;
+		};
+
+		cpu4_opp17: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <5412000 15052800>;
+		};
+
+		cpu4_opp18: opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <5412000 19353600>;
+		};
+
+		cpu4_opp19: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu4_opp20: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu4_opp21: opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <7216000 19353600>;
+		};
+
+		cpu4_opp22: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp23: opp-2092800000 {
+			opp-hz = /bits/ 64 <2092800000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp24: opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp25: opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp26: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp27: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp28: opp-2476800000 {
+			opp-hz = /bits/ 64 <2476800000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp29: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp30: opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp31: opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <7216000 25497600>;
+		};
+
+		cpu4_opp32: opp-2803200000 {
+			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <7216000 25497600>;
+		};
+	};
+
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-328580000 {
+			opp-hz = /bits/ 64 <328580000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qspi_opp_table: opp-table-qspi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci: psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp-mem@85700000 {
+			reg = <0 0x85700000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: xbl-mem@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		aop_mem: aop-mem@85fc0000 {
+			reg = <0 0x85fc0000 0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x85fe0000 0 0x20000>;
+			no-map;
+		};
+
+		smem@86000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86000000 0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		tz_mem: tz@86200000 {
+			reg = <0 0x86200000 0 0x2d00000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@88f00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0x88f00000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		qseecom_mem: qseecom@8ab00000 {
+			reg = <0 0x8ab00000 0 0x1400000>;
+			no-map;
+		};
+
+		camera_mem: camera-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8c400000 {
+			reg = <0 0x8c400000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8c410000 {
+			reg = <0 0x8c410000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@8c415000 {
+			reg = <0 0x8c415000 0 0x2000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8c500000 {
+			reg = <0 0x8c500000 0 0x1a00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@8df00000 {
+			reg = <0 0x8df00000 0 0x100000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8e000000 {
+			reg = <0 0x8e000000 0 0x7800000>;
+			no-map;
+		};
+
+		venus_mem: venus@95800000 {
+			reg = <0 0x95800000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@95d00000 {
+			reg = <0 0x95d00000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@96500000 {
+			reg = <0 0x96500000 0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@96700000 {
+			reg = <0 0x96700000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: spss@97b00000 {
+			reg = <0 0x97b00000 0 0x100000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0 0xa0000000 0 0x20000000>;
+			size = <0 0x4000>;
+			no-map;
+		};
+
+		fastrpc_mem: fastrpc {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
+			alignment = <0x0 0x400000>;
+			size = <0x0 0x1000000>;
+			reusable;
+		};
+	};
+
+	adsp_pas: remoteproc-adsp {
+		compatible = "qcom,sdm845-adsp-pas";
+
+		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready",
+				  "handover", "stop-ack";
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+
+		memory-region = <&adsp_mem>;
+
+		qcom,qmp = <&aoss_qmp>;
+
+		qcom,smem-states = <&adsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+
+		status = "disabled";
+
+		glink-edge {
+			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+			label = "lpass";
+			qcom,remote-pid = <2>;
+			mboxes = <&apss_shared 8>;
+
+			apr {
+				compatible = "qcom,apr-v2";
+				qcom,glink-channels = "apr_audio_svc";
+				qcom,domain = <APR_DOMAIN_ADSP>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				qcom,intents = <512 20>;
+
+				service@3 {
+					reg = <APR_SVC_ADSP_CORE>;
+					compatible = "qcom,q6core";
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+				};
+
+				q6afe: service@4 {
+					compatible = "qcom,q6afe";
+					reg = <APR_SVC_AFE>;
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					q6afedai: dais {
+						compatible = "qcom,q6afe-dais";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#sound-dai-cells = <1>;
+					};
+				};
+
+				q6asm: service@7 {
+					compatible = "qcom,q6asm";
+					reg = <APR_SVC_ASM>;
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					q6asmdai: dais {
+						compatible = "qcom,q6asm-dais";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#sound-dai-cells = <1>;
+						iommus = <&apps_smmu 0x1821 0x0>;
+					};
+				};
+
+				q6adm: service@8 {
+					compatible = "qcom,q6adm";
+					reg = <APR_SVC_ADM>;
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					q6routing: routing {
+						compatible = "qcom,q6adm-routing";
+						#sound-dai-cells = <0>;
+					};
+				};
+			};
+
+			fastrpc {
+				compatible = "qcom,fastrpc";
+				qcom,glink-channels = "fastrpcglink-apps-dsp";
+				label = "adsp";
+				qcom,non-secure-domain;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				compute-cb@3 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <3>;
+					iommus = <&apps_smmu 0x1823 0x0>;
+				};
+
+				compute-cb@4 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <4>;
+					iommus = <&apps_smmu 0x1824 0x0>;
+				};
+			};
+		};
+	};
+
+	cdsp_pas: remoteproc-cdsp {
+		compatible = "qcom,sdm845-cdsp-pas";
+
+		interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready",
+				  "handover", "stop-ack";
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+
+		memory-region = <&cdsp_mem>;
+
+		qcom,qmp = <&aoss_qmp>;
+
+		qcom,smem-states = <&cdsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+
+		status = "disabled";
+
+		glink-edge {
+			interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+			label = "turing";
+			qcom,remote-pid = <5>;
+			mboxes = <&apss_shared 4>;
+			fastrpc {
+				compatible = "qcom,fastrpc";
+				qcom,glink-channels = "fastrpcglink-apps-dsp";
+				label = "cdsp";
+				qcom,non-secure-domain;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				compute-cb@1 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <1>;
+					iommus = <&apps_smmu 0x1401 0x30>;
+				};
+
+				compute-cb@2 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <2>;
+					iommus = <&apps_smmu 0x1402 0x30>;
+				};
+
+				compute-cb@3 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <3>;
+					iommus = <&apps_smmu 0x1403 0x30>;
+				};
+
+				compute-cb@4 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <4>;
+					iommus = <&apps_smmu 0x1404 0x30>;
+				};
+
+				compute-cb@5 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <5>;
+					iommus = <&apps_smmu 0x1405 0x30>;
+				};
+
+				compute-cb@6 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <6>;
+					iommus = <&apps_smmu 0x1406 0x30>;
+				};
+
+				compute-cb@7 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <7>;
+					iommus = <&apps_smmu 0x1407 0x30>;
+				};
+
+				compute-cb@8 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <8>;
+					iommus = <&apps_smmu 0x1408 0x30>;
+				};
+			};
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 26>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm845";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&pcie0_lane>,
+				 <&pcie1_lane>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SDM845_CX>;
+		};
+
+		qfprom@784000 {
+			compatible = "qcom,sdm845-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx-trim-primary@1eb {
+				reg = <0x1eb 0x1>;
+				bits = <1 4>;
+			};
+
+			qusb2s_hstx_trim: hstx-trim-secondary@1eb {
+				reg = <0x1eb 0x2>;
+				bits = <6 4>;
+			};
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x00793000 0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x0016 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>;
+			interconnect-names = "qup-core";
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart3: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart5: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart6: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			spi7: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@89c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x06d6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x6c3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>;
+			interconnect-names = "qup-core";
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart10: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart11: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart14: serial@a98000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart15: serial@a9c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		llcc: system-cache-controller@1100000 {
+			compatible = "qcom,sdm845-llcc";
+			reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>,
+			      <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+			      <0 0x01300000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma@10a2000 {
+			compatible = "qcom,sdm845-dcc", "qcom,dcc";
+			reg = <0x0 0x010a2000 0x0 0x1000>,
+			      <0x0 0x010ae000 0x0 0x2000>;
+		};
+
+		pmu@114a000 {
+			compatible = "qcom,sdm845-llcc-bwmon";
+			reg = <0 0x0114a000 0 0x1000>;
+			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/*
+				 * The interconnect path bandwidth taken from
+				 * cpu4_opp_table bandwidth for gladiator_noc-mem_noc
+				 * interconnect.  This also matches the
+				 * bandwidth table of qcom,llccbw (qcom,bw-tbl,
+				 * bus width: 4 bytes) from msm-4.9 downstream
+				 * kernel.
+				 */
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <1804000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <3072000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <5412000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <7216000>;
+				};
+			};
+		};
+
+		pmu@1436400 {
+			compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x01436400 0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/*
+				 * The interconnect path bandwidth taken from
+				 * cpu4_opp_table bandwidth for OSM L3
+				 * interconnect.  This also matches the OSM L3
+				 * from bandwidth table of qcom,cpu4-l3lat-mon
+				 * (qcom,core-dev-table, bus width: 16 bytes)
+				 * from msm-4.9 downstream kernel.
+				 */
+				opp-0 {
+					opp-peak-kBps = <4800000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <9216000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <15052800>;
+				};
+				opp-3 {
+					opp-peak-kBps = <20889600>;
+				};
+				opp-4 {
+					opp-peak-kBps = <25497600>;
+				};
+			};
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sdm845";
+			reg = <0 0x01c00000 0 0x2000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60100000 0 0x100000>,
+			      <0 0x01c07000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu";
+
+			iommu-map = <0x0   &apps_smmu 0x1c10 0x1>,
+				    <0x100 &apps_smmu 0x1c11 0x1>,
+				    <0x200 &apps_smmu 0x1c12 0x1>,
+				    <0x300 &apps_smmu 0x1c13 0x1>,
+				    <0x400 &apps_smmu 0x1c14 0x1>,
+				    <0x500 &apps_smmu 0x1c15 0x1>,
+				    <0x600 &apps_smmu 0x1c16 0x1>,
+				    <0x700 &apps_smmu 0x1c17 0x1>,
+				    <0x800 &apps_smmu 0x1c18 0x1>,
+				    <0x900 &apps_smmu 0x1c19 0x1>,
+				    <0xa00 &apps_smmu 0x1c1a 0x1>,
+				    <0xb00 &apps_smmu 0x1c1b 0x1>,
+				    <0xc00 &apps_smmu 0x1c1c 0x1>,
+				    <0xd00 &apps_smmu 0x1c1d 0x1>,
+				    <0xe00 &apps_smmu 0x1c1e 0x1>,
+				    <0xf00 &apps_smmu 0x1c1f 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sdm845-qmp-pcie-phy";
+			reg = <0 0x01c06000 0 0x18c>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: phy@1c06200 {
+				reg = <0 0x01c06200 0 0x128>,
+				      <0 0x01c06400 0 0x1fc>,
+				      <0 0x01c06800 0 0x218>,
+				      <0 0x01c06600 0 0x70>;
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sdm845";
+			reg = <0 0x01c08000 0 0x2000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40100000 0 0x100000>,
+			      <0 0x01c0c000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>,
+				    <0x200 &apps_smmu 0x1c02 0x1>,
+				    <0x300 &apps_smmu 0x1c03 0x1>,
+				    <0x400 &apps_smmu 0x1c04 0x1>,
+				    <0x500 &apps_smmu 0x1c05 0x1>,
+				    <0x600 &apps_smmu 0x1c06 0x1>,
+				    <0x700 &apps_smmu 0x1c07 0x1>,
+				    <0x800 &apps_smmu 0x1c08 0x1>,
+				    <0x900 &apps_smmu 0x1c09 0x1>,
+				    <0xa00 &apps_smmu 0x1c0a 0x1>,
+				    <0xb00 &apps_smmu 0x1c0b 0x1>,
+				    <0xc00 &apps_smmu 0x1c0c 0x1>,
+				    <0xd00 &apps_smmu 0x1c0d 0x1>,
+				    <0xe00 &apps_smmu 0x1c0e 0x1>,
+				    <0xf00 &apps_smmu 0x1c0f 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0a000 {
+			compatible = "qcom,sdm845-qhp-pcie-phy";
+			reg = <0 0x01c0a000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c06200 {
+				reg = <0 0x01c0a800 0 0x800>,
+				      <0 0x01c0a800 0 0x800>,
+				      <0 0x01c0b800 0 0x400>;
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		mem_noc: interconnect@1380000 {
+			compatible = "qcom,sdm845-mem-noc";
+			reg = <0 0x01380000 0 0x27200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		dc_noc: interconnect@14e0000 {
+			compatible = "qcom,sdm845-dc-noc";
+			reg = <0 0x014e0000 0 0x400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sdm845-config-noc";
+			reg = <0 0x01500000 0 0x5080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdm845-system-noc";
+			reg = <0 0x01620000 0 0x18080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sdm845-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sdm845-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f300>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sdm845-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x2500>,
+			      <0 0x01d90000 0 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			iommus = <&apps_smmu 0x100 0xf>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk",
+				"ice_core_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sdm845-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x18c>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_CE_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x704 0x1>,
+				 <&apps_smmu 0x706 0x1>,
+				 <&apps_smmu 0x714 0x1>,
+				 <&apps_smmu 0x716 0x1>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,crypto-v5.4";
+			reg = <0 0x01dfa000 0 0x6000>;
+			clocks = <&gcc GCC_CE1_AHB_CLK>,
+				 <&gcc GCC_CE1_AXI_CLK>,
+				 <&rpmhcc RPMH_CE_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x704 0x1>,
+				 <&apps_smmu 0x706 0x1>,
+				 <&apps_smmu 0x714 0x1>,
+				 <&apps_smmu 0x716 0x1>;
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sdm845-ipa";
+
+			iommus = <&apps_smmu 0x720 0x0>,
+				 <&apps_smmu 0x722 0x0>;
+			reg = <0 0x01e40000 0 0x7000>,
+			      <0 0x01e47000 0 0x2000>,
+			      <0 0x01e04000 0 0x2c000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "imem",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,sdm845-tcsr", "syscon";
+			reg = <0 0x01f60000 0 0x20000>;
+		};
+
+		tlmm: pinctrl@3400000 {
+			compatible = "qcom,sdm845-pinctrl";
+			reg = <0 0x03400000 0 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc_intc>;
+
+			cci0_default: cci0-default-state {
+				/* SDA, SCL */
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+
+				drive-strength = <2>; /* 2 mA */
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				/* SDA, SCL */
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+
+				drive-strength = <2>; /* 2 mA */
+				bias-pull-down;
+			};
+
+			qspi_clk: qspi-clk-state {
+				pins = "gpio95";
+				function = "qspi_clk";
+			};
+
+			qspi_cs0: qspi-cs0-state {
+				pins = "gpio90";
+				function = "qspi_cs";
+			};
+
+			qspi_cs1: qspi-cs1-state {
+				pins = "gpio89";
+				function = "qspi_cs";
+			};
+
+			qspi_data0: qspi-data0-state {
+				pins = "gpio91";
+				function = "qspi_data";
+			};
+
+			qspi_data1: qspi-data1-state {
+				pins = "gpio92";
+				function = "qspi_data";
+			};
+
+			qspi_data23: qspi-data23-state {
+				pins = "gpio93", "gpio94";
+				function = "qspi_data";
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio17", "gpio18";
+				function = "qup1";
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup2";
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio41", "gpio42";
+				function = "qup3";
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio89", "gpio90";
+				function = "qup4";
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio85", "gpio86";
+				function = "qup5";
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup6";
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio93", "gpio94";
+				function = "qup7";
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio65", "gpio66";
+				function = "qup8";
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup9";
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup10";
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio31", "gpio32";
+				function = "qup11";
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio49", "gpio50";
+				function = "qup12";
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio105", "gpio106";
+				function = "qup13";
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio33", "gpio34";
+				function = "qup14";
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio81", "gpio82";
+				function = "qup15";
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup0";
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio17", "gpio18", "gpio19", "gpio20";
+				function = "qup1";
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio27", "gpio28", "gpio29", "gpio30";
+				function = "qup2";
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "qup3";
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio89", "gpio90", "gpio91", "gpio92";
+				function = "qup4";
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio85", "gpio86", "gpio87", "gpio88";
+				function = "qup5";
+			};
+
+			qup_spi6_default: qup-spi6-default-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				function = "qup6";
+			};
+
+			qup_spi7_default: qup-spi7-default-state {
+				pins = "gpio93", "gpio94", "gpio95", "gpio96";
+				function = "qup7";
+			};
+
+			qup_spi8_default: qup-spi8-default-state {
+				pins = "gpio65", "gpio66", "gpio67", "gpio68";
+				function = "qup8";
+			};
+
+			qup_spi9_default: qup-spi9-default-state {
+				pins = "gpio6", "gpio7", "gpio4", "gpio5";
+				function = "qup9";
+			};
+
+			qup_spi10_default: qup-spi10-default-state {
+				pins = "gpio55", "gpio56", "gpio53", "gpio54";
+				function = "qup10";
+			};
+
+			qup_spi11_default: qup-spi11-default-state {
+				pins = "gpio31", "gpio32", "gpio33", "gpio34";
+				function = "qup11";
+			};
+
+			qup_spi12_default: qup-spi12-default-state {
+				pins = "gpio49", "gpio50", "gpio51", "gpio52";
+				function = "qup12";
+			};
+
+			qup_spi13_default: qup-spi13-default-state {
+				pins = "gpio105", "gpio106", "gpio107", "gpio108";
+				function = "qup13";
+			};
+
+			qup_spi14_default: qup-spi14-default-state {
+				pins = "gpio33", "gpio34", "gpio31", "gpio32";
+				function = "qup14";
+			};
+
+			qup_spi15_default: qup-spi15-default-state {
+				pins = "gpio81", "gpio82", "gpio83", "gpio84";
+				function = "qup15";
+			};
+
+			qup_uart0_default: qup-uart0-default-state {
+				qup_uart0_tx: tx-pins {
+					pins = "gpio2";
+					function = "qup0";
+				};
+
+				qup_uart0_rx: rx-pins {
+					pins = "gpio3";
+					function = "qup0";
+				};
+			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				qup_uart1_tx: tx-pins {
+					pins = "gpio19";
+					function = "qup1";
+				};
+
+				qup_uart1_rx: rx-pins {
+					pins = "gpio20";
+					function = "qup1";
+				};
+			};
+
+			qup_uart2_default: qup-uart2-default-state {
+				qup_uart2_tx: tx-pins {
+					pins = "gpio29";
+					function = "qup2";
+				};
+
+				qup_uart2_rx: rx-pins {
+					pins = "gpio30";
+					function = "qup2";
+				};
+			};
+
+			qup_uart3_default: qup-uart3-default-state {
+				qup_uart3_tx: tx-pins {
+					pins = "gpio43";
+					function = "qup3";
+				};
+
+				qup_uart3_rx: rx-pins {
+					pins = "gpio44";
+					function = "qup3";
+				};
+			};
+
+			qup_uart3_4pin: qup-uart3-4pin-state {
+				qup_uart3_4pin_cts: cts-pins {
+					pins = "gpio41";
+					function = "qup3";
+				};
+
+				qup_uart3_4pin_rts_tx: rts-tx-pins {
+					pins = "gpio42", "gpio43";
+					function = "qup3";
+				};
+
+				qup_uart3_4pin_rx: rx-pins {
+					pins = "gpio44";
+					function = "qup3";
+				};
+			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				qup_uart4_tx: tx-pins {
+					pins = "gpio91";
+					function = "qup4";
+				};
+
+				qup_uart4_rx: rx-pins {
+					pins = "gpio92";
+					function = "qup4";
+				};
+			};
+
+			qup_uart5_default: qup-uart5-default-state {
+				qup_uart5_tx: tx-pins {
+					pins = "gpio87";
+					function = "qup5";
+				};
+
+				qup_uart5_rx: rx-pins {
+					pins = "gpio88";
+					function = "qup5";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				qup_uart6_tx: tx-pins {
+					pins = "gpio47";
+					function = "qup6";
+				};
+
+				qup_uart6_rx: rx-pins {
+					pins = "gpio48";
+					function = "qup6";
+				};
+			};
+
+			qup_uart6_4pin: qup-uart6-4pin-state {
+				qup_uart6_4pin_cts: cts-pins {
+					pins = "gpio45";
+					function = "qup6";
+					bias-pull-down;
+				};
+
+				qup_uart6_4pin_rts_tx: rts-tx-pins {
+					pins = "gpio46", "gpio47";
+					function = "qup6";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				qup_uart6_4pin_rx: rx-pins {
+					pins = "gpio48";
+					function = "qup6";
+					bias-pull-up;
+				};
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				qup_uart7_tx: tx-pins {
+					pins = "gpio95";
+					function = "qup7";
+				};
+
+				qup_uart7_rx: rx-pins {
+					pins = "gpio96";
+					function = "qup7";
+				};
+			};
+
+			qup_uart8_default: qup-uart8-default-state {
+				qup_uart8_tx: tx-pins {
+					pins = "gpio67";
+					function = "qup8";
+				};
+
+				qup_uart8_rx: rx-pins {
+					pins = "gpio68";
+					function = "qup8";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default-state {
+				qup_uart9_tx: tx-pins {
+					pins = "gpio4";
+					function = "qup9";
+				};
+
+				qup_uart9_rx: rx-pins {
+					pins = "gpio5";
+					function = "qup9";
+				};
+			};
+
+			qup_uart10_default: qup-uart10-default-state {
+				qup_uart10_tx: tx-pins {
+					pins = "gpio53";
+					function = "qup10";
+				};
+
+				qup_uart10_rx: rx-pins {
+					pins = "gpio54";
+					function = "qup10";
+				};
+			};
+
+			qup_uart11_default: qup-uart11-default-state {
+				qup_uart11_tx: tx-pins {
+					pins = "gpio33";
+					function = "qup11";
+				};
+
+				qup_uart11_rx: rx-pins {
+					pins = "gpio34";
+					function = "qup11";
+				};
+			};
+
+			qup_uart12_default: qup-uart12-default-state {
+				qup_uart12_tx: tx-pins {
+					pins = "gpio51";
+					function = "qup0";
+				};
+
+				qup_uart12_rx: rx-pins {
+					pins = "gpio52";
+					function = "qup0";
+				};
+			};
+
+			qup_uart13_default: qup-uart13-default-state {
+				qup_uart13_tx: tx-pins {
+					pins = "gpio107";
+					function = "qup13";
+				};
+
+				qup_uart13_rx: rx-pins {
+					pins = "gpio108";
+					function = "qup13";
+				};
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				qup_uart14_tx: tx-pins {
+					pins = "gpio31";
+					function = "qup14";
+				};
+
+				qup_uart14_rx: rx-pins {
+					pins = "gpio32";
+					function = "qup14";
+				};
+			};
+
+			qup_uart15_default: qup-uart15-default-state {
+				qup_uart15_tx: tx-pins {
+					pins = "gpio83";
+					function = "qup15";
+				};
+
+				qup_uart15_rx: rx-pins {
+					pins = "gpio84";
+					function = "qup15";
+				};
+			};
+
+			quat_mi2s_sleep: quat-mi2s-sleep-state {
+				pins = "gpio58", "gpio59";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_active: quat-mi2s-active-state {
+				pins = "gpio58", "gpio59";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+				output-high;
+			};
+
+			quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state {
+				pins = "gpio60";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_sd0_active: quat-mi2s-sd0-active-state {
+				pins = "gpio60";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state {
+				pins = "gpio61";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_sd1_active: quat-mi2s-sd1-active-state {
+				pins = "gpio61";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state {
+				pins = "gpio62";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_sd2_active: quat-mi2s-sd2-active-state {
+				pins = "gpio62";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state {
+				pins = "gpio63";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_sd3_active: quat-mi2s-sd3-active-state {
+				pins = "gpio63";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		mss_pil: remoteproc@4080000 {
+			compatible = "qcom,sdm845-mss-pil";
+			reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended =
+				<&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+				 <&gcc GCC_PRNG_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bus", "mem", "gpll0_mss",
+				      "snoc_axi", "mnoc_axi", "prng", "xo";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+			reset-names = "mss_restart", "pdc_reset";
+
+			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+
+			power-domains = <&rpmhpd SDM845_CX>,
+					<&rpmhpd SDM845_MX>,
+					<&rpmhpd SDM845_MSS>;
+			power-domain-names = "cx", "mx", "mss";
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_region>;
+			};
+
+			mpss {
+				memory-region = <&mpss_region>;
+			};
+
+			metadata {
+				memory-region = <&mdata_mem>;
+			};
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,sdm845-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+		};
+
+		slpi_pas: remoteproc@5c00000 {
+			compatible = "qcom,sdm845-slpi-pas";
+			reg = <0 0x5c00000 0 0x4000>;
+
+			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+						"handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			power-domains = <&rpmhpd SDM845_CX>,
+					<&rpmhpd SDM845_MX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apss_shared 24>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA
+						      QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>;
+					memory-region = <&fastrpc_mem>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@0 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <0>;
+					};
+				};
+			};
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint =
+						  <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6043000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06043000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel2_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@5 {
+					reg = <5>;
+					funnel2_in5: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&funnel0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					merge_funnel_in2: endpoint {
+						remote-endpoint =
+						  <&funnel2_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06047000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint =
+						  <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					etf_in: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint =
+						  <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint =
+						  <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint =
+						  <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint =
+						  <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint =
+						  <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint =
+						  <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&funnel2_in5>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0xa0 0xf>;
+			power-domains = <&rpmhpd SDM845_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-9600000 {
+					opp-hz = /bits/ 64 <9600000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-201500000 {
+					opp-hz = /bits/ 64 <201500000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		qspi: spi@88df000 {
+			compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+			reg = <0 0x088df000 0 0x600>;
+			iommus = <&apps_smmu 0x160 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			power-domains = <&rpmhpd SDM845_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
+			status = "disabled";
+		};
+
+		slim: slim-ngd@171c0000 {
+			compatible = "qcom,slim-ngd-v2.1.0";
+			reg = <0 0x171c0000 0 0x2c000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x1806 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		lmh_cluster1: lmh@17d70800 {
+			compatible = "qcom,sdm845-lmh";
+			reg = <0 0x17d70800 0 0x400>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU4>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		lmh_cluster0: lmh@17d78800 {
+			compatible = "qcom,sdm845-lmh";
+			reg = <0 0x17d78800 0 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU0>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2p_hstx_trim>;
+		};
+
+		usb_2_hsphy: phy@88e3000 {
+			compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			nvmem-cells = <&qusb2s_hstx_trim>;
+		};
+
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x38>,
+			      <0 0x088ea000 0 0x40>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x128>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x128>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb_2_qmpphy: phy@88eb000 {
+			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+			reg = <0 0x088eb000 0 0x18c>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			usb_2_ssphy: phy@88eb200 {
+				reg = <0 0x088eb200 0 0x128>,
+				      <0 0x088eb400 0 0x1fc>,
+				      <0 0x088eb800 0 0x218>,
+				      <0 0x088eb600 0 0x70>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x740 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x760 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sdm845-venus-v2";
+			reg = <0 0x0aa00000 0 0xff000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>,
+					<&videocc VCODEC1_GDSC>,
+					<&rpmhpd SDM845_CX>;
+			power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
+			operating-points-v2 = <&venus_opp_table>;
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+			clock-names = "core", "iface", "bus",
+				      "vcodec0_core", "vcodec0_bus",
+				      "vcodec1_core", "vcodec1_bus";
+			iommus = <&apps_smmu 0x10a0 0x8>,
+				 <&apps_smmu 0x10b0 0x0>;
+			memory-region = <&venus_mem>;
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
+			interconnect-names = "video-mem", "cpu-cfg";
+
+			status = "disabled";
+
+			video-core0 {
+				compatible = "venus-decoder";
+			};
+
+			video-core1 {
+				compatible = "venus-encoder";
+			};
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-533000097 {
+					opp-hz = /bits/ 64 <533000097>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sdm845-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camss: camss@acb3000 {
+			compatible = "qcom,sdm845-camss";
+
+			reg = <0 0x0acb3000 0 0x1000>,
+				<0 0x0acba000 0 0x1000>,
+				<0 0x0acc8000 0 0x1000>,
+				<0 0x0ac65000 0 0x1000>,
+				<0 0x0ac66000 0 0x1000>,
+				<0 0x0ac67000 0 0x1000>,
+				<0 0x0ac68000 0 0x1000>,
+				<0 0x0acaf000 0 0x4000>,
+				<0 0x0acb6000 0 0x4000>,
+				<0 0x0acc4000 0 0x4000>;
+			reg-names = "csid0",
+				"csid1",
+				"csid2",
+				"csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csiphy3",
+				"vfe0",
+				"vfe1",
+				"vfe_lite";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "csid0",
+				"csid1",
+				"csid2",
+				"csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csiphy3",
+				"vfe0",
+				"vfe1",
+				"vfe_lite";
+
+			power-domains = <&clock_camcc IFE_0_GDSC>,
+				<&clock_camcc IFE_1_GDSC>,
+				<&clock_camcc TITAN_TOP_GDSC>;
+
+			clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+				<&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+				<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY0_CLK>,
+				<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY1_CLK>,
+				<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY2_CLK>,
+				<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY3_CLK>,
+				<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+				<&gcc GCC_CAMERA_AHB_CLK>,
+				<&gcc GCC_CAMERA_AXI_CLK>,
+				<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				<&clock_camcc CAM_CC_SOC_AHB_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_LITE_CLK>,
+				<&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				<&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				"cpas_ahb",
+				"cphy_rx_src",
+				"csi0",
+				"csi0_src",
+				"csi1",
+				"csi1_src",
+				"csi2",
+				"csi2_src",
+				"csiphy0",
+				"csiphy0_timer",
+				"csiphy0_timer_src",
+				"csiphy1",
+				"csiphy1_timer",
+				"csiphy1_timer_src",
+				"csiphy2",
+				"csiphy2_timer",
+				"csiphy2_timer_src",
+				"csiphy3",
+				"csiphy3_timer",
+				"csiphy3_timer_src",
+				"gcc_camera_ahb",
+				"gcc_camera_axi",
+				"slow_ahb_src",
+				"soc_ahb",
+				"vfe0_axi",
+				"vfe0",
+				"vfe0_cphy_rx",
+				"vfe0_src",
+				"vfe1_axi",
+				"vfe1",
+				"vfe1_cphy_rx",
+				"vfe1_src",
+				"vfe_lite",
+				"vfe_lite_cphy_rx",
+				"vfe_lite_src";
+
+			iommus = <&apps_smmu 0x0808 0x0>,
+				 <&apps_smmu 0x0810 0x8>,
+				 <&apps_smmu 0x0c08 0x0>,
+				 <&apps_smmu 0x0c10 0x8>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+			};
+		};
+
+		cci: cci@ac4a000 {
+			compatible = "qcom,sdm845-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4a000 0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+			clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_SOC_AHB_CLK>,
+				<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				"soc_ahb",
+				"slow_ahb_src",
+				"cpas_ahb",
+				"cci",
+				"cci_src";
+
+			assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		clock_camcc: clock-controller@ad00000 {
+			compatible = "qcom,sdm845-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm845-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+			         <&apps_smmu 0xc80 0x8>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm845-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-344000000 {
+						opp-hz = /bits/ 64 <344000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				status = "disabled";
+				compatible = "qcom,sdm845-dp";
+
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0x600>,
+				      <0 0x0ae90a00 0 0x600>,
+				      <0 0x0ae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface", "core_aux", "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm845-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm845-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		gpu: gpu@5000000 {
+			compatible = "qcom,adreno-630.2", "qcom,adreno";
+
+			reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>;
+			reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+			/*
+			 * Look ma, no clocks! The GPU clocks and power are
+			 * controlled entirely by the GMU
+			 */
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-710000000 {
+					opp-hz = /bits/ 64 <710000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <7216000>;
+				};
+
+				opp-675000000 {
+					opp-hz = /bits/ 64 <675000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
+				};
+
+				opp-596000000 {
+					opp-hz = /bits/ 64 <596000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <6220000>;
+				};
+
+				opp-520000000 {
+					opp-hz = /bits/ 64 <520000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <6220000>;
+				};
+
+				opp-414000000 {
+					opp-hz = /bits/ 64 <414000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <4068000>;
+				};
+
+				opp-342000000 {
+					opp-hz = /bits/ 64 <342000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <2724000>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1648000>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0 0x05040000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+			         <&gcc GCC_GPU_CFG_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		gmu: gmu@506a000 {
+			compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+
+			reg = <0 0x0506a000 0 0x30000>,
+			      <0 0x0b280000 0 0x10000>,
+			      <0 0x0b480000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+			         <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			status = "disabled";
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&dp_phy 0>,
+				 <&dp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc_intc: interrupt-controller@b220000 {
+			compatible = "qcom,sdm845-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		pdc_reset: reset-controller@b2e0000 {
+			compatible = "qcom,sdm845-pdc-global";
+			reg = <0 0x0b2e0000 0 0x20000>;
+			#reset-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_reset: reset-controller@c2a0000 {
+			compatible = "qcom,sdm845-aoss-cc";
+			reg = <0 0x0c2a0000 0 0x31000>;
+			#reset-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+
+			cx_cdev: cx {
+				#cooling-cells = <2>;
+			};
+
+			ebi_cdev: ebi {
+				#cooling-cells = <2>;
+			};
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,sdm845-rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		sram@146bf000 {
+			compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
+			reg = <0 0x146bf000 0 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x146bf000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		lpasscc: clock-controller@17014000 {
+			compatible = "qcom,sdm845-lpasscc";
+			reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
+			reg-names = "cc", "qdsp6ss";
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		gladiator_noc: interconnect@17900000 {
+			compatible = "qcom,sdm845-gladiator-noc";
+			reg = <0 0x17900000 0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		watchdog@17980000 {
+			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
+			reg = <0 0x17980000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		apss_shared: mailbox@17990000 {
+			compatible = "qcom,sdm845-apss-shared";
+			reg = <0 0x17990000 0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		apps_rsc: rsc@179c0000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x179c0000 0 0x10000>,
+			      <0 0x179d0000 0 0x10000>,
+			      <0 0x179e0000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdm845-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdm845-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0 0x17a40000 0 0x20000>;
+				status = "disabled";
+			};
+		};
+
+		slimbam: dma-controller@17184000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			qcom,controlled-remotely;
+			reg = <0 0x17184000 0 0x2a000>;
+			num-channels = <31>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,num-ees = <2>;
+			iommus = <&apps_smmu 0x1806 0x0>;
+		};
+
+		timer@17c90000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17c90000 0 0x1000>;
+
+			frame@17ca0000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17ca0000 0x1000>,
+				      <0x17cb0000 0x1000>;
+			};
+
+			frame@17cc0000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17cc0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17cd0000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17cd0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17ce0000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17ce0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17cf0000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17cf0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17d00000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17d00000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17d10000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17d10000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		osm_l3: interconnect@17d41000 {
+			compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
+			reg = <0 0x17d41000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@17d43000 {
+			compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			status = "disabled";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			clock-names = "cxo_ref_clk_pin";
+			clocks = <&rpmhcc RPMH_RF_CLK2>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x0040 0x1>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				q6_modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
new file mode 100644
index 0000000000..92a812b5f4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -0,0 +1,836 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Lenovo Yoga C630
+ *
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm850.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+
+/*
+ * Update following upstream (sdm845.dtsi) reserved
+ * memory mappings for firmware loading to succeed
+ * and enable the IPA device.
+ */
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+	model = "Lenovo Yoga C630";
+	compatible = "lenovo,yoga-c630", "qcom,sdm845";
+	chassis-type = "convertible";
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
+
+		switch-lid {
+			gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+
+		switch-mode {
+			gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+		};
+	};
+
+	/* Reserved memory changes for IPA */
+	reserved-memory {
+		wlan_msa_mem: memory@8c400000 {
+			reg = <0 0x8c400000 0 0x100000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8c515000 {
+			reg = <0 0x8c515000 0 0x2000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8c517000 {
+			reg = <0 0x8c517000 0 0x5a000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8c600000 {
+			reg = <0 0x8c600000 0 0x1a00000>;
+			no-map;
+		};
+	};
+
+	sw_edp_1p2: edp-1p2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sw_edp_1p2";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		pinctrl-0 = <&sw_edp_1p2_en>;
+		pinctrl-names = "default";
+
+		gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_l2a_1p2>;
+	};
+
+	sn65dsi86_refclk: sn65dsi86-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+
+		clock-frequency = <19200000>;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vlcm_3v3: regulator-vlcm-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vlcm_3v3";
+
+		vin-supply = <&vph_pwr>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&sn65dsi86 1000000>;
+		enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qcadsp850.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+
+		vreg_s2a_1p125: smps2 {
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+		};
+
+		vreg_l9a_1p8: ldo9 {
+		};
+
+		vreg_l10a_1p8: ldo10 {
+		};
+
+		vreg_l11a_1p0: ldo11 {
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+		};
+
+		vreg_l16a_2p7: ldo16 {
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3108000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+		};
+
+		vreg_l22a_2p85: ldo22 {
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3083000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3112000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+		};
+	};
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qccdsp850.mbn";
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+	/* Overwrite pinctrl-0 from sdm845.dtsi */
+	pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
+
+	tsel: hid@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	tsc2: hid@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tsc1: hid@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_hid_active>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sn65dsi86: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sn65dsi86_pin_active>;
+
+		enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+		vcca-supply = <&sw_edp_1p2>;
+		vcc-supply = <&sw_edp_1p2>;
+		vpll-supply = <&vreg_l14a_1p88>;
+		vccio-supply = <&vreg_l14a_1p88>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		no-hpd;
+		#pwm-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "boe,nv133fhm-n61";
+				backlight = <&backlight>;
+				power-supply = <&vlcm_3v3>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&sn65dsi86_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ecsh: hid@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c11_hid_active>;
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&sn65dsi86_in_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn";
+};
+
+&pm8998_gpios {
+	/* This pin is pulled down by a fixed resistor */
+	sw_edp_1p2_en: pm8998-gpio9-state {
+		pins = "gpio9";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <0>;
+	};
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_i2c12_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&sound {
+	compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
+	model = "Lenovo-YOGA-C630-13Q50";
+
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC2", "MIC BIAS2",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL3",  "MultiMedia3 Playback",
+		"MultiMedia2 Capture", "MM_UL2";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+
+	slim-wcd-dai-link {
+		link-name = "SLIM WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 2>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sn65dsi86_pin_active: sn65dsi86-enable-state {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c3_hid_active: i2c2-hid-active-state {
+		pins = "gpio37";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c5_hid_active: i2c5-hid-active-state {
+		pins = "gpio125";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c11_hid_active: i2c11-hid-active-state {
+		pins = "gpio92";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	lid_pin_active: lid-pin-state {
+		pins = "gpio124";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	mode_pin_active: mode-pin-state {
+		pins = "gpio95";
+		function = "gpio";
+
+		bias-disable;
+	};
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup_uart6_4pin>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		vddch1-supply = <&vreg_l23a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&venus {
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qcvss850.mbn";
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+
+	swm: swm@c85 {
+		left_spkr: speaker@0,3 {
+			compatible = "sdw10217211000";
+			reg = <0 3>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: speaker@0,4 {
+			compatible = "sdw10217211000";
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
+			reg = <0 4>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
+
+&crypto {
+	/* FIXME: qce_start triggers an SError */
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
new file mode 100644
index 0000000000..5438373160
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -0,0 +1,692 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Samsung Galaxy Book2
+ *
+ * Copyright (c) 2022, Xilin Wu <strongtz@yeah.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm850.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+
+/*
+ * Update following upstream (sdm845.dtsi) reserved
+ * memory mappings for firmware loading to succeed
+ */
+/delete-node/ &qseecom_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &mba_region;
+/delete-node/ &spss_mem;
+
+/ {
+	model = "Samsung Galaxy Book2";
+	compatible = "samsung,w737", "qcom,sdm845";
+	chassis-type = "convertible";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Firmware initialized the display at 1280p instead of 1440p */
+		framebuffer0: framebuffer@80400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x80400000 0 (1920 * 1280 * 4)>;
+			width = <1920>;
+			height = <1280>;
+			stride = <(1920 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	aliases {
+		serial1 = &uart6;
+	};
+
+	/* Reserved memory changes */
+	reserved-memory {
+		/* Bootloader display framebuffer region */
+		cont_splash_mem: memory@80400000 {
+			reg = <0x0 0x80400000 0x0 0x960000>;
+			no-map;
+		};
+
+		qseecom_mem: memory@8b500000 {
+			reg = <0 0x8b500000 0 0xa00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8c400000 {
+			reg = <0 0x8c400000 0 0x100000>;
+			no-map;
+		};
+
+		slpi_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8d700000 {
+			reg = <0 0x8d700000 0 0x100000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8d800000 {
+			reg = <0 0x8d800000 0 0x5000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e000000 {
+			reg = <0 0x8e000000 0 0x8000000>;
+			no-map;
+		};
+
+		adsp_mem: memory@96000000 {
+			reg = <0 0x96000000 0 0x2000000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@98000000 {
+			reg = <0 0x98000000 0 0x800000>;
+			no-map;
+		};
+
+		venus_mem: memory@98800000 {
+			reg = <0 0x98800000 0 0x500000>;
+			no-map;
+		};
+
+		mba_region: memory@98d00000 {
+			reg = <0 0x98d00000 0 0x200000>;
+			no-map;
+		};
+
+		spss_mem: memory@98f00000 {
+			reg = <0 0x98f00000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm850/samsung/w737/qcadsp850.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+
+		vreg_s2a_1p125: smps2 {
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+		};
+
+		vreg_l9a_1p8: ldo9 {
+		};
+
+		vreg_l10a_1p8: ldo10 {
+		};
+
+		vreg_l11a_1p0: ldo11 {
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+		};
+
+		vreg_l16a_2p7: ldo16 {
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_1p8: ldo18 {
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3108000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+		};
+
+		vreg_l22a_2p85: ldo22 {
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3083000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3112000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+		};
+	};
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm850/samsung/w737/qccdsp850.mbn";
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* SN65DSI86 @ 0x2c */
+	/* The panel requires dual DSI, which is not supported by the bridge driver */
+};
+
+&i2c11 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* HID-I2C Touchscreen @ 0x20 */
+};
+
+&i2c15 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	digitizer@9 {
+		compatible = "wacom,w9013", "hid-over-i2c";
+		reg = <0x9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
+
+		post-power-on-delay-ms = <120>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x1>;
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm850/samsung/w737/ipa_fws.elf";
+	status = "okay";
+};
+
+/* No idea why it causes an SError when enabled */
+&llcc {
+	status = "disabled";
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm850/samsung/w737/qcdsp1v2850.mbn", "qcom/sdm850/samsung/w737/qcdsp2850.mbn";
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_i2c12_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Samsung-W737";
+
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC2", "MIC BIAS2",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL3",  "MultiMedia3 Playback",
+		"MultiMedia2 Capture", "MM_UL2";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+
+	slim-wcd-dai-link {
+		link-name = "SLIM WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 2>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 6>, <85 4>;
+
+	pen_irq_l: pen-irq-l-state {
+		pins = "gpio119";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pen_pdct_l: pen-pdct-l-state {
+		pins = "gpio124";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-high;
+	};
+
+	pen_rst_l: pen-rst-l-state {
+		pins = "gpio21";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+
+		/*
+		 * The pen driver doesn't currently support
+		 * driving this reset line.  By specifying
+		 * output-high here we're relying on the fact
+		 * that this pin has a default pulldown at boot
+		 * (which makes sure the pen was in reset if it
+		 * was powered) and then we set it high here to
+		 * take it out of reset.  Better would be if the
+		 * pen driver could control this and we could
+		 * remove "output-high" here.
+		 */
+		output-high;
+	};
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup_uart6_4pin>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		vddch1-supply = <&vreg_l23a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/sdm850/samsung/w737/qcvss850.mbn";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+
+	swm: swm@c85 {
+		left_spkr: speaker@0,3 {
+			compatible = "sdw10217211000";
+			reg = <0 3>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: speaker@0,4 {
+			compatible = "sdw10217211000";
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
+			reg = <0 4>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm850.dtsi b/arch/arm64/boot/dts/qcom/sdm850.dtsi
new file mode 100644
index 0000000000..da9f6fbe32
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM850 SoC device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845.dtsi"
+
+&cpu4_opp_table {
+	cpu4_opp33: opp-2841600000 {
+		opp-hz = /bits/ 64 <2841600000>;
+		opp-peak-kBps = <7216000 25497600>;
+	};
+
+	cpu4_opp34: opp-2956800000 {
+		opp-hz = /bits/ 64 <2956800000>;
+		opp-peak-kBps = <7216000 25497600>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
new file mode 100644
index 0000000000..a14e0650c4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdx75.dtsi"
+#include "pm7550ba.dtsi"
+#include "pmk8550.dtsi"
+#include "pmx75.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDX75 IDP";
+	compatible = "qcom,sdx75-idp", "qcom,sdx75";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vph_ext: vph-ext-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_ext";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx75-bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vph_ext>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmx75-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-supply = <&vreg_s2b_1p224>;
+		vdd-l2-l18-supply = <&vreg_s2b_1p224>;
+		vdd-l3-supply = <&vreg_s7b_0p936>;
+		vdd-l4-l16-supply = <&vreg_s7b_0p936>;
+		vdd-l5-l6-supply = <&vreg_s4b_1p824>;
+		vdd-l7-supply = <&vreg_s7b_0p936>;
+		vdd-l8-l9-supply = <&vreg_s8b_0p824>;
+		vdd-l10-supply = <&vreg_bob_3p3>;
+		vdd-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l12-supply = <&vreg_s2b_1p224>;
+		vdd-l14-supply = <&vreg_s3b_0p752>;
+		vdd-l15-supply = <&vreg_s2b_1p224>;
+		vdd-l17-supply = <&vreg_s8b_0p824>;
+		vdd-l19-supply = <&vreg_s7b_0p936>;
+		vdd-l20-l21-supply = <&vreg_s7b_0p936>;
+
+		vreg_s2b_1p224: smps2 {
+			regulator-name = "vreg_s2b_1p224";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		vreg_s3b_0p752: smps3 {
+			regulator-name = "vreg_s3b_0p752";
+			regulator-min-microvolt = <684000>;
+			regulator-max-microvolt = <904000>;
+		};
+
+		vreg_s4b_1p824: smps4 {
+			regulator-name = "vreg_s4b_1p824";
+			regulator-min-microvolt = <1824000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_s7b_0p936: smps7 {
+			regulator-name = "vreg_s7b_0p936";
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <1060000>;
+		};
+
+		vreg_s8b_0p824: smps8 {
+			regulator-name = "vreg_s8b_0p824";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_l1b_1p2: ldo1 {
+			regulator-name = "vreg_l1b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_1p128: ldo2 {
+			regulator-name = "vreg_l2b_1p128";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1160000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p896: ldo3 {
+			regulator-name = "vreg_l3b_0p896";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p88: ldo4 {
+			regulator-name = "vreg_l4b_0p88";
+			regulator-min-microvolt = <864000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_1p776: ldo5 {
+			regulator-name = "vreg_l5b_1p776";
+			regulator-min-microvolt = <1770000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_0p904: ldo7 {
+			regulator-name = "vreg_l7b_0p904";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p8: ldo8 {
+			regulator-name = "vreg_l8b_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_0p752: ldo9 {
+			regulator-name = "vreg_l9b_0p752";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_3p08: ldo10 {
+			regulator-name = "vreg_l10b_3p08";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p8: ldo11 {
+			regulator-name = "vreg_l11b_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_1p8: ldo13 {
+			regulator-name = "vreg_l13b_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_0p624: ldo14 {
+			regulator-name = "vreg_l14b_0p624";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p2: ldo15 {
+			regulator-name = "vreg_l15b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_0p912: ldo16 {
+			regulator-name = "vreg_l16b_0p912";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_0p752: ldo17 {
+			regulator-name = "vreg_l17b_0p752";
+			regulator-min-microvolt = <684000>;
+			regulator-max-microvolt = <957600>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_0p952: ldo19 {
+			regulator-name = "vreg_l19b_0p952";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20b_0p912: ldo20 {
+			regulator-name = "vreg_l20b_0p912";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21b_0p856: ldo21 {
+			regulator-name = "vreg_l21b_0p856";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&chosen {
+	stdout-path = "serial0:115200n8";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <110 6>;
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
new file mode 100644
index 0000000000..e180aa4023
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX75 SoC device tree source
+ *
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&intc>;
+
+	chosen: chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_0>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_100>;
+
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_200>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_300>;
+
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_OFF: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <235>;
+				exit-latency-us = <428>;
+				min-residency-us = <1774>;
+				arm,psci-suspend-param = <0x40000003>;
+				local-timer-stop;
+			};
+
+			CPU_RAIL_OFF: cpu-rail-sleep-1 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <800>;
+				exit-latency-us = <750>;
+				min-residency-us = <4090>;
+				arm,psci-suspend-param = <0x40000004>;
+				local-timer-stop;
+			};
+
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <1050>;
+				exit-latency-us = <2500>;
+				min-residency-us = <5309>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41001344>;
+				entry-latency-us = <2761>;
+				exit-latency-us = <3964>;
+				min-residency-us = <8467>;
+			};
+
+			CLUSTER_SLEEP_2: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100b344>;
+				entry-latency-us = <2793>;
+				exit-latency-us = <4023>;
+				min-residency-us = <9826>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sdx75", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1 &CLUSTER_SLEEP_2>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x800000>;
+			no-map;
+		};
+
+		hyp_elf_package_mem: hyp-elf-package@80800000 {
+			reg = <0x0 0x80800000 0x0 0x200000>;
+			no-map;
+		};
+
+		access_control_db_mem: access-control-db@81380000 {
+			reg = <0x0 0x81380000 0x0 0x80000>;
+			no-map;
+		};
+
+		qteetz_mem: qteetz@814e0000 {
+			reg = <0x0 0x814e0000 0x0 0x2a0000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@81780000 {
+			reg = <0x0 0x81780000 0x0 0xa00000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@87a00000 {
+			reg = <0x0 0x87a00000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw@87c00000 {
+			reg = <0x0 0x87c00000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@87d00000 {
+			reg = <0x0 0x87d00000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@87d40000 {
+			reg = <0x0 0x87d40000 0x0 0x40000>;
+			no-map;
+		};
+
+		modem_efs_shared_mem: modem-efs-shared@87d80000 {
+			reg = <0x0 0x87d80000 0x0 0x10000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@87e00000 {
+			reg = <0x0 0x87e00000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: smem@87e20000 {
+			reg = <0x0 0x87e20000 0x0 0xc0000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@87ee0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x87ee0000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@87f00000 {
+			reg = <0x0 0x87f00000 0x0 0x20000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@87f20000 {
+			reg = <0x0 0x87f20000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_mem: secdata@87f30000 {
+			reg = <0x0 0x87f30000 0x0 0x1000>;
+			no-map;
+		};
+
+		tme_crashdump_mem: tme-crashdump@87f31000 {
+			reg = <0x0 0x87f31000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@87f71000 {
+			reg = <0x0 0x87f71000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@87f75000 {
+			reg = <0x0 0x87f75000 0x0 0x10000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@88800000 {
+			reg = <0x0 0x88800000 0x0 0x300000>;
+			no-map;
+		};
+
+		audio_heap_mem: audio-heap@88b00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x88b00000 0x0 0x400000>;
+			no-map;
+		};
+
+		mpss_dsmharq_mem: mpss-dsmharq@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x5080000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@8df80000 {
+			reg = <0x0 0x8df80000 0x0 0x80000>;
+			no-map;
+		};
+
+		mpssadsp_mem: mpssadsp@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0xf400000>;
+			no-map;
+		};
+
+		gunyah_trace_buffer_mem: gunyah-trace-buffer@bdb00000 {
+			reg = <0x0 0xbdb00000 0x0 0x2000000>;
+			no-map;
+		};
+
+		smmu_debug_buf_mem: smmu-debug-buf@bfb00000 {
+			reg = <0x0 0xbfb00000 0x0 0x100000>;
+			no-map;
+		};
+
+		hyp_smmu_s2_pt_mem: hyp-smmu-s2-pt@bfc00000 {
+			reg = <0x0 0xbfc00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	smem: qcom,smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@80000 {
+			compatible = "qcom,sdx75-gcc";
+			reg = <0x0 0x0080000 0x0 0x1f7400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			iommus = <&apps_smmu 0xe3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart1: serial@984000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qupv3_se1_2uart_active>;
+				pinctrl-1 = <&qupv3_se1_2uart_sleep>;
+				pinctrl-names = "default",
+						"sleep";
+				status = "disabled";
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sdx75-pdc", "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>,
+			      <0x0 0x174000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 147 52>,
+					  <52 266 32>,
+					  <84 500 59>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c400000 0x0 0x3000>,
+			      <0x0 0x0c500000 0x0 0x400000>,
+			      <0x0 0x0c440000 0x0 0x80000>,
+			      <0x0 0x0c4c0000 0x0 0x10000>,
+			      <0x0 0x0c42d000 0x0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,sdx75-tlmm";
+			reg = <0x0 0x0f000000 0x0 0x400000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 133>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			qupv3_se1_2uart_active: qupv3-se1-2uart-active-state {
+				tx-pins {
+					pins = "gpio12";
+					function = "qup_se1_l2_mira";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio13";
+					function = "qup_se1_l3_mira";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qupv3_se1_2uart_sleep: qupv3-se1-2uart-sleep-state {
+				pins = "gpio12", "gpio13";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdx75-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			reg = <0x0 0x17200000 0x0 0x10000>,
+			      <0x0 0x17260000 0x0 0x80000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&CLUSTER_PD>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>,
+					  <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>,
+					  <CONTROL_TCS   0>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdx75-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdx75-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sdx75-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0x0 0x17d91000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GPLL0>;
+			clock-names = "xo",
+				      "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
new file mode 100644
index 0000000000..75951fd439
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+	model = "OnePlus Nord N100";
+	compatible = "oneplus,billie2", "qcom,sm4250";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	aliases {
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+			width = <720>;
+			height = <1600>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+};
+
+&reserved_memory {
+	bootloader_log_mem: memory@5fff7000 {
+		reg = <0x0 0x5fff7000 0x0 0x8000>;
+		no-map;
+	};
+
+	ramoops@cbe00000 {
+		compatible = "ramoops";
+		reg = <0x0 0xcbe00000 0x0 0x400000>;
+		record-size = <0x40000>;
+		pmsg-size = <0x200000>;
+		console-size = <0x40000>;
+		ftrace-size = <0x40000>;
+	};
+
+	param_mem: memory@cc200000 {
+		reg = <0x0 0xcc200000 0x0 0x100000>;
+		no-map;
+	};
+
+	mtp_mem: memory@cc300000 {
+		reg = <0x00 0xcc300000 0x00 0xb00000>;
+		no-map;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l11a>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi
new file mode 100644
index 0000000000..c5add8f44f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include "sm6115.dtsi"
+
+&CPU0 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU1 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU2 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU3 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU4 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU5 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU6 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU7 {
+	compatible = "qcom,kryo240";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
new file mode 100644
index 0000000000..00a1c81ca3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm4450.dtsi"
+/ {
+	model = "Qualcomm Technologies, Inc. SM4450 QRD";
+	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
+
+	aliases { };
+
+	chosen {
+		bootargs = "console=hvc0";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
new file mode 100644
index 0000000000..c4e5b33f51
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks{
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <800>;
+				exit-latency-us = <750>;
+				min-residency-us = <4090>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1550>;
+				min-residency-us = <4791>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <1050>;
+				exit-latency-us = <2500>;
+				min-residency-us = <5309>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41003344>;
+				entry-latency-us = <1561>;
+				exit-latency-us = <2801>;
+				min-residency-us = <8550>;
+			};
+		};
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0xa0000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm4450-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 94>, <94 494 31>,
+					  <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17260000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
new file mode 100644
index 0000000000..9b70a87906
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+/dts-v1/;
+
+#include "sm6115.dtsi"
+#include "pm6125.dtsi"
+#include <dt-bindings/arm/qcom,ids.h>
+
+/ {
+	model = "F(x)tec Pro1X (QX1050)";
+	compatible = "fxtec,pro1x", "qcom,sm6115";
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_SM6115 0x10000>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>;
+			width = <1080>;
+			height = <2160>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+};
+
+&dispcc {
+	/* HACK: disable until a panel driver is ready to retain simplefb */
+	status = "disabled";
+};
+
+&pm6125_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		pm6125_s6a: s6 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		pm6125_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		pm6125_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm6125_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm6125_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		pm6125_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		pm6125_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		pm6125_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		pm6125_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		pm6125_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		pm6125_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1384000>;
+		};
+
+		pm6125_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1312000>;
+		};
+
+		pm6125_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		pm6125_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l23a: l23 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <14 4>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&pm6125_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&pm6125_l11a>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&pm6125_l4a>;
+	vdda-pll-supply = <&pm6125_l12a>;
+	vddp-ref-clk-supply = <&pm6125_l18a>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&pm6125_l4a>;
+	vdda-pll-supply = <&pm6125_l12a>;
+	vdda-phy-dpdm-supply = <&pm6125_l15a>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
new file mode 100644
index 0000000000..839c603512
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -0,0 +1,3020 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6115.h>
+#include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+#include <dt-bindings/clock/qcom,sm6115-gpucc.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			clocks = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			clocks = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			clocks = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <290>;
+				exit-latency-us = <376>;
+				min-residency-us = <1182>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <297>;
+				exit-latency-us = <324>;
+				min-residency-us = <1110>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_0_SLEEP_0: cluster-sleep-0-0 {
+				/* GDHS */
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x40000022>;
+				entry-latency-us = <360>;
+				exit-latency-us = <421>;
+				min-residency-us = <782>;
+			};
+
+			CLUSTER_0_SLEEP_1: cluster-sleep-0-1 {
+				/* Power Collapse */
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <800>;
+				exit-latency-us = <2118>;
+				min-residency-us = <7376>;
+			};
+
+			CLUSTER_1_SLEEP_0: cluster-sleep-1-0 {
+				/* GDHS */
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x40000042>;
+				entry-latency-us = <314>;
+				exit-latency-us = <345>;
+				min-residency-us = <660>;
+			};
+
+			CLUSTER_1_SLEEP_1: cluster-sleep-1-1 {
+				/* Power Collapse */
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <640>;
+				exit-latency-us = <1654>;
+				min-residency-us = <8094>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6115", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_0_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_0_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_0_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_0_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_1_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_1_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_1_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_1_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_0_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_0_SLEEP_0>, <&CLUSTER_0_SLEEP_1>;
+		};
+
+		CLUSTER_1_PD: power-domain-cpu-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_1_SLEEP_0>, <&CLUSTER_1_SLEEP_1>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,sm6115-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-sm6115";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,sm6115-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_min_svs: opp1 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp2 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp4 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp5 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp7 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@46000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		cdsp_sec_mem: memory@46200000 {
+			reg = <0x0 0x46200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x6900000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@51400000 {
+			reg = <0x0 0x51400000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@51900000 {
+			reg = <0x0 0x51900000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@51a00000 {
+			reg = <0x0 0x51a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@53800000 {
+			reg = <0x0 0x53800000 0x0 0x2800000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@56100000 {
+			reg = <0x0 0x56100000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@56110000 {
+			reg = <0x0 0x56110000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@56115000 {
+			reg = <0x0 0x56115000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_memory: memory@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_memory: memory@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		removed_mem: memory@60000000 {
+			reg = <0x0 0x60000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@89b01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x89b01000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 30>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6115-tlmm";
+			reg = <0x0 0x00500000 0x0 0x400000>,
+			      <0x0 0x00900000 0x0 0x400000>,
+			      <0x0 0x00d00000 0x0 0x400000>;
+			reg-names = "west", "south", "east";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 114>; /* GPIOs + ufs_reset */
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-sm6115";
+			reg = <0x0 0x01400000 0x0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_hsphy: phy@1613000 {
+			compatible = "qcom,sm6115-qusb2-phy";
+			reg = <0x0 0x01613000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01b04000 0x0 0x24000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x92 0>,
+				 <&apps_smmu 0x94 0x11>,
+				 <&apps_smmu 0x96 0x11>,
+				 <&apps_smmu 0x98 0x1>,
+				 <&apps_smmu 0x9F 0>;
+		};
+
+		crypto: crypto@1b3a000 {
+			compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0 0x01b3a000 0x0 0x6000>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x92 0>,
+				 <&apps_smmu 0x94 0x11>,
+				 <&apps_smmu 0x96 0x11>,
+				 <&apps_smmu 0x98 0x1>,
+				 <&apps_smmu 0x9F 0>;
+		};
+
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,sm6115-qmp-usb3-phy";
+			reg = <0x0 0x01615000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		qfprom@1b40000 {
+			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
+			reg = <0x0 0x01b40000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 4>;
+			};
+
+			gpu_speed_bin: gpu-speed-bin@6006 {
+				reg = <0x6006 0x2>;
+				bits = <5 8>;
+			};
+		};
+
+		rng: rng@1b53000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x0 0x01b53000 0x0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x01c40000 0x0 0x1100>,
+			      <0x0 0x01e00000 0x0 0x2000000>,
+			      <0x0 0x03e00000 0x0 0x100000>,
+			      <0x0 0x03f00000 0x0 0xa0000>,
+			      <0x0 0x01c0a000 0x0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */
+			      <0x0 0x04410000 0x0 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x0 0x045f0000 0x0 0x7000>;
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x0 0x04690000 0x0 0x10000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04744000 0x0 0x1000>,
+			      <0x0 0x04745000 0x0 0x1000>,
+			      <0x0 0x04748000 0x0 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			bus-width = <8>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04784000 0x0 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0x00a0 0x0>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			bus-width = <4>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_hc: ufs@4804000 {
+			compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			iommus = <&apps_smmu 0x100 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible = "qcom,sm6115-qmp-ufs-phy";
+			reg = <0x0 0x04807000 0x0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@4807400 {
+				reg = <0x0 0x04807400 0x0 0x098>,
+				      <0x0 0x04807600 0x0 0x130>,
+				      <0x0 0x04807c00 0x0 0x16c>;
+				#phy-cells = <0>;
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x04a00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0xf>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0xe3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@4a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb: usb@4ef8800 {
+			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
+			reg = <0x0 0x04ef8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <66666667>;
+
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x04e00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				iommus = <&apps_smmu 0x120 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+			};
+		};
+
+		gpu: gpu@5900000 {
+			compatible = "qcom,adreno-610.0", "qcom,adreno";
+			reg = <0x0 0x05900000 0x0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			/* There's no (real) GMU, so we have to handle quite a bunch of clocks! */
+			clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_BIMC_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "gmu",
+				      "xo";
+
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 1>;
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			qcom,gmu = <&gmu_wrapper>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-supported-hw = <0x1f>;
+				};
+
+				opp-465000000 {
+					opp-hz = /bits/ 64 <465000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-supported-hw = <0x1f>;
+				};
+
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-supported-hw = <0x1f>;
+				};
+
+				opp-745000000 {
+					opp-hz = /bits/ 64 <745000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-820000000 {
+					opp-hz = /bits/ 64 <820000000>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+					opp-supported-hw = <0x7>;
+				};
+
+				opp-900000000 {
+					opp-hz = /bits/ 64 <900000000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-supported-hw = <0x7>;
+				};
+
+				/* Speed bin 2 can reach 950 Mhz instead of 980 like the rest. */
+				opp-950000000 {
+					opp-hz = /bits/ 64 <950000000>;
+					required-opps = <&rpmpd_opp_turbo_plus>;
+					opp-supported-hw = <0x4>;
+				};
+
+				opp-980000000 {
+					opp-hz = /bits/ 64 <980000000>;
+					required-opps = <&rpmpd_opp_turbo_plus>;
+					opp-supported-hw = <0x3>;
+				};
+			};
+		};
+
+		gmu_wrapper: gmu@596a000 {
+			compatible = "qcom,adreno-gmu-wrapper";
+			reg = <0x0 0x0596a000 0x0 0x30000>;
+			reg-names = "gmu";
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+		};
+
+		gpucc: clock-controller@5990000 {
+			compatible = "qcom,sm6115-gpucc";
+			reg = <0x0 0x05990000 0x0 0x9000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@59a0000 {
+			compatible = "qcom,sm6115-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x059a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "mem",
+				      "hlos",
+				      "iface";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,sm6115-mdss";
+			reg = <0x0 0x05e00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,sm6115-dpu";
+				reg = <0x0 0x05e01000 0x0 0x8f000>,
+				      <0x0 0x05eb0000 0x0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "rot",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x05e94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x0 0x05e94400 0x0 0x100>,
+				      <0x0 0x05e94500 0x0 0x300>,
+				      <0x0 0x05e94800 0x0 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,sm6115-dispcc";
+			reg = <0x0 0x05f00000 0 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		remoteproc_mpss: remoteproc@6080000 {
+			compatible = "qcom,sm6115-mpss-pas";
+			reg = <0x0 0x06080000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 12>;
+			};
+		};
+
+		stm@8002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x08002000 0x0 0x1000>,
+			      <0x0 0x0e280000 0x0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel_in0_in>;
+					};
+				};
+			};
+		};
+
+		cti0: cti@8010000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08010000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti1: cti@8011000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08011000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti2: cti@8012000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08012000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti3: cti@8013000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08013000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti4: cti@8014000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08014000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti5: cti@8015000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08015000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti6: cti@8016000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08016000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti7: cti@8017000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08017000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti8: cti@8018000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08018000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti9: cti@8019000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08019000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti10: cti@801a000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801a000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti11: cti@801b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801b000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti12: cti@801c000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801c000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti13: cti@801d000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801d000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti14: cti@801e000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801e000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti15: cti@801f000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801f000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		replicator@8046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x08046000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@8047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x08047000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etr@8048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x08048000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@8041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x08041000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					funnel_in0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_in0_in: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@8042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x08042000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					funnel_in1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_in1_in: endpoint {
+						remote-endpoint = <&funnel_apss1_out>;
+					};
+				};
+			};
+		};
+
+		funnel@8045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x08045000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel_in0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel_in1_out>;
+					};
+				};
+			};
+		};
+
+		etm@9040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09040000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU0>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in0>;
+					};
+				};
+			};
+		};
+
+		etm@9140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09140000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU1>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in1>;
+					};
+				};
+			};
+		};
+
+		etm@9240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09240000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU2>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in2>;
+					};
+				};
+			};
+		};
+
+		etm@9340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09340000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU3>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in3>;
+					};
+				};
+			};
+		};
+
+		etm@9440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09440000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU4>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in4>;
+					};
+				};
+			};
+		};
+
+		etm@9540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09540000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU5>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in5>;
+					};
+				};
+			};
+		};
+
+		etm@9640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09640000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU6>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in6>;
+					};
+				};
+			};
+		};
+
+		etm@9740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09740000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU7>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@9800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x09800000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					funnel_apss0_out: endpoint {
+						remote-endpoint = <&funnel_apss1_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_apss0_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_apss0_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_apss0_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_apss0_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					funnel_apss0_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					funnel_apss0_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					funnel_apss0_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel_apss0_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@9810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x09810000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					funnel_apss1_out: endpoint {
+						remote-endpoint = <&funnel_in1_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_apss1_in: endpoint {
+						remote-endpoint = <&funnel_apss0_out>;
+					};
+				};
+			};
+		};
+
+		remoteproc_adsp: remoteproc@ab00000 {
+			compatible = "qcom,sm6115-adsp-pas";
+			reg = <0x0 0x0ab00000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6115_VDD_LPI_CX>,
+					<&rpmpd SM6115_VDD_LPI_MX>;
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 8>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x01c3 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x01c4 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x01c5 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x01c6 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x01c7 0x0>;
+					};
+				};
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@b300000 {
+			compatible = "qcom,sm6115-cdsp-pas";
+			reg = <0x0 0x0b300000 0x0 0x100000>;
+
+			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+				mboxes = <&apcs_glb 28>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0c01 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0c02 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0c03 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x0c04 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x0c05 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x0c06 0x0>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x0c600000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x0 0x0c800000 0x0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x1a0 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		watchdog@f017000 {
+			compatible = "qcom,apss-wdt-sm6115", "qcom,kpss-wdt";
+			reg = <0x0 0x0f017000 0x0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,sm6115-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
+			reg = <0x0 0x0f111000 0x0 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x0f120000 0x0 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-frequency = <19200000>;
+
+			frame@f121000 {
+				reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@f123000 {
+				reg = <0x0 0x0f123000 0x0 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f124000 {
+				reg = <0x0 0x0f124000 0x0 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f125000 {
+				reg = <0x0 0x0f125000 0x0 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f126000 {
+				reg = <0x0 0x0f126000 0x0 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f127000 {
+				reg = <0x0 0x0f127000 0x0 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f128000 {
+				reg = <0x0 0x0f128000 0x0 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,
+			      <0x0 0x0f300000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cpufreq_hw: cpufreq@f521000 {
+			compatible = "qcom,sm6115-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0x0 0x0f521000 0x0 0x1000>,
+			      <0x0 0x0f523000 0x0 0x1000>;
+
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		mapss-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp-hvx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu45-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu45_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu45_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu45_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu67-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu67_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu67_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu67_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0123-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu0123_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0123_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0123_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		display-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
new file mode 100644
index 0000000000..c2d15fc6c9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2022 Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm6115.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Lenovo Tab P11";
+	compatible = "lenovo,j606f", "qcom,sm6115p", "qcom,sm6115";
+	chassis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <445 0x10000>, <420 0x10000>;
+	qcom,board-id = <34 3>;
+
+	aliases {
+		mmc0 = &sdhc_2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (2000 * 1200 * 4)>;
+			width = <1200>;
+			height = <2000>;
+			stride = <(1200 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_n>;
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm6125_l18>;
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "lenovo,j606f-boe-nt36523w", "novatek,nt36523w";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+		vddio-supply = <&pm6125_l9>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&te_active &mdss_dsi_active>;
+
+		rotation = <180>; /* Yep, it's mounted upside down! */
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pm6125_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/modem.mbn";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		pm6125_s6: s6 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		pm6125_s7: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2080000>;
+		};
+
+		pm6125_s8: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l1: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm6125_l4: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm6125_l5: l5 {
+			regulator-min-microvolt = <1648000>;
+			/* 3.056V capped to 2.96V for SDHCI */
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+			/* Broken hw, this one can't be turned off or SDHCI will break! */
+			regulator-always-on;
+		};
+
+		pm6125_l6: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		pm6125_l7: l7 {
+			/* 1.2V-1.304V fixed at 1.256V for SDHCI bias */
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			/*
+			 * TODO: SDHCI seems to also work with this one turned off, however
+			 * there exists a possibility that it may not work with some very
+			 * specific SDCard types, perhaps validating this against a wide
+			 * range of models could rule that out, saving some power would
+			 * certainly be nice..
+			 */
+			regulator-always-on;
+		};
+
+		pm6125_l8: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		pm6125_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l10: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l11: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		pm6125_l12: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		pm6125_l13: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		pm6125_l14: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l15: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		pm6125_l16: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l17: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1384000>;
+		};
+
+		pm6125_l18: l18 {
+			/* 1.104V-1.312V fixed @ 1.232V for DSIPHY */
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1232000>;
+		};
+
+		pm6125_l19: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l20: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l21: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		pm6125_l22: l22 {
+			regulator-min-microvolt = <2952000>;
+			/* 3.304V capped to 2.96V for SDHCI */
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+			/* Broken hw, this one can't be turned off or SDHCI will break! */
+			regulator-always-on;
+		};
+
+		pm6125_l23: l23 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_gate_pin>;
+	pinctrl-1 = <&sdc2_state_off>;
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+
+	/*
+	 * This is a wholly undocumented pin (other than a single vague "pwr-gpios" reference)
+	 * that needs to be toggled for the SD Card slot to work properly..
+	 */
+	sdc2_gate_pin: sdc2-gate-state {
+		pins = "gpio45";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-high;
+	};
+
+	te_active: te-active-state {
+		pins = "gpio81";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_dsi_active: dsi-active-state {
+		pins = "gpio82";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&pm6125_l24>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&pm6125_l11>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&pm6125_l4>;
+	vdda-pll-supply = <&pm6125_l12>;
+	vddp-ref-clk-supply = <&pm6125_l18>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_hsphy {
+	vdd-supply = <&pm6125_l4>;
+	vdda-pll-supply = <&pm6125_l12>;
+	vdda-phy-dpdm-supply = <&pm6125_l15>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pm6125_l8>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l17>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	qcom,ath10k-calibration-variant = "Lenovo_P11";
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
new file mode 100644
index 0000000000..fb4cba0043
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -0,0 +1,485 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm6125.dtsi"
+#include "pm6125.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
+	qcom,board-id = <34 0>;
+
+	model = "Sony Xperia 10 II";
+	compatible = "sony,pdx201", "qcom,sm6125";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
+			width = <1080>;
+			height = <2520>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_down_n>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		debug_mem: memory@ffb00000 {
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: memory@ffbc0000 {
+			reg = <0x0 0xffbc0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc40000 0x0 0xc0000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+		};
+
+		cmdline_mem: memory@ffd00000 {
+			reg = <0x0 0xffd40000 0x0 0x1000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		rf-pa0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <5000>;
+			thermal-sensors = <&pm6125_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rf-pa1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&pm6125_l7>;
+	vdda-pll-supply = <&pm6125_l10>;
+	vdda-phy-dpdm-supply = <&pm6125_l15>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* NXP PN553 NFC @ 28 */
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Samsung touchscreen @ 48 */
+};
+
+&i2c3 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
+};
+
+&pm6125_adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "rf_pa0_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "quiet_therm";
+	};
+
+	channel@52 {
+		reg = <ADC5_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "camera_flash_therm";
+	};
+
+	channel@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "emmc_ufs_therm";
+	};
+
+	channel@55 {
+		reg = <ADC5_GPIO4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "rf_pa1_therm";
+	};
+};
+
+&pm6125_adc_tm {
+	status = "okay";
+
+	rf-pa0-therm@0 {
+		reg = <0>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	xo-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	rf-pa1-therm@3 {
+		reg = <3>;
+		io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6125_gpios {
+	camera_flash_therm: camera-flash-therm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	emmc_ufs_therm: emmc-ufs-therm-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	rf_pa1_therm: rf-pa1-therm-state {
+		pins = "gpio7";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vdd_l2_l3_l4-supply = <&pm6125_l7>;
+		vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>;
+
+		/*
+		 * S3/S4 is VDD_CX
+		 * S5 is VDD_MX/WCSS_MX
+		 */
+
+		pm6125_s6: s6 {
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <1422000>;
+		};
+
+		pm6125_l1: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		pm6125_l2: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1056000>;
+		};
+
+		pm6125_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1064000>;
+		};
+
+		pm6125_l4: l4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pm6125_l5: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l6: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		pm6125_l7: l7 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pm6125_l8: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		pm6125_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		pm6125_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		pm6125_l11: l11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1996000>;
+		};
+
+		pm6125_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+		};
+
+		pm6125_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l15: l15 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		pm6125_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l17: l17 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l18: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1264000>;
+		};
+
+		pm6125_l19: l19 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		pm6125_l20: l20 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		pm6125_l21: l21 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2856000>;
+		};
+
+		pm6125_l22: l22 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24: l24 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm6125_l24>;
+	vqmmc-supply = <&pm6125_l11>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <22 2>, <28 6>;
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
new file mode 100644
index 0000000000..272bc85f17
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "sm6125.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Xiaomi Mi A3";
+	compatible = "xiaomi,laurel-sprout", "qcom,sm6125";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <394 0>; /* sm6125 v1 */
+	qcom,board-id = <11 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1560 * 720 * 4)>;
+			width = <720>;
+			height = <1560>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	reserved-memory {
+		debug_mem: debug@ffb00000 {
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0x0 0xffbc0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc40000 0x0 0xc0000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+		};
+
+		cmdline_mem: memory@ffd00000 {
+			reg = <0x0 0xffd40000 0x0 0x1000>;
+			no-map;
+		};
+	};
+
+	extcon_usb: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	thermal-zones {
+		rf-pa0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <5000>;
+			thermal-sensors = <&pm6125_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l10a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&pm6125_adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>;
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "rf_pa0_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "quiet_therm";
+	};
+
+	channel@52 {
+		reg = <ADC5_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "camera_flash_therm";
+	};
+
+	channel@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "emmc_ufs_therm";
+	};
+};
+
+&pm6125_adc_tm {
+	status = "okay";
+
+	rf-pa0-therm@0 {
+		reg = <0>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	xo-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6125_gpios {
+	camera_flash_therm: camera-flash-therm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	emmc_ufs_therm: emmc-ufs-therm-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	vol_up_n: vol-up-n-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <1422000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		vreg_l2a: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1056000>;
+		};
+
+		vreg_l3a: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1064000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1996000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1264000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2856000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <22 2>, <28 6>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vccq2-supply = <&vreg_l11a>;
+	vcc-max-microamp = <600000>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l10a>;
+	vdda-phy-max-microamp = <51400>;
+	vdda-pll-max-microamp = <14200>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
new file mode 100644
index 0000000000..07081088ba
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -0,0 +1,1371 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6125.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6125", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@40000000 {
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+		device_type = "memory";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,sm6125-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-sm6125";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,sm6125-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@46000000 {
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+		};
+
+		reserved_mem1: memory@46200000 {
+			reg = <0x0 0x46200000 0x0 0x2d00000>;
+			no-map;
+		};
+
+		camera_mem: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x500000>;
+			no-map;
+		};
+
+		modem_mem: memory@4b000000 {
+			reg = <0x0 0x4b000000 0x0 0x7e00000>;
+			no-map;
+		};
+
+		venus_mem: memory@52e00000 {
+			reg = <0x0 0x52e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@53300000 {
+			reg = <0x0 0x53300000 0x0 0x200000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@53500000 {
+			reg = <0x0 0x53500000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		adsp_pil_mem: memory@55300000 {
+			reg = <0x0 0x55300000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@57100000 {
+			reg = <0x0 0x57100000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@57110000 {
+			reg = <0x0 0x57110000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@57115000 {
+			reg = <0x0 0x57115000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_mem: memory@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		cdsp_sec_mem: memory@5f800000 {
+			reg = <0x0 0x5f800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		qseecom_mem: memory@5e400000 {
+			reg = <0x0 0x5e400000 0x0 0x1400000>;
+			no-map;
+		};
+
+		sdsp_mem: memory@f3000000 {
+			reg = <0x0 0xf3000000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_mem: memory@f3400000 {
+			reg = <0x0 0xf3400000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_ta_mem: memory@13fc00000 {
+			reg = <0x1 0x3fc00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	smem: smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00 0xffffffff>;
+		compatible = "simple-bus";
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x00340000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6125-tlmm";
+			reg = <0x00500000 0x400000>,
+			      <0x00900000 0x400000>,
+			      <0x00d00000 0x400000>;
+			reg-names = "west", "south", "east";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c0_sleep: qup-i2c0-sleep-state {
+				pins = "gpio0", "gpio1";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c1_sleep: qup-i2c1-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c2_sleep: qup-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup03";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c3_sleep: qup-i2c3-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c4_sleep: qup-i2c4-sleep-state {
+				pins = "gpio16", "gpio17";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio22", "gpio23";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c5_sleep: qup-i2c5-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio30", "gpio31";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c6_sleep: qup-i2c6-sleep-state {
+				pins = "gpio30", "gpio31";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c7_sleep: qup-i2c7-sleep-state {
+				pins = "gpio28", "gpio29";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio18", "gpio19";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c8_sleep: qup-i2c8-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio10", "gpio11";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c9_sleep: qup-i2c9-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup00";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_sleep: qup-spi0-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "qup02";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_sleep: qup-spi2-sleep-state {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio22", "gpio23", "gpio24", "gpio25";
+				function = "qup10";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_sleep: qup-spi5-sleep-state {
+				pins = "gpio22", "gpio23", "gpio24", "gpio25";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_default: qup-spi6-default-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "qup11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_sleep: qup-spi6-sleep-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_default: qup-spi8-default-state {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "qup13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_sleep: qup-spi8-sleep-state {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_default: qup-spi9-default-state {
+				pins = "gpio10", "gpio11", "gpio12", "gpio13";
+				function = "qup14";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_sleep: qup-spi9-sleep-state {
+				pins = "gpio10", "gpio11", "gpio12", "gpio13";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-sm6125";
+			reg = <0x01400000 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+		};
+
+		hsusb_phy1: phy@1613000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x01613000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			status = "disabled";
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x045f0000 0x7000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x160 0x0>;
+
+			power-domains = <&rpmpd SM6125_VDDCX>;
+
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040873>;
+
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04784000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x180 0x0>;
+
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
+			power-domains = <&rpmpd SM6125_VDDCX>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040873>;
+
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@4804000 {
+			compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+			freq-table-hz = <50000000 240000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+			#reset-cells = <1>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			lanes-per-direction = <1>;
+
+			iommus = <&apps_smmu 0x200 0x0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible = "qcom,sm6125-qmp-ufs-phy";
+			reg = <0x04807000 0xdb8>;
+
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref",
+				      "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0x04a00000 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <8>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0x136 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x04ac0000 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x123 0x0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a80000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c0_default>;
+				pinctrl-1 = <&qup_i2c0_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a80000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-1 = <&qup_spi0_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a84000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c1_default>;
+				pinctrl-1 = <&qup_i2c1_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a88000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c2_default>;
+				pinctrl-1 = <&qup_i2c2_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a88000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi2_default>;
+				pinctrl-1 = <&qup_spi2_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a8c000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c3_default>;
+				pinctrl-1 = <&qup_i2c3_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a90000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c4_default>;
+				pinctrl-1 = <&qup_i2c4_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@4c00000 {
+			compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0x04c00000 0x60000>;
+			interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <8>;
+			dma-channel-mask = <0x0f>;
+			iommus = <&apps_smmu 0x156 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@4cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x04cc0000 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x143 0x0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c5: i2c@4c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c80000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c5_default>;
+				pinctrl-1 = <&qup_i2c5_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04c80000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-1 = <&qup_spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@4c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c84000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c6_default>;
+				pinctrl-1 = <&qup_i2c6_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@4c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04c84000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi6_default>;
+				pinctrl-1 = <&qup_spi6_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@4c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c88000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c7_default>;
+				pinctrl-1 = <&qup_i2c7_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@4c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c8c000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c8_default>;
+				pinctrl-1 = <&qup_i2c8_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@4c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04c8c000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi8_default>;
+				pinctrl-1 = <&qup_spi8_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@4c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c90000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c9_default>;
+				pinctrl-1 = <&qup_i2c9_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@4c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04c90000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi9_default>;
+				pinctrl-1 = <&qup_spi9_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb3: usb@4ef8800 {
+			compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
+			reg = <0x04ef8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <66666667>;
+
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb3_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x04e00000 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x100 0x0>;
+				phys = <&hsusb_phy1>;
+				phy-names = "usb2-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				maximum-speed = "high-speed";
+				dr_mode = "peripheral";
+			};
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x04690000 0x10000>;
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x01c40000 0x1100>,
+			      <0x01e00000 0x2000000>,
+			      <0x03e00000 0x100000>,
+			      <0x03f00000 0xa0000>,
+			      <0x01c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0c600000 0x80000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,sm6125-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
+			reg = <0x0f111000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x0f120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f121000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f121000 0x1000>,
+				      <0x0f122000 0x1000>;
+			};
+
+			frame@f123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0f200000 0x20000>,
+			      <0x0f300000 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 0xf08
+			      GIC_PPI 2 0xf08
+			      GIC_PPI 3 0xf08
+			      GIC_PPI 0 0xf08>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
new file mode 100644
index 0000000000..dddd6e44d2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm6350.dtsi"
+#include "pm6350.dtsi"
+
+/ {
+	model = "Sony Xperia 10 III";
+	compatible = "sony,pdx213", "qcom,sm6350";
+	chassis-type = "handset";
+	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,board-id = <0x1000B 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@a0000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xa0000000 0 0x2300000>;
+			width = <1080>;
+			height = <2520>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_down_n>;
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	touch_en_vreg: touch-en-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_en_vreg";
+		gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&pm6350_l6>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6350-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		pm6350_s1: smps1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_s2: smps2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <2048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l2: ldo2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l3: ldo3 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l4: ldo4 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l5: ldo5 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l6: ldo6 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l7: ldo7 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l8: ldo8 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l9: ldo9 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l11: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l12: ldo12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l13: ldo13 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l14: ldo14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l15: ldo15 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l16: ldo16 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <921000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l18: ldo18 {
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1049000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l19: ldo19 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l20: ldo20 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l21: ldo21 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <825000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l22: ldo22 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		pm6150l_s8: smps8 {
+			regulator-min-microvolt = <313000>;
+			regulator-max-microvolt = <1395000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l1: ldo1 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l2: ldo2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l3: ldo3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1299000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l4: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l5: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l6: ldo6 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l7: ldo7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l9: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l10: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l11: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_bob: bob {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <5492000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+		vdd-supply = <&pm6350_l11>;
+		avdd-supply = <&touch_en_vreg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default &ts_active>;
+	};
+};
+
+&pm6350_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-disable;
+		input-enable;
+	};
+};
+
+&pm6350_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6150l_l9>;
+	vqmmc-supply = <&pm6150l_l6>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <13 4>, <45 2>, <56 2>;
+
+	ts_active: ts-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	maximum-speed = "super-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
new file mode 100644
index 0000000000..6464e144c2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -0,0 +1,2719 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+#include <dt-bindings/clock/qcom,gcc-sm6350.h>
+#include <dt-bindings/clock/qcom,gpucc-sm6350.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm6350-camcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sm6350.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <76800000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <703>;
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <703>;
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_PC: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41001244>;
+				entry-latency-us = <3638>;
+				exit-latency-us = <4562>;
+				min-residency-us = <8467>;
+			};
+
+			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100b244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+
+		cpu_idle_states: idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6350", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			/* DDR: 4-wide, 2 channels, double data rate, L3: 16-wide, 2 channels */
+			opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(547000 * 4 * 2 * 2) (556800 * 16 * 2)>;
+		};
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+		};
+
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1286400 * 16 * 2)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+		};
+
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <(768000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+		};
+
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1401600 * 16 * 2)>;
+		};
+
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_PC
+					      &CLUSTER_SLEEP_CX_RET
+					      &CLUSTER_AOSS_SLEEP>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0 0x80000000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			reg = <0 0x80700000 0 0x160000>;
+			no-map;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x80860000 0 0x20000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@808ff000 {
+			reg = <0 0x808ff000 0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0 0x80900000 0 0x200000>;
+			no-map;
+		};
+
+		cdsp_sec_mem: memory@80b00000 {
+			reg = <0 0x80b00000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_camera_mem: memory@86000000 {
+			reg = <0 0x86000000 0 0x500000>;
+			no-map;
+		};
+
+		pil_npu_mem: memory@86500000 {
+			reg = <0 0x86500000 0 0x500000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@86a00000 {
+			reg = <0 0x86a00000 0 0x500000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@86f00000 {
+			reg = <0 0x86f00000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@88d00000 {
+			reg = <0 0x88d00000 0 0x2800000>;
+			no-map;
+		};
+
+		wlan_fw_mem: memory@8b500000 {
+			reg = <0 0x8b500000 0 0x200000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@8b700000 {
+			reg = <0 0x8b700000 0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@8b710000 {
+			reg = <0 0x8b710000 0 0x5400>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@8b800000 {
+			reg = <0 0x8b800000 0 0xf800000>;
+			no-map;
+		};
+
+		cont_splash_memory: memory@a0000000 {
+			reg = <0 0xa0000000 0 0x2300000>;
+			no-map;
+		};
+
+		dfps_data_memory: memory@a2300000 {
+			reg = <0 0xa2300000 0 0x100000>;
+			no-map;
+		};
+
+		removed_region: memory@c0000000 {
+			reg = <0 0xc0000000 0 0x3900000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@f0d00000 {
+			reg = <0 0xf0d00000 0 0x1000>;
+			no-map;
+		};
+
+		debug_region: memory@ffb00000 {
+			reg = <0 0xffb00000 0 0xc0000>;
+			no-map;
+		};
+
+		last_log_region: memory@ffbc0000 {
+			reg = <0 0xffbc0000 0 0x40000>;
+			no-map;
+		};
+
+		ramoops: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			no-map;
+		};
+
+		cmdline_region: memory@ffd00000 {
+			reg = <0 0xffd00000 0 0x1000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm6350";
+			reg = <0 0x00100000 0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm6350-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qfprom: qfprom@784000 {
+			compatible = "qcom,sm6350-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu-speed-bin@2015 {
+				reg = <0x2015 0x1>;
+				bits = <0 8>;
+			};
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x00793000 0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x007c4000 0 0x1000>,
+				<0 0x007c5000 0 0x1000>,
+				<0 0x007c8000 0 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x60 0x0>;
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd SM6350_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			compatible = "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM6350_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@900000 {
+			compatible = "qcom,sm6350-gpi-dma";
+			reg = <0 0x00900000 0 0x60000>;
+			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 648 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 649 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 650 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x4d6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x4c3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c6: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c7: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c8: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			uart9: serial@98c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm6350-config-noc";
+			reg = <0 0x01500000 0 0x28000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sm6350-system-noc";
+			reg = <0 0x01620000 0 0x17080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			clk_virt: interconnect-clk-virt {
+				compatible = "qcom,sm6350-clk-virt";
+				#interconnect-cells = <2>;
+				qcom,bcm-voters = <&apps_bcm_voter>;
+			};
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm6350-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm6350-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f880>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			compute_noc: interconnect-compute-noc {
+				compatible = "qcom,sm6350-compute-noc";
+				#interconnect-cells = <2>;
+				qcom,bcm-voters = <&apps_bcm_voter>;
+			};
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm6350-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>,
+			      <0 0x01d90000 0 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk",
+				      "ice_core_clk";
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_QLINK_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm6350-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x18c>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x128>,
+				      <0 0x01d87600 0 0x1fc>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x128>,
+				      <0 0x01d87a00 0 0x1fc>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sm6350-ipa";
+
+			iommus = <&apps_smmu 0x440 0x0>,
+				 <&apps_smmu 0x442 0x0>;
+			reg = <0 0x01e40000 0 0x8000>,
+			      <0 0x01e50000 0 0x3000>,
+			      <0 0x01e04000 0 0x23000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &clk_virt SLAVE_EBI_CH0 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_OCIMEM 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory", "imem", "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		adsp: remoteproc@3000000 {
+			compatible = "qcom,sm6350-adsp-pas";
+			reg = <0 0x03000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_LCX>,
+					<&rpmhpd SM6350_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0>;
+						qcom,nsessions = <5>;
+					};
+				};
+			};
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-619.0", "qcom,adreno";
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-850000000 {
+					opp-hz = /bits/ 64 <850000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-supported-hw = <0x04>;
+				};
+
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0x08>;
+				};
+
+				opp-565000000 {
+					opp-hz = /bits/ 64 <565000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0x10>;
+				};
+
+				opp-430000000 {
+					opp-hz = /bits/ 64 <430000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-355000000 {
+					opp-hz = /bits/ 64 <355000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-253000000 {
+					opp-hz = /bits/ 64 <253000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@3d40000 {
+			compatible = "qcom,sm6350-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0 0x03d40000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb",
+				      "bus",
+				      "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-619.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x31000>,
+			      <0 0x0b290000 0 0x10000>,
+			      <0 0x0b490000 0 0x10000>;
+			reg-names = "gmu",
+				    "gmu_pdc",
+				    "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi",
+					  "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			status = "disabled";
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm6350-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,sm6350-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_CX>,
+					<&rpmhpd SM6350_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm6350-cdsp-pas";
+			reg = <0 0x08300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_CX>,
+					<&rpmhpd SM6350_MX>;
+			power-domain-names = "cx", "mx";
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1401 0x20>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1402 0x20>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1403 0x20>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1404 0x20>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1405 0x20>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1406 0x20>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1407 0x20>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1408 0x20>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x560 0x0>;
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd SM6350_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <790000 131000>;
+					opp-avg-kBps = <50000 50000>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3190000 294000>;
+					opp-avg-kBps = <261438 300000>;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&xo_board>, <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm6350-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+		};
+
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sm6350-dc-noc";
+			reg = <0 0x09160000 0 0x3200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sm6350-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc_broadcast_base";
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sm6350-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sm6350-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pmu@90b6300 {
+			compatible = "qcom,sm6350-llcc-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x090b6300 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+			interconnects = <&clk_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2288000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <14236000>;
+				};
+
+			};
+		};
+
+		pmu@90cd000 {
+			compatible = "qcom,sm6350-cpu-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x090cd000 0x0 0x1000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1144000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <1720000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <2597000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <3879000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <5161000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <6881000>;
+				};
+
+				opp-10 {
+					opp-peak-kBps = <7980000>;
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x540 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SOC_AHB_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+					  <&camcc CAMCC_CCI_0_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SOC_AHB_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+					  <&camcc CAMCC_CCI_1_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-0 = <&cci2_default>;
+			pinctrl-1 = <&cci2_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			/* SM6350 seems to have cci1_i2c1 on gpio2 & gpio3 but unused downstream */
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sm6350-camcc";
+			reg = <0 0x0ad00000 0 0x16000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm6350-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+			iommus = <&apps_smmu 0x800 0x2>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm6350-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "rot",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SM6350_CX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-373333333 {
+						opp-hz = /bits/ 64 <373333333>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-448000000 {
+						opp-hz = /bits/ 64 <448000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-560000000 {
+						opp-hz = /bits/ 64 <560000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd SM6350_MX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm6350-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm6350-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 655 12>, <138 139 15>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x1000>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm6350-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 157>;
+			wakeup-parent = <&pdc>;
+
+			cci0_default: cci0-default-state {
+				pins = "gpio39", "gpio40";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio39", "gpio40";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio41", "gpio42";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio41", "gpio42";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio43", "gpio44";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio43", "gpio44";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default-state {
+				pins = "gpio25", "gpio26";
+				function = "qup13_f2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio13", "gpio14";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio19", "gpio20";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart1_cts: qup-uart1-cts-default-state {
+				pins = "gpio61";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart1_rts: qup-uart1-rts-default-state {
+				pins = "gpio62";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart1_rx: qup-uart1-rx-default-state {
+				pins = "gpio64";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart1_tx: qup-uart1-tx-default-state {
+				pins = "gpio63";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm6350-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			label = "apps_rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+					  <WAKE_TCS 3>, <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm6350-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm6350-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sm6350-osm-l3", "qcom,osm-l3";
+			reg = <0x0 0x18321000 0x0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_fw_mem>;
+			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x20 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		clock-frequency = <19200000>;
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
new file mode 100644
index 0000000000..b2f1bb1d58
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+/* PMK8350 is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
+#include <dt-bindings/gpio/gpio.h>
+#include "sm6375.dtsi"
+#include "pm6125.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+
+/* PM6125 PON is used and we can't have duplicate labels */
+/delete-node/ &pmk8350_pon;
+
+/ {
+	model = "Sony Xperia 10 IV";
+	compatible = "sony,pdx225", "qcom,sm6375";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@85200000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x85200000 0 0xc00000>;
+
+			width = <1080>;
+			height = <2520>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet
+			 */
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_THROTTLE_CORE_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&vol_down_n>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@85200000 {
+			reg = <0 0x85200000 0 0xc00000>;
+			no-map;
+		};
+
+		ramoops@ffc40000 {
+			compatible = "ramoops";
+			reg = <0 0xffc40000 0 0xb0000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+
+		vdd-supply = <&pm6125_l13>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmr735a_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		pm6125_s5: s5 {
+			regulator-min-microvolt = <382000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		pm6125_s6: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1374000>;
+		};
+
+		pm6125_s7: s7 {
+			regulator-min-microvolt = <1574000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		/*
+		 * S8 is VDD_GFX
+		 * L1 is VDD_LPI_CX
+		 */
+
+		pm6125_l2: l2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l3: l3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm6125_l4: l4 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm6125_l5: l5 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l6: l6 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l7: l7 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm6125_l8: l8 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l9: l9 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l10: l10 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l11: l11 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l12: l12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l13: l13 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l14: l14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm6125_l15: l15 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		pm6125_l16: l16 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		/* L17 is VDD_LPI_MX */
+
+		pm6125_l18: l18 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <920000>;
+		};
+
+		pm6125_l19: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l20: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l21: l21 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l22: l22 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmr735a-regulators";
+
+		/*
+		 * S1 is VDD_MX
+		 * S2 is VDD_CX
+		 */
+
+		pmr735a_l1: l1 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+		};
+
+		pmr735a_l2: l2 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <796000>;
+		};
+
+		pmr735a_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: l4 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pmr735a_l5: l5 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+		};
+
+		pmr735a_l6: l6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <868000>;
+		};
+
+		pmr735a_l7: l7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <13 4>;
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_avdd_default: ts-avdd-default-state {
+		pins = "gpio59";
+		function = "gpio";
+		drive-strength = <8>;
+		output-high;
+	};
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
new file mode 100644
index 0000000000..e56f7ea4eb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -0,0 +1,2504 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/clock/qcom,sm6375-gcc.h>
+#include <dt-bindings/clock/qcom,sm6375-gpucc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sm6375", "qcom,scm";
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			#reset-cells = <1>;
+		};
+	};
+
+	mpm: interrupt-controller {
+		compatible = "qcom,mpm";
+		qcom,rpm-msg-ram = <&apss_mpm>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#power-domain-cells = <0>;
+		interrupt-parent = <&intc>;
+		qcom,mpm-pin-count = <96>;
+		qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
+				   <12 422>, /* DWC3 ss_phy_irq */
+				   <86 183>, /* MPM wake, SPMI */
+				   <89 314>, /* TSENS0 0C */
+				   <90 315>, /* TSENS1 0C */
+				   <93 164>, /* DWC3 dm_hs_phy_irq */
+				   <94 165>; /* DWC3 dp_hs_phy_irq */
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(556800 * 32)>;
+		};
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(652800 * 32)>;
+		};
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(921600 * 32)>;
+		};
+
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(921600 * 32)>;
+		};
+
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(556800 * 32)>;
+		};
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(921600 * 32)>;
+		};
+
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1382400 * 32)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hypervisor@80000000 {
+			reg = <0 0x80000000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0 0x80700000 0 0x100000>;
+			no-map;
+		};
+
+		reserved_xbl_uefi: xbl-uefi-res@80880000 {
+			reg = <0 0x80880000 0 0x14000>;
+			no-map;
+		};
+
+		smem_mem: smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0 0x80900000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		fw_mem: fw@80b00000 {
+			reg = <0 0x80b00000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 {
+			reg = <0 0x80c00000 0 0x1e00000>;
+			no-map;
+		};
+
+		dfps_data_mem: dpfs-data@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		pil_wlan_mem: pil-wlan@86500000 {
+			reg = <0 0x86500000 0 0x200000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@86700000 {
+			reg = <0 0x86700000 0 0x2000000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: pil-cdsp@88700000 {
+			reg = <0 0x88700000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@8a500000 {
+			reg = <0 0x8a500000 0 0x500000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: pil-ipa-fw@8aa00000 {
+			reg = <0 0x8aa00000 0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 {
+			reg = <0 0x8aa10000 0 0xa000>;
+			no-map;
+		};
+
+		pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 {
+			reg = <0 0x8aa1a000 0 0x2000>;
+			no-map;
+		};
+
+		pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 {
+			reg = <0 0x8b800000 0 0x10000000>;
+			no-map;
+		};
+
+		removed_mem: removed@c0000000 {
+			reg = <0 0xc0000000 0 0x5100000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@f3900000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf3900000 0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+		};
+
+		debug_mem: debug@ffb00000 {
+			reg = <0 0xffb00000 0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0 0xffbc0000 0 0x80000>;
+			no-map;
+		};
+
+		cmdline_region: cmdline@ffd00000 {
+			reg = <0 0xffd00000 0 0x1000>;
+			no-map;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,sm6375-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+						     IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-sm6375";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
+					clocks = <&xo_board_clk>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,sm6375-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_min_svs: opp2 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp6 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp8 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		ipcc: mailbox@208000 {
+			compatible = "qcom,sm6375-ipcc", "qcom,ipcc";
+			reg = <0 0x00208000 0 0x1000>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6375-tlmm";
+			reg = <0 0x00500000 0 0x800000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 157>;
+			wakeup-parent = <&mpm>;
+			interrupt-controller;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			#gpio-cells = <2>;
+
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio61", "gpio62";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio19", "gpio20";
+				/* TLMM, GCC and vendor DT all have different indices.. */
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup00";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,sm6375-gcc";
+			reg = <0 0x01400000 0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&sleep_clk>;
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@162b000 {
+			compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x0162b000 0 0x400>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x01c40000 0 0x1100>,
+			      <0 0x01e00000 0 0x2000000>,
+			      <0 0x03e00000 0 0x100000>,
+			      <0 0x03f00000 0 0xa0000>,
+			      <0 0x01c0a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+			reg = <0 0x04411000 0 0x140>, /* TM */
+			      <0 0x04410000 0 0x20>;  /* SROT */
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <15>;
+		};
+
+		tsens1: thermal-sensor@4413000 {
+			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+			reg = <0 0x04413000 0 0x140>, /* TM */
+			      <0 0x04412000 0 0x20>;  /* SROT */
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <11>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
+			reg = <0 0x045f0000 0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0 0x04690000 0 0x400>;
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x04784000 0 0x1000>;
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			iommus = <&apps_smmu 0x40 0x0>;
+
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmpd SM6375_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04a00000 0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0x16 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/*
+			 * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream.
+			 * There is a comment in the included DTSI of another SoC saying that they
+			 * are not "bolled out" (probably meaning not routed to solder balls)
+			 * TLMM driver however, suggests there are as many as 15 QUPs in total!
+			 * Most of which don't even have pin configurations for.. Sad stuff!
+			 */
+		};
+
+		gpi_dma1: dma-controller@4c00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04c00000 0 0x60000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0xd6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@4cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04cc0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xc3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c6: i2c@4c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@4c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@4c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@4c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@4c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@4c88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@4c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@4c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@4c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@4c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb_1: usb@4ef8800 {
+			compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
+			reg = <0 0x04ef8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
+					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			/*
+			 * This property is there to allow USB2 to work, as
+			 * USB3 is not implemented yet - (re)move it when
+			 * proper support is in place.
+			 */
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x04e00000 0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				maximum-speed = "high-speed";
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0xe0 0x0>;
+
+				/* Yes, this impl *does* have an unfunny number of quirks.. */
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,is-utmi-l1-suspend;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,usb3_lpm_capable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+			};
+		};
+
+		adreno_smmu: iommu@5940000 {
+			compatible = "qcom,sm6375-smmu-v2", "qcom,smmu-v2";
+			reg = <0 0x05940000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "bus";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		gpucc: clock-controller@5990000 {
+			compatible = "qcom,sm6375-gpucc";
+			reg = <0 0x05990000 0 0x9000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			power-domains = <&rpmpd SM6375_VDDGX>;
+			required-opps = <&rpmpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		remoteproc_mss: remoteproc@6000000 {
+			compatible = "qcom,sm6375-mpss-pas";
+			reg = <0 0x06000000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDDCX>;
+			power-domain-names = "cx";
+
+			memory-region = <&pil_mpss_wlan_mem>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@a400000 {
+			compatible = "qcom,sm6375-adsp-pas";
+			reg = <0 0x0a400000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDD_LPI_CX>,
+					<&rpmpd SM6375_VDD_LPI_MX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@b000000 {
+			compatible = "qcom,sm6375-cdsp-pas";
+			reg = <0x0 0x0b000000 0x0 0x100000>;
+
+			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDDCX>;
+			power-domain-names = "cx";
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
+
+		sram@c125000 {
+			compatible = "qcom,sm6375-imem", "syscon", "simple-mfd";
+			reg = <0 0x0c125000 0 0x1000>;
+			ranges = <0 0 0x0c125000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
+			reg = <0 0x0c600000 0 0x100000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>,
+					<&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>,
+					<&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x0c800000 0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&pil_wlan_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x80 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,  /* GICD */
+			      <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */
+			interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			#interrupt-cells = <3>;
+			redistributor-stride = <0 0x20000>;
+			interrupt-controller;
+		};
+
+		timer@f420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x0f420000 0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@f421000 {
+				reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@f423000 {
+				reg = <0x0f243000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@f425000 {
+				reg = <0x0f425000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@f427000 {
+				reg = <0x0f427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@f429000 {
+				reg = <0x0f429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@f42b000 {
+				reg = <0x0f42b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@f42d000 {
+				reg = <0x0f42d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		cpucp_l3: interconnect@fd90000 {
+			compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3";
+			reg = <0 0x0fd90000 0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@fd91000 {
+			compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		mapss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				mapss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss0_crit: mapss-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-unk0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu_unk0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-unk1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu_unk1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_crit: gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_crit: gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mapss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				mapss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss1_crit: mapss-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cwlan-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cwlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cwlan_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cwlan_crit: cwlan-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				audio_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				audio_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				audio_crit: audio-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				ddr_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr_crit: ddr-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6hvx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				q6hvx_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				q6hvx_crit: q6hvx-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_crit: camera-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				mdm_core0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core0_crit: mdm-core0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mdm_core1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core1_crit: mdm-core1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-vec-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				mdm_vec_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_vec_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_vec_crit: mdm-vec-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		msm-scl-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				msm_scl_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				msm_scl_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				msm_scl_crit: msm-scl-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
new file mode 100644
index 0000000000..18171c5d8a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -0,0 +1,723 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7225.dtsi"
+#include "pm6150l.dtsi"
+#include "pm6350.dtsi"
+#include "pm7250b.dtsi"
+#include "pmk8350.dtsi"
+
+/ {
+	model = "Fairphone 4";
+	compatible = "fairphone,fp4", "qcom,sm7225";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,board-id = <8 32>;
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		framebuffer0: framebuffer@a000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xa0000000 0 (2340 * 1080 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin>;
+
+		key-volume-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		/*
+		 * The rmtfs memory region in downstream is 'dynamically allocated'
+		 * but given the same address every time. Hard code it as this address is
+		 * where the modem firmware expects it to be.
+		 */
+		memory@efe01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xefe01000 0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	thermal-zones {
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6350-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a: smps1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s2a: smps2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		vreg_l2a: ldo2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a: ldo3 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a: ldo12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a: ldo14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a: ldo15 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a: ldo16 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <921000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a: ldo18 {
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1049000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a: ldo19 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a: ldo20 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a: ldo21 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <825000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a: ldo22 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s8e: smps8 {
+			regulator-min-microvolt = <313000>;
+			regulator-max-microvolt = <1395000>;
+		};
+
+		vreg_l1e: ldo1 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e: ldo2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e: ldo3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1299000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4e: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5e: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7e: ldo7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9e: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10e: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11e: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <5492000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&cci0 {
+	status = "okay";
+};
+
+&cci0_i2c0 {
+	/* IMX582 @ 0x1a */
+};
+
+&cci0_i2c1 {
+	/* IMX582 @ 0x1a */
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	/* IMX576 @ 0x10 */
+};
+
+&cdsp {
+	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* ST21NFCD NFC @ 8 */
+	/* VL53L3 ToF @ 29 */
+	/* AW88264A amplifier @ 34 */
+	/* AW88264A amplifier @ 35 */
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* HX83112A touchscreen @ 48 */
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PM8008 PMIC @ 8 and 9 */
+	/* PX8618 @ 26 */
+	/* SMB1395 PMIC @ 34 */
+
+	haptics@5a {
+		compatible = "awinic,aw8695";
+		reg = <0x5a>;
+		interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+
+		awinic,f0-preset = <2350>;
+		awinic,f0-coefficient = <260>;
+		awinic,f0-calibration-percent = <7>;
+		awinic,drive-level = <125>;
+
+		awinic,f0-detection-play-time = <5>;
+		awinic,f0-detection-wait-time = <3>;
+		awinic,f0-detection-repeat = <2>;
+		awinic,f0-detection-trace = <15>;
+
+		awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>;
+		awinic,tset = /bits/ 8 <0x12>;
+		awinic,r-spare = /bits/ 8 <0x68>;
+
+		awinic,bemf-upper-threshold = <4104>;
+		awinic,bemf-lower-threshold = <1016>;
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mdt";
+	status = "okay";
+};
+
+&mpss {
+	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+	status = "okay";
+};
+
+&pm6150l_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>;
+		led-max-microamp = <180000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>;
+		led-max-microamp = <180000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
+&pm6150l_wled {
+	qcom,switching-freq = <800>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,num-strings = <2>;
+
+	status = "okay";
+};
+
+&pm6350_gpios {
+	gpio_keys_pin: gpio-keys-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		power-source = <0>;
+	};
+};
+
+&pm6350_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	channel@644 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "xo_therm";
+	};
+};
+
+&qup_uart1_cts {
+	/*
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
+	 */
+	bias-bus-hold;
+};
+
+&qup_uart1_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart1_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&qup_uart1_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9e>;
+	vqmmc-supply = <&vreg_l6e>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <13 4>, <56 2>;
+
+	qup_uart1_sleep_cts: qup-uart1-sleep-cts-state {
+		pins = "gpio61";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart1_sleep_rts: qup-uart1-sleep-rts-state {
+		pins = "gpio62";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart1_sleep_rx: qup-uart1-sleep-rx-state {
+		pins = "gpio64";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart1_sleep_tx: qup-uart1-sleep-tx-state {
+		pins = "gpio63";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+};
+
+&uart1 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 64 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart1_sleep_cts>, <&qup_uart1_sleep_rts>, <&qup_uart1_sleep_tx>, <&qup_uart1_sleep_rx>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3988-bt";
+
+		vddio-supply = <&vreg_l11a>;
+		vddxo-supply = <&vreg_l7a>;
+		vddrf-supply = <&vreg_l2e>;
+		vddch0-supply = <&vreg_l10e>;
+		swctrl-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7e>;
+	vcc-max-microamp = <800000>;
+	vccq2-supply = <&vreg_l12a>;
+	vccq2-max-microamp = <800000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l18a>;
+	vdda-pll-supply = <&vreg_l22a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	maximum-speed = "super-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l18a>;
+	vdda-pll-supply = <&vreg_l2a>;
+	vdda-phy-dpdm-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l22a>;
+	vdda-pll-supply = <&vreg_l16a>;
+
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l4a>;
+	vdd-1.8-xo-supply = <&vreg_l7a>;
+	vdd-1.3-rfa-supply = <&vreg_l2e>;
+	vdd-3.3-ch0-supply = <&vreg_l10e>;
+	vdd-3.3-ch1-supply = <&vreg_l11e>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi
new file mode 100644
index 0000000000..b7b4044e9b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+#include "sm6350.dtsi"
+
+/* SM7225 uses Kryo 570 instead of Kryo 560 */
+&CPU0 { compatible = "qcom,kryo570"; };
+&CPU1 { compatible = "qcom,kryo570"; };
+&CPU2 { compatible = "qcom,kryo570"; };
+&CPU3 { compatible = "qcom,kryo570"; };
+&CPU4 { compatible = "qcom,kryo570"; };
+&CPU5 { compatible = "qcom,kryo570"; };
+&CPU6 { compatible = "qcom,kryo570"; };
+&CPU7 { compatible = "qcom,kryo570"; };
+
+&cpu0_opp_table {
+	opp-1804800000 {
+		opp-hz = /bits/ 64 <1804800000>;
+		opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+	};
+};
+
+&cpu6_opp_table {
+	opp-2131200000 {
+		opp-hz = /bits/ 64 <2131200000>;
+		opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+	};
+
+	opp-2208000000 {
+		opp-hz = /bits/ 64 <2208000000>;
+		opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
new file mode 100644
index 0000000000..f4c6e1309a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8150 HDK";
+	compatible = "qcom,sm8150-hdk", "qcom,sm8150";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vdda_wcss_pll:
+		vreg_l1a_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_pdphy:
+		vdda_usb_hs_3p1:
+		vreg_l2a_3p1: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_usb_hs_core:
+		vdda_csi_0_0p9:
+		vdda_csi_1_0p9:
+		vdda_csi_2_0p9:
+		vdda_csi_3_0p9:
+		vdda_dsi_0_0p9:
+		vdda_dsi_1_0p9:
+		vdda_dsi_0_pll_0p9:
+		vdda_dsi_1_pll_0p9:
+		vdda_pcie_1ln_core:
+		vdda_pcie_2ln_core:
+		vdda_pll_hv_cc_ebi01:
+		vdda_pll_hv_cc_ebi23:
+		vdda_qrefs_0p875_5:
+		vdda_sp_sensor:
+		vdda_ufs_2ln_core_1:
+		vdda_ufs_2ln_core_2:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vreg_l5a_0p875: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l9a_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p5: ldo10 {
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_usb_hs_1p8:
+		vdda_qrefs_vref_1p8:
+		vddpx_10_a:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p7: ldo13 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+		vdd-flash-supply = <&vreg_bob>;
+		vdd-rgb-supply = <&vreg_bob>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_wcss_adcdac_1:
+		vdda_wcss_adcdac_22:
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_hv_refgen0:
+		vdda_qlink_hv_ck:
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_2p85: ldo5 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p85: ldo6 {
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <2856000>;
+		};
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	/*
+	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
+	 * after display support is added on this board.
+	 */
+	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+
+	firmware-name = "qcom/sm8150/adsp.mbn";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+
+	firmware-name = "qcom/sm8150/cdsp.mbn";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+
+	firmware-name = "qcom/sm8150/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <126 4>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p5>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l9a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_2_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5a_0p875>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
new file mode 100644
index 0000000000..b039773c44
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2021, Microsoft Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Microsoft Surface Duo";
+	compatible = "microsoft,surface-duo", "qcom,sm8150";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8150 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vdda_wcss_pll:
+		vreg_l1a_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_pdphy:
+		vdda_usb_hs_3p1:
+		vreg_l2a_3p1: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_usb_hs_core:
+		vdda_csi_0_0p9:
+		vdda_csi_1_0p9:
+		vdda_csi_2_0p9:
+		vdda_csi_3_0p9:
+		vdda_dsi_0_0p9:
+		vdda_dsi_1_0p9:
+		vdda_dsi_0_pll_0p9:
+		vdda_dsi_1_pll_0p9:
+		vdda_pcie_1ln_core:
+		vdda_pcie_2ln_core:
+		vdda_pll_hv_cc_ebi01:
+		vdda_pll_hv_cc_ebi23:
+		vdda_qrefs_0p875_5:
+		vdda_sp_sensor:
+		vdda_ufs_2ln_core_1:
+		vdda_ufs_2ln_core_2:
+		vdda_usb_ss_dp_core_1:
+		vdda_usb_ss_dp_core_2:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vreg_l5a_0p875: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l9a_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p5: ldo10 {
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_usb_hs_1p8:
+		vdda_qrefs_vref_1p8:
+		vddpx_10_a:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p7: ldo13 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+		vdd-flash-supply = <&vreg_bob>;
+		vdd-rgb-supply = <&vreg_bob>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_wcss_adcdac_1:
+		vdda_wcss_adcdac_22:
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_hv_refgen0:
+		vdda_qlink_hv_ck:
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_2p85: ldo5 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p85: ldo6 {
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <2856000>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bq27742@55 {
+		compatible = "ti,bq27742";
+		reg = <0x55>;
+	};
+
+	da7280@4a {
+		compatible = "dlg,da7280";
+		reg = <0x4a>;
+		interrupts-extended = <&tlmm 42 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "da7280_default";
+		pinctrl-0 = <&da7280_intr_default>;
+
+		dlg,actuator-type = "LRA";
+		dlg,dlg,const-op-mode = <1>;
+		dlg,dlg,periodic-op-mode = <1>;
+		dlg,nom-microvolt = <2000000>;
+		dlg,abs-max-microvolt = <2000000>;
+		dlg,imax-microamp = <129000>;
+		dlg,resonant-freq-hz = <180>;
+		dlg,impd-micro-ohms = <14300000>;
+		dlg,freq-track-enable;
+		dlg,bemf-sens-enable;
+		dlg,mem-array = <
+		  0x06 0x08 0x10 0x11 0x12 0x13 0x14 0x15 0x1c 0x2a
+		  0x33 0x3c 0x42 0x4b 0x4c 0x4e 0x17 0x19 0x27 0x29
+		  0x17 0x19 0x03 0x84 0x5e 0x04 0x08 0x84 0x5d 0x01
+		  0x84 0x5e 0x02 0x00 0xa4 0x5d 0x03 0x84 0x5e 0x06
+		  0x08 0x84 0x5d 0x05 0x84 0x5d 0x06 0x84 0x5e 0x08
+		  0x84 0x5e 0x05 0x8c 0x5e 0x24 0x84 0x5f 0x10 0x84
+		  0x5e 0x05 0x84 0x5e 0x08 0x84 0x5f 0x01 0x8c 0x5e
+		  0x04 0x84 0x5e 0x08 0x84 0x5f 0x11 0x19 0x88 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		>;
+	};
+
+	/* SMB1381 @ 0x44 */
+	/* MAX34417 @ 0x1c */
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* SMB1355 @ 0x0c */
+	/* SMB1390 @ 0x10 */
+};
+
+&i2c17 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bq27742@55 {
+		compatible = "ti,bq27742";
+		reg = <0x55>;
+	};
+};
+
+&i2c19 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* MAX34417 @ 0x12 */
+	/* MAX34417 @ 0x1a */
+	/* MAX34417 @ 0x1e */
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8150/microsoft/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8150/microsoft/cdsp.mdt";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8150/microsoft/modem.mdt";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8150/microsoft/slpi.mdt";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <126 4>;
+
+	da7280_intr_default: da7280-intr-default-state {
+		pins = "gpio42";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p5>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l9a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
new file mode 100644
index 0000000000..286350ac77
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8150 MTP";
+	compatible = "qcom,sm8150-mtp", "qcom,sm8150";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8150 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vdda_wcss_pll:
+		vreg_l1a_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_pdphy:
+		vdda_usb_hs_3p1:
+		vreg_l2a_3p1: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_usb_hs_core:
+		vdda_csi_0_0p9:
+		vdda_csi_1_0p9:
+		vdda_csi_2_0p9:
+		vdda_csi_3_0p9:
+		vdda_dsi_0_0p9:
+		vdda_dsi_1_0p9:
+		vdda_dsi_0_pll_0p9:
+		vdda_dsi_1_pll_0p9:
+		vdda_pcie_1ln_core:
+		vdda_pcie_2ln_core:
+		vdda_pll_hv_cc_ebi01:
+		vdda_pll_hv_cc_ebi23:
+		vdda_qrefs_0p875_5:
+		vdda_sp_sensor:
+		vdda_ufs_2ln_core_1:
+		vdda_ufs_2ln_core_2:
+		vdda_usb_ss_dp_core_1:
+		vdda_usb_ss_dp_core_2:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vreg_l5a_0p875: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l9a_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p5: ldo10 {
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_usb_hs_1p8:
+		vdda_qrefs_vref_1p8:
+		vddpx_10_a:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p7: ldo13 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+		vdd-flash-supply = <&vreg_bob>;
+		vdd-rgb-supply = <&vreg_bob>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_wcss_adcdac_1:
+		vdda_wcss_adcdac_22:
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_hv_refgen0:
+		vdda_qlink_hv_ck:
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_2p85: ldo5 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p85: ldo6 {
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <2856000>;
+		};
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	/*
+	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
+	 * after display support is added on this board.
+	 */
+	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8150/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8150/cdsp.mdt";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8150/modem.mdt";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8150/slpi.mdt";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <126 4>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p5>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l9a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts
new file mode 100644
index 0000000000..b278040325
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8150-sony-xperia-kumano.dtsi"
+
+/ {
+	model = "Sony Xperia 5";
+	compatible = "sony,bahamut-generic", "qcom,sm8150";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <1080>;
+	height = <2520>;
+	stride = <(1080 * 4)>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts
new file mode 100644
index 0000000000..0d6deceedf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8150-sony-xperia-kumano.dtsi"
+
+/ {
+	model = "Sony Xperia 1";
+	compatible = "sony,griffin-generic", "qcom,sm8150";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
new file mode 100644
index 0000000000..ae0ca48b89
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -0,0 +1,869 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &venus_mem;
+
+/ {
+	qcom,msm-id = <339 0x20000>; /* SM8150 v2 */
+	qcom,board-id = <8 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9c000000 0 0x2300000>;
+			/* Griffin BL initializes in 2.5k mode, not 4k */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet (& no dispcc either)..
+			 */
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	cam0_vdig_vreg: cam0-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera0_vdig_vreg";
+		gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&main_cam_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam1_vdig_vreg: cam1-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera1_vdig_vreg";
+		gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&sub_cam_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam2_vdig_vreg: cam2-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera2_vdig_vreg";
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&chat_cam_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam3_vdig_vreg: cam3-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera3_vdig_vreg";
+		gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&supwc_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam_vmdr_vreg: cam-vmdr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vmdr_vreg";
+		gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&main_cam_pwr_vmdr_en>;
+		pinctrl-names = "default";
+	};
+
+	rgbcir_vreg: rgbcir-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "rgbcir_vreg";
+		gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rgbc_ir_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8150 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		mpss_mem: memory@8dc00000 {
+			reg = <0x0 0x8dc00000 0x0 0x9600000>;
+			no-map;
+		};
+
+		venus_mem: memory@97200000 {
+			reg = <0x0 0x97200000 0x0 0x500000>;
+			no-map;
+		};
+
+		slpi_mem: memory@97700000 {
+			reg = <0x0 0x97700000 0x0 0x1400000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@98b00000 {
+			reg = <0x0 0x98b00000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@98b10000 {
+			reg = <0x0 0x98b10000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@98b15000 {
+			reg = <0x0 0x98b15000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_mem: memory@98c00000 {
+			reg = <0x0 0x98c00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@98d00000 {
+			reg = <0x0 0x98d00000 0x0 0x1400000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2400000>;
+			no-map;
+		};
+
+		cdsp_sec_mem: memory@a4c00000 {
+			reg = <0x0 0xa4c00000 0x0 0x3c00000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp_mem {
+	reg = <0x0 0x8be00000 0x0 0x1e00000>;
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s2a_0p6: smps2 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1a_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p875: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p5: ldo10 {
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+		vdd-flash-supply = <&vreg_bob>;
+		vdd-rgb-supply = <&vreg_bob>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+
+		vreg_s1c_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PM8009 is not present on these boards, even if downstream sources suggest so. */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Qcom SMB1355 @ c */
+	/* Qcom SMB1390 @ 10 */
+	/* Qcom FSA4480 USB-C audio switch @ 43 */
+
+	nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <47 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c10 {
+	status = "okay";
+
+	/* Samsung touchscreen @ 48 */
+};
+
+&pm8150_gpios {
+	gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+			  "",
+			  "NC",
+			  "NC",
+			  "",
+			  "NC",
+			  "SUPWC_PWR_EN",
+			  "",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	supwc_pwr_en: supwc-pwr-en-state {
+		pins = "gpio7";
+		function = "normal";
+		qcom,drive-strength = <1>;
+		power-source = <1>;
+		drive-push-pull;
+		output-low;
+	};
+};
+
+&pm8150b_gpios {
+	gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+			  "FOCUS_N",
+			  "NC",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "TS_VDDH_EN",
+			  "LCD_ID",
+			  "",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "RF_ID";
+
+	snapshot_n: snapshot-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio2";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8150l_gpios {
+	gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */
+			  "NC",
+			  "MAIN_CAM_PWR_VMDR_EN",
+			  "NC",
+			  "",
+			  "NC",
+			  "NC",
+			  "FP_LDO_EN",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "NC";
+
+	main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state {
+		pins = "gpio3";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <0>;
+		drive-push-pull;
+		output-low;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+	cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <126 4>;
+	gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK",
+			  "NFC_ESE_SPI_CS_N",
+			  "NC",
+			  "NC",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "MDP_VSYNC_P",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL", /* GPIO_10 */
+			  "CAM_SOF",
+			  "CAM2_RST_N",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "NC",
+			  "MAIN_CAM_PWR_EN",
+			  "CAM3_RST_N",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "NC",
+			  "NC",
+			  "CAM0_RST_N",
+			  "RGBC_IR_PWR_EN",
+			  "CAM1_RST_N", /* GPIO_30 */
+			  "CCI_I2C_SDA2",
+			  "CCI_I2C_SCL2",
+			  "CCI_I2C_SDA3",
+			  "CCI_I2C_SCL3",
+			  "NC",
+			  "DEBUG_GPIO1",
+			  "RGBC_IR_INT",
+			  "USB_CC_DIR",
+			  "NC",
+			  "NC", /* GPIO_40 */
+			  "NFC_EN",
+			  "NFC_ESE_PWR_REQ",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_RXD",
+			  "NFC_IRQ",
+			  "NFC_DWL_REQ",
+			  "UIM2_DETECT_EN",
+			  "WLAN_SW_CTRL", /* GPIO_50 */
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "NC",
+			  "TS_RESET_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "NC", /* GPIO_60 */
+			  "QLINK_REQUEST",
+			  "QLINK_ENABLE",
+			  "WMSS_RESET_N",
+			  "SDM_GRFC_8",
+			  "WDOG_DISABLE",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD", /* GPIO_70 */
+			  "SDM_RFFE0_DATA",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE1_DATA",
+			  "SDM_RFFE1_CLK",
+			  "SDM_RFFE2_DATA",
+			  "SDM_RFFE2_CLK",
+			  "SDM_RFFE3_DATA",
+			  "SDM_RFFE3_CLK",
+			  "SUB_CAM_PWR_EN",
+			  "FP_RESET_N", /* GPIO_80 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "DVDT_WRT_DET_AND",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "UDON_SWITCH_SEL",
+			  "SD_CARD_DET_N",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "USB_AUDIO_EN1", /* GPIO_100 */
+			  "DISP_ERR_FG",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_DET",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RESET",
+			  "UIM1_PRESENT",
+			  "NFC_CLK_REQ",
+			  "SW_SERVICE",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "ALS_PROX_INT_N",
+			  "FP_INT",
+			  "DVDT_WRT_DET_OR",
+			  "BAROMETER_INT", /* GPIO_120 */
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "CODEC_INT1_N",
+			  "CODEC_INT2_N",
+			  "TX_GTR_THRES_IN",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "NC", /* GPIO_130 */
+			  "DVDT_ENABLE",
+			  "ACCEL_INT",
+			  "NC",
+			  "MAG_INT_N",
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "HW_ID_1",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "NC",
+			  "CODEC_RST_N",
+			  "CDC_SPI_MISO",
+			  "CDC_SPI_MOSI",
+			  "CDC_SPI_SCLK",
+			  "CDC_SPI_CS_N",
+			  "NC",
+			  "LPASS_SLIMBUS_CLK",
+			  "LPASS_SLIMBUS_DATA0", /* GPIO_150 */
+			  "LPASS_SLIMBUS_DATA1",
+			  "USB_AUDIO_EN2",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "COMPASS_I2C_SDA",
+			  "COMPASS_I2C_SCL",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N", /* GPIO_160 */
+			  "SSC_SENSOR_I2C_SDA",
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SSC_UART_1_TX",
+			  "SSC_UART_1_RX",
+			  "WL_CMD_CLK_CHAIN0",
+			  "WL_CMD_DATA_CHAIN0", /* GPIO_170 */
+			  "WL_CMD_CLK_CHAIN1",
+			  "WL_CMD_DATA_CHAIN1",
+			  "WL_BT_COEX_CLK",
+			  "WL_BT_COEX_DATA";
+
+	main_cam_pwr_en: main-cam-pwr-en-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	chat_cam_pwr_en: chat-cam-pwr-en-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	rgbc_ir_pwr_en: rgbc-ir-pwr-en-state {
+		pins = "gpio29";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	sub_cam_pwr_en: sub-cam-pwr-en-state {
+		pins = "gpio79";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l5a_0p875>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
new file mode 100644
index 0000000000..f7e35e2200
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -0,0 +1,5206 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+#include <dt-bindings/clock/qcom,gcc-sm8150.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sm8150.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <232>;
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <232>;
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <232>;
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <232>;
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <369>;
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <369>;
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <369>;
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <421>;
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu7_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <355>;
+				exit-latency-us = <909>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <241>;
+				exit-latency-us = <1461>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp3: opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <800000 12902400>;
+		};
+
+		cpu0_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <800000 12902400>;
+		};
+
+		cpu0_opp5: opp-672000000 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-peak-kBps = <800000 15974400>;
+		};
+
+		cpu0_opp6: opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu0_opp7: opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu0_opp8: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <1804000 22732800>;
+		};
+
+		cpu0_opp9: opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <1804000 22732800>;
+		};
+
+		cpu0_opp10: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <2188000 25804800>;
+		};
+
+		cpu0_opp11: opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <2188000 31948800>;
+		};
+
+		cpu0_opp12: opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu0_opp13: opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu0_opp14: opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu0_opp15: opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <3072000 40550400>;
+		};
+
+		cpu0_opp16: opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <3072000 40550400>;
+		};
+
+		cpu0_opp17: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <3072000 43008000>;
+		};
+
+		cpu0_opp18: opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <3072000 43008000>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp1: opp-710400000 {
+			opp-hz = /bits/ 64 <710400000>;
+			opp-peak-kBps = <1804000 15974400>;
+		};
+
+		cpu4_opp2: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 19660800>;
+		};
+
+		cpu4_opp3: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 22732800>;
+		};
+
+		cpu4_opp4: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 25804800>;
+		};
+
+		cpu4_opp5: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu4_opp6: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		cpu4_opp7: opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		cpu4_opp8: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		cpu4_opp9: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		cpu4_opp10: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 43008000>;
+		};
+
+		cpu4_opp11: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <6220000 43008000>;
+		};
+
+		cpu4_opp12: opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <6220000 49152000>;
+		};
+
+		cpu4_opp13: opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <7216000 49152000>;
+		};
+
+		cpu4_opp14: opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <8368000 49152000>;
+		};
+
+		cpu4_opp15: opp-2227200000 {
+			opp-hz = /bits/ 64 <2227200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu4_opp16: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu4_opp17: opp-2419200000 {
+			opp-hz = /bits/ 64 <2419200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	cpu7_opp_table: opp-table-cpu7 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu7_opp1: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 19660800>;
+		};
+
+		cpu7_opp2: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 22732800>;
+		};
+
+		cpu7_opp3: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 25804800>;
+		};
+
+		cpu7_opp4: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu7_opp5: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		cpu7_opp6: opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		cpu7_opp7: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		cpu7_opp8: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		cpu7_opp9: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 43008000>;
+		};
+
+		cpu7_opp10: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <6220000 43008000>;
+		};
+
+		cpu7_opp11: opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <6220000 49152000>;
+		};
+
+		cpu7_opp12: opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <7216000 49152000>;
+		};
+
+		cpu7_opp13: opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <8368000 49152000>;
+		};
+
+		cpu7_opp14: opp-2227200000 {
+			opp-hz = /bits/ 64 <2227200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp15: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp16: opp-2419200000 {
+			opp-hz = /bits/ 64 <2419200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp17: opp-2534400000 {
+			opp-hz = /bits/ 64 <2534400000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp18: opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp19: opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp20: opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8150", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85d00000 {
+			reg = <0x0 0x85d00000 0x0 0x140000>;
+			no-map;
+		};
+
+		aop_mem: memory@85f00000 {
+			reg = <0x0 0x85f00000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db: memory@85f20000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x85f20000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x3900000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@89b00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x89b00000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		camera_mem: memory@8b700000 {
+			reg = <0x0 0x8b700000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x180000>;
+			no-map;
+		};
+
+		npu_mem: memory@8bd80000 {
+			reg = <0x0 0x8bd80000 0x0 0x80000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8be00000 {
+			reg = <0x0 0x8be00000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8d800000 {
+			reg = <0x0 0x8d800000 0x0 0x9600000>;
+			no-map;
+		};
+
+		venus_mem: memory@96e00000 {
+			reg = <0x0 0x96e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		slpi_mem: memory@97300000 {
+			reg = <0x0 0x97300000 0x0 0x1400000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@98700000 {
+			reg = <0x0 0x98700000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@98710000 {
+			reg = <0x0 0x98710000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@98715000 {
+			reg = <0x0 0x98715000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_mem: memory@98800000 {
+			reg = <0x0 0x98800000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@98900000 {
+			reg = <0x0 0x98900000 0x0 0x1400000>;
+			no-map;
+		};
+
+		qseecom_mem: memory@9e400000 {
+			reg = <0x0 0x9e400000 0x0 0x1400000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8150";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>;
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x00d6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		ethernet: ethernet@20000 {
+			compatible = "qcom,sm8150-ethqos";
+			reg = <0x0 0x00020000 0x0 0x10000>,
+			      <0x0 0x00036000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+			clocks = <&gcc GCC_EMAC_AXI_CLK>,
+				<&gcc GCC_EMAC_SLV_AHB_CLK>,
+				<&gcc GCC_EMAC_PTP_CLK>,
+				<&gcc GCC_EMAC_RGMII_CLK>;
+			interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			power-domains = <&gcc EMAC_GDSC>;
+			resets = <&gcc GCC_EMAC_BCR>;
+
+			iommus = <&apps_smmu 0x3c0 0x0>;
+
+			snps,tso;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,sm8150-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@133 {
+				reg = <0x133 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xc3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x0616 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x603 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart9_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00094000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi16_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma2: dma-controller@c00000 {
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00c00000 0 0x60000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x07b6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_2: geniqup@cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00cc0000 0x0 0x6000>;
+
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x7a3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c17: i2c@c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c80000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi17_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c18_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c84000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi18_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@c88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c88000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi19_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c8c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c90000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@c94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@c94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c94000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8150-config-noc";
+			reg = <0 0x01500000 0 0x7400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sm8150-system-noc";
+			reg = <0 0x01620000 0 0x19400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@163a000 {
+			compatible = "qcom,sm8150-mc-virt";
+			reg = <0 0x0163a000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8150-aggre1-noc";
+			reg = <0 0x016e0000 0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8150-aggre2-noc";
+			reg = <0 0x01700000 0 0x20000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@1720000 {
+			compatible = "qcom,sm8150-compute-noc";
+			reg = <0 0x01720000 0 0x7000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8150-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sm8150-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma@10a2000 {
+			compatible = "qcom,sm8150-dcc", "qcom,dcc";
+			reg = <0x0 0x010a2000 0x0 0x1000>,
+			      <0x0 0x010ad000 0x0 0x3000>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sm8150";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu";
+
+			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
+				    <0x100 &apps_smmu 0x1d81 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_default_state>;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: phy@1c06200 {
+				reg = <0 0x01c06200 0 0x170>, /* tx */
+				      <0 0x01c06400 0 0x200>, /* rx */
+				      <0 0x01c06800 0 0x1f0>, /* pcs */
+				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sm8150";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
+				    <0x100 &apps_smmu 0x1e01 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_default_state>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c0e200 {
+				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
+				      <0 0x01c0e400 0 0x200>, /* rx0 */
+				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
+				      <0 0x01c0e600 0 0x170>, /* tx1 */
+				      <0 0x01c0e800 0 0x200>, /* rx1 */
+				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x2500>,
+			      <0 0x01d90000 0 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			iommus = <&apps_smmu 0x300 0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk",
+				"ice_core_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			freq-table-hz =
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 300000000>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8150-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
+				#phy-cells = <0>;
+			};
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <8>;
+			qcom,num-ees = <2>;
+			iommus = <&apps_smmu 0x502 0x0641>,
+				 <&apps_smmu 0x504 0x0011>,
+				 <&apps_smmu 0x506 0x0011>,
+				 <&apps_smmu 0x508 0x0011>,
+				 <&apps_smmu 0x512 0x0000>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x502 0x0641>,
+				 <&apps_smmu 0x504 0x0011>,
+				 <&apps_smmu 0x506 0x0011>,
+				 <&apps_smmu 0x508 0x0011>,
+				 <&apps_smmu 0x512 0x0000>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "memory";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,sm8150-tcsr", "syscon";
+			reg = <0x0 0x01f60000 0x0 0x20000>;
+		};
+
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sm8150-slpi-pas";
+			reg = <0x0 0x02400000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8150_LCX>,
+					<&rpmhpd SM8150_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apss_shared 24>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x05a1 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x05a2 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x05a3 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
+			};
+		};
+
+		gpu: gpu@2c00000 {
+			compatible = "qcom,adreno-640.1", "qcom,adreno";
+			reg = <0 0x02c00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-675000000 {
+					opp-hz = /bits/ 64 <675000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0x2>;
+				};
+
+				opp-585000000 {
+					opp-hz = /bits/ 64 <585000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-499200000 {
+					opp-hz = /bits/ 64 <499200000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-427000000 {
+					opp-hz = /bits/ 64 <427000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-345000000 {
+					opp-hz = /bits/ 64 <345000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0x3>;
+				};
+			};
+		};
+
+		gmu: gmu@2c6a000 {
+			compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
+
+			reg = <0 0x02c6a000 0 0x30000>,
+			      <0 0x0b290000 0 0x10000>,
+			      <0 0x0b490000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			status = "disabled";
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@2c90000 {
+			compatible = "qcom,sm8150-gpucc";
+			reg = <0 0x02c90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@2ca0000 {
+			compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x02ca0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,sm8150-pinctrl";
+			reg = <0x0 0x03100000 0x0 0x300000>,
+			      <0x0 0x03500000 0x0 0x300000>,
+			      <0x0 0x03900000 0x0 0x300000>,
+			      <0x0 0x03D00000 0x0 0x300000>;
+			reg-names = "west", "east", "north", "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 176>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <0x02>;
+				bias-disable;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio114", "gpio115";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio114", "gpio115", "gpio116", "gpio117";
+				function = "qup1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio126", "gpio127";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio126", "gpio127", "gpio128", "gpio129";
+				function = "qup2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio144", "gpio145";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio144", "gpio145", "gpio146", "gpio147";
+				function = "qup3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio51", "gpio52";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio51", "gpio52", "gpio53", "gpio54";
+				function = "qup4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio121", "gpio122";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio119", "gpio120", "gpio121", "gpio122";
+				function = "qup5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi6_default: qup-spi6_default-state {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "qup6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio98", "gpio99";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi7_default: qup-spi7_default-state {
+				pins = "gpio98", "gpio99", "gpio100", "gpio101";
+				function = "qup7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio88", "gpio89";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi8_default: qup-spi8-default-state {
+				pins = "gpio88", "gpio89", "gpio90", "gpio91";
+				function = "qup8";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio39", "gpio40";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi9_default: qup-spi9-default-state {
+				pins = "gpio39", "gpio40", "gpio41", "gpio42";
+				function = "qup9";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart9_default: qup-uart9-default-state {
+				pins = "gpio41", "gpio42";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio9", "gpio10";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi10_default: qup-spi10-default-state {
+				pins = "gpio9", "gpio10", "gpio11", "gpio12";
+				function = "qup10";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio94", "gpio95";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi11_default: qup-spi11-default-state {
+				pins = "gpio92", "gpio93", "gpio94", "gpio95";
+				function = "qup11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio83", "gpio84";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi12_default: qup-spi12-default-state {
+				pins = "gpio83", "gpio84", "gpio85", "gpio86";
+				function = "qup12";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio43", "gpio44";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi13_default: qup-spi13-default-state {
+				pins = "gpio43", "gpio44", "gpio45", "gpio46";
+				function = "qup13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio47", "gpio48";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi14_default: qup-spi14-default-state {
+				pins = "gpio47", "gpio48", "gpio49", "gpio50";
+				function = "qup14";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi15_default: qup-spi15-default-state {
+				pins = "gpio27", "gpio28", "gpio29", "gpio30";
+				function = "qup15";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio86", "gpio85";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi16_default: qup-spi16-default-state {
+				pins = "gpio83", "gpio84", "gpio85", "gpio86";
+				function = "qup16";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi17_default: qup-spi17-default-state {
+				pins = "gpio55", "gpio56", "gpio57", "gpio58";
+				function = "qup17";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c18_default: qup-i2c18-default-state {
+				pins = "gpio23", "gpio24";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi18_default: qup-spi18-default-state {
+				pins = "gpio23", "gpio24", "gpio25", "gpio26";
+				function = "qup18";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio57", "gpio58";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi19_default: qup-spi19-default-state {
+				pins = "gpio55", "gpio56", "gpio57", "gpio58";
+				function = "qup19";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio36";
+					function = "pci_e0";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio37";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio102";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio103";
+					function = "pci_e1";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio104";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8150-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8150_CX>,
+					<&rpmhpd SM8150_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint = <&swao_replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6043000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06043000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel2_out: endpoint {
+						remote-endpoint = <&merge_funnel_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+					funnel2_in2: endpoint {
+						remote-endpoint = <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					merge_funnel_in2: endpoint {
+						remote-endpoint = <&funnel2_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&replicator1_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in0: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06047000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x05e0 0x0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		replicator@604a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x0604a000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					replicator1_out: endpoint {
+						remote-endpoint = <&swao_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					replicator1_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@6b08000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06b08000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_funnel_out: endpoint {
+						remote-endpoint = <&swao_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					swao_funnel_in: endpoint {
+						remote-endpoint = <&replicator1_out>;
+					};
+				};
+			};
+		};
+
+		etf@6b09000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b09000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_etf_out: endpoint {
+						remote-endpoint = <&swao_replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_etf_in: endpoint {
+						remote-endpoint = <&swao_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6b0a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b0a000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
+
+			out-ports {
+				port {
+					swao_replicator_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_replicator_in: endpoint {
+						remote-endpoint = <&swao_etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint = <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint = <&funnel2_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint = <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm8150-cdsp-pas";
+			reg = <0x0 0x08300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8150_CX>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+				mboxes = <&apss_shared 4>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1001 0x0460>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1002 0x0460>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0460>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0460>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0460>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x0460>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x0460>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1008 0x0460>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sm8150-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_2_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8150-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sm8150-qmp-usb3-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x10>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		usb_2_qmpphy: phy@88eb000 {
+			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
+			reg = <0 0x088eb000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			usb_2_ssphy: phy@88eb200 {
+				reg = <0 0x088eb200 0 0x200>,
+				      <0 0x088eb400 0 0x200>,
+				      <0 0x088eb800 0 0x800>,
+				      <0 0x088eb600 0 0x200>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x6a0 0x0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd 0>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sm8150-dc-noc";
+			reg = <0 0x09160000 0 0x3200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sm8150-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x140 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x160 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		camnoc_virt: interconnect@ac00000 {
+			compatible = "qcom,sm8150-camnoc-virt";
+			reg = <0 0x0ac00000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8150-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "bus", "nrt_bus", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x800 0x420>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8150-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-7nm-8150";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-7nm-8150";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8150-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8150-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x0001100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x0100000>,
+			      <0x0 0x0e700000 0x0 0x00a0000>,
+			      <0x0 0x0c40a000 0x0 0x0026000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8150-adsp-pas";
+			reg = <0x0 0x17300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8150_CX>;
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apss_shared 8>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1b23 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1b24 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1b25 0x0>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,sm8150-apss-shared",
+				     "qcom,sdm845-apss-shared";
+			reg = <0x0 0x17c00000 0x0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c26000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8150-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8150-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp6 {
+						opp-level = <224>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sm8150-osm-l3", "qcom,osm-l3";
+			reg = <0 0x18321000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>,
+			      <0 0x18327800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1",
+				    "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		lmh_cluster1: lmh@18350800 {
+			compatible = "qcom,sm8150-lmh";
+			reg = <0 0x18350800 0 0x400>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU4>;
+			qcom,lmh-temp-arm-millicelsius = <60000>;
+			qcom,lmh-temp-low-millicelsius = <84500>;
+			qcom,lmh-temp-high-millicelsius = <85000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		lmh_cluster0: lmh@18358800 {
+			compatible = "qcom,sm8150-lmh";
+			reg = <0 0x18358800 0 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU0>;
+			qcom,lmh-temp-arm-millicelsius = <60000>;
+			qcom,lmh-temp-low-millicelsius = <84500>;
+			qcom,lmh-temp-high-millicelsius = <85000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_mem>;
+			clock-names = "cxo_ref_clk_pin", "qdss";
+			clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>;
+			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x0640 0x1>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		compute-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				compute_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-vec-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				modem_vec_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-scl-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				modem_scl_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
new file mode 100644
index 0000000000..1bbb71e1a4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8250 HDK";
+	compatible = "qcom,sm8250-hdk", "qcom,sm8250";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart12;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1824000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p7: ldo7 {
+			regulator-name = "vreg_l7a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_ts_3p0: ldo13 {
+			regulator-name = "vreg_l13a_ts_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_3p3: ldo16 {
+			regulator-name = "vreg_l16a_3p3";
+			regulator-min-microvolt = <3024000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_2p96: ldo17 {
+			regulator-name = "vreg_l17a_2p96";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p92: ldo18 {
+			regulator-name = "vreg_l18a_0p92";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-name = "vreg_s8c_1p3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p2: ldo2 {
+			regulator-name = "vreg_l2c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-name = "vreg_l4c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_cam_vcm0_2p85: ldo7 {
+			regulator-name = "vreg_l7c_cam_vcm0_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p0: ldo10 {
+			regulator-name = "vreg_l10c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-name = "vreg_l11c_3p3";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_l1f_cam_dvdd1_1p1: ldo1 {
+			regulator-name = "vreg_l1f_cam_dvdd1_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_cam_dvdd0_1p2: ldo2 {
+			regulator-name = "vreg_l2f_cam_dvdd0_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_cam_dvdd2_1p05: ldo3 {
+			regulator-name = "vreg_l3f_cam_dvdd2_1p05";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_cam_avdd0_2p85: ldo5 {
+			regulator-name = "vreg_l5f_cam_avdd0_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_cam_avdd1_2p8: ldo6 {
+			regulator-name = "vreg_l6f_cam_avdd1_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <40 4>;
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l17a_2p96>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_2_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p92>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p92>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&venus {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
new file mode 100644
index 0000000000..7ef99038cb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8250 MTP";
+	compatible = "qcom,sm8250-mtp", "qcom,sm8250";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart12;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s4a_1p8>;
+		vdd-rxtx-supply = <&vreg_s4a_1p8>;
+		vdd-io-supply = <&vreg_s4a_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mmw-pa1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mmw-pa2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-msm-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p875: ldo5 {
+			regulator-name = "vreg_l5a_0p875";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p7: ldo7 {
+			regulator-name = "vreg_l7a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_ts_3p0: ldo13 {
+			regulator-name = "vreg_l13a_ts_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_11ad_io_1p8: ldo15 {
+			regulator-name = "vreg_l15a_11ad_io_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-name = "vreg_s8c_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p2: ldo2 {
+			regulator-name = "vreg_l2c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p92: ldo3 {
+			regulator-name = "vreg_l3c_0p92";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p7: ldo4 {
+			regulator-name = "vreg_l4c_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_cam_vcm0_2p85: ldo7 {
+			regulator-name = "vreg_l7c_cam_vcm0_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p0: ldo10 {
+			regulator-name = "vreg_l10c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-name = "vreg_l11c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_l1f_cam_dvdd1_1p1: ldo1 {
+			regulator-name = "vreg_l1f_cam_dvdd1_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_cam_dvdd0_1p2: ldo2 {
+			regulator-name = "vreg_l2f_cam_dvdd0_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_cam_dvdd2_1p05: ldo3 {
+			regulator-name = "vreg_l3f_cam_dvdd2_1p05";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_cam_avdd0_2p85: ldo5 {
+			regulator-name = "vreg_l5f_cam_avdd0_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_cam_avdd1_2p85: ldo6 {
+			regulator-name = "vreg_l6f_cam_avdd1_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <2856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/a650_zap.mbn";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	/* NQ NFC chip @28 */
+};
+
+&i2c13 {
+	status = "okay";
+
+	/* st,stmfts @ 49 */
+};
+
+&i2c15 {
+	status = "okay";
+
+	/* smb1390 @ 10 */
+	/* rtc6226 @ 64 */
+};
+
+&pm8150_adc {
+	channel@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "xo_therm";
+	};
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "pa_therm1";
+	};
+};
+
+&pm8150_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pa-therm1@2 {
+		reg = <2>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150b_adc {
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "conn_therm";
+	};
+};
+
+&pm8150b_adc_tm {
+	status = "okay";
+
+	conn-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150l_adc_tm {
+	status = "okay";
+
+	camera-flash-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-msm-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pa-therm2@2 {
+		reg = <2>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150l_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "camera_flash_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_msm_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "pa_therm2";
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8250/slpi.mbn";
+};
+
+&sound {
+	compatible = "qcom,sm8250-sndcard";
+	model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"AMIC3", "MIC BIAS3",
+		"AMIC4", "MIC BIAS3",
+		"AMIC5", "MIC BIAS4",
+		"TX SWR_ADC0", "ADC1_OUTPUT",
+		"TX SWR_ADC1", "ADC2_OUTPUT",
+		"TX SWR_ADC2", "ADC3_OUTPUT",
+		"TX SWR_ADC3", "ADC4_OUTPUT",
+		"TX SWR_DMIC0", "DMIC1_OUTPUT",
+		"TX SWR_DMIC1", "DMIC2_OUTPUT",
+		"TX SWR_DMIC2", "DMIC3_OUTPUT",
+		"TX SWR_DMIC3", "DMIC4_OUTPUT",
+		"TX SWR_DMIC4", "DMIC5_OUTPUT",
+		"TX SWR_DMIC5", "DMIC6_OUTPUT",
+		"TX SWR_DMIC6", "DMIC7_OUTPUT",
+		"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
+		};
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+		cpu {
+			sound-dai = <&q6afedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: speaker@0,3 {
+		compatible = "sdw10217211000";
+		reg = <0 3>;
+		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+	};
+
+	right_spkr: speaker@0,4 {
+		compatible = "sdw10217211000";
+		reg = <0 4>;
+		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 3 4 5>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <40 4>;
+
+	wcd938x_reset_default: wcd938x-reset-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
+	};
+
+	wcd938x_reset_sleep: wcd938x-reset-sleep-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p875>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p875>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p875>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
new file mode 100644
index 0000000000..b70bf9261b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8250-sony-xperia-edo.dtsi"
+
+/ {
+	model = "Sony Xperia 1 II";
+	compatible = "sony,pdx203-generic", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+/delete-node/ &vreg_l7f_1p8;
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+		vin5-supply = <&vreg_s1f_1p2>;
+		vin6-supply = <&vreg_s1f_1p2>;
+
+		pinctrl-0 = <&cam_pwr_b_cs>;
+		pinctrl-names = "default";
+
+		regulators {
+			slg51000_1_ldo1: ldo1 {
+				regulator-name = "slg51000_b_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_1_ldo2: ldo2 {
+				regulator-name = "slg51000_b_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_1_ldo3: ldo3 {
+				regulator-name = "slg51000_b_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_1_ldo4: ldo4 {
+				regulator-name = "slg51000_b_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_1_ldo5: ldo5 {
+				regulator-name = "slg51000_b_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_1_ldo6: ldo6 {
+				regulator-name = "slg51000_b_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_1_ldo7: ldo7 {
+				regulator-name = "slg51000_b_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+		vin5-supply = <&vreg_l2f_1p3>;
+		vin6-supply = <&vreg_l2f_1p3>;
+
+		pinctrl-0 = <&cam_pwr_a_cs>;
+		pinctrl-names = "default";
+
+		regulators {
+			slg51000_0_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_0_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_0_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_0_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_0_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_0_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_0_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&pm8009_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "CAM_PWR_LD_EN",
+			  "WIDEC_PWR_EN",
+			  "NC";
+};
+
+&pm8150_gpios {
+	gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+			  "OPTION_2",
+			  "NC",
+			  "PM_SLP_CLK_IN",
+			  "OPTION_1",
+			  "NC",
+			  "NC",
+			  "SP_ARI_PWR_ALARM",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+};
+
+&pm8150b_gpios {
+	gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+			  "FOCUS_N",
+			  "NC",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "LCD_ID",
+			  "NC",
+			  "WLC_EN_N", /* GPIO_10 */
+			  "NC",
+			  "RF_ID";
+};
+
+&pm8150l_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "PM3003A_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "AUX2_THERM",
+			  "BB_HP_EN",
+			  "FP_LDO_EN",
+			  "PMX_RESET_N",
+			  "AUX3_THERM", /* GPIO_10 */
+			  "DTV_PWR_EN",
+			  "PM3003A_MODE";
+};
+
+&tlmm {
+	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+			  "MDM2AP_ERR_FATAL",
+			  "AP_CTI_OUT",
+			  "MDM2AP_STATUS",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_PWR_REQ",
+			  "DVDT_WRT_DET_AND",
+			  "SPK_AMP_RESET_N", /* GPIO_10 */
+			  "SPK_AMP_INT_N",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "TX_GTR_THRES_IN",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_20 */
+			  "HST_BT_EN",
+			  "RGBC_IR_PWR_EN",
+			  "FP_INT_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+			  "NFC_ESE_SPI_CS_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "SDM_DEBUG_UART_TX",
+			  "SDM_DEBUG_UART_RX",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_INT_N",
+			  "FP_SPI_MISO", /* GPIO_40 */
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "DISP_ERR_FG",
+			  "UIM2_DETECT_EN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "MDM_UART_CTS",
+			  "MDM_UART_RFR",
+			  "MDM_UART_TX",
+			  "MDM_UART_RX",
+			  "AP2MDM_STATUS",
+			  "AP2MDM_ERR_FATAL",
+			  "MDM_IPC_HS_UART_TX",
+			  "MDM_IPC_HS_UART_RX",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_PWR_B_CS",
+			  "NC", /* GPIO_70 */
+			  "CAM_PWR_A_CS",
+			  "SBU_SW_SEL",
+			  "SBU_SW_OE",
+			  "FP_RESET_N",
+			  "FP_RESET_N",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "TRAY_DET",
+			  "CAM2_RST_N",
+			  "PCIE0_RST_N",
+			  "PCIE0_CLK_REQ_N", /* GPIO_80 */
+			  "PCIE0_WAKE_N",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_OR",
+			  "NC",
+			  "PCIE2_RST_N",
+			  "PCIE2_CLK_REQ_N",
+			  "PCIE2_WAKE_N",
+			  "MDM_VFR_IRQ0",
+			  "MDM_VFR_IRQ1",
+			  "SW_SERVICE", /* GPIO_90 */
+			  "CAM_SOF",
+			  "CAM1_RST_N",
+			  "CAM0_RST_N",
+			  "CAM0_MCLK",
+			  "CAM1_MCLK",
+			  "CAM2_MCLK",
+			  "CAM3_MCLK",
+			  "CAM4_MCLK",
+			  "TOF_RST_N",
+			  "NC", /* GPIO_100 */
+			  "CCI0_I2C_SDA",
+			  "CCI0_I2C_SCL",
+			  "CCI1_I2C_SDA",
+			  "CCI1_I2C_SCL_",
+			  "CCI2_I2C_SDA",
+			  "CCI2_I2C_SCL",
+			  "CCI3_I2C_SDA",
+			  "CCI3_I2C_SCL",
+			  "CAM3_RST_N",
+			  "NFC_DWL_REQ", /* GPIO_110 */
+			  "NFC_IRQ",
+			  "XVS",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL", /* GPIO_120 */
+			  "ACC_COVER_OPEN",
+			  "ALS_PROX_INT_N",
+			  "ACCEL_INT",
+			  "WLAN_SW_CTRL",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "UDON_SWITCH_SEL",
+			  "WDOG_DISABLE",
+			  "BAROMETER_INT",
+			  "NC", /* GPIO_130 */
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "BT_SLIMBUS_CLK",
+			  "BT_SLIMBUS_DATA",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0", /* GPIO_150 */
+			  "WCD_SWR_RX_DATA1",
+			  "SDM_DMIC_CLK1",
+			  "SDM_DMIC_DATA1",
+			  "SDM_DMIC_CLK2",
+			  "SDM_DMIC_DATA2",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN",
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "COMPASS_I2C_SDA", /* GPIO_160 */
+			  "COMPASS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N",
+			  "NC",
+			  "NC",
+			  "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_SNS_UART6_TX",
+			  "HST_BLE_SNS_UART6_RX",
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+
+	cam_pwr_b_cs: cam-pwr-b-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	cam_pwr_a_cs: cam-pwr-a-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
new file mode 100644
index 0000000000..58a521046f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8250-sony-xperia-edo.dtsi"
+
+/ {
+	model = "Sony Xperia 5 II";
+	compatible = "sony,pdx206-generic", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <1080>;
+	height = <2520>;
+	stride = <(1080 * 4)>;
+};
+
+&gpio_keys {
+	pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
+
+	g-assist-key {
+		label = "Google Assistant Key";
+		linux,code = <KEY_LEFTMETA>;
+		gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+		debounce-interval = <15>;
+		linux,can-disable;
+		wakeup-source;
+	};
+};
+
+&pm8009_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "WIDEC_PWR_EN",
+			  "NC";
+};
+
+&pm8150_gpios {
+	gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+			  "OPTION_2",
+			  "NC",
+			  "PM_SLP_CLK_IN",
+			  "OPTION_1",
+			  "G_ASSIST_N",
+			  "NC",
+			  "SP_ARI_PWR_ALARM",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+
+	g_assist_n: g-assist-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8150b_gpios {
+	gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+			  "FOCUS_N",
+			  "NC",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "LCD_ID",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "RF_ID";
+};
+
+&pm8150l_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "PM3003A_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "AUX2_THERM",
+			  "BB_HP_EN",
+			  "FP_LDO_EN",
+			  "PMX_RESET_N",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "PM3003A_MODE";
+};
+
+&tlmm {
+	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+			  "MDM2AP_ERR_FATAL",
+			  "AP_CTI_OUT",
+			  "MDM2AP_STATUS",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_PWR_REQ",
+			  "DVDT_WRT_DET_AND",
+			  "SPK_AMP_RESET_N", /* GPIO_10 */
+			  "SPK_AMP_INT_N",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "TX_GTR_THRES_IN",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_20 */
+			  "HST_BT_EN",
+			  "RGBC_IR_PWR_EN",
+			  "FP_INT_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+			  "NFC_ESE_SPI_CS_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "SDM_DEBUG_UART_TX",
+			  "SDM_DEBUG_UART_RX",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_INT_N",
+			  "FP_SPI_MISO", /* GPIO_40 */
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "DISP_ERR_FG",
+			  "UIM2_DETECT_EN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "MDM_UART_CTS",
+			  "MDM_UART_RFR",
+			  "MDM_UART_TX",
+			  "MDM_UART_RX",
+			  "AP2MDM_STATUS",
+			  "AP2MDM_ERR_FATAL",
+			  "MDM_IPC_HS_UART_TX",
+			  "MDM_IPC_HS_UART_RX",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_PWR_B_CS",
+			  "NC", /* GPIO_70 */
+			  "FRONTC_PWR_EN",
+			  "SBU_SW_SEL",
+			  "SBU_SW_OE",
+			  "FP_RESET_N",
+			  "FP_RESET_N",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "TRAY_DET",
+			  "CAM2_RST_N",
+			  "PCIE0_RST_N",
+			  "PCIE0_CLK_REQ_N", /* GPIO_80 */
+			  "PCIE0_WAKE_N",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_OR",
+			  "NC",
+			  "PCIE2_RST_N",
+			  "PCIE2_CLK_REQ_N",
+			  "PCIE2_WAKE_N",
+			  "MDM_VFR_IRQ0",
+			  "MDM_VFR_IRQ1",
+			  "SW_SERVICE", /* GPIO_90 */
+			  "CAM_SOF",
+			  "CAM1_RST_N",
+			  "CAM0_RST_N",
+			  "CAM0_MCLK",
+			  "CAM1_MCLK",
+			  "CAM2_MCLK",
+			  "CAM3_MCLK",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_100 */
+			  "CCI0_I2C_SDA",
+			  "CCI0_I2C_SCL",
+			  "CCI1_I2C_SDA",
+			  "CCI1_I2C_SCL_",
+			  "CCI2_I2C_SDA",
+			  "CCI2_I2C_SCL",
+			  "CCI3_I2C_SDA",
+			  "CCI3_I2C_SCL",
+			  "CAM3_RST_N",
+			  "NFC_DWL_REQ", /* GPIO_110 */
+			  "NFC_IRQ",
+			  "XVS",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "ACC_COVER_OPEN",
+			  "ALS_PROX_INT_N",
+			  "ACCEL_INT",
+			  "WLAN_SW_CTRL",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "UDON_SWITCH_SEL",
+			  "WDOG_DISABLE",
+			  "BAROMETER_INT",
+			  "NC", /* GPIO_130 */
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "BT_SLIMBUS_CLK",
+			  "BT_SLIMBUS_DATA",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0", /* GPIO_150 */
+			  "WCD_SWR_RX_DATA1",
+			  "SDM_DMIC_CLK1",
+			  "SDM_DMIC_DATA1",
+			  "SDM_DMIC_CLK2",
+			  "SDM_DMIC_DATA2",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN",
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "COMPASS_I2C_SDA", /* GPIO_160 */
+			  "COMPASS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N",
+			  "NC",
+			  "NC",
+			  "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_SNS_UART6_TX",
+			  "HST_BLE_SNS_UART6_RX",
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
+
+&vreg_l2f_1p3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
new file mode 100644
index 0000000000..ecdc20bc10
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -0,0 +1,715 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &cdsp_secure_heap;
+
+/ {
+	qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x10008 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9c000000 0 0x2300000>;
+			/* pdx203 BL initializes in 2.5k mode, not 4k */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet..
+			 */
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+				 <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+				 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+				 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+				 <&dispcc DISP_CC_MDSS_ESC0_CLK>;
+			power-domains = <&dispcc MDSS_GDSC>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+		pinctrl-names = "default";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		adsp_mem: memory@8a100000 {
+			reg = <0x0 0x8a100000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: memory@8c600000 {
+			reg = <0x0 0x8c600000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@8c700000 {
+			reg = <0x0 0x8c700000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p2>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1824000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p6: smps6 {
+			regulator-name = "vreg_s6a_0p6";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/*
+	 * Remaining regulators that are not yet supported:
+	 * OLEDB: 4925000-8100000
+	 * ab: 4600000-6100000
+	 * ibb: 800000-5400000
+	 */
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p2>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p2: smps8 {
+			regulator-name = "vreg_s8c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3296000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p2>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <111 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	cs35l41_l: speaker-amp@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: speaker-amp@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <39 0x2008>;
+		/* It's "vddio" downstream but it works anyway! */
+		vdd-supply = <&vreg_l1c_1p8>;
+		avdd-supply = <&vreg_l10c_3p3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Qcom SMB1390 @ 10 */
+	/* Qcom SMB1390_slave @ 18 */
+	/* HALO HL6111R Qi charger @ 25 */
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie2 {
+	status = "okay";
+
+	pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>;
+};
+
+&pcie2_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pm8150_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8150b_gpios {
+	snapshot_n: snapshot-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio2";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+};
+
+&slpi {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>, <52 4>;
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	mdm2ap_default: mdm2ap-default-state {
+		pins = "gpio1", "gpio3";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio39";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ap2mdm_default: ap2mdm-default-state {
+		pins = "gpio56", "gpio57";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio77";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&uart12 {
+	status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/Sony/edo/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
new file mode 100644
index 0000000000..de6101ddeb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm8250-xiaomi-elish-common.dtsi"
+
+/ {
+	model = "Xiaomi Mi Pad 5 Pro (BOE)";
+	compatible = "xiaomi,elish", "qcom,sm8250";
+};
+
+&display_panel {
+	compatible = "xiaomi,elish-boe-nt36523", "novatek,nt36523";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
new file mode 100644
index 0000000000..85e5cf3dc9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -0,0 +1,700 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+	classis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x10008 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1600>;
+			height = <2560>;
+			stride = <(1600 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery_l: battery-l {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16600000>;
+		charge-full-design-microamp-hours = <4300000>;
+	};
+
+	battery_r: battery-r {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16600000>;
+		charge-full-design-microamp-hours = <4300000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_n>;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/xiaomi/elish/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/*
+	 * Remaining regulators that are not yet supported:
+	 * OLEDB: 4925000-8100000
+	 * ab: 4600000-6100000
+	 * ibb: 800000-5400000
+	 */
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3296000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p35>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/xiaomi/elish/cdsp.mbn";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_r>;
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_l>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l9a_1p2>;
+	qcom,dual-dsi-mode;
+	qcom,sync-dual-dsi;
+	qcom,master-dsi;
+	status = "okay";
+
+	display_panel: panel@0 {
+		reg = <0>;
+		vddio-supply = <&vreg_l14a_1p88>;
+		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				panel_in_0: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				panel_in_1: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2>;
+	remote-endpoint = <&panel_in_0>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l5a_0p88>;
+	phy-type = <PHY_TYPE_CPHY>;
+	status = "okay";
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l9a_1p2>;
+	qcom,dual-dsi-mode;
+	qcom,sync-dual-dsi;
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	status = "okay";
+};
+
+&mdss_dsi1_out {
+	data-lanes = <0 1 2>;
+	remote-endpoint = <&panel_in_1>;
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p88>;
+	phy-type = <PHY_TYPE_CPHY>;
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>;
+};
+
+&usb_1 {
+	/* USB 2.0 only */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts
new file mode 100644
index 0000000000..4cffe9c703
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm8250-xiaomi-elish-common.dtsi"
+
+/ {
+	model = "Xiaomi Mi Pad 5 Pro (CSOT)";
+	compatible = "xiaomi,elish", "qcom,sm8250";
+};
+
+&display_panel {
+	compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
new file mode 100644
index 0000000000..1a98481d0c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -0,0 +1,6585 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,gcc-sm8250.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
+#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sm8250.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/clock/qcom,camcc-sm8250.h>
+#include <dt-bindings/clock/qcom,videocc-sm8250.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		i2c16 = &i2c16;
+		i2c17 = &i2c17;
+		i2c18 = &i2c18;
+		i2c19 = &i2c19;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+		spi16 = &spi16;
+		spi17 = &spi17;
+		spi18 = &spi18;
+		spi19 = &spi19;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <448>;
+			dynamic-power-coefficient = <105>;
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x20000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-size = <0x400000>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <448>;
+			dynamic-power-coefficient = <105>;
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x20000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <448>;
+			dynamic-power-coefficient = <105>;
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x20000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <448>;
+			dynamic-power-coefficient = <105>;
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x20000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <379>;
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <379>;
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <379>;
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <444>;
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu7_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <360>;
+				exit-latency-us = <531>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3264>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp3: opp-518400000 {
+			opp-hz = /bits/ 64 <518400000>;
+			opp-peak-kBps = <800000 16588800>;
+		};
+
+		cpu0_opp4: opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <800000 16588800>;
+		};
+
+		cpu0_opp5: opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <800000 19660800>;
+		};
+
+		cpu0_opp6: opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu0_opp7: opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <1804000 23347200>;
+		};
+
+		cpu0_opp8: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1804000 26419200>;
+		};
+
+		cpu0_opp9: opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <1804000 29491200>;
+		};
+
+		cpu0_opp10: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <1804000 32563200>;
+		};
+
+		cpu0_opp11: opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <1804000 36249600>;
+		};
+
+		cpu0_opp12: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <2188000 36249600>;
+		};
+
+		cpu0_opp13: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <2188000 39321600>;
+		};
+
+		cpu0_opp14: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 42393600>;
+		};
+
+		cpu0_opp15: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 42393600>;
+		};
+
+		cpu0_opp16: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 42393600>;
+		};
+
+		cpu0_opp17: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 42393600>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp1: opp-710400000 {
+			opp-hz = /bits/ 64 <710400000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu4_opp2: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 23347200>;
+		};
+
+		cpu4_opp3: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 26419200>;
+		};
+
+		cpu4_opp4: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 26419200>;
+		};
+
+		cpu4_opp5: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <3072000 29491200>;
+		};
+
+		cpu4_opp6: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 29491200>;
+		};
+
+		cpu4_opp7: opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu4_opp8: opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu4_opp9: opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <5412000 39321600>;
+		};
+
+		cpu4_opp10: opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <5412000 42393600>;
+		};
+
+		cpu4_opp11: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <5412000 45465600>;
+		};
+
+		cpu4_opp12: opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <6220000 45465600>;
+		};
+
+		cpu4_opp13: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <6220000 48537600>;
+		};
+
+		cpu4_opp14: opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <7216000 48537600>;
+		};
+
+		cpu4_opp15: opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu4_opp16: opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu4_opp17: opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu4_opp18: opp-2419200000 {
+			opp-hz = /bits/ 64 <2419200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	cpu7_opp_table: opp-table-cpu7 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu7_opp1: opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <2188000 19660800>;
+		};
+
+		cpu7_opp2: opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <2188000 26419200>;
+		};
+
+		cpu7_opp3: opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <3072000 26419200>;
+		};
+
+		cpu7_opp4: opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <3072000 29491200>;
+		};
+
+		cpu7_opp5: opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu7_opp6: opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu7_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <4068000 36249600>;
+		};
+
+		cpu7_opp8: opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <5412000 39321600>;
+		};
+
+		cpu7_opp9: opp-1747200000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <5412000 42393600>;
+		};
+
+		cpu7_opp10: opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <6220000 45465600>;
+		};
+
+		cpu7_opp11: opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <6220000 48537600>;
+		};
+
+		cpu7_opp12: opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <7216000 48537600>;
+		};
+
+		cpu7_opp13: opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu7_opp14: opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu7_opp15: opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp16: opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp17: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp18: opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp19: opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp20: opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8250", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			reg = <0x0 0x80700000 0x0 0x160000>;
+			no-map;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		removed_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x5300000>;
+			no-map;
+		};
+
+		camera_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@86700000 {
+			reg = <0x0 0x86700000 0x0 0x100000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@86800000 {
+			reg = <0x0 0x86800000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@86810000 {
+			reg = <0x0 0x86810000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8681a000 {
+			reg = <0x0 0x8681a000 0x0 0x2000>;
+			no-map;
+		};
+
+		npu_mem: memory@86900000 {
+			reg = <0x0 0x86900000 0x0 0x500000>;
+			no-map;
+		};
+
+		video_mem: memory@86e00000 {
+			reg = <0x0 0x86e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		cvp_mem: memory@87300000 {
+			reg = <0x0 0x87300000 0x0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@87800000 {
+			reg = <0x0 0x87800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		slpi_mem: memory@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x1500000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8a100000 {
+			reg = <0x0 0x8a100000 0x0 0x1d00000>;
+			no-map;
+		};
+
+		spss_mem: memory@8be00000 {
+			reg = <0x0 0x8be00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@8bf00000 {
+			reg = <0x0 0x8bf00000 0x0 0x4600000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8250";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,sm8250-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@19b {
+				reg = <0x19b 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x00793000 0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x70000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x76 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x63 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart17: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart18: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00900000 0 0x70000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <15>;
+			dma-channel-mask = <0x7ff>;
+			iommus = <&apps_smmu 0x5b6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x5a3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x70000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8250-config-noc";
+			reg = <0 0x01500000 0 0xa580>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sm8250-system-noc";
+			reg = <0 0x01620000 0 0x1c200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@163d000 {
+			compatible = "qcom,sm8250-mc-virt";
+			reg = <0 0x0163d000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8250-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1f180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8250-aggre2-noc";
+			reg = <0 0x01700000 0 0x33000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@1733000 {
+			compatible = "qcom,sm8250-compute-noc";
+			reg = <0 0x01733000 0 0xa180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8250-mmss-noc";
+			reg = <0 0x01740000 0 0x1f080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sm8250";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>,
+			      <0 0x01c03000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3",
+					  "msi4", "msi5", "msi6", "msi7";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_default_state>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_WIFI_CLKREF_EN>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: phy@1c06200 {
+				reg = <0 0x01c06200 0 0x170>, /* tx */
+				      <0 0x01c06400 0 0x200>, /* rx */
+				      <0 0x01c06800 0 0x1f0>, /* pcs */
+				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sm8250";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>,
+			      <0 0x01c0b000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu",
+				      "ddrss_sf_tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_default_state>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c0e200 {
+				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
+				      <0 0x01c0e400 0 0x200>, /* rx0 */
+				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
+				      <0 0x01c0e600 0 0x170>, /* tx1 */
+				      <0 0x01c0e800 0 0x200>, /* rx1 */
+				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		pcie2: pci@1c10000 {
+			compatible = "qcom,pcie-sm8250";
+			reg = <0 0x01c10000 0 0x3000>,
+			      <0 0x64000000 0 0xf1d>,
+			      <0 0x64000f20 0 0xa8>,
+			      <0 0x64001000 0 0x1000>,
+			      <0 0x64100000 0 0x100000>,
+			      <0 0x01c13000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2_AUX_CLK>,
+				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_MDM_CLKREF_EN>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu",
+				      "ddrss_sf_tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
+				    <0x100 &apps_smmu 0x1d01 0x1>;
+
+			resets = <&gcc GCC_PCIE_2_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2_GDSC>;
+
+			phys = <&pcie2_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie2_default_state>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie2_phy: phy@1c16000 {
+			compatible = "qcom,sm8250-qmp-modem-pcie-phy";
+			reg = <0 0x01c16000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MDM_CLKREF_EN>,
+				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie2_lane: phy@1c16200 {
+				reg = <0 0x01c16200 0 0x170>, /* tx0 */
+				      <0 0x01c16400 0 0x200>, /* rx0 */
+				      <0 0x01c16a00 0 0x1f0>, /* pcs */
+				      <0 0x01c16600 0 0x170>, /* tx1 */
+				      <0 0x01c16800 0 0x200>, /* rx1 */
+				      <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_2_pipe_clk";
+			};
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0x0e0 0>, <&apps_smmu 0x4e0 0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8250-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
+				#phy-cells = <0>;
+			};
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <8>;
+			qcom,num-ees = <2>;
+			iommus = <&apps_smmu 0x592 0x0000>,
+				 <&apps_smmu 0x598 0x0000>,
+				 <&apps_smmu 0x599 0x0000>,
+				 <&apps_smmu 0x59f 0x0000>,
+				 <&apps_smmu 0x586 0x0011>,
+				 <&apps_smmu 0x596 0x0011>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8250-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x592 0x0000>,
+				 <&apps_smmu 0x598 0x0000>,
+				 <&apps_smmu 0x599 0x0000>,
+				 <&apps_smmu 0x59f 0x0000>,
+				 <&apps_smmu 0x586 0x0011>,
+				 <&apps_smmu 0x596 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "memory";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sm8250-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
+				 <&audiocc LPASS_CDC_WSA_NPL>,
+				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&aoncc LPASS_CDC_VA_MCLK>,
+				 <&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+
+			status = "disabled";
+		};
+
+		swr0: soundwire-controller@3250000 {
+			reg = <0 0x03250000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		audiocc: clock-controller@3300000 {
+			compatible = "qcom,sm8250-lpass-audiocc";
+			reg = <0 0x03300000 0 0x30000>;
+			#clock-cells = <1>;
+			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio", "bus";
+		};
+
+		vamacro: codec@3370000 {
+			compatible = "qcom,sm8250-lpass-va-macro";
+			reg = <0 0x03370000 0 0x1000>;
+			clocks = <&aoncc LPASS_CDC_VA_MCLK>,
+				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+			clock-names = "mclk", "macro", "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		rxmacro: rxmacro@3200000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			compatible = "qcom,sm8250-lpass-rx-macro";
+			reg = <0 0x03200000 0 0x1000>;
+			status = "disabled";
+
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@3210000 {
+			reg = <0 0x03210000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			status = "disabled";
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		txmacro: txmacro@3220000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			compatible = "qcom,sm8250-lpass-tx-macro";
+			reg = <0 0x03220000 0 0x1000>;
+			status = "disabled";
+
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		/* tx macro */
+		swr2: soundwire-controller@3230000 {
+			reg = <0 0x03230000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core";
+			status = "disabled";
+
+			clocks = <&txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <5>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0xff 0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0xff 0x01 0x00 0x02 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0x00 0x01 0x00 0x01>;
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		aoncc: clock-controller@3380000 {
+			compatible = "qcom,sm8250-lpass-aoncc";
+			reg = <0 0x03380000 0 0x40000>;
+			#clock-cells = <1>;
+			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio", "bus";
+		};
+
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+			reg = <0 0x033c0000 0x0 0x20000>,
+			      <0 0x03550000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 14>;
+
+			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa_swr_sleep: wsa-swr-sleep-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			dmic01_active: dmic01-active-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+				};
+			};
+
+			dmic01_sleep: dmic01-sleep-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			tx_swr_sleep: tx-swr-sleep-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				data1-pins {
+					pins = "gpio1";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data2-pins {
+					pins = "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-650.2",
+				     "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-670000000 {
+					opp-hz = /bits/ 64 <670000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0xa>;
+				};
+
+				opp-587000000 {
+					opp-hz = /bits/ 64 <587000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0xb>;
+				};
+
+				opp-525000000 {
+					opp-hz = /bits/ 64 <525000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-490000000 {
+					opp-hz = /bits/ 64 <490000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-441600000 {
+					opp-hz = /bits/ 64 <441600000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-305000000 {
+					opp-hz = /bits/ 64 <305000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0xf>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
+
+			reg = <0 0x03d6a000 0 0x30000>,
+			      <0 0x3de0000 0 0x10000>,
+			      <0 0xb290000 0 0x10000>,
+			      <0 0xb490000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			status = "disabled";
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8250-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
+		slpi: remoteproc@5c00000 {
+			compatible = "qcom,sm8250-slpi-pas";
+			reg = <0 0x05c00000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "slpi";
+				qcom,remote-pid = <3>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0541 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0542 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0543 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
+			};
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>, <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		tpda@6004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0 0x06004000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					tpda_out_funnel_qatb: endpoint {
+						remote-endpoint = <&funnel_qatb_in_tpda>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@9 {
+					reg = <9>;
+					tpda_9_in_tpdm_mm: endpoint {
+						remote-endpoint = <&tpdm_mm_out_tpda9>;
+					};
+				};
+
+				port@17 {
+					reg = <23>;
+					tpda_23_in_tpdm_prng: endpoint {
+						remote-endpoint = <&tpdm_prng_out_tpda_23>;
+					};
+				};
+			};
+		};
+
+		funnel@6005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06005000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_qatb_out_funnel_in0: endpoint {
+						remote-endpoint = <&funnel_in0_in_funnel_qatb>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_qatb_in_tpda: endpoint {
+						remote-endpoint = <&tpda_out_funnel_qatb>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_in0_out_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_in_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel_in0_in_funnel_qatb: endpoint {
+						remote-endpoint = <&funnel_qatb_out_funnel_in0>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_in1_out_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_in_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel_in1_in_funnel_apss_merg: endpoint {
+					remote-endpoint = <&funnel_apss_merg_out_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_merg_out_funnel_swao: endpoint {
+					remote-endpoint = <&funnel_swao_in_funnel_merg>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_merg_in_funnel_in0: endpoint {
+					remote-endpoint = <&funnel_in0_out_funnel_merg>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_merg_in_funnel_in1: endpoint {
+					remote-endpoint = <&funnel_in1_out_funnel_merg>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_cx_in_swao_out: endpoint {
+						remote-endpoint = <&replicator_swao_out_cx_in>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@684c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0 0x0684c000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_prng_out_tpda_23: endpoint {
+						remote-endpoint = <&tpda_23_in_tpdm_prng>;
+					};
+				};
+			};
+		};
+
+		funnel@6b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			arm,primecell-periphid = <0x000bb908>;
+
+			reg = <0 0x06b04000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_swao_out_etf: endpoint {
+						remote-endpoint = <&etf_in_funnel_swao_out>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel_swao_in_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_out_funnel_swao>;
+					};
+				};
+			};
+		};
+
+		etf@6b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b05000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etf_in_funnel_swao_out: endpoint {
+						remote-endpoint = <&funnel_swao_out_etf>;
+					};
+				};
+			};
+		};
+
+		replicator@6b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b06000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_swao_out_cx_in: endpoint {
+						remote-endpoint = <&replicator_cx_in_swao_out>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@6c08000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0 0x06c08000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_mm_out_funnel_dl_mm: endpoint {
+						remote-endpoint = <&funnel_dl_mm_in_tpdm_mm>;
+					};
+				};
+			};
+		};
+
+		funnel@6c0b000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06c0b000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_dl_mm_out_funnel_dl_center: endpoint {
+					remote-endpoint = <&funnel_dl_center_in_funnel_dl_mm>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@3 {
+					reg = <3>;
+					funnel_dl_mm_in_tpdm_mm: endpoint {
+						remote-endpoint = <&tpdm_mm_out_funnel_dl_mm>;
+					};
+				};
+			};
+		};
+
+		funnel@6c2d000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06c2d000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port {
+					tpdm_mm_out_tpda9: endpoint {
+						remote-endpoint = <&tpda_9_in_tpdm_mm>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+					funnel_dl_center_in_funnel_dl_mm: endpoint {
+					remote-endpoint = <&funnel_dl_mm_out_funnel_dl_center>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_apss_out_funnel_apss_merg: endpoint {
+					remote-endpoint = <&funnel_apss_merg_in_funnel_apss>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_apss_merg_out_funnel_in1: endpoint {
+					remote-endpoint = <&funnel_in1_in_funnel_apss_merg>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_apss_merg_in_funnel_apss: endpoint {
+					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
+					};
+				};
+			};
+		};
+
+		cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm8250-cdsp-pas";
+			reg = <0 0x08300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1001 0x0460>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1002 0x0460>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0460>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0460>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0460>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x0460>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x0460>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1008 0x0460>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8250-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_2_hsphy: phy@88e4000 {
+			compatible = "qcom,sm8250-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e4000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sm8250-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x200>,
+			      <0 0x088e8000 0 0x40>,
+			      <0 0x088ea000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x400>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#phy-cells = <0>;
+				#clock-cells = <1>;
+			};
+		};
+
+		usb_2_qmpphy: phy@88eb000 {
+			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
+			reg = <0 0x088eb000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			usb_2_ssphy: phy@88eb200 {
+				reg = <0 0x088eb200 0 0x200>,
+				      <0 0x088eb400 0 0x200>,
+				      <0 0x088eb800 0 0x800>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,sm8250-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x09091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI_CH0 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-800000 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1200000 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-1804000 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-2188000 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-2724000 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-3072000 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-4068000 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				/* 1353 MHz, LPDDR4X */
+
+				opp-6220000 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-7216000 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+
+				opp-8368000 {
+					opp-peak-kBps = <(2092 * 4 * 1000)>;
+				};
+
+				/* LPDDR5 */
+				opp-10944000 {
+					opp-peak-kBps = <(2736 * 4 * 1000)>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,sm8250-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x090b6400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &gem_noc SLAVE_LLCC 3>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-800000 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1804000 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-2188000 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-2724000 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-3072000 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				/* 1017MHz, 1353 MHz, LPDDR4X */
+
+				opp-6220000 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-6832000 {
+					opp-peak-kBps = <(1708 * 4 * 1000)>;
+				};
+
+				opp-8368000 {
+					opp-peak-kBps = <(2092 * 4 * 1000)>;
+				};
+
+				/* 2133MHz, LPDDR4X */
+
+				/* LPDDR5 */
+				opp-10944000 {
+					opp-peak-kBps = <(2736 * 4 * 1000)>;
+				};
+
+				/* LPDDR5 */
+				opp-12784000 {
+					opp-peak-kBps = <(3196 * 4 * 1000)>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@90c0000 {
+			compatible = "qcom,sm8250-dc-noc";
+			reg = <0 0x090c0000 0 0x4200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			compatible = "qcom,sm8250-gem-noc";
+			reg = <0 0x09100000 0 0xb4000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sm8250-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sm8250-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x20 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sm8250-venus";
+			reg = <0 0x0aa00000 0 0x100000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc MVS0C_GDSC>,
+					<&videocc MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MX>;
+			power-domain-names = "venus", "vcodec0", "mx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface", "core", "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_VENUS_CFG 0>,
+					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "cpu-cfg", "video-mem";
+
+			iommus = <&apps_smmu 0x2100 0x0400>;
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+				 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+			reset-names = "bus", "core";
+
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-720000000 {
+					opp-hz = /bits/ 64 <720000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-1014000000 {
+					opp-hz = /bits/ 64 <1014000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-1098000000 {
+					opp-hz = /bits/ 64 <1098000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-1332000000 {
+					opp-hz = /bits/ 64 <1332000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		videocc: clock-controller@abf0000 {
+			compatible = "qcom,sm8250-videocc";
+			reg = <0 0x0abf0000 0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		cci0: cci@ac4f000 {
+			compatible = "qcom,sm8250-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4f000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			pinctrl-0 = <&cci0_default>;
+			pinctrl-1 = <&cci0_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac50000 {
+			compatible = "qcom,sm8250-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac50000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			pinctrl-0 = <&cci1_default>;
+			pinctrl-1 = <&cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: camss@ac6a000 {
+			compatible = "qcom,sm8250-camss";
+			status = "disabled";
+
+			reg = <0 0x0ac6a000 0 0x2000>,
+			      <0 0x0ac6c000 0 0x2000>,
+			      <0 0x0ac6e000 0 0x1000>,
+			      <0 0x0ac70000 0 0x1000>,
+			      <0 0x0ac72000 0 0x1000>,
+			      <0 0x0ac74000 0 0x1000>,
+			      <0 0x0acb4000 0 0xd000>,
+			      <0 0x0acc3000 0 0xd000>,
+			      <0 0x0acd9000 0 0x2200>,
+			      <0 0x0acdb200 0 0x2200>;
+			reg-names = "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "csiphy4",
+				    "csiphy5",
+				    "vfe0",
+				    "vfe1",
+				    "vfe_lite0",
+				    "vfe_lite1";
+
+			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "csiphy4",
+					  "csiphy5",
+					  "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid3",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			power-domains = <&camcc IFE_0_GDSC>,
+					<&camcc IFE_1_GDSC>,
+					<&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY5_CLK>,
+				 <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_IFE_0_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_0_AREG_CLK>,
+				 <&camcc CAM_CC_IFE_1_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_AREG_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+
+			clock-names = "cam_ahb_clk",
+				      "cam_hf_axi",
+				      "cam_sf_axi",
+				      "camnoc_axi",
+				      "camnoc_axi_src",
+				      "core_ahb",
+				      "cpas_ahb",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "csiphy5",
+				      "csiphy5_timer",
+				      "slow_ahb_src",
+				      "vfe0_ahb",
+				      "vfe0_axi",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe0_csid",
+				      "vfe0_areg",
+				      "vfe1_ahb",
+				      "vfe1_axi",
+				      "vfe1",
+				      "vfe1_cphy_rx",
+				      "vfe1_csid",
+				      "vfe1_areg",
+				      "vfe_lite_ahb",
+				      "vfe_lite_axi",
+				      "vfe_lite",
+				      "vfe_lite_cphy_rx",
+				      "vfe_lite_csid";
+
+			iommus = <&apps_smmu 0x800 0x400>,
+				 <&apps_smmu 0x801 0x400>,
+				 <&apps_smmu 0x840 0x400>,
+				 <&apps_smmu 0x841 0x400>,
+				 <&apps_smmu 0xc00 0x400>,
+				 <&apps_smmu 0xc01 0x400>,
+				 <&apps_smmu 0xc40 0x400>,
+				 <&apps_smmu 0xc41 0x400>;
+
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_CAMERA_CFG 0>,
+					<&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "cam_ahb",
+					     "cam_hf_0_mnoc",
+					     "cam_sf_0_mnoc",
+					     "cam_sf_icp_mnoc";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+
+				port@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sm8250-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			status = "disabled";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8250-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "bus", "nrt_bus", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x820 0x402>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8250-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8250-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-7nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8250-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-7nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8250-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&dp_phy 0>,
+				 <&dp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8250-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <9>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+						     IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP
+					IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x0001100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x0100000>,
+			      <0x0 0x0e700000 0x0 0x00a0000>,
+			      <0x0 0x0c40a000 0x0 0x0026000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8250-pinctrl";
+			reg = <0 0x0f100000 0 0x300000>,
+			      <0 0x0f500000 0 0x300000>,
+			      <0 0x0f900000 0 0x300000>;
+			reg-names = "west", "south", "north";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 181>;
+			wakeup-parent = <&pdc>;
+
+			cam2_default: cam2-default-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cam2_suspend: cam2-suspend-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
+					/* SDA, SCL */
+					pins = "gpio101", "gpio102";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci0_i2c1_default: cci0-i2c1-default-pins {
+					/* SDA, SCL */
+					pins = "gpio103", "gpio104";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+					/* SDA, SCL */
+					pins = "gpio101", "gpio102";
+					function = "cci_i2c";
+
+					drive-strength = <2>; /* 2 mA */
+					bias-pull-down;
+				};
+
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+					/* SDA, SCL */
+					pins = "gpio103", "gpio104";
+					function = "cci_i2c";
+
+					drive-strength = <2>; /* 2 mA */
+					bias-pull-down;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
+					/* SDA, SCL */
+					pins = "gpio105","gpio106";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci1_i2c1_default: cci1-i2c1-default-pins {
+					/* SDA, SCL */
+					pins = "gpio107","gpio108";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+					/* SDA, SCL */
+					pins = "gpio105","gpio106";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+					/* SDA, SCL */
+					pins = "gpio107","gpio108";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			pri_mi2s_active: pri-mi2s-active-state {
+				sclk-pins {
+					pins = "gpio138";
+					function = "mi2s0_sck";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				ws-pins {
+					pins = "gpio141";
+					function = "mi2s0_ws";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data0-pins {
+					pins = "gpio139";
+					function = "mi2s0_data0";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+
+				data1-pins {
+					pins = "gpio140";
+					function = "mi2s0_data1";
+					drive-strength = <8>;
+					output-high;
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio115", "gpio116";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio119", "gpio120";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio16", "gpio17";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio20", "gpio21";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio24", "gpio25";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio125", "gpio126";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio129", "gpio130";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio60", "gpio61";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio32", "gpio33";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio36", "gpio37";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio40", "gpio41";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio44", "gpio45";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio48", "gpio49";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio52", "gpio53";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c18_default: qup-i2c18-default-state {
+				pins = "gpio56", "gpio57";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio31";
+				function = "qup0";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio31";
+				function = "gpio";
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				pins = "gpio28", "gpio29",
+				       "gpio30";
+				function = "qup0";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup1";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio7";
+				function = "gpio";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio4", "gpio5",
+				       "gpio6";
+				function = "qup1";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio118";
+				function = "qup2";
+			};
+
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+				pins = "gpio118";
+				function = "gpio";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio115", "gpio116",
+				       "gpio117";
+				function = "qup2";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio122";
+				function = "qup3";
+			};
+
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio122";
+				function = "gpio";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio119", "gpio120",
+				       "gpio121";
+				function = "qup3";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio11";
+				function = "qup4";
+			};
+
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+				pins = "gpio11";
+				function = "gpio";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio8", "gpio9",
+				       "gpio10";
+				function = "qup4";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio15";
+				function = "qup5";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio15";
+				function = "gpio";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio12", "gpio13",
+				       "gpio14";
+				function = "qup5";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio19";
+				function = "qup6";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio19";
+				function = "gpio";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio16", "gpio17",
+				       "gpio18";
+				function = "qup6";
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio23";
+				function = "qup7";
+			};
+
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
+				pins = "gpio23";
+				function = "gpio";
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				pins = "gpio20", "gpio21",
+				       "gpio22";
+				function = "qup7";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio27";
+				function = "qup8";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio27";
+				function = "gpio";
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				pins = "gpio24", "gpio25",
+				       "gpio26";
+				function = "qup8";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio128";
+				function = "qup9";
+			};
+
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
+				pins = "gpio128";
+				function = "gpio";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio125", "gpio126",
+				       "gpio127";
+				function = "qup9";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio132";
+				function = "qup10";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio132";
+				function = "gpio";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio129", "gpio130",
+				       "gpio131";
+				function = "qup10";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio63";
+				function = "qup11";
+			};
+
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+				pins = "gpio63";
+				function = "gpio";
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				pins = "gpio60", "gpio61",
+				       "gpio62";
+				function = "qup11";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio35";
+				function = "qup12";
+			};
+
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
+				pins = "gpio35";
+				function = "gpio";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio32", "gpio33",
+				       "gpio34";
+				function = "qup12";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio39";
+				function = "qup13";
+			};
+
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
+				pins = "gpio39";
+				function = "gpio";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio36", "gpio37",
+				       "gpio38";
+				function = "qup13";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio43";
+				function = "qup14";
+			};
+
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
+				pins = "gpio43";
+				function = "gpio";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio40", "gpio41",
+				       "gpio42";
+				function = "qup14";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio47";
+				function = "qup15";
+			};
+
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
+				pins = "gpio47";
+				function = "gpio";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio44", "gpio45",
+				       "gpio46";
+				function = "qup15";
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio51";
+				function = "qup16";
+			};
+
+			qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
+				pins = "gpio51";
+				function = "gpio";
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				pins = "gpio48", "gpio49",
+				       "gpio50";
+				function = "qup16";
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio55";
+				function = "qup17";
+			};
+
+			qup_spi17_cs_gpio: qup-spi17-cs-gpio-state {
+				pins = "gpio55";
+				function = "gpio";
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				pins = "gpio52", "gpio53",
+				       "gpio54";
+				function = "qup17";
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio59";
+				function = "qup18";
+			};
+
+			qup_spi18_cs_gpio: qup-spi18-cs-gpio-state {
+				pins = "gpio59";
+				function = "gpio";
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				pins = "gpio56", "gpio57",
+				       "gpio58";
+				function = "qup18";
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio3";
+				function = "qup19";
+			};
+
+			qup_spi19_cs_gpio: qup-spi19-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				pins = "gpio0", "gpio1",
+				       "gpio2";
+				function = "qup19";
+			};
+
+			qup_uart2_default: qup-uart2-default-state {
+				pins = "gpio117", "gpio118";
+				function = "qup2";
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "qup6";
+			};
+
+			qup_uart12_default: qup-uart12-default-state {
+				pins = "gpio34", "gpio35";
+				function = "qup12";
+			};
+
+			qup_uart17_default: qup-uart17-default-state {
+				pins = "gpio52", "gpio53", "gpio54", "gpio55";
+				function = "qup17";
+			};
+
+			qup_uart18_default: qup-uart18-default-state {
+				pins = "gpio58", "gpio59";
+				function = "qup18";
+			};
+
+			tert_mi2s_active: tert-mi2s-active-state {
+				sck-pins {
+					pins = "gpio133";
+					function = "mi2s2_sck";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				data0-pins {
+					pins = "gpio134";
+					function = "mi2s2_data0";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+
+				ws-pins {
+					pins = "gpio135";
+					function = "mi2s2_ws";
+					drive-strength = <8>;
+					output-high;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio79";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio80";
+					function = "pci_e0";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio81";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio82";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio83";
+					function = "pci_e1";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio84";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie2_default_state: pcie2-default-state {
+				perst-pins {
+					pins = "gpio85";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio86";
+					function = "pci_e2";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio87";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8250-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+		};
+
+		adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8250-adsp-pas";
+			reg = <0 0x17300000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8250-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8250-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sm8250-epss-l3", "qcom,epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1",
+				    "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		compute-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				compute_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
new file mode 100644
index 0000000000..4013d25a7d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -0,0 +1,870 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020-2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pmk8350.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8350 HDK";
+	compatible = "qcom,sm8350-hdk", "qcom,sm8350";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lt9611_1v2: lt9611-1v2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V2";
+
+		vin-supply = <&vph_pwr>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	lt9611_3v3: lt9611-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+
+		vin-supply = <&vreg_bob>;
+		gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_0p88: ldo1 {
+			regulator-name = "vreg_l1b_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l5b_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+		vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-name = "vreg_l2c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_1p2: ldo10 {
+			regulator-name = "vreg_l10c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/cdsp.mbn";
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy  {
+	vdds-supply = <&vreg_l5b_0p88>;
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8350/a660_zap.mbn";
+	};
+};
+
+&i2c13 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 50 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_state>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp0_out: endpoint {
+				data-lanes = <0 1>;
+				remote-endpoint = <&usb_1_qmpphy_dp_in>;
+			};
+		};
+	};
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/modem.mbn";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <52 8>;
+
+	gpio-line-names =
+		"APPS_I2C_SDA", /* GPIO_0 */
+		"APPS_I2C_SCL",
+		"FSA_INT_N",
+		"USER_LED3_EN",
+		"SMBUS_SDA_1P8",
+		"SMBUS_SCL_1P8",
+		"2M2_3P3_EN",
+		"ALERT_DUAL_M2_N",
+		"EXP_UART_CTS",
+		"EXP_UART_RFR",
+		"EXP_UART_TX", /* GPIO_10 */
+		"EXP_UART_RX",
+		"NC",
+		"NC",
+		"RCM_MARKER1",
+		"WSA0_EN",
+		"CAM1_RESET_N",
+		"CAM0_RESET_N",
+		"DEBUG_UART_TX",
+		"DEBUG_UART_RX",
+		"TS_I2C_SDA", /* GPIO_20 */
+		"TS_I2C_SCL",
+		"TS_RESET_N",
+		"TS_INT_N",
+		"DISP0_RESET_N",
+		"DISP1_RESET_N",
+		"ETH_RESET",
+		"RCM_MARKER2",
+		"CAM_DC_MIPI_MUX_EN",
+		"CAM_DC_MIPI_MUX_SEL",
+		"AFC_PHY_TA_D_PLUS", /* GPIO_30 */
+		"AFC_PHY_TA_D_MINUS",
+		"PM8008_1_IRQ",
+		"PM8008_1_RESET_N",
+		"PM8008_2_IRQ",
+		"PM8008_2_RESET_N",
+		"CAM_DC_I3C_SDA",
+		"CAM_DC_I3C_SCL",
+		"FP_INT_N",
+		"FP_WUHB_INT_N",
+		"SMB_SPMI_DATA", /* GPIO_40 */
+		"SMB_SPMI_CLK",
+		"USB_HUB_RESET",
+		"FORCE_USB_BOOT",
+		"LRF_IRQ",
+		"NC",
+		"IMU2_INT",
+		"HDMI_3P3_EN",
+		"HDMI_RSTN",
+		"HDMI_1P2_EN",
+		"HDMI_INT", /* GPIO_50 */
+		"USB1_ID",
+		"FP_SPI_MISO",
+		"FP_SPI_MOSI",
+		"FP_SPI_CLK",
+		"FP_SPI_CS_N",
+		"NFC_ESE_SPI_MISO",
+		"NFC_ESE_SPI_MOSI",
+		"NFC_ESE_SPI_CLK",
+		"NFC_ESE_SPI_CS",
+		"NFC_I2C_SDA", /* GPIO_60 */
+		"NFC_I2C_SCLC",
+		"NFC_EN",
+		"NFC_CLK_REQ",
+		"HST_WLAN_EN",
+		"HST_BT_EN",
+		"HST_SW_CTRL",
+		"NC",
+		"HST_BT_UART_CTS",
+		"HST_BT_UART_RFR",
+		"HST_BT_UART_TX", /* GPIO_70 */
+		"HST_BT_UART_RX",
+		"CAM_DC_SPI0_MISO",
+		"CAM_DC_SPI0_MOSI",
+		"CAM_DC_SPI0_CLK",
+		"CAM_DC_SPI0_CS_N",
+		"CAM_DC_SPI1_MISO",
+		"CAM_DC_SPI1_MOSI",
+		"CAM_DC_SPI1_CLK",
+		"CAM_DC_SPI1_CS_N",
+		"HALL_INT_N", /* GPIO_80 */
+		"USB_PHY_PS",
+		"MDP_VSYNC_P",
+		"MDP_VSYNC_S",
+		"ETH_3P3_EN",
+		"RADAR_INT",
+		"NFC_DWL_REQ",
+		"SM_GPIO_87",
+		"WCD_RESET_N",
+		"ALSP_INT_N",
+		"PRESS_INT", /* GPIO_90 */
+		"SAR_INT_N",
+		"SD_CARD_DET_N",
+		"NC",
+		"PCIE0_RESET_N",
+		"PCIE0_CLK_REQ_N",
+		"PCIE0_WAKE_N",
+		"PCIE1_RESET_N",
+		"PCIE1_CLK_REQ_N",
+		"PCIE1_WAKE_N",
+		"CAM_MCLK0", /* GPIO_100 */
+		"CAM_MCLK1",
+		"CAM_MCLK2",
+		"CAM_MCLK3",
+		"CAM_MCLK4",
+		"CAM_MCLK5",
+		"CAM2_RESET_N",
+		"CCI_I2C0_SDA",
+		"CCI_I2C0_SCL",
+		"CCI_I2C1_SDA",
+		"CCI_I2C1_SCL", /* GPIO_110 */
+		"CCI_I2C2_SDA",
+		"CCI_I2C2_SCL",
+		"CCI_I2C3_SDA",
+		"CCI_I2C3_SCL",
+		"CAM5_RESET_N",
+		"CAM4_RESET_N",
+		"CAM3_RESET_N",
+		"IMU1_INT",
+		"MAG_INT_N",
+		"MI2S2_I2S_SCK", /* GPIO_120 */
+		"MI2S2_I2S_DAT0",
+		"MI2S2_I2S_WS",
+		"HIFI_DAC_I2S_MCLK",
+		"MI2S2_I2S_DAT1",
+		"HIFI_DAC_I2S_SCK",
+		"HIFI_DAC_I2S_DAT0",
+		"NC",
+		"HIFI_DAC_I2S_WS",
+		"HST_BT_WLAN_SLIMBUS_CLK",
+		"HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+		"BT_LED_EN",
+		"WLAN_LED_EN",
+		"NC",
+		"NC",
+		"NC",
+		"UIM2_PRESENT",
+		"NC",
+		"NC",
+		"NC",
+		"UIM1_PRESENT", /* GPIO_140 */
+		"NC",
+		"SM_RFFE0_DATA",
+		"NC",
+		"SM_RFFE1_DATA",
+		"SM_MSS_GRFC4",
+		"SM_MSS_GRFC5",
+		"SM_MSS_GRFC6",
+		"SM_MSS_GRFC7",
+		"SM_RFFE4_CLK",
+		"SM_RFFE4_DATA", /* GPIO_150 */
+		"WLAN_COEX_UART1_RX",
+		"WLAN_COEX_UART1_TX",
+		"HST_SW_CTRL",
+		"DSI0_STATUS",
+		"DSI1_STATUS",
+		"APPS_PBL_BOOT_SPEED_1",
+		"APPS_BOOT_FROM_ROM",
+		"APPS_PBL_BOOT_SPEED_0",
+		"QLINK0_REQ",
+		"QLINK0_EN", /* GPIO_160 */
+		"QLINK0_WMSS_RESET_N",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"WCD_SWR_TX_CLK",
+		"WCD_SWR_TX_DATA0",
+		"WCD_SWR_TX_DATA1", /* GPIO_170 */
+		"WCD_SWR_RX_CLK",
+		"WCD_SWR_RX_DATA0",
+		"WCD_SWR_RX_DATA1",
+		"DMIC01_CLK",
+		"DMIC01_DATA",
+		"DMIC23_CLK",
+		"DMIC23_DATA",
+		"WSA_SWR_CLK",
+		"WSA_SWR_DATA",
+		"DMIC45_CLK", /* GPIO_180 */
+		"DMIC45_DATA",
+		"WCD_SWR_TX_DATA2",
+		"SENSOR_I3C_SDA",
+		"SENSOR_I3C_SCL",
+		"CAM_OIS0_I3C_SDA",
+		"CAM_OIS0_I3C_SCL",
+		"IMU_SPI_MISO",
+		"IMU_SPI_MOSI",
+		"IMU_SPI_CLK",
+		"IMU_SPI_CS_N", /* GPIO_190 */
+		"MAG_I2C_SDA",
+		"MAG_I2C_SCL",
+		"SENSOR_I2C_SDA",
+		"SENSOR_I2C_SCL",
+		"RADAR_SPI_MISO",
+		"RADAR_SPI_MOSI",
+		"RADAR_SPI_CLK",
+		"RADAR_SPI_CS_N",
+		"HST_BLE_UART_TX",
+		"HST_BLE_UART_RX", /* GPIO_200 */
+		"HST_WLAN_UART_TX",
+		"HST_WLAN_UART_RX";
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio94";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio95";
+			function = "pcie0_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio96";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio97";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio98";
+			function = "pcie1_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p96>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p88>;
+
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_hub_enabled_state>;
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+};
+
+/* PINCTRL - additions to nodes defined in sm8350.dtsi */
+
+&tlmm {
+	usb_hub_enabled_state: usb-hub-enabled-state {
+		pins = "gpio42";
+		function = "gpio";
+
+		drive-strength = <2>;
+		output-low;
+	};
+
+	lt9611_state: lt9611-state {
+		rst-pins {
+			pins = "gpio48";
+			function = "gpio";
+
+			output-high;
+			input-disable;
+		};
+
+		irq-pins {
+			pins = "gpio50";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
new file mode 100644
index 0000000000..3bd5e57cbc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2021, Microsoft Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	model = "Microsoft Surface Duo 2";
+	compatible = "microsoft,surface-duo2", "qcom,sm8350";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+		vdd-l8-supply = <&vreg_s2c_0p8>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+		};
+
+		vreg_l1b_0p88: ldo1 {
+			regulator-name = "vreg_l1b_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+		vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-name = "vreg_l2c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_uim1: ldo4 {
+			regulator-name = "vreg_l4c_uim1";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_uim2: ldo5 {
+			regulator-name = "vreg_l5c_uim2";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_1p2: ldo10 {
+			regulator-name = "vreg_l10c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p96: ldo11 {
+			regulator-name = "vreg_l11c_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/cdsp.mbn";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/modem.mbn";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <4 4>, <12 4>, <56 4>, <76 4>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p96>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p88>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
new file mode 100644
index 0000000000..c5a6c87456
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sm8350 MTP";
+	compatible = "qcom,sm8350-mtp", "qcom,sm8350";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+		vdd-l8-supply = <&vreg_s2c_0p8>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+		};
+
+		vreg_l1b_0p88: ldo1 {
+			regulator-name = "vreg_l1b_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+		vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-name = "vreg_l2c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_uim1: ldo4 {
+			regulator-name = "vreg_l4c_uim1";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_uim2: ldo5 {
+			regulator-name = "vreg_l5c_uim2";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_1p2: ldo10 {
+			regulator-name = "vreg_l10c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p96: ldo11 {
+			regulator-name = "vreg_l11c_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/cdsp.mbn";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/modem.mbn";
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <52 8>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p96>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p88>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts
new file mode 100644
index 0000000000..e6824c8c27
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8350-sony-xperia-sagami.dtsi"
+
+/ {
+	model = "Sony Xperia 5 III";
+	compatible = "sony,pdx214-generic", "qcom,sm8350";
+};
+
+&framebuffer {
+	width = <1080>;
+	height = <2520>;
+	stride = <(1080 * 4)>;
+};
+
+&pm8350b_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "NC",
+			  "NC",
+			  "FOCUS_N";
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_PWR_EN",
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
new file mode 100644
index 0000000000..c6f402c3ef
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8350-sony-xperia-sagami.dtsi"
+
+/ {
+	model = "Sony Xperia 1 III";
+	compatible = "sony,pdx215-generic", "qcom,sm8350";
+};
+
+&i2c13 {
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_pwr_a_cs>;
+
+		regulators {
+			slg51000_a_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&pm8350b_gpios {
+	gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "CAM_PWR_LD_EN",
+			  "NC",
+			  "FOCUS_N";
+
+	cam_pwr_a_cs: cam-pwr-a-cs-state {
+		pins = "gpio1";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <1>;
+		drive-push-pull;
+		output-high;
+	};
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "NC",
+			  "WLC_TXPWR_EN",
+			  "NC",
+			  "RGBC_IR_PWR_EN",
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+};
+
+&tlmm {
+	gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+			  "APPS_I2C_0_SCL",
+			  "UWIDEC_PWR_EN",
+			  "HAP_RST_N",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "PM8008_1_RESET_N",
+			  "WLC_INT_N",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "PM8350_OPTION", /* GPIO_10 */
+			  "NC",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "NC",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "TS_I2C_SDA", /* GPIO_20 */
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "TS_INT_N",
+			  "DISP_RESET_N",
+			  "SW_SERVICE",
+			  "DISP_ERR_FG",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "FP_INT_N",
+			  "FP_RESET_N",
+			  "NC", /* GPIO_40 */
+			  "NC",
+			  "DEBUG_GPIO0",
+			  "FORCE_USB_BOOT",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK",
+			  "FP_SPI_CS_N",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC", /* GPIO_50 */
+			  "HAP_INT_N",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "SBU_SW_OE",
+			  "SBU_SW_SEL",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "NFC_I2C_SDA", /* GPIO_60 */
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "HST_WLAN_EN",
+			  "HST_BT_EN",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX", /* GPIO_70 */
+			  "HST_BT_UART_RX",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "RF_LCD_ID_EN",
+			  "RF_ID_EXTENSION",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HALL_INT_N", /* GPIO_80 */
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_SOF_TELE",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "WCD_RST_N",
+			  "ALS_PROX_INT_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "TRAY_DET",
+			  "UDON_SWITCH_SEL",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "CAM_SOF",
+			  "RF_ID_EXTENSION_2",
+			  "RGBC_IR_INT",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "CAM_MCLK4",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "CCI_I2C0_SDA",
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL", /* GPIO_110 */
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL",
+			  "NC",
+			  "PM8008_1_IRQ",
+			  "CAM3_RESET_N",
+			  "IMU1_INT",
+			  "EXT_VD0_XVS",
+			  "NC", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET", /* GPIO_140 */
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK",
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "SM_MSS_GRFC5",
+			  "SM_MSS_GRFC6",
+			  "SM_MSS_GRFC7",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA", /* GPIO_150 */
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "HST_SW_CTRL",
+			  "DISP_VDDR_EN",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "TOF_RST_N",
+			  "QLINK0_REQ",
+			  "QLINK0_EN", /* GPIO_160 */
+			  "QLINK0_WMSS_RESET_N",
+			  "QLINK1_REQ",
+			  "QLINK1_EN",
+			  "QLINK1_WMSS_RESET_N",
+			  "PM8008_2_IRQ",
+			  "TELEC_PWR_EN",
+			  "PM8008_2_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1", /* GPIO_170 */
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "WCD_SWR_TX_DATA2",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N", /* GPIO_190 */
+			  "MAG_I2C_SDA",
+			  "MAG_I2C_SCL",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX", /* GPIO_200 */
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
new file mode 100644
index 0000000000..7ae1eb0a7c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -0,0 +1,922 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	/*
+	 * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350!
+	 * Adding it will cause the bootloader to go crazy and randomly crash
+	 * shortly after closing UEFI boot services.. Perhaps that has something
+	 * to do with the OS running inside a VM now..?
+	 */
+
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@e1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xe1000000 0 0x2300000>;
+
+			/* The display, even though it's 4K, initializes at 1080-ish p */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet
+			 */
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-google-assist {
+			label = "Google Assistant Key";
+			gpios = <&pm8350_gpios 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFTMETA>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@e1000000 {
+			reg = <0 0xe1000000 0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x100000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s11>;
+
+		/*
+		 * ARC regulators:
+		 * S5 - mx.lvl
+		 * S6 - gfx.lvl
+		 * S9 - mxc.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L8 - lcx.lvl (ARC) */
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&pm8350c_s1>;
+		vdd-l2-l8-supply = <&pm8350c_s1>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* S2 - ebi.lvl (ARC) */
+
+		pm8350c_s3: smps3 {
+			regulator-name = "pm8350c_s3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * ARC regulators:
+		 * S4 - mss.lvl
+		 * S6 - cx.lvl
+		 * S8 - mmcx.lvl
+		 */
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l11: ldo11 {
+			regulator-name = "pm8350c_l11";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+
+	/* TODO: Add pm8350b (just one ldo) once the driver part is in */
+
+	regulators-2 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1280000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <2208000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1872000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <904000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	/* Some subset of SONY IMX663 camera sensor @ 38 */
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
+};
+
+&i2c11 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	cs35l41_l: speaker-amp@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: speaker-amp@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
+	clock-frequency = <100000>;
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+	status = "okay";
+	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
+	clock-frequency = <100000>;
+
+	/* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
+};
+
+&i2c15 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c17 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
+};
+
+&pm8350_gpios {
+	gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
+			  "LCD_ID",
+			  "SDR_MMW_THERM",
+			  "RF_ID",
+			  "NC",
+			  "FP_LDO_EN",
+			  "SP_ARI_PWR_ALARM",
+			  "NC",
+			  "G_ASSIST_N",
+			  "PM8350_OPTION"; /* GPIO_10 */
+
+	g_assist_n: g-assist-n-state {
+		pins = "gpio9";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8350b_gpios {
+	snapshot_n: snapshot-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <0>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pmk8350_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "VOL_DOWN_N",
+			  "PMK8350_OPTION";
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio3";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_active>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_sleep>;
+	vmmc-supply = <&pm8350c_l9>;
+	vqmmc-supply = <&pm8350c_l6>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
+};
+
+&spi14 {
+	status = "okay";
+
+	/* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>;
+	gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+			  "APPS_I2C_0_SCL",
+			  "UWIDEC_PWR_EN",
+			  "HAP_RST_N",
+			  "NC",
+			  "NC",
+			  "PM8008_1_RESET_N",
+			  "NC",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "PM8350_OPTION", /* GPIO_10 */
+			  "NC",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "NC",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "TS_I2C_SDA", /* GPIO_20 */
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "TS_INT_N",
+			  "DISP_RESET_N",
+			  "SW_SERVICE",
+			  "DISP_ERR_FG",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "FP_INT_N",
+			  "FP_RESET_N",
+			  "NC", /* GPIO_40 */
+			  "NC",
+			  "DEBUG_GPIO0",
+			  "FORCE_USB_BOOT",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK",
+			  "FP_SPI_CS_N",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC", /* GPIO_50 */
+			  "HAP_INT_N",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "SBU_SW_OE",
+			  "SBU_SW_SEL",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "NFC_I2C_SDA", /* GPIO_60 */
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "HST_WLAN_EN",
+			  "HST_BT_EN",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX", /* GPIO_70 */
+			  "HST_BT_UART_RX",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "RF_LCD_ID_EN",
+			  "RF_ID_EXTENSION",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HALL_INT_N", /* GPIO_80 */
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_SOF_TELE",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "WCD_RST_N",
+			  "ALS_PROX_INT_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "TRAY_DET",
+			  "UDON_SWITCH_SEL",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "CAM_SOF",
+			  "RF_ID_EXTENSION_2",
+			  "RGBC_IR_INT",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "CCI_I2C0_SDA",
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL", /* GPIO_110 */
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL",
+			  "NC",
+			  "PM8008_1_IRQ",
+			  "CAM3_RESET_N",
+			  "IMU1_INT",
+			  "EXT_VD0_XVS",
+			  "NC", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET", /* GPIO_140 */
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK",
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "SM_MSS_GRFC5",
+			  "SM_MSS_GRFC6",
+			  "SM_MSS_GRFC7",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA", /* GPIO_150 */
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "HST_SW_CTRL",
+			  "DISP_VDDR_EN",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "QLINK0_REQ",
+			  "QLINK0_EN", /* GPIO_160 */
+			  "QLINK0_WMSS_RESET_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "PM8008_2_IRQ",
+			  "TELEC_PWR_EN",
+			  "PM8008_2_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1", /* GPIO_170 */
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "WCD_SWR_TX_DATA2",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N", /* GPIO_190 */
+			  "MAG_I2C_SDA",
+			  "MAG_I2C_SCL",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX", /* GPIO_200 */
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_card_det_active: sd-card-det-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_card_det_sleep: sd-card-det-sleep-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&pm8350_l6>;
+	vdda-pll-supply = <&pm8350_l1>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
new file mode 100644
index 0000000000..a7cf506f24
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -0,0 +1,4422 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/interconnect/qcom,sm8350.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+#include <dt-bindings/clock/qcom,gcc-sm8350.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sm8350.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/qcom,sm8350.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <360>;
+				exit-latency-us = <531>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8350", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>;
+		};
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			no-map;
+			reg = <0x0 0x80700000 0x0 0x160000>;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		reserved_xbl_uefi_log: memory@80880000 {
+			reg = <0x0 0x80880000 0x0 0x14000>;
+			no-map;
+		};
+
+		smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cpucp_fw_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0x4600000>;
+			no-map;
+		};
+
+		pil_camera_mem: mmeory@85200000 {
+			reg = <0x0 0x85200000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_cvp_mem: memory@85c00000 {
+			reg = <0x0 0x85c00000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2100000>;
+			no-map;
+		};
+
+		pil_slpi_mem: memory@88200000 {
+			reg = <0x0 0x88200000 0x0 0x1500000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@89700000 {
+			reg = <0x0 0x89700000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@8b500000 {
+			reg = <0x0 0x8b500000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@8b510000 {
+			reg = <0x0 0x8b510000 0x0 0xa000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@8b51a000 {
+			reg = <0x0 0x8b51a000 0x0 0x2000>;
+			no-map;
+		};
+
+		pil_spss_mem: memory@8b600000 {
+			reg = <0x0 0x8b600000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x10000000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@9b800000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x9b800000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		hyp_reserved_mem: memory@d0000000 {
+			reg = <0x0 0xd0000000 0x0 0x800000>;
+			no-map;
+		};
+
+		pil_trustedvm_mem: memory@d0800000 {
+			reg = <0x0 0xd0800000 0x0 0x76f7000>;
+			no-map;
+		};
+
+		qrtr_shbuf: memory@d7ef7000 {
+			reg = <0x0 0xd7ef7000 0x0 0x9000>;
+			no-map;
+		};
+
+		chan0_shbuf: memory@d7f00000 {
+			reg = <0x0 0xd7f00000 0x0 0x80000>;
+			no-map;
+		};
+
+		chan1_shbuf: memory@d7f80000 {
+			reg = <0x0 0xd7f80000 0x0 0x80000>;
+			no-map;
+		};
+
+		removed_mem: memory@d8800000 {
+			reg = <0x0 0xd8800000 0x0 0x6800000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8350";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk",
+				      "ufs_card_rx_symbol_0_clk",
+				      "ufs_card_rx_symbol_1_clk",
+				      "ufs_card_tx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_1_clk",
+				      "ufs_phy_tx_symbol_0_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk",
+				      "usb3_uni_phy_sec_gcc_usb30_pipe_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&ufs_mem_phy_lanes 0>,
+				 <&ufs_mem_phy_lanes 1>,
+				 <&ufs_mem_phy_lanes 2>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <0>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm8350-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xff>;
+			iommus = <&apps_smmu 0x5f6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x5e3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/* QUP no. 18 seems to be strictly SPI/UART-only */
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart18: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00900000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x5b6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x5a3 0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@98c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_default_state>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			/* QUP no. 3 seems to be strictly SPI-only */
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xff>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x43 0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10d3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x010d3000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_HWKM_CLK>;
+			clock-names = "core";
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8350-config-noc";
+			reg = <0 0x01500000 0 0xa580>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1580000 {
+			compatible = "qcom,sm8350-mc-virt";
+			reg = <0 0x01580000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8350-system-noc";
+			reg = <0 0x01680000 0 0x1c200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8350-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1f180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8350-aggre2-noc";
+			reg = <0 0x01700000 0 0x33000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8350-mmss-noc";
+			reg = <0 0x01740000 0 0x1f080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sm8350";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3",
+					  "msi4", "msi5", "msi6", "msi7";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu",
+				      "aggre1",
+				      "aggre0";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8350-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sm8350";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu",
+				      "aggre1";
+
+			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8350-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8350-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x594 0x0011>,
+				 <&apps_smmu 0x596 0x0011>;
+			/* FIXME: Probing BAM DMA causes some abort and system hang */
+			status = "fail";
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8350-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x594 0x0011>,
+				 <&apps_smmu 0x596 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+			/* FIXME: dependency BAM DMA is disabled */
+			status = "disabled";
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sm8350-ipa";
+
+			iommus = <&apps_smmu 0x5c0 0x0>,
+				 <&apps_smmu 0x5c2 0x0>;
+			reg = <0 0x01e40000 0 0x8000>,
+			      <0 0x01e50000 0 0x4b20>,
+			      <0 0x01e04000 0 0x23000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
+			reg = <0 0x033c0000 0 0x20000>,
+			      <0 0x03550000 0 0x10000>;
+
+			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 15>;
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-660.1", "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			/* note: downstream checks gpu binning for 670 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-840000000 {
+					opp-hz = /bits/ 64 <840000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+				};
+
+				opp-778000000 {
+					opp-hz = /bits/ 64 <778000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-738000000 {
+					opp-hz = /bits/ 64 <738000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-676000000 {
+					opp-hz = /bits/ 64 <676000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-608000000 {
+					opp-hz = /bits/ 64 <608000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-540000000 {
+					opp-hz = /bits/ 64 <540000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-491000000 {
+					opp-hz = /bits/ 64 <491000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-443000000 {
+					opp-hz = /bits/ 64 <443000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-379000000 {
+					opp-hz = /bits/ 64 <379000000>;
+					opp-level = <80 /* RPMH_REGULATOR_LEVEL_LOW_SVS_L1 */>;
+				};
+
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu";
+
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8350-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "bus",
+				      "iface",
+				      "ahb",
+				      "hlos1_vote_gpu_smmu",
+				      "cx_gmu",
+				      "hub_cx_int",
+				      "hub_aon";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,sm8350-lpass-ag-noc";
+			reg = <0 0x03c40000 0 0xf080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8350-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx", "mss";
+
+			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		slpi: remoteproc@5c00000 {
+			compatible = "qcom,sm8350-slpi-pas";
+			reg = <0 0x05c00000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "slpi";
+				qcom,remote-pid = <3>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0541 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0542 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0543 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8350-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_2_hsphy: phy@88e4000 {
+			compatible = "qcom,sm8250-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e4000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8350-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_2_qmpphy: phy-wrapper@88eb000 {
+			compatible = "qcom,sm8350-qmp-usb3-uni-phy";
+			reg = <0 0x088eb000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			usb_2_ssphy: phy@88ebe00 {
+				reg = <0 0x088ebe00 0 0x200>,
+				      <0 0x088ec000 0 0x200>,
+				      <0 0x088eb200 0 0x1100>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		dc_noc: interconnect@90c0000 {
+			compatible = "qcom,sm8350-dc-noc";
+			reg = <0 0x090c0000 0 0x4200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			compatible = "qcom,sm8350-gem-noc";
+			reg = <0 0x09100000 0 0xb4000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sm8350-llcc";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+		};
+
+		compute_noc: interconnect@a0c0000 {
+			compatible = "qcom,sm8350-compute-noc";
+			reg = <0 0x0a0c0000 0 0xa180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x20 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8350-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "bus", "nrt_bus", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x820 0x402>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			dpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* TODO: opp-200000000 should work with
+				 * &rpmhpd_opp_low_svs, but one some of
+				 * sm8350_hdk boards reboot using this
+				 * opp.
+				 */
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-345000000 {
+					opp-hz = /bits/ 64 <345000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-460000000 {
+					opp-hz = /bits/ 64 <460000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8350-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					<&gcc GCC_DISP_SF_AXI_CLK>,
+					<&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_CLK>,
+					<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&dpu_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-187500000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,sm8350-dsi-phy-5nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x27c>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi1_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-187500000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,sm8350-dsi-phy-5nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x27c>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8350-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8350-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,   <55 306 4>,
+					  <59 312 3>, <62 374 2>,  <64 434 2>,   <66 438 3>,
+					  <69 86 1>,  <70 520 54>, <124 609 31>, <155 63 1>,
+					  <156 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x8>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x8>; /* SROT */
+			#qcom,sensors = <14>;
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8350-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 204>;
+			wakeup-parent = <&pdc>;
+
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_uart3_default_state: qup-uart3-default-state {
+				rx-pins {
+					pins = "gpio18";
+					function = "qup3";
+				};
+				tx-pins {
+					pins = "gpio19";
+					function = "qup3";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				pins = "gpio30", "gpio31";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart18_default: qup-uart18-default-state {
+				pins = "gpio68", "gpio69";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio20", "gpio21";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio24", "gpio25";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio32", "gpio33";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio36", "gpio37";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio40", "gpio41";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio44", "gpio45";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio48", "gpio49";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio52", "gpio53";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio56", "gpio57";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio60", "gpio61";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio64", "gpio65";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio72", "gpio73";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio76", "gpio77";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8350-adsp-pas";
+			reg = <0 0x17300000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+
+							dai@0 {
+								reg = <0>;
+							};
+
+							dai@1 {
+								reg = <1>;
+							};
+
+							dai@2 {
+								reg = <2>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8350-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8350-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		cdsp: remoteproc@98900000 {
+			compatible = "qcom,sm8350-cdsp-pas";
+			reg = <0 0x98900000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		nspss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				nspss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		nspss2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				nspss2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		nspss3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				nspss3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem1-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				modem1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem2-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				modem2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem3-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				modem3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				modem4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				camera1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cam-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				camera2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
new file mode 100644
index 0000000000..bd5e8181f2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -0,0 +1,1164 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pm8450.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8450 HDK";
+	compatible = "qcom,sm8450-hdk", "qcom,sm8450";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b_1p8>;
+		vdd-rxtx-supply = <&vreg_s10b_1p8>;
+		vdd-io-supply = <&vreg_s10b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_out: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	lt9611_1v2: lt9611-vdd12-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V2";
+
+		vin-supply = <&vph_pwr>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lt9611_3v3: lt9611-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+
+		vin-supply = <&vreg_bob>;
+		gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+
+			};
+		};
+	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-tof-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 5>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-msm-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		therm1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		therm2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 6>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		usb-conn-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 7>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wide-rfc-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>;
+		vdd-l8-supply = <&vreg_s2h_0p95>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <966000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_l1b_0p91: ldo1 {
+			regulator-name = "vreg_l1b_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l5b_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p5: ldo7 {
+			regulator-name = "vreg_l7b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-name = "vreg_l4c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		vreg_s2h_0p95: smps2 {
+			regulator-name = "vreg_s2h_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s3h_0p5: smps3 {
+			regulator-name = "vreg_s3h_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <500000>;
+		};
+
+		vreg_l2h_0p91: ldo2 {
+			regulator-name = "vreg_l2h_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3h_0p91: ldo3 {
+			regulator-name = "vreg_l3h_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&vreg_s2e_0p85>;
+		vdd-l3-supply = <&vreg_s1e_1p25>;
+		vdd-l4-supply = <&vreg_s1c_1p86>;
+		vdd-l5-l6-supply = <&vreg_s1c_1p86>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		vreg_s1e_1p25: smps1 {
+			regulator-name = "vreg_s1e_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		vreg_s2e_0p85: smps2 {
+			regulator-name = "vreg_s2e_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_l1e_0p8: ldo1 {
+			regulator-name = "vreg_l1e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-name = "vreg_l4e_1p7";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-name = "vreg_l5e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l6e_1p2: ldo6 {
+			regulator-name = "vreg_l6e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l7e_2p8: ldo7 {
+			regulator-name = "vreg_l7e_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_connector_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l5b_0p88>;
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp0_out: endpoint {
+				data-lanes = <0 1>;
+				remote-endpoint = <&usb_1_qmpphy_dp_in>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+	max-link-speed = <2>;
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l2h_0p91>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pm8350_temp_alarm {
+	io-channels = <&pmk8350_vadc PM8350_ADC7_DIE_TEMP(1)>;
+	io-channel-names = "thermal";
+};
+
+&pm8350b_temp_alarm {
+	io-channels = <&pmk8350_vadc PM8350B_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmr735a_temp_alarm {
+	io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-msm-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	camera-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	therm1-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	rear-tof-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	therm2-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_GPIO3_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	usb-conn-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM5_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+	};
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@103 {
+		reg = <PM8350_ADC7_DIE_TEMP(1)>;
+		label = "pm8350_die_temp";
+	};
+
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "skin_msm_temp";
+	};
+
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "camera_temp";
+	};
+
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "therm1_temp";
+	};
+
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "wide_rfc_temp";
+	};
+
+	channel@148 {
+		reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "rear_tof_temp";
+	};
+
+	channel@14c {
+		reg = <PM8350_ADC7_GPIO3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "therm2_temp";
+	};
+
+	channel@303 {
+		reg = <PM8350B_ADC7_DIE_TEMP>;
+		label = "pm8350b_die_temp";
+	};
+
+	channel@348 {
+		reg = <PM8350B_ADC7_AMUX_THM5_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "usb_conn_temp";
+	};
+
+	channel@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		label = "pmr735a_die_temp";
+	};
+
+	channel@44a {
+		reg = <PMR735A_ADC7_GPIO1_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "qtm_w_temp";
+	};
+
+	channel@44b {
+		reg = <PMR735A_ADC7_GPIO2_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "qtm_n_temp";
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/adsp.mbn";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/cdsp.mbn";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8450/modem.mbn";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8450/slpi.mbn";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sm8450-sndcard";
+	model = "SM8450-HDK";
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"TX DMIC0", "MIC BIAS1",
+			"TX DMIC1", "MIC BIAS2",
+			"TX DMIC2", "MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_s10b_1p8>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_s10b_1p8>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <36 4>;
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio44";
+		function = "gpio";
+		bias-disable;
+	};
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio107";
+		function = "gpio";
+		output-high;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p5>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <1200000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p91>;
+
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-names = "default";
+	vdd-micb-supply = <&vreg_s10b_1p8>;
+	qcom,dmic-sample-rate = <600000>;
+
+	status = "okay";
+};
+
+&tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio1";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio43";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
new file mode 100644
index 0000000000..3747932770
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pm8450.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8450 QRD";
+	compatible = "qcom,sm8450-qrd", "qcom,sm8450";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>;
+		vdd-l8-supply = <&vreg_s2h_0p95>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_l1b_0p91: ldo1 {
+			regulator-name = "vreg_l1b_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l5b_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p5: ldo7 {
+			regulator-name = "vreg_l7b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-name = "vreg_l4c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		vreg_s2h_0p95: smps2 {
+			regulator-name = "vreg_s2h_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s3h_0p5: smps3 {
+			regulator-name = "vreg_s3h_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <500000>;
+		};
+
+		vreg_l2h_0p91: ldo2 {
+			regulator-name = "vreg_l2h_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3h_0p91: ldo3 {
+			regulator-name = "vreg_l3h_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&vreg_s2e_0p85>;
+		vdd-l3-supply = <&vreg_s1e_1p25>;
+		vdd-l4-supply = <&vreg_s1c_1p86>;
+		vdd-l5-l6-supply = <&vreg_s1c_1p86>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		vreg_s1e_1p25: smps1 {
+			regulator-name = "vreg_s1e_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		vreg_s2e_0p85: smps2 {
+			regulator-name = "vreg_s2e_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_l1e_0p8: ldo1 {
+			regulator-name = "vreg_l1e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-name = "vreg_l4e_1p7";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-name = "vreg_l5e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l6e_1p2: ldo6 {
+			regulator-name = "vreg_l6e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/adsp.mbn";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/cdsp.mbn";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8450/modem.mbn";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8450/slpi.mbn";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&spi4 {
+	status = "okay";
+};
+
+&spi18 {
+	status = "okay";
+};
+
+&spi19 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <36 4>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p5>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <1200000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p91>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
new file mode 100644
index 0000000000..daf2f91f35
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm8450-sony-xperia-nagara.dtsi"
+
+/ {
+	model = "Sony Xperia 1 IV";
+	compatible = "sony,pdx223", "qcom,sm8450";
+
+	imx316_lvdd_regulator: imx316-lvdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx316_lvdd_regulator";
+		gpio = <&pm8350b_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_pwr_ld_en>;
+	};
+
+	tcs3490_vdd_regulator: rgbcir-vdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "tcs3490_vdd_regulator";
+		gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgbc_ir_pwr_en>;
+	};
+};
+
+&pm8350b_gpios {
+	gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "CAM_PWR_LD_EN",
+			  "NC",
+			  "FOCUS_N";
+
+	cam_pwr_ld_en: cam-pwr-ld-en-state {
+		pins = "gpio6";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <0>;
+		drive-push-pull;
+		output-low;
+	};
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "WLC_ID",
+			  "WLC_TXPWR_EN",
+			  "NC",
+			  "RGBC_IR_PWR_EN",
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+
+	rgbc_ir_pwr_en: rgbc-ir-pwr-en-state {
+		pins = "gpio6";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <1>;
+		drive-push-pull;
+		output-low;
+	};
+};
+
+&tlmm {
+	gpio-line-names = "NC", /* GPIO_0 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "NC",
+			  "PM8010_1_RESET_N",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "PM8010_2_RESET_N",
+			  "DISP_ERR_FG",
+			  "HALL_INT_N",
+			  "ALS_PROX_INT_N",
+			  "IMU1_INT",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "DISP_RESET_N",
+			  "DISP_VDDR_EN",
+			  "TS_RESET_N", /* GPIO_20 */
+			  "TS_INT_N",
+			  "NC",
+			  "TELEC_PWR_EN",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK", /* GPIO_30 */
+			  "FP_SPI_CS_N",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "FP_INT_N", /* GPIO_40 */
+			  "NC",
+			  "FP_RESET_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "FORCE_USB_BOOT",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "SBU_SW_OE", /* GPIO_50 */
+			  "SBU_SW_SEL",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "GNSS_ELNA_EN0",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_70 */
+			  "NC",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "HAP_RST_N",
+			  "HAP_INT_N",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_80 */
+			  "HST_BT_EN",
+			  "HST_SW_CTRL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "HW_ID_1", /* GPIO_90 */
+			  "USB_CC_DIR",
+			  "TRAY_DET",
+			  "SW_SERVICE",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "OIS_ENABLE_WIDE",
+			  "DEBUG_GPIO0",
+			  "NC",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "TOF_RST_N",
+			  "CAM_SOF",
+			  "NC",
+			  "AFEXPTMG_TELE",
+			  "CCI_I2C0_SDA", /* GPIO_110 */
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL",
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "NC",
+			  "EXT_VD0_XVS",
+			  "CAM3_RESET_N", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RF_ID_EXTENSION_2",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "UIM1_DATA", /* GPIO_130 */
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK", /* GPIO_140 */
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "HST_AS_EN",
+			  "LAA_RX_EN",
+			  "NC",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "RF_LCD_ID_EN", /* GPIO_150 */
+			  "RF_ID_EXTENSION",
+			  "SM_MSS_GRFC12",
+			  "NFC_COLD_RST",
+			  "NC",
+			  "NC",
+			  "SDR1_QLINK0_REQ",
+			  "SDR1_QLINK0_EN",
+			  "SDR1_QLINK0_WMSS_RESET_N",
+			  "QLINK1_REQ",
+			  "QLINK1_EN", /* GPIO_160 */
+			  "QLINK1_WMSS_RESET_N",
+			  "SDR2_QLINK2_REQ",
+			  "SDR2_QLINK2_EN",
+			  "SDR2_QLINK2_WMSS_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1", /* GPIO_170 */
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "NC",
+			  "NC",
+			  "WCD_SWR_TX_DATA2",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAG_I2C_SDA", /* GPIO_190 */
+			  "MAG_I2C_SCL",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "NC", /* GPIO_200 */
+			  "OIS_ENABLE_TELE",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX",
+			  "HSTP_CLK_CFG_SEL",
+			  "NC",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
new file mode 100644
index 0000000000..dc4de2d3fe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm8450-sony-xperia-nagara.dtsi"
+
+/ {
+	model = "Sony Xperia 5 IV";
+	compatible = "sony,pdx224", "qcom,sm8450";
+
+	imx563_vdig_regulator: imx563-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx563_vdig_regulator";
+		gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&uwidec_pwr_en>;
+	};
+};
+
+&pm8350b_gpios {
+	gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "NC",
+			  "NC",
+			  "FOCUS_N";
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "WLC_ID",
+			  "WLC_TXPWR_EN",
+			  "NC",
+			  "NC", /* RGBCIR uses a PMIC vreg, so it's most likely NC. */
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+};
+
+&tlmm {
+	gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
+			  "TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */
+			  "TELE_SPI_CLK",
+			  "TELE_SPI_CS_N",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "NC",
+			  "PM8010_1_RESET_N",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "DISP_ERR_FG",
+			  "HALL_INT_N",
+			  "ALS_PROX_INT_N",
+			  "IMU1_INT",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "DISP_RESET_N",
+			  "DISP_VDDR_EN",
+			  "TS_RESET_N", /* GPIO_20 */
+			  "TS_INT_N",
+			  "UWIDEC_PWR_EN",
+			  "TELEC_PWR_EN",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK", /* GPIO_30 */
+			  "FP_SPI_CS_N",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "FP_INT_N", /* GPIO_40 */
+			  "NC",
+			  "FP_RESET_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "FORCE_USB_BOOT",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "SBU_SW_OE", /* GPIO_50 */
+			  "SBU_SW_SEL",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "GNSS_ELNA_EN0",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_70 */
+			  "NC",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "HAP_RST_N",
+			  "HAP_INT_N",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_80 */
+			  "HST_BT_EN",
+			  "HST_SW_CTRL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "HW_ID_1", /* GPIO_90 */
+			  "USB_CC_DIR",
+			  "TRAY_DET",
+			  "SW_SERVICE",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "OIS_ENABLE_WIDE",
+			  "DEBUG_GPIO0",
+			  "NC",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "NC", /* SONY didn't rename this, but there's no ToF so it's likely NC */
+			  "CAM_SOF",
+			  "NC",
+			  "AFEXPTMG_TELE",
+			  "CCI_I2C0_SDA", /* GPIO_110 */
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL",
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "NC",
+			  "EXT_VD0_XVS",
+			  "CAM3_RESET_N", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RF_ID_EXTENSION_2",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "UIM1_DATA", /* GPIO_130 */
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK", /* GPIO_140 */
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "HST_AS_EN",
+			  "LAA_RX_EN",
+			  "NC",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "RF_LCD_ID_EN", /* GPIO_150 */
+			  "RF_ID_EXTENSION",
+			  "SM_MSS_GRFC12",
+			  "NFC_COLD_RST",
+			  "NC",
+			  "NC",
+			  "SDR1_QLINK0_REQ",
+			  "SDR1_QLINK0_EN",
+			  "SDR1_QLINK0_WMSS_RESET_N",
+			  "NC",
+			  "NC", /* GPIO_160 */
+			  "NC",
+			  "SDR2_QLINK2_REQ",
+			  "SDR2_QLINK2_EN",
+			  "SDR2_QLINK2_WMSS_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1", /* GPIO_170 */
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "NC",
+			  "NC",
+			  "WCD_SWR_TX_DATA2",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAG_I2C_SDA", /* GPIO_190 */
+			  "MAG_I2C_SCL",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "NC", /* GPIO_200 */
+			  "OIS_ENABLE_TELE",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX",
+			  "HSTP_CLK_CFG_SEL",
+			  "NC",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL";
+
+	uwidec_pwr_en: uwidec-pwr-en-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
new file mode 100644
index 0000000000..001fb2723f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pm8450.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		adsp_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: memory@9fd00000 {
+			reg = <0x0 0x9fd00000 0x0 0x700000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f3300000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf3300000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x200000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+
+	/* Sadly, the voltages for these GPIO regulators are unknown. */
+	imx650_vana_regulator: imx650-vana-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx650_vana_regulator";
+		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&telec_pwr_en>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s12>;
+
+		/*
+		 * ARC regulators:
+		 * s5 - gfx.lvl
+		 * l8 - lcx.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		/*
+		 * ARC regulators:
+		 * s2 - mxc.lvl
+		 * s4 - mss.lvl
+		 * s6 - cx.lvl
+		 */
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		/*
+		 * ARC regulators:
+		 * S2 - ebi.lvl
+		 * S4 - mmcx.lvl
+		 * S6 - mx.lvl
+		 * L1 - lmx.lvl
+		 */
+
+		pm8450_s3: smps3 {
+			regulator-name = "pm8450_s3";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <600000>;
+		};
+
+		pm8450_l2: ldo2 {
+			regulator-name = "pm8450_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8450_l3: ldo3 {
+			regulator-name = "pm8450_l3";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <435000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <21 0x2008>;
+		vdd-supply = <&pm8350c_l2>;
+		avdd-supply = <&pm8350c_l3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_reset_default &ts_int_default>;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_pwr_a_cs>;
+
+		regulators {
+			slg51000_a_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c14 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	cs35l41_l: speaker-amp@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		cirrus,asp-sdout-hiz = <3>;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: speaker-amp@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		cirrus,asp-sdout-hiz = <3>;
+		#sound-dai-cells = <1>;
+	};
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c19 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&pcie0 {
+	max-link-speed = <2>;
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&pm8350_l5>;
+	vdda-pll-supply = <&pm8350_l6>;
+	status = "okay";
+};
+
+&pm8350_gpios {
+	gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
+			  "LCD_ID",
+			  "SDR_MMW_THERM",
+			  "RF_ID",
+			  "NC",
+			  "VOL_DOWN_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "PM8350_OPTION"; /* GPIO_10 */
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8350b_gpios {
+	cam_pwr_a_cs: cam-pwr-a-cs-state {
+		pins = "gpio1";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <1>;
+		drive-push-pull;
+		output-high;
+	};
+
+	snapshot_n: snapshot-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8450_gpios {
+	gpio-line-names = "FP_LDO_EN", /* GPIO_1 */
+			  "",
+			  "",
+			  "";
+};
+
+&pmk8350_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "DISP_THERM",
+			  "PMK8350_OPTION";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8450/Sony/nagara/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8450/Sony/nagara/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	firmware-name = "qcom/sm8450/Sony/nagara/slpi.mbn";
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&pm8350c_l9>;
+	vqmmc-supply = <&pm8350c_l6>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&spi10 {
+	status = "okay";
+
+	/* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>;
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	telec_pwr_en: telec-pwr-en-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&pm8350_l6>;
+	vdda-pll-supply = <&pm8350_l1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
new file mode 100644
index 0000000000..79cc8fbcd8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -0,0 +1,5224 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-sm8450.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-camcc.h>
+#include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <76800000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <800>;
+				exit-latency-us = <750>;
+				min-residency-us = <4090>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1550>;
+				min-residency-us = <4791>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <1050>;
+				exit-latency-us = <2500>;
+				min-residency-us = <5309>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2700>;
+				exit-latency-us = <3500>;
+				min-residency-us = <13959>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8450", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			#reset-cells = <1>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8450-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8450-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0xa0000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	qup_opp_table_100mhz: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_dt_log_mem: memory@80600000 {
+			reg = <0x0 0x80600000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: memory@80640000 {
+			reg = <0x0 0x80640000 0x0 0x180000>;
+			no-map;
+		};
+
+		xbl_sc_mem: memory@807c0000 {
+			reg = <0x0 0x807c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		aop_image_mem: memory@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: memory@80880000 {
+			reg = <0x0 0x80880000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: memory@808a0000 {
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: memory@808e0000 {
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: memory@808e4000 {
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+			no-map;
+		};
+
+		/* secdata region can be reused by apps */
+		smem: memory@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cpucp_fw_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0x4600000>;
+			no-map;
+		};
+
+		video_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x2100000>;
+			no-map;
+		};
+
+		slpi_mem: memory@88000000 {
+			reg = <0x0 0x88000000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@89900000 {
+			reg = <0x0 0x89900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@8b910000 {
+			reg = <0x0 0x8b910000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: memory@8b91a000 {
+			reg = <0x0 0x8b91a000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: memory@8ba00000 {
+			reg = <0x0 0x8ba00000 0x0 0x180000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: memory@8bb80000 {
+			reg = <0x0 0x8bb80000 0x0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: memory@8bbe0000 {
+			reg = <0x0 0x8bbe0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x13200000>;
+			no-map;
+		};
+
+		cvp_mem: memory@9ee00000 {
+			reg = <0x0 0x9ee00000 0x0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: memory@9f500000 {
+			reg = <0x0 0x9f500000 0x0 0x800000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@9fd00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x9fd00000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		xbl_sc_mem2: memory@a6e00000 {
+			reg = <0x0 0xa6e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		global_sync_mem: memory@a6f00000 {
+			reg = <0x0 0xa6f00000 0x0 0x100000>;
+			no-map;
+		};
+
+		/* uefi region can be reused by APPS */
+
+		/* Linux kernel image is loaded at 0xa0000000 */
+
+		oem_vm_mem: memory@bb000000 {
+			reg = <0x0 0xbb000000 0x0 0x5000000>;
+			no-map;
+		};
+
+		mte_mem: memory@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x20000000>;
+			no-map;
+		};
+
+		qheebsp_reserved_mem: memory@e0000000 {
+			reg = <0x0 0xe0000000 0x0 0x600000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: memory@e0600000 {
+			reg = <0x0 0xe0600000 0x0 0x400000>;
+			no-map;
+		};
+
+		hyp_reserved_mem: memory@e0a00000 {
+			reg = <0x0 0xe0a00000 0x0 0x100000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: memory@e0b00000 {
+			reg = <0x0 0xe0b00000 0x0 0x4af3000>;
+			no-map;
+		};
+
+		trust_ui_vm_qrtr: memory@e55f3000 {
+			reg = <0x0 0xe55f3000 0x0 0x9000>;
+			no-map;
+		};
+
+		trust_ui_vm_vblk0_ring: memory@e55fc000 {
+			reg = <0x0 0xe55fc000 0x0 0x4000>;
+			no-map;
+		};
+
+		trust_ui_vm_swiotlb: memory@e5600000 {
+			reg = <0x0 0xe5600000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: memory@e8800000 {
+			reg = <0x0 0xe8800000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: memory@e8900000 {
+			reg = <0x0 0xe8900000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: memory@e9b00000 {
+			reg = <0x0 0xe9b00000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: memory@ea000000 {
+			reg = <0x0 0xea000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		trusted_apps_ext_mem: memory@ed900000 {
+			reg = <0x0 0xed900000 0x0 0x3b00000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8450";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&pcie0_lane>,
+				 <&pcie1_lane>,
+				 <0>,
+				 <&ufs_mem_phy_lanes 0>,
+				 <&ufs_mem_phy_lanes 1>,
+				 <&ufs_mem_phy_lanes 2>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk",
+				      "pcie_1_phy_aux_clk",
+				      "ufs_phy_rx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_1_clk",
+				      "ufs_phy_tx_symbol_0_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x496 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x483 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c15: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00884000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi16: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00884000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_data_clk>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi17: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c18_data_clk>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi18: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_data_clk>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi19: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c20: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00894000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c20_data_clk>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart20: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart20_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			spi20: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c21: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00898000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c21_data_clk>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi21: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00900000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x5b6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x5a3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a98000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8450-prng-ee", "qcom,prng-ee";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sm8450-pcie0";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			/*
+			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
+			 * Hence, the IDs are swapped.
+			 */
+			msi-map = <0x0 &gic_its 0x5981 0x1>,
+				  <0x100 &gic_its 0x5980 0x1>;
+			msi-map-mask = <0xff00>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+				 <&pcie0_lane>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "aggre0",
+				      "aggre1";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_default_state>;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x200>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: phy@1c06200 {
+				reg = <0 0x01c06e00 0 0x200>, /* tx */
+				      <0 0x01c07000 0 0x200>, /* rx */
+				      <0 0x01c06200 0 0x200>, /* pcs */
+				      <0 0x01c06600 0 0x200>; /* pcs_pcie */
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sm8450-pcie1";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			/*
+			 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
+			 * Hence, the IDs are swapped.
+			 */
+			msi-map = <0x0 &gic_its 0x5a01 0x1>,
+				  <0x100 &gic_its 0x5a00 0x1>;
+			msi-map-mask = <0xff00>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+				 <&pcie1_lane>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "aggre1";
+
+			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_default_state>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0f000 {
+			compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01c0f000 0 0x200>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c0e000 {
+				reg = <0 0x01c0e000 0 0x200>, /* tx */
+				      <0 0x01c0e200 0 0x300>, /* rx */
+				      <0 0x01c0f200 0 0x200>, /* pcs */
+				      <0 0x01c0e800 0 0x200>, /* tx */
+				      <0 0x01c0ea00 0 0x300>, /* rx */
+				      <0 0x01c0f400 0 0xc00>; /* pcs_pcie */
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8450-config-noc";
+			reg = <0 0x01500000 0 0x1c000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8450-system-noc";
+			reg = <0 0x01680000 0 0x1e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8450-pcie-anoc";
+			reg = <0 0x016c0000 0 0xe280>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8450-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1c080>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8450-aggre2-noc";
+			reg = <0 0x01700000 0 0x31080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&rpmhcc RPMH_IPA_CLK>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8450-mmss-noc";
+			reg = <0 0x01740000 0 0x1f080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8450-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8450-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8450-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sm8450-slpi-pas";
+			reg = <0 0x02400000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "slpi";
+				qcom,remote-pid = <3>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0541 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0542 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0543 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
+			};
+		};
+
+		wsa2macro: codec@31e0000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x031e0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa2_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr4: soundwire-controller@31f0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x031f0000 0 0x2000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		rxmacro: codec@3200000 {
+			compatible = "qcom,sm8450-lpass-rx-macro";
+			reg = <0 0x03200000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@3210000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x03210000 0 0x2000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		txmacro: codec@3220000 {
+			compatible = "qcom,sm8450-lpass-tx-macro";
+			reg = <0 0x03220000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire-controller@3250000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x03250000 0 0x2000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire-controller@33b0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x033b0000 0 0x2000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+
+			clocks = <&txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		vamacro: codec@33f0000 {
+			compatible = "qcom,sm8450-lpass-va-macro";
+			reg = <0 0x033f0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec", "npl";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8450-adsp-pas";
+			reg = <0 0x30000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8450-cdsp-pas";
+			reg = <0 0x32300000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1021 0x1420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1022 0x1420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1023 0x1420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1024 0x1420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1025 0x1420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1026 0x1420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1027 0x1420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1028 0x1420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8450-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm8450-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		cci0: cci@ac15000 {
+			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac15000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac16000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sm8450-camcc";
+			reg = <0 0x0ade0000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8450-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			/* same path used twice */
+			interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
+					<&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x2800 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8450-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					<&gcc GCC_DISP_SF_AXI_CLK>,
+					<&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_CLK>,
+					<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-172000000 {
+						opp-hz = /bits/ 64 <172000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sm8450-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0xc00>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,sm8450-dsi-phy-5nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,sm8450-dsi-phy-5nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8450-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8450-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+					  <94 609 31>, <125 63 1>, <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x00003000>,
+			      <0 0x0c500000 0 0x00400000>,
+			      <0 0x0c440000 0 0x00080000>,
+			      <0 0x0c4c0000 0 0x00010000>,
+			      <0 0x0c42d000 0 0x00010000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		ipcc: mailbox@ed18000 {
+			compatible = "qcom,sm8450-ipcc", "qcom,ipcc";
+			reg = <0 0x0ed18000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8450-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 211>;
+			wakeup-parent = <&pdc>;
+
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clkreqn";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clkreqn";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio8", "gpio9";
+				function = "qup2";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio12", "gpio13";
+				function = "qup3";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio16", "gpio17";
+				function = "qup4";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio206", "gpio207";
+				function = "qup5";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio20", "gpio21";
+				function = "qup6";
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				pins = "gpio28", "gpio29";
+				function = "qup8";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				pins = "gpio32", "gpio33";
+				function = "qup9";
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				pins = "gpio36", "gpio37";
+				function = "qup10";
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				pins = "gpio40", "gpio41";
+				function = "qup11";
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				pins = "gpio44", "gpio45";
+				function = "qup12";
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				pins = "gpio48", "gpio49";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				pins = "gpio52", "gpio53";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				pins = "gpio56", "gpio57";
+				function = "qup15";
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				pins = "gpio60", "gpio61";
+				function = "qup16";
+			};
+
+			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+				pins = "gpio64", "gpio65";
+				function = "qup17";
+			};
+
+			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+				pins = "gpio68", "gpio69";
+				function = "qup18";
+			};
+
+			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+				pins = "gpio72", "gpio73";
+				function = "qup19";
+			};
+
+			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+				pins = "gpio76", "gpio77";
+				function = "qup20";
+			};
+
+			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+				pins = "gpio80", "gpio81";
+				function = "qup21";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup0";
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup1";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup1";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup2";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup3";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup3";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup4";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio85";
+				function = "qup5";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio206", "gpio207", "gpio84";
+				function = "qup5";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio23";
+				function = "qup6";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup6";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio31";
+				function = "qup8";
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				pins = "gpio28", "gpio29", "gpio30";
+				function = "qup8";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio35";
+				function = "qup9";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup9";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio39";
+				function = "qup10";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup10";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio43";
+				function = "qup11";
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup11";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio47";
+				function = "qup12";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup12";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio51";
+				function = "qup13";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup13";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio55";
+				function = "qup14";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup14";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio59";
+				function = "qup15";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup15";
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio63";
+				function = "qup16";
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup16";
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio67";
+				function = "qup17";
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup17";
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio71";
+				function = "qup18";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup18";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio75";
+				function = "qup19";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				pins = "gpio72", "gpio73", "gpio74";
+				function = "qup19";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_cs: qup-spi20-cs-state {
+				pins = "gpio79";
+				function = "qup20";
+			};
+
+			qup_spi20_data_clk: qup-spi20-data-clk-state {
+				pins = "gpio76", "gpio77", "gpio78";
+				function = "qup20";
+			};
+
+			qup_spi21_cs: qup-spi21-cs-state {
+				pins = "gpio83";
+				function = "qup21";
+			};
+
+			qup_spi21_data_clk: qup-spi21-data-clk-state {
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup21";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio26";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio27";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart20_default: qup-uart20-default-state {
+				pins = "gpio76", "gpio77", "gpio78", "gpio79";
+				function = "qup20";
+			};
+		};
+
+		lpass_tlmm: pinctrl@3440000 {
+			compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+			reg = <0 0x03440000 0x0 0x20000>,
+			      <0 0x034d0000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		sram@146aa000 {
+			compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
+			reg = <0 0x146aa000 0 0x1000>;
+			ranges = <0 0 0x146aa000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x0 0x17100000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17180000 0x0 0x200000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x17140000 0x0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17421000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+			};
+
+			frame@17423000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17423000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17425000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17427000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17429000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x1742b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x1742d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>,
+			      <0x0 0x17a30000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
+					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8450-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8450-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp12 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp13 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp14 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sm8450-gem-noc";
+			reg = <0 0x19100000 0 0xbb800>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@19200000 {
+			compatible = "qcom,sm8450-llcc";
+			reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
+			      <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
+			      <0 0x19a00000 0 0x80000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8450-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref", "ref_aux", "qref";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_0_CLKREF_EN>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8450-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x584 0x11>,
+				 <&apps_smmu 0x588 0x0>,
+				 <&apps_smmu 0x598 0x5>,
+				 <&apps_smmu 0x59a 0x0>,
+				 <&apps_smmu 0x59f 0x0>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x584 0x11>,
+				 <&apps_smmu 0x588 0x0>,
+				 <&apps_smmu 0x598 0x5>,
+				 <&apps_smmu 0x59a 0x0>,
+				 <&apps_smmu 0x59f 0x0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+			dma-coherent;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0x0>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_0_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8450-nsp-noc";
+			reg = <0 0x320c0000 0 0x10000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,sm8450-lpass-ag-noc";
+			reg = <0 0x03c40000 0 0x17200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu7_middle_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_middle_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_middle_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu0_tj_cfg: tj-cfg {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu1_tj_cfg: tj-cfg {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cdsp0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp_0_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp_1_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp_2_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				ddr_config0: ddr0-config {
+					temperature = <90000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss0_config0: mdmss0-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss0_config1: mdmss0-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss1_config0: mdmss1-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss1_config1: mdmss1-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss2_config0: mdmss2-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss2_config1: mdmss2-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss3_config0: mdmss3-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss3_config1: mdmss3-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
new file mode 100644
index 0000000000..f29cce5186
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -0,0 +1,862 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8550 MTP";
+	compatible = "qcom,sm8550-mtp", "qcom,sm8550";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8550-MTP";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC2", "MIC BIAS3",
+				"TX DMIC0", "MIC BIAS1",
+				"TX DMIC1", "MIC BIAS2",
+				"TX DMIC2", "MIC BIAS3",
+				"TX SWR_ADC1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p3>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p3>;
+		vdd-l12-supply = <&vreg_s6g_1p8>;
+		vdd-l15-supply = <&vreg_s6g_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l3-supply = <&vreg_s4e_0p9>;
+
+		vreg_l3c_0p91: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s4e_0p9>;
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l1-supply = <&vreg_s4e_0p9>;
+		vdd-l2-supply = <&vreg_s4e_0p9>;
+		vdd-l3-supply = <&vreg_s4g_1p3>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s4e_0p9: smps4 {
+			regulator-name = "vreg_s4e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p1: smps5 {
+			regulator-name = "vreg_s5e_1p1";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s4e_0p9>;
+		vdd-l2-supply = <&vreg_s4e_0p9>;
+		vdd-l3-supply = <&vreg_s4e_0p9>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p91: ldo3 {
+			regulator-name = "vreg_l3f_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vdd-l1-supply = <&vreg_s4g_1p3>;
+		vdd-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-supply = <&vreg_s4g_1p3>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vreg_s1g_1p2: smps1 {
+			regulator-name = "vreg_s1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p8: smps2 {
+			regulator-name = "vreg_s2g_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p7: smps3 {
+			regulator-name = "vreg_s3g_0p7";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p3: smps4 {
+			regulator-name = "vreg_s4g_1p3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p8: smps5 {
+			regulator-name = "vreg_s5g_0p8";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p8: smps6 {
+			regulator-name = "vreg_s6g_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p2: ldo2 {
+			regulator-name = "vreg_l2g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
+		pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3c_0p91>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l1e_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		input-enable;
+		output-disable;
+		bias-pull-up;
+		power-source = <1>; /* 1.8 V */
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/adsp.mbn",
+			"qcom/sm8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/cdsp.mbn",
+			"qcom/sm8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8550/modem.mbn",
+			"qcom/sm8550/modem_dtb.mbn";
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845 */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3g_1p2>;
+	};
+
+	/* WSA8845 */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3g_1p2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active: sde-te-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_suspend: sde-te-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio108";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vccq2-supply = <&vreg_l3g_1p2>;
+	vccq2-max-microamp = <100>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p91>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
new file mode 100644
index 0000000000..2c09ce8aea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -0,0 +1,954 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8550 QRD";
+	compatible = "qcom,sm8550-qrd", "qcom,sm8550";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8550-QRD";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC2", "MIC BIAS3",
+				"TX DMIC0", "MIC BIAS1",
+				"TX DMIC1", "MIC BIAS2",
+				"TX DMIC2", "MIC BIAS3",
+				"TX SWR_ADC1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p25>;
+		vdd-l12-supply = <&vreg_s6g_1p86>;
+		vdd-l15-supply = <&vreg_s6g_1p86>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo2 supplies SM8550 VDD_LPI_MX */
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s4e_0p95: smps4 {
+			regulator-name = "vreg_s4e_0p95";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p08: smps5 {
+			regulator-name = "vreg_s5e_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p88: ldo3 {
+			regulator-name = "vreg_l3f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vreg_s1g_1p25: smps1 {
+			regulator-name = "vreg_s1g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p85: smps2 {
+			regulator-name = "vreg_s2g_0p85";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p8: smps3 {
+			regulator-name = "vreg_s3g_0p8";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p25: smps4 {
+			regulator-name = "vreg_s4g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p85: smps5 {
+			regulator-name = "vreg_s5g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p86: smps6 {
+			regulator-name = "vreg_s6g_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-retimer@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_l15b_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					data-lanes = <3 2 1 0>;
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&gcc {
+	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
+		 <&pcie0_phy>,
+		 <&pcie1_phy>,
+		 <0>,
+		 <&ufs_mem_phy 0>,
+		 <&ufs_mem_phy 1>,
+		 <&ufs_mem_phy 2>,
+		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
+		pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+		vddio-supply = <&vreg_l12b_1p8>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
+&pcie_1_phy_aux_clk {
+	status = "disabled";
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/adsp.mbn",
+			"qcom/sm8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/cdsp.mbn",
+			"qcom/sm8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8550/modem.mbn",
+			"qcom/sm8550/modem_dtb.mbn";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker North */
+	north_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3g_1p2>;
+	};
+
+	/* WSA8845, Speaker South */
+	south_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3g_1p2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active: sde-te-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_suspend: sde-te-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio108";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vccq2-supply = <&vreg_l3g_1p2>;
+	vccq2-max-microamp = <100>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
new file mode 100644
index 0000000000..3a228d4f0c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -0,0 +1,5319 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/clock/qcom,sm8550-gcc.h>
+#include <dt-bindings/clock/qcom,sm8550-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8550-tcsr.h>
+#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0 0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a715";
+			reg = <0 0x300>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <270>;
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a715";
+			reg = <0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <270>;
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <270>;
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <270>;
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x3";
+			reg = <0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <588>;
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "goldplus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8550", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8550-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8550-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&PRIME_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp-region@80000000 {
+			reg = <0 0x80000000 0 0xa00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm-region@80a00000 {
+			reg = <0 0x80a00000 0 0x400000>;
+			no-map;
+		};
+
+		hyp_tags_mem: hyp-tags-region@80e00000 {
+			reg = <0 0x80e00000 0 0x3d0000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc-region@d8100000 {
+			reg = <0 0xd8100000 0 0x40000>;
+			no-map;
+		};
+
+		hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
+			reg = <0 0x811d0000 0 0x30000>;
+			no-map;
+		};
+
+		/* merged xbl_dt_log, xbl_ramdump, aop_image */
+		xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		/* merged aop_config, tme_crash_dump, tme_log, uefi_log */
+		aop_config_merged_mem: aop-config-merged-region@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		/* secdata region can be reused by apps */
+		smem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi-region@81f00000 {
+			reg = <0 0x81f00000 0 0x20000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync-region@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat-region@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap-region@82800000 {
+			reg = <0 0x82800000 0 0x4600000>;
+			no-map;
+		};
+
+		mpss_mem: mpss-region@8a800000 {
+			reg = <0 0x8a800000 0 0x10800000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
+			reg = <0 0x9b000000 0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw-region@9b080000 {
+			reg = <0 0x9b080000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi-region@9b090000 {
+			reg = <0 0x9b090000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
+			reg = <0 0x9b09a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@9b100000 {
+			reg = <0 0x9b100000 0 0x180000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared-region@9b280000 {
+			reg = <0 0x9b280000 0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared-region@9b2e0000 {
+			reg = <0 0x9b2e0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@9b300000 {
+			reg = <0 0x9b300000 0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video-region@9bb00000 {
+			reg = <0 0x9bb00000 0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@9c200000 {
+			reg = <0 0x9c200000 0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@9c900000 {
+			reg = <0 0x9c900000 0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
+			reg = <0 0x9e900000 0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
+			reg = <0 0x9e980000 0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi-region@9ea00000 {
+			reg = <0 0x9ea00000 0 0x4080000>;
+			no-map;
+		};
+
+		/* uefi region can be reused by apps */
+
+		/* Linux kernel image is loaded at 0xa8000000 */
+
+		rmtfs_mem: rmtfs-region@d4a80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xd4a80000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		mpss_dsm_mem: mpss-dsm-region@d4d00000 {
+			reg = <0 0xd4d00000 0 0x3300000>;
+			no-map;
+		};
+
+		tz_reserved_mem: tz-reserved-region@d8000000 {
+			reg = <0 0xd8000000 0 0x100000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw-region@d8140000 {
+			reg = <0 0xd8140000 0 0x1c0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee-region@d8300000 {
+			reg = <0 0xd8300000 0 0x500000>;
+			no-map;
+		};
+
+		ta_mem: ta-region@d8800000 {
+			reg = <0 0xd8800000 0 0x8a00000>;
+			no-map;
+		};
+
+		tz_tags_mem: tz-tags-region@e1200000 {
+			reg = <0 0xe1200000 0 0x2740000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+			reg = <0 0xe6440000 0 0x279000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm-region@f3600000 {
+			reg = <0 0xf3600000 0 0x4aee000>;
+			no-map;
+		};
+
+		trust_ui_vm_dump: trust-ui-vm-dump-region@f80ee000 {
+			reg = <0 0xf80ee000 0 0x1000>;
+			no-map;
+		};
+
+		trust_ui_vm_qrtr: trust-ui-vm-qrt-region@f80ef000 {
+			reg = <0 0xf80ef000 0 0x9000>;
+			no-map;
+		};
+
+		trust_ui_vm_vblk0_ring: trust-ui-vm-vblk0-ring-region@f80f8000 {
+			reg = <0 0xf80f8000 0 0x4000>;
+			no-map;
+		};
+
+		trust_ui_vm_vblk1_ring: trust-ui-vm-vblk1-ring-region@f80fc000 {
+			reg = <0 0xf80fc000 0 0x4000>;
+			no-map;
+		};
+
+		trust_ui_vm_swiotlb: trust-ui-vm-swiotlb-region@f8100000 {
+			reg = <0 0xf8100000 0 0x100000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm-region@f8400000 {
+			reg = <0 0xf8400000 0 0x4800000>;
+			no-map;
+		};
+
+		oem_vm_vblk0_ring: oem-vm-vblk0-ring-region@fcc00000 {
+			reg = <0 0xfcc00000 0 0x4000>;
+			no-map;
+		};
+
+		oem_vm_swiotlb: oem-vm-swiotlb-region@fcc04000 {
+			reg = <0 0xfcc04000 0 0x100000>;
+			no-map;
+		};
+
+		hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
+			reg = <0 0xfce00000 0 0x2900000>;
+			no-map;
+		};
+
+		hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
+			reg = <0 0xff700000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8550-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&bi_tcxo_div2>, <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie_1_phy_aux_clk>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			iommus = <&apps_smmu 0x436 0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x423 0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "s-ahb";
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a0000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a4000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x1e>;
+			iommus = <&apps_smmu 0xb6 0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xa3 0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart7: serial@a9c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_default>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8550-cnoc-main";
+			reg = <0 0x01500000 0 0x13080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8550-config-noc";
+			reg = <0 0x01600000 0 0x6200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8550-system-noc";
+			reg = <0 0x01680000 0 0x1d080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8550-pcie-anoc";
+			reg = <0 0x016c0000 0 0x12200>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8550-aggre1-noc";
+			reg = <0 0x016e0000 0 0x14400>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8550-aggre2-noc";
+			reg = <0 0x01700000 0 0x1e400>;
+			#interconnect-cells = <2>;
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8550-mmss-noc";
+			reg = <0 0x01780000 0 0x5b800>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8550";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8550";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1480 0x1>,
+				    <0x100 &apps_smmu 0x1481 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				<&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci", "link_down";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy", "phy_nocsr";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x480 0x0>,
+				 <&apps_smmu 0x481 0x0>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x480 0x0>,
+				 <&apps_smmu 0x481 0x0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8550-qmp-ufs-phy";
+			reg = <0x0 0x01d80000 0x0 0x2000>;
+			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<100000000 403000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8550-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sm8550-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0x30000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8550-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8550-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx", "mss";
+
+			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa2_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire-controller@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <10>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire-controller@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire-controller@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8550-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>,
+			      <0 0x07250000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8550-lpass-lpiaon-noc";
+			reg = <0 0x07400000 0 0x19080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,sm8550-lpass-lpicx-noc";
+			reg = <0 0x07430000 0 0x3a200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8550-lpass-ag-noc";
+			reg = <0 0x07e40000 0 0xe080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x540 0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			bus-width = <4>;
+			dma-coherent;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm8550-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8550-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+					<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x1c00 0x2>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8550-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sm8550-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0xc00>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sm8550-dsi-phy-4nm";
+				reg = <0 0x0ae95000 0 0x200>,
+				      <0 0x0ae95200 0 0x280>,
+				      <0 0x0ae95500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sm8550-dsi-phy-4nm";
+				reg = <0 0x0ae97000 0 0x200>,
+				      <0 0x0ae97200 0 0x280>,
+				      <0 0x0ae97500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8550-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x088e3000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8550-qmp-usb3-dp-phy";
+			reg = <0x0 0x088e8000 0x0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x40 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,usb3_lpm_capable;
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8550-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>,
+					  <138 251 5>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c271000 {
+			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c271000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c272000 {
+			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c272000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c273000 {
+			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c273000 0 0x1000>, /* TM */
+			      <0 0x0c224000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8550-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 211>;
+			wakeup-parent = <&pdc>;
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio18", "gpio19";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio22", "gpio23";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio6", "gpio7";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio10", "gpio11";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio84", "gpio85";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio28", "gpio29";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				scl-pins {
+					pins = "gpio57";
+					function = "qup2_se0_l1_mira";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				sda-pins {
+					pins = "gpio56";
+					function = "qup2_se0_l0_mira";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio60", "gpio61";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio2", "gpio3";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio106";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio31";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio28", "gpio29", "gpio30";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio35";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio39";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio43";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio47";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio51";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio59";
+				function = "qup2_se0_l3_mira";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup2_se0_l2_mira";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio63";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio67";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio71";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio119";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio2", "gpio3", "gpio118";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio83";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio75";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio72", "gpio106", "gpio74";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
+			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
+			ranges;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x40000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17140000 0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>,
+			      <0 0x17a30000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8550-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8550-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		pmu@24091000 {
+			compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x24091000 0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <7980000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <12157000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <14060000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <16113000>;
+				};
+			};
+		};
+
+		pmu@240b6400 {
+			compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b6400 0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8550-gem-noc";
+			reg = <0 0x24100000 0 0xbb800>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sm8550-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x30000000 0x0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1063 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1066 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+							 <&apps_smmu 0x1067 0x0>;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8550-nsp-noc";
+			reg = <0 0x320c0000 0 0xe080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8550-cdsp-pas";
+			reg = <0x0 0x32300000 0x0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx", "mxc", "nsp";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1961 0x0>,
+							 <&apps_smmu 0x0c01 0x20>,
+							 <&apps_smmu 0x19c1 0x10>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x19c2 0x10>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c03 0x20>,
+							 <&apps_smmu 0x19c3 0x10>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c04 0x20>,
+							 <&apps_smmu 0x19c4 0x10>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c05 0x20>,
+							 <&apps_smmu 0x19c5 0x10>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x19c6 0x10>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c07 0x20>,
+							 <&apps_smmu 0x19c7 0x10>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x19c8 0x10>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu3-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu3_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu3_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_middle_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_middle_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_middle_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cdsp0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp0_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp1_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp2_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp3_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				ddr_config0: ddr0-config {
+					temperature = <90000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss0_config0: mdmss0-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss0_config1: mdmss0-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss1_config0: mdmss1-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss1_config1: mdmss1-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss2_config0: mdmss2-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss2_config1: mdmss2-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss3_config0: mdmss3-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss3_config1: mdmss3-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu0_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu1_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu2_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu3_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu4_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu5_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-6-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu6_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-7-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu7_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile
new file mode 100644
index 0000000000..ef8d8fcbaa
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1293-ds418j.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-xnano-x5.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-bpi-m4.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-lionskin.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1619-mjolnir.dtb
diff --git a/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts
new file mode 100644
index 0000000000..b2e44c6c2d
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1293.dtsi"
+
+/ {
+	compatible = "synology,ds418j", "realtek,rtd1293";
+	model = "Synology DiskStation DS418j";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x3ffe1000>; /* boot ROM to 1 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi
new file mode 100644
index 0000000000..d0c9387ac1
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1293 SoC
+ *
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+#include "rtd129x.dtsi"
+
+/ {
+	compatible = "realtek,rtd1293";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&arm_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>;
+};
+
+&gic {
+	interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts b/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts
new file mode 100644
index 0000000000..cf4a57c012
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "rtd1295.dtsi"
+
+/ {
+	compatible = "mele,v9", "realtek,rtd1295";
+	model = "MeLE V9";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts b/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts
new file mode 100644
index 0000000000..14161c3f30
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "rtd1295.dtsi"
+
+/ {
+	compatible = "probox2,ava", "realtek,rtd1295";
+	model = "PROBOX2 AVA";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts b/arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts
new file mode 100644
index 0000000000..d7878ff942
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1295.dtsi"
+
+/ {
+	compatible = "xnano,x5", "realtek,rtd1295";
+	model = "Xnano X5";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x3ffe1000>; /* boot ROM to 1 GiB or 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
new file mode 100644
index 0000000000..4beb37bb95
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1295.dtsi"
+
+/ {
+	compatible = "zidoo,x9s", "realtek,rtd1295";
+	model = "Zidoo X9S";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
new file mode 100644
index 0000000000..b7f63102f2
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1295 SoC
+ *
+ * Copyright (c) 2016-2019 Andreas Färber
+ */
+
+#include "rtd129x.dtsi"
+
+/ {
+	compatible = "realtek,rtd1295";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&arm_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts
new file mode 100644
index 0000000000..cc706d13da
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1296.dtsi"
+
+/ {
+	compatible = "synology,ds418", "realtek,rtd1296";
+	model = "Synology DiskStation DS418";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
new file mode 100644
index 0000000000..4f805f576c
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1296 SoC
+ *
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+#include "rtd129x.dtsi"
+
+/ {
+	compatible = "realtek,rtd1296";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&arm_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
new file mode 100644
index 0000000000..39aefe66a7
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1293/RTD1295/RTD1296 SoC
+ *
+ * Copyright (c) 2016-2019 Andreas Färber
+ */
+
+/memreserve/	0x0000000000000000 0x000000000001f000;
+/memreserve/	0x000000000001f000 0x00000000000e1000;
+/memreserve/	0x0000000001b00000 0x00000000004be000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1295.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@1f000 {
+			reg = <0x1f000 0x1000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x1ffe000 0x4000>;
+		};
+
+		tee: tee@10100000 {
+			reg = <0x10100000 0xf00000>;
+			no-map;
+		};
+	};
+
+	arm_pmu: arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0001f000>, /* boot ROM */
+			 /* Exclude up to 2 GiB of RAM */
+			 <0x80000000 0x80000000 0x80000000>;
+
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1800>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1800>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x2000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x2000>;
+			};
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,gic-400";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset4: reset-controller@50 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x50 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <27000000>;
+		resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR1>;
+		status = "disabled";
+	};
+
+	uart2: serial@400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x400 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts b/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
new file mode 100644
index 0000000000..9891967d13
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1395.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m4", "realtek,rtd1395";
+	model = "Banana Pi BPI-M4";
+
+	memory@2f000 {
+		device_type = "memory";
+		reg = <0x2f000 0x3ffd1000>; /* boot ROM to 1 GiB or 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts b/arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts
new file mode 100644
index 0000000000..83f9b536cd
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1395.dtsi"
+
+/ {
+	compatible = "realtek,lion-skin", "realtek,rtd1395";
+	model = "Realtek Lion Skin EVB";
+
+	memory@2f000 {
+		device_type = "memory";
+		reg = <0x2f000 0x3ffd1000>; /* boot ROM to 1 GiB or 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* debug console (J1) */
+&uart0 {
+	status = "okay";
+};
+
+/* M.2 slot (CON1) */
+&uart1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395.dtsi b/arch/arm64/boot/dts/realtek/rtd1395.dtsi
new file mode 100644
index 0000000000..2efe5b25c8
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1395 SoC
+ *
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+#include "rtd139x.dtsi"
+
+/ {
+	compatible = "realtek,rtd1395";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&arm_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
new file mode 100644
index 0000000000..a3c10ceeb5
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1395 SoC family
+ *
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/memreserve/	0x0000000000000000 0x000000000002f000;
+/memreserve/	0x000000000002f000 0x00000000000d1000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1295.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@2f000 {
+			reg = <0x2f000 0x1000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x1ffe000 0x4000>;
+		};
+
+		tee: tee@10100000 {
+			reg = <0x10100000 0xf00000>;
+			no-map;
+		};
+	};
+
+	arm_pmu: arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0001f000>, /* boot ROM */
+			 <0x98000000 0x98000000 0x68000000>;
+
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x2000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x2000>;
+			};
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,gic-400";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset4: reset-controller@50 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x50 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <27000000>;
+		resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR1>;
+		status = "disabled";
+	};
+
+	uart2: serial@400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x400 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
new file mode 100644
index 0000000000..90ed668146
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1619.dtsi"
+
+/ {
+	compatible = "realtek,mjolnir", "realtek,rtd1619";
+	model = "Realtek Mjolnir EVB";
+
+	memory@2e000 {
+		device_type = "memory";
+		reg = <0x2e000 0x7ffd2000>; /* boot ROM to 2 GiB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+};
+
+/* debug console (J1) */
+&uart0 {
+	status = "okay";
+};
+
+/* M.2 slot (CON4) */
+&uart1 {
+	status = "disabled";
+};
+
+/* GPIO connector (T1) */
+&uart2 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1619.dtsi b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
new file mode 100644
index 0000000000..e52bf708b0
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1619 SoC
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+#include "rtd16xx.dtsi"
+
+/ {
+	compatible = "realtek,rtd1619";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
new file mode 100644
index 0000000000..34802cc629
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD16xx SoC family
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@2f000 {
+			reg = <0x2f000 0x1000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x1ffe000 0x4000>;
+		};
+
+		tee: tee@10100000 {
+			reg = <0x10100000 0xf00000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			next-level-cache = <&l3>;
+			cache-level = <2>;
+			cache-unified;
+
+		};
+
+		l3: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	arm_pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>,
+			<&cpu3>, <&cpu4>, <&cpu5>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "osc27M";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0002e000>, /* boot ROM */
+			 <0x98000000 0x98000000 0x68000000>;
+
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x1000>;
+			};
+		};
+
+		gic: interrupt-controller@ff100000 {
+			compatible = "arm,gic-v3";
+			reg = <0xff100000 0x10000>,
+			      <0xff140000 0xc0000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&iso {
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <432000000>;
+		status = "disabled";
+	};
+
+	uart2: serial@400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x400 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <432000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
new file mode 100644
index 0000000000..7114cbbd87
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-beacon-rzg2m-kit.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-mipi-2.1.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
+
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-beacon-rzg2n-kit.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-mipi-2.1.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb
+
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb
+
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-beacon-rzg2h-kit.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb
+
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb
+dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-v3msk.dtb
+
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980a-condor-i.dtb
+
+dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
+
+dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
+
+dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
+
+dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb
+
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtbo
+
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
+
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo
+
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo
+
+dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtbo
+
+dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
+
+dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
diff --git a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
new file mode 100644
index 0000000000..7cb5c958ae
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the AISTARVISION MIPI Adapter V2.1
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/ {
+	ov5645_vdddo_1v8: 1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdddo";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vdda_2v8: 2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdda";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vddd_1v5: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	imx219_vana_2v8: 2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vana";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	imx219_vdig_1v8: 1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdig";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	imx219_vddl_1v2: 1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddl";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	osc25250_clk: osc25250_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&MIPI_OV5645_PARENT_I2C {
+	ov5645: ov5645@3c {
+		compatible = "ovti,ov5645";
+		reg = <0x3c>;
+		clocks = <&osc25250_clk>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&ov5645_vdddo_1v8>;
+		vdda-supply = <&ov5645_vdda_2v8>;
+		vddd-supply = <&ov5645_vddd_1v5>;
+
+		port {
+			ov5645_ep: endpoint {
+			};
+		};
+	};
+};
+
+&MIPI_IMX219_PARENT_I2C {
+	imx219: imx219@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&osc25250_clk>;
+		VANA-supply = <&imx219_vana_2v8>;
+		VDIG-supply = <&imx219_vdig_1v8>;
+		VDDL-supply = <&imx219_vddl_1v2>;
+
+		port {
+			imx219_ep: endpoint {
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
new file mode 100644
index 0000000000..2e9927b977
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -0,0 +1,816 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/versaclock.h>
+
+/ {
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm2 0 25000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	backlight_dpi: backlight-dpi {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm0 0 25000>;
+		brightness-levels = <0 25 33 50 63 75 88 100>;
+		default-brightness-level = <6>;
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-1 { /* S19 */
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			label = "Up";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 { /*S20 */
+			gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+			label = "Left";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 { /* S21 */
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			label = "Down";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 { /* S22 */
+			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+			label = "Right";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-5 { /* S23 */
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			label = "Center";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led0 {
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			label = "LED0";
+			linux,default-trigger = "heartbeat";
+		};
+		led1 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			label = "LED1";
+		};
+		led2 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			label = "LED2";
+		};
+		led3 {
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+	};
+
+	lvds {
+		compatible = "panel-lvds";
+		power-supply = <&reg_lcd_reset>;
+		width-mm = <223>;
+		height-mm = <125>;
+		backlight = <&backlight_lvds>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 800x480@60Hz */
+			clock-frequency = <30000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hsync-len = <48>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vfront-porch = <13>;
+			vback-porch = <29>;
+			vsync-len = <1>;
+			hsync-active = <1>;
+			vsync-active = <3>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	rgb {
+		/* Different LCD with compatible timings */
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_dpi>;
+		enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_lcd>;
+		port {
+			rgb_panel: endpoint {
+				remote-endpoint = <&du_out_rgb>;
+			};
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "nLCD_RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd>;
+	};
+
+	reg_cam0: regulator-cam0 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_cam1: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+	};
+
+	sound_card {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+		dais = <&rsnd_port0>, <&rsnd_port1>;
+		widgets = "Microphone", "Mic Jack",
+			  "Line", "Line In Jack",
+			  "Headphone", "Headphone Jack";
+		mic-det-gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		routing = "Headphone Jack", "HPOUTL",
+			 "Headphone Jack", "HPOUTR",
+			 "IN3R", "MICBIAS",
+			 "Mic Jack", "IN3R";
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	/* External DU dot clocks */
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+};
+
+&audio_clk_b {
+	clock-frequency = <22579200>;
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&du {
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&rgb_panel>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
+};
+
+&ehci1 {
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
+};
+
+&hdmi0 {
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dw_hdmi0_in: endpoint {
+				remote-endpoint = <&du_out_hdmi0>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	gpio_exp2: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp3: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp4: gpio@23 {
+		compatible = "onnn,pca9654";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	versaclock6_bb: clock-controller@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+
+		assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>,
+				  <&versaclock6_bb 3>, <&versaclock6_bb 4>;
+		assigned-clock-rates = <24000000>, <24000000>, <24576000>,
+				       <24576000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&versaclock6_bb 3>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:Default */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:Default */
+			0x0000 /* 5:Default */
+		>;
+		port {
+			wm8962_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint0>;
+			};
+		};
+	};
+
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		wakeup-source;
+	};
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+
+	gpio_exp1: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select",
+				  "backlight-enable", "Touch_shdwn",
+				  "LCD_H_pol", "lcd_V_pol";
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
+		function = "du";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	i2c5_pins: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	led_pins: leds {
+		/* GP_0_4 , AVS1, AVS2, GP_7_3 */
+		pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
+		bias-pull-down;
+	};
+
+	msiof1_pins: msiof1 {
+		groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
+		function = "msiof1";
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+
+	pwm2_pins: pwm2 {
+		groups = "pwm2_a";
+		function = "pwm2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		mux {
+			groups = "usb0";
+			function = "usb0";
+		};
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+	};
+
+	usb30_pins: usb30 {
+		mux {
+			groups = "usb30";
+			function = "usb30";
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	/* Reference versaclock instead of audio_clk_a */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&versaclock6_bb 4>, <&audio_clk_b>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_endpoint0: endpoint {
+				remote-endpoint = <&wm8962_endpoint>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint0>;
+				frame-master = <&rsnd_endpoint0>;
+
+				playback = <&ssi1>, <&dvc1>, <&src1>;
+				capture = <&ssi0>;
+			};
+		};
+		rsnd_port1: port@1 {
+		    reg = <0x01>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif5 {
+	pinctrl-0 = <&scif5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&tmu1 {
+	status = "okay";
+};
+
+&tmu2 {
+	status = "okay";
+};
+
+&tmu3 {
+	status = "okay";
+};
+
+&tmu4 {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&vin0 {
+	status = "okay";
+};
+&vin1 {
+	status = "okay";
+};
+&vin2 {
+	status = "okay";
+};
+&vin3 {
+	status = "okay";
+};
+&vin4 {
+	status = "okay";
+};
+&vin5 {
+	status = "okay";
+};
+&vin6 {
+	status = "okay";
+};
+&vin7 {
+	status = "okay";
+};
+
+&xhci0
+{
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
new file mode 100644
index 0000000000..68b04e56ae
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/versaclock.h>
+
+/ {
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	osc_32k: osc_32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wlan_pwrseq: wlan_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
+	clocks = <&cpg CPG_MOD 812>, <&versaclock5 4>;
+	clock-names = "fck", "refclk";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb-hub-reset-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		clock-names = "extclk";
+		max-speed = <4000000>;
+	};
+};
+
+&hscif2 {
+	status = "okay";
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pca9654: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_20_0",
+			"wl_reg_on",
+			"bt_reg_on",
+			"i2c4_20_3",
+			"i2c4_20_4",
+			"bt_dev_wake",
+			"i2c4_20_6",
+			"i2c4_20_7";
+	};
+
+	pca9654_lte: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_21_0",
+			"zoe_pwr_on",
+			"zoe_extint",
+			"zoe_reset_n",
+			"sara_reset",
+			"i2c4_21_5",
+			"sara_pwr_off",
+			"sara_networking_status";
+	};
+
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+
+	versaclock5: versaclock_som@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+		/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
+		assigned-clocks = <&versaclock5 1>,
+				   <&versaclock5 2>,
+				   <&versaclock5 3>,
+				   <&versaclock5 4>;
+
+		assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data_a";
+		function = "hscif2";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif5_pins: scif5 {
+		groups = "scif5_data_a";
+		function = "scif5";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi2_pins>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb2_clksel {
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+		  <&versaclock5 3>, <&usb3s0_clk>;
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
new file mode 100644
index 0000000000..8c9da8b4bd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux sub board for CAT874 (CAT875)
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+	model = "Silicon Linux sub board for CAT874 (CAT875)";
+
+	aliases {
+		ethernet0 = &avb;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c915",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb {
+		mux {
+			groups = "avb_mii";
+			function = "avb";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi
new file mode 100644
index 0000000000..7c34d14dcd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor board with R-Car V3H
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &scif0;
+		ethernet0 = &gether;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	d1_8v: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	d3_3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&d3_3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0 0x48000000 0 0x78000000>;
+	};
+
+	vddq_vin01: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ_VIN01";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	x1_clk: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out0>;
+			};
+		};
+	};
+};
+
+&csi41 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi41_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out1>;
+			};
+		};
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&x1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander0: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander1: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		bgvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gmsl0: gmsl-deserializer@48 {
+		compatible = "maxim,max9286";
+		reg = <0x48>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out0: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4a {
+		compatible = "maxim,max9286";
+		reg = <0x4a>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out1: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi41_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&vddq_vin01>;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pfc {
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data_a";
+		function = "canfd0";
+	};
+
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
diff --git a/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso
new file mode 100644
index 0000000000..258f8668ca
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree overlay for the AA104XD12 panel connected to LVDS1 on a Draak or
+ * Ebisu board
+ *
+ * Copyright 2021 Ideas on Board Oy
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+#include "panel-aa104xd12.dtsi"
+};
+
+&{/panel} {
+	backlight = <&backlight>;
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&lvds1_out>;
+		};
+	};
+};
+
+&lvds1 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
new file mode 100644
index 0000000000..ef3bb835d5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Draak board
+ *
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas Draak board";
+	compatible = "renesas,draak";
+
+	aliases {
+		serial0 = &scif2;
+		ethernet0 = &avb;
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+
+		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+		default-brightness-level = <10>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW56-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW56-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW56-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW56-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&reg_3p3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x18000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		dais = <&rsnd_port0	/* ak4613 */
+			/* HDMI is not yet supported */
+		>;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x19_clk: x19 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&audio_clk_b {
+	/*
+	 * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB,
+	 * and R-Car Sound uses AUDIO_CLKB.
+	 * Note is that schematic indicates VI4_FIELD conection only
+	 * not AUDIO_CLKB at SoC page.
+	 * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60.
+	 * SW60 should be 1-2.
+	 */
+
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
+		/*
+		 * TX clock internal delay mode is required for reliable
+		 * 1Gbps communication using the KSZ9031RNX phy present on
+		 * the Draak board, however, TX clock internal delay mode
+		 * isn't supported on R-Car D3(e).  Thus, limit speed to
+		 * 100Mbps for reliable communication.
+		 */
+		max-speed = <100>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x12_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&hsusb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 0>; /* audio_clkout */
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+
+		port {
+			ak4613_endpoint: endpoint {
+				remote-endpoint = <&rsnd_for_ak4613>;
+			};
+		};
+	};
+
+	composite-in@20 {
+		compatible = "adi,adv7180cp";
+		reg = <0x20>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7180_in: endpoint {
+					remote-endpoint = <&composite_con_in>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, link it to
+				 * VIN4 here.
+				 */
+				adv7180_out: endpoint {
+					remote-endpoint = <&vin4_in>;
+				};
+			};
+		};
+
+	};
+
+	hdmi-encoder@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
+		reg-names = "main", "edid", "cec", "packet";
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	hdmi-decoder@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, leave HDMI
+				 * not connected here.
+				 */
+				adv7612_out: endpoint {
+					pclk-sample = <0>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x12_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	/*
+	 * Even though the LVDS1 output is not connected, the encoder must be
+	 * enabled to supply a pixel clock to the DU for the DPAD output when
+	 * LVDS0 is in use.
+	 */
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x12_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&pfc {
+	avb0_pins: avb {
+		groups = "avb0_link", "avb0_mdio", "avb0_mii";
+		function = "avb0";
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data_a";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	keys_pins: keys {
+		pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15";
+		bias-pull-up;
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0_c";
+		function = "pwm0";
+	};
+
+	pwm1_pins: pwm1 {
+		groups = "pwm1_c";
+		function = "pwm1";
+	};
+
+	rpc_pins: rpc {
+		groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
+			 "rpc_int";
+		function = "rpc";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a", "audio_clk_b",
+			 "audio_clkout", "audio_clkout1";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
+		 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&cs2000>, <&audio_clk_b>,
+		 <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+
+	ports {
+		rsnd_port0: port {
+			rsnd_for_ak4613: endpoint {
+				remote-endpoint = <&ak4613_endpoint>;
+				dai-format = "left_j";
+				bitclock-master = <&rsnd_for_ak4613>;
+				frame-master = <&rsnd_for_ak4613>;
+				playback = <&ssi3>, <&src5>, <&dvc0>;
+				capture = <&ssi4>, <&src6>, <&dvc1>;
+			};
+		};
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&rpc_pins>;
+	pinctrl-names = "default";
+
+	/* Left disabled.  To be enabled by firmware when unlocked. */
+
+	flash@0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			bl2@40000 {
+				reg = <0x00040000 0x140000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x040000>;
+				read-only;
+			};
+			tee@200000 {
+				reg = <0x00200000 0x440000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x100000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&ssi4 {
+	shared-pin;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	renesas,no-otg-pins;
+	status = "okay";
+};
+
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		port {
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi
new file mode 100644
index 0000000000..bbc29452d1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -0,0 +1,869 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Ebisu board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas Ebisu board";
+	compatible = "renesas,ebisu";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		serial0 = &scif2;
+		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 50000>;
+
+		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+		default-brightness-level = <10>;
+
+		power-supply = <&reg_12p0v>;
+	};
+
+	cvbs-in {
+		compatible = "composite-video-connector";
+		label = "CVBS IN";
+
+		port {
+			cvbs_con: endpoint {
+				remote-endpoint = <&adv7482_ain7>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		label = "HDMI IN";
+		type = "a";
+
+		port {
+			hdmi_in_con: endpoint {
+				remote-endpoint = <&adv7482_hdmi>;
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW4-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW4-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW4-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW4-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&reg_3p3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "rsnd-ak4613";
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS_CN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	x13_clk: x13 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+		/*
+		 * TX clock internal delay mode is required for reliable
+		 * 1Gbps communication using the KSZ9031RNX phy present on
+		 * the Ebisu board, however, TX clock internal delay mode
+		 * isn't supported on R-Car E3(e).  Thus, limit speed to
+		 * 100Mbps for reliable communication.
+		 */
+		max-speed = <100>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&adv7482_txa>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x13_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	io_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	hdmi-encoder@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70>;
+
+		interrupt-parent = <&gpio0>;
+		interrupt-names = "intrq1", "intrq2";
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
+			     <17 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@7 {
+				reg = <7>;
+
+				adv7482_ain7: endpoint {
+					remote-endpoint = <&cvbs_con>;
+				};
+			};
+
+			port@8 {
+				reg = <8>;
+
+				adv7482_hdmi: endpoint {
+					remote-endpoint = <&hdmi_in_con>;
+				};
+			};
+
+			port@a {
+				reg = <10>;
+
+				adv7482_txa: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0x1>;
+		rohm,rstbmode-level;
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x13_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	/*
+	 * Even though the LVDS1 output is not connected, the encoder must be
+	 * enabled to supply a pixel clock to the DU for the DPAD output when
+	 * LVDS0 is in use.
+	 */
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x13_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb {
+		groups = "avb_link", "avb_mii";
+		function = "avb";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	keys_pins: keys {
+		pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
+		bias-pull-up;
+	};
+
+	pwm3_pins: pwm3 {
+		groups = "pwm3_b";
+		function = "pwm3";
+	};
+
+	pwm5_pins: pwm5 {
+		groups = "pwm5_a";
+		function = "pwm5";
+	};
+
+	rpc_pins: rpc {
+		groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
+			 "rpc_int";
+		function = "rpc";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout1_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb {
+		groups = "usb0_b", "usb0_id";
+		function = "usb0";
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&pwm3 {
+	pinctrl-0 = <&pwm3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>, <&src0>, <&dvc0>;
+			capture = <&ssi1>, <&src1>, <&dvc1>;
+		};
+	};
+
+};
+
+&rpc {
+	pinctrl-0 = <&rpc_pins>;
+	pinctrl-names = "default";
+
+	/* Left disabled.  To be enabled by firmware when unlocked. */
+
+	flash@0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			bl2@40000 {
+				reg = <0x00040000 0x140000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x040000>;
+				read-only;
+			};
+			tee@200000 {
+				reg = <0x00200000 0x440000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x100000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi3 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi b/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi
new file mode 100644
index 0000000000..e0930d1ba3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Ideas on Board <kieran.bingham@ideasonboard.com>
+ * Copyright (C) 2021 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Device Tree Source (overlay) that describes GMSL camera connected to
+ * Fakra connectors for the Eagle V3M and Condor V3H (and compatible) boards.
+ *
+ * The following cameras are currently supported: RDACM20 and RDACM21.
+ *
+ * The board .dts file that include this has to select which cameras are in use
+ * by specifying the camera model with:
+ *
+ * #define GMSL_CAMERA_RDACM20
+ * or
+ * #define GMSL_CAMERA_RDACM21
+ *
+ * And which cameras are connected to the board by defining:
+ * for GMSL channel 0:
+ *	   #define GMSL_CAMERA_0
+ *	   #define GMSL_CAMERA_1
+ *	   #define GMSL_CAMERA_2
+ *	   #define GMSL_CAMERA_3
+ *
+ * for GMSL channel 1:
+ *	   #define GMSL_CAMERA_4
+ *	   #define GMSL_CAMERA_5
+ *	   #define GMSL_CAMERA_6
+ *	   #define GMSL_CAMERA_7
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/* Validate the board file settings. */
+#if !defined(GMSL_CAMERA_RDACM20) && !defined(GMSL_CAMERA_RDACM21)
+#error "Camera model should be defined by the board file"
+#endif
+
+#if defined(GMSL_CAMERA_RDACM20) && defined(GMSL_CAMERA_RDACM21)
+#error "A single camera model should be selected"
+#endif
+
+#if !defined(GMSL_CAMERA_0) && !defined(GMSL_CAMERA_1) && \
+    !defined(GMSL_CAMERA_2) && !defined(GMSL_CAMERA_3) && \
+    !defined(GMSL_CAMERA_4) && !defined(GMSL_CAMERA_5) && \
+    !defined(GMSL_CAMERA_6) && !defined(GMSL_CAMERA_7)
+#error "At least one camera should be selected"
+#endif
+
+/* Deduce from the enabled cameras which GMSL channels are active. */
+#if defined(GMSL_CAMERA_0) || defined(GMSL_CAMERA_1) || \
+    defined(GMSL_CAMERA_2) || defined(GMSL_CAMERA_3)
+#define GMSL_0
+#endif
+
+#if defined(GMSL_CAMERA_4) || defined(GMSL_CAMERA_5) || \
+    defined(GMSL_CAMERA_6) || defined(GMSL_CAMERA_7)
+#define GMSL_1
+#endif
+
+/* Deduce the camera model compatible string. */
+#if defined(GMSL_CAMERA_RDACM20)
+#define GMSL_CAMERA_MODEL "imi,rdacm20"
+#elif defined(GMSL_CAMERA_RDACM21)
+#define GMSL_CAMERA_MODEL "imi,rdacm21"
+#endif
+
+#ifdef GMSL_0
+&vin0 {
+	status = "okay";
+};
+
+&vin1 {
+	status = "okay";
+};
+
+&vin2 {
+	status = "okay";
+};
+
+&vin3 {
+	status = "okay";
+};
+
+&gmsl0 {
+	status = "okay";
+
+#if defined(GMSL_CAMERA_RDACM21)
+	maxim,reverse-channel-microvolt = <100000>;
+#endif
+
+	ports {
+#ifdef GMSL_CAMERA_0
+		port@0 {
+			max9286_in0: endpoint {
+				remote-endpoint = <&fakra_con0>;
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_1
+		port@1 {
+			max9286_in1: endpoint {
+				remote-endpoint = <&fakra_con1>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_2
+		port@2 {
+			max9286_in2: endpoint {
+				remote-endpoint = <&fakra_con2>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_3
+		port@3 {
+			max9286_in3: endpoint {
+				remote-endpoint = <&fakra_con3>;
+			};
+
+		};
+#endif
+	};
+
+	i2c-mux {
+#ifdef GMSL_CAMERA_0
+		i2c@0 {
+			status = "okay";
+
+			camera@51 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x51>, <0x61>;
+
+				port {
+					fakra_con0: endpoint {
+						remote-endpoint = <&max9286_in0>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_1
+		i2c@1 {
+			status = "okay";
+
+			camera@52 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x52>, <0x62>;
+
+				port {
+					fakra_con1: endpoint {
+						remote-endpoint = <&max9286_in1>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_2
+		i2c@2 {
+			status = "okay";
+
+			camera@53 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x53>, <0x63>;
+
+				port {
+					fakra_con2: endpoint {
+						remote-endpoint = <&max9286_in2>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_3
+		i2c@3 {
+			status = "okay";
+
+			camera@54 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x54>, <0x64>;
+
+				port {
+					fakra_con3: endpoint {
+						remote-endpoint = <&max9286_in3>;
+					};
+				};
+			};
+		};
+#endif
+	};
+};
+#endif /* ifdef GMSL_0 */
+
+#ifdef GMSL_1
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&vin6 {
+	status = "okay";
+};
+
+&vin7 {
+	status = "okay";
+};
+
+&gmsl1 {
+	status = "okay";
+
+#if defined(GMSL_CAMERA_RDACM21)
+	maxim,reverse-channel-microvolt = <100000>;
+#endif
+
+	ports {
+#ifdef GMSL_CAMERA_4
+		port@0 {
+			max9286_in4: endpoint {
+				remote-endpoint = <&fakra_con4>;
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_5
+		port@1 {
+			max9286_in5: endpoint {
+				remote-endpoint = <&fakra_con5>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_6
+		port@2 {
+			max9286_in6: endpoint {
+				remote-endpoint = <&fakra_con6>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_7
+		port@3 {
+			max9286_in7: endpoint {
+				remote-endpoint = <&fakra_con7>;
+			};
+
+		};
+#endif
+	};
+
+	i2c-mux {
+#ifdef GMSL_CAMERA_4
+		i2c@0 {
+			status = "okay";
+
+			camera@55 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x55>, <0x65>;
+
+				port {
+					fakra_con4: endpoint {
+						remote-endpoint = <&max9286_in4>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_5
+		i2c@1 {
+			status = "okay";
+
+			camera@56 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x56>, <0x66>;
+
+				port {
+					fakra_con5: endpoint {
+						remote-endpoint = <&max9286_in5>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_6
+		i2c@2 {
+			status = "okay";
+
+			camera@57 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x57>, <0x67>;
+
+				port {
+					fakra_con6: endpoint {
+						remote-endpoint = <&max9286_in6>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_7
+		i2c@3 {
+			status = "okay";
+
+			camera@58 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x58>, <0x68>;
+
+				port {
+					fakra_con7: endpoint {
+						remote-endpoint = <&max9286_in7>;
+					};
+				};
+			};
+		};
+#endif
+	};
+};
+#endif /* ifdef GMSL_1 */
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
new file mode 100644
index 0000000000..83104af281
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &iic_pmic;
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4 {
+			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		label = "rcar-sound";
+
+		dais = <&rsnd_port>;
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&du {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb1-reset-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "usb1-reset";
+	};
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint>;
+			};
+		};
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5923";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	status = "okay";
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	companion = <&xhci0>;
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
new file mode 100644
index 0000000000..8e2db1d6ca
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common
+ * parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		bt_active_led {
+			label = "blue:bt";
+			gpios = <&gpio7  0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+
+		wlan_active_led {
+			label = "yellow:wlan";
+			gpios = <&gpio7  1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c4 {
+	gpio_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pfc {
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a";
+		function = "audio_clk";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
new file mode 100644
index 0000000000..7fc0339a3a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x1801_clk: x1801-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x1801_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&pfc {
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	/*
+	 * Update <audio_clk_b> to <cs2000>
+	 * Switch SW2404 should be at position 1 so that clock from
+	 * CS2000 is connected to AUDIO_CLKB_A
+	 */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
new file mode 100644
index 0000000000..3771144a2c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[HMN] MIPI common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#define MIPI_OV5645_PARENT_I2C i2c2
+#define MIPI_IMX219_PARENT_I2C i2c3
+#include "aistarvision-mipi-adapter-2.1.dtsi"
+
+&csi20 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi20_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5645_ep>;
+			};
+		};
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&imx219_ep>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&imx219 {
+	port {
+		imx219_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			link-frequencies = /bits/ 64 <456000000>;
+			remote-endpoint = <&csi40_in>;
+		};
+	};
+};
+
+&ov5645 {
+	enable-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+
+	port {
+		ov5645_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&csi20_in>;
+		};
+	};
+};
+
+&pfc {
+	i2c3_pins: i2c3 {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+};
+
+&vin0 {
+	status = "okay";
+};
+
+&vin1 {
+	status = "okay";
+};
+
+&vin2 {
+	status = "okay";
+};
+
+&vin3 {
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&vin6 {
+	status = "okay";
+};
+
+&vin7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
new file mode 100644
index 0000000000..d66d17e346
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[MN] HiHope sub board LVDS common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/ {
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000>;
+
+		brightness-levels = <0 2 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&gpio1 {
+	/*
+	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
+	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
+	 */
+	lvds-connector-en-hog {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
new file mode 100644
index 0000000000..ad898c6db4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	rx-internal-delay-ps = <1800>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c915",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi
new file mode 100644
index 0000000000..4b1f0982b9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common file for the AA104XD12 panel connected to Renesas R-Car Gen3 boards.
+ *
+ * Copyright (C) 2014 Renesas Electronics Corp.
+ */
+
+panel {
+	compatible = "mitsubishi,aa104xd12", "panel-lvds";
+
+	width-mm = <210>;
+	height-mm = <158>;
+	data-mapping = "jeida-18";
+
+	panel-timing {
+		/* 1024x768 @65Hz */
+		clock-frequency = <65000000>;
+		hactive = <1024>;
+		vactive = <768>;
+		hsync-len = <136>;
+		hfront-porch = <20>;
+		hback-porch = <160>;
+		vfront-porch = <3>;
+		vback-porch = <29>;
+		vsync-len = <6>;
+	};
+
+	port {
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
new file mode 100644
index 0000000000..24da6ee6ec
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774a1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks RZ/G2M Development Kit";
+	compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &iic_pmic;
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
new file mode 100644
index 0000000000..06c04c59cc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
new file mode 100644
index 0000000000..5c91e0d7e6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M board
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M with sub board connected with aistarvision-mipi-v2-adapter board";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+};
+
+/*
+ * On RZ/G2M SoC LSI V1.3 CSI40 supports only 4 lane mode.
+ * HiHope RZ/G2M Rev.4.0 board is based on LSI V1.3 so disable csi40 and
+ * imx219 as the imx219 endpoint driver supports only 2 lane mode.
+ */
+&csi40 {
+	status = "disabled";
+};
+
+&imx219 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
new file mode 100644
index 0000000000..a5ca86196a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
new file mode 100644
index 0000000000..c0e9d8ca4a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 sub board connected to an
+ * Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-rev2-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts
new file mode 100644
index 0000000000..2221cf6aed
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 connected to sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-rev2.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M (Rev.2.0) with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
new file mode 100644
index 0000000000..bb18f6ee20
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev2.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M main board (Rev.2.0) based on r8a774a1";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
new file mode 100644
index 0000000000..25ae255de0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
new file mode 100644
index 0000000000..9065dc2434
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -0,0 +1,2865 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774a1 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774a1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774a1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774A1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774a1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774A1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774A1_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774a1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774a1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774a1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774a1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774a1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774a1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774a1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x0bb0>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774a1-rst";
+			reg = <0 0xe6160000 0 0x018c>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774a1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774a1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774a1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		iic_pmic: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774a1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774a1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_clksel: clock-controller@e6590630 {
+			compatible = "renesas,r8a774a1-rcar-usb2-clock-sel",
+				     "renesas,rcar-gen3-usb2-clock-sel";
+			reg = <0 0xe6590630 0 0x02>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+				 <&usb_extal_clk>, <&usb3s0_clk>;
+			clock-names = "ehci_ohci", "hs-usb-if",
+				      "usb_extal", "usb_xtal";
+			#clock-cells = <0>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			reset-names = "ehci_ohci", "hs-usb-if";
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774a1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774a1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774a1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774a1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774a1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774a1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774a1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774a1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a774a1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774A1_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774A1_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774A1_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774A1_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774a1-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774a1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774a1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774a1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a774a1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 615>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a774a1-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774a1-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a774a1-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A774A1_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774a1";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
+			status = "disabled";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a774a1-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
new file mode 100644
index 0000000000..8b9df6afff
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774b1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon Embedded Works RZ/G2N Development Kit";
+	compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &iic_pmic;
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		serial6 = &scif4;
+		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		<&cpg CPG_MOD 723>,
+		<&cpg CPG_MOD 721>,
+		<&versaclock5 1>,
+		<&x302_clk>,
+		<&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		"dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts
new file mode 100644
index 0000000000..4b5154f029
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 with sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
new file mode 100644
index 0000000000..ce8e3bcc7d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N board
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1-hihope-rzg2n-ex.dts"
+#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N with sub board connected with aistarvision-mipi-v2-adapter board";
+	compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
new file mode 100644
index 0000000000..60d7c8adea
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
+		     "renesas,r8a774b1";
+};
+
+/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts
new file mode 100644
index 0000000000..e730b3b25d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 with sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-rev2-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts
new file mode 100644
index 0000000000..2e5e1de040
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 connected to sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-rev2.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N (Rev.2.0) with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
+		     "renesas,r8a774b1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
new file mode 100644
index 0000000000..c69ca5cf6f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1.dtsi"
+#include "hihope-rev2.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N main board (Rev.2.0) based on r8a774b1";
+	compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
new file mode 100644
index 0000000000..f1883cbd1a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N main board Rev.3.0/4.0
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N main board based on r8a774b1";
+	compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
new file mode 100644
index 0000000000..75776decd2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -0,0 +1,2716 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774b1 SoC
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774b1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774b1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774B1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774b1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774B1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774B1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774B1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774b1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774b1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774b1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774b1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774b1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774b1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774b1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774b1-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774b1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774b1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774b1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		iic_pmic: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774b1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774b1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_clksel: clock-controller@e6590630 {
+			compatible = "renesas,r8a774b1-rcar-usb2-clock-sel",
+				     "renesas,rcar-gen3-usb2-clock-sel";
+			reg = <0 0xe6590630 0 0x02>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+				 <&usb_extal_clk>, <&usb3s0_clk>;
+			clock-names = "ehci_ohci", "hs-usb-if",
+				      "usb_extal", "usb_xtal";
+			#clock-cells = <0>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			reset-names = "ehci_ohci", "hs-usb-if";
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774b1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774b1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774b1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774B1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774b1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774b1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774B1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774b1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774B1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774b1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774B1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774b1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774b1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774b1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a774b1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774B1_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774B1_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774B1_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774B1_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774b1-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a774b1",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774b1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774b1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774b1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a774b1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 615>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 611>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a774b1-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774b1-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a774b1-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A774B1_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774b1";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
+			status = "disabled";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a774b1-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <2439>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
new file mode 100644
index 0000000000..5a6ea08ffd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774c0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/display/tda998x.h>
+
+/ {
+	model = "Silicon Linux RZ/G2E 96board platform (CAT874)";
+	compatible = "si-linux,cat874", "renesas,r8a774c0";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif2;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&tda19988_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+			label = "LED0";
+		};
+
+		led1 {
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			label = "LED1";
+		};
+
+		led2 {
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+			label = "LED2";
+		};
+
+		led3 {
+			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "CAT874 HDMI sound";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	wlan_en_reg: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x13_clk: x13 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x13_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&tda19988_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&hscif2 {
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+
+	tda19988: tda19988@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		video-ports = <0x234501>;
+
+		#sound-dai-cells = <0>;
+		audio-ports = <TDA998x_I2S 0x03>;
+		clocks = <&rcar_sound 1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				tda19988_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				tda19988_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@32 {
+		compatible = "epson,rx8571";
+		reg = <0x32>;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	/* Map all possible DDR as inbound ranges */
+	dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+};
+
+&pfc {
+	du_pins: du {
+		groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp",
+			 "du_clk_in_0";
+		function = "du";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data_a", "hscif2_ctrl_a";
+		function = "hscif2";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1_b";
+		function = "i2c1";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clkout1_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data";
+		function = "ssi";
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30", "usb30_id";
+		function = "usb30";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>, <&src0>, <&dvc0>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi3 {
+	status = "okay";
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&usb2_phy0 {
+	renesas,no-otg-pins;
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
new file mode 100644
index 0000000000..c1812d1ef0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874),
+ * connected to an Advantech IDK-2121WR 21.5" LVDS panel
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774c0-ek874.dts"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm5 0 50000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel-lvds {
+		compatible = "advantech,idk-2121wr", "panel-lvds";
+
+		width-mm = <476>;
+		height-mm = <268>;
+
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hsync-len = <44>;
+			hfront-porch = <88>;
+			hback-porch = <148>;
+			vfront-porch = <4>;
+			vback-porch = <36>;
+			vsync-len = <5>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+				panel_in0: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+				panel_in1: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+		};
+	};
+};
+
+&gpio0 {
+	/*
+	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
+	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
+	 */
+	lvds-connector-en-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in0>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in1>;
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm5_pins: pwm5 {
+		groups = "pwm5_a";
+		function = "pwm5";
+	};
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
new file mode 100644
index 0000000000..2e3d1981ca
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774c0-ek874.dts"
+#define MIPI_OV5645_PARENT_I2C i2c3
+#define MIPI_IMX219_PARENT_I2C i2c3
+#include "aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+	model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875) with aistarvision-mipi-v2-adapter board";
+	compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5645_ep>;
+			};
+		};
+	};
+};
+
+&ov5645 {
+	enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+	port {
+		ov5645_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&csi40_in>;
+		};
+	};
+};
+
+&imx219 {
+	port {
+		imx219_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			link-frequencies = /bits/ 64 <456000000>;
+			/* uncomment remote-endpoint property to tie imx219 to
+			 * CSI2 also make sure remote-endpoint for ov5645 camera
+			 * is commented and remote endpoint phandle in csi40_in
+			 * is imx219_ep
+			 */
+			/* remote-endpoint = <&csi40_in>; */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874.dts
new file mode 100644
index 0000000000..e7b6619ab2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874)
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774c0-cat874.dts"
+#include "cat875.dtsi"
+
+/ {
+	model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875)";
+	compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
new file mode 100644
index 0000000000..ad2e87b039
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -0,0 +1,2000 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2E (R8A774C0) SoC
+ *
+ * Copyright (C) 2018-2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a774c0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a774c0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			power-domains = <&sysc R8A774C0_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774C0_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774C0_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774c0-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 11>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 20>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774c0";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774c0-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774c0-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774c0-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774c0-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774c0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774c0-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774c0-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a774c0";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774c0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6690000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6690000 0 0x40>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1003>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 1003>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		iic_pmic: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774c0",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774c0",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774C0_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774c0",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774c0",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774c0",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774c0-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x5b>, <&dmac0 0x5a>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774c0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774c0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774c0",
+				     "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774C0_CLK_ZA2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma0 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma0 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma0 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma0 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+				 <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+				 <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+				 <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+				 <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+				 <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+				 <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+				 <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774c0",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774c0-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774c0",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774C0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774C0_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774C0_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774c0-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774c0",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774c0-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vspb0: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 626>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x7000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x7000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 631>;
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774c0-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi40>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774c0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a774c0-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			renesas,companion = <&lvds1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a774c0-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
new file mode 100644
index 0000000000..146f78cb6f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774e1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon Embedded Works RZ/G2H Development Kit";
+	compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &iic_pmic;
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		serial6 = &scif4;
+		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		<&cpg CPG_MOD 723>,
+		<&cpg CPG_MOD 721>,
+		<&versaclock5 1>,
+		<&x302_clk>,
+		<&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		"dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts
new file mode 100644
index 0000000000..3b7339127b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774e1-hihope-rzg2h-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
new file mode 100644
index 0000000000..46adb6efb5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H board
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774e1-hihope-rzg2h-ex.dts"
+#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H with sub board connected with aistarvision-mipi-v2-adapter board";
+	compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
new file mode 100644
index 0000000000..8129959398
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774e1-hihope-rzg2h.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h",
+		     "renesas,r8a774e1";
+};
+
+/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
new file mode 100644
index 0000000000..9525d5ed6f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H main board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774e1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H main board based on r8a774e1";
+	compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
new file mode 100644
index 0000000000..2acf4067ab
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -0,0 +1,2997 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774e1 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774e1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774e1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774E1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774e1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+				core2 {
+					cpu = <&a57_2>;
+				};
+				core3 {
+					cpu = <&a57_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU2>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU3>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774e1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774e1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774e1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774e1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774e1-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774e1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774e1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774e1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		iic_pmic: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774e1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774e1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_clksel: clock-controller@e6590630 {
+			compatible = "renesas,r8a774e1-rcar-usb2-clock-sel",
+				     "renesas,rcar-gen3-usb2-clock-sel";
+			reg = <0 0xe6590630 0 0x02>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+				 <&usb_extal_clk>, <&usb3s0_clk>;
+			clock-names = "ehci_ohci", "hs-usb-if",
+				      "usb_extal", "usb_xtal";
+			#clock-cells = <0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			reset-names = "ehci_ohci", "hs-usb-if";
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774e1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774e1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774e1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+				 <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+				 <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+				 <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+				 <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+				 <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+				 <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+				 <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+				 <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+				 <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+				 <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+				 <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+				 <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+				 <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+				 <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp0: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv2: iommu@fd960000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv3: iommu@fd970000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd970000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc1: iommu@fe6f0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6f0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 13>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@febe0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebe0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 15>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp1: iommu@fe980000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe980000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 17>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774e1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774e1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>,
+				 <&ipmmu_mp0 2>, <&ipmmu_mp0 3>,
+				 <&ipmmu_mp0 4>, <&ipmmu_mp0 5>,
+				 <&ipmmu_mp0 6>, <&ipmmu_mp0 7>,
+				 <&ipmmu_mp0 8>, <&ipmmu_mp0 9>,
+				 <&ipmmu_mp0 10>, <&ipmmu_mp0 11>,
+				 <&ipmmu_mp0 12>, <&ipmmu_mp0 13>,
+				 <&ipmmu_mp0 14>, <&ipmmu_mp0 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>,
+				 <&ipmmu_mp0 18>, <&ipmmu_mp0 19>,
+				 <&ipmmu_mp0 20>, <&ipmmu_mp0 21>,
+				 <&ipmmu_mp0 22>, <&ipmmu_mp0 23>,
+				 <&ipmmu_mp0 24>, <&ipmmu_mp0 25>,
+				 <&ipmmu_mp0 26>, <&ipmmu_mp0 27>,
+				 <&ipmmu_mp0 28>, <&ipmmu_mp0 29>,
+				 <&ipmmu_mp0 30>, <&ipmmu_mp0 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774e1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774e1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774e1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a774e1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774E1_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774E1_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774E1_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774E1_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774e1-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a774e1",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			iommus = <&ipmmu_hc 2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774e1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774e1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774e1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a774e1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 624>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 630>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 118>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 615>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 614>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 606>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 611>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 610>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a774e1-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774e1-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a774e1-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A774E1_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774e1";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
+			status = "disabled";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a774e1-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <6313>;
+
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
new file mode 100644
index 0000000000..d8e655ba81
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77951.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a77951";
+	compatible = "renesas,salvator-x", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
new file mode 100644
index 0000000000..7f9fa842f0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0+
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77951.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a77951";
+	compatible = "renesas,salvator-xs", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
new file mode 100644
index 0000000000..2e58a27aa2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES2.0+
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a77951-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas H3ULCB Kingfisher board based on r8a77951";
+	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
+		     "renesas,r8a7795";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts
new file mode 100644
index 0000000000..06d4e948eb
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES2.0+
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77951.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas H3ULCB board based on r8a77951";
+	compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 4>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
new file mode 100644
index 0000000000..6d15229d25
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -0,0 +1,3485 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car H3 (R8A77951) SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7795-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
+
+#define SOC_HAS_HDMI1
+#define SOC_HAS_SATA
+#define SOC_HAS_USB2_CH2
+#define SOC_HAS_USB2_CH3
+
+/ {
+	compatible = "renesas,r8a7795";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+				core2 {
+					cpu = <&a57_2>;
+				};
+				core3 {
+					cpu = <&a57_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7795_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7795_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>,
+				     <&a53_1>,
+				     <&a53_2>,
+				     <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>,
+				     <&a57_1>,
+				     <&a57_2>,
+				     <&a57_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7795";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a7795-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7795-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a7795-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a7795-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7795-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7795-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7795-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a7795-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a7795", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7795",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 96>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 96>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 96>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		hsusb3: usb@e659c000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe659c000 0 0x200>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>;
+			dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
+			       <&usb_dmac3 0>, <&usb_dmac3 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy3 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 705>, <&cpg 700>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac2: dma-controller@e6460000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe6460000 0 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 326>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 326>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac3: dma-controller@e6470000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe6470000 0 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 329>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a7795-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A7795_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp0: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv2: iommu@fd960000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv3: iommu@fd970000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd970000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc1: iommu@fe6f0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe6f0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 13>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@febe0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfebe0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 15>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp1: iommu@fe980000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe980000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 17>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7795",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a7795",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a7795",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7795-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a7795", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin7>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x64>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x64>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x64>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x64>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x64>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x64>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a7795-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>,
+			       <&ipmmu_mp0 2>, <&ipmmu_mp0 3>,
+			       <&ipmmu_mp0 4>, <&ipmmu_mp0 5>,
+			       <&ipmmu_mp0 6>, <&ipmmu_mp0 7>,
+			       <&ipmmu_mp0 8>, <&ipmmu_mp0 9>,
+			       <&ipmmu_mp0 10>, <&ipmmu_mp0 11>,
+			       <&ipmmu_mp0 12>, <&ipmmu_mp0 13>,
+			       <&ipmmu_mp0 14>, <&ipmmu_mp0 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>,
+			       <&ipmmu_mp0 18>, <&ipmmu_mp0 19>,
+			       <&ipmmu_mp0 20>, <&ipmmu_mp0 21>,
+			       <&ipmmu_mp0 22>, <&ipmmu_mp0 23>,
+			       <&ipmmu_mp0 24>, <&ipmmu_mp0 25>,
+			       <&ipmmu_mp0 26>, <&ipmmu_mp0 27>,
+			       <&ipmmu_mp0 28>, <&ipmmu_mp0 29>,
+			       <&ipmmu_mp0 30>, <&ipmmu_mp0 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a7795-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ohci2: usb@ee0c0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0c0000 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 701>;
+			status = "disabled";
+		};
+
+		ohci3: usb@ee0e0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0e0000 0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
+			phys = <&usb2_phy3 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>, <&cpg 705>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci2: usb@ee0c0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0c0100 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2 2>;
+			phy-names = "usb";
+			companion = <&ohci2>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 701>;
+			status = "disabled";
+		};
+
+		ehci3: usb@ee0e0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0e0100 0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
+			phys = <&usb2_phy3 2>;
+			phy-names = "usb";
+			companion = <&ohci3>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>, <&cpg 705>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy2: usb-phy@ee0c0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0c0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 701>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 701>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy3: usb-phy@ee0e0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0e0200 0 0x700>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>, <&cpg 705>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A7795_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A7795_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A7795_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A7795_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a7795-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a7795",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+			iommus = <&ipmmu_hc 2>;
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7795",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a7795",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a7795-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a7795-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		imr-lx4@fe860000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe860000 0 0x2000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 823>;
+		};
+
+		imr-lx4@fe870000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe870000 0 0x2000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 822>;
+		};
+
+		imr-lx4@fe880000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe880000 0 0x2000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 821>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 821>;
+		};
+
+		imr-lx4@fe890000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe890000 0 0x2000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 820>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 820>;
+		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 624>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 630>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 118>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 615>;
+			iommus = <&ipmmu_vp0 0>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 614>;
+			iommus = <&ipmmu_vp1 1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 606>;
+			iommus = <&ipmmu_vp1 7>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 610>;
+			iommus = <&ipmmu_vp1 9>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi1 10>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm2: cmm@fea60000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea60000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 709>;
+			resets = <&cpg 709>;
+		};
+
+		cmm3: cmm@fea70000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea70000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 708>;
+			resets = <&cpg 708>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a7795-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a7795-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@feab0000 {
+			compatible = "renesas,r8a7795-csi2";
+			reg = <0 0xfeab0000 0 0x10000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi41vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi41>;
+					};
+					csi41vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi41>;
+					};
+					csi41vin6: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin6csi41>;
+					};
+					csi41vin7: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin7csi41>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		hdmi1: hdmi@feae0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfeae0000 0 0x10000>;
+			interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 728>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 728>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi1_in: endpoint {
+						remote-endpoint = <&du_out_hdmi1>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7795";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.2", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
+
+			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>,
+				       <&vspd0 1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_hdmi1: endpoint {
+						remote-endpoint = <&dw_hdmi1_in>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7795-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts
new file mode 100644
index 0000000000..d5543f26c4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car M3-W
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77960.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a77960";
+	compatible = "renesas,salvator-x", "renesas,r8a7796";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts
new file mode 100644
index 0000000000..9ebb47b6bf
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77960.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a77960";
+	compatible = "renesas,salvator-xs", "renesas,r8a7796";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
new file mode 100644
index 0000000000..02d6136069
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a77960-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3ULCB Kingfisher board based on r8a77960";
+	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
+		     "renesas,r8a7796";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts
new file mode 100644
index 0000000000..4bfeb1df04
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77960.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a77960";
+	compatible = "renesas,m3ulcb", "renesas,r8a7796";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
new file mode 100644
index 0000000000..17062ec506
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -0,0 +1,3080 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M3-W (R8A77960) SoC
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7796-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A7796_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a7796";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7796_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7796_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7796-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7796";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a7796-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7796-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a7796-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a7796-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7796-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7796-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7796-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a7796-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a7796", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7796",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7796",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7796-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7796-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a7796-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A7796_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7796",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a7796",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a7796",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7796-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a7796", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x64>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x64>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x64>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x64>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x64>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x64>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7796_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a7796-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7796",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a7796-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A7796_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A7796_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A7796_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A7796_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a7796-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		imr-lx4@fe860000 {
+			compatible = "renesas,r8a7796-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe860000 0 0x2000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 823>;
+		};
+
+		imr-lx4@fe870000 {
+			compatible = "renesas,r8a7796-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe870000 0 0x2000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 822>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 615>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a7796-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a7796-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm2: cmm@fea60000 {
+			compatible = "renesas,r8a7796-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea60000 0 0x1000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 709>;
+			resets = <&cpg 709>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a7796-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a7796-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a7796-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7796_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7796";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
+
+			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7796-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
new file mode 100644
index 0000000000..c7f14177f7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W+
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77961.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a77961";
+	compatible = "renesas,salvator-xs", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts
new file mode 100644
index 0000000000..d66eb27ee8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W+
+ *
+ * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com>
+ */
+
+#include "r8a77961-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3ULCB Kingfisher board based on r8a77961";
+	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
+		     "renesas,r8a77961";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts
new file mode 100644
index 0000000000..70cf926667
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W+
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77961.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a77961";
+	compatible = "renesas,m3ulcb", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
new file mode 100644
index 0000000000..d3f47da1b6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -0,0 +1,2901 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M3-W+ (R8A77961) SoC
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a77961-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77961-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A77961_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a77961";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77961_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77961_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77961-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77961";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77961-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77961-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77961-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77961-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77961-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77961-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77961-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77961-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77961", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77961",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77961",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77961-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77961-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a77961-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77961_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77961",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77961",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77961_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77961",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77961_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77961-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77961_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77961", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77961",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77961",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77961",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77961",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A77961_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77961-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77961",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a77961-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77961",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a77961",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77961_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77961_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77961_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77961_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77961-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77961",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a77961",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 615>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a77961-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77961-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a77961-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A77961_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77961";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a77961-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
new file mode 100644
index 0000000000..f84c64ed4d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a77965";
+	compatible = "renesas,salvator-x", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
new file mode 100644
index 0000000000..a1d3c8d531
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-N
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a77965";
+	compatible = "renesas,salvator-xs", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
new file mode 100644
index 0000000000..a601968c57
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB Kingfisher board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include "r8a77965-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3NULCB Kingfisher board based on r8a77965";
+	compatible = "shimafuji,kingfisher", "renesas,m3nulcb",
+		     "renesas,r8a77965";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts
new file mode 100644
index 0000000000..71704b67a2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3NULCB board based on r8a77965";
+	compatible = "renesas,m3nulcb", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
new file mode 100644
index 0000000000..c758200384
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -0,0 +1,2889 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M3-N (R8A77965) SoC
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Based on r8a7796.dtsi
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a77965-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77965-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A77965_CLK_S0D4
+
+#define SOC_HAS_SATA
+
+/ {
+	compatible = "renesas,r8a77965";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77965_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77965_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>,
+				     <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77965-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77965";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77965-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77965-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77965-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77965-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77965-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77965-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77965-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77965-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77965", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77965",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77965",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77965-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77965-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a77965-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77965_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77965",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77965",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77965",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77965-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77965", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x84>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x84>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x84>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x84>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x84>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x84>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x84>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x84>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A77965_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77965-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77965",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a77965-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77965",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a77965",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77965_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77965_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77965_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77965_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77965-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a77965",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 615>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 611>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm3: cmm@fea70000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea70000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 708>;
+			resets = <&cpg 708>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a77965-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77965-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a77965-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A77965_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77965";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
+
+			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a77965-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <2439>;
+
+			trips {
+				target: trip-point1 {
+					/* miliCelsius  */
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
new file mode 100644
index 0000000000..405404c084
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Eagle board with R-Car V3M
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas Eagle board based on r8a77970";
+	compatible = "renesas,eagle", "renesas,r8a77970";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		serial0 = &scif0;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	d3p3: regulator-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+
+		vcc-supply = <&d3p3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	x1_clk: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out0>;
+			};
+		};
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>, <&x1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gmsl0: gmsl-deserializer@48 {
+		compatible = "maxim,max9286";
+		reg = <0x48>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out0: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb0 {
+		groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+		function = "avb0";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data_a";
+		function = "canfd0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c3_pins: i2c3 {
+		groups = "i2c3_a";
+		function = "i2c3";
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
new file mode 100644
index 0000000000..e36999e91a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the V3M Starter Kit board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas V3M Starter Kit board";
+	compatible = "renesas,v3msk", "renesas,r8a77970";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		serial0 = &scif0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&vcc_d3_3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	osc5_clk: osc5-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	vcc_d1_8v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_d3_3v: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_vddq_vin0: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_VDDQ_VIN0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&osc5_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		#sound-dai-cells = <0>;
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&vcc_d1_8v>;
+		dvdd-supply = <&vcc_d1_8v>;
+		pvdd-supply = <&vcc_d1_8v>;
+		bgvdd-supply = <&vcc_d1_8v>;
+		dvdd-3v-supply = <&vcc_d3_3v>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_d3_3v>;
+	vqmmc-supply = <&vcc_vddq_vin0>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb0 {
+		groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+		function = "avb0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	mmc_pins: mmc_3_3v {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <3300>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
new file mode 100644
index 0000000000..ed6e2e47c6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -0,0 +1,1220 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V3M (R8A77970) SoC
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include <dt-bindings/clock/r8a77970-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a77970-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77970";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>;
+			power-domains = <&sysc R8A77970_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>;
+			power-domains = <&sysc R8A77970_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller {
+			compatible = "cache";
+			power-domains = <&sysc R8A77970_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77970-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 22>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 6>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77970";
+			reg = <0 0xe6060000 0 0x504>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77970-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77970-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77970-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77970-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77970-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77970-rst";
+			reg = <0 0xe6160000 0 0x200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77970-sysc";
+			reg = <0 0xe6180000 0 0x440>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77970";
+			reg = <0 0xe6190000 0 0x10>,
+			      <0 0xe6190100 0 0x120>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77970", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac1 0x97>, <&dmac1 0x96>,
+			       <&dmac2 0x97>, <&dmac2 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac1 0x99>, <&dmac1 0x98>,
+			       <&dmac2 0x99>, <&dmac2 0x98>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 96>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 96>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x37>, <&dmac1 0x36>,
+			       <&dmac2 0x37>, <&dmac2 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77970-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A77970_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77970_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77970",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_rt 3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x57>, <&dmac1 0x56>,
+			       <&dmac2 0x57>, <&dmac2 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x59>, <&dmac1 0x58>,
+			       <&dmac2 0x59>, <&dmac2 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77970", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			dmas = <&dmac1 0x45>, <&dmac1 0x44>,
+			       <&dmac2 0x45>, <&dmac2 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			dmas = <&dmac1 0x47>, <&dmac1 0x46>,
+			       <&dmac2 0x47>, <&dmac2 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77970",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77970",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77970_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77970",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77970-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1010000 0 0x1000>,
+			      <0 0xf1020000 0 0x20000>,
+			      <0 0xf1040000 0 0x20000>,
+			      <0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77970-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77970-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint =
+							<&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			cooling-maps {
+			};
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
new file mode 100644
index 0000000000..68d1f1d53b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor board with R-Car V3H
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77980.dtsi"
+#include "condor-common.dtsi"
+
+/ {
+	model = "Renesas Condor board based on r8a77980";
+	compatible = "renesas,condor", "renesas,r8a77980";
+};
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
new file mode 100644
index 0000000000..77d22df25f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the V3H Starter Kit board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77980.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas V3H Starter Kit board";
+	compatible = "renesas,v3hsk", "renesas,r8a77980";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &scif0;
+		ethernet0 = &gether;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&vcc3v3_d5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0 0x48000000 0 0x78000000>;
+	};
+
+	osc1_clk: osc1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	vcc1v8_d4: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8_D4";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc3v3_d5: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_D5";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&osc1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		#sound-dai-cells = <0>;
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&vcc1v8_d4>;
+		dvdd-supply = <&vcc1v8_d4>;
+		pvdd-supply = <&vcc1v8_d4>;
+		bgvdd-supply = <&vcc1v8_d4>;
+		dvdd-3v-supply = <&vcc3v3_d5>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&pfc {
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
new file mode 100644
index 0000000000..5ed2daaca1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -0,0 +1,1625 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V3H (R8A77980) SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <dt-bindings/clock/r8a77980-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77980-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77980";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller {
+			compatible = "cache";
+			power-domains = <&sysc R8A77980_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77980-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 22>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 25>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77980";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77980-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77980-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77980-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77980-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77980-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77980-rst";
+			reg = <0 0xe6160000 0 0x200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77980-sysc";
+			reg = <0 0xe6180000 0 0x440>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77980-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac1 0x9b>, <&dmac1 0x9a>,
+			       <&dmac2 0x9b>, <&dmac2 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x37>, <&dmac1 0x36>,
+			       <&dmac2 0x37>, <&dmac2 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		pcie_phy: pcie-phy@e65d0000 {
+			compatible = "renesas,r8a77980-pcie-phy";
+			reg = <0 0xe65d0000 0 0x8000>;
+			#phy-cells = <0>;
+			clocks = <&cpg CPG_MOD 319>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77980-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A77980_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77980_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77980",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <2000>;
+			iommus = <&ipmmu_ds1 33>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x57>, <&dmac1 0x56>,
+			       <&dmac2 0x57>, <&dmac2 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x59>, <&dmac1 0x58>,
+			       <&dmac2 0x59>, <&dmac2 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77980", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			status = "disabled";
+			renesas,id = <1>;
+			resets = <&cpg 810>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin7>;
+					};
+				};
+			};
+		};
+
+		vin8: video@e6ef8000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef8000 0 0x1000>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			renesas,id = <8>;
+			status = "disabled";
+		};
+
+		vin9: video@e6ef9000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef9000 0 0x1000>;
+			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 627>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 627>;
+			renesas,id = <9>;
+			status = "disabled";
+		};
+
+		vin10: video@e6efa000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efa000 0 0x1000>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 625>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 625>;
+			renesas,id = <10>;
+			status = "disabled";
+		};
+
+		vin11: video@e6efb000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efb000 0 0x1000>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			renesas,id = <11>;
+			status = "disabled";
+		};
+
+		vin12: video@e6efc000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efc000 0 0x1000>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 612>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 612>;
+			renesas,id = <12>;
+			status = "disabled";
+		};
+
+		vin13: video@e6efd000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efd000 0 0x1000>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 608>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 608>;
+			renesas,id = <13>;
+			status = "disabled";
+		};
+
+		vin14: video@e6efe000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efe000 0 0x1000>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 605>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 605>;
+			renesas,id = <14>;
+			status = "disabled";
+		};
+
+		vin15: video@e6eff000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6eff000 0 0x1000>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 604>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 604>;
+			renesas,id = <15>;
+			status = "disabled";
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77980",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77980",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		gether: ethernet@e7400000 {
+			compatible = "renesas,gether-r8a77980";
+			reg = <0 0xe7400000 0 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77980_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: iommu@e7b00000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7b00000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: iommu@e7960000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 11>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77980",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77980_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77980-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(4) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77980",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			phys = <&pcie_phy>;
+			phy-names = "pcie";
+			iommu-map = <0 &ipmmu_vi0 5 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77980-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@feab0000 {
+			compatible = "renesas,r8a77980-csi2";
+			reg = <0 0xfeab0000 0 0x10000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi41vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi41>;
+					};
+					csi41vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi41>;
+					};
+					csi41vin6: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin6csi41>;
+					};
+					csi41vin7: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin7csi41>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77980";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77980-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint =
+							<&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1-passive {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+				sensor1-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2-passive {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+				sensor2-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts
new file mode 100644
index 0000000000..53fc217093
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor-I board on r8a77980A (ES2.0)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77980a.dtsi"
+#include "condor-common.dtsi"
+
+/ {
+	model = "Renesas Condor-I board based on r8a77980A (ES2.0)";
+	compatible = "renesas,condor-i", "renesas,r8a77980a", "renesas,r8a77980";
+};
+
+&mmc0 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980a.dtsi b/arch/arm64/boot/dts/renesas/r8a77980a.dtsi
new file mode 100644
index 0000000000..83f5e21111
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980a.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car V3H2 (R8A77980A) SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+#include "r8a77980.dtsi"
+
+/ {
+	compatible = "renesas,r8a77980a", "renesas,r8a77980";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
new file mode 100644
index 0000000000..9da0fd08f8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Ebisu board with R-Car E3
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77990.dtsi"
+#include "ebisu.dtsi"
+
+/ {
+	model = "Renesas Ebisu board based on r8a77990";
+	compatible = "renesas,ebisu", "renesas,r8a77990";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
new file mode 100644
index 0000000000..4c545eff9b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -0,0 +1,2154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car E3 (R8A77990) SoC
+ *
+ * Copyright (C) 2018-2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a77990-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77990-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77990";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A77990_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77990_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A77990_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77990_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77990-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 11>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 20>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77990";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77990",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77990-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77990-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77990-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77990-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77990-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77990-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77990-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77990";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77990", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6690000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6690000 0 0x40>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1003>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 1003>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77990",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77990-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77990-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77990_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77990",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77990",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77990",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77990-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x5b>, <&dmac0 0x5a>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77990";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77990";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x84>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x84>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x84>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x84>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x84>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x28>;
+			dma-names = "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x84>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x2a>;
+			dma-names = "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x84>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x2c>;
+			dma-names = "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x84>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x2e>;
+			dma-names = "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma0 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma0 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma0 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma0 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77990-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+				 <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+				 <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+				 <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+				 <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+				 <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+				 <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+				 <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77990",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a77990-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77990",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77990_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77990_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77990_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77990-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77990",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		vspb0: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 626>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 631>;
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x7000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x7000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77990-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77990-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77990-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi40>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77990";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+
+			renesas,cmms = <&cmm0>, <&cmm1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77990-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			renesas,companion = <&lvds1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a77990-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
new file mode 100644
index 0000000000..384825617f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Draak board with R-Car D3
+ *
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+/dts-v1/;
+#include "r8a77995.dtsi"
+#include "draak.dtsi"
+
+/ {
+	model = "Renesas Draak board based on r8a77995";
+	compatible = "renesas,draak", "renesas,r8a77995";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
new file mode 100644
index 0000000000..e25024a7b6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -0,0 +1,1473 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car D3 (R8A77995) SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+#include <dt-bindings/clock/r8a77995-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77995-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77995";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77995_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77995_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77995-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 9>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 10>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 21>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 14>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77995";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77995-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77995-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77995-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77995-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77995-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77995-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77995-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77995";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77995", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77995",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77995-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77995-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77995-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77995_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77995",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <1800>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77995",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77995_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77995",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77995_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x64>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x64>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x64>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77995";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
+				 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+			clock-names = "ssi-all",
+				      "ssi.4", "ssi.3",
+				      "src.6", "src.5",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_i";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1011>, <&cpg 1012>;
+			reset-names = "ssi-all",
+				      "ssi.4", "ssi.3";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77995-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+				 <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+				 <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+				 <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+				 <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+				 <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+				 <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+				 <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77995",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77995",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77995_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77995-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vspbs: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 627>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 627>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77995-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77995-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77995";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+
+			renesas,cmms = <&cmm0>, <&cmm1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77995-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			renesas,companion = <&lvds1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a77995-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			cooling-maps {
+			};
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
new file mode 100644
index 0000000000..99b73e21c8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon CPU board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "r8a779a0.dtsi"
+
+/ {
+	model = "Renesas Falcon CPU board";
+	compatible = "renesas,falcon-cpu", "renesas,r8a779a0";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		serial0 = &scif0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW47";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-2 {
+			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW48";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-3 {
+			gpios = <&gpio6 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW49";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+		};
+		led-2 {
+			gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+		};
+		led-3 {
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x80000000>;
+	};
+
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN5";
+		type = "mini";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sn65dsi86_refclk: clk-x6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi0_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bridge@2c {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&mini_dp_con_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	i2c6_pins: i2c6 {
+		groups = "i2c6";
+		function = "i2c6";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	keys_pins: keys {
+		pins = "GP_6_18", "GP_6_19", "GP_6_20";
+		bias-pull-up;
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data", "scif0_ctrl";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0xcc0000>;
+				read-only;
+			};
+			user@cc0000 {
+				reg = <0xcc0000 0x3340000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
new file mode 100644
index 0000000000..dbc8dcab10
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon CSI/DSI sub-board
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include <dt-bindings/media/video-interfaces.h>
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out0>;
+			};
+		};
+	};
+};
+
+&csi42 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi42_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out1>;
+			};
+		};
+	};
+};
+
+&csi43 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi43_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out2>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pca9654_a: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9654_b: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9654_c: gpio@23 {
+		compatible = "onnn,pca9654";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@52 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "csi-dsi-sub-board-id";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	gmsl0: gmsl-deserializer@49 {
+		compatible = "maxim,max96712";
+		reg = <0x49>;
+		enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out0: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4b {
+		compatible = "maxim,max96712";
+		reg = <0x4b>;
+		enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out1: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					lane-polarities = <0 0 0 0 1>;
+					remote-endpoint = <&csi42_in>;
+				};
+			};
+		};
+	};
+
+	gmsl2: gmsl-deserializer@6b {
+		compatible = "maxim,max96712";
+		reg = <0x6b>;
+		enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out2: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					lane-polarities = <0 0 0 0 1>;
+					remote-endpoint = <&csi43_in>;
+				};
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&isp2 {
+	status = "okay";
+};
+
+&isp3 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
+
+&vin16 {
+	status = "okay";
+};
+
+&vin17 {
+	status = "okay";
+};
+
+&vin18 {
+	status = "okay";
+};
+
+&vin19 {
+	status = "okay";
+};
+
+&vin20 {
+	status = "okay";
+};
+
+&vin21 {
+	status = "okay";
+};
+
+&vin22 {
+	status = "okay";
+};
+
+&vin23 {
+	status = "okay";
+};
+
+&vin24 {
+	status = "okay";
+};
+
+&vin25 {
+	status = "okay";
+};
+
+&vin26 {
+	status = "okay";
+};
+
+&vin27 {
+	status = "okay";
+};
+
+&vin28 {
+	status = "okay";
+};
+
+&vin29 {
+	status = "okay";
+};
+
+&vin30 {
+	status = "okay";
+};
+
+&vin31 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi
new file mode 100644
index 0000000000..e11bf9ace7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon Ethernet sub-board
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+&i2c0 {
+	eeprom@53 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "ethernet-sub-board-id";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
new file mode 100644
index 0000000000..63db822e5f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon CPU and BreakOut boards with R-Car V3U
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779a0-falcon-cpu.dtsi"
+#include "r8a779a0-falcon-csi-dsi.dtsi"
+#include "r8a779a0-falcon-ethernet.dtsi"
+
+/ {
+	model = "Renesas Falcon CPU and Breakout boards based on r8a779a0";
+	compatible = "renesas,falcon-breakout", "renesas,falcon-cpu", "renesas,r8a779a0";
+
+	aliases {
+		ethernet0 = &avb0;
+	};
+};
+
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	eeprom@51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
+
+&pfc {
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins_mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins_mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+
+	};
+
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	canfd1_pins: canfd1 {
+		groups = "canfd1_data";
+		function = "canfd1";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
new file mode 100644
index 0000000000..4e67a03564
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -0,0 +1,2915 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V3U (R8A779A0) SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a779a0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a779a0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a76_0: cpu@0 {
+			compatible = "arm,cortex-a76";
+			reg = <0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779A0_PD_A1E0D0C0>;
+			next-level-cache = <&L3_CA76_0>;
+			clocks = <&cpg CPG_CORE R8A779A0_CLK_Z0>;
+		};
+
+		L3_CA76_0: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779A0_PD_A2E0D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a779a0-wdt",
+				     "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+			status = "disabled";
+		};
+
+		pfc: pinctrl@e6050000 {
+			compatible = "renesas,pfc-r8a779a0";
+			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
+			      <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>,
+			      <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>,
+			      <0 0xe6068000 0 0x16c>, <0 0xe6068800 0 0x16c>,
+			      <0 0xe6069000 0 0x16c>, <0 0xe6069800 0 0x16c>;
+		};
+
+		gpio0: gpio@e6058180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058180 0 0x54>;
+			interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 0 28>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@e6050180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050180 0 0x54>;
+			interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 32 31>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@e6050980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050980 0 0x54>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 64 25>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@e6058980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058980 0 0x54>;
+			interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 96 17>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@e6060180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060180 0 0x54>;
+			interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 128 27>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@e6060980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060980 0 0x54>;
+			interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 160 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@e6068180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6068180 0 0x54>;
+			interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 192 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio@e6068980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6068980 0 0x54>;
+			interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 224 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio@e6069180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6069180 0 0x54>;
+			interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 256 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio9: gpio@e6069980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6069980 0 0x54>;
+			interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 288 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779a0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779a0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779a0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779a0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a779a0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x4000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a779a0-rst";
+			reg = <0 0xe6160000 0 0x4000>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a779a0-sysc";
+			reg = <0 0xe6180000 0 0x4000>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6190000 {
+			compatible = "renesas,r8a779a0-thermal";
+			reg = <0 0xe6190000 0 0x200>,
+			      <0 0xe6198000 0 0x200>,
+			      <0 0xe61a0000 0 0x200>,
+			      <0 0xe61a8000 0 0x200>,
+			      <0 0xe61b0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779a0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779A0_CLK_CP>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 521>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 521>;
+			dmas = <&dmac1 0x97>, <&dmac1 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			dmas = <&dmac1 0x99>, <&dmac1 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			dmas = <&dmac1 0x9b>, <&dmac1 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 524>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 524>;
+			dmas = <&dmac1 0x9d>, <&dmac1 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a779a0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a779a0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a779a0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a779a0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x37>, <&dmac1 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		canfd: can@e6660000 {
+			compatible = "renesas,r8a779a0-canfd",
+				     "renesas,rcar-gen4-canfd";
+			reg = <0 0xe6660000 0 0x8000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 328>,
+				 <&cpg CPG_CORE R8A779A0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A779A0_CLK_CANFD>;
+			assigned-clock-rates = <80000000>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+
+			channel2 {
+				status = "disabled";
+			};
+
+			channel3 {
+				status = "disabled";
+			};
+
+			channel4 {
+				status = "disabled";
+			};
+
+			channel5 {
+				status = "disabled";
+			};
+
+			channel6 {
+				status = "disabled";
+			};
+
+			channel7 {
+				status = "disabled";
+			};
+		};
+
+		avb0: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 211>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb1: ethernet@e6810000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6810000 0 0x800>;
+			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 212>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 212>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb2: ethernet@e6820000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6820000 0 0x1000>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19",
+					"ch20", "ch21", "ch22", "ch23",
+					"ch24";
+			clocks = <&cpg CPG_MOD 213>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 213>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb3: ethernet@e6830000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6830000 0 0x1000>;
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19",
+					"ch20", "ch21", "ch22", "ch23",
+					"ch24";
+			clocks = <&cpg CPG_MOD 214>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 214>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb4: ethernet@e6840000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6840000 0 0x1000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19",
+					"ch20", "ch21", "ch22", "ch23",
+					"ch24";
+			clocks = <&cpg CPG_MOD 215>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 215>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb5: ethernet@e6850000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6850000 0 0x1000>;
+			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19",
+					"ch20", "ch21", "ch22", "ch23",
+					"ch24";
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a779a0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a779a0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779a0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x57>, <&dmac1 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a779a0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x59>, <&dmac1 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a779a0", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 619>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 619>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 620>;
+			dmas = <&dmac1 0x45>, <&dmac1 0x44>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+			dmas = <&dmac1 0x47>, <&dmac1 0x46>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof4: spi@e6c20000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c20000 0 0x0064>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			dmas = <&dmac1 0x49>, <&dmac1 0x48>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof5: spi@e6c28000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c28000 0 0x0064>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			dmas = <&dmac1 0x4b>, <&dmac1 0x4a>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin00: video@e6ef0000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 730>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 730>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin00isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin00>;
+					};
+				};
+			};
+		};
+
+		vin01: video@e6ef1000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 731>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 731>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin01isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin01>;
+					};
+				};
+			};
+		};
+
+		vin02: video@e6ef2000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 800>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 800>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin02isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin02>;
+					};
+				};
+			};
+		};
+
+		vin03: video@e6ef3000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 801>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 801>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin03isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin03>;
+					};
+				};
+			};
+		};
+
+		vin04: video@e6ef4000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin04isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin04>;
+					};
+				};
+			};
+		};
+
+		vin05: video@e6ef5000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 803>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 803>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin05isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin05>;
+					};
+				};
+			};
+		};
+
+		vin06: video@e6ef6000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin06isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin06>;
+					};
+				};
+			};
+		};
+
+		vin07: video@e6ef7000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin07isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin07>;
+					};
+				};
+			};
+		};
+
+		vin08: video@e6ef8000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef8000 0 0x1000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <8>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin08isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin08>;
+					};
+				};
+			};
+		};
+
+		vin09: video@e6ef9000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef9000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <9>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin09isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin09>;
+					};
+				};
+			};
+		};
+
+		vin10: video@e6efa000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efa000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <10>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin10isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin10>;
+					};
+				};
+			};
+		};
+
+		vin11: video@e6efb000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efb000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <11>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin11isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin11>;
+					};
+				};
+			};
+		};
+
+		vin12: video@e6efc000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efc000 0 0x1000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <12>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin12isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin12>;
+					};
+				};
+			};
+		};
+
+		vin13: video@e6efd000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efd000 0 0x1000>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <13>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin13isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin13>;
+					};
+				};
+			};
+		};
+
+		vin14: video@e6efe000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efe000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			renesas,id = <14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin14isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin14>;
+					};
+				};
+			};
+		};
+
+		vin15: video@e6eff000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6eff000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			renesas,id = <15>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin15isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin15>;
+					};
+				};
+			};
+		};
+
+		vin16: video@e6ed0000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed0000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 814>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 814>;
+			renesas,id = <16>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin16isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin16>;
+					};
+				};
+			};
+		};
+
+		vin17: video@e6ed1000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed1000 0 0x1000>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			renesas,id = <17>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin17isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin17>;
+					};
+				};
+			};
+		};
+
+		vin18: video@e6ed2000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed2000 0 0x1000>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 816>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 816>;
+			renesas,id = <18>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin18isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin18>;
+					};
+				};
+			};
+		};
+
+		vin19: video@e6ed3000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed3000 0 0x1000>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 817>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 817>;
+			renesas,id = <19>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin19isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin19>;
+					};
+				};
+			};
+		};
+
+		vin20: video@e6ed4000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed4000 0 0x1000>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 818>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 818>;
+			renesas,id = <20>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin20isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin20>;
+					};
+				};
+			};
+		};
+
+		vin21: video@e6ed5000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed5000 0 0x1000>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 819>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 819>;
+			renesas,id = <21>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin21isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin21>;
+					};
+				};
+			};
+		};
+
+		vin22: video@e6ed6000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed6000 0 0x1000>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 820>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 820>;
+			renesas,id = <22>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin22isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin22>;
+					};
+				};
+			};
+		};
+
+		vin23: video@e6ed7000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed7000 0 0x1000>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 821>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 821>;
+			renesas,id = <23>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin23isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin23>;
+					};
+				};
+			};
+		};
+
+		vin24: video@e6ed8000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed8000 0 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 822>;
+			renesas,id = <24>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin24isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin24>;
+					};
+				};
+			};
+		};
+
+		vin25: video@e6ed9000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed9000 0 0x1000>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 823>;
+			renesas,id = <25>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin25isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin25>;
+					};
+				};
+			};
+		};
+
+		vin26: video@e6eda000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6eda000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 824>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 824>;
+			renesas,id = <26>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin26isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin26>;
+					};
+				};
+			};
+		};
+
+		vin27: video@e6edb000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6edb000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 825>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 825>;
+			renesas,id = <27>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin27isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin27>;
+					};
+				};
+			};
+		};
+
+		vin28: video@e6edc000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6edc000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 826>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 826>;
+			renesas,id = <28>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin28isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin28>;
+					};
+				};
+			};
+		};
+
+		vin29: video@e6edd000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6edd000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 827>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 827>;
+			renesas,id = <29>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin29isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin29>;
+					};
+				};
+			};
+		};
+
+		vin30: video@e6ede000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ede000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 828>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 828>;
+			renesas,id = <30>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin30isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin30>;
+					};
+				};
+			};
+		};
+
+		vin31: video@e6edf000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6edf000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 829>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 829>;
+			renesas,id = <31>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin31isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin31>;
+					};
+				};
+			};
+		};
+
+		dmac1: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779a0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac2: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779a0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779a0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779A0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779a0-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ipmmu_rt0: iommu@ee480000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee480000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt1: iommu@ee4c0000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee4c0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds0: iommu@eed00000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@eed40000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@eed80000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@eedc0000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeedc0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@eee80000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@eeec0000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeeec0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_3dg: iommu@eee00000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: iommu@eef00000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: iommu@eef40000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@eefc0000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeefc0000 0 0x20000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		gic: interrupt-controller@f1000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1000000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x110000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		fcpvd0: fcp@fea10000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea10000 0 0x200>;
+			clocks = <&cpg CPG_MOD 508>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+		};
+
+		fcpvd1: fcp@fea11000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea11000 0 0x200>;
+			clocks = <&cpg CPG_MOD 509>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 830>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 830>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 831>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 831>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a779a0-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi40isp0: endpoint {
+						remote-endpoint = <&isp0csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@feab0000 {
+			compatible = "renesas,r8a779a0-csi2";
+			reg = <0 0xfeab0000 0 0x10000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 400>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 400>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi41isp1: endpoint {
+						remote-endpoint = <&isp1csi41>;
+					};
+				};
+			};
+		};
+
+		csi42: csi2@fed60000 {
+			compatible = "renesas,r8a779a0-csi2";
+			reg = <0 0xfed60000 0 0x10000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 401>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 401>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi42isp2: endpoint {
+						remote-endpoint = <&isp2csi42>;
+					};
+				};
+			};
+		};
+
+		csi43: csi2@fed70000 {
+			compatible = "renesas,r8a779a0-csi2";
+			reg = <0 0xfed70000 0 0x10000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi43isp3: endpoint {
+						remote-endpoint = <&isp3csi43>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a779a0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 411>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 411>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi0: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_dsi1: endpoint {
+						remote-endpoint = <&dsi1_in>;
+					};
+				};
+			};
+		};
+
+		isp0: isp@fed00000 {
+			compatible = "renesas,r8a779a0-isp";
+			reg = <0 0xfed00000 0 0x10000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 612>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+			resets = <&cpg 612>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp0csi40: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi40isp0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp0vin00: endpoint {
+						remote-endpoint = <&vin00isp0>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp0vin01: endpoint {
+						remote-endpoint = <&vin01isp0>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp0vin02: endpoint {
+						remote-endpoint = <&vin02isp0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp0vin03: endpoint {
+						remote-endpoint = <&vin03isp0>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp0vin04: endpoint {
+						remote-endpoint = <&vin04isp0>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp0vin05: endpoint {
+						remote-endpoint = <&vin05isp0>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp0vin06: endpoint {
+						remote-endpoint = <&vin06isp0>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp0vin07: endpoint {
+						remote-endpoint = <&vin07isp0>;
+					};
+				};
+			};
+		};
+
+		isp1: isp@fed20000 {
+			compatible = "renesas,r8a779a0-isp";
+			reg = <0 0xfed20000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+			resets = <&cpg 613>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp1csi41: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&csi41isp1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp1vin08: endpoint {
+						remote-endpoint = <&vin08isp1>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp1vin09: endpoint {
+						remote-endpoint = <&vin09isp1>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp1vin10: endpoint {
+						remote-endpoint = <&vin10isp1>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp1vin11: endpoint {
+						remote-endpoint = <&vin11isp1>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp1vin12: endpoint {
+						remote-endpoint = <&vin12isp1>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp1vin13: endpoint {
+						remote-endpoint = <&vin13isp1>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp1vin14: endpoint {
+						remote-endpoint = <&vin14isp1>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp1vin15: endpoint {
+						remote-endpoint = <&vin15isp1>;
+					};
+				};
+			};
+		};
+
+		isp2: isp@fed30000 {
+			compatible = "renesas,r8a779a0-isp";
+			reg = <0 0xfed30000 0 0x10000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+			resets = <&cpg 614>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp2csi42: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi42isp2>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp2vin16: endpoint {
+						remote-endpoint = <&vin16isp2>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp2vin17: endpoint {
+						remote-endpoint = <&vin17isp2>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp2vin18: endpoint {
+						remote-endpoint = <&vin18isp2>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp2vin19: endpoint {
+						remote-endpoint = <&vin19isp2>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp2vin20: endpoint {
+						remote-endpoint = <&vin20isp2>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp2vin21: endpoint {
+						remote-endpoint = <&vin21isp2>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp2vin22: endpoint {
+						remote-endpoint = <&vin22isp2>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp2vin23: endpoint {
+						remote-endpoint = <&vin23isp2>;
+					};
+				};
+			};
+		};
+
+		isp3: isp@fed40000 {
+			compatible = "renesas,r8a779a0-isp";
+			reg = <0 0xfed40000 0 0x10000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+			resets = <&cpg 615>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp3csi43: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&csi43isp3>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp3vin24: endpoint {
+						remote-endpoint = <&vin24isp3>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp3vin25: endpoint {
+						remote-endpoint = <&vin25isp3>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp3vin26: endpoint {
+						remote-endpoint = <&vin26isp3>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp3vin27: endpoint {
+						remote-endpoint = <&vin27isp3>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp3vin28: endpoint {
+						remote-endpoint = <&vin28isp3>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp3vin29: endpoint {
+						remote-endpoint = <&vin29isp3>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp3vin30: endpoint {
+						remote-endpoint = <&vin30isp3>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp3vin31: endpoint {
+						remote-endpoint = <&vin31isp3>;
+					};
+				};
+			};
+		};
+
+		dsi0: dsi-encoder@fed80000 {
+			compatible = "renesas,r8a779a0-dsi-csi2-tx";
+			reg = <0 0xfed80000 0 0x10000>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 415>,
+				 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+				 <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>;
+			clock-names = "fck", "dsi", "pll";
+			resets = <&cpg 415>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&du_out_dsi0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		dsi1: dsi-encoder@fed90000 {
+			compatible = "renesas,r8a779a0-dsi-csi2-tx";
+			reg = <0 0xfed90000 0 0x10000>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 416>,
+				 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+				 <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>;
+			clock-names = "fck", "dsi", "pll";
+			resets = <&cpg 416>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi1_in: endpoint {
+						remote-endpoint = <&du_out_dsi1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor4_thermal: sensor4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 3>;
+
+			trips {
+				sensor4_crit: sensor4-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor5_thermal: sensor5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 4>;
+
+			trips {
+				sensor5_crit: sensor5-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
new file mode 100644
index 0000000000..5cbde8e8fc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Spider CPU board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "r8a779f0.dtsi"
+
+/ {
+	model = "Renesas Spider CPU board";
+	compatible = "renesas,spider-cpu", "renesas,r8a779f0";
+
+	aliases {
+		serial0 = &hscif0;
+		serial1 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:1843200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-7 {
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <7>;
+		};
+
+		led-8 {
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <8>;
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	rc21012_ufs: clk-rc21012-ufs {
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+		#clock-cells = <0>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gpio_exp_20: gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+/*
+ * This board also has a microSD slot which we will not support upstream
+ * because we cannot directly switch voltages in software.
+ */
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data", "scif0_ctrl";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
+
+&ufs {
+	status = "okay";
+};
+
+&ufs30_clk {
+	compatible = "gpio-gate-clock";
+	clocks = <&rc21012_ufs>;
+	enable-gpios = <&gpio_exp_20 4 GPIO_ACTIVE_LOW>;
+	/delete-property/ clock-frequency;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
new file mode 100644
index 0000000000..33c1015e9a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Spider Ethernet sub-board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+&eth_serdes {
+	status = "okay";
+};
+
+&i2c4 {
+	eeprom@52 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "ethernet-sub-board";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+};
+
+&pfc {
+	tsn0_pins: tsn0 {
+		groups = "tsn0_mdio_b", "tsn0_link_b";
+		function = "tsn0";
+		power-source = <1800>;
+	};
+
+	tsn1_pins: tsn1 {
+		groups = "tsn1_mdio_b", "tsn1_link_b";
+		function = "tsn1";
+		power-source = <1800>;
+	};
+
+	tsn2_pins: tsn2 {
+		groups = "tsn2_mdio_b", "tsn2_link_b";
+		function = "tsn2";
+		power-source = <1800>;
+	};
+};
+
+&rswitch {
+	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>, <&tsn2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			phy-handle = <&u101>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u101: ethernet-phy@1 {
+					reg = <1>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+		port@1 {
+			reg = <1>;
+			phy-handle = <&u201>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u201: ethernet-phy@2 {
+					reg = <2>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+		port@2 {
+			reg = <2>;
+			phy-handle = <&u301>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 2>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u301: ethernet-phy@3 {
+					reg = <3>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts
new file mode 100644
index 0000000000..f139cc4feb
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Spider CPU and BreakOut boards
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779f0-spider-cpu.dtsi"
+#include "r8a779f0-spider-ethernet.dtsi"
+
+/ {
+	model = "Renesas Spider CPU and Breakout boards based on r8a779f0";
+	compatible = "renesas,spider-breakout", "renesas,spider-cpu", "renesas,r8a779f0";
+};
+
+&i2c4 {
+	eeprom@51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
new file mode 100644
index 0000000000..ecdd5a523f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -0,0 +1,1193 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car S4-8 (R8A779F0) SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a779f0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a779f0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster01_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+			opp-suspend;
+		};
+	};
+
+	cluster23_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a55_0>;
+				};
+				core1 {
+					cpu = <&a55_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a55_2>;
+				};
+				core1 {
+					cpu = <&a55_3>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&a55_4>;
+				};
+				core1 {
+					cpu = <&a55_5>;
+				};
+			};
+
+			cluster3 {
+				core0 {
+					cpu = <&a55_6>;
+				};
+				core1 {
+					cpu = <&a55_7>;
+				};
+			};
+		};
+
+		a55_0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E0D0C0>;
+			next-level-cache = <&L3_CA55_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+			operating-points-v2 = <&cluster01_opp>;
+		};
+
+		a55_1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E0D0C1>;
+			next-level-cache = <&L3_CA55_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+			operating-points-v2 = <&cluster01_opp>;
+		};
+
+		a55_2: cpu@10000 {
+			compatible = "arm,cortex-a55";
+			reg = <0x10000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E0D1C0>;
+			next-level-cache = <&L3_CA55_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+			operating-points-v2 = <&cluster01_opp>;
+		};
+
+		a55_3: cpu@10100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x10100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E0D1C1>;
+			next-level-cache = <&L3_CA55_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+			operating-points-v2 = <&cluster01_opp>;
+		};
+
+		a55_4: cpu@20000 {
+			compatible = "arm,cortex-a55";
+			reg = <0x20000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E1D0C0>;
+			next-level-cache = <&L3_CA55_2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+			operating-points-v2 = <&cluster23_opp>;
+		};
+
+		a55_5: cpu@20100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x20100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E1D0C1>;
+			next-level-cache = <&L3_CA55_2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+			operating-points-v2 = <&cluster23_opp>;
+		};
+
+		a55_6: cpu@30000 {
+			compatible = "arm,cortex-a55";
+			reg = <0x30000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E1D1C0>;
+			next-level-cache = <&L3_CA55_3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+			operating-points-v2 = <&cluster23_opp>;
+		};
+
+		a55_7: cpu@30100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x30100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E1D1C1>;
+			next-level-cache = <&L3_CA55_3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+			operating-points-v2 = <&cluster23_opp>;
+		};
+
+		L3_CA55_0: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779F0_PD_A2E0D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA55_1: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779F0_PD_A2E0D1>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA55_2: cache-controller-2 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779F0_PD_A2E1D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA55_3: cache-controller-3 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779F0_PD_A2E1D1>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a779f0-wdt",
+				     "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+			status = "disabled";
+		};
+
+		pfc: pinctrl@e6050000 {
+			compatible = "renesas,pfc-r8a779f0";
+			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
+			      <0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>;
+		};
+
+		gpio0: gpio@e6050180 {
+			compatible = "renesas,gpio-r8a779f0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050180 0 0x54>;
+			interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 0 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@e6050980 {
+			compatible = "renesas,gpio-r8a779f0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050980 0 0x54>;
+			interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 32 25>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@e6051180 {
+			compatible = "renesas,gpio-r8a779f0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6051180 0 0x54>;
+			interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 64 17>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@e6051980 {
+			compatible = "renesas,gpio-r8a779f0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6051980 0 0x54>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 96 19>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779f0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779f0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779f0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779f0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a779f0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x4000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a779f0-rst";
+			reg = <0 0xe6160000 0 0x4000>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a779f0-sysc";
+			reg = <0 0xe6180000 0 0x4000>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a779f0-thermal";
+			/* The 4th sensor is in control domain and not for Linux */
+			reg = <0 0xe6198000 0 0x200>,
+			      <0 0xe61a0000 0 0x200>,
+			      <0 0xe61a8000 0 0x200>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779f0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_CL16M>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 483 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		eth_serdes: phy@e6444000 {
+			compatible = "renesas,r8a779f0-ether-serdes";
+			reg = <0 0xe6444000 0 0x2800>;
+			clocks = <&cpg CPG_MOD 1506>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1506>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			dmas = <&dmac0 0x91>, <&dmac0 0x90>,
+			       <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			dmas = <&dmac0 0x93>, <&dmac0 0x92>,
+			       <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			dmas = <&dmac0 0x95>, <&dmac0 0x94>,
+			       <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 521>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 521>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>,
+			       <&dmac1 0x97>, <&dmac1 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>,
+			       <&dmac1 0x99>, <&dmac1 0x98>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>,
+			       <&dmac1 0x9b>, <&dmac1 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a779f0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
+			       <&dmac1 0x31>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a779f0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
+			       <&dmac1 0x33>, <&dmac1 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a779f0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
+			       <&dmac1 0x35>, <&dmac1 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a779f0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
+			       <&dmac1 0x37>, <&dmac1 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		ufs: ufs@e6860000 {
+			compatible = "renesas,r8a779f0-ufs";
+			reg = <0 0xe6860000 0 0x100>;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+			clock-names = "fck", "ref_clk";
+			freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1514>;
+			status = "disabled";
+		};
+
+		rswitch: ethernet@e6880000 {
+			compatible = "renesas,r8a779f0-ether-switch";
+			reg = <0 0xe6880000 0 0x20000>, <0 0xe68c0000 0 0x20000>;
+			reg-names = "base", "secure_base";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mfwd_error", "race_error",
+					  "coma_error", "gwca0_error",
+					  "gwca1_error", "etha0_error",
+					  "etha1_error", "etha2_error",
+					  "gptp0_status", "gptp1_status",
+					  "mfwd_status", "race_status",
+					  "coma_status", "gwca0_status",
+					  "gwca1_status", "etha0_status",
+					  "etha1_status", "etha2_status",
+					  "rmac0_status", "rmac1_status",
+					  "rmac2_status",
+					  "gwca0_rxtx0", "gwca0_rxtx1",
+					  "gwca0_rxtx2", "gwca0_rxtx3",
+					  "gwca0_rxtx4", "gwca0_rxtx5",
+					  "gwca0_rxtx6", "gwca0_rxtx7",
+					  "gwca1_rxtx0", "gwca1_rxtx1",
+					  "gwca1_rxtx2", "gwca1_rxtx3",
+					  "gwca1_rxtx4", "gwca1_rxtx5",
+					  "gwca1_rxtx6", "gwca1_rxtx7",
+					  "gwca0_rxts0", "gwca0_rxts1",
+					  "gwca1_rxts0", "gwca1_rxts1",
+					  "rmac0_mdio", "rmac1_mdio",
+					  "rmac2_mdio",
+					  "rmac0_phy", "rmac1_phy",
+					  "rmac2_phy";
+			clocks = <&cpg CPG_MOD 1505>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1505>;
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phys = <&eth_serdes 0>;
+				};
+				port@1 {
+					reg = <1>;
+					phys = <&eth_serdes 1>;
+				};
+				port@2 {
+					reg = <2>;
+					phys = <&eth_serdes 2>;
+				};
+			};
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a779f0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
+			       <&dmac1 0x51>, <&dmac1 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a779f0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
+			       <&dmac1 0x53>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779f0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
+			       <&dmac1 0x57>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a779f0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
+			       <&dmac1 0x59>, <&dmac1 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a779f0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x40>,
+			       <&dmac1 0x41>, <&dmac1 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a779f0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 619>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>,
+			       <&dmac1 0x43>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 619>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a779f0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>,
+			       <&dmac1 0x45>, <&dmac1 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 620>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a779f0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>,
+			       <&dmac1 0x47>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779f0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779f0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>,
+				 <&ipmmu_ds0 18>, <&ipmmu_ds0 19>,
+				 <&ipmmu_ds0 20>, <&ipmmu_ds0 21>,
+				 <&ipmmu_ds0 22>, <&ipmmu_ds0 23>,
+				 <&ipmmu_ds0 24>, <&ipmmu_ds0 25>,
+				 <&ipmmu_ds0 26>, <&ipmmu_ds0 27>,
+				 <&ipmmu_ds0 28>, <&ipmmu_ds0 29>,
+				 <&ipmmu_ds0 30>, <&ipmmu_ds0 31>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779f0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779F0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		ipmmu_rt0: iommu@ee480000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee480000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt1: iommu@ee4c0000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee4c0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds0: iommu@eed00000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@eed40000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@eefc0000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeefc0000 0 0x20000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		gic: interrupt-controller@f1000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1000000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x110000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal_rtcore: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_apcore0: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_apcore4: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	ufs30_clk: ufs30-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
new file mode 100644
index 0000000000..e6f53377ec
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the White Hawk board with ARD-AUDIO-DA7212 Board
+ *
+ * You can find and buy "ARD-AUDIO-DA7212" at Digi-Key
+ *
+ *	https://www.digikey.jp/en/products/detail/ARD-AUDIO-DA7212/1564-1021-ND/5456357
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ *
+ *
+ * [Connection]
+ *
+ * White Hawk				ARD-AUDIO-DA7212
+ * +----------------------------+
+ * |CPU board			|
+ * |				|
+ * |CN40 (IO PIN HEADER)	|
+ * |	AUDIO_CLKIN_V	  pin1  |<--\	+---------------+
+ * |(*) GP1_25/SL_SW2_V	  pin2  |<--/	|J2		|
+ * |	AUDIO_CLKOUT_V	  pin5  |<----->| pin7  MCLK	|
+ * |	SSI_SCK_V	  pin9  |<----->| pin1  BCLK	|
+ * |	SSI_WS_V	  pin13 |<----->| pin3  WCLK	|
+ * |	SSI_SD_V	  pin15 |<----->| pin5  DATIN	| (@)
+ * |				|   \-->| pin15 DATOUT	| [CAPTURE]
+ * +----------------------------+	+---------------+
+ * +----------------------------+
+ * |Breakout board		|
+ * |				|	+---------------+
+ * |CN34 (I2C CN)		|	|J1		|
+ * |	I2C0_SCL	   pin3 |<----->| pin20 SCL	|
+ * |	I2C0_SDA	   pin5 |<----->| pin18 SDA	|
+ * |				|	+---------------+
+ * |				|	+-----------------------+
+ * |CN4 (Power)		        |	|J7			|
+ * |	3v3 (v)		   pin9 |<----->| pin4  / pin8  3.3v	|
+ * |	GND (v)	    pin3 / pin4 |<----->| pin12 / pin14 GND	|
+ * +----------------------------+	+-----------------------+
+ * (*)	GP1_25/SL_SW2_V is used as TPU
+ * (@)	Connect to pin5 (DATIN = playback) or pin15 (DATOUT = capture)
+ * (v)	These are just sample pins. You can find many 3v3 / GND pins on
+ *	White Hawk board, not only CN4. You can use other pins for it.
+ *
+ * [How to enable]
+ *
+ * You need these configs
+ *
+ *	CONFIG_PWM
+ *	CONFIG_PWM_RENESAS_TPU
+ *	CONFIG_COMMON_CLK_PWM
+ *	CONFIG_SND_SOC_DA7213
+ *
+ * [How to use]
+ *
+ * 44.1kHz groups sound is available by default.
+ * You need to update audio_clkin settings to switch to 48kHz groups sound.
+ * see
+ *	[(C) clock]
+ *
+ * You can use capture if you change the settings
+ * see
+ *	[CAPTURE]
+ *
+ * You need to setup Headphone
+ *
+ *	> amixer set "Headphone" 40%
+ *	> amixer set "Headphone" on
+ *	> amixer set "Mixout Left DAC Left" on
+ *	> amixer set "Mixout Right DAC Right" on
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+
+&{/} {
+	sound_card: sound {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+
+		dais = <&rsnd_port>;	/* DA7212 Audio Codec */
+	};
+
+	tpu_clk: tpu-clk {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+
+		/* 44.1kHz groups [(C) clock] */
+		clock-frequency = <11289600>;
+		pwms = <&tpu 0 88 0>;	/* 1000000000 / 88 =~ 11289600 */
+
+		/* 48  kHz groups [(C) clock] */
+//		clock-frequency = <12288000>;
+//		pwms = <&tpu 0 81 0>;	/* 1000000000 / 81 =~ 12288000 */
+	};
+
+};
+
+&pfc {
+	sound_pins: sound {
+		groups = "ssi_ctrl", "ssi_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clkin", "audio_clkout";
+		function = "audio_clk";
+	};
+
+	tpu0_pins: tpu0 {
+		groups = "tpu_to0_a";
+		function = "tpu";
+	};
+};
+
+&tpu {
+	pinctrl-0 = <&tpu0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	codec@1a {
+		compatible = "dlg,da7212";
+
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+
+		clocks = <&rcar_sound>;
+		clock-names = "mclk";
+
+		dlg,micbias1-lvl = <2500>;
+		dlg,micbias2-lvl = <2500>;
+		dlg,dmic-data-sel = "lrise_rfall";
+		dlg,dmic-samplephase = "between_clkedge";
+		dlg,dmic-clkrate = <3000000>;
+
+		VDDA-supply   = <&reg_1p8v>;
+		VDDMIC-supply = <&reg_3p3v>;
+		VDDIO-supply  = <&reg_3p3v>;
+
+		port {
+			da7212_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout */
+	#clock-cells = <0>;
+	clock-frequency = <5644800>; /* 44.1kHz groups [(C) clock] */
+//	clock-frequency = <6144000>; /* 48  kHz groups [(C) clock] */
+
+	status = "okay";
+
+	/* Update <clkin> to <tpu_clk> */
+	clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&tpu_clk>;
+
+	ports {
+		rsnd_port: port {
+			rsnd_endpoint: endpoint {
+				remote-endpoint = <&da7212_endpoint>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint>;
+				frame-master = <&rsnd_endpoint>;
+
+				/* Mutually exclusive with 'capture' */
+				playback = <&ssi0>;
+				/* [CAPTURE] */
+				/* capture = <&ssi0>; */
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
new file mode 100644
index 0000000000..913f70fe6c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the White Hawk CPU board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include "r8a779g0.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Renesas White Hawk CPU board";
+	compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0";
+
+	aliases {
+		ethernet0 = &avb0;
+		serial0 = &hscif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:921600n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW47";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW48";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW49";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+		};
+
+		led-2 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+		};
+
+		led-3 {
+			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN5";
+		type = "mini";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sn65dsi86_refclk: clk-x6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+};
+
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi0_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander_a: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&mini_dp_con_in>;
+				};
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins_mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins_mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+
+	};
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data";
+		function = "hscif0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	keys_pins: keys {
+		pins = "GP_5_0", "GP_5_1", "GP_5_2";
+		bias-pull-up;
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0x1200000>;
+				read-only;
+			};
+			user@1200000 {
+				reg = <0x1200000 0x2e00000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi
new file mode 100644
index 0000000000..f8537f7ea4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H White Hawk CSI/DSI sub-board
+ *
+ * Copyright (C) 2022 Glider bv
+ */
+
+#include <dt-bindings/media/video-interfaces.h>
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3>;
+				remote-endpoint = <&max96712_out0>;
+			};
+		};
+	};
+};
+
+&csi41 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi41_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3>;
+				remote-endpoint = <&max96712_out1>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pca9654_a: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9654_b: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@52 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "csi-dsi-sub-board-id";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	gmsl0: gmsl-deserializer@49 {
+		compatible = "maxim,max96712";
+		reg = <0x49>;
+		enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out0: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4b {
+		compatible = "maxim,max96712";
+		reg = <0x4b>;
+		enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out1: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3>;
+					remote-endpoint = <&csi41_in>;
+				};
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&isp1 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
+
+&vin08 {
+	status = "okay";
+};
+
+&vin09 {
+	status = "okay";
+};
+
+&vin10 {
+	status = "okay";
+};
+
+&vin11 {
+	status = "okay";
+};
+
+&vin12 {
+	status = "okay";
+};
+
+&vin13 {
+	status = "okay";
+};
+
+&vin14 {
+	status = "okay";
+};
+
+&vin15 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi
new file mode 100644
index 0000000000..4f411f95c6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1)
+ * sub-board
+ *
+ * Copyright (C) 2022 Glider bv
+ */
+
+&i2c0 {
+	eeprom@53 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "ethernet-sub-board-id";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
new file mode 100644
index 0000000000..eff1ef6e2c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the White Hawk CPU and BreakOut boards
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779g0-white-hawk-cpu.dtsi"
+#include "r8a779g0-white-hawk-csi-dsi.dtsi"
+#include "r8a779g0-white-hawk-ethernet.dtsi"
+
+/ {
+	model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0";
+	compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0";
+
+	can_transceiver0: can-phy0 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		max-bitrate = <5000000>;
+	};
+};
+
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+		phys = <&can_transceiver0>;
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	eeprom@51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
+
+&pfc {
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	canfd1_pins: canfd1 {
+		groups = "canfd1_data";
+		function = "canfd1";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
new file mode 100644
index 0000000000..d3d25e077c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -0,0 +1,2349 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H (R8A779G0) SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a779g0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a779g0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* External Audio clock - to be overridden by boards that provide it */
+	audio_clkin: audio_clkin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+			opp-suspend;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a76_0>;
+				};
+				core1 {
+					cpu = <&a76_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a76_2>;
+				};
+				core1 {
+					cpu = <&a76_3>;
+				};
+			};
+		};
+
+		a76_0: cpu@0 {
+			compatible = "arm,cortex-a76";
+			reg = <0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D0C0>;
+			next-level-cache = <&L3_CA76_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_1: cpu@100 {
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D0C1>;
+			next-level-cache = <&L3_CA76_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_2: cpu@10000 {
+			compatible = "arm,cortex-a76";
+			reg = <0x10000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D1C0>;
+			next-level-cache = <&L3_CA76_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_3: cpu@10100 {
+			compatible = "arm,cortex-a76";
+			reg = <0x10100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D1C1>;
+			next-level-cache = <&L3_CA76_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+	       };
+
+		L3_CA76_0: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779G0_PD_A2E0D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA76_1: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779G0_PD_A2E0D1>;
+			cache-unified;
+			cache-level = <3>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a779g0-wdt",
+				     "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+			status = "disabled";
+		};
+
+		pfc: pinctrl@e6050000 {
+			compatible = "renesas,pfc-r8a779g0";
+			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
+			      <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>,
+			      <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>,
+			      <0 0xe6061000 0 0x16c>, <0 0xe6061800 0 0x16c>,
+			      <0 0xe6068000 0 0x16c>;
+		};
+
+		gpio0: gpio@e6050180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050180 0 0x54>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 0 19>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@e6050980 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050980 0 0x54>;
+			interrupts = <GIC_SPI 623 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 32 29>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@e6058180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058180 0 0x54>;
+			interrupts = <GIC_SPI 627 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 64 20>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@e6058980 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058980 0 0x54>;
+			interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 96 30>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@e6060180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060180 0 0x54>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 128 25>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@e6060980 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060980 0 0x54>;
+			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 160 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@e6061180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6061180 0 0x54>;
+			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 192 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio@e6061980 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6061980 0 0x54>;
+			interrupts = <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 224 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio@e6068180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6068180 0 0x54>;
+			interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 256 14>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779g0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a779g0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x4000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a779g0-rst";
+			reg = <0 0xe6160000 0 0x4000>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a779g0-sysc";
+			reg = <0 0xe6180000 0 0x4000>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a779g0-thermal";
+			reg = <0 0xe6198000 0 0x200>,
+			      <0 0xe61a0000 0 0x200>,
+			      <0 0xe61a8000 0 0x200>,
+			      <0 0xe61b0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779g0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>;
+			dmas = <&dmac0 0x91>, <&dmac0 0x90>,
+			       <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>;
+			dmas = <&dmac0 0x93>, <&dmac0 0x92>,
+			       <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>;
+			dmas = <&dmac0 0x95>, <&dmac0 0x94>,
+			       <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 521>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>,
+			       <&dmac1 0x97>, <&dmac1 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 521>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>,
+			       <&dmac1 0x99>, <&dmac1 0x98>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 523>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>,
+			       <&dmac1 0x9b>, <&dmac1 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
+			       <&dmac1 0x31>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
+			       <&dmac1 0x33>, <&dmac1 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
+			       <&dmac1 0x35>, <&dmac1 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
+			       <&dmac1 0x37>, <&dmac1 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		canfd: can@e6660000 {
+			compatible = "renesas,r8a779g0-canfd",
+				     "renesas,rcar-gen4-canfd";
+			reg = <0 0xe6660000 0 0x8500>;
+			interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 328>,
+				 <&cpg CPG_CORE R8A779G0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A779G0_CLK_CANFD>;
+			assigned-clock-rates = <80000000>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+
+			channel2 {
+				status = "disabled";
+			};
+
+			channel3 {
+				status = "disabled";
+			};
+
+			channel4 {
+				status = "disabled";
+			};
+
+			channel5 {
+				status = "disabled";
+			};
+
+			channel6 {
+				status = "disabled";
+			};
+
+			channel7 {
+				status = "disabled";
+			};
+		};
+
+		avb0: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a779g0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15", "ch16", "ch17",
+					  "ch18", "ch19", "ch20", "ch21",
+					  "ch22", "ch23", "ch24";
+			clocks = <&cpg CPG_MOD 211>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb1: ethernet@e6810000 {
+			compatible = "renesas,etheravb-r8a779g0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6810000 0 0x800>;
+			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15", "ch16", "ch17",
+					  "ch18", "ch19", "ch20", "ch21",
+					  "ch22", "ch23", "ch24";
+			clocks = <&cpg CPG_MOD 212>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 212>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb2: ethernet@e6820000 {
+			compatible = "renesas,etheravb-r8a779g0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6820000 0 0x1000>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15", "ch16", "ch17",
+					  "ch18", "ch19", "ch20", "ch21",
+					  "ch22", "ch23", "ch24";
+			clocks = <&cpg CPG_MOD 213>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 213>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@e6e37000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e37000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm8: pwm@e6e38000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e38000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm9: pwm@e6e39000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e39000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
+			       <&dmac1 0x51>, <&dmac1 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
+			       <&dmac1 0x53>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
+			       <&dmac1 0x57>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
+			       <&dmac1 0x59>, <&dmac1 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a779g0", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x40>,
+			       <&dmac1 0x41>, <&dmac1 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 619>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>,
+			       <&dmac1 0x43>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 619>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>,
+			       <&dmac1 0x45>, <&dmac1 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 620>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>,
+			       <&dmac1 0x47>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof4: spi@e6c20000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c20000 0 0x0064>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			dmas = <&dmac0 0x49>, <&dmac0 0x48>,
+			       <&dmac1 0x49>, <&dmac1 0x48>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof5: spi@e6c28000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c28000 0 0x0064>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			dmas = <&dmac0 0x4b>, <&dmac0 0x4a>,
+			       <&dmac1 0x4b>, <&dmac1 0x4a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin00: video@e6ef0000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 730>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 730>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin00isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin00>;
+					};
+				};
+			};
+		};
+
+		vin01: video@e6ef1000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 731>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 731>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin01isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin01>;
+					};
+				};
+			};
+		};
+
+		vin02: video@e6ef2000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 800>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 800>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin02isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin02>;
+					};
+				};
+			};
+		};
+
+		vin03: video@e6ef3000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 801>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 801>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin03isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin03>;
+					};
+				};
+			};
+		};
+
+		vin04: video@e6ef4000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin04isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin04>;
+					};
+				};
+			};
+		};
+
+		vin05: video@e6ef5000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 803>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 803>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin05isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin05>;
+					};
+				};
+			};
+		};
+
+		vin06: video@e6ef6000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin06isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin06>;
+					};
+				};
+			};
+		};
+
+		vin07: video@e6ef7000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin07isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin07>;
+					};
+				};
+			};
+		};
+
+		vin08: video@e6ef8000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef8000 0 0x1000>;
+			interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <8>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin08isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin08>;
+					};
+				};
+			};
+		};
+
+		vin09: video@e6ef9000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef9000 0 0x1000>;
+			interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <9>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin09isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin09>;
+					};
+				};
+			};
+		};
+
+		vin10: video@e6efa000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efa000 0 0x1000>;
+			interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <10>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin10isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin10>;
+					};
+				};
+			};
+		};
+
+		vin11: video@e6efb000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efb000 0 0x1000>;
+			interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <11>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin11isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin11>;
+					};
+				};
+			};
+		};
+
+		vin12: video@e6efc000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efc000 0 0x1000>;
+			interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <12>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin12isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin12>;
+					};
+				};
+			};
+		};
+
+		vin13: video@e6efd000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efd000 0 0x1000>;
+			interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <13>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin13isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin13>;
+					};
+				};
+			};
+		};
+
+		vin14: video@e6efe000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efe000 0 0x1000>;
+			interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			renesas,id = <14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin14isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin14>;
+					};
+				};
+			};
+		};
+
+		vin15: video@e6eff000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6eff000 0 0x1000>;
+			interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			renesas,id = <15>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin15isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin15>;
+					};
+				};
+			};
+		};
+
+		dmac0: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779g0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779g0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>,
+				 <&ipmmu_ds0 18>, <&ipmmu_ds0 19>,
+				 <&ipmmu_ds0 20>, <&ipmmu_ds0 21>,
+				 <&ipmmu_ds0 22>, <&ipmmu_ds0 23>,
+				 <&ipmmu_ds0 24>, <&ipmmu_ds0 25>,
+				 <&ipmmu_ds0 26>, <&ipmmu_ds0 27>,
+				 <&ipmmu_ds0 28>, <&ipmmu_ds0 29>,
+				 <&ipmmu_ds0 30>, <&ipmmu_ds0 31>;
+		};
+
+		rcar_sound: sound@ec5a0000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required
+			 *
+			 * clkout		: #clock-cells = <0>;	<&rcar_sound>;
+			 * audio_clkout0/1/2/3	: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a779g0", "renesas,rcar_sound-gen4";
+			reg = <0 0xec5a0000 0 0x020>,
+			      <0 0xec540000 0 0x1000>,
+			      <0 0xec541000 0 0x050>,
+			      <0 0xec400000 0 0x40000>;
+			reg-names = "adg", "ssiu", "ssi", "sdmc";
+
+			clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&audio_clkin>;
+			clock-names = "ssiu.0", "ssi.0", "clkin";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 2926>, <&cpg 2927>;
+			reset-names = "ssiu.0", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&dmac0 0x6e>, <&dmac0 0x6f>;
+					dma-names = "tx", "rx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&dmac0 0x6c>, <&dmac0 0x6d>;
+					dma-names = "tx", "rx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&dmac0 0x6a>, <&dmac0 0x6b>;
+					dma-names = "tx", "rx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&dmac0 0x68>, <&dmac0 0x69>;
+					dma-names = "tx", "rx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&dmac0 0x66>, <&dmac0 0x67>;
+					dma-names = "tx", "rx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&dmac0 0x64>, <&dmac0 0x65>;
+					dma-names = "tx", "rx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&dmac0 0x62>, <&dmac0 0x63>;
+					dma-names = "tx", "rx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&dmac0 0x60>, <&dmac0 0x61>;
+					dma-names = "tx", "rx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		ipmmu_rt0: iommu@ee480000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee480000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt1: iommu@ee4c0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee4c0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds0: iommu@eed00000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@eed40000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@eed80000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc: iommu@eedc0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeedc0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_3dg: iommu@eee00000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@eee80000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@eeec0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeeec0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: iommu@eef00000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: iommu@eef40000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@eefc0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeefc0000 0 0x20000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779g0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779g0-rpc-if",
+				     "renesas,rcar-gen4-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1000000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x110000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		csi40: csi2@fe500000 {
+			compatible = "renesas,r8a779g0-csi2";
+			reg = <0 0xfe500000 0 0x40000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi40isp0: endpoint {
+						remote-endpoint = <&isp0csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@fe540000 {
+			compatible = "renesas,r8a779g0-csi2";
+			reg = <0 0xfe540000 0 0x40000>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 400>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 400>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi41isp1: endpoint {
+						remote-endpoint = <&isp1csi41>;
+					};
+				};
+			};
+		};
+
+		fcpvd0: fcp@fea10000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea10000 0 0x200>;
+			clocks = <&cpg CPG_MOD 508>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+		};
+
+		fcpvd1: fcp@fea11000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea11000 0 0x200>;
+			clocks = <&cpg CPG_MOD 509>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x7000>;
+			interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 830>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 830>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x7000>;
+			interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 831>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 831>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a779g0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 411>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 411>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi0: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_dsi1: endpoint {
+						remote-endpoint = <&dsi1_in>;
+					};
+				};
+			};
+		};
+
+		isp0: isp@fed00000 {
+			compatible = "renesas,r8a779g0-isp";
+			reg = <0 0xfed00000 0 0x10000>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cpg CPG_MOD 612>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP0>;
+			resets = <&cpg 612>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp0csi40: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi40isp0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp0vin00: endpoint {
+						remote-endpoint = <&vin00isp0>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp0vin01: endpoint {
+						remote-endpoint = <&vin01isp0>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp0vin02: endpoint {
+						remote-endpoint = <&vin02isp0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp0vin03: endpoint {
+						remote-endpoint = <&vin03isp0>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp0vin04: endpoint {
+						remote-endpoint = <&vin04isp0>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp0vin05: endpoint {
+						remote-endpoint = <&vin05isp0>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp0vin06: endpoint {
+						remote-endpoint = <&vin06isp0>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp0vin07: endpoint {
+						remote-endpoint = <&vin07isp0>;
+					};
+				};
+			};
+		};
+
+		isp1: isp@fed20000 {
+			compatible = "renesas,r8a779g0-isp";
+			reg = <0 0xfed20000 0 0x10000>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP1>;
+			resets = <&cpg 613>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp1csi41: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&csi41isp1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp1vin08: endpoint {
+						remote-endpoint = <&vin08isp1>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp1vin09: endpoint {
+						remote-endpoint = <&vin09isp1>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp1vin10: endpoint {
+						remote-endpoint = <&vin10isp1>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp1vin11: endpoint {
+						remote-endpoint = <&vin11isp1>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp1vin12: endpoint {
+						remote-endpoint = <&vin12isp1>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp1vin13: endpoint {
+						remote-endpoint = <&vin13isp1>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp1vin14: endpoint {
+						remote-endpoint = <&vin14isp1>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp1vin15: endpoint {
+						remote-endpoint = <&vin15isp1>;
+					};
+				};
+			};
+		};
+
+		dsi0: dsi-encoder@fed80000 {
+			compatible = "renesas,r8a779g0-dsi-csi2-tx";
+			reg = <0 0xfed80000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 415>,
+				 <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>,
+				 <&cpg CPG_CORE R8A779G0_CLK_DSIREF>;
+			clock-names = "fck", "dsi", "pll";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 415>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&du_out_dsi0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		dsi1: dsi-encoder@fed90000 {
+			compatible = "renesas,r8a779g0-dsi-csi2-tx";
+			reg = <0 0xfed90000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 416>,
+				 <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>,
+				 <&cpg CPG_CORE R8A779G0_CLK_DSIREF>;
+			clock-names = "fck", "dsi", "pll";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 416>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi1_in: endpoint {
+						remote-endpoint = <&du_out_dsi1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal_cr52: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_cnn: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_ca76: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_ddr1: sensor4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 3>;
+
+			trips {
+				sensor4_crit: sensor4-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m0.dtsi b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi
new file mode 100644
index 0000000000..38978360e7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car H3e (R8A779M0) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m0", "renesas,r8a7795";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts
new file mode 100644
index 0000000000..74b0ac04ff
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-salvator-xs.dts
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m1.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m1";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m1",
+		     "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts
new file mode 100644
index 0000000000..d2089e1d71
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb-kf.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a779m1-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas H3ULCB Kingfisher board based on r8a779m1";
+	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
+		     "renesas,r8a779m1", "renesas,r8a7795";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts
new file mode 100644
index 0000000000..705ea047ef
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb.dts
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a779m1.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas H3ULCB board based on r8a779m1";
+	compatible = "renesas,h3ulcb", "renesas,r8a779m1", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 4>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi
new file mode 100644
index 0000000000..be0219defe
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car H3e-2G (R8A779M1) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m1", "renesas,r8a7795";
+};
+
+&cluster0_opp {
+	opp-1700000000 {
+		/delete-property/ turbo-mode;
+	};
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <960000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m2.dtsi b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi
new file mode 100644
index 0000000000..bced12764c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car M3e (R8A779M2) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77961.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m2", "renesas,r8a77961";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
new file mode 100644
index 0000000000..e53a6e88cc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-salvator-xs.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m3.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m3";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m3",
+		     "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts
new file mode 100644
index 0000000000..587e8764bc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb-kf.dts
+ * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com>
+ */
+
+#include "r8a779m3-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3ULCB Kingfisher board based on r8a779m3";
+	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
+		     "renesas,r8a779m3", "renesas,r8a77961";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts
new file mode 100644
index 0000000000..413f000b46
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb.dts
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m3.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a779m3";
+	compatible = "renesas,m3ulcb", "renesas,r8a779m3", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi
new file mode 100644
index 0000000000..ffde141137
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car M3e-2G (R8A779M3) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77961.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m3", "renesas,r8a77961";
+};
+
+&cluster0_opp {
+	opp-1800000000 {
+		/delete-property/ turbo-mode;
+	};
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <960000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m4.dtsi b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi
new file mode 100644
index 0000000000..ae84860569
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car M3Ne (R8A779M4) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77965.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m4", "renesas,r8a77965";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts
new file mode 100644
index 0000000000..6efc23171a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3Ne-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77965-salvator-xs.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m5.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m5";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m5",
+		     "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
new file mode 100644
index 0000000000..aded03ad31
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car M3Ne-2G (R8A779M5) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77965.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m5", "renesas,r8a77965";
+};
+
+&cluster0_opp {
+	opp-1800000000 {
+		/delete-property/ turbo-mode;
+	};
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <960000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m6.dtsi b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi
new file mode 100644
index 0000000000..94d6a6cf50
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car E3e (R8A779M6) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77990.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m6", "renesas,r8a77990";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m7.dtsi b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi
new file mode 100644
index 0000000000..0580fa6140
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car D3e (R8A779M7) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77995.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m7", "renesas,r8a77995";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m8.dtsi b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi
new file mode 100644
index 0000000000..dfccc080fb
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car H3Ne (R8A779M8) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m8", "renesas,r8a7795";
+};
+
+&cluster0_opp {
+	/delete-node/ opp-1600000000;
+	/delete-node/ opp-1700000000;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779mb.dtsi b/arch/arm64/boot/dts/renesas/r8a779mb.dtsi
new file mode 100644
index 0000000000..181b737c91
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779mb.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car H3Ne-1.7G (R8A779MB) SoC
+ *
+ * Copyright (C) 2022 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779mb", "renesas,r8a7795";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso
new file mode 100644
index 0000000000..4edd103c77
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/{G2UL, Five} SMARC EVK PMOD parts
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ *
+ *
+ * [Connection]
+ *
+ * SMARC EVK
+ * +----------------------------+
+ * |CN7 (PMOD1 PIN HEADER)      |
+ * |	SCI0_TXD	  pin7  |
+ * |	SCI0_RXD	  pin8  |
+ * |	Gnd		  pin11 |
+ * |	Vcc		  pin12 |
+ * +----------------------------+
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	can0-stb-hog {
+		status = "disabled";
+	};
+
+	can1-stb-hog {
+		status = "disabled";
+	};
+
+	sci0_pins: sci0-pins {
+		pinmux = <RZG2L_PORT_PINMUX(2, 2, 5)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(2, 3, 5)>; /* RxD */
+	};
+};
+
+&sci0 {
+	pinctrl-0 = <&sci0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
new file mode 100644
index 0000000000..8721f4c9fa
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
@@ -0,0 +1,911 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five and RZ/G2UL SoCs
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r9a07g043-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g043";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	audio_clk1: audio1-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	audio_clk2: audio2-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mtu3: timer@10001200 {
+			compatible = "renesas,r9a07g043-mtu3",
+				     "renesas,rz-mtu3";
+			reg = <0 0x10001200 0 0xb00>;
+			interrupts = <SOC_PERIPHERAL_IRQ(170) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(171) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(172) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(173) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(174) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(175) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(176) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(177) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(178) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(179) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(180) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(181) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(182) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(183) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(184) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(185) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(186) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(187) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(188) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(189) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(190) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(191) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(192) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(193) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(194) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(195) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(196) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(197) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(198) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(199) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(200) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(201) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(202) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(203) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(204) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(205) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(206) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(207) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(208) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(209) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(210) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(211) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(212) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(213) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
+					  "tciv0", "tgie0", "tgif0",
+					  "tgia1", "tgib1", "tciv1", "tciu1",
+					  "tgia2", "tgib2", "tciv2", "tciu2",
+					  "tgia3", "tgib3", "tgic3", "tgid3",
+					  "tciv3",
+					  "tgia4", "tgib4", "tgic4", "tgid4",
+					  "tciv4",
+					  "tgiu5", "tgiv5", "tgiw5",
+					  "tgia6", "tgib6", "tgic6", "tgid6",
+					  "tciv6",
+					  "tgia7", "tgib7", "tgic7", "tgid7",
+					  "tciv7",
+					  "tgia8", "tgib8", "tgic8", "tgid8",
+					  "tciv8", "tciu8";
+			clocks = <&cpg CPG_MOD R9A07G043_MTU_X_MCK_MTU3>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_MTU_X_PRESET_MTU3>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		ssi0: ssi@10049c00 {
+			compatible = "renesas,r9a07g043-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x10049c00 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(326) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(327) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G043_SSI0_RST_M2_REG>;
+			dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi1: ssi@1004a000 {
+			compatible = "renesas,r9a07g043-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(330) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(331) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G043_SSI1_RST_M2_REG>;
+			dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi2: ssi@1004a400 {
+			compatible = "renesas,r9a07g043-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(334) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(337) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rt";
+			clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G043_SSI2_RST_M2_REG>;
+			dmas = <&dmac 0x265f>;
+			dma-names = "rt";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi3: ssi@1004a800 {
+			compatible = "renesas,r9a07g043-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a800 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(338) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(339) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G043_SSI3_RST_M2_REG>;
+			dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1004ac00 {
+			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004ac00 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(415) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(413) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(414) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>;
+			resets = <&cpg R9A07G043_RSPI0_RST>;
+			dmas = <&dmac 0x2e95>, <&dmac 0x2e96>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@1004b000 {
+			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(418) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(416) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(417) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>;
+			resets = <&cpg R9A07G043_RSPI1_RST>;
+			dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@1004b400 {
+			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(421) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(419) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(420) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>;
+			resets = <&cpg R9A07G043_RSPI2_RST>;
+			dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(380) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(382) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(383) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(381) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(385) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(387) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(388) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(386) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(390) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(392) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(393) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(391) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(395) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(397) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(398) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(396) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(400) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(402) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(403) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(401) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		sci0: serial@1004d000 {
+			compatible = "renesas,r9a07g043-sci", "renesas,sci";
+			reg = <0 0x1004d000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(405) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(406) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(407) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(408) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCI0_RST>;
+			status = "disabled";
+		};
+
+		sci1: serial@1004d400 {
+			compatible = "renesas,r9a07g043-sci", "renesas,sci";
+			reg = <0 0x1004d400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(409) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(410) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(411) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(412) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCI1_RST>;
+			status = "disabled";
+		};
+
+		canfd: can@10050000 {
+			compatible = "renesas,r9a07g043-canfd", "renesas,rzg2l-canfd";
+			reg = <0 0x10050000 0 0x8000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(426) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(427) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(422) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(424) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(428) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(423) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(425) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(429) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g_err", "g_recc",
+					  "ch0_err", "ch0_rec", "ch0_trx",
+					  "ch1_err", "ch1_rec", "ch1_trx";
+			clocks = <&cpg CPG_MOD R9A07G043_CANFD_PCLK>,
+				 <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>;
+			assigned-clock-rates = <50000000>;
+			resets = <&cpg R9A07G043_CANFD_RSTP_N>,
+				 <&cpg R9A07G043_CANFD_RSTC_N>;
+			reset-names = "rstp_n", "rstc_n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		i2c0: i2c@10058000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+			reg = <0 0x10058000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(350) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(348) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(349) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(352) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(353) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(351) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(354) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(355) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G043_I2C0_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G043_I2C0_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10058400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+			reg = <0 0x10058400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(358) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(356) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(357) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(360) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(361) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(359) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(362) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(363) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G043_I2C1_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G043_I2C1_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10058800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+			reg = <0 0x10058800 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(366) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(364) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(365) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(368) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(369) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(367) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(370) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(371) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G043_I2C2_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G043_I2C2_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@10058c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+			reg = <0 0x10058c00 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(374) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(372) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(373) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(376) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(377) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(375) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(378) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(379) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G043_I2C3_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G043_I2C3_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		adc: adc@10059000 {
+			compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc";
+			reg = <0 0x10059000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(347) IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G043_ADC_ADCLK>,
+				 <&cpg CPG_MOD R9A07G043_ADC_PCLK>;
+			clock-names = "adclk", "pclk";
+			resets = <&cpg R9A07G043_ADC_PRESETN>,
+				 <&cpg R9A07G043_ADC_ADRST_N>;
+			reset-names = "presetn", "adrst-n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				reg = <0>;
+			};
+			channel@1 {
+				reg = <1>;
+			};
+		};
+
+		tsu: thermal@10059400 {
+			compatible = "renesas,r9a07g043-tsu",
+				     "renesas,rzg2l-tsu";
+			reg = <0 0x10059400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G043_TSU_PCLK>;
+			resets = <&cpg R9A07G043_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		sbc: spi@10060000 {
+			compatible = "renesas,r9a07g043-rpc-if",
+				     "renesas,rzg2l-rpc-if";
+			reg = <0 0x10060000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>,
+			      <0 0x10070000 0 0x10000>;
+			reg-names = "regs", "dirmap", "wbuf";
+			clocks = <&cpg CPG_MOD R9A07G043_SPI_CLK2>,
+				 <&cpg CPG_MOD R9A07G043_SPI_CLK>;
+			resets = <&cpg R9A07G043_SPI_RST>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g043-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g043-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g043-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 152>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_GPIO_RSTN>,
+				 <&cpg R9A07G043_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G043_GPIO_SPARE_RESETN>;
+		};
+
+		dmac: dma-controller@11820000 {
+			compatible = "renesas,r9a07g043-dmac",
+				     "renesas,rz-dmac";
+			reg = <0 0x11820000 0 0x10000>,
+			      <0 0x11830000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(141) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(125) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(126) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(127) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(128) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(129) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(130) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(131) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(132) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(133) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(134) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(135) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(136) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(137) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(138) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(139) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(140) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD R9A07G043_DMAC_ACLK>,
+				 <&cpg CPG_MOD R9A07G043_DMAC_PCLK>;
+			clock-names = "main", "register";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_DMAC_ARESETN>,
+				 <&cpg R9A07G043_DMAC_RST_ASYNC>;
+			reset-names = "arst", "rst_async";
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		sdhi0: mmc@11c00000 {
+			compatible = "renesas,sdhi-r9a07g043",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c00000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(104) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(105) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK>,
+				 <&cpg CPG_MOD R9A07G043_SDHI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SDHI0_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G043_SDHI0_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@11c10000 {
+			compatible = "renesas,sdhi-r9a07g043",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c10000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(106) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(107) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK>,
+				 <&cpg CPG_MOD R9A07G043_SDHI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SDHI1_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G043_SDHI1_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@11c20000 {
+			compatible = "renesas,r9a07g043-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c20000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(84) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(85) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(86) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G043_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G043_ETH0_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G043_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G043_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c30000 {
+			compatible = "renesas,r9a07g043-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(87) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(88) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(89) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G043_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G043_ETH1_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G043_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G043_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		phyrst: usbphy-ctrl@11c40000 {
+			compatible = "renesas,r9a07g043-usbphy-ctrl",
+				     "renesas,rzg2l-usbphy-ctrl";
+			reg = <0 0x11c40000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>;
+			resets = <&cpg R9A07G043_USB_PRESETN>;
+			power-domains = <&cpg>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		ohci0: usb@11c50000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c50000 0 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(91) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G043_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@11c70000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c70000 0 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(96) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G043_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@11c50100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c50100 0 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G043_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@11c70100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c70100 0 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(97) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G043_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			compatible = "renesas,usb2-phy-r9a07g043",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c50200 0 0x700>;
+			interrupts = <SOC_PERIPHERAL_IRQ(94) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			compatible = "renesas,usb2-phy-r9a07g043",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c70200 0 0x700>;
+			interrupts = <SOC_PERIPHERAL_IRQ(99) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@11c60000 {
+			compatible = "renesas,usbhs-r9a07g043",
+				     "renesas,rza2-usbhs";
+			reg = <0 0x11c60000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(100) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(101) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(102) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(103) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2P_EXR_CPUCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G043_USB_U2P_EXL_SYSRST>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@12800800 {
+			compatible = "renesas,r9a07g043-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800800 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G043_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <SOC_PERIPHERAL_IRQ(49) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(50) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G043_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm0: timer@12801000 {
+			compatible = "renesas,r9a07g043-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801000 0x0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G043_OSTM0_PCLK>;
+			resets = <&cpg R9A07G043_OSTM0_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@12801400 {
+			compatible = "renesas,r9a07g043-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801400 0x0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(47) IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G043_OSTM1_PCLK>;
+			resets = <&cpg R9A07G043_OSTM1_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@12801800 {
+			compatible = "renesas,r9a07g043-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801800 0x0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(48) IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G043_OSTM2_PCLK>;
+			resets = <&cpg R9A07G043_OSTM2_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsu 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor_crit: sensor-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				target: trip-point {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
new file mode 100644
index 0000000000..2ab231572d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#define SOC_PERIPHERAL_IRQ(nr)		GIC_SPI nr
+
+#include "r9a07g043.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-level = <3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	interrupt-parent = <&irqc>;
+};
+
+&soc {
+	interrupt-parent = <&gic>;
+
+	irqc: interrupt-controller@110a0000 {
+		compatible = "renesas,r9a07g043u-irqc",
+			     "renesas,rzg2l-irqc";
+		reg = <0 0x110a0000 0 0x10000>;
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		interrupt-controller;
+		interrupts = <SOC_PERIPHERAL_IRQ(0) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(1) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(4) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(5) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(6) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(7) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(8) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(444) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(445) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(446) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(447) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(448) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(449) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(450) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(451) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(452) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(453) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(454) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(455) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(456) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(457) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(458) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(459) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(460) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(461) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(462) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(463) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(464) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(465) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(466) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(467) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(468) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(469) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(470) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(471) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(472) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "nmi",
+				  "irq0", "irq1", "irq2", "irq3",
+				  "irq4", "irq5", "irq6", "irq7",
+				  "tint0", "tint1", "tint2", "tint3",
+				  "tint4", "tint5", "tint6", "tint7",
+				  "tint8", "tint9", "tint10", "tint11",
+				  "tint12", "tint13", "tint14", "tint15",
+				  "tint16", "tint17", "tint18", "tint19",
+				  "tint20", "tint21", "tint22", "tint23",
+				  "tint24", "tint25", "tint26", "tint27",
+				  "tint28", "tint29", "tint30", "tint31",
+				  "bus-err";
+		clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>,
+			<&cpg CPG_MOD R9A07G043_IA55_PCLK>;
+		clock-names = "clk", "pclk";
+		power-domains = <&cpg>;
+		resets = <&cpg R9A07G043_IA55_RESETN>;
+	};
+
+	gic: interrupt-controller@11900000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x11900000 0 0x40000>,
+		      <0x0 0x11940000 0 0x60000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&sysc {
+	interrupts = <SOC_PERIPHERAL_IRQ(42) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(43) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(44) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(45) IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "lpm_int", "ca55stbydone_int",
+			  "cm33stbyr_int", "ca55_deny";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
new file mode 100644
index 0000000000..8e0107df2d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(0: uSD; 1: eMMC)
+ * SW1-3 : SW_ET0_EN_N		(0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
+ * Please change below macros according to SW1 setting on the SoM
+ */
+#define SW_SW0_DEV_SEL	1
+#define SW_ET0_EN_N	1
+
+/*
+ * To enable MTU3a PWM on PMOD0,
+ *  - Set DIP-Switch SW1-3 to On position.
+ *  - Set PMOD_MTU3 macro to 1.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && !SW_ET0_EN_N)
+#error "Cannot set as both PMOD_MTU3 and !SW_ET0_EN_N are mutually exclusive"
+#endif
+
+#include "r9a07g043u.dtsi"
+#include "rzg2ul-smarc-som.dtsi"
+#include "rzg2ul-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g043u11";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
new file mode 100644
index 0000000000..66f68fc2b2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -0,0 +1,1273 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g044-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g044";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	audio_clk1: audio1-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	audio_clk2: audio2-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-level = <3>;
+		};
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-62500000 {
+			opp-hz = /bits/ 64 <62500000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <1100000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mtu3: timer@10001200 {
+			compatible = "renesas,r9a07g044-mtu3",
+				     "renesas,rz-mtu3";
+			reg = <0 0x10001200 0 0xb00>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
+					  "tciv0", "tgie0", "tgif0",
+					  "tgia1", "tgib1", "tciv1", "tciu1",
+					  "tgia2", "tgib2", "tciv2", "tciu2",
+					  "tgia3", "tgib3", "tgic3", "tgid3",
+					  "tciv3",
+					  "tgia4", "tgib4", "tgic4", "tgid4",
+					  "tciv4",
+					  "tgiu5", "tgiv5", "tgiw5",
+					  "tgia6", "tgib6", "tgic6", "tgid6",
+					  "tciv6",
+					  "tgia7", "tgib7", "tgic7", "tgid7",
+					  "tciv7",
+					  "tgia8", "tgib8", "tgic8", "tgid8",
+					  "tciv8", "tciu8";
+			clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		ssi0: ssi@10049c00 {
+			compatible = "renesas,r9a07g044-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x10049c00 0 0x400>;
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
+			dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi1: ssi@1004a000 {
+			compatible = "renesas,r9a07g044-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a000 0 0x400>;
+			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G044_SSI1_RST_M2_REG>;
+			dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi2: ssi@1004a400 {
+			compatible = "renesas,r9a07g044-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a400 0 0x400>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rt";
+			clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G044_SSI2_RST_M2_REG>;
+			dmas = <&dmac 0x265f>;
+			dma-names = "rt";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi3: ssi@1004a800 {
+			compatible = "renesas,r9a07g044-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a800 0 0x400>;
+			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G044_SSI3_RST_M2_REG>;
+			dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1004ac00 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004ac00 0 0x400>;
+			interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>;
+			resets = <&cpg R9A07G044_RSPI0_RST>;
+			dmas = <&dmac 0x2e95>, <&dmac 0x2e96>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@1004b000 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b000 0 0x400>;
+			interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>;
+			resets = <&cpg R9A07G044_RSPI1_RST>;
+			dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@1004b400 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b400 0 0x400>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>;
+			resets = <&cpg R9A07G044_RSPI2_RST>;
+			dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		sci0: serial@1004d000 {
+			compatible = "renesas,r9a07g044-sci", "renesas,sci";
+			reg = <0 0x1004d000 0 0x400>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCI0_RST>;
+			status = "disabled";
+		};
+
+		sci1: serial@1004d400 {
+			compatible = "renesas,r9a07g044-sci", "renesas,sci";
+			reg = <0 0x1004d400 0 0x400>;
+			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCI1_RST>;
+			status = "disabled";
+		};
+
+		canfd: can@10050000 {
+			compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd";
+			reg = <0 0x10050000 0 0x8000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g_err", "g_recc",
+					  "ch0_err", "ch0_rec", "ch0_trx",
+					  "ch1_err", "ch1_rec", "ch1_trx";
+			clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>,
+				 <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>;
+			assigned-clock-rates = <50000000>;
+			resets = <&cpg R9A07G044_CANFD_RSTP_N>,
+				 <&cpg R9A07G044_CANFD_RSTC_N>;
+			reset-names = "rstp_n", "rstc_n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		i2c0: i2c@10058000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+			reg = <0 0x10058000 0 0x400>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G044_I2C0_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10058400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+			reg = <0 0x10058400 0 0x400>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G044_I2C1_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10058800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+			reg = <0 0x10058800 0 0x400>;
+			interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G044_I2C2_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@10058c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+			reg = <0 0x10058c00 0 0x400>;
+			interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G044_I2C3_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		adc: adc@10059000 {
+			compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
+			reg = <0 0x10059000 0 0x400>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>,
+				 <&cpg CPG_MOD R9A07G044_ADC_PCLK>;
+			clock-names = "adclk", "pclk";
+			resets = <&cpg R9A07G044_ADC_PRESETN>,
+				 <&cpg R9A07G044_ADC_ADRST_N>;
+			reset-names = "presetn", "adrst-n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				reg = <0>;
+			};
+			channel@1 {
+				reg = <1>;
+			};
+			channel@2 {
+				reg = <2>;
+			};
+			channel@3 {
+				reg = <3>;
+			};
+			channel@4 {
+				reg = <4>;
+			};
+			channel@5 {
+				reg = <5>;
+			};
+			channel@6 {
+				reg = <6>;
+			};
+			channel@7 {
+				reg = <7>;
+			};
+		};
+
+		tsu: thermal@10059400 {
+			compatible = "renesas,r9a07g044-tsu",
+				     "renesas,rzg2l-tsu";
+			reg = <0 0x10059400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+			resets = <&cpg R9A07G044_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		sbc: spi@10060000 {
+			compatible = "renesas,r9a07g044-rpc-if",
+				     "renesas,rzg2l-rpc-if";
+			reg = <0 0x10060000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>,
+			      <0 0x10070000 0 0x10000>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>,
+				 <&cpg CPG_MOD R9A07G044_SPI_CLK>;
+			resets = <&cpg R9A07G044_SPI_RST>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cru: video@10830000 {
+			compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+			reg = <0 0x10830000 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+			clock-names = "video", "apb", "axi";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+			resets = <&cpg R9A07G044_CRU_PRESETN>,
+				 <&cpg R9A07G044_CRU_ARESETN>;
+			reset-names = "presetn", "aresetn";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+					cruparallel: endpoint@0 {
+						reg = <0>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+					crucsi2: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi2cru>;
+					};
+				};
+			};
+		};
+
+		csi2: csi2@10830400 {
+			compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+			reg = <0 0x10830400 0 0xfc00>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+			clock-names = "system", "video", "apb";
+			resets = <&cpg R9A07G044_CRU_PRESETN>,
+				 <&cpg R9A07G044_CRU_CMN_RSTB>;
+			reset-names = "presetn", "cmn-rstb";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					csi2cru: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&crucsi2>;
+					};
+				};
+			};
+		};
+
+		dsi: dsi@10850000 {
+			compatible = "renesas,r9a07g044-mipi-dsi",
+				     "renesas,rzg2l-mipi-dsi";
+			reg = <0 0x10850000 0 0x20000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "seq0", "seq1", "vin1", "rcv",
+					  "ferr", "ppi", "debug";
+			clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+			clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+			resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+				 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+				 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+			reset-names = "rst", "arst", "prst";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		vspd: vsp@10870000 {
+			compatible = "renesas,r9a07g044-vsp2";
+			reg = <0 0x10870000 0 0x10000>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_LCDC_RESET_N>;
+			renesas,fcp = <&fcpvd>;
+		};
+
+		fcpvd: fcp@10880000 {
+			compatible = "renesas,r9a07g044-fcpvd",
+				     "renesas,fcpv";
+			reg = <0 0x10880000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_LCDC_RESET_N>;
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g044-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g044-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpm_int", "ca55stbydone_int",
+					  "cm33stbyr_int", "ca55_deny";
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g044-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&irqc>;
+			interrupt-controller;
+			gpio-ranges = <&pinctrl 0 0 392>;
+			clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_GPIO_RSTN>,
+				 <&cpg R9A07G044_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G044_GPIO_SPARE_RESETN>;
+		};
+
+		irqc: interrupt-controller@110a0000 {
+			compatible = "renesas,r9a07g044-irqc",
+				     "renesas,rzg2l-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0x110a0000 0 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+				 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+			clock-names = "clk", "pclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_IA55_RESETN>;
+		};
+
+		dmac: dma-controller@11820000 {
+			compatible = "renesas,r9a07g044-dmac",
+				     "renesas,rz-dmac";
+			reg = <0 0x11820000 0 0x10000>,
+			      <0 0x11830000 0 0x10000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
+				 <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+			clock-names = "main", "register";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_DMAC_ARESETN>,
+				 <&cpg R9A07G044_DMAC_RST_ASYNC>;
+			reset-names = "arst", "rst_async";
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		gpu: gpu@11840000 {
+			compatible = "renesas,r9a07g044-mali",
+				     "arm,mali-bifrost";
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			clocks = <&cpg CPG_MOD R9A07G044_GPU_CLK>,
+				 <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>,
+				 <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>;
+			clock-names = "gpu", "bus", "bus_ace";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_GPU_RESETN>,
+				 <&cpg R9A07G044_GPU_AXI_RESETN>,
+				 <&cpg R9A07G044_GPU_ACE_RESETN>;
+			reset-names = "rst", "axi_rst", "ace_rst";
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		gic: interrupt-controller@11900000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x11900000 0 0x40000>,
+			      <0x0 0x11940000 0 0x60000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		sdhi0: mmc@11c00000 {
+			compatible = "renesas,sdhi-r9a07g044",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c00000 0 0x10000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>,
+				 <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G044_SDHI0_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@11c10000 {
+			compatible = "renesas,sdhi-r9a07g044",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c10000 0 0x10000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>,
+				 <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G044_SDHI1_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@11c20000 {
+			compatible = "renesas,r9a07g044-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c20000 0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G044_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G044_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c30000 {
+			compatible = "renesas,r9a07g044-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G044_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G044_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		phyrst: usbphy-ctrl@11c40000 {
+			compatible = "renesas,r9a07g044-usbphy-ctrl",
+				     "renesas,rzg2l-usbphy-ctrl";
+			reg = <0 0x11c40000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+			resets = <&cpg R9A07G044_USB_PRESETN>;
+			power-domains = <&cpg>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		ohci0: usb@11c50000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c50000 0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G044_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@11c70000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c70000 0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G044_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@11c50100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c50100 0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G044_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@11c70100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c70100 0 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G044_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			compatible = "renesas,usb2-phy-r9a07g044",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c50200 0 0x700>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			compatible = "renesas,usb2-phy-r9a07g044",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c70200 0 0x700>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@11c60000 {
+			compatible = "renesas,usbhs-r9a07g044",
+				     "renesas,rza2-usbhs";
+			reg = <0 0x11c60000 0 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G044_USB_U2P_EXL_SYSRST>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@12800800 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800800 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@12800c00 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800C00 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT1_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT1_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm0: timer@12801000 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801000 0x0 0x400>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>;
+			resets = <&cpg R9A07G044_OSTM0_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@12801400 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801400 0x0 0x400>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>;
+			resets = <&cpg R9A07G044_OSTM1_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@12801800 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801800 0x0 0x400>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>;
+			resets = <&cpg R9A07G044_OSTM2_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsu 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor_crit: sensor-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				target: trip-point {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
new file mode 100644
index 0000000000..56a979e82c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC R9A07G044C1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044c1", "renesas,r9a07g044";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+};
+
+&soc {
+	/delete-node/ ssi@1004a800;
+	/delete-node/ serial@1004c800;
+	/delete-node/ adc@10059000;
+	/delete-node/ ethernet@11c30000;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso
new file mode 100644
index 0000000000..f983bdd3ea
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/G2LC SMARC EVK with
+ * OV5645 camera connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+	enable-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&pinctrl RZG2L_GPIO(5, 2) GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
new file mode 100644
index 0000000000..0b90367b6d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting on SoM
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(1: eMMC; 0: uSD)
+ * SW1-3 : SW_SCIF_CAN		(1: CAN1; 0: SCIF1)
+ * SW1-4 : SW_RSPI_CAN		(1: CAN1; 0: RSPI1)
+ * SW1-5 : SW_I2S0_I2S1		(1: I2S2 (HDMI audio); 0: I2S0)
+ * Please change below macros according to SW1 setting
+ */
+
+#define SW_SD0_DEV_SEL	1
+
+#define SW_SCIF_CAN	0
+#if (SW_SCIF_CAN)
+/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
+#define SW_RSPI_CAN	0
+#else
+/* Please set SW_RSPI_CAN. Default value is 1 */
+#define SW_RSPI_CAN	1
+#endif
+
+#if (SW_SCIF_CAN && SW_RSPI_CAN)
+#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
+#endif
+
+/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
+/*
+ * To enable MTU3a PWM on PMOD0,
+ *  - Set DIP-Switch SW1-4 to Off position.
+ *  - Set SW_RSPI_CAN macro to 0.
+ *  - Set PMOD_MTU3 macro to 1.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && SW_RSPI_CAN)
+#error "Cannot set as both PMOD_MTU3 and SW_RSPI_CAN are mutually exclusive"
+#endif
+
+#include "r9a07g044c2.dtsi"
+#include "rzg2lc-smarc-som.dtsi"
+#include "rzg2lc-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g044c2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi
new file mode 100644
index 0000000000..7bb8917fe4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC R9A07G044C2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044c2", "renesas,r9a07g044";
+};
+
+&soc {
+	/delete-node/ ssi@1004a800;
+	/delete-node/ serial@1004c800;
+	/delete-node/ adc@10059000;
+	/delete-node/ ethernet@11c30000;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
new file mode 100644
index 0000000000..9cf27ca9f1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L R9A07G044L1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044l1", "renesas,r9a07g044";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso
new file mode 100644
index 0000000000..736c1e688c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/{G2L, V2L} SMARC EVK with OV5645 camera
+ * connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+	enable-gpios = <&pinctrl RZG2L_GPIO(2, 0) GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&pinctrl RZG2L_GPIO(40, 2) GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
new file mode 100644
index 0000000000..568d49cfe4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/* Enable SCIF2 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
+/*
+ * To enable MTU3a PWM on PMOD0,
+ * Disable PMOD1_SER0 by setting "#define PMOD1_SER0	0" above and
+ * enable PMOD_MTU3 by setting "#define PMOD_MTU3	1" below.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && PMOD1_SER0)
+#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive "
+#endif
+
+#define MTU3_COUNTER_Z_PHASE_SIGNAL	0
+
+#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL)
+#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
+#endif
+
+#include "r9a07g044l2.dtsi"
+#include "rzg2l-smarc-som.dtsi"
+#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g044l2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
new file mode 100644
index 0000000000..91dc10b2cd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044l2", "renesas,r9a07g044";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
new file mode 100644
index 0000000000..1f1d481dc7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -0,0 +1,1280 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g054-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g054";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	audio_clk1: audio1-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	audio_clk2: audio2-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-level = <3>;
+		};
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-62500000 {
+			opp-hz = /bits/ 64 <62500000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <1100000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mtu3: timer@10001200 {
+			compatible = "renesas,r9a07g054-mtu3",
+				     "renesas,rz-mtu3";
+			reg = <0 0x10001200 0 0xb00>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
+					  "tciv0", "tgie0", "tgif0",
+					  "tgia1", "tgib1", "tciv1", "tciu1",
+					  "tgia2", "tgib2", "tciv2", "tciu2",
+					  "tgia3", "tgib3", "tgic3", "tgid3",
+					  "tciv3",
+					  "tgia4", "tgib4", "tgic4", "tgid4",
+					  "tciv4",
+					  "tgiu5", "tgiv5", "tgiw5",
+					  "tgia6", "tgib6", "tgic6", "tgid6",
+					  "tciv6",
+					  "tgia7", "tgib7", "tgic7", "tgid7",
+					  "tciv7",
+					  "tgia8", "tgib8", "tgic8", "tgid8",
+					  "tciv8", "tciu8";
+			clocks = <&cpg CPG_MOD R9A07G054_MTU_X_MCK_MTU3>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_MTU_X_PRESET_MTU3>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		ssi0: ssi@10049c00 {
+			compatible = "renesas,r9a07g054-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x10049c00 0 0x400>;
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G054_SSI0_RST_M2_REG>;
+			dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi1: ssi@1004a000 {
+			compatible = "renesas,r9a07g054-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a000 0 0x400>;
+			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G054_SSI1_RST_M2_REG>;
+			dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi2: ssi@1004a400 {
+			compatible = "renesas,r9a07g054-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a400 0 0x400>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rt";
+			clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G054_SSI2_RST_M2_REG>;
+			dmas = <&dmac 0x265f>;
+			dma-names = "rt";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi3: ssi@1004a800 {
+			compatible = "renesas,r9a07g054-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a800 0 0x400>;
+			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G054_SSI3_RST_M2_REG>;
+			dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1004ac00 {
+			compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004ac00 0 0x400>;
+			interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G054_RSPI0_CLKB>;
+			resets = <&cpg R9A07G054_RSPI0_RST>;
+			dmas = <&dmac 0x2e95>, <&dmac 0x2e96>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@1004b000 {
+			compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b000 0 0x400>;
+			interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G054_RSPI1_CLKB>;
+			resets = <&cpg R9A07G054_RSPI1_RST>;
+			dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@1004b400 {
+			compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b400 0 0x400>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G054_RSPI2_CLKB>;
+			resets = <&cpg R9A07G054_RSPI2_RST>;
+			dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		sci0: serial@1004d000 {
+			compatible = "renesas,r9a07g054-sci", "renesas,sci";
+			reg = <0 0x1004d000 0 0x400>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCI0_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCI0_RST>;
+			status = "disabled";
+		};
+
+		sci1: serial@1004d400 {
+			compatible = "renesas,r9a07g054-sci", "renesas,sci";
+			reg = <0 0x1004d400 0 0x400>;
+			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCI1_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCI1_RST>;
+			status = "disabled";
+		};
+
+		canfd: can@10050000 {
+			compatible = "renesas,r9a07g054-canfd", "renesas,rzg2l-canfd";
+			reg = <0 0x10050000 0 0x8000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g_err", "g_recc",
+					  "ch0_err", "ch0_rec", "ch0_trx",
+					  "ch1_err", "ch1_rec", "ch1_trx";
+			clocks = <&cpg CPG_MOD R9A07G054_CANFD_PCLK>,
+				 <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>;
+			assigned-clock-rates = <50000000>;
+			resets = <&cpg R9A07G054_CANFD_RSTP_N>,
+				 <&cpg R9A07G054_CANFD_RSTC_N>;
+			reset-names = "rstp_n", "rstc_n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		i2c0: i2c@10058000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
+			reg = <0 0x10058000 0 0x400>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G054_I2C0_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G054_I2C0_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10058400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
+			reg = <0 0x10058400 0 0x400>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G054_I2C1_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G054_I2C1_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10058800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
+			reg = <0 0x10058800 0 0x400>;
+			interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G054_I2C2_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G054_I2C2_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@10058c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
+			reg = <0 0x10058c00 0 0x400>;
+			interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G054_I2C3_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G054_I2C3_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		adc: adc@10059000 {
+			compatible = "renesas,r9a07g054-adc", "renesas,rzg2l-adc";
+			reg = <0 0x10059000 0 0x400>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G054_ADC_ADCLK>,
+				 <&cpg CPG_MOD R9A07G054_ADC_PCLK>;
+			clock-names = "adclk", "pclk";
+			resets = <&cpg R9A07G054_ADC_PRESETN>,
+				 <&cpg R9A07G054_ADC_ADRST_N>;
+			reset-names = "presetn", "adrst-n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				reg = <0>;
+			};
+			channel@1 {
+				reg = <1>;
+			};
+			channel@2 {
+				reg = <2>;
+			};
+			channel@3 {
+				reg = <3>;
+			};
+			channel@4 {
+				reg = <4>;
+			};
+			channel@5 {
+				reg = <5>;
+			};
+			channel@6 {
+				reg = <6>;
+			};
+			channel@7 {
+				reg = <7>;
+			};
+		};
+
+		tsu: thermal@10059400 {
+			compatible = "renesas,r9a07g054-tsu",
+				     "renesas,rzg2l-tsu";
+			reg = <0 0x10059400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G054_TSU_PCLK>;
+			resets = <&cpg R9A07G054_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		sbc: spi@10060000 {
+			compatible = "renesas,r9a07g054-rpc-if",
+				     "renesas,rzg2l-rpc-if";
+			reg = <0 0x10060000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>,
+			      <0 0x10070000 0 0x10000>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_SPI_CLK2>,
+				 <&cpg CPG_MOD R9A07G054_SPI_CLK>;
+			resets = <&cpg R9A07G054_SPI_RST>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cru: video@10830000 {
+			compatible = "renesas,r9a07g054-cru", "renesas,rzg2l-cru";
+			reg = <0 0x10830000 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G054_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G054_CRU_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_CRU_ACLK>;
+			clock-names = "video", "apb", "axi";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+			resets = <&cpg R9A07G054_CRU_PRESETN>,
+				 <&cpg R9A07G054_CRU_ARESETN>;
+			reset-names = "presetn", "aresetn";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+					cruparallel: endpoint@0 {
+						reg = <0>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+					crucsi2: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi2cru>;
+					};
+				};
+			};
+		};
+
+		csi2: csi2@10830400 {
+			compatible = "renesas,r9a07g054-csi2", "renesas,rzg2l-csi2";
+			reg = <0 0x10830400 0 0xfc00>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_CRU_SYSCLK>,
+				 <&cpg CPG_MOD R9A07G054_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G054_CRU_PCLK>;
+			clock-names = "system", "video", "apb";
+			resets = <&cpg R9A07G054_CRU_PRESETN>,
+				 <&cpg R9A07G054_CRU_CMN_RSTB>;
+			reset-names = "presetn", "cmn-rstb";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					csi2cru: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&crucsi2>;
+					};
+				};
+			};
+		};
+
+		dsi: dsi@10850000 {
+			compatible = "renesas,r9a07g054-mipi-dsi",
+				     "renesas,rzg2l-mipi-dsi";
+			reg = <0 0x10850000 0 0x20000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "seq0", "seq1", "vin1", "rcv",
+					  "ferr", "ppi", "debug";
+			clocks = <&cpg CPG_MOD R9A07G054_MIPI_DSI_PLLCLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_SYSCLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_ACLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_VCLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_LPCLK>;
+			clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+			resets = <&cpg R9A07G054_MIPI_DSI_CMN_RSTB>,
+				 <&cpg R9A07G054_MIPI_DSI_ARESET_N>,
+				 <&cpg R9A07G054_MIPI_DSI_PRESET_N>;
+			reset-names = "rst", "arst", "prst";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		vspd: vsp@10870000 {
+			compatible = "renesas,r9a07g054-vsp2",
+				     "renesas,r9a07g044-vsp2";
+			reg = <0 0x10870000 0 0x10000>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_LCDC_RESET_N>;
+			renesas,fcp = <&fcpvd>;
+		};
+
+		fcpvd: fcp@10880000 {
+			compatible = "renesas,r9a07g054-fcpvd",
+				     "renesas,fcpv";
+			reg = <0 0x10880000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_LCDC_RESET_N>;
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g054-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g054-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpm_int", "ca55stbydone_int",
+					  "cm33stbyr_int", "ca55_deny";
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g054-pinctrl",
+				     "renesas,r9a07g044-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&irqc>;
+			interrupt-controller;
+			gpio-ranges = <&pinctrl 0 0 392>;
+			clocks = <&cpg CPG_MOD R9A07G054_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_GPIO_RSTN>,
+				 <&cpg R9A07G054_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G054_GPIO_SPARE_RESETN>;
+		};
+
+		irqc: interrupt-controller@110a0000 {
+			compatible = "renesas,r9a07g054-irqc",
+				     "renesas,rzg2l-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0x110a0000 0 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>,
+				 <&cpg CPG_MOD R9A07G054_IA55_PCLK>;
+			clock-names = "clk", "pclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_IA55_RESETN>;
+		};
+
+		dmac: dma-controller@11820000 {
+			compatible = "renesas,r9a07g054-dmac",
+				     "renesas,rz-dmac";
+			reg = <0 0x11820000 0 0x10000>,
+			      <0 0x11830000 0 0x10000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD R9A07G054_DMAC_ACLK>,
+				 <&cpg CPG_MOD R9A07G054_DMAC_PCLK>;
+			clock-names = "main", "register";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_DMAC_ARESETN>,
+				 <&cpg R9A07G054_DMAC_RST_ASYNC>;
+			reset-names = "arst", "rst_async";
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		gpu: gpu@11840000 {
+			compatible = "renesas,r9a07g054-mali",
+				     "arm,mali-bifrost";
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			clocks = <&cpg CPG_MOD R9A07G054_GPU_CLK>,
+				 <&cpg CPG_MOD R9A07G054_GPU_AXI_CLK>,
+				 <&cpg CPG_MOD R9A07G054_GPU_ACE_CLK>;
+			clock-names = "gpu", "bus", "bus_ace";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_GPU_RESETN>,
+				 <&cpg R9A07G054_GPU_AXI_RESETN>,
+				 <&cpg R9A07G054_GPU_ACE_RESETN>;
+			reset-names = "rst", "axi_rst", "ace_rst";
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		gic: interrupt-controller@11900000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x11900000 0 0x40000>,
+			      <0x0 0x11940000 0 0x60000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		sdhi0: mmc@11c00000 {
+			compatible = "renesas,sdhi-r9a07g054",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c00000 0 0x10000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK>,
+				 <&cpg CPG_MOD R9A07G054_SDHI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SDHI0_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G054_SDHI0_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@11c10000 {
+			compatible = "renesas,sdhi-r9a07g054",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c10000 0 0x10000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK>,
+				 <&cpg CPG_MOD R9A07G054_SDHI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SDHI1_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G054_SDHI1_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@11c20000 {
+			compatible = "renesas,r9a07g054-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c20000 0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G054_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G054_ETH0_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G054_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G054_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c30000 {
+			compatible = "renesas,r9a07g054-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G054_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G054_ETH1_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G054_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G054_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		phyrst: usbphy-ctrl@11c40000 {
+			compatible = "renesas,r9a07g054-usbphy-ctrl",
+				     "renesas,rzg2l-usbphy-ctrl";
+			reg = <0 0x11c40000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>;
+			resets = <&cpg R9A07G054_USB_PRESETN>;
+			power-domains = <&cpg>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		ohci0: usb@11c50000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c50000 0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G054_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@11c70000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c70000 0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G054_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@11c50100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c50100 0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G054_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@11c70100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c70100 0 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G054_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			compatible = "renesas,usb2-phy-r9a07g054",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c50200 0 0x700>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			compatible = "renesas,usb2-phy-r9a07g054",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c70200 0 0x700>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@11c60000 {
+			compatible = "renesas,usbhs-r9a07g054",
+				     "renesas,rza2-usbhs";
+			reg = <0 0x11c60000 0 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2P_EXR_CPUCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G054_USB_U2P_EXL_SYSRST>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@12800800 {
+			compatible = "renesas,r9a07g054-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800800 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G054_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G054_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@12800c00 {
+			compatible = "renesas,r9a07g054-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800C00 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G054_WDT1_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_WDT1_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G054_WDT1_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm0: timer@12801000 {
+			compatible = "renesas,r9a07g054-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801000 0x0 0x400>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G054_OSTM0_PCLK>;
+			resets = <&cpg R9A07G054_OSTM0_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@12801400 {
+			compatible = "renesas,r9a07g054-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801400 0x0 0x400>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G054_OSTM1_PCLK>;
+			resets = <&cpg R9A07G054_OSTM1_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@12801800 {
+			compatible = "renesas,r9a07g054-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801800 0x0 0x400>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G054_OSTM2_PCLK>;
+			resets = <&cpg R9A07G054_OSTM2_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsu 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor_crit: sensor-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				target: trip-point {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
new file mode 100644
index 0000000000..d85a6ac0f0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L R9A07G054L1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g054l1", "renesas,r9a07g054";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso
new file mode 120000
index 0000000000..0f175341d3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1 @@
+r9a07g044l2-smarc-cru-csi-ov5645.dtso
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
new file mode 100644
index 0000000000..b3e6016880
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/* Enable SCIF2 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
+/*
+ * To enable MTU3a PWM on PMOD0,
+ * Disable PMOD1_SER0 by setting "#define PMOD1_SER0	0" above and
+ * enable PMOD_MTU3 by setting "#define PMOD_MTU3	1" below.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && PMOD1_SER0)
+#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive "
+#endif
+
+#define MTU3_COUNTER_Z_PHASE_SIGNAL	0
+#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL)
+#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
+#endif
+
+#include "r9a07g054l2.dtsi"
+#include "rzg2l-smarc-som.dtsi"
+#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g054l2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi
new file mode 100644
index 0000000000..4d5914bc95
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L R9A07G054L2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g054l2", "renesas,r9a07g054";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
new file mode 100644
index 0000000000..39fe3f9499
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2M (r9a09g011) Evaluation Kit Board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g011.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
+
+/ {
+	model = "RZ/V2M Evaluation Kit 2.0";
+	compatible = "renesas,rzv2mevk2", "renesas,r9a09g011";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	memory@58000000 {
+		device_type = "memory";
+		/*
+		 * first 1.25GiB is reserved for ISP Firmware,
+		 * next 128MiB is reserved for secure area.
+		 */
+		reg = <0x0 0x58000000 0x0 0x28000000>;
+	};
+
+	memory@180000000 {
+		device_type = "memory";
+		reg = <0x1 0x80000000 0x0 0x80000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&pwc 0 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 0>, <1800000 1>;
+	};
+};
+
+&avb {
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&emmc {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	max-frequency = <200000000>;
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&pinctrl {
+	emmc_pins: emmc {
+		data {
+			pinmux = <RZV2M_PORT_PINMUX(0, 0, 2)>, /* MMDAT0 */
+				 <RZV2M_PORT_PINMUX(0, 1, 2)>, /* MMDAT1 */
+				 <RZV2M_PORT_PINMUX(0, 2, 2)>, /* MMDAT2 */
+				 <RZV2M_PORT_PINMUX(0, 3, 2)>, /* MMDAT3 */
+				 <RZV2M_PORT_PINMUX(0, 4, 2)>, /* MMDAT4 */
+				 <RZV2M_PORT_PINMUX(0, 5, 2)>, /* MMDAT5 */
+				 <RZV2M_PORT_PINMUX(0, 6, 2)>, /* MMDAT6 */
+				 <RZV2M_PORT_PINMUX(0, 7, 2)>; /* MMDAT7 */
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(0, 10, 2)>, /* MMCMD */
+				 <RZV2M_PORT_PINMUX(0, 11, 2)>; /* MMCLK */
+			power-source = <1800>;
+		};
+	};
+
+	i2c0_pins: i2c0 {
+		pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */
+			 <RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */
+	};
+
+	i2c2_pins: i2c2 {
+		pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
+			 <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
+	};
+
+	sdhi0_pins: sd0 {
+		data {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <3300>;
+		};
+
+		ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <3300>;
+		};
+
+		cd {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <3300>;
+		};
+	};
+
+	sdhi0_pins_uhs: sd0-uhs {
+		data {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <1800>;
+		};
+
+		cd {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <1800>;
+		};
+	};
+
+	uart0_pins: uart0 {
+		pinmux = <RZV2M_PORT_PINMUX(3, 0, 2)>, /* UATX0 */
+			 <RZV2M_PORT_PINMUX(3, 1, 2)>, /* UARX0 */
+			 <RZV2M_PORT_PINMUX(3, 2, 2)>, /* UACTS0N */
+			 <RZV2M_PORT_PINMUX(3, 3, 2)>; /* UARTS0N */
+	};
+};
+
+&pwc {
+	renesas,rzv2m-pwc-power;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3drd {
+	status = "okay";
+};
+
+&usb3host {
+	status = "okay";
+};
+
+&usb3peri {
+	companion = <&usb3host>;
+	status = "okay";
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&wdt0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
new file mode 100644
index 0000000000..33f2ecf424
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2M SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a09g011-cpg.h>
+
+/ {
+	compatible = "renesas,r9a09g011";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA53>;
+			clocks = <&cpg CPG_MOD R9A09G011_CA53_CLK>;
+		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@82010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x82010000 0 0x1000>,
+			      <0x0 0x82020000 0 0x20000>,
+			      <0x0 0x82040000 0 0x20000>,
+			      <0x0 0x82060000 0 0x20000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD R9A09G011_GIC_CLK>;
+			clock-names = "clk";
+		};
+
+		sdhi0: mmc@85000000 {
+			compatible = "renesas,sdhi-r9a09g011",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x85000000 0 0x2000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_SDI0_IMCLK>,
+				 <&cpg CPG_MOD R9A09G011_SDI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A09G011_SDI0_IMCLK2>,
+				 <&cpg CPG_MOD R9A09G011_SDI0_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A09G011_SDI0_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@85010000  {
+			compatible = "renesas,sdhi-r9a09g011",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x85010000 0 0x2000>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_SDI1_IMCLK>,
+				 <&cpg CPG_MOD R9A09G011_SDI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A09G011_SDI1_IMCLK2>,
+				 <&cpg CPG_MOD R9A09G011_SDI1_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A09G011_SDI1_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		emmc: mmc@85020000  {
+			compatible = "renesas,sdhi-r9a09g011",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x85020000 0 0x2000>;
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_EMM_IMCLK>,
+				 <&cpg CPG_MOD R9A09G011_EMM_CLK_HS>,
+				 <&cpg CPG_MOD R9A09G011_EMM_IMCLK2>,
+				 <&cpg CPG_MOD R9A09G011_EMM_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A09G011_EMM_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb3drd: usb3drd@85070400 {
+			compatible = "renesas,r9a09g011-usb3drd",
+				     "renesas,rzv2m-usb3drd";
+			reg = <0x0 0x85070400 0x0 0x100>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "drd", "bc", "gpi";
+			clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+				 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+			clock-names = "axi", "reg";
+			resets = <&cpg R9A09G011_USB_DRD_RESET>;
+			power-domains = <&cpg>;
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			usb3host: usb@85060000 {
+				compatible = "renesas,r9a09g011-xhci",
+					     "renesas,rzv2m-xhci";
+				reg = <0 0x85060000 0 0x2000>;
+				interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>,
+					 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+				clock-names = "axi", "reg";
+				resets = <&cpg R9A09G011_USB_ARESETN_H>;
+				power-domains = <&cpg>;
+				status = "disabled";
+			};
+
+			usb3peri: usb3peri@85070000 {
+				compatible = "renesas,r9a09g011-usb3-peri",
+					     "renesas,rzv2m-usb3-peri";
+				reg = <0x0 0x85070000 0x0 0x400>;
+				interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+					 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+				clock-names = "axi", "reg";
+				resets = <&cpg R9A09G011_USB_ARESETN_P>;
+				power-domains = <&cpg>;
+				status = "disabled";
+			};
+		};
+
+		avb: ethernet@a3300000 {
+			compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
+			reg = <0 0xa3300000 0 0x800>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* ch18: Tx0 BE */
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* ch19: Tx1 NC */
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* DiA */
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* DiB */
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, /* Line1_A */
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, /* Line1_B */
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, /* Line2_A */
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, /* Line2_B */
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>; /* Line3 MAC */
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "dia", "dib",
+					  "err_a", "err_b", "mgmt_a", "mgmt_b",
+					  "line3";
+			clocks = <&cpg CPG_MOD R9A09G011_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A09G011_ETH0_CLK_CHI>,
+				 <&cpg CPG_MOD R9A09G011_ETH0_GPTP_EXT>;
+			clock-names = "axi", "chi", "gptp";
+			resets = <&cpg R9A09G011_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@a3500000 {
+			compatible = "renesas,r9a09g011-cpg";
+			reg = <0 0xa3500000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		pwc: pwc@a3700000 {
+			compatible = "renesas,r9a09g011-pwc", "renesas,rzv2m-pwc";
+			reg = <0 0xa3700000 0 0x800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		sys: system-controller@a3f03000 {
+			compatible = "renesas,r9a09g011-sys";
+			reg = <0 0xa3f03000 0 0x400>;
+		};
+
+		csi0: spi@a4020000 {
+			compatible = "renesas,rzv2m-csi";
+			reg = <0 0xa4020000 0 0x80>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_CSI0_CLK>,
+				 <&cpg CPG_MOD R9A09G011_CPERI_GRPG_PCLK>;
+			clock-names = "csiclk", "pclk";
+			resets = <&cpg R9A09G011_CSI_GPG_PRESETN>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		csi4: spi@a4020200 {
+			compatible = "renesas,rzv2m-csi";
+			reg = <0 0xa4020200 0 0x80>;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_CSI4_CLK>,
+				 <&cpg CPG_MOD R9A09G011_CPERI_GRPH_PCLK>;
+			clock-names = "csiclk", "pclk";
+			resets = <&cpg R9A09G011_CSI_GPH_PRESETN>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@a4030000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
+			reg = <0 0xa4030000 0 0x80>;
+			interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tia", "tis";
+			clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>;
+			resets = <&cpg R9A09G011_IIC_GPA_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@a4030100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
+			reg = <0 0xa4030100 0 0x80>;
+			interrupts = <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tia", "tis";
+			clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK1>;
+			resets = <&cpg R9A09G011_IIC_GPB_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		uart0: serial@a4040000 {
+			compatible = "renesas,r9a09g011-uart", "renesas,em-uart";
+			reg = <0 0xa4040000 0 0x80>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_URT0_CLK>,
+				 <&cpg CPG_MOD R9A09G011_URT_PCLK>;
+			clock-names = "sclk", "pclk";
+			status = "disabled";
+		};
+
+		wdt0: watchdog@a4050000 {
+			compatible = "renesas,r9a09g011-wdt",
+				     "renesas,rzv2m-wdt";
+			reg = <0 0xa4050000 0 0x80>;
+			clocks = <&cpg CPG_MOD R9A09G011_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A09G011_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&cpg R9A09G011_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@b6250000 {
+			compatible = "renesas,r9a09g011-pinctrl";
+			reg = <0 0xb6250000 0 0x800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 352>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A09G011_PFC_PRESETN>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
new file mode 100644
index 0000000000..a7594ba3a9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * SSI-WM8978
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer cset name='Left Input Mixer L2 Switch' on
+ *	amixer cset name='Right Input Mixer R2 Switch' on
+ *	amixer cset name='Headphone Playback Volume' 100
+ *	amixer cset name='PCM Volume' 100%
+ *	amixer cset name='Input PGA Volume' 25
+ *
+ */
+
+/ {
+	aliases {
+		serial0 = &scif0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_mclock: audio_mclock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	snd_rzg2l: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets = "Microphone", "Microphone Jack";
+		simple-audio-card,routing =
+			    "L2", "Mic Bias",
+			    "R2", "Mic Bias",
+			    "Mic Bias", "Microphone Jack";
+
+		cpu_dai: simple-audio-card,cpu {
+		};
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_mclock>;
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	usb0_vbus_otg: regulator-usb0-vbus-otg {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS_OTG";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&audio_clk1 {
+	clock-frequency = <11289600>;
+};
+
+&audio_clk2 {
+	clock-frequency = <12288000>;
+};
+
+&canfd {
+	pinctrl-0 = <&can0_pins &can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&phyrst {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&usb0_vbus_otg>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi
new file mode 100644
index 0000000000..c5bb63c63b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common Device Tree for the RZ/G2L SMARC EVK (and alike EVKs) with
+ * OV5645 camera connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+&{/} {
+	ov5645_vdddo_1v8: 1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdddo";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vdda_2v8: 2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdda";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vddd_1v5: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	ov5645_fixed_clk: osc25250-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&cru {
+	status = "okay";
+};
+
+&csi2 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi2_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5645_ep>;
+			};
+		};
+	};
+};
+
+&OV5645_PARENT_I2C {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ov5645: camera@3c {
+		compatible = "ovti,ov5645";
+		reg = <0x3c>;
+		clocks = <&ov5645_fixed_clk>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&ov5645_vdddo_1v8>;
+		vdda-supply = <&ov5645_vdda_2v8>;
+		vddd-supply = <&ov5645_vddd_1v5>;
+
+		port {
+			ov5645_ep: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi2_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi
new file mode 100644
index 0000000000..bcc21178ae
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Advantech idk-1110wr LVDS panel connected
+ * to RZ/G2 boards
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+	panel-lvds {
+		compatible = "advantech,idk-1110wr", "panel-lvds";
+
+		width-mm = <223>;
+		height-mm = <125>;
+
+		data-mapping = "jeida-24";
+
+		panel-timing {
+			/* 1024x600 @60Hz */
+			clock-frequency = <51200000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <240>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vfront-porch = <15>;
+			vback-porch = <10>;
+			vsync-len = <10>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
new file mode 100644
index 0000000000..18c526c7a4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	can0_pins: can0 {
+		pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
+			 <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
+	};
+
+	/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
+	can0-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can0_stb";
+	};
+
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
+			 <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
+	};
+
+	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
+	can1-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can1_stb";
+	};
+
+	i2c0_pins: i2c0 {
+		pins = "RIIC0_SDA", "RIIC0_SCL";
+		input-enable;
+	};
+
+	i2c1_pins: i2c1 {
+		pins = "RIIC1_SDA", "RIIC1_SCL";
+		input-enable;
+	};
+
+	i2c3_pins: i2c3 {
+		pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
+			 <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
+	};
+
+	mtu3_pins: mtu3 {
+		mtu3-ext-clk-input-pin {
+			pinmux = <RZG2L_PORT_PINMUX(48, 0, 4)>, /* MTCLKA */
+				 <RZG2L_PORT_PINMUX(48, 1, 4)>; /* MTCLKB */
+		};
+
+		mtu3-pwm {
+			pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */
+				 <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */
+				 <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */
+				 <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */
+		};
+
+#if MTU3_COUNTER_Z_PHASE_SIGNAL
+		mtu3-zphase-clk {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 3)>; /* MTIOC1A */
+		};
+#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */
+	};
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
+			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
+	};
+
+	scif2_pins: scif2 {
+		pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */
+			 <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
+			 <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
+	};
+
+	ssi0_pins: ssi0 {
+		pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
+			 <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
+			 <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
+	};
+
+	usb0_pins: usb0 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
+	};
+};
+
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
new file mode 100644
index 0000000000..547859c388
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */
+#define EMMC	1
+
+/*
+ * To enable uSD card on CN3,
+ * SW1[2] should be at position 3/ON.
+ * Disable eMMC by setting "#define EMMC	0" above.
+ */
+#define SDHI	(!EMMC)
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p1v: regulator-vdd-core {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.1V";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-boot-on;
+		gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	/* 32.768kHz crystal */
+	x2: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&adc {
+	pinctrl-0 = <&adc_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/delete-node/ channel@6;
+	/delete-node/ channel@7;
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&gpu {
+	mali-supply = <&reg_1p1v>;
+};
+
+&i2c3 {
+	raa215300: pmic@12 {
+		compatible = "renesas,raa215300";
+		reg = <0x12>, <0x6f>;
+		reg-names = "main", "rtc";
+
+		clocks = <&x2>;
+		clock-names = "xin";
+	};
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	adc_pins: adc {
+		pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */
+	};
+
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+			 <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
+			 <RZG2L_PORT_PINMUX(1, 0, 1)>;  /* IRQ2 */
+	};
+
+	eth1_pins: eth1 {
+		pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
+			 <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
+			 <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
+			 <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */
+			 <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
+			 <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
+			 <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
+			 <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
+			 <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
+			 <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
+			 <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
+			 <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
+			 <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
+			 <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
+			 <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
+			 <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* IRQ3 */
+	};
+
+	gpio-sd0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(4, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_pwr_en";
+	};
+
+	qspi0_pins: qspi0 {
+		qspi0-data {
+			pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+			power-source = <1800>;
+		};
+
+		qspi0-ctrl {
+			pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
+			power-source = <1800>;
+		};
+	};
+
+	/*
+	 * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
+	 * The below switch logic can be used to select the device between
+	 * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
+	 * SW1[2] should be at position 2/OFF to enable 64 GB eMMC
+	 * SW1[2] should be at position 3/ON to enable uSD card CN3
+	 */
+	sd0-dev-sel-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(41, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd0_dev_sel";
+	};
+
+	sdhi0_emmc_pins: sd0emmc {
+		sd0_emmc_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		sd0_mux {
+			pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
+		};
+	};
+};
+
+&sbc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x00000000 0x2000000>;
+				read-only;
+			};
+			user@2000000 {
+				reg = <0x2000000 0x2000000>;
+			};
+		};
+	};
+};
+
+#if SDHI
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+#if EMMC
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt1 {
+	status = "okay";
+	timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
new file mode 100644
index 0000000000..68eab8e26b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+	aliases {
+		serial1 = &scif2;
+		i2c3 = &i2c3;
+	};
+
+	osc1: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+};
+
+&cpu_dai {
+	sound-dai = <&ssi0>;
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	adv7535: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(2, 1) IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&osc1>;
+		clock-names = "cec";
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		a2vdd-supply = <&reg_1p8v>;
+		v3p3-supply = <&reg_3p3v>;
+		v1p2-supply = <&reg_1p8v>;
+
+		adi,dsi-lanes = <4>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+	};
+};
+
+#if PMOD_MTU3
+&mtu3 {
+	pinctrl-0 = <&mtu3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+#if MTU3_COUNTER_Z_PHASE_SIGNAL
+/* SDHI cd pin is muxed with counter Z phase signal */
+&sdhi1 {
+	status = "disabled";
+};
+#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */
+
+&spi1 {
+	status = "disabled";
+};
+#endif /* PMOD_MTU3 */
+
+/*
+ * To enable SCIF2 (SER0) on PMOD1 (CN7)
+ * SW1 should be at position 2->3 so that SER0_CTS# line is activated
+ * SW2 should be at position 2->3 so that SER0_TX line is activated
+ * SW3 should be at position 2->3 so that SER0_RX line is activated
+ * SW4 should be at position 2->3 so that SER0_RTS# line is activated
+ */
+#if PMOD1_SER0
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+#endif
+
+&ssi0 {
+	pinctrl-0 = <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&vccq_sdhi1 {
+	gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
new file mode 100644
index 0000000000..92c64d5834
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC pincontrol parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+#if SW_SCIF_CAN
+	/* SW8 should be at position 2->1 */
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(40, 0, 3)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(40, 1, 3)>; /* RxD */
+	};
+#endif
+
+#if SW_RSPI_CAN
+	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
+	can1-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can1_stb";
+	};
+
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 3)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(44, 1, 3)>; /* RxD */
+	};
+#endif
+
+	i2c0_pins: i2c0 {
+		pins = "RIIC0_SDA", "RIIC0_SCL";
+		input-enable;
+	};
+
+	i2c1_pins: i2c1 {
+		pins = "RIIC1_SDA", "RIIC1_SCL";
+		input-enable;
+	};
+
+	i2c2_pins: i2c2 {
+		pinmux = <RZG2L_PORT_PINMUX(42, 3, 1)>, /* SDA */
+			 <RZG2L_PORT_PINMUX(42, 4, 1)>; /* SCL */
+	};
+
+	mtu3_pins: mtu3 {
+		mtu3-pwm {
+			pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */
+				 <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */
+				 <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */
+				 <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */
+		};
+	};
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
+			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
+	};
+
+	scif1_pins: scif1 {
+		pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */
+			 <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
+			 <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
+	};
+
+	ssi0_pins: ssi0 {
+		pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
+			 <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
+			 <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
+	};
+
+	usb0_pins: usb0 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
+	};
+};
+
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
new file mode 100644
index 0000000000..56ff924539
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC SOM common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p1v: regulator-vdd-core {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.1V";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-boot-on;
+		gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	/* 32.768kHz crystal */
+	x2: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ0 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&gpu {
+	mali-supply = <&reg_1p1v>;
+};
+
+&i2c2 {
+	raa215300: pmic@12 {
+		compatible = "renesas,raa215300";
+		reg = <0x12>, <0x6f>;
+		reg-names = "main", "rtc";
+
+		clocks = <&x2>;
+		clock-names = "xin";
+	};
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+			 <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
+			 <RZG2L_PORT_PINMUX(0, 0, 1)>;  /* IRQ0 */
+	};
+
+	gpio-sd0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_pwr_en";
+	};
+
+	qspi0_pins: qspi0 {
+		qspi0-data {
+			pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+			power-source = <1800>;
+		};
+
+		qspi0-ctrl {
+			pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
+			power-source = <1800>;
+		};
+	};
+
+	/*
+	 * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
+	 * The below switch logic can be used to select the device between
+	 * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
+	 * SW1[2] should be at OFF position to enable 64 GB eMMC
+	 * SW1[2] should be at position ON to enable uSD card CN3
+	 */
+	gpio-sd0-dev-sel-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(40, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_dev_sel";
+	};
+
+	sdhi0_emmc_pins: sd0emmc {
+		sd0_emmc_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		sd0_mux {
+			pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */
+		};
+	};
+};
+
+&sbc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x00000000 0x2000000>;
+				read-only;
+			};
+			user@2000000 {
+				reg = <0x2000000 0x2000000>;
+			};
+		};
+	};
+};
+
+#if (!SW_SD0_DEV_SEL)
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+#if SW_SD0_DEV_SEL
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt1 {
+	status = "okay";
+	timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
new file mode 100644
index 0000000000..83fce96a25
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC EVK parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#include "rzg2lc-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+
+/ {
+	aliases {
+		serial1 = &scif1;
+		i2c2 = &i2c2;
+	};
+
+	osc1: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+};
+
+#if (SW_SCIF_CAN || SW_RSPI_CAN)
+&canfd {
+	pinctrl-0 = <&can1_pins>;
+	/delete-node/ channel@0;
+};
+#else
+&canfd {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+#endif
+
+&cpu_dai {
+	sound-dai = <&ssi0>;
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	adv7535: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(43, 1) IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&osc1>;
+		clock-names = "cec";
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		a2vdd-supply = <&reg_1p8v>;
+		v3p3-supply = <&reg_3p3v>;
+		v1p2-supply = <&reg_1p8v>;
+
+		adi,dsi-lanes = <4>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+	};
+};
+
+#if PMOD_MTU3
+&mtu3 {
+	pinctrl-0 = <&mtu3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&spi1 {
+	status = "disabled";
+};
+#endif
+
+/*
+ * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board
+ * SW1 should be at position 2->3 so that SER0_CTS# line is activated
+ * SW2 should be at position 2->3 so that SER0_TX line is activated
+ * SW3 should be at position 2->3 so that SER0_RX line is activated
+ * SW4 should be at position 2->3 so that SER0_RTS# line is activated
+ */
+#if (!SW_SCIF_CAN && PMOD1_SER0)
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+#endif
+
+&ssi0 {
+	pinctrl-0 = <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+#if (SW_RSPI_CAN)
+&spi1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+#endif
+
+&vccq_sdhi1 {
+	gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
new file mode 100644
index 0000000000..355694fe4a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SMARC pincontrol parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	can0_pins: can0 {
+		pinmux = <RZG2L_PORT_PINMUX(1, 1, 3)>, /* TX */
+			 <RZG2L_PORT_PINMUX(1, 2, 3)>; /* RX */
+	};
+
+#if (SW_ET0_EN_N)
+	can0-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(2, 2) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can0_stb";
+	};
+#endif
+
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(2, 0, 3)>, /* TX */
+			 <RZG2L_PORT_PINMUX(2, 1, 3)>; /* RX */
+	};
+
+#if (SW_ET0_EN_N)
+	can1-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can1_stb";
+	};
+#endif
+
+	i2c0_pins: i2c0 {
+		pins = "RIIC0_SDA", "RIIC0_SCL";
+		input-enable;
+	};
+
+	i2c1_pins: i2c1 {
+		pins = "RIIC1_SDA", "RIIC1_SCL";
+		input-enable;
+	};
+
+	mtu3_pins: mtu3 {
+		mtu2-pwm {
+			pinmux = <RZG2L_PORT_PINMUX(4, 0, 4)>; /* MTIOC2A */
+		};
+	};
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(6, 4, 6)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(6, 3, 6)>; /* RxD */
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(0, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
+
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */
+			 <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */
+	};
+
+	ssi1_pins: ssi1 {
+		pinmux = <RZG2L_PORT_PINMUX(3, 0, 2)>, /* BCK */
+			 <RZG2L_PORT_PINMUX(3, 1, 2)>, /* RCK */
+			 <RZG2L_PORT_PINMUX(3, 2, 2)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(3, 3, 2)>; /* RXD */
+	};
+
+	usb0_pins: usb0 {
+		pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(5, 2, 1)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
new file mode 100644
index 0000000000..97cdad2a12
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SMARC SOM common parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+#if !(SW_SW0_DEV_SEL)
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-boot-on;
+		gpios = <&pinctrl RZG2L_GPIO(6, 2) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+#endif
+};
+
+#if (SW_SW0_DEV_SEL)
+&adc {
+	pinctrl-0 = <&adc_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+#endif
+
+#if (!SW_ET0_EN_N)
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+#endif
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ7 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	adc_pins: adc {
+		pinmux = <RZG2L_PORT_PINMUX(6, 2, 1)>; /* ADC_TRG */
+	};
+
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */
+			 <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(1, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */
+			 <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */
+	};
+
+	eth1_pins: eth1 {
+		pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */
+			 <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */
+			 <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */
+			 <RZG2L_PORT_PINMUX(7, 0, 1)>, /* ET1_TXC */
+			 <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */
+			 <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */
+			 <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */
+			 <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */
+			 <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */
+			 <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */
+			 <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */
+			 <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */
+			 <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */
+			 <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */
+			 <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */
+			 <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */
+	};
+
+	sdhi0_emmc_pins: sd0emmc {
+		sd0_emmc_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		sd0_mux {
+			pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
+		};
+	};
+};
+
+#if (SW_SW0_DEV_SEL)
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#else
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
new file mode 100644
index 0000000000..8eb411aac8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include "rzg2ul-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+
+#if (!SW_ET0_EN_N)
+&canfd {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+#endif
+
+&cpu_dai {
+	sound-dai = <&ssi1>;
+};
+
+&i2c1 {
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+	};
+};
+
+#if PMOD_MTU3
+&mtu3 {
+	pinctrl-0 = <&mtu3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&spi1 {
+	status = "disabled";
+};
+#endif
+
+#if (SW_ET0_EN_N)
+&ssi1 {
+	pinctrl-0 = <&ssi1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+#else
+&snd_rzg2l {
+	status = "disabled";
+};
+
+&spi1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ssi1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+#endif
+
+&vccq_sdhi1 {
+	gpios = <&pinctrl RZG2L_GPIO(6, 1) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
new file mode 100644
index 0000000000..4a3d503782
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -0,0 +1,1104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for common parts of Salvator-X board variants
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-AK4613
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c_dvfs;
+		serial0 = &scif2;
+		serial1 = &hscif1;
+		ethernet0 = &avb;
+		mmc0 = &sdhi2;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+
+		brightness-levels = <256 128 64 16 8 4 0>;
+		default-brightness-level = <6>;
+
+		power-supply = <&reg_12v>;
+		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	cvbs-in {
+		compatible = "composite-video-connector";
+		label = "CVBS IN";
+
+		port {
+			cvbs_con: endpoint {
+				remote-endpoint = <&adv7482_ain7>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		label = "HDMI IN";
+		type = "a";
+
+		port {
+			hdmi_in_con: endpoint {
+				remote-endpoint = <&adv7482_hdmi>;
+			};
+		};
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		label = "HDMI0 OUT";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	hdmi1-out {
+		compatible = "hdmi-connector";
+		label = "HDMI1 OUT";
+		type = "a";
+
+		port {
+			hdmi1_con: endpoint {
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW4-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW4-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW4-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW4-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "TSW0";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "TSW1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "TSW2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		label = "rcar-sound";
+
+		dais = <&rsnd_port0	/* ak4613 */
+			&rsnd_port1	/* HDMI0  */
+#ifdef SOC_HAS_HDMI1
+			&rsnd_port2	/* HDMI1  */
+#endif
+			>;
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi3: regulator-vcc-sdhi3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI3 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi3: regulator-vccq-sdhi3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI3 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	/* External DU dot clocks */
+	x21_clk: x21-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x22_clk: x22-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x23_clk: x23-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&a57_0 {
+	cpu-supply = <&dvfs>;
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&csi20 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi20_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1>;
+				remote-endpoint = <&adv7482_txb>;
+			};
+		};
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7482_txa>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+#ifdef SOC_HAS_HDMI1
+&hdmi1 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi1_out: endpoint {
+				remote-endpoint = <&hdmi1_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi1_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint2>;
+			};
+		};
+	};
+};
+
+&hdmi1_con {
+	remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+#endif /* SOC_HAS_HDMI1 */
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+
+		port {
+			ak4613_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint0>;
+			};
+		};
+	};
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca9654: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70 0x71 0x72 0x73 0x74 0x75
+		       0x60 0x61 0x62 0x63 0x64 0x65>;
+		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+			    "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
+
+		interrupt-parent = <&gpio6>;
+		interrupt-names = "intrq1", "intrq2";
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
+			     <31 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@7 {
+				reg = <7>;
+
+				adv7482_ain7: endpoint {
+					remote-endpoint = <&cvbs_con>;
+				};
+			};
+
+			port@8 {
+				reg = <8>;
+
+				adv7482_hdmi: endpoint {
+					remote-endpoint = <&hdmi_in_con>;
+				};
+			};
+
+			port@a {
+				reg = <10>;
+
+				adv7482_txa: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+
+			port@b {
+				reg = <11>;
+
+				adv7482_txb: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1>;
+					remote-endpoint = <&csi20_in>;
+				};
+			};
+		};
+	};
+
+	csa_vdd: adc@7c {
+		compatible = "maxim,max9611";
+		reg = <0x7c>;
+
+		shunt-resistor-micro-ohms = <5000>;
+	};
+
+	csa_dvfs: adc@7f {
+		compatible = "maxim,max9611";
+		reg = <0x7f>;
+
+		shunt-resistor-micro-ohms = <5000>;
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0xf>;
+		rohm,rstbmode-level;
+
+		regulators {
+			dvfs: dvfs {
+				regulator-name = "dvfs";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1030000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	keys_pins: keys {
+		pins = "GP_5_17", "GP_5_20", "GP_5_22";
+		bias-pull-up;
+	};
+
+	pwm1_pins: pwm1 {
+		groups = "pwm1_a";
+		function = "pwm1";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_a", "scif1_ctrl";
+		function = "scif1";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <3300>;
+	};
+
+	sdhi3_pins_uhs: sd3_uhs {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+
+		pwen {
+			pins = "GP_6_26";
+			bias-pull-down;
+		};
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_endpoint0: endpoint {
+				remote-endpoint = <&ak4613_endpoint>;
+
+				dai-format = "left_j";
+				bitclock-master = <&rsnd_endpoint0>;
+				frame-master = <&rsnd_endpoint0>;
+
+				playback = <&ssi0>, <&src0>, <&dvc0>;
+				capture = <&ssi1>, <&src1>, <&dvc1>;
+			};
+		};
+
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+
+#ifdef SOC_HAS_HDMI1
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_endpoint2: endpoint {
+				remote-endpoint = <&dw_hdmi1_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint2>;
+				frame-master = <&rsnd_endpoint2>;
+
+				playback = <&ssi3>;
+			};
+		};
+#endif /* SOC_HAS_HDMI1 */
+	};
+};
+
+&rpc {
+	/* Left disabled.  To be enabled by firmware when unlocked. */
+
+	flash@0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			bl2@40000 {
+				reg = <0x00040000 0x140000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x040000>;
+				read-only;
+			};
+			tee@200000 {
+				reg = <0x00200000 0x440000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x100000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+#ifdef SOC_HAS_SATA
+&sata {
+	status = "okay";
+};
+#endif /* SOC_HAS_SATA */
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
+	/* status = "okay"; */
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi3>;
+	vqmmc-supply = <&vccq_sdhi3>;
+	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	companion = <&xhci0>;
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&vin0 {
+	status = "okay";
+};
+
+&vin1 {
+	status = "okay";
+};
+
+&vin2 {
+	status = "okay";
+};
+
+&vin3 {
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&vin6 {
+	status = "okay";
+};
+
+&vin7 {
+	status = "okay";
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+#ifdef SOC_HAS_USB2_CH2
+&ehci2 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pfc {
+	usb2_pins: usb2 {
+		groups = "usb2";
+		function = "usb2";
+	};
+};
+
+&usb2_phy2 {
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+#endif /* SOC_HAS_USB2_CH2 */
diff --git a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso
new file mode 100644
index 0000000000..c83a30adc6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree overlay for the AA104XD12 panel connected to LVDS0 on a
+ * Salvator-X or Salvator-XS board
+ *
+ * Copyright 2021 Ideas on Board Oy
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+#include "panel-aa104xd12.dtsi"
+};
+
+&{/panel} {
+	backlight = <&backlight>;
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&lvds0_out>;
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
new file mode 100644
index 0000000000..ddee50e646
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board";
+	compatible = "renesas,salvator-x";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5923";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
new file mode 100644
index 0000000000..08b925624e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board";
+	compatible = "renesas,salvator-xs";
+};
+
+&extal_clk {
+	clock-frequency = <16640000>;
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	versaclock6: clock-generator@6a {
+		compatible = "idt,5p49v6901";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
+
+#ifdef SOC_HAS_SATA
+&pca9654 {
+	pcie-sata-switch-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		output-low; /* enable SATA by default */
+		line-name = "PCIE/SATA switch";
+	};
+};
+
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+#endif /* SOC_HAS_SATA */
+
+#ifdef SOC_HAS_USB2_CH3
+&ehci3 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&hsusb3 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci3 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&pfc {
+	/*
+	 * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
+	 *   (when SW31 is the default setting on Salvator-XS).
+	 * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
+	 *   r8a77951 with Salvator-XS.
+	 *   Hence the SW31 setting must be changed like 2) below.
+	 *   1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
+	 *	- Connect GP6_3[01] to ADV7842.
+	 *   2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
+	 *	- Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
+	 *	- Connect GP6_{04,21} to ADV7842.
+	 */
+	usb2_ch3_pins: usb2_ch3 {
+		groups = "usb2_ch3";
+		function = "usb2_ch3";
+	};
+};
+
+&usb2_phy3 {
+	pinctrl-0 = <&usb2_ch3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+#endif /* SOC_HAS_USB2_CH3 */
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi
new file mode 100644
index 0000000000..672b0a224e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card (MIX)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <-----> (2ch) (X) ak4613	(MIX-0)
+ *	(B) CPU1 (2ch)  --/			(MIX-1)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+
+/ {
+	sound_card: sound {
+		compatible = "audio-graph-scu-card";
+		label = "rcar-sound";
+
+		routing = "ak4613 Playback", "DAI0 Playback",
+			  "ak4613 Playback", "DAI1 Playback",
+			  "DAI0 Capture",    "ak4613 Capture";
+
+		dais = <&rsnd_port0 /* (A) CPU0 */
+			&rsnd_port1 /* (B) CPU1 */
+		>;
+	};
+};
+
+&ak4613 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * (X) ak4613
+		 */
+		prefix = "ak4613";
+		convert-rate = <48000>;
+
+		/* (A) CPU0 <-> (X) ak4613 */
+		ak4613_ep1: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&rsnd_for_ak4613_1>;
+		};
+		/* (B) CPU1 -> (X) ak4613 */
+		ak4613_ep2: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&rsnd_for_ak4613_2>;
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * (A) CPU0
+		 */
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_for_ak4613_1: endpoint {
+				remote-endpoint = <&ak4613_ep1>;
+				bitclock-master;
+				frame-master;
+				playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+				capture  = <&ssi1 &src0 &dvc1>;
+			};
+		};
+		/*
+		 * (B) CPU1
+		 */
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_for_ak4613_2: endpoint {
+				remote-endpoint = <&ak4613_ep2>;
+				bitclock-master;
+				frame-master;
+				playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi
new file mode 100644
index 0000000000..3be54df645
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <-----> ak4613
+ *	(B) CPU1  -----> HDMI
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+
+/ {
+	sound_card: sound {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+
+		dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
+			&rsnd_port1 /* (B) CPU1  -> HDMI   */
+		>;
+	};
+};
+
+&ak4613 {
+	#sound-dai-cells = <0>;
+
+	port {
+		/*
+		 * (A) CPU0 <-> ak4613
+		 */
+		ak4613_endpoint: endpoint {
+			remote-endpoint = <&rsnd_for_ak4613>;
+		};
+	};
+};
+
+&hdmi0 {
+	ports {
+		port@2 {
+			/*
+			 * (B) CPU1 -> HDMI
+			 */
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_for_hdmi>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			/*
+			 * (A) CPU0 <-> ak4613
+			 */
+			reg = <0>;
+			rsnd_for_ak4613: endpoint {
+				remote-endpoint = <&ak4613_endpoint>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssi0>, <&src0>, <&dvc0>;
+				capture  = <&ssi1>, <&src1>, <&dvc1>;
+			};
+		};
+		rsnd_port1: port@1 {
+			/*
+			 * (B) CPU1 -> HDMI
+			 */
+			reg = <1>;
+			rsnd_for_hdmi: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi
new file mode 100644
index 0000000000..75b024e3fe
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card2 (MIX + TDM Split)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X) ak4613	(MIX-0)
+ *	(B) CPU1 (2ch)  --/			(MIX-1)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+/ {
+	sound_card: sound {
+		compatible = "audio-graph-card2";
+		label = "rcar-sound";
+
+		routing = "ak4613 Playback", "DAI0 Playback",
+			  "ak4613 Playback", "DAI1 Playback",
+			  "DAI0 Capture",    "ak4613 Capture";
+
+		/delete-property/ dais;
+		links = <&fe_a		/* (A) CPU0   */
+			 &fe_b		/* (B) CPU1   */
+			 &be_x		/* (X) ak4613 */
+		>;
+
+		dpcm {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				/*
+				 * FE
+				 * (A) CPU0 (MIX-0)
+				 * (B) CPU1 (MIX-1)
+				 */
+				fe_a: port@0 { reg = <0>; fe_a_ep: endpoint { remote-endpoint = <&rsnd_a_ep>; }; };
+				fe_b: port@1 { reg = <1>; fe_b_ep: endpoint { remote-endpoint = <&rsnd_b_ep>; }; };
+			};
+
+			ports@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+				/*
+				 * BE
+				 * (X) ak4613
+				 */
+				be_x: port@0 { reg = <0>; be_x_ep: endpoint { remote-endpoint = <&ak4613_x_ep>; }; };
+			};
+		};
+	};
+};
+
+&ak4613 {
+	port {
+		/*
+		 * (X) ak4613
+		 */
+		prefix = "ak4613";
+		convert-rate = <48000>;
+
+		ak4613_x_ep: endpoint {
+			remote-endpoint = <&be_x_ep>;
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * (A) CPU0
+		 */
+		port@0 {
+			reg = <0>;
+			rsnd_a_ep: endpoint {
+				remote-endpoint = <&fe_a_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+				capture  = <&ssi1 &src0 &dvc1>;
+			};
+		};
+		/*
+		 * (B) CPU1
+		 */
+		port@1 {
+			reg = <1>;
+			rsnd_b_ep: endpoint {
+				remote-endpoint = <&fe_b_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi
new file mode 100644
index 0000000000..5ebec12358
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card2
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+#include "ulcb-audio-graph-card.dtsi"
+
+&sound_card {
+	compatible = "audio-graph-card2";
+
+	/delete-property/ dais;
+	links = <&rsnd_port0	/* (A) CPU0 <-> ak4613 */
+		 &rsnd_port1	/* (B) CPU1  -> HDMI   */
+		>;
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
new file mode 100644
index 0000000000..9b01354940
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Audio Graph Card (MIX + TDM Split)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X) ak4613	   (MIX-0)
+ *	(B) CPU1 (2ch)  --/			   (MIX-1)
+ *	(C) CPU2 (2ch)  ----> (8ch) (Y) PCM3168A-p (TDM-0 : 0,1ch)
+ *	(D) CPU3 (2ch)  --/			   (TDM-1 : 2,3ch)
+ *	(E) CPU4 (2ch)  --/			   (TDM-2 : 4,5ch)
+ *	(F) CPU5 (2ch)  --/			   (TDM-3 : 6,7ch)
+ *	(G) CPU6 (6ch) <----  (6ch) (Z) PCM3168A-c
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
+ *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
+ *	(C) aplay   -D plughw:0,2 xxx.wav (TDM-0)
+ *	(D) aplay   -D plughw:0,3 xxx.wav (TDM-1)
+ *	(E) aplay   -D plughw:0,4 xxx.wav (TDM-2)
+ *	(F) aplay   -D plughw:0,5 xxx.wav (TDM-3)
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(G) arecord -D plughw:0,6 xxx.wav
+ */
+
+&sound_card {
+	routing = "ak4613 Playback",   "DAI0 Playback",
+		  "ak4613 Playback",   "DAI1 Playback",
+		  "DAI0 Capture",      "ak4613 Capture",
+		  "pcm3168a Playback", "DAI2 Playback",
+		  "pcm3168a Playback", "DAI3 Playback",
+		  "pcm3168a Playback", "DAI4 Playback",
+		  "pcm3168a Playback", "DAI5 Playback";
+
+	dais = <&rsnd_port0 /* (A) CPU0 */
+		&rsnd_port1 /* (B) CPU1 */
+		&rsnd_port2 /* (C) CPU2 */
+		&rsnd_port3 /* (D) CPU3 */
+		&rsnd_port4 /* (E) CPU4 */
+		&rsnd_port5 /* (F) CPU5 */
+		&rsnd_port6 /* (G) GPU6 */
+	>;
+};
+
+&pcm3168a {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk-fs = <512>;
+
+		/*
+		 * (Y) PCM3168A-p
+		 */
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			prefix = "pcm3168a";
+			convert-channels = <8>; /* to 8ch TDM */
+
+			/* (C) CPU2 -> (Y) PCM3168A-p */
+			pcm3168a_endpoint_p1: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&rsnd_for_pcm3168a_play1>;
+				clocks = <&clksndsel>;
+			};
+			/* (D) CPU3 -> (Y) PCM3168A-p */
+			pcm3168a_endpoint_p2: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&rsnd_for_pcm3168a_play2>;
+				clocks = <&clksndsel>;
+			};
+			/* (E) CPU4 -> (Y) PCM3168A-p */
+			pcm3168a_endpoint_p3: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&rsnd_for_pcm3168a_play3>;
+				clocks = <&clksndsel>;
+			};
+			/* (F) CPU5 -> (Y) PCM3168A-p */
+			pcm3168a_endpoint_p4: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&rsnd_for_pcm3168a_play4>;
+				clocks = <&clksndsel>;
+			};
+		};
+		/*
+		 * (Z) PCM3168A-c
+		 */
+		port@1 {
+			reg = <1>;
+			/* (G) CPU6 <- PCM3168A-c */
+			pcm3168a_endpoint_c: endpoint {
+				remote-endpoint = <&rsnd_for_pcm3168a_capture>;
+				clocks = <&clksndsel>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		/* rsnd_port0-1 are defined in ulcb.dtsi */
+
+		/*
+		 * (C) CPU2
+		 */
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_for_pcm3168a_play1: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p1>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu30 &ssi3>;
+			};
+		};
+		/*
+		 * (D) CPU3
+		 */
+		rsnd_port3: port@3 {
+			reg = <3>;
+			rsnd_for_pcm3168a_play2: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p2>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu31 &ssi3>;
+			};
+		};
+		/*
+		 * (E) CPU4
+		 */
+		rsnd_port4: port@4 {
+			reg = <4>;
+			rsnd_for_pcm3168a_play3: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p3>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu32 &ssi3>;
+			};
+		};
+		/*
+		 * (F) CPU5
+		 */
+		rsnd_port5: port@5 {
+			reg = <5>;
+			rsnd_for_pcm3168a_play4: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p4>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu33 &ssi3>;
+			};
+		};
+		/*
+		 * (G) CPU6
+		 */
+		rsnd_port6: port@6 {
+			reg = <6>;
+			rsnd_for_pcm3168a_capture: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_c>;
+				bitclock-master;
+				frame-master;
+				dai-tdm-slot-num = <6>;
+				capture  = <&ssi4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi
new file mode 100644
index 0000000000..1db99b7608
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Audio Graph Card
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *	(C) CPU2  ----> PCM3168A-p (8ch)
+ *	(D) CPU3 <----  PCM3168A-c (6ch)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *	(C) aplay   -D plughw:0,2 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(D) arecord -D plughw:0,3 xxx.wav
+ */
+
+&sound_card {
+	dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
+		&rsnd_port1 /* (B) CPU1  -> HDMI   */
+		&rsnd_port2 /* (C) CPU2  -> PCM3168A-p */
+		&rsnd_port3 /* (D) CPU3 <-  PCM3168A-c */
+		>;
+};
+
+&pcm3168a {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk-fs = <512>;
+		/*
+		 * (C) CPU2 -> PCM3168A-p
+		 */
+		port@0 {
+			reg = <0>;
+			pcm3168a_endpoint_p: endpoint {
+				remote-endpoint = <&rsnd_for_pcm3168a_play>;
+				clocks = <&clksndsel>;
+			};
+		};
+		/*
+		 * (D) CPU3 <- PCM3168A-c
+		 */
+		port@1 {
+			reg = <1>;
+			pcm3168a_endpoint_c: endpoint {
+				remote-endpoint = <&rsnd_for_pcm3168a_capture>;
+				clocks = <&clksndsel>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		/* rsnd_port0/1 are defined in ulcb.dtsi */
+		/*
+		 * (C) CPU2 -> PCM3168A-p
+		 */
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_for_pcm3168a_play: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p>;
+				bitclock-master;
+				frame-master;
+				dai-tdm-slot-num = <8>;
+				playback = <&ssi3>;
+			};
+		};
+		/*
+		 * (D) CPU3 <- PCM3168A-c
+		 */
+		rsnd_port3: port@3 {
+			reg = <3>;
+			rsnd_for_pcm3168a_capture: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_c>;
+				bitclock-master;
+				frame-master;
+				dai-tdm-slot-num = <6>;
+				capture = <&ssi4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
new file mode 100644
index 0000000000..da644128a9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Audio Graph Card2 (MIX + TDM Split)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X)	ak4613	   (MIX-0)
+ *	(B) CPU1 (2ch)  --/			   (MIX-1)
+ *	(C) CPU3 (2ch)  ----> (8ch) (Y)	PCM3168A-p (TDM-0 : 0,1ch)
+ *	(D) CPU2 (2ch)  --/			   (TDM-1 : 2,3ch)
+ *	(E) CPU4 (2ch)  --/			   (TDM-2 : 4,5ch)
+ *	(F) CPU5 (2ch)  --/			   (TDM-3 : 6,7ch)
+ *	(G) CPU6 (6ch) <----  (6ch) (Z)	PCM3168A-c
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
+ *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
+ *	(C) aplay   -D plughw:0,2 xxx.wav (TDM-0)
+ *	(D) aplay   -D plughw:0,3 xxx.wav (TDM-1)
+ *	(E) aplay   -D plughw:0,4 xxx.wav (TDM-2)
+ *	(F) aplay   -D plughw:0,5 xxx.wav (TDM-3)
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(G) arecord -D plughw:0,6 xxx.wav
+ */
+&sound_card {
+	routing = "ak4613 Playback",   "DAI0 Playback",
+		  "ak4613 Playback",   "DAI1 Playback",
+		  "DAI0 Capture",      "ak4613 Capture",
+		  "pcm3168a Playback", "DAI2 Playback",
+		  "pcm3168a Playback", "DAI3 Playback",
+		  "pcm3168a Playback", "DAI4 Playback",
+		  "pcm3168a Playback", "DAI5 Playback",
+		  "DAI6 Capture",      "pcm3168a Capture";
+
+	/delete-property/ dais;
+	links = <&fe_a		/* (A) CPU0	  */
+		 &fe_b		/* (B) CPU1	  */
+		 &fe_c		/* (C) CPU2	  */
+		 &fe_d		/* (D) CPU3	  */
+		 &fe_e		/* (E) CPU4	  */
+		 &fe_f		/* (F) CPU5	  */
+		 &rsnd_g	/* (G) CPU6	  */
+		 &be_x		/* (X) ak4613	  */
+		 &be_y		/* (Y) PCM3168A-p */
+	>;
+
+	dpcm {
+		ports@0 {
+		/*
+		 * FE
+		 *
+		 * (A)/(B) are defined on ulcb
+		 * (C) CPU2
+		 * (D) CPU3
+		 * (E) CPU4
+		 * (F) CPU5
+		 */
+		fe_c:	port@2 { reg = <2>; fe_c_ep: endpoint { remote-endpoint = <&rsnd_c_ep>; }; };
+		fe_d:	port@3 { reg = <3>; fe_d_ep: endpoint { remote-endpoint = <&rsnd_d_ep>; }; };
+		fe_e:	port@4 { reg = <4>; fe_e_ep: endpoint { remote-endpoint = <&rsnd_e_ep>; }; };
+		fe_f:	port@5 { reg = <5>; fe_f_ep: endpoint { remote-endpoint = <&rsnd_f_ep>; }; };
+		};
+
+		ports@1 {
+		/*
+		 * BE
+		 *
+		 * (X) is defined on ulcb
+		 * (Y) PCM3168A-p
+		 */
+		be_y:	port@1 { reg = <1>; be_y_ep: endpoint { remote-endpoint = <&pcm3168a_y_ep>; }; };
+		};
+	};
+};
+
+&pcm3168a {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mclk-fs = <512>;
+		prefix = "pcm3168a";
+
+		/*
+		 * (Y) PCM3168A-p
+		 */
+		port@0 {
+			reg = <0>;
+			convert-channels = <8>; /* to 8ch TDM */
+			pcm3168a_y_ep: endpoint {
+				remote-endpoint = <&be_y_ep>;
+				clocks = <&clksndsel>;
+			};
+		};
+		/*
+		 * (Z) PCM3168A-c
+		 */
+		port@1 {
+			reg = <1>;
+			pcm3168a_z_ep: endpoint {
+				remote-endpoint = <&rsnd_g_ep>;
+				clocks = <&clksndsel>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		/* (A)/(B) are defined in ulcb.dtsi */
+
+		/*
+		 * (C) CPU2
+		 */
+		port@2 {
+			reg = <2>;
+			rsnd_c_ep: endpoint {
+				remote-endpoint = <&fe_c_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu30 &ssi3>;
+			};
+		};
+		/*
+		 * (D) CPU3
+		 */
+		port@3 {
+			reg = <3>;
+			rsnd_d_ep: endpoint {
+				remote-endpoint = <&fe_d_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu31 &ssi3>;
+			};
+		};
+		/*
+		 * (E) CPU4
+		 */
+		port@4 {
+			reg = <4>;
+			rsnd_e_ep: endpoint {
+				remote-endpoint = <&fe_e_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu32 &ssi3>;
+			};
+		};
+		/*
+		 * (F) CPU5
+		 */
+		port@5 {
+			reg = <5>;
+			rsnd_f_ep: endpoint {
+				remote-endpoint = <&fe_f_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu33 &ssi3>;
+			};
+		};
+		/*
+		 * (G) CPU6
+		 */
+		rsnd_g: port@6 {
+			reg = <6>;
+			rsnd_g_ep: endpoint {
+				remote-endpoint = <&pcm3168a_z_ep>;
+				bitclock-master;
+				frame-master;
+				capture = <&ssi4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi
new file mode 100644
index 0000000000..c30e056538
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Audio Graph Card2
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *	(C) CPU2  ----> PCM3168A-p (8ch)
+ *	(D) CPU3 <----  PCM3168A-c (6ch)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *	(C) aplay   -D plughw:0,2 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(D) arecord -D plughw:0,3 xxx.wav
+ */
+#include "ulcb-kf-audio-graph-card.dtsi"
+
+&sound_card {
+	/delete-property/ dais;
+	links = <&rsnd_port0	/* (A) CPU0 <-> ak4613 */
+		 &rsnd_port1	/* (B) CPU1  -> HDMI   */
+		 &rsnd_port2	/* (C) CPU2  -> PCM3168A-p */
+		 &rsnd_port3	/* (D) CPU3 <-  PCM3168A-c */
+		>;
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
new file mode 100644
index 0000000000..bc221f9944
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Simple Audio Card (MIX + TDM Split)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X)	ak4613	   (MIX-0)
+ *	(B) CPU1 (2ch)  --/			   (MIX-1)
+ *	(C) CPU3 (2ch)  ----> (8ch) (Y)	PCM3168A-p (TDM-0 : 0,1ch)
+ *	(D) CPU2 (2ch)  --/			   (TDM-1 : 2,3ch)
+ *	(E) CPU4 (2ch)  --/			   (TDM-2 : 4,5ch)
+ *	(F) CPU5 (2ch)  --/			   (TDM-3 : 6,7ch)
+ *	(G) CPU6 (6ch) <----  (6ch) (Z)	PCM3168A-c
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
+ *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
+ *	(C) aplay   -D plughw:0,2 xxx.wav (TDM-0)
+ *	(D) aplay   -D plughw:0,3 xxx.wav (TDM-1)
+ *	(E) aplay   -D plughw:0,4 xxx.wav (TDM-2)
+ *	(F) aplay   -D plughw:0,5 xxx.wav (TDM-3)
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(G) arecord -D plughw:0,6 xxx.wav
+ */
+
+&sound_card {
+
+	simple-audio-card,routing = "ak4613 Playback",   "DAI0 Playback",
+				    "ak4613 Playback",   "DAI1 Playback",
+				    "DAI0 Capture",      "ak4613 Capture",
+				    "pcm3168a Playback", "DAI2 Playback",
+				    "pcm3168a Playback", "DAI3 Playback",
+				    "pcm3168a Playback", "DAI4 Playback",
+				    "pcm3168a Playback", "DAI5 Playback";
+
+	/* dai-link@0 is defined in ulcb.dtsi */
+
+	simple-audio-card,dai-link@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		convert-channels = <8>; /* to 8ch TDM */
+
+		/*
+		 * (C) CPU2
+		 */
+		cpu@0 {
+			reg = <0>;
+			bitclock-master;
+			frame-master;
+			sound-dai = <&rcar_sound 2>;
+		};
+		/*
+		 * (D) CPU3
+		 */
+		cpu@1 {
+			reg = <1>;
+			sound-dai = <&rcar_sound 3>;
+		};
+		/*
+		 * (E) CPU4
+		 */
+		cpu@2 {
+			reg = <2>;
+			sound-dai = <&rcar_sound 4>;
+		};
+		/*
+		 * (F) CPU5
+		 */
+		cpu@3 {
+			reg = <3>;
+			sound-dai = <&rcar_sound 5>;
+		};
+		/*
+		 * (Y) PCM3168A-p
+		 */
+		codec {
+			prefix = "pcm3168a";
+			mclk-fs = <512>;
+			sound-dai = <&pcm3168a 0>;
+		};
+	};
+	simple-audio-card,dai-link@2 {
+		reg = <2>;
+		/*
+		 * (G) CPU6
+		 */
+		cpu {
+			bitclock-master;
+			frame-master;
+			sound-dai = <&rcar_sound 6>;
+		};
+		/*
+		 * (Z) PCM3168A-c
+		 */
+		codec {
+			prefix = "pcm3168a";
+			mclk-fs = <512>;
+			sound-dai = <&pcm3168a 1>;
+		};
+	};
+};
+
+&pcm3168a {
+	/*
+	 * (Y) PCM3168A-p
+	 * (Z) PCM3168A-c
+	 */
+	#sound-dai-cells = <1>;
+};
+
+&rcar_sound {
+	rcar_sound,dai {
+
+		/* dai0-1 are defined in ulcb.dtsi */
+
+		/*
+		 * (C) CPU2
+		 */
+		dai2 {
+			playback = <&ssiu30 &ssi3>;
+		};
+		/*
+		 * (D) CPU3
+		 */
+		dai3 {
+			playback = <&ssiu31 &ssi3>;
+		};
+		/*
+		 * (E) CPU4
+		 */
+		dai4 {
+			playback = <&ssiu32 &ssi3>;
+		};
+		/*
+		 * (F) CPU5
+		 */
+		dai5 {
+			playback = <&ssiu33 &ssi3>;
+		};
+		/*
+		 * (G) CPU6
+		 */
+		dai6 {
+			capture = <&ssi4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi
new file mode 100644
index 0000000000..2010e8ac7f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Simple Audio Card
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *	(C) CPU2  ----> PCM3168A-p
+ *	(D) CPU3 <----  PCM3168A-c
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *	(C) aplay   -D plughw:0,2 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(D) arecord -D plughw:0,3 xxx.wav
+ */
+
+&sound_card {
+	/* dai-link@0/1 are defined in ulcb.dtsi */
+
+	/*
+	 * (C) CPU2 -> PCM3168A-p
+	 */
+	simple-audio-card,dai-link@2 {
+		reg = <2>;
+		cpu {
+			bitclock-master;
+			frame-master;
+			dai-tdm-slot-num = <8>;
+			sound-dai = <&rcar_sound 2>;
+		};
+		codec {
+			mclk-fs = <512>;
+			sound-dai = <&pcm3168a 0>;
+		};
+	};
+	/*
+	 * (D) CPU3 <- PCM3168A-c
+	 */
+	simple-audio-card,dai-link@3 {
+		reg = <3>;
+		cpu {
+			bitclock-master;
+			frame-master;
+			dai-tdm-slot-num = <6>;
+			sound-dai = <&rcar_sound 3>;
+		};
+		codec {
+			mclk-fs = <512>;
+			sound-dai = <&pcm3168a 1>;
+		};
+	};
+};
+
+&pcm3168a {
+	/*
+	 * (C) CPU2 -> PCM3168A-p
+	 * (D) CPU3 <- PCM3168A-c
+	 */
+	#sound-dai-cells = <1>;
+};
+
+&rcar_sound {
+
+	rcar_sound,dai {
+		/* dai0-1 are defined in ulcb.dtsi */
+
+		/*
+		 * (C) CPU2 -> PCM3168A-p
+		 */
+		dai2 {
+			playback = <&ssi3>;
+		};
+		/*
+		 * (D) CPU3 <- PCM3168A-c
+		 */
+		dai3 {
+			capture = <&ssi4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
new file mode 100644
index 0000000000..3885ef3454
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Kingfisher (ULCB extension) board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+/ {
+	aliases {
+		serial1 = &hscif0;
+		serial2 = &scif1;
+		serial3 = &hscif1;
+		mmc2 = &sdhi3;
+	};
+
+	clksndsel: clksndsel {
+		#clock-cells = <0>;
+		compatible = "gpio-mux-clock";
+		clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */
+		select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
+	};
+
+	hdmi1-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con: endpoint {
+				remote-endpoint = <&adv7513_out>;
+			};
+		};
+	};
+
+	accel_3v3: regulator-acc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "accel-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	hdmi_1v8: regulator-hdmi-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	hdmi_3v3: regulator-hdmi-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	snd_3p3v: regulator-snd_3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "snd-3.3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	snd_vcc5v: regulator-snd_vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "snd-vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wlan_en: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&du {
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&adv7513_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	i2cmux2: i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+		/* HDMIoSDA, HDMIoSCL */
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			hdmi@3d {
+				compatible = "adi,adv7513";
+				reg = <0x3d>;
+
+				pinctrl-0 = <&hdmi1_pins>;
+				pinctrl-names = "default";
+
+				interrupt-parent = <&gpio2>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				clocks = <&cs2000>;
+				clock-names = "cec";
+
+				pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>;
+
+				avdd-supply = <&hdmi_1v8>;
+				dvdd-supply = <&hdmi_1v8>;
+				pvdd-supply = <&hdmi_1v8>;
+				dvdd-3v-supply = <&hdmi_3v3>;
+				bgvdd-supply = <&hdmi_1v8>;
+
+				adi,input-depth = <8>;
+				adi,input-colorspace = "rgb";
+				adi,input-clock = "1x";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						adv7513_in: endpoint {
+							remote-endpoint = <&du_out_rgb>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						adv7513_out: endpoint {
+							remote-endpoint = <&hdmi1_con>;
+						};
+					};
+				};
+			};
+		};
+
+		/* Audio_SDA, Audio_SCL */
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			accelerometer@1d {
+				compatible = "st,lsm9ds0-imu";
+				reg = <0x1d>;
+
+				vdd-supply = <&accel_3v3>;
+				vddio-supply = <&accel_3v3>;
+			};
+
+			pcm3168a: audio-codec@44 {
+				#sound-dai-cells = <0>;
+				compatible = "ti,pcm3168a";
+				reg = <0x44>;
+				clocks = <&clksndsel>;
+				clock-names = "scki";
+
+				VDD1-supply = <&snd_3p3v>;
+				VDD2-supply = <&snd_3p3v>;
+				VCCAD1-supply = <&snd_vcc5v>;
+				VCCAD2-supply = <&snd_vcc5v>;
+				VCCDA1-supply = <&snd_vcc5v>;
+				VCCDA2-supply = <&snd_vcc5v>;
+			};
+
+			gyroscope@6b {
+				compatible = "st,lsm9ds0-gyro";
+				reg = <0x6b>;
+
+				vdd-supply = <&accel_3v3>;
+				vddio-supply = <&accel_3v3>;
+			};
+		};
+	};
+
+	/* U11 */
+	gpio_exp_74: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		audio-out-off-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */
+			output-high;
+			line-name = "Audio_Out_OFF";
+		};
+
+		hub-pwen-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HUB pwen";
+		};
+
+		hub-rst-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HUB rst";
+		};
+
+		otg-extlpn-hog {
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "OTG EXTLPn";
+		};
+
+		otg-offvbusn-hog {
+			gpio-hog;
+			gpios = <8 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "OTG OFFVBUSn";
+		};
+
+		sd-wifi-mux-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-low;	/* Connect WL1837 */
+			line-name = "SD WiFi mux";
+		};
+
+		snd-rst-hog {
+			gpio-hog;
+			gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */
+			output-high;
+			line-name = "SND_RST";
+		};
+	};
+
+	/* U5 */
+	gpio_exp_75: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c4 {
+	i2cmux4: i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_exp_76: gpio@76 {
+		compatible = "ti,tca9539";
+		reg = <0x76>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio7>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	gpio_exp_77: gpio@77 {
+		compatible = "ti,tca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	hdmi1_pins: hdmi1 {
+		adv7513-interrupt {
+			pins = "GP_2_14";
+			bias-pull-up;
+		};
+
+		du {
+			groups = "du_rgb888", "du_sync", "du_clk_out_0",
+				 "du_disp";
+			function = "du";
+		};
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_b";
+		function = "scif1";
+	};
+
+	sdhi3_pins: sdhi3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <3300>;
+	};
+
+	sound_pcm_pins: sound-pcm {
+		groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins
+		     &sound_clk_pins
+		     &sound_pcm_pins>;
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en>;
+	vqmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	max-frequency = <26000000>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ssi4 {
+	shared-pin;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+/*
+ * For sound-test.
+ *
+ * We can switch Audio Card for testing
+ * see also ulcb.dtsi
+ *
+ * #include "ulcb-kf-simple-audio-card.dtsi"
+ * #include "ulcb-kf-simple-audio-card-mix+split.dtsi"
+ * #include "ulcb-kf-audio-graph-card.dtsi"
+ * #include "ulcb-kf-audio-graph-card-mix+split.dtsi"
+ * #include "ulcb-kf-audio-graph-card2-mix+split.dtsi"
+ */
+#include "ulcb-kf-audio-graph-card2.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi
new file mode 100644
index 0000000000..217d890198
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Simple Audio Card (MIXer)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X) ak4613	(MIX-0)
+ *	(B) CPU1 (2ch)  --/			(MIX-1)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+
+/ {
+	sound_card: sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "simple-scu-audio-card";
+		label = "rcar-sound";
+
+		simple-audio-card,prefix  = "ak4613";
+		simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback",
+					    "ak4613 Playback", "DAI1 Playback",
+					    "DAI0 Capture",    "ak4613 Capture";
+
+		simple-audio-card,dai-link@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			convert-rate = <48000>;
+
+			/*
+			 * (A) CPU0
+			 */
+			cpu@0 {
+				reg = <0>;
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 0>;
+			};
+			/*
+			 * (B) CPU1
+			 */
+			cpu@1 {
+				reg = <1>;
+				sound-dai = <&rcar_sound 1>;
+			};
+			/*
+			 * (X) ak4613
+			 */
+			codec {
+				prefix = "ak4613";
+				sound-dai = <&ak4613>;
+			};
+		};
+	};
+};
+
+&ak4613 {
+	/*
+	 * (X) ak4613
+	 */
+	#sound-dai-cells = <0>;
+};
+
+&rcar_sound {
+	#sound-dai-cells = <1>;
+
+	rcar_sound,dai {
+		/*
+		 * (A) CPU0
+		 */
+		dai0 {
+			playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+			capture  = <&ssi1 &src0 &dvc1>;
+		};
+		/*
+		 * (B) CPU1
+		 */
+		dai1 {
+			playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi
new file mode 100644
index 0000000000..751cfd8c52
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Simple Audio Card
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+
+/ {
+	sound_card: sound {
+		compatible = "simple-audio-card";
+		label = "rcar-sound";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * (A) CPU0 <-> ak4613
+		 */
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 0>;
+			};
+			codec {
+				sound-dai = <&ak4613>;
+			};
+		};
+		/*
+		 * (B) CPU1 -> HDMI
+		 */
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 1>;
+			};
+			codec {
+				sound-dai = <&hdmi0>;
+			};
+		};
+	};
+};
+
+&ak4613 {
+	/*
+	 * (A) CPU0 <-> ak4613
+	 */
+	#sound-dai-cells = <0>;
+};
+
+&hdmi0 {
+	/*
+	 * (B) CPU1 -> HDMI
+	 */
+	#sound-dai-cells = <0>;
+};
+
+&rcar_sound {
+	#sound-dai-cells = <1>;
+
+	rcar_sound,dai {
+		/*
+		 * (A) CPU0 <-> ak4613
+		 */
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+		/*
+		 * (B) CPU1 -> HDMI
+		 */
+		dai1 {
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
new file mode 100644
index 0000000000..0be2716659
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car Gen3 ULCB board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas R-Car Gen3 ULCB board";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c_dvfs;
+		serial0 = &scif2;
+		ethernet0 = &avb;
+		mmc0 = &sdhi2;
+		mmc1 = &sdhi0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	x23_clk: x23-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&a57_0 {
+	cpu-supply = <&dvfs>;
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5925";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0xf>;
+		rohm,rstbmode-pulse;
+
+		regulators {
+			dvfs: dvfs {
+				regulator-name = "dvfs";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1030000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+};
+
+&rpc {
+	/* Left disabled.  To be enabled by firmware when unlocked. */
+
+	flash@0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			bl2@40000 {
+				reg = <0x00040000 0x140000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x040000>;
+				read-only;
+			};
+			tee@200000 {
+				reg = <0x00200000 0x440000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x100000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+
+/*
+ * For sound-test.
+ *
+ * We can switch Audio Card for testing
+ *
+ * #include "ulcb-simple-audio-card.dtsi"
+ * #include "ulcb-simple-audio-card-mix+split.dtsi"
+ * #include "ulcb-audio-graph-card.dtsi"
+ * #include "ulcb-audio-graph-card-mix+split.dtsi"
+ * #include "ulcb-audio-graph-card2-mix+split.dtsi"
+ */
+#include "ulcb-audio-graph-card2.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
new file mode 100644
index 0000000000..e7728007fd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-dumo.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s-enterprise.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinephone-pro.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4c-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4se.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
new file mode 100644
index 0000000000..3429e124d9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+	aliases {
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";	/* +5V */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&xin32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+	};
+
+	vcc3v3_btreg: vcc3v3-btreg {
+		compatible = "regulator-gpio";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable_h>;
+		regulator-name = "btreg-gpio-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		states = <3300000 0x0>;
+	};
+
+	vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_rf_aux_mod";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	xin32k: xin32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&sdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_3v3>;	/* +3V3_SOM */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	vmmc-supply = <&vcc_3v3>;	/* +3V3_SOM */
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
new file mode 100644
index 0000000000..80db778c96
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio_pwrseq {
+	reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+};
+
+&vcc3v3_btreg {
+	enable-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
new file mode 100644
index 0000000000..449b8eb645
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	panel {
+		compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		power-supply = <&vcc3v3_lcd>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out_panel>;
+			};
+		};
+	};
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+/* LVDS_B(secondary) */
+&lvds {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			lvds_out_panel: endpoint {
+				remote-endpoint = <&panel_in_lvds>;
+			};
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2-of10.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2-of10.dts
new file mode 100644
index 0000000000..47aa30505a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2-of10.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+	model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame";
+	compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core",
+		     "rockchip,px30";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	panel {
+		compatible = "ampire,am-1280800n3tzqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&vcc3v3_lcd>;
+		data-mapping = "vesa-24";
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out_panel>;
+			};
+		};
+	};
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&lvds {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			lvds_out_panel: endpoint {
+				remote-endpoint = <&panel_in_lvds>;
+			};
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2.dts
new file mode 100644
index 0000000000..5a0ecb8fae
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+	model = "Engicam PX30.Core C.TOUCH 2.0";
+	compatible = "engicam,px30-core-ctouch2", "engicam,px30-core",
+		     "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
new file mode 100644
index 0000000000..165d09ccb9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-edimm2.2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+	model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
+	compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core",
+		     "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio_pwrseq {
+	reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
+};
+
+&vcc3v3_btreg {
+	enable-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
new file mode 100644
index 0000000000..5eecbefa8a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+	compatible = "engicam,px30-core", "rockchip,px30";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG5 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG1 {
+				regulator-name = "vcc_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v0_pmu: LDO_REG4 {
+				regulator-name = "vcc3v0_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v3_lcd: SWITCH_REG1 {
+				regulator-boot-on;
+				regulator-name = "vcc3v3_lcd";
+			};
+
+			vcc5v0_host: SWITCH_REG2 {
+				regulator-name = "vcc5v0_host";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_3v3>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3>;
+	pmuio2-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
new file mode 100644
index 0000000000..c1bbd555f5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+	model = "Rockchip PX30 EVB";
+	compatible = "rockchip,px30-evb", "rockchip,px30";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdio;
+		mmc2 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-esc {
+			label = "esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1310000>;
+		};
+
+		button-home {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <624000>;
+		};
+
+		button-menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <987000>;
+		};
+
+		button-down {
+			label = "volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		button-up {
+			label = "volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 25000 0>;
+		power-supply = <&vcc3v3_lcd>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+	};
+
+	vcc5v0_sys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&csi_dphy {
+	status = "okay";
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "xinpeng,xpp055c272";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		vci-supply = <&vcc3v3_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v0>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_rmii>;
+	snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0: vcc_rmii: DCDC_REG4 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG5 {
+				regulator-name = "vcc3v3_sys";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG1 {
+				regulator-name = "vcc_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v0_pmu: LDO_REG4 {
+				regulator-name = "vcc3v0_pmu";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG7 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v5_dvp: LDO_REG9 {
+				regulator-name = "vcc1v5_dvp";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc3v3_lcd: SWITCH_REG1 {
+				regulator-name = "vcc3v3_lcd";
+				regulator-boot-on;
+			};
+
+			vcc5v0_host: SWITCH_REG2 {
+				regulator-name = "vcc5v0_host";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	sensor@d {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0x0d>;
+		gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc3v0_pmu>;
+		mount-matrix = "1", /* x0 */
+			       "0", /* y0 */
+			       "0", /* z0 */
+			       "0", /* x1 */
+			       "1", /* y1 */
+			       "0", /* z1 */
+			       "0", /* x2 */
+			       "0", /* y2 */
+			       "1"; /* z2 */
+	};
+
+	touchscreen@14 {
+		compatible = "goodix,gt1151";
+		reg = <0x14>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&vcc3v3_lcd>;
+	};
+
+	sensor@4c {
+		compatible = "fsl,mma7660";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	/* These are relatively safe rise/fall times; TODO: measure */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	ov5695: ov5695@36 {
+		compatible = "ovti,ov5695";
+		reg = <0x36>;
+		avdd-supply = <&vcc2v8_dvp>;
+		clocks = <&cru SCLK_CIF_OUT>;
+		clock-names = "xvclk";
+		dvdd-supply = <&vcc1v5_dvp>;
+		dovdd-supply = <&vcc1v8_dvp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
+		reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
+
+		port {
+			ucam_out: endpoint {
+				remote-endpoint = <&mipi_in_ucam>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vccio_sdio>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v0>;
+	vccio4-supply = <&vcc3v0_pmu>;
+	vccio5-supply = <&vcc_3v0>;
+	vccio6-supply = <&vccio_flash>;
+};
+
+&isp {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_in_ucam: endpoint@0 {
+				reg = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ucam_out>;
+			};
+		};
+	};
+};
+
+&isp_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins =
+				<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins =
+				<0 RK_PA4 1 &pcfg_pull_none>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins =
+				<0 RK_PA4 2 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cif-m0 {
+		cif_clkout_m0: cif-clkout-m0 {
+			rockchip,pins =
+				<2 RK_PB3 1 &pcfg_pull_none_12ma>;
+		};
+	};
+
+	mipi {
+		mipi_pdn: mipi-pdn {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmuio1-supply = <&vcc3v0_pmu>;
+	pmuio2-supply = <&vcc3v0_pmu>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdio {
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	non-removable;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
new file mode 100644
index 0000000000..de0a1f2af9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30-ringneck.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit";
+	compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
+
+	aliases {
+		mmc2 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&haikou_keys_pin>;
+		pinctrl-names = "default";
+
+		button-batlow-n {
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-slp-btn-n {
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wake-n {
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
+
+		sd_card_led: led-1 {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+			function = LED_FUNCTION_SD;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	i2s0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,frame-master = <&sgtl5000_codec>;
+		simple-audio-card,bitclock-master = <&sgtl5000_codec>;
+
+		sgtl5000_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			// Prevent the dai subsystem from overwriting the clock
+			// frequency. We are using a fixed-frequency oscillator.
+			system-clock-fixed;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <24576000>;
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdda_codec: vdda-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vddd_codec: vddd-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vdda_codec>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+		VDDD-supply = <&vddd_codec>;
+	};
+};
+
+&i2c3 {
+	eeprom@50 {
+		reg = <0x50>;
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		size = <128>;
+		vcc-supply = <&vcc3v3_baseboard>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pinctrl {
+	haikou {
+		haikou_keys_pin: haikou-keys-pin {
+			rockchip,pins =
+			  /* WAKE# */
+			  <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* SLP_BTN# */
+			  <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* LID_BTN */
+			  <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BATLOW# */
+			  <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BIOS_DISABLE# */
+			  <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sd_card_led_pin: sd-card-led-pin {
+			rockchip,pins =
+			  <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&uart5_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
new file mode 100644
index 0000000000..1239775583
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdio;
+		rtc0 = &rtc_twi;
+		rtc1 = &rk809;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pin>;
+		status = "okay";
+
+		module_led: led-0 {
+			gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+
+	vcc5v0_sys: vccsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	supports-emmc;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_emmc>;
+
+	status = "okay";
+};
+
+/* On-module TI DP83825I PHY but no connector, enable in carrierboard */
+&gmac {
+	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	phy-supply = <&vcc_3v3>;
+	clock_in_out = "output";
+};
+
+&gpio2 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module
+	 * eMMC powered-down initially (in fact it keeps the reset signal
+	 * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after
+	 * the SPL has been booted from SD Card.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PB5 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "bios_disable_override";
+		gpio-hog;
+	};
+
+	/*
+	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+	 * signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually
+	 * represents the state of a switch on the baseboard.
+	 */
+	bios-disable-n-hog {
+		gpios = <RK_PC2 GPIO_ACTIVE_LOW>;
+		line-name = "bios_disable";
+		input;
+		gpio-hog;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int>;
+		pinctrl-names = "default";
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_3v3>;
+		vcc6-supply = <&vcc_3v3>;
+		vcc7-supply = <&vcc_3v3>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
+				regulator-name = "vcc_3v0_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_3v3: DCDC_REG5 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG3 {
+				regulator-name = "vcc_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vcc_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8_lcd: LDO_REG8 {
+				regulator-name = "vcc_1v8_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG9 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* SE05x is limited to Fast Mode */
+	clock-frequency = <400000>;
+
+	fan: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	rockchip,trcm-sync-tx-only;
+
+	pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx
+		     &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>;
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_emmc>;
+	vccio-oscgpi-supply = <&vcc_3v3>;
+
+	status = "okay";
+};
+
+&pinctrl {
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		module_led_pin: module-led-pin {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+/* Mule UCAN */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
new file mode 100644
index 0000000000..42ce78beb4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -0,0 +1,2440 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/px30-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/px30-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,px30";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000 950000 1350000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1050000 1050000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1175000 1175000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopb_out>, <&vopl_out>;
+		status = "disabled";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	thermal_zones: thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <750>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point-0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point-1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: soc-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_threshold: gpu-threshold {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_target: gpu-target {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_target>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	pmu: power-management@ff000000 {
+		compatible = "rockchip,px30-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff000000 0x0 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,px30-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_LOGIC */
+			power-domain@PX30_PD_USB {
+				reg = <PX30_PD_USB>;
+				clocks = <&cru HCLK_HOST>,
+					 <&cru HCLK_OTG>,
+					 <&cru SCLK_OTG_ADP>;
+				pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_SDCARD {
+				reg = <PX30_PD_SDCARD>;
+				clocks = <&cru HCLK_SDMMC>,
+					 <&cru SCLK_SDMMC>;
+				pm_qos = <&qos_sdmmc>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_GMAC {
+				reg = <PX30_PD_GMAC>;
+				clocks = <&cru ACLK_GMAC>,
+					 <&cru PCLK_GMAC>,
+					 <&cru SCLK_MAC_REF>,
+					 <&cru SCLK_GMAC_RX_TX>;
+				pm_qos = <&qos_gmac>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_MMC_NAND {
+				reg = <PX30_PD_MMC_NAND>;
+				clocks = <&cru HCLK_NANDC>,
+					 <&cru HCLK_EMMC>,
+					 <&cru HCLK_SDIO>,
+					 <&cru HCLK_SFC>,
+					 <&cru SCLK_EMMC>,
+					 <&cru SCLK_NANDC>,
+					 <&cru SCLK_SDIO>,
+					 <&cru SCLK_SFC>;
+				pm_qos = <&qos_emmc>, <&qos_nand>,
+					 <&qos_sdio>, <&qos_sfc>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_VPU {
+				reg = <PX30_PD_VPU>;
+				clocks = <&cru ACLK_VPU>,
+					 <&cru HCLK_VPU>,
+					 <&cru SCLK_CORE_VPU>;
+				pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_VO {
+				reg = <PX30_PD_VO>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru ACLK_VOPB>,
+					 <&cru ACLK_VOPL>,
+					 <&cru DCLK_VOPB>,
+					 <&cru DCLK_VOPL>,
+					 <&cru HCLK_RGA>,
+					 <&cru HCLK_VOPB>,
+					 <&cru HCLK_VOPL>,
+					 <&cru PCLK_MIPI_DSI>,
+					 <&cru SCLK_RGA_CORE>,
+					 <&cru SCLK_VOPB_PWM>;
+				pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
+					 <&qos_vop_m0>, <&qos_vop_m1>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_VI {
+				reg = <PX30_PD_VI>;
+				clocks = <&cru ACLK_CIF>,
+					 <&cru ACLK_ISP>,
+					 <&cru HCLK_CIF>,
+					 <&cru HCLK_ISP>,
+					 <&cru SCLK_ISP>;
+				pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
+					 <&qos_isp_wr>, <&qos_isp_m1>,
+					 <&qos_vip>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_GPU {
+				reg = <PX30_PD_GPU>;
+				clocks = <&cru SCLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	pmugrf: syscon@ff010000 {
+		compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xff010000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,px30-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x200>;
+			mode-bootloader = <BOOT_BL_DOWNLOAD>;
+			mode-fastboot = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+		};
+	};
+
+	uart0: serial@ff030000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff030000 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 0>, <&dmac 1>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	i2s0_8ch: i2s@ff060000 {
+		compatible = "rockchip,px30-i2s-tdm";
+		reg = <0x0 0xff060000 0x0 0x1000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0_TX>, <&cru SCLK_I2S0_RX>, <&cru HCLK_I2S0>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac 16>, <&dmac 17>;
+		dma-names = "tx", "rx";
+		rockchip,grf = <&grf>;
+		resets = <&cru SRST_I2S0_TX>, <&cru SRST_I2S0_RX>;
+		reset-names = "tx-m", "rx-m";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_sclkrx
+			     &i2s0_8ch_lrcktx &i2s0_8ch_lrckrx
+			     &i2s0_8ch_sdo0 &i2s0_8ch_sdi0
+			     &i2s0_8ch_sdo1 &i2s0_8ch_sdi1
+			     &i2s0_8ch_sdo2 &i2s0_8ch_sdi2
+			     &i2s0_8ch_sdo3 &i2s0_8ch_sdi3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1_2ch: i2s@ff070000 {
+		compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff070000 0x0 0x1000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 18>, <&dmac 19>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck
+			     &i2s1_2ch_sdi &i2s1_2ch_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2_2ch: i2s@ff080000 {
+		compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff080000 0x0 0x1000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 20>, <&dmac 21>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck
+			     &i2s2_2ch_sdi &i2s2_2ch_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@ff131000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0xff131000 0 0x1000>,
+		      <0x0 0xff132000 0 0x2000>,
+		      <0x0 0xff134000 0 0x2000>,
+		      <0x0 0xff136000 0 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	grf: syscon@ff140000 {
+		compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,px30-io-voltage-domain";
+			status = "disabled";
+		};
+
+		lvds: lvds {
+			compatible = "rockchip,px30-lvds";
+			phys = <&dsi_dphy>;
+			phy-names = "dphy";
+			rockchip,grf = <&grf>;
+			rockchip,output = "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				lvds_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					lvds_vopb_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vopb_out_lvds>;
+					};
+
+					lvds_vopl_in: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vopl_out_lvds>;
+					};
+				};
+
+				lvds_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+
+	uart1: serial@ff158000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff158000 0x0 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 2>, <&dmac 3>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff160000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff160000 0x0 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 4>, <&dmac 5>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff168000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff168000 0x0 0x100>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 6>, <&dmac 7>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff170000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff170000 0x0 0x100>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 8>, <&dmac 9>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
+		status = "disabled";
+	};
+
+	uart5: serial@ff178000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff178000 0x0 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 10>, <&dmac 11>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff180000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff180000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff190000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff190000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff1a0000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff1a0000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff1b0000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff1b0000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff1d0000 {
+		compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1d0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac 12>, <&dmac 13>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff1d8000 {
+		compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1d8000 0x0 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac 14>, <&dmac 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@ff1e0000 {
+		compatible = "rockchip,px30-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff1e0000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT_NS>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff200000 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff200010 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff200020 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff200030 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@ff208000 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm4_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@ff208010 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm5_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@ff208020 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm6_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@ff208030 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm7_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	rktimer: timer@ff210000 {
+		compatible = "rockchip,px30-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xff210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	dmac: dma-controller@ff240000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff240000 0x0 0x4000>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,px30-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <120000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&tsadc_otp_pin>;
+		pinctrl-1 = <&tsadc_otp_out>;
+		pinctrl-2 = <&tsadc_otp_pin>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	saradc: saradc@ff288000 {
+		compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xff288000 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	otp: nvmem@ff290000 {
+		compatible = "rockchip,px30-otp";
+		reg = <0x0 0xff290000 0x0 0x4000>;
+		clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
+			 <&cru PCLK_OTP_PHY>;
+		clock-names = "otp", "apb_pclk", "phy";
+		resets = <&cru SRST_OTP_PHY>;
+		reset-names = "phy";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Data cells */
+		cpu_id: id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpu_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		performance: performance@1e {
+			reg = <0x1e 0x1>;
+			bits = <4 3>;
+		};
+	};
+
+	cru: clock-controller@ff2b0000 {
+		compatible = "rockchip,px30-cru";
+		reg = <0x0 0xff2b0000 0x0 0x1000>;
+		clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+		clock-names = "xin24m", "gpll";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+
+		assigned-clocks = <&cru PLL_NPLL>,
+			<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+			<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+			<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+		assigned-clock-rates = <1188000000>,
+			<200000000>, <200000000>,
+			<150000000>, <150000000>,
+			<100000000>, <200000000>;
+	};
+
+	pmucru: clock-controller@ff2bc000 {
+		compatible = "rockchip,px30-pmucru";
+		reg = <0x0 0xff2bc000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+
+		assigned-clocks =
+			<&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
+			<&pmucru SCLK_WIFI_PMU>;
+		assigned-clock-rates =
+			<1200000000>, <100000000>,
+			<26000000>;
+	};
+
+	usb2phy_grf: syscon@ff2c0000 {
+		compatible = "rockchip,px30-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xff2c0000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2phy@100 {
+			compatible = "rockchip,px30-usb2phy";
+			reg = <0x100 0x20>;
+			clocks = <&pmucru SCLK_USBPHY_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			clock-output-names = "usb480m_phy";
+			status = "disabled";
+
+			u2phy_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+	};
+
+	dsi_dphy: phy@ff2e0000 {
+		compatible = "rockchip,px30-dsi-dphy";
+		reg = <0x0 0xff2e0000 0x0 0x10000>;
+		clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
+		clock-names = "ref", "pclk";
+		resets = <&cru SRST_MIPIDSIPHY_P>;
+		reset-names = "apb";
+		#phy-cells = <0>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+	};
+
+	csi_dphy: phy@ff2f0000 {
+		compatible = "rockchip,px30-csi-dphy";
+		reg = <0x0 0xff2f0000 0x0 0x4000>;
+		clocks = <&cru PCLK_MIPICSIPHY>;
+		clock-names = "pclk";
+		#phy-cells = <0>;
+		power-domains = <&power PX30_PD_VI>;
+		resets = <&cru SRST_MIPICSIPHY_P>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	usb20_otg: usb@ff300000 {
+		compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff300000 0x0 0x40000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		power-domains = <&power PX30_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff340000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff340000 0x0 0x10000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		power-domains = <&power PX30_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@ff350000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff350000 0x0 0x10000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		power-domains = <&power PX30_PD_USB>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff360000 {
+		compatible = "rockchip,px30-gmac";
+		reg = <0x0 0xff360000 0x0 0x10000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>,
+			 <&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>,
+			 <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac", "clk_mac_speed";
+		rockchip,grf = <&grf>;
+		phy-mode = "rmii";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
+		power-domains = <&power PX30_PD_GMAC>;
+		resets = <&cru SRST_GMAC_A>;
+		reset-names = "stmmaceth";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@ff370000 {
+		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff370000 0x0 0x4000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <4>;
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+		power-domains = <&power PX30_PD_SDCARD>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ff380000 {
+		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff380000 0x0 0x4000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <4>;
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	emmc: mmc@ff390000 {
+		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff390000 0x0 0x4000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <8>;
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	sfc: spi@ff3a0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xff3a0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	nfc: nand-controller@ff3b0000 {
+		compatible = "rockchip,px30-nfc";
+		reg = <0x0 0xff3b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+		clock-names = "ahb", "nfc";
+		assigned-clocks = <&cru SCLK_NANDC>;
+		assigned-clock-rates = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
+			     &flash_rdn &flash_rdy &flash_wrn &flash_dqs>;
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	gpu: gpu@ff400000 {
+		compatible = "rockchip,px30-mali", "arm,mali-bifrost";
+		reg = <0x0 0xff400000 0x0 0x4000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru SCLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power PX30_PD_GPU>;
+		operating-points-v2 = <&gpu_opp_table>;
+		status = "disabled";
+	};
+
+	vpu: video-codec@ff442000 {
+		compatible = "rockchip,px30-vpu";
+		reg = <0x0 0xff442000 0x0 0x800>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power PX30_PD_VPU>;
+	};
+
+	vpu_mmu: iommu@ff442800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff442800 0x0 0x100>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power PX30_PD_VPU>;
+	};
+
+	dsi: dsi@ff450000 {
+		compatible = "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI_DSI>;
+		clock-names = "pclk";
+		phys = <&dsi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VO>;
+		resets = <&cru SRST_MIPIDSI_HOST_P>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dsi>;
+				};
+
+				dsi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dsi>;
+				};
+			};
+
+			dsi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	vopb: vop@ff460000 {
+		compatible = "rockchip,px30-vop-big";
+		reg = <0x0 0xff460000 0x0 0xefc>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>,
+			 <&cru HCLK_VOPB>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopb_mmu>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopb_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopb>;
+			};
+
+			vopb_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopb_in>;
+			};
+		};
+	};
+
+	vopb_mmu: iommu@ff460f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff460f00 0x0 0x100>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power PX30_PD_VO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff470000 {
+		compatible = "rockchip,px30-vop-lit";
+		reg = <0x0 0xff470000 0x0 0xefc>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>,
+			 <&cru HCLK_VOPL>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopl_mmu>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopl_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopl>;
+			};
+
+			vopl_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopl_in>;
+			};
+		};
+	};
+
+	vopl_mmu: iommu@ff470f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff470f00 0x0 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power PX30_PD_VO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp: isp@ff4a0000 {
+		compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/
+		reg = <0x0 0xff4a0000 0x0 0x8000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "isp", "mi", "mipi";
+		clocks = <&cru SCLK_ISP>,
+			 <&cru ACLK_ISP>,
+			 <&cru HCLK_ISP>,
+			 <&cru PCLK_ISP>;
+		clock-names = "isp", "aclk", "hclk", "pclk";
+		iommus = <&isp_mmu>;
+		phys = <&csi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VI>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	isp_mmu: iommu@ff4a8000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff4a8000 0x0 0x100>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power PX30_PD_VI>;
+		rockchip,disable-mmu-reset;
+		#iommu-cells = <0>;
+	};
+
+	qos_gmac: qos@ff518000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff518000 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ff520000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff520000 0x0 0x20>;
+	};
+
+	qos_sdmmc: qos@ff52c000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff52c000 0x0 0x20>;
+	};
+
+	qos_emmc: qos@ff538000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff538000 0x0 0x20>;
+	};
+
+	qos_nand: qos@ff538080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff538080 0x0 0x20>;
+	};
+
+	qos_sdio: qos@ff538100 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff538100 0x0 0x20>;
+	};
+
+	qos_sfc: qos@ff538180 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff538180 0x0 0x20>;
+	};
+
+	qos_usb_host: qos@ff540000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff540000 0x0 0x20>;
+	};
+
+	qos_usb_otg: qos@ff540080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff540080 0x0 0x20>;
+	};
+
+	qos_isp_128: qos@ff548000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548000 0x0 0x20>;
+	};
+
+	qos_isp_rd: qos@ff548080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548080 0x0 0x20>;
+	};
+
+	qos_isp_wr: qos@ff548100 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548100 0x0 0x20>;
+	};
+
+	qos_isp_m1: qos@ff548180 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548180 0x0 0x20>;
+	};
+
+	qos_vip: qos@ff548200 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548200 0x0 0x20>;
+	};
+
+	qos_rga_rd: qos@ff550000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff550000 0x0 0x20>;
+	};
+
+	qos_rga_wr: qos@ff550080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff550080 0x0 0x20>;
+	};
+
+	qos_vop_m0: qos@ff550100 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff550100 0x0 0x20>;
+	};
+
+	qos_vop_m1: qos@ff550180 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff550180 0x0 0x20>;
+	};
+
+	qos_vpu: qos@ff558000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff558000 0x0 0x20>;
+	};
+
+	qos_vpu_r128: qos@ff558080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff558080 0x0 0x20>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,px30-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff040000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff040000 0x0 0x100>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmucru PCLK_GPIO0_PMU>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff250000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff250000 0x0 0x100>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff260000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff260000 0x0 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff270000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff270000 0x0 0x100>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+			bias-disable;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+			bias-pull-up;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_smt: pcfg-pull-none-smt {
+			bias-disable;
+			input-schmitt-enable;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		pcfg_input: pcfg-input {
+			input-enable;
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins =
+					<0 RK_PB0 1 &pcfg_pull_none_smt>,
+					<0 RK_PB1 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins =
+					<0 RK_PC2 1 &pcfg_pull_none_smt>,
+					<0 RK_PC3 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none_smt>,
+					<2 RK_PC0 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins =
+					<1 RK_PB4 4 &pcfg_pull_none_smt>,
+					<1 RK_PB5 4 &pcfg_pull_none_smt>;
+			};
+		};
+
+		tsadc {
+			tsadc_otp_pin: tsadc-otp-pin {
+				rockchip,pins =
+					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			tsadc_otp_out: tsadc-otp-out {
+				rockchip,pins =
+					<0 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins =
+					<0 RK_PB2 1 &pcfg_pull_up>,
+					<0 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins =
+					<0 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins =
+					<0 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins =
+					<1 RK_PC1 1 &pcfg_pull_up>,
+					<1 RK_PC0 1 &pcfg_pull_up>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins =
+					<1 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins =
+					<1 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2-m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins =
+					<1 RK_PD2 2 &pcfg_pull_up>,
+					<1 RK_PD3 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart2-m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins =
+					<2 RK_PB4 2 &pcfg_pull_up>,
+					<2 RK_PB6 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart3-m0 {
+			uart3m0_xfer: uart3m0-xfer {
+				rockchip,pins =
+					<0 RK_PC0 2 &pcfg_pull_up>,
+					<0 RK_PC1 2 &pcfg_pull_up>;
+			};
+
+			uart3m0_cts: uart3m0-cts {
+				rockchip,pins =
+					<0 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			uart3m0_rts: uart3m0-rts {
+				rockchip,pins =
+					<0 RK_PC3 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart3-m1 {
+			uart3m1_xfer: uart3m1-xfer {
+				rockchip,pins =
+					<1 RK_PB6 2 &pcfg_pull_up>,
+					<1 RK_PB7 2 &pcfg_pull_up>;
+			};
+
+			uart3m1_cts: uart3m1-cts {
+				rockchip,pins =
+					<1 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			uart3m1_rts: uart3m1-rts {
+				rockchip,pins =
+					<1 RK_PB5 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins =
+					<1 RK_PD4 2 &pcfg_pull_up>,
+					<1 RK_PD5 2 &pcfg_pull_up>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins =
+					<1 RK_PD6 2 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins =
+					<1 RK_PD7 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart5 {
+			uart5_xfer: uart5-xfer {
+				rockchip,pins =
+					<3 RK_PA2 4 &pcfg_pull_up>,
+					<3 RK_PA1 4 &pcfg_pull_up>;
+			};
+
+			uart5_cts: uart5-cts {
+				rockchip,pins =
+					<3 RK_PA3 4 &pcfg_pull_none>;
+			};
+
+			uart5_rts: uart5-rts {
+				rockchip,pins =
+					<3 RK_PA5 4 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins =
+					<1 RK_PB7 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_csn: spi0-csn {
+				rockchip,pins =
+					<1 RK_PB6 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_miso: spi0-miso {
+				rockchip,pins =
+					<1 RK_PB5 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_mosi: spi0-mosi {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_clk_hs: spi0-clk-hs {
+				rockchip,pins =
+					<1 RK_PB7 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi0_miso_hs: spi0-miso-hs {
+				rockchip,pins =
+					<1 RK_PB5 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi0_mosi_hs: spi0-mosi-hs {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins =
+					<3 RK_PB7 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_csn0: spi1-csn0 {
+				rockchip,pins =
+					<3 RK_PB1 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_csn1: spi1-csn1 {
+				rockchip,pins =
+					<3 RK_PB2 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_miso: spi1-miso {
+				rockchip,pins =
+					<3 RK_PB6 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_mosi: spi1-mosi {
+				rockchip,pins =
+					<3 RK_PB4 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_clk_hs: spi1-clk-hs {
+				rockchip,pins =
+					<3 RK_PB7 4 &pcfg_pull_up_8ma>;
+			};
+
+			spi1_miso_hs: spi1-miso-hs {
+				rockchip,pins =
+					<3 RK_PB6 4 &pcfg_pull_up_8ma>;
+			};
+
+			spi1_mosi_hs: spi1-mosi-hs {
+				rockchip,pins =
+					<3 RK_PB4 4 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		pdm {
+			pdm_clk0m0: pdm-clk0m0 {
+				rockchip,pins =
+					<3 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			pdm_clk0m1: pdm-clk0m1 {
+				rockchip,pins =
+					<2 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			pdm_clk1: pdm-clk1 {
+				rockchip,pins =
+					<3 RK_PC7 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi0m0: pdm-sdi0m0 {
+				rockchip,pins =
+					<3 RK_PD3 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi0m1: pdm-sdi0m1 {
+				rockchip,pins =
+					<2 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi1: pdm-sdi1 {
+				rockchip,pins =
+					<3 RK_PD0 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi2: pdm-sdi2 {
+				rockchip,pins =
+					<3 RK_PD1 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi3: pdm-sdi3 {
+				rockchip,pins =
+					<3 RK_PD2 2 &pcfg_pull_none>;
+			};
+
+			pdm_clk0m0_sleep: pdm-clk0m0-sleep {
+				rockchip,pins =
+					<3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_clk0m_sleep1: pdm-clk0m1-sleep {
+				rockchip,pins =
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_clk1_sleep: pdm-clk1-sleep {
+				rockchip,pins =
+					<3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi0m0_sleep: pdm-sdi0m0-sleep {
+				rockchip,pins =
+					<3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi0m1_sleep: pdm-sdi0m1-sleep {
+				rockchip,pins =
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi1_sleep: pdm-sdi1-sleep {
+				rockchip,pins =
+					<3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi2_sleep: pdm-sdi2-sleep {
+				rockchip,pins =
+					<3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi3_sleep: pdm-sdi3-sleep {
+				rockchip,pins =
+					<3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		i2s0 {
+			i2s0_8ch_mclk: i2s0-8ch-mclk {
+				rockchip,pins =
+					<3 RK_PC1 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sclktx: i2s0-8ch-sclktx {
+				rockchip,pins =
+					<3 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sclkrx: i2s0-8ch-sclkrx {
+				rockchip,pins =
+					<3 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_lrcktx: i2s0-8ch-lrcktx {
+				rockchip,pins =
+					<3 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_lrckrx: i2s0-8ch-lrckrx {
+				rockchip,pins =
+					<3 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo0: i2s0-8ch-sdo0 {
+				rockchip,pins =
+					<3 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo1: i2s0-8ch-sdo1 {
+				rockchip,pins =
+					<3 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo2: i2s0-8ch-sdo2 {
+				rockchip,pins =
+					<3 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo3: i2s0-8ch-sdo3 {
+				rockchip,pins =
+					<3 RK_PB6 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi0: i2s0-8ch-sdi0 {
+				rockchip,pins =
+					<3 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi1: i2s0-8ch-sdi1 {
+				rockchip,pins =
+					<3 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi2: i2s0-8ch-sdi2 {
+				rockchip,pins =
+					<3 RK_PB1 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi3: i2s0-8ch-sdi3 {
+				rockchip,pins =
+					<3 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2s1 {
+			i2s1_2ch_mclk: i2s1-2ch-mclk {
+				rockchip,pins =
+					<2 RK_PC3 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_sclk: i2s1-2ch-sclk {
+				rockchip,pins =
+					<2 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_lrck: i2s1-2ch-lrck {
+				rockchip,pins =
+					<2 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_sdi: i2s1-2ch-sdi {
+				rockchip,pins =
+					<2 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_sdo: i2s1-2ch-sdo {
+				rockchip,pins =
+					<2 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s2 {
+			i2s2_2ch_mclk: i2s2-2ch-mclk {
+				rockchip,pins =
+					<3 RK_PA1 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_sclk: i2s2-2ch-sclk {
+				rockchip,pins =
+					<3 RK_PA2 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_lrck: i2s2-2ch-lrck {
+				rockchip,pins =
+					<3 RK_PA3 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_sdi: i2s2-2ch-sdi {
+				rockchip,pins =
+					<3 RK_PA5 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_sdo: i2s2-2ch-sdo {
+				rockchip,pins =
+					<3 RK_PA7 2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins =
+					<1 RK_PD6 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins =
+					<1 RK_PD7 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc_det: sdmmc-det {
+				rockchip,pins =
+					<0 RK_PA3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins =
+					<1 RK_PD2 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins =
+					<1 RK_PD2 1 &pcfg_pull_up_8ma>,
+					<1 RK_PD3 1 &pcfg_pull_up_8ma>,
+					<1 RK_PD4 1 &pcfg_pull_up_8ma>,
+					<1 RK_PD5 1 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins =
+					<1 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins =
+					<1 RK_PC4 1 &pcfg_pull_up>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins =
+					<1 RK_PC6 1 &pcfg_pull_up>,
+					<1 RK_PC7 1 &pcfg_pull_up>,
+					<1 RK_PD0 1 &pcfg_pull_up>,
+					<1 RK_PD1 1 &pcfg_pull_up>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins =
+					<1 RK_PB1 2 &pcfg_pull_none_8ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins =
+					<1 RK_PB2 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_rstnout: emmc-rstnout {
+				rockchip,pins =
+					<1 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins =
+					<1 RK_PA0 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins =
+					<1 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA3 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins =
+					<1 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA3 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA4 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA5 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA6 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA7 2 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		flash {
+			flash_cs0: flash-cs0 {
+				rockchip,pins =
+					<1 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			flash_rdy: flash-rdy {
+				rockchip,pins =
+					<1 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			flash_dqs: flash-dqs {
+				rockchip,pins =
+					<1 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			flash_ale: flash-ale {
+				rockchip,pins =
+					<1 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			flash_cle: flash-cle {
+				rockchip,pins =
+					<1 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			flash_wrn: flash-wrn {
+				rockchip,pins =
+					<1 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			flash_csl: flash-csl {
+				rockchip,pins =
+					<1 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			flash_rdn: flash-rdn {
+				rockchip,pins =
+					<1 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			flash_bus8: flash-bus8 {
+				rockchip,pins =
+					<1 RK_PA0 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA1 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA2 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA3 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA4 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA5 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA6 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA7 1 &pcfg_pull_up_12ma>;
+			};
+		};
+
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<1 RK_PA0 3 &pcfg_pull_none>,
+					<1 RK_PA1 3 &pcfg_pull_none>,
+					<1 RK_PA2 3 &pcfg_pull_none>,
+					<1 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<1 RK_PA0 3 &pcfg_pull_none>,
+					<1 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<1 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<1 RK_PB1 3 &pcfg_pull_none>;
+			};
+		};
+
+		lcdc {
+			lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
+				rockchip,pins =
+					<3 RK_PA0 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin {
+				rockchip,pins =
+					<3 RK_PA1 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin {
+				rockchip,pins =
+					<3 RK_PA2 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin {
+				rockchip,pins =
+					<3 RK_PA3 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins {
+				rockchip,pins =
+					<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+					<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+					<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+					<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+					<3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+					<3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+					<3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+					<3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+					<3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+			};
+
+			lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins {
+				rockchip,pins =
+					<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+					<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+					<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+					<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+			};
+
+			lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins {
+				rockchip,pins =
+					<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+					<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+					<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+					<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+			};
+
+			lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins {
+				rockchip,pins =
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+					<3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+					<3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+					<3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+					<3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+					<3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+			};
+
+			lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins {
+				rockchip,pins =
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+			};
+
+			lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins {
+				rockchip,pins =
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins =
+					<0 RK_PB7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins =
+					<0 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins =
+					<2 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins =
+					<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm4 {
+			pwm4_pin: pwm4-pin {
+				rockchip,pins =
+					<3 RK_PC2 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm5 {
+			pwm5_pin: pwm5-pin {
+				rockchip,pins =
+					<3 RK_PC3 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm6 {
+			pwm6_pin: pwm6-pin {
+				rockchip,pins =
+					<3 RK_PC4 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm7 {
+			pwm7_pin: pwm7-pin {
+				rockchip,pins =
+					<3 RK_PC5 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					<2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */
+					<2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */
+					<2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */
+					<2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */
+					<2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */
+					<2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */
+					<2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */
+					<2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */
+					<2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */
+			};
+
+			mac_refclk_12ma: mac-refclk-12ma {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none_12ma>;
+			};
+
+			mac_refclk: mac-refclk {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none>;
+			};
+		};
+
+		cif-m0 {
+			cif_clkout_m0: cif-clkout-m0 {
+				rockchip,pins =
+					<2 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			dvp_d2d9_m0: dvp-d2d9-m0 {
+				rockchip,pins =
+					<2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */
+					<2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */
+					<2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */
+					<2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */
+					<2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */
+					<2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */
+					<2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */
+					<2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */
+					<2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */
+					<2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */
+					<2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */
+					<2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */
+			};
+
+			dvp_d0d1_m0: dvp-d0d1-m0 {
+				rockchip,pins =
+					<2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */
+					<2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */
+			};
+
+			dvp_d10d11_m0:d10-d11-m0 {
+				rockchip,pins =
+					<2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */
+					<2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */
+			};
+		};
+
+		cif-m1 {
+			cif_clkout_m1: cif-clkout-m1 {
+				rockchip,pins =
+					<3 RK_PD0 3 &pcfg_pull_none>;
+			};
+
+			dvp_d2d9_m1: dvp-d2d9-m1 {
+				rockchip,pins =
+					<3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */
+					<3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */
+					<3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */
+					<3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */
+					<3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */
+					<3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */
+					<3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */
+					<3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */
+					<3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */
+					<3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */
+					<3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */
+					<3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */
+			};
+
+			dvp_d0d1_m1: dvp-d0d1-m1 {
+				rockchip,pins =
+					<3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */
+					<3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */
+			};
+
+			dvp_d10d11_m1:d10-d11-m1 {
+				rockchip,pins =
+					<3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */
+					<3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */
+			};
+		};
+
+		isp {
+			isp_prelight: isp-prelight {
+				rockchip,pins =
+					<3 RK_PD1 4 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
new file mode 100644
index 0000000000..184b84fdde
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3308.dtsi"
+
+/ {
+	model = "Rockchip RK3308 EVB";
+	compatible = "rockchip,rk3308-evb", "rockchip,rk3308";
+
+	chosen {
+		stdout-path = "serial4:1500000n8";
+	};
+
+	adc-keys0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		button-func {
+			linux,code = <KEY_FN>;
+			label = "function";
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	adc-keys1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		button-esc {
+			linux,code = <KEY_MICMUTE>;
+			label = "micmute";
+			press-threshold-microvolt = <1130000>;
+		};
+
+		button-home {
+			linux,code = <KEY_MODE>;
+			label = "mode";
+			press-threshold-microvolt = <901000>;
+		};
+
+		button-menu {
+			linux,code = <KEY_PLAY>;
+			label = "play";
+			press-threshold-microvolt = <624000>;
+		};
+
+		button-down {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			press-threshold-microvolt = <300000>;
+		};
+
+		button-up {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vccio_sdio: vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_ddr: vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vccio_flash: vccio-flash {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_flash";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc5v0_host: vcc5v0-host {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_drv>;
+		regulator-name = "vbus_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_core: vdd-core {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <827000>;
+		regulator-max-microvolt = <1340000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_1v0: vdd-1v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v0";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_32k>;
+
+	buttons {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_drv: usb-drv {
+			rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
new file mode 100644
index 0000000000..9232357f4f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3308.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3308-CC board";
+	compatible = "firefly,roc-rk3308-cc", "rockchip,rk3308";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_recv_pin>;
+	};
+
+	ir_tx {
+		compatible = "pwm-ir-tx";
+		pwms = <&pwm5 0 25000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_led: led-0 {
+			label = "firefly:red:power";
+			linux,default-trigger = "ir-power-click";
+			default-state = "on";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		user_led: led-1 {
+			label = "firefly:blue:user";
+			linux,default-trigger = "ir-user-click";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	typec_vcc5v: typec-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "typec_vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&typec_vcc5v>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_sdmmc: vcc-sdmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sdmmc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_sd: vcc-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vdd_core: vdd-core {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <827000>;
+		regulator-max-microvolt = <1340000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&pwm5 {
+	status = "okay";
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm5_pin_pull_down>;
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_32k>;
+
+	ir-receiver {
+		ir_recv_pin: ir-recv-pin  {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&sdmmc {
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <300>;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_sdmmc>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
new file mode 100644
index 0000000000..e9810d2f04
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <akash@openedev.com>
+ * Copyright (c) 2019 Jagan Teki <jagan@openedev.com>
+ */
+
+/dts-v1/;
+#include "rk3308.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi S";
+	compatible = "radxa,rockpis", "rockchip,rk3308";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+
+		green-led {
+			default-state = "on";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+			label = "rockpis:green:power";
+			linux,default-trigger = "default-on";
+		};
+
+		blue-led {
+			default-state = "on";
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+			label = "rockpis:blue:user";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_core: vdd-core {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <827000>;
+		regulator-max-microvolt = <1340000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_io>;
+	snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_32k>;
+
+	leds {
+		green_led_gio: green-led-gpio {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		heartbeat_led_gpio: heartbeat-led-gpio {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake: wifi-host-wake {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <1000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
new file mode 100644
index 0000000000..2ae4bb7d5e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -0,0 +1,1883 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ */
+
+#include <dt-bindings/clock/rk3308-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3308";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000 950000 1340000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000 950000 1340000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1025000 1025000 1340000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1125000 1125000 1340000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	mac_clkin: external-mac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "mac_clkin";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	grf: grf@ff000000 {
+		compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff000000 0x0 0x08000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x500>;
+			mode-bootloader = <BOOT_BL_DOWNLOAD>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-fastboot = <BOOT_FASTBOOT>;
+		};
+	};
+
+	usb2phy_grf: syscon@ff008000 {
+		compatible = "rockchip,rk3308-usb2phy-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff008000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2phy@100 {
+			compatible = "rockchip,rk3308-usb2phy";
+			reg = <0x100 0x10>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			clocks = <&cru SCLK_USBPHY_REF>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy_otg: otg-port {
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			u2phy_host: host-port {
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	detect_grf: syscon@ff00b000 {
+		compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff00b000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	core_grf: syscon@ff00c000 {
+		compatible = "rockchip,rk3308-core-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff00c000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	i2c0: i2c@ff040000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff040000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff050000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff050000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff060000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff060000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff070000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff070000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3m0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@ff080000 {
+		compatible = "rockchip,rk3308-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff080000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff0a0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0a0000 0x0 0x100>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff0b0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0b0000 0x0 0x100>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff0c0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0c0000 0x0 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff0d0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0d0000 0x0 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff0e0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0e0000 0x0 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff120000 {
+		compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 0>, <&dmac0 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff130000 {
+		compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 2>, <&dmac0 3>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_miso &spi1_mosi>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff140000 {
+		compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac1 16>, <&dmac1 17>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_csn0 &spi2_miso &spi2_mosi>;
+		status = "disabled";
+	};
+
+	pwm8: pwm@ff160000 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm8_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm9: pwm@ff160010 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm9_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm10: pwm@ff160020 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm10_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm11: pwm@ff160030 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm11_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@ff170000 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm4_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@ff170010 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm5_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@ff170020 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm6_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@ff170030 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm7_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff180000 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff180010 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff180020 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff180030 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	rktimer: rktimer@ff1a0000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0x0 0xff1a0000 0x0 0x20>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	saradc: saradc@ff1e0000 {
+		compatible = "rockchip,rk3308-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xff1e0000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		#io-channel-cells = <1>;
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	dmac0: dma-controller@ff2c0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff2c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC0>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	dmac1: dma-controller@ff2d0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff2d0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC1>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	i2s_2ch_0: i2s@ff350000 {
+		compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff350000 0x0 0x1000>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1 8>, <&dmac1 9>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>;
+		reset-names = "reset-m", "reset-h";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_2ch_0_sclk
+			     &i2s_2ch_0_lrck
+			     &i2s_2ch_0_sdi
+			     &i2s_2ch_0_sdo>;
+		status = "disabled";
+	};
+
+	i2s_2ch_1: i2s@ff360000 {
+		compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff360000 0x0 0x1000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1 11>;
+		dma-names = "rx";
+		resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>;
+		reset-names = "reset-m", "reset-h";
+		status = "disabled";
+	};
+
+	spdif_tx: spdif-tx@ff3a0000 {
+		compatible = "rockchip,rk3308-spdif", "rockchip,rk3066-spdif";
+		reg = <0x0 0xff3a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac1 13>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_out>;
+		status = "disabled";
+	};
+
+	usb20_otg: usb@ff400000 {
+		compatible = "rockchip,rk3308-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff400000 0x0 0x40000>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@ff440000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff440000 0x0 0x10000>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@ff450000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@ff480000 {
+		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff480000 0x0 0x4000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <4>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+		status = "disabled";
+	};
+
+	emmc: mmc@ff490000 {
+		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff490000 0x0 0x4000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <8>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ff4a0000 {
+		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff4a0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <4>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
+		status = "disabled";
+	};
+
+	nfc: nand-controller@ff4b0000 {
+		compatible = "rockchip,rk3308-nfc",
+			     "rockchip,rv1108-nfc";
+		reg = <0x0 0xff4b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+		clock-names = "ahb", "nfc";
+		assigned-clocks = <&cru SCLK_NANDC>;
+		assigned-clock-rates = <150000000>;
+		pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
+			     &flash_rdn &flash_rdy &flash_wrn>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff4e0000 {
+		compatible = "rockchip,rk3308-gmac";
+		reg = <0x0 0xff4e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>,
+			 <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>,
+			 <&cru SCLK_MAC>, <&cru ACLK_MAC>,
+			 <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac", "clk_mac_speed";
+		phy-mode = "rmii";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
+		resets = <&cru SRST_MAC_A>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	sfc: spi@ff4c0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xff4c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	cru: clock-controller@ff500000 {
+		compatible = "rockchip,rk3308-cru";
+		reg = <0x0 0xff500000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru SCLK_RTC32K>;
+		assigned-clock-rates = <32768>;
+	};
+
+	gic: interrupt-controller@ff580000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xff581000 0x0 0x1000>,
+		      <0x0 0xff582000 0x0 0x2000>,
+		      <0x0 0xff584000 0x0 0x2000>,
+		      <0x0 0xff586000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		#address-cells = <0>;
+	};
+
+	sram: sram@fff80000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0xfff80000 0x0 0x40000>;
+		ranges = <0 0x0 0xfff80000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* reserved for ddr dvfs and system suspend/resume */
+		ddr-sram@0 {
+			reg = <0x0 0x8000>;
+		};
+
+		/* reserved for vad audio buffer */
+		vad_sram: vad-sram@8000 {
+			reg = <0x8000 0x38000>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3308-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff220000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff220000 0x0 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff230000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff230000 0x0 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff240000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff240000 0x0 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff250000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff250000 0x0 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@ff260000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff260000 0x0 0x100>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+			bias-disable;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+			bias-pull-up;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_smt: pcfg-pull-none-smt {
+			bias-disable;
+			input-schmitt-enable;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		pcfg_input: pcfg-input {
+			input-enable;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins =
+					<3 RK_PB1 2 &pcfg_pull_none_8ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins =
+					<3 RK_PB0 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_pwren: emmc-pwren {
+				rockchip,pins =
+					<3 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			emmc_rstn: emmc-rstn {
+				rockchip,pins =
+					<3 RK_PB2 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA3 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA3 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA4 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA5 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA6 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA7 2 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		flash {
+			flash_csn0: flash-csn0 {
+				rockchip,pins =
+					<3 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			flash_rdy: flash-rdy {
+				rockchip,pins =
+					<3 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			flash_ale: flash-ale {
+				rockchip,pins =
+					<3 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			flash_cle: flash-cle {
+				rockchip,pins =
+					<3 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			flash_wrn: flash-wrn {
+				rockchip,pins =
+					<3 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			flash_rdn: flash-rdn {
+				rockchip,pins =
+					<3 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			flash_bus8: flash-bus8 {
+				rockchip,pins =
+					<3 RK_PA0 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA1 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA2 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA3 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA4 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA5 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA6 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA7 1 &pcfg_pull_up_12ma>;
+			};
+		};
+
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<3 RK_PA0 3 &pcfg_pull_none>,
+					<3 RK_PA1 3 &pcfg_pull_none>,
+					<3 RK_PA2 3 &pcfg_pull_none>,
+					<3 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<3 RK_PA0 3 &pcfg_pull_none>,
+					<3 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<3 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<3 RK_PA5 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					/* mac_txen */
+					<1 RK_PC1 3 &pcfg_pull_none_12ma>,
+					/* mac_txd1 */
+					<1 RK_PC3 3 &pcfg_pull_none_12ma>,
+					/* mac_txd0 */
+					<1 RK_PC2 3 &pcfg_pull_none_12ma>,
+					/* mac_rxd0 */
+					<1 RK_PC4 3 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<1 RK_PC5 3 &pcfg_pull_none>,
+					/* mac_rxer */
+					<1 RK_PB7 3 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<1 RK_PC0 3 &pcfg_pull_none>,
+					/* mac_mdio */
+					<1 RK_PB6 3 &pcfg_pull_none>,
+					/* mac_mdc */
+					<1 RK_PB5 3 &pcfg_pull_none>;
+			};
+
+			mac_refclk_12ma: mac-refclk-12ma {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_none_12ma>;
+			};
+
+			mac_refclk: mac-refclk {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac-m1 {
+			rmiim1_pins: rmiim1-pins {
+				rockchip,pins =
+					/* mac_txen */
+					<4 RK_PB7 2 &pcfg_pull_none_12ma>,
+					/* mac_txd1 */
+					<4 RK_PA5 2 &pcfg_pull_none_12ma>,
+					/* mac_txd0 */
+					<4 RK_PA4 2 &pcfg_pull_none_12ma>,
+					/* mac_rxd0 */
+					<4 RK_PA2 2 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<4 RK_PA3 2 &pcfg_pull_none>,
+					/* mac_rxer */
+					<4 RK_PA0 2 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<4 RK_PA1 2 &pcfg_pull_none>,
+					/* mac_mdio */
+					<4 RK_PB6 2 &pcfg_pull_none>,
+					/* mac_mdc */
+					<4 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			macm1_refclk_12ma: macm1-refclk-12ma {
+				rockchip,pins =
+					<4 RK_PB4 2 &pcfg_pull_none_12ma>;
+			};
+
+			macm1_refclk: macm1-refclk {
+				rockchip,pins =
+					<4 RK_PB4 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins =
+					<1 RK_PD0 2 &pcfg_pull_none_smt>,
+					<1 RK_PD1 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins =
+					<0 RK_PB3 1 &pcfg_pull_none_smt>,
+					<0 RK_PB4 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins =
+					<2 RK_PA2 3 &pcfg_pull_none_smt>,
+					<2 RK_PA3 3 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3-m0 {
+			i2c3m0_xfer: i2c3m0-xfer {
+				rockchip,pins =
+					<0 RK_PB7 2 &pcfg_pull_none_smt>,
+					<0 RK_PC0 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3-m1 {
+			i2c3m1_xfer: i2c3m1-xfer {
+				rockchip,pins =
+					<3 RK_PB4 2 &pcfg_pull_none_smt>,
+					<3 RK_PB5 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3-m2 {
+			i2c3m2_xfer: i2c3m2-xfer {
+				rockchip,pins =
+					<2 RK_PA1 3 &pcfg_pull_none_smt>,
+					<2 RK_PA0 3 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2s_2ch_0 {
+			i2s_2ch_0_mclk: i2s-2ch-0-mclk {
+				rockchip,pins =
+					<4 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_sclk: i2s-2ch-0-sclk {
+				rockchip,pins =
+					<4 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_lrck: i2s-2ch-0-lrck {
+				rockchip,pins =
+					<4 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_sdo: i2s-2ch-0-sdo {
+				rockchip,pins =
+					<4 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_sdi: i2s-2ch-0-sdi {
+				rockchip,pins =
+					<4 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s_8ch_0 {
+			i2s_8ch_0_mclk: i2s-8ch-0-mclk {
+				rockchip,pins =
+					<2 RK_PA4 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sclktx: i2s-8ch-0-sclktx {
+				rockchip,pins =
+					<2 RK_PA5 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sclkrx: i2s-8ch-0-sclkrx {
+				rockchip,pins =
+					<2 RK_PA6 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_lrcktx: i2s-8ch-0-lrcktx {
+				rockchip,pins =
+					<2 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_lrckrx: i2s-8ch-0-lrckrx {
+				rockchip,pins =
+					<2 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo0: i2s-8ch-0-sdo0 {
+				rockchip,pins =
+					<2 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo1: i2s-8ch-0-sdo1 {
+				rockchip,pins =
+					<2 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo2: i2s-8ch-0-sdo2 {
+				rockchip,pins =
+					<2 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo3: i2s-8ch-0-sdo3 {
+				rockchip,pins =
+					<2 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi0: i2s-8ch-0-sdi0 {
+				rockchip,pins =
+					<2 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi1: i2s-8ch-0-sdi1 {
+				rockchip,pins =
+					<2 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi2: i2s-8ch-0-sdi2 {
+				rockchip,pins =
+					<2 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi3: i2s-8ch-0-sdi3 {
+				rockchip,pins =
+					<2 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s_8ch_1_m0 {
+			i2s_8ch_1_m0_mclk: i2s-8ch-1-m0-mclk {
+				rockchip,pins =
+					<1 RK_PA2 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sclktx: i2s-8ch-1-m0-sclktx {
+				rockchip,pins =
+					<1 RK_PA3 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sclkrx: i2s-8ch-1-m0-sclkrx {
+				rockchip,pins =
+					<1 RK_PA4 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_lrcktx: i2s-8ch-1-m0-lrcktx {
+				rockchip,pins =
+					<1 RK_PA5 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_lrckrx: i2s-8ch-1-m0-lrckrx {
+				rockchip,pins =
+					<1 RK_PA6 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo0: i2s-8ch-1-m0-sdo0 {
+				rockchip,pins =
+					<1 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo1_sdi3: i2s-8ch-1-m0-sdo1-sdi3 {
+				rockchip,pins =
+					<1 RK_PB0 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo2_sdi2: i2s-8ch-1-m0-sdo2-sdi2 {
+				rockchip,pins =
+					<1 RK_PB1 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo3_sdi1: i2s-8ch-1-m0-sdo3_sdi1 {
+				rockchip,pins =
+					<1 RK_PB2 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdi0: i2s-8ch-1-m0-sdi0 {
+				rockchip,pins =
+					<1 RK_PB3 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2s_8ch_1_m1 {
+			i2s_8ch_1_m1_mclk: i2s-8ch-1-m1-mclk {
+				rockchip,pins =
+					<1 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sclktx: i2s-8ch-1-m1-sclktx {
+				rockchip,pins =
+					<1 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sclkrx: i2s-8ch-1-m1-sclkrx {
+				rockchip,pins =
+					<1 RK_PB6 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_lrcktx: i2s-8ch-1-m1-lrcktx {
+				rockchip,pins =
+					<1 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_lrckrx: i2s-8ch-1-m1-lrckrx {
+				rockchip,pins =
+					<1 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo0: i2s-8ch-1-m1-sdo0 {
+				rockchip,pins =
+					<1 RK_PC1 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo1_sdi3: i2s-8ch-1-m1-sdo1-sdi3 {
+				rockchip,pins =
+					<1 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo2_sdi2: i2s-8ch-1-m1-sdo2-sdi2 {
+				rockchip,pins =
+					<1 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo3_sdi1: i2s-8ch-1-m1-sdo3_sdi1 {
+				rockchip,pins =
+					<1 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdi0: i2s-8ch-1-m1-sdi0 {
+				rockchip,pins =
+					<1 RK_PC5 2 &pcfg_pull_none>;
+			};
+		};
+
+		pdm_m0 {
+			pdm_m0_clk: pdm-m0-clk {
+				rockchip,pins =
+					<1 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi0: pdm-m0-sdi0 {
+				rockchip,pins =
+					<1 RK_PB3 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi1: pdm-m0-sdi1 {
+				rockchip,pins =
+					<1 RK_PB2 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi2: pdm-m0-sdi2 {
+				rockchip,pins =
+					<1 RK_PB1 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi3: pdm-m0-sdi3 {
+				rockchip,pins =
+					<1 RK_PB0 3 &pcfg_pull_none>;
+			};
+		};
+
+		pdm_m1 {
+			pdm_m1_clk: pdm-m1-clk {
+				rockchip,pins =
+					<1 RK_PB6 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi0: pdm-m1-sdi0 {
+				rockchip,pins =
+					<1 RK_PC5 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi1: pdm-m1-sdi1 {
+				rockchip,pins =
+					<1 RK_PC4 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi2: pdm-m1-sdi2 {
+				rockchip,pins =
+					<1 RK_PC3 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi3: pdm-m1-sdi3 {
+				rockchip,pins =
+					<1 RK_PC2 4 &pcfg_pull_none>;
+			};
+		};
+
+		pdm_m2 {
+			pdm_m2_clkm: pdm-m2-clkm {
+				rockchip,pins =
+					<2 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			pdm_m2_clk: pdm-m2-clk {
+				rockchip,pins =
+					<2 RK_PA6 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi0: pdm-m2-sdi0 {
+				rockchip,pins =
+					<2 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi1: pdm-m2-sdi1 {
+				rockchip,pins =
+					<2 RK_PB6 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi2: pdm-m2-sdi2 {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi3: pdm-m2-sdi3 {
+				rockchip,pins =
+					<2 RK_PC0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins =
+					<0 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			pwm0_pin_pull_down: pwm0-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PB5 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins =
+					<0 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			pwm1_pin_pull_down: pwm1-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PB6 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins =
+					<0 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			pwm2_pin_pull_down: pwm2-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PB7 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins =
+					<0 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			pwm3_pin_pull_down: pwm3-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PC0 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm4 {
+			pwm4_pin: pwm4-pin {
+				rockchip,pins =
+					<0 RK_PA1 2 &pcfg_pull_none>;
+			};
+
+			pwm4_pin_pull_down: pwm4-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PA1 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm5 {
+			pwm5_pin: pwm5-pin {
+				rockchip,pins =
+					<0 RK_PC1 2 &pcfg_pull_none>;
+			};
+
+			pwm5_pin_pull_down: pwm5-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PC1 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm6 {
+			pwm6_pin: pwm6-pin {
+				rockchip,pins =
+					<0 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			pwm6_pin_pull_down: pwm6-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PC2 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm7 {
+			pwm7_pin: pwm7-pin {
+				rockchip,pins =
+					<2 RK_PB0 2 &pcfg_pull_none>;
+			};
+
+			pwm7_pin_pull_down: pwm7-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB0 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm8 {
+			pwm8_pin: pwm8-pin {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none>;
+			};
+
+			pwm8_pin_pull_down: pwm8-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm9 {
+			pwm9_pin: pwm9-pin {
+				rockchip,pins =
+					<2 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			pwm9_pin_pull_down: pwm9-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB3 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm10 {
+			pwm10_pin: pwm10-pin {
+				rockchip,pins =
+					<2 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			pwm10_pin_pull_down: pwm10-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB4 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm11 {
+			pwm11_pin: pwm11-pin {
+				rockchip,pins =
+					<2 RK_PC0 4 &pcfg_pull_none>;
+			};
+
+			pwm11_pin_pull_down: pwm11-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PC0 4 &pcfg_pull_down>;
+			};
+		};
+
+		rtc {
+			rtc_32k: rtc-32k {
+				rockchip,pins =
+					<0 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins =
+					<4 RK_PD5 1 &pcfg_pull_none_4ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins =
+					<4 RK_PD4 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_det: sdmmc-det {
+				rockchip,pins =
+					<0 RK_PA3 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_pwren: sdmmc-pwren {
+				rockchip,pins =
+					<4 RK_PD6 1 &pcfg_pull_none_4ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins =
+					<4 RK_PD0 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins =
+					<4 RK_PD0 1 &pcfg_pull_up_4ma>,
+					<4 RK_PD1 1 &pcfg_pull_up_4ma>,
+					<4 RK_PD2 1 &pcfg_pull_up_4ma>,
+					<4 RK_PD3 1 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins =
+					<4 RK_PA5 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins =
+					<4 RK_PA4 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdio_pwren: sdio-pwren {
+				rockchip,pins =
+					<0 RK_PA2 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_wrpt: sdio-wrpt {
+				rockchip,pins =
+					<0 RK_PA1 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_intn: sdio-intn {
+				rockchip,pins =
+					<0 RK_PA0 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_bus1: sdio-bus1 {
+				rockchip,pins =
+					<4 RK_PA0 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins =
+					<4 RK_PA0 1 &pcfg_pull_up_8ma>,
+					<4 RK_PA1 1 &pcfg_pull_up_8ma>,
+					<4 RK_PA2 1 &pcfg_pull_up_8ma>,
+					<4 RK_PA3 1 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		spdif_in {
+			spdif_in: spdif-in {
+				rockchip,pins =
+					<0 RK_PC2 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif_out {
+			spdif_out: spdif-out {
+				rockchip,pins =
+					<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins =
+					<2 RK_PA2 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_csn0: spi0-csn0 {
+				rockchip,pins =
+					<2 RK_PA3 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_miso: spi0-miso {
+				rockchip,pins =
+					<2 RK_PA0 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_mosi: spi0-mosi {
+				rockchip,pins =
+					<2 RK_PA1 2 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins =
+					<3 RK_PB3 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_csn0: spi1-csn0 {
+				rockchip,pins =
+					<3 RK_PB5 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_miso: spi1-miso {
+				rockchip,pins =
+					<3 RK_PB2 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_mosi: spi1-mosi {
+				rockchip,pins =
+					<3 RK_PB4 3 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		spi1-m1 {
+			spi1m1_miso: spi1m1-miso {
+				rockchip,pins =
+					<2 RK_PA4 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_mosi: spi1m1-mosi {
+				rockchip,pins =
+					<2 RK_PA5 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_clk: spi1m1-clk {
+				rockchip,pins =
+					<2 RK_PA7 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_csn0: spi1m1-csn0 {
+				rockchip,pins =
+					<2 RK_PB1 2 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		spi2 {
+			spi2_clk: spi2-clk {
+				rockchip,pins =
+					<1 RK_PD0 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_csn0: spi2-csn0 {
+				rockchip,pins =
+					<1 RK_PD1 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_miso: spi2-miso {
+				rockchip,pins =
+					<1 RK_PC6 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_mosi: spi2-mosi {
+				rockchip,pins =
+					<1 RK_PC7 3 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		tsadc {
+			tsadc_otp_pin: tsadc-otp-pin {
+				rockchip,pins =
+					<0 RK_PB2 0 &pcfg_pull_none>;
+			};
+
+			tsadc_otp_out: tsadc-otp-out {
+				rockchip,pins =
+					<0 RK_PB2 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins =
+					<2 RK_PA1 1 &pcfg_pull_up>,
+					<2 RK_PA0 1 &pcfg_pull_up>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins =
+					<2 RK_PA2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins =
+					<2 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_pin: uart0-rts-pin {
+				rockchip,pins =
+					<2 RK_PA3 0 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins =
+					<1 RK_PD1 1 &pcfg_pull_up>,
+					<1 RK_PD0 1 &pcfg_pull_up>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins =
+					<1 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins =
+					<1 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2-m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins =
+					<1 RK_PC7 2 &pcfg_pull_up>,
+					<1 RK_PC6 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart2-m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins =
+					<4 RK_PD3 2 &pcfg_pull_up>,
+					<4 RK_PD2 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins =
+					<3 RK_PB5 4 &pcfg_pull_up>,
+					<3 RK_PB4 4 &pcfg_pull_up>;
+			};
+		};
+
+		uart3-m1 {
+			uart3m1_xfer: uart3m1-xfer {
+				rockchip,pins =
+					<0 RK_PC2 3 &pcfg_pull_up>,
+					<0 RK_PC1 3 &pcfg_pull_up>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins =
+					<4 RK_PB1 1 &pcfg_pull_up>,
+					<4 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins =
+					<4 RK_PA6 1 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins =
+					<4 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			uart4_rts_pin: uart4-rts-pin {
+				rockchip,pins =
+					<4 RK_PA7 0 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
new file mode 100644
index 0000000000..1deef53a4c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3328.dtsi"
+
+/ {
+	model = "A95X Z2";
+	compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdio;
+		mmc2 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&cyx_led_pin>;
+		pinctrl-names = "default";
+
+		cyx_led: led-0 {
+			default-state = "on";
+			gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "CYX_LED";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+
+	spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	/* Power tree */
+	vccio_1v8: vccio-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vccio_3v3: vccio-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_otg_vbus: otg-vbus-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&otg_vbus_drv>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vccio_3v3>;
+	};
+
+	vdd_arm: vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&analog_sound {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu0_opp_table {
+	opp-1200000000 {
+		status = "disabled";
+	};
+
+	opp-1296000000 {
+		status = "disabled";
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gmac2phy {
+	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+	assigned-clock-rate = <50000000>;
+	assigned-clocks = <&cru SCLK_MAC2PHY>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	pmuio-supply = <&vccio_3v3>;
+	vccio1-supply = <&vccio_3v3>;
+	vccio2-supply = <&vccio_1v8>;
+	vccio3-supply = <&vccio_3v3>;
+	vccio4-supply = <&vccio_1v8>;
+	vccio5-supply = <&vccio_3v3>;
+	vccio6-supply = <&vccio_3v3>;
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		cyx_led_pin: cyx-led-pin {
+			rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		pwm0_pin_pull_up: pwm0-pin-pull-up {
+			rockchip,pins = <2 RK_PA4 1 &pcfg_pull_up>;
+		};
+	};
+
+	pwm1 {
+		pwm1_pin_pull_up: pwm1-pin-pull-up {
+			rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc1 {
+		clk_32k_out: clk-32k-out {
+			rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pin_pull_up>;
+	pinctrl-names = "active";
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1_pin_pull_up>;
+	pinctrl-names = "active";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vccio_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <125000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &clk_32k_out>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdifm0_tx>;
+	status = "okay";
+};
+
+&soc_crit {
+	temperature = <115000>; /* millicelsius */
+};
+
+&target {
+	temperature = <105000>; /* millicelsius */
+};
+
+&threshold {
+	temperature = <90000>; /* millicelsius */
+};
+
+&tsadc {
+	rockchip,hw-tshut-temp = <120000>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	phy-supply = <&vcc_otg_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
new file mode 100644
index 0000000000..ce318e05f0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "Anbernic RG351M";
+	compatible = "anbernic,rg351m", "rockchip,rk3326";
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+/delete-node/ &builtin_gamepad;
+/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
+
+&internal_display {
+	compatible = "elida,kd35t133";
+	iovcc-supply = <&vcc_lcd>;
+	vdd-supply = <&vcc_lcd>;
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+/delete-node/ &rk817_charger;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
new file mode 100644
index 0000000000..80fc53c807
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	builtin_gamepad: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		button-sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		button-sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		button-sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		button-sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		button-sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		button-sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		button-sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		button-sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		btn_f1: button-sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		btn_f2: button-sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		btn_f3: button-sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		btn_f4: button-sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		btn_f5: button-sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		btn_f6: button-sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		button-sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		button-sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	/* led-1 is wired directly to output of always-on regulator */
+
+	gpio_led: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&red_led_pin>;
+
+		red_led: led-3 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	pwm_led: led-controller {
+		compatible = "pwm-leds";
+
+		blue_led: led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <255>;
+			pwms = <&pwm3 0 25000 0>;
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&usb_midu>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			LDO_REG9 {
+				/* unused */
+			};
+
+			usb_midu: BOOST {
+				regulator-name = "usb_midu";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		rk817_charger: charger {
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		red_led_pin: red-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
new file mode 100644
index 0000000000..d94ac81eb4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Advance Black Edition";
+	compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326";
+
+	aliases {
+		mmc1 = &sdio;
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <172 772>;
+			linux,code = <ABS_X>;
+			};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <278 815>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pins>;
+		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&builtin_gamepad {
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&internal_display {
+	compatible = "elida,kd35t133";
+	iovcc-supply = <&vcc_lcd>;
+	vdd-supply = <&vcc_lcd>;
+};
+
+&rk817 {
+	regulators {
+		vcc_wifi: LDO_REG9 {
+			regulator-name = "vcc_wifi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	esp8089: wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_pwrseq_pins: wifi-pwrseq-pins {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
new file mode 100644
index 0000000000..aa6f5b1220
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Advance";
+	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <172 772>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <278 815>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+};
+
+&internal_display {
+	compatible = "elida,kd35t133";
+	iovcc-supply = <&vcc_lcd>;
+	vdd-supply = <&vcc_lcd>;
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
new file mode 100644
index 0000000000..35bbaf559c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Super";
+	compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
+
+	joystick_mux_controller: mux-controller {
+		compatible = "gpio-mux";
+		pinctrl = <&mux_en_pins>;
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
+			    <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+
+	joystick_mux: adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&saradc 1>;
+		io-channel-names = "parent";
+		#io-channel-cells = <1>;
+
+		mux-controls = <&joystick_mux_controller>;
+		channels = "0", "1", "2", "3";
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&joystick_mux 0>,
+			      <&joystick_mux 1>,
+			      <&joystick_mux 2>,
+			      <&joystick_mux 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volume-up {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+/* f1 and f2 conflict with volume buttons */
+/delete-node/ &btn_f1;
+/delete-node/ &btn_f2;
+
+&builtin_gamepad {
+	button-sw19 {
+		gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+		label = "SELECT";
+		linux,code = <BTN_SELECT>;
+	};
+	/* note that TR2 and TL2 are swapped */
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw22 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "START";
+		linux,code = <BTN_START>;
+	};
+};
+
+&internal_display {
+	compatible = "elida,kd50t048a", "sitronix,st7701";
+	reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	IOVCC-supply = <&vcc_lcd>;
+	VCC-supply = <&vcc_lcd>;
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joystick {
+		mux_en_pins: mux-pins {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326.dtsi b/arch/arm64/boot/dts/rockchip/rk3326.dtsi
new file mode 100644
index 0000000000..2ba6da1251
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include "px30.dtsi"
+
+&display_subsystem {
+	ports = <&vopb_out>;
+};
+
+/delete-node/ &dsi_in_vopl;
+/delete-node/ &lvds_vopl_in;
+/delete-node/ &vopl;
+/delete-node/ &vopl_mmu;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
new file mode 100644
index 0000000000..40bf808642
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (c) 2017-2019 Arm Ltd.
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Beelink A1";
+	compatible = "azw,beelink-a1", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	/*
+	 * UART pins, as viewed with bottom of case removed:
+	 *
+	 *           Front
+	 *        /-------
+	 *  L    / o <- Gnd
+	 *  e   / o <-- Rx
+	 *  f  / o <--- Tx
+	 *  t / o <---- +3.3v
+	 *    |
+	 */
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	vcc_host_5v: usb3-current-switch {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb30_host_drv>;
+		regulator-name = "vcc_host_5v";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-beelink-gs1";
+	};
+};
+
+&analog_sound {
+	simple-audio-card,name = "Analog A/V";
+	status = "okay";
+};
+
+&codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211f>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,aal;
+	snps,pbl = <0x4>;
+	tx_delay = <0x26>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211f: ethernet-phy@0 {
+			reg = <0>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <1000000>;
+	i2c-scl-falling-time-ns = <5>;
+	i2c-scl-rising-time-ns = <83>;
+	status = "okay";
+
+	pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <0>;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_18: LDO_REG1 {
+				regulator-name = "vdd_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc_18emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_11: LDO_REG3 {
+				regulator-name = "vdd_11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1100000>;
+				};
+			};
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vdd_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vdd_18>;
+	pmuio-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb3 {
+		usb30_host_drv: usb30-host-drv {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		bt_dis: bt-dis {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		chip_en: chip-en {
+			rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		wl_dis: wl-dis {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		wl_wake_host: wl-wake-host {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_dis &bt_wake_host &chip_en &host_wake_bt &wl_dis &wl_wake_host>;
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
new file mode 100644
index 0000000000..ff6b466e0e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Rockchip RK3328 EVB";
+	compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdio;
+		mmc2 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac2phy {
+	phy-supply = <&vcc_phy>;
+	clock_in_out = "output";
+	assigned-clock-rate = <50000000>;
+	assigned-clocks = <&cru SCLK_MAC2PHY>;
+	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+		rockchip,pins =
+			<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
new file mode 100644
index 0000000000..16a1958e45
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3328-nanopi-r2c.dts"
+
+/ {
+	model = "FriendlyElec NanoPi R2C Plus";
+	compatible = "friendlyarm,nanopi-r2c-plus", "rockchip,rk3328";
+
+	aliases {
+		mmc1 = &emmc;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <150000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io_33>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
new file mode 100644
index 0000000000..a07a26b944
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3328-nanopi-r2s.dts"
+
+/ {
+	model = "FriendlyElec NanoPi R2C";
+	compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328";
+};
+
+&gmac2io {
+	phy-handle = <&yt8521s>;
+	tx_delay = <0x22>;
+	rx_delay = <0x12>;
+
+	mdio {
+		/delete-node/ ethernet-phy@1;
+
+		yt8521s: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+
+			motorcomm,clk-out-frequency-hz = <125000000>;
+			motorcomm,keep-pll-enabled;
+			motorcomm,auto-sleep-disabled;
+
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
new file mode 100644
index 0000000000..1445b879ac
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3328.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R2S";
+	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+
+	aliases {
+		ethernet1 = &rtl8153;
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clk: gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&reset_button_pin>;
+		pinctrl-names = "default";
+
+		key-reset {
+			label = "reset";
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&lan_led_pin>,  <&sys_led_pin>, <&wan_led_pin>;
+		pinctrl-names = "default";
+
+		lan_led: led-0 {
+			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:green:lan";
+		};
+
+		sys_led: led-1 {
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:red:sys";
+			default-state = "on";
+		};
+
+		wan_led: led-2 {
+			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:green:wan";
+		};
+	};
+
+	vcc_io_sdio: sdmmcio-regulator {
+		compatible = "regulator-gpio";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sdio_vcc_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_io_sdio";
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-settling-time-us = <5000>;
+		regulator-type = "voltage";
+		startup-delay-us = <2000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		vin-supply = <&vcc_io_33>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io_33>;
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_5v_lan: vdd-5v-lan {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&lan_vdd_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vdd_5v_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "disabled";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io_33>;
+	pinctrl-0 = <&rgmiim1_pins>;
+	pinctrl-names = "default";
+	rx_delay = <0x18>;
+	snps,aal;
+	tx_delay = <0x24>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-names = "default";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vdd_5v>;
+		vcc2-supply = <&vdd_5v>;
+		vcc3-supply = <&vdd_5v>;
+		vcc4-supply = <&vdd_5v>;
+		vcc5-supply = <&vcc_io_33>;
+		vcc6-supply = <&vdd_5v>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io_33: DCDC_REG4 {
+				regulator-name = "vcc_io_33";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	pmuio-supply = <&vcc_io_33>;
+	vccio1-supply = <&vcc_io_33>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io_sdio>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io_33>;
+	vccio6-supply = <&vcc_io_33>;
+	status = "okay";
+};
+
+&pinctrl {
+	button {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac2io {
+		eth_phy_reset_pin: eth-phy-reset-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lan {
+		lan_vdd_pin: lan-vdd-pin {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sd {
+		sdio_vcc_pin: sdio-vcc-pin {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	pinctrl-names = "default";
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_io_sdio>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Second port is for USB 3.0 */
+	rtl8153: device@2 {
+		compatible = "usbbda,8153";
+		reg = <2>;
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
new file mode 100644
index 0000000000..4237f2ee8f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Xunlong Software. Co., Ltd.
+ * (http://www.orangepi.org)
+ *
+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3328-orangepi-r1-plus.dts"
+
+/ {
+	model = "Xunlong Orange Pi R1 Plus LTS";
+	compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
+};
+
+&gmac2io {
+	phy-handle = <&yt8531c>;
+	tx_delay = <0x19>;
+	rx_delay = <0x05>;
+
+	mdio {
+		/delete-node/ ethernet-phy@1;
+
+		yt8531c: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+
+			motorcomm,auto-sleep-disabled;
+			motorcomm,clk-out-frequency-hz = <125000000>;
+			motorcomm,keep-pll-enabled;
+			motorcomm,rx-clk-drv-microamp = <5020>;
+			motorcomm,rx-data-drv-microamp = <5020>;
+
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <15000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
new file mode 100644
index 0000000000..dc83d74045
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Based on rk3328-nanopi-r2s.dts, which is:
+ *   Copyright (c) 2020 David Bauer <mail@david-bauer.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3328.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi R1 Plus";
+	compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
+
+	aliases {
+		ethernet1 = &rtl8153;
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clk: gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_5v_lan: vdd-5v-lan-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&lan_vdd_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vdd_5v_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "disabled";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io>;
+	pinctrl-0 = <&rgmiim1_pins>;
+	pinctrl-names = "default";
+	snps,aal;
+	rx_delay = <0x18>;
+	tx_delay = <0x24>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-names = "default";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	pmuio-supply = <&vcc_io>;
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_io>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac2io {
+		eth_phy_reset_pin: eth-phy-reset-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lan {
+		lan_vdd_pin: lan-vdd-pin {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Second port is for USB 3.0 */
+	rtl8153: device@2 {
+		compatible = "usbbda,8153";
+		reg = <2>;
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
new file mode 100644
index 0000000000..5d5d957408
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Firefly roc-rk3328-cc";
+	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		regulator-boot-on;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sdio: sdmmcio-regulator {
+		compatible = "regulator-gpio";
+		gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "vcc_sdio";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_led: led-0 {
+			label = "firefly:blue:power";
+			linux,default-trigger = "heartbeat";
+			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led: led-1 {
+			label = "firefly:yellow:user";
+			linux,default-trigger = "mmc1";
+			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&analog_sound {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <150000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,aal;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	snps,rxpbl = <0x4>;
+	snps,txpbl = <0x4>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_sdio>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
new file mode 100644
index 0000000000..e3e3984d01
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2021 T-Chip Intelligent Technology Co., Ltd
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "rk3328-roc-cc.dts"
+
+/ {
+	model = "Firefly ROC-RK3328-PC";
+	compatible = "firefly,roc-rk3328-pc", "rockchip,rk3328";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1750000>;
+
+		/* This button is unpopulated out of the factory. */
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-khadas";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en>, <&wifi_host_wake>;
+		reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmcio {
+		sdio_per_pin: sdio-per-pin {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wifi {
+		wifi_en: wifi-en {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake: wifi-host-wake {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_4ma>;
+		};
+
+		bt_rst: bt-rst {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_en: bt-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmic_int_l {
+	rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&rk805 {
+	interrupt-parent = <&gpio0>;
+	interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&usb20_host_drv {
+	rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&vcc_host1_5v {
+	gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc_sdio {
+	gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_per_pin>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
new file mode 100644
index 0000000000..018a3a5075
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2020 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on ./rk3328-rock64.dts, which is
+ *
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3328.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi E";
+	compatible = "radxa,rockpi-e", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1750000>;
+
+		/* This button is unpopulated out of the factory. */
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pin>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		regulator-name = "vcc_sd";
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host_5v: vcc-host-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb30_host_drv>;
+		enable-active-high;
+		regulator-name = "vcc_host_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_wifi: vcc-wifi-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en>;
+		regulator-name = "vcc_wifi";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&analog_sound {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,aal;
+	snps,rxpbl = <0x4>;
+	snps,txpbl = <0x4>;
+	tx_delay = <0x26>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			pinctrl-0 = <&eth_phy_int_pin>, <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			interrupt-parent = <&gpio1>;
+			interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac2phy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	pmuio-supply = <&vcc_io>;
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_io>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&pinctrl {
+	ephy {
+		eth_phy_int_pin: eth-phy-int-pin {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		eth_phy_reset_pin: eth-phy-reset-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		led_pin: led-pin {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb3 {
+		usb30_host_drv: usb30-host-drv {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_en: wifi-en {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
new file mode 100644
index 0000000000..0a27fa5271
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Pine64 Rock64";
+	compatible = "pine64,rock64", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	/* Common enable line for all of the rails mentioned in the labels */
+	vcc_host_5v: vcc_host1_5v: vcc_otg_5v: vcc-host-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_led: led-0 {
+			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		standby_led: led-1 {
+			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&analog_sound {
+	status = "okay";
+};
+
+&codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdifm0_tx>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		/* maximum speed for Rockchip SPI */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
new file mode 100644
index 0000000000..cc8209795c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -0,0 +1,1938 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3328-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3328-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3328";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		ethernet0 = &gmac2io;
+		ethernet1 = &gmac2phy;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	analog_sound: analog-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "Analog";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,name = "HDMI";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	i2s0: i2s@ff000000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff000000 0x0 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 11>, <&dmac 12>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@ff010000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff010000 0x0 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 14>, <&dmac 15>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@ff020000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff020000 0x0 0x1000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 0>, <&dmac 1>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	spdif: spdif@ff030000 {
+		compatible = "rockchip,rk3328-spdif";
+		reg = <0x0 0xff030000 0x0 0x1000>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac 10>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdifm2_tx>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	pdm: pdm@ff040000 {
+		compatible = "rockchip,pdm";
+		reg = <0x0 0xff040000 0x0 0x1000>;
+		clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>;
+		clock-names = "pdm_clk", "pdm_hclk";
+		dmas = <&dmac 16>;
+		dma-names = "rx";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pdmm0_clk
+			     &pdmm0_sdi0
+			     &pdmm0_sdi1
+			     &pdmm0_sdi2
+			     &pdmm0_sdi3>;
+		pinctrl-1 = <&pdmm0_clk_sleep
+			     &pdmm0_sdi0_sleep
+			     &pdmm0_sdi1_sleep
+			     &pdmm0_sdi2_sleep
+			     &pdmm0_sdi3_sleep>;
+		status = "disabled";
+	};
+
+	grf: syscon@ff100000 {
+		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff100000 0x0 0x1000>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3328-io-voltage-domain";
+			status = "disabled";
+		};
+
+		grf_gpio: gpio {
+			compatible = "rockchip,rk3328-grf-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		power: power-controller {
+			compatible = "rockchip,rk3328-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RK3328_PD_HEVC {
+				reg = <RK3328_PD_HEVC>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3328_PD_VIDEO {
+				reg = <RK3328_PD_VIDEO>;
+				clocks = <&cru ACLK_RKVDEC>,
+					 <&cru HCLK_RKVDEC>,
+					 <&cru SCLK_VDEC_CABAC>,
+					 <&cru SCLK_VDEC_CORE>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3328_PD_VPU {
+				reg = <RK3328_PD_VPU>;
+				clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+				#power-domain-cells = <0>;
+			};
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x5c8>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	uart0: serial@ff110000 {
+		compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff110000 0x0 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 2>, <&dmac 3>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff120000 {
+		compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff120000 0x0 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 4>, <&dmac 5>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff130000 {
+		compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff130000 0x0 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 6>, <&dmac 7>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m1_xfer>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff150000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff160000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff170000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff170000 0x0 0x1000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff180000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff180000 0x0 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff190000 {
+		compatible = "rockchip,rk3328-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff190000 0x0 0x1000>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac 8>, <&dmac 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0m2_clk &spi0m2_tx &spi0m2_rx &spi0m2_cs0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@ff1a0000 {
+		compatible = "rockchip,rk3328-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff1a0000 0x0 0x100>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_WDT>;
+	};
+
+	pwm0: pwm@ff1b0000 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff1b0010 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff1b0020 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff1b0030 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0030 0x0 0x10>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwmir_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	dmac: dma-controller@ff1f0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff1f0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				target: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				soc_crit: soc-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+	};
+
+	tsadc: tsadc@ff250000 {
+		compatible = "rockchip,rk3328-tsadc";
+		reg = <0x0 0xff250000 0x0 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <100000>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	efuse: efuse@ff260000 {
+		compatible = "rockchip,rk3328-efuse";
+		reg = <0x0 0xff260000 0x0 0x50>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru SCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+		rockchip,efuse-size = <0x20>;
+
+		/* Data cells */
+		efuse_id: id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpu_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		logic_leakage: logic-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+		efuse_cpu_version: cpu-version@1a {
+			reg = <0x1a 0x1>;
+			bits = <3 3>;
+		};
+	};
+
+	saradc: adc@ff280000 {
+		compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	gpu: gpu@ff300000 {
+		compatible = "rockchip,rk3328-mali", "arm,mali-450";
+		reg = <0x0 0xff300000 0x0 0x30000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1";
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		resets = <&cru SRST_GPU_A>;
+	};
+
+	h265e_mmu: iommu@ff330200 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff330200 0 0x100>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_H265>, <&cru PCLK_H265>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vepu_mmu: iommu@ff340800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff340800 0x0 0x40>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vpu: video-codec@ff350000 {
+		compatible = "rockchip,rk3328-vpu";
+		reg = <0x0 0xff350000 0x0 0x800>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vdpu";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3328_PD_VPU>;
+	};
+
+	vpu_mmu: iommu@ff350800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff350800 0x0 0x40>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3328_PD_VPU>;
+	};
+
+	vdec: video-codec@ff360000 {
+		compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec";
+		reg = <0x0 0xff360000 0x0 0x480>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
+			 <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+		clock-names = "axi", "ahb", "cabac", "core";
+		assigned-clocks = <&cru ACLK_RKVDEC>, <&cru SCLK_VDEC_CABAC>,
+				  <&cru SCLK_VDEC_CORE>;
+		assigned-clock-rates = <400000000>, <400000000>, <300000000>;
+		iommus = <&vdec_mmu>;
+		power-domains = <&power RK3328_PD_VIDEO>;
+	};
+
+	vdec_mmu: iommu@ff360480 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3328_PD_VIDEO>;
+	};
+
+	vop: vop@ff370000 {
+		compatible = "rockchip,rk3328-vop";
+		reg = <0x0 0xff370000 0x0 0x3efc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@ff373f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff373f00 0x0 0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@ff3c0000 {
+		compatible = "rockchip,rk3328-dw-hdmi";
+		reg = <0x0 0xff3c0000 0x0 0x20000>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI>,
+			 <&cru SCLK_HDMI_SFC>,
+			 <&cru SCLK_RTC32K>;
+		clock-names = "iahb",
+			      "isfr",
+			      "cec";
+		phys = <&hdmiphy>;
+		phy-names = "hdmi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	codec: codec@ff410000 {
+		compatible = "rockchip,rk3328-codec";
+		reg = <0x0 0xff410000 0x0 0x1000>;
+		clocks = <&cru PCLK_ACODECPHY>, <&cru SCLK_I2S1>;
+		clock-names = "pclk", "mclk";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmiphy: phy@ff430000 {
+		compatible = "rockchip,rk3328-hdmi-phy";
+		reg = <0x0 0xff430000 0x0 0x10000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+		clock-names = "sysclk", "refoclk", "refpclk";
+		clock-output-names = "hdmi_phy";
+		#clock-cells = <0>;
+		nvmem-cells = <&efuse_cpu_version>;
+		nvmem-cell-names = "cpu-version";
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@ff440000 {
+		compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
+		reg = <0x0 0xff440000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks =
+			/*
+			 * CPLL should run at 1200, but that is to high for
+			 * the initial dividers of most of its children.
+			 * We need set cpll child clk div first,
+			 * and then set the cpll frequency.
+			 */
+			<&cru DCLK_LCDC>, <&cru SCLK_PDM>,
+			<&cru SCLK_RTC32K>, <&cru SCLK_UART0>,
+			<&cru SCLK_UART1>, <&cru SCLK_UART2>,
+			<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+			<&cru ACLK_VIO_PRE>, <&cru ACLK_RGA_PRE>,
+			<&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>,
+			<&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>,
+			<&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>,
+			<&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>,
+			<&cru SCLK_SDIO>, <&cru SCLK_TSP>,
+			<&cru SCLK_WIFI>, <&cru ARMCLK>,
+			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			<&cru ACLK_BUS_PRE>, <&cru HCLK_BUS_PRE>,
+			<&cru PCLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+			<&cru HCLK_PERI>, <&cru PCLK_PERI>,
+			<&cru SCLK_RTC32K>;
+		assigned-clock-parents =
+			<&cru HDMIPHY>, <&cru PLL_APLL>,
+			<&cru PLL_GPLL>, <&xin24m>,
+			<&xin24m>, <&xin24m>;
+		assigned-clock-rates =
+			<0>, <61440000>,
+			<0>, <24000000>,
+			<24000000>, <24000000>,
+			<15000000>, <15000000>,
+			<100000000>, <100000000>,
+			<100000000>, <100000000>,
+			<50000000>, <100000000>,
+			<100000000>, <100000000>,
+			<50000000>, <50000000>,
+			<50000000>, <50000000>,
+			<24000000>, <600000000>,
+			<491520000>, <1200000000>,
+			<150000000>, <75000000>,
+			<75000000>, <150000000>,
+			<75000000>, <75000000>,
+			<32768>;
+	};
+
+	usb2phy_grf: syscon@ff450000 {
+		compatible = "rockchip,rk3328-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2phy@100 {
+			compatible = "rockchip,rk3328-usb2phy";
+			reg = <0x100 0x10>;
+			clocks = <&xin24m>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			#clock-cells = <0>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			status = "disabled";
+
+			u2phy_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+
+			u2phy_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
+	};
+
+	sdmmc: mmc@ff500000 {
+		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff500000 0x0 0x4000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ff510000 {
+		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff510000 0x0 0x4000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	emmc: mmc@ff520000 {
+		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff520000 0x0 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	gmac2io: ethernet@ff540000 {
+		compatible = "rockchip,rk3328-gmac";
+		reg = <0x0 0xff540000 0x0 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_RX>,
+			 <&cru SCLK_MAC2IO_TX>, <&cru SCLK_MAC2IO_REF>,
+			 <&cru SCLK_MAC2IO_REFOUT>, <&cru ACLK_MAC2IO>,
+			 <&cru PCLK_MAC2IO>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		resets = <&cru SRST_GMAC2IO_A>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
+		status = "disabled";
+	};
+
+	gmac2phy: ethernet@ff550000 {
+		compatible = "rockchip,rk3328-gmac";
+		reg = <0x0 0xff550000 0x0 0x10000>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC2PHY_SRC>, <&cru SCLK_MAC2PHY_RXTX>,
+			 <&cru SCLK_MAC2PHY_RXTX>, <&cru SCLK_MAC2PHY_REF>,
+			 <&cru ACLK_MAC2PHY>, <&cru PCLK_MAC2PHY>,
+			 <&cru SCLK_MAC2PHY_OUT>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "aclk_mac", "pclk_mac",
+			      "clk_macphy";
+		resets = <&cru SRST_GMAC2PHY_A>;
+		reset-names = "stmmaceth";
+		phy-mode = "rmii";
+		phy-handle = <&phy>;
+		snps,txpbl = <0x4>;
+		clock_in_out = "output";
+		status = "disabled";
+
+		mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy: ethernet-phy@0 {
+				compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				clocks = <&cru SCLK_MAC2PHY_OUT>;
+				resets = <&cru SRST_MACPHY>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&fephyled_rxm1 &fephyled_linkm1>;
+				phy-is-integrated;
+			};
+		};
+	};
+
+	usb20_otg: usb@ff580000 {
+		compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff580000 0x0 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff5c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@ff5d0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff5d0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usbdrd3: usb@ff600000 {
+		compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
+		reg = <0x0 0xff600000 0x0 0x100000>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+			 <&cru ACLK_USB3OTG>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk";
+		dr_mode = "otg";
+		phy_type = "utmi_wide";
+		snps,dis-del-phy-power-chg-quirk;
+		snps,dis_enblslpm_quirk;
+		snps,dis-tx-ipgap-linecheck-quirk;
+		snps,dis-u2-freeclk-exists-quirk;
+		snps,dis_u2_susphy_quirk;
+		snps,dis_u3_susphy_quirk;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@ff811000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0xff811000 0 0x1000>,
+		      <0x0 0xff812000 0 0x2000>,
+		      <0x0 0xff814000 0 0x2000>,
+		      <0x0 0xff816000 0 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	crypto: crypto@ff060000 {
+		compatible = "rockchip,rk3328-crypto";
+		reg = <0x0 0xff060000 0x0 0x4000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_CRYPTO_MST>, <&cru HCLK_CRYPTO_SLV>,
+			 <&cru SCLK_CRYPTO>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO>;
+		reset-names = "crypto-rst";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3328-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff210000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff210000 0x0 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff220000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff220000 0x0 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff230000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff230000 0x0 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff240000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff240000 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+			bias-disable;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+			bias-pull-up;
+			drive-strength = <12>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		pcfg_input: pcfg-input {
+			input-enable;
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>,
+						<2 RK_PA5 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>,
+						<0 RK_PA6 2 &pcfg_pull_none>;
+			};
+			i2c3_pins: i2c3-pins {
+				rockchip,pins =
+					<0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		hdmi_i2c {
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA5 1 &pcfg_pull_none>,
+						<0 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pdm-0 {
+			pdmm0_clk: pdmm0-clk {
+				rockchip,pins = <2 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_fsync: pdmm0-fsync {
+				rockchip,pins = <2 RK_PC7 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi0: pdmm0-sdi0 {
+				rockchip,pins = <2 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi1: pdmm0-sdi1 {
+				rockchip,pins = <2 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi2: pdmm0-sdi2 {
+				rockchip,pins = <2 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi3: pdmm0-sdi3 {
+				rockchip,pins = <2 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_clk_sleep: pdmm0-clk-sleep {
+				rockchip,pins =
+					<2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi0_sleep: pdmm0-sdi0-sleep {
+				rockchip,pins =
+					<2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi1_sleep: pdmm0-sdi1-sleep {
+				rockchip,pins =
+					<2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi2_sleep: pdmm0-sdi2-sleep {
+				rockchip,pins =
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi3_sleep: pdmm0-sdi3-sleep {
+				rockchip,pins =
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_fsync_sleep: pdmm0-fsync-sleep {
+				rockchip,pins =
+					<2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		tsadc {
+			otp_pin: otp-pin {
+				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>,
+						<1 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_pin: uart0-rts-pin {
+				rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <3 RK_PA4 4 &pcfg_pull_none>,
+						<3 RK_PA6 4 &pcfg_pull_up>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <3 RK_PA7 4 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>;
+			};
+
+			uart1_rts_pin: uart1-rts-pin {
+				rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart2-0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>,
+						<1 RK_PA1 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart2-1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
+						<2 RK_PA1 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi0-0 {
+			spi0m0_clk: spi0m0-clk {
+				rockchip,pins = <2 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_cs0: spi0m0-cs0 {
+				rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_tx: spi0m0-tx {
+				rockchip,pins = <2 RK_PB1 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_rx: spi0m0-rx {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_cs1: spi0m0-cs1 {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi0-1 {
+			spi0m1_clk: spi0m1-clk {
+				rockchip,pins = <3 RK_PC7 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_cs0: spi0m1-cs0 {
+				rockchip,pins = <3 RK_PD2 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_tx: spi0m1-tx {
+				rockchip,pins = <3 RK_PD1 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_rx: spi0m1-rx {
+				rockchip,pins = <3 RK_PD0 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_cs1: spi0m1-cs1 {
+				rockchip,pins = <3 RK_PD3 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi0-2 {
+			spi0m2_clk: spi0m2-clk {
+				rockchip,pins = <3 RK_PA0 4 &pcfg_pull_up>;
+			};
+
+			spi0m2_cs0: spi0m2-cs0 {
+				rockchip,pins = <3 RK_PB0 3 &pcfg_pull_up>;
+			};
+
+			spi0m2_tx: spi0m2-tx {
+				rockchip,pins = <3 RK_PA1 4 &pcfg_pull_up>;
+			};
+
+			spi0m2_rx: spi0m2-rx {
+				rockchip,pins = <3 RK_PA2 4 &pcfg_pull_up>;
+			};
+		};
+
+		i2s1 {
+			i2s1_mclk: i2s1-mclk {
+				rockchip,pins = <2 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sclk: i2s1-sclk {
+				rockchip,pins = <2 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			i2s1_lrckrx: i2s1-lrckrx {
+				rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			i2s1_lrcktx: i2s1-lrcktx {
+				rockchip,pins = <2 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdi: i2s1-sdi {
+				rockchip,pins = <2 RK_PC3 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdo: i2s1-sdo {
+				rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdio1: i2s1-sdio1 {
+				rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdio2: i2s1-sdio2 {
+				rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdio3: i2s1-sdio3 {
+				rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sleep: i2s1-sleep {
+				rockchip,pins =
+					<2 RK_PB7 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC0 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC1 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		i2s2-0 {
+			i2s2m0_mclk: i2s2m0-mclk {
+				rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sclk: i2s2m0-sclk {
+				rockchip,pins = <1 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_lrckrx: i2s2m0-lrckrx {
+				rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_lrcktx: i2s2m0-lrcktx {
+				rockchip,pins = <1 RK_PC7 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sdi: i2s2m0-sdi {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sdo: i2s2m0-sdo {
+				rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sleep: i2s2m0-sleep {
+				rockchip,pins =
+					<1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		i2s2-1 {
+			i2s2m1_mclk: i2s2m1-mclk {
+				rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sclk: i2s2m1-sclk {
+				rockchip,pins = <3 RK_PA0 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_lrckrx: i2sm1-lrckrx {
+				rockchip,pins = <3 RK_PB0 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_lrcktx: i2s2m1-lrcktx {
+				rockchip,pins = <3 RK_PB0 4 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sdi: i2s2m1-sdi {
+				rockchip,pins = <3 RK_PA2 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sdo: i2s2m1-sdo {
+				rockchip,pins = <3 RK_PA1 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sleep: i2s2m1-sleep {
+				rockchip,pins =
+					<1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PA0 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PB0 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PA2 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PA1 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		spdif-0 {
+			spdifm0_tx: spdifm0-tx {
+				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif-1 {
+			spdifm1_tx: spdifm1-tx {
+				rockchip,pins = <2 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		spdif-2 {
+			spdifm2_tx: spdifm2-tx {
+				rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc0-0 {
+			sdmmc0m0_pwren: sdmmc0m0-pwren {
+				rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0m0_pin: sdmmc0m0-pin {
+				rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc0-1 {
+			sdmmc0m1_pwren: sdmmc0m1-pwren {
+				rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0m1_pin: sdmmc0m1-pin {
+				rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc0 {
+			sdmmc0_clk: sdmmc0-clk {
+				rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdmmc0_cmd: sdmmc0-cmd {
+				rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc0_dectn: sdmmc0-dectn {
+				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0_wrprt: sdmmc0-wrprt {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0_bus1: sdmmc0-bus1 {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc0_bus4: sdmmc0-bus4 {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>,
+						<1 RK_PA1 1 &pcfg_pull_up_8ma>,
+						<1 RK_PA2 1 &pcfg_pull_up_8ma>,
+						<1 RK_PA3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc0_pins: sdmmc0-pins {
+				rockchip,pins =
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc0ext {
+			sdmmc0ext_clk: sdmmc0ext-clk {
+				rockchip,pins = <3 RK_PA2 3 &pcfg_pull_none_4ma>;
+			};
+
+			sdmmc0ext_cmd: sdmmc0ext-cmd {
+				rockchip,pins = <3 RK_PA0 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_wrprt: sdmmc0ext-wrprt {
+				rockchip,pins = <3 RK_PA3 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_dectn: sdmmc0ext-dectn {
+				rockchip,pins = <3 RK_PA1 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_bus1: sdmmc0ext-bus1 {
+				rockchip,pins = <3 RK_PA4 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_bus4: sdmmc0ext-bus4 {
+				rockchip,pins =
+					<3 RK_PA4 3 &pcfg_pull_up_4ma>,
+					<3 RK_PA5 3 &pcfg_pull_up_4ma>,
+					<3 RK_PA6 3 &pcfg_pull_up_4ma>,
+					<3 RK_PA7 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_pins: sdmmc0ext-pins {
+				rockchip,pins =
+					<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc1 {
+			sdmmc1_clk: sdmmc1-clk {
+				rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdmmc1_cmd: sdmmc1-cmd {
+				rockchip,pins = <1 RK_PB5 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_pwren: sdmmc1-pwren {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_wrprt: sdmmc1-wrprt {
+				rockchip,pins = <1 RK_PC4 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_dectn: sdmmc1-dectn {
+				rockchip,pins = <1 RK_PC3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_bus1: sdmmc1-bus1 {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_bus4: sdmmc1-bus4 {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>,
+						<1 RK_PB7 1 &pcfg_pull_up_8ma>,
+						<1 RK_PC0 1 &pcfg_pull_up_8ma>,
+						<1 RK_PC1 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_pins: sdmmc1-pins {
+				rockchip,pins =
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <3 RK_PC5 2 &pcfg_pull_none_12ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up_12ma>;
+			};
+
+			emmc_pwren: emmc-pwren {
+				rockchip,pins = <3 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			emmc_rstnout: emmc-rstnout {
+				rockchip,pins = <3 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <0 RK_PA7 2 &pcfg_pull_up_12ma>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins =
+					<0 RK_PA7 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD4 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD5 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD6 2 &pcfg_pull_up_12ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins =
+					<0 RK_PA7 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD4 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD5 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD6 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD7 2 &pcfg_pull_up_12ma>,
+					<3 RK_PC0 2 &pcfg_pull_up_12ma>,
+					<3 RK_PC1 2 &pcfg_pull_up_12ma>,
+					<3 RK_PC2 2 &pcfg_pull_up_12ma>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <2 RK_PA5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwmir {
+			pwmir_pin: pwmir-pin {
+				rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>;
+			};
+		};
+
+		gmac-1 {
+			rgmiim1_pins: rgmiim1-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<1 RK_PB4 2 &pcfg_pull_none_8ma>,
+					/* mac_rxclk */
+					<1 RK_PB5 2 &pcfg_pull_none_4ma>,
+					/* mac_mdio */
+					<1 RK_PC3 2 &pcfg_pull_none_4ma>,
+					/* mac_txen */
+					<1 RK_PD1 2 &pcfg_pull_none_8ma>,
+					/* mac_clk */
+					<1 RK_PC5 2 &pcfg_pull_none_4ma>,
+					/* mac_rxdv */
+					<1 RK_PC6 2 &pcfg_pull_none_4ma>,
+					/* mac_mdc */
+					<1 RK_PC7 2 &pcfg_pull_none_4ma>,
+					/* mac_rxd1 */
+					<1 RK_PB2 2 &pcfg_pull_none_4ma>,
+					/* mac_rxd0 */
+					<1 RK_PB3 2 &pcfg_pull_none_4ma>,
+					/* mac_txd1 */
+					<1 RK_PB0 2 &pcfg_pull_none_8ma>,
+					/* mac_txd0 */
+					<1 RK_PB1 2 &pcfg_pull_none_8ma>,
+					/* mac_rxd3 */
+					<1 RK_PB6 2 &pcfg_pull_none_4ma>,
+					/* mac_rxd2 */
+					<1 RK_PB7 2 &pcfg_pull_none_4ma>,
+					/* mac_txd3 */
+					<1 RK_PC0 2 &pcfg_pull_none_8ma>,
+					/* mac_txd2 */
+					<1 RK_PC1 2 &pcfg_pull_none_8ma>,
+
+					/* mac_txclk */
+					<0 RK_PB0 1 &pcfg_pull_none_8ma>,
+					/* mac_txen */
+					<0 RK_PB4 1 &pcfg_pull_none_8ma>,
+					/* mac_clk */
+					<0 RK_PD0 1 &pcfg_pull_none_4ma>,
+					/* mac_txd1 */
+					<0 RK_PC0 1 &pcfg_pull_none_8ma>,
+					/* mac_txd0 */
+					<0 RK_PC1 1 &pcfg_pull_none_8ma>,
+					/* mac_txd3 */
+					<0 RK_PC7 1 &pcfg_pull_none_8ma>,
+					/* mac_txd2 */
+					<0 RK_PC6 1 &pcfg_pull_none_8ma>;
+			};
+
+			rmiim1_pins: rmiim1-pins {
+				rockchip,pins =
+					/* mac_mdio */
+					<1 RK_PC3 2 &pcfg_pull_none_2ma>,
+					/* mac_txen */
+					<1 RK_PD1 2 &pcfg_pull_none_12ma>,
+					/* mac_clk */
+					<1 RK_PC5 2 &pcfg_pull_none_2ma>,
+					/* mac_rxer */
+					<1 RK_PD0 2 &pcfg_pull_none_2ma>,
+					/* mac_rxdv */
+					<1 RK_PC6 2 &pcfg_pull_none_2ma>,
+					/* mac_mdc */
+					<1 RK_PC7 2 &pcfg_pull_none_2ma>,
+					/* mac_rxd1 */
+					<1 RK_PB2 2 &pcfg_pull_none_2ma>,
+					/* mac_rxd0 */
+					<1 RK_PB3 2 &pcfg_pull_none_2ma>,
+					/* mac_txd1 */
+					<1 RK_PB0 2 &pcfg_pull_none_12ma>,
+					/* mac_txd0 */
+					<1 RK_PB1 2 &pcfg_pull_none_12ma>,
+
+					/* mac_mdio */
+					<0 RK_PB3 1 &pcfg_pull_none>,
+					/* mac_txen */
+					<0 RK_PB4 1 &pcfg_pull_none>,
+					/* mac_clk */
+					<0 RK_PD0 1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<0 RK_PC3 1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<0 RK_PC0 1 &pcfg_pull_none>,
+					/* mac_txd0 */
+					<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		gmac2phy {
+			fephyled_speed10: fephyled-speed10 {
+				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
+			};
+
+			fephyled_duplex: fephyled-duplex {
+				rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
+			};
+
+			fephyled_rxm1: fephyled-rxm1 {
+				rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
+			};
+
+			fephyled_txm1: fephyled-txm1 {
+				rockchip,pins = <2 RK_PD1 3 &pcfg_pull_none>;
+			};
+
+			fephyled_linkm1: fephyled-linkm1 {
+				rockchip,pins = <2 RK_PD0 2 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc_pin {
+			tsadc_int: tsadc-int {
+				rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>;
+			};
+			tsadc_pin: tsadc-pin {
+				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		hdmi_pin {
+			hdmi_cec: hdmi-cec {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PA4 1 &pcfg_pull_down>;
+			};
+		};
+
+		cif-0 {
+			dvp_d2d9_m0:dvp-d2d9-m0 {
+				rockchip,pins =
+					/* cif_d0 */
+					<3 RK_PA4 2 &pcfg_pull_none>,
+					/* cif_d1 */
+					<3 RK_PA5 2 &pcfg_pull_none>,
+					/* cif_d2 */
+					<3 RK_PA6 2 &pcfg_pull_none>,
+					/* cif_d3 */
+					<3 RK_PA7 2 &pcfg_pull_none>,
+					/* cif_d4 */
+					<3 RK_PB0 2 &pcfg_pull_none>,
+					/* cif_d5m0 */
+					<3 RK_PB1 2 &pcfg_pull_none>,
+					/* cif_d6m0 */
+					<3 RK_PB2 2 &pcfg_pull_none>,
+					/* cif_d7m0 */
+					<3 RK_PB3 2 &pcfg_pull_none>,
+					/* cif_href */
+					<3 RK_PA1 2 &pcfg_pull_none>,
+					/* cif_vsync */
+					<3 RK_PA0 2 &pcfg_pull_none>,
+					/* cif_clkoutm0 */
+					<3 RK_PA3 2 &pcfg_pull_none>,
+					/* cif_clkin */
+					<3 RK_PA2 2 &pcfg_pull_none>;
+			};
+		};
+
+		cif-1 {
+			dvp_d2d9_m1:dvp-d2d9-m1 {
+				rockchip,pins =
+					/* cif_d0 */
+					<3 RK_PA4 2 &pcfg_pull_none>,
+					/* cif_d1 */
+					<3 RK_PA5 2 &pcfg_pull_none>,
+					/* cif_d2 */
+					<3 RK_PA6 2 &pcfg_pull_none>,
+					/* cif_d3 */
+					<3 RK_PA7 2 &pcfg_pull_none>,
+					/* cif_d4 */
+					<3 RK_PB0 2 &pcfg_pull_none>,
+					/* cif_d5m1 */
+					<2 RK_PC0 4 &pcfg_pull_none>,
+					/* cif_d6m1 */
+					<2 RK_PC1 4 &pcfg_pull_none>,
+					/* cif_d7m1 */
+					<2 RK_PC2 4 &pcfg_pull_none>,
+					/* cif_href */
+					<3 RK_PA1 2 &pcfg_pull_none>,
+					/* cif_vsync */
+					<3 RK_PA0 2 &pcfg_pull_none>,
+					/* cif_clkoutm1 */
+					<2 RK_PB7 4 &pcfg_pull_none>,
+					/* cif_clkin */
+					<3 RK_PA2 2 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
new file mode 100644
index 0000000000..160f2c7e95
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
+ */
+
+/dts-v1/;
+#include "rk3368-evb.dtsi"
+
+/ {
+	model = "Rockchip RK3368 EVB with ACT8846 pmic";
+	compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
new file mode 100644
index 0000000000..e47d1398ae
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3368.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			wakeup-source;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	clock_in_out = "output";
+	snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_rst: bt-rst {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
new file mode 100644
index 0000000000..be06e6e64d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "GeekBox";
+	compatible = "geekbuying,geekbox", "rockchip,rk3368";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		blue_led: led-0 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:blue:led";
+			default-state = "on";
+		};
+
+		red_led: led-1 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:red:led";
+			default-state = "off";
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	clock-frequency = <150000000>;
+	non-removable;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_flash>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&gmac {
+	status = "okay";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_cpu";
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_log";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vcc18_flash: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_flash";
+			};
+
+			vcc33_lcd: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_lcd";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			vcca_18: LDO_REG4 {
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_18";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lan";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>; /* CRU */
+	rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
new file mode 100644
index 0000000000..cae01d35b9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3368-lion.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3368-uQ7 Baseboard";
+	compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
+
+	aliases {
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2cmux2 {
+		i2c@0 {
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	leds {
+		pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
+
+		sd_card_led: led-3 {
+			label = "sd_card_led";
+			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <25000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi2 {
+	cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	/* alternate function of GPIO5/6 */
+	status = "disabled";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&haikou_pin_hog>;
+
+	hog {
+		haikou_pin_hog: haikou-pin-hog {
+			rockchip,pins =
+				/* LID_BTN */
+				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* BATLOW# */
+				<0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* SLP_BTN# */
+				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* BIOS_DISABLE# */
+				<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sd_card_led_pin: sd-card-led-pin {
+			rockchip,pins =
+				<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_cd_pin: sdmmc-cd-pin {
+			rockchip,pins =
+				<2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+				<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
new file mode 100644
index 0000000000..5753e57fd7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	i2cmux1 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c1>;
+		mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+
+		/* Q7_GP0_I2C */
+		i2c_gp0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* Q7_SMB */
+		i2c_smb: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2cmux2 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+
+		/* Q7_LVDS_BLC_I2C */
+		i2c_lvds_blc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fan: fan@18 {
+				compatible = "ti,amc6821";
+				reg = <0x18>;
+				#cooling-cells = <2>;
+			};
+
+			rtc_twi: rtc@6f {
+				compatible = "isil,isl1208";
+				reg = <0x6f>;
+			};
+		};
+
+		/* Q7_GP2_I2C = LVDS_DID_CLK/DAT */
+		i2c_gp2: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pins>;
+
+		module_led1: led-1 {
+			label = "module_led1";
+			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+
+		module_led2: led-2 {
+			label = "module_led2";
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	clock-frequency = <150000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc33_io>;
+	vqmmc-supply = <&vcc_18>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc33_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc33_io: DCDC_REG4 {
+				regulator-name = "vcc33_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc33_video: LDO_REG2 {
+				regulator-name = "vcc33_video";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd10_pll: LDO_REG3 {
+				regulator-name = "vdd10_pll";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd10_video: LDO_REG6 {
+				regulator-name = "vdd10_video";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_video: LDO_REG8 {
+				regulator-name = "vcc18_video";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+/* The RK3368-uQ7 "Lion" has most IO voltages hardwired to 3.3V. */
+&io_domains {
+	audio-supply = <&vcc33_io>;
+	dvp-supply = <&vcc33_io>;
+	flash0-supply = <&vcc_18>;
+	gpio30-supply = <&vcc33_io>;
+	gpio1830-supply = <&vcc33_io>;
+	sdcard-supply = <&vcc33_io>;
+	wifi-supply = <&vcc33_io>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		module_led_pins: module-led-pins {
+			rockchip,pins =
+				<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu-supply = <&vcc33_io>;
+	vop-supply = <&vcc33_io>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	norflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
new file mode 100644
index 0000000000..81d1064fdb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3368.dtsi"
+
+/ {
+	model = "Rockchip Orion R68";
+	compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			wakeup-source;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		red_led: led-0 {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			label = "orion:red:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+			default-state = "on";
+		};
+
+		blue_led: led-1 {
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+			label = "orion:blue:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&stby_pwren>;
+			default-state = "off";
+		};
+	};
+
+	vcc_18: vcc18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: vcc-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd";
+		gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccio_sd: vcc-io-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vccio_wl: vccio-wl-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vdd_10: vdd-10-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_10";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	mmc-hs200-1_2v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		/* rtc_int is not connected */
+	};
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		stby_pwren: stby-pwren {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_ctl: led-ctl {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_cd: sdmmc-cd {
+			rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>,
+					<2 RK_PA6 1 &pcfg_pull_up_drv_8ma>,
+					<2 RK_PA7 1 &pcfg_pull_up_drv_8ma>,
+					<2 RK_PB0 1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
new file mode 100644
index 0000000000..29df84b815
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip PX5 EVB";
+	compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x0 0x0 0x0 0x40000000>;
+		device_type = "memory";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	clock-frequency = <150000000>;
+	mmc-hs200-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_flash>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_cpu";
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_log";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vcc18_flash: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_flash";
+			};
+
+			vcca_33: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_33";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			avdd_33: LDO_REG4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "avdd_33";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+			};
+
+			vcc33_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lcd";
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	gsl1680: touchscreen@40 {
+		compatible = "silead,gsl1680";
+		reg = <0x40>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PD4 IRQ_TYPE_EDGE_FALLING>;
+		power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		silead,max-fingers = <5>;
+	};
+};
+
+&pinctrl {
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdmmc {
+	status = "okay";
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	no-sdio;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>; /* CRU */
+	rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
new file mode 100644
index 0000000000..5589f3db6b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip R88";
+	compatible = "rockchip,r88", "rockchip,rk3368";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			wakeup-source;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		work_led: led-0 {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			label = "r88:green:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+		};
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_rst>, <&wifi_reg_on>;
+
+		reset-gpios =
+			/* BT_RST_N */
+			<&gpio3 RK_PA5 GPIO_ACTIVE_LOW>,
+
+			/* WL_REG_ON */
+			<&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_18: vcc18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccio_wl: vccio-wl-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vdd_10: vdd-10-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_10";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	clock_in_out = "output";
+	snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		/* rtc_int is not connected */
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcc_io>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	wifi-supply = <&vccio_wl>;
+};
+
+&sdio0 {
+	assigned-clocks = <&cru SCLK_SDIO0>;
+	assigned-clock-parents = <&cru PLL_CPLL>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vccio_wl>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		stby_pwren: stby-pwren {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_ctl: led-ctl {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_rst: bt-rst {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmu-supply = <&vcc_io>;
+	vop-supply = <&vcc_io>;
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
new file mode 100644
index 0000000000..a4c5aaf1f4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -0,0 +1,1393 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/clock/rk3368-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3368-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3368";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_b0>;
+				};
+				core1 {
+					cpu = <&cpu_b1>;
+				};
+				core2 {
+					cpu = <&cpu_b2>;
+				};
+				core3 {
+					cpu = <&cpu_b3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_l0>;
+				};
+				core1 {
+					cpu = <&cpu_l1>;
+				};
+				core2 {
+					cpu = <&cpu_l2>;
+				};
+				core3 {
+					cpu = <&cpu_l3>;
+				};
+			};
+		};
+
+		cpu_l0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_l1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_l2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_l3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu_l0>, <&cpu_l1>, <&cpu_l2>,
+				     <&cpu_l3>, <&cpu_b0>, <&cpu_b1>,
+				     <&cpu_b2>, <&cpu_b3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	sdmmc: mmc@ff0c0000 {
+		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff0c0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_MMC0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio0: mmc@ff0d0000 {
+		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff0d0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
+			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_SDIO0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@ff0f0000 {
+		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff0f0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	spi0: spi@ff110000 {
+		compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff110000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff120000 {
+		compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff130000 {
+		compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff140000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff150000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff160000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff170000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff170000 0x0 0x1000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff180000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff190000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1b0000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff1c0000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1c0000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	dmac_peri: dma-controller@ff250000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff250000 0x0 0x4000>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC_PERI>;
+		clock-names = "apb_pclk";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+					<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <115000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,rk3368-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		#thermal-sensor-cells = <1>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff290000 {
+		compatible = "rockchip,rk3368-gmac";
+		reg = <0x0 0xff290000 0x0 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		rockchip,grf = <&grf>;
+		clocks = <&cru SCLK_MAC>,
+			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			"mac_clk_rx", "mac_clk_tx",
+			"clk_mac_ref", "clk_mac_refout",
+			"aclk_mac", "pclk_mac";
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff500000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff500000 0x0 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>;
+		status = "disabled";
+	};
+
+	usb_otg: usb@ff580000 {
+		compatible = "rockchip,rk3368-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x0 0xff580000 0x0 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		status = "disabled";
+	};
+
+	dmac_bus: dma-controller@ff600000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff600000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC_BUS>;
+		clock-names = "apb_pclk";
+	};
+
+	i2c0: i2c@ff650000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff650000 0x0 0x1000>;
+		clocks = <&cru PCLK_I2C0>;
+		clock-names = "i2c";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff660000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff660000 0x0 0x1000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff680000 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff680010 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff680020 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680020 0x0 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM1>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff680030 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff690000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff690000 0x0 0x100>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mbox: mbox@ff6b0000 {
+		compatible = "rockchip,rk3368-mailbox";
+		reg = <0x0 0xff6b0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MAILBOX>;
+		clock-names = "pclk_mailbox";
+		#mbox-cells = <1>;
+		status = "disabled";
+	};
+
+	pmu: power-management@ff730000 {
+		compatible = "rockchip,rk3368-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff730000 0x0 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3368-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/*
+			 * Note: Although SCLK_* are the working clocks
+			 * of device without including on the NOC, needed for
+			 * synchronous reset.
+			 *
+			 * The clocks on the which NOC:
+			 * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+			 * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+			 * ACLK_RGA is on ACLK_RGA_NIU.
+			 * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+			 *
+			 * Which clock are device clocks:
+			 *	clocks		devices
+			 *	*_IEP		IEP:Image Enhancement Processor
+			 *	*_ISP		ISP:Image Signal Processing
+			 *	*_VIP		VIP:Video Input Processor
+			 *	*_VOP*		VOP:Visual Output Processor
+			 *	*_RGA		RGA
+			 *	*_EDP*		EDP
+			 *	*_DPHY*		LVDS
+			 *	*_HDMI		HDMI
+			 *	*_MIPI_*	MIPI
+			 */
+			power-domain@RK3368_PD_VIO {
+				reg = <RK3368_PD_VIO>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru ACLK_ISP>,
+					 <&cru ACLK_VIP>,
+					 <&cru ACLK_RGA>,
+					 <&cru ACLK_VOP>,
+					 <&cru ACLK_VOP_IEP>,
+					 <&cru DCLK_VOP>,
+					 <&cru HCLK_IEP>,
+					 <&cru HCLK_ISP>,
+					 <&cru HCLK_RGA>,
+					 <&cru HCLK_VIP>,
+					 <&cru HCLK_VOP>,
+					 <&cru HCLK_VIO_HDCPMMU>,
+					 <&cru PCLK_EDP_CTRL>,
+					 <&cru PCLK_HDMI_CTRL>,
+					 <&cru PCLK_HDCP>,
+					 <&cru PCLK_ISP>,
+					 <&cru PCLK_VIP>,
+					 <&cru PCLK_DPHYRX>,
+					 <&cru PCLK_DPHYTX0>,
+					 <&cru PCLK_MIPI_CSI>,
+					 <&cru PCLK_MIPI_DSI0>,
+					 <&cru SCLK_VOP0_PWM>,
+					 <&cru SCLK_EDP_24M>,
+					 <&cru SCLK_EDP>,
+					 <&cru SCLK_HDCP>,
+					 <&cru SCLK_ISP>,
+					 <&cru SCLK_RGA>,
+					 <&cru SCLK_HDMI_CEC>,
+					 <&cru SCLK_HDMI_HDCP>;
+				pm_qos = <&qos_iep>,
+					 <&qos_isp_r0>,
+					 <&qos_isp_r1>,
+					 <&qos_isp_w0>,
+					 <&qos_isp_w1>,
+					 <&qos_vip>,
+					 <&qos_vop>,
+					 <&qos_rga_r>,
+					 <&qos_rga_w>;
+				#power-domain-cells = <0>;
+			};
+
+			/*
+			 * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+			 * (video endecoder & decoder) clocks that on the
+			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+			 */
+			power-domain@RK3368_PD_VIDEO {
+				reg = <RK3368_PD_VIDEO>;
+				clocks = <&cru ACLK_VIDEO>,
+					 <&cru HCLK_VIDEO>,
+					 <&cru SCLK_HEVC_CABAC>,
+					 <&cru SCLK_HEVC_CORE>;
+				pm_qos = <&qos_hevc_r>,
+					 <&qos_vpu_r>,
+					 <&qos_vpu_w>;
+				#power-domain-cells = <0>;
+			};
+
+			/*
+			 * Note: ACLK_GPU is the GPU clock,
+			 * and on the ACLK_GPU_NIU (NOC).
+			 */
+			power-domain@RK3368_PD_GPU_1 {
+				reg = <RK3368_PD_GPU_1>;
+				clocks = <&cru ACLK_GPU_CFG>,
+					 <&cru ACLK_GPU_MEM>,
+					 <&cru SCLK_GPU_CORE>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	pmugrf: syscon@ff738000 {
+		compatible = "rockchip,rk3368-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xff738000 0x0 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3368-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x200>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3368-cru";
+		reg = <0x0 0xff760000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3368-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff770000 0x0 0x1000>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3368-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	wdt: watchdog@ff800000 {
+		compatible = "rockchip,rk3368-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff800000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	timer0: timer@ff810000 {
+		compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xff810000 0x0 0x20>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+		clock-names = "pclk", "timer";
+	};
+
+	spdif: spdif@ff880000 {
+		compatible = "rockchip,rk3368-spdif";
+		reg = <0x0 0xff880000 0x0 0x1000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac_bus 3>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		status = "disabled";
+	};
+
+	i2s_2ch: i2s-2ch@ff890000 {
+		compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff890000 0x0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
+		dmas = <&dmac_bus 6>, <&dmac_bus 7>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s_8ch: i2s-8ch@ff898000 {
+		compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff898000 0x0 0x1000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S_8CH>, <&cru HCLK_I2S_8CH>;
+		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_8ch_bus>;
+		status = "disabled";
+	};
+
+	iep_mmu: iommu@ff900800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff900800 0x0 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3368_PD_VIO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp_mmu: iommu@ff914000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff914000 0x0 0x100>,
+		      <0x0 0xff915000 0x0 0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3368_PD_VIO>;
+		rockchip,disable-mmu-reset;
+		status = "disabled";
+	};
+
+	vop_mmu: iommu@ff930300 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff930300 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3368_PD_VIO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	hevc_mmu: iommu@ff9a0440 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9a0440 0x0 0x40>,
+		      <0x0 0xff9a0480 0x0 0x40>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vpu_mmu: iommu@ff9a0800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9a0800 0x0 0x100>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	qos_iep: qos@ffad0000 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+
+	qos_isp_r0: qos@ffad0080 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0080 0x0 0x20>;
+	};
+
+	qos_isp_r1: qos@ffad0100 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0100 0x0 0x20>;
+	};
+
+	qos_isp_w0: qos@ffad0180 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0180 0x0 0x20>;
+	};
+
+	qos_isp_w1: qos@ffad0200 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0200 0x0 0x20>;
+	};
+
+	qos_vip: qos@ffad0280 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0280 0x0 0x20>;
+	};
+
+	qos_vop: qos@ffad0300 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0300 0x0 0x20>;
+	};
+
+	qos_rga_r: qos@ffad0380 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0380 0x0 0x20>;
+	};
+
+	qos_rga_w: qos@ffad0400 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0400 0x0 0x20>;
+	};
+
+	qos_hevc_r: qos@ffae0000 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+
+	qos_vpu_r: qos@ffae0100 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffae0100 0x0 0x20>;
+	};
+
+	qos_vpu_w: qos@ffae0180 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffae0180 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ffaf0000 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffaf0000 0x0 0x20>;
+	};
+
+	efuse256: efuse@ffb00000 {
+		compatible = "rockchip,rk3368-efuse";
+		reg = <0x0 0xffb00000 0x0 0x20>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE256>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		temp_adjust: temp-adjust@1f {
+			reg = <0x1f 0x1>;
+		};
+	};
+
+	gic: interrupt-controller@ffb71000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x0 0xffb71000 0x0 0x1000>,
+		      <0x0 0xffb72000 0x0 0x2000>,
+		      <0x0 0xffb74000 0x0 0x2000>,
+		      <0x0 0xffb76000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3368-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		ranges;
+
+		gpio0: gpio@ff750000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff750000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO0>;
+			interrupts = <GIC_SPI 0x51 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio1: gpio@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff780000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO1>;
+			interrupts = <GIC_SPI 0x52 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio2: gpio@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff790000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO2>;
+			interrupts = <GIC_SPI 0x53 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio3: gpio@ff7a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff7a0000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO3>;
+			interrupts = <GIC_SPI 0x54 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+						<1 RK_PC3 2 &pcfg_pull_up>,
+						<1 RK_PC4 2 &pcfg_pull_up>,
+						<1 RK_PC5 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+						<1 RK_PC3 2 &pcfg_pull_up>,
+						<1 RK_PC4 2 &pcfg_pull_up>,
+						<1 RK_PC5 2 &pcfg_pull_up>,
+						<1 RK_PC6 2 &pcfg_pull_up>,
+						<1 RK_PC7 2 &pcfg_pull_up>,
+						<1 RK_PD0 2 &pcfg_pull_up>,
+						<1 RK_PD1 2 &pcfg_pull_up>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
+						<3 RK_PD0 1 &pcfg_pull_none>,
+						<3 RK_PC3 1 &pcfg_pull_none>,
+						<3 RK_PB0 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB1 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB2 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB6 1 &pcfg_pull_none_12ma>,
+						<3 RK_PD4 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB5 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB7 1 &pcfg_pull_none>,
+						<3 RK_PC0 1 &pcfg_pull_none>,
+						<3 RK_PC1 1 &pcfg_pull_none>,
+						<3 RK_PC2 1 &pcfg_pull_none>,
+						<3 RK_PD1 1 &pcfg_pull_none>,
+						<3 RK_PC4 1 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
+						<3 RK_PD0 1 &pcfg_pull_none>,
+						<3 RK_PC3 1 &pcfg_pull_none>,
+						<3 RK_PB0 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB1 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB5 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB7 1 &pcfg_pull_none>,
+						<3 RK_PC0 1 &pcfg_pull_none>,
+						<3 RK_PC4 1 &pcfg_pull_none>,
+						<3 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
+						<0 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>,
+						<2 RK_PC6 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_none>,
+						<3 RK_PD7 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>,
+						<1 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>,
+						<3 RK_PD1 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins = <3 RK_PD2 2 &pcfg_pull_none>,
+						<3 RK_PD3 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_8ch_bus: i2s-8ch-bus {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>,
+						<2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>,
+						<2 RK_PB7 1 &pcfg_pull_none>,
+						<2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PC1 1 &pcfg_pull_none>,
+						<2 RK_PC2 1 &pcfg_pull_none>,
+						<2 RK_PC3 1 &pcfg_pull_none>,
+						<2 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <3 RK_PD5 3 &pcfg_pull_none>;
+			};
+		};
+
+		sdio0 {
+			sdio0_bus1: sdio0-bus1 {
+				rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bus4: sdio0-bus4 {
+				rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>,
+						<2 RK_PD5 1 &pcfg_pull_up>,
+						<2 RK_PD6 1 &pcfg_pull_up>,
+						<2 RK_PD7 1 &pcfg_pull_up>;
+			};
+
+			sdio0_cmd: sdio0-cmd {
+				rockchip,pins = <3 RK_PA0 1 &pcfg_pull_up>;
+			};
+
+			sdio0_clk: sdio0-clk {
+				rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>;
+			};
+
+			sdio0_cd: sdio0-cd {
+				rockchip,pins = <3 RK_PA2 1 &pcfg_pull_up>;
+			};
+
+			sdio0_wp: sdio0-wp {
+				rockchip,pins = <3 RK_PA3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_pwr: sdio0-pwr {
+				rockchip,pins = <3 RK_PA4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bkpwr: sdio0-bkpwr {
+				rockchip,pins = <3 RK_PA5 1 &pcfg_pull_up>;
+			};
+
+			sdio0_int: sdio0-int {
+				rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>,
+						<2 RK_PA6 1 &pcfg_pull_up>,
+						<2 RK_PA7 1 &pcfg_pull_up>,
+						<2 RK_PB0 1 &pcfg_pull_up>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <1 RK_PD5 2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <1 RK_PD0 3 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <1 RK_PD1 3 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <1 RK_PC7 3 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <1 RK_PC6 3 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <1 RK_PB7 2 &pcfg_pull_up>;
+			};
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <3 RK_PD4 2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <1 RK_PC0 2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <1 RK_PC1 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi2 {
+			spi2_clk: spi2-clk {
+				rockchip,pins = <0 RK_PB4 2 &pcfg_pull_up>;
+			};
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>;
+			};
+			spi2_rx: spi2-rx {
+				rockchip,pins = <0 RK_PB2 2 &pcfg_pull_up>;
+			};
+			spi2_tx: spi2-tx {
+				rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>;
+			};
+		};
+
+		tsadc {
+			otp_pin: otp-pin {
+				rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <0 RK_PC4 3 &pcfg_pull_up>,
+						<0 RK_PC5 3 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <0 RK_PC6 3 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <0 RK_PC7 3 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <2 RK_PA6 2 &pcfg_pull_up>,
+						<2 RK_PA5 2 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <3 RK_PD5 2 &pcfg_pull_up>,
+						<3 RK_PD6 3 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <3 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins = <0 RK_PD3 3 &pcfg_pull_up>,
+						<0 RK_PD2 3 &pcfg_pull_none>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins = <0 RK_PD0 3 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins = <0 RK_PD1 3 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
new file mode 100644
index 0000000000..6464ef4d11
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
@@ -0,0 +1,939 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "OPEN AI LAB EAIDK-610";
+	compatible = "openailab,eaidk-610", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&user_led_pin>,
+			    <&heartbeat_led_pin>, <&wlan_active_led_pin>,
+			    <&bt_active_led_pin>;
+
+		work_led: led-0 {
+			label = "blue:work";
+			default-state = "on";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+
+		user_led: led-1 {
+			label = "read:user";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		};
+
+		heartbeat_led: led-2 {
+			label = "green:heartbeat";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan_active_led: led-3 {
+			label = "yellow:wlan";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led: led-4 {
+			label = "blue:bt";
+			gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	rt5651-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "realtek,rt5651-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Mic Jack", "MICBIAS1",
+			"IN1P", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rt5651>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	/* For USB3.0 Port1/2 */
+	vcc5v0_host1: vcc5v0-host1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host1_en>;
+		regulator-name = "vcc5v0_host1";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* For USB2.0 Port1/2 */
+	vcc5v0_host3: vcc5v0-host3-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host3_en>;
+		regulator-name = "vcc5v0_host3";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG2 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	rt5651: audio-codec@1a {
+		compatible = "rockchip,rt5651";
+		reg = <0x1a>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+		spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usbc0_role_sw: endpoint@0 {
+					remote-endpoint = <&dwc3_0_role_switch>;
+				};
+			};
+		};
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint = <&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint = <&tcphy0_typec_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca1v8_codec>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		work_led_pin: work-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led_pin: user-led-pin {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		heartbeat_led_pin: heartbeat-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_active_led_pin: wlan-led-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_active_led_pin: bt-led-pin {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	rt5651 {
+		rt5651_hpcon: rt5640-hpcon {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host3_en: vcc5v0-host3-en {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host1_en: vcc5v0-host1-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	/* WiFi & BT combo module AMPAK AP6255 */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_usb3 {
+	orientation-switch;
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host3>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host3>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	usb-role-switch;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
new file mode 100644
index 0000000000..3d1e126b55
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+
+/ {
+	model = "Rockchip RK3399 Evaluation Board";
+	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "lg,lp079qx1-sp0v";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vcc3v3_s0>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vdd_center: vdd-center {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 25000 0>;
+		regulator-name = "vdd_center";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&edp {
+	status = "okay";
+	force-hpd;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "disabled";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
new file mode 100644
index 0000000000..1ce85a5816
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+
+/ {
+	model = "96boards RK3399 Ficus";
+	compatible = "vamrs,ficus", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+			    <&user_led3_pin>, <&user_led4_pin>,
+			    <&wlan_led_pin>, <&bt_led_pin>;
+
+		user_led1: led-1 {
+			label = "red:user1";
+			gpios = <&gpio4 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2: led-2 {
+			label = "red:user2";
+			gpios = <&gpio4 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3: led-3 {
+			label = "red:user3";
+			gpios = <&gpio4 30 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4: led-4 {
+			label = "red:user4";
+			gpios = <&gpio1 0 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led: led-5 {
+			label = "red:wlan";
+			gpios = <&gpio1 1 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led: led-6 {
+			label = "red:bt";
+			gpios = <&gpio1 4 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_sys>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+	gmac {
+		rgmii_sleep_pins: rgmii-sleep-pins {
+			rockchip,pins =
+				<3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins =
+				<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led1_pin: user-led1-pin {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2_pin: user-led2-pin {
+			rockchip,pins =
+				<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3_pin: user-led3-pin {
+			rockchip,pins =
+				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4_pin: user-led4-pin {
+			rockchip,pins =
+				<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led_pin: wlan-led-pin {
+			rockchip,pins =
+				<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led_pin: bt-led-pin {
+			rockchip,pins =
+				<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spi1 {
+	/* On both Low speed and High speed expansion */
+	cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&vcc3v3_pcie {
+	gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+	gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
new file mode 100644
index 0000000000..c5db64f3e1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -0,0 +1,943 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Firefly-RK3399 Board";
+	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm0 0 25000 0>;
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
+
+		work_led: led-0 {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy_led: led-1 {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	rt5640-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rockchip,rt5640-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Mic Jack", "MICBIAS1",
+			"IN1P", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rt5640>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-dit {
+		compatible = "audio-graph-card";
+		label = "SPDIF";
+		dais = <&spdif_p0>;
+	};
+
+	spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port {
+			dit_p0_0: endpoint {
+				remote-endpoint = <&spdif_p0_0>;
+			};
+		};
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <430000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG2 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <0>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	rt5640: rt5640@1c {
+		compatible = "realtek,rt5640";
+		reg = <0x1c>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		realtek,in1-differential;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt5640_hpcon>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "host";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint =
+							<&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	accelerometer@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		work_led_pin: work-led-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_pin: diy-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_3g_drv: pcie-3g-drv {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	rt5640 {
+		rt5640_hpcon: rt5640-hpcon {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	/* WiFi & BT combo module Ampak AP6356S */
+	bus-width = <4>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+
+	/* Power supply */
+	vqmmc-supply = <&vcc1v8_s3>;	/* IO line */
+	vmmc-supply = <&vcc_sdio>;	/* card's power */
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		brcm,drive-strength = <5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdif_bus_1>;
+	status = "okay";
+
+	spdif_p0: port {
+		spdif_p0_0: endpoint {
+			remote-endpoint = <&dit_p0_0>;
+		};
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
new file mode 100644
index 0000000000..0f9cc042d9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Bob Rev 4+ board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3399-gru-chromebook.dtsi"
+
+/ {
+	model = "Google Bob";
+	compatible = "google,bob-rev13", "google,bob-rev12",
+		     "google,bob-rev11", "google,bob-rev10",
+		     "google,bob-rev9", "google,bob-rev8",
+		     "google,bob-rev7", "google,bob-rev6",
+		     "google,bob-rev5", "google,bob-rev4",
+		     "google,bob", "google,gru", "rockchip,rk3399";
+	chassis-type = "convertible";
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv101wxmn51";
+		backlight = <&backlight>;
+		power-supply = <&pp3300_disp>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l &touch_reset_l>;
+		reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ap_i2c_tp {
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int_l>;
+		wakeup-source;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_alert1 {
+	temperature = <70000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_int_od_l>;
+		spi-max-frequency = <800000>;
+	};
+};
+
+&pinctrl {
+	tpm {
+		h1_int_od_l: h1-int-od-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&wlan_host_wake_l {
+	/* Kevin has an external pull up, but Bob does not. */
+	rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
new file mode 100644
index 0000000000..cacbad35cf
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Chromebook shared properties
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#include "rk3399-gru.dtsi"
+
+/ {
+	pp900_ap: pp900-ap {
+		compatible = "regulator-fixed";
+		regulator-name = "pp900_ap";
+
+		/* EC turns on w/ pp900_ap_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* EC turns on w/ pp900_usb_en */
+	pp900_usb: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pcie_en */
+	pp900_pcie: pp900-ap {
+	};
+
+	pp3000: pp3000 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3000_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_centerlogic_pwm";
+
+		pwms = <&pwm3 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+	};
+
+	ppvar_centerlogic: ppvar-centerlogic {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_centerlogic";
+
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+
+		ctrl-supply = <&ppvar_centerlogic_pwm>;
+		ctrl-voltage-range = <799434 1049925>;
+
+		regulator-settling-time-up-us = <378>;
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};
+
+	/* Schematics call this PPVAR even though it's fixed */
+	ppvar_logic: ppvar-logic {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_logic";
+
+		/* EC turns on w/ ppvar_logic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800_audio: pp1800-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_audio_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* gpio is shared with pp3300_wifi_bt */
+	pp1800_pcie: pp1800-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_pcie";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_pd_l>;
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		/*
+		 * Need to wait 1ms + ramp-up time before we can power on WiFi.
+		 * This has been approximated as 8ms total.
+		 */
+		regulator-enable-ramp-delay = <8000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* Always on; plain and simple */
+	pp3000_ap: pp3000_emmc: pp3000 {
+	};
+
+	pp1500_ap_io: pp1500-ap-io {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1500_ap_io";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1500_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	pp3300_disp: pp3300-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_disp";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_disp_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+
+		startup-delay-us = <2000>;
+		vin-supply = <&pp3300>;
+	};
+
+	/* EC turns on w/ pp3300_usb_en_l */
+	pp3300_usb: pp3300 {
+	};
+
+	/* gpio is shared with pp1800_pcie and pinctrl is set there */
+	pp3300_wifi_bt: pp3300-wifi-bt {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wifi_bt";
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp3300>;
+	};
+
+	/*
+	 * This is a bit of a hack. The WiFi module should be reset at least
+	 * 1ms after its regulators have ramped up (max rampup time is ~7ms).
+	 * With some stretching of the imagination, we can call the 1.8V
+	 * regulator a supply.
+	 */
+	wlan_pd_n: wlan-pd-n {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_pd_n";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_reset_l>;
+
+		enable-active-high;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp1800_pcie>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		power-supply = <&pp3300_disp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>;
+
+		wake_on_bt: key-wake-on-bt {
+			label = "Wake-on-Bluetooth";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&ppvar_bigcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_litcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_gpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&cdn_dp {
+	extcon = <&usbc_extcon0>, <&usbc_extcon1>;
+};
+
+&dmc {
+	center-supply = <&ppvar_centerlogic>;
+	rockchip,pd-idle-dis-freq-hz = <800000000>;
+	rockchip,sr-idle-dis-freq-hz = <800000000>;
+	rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>;
+};
+
+&edp {
+	status = "okay";
+
+	/*
+	 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
+	 * set this here, because rk3399-gru.dtsi ensures we can generate this
+	 * off GPLL=600MHz, whereas some other RK3399 boards may not.
+	 */
+	assigned-clocks = <&cru PCLK_EDP>;
+	assigned-clock-rates = <24000000>;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A 0-7 */
+			  "AP_RTC_CLK_IN",
+			  "EC_AP_INT_L",
+			  "PP1800_AUDIO_EN",
+			  "BT_HOST_WAKE_L",
+			  "WLAN_MODULE_PD_L",
+			  "H1_INT_OD_L",
+			  "CENTERLOGIC_DVS_PWM",
+			  "",
+
+			  /* GPIO0 B 0-4 */
+			  "WIFI_HOST_WAKE_L",
+			  "PMUIO2_33_18_L",
+			  "PP1500_EN",
+			  "AP_EC_WARM_RESET_REQ",
+			  "PP3000_EN";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A 0-7 */
+			  "",
+			  "",
+			  "SPK_PA_EN",
+			  "",
+			  "TRACKPAD_INT_L",
+			  "AP_EC_S3_S0_L",
+			  "AP_EC_OVERTEMP",
+			  "AP_SPI_FLASH_MISO",
+
+			  /* GPIO1 B 0-7 */
+			  "AP_SPI_FLASH_MOSI_R",
+			  "AP_SPI_FLASH_CLK_R",
+			  "AP_SPI_FLASH_CS_L_R",
+			  "WLAN_MODULE_RESET_L",
+			  "WIFI_DISABLE_L",
+			  "MIC_INT",
+			  "",
+			  "AP_I2C_DVS_SDA",
+
+			  /* GPIO1 C 0-7 */
+			  "AP_I2C_DVS_SCL",
+			  "AP_BL_EN",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics call it
+			   * AP_FW_WP or CPU1_FW_WP, depending on the variant.
+			   */
+			  "AP_FLASH_WP",
+			  "LITCPU_DVS_PWM",
+			  "AP_I2C_AUDIO_SDA",
+			  "AP_I2C_AUDIO_SCL",
+			  "",
+			  "HEADSET_INT_L";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A 0-7 */
+			  "",
+			  "",
+			  "SD_IO_PWR_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO2 B 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO2 C 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SPI_EC_MISO",
+			  "AP_SPI_EC_MOSI",
+			  "AP_SPI_EC_CLK",
+			  "AP_SPI_EC_CS_L",
+
+			  /* GPIO2 D 0-4 */
+			  "BT_DEV_WAKE_L",
+			  "",
+			  "WIFI_PCIE_CLKREQ_L",
+			  "WIFI_PERST_L",
+			  "SD_PWR_3000_1800_L";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SPI_TPM_MISO",
+			  "AP_SPI_TPM_MOSI_R",
+			  "AP_SPI_TPM_CLK_R",
+			  "AP_SPI_TPM_CS_L_R",
+
+			  /* GPIO3 B 0-7 */
+			  "EC_IN_RW",
+			  "",
+			  "AP_I2C_TP_SDA",
+			  "AP_I2C_TP_SCL",
+			  "AP_I2C_TP_PU_EN",
+			  "TOUCH_INT_L",
+			  "",
+			  "",
+
+			  /* GPIO3 C 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO3 D 0-7 */
+			  "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI_0",
+			  "I2S0_SDI_1",
+			  "",
+			  "I2S0_SDO_1",
+			  "I2S0_SDO_0";
+};
+
+&gpio4 {
+	gpio-line-names = /* GPIO4 A 0-7 */
+			  "I2S_MCLK",
+			  "AP_I2C_MIC_SDA",
+			  "AP_I2C_MIC_SCL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO4 B 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO4 C 0-7 */
+			  "AP_I2C_TS_SDA",
+			  "AP_I2C_TS_SCL",
+			  "GPU_DVS_PWM",
+			  "UART_DBG_TX_AP_RX",
+			  "UART_AP_TX_DBG_RX",
+			  "",
+			  "BIGCPU_DVS_PWM",
+			  "EDP_HPD_3V0",
+
+			  /* GPIO4 D 0-5 */
+			  "SD_CARD_DET_L",
+			  "USB_DP_HPD",
+			  "TOUCH_RESET_L",
+			  "PP3300_DISP_EN",
+			  "",
+			  "SD_SLOT_PWR_EN";
+};
+
+ap_i2c_mic: &i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	headsetcodec: rt5514@57 {
+		compatible = "realtek,rt5514";
+		reg = <0x57>;
+		realtek,dmic-init-delay-ms = <20>;
+	};
+};
+
+ap_i2c_tp: &i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	/*
+	 * Note strange pullup enable.  Apparently this avoids leakage but
+	 * still allows us to get nice 4.7K pullups for high speed i2c
+	 * transfers.  Basically we want the pullup on whenever the ap is
+	 * alive, so the "en" pin just gets set to output high.
+	 */
+	pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
+};
+
+&cros_ec {
+	cros_ec_pwm: pwm {
+		compatible = "google,cros-ec-pwm";
+		#pwm-cells = <1>;
+	};
+
+	usbc_extcon1: extcon1 {
+		compatible = "google,extcon-usbc-cros-ec";
+		google,usb-port-id = <1>;
+	};
+};
+
+&sound {
+	rockchip,codec = <&max98357a &headsetcodec
+			  &codec &wacky_spi_audio &cdn_dp>;
+};
+
+&spi2 {
+	wacky_spi_audio: spi2@0 {
+		compatible = "realtek,rt5514";
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_int>;
+		/* May run faster once verified. */
+		spi-max-frequency = <10000000>;
+		wakeup-source;
+	};
+};
+
+&pci_rootport {
+	mvl_wifi: wifi@0,0 {
+		compatible = "pci1b4b,2b42";
+		reg = <0x0000 0x0 0x0 0x0 0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_host_wake_l>;
+		wakeup-source;
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&pinctrl {
+	discrete-regulators {
+		pp1500_en: pp1500-en {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp1800_audio_en: pp1800-audio-en {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+
+		pp3000_en: pp3000-en {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp3300_disp_en: pp3300-disp-en {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		wlan_module_pd_l: wlan-module-pd-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+	};
+};
+
+&wifi {
+	wifi_perst_l: wifi-perst-l {
+		rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	wlan_host_wake_l: wlan-host-wake-l {
+		/* Kevin has an external pull up, but Bob does not */
+		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
new file mode 100644
index 0000000000..2cc9b3386c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Kevin Rev 6+ board device tree source
+ *
+ * Copyright 2016-2017 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3399-gru-chromebook.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/*
+ * Kevin-specific things
+ *
+ * Things in this section should use names from Kevin schematic since no
+ * equivalent exists in Gru schematic.  If referring to signals that exist
+ * in Gru we use the Gru names, though.  Confusing enough for you?
+ */
+/ {
+	model = "Google Kevin";
+	compatible = "google,kevin-rev15", "google,kevin-rev14",
+		     "google,kevin-rev13", "google,kevin-rev12",
+		     "google,kevin-rev11", "google,kevin-rev10",
+		     "google,kevin-rev9", "google,kevin-rev8",
+		     "google,kevin-rev7", "google,kevin-rev6",
+		     "google,kevin", "google,gru", "rockchip,rk3399";
+	chassis-type = "convertible";
+
+	/* Power tree */
+
+	p3_3v_dig: p3-3v-dig {
+		compatible = "regulator-fixed";
+		regulator-name = "p3.3v_dig";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu3_pen_pwr_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "sharp,lq123p1jx31";
+		backlight = <&backlight>;
+		power-supply = <&pp3300_disp>;
+
+		panel-timing {
+			clock-frequency = <266666667>;
+			hactive = <2400>;
+			hfront-porch = <48>;
+			hback-porch = <84>;
+			hsync-len = <32>;
+			hsync-active = <0>;
+			vactive = <1600>;
+			vfront-porch = <3>;
+			vback-porch = <120>;
+			vsync-len = <10>;
+			vsync-active = <0>;
+		};
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <25500>;
+		pulldown-ohm = <0>;
+		io-channels = <&saradc 2>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor_ppvar_litcpu: thermistor-ppvar-litcpu {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <25500>;
+		pulldown-ohm = <0>;
+		io-channels = <&saradc 3>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 1>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
+
+	switch-pen-insert {
+		label = "Pen Insert";
+		/* Insert = low, eject = high */
+		gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		linux,code = <SW_PEN_INSERTED>;
+		linux,input-type = <EV_SW>;
+		wakeup-source;
+	};
+};
+
+&thermal_zones {
+	bigcpu_reg_thermal: bigcpu-reg-thermal {
+		polling-delay-passive = <100>; /* milliseconds */
+		polling-delay = <1000>; /* milliseconds */
+		thermal-sensors = <&thermistor_ppvar_bigcpu 0>;
+		sustainable-power = <4000>;
+
+		ppvar_bigcpu_trips: trips {
+			ppvar_bigcpu_on: ppvar-bigcpu-on {
+				temperature = <40000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_bigcpu_alert: ppvar-bigcpu-alert {
+				temperature = <50000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_bigcpu_crit: ppvar-bigcpu-crit {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <0>;	/* millicelsius */
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&ppvar_bigcpu_alert>;
+				cooling-device =
+					<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <4096>;
+			};
+			map1 {
+				trip = <&ppvar_bigcpu_alert>;
+				cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <1024>;
+			};
+		};
+	};
+
+	litcpu_reg_thermal: litcpu-reg-thermal {
+		polling-delay-passive = <100>; /* milliseconds */
+		polling-delay = <1000>; /* milliseconds */
+		thermal-sensors = <&thermistor_ppvar_litcpu 0>;
+		sustainable-power = <4000>;
+
+		ppvar_litcpu_trips: trips {
+			ppvar_litcpu_on: ppvar-litcpu-on {
+				temperature = <40000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_litcpu_alert: ppvar-litcpu-alert {
+				temperature = <50000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_litcpu_crit: ppvar-litcpu-crit {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <0>;	/* millicelsius */
+				type = "critical";
+			};
+		};
+	};
+};
+
+ap_i2c_tpm: &i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times. */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+ap_i2c_dig: &i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times. */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	digitizer: digitizer@9 {
+		/* wacom,w9013 */
+		compatible = "hid-over-i2c";
+		reg = <0x9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>;
+
+		vdd-supply = <&p3_3v_dig>;
+		post-power-on-delay-ms = <100>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x1>;
+	};
+};
+
+/* Adjustments to things in the gru baseboard */
+
+&ap_i2c_tp {
+	trackpad@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int_l>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED
+				     BTN_LEFT>;
+		wakeup-source;
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ppvar_bigcpu_pwm {
+	regulator-min-microvolt = <798674>;
+	regulator-max-microvolt = <1302172>;
+};
+
+&ppvar_bigcpu {
+	regulator-min-microvolt = <798674>;
+	regulator-max-microvolt = <1302172>;
+	ctrl-voltage-range = <798674 1302172>;
+};
+
+&ppvar_litcpu_pwm {
+	regulator-min-microvolt = <799065>;
+	regulator-max-microvolt = <1303738>;
+};
+
+&ppvar_litcpu {
+	regulator-min-microvolt = <799065>;
+	regulator-max-microvolt = <1303738>;
+	ctrl-voltage-range = <799065 1303738>;
+};
+
+&ppvar_gpu_pwm {
+	regulator-min-microvolt = <785782>;
+	regulator-max-microvolt = <1217729>;
+};
+
+&ppvar_gpu {
+	regulator-min-microvolt = <785782>;
+	regulator-max-microvolt = <1217729>;
+	ctrl-voltage-range = <785782 1217729>;
+};
+
+&ppvar_centerlogic_pwm {
+	regulator-min-microvolt = <800069>;
+	regulator-max-microvolt = <1049692>;
+};
+
+&ppvar_centerlogic {
+	regulator-min-microvolt = <800069>;
+	regulator-max-microvolt = <1049692>;
+	ctrl-voltage-range = <800069 1049692>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&pp1800_ap_io>;
+};
+
+&mvl_wifi {
+	marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */
+};
+
+&pinctrl {
+	digitizer {
+		/* Has external pullup */
+		cpu1_dig_irq_l: cpu1-dig-irq-l {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* Has external pullup */
+		cpu1_dig_pdct_l: cpu1-dig-pdct-l {
+			rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	discrete-regulators {
+		cpu3_pen_pwr_en: cpu3-pen-pwr-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pen {
+		cpu1_pen_eject: cpu1-pen-eject {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
new file mode 100644
index 0000000000..9e4b12ed62
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Scarlet Rev5+ (SKU-0) board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "rk3399-gru-scarlet.dtsi"
+
+/ {
+	model = "Google Scarlet";
+	compatible = "google,scarlet-rev15-sku0", "google,scarlet-rev15",
+		     "google,scarlet-rev14-sku0", "google,scarlet-rev14",
+		     "google,scarlet-rev13-sku0", "google,scarlet-rev13",
+		     "google,scarlet-rev12-sku0", "google,scarlet-rev12",
+		     "google,scarlet-rev11-sku0", "google,scarlet-rev11",
+		     "google,scarlet-rev10-sku0", "google,scarlet-rev10",
+		     "google,scarlet-rev9-sku0",  "google,scarlet-rev9",
+		     "google,scarlet-rev8-sku0",  "google,scarlet-rev8",
+		     "google,scarlet-rev7-sku0",  "google,scarlet-rev7",
+		     "google,scarlet-rev6-sku0",  "google,scarlet-rev6",
+		     "google,scarlet-rev5-sku0",  "google,scarlet-rev5",
+		     "google,scarlet", "google,gru", "rockchip,rk3399";
+};
+
+&mipi_panel {
+	compatible = "innolux,p097pfg";
+	avdd-supply = <&ppvarp_lcd>;
+	avee-supply = <&ppvarn_lcd>;
+};
+
+&pci_rootport {
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0x00000000 0x0 0x00000000 0x0 0x00000000>,
+		      <0x03000010 0x0 0x00000000 0x0 0x00200000>;
+		qcom,ath10k-calibration-variant = "GO_DUMO";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts
new file mode 100644
index 0000000000..5d1879033e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Scarlet Rev4+ (SKU-6/Innolux) board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "rk3399-gru-scarlet.dtsi"
+
+/ {
+	model = "Google Scarlet";
+	compatible = "google,scarlet-rev15-sku2", "google,scarlet-rev15-sku4",
+		     "google,scarlet-rev15-sku6", "google,scarlet-rev15",
+		     "google,scarlet-rev14-sku2", "google,scarlet-rev14-sku4",
+		     "google,scarlet-rev14-sku6", "google,scarlet-rev14",
+		     "google,scarlet-rev13-sku2", "google,scarlet-rev13-sku4",
+		     "google,scarlet-rev13-sku6", "google,scarlet-rev13",
+		     "google,scarlet-rev12-sku2", "google,scarlet-rev12-sku4",
+		     "google,scarlet-rev12-sku6", "google,scarlet-rev12",
+		     "google,scarlet-rev11-sku2", "google,scarlet-rev11-sku4",
+		     "google,scarlet-rev11-sku6", "google,scarlet-rev11",
+		     "google,scarlet-rev10-sku2", "google,scarlet-rev10-sku4",
+		     "google,scarlet-rev10-sku6", "google,scarlet-rev10",
+		     "google,scarlet-rev9-sku2",  "google,scarlet-rev9-sku4",
+		     "google,scarlet-rev9-sku6",  "google,scarlet-rev9",
+		     "google,scarlet-rev8-sku2",  "google,scarlet-rev8-sku4",
+		     "google,scarlet-rev8-sku6",  "google,scarlet-rev8",
+		     "google,scarlet-rev7-sku2",  "google,scarlet-rev7-sku4",
+		     "google,scarlet-rev7-sku6",  "google,scarlet-rev7",
+		     "google,scarlet-rev6-sku2",  "google,scarlet-rev6-sku4",
+		     "google,scarlet-rev6-sku6",  "google,scarlet-rev6",
+		     "google,scarlet-rev5-sku2",  "google,scarlet-rev5-sku4",
+		     "google,scarlet-rev5-sku6",  "google,scarlet-rev5",
+		     "google,scarlet-rev4-sku2",  "google,scarlet-rev4-sku4",
+		     "google,scarlet-rev4-sku6",  "google,scarlet-rev4",
+		     "google,scarlet", "google,gru", "rockchip,rk3399";
+};
+
+&mipi_panel {
+	compatible = "innolux,p097pfg";
+	avdd-supply = <&ppvarp_lcd>;
+	avee-supply = <&ppvarn_lcd>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts
new file mode 100644
index 0000000000..bd75922172
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Scarlet Rev3+ (SKU-7/Kingdisplay) board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "rk3399-gru-scarlet.dtsi"
+
+/ {
+	model = "Google Scarlet";
+	compatible = "google,scarlet-rev15-sku7", "google,scarlet-rev15",
+		     "google,scarlet-rev14-sku7", "google,scarlet-rev14",
+		     "google,scarlet-rev13-sku7", "google,scarlet-rev13",
+		     "google,scarlet-rev12-sku7", "google,scarlet-rev12",
+		     "google,scarlet-rev11-sku7", "google,scarlet-rev11",
+		     "google,scarlet-rev10-sku7", "google,scarlet-rev10",
+		     "google,scarlet-rev9-sku7",  "google,scarlet-rev9",
+		     "google,scarlet-rev8-sku7",  "google,scarlet-rev8",
+		     "google,scarlet-rev7-sku7",  "google,scarlet-rev7",
+		     "google,scarlet-rev6-sku7",  "google,scarlet-rev6",
+		     "google,scarlet-rev5-sku7",  "google,scarlet-rev5",
+		     "google,scarlet-rev4-sku7",  "google,scarlet-rev4",
+		     "google,scarlet-rev3-sku7",  "google,scarlet-rev3",
+		     "google,scarlet", "google,gru", "rockchip,rk3399";
+};
+
+&mipi_panel {
+	compatible = "kingdisplay,kd097d04";
+	power-supply = <&pp3300_s0>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
new file mode 100644
index 0000000000..c5e7de60c1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-scarlet board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#include "rk3399-gru.dtsi"
+
+/{
+	chassis-type = "tablet";
+
+	/* Power tree */
+
+	/* ppvar_sys children, sorted by name */
+	pp1250_s3: pp1250-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1250_s3";
+
+		/* EC turns on w/ pp1250_s3_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1250000>;
+		regulator-max-microvolt = <1250000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1250_cam: pp1250-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1250_dvdd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1250_cam_en>;
+
+		enable-active-high;
+		gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+
+		/* 740us delay from gpio output high to pp1250 stable,
+		 * rounding up to 1ms for safety.
+		 */
+		startup-delay-us = <1000>;
+		vin-supply = <&pp1250_s3>;
+	};
+
+	pp900_s0: pp900-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp900_s0";
+
+		/* EC turns on w/ pp900_s0_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* pp1800 children, sorted by name */
+	pp900_s3: pp900-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp900_s3";
+
+		/* EC turns on w/ pp900_s3_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* EC turns on pp1800_s3_en */
+	pp1800_s3: pp1800 {
+	};
+
+	/* pp3300 children, sorted by name */
+	pp2800_cam: pp2800-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_avdd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp2800_cam_en>;
+
+		enable-active-high;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		vin-supply = <&pp3300>;
+	};
+
+	/* EC turns on pp3300_s0_en */
+	pp3300_s0: pp3300 {
+	};
+
+	/* EC turns on pp3300_s3_en */
+	pp3300_s3: pp3300 {
+	};
+
+	/*
+	 * See b/66922012
+	 *
+	 * This is a hack to make sure the Bluetooth part of the QCA6174A
+	 * is reset at boot by toggling BT_EN. At boot BT_EN is first set
+	 * to low when the bt_3v3 regulator is registered (in disabled
+	 * state). The fake regulator is configured as a supply of the
+	 * wlan_3v3 regulator below. When wlan_3v3 is enabled early in
+	 * the boot process it also enables its supply regulator bt_3v3,
+	 * which changes BT_EN to high.
+	 */
+	bt_3v3: bt-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "bt_3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_1v8_l>;
+
+		enable-active-high;
+		gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_s3>;
+	};
+
+	wlan_3v3: wlan-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pd_1v8_l>;
+
+		/*
+		 * The WL_EN pin is driven low when the regulator is
+		 * registered, and transitions to high when the PCIe bus
+		 * is powered up.
+		 */
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		/*
+		 * Require minimum 10ms from power-on (e.g., PD#) to init PCIe.
+		 * TODO (b/64444991): how long to assert PD#?
+		 */
+		regulator-enable-ramp-delay = <10000>;
+		/* See bt_3v3 hack above */
+		vin-supply = <&bt_3v3>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm1 0 1000000 0>;
+	};
+
+	dmic: dmic {
+		compatible = "dmic-codec";
+		dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dmic_en>;
+		wakeup-delay-ms = <250>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_eject_odl>;
+
+		switch-pen-insert {
+			label = "Pen Insert";
+			/* Insert = low, eject = high */
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+};
+
+/* pp900_s0 aliases */
+pp900_ddrpll_ap: &pp900_s0 {
+};
+pp900_pcie: &pp900_s0 {
+};
+pp900_usb: &pp900_s0 {
+};
+
+/* pp900_s3 aliases */
+pp900_emmcpll: &pp900_s3 {
+};
+
+/* EC turns on; alias for pp1800_s0 */
+pp1800_pcie: &pp1800_s0 {
+};
+
+/* On scarlet PPVAR(big_cpu, lit_cpu, gpu) need to adjust voltage ranges */
+&ppvar_bigcpu {
+	ctrl-voltage-range = <800074 1299226>;
+	regulator-min-microvolt = <800074>;
+	regulator-max-microvolt = <1299226>;
+};
+
+&ppvar_bigcpu_pwm {
+	/* On scarlet ppvar big cpu use pwm3 */
+	pwms = <&pwm3 0 3337 0>;
+	regulator-min-microvolt = <800074>;
+	regulator-max-microvolt = <1299226>;
+};
+
+&ppvar_litcpu {
+	ctrl-voltage-range = <802122 1199620>;
+	regulator-min-microvolt = <802122>;
+	regulator-max-microvolt = <1199620>;
+};
+
+&ppvar_litcpu_pwm {
+	regulator-min-microvolt = <802122>;
+	regulator-max-microvolt = <1199620>;
+};
+
+&ppvar_gpu {
+	ctrl-voltage-range = <799600 1099600>;
+	regulator-min-microvolt = <799600>;
+	regulator-max-microvolt = <1099600>;
+};
+
+&ppvar_gpu_pwm {
+	regulator-min-microvolt = <799600>;
+	regulator-max-microvolt = <1099600>;
+};
+
+&ppvar_sd_card_io {
+	states = <1800000 0x0>, <3300000 0x1>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&pp3000_sd_slot {
+	vin-supply = <&pp3300>;
+};
+
+ap_i2c_dig: &i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times. */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	digitizer: digitizer@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x9>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		hid-descr-addr = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_int_odl &pen_reset_l>;
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l &touch_reset_l>;
+		reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+camera: &i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times; TODO: measure */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	/* 24M mclk is shared between world and user cameras */
+	pinctrl-0 = <&i2c7_xfer &test_clkout1>;
+
+	/* Rear-facing camera */
+	wcam: camera@36 {
+		compatible = "ovti,ov5695";
+		reg = <0x36>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcam_rst>;
+
+		clocks = <&cru SCLK_TESTCLKOUT1>;
+		clock-names = "xvclk";
+
+		avdd-supply = <&pp2800_cam>;
+		dvdd-supply = <&pp1250_cam>;
+		dovdd-supply = <&pp1800_s0>;
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+		port {
+			wcam_out: endpoint {
+				remote-endpoint = <&mipi_in_wcam>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	/* Front-facing camera */
+	ucam: camera@3c {
+		compatible = "ovti,ov2685";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ucam_rst>;
+
+		clocks = <&cru SCLK_TESTCLKOUT1>;
+		clock-names = "xvclk";
+
+		avdd-supply = <&pp2800_cam>;
+		dovdd-supply = <&pp1800_s0>;
+		dvdd-supply = <&pp1800_s0>;
+		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+
+		port {
+			ucam_out: endpoint {
+				remote-endpoint = <&mipi_in_ucam>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
+
+&cdn_dp {
+	extcon = <&usbc_extcon0>;
+	phys = <&tcphy0_dp>;
+};
+
+&cpu_alert0 {
+	temperature = <66000>;
+};
+
+&cpu_alert1 {
+	temperature = <71000>;
+};
+
+&cros_ec {
+	interrupt-parent = <&gpio1>;
+	interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&cru {
+	assigned-clocks =
+		<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+		<&cru PLL_NPLL>,
+		<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+		<&cru PCLK_PERIHP>,
+		<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+		<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+		<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+		<&cru ACLK_VIO>,
+		<&cru ACLK_GIC_PRE>,
+		<&cru PCLK_DDR>,
+		<&cru ACLK_HDCP>,
+		<&cru ACLK_VDU>;
+	assigned-clock-rates =
+		<600000000>, <1600000000>,
+		<1000000000>,
+		<150000000>, <75000000>,
+		<37500000>,
+		<100000000>, <100000000>,
+		<50000000>, <800000000>,
+		<100000000>, <50000000>,
+		<400000000>,
+		<200000000>,
+		<200000000>,
+		<400000000>,
+		<400000000>;
+};
+
+/* The center supply is fixed to .9V on scarlet */
+&dmc {
+	center-supply = <&pp900_s0>;
+};
+
+/* We don't need .925 V for 928 MHz on scarlet */
+&dmc_opp_table {
+	opp03 {
+		opp-microvolt = <900000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A 0-7 */
+			  "CLK_32K_AP",
+			  "EC_IN_RW_OD",
+			  "SPK_PA_EN",
+			  "WLAN_PERST_1V8_L",
+			  "WLAN_PD_1V8_L",
+			  "WLAN_RF_KILL_1V8_L",
+			  "BIGCPU_DVS_PWM",
+			  "SD_CD_L_JTAG_EN",
+
+			  /* GPIO0 B 0-5 */
+			  "BT_EN_BT_RF_KILL_1V8_L",
+			  "PMUIO2_33_18_L_PP3300_S0_EN",
+			  "TOUCH_RESET_L",
+			  "AP_EC_WARM_RESET_REQ",
+			  "PEN_RESET_L",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics call
+			   * it AP_FLASH_WP_R_ODL.
+			   */
+			  "AP_FLASH_WP_L";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A 0-7 */
+			  "PEN_INT_ODL",
+			  "PEN_EJECT_ODL",
+			  "BT_HOST_WAKE_1V8_L",
+			  "WLAN_HOST_WAKE_1V8_L",
+			  "TOUCH_INT_ODL",
+			  "AP_EC_S3_S0_L",
+			  "AP_EC_OVERTEMP",
+			  "AP_SPI_FLASH_MISO",
+
+			  /* GPIO1 B 0-7 */
+			  "AP_SPI_FLASH_MOSI_R",
+			  "AP_SPI_FLASH_CLK_R",
+			  "AP_SPI_FLASH_CS_L_R",
+			  "SD_CARD_DET_ODL",
+			  "",
+			  "AP_EXPANSION_IO1",
+			  "AP_EXPANSION_IO2",
+			  "AP_I2C_DISP_SDA",
+
+			  /* GPIO1 C 0-7 */
+			  "AP_I2C_DISP_SCL",
+			  "H1_INT_ODL",
+			  "EC_AP_INT_ODL",
+			  "LITCPU_DVS_PWM",
+			  "AP_I2C_AUDIO_SDA",
+			  "AP_I2C_AUDIO_SCL",
+			  "AP_EXPANSION_IO3",
+			  "HEADSET_INT_ODL",
+
+			  /* GPIO1 D0 */
+			  "AP_EXPANSION_IO4";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A 0-7 */
+			  "AP_I2C_PEN_SDA",
+			  "AP_I2C_PEN_SCL",
+			  "SD_IO_PWR_EN",
+			  "UCAM_RST_L",
+			  "PP1250_CAM_EN",
+			  "WCAM_RST_L",
+			  "AP_EXPANSION_IO5",
+			  "AP_I2C_CAM_SDA",
+
+			  /* GPIO2 B 0-7 */
+			  "AP_I2C_CAM_SCL",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO2 C 0-7 */
+			  "UART_EXPANSION_TX_AP_RX",
+			  "UART_AP_TX_EXPANSION_RX",
+			  "UART_EXPANSION_RTS_AP_CTS",
+			  "UART_AP_RTS_EXPANSION_CTS",
+			  "AP_SPI_EC_MISO",
+			  "AP_SPI_EC_MOSI",
+			  "AP_SPI_EC_CLK",
+			  "AP_SPI_EC_CS_L",
+
+			  /* GPIO2 D 0-4 */
+			  "PP2800_CAM_EN",
+			  "CLK_24M_CAM",
+			  "WLAN_PCIE_CLKREQ_1V8_L",
+			  "",
+			  "SD_PWR_3000_1800_L";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO3 B 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO3 C 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO3 D 0-7 */
+			  "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI_0",
+			  "STRAP_LCDBIAS_L",
+			  "STRAP_FEATURE_1",
+			  "STRAP_FEATURE_2",
+			  "I2S0_SDO_0";
+};
+
+&gpio4 {
+	gpio-line-names = /* GPIO4 A 0-7 */
+			  "I2S_MCLK",
+			  "AP_I2C_EXPANSION_SDA",
+			  "AP_I2C_EXPANSION_SCL",
+			  "DMIC_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO4 B 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO4 C 0-7 */
+			  "AP_I2C_TS_SDA",
+			  "AP_I2C_TS_SCL",
+			  "GPU_DVS_PWM",
+			  "UART_DBG_TX_AP_RX",
+			  "UART_AP_TX_DBG_RX",
+			  "BL_EN",
+			  "BL_PWM",
+			  "",
+
+			  /* GPIO4 D 0-5 */
+			  "",
+			  "DISPLAY_RST_L",
+			  "",
+			  "PPVARP_LCD_EN",
+			  "PPVARN_LCD_EN",
+			  "SD_SLOT_PWR_EN";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&io_domains {
+	bt656-supply = <&pp1800_s0>;		/* APIO2_VDD;  2a 2b */
+	audio-supply = <&pp1800_s0>;		/* APIO5_VDD;  3d 4a */
+	gpio1830-supply = <&pp1800_s0>;		/* APIO4_VDD;  4c 4d */
+};
+
+&isp0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_in_wcam: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&wcam_out>;
+				data-lanes = <1 2>;
+			};
+
+			mipi_in_ucam: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ucam_out>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
+
+&isp0_mmu {
+	status = "okay";
+};
+
+&max98357a {
+	sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+};
+
+&mipi_dphy_rx0 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+	clock-master;
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	mipi_panel: panel@0 {
+		/* 2 different panels are used, compatibles are in dts files */
+		reg = <0>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_rst_l>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				mipi1_in_panel: endpoint@1 {
+					remote-endpoint = <&mipi1_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&mipi_dsi1 {
+	status = "okay";
+
+	ports {
+		mipi1_out: port@1 {
+			reg = <1>;
+
+			mipi1_out_panel: endpoint {
+				remote-endpoint = <&mipi1_in_panel>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+
+	/* PERST# asserted in S3 */
+	pcie-reset-suspend = <1>;
+
+	vpcie3v3-supply = <&wlan_3v3>;
+	vpcie1v8-supply = <&pp1800_pcie>;
+};
+
+&sdmmc {
+	cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	rockchip,codec = <&max98357a &dmic &codec &cdn_dp>;
+};
+
+&spi2 {
+	status = "okay";
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_int_od_l>;
+		spi-max-frequency = <800000>;
+	};
+};
+
+&usb_host0_ohci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	qca_bt: bluetooth@1 {
+		compatible = "usbcf3,e300", "usb4ca,301a";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "wakeup";
+	};
+};
+
+/* PINCTRL OVERRIDES */
+&ap_fw_wp {
+	rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&bl_en {
+	rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&bt_host_wake_l {
+	rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&ec_ap_int_l {
+	rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&headset_int_l {
+	rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&i2s0_8ch_bus {
+	rockchip,pins =
+		<3 RK_PD0 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD1 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD2 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD3 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD7 1 &pcfg_pull_none_6ma>,
+		<4 RK_PA0 1 &pcfg_pull_none_6ma>;
+};
+
+&i2s0_8ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none_6ma>,
+		<3 RK_PD1 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD2 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD3 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD7 1 &pcfg_pull_none_6ma>,
+		<4 RK_PA0 1 &pcfg_pull_none_6ma>;
+};
+
+/* there is no external pull up, so need to set this pin pull up */
+&sdmmc_cd_pin {
+	rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&sd_pwr_1800_sel {
+	rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&sdmode_en {
+	rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
+};
+
+&touch_reset_l {
+	rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+};
+
+&touch_int_l {
+	rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+};
+
+&pinctrl {
+	pinctrl-0 = <
+		&ap_pwroff	/* AP will auto-assert this when in S3 */
+		&clk_32k	/* This pin is always 32k on gru boards */
+		&wlan_rf_kill_1v8_l
+	>;
+
+	pcfg_pull_none_6ma: pcfg-pull-none-6ma {
+		bias-disable;
+		drive-strength = <6>;
+	};
+
+	camera {
+		pp1250_cam_en: pp1250-dvdd {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pp2800_cam_en: pp2800-avdd {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		ucam_rst: ucam_rst {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wcam_rst: wcam_rst {
+			rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	digitizer {
+		pen_int_odl: pen-int-odl {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pen_reset_l: pen-reset-l {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	discrete-regulators {
+		display_rst_l: display-rst-l {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		ppvarp_lcd_en: ppvarp-lcd-en {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		ppvarn_lcd_en: ppvarn-lcd-en {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	dmic {
+		dmic_en: dmic-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pen {
+		pen_eject_odl: pen-eject-odl {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	tpm {
+		h1_int_od_l: h1-int-od-l {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&wifi {
+	bt_en_1v8_l: bt-en-1v8-l {
+		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	wlan_pd_1v8_l: wlan-pd-1v8-l {
+		rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	/* Default pull-up, but just to be clear */
+	wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l {
+		rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+	};
+
+	wifi_perst_l: wifi-perst-l {
+		rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	wlan_host_wake_l: wlan-host-wake-l {
+		rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
new file mode 100644
index 0000000000..789fd0dcc8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -0,0 +1,865 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru (and derivatives) board device tree source
+ *
+ * Copyright 2016-2017 Google, Inc
+ */
+
+#include <dt-bindings/input/input.h>
+#include "rk3399.dtsi"
+#include "rk3399-op1-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	/*
+	 * Power Tree
+	 *
+	 * In general an attempt is made to include all rails called out by
+	 * the schematic as long as those rails interact in some way with
+	 * the AP.  AKA:
+	 * - Rails that only connect to the EC (or devices that the EC talks to)
+	 *   are not included.
+	 * - Rails _are_ included if the rails go to the AP even if the AP
+	 *   doesn't currently care about them / they are always on.  The idea
+	 *   here is that it makes it easier to map to the schematic or extend
+	 *   later.
+	 *
+	 * If two rails are substantially the same from the AP's point of
+	 * view, though, we won't create a full fixed regulator.  We'll just
+	 * put the child rail as an alias of the parent rail.  Sometimes rails
+	 * look the same to the AP because one of these is true:
+	 * - The EC controls the enable and the EC always enables a rail as
+	 *   long as the AP is running.
+	 * - The rails are actually connected to each other by a jumper and
+	 *   the distinction is just there to add clarity/flexibility to the
+	 *   schematic.
+	 */
+
+	ppvar_sys: ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pp1200_lpddr: pp1200-lpddr {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1200_lpddr";
+
+		/* EC turns on w/ lpddr_pwr_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800: pp1800 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800";
+
+		/* Always on when ppvar_sys shows power good */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300: pp3300 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300";
+
+		/* Always on; plain and simple */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000: pp5000 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000";
+
+		/* EC turns on w/ pp5000_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvar_bigcpu_pwm: ppvar-bigcpu-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_bigcpu_pwm";
+
+		pwms = <&pwm1 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ap_core_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800107>;
+		regulator-max-microvolt = <1302232>;
+	};
+
+	ppvar_bigcpu: ppvar-bigcpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_bigcpu";
+
+		regulator-min-microvolt = <800107>;
+		regulator-max-microvolt = <1302232>;
+
+		ctrl-supply = <&ppvar_bigcpu_pwm>;
+		ctrl-voltage-range = <800107 1302232>;
+
+		regulator-settling-time-up-us = <322>;
+	};
+
+	ppvar_litcpu_pwm: ppvar-litcpu-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_litcpu_pwm";
+
+		pwms = <&pwm2 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ap_core_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <797743>;
+		regulator-max-microvolt = <1307837>;
+	};
+
+	ppvar_litcpu: ppvar-litcpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_litcpu";
+
+		regulator-min-microvolt = <797743>;
+		regulator-max-microvolt = <1307837>;
+
+		ctrl-supply = <&ppvar_litcpu_pwm>;
+		ctrl-voltage-range = <797743 1307837>;
+
+		regulator-settling-time-up-us = <384>;
+	};
+
+	ppvar_gpu_pwm: ppvar-gpu-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_gpu_pwm";
+
+		pwms = <&pwm0 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ap_core_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <786384>;
+		regulator-max-microvolt = <1217747>;
+	};
+
+	ppvar_gpu: ppvar-gpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_gpu";
+
+		regulator-min-microvolt = <786384>;
+		regulator-max-microvolt = <1217747>;
+
+		ctrl-supply = <&ppvar_gpu_pwm>;
+		ctrl-voltage-range = <786384 1217747>;
+
+		regulator-settling-time-up-us = <390>;
+	};
+
+	/* EC turns on w/ pp900_ddrpll_en */
+	pp900_ddrpll: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pll_en */
+	pp900_pll: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pmu_en */
+	pp900_pmu: pp900-ap {
+	};
+
+	/* EC turns on w/ pp1800_s0_en_l */
+	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_avdd_en_l */
+	pp1800_avdd: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_lid_en_l */
+	pp1800_lid: pp1800_mic: pp1800 {
+	};
+
+	/* EC turns on w/ lpddr_pwr_en */
+	pp1800_lpddr: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_pmu_en_l */
+	pp1800_pmu: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_usb_en_l */
+	pp1800_usb: pp1800 {
+	};
+
+	pp3000_sd_slot: pp3000-sd-slot {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3000_sd_slot";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_slot_pwr_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp3000>;
+	};
+
+	/*
+	 * Technically, this is a small abuse of 'regulator-gpio'; this
+	 * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are
+	 * always on though, so it is sufficient to simply control the mux
+	 * here.
+	 */
+	ppvar_sd_card_io: ppvar-sd-card-io {
+		compatible = "regulator-gpio";
+		regulator-name = "ppvar_sd_card_io";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
+
+		enable-active-high;
+		enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3000000 0x0>;
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	/* EC turns on w/ pp3300_trackpad_en_l */
+	pp3300_trackpad: pp3300-trackpad {
+	};
+
+	/* EC turns on w/ usb_a_en */
+	pp5000_usb_a_vbus: pp5000 {
+	};
+
+	ap_rtc_clk: ap-rtc-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		#clock-cells = <0>;
+	};
+
+	max98357a: max98357a {
+		compatible = "maxim,max98357a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmode_en>;
+		sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		sdmode-delay = <2>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+	};
+
+	sound: sound {
+		compatible = "rockchip,rk3399-gru-sound";
+		rockchip,cpu = <&i2s0 &spdif>;
+	};
+};
+
+&cdn_dp {
+	status = "okay";
+};
+
+/*
+ * Set some suspend operating points to avoid OVP in suspend
+ *
+ * When we go into S3 ARM Trusted Firmware will transition our PWM regulators
+ * from wherever they're at back to the "default" operating point (whatever
+ * voltage we get when we set the PWM pins to "input").
+ *
+ * This quick transition under light load has the possibility to trigger the
+ * regulator "over voltage protection" (OVP).
+ *
+ * To make extra certain that we don't hit this OVP at suspend time, we'll
+ * transition to a voltage that's much closer to the default (~1.0 V) so that
+ * there will not be a big jump.  Technically we only need to get within 200 mV
+ * of the default voltage, but the speed here should be fast enough and we need
+ * suspend/resume to be rock solid.
+ */
+
+&cluster0_opp {
+	opp05 {
+		opp-suspend;
+	};
+};
+
+&cluster1_opp {
+	opp06 {
+		opp-suspend;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&ppvar_bigcpu>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&ppvar_bigcpu>;
+};
+
+
+&cru {
+	assigned-clocks =
+		<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+		<&cru PLL_NPLL>,
+		<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+		<&cru PCLK_PERIHP>,
+		<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+		<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+		<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+		<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
+		<&cru ACLK_GIC_PRE>,
+		<&cru PCLK_DDR>;
+	assigned-clock-rates =
+		<600000000>, <800000000>,
+		<1000000000>,
+		<150000000>, <75000000>,
+		<37500000>,
+		<100000000>, <100000000>,
+		<50000000>, <800000000>,
+		<100000000>, <50000000>,
+		<400000000>, <400000000>,
+		<200000000>,
+		<200000000>;
+};
+
+&dfi {
+	status = "okay";
+};
+
+&dmc {
+	status = "okay";
+
+	rockchip,pd-idle-ns = <160>;
+	rockchip,sr-idle-ns = <10240>;
+	rockchip,sr-mc-gate-idle-ns = <40960>;
+	rockchip,srpd-lite-idle-ns = <61440>;
+	rockchip,standby-idle-ns = <81920>;
+
+	rockchip,ddr3_odt_dis_freq = <666000000>;
+	rockchip,lpddr3_odt_dis_freq = <666000000>;
+	rockchip,lpddr4_odt_dis_freq = <666000000>;
+
+	rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
+	rockchip,srpd-lite-idle-dis-freq-hz = <0>;
+	rockchip,standby-idle-dis-freq-hz = <928000000>;
+};
+
+&dmc_opp_table {
+	opp03 {
+		opp-suspend;
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&ppvar_gpu>;
+	status = "okay";
+};
+
+ap_i2c_ts: &i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+};
+
+ap_i2c_audio: &i2c8 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	codec: da7219@1a {
+		compatible = "dlg,da7219";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		dlg,micbias-lvl = <2600>;
+		dlg,mic-amp-in-sel = "diff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&headset_int_l>;
+		VDD-supply = <&pp1800>;
+		VDDMIC-supply = <&pp3300>;
+		VDDIO-supply = <&pp1800>;
+
+		da7219_aad {
+			dlg,adc-1bit-rpt = <1>;
+			dlg,btn-avg = <4>;
+			dlg,btn-cfg = <50>;
+			dlg,mic-det-thr = <500>;
+			dlg,jack-ins-deb = <20>;
+			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-rem-deb = <1>;
+
+			dlg,a-d-btn-thr = <0xa>;
+			dlg,d-b-btn-thr = <0x16>;
+			dlg,b-c-btn-thr = <0x21>;
+			dlg,c-mic-btn-thr = <0x3E>;
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&pp1800_audio>;		/* APIO5_VDD;  3d 4a */
+	bt656-supply = <&pp1800_ap_io>;		/* APIO2_VDD;  2a 2b */
+	gpio1830-supply = <&pp3000_ap>;		/* APIO4_VDD;  4c 4d */
+	sdmmc-supply = <&ppvar_sd_card_io>;	/* SDMMC0_VDD; 4b    */
+};
+
+&pcie0 {
+	status = "okay";
+
+	ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>;
+	vpcie3v3-supply = <&pp3300_wifi_bt>;
+	vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */
+	vpcie0v9-supply = <&pp900_pcie>;
+
+	pci_rootport: pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmu1830-supply = <&pp1800_pmu>;		/* PMUIO2_VDD */
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdhci {
+	/*
+	 * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
+	 * same (or nearly the same) performance for all eMMC that are intended
+	 * to be used.
+	 */
+	assigned-clock-rates = <150000000>;
+
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+
+	/*
+	 * Note: configure "sdmmc_cd" as card detect even though it's actually
+	 * hooked to ground.  Because we specified "cd-gpios" below dw_mmc
+	 * should be ignoring card detect anyway.  Specifying the pin as
+	 * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag)
+	 * turned on that the system will still make sure the port is
+	 * configured as SDMMC and not JTAG.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin
+		     &sdmmc_bus4>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&pp3000_sd_slot>;
+	vqmmc-supply = <&ppvar_sd_card_io>;
+};
+
+&spdif {
+	status = "okay";
+
+	/*
+	 * SPDIF is routed internally to DP; we either don't use these pins, or
+	 * mux them to something else.
+	 */
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+};
+
+&spi1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&spi1_sleep>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		/* May run faster once verified. */
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int_l>;
+		spi-max-frequency = <3000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbc_extcon0: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
+&tcphy0 {
+	status = "okay";
+	extcon = <&usbc_extcon0>;
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "okay";
+};
+
+&u2phy1_host {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+	extcon = <&usbc_extcon0>;
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&pinctrl {
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 *
+	 * At the moment settings are identical for S0 and S3, but if we later
+	 * need to configure things differently for S3 we'll adjust here.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&ap_pwroff	/* AP will auto-assert this when in S3 */
+		&clk_32k	/* This pin is always 32k on gru boards */
+	>;
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	backlight-enable {
+		bl_en: bl-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cros-ec {
+		ec_ap_int_l: ec-ap-int-l {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	discrete-regulators {
+		sd_io_pwr_en: sd-io-pwr-en {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		sd_pwr_1800_sel: sd-pwr-1800-sel {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		sd_slot_pwr_en: sd-slot-pwr-en {
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+	};
+
+	codec {
+		/* Has external pullup */
+		headset_int_l: headset-int-l {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		mic_int: mic-int {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	max98357a {
+		sdmode_en: sdmode-en {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	pcie {
+		pcie_clkreqn_cpm: pci-clkreqn-cpm {
+			/*
+			 * Since our pcie doesn't support ClockPM(CPM), we want
+			 * to hack this as gpio, so the EP could be able to
+			 * de-assert it along and make ClockPM(CPM) work.
+			 */
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * We run sdmmc at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<4 RK_PB0 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB1 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB2 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB3 1 &pcfg_pull_none_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				<4 RK_PB4 1 &pcfg_pull_none_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				<4 RK_PB5 1 &pcfg_pull_none_8ma>;
+		};
+
+		/*
+		 * In our case the official card detect is hooked to ground
+		 * to avoid getting access to JTAG just by sticking something
+		 * in the SD card slot (see the force_jtag bit in the TRM).
+		 *
+		 * We still configure it as card detect because it doesn't
+		 * hurt and dw_mmc will ignore it.  We make sure to disable
+		 * the pull though so we don't burn needless power.
+		 */
+		sdmmc_cd: sdmmc-cd {
+			rockchip,pins =
+				<0 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/* This is where we actually hook up CD; has external pull */
+		sdmmc_cd_pin: sdmmc-cd-pin {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	spi1 {
+		spi1_sleep: spi1-sleep {
+			/*
+			 * Pull down SPI1 CLK/CS/RX/TX during suspend, to
+			 * prevent leakage.
+			 */
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	touchscreen {
+		touch_int_l: touch-int-l {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		touch_reset_l: touch-reset-l {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	trackpad {
+		ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		trackpad_int_l: trackpad-int-l {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi: wifi {
+		wlan_module_reset_l: wlan-module-reset-l {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			/* Kevin has an external pull up, but Gru does not */
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	write-protect {
+		ap_fw_wp: ap-fw-wp {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
new file mode 100644
index 0000000000..7af27e8216
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -0,0 +1,764 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Hugsun X99 TV BOX";
+	compatible = "hugsun,x99", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_5v: dc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_led_pin>;
+
+		power_led: led-0 {
+			label = "blue:power";
+			gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&dc_5v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc1v8_s0: vcc1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&vdd_gpu>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	clock-frequency = <400000>;
+
+	vdd_cpu_b: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+		regulator-initial-mode = <1>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rtc_clko_wifi";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v0_sd: LDO_REG5 {
+				regulator-name = "vcc3v0_sd";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <40>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+	audio-supply = <&vcc1v8_s0>;
+	bt656-supply = <&vcc1v8_s0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sd>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pinctrl {
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins =
+				<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gmac {
+		rgmii_sleep_pins: rgmii-sleep-pins {
+			rockchip,pins =
+				<3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	ir {
+		ir_rx: ir-rx {
+			rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led_pin: power-led-pin {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins =
+				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins =
+				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio {
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			/* external pullup to VCC1V8_PMUPLL */
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_reg_on_h: wifi-reg_on-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+	pinctrl-0 = <&pwm2_pin_pull_down>;
+};
+
+&saradc {
+	vref-supply = <&vcc1v8_s0>;
+	status = "okay";
+};
+
+&sdmmc {
+	clock-frequency = <150000000>;
+	max-frequency = <150000000>;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vqmmc-supply = <&vcc_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	card-detect-delay = <800>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&spdif {
+	status = "okay";
+	pinctrl-0 = <&spdif_bus_1>;
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	rockchip,hw-tshut-temp = <110000>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
new file mode 100644
index 0000000000..8302e51def
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+	model = "Khadas Edge-Captain";
+	compatible = "khadas,edge-captain", "rockchip,rk3399";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
new file mode 100644
index 0000000000..f5dcb99dc3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+	model = "Khadas Edge-V";
+	compatible = "khadas,edge-v", "rockchip,rk3399";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts
new file mode 100644
index 0000000000..31616e7ad8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+	model = "Khadas Edge";
+	compatible = "khadas,edge", "rockchip,rk3399";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
new file mode 100644
index 0000000000..9d9297bc5f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vsys_5v0>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vsys_3v3>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+
+	vsys: vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: vsys-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys>;
+	};
+
+	vsys_5v0: vsys-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vsys>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-khadas";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
+
+		sys_led: led-0 {
+			label = "sys_led";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		user_led: led-1 {
+			label = "user_led";
+			default-state = "off";
+			gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 150 200 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vsys_5v0>;
+		pwms = <&pwm0 0 40000 0>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&gpu_thermal {
+	trips {
+		gpu_warm: gpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		gpu_hot: gpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&gpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map2 {
+			trip = <&gpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vsys_3v3>;
+		vcc2-supply = <&vsys_3v3>;
+		vcc3-supply = <&vsys_3v3>;
+		vcc4-supply = <&vsys_3v3>;
+		vcc6-supply = <&vsys_3v3>;
+		vcc7-supply = <&vsys_3v3>;
+		vcc8-supply = <&vsys_3v3>;
+		vcc9-supply = <&vsys_3v3>;
+		vcc10-supply = <&vsys_3v3>;
+		vcc11-supply = <&vsys_3v3>;
+		vcc12-supply = <&vsys_3v3>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_apio2: LDO_REG1 {
+				regulator-name = "vcc1v8_apio2";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_vldo2: LDO_REG2 {
+				regulator-name = "vcc_vldo2";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG4 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_vldo5: LDO_REG5 {
+				regulator-name = "vcc_vldo5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc1v8_codec: LDO_REG7 {
+				regulator-name = "vcc1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_apio2>;
+	audio-supply = <&vcc1v8_codec>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_rx: ir-rx {
+		    rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led_pin: user-led-pin {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	/* WiFi & BT combo module Ampak AP6356S */
+	bus-width = <4>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc1v8_s3>;
+	vmmc-supply = <&vccio_sd>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		brcm,drive-strength = <5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "winbond,w25q128fw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+		vbat-supply = <&vsys_3v3>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
new file mode 100644
index 0000000000..1eb287a3f8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io>
+ */
+
+/*
+ * The Kobol Helios64 is a board designed to operate as a NAS and optionally
+ * ships with an enclosing that can host five 2.5" hard disks.
+ *
+ * See https://wiki.kobol.io/helios64/intro/ for further details.
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Kobol Helios64";
+	compatible = "kobol,helios64", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi5 = &spi5;
+	};
+
+	avdd_0v9_s0: avdd-0v9-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_0v9_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc1v8_sys_s3>;
+	};
+
+	avdd_1v8_s0: avdd-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_1v8_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys_s3>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	fan1 {
+		/* fan connected to P7 */
+		compatible = "pwm-fan";
+		pwms = <&pwm0 0 40000 0>;
+		cooling-levels = <0 80 170 255>;
+	};
+
+	fan2 {
+		/* fan connected to P6 */
+		compatible = "pwm-fan";
+		pwms = <&pwm1 0 40000 0>;
+		cooling-levels = <0 80 170 255>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>;
+
+		led-0 {
+			label = "helios64:green:status";
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "helios64:red:fault";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	hdd_a_power: hdd-a-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&hdd_a_power_en>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "hdd_a_power";
+		startup-delay-us = <2000000>;
+	};
+
+	hdd_b_power: hdd-b-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&hdd_b_power_en>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "hdd_b_power";
+		startup-delay-us = <2000000>;
+	};
+
+	pcie_power: pcie-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pcie_pwr>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+		regulator-name = "pcie_power";
+		startup-delay-us = <10000>;
+		vin-supply = <&vcc5v0_perdev>;
+	};
+
+	usblan_power: usblan-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_lan_en>;
+		regulator-name = "usblan_power";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc1v8_sys_s0: vcc1v8-sys-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_sys_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc1v8_sys_s3>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v0_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		vin-supply = <&vcc3v3_sys_s3>;
+	};
+
+	vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc5v0_perdev: vcc5v0-perdev {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_perdev";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin_bkup>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin_bkup>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_en>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_perdev>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc12v_dcin_bkup: vcc12v-dcin-bkup {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin_bkup";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+/*
+ * The system doesn't run stable with cpu freq enabled, so disallow the lower
+ * frequencies until this problem is properly understood and resolved.
+ */
+&cluster0_opp {
+	/delete-node/ opp00;
+	/delete-node/ opp01;
+	/delete-node/ opp02;
+	/delete-node/ opp03;
+	/delete-node/ opp04;
+};
+
+&cluster1_opp {
+	/delete-node/ opp00;
+	/delete-node/ opp01;
+	/delete-node/ opp02;
+	/delete-node/ opp03;
+	/delete-node/ opp04;
+	/delete-node/ opp05;
+	/delete-node/ opp06;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_lan>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins &gphy_reset>;
+	rx_delay = <0x20>;
+	tx_delay = <0x28>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys_s3>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys_s3>;
+		vddio-supply = <&vcc3v0_s3>;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_sys_s3: DCDC_REG4 {
+				regulator-name = "vcc1v8_sys_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio_s0: LDO_REG4 {
+				regulator-name = "vcc_sdio_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v0_s3: LDO_REG8 {
+				regulator-name = "vcc3v0_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	temp@4c {
+		compatible = "national,lm75";
+		reg = <0x4c>;
+	};
+};
+
+&io_domains {
+	audio-supply = <&vcc1v8_sys_s0>;
+	bt656-supply = <&vcc1v8_sys_s0>;
+	gpio1830-supply = <&vcc3v0_s3>;
+	sdmmc-supply = <&vcc_sdio_s0>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	vpcie12v-supply = <&vcc12v_dcin>;
+	vpcie3v3-supply = <&pcie_power>;
+	vpcie1v8-supply = <&avdd_1v8_s0>;
+	vpcie0v9-supply = <&avdd_0v9_s0>;
+};
+
+&pinctrl {
+	gmac {
+		gphy_reset: gphy-reset {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	leds {
+		sys_grn_led_on: sys-grn-led-on {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		sys_red_led_on: sys-red-led-on {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	pcie {
+		pcie_pwr: pcie-pwr {
+			rockchip,pins =
+				<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	power {
+		hdd_a_power_en: hdd-a-power-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hdd_b_power_en: hdd-b-power-en {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_en: vcc5v0-usb-en {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_lan_en: usb-lan-en {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc3v0-sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc3v0_s3>;
+	status = "okay";
+};
+
+&pwm0 {
+	/* pwm-fan on P7 */
+	status = "okay";
+};
+
+&pwm1 {
+	/* pwm-fan on P6 */
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vqmmc-supply = <&vcc1v8_sys_s0>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio_s0>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <25000000>;
+		status = "okay";
+		m25p,fast-read;
+	};
+};
+
+/* UEXT connector */
+&spi2 {
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+};
+
+&tcphy1 {
+	/* phy for &usbdrd_dwc3_1 */
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+
+	otg-port {
+		/* phy for &usbdrd_dwc3_1 */
+		phy-supply = <&vcc5v0_usb>;
+		status = "okay";
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+
+	usb@fe900000 {
+		dr_mode = "host";
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hub@1 {
+			compatible = "usb2109,0815";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+
+			port@3 {
+				reg = <3>;
+				#trigger-source-cells = <0>;
+			};
+
+			device@4 {
+				compatible = "usbbda,8156";
+				reg = <4>;
+				#address-cells = <2>;
+				#size-cells = <0>;
+
+				interface@0 {	/* interface 0 of configuration 1 */
+					compatible = "usbbda,8156.config1.0";
+					reg = <0 1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
new file mode 100644
index 0000000000..a21ac319f8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Leez RK3399 P710";
+	compatible = "leez,p710", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	dc5v_adp: dc5v-adp {
+		compatible = "regulator-fixed";
+		regulator-name = "dc5v_adapter";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_lan: vcc3v3-lan {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host0: vcc5v0_host1: vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host3: vcc5v0-host3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host3";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host3_en>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc5v_adp>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG4 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcc0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcc_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+	bt {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host3_en: vcc5v0-host3-en {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host0>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host1>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
new file mode 100644
index 0000000000..3bf8f959e4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPC-T4";
+	compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+
+	vcc12v0_sys: vcc12v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "vcc12v0_sys";
+	};
+
+	vcc5v0_host0: vcc5v0-host0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vcc5v0_host0";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		/*
+		 * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
+		 * work out to 0, ~1200, ~3000, and 5000RPM respectively.
+		 */
+		cooling-levels = <0 12 18 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vcc12v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+};
+
+&pinctrl {
+	ir {
+		ir_rx: ir-rx {
+			/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
+			rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host0>;
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host0>;
+};
+
+&vcc5v0_sys {
+	vin-supply = <&vcc12v0_sys>;
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc12v0_sys>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts
new file mode 100644
index 0000000000..60358ab8c7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi M4";
+	compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_core: vcc5v0-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_core";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v>;
+	};
+
+	vcc5v0_usb1: vcc5v0-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb1";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2: vcc5v0-usb2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb2";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_usb2>;
+};
+
+&vbus_typec {
+	regulator-always-on;
+	vin-supply = <&vdd_5v>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
new file mode 100644
index 0000000000..65cb21837b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4B board device tree source
+ *
+ * Copyright (c) 2020 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi-m4.dts"
+
+/ {
+	model = "FriendlyElec NanoPi M4B";
+	compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1500000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+};
+
+/* No USB type-C PD power manager */
+/delete-node/ &fusb0;
+
+&i2c4 {
+	status = "disabled";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb2>;
+};
+
+&u2phy0_otg {
+	phy-supply = <&vbus_typec>;
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts
new file mode 100644
index 0000000000..195410b089
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi NEO4";
+	compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_core: vcc5v0-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_core";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v>;
+	};
+
+	vcc5v0_usb1: vcc5v0-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb1";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+	regulator-always-on;
+	vin-supply = <&vdd_5v>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts
new file mode 100644
index 0000000000..a23d11ca0e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3399-nanopi-r4s.dts"
+
+/ {
+	model = "FriendlyElec NanoPi R4S Enterprise Edition";
+	compatible = "friendlyarm,nanopi-r4s-enterprise", "rockchip,rk3399";
+};
+
+&gmac {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c2 {
+	eeprom@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		size = <256>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
new file mode 100644
index 0000000000..fe5b526100
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ *
+ * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
+ * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
+ * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R4S";
+	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
+	/delete-node/ display-subsystem;
+
+	gpio-leds {
+		pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+
+		/delete-node/ led-0;
+
+		lan_led: led-lan {
+			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+			label = "green:lan";
+		};
+
+		sys_led: led-sys {
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			label = "red:power";
+			default-state = "on";
+		};
+
+		wan_led: led-wan {
+			gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+			label = "green:wan";
+		};
+	};
+
+	gpio-keys {
+		pinctrl-0 = <&reset_button_pin>;
+
+		/delete-node/ key-power;
+
+		key-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc_phy {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&pcie0 {
+	max-link-speed = <1>;
+	num-lanes = <1>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+};
+
+&pinctrl {
+	gpio-leds {
+		/delete-node/ status-led-pin;
+
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rockchip-key {
+		/delete-node/ power-key;
+
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdhci {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&u2phy0_host {
+	phy-supply = <&vdd_5v>;
+};
+
+&u2phy1_host {
+	status = "disabled";
+};
+
+&uart0 {
+	status = "disabled";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
new file mode 100644
index 0000000000..7c5f441a22
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -0,0 +1,761 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_sys";
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_sys";
+		vin-supply = <&vdd_5v>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc1v8_s3";
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/*
+	 * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
+	 * drives the enable pin, but we can't quite model that.
+	 */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		regulator-name = "vcca0v9_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
+	/* As above, actually supplied by vcc3v3_sys */
+	vcca1v8_s3: vcca1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcca1v8_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
+	vbus_typec: vbus-typec {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vbus_typec";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&status_led_pin>;
+
+		status_led: led-0 {
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			label = "status_led";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	rockchip,enable-strobe-pulldown;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc3v3_s3>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-name = "vdd_cpu_b";
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-name = "vdd_gpu";
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		clock-output-names = "xin32k", "rtc_clko_wifi";
+		#clock-cells = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_center";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_cpu_l";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_cam: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_cam";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc3v0_touch";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_pmupll";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_sdio";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcca3v0_codec";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vcc_1v5";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_codec";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc_3v0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_s3";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <200000>;
+	i2c-scl-rising-time-ns = <150>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vbus_typec>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc_1v8>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pcie_phy {
+	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
+	assigned-clock-rates = <100000000>;
+	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
+	status = "okay";
+};
+
+&pcie0 {
+	num-lanes = <2>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&pinctrl {
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		status_led_pin: status-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac {
+		phy_intb: phy-intb {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rstb: phy-rstb {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		power_key: power-key {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio {
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			/* external pullup to VCC1V8_PMUPLL */
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_reg_on_h: wifi-reg_on-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc0_det_l: sdmmc0-det-l {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm2_pin_pull_down>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
new file mode 100644
index 0000000000..783120e9ce
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/ {
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <900000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <850000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <900000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <975000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <1250000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <800000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <297000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <850000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <925000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1075000>;
+		};
+	};
+
+	dmc_opp_table: opp-table-3 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <900000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <666000000>;
+			opp-microvolt = <900000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <900000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <928000000>;
+			opp-microvolt = <925000>;
+		};
+	};
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&dmc {
+	operating-points-v2 = <&dmc_opp_table>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
new file mode 100644
index 0000000000..fee5e71112
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/ {
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000 825000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000 850000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000 925000 1250000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000 825000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <825000 825000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <875000 875000 1250000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <950000 950000 1250000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1200000 1200000 1250000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <825000 825000 1150000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <297000000>;
+			opp-microvolt = <825000 825000 1150000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000 825000 1150000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <875000 875000 1150000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <925000 925000 1150000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000 1100000 1150000>;
+		};
+	};
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
new file mode 100644
index 0000000000..dba4d03bfc
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -0,0 +1,895 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dt-bindings/usb/pd.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Orange Pi RK3399 Board";
+	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			press-threshold-microvolt = <985000>;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <1314000>;
+		};
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_btn>;
+			wakeup-source;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vbus_typec: vbus-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vbus_typec";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_s3>;
+	phy-mode = "rgmii";
+	phy-handle = <&rtl8211e>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	ak09911@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+		vdd-supply = <&vcc3v3_s3>;
+		vid-supply = <&vcc3v3_s3>;
+	};
+
+	mpu6500@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int_l>;
+		vddio-supply = <&vcc3v3_s3>;
+	};
+
+	lsm6ds3@6a {
+		compatible = "st,lsm6ds3";
+		reg = <0x6a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gyr_int_l>;
+		vdd-supply = <&vcc3v3_s3>;
+		vddio-supply = <&vcc3v3_s3>;
+	};
+
+	cm32181@10 {
+		compatible = "capella,cm32181";
+		reg = <0x10>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&light_int_l>;
+		vdd-supply = <&vcc3v3_s3>;
+	};
+
+	fusb302@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&chg_cc_int_l>;
+		vbus-supply = <&vbus_typec>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "host";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					typec_hs: endpoint {
+						remote-endpoint = <&u2phy0_typec_hs>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					typec_ss: endpoint {
+						remote-endpoint = <&tcphy0_typec_ss>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					typec_dp: endpoint {
+						remote-endpoint = <&tcphy0_typec_dp>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcc_3v0>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+	buttons {
+		pwr_btn: pwr-btn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gmac {
+		phy_intb: phy-intb {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rstb: phy-rstb {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_typec_en: vcc5v0-typec-en {
+			rockchip,pins =
+				<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	bluetooth {
+		bt_reg_on_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mpu6500 {
+		gsensor_int_l: gsensor-int-l {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lsm6ds3 {
+		gyr_int_l: gyr-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cm32181 {
+		light_int_l: light-int-l {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb302 {
+		chg_cc_int_l: chg-cc-int-l {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	clock-frequency = <50000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	clock-frequency = <150000000>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_dp {
+	port {
+		tcphy0_typec_dp: endpoint {
+			remote-endpoint = <&typec_dp>;
+		};
+	};
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&typec_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&typec_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
new file mode 100644
index 0000000000..054c6a4d1a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Pine64 Pinebook Pro";
+	compatible = "pine64,pinebook-pro", "rockchip,rk3399";
+	chassis-type = "laptop";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: edp-backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_12v>;
+		pwms = <&pwm0 0 740740 0>;
+	};
+
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <9800000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3000000>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv140fhmn49";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_pin>;
+		power-supply = <&vcc3v3_panel>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	/*
+	 * Use separate nodes for gpio-keys to allow for selective deactivation
+	 * of wakeup sources via sysfs without disabling the whole key
+	 */
+	gpio-key-lid {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lidbtn_pin>;
+
+		switch-lid {
+			debounce-interval = <20>;
+			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "Lid";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-key-power {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn_pin>;
+
+		key-power {
+			debounce-interval = <20>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+			label = "green:power";
+		};
+
+		red_led: led-1 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STANDBY;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "red:standby";
+			panic-indicator;
+			retain-state-suspended;
+		};
+	};
+
+	/* Power sequence for SDIO WiFi module */
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h_pin>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <500000>;
+
+		/* WL_REG_ON on module */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Audio components */
+	es8316-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_pin>;
+		simple-audio-card,name = "rockchip,es8316-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker Amplifier INL", "HPOL",
+			"Speaker Amplifier INR", "HPOR",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR";
+
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,aux-devs = <&speaker_amp>;
+		simple-audio-card,pin-switches = "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8316>;
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&pa_5v>;
+	};
+
+	/* Power tree */
+	/* Root power source */
+	vcc_sysin: vcc-sysin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sysin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Regulators supplied by vcc_sysin */
+	/* LCD backlight supply */
+	vcc_12v: vcc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Main 3.3 V supply */
+	vcc3v3_sys: wifi_bat: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* 5 V USB power supply */
+	vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_5v_pin>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* RK3399 logic supply */
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sysin>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc3v3_sys */
+	/* 0.9 V supply, always on */
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* S3 1.8 V supply, switched by vcc1v8_s3 */
+	vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h_pin>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* LCD panel power, called VCC3V3_S0 in schematic */
+	vcc3v3_panel: vcc3v3-panel {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdvcc_en_pin>;
+		regulator-name = "vcc3v3_panel";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <100000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* M.2 adapter power, switched by vcc1v8_s3 */
+	vcc3v3_ssd: vcc3v3-ssd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ssd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* USB 3 port power supply regulator  */
+	vcc5v0_otg: vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en_pin>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* Type C port power supply regulator */
+	vbus_5vout: vbus_typec: vbus-5vout {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en_pin>;
+		regulator-name = "vbus_5vout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc_1v8 */
+	/* Primary 0.9 V LDO */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v9_s3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	mains_charger: dc-charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
+
+		/* Also triggered by USB charger */
+		pinctrl-names = "default";
+		pinctrl-0 = <&dc_det_pin>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&edp {
+	force-hpd;
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l_pin>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sysin>;
+		vcc2-supply = <&vcc_sysin>;
+		vcc3-supply = <&vcc_sysin>;
+		vcc4-supply = <&vcc_sysin>;
+		vcc6-supply = <&vcc_sysin>;
+		vcc7-supply = <&vcc_sysin>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sysin>;
+		vcc10-supply = <&vcc_sysin>;
+		vcc11-supply = <&vcc_sysin>;
+		vcc12-supply = <&vcc3v3_sys>;
+
+		regulators {
+			/* rk3399 center logic supply */
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: vcc_wl: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* not used */
+			LDO_REG1 {
+			};
+
+			/* not used */
+			LDO_REG2 {
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-falling-time-ns = <15>;
+	i2c-scl-rising-time-ns = <450>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <600>;
+	status = "okay";
+
+	fusb0: fusb30x@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int_pin>;
+		vbus-supply = <&vbus_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint =
+							<&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usbc_dp: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_dp>;
+					};
+				};
+			};
+		};
+	};
+
+	cw2015@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		cellwise,battery-profile = /bits/ 8 <
+			0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+			0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+			0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+			0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+			0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+			0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+			0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+			0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+		>;
+		cellwise,monitor-interval-ms = <5000>;
+		monitored-battery = <&bat>;
+		power-supplies = <&mains_charger>, <&fusb0>;
+	};
+};
+
+&i2s1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
+	rockchip,capture-channels = <8>;
+	rockchip,playback-channels = <8>;
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	bus-scan-delay-ms = <1000>;
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
+	vpcie3v3-supply = <&vcc3v3_ssd>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn_pin: pwrbtn-pin {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		lidbtn_pin: lidbtn-pin {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dc-charger {
+		dc_det_pin: dc-det-pin {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	es8316 {
+		hp_det_pin: hp-det-pin {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int_pin: fusb0-int-pin {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	i2s1 {
+		i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
+			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcdvcc_en_pin: lcdvcc-en-pin {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		panel_en_pin: panel-en-pin {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lcd_panel_reset_pin: lcd-panel-reset-pin {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		pwr_led_pin: pwr-led-pin {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		slp_led_pin: slp-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l_pin: pmic-int-l-pin {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdcard {
+		sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h_pin: wifi-enable-h-pin {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		pwr_5v_pin: pwr-5v-pin {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host_en_pin: vcc5v0-host-en-pin {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_wake_pin: bt-wake-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_pin: bt-host-wake-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_pin: bt-reset-pin {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	max-freq = <10000000>;
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_dp {
+	port {
+		tcphy0_typec_dp: endpoint {
+			remote-endpoint = <&usbc_dp>;
+		};
+	};
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&wifi_bat>;
+		vddio-supply = <&vcc_wl>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
new file mode 100644
index 0000000000..61f3fec5a8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -0,0 +1,621 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Martijn Braam <martijn@brixit.nl>
+ * Copyright (c) 2021 Kamil Trzciński <ayufan@ayufan.eu>
+ */
+
+/*
+ * PinePhone Pro datasheet:
+ * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Pine64 PinePhonePro";
+	compatible = "pine64,pinephone-pro", "rockchip,rk3399";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1600000>;
+		poll-interval = <100>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <600000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000 0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn_pin>;
+
+		key-power {
+			debounce-interval = <20>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcca1v8_s3: vcc1v8-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8_s3";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc1v8_codec: vcc1v8-codec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc1v8_codec_en>;
+		regulator-name = "vcc1v8_codec";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	wifi_pwrseq: sdio-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk818 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h_pin>;
+		/*
+		 * Wait between power-on and SDIO access for CYP43455
+		 * POR circuit.
+		 */
+		post-power-on-delay-ms = <110>;
+		/*
+		 * Wait between consecutive toggles for CYP43455 CBUCK
+		 * regulator discharge.
+		 */
+		power-off-delay-us = <10000>;
+
+		/* WL_REG_ON on module */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* MIPI DSI panel 1.8v supply */
+	vcc1v8_lcd: vcc1v8-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+		gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+	};
+
+	/* MIPI DSI panel 2.8v supply */
+	vcc2v8_lcd: vcc2v8-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc2v8_lcd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc3v3_sys>;
+		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+	};
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+&cpu_alert1 {
+	temperature = <68000>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk818: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_cpu_l: DCDC_REG1 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <975000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_center: DCDC_REG2 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG1 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-name = "vcc3v0_touch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcca1v8_codec: LDO_REG3 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			rk818_pwr_on: LDO_REG4 {
+				regulator-name = "rk818_pwr_on";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG5 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG7 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc3v3_s3: LDO_REG8 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG9 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc3v3_s0: SWITCH_REG {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <875000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <875000>;
+		regulator-max-microvolt = <975000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt1158";
+		reg = <0x14>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
+&cluster0_opp {
+	opp04 {
+		status = "disabled";
+	};
+
+	opp05 {
+		status = "disabled";
+	};
+};
+
+&cluster1_opp {
+	opp06 {
+		opp-hz = /bits/ 64 <1500000000>;
+		opp-microvolt = <1100000 1100000 1150000>;
+	};
+
+	opp07 {
+		status = "disabled";
+	};
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+	clock-master;
+
+	ports {
+		mipi_out: port@1 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "hannstar,hsd060bhw4";
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc2v8_lcd>;
+		iovcc-supply = <&vcc1v8_lcd>;
+		pinctrl-names = "default";
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn_pin: pwrbtn-pin {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h_pin: wifi-enable-h-pin {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		vcc1v8_codec_en: vcc1v8-codec-en {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_wake_pin: bt-wake-pin {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_pin: bt-host-wake-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_pin: bt-reset-pin {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk818 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+	assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>,
+			  <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+	assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
+	assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>;
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+	assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>,
+			  <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+	assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
+	assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>;
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
new file mode 100644
index 0000000000..115c14c0a3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3399-puma.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3399-Q7 SoM";
+	compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
+
+	aliases {
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
+
+		sd_card_led: led-1 {
+			label = "sd_card_led";
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	i2s0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			clocks = <&sgtl5000_clk>;
+			sound-dai = <&sgtl5000>;
+		};
+
+		simple-audio-card,cpu {
+			bitclock-master;
+			frame-master;
+			sound-dai = <&i2s0>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator  {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+
+	vdda_codec: vdda-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vddd_codec: vddd-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vdda_codec>;
+		VDDIO-supply = <&vdda_codec>;
+		VDDD-supply = <&vddd_codec>;
+		status = "okay";
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&haikou_pin_hog>;
+
+	hog {
+		haikou_pin_hog: haikou-pin-hog {
+			rockchip,pins =
+			  /* LID_BTN */
+			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BATLOW# */
+			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* SLP_BTN# */
+			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BIOS_DISABLE# */
+			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sd_card_led_pin: sd-card-led-pin {
+			rockchip,pins =
+			  <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+			  <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <40000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+	extcon = <&extcon_usb3>;
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
new file mode 100644
index 0000000000..20e3f41efe
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pin>;
+
+		module_led: led-0 {
+			label = "module_led";
+			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	extcon_usb3: extcon-usb3 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc1v2_phy: vcc1v2-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2_phy";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+	drive-impedance-ohm = <33>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc1v2_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_ldo1: LDO_REG1 {
+				regulator-name = "vcc_ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_ldo5: LDO_REG5 {
+				regulator-name = "vcc_ldo5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ldo6: LDO_REG6 {
+				regulator-name = "vcc_ldo6";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcc0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_efuse: LDO_REG8 {
+				regulator-name = "vcc_efuse";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_gpu: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1230000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	fan: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	vdd_cpu_b: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1230000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_2ch_bus>;
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+/*
+ * As Q7 does not specify neither a global nor a RX clock for I2S these
+ * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
+ * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
+ * conflicts.
+ */
+&i2s0_2ch_bus {
+	rockchip,pins =
+		<3 RK_PD0 1 &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcc_1v8>;
+	audio-supply = <&vcc_1v8>;
+	sdmmc-supply = <&vcc_sd>;
+	gpio1830-supply = <&vcc_1v8>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	i2c8 {
+		i2c8_xfer_a: i2c8-xfer {
+			rockchip,pins =
+			  <1 RK_PC4 1 &pcfg_pull_up>,
+			  <1 RK_PC5 1 &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		module_led_pin: module-led-pin {
+			rockchip,pins =
+			  <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+			  <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb3 {
+		usb3_id: usb3-id {
+			rockchip,pins =
+			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	/*
+	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+	 * enough.
+	 */
+	max-frequency = <100000000>;
+
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	vqmmc-supply = <&vcc_sd>;
+};
+
+&spi1 {
+	status = "okay";
+
+	norflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
new file mode 100644
index 0000000000..9447c8724b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Mezzanine Board";
+	compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+
+	/* MP8009 PoE PD */
+	poe_12v: poe-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "poe_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_ngff: vcc3v3-ngff {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_ngff_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&sys_12v>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&sys_12v>;
+	};
+};
+
+&sys_12v {
+	vin-supply = <&poe_12v>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	vpcie1v8-supply = <&vcc1v8_pmu>;
+	vpcie0v9-supply = <&vcca_0v9>;
+	status = "okay";
+};
+
+&pinctrl {
+	ngff {
+		vcc3v3_ngff_en: vcc3v3-ngff-en {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		vcc3v3_pcie_en: vcc3v3-pcie-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_perst: pcie-perst {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_ngff>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
new file mode 100644
index 0000000000..7ba1c28f70
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/*
+ * Notice:
+ * 1. rk3399-roc-pc-plus is powered by dc_12v directly.
+ * 2. rk3399-roc-pc-plus has only vcc_bus_typec0 in schematic, which is coresponding
+ *    to vcc_vbus_typec1 in rk3399-roc-pc.
+ *    For simplicity, reserve the node name of vcc_vbus_typec1.
+ * 3. vcc5v0_host is actually 2 regulators (host0, 1) controlled by the same gpio.
+ */
+
+/delete-node/ &fusb1;
+/delete-node/ &hub_rst;
+/delete-node/ &mp8859;
+/delete-node/ &vcc_sys_en;
+/delete-node/ &vcc_vbus_typec0;
+/delete-node/ &yellow_led;
+
+/ {
+	model = "Firefly ROC-RK3399-PC-PLUS Board";
+	compatible = "firefly,roc-rk3399-pc-plus", "rockchip,rk3399";
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	es8388-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_pin>;
+		simple-audio-card,name = "rockchip,es8388-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"LINPUT1", "Mic Jack",
+			"Headphone Amp INL", "LOUT2",
+			"Headphone Amp INR", "ROUT2",
+			"Headphones", "Headphone Amp OUTL",
+			"Headphones", "Headphone Amp OUTR";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,aux-devs = <&headphones_amp>;
+		simple-audio-card,pin-switches = "Headphones";
+
+		simple-audio-card,codec {
+			sound-dai = <&es8388>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+	};
+
+	gpio-fan {
+		#cooling-cells = <2>;
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 3000 1>;
+		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+	};
+
+	/delete-node/ gpio-keys;
+
+	/* not amplifier, used as switcher only */
+	headphones_amp: headphones-amp {
+		compatible = "simple-audio-amplifier";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ear_ctl_pin>;
+		enable-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphone Amp";
+		VCC-supply = <&vcca3v0_codec>;
+	};
+
+	ir-receiver {
+		linux,rc-map-name = "rc-khadas";
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
+	};
+};
+
+&fusb0 {
+	vbus-supply = <&vcc_vbus_typec1>;
+};
+
+&i2c0 {
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_EDGE_FALLING>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+	};
+};
+
+&i2c1 {
+	es8388: es8388@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* <4 RK_PA0 1 &pcfg_pull_none> is used as i2s_8ch_mclk_pin */
+&i2s0_8ch_bus {
+	rockchip,pins =
+		<3 RK_PD0 1 &pcfg_pull_none>,
+		<3 RK_PD1 1 &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD4 1 &pcfg_pull_none>,
+		<3 RK_PD5 1 &pcfg_pull_none>,
+		<3 RK_PD6 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
+&i2s1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&pinctrl {
+	es8388 {
+		ear_ctl_pin: ear-ctl-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		hp_det_pin: hp-det-pin {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	i2s1 {
+		i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
+			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vcc_sys {
+	/* vcc_sys is fixed, not controlled by any gpio */
+	/delete-property/ gpio;
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&vcc5v0_host {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
new file mode 100644
index 0000000000..cd41954253
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
new file mode 100644
index 0000000000..c32913df93
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -0,0 +1,843 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1500000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_l>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
+
+		work_led: led-0 {
+			label = "green:work";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		diy_led: led-1 {
+			label = "red:diy";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc2";
+		};
+
+		yellow_led: led-2 {
+			label = "yellow:yellow-led";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_vbus_typec0: vcc-vbus-typec0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_vbus_typec0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sys_12v: sys-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc_12v>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v0_sd_en>;
+		regulator-name = "vcc3v0_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&sys_12v>;
+	};
+
+	vcca_0v9: vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_vbus_typec1: vcc-vbus-typec1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_vbus_typec1_en>;
+		regulator-name = "vcc_vbus_typec1";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_sys_en>;
+		regulator-name = "vcc_sys";
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&sys_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <450000>;
+		regulator-max-microvolt = <1400000>;
+		pwm-supply = <&vcc3v3_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vcca0v9_hdmi>;
+	avdd-1v8-supply = <&vcca1v8_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG1 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb1: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb1_int>;
+		vbus-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+
+	mp8859: regulator@66 {
+		compatible = "mps,mp8859";
+		reg = <0x66>;
+		dc_12v: mp8859_dcdc {
+			regulator-name = "dc_12v";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vcc_vbus_typec0>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <12000000>;
+			};
+		};
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcca1v8_codec>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwr_key_l: pwr-key-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		diy_led_pin: diy-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led_pin: work-led-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		yellow_led_pin: yellow-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		vcc3v0_sd_en: vcc3v0-sd-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc_sys_en: vcc-sys-en {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hub_rst: hub-rst {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb-typec {
+		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		fusb1_int: fusb1-int {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
new file mode 100644
index 0000000000..8bfd5f88d1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -0,0 +1,708 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2022 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include "rk3399.dtsi"
+#include "rk3399-t-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK 4C+";
+	compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1 &user_led2>;
+
+		/* USER_LED1 */
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		/* USER_LED2 */
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_3v3: vcc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_phy1: vcc3v3-phy1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_phy1";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_host1: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host1";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_host0_s0>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: vdd-log-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x2a>;
+	rx_delay = <0x21>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vcc_0v9_s0>;
+	avdd-1v8-supply = <&vcc_1v8_s0>;
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <180>;
+	clock-frequency = <400000>;
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5_s3>;
+		vcc6-supply = <&vcc_buck5_s3>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_center";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_cpu_l";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc3v3_sys";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5_s3: DCDC_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_buck5_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_0v9_s3: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vcc_0v9_s3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9_s0: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vcc_0v9_s0";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_1v8_s0: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_mipi: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc_mipi";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5_s0: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vcc_1v5_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0_s0: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc_3v0_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_sdio_s0: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_sdio_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_cam: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_cam";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_host0_s0: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc5v0_host0_s0";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			lcd_3v3: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "lcd_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel1_gpio>;
+		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel2_gpio>;
+		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-initial-mode = <1>; /* 1:force PWM 2:auto */
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc_1v8_s0>;
+	bt656-supply = <&vcc_3v0_s0>;
+	gpio1830-supply = <&vcc_3v0_s0>;
+	sdmmc-supply = <&vcc_sdio_s0>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led1: user-led1 {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2: user-led2 {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <4 8 1 &pcfg_pull_up_8ma>,
+					<4 9 1 &pcfg_pull_up_8ma>,
+					<4 10 1 &pcfg_pull_up_8ma>,
+					<4 11 1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <4 12 1 &pcfg_pull_none_18ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <4 13 1 &pcfg_pull_up_8ma>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec0_en: vcc5v0-typec-en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0_s0>;
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8_s3>;
+};
+
+&sdhci {
+	max-frequency = <150000000>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&vcc_sdio_s0>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host1>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host1>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	extcon = <&u2phy0>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
new file mode 100644
index 0000000000..7cfc198bba
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-t-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK 4SE";
+	compatible = "radxa,rock-4se", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
new file mode 100644
index 0000000000..f2279aa6ca
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -0,0 +1,791 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led2>;
+
+		/* USER_LED2 */
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	sound: sound {
+		compatible = "audio-graph-card";
+		label = "Analog";
+		dais = <&i2s0_p0>;
+	};
+
+	sound-dit {
+		compatible = "audio-graph-card";
+		label = "SPDIF";
+		dais = <&spdif_p0>;
+	};
+
+	spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port {
+			dit_p0_0: endpoint {
+				remote-endpoint = <&spdif_p0_0>;
+			};
+		};
+	};
+
+	vbus_typec: vbus-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vbus_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc12v_dcin: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_lan: vcc3v3-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vcca0v9_hdmi>;
+	avdd-1v8-supply = <&vcca1v8_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG1 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_cam: SWITCH_REG1 {
+				regulator-name = "vcc_cam";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_mipi: SWITCH_REG2 {
+				regulator-name = "vcc_mipi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	es8316: codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_p0_0>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
+	rockchip,capture-channels = <2>;
+	rockchip,playback-channels = <2>;
+	status = "okay";
+
+	i2s0_p0: port {
+		i2s0_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcca1v8_codec>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcc_1v8>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	es8316 {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hp_int: hp-int {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		user_led2: user-led2 {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio0 {
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>,
+					<2 RK_PC5 1 &pcfg_pull_up_20ma>,
+					<2 RK_PC6 1 &pcfg_pull_up_20ma>,
+					<2 RK_PC7 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0-typec-en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	max-frequency = <150000000>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&spdif {
+
+	spdif_p0: port {
+		spdif_p0_0: endpoint {
+			remote-endpoint = <&dit_p0_0>;
+		};
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts
new file mode 100644
index 0000000000..f5a68d8d07
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-op1-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4A+";
+	compatible = "radxa,rockpi4a-plus", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&es8316 {
+	pinctrl-0 = <&hp_detect &hp_int>;
+	pinctrl-names = "default";
+	interrupt-parent = <&gpio1>;
+	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sound {
+	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts
new file mode 100644
index 0000000000..d5df8939a6
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4A";
+	compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts
new file mode 100644
index 0000000000..8a17c1eaae
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-op1-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4B+";
+	compatible = "radxa,rockpi4b-plus", "radxa,rockpi4", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+};
+
+&es8316 {
+	pinctrl-0 = <&hp_detect &hp_int>;
+	pinctrl-names = "default";
+	interrupt-parent = <&gpio1>;
+	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sound {
+	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
new file mode 100644
index 0000000000..bee6d75883
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4B";
+	compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
new file mode 100644
index 0000000000..de2ebe4cb4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4C";
+	compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+};
+
+&es8316 {
+	pinctrl-0 = <&hp_detect &hp_int>;
+	pinctrl-names = "default";
+	interrupt-parent = <&gpio1>;
+	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sound {
+	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&vcc5v0_host {
+	gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host_en {
+	rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
new file mode 100644
index 0000000000..1a23e8f3cd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+
+/ {
+	model = "96boards Rock960";
+	compatible = "vamrs,rock960", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+			    <&user_led3_pin>, <&user_led4_pin>,
+			    <&wlan_led_pin>, <&bt_led_pin>;
+
+		user_led1: led-1 {
+			label = "green:user1";
+			gpios = <&gpio4 RK_PC2 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2: led-2 {
+			label = "green:user2";
+			gpios = <&gpio4 RK_PC6 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3: led-3 {
+			label = "green:user3";
+			gpios = <&gpio4 RK_PD0 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4: led-4 {
+			label = "green:user4";
+			gpios = <&gpio4 RK_PD4 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led: led-5 {
+			label = "yellow:wlan";
+			gpios = <&gpio4 RK_PD5 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led: led-6 {
+			label = "blue:bt";
+			gpios = <&gpio4 RK_PD6 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_thermal {
+	sustainable-power = <1550>;
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert1>;
+		};
+	};
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+	leds {
+		user_led1_pin: user-led1-pin {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2_pin: user-led2-pin {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3_pin: user-led3-pin {
+			rockchip,pins =
+				<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4_pin: user-led4-pin {
+			rockchip,pins =
+				<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led_pin: wlan-led-pin {
+			rockchip,pins =
+				<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led_pin: bt-led-pin {
+			rockchip,pins =
+				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins =
+				<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spi0 {
+	/* On Low speed expansion (LS-SPI0) */
+	status = "okay";
+};
+
+&spi4 {
+	/* On High speed expansion (HS-SPI1) */
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&vcc3v3_pcie {
+	gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+	gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
new file mode 100644
index 0000000000..c920ddf44b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc1v8_s0: vcc1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_drv>;
+		regulator-boot-on;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vcca0v9_hdmi>;
+	avdd-1v8-supply = <&vcca1v8_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		status = "okay";
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v0_sd: LDO_REG5 {
+				regulator-name = "vcc3v0_sd";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2s2 {
+        status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
+	audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
+	sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
+	gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcca_1v8>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins =
+				<4 RK_PB0 1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<4 RK_PB0 1 &pcfg_pull_up_8ma>,
+				<4 RK_PB1 1 &pcfg_pull_up_8ma>,
+				<4 RK_PB2 1 &pcfg_pull_up_8ma>,
+				<4 RK_PB3 1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				<4 RK_PB4 1 &pcfg_pull_none_18ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				<4 RK_PB5 1 &pcfg_pull_up_8ma>;
+		};
+	};
+
+	sdio0 {
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins =
+				<2 RK_PC4 1 &pcfg_pull_up_20ma>,
+				<2 RK_PC5 1 &pcfg_pull_up_20ma>,
+				<2 RK_PC6 1 &pcfg_pull_up_20ma>,
+				<2 RK_PC7 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins =
+				<2 RK_PD0 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins =
+				<2 RK_PD1 1 &pcfg_pull_none_20ma>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins =
+				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins =
+				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc_sd>;
+	card-detect-delay = <800>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	rockchip,hw-tshut-temp = <110000>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts
new file mode 100644
index 0000000000..304e3c5139
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
+ */
+
+/dts-v1/;
+#include "rk3399-rockpro64.dtsi"
+
+/ {
+	model = "Pine64 RockPro64 v2.0";
+	compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399";
+};
+
+&i2c1 {
+	es8316: codec@10 {
+		compatible = "everest,es8316";
+		reg = <0x10>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s1_p0_0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
new file mode 100644
index 0000000000..4b42717800
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
+ */
+
+/dts-v1/;
+#include "rk3399-rockpro64.dtsi"
+
+/ {
+	model = "Pine64 RockPro64 v2.1";
+	compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
+};
+
+&i2c1 {
+	es8316: codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s1_p0_0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
new file mode 100644
index 0000000000..bca2b50e0a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -0,0 +1,955 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	/* enable for panel backlight support */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		pwms = <&pwm0 0 1000000 0>;
+		status = "disabled";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
+
+		work_led: led-0 {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy_led: led-1 {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 100 150 200 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "Analog";
+		dais = <&i2s1_p0>;
+	};
+
+	sound-dit {
+		compatible = "audio-graph-card";
+		label = "SPDIF";
+		dais = <&spdif_p0>;
+	};
+
+	spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port {
+			dit_p0_0: endpoint {
+				remote-endpoint = <&spdif_p0_0>;
+			};
+		};
+	};
+
+	avdd: avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <11000000>;
+		regulator-max-microvolt = <11000000>;
+		vin-supply = <&vcc3v3_s0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1700000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-name = "vcc3v0_touch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+
+	/* enable for pine64 touch screen support */
+	touch: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+
+	i2s1_p0: port {
+		i2s1_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+/* enable for pine64 panel display support */
+&mipi_dsi {
+	clock-master;
+	status = "disabled";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	mipi_panel: panel@0 {
+		compatible = "feiyang,fy07024di26a30d";
+		reg = <0>;
+		avdd-supply = <&avdd>;
+		backlight = <&backlight>;
+		dvdd-supply = <&vcc3v3_s0>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie12v-supply = <&vcc12v_dcin>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		work_led_pin: work-led-pin {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_pin: diy-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_perst: pcie-perst {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdcard {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdif_bus_1>;
+
+	spdif_p0: port {
+		spdif_p0_0: endpoint {
+			remote-endpoint = <&dit_p0_0>;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
new file mode 100644
index 0000000000..dbec2b7173
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-sapphire.dtsi"
+
+/ {
+	model = "Excavator-RK3399 Board";
+	compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			press-threshold-microvolt = <985000>;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <1314000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm0 0 25000 0>;
+		status = "okay";
+	};
+
+	edp_panel: edp-panel {
+		compatible = "lg,lp079qx1-sp0v";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_panel_reset>;
+		power-supply = <&vcc3v3_s0>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	rt5651-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "realtek,rt5651-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Mic Jack", "MICBIAS1",
+			"IN1P", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rt5651>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&edp {
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	rt5651: rt5651@1a {
+		compatible = "rockchip,rt5651";
+		reg = <0x1a>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
+		spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	accelerometer@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pinctrl {
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	clock-frequency = <50000000>;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts
new file mode 100644
index 0000000000..5a58060447
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-sapphire.dtsi"
+
+/ {
+	model = "Sapphire-RK3399 Board";
+	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
new file mode 100644
index 0000000000..e6ac292ce6
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -0,0 +1,653 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/input/input.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/*
+	 * The fan power supply comes from the baseboard.
+	 * For the standalone Sapphire one option is to connect a wire
+	 * from  R90030 DNP R0805 pin2  to  C90002 10uF C0805 pin1 (vcc_sys).
+	 */
+	fan0: gpio-fan {
+		#cooling-cells = <2>;
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 3000 1>;
+		gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_btn>;
+			wakeup-source;
+		};
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-always-on;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_typec0: vcc5v0-typec0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en>;
+		regulator-name = "vcc5v0_typec0";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_hot: cpu_hot {
+			hysteresis = <10000>;
+			temperature = <55000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			cooling-device =
+				<&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			trip = <&cpu_hot>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc_3v0>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwr_btn: pwr-btn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fan {
+		motor_pwr: motor-pwr {
+			rockchip,pins =
+				<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_typec0_en: vcc5v0-typec0-en {
+			rockchip,pins =
+				<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	broken-cd;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	clock-frequency = <150000000>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_typec0>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi
new file mode 100644
index 0000000000..1ababadda9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2022 Radxa Limited
+ */
+
+/ {
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <875000 875000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <875000 875000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <900000 900000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <975000 975000 1250000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <875000 875000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <875000 875000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <875000 875000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000 925000 1250000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <875000 875000 1150000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <875000 875000 1150000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <875000 875000 1150000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000 975000 1150000>;
+		};
+	};
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
new file mode 100644
index 0000000000..4a3d0af5ec
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -0,0 +1,2941 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3399-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3399-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3399";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_l0>;
+				};
+				core1 {
+					cpu = <&cpu_l1>;
+				};
+				core2 {
+					cpu = <&cpu_l2>;
+				};
+				core3 {
+					cpu = <&cpu_l3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_b0>;
+				};
+				core1 {
+					cpu = <&cpu_b1>;
+				};
+			};
+		};
+
+		cpu_l0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_l1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_l2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_l3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_b0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <436>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+
+			thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <500>;
+			};
+		};
+
+		cpu_b1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <436>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+
+			thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <500>;
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopl_out>, <&vopb_out>;
+	};
+
+	dmc: memory-controller {
+		compatible = "rockchip,rk3399-dmc";
+		rockchip,pmu = <&pmugrf>;
+		devfreq-events = <&dfi>;
+		clocks = <&cru SCLK_DDRC>;
+		clock-names = "dmc_clk";
+		status = "disabled";
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+		arm,no-tick-in-suspend;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	pcie0: pcie@f8000000 {
+		compatible = "rockchip,rk3399-pcie";
+		reg = <0x0 0xf8000000 0x0 0x2000000>,
+		      <0x0 0xfd000000 0x0 0x1000000>;
+		reg-names = "axi-base", "apb-base";
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		aspm-no-l0s;
+		bus-range = <0x0 0x1f>;
+		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+		clock-names = "aclk", "aclk-perf",
+			      "hclk", "pm";
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "legacy", "client";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+				<0 0 0 2 &pcie0_intc 1>,
+				<0 0 0 3 &pcie0_intc 2>,
+				<0 0 0 4 &pcie0_intc 3>;
+		max-link-speed = <1>;
+		msi-map = <0x0 &its 0x0 0x1000>;
+		phys = <&pcie_phy 0>, <&pcie_phy 1>,
+		       <&pcie_phy 2>, <&pcie_phy 3>;
+		phy-names = "pcie-phy-0", "pcie-phy-1",
+			    "pcie-phy-2", "pcie-phy-3";
+		ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+			 <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
+		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
+			 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
+			 <&cru SRST_A_PCIE>;
+		reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+			      "pm", "pclk", "aclk";
+		status = "disabled";
+
+		pcie0_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie0_ep: pcie-ep@f8000000 {
+		compatible = "rockchip,rk3399-pcie-ep";
+		reg = <0x0 0xfd000000 0x0 0x1000000>,
+		      <0x0 0xfa000000 0x0 0x2000000>;
+		reg-names = "apb-base", "mem-base";
+		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+		clock-names = "aclk", "aclk-perf",
+			      "hclk", "pm";
+		max-functions = /bits/ 8 <8>;
+		num-lanes = <4>;
+		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
+			 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
+			 <&cru SRST_A_PCIE>;
+		reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+			      "pm", "pclk", "aclk";
+		phys = <&pcie_phy 0>, <&pcie_phy 1>,
+		       <&pcie_phy 2>, <&pcie_phy 3>;
+		phy-names = "pcie-phy-0", "pcie-phy-1",
+			    "pcie-phy-2", "pcie-phy-3";
+		rockchip,max-outbound-regions = <32>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_clkreqnb_cpm>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@fe300000 {
+		compatible = "rockchip,rk3399-gmac";
+		reg = <0x0 0xfe300000 0x0 0x10000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			 <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
+			 <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		power-domains = <&power RK3399_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
+		status = "disabled";
+	};
+
+	sdio0: mmc@fe310000 {
+		compatible = "rockchip,rk3399-dw-mshc",
+			     "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe310000 0x0 0x4000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		resets = <&cru SRST_SDIO0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@fe320000 {
+		compatible = "rockchip,rk3399-dw-mshc",
+			     "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe320000 0x0 0x4000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
+		max-frequency = <150000000>;
+		assigned-clocks = <&cru HCLK_SD>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		power-domains = <&power RK3399_PD_SD>;
+		resets = <&cru SRST_SDMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdhci: mmc@fe330000 {
+		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+		reg = <0x0 0xfe330000 0x0 0x10000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
+		arasan,soc-ctl-syscon = <&grf>;
+		assigned-clocks = <&cru SCLK_EMMC>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+		clock-names = "clk_xin", "clk_ahb";
+		clock-output-names = "emmc_cardclock";
+		#clock-cells = <0>;
+		phys = <&emmc_phy>;
+		phy-names = "phy_arasan";
+		power-domains = <&power RK3399_PD_EMMC>;
+		disable-cqe-dcmd;
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@fe380000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfe380000 0x0 0x20000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+			 <&u2phy0>;
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@fe3a0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfe3a0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+			 <&u2phy0>;
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@fe3c0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfe3c0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+			 <&u2phy1>;
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@fe3e0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfe3e0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+			 <&u2phy1>;
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	debug@fe430000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe430000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_L>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_l0>;
+	};
+
+	debug@fe432000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe432000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_L>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_l1>;
+	};
+
+	debug@fe434000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe434000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_L>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_l2>;
+	};
+
+	debug@fe436000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe436000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_L>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_l3>;
+	};
+
+	debug@fe610000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe610000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_B>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_b0>;
+	};
+
+	debug@fe710000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe710000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_B>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_b1>;
+	};
+
+	usbdrd3_0: usb@fe800000 {
+		compatible = "rockchip,rk3399-dwc3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
+			      "aclk_usb3", "grf_clk";
+		resets = <&cru SRST_A_USB3_OTG0>;
+		reset-names = "usb3-otg";
+		status = "disabled";
+
+		usbdrd_dwc3_0: usb@fe800000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe800000 0x0 0x100000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
+				 <&cru SCLK_USB3OTG0_SUSPEND>;
+			clock-names = "ref", "bus_early", "suspend";
+			dr_mode = "otg";
+			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			power-domains = <&power RK3399_PD_USB3>;
+			status = "disabled";
+		};
+	};
+
+	usbdrd3_1: usb@fe900000 {
+		compatible = "rockchip,rk3399-dwc3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
+			      "aclk_usb3", "grf_clk";
+		resets = <&cru SRST_A_USB3_OTG1>;
+		reset-names = "usb3-otg";
+		status = "disabled";
+
+		usbdrd_dwc3_1: usb@fe900000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe900000 0x0 0x100000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
+				 <&cru SCLK_USB3OTG1_SUSPEND>;
+			clock-names = "ref", "bus_early", "suspend";
+			dr_mode = "otg";
+			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			power-domains = <&power RK3399_PD_USB3>;
+			status = "disabled";
+		};
+	};
+
+	cdn_dp: dp@fec00000 {
+		compatible = "rockchip,rk3399-cdn-dp";
+		reg = <0x0 0xfec00000 0x0 0x100000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>;
+		assigned-clock-rates = <100000000>, <200000000>;
+		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+		clock-names = "core-clk", "pclk", "spdif", "grf";
+		phys = <&tcphy0_dp>, <&tcphy1_dp>;
+		power-domains = <&power RK3399_PD_HDCP>;
+		resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
+			 <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
+		reset-names = "spdif", "dptx", "apb", "core";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <1>;
+		status = "disabled";
+
+		ports {
+			dp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dp>;
+				};
+
+				dp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dp>;
+				};
+			};
+		};
+	};
+
+	gic: interrupt-controller@fee00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <4>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+
+		reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
+		      <0x0 0xfef00000 0 0xc0000>, /* GICR */
+		      <0x0 0xfff00000 0 0x10000>, /* GICC */
+		      <0x0 0xfff10000 0 0x10000>, /* GICH */
+		      <0x0 0xfff20000 0 0x10000>; /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		its: msi-controller@fee20000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xfee20000 0x0 0x20000>;
+		};
+
+		ppi-partitions {
+			ppi_cluster0: interrupt-partition-0 {
+				affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+			};
+
+			ppi_cluster1: interrupt-partition-1 {
+				affinity = <&cpu_b0 &cpu_b1>;
+			};
+		};
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,rk3399-saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	crypto0: crypto@ff8b0000 {
+		compatible = "rockchip,rk3399-crypto";
+		reg = <0x0 0xff8b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>;
+		reset-names = "master", "slave", "crypto-rst";
+	};
+
+	crypto1: crypto@ff8b8000 {
+		compatible = "rockchip,rk3399-crypto";
+		reg = <0x0 0xff8b8000 0x0 0x4000>;
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>;
+		reset-names = "master", "slave", "crypto-rst";
+	};
+
+	i2c1: i2c@ff110000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff110000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C1>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff120000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C2>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff130000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C3>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff140000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C5>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@ff150000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C6>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@ff160000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C7>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff180000 0x0 0x100>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff190000 0x0 0x100>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff1a0000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1a0000 0x0 0x100>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2c_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1b0000 0x0 0x100>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff1c0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1c0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 10>, <&dmac_peri 11>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff1d0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1d0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 12>, <&dmac_peri 13>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff1e0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1e0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 14>, <&dmac_peri 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi4: spi@ff1f0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1f0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 18>, <&dmac_peri 19>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi5: spi@ff200000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff200000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 8>, <&dmac_bus 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@ff260000 {
+		compatible = "rockchip,rk3399-tsadc";
+		reg = <0x0 0xff260000 0x0 0x100>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <750000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <95000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	qos_emmc: qos@ffa58000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa58000 0x0 0x20>;
+	};
+
+	qos_gmac: qos@ffa5c000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa5c000 0x0 0x20>;
+	};
+
+	qos_pcie: qos@ffa60080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa60080 0x0 0x20>;
+	};
+
+	qos_usb_host0: qos@ffa60100 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa60100 0x0 0x20>;
+	};
+
+	qos_usb_host1: qos@ffa60180 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa60180 0x0 0x20>;
+	};
+
+	qos_usb_otg0: qos@ffa70000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa70000 0x0 0x20>;
+	};
+
+	qos_usb_otg1: qos@ffa70080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa70080 0x0 0x20>;
+	};
+
+	qos_sd: qos@ffa74000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa74000 0x0 0x20>;
+	};
+
+	qos_sdioaudio: qos@ffa76000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa76000 0x0 0x20>;
+	};
+
+	qos_hdcp: qos@ffa90000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa90000 0x0 0x20>;
+	};
+
+	qos_iep: qos@ffa98000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa98000 0x0 0x20>;
+	};
+
+	qos_isp0_m0: qos@ffaa0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffaa0000 0x0 0x20>;
+	};
+
+	qos_isp0_m1: qos@ffaa0080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffaa0080 0x0 0x20>;
+	};
+
+	qos_isp1_m0: qos@ffaa8000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffaa8000 0x0 0x20>;
+	};
+
+	qos_isp1_m1: qos@ffaa8080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffaa8080 0x0 0x20>;
+	};
+
+	qos_rga_r: qos@ffab0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffab0000 0x0 0x20>;
+	};
+
+	qos_rga_w: qos@ffab0080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffab0080 0x0 0x20>;
+	};
+
+	qos_video_m0: qos@ffab8000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffab8000 0x0 0x20>;
+	};
+
+	qos_video_m1_r: qos@ffac0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffac0000 0x0 0x20>;
+	};
+
+	qos_video_m1_w: qos@ffac0080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffac0080 0x0 0x20>;
+	};
+
+	qos_vop_big_r: qos@ffac8000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffac8000 0x0 0x20>;
+	};
+
+	qos_vop_big_w: qos@ffac8080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffac8080 0x0 0x20>;
+	};
+
+	qos_vop_little: qos@ffad0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+
+	qos_perihp: qos@ffad8080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffad8080 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ffae0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+
+	pmu: power-management@ff310000 {
+		compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff310000 0x0 0x1000>;
+
+		/*
+		 * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
+		 * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
+		 * Some of the power domains are grouped together for every
+		 * voltage domain.
+		 * The detail contents as below.
+		 */
+		power: power-controller {
+			compatible = "rockchip,rk3399-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_CENTER */
+			power-domain@RK3399_PD_IEP {
+				reg = <RK3399_PD_IEP>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>;
+				pm_qos = <&qos_iep>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_RGA {
+				reg = <RK3399_PD_RGA>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>;
+				pm_qos = <&qos_rga_r>,
+					 <&qos_rga_w>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_VCODEC {
+				reg = <RK3399_PD_VCODEC>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+				pm_qos = <&qos_video_m0>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_VDU {
+				reg = <RK3399_PD_VDU>;
+				clocks = <&cru ACLK_VDU>,
+					 <&cru HCLK_VDU>,
+					 <&cru SCLK_VDU_CA>,
+					 <&cru SCLK_VDU_CORE>;
+				pm_qos = <&qos_video_m1_r>,
+					 <&qos_video_m1_w>;
+				#power-domain-cells = <0>;
+			};
+
+			/* These power domains are grouped by VD_GPU */
+			power-domain@RK3399_PD_GPU {
+				reg = <RK3399_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+
+			/* These power domains are grouped by VD_LOGIC */
+			power-domain@RK3399_PD_EDP {
+				reg = <RK3399_PD_EDP>;
+				clocks = <&cru PCLK_EDP_CTRL>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_EMMC {
+				reg = <RK3399_PD_EMMC>;
+				clocks = <&cru ACLK_EMMC>;
+				pm_qos = <&qos_emmc>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_GMAC {
+				reg = <RK3399_PD_GMAC>;
+				clocks = <&cru ACLK_GMAC>,
+					 <&cru PCLK_GMAC>;
+				pm_qos = <&qos_gmac>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_SD {
+				reg = <RK3399_PD_SD>;
+				clocks = <&cru HCLK_SDMMC>,
+					 <&cru SCLK_SDMMC>;
+				pm_qos = <&qos_sd>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_SDIOAUDIO {
+				reg = <RK3399_PD_SDIOAUDIO>;
+				clocks = <&cru HCLK_SDIO>;
+				pm_qos = <&qos_sdioaudio>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_TCPD0 {
+				reg = <RK3399_PD_TCPD0>;
+				clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+					 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_TCPD1 {
+				reg = <RK3399_PD_TCPD1>;
+				clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+					 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_USB3 {
+				reg = <RK3399_PD_USB3>;
+				clocks = <&cru ACLK_USB3>;
+				pm_qos = <&qos_usb_otg0>,
+					 <&qos_usb_otg1>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_VIO {
+				reg = <RK3399_PD_VIO>;
+				#power-domain-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				power-domain@RK3399_PD_HDCP {
+					reg = <RK3399_PD_HDCP>;
+					clocks = <&cru ACLK_HDCP>,
+						 <&cru HCLK_HDCP>,
+						 <&cru PCLK_HDCP>;
+					pm_qos = <&qos_hdcp>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3399_PD_ISP0 {
+					reg = <RK3399_PD_ISP0>;
+					clocks = <&cru ACLK_ISP0>,
+						 <&cru HCLK_ISP0>;
+					pm_qos = <&qos_isp0_m0>,
+						 <&qos_isp0_m1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3399_PD_ISP1 {
+					reg = <RK3399_PD_ISP1>;
+					clocks = <&cru ACLK_ISP1>,
+						 <&cru HCLK_ISP1>;
+					pm_qos = <&qos_isp1_m0>,
+						 <&qos_isp1_m1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3399_PD_VO {
+					reg = <RK3399_PD_VO>;
+					#power-domain-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@RK3399_PD_VOPB {
+						reg = <RK3399_PD_VOPB>;
+						clocks = <&cru ACLK_VOP0>,
+							 <&cru HCLK_VOP0>;
+						pm_qos = <&qos_vop_big_r>,
+							 <&qos_vop_big_w>;
+						#power-domain-cells = <0>;
+					};
+					power-domain@RK3399_PD_VOPL {
+						reg = <RK3399_PD_VOPL>;
+						clocks = <&cru ACLK_VOP1>,
+							 <&cru HCLK_VOP1>;
+						pm_qos = <&qos_vop_little>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+		};
+	};
+
+	pmugrf: syscon@ff320000 {
+		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xff320000 0x0 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	spi3: spi@ff350000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff350000 0x0 0x1000>;
+		clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff370000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff370000 0x0 0x100>;
+		clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff3c0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3c0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff3d0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3d0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@ff3e0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3e0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c8_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff420000 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff420010 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff420020 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420020 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff420030 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3a_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		status = "disabled";
+	};
+
+	dfi: dfi@ff630000 {
+		reg = <0x00 0xff630000 0x00 0x4000>;
+		compatible = "rockchip,rk3399-dfi";
+		rockchip,pmu = <&pmugrf>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DDR_MON>;
+		clock-names = "pclk_ddr_mon";
+		status = "disabled";
+	};
+
+	vpu: video-codec@ff650000 {
+		compatible = "rockchip,rk3399-vpu";
+		reg = <0x0 0xff650000 0x0 0x800>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3399_PD_VCODEC>;
+	};
+
+	vpu_mmu: iommu@ff650800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff650800 0x0 0x40>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_VCODEC>;
+	};
+
+	vdec: video-codec@ff660000 {
+		compatible = "rockchip,rk3399-vdec";
+		reg = <0x0 0xff660000 0x0 0x480>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
+			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
+		clock-names = "axi", "ahb", "cabac", "core";
+		iommus = <&vdec_mmu>;
+		power-domains = <&power RK3399_PD_VDU>;
+	};
+
+	vdec_mmu: iommu@ff660480 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VDU>;
+		#iommu-cells = <0>;
+	};
+
+	iep_mmu: iommu@ff670800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff670800 0x0 0x40>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	rga: rga@ff680000 {
+		compatible = "rockchip,rk3399-rga";
+		reg = <0x0 0xff680000 0x0 0x10000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
+		reset-names = "core", "axi", "ahb";
+		power-domains = <&power RK3399_PD_RGA>;
+	};
+
+	efuse0: efuse@ff690000 {
+		compatible = "rockchip,rk3399-efuse";
+		reg = <0x0 0xff690000 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE1024NS>;
+		clock-names = "pclk_efuse";
+
+		/* Data cells */
+		cpu_id: cpu-id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpub_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		gpu_leakage: gpu-leakage@18 {
+			reg = <0x18 0x1>;
+		};
+		center_leakage: center-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+		cpul_leakage: cpu-leakage@1a {
+			reg = <0x1a 0x1>;
+		};
+		logic_leakage: logic-leakage@1b {
+			reg = <0x1b 0x1>;
+		};
+		wafer_info: wafer-info@1c {
+			reg = <0x1c 0x1>;
+		};
+	};
+
+	dmac_bus: dma-controller@ff6d0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff6d0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC0_PERILP>;
+		clock-names = "apb_pclk";
+	};
+
+	dmac_peri: dma-controller@ff6e0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff6e0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC1_PERILP>;
+		clock-names = "apb_pclk";
+	};
+
+	pmucru: clock-controller@ff750000 {
+		compatible = "rockchip,rk3399-pmucru";
+		reg = <0x0 0xff750000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&pmugrf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&pmucru PLL_PPLL>;
+		assigned-clock-rates = <676000000>;
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3399-cru";
+		reg = <0x0 0xff760000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks =
+			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			<&cru PLL_NPLL>,
+			<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+			<&cru PCLK_PERIHP>,
+			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+			<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+			<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
+			<&cru ACLK_GIC_PRE>,
+			<&cru PCLK_DDR>,
+			<&cru ACLK_VDU>;
+		assigned-clock-rates =
+			 <594000000>,  <800000000>,
+			<1000000000>,
+			 <150000000>,   <75000000>,
+			  <37500000>,
+			 <100000000>,  <100000000>,
+			  <50000000>, <600000000>,
+			 <100000000>,   <50000000>,
+			 <400000000>, <400000000>,
+			 <200000000>,
+			 <200000000>,
+			 <400000000>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff770000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3399-io-voltage-domain";
+			status = "disabled";
+		};
+
+		mipi_dphy_rx0: mipi-dphy-rx0 {
+			compatible = "rockchip,rk3399-mipi-dphy-rx0";
+			clocks = <&cru SCLK_MIPIDPHY_REF>,
+				 <&cru SCLK_DPHY_RX0_CFG>,
+				 <&cru PCLK_VIO_GRF>;
+			clock-names = "dphy-ref", "dphy-cfg", "grf";
+			power-domains = <&power RK3399_PD_VIO>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		u2phy0: usb2phy@e450 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe450 0x10>;
+			clocks = <&cru SCLK_USB2PHY0_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy0_480m";
+			status = "disabled";
+
+			u2phy0_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy0_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+
+		u2phy1: usb2phy@e460 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe460 0x10>;
+			clocks = <&cru SCLK_USB2PHY1_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy1_480m";
+			status = "disabled";
+
+			u2phy1_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy1_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+
+		emmc_phy: phy@f780 {
+			compatible = "rockchip,rk3399-emmc-phy";
+			reg = <0xf780 0x24>;
+			clocks = <&sdhci>;
+			clock-names = "emmcclk";
+			drive-impedance-ohm = <50>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie_phy: pcie-phy {
+			compatible = "rockchip,rk3399-pcie-phy";
+			clocks = <&cru SCLK_PCIEPHY_REF>;
+			clock-names = "refclk";
+			#phy-cells = <1>;
+			resets = <&cru SRST_PCIEPHY>;
+			reset-names = "phy";
+			status = "disabled";
+		};
+	};
+
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		power-domains = <&power RK3399_PD_TCPD0>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		power-domains = <&power RK3399_PD_TCPD1>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	watchdog@ff848000 {
+		compatible = "rockchip,rk3399-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff848000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	rktimer: rktimer@ff850000 {
+		compatible = "rockchip,rk3399-timer";
+		reg = <0x0 0xff850000 0x0 0x1000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+		clock-names = "pclk", "timer";
+	};
+
+	spdif: spdif@ff870000 {
+		compatible = "rockchip,rk3399-spdif";
+		reg = <0x0 0xff870000 0x0 0x1000>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 7>;
+		dma-names = "tx";
+		clock-names = "mclk", "hclk";
+		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s0: i2s@ff880000 {
+		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff880000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
+		pinctrl-names = "bclk_on", "bclk_off";
+		pinctrl-0 = <&i2s0_8ch_bus>;
+		pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@ff890000 {
+		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff890000 0x0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 2>, <&dmac_bus 3>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_2ch_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@ff8a0000 {
+		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff8a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 4>, <&dmac_bus 5>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff8f0000 {
+		compatible = "rockchip,rk3399-vop-lit";
+		reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		assigned-clock-rates = <400000000>, <100000000>;
+		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		iommus = <&vopl_mmu>;
+		power-domains = <&power RK3399_PD_VOPL>;
+		resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopl_out_mipi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
+
+			vopl_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopl>;
+			};
+
+			vopl_out_hdmi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&hdmi_in_vopl>;
+			};
+
+			vopl_out_mipi1: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi1_in_vopl>;
+			};
+
+			vopl_out_dp: endpoint@4 {
+				reg = <4>;
+				remote-endpoint = <&dp_in_vopl>;
+			};
+		};
+	};
+
+	vopl_mmu: iommu@ff8f3f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff8f3f00 0x0 0x100>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VOPL>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopb: vop@ff900000 {
+		compatible = "rockchip,rk3399-vop-big";
+		reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+		assigned-clock-rates = <400000000>, <100000000>;
+		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		iommus = <&vopb_mmu>;
+		power-domains = <&power RK3399_PD_VOPB>;
+		resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopb_out_edp: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&edp_in_vopb>;
+			};
+
+			vopb_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
+
+			vopb_out_hdmi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&hdmi_in_vopb>;
+			};
+
+			vopb_out_mipi1: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi1_in_vopb>;
+			};
+
+			vopb_out_dp: endpoint@4 {
+				reg = <4>;
+				remote-endpoint = <&dp_in_vopb>;
+			};
+		};
+	};
+
+	vopb_mmu: iommu@ff903f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff903f00 0x0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VOPB>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp0: isp0@ff910000 {
+		compatible = "rockchip,rk3399-cif-isp";
+		reg = <0x0 0xff910000 0x0 0x4000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_ISP0>,
+			 <&cru ACLK_ISP0_WRAPPER>,
+			 <&cru HCLK_ISP0_WRAPPER>;
+		clock-names = "isp", "aclk", "hclk";
+		iommus = <&isp0_mmu>;
+		phys = <&mipi_dphy_rx0>;
+		phy-names = "dphy";
+		power-domains = <&power RK3399_PD_ISP0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	isp0_mmu: iommu@ff914000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_ISP0>;
+		rockchip,disable-mmu-reset;
+	};
+
+	isp1: isp1@ff920000 {
+		compatible = "rockchip,rk3399-cif-isp";
+		reg = <0x0 0xff920000 0x0 0x4000>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_ISP1>,
+			 <&cru ACLK_ISP1_WRAPPER>,
+			 <&cru HCLK_ISP1_WRAPPER>;
+		clock-names = "isp", "aclk", "hclk";
+		iommus = <&isp1_mmu>;
+		phys = <&mipi_dsi1>;
+		phy-names = "dphy";
+		power-domains = <&power RK3399_PD_ISP1>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	isp1_mmu: iommu@ff924000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_ISP1>;
+		rockchip,disable-mmu-reset;
+	};
+
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "hdmi-sound";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+
+	hdmi: hdmi@ff940000 {
+		compatible = "rockchip,rk3399-dw-hdmi";
+		reg = <0x0 0xff940000 0x0 0x20000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_HDMI_CTRL>,
+			 <&cru SCLK_HDMI_SFR>,
+			 <&cru SCLK_HDMI_CEC>,
+			 <&cru PCLK_VIO_GRF>,
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "ref";
+		power-domains = <&power RK3399_PD_HDCP>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_hdmi>;
+				};
+				hdmi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	mipi_dsi: dsi@ff960000 {
+		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff960000 0x0 0x8000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
+			 <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
+		power-domains = <&power RK3399_PD_VIO>;
+		resets = <&cru SRST_P_MIPI_DSI0>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+
+			mipi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	mipi_dsi1: dsi@ff968000 {
+		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff968000 0x0 0x8000>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>,
+			 <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
+		power-domains = <&power RK3399_PD_VIO>;
+		resets = <&cru SRST_P_MIPI_DSI1>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#phy-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi1_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mipi1_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi1>;
+				};
+
+				mipi1_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi1>;
+				};
+			};
+
+			mipi1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	edp: dp@ff970000 {
+		compatible = "rockchip,rk3399-edp";
+		reg = <0x0 0xff970000 0x0 0x8000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
+		clock-names = "dp", "pclk", "grf";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_hpd>;
+		power-domains = <&power RK3399_PD_EDP>;
+		resets = <&cru SRST_P_EDP_CTRL>;
+		reset-names = "dp";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+
+			edp_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	gpu: gpu@ff9a0000 {
+		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
+		reg = <0x0 0xff9a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru ACLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power RK3399_PD_GPU>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3399-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff720000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff720000 0x0 0x100>;
+			clocks = <&pmucru PCLK_GPIO0_PMU>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio1: gpio@ff730000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff730000 0x0 0x100>;
+			clocks = <&pmucru PCLK_GPIO1_PMU>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio2: gpio@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff780000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio3: gpio@ff788000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff788000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO3>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio4: gpio@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff790000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO4>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_13ma: pcfg-pull-none-13ma {
+			bias-disable;
+			drive-strength = <13>;
+		};
+
+		pcfg_pull_none_18ma: pcfg-pull-none-18ma {
+			bias-disable;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_none_20ma: pcfg-pull-none-20ma {
+			bias-disable;
+			drive-strength = <20>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_18ma: pcfg-pull-up-18ma {
+			bias-pull-up;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_up_20ma: pcfg-pull-up-20ma {
+			bias-pull-up;
+			drive-strength = <20>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_8ma: pcfg-pull-down-8ma {
+			bias-pull-down;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_down_12ma: pcfg-pull-down-12ma {
+			bias-pull-down;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_down_18ma: pcfg-pull-down-18ma {
+			bias-pull-down;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_down_20ma: pcfg-pull-down-20ma {
+			bias-pull-down;
+			drive-strength = <20>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_enable: pcfg-input-enable {
+			input-enable;
+		};
+
+		pcfg_input_pull_up: pcfg-input-pull-up {
+			input-enable;
+			bias-pull-up;
+		};
+
+		pcfg_input_pull_down: pcfg-input-pull-down {
+			input-enable;
+			bias-pull-down;
+		};
+
+		clock {
+			clk_32k: clk-32k {
+				rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+			};
+		};
+
+		cif {
+			cif_clkin: cif-clkin {
+				rockchip,pins =
+					<2 RK_PB2 3 &pcfg_pull_none>;
+			};
+
+			cif_clkouta: cif-clkouta {
+				rockchip,pins =
+					<2 RK_PB3 3 &pcfg_pull_none>;
+			};
+		};
+
+		edp {
+			edp_hpd: edp-hpd {
+				rockchip,pins =
+					<4 RK_PC7 2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<3 RK_PC1 1 &pcfg_pull_none_13ma>,
+					/* mac_rxclk */
+					<3 RK_PB6 1 &pcfg_pull_none>,
+					/* mac_mdio */
+					<3 RK_PB5 1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 RK_PB4 1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 RK_PB3 1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 RK_PB1 1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 RK_PB0 1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 RK_PA7 1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 RK_PA6 1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 RK_PA5 1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 RK_PA4 1 &pcfg_pull_none_13ma>,
+					/* mac_rxd3 */
+					<3 RK_PA3 1 &pcfg_pull_none>,
+					/* mac_rxd2 */
+					<3 RK_PA2 1 &pcfg_pull_none>,
+					/* mac_txd3 */
+					<3 RK_PA1 1 &pcfg_pull_none_13ma>,
+					/* mac_txd2 */
+					<3 RK_PA0 1 &pcfg_pull_none_13ma>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					/* mac_mdio */
+					<3 RK_PB5 1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 RK_PB4 1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 RK_PB3 1 &pcfg_pull_none>,
+					/* mac_rxer */
+					<3 RK_PB2 1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 RK_PB1 1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 RK_PB0 1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 RK_PA7 1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 RK_PA6 1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 RK_PA5 1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 RK_PA4 1 &pcfg_pull_none_13ma>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins =
+					<1 RK_PB7 2 &pcfg_pull_none>,
+					<1 RK_PC0 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins =
+					<4 RK_PA2 1 &pcfg_pull_none>,
+					<4 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins =
+					<2 RK_PA1 2 &pcfg_pull_none_12ma>,
+					<2 RK_PA0 2 &pcfg_pull_none_12ma>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins =
+					<4 RK_PC1 1 &pcfg_pull_none>,
+					<4 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins =
+					<1 RK_PB4 1 &pcfg_pull_none>,
+					<1 RK_PB3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins =
+					<3 RK_PB3 2 &pcfg_pull_none>,
+					<3 RK_PB2 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c6 {
+			i2c6_xfer: i2c6-xfer {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none>,
+					<2 RK_PB1 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c7 {
+			i2c7_xfer: i2c7-xfer {
+				rockchip,pins =
+					<2 RK_PB0 2 &pcfg_pull_none>,
+					<2 RK_PA7 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c8 {
+			i2c8_xfer: i2c8-xfer {
+				rockchip,pins =
+					<1 RK_PC5 1 &pcfg_pull_none>,
+					<1 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s0 {
+			i2s0_2ch_bus: i2s0-2ch-bus {
+				rockchip,pins =
+					<3 RK_PD0 1 &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off {
+				rockchip,pins =
+					<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_bus: i2s0-8ch-bus {
+				rockchip,pins =
+					<3 RK_PD0 1 &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD4 1 &pcfg_pull_none>,
+					<3 RK_PD5 1 &pcfg_pull_none>,
+					<3 RK_PD6 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off {
+				rockchip,pins =
+					<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD4 1 &pcfg_pull_none>,
+					<3 RK_PD5 1 &pcfg_pull_none>,
+					<3 RK_PD6 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s1 {
+			i2s1_2ch_bus: i2s1-2ch-bus {
+				rockchip,pins =
+					<4 RK_PA3 1 &pcfg_pull_none>,
+					<4 RK_PA4 1 &pcfg_pull_none>,
+					<4 RK_PA5 1 &pcfg_pull_none>,
+					<4 RK_PA6 1 &pcfg_pull_none>,
+					<4 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off {
+				rockchip,pins =
+					<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PA4 1 &pcfg_pull_none>,
+					<4 RK_PA5 1 &pcfg_pull_none>,
+					<4 RK_PA6 1 &pcfg_pull_none>,
+					<4 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdio0 {
+			sdio0_bus1: sdio0-bus1 {
+				rockchip,pins =
+					<2 RK_PC4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bus4: sdio0-bus4 {
+				rockchip,pins =
+					<2 RK_PC4 1 &pcfg_pull_up>,
+					<2 RK_PC5 1 &pcfg_pull_up>,
+					<2 RK_PC6 1 &pcfg_pull_up>,
+					<2 RK_PC7 1 &pcfg_pull_up>;
+			};
+
+			sdio0_cmd: sdio0-cmd {
+				rockchip,pins =
+					<2 RK_PD0 1 &pcfg_pull_up>;
+			};
+
+			sdio0_clk: sdio0-clk {
+				rockchip,pins =
+					<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			sdio0_cd: sdio0-cd {
+				rockchip,pins =
+					<2 RK_PD2 1 &pcfg_pull_up>;
+			};
+
+			sdio0_pwr: sdio0-pwr {
+				rockchip,pins =
+					<2 RK_PD3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bkpwr: sdio0-bkpwr {
+				rockchip,pins =
+					<2 RK_PD4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_wp: sdio0-wp {
+				rockchip,pins =
+					<0 RK_PA3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_int: sdio0-int {
+				rockchip,pins =
+					<0 RK_PA4 1 &pcfg_pull_up>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins =
+					<4 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins =
+					<4 RK_PB0 1 &pcfg_pull_up>,
+					<4 RK_PB1 1 &pcfg_pull_up>,
+					<4 RK_PB2 1 &pcfg_pull_up>,
+					<4 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins =
+					<4 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins =
+					<4 RK_PB5 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins =
+					<0 RK_PA7 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_wp: sdmmc-wp {
+				rockchip,pins =
+					<0 RK_PB0 1 &pcfg_pull_up>;
+			};
+		};
+
+		suspend {
+			ap_pwroff: ap-pwroff {
+				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
+			};
+
+			ddrio_pwroff: ddrio-pwroff {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif {
+			spdif_bus: spdif-bus {
+				rockchip,pins =
+					<4 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			spdif_bus_1: spdif-bus-1 {
+				rockchip,pins =
+					<3 RK_PC0 3 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins =
+					<3 RK_PA6 2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins =
+					<3 RK_PA7 2 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins =
+					<3 RK_PB0 2 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins =
+					<3 RK_PA5 2 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins =
+					<3 RK_PA4 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins =
+					<1 RK_PB1 2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins =
+					<1 RK_PB2 2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins =
+					<1 RK_PA7 2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins =
+					<1 RK_PB0 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi2 {
+			spi2_clk: spi2-clk {
+				rockchip,pins =
+					<2 RK_PB3 1 &pcfg_pull_up>;
+			};
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins =
+					<2 RK_PB4 1 &pcfg_pull_up>;
+			};
+			spi2_rx: spi2-rx {
+				rockchip,pins =
+					<2 RK_PB1 1 &pcfg_pull_up>;
+			};
+			spi2_tx: spi2-tx {
+				rockchip,pins =
+					<2 RK_PB2 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi3 {
+			spi3_clk: spi3-clk {
+				rockchip,pins =
+					<1 RK_PC1 1 &pcfg_pull_up>;
+			};
+			spi3_cs0: spi3-cs0 {
+				rockchip,pins =
+					<1 RK_PC2 1 &pcfg_pull_up>;
+			};
+			spi3_rx: spi3-rx {
+				rockchip,pins =
+					<1 RK_PB7 1 &pcfg_pull_up>;
+			};
+			spi3_tx: spi3-tx {
+				rockchip,pins =
+					<1 RK_PC0 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi4 {
+			spi4_clk: spi4-clk {
+				rockchip,pins =
+					<3 RK_PA2 2 &pcfg_pull_up>;
+			};
+			spi4_cs0: spi4-cs0 {
+				rockchip,pins =
+					<3 RK_PA3 2 &pcfg_pull_up>;
+			};
+			spi4_rx: spi4-rx {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up>;
+			};
+			spi4_tx: spi4-tx {
+				rockchip,pins =
+					<3 RK_PA1 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi5 {
+			spi5_clk: spi5-clk {
+				rockchip,pins =
+					<2 RK_PC6 2 &pcfg_pull_up>;
+			};
+			spi5_cs0: spi5-cs0 {
+				rockchip,pins =
+					<2 RK_PC7 2 &pcfg_pull_up>;
+			};
+			spi5_rx: spi5-rx {
+				rockchip,pins =
+					<2 RK_PC4 2 &pcfg_pull_up>;
+			};
+			spi5_tx: spi5-tx {
+				rockchip,pins =
+					<2 RK_PC5 2 &pcfg_pull_up>;
+			};
+		};
+
+		testclk {
+			test_clkout0: test-clkout0 {
+				rockchip,pins =
+					<0 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			test_clkout1: test-clkout1 {
+				rockchip,pins =
+					<2 RK_PD1 2 &pcfg_pull_none>;
+			};
+
+			test_clkout2: test-clkout2 {
+				rockchip,pins =
+					<0 RK_PB0 3 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_pin: otp-pin {
+				rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins =
+					<2 RK_PC0 1 &pcfg_pull_up>,
+					<2 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins =
+					<2 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins =
+					<2 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins =
+					<3 RK_PB4 2 &pcfg_pull_up>,
+					<3 RK_PB5 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2a {
+			uart2a_xfer: uart2a-xfer {
+				rockchip,pins =
+					<4 RK_PB0 2 &pcfg_pull_up>,
+					<4 RK_PB1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2b {
+			uart2b_xfer: uart2b-xfer {
+				rockchip,pins =
+					<4 RK_PC0 2 &pcfg_pull_up>,
+					<4 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2c {
+			uart2c_xfer: uart2c-xfer {
+				rockchip,pins =
+					<4 RK_PC3 1 &pcfg_pull_up>,
+					<4 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins =
+					<3 RK_PB6 2 &pcfg_pull_up>,
+					<3 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins =
+					<3 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins =
+					<3 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins =
+					<1 RK_PA7 1 &pcfg_pull_up>,
+					<1 RK_PB0 1 &pcfg_pull_none>;
+			};
+		};
+
+		uarthdcp {
+			uarthdcp_xfer: uarthdcp-xfer {
+				rockchip,pins =
+					<4 RK_PC5 2 &pcfg_pull_up>,
+					<4 RK_PC6 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins =
+					<4 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			pwm0_pin_pull_down: pwm0-pin-pull-down {
+				rockchip,pins =
+					<4 RK_PC2 1 &pcfg_pull_down>;
+			};
+
+			vop0_pwm_pin: vop0-pwm-pin {
+				rockchip,pins =
+					<4 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			vop1_pwm_pin: vop1-pwm-pin {
+				rockchip,pins =
+					<4 RK_PC2 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins =
+					<4 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			pwm1_pin_pull_down: pwm1-pin-pull-down {
+				rockchip,pins =
+					<4 RK_PC6 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins =
+					<1 RK_PC3 1 &pcfg_pull_none>;
+			};
+
+			pwm2_pin_pull_down: pwm2-pin-pull-down {
+				rockchip,pins =
+					<1 RK_PC3 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm3a {
+			pwm3a_pin: pwm3a-pin {
+				rockchip,pins =
+					<0 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3b {
+			pwm3b_pin: pwm3b-pin {
+				rockchip,pins =
+					<1 RK_PB6 1 &pcfg_pull_none>;
+			};
+		};
+
+		hdmi {
+			hdmi_i2c_xfer: hdmi-i2c-xfer {
+				rockchip,pins =
+					<4 RK_PC1 3 &pcfg_pull_none>,
+					<4 RK_PC0 3 &pcfg_pull_none>;
+			};
+
+			hdmi_cec: hdmi-cec {
+				rockchip,pins =
+					<4 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pcie {
+			pcie_clkreqn_cpm: pci-clkreqn-cpm {
+				rockchip,pins =
+					<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			pcie_clkreqnb_cpm: pci-clkreqnb-cpm {
+				rockchip,pins =
+					<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
new file mode 100644
index 0000000000..c58fb7658d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include <arm/rockchip/rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3399pro-vmarc-som.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi N10";
+	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
+		     "rockchip,rk3399pro";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
new file mode 100644
index 0000000000..8b8992a8e9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	vcc3v3_pcie: vcc-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	phy-supply = <&vcc_lan>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <180>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1850000>;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <140>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	gpio1830-supply = <&vccio_3v0>;
+	sdmmc-supply = <&vccio_sd>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcca_0v9>;	/* VCC_0V9_S0 */
+	vpcie1v8-supply = <&vcca_1v8>;	/* VCC_1V8_S0 */
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr: pcie-pwr {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdio_pwrseq {
+	/*
+	 * On the module itself this is one of these (depending
+	 * on the actual card populated):
+	 * - SDIO_RESET_L_WL_REG_ON
+	 * - PDN (power down when low)
+	 */
+	reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	max-frequency = <150000000>;
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_oc>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_oc>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
new file mode 100644
index 0000000000..bb5ebf6608
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+
+#include "rk3399.dtsi"
+
+/ {
+	compatible = "rockchip,rk3399pro";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie_phy {
+	status = "okay";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
new file mode 100644
index 0000000000..8aa93c646b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353P";
+	compatible = "anbernic,rg353p", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&i2c2 {
+	pintctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+
+	touch@1a {
+		compatible = "hynitron,cst340";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&touch_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <640>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touch {
+		touch_rst: touch-rst {
+			rockchip,pins =
+				<4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts
new file mode 100644
index 0000000000..b211973e36
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353PS";
+	compatible = "anbernic,rg353ps", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&panel {
+	compatible = "anbernic,rg353v-panel-v2";
+	iovcc-supply = <&vcc3v3_lcd0_n>;
+	vcc-supply = <&vcc3v3_lcd0_n>;
+	/delete-property/ vdd-supply;
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
new file mode 100644
index 0000000000..f49ce29ba5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353V";
+	compatible = "anbernic,rg353v", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for headphones. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&i2c2 {
+	pintctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+
+	touch@1a {
+		compatible = "hynitron,cst340";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&touch_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <640>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&pinctrl {
+	touch {
+		touch_rst: touch-rst {
+			rockchip,pins =
+				<4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts
new file mode 100644
index 0000000000..a7dc462fe2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353VS";
+	compatible = "anbernic,rg353vs", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for headphones. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
new file mode 100644
index 0000000000..2a2821f4c5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rgxx3.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <241500000>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-a {
+		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+		label = "EAST";
+		linux,code = <BTN_EAST>;
+	};
+
+	button-left {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-LEFT";
+		linux,code = <BTN_DPAD_LEFT>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-y {
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		label = "WEST";
+		linux,code = <BTN_WEST>;
+	};
+};
+
+&i2c0 {
+	/* This hardware is physically present but unused. */
+	power-monitor@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
new file mode 100644
index 0000000000..c763c7f3b1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rgxx3.dtsi"
+
+/ {
+	model = "RG503";
+	compatible = "anbernic,rg503", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =	<4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	gpio_spi: spi {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <0>;
+
+		panel@0 {
+			compatible = "samsung,ams495qa01";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lcd_reset>;
+			reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_3v3>;
+
+			port {
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+		};
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <500000000>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-a {
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		label = "EAST";
+		linux,code = <BTN_EAST>;
+	};
+
+	button-left {
+		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		label = "DPAD-LEFT";
+		linux,code = <BTN_DPAD_LEFT>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-y {
+		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+		label = "WEST";
+		linux,code = <BTN_WEST>;
+	};
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_reset: lcd-reset {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-spi {
+		spi_pins: spi-pins {
+			rockchip,pins =
+				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
new file mode 100644
index 0000000000..8cbf3d9a4f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_keys: adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <60>;
+
+		/*
+		 * Button is mapped to F key in BSP kernel, but
+		 * according to input guidelines it should be mode.
+		 */
+		button-mode {
+			label = "MODE";
+			linux,code = <BTN_MODE>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-b {
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-select {
+			gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-up {
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds: pwm-leds {
+		compatible = "pwm-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			max-brightness = <255>;
+			pwms = <&pwm6 0 25000 0>;
+		};
+
+		amber_led: led-1 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_CHARGING;
+			max-brightness = <255>;
+			pwms = <&pwm7 0 25000 0>;
+		};
+
+		red_led: led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+			pwms = <&pwm0 0 25000 0>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&vcc_lcd_h>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_lcd0_n";
+		vin-supply = <&vcc_3v3>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+
+	vibrator: pwm-vibrator {
+		compatible = "pwm-vibrator";
+		pwm-names = "enable";
+		pwms = <&pwm5 0 1000000000 0>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu: regulator@40 {
+		compatible = "fcs,fan53555";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	/* Unknown/unused device at 0x3c */
+	status = "disabled";
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-btns {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+			<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+			<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joy-mux {
+		joy_mux_en: joy-mux-en {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc3v3-lcd {
+		vcc_lcd_h: vcc-lcd-h {
+			rockchip,pins =
+				<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm5 {
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc1v8_dvp>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * Lack the schematics to verify, but port works as a peripheral
+ * (and not a host or OTG port).
+ */
+&usb_host0_xhci {
+	dr_mode = "peripheral";
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
new file mode 100644
index 0000000000..0c18406e4c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Piotr Oniszczuk piotr.oniszczuk@gmail.com
+ * Based on Quartz64 DT by: Peter Geis pgwipeout@gmail.com
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Rockchip RK3566 BOX DEMO Board";
+	compatible = "rockchip,rk3566-box-demo", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		linux,rc-map-name = "rc-beelink-gs1";
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_work: led-0 {
+			gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_en>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&pmucru CLK_RTC_32K>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h &wifi_32k>;
+		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+
+	vcc12v0_dcin: regulator-vcc12v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v0_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v0_dcin>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v0_dcin>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2_otg: regulator-vcc5v0-usb2-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb2_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcca_1v8: regulator-vcca-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdda_0v9: regulator-vdda-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_fixed: regulator-vdd-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_cpu: regulator-vdd-cpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_logic";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		    &gmac1m1_tx_bus2
+		    &gmac1m1_rx_bus2
+		    &gmac1m1_rgmii_clk
+		    &gmac1m1_rgmii_bus
+		    &gmac1m1_clkinout>;
+	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	tx_delay = <0x4f>;
+	rx_delay = <0x2d>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+	};
+};
+
+&hdmi {
+	assigned-clocks = <&cru CLK_HDMI_CEC>;
+	assigned-clock-rates = <32768>;
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_h: wifi-host-wake-l {
+			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_32k: wifi-32k {
+			rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb2_otg_en: vcc5v0_usb2_otg_en {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	led {
+		led_work_en: led_work_en {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio2-supply = <&vcc_3v3>;
+	vccio1-supply = <&vcc_3v3>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcca_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcca_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	/* WiFi & BT combo module AMPAK AP6398S */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <150000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcca_1v8>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_h>;
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&pmucru CLK_RTC_32K>;
+		clock-names = "ext_clock";
+		device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vpu {
+	status = "okay";
+};
+
+&vdpu_mmu {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb2_otg>;
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
new file mode 100644
index 0000000000..6ecdf5d283
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -0,0 +1,592 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "EmbedFire LubanCat 1";
+	compatible = "embedfire,lubancat-1", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		sys_led: sys-led {
+			label = "sys_led";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+			gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sys_led_pin>;
+		};
+	};
+
+	usb_5v: usb-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&usb_5v>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb20_host_en>;
+		regulator-name = "vcc5v0_usb20_host";
+		regulator-always-on;
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb30_host_en>;
+		regulator-name = "vcc5v0_usb30_host";
+		regulator-always-on;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	clock_in_out = "output";
+	snps,reset-gpio = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 75ms, 100ms */
+	snps,reset-delays-us = <0 75000 100000>;
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+			&gmac1m1_tx_bus2_level3
+			&gmac1m1_rx_bus2
+			&gmac1m1_rgmii_clk_level2
+			&gmac1m1_rgmii_bus_level3>;
+	tx_delay = <0x1a>;
+	rx_delay = <0x0c>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie2x1 {
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		sys_led_pin: sys-status-led-pin {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&sdhci {
+	assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
+	assigned-clock-rates = <200000000>, <24000000>, <200000000>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	supports-emmc;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	supports-sd;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+/* USB OTG/USB Host_1 USB 2.0 Comb */
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* USB Host_2/USB Host_3 USB 2.0 Comb */
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+/* USB3.0 Host */
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts
new file mode 100644
index 0000000000..5b0b7ebf9f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinenote.dtsi"
+
+/ {
+	model = "Pine64 PineNote v1.1";
+	compatible = "pine64,pinenote-v1.1", "pine64,pinenote", "rockchip,rk3566";
+};
+
+&pmu_io_domains {
+	vccio7-supply = <&vcc_1v8>;
+};
+
+&spk_amp {
+	VCC-supply = <&dcdc_boost>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts
new file mode 100644
index 0000000000..6bbc4c675d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinenote.dtsi"
+
+/ {
+	model = "Pine64 PineNote v1.2";
+	compatible = "pine64,pinenote-v1.2", "pine64,pinenote", "rockchip,rk3566";
+};
+
+&pmu_io_domains {
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&spk_amp {
+	VCC-supply = <&vcc_bat>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
new file mode 100644
index 0000000000..d899087bf0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -0,0 +1,717 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1750000>;
+
+		button-recovery {
+			label = "recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <6>;
+		#sound-dai-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&hall_int_l>;
+		pinctrl-names = "default";
+
+		switch-cover {
+			label = "cover";
+			gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pin>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_CHARGING;
+			gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "PineNote";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Speaker", "Internal Speakers";
+		simple-audio-card,routing = "Headphones", "HPOL",
+					    "Headphones", "HPOR",
+					    "Internal Speakers", "Speaker Amp OUTL",
+					    "Internal Speakers", "Speaker Amp OUTR",
+					    "Speaker Amp INL", "HPOL",
+					    "Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			bitclock-master = <&link0_cpu>;
+			format = "i2s";
+			frame-master = <&link0_cpu>;
+			mclk-fs = <256>;
+
+			link0_cpu: cpu {
+				sound-dai = <&i2s1_8ch>;
+			};
+
+			link0_codec: codec {
+				sound-dai = <&rk817>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			bitclock-master = <&link1_cpu>;
+			format = "pdm";
+			frame-master = <&link1_cpu>;
+
+			link1_cpu: cpu {
+				sound-dai = <&pdm>;
+			};
+
+			link1_codec: codec {
+				sound-dai = <&dmic_codec>;
+			};
+		};
+	};
+
+	vbat_4g: vbat-4g {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat_4g";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		/* powered by vcc_bat, enabled by vbat_4g_en */
+		vin-supply = <&vbat_4g_en>;
+	};
+
+	vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* powered by vcc_sys, enabled by vcc_1v8_en */
+		vin-supply = <&vcc_1v8_en>;
+	};
+
+	vcc_bat: vcc-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_bat";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_hall_3v3: vcc-hall-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_hall_3v3";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		vin-supply = <&vcc_bat>;
+	};
+
+	vcc_wl: vcc-wl {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wl_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_bat>;
+	};
+
+	vdda_0v9: vdda-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_0v9";
+		regulator-always-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		/* powered by vcc_sys, enabled by vcc_1v8_en */
+		vin-supply = <&vcc_1v8_en>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <0>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-names = "mclk";
+		#clock-cells = <1>;
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>, <&pmic_sleep>;
+		pinctrl-names = "default";
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu_npu: DCDC_REG2 {
+				regulator-name = "vdd_gpu_npu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_pmu: LDO_REG1 {
+				regulator-name = "vcca_1v8_pmu";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/* unused */
+			vdda_0v9_ldo: LDO_REG2 {
+				regulator-name = "vdda_0v9_ldo";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda_0v9_pmu";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* unused */
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc_3v3_pmu";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8_en: LDO_REG7 {
+				regulator-name = "vcc_1v8_en";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vbat_4g_en: LDO_REG8 {
+				regulator-name = "vbat_4g_en";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			sleep_sta_ctl: LDO_REG9 {
+				regulator-name = "sleep_sta_ctl";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-name = "boost";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	digitizer@9 {
+		compatible = "wacom,w9013", "hid-over-i2c";
+		reg = <0x09>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>;
+		hid-descr-addr = <0x1>;
+		pinctrl-0 = <&pen_fwe>, <&pen_irq_l>, <&pen_rst_l>;
+		pinctrl-names = "default";
+		vdd-supply = <&vcc_3v3_pmu>;
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3m1_xfer>;
+	status = "okay";
+
+	led-controller@36 {
+		compatible = "ti,lm3630a";
+		reg = <0x36>;
+		enable-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&backlight_hwen_h>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			label = "backlight_cool";
+			default-brightness = <0>;
+		};
+
+		led@1 {
+			reg = <1>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+		};
+	};
+
+	wusb3801: tcpc@60 {
+		compatible = "willsemi,wusb3801";
+		reg = <0x60>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&tcpc_int_l>;
+		pinctrl-names = "default";
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			vbus-supply = <&otg_switch>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			typec-power-opmode = "default";
+			pd-disable;
+
+			ports {
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					typec_hs_usb2phy0: endpoint {
+						remote-endpoint = <&usb2phy0_typec_hs>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "silan,sc7a20";
+		reg = <0x18>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&accelerometer_int_l>;
+		pinctrl-names = "default";
+		st,drdy-int-pin = <1>;
+		vdd-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_3v3>;
+	};
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_lrcktx>, <&i2s1m0_sclktx>, <&i2s1m0_sdi0>, <&i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pdm {
+	pinctrl-0 = <&pdmm0_clk1>, <&pdmm0_sdi1>, <&pdmm0_sdi2>;
+	/* microphones are on channels 1 and 2 */
+	rockchip,path-map = <1>, <2>, <0>, <3>;
+	status = "okay";
+};
+
+&pinctrl {
+	accelerometer {
+		accelerometer_int_l: accelerometer-int-l {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	backlight {
+		backlight_hwen_h: backlight-hwen-h {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_h: bt-wake-h {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	led {
+		led_pin: led-pin {
+			rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hall {
+		hall_int_l: hall-int-l {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pen {
+		pen_fwe: pen-fwe {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pen_irq_l: pen-irq-l {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pen_rst_l: pen-rst-l {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tcpc {
+		tcpc_int_l: tcpc-int-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vcc-wl {
+		vcc_wl_pin: vcc-wl-pin {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3_pmu>;
+	pmuio2-supply = <&vcc_3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcca_1v8_pmu>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_clk>, <&sdmmc1_cmd>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_wl>;
+	vqmmc-supply = <&vcca_1v8_pmu>;
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk817 1>;
+		clock-names = "lpo";
+		device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
+		pinctrl-names = "default";
+		vbat-supply = <&vcc_wl>;
+		vddio-supply = <&vcca_1v8_pmu>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+
+	port {
+		usb2phy0_typec_hs: endpoint {
+			remote-endpoint = <&typec_hs_usb2phy0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
new file mode 100644
index 0000000000..854d02b46e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Pine64 RK3566 Quartz64-A Board";
+	compatible = "pine64,quartz64-a", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	fan: gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      4500 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fan_en_h>;
+		#cooling-cells = <2>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-work {
+			label = "work-led";
+			default-state = "off";
+			gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led_enable_h>;
+			retain-state-suspended;
+		};
+
+		led-diy {
+			label = "diy-led";
+			default-state = "on";
+			gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&diy_led_enable_h>;
+			retain-state-suspended;
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK817";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+		reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+
+	vcc12v_dcin: vcc12v_dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* vbus feeds the rk817 usb input.
+	 * With no battery attached, also feeds vcc_bat+
+	 * via ON/OFF_BAT jumper
+	 */
+	vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie_p";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_usb: vcc5v0_usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	/* all four ports are controlled by one gpio
+	 * the host ports are sourced from vcc5v0_usb
+	 * the otg port is sourced from vcc5v0_midu
+	 */
+	vcc5v0_usb20_host: vcc5v0_usb20_host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb20_host_en>;
+		regulator-name = "vcc5v0_usb20_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_usb20_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dcdc_boost>;
+	};
+
+	vcc3v3_sd: vcc3v3_sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_sd_h>;
+		regulator-boot-on;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	/* sourced from vbus and vcc_bat+ via rk817 sw5 */
+	vcc_sys: vcc_sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		vin-supply = <&vbus>;
+	};
+
+	/* sourced from vcc_sys, sdio module operates internally at 3.3v */
+	vcc_wl: vcc_wl {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_wl";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_hot: cpu_hot {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_3v3>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_clkinout
+		     &gmac1m0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+					regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+/* i2c3 is exposed on con40
+ * pin 3 - i2c3_sda_m0, pullup to vcc_3v3
+ * pin 5 - i2c3_scl_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_p>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fan {
+		fan_en_h: fan-en-h {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		work_led_enable_h: work-led-enable-h {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_enable_h: diy-led-enable-h {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc_sd {
+		vcc_sd_h: vcc-sd-h {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_wl>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&fspi_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+/* spdif is exposed on con40 pin 18 */
+&spdif {
+	status = "okay";
+};
+
+/* spi1 is exposed on con40
+ * pin 11 - spi1_mosi_m1
+ * pin 13 - spi1_miso_m1
+ * pin 15 - spi1_clk_m1
+ * pin 17 - spi1_cs0_m1
+ */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+/* uart0 is exposed on con40
+ * pin 12 - uart0_tx
+ * pin 14 - uart0_rx
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk817 1>;
+		clock-names = "lpo";
+		host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+		max-speed = <3000000>;
+	};
+};
+
+/* uart2 is exposed on con40
+ * pin 8 - uart2_tx_m0_debug
+ * pin 10 - uart2_rx_m0_debug
+ */
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* usb3 controller is muxed with sata1 */
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb20_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
new file mode 100644
index 0000000000..2d92713be2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -0,0 +1,737 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Pine64 RK3566 Quartz64-B Board";
+	compatible = "pine64,quartz64-b", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+		mmc2 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			label = "user-led";
+			default-state = "on";
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_enable_h>;
+			retain-state-suspended;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+	};
+
+	vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie_p";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_in: vcc5v0-in-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_in";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_in>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb30_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_clkinout
+		     &gmac1m1_rgmii_bus>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f, also works well here */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x24>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-boot-on;
+				regulator-name = "vcc_3v3";
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+			};
+		};
+	};
+};
+
+/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+};
+
+/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m1_xfer>;
+	status = "okay";
+};
+
+/*
+ * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
+ * pin 27 - i2c4_sda_m0
+ * pin 28 - i2c4_scl_m0
+ */
+&i2c4 {
+	status = "okay";
+};
+
+/*
+ * i2c5_m0 is exposed on PI40
+ * pin 29 - i2c5_scl_m0
+ * pin 31 - i2c5_sda_m0
+ */
+&i2c5 {
+	status = "disabled";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_p>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led_enable_h: user-led-enable-h {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&fspi_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+	};
+};
+
+/*
+ * uart2_m0 is exposed on PI40
+ * pin 8  - uart2_tx_m0
+ * pin 10 - uart2_rx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
new file mode 100644
index 0000000000..1b1c67d5b1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Radxa Limited
+ * Copyright (c) 2022 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+#include "rk3566-radxa-cm3.dtsi"
+
+/ {
+	model = "Radxa Compute Module 3(CM3) IO Board";
+	compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
+
+	aliases {
+		mmc1 = &sdmmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_ACTIVITY;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pi_nled_activity>;
+		};
+	};
+
+	vcc5v0_usb30: vcc5v0-usb30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb30";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb30_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcca1v8_image: vcca1v8-image-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8_image";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_p>;
+	};
+
+	vdda0v9_image: vdda0v9-image-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca0v9_image";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vdda_0v9>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "input";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_rgmii_bus
+		     &gmac1m0_clkinout>;
+	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x46>;
+	rx_delay = <0x2e>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	gmac1 {
+		gmac1m0_miim: gmac1m0-miim {
+			rockchip,pins =
+				/* gmac1_mdcm0 */
+				<3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_mdiom0 */
+				<3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
+			rockchip,pins =
+				/* gmac1_rxd0m0 */
+				<3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_rxd1m0 */
+				<3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_rxdvcrsm0 */
+				<3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
+			rockchip,pins =
+				/* gmac1_txd0m0 */
+				<3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txd1m0 */
+				<3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txenm0 */
+				<3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
+			rockchip,pins =
+				/* gmac1_rxclkm0 */
+				<3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txclkm0 */
+				<3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
+			rockchip,pins =
+				/* gmac1_rxd2m0 */
+				<3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_rxd3m0 */
+				<3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txd2m0 */
+				<3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txd3m0 */
+				<3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_clkinout: gmac1m0-clkinout {
+			rockchip,pins =
+				/* gmac1_mclkinoutm0 */
+				<3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
+		};
+	};
+
+	leds {
+		pi_nled_activity: pi-nled-activity {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdcard {
+		sdmmc_pwren: sdmmc-pwren {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb30_en_h: vcc5v0-host-en-h {
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30>;
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
new file mode 100644
index 0000000000..45de2630bb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Radxa Limited
+ * Copyright (c) 2022 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "radxa,cm3", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "timer";
+			default-state = "on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led2>;
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v8: vcc-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_p>;
+	};
+
+	vcc_3v3: vcc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcca_1v8: vcca-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_p>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_npu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		clock-output-names = "rk817-clkout1", "rk817-clkout2";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu_npu: DCDC_REG2 {
+				regulator-name = "vdd_gpu_npu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8_p: LDO_REG7 {
+				regulator-name = "vcc_1v8_p";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+		};
+	};
+};
+
+&pinctrl {
+	bluetooth {
+		bt_host_wake_h: bt-host-wake-h {
+			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_h: bt-wake-host-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		user_led2: user-led2 {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_h: wifi-host-wake-h {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc_3v3>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43455-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_h>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk817 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
+		vbat-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
new file mode 100644
index 0000000000..938092fce1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -0,0 +1,699 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Firefly Station M2";
+	compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+		mmc2 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			label = "user-led";
+			default-state = "on";
+			gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_enable_h>;
+			retain-state-suspended;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "STATION-M2-FRONT";
+		simple-audio-card,mclk-fs = <256>;
+		status = "okay";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+
+	usb_5v: usb-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&usb_5v>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb30_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_clkinout
+		     &gmac1m0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x24>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		codec {
+			mic-in-differential;
+		};
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-boot-on;
+				regulator-name = "vcc3v3";
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m0_xfer>;
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx
+			&i2s1m0_lrcktx &i2s1m0_lrckrx
+			&i2s1m0_sdi0   &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led_enable_h: user-led-enable-h {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
new file mode 100644
index 0000000000..4e49bebf54
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "PINE64 RK3566 SOQuartz on Blade carrier board";
+	compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
+	vcc3v0_sd: vcc3v0-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* labeled VCC_SSD in schematic */
+	vcc3v3_pcie_p: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie_p";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc5v_dcin: vcc5v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	color = <LED_COLOR_ID_RED>;
+	function = LED_FUNCTION_DISK_ACTIVITY;
+	linux,default-trigger = "disk-activity";
+	status = "okay";
+};
+
+&led_work {
+	color = <LED_COLOR_ID_GREEN>;
+	function = LED_FUNCTION_STATUS;
+	linux,default-trigger = "heartbeat";
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc3v3_pcie_p>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+&sdmmc0 {
+	vmmc-supply = <&vcc3v0_sd>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc5v_dcin>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
new file mode 100644
index 0000000000..cddf6cd2fe
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
+	compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled +12v in schematic */
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* labeled +5v in schematic */
+	vcc_5v: vcc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_sd_pwr: vcc-sd-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+/* phy for pcie */
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * the rtc interrupt is tied to PMIC_PWRON,
+	 * it will force reset the board if triggered.
+	 */
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+	};
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	status = "okay";
+};
+
+&led_work {
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+&sdmmc0 {
+	vmmc-supply = <&vcc_sd_pwr>;
+	status = "okay";
+};
+
+/*
+ *  spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc_5v>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
new file mode 100644
index 0000000000..2208dbfb7f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "PINE64 RK3566 SOQuartz on Model A carrier board";
+	compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled DCIN_12V in schematic */
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	/*
+	 * Labelled VCC3V0_SD in schematic to not conflict with PMIC
+	 * regulator, it's 3.3v in actuality
+	 */
+	vcc3v0_sd: vcc3v0-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc12v_pcie: vcc12v-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+/* phy for pcie */
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * the rtc interrupt is tied to PMIC_PWRON,
+	 * it will force reset the board if triggered.
+	 */
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+	};
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	status = "okay";
+};
+
+&led_work {
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+/*
+ * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+
+ * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys,
+ * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards.
+ */
+&sdmmc0 {
+	vmmc-supply = <&vcc3v3_sd>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc5v0_usb>;
+};
+
+&vcc3v3_sd {
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
new file mode 100644
index 0000000000..63bae36b8f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -0,0 +1,685 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Pine64 RK3566 SoQuartz SOM";
+	compatible = "pine64,soquartz", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+		mmc2 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_diy: led-diy {
+			label = "diy-led";
+			default-state = "on";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&diy_led_enable_h>;
+			retain-state-suspended;
+			status = "disabled";
+		};
+
+		led_work: led-work {
+			label = "work-led";
+			default-state = "off";
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led_enable_h>;
+			retain-state-suspended;
+			status = "disabled";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+
+	vbus: vbus-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* sourced from vbus, vbus is provided by the carrier board */
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_3v3>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_clkinout
+		     &gmac1m0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f, also works well here */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	phy-handle = <&rgmii_phy1>;
+	status = "disabled";
+};
+
+&gpio0 {
+	nextrst-hog {
+		gpio-hog;
+		/*
+		 * GPIO_ACTIVE_LOW + output-low here means that the pin is set
+		 * to high, because output-low decides the value pre-inversion.
+		 */
+		gpios = <RK_PA5 GPIO_ACTIVE_LOW>;
+		line-name = "nEXTRST";
+		output-low;
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+					regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_npu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_image";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_image";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				status = "disabled";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+		};
+	};
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "disabled";
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A
+ * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A
+ * pin 35 - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B
+ * pin 45 - i2c4_scl_m1
+ * pin 47 - i2c4_sda_m1
+ */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m1_xfer>;
+	status = "disabled";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A
+ * pin 24 - i2s1_sdi1_m1
+ * pin 25 - i2s1_sdo0_m1
+ * pin 26 - i2s1_lrck_tx_m1
+ * pin 27 - i2s1_sdi0_m1
+ * pin 29 - i2s1_sdi3_m1
+ * pin 30 - i2s1_sdi2_m1
+ * pin 40 - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - i2s1_sdo2_m1
+ * pin 49 - i2s1_sclk_tx_m1
+ * pin 50 - i2s1_mclk_m1
+ * pin 56 - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx
+		     &i2s1m1_lrcktx &i2s1m1_lrckrx
+		     &i2s1m1_sdi0   &i2s1m1_sdi1
+		     &i2s1m1_sdi2   &i2s1m1_sdi3
+		     &i2s1m1_sdo0   &i2s1m1_sdo1
+		     &i2s1m1_sdo2   &i2s1m1_sdo3>;
+	status = "disabled";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		status = "disabled";
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		work_led_enable_h: work-led-enable-h {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_enable_h: diy-led-enable-h {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_clkreq_h: pcie-clkreq-h {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A
+ * pin 94 - saradc_vin3
+ * pin 96 - saradc_vin2
+ */
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "disabled";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "disabled";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A
+ * pin 37 - spi3_cs1_m0
+ * pin 38 - spi3_clk_m0
+ * pin 39 - spi3_cs0_m0
+ * pin 40 - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+	};
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A
+ * pin 51 - uart2_rx_m0
+ * pin 55 - uart2_tx_m0
+ */
+&uart2 {
+	status = "disabled";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A
+ * pin 46 - uart7_tx_m2
+ * pin 47 - uart7_rx_m2
+ */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7m2_xfer>;
+	status = "disabled";
+};
+
+/* dwc3_otg is the only usb port available */
+&usb2phy0 {
+	status = "disabled";
+};
+
+&usb2phy0_otg {
+	status = "disabled";
+};
+
+&usb_host0_xhci {
+	status = "disabled";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
new file mode 100644
index 0000000000..6c4b17d27b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk356x.dtsi"
+
+/ {
+	compatible = "rockchip,rk3566";
+};
+
+&pipegrf {
+	compatible = "rockchip,rk3566-pipe-grf", "syscon";
+};
+
+&power {
+	power-domain@RK3568_PD_PIPE {
+		reg = <RK3568_PD_PIPE>;
+		clocks = <&cru PCLK_PIPE>;
+		pm_qos = <&qos_pcie2x1>,
+			 <&qos_sata1>,
+			 <&qos_sata2>,
+			 <&qos_usb3_0>,
+			 <&qos_usb3_1>;
+		#power-domain-cells = <0>;
+	};
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	extcon = <&usb2phy0>;
+	maximum-speed = "high-speed";
+};
+
+&vop {
+	compatible = "rockchip,rk3566-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
new file mode 100644
index 0000000000..f9127ddfbb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
+	compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin &green_led_pin>;
+
+		blue_led: led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&minipcie_enable_h>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ngffpcie_enable_h>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&combphy0 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy1 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy2 {
+	/* used for SATA */
+	status = "okay";
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x0f>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+
+	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	/* pin 3 (SDA) + 4 (SCL) of header con2 */
+	status = "disabled";
+};
+
+&i2s0_8ch {
+	/* hdmi sound */
+	status = "okay";
+};
+
+&mdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	switch@0 {
+		compatible = "mediatek,mt7531";
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan0";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&gmac0>;
+				phy-mode = "rgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	phy-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	/* M.2 slot */
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ngffpcie_reset_h>;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	/* mPCIe slot */
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&minipcie_reset_h>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		green_led_pin: green-led-pin {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		minipcie_enable_h: minipcie-enable-h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
+		};
+
+		ngffpcie_enable_h: ngffpcie-enable-h {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
+		};
+
+		minipcie_reset_h: minipcie-reset-h {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
+		};
+
+		ngffpcie_reset_h: ngffpcie-reset-h {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm8 {
+	/* fan 5v - gnd - pwm */
+	status = "okay";
+};
+
+&pwm10 {
+	/* pin 7 of header con2 */
+	status = "disabled";
+};
+
+&pwm11 {
+	/* pin 15 of header con2 */
+	status = "disabled";
+};
+
+&pwm12 {
+	/* pin 21 of header con2 */
+	/* shared with uart9 + spi3 */
+	pinctrl-0 = <&pwm12m1_pins>;
+	status = "disabled";
+};
+
+&pwm13 {
+	/* pin 24 of header con2 */
+	/* shared with uart9 */
+	pinctrl-0 = <&pwm13m1_pins>;
+	status = "disabled";
+};
+
+&pwm14 {
+	/* pin 23 of header con2 */
+	/* shared with spi3 */
+	pinctrl-0 = <&pwm14m1_pins>;
+	status = "disabled";
+};
+
+&pwm15 {
+	/* pin 19 of header con2 */
+	/* shared with spi3 */
+	pinctrl-0 = <&pwm15m1_pins>;
+	status = "disabled";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&spi3 {
+	/* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */
+	/* shared with pwm12/14/15 and uart9 */
+	pinctrl-0 = <&spi3m1_pins>;
+	status = "disabled";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart0 {
+	/* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */
+	status = "disabled";
+};
+
+&uart2 {
+	/* debug-uart */
+	status = "okay";
+};
+
+&uart7 {
+	/* pin 11 (TX) + 13 (RX) of header con2 */
+	pinctrl-0 = <&uart7m1_xfer>;
+	status = "disabled";
+};
+
+&uart9 {
+	/* pin 21 (TX) + 24 (RX) of header con2 */
+	/* shared with pwm13 and pwm12/spi3 */
+	pinctrl-0 = <&uart9m1_xfer>;
+	status = "disabled";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	/* USB for PCIe/M2 */
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
new file mode 100644
index 0000000000..19f8fc369b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -0,0 +1,689 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
+	compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_work: led-0 {
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_en>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc3v3_lcd0_n: vcc3v3-lcd0-n {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd0_n";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc3v3_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_lcd0_n_en>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc3v3_lcd1_n: vcc3v3-lcd1-n {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd1_n";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc3v3_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_lcd1_n_en>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		codec {
+			mic-in-differential;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen0: goodix@14 {
+		compatible = "goodix,gt1151";
+		reg = <0x14>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
+		AVDD28-supply = <&vcc3v3_lcd0_n>;
+		irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&vcc3v3_lcd0_n>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	display {
+		vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en {
+			rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>;
+		};
+		vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en {
+			rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_work_en: led_work_en {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	touchscreen {
+		touch_int: touch_int {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		touch_rst: touch_rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
new file mode 100644
index 0000000000..58ab7e9971
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rk3568-fastrhino-r66s.dtsi"
+
+/ {
+	model = "Lunzn FastRhino R66S";
+	compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
+
+	aliases {
+		mmc0 = &sdmmc0;
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
new file mode 100644
index 0000000000..89e84e3a92
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reset_button_pin>;
+
+		button-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&status_led_pin>;
+
+		status_led: led-status {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-leds {
+		status_led_pin: status-led-pin {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
new file mode 100644
index 0000000000..e1fe5e4426
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rk3568-fastrhino-r66s.dtsi"
+
+/ {
+	model = "Lunzn FastRhino R68S";
+	compatible = "lunzn,fastrhino-r68s", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdhci;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 15ms, 50ms for rtl8211f */
+	snps,reset-delays-us = <0 15000 50000>;
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 15ms, 50ms for rtl8211f */
+	snps,reset-delays-us = <0 15000 50000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x26>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-0 = <&eth_phy1_reset_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&pinctrl {
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gmac1 {
+		eth_phy1_reset_pin: eth-phy1-reset-pin {
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
new file mode 100644
index 0000000000..a8a4cc190e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
@@ -0,0 +1,730 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 EmbedFire <embedfire@embedfire.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "EmbedFire LubanCat 2";
+	compatible = "embedfire,lubancat-2", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user-led {
+			label = "user_led";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+			gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_pin>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	dc_5v: dc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+	};
+
+	vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "m2_pcie_3v3";
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc3v3_m2_pcie_en>;
+		pinctrl-names = "default";
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "minipcie_3v3";
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc3v3_mini_pcie_en>;
+		pinctrl-names = "default";
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb20_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_usb20_host_en>;
+		pinctrl-names = "default";
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb30_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_usb30_host_en>;
+		pinctrl-names = "default";
+	};
+
+	vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg_vbus";
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_otg_vbus_en>;
+		pinctrl-names = "default";
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	clock_in_out = "output";
+
+	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+
+	tx_delay = <0x22>;
+	rx_delay = <0x0e>;
+
+	phy-handle = <&rgmii_phy0>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	clock_in_out = "output";
+
+	snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+
+	tx_delay = <0x21>;
+	rx_delay = <0x0e>;
+
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&gic {
+	mbi-ranges = <94 31>, <229 31>, <289 31>;
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_m2_pcie>;
+	status = "okay";
+};
+
+&pcie2x1 {
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_mini_pcie>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm8 {
+	status = "okay";
+};
+
+&pwm9 {
+	status = "disabled";
+};
+
+&pwm10 {
+	status = "disabled";
+};
+
+&pwm14 {
+	status = "disabled";
+};
+
+&spi3 {
+	pinctrl-0 = <&spi3m1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3m1_xfer>;
+	status = "disabled";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&sdhci {
+	assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
+	assigned-clock-rates = <200000000>, <24000000>, <200000000>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	supports-emmc;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+/* USB OTG/USB Host_1 USB 2.0 Comb */
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_otg_vbus>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* USB Host_2/USB Host_3 USB 2.0 Comb */
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	extcon = <&usb2phy0>;
+	maximum-speed = "high-speed";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+/* USB3.0 Host */
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&pinctrl {
+	leds {
+		user_led_pin: user-status-led-pin {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
+			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
new file mode 100644
index 0000000000..c718b8dbb9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3568-nanopi-r5s.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R5C";
+	compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reset_button_pin>;
+
+		button-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
+
+		led-lan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_led: led-power {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wlan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20_reset_pin>;
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		power_led_pin: power-led-pin {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led_pin: wlan-led-pin {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie20_reset_pin: pcie20-reset-pin {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
new file mode 100644
index 0000000000..b6ad8328c7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3568-nanopi-r5s.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R5S";
+	compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
+
+		led-lan1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <1>;
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-lan2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <2>;
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_led: led-power {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 15ms, 50ms for rtl8211f */
+	snps,reset-delays-us = <0 15000 50000>;
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&pcie2x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	num-ib-windows = <8>;
+	num-ob-windows = <8>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		lan1_led_pin: lan1-led-pin {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lan2_led_pin: lan2-led-pin {
+			rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		power_led_pin: power-led-pin {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
new file mode 100644
index 0000000000..93189f8306
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vdd_usbc: vdd-usbc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usbc";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
new file mode 100644
index 0000000000..a337f547ca
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Hardkernel Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-M1";
+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		i2c0 = &i2c3;
+		i2c3 = &i2c0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: led-0 {
+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_power_pin>;
+		};
+		led_work: led-1 {
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_pin>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_pin>;
+		simple-audio-card,name = "Analog RK817";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0 {
+	/* Used for USB3 */
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&combphy1 {
+	/* Used for USB3 */
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&combphy2 {
+	/* used for SATA */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+
+	tx_delay = <0x4f>;
+	rx_delay = <0x2d>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pin>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	fspi {
+		fspi_dual_io_pins: fspi-dual-io-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PD0 1 &pcfg_pull_none>,
+				/* fspi_cs0n */
+				<1 RK_PD3 1 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PD1 1 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PD2 1 &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			/* external pullup to VCC3V3_SYS */
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_power_pin: led-power-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		led_work_pin: led-work-pin {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_reset_pin: pcie-reset-pin {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rk809 {
+		hp_det_pin: hp-det-pin {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
+	pinctrl-0 = <&fspi_dual_io_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SPL";
+				reg = <0x0 0xe0000>;
+			};
+			partition@e0000 {
+				label = "U-Boot Env";
+				reg = <0xe0000 0x20000>;
+			};
+			partition@100000 {
+				label = "U-Boot";
+				reg = <0x100000 0x200000>;
+			};
+			partition@300000 {
+				label = "splash";
+				reg = <0x300000 0x100000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
new file mode 100644
index 0000000000..0a979bfb63
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
@@ -0,0 +1,3214 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	acodec {
+		/omit-if-no-ref/
+		acodec_pins: acodec-pins {
+			rockchip,pins =
+				/* acodec_adc_sync */
+				<1 RK_PB1 5 &pcfg_pull_none>,
+				/* acodec_adcclk */
+				<1 RK_PA1 5 &pcfg_pull_none>,
+				/* acodec_adcdata */
+				<1 RK_PA0 5 &pcfg_pull_none>,
+				/* acodec_dac_datal */
+				<1 RK_PA7 5 &pcfg_pull_none>,
+				/* acodec_dac_datar */
+				<1 RK_PB0 5 &pcfg_pull_none>,
+				/* acodec_dacclk */
+				<1 RK_PA3 5 &pcfg_pull_none>,
+				/* acodec_dacsync */
+				<1 RK_PA5 5 &pcfg_pull_none>;
+		};
+	};
+
+	audiopwm {
+		/omit-if-no-ref/
+		audiopwm_lout: audiopwm-lout {
+			rockchip,pins =
+				/* audiopwm_lout */
+				<1 RK_PA0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_loutn: audiopwm-loutn {
+			rockchip,pins =
+				/* audiopwm_loutn */
+				<1 RK_PA1 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_loutp: audiopwm-loutp {
+			rockchip,pins =
+				/* audiopwm_loutp */
+				<1 RK_PA0 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_rout: audiopwm-rout {
+			rockchip,pins =
+				/* audiopwm_rout */
+				<1 RK_PA1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_routn: audiopwm-routn {
+			rockchip,pins =
+				/* audiopwm_routn */
+				<1 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_routp: audiopwm-routp {
+			rockchip,pins =
+				/* audiopwm_routp */
+				<1 RK_PA6 4 &pcfg_pull_none>;
+		};
+	};
+
+	bt656 {
+		/omit-if-no-ref/
+		bt656m0_pins: bt656m0-pins {
+			rockchip,pins =
+				/* bt656_clkm0 */
+				<3 RK_PA0 2 &pcfg_pull_none>,
+				/* bt656_d0m0 */
+				<2 RK_PD0 2 &pcfg_pull_none>,
+				/* bt656_d1m0 */
+				<2 RK_PD1 2 &pcfg_pull_none>,
+				/* bt656_d2m0 */
+				<2 RK_PD2 2 &pcfg_pull_none>,
+				/* bt656_d3m0 */
+				<2 RK_PD3 2 &pcfg_pull_none>,
+				/* bt656_d4m0 */
+				<2 RK_PD4 2 &pcfg_pull_none>,
+				/* bt656_d5m0 */
+				<2 RK_PD5 2 &pcfg_pull_none>,
+				/* bt656_d6m0 */
+				<2 RK_PD6 2 &pcfg_pull_none>,
+				/* bt656_d7m0 */
+				<2 RK_PD7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		bt656m1_pins: bt656m1-pins {
+			rockchip,pins =
+				/* bt656_clkm1 */
+				<4 RK_PB4 5 &pcfg_pull_none>,
+				/* bt656_d0m1 */
+				<3 RK_PC6 5 &pcfg_pull_none>,
+				/* bt656_d1m1 */
+				<3 RK_PC7 5 &pcfg_pull_none>,
+				/* bt656_d2m1 */
+				<3 RK_PD0 5 &pcfg_pull_none>,
+				/* bt656_d3m1 */
+				<3 RK_PD1 5 &pcfg_pull_none>,
+				/* bt656_d4m1 */
+				<3 RK_PD2 5 &pcfg_pull_none>,
+				/* bt656_d5m1 */
+				<3 RK_PD3 5 &pcfg_pull_none>,
+				/* bt656_d6m1 */
+				<3 RK_PD4 5 &pcfg_pull_none>,
+				/* bt656_d7m1 */
+				<3 RK_PD5 5 &pcfg_pull_none>;
+		};
+	};
+
+	bt1120 {
+		/omit-if-no-ref/
+		bt1120_pins: bt1120-pins {
+			rockchip,pins =
+				/* bt1120_clk */
+				<3 RK_PA6 2 &pcfg_pull_none>,
+				/* bt1120_d0 */
+				<3 RK_PA1 2 &pcfg_pull_none>,
+				/* bt1120_d1 */
+				<3 RK_PA2 2 &pcfg_pull_none>,
+				/* bt1120_d2 */
+				<3 RK_PA3 2 &pcfg_pull_none>,
+				/* bt1120_d3 */
+				<3 RK_PA4 2 &pcfg_pull_none>,
+				/* bt1120_d4 */
+				<3 RK_PA5 2 &pcfg_pull_none>,
+				/* bt1120_d5 */
+				<3 RK_PA7 2 &pcfg_pull_none>,
+				/* bt1120_d6 */
+				<3 RK_PB0 2 &pcfg_pull_none>,
+				/* bt1120_d7 */
+				<3 RK_PB1 2 &pcfg_pull_none>,
+				/* bt1120_d8 */
+				<3 RK_PB2 2 &pcfg_pull_none>,
+				/* bt1120_d9 */
+				<3 RK_PB3 2 &pcfg_pull_none>,
+				/* bt1120_d10 */
+				<3 RK_PB4 2 &pcfg_pull_none>,
+				/* bt1120_d11 */
+				<3 RK_PB5 2 &pcfg_pull_none>,
+				/* bt1120_d12 */
+				<3 RK_PB6 2 &pcfg_pull_none>,
+				/* bt1120_d13 */
+				<3 RK_PC1 2 &pcfg_pull_none>,
+				/* bt1120_d14 */
+				<3 RK_PC2 2 &pcfg_pull_none>,
+				/* bt1120_d15 */
+				<3 RK_PC3 2 &pcfg_pull_none>;
+		};
+	};
+
+	cam {
+		/omit-if-no-ref/
+		cam_clkout0: cam-clkout0 {
+			rockchip,pins =
+				/* cam_clkout0 */
+				<4 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cam_clkout1: cam-clkout1 {
+			rockchip,pins =
+				/* cam_clkout1 */
+				<4 RK_PB0 1 &pcfg_pull_none>;
+		};
+	};
+
+	can0 {
+		/omit-if-no-ref/
+		can0m0_pins: can0m0-pins {
+			rockchip,pins =
+				/* can0_rxm0 */
+				<0 RK_PB4 2 &pcfg_pull_none>,
+				/* can0_txm0 */
+				<0 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can0m1_pins: can0m1-pins {
+			rockchip,pins =
+				/* can0_rxm1 */
+				<2 RK_PA2 4 &pcfg_pull_none>,
+				/* can0_txm1 */
+				<2 RK_PA1 4 &pcfg_pull_none>;
+		};
+	};
+
+	can1 {
+		/omit-if-no-ref/
+		can1m0_pins: can1m0-pins {
+			rockchip,pins =
+				/* can1_rxm0 */
+				<1 RK_PA0 3 &pcfg_pull_none>,
+				/* can1_txm0 */
+				<1 RK_PA1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can1m1_pins: can1m1-pins {
+			rockchip,pins =
+				/* can1_rxm1 */
+				<4 RK_PC2 3 &pcfg_pull_none>,
+				/* can1_txm1 */
+				<4 RK_PC3 3 &pcfg_pull_none>;
+		};
+	};
+
+	can2 {
+		/omit-if-no-ref/
+		can2m0_pins: can2m0-pins {
+			rockchip,pins =
+				/* can2_rxm0 */
+				<4 RK_PB4 3 &pcfg_pull_none>,
+				/* can2_txm0 */
+				<4 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can2m1_pins: can2m1-pins {
+			rockchip,pins =
+				/* can2_rxm1 */
+				<2 RK_PB1 4 &pcfg_pull_none>,
+				/* can2_txm1 */
+				<2 RK_PB2 4 &pcfg_pull_none>;
+		};
+	};
+
+	cif {
+		/omit-if-no-ref/
+		cif_clk: cif-clk {
+			rockchip,pins =
+				/* cif_clkout */
+				<4 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_clk: cif-dvp-clk {
+			rockchip,pins =
+				/* cif_clkin */
+				<4 RK_PC1 1 &pcfg_pull_none>,
+				/* cif_href */
+				<4 RK_PB6 1 &pcfg_pull_none>,
+				/* cif_vsync */
+				<4 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_bus16: cif-dvp-bus16 {
+			rockchip,pins =
+				/* cif_d8 */
+				<3 RK_PD6 1 &pcfg_pull_none>,
+				/* cif_d9 */
+				<3 RK_PD7 1 &pcfg_pull_none>,
+				/* cif_d10 */
+				<4 RK_PA0 1 &pcfg_pull_none>,
+				/* cif_d11 */
+				<4 RK_PA1 1 &pcfg_pull_none>,
+				/* cif_d12 */
+				<4 RK_PA2 1 &pcfg_pull_none>,
+				/* cif_d13 */
+				<4 RK_PA3 1 &pcfg_pull_none>,
+				/* cif_d14 */
+				<4 RK_PA4 1 &pcfg_pull_none>,
+				/* cif_d15 */
+				<4 RK_PA5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_bus8: cif-dvp-bus8 {
+			rockchip,pins =
+				/* cif_d0 */
+				<3 RK_PC6 1 &pcfg_pull_none>,
+				/* cif_d1 */
+				<3 RK_PC7 1 &pcfg_pull_none>,
+				/* cif_d2 */
+				<3 RK_PD0 1 &pcfg_pull_none>,
+				/* cif_d3 */
+				<3 RK_PD1 1 &pcfg_pull_none>,
+				/* cif_d4 */
+				<3 RK_PD2 1 &pcfg_pull_none>,
+				/* cif_d5 */
+				<3 RK_PD3 1 &pcfg_pull_none>,
+				/* cif_d6 */
+				<3 RK_PD4 1 &pcfg_pull_none>,
+				/* cif_d7 */
+				<3 RK_PD5 1 &pcfg_pull_none>;
+		};
+	};
+
+	clk32k {
+		/omit-if-no-ref/
+		clk32k_in: clk32k-in {
+			rockchip,pins =
+				/* clk32k_in */
+				<0 RK_PB0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		clk32k_out0: clk32k-out0 {
+			rockchip,pins =
+				/* clk32k_out0 */
+				<0 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		clk32k_out1: clk32k-out1 {
+			rockchip,pins =
+				/* clk32k_out1 */
+				<2 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	cpu {
+		/omit-if-no-ref/
+		cpu_pins: cpu-pins {
+			rockchip,pins =
+				/* cpu_avs */
+				<0 RK_PB7 2 &pcfg_pull_none>;
+		};
+	};
+
+	ebc {
+		/omit-if-no-ref/
+		ebc_extern: ebc-extern {
+			rockchip,pins =
+				/* ebc_sdce1 */
+				<4 RK_PA7 2 &pcfg_pull_none>,
+				/* ebc_sdce2 */
+				<4 RK_PB0 2 &pcfg_pull_none>,
+				/* ebc_sdce3 */
+				<4 RK_PB1 2 &pcfg_pull_none>,
+				/* ebc_sdshr */
+				<4 RK_PB5 2 &pcfg_pull_none>,
+				/* ebc_vcom */
+				<4 RK_PB2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		ebc_pins: ebc-pins {
+			rockchip,pins =
+				/* ebc_gdclk */
+				<4 RK_PC0 2 &pcfg_pull_none>,
+				/* ebc_gdoe */
+				<4 RK_PB3 2 &pcfg_pull_none>,
+				/* ebc_gdsp */
+				<4 RK_PB4 2 &pcfg_pull_none>,
+				/* ebc_sdce0 */
+				<4 RK_PA6 2 &pcfg_pull_none>,
+				/* ebc_sdclk */
+				<4 RK_PC1 2 &pcfg_pull_none>,
+				/* ebc_sddo0 */
+				<3 RK_PC6 2 &pcfg_pull_none>,
+				/* ebc_sddo1 */
+				<3 RK_PC7 2 &pcfg_pull_none>,
+				/* ebc_sddo2 */
+				<3 RK_PD0 2 &pcfg_pull_none>,
+				/* ebc_sddo3 */
+				<3 RK_PD1 2 &pcfg_pull_none>,
+				/* ebc_sddo4 */
+				<3 RK_PD2 2 &pcfg_pull_none>,
+				/* ebc_sddo5 */
+				<3 RK_PD3 2 &pcfg_pull_none>,
+				/* ebc_sddo6 */
+				<3 RK_PD4 2 &pcfg_pull_none>,
+				/* ebc_sddo7 */
+				<3 RK_PD5 2 &pcfg_pull_none>,
+				/* ebc_sddo8 */
+				<3 RK_PD6 2 &pcfg_pull_none>,
+				/* ebc_sddo9 */
+				<3 RK_PD7 2 &pcfg_pull_none>,
+				/* ebc_sddo10 */
+				<4 RK_PA0 2 &pcfg_pull_none>,
+				/* ebc_sddo11 */
+				<4 RK_PA1 2 &pcfg_pull_none>,
+				/* ebc_sddo12 */
+				<4 RK_PA2 2 &pcfg_pull_none>,
+				/* ebc_sddo13 */
+				<4 RK_PA3 2 &pcfg_pull_none>,
+				/* ebc_sddo14 */
+				<4 RK_PA4 2 &pcfg_pull_none>,
+				/* ebc_sddo15 */
+				<4 RK_PA5 2 &pcfg_pull_none>,
+				/* ebc_sdle */
+				<4 RK_PB6 2 &pcfg_pull_none>,
+				/* ebc_sdoe */
+				<4 RK_PB7 2 &pcfg_pull_none>;
+		};
+	};
+
+	edpdp {
+		/omit-if-no-ref/
+		edpdpm0_pins: edpdpm0-pins {
+			rockchip,pins =
+				/* edpdp_hpdinm0 */
+				<4 RK_PC4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		edpdpm1_pins: edpdpm1-pins {
+			rockchip,pins =
+				/* edpdp_hpdinm1 */
+				<0 RK_PC2 2 &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		/omit-if-no-ref/
+		emmc_rstnout: emmc-rstnout {
+			rockchip,pins =
+				/* emmc_rstn */
+				<1 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<1 RK_PB6 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<1 RK_PB7 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<1 RK_PC0 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<1 RK_PC1 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<1 RK_PC2 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<1 RK_PC3 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clkout */
+				<1 RK_PC5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<1 RK_PC4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_datastrobe: emmc-datastrobe {
+			rockchip,pins =
+				/* emmc_datastrobe */
+				<1 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	eth0 {
+		/omit-if-no-ref/
+		eth0_pins: eth0-pins {
+			rockchip,pins =
+				/* eth0_refclko25m */
+				<2 RK_PC1 2 &pcfg_pull_none>;
+		};
+	};
+
+	eth1 {
+		/omit-if-no-ref/
+		eth1m0_pins: eth1m0-pins {
+			rockchip,pins =
+				/* eth1_refclko25mm0 */
+				<3 RK_PB0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		eth1m1_pins: eth1m1-pins {
+			rockchip,pins =
+				/* eth1_refclko25mm1 */
+				<4 RK_PB3 3 &pcfg_pull_none>;
+		};
+	};
+
+	flash {
+		/omit-if-no-ref/
+		flash_pins: flash-pins {
+			rockchip,pins =
+				/* flash_ale */
+				<1 RK_PD0 2 &pcfg_pull_none>,
+				/* flash_cle */
+				<1 RK_PC6 3 &pcfg_pull_none>,
+				/* flash_cs0n */
+				<1 RK_PD3 2 &pcfg_pull_none>,
+				/* flash_cs1n */
+				<1 RK_PD4 2 &pcfg_pull_none>,
+				/* flash_d0 */
+				<1 RK_PB4 2 &pcfg_pull_none>,
+				/* flash_d1 */
+				<1 RK_PB5 2 &pcfg_pull_none>,
+				/* flash_d2 */
+				<1 RK_PB6 2 &pcfg_pull_none>,
+				/* flash_d3 */
+				<1 RK_PB7 2 &pcfg_pull_none>,
+				/* flash_d4 */
+				<1 RK_PC0 2 &pcfg_pull_none>,
+				/* flash_d5 */
+				<1 RK_PC1 2 &pcfg_pull_none>,
+				/* flash_d6 */
+				<1 RK_PC2 2 &pcfg_pull_none>,
+				/* flash_d7 */
+				<1 RK_PC3 2 &pcfg_pull_none>,
+				/* flash_dqs */
+				<1 RK_PC5 2 &pcfg_pull_none>,
+				/* flash_rdn */
+				<1 RK_PD2 2 &pcfg_pull_none>,
+				/* flash_rdy */
+				<1 RK_PD1 2 &pcfg_pull_none>,
+				/* flash_volsel */
+				<0 RK_PA7 1 &pcfg_pull_none>,
+				/* flash_wpn */
+				<1 RK_PC7 3 &pcfg_pull_none>,
+				/* flash_wrn */
+				<1 RK_PC4 2 &pcfg_pull_none>;
+		};
+	};
+
+	fspi {
+		/omit-if-no-ref/
+		fspi_pins: fspi-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PD0 1 &pcfg_pull_none>,
+				/* fspi_cs0n */
+				<1 RK_PD3 1 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PD1 1 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PD2 1 &pcfg_pull_none>,
+				/* fspi_d2 */
+				<1 RK_PC7 2 &pcfg_pull_none>,
+				/* fspi_d3 */
+				<1 RK_PD4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fspi_cs1: fspi-cs1 {
+			rockchip,pins =
+				/* fspi_cs1n */
+				<1 RK_PC6 2 &pcfg_pull_up>;
+		};
+	};
+
+	gmac0 {
+		/omit-if-no-ref/
+		gmac0_miim: gmac0-miim {
+			rockchip,pins =
+				/* gmac0_mdc */
+				<2 RK_PC3 2 &pcfg_pull_none>,
+				/* gmac0_mdio */
+				<2 RK_PC4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_clkinout: gmac0-clkinout {
+			rockchip,pins =
+				/* gmac0_mclkinout */
+				<2 RK_PC2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rx_er: gmac0-rx-er {
+			rockchip,pins =
+				/* gmac0_rxer */
+				<2 RK_PC5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rx_bus2: gmac0-rx-bus2 {
+			rockchip,pins =
+				/* gmac0_rxd0 */
+				<2 RK_PB6 1 &pcfg_pull_none>,
+				/* gmac0_rxd1 */
+				<2 RK_PB7 2 &pcfg_pull_none>,
+				/* gmac0_rxdvcrs */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_tx_bus2: gmac0-tx-bus2 {
+			rockchip,pins =
+				/* gmac0_txd0 */
+				<2 RK_PB3 1 &pcfg_pull_none_drv_level_2>,
+				/* gmac0_txd1 */
+				<2 RK_PB4 1 &pcfg_pull_none_drv_level_2>,
+				/* gmac0_txen */
+				<2 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_clk: gmac0-rgmii-clk {
+			rockchip,pins =
+				/* gmac0_rxclk */
+				<2 RK_PA5 2 &pcfg_pull_none>,
+				/* gmac0_txclk */
+				<2 RK_PB0 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_bus: gmac0-rgmii-bus {
+			rockchip,pins =
+				/* gmac0_rxd2 */
+				<2 RK_PA3 2 &pcfg_pull_none>,
+				/* gmac0_rxd3 */
+				<2 RK_PA4 2 &pcfg_pull_none>,
+				/* gmac0_txd2 */
+				<2 RK_PA6 2 &pcfg_pull_none_drv_level_2>,
+				/* gmac0_txd3 */
+				<2 RK_PA7 2 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	gmac1 {
+		/omit-if-no-ref/
+		gmac1m0_miim: gmac1m0-miim {
+			rockchip,pins =
+				/* gmac1_mdcm0 */
+				<3 RK_PC4 3 &pcfg_pull_none>,
+				/* gmac1_mdiom0 */
+				<3 RK_PC5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_clkinout: gmac1m0-clkinout {
+			rockchip,pins =
+				/* gmac1_mclkinoutm0 */
+				<3 RK_PC0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rx_er: gmac1m0-rx-er {
+			rockchip,pins =
+				/* gmac1_rxerm0 */
+				<3 RK_PB4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
+			rockchip,pins =
+				/* gmac1_rxd0m0 */
+				<3 RK_PB1 3 &pcfg_pull_none>,
+				/* gmac1_rxd1m0 */
+				<3 RK_PB2 3 &pcfg_pull_none>,
+				/* gmac1_rxdvcrsm0 */
+				<3 RK_PB3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
+			rockchip,pins =
+				/* gmac1_txd0m0 */
+				<3 RK_PB5 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txd1m0 */
+				<3 RK_PB6 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txenm0 */
+				<3 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
+			rockchip,pins =
+				/* gmac1_rxclkm0 */
+				<3 RK_PA7 3 &pcfg_pull_none>,
+				/* gmac1_txclkm0 */
+				<3 RK_PA6 3 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
+			rockchip,pins =
+				/* gmac1_rxd2m0 */
+				<3 RK_PA4 3 &pcfg_pull_none>,
+				/* gmac1_rxd3m0 */
+				<3 RK_PA5 3 &pcfg_pull_none>,
+				/* gmac1_txd2m0 */
+				<3 RK_PA2 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txd3m0 */
+				<3 RK_PA3 3 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_miim: gmac1m1-miim {
+			rockchip,pins =
+				/* gmac1_mdcm1 */
+				<4 RK_PB6 3 &pcfg_pull_none>,
+				/* gmac1_mdiom1 */
+				<4 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_clkinout: gmac1m1-clkinout {
+			rockchip,pins =
+				/* gmac1_mclkinoutm1 */
+				<4 RK_PC1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rx_er: gmac1m1-rx-er {
+			rockchip,pins =
+				/* gmac1_rxerm1 */
+				<4 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rx_bus2: gmac1m1-rx-bus2 {
+			rockchip,pins =
+				/* gmac1_rxd0m1 */
+				<4 RK_PA7 3 &pcfg_pull_none>,
+				/* gmac1_rxd1m1 */
+				<4 RK_PB0 3 &pcfg_pull_none>,
+				/* gmac1_rxdvcrsm1 */
+				<4 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_tx_bus2: gmac1m1-tx-bus2 {
+			rockchip,pins =
+				/* gmac1_txd0m1 */
+				<4 RK_PA4 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txd1m1 */
+				<4 RK_PA5 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txenm1 */
+				<4 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rgmii_clk: gmac1m1-rgmii-clk {
+			rockchip,pins =
+				/* gmac1_rxclkm1 */
+				<4 RK_PA3 3 &pcfg_pull_none>,
+				/* gmac1_txclkm1 */
+				<4 RK_PA0 3 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rgmii_bus: gmac1m1-rgmii-bus {
+			rockchip,pins =
+				/* gmac1_rxd2m1 */
+				<4 RK_PA1 3 &pcfg_pull_none>,
+				/* gmac1_rxd3m1 */
+				<4 RK_PA2 3 &pcfg_pull_none>,
+				/* gmac1_txd2m1 */
+				<3 RK_PD6 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txd3m1 */
+				<3 RK_PD7 3 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	gpu {
+		/omit-if-no-ref/
+		gpu_pins: gpu-pins {
+			rockchip,pins =
+				/* gpu_avs */
+				<0 RK_PC0 2 &pcfg_pull_none>,
+				/* gpu_pwren */
+				<0 RK_PA6 4 &pcfg_pull_none>;
+		};
+	};
+
+	hdmitx {
+		/omit-if-no-ref/
+		hdmitxm0_cec: hdmitxm0-cec {
+			rockchip,pins =
+				/* hdmitxm0_cec */
+				<4 RK_PD1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmitxm1_cec: hdmitxm1-cec {
+			rockchip,pins =
+				/* hdmitxm1_cec */
+				<0 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmitx_scl: hdmitx-scl {
+			rockchip,pins =
+				/* hdmitx_scl */
+				<4 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmitx_sda: hdmitx-sda {
+			rockchip,pins =
+				/* hdmitx_sda */
+				<4 RK_PD0 1 &pcfg_pull_none>;
+		};
+	};
+
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0_xfer: i2c0-xfer {
+			rockchip,pins =
+				/* i2c0_scl */
+				<0 RK_PB1 1 &pcfg_pull_none_smt>,
+				/* i2c0_sda */
+				<0 RK_PB2 1 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c1 {
+		/omit-if-no-ref/
+		i2c1_xfer: i2c1-xfer {
+			rockchip,pins =
+				/* i2c1_scl */
+				<0 RK_PB3 1 &pcfg_pull_none_smt>,
+				/* i2c1_sda */
+				<0 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2m0_xfer: i2c2m0-xfer {
+			rockchip,pins =
+				/* i2c2_sclm0 */
+				<0 RK_PB5 1 &pcfg_pull_none_smt>,
+				/* i2c2_sdam0 */
+				<0 RK_PB6 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m1_xfer: i2c2m1-xfer {
+			rockchip,pins =
+				/* i2c2_sclm1 */
+				<4 RK_PB5 1 &pcfg_pull_none_smt>,
+				/* i2c2_sdam1 */
+				<4 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m0_xfer: i2c3m0-xfer {
+			rockchip,pins =
+				/* i2c3_sclm0 */
+				<1 RK_PA1 1 &pcfg_pull_none_smt>,
+				/* i2c3_sdam0 */
+				<1 RK_PA0 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m1_xfer: i2c3m1-xfer {
+			rockchip,pins =
+				/* i2c3_sclm1 */
+				<3 RK_PB5 4 &pcfg_pull_none_smt>,
+				/* i2c3_sdam1 */
+				<3 RK_PB6 4 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c4 {
+		/omit-if-no-ref/
+		i2c4m0_xfer: i2c4m0-xfer {
+			rockchip,pins =
+				/* i2c4_sclm0 */
+				<4 RK_PB3 1 &pcfg_pull_none_smt>,
+				/* i2c4_sdam0 */
+				<4 RK_PB2 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m1_xfer: i2c4m1-xfer {
+			rockchip,pins =
+				/* i2c4_sclm1 */
+				<2 RK_PB2 2 &pcfg_pull_none_smt>,
+				/* i2c4_sdam1 */
+				<2 RK_PB1 2 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c5 {
+		/omit-if-no-ref/
+		i2c5m0_xfer: i2c5m0-xfer {
+			rockchip,pins =
+				/* i2c5_sclm0 */
+				<3 RK_PB3 4 &pcfg_pull_none_smt>,
+				/* i2c5_sdam0 */
+				<3 RK_PB4 4 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m1_xfer: i2c5m1-xfer {
+			rockchip,pins =
+				/* i2c5_sclm1 */
+				<4 RK_PC7 2 &pcfg_pull_none_smt>,
+				/* i2c5_sdam1 */
+				<4 RK_PD0 2 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2s1 {
+		/omit-if-no-ref/
+		i2s1m0_lrckrx: i2s1m0-lrckrx {
+			rockchip,pins =
+				/* i2s1m0_lrckrx */
+				<1 RK_PA6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_lrcktx: i2s1m0-lrcktx {
+			rockchip,pins =
+				/* i2s1m0_lrcktx */
+				<1 RK_PA5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_mclk: i2s1m0-mclk {
+			rockchip,pins =
+				/* i2s1m0_mclk */
+				<1 RK_PA2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sclkrx: i2s1m0-sclkrx {
+			rockchip,pins =
+				/* i2s1m0_sclkrx */
+				<1 RK_PA4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sclktx: i2s1m0-sclktx {
+			rockchip,pins =
+				/* i2s1m0_sclktx */
+				<1 RK_PA3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi0: i2s1m0-sdi0 {
+			rockchip,pins =
+				/* i2s1m0_sdi0 */
+				<1 RK_PB3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi1: i2s1m0-sdi1 {
+			rockchip,pins =
+				/* i2s1m0_sdi1 */
+				<1 RK_PB2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi2: i2s1m0-sdi2 {
+			rockchip,pins =
+				/* i2s1m0_sdi2 */
+				<1 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi3: i2s1m0-sdi3 {
+			rockchip,pins =
+				/* i2s1m0_sdi3 */
+				<1 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo0: i2s1m0-sdo0 {
+			rockchip,pins =
+				/* i2s1m0_sdo0 */
+				<1 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo1: i2s1m0-sdo1 {
+			rockchip,pins =
+				/* i2s1m0_sdo1 */
+				<1 RK_PB0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo2: i2s1m0-sdo2 {
+			rockchip,pins =
+				/* i2s1m0_sdo2 */
+				<1 RK_PB1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo3: i2s1m0-sdo3 {
+			rockchip,pins =
+				/* i2s1m0_sdo3 */
+				<1 RK_PB2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_lrckrx: i2s1m1-lrckrx {
+			rockchip,pins =
+				/* i2s1m1_lrckrx */
+				<4 RK_PA7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_lrcktx: i2s1m1-lrcktx {
+			rockchip,pins =
+				/* i2s1m1_lrcktx */
+				<3 RK_PD0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_mclk: i2s1m1-mclk {
+			rockchip,pins =
+				/* i2s1m1_mclk */
+				<3 RK_PC6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sclkrx: i2s1m1-sclkrx {
+			rockchip,pins =
+				/* i2s1m1_sclkrx */
+				<4 RK_PA6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sclktx: i2s1m1-sclktx {
+			rockchip,pins =
+				/* i2s1m1_sclktx */
+				<3 RK_PC7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi0: i2s1m1-sdi0 {
+			rockchip,pins =
+				/* i2s1m1_sdi0 */
+				<3 RK_PD2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi1: i2s1m1-sdi1 {
+			rockchip,pins =
+				/* i2s1m1_sdi1 */
+				<3 RK_PD3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi2: i2s1m1-sdi2 {
+			rockchip,pins =
+				/* i2s1m1_sdi2 */
+				<3 RK_PD4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi3: i2s1m1-sdi3 {
+			rockchip,pins =
+				/* i2s1m1_sdi3 */
+				<3 RK_PD5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo0: i2s1m1-sdo0 {
+			rockchip,pins =
+				/* i2s1m1_sdo0 */
+				<3 RK_PD1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo1: i2s1m1-sdo1 {
+			rockchip,pins =
+				/* i2s1m1_sdo1 */
+				<4 RK_PB0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo2: i2s1m1-sdo2 {
+			rockchip,pins =
+				/* i2s1m1_sdo2 */
+				<4 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo3: i2s1m1-sdo3 {
+			rockchip,pins =
+				/* i2s1m1_sdo3 */
+				<4 RK_PB5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_lrckrx: i2s1m2-lrckrx {
+			rockchip,pins =
+				/* i2s1m2_lrckrx */
+				<3 RK_PC5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_lrcktx: i2s1m2-lrcktx {
+			rockchip,pins =
+				/* i2s1m2_lrcktx */
+				<2 RK_PD2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_mclk: i2s1m2-mclk {
+			rockchip,pins =
+				/* i2s1m2_mclk */
+				<2 RK_PD0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sclkrx: i2s1m2-sclkrx {
+			rockchip,pins =
+				/* i2s1m2_sclkrx */
+				<3 RK_PC3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sclktx: i2s1m2-sclktx {
+			rockchip,pins =
+				/* i2s1m2_sclktx */
+				<2 RK_PD1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdi0: i2s1m2-sdi0 {
+			rockchip,pins =
+				/* i2s1m2_sdi0 */
+				<2 RK_PD3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdi1: i2s1m2-sdi1 {
+			rockchip,pins =
+				/* i2s1m2_sdi1 */
+				<2 RK_PD4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdi2: i2s1m2-sdi2 {
+			rockchip,pins =
+				/* i2s1m2_sdi2 */
+				<2 RK_PD5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdi3: i2s1m2-sdi3 {
+			rockchip,pins =
+				/* i2s1m2_sdi3 */
+				<2 RK_PD6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdo0: i2s1m2-sdo0 {
+			rockchip,pins =
+				/* i2s1m2_sdo0 */
+				<2 RK_PD7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdo1: i2s1m2-sdo1 {
+			rockchip,pins =
+				/* i2s1m2_sdo1 */
+				<3 RK_PA0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdo2: i2s1m2-sdo2 {
+			rockchip,pins =
+				/* i2s1m2_sdo2 */
+				<3 RK_PC1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdo3: i2s1m2-sdo3 {
+			rockchip,pins =
+				/* i2s1m2_sdo3 */
+				<3 RK_PC2 5 &pcfg_pull_none>;
+		};
+	};
+
+	i2s2 {
+		/omit-if-no-ref/
+		i2s2m0_lrckrx: i2s2m0-lrckrx {
+			rockchip,pins =
+				/* i2s2m0_lrckrx */
+				<2 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_lrcktx: i2s2m0-lrcktx {
+			rockchip,pins =
+				/* i2s2m0_lrcktx */
+				<2 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_mclk: i2s2m0-mclk {
+			rockchip,pins =
+				/* i2s2m0_mclk */
+				<2 RK_PC1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sclkrx: i2s2m0-sclkrx {
+			rockchip,pins =
+				/* i2s2m0_sclkrx */
+				<2 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sclktx: i2s2m0-sclktx {
+			rockchip,pins =
+				/* i2s2m0_sclktx */
+				<2 RK_PC2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdi: i2s2m0-sdi {
+			rockchip,pins =
+				/* i2s2m0_sdi */
+				<2 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdo: i2s2m0-sdo {
+			rockchip,pins =
+				/* i2s2m0_sdo */
+				<2 RK_PC4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_lrckrx: i2s2m1-lrckrx {
+			rockchip,pins =
+				/* i2s2m1_lrckrx */
+				<4 RK_PA5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_lrcktx: i2s2m1-lrcktx {
+			rockchip,pins =
+				/* i2s2m1_lrcktx */
+				<4 RK_PA4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_mclk: i2s2m1-mclk {
+			rockchip,pins =
+				/* i2s2m1_mclk */
+				<4 RK_PB6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sclkrx: i2s2m1-sclkrx {
+			rockchip,pins =
+				/* i2s2m1_sclkrx */
+				<4 RK_PC1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sclktx: i2s2m1-sclktx {
+			rockchip,pins =
+				/* i2s2m1_sclktx */
+				<4 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdi: i2s2m1-sdi {
+			rockchip,pins =
+				/* i2s2m1_sdi */
+				<4 RK_PB2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdo: i2s2m1-sdo {
+			rockchip,pins =
+				/* i2s2m1_sdo */
+				<4 RK_PB3 5 &pcfg_pull_none>;
+		};
+	};
+
+	i2s3 {
+		/omit-if-no-ref/
+		i2s3m0_lrck: i2s3m0-lrck {
+			rockchip,pins =
+				/* i2s3m0_lrck */
+				<3 RK_PA4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m0_mclk: i2s3m0-mclk {
+			rockchip,pins =
+				/* i2s3m0_mclk */
+				<3 RK_PA2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m0_sclk: i2s3m0-sclk {
+			rockchip,pins =
+				/* i2s3m0_sclk */
+				<3 RK_PA3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m0_sdi: i2s3m0-sdi {
+			rockchip,pins =
+				/* i2s3m0_sdi */
+				<3 RK_PA6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m0_sdo: i2s3m0-sdo {
+			rockchip,pins =
+				/* i2s3m0_sdo */
+				<3 RK_PA5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_lrck: i2s3m1-lrck {
+			rockchip,pins =
+				/* i2s3m1_lrck */
+				<4 RK_PC4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_mclk: i2s3m1-mclk {
+			rockchip,pins =
+				/* i2s3m1_mclk */
+				<4 RK_PC2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_sclk: i2s3m1-sclk {
+			rockchip,pins =
+				/* i2s3m1_sclk */
+				<4 RK_PC3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_sdi: i2s3m1-sdi {
+			rockchip,pins =
+				/* i2s3m1_sdi */
+				<4 RK_PC6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_sdo: i2s3m1-sdo {
+			rockchip,pins =
+				/* i2s3m1_sdo */
+				<4 RK_PC5 5 &pcfg_pull_none>;
+		};
+	};
+
+	isp {
+		/omit-if-no-ref/
+		isp_pins: isp-pins {
+			rockchip,pins =
+				/* isp_flashtrigin */
+				<4 RK_PB4 4 &pcfg_pull_none>,
+				/* isp_flashtrigout */
+				<4 RK_PA6 1 &pcfg_pull_none>,
+				/* isp_prelighttrig */
+				<4 RK_PB1 1 &pcfg_pull_none>;
+		};
+	};
+
+	jtag {
+		/omit-if-no-ref/
+		jtag_pins: jtag-pins {
+			rockchip,pins =
+				/* jtag_tck */
+				<1 RK_PD7 2 &pcfg_pull_none>,
+				/* jtag_tms */
+				<2 RK_PA0 2 &pcfg_pull_none>;
+		};
+	};
+
+	lcdc {
+		/omit-if-no-ref/
+		lcdc_ctl: lcdc-ctl {
+			rockchip,pins =
+				/* lcdc_clk */
+				<3 RK_PA0 1 &pcfg_pull_none>,
+				/* lcdc_d0 */
+				<2 RK_PD0 1 &pcfg_pull_none>,
+				/* lcdc_d1 */
+				<2 RK_PD1 1 &pcfg_pull_none>,
+				/* lcdc_d2 */
+				<2 RK_PD2 1 &pcfg_pull_none>,
+				/* lcdc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_none>,
+				/* lcdc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_none>,
+				/* lcdc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_none>,
+				/* lcdc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_none>,
+				/* lcdc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_none>,
+				/* lcdc_d8 */
+				<3 RK_PA1 1 &pcfg_pull_none>,
+				/* lcdc_d9 */
+				<3 RK_PA2 1 &pcfg_pull_none>,
+				/* lcdc_d10 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* lcdc_d11 */
+				<3 RK_PA4 1 &pcfg_pull_none>,
+				/* lcdc_d12 */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* lcdc_d13 */
+				<3 RK_PA6 1 &pcfg_pull_none>,
+				/* lcdc_d14 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* lcdc_d15 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* lcdc_d16 */
+				<3 RK_PB1 1 &pcfg_pull_none>,
+				/* lcdc_d17 */
+				<3 RK_PB2 1 &pcfg_pull_none>,
+				/* lcdc_d18 */
+				<3 RK_PB3 1 &pcfg_pull_none>,
+				/* lcdc_d19 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* lcdc_d20 */
+				<3 RK_PB5 1 &pcfg_pull_none>,
+				/* lcdc_d21 */
+				<3 RK_PB6 1 &pcfg_pull_none>,
+				/* lcdc_d22 */
+				<3 RK_PB7 1 &pcfg_pull_none>,
+				/* lcdc_d23 */
+				<3 RK_PC0 1 &pcfg_pull_none>,
+				/* lcdc_den */
+				<3 RK_PC3 1 &pcfg_pull_none>,
+				/* lcdc_hsync */
+				<3 RK_PC1 1 &pcfg_pull_none>,
+				/* lcdc_vsync */
+				<3 RK_PC2 1 &pcfg_pull_none>;
+		};
+	};
+
+	mcu {
+		/omit-if-no-ref/
+		mcu_pins: mcu-pins {
+			rockchip,pins =
+				/* mcu_jtagtck */
+				<0 RK_PB4 4 &pcfg_pull_none>,
+				/* mcu_jtagtdi */
+				<0 RK_PC1 4 &pcfg_pull_none>,
+				/* mcu_jtagtdo */
+				<0 RK_PB3 4 &pcfg_pull_none>,
+				/* mcu_jtagtms */
+				<0 RK_PC2 4 &pcfg_pull_none>,
+				/* mcu_jtagtrstn */
+				<0 RK_PC3 4 &pcfg_pull_none>;
+		};
+	};
+
+	npu {
+		/omit-if-no-ref/
+		npu_pins: npu-pins {
+			rockchip,pins =
+				/* npu_avs */
+				<0 RK_PC1 2 &pcfg_pull_none>;
+		};
+	};
+
+	pcie20 {
+		/omit-if-no-ref/
+		pcie20m0_pins: pcie20m0-pins {
+			rockchip,pins =
+				/* pcie20_clkreqnm0 */
+				<0 RK_PA5 3 &pcfg_pull_none>,
+				/* pcie20_perstnm0 */
+				<0 RK_PB6 3 &pcfg_pull_none>,
+				/* pcie20_wakenm0 */
+				<0 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20m1_pins: pcie20m1-pins {
+			rockchip,pins =
+				/* pcie20_clkreqnm1 */
+				<2 RK_PD0 4 &pcfg_pull_none>,
+				/* pcie20_perstnm1 */
+				<3 RK_PC1 4 &pcfg_pull_none>,
+				/* pcie20_wakenm1 */
+				<2 RK_PD1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20m2_pins: pcie20m2-pins {
+			rockchip,pins =
+				/* pcie20_clkreqnm2 */
+				<1 RK_PB0 4 &pcfg_pull_none>,
+				/* pcie20_perstnm2 */
+				<1 RK_PB2 4 &pcfg_pull_none>,
+				/* pcie20_wakenm2 */
+				<1 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20_buttonrstn: pcie20-buttonrstn {
+			rockchip,pins =
+				/* pcie20_buttonrstn */
+				<0 RK_PB4 3 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x1 {
+		/omit-if-no-ref/
+		pcie30x1m0_pins: pcie30x1m0-pins {
+			rockchip,pins =
+				/* pcie30x1_clkreqnm0 */
+				<0 RK_PA4 3 &pcfg_pull_none>,
+				/* pcie30x1_perstnm0 */
+				<0 RK_PC3 3 &pcfg_pull_none>,
+				/* pcie30x1_wakenm0 */
+				<0 RK_PC2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m1_pins: pcie30x1m1-pins {
+			rockchip,pins =
+				/* pcie30x1_clkreqnm1 */
+				<2 RK_PD2 4 &pcfg_pull_none>,
+				/* pcie30x1_perstnm1 */
+				<3 RK_PA1 4 &pcfg_pull_none>,
+				/* pcie30x1_wakenm1 */
+				<2 RK_PD3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m2_pins: pcie30x1m2-pins {
+			rockchip,pins =
+				/* pcie30x1_clkreqnm2 */
+				<1 RK_PA5 4 &pcfg_pull_none>,
+				/* pcie30x1_perstnm2 */
+				<1 RK_PA2 4 &pcfg_pull_none>,
+				/* pcie30x1_wakenm2 */
+				<1 RK_PA3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1_buttonrstn: pcie30x1-buttonrstn {
+			rockchip,pins =
+				/* pcie30x1_buttonrstn */
+				<0 RK_PB3 3 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x2 {
+		/omit-if-no-ref/
+		pcie30x2m0_pins: pcie30x2m0-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqnm0 */
+				<0 RK_PA6 2 &pcfg_pull_none>,
+				/* pcie30x2_perstnm0 */
+				<0 RK_PC6 3 &pcfg_pull_none>,
+				/* pcie30x2_wakenm0 */
+				<0 RK_PC5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m1_pins: pcie30x2m1-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqnm1 */
+				<2 RK_PD4 4 &pcfg_pull_none>,
+				/* pcie30x2_perstnm1 */
+				<2 RK_PD6 4 &pcfg_pull_none>,
+				/* pcie30x2_wakenm1 */
+				<2 RK_PD5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m2_pins: pcie30x2m2-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqnm2 */
+				<4 RK_PC2 4 &pcfg_pull_none>,
+				/* pcie30x2_perstnm2 */
+				<4 RK_PC4 4 &pcfg_pull_none>,
+				/* pcie30x2_wakenm2 */
+				<4 RK_PC3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2_buttonrstn: pcie30x2-buttonrstn {
+			rockchip,pins =
+				/* pcie30x2_buttonrstn */
+				<0 RK_PB0 3 &pcfg_pull_none>;
+		};
+	};
+
+	pdm {
+		/omit-if-no-ref/
+		pdmm0_clk: pdmm0-clk {
+			rockchip,pins =
+				/* pdm_clk0m0 */
+				<1 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_clk1: pdmm0-clk1 {
+			rockchip,pins =
+				/* pdmm0_clk1 */
+				<1 RK_PA4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi0: pdmm0-sdi0 {
+			rockchip,pins =
+				/* pdmm0_sdi0 */
+				<1 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi1: pdmm0-sdi1 {
+			rockchip,pins =
+				/* pdmm0_sdi1 */
+				<1 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi2: pdmm0-sdi2 {
+			rockchip,pins =
+				/* pdmm0_sdi2 */
+				<1 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi3: pdmm0-sdi3 {
+			rockchip,pins =
+				/* pdmm0_sdi3 */
+				<1 RK_PB0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_clk: pdmm1-clk {
+			rockchip,pins =
+				/* pdm_clk0m1 */
+				<3 RK_PD6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_clk1: pdmm1-clk1 {
+			rockchip,pins =
+				/* pdmm1_clk1 */
+				<4 RK_PA0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi0: pdmm1-sdi0 {
+			rockchip,pins =
+				/* pdmm1_sdi0 */
+				<3 RK_PD7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi1: pdmm1-sdi1 {
+			rockchip,pins =
+				/* pdmm1_sdi1 */
+				<4 RK_PA1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi2: pdmm1-sdi2 {
+			rockchip,pins =
+				/* pdmm1_sdi2 */
+				<4 RK_PA2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi3: pdmm1-sdi3 {
+			rockchip,pins =
+				/* pdmm1_sdi3 */
+				<4 RK_PA3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_clk1: pdmm2-clk1 {
+			rockchip,pins =
+				/* pdmm2_clk1 */
+				<3 RK_PC4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_sdi0: pdmm2-sdi0 {
+			rockchip,pins =
+				/* pdmm2_sdi0 */
+				<3 RK_PB3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_sdi1: pdmm2-sdi1 {
+			rockchip,pins =
+				/* pdmm2_sdi1 */
+				<3 RK_PB4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_sdi2: pdmm2-sdi2 {
+			rockchip,pins =
+				/* pdmm2_sdi2 */
+				<3 RK_PB7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_sdi3: pdmm2-sdi3 {
+			rockchip,pins =
+				/* pdmm2_sdi3 */
+				<3 RK_PC0 5 &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		/omit-if-no-ref/
+		pmic_pins: pmic-pins {
+			rockchip,pins =
+				/* pmic_sleep */
+				<0 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+
+	pmu {
+		/omit-if-no-ref/
+		pmu_pins: pmu-pins {
+			rockchip,pins =
+				/* pmu_debug0 */
+				<0 RK_PA5 4 &pcfg_pull_none>,
+				/* pmu_debug1 */
+				<0 RK_PA6 3 &pcfg_pull_none>,
+				/* pmu_debug2 */
+				<0 RK_PC4 4 &pcfg_pull_none>,
+				/* pmu_debug3 */
+				<0 RK_PC5 4 &pcfg_pull_none>,
+				/* pmu_debug4 */
+				<0 RK_PC6 4 &pcfg_pull_none>,
+				/* pmu_debug5 */
+				<0 RK_PC7 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		/omit-if-no-ref/
+		pwm0m0_pins: pwm0m0-pins {
+			rockchip,pins =
+				/* pwm0_m0 */
+				<0 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm0m1_pins: pwm0m1-pins {
+			rockchip,pins =
+				/* pwm0_m1 */
+				<0 RK_PC7 2 &pcfg_pull_none>;
+		};
+	};
+
+	pwm1 {
+		/omit-if-no-ref/
+		pwm1m0_pins: pwm1m0-pins {
+			rockchip,pins =
+				/* pwm1_m0 */
+				<0 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm1m1_pins: pwm1m1-pins {
+			rockchip,pins =
+				/* pwm1_m1 */
+				<0 RK_PB5 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m0_pins: pwm2m0-pins {
+			rockchip,pins =
+				/* pwm2_m0 */
+				<0 RK_PC1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm2m1_pins: pwm2m1-pins {
+			rockchip,pins =
+				/* pwm2_m1 */
+				<0 RK_PB6 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm3 {
+		/omit-if-no-ref/
+		pwm3_pins: pwm3-pins {
+			rockchip,pins =
+				/* pwm3_ir */
+				<0 RK_PC2 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4_pins: pwm4-pins {
+			rockchip,pins =
+				/* pwm4 */
+				<0 RK_PC3 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5_pins: pwm5-pins {
+			rockchip,pins =
+				/* pwm5 */
+				<0 RK_PC4 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6_pins: pwm6-pins {
+			rockchip,pins =
+				/* pwm6 */
+				<0 RK_PC5 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7_pins: pwm7-pins {
+			rockchip,pins =
+				/* pwm7_ir */
+				<0 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm8 {
+		/omit-if-no-ref/
+		pwm8m0_pins: pwm8m0-pins {
+			rockchip,pins =
+				/* pwm8_m0 */
+				<3 RK_PB1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm8m1_pins: pwm8m1-pins {
+			rockchip,pins =
+				/* pwm8_m1 */
+				<1 RK_PD5 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm9 {
+		/omit-if-no-ref/
+		pwm9m0_pins: pwm9m0-pins {
+			rockchip,pins =
+				/* pwm9_m0 */
+				<3 RK_PB2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm9m1_pins: pwm9m1-pins {
+			rockchip,pins =
+				/* pwm9_m1 */
+				<1 RK_PD6 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm10 {
+		/omit-if-no-ref/
+		pwm10m0_pins: pwm10m0-pins {
+			rockchip,pins =
+				/* pwm10_m0 */
+				<3 RK_PB5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm10m1_pins: pwm10m1-pins {
+			rockchip,pins =
+				/* pwm10_m1 */
+				<2 RK_PA1 2 &pcfg_pull_none>;
+		};
+	};
+
+	pwm11 {
+		/omit-if-no-ref/
+		pwm11m0_pins: pwm11m0-pins {
+			rockchip,pins =
+				/* pwm11_irm0 */
+				<3 RK_PB6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m1_pins: pwm11m1-pins {
+			rockchip,pins =
+				/* pwm11_irm1 */
+				<4 RK_PC0 3 &pcfg_pull_none>;
+		};
+	};
+
+	pwm12 {
+		/omit-if-no-ref/
+		pwm12m0_pins: pwm12m0-pins {
+			rockchip,pins =
+				/* pwm12_m0 */
+				<3 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm12m1_pins: pwm12m1-pins {
+			rockchip,pins =
+				/* pwm12_m1 */
+				<4 RK_PC5 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm13 {
+		/omit-if-no-ref/
+		pwm13m0_pins: pwm13m0-pins {
+			rockchip,pins =
+				/* pwm13_m0 */
+				<3 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm13m1_pins: pwm13m1-pins {
+			rockchip,pins =
+				/* pwm13_m1 */
+				<4 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm14 {
+		/omit-if-no-ref/
+		pwm14m0_pins: pwm14m0-pins {
+			rockchip,pins =
+				/* pwm14_m0 */
+				<3 RK_PC4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm14m1_pins: pwm14m1-pins {
+			rockchip,pins =
+				/* pwm14_m1 */
+				<4 RK_PC2 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm15 {
+		/omit-if-no-ref/
+		pwm15m0_pins: pwm15m0-pins {
+			rockchip,pins =
+				/* pwm15_irm0 */
+				<3 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m1_pins: pwm15m1-pins {
+			rockchip,pins =
+				/* pwm15_irm1 */
+				<4 RK_PC3 1 &pcfg_pull_none>;
+		};
+	};
+
+	refclk {
+		/omit-if-no-ref/
+		refclk_pins: refclk-pins {
+			rockchip,pins =
+				/* refclk_ou */
+				<0 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	sata {
+		/omit-if-no-ref/
+		sata_pins: sata-pins {
+			rockchip,pins =
+				/* sata_cpdet */
+				<0 RK_PA4 2 &pcfg_pull_none>,
+				/* sata_cppod */
+				<0 RK_PA6 1 &pcfg_pull_none>,
+				/* sata_mpswitch */
+				<0 RK_PA5 2 &pcfg_pull_none>;
+		};
+	};
+
+	sata0 {
+		/omit-if-no-ref/
+		sata0_pins: sata0-pins {
+			rockchip,pins =
+				/* sata0_actled */
+				<4 RK_PC6 3 &pcfg_pull_none>;
+		};
+	};
+
+	sata1 {
+		/omit-if-no-ref/
+		sata1_pins: sata1-pins {
+			rockchip,pins =
+				/* sata1_actled */
+				<4 RK_PC5 3 &pcfg_pull_none>;
+		};
+	};
+
+	sata2 {
+		/omit-if-no-ref/
+		sata2_pins: sata2-pins {
+			rockchip,pins =
+				/* sata2_actled */
+				<4 RK_PC4 3 &pcfg_pull_none>;
+		};
+	};
+
+	scr {
+		/omit-if-no-ref/
+		scr_pins: scr-pins {
+			rockchip,pins =
+				/* scr_clk */
+				<1 RK_PA2 3 &pcfg_pull_none>,
+				/* scr_det */
+				<1 RK_PA7 3 &pcfg_pull_up>,
+				/* scr_io */
+				<1 RK_PA3 3 &pcfg_pull_up>,
+				/* scr_rst */
+				<1 RK_PA5 3 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc0 {
+		/omit-if-no-ref/
+		sdmmc0_bus4: sdmmc0-bus4 {
+			rockchip,pins =
+				/* sdmmc0_d0 */
+				<1 RK_PD5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d1 */
+				<1 RK_PD6 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d2 */
+				<1 RK_PD7 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d3 */
+				<2 RK_PA0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_clk: sdmmc0-clk {
+			rockchip,pins =
+				/* sdmmc0_clk */
+				<2 RK_PA2 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_cmd: sdmmc0-cmd {
+			rockchip,pins =
+				/* sdmmc0_cmd */
+				<2 RK_PA1 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_det: sdmmc0-det {
+			rockchip,pins =
+				/* sdmmc0_det */
+				<0 RK_PA4 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_pwren: sdmmc0-pwren {
+			rockchip,pins =
+				/* sdmmc0_pwren */
+				<0 RK_PA5 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc1 {
+		/omit-if-no-ref/
+		sdmmc1_bus4: sdmmc1-bus4 {
+			rockchip,pins =
+				/* sdmmc1_d0 */
+				<2 RK_PA3 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d1 */
+				<2 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d2 */
+				<2 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d3 */
+				<2 RK_PA6 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_clk: sdmmc1-clk {
+			rockchip,pins =
+				/* sdmmc1_clk */
+				<2 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_cmd: sdmmc1-cmd {
+			rockchip,pins =
+				/* sdmmc1_cmd */
+				<2 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_det: sdmmc1-det {
+			rockchip,pins =
+				/* sdmmc1_det */
+				<2 RK_PB2 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_pwren: sdmmc1-pwren {
+			rockchip,pins =
+				/* sdmmc1_pwren */
+				<2 RK_PB1 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc2 {
+		/omit-if-no-ref/
+		sdmmc2m0_bus4: sdmmc2m0-bus4 {
+			rockchip,pins =
+				/* sdmmc2_d0m0 */
+				<3 RK_PC6 3 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d1m0 */
+				<3 RK_PC7 3 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d2m0 */
+				<3 RK_PD0 3 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d3m0 */
+				<3 RK_PD1 3 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m0_clk: sdmmc2m0-clk {
+			rockchip,pins =
+				/* sdmmc2_clkm0 */
+				<3 RK_PD3 3 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m0_cmd: sdmmc2m0-cmd {
+			rockchip,pins =
+				/* sdmmc2_cmdm0 */
+				<3 RK_PD2 3 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m0_det: sdmmc2m0-det {
+			rockchip,pins =
+				/* sdmmc2_detm0 */
+				<3 RK_PD4 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m0_pwren: sdmmc2m0-pwren {
+			rockchip,pins =
+				/* sdmmc2m0_pwren */
+				<3 RK_PD5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_bus4: sdmmc2m1-bus4 {
+			rockchip,pins =
+				/* sdmmc2_d0m1 */
+				<3 RK_PA1 5 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d1m1 */
+				<3 RK_PA2 5 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d2m1 */
+				<3 RK_PA3 5 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d3m1 */
+				<3 RK_PA4 5 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_clk: sdmmc2m1-clk {
+			rockchip,pins =
+				/* sdmmc2_clkm1 */
+				<3 RK_PA6 5 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_cmd: sdmmc2m1-cmd {
+			rockchip,pins =
+				/* sdmmc2_cmdm1 */
+				<3 RK_PA5 5 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_det: sdmmc2m1-det {
+			rockchip,pins =
+				/* sdmmc2_detm1 */
+				<3 RK_PA7 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_pwren: sdmmc2m1-pwren {
+			rockchip,pins =
+				/* sdmmc2m1_pwren */
+				<3 RK_PB0 4 &pcfg_pull_none>;
+		};
+	};
+
+	spdif {
+		/omit-if-no-ref/
+		spdifm0_tx: spdifm0-tx {
+			rockchip,pins =
+				/* spdifm0_tx */
+				<1 RK_PA4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm1_tx: spdifm1-tx {
+			rockchip,pins =
+				/* spdifm1_tx */
+				<3 RK_PC5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm2_tx: spdifm2-tx {
+			rockchip,pins =
+				/* spdifm2_tx */
+				<4 RK_PC4 2 &pcfg_pull_none>;
+		};
+	};
+
+	spi0 {
+		/omit-if-no-ref/
+		spi0m0_pins: spi0m0-pins {
+			rockchip,pins =
+				/* spi0_clkm0 */
+				<0 RK_PB5 2 &pcfg_pull_none>,
+				/* spi0_misom0 */
+				<0 RK_PC5 2 &pcfg_pull_none>,
+				/* spi0_mosim0 */
+				<0 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs0: spi0m0-cs0 {
+			rockchip,pins =
+				/* spi0_cs0m0 */
+				<0 RK_PC6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs1: spi0m0-cs1 {
+			rockchip,pins =
+				/* spi0_cs1m0 */
+				<0 RK_PC4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_pins: spi0m1-pins {
+			rockchip,pins =
+				/* spi0_clkm1 */
+				<2 RK_PD3 3 &pcfg_pull_none>,
+				/* spi0_misom1 */
+				<2 RK_PD0 3 &pcfg_pull_none>,
+				/* spi0_mosim1 */
+				<2 RK_PD1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_cs0: spi0m1-cs0 {
+			rockchip,pins =
+				/* spi0_cs0m1 */
+				<2 RK_PD2 3 &pcfg_pull_none>;
+		};
+	};
+
+	spi1 {
+		/omit-if-no-ref/
+		spi1m0_pins: spi1m0-pins {
+			rockchip,pins =
+				/* spi1_clkm0 */
+				<2 RK_PB5 3 &pcfg_pull_none>,
+				/* spi1_misom0 */
+				<2 RK_PB6 3 &pcfg_pull_none>,
+				/* spi1_mosim0 */
+				<2 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs0: spi1m0-cs0 {
+			rockchip,pins =
+				/* spi1_cs0m0 */
+				<2 RK_PC0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs1: spi1m0-cs1 {
+			rockchip,pins =
+				/* spi1_cs1m0 */
+				<2 RK_PC6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_pins: spi1m1-pins {
+			rockchip,pins =
+				/* spi1_clkm1 */
+				<3 RK_PC3 3 &pcfg_pull_none>,
+				/* spi1_misom1 */
+				<3 RK_PC2 3 &pcfg_pull_none>,
+				/* spi1_mosim1 */
+				<3 RK_PC1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_cs0: spi1m1-cs0 {
+			rockchip,pins =
+				/* spi1_cs0m1 */
+				<3 RK_PA1 3 &pcfg_pull_none>;
+		};
+	};
+
+	spi2 {
+		/omit-if-no-ref/
+		spi2m0_pins: spi2m0-pins {
+			rockchip,pins =
+				/* spi2_clkm0 */
+				<2 RK_PC1 4 &pcfg_pull_none>,
+				/* spi2_misom0 */
+				<2 RK_PC2 4 &pcfg_pull_none>,
+				/* spi2_mosim0 */
+				<2 RK_PC3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs0: spi2m0-cs0 {
+			rockchip,pins =
+				/* spi2_cs0m0 */
+				<2 RK_PC4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs1: spi2m0-cs1 {
+			rockchip,pins =
+				/* spi2_cs1m0 */
+				<2 RK_PC5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_pins: spi2m1-pins {
+			rockchip,pins =
+				/* spi2_clkm1 */
+				<3 RK_PA0 3 &pcfg_pull_none>,
+				/* spi2_misom1 */
+				<2 RK_PD7 3 &pcfg_pull_none>,
+				/* spi2_mosim1 */
+				<2 RK_PD6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs0: spi2m1-cs0 {
+			rockchip,pins =
+				/* spi2_cs0m1 */
+				<2 RK_PD5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs1: spi2m1-cs1 {
+			rockchip,pins =
+				/* spi2_cs1m1 */
+				<2 RK_PD4 3 &pcfg_pull_none>;
+		};
+	};
+
+	spi3 {
+		/omit-if-no-ref/
+		spi3m0_pins: spi3m0-pins {
+			rockchip,pins =
+				/* spi3_clkm0 */
+				<4 RK_PB3 4 &pcfg_pull_none>,
+				/* spi3_misom0 */
+				<4 RK_PB0 4 &pcfg_pull_none>,
+				/* spi3_mosim0 */
+				<4 RK_PB2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs0: spi3m0-cs0 {
+			rockchip,pins =
+				/* spi3_cs0m0 */
+				<4 RK_PA6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs1: spi3m0-cs1 {
+			rockchip,pins =
+				/* spi3_cs1m0 */
+				<4 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_pins: spi3m1-pins {
+			rockchip,pins =
+				/* spi3_clkm1 */
+				<4 RK_PC2 2 &pcfg_pull_none>,
+				/* spi3_misom1 */
+				<4 RK_PC5 2 &pcfg_pull_none>,
+				/* spi3_mosim1 */
+				<4 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs0: spi3m1-cs0 {
+			rockchip,pins =
+				/* spi3_cs0m1 */
+				<4 RK_PC6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs1: spi3m1-cs1 {
+			rockchip,pins =
+				/* spi3_cs1m1 */
+				<4 RK_PD1 2 &pcfg_pull_none>;
+		};
+	};
+
+	tsadc {
+		/omit-if-no-ref/
+		tsadcm0_shut: tsadcm0-shut {
+			rockchip,pins =
+				/* tsadcm0_shut */
+				<0 RK_PA1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadcm1_shut: tsadcm1-shut {
+			rockchip,pins =
+				/* tsadcm1_shut */
+				<0 RK_PA2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadc_shutorg: tsadc-shutorg {
+			rockchip,pins =
+				/* tsadc_shutorg */
+				<0 RK_PA1 2 &pcfg_pull_none>;
+		};
+	};
+
+	uart0 {
+		/omit-if-no-ref/
+		uart0_xfer: uart0-xfer {
+			rockchip,pins =
+				/* uart0_rx */
+				<0 RK_PC0 3 &pcfg_pull_up>,
+				/* uart0_tx */
+				<0 RK_PC1 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0_ctsn: uart0-ctsn {
+			rockchip,pins =
+				/* uart0_ctsn */
+				<0 RK_PC7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart0_rtsn: uart0-rtsn {
+			rockchip,pins =
+				/* uart0_rtsn */
+				<0 RK_PC4 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rxm0 */
+				<2 RK_PB3 2 &pcfg_pull_up>,
+				/* uart1_txm0 */
+				<2 RK_PB4 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_ctsn: uart1m0-ctsn {
+			rockchip,pins =
+				/* uart1m0_ctsn */
+				<2 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_rtsn: uart1m0-rtsn {
+			rockchip,pins =
+				/* uart1m0_rtsn */
+				<2 RK_PB5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_xfer: uart1m1-xfer {
+			rockchip,pins =
+				/* uart1_rxm1 */
+				<3 RK_PD7 4 &pcfg_pull_up>,
+				/* uart1_txm1 */
+				<3 RK_PD6 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_ctsn: uart1m1-ctsn {
+			rockchip,pins =
+				/* uart1m1_ctsn */
+				<4 RK_PC1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_rtsn: uart1m1-rtsn {
+			rockchip,pins =
+				/* uart1m1_rtsn */
+				<4 RK_PB6 4 &pcfg_pull_none>;
+		};
+	};
+
+	uart2 {
+		/omit-if-no-ref/
+		uart2m0_xfer: uart2m0-xfer {
+			rockchip,pins =
+				/* uart2_rxm0 */
+				<0 RK_PD0 1 &pcfg_pull_up>,
+				/* uart2_txm0 */
+				<0 RK_PD1 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rxm1 */
+				<1 RK_PD6 2 &pcfg_pull_up>,
+				/* uart2_txm1 */
+				<1 RK_PD5 2 &pcfg_pull_up>;
+		};
+	};
+
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rxm0 */
+				<1 RK_PA0 2 &pcfg_pull_up>,
+				/* uart3_txm0 */
+				<1 RK_PA1 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m0_ctsn: uart3m0-ctsn {
+			rockchip,pins =
+				/* uart3m0_ctsn */
+				<1 RK_PA3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart3m0_rtsn: uart3m0-rtsn {
+			rockchip,pins =
+				/* uart3m0_rtsn */
+				<1 RK_PA2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart3m1_xfer: uart3m1-xfer {
+			rockchip,pins =
+				/* uart3_rxm1 */
+				<3 RK_PC0 4 &pcfg_pull_up>,
+				/* uart3_txm1 */
+				<3 RK_PB7 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart4 {
+		/omit-if-no-ref/
+		uart4m0_xfer: uart4m0-xfer {
+			rockchip,pins =
+				/* uart4_rxm0 */
+				<1 RK_PA4 2 &pcfg_pull_up>,
+				/* uart4_txm0 */
+				<1 RK_PA6 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m0_ctsn: uart4m0-ctsn {
+			rockchip,pins =
+				/* uart4m0_ctsn */
+				<1 RK_PA7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart4m0_rtsn: uart4m0-rtsn {
+			rockchip,pins =
+				/* uart4m0_rtsn */
+				<1 RK_PA5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart4m1_xfer: uart4m1-xfer {
+			rockchip,pins =
+				/* uart4_rxm1 */
+				<3 RK_PB1 4 &pcfg_pull_up>,
+				/* uart4_txm1 */
+				<3 RK_PB2 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rxm0 */
+				<2 RK_PA1 3 &pcfg_pull_up>,
+				/* uart5_txm0 */
+				<2 RK_PA2 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_ctsn: uart5m0-ctsn {
+			rockchip,pins =
+				/* uart5m0_ctsn */
+				<1 RK_PD7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_rtsn: uart5m0-rtsn {
+			rockchip,pins =
+				/* uart5m0_rtsn */
+				<2 RK_PA0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_xfer: uart5m1-xfer {
+			rockchip,pins =
+				/* uart5_rxm1 */
+				<3 RK_PC3 4 &pcfg_pull_up>,
+				/* uart5_txm1 */
+				<3 RK_PC2 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart6 {
+		/omit-if-no-ref/
+		uart6m0_xfer: uart6m0-xfer {
+			rockchip,pins =
+				/* uart6_rxm0 */
+				<2 RK_PA3 3 &pcfg_pull_up>,
+				/* uart6_txm0 */
+				<2 RK_PA4 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_ctsn: uart6m0-ctsn {
+			rockchip,pins =
+				/* uart6m0_ctsn */
+				<2 RK_PC0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_rtsn: uart6m0-rtsn {
+			rockchip,pins =
+				/* uart6m0_rtsn */
+				<2 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_xfer: uart6m1-xfer {
+			rockchip,pins =
+				/* uart6_rxm1 */
+				<1 RK_PD6 3 &pcfg_pull_up>,
+				/* uart6_txm1 */
+				<1 RK_PD5 3 &pcfg_pull_up>;
+		};
+	};
+
+	uart7 {
+		/omit-if-no-ref/
+		uart7m0_xfer: uart7m0-xfer {
+			rockchip,pins =
+				/* uart7_rxm0 */
+				<2 RK_PA5 3 &pcfg_pull_up>,
+				/* uart7_txm0 */
+				<2 RK_PA6 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_ctsn: uart7m0-ctsn {
+			rockchip,pins =
+				/* uart7m0_ctsn */
+				<2 RK_PC2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_rtsn: uart7m0-rtsn {
+			rockchip,pins =
+				/* uart7m0_rtsn */
+				<2 RK_PC1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_xfer: uart7m1-xfer {
+			rockchip,pins =
+				/* uart7_rxm1 */
+				<3 RK_PC5 4 &pcfg_pull_up>,
+				/* uart7_txm1 */
+				<3 RK_PC4 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m2_xfer: uart7m2-xfer {
+			rockchip,pins =
+				/* uart7_rxm2 */
+				<4 RK_PA3 4 &pcfg_pull_up>,
+				/* uart7_txm2 */
+				<4 RK_PA2 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart8 {
+		/omit-if-no-ref/
+		uart8m0_xfer: uart8m0-xfer {
+			rockchip,pins =
+				/* uart8_rxm0 */
+				<2 RK_PC6 2 &pcfg_pull_up>,
+				/* uart8_txm0 */
+				<2 RK_PC5 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_ctsn: uart8m0-ctsn {
+			rockchip,pins =
+				/* uart8m0_ctsn */
+				<2 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_rtsn: uart8m0-rtsn {
+			rockchip,pins =
+				/* uart8m0_rtsn */
+				<2 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_xfer: uart8m1-xfer {
+			rockchip,pins =
+				/* uart8_rxm1 */
+				<3 RK_PA0 4 &pcfg_pull_up>,
+				/* uart8_txm1 */
+				<2 RK_PD7 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart9 {
+		/omit-if-no-ref/
+		uart9m0_xfer: uart9m0-xfer {
+			rockchip,pins =
+				/* uart9_rxm0 */
+				<2 RK_PA7 3 &pcfg_pull_up>,
+				/* uart9_txm0 */
+				<2 RK_PB0 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_ctsn: uart9m0-ctsn {
+			rockchip,pins =
+				/* uart9m0_ctsn */
+				<2 RK_PC4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_rtsn: uart9m0-rtsn {
+			rockchip,pins =
+				/* uart9m0_rtsn */
+				<2 RK_PC3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m1_xfer: uart9m1-xfer {
+			rockchip,pins =
+				/* uart9_rxm1 */
+				<4 RK_PC6 4 &pcfg_pull_up>,
+				/* uart9_txm1 */
+				<4 RK_PC5 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m2_xfer: uart9m2-xfer {
+			rockchip,pins =
+				/* uart9_rxm2 */
+				<4 RK_PA5 4 &pcfg_pull_up>,
+				/* uart9_txm2 */
+				<4 RK_PA4 4 &pcfg_pull_up>;
+		};
+	};
+
+	vop {
+		/omit-if-no-ref/
+		vopm0_pins: vopm0-pins {
+			rockchip,pins =
+				/* vop_pwmm0 */
+				<0 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		vopm1_pins: vopm1-pins {
+			rockchip,pins =
+				/* vop_pwmm1 */
+				<3 RK_PC4 2 &pcfg_pull_none>;
+		};
+	};
+};
+
+/*
+ * This part is edited handly.
+ */
+&pinctrl {
+	spi0-hs {
+		/omit-if-no-ref/
+		spi0m0_pins_hs: spi0m0-pins {
+			rockchip,pins =
+				/* spi0_clkm0 */
+				<0 RK_PB5 2 &pcfg_pull_up_drv_level_1>,
+				/* spi0_misom0 */
+				<0 RK_PC5 2 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosim0 */
+				<0 RK_PB6 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs0_hs: spi0m0-cs0 {
+			rockchip,pins =
+				/* spi0_cs0m0 */
+				<0 RK_PC6 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs1_hs: spi0m0-cs1 {
+			rockchip,pins =
+				/* spi0_cs1m0 */
+				<0 RK_PC4 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_pins_hs: spi0m1-pins {
+			rockchip,pins =
+				/* spi0_clkm1 */
+				<2 RK_PD3 3 &pcfg_pull_up_drv_level_1>,
+				/* spi0_misom1 */
+				<2 RK_PD0 3 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosim1 */
+				<2 RK_PD1 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_cs0_hs: spi0m1-cs0 {
+			rockchip,pins =
+				/* spi0_cs0m1 */
+				<2 RK_PD2 3 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi1-hs {
+		/omit-if-no-ref/
+		spi1m0_pins_hs: spi1m0-pins {
+			rockchip,pins =
+				/* spi1_clkm0 */
+				<2 RK_PB5 3 &pcfg_pull_up_drv_level_1>,
+				/* spi1_misom0 */
+				<2 RK_PB6 3 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosim0 */
+				<2 RK_PB7 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs0_hs: spi1m0-cs0 {
+			rockchip,pins =
+				/* spi1_cs0m0 */
+				<2 RK_PC0 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs1_hs: spi1m0-cs1 {
+			rockchip,pins =
+				/* spi1_cs1m0 */
+				<2 RK_PC6 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_pins_hs: spi1m1-pins {
+			rockchip,pins =
+				/* spi1_clkm1 */
+				<3 RK_PC3 3 &pcfg_pull_up_drv_level_1>,
+				/* spi1_misom1 */
+				<3 RK_PC2 3 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosim1 */
+				<3 RK_PC1 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_cs0_hs: spi1m1-cs0 {
+			rockchip,pins =
+				/* spi1_cs0m1 */
+				<3 RK_PA1 3 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi2-hs {
+		/omit-if-no-ref/
+		spi2m0_pins_hs: spi2m0-pins {
+			rockchip,pins =
+				/* spi2_clkm0 */
+				<2 RK_PC1 4 &pcfg_pull_up_drv_level_1>,
+				/* spi2_misom0 */
+				<2 RK_PC2 4 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosim0 */
+				<2 RK_PC3 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs0_hs: spi2m0-cs0 {
+			rockchip,pins =
+				/* spi2_cs0m0 */
+				<2 RK_PC4 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs1_hs: spi2m0-cs1 {
+			rockchip,pins =
+				/* spi2_cs1m0 */
+				<2 RK_PC5 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_pins_hs: spi2m1-pins {
+			rockchip,pins =
+				/* spi2_clkm1 */
+				<3 RK_PA0 3 &pcfg_pull_up_drv_level_1>,
+				/* spi2_misom1 */
+				<2 RK_PD7 3 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosim1 */
+				<2 RK_PD6 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs0_hs: spi2m1-cs0 {
+			rockchip,pins =
+				/* spi2_cs0m1 */
+				<2 RK_PD5 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs1_hs: spi2m1-cs1 {
+			rockchip,pins =
+				/* spi2_cs1m1 */
+				<2 RK_PD4 3 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi3-hs {
+		/omit-if-no-ref/
+		spi3m0_pins_hs: spi3m0-pins {
+			rockchip,pins =
+				/* spi3_clkm0 */
+				<4 RK_PB3 4 &pcfg_pull_up_drv_level_1>,
+				/* spi3_misom0 */
+				<4 RK_PB0 4 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosim0 */
+				<4 RK_PB2 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs0_hs: spi3m0-cs0 {
+			rockchip,pins =
+				/* spi3_cs0m0 */
+				<4 RK_PA6 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs1_hs: spi3m0-cs1 {
+			rockchip,pins =
+				/* spi3_cs1m0 */
+				<4 RK_PA7 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_pins_hs: spi3m1-pins {
+			rockchip,pins =
+				/* spi3_clkm1 */
+				<4 RK_PC2 2 &pcfg_pull_up_drv_level_1>,
+				/* spi3_misom1 */
+				<4 RK_PC5 2 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosim1 */
+				<4 RK_PC3 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs0_hs: spi3m1-cs0 {
+			rockchip,pins =
+				/* spi3_cs0m1 */
+				<4 RK_PC6 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs1_hs: spi3m1-cs1 {
+			rockchip,pins =
+				/* spi3_cs1m1 */
+				<4 RK_PD1 2 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	gmac-txd-level3 {
+		/omit-if-no-ref/
+		gmac0_tx_bus2_level3: gmac0-tx-bus2-level3 {
+			rockchip,pins =
+				/* gmac0_txd0 */
+				<2 RK_PB3 1 &pcfg_pull_none_drv_level_3>,
+				/* gmac0_txd1 */
+				<2 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* gmac0_txen */
+				<2 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_bus_level3: gmac0-rgmii-bus-level3 {
+			rockchip,pins =
+				/* gmac0_rxd2 */
+				<2 RK_PA3 2 &pcfg_pull_none>,
+				/* gmac0_rxd3 */
+				<2 RK_PA4 2 &pcfg_pull_none>,
+				/* gmac0_txd2 */
+				<2 RK_PA6 2 &pcfg_pull_none_drv_level_3>,
+				/* gmac0_txd3 */
+				<2 RK_PA7 2 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_tx_bus2_level3: gmac1m0-tx-bus2-level3 {
+			rockchip,pins =
+				/* gmac1_txd0m0 */
+				<3 RK_PB5 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txd1m0 */
+				<3 RK_PB6 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txenm0 */
+				<3 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rgmii_bus_level3: gmac1m0-rgmii-bus-level3 {
+			rockchip,pins =
+				/* gmac1_rxd2m0 */
+				<3 RK_PA4 3 &pcfg_pull_none>,
+				/* gmac1_rxd3m0 */
+				<3 RK_PA5 3 &pcfg_pull_none>,
+				/* gmac1_txd2m0 */
+				<3 RK_PA2 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txd3m0 */
+				<3 RK_PA3 3 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_tx_bus2_level3: gmac1m1-tx-bus2-level3 {
+			rockchip,pins =
+				/* gmac1_txd0m1 */
+				<4 RK_PA4 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txd1m1 */
+				<4 RK_PA5 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txenm1 */
+				<4 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rgmii_bus_level3: gmac1m1-rgmii-bus-level3 {
+			rockchip,pins =
+				/* gmac1_rxd2m1 */
+				<4 RK_PA1 3 &pcfg_pull_none>,
+				/* gmac1_rxd3m1 */
+				<4 RK_PA2 3 &pcfg_pull_none>,
+				/* gmac1_txd2m1 */
+				<3 RK_PD6 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txd3m1 */
+				<3 RK_PD7 3 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+
+	gmac-txc-level2 {
+		/omit-if-no-ref/
+		gmac0_rgmii_clk_level2: gmac0-rgmii-clk-level2 {
+			rockchip,pins =
+				/* gmac0_rxclk */
+				<2 RK_PA5 2 &pcfg_pull_none>,
+				/* gmac0_txclk */
+				<2 RK_PB0 2 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rgmii_clk_level2: gmac1m0-rgmii-clk-level2 {
+			rockchip,pins =
+				/* gmac1_rxclkm0 */
+				<3 RK_PA7 3 &pcfg_pull_none>,
+				/* gmac1_txclkm0 */
+				<3 RK_PA6 3 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rgmii_clk_level2: gmac1m1-rgmii-clk-level2 {
+			rockchip,pins =
+				/* gmac1_rxclkm1 */
+				<4 RK_PA3 3 &pcfg_pull_none>,
+				/* gmac1_txclkm1 */
+				<4 RK_PA0 3 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	tsadc {
+		/omit-if-no-ref/
+		tsadc_pin: tsadc-pin {
+			rockchip,pins =
+				/* tsadc_pin */
+				<0 RK_PA1 0 &pcfg_pull_none>;
+		};
+	};
+
+	lcdc {
+		/omit-if-no-ref/
+		lcdc_clock: lcdc-clock {
+			rockchip,pins =
+				/* lcdc_clk */
+				<3 RK_PA0 1 &pcfg_pull_none>,
+				/* lcdc_den */
+				<3 RK_PC3 1 &pcfg_pull_none>,
+				/* lcdc_hsync */
+				<3 RK_PC1 1 &pcfg_pull_none>,
+				/* lcdc_vsync */
+				<3 RK_PC2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		lcdc_data16: lcdc-data16 {
+			rockchip,pins =
+				/* lcdc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_none>,
+				/* lcdc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_none>,
+				/* lcdc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_none>,
+				/* lcdc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_none>,
+				/* lcdc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_none>,
+				/* lcdc_d10 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* lcdc_d11 */
+				<3 RK_PA4 1 &pcfg_pull_none>,
+				/* lcdc_d12 */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* lcdc_d13 */
+				<3 RK_PA6 1 &pcfg_pull_none>,
+				/* lcdc_d14 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* lcdc_d15 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* lcdc_d19 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* lcdc_d20 */
+				<3 RK_PB5 1 &pcfg_pull_none>,
+				/* lcdc_d21 */
+				<3 RK_PB6 1 &pcfg_pull_none>,
+				/* lcdc_d22 */
+				<3 RK_PB7 1 &pcfg_pull_none>,
+				/* lcdc_d23 */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		lcdc_data18: lcdc-data18 {
+			rockchip,pins =
+				/* lcdc_d2 */
+				<2 RK_PD2 1 &pcfg_pull_none>,
+				/* lcdc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_none>,
+				/* lcdc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_none>,
+				/* lcdc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_none>,
+				/* lcdc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_none>,
+				/* lcdc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_none>,
+				/* lcdc_d10 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* lcdc_d11 */
+				<3 RK_PA4 1 &pcfg_pull_none>,
+				/* lcdc_d12 */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* lcdc_d13 */
+				<3 RK_PA6 1 &pcfg_pull_none>,
+				/* lcdc_d14 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* lcdc_d15 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* lcdc_d18 */
+				<3 RK_PB3 1 &pcfg_pull_none>,
+				/* lcdc_d19 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* lcdc_d20 */
+				<3 RK_PB5 1 &pcfg_pull_none>,
+				/* lcdc_d21 */
+				<3 RK_PB6 1 &pcfg_pull_none>,
+				/* lcdc_d22 */
+				<3 RK_PB7 1 &pcfg_pull_none>,
+				/* lcdc_d23 */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
new file mode 100644
index 0000000000..45b03dcbba
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3568.dtsi"
+
+/ {
+	compatible = "radxa,cm3i", "rockchip,rk3568";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_user: led-0 {
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_user_en>;
+		};
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v_input>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_input>;
+	};
+
+	/* labeled +5v_input in schematic */
+	vcc5v_input: vcc5v-input-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v_input";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&display_subsystem {
+	status = "disabled";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v_input>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	leds {
+		led_user_en: led_user_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
new file mode 100644
index 0000000000..72ad74c38a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3568-radxa-cm3i.dtsi"
+
+/ {
+	model = "Radxa E25 Carrier Board";
+	compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
+
+	aliases {
+		mmc1 = &sdmmc0;
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			max-brightness = <255>;
+
+			led-red {
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm1 0 1000000 0>;
+			};
+
+			led-green {
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm2 0 1000000 0>;
+			};
+
+			led-blue {
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm12 0 1000000 0>;
+			};
+		};
+	};
+
+	vbus_typec: vbus-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus_typec_en>;
+		regulator-name = "vbus_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc5v0_sys, dependent
+	 * on pi6c clock generator
+	 */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&minipcie_enable_h>;
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ngffpcie_enable_h>;
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie30x1_enable_h>;
+		regulator-name = "vcc3v3_pcie30x1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	phy-supply = <&vcc3v3_pcie30x1>;
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x1m0_pins>;
+	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2_reset_h>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcie {
+		pcie20_reset_h: pcie20-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x1_enable_h: pcie30x1-enable-h {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x2_reset_h: pcie30x2-reset-h {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		minipcie_enable_h: minipcie-enable-h {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		ngffpcie_enable_h: ngffpcie-enable-h {
+			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vbus_typec_en: vbus_typec_en {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm12m1_pins>;
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	/* Also used in pcie30x1_clkreqnm0 */
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vbus_typec>;
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
new file mode 100644
index 0000000000..e333449ead
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Firefly Station P2";
+	compatible = "firefly,rk3568-roc-pc", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	gmac0_clkin: external-gmac0-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac0_clkin";
+		#clock-cells = <0>;
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			label = "user-led";
+			default-state = "on";
+			gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_enable_h>;
+			retain-state-suspended;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
+		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_otg_en>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&combphy0 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy1 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy2 {
+	/* used for SATA */
+	status = "okay";
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&gmac0_clkin>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+			&gmac0_tx_bus2
+			&gmac0_rx_bus2
+			&gmac0_rgmii_clk
+			&gmac0_rgmii_bus
+			&gmac0_clkinout>;
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+			&gmac1m1_tx_bus2
+			&gmac1m1_rx_bus2
+			&gmac1m1_rgmii_clk
+			&gmac1m1_rgmii_bus
+			&gmac1m1_clkinout>;
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x26>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pin>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		user_led_enable_h: user-led-enable-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_reset_pin: pcie-reset-pin {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
new file mode 100644
index 0000000000..e05ab11981
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Radxa ROCK3 Model A";
+	compatible = "radxa,rock3a", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_user: led-0 {
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_user_en>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+		reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator */
+	vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pi6c_03";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_hub: vcc5v0-usb-hub-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_hub_en>;
+		regulator-name = "vcc5v0_usb_hub";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc_cam: vcc-cam-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_cam_en>;
+		regulator-name = "vcc_cam";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_mipi: vcc-mipi-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_mipi_en>;
+		regulator-name = "vcc_mipi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_clkinout
+		     &gmac1m1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		codec {
+			mic-in-differential;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m1_xfer>;
+	status = "disabled";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m1_xfer>;
+	status = "disabled";
+};
+
+&i2c5 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&i2s2_2ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie30phy {
+	phy-supply = <&vcc3v3_pi6c_03>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2m1_pins>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	cam {
+		vcc_cam_en: vcc_cam_en {
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	display {
+		vcc_mipi_en: vcc_mipi_en {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		eth_phy_rst: eth_phy_rst {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_user_en: led_user_en {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_hub_en: vcc5v0_usb_hub_en {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake: bt-wake {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+		/* vddio comes from regulator on module, use IO bank voltage instead */
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
new file mode 100644
index 0000000000..f1be76a54c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk356x.dtsi"
+
+/ {
+	compatible = "rockchip,rk3568";
+
+	sata0: sata@fc000000 {
+		compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfc000000 0 0x1000>;
+		clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>,
+			 <&cru CLK_SATA0_RXOOB>;
+		clock-names = "sata", "pmalive", "rxoob";
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&combphy0 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&power RK3568_PD_PIPE>;
+		status = "disabled";
+	};
+
+	pipe_phy_grf0: syscon@fdc70000 {
+		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc70000 0x0 0x1000>;
+	};
+
+	qos_pcie3x1: qos@fe190080 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190080 0x0 0x20>;
+	};
+
+	qos_pcie3x2: qos@fe190100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190100 0x0 0x20>;
+	};
+
+	qos_sata0: qos@fe190200 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190200 0x0 0x20>;
+	};
+
+	pcie30_phy_grf: syscon@fdcb8000 {
+		compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfdcb8000 0x0 0x10000>;
+	};
+
+	pcie30phy: phy@fe8c0000 {
+		compatible = "rockchip,rk3568-pcie3-phy";
+		reg = <0x0 0xfe8c0000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>,
+			 <&cru PCLK_PCIE30PHY>;
+		clock-names = "refclk_m", "refclk_n", "pclk";
+		resets = <&cru SRST_PCIE30PHY>;
+		reset-names = "phy";
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
+
+	pcie3x1: pcie@fe270000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
+			 <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
+			 <&cru CLK_PCIE30X1_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
+				<0 0 0 2 &pcie3x1_intc 1>,
+				<0 0 0 3 &pcie3x1_intc 2>,
+				<0 0 0 4 &pcie3x1_intc 3>;
+		linux,pci-domain = <1>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x1000 0x1000>;
+		num-lanes = <1>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0400000 0x0 0x00400000>,
+		      <0x0 0xfe270000 0x0 0x00010000>,
+		      <0x0 0xf2000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X1_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane1 when using 1+1 */
+		status = "disabled";
+
+		pcie3x1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pcie3x2: pcie@fe280000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
+			 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
+			 <&cru CLK_PCIE30X2_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <2>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x2000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0800000 0x0 0x00400000>,
+		      <0x0 0xfe280000 0x0 0x00010000>,
+		      <0x0 0xf0000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X2_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane0 when using 1+1 */
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	gmac0: ethernet@fe2a0000 {
+		compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
+		reg = <0x0 0xfe2a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>,
+			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>,
+			 <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>,
+			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_refout",
+			      "aclk_mac", "pclk_mac",
+			      "clk_mac_speed", "ptp_ref";
+		resets = <&cru SRST_A_GMAC0>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,axi-config = <&gmac0_stmmac_axi_setup>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+		snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+		snps,tso;
+		status = "disabled";
+
+		mdio0: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		gmac0_stmmac_axi_setup: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,rd_osr_lmt = <8>;
+			snps,wr_osr_lmt = <4>;
+		};
+
+		gmac0_mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <1>;
+			queue0 {};
+		};
+
+		gmac0_mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <1>;
+			queue0 {};
+		};
+	};
+
+	combphy0: phy@fe820000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe820000 0x0 0x100>;
+		clocks = <&pmucru CLK_PCIEPHY0_REF>,
+			 <&cru PCLK_PIPEPHY0>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_PIPEPHY0>;
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+};
+
+&cpu0_opp_table {
+	opp-1992000000 {
+		opp-hz = /bits/ 64 <1992000000>;
+		opp-microvolt = <1150000 1150000 1150000>;
+	};
+};
+
+&pipegrf {
+	compatible = "rockchip,rk3568-pipe-grf", "syscon";
+};
+
+&power {
+	power-domain@RK3568_PD_PIPE {
+		reg = <RK3568_PD_PIPE>;
+		clocks = <&cru PCLK_PIPE>;
+		pm_qos = <&qos_pcie2x1>,
+			 <&qos_pcie3x1>,
+			 <&qos_pcie3x2>,
+			 <&qos_sata0>,
+			 <&qos_sata1>,
+			 <&qos_sata2>,
+			 <&qos_usb3_0>,
+			 <&qos_usb3_1>;
+		#power-domain-cells = <0>;
+	};
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+};
+
+&vop {
+	compatible = "rockchip,rk3568-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
new file mode 100644
index 0000000000..b7e2b475f0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -0,0 +1,1879 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rk3568-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3568-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+		serial8 = &uart8;
+		serial9 = &uart9;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&scmi_clk 0>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <900000 900000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000 900000 1150000>;
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <900000 900000 1150000>;
+			opp-suspend;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <900000 900000 1150000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <900000 900000 1150000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <975000 975000 1150000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1050000 1050000 1150000>;
+		};
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82000010>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <900000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		arm,no-tick-in-suspend;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	xin32k: xin32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		pinctrl-0 = <&clk32k_out0>;
+		pinctrl-names = "default";
+		#clock-cells = <0>;
+	};
+
+	sram@10f000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x0010f000 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x0010f000 0x100>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x100>;
+		};
+	};
+
+	sata1: sata@fc400000 {
+		compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfc400000 0 0x1000>;
+		clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>,
+			 <&cru CLK_SATA1_RXOOB>;
+		clock-names = "sata", "pmalive", "rxoob";
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&combphy1 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&power RK3568_PD_PIPE>;
+		status = "disabled";
+	};
+
+	sata2: sata@fc800000 {
+		compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfc800000 0 0x1000>;
+		clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>,
+			 <&cru CLK_SATA2_RXOOB>;
+		clock-names = "sata", "pmalive", "rxoob";
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&combphy2 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&power RK3568_PD_PIPE>;
+		status = "disabled";
+	};
+
+	usb_host0_xhci: usb@fcc00000 {
+		compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+		reg = <0x0 0xfcc00000 0x0 0x400000>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>,
+			 <&cru ACLK_USB3OTG0>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk";
+		dr_mode = "otg";
+		phy_type = "utmi_wide";
+		power-domains = <&power RK3568_PD_PIPE>;
+		resets = <&cru SRST_USB3OTG0>;
+		snps,dis_u2_susphy_quirk;
+		status = "disabled";
+	};
+
+	usb_host1_xhci: usb@fd000000 {
+		compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+		reg = <0x0 0xfd000000 0x0 0x400000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>,
+			 <&cru ACLK_USB3OTG1>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk";
+		dr_mode = "host";
+		phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>;
+		phy-names = "usb2-phy", "usb3-phy";
+		phy_type = "utmi_wide";
+		power-domains = <&power RK3568_PD_PIPE>;
+		resets = <&cru SRST_USB3OTG1>;
+		snps,dis_u2_susphy_quirk;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@fd400000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
+		      <0x0 0xfd460000 0 0x80000>; /* GICR */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		mbi-alias = <0x0 0xfd410000>;
+		mbi-ranges = <296 24>;
+		msi-controller;
+	};
+
+	usb_host0_ehci: usb@fd800000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfd800000 0x0 0x40000>;
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_otg>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@fd840000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfd840000 0x0 0x40000>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_otg>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@fd880000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfd880000 0x0 0x40000>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@fd8c0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfd8c0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	pmugrf: syscon@fdc20000 {
+		compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xfdc20000 0x0 0x10000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3568-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	pipegrf: syscon@fdc50000 {
+		reg = <0x0 0xfdc50000 0x0 0x1000>;
+	};
+
+	grf: syscon@fdc60000 {
+		compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xfdc60000 0x0 0x10000>;
+	};
+
+	pipe_phy_grf1: syscon@fdc80000 {
+		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc80000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf2: syscon@fdc90000 {
+		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc90000 0x0 0x1000>;
+	};
+
+	usb2phy0_grf: syscon@fdca0000 {
+		compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+		reg = <0x0 0xfdca0000 0x0 0x8000>;
+	};
+
+	usb2phy1_grf: syscon@fdca8000 {
+		compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+		reg = <0x0 0xfdca8000 0x0 0x8000>;
+	};
+
+	pmucru: clock-controller@fdd00000 {
+		compatible = "rockchip,rk3568-pmucru";
+		reg = <0x0 0xfdd00000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	cru: clock-controller@fdd20000 {
+		compatible = "rockchip,rk3568-cru";
+		reg = <0x0 0xfdd20000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, <&pmucru PLL_PPLL>;
+		assigned-clock-rates = <32768>, <1200000000>, <200000000>;
+		assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>;
+		rockchip,grf = <&grf>;
+	};
+
+	i2c0: i2c@fdd40000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfdd40000 0x0 0x1000>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@fdd50000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfdd50000 0x0 0x100>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 0>, <&dmac0 1>;
+		pinctrl-0 = <&uart0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@fdd70000 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfdd70000 0x0 0x10>;
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm0m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@fdd70010 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfdd70010 0x0 0x10>;
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm1m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@fdd70020 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfdd70020 0x0 0x10>;
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm2m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@fdd70030 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfdd70030 0x0 0x10>;
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm3_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pmu: power-management@fdd90000 {
+		compatible = "rockchip,rk3568-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xfdd90000 0x0 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3568-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_GPU */
+			power-domain@RK3568_PD_GPU {
+				reg = <RK3568_PD_GPU>;
+				clocks = <&cru ACLK_GPU_PRE>,
+					 <&cru PCLK_GPU_PRE>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+
+			/* These power domains are grouped by VD_LOGIC */
+			power-domain@RK3568_PD_VI {
+				reg = <RK3568_PD_VI>;
+				clocks = <&cru HCLK_VI>,
+					 <&cru PCLK_VI>;
+				pm_qos = <&qos_isp>,
+					 <&qos_vicap0>,
+					 <&qos_vicap1>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_VO {
+				reg = <RK3568_PD_VO>;
+				clocks = <&cru HCLK_VO>,
+					 <&cru PCLK_VO>,
+					 <&cru ACLK_VOP_PRE>;
+				pm_qos = <&qos_hdcp>,
+					 <&qos_vop_m0>,
+					 <&qos_vop_m1>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_RGA {
+				reg = <RK3568_PD_RGA>;
+				clocks = <&cru HCLK_RGA_PRE>,
+					 <&cru PCLK_RGA_PRE>;
+				pm_qos = <&qos_ebc>,
+					 <&qos_iep>,
+					 <&qos_jpeg_dec>,
+					 <&qos_jpeg_enc>,
+					 <&qos_rga_rd>,
+					 <&qos_rga_wr>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_VPU {
+				reg = <RK3568_PD_VPU>;
+				clocks = <&cru HCLK_VPU_PRE>;
+				pm_qos = <&qos_vpu>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_RKVDEC {
+				clocks = <&cru HCLK_RKVDEC_PRE>;
+				reg = <RK3568_PD_RKVDEC>;
+				pm_qos = <&qos_rkvdec>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_RKVENC {
+				reg = <RK3568_PD_RKVENC>;
+				clocks = <&cru HCLK_RKVENC_PRE>;
+				pm_qos = <&qos_rkvenc_rd_m0>,
+					 <&qos_rkvenc_rd_m1>,
+					 <&qos_rkvenc_wr_m0>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	gpu: gpu@fde60000 {
+		compatible = "rockchip,rk3568-mali", "arm,mali-bifrost";
+		reg = <0x0 0xfde60000 0x0 0x4000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&scmi_clk 1>, <&cru CLK_GPU>;
+		clock-names = "gpu", "bus";
+		#cooling-cells = <2>;
+		operating-points-v2 = <&gpu_opp_table>;
+		power-domains = <&power RK3568_PD_GPU>;
+		status = "disabled";
+	};
+
+	vpu: video-codec@fdea0400 {
+		compatible = "rockchip,rk3568-vpu";
+		reg = <0x0 0xfdea0000 0x0 0x800>;
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vdpu_mmu>;
+		power-domains = <&power RK3568_PD_VPU>;
+	};
+
+	vdpu_mmu: iommu@fdea0800 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdea0800 0x0 0x40>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "aclk", "iface";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		power-domains = <&power RK3568_PD_VPU>;
+		#iommu-cells = <0>;
+	};
+
+	rga: rga@fdeb0000 {
+		compatible = "rockchip,rk3568-rga", "rockchip,rk3288-rga";
+		reg = <0x0 0xfdeb0000 0x0 0x180>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru CLK_RGA_CORE>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
+		reset-names = "core", "axi", "ahb";
+		power-domains = <&power RK3568_PD_RGA>;
+	};
+
+	vepu: video-codec@fdee0000 {
+		compatible = "rockchip,rk3568-vepu";
+		reg = <0x0 0xfdee0000 0x0 0x800>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vepu_mmu>;
+		power-domains = <&power RK3568_PD_RGA>;
+	};
+
+	vepu_mmu: iommu@fdee0800 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdee0800 0x0 0x40>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3568_PD_RGA>;
+		#iommu-cells = <0>;
+	};
+
+	sdmmc2: mmc@fe000000 {
+		compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>,
+			 <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDMMC2>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	gmac1: ethernet@fe010000 {
+		compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
+		reg = <0x0 0xfe010000 0x0 0x10000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>,
+			 <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>,
+			 <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>,
+			 <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_refout",
+			      "aclk_mac", "pclk_mac",
+			      "clk_mac_speed", "ptp_ref";
+		resets = <&cru SRST_A_GMAC1>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,axi-config = <&gmac1_stmmac_axi_setup>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+		snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+		snps,tso;
+		status = "disabled";
+
+		mdio1: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		gmac1_stmmac_axi_setup: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,rd_osr_lmt = <8>;
+			snps,wr_osr_lmt = <4>;
+		};
+
+		gmac1_mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <1>;
+			queue0 {};
+		};
+
+		gmac1_mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <1>;
+			queue0 {};
+		};
+	};
+
+	vop: vop@fe040000 {
+		reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+		reg-names = "vop", "gamma-lut";
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>,
+			 <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
+		clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3568_PD_VO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp1: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp2: port@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fe043e00 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@fe060000 {
+		compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x00 0xfe060000 0x00 0x10000>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "pclk";
+		clocks = <&cru PCLK_DSITX_0>;
+		phy-names = "dphy";
+		phys = <&dsi_dphy0>;
+		power-domains = <&power RK3568_PD_VO>;
+		reset-names = "apb";
+		resets = <&cru SRST_P_DSITX_0>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi0_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	dsi1: dsi@fe070000 {
+		compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xfe070000 0x0 0x10000>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "pclk";
+		clocks = <&cru PCLK_DSITX_1>;
+		phy-names = "dphy";
+		phys = <&dsi_dphy1>;
+		power-domains = <&power RK3568_PD_VO>;
+		reset-names = "apb";
+		resets = <&cru SRST_P_DSITX_1>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi1_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	hdmi: hdmi@fe0a0000 {
+		compatible = "rockchip,rk3568-dw-hdmi";
+		reg = <0x0 0xfe0a0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI_HOST>,
+			 <&cru CLK_HDMI_SFR>,
+			 <&cru CLK_HDMI_CEC>,
+			 <&pmucru CLK_HDMI_REF>,
+			 <&cru HCLK_VO>;
+		clock-names = "iahb", "isfr", "cec", "ref";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
+		power-domains = <&power RK3568_PD_VO>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	qos_gpu: qos@fe128000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe128000 0x0 0x20>;
+	};
+
+	qos_rkvenc_rd_m0: qos@fe138080 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe138080 0x0 0x20>;
+	};
+
+	qos_rkvenc_rd_m1: qos@fe138100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe138100 0x0 0x20>;
+	};
+
+	qos_rkvenc_wr_m0: qos@fe138180 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe138180 0x0 0x20>;
+	};
+
+	qos_isp: qos@fe148000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe148000 0x0 0x20>;
+	};
+
+	qos_vicap0: qos@fe148080 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe148080 0x0 0x20>;
+	};
+
+	qos_vicap1: qos@fe148100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe148100 0x0 0x20>;
+	};
+
+	qos_vpu: qos@fe150000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe150000 0x0 0x20>;
+	};
+
+	qos_ebc: qos@fe158000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158000 0x0 0x20>;
+	};
+
+	qos_iep: qos@fe158100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158100 0x0 0x20>;
+	};
+
+	qos_jpeg_dec: qos@fe158180 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158180 0x0 0x20>;
+	};
+
+	qos_jpeg_enc: qos@fe158200 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158200 0x0 0x20>;
+	};
+
+	qos_rga_rd: qos@fe158280 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158280 0x0 0x20>;
+	};
+
+	qos_rga_wr: qos@fe158300 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158300 0x0 0x20>;
+	};
+
+	qos_npu: qos@fe180000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe180000 0x0 0x20>;
+	};
+
+	qos_pcie2x1: qos@fe190000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190000 0x0 0x20>;
+	};
+
+	qos_sata1: qos@fe190280 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190280 0x0 0x20>;
+	};
+
+	qos_sata2: qos@fe190300 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190300 0x0 0x20>;
+	};
+
+	qos_usb3_0: qos@fe190380 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190380 0x0 0x20>;
+	};
+
+	qos_usb3_1: qos@fe190400 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190400 0x0 0x20>;
+	};
+
+	qos_rkvdec: qos@fe198000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe198000 0x0 0x20>;
+	};
+
+	qos_hdcp: qos@fe1a8000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe1a8000 0x0 0x20>;
+	};
+
+	qos_vop_m0: qos@fe1a8080 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe1a8080 0x0 0x20>;
+	};
+
+	qos_vop_m1: qos@fe1a8100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe1a8100 0x0 0x20>;
+	};
+
+	pcie2x1: pcie@fe260000 {
+		compatible = "rockchip,rk3568-pcie";
+		reg = <0x3 0xc0000000 0x0 0x00400000>,
+		      <0x0 0xfe260000 0x0 0x00010000>,
+		      <0x0 0xf4000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
+			 <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
+			 <&cru CLK_PCIE20_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		linux,pci-domain = <0>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <2>;
+		msi-map = <0x0 &gic 0x0 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy2 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>;
+		resets = <&cru SRST_PCIE20_POWERUP>;
+		reset-names = "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie_intc: legacy-interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	sdmmc0: mmc@fe2b0000 {
+		compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe2b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>,
+			 <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDMMC0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdmmc1: mmc@fe2c0000 {
+		compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe2c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>,
+			 <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDMMC1>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sfc: spi@fe300000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xfe300000 0x0 0x4000>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&fspi_pins>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	sdhci: mmc@fe310000 {
+		compatible = "rockchip,rk3568-dwcmshc";
+		reg = <0x0 0xfe310000 0x0 0x10000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>;
+		assigned-clock-rates = <200000000>, <24000000>;
+		clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+			 <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+			 <&cru TCLK_EMMC>;
+		clock-names = "core", "bus", "axi", "block", "timer";
+		status = "disabled";
+	};
+
+	i2s0_8ch: i2s@fe400000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe400000 0x0 0x1000>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
+		assigned-clock-rates = <1188000000>, <1188000000>;
+		clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 0>;
+		dma-names = "tx";
+		resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1_8ch: i2s@fe410000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe410000 0x0 0x1000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_I2S1_8CH_TX_SRC>, <&cru CLK_I2S1_8CH_RX_SRC>;
+		assigned-clock-rates = <1188000000>, <1188000000>;
+		clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
+			 <&cru HCLK_I2S1_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 3>, <&dmac1 2>;
+		dma-names = "rx", "tx";
+		resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx
+			     &i2s1m0_lrcktx &i2s1m0_lrckrx
+			     &i2s1m0_sdi0   &i2s1m0_sdi1
+			     &i2s1m0_sdi2   &i2s1m0_sdi3
+			     &i2s1m0_sdo0   &i2s1m0_sdo1
+			     &i2s1m0_sdo2   &i2s1m0_sdo3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2_2ch: i2s@fe420000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe420000 0x0 0x1000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
+		assigned-clock-rates = <1188000000>;
+		clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 4>, <&dmac1 5>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S2_2CH>;
+		reset-names = "m";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2m0_sclktx
+				&i2s2m0_lrcktx
+				&i2s2m0_sdi
+				&i2s2m0_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s3_2ch: i2s@fe430000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe430000 0x0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>,
+			 <&cru HCLK_I2S3_2CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 6>, <&dmac1 7>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	pdm: pdm@fe440000 {
+		compatible = "rockchip,rk3568-pdm";
+		reg = <0x0 0xfe440000 0x0 0x1000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>;
+		clock-names = "pdm_clk", "pdm_hclk";
+		dmas = <&dmac1 9>;
+		dma-names = "rx";
+		pinctrl-0 = <&pdmm0_clk
+			     &pdmm0_clk1
+			     &pdmm0_sdi0
+			     &pdmm0_sdi1
+			     &pdmm0_sdi2
+			     &pdmm0_sdi3>;
+		pinctrl-names = "default";
+		resets = <&cru SRST_M_PDM>;
+		reset-names = "pdm-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	spdif: spdif@fe460000 {
+		compatible = "rockchip,rk3568-spdif";
+		reg = <0x0 0xfe460000 0x0 0x1000>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
+		dmas = <&dmac1 1>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdifm0_tx>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	dmac0: dma-controller@fe530000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfe530000 0x0 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_BUS>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	dmac1: dma-controller@fe550000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfe550000 0x0 0x4000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_BUS>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	i2c1: i2c@fe5a0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c1_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@fe5b0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5b0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c2m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@fe5c0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5c0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c3m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@fe5d0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5d0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c4m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@fe5e0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5e0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c5m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@fe600000 {
+		compatible = "rockchip,rk3568-wdt", "snps,dw-wdt";
+		reg = <0x0 0xfe600000 0x0 0x100>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>;
+		clock-names = "tclk", "pclk";
+	};
+
+	spi0: spi@fe610000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe610000 0x0 0x1000>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 20>, <&dmac0 21>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@fe620000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe620000 0x0 0x1000>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 22>, <&dmac0 23>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@fe630000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe630000 0x0 0x1000>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 24>, <&dmac0 25>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi3: spi@fe640000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe640000 0x0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 26>, <&dmac0 27>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart1: serial@fe650000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe650000 0x0 0x100>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 2>, <&dmac0 3>;
+		pinctrl-0 = <&uart1m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@fe660000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe660000 0x0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 4>, <&dmac0 5>;
+		pinctrl-0 = <&uart2m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart3: serial@fe670000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe670000 0x0 0x100>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 6>, <&dmac0 7>;
+		pinctrl-0 = <&uart3m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart4: serial@fe680000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe680000 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 8>, <&dmac0 9>;
+		pinctrl-0 = <&uart4m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart5: serial@fe690000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe690000 0x0 0x100>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 10>, <&dmac0 11>;
+		pinctrl-0 = <&uart5m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart6: serial@fe6a0000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe6a0000 0x0 0x100>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 12>, <&dmac0 13>;
+		pinctrl-0 = <&uart6m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart7: serial@fe6b0000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe6b0000 0x0 0x100>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 14>, <&dmac0 15>;
+		pinctrl-0 = <&uart7m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart8: serial@fe6c0000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe6c0000 0x0 0x100>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 16>, <&dmac0 17>;
+		pinctrl-0 = <&uart8m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart9: serial@fe6d0000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe6d0000 0x0 0x100>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 18>, <&dmac0 19>;
+		pinctrl-0 = <&uart9m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <20>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_threshold: gpu-threshold {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_target: gpu-target {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_target>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@fe710000 {
+		compatible = "rockchip,rk3568-tsadc";
+		reg = <0x0 0xfe710000 0x0 0x100>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>;
+		assigned-clock-rates = <17000000>, <700000>;
+		clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>,
+			 <&cru SRST_TSADCPHY>;
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <95000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&tsadc_pin>;
+		pinctrl-1 = <&tsadc_shutorg>;
+		pinctrl-2 = <&tsadc_pin>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	saradc: saradc@fe720000 {
+		compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xfe720000 0x0 0x100>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@fe6e0000 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6e0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm4_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@fe6e0010 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6e0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm5_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@fe6e0020 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6e0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm6_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@fe6e0030 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6e0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm7_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm8: pwm@fe6f0000 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6f0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm8m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm9: pwm@fe6f0010 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6f0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm9m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm10: pwm@fe6f0020 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6f0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm10m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm11: pwm@fe6f0030 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6f0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm11m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm12: pwm@fe700000 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe700000 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm12m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm13: pwm@fe700010 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe700010 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm13m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm14: pwm@fe700020 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe700020 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm14m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm15: pwm@fe700030 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe700030 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm15m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	combphy1: phy@fe830000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe830000 0x0 0x100>;
+		clocks = <&pmucru CLK_PCIEPHY1_REF>,
+			 <&cru PCLK_PIPEPHY1>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_PIPEPHY1>;
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	combphy2: phy@fe840000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe840000 0x0 0x100>;
+		clocks = <&pmucru CLK_PCIEPHY2_REF>,
+			 <&cru PCLK_PIPEPHY2>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_PIPEPHY2>;
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	csi_dphy: phy@fe870000 {
+		compatible = "rockchip,rk3568-csi-dphy";
+		reg = <0x0 0xfe870000 0x0 0x10000>;
+		clocks = <&cru PCLK_MIPICSIPHY>;
+		clock-names = "pclk";
+		#phy-cells = <0>;
+		resets = <&cru SRST_P_MIPICSIPHY>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	dsi_dphy0: mipi-dphy@fe850000 {
+		compatible = "rockchip,rk3568-dsi-dphy";
+		reg = <0x0 0xfe850000 0x0 0x10000>;
+		clock-names = "ref", "pclk";
+		clocks = <&pmucru CLK_MIPIDSIPHY0_REF>, <&cru PCLK_MIPIDSIPHY0>;
+		#phy-cells = <0>;
+		power-domains = <&power RK3568_PD_VO>;
+		reset-names = "apb";
+		resets = <&cru SRST_P_MIPIDSIPHY0>;
+		status = "disabled";
+	};
+
+	dsi_dphy1: mipi-dphy@fe860000 {
+		compatible = "rockchip,rk3568-dsi-dphy";
+		reg = <0x0 0xfe860000 0x0 0x10000>;
+		clock-names = "ref", "pclk";
+		clocks = <&pmucru CLK_MIPIDSIPHY1_REF>, <&cru PCLK_MIPIDSIPHY1>;
+		#phy-cells = <0>;
+		power-domains = <&power RK3568_PD_VO>;
+		reset-names = "apb";
+		resets = <&cru SRST_P_MIPIDSIPHY1>;
+		status = "disabled";
+	};
+
+	usb2phy0: usb2phy@fe8a0000 {
+		compatible = "rockchip,rk3568-usb2phy";
+		reg = <0x0 0xfe8a0000 0x0 0x10000>;
+		clocks = <&pmucru CLK_USBPHY0_REF>;
+		clock-names = "phyclk";
+		clock-output-names = "clk_usbphy0_480m";
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,usbgrf = <&usb2phy0_grf>;
+		#clock-cells = <0>;
+		status = "disabled";
+
+		usb2phy0_host: host-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2phy0_otg: otg-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	usb2phy1: usb2phy@fe8b0000 {
+		compatible = "rockchip,rk3568-usb2phy";
+		reg = <0x0 0xfe8b0000 0x0 0x10000>;
+		clocks = <&pmucru CLK_USBPHY1_REF>;
+		clock-names = "phyclk";
+		clock-output-names = "clk_usbphy1_480m";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,usbgrf = <&usb2phy1_grf>;
+		#clock-cells = <0>;
+		status = "disabled";
+
+		usb2phy1_host: host-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2phy1_otg: otg-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3568-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@fdd60000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfdd60000 0x0 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@fe740000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfe740000 0x0 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@fe750000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfe750000 0x0 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@fe760000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfe760000 0x0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@fe770000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfe770000 0x0 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+#include "rk3568-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
new file mode 100644
index 0000000000..b515438920
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rk3588.dtsi"
+#include "rk3588-edgeble-neu6a.dtsi"
+
+/ {
+	model = "Edgeble Neu6A IO Board";
+	compatible = "edgeble,neural-compute-module-6a-io",
+		     "edgeble,neural-compute-module-6a", "rockchip,rk3588";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi
new file mode 100644
index 0000000000..727580aaa1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	compatible = "edgeble,neural-compute-module-6a", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
new file mode 100644
index 0000000000..9933765e40
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rk3588j.dtsi"
+#include "rk3588-edgeble-neu6b.dtsi"
+
+/ {
+	model = "Edgeble Neu6B IO Board";
+	compatible = "edgeble,neural-compute-module-6b-io",
+		     "edgeble,neural-compute-module-6b", "rockchip,rk3588";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+/* FAN */
+&pwm2 {
+	pinctrl-0 = <&pwm2m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart6 {
+	pinctrl-0 = <&uart6m0_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* RS485 */
+&uart7 {
+	pinctrl-0 = <&uart7m2_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi
new file mode 100644
index 0000000000..017559bba3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	compatible = "edgeble,neural-compute-module-6b", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-init-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
new file mode 100644
index 0000000000..229a9111f5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -0,0 +1,847 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Rockchip RK3588 EVB1 V10 Board";
+	compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <2>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc5v0_sys>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_gpu_mem_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+				regulator-name = "vdd_gpu_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_npu_mem_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vdd_vdenc_mem_s0: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v1_nldo_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v1_nldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1100000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd1_1v8_ddr_s3: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd1_1v8_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_codec_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avcc_1v8_codec_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s3: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_1v8_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd2l_0v9_ddr_s3: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd2l_0v9_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_0v75_hdmi_edp_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_hdmi_edp_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	pmic@1 {
+		compatible = "rockchip,rk806";
+		reg = <0x01>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>,
+			    <&rk806_slave_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_slave_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_cpu_big1_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big1_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big0_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big0_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big1_mem_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big1_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+
+			vdd_cpu_big0_mem_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big0_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_mem_s0: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_cam_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v8_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd1v8_ddr_pll_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd1v8_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_1v8_pll_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_1v8_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_sd_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_2v8_cam_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_2v8_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_pll_s0: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_0v75_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v85_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_1v2_cam_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_1v2_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_1v2_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
new file mode 100644
index 0000000000..97af4f9128
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -0,0 +1,916 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Thomas McKahan
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPC-T6";
+	compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_led: led-0 {
+			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+			label = "system-led";
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sys_led_pin>;
+		};
+
+		usr_led: led-1 {
+			gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+			label = "user-led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usr_led_pin>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det>;
+
+		simple-audio-card,name = "realtek,rt5616-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-pin-name = "Headphones";
+
+		simple-audio-card,widgets =
+			"Headphone", "Headphones",
+			"Microphone", "Microphone Jack";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"MIC1", "Microphone Jack",
+			"Microphone Jack", "micbias1";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rt5616>;
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* vcc5v0_sys powers peripherals */
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	/* vcc4v0_sys powers the RK806, RK860's */
+	vcc4v0_sys: vcc4v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc4v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-1v1-nldo-s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc4v0_sys>;
+	};
+
+	vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_pcie20";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vbus5v0_typec: vbus5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_m2_1_pwren>;
+		regulator-name = "vcc3v3_pcie2x1l0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_m2_0_pwren>;
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0{
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1{
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2{
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3{
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 C0-C7 */
+			  "", "", "", "",
+			  "HEADER_10", "HEADER_08", "HEADER_32", "",
+			  /* GPIO0 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A0-A7 */
+			  "HEADER_27", "HEADER_28", "", "",
+			  "", "", "", "HEADER_15",
+			  /* GPIO1 B0-B7 */
+			  "HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23",
+			  "HEADER_24", "HEADER_22", "", "",
+			  /* GPIO1 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO1 D0-D7 */
+			  "", "", "", "",
+			  "", "", "HEADER_05", "HEADER_03";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 C0-C7 */
+			  "", "CSI1_11", "CSI1_12", "",
+			  "", "", "", "",
+			  /* GPIO2 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A0-A7 */
+			  "HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36",
+			  "HEADER_37", "", "DSI0_12", "",
+			  /* GPIO3 B0-B7 */
+			  "HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16",
+			  "HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12",
+			  /* GPIO3 C0-C7 */
+			  "DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13",
+			  "", "", "", "",
+			  /* GPIO3 D0-D7 */
+			  "", "", "", "",
+			  "", "DSI1_10", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = /* GPIO4 A0-A7 */
+			  "DSI1_08", "DSI1_14", "", "DSI1_12",
+			  "", "", "", "",
+			  /* GPIO4 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO4 C0-C7 */
+			  "", "", "", "",
+			  "CSI0_11", "CSI0_12", "", "",
+			  /* GPIO4 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc4v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc4v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		rockchip,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc4v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <200000>;
+	status = "okay";
+
+	fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&usbc0_int>;
+		pinctrl-names = "default";
+		vbus-supply = <&vbus5v0_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <1000000>;
+		};
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <200000>;
+	status = "okay";
+
+	rt5616: codec@1b {
+		compatible = "realtek,rt5616";
+		reg = <0x1b>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+
+		port {
+			rt5616_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+
+	/* connected with MIPI-CSI1 */
+};
+
+&i2c8 {
+	pinctrl-0 = <&i2c8m2_xfer>;
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&rt5616_p0_0>;
+		};
+	};
+};
+
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie20>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>;
+	status = "okay";
+};
+
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_1_rst>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie20>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-leds {
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usr_led_pin: usr-led-pin {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_1_rst: pcie2-1-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_m2_0_pwren: pcie-m20-pwren {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_m2_1_pwren: pcie-m21-pwren {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		vcc1-supply = <&vcc4v0_sys>;
+		vcc2-supply = <&vcc4v0_sys>;
+		vcc3-supply = <&vcc4v0_sys>;
+		vcc4-supply = <&vcc4v0_sys>;
+		vcc5-supply = <&vcc4v0_sys>;
+		vcc6-supply = <&vcc4v0_sys>;
+		vcc7-supply = <&vcc4v0_sys>;
+		vcc8-supply = <&vcc4v0_sys>;
+		vcc9-supply = <&vcc4v0_sys>;
+		vcc10-supply = <&vcc4v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc4v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc4v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-init-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&u2phy2_host {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi
new file mode 100644
index 0000000000..244c66faa1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	clk32k {
+		/omit-if-no-ref/
+		clk32k_out1: clk32k-out1 {
+			rockchip,pins =
+				/* clk32k_out1 */
+				<2 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+	};
+
+	eth0 {
+		/omit-if-no-ref/
+		eth0_pins: eth0-pins {
+			rockchip,pins =
+				/* eth0_refclko_25m */
+				<2 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+	};
+
+	fspi {
+		/omit-if-no-ref/
+		fspim1_pins: fspim1-pins {
+			rockchip,pins =
+				/* fspi_clk_m1 */
+				<2 RK_PB3 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_cs0n_m1 */
+				<2 RK_PB4 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d0_m1 */
+				<2 RK_PA6 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d1_m1 */
+				<2 RK_PA7 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d2_m1 */
+				<2 RK_PB0 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d3_m1 */
+				<2 RK_PB1 3 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		fspim1_cs1: fspim1-cs1 {
+			rockchip,pins =
+				/* fspi_cs1n_m1 */
+				<2 RK_PB5 3 &pcfg_pull_up_drv_level_2>;
+		};
+	};
+
+	gmac0 {
+		/omit-if-no-ref/
+		gmac0_miim: gmac0-miim {
+			rockchip,pins =
+				/* gmac0_mdc */
+				<4 RK_PC4 1 &pcfg_pull_none>,
+				/* gmac0_mdio */
+				<4 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_clkinout: gmac0-clkinout {
+			rockchip,pins =
+				/* gmac0_mclkinout */
+				<4 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rx_bus2: gmac0-rx-bus2 {
+			rockchip,pins =
+				/* gmac0_rxd0 */
+				<2 RK_PC1 1 &pcfg_pull_none>,
+				/* gmac0_rxd1 */
+				<2 RK_PC2 1 &pcfg_pull_none>,
+				/* gmac0_rxdv_crs */
+				<4 RK_PC2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_tx_bus2: gmac0-tx-bus2 {
+			rockchip,pins =
+				/* gmac0_txd0 */
+				<2 RK_PB6 1 &pcfg_pull_none>,
+				/* gmac0_txd1 */
+				<2 RK_PB7 1 &pcfg_pull_none>,
+				/* gmac0_txen */
+				<2 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_clk: gmac0-rgmii-clk {
+			rockchip,pins =
+				/* gmac0_rxclk */
+				<2 RK_PB0 1 &pcfg_pull_none>,
+				/* gmac0_txclk */
+				<2 RK_PB3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_bus: gmac0-rgmii-bus {
+			rockchip,pins =
+				/* gmac0_rxd2 */
+				<2 RK_PA6 1 &pcfg_pull_none>,
+				/* gmac0_rxd3 */
+				<2 RK_PA7 1 &pcfg_pull_none>,
+				/* gmac0_txd2 */
+				<2 RK_PB1 1 &pcfg_pull_none>,
+				/* gmac0_txd3 */
+				<2 RK_PB2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_ppsclk: gmac0-ppsclk {
+			rockchip,pins =
+				/* gmac0_ppsclk */
+				<2 RK_PC4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_ppstring: gmac0-ppstring {
+			rockchip,pins =
+				/* gmac0_ppstring */
+				<2 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_ptp_refclk: gmac0-ptp-refclk {
+			rockchip,pins =
+				/* gmac0_ptp_refclk */
+				<2 RK_PB4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_txer: gmac0-txer {
+			rockchip,pins =
+				/* gmac0_txer */
+				<4 RK_PC6 1 &pcfg_pull_none>;
+		};
+
+	};
+
+	hdmi {
+		/omit-if-no-ref/
+		hdmim0_tx1_cec: hdmim0-tx1-cec {
+			rockchip,pins =
+				/* hdmim0_tx1_cec */
+				<2 RK_PC4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx1_scl: hdmim0-tx1-scl {
+			rockchip,pins =
+				/* hdmim0_tx1_scl */
+				<2 RK_PB5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx1_sda: hdmim0-tx1-sda {
+			rockchip,pins =
+				/* hdmim0_tx1_sda */
+				<2 RK_PB4 4 &pcfg_pull_none>;
+		};
+	};
+
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0m1_xfer: i2c0m1-xfer {
+			rockchip,pins =
+				/* i2c0_scl_m1 */
+				<4 RK_PC5 9 &pcfg_pull_none_smt>,
+				/* i2c0_sda_m1 */
+				<4 RK_PC6 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2m1_xfer: i2c2m1-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m1 */
+				<2 RK_PC1 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m1 */
+				<2 RK_PC0 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m3_xfer: i2c3m3-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m3 */
+				<2 RK_PB2 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m3 */
+				<2 RK_PB3 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c4 {
+		/omit-if-no-ref/
+		i2c4m1_xfer: i2c4m1-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m1 */
+				<2 RK_PB5 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m1 */
+				<2 RK_PB4 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c5 {
+		/omit-if-no-ref/
+		i2c5m4_xfer: i2c5m4-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m4 */
+				<2 RK_PB6 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m4 */
+				<2 RK_PB7 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c6 {
+		/omit-if-no-ref/
+		i2c6m2_xfer: i2c6m2-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m2 */
+				<2 RK_PC3 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m2 */
+				<2 RK_PC2 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c7 {
+		/omit-if-no-ref/
+		i2c7m1_xfer: i2c7m1-xfer {
+			rockchip,pins =
+				/* i2c7_scl_m1 */
+				<4 RK_PC3 9 &pcfg_pull_none_smt>,
+				/* i2c7_sda_m1 */
+				<4 RK_PC4 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c8 {
+		/omit-if-no-ref/
+		i2c8m1_xfer: i2c8m1-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m1 */
+				<2 RK_PB0 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m1 */
+				<2 RK_PB1 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2s2 {
+		/omit-if-no-ref/
+		i2s2m0_lrck: i2s2m0-lrck {
+			rockchip,pins =
+				/* i2s2m0_lrck */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_mclk: i2s2m0-mclk {
+			rockchip,pins =
+				/* i2s2m0_mclk */
+				<2 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sclk: i2s2m0-sclk {
+			rockchip,pins =
+				/* i2s2m0_sclk */
+				<2 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdi: i2s2m0-sdi {
+			rockchip,pins =
+				/* i2s2m0_sdi */
+				<2 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdo: i2s2m0-sdo {
+			rockchip,pins =
+				/* i2s2m0_sdo */
+				<4 RK_PC3 2 &pcfg_pull_none>;
+		};
+	};
+
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m2_pins: pwm2m2-pins {
+			rockchip,pins =
+				/* pwm2_m2 */
+				<4 RK_PC2 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4m1_pins: pwm4m1-pins {
+			rockchip,pins =
+				/* pwm4_m1 */
+				<4 RK_PC3 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5m2_pins: pwm5m2-pins {
+			rockchip,pins =
+				/* pwm5_m2 */
+				<4 RK_PC4 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6m2_pins: pwm6m2-pins {
+			rockchip,pins =
+				/* pwm6_m2 */
+				<4 RK_PC5 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7m3_pins: pwm7m3-pins {
+			rockchip,pins =
+				/* pwm7_ir_m3 */
+				<4 RK_PC6 11 &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		/omit-if-no-ref/
+		sdiom0_pins: sdiom0-pins {
+			rockchip,pins =
+				/* sdio_clk_m0 */
+				<2 RK_PB3 2 &pcfg_pull_none>,
+				/* sdio_cmd_m0 */
+				<2 RK_PB2 2 &pcfg_pull_none>,
+				/* sdio_d0_m0 */
+				<2 RK_PA6 2 &pcfg_pull_none>,
+				/* sdio_d1_m0 */
+				<2 RK_PA7 2 &pcfg_pull_none>,
+				/* sdio_d2_m0 */
+				<2 RK_PB0 2 &pcfg_pull_none>,
+				/* sdio_d3_m0 */
+				<2 RK_PB1 2 &pcfg_pull_none>;
+		};
+	};
+
+	spi1 {
+		/omit-if-no-ref/
+		spi1m0_pins: spi1m0-pins {
+			rockchip,pins =
+				/* spi1_clk_m0 */
+				<2 RK_PC0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_miso_m0 */
+				<2 RK_PC1 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosi_m0 */
+				<2 RK_PC2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs0: spi1m0-cs0 {
+			rockchip,pins =
+				/* spi1_cs0_m0 */
+				<2 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs1: spi1m0-cs1 {
+			rockchip,pins =
+				/* spi1_cs1_m0 */
+				<2 RK_PC4 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi3 {
+		/omit-if-no-ref/
+		spi3m0_pins: spi3m0-pins {
+			rockchip,pins =
+				/* spi3_clk_m0 */
+				<4 RK_PC6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_miso_m0 */
+				<4 RK_PC4 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosi_m0 */
+				<4 RK_PC5 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs0: spi3m0-cs0 {
+			rockchip,pins =
+				/* spi3_cs0_m0 */
+				<4 RK_PC2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs1: spi3m0-cs1 {
+			rockchip,pins =
+				/* spi3_cs1_m0 */
+				<4 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rx_m0 */
+				<2 RK_PB6 10 &pcfg_pull_up>,
+				/* uart1_tx_m0 */
+				<2 RK_PB7 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_ctsn: uart1m0-ctsn {
+			rockchip,pins =
+				/* uart1m0_ctsn */
+				<2 RK_PC1 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_rtsn: uart1m0-rtsn {
+			rockchip,pins =
+				/* uart1m0_rtsn */
+				<2 RK_PC0 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart6 {
+		/omit-if-no-ref/
+		uart6m0_xfer: uart6m0-xfer {
+			rockchip,pins =
+				/* uart6_rx_m0 */
+				<2 RK_PA6 10 &pcfg_pull_up>,
+				/* uart6_tx_m0 */
+				<2 RK_PA7 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_ctsn: uart6m0-ctsn {
+			rockchip,pins =
+				/* uart6m0_ctsn */
+				<2 RK_PB1 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_rtsn: uart6m0-rtsn {
+			rockchip,pins =
+				/* uart6m0_rtsn */
+				<2 RK_PB0 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart7 {
+		/omit-if-no-ref/
+		uart7m0_xfer: uart7m0-xfer {
+			rockchip,pins =
+				/* uart7_rx_m0 */
+				<2 RK_PB4 10 &pcfg_pull_up>,
+				/* uart7_tx_m0 */
+				<2 RK_PB5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_ctsn: uart7m0-ctsn {
+			rockchip,pins =
+				/* uart7m0_ctsn */
+				<4 RK_PC6 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_rtsn: uart7m0-rtsn {
+			rockchip,pins =
+				/* uart7m0_rtsn */
+				<4 RK_PC2 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart9 {
+		/omit-if-no-ref/
+		uart9m0_xfer: uart9m0-xfer {
+			rockchip,pins =
+				/* uart9_rx_m0 */
+				<2 RK_PC4 10 &pcfg_pull_up>,
+				/* uart9_tx_m0 */
+				<2 RK_PC2 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_ctsn: uart9m0-ctsn {
+			rockchip,pins =
+				/* uart9m0_ctsn */
+				<4 RK_PC5 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_rtsn: uart9m0-rtsn {
+			rockchip,pins =
+				/* uart9m0_rtsn */
+				<4 RK_PC4 10 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
new file mode 100644
index 0000000000..8ab60968f2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Radxa ROCK 5 Model B";
+	compatible = "radxa,rock-5b", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 95 145 195 255>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	/* connected to USB hub, which is powered by vcc5v0_sys */
+	phy-supply = <&vcc5v0_sys>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
new file mode 100644
index 0000000000..5519c1430c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3588s.dtsi"
+#include "rk3588-pinctrl.dtsi"
+
+/ {
+	pcie30_phy_grf: syscon@fd5b8000 {
+		compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfd5b8000 0x0 0x10000>;
+	};
+
+	pipe_phy1_grf: syscon@fd5c0000 {
+		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfd5c0000 0x0 0x100>;
+	};
+
+	i2s8_8ch: i2s@fddc8000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddc8000 0x0 0x1000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 22>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_M_I2S8_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s6_8ch: i2s@fddf4000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddf4000 0x0 0x1000>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 4>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S6_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s7_8ch: i2s@fddf8000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddf8000 0x0 0x1000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 21>;
+		dma-names = "rx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S7_8CH_RX>;
+		reset-names = "rx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s10_8ch: i2s@fde00000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfde00000 0x0 0x1000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 24>;
+		dma-names = "rx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S10_8CH_RX>;
+		reset-names = "rx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	pcie3x4: pcie@fe150000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0x0f>;
+		clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+			 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+			 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
+				<0 0 0 2 &pcie3x4_intc 1>,
+				<0 0 0 3 &pcie3x4_intc 2>,
+				<0 0 0 4 &pcie3x4_intc 3>;
+		linux,pci-domain = <0>;
+		max-link-speed = <3>;
+		msi-map = <0x0000 &its1 0x0000 0x1000>;
+		num-lanes = <4>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
+		reg = <0xa 0x40000000 0x0 0x00400000>,
+		      <0x0 0xfe150000 0x0 0x00010000>,
+		      <0x0 0xf0000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+		reset-names = "pwr", "pipe";
+		status = "disabled";
+
+		pcie3x4_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	pcie3x2: pcie@fe160000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x10 0x1f>;
+		clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
+			 <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
+			 <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <1>;
+		max-link-speed = <3>;
+		msi-map = <0x1000 &its1 0x1000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
+		reg = <0xa 0x40400000 0x0 0x00400000>,
+		      <0x0 0xfe160000 0x0 0x00010000>,
+		      <0x0 0xf1000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
+		reset-names = "pwr", "pipe";
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	pcie2x1l0: pcie@fe170000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		bus-range = <0x20 0x2f>;
+		clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
+			 <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
+			 <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
+				<0 0 0 2 &pcie2x1l0_intc 1>,
+				<0 0 0 3 &pcie2x1l0_intc 2>,
+				<0 0 0 4 &pcie2x1l0_intc 3>;
+		linux,pci-domain = <2>;
+		max-link-speed = <2>;
+		msi-map = <0x2000 &its0 0x2000 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy1_ps PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
+		reg = <0xa 0x40800000 0x0 0x00400000>,
+		      <0x0 0xfe170000 0x0 0x00010000>,
+		      <0x0 0xf2000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
+		reset-names = "pwr", "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie2x1l0_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	gmac0: ethernet@fe1b0000 {
+		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
+		reg = <0x0 0xfe1b0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
+			 <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
+			 <&cru CLK_GMAC0_PTP_REF>;
+		clock-names = "stmmaceth", "clk_mac_ref",
+			      "pclk_mac", "aclk_mac",
+			      "ptp_ref";
+		power-domains = <&power RK3588_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC0>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&sys_grf>;
+		rockchip,php-grf = <&php_grf>;
+		snps,axi-config = <&gmac0_stmmac_axi_setup>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+		snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+		snps,tso;
+		status = "disabled";
+
+		mdio0: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		gmac0_stmmac_axi_setup: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,wr_osr_lmt = <4>;
+			snps,rd_osr_lmt = <8>;
+		};
+
+		gmac0_mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+
+		gmac0_mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+	};
+
+	sata1: sata@fe220000 {
+		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfe220000 0 0x1000>;
+		interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
+			 <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
+			 <&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
+		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+		ports-implemented = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		sata-port@0 {
+			reg = <0>;
+			hba-port-cap = <HBA_PORT_FBSCP>;
+			phys = <&combphy1_ps PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			snps,rx-ts-max = <32>;
+			snps,tx-ts-max = <32>;
+		};
+	};
+
+	combphy1_ps: phy@fee10000 {
+		compatible = "rockchip,rk3588-naneng-combphy";
+		reg = <0x0 0xfee10000 0x0 0x100>;
+		clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
+			 <&cru PCLK_PHP_ROOT>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
+		assigned-clock-rates = <100000000>;
+		#phy-cells = <1>;
+		resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
+		reset-names = "phy", "apb";
+		rockchip,pipe-grf = <&php_grf>;
+		rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
+		status = "disabled";
+	};
+
+	pcie30phy: phy@fee80000 {
+		compatible = "rockchip,rk3588-pcie3-phy";
+		reg = <0x0 0xfee80000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
+		clock-names = "pclk";
+		resets = <&cru SRST_PCIE30_PHY>;
+		reset-names = "phy";
+		rockchip,pipe-grf = <&php_grf>;
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
new file mode 100644
index 0000000000..38b9dbf38a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+#include "rk3588.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
new file mode 100644
index 0000000000..d1503a4b23
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -0,0 +1,761 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Indiedroid Nova";
+	compatible = "indiedroid,nova", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clock-names = "ext_clock";
+		clocks = <&rtc_hym8563>;
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "rockchip,es8388-codec";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+		routing = "LINPUT2", "Mic Jack",
+			  "Headphones", "LOUT1",
+			  "Headphones", "ROUT1";
+		dais = <&i2s0_8ch_p0>;
+	};
+
+	vbus5v0_typec: vbus5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&typec5v_pwren>;
+		pinctrl-names = "default";
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1100000>;
+		regulator-min-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Regulator is enabled whenever vcc_1v8_s0 is above 1.6v */
+	vcc_3v3_s0: vcc-3v3-s0-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_s0";
+		vin-supply = <&vcc_3v3_s3>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vcc5v0_sys";
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usb";
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usbdcin";
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+/*
+ * Add labels for each GPIO pin exposed on the 40 pin header. Note that
+ * voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by
+ * label).
+ */
+&gpio0 {
+	gpio-line-names = /* GPIO0 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 D0-D7 */
+			  "HEADER_12_1v8", "", "", "HEADER_24_1v8",
+			  "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A0-A7 */
+			  "HEADER_27_3v3", "HEADER_28_3v3", "", "",
+			  "HEADER_29_1v8", "", "HEADER_7_1v8", "",
+			  /* GPIO1 B0-B7 */
+			  "", "HEADER_31_1v8", "HEADER_33_1v8", "",
+			  "HEADER_11_1v8", "HEADER_13_1v8", "", "",
+			  /* GPIO1 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO1 D0-D7 */
+			  "", "", "", "",
+			  "", "", "HEADER_5_3v3", "HEADER_3_3v3";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 B0-B7 */
+			  "HEADER_16_1v8", "HEADER_18_1v8", "", "",
+			  "", "", "", "HEADER_19_1v8",
+			  /* GPIO3 C0-C7 */
+			  "HEADER_21_1v8", "HEADER_23_1v8", "", "HEADER_26_1v8",
+			  "HEADER_15_1v8", "HEADER_22_1v8", "", "",
+			  /* GPIO3 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = /* GPIO4 A0-A7 */
+			  "", "", "HEADER_37_3v3", "HEADER_32_3v3",
+			  "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
+			  /* GPIO4 B0-B7 */
+			  "", "", "", "HEADER_40_3v3",
+			  "HEADER_8_3v3", "HEADER_10_3v3", "", "",
+			  /* GPIO4 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO4 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1050000>;
+		regulator-min-microvolt = <550000>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-ramp-delay = <2300>;
+		fcs,suspend-voltage-selector = <1>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1050000>;
+		regulator-min-microvolt = <550000>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-ramp-delay = <2300>;
+		fcs,suspend-voltage-selector = <1>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <950000>;
+		regulator-min-microvolt = <550000>;
+		regulator-name = "vdd_npu_s0";
+		regulator-ramp-delay = <2300>;
+		fcs,suspend-voltage-selector = <1>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&usbc0_int>;
+		pinctrl-names = "default";
+		vbus-supply = <&vbus5v0_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <1000000>;
+		};
+	};
+
+	rtc_hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&hym8563_int>;
+		pinctrl-names = "default";
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		assigned-clock-rates = <12288000>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		AVDD-supply = <&vcc_3v3_s3>;
+		clock-names = "mclk";
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		DVDD-supply = <&vcc_1v8_s3>;
+		HPVDD-supply = <&vcc_3v3_s3>;
+		PVDD-supply = <&vcc_1v8_s3>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8388_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8388_p0_0>;
+		};
+	};
+};
+
+&pinctrl {
+	bluetooth-pins {
+		bt_reset: bt-reset {
+			rockchip,pins =
+				<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins =
+				<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins =
+				<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	hym8563 {
+
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		usbc0_int: usbc0-int {
+			rockchip,pins =
+				<0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins =
+				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+/* HS400 modes seemed to cause io errors. */
+&sdhci {
+	bus-width = <8>;
+	no-mmc-hs400;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3_s0>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
+	non-removable;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	#address-cells = <1>;
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>;
+	pinctrl-names = "default";
+	#size-cells = <0>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <550000>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <550000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <750000>;
+				regulator-min-microvolt = <675000>;
+				regulator-name = "vdd_logic_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <550000>;
+				regulator-name = "vdd_vdenc_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <850000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2000000>;
+				regulator-min-microvolt = <2000000>;
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <600000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3_pldo6: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3_pldo6";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <750000>;
+				regulator-min-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <750000>;
+				regulator-min-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* Schematics show not in use */
+			nldo-reg5 {
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* DMA seems to interfere with bluetooth device normal operation. */
+&uart9 {
+	pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>;
+	pinctrl-names = "default";
+	/delete-property/ dma-names;
+	/delete-property/ dmas;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt",
+			     "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
+		pinctrl-names = "default";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
new file mode 100644
index 0000000000..82478a4525
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Khadas Edge2";
+	compatible = "khadas,edge2", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
new file mode 100644
index 0000000000..0933652baf
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
@@ -0,0 +1,3403 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	auddsm {
+		/omit-if-no-ref/
+		auddsm_pins: auddsm-pins {
+			rockchip,pins =
+				/* auddsm_ln */
+				<3 RK_PA1 4 &pcfg_pull_none>,
+				/* auddsm_lp */
+				<3 RK_PA2 4 &pcfg_pull_none>,
+				/* auddsm_rn */
+				<3 RK_PA3 4 &pcfg_pull_none>,
+				/* auddsm_rp */
+				<3 RK_PA4 4 &pcfg_pull_none>;
+		};
+	};
+
+	bt1120 {
+		/omit-if-no-ref/
+		bt1120_pins: bt1120-pins {
+			rockchip,pins =
+				/* bt1120_clkout */
+				<4 RK_PB0 2 &pcfg_pull_none>,
+				/* bt1120_d0 */
+				<4 RK_PA0 2 &pcfg_pull_none>,
+				/* bt1120_d1 */
+				<4 RK_PA1 2 &pcfg_pull_none>,
+				/* bt1120_d2 */
+				<4 RK_PA2 2 &pcfg_pull_none>,
+				/* bt1120_d3 */
+				<4 RK_PA3 2 &pcfg_pull_none>,
+				/* bt1120_d4 */
+				<4 RK_PA4 2 &pcfg_pull_none>,
+				/* bt1120_d5 */
+				<4 RK_PA5 2 &pcfg_pull_none>,
+				/* bt1120_d6 */
+				<4 RK_PA6 2 &pcfg_pull_none>,
+				/* bt1120_d7 */
+				<4 RK_PA7 2 &pcfg_pull_none>,
+				/* bt1120_d8 */
+				<4 RK_PB2 2 &pcfg_pull_none>,
+				/* bt1120_d9 */
+				<4 RK_PB3 2 &pcfg_pull_none>,
+				/* bt1120_d10 */
+				<4 RK_PB4 2 &pcfg_pull_none>,
+				/* bt1120_d11 */
+				<4 RK_PB5 2 &pcfg_pull_none>,
+				/* bt1120_d12 */
+				<4 RK_PB6 2 &pcfg_pull_none>,
+				/* bt1120_d13 */
+				<4 RK_PB7 2 &pcfg_pull_none>,
+				/* bt1120_d14 */
+				<4 RK_PC0 2 &pcfg_pull_none>,
+				/* bt1120_d15 */
+				<4 RK_PC1 2 &pcfg_pull_none>;
+		};
+	};
+
+	can0 {
+		/omit-if-no-ref/
+		can0m0_pins: can0m0-pins {
+			rockchip,pins =
+				/* can0_rx_m0 */
+				<0 RK_PC0 11 &pcfg_pull_none>,
+				/* can0_tx_m0 */
+				<0 RK_PB7 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can0m1_pins: can0m1-pins {
+			rockchip,pins =
+				/* can0_rx_m1 */
+				<4 RK_PD5 9 &pcfg_pull_none>,
+				/* can0_tx_m1 */
+				<4 RK_PD4 9 &pcfg_pull_none>;
+		};
+	};
+
+	can1 {
+		/omit-if-no-ref/
+		can1m0_pins: can1m0-pins {
+			rockchip,pins =
+				/* can1_rx_m0 */
+				<3 RK_PB5 9 &pcfg_pull_none>,
+				/* can1_tx_m0 */
+				<3 RK_PB6 9 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can1m1_pins: can1m1-pins {
+			rockchip,pins =
+				/* can1_rx_m1 */
+				<4 RK_PB2 12 &pcfg_pull_none>,
+				/* can1_tx_m1 */
+				<4 RK_PB3 12 &pcfg_pull_none>;
+		};
+	};
+
+	can2 {
+		/omit-if-no-ref/
+		can2m0_pins: can2m0-pins {
+			rockchip,pins =
+				/* can2_rx_m0 */
+				<3 RK_PC4 9 &pcfg_pull_none>,
+				/* can2_tx_m0 */
+				<3 RK_PC5 9 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can2m1_pins: can2m1-pins {
+			rockchip,pins =
+				/* can2_rx_m1 */
+				<0 RK_PD4 10 &pcfg_pull_none>,
+				/* can2_tx_m1 */
+				<0 RK_PD5 10 &pcfg_pull_none>;
+		};
+	};
+
+	cif {
+		/omit-if-no-ref/
+		cif_clk: cif-clk {
+			rockchip,pins =
+				/* cif_clkout */
+				<4 RK_PB4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_clk: cif-dvp-clk {
+			rockchip,pins =
+				/* cif_clkin */
+				<4 RK_PB0 1 &pcfg_pull_none>,
+				/* cif_href */
+				<4 RK_PB2 1 &pcfg_pull_none>,
+				/* cif_vsync */
+				<4 RK_PB3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_bus16: cif-dvp-bus16 {
+			rockchip,pins =
+				/* cif_d8 */
+				<3 RK_PC4 1 &pcfg_pull_none>,
+				/* cif_d9 */
+				<3 RK_PC5 1 &pcfg_pull_none>,
+				/* cif_d10 */
+				<3 RK_PC6 1 &pcfg_pull_none>,
+				/* cif_d11 */
+				<3 RK_PC7 1 &pcfg_pull_none>,
+				/* cif_d12 */
+				<3 RK_PD0 1 &pcfg_pull_none>,
+				/* cif_d13 */
+				<3 RK_PD1 1 &pcfg_pull_none>,
+				/* cif_d14 */
+				<3 RK_PD2 1 &pcfg_pull_none>,
+				/* cif_d15 */
+				<3 RK_PD3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_bus8: cif-dvp-bus8 {
+			rockchip,pins =
+				/* cif_d0 */
+				<4 RK_PA0 1 &pcfg_pull_none>,
+				/* cif_d1 */
+				<4 RK_PA1 1 &pcfg_pull_none>,
+				/* cif_d2 */
+				<4 RK_PA2 1 &pcfg_pull_none>,
+				/* cif_d3 */
+				<4 RK_PA3 1 &pcfg_pull_none>,
+				/* cif_d4 */
+				<4 RK_PA4 1 &pcfg_pull_none>,
+				/* cif_d5 */
+				<4 RK_PA5 1 &pcfg_pull_none>,
+				/* cif_d6 */
+				<4 RK_PA6 1 &pcfg_pull_none>,
+				/* cif_d7 */
+				<4 RK_PA7 1 &pcfg_pull_none>;
+		};
+	};
+
+	clk32k {
+		/omit-if-no-ref/
+		clk32k_in: clk32k-in {
+			rockchip,pins =
+				/* clk32k_in */
+				<0 RK_PB2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		clk32k_out0: clk32k-out0 {
+			rockchip,pins =
+				/* clk32k_out0 */
+				<0 RK_PB2 2 &pcfg_pull_none>;
+		};
+	};
+
+	cpu {
+		/omit-if-no-ref/
+		cpu_pins: cpu-pins {
+			rockchip,pins =
+				/* cpu_big0_avs */
+				<0 RK_PD1 2 &pcfg_pull_none>,
+				/* cpu_big1_avs */
+				<0 RK_PD5 2 &pcfg_pull_none>;
+		};
+	};
+
+	ddrphych0 {
+		/omit-if-no-ref/
+		ddrphych0_pins: ddrphych0-pins {
+			rockchip,pins =
+				/* ddrphych0_dtb0 */
+				<4 RK_PA0 7 &pcfg_pull_none>,
+				/* ddrphych0_dtb1 */
+				<4 RK_PA1 7 &pcfg_pull_none>,
+				/* ddrphych0_dtb2 */
+				<4 RK_PA2 7 &pcfg_pull_none>,
+				/* ddrphych0_dtb3 */
+				<4 RK_PA3 7 &pcfg_pull_none>;
+		};
+	};
+
+	ddrphych1 {
+		/omit-if-no-ref/
+		ddrphych1_pins: ddrphych1-pins {
+			rockchip,pins =
+				/* ddrphych1_dtb0 */
+				<4 RK_PA4 7 &pcfg_pull_none>,
+				/* ddrphych1_dtb1 */
+				<4 RK_PA5 7 &pcfg_pull_none>,
+				/* ddrphych1_dtb2 */
+				<4 RK_PA6 7 &pcfg_pull_none>,
+				/* ddrphych1_dtb3 */
+				<4 RK_PA7 7 &pcfg_pull_none>;
+		};
+	};
+
+	ddrphych2 {
+		/omit-if-no-ref/
+		ddrphych2_pins: ddrphych2-pins {
+			rockchip,pins =
+				/* ddrphych2_dtb0 */
+				<4 RK_PB0 7 &pcfg_pull_none>,
+				/* ddrphych2_dtb1 */
+				<4 RK_PB1 7 &pcfg_pull_none>,
+				/* ddrphych2_dtb2 */
+				<4 RK_PB2 7 &pcfg_pull_none>,
+				/* ddrphych2_dtb3 */
+				<4 RK_PB3 7 &pcfg_pull_none>;
+		};
+	};
+
+	ddrphych3 {
+		/omit-if-no-ref/
+		ddrphych3_pins: ddrphych3-pins {
+			rockchip,pins =
+				/* ddrphych3_dtb0 */
+				<4 RK_PB4 7 &pcfg_pull_none>,
+				/* ddrphych3_dtb1 */
+				<4 RK_PB5 7 &pcfg_pull_none>,
+				/* ddrphych3_dtb2 */
+				<4 RK_PB6 7 &pcfg_pull_none>,
+				/* ddrphych3_dtb3 */
+				<4 RK_PB7 7 &pcfg_pull_none>;
+		};
+	};
+
+	dp0 {
+		/omit-if-no-ref/
+		dp0m0_pins: dp0m0-pins {
+			rockchip,pins =
+				/* dp0_hpdin_m0 */
+				<4 RK_PB4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		dp0m1_pins: dp0m1-pins {
+			rockchip,pins =
+				/* dp0_hpdin_m1 */
+				<0 RK_PC4 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		dp0m2_pins: dp0m2-pins {
+			rockchip,pins =
+				/* dp0_hpdin_m2 */
+				<1 RK_PA0 5 &pcfg_pull_none>;
+		};
+	};
+
+	dp1 {
+		/omit-if-no-ref/
+		dp1m0_pins: dp1m0-pins {
+			rockchip,pins =
+				/* dp1_hpdin_m0 */
+				<3 RK_PD5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		dp1m1_pins: dp1m1-pins {
+			rockchip,pins =
+				/* dp1_hpdin_m1 */
+				<0 RK_PC5 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		dp1m2_pins: dp1m2-pins {
+			rockchip,pins =
+				/* dp1_hpdin_m2 */
+				<1 RK_PA1 5 &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		/omit-if-no-ref/
+		emmc_rstnout: emmc-rstnout {
+			rockchip,pins =
+				/* emmc_rstn */
+				<2 RK_PA3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<2 RK_PD0 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<2 RK_PD1 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<2 RK_PD2 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clkout */
+				<2 RK_PA1 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<2 RK_PA0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_data_strobe: emmc-data-strobe {
+			rockchip,pins =
+				/* emmc_data_strobe */
+				<2 RK_PA2 1 &pcfg_pull_down>;
+		};
+	};
+
+	eth1 {
+		/omit-if-no-ref/
+		eth1_pins: eth1-pins {
+			rockchip,pins =
+				/* eth1_refclko_25m */
+				<3 RK_PA6 1 &pcfg_pull_none>;
+		};
+	};
+
+	fspi {
+		/omit-if-no-ref/
+		fspim0_pins: fspim0-pins {
+			rockchip,pins =
+				/* fspi_clk_m0 */
+				<2 RK_PA0 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_cs0n_m0 */
+				<2 RK_PD6 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d0_m0 */
+				<2 RK_PD0 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d1_m0 */
+				<2 RK_PD1 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d2_m0 */
+				<2 RK_PD2 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d3_m0 */
+				<2 RK_PD3 2 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		fspim0_cs1: fspim0-cs1 {
+			rockchip,pins =
+				/* fspi_cs1n_m0 */
+				<2 RK_PD7 2 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		fspim2_pins: fspim2-pins {
+			rockchip,pins =
+				/* fspi_clk_m2 */
+				<3 RK_PA5 5 &pcfg_pull_up_drv_level_2>,
+				/* fspi_cs0n_m2 */
+				<3 RK_PC4 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d0_m2 */
+				<3 RK_PA0 5 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d1_m2 */
+				<3 RK_PA1 5 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d2_m2 */
+				<3 RK_PA2 5 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d3_m2 */
+				<3 RK_PA3 5 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		fspim2_cs1: fspim2-cs1 {
+			rockchip,pins =
+				/* fspi_cs1n_m2 */
+				<3 RK_PC5 2 &pcfg_pull_up_drv_level_2>;
+		};
+	};
+
+	gmac1 {
+		/omit-if-no-ref/
+		gmac1_miim: gmac1-miim {
+			rockchip,pins =
+				/* gmac1_mdc */
+				<3 RK_PC2 1 &pcfg_pull_none>,
+				/* gmac1_mdio */
+				<3 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_clkinout: gmac1-clkinout {
+			rockchip,pins =
+				/* gmac1_mclkinout */
+				<3 RK_PB6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_rx_bus2: gmac1-rx-bus2 {
+			rockchip,pins =
+				/* gmac1_rxd0 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* gmac1_rxd1 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* gmac1_rxdv_crs */
+				<3 RK_PB1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_tx_bus2: gmac1-tx-bus2 {
+			rockchip,pins =
+				/* gmac1_txd0 */
+				<3 RK_PB3 1 &pcfg_pull_none>,
+				/* gmac1_txd1 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* gmac1_txen */
+				<3 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_rgmii_clk: gmac1-rgmii-clk {
+			rockchip,pins =
+				/* gmac1_rxclk */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* gmac1_txclk */
+				<3 RK_PA4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_rgmii_bus: gmac1-rgmii-bus {
+			rockchip,pins =
+				/* gmac1_rxd2 */
+				<3 RK_PA2 1 &pcfg_pull_none>,
+				/* gmac1_rxd3 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* gmac1_txd2 */
+				<3 RK_PA0 1 &pcfg_pull_none>,
+				/* gmac1_txd3 */
+				<3 RK_PA1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_ppsclk: gmac1-ppsclk {
+			rockchip,pins =
+				/* gmac1_ppsclk */
+				<3 RK_PC1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_ppstrig: gmac1-ppstrig {
+			rockchip,pins =
+				/* gmac1_ppstrig */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_ptp_ref_clk: gmac1-ptp-ref-clk {
+			rockchip,pins =
+				/* gmac1_ptp_ref_clk */
+				<3 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_txer: gmac1-txer {
+			rockchip,pins =
+				/* gmac1_txer */
+				<3 RK_PB2 1 &pcfg_pull_none>;
+		};
+	};
+
+	gpu {
+		/omit-if-no-ref/
+		gpu_pins: gpu-pins {
+			rockchip,pins =
+				/* gpu_avs */
+				<0 RK_PC5 2 &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		/omit-if-no-ref/
+		hdmim0_rx_cec: hdmim0-rx-cec {
+			rockchip,pins =
+				/* hdmim0_rx_cec */
+				<4 RK_PB5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_rx_hpdin: hdmim0-rx-hpdin {
+			rockchip,pins =
+				/* hdmim0_rx_hpdin */
+				<4 RK_PB6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_rx_scl: hdmim0-rx-scl {
+			rockchip,pins =
+				/* hdmim0_rx_scl */
+				<0 RK_PD2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_rx_sda: hdmim0-rx-sda {
+			rockchip,pins =
+				/* hdmim0_rx_sda */
+				<0 RK_PD1 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx0_cec: hdmim0-tx0-cec {
+			rockchip,pins =
+				/* hdmim0_tx0_cec */
+				<4 RK_PC1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx0_hpd: hdmim0-tx0-hpd {
+			rockchip,pins =
+				/* hdmim0_tx0_hpd */
+				<1 RK_PA5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx0_scl: hdmim0-tx0-scl {
+			rockchip,pins =
+				/* hdmim0_tx0_scl */
+				<4 RK_PB7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx0_sda: hdmim0-tx0-sda {
+			rockchip,pins =
+				/* hdmim0_tx0_sda */
+				<4 RK_PC0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx1_hpd: hdmim0-tx1-hpd {
+			rockchip,pins =
+				/* hdmim0_tx1_hpd */
+				<1 RK_PA6 5 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		hdmim1_rx_cec: hdmim1-rx-cec {
+			rockchip,pins =
+				/* hdmim1_rx_cec */
+				<3 RK_PD1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_rx_hpdin: hdmim1-rx-hpdin {
+			rockchip,pins =
+				/* hdmim1_rx_hpdin */
+				<3 RK_PD4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_rx_scl: hdmim1-rx-scl {
+			rockchip,pins =
+				/* hdmim1_rx_scl */
+				<3 RK_PD2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_rx_sda: hdmim1-rx-sda {
+			rockchip,pins =
+				/* hdmim1_rx_sda */
+				<3 RK_PD3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx0_cec: hdmim1-tx0-cec {
+			rockchip,pins =
+				/* hdmim1_tx0_cec */
+				<0 RK_PD1 13 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx0_hpd: hdmim1-tx0-hpd {
+			rockchip,pins =
+				/* hdmim1_tx0_hpd */
+				<3 RK_PD4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx0_scl: hdmim1-tx0-scl {
+			rockchip,pins =
+				/* hdmim1_tx0_scl */
+				<0 RK_PD5 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx0_sda: hdmim1-tx0-sda {
+			rockchip,pins =
+				/* hdmim1_tx0_sda */
+				<0 RK_PD4 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx1_cec: hdmim1-tx1-cec {
+			rockchip,pins =
+				/* hdmim1_tx1_cec */
+				<0 RK_PD2 13 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx1_hpd: hdmim1-tx1-hpd {
+			rockchip,pins =
+				/* hdmim1_tx1_hpd */
+				<3 RK_PB7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx1_scl: hdmim1-tx1-scl {
+			rockchip,pins =
+				/* hdmim1_tx1_scl */
+				<3 RK_PC6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx1_sda: hdmim1-tx1-sda {
+			rockchip,pins =
+				/* hdmim1_tx1_sda */
+				<3 RK_PC5 5 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		hdmim2_rx_cec: hdmim2-rx-cec {
+			rockchip,pins =
+				/* hdmim2_rx_cec */
+				<1 RK_PB7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_rx_hpdin: hdmim2-rx-hpdin {
+			rockchip,pins =
+				/* hdmim2_rx_hpdin */
+				<1 RK_PB6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_rx_scl: hdmim2-rx-scl {
+			rockchip,pins =
+				/* hdmim2_rx_scl */
+				<1 RK_PD6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_rx_sda: hdmim2-rx-sda {
+			rockchip,pins =
+				/* hdmim2_rx_sda */
+				<1 RK_PD7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx0_scl: hdmim2-tx0-scl {
+			rockchip,pins =
+				/* hdmim2_tx0_scl */
+				<3 RK_PC7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx0_sda: hdmim2-tx0-sda {
+			rockchip,pins =
+				/* hdmim2_tx0_sda */
+				<3 RK_PD0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx1_cec: hdmim2-tx1-cec {
+			rockchip,pins =
+				/* hdmim2_tx1_cec */
+				<3 RK_PC4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx1_scl: hdmim2-tx1-scl {
+			rockchip,pins =
+				/* hdmim2_tx1_scl */
+				<1 RK_PA4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx1_sda: hdmim2-tx1-sda {
+			rockchip,pins =
+				/* hdmim2_tx1_sda */
+				<1 RK_PA3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug0: hdmi-debug0 {
+			rockchip,pins =
+				/* hdmi_debug0 */
+				<1 RK_PA7 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug1: hdmi-debug1 {
+			rockchip,pins =
+				/* hdmi_debug1 */
+				<1 RK_PB0 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug2: hdmi-debug2 {
+			rockchip,pins =
+				/* hdmi_debug2 */
+				<1 RK_PB1 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug3: hdmi-debug3 {
+			rockchip,pins =
+				/* hdmi_debug3 */
+				<1 RK_PB2 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug4: hdmi-debug4 {
+			rockchip,pins =
+				/* hdmi_debug4 */
+				<1 RK_PB3 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug5: hdmi-debug5 {
+			rockchip,pins =
+				/* hdmi_debug5 */
+				<1 RK_PB4 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug6: hdmi-debug6 {
+			rockchip,pins =
+				/* hdmi_debug6 */
+				<1 RK_PA0 7 &pcfg_pull_none>;
+		};
+	};
+
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0m0_xfer: i2c0m0-xfer {
+			rockchip,pins =
+				/* i2c0_scl_m0 */
+				<0 RK_PB3 2 &pcfg_pull_none_smt>,
+				/* i2c0_sda_m0 */
+				<0 RK_PA6 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c0m2_xfer: i2c0m2-xfer {
+			rockchip,pins =
+				/* i2c0_scl_m2 */
+				<0 RK_PD1 3 &pcfg_pull_none_smt>,
+				/* i2c0_sda_m2 */
+				<0 RK_PD2 3 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c1 {
+		/omit-if-no-ref/
+		i2c1m0_xfer: i2c1m0-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m0 */
+				<0 RK_PB5 9 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m0 */
+				<0 RK_PB6 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m1_xfer: i2c1m1-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m1 */
+				<0 RK_PB0 2 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m1 */
+				<0 RK_PB1 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m2_xfer: i2c1m2-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m2 */
+				<0 RK_PD4 9 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m2 */
+				<0 RK_PD5 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m3_xfer: i2c1m3-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m3 */
+				<2 RK_PD4 9 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m3 */
+				<2 RK_PD5 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m4_xfer: i2c1m4-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m4 */
+				<1 RK_PD2 9 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m4 */
+				<1 RK_PD3 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2m0_xfer: i2c2m0-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m0 */
+				<0 RK_PB7 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m0 */
+				<0 RK_PC0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m2_xfer: i2c2m2-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m2 */
+				<2 RK_PA3 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m2 */
+				<2 RK_PA2 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m3_xfer: i2c2m3-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m3 */
+				<1 RK_PC5 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m3 */
+				<1 RK_PC4 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m4_xfer: i2c2m4-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m4 */
+				<1 RK_PA1 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m4 */
+				<1 RK_PA0 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m0_xfer: i2c3m0-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m0 */
+				<1 RK_PC1 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m0 */
+				<1 RK_PC0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m1_xfer: i2c3m1-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m1 */
+				<3 RK_PB7 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m1 */
+				<3 RK_PC0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m2_xfer: i2c3m2-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m2 */
+				<4 RK_PA4 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m2 */
+				<4 RK_PA5 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m4_xfer: i2c3m4-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m4 */
+				<4 RK_PD0 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m4 */
+				<4 RK_PD1 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c4 {
+		/omit-if-no-ref/
+		i2c4m0_xfer: i2c4m0-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m0 */
+				<3 RK_PA6 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m0 */
+				<3 RK_PA5 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m2_xfer: i2c4m2-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m2 */
+				<0 RK_PC5 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m2 */
+				<0 RK_PC4 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m3_xfer: i2c4m3-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m3 */
+				<1 RK_PA3 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m3 */
+				<1 RK_PA2 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m4_xfer: i2c4m4-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m4 */
+				<1 RK_PC7 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m4 */
+				<1 RK_PC6 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c5 {
+		/omit-if-no-ref/
+		i2c5m0_xfer: i2c5m0-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m0 */
+				<3 RK_PC7 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m0 */
+				<3 RK_PD0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m1_xfer: i2c5m1-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m1 */
+				<4 RK_PB6 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m1 */
+				<4 RK_PB7 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m2_xfer: i2c5m2-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m2 */
+				<4 RK_PA6 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m2 */
+				<4 RK_PA7 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m3_xfer: i2c5m3-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m3 */
+				<1 RK_PB6 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m3 */
+				<1 RK_PB7 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c6 {
+		/omit-if-no-ref/
+		i2c6m0_xfer: i2c6m0-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m0 */
+				<0 RK_PD0 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m0 */
+				<0 RK_PC7 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c6m1_xfer: i2c6m1-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m1 */
+				<1 RK_PC3 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m1 */
+				<1 RK_PC2 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c6m3_xfer: i2c6m3-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m3 */
+				<4 RK_PB1 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m3 */
+				<4 RK_PB0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c6m4_xfer: i2c6m4-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m4 */
+				<3 RK_PA1 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m4 */
+				<3 RK_PA0 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c7 {
+		/omit-if-no-ref/
+		i2c7m0_xfer: i2c7m0-xfer {
+			rockchip,pins =
+				/* i2c7_scl_m0 */
+				<1 RK_PD0 9 &pcfg_pull_none_smt>,
+				/* i2c7_sda_m0 */
+				<1 RK_PD1 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c7m2_xfer: i2c7m2-xfer {
+			rockchip,pins =
+				/* i2c7_scl_m2 */
+				<3 RK_PD2 9 &pcfg_pull_none_smt>,
+				/* i2c7_sda_m2 */
+				<3 RK_PD3 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c7m3_xfer: i2c7m3-xfer {
+			rockchip,pins =
+				/* i2c7_scl_m3 */
+				<4 RK_PB2 9 &pcfg_pull_none_smt>,
+				/* i2c7_sda_m3 */
+				<4 RK_PB3 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c8 {
+		/omit-if-no-ref/
+		i2c8m0_xfer: i2c8m0-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m0 */
+				<4 RK_PD2 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m0 */
+				<4 RK_PD3 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c8m2_xfer: i2c8m2-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m2 */
+				<1 RK_PD6 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m2 */
+				<1 RK_PD7 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c8m3_xfer: i2c8m3-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m3 */
+				<4 RK_PC0 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m3 */
+				<4 RK_PC1 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c8m4_xfer: i2c8m4-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m4 */
+				<3 RK_PC2 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m4 */
+				<3 RK_PC3 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2s0 {
+		/omit-if-no-ref/
+		i2s0_lrck: i2s0-lrck {
+			rockchip,pins =
+				/* i2s0_lrck */
+				<1 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_mclk: i2s0-mclk {
+			rockchip,pins =
+				/* i2s0_mclk */
+				<1 RK_PC2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sclk: i2s0-sclk {
+			rockchip,pins =
+				/* i2s0_sclk */
+				<1 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdi0: i2s0-sdi0 {
+			rockchip,pins =
+				/* i2s0_sdi0 */
+				<1 RK_PD4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdi1: i2s0-sdi1 {
+			rockchip,pins =
+				/* i2s0_sdi1 */
+				<1 RK_PD3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdi2: i2s0-sdi2 {
+			rockchip,pins =
+				/* i2s0_sdi2 */
+				<1 RK_PD2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdi3: i2s0-sdi3 {
+			rockchip,pins =
+				/* i2s0_sdi3 */
+				<1 RK_PD1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdo0: i2s0-sdo0 {
+			rockchip,pins =
+				/* i2s0_sdo0 */
+				<1 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdo1: i2s0-sdo1 {
+			rockchip,pins =
+				/* i2s0_sdo1 */
+				<1 RK_PD0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdo2: i2s0-sdo2 {
+			rockchip,pins =
+				/* i2s0_sdo2 */
+				<1 RK_PD1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdo3: i2s0-sdo3 {
+			rockchip,pins =
+				/* i2s0_sdo3 */
+				<1 RK_PD2 1 &pcfg_pull_none>;
+		};
+	};
+
+	i2s1 {
+		/omit-if-no-ref/
+		i2s1m0_lrck: i2s1m0-lrck {
+			rockchip,pins =
+				/* i2s1m0_lrck */
+				<4 RK_PA2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_mclk: i2s1m0-mclk {
+			rockchip,pins =
+				/* i2s1m0_mclk */
+				<4 RK_PA0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sclk: i2s1m0-sclk {
+			rockchip,pins =
+				/* i2s1m0_sclk */
+				<4 RK_PA1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi0: i2s1m0-sdi0 {
+			rockchip,pins =
+				/* i2s1m0_sdi0 */
+				<4 RK_PA5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi1: i2s1m0-sdi1 {
+			rockchip,pins =
+				/* i2s1m0_sdi1 */
+				<4 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi2: i2s1m0-sdi2 {
+			rockchip,pins =
+				/* i2s1m0_sdi2 */
+				<4 RK_PA7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi3: i2s1m0-sdi3 {
+			rockchip,pins =
+				/* i2s1m0_sdi3 */
+				<4 RK_PB0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo0: i2s1m0-sdo0 {
+			rockchip,pins =
+				/* i2s1m0_sdo0 */
+				<4 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo1: i2s1m0-sdo1 {
+			rockchip,pins =
+				/* i2s1m0_sdo1 */
+				<4 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo2: i2s1m0-sdo2 {
+			rockchip,pins =
+				/* i2s1m0_sdo2 */
+				<4 RK_PB3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo3: i2s1m0-sdo3 {
+			rockchip,pins =
+				/* i2s1m0_sdo3 */
+				<4 RK_PB4 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		i2s1m1_lrck: i2s1m1-lrck {
+			rockchip,pins =
+				/* i2s1m1_lrck */
+				<0 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_mclk: i2s1m1-mclk {
+			rockchip,pins =
+				/* i2s1m1_mclk */
+				<0 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sclk: i2s1m1-sclk {
+			rockchip,pins =
+				/* i2s1m1_sclk */
+				<0 RK_PB6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi0: i2s1m1-sdi0 {
+			rockchip,pins =
+				/* i2s1m1_sdi0 */
+				<0 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi1: i2s1m1-sdi1 {
+			rockchip,pins =
+				/* i2s1m1_sdi1 */
+				<0 RK_PC6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi2: i2s1m1-sdi2 {
+			rockchip,pins =
+				/* i2s1m1_sdi2 */
+				<0 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi3: i2s1m1-sdi3 {
+			rockchip,pins =
+				/* i2s1m1_sdi3 */
+				<0 RK_PD0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo0: i2s1m1-sdo0 {
+			rockchip,pins =
+				/* i2s1m1_sdo0 */
+				<0 RK_PD1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo1: i2s1m1-sdo1 {
+			rockchip,pins =
+				/* i2s1m1_sdo1 */
+				<0 RK_PD2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo2: i2s1m1-sdo2 {
+			rockchip,pins =
+				/* i2s1m1_sdo2 */
+				<0 RK_PD4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo3: i2s1m1-sdo3 {
+			rockchip,pins =
+				/* i2s1m1_sdo3 */
+				<0 RK_PD5 1 &pcfg_pull_none>;
+		};
+	};
+
+	i2s2 {
+		/omit-if-no-ref/
+		i2s2m1_lrck: i2s2m1-lrck {
+			rockchip,pins =
+				/* i2s2m1_lrck */
+				<3 RK_PB6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_mclk: i2s2m1-mclk {
+			rockchip,pins =
+				/* i2s2m1_mclk */
+				<3 RK_PB4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sclk: i2s2m1-sclk {
+			rockchip,pins =
+				/* i2s2m1_sclk */
+				<3 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdi: i2s2m1-sdi {
+			rockchip,pins =
+				/* i2s2m1_sdi */
+				<3 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdo: i2s2m1-sdo {
+			rockchip,pins =
+				/* i2s2m1_sdo */
+				<3 RK_PB3 3 &pcfg_pull_none>;
+		};
+	};
+
+	i2s3 {
+		/omit-if-no-ref/
+		i2s3_lrck: i2s3-lrck {
+			rockchip,pins =
+				/* i2s3_lrck */
+				<3 RK_PA2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3_mclk: i2s3-mclk {
+			rockchip,pins =
+				/* i2s3_mclk */
+				<3 RK_PA0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3_sclk: i2s3-sclk {
+			rockchip,pins =
+				/* i2s3_sclk */
+				<3 RK_PA1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3_sdi: i2s3-sdi {
+			rockchip,pins =
+				/* i2s3_sdi */
+				<3 RK_PA4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3_sdo: i2s3-sdo {
+			rockchip,pins =
+				/* i2s3_sdo */
+				<3 RK_PA3 3 &pcfg_pull_none>;
+		};
+	};
+
+	jtag {
+		/omit-if-no-ref/
+		jtagm0_pins: jtagm0-pins {
+			rockchip,pins =
+				/* jtag_tck_m0 */
+				<4 RK_PD2 5 &pcfg_pull_none>,
+				/* jtag_tms_m0 */
+				<4 RK_PD3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		jtagm1_pins: jtagm1-pins {
+			rockchip,pins =
+				/* jtag_tck_m1 */
+				<4 RK_PD0 5 &pcfg_pull_none>,
+				/* jtag_tms_m1 */
+				<4 RK_PD1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		jtagm2_pins: jtagm2-pins {
+			rockchip,pins =
+				/* jtag_tck_m2 */
+				<0 RK_PB5 2 &pcfg_pull_none>,
+				/* jtag_tms_m2 */
+				<0 RK_PB6 2 &pcfg_pull_none>;
+		};
+	};
+
+	litcpu {
+		/omit-if-no-ref/
+		litcpu_pins: litcpu-pins {
+			rockchip,pins =
+				/* litcpu_avs */
+				<0 RK_PD3 1 &pcfg_pull_none>;
+		};
+	};
+
+	mcu {
+		/omit-if-no-ref/
+		mcum0_pins: mcum0-pins {
+			rockchip,pins =
+				/* mcu_jtag_tck_m0 */
+				<4 RK_PD4 5 &pcfg_pull_none>,
+				/* mcu_jtag_tms_m0 */
+				<4 RK_PD5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mcum1_pins: mcum1-pins {
+			rockchip,pins =
+				/* mcu_jtag_tck_m1 */
+				<3 RK_PD4 6 &pcfg_pull_none>,
+				/* mcu_jtag_tms_m1 */
+				<3 RK_PD5 6 &pcfg_pull_none>;
+		};
+	};
+
+	mipi {
+		/omit-if-no-ref/
+		mipim0_camera0_clk: mipim0-camera0-clk {
+			rockchip,pins =
+				/* mipim0_camera0_clk */
+				<4 RK_PB1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim0_camera1_clk: mipim0-camera1-clk {
+			rockchip,pins =
+				/* mipim0_camera1_clk */
+				<1 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim0_camera2_clk: mipim0-camera2-clk {
+			rockchip,pins =
+				/* mipim0_camera2_clk */
+				<1 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim0_camera3_clk: mipim0-camera3-clk {
+			rockchip,pins =
+				/* mipim0_camera3_clk */
+				<1 RK_PD6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim0_camera4_clk: mipim0-camera4-clk {
+			rockchip,pins =
+				/* mipim0_camera4_clk */
+				<1 RK_PD7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera0_clk: mipim1-camera0-clk {
+			rockchip,pins =
+				/* mipim1_camera0_clk */
+				<3 RK_PA5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera1_clk: mipim1-camera1-clk {
+			rockchip,pins =
+				/* mipim1_camera1_clk */
+				<3 RK_PA6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera2_clk: mipim1-camera2-clk {
+			rockchip,pins =
+				/* mipim1_camera2_clk */
+				<3 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera3_clk: mipim1-camera3-clk {
+			rockchip,pins =
+				/* mipim1_camera3_clk */
+				<3 RK_PB0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera4_clk: mipim1-camera4-clk {
+			rockchip,pins =
+				/* mipim1_camera4_clk */
+				<3 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipi_te0: mipi-te0 {
+			rockchip,pins =
+				/* mipi_te0 */
+				<3 RK_PC2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipi_te1: mipi-te1 {
+			rockchip,pins =
+				/* mipi_te1 */
+				<3 RK_PC3 2 &pcfg_pull_none>;
+		};
+	};
+
+	npu {
+		/omit-if-no-ref/
+		npu_pins: npu-pins {
+			rockchip,pins =
+				/* npu_avs */
+				<0 RK_PC6 2 &pcfg_pull_none>;
+		};
+	};
+
+	pcie20x1 {
+		/omit-if-no-ref/
+		pcie20x1m0_pins: pcie20x1m0-pins {
+			rockchip,pins =
+				/* pcie20x1_2_clkreqn_m0 */
+				<3 RK_PC7 4 &pcfg_pull_none>,
+				/* pcie20x1_2_perstn_m0 */
+				<3 RK_PD1 4 &pcfg_pull_none>,
+				/* pcie20x1_2_waken_m0 */
+				<3 RK_PD0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20x1m1_pins: pcie20x1m1-pins {
+			rockchip,pins =
+				/* pcie20x1_2_clkreqn_m1 */
+				<4 RK_PB7 4 &pcfg_pull_none>,
+				/* pcie20x1_2_perstn_m1 */
+				<4 RK_PC1 4 &pcfg_pull_none>,
+				/* pcie20x1_2_waken_m1 */
+				<4 RK_PC0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20x1_2_button_rstn: pcie20x1-2-button-rstn {
+			rockchip,pins =
+				/* pcie20x1_2_button_rstn */
+				<4 RK_PB3 4 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30phy {
+		/omit-if-no-ref/
+		pcie30phy_pins: pcie30phy-pins {
+			rockchip,pins =
+				/* pcie30phy_dtb0 */
+				<1 RK_PC4 4 &pcfg_pull_none>,
+				/* pcie30phy_dtb1 */
+				<1 RK_PD1 4 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x1 {
+		/omit-if-no-ref/
+		pcie30x1m0_pins: pcie30x1m0-pins {
+			rockchip,pins =
+				/* pcie30x1_0_clkreqn_m0 */
+				<0 RK_PC0 12 &pcfg_pull_none>,
+				/* pcie30x1_0_perstn_m0 */
+				<0 RK_PC5 12 &pcfg_pull_none>,
+				/* pcie30x1_0_waken_m0 */
+				<0 RK_PC4 12 &pcfg_pull_none>,
+				/* pcie30x1_1_clkreqn_m0 */
+				<0 RK_PB5 12 &pcfg_pull_none>,
+				/* pcie30x1_1_perstn_m0 */
+				<0 RK_PB7 12 &pcfg_pull_none>,
+				/* pcie30x1_1_waken_m0 */
+				<0 RK_PB6 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m1_pins: pcie30x1m1-pins {
+			rockchip,pins =
+				/* pcie30x1_0_clkreqn_m1 */
+				<4 RK_PA3 4 &pcfg_pull_none>,
+				/* pcie30x1_0_perstn_m1 */
+				<4 RK_PA5 4 &pcfg_pull_none>,
+				/* pcie30x1_0_waken_m1 */
+				<4 RK_PA4 4 &pcfg_pull_none>,
+				/* pcie30x1_1_clkreqn_m1 */
+				<4 RK_PA0 4 &pcfg_pull_none>,
+				/* pcie30x1_1_perstn_m1 */
+				<4 RK_PA2 4 &pcfg_pull_none>,
+				/* pcie30x1_1_waken_m1 */
+				<4 RK_PA1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m2_pins: pcie30x1m2-pins {
+			rockchip,pins =
+				/* pcie30x1_0_clkreqn_m2 */
+				<1 RK_PB5 4 &pcfg_pull_none>,
+				/* pcie30x1_0_perstn_m2 */
+				<1 RK_PB4 4 &pcfg_pull_none>,
+				/* pcie30x1_0_waken_m2 */
+				<1 RK_PB3 4 &pcfg_pull_none>,
+				/* pcie30x1_1_clkreqn_m2 */
+				<1 RK_PA0 4 &pcfg_pull_none>,
+				/* pcie30x1_1_perstn_m2 */
+				<1 RK_PA7 4 &pcfg_pull_none>,
+				/* pcie30x1_1_waken_m2 */
+				<1 RK_PA1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1_0_button_rstn: pcie30x1-0-button-rstn {
+			rockchip,pins =
+				/* pcie30x1_0_button_rstn */
+				<4 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1_1_button_rstn: pcie30x1-1-button-rstn {
+			rockchip,pins =
+				/* pcie30x1_1_button_rstn */
+				<4 RK_PB2 4 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x2 {
+		/omit-if-no-ref/
+		pcie30x2m0_pins: pcie30x2m0-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqn_m0 */
+				<0 RK_PD1 12 &pcfg_pull_none>,
+				/* pcie30x2_perstn_m0 */
+				<0 RK_PD4 12 &pcfg_pull_none>,
+				/* pcie30x2_waken_m0 */
+				<0 RK_PD2 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m1_pins: pcie30x2m1-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqn_m1 */
+				<4 RK_PA6 4 &pcfg_pull_none>,
+				/* pcie30x2_perstn_m1 */
+				<4 RK_PB0 4 &pcfg_pull_none>,
+				/* pcie30x2_waken_m1 */
+				<4 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m2_pins: pcie30x2m2-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqn_m2 */
+				<3 RK_PD2 4 &pcfg_pull_none>,
+				/* pcie30x2_perstn_m2 */
+				<3 RK_PD4 4 &pcfg_pull_none>,
+				/* pcie30x2_waken_m2 */
+				<3 RK_PD3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m3_pins: pcie30x2m3-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqn_m3 */
+				<1 RK_PD7 4 &pcfg_pull_none>,
+				/* pcie30x2_perstn_m3 */
+				<1 RK_PB7 4 &pcfg_pull_none>,
+				/* pcie30x2_waken_m3 */
+				<1 RK_PB6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2_button_rstn: pcie30x2-button-rstn {
+			rockchip,pins =
+				/* pcie30x2_button_rstn */
+				<3 RK_PC1 4 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x4 {
+		/omit-if-no-ref/
+		pcie30x4m0_pins: pcie30x4m0-pins {
+			rockchip,pins =
+				/* pcie30x4_clkreqn_m0 */
+				<0 RK_PC6 12 &pcfg_pull_none>,
+				/* pcie30x4_perstn_m0 */
+				<0 RK_PD0 12 &pcfg_pull_none>,
+				/* pcie30x4_waken_m0 */
+				<0 RK_PC7 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m1_pins: pcie30x4m1-pins {
+			rockchip,pins =
+				/* pcie30x4_clkreqn_m1 */
+				<4 RK_PB4 4 &pcfg_pull_none>,
+				/* pcie30x4_perstn_m1 */
+				<4 RK_PB6 4 &pcfg_pull_none>,
+				/* pcie30x4_waken_m1 */
+				<4 RK_PB5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m2_pins: pcie30x4m2-pins {
+			rockchip,pins =
+				/* pcie30x4_clkreqn_m2 */
+				<3 RK_PC4 4 &pcfg_pull_none>,
+				/* pcie30x4_perstn_m2 */
+				<3 RK_PC6 4 &pcfg_pull_none>,
+				/* pcie30x4_waken_m2 */
+				<3 RK_PC5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m3_pins: pcie30x4m3-pins {
+			rockchip,pins =
+				/* pcie30x4_clkreqn_m3 */
+				<1 RK_PB0 4 &pcfg_pull_none>,
+				/* pcie30x4_perstn_m3 */
+				<1 RK_PB2 4 &pcfg_pull_none>,
+				/* pcie30x4_waken_m3 */
+				<1 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4_button_rstn: pcie30x4-button-rstn {
+			rockchip,pins =
+				/* pcie30x4_button_rstn */
+				<3 RK_PD5 4 &pcfg_pull_none>;
+		};
+	};
+
+	pdm0 {
+		/omit-if-no-ref/
+		pdm0m0_clk: pdm0m0-clk {
+			rockchip,pins =
+				/* pdm0_clk0_m0 */
+				<1 RK_PC6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_clk1: pdm0m0-clk1 {
+			rockchip,pins =
+				/* pdm0m0_clk1 */
+				<1 RK_PC4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_sdi0: pdm0m0-sdi0 {
+			rockchip,pins =
+				/* pdm0m0_sdi0 */
+				<1 RK_PD5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_sdi1: pdm0m0-sdi1 {
+			rockchip,pins =
+				/* pdm0m0_sdi1 */
+				<1 RK_PD1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_sdi2: pdm0m0-sdi2 {
+			rockchip,pins =
+				/* pdm0m0_sdi2 */
+				<1 RK_PD2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_sdi3: pdm0m0-sdi3 {
+			rockchip,pins =
+				/* pdm0m0_sdi3 */
+				<1 RK_PD3 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pdm0m1_clk: pdm0m1-clk {
+			rockchip,pins =
+				/* pdm0_clk0_m1 */
+				<0 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_clk1: pdm0m1-clk1 {
+			rockchip,pins =
+				/* pdm0m1_clk1 */
+				<0 RK_PC4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_sdi0: pdm0m1-sdi0 {
+			rockchip,pins =
+				/* pdm0m1_sdi0 */
+				<0 RK_PC7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_sdi1: pdm0m1-sdi1 {
+			rockchip,pins =
+				/* pdm0m1_sdi1 */
+				<0 RK_PD0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_sdi2: pdm0m1-sdi2 {
+			rockchip,pins =
+				/* pdm0m1_sdi2 */
+				<0 RK_PD4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_sdi3: pdm0m1-sdi3 {
+			rockchip,pins =
+				/* pdm0m1_sdi3 */
+				<0 RK_PD6 2 &pcfg_pull_none>;
+		};
+	};
+
+	pdm1 {
+		/omit-if-no-ref/
+		pdm1m0_clk: pdm1m0-clk {
+			rockchip,pins =
+				/* pdm1_clk0_m0 */
+				<4 RK_PD5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_clk1: pdm1m0-clk1 {
+			rockchip,pins =
+				/* pdm1m0_clk1 */
+				<4 RK_PD4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_sdi0: pdm1m0-sdi0 {
+			rockchip,pins =
+				/* pdm1m0_sdi0 */
+				<4 RK_PD3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_sdi1: pdm1m0-sdi1 {
+			rockchip,pins =
+				/* pdm1m0_sdi1 */
+				<4 RK_PD2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_sdi2: pdm1m0-sdi2 {
+			rockchip,pins =
+				/* pdm1m0_sdi2 */
+				<4 RK_PD1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_sdi3: pdm1m0-sdi3 {
+			rockchip,pins =
+				/* pdm1m0_sdi3 */
+				<4 RK_PD0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pdm1m1_clk: pdm1m1-clk {
+			rockchip,pins =
+				/* pdm1_clk0_m1 */
+				<1 RK_PB4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_clk1: pdm1m1-clk1 {
+			rockchip,pins =
+				/* pdm1m1_clk1 */
+				<1 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_sdi0: pdm1m1-sdi0 {
+			rockchip,pins =
+				/* pdm1m1_sdi0 */
+				<1 RK_PA7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_sdi1: pdm1m1-sdi1 {
+			rockchip,pins =
+				/* pdm1m1_sdi1 */
+				<1 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_sdi2: pdm1m1-sdi2 {
+			rockchip,pins =
+				/* pdm1m1_sdi2 */
+				<1 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_sdi3: pdm1m1-sdi3 {
+			rockchip,pins =
+				/* pdm1m1_sdi3 */
+				<1 RK_PB2 2 &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		/omit-if-no-ref/
+		pmic_pins: pmic-pins {
+			rockchip,pins =
+				/* pmic_int_l */
+				<0 RK_PA7 0 &pcfg_pull_up>,
+				/* pmic_sleep1 */
+				<0 RK_PA2 1 &pcfg_pull_none>,
+				/* pmic_sleep2 */
+				<0 RK_PA3 1 &pcfg_pull_none>,
+				/* pmic_sleep3 */
+				<0 RK_PC1 1 &pcfg_pull_none>,
+				/* pmic_sleep4 */
+				<0 RK_PC2 1 &pcfg_pull_none>,
+				/* pmic_sleep5 */
+				<0 RK_PC3 1 &pcfg_pull_none>,
+				/* pmic_sleep6 */
+				<0 RK_PD6 1 &pcfg_pull_none>;
+		};
+	};
+
+	pmu {
+		/omit-if-no-ref/
+		pmu_pins: pmu-pins {
+			rockchip,pins =
+				/* pmu_debug */
+				<0 RK_PA5 3 &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		/omit-if-no-ref/
+		pwm0m0_pins: pwm0m0-pins {
+			rockchip,pins =
+				/* pwm0_m0 */
+				<0 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm0m1_pins: pwm0m1-pins {
+			rockchip,pins =
+				/* pwm0_m1 */
+				<1 RK_PD2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm0m2_pins: pwm0m2-pins {
+			rockchip,pins =
+				/* pwm0_m2 */
+				<1 RK_PA2 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm1 {
+		/omit-if-no-ref/
+		pwm1m0_pins: pwm1m0-pins {
+			rockchip,pins =
+				/* pwm1_m0 */
+				<0 RK_PC0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm1m1_pins: pwm1m1-pins {
+			rockchip,pins =
+				/* pwm1_m1 */
+				<1 RK_PD3 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm1m2_pins: pwm1m2-pins {
+			rockchip,pins =
+				/* pwm1_m2 */
+				<1 RK_PA3 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m0_pins: pwm2m0-pins {
+			rockchip,pins =
+				/* pwm2_m0 */
+				<0 RK_PC4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm2m1_pins: pwm2m1-pins {
+			rockchip,pins =
+				/* pwm2_m1 */
+				<3 RK_PB1 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm3 {
+		/omit-if-no-ref/
+		pwm3m0_pins: pwm3m0-pins {
+			rockchip,pins =
+				/* pwm3_ir_m0 */
+				<0 RK_PD4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm3m1_pins: pwm3m1-pins {
+			rockchip,pins =
+				/* pwm3_ir_m1 */
+				<3 RK_PB2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm3m2_pins: pwm3m2-pins {
+			rockchip,pins =
+				/* pwm3_ir_m2 */
+				<1 RK_PC2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm3m3_pins: pwm3m3-pins {
+			rockchip,pins =
+				/* pwm3_ir_m3 */
+				<1 RK_PA7 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4m0_pins: pwm4m0-pins {
+			rockchip,pins =
+				/* pwm4_m0 */
+				<0 RK_PC5 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5m0_pins: pwm5m0-pins {
+			rockchip,pins =
+				/* pwm5_m0 */
+				<0 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm5m1_pins: pwm5m1-pins {
+			rockchip,pins =
+				/* pwm5_m1 */
+				<0 RK_PC6 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6m0_pins: pwm6m0-pins {
+			rockchip,pins =
+				/* pwm6_m0 */
+				<0 RK_PC7 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm6m1_pins: pwm6m1-pins {
+			rockchip,pins =
+				/* pwm6_m1 */
+				<4 RK_PC1 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7m0_pins: pwm7m0-pins {
+			rockchip,pins =
+				/* pwm7_ir_m0 */
+				<0 RK_PD0 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm7m1_pins: pwm7m1-pins {
+			rockchip,pins =
+				/* pwm7_ir_m1 */
+				<4 RK_PD4 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm7m2_pins: pwm7m2-pins {
+			rockchip,pins =
+				/* pwm7_ir_m2 */
+				<1 RK_PC3 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm8 {
+		/omit-if-no-ref/
+		pwm8m0_pins: pwm8m0-pins {
+			rockchip,pins =
+				/* pwm8_m0 */
+				<3 RK_PA7 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm8m1_pins: pwm8m1-pins {
+			rockchip,pins =
+				/* pwm8_m1 */
+				<4 RK_PD0 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm8m2_pins: pwm8m2-pins {
+			rockchip,pins =
+				/* pwm8_m2 */
+				<3 RK_PD0 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm9 {
+		/omit-if-no-ref/
+		pwm9m0_pins: pwm9m0-pins {
+			rockchip,pins =
+				/* pwm9_m0 */
+				<3 RK_PB0 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm9m1_pins: pwm9m1-pins {
+			rockchip,pins =
+				/* pwm9_m1 */
+				<4 RK_PD1 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm9m2_pins: pwm9m2-pins {
+			rockchip,pins =
+				/* pwm9_m2 */
+				<3 RK_PD1 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm10 {
+		/omit-if-no-ref/
+		pwm10m0_pins: pwm10m0-pins {
+			rockchip,pins =
+				/* pwm10_m0 */
+				<3 RK_PA0 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm10m1_pins: pwm10m1-pins {
+			rockchip,pins =
+				/* pwm10_m1 */
+				<4 RK_PD3 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm10m2_pins: pwm10m2-pins {
+			rockchip,pins =
+				/* pwm10_m2 */
+				<3 RK_PD3 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm11 {
+		/omit-if-no-ref/
+		pwm11m0_pins: pwm11m0-pins {
+			rockchip,pins =
+				/* pwm11_ir_m0 */
+				<3 RK_PA1 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m1_pins: pwm11m1-pins {
+			rockchip,pins =
+				/* pwm11_ir_m1 */
+				<4 RK_PB4 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m2_pins: pwm11m2-pins {
+			rockchip,pins =
+				/* pwm11_ir_m2 */
+				<1 RK_PC4 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m3_pins: pwm11m3-pins {
+			rockchip,pins =
+				/* pwm11_ir_m3 */
+				<3 RK_PD5 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm12 {
+		/omit-if-no-ref/
+		pwm12m0_pins: pwm12m0-pins {
+			rockchip,pins =
+				/* pwm12_m0 */
+				<3 RK_PB5 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm12m1_pins: pwm12m1-pins {
+			rockchip,pins =
+				/* pwm12_m1 */
+				<4 RK_PB5 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm13 {
+		/omit-if-no-ref/
+		pwm13m0_pins: pwm13m0-pins {
+			rockchip,pins =
+				/* pwm13_m0 */
+				<3 RK_PB6 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm13m1_pins: pwm13m1-pins {
+			rockchip,pins =
+				/* pwm13_m1 */
+				<4 RK_PB6 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm13m2_pins: pwm13m2-pins {
+			rockchip,pins =
+				/* pwm13_m2 */
+				<1 RK_PB7 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm14 {
+		/omit-if-no-ref/
+		pwm14m0_pins: pwm14m0-pins {
+			rockchip,pins =
+				/* pwm14_m0 */
+				<3 RK_PC2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm14m1_pins: pwm14m1-pins {
+			rockchip,pins =
+				/* pwm14_m1 */
+				<4 RK_PB2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm14m2_pins: pwm14m2-pins {
+			rockchip,pins =
+				/* pwm14_m2 */
+				<1 RK_PD6 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm15 {
+		/omit-if-no-ref/
+		pwm15m0_pins: pwm15m0-pins {
+			rockchip,pins =
+				/* pwm15_ir_m0 */
+				<3 RK_PC3 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m1_pins: pwm15m1-pins {
+			rockchip,pins =
+				/* pwm15_ir_m1 */
+				<4 RK_PB3 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m2_pins: pwm15m2-pins {
+			rockchip,pins =
+				/* pwm15_ir_m2 */
+				<1 RK_PC6 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m3_pins: pwm15m3-pins {
+			rockchip,pins =
+				/* pwm15_ir_m3 */
+				<1 RK_PD7 11 &pcfg_pull_none>;
+		};
+	};
+
+	refclk {
+		/omit-if-no-ref/
+		refclk_pins: refclk-pins {
+			rockchip,pins =
+				/* refclk_out */
+				<0 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	sata {
+		/omit-if-no-ref/
+		sata_pins: sata-pins {
+			rockchip,pins =
+				/* sata_cp_pod */
+				<0 RK_PC6 13 &pcfg_pull_none>,
+				/* sata_cpdet */
+				<0 RK_PD4 13 &pcfg_pull_none>,
+				/* sata_mp_switch */
+				<0 RK_PD5 13 &pcfg_pull_none>;
+		};
+	};
+
+	sata0 {
+		/omit-if-no-ref/
+		sata0m0_pins: sata0m0-pins {
+			rockchip,pins =
+				/* sata0_act_led_m0 */
+				<4 RK_PB6 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		sata0m1_pins: sata0m1-pins {
+			rockchip,pins =
+				/* sata0_act_led_m1 */
+				<1 RK_PB3 6 &pcfg_pull_none>;
+		};
+	};
+
+	sata1 {
+		/omit-if-no-ref/
+		sata1m0_pins: sata1m0-pins {
+			rockchip,pins =
+				/* sata1_act_led_m0 */
+				<4 RK_PB5 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		sata1m1_pins: sata1m1-pins {
+			rockchip,pins =
+				/* sata1_act_led_m1 */
+				<1 RK_PA1 6 &pcfg_pull_none>;
+		};
+	};
+
+	sata2 {
+		/omit-if-no-ref/
+		sata2m0_pins: sata2m0-pins {
+			rockchip,pins =
+				/* sata2_act_led_m0 */
+				<4 RK_PB1 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		sata2m1_pins: sata2m1-pins {
+			rockchip,pins =
+				/* sata2_act_led_m1 */
+				<1 RK_PB7 6 &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		/omit-if-no-ref/
+		sdiom1_pins: sdiom1-pins {
+			rockchip,pins =
+				/* sdio_clk_m1 */
+				<3 RK_PA5 2 &pcfg_pull_none>,
+				/* sdio_cmd_m1 */
+				<3 RK_PA4 2 &pcfg_pull_none>,
+				/* sdio_d0_m1 */
+				<3 RK_PA0 2 &pcfg_pull_none>,
+				/* sdio_d1_m1 */
+				<3 RK_PA1 2 &pcfg_pull_none>,
+				/* sdio_d2_m1 */
+				<3 RK_PA2 2 &pcfg_pull_none>,
+				/* sdio_d3_m1 */
+				<3 RK_PA3 2 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/omit-if-no-ref/
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				/* sdmmc_d0 */
+				<4 RK_PD0 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc_d1 */
+				<4 RK_PD1 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc_d2 */
+				<4 RK_PD2 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc_d3 */
+				<4 RK_PD3 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				/* sdmmc_clk */
+				<4 RK_PD5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				/* sdmmc_cmd */
+				<4 RK_PD4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_det: sdmmc-det {
+			rockchip,pins =
+				/* sdmmc_det */
+				<0 RK_PA4 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_pwren: sdmmc-pwren {
+			rockchip,pins =
+				/* sdmmc_pwren */
+				<0 RK_PA5 2 &pcfg_pull_none>;
+		};
+	};
+
+	spdif0 {
+		/omit-if-no-ref/
+		spdif0m0_tx: spdif0m0-tx {
+			rockchip,pins =
+				/* spdif0m0_tx */
+				<1 RK_PB6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdif0m1_tx: spdif0m1-tx {
+			rockchip,pins =
+				/* spdif0m1_tx */
+				<4 RK_PB4 6 &pcfg_pull_none>;
+		};
+	};
+
+	spdif1 {
+		/omit-if-no-ref/
+		spdif1m0_tx: spdif1m0-tx {
+			rockchip,pins =
+				/* spdif1m0_tx */
+				<1 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdif1m1_tx: spdif1m1-tx {
+			rockchip,pins =
+				/* spdif1m1_tx */
+				<4 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdif1m2_tx: spdif1m2-tx {
+			rockchip,pins =
+				/* spdif1m2_tx */
+				<4 RK_PC1 3 &pcfg_pull_none>;
+		};
+	};
+
+	spi0 {
+		/omit-if-no-ref/
+		spi0m0_pins: spi0m0-pins {
+			rockchip,pins =
+				/* spi0_clk_m0 */
+				<0 RK_PC6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_miso_m0 */
+				<0 RK_PC7 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosi_m0 */
+				<0 RK_PC0 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs0: spi0m0-cs0 {
+			rockchip,pins =
+				/* spi0_cs0_m0 */
+				<0 RK_PD1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs1: spi0m0-cs1 {
+			rockchip,pins =
+				/* spi0_cs1_m0 */
+				<0 RK_PB7 8 &pcfg_pull_up_drv_level_1>;
+		};
+		/omit-if-no-ref/
+		spi0m1_pins: spi0m1-pins {
+			rockchip,pins =
+				/* spi0_clk_m1 */
+				<4 RK_PA2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_miso_m1 */
+				<4 RK_PA0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosi_m1 */
+				<4 RK_PA1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_cs0: spi0m1-cs0 {
+			rockchip,pins =
+				/* spi0_cs0_m1 */
+				<4 RK_PB2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_cs1: spi0m1-cs1 {
+			rockchip,pins =
+				/* spi0_cs1_m1 */
+				<4 RK_PB1 8 &pcfg_pull_up_drv_level_1>;
+		};
+		/omit-if-no-ref/
+		spi0m2_pins: spi0m2-pins {
+			rockchip,pins =
+				/* spi0_clk_m2 */
+				<1 RK_PB3 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_miso_m2 */
+				<1 RK_PB1 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosi_m2 */
+				<1 RK_PB2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m2_cs0: spi0m2-cs0 {
+			rockchip,pins =
+				/* spi0_cs0_m2 */
+				<1 RK_PB4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m2_cs1: spi0m2-cs1 {
+			rockchip,pins =
+				/* spi0_cs1_m2 */
+				<1 RK_PB5 8 &pcfg_pull_up_drv_level_1>;
+		};
+		/omit-if-no-ref/
+		spi0m3_pins: spi0m3-pins {
+			rockchip,pins =
+				/* spi0_clk_m3 */
+				<3 RK_PD3 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_miso_m3 */
+				<3 RK_PD1 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosi_m3 */
+				<3 RK_PD2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m3_cs0: spi0m3-cs0 {
+			rockchip,pins =
+				/* spi0_cs0_m3 */
+				<3 RK_PD4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m3_cs1: spi0m3-cs1 {
+			rockchip,pins =
+				/* spi0_cs1_m3 */
+				<3 RK_PD5 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi1 {
+		/omit-if-no-ref/
+		spi1m1_pins: spi1m1-pins {
+			rockchip,pins =
+				/* spi1_clk_m1 */
+				<3 RK_PC1 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_miso_m1 */
+				<3 RK_PC0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosi_m1 */
+				<3 RK_PB7 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_cs0: spi1m1-cs0 {
+			rockchip,pins =
+				/* spi1_cs0_m1 */
+				<3 RK_PC2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_cs1: spi1m1-cs1 {
+			rockchip,pins =
+				/* spi1_cs1_m1 */
+				<3 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m2_pins: spi1m2-pins {
+			rockchip,pins =
+				/* spi1_clk_m2 */
+				<1 RK_PD2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_miso_m2 */
+				<1 RK_PD0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosi_m2 */
+				<1 RK_PD1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m2_cs0: spi1m2-cs0 {
+			rockchip,pins =
+				/* spi1_cs0_m2 */
+				<1 RK_PD3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m2_cs1: spi1m2-cs1 {
+			rockchip,pins =
+				/* spi1_cs1_m2 */
+				<1 RK_PD5 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi2 {
+		/omit-if-no-ref/
+		spi2m0_pins: spi2m0-pins {
+			rockchip,pins =
+				/* spi2_clk_m0 */
+				<1 RK_PA6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi2_miso_m0 */
+				<1 RK_PA4 8 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosi_m0 */
+				<1 RK_PA5 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs0: spi2m0-cs0 {
+			rockchip,pins =
+				/* spi2_cs0_m0 */
+				<1 RK_PA7 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs1: spi2m0-cs1 {
+			rockchip,pins =
+				/* spi2_cs1_m0 */
+				<1 RK_PB0 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_pins: spi2m1-pins {
+			rockchip,pins =
+				/* spi2_clk_m1 */
+				<4 RK_PA6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi2_miso_m1 */
+				<4 RK_PA4 8 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosi_m1 */
+				<4 RK_PA5 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs0: spi2m1-cs0 {
+			rockchip,pins =
+				/* spi2_cs0_m1 */
+				<4 RK_PA7 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs1: spi2m1-cs1 {
+			rockchip,pins =
+				/* spi2_cs1_m1 */
+				<4 RK_PB0 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m2_pins: spi2m2-pins {
+			rockchip,pins =
+				/* spi2_clk_m2 */
+				<0 RK_PA5 1 &pcfg_pull_up_drv_level_1>,
+				/* spi2_miso_m2 */
+				<0 RK_PB3 1 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosi_m2 */
+				<0 RK_PA6 1 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m2_cs0: spi2m2-cs0 {
+			rockchip,pins =
+				/* spi2_cs0_m2 */
+				<0 RK_PB1 1 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m2_cs1: spi2m2-cs1 {
+			rockchip,pins =
+				/* spi2_cs1_m2 */
+				<0 RK_PB0 1 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi3 {
+		/omit-if-no-ref/
+		spi3m1_pins: spi3m1-pins {
+			rockchip,pins =
+				/* spi3_clk_m1 */
+				<4 RK_PB7 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_miso_m1 */
+				<4 RK_PB5 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosi_m1 */
+				<4 RK_PB6 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs0: spi3m1-cs0 {
+			rockchip,pins =
+				/* spi3_cs0_m1 */
+				<4 RK_PC0 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs1: spi3m1-cs1 {
+			rockchip,pins =
+				/* spi3_cs1_m1 */
+				<4 RK_PC1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m2_pins: spi3m2-pins {
+			rockchip,pins =
+				/* spi3_clk_m2 */
+				<0 RK_PD3 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_miso_m2 */
+				<0 RK_PD0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosi_m2 */
+				<0 RK_PD2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m2_cs0: spi3m2-cs0 {
+			rockchip,pins =
+				/* spi3_cs0_m2 */
+				<0 RK_PD4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m2_cs1: spi3m2-cs1 {
+			rockchip,pins =
+				/* spi3_cs1_m2 */
+				<0 RK_PD5 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m3_pins: spi3m3-pins {
+			rockchip,pins =
+				/* spi3_clk_m3 */
+				<3 RK_PD0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_miso_m3 */
+				<3 RK_PC6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosi_m3 */
+				<3 RK_PC7 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m3_cs0: spi3m3-cs0 {
+			rockchip,pins =
+				/* spi3_cs0_m3 */
+				<3 RK_PC4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m3_cs1: spi3m3-cs1 {
+			rockchip,pins =
+				/* spi3_cs1_m3 */
+				<3 RK_PC5 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi4 {
+		/omit-if-no-ref/
+		spi4m0_pins: spi4m0-pins {
+			rockchip,pins =
+				/* spi4_clk_m0 */
+				<1 RK_PC2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_miso_m0 */
+				<1 RK_PC0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_mosi_m0 */
+				<1 RK_PC1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m0_cs0: spi4m0-cs0 {
+			rockchip,pins =
+				/* spi4_cs0_m0 */
+				<1 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m0_cs1: spi4m0-cs1 {
+			rockchip,pins =
+				/* spi4_cs1_m0 */
+				<1 RK_PC4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m1_pins: spi4m1-pins {
+			rockchip,pins =
+				/* spi4_clk_m1 */
+				<3 RK_PA2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_miso_m1 */
+				<3 RK_PA0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_mosi_m1 */
+				<3 RK_PA1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m1_cs0: spi4m1-cs0 {
+			rockchip,pins =
+				/* spi4_cs0_m1 */
+				<3 RK_PA3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m1_cs1: spi4m1-cs1 {
+			rockchip,pins =
+				/* spi4_cs1_m1 */
+				<3 RK_PA4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m2_pins: spi4m2-pins {
+			rockchip,pins =
+				/* spi4_clk_m2 */
+				<1 RK_PA2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_miso_m2 */
+				<1 RK_PA0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_mosi_m2 */
+				<1 RK_PA1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m2_cs0: spi4m2-cs0 {
+			rockchip,pins =
+				/* spi4_cs0_m2 */
+				<1 RK_PA3 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	tsadc {
+		/omit-if-no-ref/
+		tsadcm1_shut: tsadcm1-shut {
+			rockchip,pins =
+				/* tsadcm1_shut */
+				<0 RK_PA2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadc_shut: tsadc-shut {
+			rockchip,pins =
+				/* tsadc_shut */
+				<0 RK_PA1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadc_shut_org: tsadc-shut-org {
+			rockchip,pins =
+				/* tsadc_shut_org */
+				<0 RK_PA1 1 &pcfg_pull_none>;
+		};
+	};
+
+	uart0 {
+		/omit-if-no-ref/
+		uart0m0_xfer: uart0m0-xfer {
+			rockchip,pins =
+				/* uart0_rx_m0 */
+				<0 RK_PC4 4 &pcfg_pull_up>,
+				/* uart0_tx_m0 */
+				<0 RK_PC5 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0m1_xfer: uart0m1-xfer {
+			rockchip,pins =
+				/* uart0_rx_m1 */
+				<0 RK_PB0 4 &pcfg_pull_up>,
+				/* uart0_tx_m1 */
+				<0 RK_PB1 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0m2_xfer: uart0m2-xfer {
+			rockchip,pins =
+				/* uart0_rx_m2 */
+				<4 RK_PA4 10 &pcfg_pull_up>,
+				/* uart0_tx_m2 */
+				<4 RK_PA3 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0_ctsn: uart0-ctsn {
+			rockchip,pins =
+				/* uart0_ctsn */
+				<0 RK_PD1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart0_rtsn: uart0-rtsn {
+			rockchip,pins =
+				/* uart0_rtsn */
+				<0 RK_PC6 4 &pcfg_pull_none>;
+		};
+	};
+
+	uart1 {
+		/omit-if-no-ref/
+		uart1m1_xfer: uart1m1-xfer {
+			rockchip,pins =
+				/* uart1_rx_m1 */
+				<1 RK_PB7 10 &pcfg_pull_up>,
+				/* uart1_tx_m1 */
+				<1 RK_PB6 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_ctsn: uart1m1-ctsn {
+			rockchip,pins =
+				/* uart1m1_ctsn */
+				<1 RK_PD7 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_rtsn: uart1m1-rtsn {
+			rockchip,pins =
+				/* uart1m1_rtsn */
+				<1 RK_PD6 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m2_xfer: uart1m2-xfer {
+			rockchip,pins =
+				/* uart1_rx_m2 */
+				<0 RK_PD2 10 &pcfg_pull_up>,
+				/* uart1_tx_m2 */
+				<0 RK_PD1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m2_ctsn: uart1m2-ctsn {
+			rockchip,pins =
+				/* uart1m2_ctsn */
+				<0 RK_PD0 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m2_rtsn: uart1m2-rtsn {
+			rockchip,pins =
+				/* uart1m2_rtsn */
+				<0 RK_PC7 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart2 {
+		/omit-if-no-ref/
+		uart2m0_xfer: uart2m0-xfer {
+			rockchip,pins =
+				/* uart2_rx_m0 */
+				<0 RK_PB6 10 &pcfg_pull_up>,
+				/* uart2_tx_m0 */
+				<0 RK_PB5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rx_m1 */
+				<4 RK_PD1 10 &pcfg_pull_up>,
+				/* uart2_tx_m1 */
+				<4 RK_PD0 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m2_xfer: uart2m2-xfer {
+			rockchip,pins =
+				/* uart2_rx_m2 */
+				<3 RK_PB2 10 &pcfg_pull_up>,
+				/* uart2_tx_m2 */
+				<3 RK_PB1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2_ctsn: uart2-ctsn {
+			rockchip,pins =
+				/* uart2_ctsn */
+				<3 RK_PB4 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart2_rtsn: uart2-rtsn {
+			rockchip,pins =
+				/* uart2_rtsn */
+				<3 RK_PB3 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rx_m0 */
+				<1 RK_PC0 10 &pcfg_pull_up>,
+				/* uart3_tx_m0 */
+				<1 RK_PC1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m1_xfer: uart3m1-xfer {
+			rockchip,pins =
+				/* uart3_rx_m1 */
+				<3 RK_PB6 10 &pcfg_pull_up>,
+				/* uart3_tx_m1 */
+				<3 RK_PB5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m2_xfer: uart3m2-xfer {
+			rockchip,pins =
+				/* uart3_rx_m2 */
+				<4 RK_PA6 10 &pcfg_pull_up>,
+				/* uart3_tx_m2 */
+				<4 RK_PA5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3_ctsn: uart3-ctsn {
+			rockchip,pins =
+				/* uart3_ctsn */
+				<1 RK_PC3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart3_rtsn: uart3-rtsn {
+			rockchip,pins =
+				/* uart3_rtsn */
+				<1 RK_PC2 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart4 {
+		/omit-if-no-ref/
+		uart4m0_xfer: uart4m0-xfer {
+			rockchip,pins =
+				/* uart4_rx_m0 */
+				<1 RK_PD3 10 &pcfg_pull_up>,
+				/* uart4_tx_m0 */
+				<1 RK_PD2 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m1_xfer: uart4m1-xfer {
+			rockchip,pins =
+				/* uart4_rx_m1 */
+				<3 RK_PD0 10 &pcfg_pull_up>,
+				/* uart4_tx_m1 */
+				<3 RK_PD1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m2_xfer: uart4m2-xfer {
+			rockchip,pins =
+				/* uart4_rx_m2 */
+				<1 RK_PB2 10 &pcfg_pull_up>,
+				/* uart4_tx_m2 */
+				<1 RK_PB3 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4_ctsn: uart4-ctsn {
+			rockchip,pins =
+				/* uart4_ctsn */
+				<1 RK_PC7 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart4_rtsn: uart4-rtsn {
+			rockchip,pins =
+				/* uart4_rtsn */
+				<1 RK_PC5 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rx_m0 */
+				<4 RK_PD4 10 &pcfg_pull_up>,
+				/* uart5_tx_m0 */
+				<4 RK_PD5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_ctsn: uart5m0-ctsn {
+			rockchip,pins =
+				/* uart5m0_ctsn */
+				<4 RK_PD2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_rtsn: uart5m0-rtsn {
+			rockchip,pins =
+				/* uart5m0_rtsn */
+				<4 RK_PD3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_xfer: uart5m1-xfer {
+			rockchip,pins =
+				/* uart5_rx_m1 */
+				<3 RK_PC5 10 &pcfg_pull_up>,
+				/* uart5_tx_m1 */
+				<3 RK_PC4 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_ctsn: uart5m1-ctsn {
+			rockchip,pins =
+				/* uart5m1_ctsn */
+				<2 RK_PA2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_rtsn: uart5m1-rtsn {
+			rockchip,pins =
+				/* uart5m1_rtsn */
+				<2 RK_PA3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m2_xfer: uart5m2-xfer {
+			rockchip,pins =
+				/* uart5_rx_m2 */
+				<2 RK_PD4 10 &pcfg_pull_up>,
+				/* uart5_tx_m2 */
+				<2 RK_PD5 10 &pcfg_pull_up>;
+		};
+	};
+
+	uart6 {
+		/omit-if-no-ref/
+		uart6m1_xfer: uart6m1-xfer {
+			rockchip,pins =
+				/* uart6_rx_m1 */
+				<1 RK_PA0 10 &pcfg_pull_up>,
+				/* uart6_tx_m1 */
+				<1 RK_PA1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_ctsn: uart6m1-ctsn {
+			rockchip,pins =
+				/* uart6m1_ctsn */
+				<1 RK_PA3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_rtsn: uart6m1-rtsn {
+			rockchip,pins =
+				/* uart6m1_rtsn */
+				<1 RK_PA2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m2_xfer: uart6m2-xfer {
+			rockchip,pins =
+				/* uart6_rx_m2 */
+				<1 RK_PD1 10 &pcfg_pull_up>,
+				/* uart6_tx_m2 */
+				<1 RK_PD0 10 &pcfg_pull_up>;
+		};
+	};
+
+	uart7 {
+		/omit-if-no-ref/
+		uart7m1_xfer: uart7m1-xfer {
+			rockchip,pins =
+				/* uart7_rx_m1 */
+				<3 RK_PC1 10 &pcfg_pull_up>,
+				/* uart7_tx_m1 */
+				<3 RK_PC0 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_ctsn: uart7m1-ctsn {
+			rockchip,pins =
+				/* uart7m1_ctsn */
+				<3 RK_PC3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_rtsn: uart7m1-rtsn {
+			rockchip,pins =
+				/* uart7m1_rtsn */
+				<3 RK_PC2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m2_xfer: uart7m2-xfer {
+			rockchip,pins =
+				/* uart7_rx_m2 */
+				<1 RK_PB4 10 &pcfg_pull_up>,
+				/* uart7_tx_m2 */
+				<1 RK_PB5 10 &pcfg_pull_up>;
+		};
+	};
+
+	uart8 {
+		/omit-if-no-ref/
+		uart8m0_xfer: uart8m0-xfer {
+			rockchip,pins =
+				/* uart8_rx_m0 */
+				<4 RK_PB1 10 &pcfg_pull_up>,
+				/* uart8_tx_m0 */
+				<4 RK_PB0 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_ctsn: uart8m0-ctsn {
+			rockchip,pins =
+				/* uart8m0_ctsn */
+				<4 RK_PB3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_rtsn: uart8m0-rtsn {
+			rockchip,pins =
+				/* uart8m0_rtsn */
+				<4 RK_PB2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_xfer: uart8m1-xfer {
+			rockchip,pins =
+				/* uart8_rx_m1 */
+				<3 RK_PA3 10 &pcfg_pull_up>,
+				/* uart8_tx_m1 */
+				<3 RK_PA2 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_ctsn: uart8m1-ctsn {
+			rockchip,pins =
+				/* uart8m1_ctsn */
+				<3 RK_PA5 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_rtsn: uart8m1-rtsn {
+			rockchip,pins =
+				/* uart8m1_rtsn */
+				<3 RK_PA4 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8_xfer: uart8-xfer {
+			rockchip,pins =
+				/* uart8_rx_ */
+				<4 RK_PB1 10 &pcfg_pull_up>;
+		};
+	};
+
+	uart9 {
+		/omit-if-no-ref/
+		uart9m1_xfer: uart9m1-xfer {
+			rockchip,pins =
+				/* uart9_rx_m1 */
+				<4 RK_PB5 10 &pcfg_pull_up>,
+				/* uart9_tx_m1 */
+				<4 RK_PB4 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m1_ctsn: uart9m1-ctsn {
+			rockchip,pins =
+				/* uart9m1_ctsn */
+				<4 RK_PA1 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m1_rtsn: uart9m1-rtsn {
+			rockchip,pins =
+				/* uart9m1_rtsn */
+				<4 RK_PA0 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m2_xfer: uart9m2-xfer {
+			rockchip,pins =
+				/* uart9_rx_m2 */
+				<3 RK_PD4 10 &pcfg_pull_up>,
+				/* uart9_tx_m2 */
+				<3 RK_PD5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m2_ctsn: uart9m2-ctsn {
+			rockchip,pins =
+				/* uart9m2_ctsn */
+				<3 RK_PD3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m2_rtsn: uart9m2-rtsn {
+			rockchip,pins =
+				/* uart9m2_rtsn */
+				<3 RK_PD2 10 &pcfg_pull_none>;
+		};
+	};
+
+	vop {
+		/omit-if-no-ref/
+		vop_pins: vop-pins {
+			rockchip,pins =
+				/* vop_post_empty */
+				<1 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+};
+
+/*
+ * This part is edited handly.
+ */
+&pinctrl {
+	bt656 {
+		/omit-if-no-ref/
+		bt656_pins: bt656-pins {
+			rockchip,pins =
+				/* bt1120_clkout */
+				<4 RK_PB0 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d0 */
+				<4 RK_PA0 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d1 */
+				<4 RK_PA1 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d2 */
+				<4 RK_PA2 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d3 */
+				<4 RK_PA3 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d4 */
+				<4 RK_PA4 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d5 */
+				<4 RK_PA5 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d6 */
+				<4 RK_PA6 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d7 */
+				<4 RK_PA7 2 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	gpio-func {
+		/omit-if-no-ref/
+		tsadc_gpio_func: tsadc-gpio-func {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
new file mode 100644
index 0000000000..8347adcbd0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -0,0 +1,736 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Radxa ROCK 5 Model A";
+	compatible = "radxa,rock-5a", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&io_led>;
+
+		io-led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 95 145 195 255>;
+		fan-supply = <&vcc_5v0>;
+		pwms = <&pwm3 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_5v0: vcc-5v0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_5v0_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5m2_xfer>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	pinctrl-names = "default";
+	tx_delay = <0x3a>;
+	rx_delay = <0x3e>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	leds {
+		io_led: io-led {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	power {
+		vcc_5v0_en: vcc-5v0-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifibt {
+		wl_reset: wl-reset {
+			rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wl_dis: wl-dis {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		wl_wake_host: wl-wake-host {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_dis: bt-dis {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s0>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	status = "okay";
+	phy-supply = <&vcc5v0_host>;
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl_reset &wl_dis &wl_wake_host &bt_dis &bt_wake_host>;
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
new file mode 100644
index 0000000000..4aa516ff15
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -0,0 +1,2310 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rk3588-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/rk3588-power.h>
+#include <dt-bindings/reset/rockchip,rk3588-cru.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/ata/ahci.h>
+
+/ {
+	compatible = "rockchip,rk3588";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_l0>;
+				};
+				core1 {
+					cpu = <&cpu_l1>;
+				};
+				core2 {
+					cpu = <&cpu_l2>;
+				};
+				core3 {
+					cpu = <&cpu_l3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu_b0>;
+				};
+				core1 {
+					cpu = <&cpu_b1>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu_b2>;
+				};
+				core1 {
+					cpu = <&cpu_b3>;
+				};
+			};
+		};
+
+		cpu_l0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <530>;
+			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			assigned-clock-rates = <816000000>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+			dynamic-power-coefficient = <228>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_l1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <530>;
+			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l1>;
+			dynamic-power-coefficient = <228>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_l2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <530>;
+			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l2>;
+			dynamic-power-coefficient = <228>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_l3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <530>;
+			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l3>;
+			dynamic-power-coefficient = <228>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_b0: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x400>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+			assigned-clock-rates = <816000000>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b0>;
+			dynamic-power-coefficient = <416>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_b1: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x500>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b1>;
+			dynamic-power-coefficient = <416>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_b2: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x600>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+			assigned-clock-rates = <816000000>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b2>;
+			dynamic-power-coefficient = <416>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_b3: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x700>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b3>;
+			dynamic-power-coefficient = <416>;
+			#cooling-cells = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <100>;
+				exit-latency-us = <120>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l1: l2-cache-l1 {
+			compatible = "cache";
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l2: l2-cache-l2 {
+			compatible = "cache";
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l3: l2-cache-l3 {
+			compatible = "cache";
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_b0: l2-cache-b0 {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_b1: l2-cache-b1 {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_b2: l2-cache-b2 {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_b3: l2-cache-b3 {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <3145728>;
+			cache-line-size = <64>;
+			cache-sets = <4096>;
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82000010>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	spll: clock-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <702000000>;
+		clock-output-names = "spll";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+
+	xin24m: clock-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	xin32k: clock-2 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		#clock-cells = <0>;
+	};
+
+	pmu_sram: sram@10f000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x0010f000 0x0 0x100>;
+		ranges = <0 0x0 0x0010f000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x100>;
+		};
+	};
+
+	usb_host0_ehci: usb@fc800000 {
+		compatible = "rockchip,rk3588-ehci", "generic-ehci";
+		reg = <0x0 0xfc800000 0x0 0x40000>;
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
+		phys = <&u2phy2_host>;
+		phy-names = "usb";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@fc840000 {
+		compatible = "rockchip,rk3588-ohci", "generic-ohci";
+		reg = <0x0 0xfc840000 0x0 0x40000>;
+		interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
+		phys = <&u2phy2_host>;
+		phy-names = "usb";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@fc880000 {
+		compatible = "rockchip,rk3588-ehci", "generic-ehci";
+		reg = <0x0 0xfc880000 0x0 0x40000>;
+		interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
+		phys = <&u2phy3_host>;
+		phy-names = "usb";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@fc8c0000 {
+		compatible = "rockchip,rk3588-ohci", "generic-ohci";
+		reg = <0x0 0xfc8c0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
+		phys = <&u2phy3_host>;
+		phy-names = "usb";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	sys_grf: syscon@fd58c000 {
+		compatible = "rockchip,rk3588-sys-grf", "syscon";
+		reg = <0x0 0xfd58c000 0x0 0x1000>;
+	};
+
+	php_grf: syscon@fd5b0000 {
+		compatible = "rockchip,rk3588-php-grf", "syscon";
+		reg = <0x0 0xfd5b0000 0x0 0x1000>;
+	};
+
+	pipe_phy0_grf: syscon@fd5bc000 {
+		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfd5bc000 0x0 0x100>;
+	};
+
+	pipe_phy2_grf: syscon@fd5c4000 {
+		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfd5c4000 0x0 0x100>;
+	};
+
+	usb2phy2_grf: syscon@fd5d8000 {
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xfd5d8000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy2: usb2-phy@8000 {
+			compatible = "rockchip,rk3588-usb2phy";
+			reg = <0x8000 0x10>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
+			reset-names = "phy", "apb";
+			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy2";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy2_host: host-port {
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usb2phy3_grf: syscon@fd5dc000 {
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xfd5dc000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy3: usb2-phy@c000 {
+			compatible = "rockchip,rk3588-usb2phy";
+			reg = <0xc000 0x10>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
+			reset-names = "phy", "apb";
+			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy3";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy3_host: host-port {
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ioc: syscon@fd5f0000 {
+		compatible = "rockchip,rk3588-ioc", "syscon";
+		reg = <0x0 0xfd5f0000 0x0 0x10000>;
+	};
+
+	system_sram1: sram@fd600000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0xfd600000 0x0 0x100000>;
+		ranges = <0x0 0x0 0xfd600000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	cru: clock-controller@fd7c0000 {
+		compatible = "rockchip,rk3588-cru";
+		reg = <0x0 0xfd7c0000 0x0 0x5c000>;
+		assigned-clocks =
+			<&cru PLL_PPLL>, <&cru PLL_AUPLL>,
+			<&cru PLL_NPLL>, <&cru PLL_GPLL>,
+			<&cru ACLK_CENTER_ROOT>,
+			<&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>,
+			<&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>,
+			<&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>,
+			<&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>,
+			<&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>,
+			<&cru CLK_GPU>;
+		assigned-clock-rates =
+			<1100000000>, <786432000>,
+			<850000000>, <1188000000>,
+			<702000000>,
+			<400000000>, <500000000>,
+			<800000000>, <100000000>,
+			<400000000>, <100000000>,
+			<200000000>, <500000000>,
+			<375000000>, <150000000>,
+			<200000000>;
+		rockchip,grf = <&php_grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	i2c0: i2c@fd880000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfd880000 0x0 0x1000>;
+		interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c0m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@fd890000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfd890000 0x0 0x100>;
+		interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 6>, <&dmac0 7>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart0m1_xfer>;
+		pinctrl-names = "default";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@fd8b0000 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfd8b0000 0x0 0x10>;
+		clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm0m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@fd8b0010 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfd8b0010 0x0 0x10>;
+		clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm1m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@fd8b0020 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfd8b0020 0x0 0x10>;
+		clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm2m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@fd8b0030 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfd8b0030 0x0 0x10>;
+		clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm3m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pmu: power-management@fd8d8000 {
+		compatible = "rockchip,rk3588-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xfd8d8000 0x0 0x400>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3588-power-controller";
+			#address-cells = <1>;
+			#power-domain-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			/* These power domains are grouped by VD_NPU */
+			power-domain@RK3588_PD_NPU {
+				reg = <RK3588_PD_NPU>;
+				#power-domain-cells = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				power-domain@RK3588_PD_NPUTOP {
+					reg = <RK3588_PD_NPUTOP>;
+					clocks = <&cru HCLK_NPU_ROOT>,
+						 <&cru PCLK_NPU_ROOT>,
+						 <&cru CLK_NPU_DSU0>,
+						 <&cru HCLK_NPU_CM0_ROOT>;
+					pm_qos = <&qos_npu0_mwr>,
+						 <&qos_npu0_mro>,
+						 <&qos_mcu_npu>;
+					#power-domain-cells = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@RK3588_PD_NPU1 {
+						reg = <RK3588_PD_NPU1>;
+						clocks = <&cru HCLK_NPU_ROOT>,
+							 <&cru PCLK_NPU_ROOT>,
+							 <&cru CLK_NPU_DSU0>;
+						pm_qos = <&qos_npu1>;
+						#power-domain-cells = <0>;
+					};
+					power-domain@RK3588_PD_NPU2 {
+						reg = <RK3588_PD_NPU2>;
+						clocks = <&cru HCLK_NPU_ROOT>,
+							 <&cru PCLK_NPU_ROOT>,
+							 <&cru CLK_NPU_DSU0>;
+						pm_qos = <&qos_npu2>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+			/* These power domains are grouped by VD_GPU */
+			power-domain@RK3588_PD_GPU {
+				reg = <RK3588_PD_GPU>;
+				clocks = <&cru CLK_GPU>,
+					 <&cru CLK_GPU_COREGROUP>,
+					 <&cru CLK_GPU_STACKS>;
+				pm_qos = <&qos_gpu_m0>,
+					 <&qos_gpu_m1>,
+					 <&qos_gpu_m2>,
+					 <&qos_gpu_m3>;
+				#power-domain-cells = <0>;
+			};
+			/* These power domains are grouped by VD_VCODEC */
+			power-domain@RK3588_PD_VCODEC {
+				reg = <RK3588_PD_VCODEC>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				power-domain@RK3588_PD_RKVDEC0 {
+					reg = <RK3588_PD_RKVDEC0>;
+					clocks = <&cru HCLK_RKVDEC0>,
+						 <&cru HCLK_VDPU_ROOT>,
+						 <&cru ACLK_VDPU_ROOT>,
+						 <&cru ACLK_RKVDEC0>,
+						 <&cru ACLK_RKVDEC_CCU>;
+					pm_qos = <&qos_rkvdec0>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_RKVDEC1 {
+					reg = <RK3588_PD_RKVDEC1>;
+					clocks = <&cru HCLK_RKVDEC1>,
+						 <&cru HCLK_VDPU_ROOT>,
+						 <&cru ACLK_VDPU_ROOT>,
+						 <&cru ACLK_RKVDEC1>;
+					pm_qos = <&qos_rkvdec1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_VENC0 {
+					reg = <RK3588_PD_VENC0>;
+					clocks = <&cru HCLK_RKVENC0>,
+						 <&cru ACLK_RKVENC0>;
+					pm_qos = <&qos_rkvenc0_m0ro>,
+						 <&qos_rkvenc0_m1ro>,
+						 <&qos_rkvenc0_m2wo>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					power-domain@RK3588_PD_VENC1 {
+						reg = <RK3588_PD_VENC1>;
+						clocks = <&cru HCLK_RKVENC1>,
+							 <&cru HCLK_RKVENC0>,
+							 <&cru ACLK_RKVENC0>,
+							 <&cru ACLK_RKVENC1>;
+						pm_qos = <&qos_rkvenc1_m0ro>,
+							 <&qos_rkvenc1_m1ro>,
+							 <&qos_rkvenc1_m2wo>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+			/* These power domains are grouped by VD_LOGIC */
+			power-domain@RK3588_PD_VDPU {
+				reg = <RK3588_PD_VDPU>;
+				clocks = <&cru HCLK_VDPU_ROOT>,
+					 <&cru ACLK_VDPU_LOW_ROOT>,
+					 <&cru ACLK_VDPU_ROOT>,
+					 <&cru ACLK_JPEG_DECODER_ROOT>,
+					 <&cru ACLK_IEP2P0>,
+					 <&cru HCLK_IEP2P0>,
+					 <&cru ACLK_JPEG_ENCODER0>,
+					 <&cru HCLK_JPEG_ENCODER0>,
+					 <&cru ACLK_JPEG_ENCODER1>,
+					 <&cru HCLK_JPEG_ENCODER1>,
+					 <&cru ACLK_JPEG_ENCODER2>,
+					 <&cru HCLK_JPEG_ENCODER2>,
+					 <&cru ACLK_JPEG_ENCODER3>,
+					 <&cru HCLK_JPEG_ENCODER3>,
+					 <&cru ACLK_JPEG_DECODER>,
+					 <&cru HCLK_JPEG_DECODER>,
+					 <&cru ACLK_RGA2>,
+					 <&cru HCLK_RGA2>;
+				pm_qos = <&qos_iep>,
+					 <&qos_jpeg_dec>,
+					 <&qos_jpeg_enc0>,
+					 <&qos_jpeg_enc1>,
+					 <&qos_jpeg_enc2>,
+					 <&qos_jpeg_enc3>,
+					 <&qos_rga2_mro>,
+					 <&qos_rga2_mwo>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+
+				power-domain@RK3588_PD_AV1 {
+					reg = <RK3588_PD_AV1>;
+					clocks = <&cru PCLK_AV1>,
+						 <&cru ACLK_AV1>,
+						 <&cru HCLK_VDPU_ROOT>;
+					pm_qos = <&qos_av1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_RKVDEC0 {
+					reg = <RK3588_PD_RKVDEC0>;
+					clocks = <&cru HCLK_RKVDEC0>,
+						 <&cru HCLK_VDPU_ROOT>,
+						 <&cru ACLK_VDPU_ROOT>,
+						 <&cru ACLK_RKVDEC0>;
+					pm_qos = <&qos_rkvdec0>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_RKVDEC1 {
+					reg = <RK3588_PD_RKVDEC1>;
+					clocks = <&cru HCLK_RKVDEC1>,
+						 <&cru HCLK_VDPU_ROOT>,
+						 <&cru ACLK_VDPU_ROOT>;
+					pm_qos = <&qos_rkvdec1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_RGA30 {
+					reg = <RK3588_PD_RGA30>;
+					clocks = <&cru ACLK_RGA3_0>,
+						 <&cru HCLK_RGA3_0>;
+					pm_qos = <&qos_rga3_0>;
+					#power-domain-cells = <0>;
+				};
+			};
+			power-domain@RK3588_PD_VOP {
+				reg = <RK3588_PD_VOP>;
+				clocks = <&cru PCLK_VOP_ROOT>,
+					 <&cru HCLK_VOP_ROOT>,
+					 <&cru ACLK_VOP>;
+				pm_qos = <&qos_vop_m0>,
+					 <&qos_vop_m1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				power-domain@RK3588_PD_VO0 {
+					reg = <RK3588_PD_VO0>;
+					clocks = <&cru PCLK_VO0_ROOT>,
+						 <&cru PCLK_VO0_S_ROOT>,
+						 <&cru HCLK_VO0_S_ROOT>,
+						 <&cru ACLK_VO0_ROOT>,
+						 <&cru HCLK_HDCP0>,
+						 <&cru ACLK_HDCP0>,
+						 <&cru HCLK_VOP_ROOT>;
+					pm_qos = <&qos_hdcp0>;
+					#power-domain-cells = <0>;
+				};
+			};
+			power-domain@RK3588_PD_VO1 {
+				reg = <RK3588_PD_VO1>;
+				clocks = <&cru PCLK_VO1_ROOT>,
+					 <&cru PCLK_VO1_S_ROOT>,
+					 <&cru HCLK_VO1_S_ROOT>,
+					 <&cru HCLK_HDCP1>,
+					 <&cru ACLK_HDCP1>,
+					 <&cru ACLK_HDMIRX_ROOT>,
+					 <&cru HCLK_VO1USB_TOP_ROOT>;
+				pm_qos = <&qos_hdcp1>,
+					 <&qos_hdmirx>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_VI {
+				reg = <RK3588_PD_VI>;
+				clocks = <&cru HCLK_VI_ROOT>,
+					 <&cru PCLK_VI_ROOT>,
+					 <&cru HCLK_ISP0>,
+					 <&cru ACLK_ISP0>,
+					 <&cru HCLK_VICAP>,
+					 <&cru ACLK_VICAP>;
+				pm_qos = <&qos_isp0_mro>,
+					 <&qos_isp0_mwo>,
+					 <&qos_vicap_m0>,
+					 <&qos_vicap_m1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				power-domain@RK3588_PD_ISP1 {
+					reg = <RK3588_PD_ISP1>;
+					clocks = <&cru HCLK_ISP1>,
+						 <&cru ACLK_ISP1>,
+						 <&cru HCLK_VI_ROOT>,
+						 <&cru PCLK_VI_ROOT>;
+					pm_qos = <&qos_isp1_mwo>,
+						 <&qos_isp1_mro>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_FEC {
+					reg = <RK3588_PD_FEC>;
+					clocks = <&cru HCLK_FISHEYE0>,
+						 <&cru ACLK_FISHEYE0>,
+						 <&cru HCLK_FISHEYE1>,
+						 <&cru ACLK_FISHEYE1>,
+						 <&cru PCLK_VI_ROOT>;
+					pm_qos = <&qos_fisheye0>,
+						 <&qos_fisheye1>;
+					#power-domain-cells = <0>;
+				};
+			};
+			power-domain@RK3588_PD_RGA31 {
+				reg = <RK3588_PD_RGA31>;
+				clocks = <&cru HCLK_RGA3_1>,
+					 <&cru ACLK_RGA3_1>;
+				pm_qos = <&qos_rga3_1>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_USB {
+				reg = <RK3588_PD_USB>;
+				clocks = <&cru PCLK_PHP_ROOT>,
+					 <&cru ACLK_USB_ROOT>,
+					 <&cru ACLK_USB>,
+					 <&cru HCLK_USB_ROOT>,
+					 <&cru HCLK_HOST0>,
+					 <&cru HCLK_HOST_ARB0>,
+					 <&cru HCLK_HOST1>,
+					 <&cru HCLK_HOST_ARB1>;
+				pm_qos = <&qos_usb3_0>,
+					 <&qos_usb3_1>,
+					 <&qos_usb2host_0>,
+					 <&qos_usb2host_1>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_GMAC {
+				reg = <RK3588_PD_GMAC>;
+				clocks = <&cru PCLK_PHP_ROOT>,
+					 <&cru ACLK_PCIE_ROOT>,
+					 <&cru ACLK_PHP_ROOT>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_PCIE {
+				reg = <RK3588_PD_PCIE>;
+				clocks = <&cru PCLK_PHP_ROOT>,
+					 <&cru ACLK_PCIE_ROOT>,
+					 <&cru ACLK_PHP_ROOT>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_SDIO {
+				reg = <RK3588_PD_SDIO>;
+				clocks = <&cru HCLK_SDIO>,
+					 <&cru HCLK_NVM_ROOT>;
+				pm_qos = <&qos_sdio>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_AUDIO {
+				reg = <RK3588_PD_AUDIO>;
+				clocks = <&cru HCLK_AUDIO_ROOT>,
+					 <&cru PCLK_AUDIO_ROOT>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_SDMMC {
+				reg = <RK3588_PD_SDMMC>;
+				pm_qos = <&qos_sdmmc>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	i2s4_8ch: i2s@fddc0000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddc0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 0>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_M_I2S4_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s5_8ch: i2s@fddf0000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddf0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 2>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S5_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s9_8ch: i2s@fddfc000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddfc000 0x0 0x1000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 23>;
+		dma-names = "rx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S9_8CH_RX>;
+		reset-names = "rx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	qos_gpu_m0: qos@fdf35000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf35000 0x0 0x20>;
+	};
+
+	qos_gpu_m1: qos@fdf35200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf35200 0x0 0x20>;
+	};
+
+	qos_gpu_m2: qos@fdf35400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf35400 0x0 0x20>;
+	};
+
+	qos_gpu_m3: qos@fdf35600 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf35600 0x0 0x20>;
+	};
+
+	qos_rga3_1: qos@fdf36000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf36000 0x0 0x20>;
+	};
+
+	qos_sdio: qos@fdf39000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf39000 0x0 0x20>;
+	};
+
+	qos_sdmmc: qos@fdf3d800 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3d800 0x0 0x20>;
+	};
+
+	qos_usb3_1: qos@fdf3e000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3e000 0x0 0x20>;
+	};
+
+	qos_usb3_0: qos@fdf3e200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3e200 0x0 0x20>;
+	};
+
+	qos_usb2host_0: qos@fdf3e400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3e400 0x0 0x20>;
+	};
+
+	qos_usb2host_1: qos@fdf3e600 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3e600 0x0 0x20>;
+	};
+
+	qos_fisheye0: qos@fdf40000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40000 0x0 0x20>;
+	};
+
+	qos_fisheye1: qos@fdf40200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40200 0x0 0x20>;
+	};
+
+	qos_isp0_mro: qos@fdf40400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40400 0x0 0x20>;
+	};
+
+	qos_isp0_mwo: qos@fdf40500 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40500 0x0 0x20>;
+	};
+
+	qos_vicap_m0: qos@fdf40600 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40600 0x0 0x20>;
+	};
+
+	qos_vicap_m1: qos@fdf40800 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40800 0x0 0x20>;
+	};
+
+	qos_isp1_mwo: qos@fdf41000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf41000 0x0 0x20>;
+	};
+
+	qos_isp1_mro: qos@fdf41100 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf41100 0x0 0x20>;
+	};
+
+	qos_rkvenc0_m0ro: qos@fdf60000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf60000 0x0 0x20>;
+	};
+
+	qos_rkvenc0_m1ro: qos@fdf60200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf60200 0x0 0x20>;
+	};
+
+	qos_rkvenc0_m2wo: qos@fdf60400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf60400 0x0 0x20>;
+	};
+
+	qos_rkvenc1_m0ro: qos@fdf61000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf61000 0x0 0x20>;
+	};
+
+	qos_rkvenc1_m1ro: qos@fdf61200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf61200 0x0 0x20>;
+	};
+
+	qos_rkvenc1_m2wo: qos@fdf61400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf61400 0x0 0x20>;
+	};
+
+	qos_rkvdec0: qos@fdf62000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf62000 0x0 0x20>;
+	};
+
+	qos_rkvdec1: qos@fdf63000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf63000 0x0 0x20>;
+	};
+
+	qos_av1: qos@fdf64000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf64000 0x0 0x20>;
+	};
+
+	qos_iep: qos@fdf66000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66000 0x0 0x20>;
+	};
+
+	qos_jpeg_dec: qos@fdf66200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66200 0x0 0x20>;
+	};
+
+	qos_jpeg_enc0: qos@fdf66400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66400 0x0 0x20>;
+	};
+
+	qos_jpeg_enc1: qos@fdf66600 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66600 0x0 0x20>;
+	};
+
+	qos_jpeg_enc2: qos@fdf66800 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66800 0x0 0x20>;
+	};
+
+	qos_jpeg_enc3: qos@fdf66a00 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66a00 0x0 0x20>;
+	};
+
+	qos_rga2_mro: qos@fdf66c00 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66c00 0x0 0x20>;
+	};
+
+	qos_rga2_mwo: qos@fdf66e00 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66e00 0x0 0x20>;
+	};
+
+	qos_rga3_0: qos@fdf67000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf67000 0x0 0x20>;
+	};
+
+	qos_vdpu: qos@fdf67200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf67200 0x0 0x20>;
+	};
+
+	qos_npu1: qos@fdf70000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf70000 0x0 0x20>;
+	};
+
+	qos_npu2: qos@fdf71000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf71000 0x0 0x20>;
+	};
+
+	qos_npu0_mwr: qos@fdf72000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf72000 0x0 0x20>;
+	};
+
+	qos_npu0_mro: qos@fdf72200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf72200 0x0 0x20>;
+	};
+
+	qos_mcu_npu: qos@fdf72400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf72400 0x0 0x20>;
+	};
+
+	qos_hdcp0: qos@fdf80000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf80000 0x0 0x20>;
+	};
+
+	qos_hdcp1: qos@fdf81000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf81000 0x0 0x20>;
+	};
+
+	qos_hdmirx: qos@fdf81200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf81200 0x0 0x20>;
+	};
+
+	qos_vop_m0: qos@fdf82000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf82000 0x0 0x20>;
+	};
+
+	qos_vop_m1: qos@fdf82200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf82200 0x0 0x20>;
+	};
+
+	pcie2x1l1: pcie@fe180000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		bus-range = <0x30 0x3f>;
+		clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>,
+			 <&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>,
+			 <&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>,
+				<0 0 0 2 &pcie2x1l1_intc 1>,
+				<0 0 0 3 &pcie2x1l1_intc 2>,
+				<0 0 0 4 &pcie2x1l1_intc 3>;
+		linux,pci-domain = <3>;
+		max-link-speed = <2>;
+		msi-map = <0x3000 &its0 0x3000 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy2_psu PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>;
+		reg = <0xa 0x40c00000 0x0 0x00400000>,
+		      <0x0 0xfe180000 0x0 0x00010000>,
+		      <0x0 0xf3000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>;
+		reset-names = "pwr", "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie2x1l1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	pcie2x1l2: pcie@fe190000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		bus-range = <0x40 0x4f>;
+		clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>,
+			 <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>,
+			 <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>,
+				<0 0 0 2 &pcie2x1l2_intc 1>,
+				<0 0 0 3 &pcie2x1l2_intc 2>,
+				<0 0 0 4 &pcie2x1l2_intc 3>;
+		linux,pci-domain = <4>;
+		max-link-speed = <2>;
+		msi-map = <0x4000 &its0 0x4000 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy0_ps PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>;
+		reg = <0xa 0x41000000 0x0 0x00400000>,
+		      <0x0 0xfe190000 0x0 0x00010000>,
+		      <0x0 0xf4000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>;
+		reset-names = "pwr", "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie2x1l2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	gmac1: ethernet@fe1c0000 {
+		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
+		reg = <0x0 0xfe1c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
+			 <&cru PCLK_GMAC1>, <&cru ACLK_GMAC1>,
+			 <&cru CLK_GMAC1_PTP_REF>;
+		clock-names = "stmmaceth", "clk_mac_ref",
+			      "pclk_mac", "aclk_mac",
+			      "ptp_ref";
+		power-domains = <&power RK3588_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC1>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&sys_grf>;
+		rockchip,php-grf = <&php_grf>;
+		snps,axi-config = <&gmac1_stmmac_axi_setup>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+		snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+		snps,tso;
+		status = "disabled";
+
+		mdio1: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		gmac1_stmmac_axi_setup: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,wr_osr_lmt = <4>;
+			snps,rd_osr_lmt = <8>;
+		};
+
+		gmac1_mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+
+		gmac1_mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+	};
+
+	sata0: sata@fe210000 {
+		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfe210000 0 0x1000>;
+		interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+			 <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+			 <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+		ports-implemented = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		sata-port@0 {
+			reg = <0>;
+			hba-port-cap = <HBA_PORT_FBSCP>;
+			phys = <&combphy0_ps PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			snps,rx-ts-max = <32>;
+			snps,tx-ts-max = <32>;
+		};
+	};
+
+	sata2: sata@fe230000 {
+		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfe230000 0 0x1000>;
+		interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>,
+			 <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>,
+			 <&cru CLK_PIPEPHY2_PIPE_ASIC_G>;
+		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+		ports-implemented = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		sata-port@0 {
+			reg = <0>;
+			hba-port-cap = <HBA_PORT_FBSCP>;
+			phys = <&combphy2_psu PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			snps,rx-ts-max = <32>;
+			snps,tx-ts-max = <32>;
+		};
+	};
+
+	sdmmc: mmc@fe2c0000 {
+		compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe2c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+		power-domains = <&power RK3588_PD_SDMMC>;
+		status = "disabled";
+	};
+
+	sdio: mmc@fe2d0000 {
+		compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x00 0xfe2d0000 0x00 0x4000>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdiom1_pins>;
+		power-domains = <&power RK3588_PD_SDIO>;
+		status = "disabled";
+	};
+
+	sdhci: mmc@fe2e0000 {
+		compatible = "rockchip,rk3588-dwcmshc";
+		reg = <0x0 0xfe2e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>;
+		assigned-clock-rates = <200000000>, <24000000>, <200000000>;
+		clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+			 <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+			 <&cru TMCLK_EMMC>;
+		clock-names = "core", "bus", "axi", "block", "timer";
+		max-frequency = <200000000>;
+		pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>,
+			    <&emmc_cmd>, <&emmc_data_strobe>;
+		pinctrl-names = "default";
+		resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
+			 <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
+			 <&cru SRST_T_EMMC>;
+		reset-names = "core", "bus", "axi", "block", "timer";
+		status = "disabled";
+	};
+
+	i2s0_8ch: i2s@fe470000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfe470000 0x0 0x1000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>;
+		dmas = <&dmac0 0>, <&dmac0 1>;
+		dma-names = "tx", "rx";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_lrck
+			     &i2s0_sclk
+			     &i2s0_sdi0
+			     &i2s0_sdi1
+			     &i2s0_sdi2
+			     &i2s0_sdi3
+			     &i2s0_sdo0
+			     &i2s0_sdo1
+			     &i2s0_sdo2
+			     &i2s0_sdo3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1_8ch: i2s@fe480000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfe480000 0x0 0x1000>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac0 2>, <&dmac0 3>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_lrck
+			     &i2s1m0_sclk
+			     &i2s1m0_sdi0
+			     &i2s1m0_sdi1
+			     &i2s1m0_sdi2
+			     &i2s1m0_sdi3
+			     &i2s1m0_sdo0
+			     &i2s1m0_sdo1
+			     &i2s1m0_sdo2
+			     &i2s1m0_sdo3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2_2ch: i2s@fe490000 {
+		compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xfe490000 0x0 0x1000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac1 0>, <&dmac1 1>;
+		dma-names = "tx", "rx";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2m1_lrck
+			     &i2s2m1_sclk
+			     &i2s2m1_sdi
+			     &i2s2m1_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s3_2ch: i2s@fe4a0000 {
+		compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xfe4a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		assigned-clocks = <&cru CLK_I2S3_2CH_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac1 2>, <&dmac1 3>;
+		dma-names = "tx", "rx";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s3_lrck
+			     &i2s3_sclk
+			     &i2s3_sdi
+			     &i2s3_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@fe600000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0xfe600000 0 0x10000>, /* GICD */
+		      <0x0 0xfe680000 0 0x100000>; /* GICR */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-controller;
+		mbi-alias = <0x0 0xfe610000>;
+		mbi-ranges = <424 56>;
+		msi-controller;
+		ranges;
+		#address-cells = <2>;
+		#interrupt-cells = <4>;
+		#size-cells = <2>;
+
+		its0: msi-controller@fe640000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0xfe640000 0x0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+
+		its1: msi-controller@fe660000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0xfe660000 0x0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+
+		ppi-partitions {
+			ppi_partition0: interrupt-partition-0 {
+				affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+			};
+
+			ppi_partition1: interrupt-partition-1 {
+				affinity = <&cpu_b0 &cpu_b1 &cpu_b2 &cpu_b3>;
+			};
+		};
+	};
+
+	dmac0: dma-controller@fea10000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfea10000 0x0 0x4000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH 0>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC0>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	dmac1: dma-controller@fea30000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfea30000 0x0 0x4000>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH 0>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC1>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	i2c1: i2c@fea90000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfea90000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c1m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@feaa0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfeaa0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c2m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@feab0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfeab0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c3m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@feac0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfeac0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c4m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@fead0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfead0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c5m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	timer0: timer@feae0000 {
+		compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xfeae0000 0x0 0x20>;
+		interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	wdt: watchdog@feaf0000 {
+		compatible = "rockchip,rk3588-wdt", "snps,dw-wdt";
+		reg = <0x0 0xfeaf0000 0x0 0x100>;
+		clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>;
+		clock-names = "tclk", "pclk";
+		interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	spi0: spi@feb00000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfeb00000 0x0 0x1000>;
+		interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 14>, <&dmac0 15>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@feb10000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfeb10000 0x0 0x1000>;
+		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 16>, <&dmac0 17>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi1m1_cs0 &spi1m1_cs1 &spi1m1_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@feb20000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfeb20000 0x0 0x1000>;
+		interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac1 15>, <&dmac1 16>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi2m2_cs0 &spi2m2_cs1 &spi2m2_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi3: spi@feb30000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfeb30000 0x0 0x1000>;
+		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac1 17>, <&dmac1 18>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi3m1_cs0 &spi3m1_cs1 &spi3m1_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart1: serial@feb40000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb40000 0x0 0x100>;
+		interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 8>, <&dmac0 9>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart1m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@feb50000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb50000 0x0 0x100>;
+		interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 10>, <&dmac0 11>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart2m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart3: serial@feb60000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb60000 0x0 0x100>;
+		interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 12>, <&dmac0 13>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart3m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart4: serial@feb70000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb70000 0x0 0x100>;
+		interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac1 9>, <&dmac1 10>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart4m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart5: serial@feb80000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb80000 0x0 0x100>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac1 11>, <&dmac1 12>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart5m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart6: serial@feb90000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb90000 0x0 0x100>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac1 13>, <&dmac1 14>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart6m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart7: serial@feba0000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeba0000 0x0 0x100>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac2 7>, <&dmac2 8>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart7m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart8: serial@febb0000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfebb0000 0x0 0x100>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac2 9>, <&dmac2 10>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart8m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart9: serial@febc0000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfebc0000 0x0 0x100>;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac2 11>, <&dmac2 12>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart9m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@febd0000 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebd0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm4m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@febd0010 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebd0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm5m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@febd0020 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebd0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm6m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@febd0030 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebd0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm7m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm8: pwm@febe0000 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebe0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm8m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm9: pwm@febe0010 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebe0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm9m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm10: pwm@febe0020 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebe0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm10m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm11: pwm@febe0030 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebe0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm11m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm12: pwm@febf0000 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebf0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm12m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm13: pwm@febf0010 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebf0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm13m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm14: pwm@febf0020 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebf0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm14m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm15: pwm@febf0030 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebf0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm15m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	tsadc: tsadc@fec00000 {
+		compatible = "rockchip,rk3588-tsadc";
+		reg = <0x0 0xfec00000 0x0 0x400>;
+		interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		assigned-clocks = <&cru CLK_TSADC>;
+		assigned-clock-rates = <2000000>;
+		resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb", "tsadc";
+		rockchip,hw-tshut-temp = <120000>;
+		rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+		rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+		pinctrl-0 = <&tsadc_gpio_func>;
+		pinctrl-1 = <&tsadc_shut>;
+		pinctrl-names = "gpio", "otpout";
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	saradc: adc@fec10000 {
+		compatible = "rockchip,rk3588-saradc";
+		reg = <0x0 0xfec10000 0x0 0x10000>;
+		interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>;
+		#io-channel-cells = <1>;
+		clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	i2c6: i2c@fec80000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfec80000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c6m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@fec90000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfec90000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c7m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@feca0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfeca0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C8>, <&cru PCLK_I2C8>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c8m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi4: spi@fecb0000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfecb0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI4>, <&cru PCLK_SPI4>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac2 13>, <&dmac2 14>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi4m0_cs0 &spi4m0_cs1 &spi4m0_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	otp: efuse@fecc0000 {
+		compatible = "rockchip,rk3588-otp";
+		reg = <0x0 0xfecc0000 0x0 0x400>;
+		clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>,
+			 <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>;
+		clock-names = "otp", "apb_pclk", "phy", "arb";
+		resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>,
+			 <&cru SRST_OTPC_ARB>;
+		reset-names = "otp", "apb", "arb";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cpu_code: cpu-code@2 {
+			reg = <0x02 0x2>;
+		};
+
+		otp_id: id@7 {
+			reg = <0x07 0x10>;
+		};
+
+		cpub0_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+
+		cpub1_leakage: cpu-leakage@18 {
+			reg = <0x18 0x1>;
+		};
+
+		cpul_leakage: cpu-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+
+		log_leakage: log-leakage@1a {
+			reg = <0x1a 0x1>;
+		};
+
+		gpu_leakage: gpu-leakage@1b {
+			reg = <0x1b 0x1>;
+		};
+
+		otp_cpu_version: cpu-version@1c {
+			reg = <0x1c 0x1>;
+			bits = <3 3>;
+		};
+
+		npu_leakage: npu-leakage@28 {
+			reg = <0x28 0x1>;
+		};
+
+		codec_leakage: codec-leakage@29 {
+			reg = <0x29 0x1>;
+		};
+	};
+
+	dmac2: dma-controller@fed10000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfed10000 0x0 0x4000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH 0>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC2>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	combphy0_ps: phy@fee00000 {
+		compatible = "rockchip,rk3588-naneng-combphy";
+		reg = <0x0 0xfee00000 0x0 0x100>;
+		clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>,
+			 <&cru PCLK_PHP_ROOT>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&cru CLK_REF_PIPE_PHY0>;
+		assigned-clock-rates = <100000000>;
+		#phy-cells = <1>;
+		resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>;
+		reset-names = "phy", "apb";
+		rockchip,pipe-grf = <&php_grf>;
+		rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
+		status = "disabled";
+	};
+
+	combphy2_psu: phy@fee20000 {
+		compatible = "rockchip,rk3588-naneng-combphy";
+		reg = <0x0 0xfee20000 0x0 0x100>;
+		clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>,
+			 <&cru PCLK_PHP_ROOT>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&cru CLK_REF_PIPE_PHY2>;
+		assigned-clock-rates = <100000000>;
+		#phy-cells = <1>;
+		resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>;
+		reset-names = "phy", "apb";
+		rockchip,pipe-grf = <&php_grf>;
+		rockchip,pipe-phy-grf = <&pipe_phy2_grf>;
+		status = "disabled";
+	};
+
+	system_sram2: sram@ff001000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0xff001000 0x0 0xef000>;
+		ranges = <0x0 0x0 0xff001000 0xef000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3588-pinctrl";
+		ranges;
+		rockchip,grf = <&ioc>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gpio0: gpio@fd8a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfd8a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@fec20000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec20000 0x0 0x100>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@fec30000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec30000 0x0 0x100>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@fec40000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec40000 0x0 0x100>;
+			interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@fec50000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec50000 0x0 0x100>;
+			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+#include "rk3588s-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
new file mode 100644
index 0000000000..5c645437b5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+&pinctrl {
+	/omit-if-no-ref/
+	pcfg_pull_up: pcfg-pull-up {
+		bias-pull-up;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down: pcfg-pull-down {
+		bias-pull-down;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none: pcfg-pull-none {
+		bias-disable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_0: pcfg-pull-none-drv-level-0 {
+		bias-disable;
+		drive-strength = <0>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_1: pcfg-pull-none-drv-level-1 {
+		bias-disable;
+		drive-strength = <1>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_2: pcfg-pull-none-drv-level-2 {
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_3: pcfg-pull-none-drv-level-3 {
+		bias-disable;
+		drive-strength = <3>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_4: pcfg-pull-none-drv-level-4 {
+		bias-disable;
+		drive-strength = <4>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_5: pcfg-pull-none-drv-level-5 {
+		bias-disable;
+		drive-strength = <5>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_6: pcfg-pull-none-drv-level-6 {
+		bias-disable;
+		drive-strength = <6>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_7: pcfg-pull-none-drv-level-7 {
+		bias-disable;
+		drive-strength = <7>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_8: pcfg-pull-none-drv-level-8 {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_9: pcfg-pull-none-drv-level-9 {
+		bias-disable;
+		drive-strength = <9>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_10: pcfg-pull-none-drv-level-10 {
+		bias-disable;
+		drive-strength = <10>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_11: pcfg-pull-none-drv-level-11 {
+		bias-disable;
+		drive-strength = <11>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_12: pcfg-pull-none-drv-level-12 {
+		bias-disable;
+		drive-strength = <12>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_13: pcfg-pull-none-drv-level-13 {
+		bias-disable;
+		drive-strength = <13>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_14: pcfg-pull-none-drv-level-14 {
+		bias-disable;
+		drive-strength = <14>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_15: pcfg-pull-none-drv-level-15 {
+		bias-disable;
+		drive-strength = <15>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_0: pcfg-pull-up-drv-level-0 {
+		bias-pull-up;
+		drive-strength = <0>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_1: pcfg-pull-up-drv-level-1 {
+		bias-pull-up;
+		drive-strength = <1>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_2: pcfg-pull-up-drv-level-2 {
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_3: pcfg-pull-up-drv-level-3 {
+		bias-pull-up;
+		drive-strength = <3>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_4: pcfg-pull-up-drv-level-4 {
+		bias-pull-up;
+		drive-strength = <4>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_5: pcfg-pull-up-drv-level-5 {
+		bias-pull-up;
+		drive-strength = <5>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_6: pcfg-pull-up-drv-level-6 {
+		bias-pull-up;
+		drive-strength = <6>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_7: pcfg-pull-up-drv-level-7 {
+		bias-pull-up;
+		drive-strength = <7>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_8: pcfg-pull-up-drv-level-8 {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_9: pcfg-pull-up-drv-level-9 {
+		bias-pull-up;
+		drive-strength = <9>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_10: pcfg-pull-up-drv-level-10 {
+		bias-pull-up;
+		drive-strength = <10>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_11: pcfg-pull-up-drv-level-11 {
+		bias-pull-up;
+		drive-strength = <11>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_12: pcfg-pull-up-drv-level-12 {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_13: pcfg-pull-up-drv-level-13 {
+		bias-pull-up;
+		drive-strength = <13>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_14: pcfg-pull-up-drv-level-14 {
+		bias-pull-up;
+		drive-strength = <14>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_15: pcfg-pull-up-drv-level-15 {
+		bias-pull-up;
+		drive-strength = <15>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_0: pcfg-pull-down-drv-level-0 {
+		bias-pull-down;
+		drive-strength = <0>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_1: pcfg-pull-down-drv-level-1 {
+		bias-pull-down;
+		drive-strength = <1>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_2: pcfg-pull-down-drv-level-2 {
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_3: pcfg-pull-down-drv-level-3 {
+		bias-pull-down;
+		drive-strength = <3>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_4: pcfg-pull-down-drv-level-4 {
+		bias-pull-down;
+		drive-strength = <4>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_5: pcfg-pull-down-drv-level-5 {
+		bias-pull-down;
+		drive-strength = <5>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_6: pcfg-pull-down-drv-level-6 {
+		bias-pull-down;
+		drive-strength = <6>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_7: pcfg-pull-down-drv-level-7 {
+		bias-pull-down;
+		drive-strength = <7>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_8: pcfg-pull-down-drv-level-8 {
+		bias-pull-down;
+		drive-strength = <8>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_9: pcfg-pull-down-drv-level-9 {
+		bias-pull-down;
+		drive-strength = <9>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_10: pcfg-pull-down-drv-level-10 {
+		bias-pull-down;
+		drive-strength = <10>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_11: pcfg-pull-down-drv-level-11 {
+		bias-pull-down;
+		drive-strength = <11>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_12: pcfg-pull-down-drv-level-12 {
+		bias-pull-down;
+		drive-strength = <12>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_13: pcfg-pull-down-drv-level-13 {
+		bias-pull-down;
+		drive-strength = <13>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_14: pcfg-pull-down-drv-level-14 {
+		bias-pull-down;
+		drive-strength = <14>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_15: pcfg-pull-down-drv-level-15 {
+		bias-pull-down;
+		drive-strength = <15>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_smt: pcfg-pull-up-smt {
+		bias-pull-up;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_smt: pcfg-pull-down-smt {
+		bias-pull-down;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_smt: pcfg-pull-none-smt {
+		bias-disable;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_0_smt: pcfg-pull-none-drv-level-0-smt {
+		bias-disable;
+		drive-strength = <0>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	/omit-if-no-ref/
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
new file mode 100644
index 0000000000..33989a9643
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ld11-global.dtb \
+	uniphier-ld11-ref.dtb \
+	uniphier-ld20-akebi96.dtb \
+	uniphier-ld20-global.dtb \
+	uniphier-ld20-ref.dtb \
+	uniphier-pxs3-ref.dtb \
+	uniphier-pxs3-ref-gadget0.dtb \
+	uniphier-pxs3-ref-gadget1.dtb
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
new file mode 100644
index 0000000000..da44a15a8a
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD11 Global Board
+//
+// Copyright (C) 2016-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+//           Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include "uniphier-ld11.dtsi"
+
+/ {
+	model = "UniPhier LD11 Global Board (REF_LD11_GP)";
+	compatible = "socionext,uniphier-ld11-global",
+		     "socionext,uniphier-ld11";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	dvdd_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "DVDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp_vcc_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "AMP_VCC";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier LD11";
+		widgets = "Headphone", "Headphones";
+		dais = <&i2s_port2
+			&i2s_port3
+			&i2s_port4
+			&spdif_port0
+			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2s_hpcmout1 {
+	dai-format = "i2s";
+	remote-endpoint = <&tas_speaker>;
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tas5707a@1d {
+		compatible = "ti,tas5711";
+		reg = <0x1d>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>;
+		pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&dvdd_reg>;
+		DVDD-supply = <&dvdd_reg>;
+		PVDD_A-supply = <&amp_vcc_reg>;
+		PVDD_B-supply = <&amp_vcc_reg>;
+		PVDD_C-supply = <&amp_vcc_reg>;
+		PVDD_D-supply = <&amp_vcc_reg>;
+
+		port@0 {
+			tas_speaker: endpoint {
+				dai-format = "i2s";
+				remote-endpoint = <&i2s_hpcmout1>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
new file mode 100644
index 0000000000..414aeb99e6
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD11 Reference Board
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld11.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD11 Reference Board";
+	compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&gpio {
+	xirq0-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
new file mode 100644
index 0000000000..7bb36b0714
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -0,0 +1,671 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD11 SoC
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "socionext,uniphier-ld11";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	cluster0_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-245000000 {
+			opp-hz = /bits/ 64 <245000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-490000000 {
+			opp-hz = /bits/ 64 <490000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-653334000 {
+			opp-hz = /bits/ 64 <653334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-980000000 {
+			opp-hz = /bits/ 64 <980000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-memory@81000000 {
+			reg = <0x0 0x81000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 43 0 0>,
+				      <&pinctrl 51 0 0>,
+				      <&pinctrl 96 0 0>,
+				      <&pinctrl 160 0 0>,
+				      <&pinctrl 184 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2",
+						  "gpio_range3",
+						  "gpio_range4",
+						  "gpio_range5";
+			ngpios = <200>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		audio@56000000 {
+			compatible = "socionext,uniphier-ld11-aio";
+			reg = <0x56000000 0x80000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aout1>,
+				    <&pinctrl_aoutiec1>;
+			clock-names = "aio";
+			clocks = <&sys_clk 40>;
+			reset-names = "aio";
+			resets = <&sys_rst 40>;
+			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
+
+			i2s_port0: port@0 {
+				i2s_hdmi: endpoint {
+				};
+			};
+
+			i2s_port1: port@1 {
+				i2s_pcmin2: endpoint {
+				};
+			};
+
+			i2s_port2: port@2 {
+				i2s_line: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_line>;
+				};
+			};
+
+			i2s_port3: port@3 {
+				i2s_hpcmout1: endpoint {
+				};
+			};
+
+			i2s_port4: port@4 {
+				i2s_hp: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_hp>;
+				};
+			};
+
+			spdif_port0: port@5 {
+				spdif_hiecout1: endpoint {
+				};
+			};
+
+			src_port0: port@6 {
+				i2s_epcmout2: endpoint {
+				};
+			};
+
+			src_port1: port@7 {
+				i2s_epcmout3: endpoint {
+				};
+			};
+
+			comp_spdif_port0: port@8 {
+				comp_spdif_hiecout1: endpoint {
+				};
+			};
+		};
+
+		codec@57900000 {
+			compatible = "socionext,uniphier-evea";
+			reg = <0x57900000 0x1000>;
+			clock-names = "evea", "exiv";
+			clocks = <&sys_clk 41>, <&sys_clk 42>;
+			reset-names = "evea", "exiv", "adamv";
+			resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
+			#sound-dai-cells = <1>;
+
+			port@0 {
+				evea_line: endpoint {
+					remote-endpoint = <&i2s_line>;
+				};
+			};
+
+			port@1 {
+				evea_hp: endpoint {
+					remote-endpoint = <&i2s_hp>;
+				};
+			};
+		};
+
+		syscon@57920000 {
+			compatible = "socionext,uniphier-ld11-adamv",
+				     "simple-mfd", "syscon";
+			reg = <0x57920000 0x1000>;
+
+			adamv_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-adamv-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		syscon@59810000 {
+			compatible = "socionext,uniphier-ld11-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		syscon@59820000 {
+			compatible = "socionext,uniphier-ld11-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock-controller {
+				compatible = "socionext,uniphier-ld11-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
+			cdns,phy-input-delay-legacy = <9>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
+			has-transaction-translator;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
+			has-transaction-translator;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+				 <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+			phy-names = "usb";
+			phys = <&usb_phy2>;
+			has-transaction-translator;
+		};
+
+		syscon@5b3e0000 {
+			compatible = "socionext,uniphier-ld11-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x5b3e0000 0x800>;
+
+			mio_clk: clock-controller {
+				compatible = "socionext,uniphier-ld11-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-mio-reset";
+				#reset-cells = <1>;
+				resets = <&sys_rst 7>;
+			};
+		};
+
+		soc_glue: syscon@5f800000 {
+			compatible = "socionext,uniphier-ld11-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld11-pinctrl";
+			};
+
+			usb-hub {
+				compatible = "socionext,uniphier-ld11-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		syscon@5f900000 {
+			compatible = "socionext,uniphier-ld11-soc-glue-debug",
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-ld11-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe40000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon@61840000 {
+			compatible = "socionext,uniphier-ld11-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock-controller {
+				compatible = "socionext,uniphier-ld11-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-ld11-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "internal";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
+
+&pinctrl_aoutiec1 {
+	drive-strength = <4>;	/* default: 4mA */
+
+	ao1arc {
+		pins = "AO1ARC";
+		drive-strength = <8>;	/* 8mA */
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
new file mode 100644
index 0000000000..fba454adae
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for Akebi96 Development Board
+//
+// Derived from uniphier-ld20-global.dts.
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+// Copyright (C) 2019-2020 Linaro Ltd.
+
+/dts-v1/;
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include "uniphier-ld20.dtsi"
+
+/ {
+	model = "Akebi96";
+	compatible = "socionext,uniphier-ld20-akebi96",
+		     "socionext,uniphier-ld20";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+
+	framebuffer@c0000000 {
+		compatible = "simple-framebuffer";
+		reg = <0 0xc0000000 0 0x02000000>;
+		width = <1920>;
+		height = <1080>;
+		stride = <7680>;
+		format = "a8r8g8b8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		memory@c0000000 {
+			reg = <0 0xc0000000 0 0x02000000>;
+			no-map;
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier LD20";
+		dais = <&spdif_port0
+			&comp_spdif_port0>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&spi3 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	usb-over-spi@0 {
+		compatible = "maxim,max3421-udc";
+		reg = <0>;
+		spi-max-frequency = <12500000>;
+		interrupt-parent = <&gpio>;
+		interrupt-names = "udc";
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&serial0 {
+	/* Onboard USB-UART */
+	status = "okay";
+};
+
+&serial2 {
+	/* LS connector UART1 */
+	status = "okay";
+};
+
+&serial3 {
+	/* LS connector UART0 */
+	status = "okay";
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	/* LS connector I2C0 */
+	status = "okay";
+};
+
+&i2c1 {
+	/* LS connector I2C1 */
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&gpio {
+	/* IRQs for Max3421 */
+	xirq0-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 1>;
+		input;
+	};
+	xirq10-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(10) 1>;
+		input;
+	};
+};
+
+&pinctrl_aout1 {
+	groups = "aout1b";
+};
+
+&pinctrl_uart3 {
+	groups = "uart3", "uart3_ctsrts";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
new file mode 100644
index 0000000000..a01579cb3b
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 Global Board
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+//           Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include "uniphier-ld20.dtsi"
+
+/ {
+	model = "UniPhier LD20 Global Board (REF_LD20_GP)";
+	compatible = "socionext,uniphier-ld20-global",
+		     "socionext,uniphier-ld20";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+
+	dvdd_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "DVDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp_vcc_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "AMP_VCC";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier LD20";
+		widgets = "Headphone", "Headphones";
+		dais = <&i2s_port2
+			&i2s_port3
+			&i2s_port4
+			&spdif_port0
+			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2s_hpcmout1 {
+	dai-format = "i2s";
+	remote-endpoint = <&tas_speaker>;
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tas5707@1b {
+		compatible = "ti,tas5711";
+		reg = <0x1b>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>;
+		pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&dvdd_reg>;
+		DVDD-supply = <&dvdd_reg>;
+		PVDD_A-supply = <&amp_vcc_reg>;
+		PVDD_B-supply = <&amp_vcc_reg>;
+		PVDD_C-supply = <&amp_vcc_reg>;
+		PVDD_D-supply = <&amp_vcc_reg>;
+
+		port@0 {
+			tas_speaker: endpoint {
+				dai-format = "i2s";
+				remote-endpoint = <&i2s_hpcmout1>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_ether_rmii>;
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
new file mode 100644
index 0000000000..a5f2083f8b
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld20.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD20 Reference Board";
+	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&gpio {
+	xirq0-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl_ether_rgmii {
+	tx {
+		pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+		       "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+		drive-strength = <9>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
new file mode 100644
index 0000000000..4e21716302
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -0,0 +1,999 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "socionext,uniphier-ld20";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&a72_l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&a72_l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x100>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&a53_l2>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x101>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&a53_l2>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		a72_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		a53_l2: l2-cache1 {
+			compatible = "cache";
+		};
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-memory@81000000 {
+			reg = <0x0 0x81000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		spi2: spi@54006200 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006200 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi2>;
+			clocks = <&peri_clk 13>;
+			resets = <&peri_rst 13>;
+		};
+
+		spi3: spi@54006300 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006300 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi3>;
+			clocks = <&peri_clk 14>;
+			resets = <&peri_rst 14>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 96 0 0>,
+				      <&pinctrl 160 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <205>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		audio@56000000 {
+			compatible = "socionext,uniphier-ld20-aio";
+			reg = <0x56000000 0x80000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aout1>,
+				    <&pinctrl_aoutiec1>;
+			clock-names = "aio";
+			clocks = <&sys_clk 40>;
+			reset-names = "aio";
+			resets = <&sys_rst 40>;
+			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
+
+			i2s_port0: port@0 {
+				i2s_hdmi: endpoint {
+				};
+			};
+
+			i2s_port1: port@1 {
+				i2s_pcmin2: endpoint {
+				};
+			};
+
+			i2s_port2: port@2 {
+				i2s_line: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_line>;
+				};
+			};
+
+			i2s_port3: port@3 {
+				i2s_hpcmout1: endpoint {
+				};
+			};
+
+			i2s_port4: port@4 {
+				i2s_hp: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_hp>;
+				};
+			};
+
+			spdif_port0: port@5 {
+				spdif_hiecout1: endpoint {
+				};
+			};
+
+			src_port0: port@6 {
+				i2s_epcmout2: endpoint {
+				};
+			};
+
+			src_port1: port@7 {
+				i2s_epcmout3: endpoint {
+				};
+			};
+
+			comp_spdif_port0: port@8 {
+				comp_spdif_hiecout1: endpoint {
+				};
+			};
+		};
+
+		codec@57900000 {
+			compatible = "socionext,uniphier-evea";
+			reg = <0x57900000 0x1000>;
+			clock-names = "evea", "exiv";
+			clocks = <&sys_clk 41>, <&sys_clk 42>;
+			reset-names = "evea", "exiv", "adamv";
+			resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
+			#sound-dai-cells = <1>;
+
+			port@0 {
+				evea_line: endpoint {
+					remote-endpoint = <&i2s_line>;
+				};
+			};
+
+			port@1 {
+				evea_hp: endpoint {
+					remote-endpoint = <&i2s_hp>;
+				};
+			};
+		};
+
+		syscon@57920000 {
+			compatible = "socionext,uniphier-ld20-adamv",
+				     "simple-mfd", "syscon";
+			reg = <0x57920000 0x1000>;
+
+			adamv_rst: reset-controller {
+				compatible = "socionext,uniphier-ld20-adamv-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl: syscon@59810000 {
+			compatible = "socionext,uniphier-ld20-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock-controller {
+				compatible = "socionext,uniphier-ld20-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset-controller {
+				compatible = "socionext,uniphier-ld20-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		syscon@59820000 {
+			compatible = "socionext,uniphier-ld20-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock-controller {
+				compatible = "socionext,uniphier-ld20-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset-controller {
+				compatible = "socionext,uniphier-ld20-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
+			cdns,phy-input-delay-legacy = <9>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			socionext,syscon-uhs-mode = <&sdctrl 0>;
+		};
+
+		soc_glue: syscon@5f800000 {
+			compatible = "socionext,uniphier-ld20-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld20-pinctrl";
+			};
+		};
+
+		syscon@5f900000 {
+			compatible = "socionext,uniphier-ld20-soc-glue-debug",
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* USB cells */
+				usb_rterm0: trim@54,4 {
+					reg = <0x54 1>;
+					bits = <4 2>;
+				};
+				usb_rterm1: trim@55,4 {
+					reg = <0x55 1>;
+					bits = <4 2>;
+				};
+				usb_rterm2: trim@58,4 {
+					reg = <0x58 1>;
+					bits = <4 2>;
+				};
+				usb_rterm3: trim@59,4 {
+					reg = <0x59 1>;
+					bits = <4 2>;
+				};
+				usb_sel_t0: trim@54,0 {
+					reg = <0x54 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t1: trim@55,0 {
+					reg = <0x55 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t2: trim@58,0 {
+					reg = <0x58 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t3: trim@59,0 {
+					reg = <0x59 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i0: trim@56,0 {
+					reg = <0x56 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i2: trim@5a,0 {
+					reg = <0x5a 1>;
+					bits = <0 4>;
+				};
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-ld20-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon@61840000 {
+			compatible = "socionext,uniphier-ld20-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock-controller {
+				compatible = "socionext,uniphier-ld20-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset-controller {
+				compatible = "socionext,uniphier-ld20-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+
+			pvtctl: thermal-sensor {
+				compatible = "socionext,uniphier-ld20-thermal";
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-ld20-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "rgmii-id";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		usb: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+				    <&pinctrl_usb2>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb_rst 15>;
+			phys = <&usb_hsphy0>, <&usb_hsphy1>,
+			       <&usb_hsphy2>, <&usb_hsphy3>,
+			       <&usb_ssphy0>, <&usb_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65b00000 {
+			compatible = "socionext,uniphier-ld20-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65b00000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-ld20-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus2: regulator@120 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x120 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus3: regulator@130 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x130 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_hsphy0: phy@200 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+					      <&usb_hs_i0>;
+			};
+
+			usb_hsphy1: phy@210 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+					      <&usb_hs_i0>;
+			};
+
+			usb_hsphy2: phy@220 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x220 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb_vbus2>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+					      <&usb_hs_i2>;
+			};
+
+			usb_hsphy3: phy@230 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x230 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb_vbus3>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+					      <&usb_hs_i2>;
+			};
+
+			usb_ssphy0: phy@300 {
+				compatible = "socionext,uniphier-ld20-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb_vbus0>;
+			};
+
+			usb_ssphy1: phy@310 {
+				compatible = "socionext,uniphier-ld20-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 19>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 19>;
+				vbus-supply = <&usb_vbus1>;
+			};
+		};
+
+		pcie: pcie@66000000 {
+			compatible = "socionext,uniphier-pcie";
+			status = "disabled";
+			reg-names = "dbi", "link", "config";
+			reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
+			      <0x2fff0000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			clocks = <&sys_clk 24>;
+			resets = <&sys_rst 24>;
+			num-lanes = <1>;
+			num-viewport = <1>;
+			bus-range = <0x0 0xff>;
+			device_type = "pci";
+			ranges =
+			/* downstream I/O */
+				<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
+			/* non-prefetchable memory */
+				<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
+			#interrupt-cells = <1>;
+			interrupt-names = "dma", "msi";
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,	/* INTA */
+					<0 0 0 2 &pcie_intc 1>,	/* INTB */
+					<0 0 0 3 &pcie_intc 2>,	/* INTC */
+					<0 0 0 4 &pcie_intc 3>;	/* INTD */
+			phy-names = "pcie-phy";
+			phys = <&pcie_phy>;
+
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie_phy: phy@66038000 {
+			compatible = "socionext,uniphier-ld20-pcie-phy";
+			reg = <0x66038000 0x4000>;
+			#phy-cells = <0>;
+			clock-names = "link";
+			clocks = <&sys_clk 24>;
+			reset-names = "link";
+			resets = <&sys_rst 24>;
+			socionext,syscon = <&soc_glue>;
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
+
+&pinctrl_aout1 {
+	drive-strength = <4>;	/* default: 3.5mA */
+
+	ao1dacck {
+		pins = "AO1DACCK";
+		drive-strength = <5>;	/* 5mA */
+	};
+};
+
+&pinctrl_aoutiec1 {
+	drive-strength = <4>;	/* default: 3.5mA */
+
+	ao1arc {
+		pins = "AO1ARC";
+		drive-strength = <11>;	/* 11mA */
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
new file mode 100644
index 0000000000..3e1132204c
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
@@ -0,0 +1 @@
+#include <arm/socionext/uniphier-pinctrl.dtsi>
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
new file mode 100644
index 0000000000..99136adb18
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #0)
+//
+// Copyright (C) 2021 Socionext Inc.
+//   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3-ref.dts"
+
+/ {
+	model = "UniPhier PXs3 Reference Board (USB-Device #0)";
+};
+
+/* I2C3 pinctrl is shared with USB*VBUSIN */
+&i2c3 {
+	status = "disabled";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	pinctrl-0 = <&pinctrl_usb0_device>;
+	snps,dis_enblslpm_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,usb2-gadget-lpm-disable;
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+};
+
+&usb0_hsphy0 {
+	/delete-property/ vbus-supply;
+};
+
+&usb0_ssphy0 {
+	/delete-property/ vbus-supply;
+};
+
+/delete-node/ &usb0_hsphy1;
+/delete-node/ &usb0_ssphy1;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
new file mode 100644
index 0000000000..4c960f4554
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #1)
+//
+// Copyright (C) 2021 Socionext Inc.
+//   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3-ref.dts"
+
+/ {
+	model = "UniPhier PXs3 Reference Board (USB-Device #1)";
+};
+
+/* I2C3 pinctrl is shared with USB*VBUSIN */
+&i2c3 {
+	status = "disabled";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "peripheral";
+	pinctrl-0 = <&pinctrl_usb1_device>;
+	snps,dis_enblslpm_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,usb2-gadget-lpm-disable;
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb1_hsphy0>, <&usb1_ssphy0>;
+};
+
+&usb1_hsphy0 {
+	/delete-property/ vbus-supply;
+};
+
+&usb1_ssphy0 {
+	/delete-property/ vbus-supply;
+};
+
+/delete-node/ &usb1_hsphy1;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
new file mode 100644
index 0000000000..1ced6190ab
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board
+//
+// Copyright (C) 2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PXs3 Reference Board";
+	compatible = "socionext,uniphier-pxs3-ref", "socionext,uniphier-pxs3";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c6 = &i2c6;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xa0000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio {
+	xirq4-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-handle = <&ethphy0>;
+};
+
+&mdio0 {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	phy-handle = <&ethphy1>;
+};
+
+&mdio1 {
+	ethphy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
+
+&pinctrl_ether_rgmii {
+	tx {
+		pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1",
+		       "RGMII0_TXD2", "RGMII0_TXD3", "RGMII0_TXCTL";
+		drive-strength = <9>;
+	};
+};
+
+&pinctrl_ether1_rgmii {
+	tx {
+		pins = "RGMII1_TXCLK", "RGMII1_TXD0", "RGMII1_TXD1",
+		       "RGMII1_TXD2", "RGMII1_TXD3", "RGMII1_TXCTL";
+		drive-strength = <9>;
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
new file mode 100644
index 0000000000..38ccfb46ea
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -0,0 +1,957 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs3 SoC
+//
+// Copyright (C) 2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "socionext,uniphier-pxs3";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x002>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x003>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	cluster0_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-325000000 {
+			opp-hz = /bits/ 64 <325000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-650000000 {
+			opp-hz = /bits/ 64 <650000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-866667000 {
+			opp-hz = /bits/ 64 <866667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-memory@81000000 {
+			reg = <0x0 0x81000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 104 0 0>,
+				      <&pinctrl 168 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <286>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl: syscon@59810000 {
+			compatible = "socionext,uniphier-pxs3-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock-controller {
+				compatible = "socionext,uniphier-pxs3-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset-controller {
+				compatible = "socionext,uniphier-pxs3-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		syscon@59820000 {
+			compatible = "socionext,uniphier-pxs3-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock-controller {
+				compatible = "socionext,uniphier-pxs3-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset-controller {
+				compatible = "socionext,uniphier-pxs3-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
+			cdns,phy-input-delay-legacy = <9>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&sdctrl 0>;
+		};
+
+		soc_glue: syscon@5f800000 {
+			compatible = "socionext,uniphier-pxs3-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pxs3-pinctrl";
+			};
+		};
+
+		syscon@5f900000 {
+			compatible = "socionext,uniphier-pxs3-soc-glue-debug",
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* USB cells */
+				usb_rterm0: trim@54,4 {
+					reg = <0x54 1>;
+					bits = <4 2>;
+				};
+				usb_rterm1: trim@55,4 {
+					reg = <0x55 1>;
+					bits = <4 2>;
+				};
+				usb_rterm2: trim@58,4 {
+					reg = <0x58 1>;
+					bits = <4 2>;
+				};
+				usb_rterm3: trim@59,4 {
+					reg = <0x59 1>;
+					bits = <4 2>;
+				};
+				usb_sel_t0: trim@54,0 {
+					reg = <0x54 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t1: trim@55,0 {
+					reg = <0x55 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t2: trim@58,0 {
+					reg = <0x58 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t3: trim@59,0 {
+					reg = <0x59 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i0: trim@56,0 {
+					reg = <0x56 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i2: trim@5a,0 {
+					reg = <0x5a 1>;
+					bits = <0 4>;
+				};
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pxs3-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon@61840000 {
+			compatible = "socionext,uniphier-pxs3-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock-controller {
+				compatible = "socionext,uniphier-pxs3-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset-controller {
+				compatible = "socionext,uniphier-pxs3-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+
+			pvtctl: thermal-sensor {
+				compatible = "socionext,uniphier-pxs3-thermal";
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
+		};
+
+		eth0: ethernet@65000000 {
+			compatible = "socionext,uniphier-pxs3-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "rgmii-id";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		eth1: ethernet@65200000 {
+			compatible = "socionext,uniphier-pxs3-ave4";
+			status = "disabled";
+			reg = <0x65200000 0x8500>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether1_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 7>;
+			reset-names = "ether";
+			resets = <&sys_rst 7>;
+			phy-mode = "rgmii-id";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 1>;
+
+			mdio1: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ahci0: sata@65600000 {
+			compatible = "socionext,uniphier-pxs3-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65600000 0x10000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 28>;
+			resets = <&sys_rst 28>, <&ahci0_rst 0>;
+			ports-implemented = <1>;
+			phys = <&ahci0_phy>;
+		};
+
+		sata-controller@65700000 {
+			compatible = "socionext,uniphier-pxs3-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65700000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65700000 0x100>;
+
+			ahci0_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs3-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link";
+				resets = <&sys_rst 28>;
+				#reset-cells = <1>;
+			};
+
+			ahci0_phy: sata-phy@10 {
+				compatible = "socionext,uniphier-pxs3-ahci-phy";
+				reg = <0x10 0x10>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 28>, <&sys_clk 30>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 28>, <&sys_rst 30>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ahci1: sata@65800000 {
+			compatible = "socionext,uniphier-pxs3-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65800000 0x10000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 29>;
+			resets = <&sys_rst 29>, <&ahci1_rst 0>;
+			ports-implemented = <1>;
+			phys = <&ahci1_phy>;
+		};
+
+		sata-controller@65900000 {
+			compatible = "socionext,uniphier-pxs3-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65900000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65900000 0x100>;
+
+			ahci1_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs3-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "link";
+				clocks = <&sys_clk 29>;
+				reset-names = "link";
+				resets = <&sys_rst 29>;
+				#reset-cells = <1>;
+			};
+
+			ahci1_phy: sata-phy@10 {
+				compatible = "socionext,uniphier-pxs3-ahci-phy";
+				reg = <0x10 0x10>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 29>, <&sys_clk 30>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 29>, <&sys_rst 30>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65b00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65b00000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs3-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_hsphy0: phy@200 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+					      <&usb_hs_i0>;
+			};
+
+			usb0_hsphy1: phy@210 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+					      <&usb_hs_i0>;
+			};
+
+			usb0_ssphy0: phy@300 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: phy@310 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
+			       <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65d00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65d00000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs3-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_hsphy0: phy@200 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 20>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+					      <&usb_hs_i2>;
+			};
+
+			usb1_hsphy1: phy@210 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 20>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+					      <&usb_hs_i2>;
+			};
+
+			usb1_ssphy0: phy@300 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 21>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		pcie: pcie@66000000 {
+			compatible = "socionext,uniphier-pcie";
+			status = "disabled";
+			reg-names = "dbi", "link", "config";
+			reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
+			      <0x2fff0000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			clocks = <&sys_clk 24>;
+			resets = <&sys_rst 24>;
+			num-lanes = <1>;
+			num-viewport = <1>;
+			bus-range = <0x0 0xff>;
+			device_type = "pci";
+			ranges =
+			/* downstream I/O */
+				<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
+			/* non-prefetchable memory */
+				<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
+			#interrupt-cells = <1>;
+			interrupt-names = "dma", "msi";
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,	/* INTA */
+					<0 0 0 2 &pcie_intc 1>,	/* INTB */
+					<0 0 0 3 &pcie_intc 2>,	/* INTC */
+					<0 0 0 4 &pcie_intc 3>;	/* INTD */
+			phy-names = "pcie-phy";
+			phys = <&pcie_phy>;
+
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie_phy: phy@66038000 {
+			compatible = "socionext,uniphier-pxs3-pcie-phy";
+			reg = <0x66038000 0x4000>;
+			#phy-cells = <0>;
+			clock-names = "link";
+			clocks = <&sys_clk 24>;
+			reset-names = "link";
+			resets = <&sys_rst 24>;
+			socionext,syscon = <&soc_glue>;
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
new file mode 100644
index 0000000000..8afbe5ce45
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
@@ -0,0 +1 @@
+#include <arm/socionext/uniphier-ref-daughter.dtsi>
diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
new file mode 100644
index 0000000000..6d0e3226a9
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
@@ -0,0 +1 @@
+#include <arm/socionext/uniphier-support-card.dtsi>
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
new file mode 100644
index 0000000000..97522fb0bf
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
+			sp9860g-1h10.dtb	\
+			sp9863a-1h10.dtb	\
+			ums512-1h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
new file mode 100644
index 0000000000..e15409f55f
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -0,0 +1,258 @@
+/*
+ * Spreadtrum SC2731 PMIC dts file
+ *
+ * Copyright (C) 2018, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&adi_bus {
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		charger@0 {
+			compatible = "sprd,sc2731-charger";
+			reg = <0x0>;
+			monitored-battery = <&bat>;
+		};
+
+		led-controller@200 {
+			compatible = "sprd,sc2731-bltc";
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				label = "red";
+				reg = <0x0>;
+			};
+
+			led@1 {
+				label = "green";
+				reg = <0x1>;
+			};
+
+			led@2 {
+				label = "blue";
+				reg = <0x2>;
+			};
+		};
+
+		rtc@280 {
+			compatible = "sprd,sc2731-rtc";
+			reg = <0x280>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <2>;
+		};
+
+		pmic_eic: gpio@300 {
+			compatible = "sprd,sc2731-eic";
+			reg = <0x300>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <5>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		efuse@380 {
+			compatible = "sprd,sc2731-efuse";
+			reg = <0x380>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			hwlocks = <&hwlock 12>;
+
+			fgu_calib: calib@6 {
+				reg = <0x6 0x2>;
+				bits = <0 9>;
+			};
+
+			adc_big_scale: calib@24 {
+				reg = <0x24 0x2>;
+			};
+
+			adc_small_scale: calib@26 {
+				reg = <0x26 0x2>;
+			};
+		};
+
+		pmic_adc: adc@480 {
+			compatible = "sprd,sc2731-adc";
+			reg = <0x480>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <0>;
+			#io-channel-cells = <1>;
+			hwlocks = <&hwlock 4>;
+			nvmem-cell-names = "big_scale_calib", "small_scale_calib";
+			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
+		};
+
+		fgu@a00 {
+			compatible = "sprd,sc2731-fgu";
+			reg = <0xa00>;
+			bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+			io-channels = <&pmic_adc 3>, <&pmic_adc 6>;
+			io-channel-names = "bat-temp", "charge-vol";
+			monitored-battery = <&bat>;
+			nvmem-cell-names = "fgu_calib";
+			nvmem-cells = <&fgu_calib>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <4>;
+		};
+
+		vibrator@ec8 {
+			compatible = "sprd,sc2731-vibrator";
+			reg = <0xec8>;
+		};
+
+		regulators {
+			compatible = "sprd,sc2731-regulator";
+
+			vddarm0: BUCK_CPU0 {
+				regulator-name = "vddarm0";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1996875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddarm1: BUCK_CPU1 {
+				regulator-name = "vddarm1";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1996875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			dcdcrf: BUCK_RF {
+				regulator-name = "dcdcrf";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2196875>;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-always-on;
+			};
+
+			vddcama0: LDO_CAMA0 {
+				regulator-name = "vddcama0";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+			};
+
+			vddcama1: LDO_CAMA1 {
+				regulator-name = "vddcama1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcammot: LDO_CAMMOT {
+				regulator-name = "vddcammot";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddvldo: LDO_VLDO {
+				regulator-name = "vddvldo";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddemmccore: LDO_EMMCCORE {
+				regulator-name = "vddemmccore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+				regulator-boot-on;
+			};
+
+			vddsdcore: LDO_SDCORE {
+				regulator-name = "vddsdcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsdio: LDO_SDIO {
+				regulator-name = "vddsdio";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddwifipa: LDO_WIFIPA {
+				regulator-name = "vddwifipa";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddusb33: LDO_USB33 {
+				regulator-name = "vddusb33";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd0: LDO_CAMD0 {
+				regulator-name = "vddcamd0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd1: LDO_CAMD1 {
+				regulator-name = "vddcamd1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcon: LDO_CON {
+				regulator-name = "vddcon";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamio: LDO_CAMIO {
+				regulator-name = "vddcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsram: LDO_SRAM {
+				regulator-name = "vddsram";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sc9836-openphone.dts b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
new file mode 100644
index 0000000000..e5657c35cd
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
@@ -0,0 +1,49 @@
+/*
+ * Spreadtrum SC9836 openphone board DTS file
+ *
+ * Copyright (C) 2014, Spreadtrum Communications Inc.
+ *
+ * This file is licensed under a dual GPLv2 or X11 license.
+ */
+
+/dts-v1/;
+
+#include "sc9836.dtsi"
+
+/ {
+	model = "Spreadtrum SC9836 Openphone Board";
+
+	compatible = "sprd,sc9836-openphone", "sprd,sc9836";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
new file mode 100644
index 0000000000..8bb8a70966
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -0,0 +1,224 @@
+/*
+ * Spreadtrum SC9836 SoC DTS file
+ *
+ * Copyright (C) 2014, Spreadtrum Communications Inc.
+ *
+ * This file is licensed under a dual GPLv2 or X11 license.
+ */
+
+#include "sharkl64.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "sprd,sc9836";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	etf@10003000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x10003000 0 0x1000>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etf_in: endpoint {
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@10001000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x10001000 0 0x1000>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				funnel_out_port0: endpoint {
+					remote-endpoint = <&etf_in>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					remote-endpoint = <&etm0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					remote-endpoint = <&etm1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					remote-endpoint = <&etm2_out>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel_in_port3: endpoint {
+					remote-endpoint = <&etm3_out>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+				funnel_in_port4: endpoint {
+					remote-endpoint = <&stm_out>;
+				};
+			};
+			/* Other input ports aren't connected to anyone */
+		};
+	};
+
+	etm@10440000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10440000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm0_out: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	etm@10540000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10540000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm1_out: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	etm@10640000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10640000 0 0x1000>;
+
+		cpu = <&cpu2>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm2_out: endpoint {
+					remote-endpoint = <&funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	etm@10740000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10740000 0 0x1000>;
+
+		cpu = <&cpu3>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm3_out: endpoint {
+					remote-endpoint = <&funnel_in_port3>;
+				};
+			};
+		};
+	};
+
+	stm@10006000 {
+		compatible = "arm,coresight-stm", "arm,primecell";
+		reg = <0 0x10006000 0 0x1000>,
+		      <0 0x01000000 0 0x180000>;
+		reg-names = "stm-base", "stm-stimulus-base";
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				stm_out: endpoint {
+					remote-endpoint = <&funnel_in_port4>;
+				};
+			};
+		};
+	};
+
+	gic: interrupt-controller@12001000 {
+		compatible = "arm,gic-400";
+		reg = <0 0x12001000 0 0x1000>,
+		      <0 0x12002000 0 0x2000>,
+		      <0 0x12004000 0 0x2000>,
+		      <0 0x12006000 0 0x2000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_on = <0xc4000003>;
+		cpu_off = <0x84000002>;
+		cpu_suspend = <0xc4000001>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
new file mode 100644
index 0000000000..e27eb3ed1d
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -0,0 +1,716 @@
+/*
+ * Spreadtrum SC9860 SoC
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "whale2.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@530000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530000>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU1: cpu@530001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530001>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU2: cpu@530002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530002>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU3: cpu@530003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530003>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU4: cpu@530100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU5: cpu@530101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU6: cpu@530102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530102>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU7: cpu@530103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530103>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+	};
+
+	idle-states{
+		entry-method = "psci";
+
+		CORE_PD: core_pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <700>;
+			min-residency-us = <2500>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010002>;
+		};
+
+		CLUSTER_PD: cluster_pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x01010003>;
+		};
+	};
+
+	gic: interrupt-controller@12001000 {
+		compatible = "arm,gic-400";
+		reg = <0 0x12001000 0 0x1000>,
+		      <0 0x12002000 0 0x2000>,
+		      <0 0x12004000 0 0x2000>,
+		      <0 0x12006000 0 0x2000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
+					| IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>,
+				     <&CPU1>,
+				     <&CPU2>,
+				     <&CPU3>,
+				     <&CPU4>,
+				     <&CPU5>,
+				     <&CPU6>,
+				     <&CPU7>;
+	};
+
+	soc {
+		pmu_gate: pmu-gate {
+			compatible = "sprd,sc9860-pmu-gate";
+			sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
+			clocks = <&ext_26m>;
+			#clock-cells = <1>;
+		};
+
+		pll: pll {
+			compatible = "sprd,sc9860-pll";
+			sprd,syscon = <&ana_regs>; /* 0x40400000 */
+			clocks = <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		ap_clk: clock-controller@20000000 {
+			compatible = "sprd,sc9860-ap-clk";
+			reg = <0 0x20000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>,
+				 <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		aon_prediv: aon-prediv {
+			compatible = "sprd,sc9860-aon-prediv";
+			reg = <0 0x402d0000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>,
+				 <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		apahb_gate: apahb-gate {
+			compatible = "sprd,sc9860-apahb-gate";
+			sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		aon_gate: aon-gate {
+			compatible = "sprd,sc9860-aon-gate";
+			sprd,syscon = <&aon_regs>; /* 0x402e0000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		aonsecure_clk: clock-controller@40880000 {
+			compatible = "sprd,sc9860-aonsecure-clk";
+			reg = <0 0x40880000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		agcp_gate: agcp-gate {
+			compatible = "sprd,sc9860-agcp-gate";
+			sprd,syscon = <&agcp_regs>; /* 0x415e0000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		gpu_clk: clock-controller@60200000 {
+			compatible = "sprd,sc9860-gpu-clk";
+			reg = <0 0x60200000 0 0x400>;
+			clocks = <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		vsp_clk: clock-controller@61000000 {
+			compatible = "sprd,sc9860-vsp-clk";
+			reg = <0 0x61000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		vsp_gate: vsp-gate {
+			compatible = "sprd,sc9860-vsp-gate";
+			sprd,syscon = <&vsp_regs>; /* 0x61100000 */
+			clocks = <&vsp_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		cam_clk: clock-controller@62000000 {
+			compatible = "sprd,sc9860-cam-clk";
+			reg = <0 0x62000000 0 0x4000>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		cam_gate: cam-gate {
+			compatible = "sprd,sc9860-cam-gate";
+			sprd,syscon = <&cam_regs>; /* 0x62100000 */
+			clocks = <&cam_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		disp_clk: clock-controller@63000000 {
+			compatible = "sprd,sc9860-disp-clk";
+			reg = <0 0x63000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		disp_gate: disp-gate {
+			compatible = "sprd,sc9860-disp-gate";
+			sprd,syscon = <&disp_regs>; /* 0x63100000 */
+			clocks = <&disp_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		apapb_gate: apapb-gate {
+			compatible = "sprd,sc9860-apapb-gate";
+			sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */
+			clocks = <&ap_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		funnel@10001000 { /* SoC Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					soc_funnel_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					soc_funnel_in_port0: endpoint {
+						remote-endpoint =
+						<&main_funnel_out_port>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					soc_funnel_in_port1: endpoint {
+						remote-endpoint =
+							<&stm_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+							<&soc_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		stm@10006000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x10006000 0 0x1000>,
+			      <0 0x01000000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					stm_out_port: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		funnel@11001000 { /* Cluster0 Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					cluster0_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster0_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster0_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster0_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					cluster0_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		funnel@11002000 { /* Cluster1 Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					cluster1_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster1_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster1_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster1_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					cluster1_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etf@11003000 { /*  ETF on Cluster0 */
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x11003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					cluster0_etf_out: endpoint {
+						remote-endpoint =
+						<&main_funnel_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					cluster0_etf_in: endpoint {
+						remote-endpoint =
+						<&cluster0_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@11004000 { /* ETF on Cluster1 */
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x11004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					cluster1_etf_out: endpoint {
+						remote-endpoint =
+						<&main_funnel_in_port1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					cluster1_etf_in: endpoint {
+						remote-endpoint =
+						<&cluster1_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@11005000 { /* Main Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x11005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					main_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					main_funnel_in_port0: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					main_funnel_in_port1: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@11440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11440000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@11540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11540000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@11640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11640000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@11740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11740000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm@11840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11840000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@11940000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11940000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@11a40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11a40000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@11b40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11b40000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+
+			key-volumedown {
+				label = "Volume Down Key";
+				linux,code = <KEY_VOLUMEDOWN>;
+				gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>;
+				debounce-interval = <2>;
+				wakeup-source;
+			};
+
+			key-volumeup {
+				label = "Volume Up Key";
+				linux,code = <KEY_VOLUMEUP>;
+				gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>;
+				debounce-interval = <2>;
+				wakeup-source;
+			};
+
+			key-power {
+				label = "Power Key";
+				linux,code = <KEY_POWER>;
+				gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>;
+				debounce-interval = <2>;
+				wakeup-source;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
new file mode 100644
index 0000000000..22d81ace74
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A SoC DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+#include <dt-bindings/clock/sprd,sc9863a-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "sharkl3.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		gic: interrupt-controller@14000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			reg = <0x0 0x14000000 0 0x20000>,	/* GICD */
+			      <0x0 0x14040000 0 0x100000>;	/* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ap_clk: clock-controller@21500000 {
+			compatible = "sprd,sc9863a-ap-clk";
+			reg = <0 0x21500000 0 0x1000>;
+			clocks = <&ext_32k>, <&ext_26m>;
+			clock-names = "ext-32k", "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		aon_clk: clock-controller@402d0000 {
+			compatible = "sprd,sc9863a-aon-clk";
+			reg = <0 0x402d0000 0 0x1000>;
+			clocks = <&ext_26m>, <&rco_100m>,
+				 <&ext_32k>, <&ext_4m>;
+			clock-names = "ext-26m", "rco-100m",
+				      "ext-32k", "ext-4m";
+			#clock-cells = <1>;
+		};
+
+		mm_clk: clock-controller@60900000 {
+			compatible = "sprd,sc9863a-mm-clk";
+			reg = <0 0x60900000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		funnel@10001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_little_out_port: endpoint {
+						remote-endpoint =
+						<&etf_little_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_little_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_little_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_little_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_little_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		etf@12002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_little_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port0>;
+					};
+				};
+			};
+
+			in-port {
+				port {
+					etf_little_in: endpoint {
+						remote-endpoint =
+						<&funnel_little_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@12003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_big_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_ca55_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_ca55_in_port0: endpoint {
+						remote-endpoint =
+						<&etf_little_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_ca55_in_port1: endpoint {
+						remote-endpoint =
+						<&etf_big_out>;
+					};
+				};
+			};
+		};
+
+		funnel@12005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_big_out_port: endpoint {
+						remote-endpoint =
+						<&etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_big_in_port0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_big_in_port1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_big_in_port2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_big_in_port3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etm@13040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm@13440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port3>;
+					};
+				};
+			};
+		};
+
+		ap-ahb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			sdio0: sdio@20300000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x20300000 0 0x1000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+
+				clock-names = "sdio", "enable";
+				clocks = <&aon_clk CLK_SDIO0_2X>,
+					 <&apahb_gate CLK_SDIO0_EB>;
+				assigned-clocks = <&aon_clk CLK_SDIO0_2X>;
+				assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+				bus-width = <4>;
+				no-sdio;
+				no-mmc;
+			};
+
+			sdio3: sdio@20600000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x20600000 0 0x1000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+				clock-names = "sdio", "enable";
+				clocks = <&aon_clk CLK_EMMC_2X>,
+					 <&apahb_gate CLK_EMMC_EB>;
+				assigned-clocks = <&aon_clk CLK_EMMC_2X>;
+				assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+				bus-width = <8>;
+				non-removable;
+				no-sdio;
+				no-sd;
+				cap-mmc-hw-reset;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
new file mode 100644
index 0000000000..206a4afdab
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc Sharkl3 platform DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap_ahb_regs: syscon@20e00000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x20e00000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x20e00000 0x4000>;
+
+			apahb_gate: apahb-gate {
+				compatible = "sprd,sc9863a-apahb-gate";
+				reg = <0x0 0x1020>;
+				#clock-cells = <1>;
+			};
+		};
+
+		pmu_regs: syscon@402b0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x402b0000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x402b0000 0x4000>;
+
+			pmu_gate: pmu-gate {
+				compatible = "sprd,sc9863a-pmu-gate";
+				reg = <0 0x1200>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		aon_apb_regs: syscon@402e0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x402e0000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x402e0000 0x4000>;
+
+			aonapb_gate: aonapb-gate {
+				compatible = "sprd,sc9863a-aonapb-gate";
+				reg = <0 0x1100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g2_regs: syscon@40353000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40353000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40353000 0x3000>;
+
+			pll: pll {
+				compatible = "sprd,sc9863a-pll";
+				reg = <0 0x100>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g4_regs: syscon@40359000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40359000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40359000 0x3000>;
+
+			mpll: mpll {
+				compatible = "sprd,sc9863a-mpll";
+				reg = <0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g5_regs: syscon@4035c000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x4035c000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4035c000 0x3000>;
+
+			rpll: rpll {
+				compatible = "sprd,sc9863a-rpll";
+				reg = <0 0x100>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g7_regs: syscon@40363000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40363000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40363000 0x3000>;
+
+			dpll: dpll {
+				compatible = "sprd,sc9863a-dpll";
+				reg = <0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		mm_ahb_regs: syscon@60800000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60800000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x60800000 0x3000>;
+
+			mm_gate: mm-gate {
+				compatible = "sprd,sc9863a-mm-gate";
+				reg = <0 0x1100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_apb_regs: syscon@71300000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x71300000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x71300000 0x4000>;
+
+			apapb_gate: apapb-gate {
+				compatible = "sprd,sc9863a-apapb-gate";
+				reg = <0 0x1000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart4: serial@400000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x400000 0x100>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: ext-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_32k: ext-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_4m: ext-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	rco_100m: rco-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sharkl64.dtsi b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
new file mode 100644
index 0000000000..69f64e7fce
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Spreadtrum Sharkl64 platform DTS file
+ *
+ * Copyright (C) 2014, Spreadtrum Communications Inc.
+ *
+ * This file is licensed under a dual GPLv2 or X11 license.
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap-apb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			uart0: serial@70000000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70000000 0 0x100>;
+				interrupts = <0 2 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+
+			uart1: serial@70100000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70100000 0 0x100>;
+				interrupts = <0 3 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+
+			uart2: serial@70200000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70200000 0 0x100>;
+				interrupts = <0 4 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+
+			uart3: serial@70300000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70300000 0 0x100>;
+				interrupts = <0 5 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+		};
+	};
+
+	clk26mhz: clk26mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
new file mode 100644
index 0000000000..6b95fd94ce
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -0,0 +1,74 @@
+/*
+ * Spreadtrum SP9860g board
+ *
+ * Copyright (C) 2017, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "sc9860.dtsi"
+#include "sc2731.dtsi"
+
+/ {
+	model = "Spreadtrum SP9860G 3GFHD Board";
+
+	compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
+
+	aliases {
+		serial0 = &uart0; /* for Bluetooth */
+		serial1 = &uart1; /* UART console */
+		serial2 = &uart2; /* Reserved */
+		serial3 = &uart3; /* for GPS */
+		spi0 = &adi_bus;
+	};
+
+	memory{
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x60000000>,
+		      <0x1 0x80000000 0 0x60000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <1900000>;
+		charge-term-current-microamp = <120000>;
+		constant_charge_voltage_max_microvolt = <4350000>;
+		internal-resistance-micro-ohms = <250000>;
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+			<4022000 85>, <3983000 80>, <3949000 75>,
+			<3917000 70>, <3889000 65>, <3864000 60>,
+			<3835000 55>, <3805000 50>, <3787000 45>,
+			<3777000 40>, <3773000 35>, <3770000 30>,
+			<3765000 25>, <3752000 20>, <3724000 15>,
+			<3680000 10>, <3605000 5>, <3400000 0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
new file mode 100644
index 0000000000..5c32c15963
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SP9863A-1h10 boards DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "sc9863a.dtsi"
+
+/ {
+	model = "Spreadtrum SP9863A-1H10 Board";
+
+	compatible = "sprd,sp9863a-1h10", "sprd,sc9863a";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/ums512-1h10.dts b/arch/arm64/boot/dts/sprd/ums512-1h10.dts
new file mode 100644
index 0000000000..46890f6d14
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums512-1h10.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512-1h10 boards DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "ums512.dtsi"
+
+/ {
+	model = "Unisoc UMS512-1H10 Board";
+
+	compatible = "sprd,ums512-1h10", "sprd,ums512";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+/* SD card */
+&sdio0 {
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	sprd,phy-delay-sd-uhs-sdr104 = <0x7f 0x73 0x72 0x72>;
+	sprd,phy-delay-sd-uhs-sdr50 = <0x6e 0x7f 0x01 0x01>;
+	sprd,phy-delay-sd-highspeed = <0x7f 0x1a 0x9a 0x9a>;
+	sprd,phy-delay-legacy = <0x7f 0x1a 0x9a 0x9a>;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+};
+
+/* EMMC storage */
+&sdio3 {
+	status = "okay";
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	cap-mmc-hw-reset;
+};
diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi
new file mode 100644
index 0000000000..97ac550af2
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums512.dtsi
@@ -0,0 +1,911 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512 SoC DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+#include <dt-bindings/clock/sprd,ums512-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@12000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x12000000 0 0x20000>,	/* GICD */
+			      <0x0 0x12040000 0 0x100000>;	/* GICR */
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ap_ahb_regs: syscon@20100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x20100000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x20100000 0x4000>;
+
+			apahb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-apahb-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pub_apb_regs: syscon@31050000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x31050000 0 0x9000>;
+		};
+
+		top_dvfs_apb_regs: syscon@322a0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x322a0000 0 0x8000>;
+		};
+
+		ap_intc0_regs: syscon@32310000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32310000 0 0x1000>;
+		};
+
+		ap_intc1_regs: syscon@32320000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32320000 0 0x1000>;
+		};
+
+		ap_intc2_regs: syscon@32330000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32330000 0 0x1000>;
+		};
+
+		ap_intc3_regs: syscon@32340000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32340000 0 0x1000>;
+		};
+
+		ap_intc4_regs: syscon@32350000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32350000 0 0x1000>;
+		};
+
+		ap_intc5_regs: syscon@32360000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32360000 0 0x1000>;
+		};
+
+		anlg_phy_g0_regs: syscon@32390000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32390000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x32390000 0x3000>;
+
+			dpll0: clock-controller@0 {
+				compatible = "sprd,ums512-g0-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g2_regs: syscon@323b0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323b0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323b0000 0x3000>;
+
+			mpll1: clock-controller@0 {
+				compatible = "sprd,ums512-g2-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g3_regs: syscon@323c0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323c0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323c0000 0x3000>;
+
+			pll1: clock-controller@0 {
+				compatible = "sprd,ums512-g3-pll";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_gc_regs: syscon@323e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323e0000 0x3000>;
+
+			pll2: clock-controller@0 {
+				compatible = "sprd,ums512-gc-pll";
+				reg = <0x0 0x100>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g10_regs: syscon@323f0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323f0000 0 0x3000>;
+		};
+
+		aon_apb_regs: syscon@327d0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327d0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327d0000 0x3000>;
+
+			aonapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-aon-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pmu_apb_regs: syscon@327e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327e0000 0x3000>;
+
+			pmu_gate: clock-controller@0 {
+				compatible = "sprd,ums512-pmu-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_apb_regs: syscon@3350d000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x3350d000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x3350d000 0x1000>;
+
+			audcpapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-audcpapb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_ahb_regs: syscon@335e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x335e0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x335e0000 0x1000>;
+
+			audcpahb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-audcpahb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_apb_regs: syscon@60100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60100000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x60100000 0x3000>;
+
+			gpu_clk: clock-controller@0 {
+				compatible = "sprd,ums512-gpu-clk";
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_dvfs_apb_regs: syscon@60110000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60110000 0 0x3000>;
+		};
+
+		mm_ahb_regs: syscon@62200000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x62200000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x62200000 0x3000>;
+
+			mm_gate: clock-controller@0 {
+				compatible = "sprd,ums512-mm-gate-clk";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_apb_regs: syscon@71000000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x71000000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x71000000 0x3000>;
+
+			apapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-apapb-gate";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_clk: clock-controller@20200000 {
+			compatible = "sprd,ums512-ap-clk";
+			reg = <0 0x20200000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		aon_clk: clock-controller@32080000 {
+			compatible = "sprd,ums512-aonapb-clk";
+			reg = <0 0x32080000 0 0x1000>;
+			clocks = <&ext_26m>, <&ext_32k>,
+				 <&ext_4m>, <&rco_100m>;
+			clock-names = "ext-26m", "ext-32k",
+				      "ext-4m", "rco-100m";
+			#clock-cells = <1>;
+		};
+
+		mm_clk: clock-controller@62100000 {
+			compatible = "sprd,ums512-mm-clk";
+			reg = <0 0x62100000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		/* SoC Funnel */
+		funnel@3c002000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3c002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_out_port>;
+					};
+				};
+			};
+		};
+
+		/* SoC ETF */
+		soc_etb: etb@3c003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3c003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core3/4/5/7 */
+		funnel@3e001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_lit_out_port: endpoint {
+						remote-endpoint =
+						<&corinth_etf_lit_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_core_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_core_in_port4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_core_in_port5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_core_in_port7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for little cores */
+		etf@3e002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_lit_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_lit_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_lit_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_lit_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for big cores */
+		etf@3e003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_big_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_big_out_port>;
+					};
+				};
+			};
+		};
+
+		/* Funnel to SoC */
+		funnel@3e004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_corinth_from_lit_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_lit_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_corinth_from_big_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core0/1/2/6 */
+		funnel@3e005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_big_out_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_core_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_core_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_core_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_core_in_port6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+			};
+		};
+
+		etm0: etm@3f040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@3f140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@3f240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@3f340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm4: etm@3f440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port4>;
+					};
+				};
+			};
+		};
+
+		etm5: etm@3f540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port5>;
+					};
+				};
+			};
+		};
+
+		etm6: etm@3f640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port6>;
+					};
+				};
+			};
+		};
+
+		etm7: etm@3f740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port7>;
+					};
+				};
+			};
+		};
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			sdio0: mmc@1100000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0x1100000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_SDIO0_2X>,
+					 <&apapb_gate CLK_SDIO0_EB>;
+				assigned-clocks = <&ap_clk CLK_SDIO0_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+
+			sdio3: mmc@1400000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0x1400000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_EMMC_2X>,
+					 <&apapb_gate CLK_EMMC_EB>;
+				assigned-clocks = <&ap_clk CLK_EMMC_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+		};
+
+		aon: bus@32000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x32000000 0x1000000>;
+
+			adi_bus: spi@100000 {
+				compatible = "sprd,ums512-adi";
+				reg = <0x100000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sprd,hw-channels = <2 0x18cc>, <3 0x18cc>, <13 0x1854>, <15 0x1874>,
+					<17 0x1844>,<19 0x1844>, <21 0x1864>, <30 0x1820>,
+					<35 0x19b8>, <39 0x19ac>;
+			};
+		};
+	};
+
+	ext_26m: clk-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_32k: clk-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_4m: clk-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	rco_100m: clk-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
new file mode 100644
index 0000000000..fece49704b
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -0,0 +1,314 @@
+/*
+ * Spreadtrum Whale2 platform peripherals
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap_ahb_regs: syscon@20210000 {
+			compatible = "syscon";
+			reg = <0 0x20210000 0 0x10000>;
+		};
+
+		pmu_regs: syscon@402b0000 {
+			compatible = "syscon";
+			reg = <0 0x402b0000 0 0x10000>;
+		};
+
+		aon_regs: syscon@402e0000 {
+			compatible = "syscon";
+			reg = <0 0x402e0000 0 0x10000>;
+		};
+
+		ana_regs: syscon@40400000 {
+			compatible = "syscon";
+			reg = <0 0x40400000 0 0x10000>;
+		};
+
+		agcp_regs: syscon@415e0000 {
+			compatible = "syscon";
+			reg = <0 0x415e0000 0 0x1000000>;
+		};
+
+		vsp_regs: syscon@61100000 {
+			compatible = "syscon";
+			reg = <0 0x61100000 0 0x10000>;
+		};
+
+		cam_regs: syscon@62100000 {
+			compatible = "syscon";
+			reg = <0 0x62100000 0 0x10000>;
+		};
+
+		disp_regs: syscon@63100000 {
+			compatible = "syscon";
+			reg = <0 0x63100000 0 0x10000>;
+		};
+
+		ap_apb_regs: syscon@70b00000 {
+			compatible = "syscon";
+			reg = <0 0x70b00000 0 0x40000>;
+		};
+
+		ap-apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART0_EB>,
+				       <&ap_clk CLK_UART0>, <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART1_EB>,
+				       <&ap_clk CLK_UART1>, <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART2_EB>,
+				       <&ap_clk CLK_UART2>, <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART3_EB>,
+				       <&ap_clk CLK_UART3>, <&ext_26m>;
+				status = "disabled";
+			};
+		};
+
+		ap-ahb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			ap_dma: dma-controller@20100000 {
+				compatible = "sprd,sc9860-dma";
+				reg = <0 0x20100000 0 0x4000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				/* For backwards compatibility: */
+				#dma-channels = <32>;
+				dma-channels = <32>;
+				clock-names = "enable";
+				clocks = <&apahb_gate CLK_DMA_EB>;
+			};
+
+			sdio3: sdio@50430000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x50430000 0 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+				clock-names = "sdio", "enable", "2x_enable";
+				clocks = <&aon_prediv CLK_EMMC_2X>,
+				       <&apahb_gate CLK_EMMC_EB>,
+				       <&aon_gate CLK_EMMC_2X_EN>;
+				assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
+				assigned-clock-parents = <&clk_l0_409m6>;
+
+				sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
+				sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
+				sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
+				sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
+				vmmc-supply = <&vddemmccore>;
+				bus-width = <8>;
+				non-removable;
+				no-sdio;
+				no-sd;
+				cap-mmc-hw-reset;
+				mmc-hs400-enhanced-strobe;
+				mmc-hs400-1_8v;
+				mmc-hs200-1_8v;
+				mmc-ddr-1_8v;
+			};
+		};
+
+		aon {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			adi_bus: spi@40030000 {
+				compatible = "sprd,sc9860-adi";
+				reg = <0 0x40030000 0 0x10000>;
+				hwlocks = <&hwlock 0>;
+				hwlock-names = "adi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			timer@40050000 {
+				compatible = "sprd,sc9860-timer";
+				reg = <0 0x40050000 0 0x20>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_32k>;
+			};
+
+			timer@40050020 {
+				compatible = "sprd,sc9860-suspend-timer";
+				reg = <0 0x40050020 0 0x20>;
+				clocks = <&ext_32k>;
+			};
+
+			hwlock: hwspinlock@40500000 {
+				compatible = "sprd,hwspinlock-r3p0";
+				reg = <0 0x40500000 0 0x1000>;
+				#hwlock-cells = <1>;
+				clock-names = "enable";
+				clocks = <&aon_gate CLK_SPLK_EB>;
+			};
+
+			eic_debounce: gpio@40210000 {
+				compatible = "sprd,sc9860-eic-debounce";
+				reg = <0 0x40210000 0 0x80>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eic_latch: gpio@40210080 {
+				compatible = "sprd,sc9860-eic-latch";
+				reg = <0 0x40210080 0 0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eic_async: gpio@402100a0 {
+				compatible = "sprd,sc9860-eic-async";
+				reg = <0 0x402100a0 0 0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eic_sync: gpio@402100c0 {
+				compatible = "sprd,sc9860-eic-sync";
+				reg = <0 0x402100c0 0 0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ap_gpio: gpio@40280000 {
+				compatible = "sprd,sc9860-gpio";
+				reg = <0 0x40280000 0 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pin_controller: pinctrl@402a0000 {
+				compatible = "sprd,sc9860-pinctrl";
+				reg = <0 0x402a0000 0 0x10000>;
+			};
+
+			watchdog@40310000 {
+				compatible = "sprd,sp9860-wdt";
+				reg = <0 0x40310000 0 0x1000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-sec = <12>;
+				clock-names = "enable", "rtc_enable";
+				clocks = <&aon_gate CLK_APCPU_WDG_EB>,
+				       <&aon_gate CLK_AP_WDG_RTC_EB>;
+			};
+		};
+
+		agcp {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			agcp_dma: dma-controller@41580000 {
+				compatible = "sprd,sc9860-dma";
+				reg = <0 0x41580000 0 0x4000>;
+				#dma-cells = <1>;
+				/* For backwards compatibility: */
+				#dma-channels = <32>;
+				dma-channels = <32>;
+				clock-names = "enable", "ashb_eb";
+				clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
+				       <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+			};
+		};
+	};
+
+	ext_32k: ext_32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_26m: ext_26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_rco_100m: ext_rco_100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ext-rco-100m";
+	};
+
+	clk_l0_409m6: clk_l0_409m6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <409600000>;
+		clock-output-names = "ext-409m6";
+	};
+};
diff --git a/arch/arm64/boot/dts/st/Makefile b/arch/arm64/boot/dts/st/Makefile
new file mode 100644
index 0000000000..881fe1296c
--- /dev/null
+++ b/arch/arm64/boot/dts/st/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_STM32) += stm32mp257f-ev1.dtb
diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
new file mode 100644
index 0000000000..d34a1d5e79
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_idle_pins_a: usart2-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>; /* USART2_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 8, ANALOG)>; /* USART2_RX */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
new file mode 100644
index 0000000000..5268a43218
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a35";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		ck_flexgen_08: ck-flexgen-08 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
+
+		ck_flexgen_51: ck-flexgen-51 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+
+		ck_icn_ls_mcu: ck-icn-ls-mcu {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	intc: interrupt-controller@4ac00000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x0 0x4ac10000 0x0 0x1000>,
+		      <0x0 0x4ac20000 0x0 0x2000>,
+		      <0x0 0x4ac40000 0x0 0x2000>,
+		      <0x0 0x4ac60000 0x0 0x2000>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		always-on;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges = <0x0 0x0 0x0 0x80000000>;
+
+		rifsc: rifsc-bus@42080000 {
+			compatible = "simple-bus";
+			reg = <0x42080000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usart2: serial@400e0000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x400e0000 0x400>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ck_flexgen_08>;
+				status = "disabled";
+			};
+		};
+
+		syscfg: syscon@44230000 {
+			compatible = "st,stm32mp25-syscfg", "syscon";
+			reg = <0x44230000 0x10000>;
+		};
+
+		pinctrl: pinctrl@44240000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp257-pinctrl";
+			ranges = <0 0x44240000 0xa0400>;
+			pins-are-numbered;
+
+			gpioa: gpio@44240000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@44250000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x10000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@44260000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@44270000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x30000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@44280000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x40000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@44290000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x50000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@442a0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x60000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@442b0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x70000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@442c0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x80000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@442d0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x90000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@442e0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa0000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pinctrl@46200000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp257-z-pinctrl";
+			ranges = <0 0x46200000 0x400>;
+			pins-are-numbered;
+
+			gpioz: gpio@46200000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi
new file mode 100644
index 0000000000..af48e82efe
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp251.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a35";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
new file mode 100644
index 0000000000..e6fa596211
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp253.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp257.dtsi b/arch/arm64/boot/dts/st/stm32mp257.dtsi
new file mode 100644
index 0000000000..5c5000d3d9
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp257.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp255.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
new file mode 100644
index 0000000000..39b4726cc0
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp257.dtsi"
+#include "stm32mp25xf.dtsi"
+#include "stm32mp25-pinctrl.dtsi"
+#include "stm32mp25xxai-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP257F-EV1 Evaluation Board";
+	compatible = "st,stm32mp257f-ev1", "st,stm32mp257";
+
+	aliases {
+		serial0 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		fw@80000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x4000000>;
+			no-map;
+		};
+	};
+};
+
+&usart2 {
+	pinctrl-names = "default", "idle", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_idle_pins_a>;
+	pinctrl-2 = <&usart2_sleep_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xc.dtsi b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi
new file mode 100644
index 0000000000..5e83a69264
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xf.dtsi b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi
new file mode 100644
index 0000000000..5e83a69264
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi
new file mode 100644
index 0000000000..abdbc7aebc
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AI>;
+
+	gpioa: gpio@44240000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@44250000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@44260000 {
+		status = "okay";
+		ngpios = <14>;
+		gpio-ranges = <&pinctrl 0 32 14>;
+	};
+
+	gpiod: gpio@44270000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@44280000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@44290000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@442a0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@442b0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 2 114 12>;
+	};
+
+	gpioi: gpio@442c0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@442d0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@442e0000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
+
+&pinctrl_z {
+	gpioz: gpio@46200000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl_z 0 400 10>;
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi
new file mode 100644
index 0000000000..2e0d4d349d
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AK>;
+
+	gpioa: gpio@44240000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@44250000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@44260000 {
+		status = "okay";
+		ngpios = <14>;
+		gpio-ranges = <&pinctrl 0 32 14>;
+	};
+
+	gpiod: gpio@44270000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@44280000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@44290000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@442a0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@442b0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 2 114 12>;
+	};
+
+	gpioi: gpio@442c0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	gpioz: gpio@46200000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl_z 0 400 10>;
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi
new file mode 100644
index 0000000000..2406e97255
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AL>;
+
+	gpioa: gpio@44240000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@44250000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@44260000 {
+		status = "okay";
+		ngpios = <14>;
+		gpio-ranges = <&pinctrl 0 32 14>;
+	};
+
+	gpiod: gpio@44270000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@44280000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@44290000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@442a0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@442b0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 2 114 12>;
+	};
+
+	gpioi: gpio@442c0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	gpioz: gpio@46200000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl_z 0 400 10>;
+	};
+};
diff --git a/arch/arm64/boot/dts/synaptics/Makefile b/arch/arm64/boot/dts/synaptics/Makefile
new file mode 100644
index 0000000000..de71ddda68
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+# Berlin SoC Family
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts
new file mode 100644
index 0000000000..c64a179ebb
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+	model = "Marvell BG4CT DMP board";
+	compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@1000000 {
+		device_type = "memory";
+		/* the first 16MB is for firmwares' usage */
+		reg = <0 0x01000000 0 0x7f000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts
new file mode 100644
index 0000000000..277dccfa05
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+	model = "Marvell BG4CT STB board";
+	compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@1000000 {
+		device_type = "memory";
+		/* the first 16MB is for firmwares' usage */
+		reg = <0 0x01000000 0 0x7f000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
new file mode 100644
index 0000000000..53d616c3cf
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "marvell,berlin4ct", "marvell,berlin";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		l2: cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <75>;
+				exit-latency-us = <155>;
+				min-residency-us = <1000>;
+			};
+		};
+	};
+
+	osc: osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc@f7000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xf7000000 0x1000000>;
+
+		gic: interrupt-controller@901000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x901000 0x1000>,
+			      <0x902000 0x2000>,
+			      <0x904000 0x2000>,
+			      <0x906000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			aic: interrupt-controller@3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		soc_pinctrl: pin-controller@ea8000 {
+			compatible = "marvell,berlin4ct-soc-pinctrl";
+			reg = <0xea8000 0x14>;
+		};
+
+		avio_pinctrl: pin-controller@ea8400 {
+			compatible = "marvell,berlin4ct-avio-pinctrl";
+			reg = <0xea8400 0x8>;
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			sic: interrupt-controller@1000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x1000 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			wdt0: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&osc>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@4000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x4000 0x100>;
+				clocks = <&osc>;
+				interrupts = <1>;
+			};
+
+			wdt2: watchdog@5000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x5000 0x100>;
+				clocks = <&osc>;
+				interrupts = <2>;
+			};
+
+			sm_gpio0: gpio@8000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x8000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio1: gpio@9000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x9000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			uart0: serial@d000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xd000 0x100>;
+				interrupts = <8>;
+				clocks = <&osc>;
+				reg-shift = <2>;
+				status = "disabled";
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+			};
+		};
+
+		system_pinctrl: pin-controller@fe2200 {
+			compatible = "marvell,berlin4ct-system-pinctrl";
+			reg = <0xfe2200 0xc>;
+
+			uart0_pmux: uart0-pmux {
+				groups = "SM_URT0_TXD", "SM_URT0_RXD";
+				function = "uart0";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/tesla/Makefile b/arch/arm64/boot/dts/tesla/Makefile
new file mode 100644
index 0000000000..a1ee50e2fd
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_TESLA_FSD) += \
+	fsd-evb.dtb
diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
new file mode 100644
index 0000000000..8d77946429
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Tesla FSD board device tree source
+ *
+ * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2021 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+/dts-v1/;
+#include "fsd.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Tesla Full Self-Driving (FSD) Evaluation board";
+	compatible = "tesla,fsd-evb", "tesla,fsd";
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,name = "FSD Audio Card";
+		simple-audio-card,widgets = "Line", "Line Out",
+					    "Line", "Line In";
+		simple-audio-card,routing = "Line Out", "LLOUT",
+					    "Line Out", "RLOUT",
+					    "MIC2L", "Line In",
+					    "MIC2R", "Line In";
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&tlv320aic3x>;
+			frame-master = <&tlv320aic3x>;
+
+			cpu-0 {
+				sound-dai = <&i2s_0 0>;
+			};
+			cpu-1 {
+				sound-dai = <&i2s_0 1>;
+			};
+			codec {
+				sound-dai = <&tlv320aic3x>;
+				system-clock-frequency = <33000000>;
+			};
+		};
+	};
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
+
+&hsi2c_5 {
+	status = "okay";
+
+	tlv320aic3x: codec@18 {
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		reset-gpios = <&gpg1 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2s_0 {
+	status = "okay";
+};
+
+&i2s_1 {
+	status = "okay";
+};
+
+&m_can0 {
+	status = "okay";
+};
+
+&m_can1 {
+	status = "okay";
+};
+
+&m_can2 {
+	status = "okay";
+};
+
+&m_can3 {
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&ufs {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
new file mode 100644
index 0000000000..3f898cf487
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tesla Full Self-Driving SoC device tree source
+ *
+ * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2021 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+#include "fsd-pinctrl.h"
+
+&pinctrl_fsys0 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf6: gpf6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpf5-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpf5-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_peric {
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb7: gpb7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg6: gpg6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg7: gpg7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpb6-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpb6-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpb0-2", "gpb0-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpb0-4", "gpb0-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpb0-6", "gpb0-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpb1-2", "gpb1-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpb1-4", "gpb1-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpb1-6", "gpb1-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpb7-0", "gpb7-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpb7-4", "gpb7-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	m_can0_bus: m-can0-bus-pins {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	m_can1_bus: m-can1-bus-pins {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	m_can2_bus: m-can2-bus-pins {
+		samsung,pins = "gpd0-4", "gpd0-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	m_can3_bus: m-can3-bus-pins {
+		samsung,pins = "gpd0-6", "gpd0-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2", "gpd1-3", "gpd1-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpd2-0", "gpd2-1", "gpd2-2", "gpd2-3", "gpd2-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_pmu {
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.h b/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
new file mode 100644
index 0000000000..c397d02208
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Tesla FSD DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM64_TESLA_FSD_PINCTRL_H__
+#define __DTS_ARM64_TESLA_FSD_PINCTRL_H__
+
+#define FSD_PIN_PULL_NONE		0
+#define FSD_PIN_PULL_DOWN		1
+#define FSD_PIN_PULL_UP			3
+
+#define FSD_PIN_DRV_LV1			0
+#define FSD_PIN_DRV_LV2			1
+#define FSD_PIN_DRV_LV4			2
+#define FSD_PIN_DRV_LV6			3
+
+#define FSD_PIN_FUNC_INPUT		0
+#define FSD_PIN_FUNC_OUTPUT		1
+#define FSD_PIN_FUNC_2			2
+#define FSD_PIN_FUNC_3			3
+#define FSD_PIN_FUNC_4			4
+#define FSD_PIN_FUNC_5			5
+#define FSD_PIN_FUNC_6			6
+#define FSD_PIN_FUNC_EINT		0xf
+#define FSD_PIN_FUNC_F			FSD_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM64_TESLA_FSD_PINCTRL_H__ */
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
new file mode 100644
index 0000000000..bb50a9f7db
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -0,0 +1,990 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tesla Full Self-Driving SoC device tree source
+ *
+ * Copyright (c) 2017-2022 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2022 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+#include <dt-bindings/clock/fsd-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "tesla,fsd";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &hsi2c_0;
+		i2c1 = &hsi2c_1;
+		i2c2 = &hsi2c_2;
+		i2c3 = &hsi2c_3;
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
+		pinctrl0 = &pinctrl_fsys0;
+		pinctrl1 = &pinctrl_peric;
+		pinctrl2 = &pinctrl_pmu;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpucl0_0>;
+				};
+				core1 {
+					cpu = <&cpucl0_1>;
+				};
+				core2 {
+					cpu = <&cpucl0_2>;
+				};
+				core3 {
+					cpu = <&cpucl0_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpucl1_0>;
+				};
+				core1 {
+					cpu = <&cpucl1_1>;
+				};
+				core2 {
+					cpu = <&cpucl1_2>;
+				};
+				core3 {
+					cpu = <&cpucl1_3>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpucl2_0>;
+				};
+				core1 {
+					cpu = <&cpucl2_1>;
+				};
+				core2 {
+					cpu = <&cpucl2_2>;
+				};
+				core3 {
+					cpu = <&cpucl2_3>;
+				};
+			};
+		};
+
+		/* Cluster 0 */
+		cpucl0_0: cpu@0 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x000>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl0_1: cpu@1 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x001>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl0_2: cpu@2 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x002>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl0_3: cpu@3 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x003>;
+				enable-method = "psci";
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		/* Cluster 1 */
+		cpucl1_0: cpu@100 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x100>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl1_1: cpu@101 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x101>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl1_2: cpu@102 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x102>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl1_3: cpu@103 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x103>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		/* Cluster 2 */
+		cpucl2_0: cpu@200 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x200>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl2_1: cpu@201 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x201>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl2_2: cpu@202 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x202>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl2_3: cpu@203 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x203>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+			cache-line-size = <64>;
+			cache-sets = <4096>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <30>;
+				exit-latency-us = <75>;
+				min-residency-us = <300>;
+			};
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpucl0_0>, <&cpucl0_1>, <&cpucl0_2>,
+				     <&cpucl0_3>, <&cpucl1_0>, <&cpucl1_1>,
+				     <&cpucl1_2>, <&cpucl1_3>, <&cpucl2_0>,
+				     <&cpucl2_1>, <&cpucl2_2>, <&cpucl2_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	fin_pll: clock {
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x0 0x0 0x18000000>;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x10400000 0x0 0x10000>, /* GICD */
+			      <0x0 0x10600000 0x0 0x200000>; /* GICR_RD+GICR_SGI */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		smmu_imem: iommu@10200000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x10200000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <7>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_0 */
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_1 */
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, /* for IMEM_0  */
+				     /* Per context non-secure context interrupts, 0-3 interrupts */
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_3 */
+		};
+
+		smmu_isp: iommu@12100000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x12100000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <11>;
+			interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_CSI   */
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_0  */
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_1  */
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_0 */
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_1 */
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_0 */
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_1 */
+				     /* Per context non-secure context interrupts, 0-7 interrupts */
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_3 */
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_4 */
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_5 */
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_6 */
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_7 */
+		};
+
+		smmu_peric: iommu@14900000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x14900000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <5>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, /* for PERIC */
+				     /* Per context non-secure context interrupts, 0-1 interrupts */
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
+		};
+
+		smmu_fsys0: iommu@15450000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x15450000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <5>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS0   */
+				     /* Per context non-secure context interrupts, 0-1 interrupts */
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
+		};
+
+		clock_imem: clock-controller@10010000 {
+			compatible = "tesla,fsd-clock-imem";
+			reg = <0x0 0x10010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_IMEM_TCUCLK>,
+				<&clock_cmu DOUT_CMU_IMEM_ACLK>,
+				<&clock_cmu DOUT_CMU_IMEM_DMACLK>;
+			clock-names = "fin_pll",
+				"dout_cmu_imem_tcuclk",
+				"dout_cmu_imem_aclk",
+				"dout_cmu_imem_dmaclk";
+		};
+
+		clock_cmu: clock-controller@11c10000 {
+			compatible = "tesla,fsd-clock-cmu";
+			reg = <0x0 0x11c10000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		clock_csi: clock-controller@12610000 {
+			compatible = "tesla,fsd-clock-cam_csi";
+			reg = <0x0 0x12610000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		sysreg_cam: system-controller@12630000 {
+			compatible = "tesla,fsd-cam-sysreg", "syscon";
+			reg = <0x0 0x12630000 0x0 0x500>;
+		};
+
+		clock_mfc: clock-controller@12810000 {
+			compatible = "tesla,fsd-clock-mfc";
+			reg = <0x0 0x12810000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		clock_peric: clock-controller@14010000 {
+			compatible = "tesla,fsd-clock-peric";
+			reg = <0x0 0x14010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV4>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV36>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV3_TBUCLK>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV20>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV4_DMACLK>;
+			clock-names = "fin_pll",
+				"dout_cmu_pll_shared0_div4",
+				"dout_cmu_peric_shared1div36",
+				"dout_cmu_peric_shared0div3_tbuclk",
+				"dout_cmu_peric_shared0div20",
+				"dout_cmu_peric_shared1div4_dmaclk";
+		};
+
+		sysreg_peric: system-controller@14030000 {
+			compatible = "tesla,fsd-peric-sysreg", "syscon";
+			reg = <0x0 0x14030000 0x0 0x1000>;
+		};
+
+		clock_fsys0: clock-controller@15010000 {
+			compatible = "tesla,fsd-clock-fsys0";
+			reg = <0x0 0x15010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV6>,
+				<&clock_cmu DOUT_CMU_FSYS0_SHARED1DIV4>,
+				<&clock_cmu DOUT_CMU_FSYS0_SHARED0DIV4>;
+			clock-names = "fin_pll",
+				"dout_cmu_pll_shared0_div6",
+				"dout_cmu_fsys0_shared1div4",
+				"dout_cmu_fsys0_shared0div4";
+		};
+
+		sysreg_fsys0: system-controller@15030000 {
+			compatible = "tesla,fsd-fsys0-sysreg", "syscon";
+			reg = <0x0 0x15030000 0x0 0x1000>;
+		};
+
+		clock_fsys1: clock-controller@16810000 {
+			compatible = "tesla,fsd-clock-fsys1";
+			reg = <0x0 0x16810000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+			clock-names = "fin_pll",
+				"dout_cmu_fsys1_shared0div8",
+				"dout_cmu_fsys1_shared0div4";
+		};
+
+		sysreg_fsys1: system-controller@16830000 {
+			compatible = "tesla,fsd-fsys1-sysreg", "syscon";
+			reg = <0x0 0x16830000 0x0 0x1000>;
+		};
+
+		mdma0: dma-controller@10100000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x10100000 0x0 0x1000>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_imem 0x800 0x0>;
+		};
+
+		mdma1: dma-controller@10110000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x10110000 0x0 0x1000>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_imem 0x801 0x0>;
+		};
+
+		pdma0: dma-controller@14280000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x14280000 0x0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_peric 0x2 0x0>;
+		};
+
+		pdma1: dma-controller@14290000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x14290000 0x0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_peric 0x1 0x0>;
+		};
+
+		serial_0: serial@14180000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x0 0x14180000 0x0 0x100>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 1>, <&pdma1 0>;
+			dma-names = "rx", "tx";
+			clocks = <&clock_peric PERIC_PCLK_UART0>,
+				 <&clock_peric PERIC_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14190000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x0 0x14190000 0x0 0x100>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 3>, <&pdma1 2>;
+			dma-names = "rx", "tx";
+			clocks = <&clock_peric PERIC_PCLK_UART1>,
+				 <&clock_peric PERIC_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		pmu_system_controller: system-controller@11400000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x0 0x11400000 0x0 0x5000>;
+		};
+
+		watchdog_0: watchdog@100a0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+		};
+
+		watchdog_1: watchdog@100b0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+		};
+
+		watchdog_2: watchdog@100c0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+		};
+
+		pwm_0: pwm@14100000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x0 0x14100000 0x0 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric PERIC_PWM0_IPCLKPORT_I_PCLK_S0>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		pwm_1: pwm@14110000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x0 0x14110000 0x0 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric PERIC_PWM1_IPCLKPORT_I_PCLK_S0>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		hsi2c_0: i2c@14200000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14200000 0x0 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: i2c@14210000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14210000 0x0 0x1000>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@14220000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14220000 0x0 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@14230000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@14240000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14240000 0x0 0x1000>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@14250000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14250000 0x0 0x1000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@14260000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@14270000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		i2s_0: i2s@140e0000 {
+			compatible = "tesla,fsd-i2s";
+			reg = <0x0 0x140e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 14>, <&pdma1 13>, <&pdma1 12>;
+			dma-names = "tx", "rx", "tx-sec";
+			#clock-cells = <1>;
+			clocks = <&clock_peric PERIC_PCLK_TDM0>,
+				 <&clock_peric PERIC_HCLK_TDM0>,
+				 <&clock_peric PERIC_HCLK_TDM0>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		i2s_1: i2s@140f0000 {
+			compatible = "tesla,fsd-i2s";
+			reg = <0x0 0x140f0000 0x0 0x100>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 17>, <&pdma1 16>, <&pdma1 15>;
+			dma-names = "tx", "rx", "tx-sec";
+			#clock-cells = <1>;
+			clocks = <&clock_peric PERIC_PCLK_TDM1>,
+				 <&clock_peric PERIC_HCLK_TDM1>,
+				 <&clock_peric PERIC_HCLK_TDM1>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		pinctrl_pmu: pinctrl@114f0000 {
+			compatible = "tesla,fsd-pinctrl";
+			reg = <0x0 0x114f0000 0x0 0x1000>;
+		};
+
+		pinctrl_peric: pinctrl@141f0000 {
+			compatible = "tesla,fsd-pinctrl";
+			reg = <0x0 0x141f0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys0: pinctrl@15020000 {
+			compatible = "tesla,fsd-pinctrl";
+			reg = <0x0 0x15020000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		m_can0: can@14088000 {
+			compatible = "bosch,m_can";
+			reg = <0x0 0x14088000 0x0 0x0200>,
+			      <0x0 0x14080000 0x0 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&m_can0_bus>;
+			clocks = <&clock_peric PERIC_MCAN0_IPCLKPORT_PCLK>,
+				 <&clock_peric PERIC_MCAN0_IPCLKPORT_CCLK>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		m_can1: can@14098000 {
+			compatible = "bosch,m_can";
+			reg = <0x0 0x14098000 0x0 0x0200>,
+			      <0x0 0x14090000 0x0 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&m_can1_bus>;
+			clocks = <&clock_peric PERIC_MCAN1_IPCLKPORT_PCLK>,
+				 <&clock_peric PERIC_MCAN1_IPCLKPORT_CCLK>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		m_can2: can@140a8000 {
+			compatible = "bosch,m_can";
+			reg = <0x0 0x140a8000 0x0 0x0200>,
+			      <0x0 0x140a0000 0x0 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&m_can2_bus>;
+			clocks = <&clock_peric PERIC_MCAN2_IPCLKPORT_PCLK>,
+				 <&clock_peric PERIC_MCAN2_IPCLKPORT_CCLK>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		m_can3: can@140b8000 {
+			compatible = "bosch,m_can";
+			reg = <0x0 0x140b8000 0x0 0x0200>,
+			      <0x0 0x140b0000 0x0 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&m_can3_bus>;
+			clocks = <&clock_peric PERIC_MCAN3_IPCLKPORT_PCLK>,
+				 <&clock_peric PERIC_MCAN3_IPCLKPORT_CCLK>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		spi_0: spi@14140000 {
+			compatible = "tesla,fsd-spi";
+			reg = <0x0 0x14140000 0x0 0x100>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 4>, <&pdma1 5>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_peric PERIC_PCLK_SPI0>,
+				<&clock_peric PERIC_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_1: spi@14150000 {
+			compatible = "tesla,fsd-spi";
+			reg = <0x0 0x14150000 0x0 0x100>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 6>, <&pdma1 7>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_peric PERIC_PCLK_SPI1>,
+				<&clock_peric PERIC_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_2: spi@14160000 {
+			compatible = "tesla,fsd-spi";
+			reg = <0x0 0x14160000 0x0 0x100>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 8>, <&pdma1 9>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_peric PERIC_PCLK_SPI2>,
+				<&clock_peric PERIC_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		timer@10040000 {
+			compatible = "tesla,fsd-mct", "samsung,exynos4210-mct";
+			reg = <0x0 0x10040000 0x0 0x800>;
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		ufs: ufs@15120000 {
+			compatible = "tesla,fsd-ufs";
+			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */
+			      <0x0 0x15121100 0x0 0x200>,  /* 1: Vendor specified */
+			      <0x0 0x15110000 0x0 0x8000>,  /* 2: UNIPRO */
+			      <0x0 0x15130000 0x0 0x100>;  /* 3: UFS protector */
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 UFS0_TOP0_HCLK_BUS>,
+				 <&clock_fsys0 UFS0_TOP0_CLK_UNIPRO>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			phys = <&ufs_phy>;
+			phy-names = "ufs-phy";
+			status = "disabled";
+		};
+
+		ufs_phy: ufs-phy@15124000 {
+			compatible = "tesla,fsd-ufs-phy";
+			reg = <0x0 0x15124000 0x0 0x800>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&clock_fsys0 UFS0_MPHY_REFCLK_IXTAL26>;
+			clock-names = "ref_clk";
+		};
+	};
+};
+
+#include "fsd-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
new file mode 100644
index 0000000000..8bd5acc6d6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Make file to build device tree binaries for boards based on
+# Texas Instruments Inc processors
+#
+# Copyright (C) 2016-2021 Texas Instruments Incorporated - https://www.ti.com/
+#
+# Entries are grouped as per SoC present on the board. Groups are sorted
+# alphabetically.
+
+# Boards with AM62x SoC
+k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-hdmi-audio.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-hdmi-audio.dtb
+
+# Boards with AM62Ax SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
+
+# Boards with AM62Px SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
+
+# Boards with AM64x SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
+
+k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
+k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+
+dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
+
+# Boards with AM65x SoC
+k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
+
+# Boards with J7200 SoC
+k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm.dtb
+
+# Boards with J721e SoC
+k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
+
+# Boards with J721s2 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
+k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
+
+# Boards with J784s4 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
+
+# Enable support for device-tree overlays
+DTC_FLAGS_k3-am625-sk += -@
+DTC_FLAGS_k3-am62-lp-sk += -@
+DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
+DTC_FLAGS_k3-j721e-common-proc-board += -@
+DTC_FLAGS_k3-j721s2-common-proc-board += -@
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
new file mode 100644
index 0000000000..5e6feb8cd1
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP
+ *
+ * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62x-sk-common.dtsi"
+
+/ {
+	compatible = "ti,am62-lp-sk", "ti,am625";
+	model = "Texas Instruments AM62x LP SK";
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of TPS630702RNMR */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM61460-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	vddshv_sdio: regulator-4 {
+		compatible = "regulator-gpio";
+		regulator-name = "vddshv_sdio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vddshv_sdio_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&ldo1_reg>;
+		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+};
+
+&main_pmx0 {
+	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
+		>;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (B16) EXTINTn */
+		>;
+	};
+};
+
+&main_i2c1 {
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "PRU_DETECT", "MMC1_SD_EN",
+				   "VPP_LDO_EN", "EXP_PS_3V3_En",
+				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+				   "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
+				   "GPIO_HDMI_RSTn", "CSI_GPIO0",
+				   "CSI_GPIO1", "GPIO_OLDI_INT",
+				   "HDMI_INTn", "TEST_GPIO2",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "UART1_FET_SEL",
+				   "", "IO_EXP_TEST_LED";
+
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+	};
+
+	exp2: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "", "",
+				   "", "",
+				   "", "",
+				   "", "",
+				   "WL_LT_EN", "CSI_RSTz",
+				   "", "",
+				   "", "",
+				   "", "",
+				   "SPI0_FET_SEL", "SPI0_FET_OE",
+				   "GPIO_OLDI_RSTn", "PRU_3V3_EN",
+				   "", "",
+				   "CSI_VLDO_SEL", "SOC_WLAN_SDIO_RST";
+	};
+};
+
+&sdhci1 {
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vddshv_sdio>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	tps65219: pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vcc_3v3_sys>;
+		buck2-supply = <&vcc_3v3_sys>;
+		buck3-supply = <&vcc_3v3_sys>;
+		ldo1-supply = <&vcc_3v3_sys>;
+		ldo2-supply = <&buck2_reg>;
+		ldo3-supply = <&vcc_3v3_sys>;
+		ldo4-supply = <&vcc_3v3_sys>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		ti,power-button;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "VCC1V8_SYS";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "VDD_LPDDR4";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "VDDSHV_SDIO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "VDDAR_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&tlv320aic3106 {
+	DVDD-supply = <&buck2_reg>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
new file mode 100644
index 0000000000..284b90c94d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -0,0 +1,958 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x70000000 0x10000>;
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
+		      <0x00 0x01880000 0x00 0xc0000>,   /* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_conf: syscon@100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x00100000 0x20000>;
+
+		phy_gmii_sel: phy@4044 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4044 0x8>;
+			#phy-cells = <1>;
+		};
+
+		epwm_tbclk: clock-controller@4130 {
+			compatible = "ti,am62-epwm-tbclk";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
+
+		audio_refclk0: clock-controller@82e0 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e0 0x4>;
+			clocks = <&k3_clks 157 0>;
+			assigned-clocks = <&k3_clks 157 0>;
+			assigned-clock-parents = <&k3_clks 157 8>;
+			#clock-cells = <0>;
+		};
+
+		audio_refclk1: clock-controller@82e4 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e4 0x4>;
+			clocks = <&k3_clks 157 10>;
+			assigned-clocks = <&k3_clks 157 10>;
+			assigned-clock-parents = <&k3_clks 157 18>;
+			#clock-cells = <0>;
+		};
+	};
+
+	dmss: bus@48000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		inta_main_dmss: interrupt-controller@48000000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x48000000 0x00 0x100000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <28>;
+			ti,interrupt-ranges = <4 68 36>;
+			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+		};
+
+		main_bcdma: dma-controller@485c0100 {
+			compatible = "ti,am64-dmss-bcdma";
+			reg = <0x00 0x485c0100 0x00 0x100>,
+			      <0x00 0x4c000000 0x00 0x20000>,
+			      <0x00 0x4a820000 0x00 0x20000>,
+			      <0x00 0x4aa40000 0x00 0x20000>,
+			      <0x00 0x4bc00000 0x00 0x100000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <3>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <26>;
+			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+		};
+
+		main_pktdma: dma-controller@485c0000 {
+			compatible = "ti,am64-dmss-pktdma";
+			reg = <0x00 0x485c0000 0x00 0x100>,
+			      <0x00 0x4a800000 0x00 0x20000>,
+			      <0x00 0x4aa00000 0x00 0x40000>,
+			      <0x00 0x4b800000 0x00 0x400000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <2>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <30>;
+			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+						<0x24>, /* CPSW_TX_CHAN */
+						<0x25>, /* SAUL_TX_0_CHAN */
+						<0x26>; /* SAUL_TX_1_CHAN */
+			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+						<0x11>, /* RING_CPSW_TX_CHAN */
+						<0x12>, /* RING_SAUL_TX_0_CHAN */
+						<0x13>; /* RING_SAUL_TX_1_CHAN */
+			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+						<0x2b>, /* CPSW_RX_CHAN */
+						<0x2d>, /* SAUL_RX_0_CHAN */
+						<0x2f>, /* SAUL_RX_1_CHAN */
+						<0x31>, /* SAUL_RX_2_CHAN */
+						<0x33>; /* SAUL_RX_3_CHAN */
+			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+						<0x2c>, /* FLOW_CPSW_RX_CHAN */
+						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+						<0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes = <&secure_proxy_main 12>,
+			 <&secure_proxy_main 13>;
+		reg-names = "debug_messages";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	crypto: crypto@40900000 {
+		compatible = "ti,am62-sa3ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+
+		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
+		       <&main_pktdma 0x7507 0>;
+		dma-names = "tx", "rx1", "rx2";
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2ac>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_esm: esm@420000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x420000 0x00 0x1000>;
+		ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <3>;
+		ti,interrupt-ranges = <0 32 16>;
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <190>, <191>, <192>,
+			     <193>, <194>, <195>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <92>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <180>, <181>, <182>,
+			     <183>, <184>, <185>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <52>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+	};
+
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 57 6>;
+		assigned-clock-parents = <&k3_clks 57 8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		ti,trm-icp = <0x2>;
+		bus-width = <8>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
+		status = "disabled";
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x8>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0x1>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
+		ti,clkbuf-sel = <0x7>;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	sdhci2: mmc@fa20000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x8>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x8>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0xa>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
+		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
+	};
+
+	usbss0: dwc3-usb@f900000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f900000 0x00 0x800>;
+		clocks = <&k3_clks 161 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb0: usb@31000000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31000000 0x00 0x50000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	usbss1: dwc3-usb@f910000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f910000 0x00 0x800>;
+		clocks = <&k3_clks 162 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31100000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31100000 0x00 0x50000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	fss: bus@fc00000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x0fc00000 0x00 0x70000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@fc40000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x0fc40000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 75 7>;
+			assigned-clocks = <&k3_clks 75 7>;
+			assigned-clock-parents = <&k3_clks 75 8>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	cpsw3g: ethernet@8000000 {
+		compatible = "ti,am642-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0x08000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>;
+		clocks = <&k3_clks 13 0>;
+		assigned-clocks = <&k3_clks 13 3>;
+		assigned-clock-parents = <&k3_clks 13 11>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_pktdma 0xc600 15>,
+		       <&main_pktdma 0xc601 15>,
+		       <&main_pktdma 0xc602 15>,
+		       <&main_pktdma 0xc603 15>,
+		       <&main_pktdma 0xc604 15>,
+		       <&main_pktdma 0xc605 15>,
+		       <&main_pktdma 0xc606 15>,
+		       <&main_pktdma 0xc607 15>,
+		       <&main_pktdma 0x4600 15>;
+		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+			    "tx7", "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel 1>;
+				mac-address = [00 00 00 00 00 00];
+				ti,syscon-efuse = <&wkup_conf 0x200>;
+			};
+
+			cpsw_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				phys = <&phy_gmii_sel 2>;
+				mac-address = [00 00 00 00 00 00];
+			};
+		};
+
+		cpsw3g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 13 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 13 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	dss: dss@30200000 {
+		compatible = "ti,am625-dss";
+		reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+		      <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+		      <0x00 0x30206000 0x00 0x1000>, /* vid */
+		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+		      <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+		      <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
+		      <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+		reg-names = "common", "vidl1", "vid",
+			    "ovr1", "ovr2", "vp1", "vp2";
+		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 186 6>,
+			 <&dss_vp1_clk>,
+			 <&k3_clks 186 2>;
+		clock-names = "fck", "vp1", "vp2";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	hwspinlock: spinlock@2a000000 {
+		compatible = "ti,am64-hwspinlock";
+		reg = <0x00 0x2a000000 0x00 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	mailbox0_cluster0: mailbox@29000000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29000000 0x00 0x200>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	ecap0: pwm@23100000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23100000 0x00 0x100>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 51 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap1: pwm@23110000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23110000 0x00 0x100>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 52 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap2: pwm@23120000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23120000 0x00 0x100>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 53 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti15: watchdog@e0f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e0f0000 0x00 0x100>;
+		clocks = <&k3_clks 130 0>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 130 0>;
+		assigned-clock-parents = <&k3_clks 130 2>;
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23000000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23010000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23020000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
new file mode 100644
index 0000000000..80a3e1db26
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_pmx0: pinctrl@4084000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x04084000 0x00 0x88>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_esm: esm@4100000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x4100000 0x00 0x1000>;
+		ti,esm-pins = <0>, <1>, <2>, <85>;
+	};
+
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@4800000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4800000 0x00 0x400>;
+		clocks = <&k3_clks 35 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@4810000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4810000 0x00 0x400>;
+		clocks = <&k3_clks 48 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@4820000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4820000 0x00 0x400>;
+		clocks = <&k3_clks 49 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@4830000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4830000 0x00 0x400>;
+		clocks = <&k3_clks 50 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_uart0: serial@4a00000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@4900000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04900000 0x00 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@4b00000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x04b00000 0x00 0x400>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 147 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@4b10000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x04b10000 0x00 0x400>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 148 0>;
+		status = "disabled";
+	};
+
+	mcu_gpio_intr: interrupt-controller@4210000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x04210000 0x00 0x200>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <5>;
+		ti,interrupt-ranges = <0 104 4>;
+	};
+
+	mcu_gpio0: gpio@4201000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x4201000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&mcu_gpio_intr>;
+		interrupts = <30>, <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <24>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 79 0>;
+		clock-names = "gpio";
+	};
+
+	mcu_rti0: watchdog@4880000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x04880000 0x00 0x100>;
+		clocks = <&k3_clks 131 0>;
+		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 131 0>;
+		assigned-clock-parents = <&k3_clks 131 2>;
+		/* Tightly coupled to M4F */
+		status = "reserved";
+	};
+
+	mcu_mcan0: can@4e08000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e08000 0x00 0x200>,
+		      <0x00 0x4e00000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@4e18000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e18000 0x00 0x200>,
+		      <0x00 0x4e10000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
new file mode 100644
index 0000000000..aa43e7407e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phycore-am62x
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "PHYTEC phyCORE-AM62x";
+	compatible = "phytec,am62-phycore-som", "ti,am625";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		gpio0 = &main_gpio0;
+		gpio1 = &main_gpio1;
+		i2c0 = &main_i2c0;
+		mmc0 = &sdhci0;
+		rtc0 = &i2c_som_rtc;
+		rtc1 = &wkup_rtc0;
+		spi0 = &ospi0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@9ca00000 {
+			compatible = "ramoops";
+			reg = <0x00 0x9ca00000 0x00 0x00100000>;
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x00>;
+			pmsg-size = <0x8000>;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0x00c00000>;
+			no-map;
+		};
+	};
+
+	vcc_5v0_som: regulator-vcc-5v0-som {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0_SOM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_5v0_som>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+	};
+};
+
+&main_pmx0 {
+	leds_pins_default: leds-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x034, PIN_OUTPUT, 7) /* (H21) OSPI0_CSN2.GPIO0_13 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+	};
+
+	main_mdio1_pins_default: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
+			AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
+			AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
+			AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
+			AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
+			AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
+			AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
+			AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
+			AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
+			AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
+			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
+			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+			AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+			AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+			AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+			AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+			AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+			AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+			AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */
+		>;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+	status = "okay";
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vcc_5v0_som>;
+		buck2-supply = <&vcc_5v0_som>;
+		buck3-supply = <&vcc_5v0_som>;
+		ldo1-supply = <&vdd_3v3>;
+		ldo2-supply = <&vdd_1v8>;
+		ldo3-supply = <&vcc_5v0_som>;
+		ldo4-supply = <&vcc_5v0_som>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		ti,power-button;
+		system-power-controller;
+
+		regulators {
+			vdd_core: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_3v3: buck2 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ddr4: buck3 {
+				regulator-name = "VDD_DDR4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddshv5_sdio: ldo1 {
+				regulator-name = "VDDSHV5_SDIO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allow-bypass;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddr_core: ldo2 {
+				regulator-name = "VDDR_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdda_1v8: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_2v5: ldo4 {
+				regulator-name = "VDD_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	i2c_som_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+	status = "okay";
+
+	serial_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
new file mode 100644
index 0000000000..a358757e26
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
new file mode 100644
index 0000000000..013357d17d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Dahlia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/ {
+	reg_1v8_sw: regulator-1v8-sw {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-carrier +V1.8_SW";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "verdin-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_refclk1>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s1_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_refclk1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_1v8_sw>;
+		CPVDD-supply = <&reg_1v8_sw>;
+		DBVDD-supply = <&reg_1v8_sw>;
+		DCVDD-supply = <&reg_1v8_sw>;
+		MICVDD-supply = <&reg_1v8_sw>;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	ti,driver-strength-ohm = <33>;
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	/* FIXME: WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
new file mode 100644
index 0000000000..6701cb8974
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Development carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/ {
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "verdin-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_refclk1>;
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>;
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+
+	cpsw3g_phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <38 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth2_rgmii_int>;
+		micrel,led-mode = <0>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	phy-handle = <&cpsw3g_phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s1_mclk>;
+		#sound-dai-cells = <0>;
+	};
+
+	/* IO Expander */
+	gpio_expander_21: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver. */
+&main_uart1 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	ti,driver-strength-ohm = <33>;
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	/* FIXME: WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi
new file mode 100644
index 0000000000..68d07695e1
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM non-WB variant
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ */
+
+&sdhci2 {
+	pinctrl-0 = <&pinctrl_sdhci2>;
+	bus-width = <4>;
+	status = "disabled";
+};
+
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
new file mode 100644
index 0000000000..90ddc71bcd
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM WB variant
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ */
+
+/ {
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_en>;
+		reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* On-module Wi-Fi */
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci2>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	ti,fails-without-test-cd;
+	ti,driver-strength-ohm = <50>;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+/* On-module Bluetooth */
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
new file mode 100644
index 0000000000..c685df7dea
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Yavia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>,
+			    <&pinctrl_qspi1_io2_gpio>,
+			    <&pinctrl_qspi1_io3_gpio>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>,
+		    <&pinctrl_qspi1_cs2_gpio>;
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	/* FIXME: WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
new file mode 100644
index 0000000000..5db52f2372
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -0,0 +1,1443 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		can0 = &main_mcan0;
+		can1 = &mcu_mcan0;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		i2c2 = &main_i2c2;
+		i2c3 = &mcu_i2c0;
+		i2c4 = &main_i2c3;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &wkup_rtc0;
+		serial0 = &main_uart1;
+		serial1 = &wkup_uart0;
+		serial2 = &main_uart0;
+		serial3 = &mcu_uart0;
+		serial4 = &main_uart5;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	verdin_gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_wake1_mico>;
+		status = "disabled";
+
+		verdin_key_wakeup: key-wakeup {
+			debounce-interval = <10>;
+			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+			gpios = <&main_gpio0 32 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>; /* 1G RAM */
+	};
+
+	opp-table {
+		/* Add 1.4GHz OPP. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	/* Module Power Supply */
+	reg_vsodimm: regulator-vsodimm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V_SODIMM";
+	};
+
+	/* Non PMIC On-module Supplies */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "On-module +V3.3";
+		vin-supply = <&reg_vsodimm>;
+	};
+
+	reg_1v2_dsi: regulator-1v2-dsi {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-name = "On-module +V1.2_DSI";
+		vin-supply = <&reg_1v8>;
+	};
+
+	/* Enabled by +V1.2_DSI */
+	reg_1v8_dsi: regulator-1v8-dsi {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-module +V1.8_DSI";
+		vin-supply = <&reg_1v8>;
+	};
+
+	/* Enabled by +V2.5_ETH */
+	reg_1v0_eth: regulator-1v0-eth {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1000000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-name = "On-module +V1.0_ETH";
+		vin-supply = <&reg_1v8>;
+	};
+
+	/* Enabled by +V2.5_ETH */
+	reg_1v8_eth: regulator-1v8-eth {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-module +V1.8_ETH";
+		vin-supply = <&reg_1v8>;
+	};
+
+	/* Verdin SD_1 Power Supply */
+	reg_sdhc1_vmmc: regulator-sdhci1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd1_pwr_en>;
+		enable-active-high;
+		/* Verdin SD_1_PWR_EN (SODIMM 76) */
+		gpio = <&main_gpio0 29 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SD";
+		startup-delay-us = <2000>;
+	};
+
+	reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vsel_sd>;
+		/* PMIC_VSEL_SD */
+		gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+		regulator-name = "LDO1-VSEL-SD (PMIC)";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		vin-supply = <&reg_sd_3v3_1v8>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+};
+
+&main_pmx0 {
+	/* Verdin PWM_1 */
+	pinctrl_epwm0_a: main-epwm0a-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01b4, PIN_OUTPUT, 2) /* (A13) SPI0_CS0.EHRPWM0_A */ /* SODIMM 15 */
+		>;
+	};
+
+	/* Verdin PWM_2 */
+	pinctrl_epwm0_b: main-epwm0b-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01b8, PIN_OUTPUT, 2) /* (C13) SPI0_CS1.EHRPWM0_B */ /* SODIMM 16 */
+		>;
+	};
+
+	/* Verdin PWM_3_DSI */
+	pinctrl_epwm1_a: main-epwm1a-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01bc, PIN_OUTPUT, 2) /* (A14) SPI0_CLK.EHRPWM1_A */ /* SODIMM 19 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CLK as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_clk_gpio: main-gpio0-0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0000, PIN_INPUT, 7) /* (H24) OSPI0_CLK.GPIO0_0 */ /* SODIMM 52 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO0 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io0_gpio: main-gpio0-3-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */ /* SODIMM 56 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO1 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io1_gpio: main-gpio0-4-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */ /* SODIMM 58 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO2 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io2_gpio: main-gpio0-5-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */ /* SODIMM 60 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO3 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io3_gpio: main-gpio0-6-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */ /* SODIMM 62 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */ /* SODIMM 54 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CS2# as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_cs2_gpio: main-gpio0-12-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */ /* SODIMM 64 */
+		>;
+	};
+
+	/* WiFi_W_WKUP_HOST# */
+	pinctrl_wifi_w_wkup_host: main-gpio0-15-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */ /* SODIMM 174 */
+		>;
+	};
+
+	/* WiFi_BT_WKUP_HOST# */
+	pinctrl_bt_wkup_host: main-gpio0-16-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */ /* SODIMM 172 */
+		>;
+	};
+
+	/* PMIC_ETH_RESET# */
+	pinctrl_eth_reset: main-gpio0-17-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0044, PIN_INPUT, 7) /* (N24) GPMC0_AD2.GPIO0_17 */
+		>;
+	};
+
+	/* PMIC_BRIDGE_RESET# */
+	pinctrl_bridge_reset: main-gpio0-20-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0050, PIN_INPUT, 7) /* (P22) GPMC0_AD5.GPIO0_20 */
+		>;
+	};
+
+	/* PMIC_VSEL_SD */
+	pinctrl_vsel_sd: main-gpio0-21-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0054, PIN_INPUT, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
+		>;
+	};
+
+	/* PMIC_EN_WIFI */
+	pinctrl_wifi_en: main-gpio0-22-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0058, PIN_INPUT, 7) /* (R23) GPMC0_AD7.GPIO0_22 */
+		>;
+	};
+
+	/* PMIC_ETH_INT# */
+	pinctrl_eth_int: main-gpio0-25-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0064, PIN_INPUT_PULLUP, 7) /* (T25) GPMC0_AD10.GPIO0_25 */
+		>;
+	};
+
+	/* WiFi_WKUP_BT# */
+	pinctrl_wifi_wkup_bt: main-gpio0-26-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0068, PIN_INPUT, 7) /* (R21) GPMC0_AD11.GPIO0_26 */
+		>;
+	};
+
+	/* WiFi_WKUP_WLAN# */
+	pinctrl_wifi_wkup_wlan: main-gpio0-27-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x006c, PIN_INPUT, 7) /* (T22) GPMC0_AD12.GPIO0_27 */
+		>;
+	};
+
+	/* Verdin SD_1_PWR_EN */
+	pinctrl_sd1_pwr_en: main-gpio0-29-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0074, PIN_INPUT, 7) /* (U25) GPMC0_AD14.GPIO0_29 */ /* SODIMM 76 */
+		>;
+	};
+
+	/* Verdin DSI_1_BKL_EN */
+	pinctrl_dsi1_bkl_en: main-gpio0-30-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0078, PIN_INPUT, 7) /* (U24) GPMC0_AD15.GPIO0_30 */ /* SODIMM 21 */
+		>;
+	};
+
+	/* Verdin CTRL_SLEEP_MOCI# */
+	pinctrl_ctrl_sleep_moci: main-gpio0-31-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x007c, PIN_INPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ /* SODIMM 256 */
+		>;
+	};
+
+	/* Verdin CTRL_WAKE1_MICO# */
+	pinctrl_ctrl_wake1_mico: main-gpio0-32-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ /* SODIMM 252 */
+		>;
+	};
+
+	/* Verdin I2S_2_D_OUT as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_d_out_gpio: main-gpio0-34-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x008c, PIN_INPUT, 7) /* (L25) GPMC0_WEn.GPIO0_34 */ /* SODIMM 46 */
+		>;
+	};
+
+	/* Verdin I2S_2_BCLK as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_bclk_gpio: main-gpio0-35-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0090, PIN_INPUT, 7) /* (M24) GPMC0_BE0n_CLE.GPIO0_35 */ /* SODIMM 42 */
+		>;
+	};
+
+	/* Verdin GPIO_6 */
+	pinctrl_gpio_6: main-gpio0-36-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0094, PIN_INPUT, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */ /* SODIMM 218 */
+		>;
+	};
+
+	/* Verdin ETH_2_RGMII_INT# */
+	pinctrl_eth2_rgmii_int: main-gpio0-38-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x009c, PIN_INPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */ /* SODIMM 189 */
+		>;
+	};
+
+	/* Verdin GPIO_5 */
+	pinctrl_gpio_5: main-gpio0-40-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */ /* SODIMM 216 */
+		>;
+	};
+
+	/* Verdin GPIO_7 */
+	pinctrl_gpio_7: main-gpio0-41-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */ /* SODIMM 220 */
+		>;
+	};
+
+	/* Verdin GPIO_8 */
+	pinctrl_gpio_8: main-gpio0-42-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */ /* SODIMM 222 */
+		>;
+	};
+
+	/* Verdin USB_1_OC# */
+	pinctrl_usb1_oc: main-gpio0-71-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0124, PIN_INPUT, 7) /* (A23) MMC2_SDCD.GPIO0_71 */ /* SODIMM 157 */
+		>;
+	};
+
+	/* Verdin USB_2_OC# */
+	pinctrl_usb2_oc: main-gpio0-72-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0128, PIN_INPUT, 7) /* (B23) MMC2_SDWP.GPIO0_72 */ /* SODIMM 187 */
+		>;
+	};
+
+	/* Verdin PWM_3_DSI as GPIO */
+	pinctrl_pwm3_dsi_gpio: main-gpio1-17-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01bc, PIN_INPUT, 7) /* (A14) SPI0_CLK.GPIO1_17 */ /* SODIMM 19 */
+		>;
+	};
+
+	/* Verdin QSPI_1_DQS as GPIO */
+	pinctrl_qspi1_dqs_gpio: main-gpio1-18-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c0, PIN_INPUT, 7) /* (B13) SPI0_D0.GPIO1_18 */ /* SODIMM 66 */
+		>;
+	};
+
+	/* Verdin USB_1_ID */
+	pinctrl_usb0_id: main-gpio1-19-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1.GPIO1_19 */ /* SODIMM 161 */
+		>;
+	};
+
+	/* Verdin DSI_1_INT# (pulled-up as active-low) */
+	pinctrl_dsi1_int: main-gpio1-49-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0244, PIN_INPUT_PULLUP, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ /* SODIMM 17 */
+		>;
+	};
+
+	/* On-module I2C - PMIC_I2C */
+	pinctrl_i2c0: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e0, PIN_INPUT, 0) /* (B16) I2C0_SCL */ /* PMIC_I2C_SCL */
+			AM62X_IOPAD(0x01e4, PIN_INPUT, 0) /* (A16) I2C0_SDA */ /* PMIC_I2C_SDA */
+		>;
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_i2c1: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ /* SODIMM 14 */
+			AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ /* SODIMM 12 */
+		>;
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_i2c2: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */
+			AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */
+		>;
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_i2c3: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */
+			AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */
+		>;
+	};
+
+	/* I2S_1_MCLK */
+	pinctrl_i2s1_mclk: main-system-audio-ext-reflock1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ /* SODIMM 38 */
+		>;
+	};
+
+	/* Verdin I2S_1 */
+	pinctrl_mcasp0: main-mcasp0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01a4, PIN_INPUT,  0) /* (B20) MCASP0_ACLKX */ /* SODIMM 30 */
+			AM62X_IOPAD(0x01a8, PIN_INPUT,  0) /* (D20) MCASP0_AFSX  */ /* SODIMM 32 */
+			AM62X_IOPAD(0x01a0, PIN_OUTPUT, 0) /* (E18) MCASP0_AXR0  */ /* SODIMM 34 */
+			AM62X_IOPAD(0x019c, PIN_INPUT,  0) /* (B18) MCASP0_AXR1  */ /* SODIMM 36 */
+		>;
+	};
+
+	/* Verdin I2S_2 */
+	pinctrl_mcasp1: main-mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0090, PIN_INPUT,  2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */ /* SODIMM 42 */
+			AM62X_IOPAD(0x0098, PIN_INPUT,  2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX     */ /* SODIMM 44 */
+			AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0       */ /* SODIMM 46 */
+			AM62X_IOPAD(0x0088, PIN_INPUT,  2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1   */ /* SODIMM 48 */
+		>;
+	};
+
+	/* Verdin CAN_1 */
+	pinctrl_mcan0: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01dc, PIN_INPUT,  0) /* (E15) MCAN0_RX */ /* SODIMM 22 */
+			AM62X_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ /* SODIMM 20 */
+		>;
+	};
+
+	/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+	pinctrl_mdio: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC  */ /* ETH_1_MDC,  SODIMM 193 */
+			AM62X_IOPAD(0x15c, PIN_INPUT, 0)  /* (AB22) MDIO0_MDIO */ /* ETH_1_MDIO, SODIMM 191 */
+		>;
+	};
+
+	/* On-module eMMC */
+	pinctrl_sdhci0: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /*  (Y3) MMC0_CMD  */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK  */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT, 0) /*  (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
+	/* Verdin SD_1 */
+	pinctrl_sdhci1: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT,        0) /* (A21) MMC1_CMD  */ /* SODIMM 74 */
+			AM62X_IOPAD(0x234, PIN_INPUT,        0) /* (B22) MMC1_CLK  */ /* SODIMM 78 */
+			AM62X_IOPAD(0x230, PIN_INPUT,        0) /* (A22) MMC1_DAT0 */ /* SODIMM 80 */
+			AM62X_IOPAD(0x22c, PIN_INPUT,        0) /* (B21) MMC1_DAT1 */ /* SODIMM 82 */
+			AM62X_IOPAD(0x228, PIN_INPUT,        0) /* (C21) MMC1_DAT2 */ /* SODIMM 70 */
+			AM62X_IOPAD(0x224, PIN_INPUT,        0) /* (D22) MMC1_DAT3 */ /* SODIMM 72 */
+			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ /* SODIMM 84 */
+		>;
+	};
+
+	/* On-module Wi-Fi on WB SKUs, module-specific SDIO otherwise */
+	pinctrl_sdhci2: main-mmc2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x120, PIN_INPUT, 0) /* (C24) MMC2_CMD   */ /* WiFi_SDIO_CMD   */
+			AM62X_IOPAD(0x118, PIN_INPUT, 0) /* (D25) MMC2_CLK   */ /* WiFi_SDIO_CLK   */
+			AM62X_IOPAD(0x114, PIN_INPUT, 0) /* (B24) MMC2_DAT0  */ /* WiFi_SDIO_DATA0 */
+			AM62X_IOPAD(0x110, PIN_INPUT, 0) /* (C25) MMC2_DAT1  */ /* WiFi_SDIO_DATA1 */
+			AM62X_IOPAD(0x10c, PIN_INPUT, 0) /* (E23) MMC2_DAT2  */ /* WiFi_SDIO_DATA2 */
+			AM62X_IOPAD(0x108, PIN_INPUT, 0) /* (D24) MMC2_DAT3  */ /* WiFi_SDIO_DATA3 */
+			AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
+		>;
+	};
+
+	/* Verdin QSPI_1 */
+	pinctrl_ospi0: main-ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK  */ /* SODIMM 52 */
+			AM62X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ /* SODIMM 54 */
+			AM62X_IOPAD(0x0030, PIN_OUTPUT, 0) /* (G21) OSPI0_CSn1 */ /* SODIMM 64 */
+			AM62X_IOPAD(0x000c, PIN_INPUT, 0)  /* (E25) OSPI0_D0   */ /* SODIMM 56 */
+			AM62X_IOPAD(0x0010, PIN_INPUT, 0)  /* (G24) OSPI0_D1   */ /* SODIMM 58 */
+			AM62X_IOPAD(0x0014, PIN_INPUT, 0)  /* (F25) OSPI0_D2   */ /* SODIMM 60 */
+			AM62X_IOPAD(0x0018, PIN_INPUT, 0)  /* (F24) OSPI0_D3   */ /* SODIMM 62 */
+		>;
+	};
+
+	/* Verdin ETH_1 RGMII (On-module PHY) */
+	pinctrl_rgmii1: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x14c, PIN_INPUT,  0) /* (AB17) RGMII1_RD0    */
+			AM62X_IOPAD(0x150, PIN_INPUT,  0) /* (AC17) RGMII1_RD1    */
+			AM62X_IOPAD(0x154, PIN_INPUT,  0) /* (AB16) RGMII1_RD2    */
+			AM62X_IOPAD(0x158, PIN_INPUT,  0) /* (AA15) RGMII1_RD3    */
+			AM62X_IOPAD(0x148, PIN_INPUT,  0) /* (AD17) RGMII1_RXC    */
+			AM62X_IOPAD(0x144, PIN_INPUT,  0) /* (AE17) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0    */
+			AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1    */
+			AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2    */
+			AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3    */
+			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC    */
+			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+		>;
+	};
+
+	/* Verdin ETH_2 RGMII */
+	pinctrl_rgmii2: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x184, PIN_INPUT,  0) /* (AE23) RGMII2_RD0    */ /* SODIMM 201 */
+			AM62X_IOPAD(0x188, PIN_INPUT,  0) /* (AB20) RGMII2_RD1    */ /* SODIMM 203 */
+			AM62X_IOPAD(0x18c, PIN_INPUT,  0) /* (AC21) RGMII2_RD2    */ /* SODIMM 205 */
+			AM62X_IOPAD(0x190, PIN_INPUT,  0) /* (AE22) RGMII2_RD3    */ /* SODIMM 207 */
+			AM62X_IOPAD(0x180, PIN_INPUT,  0) /* (AD23) RGMII2_RXC    */ /* SODIMM 197 */
+			AM62X_IOPAD(0x17c, PIN_INPUT,  0) /* (AD22) RGMII2_RX_CTL */ /* SODIMM 199 */
+			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /*  (Y18) RGMII2_TD0    */ /* SODIMM 221 */
+			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1    */ /* SODIMM 219 */
+			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2    */ /* SODIMM 217 */
+			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3    */ /* SODIMM 215 */
+			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC    */ /* SODIMM 213 */
+			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ /* SODIMM 211 */
+		>;
+	};
+
+	/* Verdin SPI_1 */
+	pinctrl_spi1: main-spi1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */
+			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
+			AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0  */ /* SODIMM 200 */
+			AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1  */ /* SODIMM 198 */
+		>;
+	};
+
+	/* ETH_25MHz_CLK */
+	pinctrl_eth_clock: main-system-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f0, PIN_OUTPUT_PULLUP, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
+		>;
+	};
+
+	/* PMIC_EXTINT# */
+	pinctrl_pmic_extint: main-system-extint-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */
+		>;
+	};
+
+	/* Verdin UART_3, used as the Linux console */
+	pinctrl_uart0: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT_PULLUP, 0) /* (D14) UART0_RXD */ /* SODIMM 147 */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT,       0) /* (E14) UART0_TXD */ /* SODIMM 149 */
+		>;
+	};
+
+	/* Verdin UART_1 */
+	pinctrl_uart1: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0194, PIN_INPUT_PULLUP, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ /* SODIMM 135 */
+			AM62X_IOPAD(0x0198, PIN_OUTPUT,       2) /* (A19) MCASP0_AXR2.UART1_RTSn */ /* SODIMM 133 */
+			AM62X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 2) /* (E19) MCASP0_AFSR.UART1_RXD  */ /* SODIMM 129 */
+			AM62X_IOPAD(0x01b0, PIN_OUTPUT,       2) /* (A20) MCASP0_ACLKR.UART1_TXD */ /* SODIMM 131 */
+		>;
+	};
+
+	/* Bluetooth on WB SKUs, module-specific UART otherwise */
+	pinctrl_uart5: main-uart5-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0008, PIN_INPUT_PULLUP, 5) /* (J24) OSPI0_DQS.UART5_CTSn    */ /* WiFi_UART_CTS */
+			AM62X_IOPAD(0x0004, PIN_OUTPUT,       5) /* (G25) OSPI0_LBCLKO.UART5_RTSn */ /* WiFi_UART_RTS */
+			AM62X_IOPAD(0x0034, PIN_INPUT_PULLUP, 5) /* (H21) OSPI0_CSn2.UART5_RXD    */ /* WiFi_UART_RXD */
+			AM62X_IOPAD(0x0038, PIN_OUTPUT,       5) /* (E24) OSPI0_CSn3.UART5_TXD    */ /* WiFi_UART_TXD */
+		>;
+	};
+
+	/* Verdin USB_1 */
+	pinctrl_usb0: main-usb0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0254, PIN_OUTPUT, 0) /* (C20) USB0_DRVVBUS */ /* SODIMM 155 */
+		>;
+	};
+
+	/* Verdin USB_2 */
+	pinctrl_usb1: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ /* SODIMM 185 */
+		>;
+	};
+
+	/* DSS VOUT0 RGB */
+	pinctrl_parallel_rgb: main-vout-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC            */
+			AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC            */
+			AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK             */
+			AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /*  (Y20) VOUT0_DE               */
+			AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /*  (U22) VOUT0_DATA0            */
+			AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /*  (V24) VOUT0_DATA1            */
+			AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /*  (W25) VOUT0_DATA2            */
+			AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /*  (W24) VOUT0_DATA3            */
+			AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /*  (Y25) VOUT0_DATA4            */
+			AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /*  (Y24) VOUT0_DATA5            */
+			AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /*  (Y23) VOUT0_DATA6            */
+			AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7            */
+			AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /*  (V21) VOUT0_DATA8            */
+			AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /*  (W21) VOUT0_DATA9            */
+			AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /*  (V20) VOUT0_DATA10           */
+			AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11           */
+			AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12           */
+			AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13           */
+			AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /*  (Y22) VOUT0_DATA14           */
+			AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15           */
+			AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /*  (R24) GPMC0_AD8.VOUT0_DATA16 */
+			AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /*  (R25) GPMC0_AD9.VOUT0_DATA17 */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	/* Verdin PCIE_1_RESET# */
+	pinctrl_pcie_1_reset: mcu-gpio0-0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0000, PIN_INPUT, 7) /* (E8) MCU_SPI0_CS0.MCU_GPIO0_0 */ /* SODIMM 244 */
+		>;
+	};
+
+	/* Verdin GPIO_1 */
+	pinctrl_gpio_1: mcu-gpio0-1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0004, PIN_INPUT, 7) /* (B8) MCU_SPI0_CS1.MCU_GPIO0_1 */ /* SODIMM 206 */
+		>;
+	};
+
+	/* Verdin GPIO_2 */
+	pinctrl_gpio_2: mcu-gpio0-2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0008, PIN_INPUT, 7) /* (A7) MCU_SPI0_CLK.MCU_GPIO0_2 */ /* SODIMM 208 */
+		>;
+	};
+
+	/* Verdin GPIO_3 */
+	pinctrl_gpio_3: mcu-gpio0-3-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x000c, PIN_INPUT, 7) /* (D9) MCU_SPI0_D0.MCU_GPIO0_3 */ /* SODIMM 210 */
+		>;
+	};
+
+	/* Verdin GPIO_4 */
+	pinctrl_gpio_4: mcu-gpio0-4-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (C9) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SODIMM 212 */
+		>;
+	};
+
+	/* Verdin I2C_3_HDMI */
+	pinctrl_mcu_i2c0: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /*  (A8) MCU_I2C0_SCL */ /* SODIMM 59 */
+			AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */
+		>;
+	};
+
+	/* Verdin CAN_2 */
+	pinctrl_mcu_mcan0: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0038, PIN_INPUT,  0) /* (B3) MCU_MCAN0_RX */ /* SODIMM 26 */
+			AM62X_MCU_IOPAD(0x0034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */ /* SODIMM 24 */
+		>;
+	};
+
+	/* Verdin UART_4 - Reserved to Cortex-M4 */
+	pinctrl_mcu_uart0: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0014, PIN_INPUT_PULLUP, 0) /* (B5) MCU_UART0_RXD */ /* SODIMM 151 */
+			AM62X_MCU_IOPAD(0x0018, PIN_OUTPUT,       0) /* (A5) MCU_UART0_TXD */ /* SODIMM 153 */
+		>;
+	};
+
+	/* Verdin CSI_1_MCLK */
+	pinctrl_csi1_mclk: wkup-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */ /* SODIMM 91 */
+		>;
+	};
+
+	/* Verdin UART_2 */
+	pinctrl_wkup_uart0: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x002c, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_UART0_CTSn */ /* SODIMM 143 */
+			AM62X_MCU_IOPAD(0x0030, PIN_OUTPUT,       0) /* (A4) WKUP_UART0_RTSn */ /* SODIMM 141 */
+			AM62X_MCU_IOPAD(0x0024, PIN_INPUT_PULLUP, 0) /* (B4) WKUP_UART0_RXD  */ /* SODIMM 137 */
+			AM62X_MCU_IOPAD(0x0028, PIN_OUTPUT,       0) /* (C5) WKUP_UART0_TXD  */ /* SODIMM 139 */
+		>;
+	};
+};
+
+/* VERDIN I2S_1_MCLK */
+&audio_refclk1 {
+	assigned-clock-rates = <25000000>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>;
+	status = "disabled";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	phy-handle = <&cpsw3g_phy0>;
+	phy-mode = "rgmii-rxid";
+	status = "disabled";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	status = "disabled";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	assigned-clocks = <&k3_clks 157 20>;
+	assigned-clock-parents = <&k3_clks 157 22>;
+	assigned-clock-rates = <25000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eth_clock>, <&pinctrl_mdio>;
+	status = "disabled";
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id2000.a231";
+		reg = <0>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>, <&pinctrl_eth_reset>;
+		reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <1000>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_parallel_rgb>;
+	status = "disabled";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP2: DPI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi_out: endpoint {
+			remote-endpoint = <&rgb_in>;
+		};
+	};
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epwm0_a>, <&pinctrl_epwm0_b>;
+	status = "disabled";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epwm1_a>;
+	status = "disabled";
+};
+
+&main_gpio0 {
+	gpio-line-names =
+		"SODIMM_52", /* 0 */
+		"",
+		"",
+		"SODIMM_56",
+		"SODIMM_58",
+		"SODIMM_60",
+		"SODIMM_62",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"SODIMM_54",
+		"SODIMM_64",
+		"",
+		"",
+		"SODIMM_174",
+		"SODIMM_172",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_76",
+		"SODIMM_21", /* 30 */
+		"SODIMM_256",
+		"SODIMM_252",
+		"",
+		"SODIMM_46",
+		"SODIMM_42",
+		"SODIMM_218",
+		"",
+		"SODIMM_189",
+		"",
+		"SODIMM_216", /* 40 */
+		"SODIMM_220",
+		"SODIMM_222",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 50 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 60 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 70 */
+		"SODIMM_157",
+		"SODIMM_187",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 80 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	verdin_ctrl_sleep_moci: ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <31 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+	};
+};
+
+&main_gpio1 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_15",
+		"SODIMM_16",
+		"SODIMM_19",
+		"SODIMM_66",
+		"SODIMM_161",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 30 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 40 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_17",
+		"", /* 50 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 60 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 70 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 80 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+/* On-module I2C - PMIC_I2C */
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	dsi_bridge: dsi@e {
+		compatible = "toshiba,tc358778";
+		reg = <0xe>;
+		assigned-clocks = <&k3_clks 157 20>;
+		assigned-clock-parents = <&k3_clks 157 22>;
+		assigned-clock-rates = <25000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bridge_reset>;
+		clocks = <&k3_clks 157 20>;
+		clock-names = "refclk";
+		reset-gpios = <&main_gpio0 20 GPIO_ACTIVE_LOW>;
+		vddc-supply = <&reg_1v2_dsi>;
+		vddmipi-supply = <&reg_1v2_dsi>;
+		vddio-supply = <&reg_1v8_dsi>;
+		status = "disabled";
+
+		dsi_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				rgb_in: endpoint {
+					data-lines = <18>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic_extint>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+
+		buck1-supply = <&reg_vsodimm>;
+		buck2-supply = <&reg_vsodimm>;
+		buck3-supply = <&reg_vsodimm>;
+		ldo1-supply = <&reg_3v3>;
+		ldo2-supply = <&reg_1v8>;
+		ldo3-supply = <&reg_3v3>;
+		ldo4-supply = <&reg_3v3>;
+		system-power-controller;
+		ti,power-button;
+
+		regulators {
+			reg_vdd_core: buck1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "+VDD_CORE (PMIC BUCK1)";
+			};
+
+			reg_1v8: buck2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8 (PMIC BUCK2)"; /* On-module and SODIMM 214 */
+			};
+
+			reg_vdd_ddr: buck3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "+VDD_DDR (PMIC BUCK3)";
+			};
+
+			reg_sd_3v3_1v8: ldo1 {
+				regulator-allow-bypass;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3_1.8_SD (PMIC LDO1)";
+			};
+
+			reg_vddr_core: ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "+VDDR_CORE (PMIC LDO2)";
+			};
+
+			reg_1v8a: ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8A (PMIC LDO3)";
+			};
+
+			reg_eth_2v5: ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <2500000>;
+				regulator-name = "+V2.5_ETH (PMIC LDO4)";
+			};
+		};
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Verdin PMIC_I2C (ADC_4 - ADC_3) */
+		channel@0 {
+			reg = <0>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C (ADC_4 - ADC_1) */
+		channel@1 {
+			reg = <1>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C (ADC_3 - ADC_1) */
+		channel@2 {
+			reg = <2>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C (ADC_2 - ADC_1) */
+		channel@3 {
+			reg = <3>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C ADC_4 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C ADC_3 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C ADC_2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C ADC_1 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "disabled";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcan0>;
+	status = "disabled";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	ti,pindir-d0-out-d1-in;
+	status = "disabled";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "disabled";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "disabled";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp0>;
+	op-mode = <0>; /* I2S mode */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 2 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tdm-slots = <2>;
+	rx-num-evt = <32>;
+	tx-num-evt = <32>;
+	#sound-dai-cells = <0>;
+	status = "disabled";
+};
+
+/* Verdin I2S_2 */
+&mcasp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp1>;
+	op-mode = <0>; /* I2S mode */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 2 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tdm-slots = <2>;
+	rx-num-evt = <32>;
+	tx-num-evt = <32>;
+	#sound-dai-cells = <0>;
+	status = "disabled";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_i2c0>;
+	status = "disabled";
+};
+
+&mcu_gpio0 {
+	gpio-line-names =
+		"SODIMM_244",
+		"SODIMM_206",
+		"SODIMM_208",
+		"SODIMM_210",
+		"SODIMM_212",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_mcan0>;
+	status = "disabled";
+};
+
+/* Verdin UART_4 - Cortex-M4 UART */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_uart0>;
+	status = "disabled";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ospi0>;
+	status = "disabled";
+};
+
+/* On-module eMMC */
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1>;
+	disable-wp;
+	ti,driver-strength-ohm = <50>;
+	vmmc-supply = <&reg_sdhc1_vmmc>;
+	vqmmc-supply = <&reg_sdhc1_vqmmc>;
+	status = "disabled";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	ti,vbus-divider;
+	status = "disabled";
+};
+
+/* TODO: role swich using ID pin */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb0_id>;
+	status = "disabled";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	ti,vbus-divider;
+	status = "disabled";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "disabled";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wkup_uart0>;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
new file mode 100644
index 0000000000..eae0528871
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	wkup_conf: syscon@43000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x43000000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
+	};
+
+	wkup_uart0: serial@2b300000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x2b300000 0x00 0x100>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@2b200000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2b200000 0x00 0x100>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 4>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	wkup_rtc0: rtc@2b1f0000 {
+		compatible = "ti,am62-rtc";
+		reg = <0x00 0x2b1f0000 0x00 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
+		clock-names = "vbus", "osc32k";
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		wakeup-source;
+	};
+
+	wkup_rti0: watchdog@2b000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2b000000 0x00 0x100>;
+		clocks = <&k3_clks 132 0>;
+		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 132 0>;
+		assigned-clock-parents = <&k3_clks 132 2>;
+		/* Used by DM firmware */
+		status = "reserved";
+	};
+
+	wkup_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
new file mode 100644
index 0000000000..11f14eef2d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62 SoC Family
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM625 SoC";
+	compatible = "ti,am625";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f0000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
+			 <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
+			 <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
+			 <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
+			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
+			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
+			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
+			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
+
+			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
+		};
+
+		cbass_wakeup: bus@b00000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+		};
+	};
+
+	dss_vp1_clk: clock-divider-oldi {
+		compatible = "fixed-factor-clock";
+		clocks = <&k3_clks 186 0>;
+		#clock-cells = <0>;
+		clock-div = <7>;
+		clock-mult = <1>;
+	};
+
+	#include "k3-am62-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am62-main.dtsi"
+#include "k3-am62-mcu.dtsi"
+#include "k3-am62-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
new file mode 100644
index 0000000000..2de74428a8
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://beagleplay.org/
+ *
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "k3-am625.dtsi"
+
+/ {
+	compatible = "beagle,am625-beagleplay", "ti,am625";
+	model = "BeagleBoard.org BeaglePlay";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		gpio0 = &main_gpio0;
+		gpio1 = &main_gpio1;
+		gpio2 = &mcu_gpio0;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		i2c2 = &main_i2c2;
+		i2c3 = &main_i2c3;
+		i2c4 = &wkup_i2c0;
+		i2c5 = &mcu_i2c0;
+		mdio-gpio0 = &mdio0;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		rtc0 = &rtc;
+		serial0 = &main_uart5;
+		serial1 = &main_uart6;
+		serial2 = &main_uart0;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops: ramoops@9ca00000 {
+			compatible = "ramoops";
+			reg = <0x00 0x9ca00000 0x00 0x00100000>;
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x00>;
+			pmsg-size = <0x8000>;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+
+	vsys_5v0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3: regulator-2 {
+		/* output of TLV62595DMQR-U12 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wlan_en: regulator-3 {
+		/* OUTPUT of SN74AVC2T244DQMR */
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vdd_3v3>;
+		gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_pins_default>;
+	};
+
+	vdd_3v3_sd: regulator-4 {
+		/* output of TPS22918DBVR-U21 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_3v3_sd_pins_default>;
+
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vdd_3v3>;
+		gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-5 {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_hs200_switch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&ldo1_reg>;
+		gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+
+		led-1 {
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			default-state = "keep";
+		};
+
+		led-2 {
+			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CPU;
+		};
+
+		led-3 {
+			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_LAN;
+		};
+
+		led-4 {
+			gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_WLAN;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_button_pins_default>;
+
+		usr: button-usr {
+			label = "User Key";
+			linux,code = <BTN_0>;
+			gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&it66121_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "it66121 HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
+		simple-audio-card,frame-master = <&hdmi_dailink_master>;
+
+		hdmi_dailink_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&it66121>;
+		};
+	};
+
+	/* Workaround for errata i2329 - just use mdio bitbang */
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mdio0_pins_default>;
+		gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpsw3g_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		cpsw3g_phy1: ethernet-phy@1 {
+			reg = <1>;
+			reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <25>;
+			reset-deassert-us = <60000>; /* T2 */
+		};
+	};
+};
+
+&main_pmx0 {
+	gpio0_pins_default: gpio0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
+			AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
+			AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
+			AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
+			AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
+			AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
+			AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
+			AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
+			AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
+			AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
+			AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
+			AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
+			AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
+			AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	usr_button_pins_default: usr-button-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
+		>;
+	};
+
+	grove_pins_default: grove-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+			AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+		>;
+	};
+
+	local_i2c_pins_default: local-i2c-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+	};
+
+	i2c2_1v8_pins_default: i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+			AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	mdio0_pins_default: mdio0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */
+			AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
+			AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
+			AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
+			AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
+			AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
+			AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
+			AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
+			AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
+			AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
+			AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
+			AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+		>;
+	};
+
+	emmc_pins_default: emmc-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+			AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
+	vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
+		>;
+	};
+
+	sd_pins_default: sd-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
+			AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+			AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
+			AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
+			AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
+			AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+			AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
+		>;
+	};
+
+	wifi_pins_default: wifi-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
+			AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
+			AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
+			AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
+			AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
+			AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
+			AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
+			AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
+		>;
+	};
+
+	wifi_en_pins_default: wifi-en-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
+		>;
+	};
+
+	wifi_wlirq_pins_default: wifi-wlirq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
+		>;
+	};
+
+	spe_pins_default: spe-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
+			AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
+			AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
+			AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
+			AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
+			AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
+			AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
+			AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
+			AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
+			AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
+			AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
+		>;
+	};
+
+	mikrobus_i2c_pins_default: mikrobus-i2c-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
+			AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
+		>;
+	};
+
+	mikrobus_uart_pins_default: mikrobus-uart-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */
+			AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */
+		>;
+	};
+
+	mikrobus_spi_pins_default: mikrobus-spi-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */
+			AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */
+			AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */
+			AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */
+		>;
+	};
+
+	mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
+			AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
+			AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
+		>;
+	};
+
+	console_pins_default: console-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
+			AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+		>;
+	};
+
+	wifi_debug_uart_pins_default: wifi-debug-uart-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
+			AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
+		>;
+	};
+
+	usb1_pins_default: usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
+		>;
+	};
+
+	hdmi_gpio_pins_default: hdmi-gpio-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
+			AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
+		>;
+	};
+
+	mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+			AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
+			AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
+			AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+			AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
+		>;
+	};
+
+	dss0_pins_default: dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+			AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
+			AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
+			AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
+			AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
+			AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
+			AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
+			AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
+			AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	i2c_qwiic_pins_default: i2c-qwiic-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
+			AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
+		>;
+	};
+
+	gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
+		>;
+	};
+
+	i2c_csi_pins_default: i2c-csi-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
+			AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
+		>;
+	};
+
+	wifi_32k_clk: mcu-clk-out-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
+		>;
+	};
+};
+
+&a53_opp_table {
+	/* Requires VDD_CORE to be at 0.85V */
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+	};
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_csi_pins_default>;
+	clock-frequency = <400000>;
+	/* Enable with overlay for camera sensor */
+};
+
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_qwiic_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+};
+
+&usbss1 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>,
+		    <&gbe_pmx_obsclk>;
+	assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
+	assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rmii";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	/* Workaround for errata i2329 - Use mdio bitbang */
+	status = "disabled";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_pins_default>;
+	gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT",	/* 0-2 */
+		"USR0", "USR1", "USR2", "USR3", "", "", "USR4",	/* 3-9 */
+		"EEPROM_WP",					/* 10 */
+		"CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2",	/* 11-12 */
+		"CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "",	/* 13-17 */
+		"USR_BUTTON", "", "", "", "", "", "", "", "",	/* 18-26 */
+		"", "", "", "", "", "", "", "", "", "HDMI_INT",	/* 27-36 */
+		"", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
+		"", "", "", "", "", "", "", "", "", "", "", "",	/* 43-54 */
+		"", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
+		"", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
+		"", "", "", "", "", "",				/* 79-84 */
+		"BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK",	/* 85-86 */
+		"", "", "", "", "";				/* 87-91 */
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_gpio_pins_default>;
+	gpio-line-names = "", "", "", "", "",			/* 0-4 */
+		"SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7",	/* 5-7 */
+		"MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9",		/* 8-9 */
+		"MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11",	/* 10-11 */
+		"MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0",	/* 12-13 */
+		"MIKROBUS_GPIO1_14",				/* 14 */
+		"", "", "", "", "VDD_3V3_SD", "", "",		/* 15-21 */
+		"MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23",	/* 22-23 */
+		"MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25",	/* 24-25 */
+		"", "", "", "", "", "", "", "", "", "", "", "",	/* 26-37 */
+		"", "", "", "", "", "", "", "", "", "",		/* 38-47 */
+		"SD_CD", "SD_VOLT_SEL", "", "";			/* 48-51 */
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&local_i2c_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "ti,bq32000";
+		reg = <0x68>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	tps65219: pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vsys_5v0>;
+		buck2-supply = <&vsys_5v0>;
+		buck3-supply = <&vsys_5v0>;
+		ldo1-supply = <&vdd_3v3>;
+		ldo2-supply = <&buck2_reg>;
+		ldo3-supply = <&vdd_3v3>;
+		ldo4-supply = <&vdd_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		system-power-controller;
+		ti,power-button;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/*
+				 * Regulator is left as is unused, vdd_sd
+				 * is controlled via GPIO with bypass config
+				 * as per the NVM configuration
+				 */
+				regulator-name = "VDD_SD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allow-bypass;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "VDDA_0V85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "VDD_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&grove_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1v8_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	it66121: bridge-hdmi@4c {
+		compatible = "ite,it66121";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_gpio_pins_default>;
+		vcn33-supply = <&vdd_3v3>;
+		vcn18-supply = <&buck2_reg>;
+		vrf12-supply = <&buck3_reg>;
+		reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it66121_in: endpoint {
+					bus-width = <24>;
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				it66121_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_i2c_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&main_spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_spi_pins_default>;
+	status = "okay";
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pins_default>;
+
+	vmmc-supply = <&vdd_3v3_sd>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+	cd-debounce-delay-ms = <100>;
+	ti,fails-without-test-cd;
+	status = "okay";
+};
+
+&sdhci2 {
+	vmmc-supply = <&wlan_en>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
+	bus-width = <4>;
+	non-removable;
+	ti,fails-without-test-cd;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	ti,driver-strength-ohm = <50>;
+	assigned-clocks = <&k3_clks 157 158>;
+	assigned-clock-parents = <&k3_clks 157 160>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1807";
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wlirq_pins_default>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&console_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+};
+
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_uart_pins_default>;
+	status = "okay";
+};
+
+&main_uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wifi_debug_uart_pins_default>;
+	status = "okay";
+};
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss0_pins_default>;
+};
+
+&dss_ports {
+	/* VP2: DPI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&it66121_in>;
+		};
+	};
+};
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp_hdmi_pins_default>;
+	auxclk-fs-ratio = <2177>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
new file mode 100644
index 0000000000..a438baf542
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phyboard-am62x
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am625.dtsi"
+#include "k3-am62-phycore-som.dtsi"
+
+/ {
+	compatible = "phytec,am625-phyboard-lyra-rdk",
+		     "phytec,am62-phycore-som", "ti,am625";
+	model = "PHYTEC phyBOARD-Lyra AM625";
+
+	aliases {
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		mmc1 = &sdhci1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		ethernet1 = &cpsw_port2;
+	};
+
+	can_tc1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins_default>;
+
+		key-home {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		key-menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
+
+		led-1 {
+			gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+		};
+	};
+
+	vcc_3v3_mmc: regulator-vcc-3v3-mmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_MMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	gpio_keys_pins_default: gpio-keys-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+
+	gpio_exp_int_pins_default: gpio-exp-int-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+		>;
+	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */
+			AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
+			AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */
+			AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */
+			AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */
+			AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
+			AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
+			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
+		>;
+	};
+
+	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
+			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
+			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
+			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
+			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
+			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
+			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
+			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
+			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
+			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
+			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
+			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */
+			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
+			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
+			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
+		>;
+	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+	};
+
+	user_leds_pins_default: user-leds-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */
+		>;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy3>;
+};
+
+&cpsw3g_mdio {
+	cpsw3g_phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	gpio_exp: gpio-expander@21 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_exp_int_pins_default>;
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <49 0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
+				  "GPIO2_LED2", "GPIO3_LVDS_GPIO",
+				  "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
+				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x51>;
+	};
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&can_tc1>;
+	status = "okay";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	/* Main UART1 may be used by TIFS firmware */
+	status = "okay";
+};
+
+&sdhci1 {
+	vmmc-supply = <&vcc_3v3_mmc>;
+	vqmmc-supply = <&vddshv5_sdio>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usbss1 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
new file mode 100644
index 0000000000..7c98c1b855
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM625 SK: https://www.ti.com/lit/zip/sprr448
+ *
+ * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62x-sk-common.dtsi"
+
+/ {
+	compatible = "ti,am625-sk", "ti,am625";
+	model = "Texas Instruments AM625 SK";
+
+	opp-table {
+		/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+
+	};
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of LM34936 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM61460-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-4 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v0>;
+		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	vcc_1v8: regulator-5 {
+		/* output of TPS6282518DMQ */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
+			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
+			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
+			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
+			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
+			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
+			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
+			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
+			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
+			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
+			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
+			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+			AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+			AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+			AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+			AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+			AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+			AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+			AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
+		>;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+};
+
+&main_i2c1 {
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "PRU_DETECT", "MMC1_SD_EN",
+				   "VPP_LDO_EN", "EXP_PS_3V3_En",
+				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+				   "UART1_FET_BUF_EN", "WL_LT_EN",
+				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
+				   "CSI_GPIO2", "PRU_3V3_EN",
+				   "HDMI_INTn", "PD_I2C_IRQ",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "UART1_FET_SEL",
+				   "TSINT#", "IO_EXP_TEST_LED";
+
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+	};
+};
+
+&sdhci1 {
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	cpsw3g_phy1: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&tlv320aic3106 {
+	DVDD-supply = <&vcc_1v8>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts
new file mode 100644
index 0000000000..d38bfef29d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Dahlia Board";
+	compatible = "toradex,verdin-am62-nonwifi-dahlia",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts
new file mode 100644
index 0000000000..31d2a3066d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Verdin Development Board";
+	compatible = "toradex,verdin-am62-nonwifi-dev",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts
new file mode 100644
index 0000000000..e80332e1f0
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Yavia Board";
+	compatible = "toradex,verdin-am62-nonwifi-yavia",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts
new file mode 100644
index 0000000000..3850a706ed
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Dahlia Board";
+	compatible = "toradex,verdin-am62-wifi-dahlia",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts
new file mode 100644
index 0000000000..4b657d6d3e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Verdin Development Board";
+	compatible = "toradex,verdin-am62-wifi-dev",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts
new file mode 100644
index 0000000000..8a2506068a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Yavia Board";
+	compatible = "toradex,verdin-am62-wifi-yavia",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi
new file mode 100644
index 0000000000..4193c2b3ee
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC family in Quad core configuration
+ *
+ * TRM: https://www.ti.com/lit/pdf/spruiv7
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 135 0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 136 0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 137 0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&wkup_conf>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
new file mode 100644
index 0000000000..de36abb243
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -0,0 +1,819 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62A SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x70000000 0x10000>;
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
+		      <0x00 0x01880000 0x00 0xc0000>,   /* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_conf: syscon@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x20000>;
+
+		phy_gmii_sel: phy@4044 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4044 0x8>;
+			#phy-cells = <1>;
+		};
+
+		epwm_tbclk: clock-controller@4130 {
+			compatible = "ti,am62-epwm-tbclk";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
+	};
+
+	dmss: bus@48000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06000000>;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			compatible = "ti,am654-secure-proxy";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			reg-names = "target_data", "rt", "scfg";
+			#mbox-cells = <1>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		inta_main_dmss: interrupt-controller@48000000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x48000000 0x00 0x100000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <28>;
+			ti,interrupt-ranges = <6 70 34>;
+			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+		};
+
+		main_bcdma: dma-controller@485c0100 {
+			compatible = "ti,am64-dmss-bcdma";
+			reg = <0x00 0x485c0100 0x00 0x100>,
+			      <0x00 0x4c000000 0x00 0x20000>,
+			      <0x00 0x4a820000 0x00 0x20000>,
+			      <0x00 0x4aa40000 0x00 0x20000>,
+			      <0x00 0x4bc00000 0x00 0x100000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <3>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <26>;
+			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+		};
+
+		main_pktdma: dma-controller@485c0000 {
+			compatible = "ti,am64-dmss-pktdma";
+			reg = <0x00 0x485c0000 0x00 0x100>,
+			      <0x00 0x4a800000 0x00 0x20000>,
+			      <0x00 0x4aa00000 0x00 0x40000>,
+			      <0x00 0x4b800000 0x00 0x400000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <2>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <30>;
+			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+						<0x24>, /* CPSW_TX_CHAN */
+						<0x25>, /* SAUL_TX_0_CHAN */
+						<0x26>; /* SAUL_TX_1_CHAN */
+			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+						<0x11>, /* RING_CPSW_TX_CHAN */
+						<0x12>, /* RING_SAUL_TX_0_CHAN */
+						<0x13>; /* RING_SAUL_TX_1_CHAN */
+			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+						<0x2b>, /* CPSW_RX_CHAN */
+						<0x2d>, /* SAUL_RX_0_CHAN */
+						<0x2f>, /* SAUL_RX_1_CHAN */
+						<0x31>, /* SAUL_RX_2_CHAN */
+						<0x33>; /* SAUL_RX_3_CHAN */
+			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+						<0x2c>, /* FLOW_CPSW_RX_CHAN */
+						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+						<0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		compatible = "ti,k2g-sci";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+		reg-names = "debug_messages";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes = <&secure_proxy_main 12>,
+			 <&secure_proxy_main 13>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2ac>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <3>;
+		ti,interrupt-ranges = <0 32 16>;
+		status = "disabled";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <190>, <191>, <192>,
+			     <193>, <194>, <195>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <92>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <180>, <181>, <182>,
+			     <183>, <184>, <185>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <52>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,clkbuf-sel = <0x7>;
+		bus-width = <4>;
+		no-1-8-v;
+		status = "disabled";
+	};
+
+	usbss0: dwc3-usb@f900000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f900000 0x00 0x800>;
+		clocks = <&k3_clks 161 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb0: usb@31000000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31000000 0x00 0x50000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	usbss1: dwc3-usb@f910000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f910000 0x00 0x800>;
+		clocks = <&k3_clks 162 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31100000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31100000 0x00 0x50000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	fss: bus@fc00000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x0fc00000 0x00 0x70000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		ospi0: spi@fc40000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x0fc40000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 75 7>;
+			assigned-clocks = <&k3_clks 75 7>;
+			assigned-clock-parents = <&k3_clks 75 8>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	cpsw3g: ethernet@8000000 {
+		compatible = "ti,am642-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x8000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>;
+		clocks = <&k3_clks 13 0>;
+		assigned-clocks = <&k3_clks 13 3>;
+		assigned-clock-parents = <&k3_clks 13 11>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		dmas = <&main_pktdma 0xc600 15>,
+		       <&main_pktdma 0xc601 15>,
+		       <&main_pktdma 0xc602 15>,
+		       <&main_pktdma 0xc603 15>,
+		       <&main_pktdma 0xc604 15>,
+		       <&main_pktdma 0xc605 15>,
+		       <&main_pktdma 0xc606 15>,
+		       <&main_pktdma 0xc607 15>,
+		       <&main_pktdma 0x4600 15>;
+		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+			    "tx7", "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel 1>;
+				mac-address = [00 00 00 00 00 00];
+				ti,syscon-efuse = <&wkup_conf 0x200>;
+			};
+
+			cpsw_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				phys = <&phy_gmii_sel 2>;
+				mac-address = [00 00 00 00 00 00];
+			};
+		};
+
+		cpsw3g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 13 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 13 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	hwspinlock: spinlock@2a000000 {
+		compatible = "ti,am64-hwspinlock";
+		reg = <0x00 0x2a000000 0x00 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	mailbox0_cluster0: mailbox@29000000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29000000 0x00 0x200>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster1: mailbox@29010000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29010000 0x00 0x200>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster2: mailbox@29020000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29020000 0x00 0x200>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster3: mailbox@29030000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29030000 0x00 0x200>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	main_mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti4: watchdog@e040000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e040000 0x00 0x100>;
+		clocks = <&k3_clks 205 0>;
+		power-domains = <&k3_pds 205 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 205 0>;
+		assigned-clock-parents = <&k3_clks 205 2>;
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23000000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23010000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23020000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ecap0: pwm@23100000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23100000 0x00 0x100>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 51 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap1: pwm@23110000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23110000 0x00 0x100>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 52 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap2: pwm@23120000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23120000 0x00 0x100>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 53 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
new file mode 100644
index 0000000000..a6d16a9408
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_pmx0: pinctrl@4084000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x04084000 0x00 0x88>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+		status = "disabled";
+	};
+
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@4800000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4800000 0x00 0x400>;
+		clocks = <&k3_clks 35 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@4810000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4810000 0x00 0x400>;
+		clocks = <&k3_clks 48 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@4820000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4820000 0x00 0x400>;
+		clocks = <&k3_clks 49 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@4830000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4830000 0x00 0x400>;
+		clocks = <&k3_clks 50 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_uart0: serial@4a00000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@4900000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04900000 0x00 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@4b00000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x04b00000 0x00 0x400>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 147 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@4b10000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x04b10000 0x00 0x400>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 148 0>;
+		status = "disabled";
+	};
+
+	mcu_gpio_intr: interrupt-controller@4210000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x04210000 0x00 0x200>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <5>;
+		ti,interrupt-ranges = <0 104 4>;
+	};
+
+	mcu_gpio0: gpio@4201000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x04201000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&mcu_gpio_intr>;
+		interrupts = <30>, <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <24>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 79 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	mcu_rti0: watchdog@4880000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x04880000 0x00 0x100>;
+		clocks = <&k3_clks 131 0>;
+		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 131 0>;
+		assigned-clock-parents = <&k3_clks 131 2>;
+		/* Tightly coupled to M4F */
+		status = "reserved";
+	};
+
+	mcu_mcan0: can@4e08000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e08000 0x00 0x200>,
+		      <0x00 0x4e00000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@4e18000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e18000 0x00 0x200>,
+		      <0x00 0x4e10000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
new file mode 100644
index 0000000000..85ce545633
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main2_thermal: main2-thermal {
+	       polling-delay-passive = <250>;	/* milliSeconds */
+	       polling-delay = <500>;		/* milliSeconds */
+	       thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			main2_crit: main2-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
new file mode 100644
index 0000000000..4e8279fa01
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	wkup_conf: syscon@43000000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x43000000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
+	};
+
+	wkup_uart0: serial@2b300000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x2b300000 0x00 0x100>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@2b200000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2b200000 0x00 0x100>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 4>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	wkup_rtc0: rtc@2b1f0000 {
+		compatible = "ti,am62-rtc";
+		reg = <0x00 0x2b1f0000 0x00 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
+		clock-names = "vbus", "osc32k";
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		wakeup-source;
+		status = "disabled";
+	};
+
+	wkup_rti0: watchdog@2b000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2b000000 0x00 0x100>;
+		clocks = <&k3_clks 132 0>;
+		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 132 0>;
+		assigned-clock-parents = <&k3_clks 132 2>;
+		/* Used by DM firmware */
+		status = "reserved";
+	};
+
+	wkup_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
new file mode 100644
index 0000000000..61a210ecd5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62A SoC Family
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM62A SoC";
+	compatible = "ti,am62a7";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f0000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
+			 <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
+			 <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
+			 <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
+			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
+			 <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */
+			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
+			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
+			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
+			 <0x00 0x7e000000 0x00 0x7e000000 0x00 0x00100000>, /* C7x_0 */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
+			 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
+			 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
+			 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU R5 IRAM0 */
+			 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>, /* MCU R5 IRAM1 */
+
+			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>,
+			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM */
+			 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM */
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */
+				 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
+				 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
+				 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */
+				 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */
+		};
+
+		cbass_wakeup: bus@b00000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */
+				 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
+		};
+	};
+
+	#include "k3-am62a-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am62a-main.dtsi"
+#include "k3-am62a-mcu.dtsi"
+#include "k3-am62a-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
new file mode 100644
index 0000000000..99f2878de4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM62A SK: https://www.ti.com/lit/zip/sprr459
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am62a7.dtsi"
+
+/ {
+	compatible = "ti,am62a7-sk", "ti,am62a7";
+	model = "Texas Instruments AM62A7 SK";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			no-map;
+		};
+	};
+
+	vmain_pd: regulator-0 {
+		/* TPS25750 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of TPS63070 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM5141-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_led_pins_default>;
+
+		led-0 {
+			label = "am62a-sk:green:heartbeat";
+			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+};
+
+&mcu_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
+			AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
+			AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
+			AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
+		>;
+	};
+};
+
+/* WKUP UART0 is used for DM firmware logs */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "reserved";
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
+			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
+			AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */
+			AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */
+			AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+			AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+			AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
+			AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+			AM62AX_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
+			AM62AX_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
+			AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
+			AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+			AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
+		>;
+	};
+
+	usr_led_pins_default: usr-led-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+	};
+
+	main_mdio1_pins_default: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
+			AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
+		>;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */
+			AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
+			AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
+			AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
+			AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */
+			AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */
+			AM62AX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */
+			AM62AX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */
+			AM62AX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */
+			AM62AX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */
+			AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */
+			AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
+		>;
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	typec_pd0: usb-power-controller@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			port {
+				usb_con_hs: endpoint {
+					remote-endpoint = <&usb0_hs_ep>;
+				};
+			};
+		};
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <100000>;
+
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "BT_EN_SOC", "MMC1_SD_EN",
+				   "VPP_EN", "EXP_PS_3V3_En",
+				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+				   "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
+				   "GPIO_HDMI_RSTn", "CSI_GPIO0",
+				   "CSI_GPIO1", "WLAN_ALERTn",
+				   "HDMI_INTn", "TEST_GPIO2",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "UART1_FET_SEL",
+				   "PD_I2C_IRQ", "IO_EXP_TEST_LED";
+	};
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	status = "okay";
+	vmmc-supply = <&vdd_mmc1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&main_gpio1 {
+	status = "okay";
+};
+
+&main_gpio_intr {
+	status = "okay";
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+/* Main UART1 is used for TIFS firmware logs */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	status = "reserved";
+};
+
+&usbss0 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	usb-role-switch;
+
+	port {
+		usb0_hs_ep: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+};
+
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
+
+&cpsw3g {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>;
+};
+
+&cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
new file mode 100644
index 0000000000..58f1c43edc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62A7 SoC family in Quad core configuration
+ *
+ * TRM: https://www.ti.com/lit/zip/spruj16
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62a.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
new file mode 100644
index 0000000000..c24ff90543
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P main domain peripherals
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x70000000 0x10000>;
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	dmss: bus@48000000 {
+		bootph-all;
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			bootph-all;
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		bootph-all;
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes = <&secure_proxy_main 12>,
+			 <&secure_proxy_main 13>;
+		reg-names = "debug_messages";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+
+		k3_pds: power-controller {
+			bootph-all;
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			bootph-all;
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			bootph-all;
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		bootph-all;
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2ac>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_timer0: timer@2400000 {
+		bootph-all;
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
new file mode 100644
index 0000000000..27ca1c9c6d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P MCU domain peripherals
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_pmx0: pinctrl@4084000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x04084000 0x00 0x88>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
new file mode 100644
index 0000000000..aaf4b793b5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P wakeup domain peripherals
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	wkup_conf: bus@43000000 {
+		bootph-all;
+		compatible = "simple-bus";
+		reg = <0x00 0x43000000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			bootph-all;
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
+	};
+
+	wkup_uart0: serial@2b300000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x2b300000 0x00 0x100>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
new file mode 100644
index 0000000000..294ab73ec9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62P SoC Family
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM62P5 SoC";
+	compatible = "ti,am62p5";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f0000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
+			 <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
+			 <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
+			 <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
+			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
+			 <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */
+			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
+			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
+			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
+			 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>,
+			 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>,
+			 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>,
+			 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>,
+
+			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>,
+			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>,
+			 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>;
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */
+				 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
+				 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
+				 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */
+				 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */
+		};
+
+		cbass_wakeup: bus@b00000 {
+			bootph-all;
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */
+				 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
+		};
+	};
+};
+
+/* Now include peripherals for each bus segment */
+#include "k3-am62p-main.dtsi"
+#include "k3-am62p-mcu.dtsi"
+#include "k3-am62p-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
new file mode 100644
index 0000000000..6fb17b17c9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P5-SK
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Schematics: https://www.ti.com/lit/zip/sprr487
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+
+/ {
+	compatible = "ti,am62p5-sk", "ti,am62p5";
+	model = "Texas Instruments AM62P5 SK";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	memory@80000000 {
+		/* 8G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000001 0x80000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			no-map;
+		};
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x1c8, PIN_INPUT, 0)	/* (A22) UART0_RXD */
+			AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0)	/* (B22) UART0_TXD */
+			AM62PX_IOPAD(0x1d0, PIN_INPUT, 0)	/* (A23) UART0_CTSn */
+			AM62PX_IOPAD(0x1d4, PIN_OUTPUT, 0)	/* (C22) UART0_RTSn */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x194, PIN_INPUT, 2)	/* (D25) MCASP0_AXR3 */
+			AM62PX_IOPAD(0x198, PIN_OUTPUT, 2)	/* (E25) MCASP0_AXR2 */
+			AM62PX_IOPAD(0x1ac, PIN_INPUT, 2)	/* (G23) MCASP0_AFSR */
+			AM62PX_IOPAD(0x1b0, PIN_OUTPUT, 2)	/* (G20) MCASP0_ACLKR */
+		>;
+	};
+};
+
+&main_uart0 {
+	bootph-all;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+};
+
+&cbass_mcu {
+	bootph-all;
+};
+
+&mcu_pmx0 {
+	bootph-all;
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0)	/* (C7) WKUP_UART0_CTSn */
+			AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0)	/* (C6) WKUP_UART0_RTSn */
+			AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0)	/* (D8) WKUP_UART0_RXD */
+			AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0)	/* (D7) WKUP_UART0_TXD */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by DM firmware */
+	bootph-all;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
new file mode 100644
index 0000000000..50147bb63e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P5 SoC family (quad core)
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * TRM: https://www.ti.com/lit/pdf/spruj83
+ */
+
+/dts-v1/;
+
+#include "k3-am62p.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 135 0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 136 0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 137 0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	l2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
new file mode 100644
index 0000000000..677ff8de4b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common dtsi for AM62x SK and derivatives
+ *
+ * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am625.dtsi"
+
+/ {
+	aliases {
+		serial2 = &main_uart0;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		spi0 = &ospi0;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@9ca00000 {
+			compatible = "ramoops";
+			reg = <0x00 0x9ca00000 0x00 0x00100000>;
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x00>;
+			pmsg-size = <0x8000>;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_led_pins_default>;
+
+		led-0 {
+			label = "am62-sk:green:heartbeat";
+			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+
+	tlv320_mclk: clk-0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62x-SKEVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
+
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	/* First pad number is ALW package and second is AMC package */
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
+			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
+			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */
+			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */
+			AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */
+			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */
+			AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
+			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
+			AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
+			AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
+			AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
+			AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */
+			AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */
+		>;
+	};
+
+	usr_led_pins_default: usr-led-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	main_mdio1_pins_default: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */
+			AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */
+		>;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
+			AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
+			AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16/AA17) RGMII1_RD2 */
+			AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15/Y15) RGMII1_RD3 */
+			AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17/AA16) RGMII1_RXC */
+			AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17/W14) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20/U14) RGMII1_TD0 */
+			AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20/AA19) RGMII1_TD1 */
+			AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18/Y17) RGMII1_TD2 */
+			AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18/AA18) RGMII1_TD3 */
+			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19/W16) RGMII1_TXC */
+			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */
+		>;
+	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
+		>;
+	};
+
+	main_mcasp1_pins_default: main-mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24/K17) GPMC0_BE0N_CLE.MCASP1_ACLKX */
+			AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23/P21) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25/J17) GPMC0_WEN.MCASP1_AXR0 */
+			AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */
+		>;
+	};
+
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x05c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
+			AM62X_IOPAD(0x060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
+			AM62X_IOPAD(0x064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
+			AM62X_IOPAD(0x068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
+			AM62X_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
+			AM62X_IOPAD(0x070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
+			AM62X_IOPAD(0x074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
+			AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */
+			AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */
+			AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B4/B5) WKUP_UART0_RXD */
+			AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C5/C6) WKUP_UART0_TXD */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by DM firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&main_uart1 {
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		/* AT24C512C-MAHM-T or M24512-DFMC6TG */
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+
+	typec_pd0: tps6598x@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usb_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs_ep>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <100000>;
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;	/* 2.0V */
+
+		/* Regulators */
+		AVDD-supply = <&vcc_3v3_sys>;
+		IOVDD-supply = <&vcc_3v3_sys>;
+		DRVDD-supply = <&vcc_3v3_sys>;
+	};
+
+	sii9022: bridge-hdmi@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		interrupt-parent = <&exp1>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = < 0 >;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&usbss0 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usbss1 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	usb-role-switch;
+
+	port@0 {
+		reg = <0>;
+		usb0_hs_ep: endpoint {
+		    remote-endpoint = <&usb_con_hs>;
+	       };
+	};
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+};
+
+&dss_ports {
+	/* VP2: DPI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso
new file mode 100644
index 0000000000..43a0ddc123
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * Audio playback via HDMI for AM625-SK and AM62-LP SK.
+ *
+ * Links:
+ * AM625 SK: https://www.ti.com/tool/SK-AM62
+ * AM62-LP SK: https://www.ti.com/tool/SK-AM62-LP
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	hdmi_audio: sound-sii9022 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62x-Sil9022-HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
+		simple-audio-card,frame-master = <&hdmi_dailink_master>;
+
+		hdmi_dailink_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sii9022>;
+		};
+	};
+};
+
+&mcasp1 {
+	auxclk-fs-ratio = <2177>;
+};
+
+&codec_audio {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
new file mode 100644
index 0000000000..0df54a7418
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -0,0 +1,1546 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM642 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+	serdes_refclk: clock-cmnrefclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x70000000 0x200000>;
+
+		tfa-sram@1c0000 {
+			reg = <0x1c0000 0x20000>;
+		};
+
+		dmsc-sram@1e0000 {
+			reg = <0x1e0000 0x1c000>;
+		};
+
+		sproxy-sram@1fc000 {
+			reg = <0x1fc000 0x4000>;
+		};
+	};
+
+	main_conf: syscon@43000000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x0 0x43000000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x43000000 0x20000>;
+
+		chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x00000014 0x4>;
+		};
+
+		serdes_ln_ctrl: mux-controller {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */
+		};
+
+		phy_gmii_sel: phy@4044 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4044 0x8>;
+			#phy-cells = <1>;
+		};
+
+		epwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am64-epwm-tbclk";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01840000 0x00 0xC0000>,	/* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,	/* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,	/* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;	/* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	dmss: bus@48000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		inta_main_dmss: interrupt-controller@48000000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x48000000 0x00 0x100000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <28>;
+			ti,interrupt-ranges = <4 68 36>;
+			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+		};
+
+		main_bcdma: dma-controller@485c0100 {
+			compatible = "ti,am64-dmss-bcdma";
+			reg = <0x00 0x485c0100 0x00 0x100>,
+			      <0x00 0x4c000000 0x00 0x20000>,
+			      <0x00 0x4a820000 0x00 0x20000>,
+			      <0x00 0x4aa40000 0x00 0x20000>,
+			      <0x00 0x4bc00000 0x00 0x100000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <3>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <26>;
+			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+		};
+
+		main_pktdma: dma-controller@485c0000 {
+			compatible = "ti,am64-dmss-pktdma";
+			reg = <0x00 0x485c0000 0x00 0x100>,
+			      <0x00 0x4a800000 0x00 0x20000>,
+			      <0x00 0x4aa00000 0x00 0x40000>,
+			      <0x00 0x4b800000 0x00 0x400000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <2>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <30>;
+			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+						<0x24>, /* CPSW_TX_CHAN */
+						<0x25>, /* SAUL_TX_0_CHAN */
+						<0x26>, /* SAUL_TX_1_CHAN */
+						<0x27>, /* ICSSG_0_TX_CHAN */
+						<0x28>; /* ICSSG_1_TX_CHAN */
+			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+						<0x11>, /* RING_CPSW_TX_CHAN */
+						<0x12>, /* RING_SAUL_TX_0_CHAN */
+						<0x13>, /* RING_SAUL_TX_1_CHAN */
+						<0x14>, /* RING_ICSSG_0_TX_CHAN */
+						<0x15>; /* RING_ICSSG_1_TX_CHAN */
+			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+						<0x2b>, /* CPSW_RX_CHAN */
+						<0x2d>, /* SAUL_RX_0_CHAN */
+						<0x2f>, /* SAUL_RX_1_CHAN */
+						<0x31>, /* SAUL_RX_2_CHAN */
+						<0x33>, /* SAUL_RX_3_CHAN */
+						<0x35>, /* ICSSG_0_RX_CHAN */
+						<0x37>; /* ICSSG_1_RX_CHAN */
+			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+						<0x2c>, /* FLOW_CPSW_RX_CHAN */
+						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+						<0x32>, /* FLOW_SAUL_RX_2/3_CHAN */
+						<0x36>, /* FLOW_ICSSG_0_RX_CHAN */
+						<0x38>; /* FLOW_ICSSG_1_RX_CHAN */
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes = <&secure_proxy_main 12>,
+			<&secure_proxy_main 13>;
+		reg-names = "debug_messages";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2d0>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 1>;
+		assigned-clock-parents = <&k3_clks 36 2>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 1>;
+		assigned-clock-parents = <&k3_clks 37 2>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 1>;
+		assigned-clock-parents = <&k3_clks 38 2>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 1>;
+		assigned-clock-parents = <&k3_clks 39 2>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 1>;
+		assigned-clock-parents = <&k3_clks 40 2>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 1>;
+		assigned-clock-parents = <&k3_clks 41 2>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 1>;
+		assigned-clock-parents = <&k3_clks 42 2>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 1>;
+		assigned-clock-parents = <&k3_clks 43 2>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 44 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 44 1>;
+		assigned-clock-parents = <&k3_clks 44 2>;
+		power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 45 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 45 1>;
+		assigned-clock-parents = <&k3_clks 45 2>;
+		power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 46 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 46 1>;
+		assigned-clock-parents = <&k3_clks 46 2>;
+		power-domains = <&k3_pds 46 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 47 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 47 1>;
+		assigned-clock-parents = <&k3_clks 47 2>;
+		power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_esm: esm@420000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x420000 0x00 0x1000>;
+		ti,esm-pins = <160>, <161>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 0>;
+		dmas = <&main_pktdma 0xc300 0>, <&main_pktdma 0x4300 0>;
+		dma-names = "tx0", "rx0";
+		status = "disabled";
+	};
+
+	main_spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@20130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20130000 0x00 0x400>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 144 0>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@20140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20140000 0x00 0x400>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 145 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 145 0>;
+		status = "disabled";
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <3>;
+		ti,interrupt-ranges = <0 32 16>;
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <190>, <191>, <192>,
+			     <193>, <194>, <195>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <87>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <180>, <181>, <182>,
+			     <183>, <184>, <185>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <88>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+	};
+
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am64-sdhci-8bit";
+		reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 57 0>, <&k3_clks 57 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x7>;
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,am64-sdhci-4bit";
+		reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,clkbuf-sel = <0x7>;
+	};
+
+	cpsw3g: ethernet@8000000 {
+		compatible = "ti,am642-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x8000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>;
+		clocks = <&k3_clks 13 0>;
+		assigned-clocks = <&k3_clks 13 1>;
+		assigned-clock-parents = <&k3_clks 13 9>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_pktdma 0xC500 15>,
+		       <&main_pktdma 0xC501 15>,
+		       <&main_pktdma 0xC502 15>,
+		       <&main_pktdma 0xC503 15>,
+		       <&main_pktdma 0xC504 15>,
+		       <&main_pktdma 0xC505 15>,
+		       <&main_pktdma 0xC506 15>,
+		       <&main_pktdma 0xC507 15>,
+		       <&main_pktdma 0x4500 15>;
+		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+			    "tx7", "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel 1>;
+				mac-address = [00 00 00 00 00 00];
+				ti,syscon-efuse = <&main_conf 0x200>;
+			};
+
+			cpsw_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				phys = <&phy_gmii_sel 2>;
+				mac-address = [00 00 00 00 00 00];
+			};
+		};
+
+		cpsw3g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 13 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 13 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	main_cpts0: cpts@39000000 {
+		compatible = "ti,j721e-cpts";
+		reg = <0x0 0x39000000 0x0 0x400>;
+		reg-names = "cpts";
+		power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 84 0>;
+		clock-names = "cpts";
+		assigned-clocks = <&k3_clks 84 0>;
+		assigned-clock-parents = <&k3_clks 84 8>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "cpts";
+		ti,cpts-periodic-outputs = <6>;
+		ti,cpts-ext-ts-inputs = <8>;
+	};
+
+	timesync_router: pinctrl@a40000 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0xa40000 0x0 0x800>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x000107ff>;
+	};
+
+	usbss0: cdns-usb@f900000 {
+		compatible = "ti,am64-usb";
+		reg = <0x00 0xf900000 0x00 0x100>;
+		power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 161 9>, <&k3_clks 161 1>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 161 9>; /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 161 10>; /* HF0SC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		usb0: usb@f400000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0xf400000 0x00 0x10000>,
+			      <0x00 0xf410000 0x00 0x10000>,
+			      <0x00 0xf420000 0x00 0x10000>;
+			reg-names = "otg",
+				    "xhci",
+				    "dev";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	tscadc0: tscadc@28001000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x00 0x28001000 0x00 0x1000>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 0>;
+		assigned-clock-parents = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	fss: bus@fc00000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x0fc00000 0x00 0x70000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@fc40000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x0fc40000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&k3_clks 75 6>;
+			assigned-clocks = <&k3_clks 75 6>;
+			assigned-clock-parents = <&k3_clks 75 7>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+			status = "disabled";
+		};
+	};
+
+	hwspinlock: spinlock@2a000000 {
+		compatible = "ti,am64-hwspinlock";
+		reg = <0x00 0x2a000000 0x00 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	mailbox0_cluster2: mailbox@29020000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29020000 0x00 0x200>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster3: mailbox@29030000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29030000 0x00 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster4: mailbox@29040000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29040000 0x00 0x200>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster5: mailbox@29050000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29050000 0x00 0x200>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster6: mailbox@29060000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29060000 0x00 0x200>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster7: mailbox@29070000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29070000 0x00 0x200>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	main_r5fss0: r5fss@78000000 {
+		compatible = "ti,am64-r5fss";
+		ti,cluster-mode = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x10000>,
+			 <0x78100000 0x00 0x78100000 0x10000>,
+			 <0x78200000 0x00 0x78200000 0x08000>,
+			 <0x78300000 0x00 0x78300000 0x08000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am64-r5f";
+			reg = <0x78000000 0x00010000>,
+			      <0x78100000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am64-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@78200000 {
+			compatible = "ti,am64-r5f";
+			reg = <0x78200000 0x00008000>,
+			      <0x78300000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <122>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 122 1>;
+			firmware-name = "am64-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@78400000 {
+		compatible = "ti,am64-r5fss";
+		ti,cluster-mode = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78400000 0x00 0x78400000 0x10000>,
+			 <0x78500000 0x00 0x78500000 0x10000>,
+			 <0x78600000 0x00 0x78600000 0x08000>,
+			 <0x78700000 0x00 0x78700000 0x08000>;
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@78400000 {
+			compatible = "ti,am64-r5f";
+			reg = <0x78400000 0x00010000>,
+			      <0x78500000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <123>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 123 1>;
+			firmware-name = "am64-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@78600000 {
+			compatible = "ti,am64-r5f";
+			reg = <0x78600000 0x00008000>,
+			      <0x78700000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <124>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 124 1>;
+			firmware-name = "am64-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	serdes_wiz0: wiz@f000000 {
+		compatible = "ti,am64-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <1>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
+
+		assigned-clocks = <&k3_clks 162 1>;
+		assigned-clock-parents = <&k3_clks 162 5>;
+
+		serdes0: serdes@f000000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x0f000000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 162 1>,
+						 <&k3_clks 162 1>,
+						 <&k3_clks 162 1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+		};
+	};
+
+	pcie0_rc: pcie@f102000 {
+		compatible = "ti,am64-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x0f102000 0x00 0x1000>,
+		      <0x00 0x0f100000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x68000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+		max-link-speed = <2>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>;
+		clock-names = "fck", "pcie_refclk";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		cdns,no-bar-match-nbits = <64>;
+		vendor-id = <0x104c>;
+		device-id = <0xb010>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
+			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>;
+		status = "disabled";
+	};
+
+	pcie0_ep: pcie-ep@f102000 {
+		compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x0f102000 0x00 0x1000>,
+		      <0x00 0x0f100000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x68000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+		max-link-speed = <2>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <1>;
+		status = "disabled";
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23000000 0x0 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23010000 0x0 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23020000 0x0 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm3: pwm@23030000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23030000 0x0 0x100>;
+		power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 3>, <&k3_clks 89 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm4: pwm@23040000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23040000 0x0 0x100>;
+		power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 4>, <&k3_clks 90 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm5: pwm@23050000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23050000 0x0 0x100>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 5>, <&k3_clks 91 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm6: pwm@23060000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23060000 0x0 0x100>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 6>, <&k3_clks 92 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm7: pwm@23070000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23070000 0x0 0x100>;
+		power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 7>, <&k3_clks 93 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm8: pwm@23080000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23080000 0x0 0x100>;
+		power-domains = <&k3_pds 94 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 8>, <&k3_clks 94 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ecap0: pwm@23100000 {
+		compatible = "ti,am64-ecap", "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23100000 0x0 0x60>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 51 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap1: pwm@23110000 {
+		compatible = "ti,am64-ecap", "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23110000 0x0 0x60>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 52 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap2: pwm@23120000 {
+		compatible = "ti,am64-ecap", "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23120000 0x0 0x60>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 53 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_rti0: watchdog@e000000 {
+			compatible = "ti,j7-rti-wdt";
+			reg = <0x00 0xe000000 0x00 0x100>;
+			clocks = <&k3_clks 125 0>;
+			power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+			assigned-clocks = <&k3_clks 125 0>;
+			assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+			compatible = "ti,j7-rti-wdt";
+			reg = <0x00 0xe010000 0x00 0x100>;
+			clocks = <&k3_clks 126 0>;
+			power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+			assigned-clocks = <&k3_clks 126 0>;
+			assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	icssg0: icssg@30000000 {
+		compatible = "ti,am642-icssg";
+		reg = <0x00 0x30000000 0x00 0x80000>;
+		power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x30000000 0x80000>;
+
+		icssg0_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1", "shrdram2";
+		};
+
+		icssg0_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg0_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 81 0>,  /* icssg0_core_clk */
+						 <&k3_clks 81 20>; /* icssg0_iclk */
+					assigned-clocks = <&icssg0_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 81 20>;
+				};
+
+				icssg0_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 81 3>,	/* icssg0_iep_clk */
+						 <&icssg0_coreclk_mux>;	/* icssg0_coreclk_mux */
+					assigned-clocks = <&icssg0_iepclk_mux>;
+					assigned-clock-parents = <&icssg0_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg0_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg0_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg0_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru0_0: pru@34000 {
+			compatible = "ti,am642-pru";
+			reg = <0x34000 0x3000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-pru0_0-fw";
+		};
+
+		rtu0_0: rtu@4000 {
+			compatible = "ti,am642-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-rtu0_0-fw";
+		};
+
+		tx_pru0_0: txpru@a000 {
+			compatible = "ti,am642-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-txpru0_0-fw";
+		};
+
+		pru0_1: pru@38000 {
+			compatible = "ti,am642-pru";
+			reg = <0x38000 0x3000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-pru0_1-fw";
+		};
+
+		rtu0_1: rtu@6000 {
+			compatible = "ti,am642-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-rtu0_1-fw";
+		};
+
+		tx_pru0_1: txpru@c000 {
+			compatible = "ti,am642-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-txpru0_1-fw";
+		};
+
+		icssg0_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 62 3>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	icssg1: icssg@30080000 {
+		compatible = "ti,am642-icssg";
+		reg = <0x00 0x30080000 0x00 0x80000>;
+		power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x30080000 0x80000>;
+
+		icssg1_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1", "shrdram2";
+		};
+
+		icssg1_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg1_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 82 0>,   /* icssg1_core_clk */
+						 <&k3_clks 82 20>;  /* icssg1_iclk */
+					assigned-clocks = <&icssg1_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 82 20>;
+				};
+
+				icssg1_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 82 3>,	/* icssg1_iep_clk */
+						 <&icssg1_coreclk_mux>;	/* icssg1_coreclk_mux */
+					assigned-clocks = <&icssg1_iepclk_mux>;
+					assigned-clock-parents = <&icssg1_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg1_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg1_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg1_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru1_0: pru@34000 {
+			compatible = "ti,am642-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-pru1_0-fw";
+		};
+
+		rtu1_0: rtu@4000 {
+			compatible = "ti,am642-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-rtu1_0-fw";
+		};
+
+		tx_pru1_0: txpru@a000 {
+			compatible = "ti,am642-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-txpru1_0-fw";
+		};
+
+		pru1_1: pru@38000 {
+			compatible = "ti,am642-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-pru1_1-fw";
+		};
+
+		rtu1_1: rtu@6000 {
+			compatible = "ti,am642-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-rtu1_1-fw";
+		};
+
+		tx_pru1_1: txpru@c000 {
+			compatible = "ti,am642-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-txpru1_1-fw";
+		};
+
+		icssg1_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 82 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	main_mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 5>, <&k3_clks 98 0>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@20711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20711000 0x00 0x200>,
+		      <0x00 0x20718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 99 5>, <&k3_clks 99 0>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	crypto: crypto@40900000 {
+		compatible = "ti,am64-sa2ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		power-domains = <&k3_pds 133 TI_SCI_PD_SHARED>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+		dmas = <&main_pktdma 0xc001 0>, <&main_pktdma 0x4002 0>,
+		       <&main_pktdma 0x4003 0>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@40910000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x40910000 0x00 0x7d>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled"; /* Used by OP-TEE */
+		};
+	};
+
+	gpmc0: memory-controller@3b000000 {
+		compatible = "ti,am64-gpmc";
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 80 0>;
+		clock-names = "fck";
+		reg = <0x00 0x3b000000 0x00 0x400>,
+		      <0x00 0x50000000 0x00 0x8000000>;
+		reg-names = "cfg", "data";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		gpmc,num-cs = <3>;
+		gpmc,num-waitpins = <2>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "disabled";
+	};
+
+	elm0: ecc@25010000 {
+		compatible = "ti,am64-elm";
+		reg = <0x00 0x25010000 0x00 0x2000>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 54 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
new file mode 100644
index 0000000000..686d497907
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM64 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@4800000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4800000 0x00 0x400>;
+		clocks = <&k3_clks 35 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@4810000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4810000 0x00 0x400>;
+		clocks = <&k3_clks 48 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@4820000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4820000 0x00 0x400>;
+		clocks = <&k3_clks 49 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@4830000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4830000 0x00 0x400>;
+		clocks = <&k3_clks 50 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_uart0: serial@4a00000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_uart1: serial@4a10000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a10000 0x00 0x100>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 160 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@4900000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04900000 0x00 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@4910000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04910000 0x00 0x100>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@4b00000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x04b00000 0x00 0x400>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 147 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@4b10000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x04b10000 0x00 0x400>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 148 0>;
+		status = "disabled";
+	};
+
+	mcu_gpio_intr: interrupt-controller@4210000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x04210000 0x00 0x200>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <5>;
+		ti,interrupt-ranges = <0 104 4>;
+	};
+
+	mcu_gpio0: gpio@4201000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x4201000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&mcu_gpio_intr>;
+		interrupts = <30>, <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <23>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 79 0>;
+		clock-names = "gpio";
+	};
+
+	mcu_pmx0: pinctrl@4084000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x4084000 0x00 0x84>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_esm: esm@4100000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x4100000 0x00 0x1000>;
+		ti,esm-pins = <0>, <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
new file mode 100644
index 0000000000..1c2c8f0dac
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com
+ * Author: Matt McKee <mmckee@phytec.com>
+ *
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phycore-am64x
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "PHYTEC phyCORE-AM64x";
+	compatible = "phytec,am64-phycore-som", "ti,am642";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		mmc0 = &sdhci0;
+		rtc0 = &i2c_som_rtc;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+	};
+
+	vcc_5v0_som: regulator-vcc-5v0-som {
+		/* VIN / VCC_5V0_SOM */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0_SOM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	cpsw_mdio_pins_default: cpsw-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4)	/* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4)	/* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x0100, PIN_OUTPUT, 7)	/* (V7) PRG1_PRU0_GPO18.GPIO0_63 */
+		>;
+	};
+
+	cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0184, PIN_INPUT, 4)	/* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0188, PIN_INPUT, 4)	/* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4)	/* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4)	/* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x01cc, PIN_INPUT, 4)	/* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4)	/* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x01d4, PIN_INPUT, 4)	/* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4)	/* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x01d8, PIN_INPUT, 4)	/* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4)	/* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x01f4, PIN_INPUT, 4)	/* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4)	/* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x0154, PIN_INPUT, 7)	/* (V12) PRG1_PRU1_GPO19.GPIO0_84 */
+		>;
+	};
+
+	eeprom_wp_pins_default: eeprom-wp-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0208, PIN_OUTPUT, 7)	/* (D12) SPI0_CS0.GPIO1_42 */
+		>;
+	};
+
+	leds_pins_default: leds-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0030, PIN_OUTPUT, 7)	/* (L18) OSPI0_CSn1.GPIO0_12 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0260, PIN_INPUT, 0)	/* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT, 0)	/* (B18) I2C0_SDA */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0)	/* (N20) OSPI0_CLK */
+			AM64X_IOPAD(0x0008, PIN_INPUT, 0)	/* (N19) OSPI0_DQS */
+			AM64X_IOPAD(0x000c, PIN_INPUT, 0)	/* (M19) OSPI0_D0 */
+			AM64X_IOPAD(0x0010, PIN_INPUT, 0)	/* (M18) OSPI0_D1 */
+			AM64X_IOPAD(0x0014, PIN_INPUT, 0)	/* (M20) OSPI0_D2 */
+			AM64X_IOPAD(0x0018, PIN_INPUT, 0)	/* (M21) OSPI0_D3 */
+			AM64X_IOPAD(0x001c, PIN_INPUT, 0)	/* (P21) OSPI0_D4 */
+			AM64X_IOPAD(0x0020, PIN_INPUT, 0)	/* (P20) OSPI0_D5 */
+			AM64X_IOPAD(0x0024, PIN_INPUT, 0)	/* (N18) OSPI0_D6 */
+			AM64X_IOPAD(0x0028, PIN_INPUT, 0)	/* (M17) OSPI0_D7 */
+			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0)	/* (L19) OSPI0_CSn0 */
+		>;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_rgmii1_pins_default>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_mdio_pins_default>;
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <1000>;
+		reset-deassert-us = <1000>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		pinctrl-names = "default";
+		pinctrl-0 = <&eeprom_wp_pins_default>;
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	i2c_som_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+	};
+};
+
+&sdhci0 {
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	keep-power-in-suspend;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
new file mode 100644
index 0000000000..036db56ba7
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&main_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&main_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso
new file mode 100644
index 0000000000..79ed19c6c0
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&sdhci1 {
+	vmmc-supply = <&reg_sd>;
+	no-sdio;
+	status = "okay";
+};
+
+&main_gpio0 {
+	line43-hog {
+		gpio-hog;
+		gpios = <43 0>;
+		line-name = "MMC1_CTRL";
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso
new file mode 100644
index 0000000000..32596a84b7
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&sdhci1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-sd;
+	status = "okay";
+};
+
+&main_gpio0 {
+	line43-hog {
+		gpio-hog;
+		gpios = <43 0>;
+		line-name = "MMC1_CTRL";
+		output-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
new file mode 100644
index 0000000000..8e9c2bc70f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM642 SoC Family
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM642 SoC";
+	compatible = "ti,am642";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f4000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x00000100>, /* Main RTI0 */
+			 <0x00 0x0e010000 0x00 0x0e010000 0x00 0x00000100>, /* Main RTI1 */
+			 <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x000bc100>, /* ICSSG0/1 */
+			 <0x00 0x37000000 0x00 0x37000000 0x00 0x00040000>, /* TIMERMGR0 TIMERS */
+			 <0x00 0x39000000 0x00 0x39000000 0x00 0x00000400>, /* CPTS0 */
+			 <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */
+			 <0x00 0x3cd00000 0x00 0x3cd00000 0x00 0x00000200>, /* TIMERMGR0_CONFIG */
+			 <0x00 0x3f004000 0x00 0x3f004000 0x00 0x00000400>, /* GICSS0_REGS */
+			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA2_UL0 */
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* CTRL_MMR0 */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMASS */
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>;
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
+		};
+	};
+
+	#include "k3-am64-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am64-main.dtsi"
+#include "k3-am64-mcu.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
new file mode 100644
index 0000000000..b4a1f73d4f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am642.dtsi"
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,am642-evm", "ti,am642";
+	model = "Texas Instruments AM642 EVM";
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	aliases {
+		serial0 = &mcu_uart0;
+		serial1 = &main_uart1;
+		serial2 = &main_uart0;
+		serial3 = &main_uart3;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a5000000 {
+			reg = <0x00 0xa5000000 0x00 0x00800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	evm_12v0: regulator-0 {
+		/* main DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-1 {
+		/* output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-2 {
+		/* output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS2051BD */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	vddb: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddb_3v3_display";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_supply: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ddr_vtt_pins_default>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vsys_3v3>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "am64-evm:red:heartbeat";
+			gpios = <&exp1 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+
+	mdio_mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	mdio-mux-1 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mdio_mux>;
+		mdio-parent-bus = <&cpsw3g_mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@1 {
+			reg = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw3g_phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
+
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&main_pmx0 {
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
+			AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0248, PIN_INPUT, 0)		/* (D16) UART1_CTSn */
+			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0)		/* (E16) UART1_RTSn */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0)		/* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0)		/* (E14) UART1_TXD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
+			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
+		>;
+	};
+
+	main_spi0_pins_default: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */
+			AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */
+			AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */
+			AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
+			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
+		>;
+	};
+
+	mdio1_pins_default: mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
+			AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
+			AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
+			AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
+			AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
+			AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+		>;
+	};
+
+       rgmii2_pins_default: rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
+			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+
+	main_usb0_pins_default: main-usb0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
+			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
+			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
+			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
+			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
+			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
+			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
+			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
+			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
+			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
+			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
+		>;
+	};
+
+	main_ecap0_pins_default: main-ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
+		>;
+	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */
+			AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */
+		>;
+	};
+
+	main_mcan1_pins_default: main-mcan1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */
+			AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */
+		>;
+	};
+
+	ddr_vtt_pins_default: ddr-vtt-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
+		>;
+	};
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	current-speed = <115200>;
+};
+
+/* main_uart1 is reserved for firmware usage */
+&main_uart1 {
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* AT24CM01 */
+		compatible = "atmel,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL",
+				  "GPIO_CPSW1_RST", "GPIO_RGMII1_RST",
+				  "GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT",
+				  "MMC1_SD_EN", "FSI_FET_SEL",
+				  "MCAN0_STB_3V3", "MCAN1_STB_3V3",
+				  "CPSW_FET_SEL", "CPSW_FET2_SEL",
+				  "PRG1_RGMII2_FET_SEL", "TEST_GPIO2",
+				  "GPIO_OLED_RESETn", "VPP_LDO_EN",
+				  "TEST_LED1", "TP92", "TP90", "TP88",
+				  "TP87", "TP86", "TP89", "TP91";
+	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&vddb>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
+};
+
+/* mcu_gpio0 is reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&main_spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi0_pins_default>;
+	ti,pindir-d0-out-d1-in;
+	eeprom@0 {
+		compatible = "microchip,93lc46b";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cs-high;
+		data-size = <16>;
+	};
+};
+
+&sdhci0 {
+	/* emmc */
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb0_pins_default>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy3>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&tscadc0 {
+	/* ADC is reserved for R5 usage */
+	status = "reserved";
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "ospi.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "ospi.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "ospi.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@740000 {
+				label = "ospi.env.backup";
+				reg = <0x740000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster6 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&pcie0_rc {
+	status = "okay";
+	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie0_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&ecap0 {
+	status = "okay";
+	/* PWM is available on Pin 1 of header J12 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap0_pins_default>;
+};
+
+&main_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&main_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
new file mode 100644
index 0000000000..9175e96842
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com
+ * Author: Matt McKee <mmckee@phytec.com>
+ *
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phyboard-am64x
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/phy/phy.h>
+#include "k3-am642.dtsi"
+#include "k3-am64-phycore-som.dtsi"
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "phytec,am642-phyboard-electra-rdk",
+		     "phytec,am64-phycore-som", "ti,am642";
+	model = "PHYTEC phyBOARD-Electra-AM64x RDK";
+
+	aliases {
+		mmc1 = &sdhci1;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	can_tc1: can-phy0 {
+		compatible = "ti,tcan1042";
+		pinctrl-names = "default";
+		pinctrl-0 = <&can_tc1_pins_default>;
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
+	};
+
+	can_tc2: can-phy1 {
+		compatible = "ti,tcan1042";
+		pinctrl-names = "default";
+		pinctrl-0 = <&can_tc2_pins_default>;
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins_default>;
+
+		key-home {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		key-menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
+
+		led-1 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			function = LED_FUNCTION_DISK;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			function = LED_FUNCTION_DISK;
+		};
+	};
+
+	vcc_3v3_mmc: regulator-sd {
+		/* TPS22963C */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_MMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&main_pmx0 {
+	can_tc1_pins_default: can-tc1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0084, PIN_OUTPUT, 7)	/* (P16) GPMC0_ADVn_ALE.GPIO0_32 */
+		>;
+	};
+
+	can_tc2_pins_default: can-tc2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0090, PIN_OUTPUT, 7)	/* (P17) GPMC0_BE0n_CLE.GPIO0_35 */
+		>;
+	};
+
+	gpio_keys_pins_default: gpio-keys-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0044, PIN_INPUT, 7)	/* (T18) GPMC0_AD2.GPIO0_17 */
+			AM64X_IOPAD(0x0054, PIN_INPUT, 7)	/* (V20) GPMC0_AD6.GPIO0_21 */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0268, PIN_INPUT, 0)	/* (C18) I2C1_SCL */
+			AM64X_IOPAD(0x026c, PIN_INPUT, 0)	/* (B19) I2C1_SDA */
+		>;
+	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0250, PIN_OUTPUT, 0)	/* (A17) MCAN0_TX */
+			AM64X_IOPAD(0x0254, PIN_INPUT, 0)	/* (B17) MCAN0_RX */
+		>;
+	};
+
+	main_mcan1_pins_default: main-mcan1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0258, PIN_OUTPUT, 0)	/* (C17) MCAN1_TX */
+			AM64X_IOPAD(0x025c, PIN_INPUT, 0)	/* (D17) MCAN1_RX */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0)	/* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0)	/* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0)	/* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0)	/* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0)	/* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0)		/* MMC1_CLKLB */
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0)	/* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0)	/* (D19) MMC1_SDCD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0)	/* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)	/* (C16) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0248, PIN_INPUT, 0)	/* (D16) UART1_CTSn */
+			AM64X_IOPAD(0x024C, PIN_OUTPUT, 0)	/* (E16) UART1_RTSn */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0)	/* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0)	/* (E14) UART1_TXD */
+		>;
+	};
+
+	main_usb0_pins_default: main-usb0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0)	/* (E19) USB0_DRVVBUS */
+		>;
+	};
+
+	pcie_usb_sel_pins_default: pcie-usb-sel-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x017c, PIN_OUTPUT, 7)	/* (T1) PRG0_PRU0_GPO7.GPIO1_7 */
+		>;
+	};
+
+	pcie0_pins_default: pcie0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0098, PIN_OUTPUT, 7)	/* (W19) GPMC0_WAIT0.GPIO0_37 */
+		>;
+	};
+
+	user_leds_pins_default: user-leds-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x003c, PIN_OUTPUT, 7)	/* (T20) GPMC0_AD0.GPIO0_15 */
+			AM64X_IOPAD(0x0040, PIN_OUTPUT, 7)	/* (U21) GPMC0_AD1.GPIO0_16 */
+		>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x51>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-3 {
+			label = "red:user";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-4 {
+			label = "green:user";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-5 {
+			label = "blue:user";
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&main_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&can_tc1>;
+};
+
+&main_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_pins_default>;
+	phys = <&can_tc2>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	current-speed = <115200>;
+};
+
+&main_uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	uart-has-rtscts;
+	current-speed = <115200>;
+};
+
+&sdhci1 {
+	vmmc-supply = <&vcc_3v3_mmc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	bus-width = <4>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	no-1-8-v;
+};
+
+&serdes0 {
+	serdes0_pcie_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&usbss0 {
+	ti,vbus-divider;
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb0_pins_default>;
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_pcie_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
new file mode 100644
index 0000000000..722fd285a3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -0,0 +1,642 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/leds/common.h>
+#include "k3-am642.dtsi"
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,am642-sk", "ti,am642";
+	model = "Texas Instruments AM642 SK";
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	aliases {
+		serial0 = &mcu_uart0;
+		serial1 = &main_uart1;
+		serial2 = &main_uart0;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a5000000 {
+			reg = <0x00 0xa5000000 0x00 0x00800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	vusb_main: regulator-0 {
+		/* USB MAIN INPUT 5V DC */
+		compatible = "regulator-fixed";
+		regulator-name = "vusb_main5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-1 {
+		/* output of LP8733xx */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-2 {
+		/* TPS2051BD */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	com8_ls_en: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "com8_ls_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		pinctrl-0 = <&main_com8_ls_en_pins_default>;
+		pinctrl-names = "default";
+		gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>;
+	};
+
+	wlan_en: regulator-4 {
+		/* output of SN74AVC4T245RSVR */
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		pinctrl-0 = <&main_wlan_en_pins_default>;
+		pinctrl-names = "default";
+		vin-supply = <&com8_ls_en>;
+		gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&exp2 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			gpios = <&exp2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <4>;
+			gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>;
+			gpios = <&exp2 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <6>;
+			gpios = <&exp2 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <7>;
+			gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-7 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <8>;
+			linux,default-trigger = "heartbeat";
+			gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&main_pmx0 {
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */
+			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
+			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
+			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
+		>;
+	};
+
+	main_usb0_pins_default: main-usb0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
+			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
+		>;
+	};
+
+	mdio1_pins_default: mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */
+			AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */
+			AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */
+			AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */
+			AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */
+			AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+		>;
+	};
+
+       rgmii2_pins_default: rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
+			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
+			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
+			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
+			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
+			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
+			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
+			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
+			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
+			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
+			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
+			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
+		>;
+	};
+
+	main_ecap0_pins_default: main-ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
+		>;
+	};
+	main_wlan_en_pins_default: main-wlan-en-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */
+		>;
+	};
+
+	main_com8_ls_en_pins_default: main-com8-ls-en-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */
+		>;
+	};
+
+	main_wlan_pins_default: main-wlan-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
+		>;
+	};
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	current-speed = <115200>;
+};
+
+&main_uart1 {
+	/* main_uart1 is reserved for firmware usage */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				  "PRU_DETECT", "MMC1_SD_EN",
+				  "VPP_LDO_EN", "RPI_PS_3V3_En",
+				  "RPI_PS_5V0_En", "RPI_HAT_DETECT";
+	};
+
+	exp2: gpio@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
+	};
+};
+
+/* mcu_gpio0 is reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&sdhci0 {
+	vmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	ti,driver-strength-ohm = <50>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		pinctrl-0 = <&main_wlan_pins_default>;
+		pinctrl-names = "default";
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <46 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&serdes0 {
+	serdes0_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&usbss0 {
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb0_pins_default>;
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "ospi.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "ospi.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "ospi.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@740000 {
+				label = "ospi.env.backup";
+				reg = <0x740000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster6 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&ecap0 {
+	status = "okay";
+	/* PWM is available on Pin 1 of header J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap0_pins_default>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
new file mode 100644
index 0000000000..04c15b64f0
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -0,0 +1,872 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "k3-serdes.h"
+
+#include "k3-am642-tqma64xxl.dtsi"
+
+/ {
+	compatible = "tq,am642-tqma6442l-mbax4xxl", "tq,am642-tqma6442l",
+		     "ti,am642";
+	model = "TQ-Systems TQMa64xxL SoM on MBax4xxL carrier board";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		i2c1 = &mcu_i2c0;
+		mmc1 = &sdhci1;
+		serial0 = &mcu_uart0;
+		serial1 = &mcu_uart1;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart4;
+		serial6 = &main_uart5;
+		serial7 = &main_uart3;
+		spi1 = &main_spi0;
+		spi2 = &mcu_spi0;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_gpio_keys_pins>;
+
+		user-button {
+			label = "USER_BUTTON";
+			linux,code = <BTN_0>;
+			gpios = <&mcu_gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_gpio_leds_pins>;
+
+		led-0 {
+			label = "led0";
+			gpios = <&mcu_gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+		led-1 {
+			label = "led1";
+			gpios = <&mcu_gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_fan_pins>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&epwm5 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <49 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mmc1_wifi_pwrseq_pins>;
+		reset-gpios = <&main_gpio0 23 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_fan_reg_pins>;
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&main_gpio1 48 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sd: regulator-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mmc1_reg_pins>;
+		regulator-name = "V_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio1 43 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_pins>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_mdio_pins>;
+	status = "okay";
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&main_gpio0 44 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <1000>;
+		reset-deassert-us = <1000>;
+		ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&epwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&epwm5_pins>;
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_gpio0_digital_pins>,
+		    <&main_gpio0_hog_pins>;
+	gpio-line-names =
+		"", "", "", "", /* 0-3 */
+		"", "", "", "", /* 4-7 */
+		"", "", "", "", /* 8-11 */
+		"", "", "", "", /* 12-15 */
+		"", "", "", "", /* 16-19 */
+		"", "", "", "", /* 20-23 */
+		"", "", "EN_DIG_OUT_1", "STATUS_OUT_1", /* 24-27 */
+		"EN_DIG_OUT_2", "STATUS_OUT_2", "EN_SIG_OUT_3", "", /* 28-31 */
+		"", "", "STATUS_OUT_3", "EN_DIG_OUT_4", /* 32-35 */
+		"", "", "STATUS_OUT_4", "DIG_IN_1", /* 36-39 */
+		"DIG_IN_2", "DIG_IN_3", "DIG_IN_4"; /* 40- */
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_gpio1_hog_pins>;
+	gpio-line-names =
+		"", "", "", "", /* 0-3 */
+		"", "", "", "", /* 4-7 */
+		"", "", "", "", /* 8-11 */
+		"", "", "", "", /* 12-15 */
+		"", "", "", "", /* 16-19 */
+		"", "", "", "", /* 20-23 */
+		"", "", "", "", /* 24-27 */
+		"", "", "", "", /* 28-31 */
+		"", "", "", "", /* 32-35 */
+		"", "", "", "", /* 36-39 */
+		"", "", "", "", /* 40-43 */
+		"", "", "", "", /* 44-47 */
+		"", "", "", "", /* 48-51 */
+		"", "", "", "ADC_SYNC", /* 52-55 */
+		"", "", "ADC_RST#", "ADC_DATA_RDY", /* 56-59 */
+		"", "", "", "", /* 60-63 */
+		"", "", "", "ADC_INT#", /* 64-67 */
+		"BG95_PWRKEY", "BG95_RESET"; /* 68- */
+
+	line50-hog {
+		/* See also usb0 */
+		gpio-hog;
+		gpios = <50 0>;
+		line-name = "USB0_VBUS_OC#";
+		input;
+	};
+
+	line54-hog {
+		gpio-hog;
+		gpios = <54 0>;
+		line-name = "PRG0_MDIO_SWITCH";
+		output-low;
+	};
+
+	line70-hog {
+		gpio-hog;
+		gpios = <70 0>;
+		line-name = "PHY_INT#";
+		input;
+	};
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins>;
+	status = "okay";
+};
+
+&main_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_pins>;
+	status = "okay";
+};
+
+&main_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi0_pins>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	/* adc@0: NXP NAFE13388 */
+};
+
+/* UART/USB adapter port 1 */
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins>;
+	status = "okay";
+};
+
+/*
+ * IOT Module - GNSS UART
+ *
+ * Note: We expect usage of a SYSFW that does not reserve UART1 for debug traces
+ */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins>;
+	status = "okay";
+};
+
+/* RS485 port */
+&main_uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart2_pins>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	status = "okay";
+};
+
+/* Bluetooth module */
+&main_uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart3_pins>;
+	/*
+	 * Left disabled for now, until a way to deal with drivers and firmware
+	 * for the combined WLAN/BT module has been figured out
+	 */
+};
+
+/* IOT module - Main UART */
+&main_uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart4_pins>;
+	status = "okay";
+};
+
+/* IOT module - DBG UART */
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart5_pins>;
+	status = "okay";
+};
+
+&main0_thermal {
+	trips {
+		main0_active0: trip-active0 {
+			temperature = <40000>;
+			hysteresis = <5000>;
+			type = "active";
+		};
+
+		main0_active1: trip-active1 {
+			temperature = <48000>;
+			hysteresis = <3000>;
+			type = "active";
+		};
+
+		main0_active2: trip-active2 {
+			temperature = <60000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&main0_active0>;
+			cooling-device = <&fan0 1 1>;
+		};
+
+		map2 {
+			trip = <&main0_active1>;
+			cooling-device = <&fan0 2 2>;
+		};
+
+		map3 {
+			trip = <&main0_active2>;
+			cooling-device = <&fan0 3 3>;
+		};
+	};
+};
+
+&main1_thermal {
+	trips {
+		main1_active0: trip-active0 {
+			temperature = <40000>;
+			hysteresis = <5000>;
+			type = "active";
+		};
+
+		main1_active1: trip-active1 {
+			temperature = <48000>;
+			hysteresis = <3000>;
+			type = "active";
+		};
+
+		main1_active2: trip-active2 {
+			temperature = <60000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&main1_active0>;
+			cooling-device = <&fan0 1 1>;
+		};
+
+		map2 {
+			trip = <&main1_active1>;
+			cooling-device = <&fan0 2 2>;
+		};
+
+		map3 {
+			trip = <&main1_active2>;
+			cooling-device = <&fan0 3 3>;
+		};
+	};
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_gpio0_pins>;
+};
+
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins>;
+	/* Left disabled: not functional without external pullup */
+};
+
+&mcu_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_spi0_pins>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+};
+
+/* UART/USB adapter port 2 */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins>;
+	status = "okay";
+};
+
+/* Pin header */
+&mcu_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart1_pins>;
+	status = "okay";
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&serdes0 {
+	serdes0_usb_link: phy@0 {
+		reg = <0>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 1>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+	};
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&main_gpio1 77 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	ti,driver-strength-ohm = <50>;
+	ti,fails-without-test-cd;
+	/* Enabled by overlay */
+	status = "disabled";
+};
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&usb0 {
+	/*
+	 * The CDNS USB driver currently doesn't support overcurrent GPIOs,
+	 * so there is no overcurrent detection. The OC pin is configured
+	 * as a GPIO hog instead.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb0_pins>;
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+};
+
+&main_pmx0 {
+	cpsw_pins: cpsw-pins {
+		pinctrl-single,pins = <
+			/* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
+			AM64X_IOPAD(0x01cc, PIN_INPUT, 4)
+			/* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
+			AM64X_IOPAD(0x01d4, PIN_INPUT, 4)
+			/* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
+			AM64X_IOPAD(0x01d8, PIN_INPUT, 4)
+			/* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
+			AM64X_IOPAD(0x01f4, PIN_INPUT, 4)
+			/* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
+			AM64X_IOPAD(0x0188, PIN_INPUT, 4)
+			/* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0184, PIN_INPUT, 4)
+			/* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4)
+			/* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4)
+			/* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4)
+			/* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4)
+			/* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4)
+			/* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4)
+		>;
+	};
+
+	cpsw_mdio_pins: cpsw-mdio-pins {
+		pinctrl-single,pins = <
+			/* (R21) GPMC0_CSn3.GPIO0_44 - RESET_RGMII1# */
+			AM64X_IOPAD(0x00b4, PIN_OUTPUT, 7)
+
+			/* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4)
+			/* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4)
+		>;
+	};
+
+	epwm5_pins: epwm5-pins {
+		pinctrl-single,pins = <
+			/* (W19) GPMC0_WAIT0.EHRPWM5_B */
+			AM64X_IOPAD(0x0098, PIN_OUTPUT, 3)
+		>;
+	};
+
+	/* Digital IOs */
+	main_gpio0_digital_pins: main-gpio0-digital-pins {
+		pinctrl-single,pins = <
+			/* (W20) GPMC0_AD11.GPIO0_26 - EN_DIG_OUT_1 */
+			AM64X_IOPAD(0x0068, PIN_OUTPUT, 7)
+			/* (W21) GPMC0_AD12.GPIO0_27 - STATUS_OUT_1 */
+			AM64X_IOPAD(0x006c, PIN_INPUT, 7)
+			/* (V18) GPMC0_AD13.GPIO0_28 - EN_DIG_OUT_2 */
+			AM64X_IOPAD(0x0070, PIN_OUTPUT, 7)
+			/* (Y21) GPMC0_AD14.GPIO0_29 - STATUS_OUT_2 */
+			AM64X_IOPAD(0x0074, PIN_INPUT, 7)
+			/* (Y20) GPMC0_AD15.GPIO0_30 - EN_DIG_OUT_3 */
+			AM64X_IOPAD(0x0078, PIN_OUTPUT, 7)
+			/* (T21) GPMC0_WEn.GPIO0_34 - STATUS_OUT_3 */
+			AM64X_IOPAD(0x008c, PIN_INPUT, 7)
+			/* (P17) GPMC0_BE0n_CLE.GPIO0_35 - EN_DIG_OUT_4 */
+			AM64X_IOPAD(0x0090, PIN_OUTPUT, 7)
+			/* (Y18) GPMC0_WAIT1.GPIO0_38 - STATUS_OUT_4 */
+			AM64X_IOPAD(0x009c, PIN_INPUT, 7)
+			/* (N16) GPMC0_WPn.GPIO0_39 - DIG_IN_1 */
+			AM64X_IOPAD(0x00a0, PIN_INPUT, 7)
+			/* (N17) GPMC0_DIR.GPIO0_40 - DIG_IN_2 */
+			AM64X_IOPAD(0x00a4, PIN_INPUT, 7)
+			/* (R19) GPMC0_CSn0.GPIO0_41 - DIG_IN_3 */
+			AM64X_IOPAD(0x00a8, PIN_INPUT, 7)
+			/* (R20) GPMC0_CSn1.GPIO0_42 - DIG_IN_4 */
+			AM64X_IOPAD(0x00ac, PIN_INPUT, 7)
+		>;
+	};
+
+	main_gpio0_hog_pins: main-gpio0-hog-pins {
+		pinctrl-single,pins = <
+			/* (P19) GPMC0_CSn2.GPIO0_43 - MMC1_CTRL */
+			AM64X_IOPAD(0x00b0, PIN_OUTPUT, 7)
+		>;
+	};
+
+	main_gpio1_hog_pins: main-gpio1-hog-pins {
+		pinctrl-single,pins = <
+			/* (B15) SPI1_D0.GPIO1_50 - USB0_VBUS_OC# */
+			AM64X_IOPAD(0x0228, PIN_INPUT, 7)
+			/* (B16) UART0_CTSn.GPIO1_54 - PRG0_MDIO_SWITCH */
+			AM64X_IOPAD(0x0238, PIN_OUTPUT, 7)
+			/* (C19) EXTINTn.GPIO1_70 - PHY_INT# */
+			AM64X_IOPAD(0x0278, PIN_INPUT, 7)
+		>;
+	};
+
+	main_mcan0_pins: main-mcan0-pins {
+		pinctrl-single,pins = <
+			/* (B17) MCAN0_RX */
+			AM64X_IOPAD(0x0254, PIN_INPUT, 0)
+			/* (A17) MCAN0_TX */
+			AM64X_IOPAD(0x0250, PIN_OUTPUT, 0)
+		>;
+	};
+
+	main_mcan1_pins: main-mcan1-pins {
+		pinctrl-single,pins = <
+			/* (D17) MCAN1_RX */
+			AM64X_IOPAD(0x025c, PIN_INPUT, 0)
+			/* (C17) MCAN1_TX */
+			AM64X_IOPAD(0x0258, PIN_OUTPUT, 0)
+		>;
+	};
+
+	main_mmc1_pins: main-mmc1-pins {
+		pinctrl-single,pins = <
+			/* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x0294, PIN_INPUT, 0)
+			/* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x028c, PIN_INPUT, 0)
+			/* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0288, PIN_INPUT, 0)
+			/* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0284, PIN_INPUT, 0)
+			/* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x0280, PIN_INPUT, 0)
+			/* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x027c, PIN_INPUT, 0)
+			/* (D19) MMC1_SDCD.GPIO1_77 */
+			AM64X_IOPAD(0x0298, PIN_INPUT, 7)
+			/* (#N/A) MMC1_CLKLB */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0)
+		>;
+	};
+
+	main_mmc1_reg_pins: main-mmc1-reg-pins {
+		pinctrl-single,pins = <
+			/* (C13) SPI0_CS1.GPIO1_43 - MMC1_SD_EN */
+			AM64X_IOPAD(0x020c, PIN_OUTPUT, 7)
+		>;
+	};
+
+	main_mmc1_wifi_pwrseq_pins: main-mmc1-wifi-pwrseq-pins {
+		pinctrl-single,pins = <
+			/* (V19) GPMC0_AD8.GPIO0_23 - WIFI-BT_EN */
+			AM64X_IOPAD(0x005c, PIN_OUTPUT, 7)
+		>;
+	};
+
+	main_spi0_pins: main-spi0-pins {
+		pinctrl-single,pins = <
+			/* (D13) SPI0_CLK */
+			AM64X_IOPAD(0x0210, PIN_OUTPUT, 0)
+			/* (D12) SPI0_CS0 */
+			AM64X_IOPAD(0x0208, PIN_OUTPUT, 0)
+			/* (A13) SPI0_D0 */
+			AM64X_IOPAD(0x0214, PIN_OUTPUT, 0)
+			/* (A14) SPI0_D1 */
+			AM64X_IOPAD(0x0218, PIN_INPUT, 0)
+		>;
+	};
+
+	main_spi0_adc_pins: main-spi0-adc-pins {
+		pinctrl-single,pins = <
+			/* (A16) UART0_RTSn.GPIO1_55 - ADC_SYNC */
+			AM64X_IOPAD(0x023c, PIN_INPUT, 7)
+			/* (D16) UART1_CTSn.GPIO1_58 - ADC_RST# */
+			AM64X_IOPAD(0x0248, PIN_OUTPUT, 7)
+			/* (E16) UART1_RTSn.GPIO1_59 - ADC_DATA_RDY */
+			AM64X_IOPAD(0x024c, PIN_INPUT, 7)
+			/* (B19) I2C1_SDA.GPIO1_67 - ADC_INT# */
+			AM64X_IOPAD(0x026c, PIN_INPUT, 7)
+		>;
+	};
+
+	main_uart0_pins: main-uart0-pins {
+		pinctrl-single,pins = <
+			/* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0)
+			/* (C16) UART0_TXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)
+		>;
+	};
+
+	main_uart1_pins: main-uart1-pins {
+		pinctrl-single,pins = <
+			/* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0)
+			/* (E14) UART1_TXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0)
+		>;
+	};
+
+	main_uart2_pins: main-uart2-pins {
+		pinctrl-single,pins = <
+			/* (T18) GPMC0_AD2.UART2_RTSn */
+			AM64X_IOPAD(0x0044, PIN_OUTPUT, 2)
+			/* (T20) GPMC0_AD0.UART2_RXD */
+			AM64X_IOPAD(0x003c, PIN_INPUT, 2)
+			/* (U21) GPMC0_AD1.UART2_TXD */
+			AM64X_IOPAD(0x0040, PIN_OUTPUT, 2)
+		>;
+	};
+
+	main_uart3_pins: main-uart3-pins {
+		pinctrl-single,pins = <
+			/* (T17) GPMC0_AD9.UART3_CTSn */
+			AM64X_IOPAD(0x0060, PIN_INPUT, 2)
+			/* (U19) GPMC0_AD5.UART3_RTSn */
+			AM64X_IOPAD(0x0050, PIN_OUTPUT, 2)
+			/* (U20) GPMC0_AD3.UART3_RXD */
+			AM64X_IOPAD(0x0048, PIN_INPUT, 2)
+			/* (U18) GPMC0_AD4.UART3_TXD */
+			AM64X_IOPAD(0x004c, PIN_OUTPUT, 2)
+		>;
+	};
+
+	main_uart4_pins: main-uart4-pins {
+		pinctrl-single,pins = <
+			/* (R16) GPMC0_AD10.UART4_CTSn */
+			AM64X_IOPAD(0x0064, PIN_INPUT, 2)
+			/* (R17) GPMC0_CLK.UART4_RTSn */
+			AM64X_IOPAD(0x007c, PIN_OUTPUT, 2)
+			/* (V20) GPMC0_AD6.UART4_RXD */
+			AM64X_IOPAD(0x0054, PIN_INPUT, 2)
+			/* (V21) GPMC0_AD7.UART4_TXD */
+			AM64X_IOPAD(0x0058, PIN_OUTPUT, 2)
+
+			/* Control GPIOs for IOT Module connected to UART4 */
+			/* (D18) ECAP0_IN_APWM_OUT.GPIO1_68 - BG95_PWRKEY */
+			AM64X_IOPAD(0x0270, PIN_OUTPUT, 7)
+			/* (A19) EXT_REFCLK1.GPIO1_69 - BG95_RESET */
+			AM64X_IOPAD(0x0274, PIN_OUTPUT, 7)
+		>;
+	};
+
+	main_uart5_pins: main-uart5-pins {
+		pinctrl-single,pins = <
+			/* (P16) GPMC0_ADVn_ALE.UART5_RXD */
+			AM64X_IOPAD(0x0084, PIN_INPUT, 2)
+			/* (R18) GPMC0_OEn_REn.UART5_TXD */
+			AM64X_IOPAD(0x0088, PIN_OUTPUT, 2)
+		>;
+	};
+
+	main_usb0_pins: main-usb0-pins {
+		pinctrl-single,pins = <
+			/* (E19) USB0_DRVVBUS */
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0)
+		>;
+	};
+
+	pru_icssg1_mdio_pins: pru-icssg1-mdio-pins {
+		pinctrl-single,pins = <
+			/* (A15) SPI1_D1.GPIO1_51 - RESET_PRG1_RGMII1# */
+			AM64X_IOPAD(0x022c, PIN_OUTPUT, 7)
+			/* (B14) SPI1_CS0.GPIO1_47 - RESET_PRG1_RGMII2# */
+			AM64X_IOPAD(0x021c, PIN_OUTPUT, 7)
+
+			/* (Y6) PRG1_MDIO0_MDC */
+			AM64X_IOPAD(0x015c, PIN_OUTPUT, 0)
+			/* (AA6) PRG1_MDIO0_MDIO */
+			AM64X_IOPAD(0x0158, PIN_INPUT, 0)
+		>;
+	};
+
+	pru_icssg1_rgmii1_pins: pru-icssg1-rgmii1-pins {
+		pinctrl-single,pins = <
+			/* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+			AM64X_IOPAD(0x00b8, PIN_INPUT, 2)
+			/* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+			AM64X_IOPAD(0x00bc, PIN_INPUT, 2)
+			/* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+			AM64X_IOPAD(0x00c0, PIN_INPUT, 2)
+			/* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+			AM64X_IOPAD(0x00c4, PIN_INPUT, 2)
+			/* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+			AM64X_IOPAD(0x00d0, PIN_INPUT, 2)
+			/* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+			AM64X_IOPAD(0x00c8, PIN_INPUT, 2)
+			/* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */
+			AM64X_IOPAD(0x00e4, PIN_OUTPUT, 2)
+			/* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */
+			AM64X_IOPAD(0x00e8, PIN_OUTPUT, 2)
+			/* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */
+			AM64X_IOPAD(0x00ec, PIN_OUTPUT, 2)
+			/* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */
+			AM64X_IOPAD(0x00f0, PIN_OUTPUT, 2)
+			/* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+			AM64X_IOPAD(0x00f8, PIN_OUTPUT, 2)
+			/* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
+			AM64X_IOPAD(0x00f4, PIN_OUTPUT, 2)
+		>;
+	};
+
+	pru_icssg1_rgmii2_pins: pru-icssg1-rgmii2-pins {
+		pinctrl-single,pins = <
+			/* (W11) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */
+			AM64X_IOPAD(0x0108, PIN_INPUT, 2)
+			/* (V11) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 2)
+			/* (AA12) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 2)
+			/* (Y12) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 2)
+			/* (U11) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 2)
+			/* (W12) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 2)
+			/* (AA10) PRG1_PRU1_GPO11.PRG1_RGMII2_TD0 */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 2)
+			/* (V10) PRG1_PRU1_GPO12.PRG1_RGMII2_TD1 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 2)
+			/* (U10) PRG1_PRU1_GPO13.PRG1_RGMII2_TD2 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 2)
+			/* (AA11) PRG1_PRU1_GPO14.PRG1_RGMII2_TD3 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 2)
+			/* (Y10) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */
+			AM64X_IOPAD(0x0148, PIN_OUTPUT, 2)
+			/* (Y11) PRG1_PRU1_GPO15.PRG1_RGMII2_TX_CTL */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 2)
+		>;
+	};
+
+	pwm_fan_pins: pwm-fan-pins {
+		pinctrl-single,pins = <
+			/* (T19) GPMC0_BE1n.EHRPWM5_A */
+			AM64X_IOPAD(0x0094, PIN_OUTPUT, 3)
+			/* (C14) SPI1_CLK.GPIO1_49 - FAN_RPM */
+			AM64X_IOPAD(0x0224, PIN_INPUT, 7)
+		>;
+	};
+
+	pwm_fan_reg_pins: pwm-fan-reg-pins {
+		pinctrl-single,pins = <
+			/* (D14) SPI1_CS1.GPIO1_48 - FAN_PWR */
+			AM64X_IOPAD(0x0220, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	mcu_gpio_keys_pins: mcu-gpio-keys-pins {
+		pinctrl-single,pins = <
+			/* (A7) MCU_SPI1_CS0.MCU_GPIO0_5 */
+			AM64X_MCU_IOPAD(0x0014, PIN_INPUT, 7)
+		>;
+	};
+
+	mcu_gpio_leds_pins: mcu-gpio-leds-pins {
+		pinctrl-single,pins = <
+			/* (C7) MCU_SPI1_D0.MCU_GPIO0_8 */
+			AM64X_MCU_IOPAD(0x0020, PIN_OUTPUT, 7)
+			/* (C8) MCU_SPI1_D1.MCU_GPIO0_9 */
+			AM64X_MCU_IOPAD(0x0024, PIN_OUTPUT, 7)
+		>;
+	};
+
+	mcu_gpio0_pins: mcu-gpio0-pins {
+		pinctrl-single,pins = <
+			/* (E8) MCU_UART0_RTSn.MCU_GPIO0_0 */
+			AM64X_MCU_IOPAD(0x0034, PIN_INPUT, 7)
+			/* (D8) MCU_UART0_CTSn.MCU_GPIO0_1 */
+			AM64X_MCU_IOPAD(0x0030, PIN_INPUT, 7)
+			/* (B7) MCU_SPI1_CS1.MCU_GPIO0_6 */
+			AM64X_MCU_IOPAD(0x0018, PIN_INPUT, 7)
+			/* (D7) MCU_SPI1_CLK.MCU_GPIO0_7 */
+			AM64X_MCU_IOPAD(0x001c, PIN_INPUT, 7)
+			/* (A11) MCU_I2C1_SCL.MCU_GPIO0_20 */
+			AM64X_MCU_IOPAD(0x0050, PIN_INPUT, 7)
+			/* (B10) MCU_I2C1_SDA.MCU_GPIO0_21 */
+			AM64X_MCU_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	mcu_i2c0_pins: mcu-i2c0-pins {
+		pinctrl-single,pins = <
+			/* (E9) MCU_I2C0_SCL */
+			AM64X_MCU_IOPAD(0x0048, PIN_INPUT, 0)
+			/* (A10) MCU_I2C0_SDA */
+			AM64X_MCU_IOPAD(0x004c, PIN_INPUT, 0)
+		>;
+	};
+
+	mcu_spi0_pins: mcu-spi0-pins {
+		pinctrl-single,pins = <
+			/* (E6) MCU_SPI0_CLK */
+			AM64X_MCU_IOPAD(0x0008, PIN_OUTPUT, 0)
+			/* (D6) MCU_SPI0_CS0 */
+			AM64X_MCU_IOPAD(0x0000, PIN_OUTPUT, 0)
+			/* (C6) MCU_SPI0_CS1 */
+			AM64X_MCU_IOPAD(0x0004, PIN_OUTPUT, 0)
+			/* (E7) MCU_SPI0_D0 */
+			AM64X_MCU_IOPAD(0x000c, PIN_OUTPUT, 0)
+			/* (B6) MCU_SPI0_D1 */
+			AM64X_MCU_IOPAD(0x0010, PIN_INPUT, 0)
+		>;
+	};
+
+	mcu_uart0_pins: mcu-uart0-pins {
+		pinctrl-single,pins = <
+			/* (A9) MCU_UART0_RXD */
+			AM64X_MCU_IOPAD(0x0028, PIN_INPUT, 0)
+			/* (A8) MCU_UART0_TXD */
+			AM64X_MCU_IOPAD(0x002c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	mcu_uart1_pins: mcu-uart1-pins {
+		pinctrl-single,pins = <
+			/* (B8) MCU_UART1_CTSn */
+			AM64X_MCU_IOPAD(0x0040, PIN_INPUT, 0)
+			/* (B9) MCU_UART1_RTSn */
+			AM64X_MCU_IOPAD(0x0044, PIN_OUTPUT, 0)
+			/* (C9) MCU_UART1_RXD */
+			AM64X_MCU_IOPAD(0x0038, PIN_INPUT, 0)
+			/* (D9) MCU_UART1_TXD */
+			AM64X_MCU_IOPAD(0x003c, PIN_OUTPUT, 0)
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
new file mode 100644
index 0000000000..6229849b5d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ */
+
+#include "k3-am642.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &main_i2c0;
+		mmc0 = &sdhci0;
+		spi0 = &ospi0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 1G RAM - default variant */
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a5000000 {
+			reg = <0x00 0xa5000000 0x00 0x00800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tmp1075: temperature-sensor@4a {
+		compatible = "ti,tmp1075";
+		reg = <0x4a>;
+	};
+
+	eeprom0: eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	eeprom1: eeprom@54 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster6 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <84000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* Filled by bootloader */
+		};
+	};
+};
+
+&sdhci0 {
+	non-removable;
+	disable-wp;
+	no-sdio;
+	no-sd;
+	ti,driver-strength-ohm = <50>;
+};
+
+&main_pmx0 {
+	main_i2c0_pins: main-i2c0-pins {
+		pinctrl-single,pins = <
+			/* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0)
+			/* (B18) I2C0_SDA */
+			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0)
+		>;
+	};
+
+	ospi0_pins: ospi0-pins {
+		pinctrl-single,pins = <
+			/* (N20) OSPI0_CLK */
+			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0)
+			/* (L19) OSPI0_CSn0 */
+			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0)
+			/* (M19) OSPI0_D0 */
+			AM64X_IOPAD(0x000c, PIN_INPUT, 0)
+			/* (M18) OSPI0_D1 */
+			AM64X_IOPAD(0x0010, PIN_INPUT, 0)
+			/* (M20) OSPI0_D2 */
+			AM64X_IOPAD(0x0014, PIN_INPUT, 0)
+			/* (M21) OSPI0_D3 */
+			AM64X_IOPAD(0x0018, PIN_INPUT, 0)
+			/* (P21) OSPI0_D4 */
+			AM64X_IOPAD(0x001c, PIN_INPUT, 0)
+			/* (P20) OSPI0_D5 */
+			AM64X_IOPAD(0x0020, PIN_INPUT, 0)
+			/* (N18) OSPI0_D6 */
+			AM64X_IOPAD(0x0024, PIN_INPUT, 0)
+			/* (M17) OSPI0_D7 */
+			AM64X_IOPAD(0x0028, PIN_INPUT, 0)
+			/* (N19) OSPI0_DQS */
+			AM64X_IOPAD(0x0008, PIN_INPUT, 0)
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642.dtsi b/arch/arm64/boot/dts/ti/k3-am642.dtsi
new file mode 100644
index 0000000000..7a6eedea3a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM642 SoC family in Dual core configuration
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am64.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x40000>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
new file mode 100644
index 0000000000..51f902fa35
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2021
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG1
+ */
+
+&dss {
+	assigned-clocks = <&k3_clks 67 2>;
+	assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&serdes0 {
+	status = "disabled";
+};
+
+&sdhci1 {
+	no-1-8-v;
+};
+
+&tx_pru0_0 {
+	status = "disabled";
+};
+
+&tx_pru0_1 {
+	status = "disabled";
+};
+
+&tx_pru1_0 {
+	status = "disabled";
+};
+
+&tx_pru1_1 {
+	status = "disabled";
+};
+
+&tx_pru2_0 {
+	status = "disabled";
+};
+
+&tx_pru2_1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
new file mode 100644
index 0000000000..e9419c4fe6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2021
+ *
+ * Authors:
+ *   Chao Zeng <chao.zeng@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG2
+ */
+
+&main_pmx0 {
+	cp2102n_reset_pin_default: cp2102n-reset-default-pins {
+		pinctrl-single,pins = <
+			/* (AF12) GPIO1_24, used as cp2102 reset */
+			AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2102n_reset_pin_default>;
+	gpio-line-names =
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "CP2102N-RESET";
+};
+
+&dss {
+	/* Workaround needed to get DP clock of 154Mhz */
+	assigned-clocks = <&k3_clks 67 0>;
+};
+
+&serdes0 {
+	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>;
+};
+
+&dwc3_0 {
+	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+				 <&k3_clks 151 8>;  /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
+	phys = <&serdes0 PHY_TYPE_USB3 0>;
+	phy-names = "usb3-phy";
+};
+
+&usb0 {
+	maximum-speed = "super-speed";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
new file mode 100644
index 0000000000..b849648d51
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -0,0 +1,728 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
+ */
+
+#include "k3-am654.dtsi"
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &main_i2c0;
+		i2c3 = &main_i2c1;
+		i2c4 = &main_i2c2;
+		i2c5 = &main_i2c3;
+		spi0 = &mcu_spi0;
+		mmc0 = &sdhci1;
+		mmc1 = &sdhci0;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: secure-ddr@9e800000 {
+			reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0100000 0 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1100000 0 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a2000000 {
+			reg = <0x00 0xa2000000 0x00 0x00200000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		status-led-red {
+			gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		status-led-green {
+			gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led1-red {
+			gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led1-green {
+			gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led2-red {
+			gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led2-green {
+			gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	dp_refclk: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			/* (AC7) WKUP_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT,  0)
+			/* (AD6) WKUP_I2C0_SDA */
+			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT,  0)
+		>;
+	};
+
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			/* (AD8) MCU_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT,  0)
+			/* (AD7) MCU_I2C0_SDA */
+			AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT,  0)
+		>;
+	};
+
+	arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins {
+		pinctrl-single,pins = <
+			/* (R2) WKUP_GPIO0_21 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
+		>;
+	};
+
+	push_button_pins_default: push-button-default-pins {
+		pinctrl-single,pins = <
+			/* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT,  7)
+		>;
+	};
+
+	arduino_uart_pins_default: arduino-uart-default-pins {
+		pinctrl-single,pins = <
+			/* (P4) MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT,  4)
+			/* (P5) MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+		>;
+	};
+
+	arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins {
+		pinctrl-single,pins = <
+			/* (P1) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
+		>;
+	};
+
+	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
+		pinctrl-single,pins = <
+			/* (N4) WKUP_GPIO0_34 */
+			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
+			/* (M2) WKUP_GPIO0_36 */
+			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7)
+			/* (M3) WKUP_GPIO0_37 */
+			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7)
+			/* (M4) WKUP_GPIO0_38 */
+			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7)
+			/* (M1) WKUP_GPIO0_41 */
+			AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7)
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			/* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0)
+			/* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT,  0)
+			/* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT,  0)
+			/* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT,  0)
+			/* (R4) MCU_OSPI0_CSn0 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	db9_com_mode_pins_default: db9-com-mode-default-pins {
+		pinctrl-single,pins = <
+			/* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */
+			AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7)
+			/* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */
+			AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT, 7)
+			/* (AC1) WKUP_GPIO0_7, used as uart0 term */
+			AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 7)
+			/* (AC2) WKUP_GPIO0_6, used as uart0 en */
+			AM65X_WKUP_IOPAD(0x00c8, PIN_OUTPUT, 7)
+		>;
+	};
+
+	leds_pins_default: leds-default-pins {
+		pinctrl-single,pins = <
+			/* (T2) WKUP_GPIO0_17, used as user led1 red */
+			AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7)
+			/* (R3) WKUP_GPIO0_22, used as user led1 green */
+			AM65X_WKUP_IOPAD(0x0028, PIN_OUTPUT, 7)
+			/* (R5) WKUP_GPIO0_24, used as status led red */
+			AM65X_WKUP_IOPAD(0x0030, PIN_OUTPUT, 7)
+			/* (N2) WKUP_GPIO0_32, used as status led green */
+			AM65X_WKUP_IOPAD(0x0050, PIN_OUTPUT, 7)
+		>;
+	};
+
+	mcu_spi0_pins_default: mcu-spi0-default-pins {
+		pinctrl-single,pins = <
+			/* (Y1) MCU_SPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT,  0)
+			/* (Y3) MCU_SPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT,  0)
+			/* (Y2) MCU_SPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT,  0)
+			/* (Y4) MCU_SPI0_CS0 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	minipcie_pins_default: minipcie-default-pins {
+		pinctrl-single,pins = <
+			/* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */
+			AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0174, PIN_INPUT,  6)  /* (AE23) UART1_RXD */
+			AM65X_IOPAD(0x014c, PIN_OUTPUT, 6)  /* (AD23) UART1_TXD */
+			AM65X_IOPAD(0x0178, PIN_INPUT,  6)  /* (AD22) UART1_CTSn */
+			AM65X_IOPAD(0x017c, PIN_OUTPUT, 6)  /* (AC21) UART1_RTSn */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c0, PIN_INPUT,  2)  /* (AF13) I2C3_SCL */
+			AM65X_IOPAD(0x01d4, PIN_INPUT,  2)  /* (AG12) I2C3_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0)  /* (C27) MMC1_CLK */
+			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP,   0)  /* (C28) MMC1_CMD */
+			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP,   0)  /* (D28) MMC1_DAT0 */
+			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP,   0)  /* (E27) MMC1_DAT1 */
+			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP,   0)  /* (D26) MMC1_DAT2 */
+			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP,   0)  /* (D27) MMC1_DAT3 */
+			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP,   0)  /* (B24) MMC1_SDCD */
+			AM65X_IOPAD(0x02e0, PIN_INPUT_PULLUP,   0)  /* (C24) MMC1_SDWP */
+		>;
+	};
+
+	usb0_pins_default: usb0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0)  /* (AD9) USB0_DRVVBUS */
+		>;
+	};
+
+	usb1_pins_default: usb1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0)  /* (AC8) USB1_DRVVBUS */
+		>;
+	};
+
+	arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0084, PIN_OUTPUT, 7)  /* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x008C, PIN_OUTPUT, 7)  /* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 7)  /* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7)  /* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7)  /* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7)  /* (AD15) GPIO0_51 */
+		>;
+	};
+
+	dss_vout1_pins_default: dss-vout1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)  /* VOUT1_DATA0 */
+			AM65X_IOPAD(0x0004, PIN_OUTPUT, 1)  /* VOUT1_DATA1 */
+			AM65X_IOPAD(0x0008, PIN_OUTPUT, 1)  /* VOUT1_DATA2 */
+			AM65X_IOPAD(0x000c, PIN_OUTPUT, 1)  /* VOUT1_DATA3 */
+			AM65X_IOPAD(0x0010, PIN_OUTPUT, 1)  /* VOUT1_DATA4 */
+			AM65X_IOPAD(0x0014, PIN_OUTPUT, 1)  /* VOUT1_DATA5 */
+			AM65X_IOPAD(0x0018, PIN_OUTPUT, 1)  /* VOUT1_DATA6 */
+			AM65X_IOPAD(0x001c, PIN_OUTPUT, 1)  /* VOUT1_DATA7 */
+			AM65X_IOPAD(0x0020, PIN_OUTPUT, 1)  /* VOUT1_DATA8 */
+			AM65X_IOPAD(0x0024, PIN_OUTPUT, 1)  /* VOUT1_DATA9 */
+			AM65X_IOPAD(0x0028, PIN_OUTPUT, 1)  /* VOUT1_DATA10 */
+			AM65X_IOPAD(0x002c, PIN_OUTPUT, 1)  /* VOUT1_DATA11 */
+			AM65X_IOPAD(0x0030, PIN_OUTPUT, 1)  /* VOUT1_DATA12 */
+			AM65X_IOPAD(0x0034, PIN_OUTPUT, 1)  /* VOUT1_DATA13 */
+			AM65X_IOPAD(0x0038, PIN_OUTPUT, 1)  /* VOUT1_DATA14 */
+			AM65X_IOPAD(0x003c, PIN_OUTPUT, 1)  /* VOUT1_DATA15 */
+			AM65X_IOPAD(0x0040, PIN_OUTPUT, 1)  /* VOUT1_DATA16 */
+			AM65X_IOPAD(0x0044, PIN_OUTPUT, 1)  /* VOUT1_DATA17 */
+			AM65X_IOPAD(0x0048, PIN_OUTPUT, 1)  /* VOUT1_DATA18 */
+			AM65X_IOPAD(0x004c, PIN_OUTPUT, 1)  /* VOUT1_DATA19 */
+			AM65X_IOPAD(0x0050, PIN_OUTPUT, 1)  /* VOUT1_DATA20 */
+			AM65X_IOPAD(0x0054, PIN_OUTPUT, 1)  /* VOUT1_DATA21 */
+			AM65X_IOPAD(0x0058, PIN_OUTPUT, 1)  /* VOUT1_DATA22 */
+			AM65X_IOPAD(0x005c, PIN_OUTPUT, 1)  /* VOUT1_DATA23 */
+			AM65X_IOPAD(0x0060, PIN_OUTPUT, 1)  /* VOUT1_VSYNC */
+			AM65X_IOPAD(0x0064, PIN_OUTPUT, 1)  /* VOUT1_HSYNC */
+			AM65X_IOPAD(0x0068, PIN_OUTPUT, 1)  /* VOUT1_PCLK */
+			AM65X_IOPAD(0x006c, PIN_OUTPUT, 1)  /* VOUT1_DE */
+		>;
+	};
+
+	dp_pins_default: dp-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0078, PIN_OUTPUT, 7)  /* (AF18) DP rst_n */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0074, PIN_INPUT,  5)  /* (T27) I2C2_SCL */
+			AM65X_IOPAD(0x0070, PIN_INPUT,  5)  /* (R25) I2C2_SDA */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_INPUT,  0)  /* (D20) I2C0_SCL */
+			AM65X_IOPAD(0x0004, PIN_INPUT,  0)  /* (C21) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0008, PIN_INPUT,  0)  /* (B21) I2C1_SCL */
+			AM65X_IOPAD(0x000c, PIN_INPUT,  0)  /* (E21) I2C1_SDA */
+		>;
+	};
+
+	ecap0_pins_default: ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0010, PIN_INPUT,  0)  /* (D21) ECAP0_IN_APWM_OUT */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+};
+
+&main_uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&arduino_uart_pins_default>;
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
+	gpio-line-names =
+		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "IO4", "", "IO5", "", "", "IO6", "",
+		"", "", "", "IO7", "", "", "", "", "IO8", "",
+		"", "IO9";
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&arduino_io_d2_to_d3_pins_default>,
+		<&arduino_i2c_aio_switch_pins_default>,
+		<&arduino_io_oe_pins_default>,
+		<&push_button_pins_default>,
+		<&db9_com_mode_pins_default>;
+	gpio-line-names =
+		/* 0..9 */
+		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
+		"UART0-enable", "UART0-terminate", "", "WIFI-disable",
+		/* 10..19 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 20..29 */
+		"", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0",
+		/* 30..39 */
+		"IO1", "IO2", "", "IO3", "IO17-direction", "A5",
+		"IO16-direction", "IO15-direction", "IO14-direction", "A3",
+		/* 40..49 */
+		"", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13",
+		"IO11",
+		/* 50..51 */
+		"IO12", "IO10";
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&mcu_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	psu: regulator@60 {
+		compatible = "ti,tps62363";
+		reg = <0x60>;
+		regulator-name = "tps62363-vout";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		ti,enable-vout-discharge;
+	};
+
+	/* D4200 */
+	pcal9535_1: gpio@20 {
+		compatible = "nxp,pcal9535";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull",
+			"A5-pull", "", "",
+			"IO14-enable", "IO15-enable", "IO16-enable",
+			"IO17-enable", "IO18-enable", "IO19-enable";
+	};
+
+	/* D4201 */
+	pcal9535_2: gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-direction", "IO1-direction", "IO2-direction",
+			"IO3-direction", "IO4-direction", "IO5-direction",
+			"IO6-direction", "IO7-direction",
+			"IO8-direction", "IO9-direction", "IO10-direction",
+			"IO11-direction", "IO12-direction", "IO13-direction",
+			"IO19-direction";
+	};
+
+	/* D4202 */
+	pcal9535_3: gpio@25 {
+		compatible = "nxp,pcal9535";
+		reg = <0x25>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull",
+			"IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull",
+			"IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull",
+			"IO12-pull", "IO13-pull";
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	eeprom: eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	edp-bridge@f {
+		compatible = "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_pins_default>;
+		reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+
+		clock-names = "ref";
+		clocks = <&dp_refclk>;
+
+		toshiba,hpd-pin = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+		};
+	};
+};
+
+&mcu_cpsw {
+	status = "disabled";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_default>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+	dr_mode = "host";
+};
+
+&mcu_spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_spi0_pins_default>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ti,pindir-d0-out-d1-in;
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <50000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			seboot@0 {
+				label = "seboot";
+				reg = <0x0 0x180000>; /* 1.5M */
+			};
+
+			tispl@180000 {
+				label = "tispl";
+				reg = <0x180000 0x200000>; /* 2M */
+			};
+
+			u-boot@380000 {
+				label = "u-boot";
+				reg = <0x380000 0x300000>; /* 3M */
+			};
+
+			env@680000 {
+				label = "env";
+				reg = <0x680000 0x20000>; /* 128K */
+			};
+
+			env-backup@6a0000 {
+				label = "env.backup";
+				reg = <0x6a0000 0x20000>; /* 128K */
+			};
+
+			otpcmd@6c0000 {
+				label = "otpcmd";
+				reg = <0x6c0000 0x10000>; /* 64K */
+			};
+
+			unused@6d0000 {
+				label = "unused";
+				reg = <0x6d0000 0x7b0000>; /* 7872K */
+			};
+
+			seboot-backup@e80000 {
+				label = "seboot.backup";
+				reg = <0xe80000 0x180000>; /* 1.5M */
+			};
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout1_pins_default>;
+
+	assigned-clocks = <&k3_clks 67 2>;
+	assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@1 {
+		reg = <1>;
+
+		dpi_out: endpoint {
+			remote-endpoint = <&bridge_in>;
+		};
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&minipcie_pins_default>;
+
+	num-lanes = <1>;
+	phys = <&serdes1 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy0";
+	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+};
+
+&mcu_r5fss0_core1 {
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
new file mode 100644
index 0000000000..c98068b6c1
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -0,0 +1,1532 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include <dt-bindings/phy/phy-am654-serdes.h>
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x200000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+
+		sysfw-sram@f0000 {
+			reg = <0xf0000 0x10000>;
+		};
+
+		l3cache-sram@100000 {
+			reg = <0x100000 0x100000>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0x90000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	serdes0: serdes@900000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x900000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
+		clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+		assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+		ti,serdes-clk = <&serdes0_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 0>;
+	};
+
+	serdes1: serdes@910000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x910000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
+		clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
+		assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
+		ti,serdes-clk = <&serdes1_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 1>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	crypto: crypto@4e00000 {
+		compatible = "ti,am654-sa2ul";
+		reg = <0x0 0x4e00000 0x0 0x1200>;
+		power-domains = <&k3_pds 136 TI_SCI_PD_SHARED>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+
+		dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>,
+				<&main_udmap 0x4003>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x0 0x4e10000 0x0 0x7d>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled"; /* Used by OP-TEE */
+		};
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104200 0x0 0x30>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001ff>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104280 0x0 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x11c000 0x0 0x2e4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx1: pinctrl@11c2e8 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x11c2e8 0x0 0x24>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 110 1>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 111 1>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 112 1>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 113 1>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	ecap0: pwm@3100000 {
+		compatible = "ti,am654-ecap", "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x0 0x03100000 0x0 0x60>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 39 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2100000 0x0 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 137 1>;
+		power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx0", "rx0";
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2110000 0x0 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 138 1>;
+		power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		assigned-clocks = <&k3_clks 137 1>;
+		assigned-clock-rates = <48000000>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2120000 0x0 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 139 1>;
+		power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2130000 0x0 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 140 1>;
+		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2140000 0x0 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 141 1>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 23 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 23 0>;
+		assigned-clock-parents = <&k3_clks 23 1>;
+		power-domains = <&k3_pds 23 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 24 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 24 0>;
+		assigned-clock-parents = <&k3_clks 24 1>;
+		power-domains = <&k3_pds 24 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 27 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 27 0>;
+		assigned-clock-parents = <&k3_clks 27 1>;
+		power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 28 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 28 0>;
+		assigned-clock-parents = <&k3_clks 28 1>;
+		power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 29 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 29 0>;
+		assigned-clock-parents = <&k3_clks 29 1>;
+		power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 30 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 30 0>;
+		assigned-clock-parents = <&k3_clks 30 1>;
+		power-domains = <&k3_pds 30 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 31 0>;
+		assigned-clocks = <&k3_clks 31 0>;
+		assigned-clock-parents = <&k3_clks 31 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 31 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 32 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 32 0>;
+		assigned-clock-parents = <&k3_clks 32 1>;
+		power-domains = <&k3_pds 32 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 33 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 33 0>;
+		assigned-clock-parents = <&k3_clks 33 1>;
+		power-domains = <&k3_pds 33 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 34 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 34 0>;
+		assigned-clock-parents = <&k3_clks 34 1>;
+		power-domains = <&k3_pds 34 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 25 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 25 0>;
+		assigned-clock-parents = <&k3_clks 25 1>;
+		power-domains = <&k3_pds 25 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 26 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 26 0>;
+		assigned-clock-parents = <&k3_clks 26 1>;
+		power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	sdhci0: mmc@4f80000 {
+		compatible = "ti,am654-sdhci-5.1";
+		reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+		power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x5>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+	};
+
+	sdhci1: mmc@4fa0000 {
+		compatible = "ti,am654-sdhci-5.1";
+		reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>;
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,otap-del-sel-ddr52 = <0x4>;
+		ti,otap-del-sel-hs200 = <0x7>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0 0x00100000 0 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		serdes0_clk: clock@4080 {
+			compatible = "syscon";
+			reg = <0x00004080 0x4>;
+		};
+
+		serdes1_clk: clock@4090 {
+			compatible = "syscon";
+			reg = <0x00004090 0x4>;
+		};
+
+		serdes_mux: mux-controller {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
+					<0x4090 0x3>; /* SERDES1 lane select */
+		};
+
+		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
+			compatible = "syscon";
+			reg = <0x000041e0 0x14>;
+		};
+
+		ehrpwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am654-ehrpwm-tbclk";
+			reg = <0x4140 0x18>;
+			#clock-cells = <1>;
+		};
+	};
+
+	dwc3_0: dwc3@4000000 {
+		compatible = "ti,am654-dwc3";
+		reg = <0x0 0x4000000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x4000000 0x20000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		dma-coherent;
+		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
+		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
+		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
+
+		usb0: usb@10000 {
+			compatible = "snps,dwc3";
+			reg = <0x10000 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "peripheral",
+					  "host",
+					  "otg";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			snps,dis_u3_susphy_quirk;
+		};
+	};
+
+	usb0_phy: phy@4100000 {
+		compatible = "ti,am654-usb2", "ti,omap-usb2";
+		reg = <0x0 0x4100000 0x0 0x54>;
+		syscon-phy-power = <&scm_conf 0x4000>;
+		clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+		clock-names = "wkupclk", "refclk";
+		#phy-cells = <0>;
+	};
+
+	dwc3_1: dwc3@4020000 {
+		compatible = "ti,am654-dwc3";
+		reg = <0x0 0x4020000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x4020000 0x20000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		dma-coherent;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 2>;
+		assigned-clocks = <&k3_clks 152 2>;
+		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+
+		usb1: usb@10000 {
+			compatible = "snps,dwc3";
+			reg = <0x10000 0x10000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "peripheral",
+					  "host",
+					  "otg";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+		};
+	};
+
+	usb1_phy: phy@4110000 {
+		compatible = "ti,am654-usb2", "ti,omap-usb2";
+		reg = <0x0 0x4110000 0x0 0x54>;
+		syscon-phy-power = <&scm_conf 0x4020>;
+		clocks = <&k3_clks 152 0>, <&k3_clks 152 1>;
+		clock-names = "wkupclk", "refclk";
+		#phy-cells = <0>;
+	};
+
+	intr_main_gpio: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x0 0x00a00000 0x0 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <100>;
+		ti,interrupt-ranges = <0 392 32>;
+	};
+
+	main_navss: bus@30800000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <118>;
+
+		intr_main_navss: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x0 0x310e0000 0x0 0x2000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <182>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>;
+		};
+
+		inta_main_udmass: interrupt-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x0 0x33d00000 0x0 0x100000>;
+			interrupt-controller;
+			interrupt-parent = <&intr_main_navss>;
+			msi-controller;
+			#interrupt-cells = <0>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <179>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x3c000000 0x0 0x400000>,
+			      <0x0 0x38000000 0x0 0x400000>,
+			      <0x0 0x31120000 0x0 0x100>,
+			      <0x0 0x33000000 0x0 0x40000>,
+			      <0x0 0x31080000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <818>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <187>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,am654-navss-main-udmap";
+			reg = <0x0 0x31150000 0x0 0x100>,
+			      <0x0 0x34000000 0x0 0x100000>,
+			      <0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <188>;
+			ti,ringacc = <&ringacc>;
+
+			ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+						<0xd>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+						<0xa>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&main_cpts_mux>;
+			clock-names = "cpts";
+			interrupts-extended = <&intr_main_navss 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+
+			main_cpts_mux: refclk-mux {
+				#clock-cells = <0>;
+				clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+					<&k3_clks 118 6>, <&k3_clks 118 3>,
+					<&k3_clks 118 8>, <&k3_clks 118 14>,
+					<&k3_clks 120 3>, <&k3_clks 121 3>;
+				assigned-clocks = <&main_cpts_mux>;
+				assigned-clock-parents = <&k3_clks 118 5>;
+			};
+		};
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_main_gpio>;
+		interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <96>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 57 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_main_gpio>;
+		interrupts = <200>, <201>, <202>, <203>, <204>, <205>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <90>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 58 0>;
+		clock-names = "gpio";
+	};
+
+	pcie0_rc: pcie@5500000 {
+		compatible = "ti,am654-pcie-rc";
+		reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu";
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0          0x0 0x10020000 0 0x00010000>,
+			 <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
+		ti,syscon-pcie-id = <&scm_conf 0x210>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+		bus-range = <0x0 0xff>;
+		num-viewport = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		device_type = "pci";
+		status = "disabled";
+	};
+
+	pcie0_ep: pcie-ep@5500000 {
+		compatible = "ti,am654-pcie-ep";
+		reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
+		reg-names = "app", "dbics", "addr_space", "atu";
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
+	};
+
+	pcie1_rc: pcie@5600000 {
+		compatible = "ti,am654-pcie-rc";
+		reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu";
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0          0x0   0x18020000 0 0x00010000>,
+			 <0x82000000 0 0x18030000 0x0   0x18030000 0 0x07FD0000>;
+		ti,syscon-pcie-id = <&scm_conf 0x210>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4070>;
+		bus-range = <0x0 0xff>;
+		num-viewport = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+		device_type = "pci";
+		status = "disabled";
+	};
+
+	pcie1_ep: pcie-ep@5600000 {
+		compatible = "ti,am654-pcie-ep";
+		reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
+		reg-names = "app", "dbics", "addr_space", "atu";
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4070>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 104 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 105 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 106 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	cal: cal@6f03000 {
+		compatible = "ti,am654-cal";
+		reg = <0x0 0x06f03000 0x0 0x400>,
+		      <0x0 0x06f03800 0x0 0x40>;
+		reg-names = "cal_top",
+			    "cal_rx_core0";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		ti,camerrx-control = <&scm_conf 0x40c0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 2 0>;
+		power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csi2_0: port@0 {
+				reg = <0>;
+			};
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,am65x-dss";
+		reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
+		      <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
+		      <0x0 0x04a06000 0x0 0x1000>, /* vid */
+		      <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
+		      <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
+		      <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
+		      <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+		reg-names = "common", "vidl1", "vid",
+			"ovr1", "ovr2", "vp1", "vp2";
+
+		ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+
+		power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+
+		clocks = <&k3_clks 67 1>,
+			 <&k3_clks 216 1>,
+			 <&k3_clks 67 2>;
+		clock-names = "fck", "vp1", "vp2";
+
+		/*
+		 * Set vp2 clk (DPI_1_IN_CLK) mux to PLL4 via
+		 * DIV1. See "Figure 12-3365. DSS Integration"
+		 * in AM65x TRM for details.
+		 */
+		assigned-clocks = <&k3_clks 67 2>;
+		assigned-clock-parents = <&k3_clks 67 5>;
+
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+
+		dma-coherent;
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3000000 0x0 0x100>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3010000 0x0 0x100>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3020000 0x0 0x100>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3030000 0x0 0x100>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3040000 0x0 0x100>;
+		power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3050000 0x0 0x100>;
+		power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	icssg0: icssg@b000000 {
+		compatible = "ti,am654-icssg";
+		reg = <0x00 0xb000000 0x00 0x80000>;
+		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0xb000000 0x80000>;
+
+		icssg0_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg0_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg0_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 62 19>, /* icssg0_core_clk */
+						 <&k3_clks 62 3>;  /* icssg0_iclk */
+					assigned-clocks = <&icssg0_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 62 3>;
+				};
+
+				icssg0_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 62 10>,	/* icssg0_iep_clk */
+						 <&icssg0_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg0_iepclk_mux>;
+					assigned-clock-parents = <&icssg0_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg0_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg0_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg0_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru0_0: pru@34000 {
+			compatible = "ti,am654-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru0_0-fw";
+		};
+
+		rtu0_0: rtu@4000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu0_0-fw";
+		};
+
+		tx_pru0_0: txpru@a000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru0_0-fw";
+		};
+
+		pru0_1: pru@38000 {
+			compatible = "ti,am654-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru0_1-fw";
+		};
+
+		rtu0_1: rtu@6000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu0_1-fw";
+		};
+
+		tx_pru0_1: txpru@c000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru0_1-fw";
+		};
+
+		icssg0_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 62 3>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	icssg1: icssg@b100000 {
+		compatible = "ti,am654-icssg";
+		reg = <0x00 0xb100000 0x00 0x80000>;
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0xb100000 0x80000>;
+
+		icssg1_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg1_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg1_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 63 19>, /* icssg1_core_clk */
+						 <&k3_clks 63 3>;  /* icssg1_iclk */
+					assigned-clocks = <&icssg1_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 63 3>;
+				};
+
+				icssg1_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 63 10>,	/* icssg1_iep_clk */
+						 <&icssg1_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg1_iepclk_mux>;
+					assigned-clock-parents = <&icssg1_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg1_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg1_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg1_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru1_0: pru@34000 {
+			compatible = "ti,am654-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru1_0-fw";
+		};
+
+		rtu1_0: rtu@4000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu1_0-fw";
+		};
+
+		tx_pru1_0: txpru@a000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru1_0-fw";
+		};
+
+		pru1_1: pru@38000 {
+			compatible = "ti,am654-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru1_1-fw";
+		};
+
+		rtu1_1: rtu@6000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu1_1-fw";
+		};
+
+		tx_pru1_1: txpru@c000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru1_1-fw";
+		};
+
+		icssg1_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 63 3>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	icssg2: icssg@b200000 {
+		compatible = "ti,am654-icssg";
+		reg = <0x00 0xb200000 0x00 0x80000>;
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0xb200000 0x80000>;
+
+		icssg2_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg2_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg2_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 64 19>, /* icssg1_core_clk */
+						 <&k3_clks 64 3>;  /* icssg1_iclk */
+					assigned-clocks = <&icssg2_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 64 3>;
+				};
+
+				icssg2_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 64 10>,	/* icssg1_iep_clk */
+						 <&icssg2_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg2_iepclk_mux>;
+					assigned-clock-parents = <&icssg2_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg2_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg2_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg2_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru2_0: pru@34000 {
+			compatible = "ti,am654-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru2_0-fw";
+		};
+
+		rtu2_0: rtu@4000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu2_0-fw";
+		};
+
+		tx_pru2_0: txpru@a000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru2_0-fw";
+		};
+
+		pru2_1: pru@38000 {
+			compatible = "ti,am654-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru2_1-fw";
+		};
+
+		rtu2_1: rtu@6000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu2_1-fw";
+		};
+
+		tx_pru2_1: txpru@c000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru2_1-fw";
+		};
+
+		icssg2_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 64 3>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
new file mode 100644
index 0000000000..1e536dc41f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_conf: scm-conf@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04200 0x0 0x10>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000101>;
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04280 0x0 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000003>;
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x80000>;
+		ranges = <0x0 0x00 0x41c00000 0x80000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 114 1>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40300000 0x0 0x400>;
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 142 1>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40310000 0x0 0x400>;
+		interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 143 1>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40320000 0x0 0x400>;
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 144 1>;
+		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 0 2>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&mcu_udmap 0x7100>,
+			<&mcu_udmap 0x7101 >;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 1 2>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&mcu_udmap 0x7102>,
+			<&mcu_udmap 0x7103>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		clocks = <&k3_clks 35 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		clocks = <&k3_clks 36 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		clocks = <&k3_clks 37 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		clocks = <&k3_clks 38 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <119>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x2b800000 0x0 0x400000>,
+			      <0x0 0x2b000000 0x0 0x400000>,
+			      <0x0 0x28590000 0x0 0x100>,
+			      <0x0 0x2a500000 0x0 0x40000>,
+			      <0x0 0x28440000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg",
+				    "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <195>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,am654-navss-mcu-udmap";
+			reg = <0x0 0x285c0000 0x0 0x100>,
+			      <0x0 0x2a800000 0x0 0x40000>,
+			      <0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <194>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+						<0xd>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+						<0xa>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x0 0x2a480000 0x0 0x80000>,
+		      <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	m_can0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x0 0x40528000 0x0 0x400>,
+		      <0x0 0x40500000 0x0 0x4400>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 5>, <&k3_clks 102 0>;
+		clock-names = "hclk", "cclk";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	m_can1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x0 0x40568000 0x0 0x400>,
+		      <0x0 0x40540000 0x0 0x4400>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 5>, <&k3_clks 103 0>;
+		clock-names = "hclk", "cclk";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	fss: bus@47000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 248 0>;
+			assigned-clocks = <&k3_clks 248 0>;
+			assigned-clock-parents = <&k3_clks 248 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 249 6>;
+			power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,am654-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 5 10>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 5 10>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&mcu_cpsw_cpts_mux>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 570 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+
+			mcu_cpsw_cpts_mux: refclk-mux {
+				#clock-cells = <0>;
+				clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+					<&k3_clks 118 6>, <&k3_clks 118 3>,
+					<&k3_clks 118 8>, <&k3_clks 118 14>,
+					<&k3_clks 120 3>, <&k3_clks 121 3>;
+				assigned-clocks = <&mcu_cpsw_cpts_mux>;
+				assigned-clock-parents = <&k3_clks 118 5>;
+			};
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,am654-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,am654-r5f";
+			reg = <0x41000000 0x00008000>,
+			      <0x41010000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <159>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 159 1>;
+			firmware-name = "am65x-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,am654-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "am65x-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	mcu_rti1: watchdog@40610000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x40610000 0x0 0x100>;
+		clocks = <&k3_clks 135 0>;
+		power-domains = <&k3_pds 135 TI_SCI_PD_SHARED>;
+		assigned-clocks = <&k3_clks 135 0>;
+		assigned-clock-parents = <&k3_clks 135 4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
new file mode 100644
index 0000000000..fd2b998ebd
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	dmsc: system-controller@44083000 {
+		compatible = "ti,am654-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x44083000 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x43000014 0x4>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		reg = <0x4301c000 0x118>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,am654-uart";
+		reg = <0x42300000 0x100>;
+		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x42120000 0x100>;
+		interrupts = <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 115 1>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	intr_wkup_gpio: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x42200000 0x200>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <156>;
+		ti,interrupt-ranges = <0 712 16>;
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x42110000 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_wkup_gpio>;
+		interrupts = <60>, <61>, <62>, <63>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <56>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 59 0>;
+		clock-names = "gpio";
+	};
+
+	wkup_vtm0: temperature-sensor@42050000 {
+		compatible = "ti,am654-vtm";
+		reg = <0x42050000 0x25c>;
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
new file mode 100644
index 0000000000..4d7b6155a7
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM654 SoC";
+	compatible = "ti,am654";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
+			 /* MCUSS Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
+
+		cbass_mcu: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /*  FSS OSPI0 data region 1 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
+
+			cbass_wakeup: bus@42040000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				/* WKUP  Basic peripherals */
+				ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
+			};
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am65-main.dtsi"
+#include "k3-am65-mcu.dtsi"
+#include "k3-am65-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
new file mode 100644
index 0000000000..5ab434c02a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic variant, PG1 and PG2
+ */
+
+#include "k3-am65-iot2050-common.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 1G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+	};
+
+	cpus {
+		cpu-map {
+			/delete-node/ cluster1;
+		};
+		/delete-node/ cpu@100;
+		/delete-node/ cpu@101;
+	};
+
+	/delete-node/ l2-cache1;
+};
+
+/* eMMC */
+&sdhci0 {
+	status = "disabled";
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01e4, PIN_INPUT,  0)  /* (AF11) UART0_RXD */
+			AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0)  /* (AE11) UART0_TXD */
+			AM65X_IOPAD(0x01ec, PIN_INPUT,  0)  /* (AG11) UART0_CTSn */
+			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)  /* (AD11) UART0_RTSn */
+			AM65X_IOPAD(0x0188, PIN_INPUT,  1)  /* (D25) UART0_DCDn */
+			AM65X_IOPAD(0x018c, PIN_INPUT,  1)  /* (B26) UART0_DSRn */
+			AM65X_IOPAD(0x0190, PIN_OUTPUT, 1)  /* (A24) UART0_DTRn */
+			AM65X_IOPAD(0x0194, PIN_INPUT,  1)  /* (E24) UART0_RIN */
+		>;
+	};
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on Basic boards */
+	ti,cluster-mode = <0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
new file mode 100644
index 0000000000..c62549a4b4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 2
+ * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6528-iot2050-basic-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-basic-pg2", "ti,am654";
+	model = "SIMATIC IOT2050 Basic PG2";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
new file mode 100644
index 0000000000..87928ff282
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 1
+ * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6528-iot2050-basic-common.dtsi"
+#include "k3-am65-iot2050-common-pg1.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-basic", "ti,am654";
+	model = "SIMATIC IOT2050 Basic";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
new file mode 100644
index 0000000000..3be92c39ec
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM.
+ * Panel Link: https://www.digimax.it/en/tft-lcd/20881-RK101II01D-CT
+ * AM654 LCD EVM: https://www.ti.com/tool/TMDSLCD1EVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	display0 {
+		compatible = "rocktech,rk101ii01d-ct";
+		backlight = <&lcd_bl>;
+		enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
+		port {
+			lcd_in0: endpoint {
+				remote-endpoint = <&oldi_out0>;
+			};
+		};
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels =
+			<0 32 64 96 128 160 192 224 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+
+		oldi_out0: endpoint {
+			remote-endpoint = <&lcd_in0>;
+		};
+	};
+};
+
+&main_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt928";
+		reg = <0x14>;
+
+		interrupt-parent = <&pca9554>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+
+		reset-gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&pca9554 3 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
new file mode 100644
index 0000000000..f5c26e9fba
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am654.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,am654-evm", "ti,am654";
+	model = "Texas Instruments AM654 Base Board";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &main_i2c0;
+		i2c3 = &main_i2c1;
+		i2c4 = &main_i2c2;
+		ethernet0 = &cpsw_port1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: secure-ddr@9e800000 {
+			reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0100000 0 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1100000 0 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a2000000 {
+			reg = <0x00 0xa2000000 0x00 0x00100000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&push_button_pins_default>;
+
+		switch-5 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-6 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	evm_12v0: regulator-0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc3v3_io: regulator-1 {
+		/* Output of TPS54334 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&evm_12v0>;
+	};
+
+	vdd_mmc1_sd: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc3v3_io>;
+		gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	vtt_supply: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ddr_vtt_pins_default>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_io>;
+		gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&wkup_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0)	/* (AB1) WKUP_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0)	/* (AB5) WKUP_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1)	/* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1)	/* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+		>;
+	};
+
+	ddr_vtt_pins_default: ddr-vtt-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7)	/* WKUP_GPIO0_28 */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
+		>;
+	};
+
+	push_button_pins_default: push-button-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
+			AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)	 /* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* (T2) MCU_OSPI0_D2 */
+			AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* (T3) MCU_OSPI0_D3 */
+			AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* (T4) MCU_OSPI0_D4 */
+			AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* (T5) MCU_OSPI0_D5 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* (R2) MCU_OSPI0_D6 */
+			AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* (R3) MCU_OSPI0_D7 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+		>;
+	};
+
+	wkup_pca554_default: wkup-pca554-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)	/* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)	/* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)	/* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)	/* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
+			AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
+			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
+			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
+			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
+			AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
+			AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
+			AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */
+			AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+			AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT,  0) /* (AD8) MCU_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT,  0) /* (AD7) MCU_I2C0_SDA */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01e4, PIN_INPUT, 0)	/* (AF11) UART0_RXD */
+			AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0)	/* (AE11) UART0_TXD */
+			AM65X_IOPAD(0x01ec, PIN_INPUT, 0)	/* (AG11) UART0_CTSn */
+			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)	/* (AD11) UART0_RTSn */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */
+			AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */
+		>;
+	};
+
+	main_spi0_pins_default: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
+			AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
+			AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */
+			AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
+			AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
+			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
+			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
+			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
+			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
+			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
+			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
+			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
+			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
+			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
+			AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
+			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
+			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
+			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
+			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
+			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
+			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
+			AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
+		>;
+	};
+
+	usb1_pins_default: usb1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
+			AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
+			AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
+		>;
+	};
+
+	ecap0_pins_default: ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* AT24CM01 */
+		compatible = "atmel,24c1024";
+		reg = <0x50>;
+	};
+
+	vdd_mpu: regulator@60 {
+		compatible = "ti,tps62363";
+		reg = <0x60>;
+		regulator-name = "VDD_MPU";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1770000>;
+		regulator-always-on;
+		regulator-boot-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		ti,enable-vout-discharge;
+	};
+
+	pca9554: gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wkup_pca554_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mcu_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	pca9555: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&main_spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi0_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ti,pindir-d0-out-d1-in;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <48000000>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+/*
+ * Because of erratas i2025 and i2026 for silicon revision 1.0, the
+ * SD card interface might fail. Boards with sr1.0 are recommended to
+ * disable sdhci1
+ */
+&sdhci1 {
+	vmmc-supply = <&vdd_mmc1_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+	dr_mode = "otg";
+};
+
+&dwc3_0 {
+	status = "disabled";
+};
+
+&usb0_phy {
+	status = "disabled";
+};
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&serdes0 {
+	status = "disabled";
+};
+
+&serdes1 {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+};
+
+&mcu_r5fss0_core1 {
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x20000>;
+			};
+
+			partition@6a0000 {
+				label = "ospi.env.backup";
+				reg = <0x6a0000 0x20000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fe0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fe0000 0x20000>;
+			};
+		};
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
new file mode 100644
index 0000000000..9021c73805
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+mpu0_thermal: mpu0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		mpu0_crit: mpu0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+mpu1_thermal: mpu1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		mpu1_crit: mpu1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+mcu_thermal: mcu-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		mcu_crit: mcu-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi
new file mode 100644
index 0000000000..888567b921
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC family in Quad core configuration
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1: cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu3: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	L2_1: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-am654-industrial-thermal.dtsi"
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
new file mode 100644
index 0000000000..be55494b1f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Advanced variant, PG1 and PG2
+ */
+
+/dts-v1/;
+
+#include "k3-am65-iot2050-common.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+};
+
+&main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)  /* (B25) MMC0_CLK */
+			AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP,   0)  /* (B27) MMC0_CMD */
+			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP,   0)  /* (A26) MMC0_DAT0 */
+			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP,   0)  /* (E25) MMC0_DAT1 */
+			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP,   0)  /* (C26) MMC0_DAT2 */
+			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP,   0)  /* (A25) MMC0_DAT3 */
+			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP,   0)  /* (E24) MMC0_DAT4 */
+			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP,   0)  /* (A24) MMC0_DAT5 */
+			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP,   0)  /* (B26) MMC0_DAT6 */
+			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP,   0)  /* (D25) MMC0_DAT7 */
+			AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP,  7)  /* (B23) MMC0_SDWP */
+			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP,   0)  /* (A23) MMC0_SDCD */
+			AM65X_IOPAD(0x01b0, PIN_INPUT,          0)  /* (C25) MMC0_DS */
+		>;
+	};
+};
+
+/* eMMC */
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
new file mode 100644
index 0000000000..774eb14ac9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2023
+ *
+ * Authors:
+ *   Chao Zeng <chao.zeng@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 M.2 variant (based on Advanced Product
+ * Generation 2), 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced-m2", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced M2";
+};
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on this board */
+	ti,cluster-mode = <0>;
+};
+
+&main_pmx0 {
+	main_m2_enable_pins_default: main-m2-enable-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
+		>;
+	};
+
+	main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
+		>;
+	};
+
+	main_pmx0_m2_config_pins_default: main-pmx0-m2-config-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c8, PIN_INPUT_PULLUP, 7)  /* (AE13) GPIO1_18 */
+			AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7)  /* (AD13) GPIO1_19 */
+		>;
+	};
+
+	main_m2_pcie_mux_control: main-m2-pcie-mux-control-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7)  /* (AG22) GPIO0_82 */
+			AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7)  /* (AE20) GPIO0_88 */
+			AM65X_IOPAD(0x0164, PIN_INPUT_PULLUP, 7)  /* (AF19) GPIO0_89 */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_pmx1_m2_config_pins_default: main-pmx1-m2-config-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0018, PIN_INPUT_PULLUP, 7)  /* (B22) GPIO1_88 */
+			AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7)  /* (C23) GPIO1_89 */
+		>;
+	};
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&main_m2_pcie_mux_control>,
+		<&arduino_io_d4_to_d9_pins_default>;
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&main_m2_enable_pins_default>,
+		<&main_pmx0_m2_config_pins_default>,
+		<&main_pmx1_m2_config_pins_default>,
+		<&cp2102n_reset_pin_default>;
+};
+
+/*
+ * Base configuration for B-key slot with PCIe x2, E-key with USB 2.0 only.
+ * Firmware switches to other modes via device tree overlays.
+ */
+
+&serdes0 {
+	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+};
+
+&pcie0_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_bkey_pcie_reset>;
+
+	num-lanes = <2>;
+	phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy0","pcie-phy1";
+	reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie1_rc {
+	status = "disabled";
+};
+
+&dwc3_0 {
+	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+				 <&k3_clks 151 9>;  /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&usb0 {
+	maximum-speed = "high-speed";
+	/delete-property/ snps,dis-u1-entry-quirk;
+	/delete-property/ snps,dis-u2-entry-quirk;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
new file mode 100644
index 0000000000..f00dc86d01
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 2
+ * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced-pg2", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced PG2";
+};
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on this board */
+	ti,cluster-mode = <0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
new file mode 100644
index 0000000000..077f165bdc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 1
+ * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg1.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
new file mode 100644
index 0000000000..5df5946687
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Base Board: https://www.ti.com/lit/zip/SPRR463
+ */
+
+/dts-v1/;
+
+#include "k3-am68-sk-som.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,am68-sk", "ti,j721s2";
+	model = "Texas Instruments AM68 SK";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc1 = &main_sdhci1;
+		can0 = &mcu_mcan0;
+		can1 = &mcu_mcan1;
+		can2 = &main_mcan6;
+		can3 = &main_mcan7;
+	};
+
+	vusb_main: regulator-vusb-main5v0 {
+		/* USB MAIN INPUT 5V DC */
+		compatible = "regulator-fixed";
+		regulator-name = "vusb-main5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-vsys3v3 {
+		/* Output of LM5141 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-tlv71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+		gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	vsys_io_1v8: regulator-vsys-io-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_io_1v2: regulator-vsys-io-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver2: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver3: can-phy2 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver4: can-phy3 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins_default>;
+		ddc-i2c-bus = <&mcu_i2c1>;
+		/* HDMI_HPD */
+		hpd-gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	bridge-dvi {
+		compatible = "ti,tfp410";
+		/* HDMI_PDn */
+		powerdown-gpios = <&exp2 0 GPIO_ACTIVE_LOW>;
+		ti,deskew = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out0>;
+					pclk-sample = <1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	main_uart8_pins_default: main-uart8-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
+			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0e0, PIN_INPUT, 0) /* (AH25) I2C0_SCL */
+			J721S2_IOPAD(0x0e4, PIN_INPUT, 0) /* (AE24) I2C0_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
+			J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
+			J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
+			J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
+			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
+			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c4, PIN_INPUT, 7) /* (AB26) ECAP0_IN_APWM_OUT.GPIO0_49 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */
+		>;
+	};
+
+	main_mcan6_pins_default: main-mcan6-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x098, PIN_INPUT, 0) /* (V25) MCASP0_AXR10.MCAN6_RX */
+			J721S2_IOPAD(0x094, PIN_INPUT, 0) /* (AA25) MCASP0_AXR9.MCAN6_TX */
+		>;
+	};
+
+	main_mcan7_pins_default: main-mcan7-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0a0, PIN_INPUT, 0) /* (AB25) MCASP0_AXR12.MCAN7_RX */
+			J721S2_IOPAD(0x09c, PIN_INPUT, 0) /* (T24) MCASP0_AXR11.MCAN7_TX */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) MCAN13_RX.I2C4_SDA */
+			J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) MCAN14_TX.I2C4_SCL */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0a8, PIN_INPUT, 7) /* (U24)  MCASP0_AXR14.GPIO0_42 */
+			J721S2_IOPAD(0x090, PIN_INPUT, 7) /* (W24) MCASP0_AXR8.GPIO0_36 */
+			J721S2_IOPAD(0x0bc, PIN_INPUT, 7) /* (V28) MCASP1_AFSX.GPIO0_47 */
+			J721S2_IOPAD(0x06c, PIN_INPUT, 7) /* (V26) MCAN1_TX.GPIO0_27 */
+			J721S2_IOPAD(0x004, PIN_INPUT, 7) /* (W25) MCAN12_TX.GPIO0_1 */
+			J721S2_IOPAD(0x008, PIN_INPUT, 7) /* (AC24) MCAN12_RX.GPIO0_2 */
+			J721S2_IOPAD(0x0b8, PIN_INPUT, 7) /* (AA24) MCASP1_ACLKX.GPIO0_46 */
+			J721S2_IOPAD(0x00c, PIN_INPUT, 7) /* (AE28) MCAN13_TX.GPIO0_3 */
+			J721S2_IOPAD(0x034, PIN_INPUT, 7) /* (AD24) PMIC_WAKE0.GPIO0_13 */
+			J721S2_IOPAD(0x0a4, PIN_INPUT, 7) /* (T23) MCASP0_AXR13.GPIO0_41 */
+			J721S2_IOPAD(0x0c0, PIN_INPUT, 7) /* (T28) MCASP1_AXR0.GPIO0_48 */
+			J721S2_IOPAD(0x0b4, PIN_INPUT, 7) /* (U25) MCASP1_AXR4.GPIO0_45 */
+			J721S2_IOPAD(0x0cc, PIN_INPUT, 7) /* (AE27) SPI0_CS0.GPIO0_51 */
+			J721S2_IOPAD(0x08c, PIN_INPUT, 7) /* (T25) MCASP0_AXR7.GPIO0_35 */
+		>;
+	};
+
+	dss_vout0_pins_default: dss-vout0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x074, PIN_OUTPUT, 2) /* (R28) MCAN2_TX.VOUT0_DATA0 */
+			J721S2_IOPAD(0x070, PIN_OUTPUT, 2) /* (R27) MCAN1_RX.VOUT0_DATA1 */
+			J721S2_IOPAD(0x04c, PIN_OUTPUT, 2) /* (V27) MCASP1_AXR1.VOUT0_DATA10 */
+			J721S2_IOPAD(0x048, PIN_OUTPUT, 2) /* (AB27) MCASP0_AXR2.VOUT0_DATA11 */
+			J721S2_IOPAD(0x044, PIN_OUTPUT, 2) /* (Y26) MCASP0_AXR1.VOUT0_DATA12 */
+			J721S2_IOPAD(0x040, PIN_OUTPUT, 2) /* (AC28) MCASP0_AXR0.VOUT0_DATA13 */
+			J721S2_IOPAD(0x03c, PIN_OUTPUT, 2) /* (U27) MCASP0_AFSX.VOUT0_DATA14 */
+			J721S2_IOPAD(0x038, PIN_OUTPUT, 2) /* (AB28) MCASP0_ACLKX.VOUT0_DATA15 */
+			J721S2_IOPAD(0x0c8, PIN_OUTPUT, 2) /* (AD28) EXT_REFCLK1.VOUT0_DATA16 */
+			J721S2_IOPAD(0x030, PIN_OUTPUT, 2) /* (T26) GPIO0_12.VOUT0_DATA17 */
+			J721S2_IOPAD(0x02c, PIN_OUTPUT, 2) /* (V23) GPIO0_11.VOUT0_DATA18 */
+			J721S2_IOPAD(0x028, PIN_OUTPUT, 2) /* (AB24) MCAN16_RX.VOUT0_DATA19 */
+			J721S2_IOPAD(0x07c, PIN_OUTPUT, 2) /* (T27) MCASP0_AXR3.VOUT0_DATA2 */
+			J721S2_IOPAD(0x024, PIN_OUTPUT, 2) /* (Y28) MCAN16_TX.VOUT0_DATA20 */
+			J721S2_IOPAD(0x020, PIN_OUTPUT, 2) /* (AA23) MCAN15_RX.VOUT0_DATA21 */
+			J721S2_IOPAD(0x01c, PIN_OUTPUT, 2) /* (Y24) MCAN15_TX.VOUT0_DATA22 */
+			J721S2_IOPAD(0x018, PIN_OUTPUT, 2) /* (W23) MCAN14_RX.VOUT0_DATA23 */
+			J721S2_IOPAD(0x068, PIN_OUTPUT, 2) /* (U28) MCAN0_RX.VOUT0_DATA3 */
+			J721S2_IOPAD(0x064, PIN_OUTPUT, 2) /* (W28) MCAN0_TX.VOUT0_DATA4 */
+			J721S2_IOPAD(0x060, PIN_OUTPUT, 2) /* (AC27) MCASP2_AXR1.VOUT0_DATA5 */
+			J721S2_IOPAD(0x05c, PIN_OUTPUT, 2) /* (AA26) MCASP2_AXR0.VOUT0_DATA6 */
+			J721S2_IOPAD(0x058, PIN_OUTPUT, 2) /* (AA27) MCASP2_AFSX.VOUT0_DATA7 */
+			J721S2_IOPAD(0x054, PIN_OUTPUT, 2) /* (Y27) MCASP2_ACLKX.VOUT0_DATA8 */
+			J721S2_IOPAD(0x050, PIN_OUTPUT, 2) /* (W27) MCASP1_AXR2.VOUT0_DATA9 */
+			J721S2_IOPAD(0x084, PIN_OUTPUT, 2) /* (AA28) MCASP0_AXR5.VOUT0_DE */
+			J721S2_IOPAD(0x080, PIN_OUTPUT, 2) /* (U26) MCASP0_AXR4.VOUT0_HSYNC */
+			J721S2_IOPAD(0x078, PIN_OUTPUT, 2) /* (Y25) MCAN2_RX.VOUT0_PCLK */
+			J721S2_IOPAD(0x088, PIN_OUTPUT, 2) /* (AD27) MCASP0_AXR6.VOUT0_VP0_VSYNC */
+		>;
+	};
+
+	hdmi_hpd_pins_default: hdmi-hpd-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x000, PIN_INPUT, 7) /* (AG24) EXTINTN.GPIO0_0  */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x02C, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */
+			J721S2_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */
+			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */
+			J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */
+			J721S2_WKUP_IOPAD(0x00C, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
+			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
+			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */
+			J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x06C, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX*/
+		>;
+	};
+
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (G24) MCU_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (J25) MCU_I2C0_SDA */
+		>;
+	};
+
+	mcu_i2c1_pins_default: mcu-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x078, PIN_INPUT, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J721S2_WKUP_IOPAD(0x07c, PIN_INPUT, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-default-pins-0 {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_66 */
+			J721S2_WKUP_IOPAD(0x05C, PIN_INPUT, 7) /* (E24) MCU_SPI1_D0.WKUP_GPIO0_1 */
+			J721S2_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (C28) MCU_SPI1_D1.WKUP_GPIO0_2 */
+			J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (D26) MCU_SPI1_CLK.WKUP_GPIO0_0 */
+			J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 7) /* (D25) MCU_SPI1_CS2.WKUP_GPIO0_15*/
+			J721S2_WKUP_IOPAD(0x0B8, PIN_INPUT, 7) /* (G27) WKUP_GPIO0_56 */
+			J721S2_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (J26) WKUP_GPIO0_57 */
+			J721S2_WKUP_IOPAD(0x11C, PIN_INPUT, 7) /* (J27) WKUP_GPIO0_67 */
+			J721S2_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (C27) MCU_SPI1_CS0.WKUP_GPIO0_3 */
+		>;
+	};
+};
+
+&wkup_pmx3 {
+	mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-default-pins-1 {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */
+		>;
+	};
+};
+
+&main_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_rpi_header_gpio0_pins0_default>, <&mcu_rpi_header_gpio0_pins1_default>;
+};
+
+&wkup_uart0 {
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart8 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+	/* Shared with TFA on this platform */
+	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = " ", " ", " ", " ", " ",
+				  "BOARDID_EEPROM_WP", "CAN_STB", " ",
+				  "GPIO_uSD_PWR_EN", " ", "IO_EXP_PCIe1_M.2_RTSz",
+				  "IO_EXP_MCU_RGMII_RST#", " ", " ", " ", " ";
+	};
+};
+
+&main_i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&mcu_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&mcu_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c1_pins_default>;
+	/* i2c1 is used for DVI DDC, so we need to use 100kHz */
+	clock-frequency = <100000>;
+
+	exp2: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HDMI_PDn","HDMI_LS_OE",
+				  "DP0_3V3_EN","eDP_ENABLE";
+	};
+};
+
+&main_sdhci1 {
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan6 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan6_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&main_mcan7 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan7_pins_default>;
+	phys = <&transceiver4>;
+};
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout0_pins_default>;
+	/*
+	 * These clock assignments are chosen to enable the following outputs:
+	 *
+	 * VP0 - DisplayPort SST
+	 * VP1 - DPI0
+	 * VP2 - DSI
+	 * VP3 - DPI1
+	 */
+	assigned-clocks = <&k3_clks 158 2>,
+			  <&k3_clks 158 5>,
+			  <&k3_clks 158 14>,
+			  <&k3_clks 158 18>;
+	assigned-clock-parents = <&k3_clks 158 3>,
+				 <&k3_clks 158 7>,
+				 <&k3_clks 158 16>,
+				 <&k3_clks 158 22>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* HDMI */
+	port@1 {
+		reg = <1>;
+
+		dpi_out0: endpoint {
+			remote-endpoint = <&tfp410_in>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
new file mode 100644
index 0000000000..6c9139f732
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 16 GB RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x03 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+	};
+};
+
+&wkup_pmx2 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x09c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		/* AT24C512C-MAHM-T */
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
new file mode 100644
index 0000000000..0699370911
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Design Files: https://www.ti.com/lit/zip/SPRR466
+ * TRM: https://www.ti.com/lit/zip/spruj52
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-j784s4.dtsi"
+
+/ {
+	compatible = "ti,am69-sk", "ti,j784s4";
+	model = "Texas Instruments AM69 SK";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c3 = &main_i2c0;
+		ethernet0 = &mcu_cpsw_port1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 32G RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x07 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+	};
+
+	vusb_main: regulator-vusb-main5v0 {
+		/* USB MAIN INPUT 5V DC */
+		compatible = "regulator-fixed";
+		regulator-name = "vusb-main5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-vsys3v3 {
+		/* Output of LM5143 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-tlv71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+};
+
+&main_pmx0 {
+	bootph-all;
+	main_uart8_pins_default: main-uart8-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
+			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
+			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
+			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
+			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
+			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
+			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
+			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
+			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
+			J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0C4, PIN_INPUT, 7) /* (AD36) ECAP0_IN_APWM_OUT.GPIO0_49 */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0BC, PIN_INPUT, 7) /* (AD33) MCASP1_AFSX.GPIO0_47 */
+			J784S4_IOPAD(0x06C, PIN_INPUT, 7) /* (AJ37) MCASP4_AFSX.GPIO0_27 */
+			J784S4_IOPAD(0x0B4, PIN_INPUT, 7) /* (AL34) MCASP1_AXR4.GPIO0_45 */
+			J784S4_IOPAD(0x0C0, PIN_INPUT, 7) /* (AD38) MCASP1_AXR0.GPIO0_48 */
+			J784S4_IOPAD(0x00C, PIN_INPUT, 7) /* (AF33) MCAN13_TX.GPIO0_3 */
+			J784S4_IOPAD(0x0B8, PIN_INPUT, 7) /* (AC34) MCASP1_ACLKX.GPIO0_46 */
+			J784S4_IOPAD(0x090, PIN_INPUT, 7) /* (AC35) MCASP0_AXR8.GPIO0_36 */
+			J784S4_IOPAD(0x0A8, PIN_INPUT, 7) /* (AF34) MCASP0_AXR14.GPIO0_42 */
+			J784S4_IOPAD(0x0A4, PIN_INPUT, 7) /* (AJ36) MCASP0_AXR13.GPIO0_41 */
+			J784S4_IOPAD(0x034, PIN_INPUT, 7) /* (AJ34) PMIC_WAKE0n.GPIO0_13 */
+			J784S4_IOPAD(0x0CC, PIN_INPUT, 7) /* (AM37) SPI0_CS0.GPIO0_51 */
+			J784S4_IOPAD(0x08C, PIN_INPUT, 7) /* (AE35) MCASP0_AXR7.GPIO0_35 */
+			J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */
+			J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	bootph-all;
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT_PULLUP, 0) /* (M35) MCU_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT_PULLUP, 0) /* (G34) MCU_I2C0_SDA */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
+			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
+			J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
+			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
+			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
+			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (N34) WKUP_GPIO0_66 */
+			J784S4_WKUP_IOPAD(0x05c, PIN_INPUT, 7) /* (J34) WKUP_GPIO0_1 */
+			J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */
+			J784S4_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (H38) WKUP_GPIO0_0 */
+			J784S4_WKUP_IOPAD(0x0b8, PIN_INPUT, 7) /* (M37) WKUP_GPIO0_56 */
+			J784S4_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (M36) WKUP_GPIO0_57 */
+			J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 7) /* (K37) WKUP_GPIO0_15 */
+			J784S4_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (J36) WKUP_GPIO0_3 */
+			J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */
+		>;
+	};
+};
+
+&wkup_pmx3 {
+	mcu_rpi_hdr2_gpio0_pins_default: mcu-rpi-hdr2-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0, PIN_INPUT, 7) /* (M33) WKUP_GPIO0_49 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Firmware usage */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&wkup_i2c0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		/* AT24C512C-MAHM-T */
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_rpi_hdr1_gpio0_pins_default>, <&mcu_rpi_hdr2_gpio0_pins_default>;
+};
+
+&mcu_uart0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&mcu_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_uart8 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names	= "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
+				"IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#",
+				"IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz",
+				"PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz",
+				"ENET1_I2CMUX_SEL", "PCIe0_CLKREQ#", "PCIe1_M.2_CLKREQ#",
+				"PCIe3_M2_CLKREQ#", "PCIe0_PRSNT2#_1", "PCIe0_PRSNT2#_2";
+	};
+};
+
+&main_sdhci0 {
+	bootph-all;
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	bootph-all;
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&main_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
+};
+
+&mcu_cpsw {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	mcu_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mcu_cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&mcu_phy0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
new file mode 100644
index 0000000000..cee2b4b0eb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,j7200-evm", "ti,j7200";
+	model = "Texas Instruments J7200 EVM";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial5 = &main_uart3;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 55 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+};
+
+&wkup_pmx0 {
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+			J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+		>;
+	};
+
+	wkup_gpio_pins_default: wkup-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x70, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
+			J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */
+			J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */
+			J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xb8, PIN_INPUT, 0) /* (T18) UART1_RXD */
+			J721E_IOPAD(0xbc, PIN_INPUT, 0) /* (T20) UART1_TXD */
+		>;
+	};
+
+	main_uart3_pins_default: main-uart3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x60, PIN_INPUT, 11) /* (T15) MCAN8_TX.UART3_CTSn */
+			J721E_IOPAD(0x30, PIN_INPUT, 11) /* (Y18) MCAN2_TX.UART3_RXD */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */
+			J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
+			J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
+			J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */
+			J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */
+			J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */
+			J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */
+			J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	clock-frequency = <96000000>;
+};
+
+&main_uart0 {
+	status = "okay";
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_uart2 {
+	/* MAIN UART 2 is used by R5F firmware */
+	status = "reserved";
+};
+
+&main_uart3 {
+	/* Shared with MCAN Interface */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart3_pins_default>;
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_gpio_pins_default>;
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+/*
+ * The j7200 CPB board is identical to the CPB used for J721E, the SOMs can be
+ * swapped on the CPB.
+ *
+ * main_i2c1 of J7200 is connected to the CPB i2c bus labeled as i2c3.
+ * The i2c1 of the CPB (as it is labeled) is not connected to j7200.
+ */
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CODEC_RSTz", "CODEC_SPARE1", "UB926_RESETn",
+				  "UB926_LOCK", "UB926_PWR_SW_CNTRL",
+				  "UB926_TUNER_RESET", "UB926_GPIO_SPARE", "";
+	};
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
+};
+
+&usb_serdes_mux {
+	idle-states = <1>; /* USB0 to SERDES lane 3 */
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&tscadc0 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_qsgmii_link: phy@1 {
+		reg = <2>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_QSGMII>;
+		resets = <&serdes_wiz0 3>;
+	};
+};
+
+&pcie1_rc {
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie1_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso
new file mode 100644
index 0000000000..32d905235e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for CPSW5G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
+ * J7200 board.
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "k3-pinctrl.h"
+#include "k3-serdes.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
+		ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3";
+		ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4";
+	};
+};
+
+&cpsw0 {
+	status = "okay";
+};
+
+&cpsw0_port1 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy0>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 1>;
+};
+
+&cpsw0_port2 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy1>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 2>;
+};
+
+&cpsw0_port3 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy2>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 3>;
+};
+
+&cpsw0_port4 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy3>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 4>;
+};
+
+&cpsw5g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_pins_default>;
+	reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>;
+	reset-post-delay-us = <120000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpsw5g_phy0: ethernet-phy@16 {
+		reg = <16>;
+	};
+	cpsw5g_phy1: ethernet-phy@17 {
+		reg = <17>;
+	};
+	cpsw5g_phy2: ethernet-phy@18 {
+		reg = <18>;
+	};
+	cpsw5g_phy3: ethernet-phy@19 {
+		reg = <19>;
+	};
+};
+
+&exp2 {
+	qsgmii-line-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "qsgmii-pwrdn-line";
+	};
+};
+
+&main_pmx0 {
+	mdio0_pins_default: mdio0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x00a8, PIN_OUTPUT, 5) /* (W19) UART8_TXD.MDIO0_MDC */
+			J721E_IOPAD(0x00a4, PIN_INPUT, 5) /* (W14) UART8_RXD.MDIO0_MDIO */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
new file mode 100644
index 0000000000..cdb1d6b2a9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -0,0 +1,1284 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	serdes_refclk: serdes-refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+	};
+};
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x70000000 0x100000>;
+
+		atf-sram@0 {
+			reg = <0x00 0x20000>;
+		};
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: mux-controller@4080 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
+		};
+
+		cpsw0_phy_gmii_sel: phy@4044 {
+			compatible = "ti,j7200-cpsw5g-phy-gmii-sel";
+			ti,qsgmii-main-ports = <1>;
+			reg = <0x4044 0x10>;
+			#phy-cells = <1>;
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <131>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_navss: bus@30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <199>;
+		dma-coherent;
+		dma-ranges;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x00 0x310e0000 0x00 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <213>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <209>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x00 0x3c000000 0x00 0x400000>,
+			      <0x00 0x38000000 0x00 0x400000>,
+			      <0x00 0x31120000 0x00 0x100>,
+			      <0x00 0x33000000 0x00 0x40000>,
+			      <0x00 0x31080000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x00 0x31150000 0x00 0x100>,
+			      <0x00 0x34000000 0x00 0x100000>,
+			      <0x00 0x35000000 0x00 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x310d0000 0x00 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 201 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	cpsw0: ethernet@c000000 {
+		compatible = "ti,j7200-cpswxg-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0xc000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
+		clocks = <&k3_clks 19 33>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xca00>,
+		       <&main_udmap 0xca01>,
+		       <&main_udmap 0xca02>,
+		       <&main_udmap 0xca03>,
+		       <&main_udmap 0xca04>,
+		       <&main_udmap 0xca05>,
+		       <&main_udmap 0xca06>,
+		       <&main_udmap 0xca07>,
+		       <&main_udmap 0x4a00>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cpsw0_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				status = "disabled";
+			};
+
+			cpsw0_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				status = "disabled";
+			};
+
+			cpsw0_port3: port@3 {
+				reg = <3>;
+				ti,mac-only;
+				label = "port3";
+				status = "disabled";
+			};
+
+			cpsw0_port4: port@4 {
+				reg = <4>;
+				ti,mac-only;
+				label = "port4";
+				status = "disabled";
+			};
+		};
+
+		cpsw5g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 19 33>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 19 16>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104200 0x0 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x000001ff>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104280 0x0 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c000 0x00 0x10c>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx1: pinctrl@11c11c {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c11c 0x00 0xc>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 281 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 282 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 283 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 284 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 285 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 286 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2000000 0x00 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 1>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2010000 0x00 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 1>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2020000 0x00 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 1>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2030000 0x00 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 1>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2040000 0x00 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 1>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2050000 0x00 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 1>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2060000 0x00 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 1>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j7200-sdhci-8bit", "ti,j721e-sdhci-8bit";
+		reg = <0x00 0x04f80000 0x00 0x260>, <0x00 0x4f88000 0x00 0x134>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 91 0>, <&k3_clks 91 3>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,strobe-sel = <0x77>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j7200-sdhci-4bit", "ti,j721e-sdhci-4bit";
+		reg = <0x00 0x04fb0000 0x00 0x260>, <0x00 0x4fb8000 0x00 0x134>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 92 1>, <&k3_clks 92 2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	serdes_wiz0: wiz@5060000 {
+		compatible = "ti,j721e-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 292 11>, <&k3_clks 292 85>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+		assigned-clocks = <&k3_clks 292 85>;
+		assigned-clock-parents = <&k3_clks 292 89>;
+
+		wiz0_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_pll0_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_pll1_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_refclk_dig";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz0_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		serdes0: serdes@5060000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05060000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&wiz0_pll0_refclk>;
+			clock-names = "refclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 6>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		cdns,no-bar-match-nbits = <64>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00f>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+	};
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 6>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+	};
+
+	usbss0: cdns-usb@4104000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4104000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 288 12>, <&k3_clks 288 3>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 288 12>;	/* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb0: usb@6000000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6000000 0x00 0x10000>,
+			      <0x00 0x6010000 0x00 0x10000>,
+			      <0x00 0x6020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+			cdns,phyrst-a-enable;
+		};
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>,
+			     <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>,
+			     <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>,
+			     <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 109 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>,
+			     <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 266 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 267 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 268 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 269 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 270 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 271 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 272 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 273 1>;
+		status = "disabled";
+	};
+
+	watchdog0: watchdog@2200000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2200000 0x0 0x100>;
+		clocks = <&k3_clks 252 1>;
+		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 252 1>;
+		assigned-clock-parents = <&k3_clks 252 5>;
+	};
+
+	watchdog1: watchdog@2210000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		clocks = <&k3_clks 253 1>;
+		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 253 1>;
+		assigned-clock-parents = <&k3_clks 253 5>;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 49 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 49 1>;
+		assigned-clock-parents = <&k3_clks 49 2>;
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 50 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 50 1>, <&k3_clks 313 0>;
+		assigned-clock-parents = <&k3_clks 50 2>, <&k3_clks 313 1>;
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 51 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 51 1>;
+		assigned-clock-parents = <&k3_clks 51 2>;
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 52 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 52 1>, <&k3_clks 314 0>;
+		assigned-clock-parents = <&k3_clks 52 2>, <&k3_clks 314 1>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 53 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 53 1>;
+		assigned-clock-parents = <&k3_clks 53 2>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 54 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 54 1>, <&k3_clks 315 0>;
+		assigned-clock-parents = <&k3_clks 54 2>, <&k3_clks 315 1>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 55 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 55 1>;
+		assigned-clock-parents = <&k3_clks 55 2>;
+		power-domains = <&k3_pds 55 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 57 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 57 1>, <&k3_clks 316 0>;
+		assigned-clock-parents = <&k3_clks 57 2>, <&k3_clks 316 1>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 58 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 58 1>;
+		assigned-clock-parents = <&k3_clks 58 2>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 59 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 59 1>, <&k3_clks 317 0>;
+		assigned-clock-parents = <&k3_clks 59 2>, <&k3_clks 317 1>;
+		power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 60 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 60 1>;
+		assigned-clock-parents = <&k3_clks 60 2>;
+		power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 62 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 62 1>, <&k3_clks 318 0>;
+		assigned-clock-parents = <&k3_clks 62 2>, <&k3_clks 318 1>;
+		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer12: timer@24c0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24c0000 0x00 0x400>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 63 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 63 1>;
+		assigned-clock-parents = <&k3_clks 63 2>;
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer13: timer@24d0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24d0000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 64 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 64 1>, <&k3_clks 319 0>;
+		assigned-clock-parents = <&k3_clks 64 2>, <&k3_clks 319 1>;
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer14: timer@24e0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24e0000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 65 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 65 1>;
+		assigned-clock-parents = <&k3_clks 65 2>;
+		power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer15: timer@24f0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24f0000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 66 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 66 1>, <&k3_clks 320 0>;
+		assigned-clock-parents = <&k3_clks 66 2>, <&k3_clks 320 1>;
+		power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer16: timer@2500000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2500000 0x00 0x400>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 67 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 67 1>;
+		assigned-clock-parents = <&k3_clks 67 2>;
+		power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer17: timer@2510000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2510000 0x00 0x400>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 68 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 68 1>, <&k3_clks 321 0>;
+		assigned-clock-parents = <&k3_clks 68 2>, <&k3_clks 321 1>;
+		power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer18: timer@2520000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2520000 0x00 0x400>;
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 69 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 69 1>;
+		assigned-clock-parents = <&k3_clks 69 2>;
+		power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer19: timer@2530000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2530000 0x00 0x400>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 70 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 70 1>, <&k3_clks 322 0>;
+		assigned-clock-parents = <&k3_clks 70 2>, <&k3_clks 322 1>;
+		power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j7200-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x5c00000 0x00010000>,
+			      <0x5c10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "j7200-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x5d00000 0x00008000>,
+			      <0x5d10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <246>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 246 1>;
+			firmware-name = "j7200-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x0 0x700000 0x0 0x1000>;
+		ti,esm-pins = <656>, <657>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
new file mode 100644
index 0000000000..6ffaf85fa6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: system-controller@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x00 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	mcu_timer0: timer@40400000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 35 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 35 1>;
+		assigned-clock-parents = <&k3_clks 35 2>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer1: timer@40410000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 71 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 71 1>, <&k3_clks 308 0>;
+		assigned-clock-parents = <&k3_clks 71 2>, <&k3_clks 308 1>;
+		power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer2: timer@40420000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 72 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 72 1>;
+		assigned-clock-parents = <&k3_clks 72 2>;
+		power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer3: timer@40430000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 73 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 73 1>, <&k3_clks 309 0>;
+		assigned-clock-parents = <&k3_clks 73 2>, <&k3_clks 309 1>;
+		power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer4: timer@40440000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40440000 0x00 0x400>;
+		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 74 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 74 1>;
+		assigned-clock-parents = <&k3_clks 74 2>;
+		power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer5: timer@40450000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40450000 0x00 0x400>;
+		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 75 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 75 1>, <&k3_clks 310 0>;
+		assigned-clock-parents = <&k3_clks 75 2>, <&k3_clks 310 1>;
+		power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer6: timer@40460000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40460000 0x00 0x400>;
+		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 76 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 76 1>;
+		assigned-clock-parents = <&k3_clks 76 2>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer7: timer@40470000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40470000 0x00 0x400>;
+		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 77 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 77 1>, <&k3_clks 311 0>;
+		assigned-clock-parents = <&k3_clks 77 2>, <&k3_clks 311 1>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer8: timer@40480000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40480000 0x00 0x400>;
+		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 78 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 78 1>;
+		assigned-clock-parents = <&k3_clks 78 2>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer9: timer@40490000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40490000 0x00 0x400>;
+		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 79 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 79 1>, <&k3_clks 312 0>;
+		assigned-clock-parents = <&k3_clks 79 2>, <&k3_clks 312 1>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x40f00000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x00 0x43000014 0x00 0x4>;
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04200 0x0 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000F>;
+		status = "reserved";
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04280 0x0 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000F>;
+		status = "reserved";
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x34>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx1: pinctrl@4301c038 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c038 0x00 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx2: pinctrl@4301c068 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c068 0x00 0xec>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx3: pinctrl@4301c174 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c174 0x00 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x00 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 287 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	wkup_gpio_intr: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <137>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42110000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <85>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42100000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <85>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x00 0x2b800000 0x00 0x400000>,
+			      <0x00 0x2b000000 0x00 0x400000>,
+			      <0x00 0x28590000 0x00 0x100>,
+			      <0x00 0x2a500000 0x00 0x40000>,
+			      <0x00 0x28440000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg",
+				    "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg = <0x00 0x285c0000 0x00 0x100>,
+			      <0x00 0x2a800000 0x00 0x40000>,
+			      <0x00 0x2aa00000 0x00 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x0 0x2a480000 0x0 0x80000>,
+		      <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0x46000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 18 21>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 18 21>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 18 2>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b00000 0x00 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 1>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b10000 0x00 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 1>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x42120000 0x00 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 1>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 274 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 275 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 0>;
+		status = "disabled";
+	};
+
+	fss: syscon@47000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x47000000 0x00 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: hbmc-mux {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+		};
+
+		hbmc: hyperbus@47034000 {
+			compatible = "ti,am654-hbmc";
+			reg = <0x00 0x47034000 0x00 0x100>,
+				<0x05 0x00000000 0x01 0x0000000>;
+			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+			clocks = <&k3_clks 102 0>;
+			assigned-clocks = <&k3_clks 102 5>;
+			assigned-clock-rates = <333333333>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			mux-controls = <&hbmc_mux 0>;
+		};
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+			      <0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 103 0>;
+			assigned-clocks = <&k3_clks 103 0>;
+			assigned-clock-parents = <&k3_clks 103 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40200000 0x00 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 1>;
+		assigned-clocks = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,j7200-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x41000000 0x00010000>,
+			      <0x41010000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <250>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 250 1>;
+			firmware-name = "j7200-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <251>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 251 1>;
+			firmware-name = "j7200-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	mcu_crypto: crypto@40900000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		power-domains = <&k3_pds 265 TI_SCI_PD_SHARED>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+		dmas = <&mcu_udmap 0xf501>, <&mcu_udmap 0x7502>,
+		       <&mcu_udmap 0x7503>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@40910000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x40910000 0x00 0x7d>;
+			interrupts = <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled"; /* Used by OP-TEE */
+		};
+	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0x42040000 0x00 0x350>,
+		      <0x00 0x42050000 0x00 0x350>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
new file mode 100644
index 0000000000..5a300d4c8b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x00 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a4000000 {
+			reg = <0x00 0xa4000000 0x00 0x00800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&wkup_pmx0 {
+	mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
+			J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
+			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
+			J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
+			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
+			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
+			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
+			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
+			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
+			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
+			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
+			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
+			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+			pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+		>;
+	};
+};
+
+&hbmc {
+	/* OSPI and HBMC are muxed inside FSS, Bootloader will enable
+	 * appropriate node based on board detection
+	 */
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
+	ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
+		 <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
+
+	flash@0,0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0x00 0x00 0x4000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "hbmc.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "hbmc.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "hbmc.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "hbmc.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "hbmc.rootfs";
+				reg = <0x800000 0x3800000>;
+			};
+		};
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp_som: gpio@21 {
+		compatible = "ti,tca6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
+				  "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
+				  "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL",
+				  "GPIO_LIN_EN", "CAN_STB";
+	};
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "ospi.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "ospi.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "ospi.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@740000 {
+				label = "ospi.env.backup";
+				reg = <0x740000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
new file mode 100644
index 0000000000..e7e3a643a6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	mcu_thermal: mcu-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			wkup_crit: wkup-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	mpu_thermal: mpu-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			mpu_crit: mpu-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main_thermal: main-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			c7x_crit: c7x-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
new file mode 100644
index 0000000000..ef73e6d7e8
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 J7200 SoC";
+	compatible = "ti,j7200";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
+		};
+	};
+
+	#include "k3-j7200-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j7200-main.dtsi"
+#include "k3-j7200-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
new file mode 100644
index 0000000000..2f954729f3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -0,0 +1,993 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://beagleboard.org/ai-64
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation
+ * Copyright (C) 2022 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+/ {
+	compatible = "beagle,j721e-beagleboneai64", "ti,j721e";
+	model = "BeagleBoard.org BeagleBone AI-64";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial2 = &main_uart0;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &main_i2c6;
+		i2c2 = &main_i2c2;
+		i2c3 = &main_i2c4;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@aa000000 {
+			reg = <0x00 0xaa000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_pwr_pins_default>;
+
+		button-1 {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&wkup_gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-2 {
+			label = "POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&wkup_gpio0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_default>;
+
+		led-0 {
+			gpios = <&main_gpio0 96 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			gpios = <&main_gpio0 95 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			gpios = <&main_gpio0 97 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CPU;
+			linux,default-trigger = "cpu";
+		};
+
+		led-3 {
+			gpios = <&main_gpio0 110 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			linux,default-trigger = "mmc1";
+		};
+
+		led-4 {
+			gpios = <&main_gpio0 109 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_WLAN;
+			default-state = "off";
+		};
+	};
+
+	evm_12v0: regulator-0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-1 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-2 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_pwr_en_pins_default>;
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&main_gpio0 82 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv_alt: regulator-4 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	dp_pwr_3v3: regulator-5 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp0_3v3_en_pins_default>;
+		regulator-name = "dp-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; /* DP0_PWR_SW_EN */
+		enable-active-high;
+	};
+
+	dp0: connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp_pwr_3v3>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	led_pins_default: led-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x184, PIN_INPUT, 7) /* (T23) RGMII5_RD0.GPIO0_96 */
+			J721E_IOPAD(0x180, PIN_INPUT, 7) /* (R23) RGMII5_RD1.GPIO0_95 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x1bc, PIN_INPUT, 7) /* (V24) MDIO0_MDC.GPIO0_110 */
+			J721E_IOPAD(0x1b8, PIN_INPUT, 7) /* (V26) MDIO0_MDIO.GPIO0_109 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
+			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
+		>;
+	};
+
+	sd_pwr_en_pins_default: sd-pwr-en-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+		>;
+	};
+
+	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 - USBC_DIR */
+		>;
+	};
+
+	main_usbss1_pins_default: main-usbss1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, INPUT_DISABLE, 1) /* (U6) USB0_DRVVBUS.USB1_DRVVBUS */
+		>;
+	};
+
+	dp0_3v3_en_pins_default:dp0-3v3-en-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xc8, PIN_INPUT, 7) /* (AE26) PRG0_PRU0_GPO6.GPIO0_49 */
+		>;
+	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* (Y4) SPI0_CS1.DP0_HPD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x208, PIN_INPUT_PULLUP, 4) /* (W5) MCAN0_RX.I2C2_SCL */
+			J721E_IOPAD(0x20c, PIN_INPUT_PULLUP, 4) /* (W6) MCAN0_TX.I2C2_SDA */
+			J721E_IOPAD(0x138, PIN_INPUT, 7) /* (AE25) PRG0_PRU1_GPO14.GPIO0_77 */
+			J721E_IOPAD(0x13c, PIN_INPUT, 7) /* (AF29) PRG0_PRU1_GPO15.GPIO0_78 */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1e0, PIN_INPUT_PULLUP, 2) /* (Y5) SPI1_D0.I2C4_SCL */
+			J721E_IOPAD(0x1dc, PIN_INPUT_PULLUP, 2) /* (Y1) SPI1_CLK.I2C4_SDA */
+			J721E_IOPAD(0x30, PIN_INPUT, 7) /* (AF24) PRG1_PRU0_GPO11.GPIO0_12 */
+			J721E_IOPAD(0x34, PIN_INPUT, 7) /* (AJ24) PRG1_PRU0_GPO12.GPIO0_13 */
+		>;
+	};
+
+	main_i2c5_pins_default: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	main_i2c6_pins_default: main-i2c6-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+			J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+			J721E_IOPAD(0x74, PIN_INPUT, 7) /* (AC21) PRG1_PRU1_GPO7.GPIO0_28 */
+			J721E_IOPAD(0xa4, PIN_INPUT, 7) /* (AH22) PRG1_PRU1_GPO19.GPIO0_40 */
+		>;
+	};
+
+	csi0_gpio_pins_default: csi0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+		>;
+	};
+
+	csi1_gpio_pins_default: csi1-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1b0, PIN_INPUT_PULLDOWN, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+		>;
+	};
+
+	pcie1_rst_pins_default: pcie1-rst-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x5c, PIN_INPUT, 7) /* (AG23) PRG1_PRU1_GPO1.GPIO0_22 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	eeprom_wp_pins_default: eeprom-wp-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc4, PIN_OUTPUT_PULLUP, 7) /* (G24) WKUP_GPIO0_5 */
+		>;
+	};
+
+	mcu_adc0_pins_default: mcu-adc0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x130, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN0 */
+			J721E_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (K26) MCU_ADC0_AIN1 */
+			J721E_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K28) MCU_ADC0_AIN2 */
+			J721E_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (L28) MCU_ADC0_AIN3 */
+			J721E_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN4 */
+			J721E_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (K27) MCU_ADC0_AIN5 */
+			J721E_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K29) MCU_ADC0_AIN6 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (N23) MCU_ADC1_AIN0 */
+		>;
+	};
+
+	mikro_bus_pins_default: mikro-bus-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x108, PIN_INPUT, 7) /* SDAPULLEN (E26) PMIC_POWER_EN0.WKUP_GPIO0_66 */
+			J721E_WKUP_IOPAD(0xd4, PIN_INPUT, 7) /* SDA (G26) WKUP_GPIO0_9.MCU_I2C1_SDA */
+			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 7) /* SDA (D25) MCU_I3C0_SDA.WKUP_GPIO0_61 */
+			J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* SCL (G27) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 7) /* SCL (D26) MCU_I3C0_SCL.WKUP_GPIO0_60 */
+
+			J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* MOSI (F28) WKUP_GPIO0_2.MCU_SPI1_D1 */
+			J721E_WKUP_IOPAD(0xb4, PIN_INPUT, 7) /* MISO (F25) WKUP_GPIO0_1.MCU_SPI1_D0 */
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* CLK (F26) WKUP_GPIO0_0.MCU_SPI1_CLK */
+			J721E_WKUP_IOPAD(0xbc, PIN_INPUT, 7) /* CS (F27) WKUP_GPIO0_3.MCU_SPI1_CS0 */
+
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 7) /* RX (G22) MCU_OSPI1_D1.WKUP_GPIO0_33 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 7) /* TX (D23) MCU_OSPI1_D2.WKUP_GPIO0_34 */
+
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 7) /* INT (C23) MCU_OSPI1_D3.WKUP_GPIO0_35 */
+			J721E_WKUP_IOPAD(0x54, PIN_INPUT, 7) /* RST (E22) MCU_OSPI1_CSn1.WKUP_GPIO0_37 */
+			J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* PWM (H27) WKUP_GPIO0_11 */
+			J721E_WKUP_IOPAD(0xac, PIN_INPUT, 7) /* AN (C29) MCU_MCAN0_RX.WKUP_GPIO0_59 */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */
+			J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	sw_pwr_pins_default: sw-pwr-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc0, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_4 */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_usbss1_pins_default: mcu-usbss1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x3c, PIN_OUTPUT_PULLUP, 5) /* (A23) MCU_OSPI1_LBCLKO.WKUP_GPIO0_30 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by TIFS firmware. */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD Card */
+	status = "okay";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv_alt>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	/* BBB Header: P9.19 and P9.20 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c4 {
+	/* BBB Header: P9.24 and P9.26 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&main_i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c6 {
+	/* BBB Header: P9.17 and P9.18 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c6_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eeprom_wp_pins_default>;
+	};
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_adc0_pins_default>, <&mcu_adc1_pins_default>,
+		    <&mikro_bus_pins_default>;
+};
+
+&main_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>;
+};
+
+&main_gpio1 {
+	status = "okay";
+};
+
+&usb_serdes_mux {
+	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_IP4_UNUSED>, <J721E_SERDES0_LANE1_IP4_UNUSED>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_LOW>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
+&serdes4 {
+	torrent_phy_dp: phy@0 {
+		reg = <0>;
+		resets = <&serdes_wiz4 1>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		cdns,num-lanes = <4>;
+		cdns,max-bit-rate = <5400>;
+		#phy-cells = <0>;
+	};
+};
+
+&mhdp {
+	phys = <&torrent_phy_dp>;
+	phy-names = "dpphy";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&serdes2 {
+	serdes2_usb_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz2 2>;
+	};
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default>, <&mcu_usbss1_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes2_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&tscadc0 {
+	status = "okay";
+	/* BBB Header: P9.39, P9.40, P9.37, P9.38, P9.33, P9.36, P9.35 */
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	/* MCU mikroBUS Header J10.1 - MCU_ADC1_AIN0 */
+	adc {
+		ti,adc-channels = <0>;
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	/*
+	 * These clock assignments are chosen to enable the following outputs:
+	 *
+	 * VP0 - DisplayPort SST
+	 * VP1 - DPI0
+	 * VP2 - DSI
+	 * VP3 - DPI1
+	 */
+
+	assigned-clocks = <&k3_clks 152 1>,	/* VP 1 pixel clock */
+			  <&k3_clks 152 4>,	/* VP 2 pixel clock */
+			  <&k3_clks 152 9>,	/* VP 3 pixel clock */
+			  <&k3_clks 152 13>;	/* VP 4 pixel clock */
+	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
+				 <&k3_clks 152 6>,	/* PLL19_HSDIV0 */
+				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
+				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
+};
+
+&dss_ports {
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+};
+
+&dp0_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp_connector_in>;
+		};
+	};
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_rst_pins_default>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	max-link-speed = <3>;
+	reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_HIGH>;
+};
+
+&ufs_wrapper {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
new file mode 100644
index 0000000000..fe5207ac7d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -0,0 +1,976 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ */
+
+/dts-v1/;
+
+#include "k3-j721e-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+/ {
+	compatible = "ti,j721e-evm", "ti,j721e";
+	model = "Texas Instruments J721e EVM";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial6 = &main_uart4;
+		ethernet0 = &cpsw_port1;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw10_button_pins_default>, <&sw11_button_pins_default>;
+
+		sw10: switch-10 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		sw11: switch-11 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv_alt: gpio-regulator-TLV71033 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	sound0: sound-0 {
+		compatible = "ti,j721e-cpb-audio";
+		model = "j721e-cpb";
+
+		ti,cpb-mcasp = <&mcasp10>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 184 1>,
+			 <&k3_clks 184 2>, <&k3_clks 184 4>,
+			 <&k3_clks 157 371>,
+			 <&k3_clks 157 400>, <&k3_clks 157 401>;
+		clock-names = "cpb-mcasp-auxclk",
+			      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+			      "cpb-codec-scki",
+			      "cpb-codec-scki-48000", "cpb-codec-scki-44100";
+	};
+
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 54 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver3: can-phy2 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver4: can-phy3 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mcan2_gpio_pins_default>;
+		standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>;
+	};
+
+	dp_pwr_3v3: regulator-dp-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "dp-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; /* P0 - DP0_PWR_SW_EN */
+		enable-active-high;
+	};
+
+	dp0: connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp_pwr_3v3>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d4, PIN_INPUT, 1) /* (Y3) SPI1_CS0.UART0_CTSn */
+			J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */
+			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
+			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */
+			J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */
+		>;
+	};
+
+	main_uart2_pins_default: main-uart2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1dc, PIN_INPUT, 3) /* (Y1) SPI1_CLK.UART2_RXD */
+			J721E_IOPAD(0x1e0, PIN_OUTPUT, 3) /* (Y5) SPI1_D0.UART2_TXD */
+		>;
+	};
+
+	main_uart4_pins_default: main-uart4-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x190, PIN_INPUT, 1) /* (W23) RGMII6_TD3.UART4_RXD */
+			J721E_IOPAD(0x194, PIN_OUTPUT, 1) /* (W28) RGMII6_TD2.UART4_TXD */
+		>;
+	};
+
+	sw10_button_pins_default: sw10-button-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+			J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
+		>;
+	};
+
+	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
+		>;
+	};
+
+	main_usbss1_pins_default: main-usbss1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
+		>;
+	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
+		>;
+	};
+
+	main_i2c1_exp4_pins_default: main-i2c1-exp4-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_i2c6_pins_default: main-i2c6-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+			J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+		>;
+	};
+
+	mcasp10_pins_default: mcasp10-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
+			J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
+			J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */
+			J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */
+			J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */
+			J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
+		>;
+	};
+
+	audi_ext_refclk2_pins_default: audi-ext-refclk2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
+		>;
+	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
+			J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
+		>;
+	};
+
+	main_mcan2_pins_default: main-mcan2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01f0, PIN_INPUT, 3) /* (AC2) MCAN2_RX.GPIO0_123 */
+			J721E_IOPAD(0x01f4, PIN_OUTPUT, 3) /* (AB1) MCAN2_TX.GPIO0_124 */
+		>;
+	};
+
+	main_mcan2_gpio_pins_default: main-mcan2-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xe8, PIN_INPUT, 0) /* (H29) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	sw11_button_pins_default: sw11-button-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+		>;
+	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+			J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+			J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+			J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+			J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+			J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
+			J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* (F26) WKUP_GPIO0_0 */
+			J721E_WKUP_IOPAD(0x98, PIN_INPUT, 7) /* (E28) MCU_SPI0_D1.WKUP_GPIO0_54 */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc4, PIN_INPUT, 0) /* (G24) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J721E_WKUP_IOPAD(0xc0, PIN_OUTPUT, 0) /* (G25) WKUP_GPIO0_4.MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* (F28) WKUP_GPIO0_2 */
+		>;
+	};
+
+	wkup_gpio_pins_default: wkup-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart2_pins_default>;
+};
+
+&main_uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart4_pins_default>;
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_gpio_pins_default>;
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&main_gpio1 {
+	status = "okay";
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD/MMC */
+	status = "okay";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv_alt>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&usb_serdes_mux {
+	idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default>;
+	ti,usb2-only;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};
+
+&ospi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "qspi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "qspi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "qspi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "qspi.env";
+				reg = <0x680000 0x20000>;
+			};
+
+			partition@6a0000 {
+				label = "qspi.env.backup";
+				reg = <0x6a0000 0x20000>;
+			};
+
+			partition@6c0000 {
+				label = "qspi.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@800000 {
+				label = "qspi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fe0000 {
+				label = "qspi.phypattern";
+				reg = <0x3fe0000 0x20000>;
+			};
+		};
+	};
+};
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		p09-hog {
+			/* P11 - MCASP/TRACE_MUX_S0 */
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "MCASP/TRACE_MUX_S0";
+		};
+
+		p10-hog {
+			/* P12 - MCASP/TRACE_MUX_S1 */
+			gpio-hog;
+			gpios = <10 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "MCASP/TRACE_MUX_S1";
+		};
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp4: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_i2c1_exp4_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&k3_clks {
+	/* Confiure AUDIO_EXT_REFCLK2 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audi_ext_refclk2_pins_default>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+
+		#sound-dai-cells = <1>;
+
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+
+		/* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */
+		clocks = <&k3_clks 157 371>;
+		clock-names = "scki";
+
+		/* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */
+		assigned-clocks = <&k3_clks 157 371>;
+		assigned-clock-parents = <&k3_clks 157 400>;
+		assigned-clock-rates = <24576000>; /* for 48KHz */
+
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
+};
+
+&main_i2c6 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c6_pins_default>;
+	clock-frequency = <400000>;
+
+	exp5: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	/*
+	 * These clock assignments are chosen to enable the following outputs:
+	 *
+	 * VP0 - DisplayPort SST
+	 * VP1 - DPI0
+	 * VP2 - DSI
+	 * VP3 - DPI1
+	 */
+
+	assigned-clocks = <&k3_clks 152 1>,
+			  <&k3_clks 152 4>,
+			  <&k3_clks 152 9>,
+			  <&k3_clks 152 13>;
+	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
+				 <&k3_clks 152 6>,	/* PLL19_HSDIV0 */
+				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
+				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
+};
+
+&dss_ports {
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+};
+
+&dp0_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp_connector_in>;
+		};
+	};
+};
+
+&mcasp10 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp10_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 1 1 1
+		2 2 2 0
+	>;
+	tx-num-evt = <0>;
+	rx-num-evt = <0>;
+};
+
+&cmn_refclk1 {
+	clock-frequency = <100000000>;
+};
+
+&wiz0_pll1_refclk {
+	assigned-clocks = <&wiz0_pll1_refclk>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz0_refclk_dig {
+	assigned-clocks = <&wiz0_refclk_dig>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz1_pll1_refclk {
+	assigned-clocks = <&wiz1_pll1_refclk>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz1_refclk_dig {
+	assigned-clocks = <&wiz1_refclk_dig>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz2_pll1_refclk {
+	assigned-clocks = <&wiz2_pll1_refclk>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz2_refclk_dig {
+	assigned-clocks = <&wiz2_refclk_dig>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&serdes0 {
+	assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>;
+	assigned-clock-parents = <&wiz0_pll1_refclk>;
+
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>;
+	assigned-clock-parents = <&wiz1_pll1_refclk>;
+
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&serdes2 {
+	assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>;
+	assigned-clock-parents = <&wiz2_pll1_refclk>;
+
+	serdes2_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz2 1>, <&serdes_wiz2 2>;
+	};
+};
+
+&serdes4 {
+	torrent_phy_dp: phy@0 {
+		reg = <0>;
+		resets = <&serdes_wiz4 1>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		cdns,num-lanes = <4>;
+		cdns,max-bit-rate = <5400>;
+		#phy-cells = <0>;
+	};
+};
+
+&mhdp {
+	phys = <&torrent_phy_dp>;
+	phy-names = "dpphy";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+};
+
+&pcie0_rc {
+	status = "okay";
+	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie2_rc {
+	status = "okay";
+	reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes2_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&main_mcan2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan2_pins_default>;
+	phys = <&transceiver4>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso
new file mode 100644
index 0000000000..6a7d37575d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for CPSW9G in RGMII mode using J7 GESI EXP BRD board with
+ * J721E board.
+ *
+ * GESI Board Product Link: https://www.ti.com/tool/J7EXPCXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
+		ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3";
+		ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4";
+	};
+};
+
+&cpsw0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_default_pins
+		     &rgmii2_default_pins
+		     &rgmii3_default_pins
+		     &rgmii4_default_pins>;
+};
+
+&cpsw0_port1 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy12>;
+	phy-mode = "rgmii-rxid";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 1>;
+};
+
+&cpsw0_port2 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy15>;
+	phy-mode = "rgmii-rxid";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 2>;
+};
+
+&cpsw0_port3 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy0>;
+	phy-mode = "rgmii-rxid";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 3>;
+};
+
+&cpsw0_port4 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy3>;
+	phy-mode = "rgmii-rxid";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 4>;
+};
+
+&cpsw9g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_default_pins>;
+	bus_freq = <1000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpsw9g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+	cpsw9g_phy3: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+	cpsw9g_phy12: ethernet-phy@12 {
+		reg = <12>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+	cpsw9g_phy15: ethernet-phy@15 {
+		reg = <15>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&exp1 {
+	p15-hog {
+		/* P15 - EXP_MUX2 */
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "EXP_MUX2";
+	};
+
+	p16-hog {
+		/* P16 - EXP_MUX3 */
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "EXP_MUX3";
+	};
+};
+
+&main_pmx0 {
+	mdio0_default_pins: mdio0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1bc, PIN_OUTPUT, 0) /* (V24) MDIO0_MDC */
+			J721E_IOPAD(0x1b8, PIN_INPUT, 0) /* (V26) MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_default_pins: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x4, PIN_INPUT, 4) /* (AC23) PRG1_PRU0_GPO0.RGMII1_RD0 */
+			J721E_IOPAD(0x8, PIN_INPUT, 4) /* (AG22) PRG1_PRU0_GPO1.RGMII1_RD1 */
+			J721E_IOPAD(0xc, PIN_INPUT, 4) /* (AF22) PRG1_PRU0_GPO2.RGMII1_RD2 */
+			J721E_IOPAD(0x10, PIN_INPUT, 4) /* (AJ23) PRG1_PRU0_GPO3.RGMII1_RD3 */
+			J721E_IOPAD(0x1c, PIN_INPUT, 4) /* (AD22) PRG1_PRU0_GPO6.RGMII1_RXC */
+			J721E_IOPAD(0x14, PIN_INPUT, 4) /* (AH23) PRG1_PRU0_GPO4.RGMII1_RX_CTL */
+			J721E_IOPAD(0x30, PIN_OUTPUT, 4) /* (AF24) PRG1_PRU0_GPO11.RGMII1_TD0 */
+			J721E_IOPAD(0x34, PIN_OUTPUT, 4) /* (AJ24) PRG1_PRU0_GPO12.RGMII1_TD1 */
+			J721E_IOPAD(0x38, PIN_OUTPUT, 4) /* (AG24) PRG1_PRU0_GPO13.RGMII1_TD2 */
+			J721E_IOPAD(0x3c, PIN_OUTPUT, 4) /* (AD24) PRG1_PRU0_GPO14.RGMII1_TD3 */
+			J721E_IOPAD(0x44, PIN_OUTPUT, 4) /* (AE24) PRG1_PRU0_GPO16.RGMII1_TXC */
+			J721E_IOPAD(0x40, PIN_OUTPUT, 4) /* (AC24) PRG1_PRU0_GPO15.RGMII1_TX_CTL */
+		>;
+	};
+
+	rgmii2_default_pins: rgmii2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x58, PIN_INPUT, 4) /* (AE22) PRG1_PRU1_GPO0.RGMII2_RD0 */
+			J721E_IOPAD(0x5c, PIN_INPUT, 4) /* (AG23) PRG1_PRU1_GPO1.RGMII2_RD1 */
+			J721E_IOPAD(0x60, PIN_INPUT, 4) /* (AF23) PRG1_PRU1_GPO2.RGMII2_RD2 */
+			J721E_IOPAD(0x64, PIN_INPUT, 4) /* (AD23) PRG1_PRU1_GPO3.RGMII2_RD3 */
+			J721E_IOPAD(0x70, PIN_INPUT, 4) /* (AE23) PRG1_PRU1_GPO6.RGMII2_RXC */
+			J721E_IOPAD(0x68, PIN_INPUT, 4) /* (AH24) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			J721E_IOPAD(0x84, PIN_OUTPUT, 4) /* (AJ25) PRG1_PRU1_GPO11.RGMII2_TD0 */
+			J721E_IOPAD(0x88, PIN_OUTPUT, 4) /* (AH25) PRG1_PRU1_GPO12.RGMII2_TD1 */
+			J721E_IOPAD(0x8c, PIN_OUTPUT, 4) /* (AG25) PRG1_PRU1_GPO13.RGMII2_TD2 */
+			J721E_IOPAD(0x90, PIN_OUTPUT, 4) /* (AH26) PRG1_PRU1_GPO14.RGMII2_TD3 */
+			J721E_IOPAD(0x98, PIN_OUTPUT, 4) /* (AJ26) PRG1_PRU1_GPO16.RGMII2_TXC */
+			J721E_IOPAD(0x94, PIN_OUTPUT, 4) /* (AJ27) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+
+	rgmii3_default_pins: rgmii3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xb0, PIN_INPUT, 4) /* (AF28) PRG0_PRU0_GPO0.RGMII3_RD0 */
+			J721E_IOPAD(0xb4, PIN_INPUT, 4) /* (AE28) PRG0_PRU0_GPO1.RGMII3_RD1 */
+			J721E_IOPAD(0xb8, PIN_INPUT, 4) /* (AE27) PRG0_PRU0_GPO2.RGMII3_RD2 */
+			J721E_IOPAD(0xbc, PIN_INPUT, 4) /* (AD26) PRG0_PRU0_GPO3.RGMII3_RD3 */
+			J721E_IOPAD(0xc8, PIN_INPUT, 4) /* (AE26) PRG0_PRU0_GPO6.RGMII3_RXC */
+			J721E_IOPAD(0xc0, PIN_INPUT, 4) /* (AD25) PRG0_PRU0_GPO4.RGMII3_RX_CTL */
+			J721E_IOPAD(0xdc, PIN_OUTPUT, 4) /* (AJ28) PRG0_PRU0_GPO11.RGMII3_TD0 */
+			J721E_IOPAD(0xe0, PIN_OUTPUT, 4) /* (AH27) PRG0_PRU0_GPO12.RGMII3_TD1 */
+			J721E_IOPAD(0xe4, PIN_OUTPUT, 4) /* (AH29) PRG0_PRU0_GPO13.RGMII3_TD2 */
+			J721E_IOPAD(0xe8, PIN_OUTPUT, 4) /* (AG28) PRG0_PRU0_GPO14.RGMII3_TD3 */
+			J721E_IOPAD(0xf0, PIN_OUTPUT, 4) /* (AH28) PRG0_PRU0_GPO16.RGMII3_TXC */
+			J721E_IOPAD(0xec, PIN_OUTPUT, 4) /* (AG27) PRG0_PRU0_GPO15.RGMII3_TX_CTL */
+		>;
+	};
+
+	rgmii4_default_pins: rgmii4-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x100, PIN_INPUT, 4) /* (AE29) PRG0_PRU1_GPO0.RGMII4_RD0 */
+			J721E_IOPAD(0x104, PIN_INPUT, 4) /* (AD28) PRG0_PRU1_GPO1.RGMII4_RD1 */
+			J721E_IOPAD(0x108, PIN_INPUT, 4) /* (AD27) PRG0_PRU1_GPO2.RGMII4_RD2 */
+			J721E_IOPAD(0x10c, PIN_INPUT, 4) /* (AC25) PRG0_PRU1_GPO3.RGMII4_RD3 */
+			J721E_IOPAD(0x118, PIN_INPUT, 4) /* (AC26) PRG0_PRU1_GPO6.RGMII4_RXC */
+			J721E_IOPAD(0x110, PIN_INPUT, 4) /* (AD29) PRG0_PRU1_GPO4.RGMII4_RX_CTL */
+			J721E_IOPAD(0x12c, PIN_OUTPUT, 4) /* (AG26) PRG0_PRU1_GPO11.RGMII4_TD0 */
+			J721E_IOPAD(0x130, PIN_OUTPUT, 4) /* (AF27) PRG0_PRU1_GPO12.RGMII4_TD1 */
+			J721E_IOPAD(0x134, PIN_OUTPUT, 4) /* (AF26) PRG0_PRU1_GPO13.RGMII4_TD2 */
+			J721E_IOPAD(0x138, PIN_OUTPUT, 4) /* (AE25) PRG0_PRU1_GPO14.RGMII4_TD3 */
+			J721E_IOPAD(0x140, PIN_OUTPUT, 4) /* (AG29) PRG0_PRU1_GPO16.RGMII4_TXC */
+			J721E_IOPAD(0x13c, PIN_OUTPUT, 4) /* (AF29) PRG0_PRU1_GPO15.RGMII4_TX_CTL */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso
new file mode 100644
index 0000000000..d4c51ffc3d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
+ * J721E board.
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+#include "k3-pinctrl.h"
+#include "k3-serdes.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
+		ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3";
+		ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4";
+	};
+};
+
+&cpsw0 {
+	status = "okay";
+};
+
+&cpsw0_port1 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy0>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 1>;
+};
+
+&cpsw0_port2 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy1>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 2>;
+};
+
+&cpsw0_port3 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy2>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 3>;
+};
+
+&cpsw0_port4 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy3>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 4>;
+};
+
+&cpsw9g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_pins_default>;
+	reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>;
+	reset-post-delay-us = <120000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpsw9g_phy0: ethernet-phy@17 {
+		reg = <17>;
+	};
+	cpsw9g_phy1: ethernet-phy@16 {
+		reg = <16>;
+	};
+	cpsw9g_phy2: ethernet-phy@18 {
+		reg = <18>;
+	};
+	cpsw9g_phy3: ethernet-phy@19 {
+		reg = <19>;
+	};
+};
+
+&exp2 {
+	qsgmii-line-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "qsgmii-pwrdn-line";
+	};
+};
+
+&main_pmx0 {
+	mdio0_pins_default: mdio0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1bc, PIN_OUTPUT, 0) /* (V24) MDIO0_MDC */
+			J721E_IOPAD(0x1b8, PIN_INPUT, 0) /* (V26) MDIO0_MDIO */
+		>;
+	};
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_QSGMII_LANE2>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&serdes0 {
+	status = "okay";
+
+	assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>, <&serdes0 CDNS_SIERRA_PLL_CMNLC1>;
+	assigned-clock-parents = <&wiz0_pll1_refclk>, <&wiz0_pll1_refclk>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	serdes0_qsgmii_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_QSGMII>;
+		resets = <&serdes_wiz0 2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
new file mode 100644
index 0000000000..f6c7e16145
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -0,0 +1,2741 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-ti.h>
+#include <dt-bindings/mux/mux.h>
+
+#include "k3-serdes.h"
+
+/ {
+	cmn_refclk: clock-cmnrefclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	cmn_refclk1: clock-cmnrefclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x800000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x800000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0 0x00100000 0 0x1c000>; /* excludes pinctrl region */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: mux-controller@4080 {
+			compatible = "mmio-mux";
+			reg = <0x00004080 0x50>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+					/* SERDES4 lane0/1/2/3 select */
+			idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+				      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+				      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+				      <MUX_IDLE_AS_IS>, <J721E_SERDES3_LANE1_USB3_0>,
+				      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+				      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+		};
+
+		cpsw0_phy_gmii_sel: phy@4044 {
+			compatible = "ti,j721e-cpsw9g-phy-gmii-sel";
+			ti,qsgmii-main-ports = <2>, <2>;
+			reg = <0x4044 0x20>;
+			#phy-cells = <1>;
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
+					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
+		};
+
+		ehrpwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am654-ehrpwm-tbclk";
+			reg = <0x4140 0x18>;
+			#clock-cells = <1>;
+		};
+	};
+
+	main_ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3000000 0x00 0x100>;
+		power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 83 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3010000 0x00 0x100>;
+		power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 84 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3020000 0x00 0x100>;
+		power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 85 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3030000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3040000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3050000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <131>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_navss: bus@30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <199>;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x0 0x310e0000 0x0 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <213>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: interrupt-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x0 0x33d00000 0x0 0x100000>;
+			interrupt-controller;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			#interrupt-cells = <0>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <209>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		smmu0: iommu@36600000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x36600000 0x0 0x100000>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			#iommu-cells = <1>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x3c000000 0x0 0x400000>,
+			      <0x0 0x38000000 0x0 0x400000>,
+			      <0x0 0x31120000 0x0 0x100>,
+			      <0x0 0x33000000 0x0 0x40000>,
+			      <0x0 0x31080000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x0 0x31150000 0x0 0x100>,
+			      <0x0 0x34000000 0x0 0x100000>,
+			      <0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 201 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	cpsw0: ethernet@c000000 {
+		compatible = "ti,j721e-cpswxg-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0xc000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x0c000000 0x0 0x200000>;
+		clocks = <&k3_clks 19 89>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xca00>,
+		       <&main_udmap 0xca01>,
+		       <&main_udmap 0xca02>,
+		       <&main_udmap 0xca03>,
+		       <&main_udmap 0xca04>,
+		       <&main_udmap 0xca05>,
+		       <&main_udmap 0xca06>,
+		       <&main_udmap 0xca07>,
+		       <&main_udmap 0x4a00>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cpsw0_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				status = "disabled";
+			};
+
+			cpsw0_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				status = "disabled";
+			};
+
+			cpsw0_port3: port@3 {
+				reg = <3>;
+				ti,mac-only;
+				label = "port3";
+				status = "disabled";
+			};
+
+			cpsw0_port4: port@4 {
+				reg = <4>;
+				ti,mac-only;
+				label = "port4";
+				status = "disabled";
+			};
+
+			cpsw0_port5: port@5 {
+				reg = <5>;
+				ti,mac-only;
+				label = "port5";
+				status = "disabled";
+			};
+
+			cpsw0_port6: port@6 {
+				reg = <6>;
+				ti,mac-only;
+				label = "port6";
+				status = "disabled";
+			};
+
+			cpsw0_port7: port@7 {
+				reg = <7>;
+				ti,mac-only;
+				label = "port7";
+				status = "disabled";
+			};
+
+			cpsw0_port8: port@8 {
+				reg = <8>;
+				ti,mac-only;
+				label = "port8";
+				status = "disabled";
+			};
+		};
+
+		cpsw9g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 19 89>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 19 16>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x0 0x4e00000 0x0 0x1200>;
+		power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+
+		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+				<&main_udmap 0x4001>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x0 0x4e10000 0x0 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x2b4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104200 0x00 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000007>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104280 0x00 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
+	serdes_wiz0: wiz@5000000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+		assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5000000 0x0 0x5000000 0x10000>;
+
+		wiz0_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 292 11>, <&cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 292 0>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 292 0>;
+		};
+
+		wiz0_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&cmn_refclk>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz0_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz0_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz0_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes0: serdes@5000000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			resets = <&serdes_wiz0 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>,
+				 <&wiz0_pll0_refclk>, <&wiz0_pll1_refclk>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+				      "pll0_refclk", "pll1_refclk";
+		};
+	};
+
+	serdes_wiz1: wiz@5010000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
+		assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5010000 0x0 0x5010000 0x10000>;
+
+		wiz1_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 293 13>, <&cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 293 0>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 293 0>;
+		};
+
+		wiz1_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&cmn_refclk>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz1_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz1_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz1_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes1: serdes@5010000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5010000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			resets = <&serdes_wiz1 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>,
+				 <&wiz1_pll0_refclk>, <&wiz1_pll1_refclk>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+				      "pll0_refclk", "pll1_refclk";
+		};
+	};
+
+	serdes_wiz2: wiz@5020000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
+		assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5020000 0x0 0x5020000 0x10000>;
+
+		wiz2_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 294 11>, <&cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 294 0>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 294 0>;
+		};
+
+		wiz2_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&cmn_refclk>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz2_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz2_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz2_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes2: serdes@5020000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5020000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			resets = <&serdes_wiz2 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>,
+				 <&wiz2_pll0_refclk>, <&wiz2_pll1_refclk>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+				      "pll0_refclk", "pll1_refclk";
+		};
+	};
+
+	serdes_wiz3: wiz@5030000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
+		assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5030000 0x0 0x5030000 0x10000>;
+
+		wiz3_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 295 9>, <&cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 295 0>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 295 0>;
+		};
+
+		wiz3_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&cmn_refclk>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz3_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz3_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz3_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes3: serdes@5030000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5030000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			resets = <&serdes_wiz3 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>,
+				 <&wiz3_pll0_refclk>, <&wiz3_pll1_refclk>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+				      "pll0_refclk", "pll1_refclk";
+		};
+	};
+
+	pcie0_rc: pcie@2900000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 239 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000 0x0 0x18001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000 0x0 0x18011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie2_rc: pcie@2920000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02920000 0x00 0x1000>,
+		      <0x00 0x02927000 0x00 0x400>,
+		      <0x00 0x0e000000 0x00 0x00800000>,
+		      <0x44 0x00000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 241 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x20000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie3_rc: pcie@2930000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02930000 0x00 0x1000>,
+		      <0x00 0x02937000 0x00 0x400>,
+		      <0x00 0x0e800000 0x00 0x00800000>,
+		      <0x44 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 242 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x30000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	serdes_wiz4: wiz@5050000 {
+		compatible = "ti,am64-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 297 1>, <&k3_clks 297 9>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 297 9>;
+		assigned-clock-parents = <&k3_clks 297 10>;
+		assigned-clock-rates = <19200000>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x05050000 0x00 0x05050000 0x010000>,
+			<0x0a030a00 0x00 0x0a030a00 0x40>;
+
+		serdes4: serdes@5050000 {
+			/*
+			 * Note: we also map DPTX PHY registers as the Torrent
+			 * needs to manage those.
+			 */
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05050000 0x010000>,
+			      <0x0a030a00 0x40>; /* DPTX PHY */
+			reg-names = "torrent_phy", "dptx_phy";
+
+			resets = <&serdes_wiz4 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>;
+			clock-names = "refclk";
+			assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 297 9>,
+						 <&k3_clks 297 9>,
+						 <&k3_clks 297 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 49 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 49 1>;
+		assigned-clock-parents = <&k3_clks 49 2>;
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 50 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 50 1>, <&k3_clks 327 0>;
+		assigned-clock-parents = <&k3_clks 50 2>, <&k3_clks 327 1>;
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 51 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 51 1>;
+		assigned-clock-parents = <&k3_clks 51 2>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 52 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 52 1>, <&k3_clks 328 0>;
+		assigned-clock-parents = <&k3_clks 52 2>, <&k3_clks 328 1>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 53 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 53 1>;
+		assigned-clock-parents = <&k3_clks 53 2>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 54 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 54 1>, <&k3_clks 329 0>;
+		assigned-clock-parents = <&k3_clks 54 2>, <&k3_clks 329 1>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 55 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 55 1>;
+		assigned-clock-parents = <&k3_clks 55 2>;
+		power-domains = <&k3_pds 55 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 57 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 57 1>, <&k3_clks 330 0>;
+		assigned-clock-parents = <&k3_clks 57 2>, <&k3_clks 330 1>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 58 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 58 1>;
+		assigned-clock-parents = <&k3_clks 58 2>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 59 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 59 1>, <&k3_clks 331 0>;
+		assigned-clock-parents = <&k3_clks 59 2>, <&k3_clks 331 1>;
+		power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 60 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 60 1>;
+		assigned-clock-parents = <&k3_clks 60 2>;
+		power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 62 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 62 1>, <&k3_clks 332 0>;
+		assigned-clock-parents = <&k3_clks 62 2>, <&k3_clks 332 1>;
+		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer12: timer@24c0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24c0000 0x00 0x400>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 63 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 63 1>;
+		assigned-clock-parents = <&k3_clks 63 2>;
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer13: timer@24d0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24d0000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 64 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 64 1>, <&k3_clks 333 0>;
+		assigned-clock-parents = <&k3_clks 64 2>, <&k3_clks 333 1>;
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer14: timer@24e0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24e0000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 65 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 65 1>;
+		assigned-clock-parents = <&k3_clks 65 2>;
+		power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer15: timer@24f0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24f0000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 66 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 66 1>, <&k3_clks 334 0>;
+		assigned-clock-parents = <&k3_clks 66 2>, <&k3_clks 334 1>;
+		power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer16: timer@2500000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2500000 0x00 0x400>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 67 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 67 1>;
+		assigned-clock-parents = <&k3_clks 67 2>;
+		power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer17: timer@2510000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2510000 0x00 0x400>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 68 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 68 1>, <&k3_clks 335 0>;
+		assigned-clock-parents = <&k3_clks 68 2>, <&k3_clks 335 1>;
+		power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer18: timer@2520000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2520000 0x00 0x400>;
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 69 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 69 1>;
+		assigned-clock-parents = <&k3_clks 69 2>;
+		power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer19: timer@2530000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2530000 0x00 0x400>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 70 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 70 1>, <&k3_clks 336 0>;
+		assigned-clock-parents = <&k3_clks 70 2>, <&k3_clks 336 1>;
+		power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 281 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 282 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 283 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 284 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 285 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 286 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <256>, <257>, <258>, <259>,
+			     <260>, <261>, <262>, <263>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <288>, <289>, <290>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00610000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <264>, <265>, <266>, <267>,
+			     <268>, <269>, <270>, <271>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio3: gpio@611000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00611000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <292>, <293>, <294>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 108 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00620000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <272>, <273>, <274>, <275>,
+			     <276>, <277>, <278>, <279>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 109 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio5: gpio@621000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00621000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <296>, <297>, <298>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 110 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00630000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <280>, <281>, <282>, <283>,
+			     <284>, <285>, <286>, <287>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio7: gpio@631000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00631000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <300>, <301>, <302>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 112 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 91 0>, <&k3_clks 91 1>;
+		assigned-clocks = <&k3_clks 91 1>;
+		assigned-clock-parents = <&k3_clks 91 2>;
+		bus-width = <8>;
+		mmc-hs200-1_8v;
+		mmc-ddr-1_8v;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x6>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 92 5>, <&k3_clks 92 0>;
+		assigned-clocks = <&k3_clks 92 0>;
+		assigned-clock-parents = <&k3_clks 92 1>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
+		ti,trm-icp = <0x8>;
+		ti,clkbuf-sel = <0x7>;
+		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
+		status = "disabled";
+	};
+
+	main_sdhci2: mmc@4f98000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 93 5>, <&k3_clks 93 0>;
+		assigned-clocks = <&k3_clks 93 0>;
+		assigned-clock-parents = <&k3_clks 93 1>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
+		ti,trm-icp = <0x8>;
+		ti,clkbuf-sel = <0x7>;
+		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
+		status = "disabled";
+	};
+
+	usbss0: cdns-usb@4104000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4104000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 288 15>;	/* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb0: usb@6000000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6000000 0x00 0x10000>,
+			      <0x00 0x6010000 0x00 0x10000>,
+			      <0x00 0x6020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	usbss1: cdns-usb@4114000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4114000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 289 15>, <&k3_clks 289 3>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 289 15>;	/* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 289 16>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb1: usb@6400000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6400000 0x00 0x10000>,
+			      <0x00 0x6410000 0x00 0x10000>,
+			      <0x00 0x6420000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 0>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 0>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 0>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 0>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2040000 0x0 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 0>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2050000 0x0 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 0>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2060000 0x0 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 0>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	ufs_wrapper: ufs-wrapper@4e80000 {
+		compatible = "ti,j721e-ufs";
+		reg = <0x0 0x4e80000 0x0 0x100>;
+		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 277 1>;
+		assigned-clocks = <&k3_clks 277 1>;
+		assigned-clock-parents = <&k3_clks 277 4>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ufs@4e84000 {
+			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+			reg = <0x0 0x4e84000 0x0 0x10000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+			clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
+			clock-names = "core_clk", "phy_clk", "ref_clk";
+			dma-coherent;
+		};
+	};
+
+	mhdp: dp-bridge@a000000 {
+		compatible = "ti,j721e-mhdp8546";
+		/*
+		 * Note: we do not map DPTX PHY area, as that is handled by
+		 * the PHY driver.
+		 */
+		reg = <0x00 0x0a000000 0x00 0x030a00>, /* DSS_EDP0_V2A_CORE_VP_REGS_APB */
+		      <0x00 0x04f40000 0x00 0x20>;    /* DSS_EDP0_INTG_CFG_VP */
+		reg-names = "mhdptx", "j721e-intg";
+
+		clocks = <&k3_clks 151 36>;
+
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+
+		dp0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+			    reg = <0>;
+			};
+
+			port@4 {
+			    reg = <4>;
+			};
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,j721e-dss";
+		reg =
+			<0x00 0x04a00000 0x00 0x10000>, /* common_m */
+			<0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
+			<0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
+			<0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
+
+			<0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
+			<0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
+			<0x00 0x04a50000 0x00 0x10000>, /* vid1 */
+			<0x00 0x04a60000 0x00 0x10000>, /* vid2 */
+
+			<0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
+			<0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
+			<0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
+			<0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
+
+			<0x00 0x04a80000 0x00 0x10000>, /* vp1 */
+			<0x00 0x04aa0000 0x00 0x10000>, /* vp2 */
+			<0x00 0x04ac0000 0x00 0x10000>, /* vp3 */
+			<0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
+			<0x00 0x04af0000 0x00 0x10000>; /* wb */
+
+		reg-names = "common_m", "common_s0",
+			"common_s1", "common_s2",
+			"vidl1", "vidl2","vid1","vid2",
+			"ovr1", "ovr2", "ovr3", "ovr4",
+			"vp1", "vp2", "vp3", "vp4",
+			"wb";
+
+		clocks = <&k3_clks 152 0>,
+			 <&k3_clks 152 1>,
+			 <&k3_clks 152 4>,
+			 <&k3_clks 152 9>,
+			 <&k3_clks 152 13>;
+		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+
+		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "common_m",
+				  "common_s0",
+				  "common_s1",
+				  "common_s2";
+
+		dss_ports: ports {
+		};
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 174 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 175 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 176 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp3: mcasp@2b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b30000 0x0 0x2000>,
+			<0x0 0x02b38000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 177 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp4: mcasp@2b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b40000 0x0 0x2000>,
+			<0x0 0x02b48000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 178 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp5: mcasp@2b50000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b50000 0x0 0x2000>,
+			<0x0 0x02b58000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 179 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp6: mcasp@2b60000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b60000 0x0 0x2000>,
+			<0x0 0x02b68000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 180 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp7: mcasp@2b70000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b70000 0x0 0x2000>,
+			<0x0 0x02b78000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 181 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp8: mcasp@2b80000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b80000 0x0 0x2000>,
+			<0x0 0x02b88000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 182 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp9: mcasp@2b90000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b90000 0x0 0x2000>,
+			<0x0 0x02b98000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 183 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp10: mcasp@2ba0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02ba0000 0x0 0x2000>,
+			<0x0 0x02ba8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 184 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp11: mcasp@2bb0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02bb0000 0x0 0x2000>,
+			<0x0 0x02bb8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 185 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	watchdog0: watchdog@2200000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2200000 0x0 0x100>;
+		clocks = <&k3_clks 252 1>;
+		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 252 1>;
+		assigned-clock-parents = <&k3_clks 252 5>;
+	};
+
+	watchdog1: watchdog@2210000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		clocks = <&k3_clks 253 1>;
+		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 253 1>;
+		assigned-clock-parents = <&k3_clks 253 5>;
+	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j721e-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5c00000 0x00008000>,
+			      <0x5c10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "j7-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5d00000 0x00008000>,
+			      <0x5d10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <246>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 246 1>;
+			firmware-name = "j7-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@5e00000 {
+		compatible = "ti,j721e-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
+			 <0x5f00000 0x00 0x5f00000 0x20000>;
+		power-domains = <&k3_pds 244 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@5e00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5e00000 0x00008000>,
+			      <0x5e10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <247>;
+			ti,sci-proc-ids = <0x08 0xff>;
+			resets = <&k3_reset 247 1>;
+			firmware-name = "j7-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@5f00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5f00000 0x00008000>,
+			      <0x5f10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <248>;
+			ti,sci-proc-ids = <0x09 0xff>;
+			resets = <&k3_reset 248 1>;
+			firmware-name = "j7-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	c66_0: dsp@4d80800000 {
+		compatible = "ti,j721e-c66-dsp";
+		reg = <0x4d 0x80800000 0x00 0x00048000>,
+		      <0x4d 0x80e00000 0x00 0x00008000>,
+		      <0x4d 0x80f00000 0x00 0x00008000>;
+		reg-names = "l2sram", "l1pram", "l1dram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <142>;
+		ti,sci-proc-ids = <0x03 0xff>;
+		resets = <&k3_reset 142 1>;
+		firmware-name = "j7-c66_0-fw";
+		status = "disabled";
+	};
+
+	c66_1: dsp@4d81800000 {
+		compatible = "ti,j721e-c66-dsp";
+		reg = <0x4d 0x81800000 0x00 0x00048000>,
+		      <0x4d 0x81e00000 0x00 0x00008000>,
+		      <0x4d 0x81f00000 0x00 0x00008000>;
+		reg-names = "l2sram", "l1pram", "l1dram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <143>;
+		ti,sci-proc-ids = <0x04 0xff>;
+		resets = <&k3_reset 143 1>;
+		firmware-name = "j7-c66_1-fw";
+		status = "disabled";
+	};
+
+	c71_0: dsp@64800000 {
+		compatible = "ti,j721e-c71-dsp";
+		reg = <0x00 0x64800000 0x00 0x00080000>,
+		      <0x00 0x64e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <15>;
+		ti,sci-proc-ids = <0x30 0xff>;
+		resets = <&k3_reset 15 1>;
+		firmware-name = "j7-c71_0-fw";
+		status = "disabled";
+	};
+
+	icssg0: icssg@b000000 {
+		compatible = "ti,j721e-icssg";
+		reg = <0x00 0xb000000 0x00 0x80000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x0b000000 0x100000>;
+
+		icssg0_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg0_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg0_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 119 24>, /* icssg0_core_clk */
+						 <&k3_clks 119 1>;  /* icssg0_iclk */
+					assigned-clocks = <&icssg0_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 119 1>;
+				};
+
+				icssg0_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 119 3>,	/* icssg0_iep_clk */
+						 <&icssg0_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg0_iepclk_mux>;
+					assigned-clock-parents = <&icssg0_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg0_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg0_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg0_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru0_0: pru@34000 {
+			compatible = "ti,j721e-pru";
+			reg = <0x34000 0x3000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-pru0_0-fw";
+		};
+
+		rtu0_0: rtu@4000 {
+			compatible = "ti,j721e-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-rtu0_0-fw";
+		};
+
+		tx_pru0_0: txpru@a000 {
+			compatible = "ti,j721e-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-txpru0_0-fw";
+		};
+
+		pru0_1: pru@38000 {
+			compatible = "ti,j721e-pru";
+			reg = <0x38000 0x3000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-pru0_1-fw";
+		};
+
+		rtu0_1: rtu@6000 {
+			compatible = "ti,j721e-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-rtu0_1-fw";
+		};
+
+		tx_pru0_1: txpru@c000 {
+			compatible = "ti,j721e-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-txpru0_1-fw";
+		};
+
+		icssg0_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 119 1>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	icssg1: icssg@b100000 {
+		compatible = "ti,j721e-icssg";
+		reg = <0x00 0xb100000 0x00 0x80000>;
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x0b100000 0x100000>;
+
+		icssg1_mem: memories@b100000 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg1_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg1_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 120 54>, /* icssg1_core_clk */
+						 <&k3_clks 120 4>;  /* icssg1_iclk */
+					assigned-clocks = <&icssg1_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 120 4>;
+				};
+
+				icssg1_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 120 9>,	/* icssg1_iep_clk */
+						 <&icssg1_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg1_iepclk_mux>;
+					assigned-clock-parents = <&icssg1_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg1_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg1_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg1_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru1_0: pru@34000 {
+			compatible = "ti,j721e-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-pru1_0-fw";
+		};
+
+		rtu1_0: rtu@4000 {
+			compatible = "ti,j721e-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-rtu1_0-fw";
+		};
+
+		tx_pru1_0: txpru@a000 {
+			compatible = "ti,j721e-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-txpru1_0-fw";
+		};
+
+		pru1_1: pru@38000 {
+			compatible = "ti,j721e-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-pru1_1-fw";
+		};
+
+		rtu1_1: rtu@6000 {
+			compatible = "ti,j721e-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-rtu1_1-fw";
+		};
+
+		tx_pru1_1: txpru@c000 {
+			compatible = "ti,j721e-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-txpru1_1-fw";
+		};
+
+		icssg1_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 120 4>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>, <&k3_clks 156 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>, <&k3_clks 158 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 160 0>, <&k3_clks 160 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 161 0>, <&k3_clks 161 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 162 0>, <&k3_clks 162 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 163 0>, <&k3_clks 163 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 164 0>, <&k3_clks 164 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 165 0>, <&k3_clks 165 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 166 0>, <&k3_clks 166 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 167 0>, <&k3_clks 167 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 168 0>, <&k3_clks 168 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 169 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 169 0>, <&k3_clks 169 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 170 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 170 0>, <&k3_clks 170 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 171 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 171 0>, <&k3_clks 171 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 266 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 267 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 268 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 269 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 270 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 271 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 272 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 273 1>;
+		status = "disabled";
+	};
+
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x0 0x700000 0x0 0x1000>;
+		ti,esm-pins = <344>, <345>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
new file mode 100644
index 0000000000..05d6ef127b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: system-controller@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x0 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x0 0x43000014 0x0 0x4>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x178>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04200 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04280 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x0 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 35 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 35 1>;
+		assigned-clock-parents = <&k3_clks 35 2>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 71 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 71 1>, <&k3_clks 322 0>;
+		assigned-clock-parents = <&k3_clks 71 2>, <&k3_clks 322 1>;
+		power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 72 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 72 1>;
+		assigned-clock-parents = <&k3_clks 72 2>;
+		power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 73 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 73 1>, <&k3_clks 323 0>;
+		assigned-clock-parents = <&k3_clks 73 2>, <&k3_clks 323 1>;
+		power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer4: timer@40440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40440000 0x00 0x400>;
+		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 74 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 74 1>;
+		assigned-clock-parents = <&k3_clks 74 2>;
+		power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer5: timer@40450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40450000 0x00 0x400>;
+		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 75 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 75 1>, <&k3_clks 324 0>;
+		assigned-clock-parents = <&k3_clks 75 2>, <&k3_clks 324 1>;
+		power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer6: timer@40460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40460000 0x00 0x400>;
+		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 76 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 76 1>;
+		assigned-clock-parents = <&k3_clks 76 2>;
+		power-domains = <&k3_pds 76 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer7: timer@40470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40470000 0x00 0x400>;
+		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 77 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 77 1>, <&k3_clks 325 0>;
+		assigned-clock-parents = <&k3_clks 77 2>, <&k3_clks 325 1>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer8: timer@40480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40480000 0x00 0x400>;
+		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 78 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 78 1>;
+		assigned-clock-parents = <&k3_clks 78 2>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer9: timer@40490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40490000 0x00 0x400>;
+		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 79 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 79 1>, <&k3_clks 326 0>;
+		assigned-clock-parents = <&k3_clks 79 2>, <&k3_clks 326 1>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 287 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	wkup_gpio_intr: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <137>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x42110000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <84>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x42100000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <84>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 0>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b10000 0x0 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 0>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x42120000 0x0 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 0>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+		status = "disabled";
+	};
+
+	fss: bus@47000000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x47000000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: mux-controller@47000004 {
+			compatible = "reg-mux";
+			reg = <0x00 0x47000004 0x00 0x2>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+		};
+
+		hbmc: hyperbus@47034000 {
+			compatible = "ti,am654-hbmc";
+			reg = <0x00 0x47034000 0x00 0x100>,
+				<0x05 0x00000000 0x01 0x0000000>;
+			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+			clocks = <&k3_clks 102 0>;
+			assigned-clocks = <&k3_clks 102 5>;
+			assigned-clock-rates = <333333333>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			mux-controls = <&hbmc_mux 0>;
+			status = "disabled";
+		};
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 103 0>;
+			assigned-clocks = <&k3_clks 103 0>;
+			assigned-clock-parents = <&k3_clks 103 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 104 0>;
+			power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 1>;
+		assigned-clocks = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 1>;
+		assigned-clocks = <&k3_clks 1 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x2b800000 0x0 0x400000>,
+			      <0x0 0x2b000000 0x0 0x400000>,
+			      <0x0 0x28590000 0x0 0x100>,
+			      <0x0 0x2a500000 0x0 0x40000>,
+			      <0x0 0x28440000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg = <0x0 0x285c0000 0x0 0x100>,
+			      <0x0 0x2a800000 0x0 0x40000>,
+			      <0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x0 0x2a480000 0x0 0x80000>,
+		      <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 18 22>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 18 22>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 18 2>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,j721e-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x41000000 0x00008000>,
+			      <0x41010000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <250>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 250 1>;
+			firmware-name = "j7-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <251>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 251 1>;
+			firmware-name = "j7-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	mcu_mcan0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40528000 0x00 0x200>,
+		      <0x00 0x40500000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 172 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 172 0>, <&k3_clks 172 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40568000 0x00 0x200>,
+		      <0x00 0x40540000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 173 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 173 0>, <&k3_clks 173 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 274 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 275 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 0>;
+		status = "disabled";
+	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j721e-vtm";
+		reg = <0x00 0x42040000 0x00 0x350>,
+		      <0x00 0x42050000 0x00 0x350>,
+		      <0x00 0x43000300 0x00 0x10>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
new file mode 100644
index 0000000000..42fe8eee9e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -0,0 +1,1074 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,j721e-sk", "ti,j721e";
+	model = "Texas Instruments J721E SK";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		ethernet0 = &cpsw_port1;
+		mmc1 = &main_sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@aa000000 {
+			reg = <0x00 0xaa000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	vusb_main: fixedregulator-vusb-main5v0 {
+		/* USB MAIN INPUT 5V DC */
+		compatible = "regulator-fixed";
+		regulator-name = "vusb-main5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LM5141 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_mmc1_en_pins_default>;
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&wkup_gpio0 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv_alt: gpio-regulator-tps659411 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
+		regulator-name = "tps659411";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+		gpios = <&wkup_gpio0 9 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	dp_pwr_3v3: fixedregulator-dp-prw {
+		compatible = "regulator-fixed";
+		regulator-name = "dp-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_pwr_en_pins_default>;
+		gpio = <&main_gpio0 111 0>;	/* DP0_3V3 _EN */
+		enable-active-high;
+	};
+
+	dp0: connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp_pwr_3v3>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins_default>;
+
+		ddc-i2c-bus = <&main_i2c1>;
+
+		/* HDMI_HPD */
+		hpd-gpios = <&main_gpio1 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-bridge {
+		compatible = "ti,tfp410";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_pdn_pins_default>;
+
+		powerdown-gpios = <&main_gpio0 127 GPIO_ACTIVE_LOW>;
+		ti,deskew = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+					pclk-sample = <1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint =
+						<&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */
+			J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */
+			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
+			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */
+			J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
+		>;
+	};
+
+	main_usbss1_pins_default: main-usbss1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
+		>;
+	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
+		>;
+	};
+
+	dp_pwr_en_pins_default: dp-pwr-en-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */
+		>;
+	};
+
+	dss_vout0_pins_default: dss-vout0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */
+			J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */
+			J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */
+			J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */
+			J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */
+			J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */
+			J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */
+			J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */
+			J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */
+			J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */
+			J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */
+			J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */
+			J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */
+			J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */
+			J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */
+			J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */
+			J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */
+			J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */
+			J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */
+			J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */
+			J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */
+			J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */
+			J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */
+			J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */
+			J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */
+			J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */
+			J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */
+			J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */
+		>;
+	};
+
+	hdmi_hpd_pins_default: hdmi-hpd-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */
+		>;
+	};
+
+	hdmi_pdn_pins_default: hdmi-pdn-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
+		>;
+	};
+
+	/* Reset for M.2 E Key slot on PCIe0  */
+	ekey_reset_pins_default: ekey-reset-pns-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */
+		>;
+	};
+
+	main_i2c5_pins_default: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */
+			J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */
+			J721E_IOPAD(0x14C, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+			J721E_IOPAD(0x02C, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */
+			J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1B0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+			J721E_IOPAD(0x1A0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+			J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */
+			J721E_IOPAD(0x1D0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */
+			J721E_IOPAD(0x11C, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */
+			J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */
+			J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */
+			J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */
+			J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */
+			J721E_IOPAD(0x19C, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1B4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x00C, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */
+			J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */
+			J721E_IOPAD(0x178, PIN_INPUT, 7) /* (U27) RGMII5_RD3.GPIO0_93 */
+			J721E_IOPAD(0x17C, PIN_INPUT, 7) /* (U24) RGMII5_RD2.GPIO0_94 */
+			J721E_IOPAD(0x190, PIN_INPUT, 7) /* (W23) RGMII6_TD3.GPIO0_99 */
+			J721E_IOPAD(0x18C, PIN_INPUT, 7) /* (V23) RGMII6_RX_CTL.GPIO0_98 */
+		>;
+	};
+
+	rpi_header_gpio1_pins_default: rpi-header-gpio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */
+			J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */
+			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 0) /* (D20) MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 0) /* (G20) MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 0) /* (F21) MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 0) /* (E21) MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */
+		>;
+	};
+
+	vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */
+		>;
+	};
+
+	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 2) /* (D26) MCU_I3C0_SCL.MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	/* Reset for M.2 M Key slot on PCIe1  */
+	mkey_reset_pins_default: mkey-reset-pns-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		/* AT24C512C-MAHM-T */
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_sdhci1 {
+	/* SD Card */
+	status = "okay";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv_alt>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@7c0000 {
+				label = "ospi.env.backup";
+				reg = <0x7c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* PCIe1 M.2 M Key I2C */
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		/* PCIe0 M.2 E Key I2C */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	/* i2c1 is used for DVI DDC, so we need to use 100kHz */
+	clock-frequency = <100000>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		/* CSI0 I2C */
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		/* CSI1 I2C */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&main_i2c5 {
+	/* Brought out on RPi Header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
+};
+
+&main_gpio1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio1_pins_default>;
+};
+
+&wkup_gpio0 {
+	status = "okay";
+};
+
+&usb_serdes_mux {
+	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_IP4_UNUSED>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
+&serdes4 {
+	torrent_phy_dp: phy@0 {
+		reg = <0>;
+		resets = <&serdes_wiz4 1>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		cdns,num-lanes = <4>;
+		cdns,max-bit-rate = <5400>;
+		#phy-cells = <0>;
+	};
+};
+
+&mhdp {
+	phys = <&torrent_phy_dp>;
+	phy-names = "dpphy";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&serdes2 {
+	serdes2_usb_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz2 2>;
+	};
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes2_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout0_pins_default>;
+
+	assigned-clocks = <&k3_clks 152 1>,	/* VP 1 pixel clock */
+			  <&k3_clks 152 4>,	/* VP 2 pixel clock */
+			  <&k3_clks 152 9>,	/* VP 3 pixel clock */
+			  <&k3_clks 152 13>;	/* VP 4 pixel clock */
+	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
+				 <&k3_clks 152 6>,	/* DPI0_EXT_CLKSEL_OUT0 */
+				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
+				 <&k3_clks 152 18>;	/* DPI1_EXT_CLKSEL_OUT0 */
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0  {
+		reg = <0>;
+
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+		};
+	};
+};
+
+&dp0_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp_connector_in>;
+		};
+	};
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&pcie0_rc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ekey_reset_pins_default>;
+	reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>;
+
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mkey_reset_pins_default>;
+	reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>;
+
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&ufs_wrapper {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
new file mode 100644
index 0000000000..7f0686c2ce
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2020 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Product Link: https://www.ti.com/tool/J721EXSOMXEVM
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@aa000000 {
+			reg = <0x00 0xaa000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+		>;
+	};
+
+	mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1)  /* MCU_HYPERBUS0_CK */
+			J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1)  /* MCU_HYPERBUS0_CKn */
+			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CSn0 */
+			J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* MCU_HYPERBUS0_CSn1 */
+			J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_RESETn */
+			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1)   /* MCU_HYPERBUS0_RWDS */
+			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1)   /* MCU_HYPERBUS0_DQ0 */
+			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ1 */
+			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ2 */
+			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ3 */
+			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ4 */
+			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ5 */
+			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ6 */
+			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ7 */
+		>;
+	};
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* CAV24C256WE-GT3 */
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x20000>;
+			};
+
+			partition@6a0000 {
+				label = "ospi.env.backup";
+				reg = <0x6a0000 0x20000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fe0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fe0000 0x20000>;
+			};
+		};
+	};
+};
+
+&hbmc {
+	/* OSPI and HBMC are muxed inside FSS, Bootloader will enable
+	 * appropriate node based on board detection
+	 */
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
+	ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
+		 <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
+
+	flash@0,0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0x00 0x00 0x4000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "hbmc.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "hbmc.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "hbmc.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "hbmc.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "hbmc.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@800000 {
+				label = "hbmc.rootfs";
+				reg = <0x800000 0x3800000>;
+			};
+		};
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
new file mode 100644
index 0000000000..c252327900
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	wkup_thermal: wkup-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			wkup_crit: wkup-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	mpu_thermal: mpu-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			mpu_crit: mpu-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	c7x_thermal: c7x-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			c7x_crit: c7x-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	gpu_thermal: gpu-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 3>;
+
+		trips {
+			gpu_crit: gpu-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	r5f_thermal: r5f-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 4>;
+
+		trips {
+			r5f_crit: r5f-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
new file mode 100644
index 0000000000..a200810df5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 J721E SoC";
+	compatible = "ti,j721e";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
+			 <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x0c000000 0x00 0x0c000000 0x00 0x0d000000>, /* CPSW9G */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01800000>, /* PCIe Core*/
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
+			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
+			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+			 <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+		};
+	};
+
+	#include "k3-j721e-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j721e-main.dtsi"
+#include "k3-j721e-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
new file mode 100644
index 0000000000..c6b85bbf9a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Common Processor Board: https://www.ti.com/tool/J721EXCPXEVM
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2-som-p0.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,j721s2-evm", "ti,j721s2";
+	model = "Texas Instruments J721S2 EVM";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		can0 = &main_mcan16;
+		can1 = &mcu_mcan0;
+		can2 = &mcu_mcan1;
+		can3 = &main_mcan3;
+		can4 = &main_mcan5;
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	transceiver1: can-phy1 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy2 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver3: can-phy3 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+		mux-states = <&mux0 1>;
+	};
+
+	transceiver4: can-phy4 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+		mux-states = <&mux1 1>;
+	};
+};
+
+&main_pmx0 {
+	main_uart8_pins_default: main-uart8-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x040, PIN_INPUT, 14) /* (AC28) MCASP0_AXR0.UART8_CTSn */
+			J721S2_IOPAD(0x044, PIN_OUTPUT, 14) /* (Y26) MCASP0_AXR1.UART8_RTSn */
+			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
+			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x064, PIN_INPUT_PULLUP, 13) /* (W28) MCAN0_TX.I2C3_SCL */
+			J721S2_IOPAD(0x060, PIN_INPUT_PULLUP, 13) /* (AC27) MCASP2_AXR1.I2C3_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
+			J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
+			J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
+			J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
+			J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
+			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
+			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */
+		>;
+	};
+
+	main_mcan3_pins_default: main-mcan3-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x080, PIN_INPUT, 0) /* (U26) MCASP0_AXR4.MCAN3_RX */
+			J721S2_IOPAD(0x07c, PIN_OUTPUT, 0) /* (T27) MCASP0_AXR3.MCAN3_TX */
+		>;
+	};
+
+	main_mcan5_pins_default: main-mcan5-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x03c, PIN_INPUT, 0) /* (U27) MCASP0_AFSX.MCAN5_RX */
+			J721S2_IOPAD(0x038, PIN_OUTPUT, 0) /* (AB28) MCASP0_ACLKX.MCAN5_TX */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */
+			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */
+			J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
+			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
+			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */
+			J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /*(C23) WKUP_GPIO0_4.MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (D26) WKUP_GPIO0_0 */
+			J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (B25) MCU_SPI0_D1.WKUP_GPIO0_69 */
+		>;
+	};
+
+	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */
+		>;
+	};
+
+	mcu_adc0_pins_default: mcu-adc0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */
+			J721S2_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */
+			J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */
+			J721S2_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */
+			J721S2_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */
+			J721S2_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */
+			J721S2_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */
+			J721S2_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */
+			J721S2_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */
+			J721S2_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */
+			J721S2_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */
+			J721S2_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */
+			J721S2_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */
+			J721S2_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */
+			J721S2_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */
+		>;
+	};
+};
+
+&wkup_pmx1 {
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
+			J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
+			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
+			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
+		>;
+	};
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&wkup_gpio0 {
+	status = "okay";
+};
+
+&wkup_uart0 {
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart8 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+	/* Shared with TFA on this platform */
+	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
+};
+
+&main_i2c0 {
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PCIE_2L_MODE_SEL", "PCIE_2L_PERSTZ", "PCIE_2L_RC_RSTZ",
+				  "PCIE_2L_EP_RST_EN", "PCIE_1L_MODE_SEL", "PCIE_1L_PERSTZ",
+				  "PCIE_1L_RC_RSTZ", "PCIE_1L_EP_RST_EN", "PCIE_2L_PRSNT#",
+				  "PCIE_1L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", "EXP_MUX1",
+				  "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTz";
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "APPLE_AUTH_RSTZ", "MLB_RSTZ", "GPIO_USD_PWR_EN", "USBC_PWR_EN",
+				  "USBC_MODE_SEL1", "USBC_MODE_SEL0", "MCAN0_EN", "MCAN0_STB#",
+				  "MUX_SPAREMUX_SPARE", "MCASP/TRACE_MUX_S0", "MCASP/TRACE_MUX_S1",
+				  "MLB_MUX_SEL", "MCAN_MUX_SEL", "MCASP2/SPI3_MUX_SEL", "PCIe_CLKREQn_MUX_SEL",
+				  "CDCI2_RSTZ", "ENET_EXP_PWRDN", "ENET_EXP_RESETZ", "ENET_I2CMUX_SEL",
+				  "ENET_EXP_SPARE2", "M2PCIE_RTSZ", "USER_INPUT1", "USER_LED1", "USER_LED2";
+	};
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>,
+		      <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>;
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	status = "okay";
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&usb_serdes_mux {
+	idle-states = <1>; /* USB0 to SERDES lane 1 */
+};
+
+&usbss0 {
+	status = "okay";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	pinctrl-names = "default";
+	ti,vbus-divider;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&ospi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&tscadc0 {
+	pinctrl-0 = <&mcu_adc0_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	pinctrl-0 = <&mcu_adc1_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&main_mcan3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan3_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&main_mcan5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan5_pins_default>;
+	phys = <&transceiver4>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso
new file mode 100644
index 0000000000..b78feea31b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for MAIN CPSW2G using GESI Expansion Board with J7 common processor board.
+ *
+ * GESI Board Product Link: https://www.ti.com/tool/J7EXPCXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c200000/ethernet-ports/port@1";
+	};
+};
+
+&main_pmx0 {
+	main_cpsw_mdio_default_pins: main-cpsw-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c0, PIN_OUTPUT, 6) /* (T28) MCASP1_AXR0.MDIO0_MDC */
+			J721S2_IOPAD(0x0bc, PIN_INPUT, 6) /* (V28) MCASP1_AFSX.MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_default_pins: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0b8, PIN_INPUT, 6) /* (AA24) MCASP1_ACLKX.RGMII1_RD0 */
+			J721S2_IOPAD(0x0a0, PIN_INPUT, 6) /* (AB25) MCASP0_AXR12.RGMII1_RD1 */
+			J721S2_IOPAD(0x0a4, PIN_INPUT, 6) /* (T23) MCASP0_AXR13.RGMII1_RD2 */
+			J721S2_IOPAD(0x0a8, PIN_INPUT, 6) /* (U24) MCASP0_AXR14.RGMII1_RD3 */
+			J721S2_IOPAD(0x0b0, PIN_INPUT, 6) /* (AD26) MCASP1_AXR3.RGMII1_RXC */
+			J721S2_IOPAD(0x0ac, PIN_INPUT, 6) /* (AC25) MCASP0_AXR15.RGMII1_RX_CTL */
+			J721S2_IOPAD(0x08c, PIN_OUTPUT, 6) /* (T25) MCASP0_AXR7.RGMII1_TD0 */
+			J721S2_IOPAD(0x090, PIN_OUTPUT, 6) /* (W24) MCASP0_AXR8.RGMII1_TD1 */
+			J721S2_IOPAD(0x094, PIN_OUTPUT, 6) /* (AA25) MCASP0_AXR9.RGMII1_TD2 */
+			J721S2_IOPAD(0x098, PIN_OUTPUT, 6) /* (V25) MCASP0_AXR10.RGMII1_TD3 */
+			J721S2_IOPAD(0x0b4, PIN_OUTPUT, 6) /* (U25) MCASP1_AXR4.RGMII1_TXC */
+			J721S2_IOPAD(0x09c, PIN_OUTPUT, 6) /* (T24) MCASP0_AXR11.RGMII1_TX_CTL */
+		>;
+	};
+};
+
+&exp1 {
+	p15 {
+		/* P15 - EXP_MUX2 */
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "EXP_MUX2";
+	};
+};
+
+&main_cpsw {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_default_pins>;
+};
+
+&main_cpsw_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw_mdio_default_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	main_cpsw_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&main_cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&main_cpsw_phy0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
new file mode 100644
index 0000000000..084f8f5b66
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -0,0 +1,1698 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721S2 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+	serdes_refclk: clock-cmnrefclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x400000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x400000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+
+		tifs-sram@1f0000 {
+			reg = <0x1f0000 0x10000>;
+		};
+
+		l3cache-sram@200000 {
+			reg = <0x200000 0x200000>;
+		};
+	};
+
+	scm_conf: syscon@104000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x00104000 0x00 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00104000 0x18000>;
+
+		usb_serdes_mux: mux-controller@0 {
+			compatible = "mmio-mux";
+			reg = <0x0 0x4>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+		};
+
+		phy_gmii_sel_cpsw: phy@34 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x34 0x4>;
+			#phy-cells = <1>;
+		};
+
+		serdes_ln_ctrl: mux-controller@80 {
+			compatible = "mmio-mux";
+			reg = <0x80 0x10>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
+					<0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
+		};
+
+		ehrpwm_tbclk: clock-controller@140 {
+			compatible = "ti,am654-ehrpwm-tbclk";
+			reg = <0x140 0x18>;
+			#clock-cells = <1>;
+		};
+	};
+
+	main_ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3000000 0x00 0x100>;
+		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 160 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3010000 0x00 0x100>;
+		power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 161 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3020000 0x00 0x100>;
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 162 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3030000 0x00 0x100>;
+		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 163 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3040000 0x00 0x100>;
+		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 164 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3050000 0x00 0x100>;
+		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 165 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x100000>, /* GICD */
+		      <0x00 0x01900000 0x00 0x100000>, /* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,   /* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,   /* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;   /* GICV */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <148>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104200 0x00 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000007>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104280 0x00 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x04e00000 0x00 0x1200>;
+		power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>;
+
+		dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>,
+		       <&main_udmap 0x4a41>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x04e10000 0x00 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 63 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 63 1>;
+		assigned-clock-parents = <&k3_clks 63 2>;
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 64 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 64 1>;
+		assigned-clock-parents = <&k3_clks 64 2>;
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 65 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 65 1>;
+		assigned-clock-parents = <&k3_clks 65 2>;
+		power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 66 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 66 1>;
+		assigned-clock-parents = <&k3_clks 66 2>;
+		power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 67 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 67 1>;
+		assigned-clock-parents = <&k3_clks 67 2>;
+		power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 68 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 68 1>;
+		assigned-clock-parents = <&k3_clks 68 2>;
+		power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 69 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 69 1>;
+		assigned-clock-parents = <&k3_clks 69 2>;
+		power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 70 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 70 1>;
+		assigned-clock-parents = <&k3_clks 70 2>;
+		power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 71 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 71 1>;
+		assigned-clock-parents = <&k3_clks 71 2>;
+		power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 72 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 72 1>;
+		assigned-clock-parents = <&k3_clks 72 2>;
+		power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 73 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 73 1>;
+		assigned-clock-parents = <&k3_clks 73 2>;
+		power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 74 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 74 1>;
+		assigned-clock-parents = <&k3_clks 74 2>;
+		power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer12: timer@24c0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24c0000 0x00 0x400>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 75 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 75 1>;
+		assigned-clock-parents = <&k3_clks 75 2>;
+		power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer13: timer@24d0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24d0000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 76 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 76 1>;
+		assigned-clock-parents = <&k3_clks 76 2>;
+		power-domains = <&k3_pds 76 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer14: timer@24e0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24e0000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 77 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 77 1>;
+		assigned-clock-parents = <&k3_clks 77 2>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer15: timer@24f0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24f0000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 78 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 78 1>;
+		assigned-clock-parents = <&k3_clks 78 2>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer16: timer@2500000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2500000 0x00 0x400>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 79 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 79 1>;
+		assigned-clock-parents = <&k3_clks 79 2>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer17: timer@2510000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2510000 0x00 0x400>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 80 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 80 1>;
+		assigned-clock-parents = <&k3_clks 80 2>;
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer18: timer@2520000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2520000 0x00 0x400>;
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 81 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 81 1>;
+		assigned-clock-parents = <&k3_clks 81 2>;
+		power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer19: timer@2530000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2530000 0x00 0x400>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 82 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 82 1>;
+		assigned-clock-parents = <&k3_clks 82 2>;
+		power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x200>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 146 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x200>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 350 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x200>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 351 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x200>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 352 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x200>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 353 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x200>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 354 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x200>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 355 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x200>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 356 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x200>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 357 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x200>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 358 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>, <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>, <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 112 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>, <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>, <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02000000 0x00 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 214 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 214 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02010000 0x00 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 215 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 215 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02020000 0x00 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 216 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 216 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02030000 0x00 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 217 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02040000 0x00 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 218 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02050000 0x00 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 219 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02060000 0x00 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 220 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x00 0x04f80000 0x00 0x1000>,
+		      <0x00 0x04f88000 0x00 0x400>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 7>, <&k3_clks 98 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 98 1>;
+		assigned-clock-parents = <&k3_clks 98 2>;
+		bus-width = <8>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,strobe-sel = <0x77>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x00 0x04fb0000 0x00 0x1000>,
+		      <0x00 0x04fb8000 0x00 0x400>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 99 8>, <&k3_clks 99 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 99 1>;
+		assigned-clock-parents = <&k3_clks 99 2>;
+		bus-width = <4>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		/* Masking support for SDR104 capability */
+		sdhci-caps-mask = <0x00000003 0x00000000>;
+		status = "disabled";
+	};
+
+	main_navss: bus@30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <224>;
+		dma-coherent;
+		dma-ranges;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x00 0x310e0000 0x00 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <227>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <265>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster0: mailbox@31f90000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f90000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster1: mailbox@31f91000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f91000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster2: mailbox@31f92000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f92000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster3: mailbox@31f93000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f93000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster4: mailbox@31f94000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f94000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster5: mailbox@31f95000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f95000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster6: mailbox@31f96000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f96000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster7: mailbox@31f97000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f97000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster8: mailbox@31f98000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f98000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster9: mailbox@31f99000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f99000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster10: mailbox@31f9a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster11: mailbox@31f9b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x3c000000 0x0 0x400000>,
+			      <0x0 0x38000000 0x0 0x400000>,
+			      <0x0 0x31120000 0x0 0x100>,
+			      <0x0 0x33000000 0x0 0x40000>,
+			      <0x0 0x31080000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <259>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x0 0x31150000 0x0 0x100>,
+			      <0x0 0x34000000 0x0 0x80000>,
+			      <0x0 0x35000000 0x0 0x200000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <263>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 226 5>;
+			clock-names = "cpts";
+			assigned-clocks = <&k3_clks 226 5>; /* NAVSS0_CPTS_0_RCLK */
+			assigned-clock-parents = <&k3_clks 226 7>; /* MAIN_0_HSDIVOUT6_CLK */
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	main_cpsw: ethernet@c200000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		reg = <0x00 0xc200000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0xc200000 0x0 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+		clocks = <&k3_clks 28 28>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xc640>,
+		       <&main_udmap 0xc641>,
+		       <&main_udmap 0xc642>,
+		       <&main_udmap 0xc643>,
+		       <&main_udmap 0xc644>,
+		       <&main_udmap 0xc645>,
+		       <&main_udmap 0xc646>,
+		       <&main_udmap 0xc647>,
+		       <&main_udmap 0x4640>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			main_cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel_cpsw 1>;
+				status = "disabled";
+			};
+		};
+
+		main_cpsw_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 28 28>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 28 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	usbss0: cdns-usb@4104000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x04104000 0x00 0x100>;
+		clocks = <&k3_clks 360 16>, <&k3_clks 360 15>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 360 17>;
+		power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+
+		status = "disabled"; /* Needs pinmux */
+
+		usb0: usb@6000000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x06000000 0x00 0x10000>,
+			      <0x00 0x06010000 0x00 0x10000>,
+			      <0x00 0x06020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host", "peripheral", "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	serdes_wiz0: wiz@5060000 {
+		compatible = "ti,j721s2-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 365 0>, <&k3_clks 365 3>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+		assigned-clocks = <&k3_clks 365 3>;
+		assigned-clock-parents = <&k3_clks 365 7>;
+
+		serdes0: serdes@5060000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05060000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 365 3>,
+						 <&k3_clks 365 3>,
+						 <&k3_clks 365 3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			status = "disabled"; /* Needs lane config */
+		};
+	};
+
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x800000>,
+		      <0x00 0x18000000 0x00 0x1000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb013>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie1_intc 0>, /* INT A */
+				<0 0 0 2 &pcie1_intc 0>, /* INT B */
+				<0 0 0 3 &pcie1_intc 0>, /* INT C */
+				<0 0 0 4 &pcie1_intc 0>; /* INT D */
+
+		status = "disabled"; /* Needs gpio and serdes info */
+
+		pcie1_intc: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 182 0>, <&k3_clks 182 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 183 0>, <&k3_clks 183 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 184 0>, <&k3_clks 184 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 185 0>, <&k3_clks 185 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 186 0>, <&k3_clks 186 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 187 0>, <&k3_clks 187 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 188 0>, <&k3_clks 188 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 189 0>, <&k3_clks 189 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 190 0>, <&k3_clks 190 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 191 0>, <&k3_clks 191 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 192 0>, <&k3_clks 192 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 193 0>, <&k3_clks 193 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 194 0>, <&k3_clks 194 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 195 0>, <&k3_clks 195 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan14: can@2681000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02681000 0x00 0x200>,
+		      <0x00 0x02688000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 197 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 197 0>, <&k3_clks 197 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan15: can@2691000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02691000 0x00 0x200>,
+		      <0x00 0x02698000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 199 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 199 0>, <&k3_clks 199 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan16: can@26a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026a1000 0x00 0x200>,
+		      <0x00 0x026a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 201 0>, <&k3_clks 201 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan17: can@26b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026b1000 0x00 0x200>,
+		      <0x00 0x026b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 206 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 206 0>, <&k3_clks 206 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 339 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 339 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 340 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 340 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 341 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 341 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 342 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 342 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 343 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 343 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 344 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 344 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 345 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 346 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 346 1>;
+		status = "disabled";
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,j721e-dss";
+		reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
+		      <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
+		      <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
+		      <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
+		      <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
+		      <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
+		      <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
+		      <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
+		      <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
+		      <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
+		      <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
+		      <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
+		      <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04aa0000 0x00 0x10000>, /* vp2 */
+		      <0x00 0x04ac0000 0x00 0x10000>, /* vp3 */
+		      <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
+		      <0x00 0x04af0000 0x00 0x10000>; /* wb */
+		reg-names = "common_m", "common_s0",
+			    "common_s1", "common_s2",
+			    "vidl1", "vidl2","vid1","vid2",
+			    "ovr1", "ovr2", "ovr3", "ovr4",
+			    "vp1", "vp2", "vp3", "vp4",
+			    "wb";
+		clocks = <&k3_clks 158 0>,
+			 <&k3_clks 158 2>,
+			 <&k3_clks 158 5>,
+			 <&k3_clks 158 14>,
+			 <&k3_clks 158 18>;
+		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "common_m",
+				  "common_s0",
+				  "common_s1",
+				  "common_s2";
+		status = "disabled";
+
+		dss_ports: ports {
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
new file mode 100644
index 0000000000..2ddad93185
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721S2 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	sms: system-controller@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x00 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x00 0x43000014 0x00 0x4>;
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x00 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x034>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx1: pinctrl@4301c038 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c038 0x00 0x02C>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx2: pinctrl@4301c068 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c068 0x00 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx3: pinctrl@4301c190 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c190 0x00 0x004>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04200 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04280 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	wkup_gpio_intr: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <125>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+
+	};
+
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 35 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 35 1>;
+		assigned-clock-parents = <&k3_clks 35 2>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 83 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 83 1>;
+		assigned-clock-parents = <&k3_clks 83 2>;
+		power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 84 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 84 1>;
+		assigned-clock-parents = <&k3_clks 84 2>;
+		power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 85 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 85 1>;
+		assigned-clock-parents = <&k3_clks 85 2>;
+		power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer4: timer@40440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40440000 0x00 0x400>;
+		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 86 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 86 1>;
+		assigned-clock-parents = <&k3_clks 86 2>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer5: timer@40450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40450000 0x00 0x400>;
+		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 87 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 87 1>;
+		assigned-clock-parents = <&k3_clks 87 2>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer6: timer@40460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40460000 0x00 0x400>;
+		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 88 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 88 1>;
+		assigned-clock-parents = <&k3_clks 88 2>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer7: timer@40470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40470000 0x00 0x400>;
+		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 89 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 89 1>;
+		assigned-clock-parents = <&k3_clks 89 2>;
+		power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer8: timer@40480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40480000 0x00 0x400>;
+		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 90 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 90 1>;
+		assigned-clock-parents = <&k3_clks 90 2>;
+		power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer9: timer@40490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40490000 0x00 0x400>;
+		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 91 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 91 1>;
+		assigned-clock-parents = <&k3_clks 91 2>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x200>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 359 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x200>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 149 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42110000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 115 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42100000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 116 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x42120000 0x00 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 223 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b00000 0x00 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 221 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b10000 0x00 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 222 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_mcan0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40528000 0x00 0x200>,
+		      <0x00 0x40500000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 207 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 207 0>, <&k3_clks 207 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40568000 0x00 0x200>,
+		      <0x00 0x40540000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 208 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 208 0>, <&k3_clks 208 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 347 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 348 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 349 0>;
+		status = "disabled";
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <267>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x2b800000 0x0 0x400000>,
+			      <0x0 0x2b000000 0x0 0x400000>,
+			      <0x0 0x28590000 0x0 0x100>,
+			      <0x0 0x2a500000 0x0 0x40000>,
+			      <0x0 0x28440000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <272>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg = <0x0 0x285c0000 0x0 0x100>,
+			      <0x0 0x2a800000 0x0 0x40000>,
+			      <0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <273>;
+			ti,ringacc = <&mcu_ringacc>;
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x2a480000 0x00 0x80000>,
+		      <0x00 0x2a380000 0x00 0x80000>,
+		      <0x00 0x2a400000 0x00 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 29 28>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 29 28>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 29 3>;
+			clock-names = "cpts";
+			assigned-clocks = <&k3_clks 29 3>; /* CPTS_RFT_CLK */
+			assigned-clock-parents = <&k3_clks 29 5>; /* MAIN_0_HSDIVOUT6_CLK */
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40200000 0x00 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40210000 0x00 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	fss: bus@47000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47040000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 109 5>;
+			assigned-clocks = <&k3_clks 109 5>;
+			assigned-clock-parents = <&k3_clks 109 7>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled"; /* Needs pinmux */
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47050000 0x00 0x100>,
+			      <0x07 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 110 5>;
+			power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled"; /* Needs pinmux */
+		};
+	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0x42040000 0x0 0x350>,
+		      <0x00 0x42050000 0x0 0x350>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
new file mode 100644
index 0000000000..a4006f3280
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SoM: https://www.ti.com/lit/zip/sprr439
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 16 GB RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x03 0x80000000>;
+	};
+
+	/* Reserving memory regions still pending */
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	mux0: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	mux1: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver0: can-phy0 {
+		/* standby pin has been grounded by default */
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+};
+
+&wkup_pmx0 {
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
+			J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */
+			J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */
+			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */
+			J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */
+		>;
+	};
+
+	main_mcan16_pins_default: main-mcan16-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */
+			J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */
+		>;
+	};
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* CAV24C256WE-GT3 */
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp_som: gpio@21 {
+		compatible = "ti,tca6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
+				  "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
+				  "GPIO_RGMII1_RST", "GPIO_eDP_ENABLE",
+				   "GPIO_LIN_EN", "CAN_STB";
+	};
+};
+
+&main_mcan16 {
+	status = "okay";
+	pinctrl-0 = <&main_mcan16_pins_default>;
+	pinctrl-names = "default";
+	phys = <&transceiver0>;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi
new file mode 100644
index 0000000000..f7b1a15b8f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+wkup0_thermal: wkup0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		wkup0_crit: wkup0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+wkup1_thermal: wkup1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		wkup1_crit: wkup1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main0_thermal: main0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		main0_crit: main0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main1_thermal: main1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 3>;
+
+	trips {
+		main1_crit: main1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main2_thermal: main2-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 4>;
+
+	trips {
+		main2_crit: main2-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main3_thermal: main3-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 5>;
+
+	trips {
+		main3_crit: main3-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main4_thermal: main4-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 6>;
+
+	trips {
+		main4_crit: main4-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
new file mode 100644
index 0000000000..1f636acd4e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721S2 SoC Family
+ *
+ * TRM (SPRUJ28 NOVEMBER 2021): https://www.ti.com/lit/pdf/spruj28
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+
+	model = "Texas Instruments K3 J721S2 SoC";
+	compatible = "ti,j721s2";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe Core*/
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
+			 <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+
+		};
+
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-j721s2-thermal.dtsi"
+	};
+};
+
+/* Now include peripherals from each bus segment */
+#include "k3-j721s2-main.dtsi"
+#include "k3-j721s2-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
new file mode 100644
index 0000000000..5991c2e1d9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-j784s4.dtsi"
+
+/ {
+	compatible = "ti,j784s4-evm", "ti,j784s4";
+	model = "Texas Instruments J784S4 EVM";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c3 = &main_i2c0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 32G RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x07 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_1_dma_memory_region: c71-dma-memory@a9000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_1_memory_region: c71-memory@a9100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_2_dma_memory_region: c71-dma-memory@aa000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_2_memory_region: c71-memory@aa100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_3_dma_memory_region: c71-dma-memory@ab000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_3_memory_region: c71-memory@ab100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab100000 0x00 0xf00000>;
+			no-map;
+		};
+	};
+
+	evm_12v0: regulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-vsys3v3 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-TLV71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+};
+
+&main_pmx0 {
+	bootph-all;
+	main_uart8_pins_default: main-uart8-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */
+			J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */
+			J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
+			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
+			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
+			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
+			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
+			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
+			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
+			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
+			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
+			J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	bootph-all;
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
+			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
+			J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
+			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
+			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
+			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_adc0_pins_default: mcu-adc0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
+			J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
+			J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
+			J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
+			J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
+			J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
+			J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
+			J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
+			J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
+			J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
+			J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
+			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
+			J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
+			J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
+			J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	bootph-all;
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
+			J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
+			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
+		>;
+	};
+};
+
+&wkup_pmx1 {
+	bootph-all;
+	mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */
+		>;
+	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */
+			J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */
+			J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */
+			J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Firmware usage */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&wkup_i2c0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* CAV24C256WE-GT3 */
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&mcu_uart0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart8 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+};
+
+&ufs_wrapper {
+	status = "okay";
+};
+
+&fss {
+	bootph-all;
+	status = "okay";
+};
+
+&ospi0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;
+
+	flash@0 {
+		bootph-all;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				bootph-all;
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&ospi1 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0 {
+		bootph-all;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "qspi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "qspi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "qspi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "qspi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "qspi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "qspi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				bootph-all;
+				label = "qspi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ",
+				  "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ",
+				  "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#",
+				  "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3",
+				  "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ";
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN",
+				  "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0",
+				  "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#",
+				  "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ",
+				  "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1",
+				  "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ",
+				  "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ",
+				  "USER_INPUT1", "USER_LED1", "USER_LED2";
+	};
+};
+
+&main_sdhci0 {
+	bootph-all;
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	bootph-all;
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&mcu_cpsw {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	mcu_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mcu_cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&mcu_phy0>;
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster5 {
+	status = "okay";
+	interrupts = <416>;
+
+	mbox_c71_2: mbox-c71-2 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_3: mbox-c71-3 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&main_r5fss2_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
+	memory-region = <&main_r5fss2_core0_dma_memory_region>,
+			<&main_r5fss2_core0_memory_region>;
+};
+
+&main_r5fss2_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
+	memory-region = <&main_r5fss2_core1_dma_memory_region>,
+			<&main_r5fss2_core1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
+
+&c71_2 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
+	memory-region = <&c71_2_dma_memory_region>,
+			<&c71_2_memory_region>;
+};
+
+&c71_3 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
+	memory-region = <&c71_3_dma_memory_region>,
+			<&c71_3_memory_region>;
+};
+
+&tscadc0 {
+	pinctrl-0 = <&mcu_adc0_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	pinctrl-0 = <&mcu_adc1_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
new file mode 100644
index 0000000000..efed2d683f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -0,0 +1,1571 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J784S4 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x800000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x70000000 0x800000>;
+
+		atf-sram@0 {
+			reg = <0x00 0x20000>;
+		};
+
+		tifs-sram@1f0000 {
+			reg = <0x1f0000 0x10000>;
+		};
+
+		l3cache-sram@200000 {
+			reg = <0x200000 0x200000>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
+		      <0x00 0x01900000 0x00 0x100000>, /* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,   /* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,   /* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;   /* GICV */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <10>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c000 0x00 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104200 0x00 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000007>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104280 0x00 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x4e00000 0x00 0x1200>;
+		power-domains = <&k3_pds 369 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>;
+
+		dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>,
+				<&main_udmap 0x4a41>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x4e10000 0x00 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 97 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 97 2>;
+		assigned-clock-parents = <&k3_clks 97 3>;
+		power-domains = <&k3_pds 97 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 98 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 98 2>;
+		assigned-clock-parents = <&k3_clks 98 3>;
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 99 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 99 2>;
+		assigned-clock-parents = <&k3_clks 99 3>;
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 100 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 100 2>;
+		assigned-clock-parents = <&k3_clks 100 3>;
+		power-domains = <&k3_pds 100 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 101 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 101 2>;
+		assigned-clock-parents = <&k3_clks 101 3>;
+		power-domains = <&k3_pds 101 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 102 2>;
+		assigned-clock-parents = <&k3_clks 102 3>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 103 2>;
+		assigned-clock-parents = <&k3_clks 103 3>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 104 2>;
+		assigned-clock-parents = <&k3_clks 104 3>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 105 2>;
+		assigned-clock-parents = <&k3_clks 105 3>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 106 2>;
+		assigned-clock-parents = <&k3_clks 106 3>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 107 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 107 2>;
+		assigned-clock-parents = <&k3_clks 107 3>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 108 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 108 2>;
+		assigned-clock-parents = <&k3_clks 108 3>;
+		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer12: timer@24c0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24c0000 0x00 0x400>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 109 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 109 2>;
+		assigned-clock-parents = <&k3_clks 109 3>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer13: timer@24d0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24d0000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 110 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 110 2>;
+		assigned-clock-parents = <&k3_clks 110 3>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer14: timer@24e0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24e0000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 111 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 111 2>;
+		assigned-clock-parents = <&k3_clks 111 3>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer15: timer@24f0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24f0000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 112 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 112 2>;
+		assigned-clock-parents = <&k3_clks 112 3>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer16: timer@2500000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2500000 0x00 0x400>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 113 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 113 2>;
+		assigned-clock-parents = <&k3_clks 113 3>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer17: timer@2510000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2510000 0x00 0x400>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 114 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 114 2>;
+		assigned-clock-parents = <&k3_clks 114 3>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer18: timer@2520000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2520000 0x00 0x400>;
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 115 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 115 2>;
+		assigned-clock-parents = <&k3_clks 115 3>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer19: timer@2530000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2530000 0x00 0x400>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 116 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 116 2>;
+		assigned-clock-parents = <&k3_clks 116 3>;
+		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x200>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x200>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 388 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 388 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x200>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 389 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 389 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x200>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 390 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 390 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x200>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 391 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 391 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x200>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 392 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 392 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x200>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 393 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 393 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x200>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 394 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 394 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x200>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 395 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 395 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x200>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 396 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 396 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>, <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 163 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>, <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 164 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>, <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 165 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>, <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 166 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02000000 0x00 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 270 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02010000 0x00 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 271 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02020000 0x00 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 272 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02030000 0x00 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 273 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02040000 0x00 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 274 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02050000 0x00 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 275 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02060000 0x00 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 276 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x00 0x04f80000 0x00 0x1000>,
+		      <0x00 0x04f88000 0x00 0x400>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 140 1>, <&k3_clks 140 2>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 140 2>;
+		assigned-clock-parents = <&k3_clks 140 3>;
+		bus-width = <8>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,strobe-sel = <0x77>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x00 0x04fb0000 0x00 0x1000>,
+		      <0x00 0x04fb8000 0x00 0x400>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 3>, <&k3_clks 141 4>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 141 4>;
+		assigned-clock-parents = <&k3_clks 141 5>;
+		bus-width = <4>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		sdhci-caps-mask = <0x00000003 0x00000000>;
+		no-1-8-v;
+		status = "disabled";
+	};
+
+	main_navss: bus@30000000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <280>;
+		dma-coherent;
+		dma-ranges;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x00 0x310e0000 0x00 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <283>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <321>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			bootph-all;
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: hwlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster0: mailbox@31f90000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f90000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster1: mailbox@31f91000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f91000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster2: mailbox@31f92000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f92000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster3: mailbox@31f93000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f93000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster4: mailbox@31f94000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f94000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster5: mailbox@31f95000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f95000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster6: mailbox@31f96000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f96000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster7: mailbox@31f97000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f97000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster8: mailbox@31f98000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f98000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster9: mailbox@31f99000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f99000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster10: mailbox@31f9a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster11: mailbox@31f9b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x00 0x3c000000 0x00 0x400000>,
+			      <0x00 0x38000000 0x00 0x400000>,
+			      <0x00 0x31120000 0x00 0x100>,
+			      <0x00 0x33000000 0x00 0x40000>,
+			      <0x00 0x31080000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <315>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x00 0x31150000 0x00 0x100>,
+			      <0x00 0x34000000 0x00 0x80000>,
+			      <0x00 0x35000000 0x00 0x200000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <319>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x310d0000 0x00 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 282 0>;
+			clock-names = "cpts";
+			assigned-clocks = <&k3_clks 62 3>; /* CPTS_RFT_CLK */
+			assigned-clock-parents = <&k3_clks 62 5>; /* MAIN_0_HSDIV6_CLK */
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 245 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 245 6>, <&k3_clks 245 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 246 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 246 6>, <&k3_clks 246 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 247 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 247 6>, <&k3_clks 247 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 248 6>, <&k3_clks 248 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 249 6>, <&k3_clks 249 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 250 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 250 6>, <&k3_clks 250 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 251 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 251 6>, <&k3_clks 251 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 252 6>, <&k3_clks 252 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 253 6>, <&k3_clks 253 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 254 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 254 6>, <&k3_clks 254 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 255 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 255 6>, <&k3_clks 255 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 256 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 256 6>, <&k3_clks 256 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 257 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 257 6>, <&k3_clks 257 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 258 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 258 6>, <&k3_clks 258 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan14: can@2681000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02681000 0x00 0x200>,
+		      <0x00 0x02688000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 259 6>, <&k3_clks 259 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan15: can@2691000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02691000 0x00 0x200>,
+		      <0x00 0x02698000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 260 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 260 6>, <&k3_clks 260 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan16: can@26a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026a1000 0x00 0x200>,
+		      <0x00 0x026a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 261 6>, <&k3_clks 261 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan17: can@26b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026b1000 0x00 0x200>,
+		      <0x00 0x026b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 262 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 262 6>, <&k3_clks 262 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 376 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 376 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 377 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 377 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 378 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 378 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 379 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 379 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 380 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 380 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 381 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 381 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 382 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 382 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 383 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 383 1>;
+		status = "disabled";
+	};
+
+	ufs_wrapper: ufs-wrapper@4e80000 {
+		compatible = "ti,j721e-ufs";
+		reg = <0x00 0x4e80000 0x00 0x100>;
+		power-domains = <&k3_pds 387 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 387 3>;
+		assigned-clocks = <&k3_clks 387 3>;
+		assigned-clock-parents = <&k3_clks 387 6>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		ufs@4e84000 {
+			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+			reg = <0x00 0x4e84000 0x00 0x10000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			freq-table-hz = <250000000 250000000>, <19200000 19200000>,
+					<19200000 19200000>;
+			clocks = <&k3_clks 387 1>, <&k3_clks 387 3>, <&k3_clks 387 3>;
+			clock-names = "core_clk", "phy_clk", "ref_clk";
+			dma-coherent;
+		};
+	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5c00000 0x00010000>,
+			      <0x5c10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <339>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 339 1>;
+			firmware-name = "j784s4-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5d00000 0x00010000>,
+			      <0x5d10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <340>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 340 1>;
+			firmware-name = "j784s4-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@5e00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
+			 <0x5f00000 0x00 0x5f00000 0x20000>;
+		power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@5e00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5e00000 0x00010000>,
+			      <0x5e10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <341>;
+			ti,sci-proc-ids = <0x08 0xff>;
+			resets = <&k3_reset 341 1>;
+			firmware-name = "j784s4-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@5f00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5f00000 0x00010000>,
+			      <0x5f10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <342>;
+			ti,sci-proc-ids = <0x09 0xff>;
+			resets = <&k3_reset 342 1>;
+			firmware-name = "j784s4-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss2: r5fss@5900000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5900000 0x00 0x5900000 0x20000>,
+			 <0x5a00000 0x00 0x5a00000 0x20000>;
+		power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss2_core0: r5f@5900000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5900000 0x00010000>,
+			      <0x5910000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <343>;
+			ti,sci-proc-ids = <0x0a 0xff>;
+			resets = <&k3_reset 343 1>;
+			firmware-name = "j784s4-main-r5f2_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss2_core1: r5f@5a00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5a00000 0x00010000>,
+			      <0x5a10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <344>;
+			ti,sci-proc-ids = <0x0b 0xff>;
+			resets = <&k3_reset 344 1>;
+			firmware-name = "j784s4-main-r5f2_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	c71_0: dsp@64800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x64800000 0x00 0x00080000>,
+		      <0x00 0x64e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <30>;
+		ti,sci-proc-ids = <0x30 0xff>;
+		resets = <&k3_reset 30 1>;
+		firmware-name = "j784s4-c71_0-fw";
+		status = "disabled";
+	};
+
+	c71_1: dsp@65800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x65800000 0x00 0x00080000>,
+		      <0x00 0x65e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <33>;
+		ti,sci-proc-ids = <0x31 0xff>;
+		resets = <&k3_reset 33 1>;
+		firmware-name = "j784s4-c71_1-fw";
+		status = "disabled";
+	};
+
+	c71_2: dsp@66800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x66800000 0x00 0x00080000>,
+		      <0x00 0x66e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <37>;
+		ti,sci-proc-ids = <0x32 0xff>;
+		resets = <&k3_reset 37 1>;
+		firmware-name = "j784s4-c71_2-fw";
+		status = "disabled";
+	};
+
+	c71_3: dsp@67800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x67800000 0x00 0x00080000>,
+		      <0x00 0x67e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <40>;
+		ti,sci-proc-ids = <0x33 0xff>;
+		resets = <&k3_reset 40 1>;
+		firmware-name = "j784s4-c71_3-fw";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
new file mode 100644
index 0000000000..4ab4018d36
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -0,0 +1,703 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J784S4 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	sms: system-controller@44083000 {
+		bootph-all;
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x00 0x1000>;
+
+		k3_pds: power-controller {
+			bootph-all;
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			bootph-all;
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			bootph-all;
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid@43000014 {
+		bootph-all;
+		compatible = "ti,am654-chipid";
+		reg = <0x00 0x43000014 0x00 0x4>;
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x00 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x034>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx1: pinctrl@4301c038 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c038 0x00 0x02c>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx2: pinctrl@4301c068 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c068 0x00 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx3: pinctrl@4301c190 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c190 0x00 0x004>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_gpio_intr: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <177>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04200 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04280 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x40f00000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 35 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 35 2>;
+		assigned-clock-parents = <&k3_clks 35 3>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		bootph-all;
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 117 2>;
+		assigned-clock-parents = <&k3_clks 117 3>;
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 118 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 118 2>;
+		assigned-clock-parents = <&k3_clks 118 3>;
+		power-domains = <&k3_pds 118 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 119 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 119 2>;
+		assigned-clock-parents = <&k3_clks 119 3>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer4: timer@40440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40440000 0x00 0x400>;
+		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 120 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 120 2>;
+		assigned-clock-parents = <&k3_clks 120 3>;
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer5: timer@40450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40450000 0x00 0x400>;
+		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 121 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 121 2>;
+		assigned-clock-parents = <&k3_clks 121 3>;
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer6: timer@40460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40460000 0x00 0x400>;
+		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 122 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 122 2>;
+		assigned-clock-parents = <&k3_clks 122 3>;
+		power-domains = <&k3_pds 122 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer7: timer@40470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40470000 0x00 0x400>;
+		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 123 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 123 2>;
+		assigned-clock-parents = <&k3_clks 123 3>;
+		power-domains = <&k3_pds 123 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer8: timer@40480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40480000 0x00 0x400>;
+		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 124 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 124 2>;
+		assigned-clock-parents = <&k3_clks 124 3>;
+		power-domains = <&k3_pds 124 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer9: timer@40490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40490000 0x00 0x400>;
+		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 125 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 125 2>;
+		assigned-clock-parents = <&k3_clks 125 3>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x200>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 397 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x200>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42110000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 167 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42100000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 168 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x42120000 0x00 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 279 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b00000 0x00 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 277 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b10000 0x00 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 278 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_mcan0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40528000 0x00 0x200>,
+		      <0x00 0x40500000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 263 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 263 6>, <&k3_clks 263 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40568000 0x00 0x200>,
+		      <0x00 0x40540000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 264 6>, <&k3_clks 264 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 384 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 384 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 385 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 385 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 386 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 386 0>;
+		status = "disabled";
+	};
+
+	mcu_navss: bus@28380000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		ti,sci-dev-id = <323>;
+		dma-coherent;
+		dma-ranges;
+
+		mcu_ringacc: ringacc@2b800000 {
+			bootph-all;
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x00 0x2b800000 0x00 0x400000>,
+			      <0x00 0x2b000000 0x00 0x400000>,
+			      <0x00 0x28590000 0x00 0x100>,
+			      <0x00 0x2a500000 0x00 0x40000>,
+			      <0x00 0x28440000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <328>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			bootph-all;
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg = <0x00 0x285c0000 0x00 0x100>,
+			      <0x00 0x2a800000 0x00 0x40000>,
+			      <0x00 0x2aa00000 0x00 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <329>;
+			ti,ringacc = <&mcu_ringacc>;
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x2a480000 0x00 0x80000>,
+		      <0x00 0x2a380000 0x00 0x80000>,
+		      <0x00 0x2a400000 0x00 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0x46000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 63 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcu_cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 63 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 63 3>;
+			clock-names = "cpts";
+			assigned-clocks = <&k3_clks 63 3>; /* CPTS_RFT_CLK */
+			assigned-clock-parents = <&k3_clks 63 5>; /* MAIN_0_HSDIV6_CLK */
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x41000000 0x00010000>,
+			      <0x41010000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <346>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 346 1>;
+			firmware-name = "j784s4-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x41400000 0x00010000>,
+			      <0x41410000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <347>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 347 1>;
+			firmware-name = "j784s4-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0x42040000 0x00 0x350>,
+		      <0x00 0x42050000 0x00 0x350>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40200000 0x00 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40210000 0x00 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	fss: bus@47000000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x47000000 0x00 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47040000 0x00 0x100>,
+			      <0x05 0x0000000 0x01 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 161 7>;
+			assigned-clocks = <&k3_clks 161 7>;
+			assigned-clock-parents = <&k3_clks 161 9>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47050000 0x00 0x100>,
+			      <0x07 0x0000000 0x01 0x0000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 162 7>;
+			power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi
new file mode 100644
index 0000000000..f7b1a15b8f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+wkup0_thermal: wkup0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		wkup0_crit: wkup0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+wkup1_thermal: wkup1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		wkup1_crit: wkup1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main0_thermal: main0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		main0_crit: main0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main1_thermal: main1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 3>;
+
+	trips {
+		main1_crit: main1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main2_thermal: main2-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 4>;
+
+	trips {
+		main2_crit: main2-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main3_thermal: main3-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 5>;
+
+	trips {
+		main3_crit: main3-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main4_thermal: main4-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 6>;
+
+	trips {
+		main4_crit: main4-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
new file mode 100644
index 0000000000..4398c3a463
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J784S4 SoC Family
+ *
+ * TRM (SPRUJ43 JULY 2022): https://www.ti.com/lit/zip/spruj52
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 J784S4 SoC";
+	compatible = "ti,j784s4";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1: cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a72";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a72";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_1>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x200000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	L2_1: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x200000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
+			 <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */
+			 <0x00 0x66800000 0x00 0x66800000 0x00 0x0070c000>, /* C71_3 */
+			 <0x00 0x67800000 0x00 0x67800000 0x00 0x0070c000>, /* C71_4 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			bootph-all;
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-j784s4-thermal.dtsi"
+	};
+};
+
+/* Now include peripherals from each bus segment */
+#include "k3-j784s4-main.dtsi"
+#include "k3-j784s4-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
new file mode 100644
index 0000000000..2a4e0e084d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for pinctrl bindings for TI's K3 SoC
+ * family.
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef DTS_ARM64_TI_K3_PINCTRL_H
+#define DTS_ARM64_TI_K3_PINCTRL_H
+
+#define PULLUDEN_SHIFT		(16)
+#define PULLTYPESEL_SHIFT	(17)
+#define RXACTIVE_SHIFT		(18)
+#define DEBOUNCE_SHIFT		(11)
+
+#define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
+#define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
+
+#define PULL_UP			(1 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+#define PULL_DOWN		(0 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+
+#define INPUT_EN		(1 << RXACTIVE_SHIFT)
+#define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
+
+/* Only these macros are expected be used directly in device tree files */
+#define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(INPUT_DISABLE | PULL_DOWN)
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN | PULL_DOWN)
+
+#define PIN_DEBOUNCE_DISABLE	(0 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF1	(1 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF2	(2 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF3	(3 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF4	(4 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF5	(5 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF6	(6 << DEBOUNCE_SHIFT)
+
+#define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM62PX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62PX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM65X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM65X_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J721S2_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721S2_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J784S4_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J784S4_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#endif
diff --git a/arch/arm64/boot/dts/ti/k3-serdes.h b/arch/arm64/boot/dts/ti/k3-serdes.h
new file mode 100644
index 0000000000..29167f85c1
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-serdes.h
@@ -0,0 +1,204 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for SERDES MUX for TI SoCs
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#ifndef DTS_ARM64_TI_K3_SERDES_H
+#define DTS_ARM64_TI_K3_SERDES_H
+
+/* J721E */
+
+#define J721E_SERDES0_LANE0_QSGMII_LANE1	0x0
+#define J721E_SERDES0_LANE0_PCIE0_LANE0		0x1
+#define J721E_SERDES0_LANE0_USB3_0_SWAP		0x2
+#define J721E_SERDES0_LANE0_IP4_UNUSED		0x3
+
+#define J721E_SERDES0_LANE1_QSGMII_LANE2	0x0
+#define J721E_SERDES0_LANE1_PCIE0_LANE1		0x1
+#define J721E_SERDES0_LANE1_USB3_0		0x2
+#define J721E_SERDES0_LANE1_IP4_UNUSED		0x3
+
+#define J721E_SERDES1_LANE0_QSGMII_LANE3	0x0
+#define J721E_SERDES1_LANE0_PCIE1_LANE0		0x1
+#define J721E_SERDES1_LANE0_USB3_1_SWAP		0x2
+#define J721E_SERDES1_LANE0_SGMII_LANE0		0x3
+
+#define J721E_SERDES1_LANE1_QSGMII_LANE4	0x0
+#define J721E_SERDES1_LANE1_PCIE1_LANE1		0x1
+#define J721E_SERDES1_LANE1_USB3_1		0x2
+#define J721E_SERDES1_LANE1_SGMII_LANE1		0x3
+
+#define J721E_SERDES2_LANE0_IP1_UNUSED		0x0
+#define J721E_SERDES2_LANE0_PCIE2_LANE0		0x1
+#define J721E_SERDES2_LANE0_USB3_1_SWAP		0x2
+#define J721E_SERDES2_LANE0_SGMII_LANE0		0x3
+
+#define J721E_SERDES2_LANE1_IP1_UNUSED		0x0
+#define J721E_SERDES2_LANE1_PCIE2_LANE1		0x1
+#define J721E_SERDES2_LANE1_USB3_1		0x2
+#define J721E_SERDES2_LANE1_SGMII_LANE1		0x3
+
+#define J721E_SERDES3_LANE0_IP1_UNUSED		0x0
+#define J721E_SERDES3_LANE0_PCIE3_LANE0		0x1
+#define J721E_SERDES3_LANE0_USB3_0_SWAP		0x2
+#define J721E_SERDES3_LANE0_IP4_UNUSED		0x3
+
+#define J721E_SERDES3_LANE1_IP1_UNUSED		0x0
+#define J721E_SERDES3_LANE1_PCIE3_LANE1		0x1
+#define J721E_SERDES3_LANE1_USB3_0		0x2
+#define J721E_SERDES3_LANE1_IP4_UNUSED		0x3
+
+#define J721E_SERDES4_LANE0_EDP_LANE0		0x0
+#define J721E_SERDES4_LANE0_IP2_UNUSED		0x1
+#define J721E_SERDES4_LANE0_QSGMII_LANE5	0x2
+#define J721E_SERDES4_LANE0_IP4_UNUSED		0x3
+
+#define J721E_SERDES4_LANE1_EDP_LANE1		0x0
+#define J721E_SERDES4_LANE1_IP2_UNUSED		0x1
+#define J721E_SERDES4_LANE1_QSGMII_LANE6	0x2
+#define J721E_SERDES4_LANE1_IP4_UNUSED		0x3
+
+#define J721E_SERDES4_LANE2_EDP_LANE2		0x0
+#define J721E_SERDES4_LANE2_IP2_UNUSED		0x1
+#define J721E_SERDES4_LANE2_QSGMII_LANE7	0x2
+#define J721E_SERDES4_LANE2_IP4_UNUSED		0x3
+
+#define J721E_SERDES4_LANE3_EDP_LANE3		0x0
+#define J721E_SERDES4_LANE3_IP2_UNUSED		0x1
+#define J721E_SERDES4_LANE3_QSGMII_LANE8	0x2
+#define J721E_SERDES4_LANE3_IP4_UNUSED		0x3
+
+/* J7200 */
+
+#define J7200_SERDES0_LANE0_QSGMII_LANE3	0x0
+#define J7200_SERDES0_LANE0_PCIE1_LANE0		0x1
+#define J7200_SERDES0_LANE0_IP3_UNUSED		0x2
+#define J7200_SERDES0_LANE0_IP4_UNUSED		0x3
+
+#define J7200_SERDES0_LANE1_QSGMII_LANE4	0x0
+#define J7200_SERDES0_LANE1_PCIE1_LANE1		0x1
+#define J7200_SERDES0_LANE1_IP3_UNUSED		0x2
+#define J7200_SERDES0_LANE1_IP4_UNUSED		0x3
+
+#define J7200_SERDES0_LANE2_QSGMII_LANE1	0x0
+#define J7200_SERDES0_LANE2_PCIE1_LANE2		0x1
+#define J7200_SERDES0_LANE2_IP3_UNUSED		0x2
+#define J7200_SERDES0_LANE2_IP4_UNUSED		0x3
+
+#define J7200_SERDES0_LANE3_QSGMII_LANE2	0x0
+#define J7200_SERDES0_LANE3_PCIE1_LANE3		0x1
+#define J7200_SERDES0_LANE3_USB			0x2
+#define J7200_SERDES0_LANE3_IP4_UNUSED		0x3
+
+/* AM64 */
+
+#define AM64_SERDES0_LANE0_PCIE0		0x0
+#define AM64_SERDES0_LANE0_USB			0x1
+
+/* J721S2 */
+
+#define J721S2_SERDES0_LANE0_EDP_LANE0		0x0
+#define J721S2_SERDES0_LANE0_PCIE1_LANE0	0x1
+#define J721S2_SERDES0_LANE0_IP3_UNUSED		0x2
+#define J721S2_SERDES0_LANE0_IP4_UNUSED		0x3
+
+#define J721S2_SERDES0_LANE1_EDP_LANE1		0x0
+#define J721S2_SERDES0_LANE1_PCIE1_LANE1	0x1
+#define J721S2_SERDES0_LANE1_USB		0x2
+#define J721S2_SERDES0_LANE1_IP4_UNUSED		0x3
+
+#define J721S2_SERDES0_LANE2_EDP_LANE2		0x0
+#define J721S2_SERDES0_LANE2_PCIE1_LANE2	0x1
+#define J721S2_SERDES0_LANE2_IP3_UNUSED		0x2
+#define J721S2_SERDES0_LANE2_IP4_UNUSED		0x3
+
+#define J721S2_SERDES0_LANE3_EDP_LANE3		0x0
+#define J721S2_SERDES0_LANE3_PCIE1_LANE3	0x1
+#define J721S2_SERDES0_LANE3_USB		0x2
+#define J721S2_SERDES0_LANE3_IP4_UNUSED		0x3
+
+/* J784S4 */
+
+#define J784S4_SERDES0_LANE0_IP1_UNUSED		0x0
+#define J784S4_SERDES0_LANE0_PCIE1_LANE0	0x1
+#define J784S4_SERDES0_LANE0_IP3_UNUSED		0x2
+#define J784S4_SERDES0_LANE0_IP4_UNUSED		0x3
+
+#define J784S4_SERDES0_LANE1_IP1_UNUSED		0x0
+#define J784S4_SERDES0_LANE1_PCIE1_LANE1	0x1
+#define J784S4_SERDES0_LANE1_IP3_UNUSED		0x2
+#define J784S4_SERDES0_LANE1_IP4_UNUSED		0x3
+
+#define J784S4_SERDES0_LANE2_PCIE3_LANE0	0x0
+#define J784S4_SERDES0_LANE2_PCIE1_LANE2	0x1
+#define J784S4_SERDES0_LANE2_IP3_UNUSED		0x2
+#define J784S4_SERDES0_LANE2_IP4_UNUSED		0x3
+
+#define J784S4_SERDES0_LANE3_PCIE3_LANE1	0x0
+#define J784S4_SERDES0_LANE3_PCIE1_LANE3	0x1
+#define J784S4_SERDES0_LANE3_USB		0x2
+#define J784S4_SERDES0_LANE3_IP4_UNUSED		0x3
+
+#define J784S4_SERDES1_LANE0_QSGMII_LANE3	0x0
+#define J784S4_SERDES1_LANE0_PCIE0_LANE0	0x1
+#define J784S4_SERDES1_LANE0_IP3_UNUSED		0x2
+#define J784S4_SERDES1_LANE0_IP4_UNUSED		0x3
+
+#define J784S4_SERDES1_LANE1_QSGMII_LANE4	0x0
+#define J784S4_SERDES1_LANE1_PCIE0_LANE1	0x1
+#define J784S4_SERDES1_LANE1_IP3_UNUSED		0x2
+#define J784S4_SERDES1_LANE1_IP4_UNUSED		0x3
+
+#define J784S4_SERDES1_LANE2_QSGMII_LANE1	0x0
+#define J784S4_SERDES1_LANE2_PCIE0_LANE2	0x1
+#define J784S4_SERDES1_LANE2_PCIE2_LANE0	0x2
+#define J784S4_SERDES1_LANE2_IP4_UNUSED		0x3
+
+#define J784S4_SERDES1_LANE3_QSGMII_LANE2	0x0
+#define J784S4_SERDES1_LANE3_PCIE0_LANE3	0x1
+#define J784S4_SERDES1_LANE3_PCIE2_LANE1	0x2
+#define J784S4_SERDES1_LANE3_IP4_UNUSED		0x3
+
+#define J784S4_SERDES2_LANE0_QSGMII_LANE5	0x0
+#define J784S4_SERDES2_LANE0_IP2_UNUSED		0x1
+#define J784S4_SERDES2_LANE0_IP3_UNUSED		0x2
+#define J784S4_SERDES2_LANE0_IP4_UNUSED		0x3
+
+#define J784S4_SERDES2_LANE1_QSGMII_LANE6	0x0
+#define J784S4_SERDES2_LANE1_IP2_UNUSED		0x1
+#define J784S4_SERDES2_LANE1_IP3_UNUSED		0x2
+#define J784S4_SERDES2_LANE1_IP4_UNUSED		0x3
+
+#define J784S4_SERDES2_LANE2_QSGMII_LANE7	0x0
+#define J784S4_SERDES2_LANE2_QSGMII_LANE1	0x1
+#define J784S4_SERDES2_LANE2_IP3_UNUSED		0x2
+#define J784S4_SERDES2_LANE2_IP4_UNUSED		0x3
+
+#define J784S4_SERDES2_LANE3_QSGMII_LANE8	0x0
+#define J784S4_SERDES2_LANE3_QSGMII_LANE2	0x1
+#define J784S4_SERDES2_LANE3_IP3_UNUSED		0x2
+#define J784S4_SERDES2_LANE3_IP4_UNUSED		0x3
+
+#define J784S4_SERDES4_LANE0_EDP_LANE0		0x0
+#define J784S4_SERDES4_LANE0_QSGMII_LANE5	0x1
+#define J784S4_SERDES4_LANE0_IP3_UNUSED		0x2
+#define J784S4_SERDES4_LANE0_IP4_UNUSED		0x3
+
+#define J784S4_SERDES4_LANE1_EDP_LANE1		0x0
+#define J784S4_SERDES4_LANE1_QSGMII_LANE6	0x1
+#define J784S4_SERDES4_LANE1_IP3_UNUSED		0x2
+#define J784S4_SERDES4_LANE1_IP4_UNUSED		0x3
+
+#define J784S4_SERDES4_LANE2_EDP_LANE2		0x0
+#define J784S4_SERDES4_LANE2_QSGMII_LANE7	0x1
+#define J784S4_SERDES4_LANE2_IP3_UNUSED		0x2
+#define J784S4_SERDES4_LANE2_IP4_UNUSED		0x3
+
+#define J784S4_SERDES4_LANE3_EDP_LANE3		0x0
+#define J784S4_SERDES4_LANE3_QSGMII_LANE8	0x1
+#define J784S4_SERDES4_LANE3_USB		0x2
+#define J784S4_SERDES4_LANE3_IP4_UNUSED		0x3
+
+#endif /* DTS_ARM64_TI_K3_SERDES_H */
diff --git a/arch/arm64/boot/dts/toshiba/Makefile b/arch/arm64/boot/dts/toshiba/Makefile
new file mode 100644
index 0000000000..7ccb4664bb
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb
+dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-visrobo-vrb.dtb
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
new file mode 100644
index 0000000000..d209fdc985
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 RM main board
+ *
+ * (C) Copyright 2020, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708.dtsi"
+
+/ {
+	model = "Toshiba TMPV7708 RM main board";
+	compatible = "toshiba,tmpv7708-rm-mbrc", "toshiba,tmpv7708";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 768MB memory */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x30000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&piether {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@1 {
+			device_type = "ethernet-phy";
+			reg = <0x1>;
+		};
+	};
+};
+
+&wdt {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&pwm_mux {
+	groups = "pwm0_gpio16_grp", "pwm1_gpio17_grp", "pwm2_gpio18_grp", "pwm3_gpio19_grp";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
new file mode 100644
index 0000000000..ed7aa7e457
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 VisROBO VRB board
+ *
+ * (C) Copyright 2020, 2021, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708-visrobo-vrc.dtsi"
+
+/ {
+	model = "Toshiba TMPV7708 VisROBO (VRB) board";
+	compatible = "toshiba,tmpv7708-visrobo-vrb", "toshiba,tmpv7708";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 768MB memory */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x30000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&piether {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@1 {
+			device_type = "ethernet-phy";
+			reg = <0x1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
new file mode 100644
index 0000000000..0c8321022a
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 VisROBO VRC SoM
+ *
+ * (C) Copyright 2020, 2021, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+&wdt {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&spi0_pins {
+	groups = "spi0_grp", "spi0_cs0_grp";
+};
+
+&spi0 {
+	status = "okay";
+
+	mmc-slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		voltage-ranges = <3200 3400>;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
new file mode 100644
index 0000000000..b04829b317
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for the TMPV7708
+ *
+ * (C) Copyright 2018 - 2020, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ *
+ */
+
+#include <dt-bindings/clock/toshiba,tmpv770x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x81000000 0x00300000;	/* cpu-release-addr */
+
+/ {
+	compatible = "toshiba,tmpv7708";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x00>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x01>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x02>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x03>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts =
+			<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	extclk100mhz: extclk100mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "extclk100mhz";
+	};
+
+	osc2_clk: osc2-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		gic: interrupt-controller@24001000 {
+			compatible = "arm,gic-400";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			reg = <0 0x24001000 0 0x1000>,
+			      <0 0x24002000 0 0x2000>,
+			      <0 0x24004000 0 0x2000>,
+			      <0 0x24006000 0 0x2000>;
+		};
+
+		pmux: pmux@24190000 {
+			compatible = "toshiba,tmpv7708-pinctrl";
+			reg = <0 0x24190000 0 0x10000>;
+		};
+
+		gpio: gpio@28020000 {
+			compatible = "toshiba,gpio-tmpv7708";
+			reg = <0 0x28020000 0 0x1000>;
+			#gpio-cells = <0x2>;
+			gpio-ranges = <&pmux 0 0 32>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&gic>;
+		};
+
+		pipllct: clock-controller@24220000 {
+			compatible = "toshiba,tmpv7708-pipllct";
+			reg = <0 0x24220000 0 0x820>;
+			#clock-cells = <1>;
+			clocks = <&osc2_clk>;
+		};
+
+		pismu: syscon@24200000 {
+			compatible = "toshiba,tmpv7708-pismu", "syscon";
+			reg = <0 0x24200000 0 0x2140>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		uart0: serial@28200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x28200000 0 0x1000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+			clocks = <&pismu TMPV770X_CLK_PIUART0>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@28201000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x28201000 0 0x1000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
+			clocks = <&pismu TMPV770X_CLK_PIUART1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@28202000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x28202000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+			clocks = <&pismu TMPV770X_CLK_PIUART2>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@28203000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x28203000 0 0x1000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pins>;
+			clocks = <&pismu TMPV770X_CLK_PIUART2>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		i2c0: i2c@28030000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28030000 0 0x1000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@28031000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28031000 0 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@28032000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28032000 0 0x1000>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@28033000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28033000 0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C3>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@28034000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28034000 0 0x1000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C4>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@28035000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28035000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C5>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@28036000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28036000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C6>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@28037000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28037000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C7>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@28038000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28038000 0 0x1000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C8>;
+			status = "disabled";
+		};
+
+		spi0: spi@28140000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28140000 0 0x1000>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi1: spi@28141000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28141000 0 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi2: spi@28142000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28142000 0 0x1000>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI2>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi3: spi@28143000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28143000 0 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI3>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi4: spi@28144000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28144000 0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi4_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI4>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi5: spi@28145000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28145000 0 0x1000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi5_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI5>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi6: spi@28146000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28146000 0 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi6_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI6>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		piether: ethernet@28000000 {
+			compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a";
+			reg = <0 0x28000000 0 0x10000>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			snps,txpbl = <4>;
+			snps,rxpbl = <4>;
+			snps,tso;
+			clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>;
+			clock-names = "stmmaceth", "phy_ref_clk";
+			status = "disabled";
+		};
+
+		wdt: wdt@28330000 {
+			compatible = "toshiba,visconti-wdt";
+			reg = <0 0x28330000 0 0x1000>;
+			clocks = <&pismu TMPV770X_CLK_WDTCLK>;
+			status = "disabled";
+		};
+
+		pwm: pwm@241c0000 {
+			compatible = "toshiba,visconti-pwm";
+			reg = <0 0x241c0000 0 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm_mux>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pcie: pcie@28400000 {
+			compatible = "toshiba,visconti-pcie";
+			reg = <0x0 0x28400000 0x0 0x00400000>,
+			      <0x0 0x70000000 0x0 0x10000000>,
+			      <0x0 0x28050000 0x0 0x00010000>,
+			      <0x0 0x24200000 0x0 0x00002000>,
+			      <0x0 0x24162000 0x0 0x00001000>;
+			reg-names = "dbi", "config", "ulreg", "smu", "mpu";
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			num-viewport = <8>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000
+				  0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi", "intr";
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map =
+				<0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+				 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+				 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+				 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			max-link-speed = <2>;
+			clocks = <&extclk100mhz>, <&pismu TMPV770X_CLK_PCIE_MSTR>, <&pismu TMPV770X_CLK_PCIE_AUX>;
+			clock-names = "ref", "core", "aux";
+			status = "disabled";
+		};
+	};
+};
+
+#include "tmpv7708_pins.dtsi"
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi
new file mode 100644
index 0000000000..a480c6ba5f
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&pmux {
+	spi0_pins: spi0-pins {
+		function = "spi0";
+		groups = "spi0_grp";
+	};
+	spi1_pins: spi1-pins {
+		function = "spi1";
+		groups = "spi1_grp";
+	};
+	spi2_pins: spi2-pins {
+		function = "spi2";
+		groups = "spi2_grp";
+	};
+	spi3_pins: spi3-pins {
+		function = "spi3";
+		groups = "spi3_grp";
+	};
+	spi4_pins: spi4-pins {
+		function = "spi4";
+		groups = "spi4_grp";
+	};
+	spi5_pins: spi5-pins {
+		function = "spi5";
+		groups = "spi5_grp";
+	};
+	spi6_pins: spi6-pins {
+		function = "spi6";
+		groups = "spi6_grp";
+	};
+	uart0_pins: uart0-pins {
+		function = "uart0";
+		groups = "uart0_grp";
+	};
+	uart1_pins: uart1-pins {
+		function = "uart1";
+		groups = "uart1_grp";
+	};
+	uart2_pins: uart2-pins {
+		function = "uart2";
+		groups = "uart2_grp";
+	};
+	uart3_pins: uart3-pins {
+		function = "uart3";
+		groups = "uart3_grp";
+	};
+	i2c0_pins: i2c0-pins {
+		function = "i2c0";
+		groups = "i2c0_grp";
+		bias-pull-up;
+	};
+	i2c1_pins: i2c1-pins {
+		function = "i2c1";
+		groups = "i2c1_grp";
+		bias-pull-up;
+	};
+	i2c2_pins: i2c2-pins {
+		function = "i2c2";
+		groups = "i2c2_grp";
+		bias-pull-up;
+	};
+	i2c3_pins: i2c3-pins {
+		function = "i2c3";
+		groups = "i2c3_grp";
+		bias-pull-up;
+	};
+	i2c4_pins: i2c4-pins {
+		function = "i2c4";
+		groups = "i2c4_grp";
+		bias-pull-up;
+	};
+	i2c5_pins: i2c5-pins {
+		function = "i2c5";
+		groups = "i2c5_grp";
+		bias-pull-up;
+	};
+	i2c6_pins: i2c6-pins {
+		function = "i2c6";
+		groups = "i2c6_grp";
+		bias-pull-up;
+	};
+	i2c7_pins: i2c7-pins {
+		function = "i2c7";
+		groups = "i2c7_grp";
+		bias-pull-up;
+	};
+	i2c8_pins: i2c8-pins {
+		function = "i2c8";
+		groups = "i2c8_grp";
+		bias-pull-up;
+	};
+
+	pwm_mux: pwm_mux {
+		function = "pwm";
+	};
+
+};
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
new file mode 100644
index 0000000000..1068b0fa8e
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ZYNQMP) += avnet-ultra96-rev1.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm018-dc4.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm019-dc5.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.1.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu1275-revA.dtb
+
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb
+
+zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revA.dtb
+zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revB.dtb
+zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
+zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
diff --git a/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts
new file mode 100644
index 0000000000..4c1bd69e75
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Avnet Ultra96 rev1
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp-zcu100-revC.dts"
+
+/ {
+	model = "Avnet Ultra96 Rev1";
+	compatible = "avnet,ultra96-rev1", "avnet,ultra96",
+		     "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100",
+		     "xlnx,zynqmp";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
new file mode 100644
index 0000000000..ccaca29200
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+/ {
+	pss_ref_clk: pss_ref_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33333333>;
+	};
+
+	video_clk: video_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	pss_alt_ref_clk: pss_alt_ref_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	gt_crx_ref_clk: gt_crx_ref_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <108000000>;
+	};
+
+	aux_ref_clk: aux_ref_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&zynqmp_firmware {
+	zynqmp_clk: clock-controller {
+		bootph-all;
+		#clock-cells = <1>;
+		compatible = "xlnx,zynqmp-clk";
+		clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
+			 <&aux_ref_clk>, <&gt_crx_ref_clk>;
+		clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
+			      "aux_ref_clk", "gt_crx_ref_clk";
+	};
+};
+
+&can0 {
+	clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&can1 {
+	clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&cpu0 {
+	clocks = <&zynqmp_clk ACPU>;
+};
+
+&fpd_dma_chan1 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gpu {
+	clocks = <&zynqmp_clk GPU_REF>, <&zynqmp_clk GPU_PP0_REF>;
+};
+
+&lpd_dma_chan1 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan2 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan3 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan4 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan5 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan6 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan7 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan8 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&nand0 {
+	clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gem0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
+		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
+};
+
+&gem1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+		 <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
+};
+
+&gem2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
+		 <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
+};
+
+&gem3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
+		 <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
+};
+
+&gpio {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&i2c0 {
+	clocks = <&zynqmp_clk I2C0_REF>;
+};
+
+&i2c1 {
+	clocks = <&zynqmp_clk I2C1_REF>;
+};
+
+&pcie {
+	clocks = <&zynqmp_clk PCIE_REF>;
+};
+
+&qspi {
+	clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&sata {
+	clocks = <&zynqmp_clk SATA_REF>;
+};
+
+&sdhci0 {
+	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk SDIO0_REF>;
+};
+
+&sdhci1 {
+	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk SDIO1_REF>;
+};
+
+&spi0 {
+	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi1 {
+	clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart0 {
+	clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart1 {
+	clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&dwc3_0 {
+	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&dwc3_1 {
+	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&watchdog0 {
+	clocks = <&zynqmp_clk WDT>;
+};
+
+&lpd_watchdog {
+	clocks = <&zynqmp_clk LPD_WDT>;
+};
+
+&xilinx_ams {
+	clocks = <&zynqmp_clk AMS_REF>;
+};
+
+&zynqmp_dpdma {
+	clocks = <&zynqmp_clk DPDMA_REF>;
+	assigned-clocks = <&zynqmp_clk DPDMA_REF>; /* apll */
+};
+
+&zynqmp_dpsub {
+	clocks = <&zynqmp_clk TOPSW_LSBUS>,
+		 <&zynqmp_clk DP_AUDIO_REF>,
+		 <&zynqmp_clk DP_VIDEO_REF>;
+	assigned-clocks = <&zynqmp_clk DP_STC_REF>,
+			  <&zynqmp_clk DP_AUDIO_REF>,
+			  <&zynqmp_clk DP_VIDEO_REF>;  /* rpll, rpll, vpll */
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
new file mode 100644
index 0000000000..ae1b9b2bdb
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KV260 revA Carrier Card
+ *
+ * (C) Copyright 2020 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * SD level shifter:
+ * "A" - A01 board un-modified (NXP)
+ * "Y" - A01 board modified with legacy interposer (Nexperia)
+ * "Z" - A01 board modified with Diode interposer
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
+&amba {
+	si5332_0: si5332_0 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	si5332_1: si5332_1 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	si5332_2: si5332_2 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	si5332_3: si5332_3 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	si5332_4: si5332_4 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	si5332_5: si5332_5 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+/* DP/USB 3.0 and SATA */
+&psgtr {
+	status = "okay";
+	/* pcie, usb3, sata */
+	clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
+	clock-names = "ref0", "ref1", "ref2";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 2>;
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+	assigned-clock-rates = <600000000>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
+	/* missing usb5744 - u43 */
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&sdhci1 { /* on CC with tuned parameters */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	/*
+	 * SD 3.0 requires level shifter and this property
+	 * should be removed if the board has level shifter and
+	 * need to work in UHS mode
+	 */
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+	assigned-clock-rates = <187498123>;
+	bus-width = <4>;
+};
+
+&gem3 { /* required by spec */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			#phy-cells = <1>;
+			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl0 { /* required by spec */
+	status = "okay";
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO72", "MIO74";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO71", "MIO73", "MIO75";
+			bias-disable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66",
+				"MIO67", "MIO68", "MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
new file mode 100644
index 0000000000..b59e48be64
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KV260 revA Carrier Card
+ *
+ * (C) Copyright 2020 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u43 - 0x2d - usb5744 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
+&amba {
+	si5332_0: si5332_0 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	si5332_1: si5332_1 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	si5332_2: si5332_2 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	si5332_3: si5332_3 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	si5332_4: si5332_4 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	si5332_5: si5332_5 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+/* DP/USB 3.0 */
+&psgtr {
+	status = "okay";
+	/* pcie, usb3, sata */
+	clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
+	clock-names = "ref0", "ref1", "ref2";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+	assigned-clock-rates = <600000000>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&sdhci1 { /* on CC with tuned parameters */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	/*
+	 * SD 3.0 requires level shifter and this property
+	 * should be removed if the board has level shifter and
+	 * need to work in UHS mode
+	 */
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+	clk-phase-sd-hs = <126>, <60>;
+	clk-phase-uhs-sdr25 = <120>, <60>;
+	clk-phase-uhs-ddr50 = <126>, <48>;
+	assigned-clock-rates = <187498123>;
+	bus-width = <4>;
+};
+
+&gem3 { /* required by spec */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			#phy-cells = <1>;
+			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl0 { /* required by spec */
+	status = "okay";
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO72", "MIO74";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO71", "MIO73", "MIO75";
+			bias-disable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66",
+				"MIO67", "MIO68", "MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
new file mode 100644
index 0000000000..c4774a42d5
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SM-K26 rev1/B/A
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP SM-K26 Rev1/B/A";
+	compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB",
+		     "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26",
+		     "xlnx,zynqmp";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		nvmem0 = &eeprom;
+		nvmem1 = &eeprom_cc;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		spi1 = &spi0;
+		spi2 = &spi1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory"; /* 4GB */
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pmu_region: pmu@7ff00000 {
+			reg = <0x0 0x7ff00000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		key-fwuen {
+			label = "fwuen";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ds35-led {
+			label = "heartbeat";
+			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds36-led {
+			label = "vbus_det";
+			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	ams {
+		compatible = "iio-hwmon";
+		io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
+			<&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
+			<&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
+			<&xilinx_ams 9>, <&xilinx_ams 10>, <&xilinx_ams 11>,
+			<&xilinx_ams 12>, <&xilinx_ams 13>, <&xilinx_ams 14>,
+			<&xilinx_ams 15>, <&xilinx_ams 16>, <&xilinx_ams 17>,
+			<&xilinx_ams 18>, <&xilinx_ams 19>, <&xilinx_ams 20>,
+			<&xilinx_ams 21>, <&xilinx_ams 22>, <&xilinx_ams 23>,
+			<&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>,
+			<&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>;
+	};
+};
+
+&modepin_gpio {
+	label = "modepin";
+};
+
+&uart1 { /* MIO36/MIO37 */
+	status = "okay";
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_sdhci0_default: sdhci0-default {
+		conf {
+			groups = "sdio0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux {
+			groups = "sdio0_0_grp";
+			function = "sdio0";
+		};
+	};
+};
+
+&qspi { /* MIO 0-5 - U143 */
+	status = "okay";
+	spi_flash: flash@0 { /* MT25QU512A */
+		compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>; /* 40MHz */
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Image Selector";
+				reg = <0x0 0x80000>; /* 512KB */
+				read-only;
+				lock;
+			};
+			partition@80000 {
+				label = "Image Selector Golden";
+				reg = <0x80000 0x80000>; /* 512KB */
+				read-only;
+				lock;
+			};
+			partition@100000 {
+				label = "Persistent Register";
+				reg = <0x100000 0x20000>; /* 128KB */
+			};
+			partition@120000 {
+				label = "Persistent Register Backup";
+				reg = <0x120000 0x20000>; /* 128KB */
+			};
+			partition@140000 {
+				label = "Open_1";
+				reg = <0x140000 0xC0000>; /* 768KB */
+			};
+			partition@200000 {
+				label = "Image A (FSBL, PMU, ATF, U-Boot)";
+				reg = <0x200000 0xD00000>; /* 13MB */
+			};
+			partition@f00000 {
+				label = "ImgSel Image A Catch";
+				reg = <0xF00000 0x80000>; /* 512KB */
+				read-only;
+				lock;
+			};
+			partition@f80000 {
+				label = "Image B (FSBL, PMU, ATF, U-Boot)";
+				reg = <0xF80000 0xD00000>; /* 13MB */
+			};
+			partition@1c80000 {
+				label = "ImgSel Image B Catch";
+				reg = <0x1C80000 0x80000>; /* 512KB */
+				read-only;
+				lock;
+			};
+			partition@1d00000 {
+				label = "Open_2";
+				reg = <0x1D00000 0x100000>; /* 1MB */
+			};
+			partition@1e00000 {
+				label = "Recovery Image";
+				reg = <0x1E00000 0x200000>; /* 2MB */
+				read-only;
+				lock;
+			};
+			partition@2000000 {
+				label = "Recovery Image Backup";
+				reg = <0x2000000 0x200000>; /* 2MB */
+				read-only;
+				lock;
+			};
+			partition@2200000 {
+				label = "U-Boot storage variables";
+				reg = <0x2200000 0x20000>; /* 128KB */
+			};
+			partition@2220000 {
+				label = "U-Boot storage variables backup";
+				reg = <0x2220000 0x20000>; /* 128KB */
+			};
+			partition@2240000 {
+				label = "SHA256";
+				reg = <0x2240000 0x40000>; /* 256B but 256KB sector */
+				read-only;
+				lock;
+			};
+			partition@2280000 {
+				label = "Secure OS Storage";
+				reg = <0x2280000 0x20000>; /* 128KB */
+			};
+			partition@22A0000 {
+				label = "User";
+				reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
+			};
+		};
+	};
+};
+
+&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	non-removable;
+	disable-wp;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>;
+	assigned-clock-rates = <187498123>;
+};
+
+&spi1 { /* MIO6, 9-11 */
+	status = "okay";
+	label = "TPM";
+	num-cs = <1>;
+	tpm@0 { /* slm9670 - U144 */
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bootph-all;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	eeprom: eeprom@50 { /* u46 - also at address 0x58 */
+		bootph-all;
+		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
+		reg = <0x50>;
+		/* WP pin EE_WP_EN connected to slg7x644092@68 */
+	};
+
+	eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
+		bootph-all;
+		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
+		reg = <0x51>;
+	};
+
+	/* da9062@30 - u170 - also at address 0x31 */
+	/* da9131@33 - u167 */
+	da9131: pmic@33 {
+		compatible = "dlg,da9131";
+		reg = <0x33>;
+		regulators {
+			da9131_buck1: buck1 {
+				regulator-name = "da9131_buck1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			da9131_buck2: buck2 {
+				regulator-name = "da9131_buck2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* da9130@32 - u166 */
+	da9130: pmic@32 {
+		compatible = "dlg,da9130";
+		reg = <0x32>;
+		regulators {
+			da9130_buck1: buck1 {
+				regulator-name = "da9130_buck1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* slg7x644091@70 - u168 NOT accessible due to address conflict with stdp4320 */
+	/*
+	 * stdp4320 - u27 FW has below two issues to be fixed in next board revision.
+	 * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76.
+	 * Address conflict with slg7x644091@70 making both the devices NOT accessible.
+	 * With the FW fix, stdp4320 should respond to address 0x73 only.
+	 */
+	/* slg7x644092@68 - u169 */
+	/* Also connected via JA1C as C23/C24 */
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
+			  "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */
+			  "SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+			  "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+			  "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */
+			  "I2C1_SDA", "", "", "", "", /* 25 - 29 */
+			  "", "", "", "", "", /* 30 - 34 */
+			  "", "", "", "", "", /* 35 - 39 */
+			  "", "", "", "", "", /* 40 - 44 */
+			  "", "", "", "", "", /* 45 - 49 */
+			  "", "", "", "", "", /* 50 - 54 */
+			  "", "", "", "", "", /* 55 - 59 */
+			  "", "", "", "", "", /* 60 - 64 */
+			  "", "", "", "", "", /* 65 - 69 */
+			  "", "", "", "", "", /* 70 - 74 */
+			  "", "", "", /* 75 - 77, MIO end and EMIO start */
+			  "", "", /* 78 - 79 */
+			  "", "", "", "", "", /* 80 - 84 */
+			  "", "", "", "", "", /* 85 - 89 */
+			  "", "", "", "", "", /* 90 - 94 */
+			  "", "", "", "", "", /* 95 - 99 */
+			  "", "", "", "", "", /* 100 - 104 */
+			  "", "", "", "", "", /* 105 - 109 */
+			  "", "", "", "", "", /* 110 - 114 */
+			  "", "", "", "", "", /* 115 - 119 */
+			  "", "", "", "", "", /* 120 - 124 */
+			  "", "", "", "", "", /* 125 - 129 */
+			  "", "", "", "", "", /* 130 - 134 */
+			  "", "", "", "", "", /* 135 - 139 */
+			  "", "", "", "", "", /* 140 - 144 */
+			  "", "", "", "", "", /* 145 - 149 */
+			  "", "", "", "", "", /* 150 - 154 */
+			  "", "", "", "", "", /* 155 - 159 */
+			  "", "", "", "", "", /* 160 - 164 */
+			  "", "", "", "", "", /* 165 - 169 */
+			  "", "", "", ""; /* 170 - 173 */
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&lpd_dma_chan1 {
+	status = "okay";
+};
+
+&lpd_dma_chan2 {
+	status = "okay";
+};
+
+&lpd_dma_chan3 {
+	status = "okay";
+};
+
+&lpd_dma_chan4 {
+	status = "okay";
+};
+
+&lpd_dma_chan5 {
+	status = "okay";
+};
+
+&lpd_dma_chan6 {
+	status = "okay";
+};
+
+&lpd_dma_chan7 {
+	status = "okay";
+};
+
+&lpd_dma_chan8 {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&lpd_watchdog {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&cpu_opp_table {
+	opp00 {
+		opp-hz = /bits/ 64 <1333333333>;
+	};
+	opp01 {
+		opp-hz = /bits/ 64 <666666666>;
+	};
+	opp02 {
+		opp-hz = /bits/ 64 <444444444>;
+	};
+	opp03 {
+		opp-hz = /bits/ 64 <333333333>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
new file mode 100644
index 0000000000..85b0d16772
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SMK-K26 rev1/B/A
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sm-k26-revA.dts"
+
+/ {
+	model = "ZynqMP SMK-K26 Rev1/B/A";
+	compatible = "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB",
+		     "xlnx,zynqmp-smk-k26-revA", "xlnx,zynqmp-smk-k26",
+		     "xlnx,zynqmp";
+};
+
+&sdhci0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
new file mode 100644
index 0000000000..04079d1704
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZC1232
+ *
+ * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZC1232 RevA";
+	compatible = "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232", "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
new file mode 100644
index 0000000000..3dec57cf18
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZC1254
+ *
+ * (C) Copyright 2015 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZC1254 RevA";
+	compatible = "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254", "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
new file mode 100644
index 0000000000..e821d55d8d
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm015-dc1
+ *
+ * (C) Copyright 2015 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP zc1751-xm015-dc1 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	clock_si5338_0: clk27 {	/* u55 SI5338-GM */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	clock_si5338_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_si5338_3: clk150 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <150000000>;
+	};
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	eeprom: eeprom@55 {
+		compatible = "atmel,24c64"; /* 24AA64 */
+		reg = <0x55>;
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_9_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_9_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_36_grp", "gpio0_37_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_36_grp", "gpio0_37_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_8_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_8_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO34";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO35";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_0_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio0_wp_0_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "sdio0_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio1_wp_0_grp";
+			function = "sdio1_wp";
+		};
+
+		conf-wp {
+			groups = "sdio1_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_38_grp";
+		};
+
+		conf {
+			groups = "gpio0_38_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* dp, usb3, sata */
+	clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA phy OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
+};
+
+/* eMMC */
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 0>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
new file mode 100644
index 0000000000..b59e11316b
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm016-dc2
+ *
+ * (C) Copyright 2015 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP zc1751-xm016-dc2 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem2;
+		i2c0 = &i2c0;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		usb0 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem2 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem2_default>;
+	phy0: ethernet-phy@5 {
+		reg = <5>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u26: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* IRQ not connected */
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&nand0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand0_default>;
+	arasan,has-mdma;
+
+	nand@0 {
+		reg = <0x0>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-0";
+	};
+	nand@1 {
+		reg = <0x1>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-1";
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO38";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO39";
+			bias-disable;
+		};
+	};
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_8_grp";
+		};
+
+		conf {
+			groups = "can1_8_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO33";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO32";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_1_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_1_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_6_grp", "gpio0_7_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_6_grp", "gpio0_7_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_10_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_10_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO42";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO43";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO41";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO40";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			       "MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem2_default: gem2-default {
+		mux {
+			function = "ethernet2";
+			groups = "ethernet2_0_grp";
+		};
+
+		conf {
+			groups = "ethernet2_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO58", "MIO59", "MIO60", "MIO61", "MIO62",
+									"MIO63";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO52", "MIO53", "MIO54", "MIO55", "MIO56",
+									"MIO57";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio2";
+			groups = "mdio2_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio2_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_nand0_default: nand0-default {
+		mux {
+			groups = "nand0_0_grp";
+			function = "nand0";
+		};
+
+		conf {
+			groups = "nand0_0_grp";
+			bias-pull-up;
+		};
+
+		mux-ce {
+			groups = "nand0_ce_0_grp";
+			function = "nand0_ce";
+		};
+
+		conf-ce {
+			groups = "nand0_ce_0_grp";
+			bias-pull-up;
+		};
+
+		mux-rb {
+			groups = "nand0_rb_0_grp";
+			function = "nand0_rb";
+		};
+
+		conf-rb {
+			groups = "nand0_rb_0_grp";
+			bias-pull-up;
+		};
+
+		mux-dqs {
+			groups = "nand0_dqs_0_grp";
+			function = "nand0_dqs";
+		};
+
+		conf-dqs {
+			groups = "nand0_dqs_0_grp";
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spi0_default: spi0-default {
+		mux {
+			groups = "spi0_0_grp";
+			function = "spi0";
+		};
+
+		conf {
+			groups = "spi0_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi0_ss_0_grp", "spi0_ss_1_grp",
+							"spi0_ss_2_grp";
+			function = "spi0_ss";
+		};
+
+		conf-cs {
+			groups = "spi0_ss_0_grp", "spi0_ss_1_grp",
+							"spi0_ss_2_grp";
+			bias-disable;
+		};
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		mux {
+			groups = "spi1_3_grp";
+			function = "spi1";
+		};
+
+		conf {
+			groups = "spi1_3_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi1_ss_9_grp", "spi1_ss_10_grp",
+							"spi1_ss_11_grp";
+			function = "spi1_ss";
+		};
+
+		conf-cs {
+			groups = "spi1_ss_9_grp", "spi1_ss_10_grp",
+							"spi1_ss_11_grp";
+			bias-disable;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+
+	spi0_flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25wf080", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "spi0-data";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	spi1_flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "spi1-data";
+			reg = <0x0 0x84000>;
+		};
+	};
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
new file mode 100644
index 0000000000..38b0a31217
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm017-dc3
+ *
+ * (C) Copyright 2016 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP zc1751-xm017-dc3 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	clock_si5338_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_si5338_3: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: ethernet-phy@0 { /* VSC8211 */
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+/* just eeprom here */
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416_u26: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* IRQ not connected */
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+/* eeprom24c02 and SE98A temp chip pca9306 */
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+/* MT29F64G08AECDBJ4-6 */
+&nand0 {
+	status = "okay";
+	arasan,has-mdma;
+	num-cs = <2>;
+};
+
+&psgtr {
+	status = "okay";
+	/* usb3, sata */
+	clocks = <&clock_si5338_2>, <&clock_si5338_3>;
+	clock-names = "ref2", "ref3";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA phy OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 2 PHY_TYPE_SATA 0 3>;
+};
+
+&sdhci1 { /* emmc with some settings */
+	status = "okay";
+};
+
+/* main */
+&uart0 {
+	status = "okay";
+};
+
+/* DB9 */
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 0 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
new file mode 100644
index 0000000000..6636e76545
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm018-dc4
+ *
+ * (C) Copyright 2015 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP zc1751-xm018-dc4";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		ethernet1 = &gem1;
+		ethernet2 = &gem2;
+		ethernet3 = &gem3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&lpd_dma_chan1 {
+	status = "okay";
+};
+
+&lpd_dma_chan2 {
+	status = "okay";
+};
+
+&lpd_dma_chan3 {
+	status = "okay";
+};
+
+&lpd_dma_chan4 {
+	status = "okay";
+};
+
+&lpd_dma_chan5 {
+	status = "okay";
+};
+
+&lpd_dma_chan6 {
+	status = "okay";
+};
+
+&lpd_dma_chan7 {
+	status = "okay";
+};
+
+&lpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+		reg = <0>;
+	};
+	ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+		reg = <7>;
+	};
+	ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+		reg = <3>;
+	};
+	ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+		reg = <8>;
+	};
+};
+
+&gem1 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy7>;
+};
+
+&gem2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy3>;
+};
+
+&gem3 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy8>;
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
new file mode 100644
index 0000000000..0d2ea9c09a
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm019-dc5
+ *
+ * (C) Copyright 2015 - 2021, Xilinx, Inc.
+ *
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP zc1751-xm019-dc5 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem1_default>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 74 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 75 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 76 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 77 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_18_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_18_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_74_grp", "gpio0_75_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_74_grp", "gpio0_75_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_19_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_19_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_76_grp", "gpio0_77_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_76_grp", "gpio0_77_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_17_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO71";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_18_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_18_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO73";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO72";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem1_default: gem1-default {
+		mux {
+			function = "ethernet1";
+			groups = "ethernet1_0_grp";
+		};
+
+		conf {
+			groups = "ethernet1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO44", "MIO45", "MIO46", "MIO47", "MIO48",
+									"MIO49";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO38", "MIO39", "MIO40", "MIO41", "MIO42",
+									"MIO43";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio1";
+			groups = "mdio1_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_0_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio0_wp_0_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "sdio0_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_watchdog0_default: watchdog0-default {
+		mux-clk {
+			groups = "swdt0_clk_1_grp";
+			function = "swdt0_clk";
+		};
+
+		conf-clk {
+			groups = "swdt0_clk_1_grp";
+			bias-pull-up;
+		};
+
+		mux-rst {
+			groups = "swdt0_rst_1_grp";
+			function = "swdt0_rst";
+		};
+
+		conf-rst {
+			groups = "swdt0_rst_1_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc0_default: ttc0-default {
+		mux-clk {
+			groups = "ttc0_clk_0_grp";
+			function = "ttc0_clk";
+		};
+
+		conf-clk {
+			groups = "ttc0_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc0_wav_0_grp";
+			function = "ttc0_wav";
+		};
+
+		conf-wav {
+			groups = "ttc0_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc1_default: ttc1-default {
+		mux-clk {
+			groups = "ttc1_clk_0_grp";
+			function = "ttc1_clk";
+		};
+
+		conf-clk {
+			groups = "ttc1_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc1_wav_0_grp";
+			function = "ttc1_wav";
+		};
+
+		conf-wav {
+			groups = "ttc1_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc2_default: ttc2-default {
+		mux-clk {
+			groups = "ttc2_clk_0_grp";
+			function = "ttc2_clk";
+		};
+
+		conf-clk {
+			groups = "ttc2_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc2_wav_0_grp";
+			function = "ttc2_wav";
+		};
+
+		conf-wav {
+			groups = "ttc2_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc3_default: ttc3-default {
+		mux-clk {
+			groups = "ttc3_clk_0_grp";
+			function = "ttc3_clk";
+		};
+
+		conf-clk {
+			groups = "ttc3_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc3_wav_0_grp";
+			function = "ttc3_wav";
+		};
+
+		conf-wav {
+			groups = "ttc3_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	no-1-8-v;
+	xlnx,mio-bank = <0>;
+};
+
+&ttc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc0_default>;
+};
+
+&ttc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc1_default>;
+};
+
+&ttc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc2_default>;
+};
+
+&ttc3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc3_default>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&watchdog0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_watchdog0_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
new file mode 100644
index 0000000000..d0091d3cb7
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU100 revC
+ *
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ * Nathalie Chan King Choy
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU100 RevC";
+	compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp";
+
+	aliases {
+		i2c0 = &i2c1;
+		rtc0 = &rtc;
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &dcc;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-4 {
+			label = "sw4";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
+			      <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
+			      <&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
+			      <&xilinx_ams 9>, <&xilinx_ams 10>,
+			      <&xilinx_ams 11>, <&xilinx_ams 12>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-ds2 {
+			label = "ds2";
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-ds3 {
+			label = "ds3";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx"; /* WLAN tx */
+			default-state = "off";
+		};
+
+		led-ds4 {
+			label = "ds4";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0rx"; /* WLAN rx */
+			default-state = "off";
+		};
+
+		led-ds5 {
+			label = "ds5";
+			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+		};
+
+		led-vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
+			label = "vbus_det";
+			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	wmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "wmmcsdio_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		post-power-on-delay-ms = <10>;
+	};
+
+	ina226 {
+		compatible = "iio-hwmon";
+		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
+	};
+
+	si5335_0: si5335_0 { /* clk0_usb - u23 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	si5335_1: si5335_1 { /* clk1_dp - u23 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL",
+			  "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS",
+			  "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1",
+			  "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1",
+			  "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT",
+			  "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE",
+			  "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL",
+			  "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C",
+			  "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E",
+			  "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3",
+			  "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2",
+			  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3",
+			  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK",
+			  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1",
+			  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6",
+			  "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */
+			  "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	i2c-mux@75 { /* u11 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2csw_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			label = "LS-I2C0";
+		};
+		i2csw_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			label = "LS-I2C1";
+		};
+		i2csw_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			label = "HS-I2C2";
+		};
+		i2csw_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			label = "HS-I2C3";
+		};
+		i2csw_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pmic: pmic@5e { /* Custom TI PMIC u33 */
+				compatible = "ti,tps65086";
+				reg = <0x5e>;
+				interrupt-parent = <&gpio>;
+				interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+		i2csw_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* PS_PMBUS */
+			u35: ina226@40 { /* u35 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				reg = <0x40>;
+				shunt-resistor = <10000>;
+				/* MIO31 is alert which should be routed to PMUFW */
+			};
+		};
+		i2csw_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/*
+			 * Not Connected
+			 */
+		};
+		i2csw_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/*
+			 * usb5744 (DNP) - U5
+			 * 100kHz - this is default freq for us
+			 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_1_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_1_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_4_grp", "gpio0_5_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_4_grp", "gpio0_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_3_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_3_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_2_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_2_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_spi0_default: spi0-default {
+		mux {
+			groups = "spi0_3_grp";
+			function = "spi0";
+		};
+
+		conf {
+			groups = "spi0_3_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi0_ss_9_grp";
+			function = "spi0_ss";
+		};
+
+		conf-cs {
+			groups = "spi0_ss_9_grp";
+			bias-disable;
+		};
+
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		mux {
+			groups = "spi1_0_grp";
+			function = "spi1";
+		};
+
+		conf {
+			groups = "spi1_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi1_ss_0_grp";
+			function = "spi1_ss";
+		};
+
+		conf-cs {
+			groups = "spi1_ss_0_grp";
+			bias-disable;
+		};
+
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_0_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO3";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO2";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_0_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO1";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO0";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			       "MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* usb3, dp */
+	clocks = <&si5335_0>, <&si5335_1>;
+	clock-names = "ref0", "ref1";
+};
+
+&rtc {
+	status = "okay";
+};
+
+/* SD0 only supports 3.3V, no level shifter */
+&sdhci0 {
+	status = "okay";
+	no-1-8-v;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	xlnx,mio-bank = <0>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <0>;
+	non-removable;
+	disable-wp;
+	cap-power-off-card;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vqmmc-supply = <&wmmcsdio_fixed>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wifi@2 {
+		compatible = "ti,wl1831";
+		reg = <2>;
+		interrupt-parent = <&gpio>;
+		interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */
+	};
+};
+
+&spi0 { /* Low Speed connector */
+	status = "okay";
+	label = "LS-SPI0";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+};
+
+&spi1 { /* High Speed connector */
+	status = "okay";
+	label = "HS-SPI1";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
+	/delete-property/ reset-gpios;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	maximum-speed = "super-speed";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
+	reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
new file mode 100644
index 0000000000..c8f71a1aec
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 Rev1.0
+ *
+ * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-zcu102-revB.dts"
+
+/ {
+	model = "ZynqMP ZCU102 Rev1.0";
+	compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
+
+&eeprom {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	board_sn: board-sn@0 {
+		reg = <0x0 0x14>;
+	};
+
+	eth_mac: eth-mac@20 {
+		reg = <0x20 0x6>;
+	};
+
+	board_name: board-name@d0 {
+		reg = <0xd0 0x6>;
+	};
+
+	board_revision: board-revision@e0 {
+		reg = <0xe0 0x3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts
new file mode 100644
index 0000000000..705369766a
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 Rev1.1
+ *
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-zcu102-rev1.0.dts"
+
+/ {
+	model = "ZynqMP ZCU102 Rev1.1";
+	compatible = "xlnx,zynqmp-zcu102-rev1.1", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
new file mode 100644
index 0000000000..84952c14f0
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -0,0 +1,1050 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevA
+ *
+ * (C) Copyright 2015 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU102 RevA";
+	compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	refhdmi: refhdmi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <114285000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@21 {
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <21>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u97: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* IRQ not connected */
+		#gpio-cells = <2>;
+		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+				"", "", "", "", "", "", "", "", "";
+		gtr-sel0-hog {
+			gpio-hog;
+			gpios = <0 0>;
+			output-low; /* PCIE = 0, DP = 1 */
+			line-name = "sel0";
+		};
+		gtr-sel1-hog {
+			gpio-hog;
+			gpios = <1 0>;
+			output-high; /* PCIE = 0, DP = 1 */
+			line-name = "sel1";
+		};
+		gtr-sel2-hog {
+			gpio-hog;
+			gpios = <2 0>;
+			output-high; /* PCIE = 0, USB0 = 1 */
+			line-name = "sel2";
+		};
+		gtr-sel3-hog {
+			gpio-hog;
+			gpios = <3 0>;
+			output-high; /* PCIE = 0, SATA = 1 */
+			line-name = "sel3";
+		};
+	};
+
+	tca6416_u61: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller; /* IRQ not connected */
+		#gpio-cells = <2>;
+		gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+				"PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+				"PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+				"PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
+	};
+
+	i2c-mux@75 { /* u60 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			u76: ina226@40 { /* u76 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			u77: ina226@41 { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u78: ina226@42 { /* u78 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u87: ina226@43 { /* u87 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u85: ina226@44 { /* u85 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u86: ina226@45 { /* u86 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u93: ina226@46 { /* u93 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u88: ina226@47 { /* u88 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			u15: ina226@4a { /* u15 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			u92: ina226@4b { /* u92 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* PL_PMBUS */
+			u79: ina226@40 { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			u81: ina226@41 { /* u81 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u80: ina226@42 { /* u80 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u84: ina226@43 { /* u84 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u16: ina226@44 { /* u16 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u65: ina226@45 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u74: ina226@46 { /* u74 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u75: ina226@47 { /* u75 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* MAXIM_PMBUS - 00 */
+			max15301@a { /* u46 */
+				compatible = "maxim,max15301";
+				reg = <0xa>;
+			};
+			max15303@b { /* u4 */
+				compatible = "maxim,max15303";
+				reg = <0xb>;
+			};
+			max15303@10 { /* u13 */
+				compatible = "maxim,max15303";
+				reg = <0x10>;
+			};
+			max15301@13 { /* u47 */
+				compatible = "maxim,max15301";
+				reg = <0x13>;
+			};
+			max15303@14 { /* u7 */
+				compatible = "maxim,max15303";
+				reg = <0x14>;
+			};
+			max15303@15 { /* u6 */
+				compatible = "maxim,max15303";
+				reg = <0x15>;
+			};
+			max15303@16 { /* u10 */
+				compatible = "maxim,max15303";
+				reg = <0x16>;
+			};
+			max15303@17 { /* u9 */
+				compatible = "maxim,max15303";
+				reg = <0x17>;
+			};
+			max15301@18 { /* u63 */
+				compatible = "maxim,max15301";
+				reg = <0x18>;
+			};
+			max15303@1a { /* u49 */
+				compatible = "maxim,max15303";
+				reg = <0x1a>;
+			};
+			max15303@1d { /* u18 */
+				compatible = "maxim,max15303";
+				reg = <0x1d>;
+			};
+			max15303@20 { /* u8 */
+				compatible = "maxim,max15303";
+				status = "disabled"; /* unreachable */
+				reg = <0x20>;
+			};
+			max20751@72 { /* u95 */
+				compatible = "maxim,max20751";
+				reg = <0x72>;
+			};
+			max20751@73 { /* u96 */
+				compatible = "maxim,max20751";
+				reg = <0x73>;
+			};
+		};
+		/* Bus 3 is not connected */
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u69 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_4: out@4 {
+					/* refclk4 for PS-GT, used for PCIE slot */
+					reg = <4>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 for PS-GT, used for PCIE */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_7: out@7 {
+					/* refclk7 PL CLK74 */
+					reg = <7>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER SI570 - u42 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>; /* copy from zc702 */
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SI5328 - u20 */
+		};
+		/* 5 - 7 unconnected */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u135 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* HPC0_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* HPC1_IIC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SEP 3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SEP 2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SEP 1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SEP 0 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio1_wp_0_grp";
+			function = "sdio1_wp";
+		};
+
+		conf-wp {
+			groups = "sdio1_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux-sw {
+			function = "gpio0";
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+		};
+
+		conf-sw {
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-msp {
+			function = "gpio0";
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+		};
+
+		conf-msp {
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-pull-up {
+			pins = "MIO22", "MIO23";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO13", "MIO38";
+			bias-disable;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&psgtr {
+	status = "okay";
+	/* pcie, sata, usb3, dp */
+	clocks = <&si5341 0 5>, <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+	clock-names = "ref0", "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	/*
+	 * 1.0 revision has level shifter and this property should be
+	 * removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
new file mode 100644
index 0000000000..3c28130909
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevB
+ *
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-zcu102-revA.dts"
+
+/ {
+	model = "ZynqMP ZCU102 RevB";
+	compatible = "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
+
+&gem3 {
+	phy-handle = <&phyc>;
+	mdio: mdio {
+		phyc: ethernet-phy@c {
+			#phy-cells = <0x1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <0xc>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+		/* Cleanup from RevA */
+		/delete-node/ ethernet-phy@21;
+	};
+};
+
+/* Fix collision with u61 */
+&i2c0 {
+	i2c-mux@75 {
+		i2c@2 {
+			max15303@1b { /* u8 */
+				compatible = "maxim,max15303";
+				reg = <0x1b>;
+			};
+			/delete-node/ max15303@20;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
new file mode 100644
index 0000000000..5084ddcee0
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU104
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU104 RevA";
+	compatible = "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	clock_8t49n287_5: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clock_8t49n287_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_8t49n287_3: clk27 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@c {
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <0xc>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* Another connection to this bus via PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* 8T49N287 - u182 */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
+				compatible = "infineon,irps5401";
+				reg = <0x43>; /* pmbus / i2c 0x13 */
+			};
+			irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>; /* pmbus / i2c 0x14 */
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			tca6416_u97: gpio@20 {
+				compatible = "ti,tca6416";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				/*
+				 * IRQ not connected
+				 * Lines:
+				 * 0 - IRPS5401_ALERT_B
+				 * 1 - HDMI_8T49N241_INT_ALM
+				 * 2 - MAX6643_OT_B
+				 * 3 - MAX6643_FANFAIL_B
+				 * 5 - IIC_MUX_RESET_B
+				 * 6 - GEM3_EXP_RESET_B
+				 * 7 - FMC_LPC_PRSNT_M2C_B
+				 * 4, 10 - 17 - not connected
+				 */
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+		/* 3, 6 not connected */
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+	disable-wp;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
new file mode 100644
index 0000000000..b273bd1d92
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP ZCU104
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU104 RevC";
+	compatible = "xlnx,zynqmp-zcu104-revC", "xlnx,zynqmp-zcu104", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ina226 {
+		compatible = "iio-hwmon";
+		io-channels = <&u183 0>, <&u183 1>, <&u183 2>, <&u183 3>;
+	};
+
+	clock_8t49n287_5: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clock_8t49n287_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_8t49n287_3: clk27 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@c {
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <0xc>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u97: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - IRPS5401_ALERT_B
+		 * 1 - HDMI_8T49N241_INT_ALM
+		 * 2 - MAX6643_OT_B
+		 * 3 - MAX6643_FANFAIL_B
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 7 - FMC_LPC_PRSNT_M2C_B
+		 * 4, 10 - 17 - not connected
+		 */
+	};
+
+	/* Another connection to this bus via PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* 8T49N287 - u182 */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
+				compatible = "infineon,irps5401";
+				reg = <0x43>; /* pmbus / i2c 0x13 */
+			};
+			irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>; /* pmbus / i2c 0x14 */
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			u183: ina226@40 { /* u183 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+		/* 4, 6 not connected */
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+	disable-wp;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
new file mode 100644
index 0000000000..50c384aa25
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -0,0 +1,1053 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU106
+ *
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU106 RevA";
+	compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	refhdmi: refhdmi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <114285000>;
+	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@c {
+			#phy-cells = <1>;
+			reg = <0xc>;
+			compatible = "ethernet-phy-id2000.a231";
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u97: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* interrupt not connected */
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - SFP_SI5328_INT_ALM
+		 * 1 - HDMI_SI5328_INT_ALM
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 10 - FMC_HPC0_PRSNT_M2C_B
+		 * 11 - FMC_HPC1_PRSNT_M2C_B
+		 * 2-4, 7, 12-17 - not connected
+		 */
+	};
+
+	tca6416_u61: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - VCCPSPLL_EN
+		 * 1 - MGTRAVCC_EN
+		 * 2 - MGTRAVTT_EN
+		 * 3 - VCCPSDDRPLL_EN
+		 * 4 - MIO26_PMU_INPUT_LS
+		 * 5 - PL_PMBUS_ALERT
+		 * 6 - PS_PMBUS_ALERT
+		 * 7 - MAXIM_PMBUS_ALERT
+		 * 10 - PL_DDR4_VTERM_EN
+		 * 11 - PL_DDR4_VPP_2V5_EN
+		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
+		 * 13 - PS_DIMM_SUSPEND_EN
+		 * 14 - PS_DDR4_VTERM_EN
+		 * 15 - PS_DDR4_VPP_2V5_EN
+		 * 16 - 17 - not connected
+		 */
+	};
+
+	i2c-mux@75 { /* u60 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			u76: ina226@40 { /* u76 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			u77: ina226@41 { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u78: ina226@42 { /* u78 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u87: ina226@43 { /* u87 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u85: ina226@44 { /* u85 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u86: ina226@45 { /* u86 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u93: ina226@46 { /* u93 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u88: ina226@47 { /* u88 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			u15: ina226@4a { /* u15 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			u92: ina226@4b { /* u92 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* PL_PMBUS */
+			u79: ina226@40 { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			u81: ina226@41 { /* u81 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u80: ina226@42 { /* u80 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u84: ina226@43 { /* u84 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u16: ina226@44 { /* u16 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u65: ina226@45 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u74: ina226@46 { /* u74 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u75: ina226@47 { /* u75 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* MAXIM_PMBUS - 00 */
+			max15301@a { /* u46 */
+				compatible = "maxim,max15301";
+				reg = <0xa>;
+			};
+			max15303@b { /* u4 */
+				compatible = "maxim,max15303";
+				reg = <0xb>;
+			};
+			max15303@10 { /* u13 */
+				compatible = "maxim,max15303";
+				reg = <0x10>;
+			};
+			max15301@13 { /* u47 */
+				compatible = "maxim,max15301";
+				reg = <0x13>;
+			};
+			max15303@14 { /* u7 */
+				compatible = "maxim,max15303";
+				reg = <0x14>;
+			};
+			max15303@15 { /* u6 */
+				compatible = "maxim,max15303";
+				reg = <0x15>;
+			};
+			max15303@16 { /* u10 */
+				compatible = "maxim,max15303";
+				reg = <0x16>;
+			};
+			max15303@17 { /* u9 */
+				compatible = "maxim,max15303";
+				reg = <0x17>;
+			};
+			max15301@18 { /* u63 */
+				compatible = "maxim,max15301";
+				reg = <0x18>;
+			};
+			max15303@1a { /* u49 */
+				compatible = "maxim,max15303";
+				reg = <0x1a>;
+			};
+			max15303@1b { /* u8 */
+				compatible = "maxim,max15303";
+				reg = <0x1b>;
+			};
+			max15303@1d { /* u18 */
+				compatible = "maxim,max15303";
+				reg = <0x1d>;
+			};
+
+			max20751@72 { /* u95 */
+				compatible = "maxim,max20751";
+				reg = <0x72>;
+			};
+			max20751@73 { /* u96 */
+				compatible = "maxim,max20751";
+				reg = <0x73>;
+			};
+		};
+		/* Bus 3 is not connected */
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u69 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_7: out@7 {
+					/* refclk7 PL CLK74 */
+					reg = <7>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER SI570 - u42 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>; /* copy from zc702 */
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SI5328 - u20 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>; /* FAN controller */
+			temp@4c {/* lm96163 - u128 */
+				compatible = "national,lm96163";
+				reg = <0x4c>;
+			};
+		};
+		/* 6 - 7 unconnected */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u135 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* HPC0_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* HPC1_IIC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SEP 3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SEP 2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SEP 1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SEP 0 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio1_wp_0_grp";
+			function = "sdio1_wp";
+		};
+
+		conf-wp {
+			groups = "sdio1_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+		};
+
+		conf {
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-msp {
+			function = "gpio0";
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+		};
+
+		conf-msp {
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-pull-up {
+			pins = "MIO22";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO13", "MIO23", "MIO38";
+			bias-disable;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+
+	ports {
+		port@5 {
+			dpsub_dp_out: endpoint {
+				remote-endpoint = <&dpcon_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
new file mode 100644
index 0000000000..617cb0405a
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -0,0 +1,866 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU111
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU111 RevA";
+	compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+		/* Another 4GB connected to PL */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-u67 {
+		compatible = "iio-hwmon";
+		io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
+	};
+	ina226-u59 {
+		compatible = "iio-hwmon";
+		io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
+	};
+	ina226-u61 {
+		compatible = "iio-hwmon";
+		io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+	};
+	ina226-u60 {
+		compatible = "iio-hwmon";
+		io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+	};
+	ina226-u64 {
+		compatible = "iio-hwmon";
+		io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+	};
+	ina226-u69 {
+		compatible = "iio-hwmon";
+		io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
+	};
+	ina226-u66 {
+		compatible = "iio-hwmon";
+		io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u63 {
+		compatible = "iio-hwmon";
+		io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+	};
+	ina226-u3 {
+		compatible = "iio-hwmon";
+		io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
+	};
+	ina226-u71 {
+		compatible = "iio-hwmon";
+		io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u73 {
+		compatible = "iio-hwmon";
+		io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@c {
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <0xc>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u22 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u22: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* interrupt not connected */
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - MAX6643_OT_B
+		 * 1 - MAX6643_FANFAIL_B
+		 * 2 - MIO26_PMU_INPUT_LS
+		 * 4 - SFP_SI5382_INT_ALM
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 10 - FMCP_HSPC_PRSNT_M2C_B
+		 * 11 - CLK_SPI_MUX_SEL0
+		 * 12 - CLK_SPI_MUX_SEL1
+		 * 16 - IRPS5401_ALERT_B
+		 * 17 - INA226_PMBUS_ALERT
+		 * 3, 7, 13-15 - not connected
+		 */
+	};
+
+	i2c-mux@75 { /* u23 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			/* PMBUS_ALERT done via pca9544 */
+			u67: ina226@40 { /* u67 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u67";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			u59: ina226@41 { /* u59 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u59";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u61: ina226@42 { /* u61 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u61";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u60: ina226@43 { /* u60 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u60";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u64: ina226@45 { /* u64 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u64";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u69: ina226@46 { /* u69 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u69";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+			u66: ina226@47 { /* u66 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u66";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			u65: ina226@48 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x48>;
+				shunt-resistor = <5000>;
+			};
+			u63: ina226@49 { /* u63 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u63";
+				reg = <0x49>;
+				shunt-resistor = <5000>;
+			};
+			u3: ina226@4a { /* u3 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u3";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			u71: ina226@4b { /* u71 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u71";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+			u77: ina226@4c { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
+				reg = <0x4c>;
+				shunt-resistor = <5000>;
+			};
+			u73: ina226@4d { /* u73 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u73";
+				reg = <0x4d>;
+				shunt-resistor = <5000>;
+			};
+			u79: ina226@4e { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x4e>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* NC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */
+				compatible = "infineon,irps5401";
+				reg = <0x43>;
+			};
+			irps5401_44: irps5401@44 { /* IRPS5401 - u55 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>;
+			};
+			irps5401_45: irps5401@45 { /* IRPS5401 - u57 */
+				compatible = "infineon,irps5401";
+				reg = <0x45>;
+			};
+			/* u68 IR38064 +0 */
+			/* u70 IR38060 +1 */
+			/* u74 IR38060 +2 */
+			/* u75 IR38060 +6 */
+			/* J19 header too */
+
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* SYSMON */
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	i2c-mux@74 { /* u26 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u88 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u46 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 PL CLK100 */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER SI570 - u47 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SI5382 - u48 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+				sc18is603@2f { /* sc18is602 - u93 */
+					compatible = "nxp,sc18is603";
+					reg = <0x2f>;
+					/* 4 gpios for CS not handled by driver */
+					/*
+					 * USB2ANY cable or
+					 * LMK04208 - u90 or
+					 * LMX2594 - u102 or
+					 * LMX2594 - u103 or
+					 * LMX2594 - u104
+					 */
+				};
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* FMC connector */
+		};
+		/* 7 NC */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u27 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* FMCP_HSPC_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* NC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SFP3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SFP2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SFP1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SFP0 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+		};
+
+		conf {
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-msp {
+			function = "gpio0";
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+		};
+
+		conf-msp {
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-pull-up {
+			pins = "MIO22";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO13", "MIO23", "MIO38";
+			bias-disable;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, dp, usb3, sata */
+	clocks = <&si5341 0 0>, <&si5341 0 2>, <&si5341 0 3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	disable-wp;
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts
new file mode 100644
index 0000000000..c406017b03
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZC1275
+ *
+ * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZCU1275 RevA";
+	compatible = "xlnx,zynqmp-zcu1275-revA", "xlnx,zynqmp-zcu1275", "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
new file mode 100644
index 0000000000..b61fc99cd9
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -0,0 +1,1077 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP
+ *
+ * (C) Copyright 2014 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
+#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+/ {
+	compatible = "xlnx,zynqmp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table>;
+			reg = <0x0>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <600>;
+				min-residency-us = <10000>;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp00 {
+			opp-hz = /bits/ 64 <1199999988>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <599999994>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <399999996>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <299999997>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rproc_0_fw_image: memory@3ed00000 {
+			no-map;
+			reg = <0x0 0x3ed00000 0x0 0x40000>;
+		};
+
+		rproc_1_fw_image: memory@3ef00000 {
+			no-map;
+			reg = <0x0 0x3ef00000 0x0 0x40000>;
+		};
+	};
+
+	zynqmp_ipi: zynqmp_ipi {
+		bootph-all;
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		xlnx,ipi-id = <0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipi_mailbox_pmu1: mailbox@ff9905c0 {
+			bootph-all;
+			reg = <0x0 0xff9905c0 0x0 0x20>,
+			      <0x0 0xff9905e0 0x0 0x20>,
+			      <0x0 0xff990e80 0x0 0x20>,
+			      <0x0 0xff990ea0 0x0 0x20>;
+			reg-names = "local_request_region",
+				    "local_response_region",
+				    "remote_request_region",
+				    "remote_response_region";
+			#mbox-cells = <1>;
+			xlnx,ipi-id = <4>;
+		};
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		bootph-all;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	firmware {
+		zynqmp_firmware: zynqmp-firmware {
+			compatible = "xlnx,zynqmp-firmware";
+			#power-domain-cells = <1>;
+			method = "smc";
+			bootph-all;
+
+			zynqmp_power: zynqmp-power {
+				bootph-all;
+				compatible = "xlnx,zynqmp-power";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>;
+				mbox-names = "tx", "rx";
+			};
+
+			nvmem_firmware {
+				compatible = "xlnx,zynqmp-nvmem-fw";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				soc_revision: soc_revision@0 {
+					reg = <0x0 0x4>;
+				};
+			};
+
+			zynqmp_pcap: pcap {
+				compatible = "xlnx,zynqmp-pcap-fpga";
+			};
+
+			xlnx_aes: zynqmp-aes {
+				compatible = "xlnx,zynqmp-aes";
+			};
+
+			zynqmp_reset: reset-controller {
+				compatible = "xlnx,zynqmp-reset";
+				#reset-cells = <1>;
+			};
+
+			pinctrl0: pinctrl {
+				compatible = "xlnx,zynqmp-pinctrl";
+				status = "disabled";
+			};
+
+			modepin_gpio: gpio {
+				compatible = "xlnx,zynqmp-gpio-modepin";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	fpga_full: fpga-full {
+		compatible = "fpga-region";
+		fpga-mgr = <&zynqmp_pcap>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	remoteproc {
+		compatible = "xlnx,zynqmp-r5fss";
+		xlnx,cluster-mode = <1>;
+
+		r5f-0 {
+			compatible = "xlnx,zynqmp-r5f";
+			power-domains = <&zynqmp_firmware PD_RPU_0>;
+			memory-region = <&rproc_0_fw_image>;
+		};
+
+		r5f-1 {
+			compatible = "xlnx,zynqmp-r5f";
+			power-domains = <&zynqmp_firmware PD_RPU_1>;
+			memory-region = <&rproc_1_fw_image>;
+		};
+	};
+
+	amba: axi {
+		compatible = "simple-bus";
+		bootph-all;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		can0: can@ff060000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clock-names = "can_clk", "pclk";
+			reg = <0x0 0xff060000 0x0 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_0>;
+		};
+
+		can1: can@ff070000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clock-names = "can_clk", "pclk";
+			reg = <0x0 0xff070000 0x0 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_1>;
+		};
+
+		cci: cci@fd6e0000 {
+			compatible = "arm,cci-400";
+			status = "disabled";
+			reg = <0x0 0xfd6e0000 0x0 0x9000>;
+			ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		/* GDMA */
+		fpd_dma_chan1: dma-controller@fd500000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd500000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14e8>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan2: dma-controller@fd510000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd510000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14e9>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan3: dma-controller@fd520000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd520000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ea>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan4: dma-controller@fd530000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd530000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14eb>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan5: dma-controller@fd540000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd540000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ec>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan6: dma-controller@fd550000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd550000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ed>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan7: dma-controller@fd560000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd560000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ee>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan8: dma-controller@fd570000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd570000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ef>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		gic: interrupt-controller@f9010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			reg = <0x0 0xf9010000 0x0 0x10000>,
+			      <0x0 0xf9020000 0x0 0x20000>,
+			      <0x0 0xf9040000 0x0 0x20000>,
+			      <0x0 0xf9060000 0x0 0x20000>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		gpu: gpu@fd4b0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-mali", "arm,mali-400";
+			reg = <0x0 0xfd4b0000 0x0 0x10000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1";
+			clock-names = "bus", "core";
+			power-domains = <&zynqmp_firmware PD_GPU>;
+		};
+
+		/* LPDDMA default allows only secured access. inorder to enable
+		 * These dma channels, Users should ensure that these dma
+		 * Channels are allowed for non secure access.
+		 */
+		lpd_dma_chan1: dma-controller@ffa80000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa80000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x868>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan2: dma-controller@ffa90000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa90000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x869>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan3: dma-controller@ffaa0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaa0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86a>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan4: dma-controller@ffab0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffab0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86b>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan5: dma-controller@ffac0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffac0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86c>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan6: dma-controller@ffad0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffad0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86d>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan7: dma-controller@ffae0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffae0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86e>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan8: dma-controller@ffaf0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaf0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86f>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		mc: memory-controller@fd070000 {
+			compatible = "xlnx,zynqmp-ddrc-2.40a";
+			reg = <0x0 0xfd070000 0x0 0x30000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand0: nand-controller@ff100000 {
+			compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
+			status = "disabled";
+			reg = <0x0 0xff100000 0x0 0x1000>;
+			clock-names = "controller", "bus";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x872>;
+			power-domains = <&zynqmp_firmware PD_NAND>;
+		};
+
+		gem0: ethernet@ff0b0000 {
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff0b0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x874>;
+			power-domains = <&zynqmp_firmware PD_ETH_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
+			reset-names = "gem0_rst";
+		};
+
+		gem1: ethernet@ff0c0000 {
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff0c0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x875>;
+			power-domains = <&zynqmp_firmware PD_ETH_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
+			reset-names = "gem1_rst";
+		};
+
+		gem2: ethernet@ff0d0000 {
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff0d0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x876>;
+			power-domains = <&zynqmp_firmware PD_ETH_2>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
+			reset-names = "gem2_rst";
+		};
+
+		gem3: ethernet@ff0e0000 {
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff0e0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x877>;
+			power-domains = <&zynqmp_firmware PD_ETH_3>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
+			reset-names = "gem3_rst";
+		};
+
+		gpio: gpio@ff0a0000 {
+			compatible = "xlnx,zynqmp-gpio-1.0";
+			status = "disabled";
+			#gpio-cells = <0x2>;
+			gpio-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0xff0a0000 0x0 0x1000>;
+			power-domains = <&zynqmp_firmware PD_GPIO>;
+		};
+
+		i2c0: i2c@ff020000 {
+			compatible = "cdns,i2c-r1p14";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			reg = <0x0 0xff020000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_0>;
+		};
+
+		i2c1: i2c@ff030000 {
+			compatible = "cdns,i2c-r1p14";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			reg = <0x0 0xff030000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_1>;
+		};
+
+		pcie: pcie@fd0e0000 {
+			compatible = "xlnx,nwl-pcie-2.11";
+			status = "disabled";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			msi-controller;
+			device_type = "pci";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,	/* MSI_1 [63...32] */
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;	/* MSI_0 [31...0] */
+			interrupt-names = "misc", "dummy", "intx",
+					  "msi1", "msi0";
+			msi-parent = <&pcie>;
+			reg = <0x0 0xfd0e0000 0x0 0x1000>,
+			      <0x0 0xfd480000 0x0 0x1000>,
+			      <0x80 0x00000000 0x0 0x1000000>;
+			reg-names = "breg", "pcireg", "cfg";
+			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000>,/* non-prefetchable memory */
+				 <0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			iommus = <&smmu 0x4d0>;
+			power-domains = <&zynqmp_firmware PD_PCIE>;
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		qspi: spi@ff0f0000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-qspi-1.0";
+			status = "disabled";
+			clock-names = "ref_clk", "pclk";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			num-cs = <1>;
+			reg = <0x0 0xff0f0000 0x0 0x1000>,
+			      <0x0 0xc0000000 0x0 0x8000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x873>;
+			power-domains = <&zynqmp_firmware PD_QSPI>;
+		};
+
+		psgtr: phy@fd400000 {
+			compatible = "xlnx,zynqmp-psgtr-v1.1";
+			status = "disabled";
+			reg = <0x0 0xfd400000 0x0 0x40000>,
+			      <0x0 0xfd3d0000 0x0 0x1000>;
+			reg-names = "serdes", "siou";
+			#phy-cells = <4>;
+		};
+
+		rtc: rtc@ffa60000 {
+			compatible = "xlnx,zynqmp-rtc";
+			status = "disabled";
+			reg = <0x0 0xffa60000 0x0 0x100>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "alarm", "sec";
+			calibration = <0x7FFF>;
+		};
+
+		sata: ahci@fd0c0000 {
+			compatible = "ceva,ahci-1v84";
+			status = "disabled";
+			reg = <0x0 0xfd0c0000 0x0 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&zynqmp_firmware PD_SATA>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+			iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
+				 <&smmu 0x4c2>, <&smmu 0x4c3>;
+		};
+
+		sdhci0: mmc@ff160000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff160000 0x0 0x1000>;
+			clock-names = "clk_xin", "clk_ahb";
+			iommus = <&smmu 0x870>;
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd0", "clk_in_sd0";
+			power-domains = <&zynqmp_firmware PD_SD_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_SDIO0>;
+		};
+
+		sdhci1: mmc@ff170000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff170000 0x0 0x1000>;
+			clock-names = "clk_xin", "clk_ahb";
+			iommus = <&smmu 0x871>;
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd1", "clk_in_sd1";
+			power-domains = <&zynqmp_firmware PD_SD_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_SDIO1>;
+		};
+
+		smmu: iommu@fd800000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0xfd800000 0x0 0x20000>;
+			#iommu-cells = <1>;
+			status = "disabled";
+			#global-interrupts = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spi0: spi@ff040000 {
+			compatible = "cdns,spi-r1p6";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff040000 0x0 0x1000>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_0>;
+		};
+
+		spi1: spi@ff050000 {
+			compatible = "cdns,spi-r1p6";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff050000 0x0 0x1000>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_1>;
+		};
+
+		ttc0: timer@ff110000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff110000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_0>;
+		};
+
+		ttc1: timer@ff120000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff120000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_1>;
+		};
+
+		ttc2: timer@ff130000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff130000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_2>;
+		};
+
+		ttc3: timer@ff140000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff140000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_3>;
+		};
+
+		uart0: serial@ff000000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff000000 0x0 0x1000>;
+			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_0>;
+		};
+
+		uart1: serial@ff010000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff010000 0x0 0x1000>;
+			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_1>;
+		};
+
+		usb0: usb@ff9d0000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9d0000 0x0 0x100>;
+			power-domains = <&zynqmp_firmware PD_USB_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB0_APB>;
+			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+			reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>;
+			ranges;
+
+			dwc3_0: usb@fe200000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xfe200000 0x0 0x40000>;
+				interrupt-parent = <&gic>;
+				interrupt-names = "host", "peripheral", "otg";
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "bus_early", "ref";
+				iommus = <&smmu 0x860>;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
+				/* dma-coherent; */
+			};
+		};
+
+		usb1: usb@ff9e0000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9e0000 0x0 0x100>;
+			power-domains = <&zynqmp_firmware PD_USB_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
+			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+			ranges;
+
+			dwc3_1: usb@fe300000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xfe300000 0x0 0x40000>;
+				interrupt-parent = <&gic>;
+				interrupt-names = "host", "peripheral", "otg";
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "bus_early", "ref";
+				iommus = <&smmu 0x861>;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
+				/* dma-coherent; */
+			};
+		};
+
+		watchdog0: watchdog@fd4d0000 {
+			compatible = "cdns,wdt-r1p2";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x0 0xfd4d0000 0x0 0x1000>;
+			timeout-sec = <60>;
+			reset-on-timeout;
+		};
+
+		lpd_watchdog: watchdog@ff150000 {
+			compatible = "cdns,wdt-r1p2";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x0 0xff150000 0x0 0x1000>;
+			timeout-sec = <10>;
+		};
+
+		xilinx_ams: ams@ffa50000 {
+			compatible = "xlnx,zynqmp-ams";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xffa50000 0x0 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#io-channel-cells = <1>;
+			ranges = <0 0 0xffa50800 0x800>;
+
+			ams_ps: ams-ps@0 {
+				compatible = "xlnx,zynqmp-ams-ps";
+				status = "disabled";
+				reg = <0x0 0x400>;
+			};
+
+			ams_pl: ams-pl@400 {
+				compatible = "xlnx,zynqmp-ams-pl";
+				status = "disabled";
+				reg = <0x400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		zynqmp_dpdma: dma-controller@fd4c0000 {
+			compatible = "xlnx,zynqmp-dpdma";
+			status = "disabled";
+			reg = <0x0 0xfd4c0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			clock-names = "axi_clk";
+			power-domains = <&zynqmp_firmware PD_DP>;
+			#dma-cells = <1>;
+		};
+
+		zynqmp_dpsub: display@fd4a0000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-dpsub-1.7";
+			status = "disabled";
+			reg = <0x0 0xfd4a0000 0x0 0x1000>,
+			      <0x0 0xfd4aa000 0x0 0x1000>,
+			      <0x0 0xfd4ab000 0x0 0x1000>,
+			      <0x0 0xfd4ac000 0x0 0x1000>;
+			reg-names = "dp", "blend", "av_buf", "aud";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			clock-names = "dp_apb_clk", "dp_aud_clk",
+				      "dp_vtc_pixel_clk_in";
+			power-domains = <&zynqmp_firmware PD_DP>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
+			dma-names = "vid0", "vid1", "vid2", "gfx0";
+			dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					reg = <2>;
+				};
+				port@3 {
+					reg = <3>;
+				};
+				port@4 {
+					reg = <4>;
+				};
+				port@5 {
+					reg = <5>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/install.sh b/arch/arm64/boot/install.sh
new file mode 100755
index 0000000000..9b7a09808a
--- /dev/null
+++ b/arch/arm64/boot/install.sh
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for the AArch64 Linux port
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+
+if [ "$(basename $2)" = "Image.gz" ] || [ "$(basename $2)" = "vmlinuz.efi" ]
+then
+# Compressed install
+  echo "Installing compressed kernel"
+  base=vmlinuz
+else
+# Normal install
+  echo "Installing normal kernel"
+  base=vmlinux
+fi
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1